diff options
Diffstat (limited to 'arch/ia64')
33 files changed, 1531 insertions, 566 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index a85ea9d37f05..ff7ae6b664e8 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -271,6 +271,25 @@ config SCHED_SMT Intel IA64 chips with MultiThreading at a cost of slightly increased overhead in some places. If unsure say N here. +config PERMIT_BSP_REMOVE + bool "Support removal of Bootstrap Processor" + depends on HOTPLUG_CPU + default n + ---help--- + Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU + support. + +config FORCE_CPEI_RETARGET + bool "Force assumption that CPEI can be re-targetted" + depends on PERMIT_BSP_REMOVE + default n + ---help--- + Say Y if you need to force the assumption that CPEI can be re-targetted to + any cpu in the system. This hint is available via ACPI 3.0 specifications. + Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP. + This option it useful to enable this feature on older BIOS's as well. + You can also enable this by using boot command line option force_cpei=1. + config PREEMPT bool "Preemptible Kernel" help diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index b40672bb3ab0..90e9c2e61bf4 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:18:49 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:10:42 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -58,17 +60,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -81,18 +102,17 @@ CONFIG_ITANIUM=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_BRL_EMU=y CONFIG_IA64_L1_CACHE_SHIFT=6 -# CONFIG_NUMA is not set -# CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set @@ -105,7 +125,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_VIRTUAL_MEM_MAP is not set CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y # CONFIG_IA64_MCA_RECOVERY is not set @@ -117,7 +142,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -125,6 +149,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -137,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -173,6 +199,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -206,6 +233,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -218,14 +250,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -286,20 +320,13 @@ CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=m # @@ -390,6 +417,7 @@ CONFIG_SCSI_SPI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -399,6 +427,7 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -409,14 +438,7 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -448,6 +470,7 @@ CONFIG_DM_ZERO=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -486,6 +509,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -524,6 +548,7 @@ CONFIG_EEPRO100=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -630,6 +655,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -681,6 +707,7 @@ CONFIG_DRM_R128=m # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -731,12 +758,19 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -754,6 +788,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -775,6 +810,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set @@ -830,6 +866,8 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m # CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -837,17 +875,18 @@ CONFIG_SND_PCM_OSS=m # Generic devices # CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -856,38 +895,38 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set CONFIG_SND_CS4281=m +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -929,12 +968,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -946,13 +988,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y @@ -972,6 +1016,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1046,7 +1091,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -1071,6 +1116,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1111,6 +1157,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1153,6 +1200,7 @@ CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_EXPERIMENTAL is not set @@ -1179,6 +1227,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1237,28 +1286,32 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_IA64_GRANULE_16MB is not set CONFIG_IA64_GRANULE_64MB=y # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 991c07b57c24..744fd2f79f61 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Wed Sep 28 08:27:29 2005 +# Linux kernel version: 2.6.16-rc5 +# Thu Mar 2 16:39:10 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -59,17 +61,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -82,6 +103,8 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set @@ -105,6 +128,9 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -117,13 +143,13 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -131,6 +157,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -145,6 +172,7 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -187,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -221,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -233,8 +267,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -275,7 +312,13 @@ CONFIG_FW_LOADER=m # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -295,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -327,6 +363,7 @@ CONFIG_BLK_DEV_IDESCSI=m # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set @@ -400,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -409,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -436,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -476,6 +510,7 @@ CONFIG_DM_MULTIPATH=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -497,6 +532,7 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices @@ -515,6 +551,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -564,6 +601,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -668,12 +706,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -689,6 +730,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -738,10 +780,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -749,6 +791,7 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -756,6 +799,12 @@ CONFIG_MMTIMER=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -765,6 +814,7 @@ CONFIG_MMTIMER=y # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -815,26 +865,28 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -843,40 +895,40 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=m # CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -922,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -939,12 +994,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -964,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1043,6 +1102,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1051,6 +1111,10 @@ CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1079,6 +1143,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1120,6 +1185,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1189,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1254,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_HP_SIMSCSI is not set # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig index a26781cfe8bf..d9146c31ea13 100644 --- a/arch/ia64/configs/sim_defconfig +++ b/arch/ia64/configs/sim_defconfig @@ -1,39 +1,52 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:13:41 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -# CONFIG_STANDALONE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -43,21 +56,45 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y +CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set CONFIG_IA64_HP_SIM=y # CONFIG_ITANIUM is not set @@ -66,17 +103,36 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set # CONFIG_IA64_PAGE_SIZE_16KB is not set CONFIG_IA64_PAGE_SIZE_64KB=y +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set -# CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=64 +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_VIRTUAL_MEM_MAP is not set CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y +# CONFIG_IA64_MCA_RECOVERY is not set # CONFIG_PERFMON is not set CONFIG_IA64_PALINFO=m @@ -84,7 +140,6 @@ CONFIG_IA64_PALINFO=m # Firmware Drivers # CONFIG_EFI_VARS=y -# CONFIG_SMBIOS is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -93,15 +148,98 @@ CONFIG_BINFMT_MISC=y # # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # # # Generic