diff options
Diffstat (limited to 'arch/arm')
770 files changed, 21944 insertions, 15241 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ccb6c0c71521..1e31dac36a5f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -15,6 +15,7 @@ config ARM select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP select GENERIC_SMP_IDLE_THREAD + select GENERIC_IDLE_POLL_SETUP select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HARDIRQS_SW_RESEND @@ -58,6 +59,7 @@ config ARM select CLONE_BACKWARDS select OLD_SIGSUSPEND3 select OLD_SIGACTION + select HAVE_CONTEXT_TRACKING help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -361,37 +363,6 @@ config ARCH_AT91 This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. -config ARCH_BCM2835 - bool "Broadcom BCM2835 family" - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_ERRATA_411920 - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select CLKSRC_OF - select COMMON_CLK - select CPU_V6 - select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select PINCTRL - select PINCTRL_BCM2835 - select SPARSE_IRQ - select USE_OF - help - This enables support for the Broadcom BCM2835 SoC. This SoC is - use in the Raspberry Pi, and Roku 2 devices. - -config ARCH_CNS3XXX - bool "Cavium Networks CNS3XXX family" - select ARM_GIC - select CPU_V6K - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI - help - Support for Cavium Networks CNS3XXX platform. - config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select ARCH_REQUIRE_GPIOLIB @@ -410,25 +381,11 @@ config ARCH_GEMINI bool "Cortina Systems Gemini" select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_GPIO_H select CPU_FA526 help Support for the Cortina Systems Gemini family SoCs -config ARCH_SIRF - bool "CSR SiRF" - select ARCH_REQUIRE_GPIOLIB - select AUTO_ZRELADDR - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 - select NO_IOPORT - select PINCTRL - select PINCTRL_SIRF - select USE_OF - help - Support for CSR SiRFprimaII/Marco/Polo platforms - config ARCH_EBSA110 bool "EBSA-110" select ARCH_USES_GETTIMEOFFSET @@ -468,21 +425,6 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_MXS - bool "Freescale MXS-based" - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select HAVE_CLK_PREPARE - select MULTI_IRQ_HANDLER - select PINCTRL - select SPARSE_IRQ - select USE_OF - help - Support for Freescale MXS-based family of processors - config ARCH_NETX bool "Hilscher NetX based" select ARM_VIC @@ -492,14 +434,6 @@ config ARCH_NETX help This enables support for systems based on the Hilscher NetX Soc -config ARCH_H720X - bool "Hynix HMS720x-based" - select ARCH_USES_GETTIMEOFFSET - select CPU_ARM720T - select ISA_DMA_API - help - This enables support for systems based on the Hynix HMS720x - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -549,6 +483,8 @@ config ARCH_IXP4XX select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select NEED_MACH_IO_H + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC help Support for Intel's IXP4XX (XScale) family of processors. @@ -661,25 +597,6 @@ config ARCH_LPC32XX help Support for the NXP LPC32XX family of processors -config ARCH_TEGRA - bool "NVIDIA Tegra" - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select SOC_BUS - select SPARSE_IRQ - select USE_OF - help - This enables support for NVIDIA Tegra based systems (Tegra APX, - Tegra 6xx and Tegra 2 series). - config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU @@ -717,6 +634,8 @@ config ARCH_SHMOBILE bool "Renesas SH-Mobile / R-Mobile" select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CLK select HAVE_MACH_CLKDEV select HAVE_SMP @@ -909,51 +828,6 @@ config ARCH_U300 help Support for ST-Ericsson U300 series mobile platforms. -config ARCH_U8500 - bool "ST-Ericsson U8500 Series" - depends on MMU - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select CLKDEV_LOOKUP - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select SPARSE_IRQ - help - Support for ST-Ericsson's Ux500 architecture - -config ARCH_NOMADIK - bool "STMicroelectronics Nomadik" - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_VIC - select CLKSRC_NOMADIK_MTU - select COMMON_CLK - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 - select USE_OF - select PINCTRL - select PINCTRL_STN8815 - select SPARSE_IRQ - help - Support for the Nomadik platform by ST-Ericsson - -config PLAT_SPEAR - bool "ST SPEAr" - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -1045,6 +919,8 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm/Kconfig" +source "arch/arm/mach-bcm2835/Kconfig" + source "arch/arm/mach-clps711x/Kconfig" source "arch/arm/mach-cns3xxx/Kconfig" @@ -1059,8 +935,6 @@ source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-gemini/Kconfig" -source "arch/arm/mach-h720x/Kconfig" - source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-integrator/Kconfig" @@ -1112,7 +986,7 @@ source "arch/arm/plat-samsung/Kconfig" source "arch/arm/mach-socfpga/Kconfig" -source "arch/arm/plat-spear/Kconfig" +source "arch/arm/mach-spear/Kconfig" source "arch/arm/mach-s3c24xx/Kconfig" @@ -1181,7 +1055,6 @@ config PLAT_VERSATILE config ARM_TIMER_SP804 bool select CLKSRC_MMIO - select HAVE_SCHED_CLOCK source arch/arm/mm/Kconfig @@ -1191,9 +1064,9 @@ config ARM_NR_BANKS default 8 config IWMMXT - bool "Enable iWMMXt support" + bool "Enable iWMMXt support" if !CPU_PJ4 depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || ARCH_MMP + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. @@ -1447,6 +1320,16 @@ config ARM_ERRATA_775420 to deadlock. This workaround puts DSB before executing ISB if an abort may occur on cache maintenance. +config ARM_ERRATA_798181 + bool "ARM errata: TLBI/DSB failure on Cortex-A15" + depends on CPU_V7 && SMP + help + On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not + adequately shooting down all use of the old entries. This + option enables the Linux kernel workaround for this erratum + which sends an IPI to the CPUs that are running the same ASID + as the one being invalidated. + endmenu source "arch/arm/common/Kconfig" @@ -1530,7 +1413,6 @@ config SMP depends on GENERIC_CLOCKEVENTS depends on HAVE_SMP depends on MMU - select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP select USE_GENERIC_SMP_HELPERS help This enables support for systems with more than one CPU. If you have @@ -1605,6 +1487,14 @@ config HAVE_ARM_TWD help This options enables support for the ARM timer and watchdog unit +config MCPM + bool "Multi-Cluster Power Management" + depends on CPU_V7 && SMP + help + This option provides the common power management infrastructure + for (multi-)cluster based systems, such as big.LITTLE based + systems. + choice prompt "Memory split" default VMSPLIT_3G @@ -1655,7 +1545,6 @@ config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP default y - select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !CLKSRC_EXYNOS_MCT) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1669,7 +1558,7 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 512 if SOC_OMAP5 - default 355 if ARCH_U8500 + default 392 if ARCH_U8500 default 352 if ARCH_VT8500 default 288 if ARCH_SUNXI default 264 if MACH_H4700 @@ -1693,8 +1582,9 @@ config SCHED_HRTICK def_bool HIGH_RES_TIMERS config THUMB2_KERNEL - bool "Compile the kernel in Thumb-2 mode" + bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY depends on CPU_V7 && !CPU_V6 && !CPU_V6K + default y if CPU_THUMBONLY select AEABI select ARM_ASM_UNIFIED select ARM_UNWIND @@ -2160,40 +2050,8 @@ endmenu menu "CPU Power Management" if ARCH_HAS_CPUFREQ - source "drivers/cpufreq/Kconfig" -config CPU_FREQ_IMX - tristate "CPUfreq driver for i.MX CPUs" - depends on ARCH_MXC && CPU_FREQ - select CPU_FREQ_TABLE - help - This enables the CPUfreq driver for i.MX CPUs. - -config CPU_FREQ_SA1100 - bool - -config CPU_FREQ_SA1110 - bool - -config CPU_FREQ_INTEGRATOR - tristate "CPUfreq driver for ARM Integrator CPUs" - depends on ARCH_INTEGRATOR && CPU_FREQ - default y - help - This enables the CPUfreq driver for ARM Integrator CPUs. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say Y. - -config CPU_FREQ_PXA - bool - depends on CPU_FREQ && ARCH_PXA && PXA25x - default y - select CPU_FREQ_DEFAULT_GOV_USERSPACE - select CPU_FREQ_TABLE - config CPU_FREQ_S3C bool help diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 59ce26afdcc5..5c8e59f6a6f4 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -89,6 +89,10 @@ choice bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 + config DEBUG_BCM2835 + bool "Kernel low-level debugging on BCM2835 PL011 UART" + depends on ARCH_BCM2835 + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -103,6 +107,13 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. + config DEBUG_CNS3XXX + bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" + depends on ARCH_CNS3XXX + help + Say Y here if you want the debug print routines to direct + their output to the CNS3xxx UART0. + config DEBUG_DAVINCI_DA8XX_UART1 bool "Kernel low-level debugging on DaVinci DA8XX using UART1" depends on ARCH_DAVINCI_DA8XX @@ -298,6 +309,13 @@ choice Say Y here if you want kernel low-level debugging support on MVEBU based platforms. + config DEBUG_NOMADIK_UART + bool "Kernel low-level debugging messages via NOMADIK UART" + depends on ARCH_NOMADIK + help + Say Y here if you want kernel low-level debugging support + on NOMADIK based platforms. + config DEBUG_OMAP2PLUS_UART bool "Kernel low-level debugging messages via OMAP2PLUS UART" depends on ARCH_OMAP2PLUS @@ -418,6 +436,13 @@ choice Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFmarco devices. + config DEBUG_UX500_UART + depends on ARCH_U8500 + bool "Use Ux500 UART for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on Ux500 based platforms. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -587,6 +612,8 @@ endchoice config DEBUG_LL_INCLUDE string + default "debug/bcm2835.S" if DEBUG_BCM2835 + default "debug/cns3xxx.S" if DEBUG_CNS3XXX default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ @@ -599,17 +626,32 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6Q_UART default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART + default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART + default "debug/nomadik.S" if DEBUG_NOMADIK_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART + default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/ux500.S" if DEBUG_UX500_UART default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" +config DEBUG_UNCOMPRESS + bool + default y if ARCH_MULTIPLATFORM && DEBUG_LL && \ + !DEBUG_OMAP2PLUS_UART && \ + !DEBUG_TEGRA_UART + +config UNCOMPRESS_INCLUDE + string + default "debug/uncompress.h" if ARCH_MULTIPLATFORM + default "mach/uncompress.h" + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ee4605f400b0..47374085befd 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -147,7 +147,6 @@ machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_GEMINI) += gemini -machine-$(CONFIG_ARCH_H720X) += h720x machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_INTEGRATOR) += integrator machine-$(CONFIG_ARCH_IOP13XX) += iop13xx @@ -191,9 +190,7 @@ machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 machine-$(CONFIG_FOOTBRIDGE) += footbridge machine-$(CONFIG_ARCH_SOCFPGA) += socfpga -machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx -machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx -machine-$(CONFIG_MACH_SPEAR600) += spear6xx +machine-$(CONFIG_PLAT_SPEAR) += spear machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_ARCH_SUNXI) += sunxi @@ -207,7 +204,6 @@ plat-$(CONFIG_PLAT_ORION) += orion plat-$(CONFIG_PLAT_PXA) += pxa plat-$(CONFIG_PLAT_S3C24XX) += samsung plat-$(CONFIG_PLAT_S5P) += samsung -plat-$(CONFIG_PLAT_SPEAR) += spear plat-$(CONFIG_PLAT_VERSATILE) += versatile ifeq ($(CONFIG_ARCH_EBSA110),y) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index afed28e37ea5..3580d57ea218 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -24,6 +24,9 @@ endif AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) HEAD = head.o OBJS += misc.o decompress.o +ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y) +OBJS += debug.o +endif FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c # string library code (-Os is enforced to keep it much smaller) diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S new file mode 100644 index 000000000000..6e8382d5b7a4 --- /dev/null +++ b/arch/arm/boot/compressed/debug.S @@ -0,0 +1,12 @@ +#include <linux/linkage.h> +#include <asm/assembler.h> + +#include CONFIG_DEBUG_LL_INCLUDE + +ENTRY(putc) + addruart r1, r2, r3 + waituart r3, r1 + senduart r0, r1 + busyuart r3, r1 + mov pc, lr +ENDPROC(putc) diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index df899834d84e..31bd43b82095 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -25,13 +25,7 @@ unsigned int __machine_arch_type; static void putstr(const char *ptr); extern void error(char *x); -#ifdef CONFIG_ARCH_MULTIPLATFORM -static inline void putc(int c) {} -static inline void flush(void) {} -static inline void arch_decomp_setup(void) {} -#else -#include <mach/uncompress.h> -#endif +#include CONFIG_UNCOMPRESS_INCLUDE #ifdef CONFIG_DEBUG_ICEDCC diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d3cd880d70b3..55196639211d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -3,6 +3,7 @@ ifeq ($(CONFIG_OF),y) # Keep at91 dtb files sorted alphabetically for each SoC # rm9200 dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb +dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb # sam9260 dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb @@ -26,11 +27,17 @@ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb # sam9n12 dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb # sam9x5 +dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb +# sama5d3 +dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb @@ -90,19 +97,26 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx25-karo-tx25.dtb \ imx25-pdk.dtb \ imx27-apf27.dtb \ + imx27-apf27dev.dtb \ imx27-pdk.dtb \ + imx27-phytec-phycore.dtb \ imx31-bug.dtb \ imx51-apf51.dtb \ + imx51-apf51dev.dtb \ imx51-babbage.dtb \ imx53-ard.dtb \ imx53-evk.dtb \ imx53-mba53.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ + imx6dl-sabreauto.dtb \ + imx6dl-sabresd.dtb \ + imx6dl-wandboard.dtb \ imx6q-arm2.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb + imx6q-sabresd.dtb \ + imx6q-sbc6x.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0957645b73af..91fe4f148f80 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -349,7 +349,7 @@ rx_descs = <64>; mac_control = <0x20>; slaves = <2>; - cpts_active_slave = <0>; + active_slave = <0>; cpts_clock_mult = <0x80000000>; cpts_clock_shift = <29>; reg = <0x4a100000 0x800 diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index e34b280ce6ec..6403acdbb75f 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -94,5 +94,22 @@ spi-max-frequency = <50000000>; }; }; + + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index dd0c57dd9f30..58ee79372206 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -33,6 +33,43 @@ clock-frequency = <600000000>; status = "okay"; }; + + pinctrl { + pwr_led_pin: pwr-led-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; + + stat_led_pins: stat-led-pins { + marvell,pins = "mpp64", "mpp65"; + marvell,function = "gpio"; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led_pin &stat_led_pins>; + + green_pwr_led { + label = "mirabox:green:pwr"; + gpios = <&gpio1 31 1>; + linux,default-trigger = "heartbeat"; + }; + + blue_stat_led { + label = "mirabox:blue:stat"; + gpios = <&gpio2 0 1>; + linux,default-trigger = "cpu0"; + }; + + green_stat_led { + label = "mirabox:green:stat"; + gpios = <&gpio2 1 1>; + default-state = "off"; + }; + }; + mdio { phy0: ethernet-phy@0 { reg = <0>; @@ -54,7 +91,7 @@ }; mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins2>; + pinctrl-0 = <&sdio_pins3>; pinctrl-names = "default"; status = "okay"; /* @@ -70,5 +107,32 @@ usb@d0051000 { status = "okay"; }; + + i2c@d0011000 { + status = "okay"; + clock-frequency = <100000>; + pca9505: pca9505@25 { + compatible = "nxp,pca9505"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x25>; + }; + }; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected on the PCB to a USB 3.0 XHCI controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 070bba4f2585..516dec31b469 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -73,4 +73,15 @@ status = "okay"; }; }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Software Button"; + linux,code = <116>; + gpios = <&gpio0 6 1>; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 5b708208b607..758c4ea90344 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -181,6 +181,51 @@ clocks = <&coreclk 0>; status = "disabled"; }; + + devbus-bootcs@d0010400 { + compatible = "marvell,mvebu-devbus"; + reg = <0xd0010400 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs0@d0010408 { + compatible = "marvell,mvebu-devbus"; + reg = <0xd0010408 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs1@d0010410 { + compatible = "marvell,mvebu-devbus"; + reg = <0xd0010410 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs2@d0010418 { + compatible = "marvell,mvebu-devbus"; + reg = <0xd0010418 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs3@d0010420 { + compatible = "marvell,mvebu-devbus"; + reg = <0xd0010420 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 8188d138020e..18f6eb47cc50 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -59,6 +59,12 @@ "mpp50", "mpp51", "mpp52"; marvell,function = "sd0"; }; + + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { @@ -153,5 +159,63 @@ clocks = <&coreclk 0>; }; + thermal@d0018300 { + compatible = "marvell,armada370-thermal"; + reg = <0xd0018300 0x4 + 0xd0018304 0x4>; + status = "okay"; + }; + + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + reg = <0xd0040000 0x2000>, <0xd0080000 0x2000>; + + reg-names = "pcie0.0", "pcie1.0"; + + ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index e83505e4c236..54cc5bb705fb 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -121,5 +121,38 @@ spi-max-frequency = <20000000>; }; }; + + pcie-controller { + status = "okay"; + + /* + * All 6 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 0, Lane 2 */ + status = "okay"; + }; + pcie@4,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 1c8afe2ffebc..04f28a712b98 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -109,5 +109,55 @@ spi-max-frequency = <108000000>; }; }; + + devbus-bootcs@d0010400 { + status = "okay"; + ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index f56c40599f5b..c2c78459a4d4 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -76,5 +76,109 @@ #interrupts-cells = <2>; interrupts = <87>, <88>, <89>; }; + + /* + * MV78230 has 2 PCIe units Gen2.0: One unit can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0048000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd004c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0042000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index f8f2b787d2b0..885bf229eef7 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -96,5 +96,127 @@ clocks = <&gateclk 1>; status = "disabled"; }; + + /* + * MV78260 has 3 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0048000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd004c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0042000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0082000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 936c25dc32b0..23a5ac4490a8 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -111,5 +111,193 @@ clocks = <&gateclk 1>; status = "disabled"; }; + + /* + * MV78460 has 4 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. Two units are + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 3818a82176a2..9d04f04d4e39 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -139,5 +139,43 @@ usb@d0051000 { status = "okay"; }; + + devbus-bootcs@d0010400 { + status = "okay"; + ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 128 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index ca00d8326c87..29dfeb6d4a26 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -151,5 +151,11 @@ status = "disabled"; }; + thermal@d00182b0 { + compatible = "marvell,armadaxp-thermal"; + reg = <0xd00182b0 0x4 + 0xd00184d0 0x4>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts new file mode 100644 index 000000000000..c7aebba4e8e7 --- /dev/null +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -0,0 +1,171 @@ +/* + * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based) + * + * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>, + * Robert Nelson <robertcnelson@gmail.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g25.dtsi" + +/ { + model = "Acme Systems Aria G25"; + compatible = "acme,ariag25", "atmel,at91sam9x5ek", + "atmel,at91sam9x5", "atmel,at91sam9"; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + serial5 = &uart0; + }; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; + }; + + memory { + /* 128 MB, change this for 256 MB revision */ + reg = <0x20000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + /* N.B. Aria has no SD card detect (CD), assumed present */ + + pinctrl-0 = < + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; + + /* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */ + + usart0: serial@f801c000 { + pinctrl-0 = <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; + status = "okay"; + }; + + usart1: serial@f8020000 { + pinctrl-0 = <&pinctrl_usart1 + /* &pinctrl_usart1_rts */ + /* &pinctrl_usart1_cts */ + >; + status = "okay"; + }; + + usart2: serial@f8024000 { + /* cannot activate RTS2+CTS2, clash with + * ethernet on PB0 and PB1 */ + pinctrl-0 = <&pinctrl_usart2>; + status = "okay"; + }; + + usart3: serial@f8028000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x200>; + interrupts = <8 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3 + /* &pinctrl_usart3_rts */ + /* &pinctrl_usart3_cts */ + >; + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + /* + * following can be overwritten by bootloader: + * for example u-boot 'ftd set' command + */ + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + }; + + uart0: serial@f8040000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8040000 0x200>; + interrupts = <15 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; + }; + + adc0: adc@f804c000 { + status = "okay"; + atmel,adc-channels-used = <0xf>; + atmel,adc-num-channels = <4>; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + w1_0 { + pinctrl_w1_0: w1_0-0 { + atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */ + }; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <3>; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + /* little green LED in middle of Aria G25 module */ + aria_led { + label = "aria_led"; + gpios = <&pioB 8 0>; /* PB8 */ + linux,default-trigger = "heartbeat"; + }; + + }; + + onewire@0 { + compatible = "w1-gpio"; + gpios = <&pioA 21 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_w1_0>; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index b0268a5f4b4e..5d3ed5aafc69 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -29,6 +29,7 @@ gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; ssc0 = &ssc0; ssc1 = &ssc1; ssc2 = &ssc2; @@ -91,6 +92,17 @@ interrupts = <20 4 0 21 4 0 22 4 0>; }; + i2c0: i2c@fffb8000 { + compatible = "atmel,at91rm9200-i2c"; + reg = <0xfffb8000 0x4000>; + interrupts = <12 4 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_twi>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmc0: mmc@fffb4000 { compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; @@ -365,6 +377,20 @@ }; }; + twi { + pinctrl_twi: twi-0 { + atmel,pins = + <0 25 0x1 0x2 /* PA25 periph A with multi drive */ + 0 26 0x1 0x2>; /* PA26 periph A with multi drive */ + }; + + pinctrl_twi_gpio: twi_gpio-0 { + atmel,pins = + <0 25 0x0 0x2 /* PA25 GPIO with multi drive */ + 0 26 0x0 0x2>; /* PA26 GPIO with multi drive */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -500,6 +526,8 @@ i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_twi_gpio>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index cb7bcc51608d..70b5ccbac234 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -158,8 +158,8 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <2 6 0x1 0x1 /* PB6 periph A with pullup */ - 2 7 0x1 0x0>; /* PB7 periph A */ + <1 6 0x1 0x1 /* PB6 periph A with pullup */ + 1 7 0x1 0x0>; /* PB7 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { @@ -194,18 +194,18 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 10 0x1 0x1 /* PB10 periph A with pullup */ - 2 11 0x1 0x0>; /* PB11 periph A */ + <1 10 0x1 0x1 /* PB10 periph A with pullup */ + 1 11 0x1 0x0>; /* PB11 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <3 8 0x2 0x0>; /* PB8 periph B */ + <2 8 0x2 0x0>; /* PC8 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <3 10 0x2 0x0>; /* PB10 periph B */ + <2 10 0x2 0x0>; /* PC10 periph B */ }; }; @@ -220,8 +220,8 @@ uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 12 0x1 0x1 /* PB12 periph A with pullup */ - 2 13 0x1 0x0>; /* PB13 periph A */ + <1 12 0x1 0x1 /* PB12 periph A with pullup */ + 1 13 0x1 0x0>; /* PB13 periph A */ }; }; @@ -322,6 +322,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ + 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ + 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ + 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ + 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -471,6 +489,28 @@ status = "disabled"; }; + spi0: spi@fffc8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffc8000 0x200>; + interrupts = <12 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@fffcc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x200>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; @@ -484,6 +524,9 @@ atmel,adc-drdy-mask = <0x10000>; atmel,adc-status-register = <0x1c>; atmel,adc-trigger-register = <0x04>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; trigger@0 { trigger-name = "timer-counter-0"; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 271d4de026e9..94b58ab2cc08 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -303,6 +303,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ + 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ + 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ + 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ + 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -462,6 +480,28 @@ reg = <0xfffffd40 0x10>; status = "disabled"; }; + + spi0: spi@fffa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa4000 0x200>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@fffa8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa8000 0x200>; + interrupts = <15 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 1eb08728f527..3b82d91e7fcc 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -79,6 +79,16 @@ }; }; }; + + spi0: spi@fffa4000 { + status = "okay"; + cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; nand0: nand@40000000 { @@ -155,8 +165,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; left_click { label = "left_click"; diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index fbe7a7089c2a..28467fd6bf96 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9G15 SoC"; - compatible = "atmel, at91sam9g15, atmel,at91sam9x5"; + compatible = "atmel,at91sam9g15", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index 86dd3f6d938f..5427b2dba87e 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -11,6 +11,6 @@ /include/ "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9G15-EK"; compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index da15e83e7f17..6a92c5baef8c 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -96,6 +96,16 @@ status = "okay"; pinctrl-0 = <&pinctrl_ssc0_tx>; }; + + spi0: spi@fffc8000 { + status = "okay"; + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; }; nand0: nand@40000000 { @@ -167,8 +177,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; btn3 { label = "Button 3"; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 05a718fb83c4..5fd32df03f25 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9G25 SoC"; - compatible = "atmel, at91sam9g25, atmel,at91sam9x5"; + compatible = "atmel,at91sam9g25", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index c5ab16fba059..a1c511fecdc1 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -13,4 +13,13 @@ / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index f9d14a722794..d6fa8af50724 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9G35 SoC"; - compatible = "atmel, at91sam9g35, atmel,at91sam9x5"; + compatible = "atmel,at91sam9g35", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 95944bdd798d..6f58ab8d21f5 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -13,4 +13,13 @@ / { model = "Atmel AT91SAM9G35-EK"; compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 6b1d4cab24c2..f8f7370e8669 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -322,6 +322,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */ + 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */ + 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */ + 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */ + 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -484,6 +502,9 @@ atmel,adc-drdy-mask = <0x10000>; atmel,adc-status-register = <0x1c>; atmel,adc-trigger-register = <0x08>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; trigger@0 { trigger-name = "external-rising"; @@ -531,6 +552,28 @@ reg = <0xfffffd40 0x10>; status = "disabled"; }; + + spi0: spi@fffa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa4000 0x200>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@fffa8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa8000 0x200>; + interrupts = <15 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 20c31913c270..51d9251b5bbe 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -102,6 +102,16 @@ }; }; }; + + spi0: spi@fffa4000{ + status = "okay"; + cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <13000000>; + reg = <0>; + }; + }; }; nand0: nand@40000000 { @@ -162,8 +172,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; left_click { label = "left_click"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 7750f98dd764..b2961f1ea51b 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -261,6 +261,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ + 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ + 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ + 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ + 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -373,6 +391,28 @@ #size-cells = <0>; status = "disabled"; }; + + spi0: spi@f0000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0000000 0x100>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@f0004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0004000 0x100>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d400f8de4387..d30e48bd1e9d 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -67,6 +67,16 @@ }; }; }; + + spi0: spi@f0000000 { + status = "okay"; + cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; nand0: nand@40000000 { @@ -104,8 +114,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; enter { label = "Enter"; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 54eb33ba6d22..9ac2bc2b4f07 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9X25 SoC"; - compatible = "atmel, at91sam9x25, atmel,at91sam9x5"; + compatible = "atmel,at91sam9x25", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index af907eaa1f25..3b40d11d65e7 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -13,4 +13,18 @@ / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + macb1: ethernet@f8030000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index fb102d6126ce..ba67d83d17ac 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9X35 SoC"; - compatible = "atmel, at91sam9x35, atmel,at91sam9x5"; + compatible = "atmel,at91sam9x35", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index 5ccb607b5414..6ad19a0d5424 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -13,4 +13,13 @@ / { model = "Atmel AT91SAM9X35-EK"; compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index a98c0d50fbbe..640b3bbbb706 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -343,6 +343,72 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ + 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ + 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ + 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ + 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <0 30 0x1 0x0 /* PA30 periph A I2C0 data */ + 0 31 0x1 0x0>; /* PA31 periph A I2C0 clock */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <2 0 0x3 0x0 /* PC0 periph C I2C1 data */ + 2 1 0x3 0x0>; /* PC1 periph C I2C1 clock */ + }; + }; + + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <1 4 0x2 0x0 /* PB4 periph B I2C2 data */ + 1 5 0x2 0x0>; /* PB5 periph B I2C2 clock */ + }; + }; + + i2c_gpio0 { + pinctrl_i2c_gpio0: i2c_gpio0-0 { + atmel,pins = + <0 30 0x0 0x2 /* PA30 gpio multidrive I2C0 data */ + 0 31 0x0 0x2>; /* PA31 gpio multidrive I2C0 clock */ + }; + }; + + i2c_gpio1 { + pinctrl_i2c_gpio1: i2c_gpio1-0 { + atmel,pins = + <2 0 0x0 0x2 /* PC0 gpio multidrive I2C1 data */ + 2 1 0x0 0x2>; /* PC1 gpio multidrive I2C1 clock */ + }; + }; + + i2c_gpio2 { + pinctrl_i2c_gpio2: i2c_gpio2-0 { + atmel,pins = + <1 4 0x0 0x2 /* PB4 gpio multidrive I2C2 data */ + 1 5 0x0 0x2>; /* PB5 gpio multidrive I2C2 clock */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -471,6 +537,8 @@ interrupts = <9 4 6>; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; status = "disabled"; }; @@ -480,6 +548,8 @@ interrupts = <10 4 6>; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; status = "disabled"; }; @@ -489,6 +559,8 @@ interrupts = <11 4 6>; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; status = "disabled"; }; @@ -505,6 +577,9 @@ atmel,adc-drdy-mask = <0x1000000>; atmel,adc-status-register = <0x30>; atmel,adc-trigger-register = <0xc0>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; trigger@0 { trigger-name = "external-rising"; @@ -529,6 +604,35 @@ trigger-value = <0x6>; }; }; + + spi0: spi@f0000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0000000 0x100>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@f0004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0004000 0x100>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; + + rtc@fffffeb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffeb0 0x40>; + interrupts = <1 4 7>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -577,6 +681,8 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio0>; status = "disabled"; }; @@ -590,6 +696,8 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio1>; status = "disabled"; }; @@ -603,6 +711,8 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 4027ac7e4502..347a74a857f6 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -24,6 +24,16 @@ }; ahb { + apb { + pinctrl@fffff400 { + 1wire_cm { + pinctrl_1wire_cm: 1wire_cm-0 { + atmel,pins = <1 18 0x0 0x2>; /* PB18 multidrive, conflicts with led */ + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "hw"; @@ -74,4 +84,14 @@ gpios = <&pioD 21 0>; }; }; + + 1wire_cm { + compatible = "w1-gpio"; + gpios = <&pioB 18 0>; + linux,open-drain; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_1wire_cm>; + status = "okay"; + }; + }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 8a7cf1d9cf5d..1fa48d2bfd80 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -13,7 +13,7 @@ compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { @@ -52,23 +52,10 @@ status = "okay"; }; - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - i2c0: i2c@f8010000 { status = "okay"; }; - i2c1: i2c@f8014000 { - status = "okay"; - }; - - i2c2: i2c@f8018000 { - status = "okay"; - }; - pinctrl@fffff400 { mmc0 { pinctrl_board_mmc0: mmc0-board { @@ -84,6 +71,16 @@ }; }; }; + + spi0: spi@f0000000 { + status = "okay"; + cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; usb0: ohci@00600000 { diff --git a/arch/arm/boot/dts/atlas6-evb.dts b/arch/arm/boot/dts/atlas6-evb.dts new file mode 100644 index 000000000000..ab042ca8dea1 --- /dev/null +++ b/arch/arm/boot/dts/atlas6-evb.dts @@ -0,0 +1,78 @@ +/* + * DTS file for CSR SiRFatlas6 Evaluation Board + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "atlas6.dtsi" + +/ { + model = "CSR SiRFatlas6 Evaluation Board"; + compatible = "sirf,atlas6-cb", "sirf,atlas6"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + axi { + peri-iobg { + uart@b0060000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + }; + spi@b00d0000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + spi@b0170000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + }; + i2c0: i2c@b00e0000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + lcd@40 { + compatible = "sirf,lcd"; + reg = <0x40>; + }; + }; + + }; + disp-iobg { + lcd@90010000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_24pins_a>; + }; + }; + }; + display: display@0 { + panels { + panel0: panel@0 { + panel-name = "Innolux TFT"; + hactive = <800>; + vactive = <480>; + left_margin = <20>; + right_margin = <234>; + upper_margin = <3>; + lower_margin = <41>; + hsync_len = <3>; + vsync_len = <2>; + pixclock = <33264000>; + sync = <3>; + timing = <0x88>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi new file mode 100644 index 000000000000..7d1a27949c13 --- /dev/null +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -0,0 +1,668 @@ +/* + * DTS file for CSR SiRFatlas6 SoC + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" +/ { + compatible = "sirf,atlas6"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + /* from bootloader */ + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0x80000000>; + + intc: interrupt-controller@80020000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "sirf,prima2-intc"; + reg = <0x80020000 0x1000>; + }; + + sys-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x88000000 0x88000000 0x40000>; + + clks: clock-controller@88000000 { + compatible = "sirf,atlas6-clkc"; + reg = <0x88000000 0x1000>; + interrupts = <3>; + #clock-cells = <1>; + }; + + reset-controller@88010000 { + compatible = "sirf,prima2-rstc"; + reg = <0x88010000 0x1000>; + }; + + rsc-controller@88020000 { + compatible = "sirf,prima2-rsc"; + reg = <0x88020000 0x1000>; + }; + }; + + mem-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90000000 0x90000000 0x10000>; + + memory-controller@90000000 { + compatible = "sirf,prima2-memc"; + reg = <0x90000000 0x10000>; + interrupts = <27>; + clocks = <&clks 5>; + }; + }; + + disp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90010000 0x90010000 0x30000>; + + lcd@90010000 { + compatible = "sirf,prima2-lcd"; + reg = <0x90010000 0x20000>; + interrupts = <30>; + clocks = <&clks 34>; + display=<&display>; + /* later transfer to pwm */ + bl-gpio = <&gpio 7 0>; + default-panel = <&panel0>; + }; + + vpp@90020000 { + compatible = "sirf,prima2-vpp"; + reg = <0x90020000 0x10000>; + interrupts = <31>; + clocks = <&clks 35>; + }; + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x98000000 0x98000000 0x8000000>; + + graphics@98000000 { + compatible = "powervr,sgx510"; + reg = <0x98000000 0x8000000>; + interrupts = <6>; + clocks = <&clks 32>; + }; + }; + + dsp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa8000000 0xa8000000 0x2000000>; + + dspif@a8000000 { + compatible = "sirf,prima2-dspif"; + reg = <0xa8000000 0x10000>; + interrupts = <9>; + }; + + gps@a8010000 { + compatible = "sirf,prima2-gps"; + reg = <0xa8010000 0x10000>; + interrupts = <7>; + clocks = <&clks 9>; + }; + + dsp@a9000000 { + compatible = "sirf,prima2-dsp"; + reg = <0xa9000000 0x1000000>; + interrupts = <8>; + clocks = <&clks 8>; + }; + }; + + peri-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0xb0000000 0x180000>, + <0x56000000 0x56000000 0x1b00000>; + + timer@b0020000 { + compatible = "sirf,prima2-tick"; + reg = <0xb0020000 0x1000>; + interrupts = <0>; + }; + + nand@b0030000 { + compatible = "sirf,prima2-nand"; + reg = <0xb0030000 0x10000>; + interrupts = <41>; + clocks = <&clks 26>; + }; + + audio@b0040000 { + compatible = "sirf,prima2-audio"; + reg = <0xb0040000 0x10000>; + interrupts = <35>; + clocks = <&clks 27>; + }; + + uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x1000>; + interrupts = <17>; + fifosize = <128>; + clocks = <&clks 13>; + }; + + uart1: uart@b0060000 { + cell-index = <1>; + compatible = "sirf,prima2-uart"; + reg = <0xb0060000 0x1000>; + interrupts = <18>; + fifosize = <32>; + clocks = <&clks 14>; + }; + + uart2: uart@b0070000 { + cell-index = <2>; + compatible = "sirf,prima2-uart"; + reg = <0xb0070000 0x1000>; + interrupts = <19>; + fifosize = <128>; + clocks = <&clks 15>; + }; + + usp0: usp@b0080000 { + cell-index = <0>; + compatible = "sirf,prima2-usp"; + reg = <0xb0080000 0x10000>; + interrupts = <20>; + clocks = <&clks 28>; + }; + + usp1: usp@b0090000 { + cell-index = <1>; + compatible = "sirf,prima2-usp"; + reg = <0xb0090000 0x10000>; + interrupts = <21>; + clocks = <&clks 29>; + }; + + dmac0: dma-controller@b00b0000 { + cell-index = <0>; + compatible = "sirf,prima2-dmac"; + reg = <0xb00b0000 0x10000>; + interrupts = <12>; + clocks = <&clks 24>; + }; + + dmac1: dma-controller@b0160000 { + cell-index = <1>; + compatible = "sirf,prima2-dmac"; + reg = <0xb0160000 0x10000>; + interrupts = <13>; + clocks = <&clks 25>; + }; + + vip@b00C0000 { + compatible = "sirf,prima2-vip"; + reg = <0xb00C0000 0x10000>; + clocks = <&clks 31>; + }; + + spi0: spi@b00d0000 { + cell-index = <0>; + compatible = "sirf,prima2-spi"; + reg = <0xb00d0000 0x10000>; + interrupts = <15>; + sirf,spi-num-chipselects = <1>; + cs-gpios = <&gpio 0 0>; + sirf,spi-dma-rx-channel = <25>; + sirf,spi-dma-tx-channel = <20>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clks 19>; + status = "disabled"; + }; + + spi1: spi@b0170000 { + cell-index = <1>; + compatible = "sirf,prima2-spi"; + reg = <0xb0170000 0x10000>; + interrupts = <16>; + clocks = <&clks 20>; + status = "disabled"; + }; + + i2c0: i2c@b00e0000 { + cell-index = <0>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00e0000 0x10000>; + interrupts = <24>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clks 17>; + }; + + i2c1: i2c@b00f0000 { + cell-index = <1>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00f0000 0x10000>; + interrupts = <25>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clks 18>; + }; + + tsc@b0110000 { + compatible = "sirf,prima2-tsc"; + reg = <0xb0110000 0x10000>; + interrupts = <33>; + clocks = <&clks 16>; + }; + + gpio: pinctrl@b0120000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,atlas6-pinctrl"; + reg = <0xb0120000 0x10000>; + interrupts = <43 44 45 46 47>; + gpio-controller; + interrupt-controller; + + lcd_16pins_a: lcd0@0 { + lcd { + sirf,pins = "lcd_16bitsgrp"; + sirf,function = "lcd_16bits"; + }; + }; + lcd_18pins_a: lcd0@1 { + lcd { + sirf,pins = "lcd_18bitsgrp"; + sirf,function = "lcd_18bits"; + }; + }; + lcd_24pins_a: lcd0@2 { + lcd { + sirf,pins = "lcd_24bitsgrp"; + sirf,function = "lcd_24bits"; + }; + }; + lcdrom_pins_a: lcdrom0@0 { + lcd { + sirf,pins = "lcdromgrp"; + sirf,function = "lcdrom"; + }; + }; + uart0_pins_a: uart0@0 { + uart { + sirf,pins = "uart0grp"; + sirf,function = "uart0"; + }; + }; + uart1_pins_a: uart1@0 { + uart { + sirf,pins = "uart1grp"; + sirf,function = "uart1"; + }; + }; + uart2_pins_a: uart2@0 { + uart { + sirf,pins = "uart2grp"; + sirf,function = "uart2"; + }; + }; + uart2_noflow_pins_a: uart2@1 { + uart { + sirf,pins = "uart2_nostreamctrlgrp"; + sirf,function = "uart2_nostreamctrl"; + }; + }; + spi0_pins_a: spi0@0 { + spi { + sirf,pins = "spi0grp"; + sirf,function = "spi0"; + }; + }; + spi1_pins_a: spi1@0 { + spi { + sirf,pins = "spi1grp"; + sirf,function = "spi1"; + }; + }; + i2c0_pins_a: i2c0@0 { + i2c { + sirf,pins = "i2c0grp"; + sirf,function = "i2c0"; + }; + }; + i2c1_pins_a: i2c1@0 { + i2c { + sirf,pins = "i2c1grp"; + sirf,function = "i2c1"; + }; + }; + pwm0_pins_a: pwm0@0 { + pwm { + sirf,pins = "pwm0grp"; + sirf,function = "pwm0"; + }; + }; + pwm1_pins_a: pwm1@0 { + pwm { + sirf,pins = "pwm1grp"; + sirf,function = "pwm1"; + }; + }; + pwm2_pins_a: pwm2@0 { + pwm { + sirf,pins = "pwm2grp"; + sirf,function = "pwm2"; + }; + }; + pwm3_pins_a: pwm3@0 { + pwm { + sirf,pins = "pwm3grp"; + sirf,function = "pwm3"; + }; + }; + pwm4_pins_a: pwm4@0 { + pwm { + sirf,pins = "pwm4grp"; + sirf,function = "pwm4"; + }; + }; + gps_pins_a: gps@0 { + gps { + sirf,pins = "gpsgrp"; + sirf,function = "gps"; + }; + }; + vip_pins_a: vip@0 { + vip { + sirf,pins = "vipgrp"; + sirf,function = "vip"; + }; + }; + sdmmc0_pins_a: sdmmc0@0 { + sdmmc0 { + sirf,pins = "sdmmc0grp"; + sirf,function = "sdmmc0"; + }; + }; + sdmmc1_pins_a: sdmmc1@0 { + sdmmc1 { + sirf,pins = "sdmmc1grp"; + sirf,function = "sdmmc1"; + }; + }; + sdmmc2_pins_a: sdmmc2@0 { + sdmmc2 { + sirf,pins = "sdmmc2grp"; + sirf,function = "sdmmc2"; + }; + }; + sdmmc2_nowp_pins_a: sdmmc2_nowp@0 { + sdmmc2_nowp { + sirf,pins = "sdmmc2_nowpgrp"; + sirf,function = "sdmmc2_nowp"; + }; + }; + sdmmc3_pins_a: sdmmc3@0 { + sdmmc3 { + sirf,pins = "sdmmc3grp"; + sirf,function = "sdmmc3"; + }; + }; + sdmmc5_pins_a: sdmmc5@0 { + sdmmc5 { + sirf,pins = "sdmmc5grp"; + sirf,function = "sdmmc5"; + }; + }; + i2s_pins_a: i2s@0 { + i2s { + sirf,pins = "i2sgrp"; + sirf,function = "i2s"; + }; + }; + i2s_no_din_pins_a: i2s_no_din@0 { + i2s_no_din { + sirf,pins = "i2s_no_dingrp"; + sirf,function = "i2s_no_din"; + }; + }; + i2s_6chn_pins_a: i2s_6chn@0 { + i2s_6chn { + sirf,pins = "i2s_6chngrp"; + sirf,function = "i2s_6chn"; + }; + }; + ac97_pins_a: ac97@0 { + ac97 { + sirf,pins = "ac97grp"; + sirf,function = "ac97"; + }; + }; + nand_pins_a: nand@0 { + nand { + sirf,pins = "nandgrp"; + sirf,function = "nand"; + }; + }; + usp0_pins_a: usp0@0 { + usp0 { + sirf,pins = "usp0grp"; + sirf,function = "usp0"; + }; + }; + usp1_pins_a: usp1@0 { + usp1 { + sirf,pins = "usp1grp"; + sirf,function = "usp1"; + }; + }; + usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 { + usb0_upli_drvbus { + sirf,pins = "usb0_upli_drvbusgrp"; + sirf,function = "usb0_upli_drvbus"; + }; + }; + usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 { + usb1_utmi_drvbus { + sirf,pins = "usb1_utmi_drvbusgrp"; + sirf,function = "usb1_utmi_drvbus"; + }; + }; + warm_rst_pins_a: warm_rst@0 { + warm_rst { + sirf,pins = "warm_rstgrp"; + sirf,function = "warm_rst"; + }; + }; + pulse_count_pins_a: pulse_count@0 { + pulse_count { + sirf,pins = "pulse_countgrp"; + sirf,function = "pulse_count"; + }; + }; + cko0_rst_pins_a: cko0_rst@0 { + cko0_rst { + sirf,pins = "cko0_rstgrp"; + sirf,function = "cko0_rst"; + }; + }; + cko1_rst_pins_a: cko1_rst@0 { + cko1_rst { + sirf,pins = "cko1_rstgrp"; + sirf,function = "cko1_rst"; + }; + }; + }; + + pwm@b0130000 { + compatible = "sirf,prima2-pwm"; + reg = <0xb0130000 0x10000>; + clocks = <&clks 21>; + }; + + efusesys@b0140000 { + compatible = "sirf,prima2-efuse"; + reg = <0xb0140000 0x10000>; + clocks = <&clks 22>; + }; + + pulsec@b0150000 { + compatible = "sirf,prima2-pulsec"; + reg = <0xb0150000 0x10000>; + interrupts = <48>; + clocks = <&clks 23>; + }; + + pci-iobg { + compatible = "sirf,prima2-pciiobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x56000000 0x56000000 0x1b00000>; + + sd0: sdhci@56000000 { + cell-index = <0>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56000000 0x100000>; + interrupts = <38>; + bus-width = <8>; + clocks = <&clks 36>; + }; + + sd1: sdhci@56100000 { + cell-index = <1>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56100000 0x100000>; + interrupts = <38>; + status = "disabled"; + clocks = <&clks 36>; + }; + + sd2: sdhci@56200000 { + cell-index = <2>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56200000 0x100000>; + interrupts = <23>; + status = "disabled"; + clocks = <&clks 37>; + }; + + sd3: sdhci@56300000 { + cell-index = <3>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56300000 0x100000>; + interrupts = <23>; + status = "disabled"; + clocks = <&clks 37>; + }; + + sd5: sdhci@56500000 { + cell-index = <5>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56500000 0x100000>; + interrupts = <39>; + status = "disabled"; + clocks = <&clks 38>; + }; + + pci-copy@57900000 { + compatible = "sirf,prima2-pcicp"; + reg = <0x57900000 0x100000>; + interrupts = <40>; + }; + + rom-interface@57a00000 { + compatible = "sirf,prima2-romif"; + reg = <0x57a00000 0x100000>; + }; + }; + }; + + rtc-iobg { + compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80030000 0x10000>; + + gpsrtc@1000 { + compatible = "sirf,prima2-gpsrtc"; + reg = <0x1000 0x1000>; + interrupts = <55 56 57>; + }; + + sysrtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; + + pwrc@3000 { + compatible = "sirf,prima2-pwrc"; + reg = <0x3000 0x1000>; + interrupts = <32>; + }; + }; + + uus-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb8000000 0xb8000000 0x40000>; + + usb0: usb@b00e0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8000000 0x10000>; + interrupts = <10>; + clocks = <&clks 40>; + }; + + usb1: usb@b00f0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8010000 0x10000>; + interrupts = <11>; + clocks = <&clks 41>; + }; + + security@b00f0000 { + compatible = "sirf,prima2-security"; + reg = <0xb8030000 0x10000>; + interrupts = <42>; + clocks = <&clks 7>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index ad135885bd2a..8f71f40722b9 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -47,4 +47,12 @@ cache-unified; cache-level = <2>; }; + + timer@35006000 { + compatible = "bcm,kona-timer"; + reg = <0x35006000 0x1000>; + interrupts = <0x0 7 0x4>; + clock-frequency = <32768>; + }; + }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 7e0481e2441a..f0052dccf9a8 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -34,6 +34,11 @@ reg = <0x7e100000 0x28>; }; + rng { + compatible = "brcm,bcm2835-rng"; + reg = <0x7e104000 0x10>; + }; + uart@20201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; @@ -64,6 +69,16 @@ #interrupt-cells = <2>; }; + spi: spi@20204000 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204000 0x1000>; + interrupts = <2 22>; + clocks = <&clk_spi>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@20205000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x1000>; @@ -107,5 +122,12 @@ #clock-cells = <0>; clock-frequency = <250000000>; }; + + clk_spi: spi { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <250000000>; + }; }; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index f712fb607a42..c5834a6c5bf4 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -35,14 +35,84 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; + + tps: tps@48 { + reg = <0x48>; + }; }; wdt: wdt@1c21000 { status = "okay"; }; + mmc0: mmc@1c40000 { + max-frequency = <50000000>; + bus-width = <4>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + }; }; nand_cs3@62000000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_cs3_pins>; }; + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +/include/ "tps6507x.dtsi" + +&tps { + vdcdc1_2-supply = <&vbat>; + vdcdc3-supply = <&vbat>; + vldo1_2-supply = <&vbat>; + + regulators { + vdcdc1_reg: regulator@0 { + regulator-name = "VDCDC1_3.3V"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + }; + + vdcdc2_reg: regulator@1 { + regulator-name = "VDCDC2_3.3V"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + ti,defdcdc_default = <1>; + }; + + vdcdc3_reg: regulator@2 { + regulator-name = "VDCDC3_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + ti,defdcdc_default = <1>; + }; + + ldo1_reg: regulator@3 { + regulator-name = "LDO1_1.8V"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "LDO2_1.2V"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1320000>; + regulator-always-on; + regulator-boot-on; + }; + }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 3ec1bda64356..3ade343f13cc 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -62,6 +62,15 @@ 0x10 0x00002200 0x0000ff00 >; }; + mmc0_pins: pinmux_mmc_pins { + pinctrl-single,bits = < + /* MMCSD0_DAT[3] MMCSD0_DAT[2] + * MMCSD0_DAT[1] MMCSD0_DAT[0] + * MMCSD0_CMD MMCSD0_CLK + */ + 0x28 0x00222222 0x00ffffff + >; + }; }; serial0: serial@1c42000 { compatible = "ns16550a"; @@ -107,6 +116,12 @@ reg = <0x21000 0x1000>; status = "disabled"; }; + mmc0: mmc@1c40000 { + compatible = "ti,da830-mmc"; + reg = <0x40000 0x1000>; + interrupts = <16>; + status = "disabled"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 9de93096601a..b6bc4ff17f26 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -191,8 +191,8 @@ prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; - reg = <0x80157000 0x1000>; - reg-names = "prcmu"; + reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; @@ -674,10 +674,13 @@ compatible = "regulator-gpio"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2600000>; + regulator-max-microvolt = <2900000>; regulator-name = "mmci-reg"; regulator-type = "voltage"; + startup-delay-us = <100>; + enable-active-high; + states = <1800000 0x1 2900000 0x0>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index f7509cafc377..6cab46849cdb 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -50,6 +50,11 @@ #clock-cells = <1>; }; + thermal: thermal@d001c { + compatible = "marvell,dove-thermal"; + reg = <0xd001c 0x0c>, <0xd005c 0x08>; + }; + uart0: serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index 379128eb9d98..c0bc426952ea 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -87,6 +87,7 @@ mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&vmmci>; cd-gpios = <&tc3589x_gpio 3 0x4>; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts index eec29c4a86dc..c2d274815923 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -25,6 +25,14 @@ }; soc-u9500 { + prcmu@80157000 { + ab8500@5 { + ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; + }; + }; + }; + i2c@80004000 { tps61052@33 { compatible = "tps61052"; @@ -40,7 +48,7 @@ vmmci: regulator-gpio { gpios = <&tc3589x_gpio 18 0x4>; - gpio-enable = <&tc3589x_gpio 17 0x4>; + enable-gpio = <&tc3589x_gpio 17 0x4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 56afcf41aae0..ad2d79324cd3 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -295,6 +295,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx23-digctl"; reg = <0x8001c000 2000>; status = "disabled"; }; @@ -321,6 +322,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -360,7 +362,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl"; + compatible = "fsl,imx23-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; @@ -426,6 +428,7 @@ compatible = "fsl,imx23-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <28 29 30 31>; + clocks = <&clks 28>; }; auart0: serial@8006c000 { diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index 1a9d0491cdce..f8db366c46ff 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx25.dtsi" +#include "imx25.dtsi" / { model = "Ka-Ro TX25"; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index a02a860afd18..f607ce520eda 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx25.dtsi" +#include "imx25.dtsi" / { model = "Freescale i.MX25 Product Development Kit"; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 94f33059158a..d2550e0bca24 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -9,7 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { aliases { diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index b464c807d8d9..ba4c6df08ece 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "imx27.dtsi" +#include "imx27.dtsi" / { model = "Armadeus Systems APF27 module"; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts new file mode 100644 index 000000000000..66b8e1c1b0be --- /dev/null +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2013 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* APF27Dev is a docking board for the APF27 SOM */ +#include "imx27-apf27.dts" + +/ { + model = "Armadeus Systems APF27Dev docking/development board"; + compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27"; + + gpio-keys { + compatible = "gpio-keys"; + + user-key { + label = "user"; + gpios = <&gpio6 13 0>; + linux,code = <276>; /* BTN_EXTRA */ + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio6 14 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&cspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 28 1>; + status = "okay"; +}; + +&cspi2 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio4 21 1>, <&gpio4 27 1>, + <&gpio2 17 1>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 41cd1105608e..5ce89aa275df 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx27.dtsi" +#include "imx27.dtsi" / { model = "Freescale i.MX27 Product Development Kit"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index 53b0ec0c228e..fe64e3a91df0 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx27.dtsi" +#include "imx27.dtsi" / { model = "Phytec pcm038"; @@ -71,3 +71,9 @@ #size-cells = <1>; }; }; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 5a82cb5707a8..ff4bd4873edf 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -9,7 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { aliases { @@ -60,14 +60,41 @@ wdog: wdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; - reg = <0x10002000 0x4000>; + reg = <0x10002000 0x1000>; interrupts = <27>; + clocks = <&clks 0>; + }; + + gpt1: timer@10003000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x10003000 0x1000>; + interrupts = <26>; + clocks = <&clks 46>, <&clks 61>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@10004000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x10004000 0x1000>; + interrupts = <25>; + clocks = <&clks 45>, <&clks 61>; + clock-names = "ipg", "per"; + }; + + gpt3: timer@10005000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x10005000 0x1000>; + interrupts = <24>; + clocks = <&clks 44>, <&clks 61>; + clock-names = "ipg", "per"; }; uart1: serial@1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; interrupts = <20>; + clocks = <&clks 81>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -75,6 +102,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000b000 0x1000>; interrupts = <19>; + clocks = <&clks 80>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -82,6 +111,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000c000 0x1000>; interrupts = <18>; + clocks = <&clks 79>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -89,6 +120,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000d000 0x1000>; interrupts = <17>; + clocks = <&clks 78>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -98,6 +131,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; + clocks = <&clks 53>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -107,6 +142,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; + clocks = <&clks 52>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -116,6 +153,7 @@ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x10012000 0x1000>; interrupts = <12>; + clocks = <&clks 40>; status = "disabled"; }; @@ -185,13 +223,33 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; + clocks = <&clks 51>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; + gpt4: timer@10019000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x10019000 0x1000>; + interrupts = <4>; + clocks = <&clks 43>, <&clks 61>; + clock-names = "ipg", "per"; + }; + + gpt5: timer@1001a000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x1001a000 0x1000>; + interrupts = <3>; + clocks = <&clks 42>, <&clks 61>; + clock-names = "ipg", "per"; + }; + uart5: serial@1001b000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001b000 0x1000>; interrupts = <49>; + clocks = <&clks 77>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -199,6 +257,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001c000 0x1000>; interrupts = <48>; + clocks = <&clks 78>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -208,9 +268,17 @@ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x1001d000 0x1000>; interrupts = <1>; + clocks = <&clks 39>; status = "disabled"; }; + gpt6: timer@1001f000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x1001f000 0x1000>; + interrupts = <2>; + clocks = <&clks 41>, <&clks 61>; + clock-names = "ipg", "per"; + }; }; aipi@10020000 { /* AIPI2 */ @@ -224,10 +292,19 @@ compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; interrupts = <50>; + clocks = <&clks 48>, <&clks 67>, <&clks 0>; + clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + clks: ccm@10027000{ + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + #clock-cells = <1>; + }; }; + nfc: nand@d8000000 { #address-cells = <1>; #size-cells = <1>; @@ -235,6 +312,7 @@ compatible = "fsl,imx27-nand"; reg = <0xd8000000 0x1000>; interrupts = <29>; + clocks = <&clks 54>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 6ce3d17c3a29..fd36e1cca104 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -152,7 +152,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index e6cde8aa7fff..6c6a5442800a 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -70,7 +70,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; rtc: rtc@51 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 7ba49662b9bc..64af2381c1b0 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -647,6 +647,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx28-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; @@ -676,6 +677,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -755,7 +757,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl"; + compatible = "fsl,imx28-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; @@ -838,6 +840,7 @@ compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <48 49 50 51>; + clocks = <&clks 26>; }; auart0: serial@8006a000 { diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 9ac6f6ba1d64..2424abfc9c7b 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx31.dtsi" +#include "imx31.dtsi" / { model = "Buglabs i.MX31 Bug 1.x"; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 454c2d175402..c5449257ad9a 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -9,7 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { aliases { @@ -101,5 +101,21 @@ #clock-cells = <1>; }; }; + + aips@53f00000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x53f00000 0x100000>; + ranges; + + gpt: timer@53f90000 { + compatible = "fsl,imx31-gpt"; + reg = <0x53f90000 0x4000>; + interrupts = <29>; + clocks = <&clks 10>, <&clks 22>; + clock-names = "ipg", "per"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx35-pinfunc.h b/arch/arm/boot/dts/imx35-pinfunc.h new file mode 100644 index 000000000000..4911f2c405fa --- /dev/null +++ b/arch/arm/boot/dts/imx35-pinfunc.h @@ -0,0 +1,970 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX35_PINFUNC_H +#define __DTS_IMX35_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX35_PAD_CAPTURE__GPT_CAPIN1 0x004 0x328 0x000 0x0 0x0 +#define MX35_PAD_CAPTURE__GPT_CMPOUT2 0x004 0x328 0x000 0x1 0x0 +#define MX35_PAD_CAPTURE__CSPI2_SS1 0x004 0x328 0x7f4 0x2 0x0 +#define MX35_PAD_CAPTURE__EPIT1_EPITO 0x004 0x328 0x000 0x3 0x0 +#define MX35_PAD_CAPTURE__CCM_CLK32K 0x004 0x328 0x7d0 0x4 0x0 +#define MX35_PAD_CAPTURE__GPIO1_4 0x004 0x328 0x850 0x5 0x0 +#define MX35_PAD_COMPARE__GPT_CMPOUT1 0x008 0x32c 0x000 0x0 0x0 +#define MX35_PAD_COMPARE__GPT_CAPIN2 0x008 0x32c 0x000 0x1 0x0 +#define MX35_PAD_COMPARE__GPT_CMPOUT3 0x008 0x32c 0x000 0x2 0x0 +#define MX35_PAD_COMPARE__EPIT2_EPITO 0x008 0x32c 0x000 0x3 0x0 +#define MX35_PAD_COMPARE__GPIO1_5 0x008 0x32c 0x854 0x5 0x0 +#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 0x008 0x32c 0x000 0x7 0x0 +#define MX35_PAD_WDOG_RST__WDOG_WDOG_B 0x00c 0x330 0x000 0x0 0x0 +#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE 0x00c 0x330 0x000 0x3 0x0 +#define MX35_PAD_WDOG_RST__GPIO1_6 0x00c 0x330 0x858 0x5 0x0 +#define MX35_PAD_GPIO1_0__GPIO1_0 0x010 0x334 0x82c 0x0 0x0 +#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY 0x010 0x334 0x7d4 0x1 0x0 +#define MX35_PAD_GPIO1_0__OWIRE_LINE 0x010 0x334 0x990 0x2 0x0 +#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 0x010 0x334 0x000 0x7 0x0 +#define MX35_PAD_GPIO1_1__GPIO1_1 0x014 0x338 0x838 0x0 0x0 +#define MX35_PAD_GPIO1_1__PWM_PWMO 0x014 0x338 0x000 0x2 0x0 +#define MX35_PAD_GPIO1_1__CSPI1_SS2 0x014 0x338 0x7d8 0x3 0x0 +#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT 0x014 0x338 0x000 0x6 0x0 +#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 0x014 0x338 0x000 0x7 0x0 +#define MX35_PAD_GPIO2_0__GPIO2_0 0x018 0x33c 0x868 0x0 0x0 +#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK 0x018 0x33c 0x000 0x1 0x0 +#define MX35_PAD_GPIO3_0__GPIO3_0 0x01c 0x340 0x8e8 0x0 0x0 +#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK 0x01c 0x340 0x000 0x1 0x0 +#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B 0x000 0x344 0x000 0x0 0x0 +#define MX35_PAD_POR_B__CCM_POR_B 0x000 0x348 0x000 0x0 0x0 +#define MX35_PAD_CLKO__CCM_CLKO 0x020 0x34c 0x000 0x0 0x0 +#define MX35_PAD_CLKO__GPIO1_8 0x020 0x34c 0x860 0x5 0x0 +#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 0x000 0x350 0x000 0x0 0x0 +#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 0x000 0x354 0x000 0x0 0x0 +#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 0x000 0x358 0x000 0x0 0x0 +#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 0x000 0x35c 0x000 0x0 0x0 +#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 0x000 0x360 0x000 0x0 0x0 +#define MX35_PAD_VSTBY__CCM_VSTBY 0x024 0x364 0x000 0x0 0x0 +#define MX35_PAD_VSTBY__GPIO1_7 0x024 0x364 0x85c 0x5 0x0 +#define MX35_PAD_A0__EMI_EIM_DA_L_0 0x028 0x368 0x000 0x0 0x0 +#define MX35_PAD_A1__EMI_EIM_DA_L_1 0x02c 0x36c 0x000 0x0 0x0 +#define MX35_PAD_A2__EMI_EIM_DA_L_2 0x030 0x370 0x000 0x0 0x0 +#define MX35_PAD_A3__EMI_EIM_DA_L_3 0x034 0x374 0x000 0x0 0x0 +#define MX35_PAD_A4__EMI_EIM_DA_L_4 0x038 0x378 0x000 0x0 0x0 +#define MX35_PAD_A5__EMI_EIM_DA_L_5 0x03c 0x37c 0x000 0x0 0x0 +#define MX35_PAD_A6__EMI_EIM_DA_L_6 0x040 0x380 0x000 0x0 0x0 +#define MX35_PAD_A7__EMI_EIM_DA_L_7 0x044 0x384 0x000 0x0 0x0 +#define MX35_PAD_A8__EMI_EIM_DA_H_8 0x048 0x388 0x000 0x0 0x0 +#define MX35_PAD_A9__EMI_EIM_DA_H_9 0x04c 0x38c 0x000 0x0 0x0 +#define MX35_PAD_A10__EMI_EIM_DA_H_10 0x050 0x390 0x000 0x0 0x0 +#define MX35_PAD_MA10__EMI_MA10 0x054 0x394 0x000 0x0 0x0 +#define MX35_PAD_A11__EMI_EIM_DA_H_11 0x058 0x398 0x000 0x0 0x0 +#define MX35_PAD_A12__EMI_EIM_DA_H_12 0x05c 0x39c 0x000 0x0 0x0 +#define MX35_PAD_A13__EMI_EIM_DA_H_13 0x060 0x3a0 0x000 0x0 0x0 +#define MX35_PAD_A14__EMI_EIM_DA_H2_14 0x064 0x3a4 0x000 0x0 0x0 +#define MX35_PAD_A15__EMI_EIM_DA_H2_15 0x068 0x3a8 0x000 0x0 0x0 +#define MX35_PAD_A16__EMI_EIM_A_16 0x06c 0x3ac 0x000 0x0 0x0 +#define MX35_PAD_A17__EMI_EIM_A_17 0x070 0x3b0 0x000 0x0 0x0 +#define MX35_PAD_A18__EMI_EIM_A_18 0x074 0x3b4 0x000 0x0 0x0 +#define MX35_PAD_A19__EMI_EIM_A_19 0x078 0x3b8 0x000 0x0 0x0 +#define MX35_PAD_A20__EMI_EIM_A_20 0x07c 0x3bc 0x000 0x0 0x0 +#define MX35_PAD_A21__EMI_EIM_A_21 0x080 0x3c0 0x000 0x0 0x0 +#define MX35_PAD_A22__EMI_EIM_A_22 0x084 0x3c4 0x000 0x0 0x0 +#define MX35_PAD_A23__EMI_EIM_A_23 0x088 0x3c8 0x000 0x0 0x0 +#define MX35_PAD_A24__EMI_EIM_A_24 0x08c 0x3cc 0x000 0x0 0x0 +#define MX35_PAD_A25__EMI_EIM_A_25 0x090 0x3d0 0x000 0x0 0x0 +#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 0x000 0x3d4 0x000 0x0 0x0 +#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 0x000 0x3d8 0x000 0x0 0x0 +#define MX35_PAD_SD0__EMI_DRAM_D_0 0x000 0x3dc 0x000 0x0 0x0 +#define MX35_PAD_SD1__EMI_DRAM_D_1 0x000 0x3e0 0x000 0x0 0x0 +#define MX35_PAD_SD2__EMI_DRAM_D_2 0x000 0x3e4 0x000 0x0 0x0 +#define MX35_PAD_SD3__EMI_DRAM_D_3 0x000 0x3e8 0x000 0x0 0x0 +#define MX35_PAD_SD4__EMI_DRAM_D_4 0x000 0x3ec 0x000 0x0 0x0 +#define MX35_PAD_SD5__EMI_DRAM_D_5 0x000 0x3f0 0x000 0x0 0x0 +#define MX35_PAD_SD6__EMI_DRAM_D_6 0x000 0x3f4 0x000 0x0 0x0 +#define MX35_PAD_SD7__EMI_DRAM_D_7 0x000 0x3f8 0x000 0x0 0x0 +#define MX35_PAD_SD8__EMI_DRAM_D_8 0x000 0x3fc 0x000 0x0 0x0 +#define MX35_PAD_SD9__EMI_DRAM_D_9 0x000 0x400 0x000 0x0 0x0 +#define MX35_PAD_SD10__EMI_DRAM_D_10 0x000 0x404 0x000 0x0 0x0 +#define MX35_PAD_SD11__EMI_DRAM_D_11 0x000 0x408 0x000 0x0 0x0 +#define MX35_PAD_SD12__EMI_DRAM_D_12 0x000 0x40c 0x000 0x0 0x0 +#define MX35_PAD_SD13__EMI_DRAM_D_13 0x000 0x410 0x000 0x0 0x0 +#define MX35_PAD_SD14__EMI_DRAM_D_14 0x000 0x414 0x000 0x0 0x0 +#define MX35_PAD_SD15__EMI_DRAM_D_15 0x000 0x418 0x000 0x0 0x0 +#define MX35_PAD_SD16__EMI_DRAM_D_16 0x000 0x41c 0x000 0x0 0x0 +#define MX35_PAD_SD17__EMI_DRAM_D_17 0x000 0x420 0x000 0x0 0x0 +#define MX35_PAD_SD18__EMI_DRAM_D_18 0x000 0x424 0x000 0x0 0x0 +#define MX35_PAD_SD19__EMI_DRAM_D_19 0x000 0x428 0x000 0x0 0x0 +#define MX35_PAD_SD20__EMI_DRAM_D_20 0x000 0x42c 0x000 0x0 0x0 +#define MX35_PAD_SD21__EMI_DRAM_D_21 0x000 0x430 0x000 0x0 0x0 +#define MX35_PAD_SD22__EMI_DRAM_D_22 0x000 0x434 0x000 0x0 0x0 +#define MX35_PAD_SD23__EMI_DRAM_D_23 0x000 0x438 0x000 0x0 0x0 +#define MX35_PAD_SD24__EMI_DRAM_D_24 0x000 0x43c 0x000 0x0 0x0 +#define MX35_PAD_SD25__EMI_DRAM_D_25 0x000 0x440 0x000 0x0 0x0 +#define MX35_PAD_SD26__EMI_DRAM_D_26 0x000 0x444 0x000 0x0 0x0 +#define MX35_PAD_SD27__EMI_DRAM_D_27 0x000 0x448 0x000 0x0 0x0 +#define MX35_PAD_SD28__EMI_DRAM_D_28 0x000 0x44c 0x000 0x0 0x0 +#define MX35_PAD_SD29__EMI_DRAM_D_29 0x000 0x450 0x000 0x0 0x0 +#define MX35_PAD_SD30__EMI_DRAM_D_30 0x000 0x454 0x000 0x0 0x0 +#define MX35_PAD_SD31__EMI_DRAM_D_31 0x000 0x458 0x000 0x0 0x0 +#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 0x000 0x45c 0x000 0x0 0x0 +#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 0x000 0x460 0x000 0x0 0x0 +#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 0x000 0x464 0x000 0x0 0x0 +#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 0x000 0x468 0x000 0x0 0x0 +#define MX35_PAD_EB0__EMI_EIM_EB0_B 0x094 0x46c 0x000 0x0 0x0 +#define MX35_PAD_EB1__EMI_EIM_EB1_B 0x098 0x470 0x000 0x0 0x0 +#define MX35_PAD_OE__EMI_EIM_OE 0x09c 0x474 0x000 0x0 0x0 +#define MX35_PAD_CS0__EMI_EIM_CS0 0x0a0 0x478 0x000 0x0 0x0 +#define MX35_PAD_CS1__EMI_EIM_CS1 0x0a4 0x47c 0x000 0x0 0x0 +#define MX35_PAD_CS1__EMI_NANDF_CE3 0x0a4 0x47c 0x000 0x3 0x0 +#define MX35_PAD_CS2__EMI_EIM_CS2 0x0a8 0x480 0x000 0x0 0x0 +#define MX35_PAD_CS3__EMI_EIM_CS3 0x0ac 0x484 0x000 0x0 0x0 +#define MX35_PAD_CS4__EMI_EIM_CS4 0x0b0 0x488 0x000 0x0 0x0 +#define MX35_PAD_CS4__EMI_DTACK_B 0x0b0 0x488 0x800 0x1 0x0 +#define MX35_PAD_CS4__EMI_NANDF_CE1 0x0b0 0x488 0x000 0x3 0x0 +#define MX35_PAD_CS4__GPIO1_20 0x0b0 0x488 0x83c 0x5 0x0 +#define MX35_PAD_CS5__EMI_EIM_CS5 0x0b4 0x48c 0x000 0x0 0x0 +#define MX35_PAD_CS5__CSPI2_SS2 0x0b4 0x48c 0x7f8 0x1 0x0 +#define MX35_PAD_CS5__CSPI1_SS2 0x0b4 0x48c 0x7d8 0x2 0x1 +#define MX35_PAD_CS5__EMI_NANDF_CE2 0x0b4 0x48c 0x000 0x3 0x0 +#define MX35_PAD_CS5__GPIO1_21 0x0b4 0x48c 0x840 0x5 0x0 +#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 0x0b8 0x490 0x000 0x0 0x0 +#define MX35_PAD_NF_CE0__GPIO1_22 0x0b8 0x490 0x844 0x5 0x0 +#define MX35_PAD_ECB__EMI_EIM_ECB 0x000 0x494 0x000 0x0 0x0 +#define MX35_PAD_LBA__EMI_EIM_LBA 0x0bc 0x498 0x000 0x0 0x0 +#define MX35_PAD_BCLK__EMI_EIM_BCLK 0x0c0 0x49c 0x000 0x0 0x0 +#define MX35_PAD_RW__EMI_EIM_RW 0x0c4 0x4a0 0x000 0x0 0x0 +#define MX35_PAD_RAS__EMI_DRAM_RAS 0x000 0x4a4 0x000 0x0 0x0 +#define MX35_PAD_CAS__EMI_DRAM_CAS 0x000 0x4a8 0x000 0x0 0x0 +#define MX35_PAD_SDWE__EMI_DRAM_SDWE 0x000 0x4ac 0x000 0x0 0x0 +#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 0x000 0x4b0 0x000 0x0 0x0 +#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 0x000 0x4b4 0x000 0x0 0x0 +#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK 0x000 0x4b8 0x000 0x0 0x0 +#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 0x000 0x4bc 0x000 0x0 0x0 +#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 0x000 0x4c0 0x000 0x0 0x0 +#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 0x000 0x4c4 0x000 0x0 0x0 +#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 0x000 0x4c8 0x000 0x0 0x0 +#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B 0x0c8 0x4cc 0x000 0x0 0x0 +#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 0x0c8 0x4cc 0x9d8 0x1 0x0 +#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC 0x0c8 0x4cc 0x924 0x2 0x0 +#define MX35_PAD_NFWE_B__GPIO2_18 0x0c8 0x4cc 0x88c 0x5 0x0 +#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 0x0c8 0x4cc 0x000 0x7 0x0 +#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B 0x0cc 0x4d0 0x000 0x0 0x0 +#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR 0x0cc 0x4d0 0x9ec 0x1 0x0 +#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK 0x0cc 0x4d0 0x000 0x2 0x0 +#define MX35_PAD_NFRE_B__GPIO2_19 0x0cc 0x4d0 0x890 0x5 0x0 +#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 0x0cc 0x4d0 0x000 0x7 0x0 +#define MX35_PAD_NFALE__EMI_NANDF_ALE 0x0d0 0x4d4 0x000 0x0 0x0 +#define MX35_PAD_NFALE__USB_TOP_USBH2_STP 0x0d0 0x4d4 0x000 0x1 0x0 +#define MX35_PAD_NFALE__IPU_DISPB_CS0 0x0d0 0x4d4 0x000 0x2 0x0 +#define MX35_PAD_NFALE__GPIO2_20 0x0d0 0x4d4 0x898 0x5 0x0 +#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 0x0d0 0x4d4 0x000 0x7 0x0 +#define MX35_PAD_NFCLE__EMI_NANDF_CLE 0x0d4 0x4d8 0x000 0x0 0x0 +#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT 0x0d4 0x4d8 0x9f0 0x1 0x0 +#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS 0x0d4 0x4d8 0x000 0x2 0x0 +#define MX35_PAD_NFCLE__GPIO2_21 0x0d4 0x4d8 0x89c 0x5 0x0 +#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 0x0d4 0x4d8 0x000 0x7 0x0 +#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B 0x0d8 0x4dc 0x000 0x0 0x0 +#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 0x0d8 0x4dc 0x9e8 0x1 0x0 +#define MX35_PAD_NFWP_B__IPU_DISPB_WR 0x0d8 0x4dc 0x000 0x2 0x0 +#define MX35_PAD_NFWP_B__GPIO2_22 0x0d8 0x4dc 0x8a0 0x5 0x0 +#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL 0x0d8 0x4dc 0x000 0x7 0x0 +#define MX35_PAD_NFRB__EMI_NANDF_RB 0x0dc 0x4e0 0x000 0x0 0x0 +#define MX35_PAD_NFRB__IPU_DISPB_RD 0x0dc 0x4e0 0x000 0x2 0x0 +#define MX35_PAD_NFRB__GPIO2_23 0x0dc 0x4e0 0x8a4 0x5 0x0 +#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK 0x0dc 0x4e0 0x000 0x7 0x0 +#define MX35_PAD_D15__EMI_EIM_D_15 0x000 0x4e4 0x000 0x0 0x0 +#define MX35_PAD_D14__EMI_EIM_D_14 0x000 0x4e8 0x000 0x0 0x0 +#define MX35_PAD_D13__EMI_EIM_D_13 0x000 0x4ec 0x000 0x0 0x0 +#define MX35_PAD_D12__EMI_EIM_D_12 0x000 0x4f0 0x000 0x0 0x0 +#define MX35_PAD_D11__EMI_EIM_D_11 0x000 0x4f4 0x000 0x0 0x0 +#define MX35_PAD_D10__EMI_EIM_D_10 0x000 0x4f8 0x000 0x0 0x0 +#define MX35_PAD_D9__EMI_EIM_D_9 0x000 0x4fc 0x000 0x0 0x0 +#define MX35_PAD_D8__EMI_EIM_D_8 0x000 0x500 0x000 0x0 0x0 +#define MX35_PAD_D7__EMI_EIM_D_7 0x000 0x504 0x000 0x0 0x0 +#define MX35_PAD_D6__EMI_EIM_D_6 0x000 0x508 0x000 0x0 0x0 +#define MX35_PAD_D5__EMI_EIM_D_5 0x000 0x50c 0x000 0x0 0x0 +#define MX35_PAD_D4__EMI_EIM_D_4 0x000 0x510 0x000 0x0 0x0 +#define MX35_PAD_D3__EMI_EIM_D_3 0x000 0x514 0x000 0x0 0x0 +#define MX35_PAD_D2__EMI_EIM_D_2 0x000 0x518 0x000 0x0 0x0 +#define MX35_PAD_D1__EMI_EIM_D_1 0x000 0x51c 0x000 0x0 0x0 +#define MX35_PAD_D0__EMI_EIM_D_0 0x000 0x520 0x000 0x0 0x0 +#define MX35_PAD_CSI_D8__IPU_CSI_D_8 0x0e0 0x524 0x000 0x0 0x0 +#define MX35_PAD_CSI_D8__KPP_COL_0 0x0e0 0x524 0x950 0x1 0x0 +#define MX35_PAD_CSI_D8__GPIO1_20 0x0e0 0x524 0x83c 0x5 0x1 +#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 0x0e0 0x524 0x000 0x7 0x0 +#define MX35_PAD_CSI_D9__IPU_CSI_D_9 0x0e4 0x528 0x000 0x0 0x0 +#define MX35_PAD_CSI_D9__KPP_COL_1 0x0e4 0x528 0x954 0x1 0x0 +#define MX35_PAD_CSI_D9__GPIO1_21 0x0e4 0x528 0x840 0x5 0x1 +#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 0x0e4 0x528 0x000 0x7 0x0 +#define MX35_PAD_CSI_D10__IPU_CSI_D_10 0x0e8 0x52c 0x000 0x0 0x0 +#define MX35_PAD_CSI_D10__KPP_COL_2 0x0e8 0x52c 0x958 0x1 0x0 +#define MX35_PAD_CSI_D10__GPIO1_22 0x0e8 0x52c 0x844 0x5 0x1 +#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 0x0e8 0x52c 0x000 0x7 0x0 +#define MX35_PAD_CSI_D11__IPU_CSI_D_11 0x0ec 0x530 0x000 0x0 0x0 +#define MX35_PAD_CSI_D11__KPP_COL_3 0x0ec 0x530 0x95c 0x1 0x0 +#define