diff options
Diffstat (limited to 'arch/arm')
70 files changed, 553 insertions, 772 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 40319d91bb7f..1683bfb9166f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_IMX_V4_V5) := imx machine-$(CONFIG_ARCH_IMX_V6_V7) := imx -machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index d0d8dfece37e..3a4fb2e5fc68 100644 --- a/arch/arm/configs/mx5_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CGROUPS=y CONFIG_RELAY=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set @@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX5=y -CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX31LILLY=y +CONFIG_MACH_MX31LITE=y +CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_MX35_3DS=y +CONFIG_MACH_EUKREA_CPUIMX35=y +CONFIG_MACH_VPR200=y +CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_MACH_MX51_EFIKAMX=y CONFIG_MACH_MX51_EFIKASB=y -CONFIG_MACH_MX53_EVK=y -CONFIG_MACH_MX53_SMD=y -CONFIG_MACH_MX53_LOCO=y -CONFIG_MACH_MX53_ARD=y +CONFIG_MACH_IMX53_DT=y +CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y @@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_MICREL_PHY=y -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +CONFIG_FEC=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMC91X=y +CONFIG_SMC911X=y +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_STORAGE=y CONFIG_MMC=y -CONFIG_MMC_BLOCK=m CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_MXC=y +CONFIG_DMADEVICES=y +CONFIG_IMX_SDMA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig deleted file mode 100644 index cb0717fbb03d..000000000000 --- a/arch/arm/configs/mx3_defconfig +++ /dev/null @@ -1,144 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MXC=y -CONFIG_MACH_MX31ADS_WM1133_EV1=y -CONFIG_MACH_MX31LILLY=y -CONFIG_MACH_MX31LITE=y -CONFIG_MACH_PCM037=y -CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31_3DS=y -CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_QONG=y -CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_KZM_ARM11_01=y -CONFIG_MACH_PCM043=y -CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_EUKREA_CPUIMX35=y -CONFIG_MXC_IRQ_PRIOR=y -CONFIG_MXC_PWM=y -CONFIG_ARM_ERRATA_411920=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -CONFIG_VFP=y -CONFIG_PM_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MXC=y -CONFIG_MTD_UBI=y -# CONFIG_BLK_DEV is not set -CONFIG_MISC_DEVICES=y -CONFIG_EEPROM_AT24=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -CONFIG_DNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_IMX=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -CONFIG_SPI=y -CONFIG_W1=y -CONFIG_W1_MASTER_MXC=y -CONFIG_W1_SLAVE_THERM=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_IMX2_WDT=y -CONFIG_MFD_WM8350_I2C=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_WM8350=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -# CONFIG_RC_CORE is not set -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_MT9M001=y -CONFIG_SOC_CAMERA_MT9M111=y -CONFIG_SOC_CAMERA_MT9T031=y -CONFIG_SOC_CAMERA_MT9V022=y -CONFIG_SOC_CAMERA_TW9910=y -CONFIG_SOC_CAMERA_OV772X=y -CONFIG_VIDEO_MX3=y -# CONFIG_RADIO_ADAPTERS is not set -CONFIG_FB=y -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_SOC=y -CONFIG_SND_IMX_SOC=y -CONFIG_SND_MXC_SOC_WM1133_EV1=y -CONFIG_SND_SOC_PHYCORE_AC97=y -CONFIG_SND_SOC_EUKREA_TLV320=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MXC=y -CONFIG_USB_GADGET=m -CONFIG_USB_FSL_USB2=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_ULPI=y -CONFIG_MMC=y -CONFIG_MMC_MXC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_MXC=y -CONFIG_DMADEVICES=y -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_UBIFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 4f991f295284..71feb00a1e99 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -18,6 +18,12 @@ config HAVE_AT91_USART4 config HAVE_AT91_USART5 bool +config AT91_SAM9_ALT_RESET + bool + +config AT91_SAM9G45_RESET + bool + menu "Atmel AT91 System-on-Chip" choice @@ -39,6 +45,7 @@ config ARCH_AT91SAM9260 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9261 bool "AT91SAM9261" @@ -46,6 +53,7 @@ config ARCH_AT91SAM9261 select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G10 bool "AT91SAM9G10" @@ -53,6 +61,7 @@ config ARCH_AT91SAM9G10 select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9263 bool "AT91SAM9263" @@ -61,6 +70,7 @@ config ARCH_AT91SAM9263 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9RL bool "AT91SAM9RL" @@ -69,6 +79,7 @@ config ARCH_AT91SAM9RL select HAVE_AT91_USART3 select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G20 bool "AT91SAM9G20" @@ -79,6 +90,7 @@ config ARCH_AT91SAM9G20 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G45 bool "AT91SAM9G45" @@ -88,6 +100,7 @@ config ARCH_AT91SAM9G45 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9G45_RESET config ARCH_AT91CAP9 bool "AT91CAP9" @@ -96,6 +109,7 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9G45_RESET config ARCH_AT91X40 bool "AT91x40" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 242174f9f355..705e1fbded39 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -8,15 +8,17 @@ obj-n := obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o +obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o +obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o # CPU-specific support obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o -obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o +obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index edb879ac04c8..a42edc25a87e 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -21,7 +21,6 @@ #include <mach/cpu.h> #include <mach/at91cap9.