diff options
Diffstat (limited to 'arch/arm')
201 files changed, 4211 insertions, 1389 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 84449dd8f031..a91009c61870 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -293,6 +293,7 @@ config ARCH_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select NEED_MACH_IO_H if PCI select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ @@ -588,6 +589,7 @@ config ARCH_ORION5X select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Orion 5x series SoCs: diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 153a4b2d12b5..c9b4f27d191e 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -11,7 +11,7 @@ /include/ "mmp2.dtsi" / { - model = "Marvell MMP2 Aspenite Development Board"; + model = "Marvell MMP2 Brownstone Development Board"; compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; chosen { @@ -19,7 +19,7 @@ }; memory { - reg = <0x00000000 0x04000000>; + reg = <0x00000000 0x08000000>; }; soc { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f2ab4ea7cc0e..581cb081cb0f 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -44,6 +44,8 @@ compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x480FE000 0x1000>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 8314e4171884..dd4358bc26e2 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 9e61da404d57..419ea7413d23 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1310 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 0d8472e5ab9f..c9a54e06fb68 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1340 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index a26fc47a55e8..d71fe2a68f09 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1340 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 1f8e1e1481df..10dcec7e7321 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr13xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index fc82b1a26458..d71b8d581e3d 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index 01c5e358fdb2..ed3627c116cc 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index dc5e2d445a93..b00544e0cd5d 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index e47081c494d9..62fc4fb3e5f9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 6308fa3bec1e..c13fd1f3b09f 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 5372ca399b1f..1f49d69595a0 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 91072553963f..3a8bb5736928 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr3xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 9d7eb530f95f..aa07f5938f05 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -366,8 +366,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr, struct safe_buffer *buf; unsigned long off; - dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n", - __func__, addr, off, sz, dir); + dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n", + __func__, addr, sz, dir); buf = find_safe_buffer_dev(dev, addr, __func__); if (!buf) @@ -377,8 +377,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr, BUG_ON(buf->direction != dir); - dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off, buf->safe, buf->safe_dma_addr); DO_STATS(dev->archdata.dmabounce->bounce_count++); @@ -406,8 +406,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr, struct safe_buffer *buf; unsigned long off; - dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n", - __func__, addr, off, sz, dir); + dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n", + __func__, addr, sz, dir); buf = find_safe_buffer_dev(dev, addr, __func__); if (!buf) @@ -417,8 +417,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr, BUG_ON(buf->direction != dir); - dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off, buf->safe, buf->safe_dma_addr); DO_STATS(dev->archdata.dmabounce->bounce_count++); diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 7be54690aeec..e42cf597f6e6 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -19,6 +19,7 @@ " .long 1b, 4f, 2b, 4f\n" \ " .popsection\n" \ " .pushsection .fixup,\"ax\"\n" \ + " .align 2\n" \ "4: mov %0, " err_reg "\n" \ " b 3b\n" \ " .popsection" diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index e0d1c0cfa548..6b9b077d86b3 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -4,7 +4,7 @@ * ARM PrimeXsys System Controller SP810 header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 437f0c426517..0d1851ca6eb9 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -495,6 +495,7 @@ ENDPROC(__und_usr) * The out of line fixup for the ldrt above. */ .pushsection .fixup, "ax" + .align 2 4: mov pc, r9 .popsection .pushsection __ex_table,"a" diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c index 8f96ec778e8d..6123daf397a7 100644 --- a/arch/arm/kernel/kprobes-thumb.c +++ b/arch/arm/kernel/kprobes-thumb.c @@ -660,7 +660,7 @@ static const union decode_item t32_table_1111_100x[] = { /* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */ /* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */ /* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */ - DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, + DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, REGS(PC, NOSPPCX, 0, 0, 0)), /* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */ diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 573be57d3d28..6f6d13f91e4c 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -212,7 +212,7 @@ config MACH_SMDKV310 select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select SAMSUNG_DEV_PWM select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 @@ -264,7 +264,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -303,7 +303,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -341,7 +341,7 @@ config MACH_ORIGEN select SAMSUNG_DEV_PWM select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index f8437dd238c2..ded4652ada80 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,4 +1,8 @@ -obj-y := clock.o highbank.o system.o +obj-y := clock.o highbank.o system.o smc.o + +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) + obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index d8e2d0be64ac..141ed5171826 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void); static inline void highbank_lluart_map_io(void) {} #endif +extern void highbank_smc1(int fn, int arg); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 410a112bb52e..8777612b1a42 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = { {} }; +#ifdef CONFIG_CACHE_L2X0 +static void highbank_l2x0_disable(void) +{ + /* Disable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x0); +} +#endif + static void __init highbank_init_irq(void) { of_irq_init(irq_match); + +#ifdef CONFIG_CACHE_L2X0 + /* Enable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x1); l2x0_of_init(0, ~0UL); + outer_cache.disable = highbank_l2x0_disable; +#endif } static void __init highbank_timer_init(void) diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S new file mode 100644 index 000000000000..407d17baaaa9 --- /dev/null +++ b/arch/arm/mach-highbank/smc.S @@ -0,0 +1,27 @@ +/* + * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc. + * Copyright 2012 Calxeda, Inc. + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +/* + * This is common routine to manage secure monitor API + * used to modify the PL310 secure registers. + * 'r0' contains the value to be modified and 'r12' contains + * the monitor API number. + * Function signature : void highbank_smc1(u32 fn, u32 arg) + */ + +ENTRY(highbank_smc1) + stmfd sp!, {r4-r11, lr} + mov r12, r0 + mov r0, r1 + dsb + smc #0 + ldmfd sp!, {r4-r11, pc} +ENDPROC(highbank_smc1) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0021f726b153..eff4db5de0dd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -477,6 +477,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 0f0beb580b73..516ddee1948e 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0"); clk_register_clkdev(clk[clko], "clko", NULL); - mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), - MX1_TIM1_INT); + mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index 4e4f384ee8dd..ea13e61bd5f3 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL); clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL); - mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), - MX21_INT_GPT1); + mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1); + return 0; } diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d9833bb5fd61..fdd8cc87c9fe 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -243,6 +243,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 50a7ebd8d1b2..295cbd7c08dc 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -263,8 +263,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0"); clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1"); - mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), - MX27_INT_GPT1); + mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); clk_prepare_enable(clk[emi_ahb_gate]); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index a854b9cae5ea..c9a06d800f8e 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -175,8 +175,7 @@ int __init mx31_clocks_init(unsigned long fref) mx31_revision(); clk_disable_unprepare(clk[iim_gate]); - mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), - MX31_INT_GPT); + mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index a9e60bf7dd75..920a8cc42726 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -267,11 +267,9 @@ int __init mx35_clocks_init() imx_print_silicon_rev("i.MX35", mx35_revision()); #ifdef CONFIG_MXC_USE_EPIT - epit_timer_init(&epit1_clk, - MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); + epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); #else - mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), - MX35_INT_GPT); + mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); #endif return 0; diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index fcd94f3b0f0e..a2200c77bf70 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -104,12 +104,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, periph_apm_sel, ARRAY_SIZE(periph_apm_sel)); clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1, main_bus_sel, ARRAY_SIZE(main_bus_sel)); - clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1, + clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1, per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel)); clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2); clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3); clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3); - clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0, + clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1, per_root_sel, ARRAY_SIZE(per_root_sel)); clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3); clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28); @@ -172,7 +172,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12); clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14); clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16); - clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18); + clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18); clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24); clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26); clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28); @@ -366,8 +366,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 166250000); /* System timer */ - mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), - MX51_INT_GPT); + mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX51", mx51_revision()); @@ -452,8 +451,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 200000000); /* System timer */ - mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), - MX53_INT_GPT); + mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX53", mx53_revision()); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index cab02d0a15d6..e1a17ac7b3b4 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -122,10 +122,6 @@ static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5 "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", }; -static const char * const clks_init_on[] __initconst = { - "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3", -}; - enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m, @@ -156,16 +152,20 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, clk_max + ssi2_ipg, ssi3_ipg, rom, + clk_max }; static struct clk *clk[clk_max]; +static enum mx6q_clks const clks_init_on[] __initconst = { + mmdc_ch0_axi, rom, +}; + int __init mx6q_clocks_init(void) { struct device_node *np; void __iomem *base; - struct clk *c; int i, irq; clk[dummy] = imx_clk_fixed("dummy", 0); @@ -365,6 +365,7 @@ int __init mx6q_clocks_init(void) clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28); clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); + clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); @@ -424,21 +425,14 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) { - c = clk_get_sys(clks_init_on[i], NULL); - if (IS_ERR(c)) { - pr_err("%s: failed to get clk %s", __func__, - clks_init_on[i]); - return PTR_ERR(c); - } - clk_prepare_enable(c); - } + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clk[clks_init_on[i]]); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(NULL, base, irq); + mxc_timer_init(base, irq); return 0; } diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c index 4685919deb63..0440379e3628 100644 --- a/arch/arm/mach-imx/clk-pllv2.c +++ b/arch/arm/mach-imx/clk-pllv2.c @@ -74,30 +74,15 @@ struct clk_pllv2 { void __iomem *base; }; -static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) +static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate, + u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn) { long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; - unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl; - void __iomem *pllbase; + unsigned long dbl; s64 temp; - struct clk_pllv2 *pll = to_clk_pllv2(hw); - - pllbase = pll->base; - dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN; - if (pll_hfsm == 0) { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); - } else { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); - } pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET; mfi = (mfi <= 5) ? 5 : mfi; @@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, return temp; } -static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, +static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { + u32 dp_op, dp_mfd, dp_mfn, dp_ctl; + void __iomem *pllbase; struct clk_pllv2 *pll = to_clk_pllv2(hw); + + pllbase = pll->base; + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); + + return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn); +} + +static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate, + u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn) +{ u32 reg; - void __iomem *pllbase; long mfi, pdf, mfn, mfd = 999999; s64 temp64; unsigned long quad_parent_rate; - unsigned long pll_hfsm, dp_ctl; - - pllbase = pll->base; quad_parent_rate = 4 * parent_rate; pdf = mfi = -1; @@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; pdf--; - temp64 = rate * (pdf+1) - quad_parent_rate * mfi; - do_div(temp64, quad_parent_rate/1000000); + temp64 = rate * (pdf + 1) - quad_parent_rate * mfi; + do_div(temp64, quad_parent_rate / 1000000); mfn = (long)temp64; + reg = mfi << 4 | pdf; + + *dp_op = reg; + *dp_mfd = mfd; + *dp_mfn = mfn; + + return 0; +} + +static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pllv2 *pll = to_clk_pllv2(hw); + void __iomem *pllbase; + u32 dp_ctl, dp_op, dp_mfd, dp_mfn; + int ret; + + pllbase = pll->base; + + + ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn); + if (ret) + return ret; + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); /* use dpdck0_2 */ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; - if (pll_hfsm == 0) { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN); - } else { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN); - } + + __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP); + __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD); + __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN); return 0; } @@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { - return rate; + u32 dp_op, dp_mfd, dp_mfn; + + __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn); + return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN, + dp_op, dp_mfd, dp_mfn); } static int clk_pllv2_prepare(struct clk_hw *hw) diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7daee2..5e3f1f0f4cab 100644 --- a/arch/arm/mach-imx/crm-regs-imx5.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h @@ -23,7 +23,7 @@ #define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR) #define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR) #define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) -#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) +#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR) /* PLL Register Offsets */ #define MXC_PLL_DP_CTL 0x00 diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 89493abd497c..20ed2d56c1af 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -12,6 +12,7 @@ #include <linux/errno.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <mach/common.h> int platform_cpu_kill(unsigned int cpu) @@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu) return 1; } +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + "mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %3\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + /* * platform-specific code to shutdown a CPU * @@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu) */ void platform_cpu_die(unsigned int cpu) { - flush_cache_all(); + cpu_enter_lowpower(); imx_enable_cpu(cpu, false); cpu_do_idle(); + cpu_leave_lowpower(); /* We should never return from idle */ panic("cpu %d unexpectedly exit from shutdown\n", cpu); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index c515f8ede1a1..6450303f1a7a 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -70,7 +70,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x48), - .type = "tsc2007", .platform_data = &tsc2007_info, .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), }, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index ac50f1671e38..1e09de50cbcd 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x49), - .type = "tsc2007", .platform_data = &tsc2007_info, }, }; diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index dff82eb57cd9..f76edb96a48a 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -116,6 +116,8 @@ static const int visstrim_m10_pins[] __initconst = { PB23_PF_USB_PWR, PB24_PF_USB_OC, /* CSI */ + TVP5150_RSTN | GPIO_GPIO | GPIO_OUT, + TVP5150_PWDN | GPIO_GPIO | GPIO_OUT, PB10_PF_CSI_D0, PB11_PF_CSI_D1, PB12_PF_CSI_D2, @@ -147,6 +149,24 @@ static struct gpio visstrim_m10_version_gpios[] = { { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" }, }; +static const struct gpio visstrim_m10_gpios[] __initconst = { + { + .gpio = TVP5150_RSTN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + .label = "tvp5150_rstn", + }, + { + .gpio = TVP5150_PWDN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "tvp5150_pwdn", + }, + { + .gpio = OTG_PHY_CS_GPIO, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "usbotg_cs", + }, +}; + /* Camera */ static int visstrim_camera_power(struct device *dev, int on) { @@ -190,13 +210,6 @@ static void __init visstrim_camera_init(void) struct platform_device *pdev; int dma; - /* Initialize tvp5150 gpios */ - mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT); - gpio_set_value(TVP5150_RSTN, 1); - gpio_set_value(TVP5150_PWDN, 0); - ndelay(1); - gpio_set_value(TVP5150_PWDN, 1); ndelay(1); gpio_set_value(TVP5150_RSTN, 0); @@ -377,10 +390,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { /* USB OTG */ static int otg_phy_init(struct platform_device *pdev) { - gpio_set_value(OTG_PHY_CS_GPIO, 0); - - mdelay(10); - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } @@ -435,6 +444,11 @@ static void __init visstrim_m10_board_init(void) if (ret) pr_err("Failed to setup pins (%d)\n", ret); + ret = gpio_request_array(visstrim_m10_gpios, + ARRAY_SIZE(visstrim_m10_gpios)); + if (ret) + pr_err("Failed to request gpios (%d)\n", ret); + imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index d14bbe949a4f..3e7401fca76c 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -32,7 +32,7 @@ * Memory-mapped I/O on MX21ADS base board */ #define MX21ADS_MMIO_BASE_ADDR 0xf5000000 -#define MX21ADS_MMIO_SIZE SZ_16M +#define MX21ADS_MMIO_SIZE 0xc00000 #define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ (MX21ADS_MMIO_BASE_ADDR + (offset)) diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 967ed5b35a45..a8983b9778d1 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -86,6 +86,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size, void __init imx3_init_l2x0(void) { +#ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base; void __iomem *clkctl_base; @@ -115,6 +116,7 @@ void __init imx3_init_l2x0(void) } l2x0_init(l2x0_base, 0x00030024, 0x00000000); +#endif } #ifdef CONFIG_SOC_IMX31 @@ -179,6 +181,8 @@ void __init imx31_soc_init(void) mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + pinctrl_provide_dummies(); + if (to_version == 1) { strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", strlen(imx31_sdma_pdata.fw_name)); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index feeee17da96b..1d003053d562 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -202,6 +202,8 @@ void __init imx51_soc_init(void) mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); + pinctrl_provide_dummies(); + /* i.mx51 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index 2222c5739519..b0d3cc49269d 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -20,9 +20,6 @@ #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/leds.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/spi/orion_spi.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/gpio_keys.h> diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 25fb3fd418ef..f261cd242643 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, gate_fn->gate.flags = clk_gate_flags; gate_fn->gate.lock = lock; gate_fn->gate.hw.init = &init; + gate_fn->fn = fn; /* ops is the gate ops, but with our disable function */ if (clk_gate_fn_ops.disable != clk_gate_fn_disable) { @@ -193,9 +194,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name, bit_idx, 0, &gating_lock, fn); } +static struct clk *ge0, *ge1; + void __init kirkwood_clk_init(void) { - struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio; + struct clk *runit, *sata0, *sata1, *usb0, *sdio; struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio; tclk = clk_register_fixed_rate(NULL, "tclk", NULL, @@ -257,6 +260,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, IRQ_KIRKWOOD_GE00_ERR); + /* The interface forgets the MAC address assigned by u-boot if + the clock is turned off, so claim the clk now. */ + clk_prepare_enable(ge0); } @@ -268,6 +274,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, IRQ_KIRKWOOD_GE01_ERR); + clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 3eee37a3b501..a115142f8690 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -38,6 +38,7 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index fede3d503efa..c5b68510776b 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -80,6 +80,7 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) #define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c index fcfe0e3bd701..e60c7d98922b 100644 --- a/arch/arm/mach-mmp/irq.c +++ b/arch/arm/mach-mmp/irq.c @@ -241,6 +241,7 @@ void __init mmp2_init_icu(void) icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE; icu_data[1].nr_irqs = 2; + icu_data[1].cascade_irq = 4; icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs, icu_data[1].virq_base, 0, @@ -249,6 +250,7 @@ void __init mmp2_init_icu(void) icu_data[2].reg_status = mmp_icu_base + 0x154; icu_data[2].reg_mask = mmp_icu_base + 0x16c; icu_data[2].nr_irqs = 2; + icu_data[2].cascade_irq = 5; icu_data[2].virq_base = IRQ_MMP2_RTC_BASE; icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs, icu_data[2].virq_base, 0, @@ -257,6 +259,7 @@ void __init mmp2_init_icu(void) icu_data[3].reg_status = mmp_icu_base + 0x180; icu_data[3].reg_mask = mmp_icu_base + 0x17c; icu_data[3].nr_irqs = 3; + icu_data[3].cascade_irq = 9; icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE; icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs, icu_data[3].virq_base, 0, @@ -265,6 +268,7 @@ void __init mmp2_init_icu(void) icu_data[4].reg_status = mmp_icu_base + 0x158; icu_data[4].reg_mask = mmp_icu_base + 0x170; icu_data[4].nr_irqs = 5; + icu_data[4].cascade_irq = 17; icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE; icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs, icu_data[4].virq_base, 0, @@ -273,6 +277,7 @@ void __init mmp2_init_icu(void) icu_data[5].reg_status = mmp_icu_base + 0x15c; icu_data[5].reg_mask = mmp_icu_base + 0x174; icu_data[5].nr_irqs = 15; + icu_data[5].cascade_irq = 35; icu_data[5].virq_base = IRQ_MMP2_MISC_BASE; icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs, icu_data[5].virq_base, 0, @@ -281,6 +286,7 @@ void __init mmp2_init_icu(void) icu_data[6].reg_status = mmp_icu_base + 0x160; icu_data[6].reg_mask = mmp_icu_base + 0x178; icu_data[6].nr_irqs = 2; + icu_data[6].cascade_irq = 51; icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE; icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs, icu_data[6].virq_base, 0, @@ -289,6 +295,7 @@ void __init mmp2_init_icu(void) icu_data[7].reg_status = mmp_icu_base + 0x188; icu_data[7].reg_mask = mmp_icu_base + 0x184; icu_data[7].nr_irqs = 2; + icu_data[7].cascade_irq = 55; icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE; icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs, icu_data[7].virq_base, 0, diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index f2f8a5847018..c53469802c03 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -37,12 +37,12 @@ #include <plat/board-ams-delta.h> #include <plat/keypad.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/board.h> #include <mach/hardware.h> #include <mach/ams-delta-fiq.h> #include <mach/camera.h> +#include <mach/usb.h> #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index e75e2d55a2d7..6ec385e2b98e 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -23,8 +23,10 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/board.h> + +#include <mach/usb.h> + #include "common.h" /* assume no Mini-AB port */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index a28e989a63f4..44a4ab195fbc 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -40,11 +40,11 @@ #include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h> -#include <plat/usb.h> #include <plat/keypad.h> #include <plat/flash.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 108a8640fc6f..86cb5a04a404 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -40,13 +40,13 @@ #include <plat/mux.h> #include <plat/tc.h> -#include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> #include <plat/flash.h> #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/usb.h> #include "common.h" #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 118a9d4a4c54..b3f6e943e661 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -44,10 +44,10 @@ #include <plat/omap7xx.h> #include <plat/board.h> #include <plat/keypad.h> -#include <plat/usb.h> #include <plat/mmc.h> #include <mach/irqs.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 7970223a559d..f21c2966daad 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -35,11 +35,11 @@ #include <plat/flash.h> #include <plat/fpga.h> #include <plat/tc.h> -#include <plat/usb.h> #include <plat/keypad.h> #include <plat/mmc.