diff options
Diffstat (limited to 'arch/i386/pci')
| -rw-r--r-- | arch/i386/pci/common.c | 9 | ||||
| -rw-r--r-- | arch/i386/pci/i386.c | 11 | ||||
| -rw-r--r-- | arch/i386/pci/irq.c | 73 | ||||
| -rw-r--r-- | arch/i386/pci/legacy.c | 2 | ||||
| -rw-r--r-- | arch/i386/pci/mmconfig.c | 39 | ||||
| -rw-r--r-- | arch/i386/pci/numa.c | 2 | ||||
| -rw-r--r-- | arch/i386/pci/pcbios.c | 4 | ||||
| -rw-r--r-- | arch/i386/pci/pci.h | 1 |
8 files changed, 113 insertions, 28 deletions
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index 720975e1af50..70bcd53451f6 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -25,7 +25,8 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | int pci_routeirq; int pcibios_last_bus = -1; -struct pci_bus *pci_root_bus = NULL; +unsigned long pirq_table_addr; +struct pci_bus *pci_root_bus; struct pci_raw_ops *raw_pci_ops; static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) @@ -133,7 +134,7 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum) printk("PCI: Probing PCI hardware (bus %02x)\n", busnum); - return pci_scan_bus(busnum, &pci_root_ops, NULL); + return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, NULL); } extern u8 pci_cache_line_size; @@ -164,6 +165,7 @@ static int __init pcibios_init(void) if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) pcibios_sort(); #endif + pci_assign_unassigned_resources(); return 0; } @@ -188,6 +190,9 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "biosirq")) { pci_probe |= PCI_BIOS_IRQ_SCAN; return NULL; + } else if (!strncmp(str, "pirqaddr=", 9)) { + pirq_table_addr = simple_strtoul(str+9, NULL, 0); + return NULL; } #endif #ifdef CONFIG_PCI_DIRECT diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index c205ea7e233b..93a364c82150 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -106,11 +106,16 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) if ((dev = bus->self)) { for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { r = &dev->resource[idx]; - if (!r->start) + if (!r->flags) continue; pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) + if (!r->start || !pr || request_resource(pr, r) < 0) { printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev)); + /* Something is wrong with the region. + Invalidate the resource to prevent child + resource allocations in this range. */ + r->flags = 0; + } } } pcibios_allocate_bus_resources(&bus->children); @@ -227,7 +232,7 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) pci_read_config_word(dev, PCI_COMMAND, &cmd); old_cmd = cmd; - for(idx=0; idx<6; idx++) { + for(idx = 0; idx < PCI_NUM_RESOURCES; idx++) { /* Only set up the requested stuff */ if (!(mask & (1<<idx))) continue; diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index d21b3a2dc978..766b104ac1a1 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -58,6 +58,35 @@ struct irq_router_handler { int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL; /* + * Check passed address for the PCI IRQ Routing Table signature + * and perform checksum verification. + */ + +static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) +{ + struct irq_routing_table *rt; + int i; + u8 sum; + + rt = (struct irq_routing_table *) addr; + if (rt->signature != PIRQ_SIGNATURE || + rt->version != PIRQ_VERSION || + rt->size % 16 || + rt->size < sizeof(struct irq_routing_table)) + return NULL; + sum = 0; + for (i=0; i < rt->size; i++) + sum += addr[i]; + if (!sum) { + DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt); + return rt; + } + return NULL; +} + + + +/* * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table. */ @@ -65,23 +94,17 @@ static struct irq_routing_table * __init pirq_find_routing_table(void) { u8 *addr; struct irq_routing_table *rt; - int i; - u8 sum; + if (pirq_table_addr) { + rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr)); + if (rt) + return rt; + printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); + } for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { - rt = (struct irq_routing_table *) addr; - if (rt->signature != PIRQ_SIGNATURE || - rt->version != PIRQ_VERSION || - rt->size % 16 || - rt->size < sizeof(struct irq_routing_table)) - continue; - sum = 0; - for(i=0; i<rt->size; i++) - sum += addr[i]; - if (!sum) { - DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt); + rt = pirq_check_routing_table(addr); + if (rt) return rt; - } } return NULL; } @@ -227,6 +250,24 @@ static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i } /* + * The VIA pirq rules are nibble-based, like ALI, + * but without the ugly irq number munging. + * However, for 82C586, nibble map is different . + */ +static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + static unsigned int pirqmap[4] = { 3, 2, 5, 1 }; + return read_config_nybble(router, 