diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/Kconfig | 6 | ||||
-rw-r--r-- | arch/arm/boot/compressed/head-xscale.S | 7 | ||||
-rw-r--r-- | arch/arm/configs/badge4_defconfig | 29 | ||||
-rw-r--r-- | arch/arm/configs/h3600_defconfig | 24 | ||||
-rw-r--r-- | arch/arm/configs/hackkit_defconfig | 22 | ||||
-rw-r--r-- | arch/arm/kernel/entry-armv.S | 16 | ||||
-rw-r--r-- | arch/arm/kernel/traps.c | 49 | ||||
-rw-r--r-- | arch/arm/lib/io-writesw-armv4.S | 6 | ||||
-rw-r--r-- | arch/arm/mach-integrator/integrator_cp.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-pxa/lubbock.c | 30 | ||||
-rw-r--r-- | arch/arm/mach-pxa/mainstone.c | 40 | ||||
-rw-r--r-- | arch/arm/mach-pxa/pm.c | 32 | ||||
-rw-r--r-- | arch/arm/mach-pxa/pxa25x.c | 33 | ||||
-rw-r--r-- | arch/arm/mach-pxa/pxa27x.c | 36 | ||||
-rw-r--r-- | arch/arm/mach-s3c2410/dma.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-sa1100/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/mach-versatile/core.c | 2 | ||||
-rw-r--r-- | arch/arm/mm/Kconfig | 15 | ||||
-rw-r--r-- | arch/arm/mm/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mm/copypage-xscale.S | 113 | ||||
-rw-r--r-- | arch/arm/mm/copypage-xscale.c | 131 | ||||
-rw-r--r-- | arch/arm/mm/minicache.c | 73 |
22 files changed, 420 insertions, 253 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bf397a9f8ac2..475950c8a831 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -497,7 +497,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB) + depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) default y config CPU_FREQ_SA1110 @@ -689,7 +689,9 @@ source "drivers/block/Kconfig" source "drivers/acorn/block/Kconfig" -if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE +if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ + || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE source "drivers/ide/Kconfig" endif diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 665bd2c20743..d3fe2533907e 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -47,3 +47,10 @@ __XScale_start: orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) #endif +#ifdef CONFIG_ARCH_IXP2000 + mov r1, #-1 + mov r0, #0xd6000000 + str r1, [r0, #0x14] + str r1, [r0, #0x18] +#endif + diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 2b4059d2f8e4..5d92af975d87 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sat Mar 26 21:32:26 2005 +# Linux kernel version: 2.6.12-rc6-git3 +# Thu Jun 9 19:00:50 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -34,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y CONFIG_CPU_CACHE_V4WB=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -122,6 +124,7 @@ CONFIG_FORCE_MAX_ZONEORDER=9 # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -131,6 +134,7 @@ CONFIG_ISA=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y # CONFIG_LEDS is not set @@ -152,12 +156,14 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -294,7 +300,6 @@ CONFIG_PARPORT_NOT_PC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set @@ -428,7 +433,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -526,6 +530,7 @@ CONFIG_IRDA_ULTRA=y # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set CONFIG_SA1100_FIR=y +# CONFIG_VIA_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m # CONFIG_BT_SCO is not set @@ -618,7 +623,6 @@ CONFIG_NET_WIRELESS=y # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -687,7 +691,6 @@ CONFIG_RTC=m # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -736,6 +739,7 @@ CONFIG_I2C_ELEKTOR=m # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -747,6 +751,7 @@ CONFIG_I2C_ELEKTOR=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -871,7 +876,6 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set @@ -954,9 +958,11 @@ CONFIG_USB_USS720=m # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -985,6 +991,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index b4e297dd54b2..b9de07de80fe 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Mon Mar 28 00:02:26 2005 +# Linux kernel version: 2.6.12-rc4 +# Thu Jun 9 01:59:03 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -33,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -120,6 +123,7 @@ CONFIG_CPU_MINICACHE=y # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -138,6 +142,7 @@ CONFIG_PCMCIA_SA1100=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y # CONFIG_LEDS is not set @@ -159,12 +164,13 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -298,7 +304,6 @@ CONFIG_MTD_SA1100=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m @@ -379,7 +384,6 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -476,6 +480,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set CONFIG_SA1100_FIR=m +# CONFIG_VIA_FIR is not set # CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set @@ -647,7 +652,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -676,9 +680,11 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_SA1100=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index 6987c8c5ddb4..fb41a36a5a68 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Mon Mar 28 00:22:34 2005 +# Linux kernel version: 2.6.12-rc6-git3 +# Thu Jun 9 20:58:58 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -34,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y CONFIG_CPU_CACHE_V4WB=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -119,6 +121,7 @@ CONFIG_CPU_MINICACHE=y # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -128,6 +131,7 @@ CONFIG_ISA=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y CONFIG_LEDS=y @@ -151,12 +155,14 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -280,7 +286,6 @@ CONFIG_MTD_CFI_UTIL=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set @@ -338,7 +343,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -484,7 +488,6 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -533,7 +536,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 4eb36155dc93..e14278d59882 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -269,7 +269,7 @@ __pabt_svc: add r5, sp, #S_PC ldmia r7, {r2 - r4} @ Get USR pc, cpsr -#if __LINUX_ARM_ARCH__ < 6 +#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) @ make sure our user space atomic helper is aborted cmp r2, #VIRT_OFFSET bichs r3, r3, #PSR_Z_BIT @@ -616,11 +616,17 @@ __kuser_helper_start: __kuser_cmpxchg: @ 0xffff0fc0 -#if __LINUX_ARM_ARCH__ < 6 +#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) -#ifdef CONFIG_SMP /* sanity check */ -#error "CONFIG_SMP on a machine supporting pre-ARMv6 processors?" -#endif + /* + * Poor you. No fast solution possible... + * The kernel itself must perform the operation. + * A special ghost syscall is used for that (see traps.c). + */ + swi #0x9ffff0 + mov pc, lr + +#elif __LINUX_ARM_ARCH__ < 6 /* * Theory of operation: diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 14df16b983f4..45d2a032d890 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -464,6 +464,55 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) #endif return 0; +#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG + /* + * Atomically store r1 in *r2 if *r2 is equal to r0 for user space. + * Return zero in r0 if *MEM was changed or non-zero if no exchange + * happened. Also set the user C flag accordingly. + * If access permissions have to be fixed up then non-zero is + * returned and the operation has to be re-attempted. + * + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ + case 0xfff0: + { + extern void do_DataAbort(unsigned long addr, unsigned int fsr, + struct pt_regs *regs); + unsigned long val; + unsigned long addr = regs->ARM_r2; + struct mm_struct *mm = current->mm; + pgd_t *pgd; pmd_t *pmd; pte_t *pte; + + regs->ARM_cpsr &= ~PSR_C_BIT; + spin_lock(&mm->page_table_lock); + pgd = pgd_offset(mm, addr); + if (!pgd_present(*pgd)) + goto bad_access; + pmd = pmd_offset(pgd, addr); + if (!pmd_present(*pmd)) + goto bad_access; + pte = pte_offset_map(pmd, addr); + if (!pte_present(*pte) || !pte_write(*pte)) + goto bad_access; + val = *(unsigned long *)addr; + val -= regs->ARM_r0; + if (val == 0) { + *(unsigned long *)addr = regs->ARM_r1; + regs->ARM_cpsr |= PSR_C_BIT; + } + spin_unlock(&mm->page_table_lock); + return val; + + bad_access: + spin_unlock(&mm->page_table_lock); + /* simulate a read access fault */ + do_DataAbort(addr, 15 + (1 << 11), regs); + return -1; + } +#endif + default: /* Calls 9f00xx..9f07ff are defined to return -ENOSYS if not implemented, rather than raising SIGILL. This diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index 6d1d7c27806e..5e240e452af6 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -87,9 +87,9 @@ ENTRY(__raw_writesw) subs r2, r2, #2 orr ip, ip, r3, push_hbyte1 strh ip, [r0] - bpl 2b + bpl 1b -3: tst r2, #1 -2: movne ip, r3, lsr #8 + tst r2, #1 +3: movne ip, r3, lsr #8 strneh ip, [r0] mov pc, lr diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 