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> #include "soc.h" #include "generic.h" @@ -314,11 +313,6 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = { } }; -static void at91cap9_restart(char mode, const char *cmd) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ @@ -331,13 +325,14 @@ static void __init at91cap9_map_io(void) static void __init at91cap9_ioremap_registers(void) { at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); + at91_ioremap_rstc(AT91CAP9_BASE_RSTC); at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); } static void __init at91cap9_initialize(void) { - arm_pm_restart = at91cap9_restart; + arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); /* Register GPIO subsystem */ diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 5e46e4a96430..d4036ba43612 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -323,6 +323,7 @@ static void __init at91sam9260_map_io(void) static void __init at91sam9260_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index b85b9ea60170..023c2ff138df 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -281,6 +281,7 @@ static void __init at91sam9261_map_io(void) static void __init at91sam9261_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9261_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 79e3669b1117..75e876c258af 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -301,6 +301,7 @@ static void __init at91sam9263_map_io(void) static void __init at91sam9263_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9263_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index d3f931c5942e..518e42377171 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -23,7 +23,8 @@ .globl at91sam9_alt_restart at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants - ldr r1, .at91_va_base_rstc_cr + ldr r1, =at91_rstc_base + ldr r1, [r1] mov r2, #1 mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN @@ -33,11 +34,9 @@ at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants str r2, [r0, #AT91_SDRAMC_TR] @ disable SDRAM access str r3, [r0, #AT91_SDRAMC_LPR] @ power down SDRAM - str r4, [r1] @ reset processor + str r4, [r1, #AT91_RSTC_CR] @ reset processor b . .at91_va_base_sdramc: .word AT91_VA_BASE_SYS + AT91_SDRAMC0 -.at91_va_base_rstc_cr: - .word AT91_VA_BASE_SYS + AT91_RSTC_CR diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 7032dd32cdf0..1cb6a96b1c1e 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,7 +18,6 @@ #include <asm/mach/map.h> #include <mach/at91sam9g45.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> #include <mach/cpu.h> #include "soc.h" @@ -318,11 +317,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { } }; -static void at91sam9g45_restart(char mode, const char *cmd) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - /* -------------------------------------------------------------------- * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ @@ -336,6 +330,7 @@ static void __init at91sam9g45_map_io(void) static void __init at91sam9g45_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S new file mode 100644 index 000000000000..0468be10980b --- /dev/null +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -0,0 +1,40 @@ +/* + * reset AT91SAM9G45 as per errata + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com> + * + * unless the SDRAM is cleanly shutdown before we hit the + * reset register it can be left driving the data bus and + * killing the chance of a subsequent boot from NAND + * + * GPLv2 Only + */ + +#include <linux/linkage.h> +#include <mach/hardware.h> +#include <mach/at91sam9_ddrsdr.h> +#include <mach/at91_rstc.h> + + .arm + + .globl at91sam9g45_restart + +at91sam9g45_restart: + ldr r0, .at91_va_base_sdramc0 @ preload constants + ldr r1, =at91_rstc_base + ldr r1, [r1] + + mov r2, #1 + mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN + ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST + + .balign 32 @ align to cache line + + str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access + str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 + str r4, [r1, #AT91_RSTC_CR] @ reset processor + + b . + +.at91_va_base_sdramc0: + .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d6bcb1da11df..d2c91a841cb8 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -286,6 +286,7 @@ static void __init at91sam9rl_map_io(void) static void __init at91sam9rl_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 4866b8180d66..594133451c0c 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -58,7 +58,9 @@ extern void at91_irq_suspend(void); extern void at91_irq_resume(void); /* reset */ +extern void at91_ioremap_rstc(u32 base_addr); extern void at91sam9_alt_restart(char, const char *); +extern void at91sam9g45_restart(char, const char *); /* shutdown */ extern void at91_ioremap_shdwc(u32 base_addr); diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h index cbd2bf052c1f..875fa336800b 100644 --- a/arch/arm/mach-at91/include/mach/at91_rstc.h +++ b/arch/arm/mach-at91/include/mach/at91_rstc.h @@ -16,13 +16,25 @@ #ifndef AT91_RSTC_H #define AT91_RSTC_H -#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_rstc_base; + +#define at91_rstc_read(field) \ + __raw_readl(at91_rstc_base + field) + +#define at91_rstc_write(field, value) \ + __raw_writel(value, at91_rstc_base + field); +#else +.extern at91_rstc_base +#endif + +#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ #define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ #define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ #define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ #define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ -#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ +#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ #define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ #define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ #define AT91_RSTC_RSTTYP_GENERAL (0 << 8) @@ -33,7 +45,7 @@ #define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ #define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ -#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ +#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ #define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ #define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ #define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 4c0e2f6011d7..61d952902f2b 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -83,7 +83,6 @@ #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (cpu_is_at91cap9_revB() ? \ (0xfffffd50 - AT91_BASE_SYS) : \ (0xfffffd60 - AT91_BASE_SYS)) @@ -96,6 +95,7 @@ #define AT91CAP9_BASE_PIOB 0xfffff400 #define AT91CAP9_BASE_PIOC 0xfffff600 #define AT91CAP9_BASE_PIOD 0xfffff800 +#define AT91CAP9_BASE_RSTC 0xfffffd00 #define AT91CAP9_BASE_SHDWC 0xfffffd10 #define AT91CAP9_BASE_RTT 0xfffffd20 #define AT91CAP9_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h deleted file mode 100644 index 976f4a6c3353..000000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h - * - * (C) 2008 Andrew Victor - * - * DDR/SDR Controller (DDRSDRC) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_DDRSDR_H -#define AT91CAP9_DDRSDR_H - -#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ -#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ -#define AT91_DDRSDRC_MODE_NORMAL 0 -#define AT91_DDRSDRC_MODE_NOP 1 -#define AT91_DDRSDRC_MODE_PRECHARGE 2 -#define AT91_DDRSDRC_MODE_LMR 3 -#define AT91_DDRSDRC_MODE_REFRESH 4 -#define AT91_DDRSDRC_MODE_EXT_LMR 5 -#define AT91_DDRSDRC_MODE_DEEP 6 - -#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ -#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ -#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_DDRSDRC_NR_11 (0 << 2) -#define AT91_DDRSDRC_NR_12 (1 << 2) -#define AT91_DDRSDRC_NR_13 (2 << 2) -#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -#define AT91_DDRSDRC_CAS_2 (2 << 4) -#define AT91_DDRSDRC_CAS_3 (3 << 4) -#define AT91_DDRSDRC_CAS_25 (6 << 4) -#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ -#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ - -#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ -#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ - -#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ -#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ - -#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */ -#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_DDRSDRC_LPCB_DISABLE 0 -#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -#define AT91_DDRSDRC_MD_SDR 0 -#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91_DDRSDRC_MD_DDR 2 -#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 - -#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */ -#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ -#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ - -/* Register access macros */ -#define at91_ramc_read(num, reg) \ - at91_sys_read(AT91_DDRSDRC##num + reg) -#define at91_ramc_write(num, reg, value) \ - at91_sys_write(AT91_DDRSDRC##num + reg, value) - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index f937c476bb67..fa5ca278adeb 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -83,7 +83,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) #define AT91SAM9260_BASE_ECC 0xffffe800 @@ -92,6 +91,7 @@ #define AT91SAM9260_BASE_PIOA 0xfffff400 #define AT91SAM9260_BASE_PIOB 0xfffff600 #define AT91SAM9260_BASE_PIOC 0xfffff800 +#define AT91SAM9260_BASE_RSTC 0xfffffd00 #define AT91SAM9260_BASE_SHDWC 0xfffffd10 #define AT91SAM9260_BASE_RTT 0xfffffd20 #define AT91SAM9260_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 175604e261be..7cde2d36570e 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -68,7 +68,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) #define AT91SAM9261_BASE_SMC 0xffffec00 @@ -76,6 +75,7 @@ #define AT91SAM9261_BASE_PIOA 0xfffff400 #define AT91SAM9261_BASE_PIOB 0xfffff600 #define AT91SAM9261_BASE_PIOC 0xfffff800 +#define AT91SAM9261_BASE_RSTC 0xfffffd00 #define AT91SAM9261_BASE_SHDWC 0xfffffd10 #define AT91SAM9261_BASE_RTT 0xfffffd20 #define AT91SAM9261_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 80c915002d83..5949abda962b 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -78,7 +78,6 @@ #define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9263_BASE_ECC0 0xffffe000 @@ -91,6 +90,7 @@ #define AT91SAM9263_BASE_PIOC 0xfffff600 #define AT91SAM9263_BASE_PIOD 0xfffff800 #define AT91SAM9263_BASE_PIOE 0xfffffa00 +#define AT91SAM9263_BASE_RSTC 0xfffffd00 #define AT91SAM9263_BASE_SHDWC 0xfffffd10 #define AT91SAM9263_BASE_RTT0 0xfffffd20 #define AT91SAM9263_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h index d27b15ba8ebf..e2f8da8ce5bc 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -46,10 +46,10 @@ #define AT91_DDRSDRC_CAS_25 (6 << 4) #define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ #define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */ -#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */ -#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */ -#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */ +#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */ +#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */ +#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */ +#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */ #define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ #define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ @@ -59,7 +59,8 @@ #define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ #define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ #define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */ +#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ #define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ @@ -68,13 +69,14 @@ #define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ #define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ -#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */ +#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */ #define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ #define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ #define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ #define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ #define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ +#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -92,32 +94,40 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ +#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91CAP9_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_MD_DDR2 6 +#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ #define AT91_DDRSDRC_DBW_32BITS (0 << 4) #define AT91_DDRSDRC_DBW_16BITS (1 << 4) #define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ +#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ +#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ +#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ #define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ +#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ +#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ -#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */ +#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ #define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ #define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ -#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */ +#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */ #define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ #define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ #define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ -#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */ +#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */ #define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ #define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index f0c23c960dec..dd9c95ea0862 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -90,7 +90,6 @@ #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9G45_BASE_ECC 0xffffe200 @@ -102,6 +101,7 @@ #define AT91SAM9G45_BASE_PIOC 0xfffff600 #define AT91SAM9G45_BASE_PIOD 0xfffff800 #define AT91SAM9G45_BASE_PIOE 0xfffffa00 +#define AT91SAM9G45_BASE_RSTC 0xfffffd00 #define AT91SAM9G45_BASE_SHDWC 0xfffffd10 #define AT91SAM9G45_BASE_RTT 0xfffffd20 #define AT91SAM9G45_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 2bb359e60b97..d7bead7118da 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -72,7 +72,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) @@ -84,6 +83,7 @@ #define AT91SAM9RL_BASE_PIOB 0xfffff600 #define AT91SAM9RL_BASE_PIOC 0xfffff800 #define AT91SAM9RL_BASE_PIOD 0xfffffa00 +#define AT91SAM9RL_BASE_RSTC 0xfffffd00 #define AT91SAM9RL_BASE_SHDWC 0xfffffd10 #define AT91SAM9RL_BASE_RTT 0xfffffd20 #define AT91SAM9RL_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index d0b377b21bd7..3b33f07b1e11 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -88,7 +88,7 @@ extern void __init at91_add_device_eth(struct macb_platform_data *data); struct at91_usbh_data { u8 ports; /* number of ports on root hub */ int vbus_pin[2]; /* port power-control pin */ - u8 vbus_pin_inverted; + u8 vbus_pin_active_low[2]; u8 overcurrent_supported; int overcurrent_pin[2]; u8 overcurrent_status[2]; diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 62ad95556c36..1606379ac284 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -34,7 +34,6 @@ /* * Show the reason for the previous system reset. */ -#if defined(AT91_RSTC) #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> @@ -58,10 +57,10 @@ static void __init show_reset_status(void) char *reason, *r2 = reset; u32 reset_type, wake_type; - if (!at91_shdwc_base) + if (!at91_shdwc_base || !at91_rstc_base) return; - reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; + reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; wake_type = at91_shdwc_read(AT91_SHDW_SR); switch (reset_type) { @@ -102,10 +101,6 @@ static void __init show_reset_status(void) } pr_info("AT91: Starting after %s %s\n", reason, r2); } -#else -static void __init show_reset_status(void) {} -#endif - static int at91_pm_valid_state(suspend_state_t state) { diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index ce9a20699111..7eb40d24242f 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -25,21 +25,21 @@ static inline u32 sdram_selfrefresh_enable(void) : : "r" (0)) #elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9_ddrsdr.h> +#include <mach/at91sam9_ddrsdr.h> static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR); + saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR); lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr) #define wait_for_interrupt_enable() cpu_do_idle() #elif defined(CONFIG_ARCH_AT91SAM9G45) diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index f7922a436172..92dfb8461392 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -18,9 +18,8 @@ #if defined(CONFIG_ARCH_AT91RM9200) #include <mach/at91rm9200_mc.h> -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9_ddrsdr.h> -#elif defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9_ddrsdr.h> #else #include <mach/at91sam9_sdramc.h> diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 8bdcc3cb6012..69d3fc4c46f3 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -29,9 +29,12 @@ EXPORT_SYMBOL(at91_soc_initdata); void __init at91rm9200_set_type(int type) { if (type == ARCH_REVISON_9200_PQFP) - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - else at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP; + else + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; + + pr_info("AT91: filled in soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); } void __init at91_init_irq_default(void) @@ -281,6 +284,15 @@ void __init at91_ioremap_shdwc(u32 base_addr) pm_power_off = at91sam9_poweroff; } +void __iomem *at91_rstc_base; + +void __init at91_ioremap_rstc(u32 base_addr) +{ + at91_rstc_base = ioremap(base_addr, 16); + if (!at91_rstc_base) + panic("Impossible to ioremap at91_rstc_base\n"); +} + void __init at91_initialize(unsigned long main_clock) { at91_boot_soc.ioremap_registers(); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0e6de366c648..4defb97bbfc8 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -22,6 +22,18 @@ config ARCH_MX25 config MACH_MX27 bool +config ARCH_MX5 + bool + +config ARCH_MX50 + bool + +config ARCH_MX51 + bool + +config ARCH_MX53 + bool + config SOC_IMX1 bool select ARCH_MX1 @@ -73,6 +85,31 @@ config SOC_IMX35 select MXC_AVIC select SMP_ON_UP if SMP +config SOC_IMX5 + select CPU_V7 + select MXC_TZIC + select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 + select