Driver Options # +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -118,12 +256,16 @@ CONFIG_BINFMT_MISC=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -133,6 +275,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -144,6 +287,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -157,13 +301,14 @@ CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # -# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_DEBUG is not set # @@ -174,77 +319,47 @@ CONFIG_SCSI_SPI_ATTRS=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support # # -# Networking support +# Network device support # -CONFIG_NET=y +# CONFIG_NETDEVICES is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # -# Networking options +# PHY device support # -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set # -# SCTP Configuration (EXPERIMENTAL) +# Ethernet (10 or 100Mbit) # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set +# CONFIG_NET_ETHERNET is not set # -# QoS and/or fair queueing +# Ethernet (1000 Mbit) # -# CONFIG_NET_SCHED is not set # -# Network testing +# Ethernet (10000 Mbit) # -# CONFIG_NET_PKTGEN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_NETDEVICES is not set # # ISDN subsystem @@ -274,16 +389,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -293,6 +398,15 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -310,7 +424,6 @@ CONFIG_HW_CONSOLE=y # CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_QIC02_TAPE is not set # # IPMI @@ -324,15 +437,19 @@ CONFIG_UNIX98_PTYS=y CONFIG_EFI_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set # CONFIG_AGP is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -340,10 +457,33 @@ CONFIG_EFI_RTC=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -362,7 +502,6 @@ CONFIG_EFI_RTC=y # Console display driver support # # CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # @@ -373,6 +512,12 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -380,22 +525,41 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -406,7 +570,8 @@ CONFIG_JBD=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -415,12 +580,12 @@ CONFIG_JBD=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -448,18 +613,22 @@ CONFIG_NFS_FS=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -476,10 +645,10 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -490,8 +659,13 @@ CONFIG_EFI_PARTITION=y # # Library routines # +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # HP Simulator drivers @@ -502,33 +676,50 @@ CONFIG_HP_SIMSERIAL_CONSOLE=y CONFIG_HP_SIMSCSI=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # -# CONFIG_IA64_GRANULE_16MB is not set -CONFIG_IA64_GRANULE_64MB=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_IA64_PRINT_HAZARDS is not set -# CONFIG_DISABLE_VHPT is not set +# CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_IA64_GRANULE_16MB is not set +CONFIG_IA64_GRANULE_64MB=y +# CONFIG_IA64_PRINT_HAZARDS is not set +# CONFIG_DISABLE_VHPT is not set # CONFIG_IA64_DEBUG_CMPXCHG is not set # CONFIG_IA64_DEBUG_IRQ is not set -CONFIG_DEBUG_INFO=y CONFIG_SYSVIPC_COMPAT=y # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 3cb503b659e6..8206752161bb 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc4 -# Fri Dec 2 10:33:48 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:06:38 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -88,7 +90,7 @@ CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_UNCACHED_ALLOCATOR=y -CONFIG_ZONE_DMA_IS_DMA32=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -126,6 +128,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -140,6 +143,7 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers @@ -166,6 +170,7 @@ CONFIG_ACPI=y CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -207,6 +212,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -247,6 +253,11 @@ CONFIG_IPV6=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -330,6 +341,7 @@ CONFIG_ATA_OVER_ETH=m # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -457,13 +469,7 @@ CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -CONFIG_SCSI_QLA22XX=y -CONFIG_SCSI_QLA2300=y -CONFIG_SCSI_QLA2322=y -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -545,6 +551,7 @@ CONFIG_NETDEVICES=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -632,12 +639,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -686,8 +696,8 @@ CONFIG_AGP=y CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set CONFIG_RAW_DRIVER=m -# CONFIG_HPET is not set CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -703,6 +713,12 @@ CONFIG_MMTIMER=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -791,12 +807,14 @@ CONFIG_USB_UHCI_HCD=m # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -816,6 +834,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -903,6 +922,10 @@ CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -931,6 +954,7 @@ CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -973,6 +997,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1041,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1111,19 +1137,21 @@ CONFIG_GENERIC_PENDING_IRQ=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 6859119bc9dd..766bf4955432 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc4 -# Fri Dec 2 16:06:32 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 15:49:18 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -88,7 +90,7 @@ CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ZONE_DMA_IS_DMA32=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -114,6 +116,8 @@ CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y +CONFIG_PERMIT_BSP_REMOVE=y +CONFIG_FORCE_CPEI_RETARGET=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -162,6 +166,7 @@ CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -203,6 +208,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -237,6 +243,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -326,6 +337,7 @@ CONFIG_BLK_DEV_INITRD=y # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -443,13 +455,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_QLOGIC_FC=y # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -572,6 +578,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -676,12 +683,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -694,6 +704,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -738,10 +749,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set # @@ -756,6 +767,12 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -765,6 +782,7 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -854,12 +872,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set @@ -873,6 +894,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -948,7 +970,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -980,6 +1002,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1021,6 +1044,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1090,6 +1114,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1157,18 +1182,20 @@ CONFIG_GENERIC_PENDING_IRQ=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 53899dc8eb53..949dc4670a0c 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -1,16 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:15:01 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 15:55:36 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -26,17 +23,18 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -45,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -59,17 +59,36 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_KMOD is not set # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set CONFIG_IA64_HP_ZX1=y @@ -82,18 +101,16 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_NUMA is not set -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=16 # CONFIG_HOTPLUG_CPU is not set @@ -106,7 +123,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y @@ -118,7 +142,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -126,6 +149,7 @@ CONFIG_BINFMT_MISC=y # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -138,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -179,6 +204,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -211,14 +237,17 @@ CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set # CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -CONFIG_IP_NF_ARPTABLES=y -# CONFIG_IP_NF_ARPFILTER is not set -# CONFIG_IP_NF_ARP_MANGLE is not set # # DCCP Configuration (EXPERIMENTAL) @@ -229,6 +258,11 @@ CONFIG_IP_NF_ARPTABLES=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -241,14 +275,16 @@ CONFIG_IP_NF_ARPTABLES=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -310,20 +346,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -407,13 +436,14 @@ CONFIG_SCSI_LOGGING=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -421,13 +451,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set @@ -438,17 +466,9 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -465,6 +485,7 @@ CONFIG_SCSI_QLA2XXX=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m @@ -505,6 +526,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -555,6 +577,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -652,6 +675,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -703,6 +727,7 @@ CONFIG_DRM_RADEON=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -753,12 +778,19 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -789,6 +821,7 @@ CONFIG_VIDEO_DEV=y # # Video Adapters # +# CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set @@ -796,14 +829,16 @@ CONFIG_VIDEO_DEV=y # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIDEO_ZR36120 is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_AUDIO_DECODER is not set +# CONFIG_VIDEO_DECODER is not set # # Radio Adapters @@ -824,7 +859,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -833,6 +867,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -848,10 +883,7 @@ CONFIG_FB_RADEON_DEBUG=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -860,6 +892,7 @@ CONFIG_FB_RADEON_DEBUG=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -892,6 +925,8 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -900,17 +935,18 @@ CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_MPU401_UART=y CONFIG_SND_OPL3_LIB=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -919,39 +955,39 @@ CONFIG_SND_AC97_BUS=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=y CONFIG_SND_FM801_TEA575X=y +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -997,12 +1033,15 @@ CONFIG_USB_UHCI_HCD=y # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1014,13 +1053,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1034,6 +1075,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1049,6 +1091,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_DABUSB is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set +# CONFIG_USB_ET61X251 is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set @@ -1113,7 +1156,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -1135,6 +1178,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_INOTIFY is not set @@ -1174,6 +1218,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1238,6 +1283,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1296,26 +1342,30 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +CONFIG_KPROBES=y # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -CONFIG_KPROBES=y +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set CONFIG_IA64_PRINT_HAZARDS=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index dcbc78a4cfa4..3e767288a745 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:13:03 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:02:28 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -59,17 +61,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -89,14 +110,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -CONFIG_NUMA=y -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y # CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y @@ -110,19 +127,29 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NUMA=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -130,6 +157,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -144,6 +172,7 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -186,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -220,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -232,14 +267,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -301,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -407,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -416,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -443,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -483,6 +510,7 @@ CONFIG_DM_MULTIPATH=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -523,6 +551,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -572,6 +601,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -676,12 +706,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -697,6 +730,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -710,6 +744,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_SGI_IOC4=y +# CONFIG_SERIAL_SGI_IOC3 is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -745,10 +780,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -756,6 +791,7 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -763,6 +799,12 @@ CONFIG_MMTIMER=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -772,6 +814,7 @@ CONFIG_MMTIMER=y # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -822,26 +865,28 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -850,40 +895,40 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=m # CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -929,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -946,12 +994,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -971,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1050,11 +1102,17 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices # CONFIG_SGI_IOC4=y +CONFIG_SGI_IOC3=m + +# +# EDAC - error detection and reporting (RAS) +# # # File systems @@ -1085,6 +1143,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1126,6 +1185,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1195,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1260,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_HP_SIMSCSI is not set # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index ecd44bdc8394..4722ec51c70c 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -284,19 +284,24 @@ acpi_parse_plat_int_src(acpi_table_entry_header * header, return 0; } +#ifdef CONFIG_HOTPLUG_CPU unsigned int can_cpei_retarget(void) { extern int cpe_vector; + extern unsigned int force_cpei_retarget; /* * Only if CPEI is supported and the override flag * is present, otherwise return that its re-targettable * if we are in polling mode. */ - if (cpe_vector > 0 && !acpi_cpei_override) - return 0; - else - return 1; + if (cpe_vector > 0) { + if (acpi_cpei_override || force_cpei_retarget) + return 1; + else + return 0; + } + return 1; } unsigned int is_cpu_cpei_target(unsigned int cpu) @@ -315,6 +320,7 @@ void set_cpei_target_cpu(unsigned int cpu) { acpi_cpei_phys_cpuid = cpu_physical_id(cpu); } +#endif unsigned int get_cpei_target_cpu(void) { diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c index 6ade3790ce07..e00b21514f7c 100644 --- a/arch/ia64/kernel/cyclone.c +++ b/arch/ia64/kernel/cyclone.c @@ -36,7 +36,7 @@ int __init init_cyclone_clock(void) u32* volatile cyclone_timer; /* Cyclone MPMC0 register */ if (!use_cyclone) - return -ENODEV; + return 0; printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 930fdfca6ddb..0e3eda99e549 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1102,9 +1102,6 @@ skip_rbs_switch: st8 [r2]=r8 st8 [r3]=r10 .work_pending: - tbit.nz p6,p0=r31,TIF_SIGDELAYED // signal delayed from MCA/INIT/NMI/PMI context? -(p6) br.cond.sptk.few .sigdelayed - ;; tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0? (p6) br.cond.sptk.few .notify #ifdef CONFIG_PREEMPT @@ -1131,17 +1128,6 @@ skip_rbs_switch: (pLvSys)br.cond.sptk.few .work_pending_syscall_end br.cond.sptk.many .work_processed_kernel // don't re-check -// There is a delayed signal that was detected in MCA/INIT/NMI/PMI context where -// it could not be delivered. Deliver it now. The signal might be for us and -// may set TIF_SIGPENDING, so redrive ia64_leave_* after processing the delayed -// signal. - -.sigdelayed: - br.call.sptk.many rp=do_sigdelayed - cmp.eq p6,p0=r0,r0 // p6 <- 1, always re-check -(pLvSys)br.cond.sptk.few .work_pending_syscall_end - br.cond.sptk.many .work_processed_kernel // re-check - .work_pending_syscall_end: adds