MX35_PAD_CSI_D11__GPIO1_23 0x0ec 0x530 0x000 0x5 0x0 +#define MX35_PAD_CSI_D12__IPU_CSI_D_12 0x0f0 0x534 0x000 0x0 0x0 +#define MX35_PAD_CSI_D12__KPP_ROW_0 0x0f0 0x534 0x970 0x1 0x0 +#define MX35_PAD_CSI_D12__GPIO1_24 0x0f0 0x534 0x000 0x5 0x0 +#define MX35_PAD_CSI_D13__IPU_CSI_D_13 0x0f4 0x538 0x000 0x0 0x0 +#define MX35_PAD_CSI_D13__KPP_ROW_1 0x0f4 0x538 0x974 0x1 0x0 +#define MX35_PAD_CSI_D13__GPIO1_25 0x0f4 0x538 0x000 0x5 0x0 +#define MX35_PAD_CSI_D14__IPU_CSI_D_14 0x0f8 0x53c 0x000 0x0 0x0 +#define MX35_PAD_CSI_D14__KPP_ROW_2 0x0f8 0x53c 0x978 0x1 0x0 +#define MX35_PAD_CSI_D14__GPIO1_26 0x0f8 0x53c 0x000 0x5 0x0 +#define MX35_PAD_CSI_D15__IPU_CSI_D_15 0x0fc 0x540 0x97c 0x0 0x0 +#define MX35_PAD_CSI_D15__KPP_ROW_3 0x0fc 0x540 0x000 0x1 0x0 +#define MX35_PAD_CSI_D15__GPIO1_27 0x0fc 0x540 0x000 0x5 0x0 +#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK 0x100 0x544 0x000 0x0 0x0 +#define MX35_PAD_CSI_MCLK__GPIO1_28 0x100 0x544 0x000 0x5 0x0 +#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC 0x104 0x548 0x000 0x0 0x0 +#define MX35_PAD_CSI_VSYNC__GPIO1_29 0x104 0x548 0x000 0x5 0x0 +#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC 0x108 0x54c 0x000 0x0 0x0 +#define MX35_PAD_CSI_HSYNC__GPIO1_30 0x108 0x54c 0x000 0x5 0x0 +#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK 0x10c 0x550 0x000 0x0 0x0 +#define MX35_PAD_CSI_PIXCLK__GPIO1_31 0x10c 0x550 0x000 0x5 0x0 +#define MX35_PAD_I2C1_CLK__I2C1_SCL 0x110 0x554 0x000 0x0 0x0 +#define MX35_PAD_I2C1_CLK__GPIO2_24 0x110 0x554 0x8a8 0x5 0x0 +#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK 0x110 0x554 0x000 0x6 0x0 +#define MX35_PAD_I2C1_DAT__I2C1_SDA 0x114 0x558 0x000 0x0 0x0 +#define MX35_PAD_I2C1_DAT__GPIO2_25 0x114 0x558 0x8ac 0x5 0x0 +#define MX35_PAD_I2C2_CLK__I2C2_SCL 0x118 0x55c 0x000 0x0 0x0 +#define MX35_PAD_I2C2_CLK__CAN1_TXCAN 0x118 0x55c 0x000 0x1 0x0 +#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR 0x118 0x55c 0x000 0x2 0x0 +#define MX35_PAD_I2C2_CLK__GPIO2_26 0x118 0x55c 0x8b0 0x5 0x0 +#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 0x118 0x55c 0x000 0x6 0x0 +#define MX35_PAD_I2C2_DAT__I2C2_SDA 0x11c 0x560 0x000 0x0 0x0 +#define MX35_PAD_I2C2_DAT__CAN1_RXCAN 0x11c 0x560 0x7c8 0x1 0x0 +#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC 0x11c 0x560 0x9f4 0x2 0x0 +#define MX35_PAD_I2C2_DAT__GPIO2_27 0x11c 0x560 0x8b4 0x5 0x0 +#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 0x11c 0x560 0x000 0x6 0x0 +#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x120 0x564 0x000 0x0 0x0 +#define MX35_PAD_STXD4__GPIO2_28 0x120 0x564 0x8b8 0x5 0x0 +#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 0x120 0x564 0x000 0x7 0x0 +#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x124 0x568 0x000 0x0 0x0 +#define MX35_PAD_SRXD4__GPIO2_29 0x124 0x568 0x8bc 0x5 0x0 +#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 0x124 0x568 0x000 0x7 0x0 +#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x128 0x56c 0x000 0x0 0x0 +#define MX35_PAD_SCK4__GPIO2_30 0x128 0x56c 0x8c4 0x5 0x0 +#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 0x128 0x56c 0x000 0x7 0x0 +#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x12c 0x570 0x000 0x0 0x0 +#define MX35_PAD_STXFS4__GPIO2_31 0x12c 0x570 0x8c8 0x5 0x0 +#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 0x12c 0x570 0x000 0x7 0x0 +#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD 0x130 0x574 0x000 0x0 0x0 +#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 0x130 0x574 0x000 0x1 0x0 +#define MX35_PAD_STXD5__CSPI2_MOSI 0x130 0x574 0x7ec 0x2 0x0 +#define MX35_PAD_STXD5__GPIO1_0 0x130 0x574 0x82c 0x5 0x1 +#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 0x130 0x574 0x000 0x7 0x0 +#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD 0x134 0x578 0x000 0x0 0x0 +#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 0x134 0x578 0x998 0x1 0x0 +#define MX35_PAD_SRXD5__CSPI2_MISO 0x134 0x578 0x7e8 0x2 0x0 +#define MX35_PAD_SRXD5__GPIO1_1 0x134 0x578 0x838 0x5 0x1 +#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 0x134 0x578 0x000 0x7 0x0 +#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC 0x138 0x57c 0x000 0x0 0x0 +#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK 0x138 0x57c 0x994 0x1 0x0 +#define MX35_PAD_SCK5__CSPI2_SCLK 0x138 0x57c 0x7e0 0x2 0x0 +#define MX35_PAD_SCK5__GPIO1_2 0x138 0x57c 0x848 0x5 0x0 +#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 0x138 0x57c 0x000 0x7 0x0 +#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS 0x13c 0x580 0x000 0x0 0x0 +#define MX35_PAD_STXFS5__CSPI2_RDY 0x13c 0x580 0x7e4 0x2 0x0 +#define MX35_PAD_STXFS5__GPIO1_3 0x13c 0x580 0x84c 0x5 0x0 +#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 0x13c 0x580 0x000 0x7 0x0 +#define MX35_PAD_SCKR__ESAI_SCKR 0x140 0x584 0x000 0x0 0x0 +#define MX35_PAD_SCKR__GPIO1_4 0x140 0x584 0x850 0x5 0x1 +#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 0x140 0x584 0x000 0x7 0x0 +#define MX35_PAD_FSR__ESAI_FSR 0x144 0x588 0x000 0x0 0x0 +#define MX35_PAD_FSR__GPIO1_5 0x144 0x588 0x854 0x5 0x1 +#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 0x144 0x588 0x000 0x7 0x0 +#define MX35_PAD_HCKR__ESAI_HCKR 0x148 0x58c 0x000 0x0 0x0 +#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS 0x148 0x58c 0x000 0x1 0x0 +#define MX35_PAD_HCKR__CSPI2_SS0 0x148 0x58c 0x7f0 0x2 0x0 +#define MX35_PAD_HCKR__IPU_FLASH_STROBE 0x148 0x58c 0x000 0x3 0x0 +#define MX35_PAD_HCKR__GPIO1_6 0x148 0x58c 0x858 0x5 0x1 +#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 0x148 0x58c 0x000 0x7 0x0 +#define MX35_PAD_SCKT__ESAI_SCKT 0x14c 0x590 0x000 0x0 0x0 +#define MX35_PAD_SCKT__GPIO1_7 0x14c 0x590 0x85c 0x5 0x1 +#define MX35_PAD_SCKT__IPU_CSI_D_0 0x14c 0x590 0x930 0x6 0x0 +#define MX35_PAD_SCKT__KPP_ROW_2 0x14c 0x590 0x978 0x7 0x1 +#define MX35_PAD_FST__ESAI_FST 0x150 0x594 0x000 0x0 0x0 +#define MX35_PAD_FST__GPIO1_8 0x150 0x594 0x860 0x5 0x1 +#define MX35_PAD_FST__IPU_CSI_D_1 0x150 0x594 0x934 0x6 0x0 +#define MX35_PAD_FST__KPP_ROW_3 0x150 0x594 0x97c 0x7 0x1 +#define MX35_PAD_HCKT__ESAI_HCKT 0x154 0x598 0x000 0x0 0x0 +#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC 0x154 0x598 0x7a8 0x1 0x0 +#define MX35_PAD_HCKT__GPIO1_9 0x154 0x598 0x864 0x5 0x0 +#define MX35_PAD_HCKT__IPU_CSI_D_2 0x154 0x598 0x938 0x6 0x0 +#define MX35_PAD_HCKT__KPP_COL_3 0x154 0x598 0x95c 0x7 0x1 +#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 0x158 0x59c 0x000 0x0 0x0 +#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC 0x158 0x59c 0x000 0x1 0x0 +#define MX35_PAD_TX5_RX0__CSPI2_SS2 0x158 0x59c 0x7f8 0x2 0x1 +#define MX35_PAD_TX5_RX0__CAN2_TXCAN 0x158 0x59c 0x000 0x3 0x0 +#define MX35_PAD_TX5_RX0__UART2_DTR 0x158 0x59c 0x000 0x4 0x0 +#define MX35_PAD_TX5_RX0__GPIO1_10 0x158 0x59c 0x830 0x5 0x0 +#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 0x158 0x59c 0x000 0x7 0x0 +#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 0x15c 0x5a0 0x000 0x0 0x0 +#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS 0x15c 0x5a0 0x000 0x1 0x0 +#define MX35_PAD_TX4_RX1__CSPI2_SS3 0x15c 0x5a0 0x7fc 0x2 0x0 +#define MX35_PAD_TX4_RX1__CAN2_RXCAN 0x15c 0x5a0 0x7cc 0x3 0x0 +#define MX35_PAD_TX4_RX1__UART2_DSR 0x15c 0x5a0 0x000 0x4 0x0 +#define MX35_PAD_TX4_RX1__GPIO1_11 0x15c 0x5a0 0x834 0x5 0x0 +#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 0x15c 0x5a0 0x93c 0x6 0x0 +#define MX35_PAD_TX4_RX1__KPP_ROW_0 0x15c 0x5a0 0x970 0x7 0x1 +#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 0x160 0x5a4 0x000 0x0 0x0 +#define MX35_PAD_TX3_RX2__I2C3_SCL 0x160 0x5a4 0x91c 0x1 0x0 +#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 0x160 0x5a4 0x000 0x3 0x0 +#define MX35_PAD_TX3_RX2__GPIO1_12 0x160 0x5a4 0x000 0x5 0x0 +#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 0x160 0x5a4 0x940 0x6 0x0 +#define MX35_PAD_TX3_RX2__KPP_ROW_1 0x160 0x5a4 0x974 0x7 0x1 +#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 0x164 0x5a8 0x000 0x0 0x0 +#define MX35_PAD_TX2_RX3__I2C3_SDA 0x164 0x5a8 0x920 0x1 0x0 +#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 0x164 0x5a8 0x000 0x3 0x0 +#define MX35_PAD_TX2_RX3__GPIO1_13 0x164 0x5a8 0x000 0x5 0x0 +#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 0x164 0x5a8 0x944 0x6 0x0 +#define MX35_PAD_TX2_RX3__KPP_COL_0 0x164 0x5a8 0x950 0x7 0x1 +#define MX35_PAD_TX1__ESAI_TX1 0x168 0x5ac 0x000 0x0 0x0 +#define MX35_PAD_TX1__CCM_PMIC_RDY 0x168 0x5ac 0x7d4 0x1 0x1 +#define MX35_PAD_TX1__CSPI1_SS2 0x168 0x5ac 0x7d8 0x2 0x2 +#define MX35_PAD_TX1__EMI_NANDF_CE3 0x168 0x5ac 0x000 0x3 0x0 +#define MX35_PAD_TX1__UART2_RI 0x168 0x5ac 0x000 0x4 0x0 +#define MX35_PAD_TX1__GPIO1_14 0x168 0x5ac 0x000 0x5 0x0 +#define MX35_PAD_TX1__IPU_CSI_D_6 0x168 0x5ac 0x948 0x6 0x0 +#define MX35_PAD_TX1__KPP_COL_1 0x168 0x5ac 0x954 0x7 0x1 +#define MX35_PAD_TX0__ESAI_TX0 0x16c 0x5b0 0x000 0x0 0x0 +#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK 0x16c 0x5b0 0x994 0x1 0x1 +#define MX35_PAD_TX0__CSPI1_SS3 0x16c 0x5b0 0x7dc 0x2 0x0 +#define MX35_PAD_TX0__EMI_DTACK_B 0x16c 0x5b0 0x800 0x3 0x1 +#define MX35_PAD_TX0__UART2_DCD 0x16c 0x5b0 0x000 0x4 0x0 +#define MX35_PAD_TX0__GPIO1_15 0x16c 0x5b0 0x000 0x5 0x0 +#define MX35_PAD_TX0__IPU_CSI_D_7 0x16c 0x5b0 0x94c 0x6 0x0 +#define MX35_PAD_TX0__KPP_COL_2 0x16c 0x5b0 0x958 0x7 0x1 +#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI 0x170 0x5b4 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_MOSI__GPIO1_16 0x170 0x5b4 0x000 0x5 0x0 +#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 0x170 0x5b4 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_MISO__CSPI1_MISO 0x174 0x5b8 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_MISO__GPIO1_17 0x174 0x5b8 0x000 0x5 0x0 +#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 0x174 0x5b8 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 0x178 0x5bc 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_SS0__OWIRE_LINE 0x178 0x5bc 0x990 0x1 0x1 +#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 0x178 0x5bc 0x7fc 0x2 0x1 +#define MX35_PAD_CSPI1_SS0__GPIO1_18 0x178 0x5bc 0x000 0x5 0x0 +#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 0x178 0x5bc 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 0x17c 0x5c0 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_SS1__PWM_PWMO 0x17c 0x5c0 0x000 0x1 0x0 +#define MX35_PAD_CSPI1_SS1__CCM_CLK32K 0x17c 0x5c0 0x7d0 0x2 0x1 +#define MX35_PAD_CSPI1_SS1__GPIO1_19 0x17c 0x5c0 0x000 0x5 0x0 +#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 0x17c 0x5c0 0x000 0x6 0x0 +#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 0x17c 0x5c0 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK 0x180 0x5c4 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_SCLK__GPIO3_4 0x180 0x5c4 0x904 0x5 0x0 +#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 0x180 0x5c4 0x000 0x6 0x0 +#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 0x180 0x5c4 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY 0x184 0x5c8 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 0x184 0x5c8 0x908 0x5 0x0 +#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 0x184 0x5c8 0x000 0x6 0x0 +#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 0x184 0x5c8 0x000 0x7 0x0 +#define MX35_PAD_RXD1__UART1_RXD_MUX 0x188 0x5cc 0x000 0x0 0x0 +#define MX35_PAD_RXD1__CSPI2_MOSI 0x188 0x5cc 0x7ec 0x1 0x1 +#define MX35_PAD_RXD1__KPP_COL_4 0x188 0x5cc 0x960 0x4 0x0 +#define MX35_PAD_RXD1__GPIO3_6 0x188 0x5cc 0x90c 0x5 0x0 +#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 0x188 0x5cc 0x000 0x7 0x0 +#define MX35_PAD_TXD1__UART1_TXD_MUX 0x18c 0x5d0 0x000 0x0 0x0 +#define MX35_PAD_TXD1__CSPI2_MISO 0x18c 0x5d0 0x7e8 0x1 0x1 +#define MX35_PAD_TXD1__KPP_COL_5 0x18c 0x5d0 0x964 0x4 0x0 +#define MX35_PAD_TXD1__GPIO3_7 0x18c 0x5d0 0x910 0x5 0x0 +#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 0x18c 0x5d0 0x000 0x7 0x0 +#define MX35_PAD_RTS1__UART1_RTS 0x190 0x5d4 0x000 0x0 0x0 +#define MX35_PAD_RTS1__CSPI2_SCLK 0x190 0x5d4 0x7e0 0x1 0x1 +#define MX35_PAD_RTS1__I2C3_SCL 0x190 0x5d4 0x91c 0x2 0x1 +#define MX35_PAD_RTS1__IPU_CSI_D_0 0x190 0x5d4 0x930 0x3 0x1 +#define MX35_PAD_RTS1__KPP_COL_6 0x190 0x5d4 0x968 0x4 0x0 +#define MX35_PAD_RTS1__GPIO3_8 0x190 0x5d4 0x914 0x5 0x0 +#define MX35_PAD_RTS1__EMI_NANDF_CE1 0x190 0x5d4 0x000 0x6 0x0 +#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 0x190 0x5d4 0x000 0x7 0x0 +#define MX35_PAD_CTS1__UART1_CTS 0x194 0x5d8 0x000 0x0 0x0 +#define MX35_PAD_CTS1__CSPI2_RDY 0x194 0x5d8 0x7e4 0x1 0x1 +#define MX35_PAD_CTS1__I2C3_SDA 0x194 0x5d8 0x920 0x2 0x1 +#define MX35_PAD_CTS1__IPU_CSI_D_1 0x194 0x5d8 0x934 0x3 0x1 +#define MX35_PAD_CTS1__KPP_COL_7 0x194 0x5d8 0x96c 0x4 0x0 +#define MX35_PAD_CTS1__GPIO3_9 0x194 0x5d8 0x918 0x5 0x0 +#define MX35_PAD_CTS1__EMI_NANDF_CE2 0x194 0x5d8 0x000 0x6 0x0 +#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 0x194 0x5d8 0x000 0x7 0x0 +#define MX35_PAD_RXD2__UART2_RXD_MUX 0x198 0x5dc 0x000 0x0 0x0 +#define MX35_PAD_RXD2__KPP_ROW_4 0x198 0x5dc 0x980 0x4 0x0 +#define MX35_PAD_RXD2__GPIO3_10 0x198 0x5dc 0x8ec 0x5 0x0 +#define MX35_PAD_TXD2__UART2_TXD_MUX 0x19c 0x5e0 0x000 0x0 0x0 +#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK 0x19c 0x5e0 0x994 0x1 0x2 +#define MX35_PAD_TXD2__KPP_ROW_5 0x19c 0x5e0 0x984 0x4 0x0 +#define MX35_PAD_TXD2__GPIO3_11 0x19c 0x5e0 0x8f0 0x5 0x0 +#define MX35_PAD_RTS2__UART2_RTS 0x1a0 0x5e4 0x000 0x0 0x0 +#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 0x1a0 0x5e4 0x998 0x1 0x1 +#define MX35_PAD_RTS2__CAN2_RXCAN 0x1a0 0x5e4 0x7cc 0x2 0x1 +#define MX35_PAD_RTS2__IPU_CSI_D_2 0x1a0 0x5e4 0x938 0x3 0x1 +#define MX35_PAD_RTS2__KPP_ROW_6 0x1a0 0x5e4 0x988 0x4 0x0 +#define MX35_PAD_RTS2__GPIO3_12 0x1a0 0x5e4 0x8f4 0x5 0x0 +#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC 0x1a0 0x5e4 0x000 0x6 0x0 +#define MX35_PAD_RTS2__UART3_RXD_MUX 0x1a0 0x5e4 0x9a0 0x7 0x0 +#define MX35_PAD_CTS2__UART2_CTS 0x1a4 0x5e8 0x000 0x0 0x0 +#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 0x1a4 0x5e8 0x000 0x1 0x0 +#define MX35_PAD_CTS2__CAN2_TXCAN 0x1a4 0x5e8 0x000 0x2 0x0 +#define MX35_PAD_CTS2__IPU_CSI_D_3 0x1a4 0x5e8 0x93c 0x3 0x1 +#define MX35_PAD_CTS2__KPP_ROW_7 0x1a4 0x5e8 0x98c 0x4 0x0 +#define MX35_PAD_CTS2__GPIO3_13 0x1a4 0x5e8 0x8f8 0x5 0x0 +#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS 0x1a4 0x5e8 0x000 0x6 0x0 +#define MX35_PAD_CTS2__UART3_TXD_MUX 0x1a4 0x5e8 0x000 0x7 0x0 +#define MX35_PAD_RTCK__ARM11P_TOP_RTCK 0x000 0x5ec 0x000 0x0 0x0 +#define MX35_PAD_TCK__SJC_TCK 0x000 0x5f0 0x000 0x0 0x0 +#define MX35_PAD_TMS__SJC_TMS 0x000 0x5f4 0x000 0x0 0x0 +#define MX35_PAD_TDI__SJC_TDI 0x000 0x5f8 0x000 0x0 0x0 +#define MX35_PAD_TDO__SJC_TDO 0x000 0x5fc 0x000 0x0 0x0 +#define MX35_PAD_TRSTB__SJC_TRSTB 0x000 0x600 0x000 0x0 0x0 +#define MX35_PAD_DE_B__SJC_DE_B 0x000 0x604 0x000 0x0 0x0 +#define MX35_PAD_SJC_MOD__SJC_MOD 0x000 0x608 0x000 0x0 0x0 +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR 0x1a8 0x60c 0x000 0x0 0x0 +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR 0x1a8 0x60c 0x000 0x1 0x0 +#define MX35_PAD_USBOTG_PWR__GPIO3_14 0x1a8 0x60c 0x8fc 0x5 0x0 +#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC 0x1ac 0x610 0x000 0x0 0x0 +#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC 0x1ac 0x610 0x9f4 0x1 0x1 +#define MX35_PAD_USBOTG_OC__GPIO3_15 0x1ac 0x610 0x900 0x5 0x0 +#define MX35_PAD_LD0__IPU_DISPB_DAT_0 0x1b0 0x614 0x000 0x0 0x0 +#define MX35_PAD_LD0__GPIO2_0 0x1b0 0x614 0x868 0x5 0x1 +#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 0x1b0 0x614 0x000 0x6 0x0 +#define MX35_PAD_LD1__IPU_DISPB_DAT_1 0x1b4 0x618 0x000 0x0 0x0 +#define MX35_PAD_LD1__GPIO2_1 0x1b4 0x618 0x894 0x5 0x0 +#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 0x1b4 0x618 0x000 0x6 0x0 +#define MX35_PAD_LD2__IPU_DISPB_DAT_2 0x1b8 0x61c 0x000 0x0 0x0 +#define MX35_PAD_LD2__GPIO2_2 0x1b8 0x61c 0x8c0 0x5 0x0 +#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 0x1b8 0x61c 0x000 0x6 0x0 +#define MX35_PAD_LD3__IPU_DISPB_DAT_3 0x1bc 0x620 0x000 0x0 0x0 +#define MX35_PAD_LD3__GPIO2_3 0x1bc 0x620 0x8cc 0x5 0x0 +#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 0x1bc 0x620 0x000 0x6 0x0 +#define MX35_PAD_LD4__IPU_DISPB_DAT_4 0x1c0 0x624 0x000 0x0 0x0 +#define MX35_PAD_LD4__GPIO2_4 0x1c0 0x624 0x8d0 0x5 0x0 +#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 0x1c0 0x624 0x000 0x6 0x0 +#define MX35_PAD_LD5__IPU_DISPB_DAT_5 0x1c4 0x628 0x000 0x0 0x0 +#define MX35_PAD_LD5__GPIO2_5 0x1c4 0x628 0x8d4 0x5 0x0 +#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 0x1c4 0x628 0x000 0x6 0x0 +#define MX35_PAD_LD6__IPU_DISPB_DAT_6 0x1c8 0x62c 0x000 0x0 0x0 +#define MX35_PAD_LD6__GPIO2_6 0x1c8 0x62c 0x8d8 0x5 0x0 +#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 0x1c8 0x62c 0x000 0x6 0x0 +#define MX35_PAD_LD7__IPU_DISPB_DAT_7 0x1cc 0x630 0x000 0x0 0x0 +#define MX35_PAD_LD7__GPIO2_7 0x1cc 0x630 0x8dc 0x5 0x0 +#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 0x1cc 0x630 0x000 0x6 0x0 +#define MX35_PAD_LD8__IPU_DISPB_DAT_8 0x1d0 0x634 0x000 0x0 0x0 +#define MX35_PAD_LD8__GPIO2_8 0x1d0 0x634 0x8e0 0x5 0x0 +#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 0x1d0 0x634 0x000 0x6 0x0 +#define MX35_PAD_LD9__IPU_DISPB_DAT_9 0x1d4 0x638 0x000 0x0 0x0 +#define MX35_PAD_LD9__GPIO2_9 0x1d4 0x638 0x8e4 0x5 0x0 +#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 0x1d4 0x638 0x000 0x6 0x0 +#define MX35_PAD_LD10__IPU_DISPB_DAT_10 0x1d8 0x63c 0x000 0x0 0x0 +#define MX35_PAD_LD10__GPIO2_10 0x1d8 0x63c 0x86c 0x5 0x0 +#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 0x1d8 0x63c 0x000 0x6 0x0 +#define MX35_PAD_LD11__IPU_DISPB_DAT_11 0x1dc 0x640 0x000 0x0 0x0 +#define MX35_PAD_LD11__GPIO2_11 0x1dc 0x640 0x870 0x5 0x0 +#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 0x1dc 0x640 0x000 0x6 0x0 +#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 0x1dc 0x640 0x000 0x7 0x0 +#define MX35_PAD_LD12__IPU_DISPB_DAT_12 0x1e0 0x644 0x000 0x0 0x0 +#define MX35_PAD_LD12__GPIO2_12 0x1e0 0x644 0x874 0x5 0x0 +#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 0x1e0 0x644 0x000 0x6 0x0 +#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 0x1e0 0x644 0x000 0x7 0x0 +#define MX35_PAD_LD13__IPU_DISPB_DAT_13 0x1e4 0x648 0x000 0x0 0x0 +#define MX35_PAD_LD13__GPIO2_13 0x1e4 0x648 0x878 0x5 0x0 +#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 0x1e4 0x648 0x000 0x6 0x0 +#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 0x1e4 0x648 0x000 0x7 0x0 +#define MX35_PAD_LD14__IPU_DISPB_DAT_14 0x1e8 0x64c 0x000 0x0 0x0 +#define MX35_PAD_LD14__GPIO2_14 0x1e8 0x64c 0x87c 0x5 0x0 +#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 0x1e8 0x64c 0x000 0x6 0x0 +#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 0x1e8 0x64c 0x000 0x7 0x0 +#define MX35_PAD_LD15__IPU_DISPB_DAT_15 0x1ec 0x650 0x000 0x0 0x0 +#define MX35_PAD_LD15__GPIO2_15 0x1ec 0x650 0x880 0x5 0x0 +#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 0x1ec 0x650 0x000 0x6 0x0 +#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 0x1ec 0x650 0x000 0x7 0x0 +#define MX35_PAD_LD16__IPU_DISPB_DAT_16 0x1f0 0x654 0x000 0x0 0x0 +#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC 0x1f0 0x654 0x928 0x2 0x0 +#define MX35_PAD_LD16__GPIO2_16 0x1f0 0x654 0x884 0x5 0x0 +#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 0x1f0 0x654 0x000 0x6 0x0 +#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 0x1f0 0x654 0x000 0x7 0x0 +#define MX35_PAD_LD17__IPU_DISPB_DAT_17 0x1f4 0x658 0x000 0x0 0x0 +#define MX35_PAD_LD17__IPU_DISPB_CS2 0x1f4 0x658 0x000 0x2 0x0 +#define MX35_PAD_LD17__GPIO2_17 0x1f4 0x658 0x888 0x5 0x0 +#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 0x1f4 0x658 0x000 0x6 0x0 +#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 0x1f4 0x658 0x000 0x7 0x0 +#define MX35_PAD_LD18__IPU_DISPB_DAT_18 0x1f8 0x65c 0x000 0x0 0x0 +#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC 0x1f8 0x65c 0x924 0x1 0x1 +#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC 0x1f8 0x65c 0x928 0x2 0x1 +#define MX35_PAD_LD18__ESDHC3_CMD 0x1f8 0x65c 0x818 0x3 0x0 +#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 0x1f8 0x65c 0x9b0 0x4 0x0 +#define MX35_PAD_LD18__GPIO3_24 0x1f8 0x65c 0x000 0x5 0x0 +#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 0x1f8 0x65c 0x000 0x6 0x0 +#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 0x1f8 0x65c 0x000 0x7 0x0 +#define MX35_PAD_LD19__IPU_DISPB_DAT_19 0x1fc 0x660 0x000 0x0 0x0 +#define MX35_PAD_LD19__IPU_DISPB_BCLK 0x1fc 0x660 0x000 0x1 0x0 +#define MX35_PAD_LD19__IPU_DISPB_CS1 0x1fc 0x660 0x000 0x2 0x0 +#define MX35_PAD_LD19__ESDHC3_CLK 0x1fc 0x660 0x814 0x3 0x0 +#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR 0x1fc 0x660 0x9c4 0x4 0x0 +#define MX35_PAD_LD19__GPIO3_25 0x1fc 0x660 0x000 0x5 0x0 +#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 0x1fc 0x660 0x000 0x6 0x0 +#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 0x1fc 0x660 0x000 0x7 0x0 +#define MX35_PAD_LD20__IPU_DISPB_DAT_20 0x200 0x664 0x000 0x0 0x0 +#define MX35_PAD_LD20__IPU_DISPB_CS0 0x200 0x664 0x000 0x1 0x0 +#define MX35_PAD_LD20__IPU_DISPB_SD_CLK 0x200 0x664 0x000 0x2 0x0 +#define MX35_PAD_LD20__ESDHC3_DAT0 0x200 0x664 0x81c 0x3 0x0 +#define MX35_PAD_LD20__GPIO3_26 0x200 0x664 0x000 0x5 0x0 +#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 0x200 0x664 0x000 0x6 0x0 +#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 0x200 0x664 0x000 0x7 0x0 +#define MX35_PAD_LD21__IPU_DISPB_DAT_21 0x204 0x668 0x000 0x0 0x0 +#define MX35_PAD_LD21__IPU_DISPB_PAR_RS 0x204 0x668 0x000 0x1 0x0 +#define MX35_PAD_LD21__IPU_DISPB_SER_RS 0x204 0x668 0x000 0x2 0x0 +#define MX35_PAD_LD21__ESDHC3_DAT1 0x204 0x668 0x820 0x3 0x0 +#define MX35_PAD_LD21__USB_TOP_USBOTG_STP 0x204 0x668 0x000 0x4 0x0 +#define MX35_PAD_LD21__GPIO3_27 0x204 0x668 0x000 0x5 0x0 +#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x204 0x668 0x000 0x6 0x0 +#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 0x204 0x668 0x000 0x7 0x0 +#define MX35_PAD_LD22__IPU_DISPB_DAT_22 0x208 0x66c 0x000 0x0 0x0 +#define MX35_PAD_LD22__IPU_DISPB_WR 0x208 0x66c 0x000 0x1 0x0 +#define MX35_PAD_LD22__IPU_DISPB_SD_D_I 0x208 0x66c 0x92c 0x2 0x0 +#define MX35_PAD_LD22__ESDHC3_DAT2 0x208 0x66c 0x824 0x3 0x0 +#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT 0x208 0x66c 0x9c8 0x4 0x0 +#define MX35_PAD_LD22__GPIO3_28 0x208 0x66c 0x000 0x5 0x0 +#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR 0x208 0x66c 0x000 0x6 0x0 +#define MX35_PAD_LD22__ARM11P_TOP_TRCTL 0x208 0x66c 0x000 0x7 0x0 +#define MX35_PAD_LD23__IPU_DISPB_DAT_23 0x20c 0x670 0x000 0x0 0x0 +#define MX35_PAD_LD23__IPU_DISPB_RD 0x20c 0x670 0x000 0x1 0x0 +#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO 0x20c 0x670 0x92c 0x2 0x1 +#define MX35_PAD_LD23__ESDHC3_DAT3 0x20c 0x670 0x828 0x3 0x0 +#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 0x20c 0x670 0x9c0 0x4 0x0 +#define MX35_PAD_LD23__GPIO3_29 0x20c 0x670 0x000 0x5 0x0 +#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS 0x20c 0x670 0x000 0x6 0x0 +#define MX35_PAD_LD23__ARM11P_TOP_TRCLK 0x20c 0x670 0x000 0x7 0x0 +#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC 0x210 0x674 0x000 0x0 0x0 +#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO 0x210 0x674 0x92c 0x2 0x2 +#define MX35_PAD_D3_HSYNC__GPIO3_30 0x210 0x674 0x000 0x5 0x0 +#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE 0x210 0x674 0x000 0x6 0x0 +#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 0x210 0x674 0x000 0x7 0x0 +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK 0x214 0x678 0x000 0x0 0x0 +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK 0x214 0x678 0x000 0x2 0x0 +#define MX35_PAD_D3_FPSHIFT__GPIO3_31 0x214 0x678 0x000 0x5 0x0 +#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 0x214 0x678 0x000 0x6 0x0 +#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 0x214 0x678 0x000 0x7 0x0 +#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY 0x218 0x67c 0x000 0x0 0x0 +#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O 0x218 0x67c 0x000 0x2 0x0 +#define MX35_PAD_D3_DRDY__GPIO1_0 0x218 0x67c 0x82c 0x5 0x2 +#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 0x218 0x67c 0x000 0x6 0x0 +#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 0x218 0x67c 0x000 0x7 0x0 +#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR 0x21c 0x680 0x000 0x0 0x0 +#define MX35_PAD_CONTRAST__GPIO1_1 0x21c 0x680 0x838 0x5 0x2 +#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 0x21c 0x680 0x000 0x6 0x0 +#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 0x21c 0x680 0x000 0x7 0x0 +#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC 0x220 0x684 0x000 0x0 0x0 +#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 0x220 0x684 0x000 0x2 0x0 +#define MX35_PAD_D3_VSYNC__GPIO1_2 0x220 0x684 0x848 0x5 0x1 +#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD 0x220 0x684 0x000 0x6 0x0 +#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 0x220 0x684 0x000 0x7 0x0 +#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV 0x224 0x688 0x000 0x0 0x0 +#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS 0x224 0x688 0x000 0x2 0x0 +#define MX35_PAD_D3_REV__GPIO1_3 0x224 0x688 0x84c 0x5 0x1 +#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB 0x224 0x688 0x000 0x6 0x0 +#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 0x224 0x688 0x000 0x7 0x0 +#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS 0x228 0x68c 0x000 0x0 0x0 +#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 0x228 0x68c 0x000 0x2 0x0 +#define MX35_PAD_D3_CLS__GPIO1_4 0x228 0x68c 0x850 0x5 0x2 +#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 0x228 0x68c 0x000 0x6 0x0 +#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 0x228 0x68c 0x000 0x7 0x0 +#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL 0x22c 0x690 0x000 0x0 0x0 +#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC 0x22c 0x690 0x928 0x2 0x2 +#define MX35_PAD_D3_SPL__GPIO1_5 0x22c 0x690 0x854 0x5 0x2 +#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 0x22c 0x690 0x000 0x6 0x0 +#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 0x22c 0x690 0x000 0x7 0x0 +#define MX35_PAD_SD1_CMD__ESDHC1_CMD 0x230 0x694 0x000 0x0 0x0 +#define MX35_PAD_SD1_CMD__MSHC_SCLK 0x230 0x694 0x000 0x1 0x0 +#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC 0x230 0x694 0x924 0x3 0x2 +#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 0x230 0x694 0x9b4 0x4 0x0 +#define MX35_PAD_SD1_CMD__GPIO1_6 0x230 0x694 0x858 0x5 0x2 +#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL 0x230 0x694 0x000 0x7 0x0 +#define MX35_PAD_SD1_CLK__ESDHC1_CLK 0x234 0x698 0x000 0x0 0x0 +#define MX35_PAD_SD1_CLK__MSHC_BS 0x234 0x698 0x000 0x1 0x0 +#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK 0x234 0x698 0x000 0x3 0x0 +#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 0x234 0x698 0x9b8 0x4 0x0 +#define MX35_PAD_SD1_CLK__GPIO1_7 0x234 0x698 0x85c 0x5 0x2 +#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK 0x234 0x698 0x000 0x7 0x0 +#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x238 0x69c 0x000 0x0 0x0 +#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 0x238 0x69c 0x000 0x1 0x0 +#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 0x238 0x69c 0x000 0x3 0x0 +#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 0x238 0x69c 0x9bc 0x4 0x0 +#define MX35_PAD_SD1_DATA0__GPIO1_8 0x238 0x69c 0x860 0x5 0x2 +#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 0x238 0x69c 0x000 0x7 0x0 +#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x23c 0x6a0 0x000 0x0 0x0 +#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 0x23c 0x6a0 0x000 0x1 0x0 +#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS 0x23c 0x6a0 0x000 0x3 0x0 +#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 0x23c 0x6a0 0x9a4 0x4 0x0 +#define MX35_PAD_SD1_DATA1__GPIO1_9 0x23c 0x6a0 0x864 0x5 0x1 +#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 0x23c 0x6a0 0x000 0x7 0x0 +#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x240 0x6a4 0x000 0x0 0x0 +#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 0x240 0x6a4 0x000 0x1 0x0 +#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR 0x240 0x6a4 0x000 0x3 0x0 +#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 0x240 0x6a4 0x9a8 0x4 0x0 +#define MX35_PAD_SD1_DATA2__GPIO1_10 0x240 0x6a4 0x830 0x5 0x1 +#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 0x240 0x6a4 0x000 0x7 0x0 +#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x244 0x6a8 0x000 0x0 0x0 +#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 0x244 0x6a8 0x000 0x1 0x0 +#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD 0x244 0x6a8 0x000 0x3 0x0 +#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 0x244 0x6a8 0x9ac 0x4 0x0 +#define MX35_PAD_SD1_DATA3__GPIO1_11 0x244 0x6a8 0x834 0x5 0x1 +#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 0x244 0x6a8 0x000 0x7 0x0 +#define MX35_PAD_SD2_CMD__ESDHC2_CMD 0x248 0x6ac 0x000 0x0 0x0 +#define MX35_PAD_SD2_CMD__I2C3_SCL 0x248 0x6ac 0x91c 0x1 0x2 +#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 0x248 0x6ac 0x804 0x2 0x0 +#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 0x248 0x6ac 0x938 0x3 0x2 +#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 0x248 0x6ac 0x9dc 0x4 0x0 +#define MX35_PAD_SD2_CMD__GPIO2_0 0x248 0x6ac 0x868 0x5 0x2 +#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 0x248 0x6ac 0x000 0x6 0x0 +#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC 0x248 0x6ac 0x928 0x7 0x3 +#define MX35_PAD_SD2_CLK__ESDHC2_CLK 0x24c 0x6b0 0x000 0x0 0x0 +#define MX35_PAD_SD2_CLK__I2C3_SDA 0x24c 0x6b0 0x920 0x1 0x2 +#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 0x24c 0x6b0 0x808 0x2 0x0 +#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 0x24c 0x6b0 0x93c 0x3 0x2 +#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 0x24c 0x6b0 0x9e0 0x4 0x0 +#define MX35_PAD_SD2_CLK__GPIO2_1 0x24c 0x6b0 0x894 0x5 0x1 +#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 0x24c 0x6b0 0x998 0x6 0x2 +#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 0x24c 0x6b0 0x000 0x7 0x0 +#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 0x250 0x6b4 0x000 0x0 0x0 +#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX 0x250 0x6b4 0x9a0 0x1 0x1 +#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 0x250 0x6b4 0x80c 0x2 0x0 +#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 0x250 0x6b4 0x940 0x3 0x1 +#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 0x250 0x6b4 0x9e4 0x4 0x0 +#define MX35_PAD_SD2_DATA0__GPIO2_2 0x250 0x6b4 0x8c0 0x5 0x1 +#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK 0x250 0x6b4 0x994 0x6 0x3 +#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 0x254 0x6b8 0x000 0x0 0x0 +#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX 0x254 0x6b8 0x000 0x1 0x0 +#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 0x254 0x6b8 0x810 0x2 0x0 +#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 0x254 0x6b8 0x944 0x3 0x1 +#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 0x254 0x6b8 0x9cc 0x4 0x0 +#define MX35_PAD_SD2_DATA1__GPIO2_3 0x254 0x6b8 0x8cc 0x5 0x1 +#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 0x258 0x6bc 0x000 0x0 0x0 +#define MX35_PAD_SD2_DATA2__UART3_RTS 0x258 0x6bc 0x99c 0x1 0x0 +#define MX35_PAD_SD2_DATA2__CAN1_RXCAN 0x258 0x6bc 0x7c8 0x2 0x1 +#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 0x258 0x6bc 0x948 0x3 0x1 +#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 0x258 0x6bc 0x9d0 0x4 0x0 +#define MX35_PAD_SD2_DATA2__GPIO2_4 0x258 0x6bc 0x8d0 0x5 0x1 +#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 0x25c 0x6c0 0x000 0x0 0x0 +#define MX35_PAD_SD2_DATA3__UART3_CTS 0x25c 0x6c0 0x000 0x1 0x0 +#define MX35_PAD_SD2_DATA3__CAN1_TXCAN 0x25c 0x6c0 0x000 0x2 0x0 +#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 0x25c 0x6c0 0x94c 0x3 0x1 +#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 0x25c 0x6c0 0x9d4 0x4 0x0 +#define MX35_PAD_SD2_DATA3__GPIO2_5 0x25c 0x6c0 0x8d4 0x5 0x1 +#define MX35_PAD_ATA_CS0__ATA_CS0 0x260 0x6c4 0x000 0x0 0x0 +#define MX35_PAD_ATA_CS0__CSPI1_SS3 0x260 0x6c4 0x7dc 0x1 0x1 +#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 0x260 0x6c4 0x000 0x3 0x0 +#define MX35_PAD_ATA_CS0__GPIO2_6 0x260 0x6c4 0x8d8 0x5 0x1 +#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 0x260 0x6c4 0x000 0x6 0x0 +#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 0x260 0x6c4 0x000 0x7 0x0 +#define MX35_PAD_ATA_CS1__ATA_CS1 0x264 0x6c8 0x000 0x0 0x0 +#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 0x264 0x6c8 0x000 0x3 0x0 +#define MX35_PAD_ATA_CS1__CSPI2_SS0 0x264 0x6c8 0x7f0 0x4 0x1 +#define MX35_PAD_ATA_CS1__GPIO2_7 0x264 0x6c8 0x8dc 0x5 0x1 +#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 0x264 0x6c8 0x000 0x6 0x0 +#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 0x264 0x6c8 0x000 0x7 0x0 +#define MX35_PAD_ATA_DIOR__ATA_DIOR 0x268 0x6cc 0x000 0x0 0x0 +#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 0x268 0x6cc 0x81c 0x1 0x1 +#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR 0x268 0x6cc 0x9c4 0x2 0x1 +#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 0x268 0x6cc 0x000 0x3 0x0 +#define MX35_PAD_ATA_DIOR__CSPI2_SS1 0x268 0x6cc 0x7f4 0x4 0x1 +#define MX35_PAD_ATA_DIOR__GPIO2_8 0x268 0x6cc 0x8e0 0x5 0x1 +#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 0x268 0x6cc 0x000 0x6 0x0 +#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 0x268 0x6cc 0x000 0x7 0x0 +#define MX35_PAD_ATA_DIOW__ATA_DIOW 0x26c 0x6d0 0x000 0x0 0x0 +#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 0x26c 0x6d0 0x820 0x1 0x1 +#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP 0x26c 0x6d0 0x000 0x2 0x0 +#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 0x26c 0x6d0 0x000 0x3 0x0 +#define MX35_PAD_ATA_DIOW__CSPI2_MOSI 0x26c 0x6d0 0x7ec 0x4 0x2 +#define MX35_PAD_ATA_DIOW__GPIO2_9 0x26c 0x6d0 0x8e4 0x5 0x1 +#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 0x26c 0x6d0 0x000 0x6 0x0 +#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 0x26c 0x6d0 0x000 0x7 0x0 +#define MX35_PAD_ATA_DMACK__ATA_DMACK 0x270 0x6d4 0x000 0x0 0x0 +#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 0x270 0x6d4 0x824 0x1 0x1 +#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT 0x270 0x6d4 0x9c8 0x2 0x1 +#define MX35_PAD_ATA_DMACK__CSPI2_MISO 0x270 0x6d4 0x7e8 0x4 0x2 +#define MX35_PAD_ATA_DMACK__GPIO2_10 0x270 0x6d4 0x86c 0x5 0x1 +#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 0x270 0x6d4 0x000 0x6 0x0 +#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 0x270 0x6d4 0x000 0x7 0x0 +#define MX35_PAD_ATA_RESET_B__ATA_RESET_B 0x274 0x6d8 0x000 0x0 0x0 +#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 0x274 0x6d8 0x828 0x1 0x1 +#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 0x274 0x6d8 0x9a4 0x2 0x1 +#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O 0x274 0x6d8 0x000 0x3 0x0 +#define MX35_PAD_ATA_RESET_B__CSPI2_RDY 0x274 0x6d8 0x7e4 0x4 0x2 +#define MX35_PAD_ATA_RESET_B__GPIO2_11 0x274 0x6d8 0x870 0x5 0x1 +#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 0x274 0x6d8 0x000 0x6 0x0 +#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 0x274 0x6d8 0x000 0x7 0x0 +#define MX35_PAD_ATA_IORDY__ATA_IORDY 0x278 0x6dc 0x000 0x0 0x0 +#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 0x278 0x6dc 0x000 0x1 0x0 +#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 0x278 0x6dc 0x9a8 0x2 0x1 +#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO 0x278 0x6dc 0x92c 0x3 0x3 +#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 0x278 0x6dc 0x000 0x4 0x0 +#define MX35_PAD_ATA_IORDY__GPIO2_12 0x278 0x6dc 0x874 0x5 0x1 +#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 0x278 0x6dc 0x000 0x6 0x0 +#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 0x278 0x6dc 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA0__ATA_DATA_0 0x27c 0x6e0 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 0x27c 0x6e0 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 0x27c 0x6e0 0x9ac 0x2 0x1 +#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC 0x27c 0x6e0 0x928 0x3 0x4 +#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 0x27c 0x6e0 0x000 0x4 0x0 +#define MX35_PAD_ATA_DATA0__GPIO2_13 0x27c 0x6e0 0x878 0x5 0x1 +#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 0x27c 0x6e0 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 0x27c 0x6e0 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA1__ATA_DATA_1 0x280 0x6e4 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 0x280 0x6e4 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 0x280 0x6e4 0x9b0 0x2 0x1 +#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK 0x280 0x6e4 0x000 0x3 0x0 +#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 0x280 0x6e4 0x000 0x4 0x0 +#define MX35_PAD_ATA_DATA1__GPIO2_14 0x280 0x6e4 0x87c 0x5 0x1 +#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 0x280 0x6e4 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 0x280 0x6e4 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA2__ATA_DATA_2 0x284 0x6e8 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 0x284 0x6e8 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 0x284 0x6e8 0x9b4 0x2 0x1 +#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS 0x284 0x6e8 0x000 0x3 0x0 +#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 0x284 0x6e8 0x000 0x4 0x0 +#define MX35_PAD_ATA_DATA2__GPIO2_15 0x284 0x6e8 0x880 0x5 0x1 +#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 0x284 0x6e8 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 0x284 0x6e8 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA3__ATA_DATA_3 0x288 0x6ec 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA3__ESDHC3_CLK 0x288 0x6ec 0x814 0x1 0x1 +#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 0x288 0x6ec 0x9b8 0x2 0x1 +#define MX35_PAD_ATA_DATA3__CSPI2_SCLK 0x288 0x6ec 0x7e0 0x4 0x2 +#define MX35_PAD_ATA_DATA3__GPIO2_16 0x288 0x6ec 0x884 0x5 0x1 +#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 0x288 0x6ec 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 0x288 0x6ec 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA4__ATA_DATA_4 0x28c 0x6f0 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA4__ESDHC3_CMD 0x28c 0x6f0 0x818 0x1 0x1 +#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 0x28c 0x6f0 0x9bc 0x2 0x1 +#define MX35_PAD_ATA_DATA4__GPIO2_17 0x28c 0x6f0 0x888 0x5 0x1 +#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 0x28c 0x6f0 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 0x28c 0x6f0 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA5__ATA_DATA_5 0x290 0x6f4 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 0x290 0x6f4 0x9c0 0x2 0x1 +#define MX35_PAD_ATA_DATA5__GPIO2_18 0x290 0x6f4 0x88c 0x5 0x1 +#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 0x290 0x6f4 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 0x290 0x6f4 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA6__ATA_DATA_6 0x294 0x6f8 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA6__CAN1_TXCAN 0x294 0x6f8 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA6__UART1_DTR 0x294 0x6f8 0x000 0x2 0x0 +#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD 0x294 0x6f8 0x7b4 0x3 0x0 +#define MX35_PAD_ATA_DATA6__GPIO2_19 0x294 0x6f8 0x890 0x5 0x1 +#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 0x294 0x6f8 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA7__ATA_DATA_7 0x298 0x6fc 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA7__CAN1_RXCAN 0x298 0x6fc 0x7c8 0x1 0x2 +#define MX35_PAD_ATA_DATA7__UART1_DSR 0x298 0x6fc 0x000 0x2 0x0 +#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD 0x298 0x6fc 0x7b0 0x3 0x0 +#define MX35_PAD_ATA_DATA7__GPIO2_20 0x298 0x6fc 0x898 0x5 0x1 +#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 0x298 0x6fc 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA8__ATA_DATA_8 0x29c 0x700 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA8__UART3_RTS 0x29c 0x700 0x99c 0x1 0x1 +#define MX35_PAD_ATA_DATA8__UART1_RI 0x29c 0x700 0x000 0x2 0x0 +#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC 0x29c 0x700 0x7c0 0x3 0x0 +#define MX35_PAD_ATA_DATA8__GPIO2_21 0x29c 0x700 0x89c 0x5 0x1 +#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 0x29c 0x700 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA9__ATA_DATA_9 0x2a0 0x704 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA9__UART3_CTS 0x2a0 0x704 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA9__UART1_DCD 0x2a0 0x704 0x000 0x2 0x0 +#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS 0x2a0 0x704 0x7c4 0x3 0x0 +#define MX35_PAD_ATA_DATA9__GPIO2_22 0x2a0 0x704 0x8a0 0x5 0x1 +#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 0x2a0 0x704 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA10__ATA_DATA_10 0x2a4 0x708 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX 0x2a4 0x708 0x9a0 0x1 0x2 +#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC 0x2a4 0x708 0x7b8 0x3 0x0 +#define MX35_PAD_ATA_DATA10__GPIO2_23 0x2a4 0x708 0x8a4 0x5 0x1 +#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 0x2a4 0x708 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA11__ATA_DATA_11 0x2a8 0x70c 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX 0x2a8 0x70c 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS 0x2a8 0x70c 0x7bc 0x3 0x0 +#define MX35_PAD_ATA_DATA11__GPIO2_24 0x2a8 0x70c 0x8a8 0x5 0x1 +#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 0x2a8 0x70c 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA12__ATA_DATA_12 0x2ac 0x710 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA12__I2C3_SCL 0x2ac 0x710 0x91c 0x1 0x3 +#define MX35_PAD_ATA_DATA12__GPIO2_25 0x2ac 0x710 0x8ac 0x5 0x1 +#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 0x2ac 0x710 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA13__ATA_DATA_13 0x2b0 0x714 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA13__I2C3_SDA 0x2b0 0x714 0x920 0x1 0x3 +#define MX35_PAD_ATA_DATA13__GPIO2_26 0x2b0 0x714 0x8b0 0x5 0x1 +#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 0x2b0 0x714 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA14__ATA_DATA_14 0x2b4 0x718 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 0x2b4 0x718 0x930 0x1 0x2 +#define MX35_PAD_ATA_DATA14__KPP_ROW_0 0x2b4 0x718 0x970 0x3 0x2 +#define MX35_PAD_ATA_DATA14__GPIO2_27 0x2b4 0x718 0x8b4 0x5 0x1 +#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 0x2b4 0x718 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA15__ATA_DATA_15 0x2b8 0x71c 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 0x2b8 0x71c 0x934 0x1 0x2 +#define MX35_PAD_ATA_DATA15__KPP_ROW_1 0x2b8 0x71c 0x974 0x3 0x2 +#define MX35_PAD_ATA_DATA15__GPIO2_28 0x2b8 0x71c 0x8b8 0x5 0x1 +#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 0x2b8 0x71c 0x000 0x6 0x0 +#define MX35_PAD_ATA_INTRQ__ATA_INTRQ 0x2bc 0x720 0x000 0x0 0x0 +#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 0x2bc 0x720 0x938 0x1 0x3 +#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 0x2bc 0x720 0x978 0x3 0x2 +#define MX35_PAD_ATA_INTRQ__GPIO2_29 0x2bc 0x720 0x8bc 0x5 0x1 +#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 0x2bc 0x720 0x000 0x6 0x0 +#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN 0x2c0 0x724 0x000 0x0 0x0 +#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 0x2c0 0x724 0x93c 0x1 0x3 +#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 0x2c0 0x724 0x97c 0x3 0x2 +#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 0x2c0 0x724 0x8c4 0x5 0x1 +#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 0x2c0 0x724 0x000 0x6 0x0 +#define MX35_PAD_ATA_DMARQ__ATA_DMARQ 0x2c4 0x728 0x000 0x0 0x0 +#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 0x2c4 0x728 0x940 0x1 0x2 +#define MX35_PAD_ATA_DMARQ__KPP_COL_0 0x2c4 0x728 0x950 0x3 0x2 +#define MX35_PAD_ATA_DMARQ__GPIO2_31 0x2c4 0x728 0x8c8 0x5 0x1 +#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 0x2c4 0x728 0x000 0x6 0x0 +#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 0x2c4 0x728 0x000 0x7 0x0 +#define MX35_PAD_ATA_DA0__ATA_DA_0 0x2c8 0x72c 0x000 0x0 0x0 +#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 0x2c8 0x72c 0x944 0x1 0x2 +#define MX35_PAD_ATA_DA0__KPP_COL_1 0x2c8 0x72c 0x954 0x3 0x2 +#define MX35_PAD_ATA_DA0__GPIO3_0 0x2c8 0x72c 0x8e8 0x5 0x1 +#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 0x2c8 0x72c 0x000 0x6 0x0 +#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 0x2c8 0x72c 0x000 0x7 0x0 +#define MX35_PAD_ATA_DA1__ATA_DA_1 0x2cc 0x730 0x000 0x0 0x0 +#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 0x2cc 0x730 0x948 0x1 0x2 +#define MX35_PAD_ATA_DA1__KPP_COL_2 0x2cc 0x730 0x958 0x3 0x2 +#define MX35_PAD_ATA_DA1__GPIO3_1 0x2cc 0x730 0x000 0x5 0x0 +#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 0x2cc 0x730 0x000 0x6 0x0 +#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 0x2cc 0x730 0x000 0x7 0x0 +#define MX35_PAD_ATA_DA2__ATA_DA_2 0x2d0 0x734 0x000 0x0 0x0 +#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 0x2d0 0x734 0x94c 0x1 0x2 +#define MX35_PAD_ATA_DA2__KPP_COL_3 0x2d0 0x734 0x95c 0x3 0x2 +#define MX35_PAD_ATA_DA2__GPIO3_2 0x2d0 0x734 0x000 0x5 0x0 +#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 0x2d0 0x734 0x000 0x6 0x0 +#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 0x2d0 0x734 0x000 0x7 0x0 +#define MX35_PAD_MLB_CLK__MLB_MLBCLK 0x2d4 0x738 0x000 0x0 0x0 +#define MX35_PAD_MLB_CLK__GPIO3_3 0x2d4 0x738 0x000 0x5 0x0 +#define MX35_PAD_MLB_DAT__MLB_MLBDAT 0x2d8 0x73c 0x000 0x0 0x0 +#define MX35_PAD_MLB_DAT__GPIO3_4 0x2d8 0x73c 0x904 0x5 0x1 +#define MX35_PAD_MLB_SIG__MLB_MLBSIG 0x2dc 0x740 0x000 0x0 0x0 +#define MX35_PAD_MLB_SIG__GPIO3_5 0x2dc 0x740 0x908 0x5 0x1 +#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x2e0 0x744 0x000 0x0 0x0 +#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 0x2e0 0x744 0x804 0x1 0x1 +#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX 0x2e0 0x744 0x9a0 0x2 0x3 +#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR 0x2e0 0x744 0x9ec 0x3 0x1 +#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI 0x2e0 0x744 0x7ec 0x4 0x3 +#define MX35_PAD_FEC_TX_CLK__GPIO3_6 0x2e0 0x744 0x90c 0x5 0x1 +#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC 0x2e0 0x744 0x928 0x6 0x5 +#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 0x2e0 0x744 0x000 0x7 0x0 +#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x2e4 0x748 0x000 0x0 0x0 +#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 0x2e4 0x748 0x808 0x1 0x1 +#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX 0x2e4 0x748 0x000 0x2 0x0 +#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP 0x2e4 0x748 0x000 0x3 0x0 +#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO 0x2e4 0x748 0x7e8 0x4 0x3 +#define MX35_PAD_FEC_RX_CLK__GPIO3_7 0x2e4 0x748 0x910 0x5 0x1 +#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I 0x2e4 0x748 0x92c 0x6 0x4 +#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 0x2e4 0x748 0x000 0x7 0x0 +#define MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x2e8 0x74c 0x000 0x0 0x0 +#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 0x2e8 0x74c 0x80c 0x1 0x1 +#define MX35_PAD_FEC_RX_DV__UART3_RTS 0x2e8 0x74c 0x99c 0x2 0x2 +#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT 0x2e8 0x74c 0x9f0 0x3 0x1 +#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK 0x2e8 0x74c 0x7e0 0x4 0x3 +#define MX35_PAD_FEC_RX_DV__GPIO3_8 0x2e8 0x74c 0x914 0x5 0x1 +#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK 0x2e8 0x74c 0x000 0x6 0x0 +#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 0x2e8 0x74c 0x000 0x7 0x0 +#define MX35_PAD_FEC_COL__FEC_COL 0x2ec 0x750 0x000 0x0 0x0 +#define MX35_PAD_FEC_COL__ESDHC1_DAT7 0x2ec 0x750 0x810 0x1 0x1 +#define MX35_PAD_FEC_COL__UART3_CTS 0x2ec 0x750 0x000 0x2 0x0 +#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 0x2ec 0x750 0x9cc 0x3 0x1 +#define MX35_PAD_FEC_COL__CSPI2_RDY 0x2ec 0x750 0x7e4 0x4 0x3 +#define MX35_PAD_FEC_COL__GPIO3_9 0x2ec 0x750 0x918 0x5 0x1 +#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS 0x2ec 0x750 0x000 0x6 0x0 +#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 0x2ec 0x750 0x000 0x7 0x0 +#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x2f0 0x754 0x000 0x0 0x0 +#define MX35_PAD_FEC_RDATA0__PWM_PWMO 0x2f0 0x754 0x000 0x1 0x0 +#define MX35_PAD_FEC_RDATA0__UART3_DTR 0x2f0 0x754 0x000 0x2 0x0 +#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 0x2f0 0x754 0x9d0 0x3 0x1 +#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 0x2f0 0x754 0x7f0 0x4 0x2 +#define MX35_PAD_FEC_RDATA0__GPIO3_10 0x2f0 0x754 0x8ec 0x5 0x1 +#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 0x2f0 0x754 0x000 0x6 0x0 +#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 0x2f0 0x754 0x000 0x7 0x0 +#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x2f4 0x758 0x000 0x0 0x0 +#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 0x2f4 0x758 0x000 0x1 0x0 +#define MX35_PAD_FEC_TDATA0__UART3_DSR 0x2f4 0x758 0x000 0x2 0x0 +#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 0x2f4 0x758 0x9d4 0x3 0x1 +#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 0x2f4 0x758 0x7f4 0x4 0x2 +#define MX35_PAD_FEC_TDATA0__GPIO3_11 0x2f4 0x758 0x8f0 0x5 0x1 +#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 0x2f4 0x758 0x000 0x6 0x0 +#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 0x2f4 0x758 0x000 0x7 0x0 +#define MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x2f8 0x75c 0x000 0x0 0x0 +#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 0x2f8 0x75c 0x998 0x1 0x3 +#define MX35_PAD_FEC_TX_EN__UART3_RI 0x2f8 0x75c 0x000 0x2 0x0 +#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 0x2f8 0x75c 0x9d8 0x3 0x1 +#define MX35_PAD_FEC_TX_EN__GPIO3_12 0x2f8 0x75c 0x8f4 0x5 0x1 +#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS 0x2f8 0x75c 0x000 0x6 0x0 +#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 0x2f8 0x75c 0x000 0x7 0x0 +#define MX35_PAD_FEC_MDC__FEC_MDC 0x2fc 0x760 0x000 0x0 0x0 +#define MX35_PAD_FEC_MDC__CAN2_TXCAN 0x2fc 0x760 0x000 0x1 0x0 +#define MX35_PAD_FEC_MDC__UART3_DCD 0x2fc 0x760 0x000 0x2 0x0 +#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 0x2fc 0x760 0x9dc 0x3 0x1 +#define MX35_PAD_FEC_MDC__GPIO3_13 0x2fc 0x760 0x8f8 0x5 0x1 +#define MX35_PAD_FEC_MDC__IPU_DISPB_WR 0x2fc 0x760 0x000 0x6 0x0 +#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 0x2fc 0x760 0x000 0x7 0x0 +#define MX35_PAD_FEC_MDIO__FEC_MDIO 0x300 0x764 0x000 0x0 0x0 +#define MX35_PAD_FEC_MDIO__CAN2_RXCAN 0x300 0x764 0x7cc 0x1 0x2 +#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 0x300 0x764 0x9e0 0x3 0x1 +#define MX35_PAD_FEC_MDIO__GPIO3_14 0x300 0x764 0x8fc 0x5 0x1 +#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD 0x300 0x764 0x000 0x6 0x0 +#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 0x300 0x764 0x000 0x7 0x0 +#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x304 0x768 0x000 0x0 0x0 +#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE 0x304 0x768 0x990 0x1 0x2 +#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK 0x304 0x768 0x994 0x2 0x4 +#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 0x304 0x768 0x9e4 0x3 0x1 +#define MX35_PAD_FEC_TX_ERR__GPIO3_15 0x304 0x768 0x900 0x5 0x1 +#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC 0x304 0x768 0x924 0x6 0x3 +#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 0x304 0x768 0x000 0x7 0x0 +#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x308 0x76c 0x000 0x0 0x0 +#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 0x308 0x76c 0x930 0x1 0x3 +#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 0x308 0x76c 0x9e8 0x3 0x1 +#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 0x308 0x76c 0x960 0x4 0x1 +#define MX35_PAD_FEC_RX_ERR__GPIO3_16 0x308 0x76c 0x000 0x5 0x0 +#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO 0x308 0x76c 0x92c 0x6 0x5 +#define MX35_PAD_FEC_CRS__FEC_CRS 0x30c 0x770 0x000 0x0 0x0 +#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 0x30c 0x770 0x934 0x1 0x3 +#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR 0x30c 0x770 0x000 0x3 0x0 +#define MX35_PAD_FEC_CRS__KPP_COL_5 0x30c 0x770 0x964 0x4 0x1 +#define MX35_PAD_FEC_CRS__GPIO3_17 0x30c 0x770 0x000 0x5 0x0 +#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE 0x30c 0x770 0x000 0x6 0x0 +#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x310 0x774 0x000 0x0 0x0 +#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 0x310 0x774 0x938 0x1 0x4 +#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC 0x310 0x774 0x000 0x2 0x0 +#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC 0x310 0x774 0x9f4 0x3 0x2 +#define MX35_PAD_FEC_RDATA1__KPP_COL_6 0x310 0x774 0x968 0x4 0x1 +#define MX35_PAD_FEC_RDATA1__GPIO3_18 0x310 0x774 0x000 0x5 0x0 +#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 0x310 0x774 0x000 0x6 0x0 +#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x314 0x778 0x000 0x0 0x0 +#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 0x314 0x778 0x93c 0x1 0x4 +#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS 0x314 0x778 0x7bc 0x2 0x1 +#define MX35_PAD_FEC_TDATA1__KPP_COL_7 0x314 0x778 0x96c 0x4 0x1 +#define MX35_PAD_FEC_TDATA1__GPIO3_19 0x314 0x778 0x000 0x5 0x0 +#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 0x314 0x778 0x000 0x6 0x0 +#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x318 0x77c 0x000 0x0 0x0 +#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 0x318 0x77c 0x940 0x1 0x3 +#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD 0x318 0x77c 0x7b4 0x2 0x1 +#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 0x318 0x77c 0x980 0x4 0x1 +#define MX35_PAD_FEC_RDATA2__GPIO3_20 0x318 0x77c 0x000 0x5 0x0 +#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x31c 0x780 0x000 0x0 0x0 +#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 0x31c 0x780 0x944 0x1 0x3 +#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD 0x31c 0x780 0x7b0 0x2 0x1 +#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 0x31c 0x780 0x984 0x4 0x1 +#define MX35_PAD_FEC_TDATA2__GPIO3_21 0x31c 0x780 0x000 0x5 0x0 +#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x320 0x784 0x000 0x0 0x0 +#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 0x320 0x784 0x948 0x1 0x3 +#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC 0x320 0x784 0x7c0 0x2 0x1 +#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 0x320 0x784 0x988 0x4 0x1 +#define MX35_PAD_FEC_RDATA3__GPIO3_22 0x320 0x784 0x000 0x6 0x0 +#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x324 0x788 0x000 0x0 0x0 +#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 0x324 0x788 0x94c 0x1 0x3 +#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS 0x324 0x788 0x7c4 0x2 0x1 +#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 0x324 0x788 0x98c 0x4 0x1 +#define MX35_PAD_FEC_TDATA3__GPIO3_23 0x324 0x788 0x000 0x5 0x0 +#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK 0x000 0x78c 0x000 0x0 0x0 +#define MX35_PAD_TEST_MODE__TCU_TEST_MODE 0x000 0x790 0x000 0x0 0x0 + +#endif /* __DTS_IMX35_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index 92d3a66a69e2..2bcf6981d490 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "imx51.dtsi" +#include "imx51.dtsi" / { model = "Armadeus Systems APF51 module"; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts new file mode 100644 index 000000000000..123fe84e0e8c --- /dev/null +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -0,0 +1,97 @@ +/* + * Copyright 2013 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* APF51Dev is a docking board for the APF51 SOM */ +#include "imx51-apf51.dts" + +/ { + model = "Armadeus Systems APF51Dev docking/development board"; + compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51"; + + gpio-keys { + compatible = "gpio-keys"; + + user-key { + label = "user"; + gpios = <&gpio1 3 0>; + linux,code = <256>; /* BTN_0 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio1 2 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 28 1>, <&gpio3 27 1>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio2 29 0>; + bus-width = <4>; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX51_PAD_EIM_EB2__GPIO2_22 0x0C5 + MX51_PAD_EIM_EB3__GPIO2_23 0x0C5 + MX51_PAD_EIM_CS4__GPIO2_29 0x100 + MX51_PAD_NANDF_D13__GPIO3_27 0x0C5 + MX51_PAD_NANDF_D12__GPIO3_28 0x0C5 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5 + MX51_PAD_GPIO1_2__GPIO1_2 0x0C5 + MX51_PAD_GPIO1_3__GPIO1_3 0x0C5 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index aab6e43219af..6dd9486c755b 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx51.dtsi" +#include "imx51.dtsi" / { model = "Freescale i.MX51 Babbage Board"; @@ -222,13 +222,13 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ - 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ - 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ - 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ - 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ - 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ - 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ + MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_1__SD1_WP 0x20d5 + MX51_PAD_GPIO1_5__GPIO1_5 0x100 + MX51_PAD_GPIO1_6__GPIO1_6 0x100 + MX51_PAD_EIM_A27__GPIO2_21 0x5 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 >; }; }; diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h new file mode 100644 index 000000000000..9eb92abaeb6d --- /dev/null +++ b/arch/arm/boot/dts/imx51-pinfunc.h @@ -0,0 +1,773 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX51_PINFUNC_H +#define __DTS_IMX51_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX51_PAD_EIM_D16__AUD4_RXFS 0x05c 0x3f0 0x000 0x5 0x0 +#define MX51_PAD_EIM_D16__AUD5_TXD 0x05c 0x3f0 0x8d8 0x7 0x0 +#define MX51_PAD_EIM_D16__EIM_D16 0x05c 0x3f0 0x000 0x0 0x0 +#define MX51_PAD_EIM_D16__GPIO2_0 0x05c 0x3f0 0x000 0x1 0x0 +#define MX51_PAD_EIM_D16__I2C1_SDA 0x05c 0x3f0 0x9b4 0x4 0x0 +#define MX51_PAD_EIM_D16__UART2_CTS 0x05c 0x3f0 0x000 0x3 0x0 +#define MX51_PAD_EIM_D16__USBH2_DATA0 0x05c 0x3f0 0x000 0x2 0x0 +#define MX51_PAD_EIM_D17__AUD5_RXD 0x060 0x3f4 0x8d4 0x7 0x0 +#define MX51_PAD_EIM_D17__EIM_D17 0x060 0x3f4 0x000 0x0 0x0 +#define MX51_PAD_EIM_D17__GPIO2_1 0x060 0x3f4 0x000 0x1 0x0 +#define MX51_PAD_EIM_D17__UART2_RXD 0x060 0x3f4 0x9ec 0x3 0x0 +#define MX51_PAD_EIM_D17__UART3_CTS 0x060 0x3f4 0x000 0x4 0x0 +#define MX51_PAD_EIM_D17__USBH2_DATA1 0x060 0x3f4 0x000 0x2 0x0 +#define MX51_PAD_EIM_D18__AUD5_TXC 0x064 0x3f8 0x8e4 0x7 0x0 +#define MX51_PAD_EIM_D18__EIM_D18 0x064 0x3f8 0x000 0x0 0x0 +#define MX51_PAD_EIM_D18__GPIO2_2 0x064 0x3f8 0x000 0x1 0x0 +#define MX51_PAD_EIM_D18__UART2_TXD 0x064 0x3f8 0x000 0x3 0x0 +#define MX51_PAD_EIM_D18__UART3_RTS 0x064 0x3f8 0x9f0 0x4 0x1 +#define MX51_PAD_EIM_D18__USBH2_DATA2 0x064 0x3f8 0x000 0x2 0x0 +#define MX51_PAD_EIM_D19__AUD4_RXC 0x068 0x3fc 0x000 0x5 0x0 +#define MX51_PAD_EIM_D19__AUD5_TXFS 0x068 0x3fc 0x8e8 0x7 0x0 +#define MX51_PAD_EIM_D19__EIM_D19 0x068 0x3fc 0x000 0x0 0x0 +#define MX51_PAD_EIM_D19__GPIO2_3 0x068 0x3fc 0x000 0x1 0x0 +#define MX51_PAD_EIM_D19__I2C1_SCL 0x068 0x3fc 0x9b0 0x4 0x0 +#define MX51_PAD_EIM_D19__UART2_RTS 0x068 0x3fc 0x9e8 0x3 0x1 +#define MX51_PAD_EIM_D19__USBH2_DATA3 0x068 0x3fc 0x000 0x2 0x0 +#define MX51_PAD_EIM_D20__AUD4_TXD 0x06c 0x400 0x8c8 0x5 0x0 +#define MX51_PAD_EIM_D20__EIM_D20 0x06c 0x400 0x000 0x0 0x0 +#define MX51_PAD_EIM_D20__GPIO2_4 0x06c 0x400 0x000 0x1 0x0 +#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB 0x06c 0x400 0x000 0x4 0x0 +#define MX51_PAD_EIM_D20__USBH2_DATA4 0x06c 0x400 0x000 0x2 0x0 +#define MX51_PAD_EIM_D21__AUD4_RXD 0x070 0x404 0x8c4 0x5 0x0 +#define MX51_PAD_EIM_D21__EIM_D21 0x070 0x404 0x000 0x0 0x0 +#define MX51_PAD_EIM_D21__GPIO2_5 0x070 0x404 0x000 0x1 0x0 +#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB 0x070 0x404 0x000 0x3 0x0 +#define MX51_PAD_EIM_D21__USBH2_DATA5 0x070 0x404 0x000 0x2 0x0 +#define MX51_PAD_EIM_D22__AUD4_TXC 0x074 0x408 0x8cc 0x5 0x0 +#define MX51_PAD_EIM_D22__EIM_D22 0x074 0x408 0x000 0x0 0x0 +#define MX51_PAD_EIM_D22__GPIO2_6 0x074 0x408 0x000 0x1 0x0 +#define MX51_PAD_EIM_D22__USBH2_DATA6 0x074 0x408 0x000 0x2 0x0 +#define MX51_PAD_EIM_D23__AUD4_TXFS 0x078 0x40c 0x8d0 0x5 0x0 +#define MX51_PAD_EIM_D23__EIM_D23 0x078 0x40c 0x000 0x0 0x0 +#define MX51_PAD_EIM_D23__GPIO2_7 0x078 0x40c 0x000 0x1 0x0 +#define MX51_PAD_EIM_D23__SPDIF_OUT1 0x078 0x40c 0x000 0x4 0x0 +#define MX51_PAD_EIM_D23__USBH2_DATA7 0x078 0x40c 0x000 0x2 0x0 +#define MX51_PAD_EIM_D24__AUD6_RXFS 0x07c 0x410 0x8f8 0x5 0x0 +#define MX51_PAD_EIM_D24__EIM_D24 0x07c 0x410 0x000 0x0 0x0 +#define MX51_PAD_EIM_D24__GPIO2_8 0x07c 0x410 0x000 0x1 0x0 +#define MX51_PAD_EIM_D24__I2C2_SDA 0x07c 0x410 0x9bc 0x4 0x0 +#define MX51_PAD_EIM_D24__UART3_CTS 0x07c 0x410 0x000 0x3 0x0 +#define MX51_PAD_EIM_D24__USBOTG_DATA0 0x07c 0x410 0x000 0x2 0x0 +#define MX51_PAD_EIM_D25__EIM_D25 0x080 0x414 0x000 0x0 0x0 +#define MX51_PAD_EIM_D25__KEY_COL6 0x080 0x414 0x9c8 0x1 0x0 +#define MX51_PAD_EIM_D25__UART2_CTS 0x080 0x414 0x000 0x4 0x0 +#define MX51_PAD_EIM_D25__UART3_RXD 0x080 0x414 0x9f4 0x3 0x0 +#define MX51_PAD_EIM_D25__USBOTG_DATA1 0x080 0x414 0x000 0x2 0x0 +#define MX51_PAD_EIM_D26__EIM_D26 0x084 0x418 0x000 0x0 0x0 +#define MX51_PAD_EIM_D26__KEY_COL7 0x084 0x418 0x9cc 0x1 0x0 +#define MX51_PAD_EIM_D26__UART2_RTS 0x084 0x418 0x9e8 0x4 0x3 +#define MX51_PAD_EIM_D26__UART3_TXD 0x084 0x418 0x000 0x3 0x0 +#define MX51_PAD_EIM_D26__USBOTG_DATA2 0x084 0x418 0x000 0x2 0x0 +#define MX51_PAD_EIM_D27__AUD6_RXC 0x088 0x41c 0x8f4 0x5 0x0 +#define MX51_PAD_EIM_D27__EIM_D27 0x088 0x41c 0x000 0x0 0x0 +#define MX51_PAD_EIM_D27__GPIO2_9 0x088 0x41c 0x000 0x1 0x0 +#define MX51_PAD_EIM_D27__I2C2_SCL 0x088 0x41c 0x9b8 0x4 0x0 +#define MX51_PAD_EIM_D27__UART3_RTS 0x088 0x41c 0x9f0 0x3 0x3 +#define MX51_PAD_EIM_D27__USBOTG_DATA3 0x088 0x41c 0x000 0x2 0x0 +#define MX51_PAD_EIM_D28__AUD6_TXD 0x08c 0x420 0x8f0 0x5 0x0 +#define MX51_PAD_EIM_D28__EIM_D28 0x08c 0x420 0x000 0x0 0x0 +#define MX51_PAD_EIM_D28__KEY_ROW4 0x08c 0x420 0x9d0 0x1 0x0 +#define MX51_PAD_EIM_D28__USBOTG_DATA4 0x08c 0x420 0x000 0x2 0x0 +#define MX51_PAD_EIM_D29__AUD6_RXD 0x090 0x424 0x8ec 0x5 0x0 +#define MX51_PAD_EIM_D29__EIM_D29 0x090 0x424 0x000 0x0 0x0 +#define MX51_PAD_EIM_D29__KEY_ROW5 0x090 0x424 0x9d4 0x1 0x0 +#define MX51_PAD_EIM_D29__USBOTG_DATA5 0x090 0x424 0x000 0x2 0x0 +#define MX51_PAD_EIM_D30__AUD6_TXC 0x094 0x428 0x8fc 0x5 0x0 +#define MX51_PAD_EIM_D30__EIM_D30 0x094 0x428 0x000 0x0 0x0 +#define MX51_PAD_EIM_D30__KEY_ROW6 0x094 0x428 0x9d8 0x1 0x0 +#define MX51_PAD_EIM_D30__USBOTG_DATA6 0x094 0x428 0x000 0x2 0x0 +#define MX51_PAD_EIM_D31__AUD6_TXFS 0x098 0x42c 0x900 0x5 0x0 +#define MX51_PAD_EIM_D31__EIM_D31 0x098 0x42c 0x000 0x0 0x0 +#define MX51_PAD_EIM_D31__KEY_ROW7 0x098 0x42c 0x9dc 0x1 0x0 +#define MX51_PAD_EIM_D31__USBOTG_DATA7 0x098 0x42c 0x000 0x2 0x0 +#define MX51_PAD_EIM_A16__EIM_A16 0x09c 0x430 0x000 0x0 0x0 +#define MX51_PAD_EIM_A16__GPIO2_10 0x09c 0x430 0x000 0x1 0x0 +#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 0x09c 0x430 0x000 0x7 0x0 +#define MX51_PAD_EIM_A17__EIM_A17 0x0a0 0x434 0x000 0x0 0x0 +#define MX51_PAD_EIM_A17__GPIO2_11 0x0a0 0x434 0x000 0x1 0x0 +#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 0x0a0 0x434 0x000 0x7 0x0 +#define MX51_PAD_EIM_A18__BOOT_LPB0 0x0a4 0x438 0x000 0x7 0x0 +#define MX51_PAD_EIM_A18__EIM_A18 0x0a4 0x438 0x000 0x0 0x0 +#define MX51_PAD_EIM_A18__GPIO2_12 0x0a4 0x438 0x000 0x1 0x0 +#define MX51_PAD_EIM_A19__BOOT_LPB1 0x0a8 0x43c 0x000 0x7 0x0 +#define MX51_PAD_EIM_A19__EIM_A19 0x0a8 0x43c 0x000 0x0 0x0 +#define MX51_PAD_EIM_A19__GPIO2_13 0x0a8 0x43c 0x000 0x1 0x0 +#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 0x0ac 0x440 0x000 0x7 0x0 +#define MX51_PAD_EIM_A20__EIM_A20 0x0ac 0x440 0x000 0x0 0x0 +#define MX51_PAD_EIM_A20__GPIO2_14 0x0ac 0x440 0x000 0x1 0x0 +#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 0x0b0 0x444 0x000 0x7 0x0 +#define MX51_PAD_EIM_A21__EIM_A21 0x0b0 0x444 0x000 0x0 0x0 +#define MX51_PAD_EIM_A21__GPIO2_15 0x0b0 0x444 0x000 0x1 0x0 +#define MX51_PAD_EIM_A22__EIM_A22 0x0b4 0x448 0x000 0x0 0x0 +#define MX51_PAD_EIM_A22__GPIO2_16 0x0b4 0x448 0x000 0x1 0x0 +#define MX51_PAD_EIM_A23__BOOT_HPN_EN 0x0b8 0x44c 0x000 0x7 0x0 +#define MX51_PAD_EIM_A23__EIM_A23 0x0b8 0x44c 0x000 0x0 0x0 +#define MX51_PAD_EIM_A23__GPIO2_17 0x0b8 0x44c 0x000 0x1 0x0 +#define MX51_PAD_EIM_A24__EIM_A24 0x0bc 0x450 0x000 0x0 0x0 +#define MX51_PAD_EIM_A24__GPIO2_18 0x0bc 0x450 0x000 0x1 0x0 +#define MX51_PAD_EIM_A24__USBH2_CLK 0x0bc 0x450 0x000 0x2 0x0 +#define MX51_PAD_EIM_A25__DISP1_PIN4 0x0c0 0x454 0x000 0x6 0x0 +#define MX51_PAD_EIM_A25__EIM_A25 0x0c0 0x454 0x000 0x0 0x0 +#define MX51_PAD_EIM_A25__GPIO2_19 0x0c0 0x454 0x000 0x1 0x0 +#define MX51_PAD_EIM_A25__USBH2_DIR 0x0c0 0x454 0x000 0x2 0x0 +#define MX51_PAD_EIM_A26__CSI1_DATA_EN 0x0c4 0x458 0x9a0 0x5 0x0 +#define MX51_PAD_EIM_A26__DISP2_EXT_CLK 0x0c4 0x458 0x908 0x6 0x0 +#define MX51_PAD_EIM_A26__EIM_A26 0x0c4 0x458 0x000 0x0 0x0 +#define MX51_PAD_EIM_A26__GPIO2_20 0x0c4 0x458 0x000 0x1 0x0 +#define MX51_PAD_EIM_A26__USBH2_STP 0x0c4 0x458 0x000 0x2 0x0 +#define MX51_PAD_EIM_A27__CSI2_DATA_EN 0x0c8 0x45c 0x99c 0x5 0x0 +#define MX51_PAD_EIM_A27__DISP1_PIN1 0x0c8 0x45c 0x9a4 0x6 0x0 +#define MX51_PAD_EIM_A27__EIM_A27 0x0c8 0x45c 0x000 0x0 0x0 +#define MX51_PAD_EIM_A27__GPIO2_21 0x0c8 0x45c 0x000 0x1 0x0 +#define MX51_PAD_EIM_A27__USBH2_NXT 0x0c8 0x45c 0x000 0x2 0x0 +#define MX51_PAD_EIM_EB0__EIM_EB0 0x0cc 0x460 0x000 0x0 0x0 +#define MX51_PAD_EIM_EB1__EIM_EB1 0x0d0 0x464 0x000 0x0 0x0 +#define MX51_PAD_EIM_EB2__AUD5_RXFS 0x0d4 0x468 0x8e0 0x6 0x0 +#define MX51_PAD_EIM_EB2__CSI1_D2 0x0d4 0x468 0x000 0x5 0x0 +#define MX51_PAD_EIM_EB2__EIM_EB2 0x0d4 0x468 0x000 0x0 0x0 +#define MX51_PAD_EIM_EB2__FEC_MDIO 0x0d4 0x468 0x954 0x3 0x0 +#define MX51_PAD_EIM_EB2__GPIO2_22 0x0d4 0x468 0x000 0x1 0x0 +#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 0x0d4 0x468 0x000 0x7 0x0 +#define MX51_PAD_EIM_EB3__AUD5_RXC 0x0d8 0x46c 0x8dc 0x6 0x0 +#define MX51_PAD_EIM_EB3__CSI1_D3 0x0d8 0x46c 0x000 0x5 0x0 +#define MX51_PAD_EIM_EB3__EIM_EB3 0x0d8 0x46c 0x000 0x0 0x0 +#define MX51_PAD_EIM_EB3__FEC_RDATA1 0x0d8 0x46c 0x95c 0x3 0x0 +#define MX51_PAD_EIM_EB3__GPIO2_23 0x0d8 0x46c 0x000 0x1 0x0 +#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 0x0d8 0x46c 0x000 0x7 0x0 +#define MX51_PAD_EIM_OE__EIM_OE 0x0dc 0x470 0x000 0x0 0x0 +#define MX51_PAD_EIM_OE__GPIO2_24 0x0dc 0x470 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS0__EIM_CS0 0x0e0 0x474 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS0__GPIO2_25 0x0e0 0x474 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS1__EIM_CS1 0x0e4 0x478 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS1__GPIO2_26 0x0e4 0x478 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS2__AUD5_TXD 0x0e8 0x47c 0x8d8 0x6 0x1 +#define MX51_PAD_EIM_CS2__CSI1_D4 0x0e8 0x47c 0x000 0x5 0x0 +#define MX51_PAD_EIM_CS2__EIM_CS2 0x0e8 0x47c 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS2__FEC_RDATA2 0x0e8 0x47c 0x960 0x3 0x0 +#define MX51_PAD_EIM_CS2__GPIO2_27 0x0e8 0x47c 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS2__USBOTG_STP 0x0e8 0x47c 0x000 0x2 0x0 +#define MX51_PAD_EIM_CS3__AUD5_RXD 0x0ec 0x480 0x8d4 0x6 0x1 +#define MX51_PAD_EIM_CS3__CSI1_D5 0x0ec 0x480 0x000 0x5 0x0 +#define MX51_PAD_EIM_CS3__EIM_CS3 0x0ec 0x480 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS3__FEC_RDATA3 0x0ec 0x480 0x964 0x3 0x0 +#define MX51_PAD_EIM_CS3__GPIO2_28 0x0ec 0x480 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS3__USBOTG_NXT 0x0ec 0x480 0x000 0x2 0x0 +#define MX51_PAD_EIM_CS4__AUD5_TXC 0x0f0 0x484 0x8e4 0x6 0x1 +#define MX51_PAD_EIM_CS4__CSI1_D6 0x0f0 0x484 0x000 0x5 0x0 +#define MX51_PAD_EIM_CS4__EIM_CS4 0x0f0 0x484 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS4__FEC_RX_ER 0x0f0 0x484 0x970 0x3 0x0 +#define MX51_PAD_EIM_CS4__GPIO2_29 0x0f0 0x484 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS4__USBOTG_CLK 0x0f0 0x484 0x000 0x2 0x0 +#define MX51_PAD_EIM_CS5__AUD5_TXFS 0x0f4 0x488 0x8e8 0x6 0x1 +#define MX51_PAD_EIM_CS5__CSI1_D7 0x0f4 0x488 0x000 0x5 0x0 +#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK 0x0f4 0x488 0x904 0x4 0x0 +#define MX51_PAD_EIM_CS5__EIM_CS5 0x0f4 0x488 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS5__FEC_CRS 0x0f4 0x488 0x950 0x3 0x0 +#define MX51_PAD_EIM_CS5__GPIO2_30 0x0f4 0x488 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS5__USBOTG_DIR 0x0f4 0x488 0x000 0x2 0x0 +#define MX51_PAD_EIM_DTACK__EIM_DTACK 0x0f8 0x48c 0x000 0x0 0x0 +#define MX51_PAD_EIM_DTACK__GPIO2_31 0x0f8 0x48c 0x000 0x1 0x0 +#define MX51_PAD_EIM_LBA__EIM_LBA 0x0fc 0x494 0x000 0x0 0x0 +#define MX51_PAD_EIM_LBA__GPIO3_1 0x0fc 0x494 0x978 0x1 0x0 +#define MX51_PAD_EIM_CRE__EIM_CRE 0x100 0x4a0 0x000 0x0 0x0 +#define MX51_PAD_EIM_CRE__GPIO3_2 0x100 0x4a0 0x97c 0x1 0x0 +#define MX51_PAD_DRAM_CS1__DRAM_CS1 0x104 0x4d0 0x000 0x0 0x0 +#define MX51_PAD_NANDF_WE_B__GPIO3_3 0x108 0x4e4 0x980 0x3 0x0 +#define MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x108 0x4e4 0x000 0x0 0x0 +#define MX51_PAD_NANDF_WE_B__PATA_DIOW 0x108 0x4e4 0x000 0x1 0x0 +#define MX51_PAD_NANDF_WE_B__SD3_DATA0 0x108 0x4e4 0x93c 0x2 0x0 +#define MX51_PAD_NANDF_RE_B__GPIO3_4 0x10c 0x4e8 0x984 0x3 0x0 +#define MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x10c 0x4e8 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RE_B__PATA_DIOR 0x10c 0x4e8 0x000 0x1 0x0 +#define MX51_PAD_NANDF_RE_B__SD3_DATA1 0x10c 0x4e8 0x940 0x2 0x0 +#define MX51_PAD_NANDF_ALE__GPIO3_5 0x110 0x4ec 0x988 0x3 0x0 +#define MX51_PAD_NANDF_ALE__NANDF_ALE 0x110 0x4ec 0x000 0x0 0x0 +#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x110 0x4ec 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CLE__GPIO3_6 0x114 0x4f0 0x98c 0x3 0x0 +#define MX51_PAD_NANDF_CLE__NANDF_CLE 0x114 0x4f0 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CLE__PATA_RESET_B 0x114 0x4f0 0x000 0x1 0x0 +#define MX51_PAD_NANDF_WP_B__GPIO3_7 0x118 0x4f4 0x990 0x3 0x0 +#define MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x118 0x4f4 0x000 0x0 0x0 +#define MX51_PAD_NANDF_WP_B__PATA_DMACK 0x118 0x4f4 0x000 0x1 0x0 +#define MX51_PAD_NANDF_WP_B__SD3_DATA2 0x118 0x4f4 0x944 0x2 0x0 +#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 0x11c 0x4f8 0x930 0x5 0x0 +#define MX51_PAD_NANDF_RB0__GPIO3_8 0x11c 0x4f8 0x994 0x3 0x0 +#define MX51_PAD_NANDF_RB0__NANDF_RB0 0x11c 0x4f8 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RB0__PATA_DMARQ 0x11c 0x4f8 0x000 0x1 0x0 +#define MX51_PAD_NANDF_RB0__SD3_DATA3 0x11c 0x4f8 0x948 0x2 0x0 +#define MX51_PAD_NANDF_RB1__CSPI_MOSI 0x120 0x4fc 0x91c 0x6 0x0 +#define MX51_PAD_NANDF_RB1__ECSPI2_RDY 0x120 0x4fc 0x000 0x2 0x0 +#define MX51_PAD_NANDF_RB1__GPIO3_9 0x120 0x4fc 0x000 0x3 0x0 +#define MX51_PAD_NANDF_RB1__NANDF_RB1 0x120 0x4fc 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RB1__PATA_IORDY 0x120 0x4fc 0x000 0x1 0x0 +#define MX51_PAD_NANDF_RB1__SD4_CMD 0x120 0x4fc 0x000 0x5 0x0 +#define MX51_PAD_NANDF_RB2__DISP2_WAIT 0x124 0x500 0x9a8 0x5 0x0 +#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x124 0x500 0x000 0x2 0x0 +#define MX51_PAD_NANDF_RB2__FEC_COL 0x124 0x500 0x94c 0x1 0x0 +#define MX51_PAD_NANDF_RB2__GPIO3_10 0x124 0x500 0x000 0x3 0x0 +#define MX51_PAD_NANDF_RB2__NANDF_RB2 0x124 0x500 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RB2__USBH3_H3_DP 0x124 0x500 0x000 0x7 0x0 +#define MX51_PAD_NANDF_RB2__USBH3_NXT 0x124 0x500 0xa20 0x6 0x0 +#define MX51_PAD_NANDF_RB3__DISP1_WAIT 0x128 0x504 0x000 0x5 0x0 +#define MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x128 0x504 0x000 0x2 0x0 +#define MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x128 0x504 0x968 0x1 0x0 +#define MX51_PAD_NANDF_RB3__GPIO3_11 0x128 0x504 0x000 0x3 0x0 +#define MX51_PAD_NANDF_RB3__NANDF_RB3 0x128 0x504 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RB3__USBH3_CLK 0x128 0x504 0x9f8 0x6 0x0 +#define MX51_PAD_NANDF_RB3__USBH3_H3_DM 0x128 0x504 0x000 0x7 0x0 +#define MX51_PAD_GPIO_NAND__GPIO_NAND 0x12c 0x514 0x998 0x0 0x0 +#define MX51_PAD_GPIO_NAND__PATA_INTRQ 0x12c 0x514 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS0__GPIO3_16 0x130 0x518 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS0__NANDF_CS0 0x130 0x518 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS1__GPIO3_17 0x134 0x51c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS1__NANDF_CS1 0x134 0x51c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS2__CSPI_SCLK 0x138 0x520 0x914 0x6 0x0 +#define MX51_PAD_NANDF_CS2__FEC_TX_ER 0x138 0x520 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS2__GPIO3_18 0x138 0x520 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS2__NANDF_CS2 0x138 0x520 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS2__PATA_CS_0 0x138 0x520 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS2__SD4_CLK 0x138 0x520 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS2__USBH3_H1_DP 0x138 0x520 0x000 0x7 0x0 +#define MX51_PAD_NANDF_CS3__FEC_MDC 0x13c 0x524 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS3__GPIO3_19 0x13c 0x524 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS3__NANDF_CS3 0x13c 0x524 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS3__PATA_CS_1 0x13c 0x524 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS3__SD4_DAT0 0x13c 0x524 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS3__USBH3_H1_DM 0x13c 0x524 0x000 0x7 0x0 +#define MX51_PAD_NANDF_CS4__FEC_TDATA1 0x140 0x528 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS4__GPIO3_20 0x140 0x528 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS4__NANDF_CS4 0x140 0x528 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS4__PATA_DA_0 0x140 0x528 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS4__SD4_DAT1 0x140 0x528 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS4__USBH3_STP 0x140 0x528 0xa24 0x7 0x0 +#define MX51_PAD_NANDF_CS5__FEC_TDATA2 0x144 0x52c 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS5__GPIO3_21 0x144 0x52c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS5__NANDF_CS5 0x144 0x52c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS5__PATA_DA_1 0x144 0x52c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS5__SD4_DAT2 0x144 0x52c 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS5__USBH3_DIR 0x144 0x52c 0xa1c 0x7 0x0 +#define MX51_PAD_NANDF_CS6__CSPI_SS3 0x148 0x530 0x928 0x7 0x0 +#define MX51_PAD_NANDF_CS6__FEC_TDATA3 0x148 0x530 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS6__GPIO3_22 0x148 0x530 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS6__NANDF_CS6 0x148 0x530 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS6__PATA_DA_2 0x148 0x530 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS6__SD4_DAT3 0x148 0x530 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS7__FEC_TX_EN 0x14c 0x534 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS7__GPIO3_23 0x14c 0x534 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS7__NANDF_CS7 0x14c 0x534 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS7__SD3_CLK 0x14c 0x534 0x000 0x5 0x0 +#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 0x150 0x538 0x000 0x2 0x0 +#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x150 0x538 0x974 0x1 0x0 +#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 0x150 0x538 0x000 0x3 0x0 +#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT 0x150 0x538 0x938 0x0 0x0 +#define MX51_PAD_NANDF_RDY_INT__SD3_CMD 0x150 0x538 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x154 0x53c 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D15__GPIO3_25 0x154 0x53c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D15__NANDF_D15 0x154 0x53c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D15__PATA_DATA15 0x154 0x53c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D15__SD3_DAT7 0x154 0x53c 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D14__ECSPI2_SS3 0x158 0x540 0x934 0x2 0x0 +#define MX51_PAD_NANDF_D14__GPIO3_26 0x158 0x540 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D14__NANDF_D14 0x158 0x540 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D14__PATA_DATA14 0x158 0x540 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D14__SD3_DAT6 0x158 0x540 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D13__ECSPI2_SS2 