diff options
Diffstat (limited to 'arch/m68k/include/asm')
| -rw-r--r-- | arch/m68k/include/asm/m5206sim.h | 10 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m520xsim.h | 33 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m523xsim.h | 42 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m5249sim.h | 18 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m5272sim.h | 17 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m527xsim.h | 53 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m528xsim.h | 40 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m5307sim.h | 10 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m532xsim.h | 35 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m5407sim.h | 6 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m54xxsim.h | 16 | ||||
| -rw-r--r-- | arch/m68k/include/asm/machdep.h | 5 | ||||
| -rw-r--r-- | arch/m68k/include/asm/mcfqspi.h | 11 | ||||
| -rw-r--r-- | arch/m68k/include/asm/mcfuart.h | 5 |
14 files changed, 232 insertions, 69 deletions
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h index 9015eadd5c00..69722366b084 100644 --- a/arch/m68k/include/asm/m5206sim.h +++ b/arch/m68k/include/asm/m5206sim.h @@ -100,11 +100,11 @@ #define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */ #if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x180) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */ #else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x140) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x180) /* Base address UART1 */ #endif /* @@ -112,6 +112,8 @@ */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ /* * Generic GPIO diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index eda62de7e607..17f2aab9cf97 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -48,8 +48,21 @@ #define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 36 /* Interrupt number for FEC RX */ +#define MCFINT_FECTX0 40 /* Interrupt number for FEC RX */ +#define MCFINT_FECENTC0 42 /* Interrupt number for FEC RX */ #define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) + /* * SDRAM configuration registers. */ @@ -144,15 +157,25 @@ /* * UART module. */ -#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xFC068000 /* Base address of UART2 */ +#define MCFUART_BASE0 0xFC060000 /* Base address of UART0 */ +#define MCFUART_BASE1 0xFC064000 /* Base address of UART1 */ +#define MCFUART_BASE2 0xFC068000 /* Base address of UART2 */ /* * FEC module. */ -#define MCFFEC_BASE 0xFC030000 /* Base of FEC ethernet */ -#define MCFFEC_SIZE 0x800 /* Register set size */ +#define MCFFEC_BASE0 0xFC030000 /* Base of FEC ethernet */ +#define MCFFEC_SIZE0 0x800 /* Register set size */ + +/* + * QSPI module. + */ +#define MCFQSPI_BASE 0xFC05C000 /* Base of QSPI module */ +#define MCFQSPI_SIZE 0x40 /* Register set size */ + +#define MCFQSPI_CS0 46 +#define MCFQSPI_CS1 47 +#define MCFQSPI_CS2 27 /* * Reset Control Unit. diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index 6235921eca4e..075062d4eecd 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -35,8 +35,23 @@ #define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ +#define MCFINT_UART1 14 /* Interrupt number for UART1 */ +#define MCFINT_UART2 15 /* Interrupt number for UART2 */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 23 /* Interrupt number for FEC */ +#define MCFINT_FECTX0 27 /* Interrupt number for FEC */ +#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */ +#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ + +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) /* * SDRAM configuration registers. @@ -50,8 +65,8 @@ /* * Reset Control Unit (relative to IPSBAR). */ -#define MCF_RCR 0x110000 -#define MCF_RSR 0x110001 +#define MCF_RCR (MCF_IPSBAR + 0x110000) +#define MCF_RSR (MCF_IPSBAR + 0x110001) #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ @@ -59,15 +74,26 @@ /* * UART module. */ -#define MCFUART_BASE1 (MCF_IPSBAR + 0x200) -#define MCFUART_BASE2 (MCF_IPSBAR + 0x240) -#define MCFUART_BASE3 (MCF_IPSBAR + 0x280) +#define MCFUART_BASE0 (MCF_IPSBAR + 0x200) +#define MCFUART_BASE1 (MCF_IPSBAR + 0x240) +#define