r2=PT(R8)+16,r12 adds r3=PT(R10)+16,r12 diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index ac6055c83115..7a05b1cb2ad5 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -878,8 +878,7 @@ fsyscall_table: data8 0 // timer_delete data8 0 // clock_settime data8 fsys_clock_gettime // clock_gettime - #define __NR_syscall_last 1255 - .space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0 - - .org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls + // fill in zeros for the remaining entries + .zero: + .space fsyscall_table + 8*NR_syscalls - .zero, 0 diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 574084f343fa..8832c553230a 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -631,6 +631,7 @@ get_target_cpu (unsigned int gsi, int vector) { #ifdef CONFIG_SMP static int cpu = -1; + extern int cpe_vector; /* * In case of vector shared by multiple RTEs, all RTEs that @@ -653,6 +654,11 @@ get_target_cpu (unsigned int gsi, int vector) if (!cpu_online(smp_processor_id())) return cpu_physical_id(smp_processor_id()); +#ifdef CONFIG_ACPI + if (cpe_vector > 0 && vector == IA64_CPEP_VECTOR) + return get_cpei_target_cpu(); +#endif + #ifdef CONFIG_NUMA { int num_cpus, cpu_index, iosapic_index, numa_cpu, i = 0; diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index d33244c32759..5ce908ef9c95 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -163,8 +163,19 @@ void fixup_irqs(void) { unsigned int irq; extern void ia64_process_pending_intr(void); + extern void ia64_disable_timer(void); + extern volatile int time_keeper_id; + + ia64_disable_timer(); + + /* + * Find a new timesync master + */ + if (smp_processor_id() == time_keeper_id) { + time_keeper_id = first_cpu(cpu_online_map); + printk ("CPU %d is now promoted to time-keeper master\n", time_keeper_id); + } - ia64_set_itv(1<<16); /* * Phase 1: Locate irq's bound to this cpu and * relocate them for cpu removal. diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index 301f2e9d262e..dcd906fe5749 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -561,11 +561,12 @@ ENTRY(dirty_bit) ;; // avoid RAW on r18 mov ar.ccv=r18 // set compare value for cmpxchg or r25=_PAGE_D|_PAGE_A,r18 // set the dirty and accessed bits + tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit ;; - cmpxchg8.acq r26=[r17],r25,ar.ccv +(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only update if page is present mov r24=PAGE_SHIFT<<2 ;; - cmp.eq p6,p7=r26,r18 +(p6) cmp.eq p6,p7=r26,r18 // Only compare if page is present ;; (p6) itc.d r25 // install updated PTE ;; @@ -626,11 +627,12 @@ ENTRY(iaccess_bit) ;; mov ar.ccv=r18 // set compare value for cmpxchg or r25=_PAGE_A,r18 // set the accessed bit + tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit ;; - cmpxchg8.acq r26=[r17],r25,ar.ccv +(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page present mov r24=PAGE_SHIFT<<2 ;; - cmp.eq p6,p7=r26,r18 +(p6) cmp.eq p6,p7=r26,r18 // Only if page present ;; (p6) itc.i r25 // install updated PTE ;; @@ -680,11 +682,12 @@ ENTRY(daccess_bit) ;; // avoid RAW on r18 mov ar.ccv=r18 // set compare value for cmpxchg or r25=_PAGE_A,r18 // set the dirty bit + tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit ;; - cmpxchg8.acq r26=[r17],r25,ar.ccv +(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page is present mov r24=PAGE_SHIFT<<2 ;; - cmp.eq p6,p7=r26,r18 +(p6) cmp.eq p6,p7=r26,r18 // Only if page is present ;; (p6) itc.d r25 // install updated PTE /* @@ -1362,7 +1365,6 @@ END(debug_vector) // 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57) ENTRY(unaligned_access) DBG_FAULT(30) - mov r16=cr.ipsr mov r31=pr // prepare to save predicates ;; br.sptk.many dispatch_unaligned_handler diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index ee7eec9ee576..b57e723f194c 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -281,14 +281,10 @@ ia64_mca_log_sal_error_record(int sal_info_type) ia64_sal_clear_state_info(sal_info_type); } -/* - * platform dependent error handling - */ -#ifndef PLATFORM_MCA_HANDLERS - #ifdef CONFIG_ACPI int cpe_vector = -1; +int ia64_cpe_irq = -1; static irqreturn_t ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) @@ -377,8 +373,6 @@ ia64_mca_register_cpev (int cpev) } #endif /* CONFIG_ACPI */ -#endif /* PLATFORM_MCA_HANDLERS */ - /* * ia64_mca_cmc_vector_setup * @@ -630,6 +624,32 @@ copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat) *tnat |= (nat << tslot); } +/* Change the comm field on the MCA/INT task to include the pid that + * was interrupted, it makes for easier debugging. If that pid was 0 + * (swapper or nested MCA/INIT) then use the start of the previous comm + * field suffixed with its cpu. + */ + +static void +ia64_mca_modify_comm(const task_t *previous_current) +{ + char *p, comm[sizeof(current->comm)]; + if (previous_current->pid) + snprintf(comm, sizeof(comm), "%s %d", + current->comm, previous_current->pid); + else { + int l; + if ((p = strchr(previous_current->comm, ' '))) + l = p - previous_current->comm; + else + l = strlen(previous_current->comm); + snprintf(comm, sizeof(comm), "%s %*s %d", + current->comm, l, previous_current->comm, + task_thread_info(previous_current)->cpu); + } + memcpy(current->comm, comm, sizeof(current->comm)); +} + /* On entry to this routine, we are running on the per cpu stack, see * mca_asm.h. The original stack has not been touched by this event. Some of * the original stack's registers will be in the RBS on this stack. This stack @@ -648,7 +668,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, struct ia64_sal_os_state *sos, const char *type) { - char *p, comm[sizeof(current->comm)]; + char *p; ia64_va va; extern char ia64_leave_kernel[]; /* Need asm address, not function descriptor */ const pal_min_state_area_t *ms = sos->pal_min_state; @@ -721,6 +741,10 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, /* Verify the previous stack state before we change it */ if (user_mode(regs)) { msg = "occurred in user space"; + /* previous_current is guaranteed to be valid when the task was + * in user space, so ... + */ + ia64_mca_modify_comm(previous_current); goto no_mod; } if (r13 != sos->prev_IA64_KR_CURRENT) { @@ -750,25 +774,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, goto no_mod; } - /* Change the comm field on the MCA/INT task to include the pid that - * was interrupted, it makes for easier debugging. If that pid was 0 - * (swapper or nested MCA/INIT) then use the start of the previous comm - * field suffixed with its cpu. - */ - if (previous_current->pid) - snprintf(comm, sizeof(comm), "%s %d", - current->comm, previous_current->pid); - else { - int l; - if ((p = strchr(previous_current->comm, ' '))) - l = p - previous_current->comm; - else - l = strlen(previous_current->comm); - snprintf(comm, sizeof(comm), "%s %*s %d", - current->comm, l, previous_current->comm, - task_thread_info(previous_current)->cpu); - } - memcpy(current->comm, comm, sizeof(current->comm)); + ia64_mca_modify_comm(previous_current); /* Make the original task look blocked. First stack a struct pt_regs, * describing the state at the time of interrupt. mca_asm.S built a @@ -908,7 +914,7 @@ no_mod: static void ia64_wait_for_slaves(int monarch) { - int c, wait = 0; + int c, wait = 0, missing = 0; for_each_online_cpu(c) { if (c == monarch) continue; @@ -919,15 +925,32 @@ ia64_wait_for_slaves(int monarch) } } if (!wait) - return; + goto all_in; for_each_online_cpu(c) { if (c == monarch) continue; if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { udelay(5*1000000); /* wait 5 seconds for slaves (arbitrary) */ + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) + missing = 1; break; } } + if (!missing) + goto all_in; + printk(KERN_INFO "OS MCA slave did not rendezvous on cpu"); + for_each_online_cpu(c) { + if (c == monarch) + continue; + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) + printk(" %d", c); + } + printk("\n"); + return; + +all_in: + printk(KERN_INFO "All OS MCA slaves have reached rendezvous\n"); + return; } /* @@ -953,6 +976,10 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, task_t *previous_current; oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ + console_loglevel = 15; /* make sure printks make it to console */ + printk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d monarch=%ld\n", + sos->proc_state_param, cpu, sos->monarch); + previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); monarch_cpu = cpu; if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0) @@ -1444,11 +1471,13 @@ void __devinit ia64_mca_cpu_init(void *cpu_data) { void *pal_vaddr; + static int first_time = 1; - if (smp_processor_id() == 0) { + if (first_time) { void *mca_data; int cpu; + first_time = 0; mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu) * NR_CPUS + KERNEL_STACK_SIZE); mca_data = (void *)(((unsigned long)mca_data + @@ -1704,6 +1733,7 @@ ia64_mca_late_init(void) desc = irq_descp(irq); desc->status |= IRQ_PER_CPU; setup_irq(irq, &mca_cpe_irqaction); + ia64_cpe_irq = irq; } ia64_mca_register_cpev(cpe_vector); IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n", __FUNCTION__); diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index 8fd93afa75a7..e883d85906db 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -123,8 +123,9 @@ mca_page_isolate(unsigned long paddr) void mca_handler_bh(unsigned long paddr) { - printk(KERN_DEBUG "OS_MCA: process [pid: %d](%s) encounters MCA.