0x15c 0x544 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D13__GPIO3_27 0x15c 0x544 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D13__NANDF_D13 0x15c 0x544 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D13__PATA_DATA13 0x15c 0x544 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D13__SD3_DAT5 0x15c 0x544 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D12__ECSPI2_SS1 0x160 0x548 0x930 0x2 0x1 +#define MX51_PAD_NANDF_D12__GPIO3_28 0x160 0x548 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D12__NANDF_D12 0x160 0x548 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D12__PATA_DATA12 0x160 0x548 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D12__SD3_DAT4 0x160 0x548 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D11__FEC_RX_DV 0x164 0x54c 0x96c 0x2 0x0 +#define MX51_PAD_NANDF_D11__GPIO3_29 0x164 0x54c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D11__NANDF_D11 0x164 0x54c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D11__PATA_DATA11 0x164 0x54c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D11__SD3_DATA3 0x164 0x54c 0x948 0x5 0x1 +#define MX51_PAD_NANDF_D10__GPIO3_30 0x168 0x550 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D10__NANDF_D10 0x168 0x550 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D10__PATA_DATA10 0x168 0x550 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D10__SD3_DATA2 0x168 0x550 0x944 0x5 0x1 +#define MX51_PAD_NANDF_D9__FEC_RDATA0 0x16c 0x554 0x958 0x2 0x0 +#define MX51_PAD_NANDF_D9__GPIO3_31 0x16c 0x554 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D9__NANDF_D9 0x16c 0x554 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D9__PATA_DATA9 0x16c 0x554 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D9__SD3_DATA1 0x16c 0x554 0x940 0x5 0x1 +#define MX51_PAD_NANDF_D8__FEC_TDATA0 0x170 0x558 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D8__GPIO4_0 0x170 0x558 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D8__NANDF_D8 0x170 0x558 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D8__PATA_DATA8 0x170 0x558 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D8__SD3_DATA0 0x170 0x558 0x93c 0x5 0x1 +#define MX51_PAD_NANDF_D7__GPIO4_1 0x174 0x55c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D7__NANDF_D7 0x174 0x55c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D7__PATA_DATA7 0x174 0x55c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D7__USBH3_DATA0 0x174 0x55c 0x9fc 0x5 0x0 +#define MX51_PAD_NANDF_D6__GPIO4_2 0x178 0x560 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D6__NANDF_D6 0x178 0x560 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D6__PATA_DATA6 0x178 0x560 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D6__SD4_LCTL 0x178 0x560 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D6__USBH3_DATA1 0x178 0x560 0xa00 0x5 0x0 +#define MX51_PAD_NANDF_D5__GPIO4_3 0x17c 0x564 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D5__NANDF_D5 0x17c 0x564 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D5__PATA_DATA5 0x17c 0x564 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D5__SD4_WP 0x17c 0x564 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D5__USBH3_DATA2 0x17c 0x564 0xa04 0x5 0x0 +#define MX51_PAD_NANDF_D4__GPIO4_4 0x180 0x568 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D4__NANDF_D4 0x180 0x568 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D4__PATA_DATA4 0x180 0x568 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D4__SD4_CD 0x180 0x568 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D4__USBH3_DATA3 0x180 0x568 0xa08 0x5 0x0 +#define MX51_PAD_NANDF_D3__GPIO4_5 0x184 0x56c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D3__NANDF_D3 0x184 0x56c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D3__PATA_DATA3 0x184 0x56c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D3__SD4_DAT4 0x184 0x56c 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D3__USBH3_DATA4 0x184 0x56c 0xa0c 0x5 0x0 +#define MX51_PAD_NANDF_D2__GPIO4_6 0x188 0x570 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D2__NANDF_D2 0x188 0x570 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D2__PATA_DATA2 0x188 0x570 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D2__SD4_DAT5 0x188 0x570 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D2__USBH3_DATA5 0x188 0x570 0xa10 0x5 0x0 +#define MX51_PAD_NANDF_D1__GPIO4_7 0x18c 0x574 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D1__NANDF_D1 0x18c 0x574 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D1__PATA_DATA1 0x18c 0x574 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D1__SD4_DAT6 0x18c 0x574 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D1__USBH3_DATA6 0x18c 0x574 0xa14 0x5 0x0 +#define MX51_PAD_NANDF_D0__GPIO4_8 0x190 0x578 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D0__NANDF_D0 0x190 0x578 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D0__PATA_DATA0 0x190 0x578 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D0__SD4_DAT7 0x190 0x578 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D0__USBH3_DATA7 0x190 0x578 0xa18 0x5 0x0 +#define MX51_PAD_CSI1_D8__CSI1_D8 0x194 0x57c 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D8__GPIO3_12 0x194 0x57c 0x998 0x3 0x1 +#define MX51_PAD_CSI1_D9__CSI1_D9 0x198 0x580 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D9__GPIO3_13 0x198 0x580 0x000 0x3 0x0 +#define MX51_PAD_CSI1_D10__CSI1_D10 0x19c 0x584 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D11__CSI1_D11 0x1a0 0x588 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D12__CSI1_D12 0x1a4 0x58c 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D13__CSI1_D13 0x1a8 0x590 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D14__CSI1_D14 0x1ac 0x594 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D15__CSI1_D15 0x1b0 0x598 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D16__CSI1_D16 0x1b4 0x59c 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D17__CSI1_D17 0x1b8 0x5a0 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D18__CSI1_D18 0x1bc 0x5a4 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D19__CSI1_D19 0x1c0 0x5a8 0x000 0x0 0x0 +#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC 0x1c4 0x5ac 0x000 0x0 0x0 +#define MX51_PAD_CSI1_VSYNC__GPIO3_14 0x1c4 0x5ac 0x000 0x3 0x0 +#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC 0x1c8 0x5b0 0x000 0x0 0x0 +#define MX51_PAD_CSI1_HSYNC__GPIO3_15 0x1c8 0x5b0 0x000 0x3 0x0 +#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK 0x000 0x5b4 0x000 0x0 0x0 +#define MX51_PAD_CSI1_MCLK__CSI1_MCLK 0x000 0x5b8 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D12__CSI2_D12 0x1cc 0x5bc 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D12__GPIO4_9 0x1cc 0x5bc 0x000 0x3 0x0 +#define MX51_PAD_CSI2_D13__CSI2_D13 0x1d0 0x5c0 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D13__GPIO4_10 0x1d0 0x5c0 0x000 0x3 0x0 +#define MX51_PAD_CSI2_D14__CSI2_D14 0x1d4 0x5c4 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D15__CSI2_D15 0x1d8 0x5c8 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D16__CSI2_D16 0x1dc 0x5cc 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D17__CSI2_D17 0x1e0 0x5d0 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D18__CSI2_D18 0x1e4 0x5d4 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D18__GPIO4_11 0x1e4 0x5d4 0x000 0x3 0x0 +#define MX51_PAD_CSI2_D19__CSI2_D19 0x1e8 0x5d8 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D19__GPIO4_12 0x1e8 0x5d8 0x000 0x3 0x0 +#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC 0x1ec 0x5dc 0x000 0x0 0x0 +#define MX51_PAD_CSI2_VSYNC__GPIO4_13 0x1ec 0x5dc 0x000 0x3 0x0 +#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC 0x1f0 0x5e0 0x000 0x0 0x0 +#define MX51_PAD_CSI2_HSYNC__GPIO4_14 0x1f0 0x5e0 0x000 0x3 0x0 +#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK 0x1f4 0x5e4 0x000 0x0 0x0 +#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x1f4 0x5e4 0x000 0x3 0x0 +#define MX51_PAD_I2C1_CLK__GPIO4_16 0x1f8 0x5e8 0x000 0x3 0x0 +#define MX51_PAD_I2C1_CLK__I2C1_CLK 0x1f8 0x5e8 0x000 0x0 0x0 +#define MX51_PAD_I2C1_DAT__GPIO4_17 0x1fc 0x5ec 0x000 0x3 0x0 +#define MX51_PAD_I2C1_DAT__I2C1_DAT 0x1fc 0x5ec 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x200 0x5f0 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 0x200 0x5f0 0x000 0x3 0x0 +#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x204 0x5f4 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 0x204 0x5f4 0x000 0x3 0x0 +#define MX51_PAD_AUD3_BB_RXD__UART3_RXD 0x204 0x5f4 0x9f4 0x1 0x2 +#define MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x208 0x5f8 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_CK__GPIO4_20 0x208 0x5f8 0x000 0x3 0x0 +#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x20c 0x5fc 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_FS__GPIO4_21 0x20c 0x5fc 0x000 0x3 0x0 +#define MX51_PAD_AUD3_BB_FS__UART3_TXD 0x20c 0x5fc 0x000 0x1 0x0 +#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x210 0x600 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_MOSI__GPIO4_22 0x210 0x600 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_MOSI__I2C1_SDA 0x210 0x600 0x9b4 0x1 0x1 +#define MX51_PAD_CSPI1_MISO__AUD4_RXD 0x214 0x604 0x8c4 0x1 0x1 +#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x214 0x604 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_MISO__GPIO4_23 0x214 0x604 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_SS0__AUD4_TXC 0x218 0x608 0x8cc 0x1 0x1 +#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 0x218 0x608 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_SS0__GPIO4_24 0x218 0x608 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_SS1__AUD4_TXD 0x21c 0x60c 0x8c8 0x1 0x1 +#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 0x21c 0x60c 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_SS1__GPIO4_25 0x21c 0x60c 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_RDY__AUD4_TXFS 0x220 0x610 0x8d0 0x1 0x1 +#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY 0x220 0x610 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_RDY__GPIO4_26 0x220 0x610 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x224 0x614 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_SCLK__GPIO4_27 0x224 0x614 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_SCLK__I2C1_SCL 0x224 0x614 0x9b0 0x1 0x1 +#define MX51_PAD_UART1_RXD__GPIO4_28 0x228 0x618 0x000 0x3 0x0 +#define MX51_PAD_UART1_RXD__UART1_RXD 0x228 0x618 0x9e4 0x0 0x0 +#define MX51_PAD_UART1_TXD__GPIO4_29 0x22c 0x61c 0x000 0x3 0x0 +#define MX51_PAD_UART1_TXD__PWM2_PWMO 0x22c 0x61c 0x000 0x1 0x0 +#define MX51_PAD_UART1_TXD__UART1_TXD 0x22c 0x61c 0x000 0x0 0x0 +#define MX51_PAD_UART1_RTS__GPIO4_30 0x230 0x620 0x000 0x3 0x0 +#define MX51_PAD_UART1_RTS__UART1_RTS 0x230 0x620 0x9e0 0x0 0x0 +#define MX51_PAD_UART1_CTS__GPIO4_31 0x234 0x624 0x000 0x3 0x0 +#define MX51_PAD_UART1_CTS__UART1_CTS 0x234 0x624 0x000 0x0 0x0 +#define MX51_PAD_UART2_RXD__FIRI_TXD 0x238 0x628 0x000 0x1 0x0 +#define MX51_PAD_UART2_RXD__GPIO1_20 0x238 0x628 0x000 0x3 0x0 +#define MX51_PAD_UART2_RXD__UART2_RXD 0x238 0x628 0x9ec 0x0 0x2 +#define MX51_PAD_UART2_TXD__FIRI_RXD 0x23c 0x62c 0x000 0x1 0x0 +#define MX51_PAD_UART2_TXD__GPIO1_21 0x23c 0x62c 0x000 0x3 0x0 +#define MX51_PAD_UART2_TXD__UART2_TXD 0x23c 0x62c 0x000 0x0 0x0 +#define MX51_PAD_UART3_RXD__CSI1_D0 0x240 0x630 0x000 0x2 0x0 +#define MX51_PAD_UART3_RXD__GPIO1_22 0x240 0x630 0x000 0x3 0x0 +#define MX51_PAD_UART3_RXD__UART1_DTR 0x240 0x630 0x000 0x0 0x0 +#define MX51_PAD_UART3_RXD__UART3_RXD 0x240 0x630 0x9f4 0x1 0x4 +#define MX51_PAD_UART3_TXD__CSI1_D1 0x244 0x634 0x000 0x2 0x0 +#define MX51_PAD_UART3_TXD__GPIO1_23 0x244 0x634 0x000 0x3 0x0 +#define MX51_PAD_UART3_TXD__UART1_DSR 0x244 0x634 0x000 0x0 0x0 +#define MX51_PAD_UART3_TXD__UART3_TXD 0x244 0x634 0x000 0x1 0x0 +#define MX51_PAD_OWIRE_LINE__GPIO1_24 0x248 0x638 0x000 0x3 0x0 +#define MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x248 0x638 0x000 0x0 0x0 +#define MX51_PAD_OWIRE_LINE__SPDIF_OUT 0x248 0x638 0x000 0x6 0x0 +#define MX51_PAD_KEY_ROW0__KEY_ROW0 0x24c 0x63c 0x000 0x0 0x0 +#define MX51_PAD_KEY_ROW1__KEY_ROW1 0x250 0x640 0x000 0x0 0x0 +#define MX51_PAD_KEY_ROW2__KEY_ROW2 0x254 0x644 0x000 0x0 0x0 +#define MX51_PAD_KEY_ROW3__KEY_ROW3 0x258 0x648 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL0__KEY_COL0 0x25c 0x64c 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL0__PLL1_BYP 0x25c 0x64c 0x90c 0x7 0x0 +#define MX51_PAD_KEY_COL1__KEY_COL1 0x260 0x650 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL1__PLL2_BYP 0x260 0x650 0x910 0x7 0x0 +#define MX51_PAD_KEY_COL2__KEY_COL2 0x264 0x654 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL2__PLL3_BYP 0x264 0x654 0x000 0x7 0x0 +#define MX51_PAD_KEY_COL3__KEY_COL3 0x268 0x658 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL4__I2C2_SCL 0x26c 0x65c 0x9b8 0x3 0x1 +#define MX51_PAD_KEY_COL4__KEY_COL4 0x26c 0x65c 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL4__SPDIF_OUT1 0x26c 0x65c 0x000 0x6 0x0 +#define MX51_PAD_KEY_COL4__UART1_RI 0x26c 0x65c 0x000 0x1 0x0 +#define MX51_PAD_KEY_COL4__UART3_RTS 0x26c 0x65c 0x9f0 0x2 0x4 +#define MX51_PAD_KEY_COL5__I2C2_SDA 0x270 0x660 0x9bc 0x3 0x1 +#define MX51_PAD_KEY_COL5__KEY_COL5 0x270 0x660 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL5__UART1_DCD 0x270 0x660 0x000 0x1 0x0 +#define MX51_PAD_KEY_COL5__UART3_CTS 0x270 0x660 0x000 0x2 0x0 +#define MX51_PAD_USBH1_CLK__CSPI_SCLK 0x278 0x678 0x914 0x1 0x1 +#define MX51_PAD_USBH1_CLK__GPIO1_25 0x278 0x678 0x000 0x2 0x0 +#define MX51_PAD_USBH1_CLK__I2C2_SCL 0x278 0x678 0x9b8 0x5 0x2 +#define MX51_PAD_USBH1_CLK__USBH1_CLK 0x278 0x678 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DIR__CSPI_MOSI 0x27c 0x67c 0x91c 0x1 0x1 +#define MX51_PAD_USBH1_DIR__GPIO1_26 0x27c 0x67c 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DIR__I2C2_SDA 0x27c 0x67c 0x9bc 0x5 0x2 +#define MX51_PAD_USBH1_DIR__USBH1_DIR 0x27c 0x67c 0x000 0x0 0x0 +#define MX51_PAD_USBH1_STP__CSPI_RDY 0x280 0x680 0x000 0x1 0x0 +#define MX51_PAD_USBH1_STP__GPIO1_27 0x280 0x680 0x000 0x2 0x0 +#define MX51_PAD_USBH1_STP__UART3_RXD 0x280 0x680 0x9f4 0x5 0x6 +#define MX51_PAD_USBH1_STP__USBH1_STP 0x280 0x680 0x000 0x0 0x0 +#define MX51_PAD_USBH1_NXT__CSPI_MISO 0x284 0x684 0x918 0x1 0x0 +#define MX51_PAD_USBH1_NXT__GPIO1_28 0x284 0x684 0x000 0x2 0x0 +#define MX51_PAD_USBH1_NXT__UART3_TXD 0x284 0x684 0x000 0x5 0x0 +#define MX51_PAD_USBH1_NXT__USBH1_NXT 0x284 0x684 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA0__GPIO1_11 0x288 0x688 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA0__UART2_CTS 0x288 0x688 0x000 0x1 0x0 +#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x288 0x688 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA1__GPIO1_12 0x28c 0x68c 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA1__UART2_RXD 0x28c 0x68c 0x9ec 0x1 0x4 +#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x28c 0x68c 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA2__GPIO1_13 0x290 0x690 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA2__UART2_TXD 0x290 0x690 0x000 0x1 0x0 +#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x290 0x690 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA3__GPIO1_14 0x294 0x694 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA3__UART2_RTS 0x294 0x694 0x9e8 0x1 0x5 +#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x294 0x694 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA4__CSPI_SS0 0x298 0x698 0x000 0x1 0x0 +#define MX51_PAD_USBH1_DATA4__GPIO1_15 0x298 0x698 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x298 0x698 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA5__CSPI_SS1 0x29c 0x69c 0x920 0x1 0x0 +#define MX51_PAD_USBH1_DATA5__GPIO1_16 0x29c 0x69c 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x29c 0x69c 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA6__CSPI_SS3 0x2a0 0x6a0 0x928 0x1 0x1 +#define MX51_PAD_USBH1_DATA6__GPIO1_17 0x2a0 0x6a0 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x2a0 0x6a0 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 0x2a4 0x6a4 0x000 0x1 0x0 +#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 0x2a4 0x6a4 0x934 0x5 0x1 +#define MX51_PAD_USBH1_DATA7__GPIO1_18 0x2a4 0x6a4 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x2a4 0x6a4 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN11__DI1_PIN11 0x2a8 0x6a8 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 0x2a8 0x6a8 0x000 0x7 0x0 +#define MX51_PAD_DI1_PIN11__GPIO3_0 0x2a8 0x6a8 0x000 0x4 0x0 +#define MX51_PAD_DI1_PIN12__DI1_PIN12 0x2ac 0x6ac 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN12__GPIO3_1 0x2ac 0x6ac 0x978 0x4 0x1 +#define MX51_PAD_DI1_PIN13__DI1_PIN13 0x2b0 0x6b0 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN13__GPIO3_2 0x2b0 0x6b0 0x97c 0x4 0x1 +#define MX51_PAD_DI1_D0_CS__DI1_D0_CS 0x2b4 0x6b4 0x000 0x0 0x0 +#define MX51_PAD_DI1_D0_CS__GPIO3_3 0x2b4 0x6b4 0x980 0x4 0x1 +#define MX51_PAD_DI1_D1_CS__DI1_D1_CS 0x2b8 0x6b8 0x000 0x0 0x0 +#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 0x2b8 0x6b8 0x000 0x2 0x0 +#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 0x2b8 0x6b8 0x000 0x3 0x0 +#define MX51_PAD_DI1_D1_CS__GPIO3_4 0x2b8 0x6b8 0x984 0x4 0x1 +#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 0x2bc 0x6bc 0x9a4 0x2 0x1 +#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN 0x2bc 0x6bc 0x9c4 0x0 0x0 +#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 0x2bc 0x6bc 0x988 0x4 0x1 +#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 0x2c0 0x6c0 0x000 0x3 0x0 +#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO 0x2c0 0x6c0 0x9c4 0x0 0x1 +#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 0x2c0 0x6c0 0x98c 0x4 0x1 +#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 0x2c4 0x6c4 0x000 0x2 0x0 +#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 0x2c4 0x6c4 0x000 0x3 0x0 +#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK 0x2c4 0x6c4 0x000 0x0 0x0 +#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 0x2c4 0x6c4 0x990 0x4 0x1 +#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK 0x2c8 0x6c8 0x000 0x2 0x0 +#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 0x2c8 0x6c8 0x000 0x2 0x0 +#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 0x2c8 0x6c8 0x000 0x3 0x0 +#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS 0x2c8 0x6c8 0x000 0x0 0x0 +#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 0x2c8 0x6c8 0x994 0x4 0x1 +#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x2cc 0x6cc 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x2d0 0x6d0 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x2d4 0x6d4 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x2d8 0x6d8 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x2dc 0x6dc 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x2e0 0x6e0 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC 0x2e4 0x6e4 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x2e4 0x6e4 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG 0x2e8 0x6e8 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x2e8 0x6e8 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 0x2ec 0x6ec 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x2ec 0x6ec 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 0x2f0 0x6f0 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x2f0 0x6f0 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE 0x2f4 0x6f4 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x2f4 0x6f4 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 0x2f8 0x6f8 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x2f8 0x6f8 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL 0x2fc 0x6fc 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x2fc 0x6fc 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 0x300 0x700 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x300 0x700 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 0x304 0x704 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x304 0x704 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH 0x308 0x708 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x308 0x708 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 0x30c 0x70c 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x30c 0x70c 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 0x310 0x710 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x310 0x710 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 0x314 0x714 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x314 0x714 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 0x314 0x714 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 0x314 0x714 0x000 0x4 0x0 +#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 0x318 0x718 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x318 0x718 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 0x318 0x718 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 0x318 0x718 0x000 0x4 0x0 +#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 0x31c 0x71c 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x31c 0x71c 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 0x31c 0x71c 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 0x31c 0x71c 0x000 0x4 0x0 +#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 0x320 0x720 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x320 0x720 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 0x320 0x720 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 0x320 0x720 0x000 0x4 0x0 +#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 0x324 0x724 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x324 0x724 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS 0x324 0x724 0x000 0x6 0x0 +#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 0x324 0x724 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 0x328 0x728 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x328 0x728 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS 0x328 0x728 0x000 0x6 0x0 +#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 0x328 0x728 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS 0x328 0x728 0x000 0x4 0x0 +#define MX51_PAD_DI1_PIN3__DI1_PIN3 0x32c 0x72c 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN2__DI1_PIN2 0x330 0x734 0x000 0x0 0x0 +#define MX51_PAD_DI_GP2__DISP1_SER_CLK 0x338 0x740 0x000 0x0 0x0 +#define MX51_PAD_DI_GP2__DISP2_WAIT 0x338 0x740 0x9a8 0x2 0x1 +#define MX51_PAD_DI_GP3__CSI1_DATA_EN 0x33c 0x744 0x9a0 0x3 0x1 +#define MX51_PAD_DI_GP3__DISP1_SER_DIO 0x33c 0x744 0x9c0 0x0 0x0 +#define MX51_PAD_DI_GP3__FEC_TX_ER 0x33c 0x744 0x000 0x2 0x0 +#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN 0x340 0x748 0x99c 0x3 0x1 +#define MX51_PAD_DI2_PIN4__DI2_PIN4 0x340 0x748 0x000 0x0 0x0 +#define MX51_PAD_DI2_PIN4__FEC_CRS 0x340 0x748 0x950 0x2 0x1 +#define MX51_PAD_DI2_PIN2__DI2_PIN2 0x344 0x74c 0x000 0x0 0x0 +#define MX51_PAD_DI2_PIN2__FEC_MDC 0x344 0x74c 0x000 0x2 0x0 +#define MX51_PAD_DI2_PIN3__DI2_PIN3 0x348 0x750 0x000 0x0 0x0 +#define MX51_PAD_DI2_PIN3__FEC_MDIO 0x348 0x750 0x954 0x2 0x1 +#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x34c 0x754 0x000 0x0 0x0 +#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x34c 0x754 0x95c 0x2 0x1 +#define MX51_PAD_DI_GP4__DI2_PIN15 0x350 0x758 0x000 0x4 0x0 +#define MX51_PAD_DI_GP4__DISP1_SER_DIN 0x350 0x758 0x9c0 0x0 0x1 +#define MX51_PAD_DI_GP4__DISP2_PIN1 0x350 0x758 0x000 0x3 0x0 +#define MX51_PAD_DI_GP4__FEC_RDATA2 0x350 0x758 0x960 0x2 0x1 +#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x354 0x75c 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x354 0x75c 0x964 0x2 0x1 +#define MX51_PAD_DISP2_DAT0__KEY_COL6 0x354 0x75c 0x9c8 0x4 0x1 +#define MX51_PAD_DISP2_DAT0__UART3_RXD 0x354 0x75c 0x9f4 0x5 0x8 +#define MX51_PAD_DISP2_DAT0__USBH3_CLK 0x354 0x75c 0x9f8 0x3 0x1 +#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x358 0x760 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x358 0x760 0x970 0x2 0x1 +#define MX51_PAD_DISP2_DAT1__KEY_COL7 0x358 0x760 0x9cc 0x4 0x1 +#define MX51_PAD_DISP2_DAT1__UART3_TXD 0x358 0x760 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT1__USBH3_DIR 0x358 0x760 0xa1c 0x3 0x1 +#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x35c 0x764 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x360 0x768 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x364 0x76c 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x368 0x770 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x36c 0x774 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x36c 0x774 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT6__GPIO1_19 0x36c 0x774 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT6__KEY_ROW4 0x36c 0x774 0x9d0 0x4 0x1 +#define MX51_PAD_DISP2_DAT6__USBH3_STP 0x36c 0x774 0xa24 0x3 0x1 +#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x370 0x778 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x370 0x778 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT7__GPIO1_29 0x370 0x778 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT7__KEY_ROW5 0x370 0x778 0x9d4 0x4 0x1 +#define MX51_PAD_DISP2_DAT7__USBH3_NXT 0x370 0x778 0xa20 0x3 0x1 +#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x374 0x77c 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x374 0x77c 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT8__GPIO1_30 0x374 0x77c 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT8__KEY_ROW6 0x374 0x77c 0x9d8 0x4 0x1 +#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 0x374 0x77c 0x9fc 0x3 0x1 +#define MX51_PAD_DISP2_DAT9__AUD6_RXC 0x378 0x780 0x8f4 0x4 0x1 +#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x378 0x780 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x378 0x780 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT9__GPIO1_31 0x378 0x780 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 0x378 0x780 0xa00 0x3 0x1 +#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x37c 0x784 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS 0x37c 0x784 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT10__FEC_COL 0x37c 0x784 0x94c 0x2 0x1 +#define MX51_PAD_DISP2_DAT10__KEY_ROW7 0x37c 0x784 0x9dc 0x4 0x1 +#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 0x37c 0x784 0xa04 0x3 0x1 +#define MX51_PAD_DISP2_DAT11__AUD6_TXD 0x380 0x788 0x8f0 0x4 0x1 +#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x380 0x788 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x380 0x788 0x968 0x2 0x1 +#define MX51_PAD_DISP2_DAT11__GPIO1_10 0x380 0x788 0x000 0x7 0x0 +#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 0x380 0x788 0xa08 0x3 0x1 +#define MX51_PAD_DISP2_DAT12__AUD6_RXD 0x384 0x78c 0x8ec 0x4 0x1 +#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x384 0x78c 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x384 0x78c 0x96c 0x2 0x1 +#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 0x384 0x78c 0xa0c 0x3 0x1 +#define MX51_PAD_DISP2_DAT13__AUD6_TXC 0x388 0x790 0x8fc 0x4 0x1 +#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x388 0x790 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x388 0x790 0x974 0x2 0x1 +#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 0x388 0x790 0xa10 0x3 0x1 +#define MX51_PAD_DISP2_DAT14__AUD6_TXFS 0x38c 0x794 0x900 0x4 0x1 +#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x38c 0x794 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x38c 0x794 0x958 0x2 0x1 +#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 0x38c 0x794 0xa14 0x3 0x1 +#define MX51_PAD_DISP2_DAT15__AUD6_RXFS 0x390 0x798 0x8f8 0x4 0x1 +#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS 0x390 0x798 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x390 0x798 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x390 0x798 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 0x390 0x798 0xa18 0x3 0x1 +#define MX51_PAD_SD1_CMD__AUD5_RXFS 0x394 0x79c 0x8e0 0x1 0x1 +#define MX51_PAD_SD1_CMD__CSPI_MOSI 0x394 0x79c 0x91c 0x2 0x2 +#define MX51_PAD_SD1_CMD__SD1_CMD 0x394 0x79c 0x000 0x0 0x0 +#define MX51_PAD_SD1_CLK__AUD5_RXC 0x398 0x7a0 0x8dc 0x1 0x1 +#define MX51_PAD_SD1_CLK__CSPI_SCLK 0x398 0x7a0 0x914 0x2 0x2 +#define MX51_PAD_SD1_CLK__SD1_CLK 0x398 0x7a0 0x000 0x0 0x0 +#define MX51_PAD_SD1_DATA0__AUD5_TXD 0x39c 0x7a4 0x8d8 0x1 0x2 +#define MX51_PAD_SD1_DATA0__CSPI_MISO 0x39c 0x7a4 0x918 0x2 0x1 +#define MX51_PAD_SD1_DATA0__SD1_DATA0 0x39c 0x7a4 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA0__EIM_DA0 0x01c 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA1__EIM_DA1 0x020 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA2__EIM_DA2 0x024 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA3__EIM_DA3 0x028 0x000 0x000 0x0 0x0 +#define MX51_PAD_SD1_DATA1__AUD5_RXD 0x3a0 0x7a8 0x8d4 0x1 0x2 +#define MX51_PAD_SD1_DATA1__SD1_DATA1 0x3a0 0x7a8 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA4__EIM_DA4 0x02c 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA5__EIM_DA5 0x030 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA6__EIM_DA6 0x034 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA7__EIM_DA7 0x038 0x000 0x000 0x0 0x0 +#define MX51_PAD_SD1_DATA2__AUD5_TXC 0x3a4 0x7ac 0x8e4 0x1 0x2 +#define MX51_PAD_SD1_DATA2__SD1_DATA2 0x3a4 0x7ac 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA10__EIM_DA10 0x044 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA11__EIM_DA11 0x048 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA8__EIM_DA8 0x03c 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA9__EIM_DA9 0x040 0x000 0x000 0x0 0x0 +#define MX51_PAD_SD1_DATA3__AUD5_TXFS 0x3a8 0x7b0 0x8e8 0x1 0x2 +#define MX51_PAD_SD1_DATA3__CSPI_SS1 0x3a8 0x7b0 0x920 0x2 0x1 +#define MX51_PAD_SD1_DATA3__SD1_DATA3 0x3a8 0x7b0 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_0__CSPI_SS2 0x3ac 0x7b4 0x924 0x2 0x0 +#define MX51_PAD_GPIO1_0__GPIO1_0 0x3ac 0x7b4 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_0__SD1_CD 0x3ac 0x7b4 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_1__CSPI_MISO 0x3b0 0x7b8 0x918 0x2 0x2 +#define MX51_PAD_GPIO1_1__GPIO1_1 0x3b0 0x7b8 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_1__SD1_WP 0x3b0 0x7b8 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA12__EIM_DA12 0x04c 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA13__EIM_DA13 0x050 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA14__EIM_DA14 0x054 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA15__EIM_DA15 0x058 0x000 0x000 0x0 0x0 +#define MX51_PAD_SD2_CMD__CSPI_MOSI 0x3b4 0x7bc 0x91c 0x2 0x3 +#define MX51_PAD_SD2_CMD__I2C1_SCL 0x3b4 0x7bc 0x9b0 0x1 0x2 +#define MX51_PAD_SD2_CMD__SD2_CMD 0x3b4 0x7bc 0x000 0x0 0x0 +#define MX51_PAD_SD2_CLK__CSPI_SCLK 0x3b8 0x7c0 0x914 0x2 0x3 +#define MX51_PAD_SD2_CLK__I2C1_SDA 0x3b8 0x7c0 0x9b4 0x1 0x2 +#define MX51_PAD_SD2_CLK__SD2_CLK 0x3b8 0x7c0 0x000 0x0 0x0 +#define MX51_PAD_SD2_DATA0__CSPI_MISO 0x3bc 0x7c4 0x918 0x2 0x3 +#define MX51_PAD_SD2_DATA0__SD1_DAT4 0x3bc 0x7c4 0x000 0x1 0x0 +#define MX51_PAD_SD2_DATA0__SD2_DATA0 0x3bc 0x7c4 0x000 0x0 0x0 +#define MX51_PAD_SD2_DATA1__SD1_DAT5 0x3c0 0x7c8 0x000 0x1 0x0 +#define MX51_PAD_SD2_DATA1__SD2_DATA1 0x3c0 0x7c8 0x000 0x0 0x0 +#define MX51_PAD_SD2_DATA1__USBH3_H2_DP 0x3c0 0x7c8 0x000 0x2 0x0 +#define MX51_PAD_SD2_DATA2__SD1_DAT6 0x3c4 0x7cc 0x000 0x1 0x0 +#define MX51_PAD_SD2_DATA2__SD2_DATA2 0x3c4 0x7cc 0x000 0x0 0x0 +#define MX51_PAD_SD2_DATA2__USBH3_H2_DM 0x3c4 0x7cc 0x000 0x2 0x0 +#define MX51_PAD_SD2_DATA3__CSPI_SS2 0x3c8 0x7d0 0x924 0x2 0x1 +#define MX51_PAD_SD2_DATA3__SD1_DAT7 0x3c8 0x7d0 0x000 0x1 0x0 +#define MX51_PAD_SD2_DATA3__SD2_DATA3 0x3c8 0x7d0 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_2__CCM_OUT_2 0x3cc 0x7d4 0x000 0x5 0x0 +#define MX51_PAD_GPIO1_2__GPIO1_2 0x3cc 0x7d4 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_2__I2C2_SCL 0x3cc 0x7d4 0x9b8 0x2 0x3 +#define MX51_PAD_GPIO1_2__PLL1_BYP 0x3cc 0x7d4 0x90c 0x7 0x1 +#define MX51_PAD_GPIO1_2__PWM1_PWMO 0x3cc 0x7d4 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_3__GPIO1_3 0x3d0 0x7d8 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_3__I2C2_SDA 0x3d0 0x7d8 0x9bc 0x2 0x3 +#define MX51_PAD_GPIO1_3__PLL2_BYP 0x3d0 0x7d8 0x910 0x7 0x1 +#define MX51_PAD_GPIO1_3__PWM2_PWMO 0x3d0 0x7d8 0x000 0x1 0x0 +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ 0x3d4 0x7fc 0x000 0x0 0x0 +#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B 0x3d4 0x7fc 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK 0x3d8 0x804 0x908 0x4 0x1 +#define MX51_PAD_GPIO1_4__EIM_RDY 0x3d8 0x804 0x938 0x3 0x1 +#define MX51_PAD_GPIO1_4__GPIO1_4 0x3d8 0x804 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B 0x3d8 0x804 0x000 0x2 0x0 +#define MX51_PAD_GPIO1_5__CSI2_MCLK 0x3dc 0x808 0x000 0x6 0x0 +#define MX51_PAD_GPIO1_5__DISP2_PIN16 0x3dc 0x808 0x000 0x3 0x0 +#define MX51_PAD_GPIO1_5__GPIO1_5 0x3dc 0x808 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B 0x3dc 0x808 0x000 0x2 0x0 +#define MX51_PAD_GPIO1_6__DISP2_PIN17 0x3e0 0x80c 0x000 0x4 0x0 +#define MX51_PAD_GPIO1_6__GPIO1_6 0x3e0 0x80c 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_6__REF_EN_B 0x3e0 0x80c 0x000 0x3 0x0 +#define MX51_PAD_GPIO1_7__CCM_OUT_0 0x3e4 0x810 0x000 0x3 0x0 +#define MX51_PAD_GPIO1_7__GPIO1_7 0x3e4 0x810 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_7__SD2_WP 0x3e4 0x810 0x000 0x6 0x0 +#define MX51_PAD_GPIO1_7__SPDIF_OUT1 0x3e4 0x810 0x000 0x2 0x0 +#define MX51_PAD_GPIO1_8__CSI2_DATA_EN 0x3e8 0x814 0x99c 0x2 0x2 +#define MX51_PAD_GPIO1_8__GPIO1_8 0x3e8 0x814 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_8__SD2_CD 0x3e8 0x814 0x000 0x6 0x0 +#define MX51_PAD_GPIO1_8__USBH3_PWR 0x3e8 0x814 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_9__CCM_OUT_1 0x3ec 0x818 0x000 0x3 0x0 +#define MX51_PAD_GPIO1_9__DISP2_D1_CS 0x3ec 0x818 0x000 0x2 0x0 +#define MX51_PAD_GPIO1_9__DISP2_SER_CS 0x3ec 0x818 0x000 0x7 0x0 +#define MX51_PAD_GPIO1_9__GPIO1_9 0x3ec 0x818 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_9__SD2_LCTL 0x3ec 0x818 0x000 0x6 0x0 +#define MX51_PAD_GPIO1_9__USBH3_OC 0x3ec 0x818 0x000 0x1 0x0 + +#endif /* __DTS_IMX51_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index fcf035bf7c5a..21bb786c5b31 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -10,7 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "imx51-pinfunc.h" / { aliases { @@ -55,6 +56,24 @@ }; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks 24>; + clock-names = "cpu"; + operating-points = < + /* kHz uV (No regulator support) */ + 160000 0 + 800000 0 + >; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -67,6 +86,9 @@ compatible = "fsl,imx51-ipu"; reg = <0x40000000 0x20000000>; interrupts = <11 10>; + clocks = <&clks 59>, <&clks 110>, <&clks 61>; + clock-names = "bus", "di0", "di1"; + resets = <&src 2>; }; aips@70000000 { /* AIPS1 */ @@ -244,6 +266,14 @@ status = "disabled"; }; + gpt: timer@73fa0000 { + compatible = "fsl,imx51-gpt", "fsl,imx31-gpt"; + reg = <0x73fa0000 0x4000>; + interrupts = <39>; + clocks = <&clks 36>, <&clks 41>; + clock-names = "ipg", "per"; + }; + iomuxc: iomuxc@73fa8000 { compatible = "fsl,imx51-iomuxc"; reg = <0x73fa8000 0x4000>; @@ -251,10 +281,10 @@ audmux { pinctrl_audmux_1: audmuxgrp-1 { fsl,pins = < - 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */ - 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */ - 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */ - 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */ + MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 + MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 + MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 + MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 >; }; }; @@ -262,46 +292,46 @@ fec { pinctrl_fec_1: fecgrp-1 { fsl,pins = < - 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */ - 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */ - 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */ - 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */ - 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */ - 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */ - 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */ - 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */ - 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */ - 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */ - 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */ - 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */ - 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */ - 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */ - 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */ - 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */ - 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */ + MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 + MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 + MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 + MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 + MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 >; }; pinctrl_fec_2: fecgrp-2 { fsl,pins = < - 589 0x80000000 /* MX51_PAD_DI_GP3__FEC_TX_ER */ - 592 0x80000000 /* MX51_PAD_DI2_PIN4__FEC_CRS */ - 594 0x80000000 /* MX51_PAD_DI2_PIN2__FEC_MDC */ - 596 0x80000000 /* MX51_PAD_DI2_PIN3__FEC_MDIO */ - 598 0x80000000 /* MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 */ - 602 0x80000000 /* MX51_PAD_DI_GP4__FEC_RDATA2 */ - 604 0x80000000 /* MX51_PAD_DISP2_DAT0__FEC_RDATA3 */ - 609 0x80000000 /* MX51_PAD_DISP2_DAT1__FEC_RX_ER */ - 618 0x80000000 /* MX51_PAD_DISP2_DAT6__FEC_TDATA1 */ - 623 0x80000000 /* MX51_PAD_DISP2_DAT7__FEC_TDATA2 */ - 628 0x80000000 /* MX51_PAD_DISP2_DAT8__FEC_TDATA3 */ - 634 0x80000000 /* MX51_PAD_DISP2_DAT9__FEC_TX_EN */ - 639 0x80000000 /* MX51_PAD_DISP2_DAT10__FEC_COL */ - 644 0x80000000 /* MX51_PAD_DISP2_DAT11__FEC_RX_CLK */ - 649 0x80000000 /* MX51_PAD_DISP2_DAT12__FEC_RX_DV */ - 653 0x80000000 /* MX51_PAD_DISP2_DAT13__FEC_TX_CLK */ - 657 0x80000000 /* MX51_PAD_DISP2_DAT14__FEC_RDATA0 */ - 662 0x80000000 /* MX51_PAD_DISP2_DAT15__FEC_TDATA0 */ + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 >; }; }; @@ -309,9 +339,19 @@ ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { fsl,pins = < - 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */ - 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */ - 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */ + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + >; + }; + }; + + ecspi2 { + pinctrl_ecspi2_1: ecspi2grp-1 { + fsl,pins = < + MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185 + MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185 + MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185 >; }; }; @@ -319,12 +359,12 @@ esdhc1 { pinctrl_esdhc1_1: esdhc1grp-1 { fsl,pins = < - 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */ - 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */ - 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */ - 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */ - 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */ - 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */ + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 >; }; }; @@ -332,12 +372,12 @@ esdhc2 { pinctrl_esdhc2_1: esdhc2grp-1 { fsl,pins = < - 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */ - 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */ - 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */ - 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */ - 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */ - 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */ + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 >; }; }; @@ -345,8 +385,15 @@ i2c2 { pinctrl_i2c2_1: i2c2grp-1 { fsl,pins = < - 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */ - 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */ + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_i2c2_2: i2c2grp-2 { + fsl,pins = < + MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed + MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed >; }; }; @@ -354,32 +401,32 @@ ipu_disp1 { pinctrl_ipu_disp1_1: ipudisp1grp-1 { fsl,pins = < - 528 0x5 /* MX51_PAD_DISP1_DAT0__DISP1_DAT0 */ - 529 0x5 /* MX51_PAD_DISP1_DAT1__DISP1_DAT1 */ - 530 0x5 /* MX51_PAD_DISP1_DAT2__DISP1_DAT2 */ - 531 0x5 /* MX51_PAD_DISP1_DAT3__DISP1_DAT3 */ - 532 0x5 /* MX51_PAD_DISP1_DAT4__DISP1_DAT4 */ - 533 0x5 /* MX51_PAD_DISP1_DAT5__DISP1_DAT5 */ - 535 0x5 /* MX51_PAD_DISP1_DAT6__DISP1_DAT6 */ - 537 0x5 /* MX51_PAD_DISP1_DAT7__DISP1_DAT7 */ - 539 0x5 /* MX51_PAD_DISP1_DAT8__DISP1_DAT8 */ - 541 0x5 /* MX51_PAD_DISP1_DAT9__DISP1_DAT9 */ - 543 0x5 /* MX51_PAD_DISP1_DAT10__DISP1_DAT10 */ - 545 0x5 /* MX51_PAD_DISP1_DAT11__DISP1_DAT11 */ - 547 0x5 /* MX51_PAD_DISP1_DAT12__DISP1_DAT12 */ - 549 0x5 /* MX51_PAD_DISP1_DAT13__DISP1_DAT13 */ - 551 0x5 /* MX51_PAD_DISP1_DAT14__DISP1_DAT14 */ - 553 0x5 /* MX51_PAD_DISP1_DAT15__DISP1_DAT15 */ - 555 0x5 /* MX51_PAD_DISP1_DAT16__DISP1_DAT16 */ - 557 0x5 /* MX51_PAD_DISP1_DAT17__DISP1_DAT17 */ - 559 0x5 /* MX51_PAD_DISP1_DAT18__DISP1_DAT18 */ - 563 0x5 /* MX51_PAD_DISP1_DAT19__DISP1_DAT19 */ - 567 0x5 /* MX51_PAD_DISP1_DAT20__DISP1_DAT20 */ - 571 0x5 /* MX51_PAD_DISP1_DAT21__DISP1_DAT21 */ - 575 0x5 /* MX51_PAD_DISP1_DAT22__DISP1_DAT22 */ - 579 0x5 /* MX51_PAD_DISP1_DAT23__DISP1_DAT23 */ - 584 0x5 /* MX51_PAD_DI1_PIN2__DI1_PIN2 (hsync) */ - 583 0x5 /* MX51_PAD_DI1_PIN3__DI1_PIN3 (vsync) */ + MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 + MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 + MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 + MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 + MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 + MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 + MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 + MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 + MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 + MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 + MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 + MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 + MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 + MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 + MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 + MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 + MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 + MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 + MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 + MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 + MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 + MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 + MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 + MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 + MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 /* hsync */ + MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 /* vsync */ >; }; }; @@ -387,26 +434,62 @@ ipu_disp2 { pinctrl_ipu_disp2_1: ipudisp2grp-1 { fsl,pins = < - 603 0x5 /* MX51_PAD_DISP2_DAT0__DISP2_DAT0 */ - 608 0x5 /* MX51_PAD_DISP2_DAT1__DISP2_DAT1 */ - 613 0x5 /* MX51_PAD_DISP2_DAT2__DISP2_DAT2 */ - 614 0x5 /* MX51_PAD_DISP2_DAT3__DISP2_DAT3 */ - 615 0x5 /* MX51_PAD_DISP2_DAT4__DISP2_DAT4 */ - 616 0x5 /* MX51_PAD_DISP2_DAT5__DISP2_DAT5 */ - 617 0x5 /* MX51_PAD_DISP2_DAT6__DISP2_DAT6 */ - 622 0x5 /* MX51_PAD_DISP2_DAT7__DISP2_DAT7 */ - 627 0x5 /* MX51_PAD_DISP2_DAT8__DISP2_DAT8 */ - 633 0x5 /* MX51_PAD_DISP2_DAT9__DISP2_DAT9 */ - 637 0x5 /* MX51_PAD_DISP2_DAT10__DISP2_DAT10 */ - 643 0x5 /* MX51_PAD_DISP2_DAT11__DISP2_DAT11 */ - 648 0x5 /* MX51_PAD_DISP2_DAT12__DISP2_DAT12 */ - 652 0x5 /* MX51_PAD_DISP2_DAT13__DISP2_DAT13 */ - 656 0x5 /* MX51_PAD_DISP2_DAT14__DISP2_DAT14 */ - 661 0x5 /* MX51_PAD_DISP2_DAT15__DISP2_DAT15 */ - 593 0x5 /* MX51_PAD_DI2_PIN2__DI2_PIN2 (hsync) */ - 595 0x5 /* MX51_PAD_DI2_PIN3__DI2_PIN3 (vsync) */ - 597 0x5 /* MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK */ - 599 0x5 /* MX51_PAD_DI_GP4__DI2_PIN15 */ + MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 + MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 + MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 + MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 + MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 + MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 + MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 + MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 + MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 + MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 + MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 + MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 + MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 + MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 + MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 + MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 + MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 /* hsync */ + MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 /* vsync */ + MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 + MX51_PAD_DI_GP4__DI2_PIN15 0x5 + >; + }; + }; + + pata { + pinctrl_pata_1: patagrp-1 { + fsl,pins = < + MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004 + MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004 + MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004 + MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004 + MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004 + MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004 + MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004 + MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004 + MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004 + MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004 + MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004 + MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004 + MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004 + MX51_PAD_NANDF_D15__PATA_DATA15 0x2004 + MX51_PAD_NANDF_D14__PATA_DATA14 0x2004 + MX51_PAD_NANDF_D13__PATA_DATA13 0x2004 + MX51_PAD_NANDF_D12__PATA_DATA12 0x2004 + MX51_PAD_NANDF_D11__PATA_DATA11 0x2004 + MX51_PAD_NANDF_D10__PATA_DATA10 0x2004 + MX51_PAD_NANDF_D9__PATA_DATA9 0x2004 + MX51_PAD_NANDF_D8__PATA_DATA8 0x2004 + MX51_PAD_NANDF_D7__PATA_DATA7 0x2004 + MX51_PAD_NANDF_D6__PATA_DATA6 0x2004 + MX51_PAD_NANDF_D5__PATA_DATA5 0x2004 + MX51_PAD_NANDF_D4__PATA_DATA4 0x2004 + MX51_PAD_NANDF_D3__PATA_DATA3 0x2004 + MX51_PAD_NANDF_D2__PATA_DATA2 0x2004 + MX51_PAD_NANDF_D1__PATA_DATA1 0x2004 + MX51_PAD_NANDF_D0__PATA_DATA0 0x2004 >; }; }; @@ -414,10 +497,10 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */ - 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */ - 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */ - 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */ + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 >; }; }; @@ -425,8 +508,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */ - 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */ + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 >; }; }; @@ -434,17 +517,17 @@ uart3 { pinctrl_uart3_1: uart3grp-1 { fsl,pins = < - 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */ - 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */ - 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */ - 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */ + MX51_PAD_EIM_D25__UART3_RXD 0x1c5 + MX51_PAD_EIM_D26__UART3_TXD 0x1c5 + MX51_PAD_EIM_D27__UART3_RTS 0x1c5 + MX51_PAD_EIM_D24__UART3_CTS 0x1c5 >; }; pinctrl_uart3_2: uart3grp-2 { fsl,pins = < - 434 0x1c5 /* MX51_PAD_UART3_RXD__UART3_RXD */ - 430 0x1c5 /* MX51_PAD_UART3_TXD__UART3_TXD */ + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 >; }; }; @@ -452,14 +535,14 @@ kpp { pinctrl_kpp_1: kppgrp-1 { fsl,pins = < - 438 0xe0 /* MX51_PAD_KEY_ROW0__KEY_ROW0 */ - 439 0xe0 /* MX51_PAD_KEY_ROW1__KEY_ROW1 */ - 440 0xe0 /* MX51_PAD_KEY_ROW2__KEY_ROW2 */ - 441 0xe0 /* MX51_PAD_KEY_ROW3__KEY_ROW3 */ - 442 0xe8 /* MX51_PAD_KEY_COL0__KEY_COL0 */ - 444 0xe8 /* MX51_PAD_KEY_COL1__KEY_COL1 */ - 446 0xe8 /* MX51_PAD_KEY_COL2__KEY_COL2 */ - 448 0xe8 /* MX51_PAD_KEY_COL3__KEY_COL3 */ + MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 + MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 + MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 + MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 + MX51_PAD_KEY_COL0__KEY_COL0 0xe8 + MX51_PAD_KEY_COL1__KEY_COL1 0xe8 + MX51_PAD_KEY_COL2__KEY_COL2 0xe8 + MX51_PAD_KEY_COL3__KEY_COL3 0xe8 >; }; }; @@ -501,6 +584,12 @@ status = "disabled"; }; + src: src@73fd0000 { + compatible = "fsl,imx51-src"; + reg = <0x73fd0000 0x4000>; + #reset-cells = <1>; + }; + clks: ccm@73fd4000{ compatible = "fsl,imx51-ccm"; reg = <0x73fd4000 0x4000>; @@ -591,6 +680,14 @@ status = "disabled"; }; + pata: pata@83fe0000 { + compatible = "fsl,imx51-pata", "fsl,imx27-pata"; + reg = <0x83fe0000 0x4000>; + interrupts = <70>; + clocks = <&clks 161>; + status = "disabled"; + }; + ssi3: ssi@83fe8000 { compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index e049fd0319e8..174f86938c89 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "Freescale i.MX53 Automotive Reference Design Board"; @@ -112,40 +112,40 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */ - 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */ - 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */ - 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */ - 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */ - 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */ - 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */ - 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */ - 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */ - 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */ - 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */ - 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */ - 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */ - 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */ - 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */ - 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */ - 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */ - 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */ - 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */ - 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */ - 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */ - 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */ - 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */ - 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */ - 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */ - 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */ - 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */ - 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */ - 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */ - 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */ - 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */ - 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */ - 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */ - 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */ + MX53_PAD_GPIO_1__GPIO1_1 0x80000000 + MX53_PAD_GPIO_9__GPIO1_9 0x80000000 + MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 + MX53_PAD_GPIO_10__GPIO4_0 0x80000000 + MX53_PAD_DISP0_DAT16__GPIO5_10 0x80000000 + MX53_PAD_DISP0_DAT17__GPIO5_11 0x80000000 + MX53_PAD_DISP0_DAT18__GPIO5_12 0x80000000 + MX53_PAD_DISP0_DAT19__GPIO5_13 0x80000000 + MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x80000000 + MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x80000000 + MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x80000000 + MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x80000000 + MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x80000000 + MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x80000000 + MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x80000000 + MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x80000000 + MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x80000000 + MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x80000000 + MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x80000000 + MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x80000000 + MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x80000000 + MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x80000000 + MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x80000000 + MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x80000000 + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000 + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000 + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000 + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000 + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000 + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000 + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000 + MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000 + MX53_PAD_EIM_RW__EMI_WEIM_RW 0x80000000 + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 85a89b52f9b8..801fda728ed6 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "Freescale i.MX53 Evaluation Kit"; @@ -82,14 +82,14 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ - 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ - 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ - 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + MX53_PAD_EIM_EB2__GPIO2_30 0x80000000 + MX53_PAD_EIM_D19__GPIO3_19 0x80000000 + MX53_PAD_EIM_DA11__GPIO3_11 0x80000000 + MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 + MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 + MX53_PAD_EIM_DA14__GPIO3_14 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 468c0a1d48d9..445a01119cc5 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53-tqma53.dtsi" +#include "imx53-tqma53.dtsi" / { model = "TQ MBa53 starter kit"; @@ -21,51 +21,57 @@ &iomuxc { lvds1 { pinctrl_lvds1_1: lvds1-grp1 { - fsl,pins = <730 0x10000 /* LVDS0_TX3 */ - 732 0x10000 /* LVDS0_CLK */ - 734 0x10000 /* LVDS0_TX2 */ - 736 0x10000 /* LVDS0_TX1 */ - 738 0x10000>; /* LVDS0_TX0 */ + fsl,pins = < + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x10000 + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x10000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x10000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x10000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x10000 + >; }; pinctrl_lvds1_2: lvds1-grp2 { - fsl,pins = <720 0x10000 /* LVDS1_TX3 */ - 722 0x10000 /* LVDS1_TX2 */ - 724 0x10000 /* LVDS1_CLK */ - 726 0x10000 /* LVDS1_TX1 */ - 728 0x10000>; /* LVDS1_TX0 */ + fsl,pins = < + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x10000 + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x10000 + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x10000 + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x10000 + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x10000 + >; }; }; disp1 { pinctrl_disp1_1: disp1-grp1 { - fsl,pins = <689 0x10000 /* DISP1_DRDY */ - 482 0x10000 /* DISP1_HSYNC */ - 489 0x10000 /* DISP1_VSYNC */ - 515 0x10000 /* DISP1_DAT_22 */ - 523 0x10000 /* DISP1_DAT_23 */ - 545 0x10000 /* DISP1_DAT_21 */ - 553 0x10000 /* DISP1_DAT_20 */ - 558 0x10000 /* DISP1_DAT_19 */ - 564 0x10000 /* DISP1_DAT_18 */ - 570 0x10000 /* DISP1_DAT_17 */ - 575 0x10000 /* DISP1_DAT_16 */ - 580 0x10000 /* DISP1_DAT_15 */ - 585 0x10000 /* DISP1_DAT_14 */ - 590 0x10000 /* DISP1_DAT_13 */ - 595 0x10000 /* DISP1_DAT_12 */ - 628 0x10000 /* DISP1_DAT_11 */ - 634 0x10000 /* DISP1_DAT_10 */ - 639 0x10000 /* DISP1_DAT_9 */ - 644 0x10000 /* DISP1_DAT_8 */ - 649 0x10000 /* DISP1_DAT_7 */ - 654 0x10000 /* DISP1_DAT_6 */ - 659 0x10000 /* DISP1_DAT_5 */ - 664 0x10000 /* DISP1_DAT_4 */ - 669 0x10000 /* DISP1_DAT_3 */ - 674 0x10000 /* DISP1_DAT_2 */ - 679 0x10000 /* DISP1_DAT_1 */ - 684 0x10000>; /* DISP1_DAT_0 */ + fsl,pins = < + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x10000 /* DISP1_DRDY */ + MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x10000 /* DISP1_HSYNC */ + MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x10000 /* DISP1_VSYNC */ + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x10000 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x10000 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x10000 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x10000 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x10000 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x10000 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x10000 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x10000 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x10000 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x10000 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x10000 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x10000 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x10000 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x10000 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x10000 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x10000 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x10000 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x10000 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x10000 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x10000 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x10000 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x10000 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x10000 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x10000 + >; }; }; }; diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h new file mode 100644 index 000000000000..aec406bc65eb --- /dev/null +++ b/arch/arm/boot/dts/imx53-pinfunc.h @@ -0,0 +1,1189 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX53_PINFUNC_H +#define __DTS_IMX53_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX53_PAD_GPIO_19__KPP_COL_5 0x020 0x348 0x840 0x0 0x0 +#define MX53_PAD_GPIO_19__GPIO4_5 0x020 0x348 0x000 0x1 0x0 +#define MX53_PAD_GPIO_19__CCM_CLKO 0x020 0x348 0x000 0x2 0x0 +#define MX53_PAD_GPIO_19__SPDIF_OUT1 0x020 0x348 0x000 0x3 0x0 +#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 0x020 0x348 0x000 0x4 0x0 +#define MX53_PAD_GPIO_19__ECSPI1_RDY 0x020 0x348 0x000 0x5 0x0 +#define MX53_PAD_GPIO_19__FEC_TDATA_3 0x020 0x348 0x000 0x6 0x0 +#define MX53_PAD_GPIO_19__SRC_INT_BOOT 0x020 0x348 0x000 0x7 0x0 +#define MX53_PAD_KEY_COL0__KPP_COL_0 0x024 0x34c 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL0__GPIO4_6 0x024 0x34c 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x024 0x34c 0x758 0x2 0x0 +#define MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x024 0x34c 0x000 0x4 0x0 +#define MX53_PAD_KEY_COL0__ECSPI1_SCLK 0x024 0x34c 0x79c 0x5 0x0 +#define MX53_PAD_KEY_COL0__FEC_RDATA_3 0x024 0x34c 0x000 0x6 0x0 +#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST 0x024 0x34c 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW0__KPP_ROW_0 0x028 0x350 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW0__GPIO4_7 0x028 0x350 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x028 0x350 0x74c 0x2 0x0 +#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x028 0x350 0x890 0x4 0x1 +#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI 0x028 0x350 0x7a4 0x5 0x0 +#define MX53_PAD_KEY_ROW0__FEC_TX_ER 0x028 0x350 0x000 0x6 0x0 +#define MX53_PAD_KEY_COL1__KPP_COL_1 0x02c 0x354 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL1__GPIO4_8 0x02c 0x354 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x02c 0x354 0x75c 0x2 0x0 +#define MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x02c 0x354 0x000 0x4 0x0 +#define MX53_PAD_KEY_COL1__ECSPI1_MISO 0x02c 0x354 0x7a0 0x5 0x0 +#define MX53_PAD_KEY_COL1__FEC_RX_CLK 0x02c 0x354 0x808 0x6 0x0 +#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY 0x02c 0x354 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW1__KPP_ROW_1 0x030 0x358 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW1__GPIO4_9 0x030 0x358 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x030 0x358 0x748 0x2 0x0 +#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x030 0x358 0x898 0x4 0x1 +#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 0x030 0x358 0x7a8 0x5 0x0 +#define MX53_PAD_KEY_ROW1__FEC_COL 0x030 0x358 0x800 0x6 0x0 +#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID 0x030 0x358 0x000 0x7 0x0 +#define MX53_PAD_KEY_COL2__KPP_COL_2 0x034 0x35c 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL2__GPIO4_10 0x034 0x35c 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL2__CAN1_TXCAN 0x034 0x35c 0x000 0x2 0x0 +#define MX53_PAD_KEY_COL2__FEC_MDIO 0x034 0x35c 0x804 0x4 0x0 +#define MX53_PAD_KEY_COL2__ECSPI1_SS1 0x034 0x35c 0x7ac 0x5 0x0 +#define MX53_PAD_KEY_COL2__FEC_RDATA_2 0x034 0x35c 0x000 0x6 0x0 +#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE 0x034 0x35c 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW2__KPP_ROW_2 0x038 0x360 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW2__GPIO4_11 0x038 0x360 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x038 0x360 0x760 0x2 0x0 +#define MX53_PAD_KEY_ROW2__FEC_MDC 0x038 0x360 0x000 0x4 0x0 +#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 0x038 0x360 0x7b0 0x5 0x0 +#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x038 0x360 0x000 0x6 0x0 +#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR 0x038 0x360 0x000 0x7 0x0 +#define MX53_PAD_KEY_COL3__KPP_COL_3 0x03c 0x364 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL3__GPIO4_12 0x03c 0x364 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL3__USBOH3_H2_DP 0x03c 0x364 0x000 0x2 0x0 +#define MX53_PAD_KEY_COL3__SPDIF_IN1 0x03c 0x364 0x870 0x3 0x0 +#define MX53_PAD_KEY_COL3__I2C2_SCL 0x03c 0x364 0x81c 0x4 0x0 +#define MX53_PAD_KEY_COL3__ECSPI1_SS3 0x03c 0x364 0x7b4 0x5 0x0 +#define MX53_PAD_KEY_COL3__FEC_CRS 0x03c 0x364 0x000 0x6 0x0 +#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK 0x03c 0x364 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW3__KPP_ROW_3 0x040 0x368 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW3__GPIO4_13 0x040 0x368 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM 0x040 0x368 0x000 0x2 0x0 +#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK 0x040 0x368 0x768 0x3 0x0 +#define MX53_PAD_KEY_ROW3__I2C2_SDA 0x040 0x368 0x820 0x4 0x0 +#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT 0x040 0x368 0x000 0x5 0x0 +#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP 0x040 0x368 0x77c 0x6 0x0 +#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 0x040 0x368 0x000 0x7 0x0 +#define MX53_PAD_KEY_COL4__KPP_COL_4 0x044 0x36c 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL4__GPIO4_14 0x044 0x36c 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL4__CAN2_TXCAN 0x044 0x36c 0x000 0x2 0x0 +#define MX53_PAD_KEY_COL4__IPU_SISG_4 0x044 0x36c 0x000 0x3 0x0 +#define MX53_PAD_KEY_COL4__UART5_RTS 0x044 0x36c 0x894 0x4 0x0 +#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x044 0x36c 0x89c 0x5 0x0 +#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 0x044 0x36c 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW4__KPP_ROW_4 0x048 0x370 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW4__GPIO4_15 0x048 0x370 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x048 0x370 0x764 0x2 0x0 +#define MX53_PAD_KEY_ROW4__IPU_SISG_5 0x048 0x370 0x000 0x3 0x0 +#define MX53_PAD_KEY_ROW4__UART5_CTS 0x048 0x370 0x000 0x4 0x0 +#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR 0x048 0x370 0x000 0x5 0x0 +#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID 0x048 0x370 0x000 0x7 0x0 +#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x04c 0x378 0x000 0x0 0x0 +#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 0x04c 0x378 0x000 0x1 0x0 +#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x04c 0x378 0x000 0x2 0x0 +#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 0x04c 0x378 0x000 0x5 0x0 +#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 0x04c 0x378 0x000 0x6 0x0 +#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID 0x04c 0x378 0x000 0x7 0x0 +#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x050 0x37c 0x000 0x0 0x0 +#define MX53_PAD_DI0_PIN15__GPIO4_17 0x050 0x37c 0x000 0x1 0x0 +#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x050 0x37c 0x000 0x2 0x0 +#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 0x050 0x37c 0x000 0x5 0x0 +#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 0x050 0x37c 0x000 0x6 0x0 +#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID 0x050 0x37c 0x000 0x7 0x0 +#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x054 0x380 0x000 0x0 0x0 +#define MX53_PAD_DI0_PIN2__GPIO4_18 0x054 0x380 0x000 0x1 0x0 +#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x054 0x380 0x000 0x2 0x0 +#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 0x054 0x380 0x000 0x5 0x0 +#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 0x054 0x380 0x000 0x6 0x0 +#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION 0x054 0x380 0x000 0x7 0x0 +#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x058 0x384 0x000 0x0 0x0 +#define MX53_PAD_DI0_PIN3__GPIO4_19 0x058 0x384 0x000 0x1 0x0 +#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x058 0x384 0x000 0x2 0x0 +#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 0x058 0x384 0x000 0x5 0x0 +#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 0x058 0x384 0x000 0x6 0x0 +#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG 0x058 0x384 0x000 0x7 0x0 +#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 0x05c 0x388 0x000 0x0 0x0 +#define MX53_PAD_DI0_PIN4__GPIO4_20 0x05c 0x388 0x000 0x1 0x0 +#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x05c 0x388 0x000 0x2 0x0 +#define MX53_PAD_DI0_PIN4__ESDHC1_WP 0x05c 0x388 0x7fc 0x3 0x0 +#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD 0x05c 0x388 0x000 0x5 0x0 +#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 0x05c 0x388 0x000 0x6 0x0 +#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT 0x05c 0x388 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x060 0x38c 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT0__GPIO4_21 0x060 0x38c 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT0__CSPI_SCLK 0x060 0x38c 0x780 0x2 0x0 +#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x060 0x38c 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN 0x060 0x38c 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 0x060 0x38c 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY 0x060 0x38c 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x064 0x390 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT1__GPIO4_22 0x064 0x390 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT1__CSPI_MOSI 0x064 0x390 0x788 0x2 0x0 +#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x064 0x390 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x064 0x390 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 0x064 0x390 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID 0x064 0x390 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x068 0x394 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT2__GPIO4_23 0x068 0x394 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT2__CSPI_MISO 0x068 0x394 0x784 0x2 0x0 +#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x068 0x394 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE 0x068 0x394 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 0x068 0x394 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE 0x068 0x394 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x06c 0x398 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT3__GPIO4_24 0x06c 0x398 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT3__CSPI_SS0 0x06c 0x398 0x78c 0x2 0x0 +#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x06c 0x398 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR 0x06c 0x398 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 0x06c 0x398 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR 0x06c 0x398 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x070 0x39c 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT4__GPIO4_25 0x070 0x39c 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT4__CSPI_SS1 0x070 0x39c 0x790 0x2 0x0 +#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x070 0x39c 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB 0x070 0x39c 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 0x070 0x39c 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK 0x070 0x39c 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x074 0x3a0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT5__GPIO4_26 0x074 0x3a0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT5__CSPI_SS2 0x074 0x3a0 0x794 0x2 0x0 +#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x074 0x3a0 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS 0x074 0x3a0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 0x074 0x3a0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 0x074 0x3a0 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x078 0x3a4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT6__GPIO4_27 0x078 0x3a4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT6__CSPI_SS3 0x078 0x3a4 0x798 0x2 0x0 +#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x078 0x3a4 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE 0x078 0x3a4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 0x078 0x3a4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 0x078 0x3a4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x07c 0x3a8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT7__GPIO4_28 0x07c 0x3a8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT7__CSPI_RDY 0x07c 0x3a8 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x07c 0x3a8 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 0x07c 0x3a8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 0x07c 0x3a8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID 0x07c 0x3a8 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x080 0x3ac 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT8__GPIO4_29 0x080 0x3ac 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x080 0x3ac 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B 0x080 0x3ac 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 0x080 0x3ac 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 0x080 0x3ac 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID 0x080 0x3ac 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x084 0x3b0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT9__GPIO4_30 0x084 0x3b0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x084 0x3b0 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B 0x084 0x3b0 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 0x084 0x3b0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 0x084 0x3b0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 0x084 0x3b0 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x088 0x3b4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT10__GPIO4_31 0x088 0x3b4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x088 0x3b4 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 0x088 0x3b4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 0x088 0x3b4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 0x088 0x3b4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x08c 0x3b8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT11__GPIO5_5 0x08c 0x3b8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x08c 0x3b8 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 0x08c 0x3b8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 0x08c 0x3b8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 0x08c 0x3b8 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x090 0x3bc 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT12__GPIO5_6 0x090 0x3bc 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x090 0x3bc 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 0x090 0x3bc 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 0x090 0x3bc 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 0x090 0x3bc 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x094 0x3c0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT13__GPIO5_7 0x094 0x3c0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS 0x094 0x3c0 0x754 0x3 0x0 +#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 0x094 0x3c0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 0x094 0x3c0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 0x094 0x3c0 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x098 0x3c4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT14__GPIO5_8 0x098 0x3c4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC 0x098 0x3c4 0x750 0x3 0x0 +#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 0x098 0x3c4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 0x098 0x3c4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 0x098 0x3c4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x09c 0x3c8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT15__GPIO5_9 0x09c 0x3c8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 0x09c 0x3c8 0x7ac 0x2 0x1 +#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 0x09c 0x3c8 0x7c8 0x3 0x0 +#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 0x09c 0x3c8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 0x09c 0x3c8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 0x09c 0x3c8 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x0a0 0x3cc 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT16__GPIO5_10 0x0a0 0x3cc 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0a0 0x3cc 0x7c0 0x2 0x0 +#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x0a0 0x3cc 0x758 0x3 0x1 +#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 0x0a0 0x3cc 0x868 0x4 0x0 +#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 0x0a0 0x3cc 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 0x0a0 0x3cc 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 0x0a0 0x3cc 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x0a4 0x3d0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT17__GPIO5_11 0x0a4 0x3d0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO 0x0a4 0x3d0 0x7bc 0x2 0x0 +#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x0a4 0x3d0 0x74c 0x3 0x1 +#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 0x0a4 0x3d0 0x86c 0x4 0x0 +#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 0x0a4 0x3d0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 0x0a4 0x3d0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x0a8 0x3d4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT18__GPIO5_12 0x0a8 0x3d4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 0x0a8 0x3d4 0x7c4 0x2 0x0 +#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x0a8 0x3d4 0x75c 0x3 0x1 +#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS 0x0a8 0x3d4 0x73c 0x4 0x0 +#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 0x0a8 0x3d4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 0x0a8 0x3d4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 0x0a8 0x3d4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x0ac 0x3d8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT19__GPIO5_13 0x0ac 0x3d8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0ac 0x3d8 0x7b8 0x2 0x0 +#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x0ac 0x3d8 0x748 0x3 0x1 +#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC 0x0ac 0x3d8 0x738 0x4 0x0 +#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 0x0ac 0x3d8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 0x0ac 0x3d8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 0x0ac 0x3d8 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x0b0 0x3dc 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT20__GPIO5_14 0x0b0 0x3dc 