diff options
Diffstat (limited to 'arch/blackfin/mach-bf548/include/mach/defBF547.h')
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/defBF547.h | 1244 |
1 files changed, 1244 insertions, 0 deletions
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h new file mode 100644 index 000000000000..661f0d877bd1 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -0,0 +1,1244 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF547.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF548_H +#define _DEF_BF548_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ + +/* Timer Registers */ + +#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ +#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ +#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ +#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ +#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ +#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ +#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ +#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ +#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ +#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ +#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ +#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ + +/* Timer Group of 3 Registers */ + +#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ +#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ +#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ + +/* SPORT0 Registers */ + +#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ +#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ +#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ +#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ +#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ +#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ +#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ +#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ + +/* EPPI0 Registers */ + +#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ +#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ +#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ +#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ +#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ +#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ +#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ +#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ +#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ + +/* UART2 Registers */ + +#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ +#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ +#define UART2_GCTL 0xffc02108 /* Global Control Register */ +#define UART2_LCR 0xffc0210c /* Line Control Register */ +#define UART2_MCR 0xffc02110 /* Modem Control Register */ +#define UART2_LSR 0xffc02114 /* Line Status Register */ +#define UART2_MSR 0xffc02118 /* Modem Status Register */ +#define UART2_SCR 0xffc0211c /* Scratch Register */ +#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ +#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ +#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ + +/* Two Wire Interface Registers (TWI1) */ + +#define TWI1_REGBASE 0xffc02200 +#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ +#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ +#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ +#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ +#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ +#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ +#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ +#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ + +/* SPI2 Registers */ + +#define SPI2_REGBASE 0xffc02400 +#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ +#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ +#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ +#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ +#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ +#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ +#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ + +/* ATAPI Registers */ + +#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ +#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ +#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ +#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ +#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ +#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ +#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ +#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ +#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ +#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ +#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ +#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ +#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ +#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ +#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ +#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ +#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ +#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ +#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ +#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ +#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ +#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ +#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ +#define SDH_COMMAND 0xffc0390c /* SDH Command */ +#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ +#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ +#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ +#define SDH_STATUS 0xffc03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ +#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ +#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ +#define SDH_CFG 0xffc039c8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ +#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ +#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03c00 /* Function address register */ +#define USB_POWER 0xffc03c04 /* Power management register */ +#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03c20 /* USB frame number */ +#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ +#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ +#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ +#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ +#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ +#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ +#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ +#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ +#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ +#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Keypad Registers */ + +#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ +#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ +#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ +#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ +#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ +#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ + +/* Pixel Compositor (PIXC) Registers */ + +#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ +#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ +#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ +#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ +#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ +#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ +#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ +#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ +#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ +#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ +#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ +#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ +#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ +#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ +#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ +#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ +#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ +#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ +#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ + +/* Handshake MDMA 0 Registers */ + +#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ + +/* Handshake MDMA 1 Registers */ + +#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for PIXC_CTL */ + +#define PIXC_EN 0x1 /* Pixel Compositor Enable */ +#define OVR_A_EN 0x2 /* Overlay A Enable */ +#define OVR_B_EN 0x4 /* Overlay B Enable */ +#define IMG_FORM 0x8 /* Image Data Format */ +#define OVR_FORM 0x10 /* Overlay Data Format */ +#define OUT_FORM 0x20 /* Output Data Format */ +#define UDS_MOD 0x40 /* Resampling Mode */ +#define TC_EN 0x80 /* Transparent Color Enable */ +#define IMG_STAT 0x300 /* Image FIFO Status */ +#define OVR_STAT 0xc00 /* Overlay FIFO Status */ +#define WM_LVL 0x3000 /* FIFO Watermark Level */ + +/* Bit masks for PIXC_AHSTART */ + +#define A_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_AHEND */ + +#define A_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_AVSTART */ + +#define A_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_AVEND */ + +#define A_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_ATRANSP */ + +#define A_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_BHSTART */ + +#define B_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_BHEND */ + +#define B_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_BVSTART */ + +#define B_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_BVEND */ + +#define B_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_BTRANSP */ + +#define B_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_INTRSTAT */ + +#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ +#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ +#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ +#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ + +/* Bit masks for PIXC_RYCON */ + +#define A11 0x3ff /* A11 in the Coefficient Matrix */ +#define A12 0xffc00 /* A12 in the Coefficient Matrix */ +#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ +#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_GUCON */ + +#define A21 0x3ff /* A21 in the Coefficient Matrix */ +#define A22 0xffc00 /* A22 in the Coefficient Matrix */ +#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ +#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_BVCON */ + +#define A31 0x3ff /* A31 in the Coefficient Matrix */ +#define A32 0xffc00 /* A32 in the Coefficient Matrix */ +#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ +#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_CCBIAS */ + +#define A14 0x3ff /* A14 in the Bias Vector */ +#define A24 0xffc00 /* A24 in the Bias Vector */ +#define A34 0x3ff00000 /* A34 in the Bias Vector */ + +/* Bit masks for PIXC_TC */ + +#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ +#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ +#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_EN 0x1 /* Host Enable */ +#define HOST_END 0x2 /* Host Endianess */ +#define DATA_SIZE 0x4 /* Data Size */ +#define HOST_RST 0x8 /* Host Reset */ +#define HRDY_OVR 0x20 /* Host Ready Override */ +#define INT_MODE 0x40 /* Interrupt Mode */ +#define BT_EN 0x80 /* Bus Timeout Enable */ +#define EHW 0x100 /* Enable Host Write */ +#define EHR 0x200 /* Enable Host Read */ +#define BDR 0x400 /* Burst DMA Requests */ + +/* Bit masks for HOST_STATUS */ + +#define DMA_READY 0x1 /* DMA Ready */ +#define FIFOFULL 0x2 /* FIFO Full */ +#define FIFOEMPTY 0x4 /* FIFO Empty */ +#define DMA_COMPLETE 0x8 /* DMA Complete */ +#define HSHK 0x10 /* Host Handshake */ +#define HSTIMEOUT 0x20 /* Host Timeout */ +#define HIRQ 0x40 /* Host Interrupt Request */ +#define ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define DMA_DIR 0x100 /* DMA Direction */ +#define BTE 0x200 /* Bus Timeout Enabled */ + +/* Bit masks for HOST_TIMEOUT */ + +#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for KPAD_CTL */ + +#define KPAD_EN 0x1 /* Keypad Enable */ +#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ +#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ +#define KPAD_COLEN 0xe000 /* Column Enable Width */ + +/* Bit masks for KPAD_PRESCALE */ + +#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ + +/* Bit masks for KPAD_MSEL */ + +#define DBON_SCALE 0xff /* Debounce Scale Value */ +#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ + +/* Bit masks for KPAD_ROWCOL */ + +#define KPAD_ROW 0xff /* Rows Pressed */ +#define KPAD_COL 0xff00 /* Columns Pressed */ + +/* Bit masks for KPAD_STAT */ + +#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ +#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ +#define KPAD_PRESSED 0x8 /* Key press current status */ + +/* Bit masks for KPAD_SOFTEVAL */ + +#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ + +/* Bit masks for SDH_COMMAND */ + +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP 0x40 /* Response */ +#define CMD_L_RSP 0x80 /* Long Response */ +#define CMD_INT_E 0x100 /* Command Interrupt */ +#define CMD_PEND_E 0x200 /* Command Pending */ +#define CMD_E 0x400 /* Command Enable */ + +/* Bit masks for SDH_PWR_CTL */ + +#define PWR_ON 0x3 /* Power On */ +#if 0 +#define TBD 0x3c /* TBD */ +#endif +#define SD_CMD_OD 0x40 /* Open Drain Output */ +#define ROD_CTL 0x80 /* Rod Control */ + +/* Bit masks for SDH_CLK_CTL */ + +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ +#define PWR_SV_E 0x200 /* Power Save Enable */ +#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ +#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ + +/* Bit masks for SDH_RESP_CMD */ + +#define RESP_CMD 0x3f /* Response Command */ + +/* Bit masks for SDH_DATA_CTL */ + +#define DTX_E 0x1 /* Data Transfer Enable */ +#define DTX_DIR 0x2 /* Data Transfer Direction */ +#define DTX_MODE 0x4 /* Data Transfer Mode */ +#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ + +/* Bit masks for SDH_STATUS */ + +#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ +#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ +#define TX_UNDERRUN 0x10 /* Transmit Underrun */ +#define RX_OVERRUN 0x20 /* Receive Overrun */ +#define CMD_RESP_END 0x40 /* CMD Response End */ +#define CMD_SENT 0x80 /* CMD Sent */ +#define DAT_END 0x100 /* Data End */ +#define START_BIT_ERR 0x200 /* Start Bit Error */ +#define DAT_BLK_END 0x400 /* Data Block End */ +#define CMD_ACT 0x800 /* CMD Active */ +#define TX_ACT 0x1000 /* Transmit Active */ +#define RX_ACT 0x2000 /* Receive Active */ +#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ +#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ +#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ +#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ +#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ +#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ +#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ +#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ + +/* Bit masks for SDH_STATUS_CLR */ + +#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ +#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ +#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ +#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ +#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ +#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ +#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ +#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ +#define DAT_END_STAT 0x100 /* Data End Status */ +#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ +#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ + +/* Bit masks for SDH_MASK0 */ + +#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ +#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ +#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ +#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ +#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ +#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ +#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ +#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ +#define DAT_END_MASK 0x100 /* Data End Mask */ +#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ +#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ +#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ +#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ +#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ +#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ +#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ +#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ +#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ +#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ +#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ +#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ +#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ + +/* Bit masks for SDH_FIFO_CNT */ + +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* Bit masks for SDH_E_STATUS */ + +#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ +#define SD_CARD_DET 0x10 /* SD Card Detect */ + +/* Bit masks for SDH_E_MASK */ + +#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ +#define SCD_MSK 0x40 /* Mask Card Detect */ + +/* Bit masks for SDH_CFG */ + +#define CLKS_EN 0x1 /* Clocks Enable */ +#define SD4E 0x4 /* SDIO 4-Bit Enable */ +#define MWE 0x8 /* Moving Window Enable */ +#define SD_RST 0x10 /* SDMMC Reset */ +#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ +#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ + +/* Bit masks for SDH_RD_WAIT_EN */ + +#define RWR 0x1 /* Read Wait Request */ + +/* Bit masks for ATAPI_CONTROL */ + +#define PIO_START 0x1 /* Start PIO/Reg Op */ +#define MULTI_START 0x2 /* Start Multi-DMA Op */ +#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ +#define XFER_DIR 0x8 /* Transfer Direction */ +#define IORDY_EN 0x10 /* IORDY Enable */ +#define FIFO_FLUSH 0x20 /* Flush FIFOs */ +#define SOFT_RST 0x40 /* Soft Reset */ +#define DEV_RST 0x80 /* Device Reset */ +#define TFRCNT_RST 0x100 /* Trans Count Reset */ +#define END_ON_TERM 0x200 /* End/Terminate Select */ +#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ +#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ + +/* Bit masks for ATAPI_STATUS */ + +#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ +#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ +#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ +#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ + +/* Bit masks for ATAPI_DEV_ADDR */ + +#define DEV_ADDR 0x1f /* Device Address */ + +/* Bit masks for ATAPI_INT_MASK */ + +#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ +#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ +#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ +#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ +#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ +#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ +#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ +#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ +#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ + +/* Bit masks for ATAPI_INT_STATUS */ + +#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ +#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ +#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ +#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ +#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ +#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ +#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ +#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ +#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ + +/* Bit masks for ATAPI_LINE_STATUS */ + +#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ +#define ATAPI_DASP 0x2 /* Device dasp to host line status */ +#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ +#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ +#define ATAPI_ADDR 0x70 /* ATAPI address line status */ +#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ +#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ +#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ +#define ATAPI_DIORN 0x400 /* ATAPI read line status */ +#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_SM_STATE */ + +#define PIO_CSTATE 0xf /* PIO mode state machine current state */ +#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ +#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ +#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_TERMINATE */ + +#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ + +/* Bit masks for ATAPI_REG_TIM_0 */ + +#define T2_REG 0xff /* End of cycle time for register access transfers */ +#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ + +/* Bit masks for ATAPI_PIO_TIM_0 */ + +#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ +#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ +#define T4_REG 0xf000 /* DIOW data hold */ + +/* Bit masks for ATAPI_PIO_TIM_1 */ + +#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ + +/* Bit masks for ATAPI_MULTI_TIM_0 */ + +#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ +#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ + +/* Bit masks for ATAPI_MULTI_TIM_1 */ + +#define TKW 0xff /* Selects DIOW negated pulsewidth */ +#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ + +/* Bit masks for ATAPI_MULTI_TIM_2 */ + +#define TH 0xff /* Selects DIOW data hold */ +#define TEOC 0xff00 /* Selects end of cycle for DMA */ + +/* Bit masks for ATAPI_ULTRA_TIM_0 */ + +#define TACK 0xff /* Selects setup and hold times for TACK */ +#define TENV 0xff00 /* Selects envelope time */ + +/* Bit masks for ATAPI_ULTRA_TIM_1 */ + +#define TDVS 0xff /* Selects data valid setup time */ +#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ + +/* Bit masks for ATAPI_ULTRA_TIM_2 */ + +#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ +#define TMLI 0xff00 /* Selects interlock time */ + +/* Bit masks for ATAPI_ULTRA_TIM_3 */ + +#define TZAH 0xff /* Selects minimum delay required for output */ +#define READY_PAUSE 0xff00 /* Selects ready to pause */ + +/* Bit masks for TIMER_ENABLE1 */ + +#define TIMEN8 0x1 /* Timer 8 Enable */ +#define TIMEN9 0x2 /* Timer 9 Enable */ +#define TIMEN10 0x4 /* Timer 10 Enable */ + +/* Bit masks for TIMER_DISABLE1 */ + +#define TIMDIS8 0x1 /* Timer 8 Disable */ +#define TIMDIS9 0x2 /* Timer 9 Disable */ +#define TIMDIS10 0x4 /* Timer 10 Disable */ + +/* Bit masks for TIMER_STATUS1 */ + +#define TIMIL8 0x1 /* Timer 8 Interrupt */ +#define TIMIL9 0x2 /* Timer 9 Interrupt */ +#define TIMIL10 0x4 /* Timer 10 Interrupt */ +#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ +#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ +#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ +#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ +#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ +#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ + +/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define RESUME_MODE 0x4 /* DMA Mode */ +#define RESET 0x8 /* Reset indicator */ +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define SOFT_CONN 0x40 /* Soft connect */ +#define ISO_UPDATE 0x80 /* Isochronous update */ + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define RESUME_B 0x2 /* Resume indicator */ +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define SOF_B 0x8 /* Start of frame */ +#define CONN_B 0x10 /* Connection indicator */ +#define DISCON_B 0x20 /* Disconnect indicator */ +#define SESSION_REQ_B 0x40 /* Session Request */ +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define SOF_BE 0x8 /* Start of frame int enable */ +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define HOST_REQ 0x2 /* Host negotiation request */ +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define LSDEV 0x20 /* Low-speed indicator */ +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define DATAEND 0x8 /* Data end indicator */ +#define SETUPEND 0x10 /* Setup end */ +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_TH 0x4 /* error condition host mode */ +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define MODE 0x4 /* DMA Bus error */ +#define INT_ENA 0x8 /* Interrupt enable */ +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for HMDMAx_CONTROL */ + +#define HMDMAEN 0x1 /* Handshake MDMA Enable */ +#define REP 0x2 /* Handshake MDMA Request Polarity */ +#define UTE 0x8 /* Urgency Threshold Enable */ +#define OIE 0x10 /* Overflow Interrupt Enable */ +#define BDIE 0x20 /* Block Done Interrupt Enable */ +#define MBDI 0x40 /* Mask Block Done Interrupt */ +#define DRQ 0x300 /* Handshake MDMA Request Type */ +#define RBC 0x1000 /* Force Reload of BCOUNT */ +#define PS 0x2000 /* Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + + +#endif /* _DEF_BF548_H */ |