0x55, pirqmap[pirq-1]); +} + +static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + static unsigned int pirqmap[4] = { 3, 2, 5, 1 }; + write_config_nybble(router, 0x55, pirqmap[pirq-1], irq); + return 1; +} + +/* * ITE 8330G pirq rules are nibble-based * FIXME: pirqmap may be { 1, 0, 3, 2 }, * 2+3 are both mapped to irq 9 on my system @@ -512,6 +553,10 @@ static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, switch(device) { case PCI_DEVICE_ID_VIA_82C586_0: + r->name = "VIA"; + r->get = pirq_via586_get; + r->set = pirq_via586_set; + return 1; case PCI_DEVICE_ID_VIA_82C596: case PCI_DEVICE_ID_VIA_82C686: case PCI_DEVICE_ID_VIA_8231: diff --git a/arch/i386/pci/legacy.c b/arch/i386/pci/legacy.c index 1492e3753869..149a9588c256 100644 --- a/arch/i386/pci/legacy.c +++ b/arch/i386/pci/legacy.c @@ -45,6 +45,8 @@ static int __init pci_legacy_init(void) printk("PCI: Probing PCI hardware\n"); pci_root_bus = pcibios_scan_root(0); + if (pci_root_bus) + pci_bus_add_devices(pci_root_bus); pcibios_fixup_peer_bridges(); diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 021a50aa51f4..60f0e7a1162a 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -11,11 +11,9 @@ #include <linux/pci.h> #include <linux/init.h> +#include <linux/acpi.h> #include "pci.h" -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -u32 pci_mmcfg_base_addr; - #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG)) /* The base address of the last MMCONFIG device accessed */ @@ -24,10 +22,31 @@ static u32 mmcfg_last_accessed_device; /* * Functions for accessing PCI configuration space with MMCONFIG accesses */ +static u32 get_base_addr(unsigned int seg, int bus) +{ + int cfg_num = -1; + struct acpi_table_mcfg_config *cfg; + + while (1) { + ++cfg_num; + if (cfg_num >= pci_mmcfg_config_num) { + /* something bad is going on, no cfg table is found. */ + /* so we fall back to the old way we used to do this */ + /* and just rely on the first entry to be correct. */ + return pci_mmcfg_config[0].base_address; + } + cfg = &pci_mmcfg_config[cfg_num]; + if (cfg->pci_segment_group_number != seg) + continue; + if ((cfg->start_bus_number <= bus) && + (cfg->end_bus_number >= bus)) + return cfg->base_address; + } +} -static inline void pci_exp_set_dev_base(int bus, int devfn) +static inline void pci_exp_set_dev_base(unsigned int seg, int bus, int devfn) { - u32 dev_base = pci_mmcfg_base_addr | (bus << 20) | (devfn << 12); + u32 dev_base = get_base_addr(seg, bus) | (bus << 20) | (devfn << 12); if (dev_base != mmcfg_last_accessed_device) { mmcfg_last_accessed_device = dev_base; set_fixmap_nocache(FIX_PCIE_MCFG, dev_base); @@ -44,7 +63,7 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus, spin_lock_irqsave(&pci_config_lock, flags); - pci_exp_set_dev_base(bus, devfn); + pci_exp_set_dev_base(seg, bus, devfn); switch (len) { case 1: @@ -73,7 +92,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus, spin_lock_irqsave(&pci_config_lock, flags); - pci_exp_set_dev_base(bus, devfn); + pci_exp_set_dev_base(seg, bus, devfn); switch (len) { case 1: @@ -101,7 +120,11 @@ static int __init pci_mmcfg_init(void) { if ((pci_probe & PCI_PROBE_MMCONF) == 0) goto out; - if (!pci_mmcfg_base_addr) + + acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg); + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].base_address == 0)) goto out; /* Kludge for now. Don't use mmconfig on AMD systems because diff --git a/arch/i386/pci/numa.c b/arch/i386/pci/numa.c index 9e3695461899..adbe17a38f6f 100644 --- a/arch/i386/pci/numa.c +++ b/arch/i386/pci/numa.c @@ -115,6 +115,8 @@ static int __init pci_numa_init(void) return 0; pci_root_bus = pcibios_scan_root(0); + if (pci_root_bus) + pci_bus_add_devices(pci_root_bus); if (num_online_nodes() > 1) for_each_online_node(quad) { if (quad == 0) diff --git a/arch/i386/pci/pcbios.c b/arch/i386/pci/pcbios.c index 141421b673b0..b9d65f0bc2d1 100644 --- a/arch/i386/pci/pcbios.c +++ b/arch/i386/pci/pcbios.c @@ -4,6 +4,7 @@ #include <linux/pci.h> #include <linux/init.h> +#include <linux/module.h> #include "pci.h" #include "pci-functions.h" @@ -456,7 +457,7 @@ struct irq_routing_table * __devinit pcibios_get_irq_routing_table(void) free_page(page); return rt; } - +EXPORT_SYMBOL(pcibios_get_irq_routing_table); int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq) { @@ -473,6 +474,7 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq) "S" (&pci_indirect)); return !(ret & 0xff00); } +EXPORT_SYMBOL(pcibios_set_irq_routing); static int __init pci_pcbios_init(void) { diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index a8fc80ca69f3..a80f0f55ff51 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -27,6 +27,7 @@ #define PCI_ASSIGN_ALL_BUSSES 0x4000 extern unsigned int pci_probe; +extern unsigned long pirq_table_addr; /* pci-i386.c */ |