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0b0 0x3dc 0x79c 0x2 0x1 +#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC 0x0b0 0x3dc 0x740 0x3 0x0 +#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 0x0b0 0x3dc 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 0x0b0 0x3dc 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI 0x0b0 0x3dc 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x0b4 0x3e0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT21__GPIO5_15 0x0b4 0x3e0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0b4 0x3e0 0x7a4 0x2 0x1 +#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD 0x0b4 0x3e0 0x734 0x3 0x0 +#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 0x0b4 0x3e0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 0x0b4 0x3e0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO 0x0b4 0x3e0 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x0b8 0x3e4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT22__GPIO5_16 0x0b8 0x3e4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x0b8 0x3e4 0x7a0 0x2 0x1 +#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS 0x0b8 0x3e4 0x744 0x3 0x0 +#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 0x0b8 0x3e4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 0x0b8 0x3e4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK 0x0b8 0x3e4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x0bc 0x3e8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT23__GPIO5_17 0x0bc 0x3e8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 0x0bc 0x3e8 0x7a8 0x2 0x1 +#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD 0x0bc 0x3e8 0x730 0x3 0x0 +#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 0x0bc 0x3e8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 0x0bc 0x3e8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS 0x0bc 0x3e8 0x000 0x7 0x0 +#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x0c0 0x3ec 0x000 0x0 0x0 +#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0c0 0x3ec 0x000 0x1 0x0 +#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 0x0c0 0x3ec 0x000 0x5 0x0 +#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 0x0c0 0x3ec 0x000 0x6 0x0 +#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x0c4 0x3f0 0x000 0x0 0x0 +#define MX53_PAD_CSI0_MCLK__GPIO5_19 0x0c4 0x3f0 0x000 0x1 0x0 +#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x0c4 0x3f0 0x000 0x2 0x0 +#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 0x0c4 0x3f0 0x000 0x5 0x0 +#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 0x0c4 0x3f0 0x000 0x6 0x0 +#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL 0x0c4 0x3f0 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x0c8 0x3f4 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0c8 0x3f4 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 0x0c8 0x3f4 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 0x0c8 0x3f4 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK 0x0c8 0x3f4 0x000 0x7 0x0 +#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x0cc 0x3f8 0x000 0x0 0x0 +#define MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0cc 0x3f8 0x000 0x1 0x0 +#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 0x0cc 0x3f8 0x000 0x5 0x0 +#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 0x0cc 0x3f8 0x000 0x6 0x0 +#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 0x0cc 0x3f8 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x0d0 0x3fc 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT4__GPIO5_22 0x0d0 0x3fc 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT4__KPP_COL_5 0x0d0 0x3fc 0x840 0x2 0x1 +#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK 0x0d0 0x3fc 0x79c 0x3 0x2 +#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x0d0 0x3fc 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x0d0 0x3fc 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 0x0d0 0x3fc 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 0x0d0 0x3fc 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x0d4 0x400 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT5__GPIO5_23 0x0d4 0x400 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 0x0d4 0x400 0x84c 0x2 0x0 +#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI 0x0d4 0x400 0x7a4 0x3 0x2 +#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x0d4 0x400 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x0d4 0x400 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 0x0d4 0x400 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 0x0d4 0x400 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x0d8 0x404 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT6__GPIO5_24 0x0d8 0x404 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT6__KPP_COL_6 0x0d8 0x404 0x844 0x2 0x0 +#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO 0x0d8 0x404 0x7a0 0x3 0x2 +#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x0d8 0x404 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x0d8 0x404 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 0x0d8 0x404 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 0x0d8 0x404 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x0dc 0x408 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT7__GPIO5_25 0x0dc 0x408 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 0x0dc 0x408 0x850 0x2 0x0 +#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 0x0dc 0x408 0x7a8 0x3 0x2 +#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x0dc 0x408 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x0dc 0x408 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 0x0dc 0x408 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 0x0dc 0x408 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x0e0 0x40c 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT8__GPIO5_26 0x0e0 0x40c 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT8__KPP_COL_7 0x0e0 0x40c 0x848 0x2 0x0 +#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK 0x0e0 0x40c 0x7b8 0x3 0x1 +#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x0e0 0x40c 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT8__I2C1_SDA 0x0e0 0x40c 0x818 0x5 0x0 +#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 0x0e0 0x40c 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 0x0e0 0x40c 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x0e4 0x410 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT9__GPIO5_27 0x0e4 0x410 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 0x0e4 0x410 0x854 0x2 0x0 +#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 0x0e4 0x410 0x7c0 0x3 0x1 +#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR 0x0e4 0x410 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT9__I2C1_SCL 0x0e4 0x410 0x814 0x5 0x0 +#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 0x0e4 0x410 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 0x0e4 0x410 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x0e8 0x414 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT10__GPIO5_28 0x0e8 0x414 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x0e8 0x414 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO 0x0e8 0x414 0x7bc 0x3 0x1 +#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC 0x0e8 0x414 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 0x0e8 0x414 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 0x0e8 0x414 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 0x0e8 0x414 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x0ec 0x418 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT11__GPIO5_29 0x0ec 0x418 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x0ec 0x418 0x878 0x2 0x1 +#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 0x0ec 0x418 0x7c4 0x3 0x1 +#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS 0x0ec 0x418 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 0x0ec 0x418 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 0x0ec 0x418 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 0x0ec 0x418 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x0f0 0x41c 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT12__GPIO5_30 0x0f0 0x41c 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x0f0 0x41c 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x0f0 0x41c 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 0x0f0 0x41c 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 0x0f0 0x41c 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 0x0f0 0x41c 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x0f4 0x420 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT13__GPIO5_31 0x0f4 0x420 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x0f4 0x420 0x890 0x2 0x3 +#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x0f4 0x420 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 0x0f4 0x420 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 0x0f4 0x420 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 0x0f4 0x420 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x0f8 0x424 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT14__GPIO6_0 0x0f8 0x424 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX 0x0f8 0x424 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x0f8 0x424 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 0x0f8 0x424 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 0x0f8 0x424 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 0x0f8 0x424 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x0fc 0x428 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT15__GPIO6_1 0x0fc 0x428 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX 0x0fc 0x428 0x898 0x2 0x3 +#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x0fc 0x428 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 0x0fc 0x428 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 0x0fc 0x428 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 0x0fc 0x428 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x100 0x42c 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT16__GPIO6_2 0x100 0x42c 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT16__UART4_RTS 0x100 0x42c 0x88c 0x2 0x0 +#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x100 0x42c 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 0x100 0x42c 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 0x100 0x42c 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 0x100 0x42c 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x104 0x430 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT17__GPIO6_3 0x104 0x430 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT17__UART4_CTS 0x104 0x430 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x104 0x430 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 0x104 0x430 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 0x104 0x430 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 0x104 0x430 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x108 0x434 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT18__GPIO6_4 0x108 0x434 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT18__UART5_RTS 0x108 0x434 0x894 0x2 0x2 +#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x108 0x434 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 0x108 0x434 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 0x108 0x434 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 0x108 0x434 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x10c 0x438 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT19__GPIO6_5 0x10c 0x438 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT19__UART5_CTS 0x10c 0x438 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x10c 0x438 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 0x10c 0x438 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 0x10c 0x438 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK 0x10c 0x438 0x000 0x7 0x0 +#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 0x110 0x458 0x000 0x0 0x0 +#define MX53_PAD_EIM_A25__GPIO5_2 0x110 0x458 0x000 0x1 0x0 +#define MX53_PAD_EIM_A25__ECSPI2_RDY 0x110 0x458 0x000 0x2 0x0 +#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x110 0x458 0x000 0x3 0x0 +#define MX53_PAD_EIM_A25__CSPI_SS1 0x110 0x458 0x790 0x4 0x1 +#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS 0x110 0x458 0x000 0x6 0x0 +#define MX53_PAD_EIM_A25__USBPHY1_BISTOK 0x110 0x458 0x000 0x7 0x0 +#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 0x114 0x45c 0x000 0x0 0x0 +#define MX53_PAD_EIM_EB2__GPIO2_30 0x114 0x45c 0x000 0x1 0x0 +#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK 0x114 0x45c 0x76c 0x2 0x0 +#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS 0x114 0x45c 0x000 0x3 0x0 +#define MX53_PAD_EIM_EB2__ECSPI1_SS0 0x114 0x45c 0x7a8 0x4 0x3 +#define MX53_PAD_EIM_EB2__I2C2_SCL 0x114 0x45c 0x81c 0x5 0x1 +#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x118 0x460 0x000 0x0 0x0 +#define MX53_PAD_EIM_D16__GPIO3_16 0x118 0x460 0x000 0x1 0x0 +#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 0x118 0x460 0x000 0x2 0x0 +#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK 0x118 0x460 0x000 0x3 0x0 +#define MX53_PAD_EIM_D16__ECSPI1_SCLK 0x118 0x460 0x79c 0x4 0x3 +#define MX53_PAD_EIM_D16__I2C2_SDA 0x118 0x460 0x820 0x5 0x1 +#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x11c 0x464 0x000 0x0 0x0 +#define MX53_PAD_EIM_D17__GPIO3_17 0x11c 0x464 0x000 0x1 0x0 +#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 0x11c 0x464 0x000 0x2 0x0 +#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN 0x11c 0x464 0x830 0x3 0x0 +#define MX53_PAD_EIM_D17__ECSPI1_MISO 0x11c 0x464 0x7a0 0x4 0x3 +#define MX53_PAD_EIM_D17__I2C3_SCL 0x11c 0x464 0x824 0x5 0x0 +#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x120 0x468 0x000 0x0 0x0 +#define MX53_PAD_EIM_D18__GPIO3_18 0x120 0x468 0x000 0x1 0x0 +#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 0x120 0x468 0x000 0x2 0x0 +#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO 0x120 0x468 0x830 0x3 0x1 +#define MX53_PAD_EIM_D18__ECSPI1_MOSI 0x120 0x468 0x7a4 0x4 0x3 +#define MX53_PAD_EIM_D18__I2C3_SDA 0x120 0x468 0x828 0x5 0x0 +#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS 0x120 0x468 0x000 0x6 0x0 +#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x124 0x46c 0x000 0x0 0x0 +#define MX53_PAD_EIM_D19__GPIO3_19 0x124 0x46c 0x000 0x1 0x0 +#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 0x124 0x46c 0x000 0x2 0x0 +#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS 0x124 0x46c 0x000 0x3 0x0 +#define MX53_PAD_EIM_D19__ECSPI1_SS1 0x124 0x46c 0x7ac 0x4 0x2 +#define MX53_PAD_EIM_D19__EPIT1_EPITO 0x124 0x46c 0x000 0x5 0x0 +#define MX53_PAD_EIM_D19__UART1_CTS 0x124 0x46c 0x000 0x6 0x0 +#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC 0x124 0x46c 0x8a4 0x7 0x0 +#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x128 0x470 0x000 0x0 0x0 +#define MX53_PAD_EIM_D20__GPIO3_20 0x128 0x470 0x000 0x1 0x0 +#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 0x128 0x470 0x000 0x2 0x0 +#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS 0x128 0x470 0x000 0x3 0x0 +#define MX53_PAD_EIM_D20__CSPI_SS0 0x128 0x470 0x78c 0x4 0x1 +#define MX53_PAD_EIM_D20__EPIT2_EPITO 0x128 0x470 0x000 0x5 0x0 +#define MX53_PAD_EIM_D20__UART1_RTS 0x128 0x470 0x874 0x6 0x1 +#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR 0x128 0x470 0x000 0x7 0x0 +#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x12c 0x474 0x000 0x0 0x0 +#define MX53_PAD_EIM_D21__GPIO3_21 0x12c 0x474 0x000 0x1 0x0 +#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 0x12c 0x474 0x000 0x2 0x0 +#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK 0x12c 0x474 0x000 0x3 0x0 +#define MX53_PAD_EIM_D21__CSPI_SCLK 0x12c 0x474 0x780 0x4 0x1 +#define MX53_PAD_EIM_D21__I2C1_SCL 0x12c 0x474 0x814 0x5 0x1 +#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC 0x12c 0x474 0x89c 0x6 0x1 +#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x130 0x478 0x000 0x0 0x0 +#define MX53_PAD_EIM_D22__GPIO3_22 0x130 0x478 0x000 0x1 0x0 +#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 0x130 0x478 0x000 0x2 0x0 +#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN 0x130 0x478 0x82c 0x3 0x0 +#define MX53_PAD_EIM_D22__CSPI_MISO 0x130 0x478 0x784 0x4 0x1 +#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR 0x130 0x478 0x000 0x6 0x0 +#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x134 0x47c 0x000 0x0 0x0 +#define MX53_PAD_EIM_D23__GPIO3_23 0x134 0x47c 0x000 0x1 0x0 +#define MX53_PAD_EIM_D23__UART3_CTS 0x134 0x47c 0x000 0x2 0x0 +#define MX53_PAD_EIM_D23__UART1_DCD 0x134 0x47c 0x000 0x3 0x0 +#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS 0x134 0x47c 0x000 0x4 0x0 +#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x134 0x47c 0x000 0x5 0x0 +#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN 0x134 0x47c 0x834 0x6 0x0 +#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 0x134 0x47c 0x000 0x7 0x0 +#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 0x138 0x480 0x000 0x0 0x0 +#define MX53_PAD_EIM_EB3__GPIO2_31 0x138 0x480 0x000 0x1 0x0 +#define MX53_PAD_EIM_EB3__UART3_RTS 0x138 0x480 0x884 0x2 0x1 +#define MX53_PAD_EIM_EB3__UART1_RI 0x138 0x480 0x000 0x3 0x0 +#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x138 0x480 0x000 0x5 0x0 +#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC 0x138 0x480 0x838 0x6 0x0 +#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 0x138 0x480 0x000 0x7 0x0 +#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x13c 0x484 0x000 0x0 0x0 +#define MX53_PAD_EIM_D24__GPIO3_24 0x13c 0x484 0x000 0x1 0x0 +#define MX53_PAD_EIM_D24__UART3_TXD_MUX 0x13c 0x484 0x000 0x2 0x0 +#define MX53_PAD_EIM_D24__ECSPI1_SS2 0x13c 0x484 0x7b0 0x3 0x1 +#define MX53_PAD_EIM_D24__CSPI_SS2 0x13c 0x484 0x794 0x4 0x1 +#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS 0x13c 0x484 0x754 0x5 0x1 +#define MX53_PAD_EIM_D24__ECSPI2_SS2 0x13c 0x484 0x000 0x6 0x0 +#define MX53_PAD_EIM_D24__UART1_DTR 0x13c 0x484 0x000 0x7 0x0 +#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x140 0x488 0x000 0x0 0x0 +#define MX53_PAD_EIM_D25__GPIO3_25 0x140 0x488 0x000 0x1 0x0 +#define MX53_PAD_EIM_D25__UART3_RXD_MUX 0x140 0x488 0x888 0x2 0x1 +#define MX53_PAD_EIM_D25__ECSPI1_SS3 0x140 0x488 0x7b4 0x3 0x1 +#define MX53_PAD_EIM_D25__CSPI_SS3 0x140 0x488 0x798 0x4 0x1 +#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC 0x140 0x488 0x750 0x5 0x1 +#define MX53_PAD_EIM_D25__ECSPI2_SS3 0x140 0x488 0x000 0x6 0x0 +#define MX53_PAD_EIM_D25__UART1_DSR 0x140 0x488 0x000 0x7 0x0 +#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x144 0x48c 0x000 0x0 0x0 +#define MX53_PAD_EIM_D26__GPIO3_26 0x144 0x48c 0x000 0x1 0x0 +#define MX53_PAD_EIM_D26__UART2_TXD_MUX 0x144 0x48c 0x000 0x2 0x0 +#define MX53_PAD_EIM_D26__FIRI_RXD 0x144 0x48c 0x80c 0x3 0x0 +#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 0x144 0x48c 0x000 0x4 0x0 +#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 0x144 0x48c 0x000 0x5 0x0 +#define MX53_PAD_EIM_D26__IPU_SISG_2 0x144 0x48c 0x000 0x6 0x0 +#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x144 0x48c 0x000 0x7 0x0 +#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x148 0x490 0x000 0x0 0x0 +#define MX53_PAD_EIM_D27__GPIO3_27 0x148 0x490 0x000 0x1 0x0 +#define MX53_PAD_EIM_D27__UART2_RXD_MUX 0x148 0x490 0x880 0x2 0x1 +#define MX53_PAD_EIM_D27__FIRI_TXD 0x148 0x490 0x000 0x3 0x0 +#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 0x148 0x490 0x000 0x4 0x0 +#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 0x148 0x490 0x000 0x5 0x0 +#define MX53_PAD_EIM_D27__IPU_SISG_3 0x148 0x490 0x000 0x6 0x0 +#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x148 0x490 0x000 0x7 0x0 +#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x14c 0x494 0x000 0x0 0x0 +#define MX53_PAD_EIM_D28__GPIO3_28 0x14c 0x494 0x000 0x1 0x0 +#define MX53_PAD_EIM_D28__UART2_CTS 0x14c 0x494 0x000 0x2 0x0 +#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO 0x14c 0x494 0x82c 0x3 0x1 +#define MX53_PAD_EIM_D28__CSPI_MOSI 0x14c 0x494 0x788 0x4 0x1 +#define MX53_PAD_EIM_D28__I2C1_SDA 0x14c 0x494 0x818 0x5 0x1 +#define MX53_PAD_EIM_D28__IPU_EXT_TRIG 0x14c 0x494 0x000 0x6 0x0 +#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 0x14c 0x494 0x000 0x7 0x0 +#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x150 0x498 0x000 0x0 0x0 +#define MX53_PAD_EIM_D29__GPIO3_29 0x150 0x498 0x000 0x1 0x0 +#define MX53_PAD_EIM_D29__UART2_RTS 0x150 0x498 0x87c 0x2 0x1 +#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS 0x150 0x498 0x000 0x3 0x0 +#define MX53_PAD_EIM_D29__CSPI_SS0 0x150 0x498 0x78c 0x4 0x2 +#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 0x150 0x498 0x000 0x5 0x0 +#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC 0x150 0x498 0x83c 0x6 0x0 +#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 0x150 0x498 0x000 0x7 0x0 +#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x154 0x49c 0x000 0x0 0x0 +#define MX53_PAD_EIM_D30__GPIO3_30 0x154 0x49c 0x000 0x1 0x0 +#define MX53_PAD_EIM_D30__UART3_CTS 0x154 0x49c 0x000 0x2 0x0 +#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 0x154 0x49c 0x000 0x3 0x0 +#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 0x154 0x49c 0x000 0x4 0x0 +#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x154 0x49c 0x000 0x5 0x0 +#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC 0x154 0x49c 0x8a0 0x6 0x0 +#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x154 0x49c 0x8a4 0x7 0x1 +#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x158 0x4a0 0x000 0x0 0x0 +#define MX53_PAD_EIM_D31__GPIO3_31 0x158 0x4a0 0x000 0x1 0x0 +#define MX53_PAD_EIM_D31__UART3_RTS 0x158 0x4a0 0x884 0x2 0x3 +#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 0x158 0x4a0 0x000 0x3 0x0 +#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 0x158 0x4a0 0x000 0x4 0x0 +#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x158 0x4a0 0x000 0x5 0x0 +#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR 0x158 0x4a0 0x000 0x6 0x0 +#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR 0x158 0x4a0 0x000 0x7 0x0 +#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 0x15c 0x4a8 0x000 0x0 0x0 +#define MX53_PAD_EIM_A24__GPIO5_4 0x15c 0x4a8 0x000 0x1 0x0 +#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x15c 0x4a8 0x000 0x2 0x0 +#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 0x15c 0x4a8 0x000 0x3 0x0 +#define MX53_PAD_EIM_A24__IPU_SISG_2 0x15c 0x4a8 0x000 0x6 0x0 +#define MX53_PAD_EIM_A24__USBPHY2_BVALID 0x15c 0x4a8 0x000 0x7 0x0 +#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 0x160 0x4ac 0x000 0x0 0x0 +#define MX53_PAD_EIM_A23__GPIO6_6 0x160 0x4ac 0x000 0x1 0x0 +#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x160 0x4ac 0x000 0x2 0x0 +#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 0x160 0x4ac 0x000 0x3 0x0 +#define MX53_PAD_EIM_A23__IPU_SISG_3 0x160 0x4ac 0x000 0x6 0x0 +#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION 0x160 0x4ac 0x000 0x7 0x0 +#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x164 0x4b0 0x000 0x0 0x0 +#define MX53_PAD_EIM_A22__GPIO2_16 0x164 0x4b0 0x000 0x1 0x0 +#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x164 0x4b0 0x000 0x2 0x0 +#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 0x164 0x4b0 0x000 0x3 0x0 +#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 0x164 0x4b0 0x000 0x7 0x0 +#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 0x168 0x4b4 0x000 0x0 0x0 +#define MX53_PAD_EIM_A21__GPIO2_17 0x168 0x4b4 0x000 0x1 0x0 +#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x168 0x4b4 0x000 0x2 0x0 +#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 0x168 0x4b4 0x000 0x3 0x0 +#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 0x168 0x4b4 0x000 0x7 0x0 +#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 0x16c 0x4b8 0x000 0x0 0x0 +#define MX53_PAD_EIM_A20__GPIO2_18 0x16c 0x4b8 0x000 0x1 0x0 +#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x16c 0x4b8 0x000 0x2 0x0 +#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 0x16c 0x4b8 0x000 0x3 0x0 +#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 0x16c 0x4b8 0x000 0x7 0x0 +#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 0x170 0x4bc 0x000 0x0 0x0 +#define MX53_PAD_EIM_A19__GPIO2_19 0x170 0x4bc 0x000 0x1 0x0 +#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x170 0x4bc 0x000 0x2 0x0 +#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 0x170 0x4bc 0x000 0x3 0x0 +#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 0x170 0x4bc 0x000 0x7 0x0 +#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 0x174 0x4c0 0x000 0x0 0x0 +#define MX53_PAD_EIM_A18__GPIO2_20 0x174 0x4c0 0x000 0x1 0x0 +#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x174 0x4c0 0x000 0x2 0x0 +#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 0x174 0x4c0 0x000 0x3 0x0 +#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 0x174 0x4c0 0x000 0x7 0x0 +#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 0x178 0x4c4 0x000 0x0 0x0 +#define MX53_PAD_EIM_A17__GPIO2_21 0x178 0x4c4 0x000 0x1 0x0 +#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x178 0x4c4 0x000 0x2 0x0 +#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 0x178 0x4c4 0x000 0x3 0x0 +#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 0x178 0x4c4 0x000 0x7 0x0 +#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 0x17c 0x4c8 0x000 0x0 0x0 +#define MX53_PAD_EIM_A16__GPIO2_22 0x17c 0x4c8 0x000 0x1 0x0 +#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x17c 0x4c8 0x000 0x2 0x0 +#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK 0x17c 0x4c8 0x000 0x3 0x0 +#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 0x17c 0x4c8 0x000 0x7 0x0 +#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 0x180 0x4cc 0x000 0x0 0x0 +#define MX53_PAD_EIM_CS0__GPIO2_23 0x180 0x4cc 0x000 0x1 0x0 +#define MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x180 0x4cc 0x7b8 0x2 0x2 +#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 0x180 0x4cc 0x000 0x3 0x0 +#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x184 0x4d0 0x000 0x0 0x0 +#define MX53_PAD_EIM_CS1__GPIO2_24 0x184 0x4d0 0x000 0x1 0x0 +#define MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x184 0x4d0 0x7c0 0x2 0x2 +#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x184 0x4d0 0x000 0x3 0x0 +#define MX53_PAD_EIM_OE__EMI_WEIM_OE 0x188 0x4d4 0x000 0x0 0x0 +#define MX53_PAD_EIM_OE__GPIO2_25 0x188 0x4d4 0x000 0x1 0x0 +#define MX53_PAD_EIM_OE__ECSPI2_MISO 0x188 0x4d4 0x7bc 0x2 0x2 +#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 0x188 0x4d4 0x000 0x3 0x0 +#define MX53_PAD_EIM_OE__USBPHY2_IDDIG 0x188 0x4d4 0x000 0x7 0x0 +#define MX53_PAD_EIM_RW__EMI_WEIM_RW 0x18c 0x4d8 0x000 0x0 0x0 +#define MX53_PAD_EIM_RW__GPIO2_26 0x18c 0x4d8 0x000 0x1 0x0 +#define MX53_PAD_EIM_RW__ECSPI2_SS0 0x18c 0x4d8 0x7c4 0x2 0x2 +#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 0x18c 0x4d8 0x000 0x3 0x0 +#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT 0x18c 0x4d8 0x000 0x7 0x0 +#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA 0x190 0x4dc 0x000 0x0 0x0 +#define MX53_PAD_EIM_LBA__GPIO2_27 0x190 0x4dc 0x000 0x1 0x0 +#define MX53_PAD_EIM_LBA__ECSPI2_SS1 0x190 0x4dc 0x7c8 0x2 0x1 +#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 0x190 0x4dc 0x000 0x3 0x0 +#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 0x190 0x4dc 0x000 0x7 0x0 +#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 0x194 0x4e4 0x000 0x0 0x0 +#define MX53_PAD_EIM_EB0__GPIO2_28 0x194 0x4e4 0x000 0x1 0x0 +#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x194 0x4e4 0x000 0x3 0x0 +#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 0x194 0x4e4 0x000 0x4 0x0 +#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY 0x194 0x4e4 0x810 0x5 0x0 +#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 0x194 0x4e4 0x000 0x7 0x0 +#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 0x198 0x4e8 0x000 0x0 0x0 +#define MX53_PAD_EIM_EB1__GPIO2_29 0x198 0x4e8 0x000 0x1 0x0 +#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x198 0x4e8 0x000 0x3 0x0 +#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 0x198 0x4e8 0x000 0x4 0x0 +#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 0x198 0x4e8 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x19c 0x4ec 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA0__GPIO3_0 0x19c 0x4ec 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x19c 0x4ec 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 0x19c 0x4ec 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 0x19c 0x4ec 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x1a0 0x4f0 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA1__GPIO3_1 0x1a0 0x4f0 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x1a0 0x4f0 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 0x1a0 0x4f0 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 0x1a0 0x4f0 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x1a4 0x4f4 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA2__GPIO3_2 0x1a4 0x4f4 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x1a4 0x4f4 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 0x1a4 0x4f4 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 0x1a4 0x4f4 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x1a8 0x4f8 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA3__GPIO3_3 0x1a8 0x4f8 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x1a8 0x4f8 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 0x1a8 0x4f8 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 0x1a8 0x4f8 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x1ac 0x4fc 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA4__GPIO3_4 0x1ac 0x4fc 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x1ac 0x4fc 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 0x1ac 0x4fc 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 0x1ac 0x4fc 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x1b0 0x500 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA5__GPIO3_5 0x1b0 0x500 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x1b0 0x500 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 0x1b0 0x500 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 0x1b0 0x500 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x1b4 0x504 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA6__GPIO3_6 0x1b4 0x504 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x1b4 0x504 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 0x1b4 0x504 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 0x1b4 0x504 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0x1b8 0x508 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA7__GPIO3_7 0x1b8 0x508 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x1b8 0x508 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 0x1b8 0x508 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 0x1b8 0x508 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 0x1bc 0x50c 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA8__GPIO3_8 0x1bc 0x50c 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x1bc 0x50c 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 0x1bc 0x50c 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 0x1bc 0x50c 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 0x1c0 0x510 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA9__GPIO3_9 0x1c0 0x510 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x1c0 0x510 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 0x1c0 0x510 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 0x1c0 0x510 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 0x1c4 0x514 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA10__GPIO3_10 0x1c4 0x514 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x1c4 0x514 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN 0x1c4 0x514 0x834 0x4 0x1 +#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 0x1c4 0x514 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 0x1c8 0x518 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA11__GPIO3_11 0x1c8 0x518 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x1c8 0x518 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC 0x1c8 0x518 0x838 0x4 0x1 +#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 0x1cc 0x51c 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA12__GPIO3_12 0x1cc 0x51c 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x1cc 0x51c 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC 0x1cc 0x51c 0x83c 0x4 0x1 +#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 0x1d0 0x520 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA13__GPIO3_13 0x1d0 0x520 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x1d0 0x520 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK 0x1d0 0x520 0x76c 0x4 0x1 +#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 0x1d4 0x524 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA14__GPIO3_14 0x1d4 0x524 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x1d4 0x524 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK 0x1d4 0x524 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 0x1d8 0x528 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA15__GPIO3_15 0x1d8 0x528 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x1d8 0x528 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x1d8 0x528 0x000 0x4 0x0 +#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x1dc 0x52c 0x000 0x0 0x0 +#define MX53_PAD_NANDF_WE_B__GPIO6_12 0x1dc 0x52c 0x000 0x1 0x0 +#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x1e0 0x530 0x000 0x0 0x0 +#define MX53_PAD_NANDF_RE_B__GPIO6_13 0x1e0 0x530 0x000 0x1 0x0 +#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT 0x1e4 0x534 0x000 0x0 0x0 +#define MX53_PAD_EIM_WAIT__GPIO5_0 0x1e4 0x534 0x000 0x1 0x0 +#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B 0x1e4 0x534 0x000 0x2 0x0 +#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 0x1ec 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x1ec 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 0x1f0 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x1f0 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 0x1f4 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x1f4 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 0x1f8 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x1f8 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 0x1fc 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x1fc 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 0x200 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x200 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 0x204 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x204 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 0x208 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x208 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 0x20c 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x20c 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 0x210 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x210 0x000 0x000 0x1 0x0 +#define MX53_PAD_GPIO_10__GPIO4_0 0x214 0x540 0x000 0x0 0x0 +#define MX53_PAD_GPIO_10__OSC32k_32K_OUT 0x214 0x540 0x000 0x1 0x0 +#define MX53_PAD_GPIO_11__GPIO4_1 0x218 0x544 0x000 0x0 0x0 +#define MX53_PAD_GPIO_12__GPIO4_2 0x21c 0x548 0x000 0x0 0x0 +#define MX53_PAD_GPIO_13__GPIO4_3 0x220 0x54c 0x000 0x0 0x0 +#define MX53_PAD_GPIO_14__GPIO4_4 0x224 0x550 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x228 0x5a0 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CLE__GPIO6_7 0x228 0x5a0 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 0x228 0x5a0 0x000 0x7 0x0 +#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x22c 0x5a4 0x000 0x0 0x0 +#define MX53_PAD_NANDF_ALE__GPIO6_8 0x22c 0x5a4 0x000 0x1 0x0 +#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 0x22c 0x5a4 0x000 0x7 0x0 +#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0x230 0x5a8 0x000 0x0 0x0 +#define MX53_PAD_NANDF_WP_B__GPIO6_9 0x230 0x5a8 0x000 0x1 0x0 +#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 0x230 0x5a8 0x000 0x7 0x0 +#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0x234 0x5ac 0x000 0x0 0x0 +#define MX53_PAD_NANDF_RB0__GPIO6_10 0x234 0x5ac 0x000 0x1 0x0 +#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 0x234 0x5ac 0x000 0x7 0x0 +#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x238 0x5b0 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CS0__GPIO6_11 0x238 0x5b0 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 0x238 0x5b0 0x000 0x7 0x0 +#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 0x23c 0x5b4 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CS1__GPIO6_14 0x23c 0x5b4 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CS1__MLB_MLBCLK 0x23c 0x5b4 0x858 0x6 0x0 +#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 0x23c 0x5b4 0x000 0x7 0x0 +#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 0x240 0x5b8 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CS2__GPIO6_15 0x240 0x5b8 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CS2__IPU_SISG_0 0x240 0x5b8 0x000 0x2 0x0 +#define MX53_PAD_NANDF_CS2__ESAI1_TX0 0x240 0x5b8 0x7e4 0x3 0x0 +#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE 0x240 0x5b8 0x000 0x4 0x0 +#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK 0x240 0x5b8 0x000 0x5 0x0 +#define MX53_PAD_NANDF_CS2__MLB_MLBSIG 0x240 0x5b8 0x860 0x6 0x0 +#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 0x240 0x5b8 0x000 0x7 0x0 +#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 0x244 0x5bc 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CS3__GPIO6_16 0x244 0x5bc 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CS3__IPU_SISG_1 0x244 0x5bc 0x000 0x2 0x0 +#define MX53_PAD_NANDF_CS3__ESAI1_TX1 0x244 0x5bc 0x7e8 0x3 0x0 +#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 0x244 0x5bc 0x000 0x4 0x0 +#define MX53_PAD_NANDF_CS3__MLB_MLBDAT 0x244 0x5bc 0x85c 0x6 0x0 +#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 0x244 0x5bc 0x000 0x7 0x0 +#define MX53_PAD_FEC_MDIO__FEC_MDIO 0x248 0x5c4 0x804 0x0 0x1 +#define MX53_PAD_FEC_MDIO__GPIO1_22 0x248 0x5c4 0x000 0x1 0x0 +#define MX53_PAD_FEC_MDIO__ESAI1_SCKR 0x248 0x5c4 0x7dc 0x2 0x0 +#define MX53_PAD_FEC_MDIO__FEC_COL 0x248 0x5c4 0x800 0x3 0x1 +#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 0x248 0x5c4 0x000 0x4 0x0 +#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 0x248 0x5c4 0x000 0x5 0x0 +#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 0x248 0x5c4 0x000 0x6 0x0 +#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x24c 0x5c8 0x000 0x0 0x0 +#define MX53_PAD_FEC_REF_CLK__GPIO1_23 0x24c 0x5c8 0x000 0x1 0x0 +#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR 0x24c 0x5c8 0x7cc 0x2 0x0 +#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 0x24c 0x5c8 0x000 0x5 0x0 +#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 0x24c 0x5c8 0x000 0x6 0x0 +#define MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x250 0x5cc 0x000 0x0 0x0 +#define MX53_PAD_FEC_RX_ER__GPIO1_24 0x250 0x5cc 0x000 0x1 0x0 +#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR 0x250 0x5cc 0x7d4 0x2 0x0 +#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK 0x250 0x5cc 0x808 0x3 0x1 +#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 0x250 0x5cc 0x000 0x4 0x0 +#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x254 0x5d0 0x000 0x0 0x0 +#define MX53_PAD_FEC_CRS_DV__GPIO1_25 0x254 0x5d0 0x000 0x1 0x0 +#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT 0x254 0x5d0 0x7e0 0x2 0x0 +#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x258 0x5d4 0x000 0x0 0x0 +#define MX53_PAD_FEC_RXD1__GPIO1_26 0x258 0x5d4 0x000 0x1 0x0 +#define MX53_PAD_FEC_RXD1__ESAI1_FST 0x258 0x5d4 0x7d0 0x2 0x0 +#define MX53_PAD_FEC_RXD1__MLB_MLBSIG 0x258 0x5d4 0x860 0x3 0x1 +#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 0x258 0x5d4 0x000 0x4 0x0 +#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x25c 0x5d8 0x000 0x0 0x0 +#define MX53_PAD_FEC_RXD0__GPIO1_27 0x25c 0x5d8 0x000 0x1 0x0 +#define MX53_PAD_FEC_RXD0__ESAI1_HCKT 0x25c 0x5d8 0x7d8 0x2 0x0 +#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT 0x25c 0x5d8 0x000 0x3 0x0 +#define MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x260 0x5dc 0x000 0x0 0x0 +#define MX53_PAD_FEC_TX_EN__GPIO1_28 0x260 0x5dc 0x000 0x1 0x0 +#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 0x260 0x5dc 0x7f0 0x2 0x0 +#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x264 0x5e0 0x000 0x0 0x0 +#define MX53_PAD_FEC_TXD1__GPIO1_29 0x264 0x5e0 0x000 0x1 0x0 +#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 0x264 0x5e0 0x7ec 0x2 0x0 +#define MX53_PAD_FEC_TXD1__MLB_MLBCLK 0x264 0x5e0 0x858 0x3 0x1 +#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK 0x264 0x5e0 0x000 0x4 0x0 +#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x268 0x5e4 0x000 0x0 0x0 +#define MX53_PAD_FEC_TXD0__GPIO1_30 0x268 0x5e4 0x000 0x1 0x0 +#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 0x268 0x5e4 0x7f4 0x2 0x0 +#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 0x268 0x5e4 0x000 0x7 0x0 +#define MX53_PAD_FEC_MDC__FEC_MDC 0x26c 0x5e8 0x000 0x0 0x0 +#define MX53_PAD_FEC_MDC__GPIO1_31 0x26c 0x5e8 0x000 0x1 0x0 +#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 0x26c 0x5e8 0x7f8 0x2 0x0 +#define MX53_PAD_FEC_MDC__MLB_MLBDAT 0x26c 0x5e8 0x85c 0x3 0x1 +#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG 0x26c 0x5e8 0x000 0x4 0x0 +#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 0x26c 0x5e8 0x000 0x7 0x0 +#define MX53_PAD_PATA_DIOW__PATA_DIOW 0x270 0x5f0 0x000 0x0 0x0 +#define MX53_PAD_PATA_DIOW__GPIO6_17 0x270 0x5f0 0x000 0x1 0x0 +#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x270 0x5f0 0x000 0x3 0x0 +#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 0x270 0x5f0 0x000 0x7 0x0 +#define MX53_PAD_PATA_DMACK__PATA_DMACK 0x274 0x5f4 0x000 0x0 0x0 +#define MX53_PAD_PATA_DMACK__GPIO6_18 0x274 0x5f4 0x000 0x1 0x0 +#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x274 0x5f4 0x878 0x3 0x3 +#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 0x274 0x5f4 0x000 0x7 0x0 +#define MX53_PAD_PATA_DMARQ__PATA_DMARQ 0x278 0x5f8 0x000 0x0 0x0 +#define MX53_PAD_PATA_DMARQ__GPIO7_0 0x278 0x5f8 0x000 0x1 0x0 +#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x278 0x5f8 0x000 0x3 0x0 +#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 0x278 0x5f8 0x000 0x5 0x0 +#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 0x278 0x5f8 0x000 0x7 0x0 +#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN 0x27c 0x5fc 0x000 0x0 0x0 +#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 0x27c 0x5fc 0x000 0x1 0x0 +#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x27c 0x5fc 0x880 0x3 0x3 +#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 0x27c 0x5fc 0x000 0x5 0x0 +#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 0x27c 0x5fc 0x000 0x7 0x0 +#define MX53_PAD_PATA_INTRQ__PATA_INTRQ 0x280 0x600 0x000 0x0 0x0 +#define MX53_PAD_PATA_INTRQ__GPIO7_2 0x280 0x600 0x000 0x1 0x0 +#define MX53_PAD_PATA_INTRQ__UART2_CTS 0x280 0x600 0x000 0x3 0x0 +#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x280 0x600 0x000 0x4 0x0 +#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 0x280 0x600 0x000 0x5 0x0 +#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 0x280 0x600 0x000 0x7 0x0 +#define MX53_PAD_PATA_DIOR__PATA_DIOR 0x284 0x604 0x000 0x0 0x0 +#define MX53_PAD_PATA_DIOR__GPIO7_3 0x284 0x604 0x000 0x1 0x0 +#define MX53_PAD_PATA_DIOR__UART2_RTS 0x284 0x604 0x87c 0x3 0x3 +#define MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x284 0x604 0x760 0x4 0x1 +#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 0x284 0x604 0x000 0x7 0x0 +#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B 0x288 0x608 0x000 0x0 0x0 +#define MX53_PAD_PATA_RESET_B__GPIO7_4 0x288 0x608 0x000 0x1 0x0 +#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x288 0x608 0x000 0x2 0x0 +#define MX53_PAD_PATA_RESET_B__UART1_CTS 0x288 0x608 0x000 0x3 0x0 +#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN 0x288 0x608 0x000 0x4 0x0 +#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 0x288 0x608 0x000 0x7 0x0 +#define MX53_PAD_PATA_IORDY__PATA_IORDY 0x28c 0x60c 0x000 0x0 0x0 +#define MX53_PAD_PATA_IORDY__GPIO7_5 0x28c 0x60c 0x000 0x1 0x0 +#define MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x28c 0x60c 0x000 0x2 0x0 +#define MX53_PAD_PATA_IORDY__UART1_RTS 0x28c 0x60c 0x874 0x3 0x3 +#define MX53_PAD_PATA_IORDY__CAN2_RXCAN 0x28c 0x60c 0x764 0x4 0x1 +#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 0x28c 0x60c 0x000 0x7 0x0 +#define MX53_PAD_PATA_DA_0__PATA_DA_0 0x290 0x610 0x000 0x0 0x0 +#define MX53_PAD_PATA_DA_0__GPIO7_6 0x290 0x610 0x000 0x1 0x0 +#define MX53_PAD_PATA_DA_0__ESDHC3_RST 0x290 0x610 0x000 0x2 0x0 +#define MX53_PAD_PATA_DA_0__OWIRE_LINE 0x290 0x610 0x864 0x4 0x0 +#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 0x290 0x610 0x000 0x7 0x0 +#define MX53_PAD_PATA_DA_1__PATA_DA_1 0x294 0x614 0x000 0x0 0x0 +#define MX53_PAD_PATA_DA_1__GPIO7_7 0x294 0x614 0x000 0x1 0x0 +#define MX53_PAD_PATA_DA_1__ESDHC4_CMD 0x294 0x614 0x000 0x2 0x0 +#define MX53_PAD_PATA_DA_1__UART3_CTS 0x294 0x614 0x000 0x4 0x0 +#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 0x294 0x614 0x000 0x7 0x0 +#define MX53_PAD_PATA_DA_2__PATA_DA_2 0x298 0x618 0x000 0x0 0x0 +#define MX53_PAD_PATA_DA_2__GPIO7_8 0x298 0x618 0x000 0x1 0x0 +#define MX53_PAD_PATA_DA_2__ESDHC4_CLK 0x298 0x618 0x000 0x2 0x0 +#define MX53_PAD_PATA_DA_2__UART3_RTS 0x298 0x618 0x884 0x4 0x5 +#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 0x298 0x618 0x000 0x7 0x0 +#define MX53_PAD_PATA_CS_0__PATA_CS_0 0x29c 0x61c 0x000 0x0 0x0 +#define MX53_PAD_PATA_CS_0__GPIO7_9 0x29c 0x61c 0x000 0x1 0x0 +#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x29c 0x61c 0x000 0x4 0x0 +#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 0x29c 0x61c 0x000 0x7 0x0 +#define MX53_PAD_PATA_CS_1__PATA_CS_1 0x2a0 0x620 0x000 0x0 0x0 +#define MX53_PAD_PATA_CS_1__GPIO7_10 0x2a0 0x620 0x000 0x1 0x0 +#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x2a0 0x620 0x888 0x4 0x3 +#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 0x2a0 0x620 0x000 0x7 0x0 +#define MX53_PAD_PATA_DATA0__PATA_DATA_0 0x2a4 0x628 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA0__GPIO2_0 0x2a4 0x628 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0x2a4 0x628 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x2a4 0x628 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 0x2a4 0x628 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 0x2a4 0x628 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 0x2a4 0x628 0x000 0x7 0x0 +#define MX53_PAD_PATA_DATA1__PATA_DATA_1 0x2a8 0x62c 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA1__GPIO2_1 0x2a8 0x62c 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0x2a8 0x62c 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x2a8 0x62c 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 0x2a8 0x62c 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 0x2a8 0x62c 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA2__PATA_DATA_2 0x2ac 0x630 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA2__GPIO2_2 0x2ac 0x630 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0x2ac 0x630 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x2ac 0x630 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 0x2ac 0x630 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 0x2ac 0x630 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA3__PATA_DATA_3 0x2b0 0x634 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA3__GPIO2_3 0x2b0 0x634 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0x2b0 0x634 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x2b0 0x634 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 0x2b0 0x634 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 0x2b0 0x634 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA4__PATA_DATA_4 0x2b4 0x638 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA4__GPIO2_4 0x2b4 0x638 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0x2b4 0x638 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 0x2b4 0x638 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 0x2b4 0x638 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 0x2b4 0x638 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA5__PATA_DATA_5 0x2b8 0x63c 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA5__GPIO2_5 0x2b8 0x63c 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0x2b8 0x63c 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 0x2b8 0x63c 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 0x2b8 0x63c 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 0x2b8 0x63c 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA6__PATA_DATA_6 0x2bc 0x640 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA6__GPIO2_6 0x2bc 0x640 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0x2bc 0x640 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 0x2bc 0x640 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 0x2bc 0x640 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 0x2bc 0x640 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA7__PATA_DATA_7 0x2c0 0x644 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA7__GPIO2_7 0x2c0 0x644 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0x2c0 0x644 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 0x2c0 0x644 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 0x2c0 0x644 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 0x2c0 0x644 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA8__PATA_DATA_8 0x2c4 0x648 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA8__GPIO2_8 0x2c4 0x648 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x2c4 0x648 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 0x2c4 0x648 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x2c4 0x648 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 0x2c4 0x648 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 0x2c4 0x648 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA9__PATA_DATA_9 0x2c8 0x64c 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA9__GPIO2_9 0x2c8 0x64c 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x2c8 0x64c 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 0x2c8 0x64c 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x2c8 0x64c 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 0x2c8 0x64c 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 0x2c8 0x64c 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA10__PATA_DATA_10 0x2cc 0x650 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA10__GPIO2_10 0x2cc 0x650 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x2cc 0x650 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 0x2cc 0x650 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x2cc 0x650 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 0x2cc 0x650 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 0x2cc 0x650 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA11__PATA_DATA_11 0x2d0 0x654 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA11__GPIO2_11 0x2d0 0x654 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x2d0 0x654 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 0x2d0 0x654 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x2d0 0x654 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 0x2d0 0x654 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 0x2d0 0x654 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA12__PATA_DATA_12 0x2d4 0x658 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA12__GPIO2_12 0x2d4 0x658 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 0x2d4 0x658 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 0x2d4 0x658 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 0x2d4 0x658 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 0x2d4 0x658 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 0x2d4 0x658 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA13__PATA_DATA_13 0x2d8 0x65c 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA13__GPIO2_13 0x2d8 0x65c 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 0x2d8 0x65c 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 0x2d8 0x65c 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 0x2d8 0x65c 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 0x2d8 0x65c 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 0x2d8 0x65c 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA14__PATA_DATA_14 0x2dc 0x660 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA14__GPIO2_14 0x2dc 0x660 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 0x2dc 0x660 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 0x2dc 0x660 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 0x2dc 0x660 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 0x2dc 0x660 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 0x2dc 0x660 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA15__PATA_DATA_15 0x2e0 0x664 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA15__GPIO2_15 0x2e0 0x664 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 0x2e0 0x664 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 0x2e0 0x664 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 0x2e0 0x664 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 0x2e0 0x664 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 0x2e0 0x664 0x000 0x6 0x0 +#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x2e4 0x66c 0x000 0x0 0x0 +#define MX53_PAD_SD1_DATA0__GPIO1_16 0x2e4 0x66c 0x000 0x1 0x0 +#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 0x2e4 0x66c 0x000 0x3 0x0 +#define MX53_PAD_SD1_DATA0__CSPI_MISO 0x2e4 0x66c 0x784 0x5 0x2 +#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP 0x2e4 0x66c 0x778 0x7 0x0 +#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x2e8 0x670 0x000 0x0 0x0 +#define MX53_PAD_SD1_DATA1__GPIO1_17 0x2e8 0x670 0x000 0x1 0x0 +#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 0x2e8 0x670 0x000 0x3 0x0 +#define MX53_PAD_SD1_DATA1__CSPI_SS0 0x2e8 0x670 0x78c 0x5 0x3 +#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP 0x2e8 0x670 0x77c 0x7 0x1 +#define MX53_PAD_SD1_CMD__ESDHC1_CMD 0x2ec 0x674 0x000 0x0 0x0 +#define MX53_PAD_SD1_CMD__GPIO1_18 0x2ec 0x674 0x000 0x1 0x0 +#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 0x2ec 0x674 0x000 0x3 0x0 +#define MX53_PAD_SD1_CMD__CSPI_MOSI 0x2ec 0x674 0x788 0x5 0x2 +#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP 0x2ec 0x674 0x770 0x7 0x0 +#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x2f0 0x678 0x000 0x0 0x0 +#define MX53_PAD_SD1_DATA2__GPIO1_19 0x2f0 0x678 0x000 0x1 0x0 +#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 0x2f0 0x678 0x000 0x2 0x0 +#define MX53_PAD_SD1_DATA2__PWM2_PWMO 0x2f0 0x678 0x000 0x3 0x0 +#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B 0x2f0 0x678 0x000 0x4 0x0 +#define MX53_PAD_SD1_DATA2__CSPI_SS1 0x2f0 0x678 0x790 0x5 0x2 +#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB 0x2f0 0x678 0x000 0x6 0x0 +#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP 0x2f0 0x678 0x774 0x7 0x0 +#define MX53_PAD_SD1_CLK__ESDHC1_CLK 0x2f4 0x67c 0x000 0x0 0x0 +#define MX53_PAD_SD1_CLK__GPIO1_20 0x2f4 0x67c 0x000 0x1 0x0 +#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT 0x2f4 0x67c 0x000 0x2 0x0 +#define MX53_PAD_SD1_CLK__GPT_CLKIN 0x2f4 0x67c 0x000 0x3 0x0 +#define MX53_PAD_SD1_CLK__CSPI_SCLK 0x2f4 0x67c 0x780 0x5 0x2 +#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 0x2f4 0x67c 0x000 0x7 0x0 +#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x2f8 0x680 0x000 0x0 0x0 +#define MX53_PAD_SD1_DATA3__GPIO1_21 0x2f8 0x680 0x000 0x1 0x0 +#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 0x2f8 0x680 0x000 0x2 0x0 +#define MX53_PAD_SD1_DATA3__PWM1_PWMO 0x2f8 0x680 0x000 0x3 0x0 +#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B 0x2f8 0x680 0x000 0x4 0x0 +#define MX53_PAD_SD1_DATA3__CSPI_SS2 0x2f8 0x680 0x794 0x5 0x2 +#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB 0x2f8 0x680 0x000 0x6 0x0 +#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 0x2f8 0x680 0x000 0x7 0x0 +#define MX53_PAD_SD2_CLK__ESDHC2_CLK 0x2fc 0x688 0x000 0x0 0x0 +#define MX53_PAD_SD2_CLK__GPIO1_10 0x2fc 0x688 0x000 0x1 0x0 +#define MX53_PAD_SD2_CLK__KPP_COL_5 0x2fc 0x688 0x840 0x2 0x2 +#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS 0x2fc 0x688 0x73c 0x3 0x1 +#define MX53_PAD_SD2_CLK__CSPI_SCLK 0x2fc 0x688 0x780 0x5 0x3 +#define MX53_PAD_SD2_CLK__SCC_RANDOM_V 0x2fc 0x688 0x000 0x7 0x0 +#define MX53_PAD_SD2_CMD__ESDHC2_CMD 0x300 0x68c 0x000 0x0 0x0 +#define MX53_PAD_SD2_CMD__GPIO1_11 0x300 0x68c 0x000 0x1 0x0 +#define MX53_PAD_SD2_CMD__KPP_ROW_5 0x300 0x68c 0x84c 0x2 0x1 +#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC 0x300 0x68c 0x738 0x3 0x1 +#define MX53_PAD_SD2_CMD__CSPI_MOSI 0x300 0x68c 0x788 0x5 0x3 +#define MX53_PAD_SD2_CMD__SCC_RANDOM 0x300 0x68c 0x000 0x7 0x0 +#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x304 0x690 0x000 0x0 0x0 +#define MX53_PAD_SD2_DATA3__GPIO1_12 0x304 0x690 0x000 0x1 0x0 +#define MX53_PAD_SD2_DATA3__KPP_COL_6 0x304 0x690 0x844 0x2 0x1 +#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x304 0x690 0x740 0x3 0x1 +#define MX53_PAD_SD2_DATA3__CSPI_SS2 0x304 0x690 0x794 0x5 0x3 +#define MX53_PAD_SD2_DATA3__SJC_DONE 0x304 0x690 0x000 0x7 0x0 +#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x308 0x694 0x000 0x0 0x0 +#define MX53_PAD_SD2_DATA2__GPIO1_13 0x308 0x694 0x000 0x1 0x0 +#define MX53_PAD_SD2_DATA2__KPP_ROW_6 0x308 0x694 0x850 0x2 0x1 +#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x308 0x694 0x734 0x3 0x1 +#define MX53_PAD_SD2_DATA2__CSPI_SS1 0x308 0x694 0x790 0x5 0x3 +#define MX53_PAD_SD2_DATA2__SJC_FAIL 0x308 0x694 0x000 0x7 0x0 +#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x30c 0x698 0x000 0x0 0x0 +#define MX53_PAD_SD2_DATA1__GPIO1_14 0x30c 0x698 0x000 0x1 0x0 +#define MX53_PAD_SD2_DATA1__KPP_COL_7 0x30c 0x698 0x848 0x2 0x1 +#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x30c 0x698 0x744 0x3 0x1 +#define MX53_PAD_SD2_DATA1__CSPI_SS0 0x30c 0x698 0x78c 0x5 0x4 +#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO 0x30c 0x698 0x000 0x7 0x0 +#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x310 0x69c 0x000 0x0 0x0 +#define MX53_PAD_SD2_DATA0__GPIO1_15 0x310 0x69c 0x000 0x1 0x0 +#define MX53_PAD_SD2_DATA0__KPP_ROW_7 0x310 0x69c 0x854 0x2 0x1 +#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x310 0x69c 0x730 0x3 0x1 +#define MX53_PAD_SD2_DATA0__CSPI_MISO 0x310 0x69c 0x784 0x5 0x3 +#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT 0x310 0x69c 0x000 0x7 0x0 +#define MX53_PAD_GPIO_0__CCM_CLKO 0x314 0x6a4 0x000 0x0 0x0 +#define MX53_PAD_GPIO_0__GPIO1_0 0x314 0x6a4 0x000 0x1 0x0 +#define MX53_PAD_GPIO_0__KPP_COL_5 0x314 0x6a4 0x840 0x2 0x3 +#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x314 0x6a4 0x000 0x3 0x0 +#define MX53_PAD_GPIO_0__EPIT1_EPITO 0x314 0x6a4 0x000 0x4 0x0 +#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB 0x314 0x6a4 0x000 0x5 0x0 +#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR 0x314 0x6a4 0x000 0x6 0x0 +#define MX53_PAD_GPIO_0__CSU_TD 0x314 0x6a4 0x000 0x7 0x0 +#define MX53_PAD_GPIO_1__ESAI1_SCKR 0x318 0x6a8 0x7dc 0x0 0x1 +#define MX53_PAD_GPIO_1__GPIO1_1 0x318 0x6a8 0x000 0x1 0x0 +#define MX53_PAD_GPIO_1__KPP_ROW_5 0x318 0x6a8 0x84c 0x2 0x2 +#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK 0x318 0x6a8 0x000 0x3 0x0 +#define MX53_PAD_GPIO_1__PWM2_PWMO 0x318 0x6a8 0x000 0x4 0x0 +#define MX53_PAD_GPIO_1__WDOG2_WDOG_B 0x318 0x6a8 0x000 0x5 0x0 +#define MX53_PAD_GPIO_1__ESDHC1_CD 0x318 0x6a8 0x000 0x6 0x0 +#define MX53_PAD_GPIO_1__SRC_TESTER_ACK 0x318 0x6a8 0x000 0x7 0x0 +#define MX53_PAD_GPIO_9__ESAI1_FSR 0x31c 0x6ac 0x7cc 0x0 0x1 +#define MX53_PAD_GPIO_9__GPIO1_9 0x31c 0x6ac 0x000 0x1 0x0 +#define MX53_PAD_GPIO_9__KPP_COL_6 0x31c 0x6ac 0x844 0x2 0x2 +#define MX53_PAD_GPIO_9__CCM_REF_EN_B 0x31c 0x6ac 0x000 0x3 0x0 +#define MX53_PAD_GPIO_9__PWM1_PWMO 0x31c 0x6ac 0x000 0x4 0x0 +#define MX53_PAD_GPIO_9__WDOG1_WDOG_B 0x31c 0x6ac 0x000 0x5 0x0 +#define MX53_PAD_GPIO_9__ESDHC1_WP 0x31c 0x6ac 0x7fc 0x6 0x1 +#define MX53_PAD_GPIO_9__SCC_FAIL_STATE 0x31c 0x6ac 0x000 0x7 0x0 +#define MX53_PAD_GPIO_3__ESAI1_HCKR 0x320 0x6b0 0x7d4 0x0 0x1 +#define MX53_PAD_GPIO_3__GPIO1_3 0x320 0x6b0 0x000 0x1 0x0 +#define MX53_PAD_GPIO_3__I2C3_SCL 0x320 0x6b0 0x824 0x2 0x1 +#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN 0x320 0x6b0 0x000 0x3 0x0 +#define MX53_PAD_GPIO_3__CCM_CLKO2 0x320 0x6b0 0x000 0x4 0x0 +#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 0x320 0x6b0 0x000 0x5 0x0 +#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x320 0x6b0 0x8a0 0x6 0x1 +#define MX53_PAD_GPIO_3__MLB_MLBCLK 0x320 0x6b0 0x858 0x7 0x2 +#define MX53_PAD_GPIO_6__ESAI1_SCKT 0x324 0x6b4 0x7e0 0x0 0x1 +#define MX53_PAD_GPIO_6__GPIO1_6 0x324 0x6b4 0x000 0x1 0x0 +#define MX53_PAD_GPIO_6__I2C3_SDA 0x324 0x6b4 0x828 0x2 0x1 +#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 0x324 0x6b4 0x000 0x3 0x0 +#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB 0x324 0x6b4 0x000 0x4 0x0 +#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 0x324 0x6b4 0x000 0x5 0x0 +#define MX53_PAD_GPIO_6__ESDHC2_LCTL 0x324 0x6b4 0x000 0x6 0x0 +#define MX53_PAD_GPIO_6__MLB_MLBSIG 0x324 0x6b4 0x860 0x7 0x2 +#define MX53_PAD_GPIO_2__ESAI1_FST 0x328 0x6b8 0x7d0 0x0 0x1 +#define MX53_PAD_GPIO_2__GPIO1_2 0x328 0x6b8 0x000 0x1 0x0 +#define MX53_PAD_GPIO_2__KPP_ROW_6 0x328 0x6b8 0x850 0x2 0x2 +#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 0x328 0x6b8 0x000 0x3 0x0 +#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 0x328 0x6b8 0x000 0x4 0x0 +#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 0x328 0x6b8 0x000 0x5 0x0 +#define MX53_PAD_GPIO_2__ESDHC2_WP 0x328 0x6b8 0x000 0x6 0x0 +#define MX53_PAD_GPIO_2__MLB_MLBDAT 0x328 0x6b8 0x85c 0x7 0x2 +#define MX53_PAD_GPIO_4__ESAI1_HCKT 0x32c 0x6bc 0x7d8 0x0 0x1 +#define MX53_PAD_GPIO_4__GPIO1_4 0x32c 0x6bc 0x000 0x1 0x0 +#define MX53_PAD_GPIO_4__KPP_COL_7 0x32c 0x6bc 0x848 0x2 0x2 +#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 0x32c 0x6bc 0x000 0x3 0x0 +#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 0x32c 0x6bc 0x000 0x4 0x0 +#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 0x32c 0x6bc 0x000 0x5 0x0 +#define MX53_PAD_GPIO_4__ESDHC2_CD 0x32c 0x6bc 0x000 0x6 0x0 +#define MX53_PAD_GPIO_4__SCC_SEC_STATE 0x32c 0x6bc 0x000 0x7 0x0 +#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 0x330 0x6c0 0x7ec 0x0 0x1 +#define MX53_PAD_GPIO_5__GPIO1_5 0x330 0x6c0 0x000 0x1 0x0 +#define MX53_PAD_GPIO_5__KPP_ROW_7 0x330 0x6c0 0x854 0x2 0x2 +#define MX53_PAD_GPIO_5__CCM_CLKO 0x330 0x6c0 0x000 0x3 0x0 +#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 0x330 0x6c0 0x000 0x4 0x0 +#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 0x330 0x6c0 0x000 0x5 0x0 +#define MX53_PAD_GPIO_5__I2C3_SCL 0x330 0x6c0 0x824 0x6 0x2 +#define MX53_PAD_GPIO_5__CCM_PLL1_BYP 0x330 0x6c0 0x770 0x7 0x1 +#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 0x334 0x6c4 0x7f4 0x0 0x1 +#define MX53_PAD_GPIO_7__GPIO1_7 0x334 0x6c4 0x000 0x1 0x0 +#define MX53_PAD_GPIO_7__EPIT1_EPITO 0x334 0x6c4 0x000 0x2 0x0 +#define MX53_PAD_GPIO_7__CAN1_TXCAN 0x334 0x6c4 0x000 0x3 0x0 +#define MX53_PAD_GPIO_7__UART2_TXD_MUX 0x334 0x6c4 0x000 0x4 0x0 +#define MX53_PAD_GPIO_7__FIRI_RXD 0x334 0x6c4 0x80c 0x5 0x1 +#define MX53_PAD_GPIO_7__SPDIF_PLOCK 0x334 0x6c4 0x000 0x6 0x0 +#define MX53_PAD_GPIO_7__CCM_PLL2_BYP 0x334 0x6c4 0x774 0x7 0x1 +#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 0x338 0x6c8 0x7f8 0x0 0x1 +#define MX53_PAD_GPIO_8__GPIO1_8 0x338 0x6c8 0x000 0x1 0x0 +#define MX53_PAD_GPIO_8__EPIT2_EPITO 0x338 0x6c8 0x000 0x2 0x0 +#define MX53_PAD_GPIO_8__CAN1_RXCAN 0x338 0x6c8 0x760 0x3 0x2 +#define MX53_PAD_GPIO_8__UART2_RXD_MUX 0x338 0x6c8 0x880 0x4 0x5 +#define MX53_PAD_GPIO_8__FIRI_TXD 0x338 0x6c8 0x000 0x5 0x0 +#define MX53_PAD_GPIO_8__SPDIF_SRCLK 0x338 0x6c8 0x000 0x6 0x0 +#define MX53_PAD_GPIO_8__CCM_PLL3_BYP 0x338 0x6c8 0x778 0x7 0x1 +#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 0x33c 0x6cc 0x7f0 0x0 0x1 +#define MX53_PAD_GPIO_16__GPIO7_11 0x33c 0x6cc 0x000 0x1 0x0 +#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT 0x33c 0x6cc 0x000 0x2 0x0 +#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 0x33c 0x6cc 0x000 0x4 0x0 +#define MX53_PAD_GPIO_16__SPDIF_IN1 0x33c 0x6cc 0x870 0x5 0x1 +#define MX53_PAD_GPIO_16__I2C3_SDA 0x33c 0x6cc 0x828 0x6 0x2 +#define MX53_PAD_GPIO_16__SJC_DE_B 0x33c 0x6cc 0x000 0x7 0x0 +#define MX53_PAD_GPIO_17__ESAI1_TX0 0x340 0x6d0 0x7e4 0x0 0x1 +#define MX53_PAD_GPIO_17__GPIO7_12 0x340 0x6d0 0x000 0x1 0x0 +#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 0x340 0x6d0 0x868 0x2 0x1 +#define MX53_PAD_GPIO_17__GPC_PMIC_RDY 0x340 0x6d0 0x810 0x3 0x1 +#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG 0x340 0x6d0 0x000 0x4 0x0 +#define MX53_PAD_GPIO_17__SPDIF_OUT1 0x340 0x6d0 0x000 0x5 0x0 +#define MX53_PAD_GPIO_17__IPU_SNOOP2 0x340 0x6d0 0x000 0x6 0x0 +#define MX53_PAD_GPIO_17__SJC_JTAG_ACT 0x340 0x6d0 0x000 0x7 0x0 +#define MX53_PAD_GPIO_18__ESAI1_TX1 0x344 0x6d4 0x7e8 0x0 0x1 +#define MX53_PAD_GPIO_18__GPIO7_13 0x344 0x6d4 0x000 0x1 0x0 +#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 0x344 0x6d4 0x86c 0x2 0x1 +#define MX53_PAD_GPIO_18__OWIRE_LINE 0x344 0x6d4 0x864 0x3 0x1 +#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG 0x344 0x6d4 0x000 0x4 0x0 +#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK 0x344 0x6d4 0x768 0x5 0x1 +#define MX53_PAD_GPIO_18__ESDHC1_LCTL 0x344 0x6d4 0x000 0x6 0x0 +#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST 0x344 0x6d4 0x000 0x7 0x0 + +#endif /* __DTS_IMX53_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 05cc5620436b..8f0e9ae0e3e6 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "Freescale i.MX53 Quick Start Board"; @@ -110,21 +110,21 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */ - 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */ - 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ - 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ - 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ - 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */ + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 + MX53_PAD_GPIO_8__GPIO1_8 0x80000000 + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 + MX53_PAD_EIM_DA11__GPIO3_11 0x80000000 + MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 + MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_GPIO_16__GPIO7_11 0x80000000 >; }; led_pin_gpio7_7: led_gpio7_7@0 { fsl,pins = < - 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 995554c324b8..a9b6e10de0a5 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "Freescale i.MX53 Smart Mobile Reference Design Board"; @@ -107,13 +107,13 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ - 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ - 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ - 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 + MX53_PAD_EIM_EB2__GPIO2_30 0x80000000 + MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 + MX53_PAD_EIM_D19__GPIO3_19 0x80000000 + MX53_PAD_KEY_ROW2__GPIO4_11 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 8278ec5ec222..38bed3ed7c1a 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -10,7 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "TQ TQMa53"; @@ -72,11 +72,11 @@ i2s { pinctrl_i2s_1: i2s-grp1 { fsl,pins = < - 1 0x10000 /* I2S_MCLK */ - 10 0x10000 /* I2S_SCLK */ - 17 0x10000 /* I2S_DOUT */ - 23 0x10000 /* I2S_LRCLK*/ - 30 0x10000 /* I2S_DIN */ + MX53_PAD_GPIO_19__GPIO4_5 0x10000 /* I2S_MCLK */ + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x10000 /* I2S_SCLK */ + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x10000 /* I2S_DOUT */ + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x10000 /* I2S_LRCLK */ + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x10000 /* I2S_DIN */ >; }; }; @@ -84,16 +84,16 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 610 0x10000 /* MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (VSYNC)*/ - 711 0x10000 /* MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (HSYNC)*/ - 873 0x10000 /* MX53_PAD_PATA_DA_1__GPIO7_7 (LCD_BLT_EN)*/ - 878 0x10000 /* MX53_PAD_PATA_DA_2__GPIO7_8 (LCD_RESET)*/ - 922 0x10000 /* MX53_PAD_PATA_DATA5__GPIO2_5 (LCD_POWER)*/ - 928 0x10000 /* MX53_PAD_PATA_DATA6__GPIO2_6 (PMIC_INT)*/ - 982 0x10000 /* MX53_PAD_PATA_DATA14__GPIO2_14 (CSI_RST)*/ - 989 0x10000 /* MX53_PAD_PATA_DATA15__GPIO2_15 (CSI_PWDN)*/ - 1069 0x10000 /* MX53_PAD_GPIO_0__GPIO1_0 (SYSTEM_DOWN)*/ - 1093 0x10000 /* MX53_PAD_GPIO_3__GPIO1_3 */ + MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x10000 /* VSYNC */ + MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x10000 /* HSYNC */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x10000 /* LCD_BLT_EN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x10000 /* LCD_RESET */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x10000 /* LCD_POWER */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x10000 /* PMIC_INT */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x10000 /* CSI_RST */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x10000 /* CSI_PWDN */ + MX53_PAD_GPIO_0__GPIO1_0 0x10000 /* SYSTEM_DOWN */ + MX53_PAD_GPIO_3__GPIO1_3 0x10000 >; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index d05aa215c7f9..845982eaac22 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -10,7 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "imx53-pinfunc.h" / { aliases { @@ -72,6 +73,9 @@ compatible = "fsl,imx53-ipu"; reg = <0x18000000 0x080000000>; interrupts = <11 10>; + clocks = <&clks 59>, <&clks 110>, <&clks 61>; + clock-names = "bus", "di0", "di1"; + resets = <&src 2>; }; aips@50000000 { /* AIPS1 */ @@ -242,6 +246,14 @@ status = "disabled"; }; + gpt: timer@53fa0000 { + compatible = "fsl,imx53-gpt", "fsl,imx31-gpt"; + reg = <0x53fa0000 0x4000>; + interrupts = <39>; + clocks = <&clks 36>, <&clks 41>; + clock-names = "ipg", "per"; + }; + iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; @@ -249,10 +261,10 @@ audmux { pinctrl_audmux_1: audmuxgrp-1 { fsl,pins = < - 10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */ - 17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */ - 23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */ - 30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */ + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 >; }; }; @@ -260,16 +272,16 @@ fec { pinctrl_fec_1: fecgrp-1 { fsl,pins = < - 820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */ - 779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */ - 786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */ - 791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */ - 796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */ - 799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */ - 804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */ - 808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */ - 811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */ - 816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */ + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 >; }; }; @@ -277,27 +289,27 @@ csi { pinctrl_csi_1: csigrp-1 { fsl,pins = < - 286 0x1d5 /* MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN */ - 291 0x1d5 /* MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC */ - 280 0x1d5 /* MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC */ - 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */ - 409 0x1d5 /* MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 */ - 402 0x1d5 /* MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 */ - 395 0x1d5 /* MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 */ - 388 0x1d5 /* MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 */ - 381 0x1d5 /* MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 */ - 374 0x1d5 /* MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 */ - 367 0x1d5 /* MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 */ - 360 0x1d5 /* MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 */ - 352 0x1d5 /* MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 */ - 344 0x1d5 /* MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 */ - 336 0x1d5 /* MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 */ - 328 0x1d5 /* MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 */ - 320 0x1d5 /* MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 */ - 312 0x1d5 /* MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 */ - 304 0x1d5 /* MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 */ - 296 0x1d5 /* MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 */ - 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */ + MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1d5 + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5 + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5 + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5 + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5 + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5 + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5 + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5 + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5 + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5 + MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x1d5 + MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x1d5 + MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x1d5 + MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x1d5 + MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x1d5 + MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x1d5 + MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x1d5 + MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x1d5 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 >; }; }; @@ -305,9 +317,9 @@ cspi { pinctrl_cspi_1: cspigrp-1 { fsl,pins = < - 998 0x1d5 /* MX53_PAD_SD1_DATA0__CSPI_MISO */ - 1008 0x1d5 /* MX53_PAD_SD1_CMD__CSPI_MOSI */ - 1022 0x1d5 /* MX53_PAD_SD1_CLK__CSPI_SCLK */ + MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5 + MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5 + MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5 >; }; }; @@ -315,9 +327,9 @@ ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { fsl,pins = < - 433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */ - 439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */ - 445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */ + MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 + MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 + MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 >; }; }; @@ -325,27 +337,27 @@ esdhc1 { pinctrl_esdhc1_1: esdhc1grp-1 { fsl,pins = < - 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ - 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ - 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ - 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ - 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ - 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 >; }; pinctrl_esdhc1_2: esdhc1grp-2 { fsl,pins = < - 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ - 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ - 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ - 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ - 941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */ - 948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */ - 955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */ - 962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */ - 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ - 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 >; }; }; @@ -353,12 +365,12 @@ esdhc2 { pinctrl_esdhc2_1: esdhc2grp-1 { fsl,pins = < - 1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */ - 1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */ - 1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */ - 1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */ - 1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */ - 1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */ + MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 + MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 + MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 + MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 + MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 + MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 >; }; }; @@ -366,16 +378,16 @@ esdhc3 { pinctrl_esdhc3_1: esdhc3grp-1 { fsl,pins = < - 943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */ - 950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */ - 957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */ - 964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */ - 893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */ - 900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */ - 906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */ - 912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */ - 857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */ - 863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */ + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 + MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 + MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 >; }; }; @@ -383,15 +395,15 @@ can1 { pinctrl_can1_1: can1grp-1 { fsl,pins = < - 847 0x80000000 /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */ - 853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */ + MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x80000000 + MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x80000000 >; }; pinctrl_can1_2: can1grp-2 { fsl,pins = < - 37 0x80000000 /* MX53_PAD_KEY_COL2__CAN1_TXCAN */ - 44 0x80000000 /* MX53_PAD_KEY_ROW2__CAN1_RXCAN */ + MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000 + MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000 >; }; }; @@ -399,8 +411,8 @@ can2 { pinctrl_can2_1: can2grp-1 { fsl,pins = < - 67 0x80000000 /* MX53_PAD_KEY_COL4__CAN2_TXCAN */ - 74 0x80000000 /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */ + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 + MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 >; }; }; @@ -408,8 +420,8 @@ i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = < - 333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */ - 341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */ + MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 + MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 >; }; }; @@ -417,8 +429,8 @@ i2c2 { pinctrl_i2c2_1: i2c2grp-1 { fsl,pins = < - 61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */ - 53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */ + MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 + MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 >; }; }; @@ -426,8 +438,8 @@ i2c3 { pinctrl_i2c3_1: i2c3grp-1 { fsl,pins = < - 1102 0xc0000000 /* MX53_PAD_GPIO_6__I2C3_SDA */ - 1130 0xc0000000 /* MX53_PAD_GPIO_5__I2C3_SCL */ + MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 + MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 >; }; }; @@ -435,7 +447,7 @@ owire { pinctrl_owire_1: owiregrp-1 { fsl,pins = < - 1166 0x80000000 /* MX53_PAD_GPIO_18__OWIRE_LINE */ + MX53_PAD_GPIO_18__OWIRE_LINE 0x80000000 >; }; }; @@ -443,15 +455,15 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - 346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */ - 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */ + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5 >; }; pinctrl_uart1_2: uart1grp-2 { fsl,pins = < - 828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */ - 832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */ + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5 >; }; }; @@ -459,8 +471,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - 841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */ - 836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */ + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 >; }; }; @@ -468,17 +480,17 @@ uart3 { pinctrl_uart3_1: uart3grp-1 { fsl,pins = < - 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ - 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ - 875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */ - 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */ + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 + MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5 >; }; pinctrl_uart3_2: uart3grp-2 { fsl,pins = < - 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ - 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 >; }; @@ -487,8 +499,8 @@ uart4 { pinctrl_uart4_1: uart4grp-1 { fsl,pins = < - 11 0x1c5 /* MX53_PAD_KEY_COL0__UART4_TXD_MUX */ - 18 0x1c5 /* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */ + MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5 + MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5 >; }; }; @@ -496,14 +508,46 @@ uart5 { pinctrl_uart5_1: uart5grp-1 { fsl,pins = < - 24 0x1c5 /* MX53_PAD_KEY_COL1__UART5_TXD_MUX */ - 31 0x1c5 /* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */ + MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5 + MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5 >; }; }; }; + gpr: iomuxc-gpr@53fa8000 { + compatible = "fsl,imx53-iomuxc-gpr", "syscon"; + reg = <0x53fa8000 0xc>; + }; + + ldb: ldb@53fa8008 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ldb"; + reg = <0x53fa8008 0x4>; + gpr = <&gpr>; + clocks = <&clks 122>, <&clks 120>, + <&clks 115>, <&clks 116>, + <&clks 123>, <&clks 85>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", + "di0", "di1"; + status = "disabled"; + + lvds-channel@0 { + reg = <0>; + crtcs = <&ipu 0>; + status = "disabled"; + }; + + lvds-channel@1 { + reg = <1>; + crtcs = <&ipu 1>; + status = "disabled"; + }; + }; + pwm1: pwm@53fb4000 { #pwm-cells = <2>; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; @@ -558,6 +602,12 @@ status = "disabled"; }; + src: src@53fd0000 { + compatible = "fsl,imx53-src", "fsl,imx51-src"; + reg = <0x53fd0000 0x4000>; + #reset-cells = <1>; + }; + clks: ccm@53fd4000{ compatible = "fsl,imx53-ccm"; reg = <0x53fd4000 0x4000>; diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h new file mode 100644 index 000000000000..9aab950ec269 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pinfunc.h @@ -0,0 +1,1085 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6DL_PINFUNC_H +#define __DTS_IMX6DL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6DL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x050 0x364 0x8fc 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT11__UART1_TX_DATA 0x050 0x364 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT11__GPIO5_IO29 0x050 0x364 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT11__ARM_TRACE08 0x050 0x364 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x054 0x368 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT12__EIM_DATA08 0x054 0x368 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT12__UART4_TX_DATA 0x054 0x368 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT12__UART4_RX_DATA 0x054 0x368 0x914 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT12__GPIO5_IO30 0x054 0x368 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT12__ARM_TRACE09 0x054 0x368 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x058 0x36c 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT13__EIM_DATA09 0x058 0x36c 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT13__UART4_RX_DATA 0x058 0x36c 0x914 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT13__UART4_TX_DATA 0x058 0x36c 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT13__GPIO5_IO31 0x058 0x36c 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT13__ARM_TRACE10 0x058 0x36c 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x05c 0x370 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT14__EIM_DATA10 0x05c 0x370 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT14__UART5_TX_DATA 0x05c 0x370 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT14__UART5_RX_DATA 0x05c 0x370 0x91c 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT14__GPIO6_IO00 0x05c 0x370 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT14__ARM_TRACE11 0x05c 0x370 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x060 0x374 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT15__EIM_DATA11 0x060 0x374 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT15__UART5_RX_DATA 0x060 0x374 0x91c 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT15__UART5_TX_DATA 0x060 0x374 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT15__GPIO6_IO01 0x060 0x374 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT15__ARM_TRACE12 0x060 0x374 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x064 0x378 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT16__EIM_DATA12 0x064 0x378 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT16__UART4_RTS_B 0x064 0x378 0x910 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT16__UART4_CTS_B 0x064 0x378 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT16__GPIO6_IO02 0x064 0x378 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT16__ARM_TRACE13 0x064 0x378 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x068 0x37c 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT17__EIM_DATA13 0x068 0x37c 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT17__UART4_CTS_B 0x068 0x37c 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT17__UART4_RTS_B 0x068 0x37c 0x910 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT17__GPIO6_IO03 0x068 0x37c 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT17__ARM_TRACE14 0x068 0x37c 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x06c 0x380 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT18__EIM_DATA14 0x06c 0x380 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT18__UART5_RTS_B 0x06c 0x380 0x918 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT18__UART5_CTS_B 0x06c 0x380 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT18__GPIO6_IO04 0x06c 0x380 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT18__ARM_TRACE15 0x06c 0x380 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x070 0x384 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT19__EIM_DATA15 0x070 0x384 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT19__UART5_CTS_B 0x070 0x384 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT19__UART5_RTS_B 0x070 0x384 0x918 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT19__GPIO6_IO05 0x070 0x384 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x074 0x388 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT4__EIM_DATA02 0x074 0x388 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x074 0x388 0x7d8 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT4__KEY_COL5 0x074 0x388 0x8c0 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT4__AUD3_TXC 0x074 0x388 0x000 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT4__GPIO5_IO22 0x074 0x388 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT4__ARM_TRACE01 0x074 0x388 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x078 0x38c 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT5__EIM_DATA03 0x078 0x38c 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x078 0x38c 0x7e0 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT5__KEY_ROW5 0x078 0x38c 0x8cc 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT5__AUD3_TXD 0x078 0x38c 0x000 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT5__GPIO5_IO23 0x078 0x38c 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT5__ARM_TRACE02 0x078 0x38c 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x07c 0x390 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT6__EIM_DATA04 0x07c 0x390 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT6__ECSPI1_MISO 0x07c 0x390 0x7dc 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT6__KEY_COL6 0x07c 0x390 0x8c4 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x07c 0x390 0x000 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT6__GPIO5_IO24 0x07c 0x390 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT6__ARM_TRACE03 0x07c 0x390 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x080 0x394 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT7__EIM_DATA05 0x080 0x394 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT7__ECSPI1_SS0 0x080 0x394 0x7e4 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT7__KEY_ROW6 0x080 0x394 0x8d0 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT7__AUD3_RXD 0x080 0x394 0x000 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT7__GPIO5_IO25 0x080 0x394 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT7__ARM_TRACE04 0x080 0x394 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x084 0x398 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT8__EIM_DATA06 0x084 0x398 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x084 0x398 0x7f4 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT8__KEY_COL7 0x084 0x398 0x8c8 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x084 0x398 0x86c 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT8__GPIO5_IO26 0x084 0x398 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT8__ARM_TRACE05 0x084 0x398 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x088 0x39c 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT9__EIM_DATA07 0x088 0x39c 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x088 0x39c 0x7fc 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT9__KEY_ROW7 0x088 0x39c 0x8d4 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x088 0x39c 0x868 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT9__GPIO5_IO27 0x088 0x39c 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT9__ARM_TRACE06 0x088 0x39c 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x08c 0x3a0 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DATA_EN__EIM_DATA00 0x08c 0x3a0 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x08c 0x3a0 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x08c 0x3a0 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x090 0x3a4 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_MCLK__CCM_CLKO1 0x090 0x3a4 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_MCLK__GPIO5_IO19 0x090 0x3a4 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x090 0x3a4 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x094 0x3a8 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x094 0x3a8 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x094 0x3a8 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x098 0x3ac 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_VSYNC__EIM_DATA01 0x098 0x3ac 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_VSYNC__GPIO5_IO21 0x098 0x3ac 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_VSYNC__ARM_TRACE00 0x098 0x3ac 0x000 0x7 0x0 +#define MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x09c 0x3b0 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_DISP_CLK__LCD_CLK 0x09c 0x3b0 0x000 0x1 0x0 +#define MX6DL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x09c 0x3b0 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_DISP_CLK__LCD_WR_RWN 0x09c 0x3b0 0x000 0x8 0x0 +#define MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x0a0 0x3b4 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_PIN15__LCD_ENABLE 0x0a0 0x3b4 0x000 0x1 0x0 +#define MX6DL_PAD_DI0_PIN15__AUD6_TXC 0x0a0 0x3b4 0x000 0x2 0x0 +#define MX6DL_PAD_DI0_PIN15__GPIO4_IO17 0x0a0 0x3b4 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_PIN15__LCD_RD_E 0x0a0 0x3b4 0x000 0x8 0x0 +#define MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x0a4 0x3b8 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_PIN2__LCD_HSYNC 0x0a4 0x3b8 0x8d8 0x1 0x0 +#define MX6DL_PAD_DI0_PIN2__AUD6_TXD 0x0a4 0x3b8 0x000 0x2 0x0 +#define MX6DL_PAD_DI0_PIN2__GPIO4_IO18 0x0a4 0x3b8 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_PIN2__LCD_RS 0x0a4 0x3b8 0x000 0x8 0x0 +#define MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x0a8 0x3bc 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_PIN3__LCD_VSYNC 0x0a8 0x3bc 0x000 0x1 0x0 +#define MX6DL_PAD_DI0_PIN3__AUD6_TXFS 0x0a8 0x3bc 0x000 0x2 0x0 +#define MX6DL_PAD_DI0_PIN3__GPIO4_IO19 0x0a8 0x3bc 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_PIN3__LCD_CS 0x0a8 0x3bc 0x000 0x8 0x0 +#define MX6DL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x0ac 0x3c0 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_PIN4__LCD_BUSY 0x0ac 0x3c0 0x8d8 0x1 0x1 +#define MX6DL_PAD_DI0_PIN4__AUD6_RXD 0x0ac 0x3c0 0x000 0x2 0x0 +#define MX6DL_PAD_DI0_PIN4__SD1_WP 0x0ac 0x3c0 0x92c 0x3 0x0 +#define MX6DL_PAD_DI0_PIN4__GPIO4_IO20 0x0ac 0x3c0 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_PIN4__LCD_RESET 0x0ac 0x3c0 0x000 0x8 0x0 +#define MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x0b0 0x3c4 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT0__LCD_DATA00 0x0b0 0x3c4 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x0b0 0x3c4 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT0__GPIO4_IO21 0x0b0 0x3c4 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x0b4 0x3c8 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT1__LCD_DATA01 0x0b4 0x3c8 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x0b4 0x3c8 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT1__GPIO4_IO22 0x0b4 0x3c8 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x0b8 0x3cc 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT10__LCD_DATA10 0x0b8 0x3cc 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT10__GPIO4_IO31 0x0b8 0x3cc 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x0bc 0x3d0 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT11__LCD_DATA11 0x0bc 0x3d0 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT11__GPIO5_IO05 0x0bc 0x3d0 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x0c0 0x3d4 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT12__LCD_DATA12 0x0c0 0x3d4 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT12__GPIO5_IO06 0x0c0 0x3d4 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x0c4 0x3d8 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT13__LCD_DATA13 0x0c4 0x3d8 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT13__AUD5_RXFS 0x0c4 0x3d8 0x7bc 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT13__GPIO5_IO07 0x0c4 0x3d8 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x0c8 0x3dc 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT14__LCD_DATA14 0x0c8 0x3dc 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT14__AUD5_RXC 0x0c8 0x3dc 0x7b8 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT14__GPIO5_IO08 0x0c8 0x3dc 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x0cc 0x3e0 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT15__LCD_DATA15 0x0cc 0x3e0 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT15__ECSPI1_SS1 0x0cc 0x3e0 0x7e8 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT15__ECSPI2_SS1 0x0cc 0x3e0 0x804 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT15__GPIO5_IO09 0x0cc 0x3e0 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x0d0 0x3e4 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT16__LCD_DATA16 0x0d0 0x3e4 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0d0 0x3e4 0x7fc 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT16__AUD5_TXC 0x0d0 0x3e4 0x7c0 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x0d0 0x3e4 0x8e8 0x4 0x0 +#define MX6DL_PAD_DISP0_DAT16__GPIO5_IO10 0x0d0 0x3e4 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x0d4 0x3e8 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT17__LCD_DATA17 0x0d4 0x3e8 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT17__ECSPI2_MISO 0x0d4 0x3e8 0x7f8 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT17__AUD5_TXD 0x0d4 0x3e8 0x7b4 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x0d4 0x3e8 0x8ec 0x4 0x0 +#define MX6DL_PAD_DISP0_DAT17__GPIO5_IO11 0x0d4 0x3e8 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x0d8 0x3ec 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT18__LCD_DATA18 0x0d8 0x3ec 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT18__ECSPI2_SS0 0x0d8 0x3ec 0x800 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT18__AUD5_TXFS 0x0d8 0x3ec 0x7c4 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT18__AUD4_RXFS 0x0d8 0x3ec 0x7a4 0x4 0x0 +#define MX6DL_PAD_DISP0_DAT18__GPIO5_IO12 0x0d8 0x3ec 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT18__EIM_CS2_B 0x0d8 0x3ec 0x000 0x7 0x0 +#define MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x0dc 0x3f0 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT19__LCD_DATA19 0x0dc 0x3f0 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0dc 0x3f0 0x7f4 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT19__AUD5_RXD 0x0dc 0x3f0 0x7b0 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT19__AUD4_RXC 0x0dc 0x3f0 0x7a0 0x4 0x0 +#define MX6DL_PAD_DISP0_DAT19__GPIO5_IO13 0x0dc 0x3f0 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT19__EIM_CS3_B 0x0dc 0x3f0 0x000 0x7 0x0 +#define MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x0e0 0x3f4 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT2__LCD_DATA02 0x0e0 0x3f4 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT2__ECSPI3_MISO 0x0e0 0x3f4 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT2__GPIO4_IO23 0x0e0 0x3f4 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x0e4 0x3f8 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT20__LCD_DATA20 0x0e4 0x3f8 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0e4 0x3f8 0x7d8 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT20__AUD4_TXC 0x0e4 0x3f8 0x7a8 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT20__GPIO5_IO14 0x0e4 0x3f8 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x0e8 0x3fc 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT21__LCD_DATA21 0x0e8 0x3fc 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0e8 0x3fc 0x7e0 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT21__AUD4_TXD 0x0e8 0x3fc 0x79c 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT21__GPIO5_IO15 0x0e8 0x3fc 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x0ec 0x400 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT22__LCD_DATA22 0x0ec 0x400 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT22__ECSPI1_MISO 0x0ec 0x400 0x7dc 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT22__AUD4_TXFS 0x0ec 0x400 0x7ac 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT22__GPIO5_IO16 0x0ec 0x400 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x0f0 0x404 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT23__LCD_DATA23 0x0f0 0x404 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT23__ECSPI1_SS0 0x0f0 0x404 0x7e4 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT23__AUD4_RXD 0x0f0 0x404 0x798 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT23__GPIO5_IO17 0x0f0 0x404 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x0f4 0x408 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT3__LCD_DATA03 0x0f4 0x408 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT3__ECSPI3_SS0 0x0f4 0x408 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT3__GPIO4_IO24 0x0f4 0x408 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x0f8 0x40c 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT4__LCD_DATA04 0x0f8 0x40c 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT4__ECSPI3_SS1 0x0f8 0x40c 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT4__GPIO4_IO25 0x0f8 0x40c 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x0fc 0x410 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT5__LCD_DATA05 0x0fc 0x410 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT5__ECSPI3_SS2 0x0fc 0x410 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT5__AUD6_RXFS 0x0fc 0x410 0x000 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT5__GPIO4_IO26 0x0fc 0x410 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100 0x414 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT6__LCD_DATA06 0x100 0x414 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT6__ECSPI3_SS3 0x100 0x414 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT6__AUD6_RXC 0x100 0x414 0x000 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT6__GPIO4_IO27 0x100 0x414 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x104 0x418 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT7__LCD_DATA07 0x104 0x418 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT7__ECSPI3_RDY 0x104 0x418 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT7__GPIO4_IO28 0x104 0x418 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x108 0x41c 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT8__LCD_DATA08 0x108 0x41c 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT8__PWM1_OUT 0x108 0x41c 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT8__WDOG1_B 0x108 0x41c 0x000 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT8__GPIO4_IO29 0x108 0x41c 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10c 0x420 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT9__LCD_DATA09 0x10c 0x420 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT9__PWM2_OUT 0x10c 0x420 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT9__WDOG2_B 0x10c 0x420 0x000 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT9__GPIO4_IO30 0x10c 0x420 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A16__EIM_ADDR16 0x110 0x4e0 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x110 0x4e0 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x110 0x4e0 0x8b8 0x2 0x0 +#define MX6DL_PAD_EIM_A16__GPIO2_IO22 0x110 0x4e0 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A16__SRC_BOOT_CFG16 0x110 0x4e0 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A16__EPDC_DATA00 0x110 0x4e0 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A17__EIM_ADDR17 0x114 0x4e4 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x114 0x4e4 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x114 0x4e4 0x890 0x2 0x0 +#define MX6DL_PAD_EIM_A17__GPIO2_IO21 0x114 0x4e4 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A17__SRC_BOOT_CFG17 0x114 0x4e4 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A17__EPDC_PWR_STAT 0x114 0x4e4 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A18__EIM_ADDR18 0x118 0x4e8 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x118 0x4e8 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A18__IPU1_CSI1_DATA13 0x118 0x4e8 0x894 0x2 0x0 +#define MX6DL_PAD_EIM_A18__GPIO2_IO20 0x118 0x4e8 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A18__SRC_BOOT_CFG18 0x118 0x4e8 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A18__EPDC_PWR_CTRL0 0x118 0x4e8 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A19__EIM_ADDR19 0x11c 0x4ec 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x11c 0x4ec 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A19__IPU1_CSI1_DATA14 0x11c 0x4ec 0x898 0x2 0x0 +#define MX6DL_PAD_EIM_A19__GPIO2_IO19 0x11c 0x4ec 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A19__SRC_BOOT_CFG19 0x11c 0x4ec 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A19__EPDC_PWR_CTRL1 0x11c 0x4ec 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A20__EIM_ADDR20 0x120 0x4f0 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x120 0x4f0 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A20__IPU1_CSI1_DATA15 0x120 0x4f0 0x89c 0x2 0x0 +#define MX6DL_PAD_EIM_A20__GPIO2_IO18 0x120 0x4f0 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A20__SRC_BOOT_CFG20 0x120 0x4f0 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A20__EPDC_PWR_CTRL2 0x120 0x4f0 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A21__EIM_ADDR21 0x124 0x4f4 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x124 0x4f4 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A21__IPU1_CSI1_DATA16 0x124 0x4f4 0x8a0 0x2 0x0 +#define MX6DL_PAD_EIM_A21__GPIO2_IO17 0x124 0x4f4 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A21__SRC_BOOT_CFG21 0x124 0x4f4 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A21__EPDC_GDCLK 0x124 0x4f4 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A22__EIM_ADDR22 0x128 0x4f8 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x128 0x4f8 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A22__IPU1_CSI1_DATA17 0x128 0x4f8 0x8a4 0x2 0x0 +#define MX6DL_PAD_EIM_A22__GPIO2_IO16 0x128 0x4f8 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A22__SRC_BOOT_CFG22 0x128 0x4f8 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A22__EPDC_GDSP 0x128 0x4f8 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A23__EIM_ADDR23 0x12c 0x4fc 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x12c 0x4fc 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A23__IPU1_CSI1_DATA18 0x12c 0x4fc 0x8a8 0x2 0x0 +#define MX6DL_PAD_EIM_A23__IPU1_SISG3 0x12c 0x4fc 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_A23__GPIO6_IO06 0x12c 0x4fc 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A23__SRC_BOOT_CFG23 0x12c 0x4fc 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A23__EPDC_GDOE 0x12c 0x4fc 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A24__EIM_ADDR24 0x130 0x500 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x130 0x500 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A24__IPU1_CSI1_DATA19 0x130 0x500 0x8ac 0x2 0x0 +#define MX6DL_PAD_EIM_A24__IPU1_SISG2 0x130 0x500 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_A24__GPIO5_IO04 0x130 0x500 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A24__SRC_BOOT_CFG24 0x130 0x500 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A24__EPDC_GDRL 0x130 0x500 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A25__EIM_ADDR25 0x134 0x504 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A25__ECSPI4_SS1 0x134 0x504 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A25__ECSPI2_RDY 0x134 0x504 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_A25__IPU1_DI1_PIN12 0x134 0x504 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x134 0x504 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_A25__GPIO5_IO02 0x134 0x504 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x134 0x504 0x85c 0x6 0x0 +#define MX6DL_PAD_EIM_A25__EPDC_DATA15 0x134 0x504 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A25__EIM_ACLK_FREERUN 0x134 0x504 0x000 0x9 0x0 +#define MX6DL_PAD_EIM_BCLK__EIM_BCLK 0x138 0x508 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x138 0x508 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_BCLK__GPIO6_IO31 0x138 0x508 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_BCLK__EPDC_SDCE9 0x138 0x508 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_CS0__EIM_CS0_B 0x13c 0x50c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x13c 0x50c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_CS0__ECSPI2_SCLK 0x13c 0x50c 0x7f4 0x2 0x2 +#define MX6DL_PAD_EIM_CS0__GPIO2_IO23 0x13c 0x50c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_CS0__EPDC_DATA06 0x13c 0x50c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_CS1__EIM_CS1_B 0x140 0x510 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x140 0x510 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_CS1__ECSPI2_MOSI 0x140 0x510 0x7fc 0x2 0x2 +#define MX6DL_PAD_EIM_CS1__GPIO2_IO24 0x140 0x510 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_CS1__EPDC_DATA08 0x140 0x510 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D16__EIM_DATA16 0x144 0x514 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x144 0x514 0x7d8 0x1 0x2 +#define MX6DL_PAD_EIM_D16__IPU1_DI0_PIN05 0x144 0x514 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x144 0x514 0x8a8 0x3 0x1 +#define MX6DL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x144 0x514 0x864 0x4 0x0 +#define MX6DL_PAD_EIM_D16__GPIO3_IO16 0x144 0x514 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D16__I2C2_SDA 0x144 0x514 0x874 0x6 0x0 +#define MX6DL_PAD_EIM_D16__EPDC_DATA10 0x144 0x514 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D17__EIM_DATA17 0x148 0x518 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x148 0x518 0x7dc 0x1 0x2 +#define MX6DL_PAD_EIM_D17__IPU1_DI0_PIN06 0x148 0x518 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0x148 0x518 0x8b8 0x3 0x1 +#define MX6DL_PAD_EIM_D17__DCIC1_OUT 0x148 0x518 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D17__GPIO3_IO17 0x148 0x518 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D17__I2C3_SCL 0x148 0x518 0x878 0x6 0x0 +#define MX6DL_PAD_EIM_D17__EPDC_VCOM0 0x148 0x518 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D18__EIM_DATA18 0x14c 0x51c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x14c 0x51c 0x7e0 0x1 0x2 +#define MX6DL_PAD_EIM_D18__IPU1_DI0_PIN07 0x14c 0x51c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x14c 0x51c 0x8a4 0x3 0x1 +#define MX6DL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x14c 0x51c 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D18__GPIO3_IO18 0x14c 0x51c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D18__I2C3_SDA 0x14c 0x51c 0x87c 0x6 0x0 +#define MX6DL_PAD_EIM_D18__EPDC_VCOM1 0x14c 0x51c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D19__EIM_DATA19 0x150 0x520 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D19__ECSPI1_SS1 0x150 0x520 0x7e8 0x1 0x1 +#define MX6DL_PAD_EIM_D19__IPU1_DI0_PIN08 0x150 0x520 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x150 0x520 0x8a0 0x3 0x1 +#define MX6DL_PAD_EIM_D19__UART1_CTS_B 0x150 0x520 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D19__UART1_RTS_B 0x150 0x520 0x8f8 0x4 0x0 +#define MX6DL_PAD_EIM_D19__GPIO3_IO19 0x150 0x520 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D19__EPIT1_OUT 0x150 0x520 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D19__EPDC_DATA12 0x150 0x520 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D20__EIM_DATA20 0x154 0x524 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D20__ECSPI4_SS0 0x154 0x524 0x808 0x1 0x0 +#define MX6DL_PAD_EIM_D20__IPU1_DI0_PIN16 0x154 0x524 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x154 0x524 0x89c 0x3 0x1 +#define MX6DL_PAD_EIM_D20__UART1_RTS_B 0x154 0x524 0x8f8 0x4 0x1 +#define MX6DL_PAD_EIM_D20__UART1_CTS_B 0x154 0x524 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D20__GPIO3_IO20 0x154 0x524 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D20__EPIT2_OUT 0x154 0x524 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D21__EIM_DATA21 0x158 0x528 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D21__ECSPI4_SCLK 0x158 0x528 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D21__IPU1_DI0_PIN17 0x158 0x528 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D21__IPU1_CSI1_DATA11 0x158 0x528 0x88c 0x3 0x0 +#define MX6DL_PAD_EIM_D21__USB_OTG_OC 0x158 0x528 0x920 0x4 0x0 +#define MX6DL_PAD_EIM_D21__GPIO3_IO21 0x158 0x528 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D21__I2C1_SCL 0x158 0x528 0x868 0x6 0x1 +#define MX6DL_PAD_EIM_D21__SPDIF_IN 0x158 0x528 0x8f0 0x7 0x0 +#define MX6DL_PAD_EIM_D22__EIM_DATA22 0x15c 0x52c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D22__ECSPI4_MISO 0x15c 0x52c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D22__IPU1_DI0_PIN01 0x15c 0x52c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D22__IPU1_CSI1_DATA10 0x15c 0x52c 0x888 0x3 0x0 +#define MX6DL_PAD_EIM_D22__USB_OTG_PWR 0x15c 0x52c 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D22__GPIO3_IO22 0x15c 0x52c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D22__SPDIF_OUT 0x15c 0x52c 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D22__EPDC_SDCE6 0x15c 0x52c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D23__EIM_DATA23 0x160 0x530 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x160 0x530 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D23__UART3_CTS_B 0x160 0x530 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D23__UART3_RTS_B 0x160 0x530 0x908 0x2 0x0 +#define MX6DL_PAD_EIM_D23__UART1_DCD_B 0x160 0x530 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_D23__IPU1_CSI1_DATA_EN 0x160 0x530 0x8b0 0x4 0x0 +#define MX6DL_PAD_EIM_D23__GPIO3_IO23 0x160 0x530 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN02 0x160 0x530 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN14 0x160 0x530 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D23__EPDC_DATA11 0x160 0x530 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D24__EIM_DATA24 0x164 0x534 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D24__ECSPI4_SS2 0x164 0x534 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x164 0x534 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D24__UART3_RX_DATA 0x164 0x534 0x90c 0x2 0x0 +#define MX6DL_PAD_EIM_D24__ECSPI1_SS2 0x164 0x534 0x7ec 0x3 0x0 +#define MX6DL_PAD_EIM_D24__ECSPI2_SS2 0x164 0x534 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D24__GPIO3_IO24 0x164 0x534 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D24__AUD5_RXFS 0x164 0x534 0x7bc 0x6 0x1 +#define MX6DL_PAD_EIM_D24__UART1_DTR_B 0x164 0x534 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D24__EPDC_SDCE7 0x164 0x534 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D25__EIM_DATA25 0x168 0x538 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D25__ECSPI4_SS3 0x168 0x538 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x168 0x538 0x90c 0x2 0x1 +#define MX6DL_PAD_EIM_D25__UART3_TX_DATA 0x168 0x538 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D25__ECSPI1_SS3 0x168 0x538 0x7f0 0x3 0x0 +#define MX6DL_PAD_EIM_D25__ECSPI2_SS3 0x168 0x538 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D25__GPIO3_IO25 0x168 0x538 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D25__AUD5_RXC 0x168 0x538 0x7b8 0x6 0x1 +#define MX6DL_PAD_EIM_D25__UART1_DSR_B 0x168 0x538 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D25__EPDC_SDCE8 0x168 0x538 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D26__EIM_DATA26 0x16c 0x53c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_DI1_PIN11 0x16c 0x53c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x16c 0x53c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x16c 0x53c 0x898 0x3 0x1 +#define MX6DL_PAD_EIM_D26__UART2_TX_DATA 0x16c 0x53c 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D26__UART2_RX_DATA 0x16c 0x53c 0x904 0x4 0x0 +#define MX6DL_PAD_EIM_D26__GPIO3_IO26 0x16c 0x53c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_SISG2 0x16c 0x53c 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x16c 0x53c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D26__EPDC_SDOED 0x16c 0x53c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D27__EIM_DATA27 0x170 0x540 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_DI1_PIN13 0x170 0x540 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x170 0x540 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x170 0x540 0x894 0x3 0x1 +#define MX6DL_PAD_EIM_D27__UART2_RX_DATA 0x170 0x540 0x904 0x4 0x1 +#define MX6DL_PAD_EIM_D27__UART2_TX_DATA 0x170 0x540 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D27__GPIO3_IO27 0x170 0x540 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_SISG3 0x170 0x540 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x170 0x540 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D27__EPDC_SDOE 0x170 0x540 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D28__EIM_DATA28 0x174 0x544 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D28__I2C1_SDA 0x174 0x544 0x86c 0x1 0x1 +#define MX6DL_PAD_EIM_D28__ECSPI4_MOSI 0x174 0x544 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D28__IPU1_CSI1_DATA12 0x174 0x544 0x890 0x3 0x1 +#define MX6DL_PAD_EIM_D28__UART2_CTS_B 0x174 0x544 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D28__UART2_RTS_B 0x174 0x544 0x900 0x4 0x0 +#define MX6DL_PAD_EIM_D28__GPIO3_IO28 0x174 0x544 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D28__IPU1_EXT_TRIG 0x174 0x544 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D28__IPU1_DI0_PIN13 0x174 0x544 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D28__EPDC_PWR_CTRL3 0x174 0x544 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D29__EIM_DATA29 0x178 0x548 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D29__IPU1_DI1_PIN15 0x178 0x548 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D29__ECSPI4_SS0 0x178 0x548 0x808 0x2 0x1 +#define MX6DL_PAD_EIM_D29__UART2_RTS_B 0x178 0x548 0x900 0x4 0x1 +#define MX6DL_PAD_EIM_D29__UART2_CTS_B 0x178 0x548 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D29__GPIO3_IO29 0x178 0x548 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x178 0x548 0x8bc 0x6 0x0 +#define MX6DL_PAD_EIM_D29__IPU1_DI0_PIN14 0x178 0x548 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D29__EPDC_PWR_WAKE 0x178 0x548 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D30__EIM_DATA30 0x17c 0x54c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x17c 0x54c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D30__IPU1_DI0_PIN11 0x17c 0x54c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x17c 0x54c 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_D30__UART3_CTS_B 0x17c 0x54c 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D30__UART3_RTS_B 0x17c 0x54c 0x908 0x4 0x1 +#define MX6DL_PAD_EIM_D30__GPIO3_IO30 0x17c 0x54c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D30__USB_H1_OC 0x17c 0x54c 0x924 0x6 0x0 +#define MX6DL_PAD_EIM_D30__EPDC_SDOEZ 0x17c 0x54c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D31__EIM_DATA31 0x180 0x550 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x180 0x550 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D31__IPU1_DI0_PIN12 0x180 0x550 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x180 0x550 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_D31__UART3_RTS_B 0x180 0x550 0x908 0x4 0x2 +#define MX6DL_PAD_EIM_D31__UART3_CTS_B 0x180 0x550 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D31__GPIO3_IO31 0x180 0x550 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D31__USB_H1_PWR 0x180 0x550 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D31__EPDC_SDCLK_P 0x180 0x550 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D31__EIM_ACLK_FREERUN 0x180 0x550 0x000 0x9 0x0 +#define MX6DL_PAD_EIM_DA0__EIM_AD00 0x184 0x554 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x184 0x554 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA0__IPU1_CSI1_DATA09 0x184 0x554 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA0__GPIO3_IO00 0x184 0x554 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x184 0x554 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA0__EPDC_SDCLK_N 0x184 0x554 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA1__EIM_AD01 0x188 0x558 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x188 0x558 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA1__IPU1_CSI1_DATA08 0x188 0x558 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA1__GPIO3_IO01 0x188 0x558 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x188 0x558 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA1__EPDC_SDLE 0x188 0x558 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA10__EIM_AD10 0x18c 0x55c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x18c 0x55c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN 0x18c 0x55c 0x8b0 0x2 0x1 +#define MX6DL_PAD_EIM_DA10__GPIO3_IO10 0x18c 0x55c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x18c 0x55c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA10__EPDC_DATA01 0x18c 0x55c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA11__EIM_AD11 0x190 0x560 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x190 0x560 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA11__IPU1_CSI1_HSYNC 0x190 0x560 0x8b4 0x2 0x0 +#define MX6DL_PAD_EIM_DA11__GPIO3_IO11 0x190 0x560 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x190 0x560 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA11__EPDC_DATA03 0x190 0x560 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA12__EIM_AD12 0x194 0x564 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x194 0x564 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA12__IPU1_CSI1_VSYNC 0x194 0x564 0x8bc 0x2 0x1 +#define MX6DL_PAD_EIM_DA12__GPIO3_IO12 0x194 0x564 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x194 0x564 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA12__EPDC_DATA02 0x194 0x564 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA13__EIM_AD13 0x198 0x568 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x198 0x568 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA13__GPIO3_IO13 0x198 0x568 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x198 0x568 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA13__EPDC_DATA13 0x198 0x568 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA14__EIM_AD14 0x19c 0x56c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x19c 0x56c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA14__GPIO3_IO14 0x19c 0x56c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x19c 0x56c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA14__EPDC_DATA14 0x19c 0x56c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA15__EIM_AD15 0x1a0 0x570 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x1a0 0x570 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x1a0 0x570 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA15__GPIO3_IO15 0x1a0 0x570 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x1a0 0x570 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA15__EPDC_DATA09 0x1a0 0x570 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA2__EIM_AD02 0x1a4 0x574 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x1a4 0x574 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA2__IPU1_CSI1_DATA07 0x1a4 0x574 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA2__GPIO3_IO02 0x1a4 0x574 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x1a4 0x574 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA2__EPDC_BDR0 0x1a4 0x574 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA3__EIM_AD03 0x1a8 0x578 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x1a8 0x578 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA3__IPU1_CSI1_DATA06 0x1a8 0x578 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA3__GPIO3_IO03 0x1a8 0x578 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x1a8 0x578 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA3__EPDC_BDR1 0x1a8 0x578 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA4__EIM_AD04 0x1ac 0x57c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x1ac 0x57c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA4__IPU1_CSI1_DATA05 0x1ac 0x57c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA4__GPIO3_IO04 0x1ac 0x57c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x1ac 0x57c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA4__EPDC_SDCE0 0x1ac 0x57c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA5__EIM_AD05 0x1b0 0x580 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x1b0 0x580 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA5__IPU1_CSI1_DATA04 0x1b0 0x580 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA5__GPIO3_IO05 0x1b0 0x580 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x1b0 0x580 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA5__EPDC_SDCE1 0x1b0 0x580 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA6__EIM_AD06 0x1b4 0x584 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x1b4 0x584 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA6__IPU1_CSI1_DATA03 0x1b4 0x584 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA6__GPIO3_IO06 0x1b4 0x584 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x1b4 0x584 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA6__EPDC_SDCE2 0x1b4 0x584 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA7__EIM_AD07 0x1b8 0x588 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x1b8 0x588 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA7__IPU1_CSI1_DATA02 0x1b8 0x588 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA7__GPIO3_IO07 0x1b8 0x588 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x1b8 0x588 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA7__EPDC_SDCE3 0x1b8 0x588 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA8__EIM_AD08 0x1bc 0x58c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x1bc 0x58c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA8__IPU1_CSI1_DATA01 0x1bc 0x58c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA8__GPIO3_IO08 0x1bc 0x58c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x1bc 0x58c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA8__EPDC_SDCE4 0x1bc 0x58c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA9__EIM_AD09 0x1c0 0x590 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x1c0 0x590 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA9__IPU1_CSI1_DATA00 0x1c0 0x590 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA9__GPIO3_IO09 0x1c0 0x590 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x1c0 0x590 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA9__EPDC_SDCE5 0x1c0 0x590 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB0__EIM_EB0_B 0x1c4 0x594 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x1c4 0x594 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_EB0__IPU1_CSI1_DATA11 0x1c4 0x594 0x88c 0x2 0x1 +#define MX6DL_PAD_EIM_EB0__CCM_PMIC_READY 0x1c4 0x594 0x7d4 0x4 0x0 +#define MX6DL_PAD_EIM_EB0__GPIO2_IO28 0x1c4 0x594 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x1c4 0x594 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_EB0__EPDC_PWR_COM 0x1c4 0x594 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB1__EIM_EB1_B 0x1c8 0x598 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x1c8 0x598 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_EB1__IPU1_CSI1_DATA10 0x1c8 0x598 0x888 0x2 0x1 +#define MX6DL_PAD_EIM_EB1__GPIO2_IO29 0x1c8 0x598 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x1c8 0x598 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_EB1__EPDC_SDSHR 0x1c8 0x598 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB2__EIM_EB2_B 0x1cc 0x59c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_EB2__ECSPI1_SS0 0x1cc 0x59c 0x7e4 0x1 0x2 +#define MX6DL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1cc 0x59c 0x8ac 0x3 0x1 +#define MX6DL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x1cc 0x59c 0x860 0x4 0x0 +#define MX6DL_PAD_EIM_EB2__GPIO2_IO30 0x1cc 0x59c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_EB2__I2C2_SCL 0x1cc 0x59c 0x870 0x6 0x0 +#define MX6DL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x1cc 0x59c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_EB2__EPDC_DATA05 0x1cc 0x59c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB3__EIM_EB3_B 0x1d0 0x5a0 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_EB3__ECSPI4_RDY 0x1d0 0x5a0 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_EB3__UART3_RTS_B 0x1d0 0x5a0 0x908 0x2 0x3 +#define MX6DL_PAD_EIM_EB3__UART3_CTS_B 0x1d0 0x5a0 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_EB3__UART1_RI_B 0x1d0 0x5a0 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1d0 0x5a0 0x8b4 0x4 0x1 +#define MX6DL_PAD_EIM_EB3__GPIO2_IO31 0x1d0 0x5a0 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x1d0 0x5a0 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x1d0 0x5a0 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_EB3__EPDC_SDCE0 0x1d0 0x5a0 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB3__EIM_ACLK_FREERUN 0x1d0 0x5a0 0x000 0x9 0x0 +#define MX6DL_PAD_EIM_LBA__EIM_LBA_B 0x1d4 0x5a4 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x1d4 0x5a4 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_LBA__ECSPI2_SS1 0x1d4 0x5a4 0x804 0x2 0x1 +#define MX6DL_PAD_EIM_LBA__GPIO2_IO27 0x1d4 0x5a4 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x1d4 0x5a4 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_LBA__EPDC_DATA04 0x1d4 0x5a4 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_OE__EIM_OE_B 0x1d8 0x5a8 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_OE__IPU1_DI1_PIN07 0x1d8 0x5a8 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_OE__ECSPI2_MISO 0x1d8 0x5a8 0x7f8 0x2 0x2 +#define MX6DL_PAD_EIM_OE__GPIO2_IO25 0x1d8 0x5a8 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_OE__EPDC_PWR_IRQ 0x1d8 0x5a8 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_RW__EIM_RW 0x1dc 0x5ac 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_RW__IPU1_DI1_PIN08 0x1dc 0x5ac 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_RW__ECSPI2_SS0 0x1dc 0x5ac 0x800 0x2 0x2 +#define MX6DL_PAD_EIM_RW__GPIO2_IO26 0x1dc 0x5ac 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_RW__SRC_BOOT_CFG29 0x1dc 0x5ac 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_RW__EPDC_DATA07 0x1dc 0x5ac 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0x1e0 0x5b0 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_WAIT__EIM_DTACK_B 0x1e0 0x5b0 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_WAIT__GPIO5_IO00 0x1e0 0x5b0 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x1e0 0x5b0 0x000 0x7 0x0 +#define MX6DL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1e4 0x5b4 0x828 0x1 0x0 +#define MX6DL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1e4 0x5b4 0x840 0x2 0x0 +#define MX6DL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1e4 0x5b4 0x8f4 0x3 0x0 +#define MX6DL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1e4 0x5b4 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_MDC__MLB_DATA 0x1e8 0x5b8 0x8e0 0x0 0x0 +#define MX6DL_PAD_ENET_MDC__ENET_MDC 0x1e8 0x5b8 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1e8 0x5b8 0x858 0x2 0x0 +#define MX6DL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1e8 0x5b8 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_MDC__GPIO1_IO31 0x1e8 0x5b8 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_MDIO__ENET_MDIO 0x1ec 0x5bc 0x810 0x1 0x0 +#define MX6DL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1ec 0x5bc 0x83c 0x2 0x0 +#define MX6DL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1ec 0x5bc 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_MDIO__GPIO1_IO22 0x1ec 0x5bc 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_MDIO__SPDIF_LOCK 0x1ec 0x5bc 0x000 0x6 0x0 +#define MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1f0 0x5c0 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1f0 0x5c0 0x82c 0x2 0x0 +#define MX6DL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1f0 0x5c0 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1f0 0x5c0 0x000 0x6 0x0 +#define MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f4 0x5c4 0x790 0x0 0x0 +#define MX6DL_PAD_ENET_RX_ER__ENET_RX_ER 0x1f4 0x5c4 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1f4 0x5c4 0x834 0x2 0x0 +#define MX6DL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1 +#define MX6DL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0 +#define MX6DL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0 +#define MX6DL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0 +#define MX6DL_PAD_ENET_RXD0__GPIO1_IO27 0x1f8 0x5c8 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_RXD1__MLB_SIG 0x1fc 0x5cc 0x8e4 0x0 0x0 +#define MX6DL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1fc 0x5cc 0x81c 0x1 0x0 +#define MX6DL_PAD_ENET_RXD1__ESAI_TX_FS 0x1fc 0x5cc 0x830 0x2 0x0 +#define MX6DL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1fc 0x5cc 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_RXD1__GPIO1_IO26 0x1fc 0x5cc 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_TX_EN__ENET_TX_EN 0x200 0x5d0 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x200 0x5d0 0x850 0x2 0x0 +#define MX6DL_PAD_ENET_TX_EN__GPIO1_IO28 0x200 0x5d0 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_TX_EN__I2C4_SCL 0x200 0x5d0 0x880 0x9 0x0 +#define MX6DL_PAD_ENET_TXD0__ENET_TX_DATA0 0x204 0x5d4 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x204 0x5d4 0x854 0x2 0x0 +#define MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x204 0x5d4 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_TXD1__MLB_CLK 0x208 0x5d8 0x8dc 0x0 0x0 +#define MX6DL_PAD_ENET_TXD1__ENET_TX_DATA1 0x208 0x5d8 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x208 0x5d8 0x84c 0x2 0x0 +#define MX6DL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x208 0x5d8 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x208 0x5d8 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_TXD1__I2C4_SDA 0x208 0x5d8 0x884 0x9 0x0 +#define MX6DL_PAD_GPIO_0__CCM_CLKO1 0x20c 0x5dc 0x000 0x0 0x0 +#define MX6DL_PAD_GPIO_0__KEY_COL5 0x20c 0x5dc 0x8c0 0x2 0x1 +#define MX6DL_PAD_GPIO_0__ASRC_EXT_CLK 0x20c 0x5dc 0x794 0x3 0x0 +#define MX6DL_PAD_GPIO_0__EPIT1_OUT 0x20c 0x5dc 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_0__GPIO1_IO00 0x20c 0x5dc 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_0__USB_H1_PWR 0x20c 0x5dc 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_0__SNVS_VIO_5 0x20c 0x5dc 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_1__ESAI_RX_CLK 0x210 0x5e0 0x83c 0x0 0x1 +#define MX6DL_PAD_GPIO_1__WDOG2_B 0x210 0x5e0 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_1__KEY_ROW5 0x210 0x5e0 0x8cc 0x2 0x1 +#define MX6DL_PAD_GPIO_1__USB_OTG_ID 0x210 0x5e0 0x790 0x3 0x1 +#define MX6DL_PAD_GPIO_1__PWM2_OUT 0x210 0x5e0 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_1__GPIO1_IO01 0x210 0x5e0 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_1__SD1_CD_B 0x210 0x5e0 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_16__ESAI_TX3_RX2 0x214 0x5e4 0x850 0x0 0x1 +#define MX6DL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x214 0x5e4 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_16__ENET_REF_CLK 0x214 0x5e4 0x80c 0x2 0x0 +#define MX6DL_PAD_GPIO_16__SD1_LCTL 0x214 0x5e4 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_16__SPDIF_IN 0x214 0x5e4 0x8f0 0x4 0x2 +#define MX6DL_PAD_GPIO_16__GPIO7_IO11 0x214 0x5e4 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_16__I2C3_SDA 0x214 0x5e4 0x87c 0x6 0x1 +#define MX6DL_PAD_GPIO_16__JTAG_DE_B 0x214 0x5e4 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_17__ESAI_TX0 0x218 0x5e8 0x844 0x0 0x0 +#define MX6DL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x218 0x5e8 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_17__CCM_PMIC_READY 0x218 0x5e8 0x7d4 0x2 0x1 +#define MX6DL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x218 0x5e8 0x8e8 0x3 0x1 +#define MX6DL_PAD_GPIO_17__SPDIF_OUT 0x218 0x5e8 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_17__GPIO7_IO12 0x218 0x5e8 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_18__ESAI_TX1 0x21c 0x5ec 0x848 0x0 0x0 +#define MX6DL_PAD_GPIO_18__ENET_RX_CLK 0x21c 0x5ec 0x814 0x1 0x0 +#define MX6DL_PAD_GPIO_18__SD3_VSELECT 0x21c 0x5ec 0x000 0x2 0x0 +#define MX6DL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x21c 0x5ec 0x8ec 0x3 0x1 +#define MX6DL_PAD_GPIO_18__ASRC_EXT_CLK 0x21c 0x5ec 0x794 0x4 0x1 +#define MX6DL_PAD_GPIO_18__GPIO7_IO13 0x21c 0x5ec 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x21c 0x5ec 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_19__KEY_COL5 0x220 0x5f0 0x8c0 0x0 0x2 +#define MX6DL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x220 0x5f0 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_19__SPDIF_OUT 0x220 0x5f0 0x000 0x2 0x0 +#define MX6DL_PAD_GPIO_19__CCM_CLKO1 0x220 0x5f0 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_19__ECSPI1_RDY 0x220 0x5f0 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_19__GPIO4_IO05 0x220 0x5f0 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_19__ENET_TX_ER 0x220 0x5f0 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_2__ESAI_TX_FS 0x224 0x5f4 0x830 0x0 0x1 +#define MX6DL_PAD_GPIO_2__KEY_ROW6 0x224 0x5f4 0x8d0 0x2 0x1 +#define MX6DL_PAD_GPIO_2__GPIO1_IO02 0x224 0x5f4 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_2__SD2_WP 0x224 0x5f4 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_2__MLB_DATA 0x224 0x5f4 0x8e0 0x7 0x1 +#define MX6DL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x228 0x5f8 0x834 0x0 0x1 +#define MX6DL_PAD_GPIO_3__I2C3_SCL 0x228 0x5f8 0x878 0x2 0x1 +#define MX6DL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x228 0x5f8 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_3__CCM_CLKO2 0x228 0x5f8 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_3__GPIO1_IO03 0x228 0x5f8 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_3__USB_H1_OC 0x228 0x5f8 0x924 0x6 0x1 +#define MX6DL_PAD_GPIO_3__MLB_CLK 0x228 0x5f8 0x8dc 0x7 0x1 +#define MX6DL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x22c 0x5fc 0x838 0x0 0x1 +#define MX6DL_PAD_GPIO_4__KEY_COL7 0x22c 0x5fc 0x8c8 0x2 0x1 +#define MX6DL_PAD_GPIO_4__GPIO1_IO04 0x22c 0x5fc 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_4__SD2_CD_B 0x22c 0x5fc 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_5__ESAI_TX2_RX3 0x230 0x600 0x84c 0x0 0x1 +#define MX6DL_PAD_GPIO_5__KEY_ROW7 0x230 0x600 0x8d4 0x2 0x1 +#define MX6DL_PAD_GPIO_5__CCM_CLKO1 0x230 0x600 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_5__GPIO1_IO05 0x230 0x600 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_5__I2C3_SCL 0x230 0x600 0x878 0x6 0x2 +#define MX6DL_PAD_GPIO_5__ARM_EVENTI 0x230 0x600 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_6__ESAI_TX_CLK 0x234 0x604 0x840 0x0 0x1 +#define MX6DL_PAD_GPIO_6__I2C3_SDA 0x234 0x604 0x87c 0x2 0x2 +#define MX6DL_PAD_GPIO_6__GPIO1_IO06 0x234 0x604 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_6__SD2_LCTL 0x234 0x604 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_6__MLB_SIG 0x234 0x604 0x8e4 0x7 0x1 +#define MX6DL_PAD_GPIO_7__ESAI_TX4_RX1 0x238 0x608 0x854 0x0 0x1 +#define MX6DL_PAD_GPIO_7__EPIT1_OUT 0x238 0x608 0x000 0x2 0x0 +#define MX6DL_PAD_GPIO_7__FLEXCAN1_TX 0x238 0x608 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_7__UART2_TX_DATA 0x238 0x608 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_7__UART2_RX_DATA 0x238 0x608 0x904 0x4 0x2 +#define MX6DL_PAD_GPIO_7__GPIO1_IO07 0x238 0x608 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_7__SPDIF_LOCK 0x238 0x608 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x238 0x608 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_7__I2C4_SCL 0x238 0x608 0x880 0x8 0x1 +#define MX6DL_PAD_GPIO_8__ESAI_TX5_RX0 0x23c 0x60c 0x858 0x0 0x1 +#define MX6DL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x23c 0x60c 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_8__EPIT2_OUT 0x23c 0x60c 0x000 0x2 0x0 +#define MX6DL_PAD_GPIO_8__FLEXCAN1_RX 0x23c 0x60c 0x7c8 0x3 0x0 +#define MX6DL_PAD_GPIO_8__UART2_RX_DATA 0x23c 0x60c 0x904 0x4 0x3 +#define MX6DL_PAD_GPIO_8__UART2_TX_DATA 0x23c 0x60c 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_8__GPIO1_IO08 0x23c 0x60c 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_8__SPDIF_SR_CLK 0x23c 0x60c 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x23c 0x60c 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_8__I2C4_SDA 0x23c 0x60c 0x884 0x8 0x1 +#define MX6DL_PAD_GPIO_9__ESAI_RX_FS 0x240 0x610 0x82c 0x0 0x1 +#define MX6DL_PAD_GPIO_9__WDOG1_B 0x240 0x610 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_9__KEY_COL6 0x240 0x610 0x8c4 0x2 0x1 +#define MX6DL_PAD_GPIO_9__CCM_REF_EN_B 0x240 0x610 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_9__PWM1_OUT 0x240 0x610 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_9__GPIO1_IO09 0x240 0x610 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_9__SD1_WP 0x240 0x610 0x92c 0x6 0x1 +#define MX6DL_PAD_KEY_COL0__ECSPI1_SCLK 0x244 0x62c 0x7d8 0x0 0x3 +#define MX6DL_PAD_KEY_COL0__ENET_RX_DATA3 0x244 0x62c 0x824 0x1 0x0 +#define MX6DL_PAD_KEY_COL0__AUD5_TXC 0x244 0x62c 0x7c0 0x2 0x1 +#define MX6DL_PAD_KEY_COL0__KEY_COL0 0x244 0x62c 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x244 0x62c 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_COL0__UART4_RX_DATA 0x244 0x62c 0x914 0x4 0x2 +#define MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x244 0x62c 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_COL0__DCIC1_OUT 0x244 0x62c 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_COL1__ECSPI1_MISO 0x248 0x630 0x7dc 0x0 0x3 +#define MX6DL_PAD_KEY_COL1__ENET_MDIO 0x248 0x630 0x810 0x1 0x1 +#define MX6DL_PAD_KEY_COL1__AUD5_TXFS 0x248 0x630 0x7c4 0x2 0x1 +#define MX6DL_PAD_KEY_COL1__KEY_COL1 0x248 0x630 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x248 0x630 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_COL1__UART5_RX_DATA 0x248 0x630 0x91c 0x4 0x2 +#define MX6DL_PAD_KEY_COL1__GPIO4_IO08 0x248 0x630 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_COL1__SD1_VSELECT 0x248 0x630 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_COL2__ECSPI1_SS1 0x24c 0x634 0x7e8 0x0 0x2 +#define MX6DL_PAD_KEY_COL2__ENET_RX_DATA2 0x24c 0x634 0x820 0x1 0x0 +#define MX6DL_PAD_KEY_COL2__FLEXCAN1_TX 0x24c 0x634 0x000 0x2 0x0 +#define MX6DL_PAD_KEY_COL2__KEY_COL2 0x24c 0x634 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL2__ENET_MDC 0x24c 0x634 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_COL2__GPIO4_IO10 0x24c 0x634 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x24c 0x634 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_COL3__ECSPI1_SS3 0x250 0x638 0x7f0 0x0 0x1 +#define MX6DL_PAD_KEY_COL3__ENET_CRS 0x250 0x638 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x250 0x638 0x860 0x2 0x1 +#define MX6DL_PAD_KEY_COL3__KEY_COL3 0x250 0x638 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL3__I2C2_SCL 0x250 0x638 0x870 0x4 0x1 +#define MX6DL_PAD_KEY_COL3__GPIO4_IO12 0x250 0x638 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_COL3__SPDIF_IN 0x250 0x638 0x8f0 0x6 0x3 +#define MX6DL_PAD_KEY_COL4__FLEXCAN2_TX 0x254 0x63c 0x000 0x0 0x0 +#define MX6DL_PAD_KEY_COL4__IPU1_SISG4 0x254 0x63c 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_COL4__USB_OTG_OC 0x254 0x63c 0x920 0x2 0x1 +#define MX6DL_PAD_KEY_COL4__KEY_COL4 0x254 0x63c 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL4__UART5_RTS_B 0x254 0x63c 0x918 0x4 0x2 +#define MX6DL_PAD_KEY_COL4__UART5_CTS_B 0x254 0x63c 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_COL4__GPIO4_IO14 0x254 0x63c 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW0__ECSPI1_MOSI 0x258 0x640 0x7e0 0x0 0x3 +#define MX6DL_PAD_KEY_ROW0__ENET_TX_DATA3 0x258 0x640 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_ROW0__AUD5_TXD 0x258 0x640 0x7b4 0x2 0x1 +#define MX6DL_PAD_KEY_ROW0__KEY_ROW0 0x258 0x640 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x258 0x640 0x914 0x4 0x3 +#define MX6DL_PAD_KEY_ROW0__UART4_TX_DATA 0x258 0x640 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x258 0x640 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW0__DCIC2_OUT 0x258 0x640 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_ROW1__ECSPI1_SS0 0x25c 0x644 0x7e4 0x0 0x3 +#define MX6DL_PAD_KEY_ROW1__ENET_COL 0x25c 0x644 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_ROW1__AUD5_RXD 0x25c 0x644 0x7b0 0x2 0x1 +#define MX6DL_PAD_KEY_ROW1__KEY_ROW1 0x25c 0x644 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x25c 0x644 0x91c 0x4 0x3 +#define MX6DL_PAD_KEY_ROW1__UART5_TX_DATA 0x25c 0x644 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_ROW1__GPIO4_IO09 0x25c 0x644 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW1__SD2_VSELECT 0x25c 0x644 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_ROW2__ECSPI1_SS2 0x260 0x648 0x7ec 0x0 0x1 +#define MX6DL_PAD_KEY_ROW2__ENET_TX_DATA2 0x260 0x648 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x260 0x648 0x7c8 0x2 0x1 +#define MX6DL_PAD_KEY_ROW2__KEY_ROW2 0x260 0x648 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW2__SD2_VSELECT 0x260 0x648 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_ROW2__GPIO4_IO11 0x260 0x648 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x260 0x648 0x85c 0x6 0x1 +#define MX6DL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x264 0x64c 0x794 0x1 0x2 +#define MX6DL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x264 0x64c 0x864 0x2 0x1 +#define MX6DL_PAD_KEY_ROW3__KEY_ROW3 0x264 0x64c 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x264 0x64c 0x874 0x4 0x1 +#define MX6DL_PAD_KEY_ROW3__GPIO4_IO13 0x264 0x64c 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW3__SD1_VSELECT 0x264 0x64c 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_ROW4__FLEXCAN2_RX 0x268 0x650 0x7cc 0x0 0x0 +#define MX6DL_PAD_KEY_ROW4__IPU1_SISG5 0x268 0x650 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_ROW4__USB_OTG_PWR 0x268 0x650 0x000 0x2 0x0 +#define MX6DL_PAD_KEY_ROW4__KEY_ROW4 0x268 0x650 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW4__UART5_CTS_B 0x268 0x650 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_ROW4__UART5_RTS_B 0x268 0x650 0x918 0x4 0x3 +#define MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x268 0x650 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_ALE__NAND_ALE 0x26c 0x654 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_ALE__SD4_RESET 0x26c 0x654 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_ALE__GPIO6_IO08 0x26c 0x654 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CLE__NAND_CLE 0x270 0x658 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CLE__GPIO6_IO07 0x270 0x658 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0x274 0x65c 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CS0__GPIO6_IO11 0x274 0x65c 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0x278 0x660 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CS1__SD4_VSELECT 0x278 0x660 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_CS1__SD3_VSELECT 0x278 0x660 0x000 0x2 0x0 +#define MX6DL_PAD_NANDF_CS1__GPIO6_IO14 0x278 0x660 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0x27c 0x664 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CS2__IPU1_SISG0 0x27c 0x664 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_CS2__ESAI_TX0 0x27c 0x664 0x844 0x2 0x1 +#define MX6DL_PAD_NANDF_CS2__EIM_CRE 0x27c 0x664 0x000 0x3 0x0 +#define MX6DL_PAD_NANDF_CS2__CCM_CLKO2 0x27c 0x664 0x000 0x4 0x0 +#define MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x27c 0x664 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0x280 0x668 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CS3__IPU1_SISG1 0x280 0x668 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_CS3__ESAI_TX1 0x280 0x668 0x848 0x2 0x1 +#define MX6DL_PAD_NANDF_CS3__EIM_ADDR26 0x280 0x668 0x000 0x3 0x0 +#define MX6DL_PAD_NANDF_CS3__GPIO6_IO16 0x280 0x668 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS3__I2C4_SDA 0x280 0x668 0x884 0x9 0x2 +#define MX6DL_PAD_NANDF_D0__NAND_DATA00 0x284 0x66c 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D0__SD1_DATA4 0x284 0x66c 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x284 0x66c 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D1__NAND_DATA01 0x288 0x670 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D1__SD1_DATA5 0x288 0x670 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x288 0x670 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D2__NAND_DATA02 0x28c 0x674 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D2__SD1_DATA6 0x28c 0x674 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x28c 0x674 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D3__NAND_DATA03 0x290 0x678 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D3__SD1_DATA7 0x290 0x678 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x290 0x678 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D4__NAND_DATA04 0x294 0x67c 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D4__SD2_DATA4 0x294 0x67c 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D4__GPIO2_IO04 0x294 0x67c 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D5__NAND_DATA05 0x298 0x680 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D5__SD2_DATA5 0x298 0x680 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D5__GPIO2_IO05 0x298 0x680 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D6__NAND_DATA06 0x29c 0x684 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D6__SD2_DATA6 0x29c 0x684 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D6__GPIO2_IO06 0x29c 0x684 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D7__NAND_DATA07 0x2a0 0x688 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D7__SD2_DATA7 0x2a0 0x688 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D7__GPIO2_IO07 0x2a0 0x688 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_RB0__NAND_READY_B 0x2a4 0x68c 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_RB0__GPIO6_IO10 0x2a4 0x68c 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0x2a8 0x690 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_WP_B__GPIO6_IO09 0x2a8 0x690 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_WP_B__I2C4_SCL 0x2a8 0x690 0x880 0x9 0x2 +#define MX6DL_PAD_RGMII_RD0__HSI_RX_READY 0x2ac 0x694 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x2ac 0x694 0x818 0x1 0x1 +#define MX6DL_PAD_RGMII_RD0__GPIO6_IO25 0x2ac 0x694 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RD1__HSI_TX_FLAG 0x2b0 0x698 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x2b0 0x698 0x81c 0x1 0x1 +#define MX6DL_PAD_RGMII_RD1__GPIO6_IO27 0x2b0 0x698 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RD2__HSI_TX_DATA 0x2b4 0x69c 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x2b4 0x69c 0x820 0x1 0x1 +#define MX6DL_PAD_RGMII_RD2__GPIO6_IO28 0x2b4 0x69c 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RD3__HSI_TX_WAKE 0x2b8 0x6a0 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x2b8 0x6a0 0x824 0x1 0x1 +#define MX6DL_PAD_RGMII_RD3__GPIO6_IO29 0x2b8 0x6a0 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x2bc 0x6a4 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x2bc 0x6a4 0x828 0x1 0x1 +#define MX6DL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x2bc 0x6a4 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RXC__USB_H3_STROBE 0x2c0 0x6a8 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x2c0 0x6a8 0x814 0x1 0x1 +#define MX6DL_PAD_RGMII_RXC__GPIO6_IO30 0x2c0 0x6a8 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TD0__HSI_TX_READY 0x2c4 0x6ac 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x2c4 0x6ac 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TD0__GPIO6_IO20 0x2c4 0x6ac 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TD1__HSI_RX_FLAG 0x2c8 0x6b0 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x2c8 0x6b0 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TD1__GPIO6_IO21 0x2c8 0x6b0 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TD2__HSI_RX_DATA 0x2cc 0x6b4 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x2cc 0x6b4 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TD2__GPIO6_IO22 0x2cc 0x6b4 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TD3__HSI_RX_WAKE 0x2d0 0x6b8 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x2d0 0x6b8 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TD3__GPIO6_IO23 0x2d0 0x6b8 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x2d4 0x6bc 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x2d4 0x6bc 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x2d4 0x6bc 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x2d4 0x6bc 0x80c 0x7 0x1 +#define MX6DL_PAD_RGMII_TXC__USB_H2_DATA 0x2d8 0x6c0 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x2d8 0x6c0 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x2d8 0x6c0 0x8f4 0x2 0x1 +#define MX6DL_PAD_RGMII_TXC__GPIO6_IO19 0x2d8 0x6c0 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x2d8 0x6c0 0x000 0x7 0x0 +#define MX6DL_PAD_SD1_CLK__SD1_CLK 0x2dc 0x6c4 0x928 0x0 0x1 +#define MX6DL_PAD_SD1_CLK__GPT_CLKIN 0x2dc 0x6c4 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_CLK__GPIO1_IO20 0x2dc 0x6c4 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_CMD__SD1_CMD 0x2e0 0x6c8 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_CMD__PWM4_OUT 0x2e0 0x6c8 0x000 0x2 0x0 +#define MX6DL_PAD_SD1_CMD__GPT_COMPARE1 0x2e0 0x6c8 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_CMD__GPIO1_IO18 0x2e0 0x6c8 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT0__SD1_DATA0 0x2e4 0x6cc 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_DAT0__GPT_CAPTURE1 0x2e4 0x6cc 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_DAT0__GPIO1_IO16 0x2e4 0x6cc 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT1__SD1_DATA1 0x2e8 0x6d0 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_DAT1__PWM3_OUT 0x2e8 0x6d0 0x000 0x2 0x0 +#define MX6DL_PAD_SD1_DAT1__GPT_CAPTURE2 0x2e8 0x6d0 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_DAT1__GPIO1_IO17 0x2e8 0x6d0 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT2__SD1_DATA2 0x2ec 0x6d4 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_DAT2__GPT_COMPARE2 0x2ec 0x6d4 0x000 0x2 0x0 +#define MX6DL_PAD_SD1_DAT2__PWM2_OUT 0x2ec 0x6d4 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_DAT2__WDOG1_B 0x2ec 0x6d4 0x000 0x4 0x0 +#define MX6DL_PAD_SD1_DAT2__GPIO1_IO19 0x2ec 0x6d4 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x2ec 0x6d4 0x000 0x6 0x0 +#define MX6DL_PAD_SD1_DAT3__SD1_DATA3 0x2f0 0x6d8 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_DAT3__GPT_COMPARE3 0x2f0 0x6d8 0x000 0x2 0x0 +#define MX6DL_PAD_SD1_DAT3__PWM1_OUT 0x2f0 0x6d8 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_DAT3__WDOG2_B 0x2f0 0x6d8 0x000 0x4 0x0 +#define MX6DL_PAD_SD1_DAT3__GPIO1_IO21 0x2f0 0x6d8 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x2f0 0x6d8 0x000 0x6 0x0 +#define MX6DL_PAD_SD2_CLK__SD2_CLK 0x2f4 0x6dc 0x930 0x0 0x1 +#define MX6DL_PAD_SD2_CLK__KEY_COL5 0x2f4 0x6dc 0x8c0 0x2 0x3 +#define MX6DL_PAD_SD2_CLK__AUD4_RXFS 0x2f4 0x6dc 0x7a4 0x3 0x1 +#define MX6DL_PAD_SD2_CLK__GPIO1_IO10 0x2f4 0x6dc 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_CMD__SD2_CMD 0x2f8 0x6e0 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_CMD__KEY_ROW5 0x2f8 0x6e0 0x8cc 0x2 0x2 +#define MX6DL_PAD_SD2_CMD__AUD4_RXC 0x2f8 0x6e0 0x7a0 0x3 0x1 +#define MX6DL_PAD_SD2_CMD__GPIO1_IO11 0x2f8 0x6e0 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x2fc 0x6e4 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x2fc 0x6e4 0x798 0x3 0x1 +#define MX6DL_PAD_SD2_DAT0__KEY_ROW7 0x2fc 0x6e4 0x8d4 0x4 0x2 +#define MX6DL_PAD_SD2_DAT0__GPIO1_IO15 0x2fc 0x6e4 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_DAT0__DCIC2_OUT 0x2fc 0x6e4 0x000 0x6 0x0 +#define MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x300 0x6e8 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_DAT1__EIM_CS2_B 0x300 0x6e8 0x000 0x2 0x0 +#define MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x300 0x6e8 0x7ac 0x3 0x1 +#define MX6DL_PAD_SD2_DAT1__KEY_COL7 0x300 0x6e8 0x8c8 0x4 0x2 +#define MX6DL_PAD_SD2_DAT1__GPIO1_IO14 0x300 0x6e8 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x304 0x6ec 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_DAT2__EIM_CS3_B 0x304 0x6ec 0x000 0x2 0x0 +#define MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x304 0x6ec 0x79c 0x3 0x1 +#define MX6DL_PAD_SD2_DAT2__KEY_ROW6 0x304 0x6ec 0x8d0 0x4 0x2 +#define MX6DL_PAD_SD2_DAT2__GPIO1_IO13 0x304 0x6ec 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x308 0x6f0 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_DAT3__KEY_COL6 0x308 0x6f0 0x8c4 0x2 0x2 +#define MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x308 0x6f0 0x7a8 0x3 0x1 +#define MX6DL_PAD_SD2_DAT3__GPIO1_IO12 0x308 0x6f0 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_CLK__SD3_CLK 0x30c 0x6f4 0x934 0x0 0x1 +#define MX6DL_PAD_SD3_CLK__UART2_RTS_B 0x30c 0x6f4 0x900 0x1 0x2 +#define MX6DL_PAD_SD3_CLK__UART2_CTS_B 0x30c 0x6f4 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_CLK__FLEXCAN1_RX 0x30c 0x6f4 0x7c8 0x2 0x2 +#define MX6DL_PAD_SD3_CLK__GPIO7_IO03 0x30c 0x6f4 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_CMD__SD3_CMD 0x310 0x6f8 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_CMD__UART2_CTS_B 0x310 0x6f8 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_CMD__UART2_RTS_B 0x310 0x6f8 0x900 0x1 0x3 +#define MX6DL_PAD_SD3_CMD__FLEXCAN1_TX 0x310 0x6f8 0x000 0x2 0x0 +#define MX6DL_PAD_SD3_CMD__GPIO7_IO02 0x310 0x6f8 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x314 0x6fc 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT0__UART1_CTS_B 0x314 0x6fc 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT0__UART1_RTS_B 0x314 0x6fc 0x8f8 0x1 0x2 +#define MX6DL_PAD_SD3_DAT0__FLEXCAN2_TX 0x314 0x6fc 0x000 0x2 0x0 +#define MX6DL_PAD_SD3_DAT0__GPIO7_IO04 0x314 0x6fc 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x318 0x700 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT1__UART1_RTS_B 0x318 0x700 0x8f8 0x1 0x3 +#define MX6DL_PAD_SD3_DAT1__UART1_CTS_B 0x318 0x700 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT1__FLEXCAN2_RX 0x318 0x700 0x7cc 0x2 0x1 +#define MX6DL_PAD_SD3_DAT1__GPIO7_IO05 0x318 0x700 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x31c 0x704 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT2__GPIO7_IO06 0x31c 0x704 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x320 0x708 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT3__UART3_CTS_B 0x320 0x708 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT3__UART3_RTS_B 0x320 0x708 0x908 0x1 0x4 +#define MX6DL_PAD_SD3_DAT3__GPIO7_IO07 0x320 0x708 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x324 0x70c 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT4__UART2_RX_DATA 0x324 0x70c 0x904 0x1 0x4 +#define MX6DL_PAD_SD3_DAT4__UART2_TX_DATA 0x324 0x70c 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT4__GPIO7_IO01 0x324 0x70c 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x328 0x710 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT5__UART2_TX_DATA 0x328 0x710 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT5__UART2_RX_DATA 0x328 0x710 0x904 0x1 0x5 +#define MX6DL_PAD_SD3_DAT5__GPIO7_IO00 0x328 0x710 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x32c 0x714 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x32c 0x714 0x8fc 0x1 0x2 +#define MX6DL_PAD_SD3_DAT6__UART1_TX_DATA 0x32c 0x714 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT6__GPIO6_IO18 0x32c 0x714 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x330 0x718 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x330 0x718 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT7__UART1_RX_DATA 0x330 0x718 0x8fc 0x1 0x3 +#define MX6DL_PAD_SD3_DAT7__GPIO6_IO17 0x330 0x718 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_RST__SD3_RESET 0x334 0x71c 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_RST__UART3_RTS_B 0x334 0x71c 0x908 0x1 0x5 +#define MX6DL_PAD_SD3_RST__UART3_CTS_B 0x334 0x71c 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_RST__GPIO7_IO08 0x334 0x71c 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_CLK__SD4_CLK 0x338 0x720 0x938 0x0 0x1 +#define MX6DL_PAD_SD4_CLK__NAND_WE_B 0x338 0x720 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_CLK__UART3_RX_DATA 0x338 0x720 0x90c 0x2 0x2 +#define MX6DL_PAD_SD4_CLK__UART3_TX_DATA 0x338 0x720 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_CLK__GPIO7_IO10 0x338 0x720 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_CMD__SD4_CMD 0x33c 0x724 0x000 0x0 0x0 +#define MX6DL_PAD_SD4_CMD__NAND_RE_B 0x33c 0x724 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_CMD__UART3_TX_DATA 0x33c 0x724 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_CMD__UART3_RX_DATA 0x33c 0x724 0x90c 0x2 0x3 +#define MX6DL_PAD_SD4_CMD__GPIO7_IO09 0x33c 0x724 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT0__SD4_DATA0 0x340 0x728 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT0__NAND_DQS 0x340 0x728 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT0__GPIO2_IO08 0x340 0x728 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT1__SD4_DATA1 0x344 0x72c 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT1__PWM3_OUT 0x344 0x72c 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT1__GPIO2_IO09 0x344 0x72c 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT2__SD4_DATA2 0x348 0x730 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT2__PWM4_OUT 0x348 0x730 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT2__GPIO2_IO10 0x348 0x730 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT3__SD4_DATA3 0x34c 0x734 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT3__GPIO2_IO11 0x34c 0x734 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT4__SD4_DATA4 0x350 0x738 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x350 0x738 0x904 0x2 0x6 +#define MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x350 0x738 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT4__GPIO2_IO12 0x350 0x738 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT5__SD4_DATA5 0x354 0x73c 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT5__UART2_RTS_B 0x354 0x73c 0x900 0x2 0x4 +#define MX6DL_PAD_SD4_DAT5__UART2_CTS_B 0x354 0x73c 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT5__GPIO2_IO13 0x354 0x73c 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT6__SD4_DATA6 0x358 0x740 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT6__UART2_CTS_B 0x358 0x740 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT6__UART2_RTS_B 0x358 0x740 0x900 0x2 0x5 +#define MX6DL_PAD_SD4_DAT6__GPIO2_IO14 0x358 0x740 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT7__SD4_DATA7 0x35c 0x744 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x35c 0x744 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT7__UART2_RX_DATA 0x35c 0x744 0x904 0x2 0x7 +#define MX6DL_PAD_SD4_DAT7__GPIO2_IO15 0x35c 0x744 0x000 0x5 0x0 + +#endif /* __DTS_IMX6DL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts new file mode 100644 index 000000000000..7adcec360213 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sabreauto.dtsi" + +/ { + model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board"; + compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 + MX6DL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts new file mode 100644 index 000000000000..7efb05db4783 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-sabresd.