diff options
Diffstat (limited to 'arch/arm')
56 files changed, 397 insertions, 298 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9619c43783ff..955fc53c1c01 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -12,6 +12,7 @@ config ARM select SYS_SUPPORTS_APM_EMULATION select HAVE_OPROFILE select HAVE_KPROBES if (!XIP_KERNEL) + select HAVE_KRETPROBES if (HAVE_KPROBES) help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -939,7 +940,8 @@ config KEXEC config ATAGS_PROC bool "Export atags in procfs" - default n + depends on KEXEC + default y help Should the atags used to boot the kernel be exported in an "atags" file in procfs. Useful with kexec. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7b8ff66febe1..1a4649667ec8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -251,6 +251,7 @@ define archhelp echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)' + echo ' uImage - U-Boot wrapped zImage' echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=<path>)' echo ' install - Install uncompressed kernel' diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 97b7dc13d9aa..538262241483 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -274,7 +274,7 @@ static int it8152_pci_platform_notify_remove(struct device *dev) int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) { dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", - __FUNCTION__, dma_addr, size); + __func__, dma_addr, size); return (dev->bus == &pci_bus_type) && ((dma_addr + size - PHYS_OFFSET) >= SZ_64M); } @@ -289,7 +289,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) */ int pci_set_dma_mask(struct pci_dev *dev, u64 mask) { - dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask); + dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask); if (mask >= PHYS_OFFSET + SZ_64M - 1) return 0; @@ -299,7 +299,7 @@ int pci_set_dma_mask(struct pci_dev *dev, u64 mask) int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) { - dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask); + dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask); if (mask >= PHYS_OFFSET + SZ_64M - 1) return 0; diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index c2345af3707a..323c1deeb953 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc5 -# Mon Dec 17 20:04:38 2007 +# Linux kernel version: 2.6.25-rc3 +# Mon Mar 3 03:39:48 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,17 +41,22 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -64,17 +70,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -102,6 +117,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # # System Type @@ -130,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -139,6 +157,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set # # TI OMAP Implementations @@ -155,6 +174,7 @@ CONFIG_OMAP_MUX=y # CONFIG_OMAP_MUX_DEBUG is not set CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 @@ -266,6 +286,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# CONFIG_ATAGS_PROC is not set # # CPU Frequency scaling @@ -311,9 +332,10 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -330,6 +352,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -384,6 +407,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -421,11 +445,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HAVE_IDE is not set # # SCSI device support @@ -489,6 +515,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -512,7 +539,6 @@ CONFIG_SLIP_COMPRESSED=y CONFIG_SLHC=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -616,12 +642,10 @@ CONFIG_I2C_OMAP=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TPS65010=y @@ -649,6 +673,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -676,6 +701,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -683,6 +709,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -705,6 +732,7 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set # # Multimedia devices @@ -802,10 +830,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set @@ -826,12 +850,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -874,8 +896,10 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -946,9 +970,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -975,6 +996,7 @@ CONFIG_FRAME_POINTER=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -992,6 +1014,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1006,12 +1031,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index d592a6487114..d4ca5e6e4ffa 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc5 -# Mon Dec 17 21:12:45 2007 +# Linux kernel version: 2.6.25-rc3 +# Mon Mar 3 03:35:17 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -39,17 +40,22 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -63,17 +69,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -101,6 +116,8 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # # System Type @@ -129,6 +146,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -138,6 +156,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set # # TI OMAP Implementations @@ -154,6 +173,7 @@ CONFIG_OMAP_MUX=y # CONFIG_OMAP_MUX_DEBUG is not set CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 @@ -173,13 +193,13 @@ CONFIG_ARCH_OMAP16XX=y # # OMAP Board Type # -# CONFIG_MACH_OMAP_INNOVATOR is not set -# CONFIG_MACH_OMAP_H2 is not set -# CONFIG_MACH_OMAP_H3 is not set +CONFIG_MACH_OMAP_INNOVATOR=y +CONFIG_MACH_OMAP_H2=y +CONFIG_MACH_OMAP_H3=y CONFIG_MACH_OMAP_OSK=y # CONFIG_OMAP_OSK_MISTRAL is not set -# CONFIG_MACH_NOKIA770 is not set -# CONFIG_MACH_OMAP_GENERIC is not set +CONFIG_MACH_NOKIA770=y +CONFIG_MACH_OMAP_GENERIC=y # # OMAP CPU Speed @@ -275,6 +295,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# CONFIG_ATAGS_PROC is not set # # CPU Frequency scaling @@ -307,9 +328,10 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -326,6 +348,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -381,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -493,11 +517,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m @@ -519,7 +545,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -553,6 +578,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -574,7 +600,6 @@ CONFIG_PPP_MULTILINK=y # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=y -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -671,6 +696,7 @@ CONFIG_HW_RANDOM_OMAP=m # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y @@ -698,12 +724,10 @@ CONFIG_I2C_OMAP=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TPS65010=y @@ -731,6 +755,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -758,6 +783,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -765,6 +791,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -780,6 +807,7 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set # # Multimedia devices @@ -865,10 +893,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set @@ -889,12 +913,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -948,8 +970,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1019,9 +1043,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1045,7 +1066,51 @@ CONFIG_FRAME_POINTER=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 024a9cf469b4..50f667febe29 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -11,6 +11,9 @@ * */ +#define ATAG_CORE 0x54410001 +#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) + .type __switch_data, %object __switch_data: .long __mmap_switched diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 7898cbc9861a..bff4c6e90dd5 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -29,9 +29,6 @@ #define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) #define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET) -#define ATAG_CORE 0x54410001 -#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) - /* * swapper_pg_dir is the virtual address of the initial page table. diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index a22a98c43ca5..13e371aad879 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -431,6 +431,11 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) return 0; } +int __kprobes arch_trampoline_kprobe(struct kprobe *p) +{ + return 0; +} + static struct undef_hook kprobes_break_hook = { .instr_mask = 0xffffffff, .instr_val = KPROBE_BREAKPOINT_INSTRUCTION, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 38313abef657..bf103b24c937 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -245,10 +245,7 @@ static struct fb_monspecs at91fb_default_monspecs = { static void at91_lcdc_power_control(int on) { - if (on) - at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */ - else - at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */ + at91_set_gpio_value(AT91_PIN_PA30, on); } /* Driver datas */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index f629c2b5f0c5..ee4964abcaf5 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -490,6 +490,11 @@ postcore_initcall(at91_gpio_debugfs_init); /*--------------------------------------------------------------------------*/ +/* This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + /* * Called from the processor-specific init to enable GPIO interrupt support. */ @@ -510,6 +515,8 @@ void __init at91_gpio_irq_setup(void) __raw_writel(~0, this->regbase + PIO_IDR); for (i = 0, pin = this->chipbase; i < 32; i++, pin++) { + lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class); + /* * Can use the "simple" and not "edge" handler since it's * shorter, and the AIC handles interrupts sanely. diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 7f31816896ad..45144ad2bed9 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -103,7 +103,7 @@ static void h720x_gpio_handler(unsigned int mask, unsigned int irq, struct irq_desc *desc) { - IRQDBG("%s irq: %d\n",__FUNCTION__,irq); + IRQDBG("%s irq: %d\n", __func__, irq); desc = irq_desc + irq; while (mask) { if (mask & 1) { @@ -123,7 +123,7 @@ h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOA(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } @@ -133,7 +133,7 @@ h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) unsigned int mask, irq; mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOB(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } @@ -144,7 +144,7 @@ h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOC(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } @@ -155,7 +155,7 @@ h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOD(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } @@ -167,7 +167,7 @@ h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOE(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } #endif diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c index bc6fb02d213b..a59ff2987cb7 100644 --- a/arch/arm/mach-imx/dma.c +++ b/arch/arm/mach-imx/dma.c @@ -54,7 +54,7 @@ static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount) if (!imxdma->name) { printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return 0; } @@ -288,7 +288,7 @@ imx_dma_setup_handlers(imx_dmach_t dma_ch, if (!imxdma->name) { printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return -ENODEV; } @@ -321,7 +321,7 @@ void imx_dma_enable(imx_dmach_t dma_ch) if (!imxdma->name) { printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return; } @@ -365,7 +365,7 @@ int imx_dma_request(imx_dmach_t dma_ch, const char *name) if (dma_ch >= IMX_DMA_CHANNELS) { printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return -EINVAL; } @@ -396,7 +396,7 @@ void imx_dma_free(imx_dmach_t dma_ch) if (!imxdma->name) { printk(KERN_CRIT "%s: trying to free channel %d which is already freed\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return; } @@ -456,7 +456,7 @@ imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name, } } - printk(KERN_ERR "%s: no free DMA channel found\n", __FUNCTION__); + printk(KERN_ERR "%s: no free DMA channel found\n", __func__); return -ENODEV; } diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c index a7465db84893..e6695c4e623b 100644 --- a/arch/arm/mach-imx/irq.c +++ b/arch/arm/mach-imx/irq.c @@ -160,21 +160,21 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) static void imx_gpio_ack_irq(unsigned int irq) { - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq); + DEBUG_IRQ("%s: irq %d\n", __func__, irq); ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32); } static void imx_gpio_mask_irq(unsigned int irq) { - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq); + DEBUG_IRQ("%s: irq %d\n", __func__, irq); IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32)); } static void imx_gpio_unmask_irq(unsigned int irq) { - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq); + DEBUG_IRQ("%s: irq %d\n", __func__, irq); IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32); } diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 268a8d84999c..77b24cd1d88d 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -81,7 +81,7 @@ static void __init iq81340mc_init(void) static void __init iq81340mc_timer_init(void) { unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio(); - printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq); + printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq); iop_init_time(bus_freq); } diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index a51ffd2683e5..e8522b3b8163 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -83,7 +83,7 @@ static void __init iq81340sc_init(void) static void __init iq81340sc_timer_init(void) { unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio(); - printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq); + printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq); iop_init_time(bus_freq); } diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 99d94cb1bafd..7825c1aaa27b 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -94,13 +94,13 @@ void iop13xx_map_pci_memory(void) , 0, iop13xx_atux_mem_size, MT_DEVICE); if (!iop13xx_atux_mem_base) { printk("%s: atux allocation " - "failed\n", __FUNCTION__); + "failed\n", __func__); BUG(); } } else iop13xx_atux_mem_size = 0; PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n", - __FUNCTION__, atu, iop13xx_atux_mem_size, + __func__, atu, iop13xx_atux_mem_size, iop13xx_atux_mem_base); break; case 1: @@ -120,13 +120,13 @@ void iop13xx_map_pci_memory(void) , 0, iop13xx_atue_mem_size, MT_DEVICE); if (!iop13xx_atue_mem_base) { printk("%s: atue allocation " - "failed\n", __FUNCTION__); + "failed\n", __func__); BUG(); } } else iop13xx_atue_mem_size = 0; PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n", - __FUNCTION__, atu, iop13xx_atue_mem_size, + __func__, atu, iop13xx_atue_mem_size, iop13xx_atue_mem_base); break; } diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index bfe0c87e3397..246f6d478720 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -519,7 +519,7 @@ void __init iop13xx_platform_init(void) if (iq8134x_flash_resource.end > iq8134x_flash_resource.start) iop13xx_devices[plat_idx++] = &iq8134x_flash; else - printk(KERN_ERR "%s: Failed to probe flash size\n", __FUNCTION__); + printk(KERN_ERR "%s: Failed to probe flash size\n", __func__); #endif platform_add_devices(iop13xx_devices, plat_idx); diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index bf04121d1a31..64be341109b3 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -87,7 +87,7 @@ static inline int check_master_abort(void) if (isr & PCI_ISR_PFE) { /* make sure the Master Abort bit is reset */ *PCI_ISR = PCI_ISR_PFE; - pr_debug("%s failed\n", __FUNCTION__); + pr_debug("%s failed\n", __func__); return 1; } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 0d5a42455820..49dec7868807 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -65,7 +65,7 @@ static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin) else rc = gtwx5715_irqmap[slot][pin-1]; - printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, rc); + printk("%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, rc); return(rc); } diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index b9ca8f98265d..fd7537f7d11e 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -133,7 +133,7 @@ netx_hif_ack_irq(unsigned int _irq) val &= ~((1 << 24) << irq); writel(val, NETX_DPMAS_INT_EN); - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); + DEBUG_IRQ("%s: irq %d\n", __func__, _irq); } static void @@ -145,7 +145,7 @@ netx_hif_mask_irq(unsigned int _irq) val = readl(NETX_DPMAS_INT_EN); val &= ~((1 << 24) << irq); writel(val, NETX_DPMAS_INT_EN); - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); + DEBUG_IRQ("%s: irq %d\n", __func__, _irq); } static void @@ -157,7 +157,7 @@ netx_hif_unmask_irq(unsigned int _irq) val = readl(NETX_DPMAS_INT_EN); val |= (1 << 24) << irq; writel(val, NETX_DPMAS_INT_EN); - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); + DEBUG_IRQ("%s: irq %d\n", __func__, _irq); } static struct irq_chip netx_hif_chip = { diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c index b2230213b983..5286e9fc1d30 100644 --- a/arch/arm/mach-ns9xxx/gpio.c +++ b/arch/arm/mach-ns9xxx/gpio.c @@ -31,7 +31,7 @@ static spinlock_t gpio_lock = __SPIN_LOCK_UNLOCKED(gpio_lock); /* only access gpiores with atomic ops */ -static DECLARE_BITMAP(gpiores, GPIO_MAX); +static DECLARE_BITMAP(gpiores, GPIO_MAX + 1); static inline int ns9xxx_valid_gpio(unsigned gpio) { diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 070345ee39a5..507987720015 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -350,6 +350,10 @@ static void __init h2_init_smc91x(void) static struct i2c_board_info __initdata h2_i2c_board_info[] = { { + I2C_BOARD_INFO("tps65010", 0x48), + .type = "tps65010", + .irq = OMAP_GPIO_IRQ(58), + }, { I2C_BOARD_INFO("isp1301_omap", 0x2d), .type = "isp1301_omap", .irq = OMAP_GPIO_IRQ(2), diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 6fc516855a8c..c3ef1ee5f77b 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -26,6 +26,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> #include <asm/setup.h> @@ -51,6 +52,8 @@ #include <asm/arch/mcbsp.h> #include <asm/arch/omap-alsa.h> +#define H3_TS_GPIO 48 + static int h3_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -373,6 +376,17 @@ static struct platform_device h3_lcd_device = { .id = -1, }; +static struct spi_board_info h3_spi_board_info[] __initdata = { + [0] = { + .modalias = "tsc2101", + .bus_num = 2, + .chip_select = 0, + .irq = OMAP_GPIO_IRQ(H3_TS_GPIO), + .max_speed_hz = 16000000, + /* .platform_data = &tsc_platform_data, */ + }, +}; + static struct omap_mcbsp_reg_cfg mcbsp_regs = { .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), .spcr1 = RINTM(3) | RRST, @@ -457,6 +471,14 @@ static struct omap_board_config_kernel h3_config[] __initdata = { { OMAP_TAG_LCD, &h3_lcd_config }, }; +static struct i2c_board_info __initdata h3_i2c_board_info[] = { + { + I2C_BOARD_INFO("tps65010", 0x48), + .type = "tps65013", + /* .irq = OMAP_GPIO_IRQ(??), */ + }, +}; + static struct omap_gpio_switch h3_gpio_switches[] __initdata = { { .name = "mmc_slot", diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 8eb5dcdaead2..e6c64e10b7ec 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -717,7 +717,7 @@ static int __init omap_pm_init(void) #endif #ifdef CONFIG_OMAP_32K_TIMER - error = sysfs_create_file(power_kobj, &sleep_while_idle_attr); + error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr); if (error) printk(KERN_ERR "sysfs_create_file failed: %d\n", error); #endif diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5a4091f582ed..69c8174f3aac 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -42,6 +42,12 @@ static struct map_desc omap2_io_desc[] __initdata = { .length = L3_24XX_SIZE, .type = MT_DEVICE }, + { + .virtual = L4_24XX_VIRT, + .pfn = __phys_to_pfn(L4_24XX_PHYS), + .length = L4_24XX_SIZE, + .type = MT_DEVICE + }, #ifdef CONFIG_ARCH_OMAP2430 { .virtual = L4_WK_243X_VIRT, diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c index 2e2fd63643c3..58cc3c0333b6 100644 --- a/arch/arm/mach-orion/addr-map.c +++ b/arch/arm/mach-orion/addr-map.c @@ -97,14 +97,20 @@ #define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4)) #define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8)) #define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8)) -#define PCIE_WIN_CTRL(n) ORION_PCIE_REG(0x1820 + ((n) << 4)) -#define PCIE_WIN_BASE(n) ORION_PCIE_REG(0x1824 + ((n) << 4)) -#define PCIE_WIN_REMAP(n) ORION_PCIE_REG(0x182c + ((n) << 4)) +#define PCIE_WIN_CTRL(n) (((n) < 5) ? \ + ORION_PCIE_REG(0x1820 + ((n) << 4)) : \ + ORION_PCIE_REG(0x1880)) +#define PCIE_WIN_BASE(n) (((n) < 5) ? \ + ORION_PCIE_REG(0x1824 + ((n) << 4)) : \ + ORION_PCIE_REG(0x1884)) +#define PCIE_WIN_REMAP(n) (((n) < 5) ? \ + ORION_PCIE_REG(0x182c + ((n) << 4)) : \ + ORION_PCIE_REG(0x188c)) #define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0) #define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0) #define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4) #define PCIE_MAX_BARS 3 -#define PCIE_MAX_WINS 5 +#define PCIE_MAX_WINS 6 /* * Use PCIE BAR '1' for all DDR