diff options
Diffstat (limited to 'arch/arm')
236 files changed, 3814 insertions, 4057 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2747202e3c4c..cdfa6c2b7626 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -527,10 +527,10 @@ config ARCH_LPC32XX select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP - select CLKSRC_MMIO + select CLKSRC_LPC32XX + select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select HAVE_IDE select USE_OF help Support for the NXP LPC32XX family of processors @@ -573,7 +573,6 @@ config ARCH_RPC select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NO_IOPORT_MAP - select VIRT_TO_BUS help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -624,6 +623,7 @@ config ARCH_DAVINCI select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select CPU_ARM926T select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP @@ -1221,7 +1221,6 @@ config PCI_HOST_ITE8152 select DMABOUNCE source "drivers/pci/Kconfig" -source "drivers/pci/pcie/Kconfig" source "drivers/pcmcia/Kconfig" @@ -1346,7 +1345,6 @@ config BIG_LITTLE config BL_SWITCHER bool "big.LITTLE switcher support" depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC - select ARM_CPU_SUSPEND select CPU_PM help The big.LITTLE "switcher" provides the core functionality to @@ -2120,7 +2118,8 @@ config ARCH_SUSPEND_POSSIBLE def_bool y config ARM_CPU_SUSPEND - def_bool PM_SLEEP + def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW + depends on ARCH_SUSPEND_POSSIBLE config ARCH_HIBERNATION_POSSIBLE bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 4eb24c633714..8c3ce2ac44c4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -353,7 +353,6 @@ archclean: # My testing targets (bypasses dependencies) bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage -i zi:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ define archhelp diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9eca7aee927f..48fab15cfc02 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -88,7 +88,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) @$(kecho) ' Kernel: $@ is ready' -PHONY += initrd FORCE +PHONY += initrd initrd: @test "$(INITRD_PHYS)" != "" || \ (echo This machine does not support INITRD; exit -1) @@ -107,12 +107,4 @@ uinstall: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/uImage System.map "$(INSTALL_PATH)" -zi: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ - $(obj)/zImage System.map "$(INSTALL_PATH)" - -i: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ - $(obj)/Image System.map "$(INSTALL_PATH)" - subdir- := bootp compressed dts diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index 0714e0334e33..86b2f5d28240 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -3,11 +3,7 @@ bswapsdi2.S font.c lib1funcs.S hyp-stub.S -piggy.gzip -piggy.lzo -piggy.lzma -piggy.xzkern -piggy.lz4 +piggy_data vmlinux vmlinux.lds diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 7a6a58ef8aaf..d50430c40045 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -66,11 +66,11 @@ endif CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)" -suffix_$(CONFIG_KERNEL_GZIP) = gzip -suffix_$(CONFIG_KERNEL_LZO) = lzo -suffix_$(CONFIG_KERNEL_LZMA) = lzma -suffix_$(CONFIG_KERNEL_XZ) = xzkern -suffix_$(CONFIG_KERNEL_LZ4) = lz4 +compress-$(CONFIG_KERNEL_GZIP) = gzip +compress-$(CONFIG_KERNEL_LZO) = lzo +compress-$(CONFIG_KERNEL_LZMA) = lzma +compress-$(CONFIG_KERNEL_XZ) = xzkern +compress-$(CONFIG_KERNEL_LZ4) = lz4 # Borrowed libfdt files for the ATAG compatibility mode @@ -89,15 +89,12 @@ ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) OBJS += $(libfdt_objs) atags_to_fdt.o endif -targets := vmlinux vmlinux.lds \ - piggy.$(suffix_y) piggy.$(suffix_y).o \ - lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \ - bswapsdi2.S font.o font.c head.o misc.o $(OBJS) +targets := vmlinux vmlinux.lds piggy_data piggy.o \ + lib1funcs.o ashldi3.o bswapsdi2.o \ + head.o $(OBJS) -# Make sure files are removed during clean -extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \ - lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \ - hyp-stub.S +clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \ + $(libfdt) $(libfdt_hdrs) hyp-stub.S KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING @@ -178,22 +175,24 @@ fi efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a -$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \ $(bswapsdi2) $(efi-obj-y) FORCE @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) -$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE - $(call if_changed,$(suffix_y)) +$(obj)/piggy_data: $(obj)/../Image FORCE + $(call if_changed,$(compress-y)) -$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE +$(obj)/piggy.o: $(obj)/piggy_data CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) +AFLAGS_hyp-stub.o := -Wa,-march=armv7-a + $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S $(call cmd,shipped) diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.S index a68adf91a165..f72088495f43 100644 --- a/arch/arm/boot/compressed/piggy.gzip.S +++ b/arch/arm/boot/compressed/piggy.S @@ -1,6 +1,6 @@ .section .piggydata,#alloc .globl input_data input_data: - .incbin "arch/arm/boot/compressed/piggy.gzip" + .incbin "arch/arm/boot/compressed/piggy_data" .globl input_data_end input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lz4.S b/arch/arm/boot/compressed/piggy.lz4.S deleted file mode 100644 index 3d9a575618a3..000000000000 --- a/arch/arm/boot/compressed/piggy.lz4.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lz4" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S deleted file mode 100644 index d7e69cffbc0a..000000000000 --- a/arch/arm/boot/compressed/piggy.lzma.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lzma" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.lzo.S deleted file mode 100644 index a425ad95959a..000000000000 --- a/arch/arm/boot/compressed/piggy.lzo.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lzo" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S deleted file mode 100644 index 5703f300d027..000000000000 --- a/arch/arm/boot/compressed/piggy.xzkern.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.xzkern" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c index 36e53ef9200f..689467448736 100644 --- a/arch/arm/boot/compressed/string.c +++ b/arch/arm/boot/compressed/string.c @@ -65,6 +65,15 @@ size_t strlen(const char *s) return sc - s; } +size_t strnlen(const char *s, size_t count) +{ + const char *sc; + + for (sc = s; count-- && *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} + int memcmp(const void *cs, const void *ct, size_t count) { const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index f3db13d2d90e..0cc150b87b86 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -285,8 +285,10 @@ }; }; + +/include/ "tps65217.dtsi" + &tps { - compatible = "ti,tps65217"; /* * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only * mode") at poweroff. Most BeagleBone versions do not support RTC-only @@ -307,17 +309,12 @@ ti,pmic-shutdown-controller; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; regulator-name = "vdds_dpr"; regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -327,7 +324,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -337,25 +333,21 @@ }; ldo1_reg: regulator@3 { - reg = <3>; regulator-name = "vio,vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; regulator-name = "vdd_1v8"; regulator-always-on; }; ldo4_reg: regulator@6 { - reg = <6>; regulator-name = "vdd_3v3a"; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index fda457b07e15..857d9894103a 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -128,21 +128,16 @@ }; -&tps { - compatible = "ti,tps65217"; +/include/ "tps65217.dtsi" +&tps { regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; regulator-name = "vdds_dpr"; regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -152,7 +147,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -162,28 +156,24 @@ }; ldo1_reg: regulator@3 { - reg = <3>; regulator-name = "vio,vrtc,vdds"; regulator-boot-on; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; regulator-name = "vdd_3v3aux"; regulator-boot-on; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; regulator-name = "vdd_1v8"; regulator-boot-on; regulator-always-on; }; ldo4_reg: regulator@6 { - reg = <6>; regulator-name = "vdd_3v3d"; regulator-boot-on; regulator-always-on; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 77559a1ded60..f313999c503e 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -375,15 +375,11 @@ wp-gpios = <&gpio3 18 0>; }; -&tps { - compatible = "ti,tps65217"; +#include "tps65217.dtsi" +&tps { regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* +1.5V voltage with ±4% tolerance */ regulator-min-microvolt = <1450000>; regulator-max-microvolt = <1550000>; @@ -392,7 +388,6 @@ }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <915000>; @@ -402,7 +397,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <915000>; @@ -412,7 +406,6 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* +1.8V voltage with ±4% tolerance */ regulator-min-microvolt = <1750000>; regulator-max-microvolt = <1870000>; @@ -421,7 +414,6 @@ }; ldo2_reg: regulator@4 { - reg = <4>; /* +3.3V voltage with ±4% tolerance */ regulator-min-microvolt = <3175000>; regulator-max-microvolt = <3430000>; @@ -430,7 +422,6 @@ }; ldo3_reg: regulator@5 { - reg = <5>; /* +1.8V voltage with ±4% tolerance */ regulator-min-microvolt = <1750000>; regulator-max-microvolt = <1870000>; @@ -439,7 +430,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* +3.3V voltage with ±4% tolerance */ regulator-min-microvolt = <3175000>; regulator-max-microvolt = <3430000>; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 471a3a70ea1f..8867aaaec54d 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -420,9 +420,9 @@ vin-supply = <&vbat>; }; -&tps { - compatible = "ti,tps65217"; +/include/ "tps65217.dtsi" +&tps { backlight { isel = <1>; /* ISET1 */ fdim = <200>; /* TPS65217_BL_FDIM_200HZ */ @@ -430,17 +430,12 @@ }; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* VDD_1V8 system supply */ regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -450,7 +445,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -460,21 +454,18 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* VRTC 1.8V always-on supply */ regulator-name = "vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; /* 3.3V rail */ regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; /* VDD_3V3A 3.3V rail */ regulator-name = "vdd_3v3a"; regulator-min-microvolt = <3300000>; @@ -482,7 +473,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* VDD_3V3B 3.3V rail */ regulator-name = "vdd_3v3b"; regulator-always-on; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 1b5b044fcd91..865de8500f1c 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -46,7 +46,7 @@ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>; debounce-interval = <1000>; - gpio-key,wakeup; + wakeup-source; }; front_button { @@ -54,7 +54,7 @@ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; linux,code = <KEY_FRONT>; debounce-interval = <1000>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index d38edfa53bb9..3303c281697b 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -375,19 +375,16 @@ pinctrl-0 = <&uart4_pins>; }; +#include "tps65217.dtsi" + &tps { - compatible = "ti,tps65217"; ti,pmic-shutdown-controller; interrupt-parent = <&intc>; interrupts = <7>; /* NNMI */ regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* VDDS_DDR */ regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; @@ -395,7 +392,6 @@ }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -405,7 +401,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -415,7 +410,6 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* VRTC / VIO / VDDS*/ regulator-always-on; regulator-min-microvolt = <1800000>; @@ -423,7 +417,6 @@ }; ldo2_reg: regulator@4 { - reg = <4>; /* VDD_3V3AUX */ regulator-always-on; regulator-min-microvolt = <3300000>; @@ -431,7 +424,6 @@ }; ldo3_reg: regulator@5 { - reg = <5>; /* VDD_1V8 */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -439,7 +431,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* VDD_3V3A */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 36c0fa6c362a..592e65c3a4e0 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -173,6 +173,8 @@ sound0_master: simple-audio-card,codec { sound-dai = <&tlv320aic3104>; + assigned-clocks = <&clkoutmux2_clk_mux>; + assigned-clock-parents = <&sys_clk2_dclk_div>; clocks = <&clkout2_clk>; }; }; @@ -560,8 +562,7 @@ extcon_usb2: tps659038_usb { compatible = "ti,palmas-usb-vid"; ti,enable-vbus-detection; - ti,enable-id-detection; - id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; }; }; @@ -796,6 +797,8 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mcasp3_pins_default>; pinctrl-1 = <&mcasp3_pins_sleep>; + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&sys_clkin2>; status = "okay"; op-mode = <0>; /* MCASP_IIS_MODE */ diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 8d93882dc8d5..1c06cb76da07 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -545,7 +545,7 @@ ti,debounce-tol = /bits/ 16 <10>; ti,debounce-rep = /bits/ 16 <1>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index acd5b1519edb..5f9451be21ff 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -61,7 +61,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi1: spi@10680 { @@ -138,12 +139,18 @@ status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; + bm,pool-short = <3>; }; ethernet@34000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; ethernet@70000 { @@ -157,6 +164,13 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <3>; + }; + + bm@c8000 { + status = "okay"; }; nfc: flash@d0000 { @@ -178,6 +192,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index c6e180eb3b11..c60206efb583 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -78,6 +78,9 @@ internal-regs { ethernet@30000 { phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <1>; status = "okay"; fixed-link { @@ -88,6 +91,9 @@ ethernet@34000 { phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + bm,pool-short = <1>; status = "okay"; fixed-link { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index ff47af57f091..ea93ed727030 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -66,7 +66,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi@10600 { @@ -99,6 +100,9 @@ status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; usb@58000 { @@ -109,6 +113,9 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; }; mdio@72004 { @@ -129,6 +136,10 @@ status = "okay"; }; + bm@c8000 { + status = "okay"; + }; + flash@d0000 { status = "okay"; num-cs = <1>; @@ -169,6 +180,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index cd316021d6ce..466b01eb1038 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -60,7 +60,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi@10600 { @@ -133,6 +134,9 @@ status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; /* CON4 */ @@ -152,6 +156,9 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; }; @@ -186,6 +193,10 @@ }; }; + bm@c8000 { + status = "okay"; + }; + sata@e0000 { pinctrl-names = "default"; pinctrl-0 = <&sata2_pins>, <&sata3_pins>; @@ -240,6 +251,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 3f792a563c05..8c9842237b60 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -58,7 +58,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { ethernet@70000 { @@ -66,6 +67,9 @@ pinctrl-names = "default"; phy = <&phy_dedicated>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; status = "okay"; }; @@ -110,6 +114,15 @@ pinctrl-names = "default"; status = "okay"; }; + + bm@c8000 { + status = "okay"; + }; }; + + bm-bppi { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index e8b7f6726772..066a8f06405c 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -540,6 +540,14 @@ status = "disabled"; }; + bm: bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; @@ -618,6 +626,17 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 23fc670c0427..5c21b236721f 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -70,8 +70,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index f774101416a5..cca366590561 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -76,8 +76,9 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -181,21 +182,33 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + }; + + bm@c0000 { + status = "okay"; }; mvsdio@d4000 { @@ -230,5 +243,9 @@ }; }; }; + + bm-bppi { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 4878d7353069..061f4237760e 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -95,8 +95,9 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -196,21 +197,29 @@ status = "okay"; phy = <&phy0>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; }; /* Front-side USB slot */ @@ -235,6 +244,10 @@ }; }; + bm@c0000 { + status = "okay"; + }; + nand@d0000 { status = "okay"; num-cs = <1>; @@ -243,5 +256,9 @@ nand-on-flash-bbt; }; }; + + bm-bppi { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index fb9e1bbf2338..8af463f26ea1 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -65,8 +65,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 6e9820e141f8..b89e6cf1271a 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -70,8 +70,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 6ab33837a2b6..6522b04f4a8e 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -68,8 +68,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 62175a8848bc..d19f44c70925 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -64,8 +64,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index a5db17782e08..ed3b889d16ce 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -65,9 +65,10 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000 + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -176,21 +177,29 @@ status = "okay"; phy = <&phy0>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; }; i2c@11000 { status = "okay"; @@ -219,6 +228,14 @@ usb@51000 { status = "okay"; }; + + bm@c0000 { + status = "okay"; + }; + }; + + bm-bppi { + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 2391b11dc546..d17dab0a6f51 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -78,8 +78,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index be23196829bb..553349c07f28 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -253,6 +253,14 @@ marvell,crypto-sram-size = <0x800>; }; + bm: bm@c0000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc0000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 @@ -291,6 +299,17 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c4d9175b90dc..f82aa44c3cee 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1500,6 +1500,16 @@ 0x48485200 0x2E00>; #address-cells = <1>; #size-cells = <1>; + + /* + * Do not allow gating of cpsw clock as workaround + * for errata i877. Keeping internal clock disabled + * causes the device switching characteristics + * to degrade over time and eventually fail to meet + * the data manual delay time/skew specs. + */ + ti,no-idle; + /* * rx_thresh_pend * rx_pend diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 1c6c07538a78..302d1168f424 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -569,7 +569,7 @@ }; }; - iio_hwmon { + iio-hwmon { compatible = "iio-hwmon"; io-channels = <&lradc 8>; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index fae7b9069fc4..f637ec900cc8 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1256,7 +1256,7 @@ }; }; - iio_hwmon { + iio-hwmon { compatible = "iio-hwmon"; io-channels = <&lradc 8>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4f6ae921656f..f74d3db4846d 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -896,7 +896,6 @@ #size-cells = <1>; reg = <0x2100000 0x10000>; ranges = <0 0x2100000 0x10000>; - interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_CAAM_MEM>, <&clks IMX6QDL_CLK_CAAM_ACLK>, <&clks IMX6QDL_CLK_CAAM_IPG>, diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index bf4143c6cb8f..b84af3da8c84 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -14,7 +14,7 @@ #include "kirkwood-synology.dtsi" / { - model = "Synology DS111"; + model = "Synology DS112"; compatible = "synology,ds111", "marvell,kirkwood"; memory { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 2c84ca236473..ecf12dc22595 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -457,6 +457,18 @@ reg = <0x0 0x2d24000 0x0 0x4000>; }; + ptp_clock@2d10e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x0 0x2d10e00 0x0 0xb0>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xaaaaaaab>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <499999999>; + }; + enet0: ethernet@2d10000 { compatible = "fsl,etsec2"; device_type = "network"; diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mt2701-pinfunc.h new file mode 100644 index 000000000000..e24ebc8d928e --- /dev/null +++ b/arch/arm/boot/dts/mt2701-pinfunc.h @@ -0,0 +1,735 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Biao Huang <biao.huang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DTS_MT2701_PINFUNC_H +#define __DTS_MT2701_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(0) | 1) +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDI (MTK_PIN_NO(0) | 2) + +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(1) | 1) +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDO (MTK_PIN_NO(1) | 2) + +#define MT2701_PIN_2_PWRAP_INT__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT2701_PIN_2_PWRAP_INT__FUNC_PWRAP_INT (MTK_PIN_NO(2) | 1) + +#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(3) | 1) + +#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(4) | 1) + +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_PWRAP_SPICK2_I (MTK_PIN_NO(5) | 1) +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 5) + +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_PWRAP_SPICS2_B_I (MTK_PIN_NO(6) | 1) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_ANT_SEL0 (MTK_PIN_NO(6) | 5) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_DBG_MON_A_0 (MTK_PIN_NO(6) | 7) + +#define MT2701_PIN_7_SPI1_CSN__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS (MTK_PIN_NO(7) | 1) +#define MT2701_PIN_7_SPI1_CSN__FUNC_KCOL0 (MTK_PIN_NO(7) | 4) +#define MT2701_PIN_7_SPI1_CSN__FUNC_DBG_MON_B_12 (MTK_PIN_NO(7) | 7) + +#define MT2701_PIN_8_SPI1_MI__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI (MTK_PIN_NO(8) | 1) +#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MO (MTK_PIN_NO(8) | 2) +#define MT2701_PIN_8_SPI1_MI__FUNC_KCOL1 (MTK_PIN_NO(8) | 4) +#define MT2701_PIN_8_SPI1_MI__FUNC_DBG_MON_B_13 (MTK_PIN_NO(8) | 7) + +#define MT2701_PIN_9_SPI1_MO__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO (MTK_PIN_NO(9) | 1) +#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MI (MTK_PIN_NO(9) | 2) +#define MT2701_PIN_9_SPI1_MO__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3) +#define MT2701_PIN_9_SPI1_MO__FUNC_KCOL2 (MTK_PIN_NO(9) | 4) +#define MT2701_PIN_9_SPI1_MO__FUNC_DBG_MON_B_14 (MTK_PIN_NO(9) | 7) + +#define MT2701_PIN_10_RTC32K_CK__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT2701_PIN_10_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(10) | 1) + +#define MT2701_PIN_11_WATCHDOG__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT2701_PIN_11_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(11) | 1) + +#define MT2701_PIN_12_SRCLKENA__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT2701_PIN_12_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(12) | 1) + +#define MT2701_PIN_13_SRCLKENAI__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT2701_PIN_13_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(13) | 1) + +#define MT2701_PIN_14_URXD2__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT2701_PIN_14_URXD2__FUNC_URXD2 (MTK_PIN_NO(14) | 1) +#define MT2701_PIN_14_URXD2__FUNC_UTXD2 (MTK_PIN_NO(14) | 2) +#define MT2701_PIN_14_URXD2__FUNC_SRCCLKENAI2 (MTK_PIN_NO(14) | 5) +#define MT2701_PIN_14_URXD2__FUNC_DBG_MON_B_30 (MTK_PIN_NO(14) | 7) + +#define MT2701_PIN_15_UTXD2__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT2701_PIN_15_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(15) | 1) +#define MT2701_PIN_15_UTXD2__FUNC_URXD2 (MTK_PIN_NO(15) | 2) +#define MT2701_PIN_15_UTXD2__FUNC_DBG_MON_B_31 (MTK_PIN_NO(15) | 7) + +#define MT2701_PIN_18_PCM_CLK__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT2701_PIN_18_PCM_CLK__FUNC_PCM_CLK0 (MTK_PIN_NO(18) | 1) +#define MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(18) | 2) +#define MT2701_PIN_18_PCM_CLK__FUNC_MM_TEST_CK (MTK_PIN_NO(18) | 4) +#define MT2701_PIN_18_PCM_CLK__FUNC_CONN_DSP_JCK (MTK_PIN_NO(18) | 5) +#define MT2701_PIN_18_PCM_CLK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(18) | 6) +#define MT2701_PIN_18_PCM_CLK__FUNC_DBG_MON_A_3 (MTK_PIN_NO(18) | 7) + +#define MT2701_PIN_19_PCM_SYNC__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT2701_PIN_19_PCM_SYNC__FUNC_PCM_SYNC (MTK_PIN_NO(19) | 1) +#define MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(19) | 2) +#define MT2701_PIN_19_PCM_SYNC__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(19) | 5) +#define MT2701_PIN_19_PCM_SYNC__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(19) | 6) +#define MT2701_PIN_19_PCM_SYNC__FUNC_DBG_MON_A_5 (MTK_PIN_NO(19) | 7) + +#define MT2701_PIN_20_PCM_RX__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT2701_PIN_20_PCM_RX__FUNC_PCM_RX (MTK_PIN_NO(20) | 1) +#define MT2701_PIN_20_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(20) | 2) +#define MT2701_PIN_20_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(20) | 3) +#define MT2701_PIN_20_PCM_RX__FUNC_PCM_TX (MTK_PIN_NO(20) | 4) +#define MT2701_PIN_20_PCM_RX__FUNC_CONN_DSP_JDI (MTK_PIN_NO(20) | 5) +#define MT2701_PIN_20_PCM_RX__FUNC_WCN_PCM_RX (MTK_PIN_NO(20) | 6) +#define MT2701_PIN_20_PCM_RX__FUNC_DBG_MON_A_4 (MTK_PIN_NO(20) | 7) + +#define MT2701_PIN_21_PCM_TX__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT2701_PIN_21_PCM_TX__FUNC_PCM_TX (MTK_PIN_NO(21) | 1) +#define MT2701_PIN_21_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(21) | 2) +#define MT2701_PIN_21_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(21) | 3) +#define MT2701_PIN_21_PCM_TX__FUNC_PCM_RX (MTK_PIN_NO(21) | 4) +#define MT2701_PIN_21_PCM_TX__FUNC_CONN_DSP_JMS (MTK_PIN_NO(21) | 5) +#define MT2701_PIN_21_PCM_TX__FUNC_WCN_PCM_TX (MTK_PIN_NO(21) | 6) +#define MT2701_PIN_21_PCM_TX__FUNC_DBG_MON_A_2 (MTK_PIN_NO(21) | 7) + +#define MT2701_PIN_22_EINT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT2701_PIN_22_EINT0__FUNC_UCTS0 (MTK_PIN_NO(22) | 1) +#define MT2701_PIN_22_EINT0__FUNC_KCOL3 (MTK_PIN_NO(22) | 3) +#define MT2701_PIN_22_EINT0__FUNC_CONN_DSP_JDO (MTK_PIN_NO(22) | 4) +#define MT2701_PIN_22_EINT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 5) +#define MT2701_PIN_22_EINT0__FUNC_DBG_MON_A_30 (MTK_PIN_NO(22) | 7) +#define MT2701_PIN_22_EINT0__FUNC_PCIE0_PERST_N (MTK_PIN_NO(22) | 10) + +#define MT2701_PIN_23_EINT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT2701_PIN_23_EINT1__FUNC_URTS0 (MTK_PIN_NO(23) | 1) +#define MT2701_PIN_23_EINT1__FUNC_KCOL2 (MTK_PIN_NO(23) | 3) +#define MT2701_PIN_23_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(23) | 4) +#define MT2701_PIN_23_EINT1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5) +#define MT2701_PIN_23_EINT1__FUNC_DBG_MON_A_29 (MTK_PIN_NO(23) | 7) +#define MT2701_PIN_23_EINT1__FUNC_PCIE1_PERST_N (MTK_PIN_NO(23) | 10) + +#define MT2701_PIN_24_EINT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT2701_PIN_24_EINT2__FUNC_UCTS1 (MTK_PIN_NO(24) | 1) +#define MT2701_PIN_24_EINT2__FUNC_KCOL1 (MTK_PIN_NO(24) | 3) +#define MT2701_PIN_24_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(24) | 4) +#define MT2701_PIN_24_EINT2__FUNC_DBG_MON_A_28 (MTK_PIN_NO(24) | 7) +#define MT2701_PIN_24_EINT2__FUNC_PCIE2_PERST_N (MTK_PIN_NO(24) | 10) + +#define MT2701_PIN_25_EINT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT2701_PIN_25_EINT3__FUNC_URTS1 (MTK_PIN_NO(25) | 1) +#define MT2701_PIN_25_EINT3__FUNC_KCOL0 (MTK_PIN_NO(25) | 3) +#define MT2701_PIN_25_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(25) | 4) +#define MT2701_PIN_25_EINT3__FUNC_DBG_MON_A_27 (MTK_PIN_NO(25) | 7) + +#define MT2701_PIN_26_EINT4__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT2701_PIN_26_EINT4__FUNC_UCTS3 (MTK_PIN_NO(26) | 1) +#define MT2701_PIN_26_EINT4__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(26) | 2) +#define MT2701_PIN_26_EINT4__FUNC_KROW3 (MTK_PIN_NO(26) | 3) +#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_TCK0 (MTK_PIN_NO(26) | 4) +#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(26) | 5) +#define MT2701_PIN_26_EINT4__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(26) | 6) +#define MT2701_PIN_26_EINT4__FUNC_DBG_MON_A_26 (MTK_PIN_NO(26) | 7) + +#define MT2701_PIN_27_EINT5__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT2701_PIN_27_EINT5__FUNC_URTS3 (MTK_PIN_NO(27) | 1) +#define MT2701_PIN_27_EINT5__FUNC_IDDIG_P1 (MTK_PIN_NO(27) | 2) +#define MT2701_PIN_27_EINT5__FUNC_KROW2 (MTK_PIN_NO(27) | 3) +#define MT2701_PIN_27_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(27) | 4) +#define MT2701_PIN_27_EINT5__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(27) | 6) +#define MT2701_PIN_27_EINT5__FUNC_DBG_MON_A_25 (MTK_PIN_NO(27) | 7) + +#define MT2701_PIN_28_EINT6__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT2701_PIN_28_EINT6__FUNC_DRV_VBUS (MTK_PIN_NO(28) | 1) +#define MT2701_PIN_28_EINT6__FUNC_KROW1 (MTK_PIN_NO(28) | 3) +#define MT2701_PIN_28_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(28) | 4) +#define MT2701_PIN_28_EINT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(28) | 6) +#define MT2701_PIN_28_EINT6__FUNC_DBG_MON_A_24 (MTK_PIN_NO(28) | 7) + +#define MT2701_PIN_29_EINT7__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT2701_PIN_29_EINT7__FUNC_IDDIG (MTK_PIN_NO(29) | 1) +#define MT2701_PIN_29_EINT7__FUNC_MSDC1_WP (MTK_PIN_NO(29) | 2) +#define MT2701_PIN_29_EINT7__FUNC_KROW0 (MTK_PIN_NO(29) | 3) +#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(29) | 4) +#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(29) | 5) +#define MT2701_PIN_29_EINT7__FUNC_DBG_MON_A_23 (MTK_PIN_NO(29) | 7) +#define MT2701_PIN_29_EINT7__FUNC_PCIE2_PERST_N (MTK_PIN_NO(29) | 14) + +#define MT2701_PIN_33_I2S1_DATA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA (MTK_PIN_NO(33) | 1) +#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA_BYPS (MTK_PIN_NO(33) | 2) +#define MT2701_PIN_33_I2S1_DATA__FUNC_PCM_TX (MTK_PIN_NO(33) | 3) +#define MT2701_PIN_33_I2S1_DATA__FUNC_IMG_TEST_CK (MTK_PIN_NO(33) | 4) +#define MT2701_PIN_33_I2S1_DATA__FUNC_G1_RXD0 (MTK_PIN_NO(33) | 5) +#define MT2701_PIN_33_I2S1_DATA__FUNC_WCN_PCM_TX (MTK_PIN_NO(33) | 6) +#define MT2701_PIN_33_I2S1_DATA__FUNC_DBG_MON_B_8 (MTK_PIN_NO(33) | 7) + +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN (MTK_PIN_NO(34) | 1) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(34) | 3) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_VDEC_TEST_CK (MTK_PIN_NO(34) | 4) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_G1_RXD1 (MTK_PIN_NO(34) | 5) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_WCN_PCM_RX (MTK_PIN_NO(34) | 6) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_DBG_MON_B_7 (MTK_PIN_NO(34) | 7) + +#define MT2701_PIN_35_I2S1_BCK__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(35) | 1) +#define MT2701_PIN_35_I2S1_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(35) | 3) +#define MT2701_PIN_35_I2S1_BCK__FUNC_G1_RXD2 (MTK_PIN_NO(35) | 5) +#define MT2701_PIN_35_I2S1_BCK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(35) | 6) +#define MT2701_PIN_35_I2S1_BCK__FUNC_DBG_MON_B_9 (MTK_PIN_NO(35) | 7) + +#define MT2701_PIN_36_I2S1_LRCK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK (MTK_PIN_NO(36) | 1) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(36) | 3) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_G1_RXD3 (MTK_PIN_NO(36) | 5) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(36) | 6) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_DBG_MON_B_10 (MTK_PIN_NO(36) | 7) + +#define MT2701_PIN_37_I2S1_MCLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK (MTK_PIN_NO(37) | 1) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_G1_RXDV (MTK_PIN_NO(37) | 5) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_DBG_MON_B_11 (MTK_PIN_NO(37) | 7) + +#define MT2701_PIN_39_JTMS__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT2701_PIN_39_JTMS__FUNC_JTMS (MTK_PIN_NO(39) | 1) +#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(39) | 2) +#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(39) | 3) +#define MT2701_PIN_39_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(39) | 4) + +#define MT2701_PIN_40_JTCK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT2701_PIN_40_JTCK__FUNC_JTCK (MTK_PIN_NO(40) | 1) +#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_TCK1 (MTK_PIN_NO(40) | 2) +#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(40) | 3) +#define MT2701_PIN_40_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(40) | 4) + +#define MT2701_PIN_41_JTDI__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT2701_PIN_41_JTDI__FUNC_JTDI (MTK_PIN_NO(41) | 1) +#define MT2701_PIN_41_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(41) | 2) +#define MT2701_PIN_41_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(41) | 4) + +#define MT2701_PIN_42_JTDO__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT2701_PIN_42_JTDO__FUNC_JTDO (MTK_PIN_NO(42) | 1) +#define MT2701_PIN_42_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(42) | 2) +#define MT2701_PIN_42_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(42) | 4) + +#define MT2701_PIN_43_NCLE__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT2701_PIN_43_NCLE__FUNC_NCLE (MTK_PIN_NO(43) | 1) +#define MT2701_PIN_43_NCLE__FUNC_EXT_XCS2 (MTK_PIN_NO(43) | 2) + +#define MT2701_PIN_44_NCEB1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT2701_PIN_44_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(44) | 1) +#define MT2701_PIN_44_NCEB1__FUNC_IDDIG (MTK_PIN_NO(44) | 2) + +#define MT2701_PIN_45_NCEB0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT2701_PIN_45_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(45) | 1) +#define MT2701_PIN_45_NCEB0__FUNC_DRV_VBUS (MTK_PIN_NO(45) | 2) + +#define MT2701_PIN_46_IR__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT2701_PIN_46_IR__FUNC_IR (MTK_PIN_NO(46) | 1) + +#define MT2701_PIN_47_NREB__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT2701_PIN_47_NREB__FUNC_NREB (MTK_PIN_NO(47) | 1) +#define MT2701_PIN_47_NREB__FUNC_IDDIG_P1 (MTK_PIN_NO(47) | 2) + +#define MT2701_PIN_48_NRNB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT2701_PIN_48_NRNB__FUNC_NRNB (MTK_PIN_NO(48) | 1) +#define MT2701_PIN_48_NRNB__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(48) | 2) + +#define MT2701_PIN_49_I2S0_DATA__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA (MTK_PIN_NO(49) | 1) +#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA_BYPS (MTK_PIN_NO(49) | 2) +#define MT2701_PIN_49_I2S0_DATA__FUNC_PCM_TX (MTK_PIN_NO(49) | 3) +#define MT2701_PIN_49_I2S0_DATA__FUNC_WCN_I2S_DO (MTK_PIN_NO(49) | 6) +#define MT2701_PIN_49_I2S0_DATA__FUNC_DBG_MON_B_3 (MTK_PIN_NO(49) | 7) + +#define MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS (MTK_PIN_NO(53) | 1) +#define MT2701_PIN_53_SPI0_CSN__FUNC_SPDIF (MTK_PIN_NO(53) | 3) +#define MT2701_PIN_53_SPI0_CSN__FUNC_ADC_CK (MTK_PIN_NO(53) | 4) +#define MT2701_PIN_53_SPI0_CSN__FUNC_PWM1 (MTK_PIN_NO(53) | 5) +#define MT2701_PIN_53_SPI0_CSN__FUNC_DBG_MON_A_7 (MTK_PIN_NO(53) | 7) + +#define MT2701_PIN_54_SPI0_CK__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK (MTK_PIN_NO(54) | 1) +#define MT2701_PIN_54_SPI0_CK__FUNC_SPDIF_IN1 (MTK_PIN_NO(54) | 3) +#define MT2701_PIN_54_SPI0_CK__FUNC_ADC_DAT_IN (MTK_PIN_NO(54) | 4) +#define MT2701_PIN_54_SPI0_CK__FUNC_DBG_MON_A_10 (MTK_PIN_NO(54) | 7) + +#define MT2701_PIN_55_SPI0_MI__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI (MTK_PIN_NO(55) | 1) +#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MO (MTK_PIN_NO(55) | 2) +#define MT2701_PIN_55_SPI0_MI__FUNC_MSDC1_WP (MTK_PIN_NO(55) | 3) +#define MT2701_PIN_55_SPI0_MI__FUNC_ADC_WS (MTK_PIN_NO(55) | 4) +#define MT2701_PIN_55_SPI0_MI__FUNC_PWM2 (MTK_PIN_NO(55) | 5) +#define MT2701_PIN_55_SPI0_MI__FUNC_DBG_MON_A_8 (MTK_PIN_NO(55) | 7) + +#define MT2701_PIN_56_SPI0_MO__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO (MTK_PIN_NO(56) | 1) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MI (MTK_PIN_NO(56) | 2) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPDIF_IN0 (MTK_PIN_NO(56) | 3) +#define MT2701_PIN_56_SPI0_MO__FUNC_DBG_MON_A_9 (MTK_PIN_NO(56) | 7) + +#define MT2701_PIN_57_SDA1__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT2701_PIN_57_SDA1__FUNC_SDA1 (MTK_PIN_NO(57) | 1) + +#define MT2701_PIN_58_SCL1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT2701_PIN_58_SCL1__FUNC_SCL1 (MTK_PIN_NO(58) | 1) + +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN (MTK_PIN_NO(72) | 1) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(72) | 3) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PWM0 (MTK_PIN_NO(72) | 4) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DISP_PWM (MTK_PIN_NO(72) | 5) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_WCN_I2S_DI (MTK_PIN_NO(72) | 6) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DBG_MON_B_2 (MTK_PIN_NO(72) | 7) + +#define MT2701_PIN_73_I2S0_LRCK__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(73) | 1) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(73) | 3) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_WCN_I2S_LRCK (MTK_PIN_NO(73) | 6) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_DBG_MON_B_5 (MTK_PIN_NO(73) | 7) + +#define MT2701_PIN_74_I2S0_BCK__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(74) | 1) +#define MT2701_PIN_74_I2S0_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(74) | 3) +#define MT2701_PIN_74_I2S0_BCK__FUNC_WCN_I2S_BCK (MTK_PIN_NO(74) | 6) +#define MT2701_PIN_74_I2S0_BCK__FUNC_DBG_MON_B_4 (MTK_PIN_NO(74) | 7) + +#define MT2701_PIN_75_SDA0__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT2701_PIN_75_SDA0__FUNC_SDA0 (MTK_PIN_NO(75) | 1) + +#define MT2701_PIN_76_SCL0__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT2701_PIN_76_SCL0__FUNC_SCL0 (MTK_PIN_NO(76) | 1) + +#define MT2701_PIN_77_SDA2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT2701_PIN_77_SDA2__FUNC_SDA2 (MTK_PIN_NO(77) | 1) + +#define MT2701_PIN_78_SCL2__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT2701_PIN_78_SCL2__FUNC_SCL2 (MTK_PIN_NO(78) | 1) + +#define MT2701_PIN_79_URXD0__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT2701_PIN_79_URXD0__FUNC_URXD0 (MTK_PIN_NO(79) | 1) +#define MT2701_PIN_79_URXD0__FUNC_UTXD0 (MTK_PIN_NO(79) | 2) +#define MT2701_PIN_79_URXD0__FUNC_ (MTK_PIN_NO(79) | 5) + +#define MT2701_PIN_80_UTXD0__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT2701_PIN_80_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(80) | 1) +#define MT2701_PIN_80_UTXD0__FUNC_URXD0 (MTK_PIN_NO(80) | 2) + +#define MT2701_PIN_81_URXD1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT2701_PIN_81_URXD1__FUNC_URXD1 (MTK_PIN_NO(81) | 1) +#define MT2701_PIN_81_URXD1__FUNC_UTXD1 (MTK_PIN_NO(81) | 2) + +#define MT2701_PIN_82_UTXD1__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT2701_PIN_82_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(82) | 1) +#define MT2701_PIN_82_UTXD1__FUNC_URXD1 (MTK_PIN_NO(82) | 2) + +#define MT2701_PIN_83_LCM_RST__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT2701_PIN_83_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(83) | 1) +#define MT2701_PIN_83_LCM_RST__FUNC_VDAC_CK_XI (MTK_PIN_NO(83) | 2) +#define MT2701_PIN_83_LCM_RST__FUNC_DBG_MON_B_1 (MTK_PIN_NO(83) | 7) + +#define MT2701_PIN_84_DSI_TE__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT2701_PIN_84_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(84) | 1) +#define MT2701_PIN_84_DSI_TE__FUNC_DBG_MON_B_0 (MTK_PIN_NO(84) | 7) + +#define MT2701_PIN_91_TDN3__FUNC_GPI91 (MTK_PIN_NO(91) | 0) +#define MT2701_PIN_91_TDN3__FUNC_TDN3 (MTK_PIN_NO(91) | 1) + +#define MT2701_PIN_92_TDP3__FUNC_GPI92 (MTK_PIN_NO(92) | 0) +#define MT2701_PIN_92_TDP3__FUNC_TDP3 (MTK_PIN_NO(92) | 1) + +#define MT2701_PIN_93_TDN2__FUNC_GPI93 (MTK_PIN_NO(93) | 0) +#define MT2701_PIN_93_TDN2__FUNC_TDN2 (MTK_PIN_NO(93) | 1) + +#define MT2701_PIN_94_TDP2__FUNC_GPI94 (MTK_PIN_NO(94) | 0) +#define MT2701_PIN_94_TDP2__FUNC_TDP2 (MTK_PIN_NO(94) | 1) + +#define MT2701_PIN_95_TCN__FUNC_GPI95 (MTK_PIN_NO(95) | 0) +#define MT2701_PIN_95_TCN__FUNC_TCN (MTK_PIN_NO(95) | 1) + +#define MT2701_PIN_96_TCP__FUNC_GPI96 (MTK_PIN_NO(96) | 0) +#define MT2701_PIN_96_TCP__FUNC_TCP (MTK_PIN_NO(96) | 1) + +#define MT2701_PIN_97_TDN1__FUNC_GPI97 (MTK_PIN_NO(97) | 0) +#define MT2701_PIN_97_TDN1__FUNC_TDN1 (MTK_PIN_NO(97) | 1) + +#define MT2701_PIN_98_TDP1__FUNC_GPI98 (MTK_PIN_NO(98) | 0) +#define MT2701_PIN_98_TDP1__FUNC_TDP1 (MTK_PIN_NO(98) | 1) + +#define MT2701_PIN_99_TDN0__FUNC_GPI99 (MTK_PIN_NO(99) | 0) +#define MT2701_PIN_99_TDN0__FUNC_TDN0 (MTK_PIN_NO(99) | 1) + +#define MT2701_PIN_100_TDP0__FUNC_GPI100 (MTK_PIN_NO(100) | 0) +#define MT2701_PIN_100_TDP0__FUNC_TDP0 (MTK_PIN_NO(100) | 1) + +#define MT2701_PIN_101_SPI2_CSN__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS (MTK_PIN_NO(101) | 1) +#define MT2701_PIN_101_SPI2_CSN__FUNC_SCL3 (MTK_PIN_NO(101) | 3) +#define MT2701_PIN_101_SPI2_CSN__FUNC_KROW0 (MTK_PIN_NO(101) | 4) + +#define MT2701_PIN_102_SPI2_MI__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI (MTK_PIN_NO(102) | 1) +#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MO (MTK_PIN_NO(102) | 2) +#define MT2701_PIN_102_SPI2_MI__FUNC_SDA3 (MTK_PIN_NO(102) | 3) +#define MT2701_PIN_102_SPI2_MI__FUNC_KROW1 (MTK_PIN_NO(102) | 4) + +#define MT2701_PIN_103_SPI2_MO__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO (MTK_PIN_NO(103) | 1) +#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MI (MTK_PIN_NO(103) | 2) +#define MT2701_PIN_103_SPI2_MO__FUNC_SCL3 (MTK_PIN_NO(103) | 3) +#define MT2701_PIN_103_SPI2_MO__FUNC_KROW2 (MTK_PIN_NO(103) | 4) + +#define MT2701_PIN_104_SPI2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK (MTK_PIN_NO(104) | 1) +#define MT2701_PIN_104_SPI2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 3) +#define MT2701_PIN_104_SPI2_CLK__FUNC_KROW3 (MTK_PIN_NO(104) | 4) + +#define MT2701_PIN_105_MSDC1_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(105) | 1) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_ANT_SEL0 (MTK_PIN_NO(105) | 2) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_SDA1 (MTK_PIN_NO(105) | 3) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_I2SOUT_BCK (MTK_PIN_NO(105) | 6) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_DBG_MON_B_27 (MTK_PIN_NO(105) | 7) + +#define MT2701_PIN_106_MSDC1_CLK__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(106) | 1) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_ANT_SEL1 (MTK_PIN_NO(106) | 2) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_SCL1 (MTK_PIN_NO(106) | 3) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_I2SOUT_LRCK (MTK_PIN_NO(106) | 6) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_DBG_MON_B_28 (MTK_PIN_NO(106) | 7) + +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(107) | 1) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(107) | 2) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_UTXD0 (MTK_PIN_NO(107) | 5) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_I2SOUT_DATA_OUT (MTK_PIN_NO(107) | 6) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_DBG_MON_B_26 (MTK_PIN_NO(107) | 7) + +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(108) | 1) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(108) | 2) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM0 (MTK_PIN_NO(108) | 3) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_URXD0 (MTK_PIN_NO(108) | 5) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM1 (MTK_PIN_NO(108) | 6) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_DBG_MON_B_25 (MTK_PIN_NO(108) | 7) + +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(109) | 1) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_ANT_SEL4 (MTK_PIN_NO(109) | 2) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_SDA2 (MTK_PIN_NO(109) | 3) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_UTXD1 (MTK_PIN_NO(109) | 5) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_PWM2 (MTK_PIN_NO(109) | 6) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_DBG_MON_B_24 (MTK_PIN_NO(109) | 7) + +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(110) | 1) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_ANT_SEL5 (MTK_PIN_NO(110) | 2) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_SCL2 (MTK_PIN_NO(110) | 3) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(110) | 4) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_URXD1 (MTK_PIN_NO(110) | 5) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_PWM3 (MTK_PIN_NO(110) | 6) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_DBG_MON_B_23 (MTK_PIN_NO(110) | 7) + +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(111) | 1) +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(111) | 4) + +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(112) | 1) +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(112) | 4) + +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(113) | 1) +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5 (MTK_PIN_NO(113) | 4) + +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(114) | 1) +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4 (MTK_PIN_NO(114) | 4) + +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(115) | 1) +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8 (MTK_PIN_NO(115) | 4) + +#define MT2701_PIN_116_MSDC0_CMD__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT2701_PIN_116_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(116) | 1) +#define MT2701_PIN_116_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(116) | 4) + +#define MT2701_PIN_117_MSDC0_CLK__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT2701_PIN_117_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(117) | 1) +#define MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(117) | 4) + +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(118) | 1) +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3 (MTK_PIN_NO(118) | 4) + +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(119) | 1) +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2 (MTK_PIN_NO(119) | 4) + +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(120) | 1) +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1 (MTK_PIN_NO(120) | 4) + +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(121) | 1) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0 (MTK_PIN_NO(121) | 4) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(121) | 5) + +#define MT2701_PIN_122_CEC__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT2701_PIN_122_CEC__FUNC_CEC (MTK_PIN_NO(122) | 1) +#define MT2701_PIN_122_CEC__FUNC_SDA2 (MTK_PIN_NO(122) | 4) +#define MT2701_PIN_122_CEC__FUNC_URXD0 (MTK_PIN_NO(122) | 5) + +#define MT2701_PIN_123_HTPLG__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT2701_PIN_123_HTPLG__FUNC_HTPLG (MTK_PIN_NO(123) | 1) +#define MT2701_PIN_123_HTPLG__FUNC_SCL2 (MTK_PIN_NO(123) | 4) +#define MT2701_PIN_123_HTPLG__FUNC_UTXD0 (MTK_PIN_NO(123) | 5) + +#define MT2701_PIN_124_HDMISCK__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT2701_PIN_124_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(124) | 1) +#define MT2701_PIN_124_HDMISCK__FUNC_SDA1 (MTK_PIN_NO(124) | 4) +#define MT2701_PIN_124_HDMISCK__FUNC_PWM3 (MTK_PIN_NO(124) | 5) + +#define MT2701_PIN_125_HDMISD__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT2701_PIN_125_HDMISD__FUNC_HDMISD (MTK_PIN_NO(125) | 1) +#define MT2701_PIN_125_HDMISD__FUNC_SCL1 (MTK_PIN_NO(125) | 4) +#define MT2701_PIN_125_HDMISD__FUNC_PWM4 (MTK_PIN_NO(125) | 5) + +#define MT2701_PIN_126_I2S0_MCLK__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK (MTK_PIN_NO(126) | 1) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_WCN_I2S_MCLK (MTK_PIN_NO(126) | 6) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_DBG_MON_B_6 (MTK_PIN_NO(126) | 7) + +#define MT2701_PIN_199_SPI1_CLK__FUNC_GPIO199 (MTK_PIN_NO(199) | 0) +#define MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK (MTK_PIN_NO(199) | 1) +#define MT2701_PIN_199_SPI1_CLK__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(199) | 3) +#define MT2701_PIN_199_SPI1_CLK__FUNC_KCOL3 (MTK_PIN_NO(199) | 4) +#define MT2701_PIN_199_SPI1_CLK__FUNC_DBG_MON_B_15 (MTK_PIN_NO(199) | 7) + +#define MT2701_PIN_200_SPDIF_OUT__FUNC_GPIO200 (MTK_PIN_NO(200) | 0) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_SPDIF_OUT (MTK_PIN_NO(200) | 1) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_G1_TXD3 (MTK_PIN_NO(200) | 5) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_URXD2 (MTK_PIN_NO(200) | 6) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_DBG_MON_B_16 (MTK_PIN_NO(200) | 7) + +#define MT2701_PIN_201_SPDIF_IN0__FUNC_GPIO201 (MTK_PIN_NO(201) | 0) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_SPDIF_IN0 (MTK_PIN_NO(201) | 1) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_G1_TXEN (MTK_PIN_NO(201) | 5) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_UTXD2 (MTK_PIN_NO(201) | 6) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(201) | 7) + +#define MT2701_PIN_202_SPDIF_IN1__FUNC_GPIO202 (MTK_PIN_NO(202) | 0) +#define MT2701_PIN_202_SPDIF_IN1__FUNC_SPDIF_IN1 (MTK_PIN_NO(202) | 1) + +#define MT2701_PIN_203_PWM0__FUNC_GPIO203 (MTK_PIN_NO(203) | 0) +#define MT2701_PIN_203_PWM0__FUNC_PWM0 (MTK_PIN_NO(203) | 1) +#define MT2701_PIN_203_PWM0__FUNC_DISP_PWM (MTK_PIN_NO(203) | 2) +#define MT2701_PIN_203_PWM0__FUNC_G1_TXD2 (MTK_PIN_NO(203) | 5) +#define MT2701_PIN_203_PWM0__FUNC_DBG_MON_B_18 (MTK_PIN_NO(203) | 7) +#define MT2701_PIN_203_PWM0__FUNC_I2S2_DATA (MTK_PIN_NO(203) | 9) + +#define MT2701_PIN_204_PWM1__FUNC_GPIO204 (MTK_PIN_NO(204) | 0) +#define MT2701_PIN_204_PWM1__FUNC_PWM1 (MTK_PIN_NO(204) | 1) +#define MT2701_PIN_204_PWM1__FUNC_CLKM3 (MTK_PIN_NO(204) | 2) +#define MT2701_PIN_204_PWM1__FUNC_G1_TXD1 (MTK_PIN_NO(204) | 5) +#define MT2701_PIN_204_PWM1__FUNC_DBG_MON_B_19 (MTK_PIN_NO(204) | 7) +#define MT2701_PIN_204_PWM1__FUNC_I2S3_DATA (MTK_PIN_NO(204) | 9) + +#define MT2701_PIN_205_PWM2__FUNC_GPIO205 (MTK_PIN_NO(205) | 0) +#define MT2701_PIN_205_PWM2__FUNC_PWM2 (MTK_PIN_NO(205) | 1) +#define MT2701_PIN_205_PWM2__FUNC_CLKM2 (MTK_PIN_NO(205) | 2) +#define MT2701_PIN_205_PWM2__FUNC_G1_TXD0 (MTK_PIN_NO(205) | 5) +#define MT2701_PIN_205_PWM2__FUNC_DBG_MON_B_20 (MTK_PIN_NO(205) | 7) + +#define MT2701_PIN_206_PWM3__FUNC_GPIO206 (MTK_PIN_NO(206) | 0) +#define MT2701_PIN_206_PWM3__FUNC_PWM3 (MTK_PIN_NO(206) | 1) +#define MT2701_PIN_206_PWM3__FUNC_CLKM1 (MTK_PIN_NO(206) | 2) +#define MT2701_PIN_206_PWM3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(206) | 3) +#define MT2701_PIN_206_PWM3__FUNC_G1_TXC (MTK_PIN_NO(206) | 5) +#define MT2701_PIN_206_PWM3__FUNC_DBG_MON_B_21 (MTK_PIN_NO(206) | 7) + +#define MT2701_PIN_207_PWM4__FUNC_GPIO207 (MTK_PIN_NO(207) | 0) +#define MT2701_PIN_207_PWM4__FUNC_PWM4 (MTK_PIN_NO(207) | 1) +#define MT2701_PIN_207_PWM4__FUNC_CLKM0 (MTK_PIN_NO(207) | 2) +#define MT2701_PIN_207_PWM4__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(207) | 3) +#define MT2701_PIN_207_PWM4__FUNC_G1_RXC (MTK_PIN_NO(207) | 5) +#define MT2701_PIN_207_PWM4__FUNC_DBG_MON_B_22 (MTK_PIN_NO(207) | 7) + +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(208) | 1) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PWM0 (MTK_PIN_NO(208) | 2) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_ANT_SEL5 (MTK_PIN_NO(208) | 4) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM (MTK_PIN_NO(208) | 5) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(208) | 7) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PCIE0_PERST_N (MTK_PIN_NO(208) | 11) + +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_GPIO209 (MTK_PIN_NO(209) | 0) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(209) | 1) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_MSDC1_WP (MTK_PIN_NO(209) | 2) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PWM1 (MTK_PIN_NO(209) | 5) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_DBG_MON_A_32 (MTK_PIN_NO(209) | 7) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PCIE1_PERST_N (MTK_PIN_NO(209) | 11) + +#define MT2701_PIN_236_EXT_SDIO3__FUNC_GPIO236 (MTK_PIN_NO(236) | 0) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3 (MTK_PIN_NO(236) | 1) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_IDDIG (MTK_PIN_NO(236) | 2) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_DBG_MON_A_1 (MTK_PIN_NO(236) | 7) + +#define MT2701_PIN_237_EXT_SDIO2__FUNC_GPIO237 (MTK_PIN_NO(237) | 0) +#define MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2 (MTK_PIN_NO(237) | 1) +#define MT2701_PIN_237_EXT_SDIO2__FUNC_DRV_VBUS (MTK_PIN_NO(237) | 2) + +#define MT2701_PIN_238_EXT_SDIO1__FUNC_GPIO238 (MTK_PIN_NO(238) | 0) +#define MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1 (MTK_PIN_NO(238) | 1) +#define MT2701_PIN_238_EXT_SDIO1__FUNC_IDDIG_P1 (MTK_PIN_NO(238) | 2) + +#define MT2701_PIN_239_EXT_SDIO0__FUNC_GPIO239 (MTK_PIN_NO(239) | 0) +#define MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0 (MTK_PIN_NO(239) | 1) +#define MT2701_PIN_239_EXT_SDIO0__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(239) | 2) + +#define MT2701_PIN_240_EXT_XCS__FUNC_GPIO240 (MTK_PIN_NO(240) | 0) +#define MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS (MTK_PIN_NO(240) | 1) + +#define MT2701_PIN_241_EXT_SCK__FUNC_GPIO241 (MTK_PIN_NO(241) | 0) +#define MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK (MTK_PIN_NO(241) | 1) + +#define MT2701_PIN_242_URTS2__FUNC_GPIO242 (MTK_PIN_NO(242) | 0) +#define MT2701_PIN_242_URTS2__FUNC_URTS2 (MTK_PIN_NO(242) | 1) +#define MT2701_PIN_242_URTS2__FUNC_UTXD3 (MTK_PIN_NO(242) | 2) +#define MT2701_PIN_242_URTS2__FUNC_URXD3 (MTK_PIN_NO(242) | 3) +#define MT2701_PIN_242_URTS2__FUNC_SCL1 (MTK_PIN_NO(242) | 4) +#define MT2701_PIN_242_URTS2__FUNC_DBG_MON_B_32 (MTK_PIN_NO(242) | 7) + +#define MT2701_PIN_243_UCTS2__FUNC_GPIO243 (MTK_PIN_NO(243) | 0) +#define MT2701_PIN_243_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(243) | 1) +#define MT2701_PIN_243_UCTS2__FUNC_URXD3 (MTK_PIN_NO(243) | 2) +#define MT2701_PIN_243_UCTS2__FUNC_UTXD3 (MTK_PIN_NO(243) | 3) +#define MT2701_PIN_243_UCTS2__FUNC_SDA1 (MTK_PIN_NO(243) | 4) +#define MT2701_PIN_243_UCTS2__FUNC_DBG_MON_A_6 (MTK_PIN_NO(243) | 7) + +#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_GPIO244 (MTK_PIN_NO(244) | 0) +#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_HDMI_SDA_RX (MTK_PIN_NO(244) | 1) + +#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_GPIO245 (MTK_PIN_NO(245) | 0) +#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_HDMI_SCL_RX (MTK_PIN_NO(245) | 1) + +#define MT2701_PIN_246_MHL_SENCE__FUNC_GPIO246 (MTK_PIN_NO(246) | 0) + +#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_GPIO247 (MTK_PIN_NO(247) | 0) +#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_HDMI_HPD_RX (MTK_PIN_NO(247) | 1) + +#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_GPIO248 (MTK_PIN_NO(248) | 0) +#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_HDMI_TESTOUTP_RX (MTK_PIN_NO(248) | 1) + +#define MT2701_PIN_249_MSDC0E_RSTB__FUNC_MSDC0E_RSTB (MTK_PIN_NO(249) | 9) + +#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_MSDC3_DAT7 (MTK_PIN_NO(250) | 9) +#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_PCIE0_CLKREQ_N (MTK_PIN_NO(250) | 14) + +#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_MSDC3_DAT6 (MTK_PIN_NO(251) | 9) +#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(251) | 14) + +#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_MSDC3_DAT5 (MTK_PIN_NO(252) | 9) +#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_PCIE1_CLKREQ_N (MTK_PIN_NO(252) | 14) + +#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_MSDC3_DAT4 (MTK_PIN_NO(253) | 9) +#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(253) | 14) + +#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(254) | 9) +#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_PCIE2_CLKREQ_N (MTK_PIN_NO(254) | 14) + +#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(255) | 9) +#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(255) | 14) + +#define MT2701_PIN_256_MSDC0E_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(256) | 9) + +#define MT2701_PIN_257_MSDC0E_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(257) | 9) + +#define MT2701_PIN_258_MSDC0E_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(258) | 9) + +#define MT2701_PIN_259_MSDC0E_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(259) | 9) + +#define MT2701_PIN_260_MSDC0E_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(260) | 9) + +#define MT2701_PIN_261_MSDC1_INS__FUNC_GPIO261 (MTK_PIN_NO(261) | 0) +#define MT2701_PIN_261_MSDC1_INS__FUNC_MSDC1_INS (MTK_PIN_NO(261) | 1) +#define MT2701_PIN_261_MSDC1_INS__FUNC_DBG_MON_B_29 (MTK_PIN_NO(261) | 7) + +#define MT2701_PIN_262_G2_TXEN__FUNC_GPIO262 (MTK_PIN_NO(262) | 0) +#define MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN (MTK_PIN_NO(262) | 1) + +#define MT2701_PIN_263_G2_TXD3__FUNC_GPIO263 (MTK_PIN_NO(263) | 0) +#define MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3 (MTK_PIN_NO(263) | 1) +#define MT2701_PIN_263_G2_TXD3__FUNC_ANT_SEL5 (MTK_PIN_NO(263) | 6) + +#define MT2701_PIN_264_G2_TXD2__FUNC_GPIO264 (MTK_PIN_NO(264) | 0) +#define MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2 (MTK_PIN_NO(264) | 1) +#define MT2701_PIN_264_G2_TXD2__FUNC_ANT_SEL4 (MTK_PIN_NO(264) | 6) + +#define MT2701_PIN_265_G2_TXD1__FUNC_GPIO265 (MTK_PIN_NO(265) | 0) +#define MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1 (MTK_PIN_NO(265) | 1) +#define MT2701_PIN_265_G2_TXD1__FUNC_ANT_SEL3 (MTK_PIN_NO(265) | 6) + +#define MT2701_PIN_266_G2_TXD0__FUNC_GPIO266 (MTK_PIN_NO(266) | 0) +#define MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0 (MTK_PIN_NO(266) | 1) +#define MT2701_PIN_266_G2_TXD0__FUNC_ANT_SEL2 (MTK_PIN_NO(266) | 6) + +#define MT2701_PIN_267_G2_TXC__FUNC_GPIO267 (MTK_PIN_NO(267) | 0) +#define MT2701_PIN_267_G2_TXC__FUNC_G2_TXC (MTK_PIN_NO(267) | 1) + +#define MT2701_PIN_268_G2_RXC__FUNC_GPIO268 (MTK_PIN_NO(268) | 0) +#define MT2701_PIN_268_G2_RXC__FUNC_G2_RXC (MTK_PIN_NO(268) | 1) + +#define MT2701_PIN_269_G2_RXD0__FUNC_GPIO269 (MTK_PIN_NO(269) | 0) +#define MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0 (MTK_PIN_NO(269) | 1) + +#define MT2701_PIN_270_G2_RXD1__FUNC_GPIO270 (MTK_PIN_NO(270) | 0) +#define MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1 (MTK_PIN_NO(270) | 1) + +#define MT2701_PIN_271_G2_RXD2__FUNC_GPIO271 (MTK_PIN_NO(271) | 0) +#define MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2 (MTK_PIN_NO(271) | 1) + +#define MT2701_PIN_272_G2_RXD3__FUNC_GPIO272 (MTK_PIN_NO(272) | 0) +#define MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1) + +#define MT2701_PIN_274_G2_RXDV__FUNC_GPIO274 (MTK_PIN_NO(274) | 0) +#define MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV (MTK_PIN_NO(274) | 1) + +#define MT2701_PIN_275_MDC__FUNC_GPIO275 (MTK_PIN_NO(275) | 0) +#define MT2701_PIN_275_MDC__FUNC_MDC (MTK_PIN_NO(275) | 1) +#define MT2701_PIN_275_MDC__FUNC_ANT_SEL0 (MTK_PIN_NO(275) | 6) + +#define MT2701_PIN_276_MDIO__FUNC_GPIO276 (MTK_PIN_NO(276) | 0) +#define MT2701_PIN_276_MDIO__FUNC_MDIO (MTK_PIN_NO(276) | 1) +#define MT2701_PIN_276_MDIO__FUNC_ANT_SEL1 (MTK_PIN_NO(276) | 6) + +#define MT2701_PIN_278_JTAG_RESET__FUNC_GPIO278 (MTK_PIN_NO(278) | 0) +#define MT2701_PIN_278_JTAG_RESET__FUNC_JTAG_RESET (MTK_PIN_NO(278) | 1) + +#endif /* __DTS_MT2701_PINFUNC_H */ diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 74d8f7eb5563..e3bdcf819643 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -107,8 +107,8 @@ }; }; - isp1704: isp1704 { - compatible = "nxp,isp1704"; + isp1707: isp1707 { + compatible = "nxp,isp1707"; nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; usb-phy = <&usb2_phy>; }; @@ -618,7 +618,7 @@ ti,termination-current = <100>; ti,resistor-sense = <68>; - ti,usb-charger-detection = <&isp1704>; + ti,usb-charger-detection = <&isp1707>; }; }; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 420788229e6f..aae8a7aceab7 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -228,6 +228,37 @@ }; }; +&devbus_bootcs { + status = "okay"; + devbus,keep-config; + + flash@0 { + compatible = "jedec-flash"; + reg = <0 0x40000>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + header@0 { + reg = <0 0x30000>; + read-only; + }; + + uboot@30000 { + reg = <0x30000 0xF000>; + read-only; + }; + + uboot_env@3F000 { + reg = <0x3F000 0x1000>; + }; + }; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6713b1ea732b..01d239c3eaaa 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -283,7 +283,6 @@ pinctrl-names = "default"; status = "okay"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; }; &usbphy { diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 28a033666017..b3d6ec87f615 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -47,6 +47,20 @@ compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &i2c1 { status = "okay"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 992f9cadbc04..6b4ffc3cd590 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -60,6 +60,20 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &emmc { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index b9567c1e0687..609319ce916a 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -186,6 +186,27 @@ status = "disabled"; }; + emac: ethernet@10200000 { + compatible = "rockchip,rk3036-emac", "snps,arc-emac"; + reg = <0x10200000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + rockchip,grf = <&grf>; + clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref", "macclk"; + /* + * Fix the emac parent clock is DPLL instead of APLL. + * since that will cause some unstable things if the cpufreq + * is working. (e.g: the accurate 50MHz what mac_ref need) + */ + assigned-clocks = <&cru SCLK_MACPLL>; + assigned-clock-parents = <&cru PLL_DPLL>; + max-speed = <100>; + phy-mode = "rmii"; + status = "disabled"; + }; + sdmmc: dwmmc@10214000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; @@ -556,6 +577,24 @@ }; }; + emac { + emac_xfer: emac-xfer { + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */ + <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */ + <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */ + <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */ + <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */ + <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */ + <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */ + <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */ + }; + + emac_mdio: emac-mdio { + rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */ + <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */ + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h index 1afe24629d1f..b0c912feaa2f 100644 --- a/arch/arm/boot/dts/sama5d2-pinfunc.h +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -90,7 +90,7 @@ #define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2) #define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1) #define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2) -#define PIN_PA15 14 +#define PIN_PA15 15 #define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) #define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1) #define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1) diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 3ed4abdaaa9c..15cbc747c242 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -656,6 +656,26 @@ status = "disabled"; }; + eccmgr: eccmgr@ffd08140 { + compatible = "altr,socfpga-ecc-manager"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + l2-ecc@ffd08140 { + compatible = "altr,socfpga-l2-ecc"; + reg = <0xffd08140 0x4>; + interrupts = <0 36 1>, <0 37 1>; + }; + + ocram-ecc@ffd08144 { + compatible = "altr,socfpga-ocram-ecc"; + reg = <0xffd08144 0x4>; + iram = <&ocram>; + interrupts = <0 178 1>, <0 179 1>; + }; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi new file mode 100644 index 000000000000..a63272422d76 --- /dev/null +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65217.pdf + */ + +&tps { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + }; + }; +}; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a9ceb5bac40e..4539f8d909a5 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -629,5 +629,10 @@ status = "disabled"; }; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 16>, <&adc1 16>; + }; }; }; diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c index 2dc6da70ae59..d7ed252708c5 100644 --- a/arch/arm/common/icst.c +++ b/arch/arm/common/icst.c @@ -16,7 +16,7 @@ */ #include <linux/module.h> #include <linux/kernel.h> - +#include <asm/div64.h> #include <asm/hardware/icst.h> /* @@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div); unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco) { - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]); + u64 dividend = p->ref * 2 * (u64)(vco.v + 8); + u32 divisor = (vco.r + 2) * p->s2div[vco.s]; + + do_div(dividend, divisor); + return (unsigned long)dividend; } EXPORT_SYMBOL(icst_hz); @@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq) if (f > p->vco_min && f <= p->vco_max) break; + i++; } while (i < 8); if (i >= 8) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 3d224941b541..fb0a0a4dfea4 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1290,7 +1290,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv) struct sa1111_dev *dev = SA1111_DEV(_dev); struct sa1111_driver *drv = SA1111_DRV(_drv); - return dev->devid & drv->devid; + return !!(dev->devid & drv->devid); } static int sa1111_bus_suspend(struct device *dev, pm_message_t state) diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index e0df333202b8..9ba45ade5f48 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -69,7 +69,7 @@ static void __scoop_gpio_set(struct scoop_dev *sdev, static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); unsigned long flags; spin_lock_irqsave(&sdev->scoop_lock, flags); @@ -81,7 +81,7 @@ static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); /* XXX: I'm unsure, but it seems so */ return !!(ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1))); @@ -90,7 +90,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) static int scoop_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); unsigned long flags; unsigned short gpcr; @@ -108,7 +108,7 @@ static int scoop_gpio_direction_input(struct gpio_chip *chip, static int scoop_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); unsigned long flags; unsigned short gpcr; @@ -224,7 +224,7 @@ static int scoop_probe(struct platform_device *pdev) devptr->gpio.direction_input = scoop_gpio_direction_input; devptr->gpio.direction_output = scoop_gpio_direction_output; - ret = gpiochip_add(&devptr->gpio); + ret = gpiochip_add_data(&devptr->gpio, devptr); if (ret) goto err_gpio; } diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 18c311ae1113..0b9211b2b73b 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -166,7 +166,6 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA1=m diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 4fa94a1f115b..652b7bd9e544 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -95,7 +95,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_NLS=y CONFIG_DEBUG_USER=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index c3058da631da..aa3af0a6b8f7 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -108,7 +108,6 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL_UART_8250=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 9c93f5655248..0b02e4f43c6a 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -158,6 +158,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y +CONFIG_EEPROM_AT24=y CONFIG_SPI=y CONFIG_SPI_S3C24XX=y CONFIG_SPI_SPIDEV=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 1f9ca4737ef6..afb1f62fb05e 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -91,7 +91,7 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_NET_DSA_MV88E6123=y CONFIG_NET_DSA_MV88E6171=y CONFIG_NET_DSA_MV88E6352=y CONFIG_MV643XX_ETH=y diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index af29780accdc..6c4c54037bc4 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -92,7 +92,7 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_NET_DSA_MV88E6123=y CONFIG_NET_DSA_MV88E6171=y CONFIG_NET_DSA_MV88E6352=y CONFIG_MV643XX_ETH=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a7151744b85c..d18d6b42fcf5 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -292,24 +292,23 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m -CONFIG_OMAP5_DSS_HDMI=y -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP5_DSS_HDMI=y +CONFIG_FB_OMAP2_DSS_SDI=y +CONFIG_FB_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m -CONFIG_DISPLAY_ENCODER_TFP410=m -CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m -CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m -CONFIG_DISPLAY_PANEL_DPI=m -CONFIG_DISPLAY_PANEL_DSI_CM=m -CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m -CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m -CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m -CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m -CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m -CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m +CONFIG_FB_OMAP2_ENCODER_TFP410=m +CONFIG_FB_OMAP2_ENCODER_TPD12S015=m +CONFIG_FB_OMAP2_CONNECTOR_DVI=m +CONFIG_FB_OMAP2_CONNECTOR_HDMI=m +CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m +CONFIG_FB_OMAP2_PANEL_DPI=m +CONFIG_FB_OMAP2_PANEL_DSI_CM=m +CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m +CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m +CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m +CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m +CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m +CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 5876ce7af130..6a5bc27538f1 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -86,7 +86,7 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_NET_DSA_MV88E6123=y CONFIG_MV643XX_ETH=y CONFIG_MARVELL_PHY=y # CONFIG_INPUT_MOUSEDEV is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f3142369f594..b3ade552a2a5 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -290,6 +290,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y +CONFIG_EEPROM_AT24=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_SPI_S3C24XX=m diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 4bc870028035..0ada29d568ec 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -214,7 +214,6 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_USER=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=m diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b445a5d56f43..da3c0428507b 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -15,6 +15,7 @@ #include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <linux/module.h> +#include <crypto/xts.h> MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); @@ -152,6 +153,10 @@ static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm); int ret; + ret = xts_check_key(tfm, in_key, key_len); + if (ret) + return ret; + ret = ce_aes_expandkey(&ctx->key1, in_key, key_len / 2); if (!ret) ret = ce_aes_expandkey(&ctx->key2, &in_key[key_len / 2], @@ -364,7 +369,7 @@ static struct crypto_alg aes_algs[] = { { .cra_blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ce_aes_setkey, .encrypt = ecb_encrypt, .decrypt = ecb_decrypt, @@ -441,7 +446,7 @@ static struct crypto_alg aes_algs[] = { { .cra_ablkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ablk_set_key, .encrypt = ablk_encrypt, .decrypt = ablk_decrypt, diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c index 6d685298690e..0511a6cafe24 100644 --- a/arch/arm/crypto/aesbs-glue.c +++ b/arch/arm/crypto/aesbs-glue.c @@ -13,6 +13,7 @@ #include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <linux/module.h> +#include <crypto/xts.h> #include "aes_glue.h" @@ -89,6 +90,11 @@ static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, { struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm); int bits = key_len * 4; + int err; + + err = xts_check_key(tfm, in_key, key_len); + if (err) + return err; if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) { tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 16da6380eb85..55e0e3ea9cb6 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,6 +1,7 @@ generic-y += bitsperlong.h +generic-y += clkdev.h generic-y += cputime.h generic-y += current.h generic-y += early_ioremap.h @@ -23,7 +24,6 @@ generic-y += preempt.h generic-y += resource.h generic-y += rwsem.h generic-y += seccomp.h -generic-y += sections.h generic-y += segment.h generic-y += sembuf.h generic-y += serial.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 7da5503c0591..e08d15184056 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void) u32 irqstat; asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat)); + dsb(sy); return irqstat; } diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index d5525bfc7e3e..9156fc303afd 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -491,7 +491,6 @@ static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; } #endif #ifdef CONFIG_DEBUG_RODATA -void mark_rodata_ro(void); void set_kernel_text_rw(void); void set_kernel_text_ro(void); #else diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h index 523315115478..524692f4acab 100644 --- a/arch/arm/include/asm/checksum.h +++ b/arch/arm/include/asm/checksum.h @@ -84,10 +84,10 @@ ip_fast_csum(const void *iph, unsigned int ihl) } static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, + __u8 proto, __wsum sum) { - u32 lenprot = len | proto << 16; + u32 lenprot = len + proto; if (__builtin_constant_p(sum) && sum == 0) { __asm__( "adds %0, %1, %2 @ csum_tcpudp_nofold0 \n\t" @@ -121,8 +121,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, * returns a 16-bit checksum, already complemented */ static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) +csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len, + __u8 proto, __wsum sum) { return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); } @@ -144,8 +144,8 @@ __csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __ __be32 proto, __wsum sum); static inline __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len, - unsigned short proto, __wsum sum) +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, __u8 proto, __wsum sum) { return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len), htonl(proto), sum)); diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h deleted file mode 100644 index 4e8a4b27d7c7..000000000000 --- a/arch/arm/include/asm/clkdev.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/clkdev.h - * - * Copyright (C) 2008 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Helper for the clk API to assist looking up a struct clk. - */ -#ifndef __ASM_CLKDEV_H -#define __ASM_CLKDEV_H - -#include <linux/slab.h> - -#ifndef CONFIG_COMMON_CLK -#ifdef CONFIG_HAVE_MACH_CLKDEV -#include <mach/clkdev.h> -#else -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) -#endif -#endif - -static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) -{ - return kzalloc(size, GFP_KERNEL); -} - -#endif diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index e1f07764b0d6..7d919a9b32e5 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -74,7 +74,7 @@ static inline uint32_t __div64_32(uint64_t *n, uint32_t base) static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) { unsigned long long res; - unsigned int tmp = 0; + register unsigned int tmp asm("ip") = 0; if (!bias) { asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" @@ -90,12 +90,12 @@ static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) : "r" (m), "r" (n) : "cc"); } else { - asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" - "cmn %Q0, %Q1\n\t" - "adcs %R0, %R0, %R1\n\t" - "adc %Q0, %3, #0" - : "=&r" (res) - : "r" (m), "r" (n), "r" (tmp) + asm ( "umull %Q0, %R0, %Q2, %Q3\n\t" + "cmn %Q0, %Q2\n\t" + "adcs %R0, %R0, %R2\n\t" + "adc %Q0, %1, #0" + : "=&r" (res), "+&r" (tmp) + : "r" (m), "r" (n) : "cc"); } diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 194c91b610ff..3d5a5cd071bd 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -19,38 +19,7 @@ #ifndef __ARM_KVM_ASM_H__ #define __ARM_KVM_ASM_H__ -/* 0 is reserved as an invalid value. */ -#define c0_MPIDR 1 /* MultiProcessor ID Register */ -#define c0_CSSELR 2 /* Cache Size Selection Register */ -#define c1_SCTLR 3 /* System Control Register */ -#define c1_ACTLR 4 /* Auxiliary Control Register */ -#define c1_CPACR 5 /* Coprocessor Access Control */ -#define c2_TTBR0 6 /* Translation Table Base Register 0 */ -#define c2_TTBR0_high 7 /* TTBR0 top 32 bits */ -#define c2_TTBR1 8 /* Translation Table Base Register 1 */ -#define c2_TTBR1_high 9 /* TTBR1 top 32 bits */ -#define c2_TTBCR 10 /* Translation Table Base Control R. */ -#define c3_DACR 11 /* Domain Access Control Register */ -#define c5_DFSR 12 /* Data Fault Status Register */ -#define c5_IFSR 13 /* Instruction Fault Status Register */ -#define c5_ADFSR 14 /* Auxilary Data Fault Status R */ -#define c5_AIFSR 15 /* Auxilary Instrunction Fault Status R */ -#define c6_DFAR 16 /* Data Fault Address Register */ -#define c6_IFAR 17 /* Instruction Fault Address Register */ -#define c7_PAR 18 /* Physical Address Register */ -#define c7_PAR_high 19 /* PAR top 32 bits */ -#define c9_L2CTLR 20 /* Cortex A15/A7 L2 Control Register */ -#define c10_PRRR 21 /* Primary Region Remap Register */ -#define c10_NMRR 22 /* Normal Memory Remap Register */ -#define c12_VBAR 23 /* Vector Base Address Register */ -#define c13_CID 24 /* Context ID Register */ -#define c13_TID_URW 25 /* Thread ID, User R/W */ -#define c13_TID_URO 26 /* Thread ID, User R/O */ -#define c13_TID_PRIV 27 /* Thread ID, Privileged */ -#define c14_CNTKCTL 28 /* Timer Control Register (PL1) */ -#define c10_AMAIR0 29 /* Auxilary Memory Attribute Indirection Reg0 */ -#define c10_AMAIR1 30 /* Auxilary Memory Attribute Indirection Reg1 */ -#define NR_CP15_REGS 31 /* Number of regs (incl. invalid) */ +#include <asm/virt.h> #define ARM_EXCEPTION_RESET 0 #define ARM_EXCEPTION_UNDEFINED 1 @@ -79,6 +48,8 @@ #define rr_lo_hi(a1, a2) a1, a2 #endif +#define kvm_ksym_ref(kva) (kva) + #ifndef __ASSEMBLY__ struct kvm; struct kvm_vcpu; @@ -86,19 +57,15 @@ struct kvm_vcpu; extern char __kvm_hyp_init[]; extern char __kvm_hyp_init_end[]; -extern char __kvm_hyp_exit[]; -extern char __kvm_hyp_exit_end[]; - extern char __kvm_hyp_vector[]; -extern char __kvm_hyp_code_start[]; -extern char __kvm_hyp_code_end[]; - extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); + +extern void __init_stage2_translation(void); #endif #endif /* __ARM_KVM_ASM_H__ */ diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 3095df091ff8..ee5328fc4b06 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -68,12 +68,12 @@ static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu) static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu) { - return &vcpu->arch.regs.usr_regs.ARM_pc; + return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_pc; } static inline unsigned long *vcpu_cpsr(struct kvm_vcpu *vcpu) { - return &vcpu->arch.regs.usr_regs.ARM_cpsr; + return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr; } static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) @@ -83,13 +83,13 @@ static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) static inline bool mode_has_spsr(struct kvm_vcpu *vcpu) { - unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK; + unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK; return (cpsr_mode > USR_MODE && cpsr_mode < SYSTEM_MODE); } static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu) { - unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK; + unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK; return cpsr_mode > USR_MODE;; } @@ -108,11 +108,6 @@ static inline phys_addr_t kvm_vcpu_get_fault_ipa(struct kvm_vcpu *vcpu) return ((phys_addr_t)vcpu->arch.fault.hpfar & HPFAR_MASK) << 8; } -static inline unsigned long kvm_vcpu_get_hyp_pc(struct kvm_vcpu *vcpu) -{ - return vcpu->arch.fault.hyp_pc; -} - static inline bool kvm_vcpu_dabt_isvalid(struct kvm_vcpu *vcpu) { return kvm_vcpu_get_hsr(vcpu) & HSR_ISV; @@ -143,6 +138,11 @@ static inline bool kvm_vcpu_dabt_iss1tw(struct kvm_vcpu *vcpu) return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_S1PTW; } +static inline bool kvm_vcpu_dabt_is_cm(struct kvm_vcpu *vcpu) +{ + return !!