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sabresd.dtsi" + +/ { + model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; + compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6DL_PAD_GPIO_4__GPIO1_IO04 0x80000000 + MX6DL_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 + MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 + MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 + MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts new file mode 100644 index 000000000000..bfc59c3566a4 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-wandboard.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" + +/ { + model = "Wandboard i.MX6 Dual Lite Board"; + compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 63fafe2a606c..5bcdf3a90bb3 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -1,3 +1,4 @@ + /* * Copyright 2013 Freescale Semiconductor, Inc. * @@ -7,7 +8,8 @@ * */ -/include/ "imx6qdl.dtsi" +#include "imx6qdl.dtsi" +#include "imx6dl-pinfunc.h" / { cpus { @@ -29,6 +31,127 @@ soc { aips1: aips-bus@02000000 { + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6dl-iomuxc"; + reg = <0x020e0000 0x4000>; + + enet { + pinctrl_enet_1: enetgrp-1 { + fsl,pins = < + MX6DL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6DL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6DL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_enet_2: enetgrp-2 { + fsl,pins = < + MX6DL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6DL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + }; + + uart4 { + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + }; + + usbotg { + pinctrl_usbotg_2: usbotggrp-2 { + fsl,pins = < + MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + }; + + usdhc2 { + pinctrl_usdhc2_1: usdhc2grp-1 { + fsl,pins = < + MX6DL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6DL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6DL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6DL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6DL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6DL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + }; + + usdhc3 { + pinctrl_usdhc3_1: usdhc3grp-1 { + fsl,pins = < + MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3_2: usdhc3grp_2 { + fsl,pins = < + MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; + + + }; + pxp: pxp@020f0000 { reg = <0x020f0000 0x4000>; interrupts = <0 98 0x04>; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 53eb241fa5ad..4e54fde591bd 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx6q.dtsi" +#include "imx6q.dtsi" / { model = "Freescale i.MX6 Quad Armadillo2 Board"; @@ -57,7 +57,7 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + MX6Q_PAD_EIM_D25__GPIO3_IO25 0x80000000 >; }; }; @@ -65,8 +65,8 @@ arm2 { pinctrl_usdhc3_arm2: usdhc3grp-arm2 { fsl,pins = < - 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ - 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ + MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 + MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h new file mode 100644 index 000000000000..faea6e1ada00 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -0,0 +1,1041 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6Q_PINFUNC_H +#define __DTS_IMX6Q_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0 +#define MX6Q_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0 +#define MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0 +#define MX6Q_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0 +#define MX6Q_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0 +#define MX6Q_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0 +#define MX6Q_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0 +#define MX6Q_PAD_SD2_DAT2__KEY_ROW6 0x050 0x364 0x8f8 0x4 0x0 +#define MX6Q_PAD_SD2_DAT2__GPIO1_IO13 0x050 0x364 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x054 0x368 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_DAT0__ECSPI5_MISO 0x054 0x368 0x82c 0x1 0x0 +#define MX6Q_PAD_SD2_DAT0__AUD4_RXD 0x054 0x368 0x7b4 0x3 0x0 +#define MX6Q_PAD_SD2_DAT0__KEY_ROW7 0x054 0x368 0x8fc 0x4 0x0 +#define MX6Q_PAD_SD2_DAT0__GPIO1_IO15 0x054 0x368 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_DAT0__DCIC2_OUT 0x054 0x368 0x000 0x6 0x0 +#define MX6Q_PAD_RGMII_TXC__USB_H2_DATA 0x058 0x36c 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x058 0x36c 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x058 0x36c 0x918 0x2 0x0 +#define MX6Q_PAD_RGMII_TXC__GPIO6_IO19 0x058 0x36c 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x058 0x36c 0x000 0x7 0x0 +#define MX6Q_PAD_RGMII_TD0__HSI_TX_READY 0x05c 0x370 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x05c 0x370 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TD0__GPIO6_IO20 0x05c 0x370 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TD1__HSI_RX_FLAG 0x060 0x374 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x060 0x374 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TD1__GPIO6_IO21 0x060 0x374 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TD2__HSI_RX_DATA 0x064 0x378 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x064 0x378 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TD2__GPIO6_IO22 0x064 0x378 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TD3__HSI_RX_WAKE 0x068 0x37c 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x068 0x37c 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TD3__GPIO6_IO23 0x068 0x37c 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RX_CTL__USB_H3_DATA 0x06c 0x380 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x06c 0x380 0x858 0x1 0x0 +#define MX6Q_PAD_RGMII_RX_CTL__GPIO6_IO24 0x06c 0x380 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RD0__HSI_RX_READY 0x070 0x384 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x070 0x384 0x848 0x1 0x0 +#define MX6Q_PAD_RGMII_RD0__GPIO6_IO25 0x070 0x384 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x074 0x388 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x074 0x388 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TX_CTL__GPIO6_IO26 0x074 0x388 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x074 0x388 0x83c 0x7 0x0 +#define MX6Q_PAD_RGMII_RD1__HSI_TX_FLAG 0x078 0x38c 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x078 0x38c 0x84c 0x1 0x0 +#define MX6Q_PAD_RGMII_RD1__GPIO6_IO27 0x078 0x38c 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RD2__HSI_TX_DATA 0x07c 0x390 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x07c 0x390 0x850 0x1 0x0 +#define MX6Q_PAD_RGMII_RD2__GPIO6_IO28 0x07c 0x390 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RD3__HSI_TX_WAKE 0x080 0x394 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x080 0x394 0x854 0x1 0x0 +#define MX6Q_PAD_RGMII_RD3__GPIO6_IO29 0x080 0x394 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RXC__USB_H3_STROBE 0x084 0x398 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x084 0x398 0x844 0x1 0x0 +#define MX6Q_PAD_RGMII_RXC__GPIO6_IO30 0x084 0x398 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A25__EIM_ADDR25 0x088 0x39c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A25__ECSPI4_SS1 0x088 0x39c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A25__ECSPI2_RDY 0x088 0x39c 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 0x088 0x39c 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS 0x088 0x39c 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_A25__GPIO5_IO02 0x088 0x39c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x088 0x39c 0x88c 0x6 0x0 +#define MX6Q_PAD_EIM_EB2__EIM_EB2_B 0x08c 0x3a0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_EB2__ECSPI1_SS0 0x08c 0x3a0 0x800 0x1 0x0 +#define MX6Q_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x08c 0x3a0 0x8d4 0x3 0x0 +#define MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x08c 0x3a0 0x890 0x4 0x0 +#define MX6Q_PAD_EIM_EB2__GPIO2_IO30 0x08c 0x3a0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_EB2__I2C2_SCL 0x08c 0x3a0 0x8a0 0x6 0x0 +#define MX6Q_PAD_EIM_EB2__SRC_BOOT_CFG30 0x08c 0x3a0 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D16__EIM_DATA16 0x090 0x3a4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x090 0x3a4 0x7f4 0x1 0x0 +#define MX6Q_PAD_EIM_D16__IPU1_DI0_PIN05 0x090 0x3a4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D16__IPU2_CSI1_DATA18 0x090 0x3a4 0x8d0 0x3 0x0 +#define MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x090 0x3a4 0x894 0x4 0x0 +#define MX6Q_PAD_EIM_D16__GPIO3_IO16 0x090 0x3a4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D16__I2C2_SDA 0x090 0x3a4 0x8a4 0x6 0x0 +#define MX6Q_PAD_EIM_D17__EIM_DATA17 0x094 0x3a8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x094 0x3a8 0x7f8 0x1 0x0 +#define MX6Q_PAD_EIM_D17__IPU1_DI0_PIN06 0x094 0x3a8 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK 0x094 0x3a8 0x8e0 0x3 0x0 +#define MX6Q_PAD_EIM_D17__DCIC1_OUT 0x094 0x3a8 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D17__GPIO3_IO17 0x094 0x3a8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D17__I2C3_SCL 0x094 0x3a8 0x8a8 0x6 0x0 +#define MX6Q_PAD_EIM_D18__EIM_DATA18 0x098 0x3ac 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x098 0x3ac 0x7fc 0x1 0x0 +#define MX6Q_PAD_EIM_D18__IPU1_DI0_PIN07 0x098 0x3ac 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D18__IPU2_CSI1_DATA17 0x098 0x3ac 0x8cc 0x3 0x0 +#define MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS 0x098 0x3ac 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D18__GPIO3_IO18 0x098 0x3ac 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D18__I2C3_SDA 0x098 0x3ac 0x8ac 0x6 0x0 +#define MX6Q_PAD_EIM_D19__EIM_DATA19 0x09c 0x3b0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D19__ECSPI1_SS1 0x09c 0x3b0 0x804 0x1 0x0 +#define MX6Q_PAD_EIM_D19__IPU1_DI0_PIN08 0x09c 0x3b0 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D19__IPU2_CSI1_DATA16 0x09c 0x3b0 0x8c8 0x3 0x0 +#define MX6Q_PAD_EIM_D19__UART1_CTS_B 0x09c 0x3b0 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D19__UART1_RTS_B 0x09c 0x3b0 0x91c 0x4 0x0 +#define MX6Q_PAD_EIM_D19__GPIO3_IO19 0x09c 0x3b0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D19__EPIT1_OUT 0x09c 0x3b0 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D20__EIM_DATA20 0x0a0 0x3b4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D20__ECSPI4_SS0 0x0a0 0x3b4 0x824 0x1 0x0 +#define MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 0x0a0 0x3b4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D20__IPU2_CSI1_DATA15 0x0a0 0x3b4 0x8c4 0x3 0x0 +#define MX6Q_PAD_EIM_D20__UART1_RTS_B 0x0a0 0x3b4 0x91c 0x4 0x1 +#define MX6Q_PAD_EIM_D20__UART1_CTS_B 0x0a0 0x3b4 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D20__GPIO3_IO20 0x0a0 0x3b4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D20__EPIT2_OUT 0x0a0 0x3b4 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D21__EIM_DATA21 0x0a4 0x3b8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D21__ECSPI4_SCLK 0x0a4 0x3b8 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 0x0a4 0x3b8 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D21__IPU2_CSI1_DATA11 0x0a4 0x3b8 0x8b4 0x3 0x0 +#define MX6Q_PAD_EIM_D21__USB_OTG_OC 0x0a4 0x3b8 0x944 0x4 0x0 +#define MX6Q_PAD_EIM_D21__GPIO3_IO21 0x0a4 0x3b8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D21__I2C1_SCL 0x0a4 0x3b8 0x898 0x6 0x0 +#define MX6Q_PAD_EIM_D21__SPDIF_IN 0x0a4 0x3b8 0x914 0x7 0x0 +#define MX6Q_PAD_EIM_D22__EIM_DATA22 0x0a8 0x3bc 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D22__ECSPI4_MISO 0x0a8 0x3bc 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D22__IPU1_DI0_PIN01 0x0a8 0x3bc 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D22__IPU2_CSI1_DATA10 0x0a8 0x3bc 0x8b0 0x3 0x0 +#define MX6Q_PAD_EIM_D22__USB_OTG_PWR 0x0a8 0x3bc 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D22__GPIO3_IO22 0x0a8 0x3bc 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D22__SPDIF_OUT 0x0a8 0x3bc 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D23__EIM_DATA23 0x0ac 0x3c0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS 0x0ac 0x3c0 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D23__UART3_CTS_B 0x0ac 0x3c0 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D23__UART3_RTS_B 0x0ac 0x3c0 0x92c 0x2 0x0 +#define MX6Q_PAD_EIM_D23__UART1_DCD_B 0x0ac 0x3c0 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN 0x0ac 0x3c0 0x8d8 0x4 0x0 +#define MX6Q_PAD_EIM_D23__GPIO3_IO23 0x0ac 0x3c0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN02 0x0ac 0x3c0 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 0x0ac 0x3c0 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_EB3__EIM_EB3_B 0x0b0 0x3c4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_EB3__ECSPI4_RDY 0x0b0 0x3c4 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_EB3__UART3_RTS_B 0x0b0 0x3c4 0x92c 0x2 0x1 +#define MX6Q_PAD_EIM_EB3__UART3_CTS_B 0x0b0 0x3c4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_EB3__UART1_RI_B 0x0b0 0x3c4 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x0b0 0x3c4 0x8dc 0x4 0x0 +#define MX6Q_PAD_EIM_EB3__GPIO2_IO31 0x0b0 0x3c4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN03 0x0b0 0x3c4 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_EB3__SRC_BOOT_CFG31 0x0b0 0x3c4 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D24__EIM_DATA24 0x0b4 0x3c8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D24__ECSPI4_SS2 0x0b4 0x3c8 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x0b4 0x3c8 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D24__UART3_RX_DATA 0x0b4 0x3c8 0x930 0x2 0x0 +#define MX6Q_PAD_EIM_D24__ECSPI1_SS2 0x0b4 0x3c8 0x808 0x3 0x0 +#define MX6Q_PAD_EIM_D24__ECSPI2_SS2 0x0b4 0x3c8 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D24__GPIO3_IO24 0x0b4 0x3c8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D24__AUD5_RXFS 0x0b4 0x3c8 0x7d8 0x6 0x0 +#define MX6Q_PAD_EIM_D24__UART1_DTR_B 0x0b4 0x3c8 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D25__EIM_DATA25 0x0b8 0x3cc 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D25__ECSPI4_SS3 0x0b8 0x3cc 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x0b8 0x3cc 0x930 0x2 0x1 +#define MX6Q_PAD_EIM_D25__UART3_TX_DATA 0x0b8 0x3cc 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D25__ECSPI1_SS3 0x0b8 0x3cc 0x80c 0x3 0x0 +#define MX6Q_PAD_EIM_D25__ECSPI2_SS3 0x0b8 0x3cc 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D25__GPIO3_IO25 0x0b8 0x3cc 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D25__AUD5_RXC 0x0b8 0x3cc 0x7d4 0x6 0x0 +#define MX6Q_PAD_EIM_D25__UART1_DSR_B 0x0b8 0x3cc 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D26__EIM_DATA26 0x0bc 0x3d0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 0x0bc 0x3d0 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D26__IPU1_CSI0_DATA01 0x0bc 0x3d0 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D26__IPU2_CSI1_DATA14 0x0bc 0x3d0 0x8c0 0x3 0x0 +#define MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x0bc 0x3d0 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D26__UART2_RX_DATA 0x0bc 0x3d0 0x928 0x4 0x0 +#define MX6Q_PAD_EIM_D26__GPIO3_IO26 0x0bc 0x3d0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D26__IPU1_SISG2 0x0bc 0x3d0 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D26__IPU1_DISP1_DATA22 0x0bc 0x3d0 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D27__EIM_DATA27 0x0c0 0x3d4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 0x0c0 0x3d4 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D27__IPU1_CSI0_DATA00 0x0c0 0x3d4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D27__IPU2_CSI1_DATA13 0x0c0 0x3d4 0x8bc 0x3 0x0 +#define MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x0c0 0x3d4 0x928 0x4 0x1 +#define MX6Q_PAD_EIM_D27__UART2_TX_DATA 0x0c0 0x3d4 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D27__GPIO3_IO27 0x0c0 0x3d4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D27__IPU1_SISG3 0x0c0 0x3d4 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D27__IPU1_DISP1_DATA23 0x0c0 0x3d4 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D28__EIM_DATA28 0x0c4 0x3d8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D28__I2C1_SDA 0x0c4 0x3d8 0x89c 0x1 0x0 +#define MX6Q_PAD_EIM_D28__ECSPI4_MOSI 0x0c4 0x3d8 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D28__IPU2_CSI1_DATA12 0x0c4 0x3d8 0x8b8 0x3 0x0 +#define MX6Q_PAD_EIM_D28__UART2_CTS_B 0x0c4 0x3d8 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D28__UART2_RTS_B 0x0c4 0x3d8 0x924 0x4 0x0 +#define MX6Q_PAD_EIM_D28__GPIO3_IO28 0x0c4 0x3d8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG 0x0c4 0x3d8 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 0x0c4 0x3d8 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D29__EIM_DATA29 0x0c8 0x3dc 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 0x0c8 0x3dc 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1 +#define MX6Q_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1 +#define MX6Q_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0 +#define MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D30__EIM_DATA30 0x0cc 0x3e0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D30__IPU1_DISP1_DATA21 0x0cc 0x3e0 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 0x0cc 0x3e0 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D30__IPU1_CSI0_DATA03 0x0cc 0x3e0 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_D30__UART3_CTS_B 0x0cc 0x3e0 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D30__UART3_RTS_B 0x0cc 0x3e0 0x92c 0x4 0x2 +#define MX6Q_PAD_EIM_D30__GPIO3_IO30 0x0cc 0x3e0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D30__USB_H1_OC 0x0cc 0x3e0 0x948 0x6 0x0 +#define MX6Q_PAD_EIM_D31__EIM_DATA31 0x0d0 0x3e4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D31__IPU1_DISP1_DATA20 0x0d0 0x3e4 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 0x0d0 0x3e4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D31__IPU1_CSI0_DATA02 0x0d0 0x3e4 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_D31__UART3_RTS_B 0x0d0 0x3e4 0x92c 0x4 0x3 +#define MX6Q_PAD_EIM_D31__UART3_CTS_B 0x0d0 0x3e4 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D31__GPIO3_IO31 0x0d0 0x3e4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D31__USB_H1_PWR 0x0d0 0x3e4 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_A24__EIM_ADDR24 0x0d4 0x3e8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A24__IPU1_DISP1_DATA19 0x0d4 0x3e8 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A24__IPU2_CSI1_DATA19 0x0d4 0x3e8 0x8d4 0x2 0x1 +#define MX6Q_PAD_EIM_A24__IPU2_SISG2 0x0d4 0x3e8 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_A24__IPU1_SISG2 0x0d4 0x3e8 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_A24__GPIO5_IO04 0x0d4 0x3e8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A24__SRC_BOOT_CFG24 0x0d4 0x3e8 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A23__EIM_ADDR23 0x0d8 0x3ec 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A23__IPU1_DISP1_DATA18 0x0d8 0x3ec 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A23__IPU2_CSI1_DATA18 0x0d8 0x3ec 0x8d0 0x2 0x1 +#define MX6Q_PAD_EIM_A23__IPU2_SISG3 0x0d8 0x3ec 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_A23__IPU1_SISG3 0x0d8 0x3ec 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_A23__GPIO6_IO06 0x0d8 0x3ec 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A23__SRC_BOOT_CFG23 0x0d8 0x3ec 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A22__EIM_ADDR22 0x0dc 0x3f0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A22__IPU1_DISP1_DATA17 0x0dc 0x3f0 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A22__IPU2_CSI1_DATA17 0x0dc 0x3f0 0x8cc 0x2 0x1 +#define MX6Q_PAD_EIM_A22__GPIO2_IO16 0x0dc 0x3f0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A22__SRC_BOOT_CFG22 0x0dc 0x3f0 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A21__EIM_ADDR21 0x0e0 0x3f4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A21__IPU1_DISP1_DATA16 0x0e0 0x3f4 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A21__IPU2_CSI1_DATA16 0x0e0 0x3f4 0x8c8 0x2 0x1 +#define MX6Q_PAD_EIM_A21__GPIO2_IO17 0x0e0 0x3f4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A21__SRC_BOOT_CFG21 0x0e0 0x3f4 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A20__EIM_ADDR20 0x0e4 0x3f8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A20__IPU1_DISP1_DATA15 0x0e4 0x3f8 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A20__IPU2_CSI1_DATA15 0x0e4 0x3f8 0x8c4 0x2 0x1 +#define MX6Q_PAD_EIM_A20__GPIO2_IO18 0x0e4 0x3f8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A20__SRC_BOOT_CFG20 0x0e4 0x3f8 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A19__EIM_ADDR19 0x0e8 0x3fc 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A19__IPU1_DISP1_DATA14 0x0e8 0x3fc 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A19__IPU2_CSI1_DATA14 0x0e8 0x3fc 0x8c0 0x2 0x1 +#define MX6Q_PAD_EIM_A19__GPIO2_IO19 0x0e8 0x3fc 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A19__SRC_BOOT_CFG19 0x0e8 0x3fc 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A18__EIM_ADDR18 0x0ec 0x400 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A18__IPU1_DISP1_DATA13 0x0ec 0x400 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A18__IPU2_CSI1_DATA13 0x0ec 0x400 0x8bc 0x2 0x1 +#define MX6Q_PAD_EIM_A18__GPIO2_IO20 0x0ec 0x400 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A18__SRC_BOOT_CFG18 0x0ec 0x400 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A17__EIM_ADDR17 0x0f0 0x404 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A17__IPU1_DISP1_DATA12 0x0f0 0x404 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A17__IPU2_CSI1_DATA12 0x0f0 0x404 0x8b8 0x2 0x1 +#define MX6Q_PAD_EIM_A17__GPIO2_IO21 0x0f0 0x404 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A17__SRC_BOOT_CFG17 0x0f0 0x404 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A16__EIM_ADDR16 0x0f4 0x408 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x0f4 0x408 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x0f4 0x408 0x8e0 0x2 0x1 +#define MX6Q_PAD_EIM_A16__GPIO2_IO22 0x0f4 0x408 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A16__SRC_BOOT_CFG16 0x0f4 0x408 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_CS0__EIM_CS0_B 0x0f8 0x40c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN05 0x0f8 0x40c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_CS0__ECSPI2_SCLK 0x0f8 0x40c 0x810 0x2 0x0 +#define MX6Q_PAD_EIM_CS0__GPIO2_IO23 0x0f8 0x40c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_CS1__EIM_CS1_B 0x0fc 0x410 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN06 0x0fc 0x410 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_CS1__ECSPI2_MOSI 0x0fc 0x410 0x818 0x2 0x0 +#define MX6Q_PAD_EIM_CS1__GPIO2_IO24 0x0fc 0x410 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_OE__EIM_OE_B 0x100 0x414 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_OE__IPU1_DI1_PIN07 0x100 0x414 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_OE__ECSPI2_MISO 0x100 0x414 0x814 0x2 0x0 +#define MX6Q_PAD_EIM_OE__GPIO2_IO25 0x100 0x414 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_RW__EIM_RW 0x104 0x418 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_RW__IPU1_DI1_PIN08 0x104 0x418 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_RW__ECSPI2_SS0 0x104 0x418 0x81c 0x2 0x0 +#define MX6Q_PAD_EIM_RW__GPIO2_IO26 0x104 0x418 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_RW__SRC_BOOT_CFG29 0x104 0x418 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_LBA__EIM_LBA_B 0x108 0x41c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 0x108 0x41c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_LBA__ECSPI2_SS1 0x108 0x41c 0x820 0x2 0x0 +#define MX6Q_PAD_EIM_LBA__GPIO2_IO27 0x108 0x41c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_LBA__SRC_BOOT_CFG26 0x108 0x41c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_EB0__EIM_EB0_B 0x10c 0x420 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x10c 0x420 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_EB0__IPU2_CSI1_DATA11 0x10c 0x420 0x8b4 0x2 0x1 +#define MX6Q_PAD_EIM_EB0__CCM_PMIC_READY 0x10c 0x420 0x7f0 0x4 0x0 +#define MX6Q_PAD_EIM_EB0__GPIO2_IO28 0x10c 0x420 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_EB0__SRC_BOOT_CFG27 0x10c 0x420 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_EB1__EIM_EB1_B 0x110 0x424 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x110 0x424 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_EB1__IPU2_CSI1_DATA10 0x110 0x424 0x8b0 0x2 0x1 +#define MX6Q_PAD_EIM_EB1__GPIO2_IO29 0x110 0x424 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_EB1__SRC_BOOT_CFG28 0x110 0x424 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA0__EIM_AD00 0x114 0x428 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x114 0x428 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA0__IPU2_CSI1_DATA09 0x114 0x428 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA0__GPIO3_IO00 0x114 0x428 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA0__SRC_BOOT_CFG00 0x114 0x428 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA1__EIM_AD01 0x118 0x42c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x118 0x42c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA1__IPU2_CSI1_DATA08 0x118 0x42c 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA1__GPIO3_IO01 0x118 0x42c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA1__SRC_BOOT_CFG01 0x118 0x42c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA2__EIM_AD02 0x11c 0x430 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x11c 0x430 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA2__IPU2_CSI1_DATA07 0x11c 0x430 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA2__GPIO3_IO02 0x11c 0x430 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA2__SRC_BOOT_CFG02 0x11c 0x430 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA3__EIM_AD03 0x120 0x434 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x120 0x434 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA3__IPU2_CSI1_DATA06 0x120 0x434 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA3__GPIO3_IO03 0x120 0x434 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA3__SRC_BOOT_CFG03 0x120 0x434 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA4__EIM_AD04 0x124 0x438 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x124 0x438 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA4__IPU2_CSI1_DATA05 0x124 0x438 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA4__GPIO3_IO04 0x124 0x438 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA4__SRC_BOOT_CFG04 0x124 0x438 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA5__EIM_AD05 0x128 0x43c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x128 0x43c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA5__IPU2_CSI1_DATA04 0x128 0x43c 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA5__GPIO3_IO05 0x128 0x43c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA5__SRC_BOOT_CFG05 0x128 0x43c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA6__EIM_AD06 0x12c 0x440 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x12c 0x440 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA6__IPU2_CSI1_DATA03 0x12c 0x440 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA6__GPIO3_IO06 0x12c 0x440 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA6__SRC_BOOT_CFG06 0x12c 0x440 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA7__EIM_AD07 0x130 0x444 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x130 0x444 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA7__IPU2_CSI1_DATA02 0x130 0x444 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA7__GPIO3_IO07 0x130 0x444 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA7__SRC_BOOT_CFG07 0x130 0x444 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA8__EIM_AD08 0x134 0x448 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x134 0x448 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA8__IPU2_CSI1_DATA01 0x134 0x448 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA8__GPIO3_IO08 0x134 0x448 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA8__SRC_BOOT_CFG08 0x134 0x448 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA9__EIM_AD09 0x138 0x44c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x138 0x44c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA9__IPU2_CSI1_DATA00 0x138 0x44c 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA9__GPIO3_IO09 0x138 0x44c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA9__SRC_BOOT_CFG09 0x138 0x44c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA10__EIM_AD10 0x13c 0x450 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 0x13c 0x450 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN 0x13c 0x450 0x8d8 0x2 0x1 +#define MX6Q_PAD_EIM_DA10__GPIO3_IO10 0x13c 0x450 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA10__SRC_BOOT_CFG10 0x13c 0x450 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA11__EIM_AD11 0x140 0x454 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN02 0x140 0x454 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC 0x140 0x454 0x8dc 0x2 0x1 +#define MX6Q_PAD_EIM_DA11__GPIO3_IO11 0x140 0x454 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA11__SRC_BOOT_CFG11 0x140 0x454 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA12__EIM_AD12 0x144 0x458 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN03 0x144 0x458 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC 0x144 0x458 0x8e4 0x2 0x1 +#define MX6Q_PAD_EIM_DA12__GPIO3_IO12 0x144 0x458 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA12__SRC_BOOT_CFG12 0x144 0x458 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA13__EIM_AD13 0x148 0x45c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x148 0x45c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA13__GPIO3_IO13 0x148 0x45c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA13__SRC_BOOT_CFG13 0x148 0x45c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA14__EIM_AD14 0x14c 0x460 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x14c 0x460 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA14__GPIO3_IO14 0x14c 0x460 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA14__SRC_BOOT_CFG14 0x14c 0x460 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA15__EIM_AD15 0x150 0x464 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN01 0x150 0x464 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN04 0x150 0x464 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA15__GPIO3_IO15 0x150 0x464 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA15__SRC_BOOT_CFG15 0x150 0x464 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0x154 0x468 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_WAIT__EIM_DTACK_B 0x154 0x468 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_WAIT__GPIO5_IO00 0x154 0x468 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x154 0x468 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_BCLK__EIM_BCLK 0x158 0x46c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x158 0x46c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_BCLK__GPIO6_IO31 0x158 0x46c 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x15c 0x470 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x15c 0x470 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_DISP_CLK__GPIO4_IO16 0x15c 0x470 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x160 0x474 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x160 0x474 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_PIN15__AUD6_TXC 0x160 0x474 0x000 0x2 0x0 +#define MX6Q_PAD_DI0_PIN15__GPIO4_IO17 0x160 0x474 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x164 0x478 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x164 0x478 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_PIN2__AUD6_TXD 0x164 0x478 0x000 0x2 0x0 +#define MX6Q_PAD_DI0_PIN2__GPIO4_IO18 0x164 0x478 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x168 0x47c 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x168 0x47c 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_PIN3__AUD6_TXFS 0x168 0x47c 0x000 0x2 0x0 +#define MX6Q_PAD_DI0_PIN3__GPIO4_IO19 0x168 0x47c 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x16c 0x480 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x16c 0x480 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_PIN4__AUD6_RXD 0x16c 0x480 0x000 0x2 0x0 +#define MX6Q_PAD_DI0_PIN4__SD1_WP 0x16c 0x480 0x94c 0x3 0x0 +#define MX6Q_PAD_DI0_PIN4__GPIO4_IO20 0x16c 0x480 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x170 0x484 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x170 0x484 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x170 0x484 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT0__GPIO4_IO21 0x170 0x484 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x174 0x488 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x174 0x488 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x174 0x488 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT1__GPIO4_IO22 0x174 0x488 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x178 0x48c 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x178 0x48c 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x178 0x48c 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT2__GPIO4_IO23 0x178 0x48c 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x17c 0x490 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x17c 0x490 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 0x17c 0x490 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT3__GPIO4_IO24 0x17c 0x490 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x180 0x494 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x180 0x494 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 0x180 0x494 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT4__GPIO4_IO25 0x180 0x494 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x184 0x498 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x184 0x498 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 0x184 0x498 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT5__AUD6_RXFS 0x184 0x498 0x000 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT5__GPIO4_IO26 0x184 0x498 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x188 0x49c 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x188 0x49c 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 0x188 0x49c 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT6__AUD6_RXC 0x188 0x49c 0x000 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT6__GPIO4_IO27 0x188 0x49c 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x18c 0x4a0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x18c 0x4a0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY 0x18c 0x4a0 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT7__GPIO4_IO28 0x18c 0x4a0 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x190 0x4a4 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x190 0x4a4 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT8__PWM1_OUT 0x190 0x4a4 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT8__WDOG1_B 0x190 0x4a4 0x000 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT8__GPIO4_IO29 0x190 0x4a4 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x194 0x4a8 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x194 0x4a8 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT9__PWM2_OUT 0x194 0x4a8 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT9__WDOG2_B 0x194 0x4a8 0x000 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT9__GPIO4_IO30 0x194 0x4a8 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x198 0x4ac 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x198 0x4ac 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT10__GPIO4_IO31 0x198 0x4ac 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x19c 0x4b0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x19c 0x4b0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT11__GPIO5_IO05 0x19c 0x4b0 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x1a0 0x4b4 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x1a0 0x4b4 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT12__GPIO5_IO06 0x1a0 0x4b4 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x1a4 0x4b8 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x1a4 0x4b8 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT13__AUD5_RXFS 0x1a4 0x4b8 0x7d8 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT13__GPIO5_IO07 0x1a4 0x4b8 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x1a8 0x4bc 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x1a8 0x4bc 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT14__AUD5_RXC 0x1a8 0x4bc 0x7d4 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT14__GPIO5_IO08 0x1a8 0x4bc 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x1ac 0x4c0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x1ac 0x4c0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 0x1ac 0x4c0 0x804 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 0x1ac 0x4c0 0x820 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT15__GPIO5_IO09 0x1ac 0x4c0 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x1b0 0x4c4 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x1b0 0x4c4 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI 0x1b0 0x4c4 0x818 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT16__AUD5_TXC 0x1b0 0x4c4 0x7dc 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x1b0 0x4c4 0x90c 0x4 0x0 +#define MX6Q_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0 0x4c4 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x1b4 0x4c8 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x1b4 0x4c8 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO 0x1b4 0x4c8 0x814 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT17__AUD5_TXD 0x1b4 0x4c8 0x7d0 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x1b4 0x4c8 0x910 0x4 0x0 +#define MX6Q_PAD_DISP0_DAT17__GPIO5_IO11 0x1b4 0x4c8 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x1b8 0x4cc 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x1b8 0x4cc 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 0x1b8 0x4cc 0x81c 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x1b8 0x4cc 0x7e0 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT18__AUD4_RXFS 0x1b8 0x4cc 0x7c0 0x4 0x0 +#define MX6Q_PAD_DISP0_DAT18__GPIO5_IO12 0x1b8 0x4cc 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT18__EIM_CS2_B 0x1b8 0x4cc 0x000 0x7 0x0 +#define MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x1bc 0x4d0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x1bc 0x4d0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK 0x1bc 0x4d0 0x810 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT19__AUD5_RXD 0x1bc 0x4d0 0x7cc 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT19__AUD4_RXC 0x1bc 0x4d0 0x7bc 0x4 0x0 +#define MX6Q_PAD_DISP0_DAT19__GPIO5_IO13 0x1bc 0x4d0 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT19__EIM_CS3_B 0x1bc 0x4d0 0x000 0x7 0x0 +#define MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x1c0 0x4d4 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x1c0 0x4d4 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK 0x1c0 0x4d4 0x7f4 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT20__AUD4_TXC 0x1c0 0x4d4 0x7c4 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT20__GPIO5_IO14 0x1c0 0x4d4 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x1c4 0x4d8 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x1c4 0x4d8 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI 0x1c4 0x4d8 0x7fc 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT21__AUD4_TXD 0x1c4 0x4d8 0x7b8 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT21__GPIO5_IO15 0x1c4 0x4d8 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x1c8 0x4dc 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x1c8 0x4dc 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO 0x1c8 0x4dc 0x7f8 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT22__AUD4_TXFS 0x1c8 0x4dc 0x7c8 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT22__GPIO5_IO16 0x1c8 0x4dc 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x1cc 0x4e0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x1cc 0x4e0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 0x1cc 0x4e0 0x800 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT23__AUD4_RXD 0x1cc 0x4e0 0x7b4 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT23__GPIO5_IO17 0x1cc 0x4e0 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1d0 0x4e4 0x840 0x1 0x0 +#define MX6Q_PAD_ENET_MDIO__ESAI_RX_CLK 0x1d0 0x4e4 0x86c 0x2 0x0 +#define MX6Q_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1d0 0x4e4 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_MDIO__GPIO1_IO22 0x1d0 0x4e4 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_MDIO__SPDIF_LOCK 0x1d0 0x4e4 0x000 0x6 0x0 +#define MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1d4 0x4e8 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0 +#define MX6Q_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0 +#define MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0 +#define MX6Q_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0 +#define MX6Q_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1 +#define MX6Q_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_RX_ER__GPIO1_IO24 0x1d8 0x4ec 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN 0x1dc 0x4f0 0x858 0x1 0x1 +#define MX6Q_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1dc 0x4f0 0x870 0x2 0x0 +#define MX6Q_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1dc 0x4f0 0x918 0x3 0x1 +#define MX6Q_PAD_ENET_CRS_DV__GPIO1_IO25 0x1dc 0x4f0 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_RXD1__MLB_SIG 0x1e0 0x4f4 0x908 0x0 0x0 +#define MX6Q_PAD_ENET_RXD1__ENET_RX_DATA1 0x1e0 0x4f4 0x84c 0x1 0x1 +#define MX6Q_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0 +#define MX6Q_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1 +#define MX6Q_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0 +#define MX6Q_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0 +#define MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x1e4 0x4f8 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 0x1e8 0x4fc 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1e8 0x4fc 0x880 0x2 0x0 +#define MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x1e8 0x4fc 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_TXD1__MLB_CLK 0x1ec 0x500 0x900 0x0 0x0 +#define MX6Q_PAD_ENET_TXD1__ENET_TX_DATA1 0x1ec 0x500 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1ec 0x500 0x87c 0x2 0x0 +#define MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x1ec 0x500 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x1ec 0x500 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_TXD0__ENET_TX_DATA0 0x1f0 0x504 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1f0 0x504 0x884 0x2 0x0 +#define MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x1f0 0x504 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_MDC__MLB_DATA 0x1f4 0x508 0x904 0x0 0x0 +#define MX6Q_PAD_ENET_MDC__ENET_MDC 0x1f4 0x508 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_MDC__ESAI_TX5_RX0 0x1f4 0x508 0x888 0x2 0x0 +#define MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1f4 0x508 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_MDC__GPIO1_IO31 0x1f4 0x508 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL0__ECSPI1_SCLK 0x1f8 0x5c8 0x7f4 0x0 0x2 +#define MX6Q_PAD_KEY_COL0__ENET_RX_DATA3 0x1f8 0x5c8 0x854 0x1 0x1 +#define MX6Q_PAD_KEY_COL0__AUD5_TXC 0x1f8 0x5c8 0x7dc 0x2 0x1 +#define MX6Q_PAD_KEY_COL0__KEY_COL0 0x1f8 0x5c8 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1f8 0x5c8 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_COL0__UART4_RX_DATA 0x1f8 0x5c8 0x938 0x4 0x0 +#define MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x1f8 0x5c8 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL0__DCIC1_OUT 0x1f8 0x5c8 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI 0x1fc 0x5cc 0x7fc 0x0 0x2 +#define MX6Q_PAD_KEY_ROW0__ENET_TX_DATA3 0x1fc 0x5cc 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_ROW0__AUD5_TXD 0x1fc 0x5cc 0x7d0 0x2 0x1 +#define MX6Q_PAD_KEY_ROW0__KEY_ROW0 0x1fc 0x5cc 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1fc 0x5cc 0x938 0x4 0x1 +#define MX6Q_PAD_KEY_ROW0__UART4_TX_DATA 0x1fc 0x5cc 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x1fc 0x5cc 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW0__DCIC2_OUT 0x1fc 0x5cc 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_COL1__ECSPI1_MISO 0x200 0x5d0 0x7f8 0x0 0x2 +#define MX6Q_PAD_KEY_COL1__ENET_MDIO 0x200 0x5d0 0x840 0x1 0x1 +#define MX6Q_PAD_KEY_COL1__AUD5_TXFS 0x200 0x5d0 0x7e0 0x2 0x1 +#define MX6Q_PAD_KEY_COL1__KEY_COL1 0x200 0x5d0 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x200 0x5d0 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_COL1__UART5_RX_DATA 0x200 0x5d0 0x940 0x4 0x0 +#define MX6Q_PAD_KEY_COL1__GPIO4_IO08 0x200 0x5d0 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL1__SD1_VSELECT 0x200 0x5d0 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 0x204 0x5d4 0x800 0x0 0x2 +#define MX6Q_PAD_KEY_ROW1__ENET_COL 0x204 0x5d4 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_ROW1__AUD5_RXD 0x204 0x5d4 0x7cc 0x2 0x1 +#define MX6Q_PAD_KEY_ROW1__KEY_ROW1 0x204 0x5d4 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x204 0x5d4 0x940 0x4 0x1 +#define MX6Q_PAD_KEY_ROW1__UART5_TX_DATA 0x204 0x5d4 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_ROW1__GPIO4_IO09 0x204 0x5d4 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW1__SD2_VSELECT 0x204 0x5d4 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_COL2__ECSPI1_SS1 0x208 0x5d8 0x804 0x0 0x2 +#define MX6Q_PAD_KEY_COL2__ENET_RX_DATA2 0x208 0x5d8 0x850 0x1 0x1 +#define MX6Q_PAD_KEY_COL2__FLEXCAN1_TX 0x208 0x5d8 0x000 0x2 0x0 +#define MX6Q_PAD_KEY_COL2__KEY_COL2 0x208 0x5d8 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL2__ENET_MDC 0x208 0x5d8 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x208 0x5d8 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x208 0x5d8 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 0x20c 0x5dc 0x808 0x0 0x1 +#define MX6Q_PAD_KEY_ROW2__ENET_TX_DATA2 0x20c 0x5dc 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x20c 0x5dc 0x7e4 0x2 0x0 +#define MX6Q_PAD_KEY_ROW2__KEY_ROW2 0x20c 0x5dc 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW2__SD2_VSELECT 0x20c 0x5dc 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_ROW2__GPIO4_IO11 0x20c 0x5dc 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x20c 0x5dc 0x88c 0x6 0x1 +#define MX6Q_PAD_KEY_COL3__ECSPI1_SS3 0x210 0x5e0 0x80c 0x0 0x1 +#define MX6Q_PAD_KEY_COL3__ENET_CRS 0x210 0x5e0 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x210 0x5e0 0x890 0x2 0x1 +#define MX6Q_PAD_KEY_COL3__KEY_COL3 0x210 0x5e0 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL3__I2C2_SCL 0x210 0x5e0 0x8a0 0x4 0x1 +#define MX6Q_PAD_KEY_COL3__GPIO4_IO12 0x210 0x5e0 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL3__SPDIF_IN 0x210 0x5e0 0x914 0x6 0x2 +#define MX6Q_PAD_KEY_ROW3__ASRC_EXT_CLK 0x214 0x5e4 0x7b0 0x1 0x0 +#define MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x214 0x5e4 0x894 0x2 0x1 +#define MX6Q_PAD_KEY_ROW3__KEY_ROW3 0x214 0x5e4 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x214 0x5e4 0x8a4 0x4 0x1 +#define MX6Q_PAD_KEY_ROW3__GPIO4_IO13 0x214 0x5e4 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW3__SD1_VSELECT 0x214 0x5e4 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_COL4__FLEXCAN2_TX 0x218 0x5e8 0x000 0x0 0x0 +#define MX6Q_PAD_KEY_COL4__IPU1_SISG4 0x218 0x5e8 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_COL4__USB_OTG_OC 0x218 0x5e8 0x944 0x2 0x1 +#define MX6Q_PAD_KEY_COL4__KEY_COL4 0x218 0x5e8 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL4__UART5_RTS_B 0x218 0x5e8 0x93c 0x4 0x0 +#define MX6Q_PAD_KEY_COL4__UART5_CTS_B 0x218 0x5e8 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_COL4__GPIO4_IO14 0x218 0x5e8 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW4__FLEXCAN2_RX 0x21c 0x5ec 0x7e8 0x0 0x0 +#define MX6Q_PAD_KEY_ROW4__IPU1_SISG5 0x21c 0x5ec 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_ROW4__USB_OTG_PWR 0x21c 0x5ec 0x000 0x2 0x0 +#define MX6Q_PAD_KEY_ROW4__KEY_ROW4 0x21c 0x5ec 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW4__UART5_CTS_B 0x21c 0x5ec 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_ROW4__UART5_RTS_B 0x21c 0x5ec 0x93c 0x4 0x1 +#define MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x21c 0x5ec 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_0__CCM_CLKO1 0x220 0x5f0 0x000 0x0 0x0 +#define MX6Q_PAD_GPIO_0__KEY_COL5 0x220 0x5f0 0x8e8 0x2 0x0 +#define MX6Q_PAD_GPIO_0__ASRC_EXT_CLK 0x220 0x5f0 0x7b0 0x3 0x1 +#define MX6Q_PAD_GPIO_0__EPIT1_OUT 0x220 0x5f0 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_0__GPIO1_IO00 0x220 0x5f0 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_0__USB_H1_PWR 0x220 0x5f0 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_0__SNVS_VIO_5 0x220 0x5f0 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1 +#define MX6Q_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0 +#define MX6Q_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_9__ESAI_RX_FS 0x228 0x5f8 0x85c 0x0 0x1 +#define MX6Q_PAD_GPIO_9__WDOG1_B 0x228 0x5f8 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_9__KEY_COL6 0x228 0x5f8 0x8ec 0x2 0x0 +#define MX6Q_PAD_GPIO_9__CCM_REF_EN_B 0x228 0x5f8 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_9__PWM1_OUT 0x228 0x5f8 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_9__GPIO1_IO09 0x228 0x5f8 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_9__SD1_WP 0x228 0x5f8 0x94c 0x6 0x1 +#define MX6Q_PAD_GPIO_3__ESAI_RX_HF_CLK 0x22c 0x5fc 0x864 0x0 0x1 +#define MX6Q_PAD_GPIO_3__I2C3_SCL 0x22c 0x5fc 0x8a8 0x2 0x1 +#define MX6Q_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x22c 0x5fc 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_3__CCM_CLKO2 0x22c 0x5fc 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_3__GPIO1_IO03 0x22c 0x5fc 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_3__USB_H1_OC 0x22c 0x5fc 0x948 0x6 0x1 +#define MX6Q_PAD_GPIO_3__MLB_CLK 0x22c 0x5fc 0x900 0x7 0x1 +#define MX6Q_PAD_GPIO_6__ESAI_TX_CLK 0x230 0x600 0x870 0x0 0x1 +#define MX6Q_PAD_GPIO_6__I2C3_SDA 0x230 0x600 0x8ac 0x2 0x1 +#define MX6Q_PAD_GPIO_6__GPIO1_IO06 0x230 0x600 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_6__SD2_LCTL 0x230 0x600 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_6__MLB_SIG 0x230 0x600 0x908 0x7 0x1 +#define MX6Q_PAD_GPIO_2__ESAI_TX_FS 0x234 0x604 0x860 0x0 0x1 +#define MX6Q_PAD_GPIO_2__KEY_ROW6 0x234 0x604 0x8f8 0x2 0x1 +#define MX6Q_PAD_GPIO_2__GPIO1_IO02 0x234 0x604 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_2__SD2_WP 0x234 0x604 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_2__MLB_DATA 0x234 0x604 0x904 0x7 0x1 +#define MX6Q_PAD_GPIO_4__ESAI_TX_HF_CLK 0x238 0x608 0x868 0x0 0x1 +#define MX6Q_PAD_GPIO_4__KEY_COL7 0x238 0x608 0x8f0 0x2 0x1 +#define MX6Q_PAD_GPIO_4__GPIO1_IO04 0x238 0x608 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_4__SD2_CD_B 0x238 0x608 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_5__ESAI_TX2_RX3 0x23c 0x60c 0x87c 0x0 0x1 +#define MX6Q_PAD_GPIO_5__KEY_ROW7 0x23c 0x60c 0x8fc 0x2 0x1 +#define MX6Q_PAD_GPIO_5__CCM_CLKO1 0x23c 0x60c 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_5__GPIO1_IO05 0x23c 0x60c 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_5__I2C3_SCL 0x23c 0x60c 0x8a8 0x6 0x2 +#define MX6Q_PAD_GPIO_5__ARM_EVENTI 0x23c 0x60c 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_7__ESAI_TX4_RX1 0x240 0x610 0x884 0x0 0x1 +#define MX6Q_PAD_GPIO_7__ECSPI5_RDY 0x240 0x610 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_7__EPIT1_OUT 0x240 0x610 0x000 0x2 0x0 +#define MX6Q_PAD_GPIO_7__FLEXCAN1_TX 0x240 0x610 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_7__UART2_TX_DATA 0x240 0x610 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_7__UART2_RX_DATA 0x240 0x610 0x928 0x4 0x2 +#define MX6Q_PAD_GPIO_7__GPIO1_IO07 0x240 0x610 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_7__SPDIF_LOCK 0x240 0x610 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_7__USB_OTG_HOST_MODE 0x240 0x610 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_8__ESAI_TX5_RX0 0x244 0x614 0x888 0x0 0x1 +#define MX6Q_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x244 0x614 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_8__EPIT2_OUT 0x244 0x614 0x000 0x2 0x0 +#define MX6Q_PAD_GPIO_8__FLEXCAN1_RX 0x244 0x614 0x7e4 0x3 0x1 +#define MX6Q_PAD_GPIO_8__UART2_RX_DATA 0x244 0x614 0x928 0x4 0x3 +#define MX6Q_PAD_GPIO_8__UART2_TX_DATA 0x244 0x614 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_8__GPIO1_IO08 0x244 0x614 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_8__SPDIF_SR_CLK 0x244 0x614 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x244 0x614 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_16__ESAI_TX3_RX2 0x248 0x618 0x880 0x0 0x1 +#define MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x248 0x618 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_16__ENET_REF_CLK 0x248 0x618 0x83c 0x2 0x1 +#define MX6Q_PAD_GPIO_16__SD1_LCTL 0x248 0x618 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_16__SPDIF_IN 0x248 0x618 0x914 0x4 0x3 +#define MX6Q_PAD_GPIO_16__GPIO7_IO11 0x248 0x618 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_16__I2C3_SDA 0x248 0x618 0x8ac 0x6 0x2 +#define MX6Q_PAD_GPIO_16__JTAG_DE_B 0x248 0x618 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_17__ESAI_TX0 0x24c 0x61c 0x874 0x0 0x0 +#define MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x24c 0x61c 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_17__CCM_PMIC_READY 0x24c 0x61c 0x7f0 0x2 0x1 +#define MX6Q_PAD_GPIO_17__SDMA_EXT_EVENT0 0x24c 0x61c 0x90c 0x3 0x1 +#define MX6Q_PAD_GPIO_17__SPDIF_OUT 0x24c 0x61c 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_17__GPIO7_IO12 0x24c 0x61c 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_18__ESAI_TX1 0x250 0x620 0x878 0x0 0x0 +#define MX6Q_PAD_GPIO_18__ENET_RX_CLK 0x250 0x620 0x844 0x1 0x1 +#define MX6Q_PAD_GPIO_18__SD3_VSELECT 0x250 0x620 0x000 0x2 0x0 +#define MX6Q_PAD_GPIO_18__SDMA_EXT_EVENT1 0x250 0x620 0x910 0x3 0x1 +#define MX6Q_PAD_GPIO_18__ASRC_EXT_CLK 0x250 0x620 0x7b0 0x4 0x2 +#define MX6Q_PAD_GPIO_18__GPIO7_IO13 0x250 0x620 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_18__SNVS_VIO_5_CTL 0x250 0x620 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_19__KEY_COL5 0x254 0x624 0x8e8 0x0 0x1 +#define MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x254 0x624 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_19__SPDIF_OUT 0x254 0x624 0x000 0x2 0x0 +#define MX6Q_PAD_GPIO_19__CCM_CLKO1 0x254 0x624 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_19__ECSPI1_RDY 0x254 0x624 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_19__GPIO4_IO05 0x254 0x624 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_19__ENET_TX_ER 0x254 0x624 0x000 0x6 0x0 +#define MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x258 0x628 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_PIXCLK__GPIO5_IO18 0x258 0x628 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_PIXCLK__ARM_EVENTO 0x258 0x628 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x25c 0x62c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_MCLK__CCM_CLKO1 0x25c 0x62c 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_MCLK__GPIO5_IO19 0x25c 0x62c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x25c 0x62c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x260 0x630 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DATA_EN__EIM_DATA00 0x260 0x630 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DATA_EN__GPIO5_IO20 0x260 0x630 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x260 0x630 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x264 0x634 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_VSYNC__EIM_DATA01 0x264 0x634 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_VSYNC__GPIO5_IO21 0x264 0x634 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_VSYNC__ARM_TRACE00 0x264 0x634 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x268 0x638 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT4__EIM_DATA02 0x268 0x638 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK 0x268 0x638 0x7f4 0x2 0x3 +#define MX6Q_PAD_CSI0_DAT4__KEY_COL5 0x268 0x638 0x8e8 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT4__AUD3_TXC 0x268 0x638 0x000 0x4 0x0 +#define MX6Q_PAD_CSI0_DAT4__GPIO5_IO22 0x268 0x638 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT4__ARM_TRACE01 0x268 0x638 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x26c 0x63c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT5__EIM_DATA03 0x26c 0x63c 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI 0x26c 0x63c 0x7fc 0x2 0x3 +#define MX6Q_PAD_CSI0_DAT5__KEY_ROW5 0x26c 0x63c 0x8f4 0x3 0x1 +#define MX6Q_PAD_CSI0_DAT5__AUD3_TXD 0x26c 0x63c 0x000 0x4 0x0 +#define MX6Q_PAD_CSI0_DAT5__GPIO5_IO23 0x26c 0x63c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT5__ARM_TRACE02 0x26c 0x63c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x270 0x640 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT6__EIM_DATA04 0x270 0x640 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO 0x270 0x640 0x7f8 0x2 0x3 +#define MX6Q_PAD_CSI0_DAT6__KEY_COL6 0x270 0x640 0x8ec 0x3 0x1 +#define MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x270 0x640 0x000 0x4 0x0 +#define MX6Q_PAD_CSI0_DAT6__GPIO5_IO24 0x270 0x640 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT6__ARM_TRACE03 0x270 0x640 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x274 0x644 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT7__EIM_DATA05 0x274 0x644 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 0x274 0x644 0x800 0x2 0x3 +#define MX6Q_PAD_CSI0_DAT7__KEY_ROW6 0x274 0x644 0x8f8 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT7__AUD3_RXD 0x274 0x644 0x000 0x4 0x0 +#define MX6Q_PAD_CSI0_DAT7__GPIO5_IO25 0x274 0x644 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT7__ARM_TRACE04 0x274 0x644 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x278 0x648 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT8__EIM_DATA06 0x278 0x648 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK 0x278 0x648 0x810 0x2 0x2 +#define MX6Q_PAD_CSI0_DAT8__KEY_COL7 0x278 0x648 0x8f0 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x278 0x648 0x89c 0x4 0x1 +#define MX6Q_PAD_CSI0_DAT8__GPIO5_IO26 0x278 0x648 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT8__ARM_TRACE05 0x278 0x648 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x27c 0x64c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT9__EIM_DATA07 0x27c 0x64c 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI 0x27c 0x64c 0x818 0x2 0x2 +#define MX6Q_PAD_CSI0_DAT9__KEY_ROW7 0x27c 0x64c 0x8fc 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x27c 0x64c 0x898 0x4 0x1 +#define MX6Q_PAD_CSI0_DAT9__GPIO5_IO27 0x27c 0x64c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT9__ARM_TRACE06 0x27c 0x64c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x280 0x650 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT10__AUD3_RXC 0x280 0x650 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO 0x280 0x650 0x814 0x2 0x2 +#define MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x280 0x650 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT10__UART1_RX_DATA 0x280 0x650 0x920 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT10__GPIO5_IO28 0x280 0x650 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT10__ARM_TRACE07 0x280 0x650 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x284 0x654 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT11__AUD3_RXFS 0x284 0x654 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 0x284 0x654 0x81c 0x2 0x2 +#define MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x284 0x654 0x920 0x3 0x1 +#define MX6Q_PAD_CSI0_DAT11__UART1_TX_DATA 0x284 0x654 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT11__GPIO5_IO29 0x284 0x654 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT11__ARM_TRACE08 0x284 0x654 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x288 0x658 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT12__EIM_DATA08 0x288 0x658 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT12__UART4_TX_DATA 0x288 0x658 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT12__UART4_RX_DATA 0x288 0x658 0x938 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT12__GPIO5_IO30 0x288 0x658 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT12__ARM_TRACE09 0x288 0x658 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x28c 0x65c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT13__EIM_DATA09 0x28c 0x65c 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT13__UART4_RX_DATA 0x28c 0x65c 0x938 0x3 0x3 +#define MX6Q_PAD_CSI0_DAT13__UART4_TX_DATA 0x28c 0x65c 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT13__GPIO5_IO31 0x28c 0x65c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT13__ARM_TRACE10 0x28c 0x65c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x290 0x660 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT14__EIM_DATA10 0x290 0x660 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT14__UART5_TX_DATA 0x290 0x660 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT14__UART5_RX_DATA 0x290 0x660 0x940 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT14__GPIO6_IO00 0x290 0x660 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT14__ARM_TRACE11 0x290 0x660 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x294 0x664 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT15__EIM_DATA11 0x294 0x664 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT15__UART5_RX_DATA 0x294 0x664 0x940 0x3 0x3 +#define MX6Q_PAD_CSI0_DAT15__UART5_TX_DATA 0x294 0x664 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT15__GPIO6_IO01 0x294 0x664 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT15__ARM_TRACE12 0x294 0x664 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x298 0x668 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT16__EIM_DATA12 0x298 0x668 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT16__UART4_RTS_B 0x298 0x668 0x934 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT16__UART4_CTS_B 0x298 0x668 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT16__GPIO6_IO02 0x298 0x668 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT16__ARM_TRACE13 0x298 0x668 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x29c 0x66c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT17__EIM_DATA13 0x29c 0x66c 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT17__UART4_CTS_B 0x29c 0x66c 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT17__UART4_RTS_B 0x29c 0x66c 0x934 0x3 0x1 +#define MX6Q_PAD_CSI0_DAT17__GPIO6_IO03 0x29c 0x66c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT17__ARM_TRACE14 0x29c 0x66c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x2a0 0x670 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT18__EIM_DATA14 0x2a0 0x670 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT18__UART5_RTS_B 0x2a0 0x670 0x93c 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT18__UART5_CTS_B 0x2a0 0x670 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT18__GPIO6_IO04 0x2a0 0x670 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT18__ARM_TRACE15 0x2a0 0x670 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x2a4 0x674 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT19__EIM_DATA15 0x2a4 0x674 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT19__UART5_CTS_B 0x2a4 0x674 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT19__UART5_RTS_B 0x2a4 0x674 0x93c 0x3 0x3 +#define MX6Q_PAD_CSI0_DAT19__GPIO6_IO05 0x2a4 0x674 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x2a8 0x690 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x2a8 0x690 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT7__UART1_RX_DATA 0x2a8 0x690 0x920 0x1 0x2 +#define MX6Q_PAD_SD3_DAT7__GPIO6_IO17 0x2a8 0x690 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x2ac 0x694 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x2ac 0x694 0x920 0x1 0x3 +#define MX6Q_PAD_SD3_DAT6__UART1_TX_DATA 0x2ac 0x694 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT6__GPIO6_IO18 0x2ac 0x694 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x2b0 0x698 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT5__UART2_TX_DATA 0x2b0 0x698 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT5__UART2_RX_DATA 0x2b0 0x698 0x928 0x1 0x4 +#define MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x2b0 0x698 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x2b4 0x69c 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT4__UART2_RX_DATA 0x2b4 0x69c 0x928 0x1 0x5 +#define MX6Q_PAD_SD3_DAT4__UART2_TX_DATA 0x2b4 0x69c 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x2b4 0x69c 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_CMD__SD3_CMD 0x2b8 0x6a0 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_CMD__UART2_CTS_B 0x2b8 0x6a0 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_CMD__UART2_RTS_B 0x2b8 0x6a0 0x924 0x1 0x2 +#define MX6Q_PAD_SD3_CMD__FLEXCAN1_TX 0x2b8 0x6a0 0x000 0x2 0x0 +#define MX6Q_PAD_SD3_CMD__GPIO7_IO02 0x2b8 0x6a0 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_CLK__SD3_CLK 0x2bc 0x6a4 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_CLK__UART2_RTS_B 0x2bc 0x6a4 0x924 