\n", - current->pid, current->comm); + printk(KERN_ERR + "OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n", + current->pid, current->comm, paddr); spin_lock(&mca_bh_lock); switch (mca_page_isolate(paddr)) { @@ -132,7 +133,7 @@ mca_handler_bh(unsigned long paddr) printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr); break; case ISOLATE_NG: - printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr); + printk(KERN_CRIT "Page isolation: ( %lx ) failure.\n", paddr); break; default: break; @@ -567,10 +568,15 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, return 0; /* - * If there is no bus error, record is weird but we need not to recover. + * The cache check and bus check bits have four possible states + * cc bc + * 0 0 Weird record, not recovered + * 1 0 Cache error, not recovered + * 0 1 I/O error, attempt recovery + * 1 1 Memory error, attempt recovery */ if (psp->bc == 0 || pbci == NULL) - return 1; + return 0; /* * Sorry, we cannot handle so many. diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 9c5194b385da..077f21216b65 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -6722,6 +6722,7 @@ __initcall(pfm_init); void pfm_init_percpu (void) { + static int first_time=1; /* * make sure no measurement is active * (may inherit programmed PMCs from EFI). @@ -6734,8 +6735,10 @@ pfm_init_percpu (void) */ pfm_unfreeze_pmu(); - if (smp_processor_id() == 0) + if (first_time) { register_percpu_irq(IA64_PERFMON_VECTOR, &perfmon_irqaction); + first_time=0; + } ia64_setreg(_IA64_REG_CR_PMV, IA64_PERFMON_VECTOR); ia64_srlz_d(); diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 463f6bb44d07..1d7903ee2126 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -588,104 +588,3 @@ ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall) } return 0; } - -/* Set a delayed signal that was detected in MCA/INIT/NMI/PMI context where it - * could not be delivered. It is important that the target process is not - * allowed to do any more work in user space. Possible cases for the target - * process: - * - * - It is sleeping and will wake up soon. Store the data in the current task, - * the signal will be sent when the current task returns from the next - * interrupt. - * - * - It is running in user context. Store the data in the current task, the - * signal will be sent when the current task returns from the next interrupt. - * - * - It is running in kernel context on this or another cpu and will return to - * user context. Store the data in the target task, the signal will be sent - * to itself when the target task returns to user space. - * - * - It is running in kernel context on this cpu and will sleep before - * returning to user context. Because this is also the current task, the - * signal will not get delivered and the task could sleep indefinitely. - * Store the data in the idle task for this cpu, the signal will be sent - * after the idle task processes its next interrupt. - * - * To cover all cases, store the data in the target task, the current task and - * the idle task on this cpu. Whatever happens, the signal will be delivered - * to the target task before it can do any useful user space work. Multiple - * deliveries have no unwanted side effects. - * - * Note: This code is executed in MCA/INIT/NMI/PMI context, with interrupts - * disabled. It must not take any locks nor use kernel structures or services - * that require locks. - */ - -/* To ensure that we get the right pid, check its start time. To avoid extra - * include files in thread_info.h, convert the task start_time to unsigned long, - * giving us a cycle time of > 580 years. - */ -static inline unsigned long -start_time_ul(const struct task_struct *t) -{ - return t->start_time.tv_sec * NSEC_PER_SEC + t->start_time.tv_nsec; -} - -void -set_sigdelayed(pid_t pid, int signo, int code, void __user *addr) -{ - struct task_struct *t; - unsigned long start_time = 0; - int i; - - for (i = 1; i <= 3; ++i) { - switch (i) { - case 1: - t = find_task_by_pid(pid); - if (t) - start_time = start_time_ul(t); - break; - case 2: - t = current; - break; - default: - t = idle_task(smp_processor_id()); - break; - } - - if (!t) - return; - task_thread_info(t)->sigdelayed.signo = signo; - task_thread_info(t)->sigdelayed.code = code; - task_thread_info(t)->sigdelayed.addr = addr; - task_thread_info(t)->sigdelayed.start_time = start_time; - task_thread_info(t)->sigdelayed.pid = pid; - wmb(); - set_tsk_thread_flag(t, TIF_SIGDELAYED); - } -} - -/* Called from entry.S when it detects TIF_SIGDELAYED, a delayed signal that - * was detected in MCA/INIT/NMI/PMI context where it could not be delivered. - */ - -void -do_sigdelayed(void) -{ - struct siginfo siginfo; - pid_t pid; - struct task_struct *t; - - clear_thread_flag(TIF_SIGDELAYED); - memset(&siginfo, 0, sizeof(siginfo)); - siginfo.si_signo = current_thread_info()->sigdelayed.signo; - siginfo.si_code = current_thread_info()->sigdelayed.code; - siginfo.si_addr = current_thread_info()->sigdelayed.addr; - pid = current_thread_info()->sigdelayed.pid; - t = find_task_by_pid(pid); - if (!t) - return; - if (current_thread_info()->sigdelayed.start_time != start_time_ul(t)) - return; - force_sig_info(siginfo.si_signo, &siginfo, t); -} diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index b681ef34a86e..c4b633b36dab 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -70,6 +70,12 @@ #endif #ifdef CONFIG_HOTPLUG_CPU +#ifdef CONFIG_PERMIT_BSP_REMOVE +#define bsp_remove_ok 1 +#else +#define bsp_remove_ok 0 +#endif + /* * Store all idle threads, this can be reused instead of creating * a new thread. Also avoids complicated thread destroy functionality @@ -104,7 +110,7 @@ struct sal_to_os_boot *sal_state_for_booting_cpu = &sal_boot_rendez_state[0]; /* * ITC synchronization related stuff: */ -#define MASTER 0 +#define MASTER (0) #define SLAVE (SMP_CACHE_BYTES/8) #define NUM_ROUNDS 64 /* magic value */ @@ -151,6 +157,27 @@ char __initdata no_int_routing; unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */ +#ifdef CONFIG_FORCE_CPEI_RETARGET +#define CPEI_OVERRIDE_DEFAULT (1) +#else +#define CPEI_OVERRIDE_DEFAULT (0) +#endif + +unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT; + +static int __init +cmdl_force_cpei(char *str) +{ + int value=0; + + get_option (&str, &value); + force_cpei_retarget = value; + + return 1; +} + +__setup("force_cpei=", cmdl_force_cpei); + static int __init nointroute (char *str) { @@ -161,6 +188,27 @@ nointroute (char *str) __setup("nointroute", nointroute); +static void fix_b0_for_bsp(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + int cpuid; + static int fix_bsp_b0 = 1; + + cpuid = smp_processor_id(); + + /* + * Cache the b0 value on the first AP that comes up + */ + if (!