banks diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index 5f0ee4b8a9b7..bbc2b4ec932c 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -17,7 +17,9 @@ #include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> #include <asm/page.h> +#include <asm/setup.h> #include <asm/timex.h> +#include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/arch/hardware.h> #include "common.h" @@ -177,8 +179,8 @@ static struct platform_device orion_ehci1 = { static struct resource orion_eth_shared_resources[] = { { - .start = ORION_ETH_PHYS_BASE, - .end = ORION_ETH_PHYS_BASE + 0xffff, + .start = ORION_ETH_PHYS_BASE + 0x2000, + .end = ORION_ETH_PHYS_BASE + 0x3fff, .flags = IORESOURCE_MEM, }, }; @@ -347,3 +349,21 @@ void __init orion_init(void) platform_device_register(&orion_ehci1); platform_device_register(&orion_i2c); } + +/* + * Many orion-based systems have buggy bootloader implementations. + * This is a common fixup for bogus memory tags. + */ +void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t, + char **from, struct meminfo *meminfo) +{ + for (; t->hdr.size; t = tag_next(t)) + if (t->hdr.tag == ATAG_MEM && + (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK || + t->u.mem.start & ~PAGE_MASK)) { + printk(KERN_WARNING + "Clearing invalid memory bank %dKB@0x%08x\n", + t->u.mem.size / 1024, t->u.mem.start); + t->hdr.tag = 0; + } +} diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h index 10154ec885df..501497cc2c4d 100644 --- a/arch/arm/mach-orion/common.h +++ b/arch/arm/mach-orion/common.h @@ -83,4 +83,10 @@ struct mv_sata_platform_data; void __init orion_sata_init(struct mv_sata_platform_data *sata_data); +struct machine_desc; +struct meminfo; +struct tag; +extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, + char **, struct meminfo *); + #endif /* __ARCH_ORION_COMMON_H__ */ diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c index 02b280c24820..076e155ad510 100644 --- a/arch/arm/mach-orion/dns323-setup.c +++ b/arch/arm/mach-orion/dns323-setup.c @@ -319,4 +319,5 @@ MACHINE_START(DNS323, "D-Link DNS-323") .map_io = orion_map_io, .init_irq = orion_init_irq, .timer = &orion_timer, + .fixup = tag_fixup_mem32, MACHINE_END diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c index d5f00c86d616..f713818c66a3 100644 --- a/arch/arm/mach-orion/gpio.c +++ b/arch/arm/mach-orion/gpio.c @@ -36,7 +36,7 @@ int gpio_direction_input(unsigned pin) unsigned long flags; if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + pr_debug("%s: invalid GPIO %d\n", __func__, pin); return -EINVAL; } @@ -62,7 +62,7 @@ int gpio_direction_output(unsigned pin, int value) int mask; if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + pr_debug("%s: invalid GPIO %d\n", __func__, pin); return -EINVAL; } @@ -141,7 +141,7 @@ int gpio_request(unsigned pin, const char *label) unsigned long flags; if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + pr_debug("%s: invalid GPIO %d\n", __func__, pin); return -EINVAL; } @@ -149,7 +149,7 @@ int gpio_request(unsigned pin, const char *label) if (gpio_label[pin]) { pr_debug("%s: GPIO %d already used as %s\n", - __FUNCTION__, pin, gpio_label[pin]); + __func__, pin, gpio_label[pin]); ret = -EBUSY; } else gpio_label[pin] = label ? label : "?"; @@ -162,12 +162,12 @@ EXPORT_SYMBOL(gpio_request); void gpio_free(unsigned pin) { if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + pr_debug("%s: invalid GPIO %d\n", __func__, pin); return; } if (!gpio_label[pin]) - pr_warning("%s: GPIO %d already freed\n", __FUNCTION__, pin); + pr_warning("%s: GPIO %d already freed\n", __func__, pin); else gpio_label[pin] = NULL; } diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c index 6817aca4aa26..785a07bdf1e2 100644 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ b/arch/arm/mach-orion/kurobox_pro-setup.c @@ -240,4 +240,5 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") .map_io = orion_map_io, .init_irq = orion_init_irq, .timer = &orion_timer, + .fixup = tag_fixup_mem32, MACHINE_END diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c index b8cfe6813e9d..45764dad16d0 100644 --- a/arch/arm/mach-orion/ts209-setup.c +++ b/arch/arm/mach-orion/ts209-setup.c @@ -357,4 +357,5 @@ MACHINE_START(TS209, "QNAP TS-109/TS-209") .map_io = orion_map_io, .init_irq = orion_init_irq, .timer = &orion_timer, + .fixup = tag_fixup_mem32, MACHINE_END diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index daa8d3d98eff..8e00ed43fb95 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -976,7 +976,7 @@ static int __init clk_init(void) (*clkp)->set_parent((*clkp), (*clkp)->parent); } pr_debug("%s: clock %s, rate %ld\n", - __FUNCTION__, (*clkp)->name, (*clkp)->rate); + __func__, (*clkp)->name, (*clkp)->rate); } local_clk_use(&ck_pll4); diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c index f7009d845be8..fe152e82590b 100644 --- a/arch/arm/mach-pnx4008/dma.c +++ b/arch/arm/mach-pnx4008/dma.c @@ -192,7 +192,7 @@ void pnx4008_free_channel(int ch) if (!dma_channels[ch].name) { printk(KERN_CRIT "%s: trying to free channel %d which is already freed\n", - __FUNCTION__, ch); + __func__, ch); return; } diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index 15c4e0df3e10..fcda7d5cb693 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -104,7 +104,7 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; - dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin); + dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin); irq = it8152_pci_map_irq(dev, slot, pin); if (irq) diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 6012177a29a3..ecdbc96a4de1 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -504,11 +504,11 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd) struct pxamci_platform_data *p_d = dev->platform_data; if ((1 << vdd) & p_d->ocr_mask) { - printk(KERN_DEBUG "%s: on\n", __FUNCTION__); + printk(KERN_DEBUG "%s: on\n", __func__); GPCR(105) = GPIO_bit(105); } else { GPSR(105) = GPIO_bit(105); - printk(KERN_DEBUG "%s: off\n", __FUNCTION__); + printk(KERN_DEBUG "%s: off\n", __func__); } } diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c index 939a3867f77c..4b21479332ae 100644 --- a/arch/arm/mach-pxa/cpu-pxa.c +++ b/arch/arm/mach-pxa/cpu-pxa.c @@ -43,7 +43,7 @@ #ifdef DEBUG static unsigned int freq_debug; -MODULE_PARM(freq_debug, "i"); +module_param(freq_debug, uint, 0); MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); #else #define freq_debug 0 diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c index 93c4f31f127f..3215316d7b06 100644 --- a/arch/arm/mach-pxa/dma.c +++ b/arch/arm/mach-pxa/dma.c @@ -81,7 +81,7 @@ void pxa_free_dma (int dma_ch) if (!dma_channels[dma_ch].name) { printk (KERN_CRIT "%s: trying to free channel %d which is already freed\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return; } diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 3d0ad5065ee5..3bb31314429a 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -264,7 +264,7 @@ static int em_x270_mci_init(struct device *dev, "MMC card detect", data); if (err) { printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", - __FUNCTION__, err); + __func__, err); return err; } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 345c3deeb02e..72a436fb9a29 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -390,11 +390,11 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd) struct pxamci_platform_data* p_d = dev->platform_data; if (( 1 << vdd) & p_d->ocr_mask) { - printk(KERN_DEBUG "%s: on\n", __FUNCTION__); + printk(KERN_DEBUG "%s: on\n", __func__); MST_MSCWR1 |= MST_MSCWR1_MMC_ON; MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL; } else { - printk(KERN_DEBUG "%s: off\n", __FUNCTION__); + printk(KERN_DEBUG "%s: off\n", __func__); MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON; } } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 7cd9ef8deb02..35f25fdaeba3 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -129,28 +129,20 @@ static void clk_pxa3xx_cken_enable(struct clk *clk) { unsigned long mask = 1ul << (clk->cken & 0x1f); - local_irq_disable(); - if (clk->cken < 32) CKENA |= mask; else CKENB |= mask; - - local_irq_enable(); } static void clk_pxa3xx_cken_disable(struct clk *clk) { unsigned long mask = 1ul << (clk->cken & 0x1f); - local_irq_disable(); - if (clk->cken < 32) CKENA &= ~mask; else CKENB &= ~mask; - - local_irq_enable(); } static const struct clkops clk_pxa3xx_cken_ops = { diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 853fc9433750..f207fcd30cd7 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -217,7 +217,7 @@ void board_pcmcia_power(int power) ConXS_BCR = trizeps_conxs_bcr; } - pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr); + pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr); } /* backlight power switching for LCD panel */ @@ -228,7 +228,7 @@ static void board_backlight_power(int on) } else { trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP; } - pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr); + pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr); ConXS_BCR = trizeps_conxs_bcr; } @@ -238,10 +238,10 @@ static void board_mci_power(struct device *dev, unsigned int vdd) struct pxamci_platform_data* p_d = dev->platform_data; if (( 1 << vdd) & p_d->ocr_mask) { - pr_debug("%s: on\n", __FUNCTION__); + pr_debug("%s: on\n", __func__); /* FIXME fill in values here */ } else { - pr_debug("%s: off\n", __FUNCTION__); + pr_debug("%s: off\n", __func__); /* FIXME fill in values here */ } } diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 7731d50dd86c..afd2cbfca0d9 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -58,7 +58,7 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES) +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static void zylonite_backlight_power(int on) { gpio_set_value(gpio_backlight, on); diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index f60b7a66dfa0..842d9e6dc5ff 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -206,7 +206,7 @@ static int __init badge4_init(void) if (ret < 0) printk(KERN_ERR "%s: SA-1111 initialization failed (%d)\n", - __FUNCTION__, ret); + __func__, ret); /* maybe turn on 5v0 from the start */ @@ -240,11 +240,11 @@ void badge4_set_5V(unsigned subsystem, int on) /* detect on->off and off->on transitions */ if ((!old_5V_bitmap) && (badge4_5V_bitmap)) { /* was off, now on */ - printk(KERN_INFO "%s: enabling 5V supply rail\n", __FUNCTION__); + printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__); GPSR = BADGE4_GPIO_PCMEN5V; } else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) { /* was on, now off */ - printk(KERN_INFO "%s: disabling 5V supply rail\n", __FUNCTION__); + printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__); GPCR = BADGE4_GPIO_PCMEN5V; } diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index d68630b74d78..343368aa82de 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -139,7 +139,7 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed) if (settings->speed == 0) { panic("%s: couldn't find dram setting for speed %d\n", - __FUNCTION__, new_speed); + __func__, new_speed); } /* No risk, no fun: run with interrupts on! */ diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c index 1fbe053e8b59..e5080286060e 100644 --- a/arch/arm/mach-sa1100/dma.c +++ b/arch/arm/mach-sa1100/dma.c @@ -129,7 +129,7 @@ int sa1100_request_dma (dma_device_t device, const char *device_id, if (err) { printk(KERN_ERR "%s: unable to request IRQ %d for %s\n", - __FUNCTION__, IRQ_DMA0 + i, device_id); + __func__, IRQ_DMA0 + i, device_id); dma->device = 0; return err; } @@ -165,12 +165,12 @@ void sa1100_free_dma(dma_regs_t *regs) if (regs == (dma_regs_t *)&DDAR(i)) break; if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__); + printk(KERN_ERR "%s: bad DMA identifier\n", __func__); return; } if (!dma_chan[i].device) { - printk(KERN_ERR "%s: Trying to free free DMA\n", __FUNCTION__); + printk(KERN_ERR "%s: Trying to free free DMA\n", __func__); return; } @@ -329,7 +329,7 @@ void sa1100_reset_dma(dma_regs_t *regs) if (regs == (dma_regs_t *)&DDAR(i)) break; if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__); + printk(KERN_ERR "%s: bad DMA identifier\n", __func__); return; } diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index b72fee0f2538..8473c37b77d6 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -596,7 +596,7 @@ static void h3800_control_egpio(enum ipaq_egpio_type x, int setp) case IPAQ_EGPIO_CODEC_NRESET: case IPAQ_EGPIO_AUDIO_ON: case IPAQ_EGPIO_QMUTE: - printk("%s: error - should not be called\n", __FUNCTION__); + printk("%s: error - should not be called\n", __func__); break; case IPAQ_EGPIO_OPT_NVRAM_ON: SET_ASIC2(GPIO2_OPT_ON_NVRAM); @@ -638,7 +638,7 @@ static int h3800_pm_callback(int req) static u16 asic2_data; int result = 0; - printk("%s %d\n", __FUNCTION__, req); + printk("%s %d\n", __func__, req); switch (req) { case PM_RESUME: @@ -666,7 +666,7 @@ static int h3800_pm_callback(int req) asic2_data = H3800_ASIC2_GPIOPIOD; break; default: - printk("%s: unrecognized PM callback\n", __FUNCTION__); + printk("%s: unrecognized PM callback\n", __func__); break; } return result; @@ -706,7 +706,7 @@ static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc) { int i; - if (0) printk("%s: interrupt received\n", __FUNCTION__); + if (0) printk("%s: interrupt received\n", __func__); desc->chip->ack(irq); @@ -716,21 +716,21 @@ static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc) /* KPIO */ irq = H3800_ASIC2_KPIINTFLAG; - if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq); + if (0) printk("%s KPIO 0x%08X\n", __func__, irq); for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++) if (irq & kpio_irq_mask[j]) handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j); /* GPIO2 */ irq = H3800_ASIC2_GPIINTFLAG; - if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq); + if (0) printk("%s GPIO 0x%08X\n", __func__, irq); for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++) if (irq & gpio_irq_mask[j]) handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j); } if (i >= MAX_ASIC_ISR_LOOPS) - printk("%s: interrupt processing overrun\n", __FUNCTION__); + printk("%s: interrupt processing overrun\n", __func__); /* For level-based interrupts */ desc->chip->unmask(irq); diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 2728b0e7d2bb..3f6dc40b8353 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -120,6 +120,8 @@ full_search: */ int valid_phys_addr_range(unsigned long addr, size_t size) { + if (addr < PHYS_OFFSET) + return 0; if (addr + size > __pa(high_memory)) return 0; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 500c9610ab30..e0f19ab91163 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -75,7 +75,7 @@ no_pgd: void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd) { pmd_t *pmd; - struct page *pte; + pgtable_t pte; if (!pgd) return; @@ -90,10 +90,8 @@ void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd) goto free; } - pte = pmd_page(*pmd); + pte = pmd_pgtable(*pmd); pmd_clear(pmd); - dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE); - pte_lock_deinit(pte); pte_free(mm, pte); pmd_free(mm, pmd); free: diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 2b5aa1135b11..98d01517b563 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -371,7 +371,7 @@ static int __init iop3xx_init_atu_setup(char *str) default: printk(KERN_DEBUG "\"%s\" malformed at " "character: \'%c\'", - __FUNCTION__, + __func__, *str); *(str + 1) = '\0'; } diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index c0d63b0c61c9..d719c15daa55 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -33,43 +33,33 @@ #define MPU_CLK "virt_prcm_set" #endif +static struct clk *mpu_clk; + /* TODO: Add support for SDRAM timing changes */ int omap_verify_speed(struct cpufreq_policy *policy) { - struct clk * mpu_clk; - if (policy->cpu) return -EINVAL; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - mpu_clk = clk_get(NULL, MPU_CLK); - if (IS_ERR(mpu_clk)) - return PTR_ERR(mpu_clk); + policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000; policy->max = clk_round_rate(mpu_clk, policy->max * 1000) / 1000; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - clk_put(mpu_clk); - return 0; } unsigned int omap_getspeed(unsigned int cpu) { - struct clk * mpu_clk; unsigned long rate; if (cpu) return 0; - mpu_clk = clk_get(NULL, MPU_CLK); - if (IS_ERR(mpu_clk)) - return 0; rate = clk_get_rate(mpu_clk) / 1000; - clk_put(mpu_clk); - return rate; } @@ -77,14 +67,9 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - struct clk * mpu_clk; struct cpufreq_freqs freqs; int ret = 0; - mpu_clk = clk_get(NULL, MPU_CLK); - if (IS_ERR(mpu_clk)) - return PTR_ERR(mpu_clk); - freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; freqs.cpu = 0; @@ -92,15 +77,12 @@ static int omap_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); ret = clk_set_rate(mpu_clk, target_freq * 1000); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - clk_put(mpu_clk); return ret; } static int __init omap_cpu_init(struct cpufreq_policy *policy) { - struct clk * mpu_clk; - mpu_clk = clk_get(NULL, MPU_CLK); if (IS_ERR(mpu_clk)) return PTR_ERR(mpu_clk); @@ -111,17 +93,23 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000; policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - clk_put(mpu_clk); return 0; } +static int omap_cpu_exit(struct cpufreq_policy *policy) +{ + clk_put(mpu_clk); + return 0; +} + static struct cpufreq_driver omap_driver = { .flags = CPUFREQ_STICKY, .verify = omap_verify_speed, .target = omap_target, .get = omap_getspeed, .init = omap_cpu_init, + .exit = omap_cpu_exit, .name = "omap", }; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index c5dab1d6417e..4a53f9ba6c43 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -89,68 +89,6 @@ static inline void omap_init_dsp(void) { } #endif /* CONFIG_OMAP_DSP */ /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) - -#define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP2_I2C_BASE1 0x48070000 -#define OMAP_I2C_SIZE 0x3f -#define OMAP1_I2C_INT INT_I2C -#define OMAP2_I2C_INT1 56 - -static struct resource i2c_resources1[] = { - { - .start = 0, - .end = 0, - .flags = IORESOURCE_MEM, - }, - { - .start = 0, - .flags = IORESOURCE_IRQ, - }, -}; - -/* DMA not used; works around erratum writing to non-empty i2c fifo */ - -static struct platform_device omap_i2c_device1 = { - .name = "i2c_omap", - .id = 1, - .num_resources = ARRAY_SIZE(i2c_resources1), - .resource = i2c_resources1, -}; - -/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */ -static void omap_init_i2c(void) -{ - if (cpu_is_omap24xx()) { - i2c_resources1[0].start = OMAP2_I2C_BASE1; - i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE; - i2c_resources1[1].start = OMAP2_I2C_INT1; - } else { - i2c_resources1[0].start = OMAP1_I2C_BASE; - i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE; - i2c_resources1[1].start = OMAP1_I2C_INT; - } - - /* FIXME define and use a boot tag, in case of boards that - * either don't wire up I2C, or chips that mux it differently... - * it can include clocking and address info, maybe more. - */ - if (cpu_is_omap24xx()) { - omap_cfg_reg(M19_24XX_I2C1_SCL); - omap_cfg_reg(L15_24XX_I2C1_SDA); - } else { - omap_cfg_reg(I2C_SCL); - omap_cfg_reg(I2C_SDA); - } - - (void) platform_device_register(&omap_i2c_device1); -} - -#else -static inline void omap_init_i2c(void) {} -#endif - -/*-------------------------------------------------------------------------*/ #if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) static void omap_init_kp(void) @@ -501,7 +439,6 @@ static int __init omap_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_dsp(); - omap_init_i2c(); omap_init_kp(); omap_init_mmc(); omap_init_uwire(); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index a46676db8113..91004a3c4794 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -137,7 +137,7 @@ static void omap_disable_channel_irq(int lch); static inline void omap_enable_channel_irq(int lch); #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ - __FUNCTION__); + __func__); #ifdef CONFIG_ARCH_OMAP15XX /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ @@ -699,7 +699,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) u32 reg; if (!cpu_class_is_omap2()) { - printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __FUNCTION__); + printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); return; } @@ -1705,14 +1705,8 @@ static int omap2_dma_handle_ch(int ch) status = OMAP_DMA_CSR_REG(ch); } - if (likely(dma_chan[ch].callback != NULL)) { - if (dma_chan[ch].chain_id != -1) - dma_chan[ch].callback(dma_chan[ch].chain_id, status, - dma_chan[ch].data); - else - dma_chan[ch].callback(ch, status, dma_chan[ch].data); - - } + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, status, dma_chan[ch].data); OMAP_DMA_CSR_REG(ch) = status; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index e719d0eeb5c8..302ad8dff2cb 