0x1 0x3 +#define MX6Q_PAD_SD3_CLK__UART2_CTS_B 0x2bc 0x6a4 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_CLK__FLEXCAN1_RX 0x2bc 0x6a4 0x7e4 0x2 0x2 +#define MX6Q_PAD_SD3_CLK__GPIO7_IO03 0x2bc 0x6a4 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x2c0 0x6a8 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT0__UART1_CTS_B 0x2c0 0x6a8 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT0__UART1_RTS_B 0x2c0 0x6a8 0x91c 0x1 0x2 +#define MX6Q_PAD_SD3_DAT0__FLEXCAN2_TX 0x2c0 0x6a8 0x000 0x2 0x0 +#define MX6Q_PAD_SD3_DAT0__GPIO7_IO04 0x2c0 0x6a8 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x2c4 0x6ac 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT1__UART1_RTS_B 0x2c4 0x6ac 0x91c 0x1 0x3 +#define MX6Q_PAD_SD3_DAT1__UART1_CTS_B 0x2c4 0x6ac 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT1__FLEXCAN2_RX 0x2c4 0x6ac 0x7e8 0x2 0x1 +#define MX6Q_PAD_SD3_DAT1__GPIO7_IO05 0x2c4 0x6ac 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x2c8 0x6b0 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT2__GPIO7_IO06 0x2c8 0x6b0 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x2cc 0x6b4 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT3__UART3_CTS_B 0x2cc 0x6b4 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT3__UART3_RTS_B 0x2cc 0x6b4 0x92c 0x1 0x4 +#define MX6Q_PAD_SD3_DAT3__GPIO7_IO07 0x2cc 0x6b4 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_RST__SD3_RESET 0x2d0 0x6b8 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_RST__UART3_RTS_B 0x2d0 0x6b8 0x92c 0x1 0x5 +#define MX6Q_PAD_SD3_RST__UART3_CTS_B 0x2d0 0x6b8 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_RST__GPIO7_IO08 0x2d0 0x6b8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CLE__NAND_CLE 0x2d4 0x6bc 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CLE__IPU2_SISG4 0x2d4 0x6bc 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_CLE__GPIO6_IO07 0x2d4 0x6bc 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_ALE__NAND_ALE 0x2d8 0x6c0 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_ALE__SD4_RESET 0x2d8 0x6c0 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_ALE__GPIO6_IO08 0x2d8 0x6c0 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0x2dc 0x6c4 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_WP_B__IPU2_SISG5 0x2dc 0x6c4 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_WP_B__GPIO6_IO09 0x2dc 0x6c4 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_RB0__NAND_READY_B 0x2e0 0x6c8 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN01 0x2e0 0x6c8 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_RB0__GPIO6_IO10 0x2e0 0x6c8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0x2e4 0x6cc 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x2e4 0x6cc 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0x2e8 0x6d0 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CS1__SD4_VSELECT 0x2e8 0x6d0 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_CS1__SD3_VSELECT 0x2e8 0x6d0 0x000 0x2 0x0 +#define MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x2e8 0x6d0 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0x2ec 0x6d4 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CS2__IPU1_SISG0 0x2ec 0x6d4 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_CS2__ESAI_TX0 0x2ec 0x6d4 0x874 0x2 0x1 +#define MX6Q_PAD_NANDF_CS2__EIM_CRE 0x2ec 0x6d4 0x000 0x3 0x0 +#define MX6Q_PAD_NANDF_CS2__CCM_CLKO2 0x2ec 0x6d4 0x000 0x4 0x0 +#define MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x2ec 0x6d4 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS2__IPU2_SISG0 0x2ec 0x6d4 0x000 0x6 0x0 +#define MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0x2f0 0x6d8 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CS3__IPU1_SISG1 0x2f0 0x6d8 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_CS3__ESAI_TX1 0x2f0 0x6d8 0x878 0x2 0x1 +#define MX6Q_PAD_NANDF_CS3__EIM_ADDR26 0x2f0 0x6d8 0x000 0x3 0x0 +#define MX6Q_PAD_NANDF_CS3__GPIO6_IO16 0x2f0 0x6d8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS3__IPU2_SISG1 0x2f0 0x6d8 0x000 0x6 0x0 +#define MX6Q_PAD_SD4_CMD__SD4_CMD 0x2f4 0x6dc 0x000 0x0 0x0 +#define MX6Q_PAD_SD4_CMD__NAND_RE_B 0x2f4 0x6dc 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x2f4 0x6dc 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_CMD__UART3_RX_DATA 0x2f4 0x6dc 0x930 0x2 0x2 +#define MX6Q_PAD_SD4_CMD__GPIO7_IO09 0x2f4 0x6dc 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_CLK__SD4_CLK 0x2f8 0x6e0 0x000 0x0 0x0 +#define MX6Q_PAD_SD4_CLK__NAND_WE_B 0x2f8 0x6e0 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x2f8 0x6e0 0x930 0x2 0x3 +#define MX6Q_PAD_SD4_CLK__UART3_TX_DATA 0x2f8 0x6e0 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_CLK__GPIO7_IO10 0x2f8 0x6e0 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D0__NAND_DATA00 0x2fc 0x6e4 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D0__SD1_DATA4 0x2fc 0x6e4 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x2fc 0x6e4 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D1__NAND_DATA01 0x300 0x6e8 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D1__SD1_DATA5 0x300 0x6e8 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x300 0x6e8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D2__NAND_DATA02 0x304 0x6ec 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D2__SD1_DATA6 0x304 0x6ec 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x304 0x6ec 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D3__NAND_DATA03 0x308 0x6f0 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D3__SD1_DATA7 0x308 0x6f0 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x308 0x6f0 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D4__NAND_DATA04 0x30c 0x6f4 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D4__SD2_DATA4 0x30c 0x6f4 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D4__GPIO2_IO04 0x30c 0x6f4 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D5__NAND_DATA05 0x310 0x6f8 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D5__SD2_DATA5 0x310 0x6f8 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D5__GPIO2_IO05 0x310 0x6f8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D6__NAND_DATA06 0x314 0x6fc 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D6__SD2_DATA6 0x314 0x6fc 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x314 0x6fc 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D7__NAND_DATA07 0x318 0x700 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D7__SD2_DATA7 0x318 0x700 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x318 0x700 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x31c 0x704 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT0__NAND_DQS 0x31c 0x704 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT0__GPIO2_IO08 0x31c 0x704 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x320 0x708 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT1__PWM3_OUT 0x320 0x708 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT1__GPIO2_IO09 0x320 0x708 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x324 0x70c 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT2__PWM4_OUT 0x324 0x70c 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT2__GPIO2_IO10 0x324 0x70c 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x328 0x710 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x328 0x710 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x32c 0x714 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x32c 0x714 0x928 0x2 0x6 +#define MX6Q_PAD_SD4_DAT4__UART2_TX_DATA 0x32c 0x714 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT4__GPIO2_IO12 0x32c 0x714 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x330 0x718 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT5__UART2_RTS_B 0x330 0x718 0x924 0x2 0x4 +#define MX6Q_PAD_SD4_DAT5__UART2_CTS_B 0x330 0x718 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT5__GPIO2_IO13 0x330 0x718 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x334 0x71c 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT6__UART2_CTS_B 0x334 0x71c 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT6__UART2_RTS_B 0x334 0x71c 0x924 0x2 0x5 +#define MX6Q_PAD_SD4_DAT6__GPIO2_IO14 0x334 0x71c 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x338 0x720 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x338 0x720 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT7__UART2_RX_DATA 0x338 0x720 0x928 0x2 0x7 +#define MX6Q_PAD_SD4_DAT7__GPIO2_IO15 0x338 0x720 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT1__SD1_DATA1 0x33c 0x724 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 0x33c 0x724 0x834 0x1 0x1 +#define MX6Q_PAD_SD1_DAT1__PWM3_OUT 0x33c 0x724 0x000 0x2 0x0 +#define MX6Q_PAD_SD1_DAT1__GPT_CAPTURE2 0x33c 0x724 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_DAT1__GPIO1_IO17 0x33c 0x724 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT0__SD1_DATA0 0x340 0x728 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_DAT0__ECSPI5_MISO 0x340 0x728 0x82c 0x1 0x1 +#define MX6Q_PAD_SD1_DAT0__GPT_CAPTURE1 0x340 0x728 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x340 0x728 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT3__SD1_DATA3 0x344 0x72c 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 0x344 0x72c 0x000 0x1 0x0 +#define MX6Q_PAD_SD1_DAT3__GPT_COMPARE3 0x344 0x72c 0x000 0x2 0x0 +#define MX6Q_PAD_SD1_DAT3__PWM1_OUT 0x344 0x72c 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_DAT3__WDOG2_B 0x344 0x72c 0x000 0x4 0x0 +#define MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x344 0x72c 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x344 0x72c 0x000 0x6 0x0 +#define MX6Q_PAD_SD1_CMD__SD1_CMD 0x348 0x730 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_CMD__ECSPI5_MOSI 0x348 0x730 0x830 0x1 0x0 +#define MX6Q_PAD_SD1_CMD__PWM4_OUT 0x348 0x730 0x000 0x2 0x0 +#define MX6Q_PAD_SD1_CMD__GPT_COMPARE1 0x348 0x730 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_CMD__GPIO1_IO18 0x348 0x730 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT2__SD1_DATA2 0x34c 0x734 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 0x34c 0x734 0x838 0x1 0x1 +#define MX6Q_PAD_SD1_DAT2__GPT_COMPARE2 0x34c 0x734 0x000 0x2 0x0 +#define MX6Q_PAD_SD1_DAT2__PWM2_OUT 0x34c 0x734 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_DAT2__WDOG1_B 0x34c 0x734 0x000 0x4 0x0 +#define MX6Q_PAD_SD1_DAT2__GPIO1_IO19 0x34c 0x734 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x34c 0x734 0x000 0x6 0x0 +#define MX6Q_PAD_SD1_CLK__SD1_CLK 0x350 0x738 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_CLK__ECSPI5_SCLK 0x350 0x738 0x828 0x1 0x0 +#define MX6Q_PAD_SD1_CLK__GPT_CLKIN 0x350 0x738 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_CLK__GPIO1_IO20 0x350 0x738 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_CLK__SD2_CLK 0x354 0x73c 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_CLK__ECSPI5_SCLK 0x354 0x73c 0x828 0x1 0x1 +#define MX6Q_PAD_SD2_CLK__KEY_COL5 0x354 0x73c 0x8e8 0x2 0x3 +#define MX6Q_PAD_SD2_CLK__AUD4_RXFS 0x354 0x73c 0x7c0 0x3 0x1 +#define MX6Q_PAD_SD2_CLK__GPIO1_IO10 0x354 0x73c 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_CMD__SD2_CMD 0x358 0x740 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_CMD__ECSPI5_MOSI 0x358 0x740 0x830 0x1 0x1 +#define MX6Q_PAD_SD2_CMD__KEY_ROW5 0x358 0x740 0x8f4 0x2 0x2 +#define MX6Q_PAD_SD2_CMD__AUD4_RXC 0x358 0x740 0x7bc 0x3 0x1 +#define MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x358 0x740 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x35c 0x744 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 0x35c 0x744 0x000 0x1 0x0 +#define MX6Q_PAD_SD2_DAT3__KEY_COL6 0x35c 0x744 0x8ec 0x2 0x2 +#define MX6Q_PAD_SD2_DAT3__AUD4_TXC 0x35c 0x744 0x7c4 0x3 0x1 +#define MX6Q_PAD_SD2_DAT3__GPIO1_IO12 0x35c 0x744 0x000 0x5 0x0 + +#endif /* __DTS_IMX6Q_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts index 656d489122fe..49d6f2831ec9 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -11,15 +11,13 @@ */ /dts-v1/; -/include/ "imx6q.dtsi" + +#include "imx6q.dtsi" +#include "imx6qdl-sabreauto.dtsi" / { model = "Freescale i.MX6 Quad SABRE Automotive Board"; compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; - - memory { - reg = <0x10000000 0x80000000>; - }; }; &iomuxc { @@ -29,30 +27,9 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ - 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ + MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 + MX6Q_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 >; }; }; }; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4_1>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_2>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - cd-gpios = <&gpio6 15 0>; - wp-gpios = <&gpio1 13 0>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 2ce355cd05e5..6a000666c147 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx6q.dtsi" +#include "imx6q.dtsi" / { model = "Freescale i.MX6 Quad SABRE Lite Board"; @@ -91,14 +91,14 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ - 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ - 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ - 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ - 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ - 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ - 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ - 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ + MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x80000000 + MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x80000000 + MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 + MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 + MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000 + MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 + MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 2dea304a7980..442051350225 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -11,37 +11,13 @@ */ /dts-v1/; -/include/ "imx6q.dtsi" + +#include "imx6q.dtsi" +#include "imx6qdl-sabresd.dtsi" / { - model = "Freescale i.MX6Q SABRE Smart Device Board"; + model = "Freescale i.MX6 Quad SABRE Smart Device Board"; compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; - - memory { - reg = <0x10000000 0x40000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - volume-up { - label = "Volume Up"; - gpios = <&gpio1 4 0>; - linux,code = <115>; /* KEY_VOLUMEUP */ - }; - - volume-down { - label = "Volume Down"; - gpios = <&gpio1 5 0>; - linux,code = <114>; /* KEY_VOLUMEDOWN */ - }; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; }; &iomuxc { @@ -51,36 +27,13 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ - 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ - 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ - 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ - 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ - 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ + MX6Q_PAD_GPIO_4__GPIO1_IO04 0x80000000 + MX6Q_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x80000000 + MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000 + MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000 + MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000 >; }; }; }; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2_1>; - cd-gpios = <&gpio2 2 0>; - wp-gpios = <&gpio2 3 0>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - cd-gpios = <&gpio2 0 0>; - wp-gpios = <&gpio2 1 0>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts new file mode 100644 index 000000000000..ee6addf149af --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sbc6x.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2013 Pavel Machek <pavel@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License V2. + */ + +/dts-v1/; +#include "imx6q.dtsi" + +/ { + model = "MicroSys sbc6x board"; + compatible = "microsys,sbc6x", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index cba021eb035e..21e675848bd1 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -8,7 +8,8 @@ * */ -/include/ "imx6qdl.dtsi" +#include "imx6qdl.dtsi" +#include "imx6q-pinfunc.h" / { cpus { @@ -78,10 +79,19 @@ audmux { pinctrl_audmux_1: audmux-1 { fsl,pins = < - 18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ - 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ - 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ - 3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + MX6Q_PAD_SD2_DAT0__AUD4_RXD 0x80000000 + MX6Q_PAD_SD2_DAT3__AUD4_TXC 0x80000000 + MX6Q_PAD_SD2_DAT2__AUD4_TXD 0x80000000 + MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x80000000 + >; + }; + + pinctrl_audmux_2: audmux-2 { + fsl,pins = < + MX6Q_PAD_CSI0_DAT7__AUD3_RXD 0x80000000 + MX6Q_PAD_CSI0_DAT4__AUD3_TXC 0x80000000 + MX6Q_PAD_CSI0_DAT5__AUD3_TXD 0x80000000 + MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000 >; }; }; @@ -89,9 +99,19 @@ ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { fsl,pins = < - 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ - 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ - 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + >; + }; + }; + + ecspi3 { + pinctrl_ecspi3_1: ecspi3grp-1 { + fsl,pins = < + MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 >; }; }; @@ -99,42 +119,42 @@ enet { pinctrl_enet_1: enetgrp-1 { fsl,pins = < - 695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */ - 756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */ - 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ - 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ - 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ - 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ - 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ - 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ - 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ - 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ - 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ - 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ - 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ - 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ - 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ - 1033 0x4001b0a8 /* MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT*/ + MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6Q_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; pinctrl_enet_2: enetgrp-2 { fsl,pins = < - 890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */ - 909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */ - 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ - 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ - 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ - 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ - 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ - 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ - 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ - 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ - 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ - 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ - 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ - 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ - 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + MX6Q_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6Q_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 >; }; }; @@ -142,25 +162,25 @@ gpmi-nand { pinctrl_gpmi_nand_1: gpmi-nand-1 { fsl,pins = < - 1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ - 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ - 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ - 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ - 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ - 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ - 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ - 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ - 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ - 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ - 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ - 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ - 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ - 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ - 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ - 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ - 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ - 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ - 1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 + MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 + MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1 >; }; }; @@ -168,8 +188,26 @@ i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = < - 137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ - 196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + MX6Q_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + MX6Q_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + }; + + i2c3 { + pinctrl_i2c3_1: i2c3grp-1 { + fsl,pins = < + MX6Q_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 >; }; }; @@ -177,8 +215,8 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - 1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */ - 1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */ + MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; }; @@ -186,8 +224,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ - 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */ + MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 >; }; }; @@ -195,8 +233,8 @@ uart4 { pinctrl_uart4_1: uart4grp-1 { fsl,pins = < - 877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */ - 885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */ + MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 >; }; }; @@ -204,7 +242,13 @@ usbotg { pinctrl_usbotg_1: usbotggrp-1 { fsl,pins = < - 1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */ + MX6Q_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usbotg_2: usbotggrp-2 { + fsl,pins = < + MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; }; @@ -212,16 +256,16 @@ usdhc2 { pinctrl_usdhc2_1: usdhc2grp-1 { fsl,pins = < - 1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */ - 1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */ - 16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */ - 0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */ - 8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */ - 1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */ - 1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */ - 1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */ - 1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */ - 1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */ + MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6Q_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6Q_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6Q_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059 >; }; }; @@ -229,27 +273,27 @@ usdhc3 { pinctrl_usdhc3_1: usdhc3grp-1 { fsl,pins = < - 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ - 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ - 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ - 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ - 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ - 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ - 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ - 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ - 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ - 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; pinctrl_usdhc3_2: usdhc3grp-2 { fsl,pins = < - 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ - 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ - 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ - 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ - 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ - 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059 >; }; }; @@ -257,27 +301,27 @@ usdhc4 { pinctrl_usdhc4_1: usdhc4grp-1 { fsl,pins = < - 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ - 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ - 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ - 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ - 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ - 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ - 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ - 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ - 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ - 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x17059 >; }; pinctrl_usdhc4_2: usdhc4grp-2 { fsl,pins = < - 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ - 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ - 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ - 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ - 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ - 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059 >; }; }; @@ -291,6 +335,24 @@ interrupts = <0 8 0x4 0 7 0x4>; clocks = <&clks 133>, <&clks 134>, <&clks 137>; clock-names = "bus", "di0", "di1"; + resets = <&src 4>; }; }; }; + +&ldb { + clocks = <&clks 33>, <&clks 34>, + <&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>, + <&clks 135>, <&clks 136>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", "di2_sel", "di3_sel", + "di0", "di1"; + + lvds-channel@0 { + crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; + }; + + lvds-channel@1 { + crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi new file mode 100644 index 000000000000..4d237cffcc41 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -0,0 +1,38 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio6 15 0>; + wp-gpios = <&gpio1 13 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi new file mode 100644 index 000000000000..e21f6a89cf0f --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -0,0 +1,87 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 4 0>; + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 5 0>; + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_2>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; + cd-gpios = <&gpio2 2 0>; + wp-gpios = <&gpio2 3 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 06ec460b4581..3cca7d39529d 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -10,7 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { aliases { @@ -91,6 +91,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; + clocks = <&clks 15>; }; L2: l2-cache@00a02000 { @@ -101,6 +102,11 @@ cache-level = <2>; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 94 0x04>; + }; + aips-bus@02000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -277,6 +283,8 @@ compatible = "fsl,imx6q-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 0x04>; + clocks = <&clks 119>, <&clks 120>; + clock-names = "ipg", "per"; }; gpio1: gpio@0209c000 { @@ -513,9 +521,10 @@ }; src: src@020d8000 { - compatible = "fsl,imx6q-src"; + compatible = "fsl,imx6q-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; + #reset-cells = <1>; }; gpc: gpc@020dc000 { @@ -529,6 +538,26 @@ reg = <0x020e0000 0x38>; }; + ldb: ldb@020e0008 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; + gpr = <&gpr>; + status = "disabled"; + + lvds-channel@0 { + reg = <0>; + crtcs = <&ipu1 0>; + status = "disabled"; + }; + + lvds-channel@1 { + reg = <1>; + crtcs = <&ipu1 1>; + status = "disabled"; + }; + }; + dcic1: dcic@020e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 0x04>; @@ -795,6 +824,7 @@ interrupts = <0 6 0x4 0 5 0x4>; clocks = <&clks 130>, <&clks 131>, <&clks 132>; clock-names = "bus", "di0", "di1"; + resets = <&src 2>; }; }; }; diff --git a/arch/arm/boot/dts/imx6sl-pinfunc.h b/arch/arm/boot/dts/imx6sl-pinfunc.h new file mode 100644 index 000000000000..77b17bcc7b70 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-pinfunc.h @@ -0,0 +1,1077 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6SL_PINFUNC_H +#define __DTS_IMX6SL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0 +#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0 +#define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0 +#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0 +#define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0 +#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x050 0x2a8 0x80c 0x2 0x0 +#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK 0x050 0x2a8 0x70c 0x3 0x0 +#define MX6SL_PAD_AUD_RXC__I2C3_SDA 0x050 0x2a8 0x730 0x4 0x0 +#define MX6SL_PAD_AUD_RXC__GPIO1_IO01 0x050 0x2a8 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1 0x050 0x2a8 0x6c4 0x6 0x0 +#define MX6SL_PAD_AUD_RXD__AUD3_RXD 0x054 0x2ac 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI 0x054 0x2ac 0x6bc 0x1 0x0 +#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA 0x054 0x2ac 0x814 0x2 0x0 +#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA 0x054 0x2ac 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_RXD__FEC_RX_ER 0x054 0x2ac 0x708 0x3 0x0 +#define MX6SL_PAD_AUD_RXD__SD1_LCTL 0x054 0x2ac 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_RXD__GPIO1_IO02 0x054 0x2ac 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS 0x058 0x2b0 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_RXFS__I2C1_SCL 0x058 0x2b0 0x71c 0x1 0x0 +#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA 0x058 0x2b0 0x80c 0x2 0x1 +#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA 0x058 0x2b0 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_RXFS__FEC_MDIO 0x058 0x2b0 0x6f4 0x3 0x0 +#define MX6SL_PAD_AUD_RXFS__I2C3_SCL 0x058 0x2b0 0x72c 0x4 0x0 +#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00 0x058 0x2b0 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0 0x058 0x2b0 0x6c0 0x6 0x0 +#define MX6SL_PAD_AUD_TXC__AUD3_TXC 0x05c 0x2b4 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO 0x05c 0x2b4 0x6b8 0x1 0x0 +#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA 0x05c 0x2b4 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA 0x05c 0x2b4 0x814 0x2 0x1 +#define MX6SL_PAD_AUD_TXC__FEC_RX_DV 0x05c 0x2b4 0x704 0x3 0x0 +#define MX6SL_PAD_AUD_TXC__SD2_LCTL 0x05c 0x2b4 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_TXC__GPIO1_IO03 0x05c 0x2b4 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_TXD__AUD3_TXD 0x060 0x2b8 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK 0x060 0x2b8 0x6b0 0x1 0x0 +#define MX6SL_PAD_AUD_TXD__UART4_CTS_B 0x060 0x2b8 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_TXD__UART4_RTS_B 0x060 0x2b8 0x810 0x2 0x0 +#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0 0x060 0x2b8 0x000 0x3 0x0 +#define MX6SL_PAD_AUD_TXD__SD4_LCTL 0x060 0x2b8 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_TXD__GPIO1_IO05 0x060 0x2b8 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x064 0x2bc 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_TXFS__PWM3_OUT 0x064 0x2bc 0x000 0x1 0x0 +#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B 0x064 0x2bc 0x810 0x2 0x1 +#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B 0x064 0x2bc 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1 0x064 0x2bc 0x6fc 0x3 0x0 +#define MX6SL_PAD_AUD_TXFS__SD3_LCTL 0x064 0x2bc 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04 0x064 0x2bc 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x068 0x358 0x684 0x0 0x0 +#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS 0x068 0x358 0x5f8 0x1 0x0 +#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x068 0x358 0x818 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B 0x068 0x358 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0 0x068 0x358 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_MISO__SD2_WP 0x068 0x358 0x834 0x4 0x0 +#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10 0x068 0x358 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x06c 0x35c 0x688 0x0 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC 0x06c 0x35c 0x5f4 0x1 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x06c 0x35c 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA 0x06c 0x35c 0x81c 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x06c 0x35c 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x06c 0x35c 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x06c 0x35c 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x070 0x360 0x67c 0x0 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD 0x070 0x360 0x5e8 0x1 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x070 0x360 0x81c 0x2 0x1 +#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA 0x070 0x360 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x070 0x360 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET 0x070 0x360 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x070 0x360 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x070 0x360 0x820 0x6 0x0 +#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x074 0x364 0x68c 0x0 0x0 +#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD 0x074 0x364 0x5e4 0x1 0x0 +#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x074 0x364 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B 0x074 0x364 0x818 0x2 0x1 +#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1 0x074 0x364 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B 0x074 0x364 0x830 0x4 0x0 +#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x074 0x364 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x074 0x364 0x000 0x6 0x0 +#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x078 0x368 0x6a0 0x0 0x0 +#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x078 0x368 0x000 0x1 0x0 +#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B 0x078 0x368 0x808 0x2 0x0 +#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B 0x078 0x368 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK 0x078 0x368 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI2_MISO__SD1_WP 0x078 0x368 0x82c 0x4 0x0 +#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x078 0x368 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x078 0x368 0x824 0x6 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x07c 0x36c 0x6a4 0x0 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x07c 0x36c 0x000 0x1 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA 0x07c 0x36c 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA 0x07c 0x36c 0x80c 0x2 0x2 +#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x07c 0x36c 0x670 0x3 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x07c 0x36c 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x07c 0x36c 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x080 0x370 0x69c 0x0 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x080 0x370 0x7f4 0x1 0x1 +#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA 0x080 0x370 0x80c 0x2 0x3 +#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA 0x080 0x370 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x080 0x370 0x674 0x3 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET 0x080 0x370 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x080 0x370 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x080 0x370 0x820 0x6 0x1 +#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x084 0x374 0x6a8 0x0 0x0 +#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x084 0x374 0x698 0x1 0x0 +#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B 0x084 0x374 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B 0x084 0x374 0x808 0x2 0x1 +#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC 0x084 0x374 0x678 0x3 0x0 +#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B 0x084 0x374 0x828 0x4 0x0 +#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x084 0x374 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x084 0x374 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0 0x088 0x378 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_BDR0__SD4_CLK 0x088 0x378 0x850 0x1 0x0 +#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B 0x088 0x378 0x808 0x2 0x2 +#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B 0x088 0x378 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26 0x088 0x378 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_BDR0__SPDC_RL 0x088 0x378 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05 0x088 0x378 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7 0x088 0x378 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1 0x08c 0x37c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_BDR1__SD4_CMD 0x08c 0x37c 0x858 0x1 0x0 +#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B 0x08c 0x37c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B 0x08c 0x37c 0x808 0x2 0x3 +#define MX6SL_PAD_EPDC_BDR1__EIM_CRE 0x08c 0x37c 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_BDR1__SPDC_UD 0x08c 0x37c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06 0x08c 0x37c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8 0x08c 0x37c 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_D0__EPDC_DATA00 0x090 0x380 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI 0x090 0x380 0x6d8 0x1 0x0 +#define MX6SL_PAD_EPDC_D0__LCD_DATA24 0x090 0x380 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D0__CSI_DATA00 0x090 0x380 0x630 0x3 0x0 +#define MX6SL_PAD_EPDC_D0__SPDC_DATA00 0x090 0x380 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D0__GPIO1_IO07 0x090 0x380 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D1__EPDC_DATA01 0x094 0x384 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO 0x094 0x384 0x6d4 0x1 0x0 +#define MX6SL_PAD_EPDC_D1__LCD_DATA25 0x094 0x384 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D1__CSI_DATA01 0x094 0x384 0x634 0x3 0x0 +#define MX6SL_PAD_EPDC_D1__SPDC_DATA01 0x094 0x384 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D1__GPIO1_IO08 0x094 0x384 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D10__EPDC_DATA10 0x098 0x388 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0 0x098 0x388 0x6c0 0x1 0x1 +#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2 0x098 0x388 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D10__EIM_ADDR18 0x098 0x388 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D10__SPDC_DATA10 0x098 0x388 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D10__GPIO1_IO17 0x098 0x388 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D10__SD4_WP 0x098 0x388 0x87c 0x6 0x0 +#define MX6SL_PAD_EPDC_D11__EPDC_DATA11 0x09c 0x38c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK 0x09c 0x38c 0x6b0 0x1 0x1 +#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3 0x09c 0x38c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D11__EIM_ADDR19 0x09c 0x38c 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D11__SPDC_DATA11 0x09c 0x38c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D11__GPIO1_IO18 0x09c 0x38c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D11__SD4_CD_B 0x09c 0x38c 0x854 0x6 0x0 +#define MX6SL_PAD_EPDC_D12__EPDC_DATA12 0x0a0 0x390 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x0a0 0x390 0x804 0x1 0x0 +#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA 0x0a0 0x390 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM 0x0a0 0x390 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D12__EIM_ADDR20 0x0a0 0x390 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D12__SPDC_DATA12 0x0a0 0x390 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D12__GPIO1_IO19 0x0a0 0x390 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1 0x0a0 0x390 0x6c4 0x6 0x1 +#define MX6SL_PAD_EPDC_D13__EPDC_DATA13 0x0a4 0x394 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x0a4 0x394 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA 0x0a4 0x394 0x804 0x1 0x1 +#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ 0x0a4 0x394 0x6e8 0x2 0x0 +#define MX6SL_PAD_EPDC_D13__EIM_ADDR21 0x0a4 0x394 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D13__SPDC_DATA13 0x0a4 0x394 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D13__GPIO1_IO20 0x0a4 0x394 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2 0x0a4 0x394 0x6c8 0x6 0x0 +#define MX6SL_PAD_EPDC_D14__EPDC_DATA14 0x0a8 0x398 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x0a8 0x398 0x800 0x1 0x0 +#define MX6SL_PAD_EPDC_D14__UART2_CTS_B 0x0a8 0x398 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT 0x0a8 0x398 0x6ec 0x2 0x0 +#define MX6SL_PAD_EPDC_D14__EIM_ADDR22 0x0a8 0x398 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D14__SPDC_DATA14 0x0a8 0x398 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D14__GPIO1_IO21 0x0a8 0x398 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3 0x0a8 0x398 0x6cc 0x6 0x0 +#define MX6SL_PAD_EPDC_D15__EPDC_DATA15 0x0ac 0x39c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x0ac 0x39c 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D15__UART2_RTS_B 0x0ac 0x39c 0x800 0x1 0x1 +#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE 0x0ac 0x39c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D15__EIM_ADDR23 0x0ac 0x39c 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D15__SPDC_DATA15 0x0ac 0x39c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D15__GPIO1_IO22 0x0ac 0x39c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY 0x0ac 0x39c 0x6b4 0x6 0x1 +#define MX6SL_PAD_EPDC_D2__EPDC_DATA02 0x0b0 0x3a0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0 0x0b0 0x3a0 0x6dc 0x1 0x0 +#define MX6SL_PAD_EPDC_D2__LCD_DATA26 0x0b0 0x3a0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D2__CSI_DATA02 0x0b0 0x3a0 0x638 0x3 0x0 +#define MX6SL_PAD_EPDC_D2__SPDC_DATA02 0x0b0 0x3a0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D2__GPIO1_IO09 0x0b0 0x3a0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D3__EPDC_DATA03 0x0b4 0x3a4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK 0x0b4 0x3a4 0x6d0 0x1 0x0 +#define MX6SL_PAD_EPDC_D3__LCD_DATA27 0x0b4 0x3a4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D3__CSI_DATA03 0x0b4 0x3a4 0x63c 0x3 0x0 +#define MX6SL_PAD_EPDC_D3__SPDC_DATA03 0x0b4 0x3a4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D3__GPIO1_IO10 0x0b4 0x3a4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D4__EPDC_DATA04 0x0b8 0x3a8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1 0x0b8 0x3a8 0x6e0 0x1 0x0 +#define MX6SL_PAD_EPDC_D4__LCD_DATA28 0x0b8 0x3a8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D4__CSI_DATA04 0x0b8 0x3a8 0x640 0x3 0x0 +#define MX6SL_PAD_EPDC_D4__SPDC_DATA04 0x0b8 0x3a8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D4__GPIO1_IO11 0x0b8 0x3a8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D5__EPDC_DATA05 0x0bc 0x3ac 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2 0x0bc 0x3ac 0x6e4 0x1 0x0 +#define MX6SL_PAD_EPDC_D5__LCD_DATA29 0x0bc 0x3ac 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D5__CSI_DATA05 0x0bc 0x3ac 0x644 0x3 0x0 +#define MX6SL_PAD_EPDC_D5__SPDC_DATA05 0x0bc 0x3ac 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D5__GPIO1_IO12 0x0bc 0x3ac 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D6__EPDC_DATA06 0x0c0 0x3b0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3 0x0c0 0x3b0 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D6__LCD_DATA30 0x0c0 0x3b0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D6__CSI_DATA06 0x0c0 0x3b0 0x648 0x3 0x0 +#define MX6SL_PAD_EPDC_D6__SPDC_DATA06 0x0c0 0x3b0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D6__GPIO1_IO13 0x0c0 0x3b0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D7__EPDC_DATA07 0x0c4 0x3b4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY 0x0c4 0x3b4 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D7__LCD_DATA31 0x0c4 0x3b4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D7__CSI_DATA07 0x0c4 0x3b4 0x64c 0x3 0x0 +#define MX6SL_PAD_EPDC_D7__SPDC_DATA07 0x0c4 0x3b4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D7__GPIO1_IO14 0x0c4 0x3b4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D8__EPDC_DATA08 0x0c8 0x3b8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI 0x0c8 0x3b8 0x6bc 0x1 0x1 +#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0 0x0c8 0x3b8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D8__EIM_ADDR16 0x0c8 0x3b8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D8__SPDC_DATA08 0x0c8 0x3b8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D8__GPIO1_IO15 0x0c8 0x3b8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D8__SD4_RESET 0x0c8 0x3b8 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_D9__EPDC_DATA09 0x0cc 0x3bc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO 0x0cc 0x3bc 0x6b8 0x1 0x1 +#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1 0x0cc 0x3bc 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D9__EIM_ADDR17 0x0cc 0x3bc 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D9__SPDC_DATA09 0x0cc 0x3bc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D9__GPIO1_IO16 0x0cc 0x3bc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D9__SD4_VSELECT 0x0cc 0x3bc 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x0d0 0x3c0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x0d0 0x3c0 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR 0x0d0 0x3c0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x0d0 0x3c0 0x674 0x3 0x1 +#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL 0x0d0 0x3c0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31 0x0d0 0x3c0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET 0x0d0 0x3c0 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE 0x0d4 0x3c4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3 0x0d4 0x3c4 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER 0x0d4 0x3c4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC 0x0d4 0x3c4 0x670 0x3 0x1 +#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL 0x0d4 0x3c4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00 0x0d4 0x3c4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT 0x0d4 0x3c4 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL 0x0d8 0x3c8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY 0x0d8 0x3c8 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR 0x0d8 0x3c8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK 0x0d8 0x3c8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL 0x0d8 0x3c8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01 0x0d8 0x3c8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDRL__SD2_WP 0x0d8 0x3c8 0x834 0x6 0x1 +#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP 0x0dc 0x3cc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT 0x0dc 0x3cc 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR 0x0dc 0x3cc 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC 0x0dc 0x3cc 0x678 0x3 0x1 +#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL 0x0dc 0x3cc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02 0x0dc 0x3cc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B 0x0dc 0x3cc 0x830 0x6 0x1 +#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM 0x0e0 0x3d0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0 0x0e0 0x3d0 0x85c 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20 0x0e0 0x3d0 0x7c8 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK 0x0e0 0x3d0 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x0e0 0x3d0 0x5dc 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11 0x0e0 0x3d0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET 0x0e0 0x3d0 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0 0x0e4 0x3d4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC 0x0e4 0x3d4 0x604 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16 0x0e4 0x3d4 0x7b8 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW 0x0e4 0x3d4 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL 0x0e4 0x3d4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x0e4 0x3d4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET 0x0e4 0x3d4 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1 0x0e8 0x3d8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS 0x0e8 0x3d8 0x610 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17 0x0e8 0x3d8 0x7bc 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B 0x0e8 0x3d8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL 0x0e8 0x3d8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08 0x0e8 0x3d8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT 0x0e8 0x3d8 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2 0x0ec 0x3dc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD 0x0ec 0x3dc 0x600 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18 0x0ec 0x3dc 0x7c0 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B 0x0ec 0x3dc 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL 0x0ec 0x3dc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x0ec 0x3dc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP 0x0ec 0x3dc 0x87c 0x6 0x1 +#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3 0x0f0 0x3e0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC 0x0f0 0x3e0 0x60c 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19 0x0f0 0x3e0 0x7c4 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B 0x0f0 0x3e0 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL 0x0f0 0x3e0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x0f0 0x3e0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B 0x0f0 0x3e0 0x854 0x6 0x1 +#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ 0x0f4 0x3e4 0x6e8 0x0 0x1 +#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1 0x0f4 0x3e4 0x860 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21 0x0f4 0x3e4 0x7cc 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN 0x0f4 0x3e4 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID 0x0f4 0x3e4 0x5e0 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12 0x0f4 0x3e4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT 0x0f4 0x3e4 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT 0x0f8 0x3e8 0x6ec 0x0 0x1 +#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2 0x0f8 0x3e8 0x864 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22 0x0f8 0x3e8 0x7d0 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B 0x0f8 0x3e8 0x884 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI 0x0f8 0x3e8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x0f8 0x3e8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP 0x0f8 0x3e8 0x84c 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE 0x0fc 0x3ec 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3 0x0fc 0x3ec 0x868 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23 0x0fc 0x3ec 0x7d4 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B 0x0fc 0x3ec 0x880 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO 0x0fc 0x3ec 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x0fc 0x3ec 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B 0x0fc 0x3ec 0x838 0x6 0x0 +#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x100 0x3f0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x100 0x3f0 0x6ac 0x1 0x0 +#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT 0x100 0x3f0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B 0x100 0x3f0 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR 0x100 0x3f0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27 0x100 0x3f0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x104 0x3f4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B 0x104 0x3f4 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT 0x104 0x3f4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B 0x104 0x3f4 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER 0x104 0x3f4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28 0x104 0x3f4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x108 0x3f8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL 0x108 0x3f8 0x72c 0x1 0x1 +#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT 0x108 0x3f8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B 0x108 0x3f8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR 0x108 0x3f8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x108 0x3f8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x10c 0x3fc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA 0x10c 0x3fc 0x730 0x1 0x1 +#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT 0x10c 0x3fc 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B 0x10c 0x3fc 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR 0x10c 0x3fc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30 0x10c 0x3fc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x110 0x400 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x110 0x400 0x6a4 0x1 0x1 +#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL 0x110 0x400 0x724 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08 0x110 0x400 0x650 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL 0x110 0x400 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23 0x110 0x400 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE 0x114 0x404 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO 0x114 0x404 0x6a0 0x1 0x1 +#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA 0x114 0x404 0x728 0x2 0x0 +#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09 0x114 0x404 0x654 0x3 0x0 +#define MX6SL_PAD_EPDC_SDLE__SPDC_LD 0x114 0x404 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24 0x114 0x404 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE 0x118 0x408 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0 0x118 0x408 0x6a8 0x1 0x1 +#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR 0x118 0x408 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10 0x118 0x408 0x658 0x3 0x0 +#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL 0x118 0x408 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25 0x118 0x408 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x11c 0x40c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x11c 0x40c 0x69c 0x1 0x1 +#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x11c 0x40c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11 0x11c 0x40c 0x65c 0x3 0x0 +#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR 0x11c 0x40c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26 0x11c 0x40c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x120 0x410 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS 0x120 0x410 0x608 0x1 0x0 +#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA 0x120 0x410 0x80c 0x2 0x4 +#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA 0x120 0x410 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24 0x120 0x410 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0 0x120 0x410 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x120 0x410 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x120 0x410 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x124 0x414 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD 0x124 0x414 0x5fc 0x1 0x0 +#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA 0x124 0x414 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA 0x124 0x414 0x80c 0x2 0x5 +#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25 0x124 0x414 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1 0x124 0x414 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04 0x124 0x414 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x124 0x414 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x128 0x418 0x704 0x0 0x1 +#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x128 0x418 0x860 0x1 0x1 +#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC 0x128 0x418 0x624 0x2 0x0 +#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO 0x128 0x418 0x6d4 0x3 0x1 +#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2 0x128 0x418 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x128 0x418 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31 0x128 0x418 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_MDC__FEC_MDC 0x12c 0x41c 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_MDC__SD4_DATA4 0x12c 0x41c 0x86c 0x1 0x0 +#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT 0x12c 0x41c 0x000 0x2 0x0 +#define MX6SL_PAD_FEC_MDC__SD1_RESET 0x12c 0x41c 0x000 0x3 0x0 +#define MX6SL_PAD_FEC_MDC__SD3_RESET 0x12c 0x41c 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x12c 0x41c 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_MDC__ARM_TRACE29 0x12c 0x41c 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x130 0x420 0x6f4 0x0 0x1 +#define MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130 0x420 0x850 0x1 0x1 +#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS 0x130 0x420 0x620 0x2 0x0 +#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0 0x130 0x420 0x6dc 0x3 0x1 +#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1 0x130 0x420 0x710 0x4 0x0 +#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x130 0x420 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26 0x130 0x420 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x134 0x424 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x134 0x424 0x000 0x1 0x0 +#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B 0x134 0x424 0x000 0x2 0x0 +#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT 0x134 0x424 0x000 0x3 0x0 +#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY 0x134 0x424 0x62c 0x4 0x0 +#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x134 0x424 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK 0x134 0x424 0x7f4 0x6 0x2 +#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER 0x138 0x428 0x708 0x0 0x1 +#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x138 0x428 0x85c 0x1 0x1 +#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD 0x138 0x428 0x614 0x2 0x0 +#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI 0x138 0x428 0x6d8 0x3 0x1 +#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1 0x138 0x428 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x138 0x428 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25 0x138 0x428 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x13c 0x42c 0x6f8 0x0 0x0 +#define MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x13c 0x42c 0x870 0x1 0x0 +#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x13c 0x42c 0x5dc 0x2 0x1 +#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT 0x13c 0x42c 0x000 0x3 0x0 +#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT 0x13c 0x42c 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x13c 0x42c 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24 0x13c 0x42c 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x140 0x430 0x6fc 0x0 0x1 +#define MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x140 0x430 0x864 0x1 0x1 +#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS 0x140 0x430 0x628 0x2 0x0 +#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1 0x140 0x430 0x6e0 0x3 0x1 +#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3 0x140 0x430 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x140 0x430 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_RXD1__FEC_COL 0x140 0x430 0x6f0 0x6 0x0 +#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK 0x144 0x434 0x70c 0x0 0x1 +#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x144 0x434 0x858 0x1 0x1 +#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC 0x144 0x434 0x61c 0x2 0x0 +#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK 0x144 0x434 0x6d0 0x3 0x1 +#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2 0x144 0x434 0x714 0x4 0x0 +#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x144 0x434 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27 0x144 0x434 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x148 0x438 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x148 0x438 0x874 0x1 0x0 +#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN 0x148 0x438 0x7f0 0x2 0x0 +#define MX6SL_PAD_FEC_TX_EN__SD1_WP 0x148 0x438 0x82c 0x3 0x1 +#define MX6SL_PAD_FEC_TX_EN__SD3_WP 0x148 0x438 0x84c 0x4 0x1 +#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x148 0x438 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28 0x148 0x438 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x14c 0x43c 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x14c 0x43c 0x868 0x1 0x1 +#define MX6SL_PAD_FEC_TXD0__AUD6_TXD 0x14c 0x43c 0x618 0x2 0x0 +#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2 0x14c 0x43c 0x6e4 0x3 0x1 +#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN 0x14c 0x43c 0x718 0x4 0x0 +#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x14c 0x43c 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30 0x14c 0x43c 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x150 0x440 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x150 0x440 0x878 0x1 0x0 +#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT 0x150 0x440 0x000 0x2 0x0 +#define MX6SL_PAD_FEC_TXD1__SD1_CD_B 0x150 0x440 0x828 0x3 0x1 +#define MX6SL_PAD_FEC_TXD1__SD3_CD_B 0x150 0x440 0x838 0x4 0x1 +#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x150 0x440 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK 0x150 0x440 0x700 0x6 0x0 +#define MX6SL_PAD_HSIC_DAT__USB_H_DATA 0x154 0x444 0x000 0x0 0x0 +#define MX6SL_PAD_HSIC_DAT__I2C1_SCL 0x154 0x444 0x71c 0x1 0x1 +#define MX6SL_PAD_HSIC_DAT__PWM1_OUT 0x154 0x444 0x000 0x2 0x0 +#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M 0x154 0x444 0x000 0x3 0x0 +#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19 0x154 0x444 0x000 0x5 0x0 +#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE 0x158 0x448 0x000 0x0 0x0 +#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA 0x158 0x448 0x720 0x1 0x1 +#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT 0x158 0x448 0x000 0x2 0x0 +#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0 +#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x158 0x448 0x000 0x5 0x0 +#define MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x15c 0x44c 0x71c 0x0 0x2 +#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B 0x15c 0x44c 0x7f8 0x1 0x0 +#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B 0x15c 0x44c 0x000 0x1 0x0 +#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2 0x15c 0x44c 0x6c8 0x2 0x1 +#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0 0x15c 0x44c 0x6f8 0x3 0x1 +#define MX6SL_PAD_I2C1_SCL__SD3_RESET 0x15c 0x44c 0x000 0x4 0x0 +#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12 0x15c 0x44c 0x000 0x5 0x0 +#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1 0x15c 0x44c 0x690 0x6 0x0 +#define MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x160 0x450 0x720 0x0 0x2 +#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B 0x160 0x450 0x000 0x1 0x0 +#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B 0x160 0x450 0x7f8 0x1 0x1 +#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3 0x160 0x450 0x6cc 0x2 0x1 +#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN 0x160 0x450 0x000 0x3 0x0 +#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT 0x160 0x450 0x000 0x4 0x0 +#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13 0x160 0x450 0x000 0x5 0x0 +#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2 0x160 0x450 0x694 0x6 0x0 +#define MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x164 0x454 0x724 0x0 0x1 +#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS 0x164 0x454 0x5f0 0x1 0x0 +#define MX6SL_PAD_I2C2_SCL__SPDIF_IN 0x164 0x454 0x7f0 0x2 0x1 +#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1 0x164 0x454 0x000 0x3 0x0 +#define MX6SL_PAD_I2C2_SCL__SD3_WP 0x164 0x454 0x84c 0x4 0x2 +#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14 0x164 0x454 0x000 0x5 0x0 +#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY 0x164 0x454 0x680 0x6 0x0 +#define MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x168 0x458 0x728 0x0 0x1 +#define MX6SL_PAD_I2C2_SDA__AUD4_RXC 0x168 0x458 0x5ec 0x1 0x0 +#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT 0x168 0x458 0x000 0x2 0x0 +#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT 0x168 0x458 0x000 0x3 0x0 +#define MX6SL_PAD_I2C2_SDA__SD3_CD_B 0x168 0x458 0x838 0x4 0x2 +#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15 0x168 0x458 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL0__KEY_COL0 0x16c 0x474 0x734 0x0 0x0 +#define MX6SL_PAD_KEY_COL0__I2C2_SCL 0x16c 0x474 0x724 0x1 0x2 +#define MX6SL_PAD_KEY_COL0__LCD_DATA00 0x16c 0x474 0x778 0x2 0x0 +#define MX6SL_PAD_KEY_COL0__EIM_AD00 0x16c 0x474 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL0__SD1_CD_B 0x16c 0x474 0x828 0x4 0x2 +#define MX6SL_PAD_KEY_COL0__GPIO3_IO24 0x16c 0x474 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL1__KEY_COL1 0x170 0x478 0x738 0x0 0x0 +#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI 0x170 0x478 0x6d8 0x1 0x2 +#define MX6SL_PAD_KEY_COL1__LCD_DATA02 0x170 0x478 0x780 0x2 0x0 +#define MX6SL_PAD_KEY_COL1__EIM_AD02 0x170 0x478 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL1__SD3_DATA4 0x170 0x478 0x83c 0x4 0x0 +#define MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x170 0x478 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL2__KEY_COL2 0x174 0x47c 0x73c 0x0 0x0 +#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0 0x174 0x47c 0x6dc 0x1 0x2 +#define MX6SL_PAD_KEY_COL2__LCD_DATA04 0x174 0x47c 0x788 0x2 0x0 +#define MX6SL_PAD_KEY_COL2__EIM_AD04 0x174 0x47c 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL2__SD3_DATA6 0x174 0x47c 0x844 0x4 0x0 +#define MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x174 0x47c 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL3__KEY_COL3 0x178 0x480 0x740 0x0 0x0 +#define MX6SL_PAD_KEY_COL3__AUD6_RXFS 0x178 0x480 0x620 0x1 0x1 +#define MX6SL_PAD_KEY_COL3__LCD_DATA06 0x178 0x480 0x790 0x2 0x0 +#define MX6SL_PAD_KEY_COL3__EIM_AD06 0x178 0x480 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL3__SD4_DATA6 0x178 0x480 0x874 0x4 0x1 +#define MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x178 0x480 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL3__SD1_RESET 0x178 0x480 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL4__KEY_COL4 0x17c 0x484 0x744 0x0 0x0 +#define MX6SL_PAD_KEY_COL4__AUD6_RXD 0x17c 0x484 0x614 0x1 0x1 +#define MX6SL_PAD_KEY_COL4__LCD_DATA08 0x17c 0x484 0x798 0x2 0x0 +#define MX6SL_PAD_KEY_COL4__EIM_AD08 0x17c 0x484 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL4__SD4_CLK 0x17c 0x484 0x850 0x4 0x2 +#define MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x17c 0x484 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR 0x17c 0x484 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL5__KEY_COL5 0x180 0x488 0x748 0x0 0x0 +#define MX6SL_PAD_KEY_COL5__AUD6_TXFS 0x180 0x488 0x628 0x1 0x1 +#define MX6SL_PAD_KEY_COL5__LCD_DATA10 0x180 0x488 0x7a0 0x2 0x0 +#define MX6SL_PAD_KEY_COL5__EIM_AD10 0x180 0x488 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL5__SD4_DATA0 0x180 0x488 0x85c 0x4 0x2 +#define MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x180 0x488 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR 0x180 0x488 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL6__KEY_COL6 0x184 0x48c 0x74c 0x0 0x0 +#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x184 0x48c 0x814 0x1 0x2 +#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA 0x184 0x48c 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_COL6__LCD_DATA12 0x184 0x48c 0x7a8 0x2 0x0 +#define MX6SL_PAD_KEY_COL6__EIM_AD12 0x184 0x48c 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL6__SD4_DATA2 0x184 0x48c 0x864 0x4 0x2 +#define MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x184 0x48c 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL6__SD3_RESET 0x184 0x48c 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL7__KEY_COL7 0x188 0x490 0x750 0x0 0x0 +#define MX6SL_PAD_KEY_COL7__UART4_RTS_B 0x188 0x490 0x810 0x1 0x2 +#define MX6SL_PAD_KEY_COL7__UART4_CTS_B 0x188 0x490 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_COL7__LCD_DATA14 0x188 0x490 0x7b0 0x2 0x0 +#define MX6SL_PAD_KEY_COL7__EIM_AD14 0x188 0x490 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL7__SD4_DATA4 0x188 0x490 0x86c 0x4 0x1 +#define MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x188 0x490 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL7__SD1_WP 0x188 0x490 0x82c 0x6 0x2 +#define MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x18c 0x494 0x754 0x0 0x0 +#define MX6SL_PAD_KEY_ROW0__I2C2_SDA 0x18c 0x494 0x728 0x1 0x2 +#define MX6SL_PAD_KEY_ROW0__LCD_DATA01 0x18c 0x494 0x77c 0x2 0x0 +#define MX6SL_PAD_KEY_ROW0__EIM_AD01 0x18c 0x494 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW0__SD1_WP 0x18c 0x494 0x82c 0x4 0x3 +#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25 0x18c 0x494 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x190 0x498 0x758 0x0 0x0 +#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO 0x190 0x498 0x6d4 0x1 0x2 +#define MX6SL_PAD_KEY_ROW1__LCD_DATA03 0x190 0x498 0x784 0x2 0x0 +#define MX6SL_PAD_KEY_ROW1__EIM_AD03 0x190 0x498 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW1__SD3_DATA5 0x190 0x498 0x840 0x4 0x0 +#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27 0x190 0x498 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x194 0x49c 0x75c 0x0 0x0 +#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK 0x194 0x49c 0x6d0 0x1 0x2 +#define MX6SL_PAD_KEY_ROW2__LCD_DATA05 0x194 0x49c 0x78c 0x2 0x0 +#define MX6SL_PAD_KEY_ROW2__EIM_AD05 0x194 0x49c 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW2__SD3_DATA7 0x194 0x49c 0x848 0x4 0x0 +#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29 0x194 0x49c 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW3__KEY_ROW3 0x198 0x4a0 0x760 0x0 0x0 +#define MX6SL_PAD_KEY_ROW3__AUD6_RXC 0x198 0x4a0 0x61c 0x1 0x1 +#define MX6SL_PAD_KEY_ROW3__LCD_DATA07 0x198 0x4a0 0x794 0x2 0x0 +#define MX6SL_PAD_KEY_ROW3__EIM_AD07 0x198 0x4a0 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW3__SD4_DATA7 0x198 0x4a0 0x878 0x4 0x1 +#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31 0x198 0x4a0 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT 0x198 0x4a0 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_ROW4__KEY_ROW4 0x19c 0x4a4 0x764 0x0 0x0 +#define MX6SL_PAD_KEY_ROW4__AUD6_TXC 0x19c 0x4a4 0x624 0x1 0x1 +#define MX6SL_PAD_KEY_ROW4__LCD_DATA09 0x19c 0x4a4 0x79c 0x2 0x0 +#define MX6SL_PAD_KEY_ROW4__EIM_AD09 0x19c 0x4a4 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW4__SD4_CMD 0x19c 0x4a4 0x858 0x4 0x2 +#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01 0x19c 0x4a4 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC 0x19c 0x4a4 0x824 0x6 0x1 +#define MX6SL_PAD_KEY_ROW5__KEY_ROW5 0x1a0 0x4a8 0x768 0x0 0x0 +#define MX6SL_PAD_KEY_ROW5__AUD6_TXD 0x1a0 0x4a8 0x618 0x1 0x1 +#define MX6SL_PAD_KEY_ROW5__LCD_DATA11 0x1a0 0x4a8 0x7a4 0x2 0x0 +#define MX6SL_PAD_KEY_ROW5__EIM_AD11 0x1a0 0x4a8 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW5__SD4_DATA1 0x1a0 0x4a8 0x860 0x4 0x2 +#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x1a0 0x4a8 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x1a0 0x4a8 0x820 0x6 0x2 +#define MX6SL_PAD_KEY_ROW6__KEY_ROW6 0x1a4 0x4ac 0x76c 0x0 0x0 +#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1a4 0x4ac 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA 0x1a4 0x4ac 0x814 0x1 0x3 +#define MX6SL_PAD_KEY_ROW6__LCD_DATA13 0x1a4 0x4ac 0x7ac 0x2 0x0 +#define MX6SL_PAD_KEY_ROW6__EIM_AD13 0x1a4 0x4ac 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW6__SD4_DATA3 0x1a4 0x4ac 0x868 0x4 0x2 +#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x1a4 0x4ac 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT 0x1a4 0x4ac 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_ROW7__KEY_ROW7 0x1a8 0x4b0 0x770 0x0 0x0 +#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B 0x1a8 0x4b0 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B 0x1a8 0x4b0 0x810 0x1 0x3 +#define MX6SL_PAD_KEY_ROW7__LCD_DATA15 0x1a8 0x4b0 0x7b4 0x2 0x0 +#define MX6SL_PAD_KEY_ROW7__EIM_AD15 0x1a8 0x4b0 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW7__SD4_DATA5 0x1a8 0x4b0 0x870 0x4 0x1 +#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x1a8 0x4b0 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW7__SD1_CD_B 0x1a8 0x4b0 0x828 0x6 0x3 +#define MX6SL_PAD_LCD_CLK__LCD_CLK 0x1ac 0x4b4 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_CLK__SD4_DATA4 0x1ac 0x4b4 0x86c 0x1 0x2 +#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN 0x1ac 0x4b4 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_CLK__EIM_RW 0x1ac 0x4b4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_CLK__PWM4_OUT 0x1ac 0x4b4 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x1ac 0x4b4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0 0x4b8 0x778 0x0 0x1 +#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI 0x1b0 0x4b8 0x688 0x1 0x1 +#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID 0x1b0 0x4b8 0x5e0 0x2 0x1 +#define MX6SL_PAD_LCD_DAT0__PWM1_OUT 0x1b0 0x4b8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B 0x1b0 0x4b8 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x1b0 0x4b8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00 0x1b0 0x4b8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00 0x1b0 0x4b8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b4 0x4bc 0x77c 0x0 0x1 +#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO 0x1b4 0x4bc 0x684 0x1 0x1 +#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x1b4 0x4bc 0x5dc 0x2 0x2 +#define MX6SL_PAD_LCD_DAT1__PWM2_OUT 0x1b4 0x4bc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS 0x1b4 0x4bc 0x5f0 0x4 0x1 +#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x1b4 0x4bc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01 0x1b4 0x4bc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01 0x1b4 0x4bc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b8 0x4c0 0x7a0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT10__KEY_COL1 0x1b8 0x4c0 0x738 0x1 0x1 +#define MX6SL_PAD_LCD_DAT10__CSI_DATA07 0x1b8 0x4c0 0x64c 0x2 0x1 +#define MX6SL_PAD_LCD_DAT10__EIM_DATA04 0x1b8 0x4c0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO 0x1b8 0x4c0 0x6a0 0x4 0x2 +#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x1b8 0x4c0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10 0x1b8 0x4c0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10 0x1b8 0x4c0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1bc 0x4c4 0x7a4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT11__KEY_ROW1 0x1bc 0x4c4 0x758 0x1 0x1 +#define MX6SL_PAD_LCD_DAT11__CSI_DATA06 0x1bc 0x4c4 0x648 0x2 0x1 +#define MX6SL_PAD_LCD_DAT11__EIM_DATA05 0x1bc 0x4c4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1 0x1bc 0x4c4 0x6ac 0x4 0x1 +#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x1bc 0x4c4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11 0x1bc 0x4c4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11 0x1bc 0x4c4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1c0 0x4c8 0x7a8 0x0 0x1 +#define MX6SL_PAD_LCD_DAT12__KEY_COL2 0x1c0 0x4c8 0x73c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT12__CSI_DATA05 0x1c0 0x4c8 0x644 0x2 0x1 +#define MX6SL_PAD_LCD_DAT12__EIM_DATA06 0x1c0 0x4c8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B 0x1c0 0x4c8 0x818 0x4 0x2 +#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B 0x1c0 0x4c8 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x1c0 0x4c8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12 0x1c0 0x4c8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12 0x1c0 0x4c8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1c4 0x4cc 0x7ac 0x0 0x1 +#define MX6SL_PAD_LCD_DAT13__KEY_ROW2 0x1c4 0x4cc 0x75c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT13__CSI_DATA04 0x1c4 0x4cc 0x640 0x2 0x1 +#define MX6SL_PAD_LCD_DAT13__EIM_DATA07 0x1c4 0x4cc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B 0x1c4 0x4cc 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B 0x1c4 0x4cc 0x818 0x4 0x3 +#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x1c4 0x4cc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13 0x1c4 