1 files changed, 201 insertions, 0 deletions
diff --git a/arch/ia64/sn/kernel/huberror.c b/arch/ia64/sn/kernel/huberror.c
new file mode 100644
index 000000000000..2bdf684c5066
--- /dev/null
+++ b/arch/ia64/sn/kernel/huberror.c
@@ -0,0 +1,201 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000,2002-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/delay.h>
+#include <asm/sn/sn_sal.h>
+#include "ioerror.h"
+#include <asm/sn/addrs.h>
+#include <asm/sn/shubio.h>
+#include <asm/sn/geo.h>
+#include "xtalk/xwidgetdev.h"
+#include "xtalk/hubdev.h"
+#include <asm/sn/bte.h>
+
+void hubiio_crb_error_handler(struct hubdev_info *hubdev_info);
+extern void bte_crb_error_handler(cnodeid_t, int, int, ioerror_t *,
+				  int);
+static irqreturn_t hub_eint_handler(int irq, void *arg, struct pt_regs *ep)
+{
+	struct hubdev_info *hubdev_info;
+	struct ia64_sal_retval ret_stuff;
+	nasid_t nasid;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	hubdev_info = (struct hubdev_info *)arg;
+	nasid = hubdev_info->hdi_nasid;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_HUB_ERROR_INTERRUPT,
+			(u64) nasid, 0, 0, 0, 0, 0, 0);
+
+	if ((int)ret_stuff.v0)
+		panic("hubii_eint_handler(): Fatal TIO Error");
+
+	if (!(nasid & 1)) /* Not a TIO, handle CRB errors */
+		(void)hubiio_crb_error_handler(hubdev_info);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Free the hub CRB "crbnum" which encountered an error.
+ * Assumption is, error handling was successfully done,
+ * and we now want to return the CRB back to Hub for normal usage.
+ *
+ * In order to free the CRB, all that's needed is to de-allocate it
+ *
+ * Assumption:
+ *      No other processor is mucking around with the hub control register.
+ *      So, upper layer has to single thread this.
+ */
+void hubiio_crb_free(struct hubdev_info *hubdev_info, int crbnum)
+{
+	ii_icrb0_b_u_t icrbb;
+
+	/*
+	 * The hardware does NOT clear the mark bit, so it must get cleared
+	 * here to be sure the error is not processed twice.
+	 */
+	icrbb.ii_icrb0_b_regval = REMOTE_HUB_L(hubdev_info->hdi_nasid,
+					       IIO_ICRB_B(crbnum));
+	icrbb.b_mark = 0;
+	REMOTE_HUB_S(hubdev_info->hdi_nasid, IIO_ICRB_B(crbnum),
+		     icrbb.ii_icrb0_b_regval);
+	/*
+	 * Deallocate the register wait till hub indicates it's done.
+	 */
+	REMOTE_HUB_S(hubdev_info->hdi_nasid, IIO_ICDR, (IIO_ICDR_PND | crbnum));
+	while (REMOTE_HUB_L(hubdev_info->hdi_nasid, IIO_ICDR) & IIO_ICDR_PND)
+		udelay(1);
+
+}
+
+/*
+ * hubiio_crb_error_handler
+ *
+ *	This routine gets invoked when a hub gets an error 
+ *	interrupt. So, the routine is running in interrupt context
+ *	at error interrupt level.
+ * Action:
+ *	It's responsible for identifying ALL the CRBs that are marked
+ *	with error, and process them. 
+ *	
+ * 	If you find the CRB that's marked with error, map this to the
+ *	reason it caused error, and invoke appropriate error handler.
+ *
+ *	XXX Be aware of the information in the context register.
+ *
+ * NOTE:
+ *	Use REMOTE_HUB_* macro instead of LOCAL_HUB_* so that the interrupt
+ *	handler can be run on any node. (not necessarily the node 
+ *	corresponding to the hub that encountered error).