(kvm_vcpu_get_hsr(vcpu) & HSR_DABT_CM); +} + /* Get Access Size from a data abort */ static inline int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu) { @@ -192,7 +192,7 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu) static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu) { - return vcpu->arch.cp15[c0_MPIDR] & MPIDR_HWID_BITMASK; + return vcpu_cp15(vcpu, c0_MPIDR) & MPIDR_HWID_BITMASK; } static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu) diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index f9f27792d8ed..385070180c25 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -85,20 +85,61 @@ struct kvm_vcpu_fault_info { u32 hsr; /* Hyp Syndrome Register */ u32 hxfar; /* Hyp Data/Inst. Fault Address Register */ u32 hpfar; /* Hyp IPA Fault Address Register */ - u32 hyp_pc; /* PC when exception was taken from Hyp mode */ }; -typedef struct vfp_hard_struct kvm_cpu_context_t; +/* + * 0 is reserved as an invalid value. + * Order should be kept in sync with the save/restore code. + */ +enum vcpu_sysreg { + __INVALID_SYSREG__, + c0_MPIDR, /* MultiProcessor ID Register */ + c0_CSSELR, /* Cache Size Selection Register */ + c1_SCTLR, /* System Control Register */ + c1_ACTLR, /* Auxiliary Control Register */ + c1_CPACR, /* Coprocessor Access Control */ + c2_TTBR0, /* Translation Table Base Register 0 */ + c2_TTBR0_high, /* TTBR0 top 32 bits */ + c2_TTBR1, /* Translation Table Base Register 1 */ + c2_TTBR1_high, /* TTBR1 top 32 bits */ + c2_TTBCR, /* Translation Table Base Control R. */ + c3_DACR, /* Domain Access Control Register */ + c5_DFSR, /* Data Fault Status Register */ + c5_IFSR, /* Instruction Fault Status Register */ + c5_ADFSR, /* Auxilary Data Fault Status R */ + c5_AIFSR, /* Auxilary Instrunction Fault Status R */ + c6_DFAR, /* Data Fault Address Register */ + c6_IFAR, /* Instruction Fault Address Register */ + c7_PAR, /* Physical Address Register */ + c7_PAR_high, /* PAR top 32 bits */ + c9_L2CTLR, /* Cortex A15/A7 L2 Control Register */ + c10_PRRR, /* Primary Region Remap Register */ + c10_NMRR, /* Normal Memory Remap Register */ + c12_VBAR, /* Vector Base Address Register */ + c13_CID, /* Context ID Register */ + c13_TID_URW, /* Thread ID, User R/W */ + c13_TID_URO, /* Thread ID, User R/O */ + c13_TID_PRIV, /* Thread ID, Privileged */ + c14_CNTKCTL, /* Timer Control Register (PL1) */ + c10_AMAIR0, /* Auxilary Memory Attribute Indirection Reg0 */ + c10_AMAIR1, /* Auxilary Memory Attribute Indirection Reg1 */ + NR_CP15_REGS /* Number of regs (incl. invalid) */ +}; + +struct kvm_cpu_context { + struct kvm_regs gp_regs; + struct vfp_hard_struct vfp; + u32 cp15[NR_CP15_REGS]; +}; + +typedef struct kvm_cpu_context kvm_cpu_context_t; struct kvm_vcpu_arch { - struct kvm_regs regs; + struct kvm_cpu_context ctxt; int target; /* Processor target */ DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES); - /* System control coprocessor (cp15) */ - u32 cp15[NR_CP15_REGS]; - /* The CPU type we expose to the VM */ u32 midr; @@ -111,9 +152,6 @@ struct kvm_vcpu_arch { /* Exception Information */ struct kvm_vcpu_fault_info fault; - /* Floating point registers (VFP and Advanced SIMD/NEON) */ - struct vfp_hard_struct vfp_guest; - /* Host FP context */ kvm_cpu_context_t *host_cpu_context; @@ -158,12 +196,14 @@ struct kvm_vcpu_stat { u64 exits; }; +#define vcpu_cp15(v,r) (v)->arch.ctxt.cp15[r] + int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init); unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); -u64 kvm_call_hyp(void *hypfn, ...); +unsigned long kvm_call_hyp(void *hypfn, ...); void force_vm_exit(const cpumask_t *mask); #define KVM_ARCH_WANT_MMU_NOTIFIER @@ -220,6 +260,11 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr, kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr); } +static inline void __cpu_init_stage2(void) +{ + kvm_call_hyp(__init_stage2_translation); +} + static inline int kvm_arch_dev_ioctl_check_extension(long ext) { return 0; @@ -242,5 +287,20 @@ static inline void kvm_arm_init_debug(void) {} static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {} +static inline int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} +static inline int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} +static inline int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h new file mode 100644 index 000000000000..f0e860761380 --- /dev/null +++ b/arch/arm/include/asm/kvm_hyp.h @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2015 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ARM_KVM_HYP_H__ +#define __ARM_KVM_HYP_H__ + +#include <linux/compiler.h> +#include <linux/kvm_host.h> +#include <asm/kvm_mmu.h> +#include <asm/vfp.h> + +#define __hyp_text __section(.hyp.text) notrace + +#define kern_hyp_va(v) (v) +#define hyp_kern_va(v) (v) + +#define __ACCESS_CP15(CRn, Op1, CRm, Op2) \ + "mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32 +#define __ACCESS_CP15_64(Op1, CRm) \ + "mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64 +#define __ACCESS_VFP(CRn) \ + "mrc", "mcr", __stringify(p10, 7, %0, CRn, cr0, 0), u32 + +#define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v))) +#define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__) + +#define __read_sysreg(r, w, c, t) ({ \ + t __val; \ + asm volatile(r " " c : "=r" (__val)); \ + __val; \ +}) +#define read_sysreg(...) __read_sysreg(__VA_ARGS__) + +#define write_special(v, r) \ + asm volatile("msr " __stringify(r) ", %0" : : "r" (v)) +#define read_special(r) ({ \ + u32 __val; \ + asm volatile("mrs %0, " __stringify(r) : "=r" (__val)); \ + __val; \ +}) + +#define TTBR0 __ACCESS_CP15_64(0, c2) +#define TTBR1 __ACCESS_CP15_64(1, c2) +#define VTTBR __ACCESS_CP15_64(6, c2) +#define PAR __ACCESS_CP15_64(0, c7) +#define CNTV_CVAL __ACCESS_CP15_64(3, c14) +#define CNTVOFF __ACCESS_CP15_64(4, c14) + +#define MIDR __ACCESS_CP15(c0, 0, c0, 0) +#define CSSELR __ACCESS_CP15(c0, 2, c0, 0) +#define VPIDR __ACCESS_CP15(c0, 4, c0, 0) +#define VMPIDR __ACCESS_CP15(c0, 4, c0, 5) +#define SCTLR __ACCESS_CP15(c1, 0, c0, 0) +#define CPACR __ACCESS_CP15(c1, 0, c0, 2) +#define HCR __ACCESS_CP15(c1, 4, c1, 0) +#define HDCR __ACCESS_CP15(c1, 4, c1, 1) +#define HCPTR __ACCESS_CP15(c1, 4, c1, 2) +#define HSTR __ACCESS_CP15(c1, 4, c1, 3) +#define TTBCR __ACCESS_CP15(c2, 0, c0, 2) +#define HTCR __ACCESS_CP15(c2, 4, c0, 2) +#define VTCR __ACCESS_CP15(c2, 4, c1, 2) +#define DACR __ACCESS_CP15(c3, 0, c0, 0) +#define DFSR __ACCESS_CP15(c5, 0, c0, 0) +#define IFSR __ACCESS_CP15(c5, 0, c0, 1) +#define ADFSR __ACCESS_CP15(c5, 0, c1, 0) +#define AIFSR __ACCESS_CP15(c5, 0, c1, 1) +#define HSR __ACCESS_CP15(c5, 4, c2, 0) +#define DFAR __ACCESS_CP15(c6, 0, c0, 0) +#define IFAR __ACCESS_CP15(c6, 0, c0, 2) +#define HDFAR __ACCESS_CP15(c6, 4, c0, 0) +#define HIFAR __ACCESS_CP15(c6, 4, c0, 2) +#define HPFAR __ACCESS_CP15(c6, 4, c0, 4) +#define ICIALLUIS __ACCESS_CP15(c7, 0, c1, 0) +#define ATS1CPR __ACCESS_CP15(c7, 0, c8, 0) +#define TLBIALLIS __ACCESS_CP15(c8, 0, c3, 0) +#define TLBIALLNSNHIS __ACCESS_CP15(c8, 4, c3, 4) +#define PRRR __ACCESS_CP15(c10, 0, c2, 0) +#define NMRR __ACCESS_CP15(c10, 0, c2, 1) +#define AMAIR0 __ACCESS_CP15(c10, 0, c3, 0) +#define AMAIR1 __ACCESS_CP15(c10, 0, c3, 1) +#define VBAR __ACCESS_CP15(c12, 0, c0, 0) +#define CID __ACCESS_CP15(c13, 0, c0, 1) +#define TID_URW __ACCESS_CP15(c13, 0, c0, 2) +#define TID_URO __ACCESS_CP15(c13, 0, c0, 3) +#define TID_PRIV __ACCESS_CP15(c13, 0, c0, 4) +#define HTPIDR __ACCESS_CP15(c13, 4, c0, 2) +#define CNTKCTL __ACCESS_CP15(c14, 0, c1, 0) +#define CNTV_CTL __ACCESS_CP15(c14, 0, c3, 1) +#define CNTHCTL __ACCESS_CP15(c14, 4, c1, 0) + +#define VFP_FPEXC __ACCESS_VFP(FPEXC) + +/* AArch64 compatibility macros, only for the timer so far */ +#define read_sysreg_el0(r) read_sysreg(r##_el0) +#define write_sysreg_el0(v, r) write_sysreg(v, r##_el0) + +#define cntv_ctl_el0 CNTV_CTL +#define cntv_cval_el0 CNTV_CVAL +#define cntvoff_el2 CNTVOFF +#define cnthctl_el2 CNTHCTL + +void __timer_save_state(struct kvm_vcpu *vcpu); +void __timer_restore_state(struct kvm_vcpu *vcpu); + +void __vgic_v2_save_state(struct kvm_vcpu *vcpu); +void __vgic_v2_restore_state(struct kvm_vcpu *vcpu); + +void __sysreg_save_state(struct kvm_cpu_context *ctxt); +void __sysreg_restore_state(struct kvm_cpu_context *ctxt); + +void asmlinkage __vfp_save_state(struct vfp_hard_struct *vfp); +void asmlinkage __vfp_restore_state(struct vfp_hard_struct *vfp); +static inline bool __vfp_enabled(void) +{ + return !(read_sysreg(HCPTR) & (HCPTR_TCP(11) | HCPTR_TCP(10))); +} + +void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt); +void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt); + +int asmlinkage __guest_enter(struct kvm_vcpu *vcpu, + struct kvm_cpu_context *host); +int asmlinkage __hyp_do_panic(const char *, int, u32); + +#endif /* __ARM_KVM_HYP_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index a520b7987a29..da44be9db4fa 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -179,7 +179,7 @@ struct kvm; static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu) { - return (vcpu->arch.cp15[c1_SCTLR] & 0b101) == 0b101; + return (vcpu_cp15(vcpu, c1_SCTLR) & 0b101) == 0b101; } static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index c79b57bf71c4..9427fd632552 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -134,6 +134,21 @@ */ #define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) +#ifdef CONFIG_XIP_KERNEL +/* + * When referencing data in RAM from the XIP region in a relative manner + * with the MMU off, we need the relative offset between the two physical + * addresses. The macro below achieves this, which is: + * __pa(v_data) - __xip_pa(v_text) + */ +#define PHYS_RELATIVE(v_data, v_text) \ + (((v_data) - PAGE_OFFSET + PLAT_PHYS_OFFSET) - \ + ((v_text) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + \ + CONFIG_XIP_PHYS_ADDR)) +#else +#define PHYS_RELATIVE(v_data, v_text) ((v_data) - (v_text)) +#endif + #ifndef __ASSEMBLY__ /* @@ -273,14 +288,14 @@ static inline void *phys_to_virt(phys_addr_t x) #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x))) #define pfn_to_kaddr(pfn) __va((phys_addr_t)(pfn) << PAGE_SHIFT) -extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x); +extern unsigned long (*arch_virt_to_idmap)(unsigned long x); /* * These are for systems that have a hardware interconnect supported alias of * physical memory for idmap purposes. Most cases should leave these - * untouched. + * untouched. Note: this can only return addresses less than 4GiB. */ -static inline phys_addr_t __virt_to_idmap(unsigned long x) +static inline unsigned long __virt_to_idmap(unsigned long x) { if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap) return arch_virt_to_idmap(x); @@ -303,20 +318,6 @@ static inline phys_addr_t __virt_to_idmap(unsigned long x) #define __bus_to_pfn(x) __phys_to_pfn(x) #endif -#ifdef CONFIG_VIRT_TO_BUS -#define virt_to_bus virt_to_bus -static inline __deprecated unsigned long virt_to_bus(void *x) -{ - return __virt_to_bus((unsigned long)x); -} - -#define bus_to_virt bus_to_virt -static inline __deprecated void *bus_to_virt(unsigned long x) -{ - return (void *)__bus_to_virt(x); -} -#endif - /* * Conversion between a struct page and a physical address. * diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 432ce8176498..fa5b42d44985 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -26,7 +26,12 @@ void __check_vmalloc_seq(struct mm_struct *mm); #ifdef CONFIG_CPU_HAS_ASID void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); -#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; }) +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + atomic64_set(&mm->context.id, 0); + return 0; +} #ifdef CONFIG_ARM_ERRATA_798181 void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm, @@ -85,7 +90,12 @@ static inline void finish_arch_post_lock_switch(void) #endif /* CONFIG_MMU */ -#define init_new_context(tsk,mm) 0 +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + return 0; +} + #endif /* CONFIG_CPU_HAS_ASID */ diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index a5635444ca41..057d381f4e57 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -2,9 +2,6 @@ #define ASMARM_PCI_H #ifdef __KERNEL__ -#include <asm-generic/pci-dma-compat.h> -#include <asm-generic/pci-bridge.h> - #include <asm/mach/pci.h> /* for pci_sys_data */ extern unsigned long pcibios_min_io; @@ -41,5 +38,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) } #endif /* __KERNEL__ */ - #endif diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h new file mode 100644 index 000000000000..803bbf2b20b8 --- /dev/null +++ b/arch/arm/include/asm/sections.h @@ -0,0 +1,8 @@ +#ifndef _ASM_ARM_SECTIONS_H +#define _ASM_ARM_SECTIONS_H + +#include <asm-generic/sections.h> + +extern char _exiprom[]; + +#endif /* _ASM_ARM_SECTIONS_H */ diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h index 00098615c6f0..73e5e8513751 100644 --- a/arch/arm/include/asm/sparsemem.h +++ b/arch/arm/include/asm/sparsemem.h @@ -15,10 +15,11 @@ * Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000, * then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26. * - * Define these in your mach/memory.h. + * These can be overridden in your mach/memory.h. */ -#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS) -#error Sparsemem is not supported on this platform +#if !defined(MAX_PHYSMEM_BITS) || !defined(SECTION_SIZE_BITS) +#define MAX_PHYSMEM_BITS 36 +#define SECTION_SIZE_BITS 28 #endif #endif diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index 4371f45c5784..d4ceaf5f299b 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -74,6 +74,15 @@ static inline bool is_hyp_mode_mismatched(void) { return !!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH); } + +static inline bool is_kernel_in_hyp_mode(void) +{ + return false; +} + +/* The section containing the hypervisor text */ +extern char __hyp_text_start[]; +extern char __hyp_text_end[]; #endif #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h index 0375c8caa061..9408a994cc91 100644 --- a/arch/arm/include/asm/xen/page-coherent.h +++ b/arch/arm/include/asm/xen/page-coherent.h @@ -35,14 +35,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page, dma_addr_t dev_addr, unsigned long offset, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page); + unsigned long page_pfn = page_to_xen_pfn(page); + unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr); + unsigned long compound_pages = + (1<<compound_order(page)) * XEN_PFN_PER_PAGE; + bool local = (page_pfn <= dev_pfn) && + (dev_pfn - page_pfn < compound_pages); + /* - * Dom0 is mapped 1:1, while the Linux page can be spanned accross - * multiple Xen page, it's not possible to have a mix of local and - * foreign Xen page. So if the first xen_pfn == mfn the page is local - * otherwise it's a foreign page grant-mapped in dom0. If the page is - * local we can safely call the native dma_ops function, otherwise we - * call the xen specific function. + * Dom0 is mapped 1:1, while the Linux page can span across + * multiple Xen pages, it's not possible for it to contain a + * mix of local and foreign Xen pages. So if the first xen_pfn + * == mfn the page is local otherwise it's a foreign page + * grant-mapped in dom0. If the page is local we can safely + * call the native dma_ops function, otherwise we call the xen + * specific function. */ if (local) __generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs); diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 2c5f160be65e..ad325a8c7e1e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o +AFLAGS_hyp-stub.o :=-Wa,-march=armv7-a ifeq ($(CONFIG_ARM_PSCI),y) obj-$(CONFIG_SMP) += psci_smp.o endif diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 871b8267d211..27d05813ff09 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -170,41 +170,11 @@ int main(void) DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE); BLANK(); #ifdef CONFIG_KVM_ARM_HOST - DEFINE(VCPU_KVM, offsetof(struct kvm_vcpu, kvm)); - DEFINE(VCPU_MIDR, offsetof(struct kvm_vcpu, arch.midr)); - DEFINE(VCPU_CP15, offsetof(struct kvm_vcpu, arch.cp15)); - DEFINE(VCPU_VFP_GUEST, offsetof(struct kvm_vcpu, arch.vfp_guest)); - DEFINE(VCPU_VFP_HOST, offsetof(struct kvm_vcpu, arch.host_cpu_context)); - DEFINE(VCPU_REGS, offsetof(struct kvm_vcpu, arch.regs)); - DEFINE(VCPU_USR_REGS, offsetof(struct kvm_vcpu, arch.regs.usr_regs)); - DEFINE(VCPU_SVC_REGS, offsetof(struct kvm_vcpu, arch.regs.svc_regs)); - DEFINE(VCPU_ABT_REGS, offsetof(struct kvm_vcpu, arch.regs.abt_regs)); - DEFINE(VCPU_UND_REGS, offsetof(struct kvm_vcpu, arch.regs.und_regs)); - DEFINE(VCPU_IRQ_REGS, offsetof(struct kvm_vcpu, arch.regs.irq_regs)); - DEFINE(VCPU_FIQ_REGS, offsetof(struct kvm_vcpu, arch.regs.fiq_regs)); - DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc)); - DEFINE(VCPU_CPSR, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr)); - DEFINE(VCPU_HCR, offsetof(struct kvm_vcpu, arch.hcr)); - DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines)); - DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.fault.hsr)); - DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.fault.hxfar)); - DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.fault.hpfar)); - DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.fault.hyp_pc)); - DEFINE(VCPU_VGIC_CPU, offsetof(struct kvm_vcpu, arch.vgic_cpu)); - DEFINE(VGIC_V2_CPU_HCR, offsetof(struct vgic_cpu, vgic_v2.vgic_hcr)); - DEFINE(VGIC_V2_CPU_VMCR, offsetof(struct vgic_cpu, vgic_v2.vgic_vmcr)); - DEFINE(VGIC_V2_CPU_MISR, offsetof(struct vgic_cpu, vgic_v2.vgic_misr)); - DEFINE(VGIC_V2_CPU_EISR, offsetof(struct vgic_cpu, vgic_v2.vgic_eisr)); - DEFINE(VGIC_V2_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr)); - DEFINE(VGIC_V2_CPU_APR, offsetof(struct vgic_cpu, vgic_v2.vgic_apr)); - DEFINE(VGIC_V2_CPU_LR, offsetof(struct vgic_cpu, vgic_v2.vgic_lr)); - DEFINE(VGIC_CPU_NR_LR, offsetof(struct vgic_cpu, nr_lr)); - DEFINE(VCPU_TIMER_CNTV_CTL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl)); - DEFINE(VCPU_TIMER_CNTV_CVAL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_cval)); - DEFINE(KVM_TIMER_CNTVOFF, offsetof(struct kvm, arch.timer.cntvoff)); - DEFINE(KVM_TIMER_ENABLED, offsetof(struct kvm, arch.timer.enabled)); - DEFINE(KVM_VGIC_VCTRL, offsetof(struct kvm, arch.vgic.vctrl_base)); - DEFINE(KVM_VTTBR, offsetof(struct kvm, arch.vttbr)); + DEFINE(VCPU_GUEST_CTXT, offsetof(struct kvm_vcpu, arch.ctxt)); + DEFINE(VCPU_HOST_CTXT, offsetof(struct kvm_vcpu, arch.host_cpu_context)); + DEFINE(CPU_CTXT_VFP, offsetof(struct kvm_cpu_context, vfp)); + DEFINE(CPU_CTXT_GP_REGS, offsetof(struct kvm_cpu_context, gp_regs)); + DEFINE(GP_REGS_USR, offsetof(struct kvm_regs, usr_regs)); #endif BLANK(); #ifdef CONFIG_VDSO diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3ce377f7251f..e2550500486d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -1064,7 +1064,6 @@ ENDPROC(vector_\name) .endm .section .stubs, "ax", %progbits -__stubs_start: @ This must be the first word .word vector_swi @@ -1202,14 +1201,13 @@ vector_addrexcptn: .long __fiq_svc @ e .long __fiq_svc @ f - .globl vector_fiq_offset - .equ vector_fiq_offset, vector_fiq + .globl vector_fiq .section .vectors, "ax", %progbits -__vectors_start: +.L__vectors_start: W(b) vector_rst W(b) vector_und - W(ldr) pc, __vectors_start + 0x1000 + W(ldr) pc, .L__vectors_start + 0x1000 W(b) vector_pabt W(b) vector_dabt W(b) vector_addrexcptn diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c index a71501ff6f18..b09561a6d06a 100644 --- a/arch/arm/kernel/hibernate.c +++ b/arch/arm/kernel/hibernate.c @@ -62,7 +62,7 @@ static int notrace arch_save_image(unsigned long unused) ret = swsusp_save(); if (ret == 0) - _soft_restart(virt_to_phys(cpu_resume), false); + _soft_restart(virt_to_idmap(cpu_resume), false); return ret; } @@ -87,7 +87,7 @@ static void notrace arch_restore_image(void *unused) for (pbe = restore_pblist; pbe; pbe = pbe->next) copy_page(pbe->orig_address, pbe->address); - _soft_restart(virt_to_phys(cpu_resume), false); + _soft_restart(virt_to_idmap(cpu_resume), false); } static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata; diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 2a55373f49bf..0b1e4a93d67e 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -17,6 +17,7 @@ */ #include <linux/init.h> +#include <linux/irqchip/arm-gic-v3.h> #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/virt.h> @@ -161,6 +162,29 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE 1: #endif +#ifdef CONFIG_ARM_GIC_V3 + @ Check whether GICv3 system registers are available + mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1 + ubfx r7, r7, #28, #4 + cmp r7, #1 + bne 2f + + @ Enable system register accesses + mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE + orr r7, r7, #(ICC_SRE_EL2_ENABLE | ICC_SRE_EL2_SRE) + mcr p15, 4, r7, c12, c9, 5 @ ICC_HSRE + isb + + @ SRE bit could be forced to 0 by firmware. + @ Check whether it sticks before accessing any other sysreg + mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE + tst r7, #ICC_SRE_EL2_SRE + beq 2f + mov r7, #0 + mcr p15, 4, r7, c12, c11, 0 @ ICH_HCR +2: +#endif + bx lr @ The boot CPU mode is left in r4. ENDPROC(__hyp_stub_install_secondary) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 1d45320ee125..ece04a457486 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -95,7 +95,7 @@ void __init init_IRQ(void) outer_cache.write_sec = machine_desc->l2c_write_sec; ret = l2x0_of_init(machine_desc->l2c_aux_val, machine_desc->l2c_aux_mask); - if (ret) + if (ret && ret != -ENODEV) pr_err("L2C: failed to init: %d\n", ret); } diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 8bf3b7c09888..59fd0e24c56b 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -143,10 +143,8 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { - unsigned long page_list; - unsigned long reboot_code_buffer_phys; - unsigned long reboot_entry = (unsigned long)relocate_new_kernel; - unsigned long reboot_entry_phys; + unsigned long page_list, reboot_entry_phys; + void (*reboot_entry)(void); void *reboot_code_buffer; /* @@ -159,9 +157,6 @@ void machine_kexec(struct kimage *image) page_list = image->head & PAGE_MASK; - /* we need both effective and real address here */ - reboot_code_buffer_phys = - page_to_pfn(image->control_code_page) << PAGE_SHIFT; reboot_code_buffer = page_address(image->control_code_page); /* Prepare parameters for reboot_code_buffer*/ @@ -174,10 +169,11 @@ void machine_kexec(struct kimage *image) /* copy our kernel relocation code to the control code page */ reboot_entry = fncpy(reboot_code_buffer, - reboot_entry, + &relocate_new_kernel, relocate_new_kernel_size); - reboot_entry_phys = (unsigned long)reboot_entry + - (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer); + + /* get the identity mapping physical address for the reboot code */ + reboot_entry_phys = virt_to_idmap(reboot_entry); pr_info("Bye!\n"); diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index efdddcb97dd1..4f14b5ce6535 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -34,7 +34,7 @@ * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. */ #undef MODULES_VADDR -#define MODULES_VADDR (((unsigned long)_etext + ~PMD_MASK) & PMD_MASK) +#define MODULES_VADDR (((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK) #endif #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c index 38269358fd25..71a2ff9ec490 100644 --- a/arch/arm/kernel/reboot.c +++ b/arch/arm/kernel/reboot.c @@ -50,7 +50,7 @@ static void __soft_restart(void *addr) flush_cache_all(); /* Switch to the identity mapping. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset); + phys_reset = (phys_reset_t)virt_to_idmap(cpu_reset); phys_reset((unsigned long)addr); /* Should never get here. */ diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7d0cba6f1cc5..139791ed473d 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -176,13 +176,13 @@ static struct resource mem_res[] = { .name = "Kernel code", .start = 0, .end = 0, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_SYSTEM_RAM }, { .name = "Kernel data", .start = 0, .end = 0, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_SYSTEM_RAM } }; @@ -851,7 +851,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) res->name = "System RAM"; res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; request_resource(&iomem_resource, res); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 37312f6749f3..baee70267f29 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -409,7 +409,7 @@ asmlinkage void secondary_start_kernel(void) /* * OK, it's off to the idle thread for us */ - cpu_startup_entry(CPUHP_ONLINE); + cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); } void __init smp_cpus_done(unsigned int max_cpus) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 08b7847bf912..ec279d161b32 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -40,7 +40,7 @@ * to run the rebalance_domains for all idle cores and the cpu_capacity can be * updated during this sequence. */ -static DEFINE_PER_CPU(unsigned long, cpu_scale); +static DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE; unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu) { @@ -306,8 +306,6 @@ void __init init_cpu_topology(void) cpu_topo->socket_id = -1; cpumask_clear(&cpu_topo->core_sibling); cpumask_clear(&cpu_topo->thread_sibling); - - set_capacity_scale(cpu, SCHED_CAPACITY_SCALE); } smp_wmb(); diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S new file mode 100644 index 000000000000..cba1ec899a69 --- /dev/null +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -0,0 +1,316 @@ +/* ld script to make ARM Linux kernel + * taken from the i386 version by Russell King + * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> + */ + +#include <asm-generic/vmlinux.lds.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/memory.h> +#include <asm/page.h> + +#define PROC_INFO \ + . = ALIGN(4); \ + VMLINUX_SYMBOL(__proc_info_begin) = .; \ + *(.proc.info.init) \ + VMLINUX_SYMBOL(__proc_info_end) = .; + +#define IDMAP_TEXT \ + ALIGN_FUNCTION(); \ + VMLINUX_SYMBOL(__idmap_text_start) = .; \ + *(.idmap.text) \ + VMLINUX_SYMBOL(__idmap_text_end) = .; \ + . = ALIGN(PAGE_SIZE); \ + VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ + *(.hyp.idmap.text) \ + VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; + +#ifdef CONFIG_HOTPLUG_CPU +#define ARM_CPU_DISCARD(x) +#define ARM_CPU_KEEP(x) x +#else +#define ARM_CPU_DISCARD(x) x +#define ARM_CPU_KEEP(x) +#endif + +#if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \ + defined(CONFIG_GENERIC_BUG) +#define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) +#else +#define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x +#endif + +OUTPUT_ARCH(arm) +ENTRY(stext) + +#ifndef __ARMEB__ +jiffies = jiffies_64; +#else +jiffies = jiffies_64 + 4; +#endif + +SECTIONS +{ + /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * + * unwind exit sections must be discarded before the rest of the + * unwind sections get included. + */ + /DISCARD/ : { + *(.ARM.exidx.exit.text) + *(.ARM.extab.exit.text) + ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) + ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL +#ifndef CONFIG_MMU + *(.text.fixup) + *(__ex_table) +#endif +#ifndef CONFIG_SMP_ON_UP + *(.alt.smp.init) +#endif + *(.discard) + *(.discard.*) + } + + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); + _xiprom = .; /* XIP ROM area to be mapped */ + + .head.text : { + _text = .; + HEAD_TEXT + } + + .text : { /* Real text segment */ + _stext = .; /* Text and read-only data */ + IDMAP_TEXT + __exception_text_start = .; + *(.exception.text) + __exception_text_end = .; + IRQENTRY_TEXT + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.gnu.warning) + *(.glue_7) + *(.glue_7t) + . = ALIGN(4); + *(.got) /* Global offset table */ + ARM_CPU_KEEP(PROC_INFO) + } + + RO_DATA(PAGE_SIZE) + + . = ALIGN(4); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; +#ifdef CONFIG_MMU + *(__ex_table) +#endif + __stop___ex_table = .; + } + +#ifdef CONFIG_ARM_UNWIND + /* + * Stack unwinding tables + */ + . = ALIGN(8); + .ARM.unwind_idx : { + __start_unwind_idx = .; + *(.ARM.exidx*) + __stop_unwind_idx = .; + } + .ARM.unwind_tab : { + __start_unwind_tab = .; + *(.ARM.extab*) + __stop_unwind_tab = .; + } +#endif + + NOTES + + _etext = .; /* End of text and rodata section */ + + /* + * The vectors and stubs are relocatable code, and the + * only thing that matters is their relative offsets + */ + __vectors_start = .; + .vectors 0xffff0000 : AT(__vectors_start) { + *(.vectors) + } + . = __vectors_start + SIZEOF(.vectors); + __vectors_end = .; + + __stubs_start = .; + .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) { + *(.stubs) + } + . = __stubs_start + SIZEOF(.stubs); + __stubs_end = .; + + PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors)); + + INIT_TEXT_SECTION(8) + .exit.text : { + ARM_EXIT_KEEP(EXIT_TEXT) + } + .init.proc.info : { + ARM_CPU_DISCARD(PROC_INFO) + } + .init.arch.info : { + __arch_info_begin = .; + *(.arch.info.init) + __arch_info_end = .; + } + .init.tagtable : { + __tagtable_begin = .; + *(.taglist.init) + __tagtable_end = .; + } +#ifdef CONFIG_SMP_ON_UP + .init.smpalt : { + __smpalt_begin = .; + *(.alt.smp.init) + __smpalt_end = .; + } +#endif + .init.pv_table : { + __pv_table_begin = .; + *(.pv_table) + __pv_table_end = .; + } + .init.data : { + INIT_SETUP(16) + INIT_CALLS + CON_INITCALL + SECURITY_INITCALL + INIT_RAM_FS + } + +#ifdef CONFIG_SMP + PERCPU_SECTION(L1_CACHE_BYTES) +#endif + + _exiprom = .; /* End of XIP ROM area */ + __data_loc = ALIGN(4); /* location in binary */ + . = PAGE_OFFSET + TEXT_OFFSET; + + .data : AT(__data_loc) { + _data = .; /* address in memory */ + _sdata = .; + + /* + * first, the init task union, aligned + * to an 8192 byte boundary. + */ + INIT_TASK_DATA(THREAD_SIZE) + + . = ALIGN(PAGE_SIZE); + __init_begin = .; + INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) + . = ALIGN(PAGE_SIZE); + __init_end = .; + + NOSAVE_DATA + CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) + READ_MOSTLY_DATA(L1_CACHE_BYTES) + + /* + * and the usual data section + */ + DATA_DATA + CONSTRUCTORS + + _edata = .; + } + _edata_loc = __data_loc + SIZEOF(.data); + +#ifdef CONFIG_HAVE_TCM + /* + * We align everything to a page boundary so we can + * free it after init has commenced and TCM contents have + * been copied to its destination. + */ + .tcm_start : { + . = ALIGN(PAGE_SIZE); + __tcm_start = .; + __itcm_start = .; + } + + /* + * Link these to the ITCM RAM + * Put VMA to the TCM address and LMA to the common RAM + * and we'll upload the contents from RAM to TCM and free + * the used RAM after that. + */ + .text_itcm ITCM_OFFSET : AT(__itcm_start) + { + __sitcm_text = .; + *(.tcm.text) + *(.tcm.rodata) + . = ALIGN(4); + __eitcm_text = .; + } + + /* + * Reset the dot pointer, this is needed to create the + * relative __dtcm_start below (to be used as extern in code). + */ + . = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm); + + .dtcm_start : { + __dtcm_start = .; + } + + /* TODO: add remainder of ITCM as well, that can be used for data! */ + .data_dtcm DTCM_OFFSET : AT(__dtcm_start) + { + . = ALIGN(4); + __sdtcm_data = .; + *(.tcm.data) + . = ALIGN(4); + __edtcm_data = .; + } + + /* Reset the dot pointer or the linker gets confused */ + . = ADDR(.dtcm_start) + SIZEOF(.data_dtcm); + + /* End marker for freeing TCM copy in linked object */ + .tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){ + . = ALIGN(PAGE_SIZE); + __tcm_end = .; + } +#endif + + BSS_SECTION(0, 0, 0) + _end = .; + + STABS_DEBUG +} + +/* + * These must never be empty + * If you have to comment these two assert statements out, your + * binutils is too old (for other reasons as well) + */ +ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") +ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") + +/* + * The HYP init code can't be more than a page long, + * and should not cross a page boundary. + * The above comment applies as well. + */ +ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, + "HYP init code too big or misaligned") diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 8b60fde5ce48..1fab979daeaf 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -3,14 +3,16 @@ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> */ +#ifdef CONFIG_XIP_KERNEL +#include "vmlinux-xip.lds.S" +#else + #include <asm-generic/vmlinux.lds.h> #include <asm/cache.h> #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/page.h> -#ifdef CONFIG_ARM_KERNMEM_PERMS #include <asm/pgtable.h> -#endif #define PROC_INFO \ . = ALIGN(4); \ @@ -18,6 +20,11 @@ *(.proc.info.init) \ VMLINUX_SYMBOL(__proc_info_end) = .; +#define HYPERVISOR_TEXT \ + VMLINUX_SYMBOL(__hyp_text_start) = .; \ + *(.hyp.text) \ + VMLINUX_SYMBOL(__hyp_text_end) = .; + #define IDMAP_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__idmap_text_start) = .; \ @@ -84,17 +91,13 @@ SECTIONS *(.discard.*) } -#ifdef CONFIG_XIP_KERNEL - . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); -#else . = PAGE_OFFSET + TEXT_OFFSET; -#endif .head.text : { _text = .; HEAD_TEXT } -#ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); #endif @@ -108,6 +111,7 @@ SECTIONS TEXT_TEXT SCHED_TEXT LOCK_TEXT + HYPERVISOR_TEXT KPROBES_TEXT *(.gnu.warning) *(.glue_7) @@ -117,7 +121,7 @@ SECTIONS ARM_CPU_KEEP(PROC_INFO) } -#ifdef CONFIG_DEBUG_RODATA +#ifdef CONFIG_DEBUG_ALIGN_RODATA . = ALIGN(1<<SECTION_SHIFT); #endif RO_DATA(PAGE_SIZE) @@ -152,32 +156,33 @@ SECTIONS _etext = .; /* End of text and rodata section */ -#ifndef CONFIG_XIP_KERNEL -# ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); -# else +#else . = ALIGN(PAGE_SIZE); -# endif - __init_begin = .; #endif + __init_begin = .; + /* * The vectors and stubs are relocatable code, and the * only thing that matters is their relative offsets */ __vectors_start = .; - .vectors 0 : AT(__vectors_start) { + .vectors 0xffff0000 : AT(__vectors_start) { *(.vectors) } . = __vectors_start + SIZEOF(.vectors); __vectors_end = .; __stubs_start = .; - .stubs 0x1000 : AT(__stubs_start) { + .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) { *(.stubs) } . = __stubs_start + SIZEOF(.stubs); __stubs_end = .; + PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors)); + INIT_TEXT_SECTION(8) .exit.text : { ARM_EXIT_KEEP(EXIT_TEXT) @@ -208,37 +213,28 @@ SECTIONS __pv_table_end = .; } .init.data : { -#ifndef CONFIG_XIP_KERNEL INIT_DATA -#endif INIT_SETUP(16) INIT_CALLS CON_INITCALL SECURITY_INITCALL INIT_RAM_FS } -#ifndef CONFIG_XIP_KERNEL .exit.data : { ARM_EXIT_KEEP(EXIT_DATA) } -#endif #ifdef CONFIG_SMP PERCPU_SECTION(L1_CACHE_BYTES) #endif -#ifdef CONFIG_XIP_KERNEL - __data_loc = ALIGN(4); /* location in binary */ - . = PAGE_OFFSET + TEXT_OFFSET; -#else -#ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); #else . = ALIGN(THREAD_SIZE); #endif __init_end = .; __data_loc = .; -#endif .data : AT(__data_loc) { _data = .; /* address in memory */ @@ -250,15 +246,6 @@ SECTIONS */ INIT_TASK_DATA(THREAD_SIZE) -#ifdef CONFIG_XIP_KERNEL - . = ALIGN(PAGE_SIZE); - __init_begin = .; - INIT_DATA - ARM_EXIT_KEEP(EXIT_DATA) - . = ALIGN(PAGE_SIZE); - __init_end = .; -#endif - NOSAVE_DATA CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) READ_MOSTLY_DATA(L1_CACHE_BYTES) @@ -336,6 +323,15 @@ SECTIONS STABS_DEBUG } +#ifdef CONFIG_DEBUG_RODATA +/* + * Without CONFIG_DEBUG_ALIGN_RODATA, __start_rodata_section_aligned will + * be the first section-aligned location after __start_rodata. Otherwise, + * it will be equal to __start_rodata. + */ +__start_rodata_section_aligned = ALIGN(__start_rodata, 1 << SECTION_SHIFT); +#endif + /* * These must never be empty * If you have to comment these two assert statements out, your @@ -351,3 +347,5 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") */ ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, "HYP init code too big or misaligned") + +#endif /* CONFIG_XIP_KERNEL */ diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index c5eef02c52ba..eb1bf4309c13 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -17,6 +17,7 @@ AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) KVM := ../../../virt/kvm kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o +obj-$(CONFIG_KVM_ARM_HOST) += hyp/ obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index dda1959f0dde..3e0fb66d8e05 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -28,6 +28,7 @@ #include <linux/sched.h> #include <linux/kvm.h> #include <trace/events/kvm.h> +#include <kvm/arm_pmu.h> #define CREATE_TRACE_POINTS #include "trace.h" @@ -265,6 +266,7 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) kvm_mmu_free_memory_caches(vcpu); kvm_timer_vcpu_terminate(vcpu); kvm_vgic_vcpu_destroy(vcpu); + kvm_pmu_vcpu_destroy(vcpu); kmem_cache_free(kvm_vcpu_cache, vcpu); } @@ -320,6 +322,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) vcpu->cpu = -1; kvm_arm_set_running_vcpu(NULL); + kvm_timer_vcpu_put(vcpu); } int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, @@ -506,18 +509,18 @@ static void kvm_arm_resume_guest(struct kvm *kvm) struct kvm_vcpu *vcpu; kvm_for_each_vcpu(i, vcpu, kvm) { - wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu); vcpu->arch.pause = false; - wake_up_interruptible(wq); + swake_up(wq); } } static void vcpu_sleep(struct kvm_vcpu *vcpu) { - wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu); - wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && + swait_event_interruptible(*wq, ((!vcpu->arch.power_off) && (!vcpu->arch.pause))); } @@ -577,6 +580,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) * non-preemptible context. */ preempt_disable(); + kvm_pmu_flush_hwstate(vcpu); kvm_timer_flush_hwstate(vcpu); kvm_vgic_flush_hwstate(vcpu); @@ -593,6 +597,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) || vcpu->arch.power_off || vcpu->arch.pause) { local_irq_enable(); + kvm_pmu_sync_hwstate(vcpu); kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); preempt_enable(); @@ -642,10 +647,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); /* - * We must sync the timer state before the vgic state so that - * the vgic can properly sample the updated state of the + * We must sync the PMU and timer state before the vgic state so + * that the vgic can properly sample the updated state of the * interrupt line. */ + kvm_pmu_sync_hwstate(vcpu); kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); @@ -823,11 +829,54 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu, return 0; } +static int kvm_arm_vcpu_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + default: + ret = kvm_arm_vcpu_arch_set_attr(vcpu, attr); + break; + } + + return ret; +} + +static int kvm_arm_vcpu_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + default: + ret = kvm_arm_vcpu_arch_get_attr(vcpu, attr); + break; + } + + return ret; +} + +static int kvm_arm_vcpu_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + default: + ret = kvm_arm_vcpu_arch_has_attr(vcpu, attr); + break; + } + + return ret; +} + long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { struct kvm_vcpu *vcpu = filp->private_data; void __user *argp = (void __user *)arg; + struct kvm_device_attr attr; switch (ioctl) { case KVM_ARM_VCPU_INIT: { @@ -870,6 +919,21 @@ long kvm_arch_vcpu_ioctl(struct file *filp, return -E2BIG; return kvm_arm_copy_reg_indices(vcpu, user_list->reg); } + case KVM_SET_DEVICE_ATTR: { + if (copy_from_user(&attr, argp, sizeof(attr))) + return -EFAULT; + return kvm_arm_vcpu_set_attr(vcpu, &attr); + } + case KVM_GET_DEVICE_ATTR: { + if (copy_from_user(&attr, argp, sizeof(attr))) + return -EFAULT; + return kvm_arm_vcpu_get_attr(vcpu, &attr); + } + case KVM_HAS_DEVICE_ATTR: { + if (copy_from_user(&attr, argp, sizeof(attr))) + return -EFAULT; + return kvm_arm_vcpu_has_attr(vcpu, &attr); + } default: return -EINVAL; } @@ -967,6 +1031,11 @@ long kvm_arch_vm_ioctl(struct file *filp, } } +static void cpu_init_stage2(void *dummy) +{ + __cpu_init_stage2(); +} + static void cpu_init_hyp_mode(void *dummy) { phys_addr_t boot_pgd_ptr; @@ -982,9 +1051,10 @@ static void cpu_init_hyp_mode(void *dummy) pgd_ptr = kvm_mmu_get_httbr(); stack_page = __this_cpu_read(kvm_arm_hyp_stack_page); hyp_stack_ptr = stack_page + PAGE_SIZE; - vector_ptr = (unsigned long)__kvm_hyp_vector; + vector_ptr = (unsigned long)kvm_ksym_ref(__kvm_hyp_vector); __cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr); + __cpu_init_stage2(); kvm_arm_init_debug(); } @@ -1035,6 +1105,82 @@ static inline void hyp_cpu_pm_init(void) } #endif +static void teardown_common_resources(void) +{ + free_percpu(kvm_host_cpu_state); +} + +static int init_common_resources(void) +{ + kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t); + if (!kvm_host_cpu_state) { + kvm_err("Cannot allocate host CPU state\n"); + return -ENOMEM; + } + + return 0; +} + +static int init_subsystems(void) +{ + int err; + + /* + * Init HYP view of VGIC + */ + err = kvm_vgic_hyp_init(); + switch (err) { + case 0: + vgic_present = true; + break; + case -ENODEV: + case -ENXIO: + vgic_present = false; + break; + default: + return err; + } + + /* + * Init HYP architected timer support + */ + err = kvm_timer_hyp_init(); + if (err) + return err; + + kvm_perf_init(); + kvm_coproc_table_init(); + + return 0; +} + +static void teardown_hyp_mode(void) +{ + int cpu; + + if (is_kernel_in_hyp_mode()) + return; + + free_hyp_pgds(); + for_each_possible_cpu(cpu) + free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); +} + +static int init_vhe_mode(void) +{ + /* + * Execute the init code on each CPU. + */ + on_each_cpu(cpu_init_stage2, NULL, 1); + + /* set size of VMID supported by CPU */ + kvm_vmid_bits = kvm_get_vmid_bits(); + kvm_info("%d-bit VMID\n", kvm_vmid_bits); + + kvm_info("VHE mode initialized successfully\n"); + return 0; +} + /** * Inits Hyp-mode on all online CPUs */ @@ -1065,7 +1211,7 @@ static int init_hyp_mode(void) stack_page = __get_free_page(GFP_KERNEL); if (!stack_page) { err = -ENOMEM; - goto out_free_stack_pages; + goto out_err; } per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page; @@ -1074,16 +1220,18 @@ static int init_hyp_mode(void) /* * Map the Hyp-code called directly from the host */ - err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end); + err = create_hyp_mappings(kvm_ksym_ref(__hyp_text_start), + kvm_ksym_ref(__hyp_text_end)); if (err) { kvm_err("Cannot map world-switch code\n"); - goto out_free_mappings; + goto out_err; } - err = create_hyp_mappings(__start_rodata, __end_rodata); + err = create_hyp_mappings(kvm_ksym_ref(__start_rodata), + kvm_ksym_ref(__end_rodata)); if (err) { kvm_err("Cannot map rodata section\n"); - goto out_free_mappings; + goto out_err; } /* @@ -1095,20 +1243,10 @@ static int init_hyp_mode(void) if (err) { kvm_err("Cannot map hyp stack\n"); - goto out_free_mappings; + goto out_err; } } - /* - * Map the host CPU structures - */ - kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t); - if (!kvm_host_cpu_state) { - err = -ENOMEM; - kvm_err("Cannot allocate host CPU state\n"); - goto out_free_mappings; - } - for_each_possible_cpu(cpu) { kvm_cpu_context_t *cpu_ctxt; @@ -1117,7 +1255,7 @@ static int init_hyp_mode(void) if (err) { kvm_err("Cannot map host CPU state: %d\n", err); - goto out_free_context; + goto out_err; } } @@ -1126,34 +1264,22 @@ static int init_hyp_mode(void) */ on_each_cpu(cpu_init_hyp_mode, NULL, 1); - /* - * Init HYP view of VGIC - */ - err = kvm_vgic_hyp_init(); - switch (err) { - case 0: - vgic_present = true; - break; - case -ENODEV: - case -ENXIO: - vgic_present = false; - break; - default: - goto out_free_context; - } - - /* - * Init HYP architected timer support - */ - err = kvm_timer_hyp_init(); - if (err) - goto out_free_context; - #ifndef CONFIG_HOTPLUG_CPU free_boot_hyp_pgd(); #endif - kvm_perf_init(); + cpu_notifier_register_begin(); + + err = __register_cpu_notifier(&hyp_init_cpu_nb); + + cpu_notifier_register_done(); + + if (err) { + kvm_err("Cannot register HYP init CPU notifier (%d)\n", err); + goto out_err; + } + + hyp_cpu_pm_init(); /* set size of VMID supported by CPU */ kvm_vmid_bits = kvm_get_vmid_bits(); @@ -1162,14 +1288,9 @@ static int init_hyp_mode(void) kvm_info("Hyp mode initialized successfully\n"); return 0; -out_free_context: - free_percpu(kvm_host_cpu_state); -out_free_mappings: - free_hyp_pgds(); -out_free_stack_pages: - for_each_possible_cpu(cpu) - free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); + out_err: + teardown_hyp_mode(); kvm_err("error initializing Hyp mode: %d\n", err); return err; } @@ -1213,26 +1334,27 @@ int kvm_arch_init(void *opaque) } } - cpu_notifier_register_begin(); - - err = init_hyp_mode(); + err = init_common_resources(); if (err) - goto out_err; + return err; - err = __register_cpu_notifier(&hyp_init_cpu_nb); - if (err) { - kvm_err("Cannot register HYP init CPU notifier (%d)\n", err); + if (is_kernel_in_hyp_mode()) + err = init_vhe_mode(); + else + err = init_hyp_mode(); + if (err) goto out_err; - } - - cpu_notifier_register_done(); - hyp_cpu_pm_init(); + err = init_subsystems(); + if (err) + goto out_hyp; - kvm_coproc_table_init(); return 0; + +out_hyp: + teardown_hyp_mode(); out_err: - cpu_notifier_register_done(); + teardown_common_resources(); return err; } diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index f3d88dc388bc..1bb2b79c01ff 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -16,6 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +#include <linux/bsearch.h> #include <linux/mm.h> #include <linux/kvm_host.h> #include <linux/uaccess.h> @@ -54,8 +56,8 @@ static inline void vcpu_cp15_reg64_set(struct kvm_vcpu *vcpu, const struct coproc_reg *r, u64 val) { - vcpu->arch.cp15[r->reg] = val & 0xffffffff; - vcpu->arch.cp15[r->reg + 1] = val >> 32; + vcpu_cp15(vcpu, r->reg) = val & 0xffffffff; + vcpu_cp15(vcpu, r->reg + 1) = val >> 32; } static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu, @@ -63,9 +65,9 @@ static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu, { u64 val; - val = vcpu->arch.cp15[r->reg + 1]; + val = vcpu_cp15(vcpu, r->reg + 1); val = val << 32; - val = val | vcpu->arch.cp15[r->reg]; + val = val | vcpu_cp15(vcpu, r->reg); return val; } @@ -104,7 +106,7 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) * vcpu_id, but we read the 'U' bit from the underlying * hardware directly. */ - vcpu->arch.cp15[c0_MPIDR] = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) | + vcpu_cp15(vcpu, c0_MPIDR) = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) | ((vcpu->vcpu_id >> 2) << MPIDR_LEVEL_BITS) | (vcpu->vcpu_id & 3)); } @@ -117,7 +119,7 @@ static bool access_actlr(struct kvm_vcpu *vcpu, if (p->is_write) return ignore_write(vcpu, p); - *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR]; + *vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c1_ACTLR); return true; } @@ -139,7 +141,7 @@ static bool access_l2ctlr(struct kvm_vcpu *vcpu, if (p->is_write) return ignore_write(vcpu, p); - *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR]; + *vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c9_L2CTLR); return true; } @@ -156,7 +158,7 @@ static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) ncores = min(ncores, 3U); l2ctlr |= (ncores & 3) << 24; - vcpu->arch.cp15[c9_L2CTLR] = l2ctlr; + vcpu_cp15(vcpu, c9_L2CTLR) = l2ctlr; } static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) @@ -171,7 +173,7 @@ static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) else actlr &= ~(1U << 6); - vcpu->arch.cp15[c1_ACTLR] = actlr; + vcpu_cp15(vcpu, c1_ACTLR) = actlr; } /* @@ -218,9 +220,9 @@ bool access_vm_reg(struct kvm_vcpu *vcpu, BUG_ON(!p->is_write); - vcpu->arch.cp15[r->reg] = *vcpu_reg(vcpu, p->Rt1); + vcpu_cp15(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt1); if (p->is_64bit) - vcpu->arch.cp15[r->reg + 1] = *vcpu_reg(vcpu, p->Rt2); + vcpu_cp15(vcpu, r->reg + 1) = *vcpu_reg(vcpu, p->Rt2); kvm_toggle_cache(vcpu, was_enabled); return true; @@ -381,17 +383,26 @@ static const struct coproc_reg cp15_regs[] = { { CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar}, }; +static int check_reg_table(const struct coproc_reg *table, unsigned int n) +{ + unsigned int i; + + for (i = 1; i < n; i++) { + if (cmp_reg(&table[i-1], &table[i]) >= 0) { + kvm_err("reg table %p out of order (%d)\n", table, i - 1); + return 1; + } + } + + return 0; +} + /* Target specific emulation tables */ static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS]; void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table) { - unsigned int i; - - for (i = 1; i < table->num; i++) - BUG_ON(cmp_reg(&table->table[i-1], - &table->table[i]) >= 0); - + BUG_ON(check_reg_table(table->table, table->num)); target_tables[table->target] = table; } @@ -405,29 +416,32 @@ static const struct coproc_reg *get_target_table(unsigned target, size_t *num) return table->table; } +#define reg_to_match_value(x) \ + ({ \ + unsigned long val; \ + val = (x)->CRn << 11; \ + val |= (x)->CRm << 7; \ + val |= (x)->Op1 << 4; \ + val |= (x)->Op2 << 1; \ + val |= !(x)->is_64bit; \ + val; \ + }) + +static int match_reg(const void *key, const void *elt) +{ + const unsigned long pval = (unsigned long)key; + const struct coproc_reg *r = elt; + + return pval - reg_to_match_value(r); +} + static const struct coproc_reg *find_reg(const struct coproc_params *params, const struct coproc_reg table[], unsigned int num) { - unsigned int i; - - for (i = 0; i < num; i++) { - const struct coproc_reg *r = &table[i]; - - if (params->is_64bit != r->is_64) - continue; - if (params->CRn != r->CRn) - continue; - if (params->CRm != r->CRm) - continue; - if (params->Op1 != r->Op1) - continue; - if (params->Op2 != r->Op2) - continue; + unsigned long pval = reg_to_match_value(params); - return r; - } - return NULL; + return bsearch((void *)pval, table, num, sizeof(table[0]), match_reg); } static int emulate_cp15(struct kvm_vcpu *vcpu, @@ -645,6 +659,9 @@ static struct coproc_reg invariant_cp15[] = { { CRn( 0), CRm( 0), Op1( 0), Op2( 3), is32, NULL, get_TLBTR }, { CRn( 0), CRm( 0), Op1( 0), Op2( 6), is32, NULL, get_REVIDR }, + { CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR }, + { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 0), is32, NULL, get_ID_PFR0 }, { CRn( 0), CRm( 1), Op1( 0), Op2( 1), is32, NULL, get_ID_PFR1 }, { CRn( 0), CRm( 1), Op1( 0), Op2( 2), is32, NULL, get_ID_DFR0 }, @@ -660,9 +677,6 @@ static struct coproc_reg invariant_cp15[] = { { CRn( 0), CRm( 2), Op1( 0), Op2( 3), is32, NULL, get_ID_ISAR3 }, { CRn( 0), CRm( 2), Op1( 0), Op2( 4), is32, NULL, get_ID_ISAR4 }, { CRn( 0), CRm( 2), Op1( 0), Op2( 5), is32, NULL, get_ID_ISAR5 }, - - { CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR }, - { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, }; /* @@ -901,7 +915,7 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) if (vfpid < num_fp_regs()) { if (KVM_REG_SIZE(id) != 8) return -ENOENT; - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid], + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpregs[vfpid], id); } @@ -911,13 +925,13 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) switch (vfpid) { case KVM_REG_ARM_VFP_FPEXC: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpexc, id); case KVM_REG_ARM_VFP_FPSCR: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpscr, id); case KVM_REG_ARM_VFP_FPINST: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst, id); case KVM_REG_ARM_VFP_FPINST2: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst2, id); case KVM_REG_ARM_VFP_MVFR0: val = fmrx(MVFR0); return reg_to_user(uaddr, &val, id); @@ -945,7 +959,7 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) if (vfpid < num_fp_regs()) { if (KVM_REG_SIZE(id) != 8) return -ENOENT; - return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid], + return reg_from_user(&vcpu->arch.ctxt.vfp.fpregs[vfpid], uaddr, id); } @@ -955,13 +969,13 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) switch (vfpid) { case KVM_REG_ARM_VFP_FPEXC: - return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpexc, uaddr, id); case KVM_REG_ARM_VFP_FPSCR: - return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpscr, uaddr, id); case KVM_REG_ARM_VFP_FPINST: - return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst, uaddr, id); case KVM_REG_ARM_VFP_FPINST2: - return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst2, uaddr, id); /* These are invariant. */ case KVM_REG_ARM_VFP_MVFR0: if (reg_from_user(&val, uaddr, id)) @@ -1030,7 +1044,7 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) val = vcpu_cp15_reg64_get(vcpu, r); ret = reg_to_user(uaddr, &val, reg->id); } else if (KVM_REG_SIZE(reg->id) == 4) { - ret = reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); + ret = reg_to_user(uaddr, &vcpu_cp15(vcpu, r->reg), reg->id); } return ret; @@ -1060,7 +1074,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) if (!ret) vcpu_cp15_reg64_set(vcpu, r, val); } else if (KVM_REG_SIZE(reg->id) == 4) { - ret = reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); + ret = reg_from_user(&vcpu_cp15(vcpu, r->reg), uaddr, reg->id); } return ret; @@ -1096,7 +1110,7 @@ static int write_demux_regids(u64 __user *uindices) static u64 cp15_to_index(const struct coproc_reg *reg) { u64 val = KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT); - if (reg->is_64) { + if (reg->is_64bit) { val |= KVM_REG_SIZE_U64; val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); /* @@ -1210,8 +1224,8 @@ void kvm_coproc_table_init(void) unsigned int i; /* Make sure tables are unique and in order. */ - for (i = 1; i < ARRAY_SIZE(cp15_regs); i++) - BUG_ON(cmp_reg(&cp15_regs[i-1], &cp15_regs[i]) >= 0); + BUG_ON(check_reg_table(cp15_regs, ARRAY_SIZE(cp15_regs))); + BUG_ON(check_reg_table(invariant_cp15, ARRAY_SIZE(invariant_cp15))); /* We abuse the reset function to overwrite the table itself. */ for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++) @@ -1248,7 +1262,7 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu) const struct coproc_reg *table; /* Catch someone adding a register without putting in reset entry. */ - memset(vcpu->arch.cp15, 0x42, sizeof(vcpu->arch.cp15)); + memset(vcpu->arch.ctxt.cp15, 0x42, sizeof(vcpu->arch.ctxt.cp15)); /* Generic chip reset first (so target could override). */ reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs)); @@ -1257,6 +1271,6 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu) reset_coproc_regs(vcpu, table, num); for (num = 1; num < NR_CP15_REGS; num++) - if (vcpu->arch.cp15[num] == 0x42424242) - panic("Didn't reset vcpu->arch.cp15[%zi]", num); + if (vcpu_cp15(vcpu, num) == 0x42424242) + panic("Didn't reset vcpu_cp15(vcpu, %zi)", num); } diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h index 88d24a3a9778..eef1759c2b65 100644 --- a/arch/arm/kvm/coproc.h +++ b/arch/arm/kvm/coproc.h @@ -37,7 +37,7 @@ struct coproc_reg { unsigned long Op1; unsigned long Op2; - bool is_64; + bool is_64bit; /* Trapped access from guest, if non-NULL. */ bool (*access)(struct kvm_vcpu *, @@ -47,7 +47,7 @@ struct coproc_reg { /* Initialization for vcpu. */ void (*reset)(struct kvm_vcpu *, const struct coproc_reg *); - /* Index into vcpu->arch.cp15[], or 0 if we don't need to save it. */ + /* Index into vcpu_cp15(vcpu, ...), or 0 if we don't need to save it. */ unsigned long reg; /* Value (usually reset value) */ @@ -104,25 +104,25 @@ static inline void reset_unknown(struct kvm_vcpu *vcpu, const struct coproc_reg *r) { BUG_ON(!r->reg); - BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15)); - vcpu->arch.cp15[r->reg] = 0xdecafbad; + BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); + vcpu_cp15(vcpu, r->reg) = 0xdecafbad; } static inline void reset_val(struct kvm_vcpu *vcpu, const struct coproc_reg *r) { BUG_ON(!r->reg); - BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15)); - vcpu->arch.cp15[r->reg] = r->val; + BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); + vcpu_cp15(vcpu, r->reg) = r->val; } static inline void reset_unknown64(struct kvm_vcpu *vcpu, const struct coproc_reg *r) { BUG_ON(!r->reg); - BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.cp15)); + BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); - vcpu->arch.cp15[r->reg] = 0xdecafbad; - vcpu->arch.cp15[r->reg+1] = 0xd0c0ffee; + vcpu_cp15(vcpu, r->reg) = 0xdecafbad; + vcpu_cp15(vcpu, r->reg+1) = 0xd0c0ffee; } static inline int cmp_reg(const struct coproc_reg *i1, @@ -141,7 +141,7 @@ static inline int cmp_reg(const struct coproc_reg *i1, return i1->Op1 - i2->Op1; if (i1->Op2 != i2->Op2) return i1->Op2 - i2->Op2; - return i2->is_64 - i1->is_64; + return i2->is_64bit - i1->is_64bit; } @@ -150,8 +150,8 @@ static inline int cmp_reg(const struct coproc_reg *i1, #define CRm64(_x) .CRn = _x, .CRm = 0 #define Op1(_x) .Op1 = _x #define Op2(_x) .Op2 = _x -#define is64 .is_64 = true -#define is32 .is_64 = false +#define is64 .is_64bit = true +#define is32 .is_64bit = false bool access_vm_reg(struct kvm_vcpu *vcpu, const struct coproc_params *p, diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index dc99159857b4..a494def3f195 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -112,7 +112,7 @@ static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = { */ unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) { - unsigned long *reg_array = (unsigned long *)&vcpu->arch.regs; + unsigned long *reg_array = (unsigned long *)&vcpu->arch.ctxt.gp_regs; unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { @@ -147,15 +147,15 @@ unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu) unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { case SVC_MODE: - return &vcpu->arch.regs.KVM_ARM_SVC_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_SVC_spsr; case ABT_MODE: - return &vcpu->arch.regs.KVM_ARM_ABT_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_ABT_spsr; case UND_MODE: - return &vcpu->arch.regs.KVM_ARM_UND_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_UND_spsr; case IRQ_MODE: - return &vcpu->arch.regs.KVM_ARM_IRQ_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_IRQ_spsr; case FIQ_MODE: - return &vcpu->arch.regs.KVM_ARM_FIQ_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_FIQ_spsr; default: BUG(); } @@ -266,8 +266,8 @@ void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr) static u32 exc_vector_base(struct kvm_vcpu *vcpu) { - u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; - u32 vbar = vcpu->arch.cp15[c12_VBAR]; + u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); + u32 vbar = vcpu_cp15(vcpu, c12_VBAR); if (sctlr & SCTLR_V) return 0xffff0000; @@ -282,7 +282,7 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu) static void kvm_update_psr(struct kvm_vcpu *vcpu, unsigned long mode) { unsigned long cpsr = *vcpu_cpsr(vcpu); - u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; + u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | mode; @@ -357,22 +357,22 @@ static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr) if (is_pabt) { /* Set IFAR and IFSR */ - vcpu->arch.cp15[c6_IFAR] = addr; - is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31); + vcpu_cp15(vcpu, c6_IFAR) = addr; + is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); /* Always give debug fault for now - should give guest a clue */ if (is_lpae) - vcpu->arch.cp15[c5_IFSR] = 1 << 9 | 0x22; + vcpu_cp15(vcpu, c5_IFSR) = 1 << 9 | 0x22; else - vcpu->arch.cp15[c5_IFSR] = 2; + vcpu_cp15(vcpu, c5_IFSR) = 2; } else { /* !iabt */ /* Set DFAR and DFSR */ - vcpu->arch.cp15[c6_DFAR] = addr; - is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31); + vcpu_cp15(vcpu, c6_DFAR) = addr; + is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); /* Always give debug fault for now - should give guest a clue */ if (is_lpae) - vcpu->arch.cp15[c5_DFSR] = 1 << 9 | 0x22; + vcpu_cp15(vcpu, c5_DFSR) = 1 << 9 | 0x22; else - vcpu->arch.cp15[c5_DFSR] = 2; + vcpu_cp15(vcpu, c5_DFSR) = 2; } } diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 5fa69d7bae58..9093ed0f8b2a 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -25,7 +25,6 @@ #include <asm/cputype.h> #include <asm/uaccess.h> #include <asm/kvm.h> -#include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> #include <asm/kvm_coproc.h> @@ -55,7 +54,7 @@ static u64 core_reg_offset_from_id(u64 id) static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { u32 __user *uaddr = (u32 __user *)(long)reg->addr; - struct kvm_regs *regs = &vcpu->arch.regs; + struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs; u64 off; if (KVM_REG_SIZE(reg->id) != 4) @@ -72,7 +71,7 @@ static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { u32 __user *uaddr = (u32 __user *)(long)reg->addr; - struct kvm_regs *regs = &vcpu->arch.regs; + struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs; u64 off, val; if (KVM_REG_SIZE(reg->id) != 4) @@ -161,7 +160,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) u64 val; val = kvm_arm_timer_get_reg(vcpu, reg->id); - return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)); + return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0; } static unsigned long num_core_regs(void) diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 3ede90d8b20b..3f1ef0dbc899 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -147,13 +147,6 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, switch (exception_index) { case ARM_EXCEPTION_IRQ: return 1; - case ARM_EXCEPTION_UNDEFINED: - kvm_err("Undefined exception in Hyp mode at: %#08lx\n", - kvm_vcpu_get_hyp_pc(vcpu)); - BUG(); - panic("KVM: Hypervisor undefined exception!\n"); - case ARM_EXCEPTION_DATA_ABORT: - case ARM_EXCEPTION_PREF_ABORT: case ARM_EXCEPTION_HVC: /* * See ARM ARM B1.14.1: "Hyp traps on instructions diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile new file mode 100644 index 000000000000..8dfa5f7f9290 --- /dev/null +++ b/arch/arm/kvm/hyp/Makefile @@ -0,0 +1,17 @@ +# +# Makefile for Kernel-based Virtual Machine module, HYP part +# + +KVM=../../../../virt/kvm + +obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o + +obj-$(CONFIG_KVM_ARM_HOST) += tlb.o +obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += vfp.o +obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += entry.o +obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o +obj-$(CONFIG_KVM_ARM_HOST) += switch.o +obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o diff --git a/arch/arm/kvm/hyp/banked-sr.c b/arch/arm/kvm/hyp/banked-sr.c new file mode 100644 index 000000000000..111bda8cdebd --- /dev/null +++ b/arch/arm/kvm/hyp/banked-sr.c @@ -0,0 +1,77 @@ +/* + * Original code: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_hyp.h> + +__asm__(".arch_extension virt"); + +void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt) +{ + ctxt->gp_regs.usr_regs.ARM_sp = read_special(SP_usr); + ctxt->gp_regs.usr_regs.ARM_pc = read_special(ELR_hyp); + ctxt->gp_regs.usr_regs.ARM_cpsr = read_special(SPSR); + ctxt->gp_regs.KVM_ARM_SVC_sp = read_special(SP_svc); + ctxt->gp_regs.KVM_ARM_SVC_lr = read_special(LR_svc); + ctxt->gp_regs.KVM_ARM_SVC_spsr = read_special(SPSR_svc); + ctxt->gp_regs.KVM_ARM_ABT_sp = read_special(SP_abt); + ctxt->gp_regs.KVM_ARM_ABT_lr = read_special(LR_abt); + ctxt->gp_regs.KVM_ARM_ABT_spsr = read_special(SPSR_abt); + ctxt->gp_regs.KVM_ARM_UND_sp = read_special(SP_und); + ctxt->gp_regs.KVM_ARM_UND_lr = read_special(LR_und); + ctxt->gp_regs.KVM_ARM_UND_spsr = read_special(SPSR_und); + ctxt->gp_regs.KVM_ARM_IRQ_sp = read_special(SP_irq); + ctxt->gp_regs.KVM_ARM_IRQ_lr = read_special(LR_irq); + ctxt->gp_regs.KVM_ARM_IRQ_spsr = read_special(SPSR_irq); + ctxt->gp_regs.KVM_ARM_FIQ_r8 = read_special(R8_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_r9 = read_special(R9_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_r10 = read_special(R10_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_fp = read_special(R11_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_ip = read_special(R12_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_sp = read_special(SP_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_lr = read_special(LR_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_spsr = read_special(SPSR_fiq); +} + +void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt) +{ + write_special(ctxt->gp_regs.usr_regs.ARM_sp, SP_usr); + write_special(ctxt->gp_regs.usr_regs.ARM_pc, ELR_hyp); + write_special(ctxt->gp_regs.usr_regs.ARM_cpsr, SPSR_cxsf); + write_special(ctxt->gp_regs.KVM_ARM_SVC_sp, SP_svc); + write_special(ctxt->gp_regs.KVM_ARM_SVC_lr, LR_svc); + write_special(ctxt->gp_regs.KVM_ARM_SVC_spsr, SPSR_svc); + write_special(ctxt->gp_regs.KVM_ARM_ABT_sp, SP_abt); + write_special(ctxt->gp_regs.KVM_ARM_ABT_lr, LR_abt); + write_special(ctxt->gp_regs.KVM_ARM_ABT_spsr, SPSR_abt); + write_special(ctxt->gp_regs.KVM_ARM_UND_sp, SP_und); + write_special(ctxt->gp_regs.KVM_ARM_UND_lr, LR_und); + write_special(ctxt->gp_regs.KVM_ARM_UND_spsr, SPSR_und); + write_special(ctxt->gp_regs.KVM_ARM_IRQ_sp, SP_irq); + write_special(ctxt->gp_regs.KVM_ARM_IRQ_lr, LR_irq); + write_special(ctxt->gp_regs.KVM_ARM_IRQ_spsr, SPSR_irq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_r8, R8_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_r9, R9_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_r10, R10_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_fp, R11_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_ip, R12_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_sp, SP_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_lr, LR_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_spsr, SPSR_fiq); +} diff --git a/arch/arm/kvm/hyp/cp15-sr.c b/arch/arm/kvm/hyp/cp15-sr.c new file mode 100644 index 000000000000..c4782812714c --- /dev/null +++ b/arch/arm/kvm/hyp/cp15-sr.c @@ -0,0 +1,84 @@ +/* + * Original code: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_hyp.h> + +static u64 *cp15_64(struct kvm_cpu_context *ctxt, int idx) +{ + return (u64 *)(ctxt->cp15 + idx); +} + +void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt) +{ + ctxt->cp15[c0_MPIDR] = read_sysreg(VMPIDR); + ctxt->cp15[c0_CSSELR] = read_sysreg(CSSELR); + ctxt->cp15[c1_SCTLR] = read_sysreg(SCTLR); + ctxt->cp15[c1_CPACR] = read_sysreg(CPACR); + *cp15_64(ctxt, c2_TTBR0) = read_sysreg(TTBR0); + *cp15_64(ctxt, c2_TTBR1) = read_sysreg(TTBR1); + ctxt->cp15[c2_TTBCR] = read_sysreg(TTBCR); + ctxt->cp15[c3_DACR] = read_sysreg(DACR); + ctxt->cp15[c5_DFSR] = read_sysreg(DFSR); + ctxt->cp15[c5_IFSR] = read_sysreg(IFSR); + ctxt->cp15[c5_ADFSR] = read_sysreg(ADFSR); + ctxt->cp15[c5_AIFSR] = read_sysreg(AIFSR); + ctxt->cp15[c6_DFAR] = read_sysreg(DFAR); + ctxt->cp15[c6_IFAR] = read_sysreg(IFAR); + *cp15_64(ctxt, c7_PAR) = read_sysreg(PAR); + ctxt->cp15[c10_PRRR] = read_sysreg(PRRR); + ctxt->cp15[c10_NMRR] = read_sysreg(NMRR); + ctxt->cp15[c10_AMAIR0] = read_sysreg(AMAIR0); + ctxt->cp15[c10_AMAIR1] = read_sysreg(AMAIR1); + ctxt->cp15[c12_VBAR] = read_sysreg(VBAR); + ctxt->cp15[c13_CID] = read_sysreg(CID); + ctxt->cp15[c13_TID_URW] = read_sysreg(TID_URW); + ctxt->cp15[c13_TID_URO] = read_sysreg(TID_URO); + ctxt->cp15[c13_TID_PRIV] = read_sysreg(TID_PRIV); + ctxt->cp15[c14_CNTKCTL] = read_sysreg(CNTKCTL); +} + +void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt) +{ + write_sysreg(ctxt->cp15[c0_MPIDR], VMPIDR); + write_sysreg(ctxt->cp15[c0_CSSELR], CSSELR); + write_sysreg(ctxt->cp15[c1_SCTLR], SCTLR); + write_sysreg(ctxt->cp15[c1_CPACR], CPACR); + write_sysreg(*cp15_64(ctxt, c2_TTBR0), TTBR0); + write_sysreg(*cp15_64(ctxt, c2_TTBR1), TTBR1); + write_sysreg(ctxt->cp15[c2_TTBCR], TTBCR); + write_sysreg(ctxt->cp15[c3_DACR], DACR); + write_sysreg(ctxt->cp15[c5_DFSR], DFSR); + write_sysreg(ctxt->cp15[c5_IFSR], IFSR); + write_sysreg(ctxt->cp15[c5_ADFSR], ADFSR); + write_sysreg(ctxt->cp15[c5_AIFSR], AIFSR); + write_sysreg(ctxt->cp15[c6_DFAR], DFAR); + write_sysreg(ctxt->cp15[c6_IFAR], IFAR); + write_sysreg(*cp15_64(ctxt, c7_PAR), PAR); + write_sysreg(ctxt->cp15[c10_PRRR], PRRR); + write_sysreg(ctxt->cp15[c10_NMRR], NMRR); + write_sysreg(ctxt->cp15[c10_AMAIR0], AMAIR0); + write_sysreg(ctxt->cp15[c10_AMAIR1], AMAIR1); + write_sysreg(ctxt->cp15[c12_VBAR], VBAR); + write_sysreg(ctxt->cp15[c13_CID], CID); + write_sysreg(ctxt->cp15[c13_TID_URW], TID_URW); + write_sysreg(ctxt->cp15[c13_TID_URO], TID_URO); + write_sysreg(ctxt->cp15[c13_TID_PRIV], TID_PRIV); + write_sysreg(ctxt->cp15[c14_CNTKCTL], CNTKCTL); +} diff --git a/arch/arm/kvm/hyp/entry.S b/arch/arm/kvm/hyp/entry.S new file mode 100644 index 000000000000..21c238871c9e --- /dev/null +++ b/arch/arm/kvm/hyp/entry.S @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2016 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/kvm_arm.h> + + .arch_extension virt + + .text + .pushsection .hyp.text, "ax" + +#define USR_REGS_OFFSET (CPU_CTXT_GP_REGS + GP_REGS_USR) + +/* int __guest_enter(struct kvm_vcpu *vcpu, struct kvm_cpu_context *host) */ +ENTRY(__guest_enter) + @ Save host registers + add r1, r1, #(USR_REGS_OFFSET + S_R4) + stm r1!, {r4-r12} + str lr, [r1, #4] @ Skip SP_usr (already saved) + + @ Restore guest registers + add r0, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0) + ldr lr, [r0, #S_LR] + ldm r0, {r0-r12} + + clrex + eret +ENDPROC(__guest_enter) + +ENTRY(__guest_exit) + /* + * return convention: + * guest r0, r1, r2 saved on the stack + * r0: vcpu pointer + * r1: exception code + */ + + add r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R3) + stm r2!, {r3-r12} + str lr, [r2, #4] + add r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0) + pop {r3, r4, r5} @ r0, r1, r2 + stm r2, {r3-r5} + + ldr r0, [r0, #VCPU_HOST_CTXT] + add r0, r0, #(USR_REGS_OFFSET + S_R4) + ldm r0!, {r4-r12} + ldr lr, [r0, #4] + + mov r0, r1 + bx lr +ENDPROC(__guest_exit) + +/* + * If VFPv3 support is not available, then we will not switch the VFP + * registers; however cp10 and cp11 accesses will still trap and fallback + * to the regular coprocessor emulation code, which currently will + * inject an undefined exception to the guest. + */ +#ifdef CONFIG_VFPv3 +ENTRY(__vfp_guest_restore) + push {r3, r4, lr} + + @ NEON/VFP used. Turn on VFP access. + mrc p15, 4, r1, c1, c1, 2 @ HCPTR + bic r1, r1, #(HCPTR_TCP(10) | HCPTR_TCP(11)) + mcr p15, 4, r1, c1, c1, 2 @ HCPTR + isb + + @ Switch VFP/NEON hardware state to the guest's + mov r4, r0 + ldr r0, [r0, #VCPU_HOST_CTXT] + add r0, r0, #CPU_CTXT_VFP + bl __vfp_save_state + add r0, r4, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP) + bl __vfp_restore_state + + pop {r3, r4, lr} + pop {r0, r1, r2} + clrex + eret +ENDPROC(__vfp_guest_restore) +#endif + + .popsection + diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S new file mode 100644 index 000000000000..78091383a5d9 --- /dev/null +++ b/arch/arm/kvm/hyp/hyp-entry.S @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/linkage.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_asm.h> + + .arch_extension virt + + .text + .pushsection .hyp.text, "ax" + +.macro load_vcpu reg + mrc p15, 4, \reg, c13, c0, 2 @ HTPIDR +.endm + +/******************************************************************** + * Hypervisor exception vector and handlers + * + * + * The KVM/ARM Hypervisor ABI is defined as follows: + * + * Entry to Hyp mode from the host kernel will happen _only_ when an HVC + * instruction is issued since all traps are disabled when running the host + * kernel as per the Hyp-mode initialization at boot time. + * + * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc + * below) when the HVC instruction is called from SVC mode (i.e. a guest or the + * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC + * instructions are called from within Hyp-mode. + * + * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): + * Switching to Hyp mode is done through a simple HVC #0 instruction. The + * exception vector code will check that the HVC comes from VMID==0. + * - r0 contains a pointer to a HYP function + * - r1, r2, and r3 contain arguments to the above function. + * - The HYP function will be called with its arguments in r0, r1 and r2. + * On HYP function return, we return directly to SVC. + * + * Note that the above is used to execute code in Hyp-mode from a host-kernel + * point of view, and is a different concept from performing a world-switch and + * executing guest code SVC mode (with a VMID != 0). + */ + + .align 5 +__kvm_hyp_vector: + .global __kvm_hyp_vector + + @ Hyp-mode exception vector + W(b) hyp_reset + W(b) hyp_undef + W(b) hyp_svc + W(b) hyp_pabt + W(b) hyp_dabt + W(b) hyp_hvc + W(b) hyp_irq + W(b) hyp_fiq + +.macro invalid_vector label, cause + .align +\label: mov r0, #\cause + b __hyp_panic +.endm + + invalid_vector hyp_reset ARM_EXCEPTION_RESET + invalid_vector hyp_undef ARM_EXCEPTION_UNDEFINED + invalid_vector hyp_svc ARM_EXCEPTION_SOFTWARE + invalid_vector hyp_pabt ARM_EXCEPTION_PREF_ABORT + invalid_vector hyp_dabt ARM_EXCEPTION_DATA_ABORT + invalid_vector hyp_fiq ARM_EXCEPTION_FIQ + +ENTRY(__hyp_do_panic) + mrs lr, cpsr + bic lr, lr, #MODE_MASK + orr lr, lr, #SVC_MODE +THUMB( orr lr, lr, #PSR_T_BIT ) + msr spsr_cxsf, lr + ldr lr, =panic + msr ELR_hyp, lr + ldr lr, =kvm_call_hyp + clrex + eret +ENDPROC(__hyp_do_panic) + +hyp_hvc: + /* + * Getting here is either because of a trap from a guest, + * or from executing HVC from the host kernel, which means + * "do something in Hyp mode". + */ + push {r0, r1, r2} + + @ Check syndrome register + mrc p15, 4, r1, c5, c2, 0 @ HSR + lsr r0, r1, #HSR_EC_SHIFT + cmp r0, #HSR_EC_HVC + bne guest_trap @ Not HVC instr. + + /* + * Let's check if the HVC came from VMID 0 and allow simple + * switch to Hyp mode + */ + mrrc p15, 6, r0, r2, c2 + lsr r2, r2, #16 + and r2, r2, #0xff + cmp r2, #0 + bne guest_trap @ Guest called HVC + + /* + * Getting here means host called HVC, we shift parameters and branch + * to Hyp function. + */ + pop {r0, r1, r2} + + /* Check for __hyp_get_vectors */ + cmp r0, #-1 + mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR + beq 1f + + push {lr} + + mov lr, r0 + mov r0, r1 + mov r1, r2 + mov r2, r3 + +THUMB( orr lr, #1) + blx lr @ Call the HYP function + + pop {lr} +1: eret + +guest_trap: + load_vcpu r0 @ Load VCPU pointer to r0 + +#ifdef CONFIG_VFPv3 + @ Check for a VFP access + lsr r1, r1, #HSR_EC_SHIFT + cmp r1, #HSR_EC_CP_0_13 + beq __vfp_guest_restore +#endif + + mov r1, #ARM_EXCEPTION_HVC + b __guest_exit + +hyp_irq: + push {r0, r1, r2} + mov r1, #ARM_EXCEPTION_IRQ + load_vcpu r0 @ Load VCPU pointer to r0 + b __guest_exit + + .ltorg + + .popsection diff --git a/arch/arm/kvm/hyp/s2-setup.c b/arch/arm/kvm/hyp/s2-setup.c new file mode 100644 index 000000000000..7be39af2ed6c --- /dev/null +++ b/arch/arm/kvm/hyp/s2-setup.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2016 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/types.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_hyp.h> + +void __hyp_text __init_stage2_translation(void) +{ + u64 val; + + val = read_sysreg(VTCR) & ~VTCR_MASK; + + val |= read_sysreg(HTCR) & VTCR_HTCR_SH; + val |= KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S; + + write_sysreg(val, VTCR); +} diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c new file mode 100644 index 000000000000..b13caa90cd44 --- /dev/null +++ b/arch/arm/kvm/hyp/switch.c @@ -0,0 +1,232 @@ +/* + * Copyright (C) 2015 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_asm.h> +#include <asm/kvm_hyp.h> + +__asm__(".arch_extension virt"); + +/* + * Activate the traps, saving the host's fpexc register before + * overwriting it. We'll restore it on VM exit. + */ +static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu, u32 *fpexc_host) +{ + u32 val; + + /* + * We are about to set HCPTR.TCP10/11 to trap all floating point + * register accesses to HYP, however, the ARM ARM clearly states that + * traps are only taken to HYP if the operation would not otherwise + * trap to SVC. Therefore, always make sure that for 32-bit guests, + * we set FPEXC.EN to prevent traps to SVC, when setting the TCP bits. + */ + val = read_sysreg(VFP_FPEXC); + *fpexc_host = val; + if (!(val & FPEXC_EN)) { + write_sysreg(val | FPEXC_EN, VFP_FPEXC); + isb(); + } + + write_sysreg(vcpu->arch.hcr | vcpu->arch.irq_lines, HCR); + /* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */ + write_sysreg(HSTR_T(15), HSTR); + write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR); + val = read_sysreg(HDCR); + write_sysreg(val | HDCR_TPM | HDCR_TPMCR, HDCR); +} + +static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) +{ + u32 val; + + write_sysreg(0, HCR); + write_sysreg(0, HSTR); + val = read_sysreg(HDCR); + write_sysreg(val & ~(HDCR_TPM | HDCR_TPMCR), HDCR); + write_sysreg(0, HCPTR); +} + +static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(vcpu->kvm); + write_sysreg(kvm->arch.vttbr, VTTBR); + write_sysreg(vcpu->arch.midr, VPIDR); +} + +static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu) +{ + write_sysreg(0, VTTBR); + write_sysreg(read_sysreg(MIDR), VPIDR); +} + +static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu) +{ + __vgic_v2_save_state(vcpu); +} + +static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu) +{ + __vgic_v2_restore_state(vcpu); +} + +static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) +{ + u32 hsr = read_sysreg(HSR); + u8 ec = hsr >> HSR_EC_SHIFT; + u32 hpfar, far; + + vcpu->arch.fault.hsr = hsr; + + if (ec == HSR_EC_IABT) + far = read_sysreg(HIFAR); + else if (ec == HSR_EC_DABT) + far = read_sysreg(HDFAR); + else + return true; + + /* + * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode: + * + * Abort on the stage 2 translation for a memory access from a + * Non-secure PL1 or PL0 mode: + * + * For any Access flag fault or Translation fault, and also for any + * Permission fault on the stage 2 translation of a memory access + * made as part of a translation table walk for a stage 1 translation, + * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR + * is UNKNOWN. + */ + if (!(hsr & HSR_DABT_S1PTW) && (hsr & HSR_FSC_TYPE) == FSC_PERM) { + u64 par, tmp; + + par = read_sysreg(PAR); + write_sysreg(far, ATS1CPR); + isb(); + + tmp = read_sysreg(PAR); + write_sysreg(par, PAR); + + if (unlikely(tmp & 1)) + return false; /* Translation failed, back to guest */ + + hpfar = ((tmp >> 12) & ((1UL << 28) - 1)) << 4; + } else { + hpfar = read_sysreg(HPFAR); + } + + vcpu->arch.fault.hxfar = far; + vcpu->arch.fault.hpfar = hpfar; + return true; +} + +static int __hyp_text __guest_run(struct kvm_vcpu *vcpu) +{ + struct kvm_cpu_context *host_ctxt; + struct kvm_cpu_context *guest_ctxt; + bool fp_enabled; + u64 exit_code; + u32 fpexc; + + vcpu = kern_hyp_va(vcpu); + write_sysreg(vcpu, HTPIDR); + + host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); + guest_ctxt = &vcpu->arch.ctxt; + + __sysreg_save_state(host_ctxt); + __banked_save_state(host_ctxt); + + __activate_traps(vcpu, &fpexc); + __activate_vm(vcpu); + + __vgic_restore_state(vcpu); + __timer_restore_state(vcpu); + + __sysreg_restore_state(guest_ctxt); + __banked_restore_state(guest_ctxt); + + /* Jump in the fire! */ +again: + exit_code = __guest_enter(vcpu, host_ctxt); + /* And we're baaack! */ + + if (exit_code == ARM_EXCEPTION_HVC && !