(fix_bsp_b0 && cpuid)) + return; + + sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0]; + printk ("Fixed BSP b0 value from CPU %d\n", cpuid); + + fix_bsp_b0 = 0; +#endif +} + void sync_master (void *arg) { @@ -327,8 +375,9 @@ smp_setup_percpu_timer (void) static void __devinit smp_callin (void) { - int cpuid, phys_id; + int cpuid, phys_id, itc_master; extern void ia64_init_itm(void); + extern volatile int time_keeper_id; #ifdef CONFIG_PERFMON extern void pfm_init_percpu(void); @@ -336,6 +385,7 @@ smp_callin (void) cpuid = smp_processor_id(); phys_id = hard_smp_processor_id(); + itc_master = time_keeper_id; if (cpu_online(cpuid)) { printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n", @@ -343,6 +393,8 @@ smp_callin (void) BUG(); } + fix_b0_for_bsp(); + lock_ipi_calllock(); cpu_set(cpuid, cpu_online_map); unlock_ipi_calllock(); @@ -365,8 +417,8 @@ smp_callin (void) * calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls * local_bh_enable(), which bugs out if irqs are not enabled... */ - Dprintk("Going to syncup ITC with BP.\n"); - ia64_sync_itc(0); + Dprintk("Going to syncup ITC with ITC Master.\n"); + ia64_sync_itc(itc_master); } /* @@ -635,6 +687,47 @@ remove_siblinginfo(int cpu) } extern void fixup_irqs(void); + +int migrate_platform_irqs(unsigned int cpu) +{ + int new_cpei_cpu; + irq_desc_t *desc = NULL; + cpumask_t mask; + int retval = 0; + + /* + * dont permit CPEI target to removed. + */ + if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) { + printk ("CPU (%d) is CPEI Target\n", cpu); + if (can_cpei_retarget()) { + /* + * Now re-target the CPEI to a different processor + */ + new_cpei_cpu = any_online_cpu(cpu_online_map); + mask = cpumask_of_cpu(new_cpei_cpu); + set_cpei_target_cpu(new_cpei_cpu); + desc = irq_descp(ia64_cpe_irq); + /* + * Switch for now, immediatly, we need to do fake intr + * as other interrupts, but need to study CPEI behaviour with + * polling before making changes. + */ + if (desc) { + desc->handler->disable(ia64_cpe_irq); + desc->handler->set_affinity(ia64_cpe_irq, mask); + desc->handler->enable(ia64_cpe_irq); + printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu); + } + } + if (!desc) { + printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu); + retval = -EBUSY; + } + } + return retval; +} + /* must be called with cpucontrol mutex held */ int __cpu_disable(void) { @@ -643,8 +736,17 @@ int __cpu_disable(void) /* * dont permit boot processor for now */ - if (cpu == 0) - return -EBUSY; + if (cpu == 0 && !bsp_remove_ok) { + printk ("Your platform does not support removal of BSP\n"); + return (-EBUSY); + } + + cpu_clear(cpu, cpu_online_map); + + if (migrate_platform_irqs(cpu)) { + cpu_set(cpu, cpu_online_map); + return (-EBUSY); + } remove_siblinginfo(cpu); cpu_clear(cpu, cpu_online_map); diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 307d01e15b2e..ac167436e936 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -32,7 +32,7 @@ extern unsigned long wall_jiffies; -#define TIME_KEEPER_ID 0 /* smp_processor_id() of time-keeper */ +volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */ #ifdef CONFIG_IA64_DEBUG_IRQ @@ -71,7 +71,7 @@ timer_interrupt (int irq, void *dev_id, struct pt_regs *regs) new_itm += local_cpu_data->itm_delta; - if (smp_processor_id() == TIME_KEEPER_ID) { + if (smp_processor_id() == time_keeper_id) { /* * Here we are in the timer irq handler. We have irqs locally * disabled, but we don't know if the timer_bh is running on @@ -236,6 +236,11 @@ static struct irqaction timer_irqaction = { .name = "timer" }; +void __devinit ia64_disable_timer(void) +{ + ia64_set_itv(1 << 16); +} + void __init time_init (void) { diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 6e5eea19fa67..3b6fd798c4d6 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,7 +36,7 @@ int arch_register_cpu(int num) parent = &sysfs_nodes[cpu_to_node(num)]; #endif /* CONFIG_NUMA */ -#ifdef CONFIG_ACPI +#if defined (CONFIG_ACPI) && defined (CONFIG_HOTPLUG_CPU) /* * If CPEI cannot be re-targetted, and this is * CPEI target, then dont create the control file diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c index f9e0ae936d1a..1e357550c776 100644 --- a/arch/ia64/kernel/unaligned.c +++ b/arch/ia64/kernel/unaligned.c @@ -24,7 +24,7 @@ #include <asm/uaccess.h> #include <asm/unaligned.h> -extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn)); +extern void die_if_kernel(char *str, struct pt_regs *regs, long err); #undef DEBUG_UNALIGNED_TRAP @@ -53,6 +53,15 @@ dump (const char *str, void *vp, size_t len) #define SIGN_EXT9 0xffffffffffffff00ul /* + * sysctl settable hook which tells the kernel whether to honor the + * IA64_THREAD_UAC_NOPRINT prctl. Because this is user settable, we want + * to allow the super user to enable/disable this for security reasons + * (i.e. don't allow attacker to fill up logs with unaligned accesses). + */ +int no_unaligned_warning; +static int noprint_warning; + +/* * For M-unit: * * opcode | m | x6 | @@ -1324,8 +1333,9 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0) goto force_sigbus; - if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT) - && within_logging_rate_limit()) + if (!no_unaligned_warning && + !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) && + within_logging_rate_limit()) { char buf[200]; /* comm[] is at most 16 bytes... */ size_t len; @@ -1340,7 +1350,22 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) if (user_mode(regs)) tty_write_message(current->signal->tty, buf); buf[len-1] = '\0'; /* drop '\r' */ - printk(KERN_WARNING "%s", buf); /* watch for command names containing %s */ + /* watch for command names containing %s */ + printk(KERN_WARNING "%s", buf); + } else { + if (no_unaligned_warning && !noprint_warning) { + noprint_warning = 1; + printk(KERN_WARNING "%s(%d) encountered an " + "unaligned exception which required\n" + "kernel assistance, which degrades " + "the performance of the application.\n" + "Unaligned exception warnings have " + "been disabled by the system " + "administrator\n" + "echo 0 > /proc/sys/kernel/ignore-" + "unaligned-usertrap to re-enable\n", + current->comm, current->pid); + } } } else { if (within_logging_rate_limit()) diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index acaaec4e4681..9855ba318094 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -181,13 +181,15 @@ per_cpu_init (void) { void *cpu_data; int cpu; + static int first_time=1; /* * get_free_pages() cannot be used before cpu_init() done. BSP * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls * get_zeroed_page(). */ - if (smp_processor_id() == 0) { + if (first_time) { + first_time=0; cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS, PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); for (cpu = 0; cpu < NR_CPUS; cpu++) { diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index c87d6d1d5813..573d5cc63e2b 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -528,12 +528,17 @@ void __init find_memory(void) void *per_cpu_init(void) { int cpu; + static int first_time = 1; + if (smp_processor_id() != 0) return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; - for (cpu = 0; cpu < NR_CPUS; cpu++) - per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + if (first_time) { + first_time = 0; + for (cpu = 0; cpu < NR_CPUS; cpu++) + per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + } return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; } diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 0b30ca006286..9ba32b2d96d0 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -579,7 +579,7 @@ pcibios_align_resource (void *data, struct resource *res, char * __init pcibios_setup (char *str) { - return NULL; + return str; } int diff --git a/arch/ia64/sn/kernel/Makefile b/arch/ia64/sn/kernel/Makefile index 3e9b4eea7418..ab9c48c88012 100644 --- a/arch/ia64/sn/kernel/Makefile +++ b/arch/ia64/sn/kernel/Makefile @@ -10,7 +10,8 @@ CPPFLAGS += -I$(srctree)/arch/ia64/sn/include obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \ - huberror.o io_init.o iomv.o klconflib.o sn2/ + huberror.o io_init.o iomv.o klconflib.o pio_phys.o \ + sn2/ obj-$(CONFIG_IA64_GENERIC) += machvec.o obj-$(CONFIG_SGI_TIOCX) += tiocx.o obj-$(CONFIG_IA64_SGI_SN_XP) += xp.o diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 3edef0d32f86..dfb3f2902379 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -716,4 +716,3 @@ EXPORT_SYMBOL(sn_pci_unfixup_slot); EXPORT_SYMBOL(sn_pci_controller_fixup); EXPORT_SYMBOL(sn_bus_store_sysdata); EXPORT_SYMBOL(sn_bus_free_sysdata); -EXPORT_SYMBOL(sn_pcidev_info_get); diff --git a/arch/ia64/sn/kernel/pio_phys.S b/arch/ia64/sn/kernel/pio_phys.S new file mode 