diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/mach-kirkwood/Kconfig | 7 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/dockstar-setup.c | 111 |
3 files changed, 0 insertions, 119 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 60d0896bcc26..85a567720fe8 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -12,13 +12,6 @@ config MACH_D2NET_V2 Say 'Y' here if you want your kernel to support the LaCie d2 Network v2 NAS. -config MACH_DOCKSTAR - bool "Seagate FreeAgent DockStar" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - Seagate FreeAgent DockStar. - config MACH_ESATA_SHEEVAPLUG bool "Marvell eSATA SheevaPlug Reference Board" select KIRKWOOD_LEGACY diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 88e2dd33ce2f..646b77e650ce 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,7 +1,6 @@ obj-y += common.o pcie.o obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c deleted file mode 100644 index 060ccf9cb63f..000000000000 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * arch/arm/mach-kirkwood/dockstar-setup.c - * - * Seagate FreeAgent DockStar Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mtd/partitions.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition dockstar_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data dockstar_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct gpio_led dockstar_led_pins[] = { - { - .name = "dockstar:green:health", - .default_trigger = "default-on", - .gpio = 46, - .active_low = 1, - }, - { - .name = "dockstar:orange:misc", - .default_trigger = "none", - .gpio = 47, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dockstar_led_data = { - .leds = dockstar_led_pins, - .num_leds = ARRAY_SIZE(dockstar_led_pins), -}; - -static struct platform_device dockstar_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dockstar_led_data, - } -}; - -static unsigned int dockstar_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED green */ - MPP47_GPIO, /* LED orange */ - 0 -}; - -static void __init dockstar_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - - /* setup gpio pin select */ - kirkwood_mpp_conf(dockstar_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't set up GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - - kirkwood_ge00_init(&dockstar_ge00_data); - - platform_device_register(&dockstar_leds); -} - -MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") - .atag_offset = 0x100, - .init_machine = dockstar_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END |