__populate_fault_info(vcpu)) + goto again; + + fp_enabled = __vfp_enabled(); + + __banked_save_state(guest_ctxt); + __sysreg_save_state(guest_ctxt); + __timer_save_state(vcpu); + __vgic_save_state(vcpu); + + __deactivate_traps(vcpu); + __deactivate_vm(vcpu); + + __banked_restore_state(host_ctxt); + __sysreg_restore_state(host_ctxt); + + if (fp_enabled) { + __vfp_save_state(&guest_ctxt->vfp); + __vfp_restore_state(&host_ctxt->vfp); + } + + write_sysreg(fpexc, VFP_FPEXC); + + return exit_code; +} + +__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu); + +static const char * const __hyp_panic_string[] = { + [ARM_EXCEPTION_RESET] = "\nHYP panic: RST PC:%08x CPSR:%08x", + [ARM_EXCEPTION_UNDEFINED] = "\nHYP panic: UNDEF PC:%08x CPSR:%08x", + [ARM_EXCEPTION_SOFTWARE] = "\nHYP panic: SVC PC:%08x CPSR:%08x", + [ARM_EXCEPTION_PREF_ABORT] = "\nHYP panic: PABRT PC:%08x CPSR:%08x", + [ARM_EXCEPTION_DATA_ABORT] = "\nHYP panic: DABRT PC:%08x ADDR:%08x", + [ARM_EXCEPTION_IRQ] = "\nHYP panic: IRQ PC:%08x CPSR:%08x", + [ARM_EXCEPTION_FIQ] = "\nHYP panic: FIQ PC:%08x CPSR:%08x", + [ARM_EXCEPTION_HVC] = "\nHYP panic: HVC PC:%08x CPSR:%08x", +}; + +void __hyp_text __noreturn __hyp_panic(int cause) +{ + u32 elr = read_special(ELR_hyp); + u32 val; + + if (cause == ARM_EXCEPTION_DATA_ABORT) + val = read_sysreg(HDFAR); + else + val = read_special(SPSR); + + if (read_sysreg(VTTBR)) { + struct kvm_vcpu *vcpu; + struct kvm_cpu_context *host_ctxt; + + vcpu = (struct kvm_vcpu *)read_sysreg(HTPIDR); + host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); + __deactivate_traps(vcpu); + __deactivate_vm(vcpu); + __sysreg_restore_state(host_ctxt); + } + + /* Call panic for real */ + __hyp_do_panic(__hyp_panic_string[cause], elr, val); + + unreachable(); +} diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c new file mode 100644 index 000000000000..a2636001e616 --- /dev/null +++ b/arch/arm/kvm/hyp/tlb.c @@ -0,0 +1,70 @@ +/* + * Original code: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_hyp.h> + +/** + * Flush per-VMID TLBs + * + * __kvm_tlb_flush_vmid(struct kvm *kvm); + * + * We rely on the hardware to broadcast the TLB invalidation to all CPUs + * inside the inner-shareable domain (which is the case for all v7 + * implementations). If we come across a non-IS SMP implementation, we'll + * have to use an IPI based mechanism. Until then, we stick to the simple + * hardware assisted version. + * + * As v7 does not support flushing per IPA, just nuke the whole TLB + * instead, ignoring the ipa value. + */ +static void __hyp_text __tlb_flush_vmid(struct kvm *kvm) +{ + dsb(ishst); + + /* Switch to requested VMID */ + kvm = kern_hyp_va(kvm); + write_sysreg(kvm->arch.vttbr, VTTBR); + isb(); + + write_sysreg(0, TLBIALLIS); + dsb(ish); + isb(); + + write_sysreg(0, VTTBR); +} + +__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm); + +static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) +{ + __tlb_flush_vmid(kvm); +} + +__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, + phys_addr_t ipa); + +static void __hyp_text __tlb_flush_vm_context(void) +{ + write_sysreg(0, TLBIALLNSNHIS); + write_sysreg(0, ICIALLUIS); + dsb(ish); +} + +__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void); diff --git a/arch/arm/kvm/hyp/vfp.S b/arch/arm/kvm/hyp/vfp.S new file mode 100644 index 000000000000..7c297e87eb8b --- /dev/null +++ b/arch/arm/kvm/hyp/vfp.S @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/linkage.h> +#include <asm/vfpmacros.h> + + .text + .pushsection .hyp.text, "ax" + +/* void __vfp_save_state(struct vfp_hard_struct *vfp); */ +ENTRY(__vfp_save_state) + push {r4, r5} + VFPFMRX r1, FPEXC + + @ Make sure *really* VFP is enabled so we can touch the registers. + orr r5, r1, #FPEXC_EN + tst r5, #FPEXC_EX @ Check for VFP Subarchitecture + bic r5, r5, #FPEXC_EX @ FPEXC_EX disable + VFPFMXR FPEXC, r5 + isb + + VFPFMRX r2, FPSCR + beq 1f + + @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so + @ we only need to save them if FPEXC_EX is set. + VFPFMRX r3, FPINST + tst r5, #FPEXC_FP2V + VFPFMRX r4, FPINST2, ne @ vmrsne +1: + VFPFSTMIA r0, r5 @ Save VFP registers + stm r0, {r1-r4} @ Save FPEXC, FPSCR, FPINST, FPINST2 + pop {r4, r5} + bx lr +ENDPROC(__vfp_save_state) + +/* void __vfp_restore_state(struct vfp_hard_struct *vfp); + * Assume FPEXC_EN is on and FPEXC_EX is off */ +ENTRY(__vfp_restore_state) + VFPFLDMIA r0, r1 @ Load VFP registers + ldm r0, {r0-r3} @ Load FPEXC, FPSCR, FPINST, FPINST2 + + VFPFMXR FPSCR, r1 + tst r0, #FPEXC_EX @ Check for VFP Subarchitecture + beq 1f + VFPFMXR FPINST, r2 + tst r0, #FPEXC_FP2V + VFPFMXR FPINST2, r3, ne +1: + VFPFMXR FPEXC, r0 @ FPEXC (last, in case !EN) + bx lr +ENDPROC(__vfp_restore_state) + + .popsection diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 3988e72d16ff..1f9ae17476f9 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -84,14 +84,6 @@ __do_hyp_init: orr r0, r0, r1 mcr p15, 4, r0, c2, c0, 2 @ HTCR - mrc p15, 4, r1, c2, c1, 2 @ VTCR - ldr r2, =VTCR_MASK - bic r1, r1, r2 - bic r0, r0, #(~VTCR_HTCR_SH) @ clear non-reusable HTCR bits - orr r1, r0, r1 - orr r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S) - mcr p15, 4, r1, c2, c1, 2 @ VTCR - @ Use the same memory attributes for hyp. accesses as the kernel @ (copy MAIRx ro HMAIRx). mrc p15, 0, r0, c10, c2, 0 diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 900ef6dd8f72..b1bd316f14c0 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -17,211 +17,14 @@ */ #include <linux/linkage.h> -#include <linux/const.h> -#include <asm/unified.h> -#include <asm/page.h> -#include <asm/ptrace.h> -#include <asm/asm-offsets.h> -#include <asm/kvm_asm.h> -#include <asm/kvm_arm.h> -#include <asm/vfpmacros.h> -#include "interrupts_head.S" .text -__kvm_hyp_code_start: - .globl __kvm_hyp_code_start - -/******************************************************************** - * Flush per-VMID TLBs - * - * void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); - * - * We rely on the hardware to broadcast the TLB invalidation to all CPUs - * inside the inner-shareable domain (which is the case for all v7 - * implementations). If we come across a non-IS SMP implementation, we'll - * have to use an IPI based mechanism. Until then, we stick to the simple - * hardware assisted version. - * - * As v7 does not support flushing per IPA, just nuke the whole TLB - * instead, ignoring the ipa value. - */ -ENTRY(__kvm_tlb_flush_vmid_ipa) - push {r2, r3} - - dsb ishst - add r0, r0, #KVM_VTTBR - ldrd r2, r3, [r0] - mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR - isb - mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) - dsb ish - isb - mov r2, #0 - mov r3, #0 - mcrr p15, 6, r2, r3, c2 @ Back to VMID #0 - isb @ Not necessary if followed by eret - - pop {r2, r3} - bx lr -ENDPROC(__kvm_tlb_flush_vmid_ipa) - -/** - * void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs - * - * Reuses __kvm_tlb_flush_vmid_ipa() for ARMv7, without passing address - * parameter - */ - -ENTRY(__kvm_tlb_flush_vmid) - b __kvm_tlb_flush_vmid_ipa -ENDPROC(__kvm_tlb_flush_vmid) - -/******************************************************************** - * Flush TLBs and instruction caches of all CPUs inside the inner-shareable - * domain, for all VMIDs - * - * void __kvm_flush_vm_context(void); - */ -ENTRY(__kvm_flush_vm_context) - mov r0, #0 @ rn parameter for c15 flushes is SBZ - - /* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */ - mcr p15, 4, r0, c8, c3, 4 - /* Invalidate instruction caches Inner Shareable (ICIALLUIS) */ - mcr p15, 0, r0, c7, c1, 0 - dsb ish - isb @ Not necessary if followed by eret - - bx lr -ENDPROC(__kvm_flush_vm_context) - - -/******************************************************************** - * Hypervisor world-switch code - * - * - * int __kvm_vcpu_run(struct kvm_vcpu *vcpu) - */ -ENTRY(__kvm_vcpu_run) - @ Save the vcpu pointer - mcr p15, 4, vcpu, c13, c0, 2 @ HTPIDR - - save_host_regs - - restore_vgic_state - restore_timer_state - - @ Store hardware CP15 state and load guest state - read_cp15_state store_to_vcpu = 0 - write_cp15_state read_from_vcpu = 1 - - @ If the host kernel has not been configured with VFPv3 support, - @ then it is safer if we deny guests from using it as well. -#ifdef CONFIG_VFPv3 - @ Set FPEXC_EN so the guest doesn't trap floating point instructions - VFPFMRX r2, FPEXC @ VMRS - push {r2} - orr r2, r2, #FPEXC_EN - VFPFMXR FPEXC, r2 @ VMSR -#endif - - @ Configure Hyp-role - configure_hyp_role vmentry - - @ Trap coprocessor CRx accesses - set_hstr vmentry - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) - set_hdcr vmentry - - @ Write configured ID register into MIDR alias - ldr r1, [vcpu, #VCPU_MIDR] - mcr p15, 4, r1, c0, c0, 0 - - @ Write guest view of MPIDR into VMPIDR - ldr r1, [vcpu, #CP15_OFFSET(c0_MPIDR)] - mcr p15, 4, r1, c0, c0, 5 - - @ Set up guest memory translation - ldr r1, [vcpu, #VCPU_KVM] - add r1, r1, #KVM_VTTBR - ldrd r2, r3, [r1] - mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR - - @ We're all done, just restore the GPRs and go to the guest - restore_guest_regs - clrex @ Clear exclusive monitor - eret - -__kvm_vcpu_return: - /* - * return convention: - * guest r0, r1, r2 saved on the stack - * r0: vcpu pointer - * r1: exception code - */ - save_guest_regs - - @ Set VMID == 0 - mov r2, #0 - mov r3, #0 - mcrr p15, 6, r2, r3, c2 @ Write VTTBR - - @ Don't trap coprocessor accesses for host kernel - set_hstr vmexit - set_hdcr vmexit - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore - -#ifdef CONFIG_VFPv3 - @ Switch VFP/NEON hardware state to the host's - add r7, vcpu, #VCPU_VFP_GUEST - store_vfp_state r7 - add r7, vcpu, #VCPU_VFP_HOST - ldr r7, [r7] - restore_vfp_state r7 - -after_vfp_restore: - @ Restore FPEXC_EN which we clobbered on entry - pop {r2} - VFPFMXR FPEXC, r2 -#else -after_vfp_restore: -#endif - - @ Reset Hyp-role - configure_hyp_role vmexit - - @ Let host read hardware MIDR - mrc p15, 0, r2, c0, c0, 0 - mcr p15, 4, r2, c0, c0, 0 - - @ Back to hardware MPIDR - mrc p15, 0, r2, c0, c0, 5 - mcr p15, 4, r2, c0, c0, 5 - - @ Store guest CP15 state and restore host state - read_cp15_state store_to_vcpu = 1 - write_cp15_state read_from_vcpu = 0 - - save_timer_state - save_vgic_state - - restore_host_regs - clrex @ Clear exclusive monitor -#ifndef CONFIG_CPU_ENDIAN_BE8 - mov r0, r1 @ Return the return code - mov r1, #0 @ Clear upper bits in return value -#else - @ r1 already has return code - mov r0, #0 @ Clear upper bits in return value -#endif /* CONFIG_CPU_ENDIAN_BE8 */ - bx lr @ return to IOCTL - /******************************************************************** * Call function in Hyp mode * * - * u64 kvm_call_hyp(void *hypfn, ...); + * unsigned long kvm_call_hyp(void *hypfn, ...); * * This is not really a variadic function in the classic C-way and care must * be taken when calling this to ensure parameters are passed in registers @@ -232,7 +35,7 @@ after_vfp_restore: * passed as r0, r1, and r2 (a maximum of 3 arguments in addition to the * function pointer can be passed). The function being called must be mapped * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are - * passed in r0 and r1. + * passed in r0 (strictly 32bit). * * A function pointer with a value of 0xffffffff has a special meaning, * and is used to implement __hyp_get_vectors in the same way as in @@ -246,281 +49,4 @@ after_vfp_restore: ENTRY(kvm_call_hyp) hvc #0 bx lr - -/******************************************************************** - * Hypervisor exception vector and handlers - * - * - * The KVM/ARM Hypervisor ABI is defined as follows: - * - * Entry to Hyp mode from the host kernel will happen _only_ when an HVC - * instruction is issued since all traps are disabled when running the host - * kernel as per the Hyp-mode initialization at boot time. - * - * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc - * below) when the HVC instruction is called from SVC mode (i.e. a guest or the - * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC - * instructions are called from within Hyp-mode. - * - * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): - * Switching to Hyp mode is done through a simple HVC #0 instruction. The - * exception vector code will check that the HVC comes from VMID==0 and if - * so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - * - r0 contains a pointer to a HYP function - * - r1, r2, and r3 contain arguments to the above function. - * - The HYP function will be called with its arguments in r0, r1 and r2. - * On HYP function return, we return directly to SVC. - * - * Note that the above is used to execute code in Hyp-mode from a host-kernel - * point of view, and is a different concept from performing a world-switch and - * executing guest code SVC mode (with a VMID != 0). - */ - -/* Handle undef, svc, pabt, or dabt by crashing with a user notice */ -.macro bad_exception exception_code, panic_str - push {r0-r2} - mrrc p15, 6, r0, r1, c2 @ Read VTTBR - lsr r1, r1, #16 - ands r1, r1, #0xff - beq 99f - - load_vcpu @ Load VCPU pointer - .if \exception_code == ARM_EXCEPTION_DATA_ABORT - mrc p15, 4, r2, c5, c2, 0 @ HSR - mrc p15, 4, r1, c6, c0, 0 @ HDFAR - str r2, [vcpu, #VCPU_HSR] - str r1, [vcpu, #VCPU_HxFAR] - .endif - .if \exception_code == ARM_EXCEPTION_PREF_ABORT - mrc p15, 4, r2, c5, c2, 0 @ HSR - mrc p15, 4, r1, c6, c0, 2 @ HIFAR - str r2, [vcpu, #VCPU_HSR] - str r1, [vcpu, #VCPU_HxFAR] - .endif - mov r1, #\exception_code - b __kvm_vcpu_return - - @ We were in the host already. Let's craft a panic-ing return to SVC. -99: mrs r2, cpsr - bic r2, r2, #MODE_MASK - orr r2, r2, #SVC_MODE -THUMB( orr r2, r2, #PSR_T_BIT ) - msr spsr_cxsf, r2 - mrs r1, ELR_hyp - ldr r2, =panic - msr ELR_hyp, r2 - ldr r0, =\panic_str - clrex @ Clear exclusive monitor - eret -.endm - - .text - - .align 5 -__kvm_hyp_vector: - .globl __kvm_hyp_vector - - @ Hyp-mode exception vector - W(b) hyp_reset - W(b) hyp_undef - W(b) hyp_svc - W(b) hyp_pabt - W(b) hyp_dabt - W(b) hyp_hvc - W(b) hyp_irq - W(b) hyp_fiq - - .align -hyp_reset: - b hyp_reset - - .align -hyp_undef: - bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str - - .align -hyp_svc: - bad_exception ARM_EXCEPTION_HVC, svc_die_str - - .align -hyp_pabt: - bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str - - .align -hyp_dabt: - bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str - - .align -hyp_hvc: - /* - * Getting here is either becuase of a trap from a guest or from calling - * HVC from the host kernel, which means "switch to Hyp mode". - */ - push {r0, r1, r2} - - @ Check syndrome register - mrc p15, 4, r1, c5, c2, 0 @ HSR - lsr r0, r1, #HSR_EC_SHIFT - cmp r0, #HSR_EC_HVC - bne guest_trap @ Not HVC instr. - - /* - * Let's check if the HVC came from VMID 0 and allow simple - * switch to Hyp mode - */ - mrrc p15, 6, r0, r2, c2 - lsr r2, r2, #16 - and r2, r2, #0xff - cmp r2, #0 - bne guest_trap @ Guest called HVC - - /* - * Getting here means host called HVC, we shift parameters and branch - * to Hyp function. - */ - pop {r0, r1, r2} - - /* Check for __hyp_get_vectors */ - cmp r0, #-1 - mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR - beq 1f - - push {lr} - mrs lr, SPSR - push {lr} - - mov lr, r0 - mov r0, r1 - mov r1, r2 - mov r2, r3 - -THUMB( orr lr, #1) - blx lr @ Call the HYP function - - pop {lr} - msr SPSR_csxf, lr - pop {lr} -1: eret - -guest_trap: - load_vcpu @ Load VCPU pointer to r0 - str r1, [vcpu, #VCPU_HSR] - - @ Check if we need the fault information - lsr r1, r1, #HSR_EC_SHIFT -#ifdef CONFIG_VFPv3 - cmp r1, #HSR_EC_CP_0_13 - beq switch_to_guest_vfp -#endif - cmp r1, #HSR_EC_IABT - mrceq p15, 4, r2, c6, c0, 2 @ HIFAR - beq 2f - cmp r1, #HSR_EC_DABT - bne 1f - mrc p15, 4, r2, c6, c0, 0 @ HDFAR - -2: str r2, [vcpu, #VCPU_HxFAR] - - /* - * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode: - * - * Abort on the stage 2 translation for a memory access from a - * Non-secure PL1 or PL0 mode: - * - * For any Access flag fault or Translation fault, and also for any - * Permission fault on the stage 2 translation of a memory access - * made as part of a translation table walk for a stage 1 translation, - * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR - * is UNKNOWN. - */ - - /* Check for permission fault, and S1PTW */ - mrc p15, 4, r1, c5, c2, 0 @ HSR - and r0, r1, #HSR_FSC_TYPE - cmp r0, #FSC_PERM - tsteq r1, #(1 << 7) @ S1PTW - mrcne p15, 4, r2, c6, c0, 4 @ HPFAR - bne 3f - - /* Preserve PAR */ - mrrc p15, 0, r0, r1, c7 @ PAR - push {r0, r1} - - /* Resolve IPA using the xFAR */ - mcr p15, 0, r2, c7, c8, 0 @ ATS1CPR - isb - mrrc p15, 0, r0, r1, c7 @ PAR - tst r0, #1 - bne 4f @ Failed translation - ubfx r2, r0, #12, #20 - lsl r2, r2, #4 - orr r2, r2, r1, lsl #24 - - /* Restore PAR */ - pop {r0, r1} - mcrr p15, 0, r0, r1, c7 @ PAR - -3: load_vcpu @ Load VCPU pointer to r0 - str r2, [r0, #VCPU_HPFAR] - -1: mov r1, #ARM_EXCEPTION_HVC - b __kvm_vcpu_return - -4: pop {r0, r1} @ Failed translation, return to guest - mcrr p15, 0, r0, r1, c7 @ PAR - clrex - pop {r0, r1, r2} - eret - -/* - * If VFPv3 support is not available, then we will not switch the VFP - * registers; however cp10 and cp11 accesses will still trap and fallback - * to the regular coprocessor emulation code, which currently will - * inject an undefined exception to the guest. - */ -#ifdef CONFIG_VFPv3 -switch_to_guest_vfp: - push {r3-r7} - - @ NEON/VFP used. Turn on VFP access. - set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) - - @ Switch VFP/NEON hardware state to the guest's - add r7, r0, #VCPU_VFP_HOST - ldr r7, [r7] - store_vfp_state r7 - add r7, r0, #VCPU_VFP_GUEST - restore_vfp_state r7 - - pop {r3-r7} - pop {r0-r2} - clrex - eret -#endif - - .align -hyp_irq: - push {r0, r1, r2} - mov r1, #ARM_EXCEPTION_IRQ - load_vcpu @ Load VCPU pointer to r0 - b __kvm_vcpu_return - - .align -hyp_fiq: - b hyp_fiq - - .ltorg - -__kvm_hyp_code_end: - .globl __kvm_hyp_code_end - - .section ".rodata" - -und_die_str: - .ascii "unexpected undefined exception in Hyp mode at: %#08x\n" -pabt_die_str: - .ascii "unexpected prefetch abort in Hyp mode at: %#08x\n" -dabt_die_str: - .ascii "unexpected data abort in Hyp mode at: %#08x\n" -svc_die_str: - .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x\n" +ENDPROC(kvm_call_hyp) diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S deleted file mode 100644 index 51a59504bef4..000000000000 --- a/arch/arm/kvm/interrupts_head.S +++ /dev/null @@ -1,648 +0,0 @@ -#include <linux/irqchip/arm-gic.h> -#include <asm/assembler.h> - -#define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) -#define VCPU_USR_SP (VCPU_USR_REG(13)) -#define VCPU_USR_LR (VCPU_USR_REG(14)) -#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4)) - -/* - * Many of these macros need to access the VCPU structure, which is always - * held in r0. These macros should never clobber r1, as it is used to hold the - * exception code on the return path (except of course the macro that switches - * all the registers before the final jump to the VM). - */ -vcpu .req r0 @ vcpu pointer always in r0 - -/* Clobbers {r2-r6} */ -.macro store_vfp_state vfp_base - @ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions - VFPFMRX r2, FPEXC - @ Make sure VFP is enabled so we can touch the registers. - orr r6, r2, #FPEXC_EN - VFPFMXR FPEXC, r6 - - VFPFMRX r3, FPSCR - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so - @ we only need to save them if FPEXC_EX is set. - VFPFMRX r4, FPINST - tst r2, #FPEXC_FP2V - VFPFMRX r5, FPINST2, ne @ vmrsne - bic r6, r2, #FPEXC_EX @ FPEXC_EX disable - VFPFMXR FPEXC, r6 -1: - VFPFSTMIA \vfp_base, r6 @ Save VFP registers - stm \vfp_base, {r2-r5} @ Save FPEXC, FPSCR, FPINST, FPINST2 -.endm - -/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */ -.macro restore_vfp_state vfp_base - VFPFLDMIA \vfp_base, r6 @ Load VFP registers - ldm \vfp_base, {r2-r5} @ Load FPEXC, FPSCR, FPINST, FPINST2 - - VFPFMXR FPSCR, r3 - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - VFPFMXR FPINST, r4 - tst r2, #FPEXC_FP2V - VFPFMXR FPINST2, r5, ne -1: - VFPFMXR FPEXC, r2 @ FPEXC (last, in case !EN) -.endm - -/* These are simply for the macros to work - value don't have meaning */ -.equ usr, 0 -.equ svc, 1 -.equ abt, 2 -.equ und, 3 -.equ irq, 4 -.equ fiq, 5 - -.macro push_host_regs_mode mode - mrs r2, SP_\mode - mrs r3, LR_\mode - mrs r4, SPSR_\mode - push {r2, r3, r4} -.endm - -/* - * Store all host persistent registers on the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro save_host_regs - /* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */ - mrs r2, ELR_hyp - push {r2} - - /* usr regs */ - push {r4-r12} @ r0-r3 are always clobbered - mrs r2, SP_usr - mov r3, lr - push {r2, r3} - - push_host_regs_mode svc - push_host_regs_mode abt - push_host_regs_mode und - push_host_regs_mode irq - - /* fiq regs */ - mrs r2, r8_fiq - mrs r3, r9_fiq - mrs r4, r10_fiq - mrs r5, r11_fiq - mrs r6, r12_fiq - mrs r7, SP_fiq - mrs r8, LR_fiq - mrs r9, SPSR_fiq - push {r2-r9} -.endm - -.macro pop_host_regs_mode mode - pop {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all host registers from the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro restore_host_regs - pop {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - pop_host_regs_mode irq - pop_host_regs_mode und - pop_host_regs_mode abt - pop_host_regs_mode svc - - pop {r2, r3} - msr SP_usr, r2 - mov lr, r3 - pop {r4-r12} - - pop {r2} - msr ELR_hyp, r2 -.endm - -/* - * Restore SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r1, r2, r3, r4. - */ -.macro restore_guest_regs_mode mode, offset - add r1, vcpu, \offset - ldm r1, {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all guest registers from the vcpu struct. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers *all* registers. - */ -.macro restore_guest_regs - restore_guest_regs_mode svc, #VCPU_SVC_REGS - restore_guest_regs_mode abt, #VCPU_ABT_REGS - restore_guest_regs_mode und, #VCPU_UND_REGS - restore_guest_regs_mode irq, #VCPU_IRQ_REGS - - add r1, vcpu, #VCPU_FIQ_REGS - ldm r1, {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - @ Load return state - ldr r2, [vcpu, #VCPU_PC] - ldr r3, [vcpu, #VCPU_CPSR] - msr ELR_hyp, r2 - msr SPSR_cxsf, r3 - - @ Load user registers - ldr r2, [vcpu, #VCPU_USR_SP] - ldr r3, [vcpu, #VCPU_USR_LR] - msr SP_usr, r2 - mov lr, r3 - add vcpu, vcpu, #(VCPU_USR_REGS) - ldm vcpu, {r0-r12} -.endm - -/* - * Save SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs_mode mode, offset - add r2, vcpu, \offset - mrs r3, SP_\mode - mrs r4, LR_\mode - mrs r5, SPSR_\mode - stm r2, {r3, r4, r5} -.endm - -/* - * Save all guest registers to the vcpu struct - * Expects guest's r0, r1, r2 on the stack. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs - @ Store usr registers - add r2, vcpu, #VCPU_USR_REG(3) - stm r2, {r3-r12} - add r2, vcpu, #VCPU_USR_REG(0) - pop {r3, r4, r5} @ r0, r1, r2 - stm r2, {r3, r4, r5} - mrs r2, SP_usr - mov r3, lr - str r2, [vcpu, #VCPU_USR_SP] - str r3, [vcpu, #VCPU_USR_LR] - - @ Store return state - mrs r2, ELR_hyp - mrs r3, spsr - str r2, [vcpu, #VCPU_PC] - str r3, [vcpu, #VCPU_CPSR] - - @ Store other guest registers - save_guest_regs_mode svc, #VCPU_SVC_REGS - save_guest_regs_mode abt, #VCPU_ABT_REGS - save_guest_regs_mode und, #VCPU_UND_REGS - save_guest_regs_mode irq, #VCPU_IRQ_REGS -.endm - -/* Reads cp15 registers from hardware and stores them in memory - * @store_to_vcpu: If 0, registers are written in-order to the stack, - * otherwise to the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2 - r12 - */ -.macro read_cp15_state store_to_vcpu - mrc p15, 0, r2, c1, c0, 0 @ SCTLR - mrc p15, 0, r3, c1, c0, 2 @ CPACR - mrc p15, 0, r4, c2, c0, 2 @ TTBCR - mrc p15, 0, r5, c3, c0, 0 @ DACR - mrrc p15, 0, r6, r7, c2 @ TTBR 0 - mrrc p15, 1, r8, r9, c2 @ TTBR 1 - mrc p15, 0, r10, c10, c2, 0 @ PRRR - mrc p15, 0, r11, c10, c2, 1 @ NMRR - mrc p15, 2, r12, c0, c0, 0 @ CSSELR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - str r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - str r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - str r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r2, vcpu, #CP15_OFFSET(c2_TTBR0) - strd r6, r7, [r2] - add r2, vcpu, #CP15_OFFSET(c2_TTBR1) - strd r8, r9, [r2] - str r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - str r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - str r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mrc p15, 0, r2, c13, c0, 1 @ CID - mrc p15, 0, r3, c13, c0, 2 @ TID_URW - mrc p15, 0, r4, c13, c0, 3 @ TID_URO - mrc p15, 0, r5, c13, c0, 4 @ TID_PRIV - mrc p15, 0, r6, c5, c0, 0 @ DFSR - mrc p15, 0, r7, c5, c0, 1 @ IFSR - mrc p15, 0, r8, c5, c1, 0 @ ADFSR - mrc p15, 0, r9, c5, c1, 1 @ AIFSR - mrc p15, 0, r10, c6, c0, 0 @ DFAR - mrc p15, 0, r11, c6, c0, 2 @ IFAR - mrc p15, 0, r12, c12, c0, 0 @ VBAR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c13_CID)] - str r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - str r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - str r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - str r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - str r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - str r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - str r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - str r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - str r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - str r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mrc p15, 0, r2, c14, c1, 0 @ CNTKCTL - mrrc p15, 0, r4, r5, c7 @ PAR - mrc p15, 0, r6, c10, c3, 0 @ AMAIR0 - mrc p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \store_to_vcpu == 0 - push {r2,r4-r7} - .else - str r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - strd r4, r5, [r12] - str r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - str r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif -.endm - -/* - * Reads cp15 registers from memory and writes them to hardware - * @read_from_vcpu: If 0, registers are read in-order from the stack, - * otherwise from the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - */ -.macro write_cp15_state read_from_vcpu - .if \read_from_vcpu == 0 - pop {r2,r4-r7} - .else - ldr r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - ldrd r4, r5, [r12] - ldr r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - ldr r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif - - mcr p15, 0, r2, c14, c1, 0 @ CNTKCTL - mcrr p15, 0, r4, r5, c7 @ PAR - mcr p15, 0, r6, c10, c3, 0 @ AMAIR0 - mcr p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c13_CID)] - ldr r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - ldr r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - ldr r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - ldr r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - ldr r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - ldr r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - ldr r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - ldr r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - ldr r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - ldr r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mcr p15, 0, r2, c13, c0, 1 @ CID - mcr p15, 0, r3, c13, c0, 2 @ TID_URW - mcr p15, 0, r4, c13, c0, 3 @ TID_URO - mcr p15, 0, r5, c13, c0, 4 @ TID_PRIV - mcr p15, 0, r6, c5, c0, 0 @ DFSR - mcr p15, 0, r7, c5, c0, 1 @ IFSR - mcr p15, 0, r8, c5, c1, 0 @ ADFSR - mcr p15, 0, r9, c5, c1, 1 @ AIFSR - mcr p15, 0, r10, c6, c0, 0 @ DFAR - mcr p15, 0, r11, c6, c0, 2 @ IFAR - mcr p15, 0, r12, c12, c0, 0 @ VBAR - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - ldr r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - ldr r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - ldr r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r12, vcpu, #CP15_OFFSET(c2_TTBR0) - ldrd r6, r7, [r12] - add r12, vcpu, #CP15_OFFSET(c2_TTBR1) - ldrd r8, r9, [r12] - ldr r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - ldr r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - ldr r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mcr p15, 0, r2, c1, c0, 0 @ SCTLR - mcr p15, 0, r3, c1, c0, 2 @ CPACR - mcr p15, 0, r4, c2, c0, 2 @ TTBCR - mcr p15, 0, r5, c3, c0, 0 @ DACR - mcrr p15, 0, r6, r7, c2 @ TTBR 0 - mcrr p15, 1, r8, r9, c2 @ TTBR 1 - mcr p15, 0, r10, c10, c2, 0 @ PRRR - mcr p15, 0, r11, c10, c2, 1 @ NMRR - mcr p15, 2, r12, c0, c0, 0 @ CSSELR -.endm - -/* - * Save the VGIC CPU state into memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro save_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* Save all interesting registers */ - ldr r4, [r2, #GICH_VMCR] - ldr r5, [r2, #GICH_MISR] - ldr r6, [r2, #GICH_EISR0] - ldr r7, [r2, #GICH_EISR1] - ldr r8, [r2, #GICH_ELRSR0] - ldr r9, [r2, #GICH_ELRSR1] - ldr r10, [r2, #GICH_APR] -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r5, r5 ) -ARM_BE8(rev r6, r6 ) -ARM_BE8(rev r7, r7 ) -ARM_BE8(rev r8, r8 ) -ARM_BE8(rev r9, r9 ) -ARM_BE8(rev r10, r10 ) - - str r4, [r11, #VGIC_V2_CPU_VMCR] - str r5, [r11, #VGIC_V2_CPU_MISR] -#ifdef CONFIG_CPU_ENDIAN_BE8 - str r6, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r7, [r11, #VGIC_V2_CPU_EISR] - str r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)] - str r9, [r11, #VGIC_V2_CPU_ELRSR] -#else - str r6, [r11, #VGIC_V2_CPU_EISR] - str r7, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r8, [r11, #VGIC_V2_CPU_ELRSR] - str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)] -#endif - str r10, [r11, #VGIC_V2_CPU_APR] - - /* Clear GICH_HCR */ - mov r5, #0 - str r5, [r2, #GICH_HCR] - - /* Save list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r2], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r3], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -/* - * Restore the VGIC CPU state from memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro restore_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* We only restore a minimal set of registers */ - ldr r3, [r11, #VGIC_V2_CPU_HCR] - ldr r4, [r11, #VGIC_V2_CPU_VMCR] - ldr r8, [r11, #VGIC_V2_CPU_APR] -ARM_BE8(rev r3, r3 ) -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r8, r8 ) - - str r3, [r2, #GICH_HCR] - str r4, [r2, #GICH_VMCR] - str r8, [r2, #GICH_APR] - - /* Restore list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r3], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r2], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -#define CNTHCTL_PL1PCTEN (1 << 0) -#define CNTHCTL_PL1PCEN (1 << 1) - -/* - * Save the timer state onto the VCPU and allow physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro save_timer_state - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - mrc p15, 0, r2, c14, c3, 1 @ CNTV_CTL - str r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - - isb - - mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - strd r2, r3, [r5] - - @ Ensure host CNTVCT == CNTPCT - mov r2, #0 - mcrr p15, 4, r2, r2, c14 @ CNTVOFF - -1: - mov r2, #0 @ Clear ENABLE - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL - - @ Allow physical timer/counter access for the host - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN) - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL -.endm - -/* - * Load the timer state from the VCPU and deny physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro restore_timer_state - @ Disallow physical timer access for the guest - @ Physical counter access is allowed - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #CNTHCTL_PL1PCTEN - bic r2, r2, #CNTHCTL_PL1PCEN - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL - - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - ldr r2, [r4, #KVM_TIMER_CNTVOFF] - ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] - mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF - - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - ldrd r2, r3, [r5] - mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - isb - - ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - and r2, r2, #3 - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL -1: -.endm - -.equ vmentry, 0 -.equ vmexit, 1 - -/* Configures the HSTR (Hyp System Trap Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hstr operation - mrc p15, 4, r2, c1, c1, 3 - ldr r3, =HSTR_T(15) - .if \operation == vmentry - orr r2, r2, r3 @ Trap CR{15} - .else - bic r2, r2, r3 @ Don't trap any CRx accesses - .endif - mcr p15, 4, r2, c1, c1, 3 -.endm - -/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return - * (hardware reset value is 0). Keep previous value in r2. - * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if - * VFP wasn't already enabled (always executed on vmtrap). - * If a label is specified with vmexit, it is branched to if VFP wasn't - * enabled. - */ -.macro set_hcptr operation, mask, label = none - mrc p15, 4, r2, c1, c1, 2 - ldr r3, =\mask - .if \operation == vmentry - orr r3, r2, r3 @ Trap coproc-accesses defined in mask - .else - bic r3, r2, r3 @ Don't trap defined coproc-accesses - .endif - mcr p15, 4, r3, c1, c1, 2 - .if \operation != vmentry - .if \operation == vmexit - tst r2, #(HCPTR_TCP(10) | HCPTR_TCP(11)) - beq 1f - .endif - isb - .if \label != none - b \label - .endif -1: - .endif -.endm - -/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hdcr operation - mrc p15, 4, r2, c1, c1, 1 - ldr r3, =(HDCR_TPM|HDCR_TPMCR) - .if \operation == vmentry - orr r2, r2, r3 @ Trap some perfmon accesses - .else - bic r2, r2, r3 @ Don't trap any perfmon accesses - .endif - mcr p15, 4, r2, c1, c1, 1 -.endm - -/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */ -.macro configure_hyp_role operation - .if \operation == vmentry - ldr r2, [vcpu, #VCPU_HCR] - ldr r3, [vcpu, #VCPU_IRQ_LINES] - orr r2, r2, r3 - .else - mov r2, #0 - .endif - mcr p15, 4, r2, c1, c1, 0 @ HCR -.endm - -.macro load_vcpu - mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR -.endm diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index 7f33b2056ae6..0f6600f05137 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -206,7 +206,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, run->mmio.is_write = is_write; run->mmio.phys_addr = fault_ipa; run->mmio.len = len; - memcpy(run->mmio.data, data_buf, len); + if (is_write) + memcpy(run->mmio.data, data_buf, len); if (!ret) { /* We handled the access successfully in the kernel. */ diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index aba61fd3697a..58dbd5c439df 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -28,6 +28,7 @@ #include <asm/kvm_mmio.h> #include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> +#include <asm/virt.h> #include "trace.h" @@ -598,6 +599,9 @@ int create_hyp_mappings(void *from, void *to) unsigned long start = KERN_TO_HYP((unsigned long)from); unsigned long end = KERN_TO_HYP((unsigned long)to); + if (is_kernel_in_hyp_mode()) + return 0; + start = start & PAGE_MASK; end = PAGE_ALIGN(end); @@ -630,6 +634,9 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) unsigned long start = KERN_TO_HYP((unsigned long)from); unsigned long end = KERN_TO_HYP((unsigned long)to); + if (is_kernel_in_hyp_mode()) + return 0; + /* Check for a valid kernel IO mapping */ if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1)) return -EINVAL; @@ -1431,6 +1438,22 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) } /* + * Check for a cache maintenance operation. Since we + * ended-up here, we know it is outside of any memory + * slot. But we can't find out if that is for a device, + * or if the guest is just being stupid. The only thing + * we know for sure is that this range cannot be cached. + * + * So let's assume that the guest is just being + * cautious, and skip the instruction. + */ + if (kvm_vcpu_dabt_is_cm(vcpu)) { + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); + ret = 1; + goto out_unlock; + } + + /* * The IPA is reported as [MAX:12], so we need to * complement it with the bottom 12 bits from the * faulting VA. This is always 12 bits, irrespective diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c index a9b3b905e661..c2b131527a64 100644 --- a/arch/arm/kvm/psci.c +++ b/arch/arm/kvm/psci.c @@ -70,7 +70,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) { struct kvm *kvm = source_vcpu->kvm; struct kvm_vcpu *vcpu = NULL; - wait_queue_head_t *wq; + struct swait_queue_head *wq; unsigned long cpu_id; unsigned long context_id; phys_addr_t target_pc; @@ -119,7 +119,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) smp_mb(); /* Make sure the above is visible */ wq = kvm_arch_vcpu_wq(vcpu); - wake_up_interruptible(wq); + swake_up(wq); return PSCI_RET_SUCCESS; } diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index eeb85858d6bb..0048b5a62a50 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -71,7 +71,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) } /* Reset core registers */ - memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs)); + memcpy(&vcpu->arch.ctxt.gp_regs, reset_regs, sizeof(vcpu->arch.ctxt.gp_regs)); /* Reset CP15 registers */ kvm_reset_coprocs(vcpu); diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot deleted file mode 100644 index d079de0b6e3b..000000000000 --- a/arch/arm/mach-cns3xxx/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00C00000 diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h index a0f5b60662ae..a642ba5feb64 100644 --- a/arch/arm/mach-cns3xxx/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/cns3xxx.h @@ -162,13 +162,11 @@ #define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ #define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */ -#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000 #define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */ #define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000 #define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */ -#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000 #define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */ #define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000 @@ -177,16 +175,13 @@ #define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000 #define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */ -#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000 #define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */ -#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000 #define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */ #define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000 #define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */ -#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000 #define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */ #define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000 @@ -195,7 +190,6 @@ #define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000 #define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */ -#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000 /* * Testchip peripheral and fpga gic regions diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 47905a50e075..318394ed5c7a 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -220,13 +220,13 @@ static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci, u32 mask = (0x1ull << (size * 8)) - 1; int shift = (where % 4) * 8; - v = readl_relaxed(base + (where & 0xffc)); + v = readl_relaxed(base); v &= ~(mask << shift); v |= (val & mask) << shift; - writel_relaxed(v, base + (where & 0xffc)); - readl_relaxed(base + (where & 0xffc)); + writel_relaxed(v, base); + readl_relaxed(base); } static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index bcaf1d025505..36c8f5324e43 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -9,7 +9,6 @@ config CP_INTC config ARCH_DAVINCI_DMx bool - select CPU_ARM926T menu "TI DaVinci Implementations" @@ -32,7 +31,7 @@ config ARCH_DAVINCI_DM646x config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" - depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR + depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE @@ -40,13 +39,12 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" - depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR + depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) select ARCH_DAVINCI_DA8XX select CP_INTC config ARCH_DAVINCI_DA8XX bool - select CPU_ARM926T config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" @@ -58,7 +56,7 @@ comment "DaVinci Board Type" config MACH_DA8XX_DT bool "Support DA8XX platforms using device tree" default y - depends on ARCH_DAVINCI_DA8XX + depends on ARCH_DAVINCI_DA850 select PINCTRL help Say y here to include support for TI DaVinci DA850 based using @@ -68,8 +66,6 @@ config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x depends on ARCH_DAVINCI_DM644x - select EEPROM_AT24 - select I2C help Configure this option to specify the whether the board used for development is a DM644x EVM @@ -77,8 +73,6 @@ config MACH_DAVINCI_EVM config MACH_SFFSDR bool "Lyrtech SFFSDR" depends on ARCH_DAVINCI_DM644x - select EEPROM_AT24 - select I2C help Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. @@ -109,8 +103,6 @@ config MACH_DAVINCI_DM6467_EVM bool "TI DM6467 EVM" default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x - select EEPROM_AT24 - select I2C select MACH_DAVINCI_DM6467TEVM help Configure this option to specify the whether the board used @@ -123,8 +115,6 @@ config MACH_DAVINCI_DM365_EVM bool "TI DM365 EVM" default ARCH_DAVINCI_DM365 depends on ARCH_DAVINCI_DM365 - select EEPROM_AT24 - select I2C help Configure this option to specify whether the board used for development is a DM365 EVM @@ -133,9 +123,7 @@ config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 - select EEPROM_AT24 - select GPIO_PCF857X - select I2C + select GPIO_PCF857X if I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. @@ -204,8 +192,6 @@ endchoice config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 - select EEPROM_AT24 - select I2C help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 7a20507a3eef..68cc09907828 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -267,7 +267,7 @@ static struct platform_device rtc_dev = { static struct snd_platform_data dm644x_evm_snd_data; /*----------------------------------------------------------------------*/ - +#ifdef CONFIG_I2C /* * I2C GPIO expanders */ @@ -612,6 +612,7 @@ static void __init evm_init_i2c(void) i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } +#endif #define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) @@ -780,7 +781,9 @@ static __init void davinci_evm_init(void) pr_warn("%s: Cannot configure AEMIF\n", __func__); +#ifdef CONFIG_I2C evm_leds[7].default_trigger = "nand-disk"; +#endif if (HAS_NOR) pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n"); } else if (HAS_NOR) @@ -789,9 +792,10 @@ static __init void davinci_evm_init(void) platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); +#ifdef CONFIG_I2C evm_init_i2c(); - davinci_setup_mmc(0, &dm6446evm_mmc_config); +#endif dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg); davinci_serial_init(dm644x_serial_device); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index ee6ab7e8d3b0..f702d4fc8eb8 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -121,6 +121,7 @@ static struct platform_device davinci_nand_device = { #define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) +#ifdef CONFIG_I2C /* CPLD Register 0 bits to control ATA */ #define DM646X_EVM_ATA_RST BIT(0) #define DM646X_EVM_ATA_PWD BIT(1) @@ -316,6 +317,7 @@ static struct at24_platform_data eeprom_info = { .setup = davinci_get_mac_addr, .context = (void *)0x7f00, }; +#endif static u8 dm646x_iis_serializer_direction[] = { TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE, @@ -346,6 +348,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { }, }; +#ifdef CONFIG_I2C static struct i2c_client *cpld_client; static int cpld_video_probe(struct i2c_client *client, @@ -710,6 +713,7 @@ static void __init evm_init_i2c(void) evm_init_cpld(); evm_init_video(); } +#endif #define DM6467T_EVM_REF_FREQ 33000000 @@ -764,7 +768,10 @@ static __init void evm_init(void) if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); +#ifdef CONFIG_I2C evm_init_i2c(); +#endif + davinci_serial_init(dm646x_serial_device); dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index de1316bf643a..d97c588550ad 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -51,6 +51,7 @@ struct factory_config { static struct factory_config factory_config; +#ifdef CONFIG_CPU_FREQ struct part_no_info { const char *part_no; /* part number string of interest */ int max_freq; /* khz */ @@ -87,7 +88,6 @@ static struct part_no_info mityomapl138_pn_info[] = { }, }; -#ifdef CONFIG_CPU_FREQ static void mityomapl138_cpufreq_init(const char *partnum) { int i, ret; @@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum) static void mityomapl138_cpufreq_init(const char *partnum) { } #endif -static void read_factory_config(struct memory_accessor *a, void *context) +static void read_factory_config(struct nvmem_device *nvmem, void *context) { int ret; const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; - ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); + ret = nvmem_device_read(nvmem, 0, sizeof(factory_config), + &factory_config); if (ret != sizeof(struct factory_config)) { pr_warn("Read Factory Config Failed: %d\n", ret); goto bad_config; diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index a794f6d9d444..f55ef2ef2f92 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info); void __iomem *davinci_intc_base; int davinci_intc_type; -void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) +void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context) { char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; off_t offset = (off_t)context; /* Read MAC addr from EEPROM */ - if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); } diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 8fb97b93b6bb..53b456a5bbe0 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -30,7 +30,7 @@ u32 *uart; /* PORT_16C550A, in polled non-fifo mode */ -static void putc(char c) +static inline void putc(char c) { if (!uart) return; diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index d8c439c89ea9..0bd6d894c597 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -8,7 +8,7 @@ config DOVE_LEGACY config MACH_DOVE_DB bool "Marvell DB-MV88AP510 Development Board" select DOVE_LEGACY - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell DB-MV88AP510 Development Board. diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index c4989c2bcad8..207fa2c737a6 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -29,6 +29,7 @@ menuconfig ARCH_EXYNOS select SOC_SAMSUNG select SRAM select THERMAL + select THERMAL_OF select MFD_SYSCON select CLKSRC_EXYNOS_MCT select POWER_RESET diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot deleted file mode 100644 index b9862e22bf10..000000000000 --- a/arch/arm/mach-exynos/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x40008000 -params_phys-y := 0x40000100 diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index 07152d00fc50..cbbdd84cf49a 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -68,7 +68,6 @@ config ARCH_NETWINDER select ISA select ISA_DMA select PCI - select VIRT_TO_BUS help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index 2478d9f4d92d..469a76ea0459 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -17,7 +17,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -227,5 +227,5 @@ void __init gemini_gpio_init(void) (void *)i); } - BUG_ON(gpiochip_add(&gemini_gpio_chip)); + BUG_ON(gpiochip_add_data(&gemini_gpio_chip, NULL)); } diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index cfc696b972f3..fd8720532471 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -374,8 +374,13 @@ static struct pu_domain imx6q_pu_domain = { .name = "PU", .power_off = imx6q_pm_pu_power_off, .power_on = imx6q_pm_pu_power_on, - .power_off_latency_ns = 25000, - .power_on_latency_ns = 2000000, + .states = { + [0] = { + .power_off_latency_ns = 25000, + .power_on_latency_ns = 2000000, + }, + }, + .state_count = 1, }, }; diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 267fad23b225..a4c389eae31a 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -13,6 +13,8 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ +#include <linux/gpio/driver.h> +/* Needed for gpio_to_irq() */ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> @@ -243,7 +245,7 @@ static void __init mx27ads_regulator_init(void) vchip->ngpio = 1; vchip->direction_output = vgpio_dir_out; vchip->set = vgpio_set; - gpiochip_add(vchip); + gpiochip_add_data(vchip, NULL); platform_device_register_data(NULL, "reg-fixed-voltage", PLATFORM_DEVID_AUTO, diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index b01bdc9baf89..b2a85ba13f08 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -2,22 +2,16 @@ menuconfig ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA - select ARM_PATCH_PHYS_VIRT if MMU - select AUTO_ZRELADDR - select COMMON_CLK select COMMON_CLK_VERSATILE - select GENERIC_CLOCKEVENTS select HAVE_TCM select ICST select MFD_SYSCON - select MULTI_IRQ_HANDLER select PLAT_VERSATILE select POWER_RESET select POWER_RESET_VERSATILE select POWER_SUPPLY select SOC_INTEGRATOR_CM select SPARSE_IRQ - select USE_OF select VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. diff --git a/arch/arm/mach-integrator/Makefile.boot b/arch/arm/mach-integrator/Makefile.boot deleted file mode 100644 index ff0a4b5b0a82..000000000000 --- a/arch/arm/mach-integrator/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 1cb6f2f02880..26874f608ca9 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -27,7 +27,7 @@ #include <linux/clockchips.h> #include <linux/io.h> #include <linux/export.