diff options
Diffstat (limited to 'arch/cris')
| -rw-r--r-- | arch/cris/Kconfig | 4 | ||||
| -rw-r--r-- | arch/cris/arch-v10/Kconfig | 12 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/Kconfig | 1 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/entry.S | 2 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/kgdb.c | 6 | ||||
| -rw-r--r-- | arch/cris/arch-v32/drivers/Kconfig | 1 | ||||
| -rw-r--r-- | arch/cris/arch-v32/kernel/entry.S | 2 | ||||
| -rw-r--r-- | arch/cris/arch-v32/kernel/kgdb.c | 14 | ||||
| -rw-r--r-- | arch/cris/arch-v32/lib/nand_init.S | 178 | ||||
| -rw-r--r-- | arch/cris/include/asm/serial.h | 9 |
10 files changed, 31 insertions, 198 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 17addacb169e..408b055c585f 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -282,8 +282,8 @@ config ETRAX_RTC Enables drivers for the Real-Time Clock battery-backed chips on some products. The kernel reads the time when booting, and the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a - rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc - device. You can check the time with cat /proc/rtc, but + rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the + /dev/rtc device. You can check the time with cat /proc/rtc, but normal time reading should be done using libc function time and friends. diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index adc164e99339..df9a38b4f18f 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -24,8 +24,8 @@ config ETRAX_PA_LEDS help The ETRAX network driver is responsible for flashing LED's when packets arrive and are sent. It uses macros defined in - <file:include/asm-cris/io.h>, and those macros are defined after what - YOU choose in this option. The actual bits used are configured + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured separately. Select this if the LEDs are on port PA. Some products put the leds on PB or a memory-mapped latch (CSP0) instead. @@ -34,8 +34,8 @@ config ETRAX_PB_LEDS help The ETRAX network driver is responsible for flashing LED's when packets arrive and are sent. It uses macros defined in - <file:include/asm-cris/io.h>, and those macros are defined after what - YOU choose in this option. The actual bits used are configured + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured separately. Select this if the LEDs are on port PB. Some products put the leds on PA or a memory-mapped latch (CSP0) instead. @@ -44,8 +44,8 @@ config ETRAX_CSP0_LEDS help The ETRAX network driver is responsible for flashing LED's when packets arrive and are sent. It uses macros defined in - <file:include/asm-cris/io.h>, and those macros are defined after what - YOU choose in this option. The actual bits used are configured + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured separately. Select this if the LEDs are on a memory-mapped latch using chip select CSP0, this is mapped at 0x90000000. Some products put the leds on PA or PB instead. diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 0d7221779923..32d90867a984 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -4,6 +4,7 @@ config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V10 select NET_ETHERNET + select NET_CORE select MII help This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 1161883eb582..592fbe9dfb62 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -771,7 +771,7 @@ sys_call_table: .