summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig3
-rw-r--r--arch/arm/configs/imx_v4_v5_defconfig1
-rw-r--r--arch/arm/include/asm/unwind.h16
-rw-r--r--arch/arm/kernel/perf_event.c3
-rw-r--r--arch/arm/kernel/setup.c14
-rw-r--r--arch/arm/kernel/unwind.c129
-rw-r--r--arch/arm/mach-exynos/mct.c13
-rw-r--r--arch/arm/mach-imx/Kconfig1
-rw-r--r--arch/arm/mach-imx/mach-apf9328.c10
-rw-r--r--arch/arm/mach-imx/mach-mx31_3ds.c2
-rw-r--r--arch/arm/mach-mx5/board-mx51_babbage.c2
-rw-r--r--arch/arm/mach-mx5/board-mx53_evk.c2
-rw-r--r--arch/arm/mach-mx5/board-mx53_loco.c2
-rw-r--r--arch/arm/mach-mx5/board-mx53_smd.c2
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c2
-rw-r--r--arch/arm/mach-omap2/mcbsp.c6
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c1
-rw-r--r--arch/arm/plat-mxc/cpufreq.c1
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx25.h4
-rw-r--r--arch/arm/plat-mxc/pwm.c7
-rw-r--r--arch/arm/plat-samsung/dev-backlight.c1
21 files changed, 141 insertions, 81 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index abba5b8c9d74..a02385b2444c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H
be avoided when possible.
config PHYS_OFFSET
- hex "Physical address of main memory"
+ hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+ default DRAM_BASE if !MMU
help
Please provide the physical address corresponding to the
location of main memory in your system.
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 11a4192197c8..fccb4703bacb 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -67,7 +67,6 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index a5edf421005c..d1c3f3a71c94 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -30,14 +30,15 @@ enum unwind_reason_code {
};
struct unwind_idx {
- unsigned long addr;
+ unsigned long addr_offset;
unsigned long insn;
};
struct unwind_table {
struct list_head list;
- struct unwind_idx *start;
- struct unwind_idx *stop;
+ const struct unwind_idx *start;
+ const struct unwind_idx *origin;
+ const struct unwind_idx *stop;
unsigned long begin_addr;
unsigned long end_addr;
};
@@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start,
extern void unwind_table_del(struct unwind_table *tab);
extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
-#ifdef CONFIG_ARM_UNWIND
-extern int __init unwind_init(void);
-#else
-static inline int __init unwind_init(void)
-{
- return 0;
-}
-#endif
-
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_ARM_UNWIND
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index a4f192cc51b2..5bb91bf3d47f 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -639,6 +639,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = {
static int __devinit armpmu_device_probe(struct platform_device *pdev)
{
+ if (!cpu_pmu)
+ return -ENODEV;
+
cpu_pmu->plat_device = pdev;
return 0;
}
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 5c7094e8f6e9..095d6611c84e 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -902,8 +902,6 @@ void __init setup_arch(char **cmdline_p)
{
struct machine_desc *mdesc;
- unwind_init();
-
setup_processor();
mdesc = setup_machine_fdt(__atags_pointer);
if (!mdesc)
@@ -911,6 +909,12 @@ void __init setup_arch(char **cmdline_p)
machine_desc = mdesc;
machine_name = mdesc->name;
+#ifdef CONFIG_ZONE_DMA
+ if (mdesc->dma_zone_size) {
+ extern unsigned long arm_dma_zone_size;
+ arm_dma_zone_size = mdesc->dma_zone_size;
+ }
+#endif
if (mdesc->restart_mode)
reboot_setup(&mdesc->restart_mode);
@@ -945,12 +949,6 @@ void __init setup_arch(char **cmdline_p)
tcm_init();
-#ifdef CONFIG_ZONE_DMA
- if (mdesc->dma_zone_size) {
- extern unsigned long arm_dma_zone_size;
- arm_dma_zone_size = mdesc->dma_zone_size;
- }
-#endif
#ifdef CONFIG_MULTI_IRQ_HANDLER
handle_arch_irq = mdesc->handle_irq;
#endif
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index e7e8365795c3..00df012c4678 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
struct unwind_ctrl_block {
unsigned long vrs[16]; /* virtual register set */
- unsigned long *insn; /* pointer to the current instructions word */
+ const unsigned long *insn; /* pointer to the current instructions word */
int entries; /* number of entries left to interpret */
int byte; /* current byte number in the instructions word */
};
@@ -83,8 +83,9 @@ enum regs {
PC = 15
};
-extern struct unwind_idx __start_unwind_idx[];
-extern struct unwind_idx __stop_unwind_idx[];
+extern const struct unwind_idx __start_unwind_idx[];
+static const struct unwind_idx *__origin_unwind_idx;
+extern const struct unwind_idx __stop_unwind_idx[];
static DEFINE_SPINLOCK(unwind_lock);
static LIST_HEAD(unwind_tables);
@@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables);
})
/*
- * Binary search in the unwind index. The entries entries are
+ * Binary search in the unwind index. The entries are
* guaranteed to be sorted in ascending order by the linker.