MCFUART_BASE2 (MCF_IPSBAR + 0x280) /* * FEC ethernet module. */ -#define MCFFEC_BASE (MCF_IPSBAR + 0x1000) -#define MCFFEC_SIZE 0x800 +#define MCFFEC_BASE0 (MCF_IPSBAR + 0x1000) +#define MCFFEC_SIZE0 0x800 + +/* + * QSPI module. + */ +#define MCFQSPI_BASE (MCF_IPSBAR + 0x340) +#define MCFQSPI_SIZE 0x40 + +#define MCFQSPI_CS0 91 +#define MCFQSPI_CS1 92 +#define MCFQSPI_CS2 103 +#define MCFQSPI_CS3 99 /* * GPIO module. diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 805714ca8d7d..7f0c2c3660fd 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -76,8 +76,19 @@ /* * UART module. */ -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ + +/* + * QSPI module. + */ +#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */ +#define MCFQSPI_SIZE 0x40 /* Register set size */ + +#define MCFQSPI_CS0 29 +#define MCFQSPI_CS1 24 +#define MCFQSPI_CS2 21 +#define MCFQSPI_CS3 22 /* * DMA unit base addresses. @@ -108,6 +119,9 @@ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ + /* * General purpose IO registers (in MBAR2). */ diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h index 759c2b07a994..a58f1760d858 100644 --- a/arch/m68k/include/asm/m5272sim.h +++ b/arch/m68k/include/asm/m5272sim.h @@ -68,8 +68,8 @@ #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x100) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */ #define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */ @@ -88,6 +88,9 @@ #define MCFTIMER_BASE3 (MCF_MBAR + 0x240) /* Base address TIMER4 */ #define MCFTIMER_BASE4 (MCF_MBAR + 0x260) /* Base address TIMER3 */ +#define MCFFEC_BASE0 (MCF_MBAR + 0x840) /* Base FEC ethernet */ +#define MCFFEC_SIZE0 0x1d0 + /* * Define system peripheral IRQ usage. */ @@ -101,8 +104,8 @@ #define MCF_IRQ_TIMER2 70 /* Timer 2 */ #define MCF_IRQ_TIMER3 71 /* Timer 3 */ #define MCF_IRQ_TIMER4 72 /* Timer 4 */ -#define MCF_IRQ_UART1 73 /* UART 1 */ -#define MCF_IRQ_UART2 74 /* UART 2 */ +#define MCF_IRQ_UART0 73 /* UART 0 */ +#define MCF_IRQ_UART1 74 /* UART 1 */ #define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */ #define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */ #define MCF_IRQ_USB0 77 /* USB Endpoint 0 */ @@ -114,9 +117,9 @@ #define MCF_IRQ_USB6 83 /* USB Endpoint 6 */ #define MCF_IRQ_USB7 84 /* USB Endpoint 7 */ #define MCF_IRQ_DMA 85 /* DMA Controller */ -#define MCF_IRQ_ERX 86 /* Ethernet Receiver */ -#define MCF_IRQ_ETX 87 /* Ethernet Transmitter */ -#define MCF_IRQ_ENTC 88 /* Ethernet Non-Time Critical */ +#define MCF_IRQ_FECRX0 86 /* Ethernet Receiver */ +#define MCF_IRQ_FECTX0 87 /* Ethernet Transmitter */ +#define MCF_IRQ_FECENTC0 88 /* Ethernet Non-Time Critical */ #define MCF_IRQ_QSPI 89 /* Queued Serial Interface */ #define MCF_IRQ_EINT5 90 /* External Interrupt 5 */ #define MCF_IRQ_EINT6 91 /* External Interrupt 6 */ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 758810ef91ec..83db8106f50a 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -38,8 +38,29 @@ #define MCFINT_UART1 14 /* Interrupt number for UART1 */ #define MCFINT_UART2 15 /* Interrupt number for UART2 */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 23 /* Interrupt number for FEC0 */ +#define MCFINT_FECTX0 27 /* Interrupt number for FEC0 */ +#define MCFINT_FECENTC0 29 /* Interrupt number for FEC0 */ #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ +#define MCFINT2_VECBASE 128 /* Vector base number 2 */ +#define MCFINT2_FECRX1 23 /* Interrupt number for FEC1 */ +#define MCFINT2_FECTX1 27 /* Interrupt number for FEC1 */ +#define MCFINT2_FECENTC1 29 /* Interrupt number for FEC1 */ + +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) +#define MCF_IRQ_FECRX1 (MCFINT2_VECBASE + MCFINT2_FECRX1) +#define MCF_IRQ_FECTX1 (MCFINT2_VECBASE + MCFINT2_FECTX1) +#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) + /* * SDRAM configuration registers. */ @@ -72,9 +93,9 @@ /* * UART module. */ -#define MCFUART_BASE1 (MCF_IPSBAR + 0x200) -#define MCFUART_BASE2 (MCF_IPSBAR + 0x240) -#define MCFUART_BASE3 (MCF_IPSBAR + 0x280) +#define MCFUART_BASE0 (MCF_IPSBAR + 0x200) +#define MCFUART_BASE1 (MCF_IPSBAR + 0x240) +#define MCFUART_BASE2 (MCF_IPSBAR + 