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index b9f9c8ce2169..b579dd02e098 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -694,7 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count) /* Valid mem address. */ for (i = 0; i < count; i++) { ch = *mem++; - buf = pack_hex_byte(buf, ch); + buf = hex_byte_pack(buf, ch); } } @@ -868,7 +868,7 @@ stub_is_stopped(int sigval) /* Send trap type (converted to signal) */ *ptr++ = 'T'; - ptr = pack_hex_byte(ptr, sigval); + ptr = hex_byte_pack(ptr, sigval); /* Send register contents. We probably only need to send the * PC, frame pointer and stack pointer here. Other registers will be @@ -881,7 +881,7 @@ stub_is_stopped(int sigval) status = read_register (regno, ®_cont); if (status == SUCCESS) { - ptr = pack_hex_byte(ptr, regno); + ptr = hex_byte_pack(ptr, regno); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 41a2732e8b9c..e47e9c3401b0 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -4,6 +4,7 @@ config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V32 select NET_ETHERNET + select NET_CORE select MII help This option enables the ETRAX FS built-in 10/100Mbit Ethernet diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 84fed7e91ada..c3ea4694fbaf 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -714,7 +714,7 @@ sys_call_table: .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* Old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c index c0343c3ea7f8..8c1d35cdf00a 100644 --- a/arch/cris/arch-v32/kernel/kgdb.c +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -677,7 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count) /* Valid mem address. */ for (i = 0; i < count; i++) { ch = *mem++; - buf = pack_hex_byte(buf, ch); + buf = hex_byte_pack(buf, ch); } } /* Terminate properly. */ @@ -695,7 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count) mem += count - 1; for (i = 0; i < count; i++) { ch = *mem--; - buf = pack_hex_byte(buf, ch); + buf = hex_byte_pack(buf, ch); } /* Terminate properly. */ @@ -880,7 +880,7 @@ stub_is_stopped(int sigval) /* Send trap type (converted to signal) */ *ptr++ = 'T'; - ptr = pack_hex_byte(ptr, sigval); + ptr = hex_byte_pack(ptr, sigval); if (((reg.exs & 0xff00) >> 8) == 0xc) { @@ -988,26 +988,26 @@ stub_is_stopped(int sigval) } /* Only send PC, frame and stack pointer. */ read_register(PC, ®_cont); - ptr = pack_hex_byte(ptr, PC); + ptr = hex_byte_pack(ptr, PC); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[PC]); *ptr++ = ';'; read_register(R8, ®_cont); - ptr = pack_hex_byte(ptr, R8); + ptr = hex_byte_pack(ptr, R8); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[R8]); *ptr++ = ';'; read_register(SP, ®_cont); - ptr = pack_hex_byte(ptr, SP); + ptr = hex_byte_pack(ptr, SP); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[SP]); *ptr++ = ';'; /* Send ERP as well; this will save us an entire register fetch in some cases. */ read_register(ERP, ®_cont); - ptr = pack_hex_byte(ptr, ERP); + ptr = hex_byte_pack(ptr, ERP); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[ERP]); *ptr++ = ';'; diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S deleted file mode 100644 index d671fed451c9..000000000000 --- a/arch/cris/arch-v32/lib/nand_init.S +++ /dev/null @@ -1,178 +0,0 @@ -##============================================================================= -## -## nand_init.S -## -## The bootrom copies data from the NAND flash to the internal RAM but -## due to a bug/feature we can only trust the 256 first bytes. So this -## code copies more data from NAND flash to internal RAM. Obvioulsy this -## code must fit in the first 256 bytes so alter with care. -## -## Some notes about the bug/feature for future reference: -## The bootrom copies the first 127 KB from NAND flash to internal -## memory. The problem is that it does a bytewise copy. NAND flashes -## does autoincrement on the address so for a 16-bite device each -## read/write increases the address by two. So the copy loop in the -## bootrom will discard every second byte. This is solved by inserting -## zeroes in every second byte in the first erase block. -## -## The bootrom also incorrectly assumes that it can read the flash -## linear with only one read command but the flash will actually -## switch between normal area and spare area if you do that so we -## can't trust more than the first 256 bytes. -## -##============================================================================= - -#include <arch/hwregs/asm/reg_map_asm.h> -#include <arch/hwregs/asm/gio_defs_asm.h> -#include <arch/hwregs/asm/pinmux_defs_asm.h> -#include <arch/hwregs/asm/bif_core_defs_asm.h> -#include <arch/hwregs/asm/config_defs_asm.h> - -;; There are 8-bit NAND flashes and 16-bit NAND flashes. -;; We need to treat them slightly different. -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 -#define PAGE_SIZE 256 -#else -#error 2 -#define PAGE_SIZE 512 -#endif -#define ERASE_BLOCK 16384 - -;; GPIO pins connected to NAND flash -#define CE 4 -#define CLE 5 -#define ALE 6 -#define BY 7 - -;; Address space for NAND flash -#define NAND_RD_ADDR 0x90000000 -#define NAND_WR_ADDR 0x94000000 - -#define READ_CMD 0x00 - -;; Readability macros -#define CSP_MASK \ - REG_MASK(bif_core, rw_grp3_cfg, gated_csp0) | \ - REG_MASK(bif_core, rw_grp3_cfg, gated_csp1) -#define CSP_VAL \ - REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \ - REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr) - -;;---------------------------------------------------------------------------- -;; Macros to set/clear GPIO bits - -.macro SET x - or.b (1<<\x),$r9 - move.d $r9, [$r2] -.endm - -.macro CLR x - and.b ~(1<<\x),$r9 - move.d $r9, [$r2] -.endm - -;;---------------------------------------------------------------------------- - -nand_boot: - ;; Check if nand boot was selected - move.d REG_ADDR(config, regi_config, r_bootsel), $r0 - move.d [$r0], $r0 - and.d REG_MASK(config, r_bootsel, boot_mode), $r0 - cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 - bne normal_boot ; No NAND boot - nop - -copy_nand_to_ram: - ;; copy_nand_to_ram - ;; Arguments - ;; r10 - destination - ;; r11 - source offset - ;; r12 - size - ;; r13 - Address to jump to after completion - ;; Note : r10-r12 are clobbered on return - ;; Registers used: - ;; r0 - NAND_RD_ADDR - ;; r1 - NAND_WR_ADDR - ;; r2 - reg_gio_rw_pa_dout - ;; r3 - reg_gio_r_pa_din - ;; r4 - tmp - ;; r5 - byte counter within a page - ;; r6 - reg_pinmux_rw_pa - ;; r7 - reg_gio_rw_pa_oe - ;; r8 - reg_bif_core_rw_grp3_cfg - ;; r9 - reg_gio_rw_pa_dout shadow - move.d 0x90000000, $r0 - move.d 0x94000000, $r1 - move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2 - move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3 - move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6 - move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7 - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8 - -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 - lsrq 1, $r11 -#endif - ;; Set up GPIO - move.d [$r2], $r9 - move.d [$r7], $r4 - or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4 - move.d $r4, [$r7] - - ;; Set up bif - move.d [$r8], $r4 - and.d CSP_MASK, $r4 - or.d CSP_VAL, $r4 - move.d $r4, [$r8] - -1: ;; Copy one page - CLR CE - SET CLE - moveq READ_CMD, $r4 - move.b $r4, [$r1] - moveq 20, $r4 -2: bne 2b - subq 1, $r4 - CLR CLE - SET ALE - clear.w [$r1] ; Column address = 0 - move.d $r11, $r4 - lsrq 8, $r4 - move.b $r4, [$r1] ; Row address - lsrq 8, $r4 - move.b $r4, [$r1] ; Row address - moveq 20, $r4 -2: bne 2b - subq 1, $r4 - CLR ALE -2: move.d [$r3], $r4 - and.d 1 << BY, $r4 - beq 2b - movu.w PAGE_SIZE, $r5 -2: ; Copy one byte/word -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 - move.w [$r0], $r4 -#else - move.b [$r0], $r4 -#endif - subq 1, $r5 - bne 2b -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 - move.w $r4, [$r10+] - subu.w PAGE_SIZE*2, $r12 -#else - move.b $r4, [$r10+] - subu.w PAGE_SIZE, $r12 -#endif - bpl 1b - addu.w PAGE_SIZE, $r11 - - ;; End of copy - jump $r13 - nop - - ;; This will warn if the code above is too large. If you consider - ;; to remove this you don't understand the bug/feature. - .org 256 - .org ERASE_BLOCK - -normal_boot: diff --git a/arch/cris/include/asm/serial.h b/arch/cris/include/asm/serial.h new file mode 100644 index 000000000000..af7535a955fb --- /dev/null +++ b/arch/cris/include/asm/serial.h @@ -0,0 +1,9 @@ +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + */ +#define BASE_BAUD (1843200 / 16) + +#endif /* _ASM_SERIAL_H */ |