+ */
+
+void hubiio_crb_error_handler(struct hubdev_info *hubdev_info)
+{
+	nasid_t nasid;
+	ii_icrb0_a_u_t icrba;	/* II CRB Register A */
+	ii_icrb0_b_u_t icrbb;	/* II CRB Register B */
+	ii_icrb0_c_u_t icrbc;	/* II CRB Register C */
+	ii_icrb0_d_u_t icrbd;	/* II CRB Register D */
+	ii_icrb0_e_u_t icrbe;	/* II CRB Register D */
+	int i;
+	int num_errors = 0;	/* Num of errors handled */
+	ioerror_t ioerror;
+
+	nasid = hubdev_info->hdi_nasid;
+
+	/*
+	 * XXX - Add locking for any recovery actions
+	 */
+	/*
+	 * Scan through all CRBs in the Hub, and handle the errors
+	 * in any of the CRBs marked.
+	 */
+	for (i = 0; i < IIO_NUM_CRBS; i++) {
+		/* Check this crb entry to see if it is in error. */
+		icrbb.ii_icrb0_b_regval = REMOTE_HUB_L(nasid, IIO_ICRB_B(i));
+
+		if (icrbb.b_mark == 0) {
+			continue;
+		}
+
+		icrba.ii_icrb0_a_regval = REMOTE_HUB_L(nasid, IIO_ICRB_A(i));
+
+		IOERROR_INIT(&ioerror);
+
+		/* read other CRB error registers. */
+		icrbc.ii_icrb0_c_regval = REMOTE_HUB_L(nasid, IIO_ICRB_C(i));
+		icrbd.ii_icrb0_d_regval = REMOTE_HUB_L(nasid, IIO_ICRB_D(i));
+		icrbe.ii_icrb0_e_regval = REMOTE_HUB_L(nasid, IIO_ICRB_E(i));
+
+		IOERROR_SETVALUE(&ioerror, errortype, icrbb.b_ecode);
+
+		/* Check if this error is due to BTE operation,
+		 * and handle it separately.
+		 */
+		if (icrbd.d_bteop ||
+		    ((icrbb.b_initiator == IIO_ICRB_INIT_BTE0 ||
+		      icrbb.b_initiator == IIO_ICRB_INIT_BTE1) &&
+		     (icrbb.b_imsgtype == IIO_ICRB_IMSGT_BTE ||
+		      icrbb.b_imsgtype == IIO_ICRB_IMSGT_SN1NET))) {
+
+			int bte_num;
+
+			if (icrbd.d_bteop)
+				bte_num = icrbc.c_btenum;
+			else	/* b_initiator bit 2 gives BTE number */
+				bte_num = (icrbb.b_initiator & 0x4) >> 2;
+
+			hubiio_crb_free(hubdev_info, i);
+
+			bte_crb_error_handler(nasid_to_cnodeid(nasid), bte_num,
+					      i, &ioerror, icrbd.d_bteop);
+			num_errors++;
+			continue;
+		}
+	}
+}
+
+/*
+ * Function	: hub_error_init
+ * Purpose	: initialize the error handling requirements for a given hub.
+ * Parameters	: cnode, the compact nodeid.
+ * Assumptions	: Called only once per hub, either by a local cpu. Or by a
+ *			remote cpu, when this hub is headless.(cpuless)
+ * Returns	: None
+ */
+void hub_error_init(struct hubdev_info *hubdev_info)
+{
+	if (request_irq(SGI_II_ERROR, (void *)hub_eint_handler, SA_SHIRQ,
+			"SN_hub_error", (void *)hubdev_info))
+		printk("hub_error_init: Failed to request_irq for 0x%p\n",
+		    hubdev_info);
+	return;
+}
+
+
+/*
+ * Function	: ice_error_init
+ * Purpose	: initialize the error handling requirements for a given tio.
+ * Parameters	: cnode, the compact nodeid.
+ * Assumptions	: Called only once per tio.
+ * Returns	: None
+ */
+void ice_error_init(struct hubdev_info *hubdev_info)
+{
+        if (request_irq
+            (SGI_TIO_ERROR, (void *)hub_eint_handler, SA_SHIRQ, "SN_TIO_error",
+             (void *)hubdev_info))
+                printk("ice_error_init: request_irq() error hubdev_info 0x%p\n",
+                       hubdev_info);
+        return;
+}
+