0x280) /* * FEC ethernet module. @@ -84,6 +105,28 @@ #define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800) #define MCFFEC_SIZE1 0x800 +/* + * QSPI module. + */ +#define MCFQSPI_BASE (MCF_IPSBAR + 0x340) +#define MCFQSPI_SIZE 0x40 + +#ifdef CONFIG_M5271 +#define MCFQSPI_CS0 91 +#define MCFQSPI_CS1 92 +#define MCFQSPI_CS2 99 +#define MCFQSPI_CS3 103 +#endif +#ifdef CONFIG_M5275 +#define MCFQSPI_CS0 59 +#define MCFQSPI_CS1 60 +#define MCFQSPI_CS2 61 +#define MCFQSPI_CS3 62 +#endif + +/* + * GPIO module. + */ #ifdef CONFIG_M5271 #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) #define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) @@ -285,8 +328,8 @@ /* * Reset Control Unit (relative to IPSBAR). */ -#define MCF_RCR 0x110000 -#define MCF_RSR 0x110001 +#define MCF_RCR (MCF_IPSBAR + 0x110000) +#define MCF_RSR (MCF_IPSBAR + 0x110001) #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index d798bd5df56c..569476fba18c 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -35,9 +35,24 @@ #define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_UART1 14 /* Interrupt number for UART1 */ +#define MCFINT_UART2 15 /* Interrupt number for UART2 */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 23 /* Interrupt number for FEC */ +#define MCFINT_FECTX0 27 /* Interrupt number for FEC */ +#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */ #define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) + /* * SDRAM configuration registers. */ @@ -58,15 +73,26 @@ /* * UART module. */ -#define MCFUART_BASE1 (MCF_IPSBAR + 0x00000200) -#define MCFUART_BASE2 (MCF_IPSBAR + 0x00000240) -#define MCFUART_BASE3 (MCF_IPSBAR + 0x00000280) +#define MCFUART_BASE0 (MCF_IPSBAR + 0x00000200) +#define MCFUART_BASE1 (MCF_IPSBAR + 0x00000240) +#define MCFUART_BASE2 (MCF_IPSBAR + 0x00000280) /* * FEC ethernet module. */ -#define MCFFEC_BASE (MCF_IPSBAR + 0x00001000) -#define MCFFEC_SIZE 0x800 +#define MCFFEC_BASE0 (MCF_IPSBAR + 0x00001000) +#define MCFFEC_SIZE0 0x800 + +/* + * QSPI module. + */ +#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) +#define MCFQSPI_SIZE 0x40 + +#define MCFQSPI_CS0 147 +#define MCFQSPI_CS1 148 +#define MCFQSPI_CS2 149 +#define MCFQSPI_CS3 150 /* * GPIO registers @@ -246,8 +272,8 @@ /* * Reset Control Unit (relative to IPSBAR). */ -#define MCF_RCR 0x110000 -#define MCF_RSR 0x110001 +#define MCF_RCR (MCF_IPSBAR + 0x110000) +#define MCF_RSR (MCF_IPSBAR + 0x110001) #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 8f8609fcc9b8..3bc3adaa7ee0 100644 --- a/arch/m68k/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h @@ -117,11 +117,11 @@ * UART module. */ #if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x200) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x1c0) /* Base address UART1 */ #else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ #endif /* @@ -176,6 +176,8 @@ */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ /****************************************************************************/ #endif /* m5307sim_h */ diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index ba4cc784f574..29b66e21413a 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -24,6 +24,19 @@ #define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 36 /* Interrupt number for FEC */ +#define MCFINT_FECTX0 40 /* Interrupt number for FEC */ +#define MCFINT_FECENTC0 42 /* Interrupt number for FEC */ + +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) #define MCF_WTM_WCR MCF_REG16(0xFC098000) @@ -82,9 +95,25 @@ /* * UART module. */ -#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */ +#define MCFUART_BASE0 0xFC060000 /* Base address of UART1 */ +#define MCFUART_BASE1 0xFC064000 /* Base address of UART2 */ +#define MCFUART_BASE2 0xFC068000 /* Base address of UART3 */ + +/* + * FEC module. + */ +#define MCFFEC_BASE0 0xFC030000 /* Base address of FEC0 */ +#define MCFFEC_SIZE0 0x800 /* Size of FEC0 region */ + +/* + * QSPI module. + */ +#define MCFQSPI_BASE 0xFC058000 /* Base address of QSPI */ +#define MCFQSPI_SIZE 0x40 /* Size of QSPI region */ + +#define MCFQSPI_CS0 84 +#define MCFQSPI_CS1 85 +#define MCFQSPI_CS2 86 /* * Timer module. diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index 51e00b00b8a6..79f58dd6a83d 100644 --- a/arch/m68k/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h @@ -85,8 +85,8 @@ #define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */ #define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */ -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ #define MCFSIM_PADDR (MCF_MBAR + 0x244) #define MCFSIM_PADAT (MCF_MBAR + 0x248) @@ -139,6 +139,8 @@ */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ /****************************************************************************/ #endif /* m5407sim_h */ diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h index 1ed8bfb02772..ae56b8848a9d 100644 --- a/arch/m68k/include/asm/m54xxsim.h +++ b/arch/m68k/include/asm/m54xxsim.h @@ -31,16 +31,20 @@ /* * UART module. */ -#define MCFUART_BASE1 0x8600 /* Base address of UART1 */ -#define MCFUART_BASE2 0x8700 /* Base address of UART2 */ -#define MCFUART_BASE3 0x8800 /* Base address of UART3 */ -#define MCFUART_BASE4 0x8900 /* Base address of UART4 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x8600) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x8700) /* Base address UART1 */ +#define MCFUART_BASE2 (MCF_MBAR + 0x8800) /* Base address UART2 */ +#define MCFUART_BASE3 (MCF_MBAR + 0x8900) /* Base address UART3 */ /* * Define system peripheral IRQ usage. */ -#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */ -#define MCF_IRQ_PROFILER (64 + 53) /* Slice Timer 1 */ +#define MCF_IRQ_TIMER (MCFINT_VECBASE + 54) /* Slice Timer 0 */ +#define MCF_IRQ_PROFILER (MCFINT_VECBASE + 53) /* Slice Timer 1 */ +#define MCF_IRQ_UART0 (MCFINT_VECBASE + 35) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + 34) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + 33) +#define MCF_IRQ_UART3 (MCFINT_VECBASE + 32) /* * Generic GPIO support diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h index 789f3b2de0e9..825c1c813196 100644 --- a/arch/m68k/include/asm/machdep.h +++ b/arch/m68k/include/asm/machdep.h @@ -22,8 +22,6 @@ extern unsigned int (*mach_get_ss)(void); extern int (*mach_get_rtc_pll)(struct rtc_pll_info *); extern int (*mach_set_rtc_pll)(struct rtc_pll_info *); extern int (*mach_set_clock_mmss)(unsigned long); -extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour, - int *min, int *sec); extern void (*mach_reset)( void ); extern void (*mach_halt)( void ); extern void (*mach_power_off)( void ); @@ -35,9 +33,8 @@ extern void (*mach_l2_flush) (int); extern void (*mach_beep) (unsigned int, unsigned int); /* Hardware clock functions */ -extern void hw_timer_init(void); +extern void hw_timer_init(irq_handler_t handler); extern unsigned long hw_timer_offset(void); -extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); extern void config_BSP(char *command, int len); diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h index 7fe631972f1f..7b51416ccae2 100644 --- a/arch/m68k/include/asm/mcfqspi.h +++ b/arch/m68k/include/asm/mcfqspi.h @@ -21,17 +21,6 @@ #ifndef mcfqspi_h #define mcfqspi_h -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) -#elif defined(CONFIG_M5249) -#define MCFQSPI_IOBASE (MCF_MBAR + 0x300) -#elif defined(CONFIG_M520x) -#define MCFQSPI_IOBASE 0xFC05C000 -#elif defined(CONFIG_M532x) -#define MCFQSPI_IOBASE 0xFC058000 -#endif -#define MCFQSPI_IOSIZE 0x40 - /** * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver * @setup: setup the control; allocate gpio's, etc. May be NULL. diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h index 2abedff0a694..2d3bc774b3c5 100644 --- a/arch/m68k/include/asm/mcfuart.h +++ b/arch/m68k/include/asm/mcfuart.h @@ -41,7 +41,10 @@ struct mcf_platform_uart { #define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ #define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ #define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ -#else +#endif +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5249) || defined(CONFIG_M5307) || \ + defined(CONFIG_M5407) #define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ #endif #define MCFUART_UIPR 0x34 /* Input Port (r) */ |
