diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 184 |
1 files changed, 113 insertions, 71 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d8af858fe3f5..9d839a9c4b1a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -165,6 +165,7 @@ config MIPS_COBALT select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ config MACH_DECSTATION bool "DECstations" @@ -225,6 +226,7 @@ config MACH_JAZZ select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL select SYS_SUPPORTS_100HZ + select GENERIC_HARDIRQS_NO__DO_IRQ help This a family of machines based on the MIPS R4030 chipset which was used by several vendors to build RISC/os and Windows NT workstations. @@ -459,6 +461,11 @@ config PNX8550_JBS select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN +config PNX8550_STB810 + bool "Support for Philips PNX8550 based STB810 board" + select PNX8550 + select SYS_SUPPORTS_LITTLE_ENDIAN + config DDB5477 bool "NEC DDB Vrc-5477" select DDB5XXX_COMMON @@ -482,6 +489,7 @@ config MACH_VR41XX select SYS_HAS_CPU_VR41XX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select GENERIC_HARDIRQS_NO__DO_IRQ config PMC_YOSEMITE bool "PMC-Sierra Yosemite eval board" @@ -515,6 +523,7 @@ config QEMU select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select ARCH_SPARSEMEM_ENABLE + select GENERIC_HARDIRQS_NO__DO_IRQ help Qemu is a software emulator which among other architectures also can simulate a MIPS32 4Kc system. This patch adds support for the @@ -566,6 +575,7 @@ config SGI_IP27 select DMA_IP27 select EARLY_PRINTK select HW_HAS_PCI + select NR_CPUS_DEFAULT_64 select PCI_DOMAINS select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL @@ -603,6 +613,7 @@ config SIBYTE_BIGSUR bool "Sibyte BCM91480B-BigSur" select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_4 select PCI_DOMAINS select SIBYTE_BCM1x80 select SWAP_IO_SPACE @@ -614,6 +625,7 @@ config SIBYTE_SWARM bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -626,6 +638,7 @@ config SIBYTE_SENTOSA depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -659,6 +672,7 @@ config SIBYTE_PTSWARM depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -671,6 +685,7 @@ config SIBYTE_LITTLESUR depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -701,8 +716,8 @@ config SIBYTE_CRHONE select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_LITTLE_ENDIAN -config SNI_RM200_PCI - bool "SNI RM200 PCI" +config SNI_RM + bool "SNI RM200/300/400" select ARC if CPU_LITTLE_ENDIAN select ARC32 if CPU_LITTLE_ENDIAN select ARCH_MAY_HAVE_PC_FDC @@ -725,8 +740,8 @@ config SNI_RM200_PCI select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_LITTLE_ENDIAN help - The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens - Nixdorf Informationssysteme (SNI), parent company of Pyramid + The SNI RM200/300/400 are MIPS-based machines manufactured by + Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid Technology and now in turn merged with Fujitsu. Say Y here to support this machine type. @@ -754,6 +769,7 @@ config TOSHIBA_RBTX4927 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select TOSHIBA_BOARDS + select GENERIC_HARDIRQS_NO__DO_IRQ help This Toshiba board is based on the TX4927 processor. Say Y here to support this machine type @@ -773,29 +789,13 @@ config TOSHIBA_RBTX4938 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select TOSHIBA_BOARDS + select GENERIC_HARDIRQS_NO__DO_IRQ help This Toshiba board is based on the TX4938 processor. Say Y here to support this machine type endchoice -config KEXEC - bool "Kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similiarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. - source "arch/mips/ddb5xxx/Kconfig" source "arch/mips/gt64120/ev64120/Kconfig" source "arch/mips/jazz/Kconfig" @@ -819,6 +819,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config ARCH_HAS_ILOG2_U32 + bool + default n + +config ARCH_HAS_ILOG2_U64 + bool + default n + config GENERIC_FIND_NEXT_BIT bool default y @@ -926,6 +934,9 @@ config CPU_LITTLE_ENDIAN endchoice +config SYS_SUPPORTS_APM_EMULATION + bool + config SYS_SUPPORTS_BIG_ENDIAN bool @@ -993,6 +1004,7 @@ config SOC_AU1X00 bool select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_APM_EMULATION config PNX8550 bool @@ -1062,16 +1074,16 @@ config HAVE_STD_PC_SERIAL_PORT config ARC_CONSOLE bool "ARC console support" - depends on SGI_IP22 || SNI_RM200_PCI + depends on SGI_IP22 || SNI_RM config ARC_MEMORY bool - depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32 + depends on MACH_JAZZ || SNI_RM || SGI_IP32 default y config ARC_PROMLIB bool - depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 + depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP32 default y config ARC64 @@ -1522,6 +1534,8 @@ config MIPS_MT_SMTC select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_SRS select MIPS_MT + select NR_CPUS_DEFAULT_2 + select NR_CPUS_DEFAULT_8 select SMP select SYS_SUPPORTS_SMP help @@ -1549,6 +1563,20 @@ config MIPS_MT_FPAFF depends on MIPS_MT default y +config MIPS_MT_SMTC_INSTANT_REPLAY + bool "Low-latency Dispatch of Deferred SMTC IPIs" + depends on MIPS_MT_SMTC + default y + help + SMTC pseudo-interrupts between TCs are deferred and queued + if the target TC is interrupt-inhibited (IXMT). In the first + SMTC prototypes, these queued IPIs were serviced on return + to user mode, or on entry into the kernel idle loop. The + INSTANT_REPLAY option dispatches them as part of local_irq_restore() + processing, which adds runtime overhead (hence the option to turn + it off), but ensures that IPIs are handled promptly even under + heavy I/O interrupt load. + config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" depends on MIPS_VPE_LOADER @@ -1723,13 +1751,34 @@ config SMP config SYS_SUPPORTS_SMP bool +config NR_CPUS_DEFAULT_2 + bool + +config NR_CPUS_DEFAULT_4 + bool + +config NR_CPUS_DEFAULT_8 + bool + +config NR_CPUS_DEFAULT_16 + bool + +config NR_CPUS_DEFAULT_32 + bool + +config NR_CPUS_DEFAULT_64 + bool + config NR_CPUS int "Maximum number of CPUs (2-64)" range 2 64 depends on SMP - default "64" if SGI_IP27 - default "2" - default "8" if MIPS_MT_SMTC + default "2" if NR_CPUS_DEFAULT_2 + default "4" if NR_CPUS_DEFAULT_4 + default "8" if NR_CPUS_DEFAULT_8 + default "16" if NR_CPUS_DEFAULT_16 + default "32" if NR_CPUS_DEFAULT_32 + default "64" if NR_CPUS_DEFAULT_64 help This allows you to specify the maximum number of CPUs which this kernel will support. The maximum supported value is 32 for 32-bit @@ -1826,6 +1875,40 @@ config MIPS_INSANE_LARGE This will result in additional memory usage, so it is not recommended for normal users. +config KEXEC + bool "Kexec system call (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is indepedent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similiarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. As of this writing the exact hardware interface is + strongly in flux, so no good recommendation can be made. + +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS && BROKEN + default y + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via /proc/<pid>/seccomp, it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + + If unsure, say Y. Only embedded should say N here. + endmenu config RWSEM_GENERIC_SPINLOCK @@ -1992,52 +2075,11 @@ config BINFMT_ELF32 bool default y if MIPS32_O32 || MIPS32_N32 -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS && BROKEN - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. +endmenu - If unsure, say Y. Only embedded should say N here. +menu "Power management options" -config PM - bool "Power Management support (EXPERIMENTAL)" - depends on EXPERIMENTAL && SOC_AU1X00 - -config APM - tristate "Advanced Power Management Emulation" - depends on PM - ---help--- - APM is a BIOS specification for saving power using several different - techniques. This is mostly useful for battery powered systems with - APM compliant BIOSes. If you say Y here, the system time will be - reset after a RESUME operation, the /proc/apm device will provide - battery status information, and user-space programs will receive - notification of APM "events" (e.g. battery status change). - - In order to use APM, you will need supporting software. For location - and more information, read <file:Documentation/pm.txt> and the - Battery Powered Linux mini-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - This driver does not spin down disk drives (see the hdparm(8) - manpage ("man 8 hdparm") for that), and it doesn't turn off - VESA-compliant "green" monitors. - - Generally, if you don't have a battery in your machine, there isn't - much point in using this driver and you should say N. If you get - random kernel OOPSes or reboots that don't seem to be related to - anything, try disabling/enabling this option (or disabling/enabling - APM in your BIOS). +source "kernel/power/Kconfig" endmenu |