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <linux/cpu.h> #include <linux/pci.h> #include <linux/sched_clock.h> @@ -461,7 +461,7 @@ void __init ixp4xx_sys_init(void) platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); - gpiochip_add(&ixp4xx_gpio_chip); + gpiochip_add_data(&ixp4xx_gpio_chip, NULL); if (cpu_is_ixp46x()) { int region; diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index c5bae9c035d5..b7ddd27419c2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -395,204 +395,6 @@ #define CRP_AD_CBE_BESL 20 #define CRP_AD_CBE_WRITE 0x00010000 - -/* - * USB Device Controller - * - * These are used by the USB gadget driver, so they don't follow the - * IXP4XX_ naming convetions. - * - */ -# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x))) - -/* UDC Undocumented - Reserved1 */ -#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004) -/* UDC Undocumented - Reserved2 */ -#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008) -/* UDC Undocumented - Reserved3 */ -#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C) -/* UDC Control Register */ -#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000) -/* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010) -/* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014) -/* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018) -/* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C) -/* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020) -/* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024) -/* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028) -/* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C) -/* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030) -/* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034) -/* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038) -/* UDC Endpoint 11 (IN) Control/Status Register */ -#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C) -/* UDC Endpoint 12 (OUT) Control/Status Register */ -#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040) -/* UDC Endpoint 13 (IN) Control/Status Register */ -#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044) -/* UDC Endpoint 14 (OUT) Control/Status Register */ -#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048) -/* UDC Endpoint 15 (Interrupt) Control/Status Register */ -#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C) -/* UDC Frame Number Register High */ -#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060) -/* UDC Frame Number Register Low */ -#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064) -/* UDC Byte Count Reg 2 */ -#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068) -/* UDC Byte Count Reg 4 */ -#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c) -/* UDC Byte Count Reg 7 */ -#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070) -/* UDC Byte Count Reg 9 */ -#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074) -/* UDC Byte Count Reg 12 */ -#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078) -/* UDC Byte Count Reg 14 */ -#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c) -/* UDC Endpoint 0 Data Register */ -#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080) -/* UDC Endpoint 1 Data Register */ -#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100) -/* UDC Endpoint 2 Data Register */ -#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180) -/* UDC Endpoint 3 Data Register */ -#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200) -/* UDC Endpoint 4 Data Register */ -#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400) -/* UDC Endpoint 5 Data Register */ -#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0) -/* UDC Endpoint 6 Data Register */ -#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600) -/* UDC Endpoint 7 Data Register */ -#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680) -/* UDC Endpoint 8 Data Register */ -#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700) -/* UDC Endpoint 9 Data Register */ -#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900) -/* UDC Endpoint 10 Data Register */ -#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0) -/* UDC Endpoint 11 Data Register */ -#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00) -/* UDC Endpoint 12 Data Register */ -#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80) -/* UDC Endpoint 13 Data Register */ -#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00) -/* UDC Endpoint 14 Data Register */ -#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00) -/* UDC Endpoint 15 Data Register */ -#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0) -/* UDC Interrupt Control Register 0 */ -#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050) -/* UDC Interrupt Control Register 1 */ -#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054) -/* UDC Status Interrupt Register 0 */ -#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058) -/* UDC Status Interrupt Register 1 */ -#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C) - -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ /* "fuse" bits of IXP_EXP_CFG2 */ diff --git a/arch/arm/mach-keystone/Makefile.boot b/arch/arm/mach-keystone/Makefile.boot deleted file mode 100644 index f3835c43af61..000000000000 --- a/arch/arm/mach-keystone/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ -zreladdr-y := 0x80008000 diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index c279293f084c..d80879ce4963 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -63,7 +63,7 @@ static void __init keystone_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static phys_addr_t keystone_virt_to_idmap(unsigned long x) +static unsigned long keystone_virt_to_idmap(unsigned long x) { return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START; } diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c index 1f4f2f4f25bb..478ebd1f2b0f 100644 --- a/arch/arm/mach-ks8695/board-og.c +++ b/arch/arm/mach-ks8695/board-og.c @@ -80,7 +80,7 @@ static void __init og_pci_bus_reset(void) #define S8250_VIRT 0xf4000000 #define S8250_SIZE 0x00100000 -static struct __initdata map_desc og_io_desc[] = { +static struct map_desc og_io_desc[] __initdata = { { .virtual = S8250_VIRT, .pfn = __phys_to_pfn(S8250_PHYS), diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c index 474a050da85b..7a1c4caa1ab5 100644 --- a/arch/arm/mach-ks8695/cpu.c +++ b/arch/arm/mach-ks8695/cpu.c @@ -34,7 +34,7 @@ #include <mach/regs-misc.h> -static struct __initdata map_desc ks8695_io_desc[] = { +static struct map_desc ks8695_io_desc[] __initdata = { { .virtual = (unsigned long)KS8695_IO_VA, .pfn = __phys_to_pfn(KS8695_IO_PA), diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h index c089a1aea674..a001c7c34df2 100644 --- a/arch/arm/mach-ks8695/include/mach/uncompress.h +++ b/arch/arm/mach-ks8695/include/mach/uncompress.h @@ -17,7 +17,7 @@ #include <linux/io.h> #include <mach/regs-uart.h> -static void putc(char c) +static inline void putc(char c) { while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE)) barrier(); diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index f5db805ab958..c70709ada692 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -2,7 +2,6 @@ # Makefile for the linux kernel. # -obj-y := timer.o irq.o common.o serial.o clock.o +obj-y := irq.o common.o serial.o obj-y += pm.o suspend.o obj-y += phy3250.o - diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c deleted file mode 100644 index 661c8f4b2310..000000000000 --- a/arch/arm/mach-lpc32xx/clock.c +++ /dev/null @@ -1,1284 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/clock.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * LPC32xx clock management driver overview - * - * The LPC32XX contains a number of high level system clocks that can be - * generated from different sources. These system clocks are used to - * generate the CPU and bus rates and the individual peripheral clocks in - * the system. When Linux is started by the boot loader, the system - * clocks are already running. Stopping a system clock during normal - * Linux operation should never be attempted, as peripherals that require - * those clocks will quit working (ie, DRAM). - * - * The LPC32xx high level clock tree looks as follows. Clocks marked with - * an asterisk are always on and cannot be disabled. Clocks marked with - * an ampersand can only be disabled in CPU suspend mode. Clocks marked - * with a caret are always on if it is the selected clock for the SYSCLK - * source. The clock that isn't used for SYSCLK can be enabled and - * disabled normally. - * 32KHz oscillator* - * / | \ - * RTC* PLL397^ TOUCH - * / - * Main oscillator^ / - * | \ / - * | SYSCLK& - * | \ - * | \ - * USB_PLL HCLK_PLL& - * | | | - * USB host/device PCLK& | - * | | - * Peripherals - * - * The CPU and chip bus rates are derived from the HCLK PLL, which can - * generate various clock rates up to 266MHz and beyond. The internal bus - * rates (PCLK and HCLK) are generated from dividers based on the HCLK - * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate, - * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high - * level clocks are based on either HCLK or PCLK, but have their own - * dividers as part of the IP itself. Because of this, the system clock - * rates should not be changed. - * - * The HCLK PLL is clocked from SYSCLK, which can be derived from the - * main oscillator or PLL397. PLL397 generates a rate that is 397 times - * the 32KHz oscillator rate. The main oscillator runs at the selected - * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate - * is normally 13MHz, but depends on the selection of external crystals - * or oscillators. If USB operation is required, the main oscillator must - * be used in the system. - * - * Switching SYSCLK between sources during normal Linux operation is not - * supported. SYSCLK is preset in the bootloader. Because of the - * complexities of clock management during clock frequency changes, - * there are some limitations to the clock driver explained below: - * - The PLL397 and main oscillator can be enabled and disabled by the - * clk_enable() and clk_disable() functions unless SYSCLK is based - * on that clock. This allows the other oscillator that isn't driving - * the HCLK PLL to be used as another system clock that can be routed - * to an external pin. - * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with - * this driver. - * - HCLK and PCLK rates cannot be changed as part of this driver. - * - Most peripherals have their own dividers are part of the peripheral - * block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates - * will also impact the individual peripheral rates. - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/clkdev.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "clock.h" -#include "common.h" - -static DEFINE_SPINLOCK(global_clkregs_lock); - -static int usb_pll_enable, usb_pll_valid; - -static struct clk clk_armpll; -static struct clk clk_usbpll; - -/* - * Post divider values for PLLs based on selected register value - */ -static const u32 pll_postdivs[4] = {1, 2, 4, 8}; - -static unsigned long local_return_parent_rate(struct clk *clk) -{ - /* - * If a clock has a rate of 0, then it inherits it's parent - * clock rate - */ - while (clk->rate == 0) - clk = clk->parent; - - return clk->rate; -} - -/* 32KHz clock has a fixed rate and is not stoppable */ -static struct clk osc_32KHz = { - .rate = LPC32XX_CLOCK_OSC_FREQ, - .get_rate = local_return_parent_rate, -}; - -static int local_pll397_enable(struct clk *clk, int enable) -{ - u32 reg; - unsigned long timeout = jiffies + msecs_to_jiffies(10); - - reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL); - - if (enable == 0) { - reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; - __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); - } else { - /* Enable PLL397 */ - reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; - __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); - - /* Wait for PLL397 lock */ - while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & - LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) && - time_before(jiffies, timeout)) - cpu_relax(); - - if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & - LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) - return -ENODEV; - } - - return 0; -} - -static int local_oscmain_enable(struct clk *clk, int enable) -{ - u32 reg; - unsigned long timeout = jiffies + msecs_to_jiffies(10); - - reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL); - - if (enable == 0) { - reg |= LPC32XX_CLKPWR_MOSC_DISABLE; - __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); - } else { - /* Enable main oscillator */ - reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE; - __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); - - /* Wait for main oscillator to start */ - while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & - LPC32XX_CLKPWR_MOSC_DISABLE) != 0) && - time_before(jiffies, timeout)) - cpu_relax(); - - if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & - LPC32XX_CLKPWR_MOSC_DISABLE) != 0) - return -ENODEV; - } - - return 0; -} - -static struct clk osc_pll397 = { - .parent = &osc_32KHz, - .enable = local_pll397_enable, - .rate = LPC32XX_CLOCK_OSC_FREQ * 397, - .get_rate = local_return_parent_rate, -}; - -static struct clk osc_main = { - .enable = local_oscmain_enable, - .rate = LPC32XX_MAIN_OSC_FREQ, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_sys; - -/* - * Convert a PLL register value to a PLL output frequency - */ -u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval) -{ - struct clk_pll_setup pllcfg; - - pllcfg.cco_bypass_b15 = 0; - pllcfg.direct_output_b14 = 0; - pllcfg.fdbk_div_ctrl_b13 = 0; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0) - pllcfg.cco_bypass_b15 = 1; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0) - pllcfg.direct_output_b14 = 1; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0) - pllcfg.fdbk_div_ctrl_b13 = 1; - pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF); - pllcfg.pll_n = 1 + ((regval >> 9) & 0x3); - pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)]; - - return clk_check_pll_setup(inputclk, &pllcfg); -} - -/* - * Setup the HCLK PLL with a PLL structure - */ -static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup) -{ - u32 tv, tmp = 0; - - if (PllSetup->analog_on != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP; - if (PllSetup->cco_bypass_b15 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS; - if (PllSetup->direct_output_b14 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS; - if (PllSetup->fdbk_div_ctrl_b13 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK; - - tv = ffs(PllSetup->pll_p) - 1; - if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3)) - return 0; - - tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv); - tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1); - tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1); - - return tmp; -} - -/* - * Update the ARM core PLL frequency rate variable from the actual PLL setting - */ -static void local_update_armpll_rate(void) -{ - u32 clkin, pllreg; - - clkin = clk_armpll.parent->rate; - pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; - - clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg); -} - -/* - * Find a PLL configuration for the selected input frequency - */ -static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq, - struct clk_pll_setup *pllsetup) -{ - u32 ifreq, freqtol, m, n, p, fclkout; - - /* Determine frequency tolerance limits */ - freqtol = target_freq / 250; - ifreq = pllin_freq; - - /* Is direct bypass mode possible? */ - if (abs(pllin_freq - target_freq) <= freqtol) { - pllsetup->analog_on = 0; - pllsetup->cco_bypass_b15 = 1; - pllsetup->direct_output_b14 = 1; - pllsetup->fdbk_div_ctrl_b13 = 1; - pllsetup->pll_p = pll_postdivs[0]; - pllsetup->pll_n = 1; - pllsetup->pll_m = 1; - return clk_check_pll_setup(ifreq, pllsetup); - } else if (target_freq <= ifreq) { - pllsetup->analog_on = 0; - pllsetup->cco_bypass_b15 = 1; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 1; - pllsetup->pll_n = 1; - pllsetup->pll_m = 1; - for (p = 0; p <= 3; p++) { - pllsetup->pll_p = pll_postdivs[p]; - fclkout = clk_check_pll_setup(ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - - /* Is direct mode possible? */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 1; - pllsetup->fdbk_div_ctrl_b13 = 0; - pllsetup->pll_p = pll_postdivs[0]; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - /* Compute output frequency for this value */ - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup(ifreq, - pllsetup); - if (abs(target_freq - fclkout) <= - freqtol) - return fclkout; - } - } - - /* Is integer mode possible? */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 1; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - for (p = 0; p < 4; p++) { - /* Compute output frequency */ - pllsetup->pll_p = pll_postdivs[p]; - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup( - ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - } - - /* Try non-integer mode */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 0; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - for (p = 0; p < 4; p++) { - /* Compute output frequency */ - pllsetup->pll_p = pll_postdivs[p]; - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup( - ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - } - - return 0; -} - -static struct clk clk_armpll = { - .parent = &clk_sys, - .get_rate = local_return_parent_rate, -}; - -/* - * Setup the USB PLL with a PLL structure - */ -static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup) -{ - u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF; - reg |= tmp; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - return clk_check_pll_setup(clk_usbpll.parent->rate, - pHCLKPllSetup); -} - -static int local_usbpll_enable(struct clk *clk, int enable) -{ - u32 reg; - int ret = 0; - unsigned long timeout = jiffies + msecs_to_jiffies(20); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - - __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 | - LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), - LPC32XX_CLKPWR_USB_CTRL); - __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1, - LPC32XX_CLKPWR_USB_CTRL); - - if (enable && usb_pll_valid && usb_pll_enable) { - ret = -ENODEV; - /* - * If the PLL rate has been previously set, then the rate - * in the PLL register is valid and can be enabled here. - * Otherwise, it needs to be enabled as part of setrate. - */ - - /* - * Gate clock into PLL - */ - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - /* - * Enable PLL - */ - reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - /* - * Wait for PLL to lock - */ - while (time_before(jiffies, timeout) && (ret == -ENODEV)) { - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS) - ret = 0; - else - udelay(10); - } - - /* - * Gate clock from PLL if PLL is locked - */ - if (ret == 0) { - __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2, - LPC32XX_CLKPWR_USB_CTRL); - } else { - __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 | - LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), - LPC32XX_CLKPWR_USB_CTRL); - } - } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) { - usb_pll_valid = 0; - usb_pll_enable = 0; - } - - return ret; -} - -static unsigned long local_usbpll_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 clkin, usbdiv; - struct clk_pll_setup pllsetup; - - /* - * Unlike other clocks, this clock has a KHz input rate, so bump - * it up to work with the PLL function - */ - rate = rate * 1000; - - clkin = clk->get_rate(clk); - usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & - LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; - clkin = clkin / usbdiv; - - /* Try to find a good rate setup */ - if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) - return 0; - - return clk_check_pll_setup(clkin, &pllsetup); -} - -static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -ENODEV; - u32 clkin, usbdiv; - struct clk_pll_setup pllsetup; - - /* - * Unlike other clocks, this clock has a KHz input rate, so bump - * it up to work with the PLL function - */ - rate = rate * 1000; - - clkin = clk->get_rate(clk->parent); - usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & - LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; - clkin = clkin / usbdiv; - - /* Try to find a good rate setup */ - if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) - return -EINVAL; - - /* - * Disable PLL clocks during PLL change - */ - local_usbpll_enable(clk, 0); - pllsetup.analog_on = 0; - local_clk_usbpll_setup(&pllsetup); - - /* - * Start USB PLL and check PLL status - */ - - usb_pll_valid = 1; - usb_pll_enable = 1; - - ret = local_usbpll_enable(clk, 1); - if (ret >= 0) - clk->rate = clk_check_pll_setup(clkin, &pllsetup); - - return ret; -} - -static struct clk clk_usbpll = { - .parent = &osc_main, - .set_rate = local_usbpll_set_rate, - .enable = local_usbpll_enable, - .rate = 48000, /* In KHz */ - .get_rate = local_return_parent_rate, - .round_rate = local_usbpll_round_rate, -}; - -static u32 clk_get_hclk_div(void) -{ - static const u32 hclkdivs[4] = {1, 2, 4, 4}; - return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW( - __raw_readl(LPC32XX_CLKPWR_HCLK_DIV))]; -} - -static struct clk clk_hclk = { - .parent = &clk_armpll, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_pclk = { - .parent = &clk_armpll, - .get_rate = local_return_parent_rate, -}; - -static int local_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - tmp = __raw_readl(clk->enable_reg); - - if (enable == 0) - tmp &= ~clk->enable_mask; - else - tmp |= clk->enable_mask; - - __raw_writel(tmp, clk->enable_reg); - - return 0; -} - -/* Peripheral clock sources */ -static struct clk clk_timer0 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer1 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer2 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer3 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_mpwm = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_wdt = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMER_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_PWMCLK_WDOG_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_vfp9 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_DEBUG_CTRL, - .enable_mask = LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_dma = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_DMA_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_pwm = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_PWM_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN | - LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK | - LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) | - LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN | - LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK | - LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1), - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart3 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart4 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart5 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart6 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c2 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = io_p2v(LPC32XX_USB_BASE + 0xFF4), - .enable_mask = 0x4, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_ssp0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_ssp1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_kscan = { - .parent = &osc_32KHz, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_KEY_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_nand = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN | - LPC32XX_CLKPWR_NANDCLK_SEL_SLC, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_nand_mlc = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN | - LPC32XX_CLKPWR_NANDCLK_DMA_INT | - LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2s0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2s1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN | - LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_net = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_MACCLK_CTRL, - .enable_mask = (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN | - LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN | - LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN), - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_rtc = { - .parent = &osc_32KHz, - .rate = 1, /* 1 Hz */ - .get_rate = local_return_parent_rate, -}; - -static int local_usb_enable(struct clk *clk, int enable) -{ - u32 tmp; - - if (enable) { - /* Set up I2C pull levels */ - tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); - tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE; - __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL); - } - - return local_onoff_enable(clk, enable); -} - -static struct clk clk_usbd = { - .parent = &clk_usbpll, - .enable = local_usb_enable, - .enable_reg = LPC32XX_CLKPWR_USB_CTRL, - .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN, - .get_rate = local_return_parent_rate, -}; - -#define OTG_ALWAYS_MASK (LPC32XX_USB_OTG_OTG_CLOCK_ON | \ - LPC32XX_USB_OTG_I2C_CLOCK_ON) - -static int local_usb_otg_enable(struct clk *clk, int enable) -{ - int to = 1000; - - if (enable) { - __raw_writel(clk->enable_mask, clk->enable_reg); - - while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & - clk->enable_mask) != clk->enable_mask) && (to > 0)) - to--; - } else { - __raw_writel(OTG_ALWAYS_MASK, clk->enable_reg); - - while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & - OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0)) - to--; - } - - if (to) - return 0; - else - return -1; -} - -static struct clk clk_usb_otg_dev = { - .parent = &clk_usbpll, - .enable = local_usb_otg_enable, - .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, - .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | - LPC32XX_USB_OTG_OTG_CLOCK_ON | - LPC32XX_USB_OTG_DEV_CLOCK_ON | - LPC32XX_USB_OTG_I2C_CLOCK_ON, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_usb_otg_host = { - .parent = &clk_usbpll, - .enable = local_usb_otg_enable, - .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, - .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | - LPC32XX_USB_OTG_OTG_CLOCK_ON | - LPC32XX_USB_OTG_HOST_CLOCK_ON | - LPC32XX_USB_OTG_I2C_CLOCK_ON, - .get_rate = local_return_parent_rate, -}; - -static int tsc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - /* Make sure 32KHz clock is the selected clock */ - tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; - __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - - if (enable == 0) - __raw_writel(0, clk->enable_reg); - else - __raw_writel(clk->enable_mask, clk->enable_reg); - - return 0; -} - -static struct clk clk_tsc = { - .parent = &osc_32KHz, - .enable = tsc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static int adc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - u32 divider; - - /* Use PERIPH_CLOCK */ - tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; - /* - * Set clock divider so that we have equal to or less than - * 4.5MHz clock at ADC - */ - divider = clk->get_rate(clk) / 4500000 + 1; - tmp |= divider; - __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - - /* synchronize rate of this clock w/ actual HW setting */ - clk->rate = clk->get_rate(clk->parent) / divider; - - if (enable == 0) - __raw_writel(0, clk->enable_reg); - else - __raw_writel(clk->enable_mask, clk->enable_reg); - - return 0; -} - -static struct clk clk_adc = { - .parent = &clk_pclk, - .enable = adc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static int mmc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS); - - /* If rate is 0, disable clock */ - if (enable != 0) - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN; - - __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - - return 0; -} - -static unsigned long mmc_get_rate(struct clk *clk) -{ - u32 div, rate, oldclk; - - /* The MMC clock must be on when accessing an MMC register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN, - LPC32XX_CLKPWR_MS_CTRL); - div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL); - - /* Get the parent clock rate */ - rate = clk->parent->get_rate(clk->parent); - - /* Get the MMC controller clock divider value */ - div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - - if (!div) - div = 1; - - return rate / div; -} - -static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long div, prate; - - /* Get the parent clock rate */ - prate = clk->parent->get_rate(clk->parent); - - if (rate >= prate) - return prate; - - div = prate / rate; - if (div > 0xf) - div = 0xf; - - return prate / div; -} - -static int mmc_set_rate(struct clk *clk, unsigned long rate) -{ - u32 tmp; - unsigned long prate, div, crate = mmc_round_rate(clk, rate); - - prate = clk->parent->get_rate(clk->parent); - - div = prate / crate; - - /* The MMC clock must be on when accessing an MMC register */ - tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) | - LPC32XX_CLKPWR_MSCARD_SDCARD_EN; - __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - - return 0; -} - -static struct clk clk_mmc = { - .parent = &clk_armpll, - .set_rate = mmc_set_rate, - .get_rate = mmc_get_rate, - .round_rate = mmc_round_rate, - .enable = mmc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_MS_CTRL, - .enable_mask = LPC32XX_CLKPWR_MSCARD_SDCARD_EN, -}; - -static unsigned long clcd_get_rate(struct clk *clk) -{ - u32 tmp, div, rate, oldclk; - - /* The LCD clock must be on when accessing an LCD register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, - LPC32XX_CLKPWR_LCDCLK_CTRL); - tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); - __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); - - rate = clk->parent->get_rate(clk->parent); - - /* Only supports internal clocking */ - if (tmp & TIM2_BCD) - return rate; - - div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22); - tmp = rate / (2 + div); - - return tmp; -} - -static int clcd_set_rate(struct clk *clk, unsigned long rate) -{ - u32 tmp, prate, div, oldclk; - - /* The LCD clock must be on when accessing an LCD register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, - LPC32XX_CLKPWR_LCDCLK_CTRL); - - tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD; - prate = clk->parent->get_rate(clk->parent); - - if (rate < prate) { - /* Find closest divider */ - div = prate / rate; - if (div >= 2) { - div -= 2; - tmp &= ~TIM2_BCD; - } - - tmp &= ~(0xF800001F); - tmp |= (div & 0x1F); - tmp |= (((div >> 5) & 0x1F) << 27); - } - - __raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); - __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); - - return 0; -} - -static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate) -{ - u32 prate, div; - - prate = clk->parent->get_rate(clk->parent); - - if (rate >= prate) - rate = prate; - else { - div = prate / rate; - if (div > 0x3ff) - div = 0x3ff; - - rate = prate / div; - } - - return rate; -} - -static struct clk clk_lcd = { - .parent = &clk_hclk, - .set_rate = clcd_set_rate, - .get_rate = clcd_get_rate, - .round_rate = clcd_round_rate, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_LCDCLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN, -}; - -static void local_clk_disable(struct clk *clk) -{ - /* Don't attempt to disable clock if it has no users */ - if (clk->usecount > 0) { - clk->usecount--; - - /* Only disable clock when it has no more users */ - if ((clk->usecount == 0) && (clk->enable)) - clk->enable(clk, 0); - - /* Check parent clocks, they may need to be disabled too */ - if (clk->parent) - local_clk_disable(clk->parent); - } -} - -static int local_clk_enable(struct clk *clk) -{ - int ret = 0; - - /* Enable parent clocks first and update use counts */ - if (clk->parent) - ret = local_clk_enable(clk->parent); - - if (!ret) { - /* Only enable clock if it's currently disabled */ - if ((clk->usecount == 0) && (clk->enable)) - ret = clk->enable(clk, 1); - - if (!ret) - clk->usecount++; - else if (clk->parent) - local_clk_disable(clk->parent); - } - - return ret; -} - -/* - * clk_enable - inform the system when the clock source should be running. - */ -int clk_enable(struct clk *clk) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&global_clkregs_lock, flags); - ret = local_clk_enable(clk); - spin_unlock_irqrestore(&global_clkregs_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* - * clk_disable - inform the system when the clock source is no longer required - */ -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&global_clkregs_lock, flags); - local_clk_disable(clk); - spin_unlock_irqrestore(&global_clkregs_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -/* - * clk_get_rate - obtain the current clock rate (in Hz) for a clock source - */ -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->get_rate(clk); -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * clk_set_rate - set the clock rate for a clock source - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - /* - * Most system clocks can only be enabled or disabled, with - * the actual rate set as part of the peripheral dividers - * instead of high level clock control - */ - if (clk->set_rate) - ret = clk->set_rate(clk, rate); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* - * clk_round_rate - adjust a rate to the exact rate a clock can provide - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk->round_rate) - rate = clk->round_rate(clk, rate); - else - rate = clk->get_rate(clk); - - return rate; -} -EXPORT_SYMBOL(clk_round_rate); - -/* - * clk_set_parent - set the parent clock source for this clock - */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - /* Clock re-parenting is not supported */ - return -EINVAL; -} -EXPORT_SYMBOL(clk_set_parent); - -/* - * clk_get_parent - get the parent clock source for this clock - */ -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -static struct clk_lookup lookups[] = { - CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz), - CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397), - CLKDEV_INIT(NULL, "osc_main", &osc_main), - CLKDEV_INIT(NULL, "sys_ck", &clk_sys), - CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll), - CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll), - CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk), - CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk), - CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0), - CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1), - CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2), - CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3), - CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9), - CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), - CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), - CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm), - CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm), - CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), - CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), - CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), - CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6), - CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0), - CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1), - CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2), - CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0), - CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1), - CLKDEV_INIT("40050000.key", NULL, &clk_kscan), - CLKDEV_INIT("20020000.flash", NULL, &clk_nand), - CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc), - CLKDEV_INIT("40048000.adc", NULL, &clk_adc), - CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0), - CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1), - CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc), - CLKDEV_INIT("20098000.sd", NULL, &clk_mmc), - CLKDEV_INIT("31060000.ethernet", NULL, &clk_net), - CLKDEV_INIT("dev:clcd", NULL, &clk_lcd), - CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd), - CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd), - CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev), - CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host), - CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc), -}; - -static int __init clk_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - /* - * Setup muxed SYSCLK for HCLK PLL base -this selects the - * parent clock used for the ARM PLL and is used to derive - * the many system clock rates in the device. - */ - if (clk_is_sysclk_mainosc() != 0) - clk_sys.parent = &osc_main; - else - clk_sys.parent = &osc_pll397; - - clk_sys.rate = clk_sys.parent->rate; - - /* Compute the current ARM PLL and USB PLL frequencies */ - local_update_armpll_rate(); - - /* Compute HCLK and PCLK bus rates */ - clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div(); - clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div(); - - /* - * Enable system clocks - this step is somewhat formal, as the - * clocks are already running, but it does get the clock data - * inline with the actual system state. Never disable these - * clocks as they will only stop if the system is going to sleep. - * In that case, the chip/system power management functions will - * handle clock gating. - */ - if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk)) - printk(KERN_ERR "Error enabling system HCLK and PCLK\n"); - - /* - * Timers 0 and 1 were enabled and are being used by the high - * resolution tick function prior to this driver being initialized. - * Tag them now as used. - */ - if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1)) - printk(KERN_ERR "Error enabling timer tick clocks\n"); - - return 0; -} -core_initcall(clk_init); - diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 716e83eb1db8..5b7a1e78c3a5 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -194,21 +194,6 @@ void __init lpc32xx_map_io(void) iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc)); } -void lpc23xx_restart(enum reboot_mode mode, const char *cmd) -{ - /* Make sure WDT clocks are enabled */ - __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN, - LPC32XX_CLKPWR_TIMER_CLK_CTRL); - - /* Instant assert of RESETOUT_N with pulse length 1mS */ - __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18)); - __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC)); - - /* Wait for watchdog to reset system */ - while (1) - ; -} - static int __init lpc32xx_check_uid(void) { u32 uid[4]; diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 1cd8853b2f9b..2d90801ed1e1 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -30,7 +30,6 @@ extern void lpc32xx_timer_init(void); extern void __init lpc32xx_init_irq(void); extern void __init lpc32xx_map_io(void); extern void __init lpc32xx_serial_init(void); -extern void lpc23xx_restart(enum reboot_mode, const char *); /* diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 77d6b1bab278..b2f9e226febe 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -36,7 +36,6 @@ #include <linux/clk.h> #include <linux/mtd/lpc32xx_slc.h> #include <linux/mtd/lpc32xx_mlc.h> -#include <linux/platform_data/gpio-lpc32xx.