ARCH_HAS_CPUFREQ + select ARCH_MX5 + bool + +config SOC_IMX50 + bool + select SOC_IMX5 + select ARCH_MX50 + +config SOC_IMX51 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX51 + +config SOC_IMX53 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX53 if ARCH_IMX_V4_V5 @@ -592,6 +629,207 @@ config MACH_VPR200 Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. +comment "i.MX5 platforms:" + +config MACH_MX50_RDP + bool "Support MX50 reference design platform" + depends on BROKEN + select SOC_IMX50 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX50 reference design platform (RDP) board. This + includes specific configurations for the board and its peripherals. + +comment "i.MX51 machines:" + +config MACH_IMX51_DT + bool "Support i.MX51 platforms from device tree" + select SOC_IMX51 + select USE_OF + select MACH_MX51_BABBAGE + help + Include support for Freescale i.MX51 based platforms + using the device tree for discovery + +config MACH_MX51_BABBAGE + bool "Support MX51 BABBAGE platforms" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX51 Babbage platform, also known as MX51EVK in + u-boot. This includes specific configurations for the board and its + peripherals. + +config MACH_MX51_3DS + bool "Support MX51PDK (3DS)" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD + help + Include support for MX51PDK (3DS) platform. This includes specific + configurations for the board and its peripherals. + +config MACH_EUKREA_CPUIMX51 + bool "Support Eukrea CPUIMX51 module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51 platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51 + default MACH_EUKREA_MBIMX51_BASEBOARD + +config MACH_EUKREA_MBIMX51_BASEBOARD + prompt "Eukrea MBIMX51 development board" + bool + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMX51 evaluation board. + +endchoice + +config MACH_EUKREA_CPUIMX51SD + bool "Support Eukrea CPUIMX51SD module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51SD platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51SD + default MACH_EUKREA_MBIMXSD51_BASEBOARD + +config MACH_EUKREA_MBIMXSD51_BASEBOARD + prompt "Eukrea MBIMXSD development board" + bool + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + +config MX51_EFIKA_COMMON + bool + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_PATA_IMX + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika MX nettop. This includes specific + configurations for the board and its peripherals. + +config MACH_MX51_EFIKASB + bool "Support MX51 Genesi Efika Smartbook" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika Smartbook. This includes specific + configurations for the board and its peripherals. + +comment "i.MX53 machines:" + +config MACH_IMX53_DT + bool "Support i.MX53 platforms from device tree" + select SOC_IMX53 + select USE_OF + select MACH_MX53_ARD + select MACH_MX53_EVK + select MACH_MX53_LOCO + select MACH_MX53_SMD + help + Include support for Freescale i.MX53 based platforms + using the device tree for discovery + +config MACH_MX53_EVK + bool "Support MX53 EVK platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER + help + Include support for MX53 EVK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_SMD + bool "Support MX53 SMD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + help + Include support for MX53 SMD platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_LOCO + bool "Support MX53 LOCO platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + select LEDS_GPIO_REGISTER + help + Include support for MX53 LOCO platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_ARD + bool "Support MX53 ARD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + help + Include support for MX53 ARD platform. This includes specific + configurations for the board and its peripherals. + comment "i.MX6 family:" config SOC_IMX6Q diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f5920c24f7d7..55db9c488f2b 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o + # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -75,3 +77,22 @@ obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o endif + +# i.MX5 based machines +obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o +obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o +obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o +obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o +obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o +obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o +obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o +obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o +obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o +obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o + +obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o +obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 5f4d06af4912..6dfdbcc83afd 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -22,6 +22,18 @@ zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 +zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX50) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000 + +zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 +params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 +initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 + +zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX53) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 + zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 9273c2a24b54..2d88f8b9a454 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -814,6 +814,16 @@ DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg); DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg); DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg); +static unsigned long twd_clk_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 2; +} + +static struct clk twd_clk = { + .parent = &arm_clk, + .get_rate = twd_clk_get_rate, +}; + static unsigned long pll2_200m_get_rate(struct clk *clk) { return clk_get_rate(clk->parent) / 2; @@ -1894,6 +1904,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk), _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk), _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk), + _REGISTER_CLOCK("smp_twd", NULL, twd_clk), _REGISTER_CLOCK(NULL, "ckih", ckih_clk), _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk), _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk), diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c index 4cb276977190..08470504a088 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-imx/clock-mx51-mx53.c @@ -23,7 +23,7 @@ #include <mach/common.h> #include <mach/clock.h> -#include "crm_regs.h" +#include "crm-regs-imx5.h" /* External clock values passed-in by the board code */ static unsigned long external_high_reference, external_low_reference; diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-imx/cpu-imx5.c index 5e2e7a843860..5e2e7a843860 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-imx/cpu-imx5.