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7212ae97f44a..4007a372481b 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/board.h> #include <plat/keypad.h> #include <plat/lcd_mipid.h> @@ -34,6 +33,7 @@ #include <plat/clock.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index da8d872d3d1c..8784705edb60 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -45,11 +45,11 @@ #include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/usb.h> #include <plat/mux.h> #include <plat/tc.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 949b62a73693..26bcb9defcdc 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -35,7 +35,6 @@ #include <plat/flash.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/tc.h> #include <plat/dma.h> #include <plat/board.h> @@ -43,6 +42,7 @@ #include <plat/keypad.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 7f1e1cf2bf46..4d099446dfa8 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -35,7 +35,6 @@ #include <plat/led.h> #include <plat/flash.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/board.h> @@ -43,6 +42,7 @@ #include <plat/keypad.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 3c71c6bace2c..cc71a26723ef 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -37,7 +37,6 @@ #include <plat/flash.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/board.h> @@ -45,6 +44,7 @@ #include <plat/keypad.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 3b7b82b13684..8c665bd16ac2 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -37,13 +37,13 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/irda.h> -#include <plat/usb.h> #include <plat/tc.h> #include <plat/board.h> #include <plat/keypad.h> #include <plat/board-sx1.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index afd67f0ec495..3497769eb353 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -35,9 +35,10 @@ #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> -#include <plat/usb.h> +#include <plat/board.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index c6ce93f71d08..c007d80dfb62 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -25,10 +25,11 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/clkdev_omap.h> +#include <plat/board.h> #include <plat/sram.h> /* for omap_sram_reprogram_clock() */ -#include <plat/usb.h> /* for OTG_BASE */ #include <mach/hardware.h> +#include <mach/usb.h> /* for OTG_BASE */ #include "iomap.h" #include "clock.h" diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h new file mode 100644 index 000000000000..753cd5ce6949 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -0,0 +1,165 @@ +/* + * FIXME correct answer depends on hmc_mode, + * as does (on omap1) any nonzero value for config->otg port number + */ +#ifdef CONFIG_USB_GADGET_OMAP +#define is_usb0_device(config) 1 +#else +#define is_usb0_device(config) 0 +#endif + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; + + struct platform_device *udc_device; + struct platform_device *ohci_device; + struct platform_device *otg_device; + + u32 (*usb0_init)(unsigned nwires, unsigned is_device); + u32 (*usb1_init)(unsigned nwires); + u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); + + int (*ocpi_enable)(void); +}; + +void omap_otg_init(struct omap_usb_config *config); + +#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) +void omap1_usb_init(struct omap_usb_config *pdata); +#else +static inline void omap1_usb_init(struct omap_usb_config *pdata) +{ +} +#endif + +#define OMAP1_OTG_BASE 0xfffb0400 +#define OMAP1_UDC_BASE 0xfffb4000 +#define OMAP1_OHCI_BASE 0xfffba000 + +#define OMAP2_OHCI_BASE 0x4805e000 +#define OMAP2_UDC_BASE 0x4805e200 +#define OMAP2_OTG_BASE 0x4805e300 +#define OTG_BASE OMAP1_OTG_BASE +#define UDC_BASE OMAP1_UDC_BASE +#define OMAP_OHCI_BASE OMAP1_OHCI_BASE + +/* + * OTG and transceiver registers, for OMAPs starting with ARM926 + */ +#define OTG_REV (OTG_BASE + 0x00) +#define OTG_SYSCON_1 (OTG_BASE + 0x04) +# define USB2_TRX_MODE(w) (((w)>>24)&0x07) +# define USB1_TRX_MODE(w) (((w)>>20)&0x07) +# define USB0_TRX_MODE(w) (((w)>>16)&0x07) +# define OTG_IDLE_EN (1 << 15) +# define HST_IDLE_EN (1 << 14) +# define DEV_IDLE_EN (1 << 13) +# define OTG_RESET_DONE (1 << 2) +# define OTG_SOFT_RESET (1 << 1) +#define OTG_SYSCON_2 (OTG_BASE + 0x08) +# define OTG_EN (1 << 31) +# define USBX_SYNCHRO (1 << 30) +# define OTG_MST16 (1 << 29) +# define SRP_GPDATA (1 << 28) +# define SRP_GPDVBUS (1 << 27) +# define SRP_GPUVBUS(w) (((w)>>24)&0x07) +# define A_WAIT_VRISE(w) (((w)>>20)&0x07) +# define B_ASE_BRST(w) (((w)>>16)&0x07) +# define SRP_DPW (1 << 14) +# define SRP_DATA (1 << 13) +# define SRP_VBUS (1 << 12) +# define OTG_PADEN (1 << 10) +# define HMC_PADEN (1 << 9) +# define UHOST_EN (1 << 8) +# define HMC_TLLSPEED (1 << 7) +# define HMC_TLLATTACH (1 << 6) +# define OTG_HMC(w) (((w)>>0)&0x3f) +#define OTG_CTRL (OTG_BASE + 0x0c) +# define OTG_USB2_EN (1 << 29) +# define OTG_USB2_DP (1 << 28) +# define OTG_USB2_DM (1 << 27) +# define OTG_USB1_EN (1 << 26) +# define OTG_USB1_DP (1 << 25) +# define OTG_USB1_DM (1 << 24) +# define OTG_USB0_EN (1 << 23) +# define OTG_USB0_DP (1 << 22) +# define OTG_USB0_DM (1 << 21) +# define OTG_ASESSVLD (1 << 20) +# define OTG_BSESSEND (1 << 19) +# define OTG_BSESSVLD (1 << 18) +# define OTG_VBUSVLD (1 << 17) +# define OTG_ID (1 << 16) +# define OTG_DRIVER_SEL (1 << 15) +# define OTG_A_SETB_HNPEN (1 << 12) +# define OTG_A_BUSREQ (1 << 11) +# define OTG_B_HNPEN (1 << 9) +# define OTG_B_BUSREQ (1 << 8) +# define OTG_BUSDROP (1 << 7) +# define OTG_PULLDOWN (1 << 5) +# define OTG_PULLUP (1 << 4) +# define OTG_DRV_VBUS (1 << 3) +# define OTG_PD_VBUS (1 << 2) +# define OTG_PU_VBUS (1 << 1) +# define OTG_PU_ID (1 << 0) +#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ +# define DRIVER_SWITCH (1 << 15) +# define A_VBUS_ERR (1 << 13) +# define A_REQ_TMROUT (1 << 12) +# define A_SRP_DETECT (1 << 11) +# define B_HNP_FAIL (1 << 10) +# define B_SRP_TMROUT (1 << 9) +# define B_SRP_DONE (1 << 8) +# define B_SRP_STARTED (1 << 7) +# define OPRT_CHG (1 << 0) +#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ + // same bits as in IRQ_EN +#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ +# define OTGVPD (1 << 14) +# define OTGVPU (1 << 13) +# define OTGPUID (1 << 12) +# define USB2VDR (1 << 10) +# define USB2PDEN (1 << 9) +# define USB2PUEN (1 << 8) +# define USB1VDR (1 << 6) +# define USB1PDEN (1 << 5) +# define USB1PUEN (1 << 4) +# define USB0VDR (1 << 2) +# define USB0PDEN (1 << 1) +# define USB0PUEN (1 << 0) +#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ +#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ + +/*-------------------------------------------------------------------------*/ + +/* OMAP1 */ +#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) +# define CONF_USB2_UNI_R (1 << 8) +# define CONF_USB1_UNI_R (1 << 7) +# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) +# define CONF_USB0_ISOLATE_R (1 << 3) +# define CONF_USB_PWRDN_DM_R (1 << 2) +# define CONF_USB_PWRDN_DP_R (1 << 1) diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index e61afd922766..65f88176fba8 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -27,7 +27,8 @@ #include <asm/irq.h> #include <plat/mux.h> -#include <plat/usb.h> + +#include <mach/usb.h> #include "common.h" @@ -55,6 +56,119 @@ #define INT_USB_IRQ_HGEN INT_USB_HHC_1 #define INT_USB_IRQ_OTG IH2_BASE + 8 +#ifdef CONFIG_ARCH_OMAP_OTG + +void __init +omap_otg_init(struct omap_usb_config *config) +{ + u32 syscon; + int alt_pingroup = 0; + + /* NOTE: no bus or clock setup (yet?) */ + + syscon = omap_readl(OTG_SYSCON_1) & 0xffff; + if (!(syscon & OTG_RESET_DONE)) + pr_debug("USB resets not complete?\n"); + + //omap_writew(0, OTG_IRQ_EN); + + /* pin muxing and transceiver pinouts */ + if (config->pins[0] > 2) /* alt pingroup 2 */ + alt_pingroup = 1; + syscon |= config->usb0_init(config->pins[0], is_usb0_device(config)); + syscon |= config->usb1_init(config->pins[1]); + syscon |= config->usb2_init(config->pins[2], alt_pingroup); + pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); + omap_writel(syscon, OTG_SYSCON_1); + + syscon = config->hmc_mode; + syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */; +#ifdef CONFIG_USB_OTG + if (config->otg) + syscon |= OTG_EN; +#endif + if (cpu_class_is_omap1()) + pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", + omap_readl(USB_TRANSCEIVER_CTRL)); + pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2)); + omap_writel(syscon, OTG_SYSCON_2); + + printk("USB: hmc %d", config->hmc_mode); + if (!alt_pingroup) + printk(", usb2 alt %d wires", config->pins[2]); + else if (config->pins[0]) + printk(", usb0 %d wires%s", config->pins[0], + is_usb0_device(config) ? " (dev)" : ""); + if (config->pins[1]) + printk(", usb1 %d wires", config->pins[1]); + if (!alt_pingroup && config->pins[2]) + printk(", usb2 %d wires", config->pins[2]); + if (config->otg) + printk(", Mini-AB on usb%d", config->otg - 1); + printk("\n"); + + if (cpu_class_is_omap1()) { + u16 w; + + /* leave USB clocks/controllers off until needed */ + w = omap_readw(ULPD_SOFT_REQ); + w &= ~SOFT_USB_CLK_REQ; + omap_writew(w, ULPD_SOFT_REQ); + + w = omap_readw(ULPD_CLOCK_CTRL); + w &= ~USB_MCLK_EN; + w |= DIS_USB_PVCI_CLK; + omap_writew(w, ULPD_CLOCK_CTRL); + } + syscon = omap_readl(OTG_SYSCON_1); + syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; + +#ifdef CONFIG_USB_GADGET_OMAP + if (config->otg || config->register_dev) { + struct platform_device *udc_device = config->udc_device; + int status; + + syscon &= ~DEV_IDLE_EN; + udc_device->dev.platform_data = config; + status = platform_device_register(udc_device); + if (status) + pr_debug("can't register UDC device, %d\n", status); + } +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + if (config->otg || config->register_host) { + struct platform_device *ohci_device = config->ohci_device; + int status; + + syscon &= ~HST_IDLE_EN; + ohci_device->dev.platform_data = config; + status = platform_device_register(ohci_device); + if (status) + pr_debug("can't register OHCI device, %d\n", status); + } +#endif + +#ifdef CONFIG_USB_OTG + if (config->otg) { + struct platform_device *otg_device = config->otg_device; + int status; + + syscon &= ~OTG_IDLE_EN; + otg_device->dev.platform_data = config; + status = platform_device_register(otg_device); + if (status) + pr_debug("can't register OTG device, %d\n", status); + } +#endif + pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); + omap_writel(syscon, OTG_SYSCON_1); +} + +#else +void omap_otg_init(struct omap_usb_config *config) {} +#endif + #ifdef CONFIG_USB_GADGET_OMAP static struct resource udc_resources[] = { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4cf5142f22cc..042f157a8f94 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -64,19 +64,16 @@ config SOC_OMAP2420 depends on ARCH_OMAP2 default y select OMAP_DM_TIMER - select ARCH_OMAP_OTG config SOC_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 default y - select ARCH_OMAP_OTG config SOC_OMAP3430 bool "OMAP3430 support" depends on ARCH_OMAP3 default y - select ARCH_OMAP_OTG config SOC_TI81XX bool "TI81XX support" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fa742f3c2629..54ad3a4b612c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o +obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o @@ -99,6 +100,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o +obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o @@ -113,10 +115,11 @@ obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o +obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o # PRCM clockdomain control clockdomain-common += clockdomain.o -clockdomain-common += clockdomains_common_data.o obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o @@ -129,6 +132,8 @@ obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o +obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o # Clock framework obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o @@ -244,9 +249,6 @@ obj-y += $(omap-flash-y) $(omap-flash-m) omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) - -usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o -obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o obj-y += omap_phy_internal.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 99ca6bad5c30..6523aeabf9f2 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -254,16 +254,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct omap_usb_config sdp2430_usb_config __initdata = { - .otg = 1, -#ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 0x0, -#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - .hmc_mode = 0x1, -#endif - .pins[0] = 3, -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -280,7 +270,6 @@ static void __init omap_2430sdp_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); omap_hsmmc_init(mmc); - omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); usb_musb_init(NULL); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 502c31e123be..519bcd3079e8 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -35,7 +35,6 @@ #include <asm/mach/flash.h> #include <plat/led.h> -#include <plat/usb.h> #include <plat/board.h> #include "common.h" #include <plat/gpmc.h> @@ -253,13 +252,6 @@ out: clk_put(gpmc_fck); } -static struct omap_usb_config apollon_usb_config __initdata = { - .register_dev = 1, - .hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */ - - .pins[0] = 6, -}; - static struct panel_generic_dpi_data apollon_panel_data = { .name = "apollon", }; @@ -297,15 +289,6 @@ static void __init apollon_led_init(void) gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); } -static void __init apollon_usb_init(void) -{ - /* USB device */ - /* DEVICE_SUSPEND */ - omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend"); - omap2_usbfs_init(&apollon_usb_config); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -321,7 +304,6 @@ static void __init omap_apollon_init(void) apollon_init_smc91x(); apollon_led_init(); apollon_flash_init(); - apollon_usb_init(); /* REVISIT: where's the correct place */ omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 70a81f900bb5..53c39d239d6e 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, gpmc_onenand_init(&board_onenand_data); } -#else -void -__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) -{ -} #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */ #if defined(CONFIG_MTD_NAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 202934657867..2f2abfb82d84 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -112,6 +112,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") MACHINE_END #endif +#ifdef CONFIG_SOC_AM33XX +static const char *am33xx_boards_compat[] __initdata = { + "ti,am33xx", + NULL, +}; + +DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = am33xx_map_io, + .init_early = am33xx_init_early, + .init_irq = omap_init_irq, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap3_am33xx_timer, + .dt_compat = am33xx_boards_compat, +MACHINE_END +#endif + #ifdef CONFIG_ARCH_OMAP4 static const char *omap4_boards_compat[] __initdata = { "ti,omap4", diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 876becf8205a..ace20482e3e1 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include <plat/board.h> #include "common.h" #include <plat/menelaus.h> @@ -329,17 +328,6 @@ static void __init h4_init_flash(void) h4_flash_resource.end = base + SZ_64M - 1; } -static struct omap_usb_config h4_usb_config __initdata = { - /* S1.10 OFF -- usb "download port" - * usb0 switched to Mini-B port and isp1105 transceiver; - * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging - */ - .register_dev = 1, - .pins[0] = 3, -/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */ - .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */ -}; - static struct at24_platform_data m24c01 = { .byte_len = SZ_1K / 8, .page_size = 16, @@ -381,7 +369,6 @@ static void __init omap_h4_init(void) ARRAY_SIZE(h4_i2c_board_info)); platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); - omap2_usbfs_init(&h4_usb_config); omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8ca14e88a31a..2c5d0ed75285 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#if defined(CONFIG_USB_MUSB_OTG) +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ +#else .mode = MUSB_HOST, #endif .set_power = tusb_set_power, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 79c6909eeb78..580fd17208da 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -81,13 +81,13 @@ static u8 omap3_beagle_version; static struct { int mmc1_gpio_wp; int usb_pwr_level; - int reset_gpio; + int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, - .reset_gpio = 129, + .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; @@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; beagle_config.mmc1_gpio_wp = 29; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 0: @@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev, if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "DVI_LDO_EN"); - if (r) - pr_err("%s: unable to configure DVI_LDO_EN\n", - __func__); + + beagle_config.dvi_pd_gpio = gpio + 2; + } else { /* * REVISIT: need ehci-omap hooks for external VBUS @@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); - if (beagle_config.mmc1_gpio_wp != -EINVAL) + if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); @@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void) platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + if (gpio_is_valid(beagle_config.dvi_pd_gpio)) + omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ff53deccecab..df2534de3361 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { .release_resources = lis302_release, .st_min_limits = {-32, 3, 3}, .st_max_limits = {-3, 32, 32}, - .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), }; #endif @@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { { I2C_BOARD_INFO("lis3lv02d", 0x1d), .platform_data = &rx51_lis3lv02d_data, - .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), }, #endif }; @@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); + rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); +#endif omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 861767ed1a3a..002745181ad6 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1774,8 +1774,6 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_242X), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_242X), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_242X), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_242X), @@ -1784,8 +1782,6 @@ static struct omap_clk omap2420_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X), CLK(NULL, "core_ck", &core_ck, CK_242X), - CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_242X), - CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_242X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 5577810dbc26..cacabb070e22 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1858,11 +1858,6 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_243X), CLK(NULL, "sys_ck", &sys_ck, CK_243X), CLK(NULL, "alt_ck", &alt_ck, CK_243X), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_243X), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_243X), @@ -1871,11 +1866,6 @@ static struct omap_clk omap2430_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X), CLK(NULL, "core_ck", &core_ck, CK_243X), - CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.3", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.4", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.5", "prcm_fck", &func_96m_ck, CK_243X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 64b2b1fafddd..71a1d3383807 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3236,11 +3236,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX), CLK(NULL, "sys_ck", &sys_ck, CK_3XXX), CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_3XXX), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX), CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX), CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX), @@ -3307,8 +3302,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), - CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX), @@ -3413,9 +3406,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX), CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX), CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX), - CLK("omap-mcbsp.2", "prcm_fck", &per_96m_fck, CK_3XXX), - CLK("omap-mcbsp.3", "prcm_fck", &per_96m_fck, CK_3XXX), - CLK("omap-mcbsp.4", "prcm_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), @@ -3492,7 +3482,7 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = 0; - if (cpu_is_omap3517()) { + if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; cpu_clkflg = CK_AM35XX; } else if (cpu_is_omap3630()) { diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 51f7424c7caa..de53b7014b80 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -84,6 +84,7 @@ static struct clk slimbus_clk = { static struct clk sys_32k_ck = { .name = "sys_32k_ck", + .clkdm_name = "prm_clkdm", .rate = 32768, .ops = &clkops_null, }; @@ -512,6 +513,7 @@ static struct clk ddrphy_ck = { .name = "ddrphy_ck", .parent = &dpll_core_m2_ck, .ops = &clkops_null, + .clkdm_name = "l3_emif_clkdm", .fixed_div = 2, .recalc = &omap_fixed_divisor_recalc, }; @@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = { static struct clk dpll_mpu_m2_ck = { .name = "dpll_mpu_m2_ck", .parent = &dpll_mpu_ck, + .clkdm_name = "cm_clkdm", .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, @@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = { static struct clk l3_div_ck = { .name = "l3_div_ck", .parent = &div_core_ck, + .clkdm_name = "cm_clkdm", .clksel = l3_div_div, .clksel_reg = OMAP4430_CM_CLKSEL_CORE, .clksel_mask = OMAP4430_CLKSEL_L3_MASK, @@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = { static struct clk trace_clk_div_ck = { .name = "trace_clk_div_ck", .parent = &pmd_trace_clk_mux_ck, + .clkdm_name = "emu_sys_clkdm", .clksel = trace_clk_div_div, .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, @@ -3402,9 +3407,12 @@ int __init omap4xxx_clk_init(void) if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; cpu_clkflg = CK_443X; - } else if (cpu_is_omap446x()) { + } else if (cpu_is_omap446x() || cpu_is_omap447x()) { cpu_mask = RATE_IN_4460 | RATE_IN_4430; cpu_clkflg = CK_446X | CK_443X; + + if (cpu_is_omap447x()) + pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); } else { return 0; } diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index f7b58609bad8..0a8c7b67858c 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -195,6 +195,7 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh); extern void __init omap242x_clockdomains_init(void); extern void __init omap243x_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); +extern void __init am33xx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); extern void _clkdm_add_autodeps(struct clockdomain *clkdm); extern void _clkdm_del_autodeps(struct clockdomain *clkdm); @@ -202,11 +203,10 @@ extern void _clkdm_del_autodeps(struct clockdomain *clkdm); extern struct clkdm_ops omap2_clkdm_operations; extern struct clkdm_ops omap3_clkdm_operations; extern struct clkdm_ops omap4_clkdm_operations; +extern struct clkdm_ops am33xx_clkdm_operations; extern struct clkdm_dep gfx_24xx_wkdeps[]; extern struct clkdm_dep dsp_24xx_wkdeps[]; extern struct clockdomain wkup_common_clkdm; -extern struct clockdomain prm_common_clkdm; -extern struct clockdomain cm_common_clkdm; #endif diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c new file mode 100644 index 000000000000..aca6388fad76 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomain33xx.c @@ -0,0 +1,74 @@ +/* + * AM33XX clockdomain control + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> + +#include "clockdomain.h" +#include "cm33xx.h" + + +static int am33xx_clkdm_sleep(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static int am33xx_clkdm_wakeup(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + return am33xx_clkdm_wakeup(clkdm); + + return 0; +} + +static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); + + if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) + am33xx_clkdm_sleep(clkdm); + + return 0; +} + +struct clkdm_ops am33xx_clkdm_operations = { + .clkdm_sleep = am33xx_clkdm_sleep, + .clkdm_wakeup = am33xx_clkdm_wakeup, + .clkdm_allow_idle = am33xx_clkdm_allow_idle, + .clkdm_deny_idle = am33xx_clkdm_deny_idle, + .clkdm_clk_enable = am33xx_clkdm_clk_enable, + .clkdm_clk_disable = am33xx_clkdm_clk_disable, +}; diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c index 0ab8e46d5b2b..5c741852fac0 100644 --- a/arch/arm/mach-omap2/clockdomains2420_data.c +++ b/arch/arm/mach-omap2/clockdomains2420_data.c @@ -131,8 +131,6 @@ static struct clockdomain dss_2420_clkdm = { static struct clockdomain *clockdomains_omap242x[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &mpu_2420_clkdm, &iva1_2420_clkdm, &dsp_2420_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c index 3645ed044890..f09617555e15 100644 --- a/arch/arm/mach-omap2/clockdomains2430_data.c +++ b/arch/arm/mach-omap2/clockdomains2430_data.c @@ -157,8 +157,6 @@ static struct clockdomain dss_2430_clkdm = { static struct clockdomain *clockdomains_omap243x[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &mpu_2430_clkdm, &mdm_clkdm, &dsp_2430_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c new file mode 100644 index 000000000000..32c90fd9eba2 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains33xx_data.c @@ -0,0 +1,196 @@ +/* + * AM33XX Clock Domain data. + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/io.h> + +#include "clockdomain.h" +#include "cm.h" +#include "cm33xx.h" +#include "cm-regbits-33xx.h" + +static struct clockdomain l4ls_am33xx_clkdm = { + .name = "l4ls_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3s_am33xx_clkdm = { + .name = "l3s_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4fw_am33xx_clkdm = { + .name = "l4fw_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3_am33xx_clkdm = { + .name = "l3_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4hs_am33xx_clkdm = { + .name = "l4hs_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain ocpwp_l3_am33xx_clkdm = { + .name = "ocpwp_l3_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain pruss_ocp_am33xx_clkdm = { + .name = "pruss_ocp_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain cpsw_125mhz_am33xx_clkdm = { + .name = "cpsw_125mhz_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain lcdc_am33xx_clkdm = { + .name = "lcdc_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain clk_24mhz_am33xx_clkdm = { + .name = "clk_24mhz_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_wkup_am33xx_clkdm = { + .name = "l4_wkup_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .cm_inst = AM33XX_CM_WKUP_MOD, + .clkdm_offs = AM33XX_CM_WKUP_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3_aon_am33xx_clkdm = { + .name = "l3_aon_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .cm_inst = AM33XX_CM_WKUP_MOD, + .clkdm_offs = AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_wkup_aon_am33xx_clkdm = { + .name = "l4_wkup_aon_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .cm_inst = AM33XX_CM_WKUP_MOD, + .clkdm_offs = AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain mpu_am33xx_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .cm_inst = AM33XX_CM_MPU_MOD, + .clkdm_offs = AM33XX_CM_MPU_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_rtc_am33xx_clkdm = { + .name = "l4_rtc_clkdm", + .pwrdm = { .name = "rtc_pwrdm" }, + .cm_inst = AM33XX_CM_RTC_MOD, + .clkdm_offs = AM33XX_CM_RTC_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain gfx_l3_am33xx_clkdm = { + .name = "gfx_l3_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .cm_inst = AM33XX_CM_GFX_MOD, + .clkdm_offs = AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain gfx_l4ls_gfx_am33xx_clkdm = { + .name = "gfx_l4ls_gfx_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .cm_inst = AM33XX_CM_GFX_MOD, + .clkdm_offs = AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_cefuse_am33xx_clkdm = { + .name = "l4_cefuse_clkdm", + .pwrdm = { .name = "cefuse_pwrdm" }, + .cm_inst = AM33XX_CM_CEFUSE_MOD, + .clkdm_offs = AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain *clockdomains_am33xx[] __initdata = { + &l4ls_am33xx_clkdm, + &l3s_am33xx_clkdm, + &l4fw_am33xx_clkdm, + &l3_am33xx_clkdm, + &l4hs_am33xx_clkdm, + &ocpwp_l3_am33xx_clkdm, + &pruss_ocp_am33xx_clkdm, + &cpsw_125mhz_am33xx_clkdm, + &lcdc_am33xx_clkdm, + &clk_24mhz_am33xx_clkdm, + &l4_wkup_am33xx_clkdm, + &l3_aon_am33xx_clkdm, + &l4_wkup_aon_am33xx_clkdm, + &mpu_am33xx_clkdm, + &l4_rtc_am33xx_clkdm, + &gfx_l3_am33xx_clkdm, + &gfx_l4ls_gfx_am33xx_clkdm, + &l4_cefuse_am33xx_clkdm, + NULL, +}; + +void __init am33xx_clockdomains_init(void) +{ + clkdm_register_platform_funcs(&am33xx_clkdm_operations); + clkdm_register_clkdms(clockdomains_am33xx); + clkdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 6038adb97710..2cdc17c9d2fa 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -347,8 +347,6 @@ static struct clkdm_autodep clkdm_autodeps[] = { static struct clockdomain *clockdomains_omap3430_common[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &mpu_3xxx_clkdm, &neon_clkdm, &iva2_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index c53425847493..bd7ed13515cc 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -430,8 +430,6 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = { &l4_wkup_44xx_clkdm, &emu_sys_44xx_clkdm, &l3_dma_44xx_clkdm, - &prm_common_clkdm, - &cm_common_clkdm, NULL }; diff --git a/arch/arm/mach-omap2/clockdomains_common_data.c b/arch/arm/mach-omap2/clockdomains_common_data.c deleted file mode 100644 index 615b1f04967d..000000000000 --- a/arch/arm/mach-omap2/clockdomains_common_data.