3b948e8c2751..e0a01eef0993 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -83,7 +83,6 @@ static struct map_desc intcp_io_desc[] __initdata = { { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE }, - { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE }, { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE }, { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE }, }; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index dd012d6e2f5c..f2c9e0d2b24b 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/sysdev.h> #include <linux/major.h> #include <linux/fb.h> #include <linux/interrupt.h> @@ -106,6 +107,35 @@ static void __init lubbock_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int lubbock_irq_resume(struct sys_device *dev) +{ + LUB_IRQ_MASK_EN = lubbock_irq_enabled; + return 0; +} + +static struct sysdev_class lubbock_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = lubbock_irq_resume, +}; + +static struct sys_device lubbock_irq_device = { + .cls = &lubbock_irq_sysclass, +}; + +static int __init lubbock_irq_device_init(void) +{ + int ret = sysdev_class_register(&lubbock_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lubbock_irq_device); + return ret; +} + +device_initcall(lubbock_irq_device_init); + +#endif + static int lubbock_udc_is_connected(void) { return (LUB_MISC_RD & (1 << 9)) == 0; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 3f952237ae3d..9896afca751f 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/device.h> +#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -62,7 +63,6 @@ static struct irqchip mainstone_irq_chip = { .unmask = mainstone_unmask_irq, }; - static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { @@ -100,6 +100,35 @@ static void __init mainstone_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int mainstone_irq_resume(struct sys_device *dev) +{ + MST_INTMSKENA = mainstone_irq_enabled; + return 0; +} + +static struct sysdev_class mainstone_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = mainstone_irq_resume, +}; + +static struct sys_device mainstone_irq_device = { + .cls = &mainstone_irq_sysclass, +}; + +static int __init mainstone_irq_device_init(void) +{ + int ret = sysdev_class_register(&mainstone_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&mainstone_irq_device); + return ret; +} + +device_initcall(mainstone_irq_device_init); + +#endif + static struct resource smc91x_resources[] = { [0] = { @@ -304,6 +333,15 @@ static void __init mainstone_map_io(void) PWER = 0xC0000002; PRER = 0x00000002; PFER = 0x00000002; + /* for use I SRAM as framebuffer. */ + PSLR |= 0xF04; + PCFR = 0x66; + /* For Keypad wakeup. */ + KPC &=~KPC_ASACT; + KPC |=KPC_AS; + PKWR = 0x000FD000; + /* Need read PKWR back after set it. */ + PKWR; } MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 82a4bf34c251..9799fe80df23 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -29,9 +29,6 @@ */ #undef DEBUG -extern void pxa_cpu_suspend(void); -extern void pxa_cpu_resume(void); - #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] @@ -63,6 +60,12 @@ enum { SLEEP_SAVE_START = 0, SLEEP_SAVE_ICMR, SLEEP_SAVE_CKEN, +#ifdef CONFIG_PXA27x + SLEEP_SAVE_MDREFR, + SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, + SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, +#endif + SLEEP_SAVE_CKSUM, SLEEP_SAVE_SIZE @@ -75,9 +78,7 @@ static int pxa_pm_enter(suspend_state_t state) unsigned long checksum = 0; struct timespec delta, rtc; int i; - - if (state != PM_SUSPEND_MEM) - return -EINVAL; + extern void pxa_cpu_pm_enter(suspend_state_t state); #ifdef CONFIG_IWMMXT /* force any iWMMXt context to ram **/ @@ -100,16 +101,17 @@ static int pxa_pm_enter(suspend_state_t state) SAVE(GAFR2_L); SAVE(GAFR2_U); #ifdef CONFIG_PXA27x + SAVE(MDREFR); SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3); SAVE(GAFR3_L); SAVE(GAFR3_U); + SAVE(PWER); SAVE(PCFR); SAVE(PRER); + SAVE(PFER); SAVE(PKWR); #endif SAVE(ICMR); ICMR = 0; SAVE(CKEN); - CKEN = 0; - SAVE(PSTR); /* Note: wake up source are set up in each machine specific files */ @@ -123,16 +125,13 @@ static int pxa_pm_enter(suspend_state_t state) /* Clear sleep reset status */ RCSR = RCSR_SMR; - /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); - /* before sleeping, calculate and save a checksum */ for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) checksum += sleep_save[i]; sleep_save[SLEEP_SAVE_CKSUM] = checksum; /* *** go