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -268,7 +268,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) { spin_unlock_irqrestore(&dm_timer_lock, flags); printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n", - __FILE__, __LINE__, __FUNCTION__, id); + __FILE__, __LINE__, __func__, id); dump_stack(); return NULL; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 56f4d1394d56..66a1455595f4 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -333,13 +333,14 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) void omap_set_gpio_direction(int gpio, int is_input) { struct gpio_bank *bank; + unsigned long flags; if (check_gpio(gpio) < 0) return; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); _set_gpio_direction(bank, get_gpio_index(gpio), is_input); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) @@ -406,13 +407,14 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) void omap_set_gpio_dataout(int gpio, int enable) { struct gpio_bank *bank; + unsigned long flags; if (check_gpio(gpio) < 0) return; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); _set_gpio_dataout(bank, get_gpio_index(gpio), enable); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } int omap_get_gpio_datain(int gpio) @@ -624,6 +626,7 @@ static int gpio_irq_type(unsigned irq, unsigned type) struct gpio_bank *bank; unsigned gpio; int retval; + unsigned long flags; if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE) gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); @@ -642,13 +645,13 @@ static int gpio_irq_type(unsigned irq, unsigned type) return -EINVAL; bank = get_irq_chip_data(irq); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); if (retval == 0) { irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; irq_desc[irq].status |= type; } - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return retval; } @@ -830,11 +833,13 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena */ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) { + unsigned long flags; + switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX case METHOD_MPUIO: case METHOD_GPIO_1610: - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); if (enable) { bank->suspend_wakeup |= (1 << gpio); enable_irq_wake(bank->irq); @@ -842,7 +847,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) disable_irq_wake(bank->irq); bank->suspend_wakeup &= ~(1 << gpio); } - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -853,7 +858,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) (bank - gpio_bank) * 32 + gpio); return -EINVAL; } - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); if (enable) { bank->suspend_wakeup |= (1 << gpio); enable_irq_wake(bank->irq); @@ -861,7 +866,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) disable_irq_wake(bank->irq); bank->suspend_wakeup &= ~(1 << gpio); } - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif default: @@ -897,16 +902,17 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable) int omap_request_gpio(int gpio) { struct gpio_bank *bank; + unsigned long flags; if (check_gpio(gpio) < 0) return -EINVAL; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) { printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio); dump_stack(); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return -1; } bank->reserved_map |= (1 << get_gpio_index(gpio)); @@ -925,7 +931,7 @@ int omap_request_gpio(int gpio) __raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg); } #endif - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; } @@ -933,15 +939,16 @@ int omap_request_gpio(int gpio) void omap_free_gpio(int gpio) { struct gpio_bank *bank; + unsigned long flags; if (check_gpio(gpio) < 0) return; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) { printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio); dump_stack(); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return; } #ifdef CONFIG_ARCH_OMAP16XX @@ -960,7 +967,7 @@ void omap_free_gpio(int gpio) #endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); _reset_gpio(bank, gpio); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } /* @@ -1194,11 +1201,12 @@ static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t me { struct gpio_bank *bank = platform_get_drvdata(pdev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; + unsigned long flags; - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); bank->saved_wakeup = __raw_readl(mask_reg); __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; } @@ -1207,10 +1215,11 @@ static int omap_mpuio_resume_early(struct platform_device *pdev) { struct gpio_bank *bank = platform_get_drvdata(pdev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; + unsigned long flags; - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); __raw_writel(bank->saved_wakeup, mask_reg); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; } @@ -1277,6 +1286,11 @@ static struct clk *gpio_fclks[OMAP34XX_NR_GPIOS]; static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif +/* This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + static int __init _omap_gpio_init(void) { int i; @@ -1450,6 +1464,7 @@ static int __init _omap_gpio_init(void) #endif for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + gpio_count; j++) { + lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); set_irq_chip_data(j, bank); if (bank_is_mpuio(bank)) set_irq_chip(j, &mpuio_irq_chip); @@ -1489,6 +1504,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) void __iomem *wake_status; void __iomem *wake_clear; void __iomem *wake_set; + unsigned long flags; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX @@ -1509,11 +1525,11 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) continue; } - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); bank->saved_wakeup = __raw_readl(wake_status); __raw_writel(0xffffffff, wake_clear); __raw_writel(bank->suspend_wakeup, wake_set); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } return 0; @@ -1530,6 +1546,7 @@ static int omap_gpio_resume(struct sys_device *dev) struct gpio_bank *bank = &gpio_bank[i]; void __iomem *wake_clear; void __iomem *wake_set; + unsigned long flags; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX @@ -1548,10 +1565,10 @@ static int omap_gpio_resume(struct sys_device *dev) continue; } - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); __raw_writel(0xffffffff, wake_clear); __raw_writel(bank->saved_wakeup, wake_set); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } return 0; diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index ac9ff1666fcc..60f162dc4fad 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -130,8 +130,8 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) dmadbg_dumpregs(fname, line, chan, &state); } -#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan)) -#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan)) +#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan)) +#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan)) #else #define dbg_showregs(chan) do { } while(0) #define dbg_showchan(chan) do { } while(0) @@ -403,7 +403,7 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { pr_debug("%s: buff not yet loaded, no more todo\n", - __FUNCTION__); + __func__); } else { chan->load_state = S3C2410_DMALOAD_1RUNNING; s3c2410_dma_loadbuffer(chan, chan->next); @@ -463,16 +463,16 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, return -EINVAL; pr_debug("%s: id=%p, data=%08x, size=%d\n", - __FUNCTION__, id, (unsigned int)data, size); + __func__, id, (unsigned int)data, size); buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); if (buf == NULL) { pr_debug("%s: out of memory (%ld alloc)\n", - __FUNCTION__, (long)sizeof(*buf)); + __func__, (long)sizeof(*buf)); return -ENOMEM; } - //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); + //pr_debug("%s: new buffer %p\n", __func__, buf); //dbg_showchan(chan); buf->next = NULL; @@ -486,18 +486,18 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, if (chan->curr == NULL) { /* we've got nothing loaded... */ pr_debug("%s: buffer %p queued onto empty channel\n", - __FUNCTION__, buf); + __func__, buf); chan->curr = buf; chan->end = buf; chan->next = NULL; } else { pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", - chan->number, __FUNCTION__, buf); + chan->number, __func__, buf); if (chan->end == NULL) pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", - chan->number, __FUNCTION__, chan); + chan->number, __func__, chan); chan->end->next = buf; chan->end = buf; @@ -572,7 +572,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __FUNCTION__); + chan->number, __func__); return; } break; @@ -658,7 +658,7 @@ s3c2410_dma_irq(int irq, void *devpw) if (buf->magic != BUF_MAGIC) { printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n", - chan->number, __FUNCTION__, buf); + chan->number, __func__, buf); return IRQ_HANDLED; } @@ -692,7 +692,7 @@ s3c2410_dma_irq(int irq, void *devpw) if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __FUNCTION__); + chan->number, __func__); return IRQ_HANDLED; } @@ -759,7 +759,7 @@ int s3c2410_dma_request(unsigned int channel, if (!chan->irq_claimed) { pr_debug("dma%d: %s : requesting irq %d\n", - channel, __FUNCTION__, chan->irq); + channel, __func__, chan->irq); chan->irq_claimed = 1; local_irq_restore(flags); @@ -786,7 +786,7 @@ int s3c2410_dma_request(unsigned int channel, /* need to setup */ - pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan); + pr_debug("%s: channel initialised, %p\n", __func__, chan); return chan->number | DMACH_LOW_LEVEL; } @@ -823,7 +823,7 @@ int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) if (chan->state != S3C2410_DMA_IDLE) { pr_debug("%s: need to stop dma channel %p\n", - __FUNCTION__, chan); + __func__, chan); /* possibly flush the channel */ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); @@ -852,7 +852,7 @@ static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) unsigned long flags; unsigned long tmp; - pr_debug("%s:\n", __FUNCTION__); + pr_debug("%s:\n", __func__); dbg_showchan(chan); @@ -907,14 +907,14 @@ static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) struct s3c2410_dma_buf *buf, *next; unsigned long flags; - pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number); + pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number); dbg_showchan(chan); local_irq_save(flags); if (chan->state != S3C2410_DMA_IDLE) { - pr_debug("%s: stopping channel...\n", __FUNCTION__ ); + pr_debug("%s: stopping channel...\n", __func__ ); s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); } @@ -929,7 +929,7 @@ static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) next = buf->next; pr_debug("%s: free buffer %p, next %p\n", - __FUNCTION__, buf, buf->next); + __func__, buf, buf->next); s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT); s3c2410_dma_freebuf(buf); @@ -976,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { pr_debug("%s: buff not yet loaded, no more todo\n", - __FUNCTION__); + __func__); } else { chan->load_state = S3C2410_DMALOAD_1RUNNING; s3c2410_dma_loadbuffer(chan, chan->next); @@ -1050,16 +1050,16 @@ int s3c2410_dma_config(dmach_t channel, struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", - __FUNCTION__, channel, xferunit, dcon); + __func__, channel, xferunit, dcon); if (chan == NULL) return -EINVAL; - pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon); + pr_debug("%s: Initial dcon is %08x\n", __func__, dcon); dcon |= chan->dcon & dma_sel.dcon_mask; - pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon); + pr_debug("%s: New dcon is %08x\n", __func__, dcon); switch (xferunit) { case 1: @@ -1075,14 +1075,14 @@ int s3c2410_dma_config(dmach_t channel, break; default: - pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit); + pr_debug("%s: bad transfer size %d\n", __func__, xferunit); return -EINVAL; } dcon |= S3C2410_DCON_HWTRIG; dcon |= S3C2410_DCON_INTREQ; - pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon); + pr_debug("%s: dcon now %08x\n", __func__, dcon); chan->dcon = dcon; chan->xfer_unit = xferunit; @@ -1099,7 +1099,7 @@ int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) if (chan == NULL) return -EINVAL; - pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); + pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags); chan->flags = flags; @@ -1120,7 +1120,7 @@ int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) if (chan == NULL) return -EINVAL; - pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); + pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn); chan->op_fn = rtn; @@ -1136,7 +1136,7 @@ int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) if (chan == NULL) return -EINVAL; - pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); + pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn); chan->callback_fn = rtn; @@ -1170,7 +1170,7 @@ int s3c2410_dma_devconfig(int channel, return -EINVAL; pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", - __FUNCTION__, (int)source, hwcfg, devaddr); + __func__, (int)source, hwcfg, devaddr); chan->source = source; chan->dev_addr = devaddr; @@ -1180,7 +1180,7 @@ int s3c2410_dma_devconfig(int channel, case S3C2410_DMASRC_HW: /* source is hardware */ pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", - __FUNCTION__, devaddr, hwcfg); + __func__, devaddr, hwcfg); dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3); dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr); dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); @@ -1190,8 +1190,8 @@ int s3c2410_dma_devconfig(int channel, case S3C2410_DMASRC_MEM: /* source is memory */ - pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n", - __FUNCTION__, devaddr, hwcfg); + pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n", + __func__, devaddr, hwcfg); dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0)); dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr); dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); |