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -48,13 +47,6 @@ #include "common.h" /* - * Mapped GPIOLIB GPIOs - */ -#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) -#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) -#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5) - -/* * AMBA LCD controller */ static struct clcd_panel conn_lcd_panel = { @@ -86,8 +78,8 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb) { dma_addr_t dma; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, - PANEL_SIZE, &dma, GFP_KERNEL); + fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma, + GFP_KERNEL); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; @@ -97,59 +89,25 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb) fb->fb.fix.smem_len = PANEL_SIZE; fb->panel = &conn_lcd_panel; - if (gpio_request(LCD_POWER_GPIO, "LCD power")) - printk(KERN_ERR "Error requesting gpio %u", - LCD_POWER_GPIO); - else if (gpio_direction_output(LCD_POWER_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - LCD_POWER_GPIO); - - if (gpio_request(BKL_POWER_GPIO, "LCD backlight power")) - printk(KERN_ERR "Error requesting gpio %u", - BKL_POWER_GPIO); - else if (gpio_direction_output(BKL_POWER_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - BKL_POWER_GPIO); - return 0; } static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, fb->fb.fix.smem_start, - fb->fb.fix.smem_len); + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); } static void lpc32xx_clcd_remove(struct clcd_fb *fb) { - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); -} - -/* - * On some early LCD modules (1307.0), the backlight logic is inverted. - * For those board variants, swap the disable and enable states for - * BKL_POWER_GPIO. -*/ -static void clcd_disable(struct clcd_fb *fb) -{ - gpio_set_value(BKL_POWER_GPIO, 0); - gpio_set_value(LCD_POWER_GPIO, 0); -} - -static void clcd_enable(struct clcd_fb *fb) -{ - gpio_set_value(BKL_POWER_GPIO, 1); - gpio_set_value(LCD_POWER_GPIO, 1); + dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, + fb->fb.fix.smem_start); } static struct clcd_board lpc32xx_clcd_data = { .name = "Phytec LCD", .check = clcdfb_check, .decode = clcdfb_decode, - .disable = clcd_disable, - .enable = clcd_enable, .setup = lpc32xx_clcd_setup, .mmap = lpc32xx_clcd_mmap, .remove = lpc32xx_clcd_remove, @@ -188,20 +146,9 @@ static struct pl08x_platform_data pl08x_pd = { .mem_buses = PL08X_AHB1, }; -static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios) -{ - /* Only on and off are supported */ - if (ios->power_mode == MMC_POWER_OFF) - gpio_set_value(MMC_PWR_ENABLE_GPIO, 0); - else - gpio_set_value(MMC_PWR_ENABLE_GPIO, 1); - return 0; -} - static struct mmci_platform_data lpc32xx_mmci_data = { .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | MMC_VDD_33_34, - .ios_handler = mmc_handle_ios, }; static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { @@ -260,8 +207,6 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)") .atag_offset = 0x100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, - .init_time = lpc32xx_timer_init, .init_machine = lpc3250_machine_init, .dt_compat = lpc32xx_dt_compat, - .restart = lpc23xx_restart, MACHINE_END diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 05621a29fba2..1931229a1eaa 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -76,9 +76,6 @@ void __init lpc32xx_serial_init(void) unsigned int puart; int i, j; - /* UART clocks are off, let clock driver manage them */ - __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL); - for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { clk = clk_get(NULL, uartinit_data[i].uart_ck_name); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c deleted file mode 100644 index ff3499d1fb1a..000000000000 --- a/arch/arm/mach-lpc32xx/timer.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/timer.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2009 - 2010 NXP Semiconductors - * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven - * Ed Schouten <e.schouten@fontys.nl> - * Laurens Timmermans <l.timmermans@fontys.nl> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/time.h> -#include <linux/err.h> -#include <linux/clockchips.h> - -#include <asm/mach/time.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "common.h" - -static int lpc32xx_clkevt_next_event(unsigned long delta, - struct clock_event_device *dev) -{ - __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, - LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, - LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - - return 0; -} - -static int lpc32xx_shutdown(struct clock_event_device *evt) -{ - /* - * Disable the timer. When using oneshot, we must also - * disable the timer to wait for the first call to - * set_next_event(). - */ - __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - return 0; -} - -static struct clock_event_device lpc32xx_clkevt = { - .name = "lpc32xx_clkevt", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 300, - .set_next_event = lpc32xx_clkevt_next_event, - .set_state_shutdown = lpc32xx_shutdown, - .set_state_oneshot = lpc32xx_shutdown, -}; - -static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &lpc32xx_clkevt; - - /* Clear match */ - __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), - LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction lpc32xx_timer_irq = { - .name = "LPC32XX Timer Tick", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = lpc32xx_timer_interrupt, -}; - -/* - * The clock management driver isn't initialized at this point, so the - * clocks need to be enabled here manually and then tagged as used in - * the clock driver initialization - */ -void __init lpc32xx_timer_init(void) -{ - u32 clkrate, pllreg; - - /* Enable timer clock */ - __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN | - LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, - LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1); - - /* - * The clock driver isn't initialized at this point. So determine if - * the SYSCLK is driven from the PLL397 or main oscillator and then use - * it to compute the PLL frequency and the PCLK divider to get the base - * timer rates. This rate is needed to compute the tick rate. - */ - if (clk_is_sysclk_mainosc() != 0) - clkrate = LPC32XX_MAIN_OSC_FREQ; - else - clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ; - - /* Get ARM HCLKPLL register and convert it into a frequency */ - pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; - clkrate = clk_get_pllrate_from_reg(clkrate, pllreg); - - /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */ - clkrate = clkrate / clk_get_pclk_div(); - - /* Initial timer setup */ - __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), - LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) | - LPC32XX_TIMER_CNTR_MCR_STOP(0) | - LPC32XX_TIMER_CNTR_MCR_RESET(0), - LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); - - /* Setup tick interrupt */ - setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq); - - /* Setup the clockevent structure. */ - lpc32xx_clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1); - - /* Use timer1 as clock source. */ - __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, - LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, - LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - - clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE), - "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up); -} diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot deleted file mode 100644 index 5edf03e2beed..000000000000 --- a/arch/arm/mach-mmp/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ - zreladdr-y += 0x00008000 diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index a32575fa3fba..c32f85559c65 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_MV78XX0 - bool "Marvell MV78xx0" if ARCH_MULTI_V5 + bool "Marvell MV78xx0" + depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select MVEBU_MBUS diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-mv78xx0/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index a1a04df9c05c..99cc93900a24 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -405,9 +405,8 @@ void __init mv78xx0_init(void) printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); -#ifdef CONFIG_CACHE_FEROCEON_L2 - feroceon_l2_init(is_l2_writethrough()); -#endif + if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2)) + feroceon_l2_init(is_l2_writethrough()); /* Setup root of clk tree */ clk_init(); diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 64e3d2ce9a07..b003e3afd693 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -3,7 +3,6 @@ menuconfig ARCH_MVEBU depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO - select GENERIC_IRQ_CHIP select PINCTRL select PLAT_ORION select SOC_BUS @@ -29,6 +28,7 @@ config MACH_ARMADA_370 bool "Marvell Armada 370 boards" depends on ARCH_MULTI_V7 select ARMADA_370_CLK + select ARMADA_370_XP_IRQ select CPU_PJ4B select MACH_MVEBU_V7 select PINCTRL_ARMADA_370 @@ -39,6 +39,7 @@ config MACH_ARMADA_370 config MACH_ARMADA_375 bool "Marvell Armada 375 boards" depends on ARCH_MULTI_V7 + select ARMADA_370_XP_IRQ select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC @@ -58,6 +59,7 @@ config MACH_ARMADA_38X select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC + select ARMADA_370_XP_IRQ select ARMADA_38X_CLK select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP @@ -72,6 +74,7 @@ config MACH_ARMADA_39X bool "Marvell Armada 39x boards" depends on ARCH_MULTI_V7 select ARM_GIC + select ARMADA_370_XP_IRQ select ARMADA_39X_CLK select CACHE_L2X0 select HAVE_ARM_SCU @@ -86,6 +89,7 @@ config MACH_ARMADA_39X config MACH_ARMADA_XP bool "Marvell Armada XP boards" depends on ARCH_MULTI_V7 + select ARMADA_370_XP_IRQ select ARMADA_XP_CLK select CPU_PJ4B select MACH_MVEBU_V7 diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 55348ee5a352..7e989d61159c 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -107,7 +107,7 @@ static struct notifier_block mvebu_hwcc_nb = { .notifier_call = mvebu_hwcc_notifier, }; -static struct notifier_block mvebu_hwcc_pci_nb = { +static struct notifier_block mvebu_hwcc_pci_nb __maybe_unused = { .notifier_call = mvebu_hwcc_notifier, }; diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index f9597b701028..46c742d3bd41 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -140,6 +140,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) panic("Cannot find 'marvell,bootrom' compatible node"); err = of_address_to_resource(node, 0, &res); + of_node_put(node); if (err < 0) panic("Cannot get 'bootrom' node address"); diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig index 3d90ef19be2b..2da8e5dfcf24 100644 --- a/arch/arm/mach-netx/Kconfig +++ b/arch/arm/mach-netx/Kconfig @@ -3,20 +3,17 @@ menu "NetX Implementations" config MACH_NXDKN bool "Enable Hilscher nxdkn Eval Board support" - depends on ARCH_NETX help Board support for the Hilscher NetX Eval Board config MACH_NXDB500 bool "Enable Hilscher nxdb500 Eval Board support" - depends on ARCH_NETX select ARM_AMBA help Board support for the Hilscher nxdb500 Eval Board config MACH_NXEB500HMI bool "Enable Hilscher nxeb500hmi Eval Board support" - depends on ARCH_NETX select ARM_AMBA help Board support for the Hilscher nxeb500hmi Eval Board diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index d122ee6ab991..8814ee5e98fd 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -42,8 +42,8 @@ int netx_clcd_setup(struct clcd_fb *fb) fb->panel = netx_panel; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, 1024*1024, - &dma, GFP_KERNEL); + fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma, + GFP_KERNEL); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; @@ -57,16 +57,14 @@ int netx_clcd_setup(struct clcd_fb *fb) int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); } void netx_clcd_remove(struct clcd_fb *fb) { - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, + fb->fb.fix.smem_start); } static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h index 5cb1051b5831..033875dbc32b 100644 --- a/arch/arm/mach-netx/include/mach/uncompress.h +++ b/arch/arm/mach-netx/include/mach/uncompress.h @@ -40,7 +40,7 @@ #define FR_BUSY (1<<3) #define FR_TXFF (1<<5) -static void putc(char c) +static inline void putc(char c) { unsigned long base; diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-nspire/Makefile.boot +++ /dev/null diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c index abea12617b17..ea0e5b2ca1cd 100644 --- a/arch/arm/mach-nspire/clcd.c +++ b/arch/arm/mach-nspire/clcd.c @@ -90,8 +90,8 @@ int nspire_clcd_setup(struct clcd_fb *fb) panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8; panel_size = ALIGN(panel_size, PAGE_SIZE); - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, - panel_size, &dma, GFP_KERNEL); + fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, panel_size, &dma, + GFP_KERNEL); if (!fb->fb.screen_base) { pr_err("CLCD: unable to map framebuffer\n"); @@ -107,13 +107,12 @@ int nspire_clcd_setup(struct clcd_fb *fb) int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, fb->fb.fix.smem_start, - fb->fb.fix.smem_len); + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); } void nspire_clcd_remove(struct clcd_fb *fb) { - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, + fb->fb.fix.smem_start); } diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index 4869633de8cd..9cca6a56788f 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -45,7 +45,7 @@ static void set_omap_uart_info(unsigned char port) *uart_info = port; } -static void putc(int c) +static inline void putc(int c) { if (!uart_base) return; diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot deleted file mode 100644 index b03e562acc60..000000000000 --- a/arch/arm/mach-omap2/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 809827265fb3..bab814d2f37d 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -18,6 +18,7 @@ #include <asm/setup.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> #include "common.h" @@ -77,12 +78,31 @@ static const char *const n900_boards_compat[] __initconst = { NULL, }; +/* Set system_rev from atags */ +static void __init rx51_set_system_rev(const struct tag *tags) +{ + const struct tag *tag; + + if (tags->hdr.tag != ATAG_CORE) + return; + + for_each_tag(tag, tags) { + if (tag->hdr.tag == ATAG_REVISION) { + system_rev = tag->u.revision.rev; + break; + } + } +} + /* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags, * save them while the data is still not overwritten */ static void __init rx51_reserve(void) { - save_atags((const struct tag *)(PAGE_OFFSET + 0x100)); + const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100); + + save_atags(tags); + rx51_set_system_rev(tags); omap_reserve(); } diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index cf5855174c93..1662071bb2cc 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -36,7 +36,6 @@ static void __iomem *omap2_ctrl_base; static s16 omap2_ctrl_offset; -static struct regmap *omap2_ctrl_syscon; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) struct omap3_scratchpad { @@ -166,16 +165,9 @@ u16 omap_ctrl_readw(u16 offset) u32 omap_ctrl_readl(u16 offset) { - u32 val; - offset &= 0xfffc; - if (!omap2_ctrl_syscon) - val = readl_relaxed(omap2_ctrl_base + offset); - else - regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset, - &val); - return val; + return readl_relaxed(omap2_ctrl_base + offset); } void omap_ctrl_writeb(u8 val, u16 offset) @@ -207,11 +199,7 @@ void omap_ctrl_writew(u16 val, u16 offset) void omap_ctrl_writel(u32 val, u16 offset) { offset &= 0xfffc; - if (!omap2_ctrl_syscon) - writel_relaxed(val, omap2_ctrl_base + offset); - else - regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset, - val); + writel_relaxed(val, omap2_ctrl_base + offset); } #ifdef CONFIG_ARCH_OMAP3 @@ -715,8 +703,6 @@ int __init omap_control_init(void) if (IS_ERR(syscon)) return PTR_ERR(syscon); - omap2_ctrl_syscon = syscon; - if (of_get_child_by_name(scm_conf, "clocks")) { ret = omap2_clk_provider_init(scm_conf, data->index, @@ -724,9 +710,6 @@ int __init omap_control_init(void) if (ret) return ret; } - - iounmap(omap2_ctrl_base); - omap2_ctrl_base = NULL; } else { /* No scm_conf found, direct access */ ret = omap2_clk_provider_init(np, data->index, NULL, diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index aa7b379e2661..2a3db0bd9e15 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -34,6 +34,7 @@ #include "pm.h" #include "control.h" #include "common.h" +#include "soc.h" /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { @@ -315,6 +316,69 @@ static struct cpuidle_driver omap3_idle_driver = { .safe_state_index = 0, }; +/* + * Numbers based on measurements made in October 2009 for PM optimized kernel + * with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP, + * and worst case latencies). + */ +static struct cpuidle_driver omap3430_idle_driver = { + .name = "omap3430_idle", + .owner = THIS_MODULE, + .states = { + { + .enter = omap3_enter_idle_bm, + .exit_latency = 110 + 162, + .target_residency = 5, + .name = "C1", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 106 + 180, + .target_residency = 309, + .name = "C2", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 107 + 410, + .target_residency = 46057, + .name = "C3", + .desc = "MPU RET + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 121 + 3374, + .target_residency = 46057, + .name = "C4", + .desc = "MPU OFF + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 855 + 1146, + .target_residency = 46057, + .name = "C5", + .desc = "MPU RET + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7580 + 4134, + .target_residency = 484329, + .name = "C6", + .desc = "MPU OFF + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7505 + 15274, + .target_residency = 484329, + .name = "C7", + .desc = "MPU OFF + CORE OFF", + }, + }, + .state_count = ARRAY_SIZE(omap3_idle_data), + .safe_state_index = 0, +}; + /* Public functions */ /** @@ -333,5 +397,8 @@ int __init omap3_idle_init(void) if (!mpu_pd || !core_pd || !per_pd || !cam_pd) return -ENODEV; - return cpuidle_register(&omap3_idle_driver, NULL); + if (cpu_is_omap3430()) + return cpuidle_register(&omap3430_idle_driver, NULL); + else + return cpuidle_register(&omap3_idle_driver, NULL); } diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 7b76ce01c21d..8633c703546a 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base) static void set_onenand_cfg(void __iomem *onenand_base) { - u32 reg; + u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT; - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; if (onenand_flags & ONENAND_FLAG_SYNCREAD) @@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); } @@ -289,6 +288,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) } } + onenand_async.sync_write = true; omap2_onenand_calc_async_timings(&t); ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 0437537751bc..f7ff3b9dad87 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -191,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb, { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od; + int err; switch (event) { case BUS_NOTIFY_DEL_DEVICE: if (pdev->archdata.od) omap_device_delete(pdev->archdata.od); break; + case BUS_NOTIFY_UNBOUND_DRIVER: + od = to_omap_device(pdev); + if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) { + dev_info(dev, "enabled after unload, idling\n"); + err = omap_device_idle(pdev); + if (err) + dev_err(dev, "failed to idle\n"); + } + break; case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) omap_device_build_from_dt(pdev); @@ -602,8 +612,10 @@ static int _od_runtime_resume(struct device *dev) int ret; ret = omap_device_enable(pdev); - if (ret) + if (ret) { + dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n"); return ret; + } return pm_generic_runtime_resume(dev); } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e9f65fec55c0..b6d62e4cdfdd 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2200,6 +2200,11 @@ static int _enable(struct omap_hwmod *oh) */ static int _idle(struct omap_hwmod *oh) { + if (oh->flags & HWMOD_NO_IDLE) { + oh->_int_flags |= _HWMOD_SKIP_ENABLE; + return 0; + } + pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { @@ -2504,6 +2509,8 @@ static int __init _init(struct omap_hwmod *oh, void *data) oh->flags |= HWMOD_INIT_NO_RESET; if (of_find_property(np, "ti,no-idle-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_IDLE; + if (of_find_property(np, "ti,no-idle", NULL)) + oh->flags |= HWMOD_NO_IDLE; } oh->_state = _HWMOD_STATE_INITIALIZED; @@ -2630,7 +2637,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh) * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data - * it should be set by the core code as a runtime flag during startup */ - if ((oh->flags & HWMOD_INIT_NO_IDLE) && + if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) && (postsetup_state == _HWMOD_STATE_IDLE)) { oh->_int_flags |= _HWMOD_SKIP_ENABLE; postsetup_state = _HWMOD_STATE_ENABLED; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 76bce11c85a4..7c7a31169475 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -525,6 +525,8 @@ struct omap_hwmod_omap4_prcm { * or idled. * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to * operate and they need to be handled at the same time as the main_clk. + * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain + * IPs like CPSW on DRA7, where clocks to this module cannot be disabled. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -541,6 +543,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_SWSUP_SIDLE_ACT (1 << 12) #define HWMOD_RECONFIG_IO_CHAIN (1 << 13) #define HWMOD_OPT_CLKS_NEEDED (1 << 14) +#define HWMOD_NO_IDLE (1 << 15) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 609e2397ea47..39736ad2a754 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -465,6 +465,7 @@ static struct omap_hwmod dm81xx_elm_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__elm = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_elm_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -514,6 +515,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio1_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -540,6 +542,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio2_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -664,7 +667,7 @@ static struct omap_hwmod dm814x_timer1_hwmod = { static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm814x_timer1_hwmod, - .clk = "timer1_fck", + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -701,7 +704,7 @@ static struct omap_hwmod dm814x_timer2_hwmod = { static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm814x_timer2_hwmod, - .clk = "timer2_fck", + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -1159,6 +1162,7 @@ static struct omap_hwmod dm81xx_mailbox_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_mailbox_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -1193,6 +1197,7 @@ static struct omap_hwmod dm81xx_spinbox_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_spinbox_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index f164c6b32ce2..8e072de89fed 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -252,7 +252,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, info = omap_serial_default_info; oh = uart->oh; - name = DRIVER_NAME; + name = OMAP_SERIAL_DRIVER_NAME; omap_up.dma_enabled = info->dma_enabled; omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index a9ad95f000a1..a2af15822fcb 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -28,14 +28,14 @@ config ARCH_ORION5X_DT config MACH_DB88F5281 bool "Marvell Orion-2 Development Board" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell Orion-2 (88F5281) Development Board config MACH_RD88F5182 bool "Marvell Orion-NAS Reference Design" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2 @@ -43,14 +43,14 @@ config MACH_RD88F5182 config MACH_RD88F5182_DT bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)" select ARCH_ORION5X_DT - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2, Flattened Device Tree. config MACH_KUROBOX_PRO bool "KuroBox Pro" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the KuroBox Pro platform. @@ -58,7 +58,7 @@ config MACH_KUROBOX_PRO config MACH_DNS323 bool "D-Link DNS-323" select GENERIC_NET_UTILS - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the D-Link DNS-323 platform. @@ -78,7 +78,7 @@ config MACH_TERASTATION_PRO2 config MACH_LINKSTATION_PRO bool "Buffalo Linkstation Pro/Live" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Buffalo Linkstation Pro/Live platform. Both v1 and @@ -86,7 +86,7 @@ config MACH_LINKSTATION_PRO config MACH_LINKSTATION_LSCHL bool "Buffalo Linkstation Live v3 (LS-CHL)" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Buffalo Linkstation Live v3 (LS-CHL) platform. @@ -100,7 +100,7 @@ config MACH_LINKSTATION_MINI config MACH_LINKSTATION_LS_HGL bool "Buffalo Linkstation LS-HGL" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Buffalo Linkstation LS-HGL platform. @@ -139,7 +139,7 @@ config MACH_D2NET_DT config MACH_NET2BIG bool "LaCie 2Big Network" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the LaCie 2Big Network NAS. diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-orion5x/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index f998eb1c698e..0cf4426183cf 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_SIRF bool "CSR SiRF" depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER + select RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP select NO_IOPORT_MAP diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot deleted file mode 100644 index c77a4883a4ee..000000000000 --- a/arch/arm/mach-prima2/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h index 1b80a4805a60..e69de29bb2d1 100644 --- a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h +++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h @@ -1,163 +0,0 @@ -#ifndef _ASM_ARCH_PXA25X_UDC_H -#define _ASM_ARCH_PXA25X_UDC_H - -#ifdef _ASM_ARCH_PXA27X_UDC_H -#error "You can't include both PXA25x and PXA27x UDC support" -#endif - -#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ -#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ -#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -/* Bulk IN - Endpoint 1,6,11 */ -#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -/* Bulk OUT - Endpoint 2,7,12 */ -#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -/* Isochronous IN - Endpoint 3,8,13 */ -#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -/* Isochronous OUT - Endpoint 4,9,14 */ -#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -/* Interrupt IN - Endpoint 5,10,15 */ -#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ -#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ -#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ -#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ -#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ -#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ -#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ -#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ -#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ -#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ -#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ -#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ -#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ -#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ -#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ -#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ -#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ -#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ -#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ -#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ -#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ -#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ -#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ -#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ - -#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - -#endif diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8347d87a713d..5a941bd3dbed 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -18,12 +18,13 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/property.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/smsc911x.h> #include <linux/input.h> -#include <linux/rotary_encoder.h> #include <linux/gpio_keys.h> #include <linux/input/eeti_ts.h> #include <linux/leds.h> @@ -366,22 +367,31 @@ static struct pxaohci_platform_data raumfeld_ohci_info = { * Rotary encoder input device */ -static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = { - .steps = 24, - .axis = REL_X, - .relative_axis = 1, - .gpio_a = GPIO_VOLENC_A, - .gpio_b = GPIO_VOLENC_B, - .inverted_a = 1, - .inverted_b = 0, +static struct gpiod_lookup_table raumfeld_rotary_gpios_table = { + .dev_id = "rotary-encoder.0", + .table = { + GPIO_LOOKUP_IDX("gpio-0", + GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-0", + GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct property_entry raumfeld_rotary_properties[] = { + PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24), + PROPERTY_ENTRY_INTEGER("linux,axis", u32, REL_X), + PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis", u32, 1), + { }, +}; + +static struct property_set raumfeld_rotary_property_set = { + .properties = raumfeld_rotary_properties, }; static struct platform_device rotary_encoder_device = { .name = "rotary-encoder", .id = 0, - .dev = { - .platform_data = &raumfeld_rotary_encoder_info, - } }; /** @@ -1051,7 +1061,12 @@ static void __init __maybe_unused raumfeld_controller_init(void) int ret; pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config)); + + gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); + device_add_property_set(&rotary_encoder_device.dev, + &raumfeld_rotary_property_set); platform_device_register(&rotary_encoder_device); + spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1); @@ -1086,6 +1101,10 @@ static void __init __maybe_unused raumfeld_speaker_init(void) i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); platform_device_register(&smc91x_device); + + gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); + device_add_property_set(&rotary_encoder_device.dev, + &raumfeld_rotary_property_set); platform_device_register(&rotary_encoder_device); raumfeld_audio_init(); diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot deleted file mode 100644 index d2c3d788f688..000000000000 --- a/arch/arm/mach-realview/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ -ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y) - zreladdr-y += 0x70008000 -params_phys-y := 0x70000100 -initrd_phys-y := 0x70800000 -else - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 -endif diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h index 0fd4b0b8ef22..654a6f3f2547 100644 --- a/arch/arm/mach-rpc/include/mach/uncompress.h +++ b/arch/arm/mach-rpc/include/mach/uncompress.h @@ -76,7 +76,7 @@ int white; /* * This does not append a newline */ -static void putc(int c) +static inline void putc(int c) { extern void ll_write_char(char *, char c, char white); int x,y; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index ef68ecb27396..5884bbb7952e 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -405,7 +405,7 @@ config MACH_S3C2416_DT endif # CPU_S3C2416 -if CPU_S3C2440 +if CPU_S3C2440 || CPU_S3C2442 config S3C2440_XTAL_12000000 bool @@ -432,6 +432,9 @@ config S3C2440_PLL_16934400 default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. +endif + +if CPU_S3C2440 comment "S3C2440 Boards" @@ -460,7 +463,6 @@ config MACH_AT2440EVB config MACH_MINI2440 bool "MINI2440 development board" - select EEPROM_AT24 if I2C select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 6d1e0b9c5b27..27ae6877550f 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -154,6 +154,7 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = { #define ADC_NOM_CHG_DETECT_1A 6 #define ADC_NOM_CHG_DETECT_USB 43 +#ifdef CONFIG_PCF50633_ADC static void gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) { @@ -174,6 +175,7 @@ gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) pcf50633_mbc_usb_curlim_set(pcf, ma); } +#endif static struct delayed_work gta02_charger_work; static int gta02_usb_vbus_draw; diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 9f54300df4b3..7ed78619217c 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -664,7 +664,7 @@ static void __init h1940_map_io(void) /* Add latch gpio chip, set latch initial value */ h1940_latch_control(0, 0); - WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); + WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL)); } static void __init h1940_init_time(void) diff --git a/arch/arm/mach-s3c64xx/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot deleted file mode 100644 index c642333af3ed..000000000000 --- a/arch/arm/mach-s3c64xx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x50008000 -params_phys-y := 0x50000100 diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 8a894ee3ee76..92ec8c3b42b9 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -216,7 +216,7 @@ static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = { REGULATOR_SUPPLY("AVDD", "0-001b"), }; -static struct regulator_init_data smdk6410_b_pwr_5v_data = { +static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = { .constraints = { .always_on = 1, }, @@ -300,7 +300,7 @@ static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = { }; /* VDDARM, BUCK1 on J5 */ -static struct regulator_init_data smdk6410_vddarm = { +static struct regulator_init_data __maybe_unused smdk6410_vddarm = { .constraints = { .name = "PVDD_ARM", .min_uV = 1000000, @@ -313,7 +313,7 @@ static struct regulator_init_data smdk6410_vddarm = { }; /* VDD_INT, BUCK2 on J5 */ -static struct regulator_init_data smdk6410_vddint = { +static struct regulator_init_data __maybe_unused smdk6410_vddint = { .constraints = { .name = "PVDD_INT", .min_uV = 1000000, @@ -324,7 +324,7 @@ static struct regulator_init_data smdk6410_vddint = { }; /* VDD_HI, LDO3 on J5 */ -static struct regulator_init_data smdk6410_vddhi = { +static struct regulator_init_data __maybe_unused smdk6410_vddhi = { .constraints = { .name = "PVDD_HI", .always_on = 1, @@ -332,7 +332,7 @@ static struct regulator_init_data smdk6410_vddhi = { }; /* VDD_PLL, LDO2 on J5 */ -static struct regulator_init_data smdk6410_vddpll = { +static struct regulator_init_data __maybe_unused smdk6410_vddpll = { .constraints = { .name = "PVDD_PLL", .always_on = 1, @@ -340,7 +340,7 @@ static struct regulator_init_data smdk6410_vddpll = { }; /* VDD_UH_MMC, LDO5 on J5 */ -static struct regulator_init_data smdk6410_vdduh_mmc = { +static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = { .constraints = { .name = "PVDD_UH+PVDD_MMC", .always_on = 1, @@ -348,7 +348,7 @@ static struct regulator_init_data smdk6410_vdduh_mmc = { }; /* VCCM3BT, LDO8 on J5 */ -static struct regulator_init_data smdk6410_vccmc3bt = { +static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = { .constraints = { .name = "PVCCM3BT", .always_on = 1, @@ -356,7 +356,7 @@ static struct regulator_init_data smdk6410_vccmc3bt = { }; /* VCCM2MTV, LDO11 on J5 */ -static struct regulator_init_data smdk6410_vccm2mtv = { +static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = { .constraints = { .name = "PVCCM2MTV", .always_on = 1, @@ -364,7 +364,7 @@ static struct regulator_init_data smdk6410_vccm2mtv = { }; /* VDD_LCD, LDO12 on J5 */ -static struct regulator_init_data smdk6410_vddlcd = { +static struct regulator_init_data __maybe_unused smdk6410_vddlcd = { .constraints = { .name = "PVDD_LCD", .always_on = 1, @@ -372,7 +372,7 @@ static struct regulator_init_data smdk6410_vddlcd = { }; /* VDD_OTGI, LDO9 on J5 */ -static struct regulator_init_data smdk6410_vddotgi = { +static struct regulator_init_data __maybe_unused smdk6410_vddotgi = { .constraints = { .name = "PVDD_OTGI", .always_on = 1, @@ -380,7 +380,7 @@ static struct regulator_init_data smdk6410_vddotgi = { }; /* VDD_OTG, LDO14 on J5 */ -static struct regulator_init_data smdk6410_vddotg = { +static struct regulator_init_data __maybe_unused smdk6410_vddotg = { .constraints = { .name = "PVDD_OTG", .always_on = 1, @@ -388,7 +388,7 @@ static struct regulator_init_data smdk6410_vddotg = { }; /* VDD_ALIVE, LDO15 on J5 */ -static struct regulator_init_data smdk6410_vddalive = { +static struct regulator_init_data __maybe_unused smdk6410_vddalive = { .constraints = { .name = "PVDD_ALIVE", .always_on = 1, @@ -396,7 +396,7 @@ static struct regulator_init_data smdk6410_vddalive = { }; /* VDD_AUDIO, VLDO_AUDIO on J5 */ -static struct regulator_init_data smdk6410_vddaudio = { +static struct regulator_init_data __maybe_unused smdk6410_vddaudio = { .constraints = { .name = "PVDD_AUDIO", .always_on = 1, @@ -406,7 +406,7 @@ static struct regulator_init_data smdk6410_vddaudio = { #ifdef CONFIG_SMDK6410_WM1190_EV1 /* S3C64xx internal logic & PLL */ -static struct regulator_init_data wm8350_dcdc1_data = { +static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = { .constraints = { .name = "PVDD_INT+PVDD_PLL", .min_uV = 1200000, @@ -417,7 +417,7 @@ static struct regulator_init_data wm8350_dcdc1_data = { }; /* Memory */ -static struct regulator_init_data wm8350_dcdc3_data = { +static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = { .constraints = { .name = "PVDD_MEM", .min_uV = 1800000, @@ -437,7 +437,7 @@ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = { REGULATOR_SUPPLY("DVDD", "0-001b"), }; -static struct regulator_init_data wm8350_dcdc4_data = { +static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = { .constraints = { .