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * OMAP2+-common clockdomain data - * - * Copyright (C) 2008-2012 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Paul Walmsley, Jouni Högander - */ - -#include <linux/kernel.h> -#include <linux/io.h> - -#include "clockdomain.h" - -/* These are implicit clockdomains - they are never defined as such in TRM */ -struct clockdomain prm_common_clkdm = { - .name = "prm_clkdm", - .pwrdm = { .name = "wkup_pwrdm" }, -}; - -struct clockdomain cm_common_clkdm = { - .name = "cm_clkdm", - .pwrdm = { .name = "core_pwrdm" }, -}; diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h new file mode 100644 index 000000000000..532027ee3d8d --- /dev/null +++ b/arch/arm/mach-omap2/cm-regbits-33xx.h @@ -0,0 +1,687 @@ +/* + * AM33XX Power Management register bits + * + * This file is automatically generated from the AM33XX hardware databases. + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H + +/* + * Used by CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_DDR, CM_AUTOIDLE_DPLL_DISP, + * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER + */ +#define AM33XX_AUTO_DPLL_MODE_SHIFT 0 +#define AM33XX_AUTO_DPLL_MODE_MASK (0x7 << 0) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT 14 +#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK (1 << 16) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT 11 +#define AM33XX_CLKACTIVITY_CAN_CLK_MASK (1 << 11) + +/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK (1 << 4) + +/* Used by CM_PER_CPSW_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK (1 << 4) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK (1 << 4) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK (1 << 5) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK (1 << 6) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK (1 << 6) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9) + +/* Used by CM_L3_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK (1 << 2) + +/* Used by CM_L3_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT 4 +#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK (1 << 4) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK (1 << 2) + +/* Used by CM_GFX_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK (1 << 9) + +/* Used by CM_GFX_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK (1 << 8) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK (1 << 8) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT 19 +#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK (1 << 19) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT 20 +#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK (1 << 20) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT 21 +#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK (1 << 21) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT 22 +#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK (1 << 22) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT 26 +#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK (1 << 26) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT 18 +#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK (1 << 18) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT 11 +#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK (1 << 11) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT 24 +#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK (1 << 24) + +/* Used by CM_PER_PRUSS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK (1 << 5) + +/* Used by CM_PER_PRUSS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK (1 << 4) + +/* Used by CM_PER_PRUSS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK (1 << 6) + +/* Used by CM_PER_L3S_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK (1 << 3) + +/* Used by CM_L3_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK (1 << 3) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_L3_GCLK_MASK (1 << 4) + +/* Used by CM_PER_L4FW_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK (1 << 8) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK (1 << 3) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK (1 << 8) + +/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */ +#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK (1 << 8) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8) + +/* Used by CM_RTC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK (1 << 8) + +/* Used by CM_L4_WKUP_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK (1 << 2) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK (1 << 2) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT 17 +#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK (1 << 17) + +/* Used by CM_PER_LCDC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK (1 << 4) + +/* Used by CM_PER_LCDC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK (1 << 5) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT 7 +#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK (1 << 7) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK (1 << 3) + +/* Used by CM_MPU_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_MPU_CLK_MASK (1 << 2) + +/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK (1 << 4) + +/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK (1 << 5) + +/* Used by CM_RTC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK (1 << 9) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT 25 +#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK (1 << 25) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK (1 << 3) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT 10 +#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK (1 << 10) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT 13 +#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK (1 << 13) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT 14 +#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK (1 << 14) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT 15 +#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK (1 << 15) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT 16 +#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK (1 << 16) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT 27 +#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK (1 << 27) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT 28 +#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK (1 << 28) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT 13 +#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK (1 << 13) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT 12 +#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK (1 << 12) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT 10 +#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK (1 << 10) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK (1 << 9) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK (1 << 4) + +/* Used by CLKSEL_GFX_FCLK */ +#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT 0 +#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK (1 << 0) + +/* Used by CM_CLKOUT_CTRL */ +#define AM33XX_CLKOUT2DIV_SHIFT 3 +#define AM33XX_CLKOUT2DIV_MASK (0x05 << 3) + +/* Used by CM_CLKOUT_CTRL */ +#define AM33XX_CLKOUT2EN_SHIFT 7 +#define AM33XX_CLKOUT2EN_MASK (1 << 7) + +/* Used by CM_CLKOUT_CTRL */ +#define AM33XX_CLKOUT2SOURCE_SHIFT 0 +#define AM33XX_CLKOUT2SOURCE_MASK (0x02 << 0) + +/* + * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK, + * CLKSEL_TIMER3_CLK, CLKSEL_TIMER4_CLK, CLKSEL_TIMER5_CLK, CLKSEL_TIMER6_CLK, + * CLKSEL_TIMER7_CLK + */ +#define AM33XX_CLKSEL_SHIFT 0 +#define AM33XX_CLKSEL_MASK (0x01 << 0) + +/* + * Renamed from CLKSEL Used by CLKSEL_PRUSS_OCP_CLK, CLKSEL_WDT1_CLK, + * CM_CPTS_RFT_CLKSEL + */ +#define AM33XX_CLKSEL_0_0_SHIFT 0 +#define AM33XX_CLKSEL_0_0_MASK (1 << 0) + +#define AM33XX_CLKSEL_0_1_SHIFT 0 +#define AM33XX_CLKSEL_0_1_MASK (3 << 0) + +/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */ +#define AM33XX_CLKSEL_0_2_SHIFT 0 +#define AM33XX_CLKSEL_0_2_MASK (7 << 0) + +/* Used by CLKSEL_GFX_FCLK */ +#define AM33XX_CLKSEL_GFX_FCLK_SHIFT 1 +#define AM33XX_CLKSEL_GFX_FCLK_MASK (1 << 1) + +/* + * Used by CM_MPU_CLKSTCTRL, CM_RTC_CLKSTCTRL, CM_PER_CLK_24MHZ_CLKSTCTRL, + * CM_PER_CPSW_CLKSTCTRL, CM_PER_PRUSS_CLKSTCTRL, CM_PER_L3S_CLKSTCTRL, + * CM_PER_L3_CLKSTCTRL, CM_PER_L4FW_CLKSTCTRL, CM_PER_L4HS_CLKSTCTRL, + * CM_PER_L4LS_CLKSTCTRL, CM_PER_LCDC_CLKSTCTRL, CM_PER_OCPWP_L3_CLKSTCTRL, + * CM_L3_AON_CLKSTCTRL, CM_L4_WKUP_AON_CLKSTCTRL, CM_WKUP_CLKSTCTRL, + * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL + */ +#define AM33XX_CLKTRCTRL_SHIFT 0 +#define AM33XX_CLKTRCTRL_MASK (0x3 << 0) + +/* + * Used by CM_SSC_DELTAMSTEP_DPLL_CORE, CM_SSC_DELTAMSTEP_DPLL_DDR, + * CM_SSC_DELTAMSTEP_DPLL_DISP, CM_SSC_DELTAMSTEP_DPLL_MPU, + * CM_SSC_DELTAMSTEP_DPLL_PER + */ +#define AM33XX_DELTAMSTEP_SHIFT 0 +#define AM33XX_DELTAMSTEP_MASK (0x19 << 0) + +/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */ +#define AM33XX_DPLL_BYP_CLKSEL_SHIFT 23 +#define AM33XX_DPLL_BYP_CLKSEL_MASK (1 << 23) + +/* Used by CM_CLKDCOLDO_DPLL_PER */ +#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8 +#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_CLKDCOLDO_DPLL_PER */ +#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT 12 +#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK (1 << 12) + +/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */ +#define AM33XX_DPLL_CLKOUT_DIV_SHIFT 0 +#define AM33XX_DPLL_CLKOUT_DIV_MASK (0x1f << 0) + +/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */ +#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT 0 +#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x06 << 0) + +/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */ +#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT 5 +#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5) + +/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */ +#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT 7 +#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK (1 << 7) + +/* + * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER + */ +#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT 8 +#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) + +/* + * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, + * CM_CLKSEL_DPLL_MPU + */ +#define AM33XX_DPLL_DIV_SHIFT 0 +#define AM33XX_DPLL_DIV_MASK (0x7f << 0) + +#define AM33XX_DPLL_PER_DIV_MASK (0xff << 0) + +/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */ +#define AM33XX_DPLL_DIV_0_7_SHIFT 0 +#define AM33XX_DPLL_DIV_0_7_MASK (0x07 << 0) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU + */ +#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define AM33XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_EN_SHIFT 0 +#define AM33XX_DPLL_EN_MASK (0x7 << 0) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU + */ +#define AM33XX_DPLL_LPMODE_EN_SHIFT 10 +#define AM33XX_DPLL_LPMODE_EN_MASK (1 << 10) + +/* + * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, + * CM_CLKSEL_DPLL_MPU + */ +#define AM33XX_DPLL_MULT_SHIFT 8 +#define AM33XX_DPLL_MULT_MASK (0x7ff << 8) + +/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */ +#define AM33XX_DPLL_MULT_PERIPH_SHIFT 8 +#define AM33XX_DPLL_MULT_PERIPH_MASK (0xfff << 8) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU + */ +#define AM33XX_DPLL_REGM4XEN_SHIFT 11 +#define AM33XX_DPLL_REGM4XEN_MASK (1 << 11) + +/* Used by CM_CLKSEL_DPLL_PERIPH */ +#define AM33XX_DPLL_SD_DIV_SHIFT 24 +#define AM33XX_DPLL_SD_DIV_MASK (24, 31) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_SSC_ACK_SHIFT 13 +#define AM33XX_DPLL_SSC_ACK_MASK (1 << 13) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT 14 +#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_SSC_EN_SHIFT 12 +#define AM33XX_DPLL_SSC_EN_MASK (1 << 12) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x04 << 0) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12) + +/* + * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL, + * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, + * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL, + * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL, + * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL, + * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL, + * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL, + * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL, + * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL, + * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL, + * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL, + * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL, + * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL, + * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL, + * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL, + * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL, + * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL, + * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL, + * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL, + * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL, + * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL, + * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL, + * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL, + * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL, + * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL, + * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL, + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL, + * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL, + * CM_WKUP_WDT1_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL + */ +#define AM33XX_IDLEST_SHIFT 16 +#define AM33XX_IDLEST_MASK (0x3 << 16) +#define AM33XX_IDLEST_VAL 0x3 + +/* Used by CM_MAC_CLKSEL */ +#define AM33XX_MII_CLK_SEL_SHIFT 2 +#define AM33XX_MII_CLK_SEL_MASK (1 << 2) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR, + * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER + */ +#define AM33XX_MODFREQDIV_EXPONENT_SHIFT 8 +#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x10 << 8) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR, + * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER + */ +#define AM33XX_MODFREQDIV_MANTISSA_SHIFT 0 +#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x06 << 0) + +/* + * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL, + * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, + * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL, + * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL, + * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL, + * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL, + * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL, + * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL, + * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL, + * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL, + * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL, + * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL, + * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL, + * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL, + * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL, + * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL, + * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL, + * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL, + * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL, + * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL, + * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL, + * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL, + * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL, + * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL, + * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL, + * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL, + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL, + * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL, + * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, + * CM_GFX_GFX_CLKCTRL, CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, + * CM_CEFUSE_CEFUSE_CLKCTRL + */ +#define AM33XX_MODULEMODE_SHIFT 0 +#define AM33XX_MODULEMODE_MASK (0x3 << 0) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT 30 +#define AM33XX_OPTCLK_DEBUG_CLKA_MASK (1 << 30) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT 19 +#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK (1 << 19) + +/* Used by CM_WKUP_GPIO0_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO1_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO2_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO3_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO4_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO5_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO6_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK (1 << 18) + +/* + * Used by CM_MPU_MPU_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, CM_PER_PRUSS_CLKCTRL, + * CM_PER_IEEE5000_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MLB_CLKCTRL, + * CM_PER_MSTR_EXPS_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL, + * CM_PER_SPARE_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL, + * CM_PER_TPTC2_CLKCTRL, CM_PER_USB0_CLKCTRL, CM_WKUP_DEBUGSS_CLKCTRL, + * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL + */ +#define AM33XX_STBYST_SHIFT 18 +#define AM33XX_STBYST_MASK (1 << 18) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_STM_PMD_CLKDIVSEL_SHIFT 27 +#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x29 << 27) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_STM_PMD_CLKSEL_SHIFT 22 +#define AM33XX_STM_PMD_CLKSEL_MASK (0x23 << 22) + +/* + * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP, + * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER + */ +#define AM33XX_ST_DPLL_CLK_SHIFT 0 +#define AM33XX_ST_DPLL_CLK_MASK (1 << 0) + +/* Used by CM_CLKDCOLDO_DPLL_PER */ +#define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT 8 +#define AM33XX_ST_DPLL_CLKDCOLDO_MASK (1 << 8) + +/* + * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER + */ +#define AM33XX_ST_DPLL_CLKOUT_SHIFT 9 +#define AM33XX_ST_DPLL_CLKOUT_MASK (1 << 9) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9) + +/* + * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP, + * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER + */ +#define AM33XX_ST_MN_BYPASS_SHIFT 8 +#define AM33XX_ST_MN_BYPASS_MASK (1 << 8) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT 24 +#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x26 << 24) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_TRC_PMD_CLKSEL_SHIFT 20 +#define AM33XX_TRC_PMD_CLKSEL_MASK (0x21 << 20) + +/* Used by CONTROL_SEC_CLK_CTRL */ +#define AM33XX_TIMER0_CLKSEL_MASK (0x3 << 4) +#endif diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a7bc096bd407..f24e3f7a2bbc 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -22,4 +22,15 @@ */ #define MAX_MODULE_READY_TIME 2000 +/* + * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for + * the PRCM to request that a module enter the inactive state in the + * case of OMAP2 & 3. In the case of OMAP4 this is the max duration + * in microseconds for the module to reach the inactive state from + * a functional state. + * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during + * kernel init. + */ +#define MAX_MODULE_DISABLE_TIME 5000 + #endif diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c new file mode 100644 index 000000000000..13f56eafef03 --- /dev/null +++ b/arch/arm/mach-omap2/cm33xx.c @@ -0,0 +1,313 @@ +/* + * AM33XX CM functions + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Reference taken from from OMAP4 cminst44xx.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <plat/common.h> + +#include "cm.h" +#include "cm33xx.h" +#include "cm-regbits-34xx.h" +#include "cm-regbits-33xx.h" +#include "prm33xx.h" + +/* + * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield: + * + * 0x0 func: Module is fully functional, including OCP + * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep + * abortion + * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if + * using separate functional clock + * 0x3 disabled: Module is disabled and cannot be accessed + * + */ +#define CLKCTRL_IDLEST_FUNCTIONAL 0x0 +#define CLKCTRL_IDLEST_INTRANSITION 0x1 +#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2 +#define CLKCTRL_IDLEST_DISABLED 0x3 + +/* Private functions */ + +/* Read a register in a CM instance */ +static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx) +{ + return __raw_readl(cm_base + inst + idx); +} + +/* Write into a register in a CM */ +static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx) +{ + __raw_writel(val, cm_base + inst + idx); +} + +/* Read-modify-write a register in CM */ +static inline u32 am33xx_cm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, idx); + v &= ~mask; + v |= bits; + am33xx_cm_write_reg(v, inst, idx); + + return v; +} + +static inline u32 am33xx_cm_set_reg_bits(u32 bits, s16 inst, s16 idx) +{ + return am33xx_cm_rmw_reg_bits(bits, bits, inst, idx); +} + +static inline u32 am33xx_cm_clear_reg_bits(u32 bits, s16 inst, s16 idx) +{ + return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx); +} + +static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, idx); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +/** + * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to + * bit 0. + */ +static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= AM33XX_IDLEST_MASK; + v >>= AM33XX_IDLEST_SHIFT; + return v; +} + +/** + * _is_module_ready - can module registers be accessed without causing an abort? + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either + * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise. + */ +static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs); + + return (v == CLKCTRL_IDLEST_FUNCTIONAL || + v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false; +} + +/** + * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield + * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted) + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * @c must be the unshifted value for CLKTRCTRL - i.e., this function + * will handle the shift itself. + */ +static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, cdoffs); + v &= ~AM33XX_CLKTRCTRL_MASK; + v |= c << AM33XX_CLKTRCTRL_SHIFT; + am33xx_cm_write_reg(v, inst, cdoffs); +} + +/* Public functions */ + +/** + * am33xx_cm_is_clkdm_in_hwsup - is a clockdomain in hwsup idle mode? + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Returns true if the clockdomain referred to by (@inst, @cdoffs) + * is in hardware-supervised idle mode, or 0 otherwise. + */ +bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, cdoffs); + v &= AM33XX_CLKTRCTRL_MASK; + v >>= AM33XX_CLKTRCTRL_SHIFT; + + return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? true : false; +} + +/** + * am33xx_cm_clkdm_enable_hwsup - put a clockdomain in hwsup-idle mode + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Put a clockdomain referred to by (@inst, @cdoffs) into + * hardware-supervised idle mode. No return value. + */ +void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs); +} + +/** + * am33xx_cm_clkdm_disable_hwsup - put a clockdomain in swsup-idle mode + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Put a clockdomain referred to by (@inst, @cdoffs) into + * software-supervised idle mode, i.e., controlled manually by the + * Linux OMAP clockdomain code. No return value. + */ +void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs); +} + +/** + * am33xx_cm_clkdm_force_sleep - try to put a clockdomain into idle + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Put a clockdomain referred to by (@inst, @cdoffs) into idle + * No return value. + */ +void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs); +} + +/** + * am33xx_cm_clkdm_force_wakeup - try to take a clockdomain out of idle + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Take a clockdomain referred to by (@inst, @cdoffs) out of idle, + * waking it up. No return value. + */ +void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs); +} + +/* + * + */ + +/** + * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Wait for the module IDLEST to be functional. If the idle state is in any + * the non functional state (trans, idle or disabled), module and thus the + * sysconfig cannot be accessed and will probably lead to an "imprecise + * external abort" + */ +int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + int i = 0; + + if (!clkctrl_offs) + return 0; + + omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs), + MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/** + * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled' + * state + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Wait for the module IDLEST to be disabled. Some PRCM transition, + * like reset assertion or parent clock de-activation must wait the + * module to be fully disabled. + */ +int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + int i = 0; + + if (!clkctrl_offs) + return 0; + + omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) == + CLKCTRL_IDLEST_DISABLED), + MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/** + * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL + * @mode: Module mode (SW or HW) + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * No return value. + */ +void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= ~AM33XX_MODULEMODE_MASK; + v |= mode << AM33XX_MODULEMODE_SHIFT; + am33xx_cm_write_reg(v, inst, clkctrl_offs); +} + +/** + * am33xx_cm_module_disable - Disable the module inside CLKCTRL + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * No return value. + */ +void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= ~AM33XX_MODULEMODE_MASK; + am33xx_cm_write_reg(v, inst, clkctrl_offs); +} diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h new file mode 100644 index 000000000000..5fa0b62e1a79 --- /dev/null +++ b/arch/arm/mach-omap2/cm33xx.h @@ -0,0 +1,420 @@ +/* + * AM33XX CM offset macros + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_33XX_H + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "common.h" + +#include "cm.h" +#include "cm-regbits-33xx.h" +#include "cm33xx.h" + +/* CM base address */ +#define AM33XX_CM_BASE 0x44e00000 + +#define AM33XX_CM_REGADDR(inst, reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_CM_BASE + (inst) + (reg)) + +/* CM instances */ +#define AM33XX_CM_PER_MOD 0x0000 +#define AM33XX_CM_WKUP_MOD 0x0400 +#define AM33XX_CM_DPLL_MOD 0x0500 +#define AM33XX_CM_MPU_MOD 0x0600 +#define AM33XX_CM_DEVICE_MOD 0x0700 +#define AM33XX_CM_RTC_MOD 0x0800 +#define AM33XX_CM_GFX_MOD 0x0900 +#define AM33XX_CM_CEFUSE_MOD 0x0A00 + +/* CM */ + +/* CM.PER_CM register offsets */ +#define AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_PER_L4LS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0000) +#define AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET 0x0004 +#define AM33XX_CM_PER_L3S_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0004) +#define AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET 0x0008 +#define AM33XX_CM_PER_L4FW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0008) +#define AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET 0x000c +#define AM33XX_CM_PER_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x000c) +#define AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET 0x0014 +#define AM33XX_CM_PER_CPGMAC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0014) +#define AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET 0x0018 +#define AM33XX_CM_PER_LCDC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0018) +#define AM33XX_CM_PER_USB0_CLKCTRL_OFFSET 0x001c +#define AM33XX_CM_PER_USB0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x001c) +#define AM33XX_CM_PER_MLB_CLKCTRL_OFFSET 0x0020 +#define AM33XX_CM_PER_MLB_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0020) +#define AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET 0x0024 +#define AM33XX_CM_PER_TPTC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0024) +#define AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET 0x0028 +#define AM33XX_CM_PER_EMIF_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0028) +#define AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET 0x002c +#define AM33XX_CM_PER_OCMCRAM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x002c) +#define AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET 0x0030 +#define AM33XX_CM_PER_GPMC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0030) +#define AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET 0x0034 +#define AM33XX_CM_PER_MCASP0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0034) +#define AM33XX_CM_PER_UART5_CLKCTRL_OFFSET 0x0038 +#define AM33XX_CM_PER_UART5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0038) +#define AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET 0x003c +#define AM33XX_CM_PER_MMC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x003c) +#define AM33XX_CM_PER_ELM_CLKCTRL_OFFSET 0x0040 +#define AM33XX_CM_PER_ELM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0040) +#define AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET 0x0044 +#define AM33XX_CM_PER_I2C2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0044) +#define AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET 0x0048 +#define AM33XX_CM_PER_I2C1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0048) +#define AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET 0x004c +#define AM33XX_CM_PER_SPI0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x004c) +#define AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET 0x0050 +#define AM33XX_CM_PER_SPI1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0050) +#define AM33XX_CM_PER_SPI2_CLKCTRL_OFFSET 0x0054 +#define AM33XX_CM_PER_SPI2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0054) +#define AM33XX_CM_PER_SPI3_CLKCTRL_OFFSET 0x0058 +#define AM33XX_CM_PER_SPI3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0058) +#define AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET 0x0060 +#define AM33XX_CM_PER_L4LS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0060) +#define AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET 0x0064 +#define AM33XX_CM_PER_L4FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0064) +#define AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET 0x0068 +#define AM33XX_CM_PER_MCASP1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0068) +#define AM33XX_CM_PER_UART1_CLKCTRL_OFFSET 0x006c +#define AM33XX_CM_PER_UART1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x006c) +#define AM33XX_CM_PER_UART2_CLKCTRL_OFFSET 0x0070 +#define AM33XX_CM_PER_UART2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0070) +#define AM33XX_CM_PER_UART3_CLKCTRL_OFFSET 0x0074 +#define AM33XX_CM_PER_UART3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0074) +#define AM33XX_CM_PER_UART4_CLKCTRL_OFFSET 0x0078 +#define AM33XX_CM_PER_UART4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0078) +#define AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET 0x007c +#define AM33XX_CM_PER_TIMER7_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x007c) +#define AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET 0x0080 +#define AM33XX_CM_PER_TIMER2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0080) +#define AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET 0x0084 +#define AM33XX_CM_PER_TIMER3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0084) +#define AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET 0x0088 +#define AM33XX_CM_PER_TIMER4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0088) +#define AM33XX_CM_PER_MCASP2_CLKCTRL_OFFSET 0x008c +#define AM33XX_CM_PER_MCASP2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x008c) +#define AM33XX_CM_PER_RNG_CLKCTRL_OFFSET 0x0090 +#define AM33XX_CM_PER_RNG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0090) +#define AM33XX_CM_PER_AES0_CLKCTRL_OFFSET 0x0094 +#define AM33XX_CM_PER_AES0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0094) +#define AM33XX_CM_PER_AES1_CLKCTRL_OFFSET 0x0098 +#define AM33XX_CM_PER_AES1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0098) +#define AM33XX_CM_PER_DES_CLKCTRL_OFFSET 0x009c +#define AM33XX_CM_PER_DES_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x009c) +#define AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET 0x00a0 +#define AM33XX_CM_PER_SHA0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a0) +#define AM33XX_CM_PER_PKA_CLKCTRL_OFFSET 0x00a4 +#define AM33XX_CM_PER_PKA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a4) +#define AM33XX_CM_PER_GPIO6_CLKCTRL_OFFSET 0x00a8 +#define AM33XX_CM_PER_GPIO6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a8) +#define AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET 0x00ac +#define AM33XX_CM_PER_GPIO1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ac) +#define AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET 0x00b0 +#define AM33XX_CM_PER_GPIO2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b0) +#define AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET 0x00b4 +#define AM33XX_CM_PER_GPIO3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b4) +#define AM33XX_CM_PER_GPIO4_CLKCTRL_OFFSET 0x00b8 +#define AM33XX_CM_PER_GPIO4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b8) +#define AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET 0x00bc +#define AM33XX_CM_PER_TPCC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00bc) +#define AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET 0x00c0 +#define AM33XX_CM_PER_DCAN0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c0) +#define AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET 0x00c4 +#define AM33XX_CM_PER_DCAN1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c4) +#define AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET 0x00cc +#define AM33XX_CM_PER_EPWMSS1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00cc) +#define AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET 0x00d0 +#define AM33XX_CM_PER_EMIF_FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d0) +#define AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET 0x00d4 +#define AM33XX_CM_PER_EPWMSS0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d4) +#define AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET 0x00d8 +#define AM33XX_CM_PER_EPWMSS2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d8) +#define AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET 0x00dc +#define AM33XX_CM_PER_L3_INSTR_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00dc) +#define AM33XX_CM_PER_L3_CLKCTRL_OFFSET 0x00e0 +#define AM33XX_CM_PER_L3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e0) +#define AM33XX_CM_PER_IEEE5000_CLKCTRL_OFFSET 0x00e4 +#define AM33XX_CM_PER_IEEE5000_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e4) +#define AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET 0x00e8 +#define AM33XX_CM_PER_PRUSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e8) +#define AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET 0x00ec +#define AM33XX_CM_PER_TIMER5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ec) +#define AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET 0x00f0 +#define AM33XX_CM_PER_TIMER6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f0) +#define AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET 0x00f4 +#define AM33XX_CM_PER_MMC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f4) +#define AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET 0x00f8 +#define AM33XX_CM_PER_MMC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f8) +#define AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET 0x00fc +#define AM33XX_CM_PER_TPTC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00fc) +#define AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET 0x0100 +#define AM33XX_CM_PER_TPTC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0100) +#define AM33XX_CM_PER_GPIO5_CLKCTRL_OFFSET 0x0104 +#define AM33XX_CM_PER_GPIO5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0104) +#define AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET 0x010c +#define AM33XX_CM_PER_SPINLOCK_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x010c) +#define AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET 0x0110 +#define AM33XX_CM_PER_MAILBOX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0110) +#define AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET 0x011c +#define AM33XX_CM_PER_L4HS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x011c) +#define AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET 0x0120 +#define AM33XX_CM_PER_L4HS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0120) +#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL_OFFSET 0x0124 +#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0124) +#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL_OFFSET 0x0128 +#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0128) +#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET 0x012c +#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x012c) +#define AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET 0x0130 +#define AM33XX_CM_PER_OCPWP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0130) +#define AM33XX_CM_PER_MAILBOX1_CLKCTRL_OFFSET 0x0134 +#define AM33XX_CM_PER_MAILBOX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0134) +#define AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET 0x0140 +#define AM33XX_CM_PER_PRUSS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0140) +#define AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET 0x0144 +#define AM33XX_CM_PER_CPSW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0144) +#define AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET 0x0148 +#define AM33XX_CM_PER_LCDC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0148) +#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET 0x014c +#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x014c) +#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET 0x0150 +#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0150) + +/* CM.WKUP_CM register offsets */ +#define AM33XX_CM_WKUP_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_WKUP_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0000) +#define AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET 0x0004 +#define AM33XX_CM_WKUP_CONTROL_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0004) +#define AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET 0x0008 +#define AM33XX_CM_WKUP_GPIO0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0008) +#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x000c +#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x000c) +#define AM33XX_CM_WKUP_TIMER0_CLKCTRL_OFFSET 0x0010 +#define AM33XX_CM_WKUP_TIMER0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0010) +#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET 0x0014 +#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0014) +#define AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET 0x0018 +#define AM33XX_CM_L3_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0018) +#define AM33XX_CM_AUTOIDLE_DPLL_MPU_OFFSET 0x001c +#define AM33XX_CM_AUTOIDLE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x001c) +#define AM33XX_CM_IDLEST_DPLL_MPU_OFFSET 0x0020 +#define AM33XX_CM_IDLEST_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0020) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0024 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0024) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x0028 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0028) +#define AM33XX_CM_CLKSEL_DPLL_MPU_OFFSET 0x002c +#define AM33XX_CM_CLKSEL_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x002c) +#define AM33XX_CM_AUTOIDLE_DPLL_DDR_OFFSET 0x0030 +#define AM33XX_CM_AUTOIDLE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0030) +#define AM33XX_CM_IDLEST_DPLL_DDR_OFFSET 0x0034 +#define AM33XX_CM_IDLEST_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0034) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET 0x0038 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0038) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET 0x003c +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x003c) +#define AM33XX_CM_CLKSEL_DPLL_DDR_OFFSET 0x0040 +#define AM33XX_CM_CLKSEL_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0040) +#define AM33XX_CM_AUTOIDLE_DPLL_DISP_OFFSET 0x0044 +#define AM33XX_CM_AUTOIDLE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0044) +#define AM33XX_CM_IDLEST_DPLL_DISP_OFFSET 0x0048 +#define AM33XX_CM_IDLEST_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0048) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP_OFFSET 0x004c +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x004c) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP_OFFSET 0x0050 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0050) +#define AM33XX_CM_CLKSEL_DPLL_DISP_OFFSET 0x0054 +#define AM33XX_CM_CLKSEL_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0054) +#define AM33XX_CM_AUTOIDLE_DPLL_CORE_OFFSET 0x0058 +#define AM33XX_CM_AUTOIDLE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0058) +#define AM33XX_CM_IDLEST_DPLL_CORE_OFFSET 0x005c +#define AM33XX_CM_IDLEST_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x005c) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0060 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0060) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x0064 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0064) +#define AM33XX_CM_CLKSEL_DPLL_CORE_OFFSET 0x0068 +#define AM33XX_CM_CLKSEL_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0068) +#define AM33XX_CM_AUTOIDLE_DPLL_PER_OFFSET 0x006c +#define AM33XX_CM_AUTOIDLE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x006c) +#define AM33XX_CM_IDLEST_DPLL_PER_OFFSET 0x0070 +#define AM33XX_CM_IDLEST_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0070) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0074 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0074) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x0078 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0078) +#define AM33XX_CM_CLKDCOLDO_DPLL_PER_OFFSET 0x007c +#define AM33XX_CM_CLKDCOLDO_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x007c) +#define AM33XX_CM_DIV_M4_DPLL_CORE_OFFSET 0x0080 +#define AM33XX_CM_DIV_M4_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0080) +#define AM33XX_CM_DIV_M5_DPLL_CORE_OFFSET 0x0084 +#define AM33XX_CM_DIV_M5_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0084) +#define AM33XX_CM_CLKMODE_DPLL_MPU_OFFSET 0x0088 +#define AM33XX_CM_CLKMODE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0088) +#define AM33XX_CM_CLKMODE_DPLL_PER_OFFSET 0x008c +#define AM33XX_CM_CLKMODE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x008c) +#define AM33XX_CM_CLKMODE_DPLL_CORE_OFFSET 0x0090 +#define AM33XX_CM_CLKMODE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0090) +#define AM33XX_CM_CLKMODE_DPLL_DDR_OFFSET 0x0094 +#define AM33XX_CM_CLKMODE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0094) +#define AM33XX_CM_CLKMODE_DPLL_DISP_OFFSET 0x0098 +#define AM33XX_CM_CLKMODE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0098) +#define AM33XX_CM_CLKSEL_DPLL_PERIPH_OFFSET 0x009c +#define AM33XX_CM_CLKSEL_DPLL_PERIPH AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x009c) +#define AM33XX_CM_DIV_M2_DPLL_DDR_OFFSET 0x00a0 +#define AM33XX_CM_DIV_M2_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a0) +#define AM33XX_CM_DIV_M2_DPLL_DISP_OFFSET 0x00a4 +#define AM33XX_CM_DIV_M2_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a4) +#define AM33XX_CM_DIV_M2_DPLL_MPU_OFFSET 0x00a8 +#define AM33XX_CM_DIV_M2_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a8) +#define AM33XX_CM_DIV_M2_DPLL_PER_OFFSET 0x00ac +#define AM33XX_CM_DIV_M2_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00ac) +#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET 0x00b0 +#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b0) +#define AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET 0x00b4 +#define AM33XX_CM_WKUP_UART0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b4) +#define AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET 0x00b8 +#define AM33XX_CM_WKUP_I2C0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b8) +#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET 0x00bc +#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00bc) +#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET 0x00c0 +#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c0) +#define AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x00c4 +#define AM33XX_CM_WKUP_TIMER1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c4) +#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET 0x00c8 +#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c8) +#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET 0x00cc +#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00cc) +#define AM33XX_CM_WKUP_WDT0_CLKCTRL_OFFSET 0x00d0 +#define AM33XX_CM_WKUP_WDT0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d0) +#define AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x00d4 +#define AM33XX_CM_WKUP_WDT1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d4) +#define AM33XX_CM_DIV_M6_DPLL_CORE_OFFSET 0x00d8 +#define AM33XX_CM_DIV_M6_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d8) + +/* CM.DPLL_CM register offsets */ +#define AM33XX_CLKSEL_TIMER7_CLK_OFFSET 0x0004 +#define AM33XX_CLKSEL_TIMER7_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0004) +#define AM33XX_CLKSEL_TIMER2_CLK_OFFSET 0x0008 +#define AM33XX_CLKSEL_TIMER2_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0008) +#define AM33XX_CLKSEL_TIMER3_CLK_OFFSET 0x000c +#define AM33XX_CLKSEL_TIMER3_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x000c) +#define AM33XX_CLKSEL_TIMER4_CLK_OFFSET 0x0010 +#define AM33XX_CLKSEL_TIMER4_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0010) +#define AM33XX_CM_MAC_CLKSEL_OFFSET 0x0014 +#define AM33XX_CM_MAC_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0014) +#define AM33XX_CLKSEL_TIMER5_CLK_OFFSET 0x0018 +#define AM33XX_CLKSEL_TIMER5_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0018) +#define AM33XX_CLKSEL_TIMER6_CLK_OFFSET 0x001c +#define AM33XX_CLKSEL_TIMER6_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x001c) +#define AM33XX_CM_CPTS_RFT_CLKSEL_OFFSET 0x0020 +#define AM33XX_CM_CPTS_RFT_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0020) +#define AM33XX_CLKSEL_TIMER1MS_CLK_OFFSET 0x0028 +#define AM33XX_CLKSEL_TIMER1MS_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0028) +#define AM33XX_CLKSEL_GFX_FCLK_OFFSET 0x002c +#define AM33XX_CLKSEL_GFX_FCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x002c) +#define AM33XX_CLKSEL_PRUSS_OCP_CLK_OFFSET 0x0030 +#define AM33XX_CLKSEL_PRUSS_OCP_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0030) +#define AM33XX_CLKSEL_LCDC_PIXEL_CLK_OFFSET 0x0034 +#define AM33XX_CLKSEL_LCDC_PIXEL_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0034) +#define AM33XX_CLKSEL_WDT1_CLK_OFFSET 0x0038 +#define AM33XX_CLKSEL_WDT1_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0038) +#define AM33XX_CLKSEL_GPIO0_DBCLK_OFFSET 0x003c +#define AM33XX_CLKSEL_GPIO0_DBCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x003c) + +/* CM.MPU_CM register offsets */ +#define AM33XX_CM_MPU_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_MPU_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0000) +#define AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET 0x0004 +#define AM33XX_CM_MPU_MPU_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0004) + +/* CM.DEVICE_CM register offsets */ +#define AM33XX_CM_CLKOUT_CTRL_OFFSET 0x0000 +#define AM33XX_CM_CLKOUT_CTRL AM33XX_CM_REGADDR(AM33XX_CM_DEVICE_MOD, 0x0000) + +/* CM.RTC_CM register offsets */ +#define AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET 0x0000 +#define AM33XX_CM_RTC_RTC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0000) +#define AM33XX_CM_RTC_CLKSTCTRL_OFFSET 0x0004 +#define AM33XX_CM_RTC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0004) + +/* CM.GFX_CM register offsets */ +#define AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_GFX_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0000) +#define AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET 0x0004 +#define AM33XX_CM_GFX_GFX_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0004) +#define AM33XX_CM_GFX_BITBLT_CLKCTRL_OFFSET 0x0008 +#define AM33XX_CM_GFX_BITBLT_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0008) +#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET 0x000c +#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1 AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x000c) +#define AM33XX_CM_GFX_MMUCFG_CLKCTRL_OFFSET 0x0010 +#define AM33XX_CM_GFX_MMUCFG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0010) +#define AM33XX_CM_GFX_MMUDATA_CLKCTRL_OFFSET 0x0014 +#define AM33XX_CM_GFX_MMUDATA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0014) + +/* CM.CEFUSE_CM register offsets */ +#define AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_CEFUSE_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0000) +#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020 +#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020) + + +extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs); + +#ifdef CONFIG_SOC_AM33XX +extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, + u16 clkctrl_offs); +#else +static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} +static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} +static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} +static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 8c86d294b1a3..1a39945d9ff8 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), - MAX_MODULE_READY_TIME, i); + MAX_MODULE_DISABLE_TIME, i); - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY; } /** diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index be9dfd1abe60..5d99c1b2cb48 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -120,6 +120,7 @@ extern void omap2_init_common_infrastructure(void); extern struct sys_timer omap2_timer; extern struct sys_timer omap3_timer; extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap3_am33xx_timer; extern struct sys_timer omap4_timer; void omap2420_init_early(void); @@ -128,8 +129,10 @@ void omap3430_init_early(void); void omap35xx_init_early(void); void omap3630_init_early(void); void omap3_init_early(void); /* Do not use this one */ +void am33xx_init_early(void); void am35xx_init_early(void); void ti81xx_init_early(void); +void am33xx_init_early(void); void omap4430_init_early(void); void omap3_init_late(void); /* Do not use this one */ void omap4430_init_late(void); diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 08e674bb0417..3223b81e7532 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -241,6 +241,49 @@ void omap3_ctrl_write_boot_mode(u8 bootmode) #endif +/** + * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor + * @bootaddr: physical address of the boot loader + * + * Set boot address for the boot loader of a supported processor + * when a power ON sequence occurs. + */ +void omap_ctrl_write_dsp_boot_addr(u32 bootaddr) +{ + u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR : + cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR : + cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : + 0; + + if (!offset) { + pr_err("%s: unsupported omap type\n", __func__); + return; + } + + omap_ctrl_writel(bootaddr, offset); +} + +/** + * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor + * @bootmode: 8-bit value to pass to some boot code + * + * Sets boot mode for the boot loader of a supported processor + * when a power ON sequence occurs. + */ +void omap_ctrl_write_dsp_boot_mode(u8 bootmode) +{ + u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD : + cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD : + 0; + + if (!offset) { + pr_err("%s: unsupported omap type\n", __func__); + return; + } + + omap_ctrl_writel(bootmode, offset); +} + #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) /* * Clears the scratchpad contents in case of cold boot- diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a406fd045ce1..5baf305386e9 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -21,6 +21,8 @@ #include <mach/ctrl_module_pad_core_44xx.h> #include <mach/ctrl_module_pad_wkup_44xx.h> +#include <plat/am33xx.h> + #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) @@ -28,6 +30,8 @@ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define AM33XX_CTRL_REGADDR(reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg)) #else #define OMAP242X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) @@ -35,6 +39,8 @@ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define AM33XX_CTRL_REGADDR(reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg)) #endif /* __ASSEMBLY__ */ /* @@ -312,15 +318,15 @@ OMAP343X_SCRATCHPAD + reg) /* AM35XX_CONTROL_IPSS_CLK_CTRL bits */ -#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 -#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 -#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 -#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 -#define AM35XX_USBOTG_FCLK_SHIFT 8 -#define AM35XX_CPGMAC_FCLK_SHIFT 9 -#define AM35XX_VPFE_FCLK_SHIFT 10 - -/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/ +#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 +#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 +#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 +#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 +#define AM35XX_USBOTG_FCLK_SHIFT 8 +#define AM35XX_CPGMAC_FCLK_SHIFT 9 +#define AM35XX_VPFE_FCLK_SHIFT 10 + +/* AM35XX CONTROL_LVL_INTR_CLEAR bits */ #define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0) #define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1) #define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2) @@ -330,21 +336,22 @@ #define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6) #define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7) -/*AM35XX CONTROL_IP_SW_RESET bits*/ +/* AM35XX CONTROL_IP_SW_RESET bits */ #define AM35XX_USBOTGSS_SW_RST BIT(0) #define AM35XX_CPGMACSS_SW_RST BIT(1) #define AM35XX_VPFE_VBUSP_SW_RST BIT(2) #define AM35XX_HECC_SW_RST BIT(3) #define AM35XX_VPFE_PCLK_SW_RST BIT(4) -/* - * CONTROL AM33XX STATUS register - */ +/* AM33XX CONTROL_STATUS register */ #define AM33XX_CONTROL_STATUS 0x040 +#define AM33XX_CONTROL_SEC_CLK_CTRL 0x1bc -/* - * CONTROL OMAP STATUS register to identify OMAP3 features - */ +/* AM33XX CONTROL_STATUS bitfields (partial) */ +#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22 +#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22) + +/* CONTROL OMAP STATUS register to identify OMAP3 features */ #define OMAP3_CONTROL_OMAP_STATUS 0x044c #define OMAP3_SGX_SHIFT 13 @@ -397,6 +404,8 @@ extern u32 omap3_arm_context[128]; extern void omap3_control_save_context(void); extern void omap3_control_restore_context(void); extern void omap3_ctrl_write_boot_mode(u8 bootmode); +extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); +extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); #else diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 54d49ddb9b81..5fb47a14f4ba 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -271,9 +271,9 @@ static struct platform_device *create_simple_dss_pdev(const char *pdev_name, goto err; } - r = omap_device_register(pdev); + r = platform_device_add(pdev); if (r) { - pr_err("Could not register omap_device for %s\n", pdev_name); + pr_err("Could not register platform_device for %s\n", pdev_name); goto err; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 845309f146fe..a636ebc16b39 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -20,6 +20,10 @@ #include <linux/module.h> #include <linux/platform_device.h> + +#include <asm/memblock.h> + +#include "control.