+ *
+ * start = first entry
+ * origin = first entry with positive offset (or stop if there is no such entry)
+ * stop - 1 = last entry
*/
-static struct unwind_idx *search_index(unsigned long addr,
- struct unwind_idx *first,
- struct unwind_idx *last)
+static const struct unwind_idx *search_index(unsigned long addr,
+ const struct unwind_idx *start,
+ const struct unwind_idx *origin,
+ const struct unwind_idx *stop)
{
- pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+ unsigned long addr_prel31;
+
+ pr_debug("%s(%08lx, %p, %p, %p)\n",
+ __func__, addr, start, origin, stop);
+
+ /*
+ * only search in the section with the matching sign. This way the
+ * prel31 numbers can be compared as unsigned longs.
+ */
+ if (addr < (unsigned long)start)
+ /* negative offsets: [start; origin) */
+ stop = origin;
+ else
+ /* positive offsets: [origin; stop) */
+ start = origin;
+
+ /* prel31 for address relavive to start */
+ addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
- if (addr < first->addr) {
+ while (start < stop - 1) {
+ const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+ /*
+ * As addr_prel31 is relative to start an offset is needed to
+ * make it relative to mid.
+ */
+ if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
+ mid->addr_offset)
+ stop = mid;
+ else {
+ /* keep addr_prel31 relative to start */
+ addr_prel31 -= ((unsigned long)mid -
+ (unsigned long)start);
+ start = mid;
+ }
+ }
+
+ if (likely(start->addr_offset <= addr_prel31))
+ return start;
+ else {
pr_warning("unwind: Unknown symbol address %08lx\n", addr);
return NULL;
- } else if (addr >= last->addr)
- return last;
+ }
+}
- while (first < last - 1) {
- struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+static const struct unwind_idx *unwind_find_origin(
+ const struct unwind_idx *start, const struct unwind_idx *stop)
+{
+ pr_debug("%s(%p, %p)\n", __func__, start, stop);
+ while (start < stop) {
+ const struct unwind_idx *mid = start + ((stop - start) >> 1);
- if (addr < mid->addr)
- last = mid;
+ if (mid->addr_offset >= 0x40000000)
+ /* negative offset */
+ start = mid + 1;
else
- first = mid;
+ /* positive offset */
+ stop = mid;
}
-
- return first;
+ pr_debug("%s -> %p\n", __func__, stop);
+ return stop;
}
-static struct unwind_idx *unwind_find_idx(unsigned long addr)
+static const struct unwind_idx *unwind_find_idx(unsigned long addr)
{
- struct unwind_idx *idx = NULL;
+ const struct unwind_idx *idx = NULL;
unsigned long flags;
pr_debug("%s(%08lx)\n", __func__, addr);
- if (core_kernel_text(addr))
+ if (core_kernel_text(addr)) {
+ if (unlikely(!__origin_unwind_idx))
+ __origin_unwind_idx =
+ unwind_find_origin(__start_unwind_idx,
+ __stop_unwind_idx);
+
/* main unwind table */
idx = search_index(addr, __start_unwind_idx,
- __stop_unwind_idx - 1);
- else {
+ __origin_unwind_idx,
+ __stop_unwind_idx);
+ } else {
/* module unwind tables */
struct unwind_table *table;
@@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
if (addr >= table->begin_addr &&
addr < table->end_addr) {
idx = search_index(addr, table->start,
- table->stop - 1);
+ table->origin,
+ table->stop);
/* Move-to-front to exploit common traces */
list_move(&table->list, &unwind_tables);
break;
@@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
int unwind_frame(struct stackframe *frame)
{
unsigned long high, low;
- struct unwind_idx *idx;
+ const struct unwind_idx *idx;
struct unwind_ctrl_block ctrl;
/* only go to a higher address on the stack */
@@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
unsigned long text_size)
{
unsigned long flags;
- struct unwind_idx *idx;
struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
if (!tab)
return tab;
- tab->start = (struct unwind_idx *)start;
- tab->stop = (struct unwind_idx *)(start + size);
+ tab->start = (const struct unwind_idx *)start;
+ tab->stop = (const struct unwind_idx *)(start + size);
+ tab->origin = unwind_find_origin(tab->start, tab->stop);
tab->begin_addr = text_addr;
tab->end_addr = text_addr + text_size;
- /* Convert the symbol addresses to absolute values */
- for (idx = tab->start; idx < tab->stop; idx++)
- idx->addr = prel31_to_addr(&idx->addr);
-
spin_lock_irqsave(&unwind_lock, flags);
list_add_tail(&tab->list, &unwind_tables);
spin_unlock_irqrestore(&unwind_lock, flags);
@@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab)
kfree(tab);
}
-
-int __init unwind_init(void)
-{
- struct unwind_idx *idx;
-
- /* Convert the symbol addresses to absolute values */
- for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
- idx->addr = prel31_to_addr(&idx->addr);
-
- pr_debug("unwind: ARM stack unwinding initialised\n");
-
- return 0;
-}
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 97343df8f132..85b5527d0918 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -44,8 +44,6 @@ struct mct_clock_event_device {
char name[10];
};
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
static void exynos4_mct_write(unsigned int value, void *addr)
{
void __iomem *stat_addr;
@@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void)
}
#ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
/* Clock event handling */
static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
{
@@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
void local_timer_stop(struct clock_event_device *evt)
{
+ unsigned int cpu = smp_processor_id();
evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
if (mct_int_type == MCT_INT_SPI)
- disable_irq(evt->irq);
+ if (cpu == 0)
+ remove_irq(evt->irq, &mct_tick0_event_irq);
+ else
+ remove_irq(evt->irq, &mct_tick1_event_irq);
else
disable_percpu_irq(IRQ_MCT_LOCALTIMER);
}
@@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void)
clk_rate = clk_get_rate(mct_clk);
+#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
int err;
@@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void)
WARN(err, "MCT: can't request IRQ %d (%d)\n",
IRQ_MCT_LOCALTIMER, err);
}
