diff options
Diffstat (limited to 'arch/blackfin/include/asm')
25 files changed, 1284 insertions, 196 deletions
diff --git a/arch/blackfin/include/asm/bfin-lq035q1.h b/arch/blackfin/include/asm/bfin-lq035q1.h index 57bc21ac2296..836895156b5b 100644 --- a/arch/blackfin/include/asm/bfin-lq035q1.h +++ b/arch/blackfin/include/asm/bfin-lq035q1.h @@ -8,6 +8,9 @@ #ifndef BFIN_LQ035Q1_H #define BFIN_LQ035Q1_H +/* + * LCD Modes + */ #define LQ035_RL (0 << 8) /* Right -> Left Scan */ #define LQ035_LR (1 << 8) /* Left -> Right Scan */ #define LQ035_TB (1 << 9) /* Top -> Botton Scan */ @@ -17,9 +20,18 @@ #define LQ035_NORM (1 << 13) /* Reversal */ #define LQ035_REV (0 << 13) /* Reversal */ +/* + * PPI Modes + */ + +#define USE_RGB565_16_BIT_PPI 1 +#define USE_RGB565_8_BIT_PPI 2 +#define USE_RGB888_8_BIT_PPI 3 + struct bfin_lq035q1fb_disp_info { unsigned mode; + unsigned ppi_mode; /* GPIOs */ int use_bl; unsigned gpio_bl; diff --git a/arch/blackfin/include/asm/bfin_can.h b/arch/blackfin/include/asm/bfin_can.h new file mode 100644 index 000000000000..eec0076a385b --- /dev/null +++ b/arch/blackfin/include/asm/bfin_can.h @@ -0,0 +1,725 @@ +/* + * bfin_can.h - interface to Blackfin CANs + * + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_BFIN_CAN_H__ +#define __ASM_BFIN_CAN_H__ + +/* + * transmit and receive channels + */ +#define TRANSMIT_CHL 24 +#define RECEIVE_STD_CHL 0 +#define RECEIVE_EXT_CHL 4 +#define RECEIVE_RTR_CHL 8 +#define RECEIVE_EXT_RTR_CHL 12 +#define MAX_CHL_NUMBER 32 + +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m + +/* + * bfin can registers layout + */ +struct bfin_can_mask_regs { + __BFP(aml); + __BFP(amh); +}; + +struct bfin_can_channel_regs { + u16 data[8]; + __BFP(dlc); + __BFP(tsv); + __BFP(id0); + __BFP(id1); +}; + +struct bfin_can_regs { + /* + * global control and status registers + */ + __BFP(mc1); /* offset 0x00 */ + __BFP(md1); /* offset 0x04 */ + __BFP(trs1); /* offset 0x08 */ + __BFP(trr1); /* offset 0x0c */ + __BFP(ta1); /* offset 0x10 */ + __BFP(aa1); /* offset 0x14 */ + __BFP(rmp1); /* offset 0x18 */ + __BFP(rml1); /* offset 0x1c */ + __BFP(mbtif1); /* offset 0x20 */ + __BFP(mbrif1); /* offset 0x24 */ + __BFP(mbim1); /* offset 0x28 */ + __BFP(rfh1); /* offset 0x2c */ + __BFP(opss1); /* offset 0x30 */ + u32 __pad1[3]; + __BFP(mc2); /* offset 0x40 */ + __BFP(md2); /* offset 0x44 */ + __BFP(trs2); /* offset 0x48 */ + __BFP(trr2); /* offset 0x4c */ + __BFP(ta2); /* offset 0x50 */ + __BFP(aa2); /* offset 0x54 */ + __BFP(rmp2); /* offset 0x58 */ + __BFP(rml2); /* offset 0x5c */ + __BFP(mbtif2); /* offset 0x60 */ + __BFP(mbrif2); /* offset 0x64 */ + __BFP(mbim2); /* offset 0x68 */ + __BFP(rfh2); /* offset 0x6c */ + __BFP(opss2); /* offset 0x70 */ + u32 __pad2[3]; + __BFP(clock); /* offset 0x80 */ + __BFP(timing); /* offset 0x84 */ + __BFP(debug); /* offset 0x88 */ + __BFP(status); /* offset 0x8c */ + __BFP(cec); /* offset 0x90 */ + __BFP(gis); /* offset 0x94 */ + __BFP(gim); /* offset 0x98 */ + __BFP(gif); /* offset 0x9c */ + __BFP(control); /* offset 0xa0 */ + __BFP(intr); /* offset 0xa4 */ + u32 __pad3[1]; + __BFP(mbtd); /* offset 0xac */ + __BFP(ewr); /* offset 0xb0 */ + __BFP(esr); /* offset 0xb4 */ + u32 __pad4[2]; + __BFP(ucreg); /* offset 0xc0 */ + __BFP(uccnt); /* offset 0xc4 */ + __BFP(ucrc); /* offset 0xc8 */ + __BFP(uccnf); /* offset 0xcc */ + u32 __pad5[12]; + + /* + * channel(mailbox) mask and message registers + */ + struct bfin_can_mask_regs msk[MAX_CHL_NUMBER]; /* offset 0x100 */ + struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */ +}; + +#undef __BFP + +/* CAN_CONTROL Masks */ +#define SRS 0x0001 /* Software Reset */ +#define DNM 0x0002 /* Device Net Mode */ +#define ABO 0x0004 /* Auto-Bus On Enable */ +#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */ +#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */ +#define SMR 0x0020 /* Sleep Mode Request */ +#define CSR 0x0040 /* CAN Suspend Mode Request */ +#define CCR 0x0080 /* CAN Configuration Mode Request */ + +/* CAN_STATUS Masks */ +#define WT 0x0001 /* TX Warning Flag */ +#define WR 0x0002 /* RX Warning Flag */ +#define EP 0x0004 /* Error Passive Mode */ +#define EBO 0x0008 /* Error Bus Off Mode */ +#define SMA 0x0020 /* Sleep Mode Acknowledge */ +#define CSA 0x0040 /* Suspend Mode Acknowledge */ +#define CCA 0x0080 /* Configuration Mode Acknowledge */ +#define MBPTR 0x1F00 /* Mailbox Pointer */ +#define TRM 0x4000 /* Transmit Mode */ +#define REC 0x8000 /* Receive Mode */ + +/* CAN_CLOCK Masks */ +#define BRP 0x03FF /* Bit-Rate Pre-Scaler */ + +/* CAN_TIMING Masks */ +#define TSEG1 0x000F /* Time Segment 1 */ +#define TSEG2 0x0070 /* Time Segment 2 */ +#define SAM 0x0080 /* Sampling */ +#define SJW 0x0300 /* Synchronization Jump Width */ + +/* CAN_DEBUG Masks */ +#define DEC 0x0001 /* Disable CAN Error Counters */ +#define DRI 0x0002 /* Disable CAN RX Input */ +#define DTO 0x0004 /* Disable CAN TX Output */ +#define DIL 0x0008 /* Disable CAN Internal Loop */ +#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */ +#define MRB 0x0020 /* Mode Read Back Enable */ +#define CDE 0x8000 /* CAN Debug Enable */ + +/* CAN_CEC Masks */ +#define RXECNT 0x00FF /* Receive Error Counter */ +#define TXECNT 0xFF00 /* Transmit Error Counter */ + +/* CAN_INTR Masks */ +#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */ +#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */ +#define GIRQ 0x0004 /* Global Interrupt */ +#define SMACK 0x0008 /* Sleep Mode Acknowledge */ +#define CANTX 0x0040 /* CAN TX Bus Value */ +#define CANRX 0x0080 /* CAN RX Bus Value */ + +/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */ +#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define IDE 0x2000 /* Identifier Extension */ +#define RTR 0x4000 /* Remote Frame Transmission Request */ +#define AME 0x8000 /* Acceptance Mask Enable */ + +/* CAN_MBxx_TIMESTAMP Masks */ +#define TSV 0xFFFF /* Timestamp */ + +/* CAN_MBxx_LENGTH Masks */ +#define DLC 0x000F /* Data Length Code */ + +/* CAN_AMxxH and CAN_AMxxL Masks */ +#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */ +#define FMD 0x4000 /* Full Mask Data Field Enable */ +#define FDF 0x8000 /* Filter On Data Field Enable */ + +/* CAN_MC1 Masks */ +#define MC0 0x0001 /* Enable Mailbox 0 */ +#define MC1 0x0002 /* Enable Mailbox 1 */ +#define MC2 0x0004 /* Enable Mailbox 2 */ +#define MC3 0x0008 /* Enable Mailbox 3 */ +#define MC4 0x0010 /* Enable Mailbox 4 */ +#define MC5 0x0020 /* Enable Mailbox 5 */ +#define MC6 0x0040 /* Enable Mailbox 6 */ +#define MC7 0x0080 /* Enable Mailbox 7 */ +#define MC8 0x0100 /* Enable Mailbox 8 */ +#define MC9 0x0200 /* Enable Mailbox 9 */ +#define MC10 0x0400 /* Enable Mailbox 10 */ +#define MC11 0x0800 /* Enable Mailbox 11 */ +#define MC12 0x1000 /* Enable Mailbox 12 */ +#define MC13 0x2000 /* Enable Mailbox 13 */ +#define MC14 0x4000 /* Enable Mailbox 14 */ +#define MC15 0x8000 /* Enable Mailbox 15 */ + +/* CAN_MC2 Masks */ +#define MC16 0x0001 /* Enable Mailbox 16 */ +#define MC17 0x0002 /* Enable Mailbox 17 */ +#define MC18 0x0004 /* Enable Mailbox 18 */ +#define MC19 0x0008 /* Enable Mailbox 19 */ +#define MC20 0x0010 /* Enable Mailbox 20 */ +#define MC21 0x0020 /* Enable Mailbox 21 */ +#define MC22 0x0040 /* Enable Mailbox 22 */ +#define MC23 0x0080 /* Enable Mailbox 23 */ +#define MC24 0x0100 /* Enable Mailbox 24 */ +#define MC25 0x0200 /* Enable Mailbox 25 */ +#define MC26 0x0400 /* Enable Mailbox 26 */ +#define MC27 0x0800 /* Enable Mailbox 27 */ +#define MC28 0x1000 /* Enable Mailbox 28 */ +#define MC29 0x2000 /* Enable Mailbox 29 */ +#define MC30 0x4000 /* Enable Mailbox 30 */ +#define MC31 0x8000 /* Enable Mailbox 31 */ + +/* CAN_MD1 Masks */ +#define MD0 0x0001 /* Enable Mailbox 0 For Receive */ +#define MD1 0x0002 /* Enable Mailbox 1 For Receive */ +#define MD2 0x0004 /* Enable Mailbox 2 For Receive */ +#define MD3 0x0008 /* Enable Mailbox 3 For Receive */ +#define MD4 0x0010 /* Enable Mailbox 4 For Receive */ +#define MD5 0x0020 /* Enable Mailbox 5 For Receive */ +#define MD6 0x0040 /* Enable Mailbox 6 For Receive */ +#define MD7 0x0080 /* Enable Mailbox 7 For Receive */ +#define MD8 0x0100 /* Enable Mailbox 8 For Receive */ +#define MD9 0x0200 /* Enable Mailbox 9 For Receive */ +#define MD10 0x0400 /* Enable Mailbox 10 For Receive */ +#define MD11 0x0800 /* Enable Mailbox 11 For Receive */ +#define MD12 0x1000 /* Enable Mailbox 12 For Receive */ +#define MD13 0x2000 /* Enable Mailbox 13 For Receive */ +#define MD14 0x4000 /* Enable Mailbox 14 For Receive */ +#define MD15 0x8000 /* Enable Mailbox 15 For Receive */ + +/* CAN_MD2 Masks */ +#define MD16 0x0001 /* Enable Mailbox 16 For Receive */ +#define MD17 0x0002 /* Enable Mailbox 17 For Receive */ +#define MD18 0x0004 /* Enable Mailbox 18 For Receive */ +#define MD19 0x0008 /* Enable Mailbox 19 For Receive */ +#define MD20 0x0010 /* Enable Mailbox 20 For Receive */ +#define MD21 0x0020 /* Enable Mailbox 21 For Receive */ +#define MD22 0x0040 /* Enable Mailbox 22 For Receive */ +#define MD23 0x0080 /* Enable Mailbox 23 For Receive */ +#define MD24 0x0100 /* Enable Mailbox 24 For Receive */ +#define MD25 0x0200 /* Enable Mailbox 25 For Receive */ +#define MD26 0x0400 /* Enable Mailbox 26 For Receive */ +#define MD27 0x0800 /* Enable Mailbox 27 For Receive */ +#define MD28 0x1000 /* Enable Mailbox 28 For Receive */ +#define MD29 0x2000 /* Enable Mailbox 29 For Receive */ +#define MD30 0x4000 /* Enable Mailbox 30 For Receive */ +#define MD31 0x8000 /* Enable Mailbox 31 For Receive */ + +/* CAN_RMP1 Masks */ +#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */ +#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */ +#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */ +#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */ +#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */ +#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */ +#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */ +#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */ +#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */ +#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */ +#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */ +#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */ +#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */ +#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */ +#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */ +#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */ + +/* CAN_RMP2 Masks */ +#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */ +#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */ +#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */ +#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */ +#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */ +#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */ +#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */ +#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */ +#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */ +#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */ +#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */ +#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */ +#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */ +#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */ +#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */ +#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */ + +/* CAN_RML1 Masks */ +#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */ +#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */ +#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */ +#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */ +#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */ +#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */ +#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */ +#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */ +#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */ +#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */ +#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */ +#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */ +#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */ +#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */ +#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */ +#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */ + +/* CAN_RML2 Masks */ +#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */ +#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */ +#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */ +#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */ +#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */ +#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */ +#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */ +#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */ +#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */ +#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */ +#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */ +#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */ +#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */ +#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */ +#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */ +#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */ + +/* CAN_OPSS1 Masks */ +#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */ +#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */ +#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */ +#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */ +#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */ +#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */ +#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */ +#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */ +#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */ +#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */ +#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */ +#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */ +#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */ +#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */ +#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */ +#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */ + +/* CAN_OPSS2 Masks */ +#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */ +#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */ +#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */ +#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */ +#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */ +#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */ +#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */ +#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */ +#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */ +#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */ +#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */ +#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */ +#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */ +#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */ +#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */ +#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */ + +/* CAN_TRR1 Masks */ +#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */ +#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */ +#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */ +#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */ +#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */ +#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */ +#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */ +#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */ +#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */ +#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */ +#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */ +#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */ +#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */ +#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */ +#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */ +#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */ + +/* CAN_TRR2 Masks */ +#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */ +#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */ +#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */ +#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */ +#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */ +#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */ +#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */ +#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */ +#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */ +#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */ +#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */ +#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */ +#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */ +#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */ +#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */ +#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */ + +/* CAN_TRS1 Masks */ +#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */ +#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */ +#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */ +#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */ +#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */ +#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */ +#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */ +#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */ +#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */ +#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */ +#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */ +#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */ +#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */ +#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */ +#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */ +#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */ + +/* CAN_TRS2 Masks */ +#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */ +#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */ +#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */ +#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */ +#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */ +#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */ +#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */ +#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */ +#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */ +#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */ +#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */ +#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */ +#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */ +#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */ +#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */ +#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */ + +/* CAN_AA1 Masks */ +#define AA0 0x0001 /* Aborted Message In Mailbox 0 */ +#define AA1 0x0002 /* Aborted Message In Mailbox 1 */ +#define AA2 0x0004 /* Aborted Message In Mailbox 2 */ +#define AA3 0x0008 /* Aborted Message In Mailbox 3 */ +#define AA4 0x0010 /* Aborted Message In Mailbox 4 */ +#define AA5 0x0020 /* Aborted Message In Mailbox 5 */ +#define AA6 0x0040 /* Aborted Message In Mailbox 6 */ +#define AA7 0x0080 /* Aborted Message In Mailbox 7 */ +#define AA8 0x0100 /* Aborted Message In Mailbox 8 */ +#define AA9 0x0200 /* Aborted Message In Mailbox 9 */ +#define AA10 0x0400 /* Aborted Message In Mailbox 10 */ +#define AA11 0x0800 /* Aborted Message In Mailbox 11 */ +#define AA12 0x1000 /* Aborted Message In Mailbox 12 */ +#define AA13 0x2000 /* Aborted Message In Mailbox 13 */ +#define AA14 0x4000 /* Aborted Message In Mailbox 14 */ +#define AA15 0x8000 /* Aborted Message In Mailbox 15 */ + +/* CAN_AA2 Masks */ +#define AA16 0x0001 /* Aborted Message In Mailbox 16 */ +#define AA17 0x0002 /* Aborted Message In Mailbox 17 */ +#define AA18 0x0004 /* Aborted Message In Mailbox 18 */ +#define AA19 0x0008 /* Aborted Message In Mailbox 19 */ +#define AA20 0x0010 /* Aborted Message In Mailbox 20 */ +#define AA21 0x0020 /* Aborted Message In Mailbox 21 */ +#define AA22 0x0040 /* Aborted Message In Mailbox 22 */ +#define AA23 0x0080 /* Aborted Message In Mailbox 23 */ +#define AA24 0x0100 /* Aborted Message In Mailbox 24 */ +#define AA25 0x0200 /* Aborted Message In Mailbox 25 */ +#define AA26 0x0400 /* Aborted Message In Mailbox 26 */ +#define AA27 0x0800 /* Aborted Message In Mailbox 27 */ +#define AA28 0x1000 /* Aborted Message In Mailbox 28 */ +#define AA29 0x2000 /* Aborted Message In Mailbox 29 */ +#define AA30 0x4000 /* Aborted Message In Mailbox 30 */ +#define AA31 0x8000 /* Aborted Message In Mailbox 31 */ + +/* CAN_TA1 Masks */ +#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */ +#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */ +#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */ +#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */ +#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */ +#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */ +#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */ +#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */ +#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */ +#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */ +#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */ +#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */ +#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */ +#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */ +#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */ +#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */ + +/* CAN_TA2 Masks */ +#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */ +#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */ +#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */ +#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */ +#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */ +#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */ +#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */ +#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */ +#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */ +#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */ +#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */ +#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */ +#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */ +#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */ +#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */ +#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */ + +/* CAN_MBTD Masks */ +#define TDPTR 0x001F /* Mailbox To Temporarily Disable */ +#define TDA 0x0040 /* Temporary Disable Acknowledge */ +#define TDR 0x0080 /* Temporary Disable Request */ + +/* CAN_RFH1 Masks */ +#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */ +#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */ +#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */ +#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */ +#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */ +#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */ +#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */ +#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */ +#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */ +#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */ +#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */ +#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */ +#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */ +#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */ +#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */ +#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */ + +/* CAN_RFH2 Masks */ +#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */ +#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */ +#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */ +#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */ +#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */ +#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */ +#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */ +#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */ +#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */ +#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */ +#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */ +#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */ +#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */ +#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */ +#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */ +#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */ + +/* CAN_MBTIF1 Masks */ +#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */ +#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */ +#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */ +#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */ +#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */ +#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */ +#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */ +#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */ +#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */ +#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */ +#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */ +#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */ +#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */ +#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */ +#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */ +#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */ + +/* CAN_MBTIF2 Masks */ +#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */ +#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */ +#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */ +#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */ +#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */ +#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */ +#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */ +#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */ +#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */ +#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */ +#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */ +#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */ +#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */ +#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */ +#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */ +#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */ + +/* CAN_MBRIF1 Masks */ +#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */ +#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */ +#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */ +#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */ +#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */ +#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */ +#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */ +#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */ +#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */ +#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */ +#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */ +#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */ +#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */ +#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */ +#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */ +#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */ + +/* CAN_MBRIF2 Masks */ +#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */ +#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */ +#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */ +#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */ +#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */ +#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */ +#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */ +#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */ +#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */ +#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */ +#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */ +#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */ +#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */ +#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */ +#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */ +#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */ + +/* CAN_MBIM1 Masks */ +#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */ +#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */ +#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */ +#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */ +#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */ +#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */ +#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */ +#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */ +#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */ +#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */ +#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */ +#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */ +#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */ +#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */ +#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */ +#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */ + +/* CAN_MBIM2 Masks */ +#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */ +#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */ +#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */ +#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */ +#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */ +#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */ +#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */ +#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */ +#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */ +#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */ +#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */ +#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */ +#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */ +#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */ +#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */ +#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */ + +/* CAN_GIM Masks */ +#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */ +#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */ +#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ +#define BOIM 0x0008 /* Enable Bus Off Interrupt */ +#define WUIM 0x0010 /* Enable Wake-Up Interrupt */ +#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */ +#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */ +#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ +#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */ +#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */ +#define ADIM 0x0400 /* Enable Access Denied Interrupt */ + +/* CAN_GIS Masks */ +#define EWTIS 0x0001 /* TX Error Count IRQ Status */ +#define EWRIS 0x0002 /* RX Error Count IRQ Status */ +#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ +#define BOIS 0x0008 /* Bus Off IRQ Status */ +#define WUIS 0x0010 /* Wake-Up IRQ Status */ +#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */ +#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */ +#define RMLIS 0x0080 /* RX Message Lost IRQ Status */ +#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */ +#define EXTIS 0x0200 /* External Trigger Output IRQ Status */ +#define ADIS 0x0400 /* Access Denied IRQ Status */ + +/* CAN_GIF Masks */ +#define EWTIF 0x0001 /* TX Error Count IRQ Flag */ +#define EWRIF 0x0002 /* RX Error Count IRQ Flag */ +#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */ +#define BOIF 0x0008 /* Bus Off IRQ Flag */ +#define WUIF 0x0010 /* Wake-Up IRQ Flag */ +#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */ +#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */ +#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */ +#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */ +#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */ +#define ADIF 0x0400 /* Access Denied IRQ Flag */ + +/* CAN_UCCNF Masks */ +#define UCCNF 0x000F /* Universal Counter Mode */ +#define UC_STAMP 0x0001 /* Timestamp Mode */ +#define UC_WDOG 0x0002 /* Watchdog Mode */ +#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */ +#define UC_ERROR 0x0006 /* CAN Error Frame Count */ +#define UC_OVER 0x0007 /* CAN Overload Frame Count */ +#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */ +#define UC_AA 0x0009 /* TX Abort Count */ +#define UC_TA 0x000A /* TX Successful Count */ +#define UC_REJECT 0x000B /* RX Message Rejected Count */ +#define UC_RML 0x000C /* RX Message Lost Count */ +#define UC_RX 0x000D /* Total Successful RX Messages Count */ +#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */ +#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */ +#define UCRC 0x0020 /* Universal Counter Reload/Clear */ +#define UCCT 0x0040 /* Universal Counter CAN Trigger */ +#define UCE 0x0080 /* Universal Counter Enable */ + +/* CAN_ESR Masks */ +#define ACKE 0x0004 /* Acknowledge Error */ +#define SER 0x0008 /* Stuff Error */ +#define CRCE 0x0010 /* CRC Error */ +#define SA0 0x0020 /* Stuck At Dominant Error */ +#define BEF 0x0040 /* Bit Error Flag */ +#define FER 0x0080 /* Form Error Flag */ + +/* CAN_EWR Masks */ +#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */ +#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */ + +#endif diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index b558908e1c79..9626cf7e4251 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -1,7 +1,7 @@ /* - * bfin_sport.h - userspace header for bfin sport driver + * bfin_sport.h - interface to Blackfin SPORTs * - * Copyright 2004-2008 Analog Devices Inc. + * Copyright 2004-2009 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -9,16 +9,6 @@ #ifndef __BFIN_SPORT_H__ #define __BFIN_SPORT_H__ -#ifdef __KERNEL__ -#include <linux/cdev.h> -#include <linux/mutex.h> -#include <linux/sched.h> -#include <linux/wait.h> -#endif - -#define SPORT_MAJOR 237 -#define SPORT_NR_DEVS 2 - /* Sport mode: it can be set to TDM, i2s or others */ #define NORM_MODE 0x0 #define TDM_MODE 0x1 @@ -35,7 +25,7 @@ struct sport_config { unsigned int mode:3; /* if TDM mode is selected, channels must be set */ - int channels; /* Must be in 8 units */ + int channels; /* Must be in 8 units */ unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ /* I2S mode */ @@ -69,94 +59,137 @@ struct sport_config { #ifdef __KERNEL__ -struct sport_register { - unsigned short tcr1; - unsigned short reserved0; - unsigned short tcr2; - unsigned short reserved1; - unsigned short tclkdiv; - unsigned short reserved2; - unsigned short tfsdiv; - unsigned short reserved3; - unsigned long tx; - unsigned long reserved_l0; - unsigned long rx; - unsigned long reserved_l1; - unsigned short rcr1; - unsigned short reserved4; - unsigned short rcr2; - unsigned short reserved5; - unsigned short rclkdiv; - unsigned short reserved6; - unsigned short rfsdiv; - unsigned short reserved7; - unsigned short stat; - unsigned short reserved8; - unsigned short chnl; - unsigned short reserved9; - unsigned short mcmc1; - unsigned short reserved10; - unsigned short mcmc2; - unsigned short reserved11; - unsigned long mtcs0; - unsigned long mtcs1; - unsigned long mtcs2; - unsigned long mtcs3; - unsigned long mrcs0; - unsigned long mrcs1; - unsigned long mrcs2; - unsigned long mrcs3; -}; - -struct sport_dev { - struct cdev cdev; /* Char device structure */ - - int sport_num; +#include <linux/types.h> - int dma_rx_chan; - int dma_tx_chan; - - int rx_irq; - unsigned char *rx_buf; /* Buffer store the received data */ - int rx_len; /* How many bytes will be received */ - int rx_received; /* How many bytes has been received */ - - int tx_irq; - const unsigned char *tx_buf; - int tx_len; - int tx_sent; - - int err_irq; - - struct mutex mutex; /* mutual exclusion semaphore */ - struct task_struct *task; - - wait_queue_head_t waitq; - int wait_con; - struct sport_register *regs; - struct sport_config config; +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m +struct sport_register { + __BFP(tcr1); + __BFP(tcr2); + __BFP(tclkdiv); + __BFP(tfsdiv); + union { + u32 tx32; + u16 tx16; + }; + u32 __pad_tx; + union { + u32 rx32; /* use the anomaly wrapper below */ + u16 rx16; + }; + u32 __pad_rx; + __BFP(rcr1); + __BFP(rcr2); + __BFP(rclkdiv); + __BFP(rfsdiv); + __BFP(stat); + __BFP(chnl); + __BFP(mcmc1); + __BFP(mcmc2); + u32 mtcs0; + u32 mtcs1; + u32 mtcs2; + u32 mtcs3; + u32 mrcs0; + u32 mrcs1; + u32 mrcs2; + u32 mrcs3; }; +#undef __BFP + +#define bfin_read_sport_rx32(base) \ +({ \ + struct sport_register *__mmrs = (void *)base; \ + u32 __ret; \ + unsigned long flags; \ + if (ANOMALY_05000473) \ + local_irq_save(flags); \ + __ret = __mmrs->rx32; \ + if (ANOMALY_05000473) \ + local_irq_restore(flags); \ + __ret; \ +}) #endif -#define SPORT_TCR1 0 -#define SPORT_TCR2 1 -#define SPORT_TCLKDIV 2 -#define SPORT_TFSDIV 3 -#define SPORT_RCR1 8 -#define SPORT_RCR2 9 -#define SPORT_RCLKDIV 10 -#define SPORT_RFSDIV 11 -#define SPORT_CHANNEL 13 -#define SPORT_MCMC1 14 -#define SPORT_MCMC2 15 -#define SPORT_MTCS0 16 -#define SPORT_MTCS1 17 -#define SPORT_MTCS2 18 -#define SPORT_MTCS3 19 -#define SPORT_MRCS0 20 -#define SPORT_MRCS1 21 -#define SPORT_MRCS2 22 -#define SPORT_MRCS3 23 +/* Workaround defBF*.h SPORT MMRs till they get cleansed */ +#undef DTYPE_NORM +#undef SLEN +#undef SP_WOFF +#undef SP_WSIZE + +/* SPORT_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORT_TCR2 Masks */ +#define SLEN 0x001F /* SPORT TX Word Length (2 - 31) */ +#define DP_SLEN(x) BFIN_DEPOSIT(SLEN, x) +#define EX_SLEN(x) BFIN_EXTRACT(SLEN, x) +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* TX Right-First Data Order */ + +/* SPORT_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +/* DTYPE_* defined above */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORT_RCR2 Masks */ +/* SLEN defined above */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORT_STAT Masks */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ + +/* SPORT_MCMC1 Masks */ +#define SP_WOFF 0x03FF /* Multichannel Window Offset Field */ +#define DP_SP_WOFF(x) BFIN_DEPOSIT(SP_WOFF, x) +#define EX_SP_WOFF(x) BFIN_EXTRACT(SP_WOFF, x) +#define SP_WSIZE 0xF000 /* Multichannel Window Size Field */ +#define DP_SP_WSIZE(x) BFIN_DEPOSIT(SP_WSIZE, x) +#define EX_SP_WSIZE(x) BFIN_EXTRACT(SP_WSIZE, x) + +/* SPORT_MCMC2 Masks */ +#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD 0xF000 /* Multichannel Frame Delay */ +#define DP_MFD(x) BFIN_DEPOSIT(MFD, x) +#define EX_MFD(x) BFIN_EXTRACT(MFD, x) #endif