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c index 9d34c3d4c024..9d34c3d4c024 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.c +++ b/arch/arm/mach-imx/cpu_op-mx51.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h index 97477fecb469..97477fecb469 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.h +++ b/arch/arm/mach-imx/cpu_op-mx51.h diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7daee2..5e11ba7daee2 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h index 7216667eaafc..7216667eaafc 100644 --- a/arch/arm/mach-mx5/devices-imx50.h +++ b/arch/arm/mach-imx/devices-imx50.h diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index af488bc0e225..af488bc0e225 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h index 6e1e5d1f8c3a..6e1e5d1f8c3a 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-imx/devices-imx53.h diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-imx/efika.h index 014aa985faae..014aa985faae 100644 --- a/arch/arm/mach-mx5/efika.h +++ b/arch/arm/mach-imx/efika.h diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-imx/ehci-imx5.c index c17fa131728b..c17fa131728b 100644 --- a/arch/arm/mach-mx5/ehci.c +++ b/arch/arm/mach-imx/ehci-imx5.c diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c index a6a3ab8f1b1c..a6a3ab8f1b1c 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c index d817fc80b986..d817fc80b986 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index e6bad17b908c..e6bad17b908c 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 05ebb3e68679..05ebb3e68679 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c index 944025da8333..944025da8333 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-imx/mach-cpuimx51.c diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9fbe923c8b08..9fbe923c8b08 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c index 42b66e8d9615..42b66e8d9615 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-imx/mach-mx50_rdp.c diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 83eab4176ca4..83eab4176ca4 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index e4b822e9f719..e4b822e9f719 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c index 3a5ed2dd885a..3a5ed2dd885a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-imx/mach-mx51_efikamx.c diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c index ea5f65b0381a..ea5f65b0381a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-imx/mach-mx51_efikasb.c diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 5f224f1c3eb6..753f4fc9ec04 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) @@ -189,8 +188,10 @@ static int weim_cs_config(void) return -ENOMEM; iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); - if (!iomuxc_base) + if (!iomuxc_base) { + iounmap(weim_base); return -ENOMEM; + } /* CS1 timings for LAN9220 */ writel(0x20001, (weim_base + 0x18)); diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c index d6ce137896d6..5a72188b9cdb 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-imx/mach-mx53_evk.c @@ -37,7 +37,6 @@ #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) #define MX53EVK_LED IMX_GPIO_NR(7, 7) -#include "crm_regs.h" #include "devices-imx53.h" static iomux_v3_cfg_t mx53_evk_pads[] = { diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c index fd8b524e1c58..37f67cac15a4 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-imx/mach-mx53_loco.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c index 22c53c9b18aa..8e972c5c3e13 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-imx/mach-mx53_smd.c @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea3817..bc17dfea3817 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-imx/mm-imx5.c diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c index ec6ca91b299b..ec6ca91b299b 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-imx/mx51_efika.c diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-imx/pm-imx5.c index 5eebfaad1226..6dc093448057 100644 --- a/arch/arm/mach-mx5/system.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -1,8 +1,6 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: @@ -10,14 +8,22 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/platform_device.h> +#include <linux/suspend.h> +#include <linux/clk.h> #include <linux/io.h> -#include <mach/hardware.h> +#include <linux/err.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> #include <mach/common.h> -#include "crm_regs.h" +#include <mach/hardware.h> +#include "crm-regs-imx5.h" + +static struct clk *gpc_dvfs_clk; -/* set cpu low power mode before WFI instruction. This function is called - * mx5 because it can be used for mx50, mx51, and mx53.