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS @@ -43,6 +47,9 @@ static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { .dsp_cm_read = omap2_cm_read_mod_reg, .dsp_cm_write = omap2_cm_write_mod_reg, .dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits, + + .set_bootaddr = omap_ctrl_write_dsp_boot_addr, + .set_bootmode = omap_ctrl_write_dsp_boot_mode, }; static phys_addr_t omap_dsp_phys_mempool_base; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0389b3264abe..00486a8564fd 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -247,6 +247,17 @@ void __init omap3xxx_check_features(void) omap_features |= OMAP3_HAS_SDRC; /* + * am35x fixups: + * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as + * reserved and therefore return 0 when read. Unfortunately, + * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to + * mean that a feature is present even though it isn't so clear + * the incorrectly set feature bits. + */ + if (soc_is_am35xx()) + omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP); + + /* * TODO: Get additional info (where applicable) * e.g. Size of L2 cache. */ diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h index 2f7ac70a20d8..01970824e0e5 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h @@ -42,6 +42,7 @@ #define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268 #define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4 #define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300 +#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318 #define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320 diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index cdfc2a1f0e75..d7f844a99a7b 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -72,6 +72,8 @@ omap_uart_lsr: .word 0 beq 82f @ configure UART2 cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different beq 83f @ configure UART3 + cmp \rp, #AM33XXUART1 @ AM33XX UART offsets different + beq 84f @ configure UART1 cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART @@ -100,7 +102,9 @@ omap_uart_lsr: .word 0 b 98f 83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE) b 98f - +84: ldr \rp, =AM33XX_UART1_BASE + and \rp, \rp, #0x00ffffff + b 97f 95: ldr \rp, =ZOOM_UART_BASE str \rp, [\tmp, #0] @ omap_uart_phys ldr \rp, =ZOOM_UART_VIRT @@ -109,6 +113,17 @@ omap_uart_lsr: .word 0 str \rp, [\tmp, #8] @ omap_uart_lsr b 10b + /* AM33XX: Store both phys and virt address for the uart */ +97: add \rp, \rp, #0x44000000 @ phys base + str \rp, [\tmp, #0] @ omap_uart_phys + sub \rp, \rp, #0x44000000 @ phys base + add \rp, \rp, #0xf9000000 @ virt base + str \rp, [\tmp, #4] @ omap_uart_virt + mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) + str \rp, [\tmp, #8] @ omap_uart_lsr + + b 10b + /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0x48000000 @ phys base str \rp, [\tmp, #0] @ omap_uart_phys diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 8d014ba04abc..cb6c11cd8df9 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -477,6 +477,19 @@ void __init ti81xx_init_late(void) } #endif +#ifdef CONFIG_SOC_AM33XX +void __init am33xx_init_early(void) +{ + omap2_set_globals_am33xx(); + omap3xxx_check_revision(); + ti81xx_check_features(); + omap_common_init_early(); + am33xx_voltagedomains_init(); + am33xx_powerdomains_init(); + am33xx_clockdomains_init(); +} +#endif + #ifdef CONFIG_ARCH_OMAP4 void __init omap4430_init_early(void) { diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index fdc4303be563..d5b34febd82d 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) ct->chip.irq_ack = omap_mask_ack_irq; ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE; ct->regs.enable = INTC_MIR_CLEAR0; ct->regs.disable = INTC_MIR_SET0; @@ -279,7 +280,7 @@ int __init omap_intc_of_init(struct device_node *node, return 0; } -#ifdef CONFIG_ARCH_OMAP3 +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; void omap_intc_save_context(void) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 80e55c5c9998..9fe6829f4c16 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -41,6 +41,7 @@ #include "control.h" #include "mux.h" #include "prm.h" +#include "common.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca @@ -217,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init -omap_mux_get_by_name(const char *muxname, +int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 69fe060a0b75..471e62a74a16 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -59,6 +59,7 @@ #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN #define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ #define OMAP_PACKAGE_MASK 0xffff @@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads); */ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state); +int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux); #else +static inline int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux) +{ + return 0; +} + static inline int omap_mux_init_gpio(int gpio, int val) { return 0; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index bf86f7e8f91f..f97f0624bca0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -166,6 +166,31 @@ */ #define LINKS_PER_OCP_IF 2 +/** + * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations + * @enable_module: function to enable a module (via MODULEMODE) + * @disable_module: function to disable a module (via MODULEMODE) + * + * XXX Eventually this functionality will be hidden inside the PRM/CM + * device drivers. Until then, this should avoid huge blocks of cpu_is_*() + * conditionals in this code. + */ +struct omap_hwmod_soc_ops { + void (*enable_module)(struct omap_hwmod *oh); + int (*disable_module)(struct omap_hwmod *oh); + int (*wait_target_ready)(struct omap_hwmod *oh); + int (*assert_hardreset)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*deassert_hardreset)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*is_hardreset_asserted)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*init_clkdm)(struct omap_hwmod *oh); +}; + +/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ +static struct omap_hwmod_soc_ops soc_ops; + /* omap_hwmod_list contains all registered struct omap_hwmods */ static LIST_HEAD(omap_hwmod_list); @@ -186,6 +211,9 @@ static struct omap_hwmod_link *linkspace; */ static unsigned short free_ls, max_ls, ls_supp; +/* inited: set to true once the hwmod code is initialized */ +static bool inited; + /* Private functions */ /** @@ -530,7 +558,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); + _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); /* XXX test pwrdm_get_wken for this hwmod's subsystem */ @@ -771,23 +799,19 @@ static void _disable_optional_clocks(struct omap_hwmod *oh) } /** - * _enable_module - enable CLKCTRL modulemode on OMAP4 + * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * * Enables the PRCM module mode related to the hwmod @oh. * No return value. */ -static void _enable_module(struct omap_hwmod *oh) +static void _omap4_enable_module(struct omap_hwmod *oh) { - /* The module mode does not exist prior OMAP4 */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return; - if (!oh->clkdm || !oh->prcm.omap4.modulemode) return; - pr_debug("omap_hwmod: %s: _enable_module: %d\n", - oh->name, oh->prcm.omap4.modulemode); + pr_debug("omap_hwmod: %s: %s: %d\n", + oh->name, __func__, oh->prcm.omap4.modulemode); omap4_cminst_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->prcm_partition, @@ -807,10 +831,7 @@ static void _enable_module(struct omap_hwmod *oh) */ static int _omap4_wait_target_disable(struct omap_hwmod *oh) { - if (!cpu_is_omap44xx()) - return 0; - - if (!oh) + if (!oh || !oh->clkdm) return -EINVAL; if (oh->_int_flags & _HWMOD_NO_MPU_PORT) @@ -1285,24 +1306,20 @@ static struct omap_hwmod *_lookup(const char *name) return oh; } + /** * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod * @oh: struct omap_hwmod * * * Convert a clockdomain name stored in a struct omap_hwmod into a * clockdomain pointer, and save it into the struct omap_hwmod. - * return -EINVAL if clkdm_name does not exist or if the lookup failed. + * Return -EINVAL if the clkdm_name lookup failed. */ static int _init_clkdm(struct omap_hwmod *oh) { - if (cpu_is_omap24xx() || cpu_is_omap34xx()) + if (!oh->clkdm_name) return 0; - if (!oh->clkdm_name) { - pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name); - return -EINVAL; - } - oh->clkdm = clkdm_lookup(oh->clkdm_name); if (!oh->clkdm) { pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n", @@ -1338,7 +1355,8 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) ret |= _init_main_clk(oh); ret |= _init_interface_clks(oh); ret |= _init_opt_clks(oh); - ret |= _init_clkdm(oh); + if (soc_ops.init_clkdm) + ret |= soc_ops.init_clkdm(oh); if (!ret) oh->_state = _HWMOD_STATE_CLKS_INITED; @@ -1349,53 +1367,6 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) } /** - * _wait_target_ready - wait for a module to leave slave idle - * @oh: struct omap_hwmod * - * - * Wait for a module @oh to leave slave idle. Returns 0 if the module - * does not have an IDLEST bit or if the module successfully leaves - * slave idle; otherwise, pass along the return value of the - * appropriate *_cm*_wait_module_ready() function. - */ -static int _wait_target_ready(struct omap_hwmod *oh) -{ - struct omap_hwmod_ocp_if *os; - int ret; - - if (!oh) - return -EINVAL; - - if (oh->flags & HWMOD_NO_IDLEST) - return 0; - - os = _find_mpu_rt_port(oh); - if (!os) - return 0; - - /* XXX check module SIDLEMODE */ - - /* XXX check clock enable states */ - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, - oh->prcm.omap2.idlest_reg_id, - oh->prcm.omap2.idlest_idle_bit); - } else if (cpu_is_omap44xx()) { - if (!oh->clkdm) - return -EINVAL; - - ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); - } else { - BUG(); - }; - - return ret; -} - -/** * _lookup_hardreset - fill register bit info for this hwmod/reset line * @oh: struct omap_hwmod * * @name: name of the reset line in the context of this hwmod @@ -1431,32 +1402,31 @@ static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name, * @oh: struct omap_hwmod * * @name: name of the reset line to lookup and assert * - * Some IP like dsp, ipu or iva contain processor that require - * an HW reset line to be assert / deassert in order to enable fully - * the IP. + * Some IP like dsp, ipu or iva contain processor that require an HW + * reset line to be assert / deassert in order to enable fully the IP. + * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of + * asserting the hardreset line on the currently-booted SoC, or passes + * along the return value from _lookup_hardreset() or the SoC's + * assert_hardreset code. */ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret; + u8 ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.assert_hardreset) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, - ohri.rst_shift); - else if (cpu_is_omap44xx()) - return omap4_prminst_assert_hardreset(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - else - return -EINVAL; + ret = soc_ops.assert_hardreset(oh, &ohri); + + return ret; } /** @@ -1465,38 +1435,29 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) * @oh: struct omap_hwmod * * @name: name of the reset line to look up and deassert * - * Some IP like dsp, ipu or iva contain processor that require - * an HW reset line to be assert / deassert in order to enable fully - * the IP. + * Some IP like dsp, ipu or iva contain processor that require an HW + * reset line to be assert / deassert in order to enable fully the IP. + * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of + * deasserting the hardreset line on the currently-booted SoC, or passes + * along the return value from _lookup_hardreset() or the SoC's + * deassert_hardreset code. */ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - int ret; + int ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.deassert_hardreset) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - ret = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, - ohri.rst_shift, - ohri.st_shift); - } else if (cpu_is_omap44xx()) { - if (ohri.st_shift) - pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", - oh->name, name); - ret = omap4_prminst_deassert_hardreset(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - } else { - return -EINVAL; - } - + ret = soc_ops.deassert_hardreset(oh, &ohri); if (ret == -EBUSY) pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); @@ -1509,31 +1470,28 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) * @oh: struct omap_hwmod * * @name: name of the reset line to look up and read * - * Return the state of the reset line. + * Return the state of the reset line. Returns -EINVAL if @oh is + * null, -ENOSYS if we have no way of reading the hardreset line + * status on the currently-booted SoC, or passes along the return + * value from _lookup_hardreset() or the SoC's is_hardreset_asserted + * code. */ static int _read_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret; + u8 ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.is_hardreset_asserted) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, - ohri.st_shift); - } else if (cpu_is_omap44xx()) { - return omap4_prminst_is_hardreset_asserted(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - } else { - return -EINVAL; - } + return soc_ops.is_hardreset_asserted(oh, &ohri); } /** @@ -1571,10 +1529,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh) { int v; - /* The module mode does not exist prior OMAP4 */ - if (!cpu_is_omap44xx()) - return -EINVAL; - if (!oh->clkdm || !oh->prcm.omap4.modulemode) return -EINVAL; @@ -1814,9 +1768,11 @@ static int _enable(struct omap_hwmod *oh) } _enable_clocks(oh); - _enable_module(oh); + if (soc_ops.enable_module) + soc_ops.enable_module(oh); - r = _wait_target_ready(oh); + r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) : + -EINVAL; if (!r) { /* * Set the clockdomain to HW_AUTO only if the target is ready, @@ -1870,7 +1826,8 @@ static int _idle(struct omap_hwmod *oh) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); /* * The module must be in idle mode before disabling any parents @@ -1975,7 +1932,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state == _HWMOD_STATE_ENABLED) { _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); _disable_clocks(oh); if (oh->clkdm) clkdm_hwmod_disable(oh->clkdm, oh); @@ -2431,6 +2389,194 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) return 0; } +/* Static functions intended only for use in soc_ops field function pointers */ + +/** + * _omap2_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap2_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ + + return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); +} + +/** + * _omap4_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap4_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh || !oh->clkdm) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status */ + + return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** + * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to assert hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_assert_hardreset() with parameters extracted from + * the hwmod @oh and the hardreset line data @ohri. Only intended for + * use as an soc_ops function pointer. Passes along the return value + * from omap2_prm_assert_hardreset(). XXX This function is scheduled + * for removal when the PRM code is moved into drivers/. + */ +static int _omap2_assert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, + ohri->rst_shift); +} + +/** + * _omap2_deassert_hardreset - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to deassert hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_deassert_hardreset() with parameters extracted from + * the hwmod @oh and the hardreset line data @ohri. Only intended for + * use as an soc_ops function pointer. Passes along the return value + * from omap2_prm_deassert_hardreset(). XXX This function is + * scheduled for removal when the PRM code is moved into drivers/. + */ +static int _omap2_deassert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, + ohri->rst_shift, + ohri->st_shift); +} + +/** + * _omap2_is_hardreset_asserted - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to test hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_is_hardreset_asserted() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap2_prm_is_hardreset_asserted(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, + ohri->st_shift); +} + +/** + * _omap4_assert_hardreset - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to assert hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_assert_hardreset() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap4_prminst_assert_hardreset(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap4_assert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + return omap4_prminst_assert_hardreset(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + +/** + * _omap4_deassert_hardreset - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to deassert hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_deassert_hardreset() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap4_prminst_deassert_hardreset(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap4_deassert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + if (ohri->st_shift) + pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", + oh->name, ohri->name); + return omap4_prminst_deassert_hardreset(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + +/** + * _omap4_is_hardreset_asserted - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to test hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_is_hardreset_asserted() with parameters + * extracted from the hwmod @oh and the hardreset line data @ohri. + * Only intended for use as an soc_ops function pointer. Passes along + * the return value from omap4_prminst_is_hardreset_asserted(). XXX + * This function is scheduled for removal when the PRM code is moved + * into drivers/. + */ +static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + return omap4_prminst_is_hardreset_asserted(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + /* Public functions */ u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) @@ -2563,12 +2709,18 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), * * Intended to be called early in boot before the clock framework is * initialized. If @ois is not null, will register all omap_hwmods - * listed in @ois that are valid for this chip. Returns 0. + * listed in @ois that are valid for this chip. Returns -EINVAL if + * omap_hwmod_init() hasn't been called before calling this function, + * -ENOMEM if the link memory area can't be allocated, or 0 upon + * success. */ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) { int r, i; + if (!inited) + return -EINVAL; + if (!ois) return 0; @@ -3401,3 +3553,32 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) return 0; } + +/** + * omap_hwmod_init - initialize the hwmod code + * + * Sets up some function pointers needed by the hwmod code to operate on the + * currently-booted SoC. Intended to be called once during kernel init + * before any hwmods are registered. No return value. + */ +void __init omap_hwmod_init(void) +{ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + soc_ops.wait_target_ready = _omap2_wait_target_ready; + soc_ops.assert_hardreset = _omap2_assert_hardreset; + soc_ops.deassert_hardreset = _omap2_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; + } else if (cpu_is_omap44xx()) { + soc_ops.enable_module = _omap4_enable_module; + soc_ops.disable_module = _omap4_disable_module; + soc_ops.wait_target_ready = _omap4_wait_target_ready; + soc_ops.assert_hardreset = _omap4_assert_hardreset; + soc_ops.deassert_hardreset = _omap4_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; + soc_ops.init_clkdm = _init_clkdm; + } else { + WARN(1, "omap_hwmod: unknown SoC type\n"); + } + + inited = true; +} diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a7640d1b215e..50cfab61b0e2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -192,6 +192,11 @@ static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = { .name = "mcbsp", }; +static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "func_96m_ck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { { .name = "tx", .irq = 59 }, @@ -214,6 +219,8 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp2 */ @@ -238,6 +245,8 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = { @@ -585,5 +594,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { int __init omap2420_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4d7264981230..58b5bc196d32 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -296,6 +296,11 @@ static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = { .rev = MCBSP_CONFIG_TYPE2, }; +static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "func_96m_ck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { { .name = "tx", .irq = 59 }, @@ -320,6 +325,8 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp2 */ @@ -345,6 +352,8 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp3 */ @@ -370,6 +379,8 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp4 */ @@ -401,6 +412,8 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp5 */ @@ -432,6 +445,8 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* MMC/SD/SDIO common */ @@ -938,5 +953,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { int __init omap2430_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 0ea53bcc7d18..6491e057d9ce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1066,6 +1066,17 @@ static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = { .rev = MCBSP_CONFIG_TYPE3, }; +/* McBSP functional clock mapping */ +static struct omap_hwmod_opt_clk mcbsp15_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "core_96m_fck" }, +}; + +static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "per_96m_fck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { { .name = "common", .irq = 16 }, @@ -1089,6 +1100,8 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp15_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks), }; /* mcbsp2 */ @@ -1118,6 +1131,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), .dev_attr = &omap34xx_mcbsp2_dev_attr, }; @@ -1148,6 +1163,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), .dev_attr = &omap34xx_mcbsp3_dev_attr, }; @@ -1180,6 +1197,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), }; /* mcbsp5 */ @@ -1211,6 +1230,8 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT, }, }, + .opt_clks = mcbsp15_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks), }; /* 'mcbsp sidetone' class */ @@ -3275,6 +3296,8 @@ int __init omap3xxx_hwmod_init(void) struct omap_hwmod_ocp_if **h = NULL; unsigned int rev; + omap_hwmod_init(); + /* Register hwmod links common to all OMAP3 */ r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs); if (r < 0) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index ebf9657460dd..1b1d04141c3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .name = "dss_hdmi", .class = &omap44xx_hdmi_hwmod_class, .clkdm_name = "l3_dss_clkdm", + /* + * HDMI audio requires to use no-idle mode. Hence, + * set idle mode by software. + */ + .flags = HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, .main_clk = "dss_48mhz_clk", @@ -2540,14 +2544,12 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = { static struct omap_hwmod omap44xx_cm_core_aon_hwmod = { .name = "cm_core_aon", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "cm_clkdm", }; /* cm_core */ static struct omap_hwmod omap44xx_cm_core_hwmod = { .name = "cm_core", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "cm_clkdm", }; /* prm */ @@ -2564,7 +2566,6 @@ static struct omap_hwmod_rst_info omap44xx_prm_resets[] = { static struct omap_hwmod omap44xx_prm_hwmod = { .name = "prm", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "prm_clkdm", .mpu_irqs = omap44xx_prm_irqs, .rst_lines = omap44xx_prm_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_prm_resets), @@ -6138,6 +6139,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { int __init omap44xx_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index a05a62f9ee5b..acc216491b8a 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s seen by %s %s at address %x\n", + pr_err("%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", address); + WARN_ON(1); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 4c90477e6f82..d52651a05daa 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode) devconf2 &= ~CONF2_OTGMODE; switch (musb_mode) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD case MUSB_HOST: /* Force VBUS valid, ID = 0 */ devconf2 |= CONF2_FORCE_HOST; break; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ devconf2 |= CONF2_FORCE_DEVICE; break; -#endif -#ifdef CONFIG_USB_MUSB_OTG case MUSB_OTG: /* Don't override the VBUS/ID comparators */ devconf2 |= CONF2_NO_OVERRIDE; break; -#endif default: pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a34023d0ca7c..3a595e899724 