zzz *** */ - pxa_cpu_suspend(); + pxa_cpu_pm_enter(state); /* after sleeping, validate the checksum */ checksum = 0; @@ -145,7 +144,7 @@ static int pxa_pm_enter(suspend_state_t state) LUB_HEXLED = 0xbadbadc5; #endif while (1) - pxa_cpu_suspend(); + pxa_cpu_pm_enter(state); } /* ensure not to come back here if it wasn't intended */ @@ -162,8 +161,11 @@ static int pxa_pm_enter(suspend_state_t state) RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); #ifdef CONFIG_PXA27x + RESTORE(MDREFR); RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3); RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); + RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); + RESTORE(PFER); RESTORE(PKWR); #endif PSSR = PSSR_RDH | PSSR_PH; @@ -197,7 +199,9 @@ unsigned long sleep_phys_sp(void *sp) */ static int pxa_pm_prepare(suspend_state_t state) { - return 0; + extern int pxa_cpu_pm_prepare(suspend_state_t state); + + return pxa_cpu_pm_prepare(state); } /* diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index e887b7175ef3..7869c3b4e62f 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -102,3 +103,35 @@ unsigned int get_lcdclk_frequency_10khz(void) } EXPORT_SYMBOL(get_lcdclk_frequency_10khz); + +#ifdef CONFIG_PM + +int pxa_cpu_pm_prepare(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + break; + default: + return -EINVAL; + } + + return 0; +} + +void pxa_cpu_pm_enter(suspend_state_t state) +{ + extern void pxa_cpu_suspend(unsigned int); + extern void pxa_cpu_resume(void); + + CKEN = 0; + + switch (state) { + case PM_SUSPEND_MEM: + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + pxa_cpu_suspend(3); + break; + } +} + +#endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 7e863afefb53..893964fb9659 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -120,6 +120,42 @@ EXPORT_SYMBOL(get_clk_frequency_khz); EXPORT_SYMBOL(get_memclk_frequency_10khz); EXPORT_SYMBOL(get_lcdclk_frequency_10khz); +#ifdef CONFIG_PM + +int pxa_cpu_pm_prepare(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + return 0; + default: + return -EINVAL; + } +} + +void pxa_cpu_pm_enter(suspend_state_t state) +{ + extern void pxa_cpu_standby(void); + extern void pxa_cpu_suspend(unsigned int); + extern void pxa_cpu_resume(void); + + CKEN = CKEN22_MEMC | CKEN9_OSTIMER; + + /* ensure voltage-change sequencer not initiated, which hangs */ + PCFR &= ~PCFR_FVC; + + /* Clear edge-detect status register. */ + PEDR = 0xDF12FE1B; + + switch (state) { + case PM_SUSPEND_MEM: + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + pxa_cpu_suspend(3); + break; + } +} + +#endif /* * device registration specific to PXA27x. diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index bc229fab86d4..c7c28890d406 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -785,6 +785,10 @@ int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client) chan->client = NULL; chan->in_use = 0; + if (chan->irq_claimed) + free_irq(chan->irq, (void *)chan); + chan->irq_claimed = 0; + local_irq_restore(flags); return 0; diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 50cde576dadf..6923316b3d0d 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -150,7 +150,7 @@ config SA1100_SSP config H3600_SLEEVE tristate "Compaq iPAQ Handheld sleeve support" - depends on SA1100_H3600 + depends on SA1100_H3100 || SA1100_H3600 help Choose this option to enable support for extension packs (sleeves) for the Compaq iPAQ H3XXX series of handheld computers. This option diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 554e1bd30d6e..302c2a7b9b63 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -543,7 +543,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) val |= SYS_CLCD_MODE_5551; break; case 6: - val |= SYS_CLCD_MODE_565_BLSB; + val |= SYS_CLCD_MODE_565_RLSB; break; case 8: val |= SYS_CLCD_MODE_888; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 48bac7da8c70..3fefb43c67f7 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -228,7 +228,6 @@ config CPU_SA1100 select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_TLB_V4WB - select CPU_MINICACHE # XScale config CPU_XSCALE @@ -239,7 +238,6 @@ config CPU_XSCALE select CPU_ABRT_EV5T select CPU_CACHE_VIVT select CPU_TLB_V4WBI - select CPU_MINICACHE # ARMv6 config CPU_V6 @@ -345,11 +343,6 @@ config CPU_TLB_V4WBI config CPU_TLB_V6 bool -config CPU_MINICACHE - bool - help - Processor has a minicache. - comment "Processor Features" config