diff options
Diffstat (limited to 'arch/blackfin/mach-bf527/include/mach/defBF527.h')
| -rw-r--r-- | arch/blackfin/mach-bf527/include/mach/defBF527.h | 1090 |
1 files changed, 1090 insertions, 0 deletions
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h new file mode 100644 index 000000000000..f040f364afa3 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h @@ -0,0 +1,1090 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF527.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF527_H +#define _DEF_BF527_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "defBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ + +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ + +/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ + +/* EMAC_OPMODE Masks */ + +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ + +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ + +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ + +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ + +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ + +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ + +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ + +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ + +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ + +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ + +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ + +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ + +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ + +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03800 /* Function address register */ +#define USB_POWER 0xffc03804 /* Power management register */ +#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03820 /* USB frame number */ +#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ + +#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ + +#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ +#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ +#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ +#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ +#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ +#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ +#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ +#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ + +#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +#endif /* _DEF_BF527_H */ |