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -724,6 +724,7 @@ int __init omap3_pm_init(void) ret = request_irq(omap_prcm_event_to_irq("io"), _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", omap3_pm_init); + enable_irq(omap_prcm_event_to_irq("io")); if (ret) { pr_err("pm: Failed to request pm_io irq\n"); diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 8f88d65c46ea..a8a95184243d 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -67,9 +67,9 @@ /* * Maximum number of clockdomains that can be associated with a powerdomain. - * CORE powerdomain on OMAP4 is the worst case + * PER powerdomain on AM33XX is the worst case */ -#define PWRDM_MAX_CLKDMS 9 +#define PWRDM_MAX_CLKDMS 11 /* XXX A completely arbitrary number. What is reasonable here? */ #define PWRDM_TRANSITION_BAILOUT 100000 @@ -92,6 +92,15 @@ struct powerdomain; * @pwrdm_clkdms: Clockdomains in this powerdomain * @node: list_head linking all powerdomains * @voltdm_node: list_head linking all powerdomains in a voltagedomain + * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs + * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs + * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield + * in @pwrstctrl_offs + * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs + * @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs + * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs + * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield + * in @pwrstctrl_offs * @state: * @state_counter: * @timer: @@ -121,6 +130,14 @@ struct powerdomain { unsigned ret_logic_off_counter; unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS]; + const u8 pwrstctrl_offs; + const u8 pwrstst_offs; + const u32 logicretstate_mask; + const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS]; + const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS]; + const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS]; + const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS]; + #ifdef CONFIG_PM_DEBUG s64 timer; s64 state_timer[PWRDM_MAX_PWRSTS]; @@ -222,10 +239,12 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); extern void omap242x_powerdomains_init(void); extern void omap243x_powerdomains_init(void); extern void omap3xxx_powerdomains_init(void); +extern void am33xx_powerdomains_init(void); extern void omap44xx_powerdomains_init(void); extern struct pwrdm_ops omap2_pwrdm_operations; extern struct pwrdm_ops omap3_pwrdm_operations; +extern struct pwrdm_ops am33xx_pwrdm_operations; extern struct pwrdm_ops omap4_pwrdm_operations; /* Common Internal functions used across OMAP rev's */ diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c new file mode 100644 index 000000000000..67c5663899b6 --- /dev/null +++ b/arch/arm/mach-omap2/powerdomain33xx.c @@ -0,0 +1,229 @@ +/* + * AM33XX Powerdomain control + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak + * <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/delay.h> + +#include <plat/prcm.h> + +#include "powerdomain.h" +#include "prm33xx.h" +#include "prm-regbits-33xx.h" + + +static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= OMAP_POWERSTATE_MASK; + v >>= OMAP_POWERSTATE_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= OMAP_POWERSTATEST_MASK; + v >>= OMAP_POWERSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LASTPOWERSTATEENTERED_MASK; + v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; + + return v; +} + +static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, + (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK, + AM33XX_LASTPOWERSTATEENTERED_MASK, + pwrdm->prcm_offs, pwrdm->pwrstst_offs); + return 0; +} + +static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) +{ + u32 m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LOGICSTATEST_MASK; + v >>= AM33XX_LOGICSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm) +{ + u32 v, m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_on_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_ret_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_pwrst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_retst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ + + /* XXX Is this udelay() value meaningful? */ + while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs) + & OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); + return -EAGAIN; + } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + + return 0; +} + +struct pwrdm_ops am33xx_pwrdm_operations = { + .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, + .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, + .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, + .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, + .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, + .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst, + .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange, + .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst, + .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst, + .pwrdm_wait_transition = am33xx_pwrdm_wait_transition, +}; diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c new file mode 100644 index 000000000000..869adb82569e --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains33xx_data.c @@ -0,0 +1,185 @@ +/* + * AM33XX Power domain data + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include "powerdomain.h" +#include "prcm-common.h" +#include "prm-regbits-33xx.h" +#include "prm33xx.h" + +static struct powerdomain gfx_33xx_pwrdm = { + .name = "gfx_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_GFX_MOD, + .pwrstctrl_offs = AM33XX_PM_GFX_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_GFX_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .banks = 1, + .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK, + .mem_on_mask = { + [0] = AM33XX_GFX_MEM_ONSTATE_MASK, /* gfx_mem */ + }, + .mem_ret_mask = { + [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */ + }, + .mem_pwrst_mask = { + [0] = AM33XX_GFX_MEM_STATEST_MASK, /* gfx_mem */ + }, + .mem_retst_mask = { + [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */ + }, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* gfx_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* gfx_mem */ + }, +}; + +static struct powerdomain rtc_33xx_pwrdm = { + .name = "rtc_pwrdm", + .voltdm = { .name = "rtc" }, + .prcm_offs = AM33XX_PRM_RTC_MOD, + .pwrstctrl_offs = AM33XX_PM_RTC_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_RTC_PWRSTST_OFFSET, + .pwrsts = PWRSTS_ON, + .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK, +}; + +static struct powerdomain wkup_33xx_pwrdm = { + .name = "wkup_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_WKUP_MOD, + .pwrstctrl_offs = AM33XX_PM_WKUP_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_WKUP_PWRSTST_OFFSET, + .pwrsts = PWRSTS_ON, + .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK, +}; + +static struct powerdomain per_33xx_pwrdm = { + .name = "per_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_PER_MOD, + .pwrstctrl_offs = AM33XX_PM_PER_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_PER_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .banks = 3, + .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK, + .mem_on_mask = { + [0] = AM33XX_PRUSS_MEM_ONSTATE_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_ONSTATE_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_ONSTATE_MASK, /* ram_mem */ + }, + .mem_ret_mask = { + [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */ + }, + .mem_pwrst_mask = { + [0] = AM33XX_PRUSS_MEM_STATEST_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_STATEST_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_STATEST_MASK, /* ram_mem */ + }, + .mem_retst_mask = { + [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */ + }, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* pruss_mem */ + [1] = PWRSTS_OFF_RET, /* per_mem */ + [2] = PWRSTS_OFF_RET, /* ram_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* pruss_mem */ + [1] = PWRSTS_ON, /* per_mem */ + [2] = PWRSTS_ON, /* ram_mem */ + }, +}; + +static struct powerdomain mpu_33xx_pwrdm = { + .name = "mpu_pwrdm", + .voltdm = { .name = "mpu" }, + .prcm_offs = AM33XX_PRM_MPU_MOD, + .pwrstctrl_offs = AM33XX_PM_MPU_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_MPU_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .banks = 3, + .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK, + .mem_on_mask = { + [0] = AM33XX_MPU_L1_ONSTATE_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_ONSTATE_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_ONSTATE_MASK, /* mpu_ram */ + }, + .mem_ret_mask = { + [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */ + }, + .mem_pwrst_mask = { + [0] = AM33XX_MPU_L1_STATEST_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_STATEST_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_STATEST_MASK, /* mpu_ram */ + }, + .mem_retst_mask = { + [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */ + }, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* mpu_l1 */ + [1] = PWRSTS_OFF_RET, /* mpu_l2 */ + [2] = PWRSTS_OFF_RET, /* mpu_ram */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* mpu_l1 */ + [1] = PWRSTS_ON, /* mpu_l2 */ + [2] = PWRSTS_ON, /* mpu_ram */ + }, +}; + +static struct powerdomain cefuse_33xx_pwrdm = { + .name = "cefuse_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_CEFUSE_MOD, + .pwrstctrl_offs = AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_CEFUSE_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_ON, +}; + +static struct powerdomain *powerdomains_am33xx[] __initdata = { + &gfx_33xx_pwrdm, + &rtc_33xx_pwrdm, + &wkup_33xx_pwrdm, + &per_33xx_pwrdm, + &mpu_33xx_pwrdm, + &cefuse_33xx_pwrdm, + NULL, +}; + +void __init am33xx_powerdomains_init(void) +{ + pwrdm_register_platform_funcs(&am33xx_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_am33xx); + pwrdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h new file mode 100644 index 000000000000..0221b5c20e87 --- /dev/null +++ b/arch/arm/mach-omap2/prm-regbits-33xx.h @@ -0,0 +1,357 @@ +/* + * AM33XX PRM_XXX register bits + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H + +#include "prm.h" + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ABBOFF_ACT_EXPORT_SHIFT 1 +#define AM33XX_ABBOFF_ACT_EXPORT_MASK (1 << 1) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ABBOFF_SLEEP_EXPORT_SHIFT 2 +#define AM33XX_ABBOFF_SLEEP_EXPORT_MASK (1 << 2) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_AIPOFF_SHIFT 8 +#define AM33XX_AIPOFF_MASK (1 << 8) + +/* Used by PM_WKUP_PWRSTST */ +#define AM33XX_DEBUGSS_MEM_STATEST_SHIFT 17 +#define AM33XX_DEBUGSS_MEM_STATEST_MASK (0x3 << 17) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_DISABLE_RTA_EXPORT_SHIFT 0 +#define AM33XX_DISABLE_RTA_EXPORT_MASK (1 << 0) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_CORE_RECAL_EN_SHIFT 12 +#define AM33XX_DPLL_CORE_RECAL_EN_MASK (1 << 12) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_CORE_RECAL_ST_SHIFT 12 +#define AM33XX_DPLL_CORE_RECAL_ST_MASK (1 << 12) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_DDR_RECAL_EN_SHIFT 14 +#define AM33XX_DPLL_DDR_RECAL_EN_MASK (1 << 14) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_DDR_RECAL_ST_SHIFT 14 +#define AM33XX_DPLL_DDR_RECAL_ST_MASK (1 << 14) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_DISP_RECAL_EN_SHIFT 15 +#define AM33XX_DPLL_DISP_RECAL_EN_MASK (1 << 15) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_DISP_RECAL_ST_SHIFT 13 +#define AM33XX_DPLL_DISP_RECAL_ST_MASK (1 << 13) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_MPU_RECAL_EN_SHIFT 11 +#define AM33XX_DPLL_MPU_RECAL_EN_MASK (1 << 11) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_MPU_RECAL_ST_SHIFT 11 +#define AM33XX_DPLL_MPU_RECAL_ST_MASK (1 << 11) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_PER_RECAL_EN_SHIFT 13 +#define AM33XX_DPLL_PER_RECAL_EN_MASK (1 << 13) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_PER_RECAL_ST_SHIFT 15 +#define AM33XX_DPLL_PER_RECAL_ST_MASK (1 << 15) + +/* Used by RM_WKUP_RSTST */ +#define AM33XX_EMULATION_M3_RST_SHIFT 6 +#define AM33XX_EMULATION_M3_RST_MASK (1 << 6) + +/* Used by RM_MPU_RSTST */ +#define AM33XX_EMULATION_MPU_RST_SHIFT 5 +#define AM33XX_EMULATION_MPU_RST_MASK (1 << 5) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC1_EXPORT_SHIFT 3 +#define AM33XX_ENFUNC1_EXPORT_MASK (1 << 3) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC3_EXPORT_SHIFT 5 +#define AM33XX_ENFUNC3_EXPORT_MASK (1 << 5) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC4_SHIFT 6 +#define AM33XX_ENFUNC4_MASK (1 << 6) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC5_SHIFT 7 +#define AM33XX_ENFUNC5_MASK (1 << 7) + +/* Used by PRM_RSTST */ +#define AM33XX_EXTERNAL_WARM_RST_SHIFT 5 +#define AM33XX_EXTERNAL_WARM_RST_MASK (1 << 5) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_FORCEWKUP_EN_SHIFT 10 +#define AM33XX_FORCEWKUP_EN_MASK (1 << 10) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_FORCEWKUP_ST_SHIFT 10 +#define AM33XX_FORCEWKUP_ST_MASK (1 << 10) + +/* Used by PM_GFX_PWRSTCTRL */ +#define AM33XX_GFX_MEM_ONSTATE_SHIFT 17 +#define AM33XX_GFX_MEM_ONSTATE_MASK (0x3 << 17) + +/* Used by PM_GFX_PWRSTCTRL */ +#define AM33XX_GFX_MEM_RETSTATE_SHIFT 6 +#define AM33XX_GFX_MEM_RETSTATE_MASK (1 << 6) + +/* Used by PM_GFX_PWRSTST */ +#define AM33XX_GFX_MEM_STATEST_SHIFT 4 +#define AM33XX_GFX_MEM_STATEST_MASK (0x3 << 4) + +/* Used by RM_GFX_RSTCTRL, RM_GFX_RSTST */ +#define AM33XX_GFX_RST_SHIFT 0 +#define AM33XX_GFX_RST_MASK (1 << 0) + +/* Used by PRM_RSTST */ +#define AM33XX_GLOBAL_COLD_RST_SHIFT 0 +#define AM33XX_GLOBAL_COLD_RST_MASK (1 << 0) + +/* Used by PRM_RSTST */ +#define AM33XX_GLOBAL_WARM_SW_RST_SHIFT 1 +#define AM33XX_GLOBAL_WARM_SW_RST_MASK (1 << 1) + +/* Used by RM_WKUP_RSTST */ +#define AM33XX_ICECRUSHER_M3_RST_SHIFT 7 +#define AM33XX_ICECRUSHER_M3_RST_MASK (1 << 7) + +/* Used by RM_MPU_RSTST */ +#define AM33XX_ICECRUSHER_MPU_RST_SHIFT 6 +#define AM33XX_ICECRUSHER_MPU_RST_MASK (1 << 6) + +/* Used by PRM_RSTST */ +#define AM33XX_ICEPICK_RST_SHIFT 9 +#define AM33XX_ICEPICK_RST_MASK (1 << 9) + +/* Used by RM_PER_RSTCTRL */ +#define AM33XX_PRUSS_LRST_SHIFT 1 +#define AM33XX_PRUSS_LRST_MASK (1 << 1) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PRUSS_MEM_ONSTATE_SHIFT 5 +#define AM33XX_PRUSS_MEM_ONSTATE_MASK (0x3 << 5) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PRUSS_MEM_RETSTATE_SHIFT 7 +#define AM33XX_PRUSS_MEM_RETSTATE_MASK (1 << 7) + +/* Used by PM_PER_PWRSTST */ +#define AM33XX_PRUSS_MEM_STATEST_SHIFT 23 +#define AM33XX_PRUSS_MEM_STATEST_MASK (0x3 << 23) + +/* + * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST, + * PM_WKUP_PWRSTST, PM_RTC_PWRSTST + */ +#define AM33XX_INTRANSITION_SHIFT 20 +#define AM33XX_INTRANSITION_MASK (1 << 20) + +/* Used by PM_CEFUSE_PWRSTST */ +#define AM33XX_LASTPOWERSTATEENTERED_SHIFT 24 +#define AM33XX_LASTPOWERSTATEENTERED_MASK (0x3 << 24) + +/* Used by PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_RTC_PWRSTCTRL */ +#define AM33XX_LOGICRETSTATE_SHIFT 2 +#define AM33XX_LOGICRETSTATE_MASK (1 << 2) + +/* Renamed from LOGICRETSTATE Used by PM_PER_PWRSTCTRL, PM_WKUP_PWRSTCTRL */ +#define AM33XX_LOGICRETSTATE_3_3_SHIFT 3 +#define AM33XX_LOGICRETSTATE_3_3_MASK (1 << 3) + +/* + * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST, + * PM_WKUP_PWRSTST, PM_RTC_PWRSTST + */ +#define AM33XX_LOGICSTATEST_SHIFT 2 +#define AM33XX_LOGICSTATEST_MASK (1 << 2) + +/* + * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL, + * PM_MPU_PWRSTCTRL, PM_WKUP_PWRSTCTRL, PM_RTC_PWRSTCTRL + */ +#define AM33XX_LOWPOWERSTATECHANGE_SHIFT 4 +#define AM33XX_LOWPOWERSTATECHANGE_MASK (1 << 4) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L1_ONSTATE_SHIFT 18 +#define AM33XX_MPU_L1_ONSTATE_MASK (0x3 << 18) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L1_RETSTATE_SHIFT 22 +#define AM33XX_MPU_L1_RETSTATE_MASK (1 << 22) + +/* Used by PM_MPU_PWRSTST */ +#define AM33XX_MPU_L1_STATEST_SHIFT 6 +#define AM33XX_MPU_L1_STATEST_MASK (0x3 << 6) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L2_ONSTATE_SHIFT 20 +#define AM33XX_MPU_L2_ONSTATE_MASK (0x3 << 20) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L2_RETSTATE_SHIFT 23 +#define AM33XX_MPU_L2_RETSTATE_MASK (1 << 23) + +/* Used by PM_MPU_PWRSTST */ +#define AM33XX_MPU_L2_STATEST_SHIFT 8 +#define AM33XX_MPU_L2_STATEST_MASK (0x3 << 8) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_RAM_ONSTATE_SHIFT 16 +#define AM33XX_MPU_RAM_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_RAM_RETSTATE_SHIFT 24 +#define AM33XX_MPU_RAM_RETSTATE_MASK (1 << 24) + +/* Used by PM_MPU_PWRSTST */ +#define AM33XX_MPU_RAM_STATEST_SHIFT 4 +#define AM33XX_MPU_RAM_STATEST_MASK (0x3 << 4) + +/* Used by PRM_RSTST */ +#define AM33XX_MPU_SECURITY_VIOL_RST_SHIFT 2 +#define AM33XX_MPU_SECURITY_VIOL_RST_MASK (1 << 2) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_PCHARGECNT_VALUE_SHIFT 0 +#define AM33XX_PCHARGECNT_VALUE_MASK (0x3f << 0) + +/* Used by RM_PER_RSTCTRL */ +#define AM33XX_PCI_LRST_SHIFT 0 +#define AM33XX_PCI_LRST_MASK (1 << 0) + +/* Renamed from PCI_LRST Used by RM_PER_RSTST */ +#define AM33XX_PCI_LRST_5_5_SHIFT 5 +#define AM33XX_PCI_LRST_5_5_MASK (1 << 5) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PER_MEM_ONSTATE_SHIFT 25 +#define AM33XX_PER_MEM_ONSTATE_MASK (0x3 << 25) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PER_MEM_RETSTATE_SHIFT 29 +#define AM33XX_PER_MEM_RETSTATE_MASK (1 << 29) + +/* Used by PM_PER_PWRSTST */ +#define AM33XX_PER_MEM_STATEST_SHIFT 17 +#define AM33XX_PER_MEM_STATEST_MASK (0x3 << 17) + +/* + * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL, + * PM_MPU_PWRSTCTRL + */ +#define AM33XX_POWERSTATE_SHIFT 0 +#define AM33XX_POWERSTATE_MASK (0x3 << 0) + +/* Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST */ +#define AM33XX_POWERSTATEST_SHIFT 0 +#define AM33XX_POWERSTATEST_MASK (0x3 << 0) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_RAM_MEM_ONSTATE_SHIFT 30 +#define AM33XX_RAM_MEM_ONSTATE_MASK (0x3 << 30) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_RAM_MEM_RETSTATE_SHIFT 27 +#define AM33XX_RAM_MEM_RETSTATE_MASK (1 << 27) + +/* Used by PM_PER_PWRSTST */ +#define AM33XX_RAM_MEM_STATEST_SHIFT 21 +#define AM33XX_RAM_MEM_STATEST_MASK (0x3 << 21) + +/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */ +#define AM33XX_RETMODE_ENABLE_SHIFT 0 +#define AM33XX_RETMODE_ENABLE_MASK (1 << 0) + +/* Used by REVISION_PRM */ +#define AM33XX_REV_SHIFT 0 +#define AM33XX_REV_MASK (0xff << 0) + +/* Used by PRM_RSTTIME */ +#define AM33XX_RSTTIME1_SHIFT 0 +#define AM33XX_RSTTIME1_MASK (0xff << 0) + +/* Used by PRM_RSTTIME */ +#define AM33XX_RSTTIME2_SHIFT 8 +#define AM33XX_RSTTIME2_MASK (0x1f << 8) + +/* Used by PRM_RSTCTRL */ +#define AM33XX_RST_GLOBAL_COLD_SW_SHIFT 1 +#define AM33XX_RST_GLOBAL_COLD_SW_MASK (1 << 1) + +/* Used by PRM_RSTCTRL */ +#define AM33XX_RST_GLOBAL_WARM_SW_SHIFT 0 +#define AM33XX_RST_GLOBAL_WARM_SW_MASK (1 << 0) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_SLPCNT_VALUE_SHIFT 16 +#define AM33XX_SLPCNT_VALUE_MASK (0xff << 16) + +/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */ +#define AM33XX_SRAMLDO_STATUS_SHIFT 8 +#define AM33XX_SRAMLDO_STATUS_MASK (1 << 8) + +/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */ +#define AM33XX_SRAM_IN_TRANSITION_SHIFT 9 +#define AM33XX_SRAM_IN_TRANSITION_MASK (1 << 9) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_STARTUP_COUNT_SHIFT 24 +#define AM33XX_STARTUP_COUNT_MASK (0xff << 24) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_TRANSITION_EN_SHIFT 8 +#define AM33XX_TRANSITION_EN_MASK (1 << 8) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_TRANSITION_ST_SHIFT 8 +#define AM33XX_TRANSITION_ST_MASK (1 << 8) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_VSETUPCNT_VALUE_SHIFT 8 +#define AM33XX_VSETUPCNT_VALUE_MASK (0xff << 8) + +/* Used by PRM_RSTST */ +#define AM33XX_WDT0_RST_SHIFT 3 +#define AM33XX_WDT0_RST_MASK (1 << 3) + +/* Used by PRM_RSTST */ +#define AM33XX_WDT1_RST_SHIFT 4 +#define AM33XX_WDT1_RST_MASK (1 << 4) + +/* Used by RM_WKUP_RSTCTRL */ +#define AM33XX_WKUP_M3_LRST_SHIFT 3 +#define AM33XX_WKUP_M3_LRST_MASK (1 << 3) + +/* Renamed from WKUP_M3_LRST Used by RM_WKUP_RSTST */ +#define AM33XX_WKUP_M3_LRST_5_5_SHIFT 5 +#define AM33XX_WKUP_M3_LRST_5_5_MASK (1 << 5) + +#endif diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9ce765407ad5..21cb74003a56 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,6 +15,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/irq.h> #include "common.h" #include <plat/cpu.h> @@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) static int __init omap3xxx_prcm_init(void) { - if (cpu_is_omap34xx()) - return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - return 0; + int ret = 0; + + if (cpu_is_omap34xx()) { + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + } + + return ret; } subsys_initcall(omap3xxx_prcm_init); diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c new file mode 100644 index 000000000000..e7dbb6cf1255 --- /dev/null +++ b/arch/arm/mach-omap2/prm33xx.c @@ -0,0 +1,135 @@ +/* + * AM33XX PRM functions + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <plat/common.h> + +#include "common.h" +#include "prm33xx.h" +#include "prm-regbits-33xx.h" + +/* Read a register in a PRM instance */ +u32 am33xx_prm_read_reg(s16 inst, u16 idx) +{ + return __raw_readl(prm_base + inst + idx); +} + +/* Write into a register in a PRM instance */ +void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx) +{ + __raw_writel(val, prm_base + inst + idx); +} + +/* Read-modify-write a register in PRM. Caller must lock */ +u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) +{ + u32 v; + + v = am33xx_prm_read_reg(inst, idx); + v &= ~mask; + v |= bits; + am33xx_prm_write_reg(v, inst, idx); + + return v; +} + +/** + * am33xx_prm_is_hardreset_asserted - read the HW reset line state of + * submodules contained in the hwmod module + * @shift: register bit shift corresponding to the reset line to check + * @inst: CM instance register offset (*_INST macro) + * @rstctrl_offs: RM_RSTCTRL register address offset for this module + * + * Returns 1 if the (sub)module hardreset line is currently asserted, + * 0 if the (sub)module hardreset line is not currently asserted, or + * -EINVAL upon parameter error. + */ +int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs) +{ + u32 v; + + v = am33xx_prm_read_reg(inst, rstctrl_offs); + v &= 1 << shift; + v >>= shift; + + return v; +} + +/** + * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule + * @shift: register bit shift corresponding to the reset line to assert + * @inst: CM instance register offset (*_INST macro) + * @rstctrl_reg: RM_RSTCTRL register address for this module + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * place the submodule into reset. Returns 0 upon success or -EINVAL + * upon an argument error. + */ +int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs) +{ + u32 mask = 1 << shift; + + am33xx_prm_rmw_reg_bits(mask, mask, inst, rstctrl_offs); + + return 0; +} + +/** + * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and + * wait + * @shift: register bit shift corresponding to the reset line to deassert + * @inst: CM instance register offset (*_INST macro) + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @rstst_reg: RM_RSTST register address for this module + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * take the submodule out of reset and wait until the PRCM indicates + * that the reset has completed before returning. Returns 0 upon success or + * -EINVAL upon an argument error, -EEXIST if the submodule was already out + * of reset, or -EBUSY if the submodule did not exit reset promptly. + */ +int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, + u16 rstctrl_offs, u16 rstst_offs) +{ + int c; + u32 mask = 1 << shift; + + /* Check the current status to avoid de-asserting the line twice */ + if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0) + return -EEXIST; + + /* Clear the reset status by writing 1 to the status bit */ + am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs); + /* de-assert the reset control line */ + am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs); + /* wait the status to be set */ + + omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst, + rstst_offs), + MAX_MODULE_HARDRESET_WAIT, c); + + return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; +} diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h new file mode 100644 index 000000000000..3f25c563a821 --- /dev/null +++ b/arch/arm/mach-omap2/prm33xx.h @@ -0,0 +1,129 @@ +/* + * AM33XX PRM instance offset macros + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM33XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM33XX_H + +#include "prcm-common.h" +#include "prm.h" + +#define AM33XX_PRM_BASE 0x44E00000 + +#define AM33XX_PRM_REGADDR(inst, reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRM_BASE + (inst) + (reg)) + + +/* PRM instances */ +#define AM33XX_PRM_OCP_SOCKET_MOD 0x0B00 +#define AM33XX_PRM_PER_MOD 0x0C00 +#define AM33XX_PRM_WKUP_MOD 0x0D00 +#define AM33XX_PRM_MPU_MOD 0x0E00 +#define AM33XX_PRM_DEVICE_MOD 0x0F00 +#define AM33XX_PRM_RTC_MOD 0x1000 +#define AM33XX_PRM_GFX_MOD 0x1100 +#define AM33XX_PRM_CEFUSE_MOD 0x1200 + +/* PRM */ + +/* PRM.OCP_SOCKET_PRM register offsets */ +#define AM33XX_REVISION_PRM_OFFSET 0x0000 +#define AM33XX_REVISION_PRM AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0000) +#define AM33XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004 +#define AM33XX_PRM_IRQSTATUS_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0004) +#define AM33XX_PRM_IRQENABLE_MPU_OFFSET 0x0008 +#define AM33XX_PRM_IRQENABLE_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0008) +#define AM33XX_PRM_IRQSTATUS_M3_OFFSET 0x000c +#define AM33XX_PRM_IRQSTATUS_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x000c) +#define AM33XX_PRM_IRQENABLE_M3_OFFSET 0x0010 +#define AM33XX_PRM_IRQENABLE_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0010) + +/* PRM.PER_PRM register offsets */ +#define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000 +#define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000) +#define AM33XX_RM_PER_RSTST_OFFSET 0x0004 +#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004) +#define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008 +#define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008) +#define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c +#define AM33XX_PM_PER_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x000c) + +/* PRM.WKUP_PRM register offsets */ +#define AM33XX_RM_WKUP_RSTCTRL_OFFSET 0x0000 +#define AM33XX_RM_WKUP_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0000) +#define AM33XX_PM_WKUP_PWRSTCTRL_OFFSET 0x0004 +#define AM33XX_PM_WKUP_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0004) +#define AM33XX_PM_WKUP_PWRSTST_OFFSET 0x0008 +#define AM33XX_PM_WKUP_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0008) +#define AM33XX_RM_WKUP_RSTST_OFFSET 0x000c +#define AM33XX_RM_WKUP_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x000c) + +/* PRM.MPU_PRM register offsets */ +#define AM33XX_PM_MPU_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_MPU_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0000) +#define AM33XX_PM_MPU_PWRSTST_OFFSET 0x0004 +#define AM33XX_PM_MPU_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0004) +#define AM33XX_RM_MPU_RSTST_OFFSET 0x0008 +#define AM33XX_RM_MPU_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0008) + +/* PRM.DEVICE_PRM register offsets */ +#define AM33XX_PRM_RSTCTRL_OFFSET 0x0000 +#define AM33XX_PRM_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0000) +#define AM33XX_PRM_RSTTIME_OFFSET 