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV", .min_uV = 3000000, @@ -449,7 +449,7 @@ static struct regulator_init_data wm8350_dcdc4_data = { }; /* OTGi/1190-EV1 HPVDD & AVDD */ -static struct regulator_init_data wm8350_ldo4_data = { +static struct regulator_init_data __maybe_unused wm8350_ldo4_data = { .constraints = { .name = "PVDD_OTGI+HPVDD+AVDD", .min_uV = 1200000, @@ -537,7 +537,7 @@ static struct wm831x_backlight_pdata wm1192_backlight_pdata = { .max_uA = 27554, }; -static struct regulator_init_data wm1192_dcdc3 = { +static struct regulator_init_data __maybe_unused wm1192_dcdc3 = { .constraints = { .name = "PVDD_MEM+PVDD_GPS", .always_on = 1, @@ -548,7 +548,7 @@ static struct regulator_consumer_supply wm1192_ldo1_consumers[] = { REGULATOR_SUPPLY("DVDD", "0-001b"), /* WM8580 */ }; -static struct regulator_init_data wm1192_ldo1 = { +static struct regulator_init_data __maybe_unused wm1192_ldo1 = { .constraints = { .name = "PVDD_LCD+PVDD_EXT", .always_on = 1, diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h index 73093dc89829..a1a041b9740b 100644 --- a/arch/arm/mach-sa1100/include/mach/uncompress.h +++ b/arch/arm/mach-sa1100/include/mach/uncompress.h @@ -19,7 +19,7 @@ #define UART(x) (*(volatile unsigned long *)(serial_port + (x))) -static void putc(int c) +static inline void putc(int c) { unsigned long serial_port; diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index d8965c682d2f..bb3ca9c763de 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -15,7 +15,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -369,7 +369,7 @@ static int __init simpad_init(void) cs3_gpio.get = cs3_gpio_get; cs3_gpio.direction_input = cs3_gpio_direction_input; cs3_gpio.direction_output = cs3_gpio_direction_output; - ret = gpiochip_add(&cs3_gpio); + ret = gpiochip_add_data(&cs3_gpio, NULL); if (ret) printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device"); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 2824b81f1a39..f2bc5c353119 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -102,6 +102,4 @@ config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" select ARCH_RMOBILE select RENESAS_INTC_IRQPIN - -comment "Renesas ARM SoCs System Configuration" endif diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 9cb11215ceba..5464b7a75e30 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -4,7 +4,6 @@ extern void shmobile_init_delay(void); extern void shmobile_boot_vector(void); extern unsigned long shmobile_boot_fn; -extern unsigned long shmobile_boot_arg; extern unsigned long shmobile_boot_size; extern void shmobile_smp_boot(void); extern void shmobile_smp_sleep(void); @@ -12,7 +11,8 @@ extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); extern bool shmobile_smp_cpu_can_disable(unsigned int cpu); extern void shmobile_boot_scu(void); -extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); +extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, + unsigned int max_cpus); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern int shmobile_smp_scu_cpu_kill(unsigned int cpu); extern struct platform_suspend_ops shmobile_suspend_ops; @@ -31,8 +31,6 @@ int shmobile_cpufreq_init(void); static inline int shmobile_cpufreq_init(void) { return 0; } #endif -extern void __iomem *shmobile_scu_base; - static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c index 57fbff024dcd..634d701c56a7 100644 --- a/arch/arm/mach-shmobile/cpufreq.c +++ b/arch/arm/mach-shmobile/cpufreq.c @@ -10,6 +10,8 @@ #include <linux/platform_device.h> +#include "common.h" + int __init shmobile_cpufreq_init(void) { platform_device_register_simple("cpufreq-dt", -1, NULL, 0); diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index fa5248c52399..936d7011c314 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -27,7 +27,7 @@ */ ENTRY(shmobile_boot_scu) @ r0 = SCU base address - mrc p15, 0, r1, c0, c0, 5 @ read MIPDR + mrc p15, 0, r1, c0, c0, 5 @ read MPIDR and r1, r1, #3 @ mask out cpu ID lsl r1, r1, #3 @ we will shift by cpu_id * 8 bits ldr r2, [r0, #8] @ SCU Power Status Register @@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu) b secondary_startup ENDPROC(shmobile_boot_scu) - - .text - .align 2 - .globl shmobile_scu_base -shmobile_scu_base: - .space 4 diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 330c1fc63197..32e0bf6e3ccb 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -24,7 +24,6 @@ .arm .align 12 ENTRY(shmobile_boot_vector) - ldr r0, 2f ldr r1, 1f bx r1 @@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector) .globl shmobile_boot_fn shmobile_boot_fn: 1: .space 4 - .globl shmobile_boot_arg -shmobile_boot_arg: -2: .space 4 .globl shmobile_boot_size shmobile_boot_size: .long . - shmobile_boot_vector @@ -46,13 +42,15 @@ shmobile_boot_size: */ ENTRY(shmobile_smp_boot) - @ r0 = MPIDR_HWID_BITMASK mrc p15, 0, r1, c0, c0, 5 @ r1 = MPIDR - and r0, r1, r0 @ r0 = cpu_logical_map() value + and r0, r1, #0xffffff @ MPIDR_HWID_BITMASK + @ r0 = cpu_logical_map() value mov r1, #0 @ r1 = CPU index - adr r5, 1f @ array of per-cpu mpidr values - adr r6, 2f @ array of per-cpu functions - adr r7, 3f @ array of per-cpu arguments + adr r2, 1f + ldmia r2, {r5, r6, r7} + add r5, r5, r2 @ array of per-cpu mpidr values + add r6, r6, r2 @ array of per-cpu functions + add r7, r7, r2 @ array of per-cpu arguments shmobile_smp_boot_find_mpidr: ldr r8, [r5, r1, lsl #2] @@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep) b shmobile_smp_boot ENDPROC(shmobile_smp_sleep) + .align 2 +1: .long shmobile_smp_mpidr - . + .long shmobile_smp_fn - 1b + .long shmobile_smp_arg - 1b + + .bss .globl shmobile_smp_mpidr shmobile_smp_mpidr: -1: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_fn shmobile_smp_fn: -2: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_arg shmobile_smp_arg: -3: .space NR_CPUS * 4 + .space NR_CPUS * 4 diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 911884f7e28b..aba75c89f9c1 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* perform per-cpu setup */ apmu_parse_cfg(apmu_init_cpu, apmu_config, num); diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index 64663110ab6c..8d478f1da265 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -17,6 +17,10 @@ #include <asm/smp_scu.h> #include "common.h" + +static phys_addr_t shmobile_scu_base_phys; +static void __iomem *shmobile_scu_base; + static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, unsigned long action, void *hcpu) { @@ -26,7 +30,7 @@ static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, case CPU_UP_PREPARE: /* For this particular CPU register SCU SMP boot vector */ shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu), - (unsigned long)shmobile_scu_base); + shmobile_scu_base_phys); break; }; @@ -37,13 +41,15 @@ static struct notifier_block shmobile_smp_scu_notifier = { .notifier_call = shmobile_smp_scu_notifier_call, }; -void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus) +void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, + unsigned int max_cpus) { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* enable SCU and cache coherency on booting CPU */ + shmobile_scu_base_phys = scu_base_phys; + shmobile_scu_base = ioremap(scu_base_phys, PAGE_SIZE); scu_enable(shmobile_scu_base); scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 9eccde3c7b13..6d0ebdfb03a2 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -182,8 +182,6 @@ static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname, return 0; } -struct cma *rcar_gen2_dma_contiguous; - void __init rcar_gen2_reserve(void) { struct memory_reserve_config mrc; @@ -194,8 +192,11 @@ void __init rcar_gen2_reserve(void) of_scan_flat_dt(rcar_gen2_scan_mem, &mrc); #ifdef CONFIG_DMA_CMA - if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) + if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) { + static struct cma *rcar_gen2_dma_contiguous; + dma_contiguous_reserve_area(mrc.size, mrc.base, 0, &rcar_gen2_dma_contiguous, true); + } #endif } diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 871220bf5870..3a732199cf5e 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -47,8 +47,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) } /* setup EMEV2 specific SCU bits */ - shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(EMEV2_SCU_BASE, max_cpus); } const struct smp_operations emev2_smp_ops __initconst = { diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index b854fe2095ad..f5c31fbc10b2 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -92,12 +92,9 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { /* Map the reset vector (in headsmp-scu.S, headsmp.S) */ __raw_writel(__pa(shmobile_boot_vector), AVECR); - shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); - shmobile_boot_arg = (unsigned long)shmobile_scu_base; /* setup r8a7779 specific SCU bits */ - shmobile_scu_base = IOMEM(R8A7779_SCU_BASE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus); r8a7779_pm_init(); diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index ee1a4b70604b..41137404382e 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -52,8 +52,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(__pa(shmobile_boot_vector), SBAR); /* setup sh73a0 specific SCU bits */ - shmobile_scu_base = IOMEM(SH73A0_SCU_BASE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(SH73A0_SCU_BASE, max_cpus); } const struct smp_operations sh73a0_smp_ops __initconst = { diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c index 5d92b5dd486b..74b30bade2c1 100644 --- a/arch/arm/mach-shmobile/suspend.c +++ b/arch/arm/mach-shmobile/suspend.c @@ -17,6 +17,8 @@ #include <asm/io.h> #include <asm/system_misc.h> +#include "common.h" + static int shmobile_suspend_default_enter(suspend_state_t suspend_state) { cpu_do_idle(); diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index c17d4d3881ff..ad008e4b0c49 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -18,6 +18,8 @@ #include <linux/delay.h> #include <linux/of_address.h> +#include "common.h" + static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, unsigned int mult, unsigned int div) { diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index b8f9e238e4ab..ed15db19e561 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -5,3 +5,5 @@ obj-y := socfpga.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_SOCFPGA_SUSPEND) += pm.o self-refresh.o +obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o +obj-$(CONFIG_EDAC_ALTERA_OCRAM) += ocram.o diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 5bc6ea87cdf7..575195be6687 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -36,6 +36,8 @@ extern void socfpga_init_clocks(void); extern void socfpga_sysmgr_init(void); +void socfpga_init_l2_ecc(void); +void socfpga_init_ocram_ecc(void); extern void __iomem *sys_manager_base_addr; extern void __iomem *rst_manager_base_addr; diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c new file mode 100644 index 000000000000..e3907ab58d05 --- /dev/null +++ b/arch/arm/mach-socfpga/l2_cache.c @@ -0,0 +1,41 @@ +/* + * Copyright Altera Corporation (C) 2016. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> + +void socfpga_init_l2_ecc(void) +{ + struct device_node *np; + void __iomem *mapped_l2_edac_addr; + + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-l2-ecc"); + if (!np) { + pr_err("Unable to find socfpga-l2-ecc in dtb\n"); + return; + } + + mapped_l2_edac_addr = of_iomap(np, 0); + of_node_put(np); + if (!mapped_l2_edac_addr) { + pr_err("Unable to find L2 ECC mapping in dtb\n"); + return; + } + + /* Enable ECC */ + writel(0x01, mapped_l2_edac_addr); + iounmap(mapped_l2_edac_addr); +} diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c new file mode 100644 index 000000000000..60ec643ac2be --- /dev/null +++ b/arch/arm/mach-socfpga/ocram.c @@ -0,0 +1,49 @@ +/* + * Copyright Altera Corporation (C) 2016. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/io.h> +#include <linux/genalloc.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#define ALTR_OCRAM_CLEAR_ECC 0x00000018 +#define ALTR_OCRAM_ECC_EN 0x00000019 + +void socfpga_init_ocram_ecc(void) +{ + struct device_node *np; + void __iomem *mapped_ocr_edac_addr; + + /* Find the OCRAM EDAC device tree node */ + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc"); + if (!np) { + pr_err("Unable to find socfpga-ocram-ecc\n"); + return; + } + + mapped_ocr_edac_addr = of_iomap(np, 0); + of_node_put(np); + if (!mapped_ocr_edac_addr) { + pr_err("Unable to map OCRAM ecc regs.\n"); + return; + } + + /* Clear any pending OCRAM ECC interrupts, then enable ECC */ + writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr); + writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr); + + iounmap(mapped_ocr_edac_addr); +} diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index cbb0a54df80a..07945748b571 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -94,6 +94,7 @@ static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus) scu_enable(socfpga_scu_base_addr); } +#ifdef CONFIG_HOTPLUG_CPU /* * platform-specific code to shutdown a CPU * @@ -116,6 +117,7 @@ static int socfpga_cpu_kill(unsigned int cpu) { return 1; } +#endif static const struct smp_operations socfpga_smp_ops __initconst = { .smp_prepare_cpus = socfpga_smp_prepare_cpus, diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index a1c0efaa8794..7e0aad2ec3d1 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -59,6 +59,11 @@ static void __init socfpga_init_irq(void) { irqchip_init(); socfpga_sysmgr_init(); + if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C)) + socfpga_init_l2_ecc(); + + if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM)) + socfpga_init_ocram_ecc(); } static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-spear/Makefile.boot b/arch/arm/mach-spear/Makefile.boot deleted file mode 100644 index 4674a4c221db..000000000000 --- a/arch/arm/mach-spear/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 49d1110cff53..52db8bf7e153 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -17,23 +17,25 @@ * */ +#include <linux/property.h> #include <linux/gpio/machine.h> #include <linux/platform_device.h> -#include <linux/rfkill-gpio.h> #include "board.h" -static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = { - .name = "wifi_rfkill", - .type = RFKILL_TYPE_WLAN, +static struct property_entry __initdata wifi_rfkill_prop[] = { + PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), + PROPERTY_ENTRY_STRING("type", "wlan"), + { }, +}; + +static struct property_set __initdata wifi_rfkill_pset = { + .properties = wifi_rfkill_prop, }; static struct platform_device wifi_rfkill_device = { .name = "rfkill_gpio", .id = -1, - .dev = { - .platform_data = &wifi_rfkill_platform_data, - }, }; static struct gpiod_lookup_table wifi_gpio_lookup = { @@ -47,6 +49,7 @@ static struct gpiod_lookup_table wifi_gpio_lookup = { void __init tegra_paz00_wifikill_init(void) { + platform_device_add_properties(&wifi_rfkill_device, &wifi_rfkill_pset); gpiod_add_lookup_table(&wifi_gpio_lookup); platform_device_register(&wifi_rfkill_device); } diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot deleted file mode 100644 index 87811de0bd94..000000000000 --- a/arch/arm/mach-u300/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x48008000 -params_phys-y := 0x48000100 -# This isn't used. -#initrd_phys-y := 0x48800000 diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-ux500/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index a0ffaad1fb61..a557955472ea 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -76,17 +76,19 @@ static struct arm_pmu_platdata db8500_pmu_platdata = { static const char *db8500_read_soc_id(void) { void __iomem *uid; + const char *retstr; uid = ioremap(U8500_BB_UID_BASE, 0x20); if (!uid) return NULL; /* Throw these device-specific numbers into the entropy pool */ add_device_randomness(uid, 0x14); - return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", + retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", readl((u32 *)uid+0), readl((u32 *)uid+1), readl((u32 *)uid+2), readl((u32 *)uid+3), readl((u32 *)uid+4)); iounmap(uid); + return retstr; } static struct device * __init db8500_soc_device_init(void) diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c index ba05aec7ea4b..55d1a00dbd28 100644 --- a/arch/arm/mach-w90x900/gpio.c +++ b/arch/arm/mach-w90x900/gpio.c @@ -20,7 +20,7 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> @@ -30,7 +30,6 @@ #define GPIO_IN (0x0C) #define GROUPINERV (0x10) #define GPIO_GPIO(Nb) (0x00000001 << (Nb)) -#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip) #define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio) \ { \ @@ -53,7 +52,7 @@ struct nuc900_gpio_chip { static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *pio = nuc900_gpio->regbase + GPIO_IN; unsigned int regval; @@ -65,7 +64,7 @@ static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset) static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT; unsigned int regval; unsigned long flags; @@ -86,7 +85,7 @@ static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val) static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR; unsigned int regval; unsigned long flags; @@ -104,7 +103,7 @@ static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset) static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT; void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR; unsigned int regval; @@ -149,6 +148,6 @@ void __init nuc900_init_gpio(int nr_group) gpio_chip = &nuc900_gpio[i]; spin_lock_init(&gpio_chip->gpio_lock); gpio_chip->regbase = GPIO_BASE + i * GROUPINERV; - gpiochip_add(&gpio_chip->chip); + gpiochip_add_data(&gpio_chip->chip, gpio_chip); } } diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h index 4b7c324ff664..3855ecebda6e 100644 --- a/arch/arm/mach-w90x900/include/mach/uncompress.h +++ b/arch/arm/mach-w90x900/include/mach/uncompress.h @@ -27,7 +27,7 @@ #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) static volatile u32 * const uart_base = (u32 *)UART0_PA; -static void putc(int ch) +static inline void putc(int ch) { /* Check THRE and TEMT bits before we transmit the character. */ diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-zynq/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 549f6d3aec5b..55347662e5ed 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -1037,24 +1037,26 @@ config ARCH_SUPPORTS_BIG_ENDIAN This option specifies the architecture can support big endian operation. -config ARM_KERNMEM_PERMS - bool "Restrict kernel memory permissions" - depends on MMU - help - If this is set, kernel memory other than kernel text (and rodata) - will be made non-executable. The tradeoff is that each region is - padded to section-size (1MiB) boundaries (because their permissions - are different and splitting the 1M pages into 4K ones causes TLB - performance problems), wasting memory. - config DEBUG_RODATA bool "Make kernel text and rodata read-only" - depends on ARM_KERNMEM_PERMS + depends on MMU && !XIP_KERNEL + default y if CPU_V7 + help + If this is set, kernel text and rodata memory will be made + read-only, and non-text kernel memory will be made non-executable. + The tradeoff is that each region is padded to section-size (1MiB) + boundaries (because their permissions are different and splitting + the 1M pages into 4K ones causes TLB performance problems), which + can waste memory. + +config DEBUG_ALIGN_RODATA + bool "Make rodata strictly non-executable" + depends on DEBUG_RODATA default y help - If this is set, kernel text and rodata will be made read-only. This - is to help catch accidental or malicious attempts to change the - kernel's executable code. Additionally splits rodata from kernel - text so it can be made explicitly non-executable. This creates - another section-size padded region, so it can waste more memory - space while gaining the read-only protections. + If this is set, rodata will be made explicitly non-executable. This + provides protection on the rare chance that attackers might find and + use ROP gadgets that exist in the rodata section. This adds an + additional section-aligned split of rodata from kernel text so it + can be made explicitly non-executable. This padding may waste memory + space to gain the additional protection. diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c index 1e373d268c04..88255bea65e4 100644 --- a/arch/arm/mm/cache-tauros2.c +++ b/arch/arm/mm/cache-tauros2.c @@ -22,6 +22,11 @@ #include <asm/cputype.h> #include <asm/hardware/cache-tauros2.h> +/* CP15 PJ4 Control configuration register */ +#define CCR_L2C_PREFETCH_DISABLE BIT(24) +#define CCR_L2C_ECC_ENABLE BIT(23) +#define CCR_L2C_WAY7_4_DISABLE BIT(21) +#define CCR_L2C_BURST8_ENABLE BIT(20) /* * When Tauros2 is used on a CPU that supports the v7 hierarchical @@ -182,18 +187,18 @@ static void enable_extra_feature(unsigned int features) u = read_extra_features(); if (features & CACHE_TAUROS2_PREFETCH_ON) - u &= ~0x01000000; + u &= ~CCR_L2C_PREFETCH_DISABLE; else - u |= 0x01000000; + u |= CCR_L2C_PREFETCH_DISABLE; pr_info("Tauros2: %s L2 prefetch.\n", (features & CACHE_TAUROS2_PREFETCH_ON) ? "Enabling" : "Disabling"); if (features & CACHE_TAUROS2_LINEFILL_BURST8) - u |= 0x00100000; + u |= CCR_L2C_BURST8_ENABLE; else - u &= ~0x00100000; - pr_info("Tauros2: %s line fill burt8.\n", + u &= ~CCR_L2C_BURST8_ENABLE; + pr_info("Tauros2: %s burst8 line fill.\n", (features & CACHE_TAUROS2_LINEFILL_BURST8) ? "Enabling" : "Disabling"); @@ -287,16 +292,15 @@ void __init tauros2_init(unsigned int features) node = of_find_matching_node(NULL, tauros2_ids); if (!node) { pr_info("Not found marvell,tauros2-cache, disable it\n"); - return; + } else { + ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f); + if (ret) { + pr_info("Not found marvell,tauros-cache-features property, " + "disable extra features\n"); + features = 0; + } else + features = f; } - - ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f); - if (ret) { - pr_info("Not found marvell,tauros-cache-features property, " - "disable extra features\n"); - features = 0; - } else - features = f; #endif tauros2_internal_init(features); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0eca3812527e..deac58d5f1f7 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -42,6 +42,55 @@ #include "dma.h" #include "mm.h" +struct arm_dma_alloc_args { + struct device *dev; + size_t size; + gfp_t gfp; + pgprot_t prot; + const void *caller; + bool want_vaddr; +}; + +struct arm_dma_free_args { + struct device *dev; + size_t size; + void *cpu_addr; + struct page *page; + bool want_vaddr; +}; + +struct arm_dma_allocator { + void *(*alloc)(struct arm_dma_alloc_args *args, + struct page **ret_page); + void (*free)(struct arm_dma_free_args *args); +}; + +struct arm_dma_buffer { + struct list_head list; + void *virt; + struct arm_dma_allocator *allocator; +}; + +static LIST_HEAD(arm_dma_bufs); +static DEFINE_SPINLOCK(arm_dma_bufs_lock); + +static struct arm_dma_buffer *arm_dma_buffer_find(void *virt) +{ + struct arm_dma_buffer *buf, *found = NULL; + unsigned long flags; + + spin_lock_irqsave(&arm_dma_bufs_lock, flags); + list_for_each_entry(buf, &arm_dma_bufs, list) { + if (buf->virt == virt) { + list_del(&buf->list); + found = buf; + break; + } + } + spin_unlock_irqrestore(&arm_dma_bufs_lock, flags); + return found; +} + /* * The DMA API is built upon the notion of "buffer ownership". A buffer * is either exclusively owned by the CPU (and therefore may be accessed @@ -592,7 +641,7 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot) #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c, wv) NULL #define __alloc_from_pool(size, ret_page) NULL #define __alloc_from_contiguous(dev, size, prot, ret, c, wv) NULL -#define __free_from_pool(cpu_addr, size) 0 +#define __free_from_pool(cpu_addr, size) do { } while (0) #define __free_from_contiguous(dev, page, cpu_addr, size, wv) do { } while (0) #define __dma_free_remap(cpu_addr, size) do { } while (0) @@ -610,7 +659,78 @@ static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp, return page_address(page); } +static void *simple_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_simple_buffer(args->dev, args->size, args->gfp, + ret_page); +} + +static void simple_allocator_free(struct arm_dma_free_args *args) +{ + __dma_free_buffer(args->page, args->size); +} +static struct arm_dma_allocator simple_allocator = { + .alloc = simple_allocator_alloc, + .free = simple_allocator_free, +}; + +static void *cma_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_from_contiguous(args->dev, args->size, args->prot, + ret_page, args->caller, + args->want_vaddr); +} + +static void cma_allocator_free(struct arm_dma_free_args *args) +{ + __free_from_contiguous(args->dev, args->page, args->cpu_addr, + args->size, args->want_vaddr); +} + +static struct arm_dma_allocator cma_allocator = { + .alloc = cma_allocator_alloc, + .free = cma_allocator_free, +}; + +static void *pool_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_from_pool(args->size, ret_page); +} + +static void pool_allocator_free(struct arm_dma_free_args *args) +{ + __free_from_pool(args->cpu_addr, args->size); +} + +static struct arm_dma_allocator pool_allocator = { + .alloc = pool_allocator_alloc, + .free = pool_allocator_free, +}; + +static void *remap_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_remap_buffer(args->dev, args->size, args->gfp, + args->prot, ret_page, args->caller, + args->want_vaddr); +} + +static void remap_allocator_free(struct arm_dma_free_args *args) +{ + if (args->want_vaddr) + __dma_free_remap(args->cpu_addr, args->size); + + __dma_free_buffer(args->page, args->size); +} + +static struct arm_dma_allocator remap_allocator = { + .alloc = remap_allocator_alloc, + .free = remap_allocator_free, +}; static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, @@ -619,7 +739,16 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, u64 mask = get_coherent_dma_mask(dev); struct page *page = NULL; void *addr; - bool want_vaddr; + bool allowblock, cma; + struct arm_dma_buffer *buf; + struct arm_dma_alloc_args args = { + .dev = dev, + .size = PAGE_ALIGN(size), + .gfp = gfp, + .prot = prot, + .caller = caller, + .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs), + }; #ifdef CONFIG_DMA_API_DEBUG u64 limit = (mask + 1) & ~mask; @@ -633,6 +762,10 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (!mask) return NULL; + buf = kzalloc(sizeof(*buf), gfp); + if (!buf) + return NULL; + if (mask < 0xffffffffULL) gfp |= GFP_DMA; @@ -644,28 +777,37 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, * platform; see CONFIG_HUGETLBFS. */ gfp &= ~(__GFP_COMP); + args.gfp = gfp; *handle = DMA_ERROR_CODE; - size = PAGE_ALIGN(size); - want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs); - - if (nommu()) - addr = __alloc_simple_buffer(dev, size, gfp, &page); - else if (dev_get_cma_area(dev) && (gfp & __GFP_DIRECT_RECLAIM)) - addr = __alloc_from_contiguous(dev, size, prot, &page, - caller, want_vaddr); - else if (is_coherent) - addr = __alloc_simple_buffer(dev, size, gfp, &page); - else if (!gfpflags_allow_blocking(gfp)) - addr = __alloc_from_pool(size, &page); + allowblock = gfpflags_allow_blocking(gfp); + cma = allowblock ? dev_get_cma_area(dev) : false; + + if (cma) + buf->allocator = &cma_allocator; + else if (nommu() || is_coherent) + buf->allocator = &simple_allocator; + else if (allowblock) + buf->allocator = &remap_allocator; else - addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, - caller, want_vaddr); + buf->allocator = &pool_allocator; + + addr = buf->allocator->alloc(&args, &page); + + if (page) { + unsigned long flags; - if (page) *handle = pfn_to_dma(dev, page_to_pfn(page)); + buf->virt = args.want_vaddr ? addr : page; + + spin_lock_irqsave(&arm_dma_bufs_lock, flags); + list_add(&buf->list, &arm_dma_bufs); + spin_unlock_irqrestore(&arm_dma_bufs_lock, flags); + } else { + kfree(buf); + } - return want_vaddr ? addr : page; + return args.want_vaddr ? addr : page; } /* @@ -741,25 +883,21 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, bool is_coherent) { struct page *page = pfn_to_page(dma_to_pfn(dev, handle)); - bool want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs); - - size = PAGE_ALIGN(size); - - if (nommu()) { - __dma_free_buffer(page, size); - } else if (!is_coherent && __free_from_pool(cpu_addr, size)) { + struct arm_dma_buffer *buf; + struct arm_dma_free_args args = { + .dev = dev, + .size = PAGE_ALIGN(size), + .cpu_addr = cpu_addr, + .page = page, + .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs), + }; + + buf = arm_dma_buffer_find(cpu_addr); + if (WARN(!buf, "Freeing invalid buffer %p\n", cpu_addr)) return; - } else if (!dev_get_cma_area(dev)) { - if (want_vaddr && !is_coherent) - __dma_free_remap(cpu_addr, size); - __dma_free_buffer(page, size); - } else { - /* - * Non-atomic allocations cannot be freed with IRQs disabled - */ - WARN_ON(irqs_disabled()); - __free_from_contiguous(dev, page, cpu_addr, size, want_vaddr); - } + + buf->allocator->free(&args); + kfree(buf); } void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, @@ -1122,6 +1260,9 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping, spin_unlock_irqrestore(&mapping->lock, flags); } +/* We'll try 2M, 1M, 64K, and finally 4K; array must end with 0! */ +static const int iommu_order_array[] = { 9, 8, 4, 0 }; + static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t gfp, struct dma_attrs *attrs) { @@ -1129,6 +1270,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, int count = size >> PAGE_SHIFT; int array_size = count * sizeof(struct page *); int i = 0; + int order_idx = 0; if (array_size <= PAGE_SIZE) pages = kzalloc(array_size, GFP_KERNEL); @@ -1154,6 +1296,10 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, return pages; } + /* Go straight to 4K chunks if caller says it's OK. */ + if (dma_get_attr(DMA_ATTR_ALLOC_SINGLE_PAGES, attrs)) + order_idx = ARRAY_SIZE(iommu_order_array) - 1; + /* * IOMMU can map any pages, so himem can also be used here */ @@ -1162,22 +1308,24 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, while (count) { int j, order; - for (order = __fls(count); order > 0; --order) { - /* - * We do not want OOM killer to be invoked as long - * as we can fall back to single pages, so we force - * __GFP_NORETRY for orders higher than zero. - */ - pages[i] = alloc_pages(gfp | __GFP_NORETRY, order); - if (pages[i]) - break; + order = iommu_order_array[order_idx]; + + /* Drop down when we get small */ + if (__fls(count) < order) { + order_idx++; + continue; } - if (!pages[i]) { - /* - * Fall back to single page allocation. - * Might invoke OOM killer as last resort. - */ + if (order) { + /* See if it's easy to allocate a high-order chunk */ + pages[i] = alloc_pages(gfp | __GFP_NORETRY, order); + + /* Go down a notch at first sign of pressure */ + if (!pages[i]) { + order_idx++; + continue; + } + } else { pages[i] = alloc_pages(gfp, 0); if (!pages[i]) goto error; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index daafcf121ce0..ad5841856007 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -346,7 +346,7 @@ retry: up_read(&mm->mmap_sem); /* - * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR + * Handle the "normal" case first - VM_FAULT_MAJOR */ if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS)))) return 0; diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index d65909697165..bd274a05b8ff 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -15,7 +15,7 @@ * page tables. */ pgd_t *idmap_pgd; -phys_addr_t (*arch_virt_to_idmap) (unsigned long x); +unsigned long (*arch_virt_to_idmap)(unsigned long x); #ifdef CONFIG_ARM_LPAE static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 49bd08178008..370581aeb871 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -572,8 +572,9 @@ void __init mem_init(void) } } -#ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA struct section_perm { + const char *name; unsigned long start; unsigned long end; pmdval_t mask; @@ -581,9 +582,13 @@ struct section_perm { pmdval_t clear; }; +/* First section-aligned location at or after __start_rodata. */ +extern char __start_rodata_section_aligned[]; + static struct section_perm nx_perms[] = { /* Make pages tables, etc before _stext RW (set NX). */ { + .name = "pre-text NX", .start = PAGE_OFFSET, .end = (unsigned long)_stext, .mask = ~PMD_SECT_XN, @@ -591,26 +596,26 @@ static struct section_perm nx_perms[] = { }, /* Make init RW (set NX). */ { + .name = "init NX", .start = (unsigned long)__init_begin, .end = (unsigned long)_sdata, .mask = ~PMD_SECT_XN, .prot = PMD_SECT_XN, }, -#ifdef CONFIG_DEBUG_RODATA /* Make rodata NX (set RO in ro_perms below). */ { - .start = (unsigned long)__start_rodata, + .name = "rodata NX", + .start = (unsigned long)__start_rodata_section_aligned, .end = (unsigned long)__init_begin, .mask = ~PMD_SECT_XN, .prot = PMD_SECT_XN, }, -#endif }; -#ifdef CONFIG_DEBUG_RODATA static struct section_perm ro_perms[] = { /* Make kernel code and rodata RX (set RO). */ { + .name = "text/rodata RO", .start = (unsigned long)_stext, .end = (unsigned long)__init_begin, #ifdef CONFIG_ARM_LPAE @@ -623,7 +628,6 @@ static struct section_perm ro_perms[] = { #endif }, }; -#endif /* * Updates section permissions only for the current mm (sections are @@ -670,8 +674,8 @@ void set_section_perms(struct section_perm *perms, int n, bool set, for (i = 0; i < n; i++) { if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) || !IS_ALIGNED(perms[i].end, SECTION_SIZE)) { - pr_err("BUG: section %lx-%lx not aligned to %lx\n", - perms[i].start, perms[i].end, + pr_err("BUG: %s section %lx-%lx not aligned to %lx\n", + perms[i].name, perms[i].start, perms[i].end, SECTION_SIZE); continue; } @@ -712,7 +716,6 @@ void fix_kernmem_perms(void) stop_machine(__fix_kernmem_perms, NULL, NULL); } -#ifdef CONFIG_DEBUG_RODATA int __mark_rodata_ro(void *unused) { update_sections_early(ro_perms, ARRAY_SIZE(ro_perms)); @@ -735,11 +738,10 @@ void set_kernel_text_ro(void) set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true, current->active_mm); } -#endif /* CONFIG_DEBUG_RODATA */ #else static inline void fix_kernmem_perms(void) { } -#endif /* CONFIG_ARM_KERNMEM_PERMS */ +#endif /* CONFIG_DEBUG_RODATA */ void free_tcmmem(void) { diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 4b4058db0781..66353caa35b9 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -173,7 +173,7 @@ unsigned long arch_mmap_rnd(void) { unsigned long rnd; - rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_bits) - 1); + rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1); return rnd << PAGE_SHIFT; } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 434d76f0b363..62f4d01941f7 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -732,7 +732,7 @@ static void *__init late_alloc(unsigned long sz) return ptr; } -static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr, +static pte_t * __init arm_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot, void *(*alloc)(unsigned long sz)) { @@ -747,7 +747,7 @@ static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr, static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) { - return pte_alloc(pmd, addr, prot, early_alloc); + return arm_pte_alloc(pmd, addr, prot, early_alloc); } static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, @@ -756,7 +756,7 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, void *(*alloc)(unsigned long sz), bool ng) { - pte_t *pte = pte_alloc(pmd, addr, type->prot_l1, alloc); + pte_t *pte = arm_pte_alloc(pmd, addr, type->prot_l1, alloc); do { set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), ng ? PTE_EXT_NG : 0); @@ -1253,7 +1253,7 @@ static inline void prepare_page_table(void) #ifdef CONFIG_XIP_KERNEL /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK; + addr = ((unsigned long)_exiprom + PMD_SIZE - 1) & PMD_MASK; #endif for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); @@ -1335,7 +1335,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc) #ifdef CONFIG_XIP_KERNEL map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); map.virtual = MODULES_VADDR; - map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; + map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK; map.type = MT_ROM; create_mapping(&map); #endif @@ -1426,7 +1426,11 @@ static void __init kmap_init(void) static void __init map_lowmem(void) { struct memblock_region *reg; +#ifdef CONFIG_XIP_KERNEL + phys_addr_t kernel_x_start = round_down(__pa(_sdata), SECTION_SIZE); +#else phys_addr_t kernel_x_start = round_down(__pa(_stext), SECTION_SIZE); +#endif phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE); /* Map all the lowmem memory banks. */ diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c index cf30daff8932..d19b1ad29b07 100644 --- a/arch/arm/mm/pageattr.c +++ b/arch/arm/mm/pageattr.c @@ -49,6 +49,9 @@ static int change_memory_common(unsigned long addr, int numpages, WARN_ON_ONCE(1); } + if (!numpages) + return 0; + if (start < MODULES_VADDR || start >= MODULES_END) return -EINVAL; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index e683db1b90a3..b8d477321730 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -80,7 +80,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm) if (!new_pmd) goto no_pmd; - new_pte = pte_alloc_map(mm, NULL, new_pmd, 0); + new_pte = pte_alloc_map(mm, new_pmd, 0); if (!new_pte) goto no_pte; diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0f92d575a304..0f8963a7e7d9 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -487,7 +487,7 @@ __errata_finish: .align 2 __v7_setup_stack_ptr: - .word __v7_setup_stack - . + .word PHYS_RELATIVE(__v7_setup_stack, .) ENDPROC(__v7_setup) .bss diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 7bd22d8e5b11..f74069386c13 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -154,8 +154,7 @@ err_out: */ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); if (orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK) || orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK)) @@ -166,8 +165,7 @@ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); unsigned long flags; if (!orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK)) @@ -182,8 +180,7 @@ static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) static int orion_gpio_get(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); int val; if (readl(GPIO_IO_CONF(ochip)) & (1 << pin)) { @@ -198,8 +195,7 @@ static int orion_gpio_get(struct gpio_chip *chip, unsigned pin) static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); unsigned long flags; if (!orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK)) @@ -216,8 +212,7 @@ orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value) static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); unsigned long flags; spin_lock_irqsave(&ochip->lock, flags); @@ -227,8 +222,7 @@ static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value) static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); return irq_create_mapping(ochip->domain, ochip->secondary_irq_base + pin); @@ -445,8 +439,8 @@ static void gpio_irq_handler(struct irq_desc *desc) static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk; int i; @@ -567,7 +561,7 @@ void __init orion_gpio_init(struct device_node *np, ochip->mask_offset = mask_offset; ochip->secondary_irq_base = secondary_irq_base; - gpiochip_add(&ochip->chip); + gpiochip_add_data(&ochip->chip, ochip); /* * Mask and clear GPIO interrupts. diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 04aff2c31b46..70f2f699bed3 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -53,8 +53,8 @@ static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) if (ptr->child != NULL) s3c_pm_run_res(ptr->child, fn, arg); - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { + if ((ptr->flags & IORESOURCE_SYSTEM_RAM) + == IORESOURCE_SYSTEM_RAM) { S3C_PMDBG("Found system RAM at %08lx..%08lx\n", (unsigned long)ptr->start, (unsigned long)ptr->end); diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 49b8ef91584a..98b9b8e9f698 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -1,8 +1,5 @@ if PLAT_VERSATILE -config PLAT_VERSATILE_CLOCK - bool - config PLAT_VERSATILE_SCHED_CLOCK bool diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 03c4900ac3f4..bff3ba889882 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,5 +1,4 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/clock.c b/arch/arm/plat-versatile/clock.c deleted file mode 100644 index 5c8b6564fdc2..000000000000 --- a/arch/arm/plat-versatile/clock.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/arm/plat-versatile/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/hardware/icst.h> - -#include <mach/clkdev.h> - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - long ret = -EIO; - if (clk->ops && clk->ops->round) - ret = clk->ops->round(clk, rate); - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - if (clk->ops && clk->ops->set) - ret = clk->ops->set(clk, rate); - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -long icst_clk_round(struct clk *clk, unsigned long rate) -{ - struct icst_vco vco; - vco = icst_hz_to_vco(clk->params, rate); - return icst_hz(clk->params, vco); -} -EXPORT_SYMBOL(icst_clk_round); - -int icst_clk_set(struct clk *clk, unsigned long rate) -{ - struct icst_vco vco; - - vco = icst_hz_to_vco(clk->params, rate); - clk->rate = icst_hz(clk->params, vco); - clk->ops->setvco(clk, vco); - - return 0; -} -EXPORT_SYMBOL(icst_clk_set); diff --git a/arch/arm/vdso/vdso.S b/arch/arm/vdso/vdso.S index b2b97e3e7bab..a62a7b64f49c 100644 --- a/arch/arm/vdso/vdso.S +++ b/arch/arm/vdso/vdso.S @@ -23,9 +23,8 @@ #include <linux/const.h> #include <asm/page.h> - __PAGE_ALIGNED_DATA - .globl vdso_start, vdso_end + .section .data..ro_after_init .balign PAGE_SIZE vdso_start: .incbin "arch/arm/vdso/vdso.so" |