+#endif /* CONFIG_LOCAL_TIMERS */
}
static void __init exynos4_timer_init(void)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c44aa974e79c..d0a27303edb8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -98,6 +98,7 @@ config MACH_SCB9328
config MACH_APF9328
bool "APF9328"
select SOC_IMX1
+ select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
help
Say Yes here if you are using the Armadeus APF9328 development board
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 1e486e67dabb..c71dbcc37b11 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/dm9000.h>
+#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -41,6 +42,9 @@ static const int apf9328_pins[] __initconst = {
PB29_PF_UART2_RTS,
PB30_PF_UART2_TXD,
PB31_PF_UART2_RXD,
+ /* I2C */
+ PA15_PF_I2C_SDA,
+ PA16_PF_I2C_SCL,
};
/*
@@ -103,6 +107,10 @@ static const struct imxuart_platform_data uart1_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
+static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
+ .bitrate = 100000,
+};
+
static struct platform_device *devices[] __initdata = {
&apf9328_flash_device,
&dm9000x_device,
@@ -119,6 +127,8 @@ static void __init apf9328_init(void)
imx1_add_imx_uart0(NULL);
imx1_add_imx_uart1(&uart1_pdata);
+ imx1_add_imx_i2c(&apf9328_i2c_data);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index b8c54b840185..00bb308ce1cd 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -492,7 +492,7 @@ static struct mc13xxx_platform_data mc13783_pdata = {
.regulators = mx31_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
},
- .flags = MC13XXX_USE_TOUCHSCREEN,
+ .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
};
/* SPI */
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 5c837603ff0f..24994bb52147 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void)
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
- PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+ PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
imx51_soc_init();
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 6bea31ab8f85..64bbfcea6f35 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void)
gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_evk_fec_pdata = {
+static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 7678f7734db6..237bdecd9331 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void)
gpio_set_value(LOCO_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_loco_fec_data = {
+static const struct fec_platform_data mx53_loco_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 59c0845eb4a6..d42132a80e8f 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void)
gpio_set_value(SMD_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_smd_fec_data = {
+static const struct fec_platform_data mx53_smd_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e9eff00cddd4..d67bcdf724d7 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -198,7 +198,7 @@ static struct platform_device rx51_charger_device = {
static void __init rx51_charger_init(void)
{
WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
- GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+ GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
platform_device_register(&rx51_charger_device);
}
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 292eee3be15f..28fcb27005d2 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
pdata->reg_size = 4;
pdata->has_ccr = true;
}
+ pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+ if (id == 1)
+ pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
@@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
name, oh->name);
return PTR_ERR(pdev);
}
- pdata->set_clk_src = omap2_mcbsp_set_clk_src;
- if (id == 1)
- pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 4ca77c41d499..3ac9e57d9705 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -274,6 +274,7 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
static struct platform_pwm_backlight_data smdkv210_bl_data = {
.pwm_id = 3,
+ .pwm_period_ns = 1000,
};
static void __init smdkv210_map_io(void)
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 74aac96cda20..adbff706ef6f 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -17,6 +17,7 @@
* the CPU clock speed on the fly.
*/
+#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/err.h>
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index bf64e1e594ed..f0726d48df22 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -265,16 +265,20 @@
#define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
#define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__CSPI3_MOSI IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D3__CSPI3_MISO IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL)
#define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
#define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__CSPI3_SCLK IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D5__CSPI3_RDY IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42d74ea59084..845de59f07ed 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,9 @@
#define MX3_PWMSAR 0x0C /* PWM Sample Register */
#define MX3_PWMPR 0x10 /* PWM Period Register */
#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN (1 << 24)
+#define MX3_PWMCR_WAITEN (1 << 23)
+#define MX3_PWMCR_DBGEN (1 << 22)
#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_EN (1 << 0)
@@ -77,7 +80,9 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
- cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+ cr = MX3_PWMCR_PRESCALER(prescale) |
+ MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+ MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
if (cpu_is_mx25())
cr |= MX3_PWMCR_CLKSRC_IPG;
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index e657305644cc..a976c023b286 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/pwm_backlight.h>
-#include <linux/slab.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
OpenPOWER on IntegriCloud