diff options
Diffstat (limited to 'arch/m68k/include/asm')
| -rw-r--r-- | arch/m68k/include/asm/m5206sim.h | 10 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m520xsim.h | 9 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m523xsim.h | 7 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m5249sim.h | 5 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m5272sim.h | 3 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m527xsim.h | 6 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m528xsim.h | 7 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m5307sim.h | 11 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m532xsim.h | 7 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m5407sim.h | 3 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m54xxsim.h | 8 | ||||
| -rw-r--r-- | arch/m68k/include/asm/mcfuart.h | 43 |
12 files changed, 74 insertions, 45 deletions
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h index b882a210ee6e..aa7ee48d5059 100644 --- a/arch/m68k/include/asm/m5206sim.h +++ b/arch/m68k/include/asm/m5206sim.h @@ -90,6 +90,14 @@ #define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */ #define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */ +#if defined(CONFIG_NETtel) +#define MCFUART_BASE1 0x180 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#else +#define MCFUART_BASE1 0x140 /* Base address of UART1 */ +#define MCFUART_BASE2 0x180 /* Base address of UART2 */ +#endif + /* * Define system peripheral IRQ usage. */ @@ -97,7 +105,7 @@ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ /* - * Generic GPIO + * Generic GPIO */ #define MCFGPIO_PIN_MAX 8 #define MCFGPIO_IRQ_VECBASE -1 diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index 85b39edf41a0..8cd8bce38594 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -100,6 +100,7 @@ #define MCFGPIO_PCLRR_UART 0xFC0A402A #define MCFGPIO_PCLRR_FECH 0xFC0A402B #define MCFGPIO_PCLRR_FECL 0xFC0A402C + /* * Generic GPIO support */ @@ -112,7 +113,6 @@ #define MCFGPIO_PIN_MAX 80 #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE -/****************************************************************************/ #define MCF_GPIO_PAR_UART (0xA4036) #define MCF_GPIO_PAR_FECI2C (0xA4033) @@ -129,6 +129,13 @@ #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) /* + * UART module. + */ +#define MCFUART_BASE1 0x60000 /* Base address of UART1 */ +#define MCFUART_BASE2 0x64000 /* Base address of UART2 */ +#define MCFUART_BASE3 0x68000 /* Base address of UART2 */ + +/* * Reset Controll Unit. */ #define MCF_RCR 0xFC0A0000 diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index 9d597dcb29c0..4ec0f93a7ece 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -52,6 +52,13 @@ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ +/* + * UART module. + */ +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x240 /* Base address of UART2 */ +#define MCFUART_BASE3 0x280 /* Base address of UART3 */ + #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) #define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) #define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002) diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index c107228728db..21d0bbfbc0c9 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -59,6 +59,11 @@ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ +/* + * UART module. + */ +#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ +#define MCFUART_BASE2 0x200 /* Base address of UART2 */ /* * Some symbol defines for the above... diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h index 8cea714dee46..974c448c098e 100644 --- a/arch/m68k/include/asm/m5272sim.h +++ b/arch/m68k/include/asm/m5272sim.h @@ -65,6 +65,9 @@ #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ +#define MCFUART_BASE1 0x100 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ + #define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */ #define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 5223b71d3432..8a5a1ab57d01 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -58,6 +58,12 @@ #define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ #endif +/* + * UART module. + */ +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x240 /* Base address of UART2 */ +#define MCFUART_BASE3 0x280 /* Base address of UART3 */ #ifdef CONFIG_M5271 #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index 4e35f970f662..47c851ef78d3 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -44,6 +44,13 @@ #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ /* + * UART module. + */ +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x240 /* Base address of UART2 */ +#define MCFUART_BASE3 0x280 /* Base address of UART3 */ + +/* * GPIO registers */ #define MCFGPIO_PORTA (MCF_IPSBAR + 0x00100000) diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 008f36bd66c3..7003d7268ae8 100644 --- a/arch/m68k/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h @@ -97,6 +97,17 @@ #define MCFSIM_PADAT (MCF_MBAR + 0x248) /* + * UART module. + */ +#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ +#else +#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ +#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#endif + +/* * Generic GPIO support */ #define MCFGPIO_PIN_MAX 16 diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index b8126d3253e1..45c119c072db 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -103,6 +103,13 @@ #define ACR_CM_OFF_IMP (3<<5) #define ACR_WPROTECT (1<<2) +/* + * UART module. + */ +#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ +#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ +#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */ + /********************************************************************* * * Reset Controller Module diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index e07d4d8cf31f..ddfff88629fe 100644 --- a/arch/m68k/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h @@ -76,6 +76,9 @@ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ +#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ +#define MCFUART_BASE2 0x200 /* Base address of UART2 */ + #define MCFSIM_PADDR (MCF_MBAR + 0x244) #define MCFSIM_PADAT (MCF_MBAR + 0x248) diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h index 6072248916ac..a08a7ae776b1 100644 --- a/arch/m68k/include/asm/m54xxsim.h +++ b/arch/m68k/include/asm/m54xxsim.h @@ -25,6 +25,14 @@ #define MCFINTC_ICR0 0x40 /* Base ICR register */ /* + * UART module. + */ +#define MCFUART_BASE1 0x8600 /* Base address of UART1 */ +#define MCFUART_BASE2 0x8700 /* Base address of UART2 */ +#define MCFUART_BASE3 0x8800 /* Base address of UART3 */ +#define MCFUART_BASE4 0x8900 /* Base address of UART4 */ + +/* * Define system peripheral IRQ usage. */ #define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */ diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h index c67dacad7c1c..2abedff0a694 100644 --- a/arch/m68k/include/asm/mcfuart.h +++ b/arch/m68k/include/asm/mcfuart.h @@ -12,49 +12,6 @@ #define mcfuart_h /****************************************************************************/ -/* - * Define the base address of the UARTS within the MBAR address - * space. - */ -#if defined(CONFIG_M5272) -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ -#endif -#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x240 /* Base address of UART2 */ -#define MCFUART_BASE3 0x280 /* Base address of UART3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ -#endif -#elif defined(CONFIG_M520x) -#define MCFUART_BASE1 0x60000 /* Base address of UART1 */ -#define MCFUART_BASE2 0x64000 /* Base address of UART2 */ -#define MCFUART_BASE3 0x68000 /* Base address of UART2 */ -#elif defined(CONFIG_M532x) -#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ -#elif defined(CONFIG_M54xx) -#define MCFUART_BASE1 0x8600 /* on M54xx */ -#define MCFUART_BASE2 0x8700 /* on M54xx */ -#define MCFUART_BASE3 0x8800 /* on M54xx */ -#define MCFUART_BASE4 0x8900 /* on M54xx */ -#endif - - #include <linux/serial_core.h> #include <linux/platform_device.h> |