100644 index 000000000000..3c7d48d6ecb8 --- /dev/null +++ b/arch/ia64/sn/kernel/pio_phys.S @@ -0,0 +1,71 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. + * + * This file contains macros used to access MMR registers via + * uncached physical addresses. + * pio_phys_read_mmr - read an MMR + * pio_phys_write_mmr - write an MMR + * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0 + * Second MMR will be skipped if address is NULL + * + * Addresses passed to these routines should be uncached physical addresses + * ie., 0x80000.... + */ + + + +#include <asm/asmmacro.h> +#include <asm/page.h> + +GLOBAL_ENTRY(pio_phys_read_mmr) + .prologue + .regstk 1,0,0,0 + .body + mov r2=psr + rsm psr.i | psr.dt + ;; + srlz.d + ld8.acq r8=[r32] + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_phys_read_mmr) + +GLOBAL_ENTRY(pio_phys_write_mmr) + .prologue + .regstk 2,0,0,0 + .body + mov r2=psr + rsm psr.i | psr.dt + ;; + srlz.d + st8.rel [r32]=r33 + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_phys_write_mmr) + +GLOBAL_ENTRY(pio_atomic_phys_write_mmrs) + .prologue + .regstk 4,0,0,0 + .body + mov r2=psr + cmp.ne p9,p0=r34,r0; + rsm psr.i | psr.dt | psr.ic + ;; + srlz.d + st8.rel [r32]=r33 +(p9) st8.rel [r34]=r35 + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_atomic_phys_write_mmrs) + + diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 5b84836c2171..8b6d5c844708 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All rights reserved. */ #include <linux/config.h> @@ -498,6 +498,7 @@ void __init sn_setup(char **cmdline_p) * for sn. */ pm_power_off = ia64_sn_power_down; + current->thread.flags |= IA64_THREAD_MIGRATION; } /** @@ -660,7 +661,8 @@ void __init sn_cpu_init(void) SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3}; u64 *pio; pio = is_shub1() ? pio1 : pio2; - pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]); + pda->pio_write_status_addr = + (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, pio[slice]); pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0; } diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 24eefb2fc55f..d9d306c79f2d 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -93,6 +93,27 @@ static inline unsigned long wait_piowc(void) return (ws & SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK) != 0; } +/** + * sn_migrate - SN-specific task migration actions + * @task: Task being migrated to new CPU + * + * SN2 PIO writes from separate CPUs are not guaranteed to arrive in order. + * Context switching user threads which have memory-mapped MMIO may cause + * PIOs to issue from seperate CPUs, thus the PIO writes must be drained + * from the previous CPU's Shub before execution resumes on the new CPU. + */ +void sn_migrate(struct task_struct *task) +{ + pda_t *last_pda = pdacpu(task_thread_info(task)->last_cpu); + volatile unsigned long *adr = last_pda->pio_write_status_addr; + unsigned long val = last_pda->pio_write_status_val; + + /* Drain PIO writes from old CPU's Shub */ + while (unlikely((*adr & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK) + != val)) + cpu_relax(); +} + void sn_tlb_migrate_finish(struct mm_struct *mm) { /* flush_tlb_mm is inefficient if more than 1 users of mm */ @@ -446,7 +467,7 @@ static struct proc_dir_entry *proc_sn2_ptc; static int __init sn2_ptc_init(void) { if (!ia64_platform_is("sn2")) - return -ENOSYS; + return 0; if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) { printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME); diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 8a56f8b5ffa2..99cb28e74295 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -484,7 +484,7 @@ static int __init tiocx_init(void) int found_tiocx_device = 0; if (!ia64_platform_is("sn2")) - return -ENODEV; + return 0; bus_register(&tiocx_bus_type); diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index e52831ed93eb..fa073cc4b565 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -15,6 +15,124 @@ #include <asm/sn/pcidev.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/tioce_provider.h> +#include <asm/sn/sn2/sn_hwperf.h> + +/* + * 1/26/2006 + * + * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe + * (taken from the above PV) before and after accessing tioce internal MMR's + * to avoid tioce lockups. + * + * The recipe as taken from the PV: + * + * if(mmr address < 0x45000) { + * if(mmr address == 0 or 0x80) + * mmr wrt or read address 0xc0 + * else if(mmr address == 0x148 or 0x200) + * mmr wrt or read address 0x28 + * else + * mmr wrt or read address 0x158 + * + * do desired mmr access (rd or wrt) + * + * if(mmr address == 0x100) + * mmr wrt or read address 0x38 + * mmr wrt or read address 0xb050 + * } else + * do desired mmr access + * + * According to hw, we can use reads instead of writes to the above addres + * + * Note this WAR can only to be used for accessing internal MMR's in the + * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the + * "Local CE Registers and Memories" and "PCI Compatible Config Space" address + * spaces from table 2-1 of the "CE Programmer's Reference Overview" document. + * + * All registers defined in struct tioce will meet that criteria. + */ + +static void inline +tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (u64)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + u64 mmr_war_offset; + + if (mmr_offset == 0 || mmr_offset == 0x80) + mmr_war_offset = 0xc0; + else if (mmr_offset == 0x148 || mmr_offset == 0x200) + mmr_war_offset = 0x28; + else + mmr_war_offset = 0x158; + + readq_relaxed((void *)(mmr_base + mmr_war_offset)); + } +} + +static void inline +tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (u64)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + if (mmr_offset == 0x100) + readq_relaxed((void *)(mmr_base + 0x38)); + readq_relaxed((void *)(mmr_base + 0xb050)); + } +} + +/* load mmr contents into a variable */ +#define tioce_mmr_load(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + *(varp) = readq_relaxed(mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store variable contents into mmr */ +#define tioce_mmr_store(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(*varp, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store immediate value into mmr */ +#define tioce_mmr_storei(kern, mmrp, val) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(val, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* set bits (immediate value) into mmr */ +#define tioce_mmr_seti(kern, mmrp, bits) do {\ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp |= (bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) + +/* clear bits (immediate value) into mmr */ +#define tioce_mmr_clri(kern, mmrp, bits) do { \ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp &= ~(bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) /** * Bus address ranges for the 5 flavors of TIOCE DMA @@ -62,9 +180,9 @@ #define TIOCE_ATE_M40 2 #define TIOCE_ATE_M40S 3 -#define KB(x) ((x) << 10) -#define MB(x) ((x) << 20) -#define GB(x) ((x) << 30) +#define KB(x) ((u64)(x) << 10) +#define MB(x) ((u64)(x) << 20) +#define GB(x) ((u64)(x) << 30) /** * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode @@ -151,7 +269,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, int last; int entries; int nates; - int pagesize; + u64 pagesize; u64 *ate_shadow; u64 *ate_reg; u64 addr; @@ -228,7 +346,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, ate = ATE_MAKE(addr, pagesize); ate_shadow[i + j] = ate; - writeq(ate, &ate_reg[i + j]); + tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate); addr += pagesize; } @@ -272,7 +390,8 @@ tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr) u64 tmp; ce_kern->ce_port[port].dirmap_shadow = ct_upper; - writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + ct_upper); tmp = ce_mmr->ce_ure_dir_map[port]; dma_ok = 1; } else @@ -344,7 +463,8 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) if (TIOCE_D32_ADDR(bus_addr)) { if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { ce_kern->ce_port[port].dirmap_shadow = 0; - writeq(0, &ce_mmr->ce_ure_dir_map[port]); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + 0); } } else { struct tioce_dmamap *map; @@ -365,7 +485,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) } else if (--map->refcnt == 0) { for (i = 0; i < map->ate_count; i++) { map->ate_shadow[i] = 0; - map->ate_hw[i] = 0; + tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0); } list_del(&map->ce_dmamap_list); @@ -486,7 +606,7 @@ tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, spin_unlock_irqrestore(&ce_kern->ce_lock, flags); dma_map_done: - if (mapaddr & barrier) + if (mapaddr && barrier) mapaddr = tioce_dma_barrier(mapaddr, 1); return mapaddr; @@ -541,17 +661,61 @@ tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt) soft->ce_pcibus.bs_persist_segment, soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0); + if (ret_stuff.v0) + panic("tioce_error_intr_handler: Fatal TIOCE error"); + return IRQ_HANDLED; } /** + * tioce_reserve_m32 - reserve M32 ate's for the indicated address range + * @tioce_kernel: TIOCE context to reserve ate's for + * @base: starting bus address to reserve + * @limit: last bus address to reserve + * + * If base/limit falls within the range of bus space mapped through the + * M32 space, reserve the resources corresponding to the range. + */ +static void +tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) +{ + int ate_index, last_ate, ps; + struct tioce *ce_mmr; + + if (!TIOCE_M32_ADDR(base)) + return; + + ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; + ps = ce_kern->ce_ate3240_pagesize; + ate_index = ATE_PAGE(base, ps); + last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1; + + if (ate_index < 64) + ate_index = 64; + + while (ate_index <= last_ate) { + u64 ate; + + ate = ATE_MAKE(0xdeadbeef, ps); + ce_kern->ce_ate3240_shadow[ate_index] = ate; + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index], + ate); + ate_index++; + } +} + +/** * tioce_kern_init - init kernel structures related to a given TIOCE * @tioce_common: ptr to a cached tioce_common struct that originated in prom - */ static struct tioce_kernel * + */ +static struct tioce_kernel * tioce_kern_init(struct tioce_common *tioce_common) { int i; + int ps; + int dev; u32 tmp; + unsigned int seg, bus; struct tioce *tioce_mmr; struct tioce_kernel *tioce_kern; @@ -572,9 +736,10 @@ tioce_kern_init(struct tioce_common *tioce_common) * here to use pci_read_config_xxx() so use the raw_pci_ops vector. */ - raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment, - tioce_common->ce_pcibus.bs_persist_busnum, - PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp); + seg = tioce_common->ce_pcibus.bs_persist_segment; + bus = tioce_common->ce_pcibus.bs_persist_busnum; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp); tioce_kern->ce_port1_secondary = (u8) tmp; /* @@ -583,18 +748,76 @@ tioce_kern_init(struct tioce_common *tioce_common) */ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; - __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK); - __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE); - tioce_kern->ce_ate3240_pagesize = KB(256); + tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_PAGESIZE_MASK); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_256K_PAGESIZE); + ps = tioce_kern->ce_ate3240_pagesize = KB(256); for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { tioce_kern->ce_ate40_shadow[i] = 0; - writeq(0, &tioce_mmr->ce_ure_ate40[i]); + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0); } for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { tioce_kern->ce_ate3240_shadow[i] = 0; - writeq(0, &tioce_mmr->ce_ure_ate3240[i]); + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0); + } + + /* + * Reserve ATE's corresponding to reserved address ranges. These + * include: + * + * Memory space covered by each PPB mem base/limit register + * Memory space covered by each PPB prefetch base/limit register + * + * These bus ranges are for pio (downstream) traffic only, and so + * cannot be used for DMA. + */ + + for (dev = 1; dev <= 2; dev++) { + u64 base, limit; + + /* mem base/limit */ + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_BASE, 2, &tmp); + base = (u64)tmp << 16; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_LIMIT, 2, &tmp); + limit = (u64)tmp << 16; + limit |= 0xfffffUL; + + if (base < limit) + tioce_reserve_m32(tioce_kern, base, limit); + + /* + * prefetch mem base/limit. The tioce ppb's have 64-bit + * decoders, so read the upper portions w/o checking the + * attributes. + */ + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_BASE, 2, &tmp); + base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_BASE_UPPER32, 4, &tmp); + base |= (u64)tmp << 32; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_LIMIT, 2, &tmp); + + limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + limit |= 0xfffffUL; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_LIMIT_UPPER32, 4, &tmp); + limit |= (u64)tmp << 32; + + if ((base < limit) && TIOCE_M32_ADDR(base)) + tioce_reserve_m32(tioce_kern, base, limit); } return tioce_kern; @@ -614,6 +837,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) { struct pcidev_info *pcidev_info; struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; struct tioce *ce_mmr; u64 force_int_val; @@ -629,6 +853,29 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; + + /* + * TIOCE Rev A workaround (PV 945826), force an interrupt by writing + * the TIO_INTx register directly (1/26/2006) + */ + if (ce_common->ce_rev == TIOCE_REV_A) { + u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit); + u64 status; + + tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status); + if (status & int_bit_mask) { + u64 force_irq = (1 << 8) | sn_irq_info->irq_irq; + u64 ctalk = sn_irq_info->irq_xtalkaddr; + u64 nasid, offset; + + nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT; + offset = (ctalk & CTALK_NODE_OFFSET); + HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq); + } + + return; + } /* * irq_int_bit is originally set up by prom, and holds the interrupt @@ -666,7 +913,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) default: return; } - writeq(force_int_val, &ce_mmr->ce_adm_force_int); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val); } /** @@ -685,6 +932,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) { struct pcidev_info *pcidev_info; struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; struct tioce *ce_mmr; int bit; u64 vector; @@ -695,14 +943,15 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; bit = sn_irq_info->irq_int_bit; - __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT; vector |= sn_irq_info->irq_xtalkaddr; - writeq(vector, &ce_mmr->ce_adm_int_dest[bit]); - __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector); + tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); tioce_force_interrupt(sn_irq_info); } @@ -721,7 +970,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) static void * tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { + int my_nasid; + cnodeid_t my_cnode, mem_cnode; struct tioce_common *tioce_common; + struct tioce_kernel *tioce_kern; + struct tioce *tioce_mmr; /* * Allocate kernel bus soft and copy from prom. @@ -734,11 +987,23 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common)); tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET; - if (tioce_kern_init(tioce_common) == NULL) { + tioce_kern = tioce_kern_init(tioce_common); + if (tioce_kern == NULL) { kfree(tioce_common); return NULL; } + /* + * Clear out any transient errors before registering the error + * interrupt handler. + */ + + tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias, + ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, ~0ULL); + if (request_irq(SGI_PCIASIC_ERROR, tioce_error_intr_handler, SA_SHIRQ, "TIOCE error", (void *)tioce_common)) @@ -750,6 +1015,21 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont tioce_common->ce_pcibus.bs_persist_segment, tioce_common->ce_pcibus.bs_persist_busnum); + /* + * identify closest nasid for memory allocations + */ + + my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base); + my_cnode = nasid_to_cnodeid(my_nasid); + + if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) { + printk(KERN_WARNING "tioce_bus_fixup: failed to find " + "closest node with MEM to TIO node %d\n", my_cnode); + mem_cnode = (cnodeid_t)-1; /* use any node */ + } + + controller->node = mem_cnode; + return tioce_common; } |