diff --git a/arch/blackfin/include/asm/bfin_watchdog.h b/arch/blackfin/include/asm/bfin_watchdog.h new file mode 100644 index 000000000000..dce09829a095 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_watchdog.h @@ -0,0 +1,30 @@ +/* + * bfin_watchdog.h - Blackfin watchdog definitions + * + * Copyright 2006-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _BFIN_WATCHDOG_H +#define _BFIN_WATCHDOG_H + +/* Bit in SWRST that indicates boot caused by watchdog */ +#define SWRST_RESET_WDOG 0x4000 + +/* Bit in WDOG_CTL that indicates watchdog has expired (WDR0) */ +#define WDOG_EXPIRED 0x8000 + +/* Masks for WDEV field in WDOG_CTL register */ +#define ICTL_RESET 0x0 +#define ICTL_NMI 0x2 +#define ICTL_GPI 0x4 +#define ICTL_NONE 0x6 +#define ICTL_MASK 0x6 + +/* Masks for WDEN field in WDOG_CTL register */ +#define WDEN_MASK 0x0FF0 +#define WDEN_ENABLE 0x0000 +#define WDEN_DISABLE 0x0AD0 + +#endif diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index a2ff3fb3568d..605ba8e9b2e4 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -7,22 +7,41 @@ #ifndef _BLACKFIN_BITOPS_H #define _BLACKFIN_BITOPS_H -#ifndef CONFIG_SMP -# include <asm-generic/bitops.h> -#else +#include <linux/compiler.h> + +#include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/__fls.h> +#include <asm-generic/bitops/fls64.h> +#include <asm-generic/bitops/find.h> #ifndef _LINUX_BITOPS_H #error only <linux/bitops.h> can be included directly #endif -#include <linux/compiler.h> -#include <asm/byteorder.h> /* swab32 */ - -#include <asm-generic/bitops/ffs.h> -#include <asm-generic/bitops/__ffs.h> #include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/ffs.h> +#include <asm-generic/bitops/lock.h> +#include <asm-generic/bitops/ext2-non-atomic.h> +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/minix.h> + +#ifndef CONFIG_SMP +#include <linux/irqflags.h> + +/* + * clear_bit may not imply a memory barrier + */ +#ifndef smp_mb__before_clear_bit +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() +#endif +#include <asm-generic/bitops/atomic.h> +#include <asm-generic/bitops/non-atomic.h> +#else +#include <asm/byteorder.h> /* swab32 */ #include <linux/linkage.h> asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr); @@ -89,19 +108,36 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) #include <asm-generic/bitops/non-atomic.h> -#include <asm-generic/bitops/find.h> -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> +#endif /* CONFIG_SMP */ -#include <asm-generic/bitops/ext2-atomic.h> -#include <asm-generic/bitops/ext2-non-atomic.h> +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ -#include <asm-generic/bitops/minix.h> +static inline unsigned int hweight32(unsigned int w) +{ + unsigned int res; -#include <asm-generic/bitops/fls.h> -#include <asm-generic/bitops/__fls.h> -#include <asm-generic/bitops/fls64.h> + __asm__ ("%0.l = ONES %0;" + "%0 = %0.l (Z);" + : "=d" (res) : "d" (w)); + return res; +} -#endif /* CONFIG_SMP */ +static inline unsigned int hweight64(__u64 w) +{ + return hweight32((unsigned int)(w >> 32)) + hweight32((unsigned int)w); +} + +static inline unsigned int hweight16(unsigned int w) +{ + return hweight32(w & 0xffff); +} + +static inline unsigned int hweight8(unsigned int w) +{ + return hweight32(w & 0xff); +} #endif /* _BLACKFIN_BITOPS_H */ diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S index 5dffaf582a22..1f9060395a0a 100644 --- a/arch/blackfin/include/asm/context.S +++ b/arch/blackfin/include/asm/context.S @@ -73,6 +73,11 @@ #else cli r0; #endif +#ifdef CONFIG_TRACE_IRQFLAGS + sp += -12; + call _trace_hardirqs_off; + sp += 12; +#endif [--sp] = RETI; /*orig_pc*/ /* Clear all L registers. */ r0 = 0 (x); @@ -279,6 +284,13 @@ RETN = [sp++]; RETX = [sp++]; RETI = [sp++]; + +#ifdef CONFIG_TRACE_IRQFLAGS + sp += -12; + call _trace_hardirqs_on; + sp += 12; +#endif + RETS = [sp++]; #ifdef CONFIG_SMP @@ -374,3 +386,13 @@ (R7:0, P5:0) = [SP++]; .endm + +.macro pseudo_long_call func:req, scratch:req +#ifdef CONFIG_ROMKERNEL + \scratch\().l = \func; + \scratch\().h = \func; + call (\scratch); +#else + call \func; +#endif +.endm diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h index b191dc662bd8..16883e582e3c 100644 --- a/arch/blackfin/include/asm/cpu.h +++ b/arch/blackfin/include/asm/cpu.h @@ -17,8 +17,6 @@ struct blackfin_cpudata { struct task_struct *idle; unsigned int imemctl; unsigned int dmemctl; - unsigned long dcache_invld_count; - unsigned long icache_invld_count; }; DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data); diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h index 25906468622f..f342ff0319df 100644 --- a/arch/blackfin/include/asm/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -12,6 +12,8 @@ #include <mach/anomaly.h> #define MK_BMSK_(x) (1<<x) +#define BFIN_DEPOSIT(mask, x) (((x) << __ffs(mask)) & (mask)) +#define BFIN_EXTRACT(mask, x) (((x) & (mask)) >> __ffs(mask)) #ifndef __ASSEMBLY__ @@ -23,62 +25,30 @@ # define NOP_PAD_ANOMALY_05000198 #endif -#define bfin_read8(addr) ({ \ - uint32_t __v; \ +#define _bfin_readX(addr, size, asm_size, asm_ext) ({ \ + u32 __v; \ __asm__ __volatile__( \ NOP_PAD_ANOMALY_05000198 \ - "%0 = b[%1] (z);" \ + "%0 = " #asm_size "[%1]" #asm_ext ";" \ : "=d" (__v) \ : "a" (addr) \ ); \ __v; }) - -#define bfin_read16(addr) ({ \ - uint32_t __v; \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "%0 = w[%1] (z);" \ - : "=d" (__v) \ - : "a" (addr) \ - ); \ - __v; }) - -#define bfin_read32(addr) ({ \ - uint32_t __v; \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "%0 = [%1];" \ - : "=d" (__v) \ - : "a" (addr) \ - ); \ - __v; }) - -#define bfin_write8(addr, val) \ +#define _bfin_writeX(addr, val, size, asm_size) \ __asm__ __volatile__( \ NOP_PAD_ANOMALY_05000198 \ - "b[%0] = %1;" \ + #asm_size "[%0] = %1;" \ : \ - : "a" (addr), "d" ((uint8_t)(val)) \ + : "a" (addr), "d" ((u##size)(val)) \ : "memory" \ ) -#define bfin_write16(addr, val) \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "w[%0] = %1;" \ - : \ - : "a" (addr), "d" ((uint16_t)(val)) \ - : "memory" \ - ) - -#define bfin_write32(addr, val) \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "[%0] = %1;" \ - : \ - : "a" (addr), "d" (val) \ - : "memory" \ - ) +#define bfin_read8(addr) _bfin_readX(addr, 8, b, (z)) +#define bfin_read16(addr) _bfin_readX(addr, 16, w, (z)) +#define bfin_read32(addr) _bfin_readX(addr, 32, , ) +#define bfin_write8(addr, val) _bfin_writeX(addr, val, 8, b) +#define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w) +#define bfin_write32(addr, val) _bfin_writeX(addr, val, 32, ) #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h index c31f91cc1d5d..171d8deb04a5 100644 --- a/arch/blackfin/include/asm/delay.h +++ b/arch/blackfin/include/asm/delay.h @@ -30,10 +30,22 @@ __asm__ __volatile__ ( #define HZSCALE (268435456 / (1000000/HZ)) -static inline void udelay(unsigned long usecs) +static inline unsigned long __to_delay(unsigned long scale) { extern unsigned long loops_per_jiffy; - __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); + return (((scale * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6; +} + +static inline void udelay(unsigned long usecs) +{ + __delay(__to_delay(usecs)); } +static inline void ndelay(unsigned long nsecs) +{ + __delay(__to_delay(1) * nsecs / 1000); +} + +#define ndelay ndelay + #endif diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index 413a30314a6f..212cb80fd74b 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -44,13 +44,8 @@ dma_mapping_error(struct device *dev, dma_addr_t dma_addr) extern void __dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir); static inline void -_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir) +__dma_sync_inline(dma_addr_t addr, size_t size, enum dma_data_direction dir) { - if (!