*/ +/* + * set cpu low power mode before WFI instruction. This function is called + * mx5 because it can be used for mx50, mx51, and mx53. + */ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) { u32 plat_lpc, arm_srpgcr, ccm_clpcr; @@ -80,3 +86,68 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR); } } + +static int mx5_suspend_prepare(void) +{ + return clk_enable(gpc_dvfs_clk); +} + +static int mx5_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + mx5_cpu_lp_set(STOP_POWER_OFF); + break; + case PM_SUSPEND_STANDBY: + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + break; + default: + return -EINVAL; + } + + if (state == PM_SUSPEND_MEM) { + local_flush_tlb_all(); + flush_cache_all(); + + /*clear the EMPGC0/1 bits */ + __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); + } + cpu_do_idle(); + return 0; +} + +static void mx5_suspend_finish(void) +{ + clk_disable(gpc_dvfs_clk); +} + +static int mx5_pm_valid(suspend_state_t state) +{ + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); +} + +static const struct platform_suspend_ops mx5_suspend_ops = { + .valid = mx5_pm_valid, + .prepare = mx5_suspend_prepare, + .enter = mx5_suspend_enter, + .finish = mx5_suspend_finish, +}; + +static int __init mx5_pm_init(void) +{ + if (!cpu_is_mx51() && !cpu_is_mx53()) + return 0; + + if (gpc_dvfs_clk == NULL) + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + + if (!IS_ERR(gpc_dvfs_clk)) { + if (cpu_is_mx51()) + suspend_set_ops(&mx5_suspend_ops); + } else + return -EPERM; + + return 0; +} +device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig deleted file mode 100644 index 9cf4c3c1914d..000000000000 --- a/arch/arm/mach-mx5/Kconfig +++ /dev/null @@ -1,241 +0,0 @@ -if ARCH_MX5 - -# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single -# image. So for most time, SOC_IMX50/51/53 should be used. - -config ARCH_MX51 - bool - -config ARCH_MX50 - bool - -config ARCH_MX53 - bool - -config SOC_IMX50 - bool - select CPU_V7 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX50 - -config SOC_IMX51 - bool - select CPU_V7 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX51 - -config SOC_IMX53 - bool - select CPU_V7 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MX53 - -#comment "i.MX50 machines:" - -config MACH_MX50_RDP - bool "Support MX50 reference design platform" - depends on BROKEN - select SOC_IMX50 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX50 reference design platform (RDP) board. This - includes specific configurations for the board and its peripherals. - -comment "i.MX51 machines:" - -config MACH_IMX51_DT - bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 - select USE_OF - select MACH_MX51_BABBAGE - help - Include support for Freescale i.MX51 based platforms - using the device tree for discovery - -config MACH_MX51_BABBAGE - bool "Support MX51 BABBAGE platforms" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX51 Babbage platform, also known as MX51EVK in - u-boot. This includes specific configurations for the board and its - peripherals. - -config MACH_MX51_3DS - bool "Support MX51PDK (3DS)" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - help - Include support for MX51PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - -config MACH_EUKREA_CPUIMX51 - bool "Support Eukrea CPUIMX51 module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51 platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51 - default MACH_EUKREA_MBIMX51_BASEBOARD - -config MACH_EUKREA_MBIMX51_BASEBOARD - prompt "Eukrea MBIMX51 development board" - bool - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX51 evaluation board. - -endchoice - -config MACH_EUKREA_CPUIMX51SD - bool "Support Eukrea CPUIMX51SD module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51SD platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51SD - default MACH_EUKREA_MBIMXSD51_BASEBOARD - -config MACH_EUKREA_MBIMXSD51_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -config MX51_EFIKA_COMMON - bool - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_PATA_IMX - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika MX nettop. This includes specific - configurations for the board and its peripherals. - -config MACH_MX51_EFIKASB - bool "Support MX51 Genesi Efika Smartbook" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika Smartbook. This includes specific - configurations for the board and its peripherals. - -comment "i.MX53 machines:" - -config MACH_IMX53_DT - bool "Support i.MX53 platforms from device tree" - select SOC_IMX53 - select USE_OF - select MACH_MX53_ARD - select MACH_MX53_EVK - select MACH_MX53_LOCO - select MACH_MX53_SMD - help - Include support for Freescale i.MX53 based platforms - using the device tree for discovery - -config MACH_MX53_EVK - bool "Support MX53 EVK platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - Include support for MX53 EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_SMD - bool "Support MX53 SMD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for MX53 SMD platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_LOCO - bool "Support MX53 LOCO platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - select LEDS_GPIO_REGISTER - help - Include support for MX53 LOCO platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_ARD - bool "Support MX53 ARD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - help - Include support for MX53 ARD platform. This includes specific - configurations for the board and its peripherals. - -endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile deleted file mode 100644 index 0fc60807fa2b..000000000000 --- a/arch/arm/mach-mx5/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. -obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o - -obj-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o -obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o -obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o -obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o -obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o -obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o -obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o -obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o -obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o -obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o -obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o -obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o - -obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o -obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot deleted file mode 100644 index ca207ca305ec..000000000000 --- a/arch/arm/mach-mx5/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ - zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX50) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000 - zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000 -params_phys-$(CONFIG_ARCH_MX51) := 0x90000100 -initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 - zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000 diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c deleted file mode 100644 index 98052fc852c7..000000000000 --- a/arch/arm/mach-mx5/pm-imx5.