ARM_THUMB @@ -429,3 +422,11 @@ config HAS_TLS_REG assume directly accessing that register and always obtain the expected value only on ARMv7 and above. +config NEEDS_SYSCALL_FOR_CMPXCHG + bool + default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3) + help + SMP on a pre-ARMv6 processor? Well OK then. + Forget about fast user space cmpxchg support. + It is just not possible. + diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index ccf316c11e02..59f47d4c2dfe 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -31,8 +31,6 @@ obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o -obj-$(CONFIG_CPU_MINICACHE) += minicache.o - obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o diff --git a/arch/arm/mm/copypage-xscale.S b/arch/arm/mm/copypage-xscale.S deleted file mode 100644 index bb277316ef52..000000000000 --- a/arch/arm/mm/copypage-xscale.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * linux/arch/arm/lib/copypage-xscale.S - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/constants.h> - -/* - * General note: - * We don't really want write-allocate cache behaviour for these functions - * since that will just eat through 8K of the cache. - */ - - .text - .align 5 -/* - * XScale optimised copy_user_page - * r0 = destination - * r1 = source - * r2 = virtual user address of ultimate destination page - * - * The source page may have some clean entries in the cache already, but we - * can safely ignore them - break_cow() will flush them out of the cache - * if we eventually end up using our copied page. - * - * What we could do is use the mini-cache to buffer reads from the source - * page. We rely on the mini-cache being smaller than one page, so we'll - * cycle through the complete cache anyway. - */ -ENTRY(xscale_mc_copy_user_page) - stmfd sp!, {r4, r5, lr} - mov r5, r0 - mov r0, r1 - bl map_page_minicache - mov r1, r5 - mov lr, #PAGE_SZ/64-1 - - /* - * Strangely enough, best performance is achieved - * when prefetching destination as well. (NP) - */ - pld [r0, #0] - pld [r0, #32] - pld [r1, #0] - pld [r1, #32] - -1: pld [r0, #64] - pld [r0, #96] - pld [r1, #64] - pld [r1, #96] - -2: ldrd r2, [r0], #8 - ldrd r4, [r0], #8 - mov ip, r1 - strd r2, [r1], #8 - ldrd r2, [r0], #8 - strd r4, [r1], #8 - ldrd r4, [r0], #8 - strd r2, [r1], #8 - strd r4, [r1], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - ldrd r2, [r0], #8 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - ldrd r4, [r0], #8 - mov ip, r1 - strd r2, [r1], #8 - ldrd r2, [r0], #8 - strd r4, [r1], #8 - ldrd r4, [r0], #8 - strd r2, [r1], #8 - strd r4, [r1], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - subs lr, lr, #1 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - bgt 1b - beq 2b - - ldmfd sp!, {r4, r5, pc} - - .align 5 -/* - * XScale optimised clear_user_page - * r0 = destination - * r1 = virtual user address of ultimate destination page - */ -ENTRY(xscale_mc_clear_user_page) - mov r1, #PAGE_SZ/32 - mov r2, #0 - mov r3, #0 -1: mov ip, r0 - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - subs r1, r1, #1 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - bne 1b - mov pc, lr - - __INITDATA - - .type xscale_mc_user_fns, #object -ENTRY(xscale_mc_user_fns) - .long xscale_mc_clear_user_page - .long xscale_mc_copy_user_page - .size xscale_mc_user_fns, . - xscale_mc_user_fns diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c new file mode 100644 index 000000000000..42a6ee255ce0 --- /dev/null +++ b/arch/arm/mm/copypage-xscale.c @@ -0,0 +1,131 @@ +/* + * linux/arch/arm/lib/copypage-xscale.S + * + * Copyright (C) 1995-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This handles the mini data cache, as found on SA11x0 and XScale + * processors. When we copy a user page page, we map it in such a way + * that accesses to this page will not touch the main data cache, but + * will be cached in the mini data cache. This prevents us thrashing + * the main data cache on page faults. + */ +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> + +/* + * 0xffff8000 to 0xffffffff is reserved for any ARM architecture + * specific hacks for copying pages efficiently. + */ +#define COPYPAGE_MINICACHE 0xffff8000 + +#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ + L_PTE_CACHEABLE) + +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) + +static DEFINE_SPINLOCK(minicache_lock); + +/* + * XScale mini-dcache optimised copy_user_page + * + * We