0x0004 +#define AM33XX_PRM_RSTTIME AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0004) +#define AM33XX_PRM_RSTST_OFFSET 0x0008 +#define AM33XX_PRM_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0008) +#define AM33XX_PRM_SRAM_COUNT_OFFSET 0x000c +#define AM33XX_PRM_SRAM_COUNT AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x000c) +#define AM33XX_PRM_LDO_SRAM_CORE_SETUP_OFFSET 0x0010 +#define AM33XX_PRM_LDO_SRAM_CORE_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0010) +#define AM33XX_PRM_LDO_SRAM_CORE_CTRL_OFFSET 0x0014 +#define AM33XX_PRM_LDO_SRAM_CORE_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0014) +#define AM33XX_PRM_LDO_SRAM_MPU_SETUP_OFFSET 0x0018 +#define AM33XX_PRM_LDO_SRAM_MPU_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0018) +#define AM33XX_PRM_LDO_SRAM_MPU_CTRL_OFFSET 0x001c +#define AM33XX_PRM_LDO_SRAM_MPU_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x001c) + +/* PRM.RTC_PRM register offsets */ +#define AM33XX_PM_RTC_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_RTC_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0000) +#define AM33XX_PM_RTC_PWRSTST_OFFSET 0x0004 +#define AM33XX_PM_RTC_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0004) + +/* PRM.GFX_PRM register offsets */ +#define AM33XX_PM_GFX_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_GFX_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0000) +#define AM33XX_RM_GFX_RSTCTRL_OFFSET 0x0004 +#define AM33XX_RM_GFX_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0004) +#define AM33XX_PM_GFX_PWRSTST_OFFSET 0x0010 +#define AM33XX_PM_GFX_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0010) +#define AM33XX_RM_GFX_RSTST_OFFSET 0x0014 +#define AM33XX_RM_GFX_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0014) + +/* PRM.CEFUSE_PRM register offsets */ +#define AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_CEFUSE_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0000) +#define AM33XX_PM_CEFUSE_PWRSTST_OFFSET 0x0004 +#define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004) + +extern u32 am33xx_prm_read_reg(s16 inst, u16 idx); +extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx); +extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); +extern void am33xx_prm_global_warm_sw_reset(void); +extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, + u16 rstctrl_offs); +extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs); +extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, + u16 rstctrl_offs, u16 rstst_offs); +#endif diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 292d4aaca068..c1b93c752d70 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -57,6 +57,7 @@ struct omap_uart_state { struct list_head node; struct omap_hwmod *oh; + struct omap_device_pad default_omap_uart_pads[2]; }; static LIST_HEAD(uart_list); @@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) + +#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28 +static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN], + tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata; + +static void __init +omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ + uart->default_omap_uart_pads[0].name = rx_pad_name; + uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX | + OMAP_DEVICE_PAD_WAKEUP; + uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT | + OMAP_MUX_MODE0; + uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0; + uart->default_omap_uart_pads[1].name = tx_pad_name; + uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT | + OMAP_MUX_MODE0; + bdata->pads = uart->default_omap_uart_pads; + bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads); +} + +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) { + struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL; + struct omap_mux *rx_mux = NULL, *tx_mux = NULL; + char *rx_fmt, *tx_fmt; + int uart_nr = bdata->id + 1; + + if (bdata->id != 2) { + rx_fmt = "uart%d_rx.uart%d_rx"; + tx_fmt = "uart%d_tx.uart%d_tx"; + } else { + rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx"; + tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx"; + } + + snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt, + uart_nr, uart_nr); + snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt, + uart_nr, uart_nr); + + if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 && + omap_mux_get_by_name + (tx_pad_name, &tx_partition, &tx_mux) >= 0) { + u16 tx_mode, rx_mode; + + tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset); + rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset); + + /* + * Check if uart is used in default tx/rx mode i.e. in mux mode0 + * if yes then configure rx pin for wake up capability + */ + if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode)) + omap_serial_fill_uart_tx_rx_pads(bdata, uart); + } } #else -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ +} #endif static char *cmdline_find_option(char *str) @@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info) bdata.pads = NULL; bdata.pads_cnt = 0; - if (cpu_is_omap44xx() || cpu_is_omap34xx()) - omap_serial_fill_default_pads(&bdata); + omap_serial_check_wakeup(&bdata, uart); if (!info) omap_serial_init_port(&bdata, NULL); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 8fe75a81e12d..b5b5d92acd9d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -364,6 +364,11 @@ OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, OMAP_SYS_TIMER(3_secure) #endif +#ifdef CONFIG_SOC_AM33XX +OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE) +OMAP_SYS_TIMER(3_am33xx) +#endif + #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c deleted file mode 100644 index 1481078763b8..000000000000 --- a/arch/arm/mach-omap2/usb-fs.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <asm/irq.h> - -#include <plat/usb.h> -#include <plat/board.h> - -#include "control.h" -#include "mux.h" - -#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN -#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO -#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO -#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN -#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG - -#if defined(CONFIG_ARCH_OMAP2) - -#ifdef CONFIG_USB_GADGET_OMAP - -static struct resource udc_resources[] = { - /* order is significant! */ - { /* registers */ - .start = UDC_BASE, - .end = UDC_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { /* general IRQ */ - .start = INT_USB_IRQ_GEN, - .flags = IORESOURCE_IRQ, - }, { /* PIO IRQ */ - .start = INT_USB_IRQ_NISO, - .flags = IORESOURCE_IRQ, - }, { /* SOF IRQ */ - .start = INT_USB_IRQ_ISO, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dmamask = ~(u32)0; - -static struct platform_device udc_device = { - .name = "omap_udc", - .id = -1, - .dev = { - .dma_mask = &udc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(udc_resources), - .resource = udc_resources, -}; - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ - pdata->udc_device = &udc_device; -} - -#else - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; - -static struct resource ohci_resources[] = { - { - .start = OMAP_OHCI_BASE, - .end = OMAP_OHCI_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_IRQ_HGEN, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci_device = { - .name = "ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ - pdata->ohci_device = &ohci_device; -} - -#else - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) - -static struct resource otg_resources[] = { - /* order is significant! */ - { - .start = OTG_BASE, - .end = OTG_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = INT_USB_IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device otg_device = { - .name = "omap_otg", - .id = -1, - .num_resources = ARRAY_SIZE(otg_resources), - .resource = otg_resources, -}; - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ - pdata->otg_device = &otg_device; -} - -#else - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -static void omap2_usb_devconf_clear(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb_devconf_set(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_disable_5pinbitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_enable_5pinunitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI; - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device) -{ - u32 syscon1 = 0; - - omap2_usb_devconf_clear(0, USB_BIDIR_TLL); - - if (nwires == 0) - return 0; - - if (is_device) - omap_mux_init_signal("usb0_puen", 0); - - omap_mux_init_signal("usb0_dat", 0); - omap_mux_init_signal("usb0_txen", 0); - omap_mux_init_signal("usb0_se0", 0); - if (nwires != 3) - omap_mux_init_signal("usb0_rcv", 0); - - switch (nwires) { - case 3: - syscon1 = 2; - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 6: - syscon1 = 3; - omap_mux_init_signal("usb0_vp", 0); - omap_mux_init_signal("usb0_vm", 0); - omap2_usb_devconf_set(0, USB_UNIDIR); - break; - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 0, nwires); - } - - return syscon1 << 16; -} - -static u32 __init omap2_usb1_init(unsigned nwires) -{ - u32 syscon1 = 0; - - omap2_usb_devconf_clear(1, USB_BIDIR_TLL); - - if (nwires == 0) - return 0; - - /* NOTE: board-specific code must set up pin muxing for usb1, - * since each signal could come out on either of two balls. - */ - - switch (nwires) { - case 2: - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(1, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 6: - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 1, nwires); - } - - return syscon1 << 20; -} - -static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - u32 syscon1 = 0; - - omap2_usb2_disable_5pinbitll(); - alt_pingroup = 0; - - /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ - if (alt_pingroup || nwires == 0) - return 0; - - omap_mux_init_signal("usb2_dat", 0); - omap_mux_init_signal("usb2_se0", 0); - if (nwires > 2) - omap_mux_init_signal("usb2_txen", 0); - if (nwires > 3) - omap_mux_init_signal("usb2_rcv", 0); - - switch (nwires) { - case 2: - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(2, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 5: - /* NOTE: board-specific code must mux this setting depending - * on TLL link using DP/DM. Something must also - * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED} - * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0 - * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0 - */ - - syscon1 = 3; - omap2_usb2_enable_5pinunitll(); - break; - case 6: - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 2, nwires); - } - - return syscon1 << 24; -} - -void __init omap2_usbfs_init(struct omap_usb_config *pdata) -{ - struct clk *ick; - - if (!cpu_is_omap24xx()) - return; - - ick = clk_get(NULL, "usb_l4_ick"); - if (IS_ERR(ick)) - return; - - clk_enable(ick); - pdata->usb0_init = omap2_usb0_init; - pdata->usb1_init = omap2_usb1_init; - pdata->usb2_init = omap2_usb2_init; - udc_device_init(pdata); - ohci_device_init(pdata); - otg_device_init(pdata); - omap_otg_init(pdata); - clk_disable(ick); - clk_put(ick); -} - -#endif diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index b19d1b43c12e..c4a576856661 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#else .mode = MUSB_HOST, -#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) - .mode = MUSB_PERIPHERAL, #endif /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index db84a46ce7fd..805bea6edf17 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 3, status); return status; } - tusb_resources[2].start = irq + IH_GPIO_BASE; + tusb_resources[2].start = gpio_to_irq(irq); /* set up memory timings ... can speed them up later */ if (!ps_refclk) { diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 16a1b092cf36..a7c43c1042be 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -156,6 +156,7 @@ int omap_voltage_late_init(void); extern void omap2xxx_voltagedomains_init(void); extern void omap3xxx_voltagedomains_init(void); +extern void am33xx_voltagedomains_init(void); extern void omap44xx_voltagedomains_init(void); struct voltagedomain *voltdm_lookup(const char *name); diff --git a/arch/arm/mach-omap2/voltagedomains33xx_data.c b/arch/arm/mach-omap2/voltagedomains33xx_data.c new file mode 100644 index 000000000000..965458dc0cb9 --- /dev/null +++ b/arch/arm/mach-omap2/voltagedomains33xx_data.c @@ -0,0 +1,43 @@ +/* + * AM33XX voltage domain data + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include "voltage.h" + +static struct voltagedomain am33xx_voltdm_mpu = { + .name = "mpu", +}; + +static struct voltagedomain am33xx_voltdm_core = { + .name = "core", +}; + +static struct voltagedomain am33xx_voltdm_rtc = { + .name = "rtc", +}; + +static struct voltagedomain *voltagedomains_am33xx[] __initdata = { + &am33xx_voltdm_mpu, + &am33xx_voltdm_core, + &am33xx_voltdm_rtc, + NULL, +}; + +void __init am33xx_voltagedomains_init(void) +{ + voltdm_init(voltagedomains_am33xx); +} diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index 96484bcd34ca..11a3c1e9801f 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -35,5 +35,5 @@ #define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) #define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) - +#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300) #endif diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h new file mode 100644 index 000000000000..1aa5d0a50a0b --- /dev/null +++ b/arch/arm/mach-orion5x/include/mach/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-orion5x/include/mach/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include <mach/orion5x.h> +#include <asm/sizes.h> + +#define IO_SPACE_LIMIT SZ_2M +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE); +} + +#define __io(a) __io(a) +#endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 2745f5d95b3f..683e085ce162 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -82,6 +82,7 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) +#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 9e37026ef9dd..9bd135531d76 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -779,6 +779,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .init_irq = r8a7740_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = eva_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = eva_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 7bc5e7d39f9b..6a33cf393428 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -80,6 +80,7 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .init_irq = emev2_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm9d_add_standard_devices, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9d_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index d8e33b682832..c0ae815e7beb 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -455,6 +455,7 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g") .init_irq = sh73a0_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9g_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index b577f7c44678..150122a44630 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1512,6 +1512,9 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); + /* SDHI0 PORT172 card-detect IRQ26 */ + gpio_request(GPIO_FN_IRQ26_172, NULL); + #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 472d1f5361e5..3946c4ba2aa8 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = { enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, - MSTP219, + MSTP219, MSTP218, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP314, MSTP313, MSTP312, MSTP311, MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, @@ -497,6 +497,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */ [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ + [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */ [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ @@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ @@ -563,7 +564,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ - CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c index 550b23df4fd4..f04fad4ec4fb 100644 --- a/arch/arm/mach-shmobile/intc-r8a7779.c +++ b/arch/arm/mach-shmobile/intc-r8a7779.c @@ -35,6 +35,9 @@ #define INT2SMSKCR3 0xfe7822ac #define INT2SMSKCR4 0xfe7822b0 +#define INT2NTSR0 0xfe700060 +#define INT2NTSR1 0xfe700064 + static int r8a7779_set_wake(struct irq_data *data, unsigned int on) { return 0; /* always allow wakeup */ @@ -49,6 +52,10 @@ void __init r8a7779_init_irq(void) gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = r8a7779_set_wake; + /* route all interrupts to ARM */ + __raw_writel(0xffffffff, INT2NTSR0); + __raw_writel(0x3fffffff, INT2NTSR1); + /* unmask all known interrupts in INTCS2 */ __raw_writel(0xfffffff0, INT2SMSKCR0); __raw_writel(0xfff7ffff, INT2SMSKCR1); diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index bacdd667e3b1..e859fcdb3d58 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -25,7 +25,12 @@ #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \ of_machine_is_compatible("renesas,sh73a0")) #define is_r8a7779() machine_is_marzen() + +#ifdef CONFIG_ARCH_EMEV2 #define is_emev2() of_machine_is_compatible("renesas,emev2") +#else +#define is_emev2() (0) +#endif static unsigned int __init shmobile_smp_get_core_count(void) { diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 6a4bd582c028..fafce9ce8218 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -484,7 +484,7 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { }, }; -#define SH7372_CHCLR 0x220 +#define SH7372_CHCLR (0x220 - 0x20) static const struct sh_dmae_channel sh7372_dmae_channels[] = { { diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S index ea1564609bd4..9e3ae6bfe50d 100644 --- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h index 383ab04dc6c9..d50bdb605925 100644 --- a/arch/arm/mach-spear13xx/include/mach/dma.h +++ b/arch/arm/mach-spear13xx/include/mach/dma.h @@ -4,7 +4,7 @@ * DMA information for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h index 6d8c45b9f298..dac57fd0cdfd 100644 --- a/arch/arm/mach-spear13xx/include/mach/generic.h +++ b/arch/arm/mach-spear13xx/include/mach/generic.h @@ -4,7 +4,7 @@ * spear13xx machine family generic header file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h index cd6f4f86a56b..85f176311f63 100644 --- a/arch/arm/mach-spear13xx/include/mach/gpio.h +++ b/arch/arm/mach-spear13xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h index f542a24aa5f2..271a62b4cd31 100644 --- a/arch/arm/mach-spear13xx/include/mach/irqs.h +++ b/arch/arm/mach-spear13xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h index 30c57ef72686..65f27def239b 100644 --- a/arch/arm/mach-spear13xx/include/mach/spear.h +++ b/arch/arm/mach-spear13xx/include/mach/spear.h @@ -4,7 +4,7 @@ * spear13xx Machine family specific definition * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h index 31af3e8d976e..3a58b8284a6a 100644 --- a/arch/arm/mach-spear13xx/include/mach/timex.h +++ b/arch/arm/mach-spear13xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h index c7840896ae6e..70fe72f05dea 100644 --- a/arch/arm/mach-spear13xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c index fefd15b2f380..732d29bc7330 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -4,7 +4,7 @@ * SPEAr1310 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c index ee38cbc56869..81e4ed76ad06 100644 --- a/arch/arm/mach-spear13xx/spear1340.c +++ b/arch/arm/mach-spear13xx/spear1340.c @@ -4,7 +4,7 @@ * SPEAr1340 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index 50b349ae863d..cf936b106e27 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -4,7 +4,7 @@ * SPEAr13XX machines common source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S index 590519f10d6e..0a6381fad5d9 100644 --- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 4a95b9453c2a..ce19113ca791 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family generic header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h index 451b2081bfc9..2ac74c6db7f1 100644 --- a/arch/arm/mach-spear3xx/include/mach/gpio.h +++ b/arch/arm/mach-spear3xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 51bd62a0254c..803de76f5f36 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 18e2ac576f25..6309bf68d6f8 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 51eb953148a9..8cca95193d4d 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -4,7 +4,7 @@ * SPEAr3xx Machine family specific definition * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h index a38cc9de876f..9f5d08bd0c44 100644 --- a/arch/arm/mach-spear3xx/include/mach/timex.h +++ b/arch/arm/mach-spear3xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h index 53ba8bbc0dfa..b909b011f7c8 100644 --- a/arch/arm/mach-spear3xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f74a05bdb829..0f882ecb7d81 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -4,7 +4,7 @@ * SPEAr300 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 84dfb0900747..bbcf4571d361 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -4,7 +4,7 @@ * SPEAr310 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index a88fa841d29d..88d483bcd66a 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -4,7 +4,7 @@ * SPEAr320 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f22419ed74a8..0f41bd1c47c3 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -4,7 +4,7 @@ * SPEAr3XX machines common source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h index 3a789dbb69f7..d42cefc0356d 100644 --- a/arch/arm/mach-spear6xx/include/mach/gpio.h +++ b/arch/arm/mach-spear6xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 179e45774b3a..c34acc201d34 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 4d6a2ee99c3b..5beb7ebe2948 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -33,7 +33,7 @@ static bool is_enabled; -static void tegra_cpu_reset_handler_enable(void) +static void __init tegra_cpu_reset_handler_enable(void) { void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); void __iomem *evp_cpu_reset = diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 9c74ac545849..1509a3cb5833 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -580,43 +580,12 @@ static void ux500_uart0_reset(void) udelay(1); } -/* This needs to be referenced by callbacks */ -struct pinctrl *u0_p; -struct pinctrl_state *u0_def; -struct pinctrl_state *u0_sleep; - -static void ux500_uart0_init(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_def)) - return; - - ret = pinctrl_select_state(u0_p, u0_def); - if (ret) - pr_err("could not set UART0 defstate\n"); -} - -static void ux500_uart0_exit(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_sleep)) - return; - - ret = pinctrl_select_state(u0_p, u0_sleep); - if (ret) - pr_err("could not set UART0 idlestate\n"); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .init = ux500_uart0_init, - .exit = ux500_uart0_exit, .reset = ux500_uart0_reset, }; @@ -638,28 +607,7 @@ static struct amba_pl011_data uart2_plat = { static void __init mop500_uart_init(struct device *parent) { - struct amba_device *uart0_device; - - uart0_device = db8500_add_uart0(parent, &uart0_plat); - if (uart0_device) { - u0_p = pinctrl_get(&uart0_device->dev); - if (IS_ERR(u0_p)) - dev_err(&uart0_device->dev, - "could not get UART0 pinctrl\n"); - else { - u0_def = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(u0_def)) { - dev_err(&uart0_device->dev, - "could not get UART0 defstate\n"); - } - u0_sleep = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_SLEEP); - if (IS_ERR(u0_sleep)) - dev_err(&uart0_device->dev, - "could not get UART0 idlestate\n"); - } - } + db8500_add_uart0(parent, &uart0_plat); db8500_add_uart1(parent, &uart1_plat); db8500_add_uart2(parent, &uart2_plat); } diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index cf4687ee2a7b..cd8ea3588f93 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -169,26 +169,13 @@ static struct map_desc versatile_io_desc[] __initdata = { .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), .length = VERSATILE_PCI_CFG_BASE_SIZE, .type = MT_DEVICE - }, -#if 0 - { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE0, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), - .length = SZ_16M, - .type = MT_DEVICE }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE1, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1), - .length = SZ_16M, - .type = MT_DEVICE - }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE2, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2), - .length = SZ_16M, + .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), + .length = IO_SPACE_LIMIT, .type = MT_DEVICE }, #endif -#endif }; void __init versatile_map_io(void) diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 4d4973dd8fba..408e58da46c6 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -29,8 +29,9 @@ */ #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul +#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE -/* macro to get at IO space when running virtually */ +/* macro to get at MMIO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) #define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h new file mode 100644 index 000000000000..0406513be7d8 --- /dev/null +++ b/arch/arm/mach-versatile/include/mach/io.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-versatile/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define PCIO_BASE 0xeb000000ul + +#define __io(a) ((a) + PCIO_BASE) + +#endif diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 15c6a00000ec..bec933b04ef0 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -169,11 +169,18 @@ static struct pci_ops pci_versatile_ops = { .write = versatile_write_config, }; +static struct resource io_port = { + .name = "PCI", + .start = 0, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + static struct resource io_mem = { .name = "PCI I/O space", .start = VERSATILE_PCI_MEM_BASE0, .