__builtin_constant_p(dir)) { - __dma_sync(addr, size, dir); - return; - } - switch (dir) { case DMA_NONE: BUG(); @@ -64,6 +59,14 @@ _dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir) break; } } +static inline void +_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir) +{ + if (__builtin_constant_p(dir)) + __dma_sync_inline(addr, size, dir); + else + __dma_sync(addr, size, dir); +} static inline dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index bd2e62243abe..2c09b1d50ec9 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -262,6 +262,10 @@ static inline void dma_disable_irq(unsigned int channel) { disable_irq(dma_ch[channel].irq); } +static inline void dma_disable_irq_nosync(unsigned int channel) +{ + disable_irq_nosync(dma_ch[channel].irq); +} static inline void dma_enable_irq(unsigned int channel) { enable_irq(dma_ch[channel].irq); diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h index 1597ae5041ee..efcc3aebeae4 100644 --- a/arch/blackfin/include/asm/dpmc.h +++ b/arch/blackfin/include/asm/dpmc.h @@ -75,7 +75,7 @@ #define VLEV 0x00F0 /* Internal Voltage Level */ #ifdef __ADSPBF52x__ -#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ #define VLEV_090 0x0050 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ #define VLEV_095 0x0060 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ #define VLEV_100 0x0070 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ @@ -84,7 +84,7 @@ #define VLEV_115 0x00A0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ #define VLEV_120 0x00B0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ #else -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ #define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ #define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ #define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index 5b50f0ecacf8..117713adea7f 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -22,12 +22,15 @@ #define EF_BFIN_CODE_IN_L2 0x00000040 /* --code-in-l2 */ #define EF_BFIN_DATA_IN_L2 0x00000080 /* --data-in-l2 */ +#if 1 /* core dumps not supported, but linux/elfcore.h needs these */ typedef unsigned long elf_greg_t; -#define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */ +#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) typedef elf_greg_t elf_gregset_t[ELF_NGREG]; typedef struct { } elf_fpregset_t; +#endif + /* * This is used to ensure we don't load something for the wrong architecture. */ @@ -55,6 +58,9 @@ do { \ _regs->p2 = _dynamic_addr; \ } while(0) +#if 0 +#define CORE_DUMP_USE_REGSET +#endif #define ELF_FDPIC_CORE_EFLAGS EF_BFIN_FDPIC #define ELF_EXEC_PAGESIZE 4096 diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h index 90c9b400ba6d..4cfe2d9ba7e8 100644 --- a/arch/blackfin/include/asm/ftrace.h +++ b/arch/blackfin/include/asm/ftrace.h @@ -10,4 +10,57 @@ #define MCOUNT_INSN_SIZE 6 /* sizeof "[++sp] = rets; call __mcount;" */ +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_FRAME_POINTER +#include <linux/mm.h> + +extern inline void *return_address(unsigned int level) +{ + unsigned long *endstack, *fp, *ret_addr; + unsigned int current_level = 0; + + if (level == 0) + return __builtin_return_address(0); + + fp = (unsigned long *)__builtin_frame_address(0); + endstack = (unsigned long *)PAGE_ALIGN((unsigned long)&level); + + while (((unsigned long)fp & 0x3) == 0 && fp && + (fp + 1) < endstack && current_level < level) { + fp = (unsigned long *)*fp; + current_level++; + } + + if (((unsigned long)fp & 0x3) == 0 && fp && + (fp + 1) < endstack) + ret_addr = (unsigned long *)*(fp + 1); + else + ret_addr = NULL; + + return ret_addr; +} + +#else + +extern inline void *return_address(unsigned int level) +{ + return NULL; +} + +#endif /* CONFIG_FRAME_POINTER */ + +#define HAVE_ARCH_CALLER_ADDR + +/* inline function or macro may lead to unexpected result */ +#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) +#define CALLER_ADDR1 ((unsigned long)return_address(1)) +#define CALLER_ADDR2 ((unsigned long)return_address(2)) +#define CALLER_ADDR3 ((unsigned long)return_address(3)) +#define CALLER_ADDR4 ((unsigned long)return_address(4)) +#define CALLER_ADDR5 ((unsigned long)return_address(5)) +#define CALLER_ADDR6 ((unsigned long)return_address(6)) + +#endif /* __ASSEMBLY__ */ + #endif diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 539468a05057..91bd2d7b9d55 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -70,6 +70,8 @@ #ifndef __ASSEMBLY__ +#include <linux/compiler.h> + /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -223,6 +225,9 @@ int bfin_gpio_direction_output(unsigned gpio, int value); int bfin_gpio_get_value(unsigned gpio); void bfin_gpio_set_value(unsigned gpio, int value); +#include <asm/irq.h> +#include <asm/errno.h> + #ifdef CONFIG_GPIOLIB #include <asm-generic/gpio.h> /* cansleep wrappers */ @@ -247,6 +252,11 @@ static inline int gpio_cansleep(unsigned int gpio) return __gpio_cansleep(gpio); } +static inline int gpio_to_irq(unsigned gpio) +{ + return __gpio_to_irq(gpio); +} + #else /* !CONFIG_GPIOLIB */ static inline int gpio_request(unsigned gpio, const char *label) @@ -279,10 +289,6 @@ static inline void gpio_set_value(unsigned gpio, int value) return bfin_gpio_set_value(gpio, value); } -#include <asm-generic/gpio.h> /* cansleep wrappers */ -#endif /* !CONFIG_GPIOLIB */ -#include <asm/irq.h> - static inline int gpio_to_irq(unsigned gpio) { if (likely(gpio < MAX_BLACKFIN_GPIOS)) @@ -291,6 +297,9 @@ static inline int gpio_to_irq(unsigned gpio) return -EINVAL; } +#include <asm-generic/gpio.h> /* cansleep wrappers */ +#endif /* !CONFIG_GPIOLIB */ + static inline int irq_to_gpio(unsigned irq) { return (irq - GPIO_IRQ_BASE); diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index e7c0623f9091..12f4060a31b0 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -12,6 +12,9 @@ #include <linux/irqflags.h> +/* IRQs that may be used by external irq_chip controllers */ +#define NR_SPARE_IRQS 32 + #include <mach/anomaly.h> /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */ @@ -35,4 +38,8 @@ #include <asm-generic/irq.h> +#ifdef CONFIG_NMI_WATCHDOG +# define ARCH_HAS_NMI_WATCHDOG +#endif + #endif /* _BFIN_IRQ_H_ */ diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h index ae8ef4ffd806..7f363d7e43a5 100644 --- a/arch/blackfin/include/asm/mmu_context.h +++ b/arch/blackfin/include/asm/mmu_context.h @@ -13,6 +13,7 @@ #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/cplbinit.h> +#include <asm/sections.h> /* Note: L1 stacks are CPU-private things, so we bluntly disable this feature in SMP mode, and use the per-CPU scratch SRAM bank only to @@ -117,9 +118,16 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr, unsigned long flags) { unsigned long *mask = mm->context.page_rwx_mask; - unsigned long page = addr >> 12; - unsigned long idx = page >> 5; - unsigned long bit = 1 << (page & 31); + unsigned long page; + unsigned long idx; + unsigned long bit; + + if (unlikely(addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)) + page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> 12; + else + page = addr >> 12; + idx = page >> 5; + bit = 1 << (page & 31); if (flags & VM_READ) mask[idx] |= bit; diff --git a/arch/blackfin/include/asm/nmi.h b/arch/blackfin/include/asm/nmi.h new file mode 100644 index 000000000000..b9caac4fcfd8 --- /dev/null +++ b/arch/blackfin/include/asm/nmi.h @@ -0,0 +1,12 @@ +/* + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 + */ + +#ifndef _BFIN_NMI_H_ +#define _BFIN_NMI_H_ + +#include <linux/nmi.h> + +#endif diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 1d04e4078340..d0ce975bcd48 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -15,4 +15,7 @@ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) +#include <asm-generic/memory_model.h> +#include <asm-generic/getorder.h> + #endif diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h index b33a4488f498..aaa1c6c2bc19 100644 --- a/arch/blackfin/include/asm/ptrace.h +++ b/arch/blackfin/include/asm/ptrace.h @@ -24,6 +24,8 @@ #ifndef __ASSEMBLY__ +struct task_struct; + /* this struct defines the way the registers are stored on the stack during a system call. */ @@ -101,9 +103,30 @@ struct pt_regs { master interrupt enable. */ #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1))) #define instruction_pointer(regs) ((regs)->pc) +#define user_stack_pointer(regs) ((regs)->usp) #define profile_pc(regs) instruction_pointer(regs) extern void show_regs(struct pt_regs *); +#define arch_has_single_step() (1) +extern void user_enable_single_step(struct task_struct *child); +extern void user_disable_single_step(struct task_struct *child); +/* common code demands this function */ +#define ptrace_disable(child) user_disable_single_step(child) + +/* + * Get the address of the live pt_regs for the specified task. + * These are saved onto the top kernel stack when the process + * is not running. + * + * Note: if a user thread is execve'd from kernel space, the + * kernel stack will not be empty on entry to the kernel, so + * ptracing these tasks will fail. + */ +#define task_pt_regs(task) \ + (struct pt_regs *) \ + ((unsigned long)task_stack_page(task) + \ + (THREAD_SIZE - sizeof(struct pt_regs))) + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ @@ -173,4 +196,6 @@ extern void show_regs(struct pt_regs *); #define PT_FDPIC_EXEC 232 #define PT_FDPIC_INTERP 236 +#define PT_LAST_PSEUDO PT_FDPIC_INTERP + #endif /* _BFIN_PTRACE_H */ diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h index 42f6c53c59c6..14a3e66d9167 100644 --- a/arch/blackfin/include/asm/sections.h +++ b/arch/blackfin/include/asm/sections.h @@ -21,6 +21,9 @@ extern unsigned long memory_start, memory_end, physical_mem_end; extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[]; extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[], _data_l1_lma[], __weak _data_l1_len[]; +#ifdef CONFIG_ROMKERNEL +extern char _data_lma[], _data_len[], _sinitdata[], _einitdata[], _init_data_lma[], _init_data_len[]; +#endif extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], _data_b_l1_lma[], __weak _data_b_l1_len[]; extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h index 6a0fe94b84a6..f5b537967116 100644 --- a/arch/blackfin/include/asm/smp.h +++ b/arch/blackfin/include/asm/smp.h @@ -22,8 +22,23 @@ extern char coreb_trampoline_start, coreb_trampoline_end; struct corelock_slot { int lock; }; +extern struct corelock_slot corelock; + +#ifdef __ARCH_SYNC_CORE_ICACHE +extern unsigned long icache_invld_count[NR_CPUS]; +#endif +#ifdef __ARCH_SYNC_CORE_DCACHE +extern unsigned long dcache_invld_count[NR_CPUS]; +#endif void smp_icache_flush_range_others(unsigned long start, unsigned long end); +#ifdef CONFIG_HOTPLUG_CPU +void coreb_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); +void cpu_die(void); +void platform_cpu_die(void); +int __cpu_disable(void); +int __cpu_die(unsigned int cpu); +#endif #endif /* !__ASM_BLACKFIN_SMP_H */ diff --git a/arch/blackfin/include/asm/syscall.h b/arch/blackfin/include/asm/syscall.h new file mode 100644 index 000000000000..4921a4815cce --- /dev/null +++ b/arch/blackfin/include/asm/syscall.h @@ -0,0 +1,96 @@ +/* + * Magic syscall break down functions + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_BLACKFIN_SYSCALL_H__ +#define __ASM_BLACKFIN_SYSCALL_H__ + +/* + * Blackfin syscalls are simple: + * enter: + * p0: syscall number + * r{0,1,2,3,4,5}: syscall args 0,1,2,3,4,5 + * exit: + * r0: return/error value + */ + +#include <linux/err.h> +#include <linux/sched.h> +#include <asm/ptrace.h> + +static inline long +syscall_get_nr(struct task_struct *task, struct pt_regs *regs) +{ + return regs->p0; +} + +static inline void +syscall_rollback(struct task_struct *task, struct pt_regs *regs) +{ + regs->p0 = regs->orig_p0; +} + +static inline long +syscall_get_error(struct task_struct *task, struct pt_regs *regs) +{ + return IS_ERR_VALUE(regs->r0) ? regs->r0 : 0; +} + +static inline long +syscall_get_return_value(struct task_struct *task, struct pt_regs *regs) +{ + return regs->r0; +} + +static inline void +syscall_set_return_value(struct task_struct *task, struct pt_regs *regs, + int error, long val) +{ + regs->r0 = error ? -error : val; +} + +/** + * syscall_get_arguments() + * @task: unused + * @regs: the register layout to extract syscall arguments from + * @i: first syscall argument to extract + * @n: number of syscall arguments to extract + * @args: array to return the syscall arguments in + * + * args[0] gets i'th argument, args[n - 1] gets the i+n-1'th argument + */ +static inline void +syscall_get_arguments(struct task_struct *task, struct pt_regs *regs, + unsigned int i, unsigned int n, unsigned long *args) +{ + /* + * Assume the ptrace layout doesn't change -- r5 is first in memory, + * then r4, ..., then r0. So we simply reverse the ptrace register + * array in memory to store into the args array. + */ + long *aregs = ®s->r0 - i; + + BUG_ON(i > 5 || i + n > 6); + + while (n--) + *args++ = *aregs--; +} + +/* See syscall_get_arguments() comments */ +static inline void +syscall_set_arguments(struct task_struct *task, struct pt_regs *regs, + unsigned int i, unsigned int n, const unsigned long *args) +{ + long *aregs = ®s->r0 - i; + + BUG_ON(i > 5 || i + n > 6); + + while (n--) + *aregs-- = *args++; +} + +#endif diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index a40d9368c38a..e9a5614cdbb1 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -17,7 +17,7 @@ /* Thread Align Mask to reach to the top of the stack * for any process */ -#define ALIGN_PAGE_MASK 0xffffe000 +#define ALIGN_PAGE_MASK 0xffffe000 /* * Size of kernel stack for each process. This must be a power of 2... @@ -57,7 +57,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = INIT_PREEMPT_COUNT, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ @@ -73,8 +73,7 @@ __attribute_const__ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; - __asm__("%0 = sp;" : "=da"(ti) : - ); + __asm__("%0 = sp;" : "=da"(ti)); return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1)); } @@ -99,21 +98,23 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 +#define TIF_MEMDIE 4 #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ -#define TIF_FREEZE 6 /* is freezing for suspend */ -#define TIF_IRQ_SYNC 7 /* sync pipeline stage */ -#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ +#define TIF_FREEZE 6 /* is freezing for suspend */ +#define TIF_IRQ_SYNC 7 /* sync pipeline stage */ +#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ +#define TIF_SINGLESTEP 9 /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) -#define _TIF_FREEZE (1<<TIF_FREEZE) -#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC) +#define _TIF_FREEZE (1<<TIF_FREEZE) +#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) +#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h index 589e937ed1eb..9ca7db844d10 100644 --- a/arch/blackfin/include/asm/time.h +++ b/arch/blackfin/include/asm/time.h @@ -23,9 +23,7 @@ */ #ifndef CONFIG_CPU_FREQ -#define TIME_SCALE 1 -#define __bfin_cycles_off (0) -#define __bfin_cycles_mod (0) +# define TIME_SCALE 1 #else /* * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 . @@ -33,9 +31,16 @@ * adjust the Core Timer Presale Register. This way we don't lose time. */ #define TIME_SCALE 4 + +# ifdef CONFIG_CYCLES_CLOCKSOURCE extern unsigned long long __bfin_cycles_off; extern unsigned int __bfin_cycles_mod; +# endif +#endif + +#if defined(CONFIG_TICKSOURCE_CORETMR) +extern void bfin_coretmr_init(void); +extern void bfin_coretmr_clockevent_init(void); #endif -extern void __init setup_core_timer(void); #endif |