flush the destination cache lines just before we write the data into the + * corresponding address. Since the Dcache is read-allocate, this removes the + * Dcache aliasing issue. The writes will be forwarded to the write buffer, + * and merged as appropriate. + */ +static void __attribute__((naked)) +mc_copy_user_page(void *from, void *to) +{ + /* + * Strangely enough, best performance is achieved + * when prefetching destination as well. (NP) + */ + asm volatile( + "stmfd sp!, {r4, r5, lr} \n\ + mov lr, %2 \n\ + pld [r0, #0] \n\ + pld [r0, #32] \n\ + pld [r1, #0] \n\ + pld [r1, #32] \n\ +1: pld [r0, #64] \n\ + pld [r0, #96] \n\ + pld [r1, #64] \n\ + pld [r1, #96] \n\ +2: ldrd r2, [r0], #8 \n\ + ldrd r4, [r0], #8 \n\ + mov ip, r1 \n\ + strd r2, [r1], #8 \n\ + ldrd r2, [r0], #8 \n\ + strd r4, [r1], #8 \n\ + ldrd r4, [r0], #8 \n\ + strd r2, [r1], #8 \n\ + strd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + ldrd r2, [r0], #8 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + ldrd r4, [r0], #8 \n\ + mov ip, r1 \n\ + strd r2, [r1], #8 \n\ + ldrd r2, [r0], #8 \n\ + strd r4, [r1], #8 \n\ + ldrd r4, [r0], #8 \n\ + strd r2, [r1], #8 \n\ + strd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + subs lr, lr, #1 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + bgt 1b \n\ + beq 2b \n\ + ldmfd sp!, {r4, r5, pc} " + : + : "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1)); +} + +void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) +{ + spin_lock(&minicache_lock); + + set_pte(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot)); + flush_tlb_kernel_page(COPYPAGE_MINICACHE); + + mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); + + spin_unlock(&minicache_lock); +} + +/* + * XScale optimised clear_user_page + */ +void __attribute__((naked)) +xscale_mc_clear_user_page(void *kaddr, unsigned long vaddr) +{ + asm volatile( + "mov r1, %0 \n\ + mov r2, #0 \n\ + mov r3, #0 \n\ +1: mov ip, r0 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + subs r1, r1, #1 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + bne 1b \n\ + mov pc, lr" + : + : "I" (PAGE_SIZE / 32)); +} + +struct cpu_user_fns xscale_mc_user_fns __initdata = { + .cpu_clear_user_page = xscale_mc_clear_user_page, + .cpu_copy_user_page = xscale_mc_copy_user_page, +}; diff --git a/arch/arm/mm/minicache.c b/arch/arm/mm/minicache.c deleted file mode 100644 index dedf2ab01b2a..000000000000 --- a/arch/arm/mm/minicache.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/arch/arm/mm/minicache.c - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This handles the mini data cache, as found on SA11x0 and XScale - * processors. When we copy a user page page, we map it in such a way - * that accesses to this page will not touch the main data cache, but - * will be cached in the mini data cache. This prevents us thrashing - * the main data cache on page faults. - */ -#include <linux/init.h> -#include <linux/mm.h> - -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/tlbflush.h> - -/* - * 0xffff8000 to 0xffffffff is reserved for any ARM architecture - * specific hacks for copying pages efficiently. - */ -#define minicache_address (0xffff8000) -#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ - L_PTE_CACHEABLE) - -static pte_t *minicache_pte; - -/* - * Note that this is intended to be called only from the copy_user_page - * asm code; anything else will require special locking to prevent the - * mini-cache space being re-used. (Note: probably preempt unsafe). - * - * We rely on the fact that the minicache is 2K, and we'll be pushing - * 4K of data through it, so we don't actually have to specifically - * flush the minicache when we change the mapping. - * - * Note also: assert(PAGE_OFFSET <= virt < high_memory). - * Unsafe: preempt, kmap. - */ -unsigned long map_page_minicache(unsigned long virt) -{ - set_pte(minicache_pte, pfn_pte(__pa(virt) >> PAGE_SHIFT, minicache_pgprot)); - flush_tlb_kernel_page(minicache_address); - - return minicache_address; -} - -static int __init minicache_init(void) -{ - pgd_t *pgd; - pmd_t *pmd; - - spin_lock(&init_mm.page_table_lock); - - pgd = pgd_offset_k(minicache_address); - pmd = pmd_alloc(&init_mm, pgd, minicache_address); - if (!pmd) - BUG(); - minicache_pte = pte_alloc_kernel(&init_mm, pmd, minicache_address); - if (!minicache_pte) - BUG(); - - spin_unlock(&init_mm.page_table_lock); - - return 0; -} - -core_initcall(minicache_init); |