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }; static struct resource non_mem = { @@ -200,6 +207,12 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) "memory region (%d)\n", ret); goto out; } + ret = request_resource(&ioport_resource, &io_port); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate I/O " + "port region (%d)\n", ret); + goto out; + } ret = request_resource(&iomem_resource, &non_mem); if (ret) { printk(KERN_ERR "PCI: unable to allocate non-prefetchable " @@ -218,7 +231,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset); + pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -249,6 +262,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = 0; + sys->io_offset = 0; ret = pci_versatile_setup_resources(sys); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 106c4c0ebccd..4044abcf6f9d 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -228,7 +228,7 @@ static pte_t **consistent_pte; #define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M -unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; +static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; void __init init_consistent_dma_size(unsigned long size) { @@ -321,7 +321,7 @@ static struct arm_vmregion_head coherent_head = { .vm_list = LIST_HEAD_INIT(coherent_head.vm_list), }; -size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8; +static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8; static int __init early_coherent_pool(char *p) { @@ -1067,7 +1067,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t return NULL; while (count) { - int j, order = __ffs(count); + int j, order = __fls(count); pages[i] = alloc_pages(gfp | __GFP_NOWARN, order); while (!pages[i] && order) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c21d06c7dd7e..f54d59219764 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -212,7 +212,7 @@ EXPORT_SYMBOL(arm_dma_zone_size); * allocations. This must be the smallest DMA mask in the system, * so a successful GFP_DMA allocation will always satisfy this. */ -u32 arm_dma_limit; +phys_addr_t arm_dma_limit; static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole, unsigned long dma_size) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 93dc0c17cdcb..c471436c7952 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -62,7 +62,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #endif #ifdef CONFIG_ZONE_DMA -extern u32 arm_dma_limit; +extern phys_addr_t arm_dma_limit; #else #define arm_dma_limit ((u32)~0) #endif diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 62135849f48b..c641fb685017 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -762,6 +762,11 @@ b_epilogue: update_on_xread(ctx); emit(ARM_MOV_R(r_A, r_X), ctx); break; + case BPF_S_ANC_ALU_XOR_X: + /* A ^= X */ + update_on_xread(ctx); + emit(ARM_EOR_R(r_A, r_A, r_X), ctx); + break; case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol) */ ctx->seen |= SEEN_SKB; diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index 99ae5e3f46d2..7fa2f7d3cb90 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h @@ -68,6 +68,8 @@ #define ARM_INST_CMP_R 0x01500000 #define ARM_INST_CMP_I 0x03500000 +#define ARM_INST_EOR_R 0x00200000 + #define ARM_INST_LDRB_I 0x05d00000 #define ARM_INST_LDRB_R 0x07d00000 #define ARM_INST_LDRH_I 0x01d000b0 @@ -132,6 +134,8 @@ #define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm) #define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm) +#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm) + #define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \ | (off)) #define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \ diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c index 9129c9e7d532..88726f4dbbfa 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/plat-mxc/epit.c @@ -50,6 +50,7 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/clk.h> +#include <linux/err.h> #include <mach/hardware.h> #include <asm/mach/time.h> @@ -201,8 +202,16 @@ static int __init epit_clockevent_init(struct clk *timer_clk) return 0; } -void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init epit_timer_init(void __iomem *base, int irq) { + struct clk *timer_clk; + + timer_clk = clk_get_sys("imx-epit.0", NULL); + if (IS_ERR(timer_clk)) { + pr_err("i.MX epit: unable to get clk\n"); + return; + } + clk_prepare_enable(timer_clk); timer_base = base; diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index cf663d84e7c1..e429ca1b814a 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -54,8 +54,8 @@ extern void imx50_soc_init(void); extern void imx51_soc_init(void); extern void imx53_soc_init(void); extern void imx51_init_late(void); -extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); -extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); +extern void epit_timer_init(void __iomem *base, int irq); +extern void mxc_timer_init(void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); extern int mx25_clocks_init(void); diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h index 7ded6f1f74bc..3c080a32dbf5 100644 --- a/arch/arm/plat-mxc/include/mach/mx2_cam.h +++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h @@ -23,6 +23,7 @@ #ifndef __MACH_MX2_CAM_H_ #define __MACH_MX2_CAM_H_ +#define MX2_CAMERA_SWAP16 (1 << 0) #define MX2_CAMERA_EXT_VSYNC (1 << 1) #define MX2_CAMERA_CCIR (1 << 2) #define MX2_CAMERA_CCIR_INTERLACE (1 << 3) @@ -30,6 +31,7 @@ #define MX2_CAMERA_GATED_CLOCK (1 << 5) #define MX2_CAMERA_INV_DATA (1 << 6) #define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) +#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) /** * struct mx2_camera_platform_data - optional platform data for mx2_camera diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 99f958ca6cb8..00e8e659e667 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -58,6 +58,7 @@ /* MX31, MX35, MX25, MX5 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) +#define V2_TCTL_CLK_PER (2 << 6) #define V2_TCTL_FRR (1 << 9) #define V2_IR 0x0c #define V2_TSTAT 0x08 @@ -280,23 +281,22 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) return 0; } -void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init mxc_timer_init(void __iomem *base, int irq) { uint32_t tctl_val; + struct clk *timer_clk; struct clk *timer_ipg_clk; - if (!timer_clk) { - timer_clk = clk_get_sys("imx-gpt.0", "per"); - if (IS_ERR(timer_clk)) { - pr_err("i.MX timer: unable to get clk\n"); - return; - } - - timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); - if (!IS_ERR(timer_ipg_clk)) - clk_prepare_enable(timer_ipg_clk); + timer_clk = clk_get_sys("imx-gpt.0", "per"); + if (IS_ERR(timer_clk)) { + pr_err("i.MX timer: unable to get clk\n"); + return; } + timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); + if (!IS_ERR(timer_ipg_clk)) + clk_prepare_enable(timer_ipg_clk); + clk_prepare_enable(timer_clk); timer_base = base; @@ -309,7 +309,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ if (timer_is_v2()) - tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; + tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index ed8605f01155..6d87532871cd 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ - usb.o fb.o counter_32k.o + fb.o counter_32k.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 62ec5c452792..706b7e29397f 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -461,6 +461,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) struct clk *c; struct clk *pa; + mutex_lock(&clocks_mutex); seq_printf(s, "%-30s %-30s %-10s %s\n", "clock-name", "parent-name", "rate", "use-count"); @@ -469,6 +470,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) seq_printf(s, "%-30s %-30s %-10lu %d\n", c->name, pa ? pa->name : "none", c->rate, c->usecount); } + mutex_unlock(&clocks_mutex); return 0; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index cb16ade437cb..7fe626761e53 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -573,22 +573,25 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { - u32 status; - /* Clear CSR */ if (cpu_class_is_omap1()) - status = p->dma_read(CSR, lch); - else if (cpu_class_is_omap2()) + p->dma_read(CSR, lch); + else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); /* Enable some nice interrupts. */ p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch); } -static void omap_disable_channel_irq(int lch) +static inline void omap_disable_channel_irq(int lch) { - if (cpu_class_is_omap2()) - p->dma_write(0, CICR, lch); + /* disable channel interrupts */ + p->dma_write(0, CICR, lch); + /* Clear CSR */ + if (cpu_class_is_omap1()) + p->dma_read(CSR, lch); + else + p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); } void omap_enable_dma_irq(int lch, u16 bits) @@ -632,14 +635,14 @@ static inline void disable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); /* Disable interrupts */ + omap_disable_channel_irq(lch); + if (cpu_class_is_omap1()) { - p->dma_write(0, CICR, lch); /* Set the STOP_LNK bit */ l |= 1 << 14; } if (cpu_class_is_omap2()) { - omap_disable_channel_irq(lch); /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -657,6 +660,9 @@ static inline void omap2_enable_irq_lch(int lch) return; spin_lock_irqsave(&dma_chan_lock, flags); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); + /* Enable interrupt */ val = p->dma_read(IRQENABLE_L0, lch); val |= 1 << lch; p->dma_write(val, IRQENABLE_L0, lch); @@ -672,9 +678,12 @@ static inline void omap2_disable_irq_lch(int lch) return; spin_lock_irqsave(&dma_chan_lock, flags); + /* Disable interrupt */ val = p->dma_read(IRQENABLE_L0, lch); val &= ~(1 << lch); p->dma_write(val, IRQENABLE_L0, lch); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); spin_unlock_irqrestore(&dma_chan_lock, flags); } @@ -745,11 +754,8 @@ int omap_request_dma(int dev_id, const char *dev_name, } if (cpu_class_is_omap2()) { - omap2_enable_irq_lch(free_ch); omap_enable_channel_irq(free_ch); - /* Clear the CSR register and IRQ status register */ - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch); - p->dma_write(1 << free_ch, IRQSTATUS_L0, 0); + omap2_enable_irq_lch(free_ch); } *dma_ch_out = free_ch; @@ -768,27 +774,19 @@ void omap_free_dma(int lch) return; } - if (cpu_class_is_omap1()) { - /* Disable all DMA interrupts for the channel. */ - p->dma_write(0, CICR, lch); - /* Make sure the DMA transfer is stopped. */ - p->dma_write(0, CCR, lch); - } - - if (cpu_class_is_omap2()) { + /* Disable interrupt for logical channel */ + if (cpu_class_is_omap2()) omap2_disable_irq_lch(lch); - /* Clear the CSR register and IRQ status register */ - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); - p->dma_write(1 << lch, IRQSTATUS_L0, lch); + /* Disable all DMA interrupts for the channel. */ + omap_disable_channel_irq(lch); - /* Disable all DMA interrupts for the channel. */ - p->dma_write(0, CICR, lch); + /* Make sure the DMA transfer is stopped. */ + p->dma_write(0, CCR, lch); - /* Make sure the DMA transfer is stopped. */ - p->dma_write(0, CCR, lch); + /* Clear registers */ + if (cpu_class_is_omap2()) omap_clear_dma(lch); - } spin_lock_irqsave(&dma_chan_lock, flags); dma_chan[lch].dev_id = -1; @@ -943,8 +941,7 @@ void omap_stop_dma(int lch) u32 l; /* Disable all interrupts on the channel */ - if (cpu_class_is_omap1()) - p->dma_write(0, CICR, lch); + omap_disable_channel_irq(lch); l = p->dma_read(CCR, lch); if (IS_DMA_ERRATA(DMA_ERRATA_i541) && diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 4814c5b65306..e62f20a5c0af 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -57,44 +57,6 @@ struct omap_camera_sensor_config { int (*power_off)(void * data); }; -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; - - struct platform_device *udc_device; - struct platform_device *ohci_device; - struct platform_device *otg_device; - - u32 (*usb0_init)(unsigned nwires, unsigned is_device); - u32 (*usb1_init)(unsigned nwires); - u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); - - int (*ocpi_enable)(void); -}; - struct omap_lcd_config { char panel_name[16]; char ctrl_name[16]; diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index d0ef57c1d71b..656b9862279e 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -156,7 +156,6 @@ struct dpll_data { u8 min_divider; u16 max_divider; u8 modes; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) void __iomem *autoidle_reg; void __iomem *idlest_reg; u32 autoidle_mask; @@ -167,7 +166,6 @@ struct dpll_data { u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; -# endif u8 flags; }; diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 297245dba66e..de6c0a08f461 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -252,8 +252,6 @@ IS_AM_SUBCLASS(335x, 0x335) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 - * cpu_is_omap3505(): True for OMAP3505 - * cpu_is_omap3517(): True for OMAP3517 */ #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) @@ -277,8 +275,6 @@ IS_OMAP_TYPE(2422, 0x2422) IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -IS_OMAP_TYPE(3505, 0x3517) -IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap310() 0 #define cpu_is_omap730() 0 @@ -293,12 +289,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap2422() 0 #define cpu_is_omap2423() 0 #define cpu_is_omap2430() 0 -#define cpu_is_omap3503() 0 -#define cpu_is_omap3515() 0 -#define cpu_is_omap3525() 0 -#define cpu_is_omap3530() 0 -#define cpu_is_omap3505() 0 -#define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 #define cpu_is_omap3630() 0 @@ -350,12 +340,6 @@ IS_OMAP_TYPE(3517, 0x3517) #if defined(CONFIG_ARCH_OMAP3) # undef cpu_is_omap3430 -# undef cpu_is_omap3503 -# undef cpu_is_omap3515 -# undef cpu_is_omap3525 -# undef cpu_is_omap3530 -# undef cpu_is_omap3505 -# undef cpu_is_omap3517 # undef cpu_is_ti81xx # undef cpu_is_ti816x # undef cpu_is_ti814x @@ -363,19 +347,6 @@ IS_OMAP_TYPE(3517, 0x3517) # undef cpu_is_am33xx # undef cpu_is_am335x # define cpu_is_omap3430() is_omap3430() -# define cpu_is_omap3503() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (!omap3_has_sgx())) -# define cpu_is_omap3515() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (omap3_has_sgx())) -# define cpu_is_omap3525() (cpu_is_omap3430() && \ - (!omap3_has_sgx()) && \ - (omap3_has_iva())) -# define cpu_is_omap3530() (cpu_is_omap3430()) -# define cpu_is_omap3517() is_omap3517() -# define cpu_is_omap3505() (cpu_is_omap3517() && \ - !omap3_has_sgx()) # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() # define cpu_is_ti81xx() is_ti81xx() @@ -424,10 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) #define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) -#define OMAP3517_CLASS 0x35170034 -#define OMAP3517_REV_ES1_0 OMAP3517_CLASS -#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8)) - #define TI816X_CLASS 0x81600034 #define TI8168_REV_ES1_0 TI816X_CLASS #define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h index 9c604b390f9f..5927709b1908 100644 --- a/arch/arm/plat-omap/include/plat/dsp.h +++ b/arch/arm/plat-omap/include/plat/dsp.h @@ -18,6 +18,9 @@ struct omap_dsp_platform_data { u32 (*dsp_cm_read)(s16 , u16); u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16); + void (*set_bootaddr)(u32); + void (*set_bootmode)(u8); + phys_addr_t phys_mempool_base; phys_addr_t phys_mempool_size; }; diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index a7754a886d42..5493bd95da5e 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -172,8 +172,7 @@ struct omap_mmc_platform_data { extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ - defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); @@ -185,7 +184,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) { } - #endif extern int omap_msdi_reset(struct omap_hwmod *oh); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index c835b7194ff5..a8ecc53b3670 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -629,6 +629,8 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); +extern void __init omap_hwmod_init(void); + /* * Chip variant-specific hwmod init routines - XXX should be converted * to use initcalls once the initial boot ordering is straightened out diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index b073e5f2b190..28e2d250c2fd 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -60,6 +60,9 @@ /* AM3505/3517 UART4 */ #define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 @@ -93,6 +96,7 @@ #define TI81XXUART1 81 #define TI81XXUART2 82 #define TI81XXUART3 83 +#define AM33XXUART1 84 #define ZOOM_UART 95 /* Only on zoom2/3 */ /* This is only used by 8250.c for omap1510 */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index cc3f11ba7a99..ac4323390213 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -103,6 +103,10 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ TI81XXUART##p) +#define DEBUG_LL_AM33XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + AM33XXUART##p) + static inline void __arch_decomp_setup(unsigned long arch_id) { int port = 0; @@ -183,6 +187,8 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* TI8148 base boards using UART1 */ DEBUG_LL_TI81XX(1, ti8148evm); + /* AM33XX base boards using UART1 */ + DEBUG_LL_AM33XX(1, am335xevm); } while (0); } diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 762eeb0626c1..548a4c8d63df 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -44,6 +44,8 @@ struct usbhs_omap_board_data { struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; +#ifdef CONFIG_ARCH_OMAP2PLUS + struct ehci_hcd_omap_platform_data { enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; int reset_gpio_port[OMAP3_HS_USB_PORTS]; @@ -64,26 +66,6 @@ struct usbhs_omap_platform_data { }; /*-------------------------------------------------------------------------*/ -#define OMAP1_OTG_BASE 0xfffb0400 -#define OMAP1_UDC_BASE 0xfffb4000 -#define OMAP1_OHCI_BASE 0xfffba000 - -#define OMAP2_OHCI_BASE 0x4805e000 -#define OMAP2_UDC_BASE 0x4805e200 -#define OMAP2_OTG_BASE 0x4805e300 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OTG_BASE OMAP1_OTG_BASE -#define UDC_BASE OMAP1_UDC_BASE -#define OMAP_OHCI_BASE OMAP1_OHCI_BASE - -#else - -#define OTG_BASE OMAP2_OTG_BASE -#define UDC_BASE OMAP2_UDC_BASE -#define OMAP_OHCI_BASE OMAP2_OHCI_BASE - struct omap_musb_board_data { u8 interface_type; u8 mode; @@ -107,44 +89,6 @@ extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); -/* - * NOTE: Please update omap USB drivers to use ioremap + read/write - */ - -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) - -static inline u8 omap_readb(u32 pa) -{ - return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u16 omap_readw(u32 pa) -{ - return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u32 omap_readl(u32 pa) -{ - return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writeb(u8 v, u32 pa) -{ - __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); -} - - -static inline void omap_writew(u16 v, u32 pa) -{ - __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writel(u32 v, u32 pa) -{ - __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); -} - #endif extern void am35x_musb_reset(void); @@ -153,142 +97,6 @@ extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); extern void ti81xx_musb_phy_power(u8 on); -/* - * FIXME correct answer depends on hmc_mode, - * as does (on omap1) any nonzero value for config->otg port number - */ -#ifdef CONFIG_USB_GADGET_OMAP -#define is_usb0_device(config) 1 -#else -#define is_usb0_device(config) 0 -#endif - -void omap_otg_init(struct omap_usb_config *config); - -#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) -void omap1_usb_init(struct omap_usb_config *pdata); -#else -static inline void omap1_usb_init(struct omap_usb_config *pdata) -{ -} -#endif - -#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) -void omap2_usbfs_init(struct omap_usb_config *pdata); -#else -static inline void omap2_usbfs_init(struct omap_usb_config *pdata) -{ -} -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * OTG and transceiver registers, for OMAPs starting with ARM926 - */ -#define OTG_REV (OTG_BASE + 0x00) -#define OTG_SYSCON_1 (OTG_BASE + 0x04) -# define USB2_TRX_MODE(w) (((w)>>24)&0x07) -# define USB1_TRX_MODE(w) (((w)>>20)&0x07) -# define USB0_TRX_MODE(w) (((w)>>16)&0x07) -# define OTG_IDLE_EN (1 << 15) -# define HST_IDLE_EN (1 << 14) -# define DEV_IDLE_EN (1 << 13) -# define OTG_RESET_DONE (1 << 2) -# define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2 (OTG_BASE + 0x08) -# define OTG_EN (1 << 31) -# define USBX_SYNCHRO (1 << 30) -# define OTG_MST16 (1 << 29) -# define SRP_GPDATA (1 << 28) -# define SRP_GPDVBUS (1 << 27) -# define SRP_GPUVBUS(w) (((w)>>24)&0x07) -# define A_WAIT_VRISE(w) (((w)>>20)&0x07) -# define B_ASE_BRST(w) (((w)>>16)&0x07) -# define SRP_DPW (1 << 14) -# define SRP_DATA (1 << 13) -# define SRP_VBUS (1 << 12) -# define OTG_PADEN (1 << 10) -# define HMC_PADEN (1 << 9) -# define UHOST_EN (1 << 8) -# define HMC_TLLSPEED (1 << 7) -# define HMC_TLLATTACH (1 << 6) -# define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL (OTG_BASE + 0x0c) -# define OTG_USB2_EN (1 << 29) -# define OTG_USB2_DP (1 << 28) -# define OTG_USB2_DM (1 << 27) -# define OTG_USB1_EN (1 << 26) -# define OTG_USB1_DP (1 << 25) -# define OTG_USB1_DM (1 << 24) -# define OTG_USB0_EN (1 << 23) -# define OTG_USB0_DP (1 << 22) -# define OTG_USB0_DM (1 << 21) -# define OTG_ASESSVLD (1 << 20) -# define OTG_BSESSEND (1 << 19) -# define OTG_BSESSVLD (1 << 18) -# define OTG_VBUSVLD (1 << 17) -# define OTG_ID (1 << 16) -# define OTG_DRIVER_SEL (1 << 15) -# define OTG_A_SETB_HNPEN (1 << 12) -# define OTG_A_BUSREQ (1 << 11) -# define OTG_B_HNPEN (1 << 9) -# define OTG_B_BUSREQ (1 << 8) -# define OTG_BUSDROP (1 << 7) -# define OTG_PULLDOWN (1 << 5) -# define OTG_PULLUP (1 << 4) -# define OTG_DRV_VBUS (1 << 3) -# define OTG_PD_VBUS (1 << 2) -# define OTG_PU_VBUS (1 << 1) -# define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ -# define DRIVER_SWITCH (1 << 15) -# define A_VBUS_ERR (1 << 13) -# define A_REQ_TMROUT (1 << 12) -# define A_SRP_DETECT (1 << 11) -# define B_HNP_FAIL (1 << 10) -# define B_SRP_TMROUT (1 << 9) -# define B_SRP_DONE (1 << 8) -# define B_SRP_STARTED (1 << 7) -# define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ - // same bits as in IRQ_EN -#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ -# define OTGVPD (1 << 14) -# define OTGVPU (1 << 13) -# define OTGPUID (1 << 12) -# define USB2VDR (1 << 10) -# define USB2PDEN (1 << 9) -# define USB2PUEN (1 << 8) -# define USB1VDR (1 << 6) -# define USB1PDEN (1 << 5) -# define USB1PUEN (1 << 4) -# define USB0VDR (1 << 2) -# define USB0PDEN (1 << 1) -# define USB0PUEN (1 << 0) -#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ -#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ - -/*-------------------------------------------------------------------------*/ - -/* OMAP1 */ -#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) -# define CONF_USB2_UNI_R (1 << 8) -# define CONF_USB1_UNI_R (1 << 7) -# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -# define CONF_USB0_ISOLATE_R (1 << 3) -# define CONF_USB_PWRDN_DM_R (1 << 2) -# define CONF_USB_PWRDN_DP_R (1 << 1) - -/* OMAP2 */ -# define USB_UNIDIR 0x0 -# define USB_UNIDIR_TLL 0x1 -# define USB_BIDIR 0x2 -# define USB_BIDIR_TLL 0x3 -# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) -# define USBT2TLL5PI (1 << 17) -# define USB0PUENACTLOI (1 << 16) -# define USBSTANDBYCTRL (1 << 15) /* AM35x */ /* USB 2.0 PHY Control */ #define CONF2_PHY_GPIOMODE (1 << 23) diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c deleted file mode 100644 index daa0327381b5..000000000000 --- a/arch/arm/plat-omap/usb.c +++ /dev/null @@ -1,145 +0,0 @@ - /* - * arch/arm/plat-omap/usb.c -- platform level USB initialization - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <plat/usb.h> -#include <plat/board.h> - -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_OMAP_OTG - -void __init -omap_otg_init(struct omap_usb_config *config) -{ - u32 syscon; - int alt_pingroup = 0; - - /* NOTE: no bus or clock setup (yet?) */ - - syscon = omap_readl(OTG_SYSCON_1) & 0xffff; - if (!(syscon & OTG_RESET_DONE)) - pr_debug("USB resets not complete?\n"); - - //omap_writew(0, OTG_IRQ_EN); - - /* pin muxing and transceiver pinouts */ - if (config->pins[0] > 2) /* alt pingroup 2 */ - alt_pingroup = 1; - syscon |= config->usb0_init(config->pins[0], is_usb0_device(config)); - syscon |= config->usb1_init(config->pins[1]); - syscon |= config->usb2_init(config->pins[2], alt_pingroup); - pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); - omap_writel(syscon, OTG_SYSCON_1); - - syscon = config->hmc_mode; - syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */; -#ifdef CONFIG_USB_OTG - if (config->otg) - syscon |= OTG_EN; -#endif - if (cpu_class_is_omap1()) - pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", - omap_readl(USB_TRANSCEIVER_CTRL)); - pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2)); - omap_writel(syscon, OTG_SYSCON_2); - - printk("USB: hmc %d", config->hmc_mode); - if (!alt_pingroup) - printk(", usb2 alt %d wires", config->pins[2]); - else if (config->pins[0]) - printk(", usb0 %d wires%s", config->pins[0], - is_usb0_device(config) ? " (dev)" : ""); - if (config->pins[1]) - printk(", usb1 %d wires", config->pins[1]); - if (!alt_pingroup && config->pins[2]) - printk(", usb2 %d wires", config->pins[2]); - if (config->otg) - printk(", Mini-AB on usb%d", config->otg - 1); - printk("\n"); - - if (cpu_class_is_omap1()) { - u16 w; - - /* leave USB clocks/controllers off until needed */ - w = omap_readw(ULPD_SOFT_REQ); - w &= ~SOFT_USB_CLK_REQ; - omap_writew(w, ULPD_SOFT_REQ); - - w = omap_readw(ULPD_CLOCK_CTRL); - w &= ~USB_MCLK_EN; - w |= DIS_USB_PVCI_CLK; - omap_writew(w, ULPD_CLOCK_CTRL); - } - syscon = omap_readl(OTG_SYSCON_1); - syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; - -#ifdef CONFIG_USB_GADGET_OMAP - if (config->otg || config->register_dev) { - struct platform_device *udc_device = config->udc_device; - int status; - - syscon &= ~DEV_IDLE_EN; - udc_device->dev.platform_data = config; - status = platform_device_register(udc_device); - if (status) - pr_debug("can't register UDC device, %d\n", status); - } -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - if (config->otg || config->register_host) { - struct platform_device *ohci_device = config->ohci_device; - int status; - - syscon &= ~HST_IDLE_EN; - ohci_device->dev.platform_data = config; - status = platform_device_register(ohci_device); - if (status) - pr_debug("can't register OHCI device, %d\n", status); - } -#endif - -#ifdef CONFIG_USB_OTG - if (config->otg) { - struct platform_device *otg_device = config->otg_device; - int status; - - syscon &= ~OTG_IDLE_EN; - otg_device->dev.platform_data = config; - status = platform_device_register(otg_device); - if (status) - pr_debug("can't register OTG device, %d\n", status); - } -#endif - pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); - omap_writel(syscon, OTG_SYSCON_1); -} - -#else -void omap_otg_init(struct omap_usb_config *config) {} -#endif diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 61fd837624a8..c1793786aea9 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -582,7 +582,7 @@ void __init orion_spi_1_init(unsigned long mapbase) * Watchdog ****************************************************************************/ static struct resource orion_wdt_resource = - DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28); + DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28); static struct platform_device orion_wdt_device = { .name = "orion_wdt", diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index 58b79809d20c..584c9bf8ed2d 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -193,6 +193,7 @@ static const struct platform_device_id ssp_id_table[] = { { "pxa25x-nssp", PXA25x_NSSP }, { "pxa27x-ssp", PXA27x_SSP }, { "pxa168-ssp", PXA168_SSP }, + { "pxa910-ssp", PXA910_SSP }, { }, }; diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h index 7d048759b772..c0c70a895ca8 100644 --- a/arch/arm/plat-samsung/include/plat/map-s3c.h +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -22,7 +22,7 @@ #define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG #define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000) #define S3C2410_PA_UART (0x50000000) #define S3C24XX_PA_UART S3C2410_PA_UART diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index f19aff19205c..bc4db9b04e36 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -25,7 +25,7 @@ static inline void arch_wdt_reset(void) __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - if (s3c2410_wdtclk) + if (!IS_ERR(s3c2410_wdtclk)) clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index ab3de721c5db..75b05ad0fbad 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header for spear platform * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h index e14a3e4932f9..2bc6b54460a8 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h index 03ed8b585dcf..88a7fbd24793 100644 --- a/arch/arm/plat-spear/include/plat/shirq.h +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h index 914d09dd50fd..ef95e5b780bd 100644 --- a/arch/arm/plat-spear/include/plat/timex.h +++ b/arch/arm/plat-spear/include/plat/timex.h @@ -4,7 +4,7 @@ * SPEAr platform specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 6dd455bafdfd..2ce6cb17a98b 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c index a56a067717c1..12cf27f935f9 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/plat-spear/pl080.c @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index ea0a61302b7e..4f990115b1bd 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -4,7 +4,7 @@ * SPEAr platform specific restart functions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c index 961fb7261243..853e891e1184 100644 --- a/arch/arm/plat-spear/shirq.c +++ b/arch/arm/plat-spear/shirq.c @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer source file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any |