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#include <linux/suspend.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include "crm_regs.h" - -static struct clk *gpc_dvfs_clk; - -static int mx5_suspend_prepare(void) -{ - return clk_enable(gpc_dvfs_clk); -} - -static int mx5_suspend_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - mx5_cpu_lp_set(STOP_POWER_OFF); - break; - case PM_SUSPEND_STANDBY: - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - break; - default: - return -EINVAL; - } - - if (state == PM_SUSPEND_MEM) { - local_flush_tlb_all(); - flush_cache_all(); - - /*clear the EMPGC0/1 bits */ - __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); - } - cpu_do_idle(); - return 0; -} - -static void mx5_suspend_finish(void) -{ - clk_disable(gpc_dvfs_clk); -} - -static int mx5_pm_valid(suspend_state_t state) -{ - return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); -} - -static const struct platform_suspend_ops mx5_suspend_ops = { - .valid = mx5_pm_valid, - .prepare = mx5_suspend_prepare, - .enter = mx5_suspend_enter, - .finish = mx5_suspend_finish, -}; - -static int __init mx5_pm_init(void) -{ - if (gpc_dvfs_clk == NULL) - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - - if (!IS_ERR(gpc_dvfs_clk)) { - if (cpu_is_mx51()) - suspend_set_ops(&mx5_suspend_ops); - } else - return -EPERM; - - return 0; -} -device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index a3e0c8692f0d..52af00446a63 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -7,6 +7,7 @@ config UX500_SOC_COMMON select HAS_MTU select ARM_ERRATA_753970 select ARM_ERRATA_754322 + select ARM_ERRATA_764369 menu "Ux500 SoC" diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 23be34b3bb6e..5dde4d4ebe88 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -261,6 +261,8 @@ void __init mop500_sdi_init(void) void __init snowball_sdi_init(void) { + /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ + mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 122ddde00ba7..da5569d83d58 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -12,44 +12,6 @@ static void __iomem *l2x0_base; -static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) -{ - /* wait for the operation to complete */ - while (readl_relaxed(reg) & mask) - cpu_relax(); -} - -static inline void ux500_cache_sync(void) -{ - writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC); - ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1); -} - -/* - * The L2 cache cannot be turned off in the non-secure world. - * Dummy until a secure service is in place. - */ -static void ux500_l2x0_disable(void) -{ -} - -/* - * This is only called when doing a kexec, just after turning off the L2 - * and L1 cache, and it is surrounded by a spinlock in the generic version. - * However, we're not really turning off the L2 cache right now and the - * PL310 does not support exclusive accesses (used to implement the spinlock). - * So, the invalidation needs to be done without the spinlock. - */ -static void ux500_l2x0_inv_all(void) -{ - uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ - - /* invalidate all ways */ - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); - ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); - ux500_cache_sync(); -} - static int __init ux500_l2x0_unlock(void) { int i; @@ -85,9 +47,13 @@ static int __init ux500_l2x0_init(void) /* 64KB way size, 8 way associativity, force WA */ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); - /* Override invalidate function */ - outer_cache.disable = ux500_l2x0_disable; - outer_cache.inv_all = ux500_l2x0_inv_all; + /* + * We can't disable l2 as we are in non secure mode, currently + * this seems be called only during kexec path. So let's + * override outer.disable with nasty assignment until we have + * some SMI service available. + */ + outer_cache.disable = NULL; return 0; } diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 0a01cbdfe063..9f9e1c203061 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -95,13 +95,7 @@ static struct musb_hdrc_config musb_hdrc_config = { }; static struct musb_hdrc_platform_data musb_platform_data = { -#if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ - .mode = MUSB_HOST, -#endif .config = &musb_hdrc_config, .board_data = &musb_board_data, }; diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b30708e28c1d..dcebb1230f7f 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -17,26 +17,17 @@ config ARCH_IMX_V4_V5 and ARMv5 SoCs config ARCH_IMX_V6_V7 - bool "i.MX3, i.MX6" + bool "i.MX3, i.MX5, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT select MIGHT_HAVE_CACHE_L2X0 help - This enables support for systems based on the Freescale i.MX3 and i.MX6 - family. - -config ARCH_MX5 - bool "i.MX50, i.MX51, i.MX53" - select AUTO_ZRELADDR if !ZBOOT_ROM - select ARM_PATCH_PHYS_VIRT - help - This enables support for machines using Freescale's i.MX50 and i.MX53 - processors. + This enables support for systems based on the Freescale i.MX3, i.MX5 + and i.MX6 family. endchoice source "arch/arm/mach-imx/Kconfig" -source "arch/arm/mach-mx5/Kconfig" endmenu diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index 6fa8a707b9a0..f7d18046c04f 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -96,6 +96,6 @@ extern int mxc_gpio_mode(int gpio_mode); extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); -extern int __init imx_iomuxv1_init(void __iomem *base, int numports); +extern int imx_iomuxv1_init(void __iomem *base, int numports); #endif /* __MACH_IOMUX_V1_H__ */ |