0x4cc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13 0x1c4 0x4cc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1c8 0x4d0 0x7b0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT14__KEY_COL3 0x1c8 0x4d0 0x740 0x1 0x1 +#define MX6SL_PAD_LCD_DAT14__CSI_DATA03 0x1c8 0x4d0 0x63c 0x2 0x1 +#define MX6SL_PAD_LCD_DAT14__EIM_DATA08 0x1c8 0x4d0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA 0x1c8 0x4d0 0x81c 0x4 0x2 +#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA 0x1c8 0x4d0 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x1c8 0x4d0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14 0x1c8 0x4d0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14 0x1c8 0x4d0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1cc 0x4d4 0x7b4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT15__KEY_ROW3 0x1cc 0x4d4 0x760 0x1 0x1 +#define MX6SL_PAD_LCD_DAT15__CSI_DATA02 0x1cc 0x4d4 0x638 0x2 0x1 +#define MX6SL_PAD_LCD_DAT15__EIM_DATA09 0x1cc 0x4d4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA 0x1cc 0x4d4 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA 0x1cc 0x4d4 0x81c 0x4 0x3 +#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x1cc 0x4d4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15 0x1cc 0x4d4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15 0x1cc 0x4d4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1d0 0x4d8 0x7b8 0x0 0x1 +#define MX6SL_PAD_LCD_DAT16__KEY_COL4 0x1d0 0x4d8 0x744 0x1 0x1 +#define MX6SL_PAD_LCD_DAT16__CSI_DATA01 0x1d0 0x4d8 0x634 0x2 0x1 +#define MX6SL_PAD_LCD_DAT16__EIM_DATA10 0x1d0 0x4d8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT16__I2C2_SCL 0x1d0 0x4d8 0x724 0x4 0x3 +#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x1d0 0x4d8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16 0x1d0 0x4d8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24 0x1d0 0x4d8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1d4 0x4dc 0x7bc 0x0 0x1 +#define MX6SL_PAD_LCD_DAT17__KEY_ROW4 0x1d4 0x4dc 0x764 0x1 0x1 +#define MX6SL_PAD_LCD_DAT17__CSI_DATA00 0x1d4 0x4dc 0x630 0x2 0x1 +#define MX6SL_PAD_LCD_DAT17__EIM_DATA11 0x1d4 0x4dc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT17__I2C2_SDA 0x1d4 0x4dc 0x728 0x4 0x3 +#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x1d4 0x4dc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17 0x1d4 0x4dc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25 0x1d4 0x4dc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1d8 0x4e0 0x7c0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT18__KEY_COL5 0x1d8 0x4e0 0x748 0x1 0x1 +#define MX6SL_PAD_LCD_DAT18__CSI_DATA15 0x1d8 0x4e0 0x66c 0x2 0x0 +#define MX6SL_PAD_LCD_DAT18__EIM_DATA12 0x1d8 0x4e0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1 0x1d8 0x4e0 0x710 0x4 0x1 +#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x1d8 0x4e0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18 0x1d8 0x4e0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26 0x1d8 0x4e0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1dc 0x4e4 0x7c4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT19__KEY_ROW5 0x1dc 0x4e4 0x768 0x1 0x1 +#define MX6SL_PAD_LCD_DAT19__CSI_DATA14 0x1dc 0x4e4 0x668 0x2 0x0 +#define MX6SL_PAD_LCD_DAT19__EIM_DATA13 0x1dc 0x4e4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2 0x1dc 0x4e4 0x714 0x4 0x1 +#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x1dc 0x4e4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19 0x1dc 0x4e4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27 0x1dc 0x4e4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1e0 0x4e8 0x780 0x0 0x1 +#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0 0x1e0 0x4e8 0x68c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT 0x1e0 0x4e8 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_DAT2__PWM3_OUT 0x1e0 0x4e8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT2__AUD4_RXC 0x1e0 0x4e8 0x5ec 0x4 0x1 +#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x1e0 0x4e8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02 0x1e0 0x4e8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02 0x1e0 0x4e8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1e4 0x4ec 0x7c8 0x0 0x1 +#define MX6SL_PAD_LCD_DAT20__KEY_COL6 0x1e4 0x4ec 0x74c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT20__CSI_DATA13 0x1e4 0x4ec 0x664 0x2 0x0 +#define MX6SL_PAD_LCD_DAT20__EIM_DATA14 0x1e4 0x4ec 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1 0x1e4 0x4ec 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x1e4 0x4ec 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20 0x1e4 0x4ec 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28 0x1e4 0x4ec 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1e8 0x4f0 0x7cc 0x0 0x1 +#define MX6SL_PAD_LCD_DAT21__KEY_ROW6 0x1e8 0x4f0 0x76c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT21__CSI_DATA12 0x1e8 0x4f0 0x660 0x2 0x0 +#define MX6SL_PAD_LCD_DAT21__EIM_DATA15 0x1e8 0x4f0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2 0x1e8 0x4f0 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x1e8 0x4f0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21 0x1e8 0x4f0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29 0x1e8 0x4f0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1ec 0x4f4 0x7d0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT22__KEY_COL7 0x1ec 0x4f4 0x750 0x1 0x1 +#define MX6SL_PAD_LCD_DAT22__CSI_DATA11 0x1ec 0x4f4 0x65c 0x2 0x1 +#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B 0x1ec 0x4f4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3 0x1ec 0x4f4 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x1ec 0x4f4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22 0x1ec 0x4f4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30 0x1ec 0x4f4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1f0 0x4f8 0x7d4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT23__KEY_ROW7 0x1f0 0x4f8 0x770 0x1 0x1 +#define MX6SL_PAD_LCD_DAT23__CSI_DATA10 0x1f0 0x4f8 0x658 0x2 0x1 +#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B 0x1f0 0x4f8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN 0x1f0 0x4f8 0x718 0x4 0x1 +#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x1f0 0x4f8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23 0x1f0 0x4f8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31 0x1f0 0x4f8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1f4 0x4fc 0x784 0x0 0x1 +#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK 0x1f4 0x4fc 0x67c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B 0x1f4 0x4fc 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_DAT3__PWM4_OUT 0x1f4 0x4fc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT3__AUD4_RXD 0x1f4 0x4fc 0x5e4 0x4 0x1 +#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x1f4 0x4fc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03 0x1f4 0x4fc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03 0x1f4 0x4fc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1f8 0x500 0x788 0x0 0x1 +#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1 0x1f8 0x500 0x690 0x1 0x1 +#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC 0x1f8 0x500 0x678 0x2 0x2 +#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB 0x1f8 0x500 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT4__AUD4_TXC 0x1f8 0x500 0x5f4 0x4 0x1 +#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x1f8 0x500 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04 0x1f8 0x500 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04 0x1f8 0x500 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1fc 0x504 0x78c 0x0 0x1 +#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2 0x1fc 0x504 0x694 0x1 0x1 +#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC 0x1fc 0x504 0x670 0x2 0x2 +#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B 0x1fc 0x504 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS 0x1fc 0x504 0x5f8 0x4 0x1 +#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x1fc 0x504 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05 0x1fc 0x504 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05 0x1fc 0x504 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x200 0x508 0x790 0x0 0x1 +#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3 0x200 0x508 0x698 0x1 0x1 +#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK 0x200 0x508 0x674 0x2 0x2 +#define MX6SL_PAD_LCD_DAT6__EIM_DATA00 0x200 0x508 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT6__AUD4_TXD 0x200 0x508 0x5e8 0x4 0x1 +#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x200 0x508 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06 0x200 0x508 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06 0x200 0x508 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x204 0x50c 0x794 0x0 0x1 +#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY 0x204 0x50c 0x680 0x1 0x1 +#define MX6SL_PAD_LCD_DAT7__CSI_MCLK 0x204 0x50c 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_DAT7__EIM_DATA01 0x204 0x50c 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT 0x204 0x50c 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x204 0x50c 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07 0x204 0x50c 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07 0x204 0x50c 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x208 0x510 0x798 0x0 0x1 +#define MX6SL_PAD_LCD_DAT8__KEY_COL0 0x208 0x510 0x734 0x1 0x1 +#define MX6SL_PAD_LCD_DAT8__CSI_DATA09 0x208 0x510 0x654 0x2 0x1 +#define MX6SL_PAD_LCD_DAT8__EIM_DATA02 0x208 0x510 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK 0x208 0x510 0x69c 0x4 0x2 +#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x208 0x510 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08 0x208 0x510 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08 0x208 0x510 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x20c 0x514 0x79c 0x0 0x1 +#define MX6SL_PAD_LCD_DAT9__KEY_ROW0 0x20c 0x514 0x754 0x1 0x1 +#define MX6SL_PAD_LCD_DAT9__CSI_DATA08 0x20c 0x514 0x650 0x2 0x1 +#define MX6SL_PAD_LCD_DAT9__EIM_DATA03 0x20c 0x514 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI 0x20c 0x514 0x6a4 0x4 0x2 +#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x20c 0x514 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09 0x20c 0x514 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09 0x20c 0x514 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x210 0x518 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5 0x210 0x518 0x870 0x1 0x2 +#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E 0x210 0x518 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B 0x210 0x518 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA 0x210 0x518 0x804 0x4 0x2 +#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA 0x210 0x518 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x210 0x518 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x214 0x51c 0x774 0x0 0x0 +#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6 0x214 0x51c 0x874 0x1 0x2 +#define MX6SL_PAD_LCD_HSYNC__LCD_CS 0x214 0x51c 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B 0x214 0x51c 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA 0x214 0x51c 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA 0x214 0x51c 0x804 0x4 0x3 +#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x214 0x51c 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x214 0x51c 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_RESET__LCD_RESET 0x218 0x520 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B 0x218 0x520 0x880 0x1 0x1 +#define MX6SL_PAD_LCD_RESET__LCD_BUSY 0x218 0x520 0x774 0x2 0x1 +#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B 0x218 0x520 0x884 0x3 0x1 +#define MX6SL_PAD_LCD_RESET__UART2_CTS_B 0x218 0x520 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_RESET__UART2_RTS_B 0x218 0x520 0x800 0x4 0x2 +#define MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x218 0x520 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY 0x218 0x520 0x62c 0x6 0x1 +#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x21c 0x524 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7 0x21c 0x524 0x878 0x1 0x2 +#define MX6SL_PAD_LCD_VSYNC__LCD_RS 0x21c 0x524 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B 0x21c 0x524 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B 0x21c 0x524 0x800 0x4 0x3 +#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B 0x21c 0x524 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x21c 0x524 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x21c 0x524 0x000 0x6 0x0 +#define MX6SL_PAD_PWM1__PWM1_OUT 0x220 0x528 0x000 0x0 0x0 +#define MX6SL_PAD_PWM1__CCM_CLKO 0x220 0x528 0x000 0x1 0x0 +#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT 0x220 0x528 0x000 0x2 0x0 +#define MX6SL_PAD_PWM1__FEC_REF_OUT 0x220 0x528 0x000 0x3 0x0 +#define MX6SL_PAD_PWM1__CSI_MCLK 0x220 0x528 0x000 0x4 0x0 +#define MX6SL_PAD_PWM1__GPIO3_IO23 0x220 0x528 0x000 0x5 0x0 +#define MX6SL_PAD_PWM1__EPIT1_OUT 0x220 0x528 0x000 0x6 0x0 +#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0 +#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x224 0x52c 0x72c 0x1 0x2 +#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT 0x224 0x52c 0x000 0x2 0x0 +#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID 0x224 0x52c 0x5e0 0x3 0x2 +#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x224 0x52c 0x62c 0x4 0x2 +#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21 0x224 0x52c 0x000 0x5 0x0 +#define MX6SL_PAD_REF_CLK_24M__SD3_WP 0x224 0x52c 0x84c 0x6 0x3 +#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0 +#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x228 0x530 0x730 0x1 0x2 +#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT 0x228 0x530 0x000 0x2 0x0 +#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x228 0x530 0x5dc 0x3 0x3 +#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL 0x228 0x530 0x000 0x4 0x0 +#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x228 0x530 0x000 0x5 0x0 +#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B 0x228 0x530 0x838 0x6 0x3 +#define MX6SL_PAD_SD1_CLK__SD1_CLK 0x22c 0x534 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_CLK__FEC_MDIO 0x22c 0x534 0x6f4 0x1 0x2 +#define MX6SL_PAD_SD1_CLK__KEY_COL0 0x22c 0x534 0x734 0x2 0x2 +#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4 0x22c 0x534 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x22c 0x534 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_CMD__SD1_CMD 0x230 0x538 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK 0x230 0x538 0x70c 0x1 0x2 +#define MX6SL_PAD_SD1_CMD__KEY_ROW0 0x230 0x538 0x754 0x2 0x2 +#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5 0x230 0x538 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_CMD__GPIO5_IO14 0x230 0x538 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x234 0x53c 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER 0x234 0x53c 0x708 0x1 0x2 +#define MX6SL_PAD_SD1_DAT0__KEY_COL1 0x234 0x53c 0x738 0x2 0x2 +#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6 0x234 0x53c 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x234 0x53c 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x238 0x540 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV 0x238 0x540 0x704 0x1 0x2 +#define MX6SL_PAD_SD1_DAT1__KEY_ROW1 0x238 0x540 0x758 0x2 0x2 +#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7 0x238 0x540 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x238 0x540 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x23c 0x544 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1 0x23c 0x544 0x6fc 0x1 0x2 +#define MX6SL_PAD_SD1_DAT2__KEY_COL2 0x23c 0x544 0x73c 0x2 0x2 +#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8 0x23c 0x544 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x23c 0x544 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x240 0x548 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0 0x240 0x548 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT3__KEY_ROW2 0x240 0x548 0x75c 0x2 0x2 +#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9 0x240 0x548 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x240 0x548 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x244 0x54c 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT4__FEC_MDC 0x244 0x54c 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT4__KEY_COL3 0x244 0x54c 0x740 0x2 0x2 +#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N 0x244 0x54c 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x244 0x54c 0x814 0x4 0x4 +#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA 0x244 0x54c 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x244 0x54c 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x248 0x550 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0 0x248 0x550 0x6f8 0x1 0x2 +#define MX6SL_PAD_SD1_DAT5__KEY_ROW3 0x248 0x550 0x760 0x2 0x2 +#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED 0x248 0x550 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x248 0x550 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA 0x248 0x550 0x814 0x4 0x5 +#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09 0x248 0x550 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x24c 0x554 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN 0x24c 0x554 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT6__KEY_COL4 0x24c 0x554 0x744 0x2 0x2 +#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ 0x24c 0x554 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B 0x24c 0x554 0x810 0x4 0x4 +#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B 0x24c 0x554 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x24c 0x554 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x250 0x558 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1 0x250 0x558 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT7__KEY_ROW4 0x250 0x558 0x764 0x2 0x2 +#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY 0x250 0x558 0x62c 0x3 0x3 +#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B 0x250 0x558 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B 0x250 0x558 0x810 0x4 0x5 +#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10 0x250 0x558 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_CLK__SD2_CLK 0x254 0x55c 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_CLK__AUD4_RXFS 0x254 0x55c 0x5f0 0x1 0x2 +#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK 0x254 0x55c 0x6b0 0x2 0x2 +#define MX6SL_PAD_SD2_CLK__CSI_DATA00 0x254 0x55c 0x630 0x3 0x2 +#define MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x254 0x55c 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_CMD__SD2_CMD 0x258 0x560 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_CMD__AUD4_RXC 0x258 0x560 0x5ec 0x1 0x2 +#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0 0x258 0x560 0x6c0 0x2 0x2 +#define MX6SL_PAD_SD2_CMD__CSI_DATA01 0x258 0x560 0x634 0x3 0x2 +#define MX6SL_PAD_SD2_CMD__EPIT1_OUT 0x258 0x560 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x258 0x560 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x25c 0x564 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT0__AUD4_RXD 0x25c 0x564 0x5e4 0x1 0x2 +#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI 0x25c 0x564 0x6bc 0x2 0x2 +#define MX6SL_PAD_SD2_DAT0__CSI_DATA02 0x25c 0x564 0x638 0x3 0x2 +#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B 0x25c 0x564 0x818 0x4 0x4 +#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B 0x25c 0x564 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x25c 0x564 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x260 0x568 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT1__AUD4_TXC 0x260 0x568 0x5f4 0x1 0x2 +#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO 0x260 0x568 0x6b8 0x2 0x2 +#define MX6SL_PAD_SD2_DAT1__CSI_DATA03 0x260 0x568 0x63c 0x3 0x2 +#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B 0x260 0x568 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B 0x260 0x568 0x818 0x4 0x5 +#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x260 0x568 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x264 0x56c 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS 0x264 0x56c 0x5f8 0x1 0x2 +#define MX6SL_PAD_SD2_DAT2__FEC_COL 0x264 0x56c 0x6f0 0x2 0x1 +#define MX6SL_PAD_SD2_DAT2__CSI_DATA04 0x264 0x56c 0x640 0x3 0x2 +#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA 0x264 0x56c 0x81c 0x4 0x4 +#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA 0x264 0x56c 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x264 0x56c 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x268 0x570 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT3__AUD4_TXD 0x268 0x570 0x5e8 0x1 0x2 +#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK 0x268 0x570 0x700 0x2 0x1 +#define MX6SL_PAD_SD2_DAT3__CSI_DATA05 0x268 0x570 0x644 0x3 0x2 +#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA 0x268 0x570 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA 0x268 0x570 0x81c 0x4 0x5 +#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x268 0x570 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x26c 0x574 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT4__SD3_DATA4 0x26c 0x574 0x83c 0x1 0x1 +#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA 0x26c 0x574 0x804 0x2 0x4 +#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA 0x26c 0x574 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT4__CSI_DATA06 0x26c 0x574 0x648 0x3 0x2 +#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT 0x26c 0x574 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02 0x26c 0x574 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x270 0x578 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT5__SD3_DATA5 0x270 0x578 0x840 0x1 0x1 +#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA 0x270 0x578 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA 0x270 0x578 0x804 0x2 0x5 +#define MX6SL_PAD_SD2_DAT5__CSI_DATA07 0x270 0x578 0x64c 0x3 0x2 +#define MX6SL_PAD_SD2_DAT5__SPDIF_IN 0x270 0x578 0x7f0 0x4 0x2 +#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31 0x270 0x578 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x274 0x57c 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT6__SD3_DATA6 0x274 0x57c 0x844 0x1 0x1 +#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B 0x274 0x57c 0x800 0x2 0x4 +#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B 0x274 0x57c 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT6__CSI_DATA08 0x274 0x57c 0x650 0x3 0x2 +#define MX6SL_PAD_SD2_DAT6__SD2_WP 0x274 0x57c 0x834 0x4 0x2 +#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x274 0x57c 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x278 0x580 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT7__SD3_DATA7 0x278 0x580 0x848 0x1 0x1 +#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B 0x278 0x580 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B 0x278 0x580 0x800 0x2 0x5 +#define MX6SL_PAD_SD2_DAT7__CSI_DATA09 0x278 0x580 0x654 0x3 0x2 +#define MX6SL_PAD_SD2_DAT7__SD2_CD_B 0x278 0x580 0x830 0x4 0x2 +#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x278 0x580 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_RST__SD2_RESET 0x27c 0x584 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_RST__FEC_REF_OUT 0x27c 0x584 0x000 0x1 0x0 +#define MX6SL_PAD_SD2_RST__WDOG2_B 0x27c 0x584 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_RST__SPDIF_OUT 0x27c 0x584 0x000 0x3 0x0 +#define MX6SL_PAD_SD2_RST__CSI_MCLK 0x27c 0x584 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_RST__GPIO4_IO27 0x27c 0x584 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_CLK__SD3_CLK 0x280 0x588 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_CLK__AUD5_RXFS 0x280 0x588 0x608 0x1 0x1 +#define MX6SL_PAD_SD3_CLK__KEY_COL5 0x280 0x588 0x748 0x2 0x2 +#define MX6SL_PAD_SD3_CLK__CSI_DATA10 0x280 0x588 0x658 0x3 0x2 +#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x280 0x588 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x280 0x588 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR 0x280 0x588 0x000 0x6 0x0 +#define MX6SL_PAD_SD3_CMD__SD3_CMD 0x284 0x58c 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_CMD__AUD5_RXC 0x284 0x58c 0x604 0x1 0x1 +#define MX6SL_PAD_SD3_CMD__KEY_ROW5 0x284 0x58c 0x768 0x2 0x2 +#define MX6SL_PAD_SD3_CMD__CSI_DATA11 0x284 0x58c 0x65c 0x3 0x2 +#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID 0x284 0x58c 0x5e0 0x4 0x3 +#define MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x284 0x58c 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR 0x284 0x58c 0x000 0x6 0x0 +#define MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x288 0x590 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT0__AUD5_RXD 0x288 0x590 0x5fc 0x1 0x1 +#define MX6SL_PAD_SD3_DAT0__KEY_COL6 0x288 0x590 0x74c 0x2 0x2 +#define MX6SL_PAD_SD3_DAT0__CSI_DATA12 0x288 0x590 0x660 0x3 0x1 +#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x288 0x590 0x5dc 0x4 0x4 +#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x288 0x590 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x28c 0x594 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT1__AUD5_TXC 0x28c 0x594 0x60c 0x1 0x1 +#define MX6SL_PAD_SD3_DAT1__KEY_ROW6 0x28c 0x594 0x76c 0x2 0x2 +#define MX6SL_PAD_SD3_DAT1__CSI_DATA13 0x28c 0x594 0x664 0x3 0x1 +#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT 0x28c 0x594 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x28c 0x594 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B 0x28c 0x594 0x000 0x6 0x0 +#define MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x290 0x598 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS 0x290 0x598 0x610 0x1 0x1 +#define MX6SL_PAD_SD3_DAT2__KEY_COL7 0x290 0x598 0x750 0x2 0x2 +#define MX6SL_PAD_SD3_DAT2__CSI_DATA14 0x290 0x598 0x668 0x3 0x1 +#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT 0x290 0x598 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x290 0x598 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x290 0x598 0x820 0x6 0x3 +#define MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x294 0x59c 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT3__AUD5_TXD 0x294 0x59c 0x600 0x1 0x1 +#define MX6SL_PAD_SD3_DAT3__KEY_ROW7 0x294 0x59c 0x770 0x2 0x2 +#define MX6SL_PAD_SD3_DAT3__CSI_DATA15 0x294 0x59c 0x66c 0x3 0x1 +#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT 0x294 0x59c 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x294 0x59c 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC 0x294 0x59c 0x824 0x6 0x2 +#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x298 0x5a0 0x7fc 0x0 0x0 +#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x298 0x5a0 0x000 0x0 0x0 +#define MX6SL_PAD_UART1_RXD__PWM1_OUT 0x298 0x5a0 0x000 0x1 0x0 +#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA 0x298 0x5a0 0x814 0x2 0x6 +#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA 0x298 0x5a0 0x000 0x2 0x0 +#define MX6SL_PAD_UART1_RXD__FEC_COL 0x298 0x5a0 0x6f0 0x3 0x2 +#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA 0x298 0x5a0 0x81c 0x4 0x6 +#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA 0x298 0x5a0 0x000 0x4 0x0 +#define MX6SL_PAD_UART1_RXD__GPIO3_IO16 0x298 0x5a0 0x000 0x5 0x0 +#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x29c 0x5a4 0x000 0x0 0x0 +#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA 0x29c 0x5a4 0x7fc 0x0 0x1 +#define MX6SL_PAD_UART1_TXD__PWM2_OUT 0x29c 0x5a4 0x000 0x1 0x0 +#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA 0x29c 0x5a4 0x000 0x2 0x0 +#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA 0x29c 0x5a4 0x814 0x2 0x7 +#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK 0x29c 0x5a4 0x700 0x3 0x2 +#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA 0x29c 0x5a4 0x000 0x4 0x0 +#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA 0x29c 0x5a4 0x81c 0x4 0x7 +#define MX6SL_PAD_UART1_TXD__GPIO3_IO17 0x29c 0x5a4 0x000 0x5 0x0 +#define MX6SL_PAD_UART1_TXD__UART5_DCD_B 0x29c 0x5a4 0x000 0x7 0x0 +#define MX6SL_PAD_WDOG_B__WDOG1_B 0x2a0 0x5a8 0x000 0x0 0x0 +#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x2a0 0x5a8 0x000 0x1 0x0 +#define MX6SL_PAD_WDOG_B__UART5_RI_B 0x2a0 0x5a8 0x000 0x2 0x0 +#define MX6SL_PAD_WDOG_B__GPIO3_IO18 0x2a0 0x5a8 0x000 0x5 0x0 + +#endif /* __DTS_IMX6SL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/include/dt-bindings b/arch/arm/boot/dts/include/dt-bindings new file mode 120000 index 000000000000..08c00e4972fa --- /dev/null +++ b/arch/arm/boot/dts/include/dt-bindings @@ -0,0 +1 @@ +../../../../../include/dt-bindings
\ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 192cf76fbf93..23991e45bc55 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -49,6 +49,12 @@ }; }; + thermal@10078 { + compatible = "marvell,kirkwood-thermal"; + reg = <0x10078 0x4>; + status = "okay"; + }; + i2c@11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index bd83b8fc7c83..c3573be7b92c 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -77,6 +77,7 @@ }; nand@3000000 { + chip-delay = <40>; status = "okay"; partition@0 { diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 9555a86297c2..44fd97dfc1f3 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -69,6 +69,10 @@ status = "okay"; nr-ports = <1>; }; + + mvsdio@90000 { + status = "okay"; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 93c3afbef9ee..3694e94f6e99 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -96,11 +96,11 @@ marvell,function = "gpio"; }; pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 { - marvell,pins = "mpp44"; + marvell,pins = "mpp46"; marvell,function = "gpio"; }; pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 { - marvell,pins = "mpp45"; + marvell,pins = "mpp47"; marvell,function = "gpio"; }; @@ -157,14 +157,14 @@ gpios = <&gpio0 16 0>; linux,default-trigger = "default-on"; }; - health_led1 { + rebuild_led { + label = "status:white:rebuild_led"; + gpios = <&gpio1 4 0>; + }; + health_led { label = "status:red:health_led"; gpios = <&gpio1 5 0>; }; - health_led2 { - label = "status:white:health_led"; - gpios = <&gpio1 4 0>; - }; backup_led { label = "status:blue:backup_led"; gpios = <&gpio0 15 0>; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts new file mode 100644 index 000000000000..317300875f34 --- /dev/null +++ b/arch/arm/boot/dts/mpa1600.dts @@ -0,0 +1,69 @@ +/* + * mpa1600.dts - Device Tree file for Phontech MPA 1600 + * + * Copyright (C) 2013 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91rm9200.dtsi" + +/ { + model = "Phontech MPA 1600"; + compatible = "phontech,mpa1600", "atmel,at91rm9200"; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + ssc0: ssc@fffd0000 { + status = "okay"; + }; + + ssc1: ssc@fffd4000 { + status = "okay"; + }; + }; + + usb0: ohci@00300000 { + num-ports = <1>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + }; + + gpio_keys { + compatible = "gpio-keys"; + + monitor_mute { + label = "Monitor mute"; + gpios = <&pioC 1 1>; + linux,code = <113>; + }; + }; +}; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 31f2157cd7d7..9bf49b3826ea 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -16,19 +16,13 @@ }; timer@2000004 { - compatible = "qcom,msm-gpt", "qcom,msm-timer"; - interrupts = <1 1 0x301>; - reg = <0x02000004 0x10>; - clock-frequency = <32768>; - cpu-offset = <0x40000>; - }; - - timer@2000024 { - compatible = "qcom,msm-dgt", "qcom,msm-timer"; - interrupts = <1 0 0x301>; - reg = <0x02000024 0x10>, - <0x02000034 0x4>; - clock-frequency = <6750000>; + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 0 0x301>, + <1 1 0x301>, + <1 2 0x301>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>, + <32768>; cpu-offset = <0x40000>; }; @@ -38,4 +32,10 @@ <0x19c00000 0x1000>; interrupts = <0 195 0x0>; }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; }; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index 9e621b5ad3dd..2e4d87a125d6 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -15,20 +15,14 @@ < 0x02002000 0x1000 >; }; - timer@200a004 { - compatible = "qcom,msm-gpt", "qcom,msm-timer"; - interrupts = <1 2 0x301>; - reg = <0x0200a004 0x10>; - clock-frequency = <32768>; - cpu-offset = <0x80000>; - }; - - timer@200a024 { - compatible = "qcom,msm-dgt", "qcom,msm-timer"; - interrupts = <1 1 0x301>; - reg = <0x0200a024 0x10>, - <0x0200a034 0x4>; - clock-frequency = <6750000>; + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; cpu-offset = <0x80000>; }; @@ -38,4 +32,10 @@ <0x16400000 0x1000>; interrupts = <0 154 0x0>; }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; }; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 8aad00f81ed9..892c64e3f1e1 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -13,6 +13,9 @@ compatible = "marvell,orion5x"; interrupt-parent = <&intc>; + aliases { + gpio0 = &gpio0; + }; intc: interrupt-controller { compatible = "marvell,orion-intc", "marvell,intc"; interrupt-controller; @@ -32,7 +35,9 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10100 0x40>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <6>, <7>, <8>, <9>; }; @@ -69,6 +74,20 @@ status = "okay"; }; + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <17>; + status = "disabled"; + }; + + ehci@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0xa0000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; + sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; @@ -86,12 +105,31 @@ status = "disabled"; }; + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; + + xor00 { + interrupts = <30>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <31>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + crypto@90000 { compatible = "marvell,orion-crypto"; reg = <0x90000 0x10000>, <0xf2200000 0x800>; reg-names = "regs", "sram"; - interrupts = <22>; + interrupts = <28>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi new file mode 100644 index 000000000000..39b0458d365a --- /dev/null +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -0,0 +1,1031 @@ +/* + * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel SAMA5D3 family SoC"; + compatible = "atmel,sama5d3", "atmel,sama5"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + gpio4 = &pioE; + tcb0 = &tcb0; + tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + ssc0 = &ssc0; + ssc1 = &ssc1; + }; + cpus { + cpu@0 { + compatible = "arm,cortex-a5"; + }; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mmc0: mmc@f0000000 { + compatible = "atmel,hsmci"; + reg = <0xf0000000 0x600>; + interrupts = <21 4 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@f0004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9x5-spi"; + reg = <0xf0004000 0x100>; + interrupts = <24 4 3>; + cs-gpios = <&pioD 13 0 + &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ + &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ + &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + ssc0: ssc@f0008000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0008000 0x4000>; + interrupts = <38 4 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + + can0: can@f000c000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf000c000 0x300>; + interrupts = <40 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + status = "disabled"; + }; + + tcb0: timer@f0010000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf0010000 0x100>; + interrupts = <26 4 0>; + }; + + i2c0: i2c@f0014000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf0014000 0x4000>; + interrupts = <18 4 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@f0018000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf0018000 0x4000>; + interrupts = <19 4 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usart0: serial@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + interrupts = <12 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + status = "disabled"; + }; + + usart1: serial@f0020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf0020000 0x100>; + interrupts = <13 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; + status = "disabled"; + }; + + macb0: ethernet@f0028000 { + compatible = "cnds,pc302-gem", "cdns,gem"; + reg = <0xf0028000 0x100>; + interrupts = <34 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; + status = "disabled"; + }; + + isi: isi@f0034000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf0034000 0x4000>; + interrupts = <37 4 5>; + status = "disabled"; + }; + + mmc1: mmc@f8000000 { + compatible = "atmel,hsmci"; + reg = <0xf8000000 0x600>; + interrupts = <22 4 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@f8004000 { + compatible = "atmel,hsmci"; + reg = <0xf8004000 0x600>; + interrupts = <23 4 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@f8008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9x5-spi"; + reg = <0xf8008000 0x100>; + interrupts = <25 4 3>; + cs-gpios = <&pioC 25 0 + &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ + &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ + &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; + + ssc1: ssc@f800c000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf800c000 0x4000>; + interrupts = <39 4 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + status = "disabled"; + }; + + can1: can@f8010000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8010000 0x300>; + interrupts = <41 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + }; + + tcb1: timer@f8014000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8014000 0x100>; + interrupts = <27 4 0>; + }; + + adc0: adc@f8018000 { + compatible = "atmel,at91sam9260-adc"; + reg = <0xf8018000 0x100>; + interrupts = <29 4 5>; + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7 + &pinctrl_adc0_ad8 + &pinctrl_adc0_ad9 + &pinctrl_adc0_ad10 + &pinctrl_adc0_ad11 + >; + atmel,adc-channel-base = <0x50>; + atmel,adc-channels-used = <0xfff>; + atmel,adc-drdy-mask = <0x1000000>; + atmel,adc-num-channels = <12>; + atmel,adc-startup-time = <40>; + atmel,adc-status-register = <0x30>; + atmel,adc-trigger-register = <0xc0>; + atmel,adc-use-external; + atmel,adc-vref = <3000>; + atmel,adc-res = <10 12>; + atmel,adc-res-names = "lowres", "highres"; + status = "disabled"; + + trigger@0 { + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + trigger@1 { + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + trigger@2 { + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + trigger@3 { + trigger-name = "continuous"; + trigger-value = <0x6>; + }; + }; + + tsadcc: tsadcc@f8018000 { + compatible = "atmel,at91sam9x5-tsadcc"; + reg = <0xf8018000 0x4000>; + interrupts = <29 4 5>; + atmel,tsadcc_clock = <300000>; + atmel,filtering_average = <0x03>; + atmel,pendet_debounce = <0x08>; + atmel,pendet_sensitivity = <0x02>; + atmel,ts_sample_hold_time = <0x0a>; + status = "disabled"; + }; + + i2c2: i2c@f801c000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf801c000 0x4000>; + interrupts = <20 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usart2: serial@f8020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8020000 0x100>; + interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; + status = "disabled"; + }; + + usart3: serial@f8024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8024000 0x100>; + interrupts = <15 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + status = "disabled"; + }; + + macb1: ethernet@f802c000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <35 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + status = "disabled"; + }; + + sha@f8034000 { + compatible = "atmel,sam9g46-sha"; + reg = <0xf8034000 0x100>; + interrupts = <42 4 0>; + }; + + aes@f8038000 { + compatible = "atmel,sam9g46-aes"; + reg = <0xf8038000 0x100>; + interrupts = <43 4 0>; + }; + + tdes@f803c000 { + compatible = "atmel,sam9g46-tdes"; + reg = <0xf803c000 0x100>; + interrupts = <44 4 0>; + }; + + dma0: dma-controller@ffffe600 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffe600 0x200>; + interrupts = <30 4 0>; + #dma-cells = <1>; + }; + + dma1: dma-controller@ffffe800 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffe800 0x200>; + interrupts = <31 4 0>; + #dma-cells = <1>; + }; + + ramc0: ramc@ffffea00 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffea00 0x200>; + }; + + dbgu: serial@ffffee00 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xffffee00 0x200>; + interrupts = <2 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "disabled"; + }; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,sama5d3-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <47>; + }; + + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */ + 0xffffffff 0x0ff8ffff 0x00000000 /* pioB */ + 0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */ + 0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */ + 0xffffffff 0xbf9f8000 0x18000000 /* pioE */ + >; + + /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_adtrg: adc0_adtrg { + atmel,pins = + <3 19 0x1 0x0>; /* PD19 periph A ADTRG */ + }; + pinctrl_adc0_ad0: adc0_ad0 { + atmel,pins = + <3 20 0x1 0x0>; /* PD20 periph A AD0 */ + }; + pinctrl_adc0_ad1: adc0_ad1 { + atmel,pins = + <3 21 0x1 0x0>; /* PD21 periph A AD1 */ + }; + pinctrl_adc0_ad2: adc0_ad2 { + atmel,pins = + <3 22 0x1 0x0>; /* PD22 periph A AD2 */ + }; + pinctrl_adc0_ad3: adc0_ad3 { + atmel,pins = + <3 23 0x1 0x0>; /* PD23 periph A AD3 */ + }; + pinctrl_adc0_ad4: adc0_ad4 { + atmel,pins = + <3 24 0x1 0x0>; /* PD24 periph A AD4 */ + }; + pinctrl_adc0_ad5: adc0_ad5 { + atmel,pins = + <3 25 0x1 0x0>; /* PD25 periph A AD5 */ + }; + pinctrl_adc0_ad6: adc0_ad6 { + atmel,pins = + <3 26 0x1 0x0>; /* PD26 periph A AD6 */ + }; + pinctrl_adc0_ad7: adc0_ad7 { + atmel,pins = + <3 27 0x1 0x0>; /* PD27 periph A AD7 */ + }; + pinctrl_adc0_ad8: adc0_ad8 { + atmel,pins = + <3 28 0x1 0x0>; /* PD28 periph A AD8 */ + }; + pinctrl_adc0_ad9: adc0_ad9 { + atmel,pins = + <3 29 0x1 0x0>; /* PD29 periph A AD9 */ + }; + pinctrl_adc0_ad10: adc0_ad10 { + atmel,pins = + <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */ + }; + pinctrl_adc0_ad11: adc0_ad11 { + atmel,pins = + <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */ + }; + }; + + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + <3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + 3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + <1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */ + 1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */ + }; + }; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 30 0x1 0x0 /* PB30 periph A */ + 1 31 0x1 0x1>; /* PB31 periph A with pullup */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ + 0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ + 2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ + }; + }; + + isi { + pinctrl_isi: isi-0 { + atmel,pins = + <0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ + 0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ + 0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ + 0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ + 0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ + 0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ + 0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ + 0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ + 2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ + 0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ + 0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ + 2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ + 2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ + }; + pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 { + atmel,pins = + <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */ + }; + }; + + lcd { + pinctrl_lcd: lcd-0 { + atmel,pins = + <0 24 0x1 0x0 /* PA24 periph A LCDPWM */ + 0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */ + 0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */ + 0 25 0x1 0x0 /* PA25 periph A LCDDISP */ + 0 29 0x1 0x0 /* PA29 periph A LCDDEN */ + 0 28 0x1 0x0 /* PA28 periph A LCDPCK */ + 0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */ + 0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */ + 0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */ + 0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */ + 0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */ + 0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */ + 0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */ + 0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */ + 0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */ + 0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */ + 0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */ + 0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */ + 0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */ + 0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */ + 0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */ + 0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */ + 2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */ + 2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */ + 2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */ + 2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */ + 2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */ + 2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */ + 4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */ + 4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */ + }; + }; + + macb0 { + pinctrl_macb0_data_rgmii: macb0_data_rgmii { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */ + 1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */ + 1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */ + 1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */ + 1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */ + 1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */ + 1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */ + 1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */ + }; + pinctrl_macb0_data_gmii: macb0_data_gmii { + atmel,pins = + <1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + 1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + 1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + 1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + 1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + 1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */ + 1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */ + 1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */ + }; + pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { + atmel,pins = + <1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */ + 1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ + 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ + 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ + 1 16 0x1 0x0 /* PB16 periph A GMDC */ + 1 17 0x1 0x0 /* PB17 periph A GMDIO */ + 1 18 0x1 0x0>; /* PB18 periph A G125CK */ + }; + pinctrl_macb0_signal_gmii: macb0_signal_gmii { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ + 1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */ + 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ + 1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */ + 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ + 1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */ + 1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */ + 1 16 0x1 0x0 /* PB16 periph A GMDC */ + 1 17 0x1 0x0 /* PB17 periph A GMDIO */ + 1 27 0x2 0x0>; /* PB27 periph B G125CKO */ + }; + + }; + + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */ + 2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */ + 2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */ + 2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */ + 2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */ + 2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + 2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */ + 2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */ + 2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */ + 2 9 0x1 0x0>; /* PC9 periph A EMDIO */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { + atmel,pins = + <3 9 0x1 0x0 /* PD9 periph A MCI0_CK */ + 3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */ + 3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */ + }; + pinctrl_mmc0_dat1_3: mmc0_dat1_3 { + atmel,pins = + <3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */ + 3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */ + 3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */ + }; + pinctrl_mmc0_dat4_7: mmc0_dat4_7 { + atmel,pins = + <3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ + 3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ + 3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ + 3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ + }; + }; + + mmc1 { + pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { + atmel,pins = + <1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */ + 1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ + 1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ + }; + pinctrl_mmc1_dat1_3: mmc1_dat1_3 { + atmel,pins = + <1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ + 1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ + 1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ + }; + }; + + mmc2 { + pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { + atmel,pins = + <2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + 2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */ + 2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */ + }; + pinctrl_mmc2_dat1_3: mmc2_dat1_3 { + atmel,pins = + <2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + 2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + 2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + }; + }; + + nand0 { + pinctrl_nand0_ale_cle: nand0_ale_cle-0 { + atmel,pins = + <4 21 0x1 0x1 /* PE21 periph A with pullup */ + 4 22 0x1 0x1>; /* PE22 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <6 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <7 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <8 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <9 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <10 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */ + 3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */ + 3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */ + 3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */ + 2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */ + 2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */ + 2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */ + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx { + atmel,pins = + <2 16 0x1 0x0 /* PC16 periph A TK0 */ + 2 17 0x1 0x0 /* PC17 periph A TF0 */ + 2 18 0x1 0x0>; /* PC18 periph A TD0 */ + }; + + pinctrl_ssc0_rx: ssc0_rx { + atmel,pins = + <2 19 0x1 0x0 /* PC19 periph A RK0 */ + 2 20 0x1 0x0 /* PC20 periph A RF0 */ + 2 21 0x1 0x0>; /* PC21 periph A RD0 */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx { + atmel,pins = + <1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */ + 1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */ + 1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */ + }; + + pinctrl_ssc1_rx: ssc1_rx { + atmel,pins = + <1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */ + 1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */ + 1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + 2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + 0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <3 17 0x1 0x0 /* PD17 periph A */ + 3 18 0x1 0x1>; /* PD18 periph A with pullup */ + }; + + pinctrl_usart0_rts_cts: usart0_rts_cts-0 { + atmel,pins = + <3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ + 3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <1 28 0x1 0x0 /* PB28 periph A */ + 1 29 0x1 0x1>; /* PB29 periph A with pullup */ + }; + + pinctrl_usart1_rts_cts: usart1_rts_cts-0 { + atmel,pins = + <1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */ + 1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */ + 4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */ + }; + + pinctrl_usart2_rts_cts: usart2_rts_cts-0 { + atmel,pins = + <4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */ + 4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */ + 4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */ + }; + + pinctrl_usart3_rts_cts: usart3_rts_cts-0 { + atmel,pins = + <4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */ + 4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */ + }; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x120>; + }; + + rstc@fffffe00 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfffffe00 0x10>; + }; + + pit: timer@fffffe30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffe30 0xf>; + interrupts = <3 4 5>; + }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + status = "disabled"; + }; + + rtc@fffffeb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffeb0 0x30>; + interrupts = <1 4 7>; + }; + }; + + usb0: gadget@00500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00500000 0x100000 + 0xf8030000 0x4000>; + interrupts = <33 4 2>; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep7 { + reg = <7>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep8 { + reg = <8>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep9 { + reg = <9>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep10 { + reg = <10>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep11 { + reg = <11>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep12 { + reg = <12>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep13 { + reg = <13>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep14 { + reg = <14>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep15 { + reg = <15>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + }; + + usb1: ohci@00600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00600000 0x100000>; + interrupts = <32 4 2>; + status = "disabled"; + }; + + usb2: ehci@00700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00700000 0x100000>; + interrupts = <32 4 2>; + status = "disabled"; + }; + + nand0: nand@60000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = < 0x60000000 0x01000000 /* EBI CS3 */ + 0xffffc070 0x00000490 /* SMC PMECC regs */ + 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */ + 0x00100000 0x00100000 /* ROM code */ + 0x70000000 0x10000000 /* NFC Command Registers */ + 0xffffc000 0x00000070 /* NFC HSMC regs */ + 0x00200000 0x00100000 /* NFC SRAM banks */ + >; + interrupts = <5 4 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand0_ale_cle>; + atmel,pmecc-lookup-table-offset = <0x10000 0x18000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts new file mode 100644 index 000000000000..fa5d216f1db7 --- /dev/null +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -0,0 +1,51 @@ +/* + * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "sama5d3xmb.dtsi" +/include/ "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D31-EK"; + compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + leds { + d3 { + label = "d3"; + gpios = <&pioE 24 0>; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts new file mode 100644 index 000000000000..c38c9433d7a5 --- /dev/null +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -0,0 +1,44 @@ +/* + * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "sama5d3xmb.dtsi" +/include/ "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D33-EK"; + compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts new file mode 100644 index 000000000000..d2739f8d7ae9 --- /dev/null +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -0,0 +1,61 @@ +/* + * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "sama5d3xmb.dtsi" +/include/ "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D34-EK"; + compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + + 24c256@50 { + compatible = "24c256"; + reg = <0x50>; + pagesize = <64>; + }; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + }; + }; + + leds { + d3 { + label = "d3"; + gpios = <&pioE 24 0>; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts new file mode 100644 index 000000000000..a488fc4e9777 --- /dev/null +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -0,0 +1,56 @@ +/* + * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "sama5d3xmb.dtsi" + +/ { + model = "Atmel SAMA5D35-EK"; + compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + isi: isi@f0034000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 27 0>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi new file mode 100644 index 000000000000..1f8ed404626c --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -0,0 +1,91 @@ +/* + * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/include/ "sama5d3.dtsi" + +/ { + compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + atmel,has-nfc; + atmel,use-nfc-sram; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi new file mode 100644 index 000000000000..4b8830eb2060 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -0,0 +1,42 @@ +/* + * sama5d3dm.dtsi - Device Tree file for SAMA5 display module + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + ahb { + apb { + i2c1: i2c@f0018000 { + qt1070: keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioE>; + interrupts = <31 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + }; + }; + + adc0: adc@f8018000 { + status = "disabled"; + }; + + tsadcc: tsadcc@f8018000 { + status = "okay"; + }; + + pinctrl@fffff200 { + board { + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */ + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi new file mode 100644 index 000000000000..661d7ca9c309 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -0,0 +1,166 @@ +/* + * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/include/ "sama5d3xcm.dtsi" + +/ { + compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 17 0>; + }; + }; + + spi0: spi@f0004000 { + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + /* + * i2c0 conflicts with ISI: + * disable it to allow the use of ISI + * can not enable audio when i2c0 disabled + */ + i2c0: i2c@f0014000 { + wm8904: wm8904@1a { + compatible = "wm8904"; + reg = <0x1a>; + }; + }; + + usart1: serial@f0020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + isi: isi@f0034000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>; + }; + + mmc1: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 18 0>; + }; + }; + + adc0: adc@f8018000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + }; + + pinctrl@fffff200 { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */ + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */ + }; + + pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { + atmel,pins = + <3 30 0x2 0x0>; /* PD30 periph B */ + }; + + pinctrl_isi_reset: isi_reset-0 { + atmel,pins = + <4 24 0x0 0x0>; /* PE24 gpio */ + }; + + pinctrl_isi_power: isi_power-0 { + atmel,pins = + <4 29 0x0 0x0>; /* PE29 gpio */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */ + }; + }; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioD 29 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00600000 { + num-ports = <3>; + atmel,vbus-gpio = <&pioD 25 0 + &pioD 26 1 + &pioD 27 1 + >; + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + }; + + sound { + compatible = "atmel,sama5d3ek-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D3EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; +}; diff --git a/arch/arm/boot/dts/skeleton64.dtsi b/arch/arm/boot/dts/skeleton64.dtsi new file mode 100644 index 000000000000..15994158a998 --- /dev/null +++ b/arch/arm/boot/dts/skeleton64.dtsi @@ -0,0 +1,13 @@ +/* + * Skeleton device tree in the 64 bits version; the bare minimum + * needed to boot; just include and add a compatible value. The + * bootloader will typically populate the memory node. + */ + +/ { + #address-cells = <2>; + #size-cells = <2>; + chosen { }; + aliases { }; + memory { device_type = "memory"; reg = <0 0>; }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index d3ec32f6b790..db5db24fd544 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -299,6 +299,10 @@ }; ab8500 { + ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 7e8769bd5977..16a6e13e08b4 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -81,6 +81,163 @@ }; }; + clkmgr@ffd04000 { + compatible = "altr,clk-mgr"; + reg = <0xffd04000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + main_pll: main_pll { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "altr,socfpga-pll-clock"; + clocks = <&osc>; + reg = <0x40>; + + mpuclk: mpuclk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + fixed-divider = <2>; + reg = <0x48>; + }; + + mainclk: mainclk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + fixed-divider = <4>; + reg = <0x4C>; + }; + + dbg_base_clk: dbg_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + fixed-divider = <4>; + reg = <0x50>; + }; + + main_qspi_clk: main_qspi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + reg = <0x54>; + }; + + main_nand_sdmmc_clk: main_nand_sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + reg = <0x58>; + }; + + cfg_s2f_usr0_clk: cfg_s2f_usr0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + reg = <0x5C>; + }; + }; + + periph_pll: periph_pll { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "altr,socfpga-pll-clock"; + clocks = <&osc>; + reg = <0x80>; + + emac0_clk: emac0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x88>; + }; + + emac1_clk: emac1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x8C>; + }; + + per_qspi_clk: per_qsi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x90>; + }; + + per_nand_mmc_clk: per_nand_mmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x94>; + }; + + per_base_clk: per_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x98>; + }; + + s2f_usr1_clk: s2f_usr1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x9C>; + }; + }; + + sdram_pll: sdram_pll { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "altr,socfpga-pll-clock"; + clocks = <&osc>; + reg = <0xC0>; + + ddr_dqs_clk: ddr_dqs_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&sdram_pll>; + reg = <0xC8>; + }; + + ddr_2x_dqs_clk: ddr_2x_dqs_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&sdram_pll>; + reg = <0xCC>; + }; + + ddr_dq_clk: ddr_dq_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&sdram_pll>; + reg = <0xD0>; + }; + + s2f_usr2_clk: s2f_usr2_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&sdram_pll>; + reg = <0xD4>; + }; + }; + }; + }; + gmac0: stmmac@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; reg = <0xff700000 0x2000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts index 3ae8a83a0875..2495958f1016 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5.dts @@ -33,6 +33,14 @@ }; soc { + clkmgr@ffd04000 { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; + timer0@ffc08000 { clock-frequency = <100000000>; }; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 1036eba40bbf..0bf035d607f0 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -33,6 +33,14 @@ }; soc { + clkmgr@ffd04000 { + clocks { + osc1 { + clock-frequency = <10000000>; + }; + }; + }; + timer0@ffc08000 { clock-frequency = <7000000>; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 1513c1927cc8..122ae94076c8 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -89,7 +89,7 @@ pinmux: pinmux@e0700000 { compatible = "st,spear1310-pinmux"; reg = <0xe0700000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; apb { @@ -212,7 +212,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 246>; + gpio-ranges = <&pinmux 0 0 246>; status = "disabled"; st-plgpio,ngpio = <246>; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 34da11aa6795..c511c4772efd 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -63,7 +63,7 @@ pinmux: pinmux@e0700000 { compatible = "st,spear1340-pinmux"; reg = <0xe0700000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; pwm: pwm@e0180000 { @@ -127,7 +127,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 252>; + gpio-ranges = <&pinmux 0 0 252>; status = "disabled"; st-plgpio,ngpio = <250>; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index ab45b8c81982..95372080eea6 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -25,7 +25,7 @@ pinmux: pinmux@b4000000 { compatible = "st,spear310-pinmux"; reg = <0xb4000000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; fsmc: flash@44000000 { @@ -102,7 +102,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 102>; + gpio-ranges = <&pinmux 0 0 102>; status = "disabled"; st-plgpio,ngpio = <102>; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index caa5520b1fd4..ffea342aeec9 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -24,7 +24,7 @@ pinmux: pinmux@b3000000 { compatible = "st,spear320-pinmux"; reg = <0xb3000000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; clcd@90000000 { @@ -130,7 +130,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 102>; + gpio-ranges = <&pinmux 0 0 102>; status = "disabled"; st-plgpio,ngpio = <102>; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi index 39446a247e79..615392a75676 100644 --- a/arch/arm/boot/dts/stuib.dtsi +++ b/arch/arm/boot/dts/stuib.dtsi @@ -15,7 +15,7 @@ stmpe1601: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; - interrupts = <26 0x1>; + interrupts = <26 0x2>; interrupt-parent = <&gpio6>; interrupt-controller; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 5cab82540437..b70fe0db6bb7 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -26,13 +26,37 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { - status = "okay"; + soc@01c20000 { + pinctrl@01c20800 { + led_pins_cubieboard: led_pins@0 { + allwinner,pins = "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; }; - uart1: uart@01c28400 { + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cubieboard>; + + blue { + label = "cubieboard::blue"; + gpios = <&pio 7 21 0>; /* LED1 */ + }; + + green { + label = "cubieboard::green"; + gpios = <&pio 7 20 0>; /* LED2 */ + linux,default-trigger = "heartbeat"; + }; + }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index f84549ad791e..b9efac100c85 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -22,8 +22,10 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts new file mode 100644 index 000000000000..4a7c35d6726a --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -0,0 +1,32 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i-a10.dtsi" + +/ { + model = "PineRiver Mini X-Plus"; + compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: uart@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index f99f60dadf5d..e7ef619a70a2 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -10,19 +10,174 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "sunxi.dtsi" +/include/ "skeleton.dtsi" / { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + memory { reg = <0x40000000 0x80000000>; }; - soc { - pinctrl@01c20800 { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + pll1: pll1@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + }; + + axi_gates: axi_gates@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-output-names = "axi_dram"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + }; + + ahb_gates: ahb_gates@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", + "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", + "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", + "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", + "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", + "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", + "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", + "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", + "ahb_de_fe1", "ahb_mp", "ahb_mali400"; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + }; + + apb0_gates: apb0_gates@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", + "apb0_ir1", "apb0_keypad"; + }; + + /* dummy is pll62 */ + apb1_mux: apb1_mux@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&dummy>, <&osc32k>; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; + }; + + apb1_gates: apb1_gates@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb1-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_can", "apb1_scr", + "apb1_ps20", "apb1_ps21", "apb1_uart0", + "apb1_uart1", "apb1_uart2", "apb1_uart3", + "apb1_uart4", "apb1_uart5", "apb1_uart6", + "apb1_uart7"; + }; + }; + + soc@01c20000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { compatible = "allwinner,sun4i-a10-pinctrl"; reg = <0x01c20800 0x400>; + clocks = <&apb0_gates 5>; + gpio-controller; #address-cells = <1>; #size-cells = <0>; + #gpio-cells = <3>; uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; @@ -45,5 +200,97 @@ allwinner,pull = <0>; }; }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 16>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 18>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <17>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 20>; + status = "disabled"; + }; + + uart5: serial@01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <18>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 21>; + status = "disabled"; + }; + + uart6: serial@01c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = <19>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 22>; + status = "disabled"; + }; + + uart7: serial@01c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = <20>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 23>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 4a1e45d4aace..3ca55067f868 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -22,11 +22,31 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart1: uart@01c28400 { + soc@01c20000 { + pinctrl@01c20800 { + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart1: serial@01c28400 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; status = "okay"; }; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; + + power { + gpios = <&pio 6 9 0>; + default-state = "on"; + }; + }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index e1121890fb29..31fa38f8cc98 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -11,19 +11,174 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "sunxi.dtsi" +/include/ "skeleton.dtsi" / { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + memory { reg = <0x40000000 0x20000000>; }; - soc { - pinctrl@01c20800 { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + pll1: pll1@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + }; + + axi_gates: axi_gates@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-output-names = "axi_dram"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + }; + + ahb_gates: ahb_gates@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", + "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", + "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", + "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", + "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", + "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", + "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", + "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", + "ahb_de_fe1", "ahb_mp", "ahb_mali400"; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + }; + + apb0_gates: apb0_gates@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", + "apb0_ir1", "apb0_keypad"; + }; + + /* dummy is pll62 */ + apb1_mux: apb1_mux@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&dummy>, <&osc32k>; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; + }; + + apb1_gates: apb1_gates@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb1-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_can", "apb1_scr", + "apb1_ps20", "apb1_ps21", "apb1_uart0", + "apb1_uart1", "apb1_uart2", "apb1_uart3", + "apb1_uart4", "apb1_uart5", "apb1_uart6", + "apb1_uart7"; + }; + }; + + soc@01c20000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; + clocks = <&apb0_gates 5>; + gpio-controller; #address-cells = <1>; #size-cells = <0>; + #gpio-cells = <3>; uart1_pins_a: uart1@0 { allwinner,pins = "PE10", "PE11"; @@ -39,5 +194,37 @@ allwinner,pull = <0>; }; }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi deleted file mode 100644 index 8b36abea9f2e..000000000000 --- a/arch/arm/boot/dts/sunxi.dtsi +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright 2012 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/include/ "skeleton.dtsi" - -/ { - interrupt-parent = <&intc>; - - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x01c20000 0x300000>; - ranges; - - timer@01c20c00 { - compatible = "allwinner,sunxi-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sunxi-wdt"; - reg = <0x01c20c90 0x10>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sunxi-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - uart0: uart@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = <1>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <24000000>; - status = "disabled"; - }; - - uart1: uart@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <24000000>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/boot/dts/tps6507x.dtsi b/arch/arm/boot/dts/tps6507x.dtsi new file mode 100644 index 000000000000..4c326e591e5a --- /dev/null +++ b/arch/arm/boot/dts/tps6507x.dtsi @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65070.pdf + */ + +&tps { + compatible = "ti,tps6507x"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "VDCDC1"; + }; + + vdcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "VDCDC2"; + }; + + vdcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "VDCDC3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "LDO1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "LDO2"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 73187173117c..9420053acc14 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -117,7 +117,7 @@ }; pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index dfe371ec2749..d2803be4e1a8 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -134,7 +134,7 @@ }; pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 6328cbc71d30..c544a5504591 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -111,7 +111,7 @@ }; pmu { - compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a5-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts index 567cf4e8ab84..877b33afa7ed 100644 --- a/arch/arm/boot/dts/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -11,26 +11,22 @@ / { model = "Benign BV07 Netbook"; +}; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; +&fb { + bits-per-pixel = <16>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index e1c3926aca52..4a4b96f6827e 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -100,12 +100,10 @@ interrupts = <43>; }; - fb@d800e400 { + fb: fb@d8050800 { compatible = "via,vt8500-fb"; reg = <0xd800e400 0x400>; interrupts = <12>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts index fd4e248074c6..edd2cec3d37f 100644 --- a/arch/arm/boot/dts/wm8505-ref.dts +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -11,26 +11,22 @@ / { model = "Wondermedia WM8505 Netbook"; +}; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <32>; /* non-standard but required */ - }; +&fb { + bits-per-pixel = <32>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index bb92ef8ce665..b2bf359e852f 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -62,6 +62,19 @@ clock-frequency = <24000000>; }; + ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + pllb: pllb { + #clock-cells = <0>; + compatible = "via,vt8500-pll-clock"; + clocks = <&ref25>; + reg = <0x204>; + }; + clkuart0: uart0 { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; @@ -109,6 +122,16 @@ enable-reg = <0x250>; enable-bit = <23>; }; + + clksdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; + }; }; }; @@ -130,11 +153,9 @@ interrupts = <0>; }; - fb@d8050800 { + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { @@ -189,5 +210,13 @@ reg = <0xd8100000 0x10000>; interrupts = <48>; }; + + sdhc@d800a000 { + compatible = "wm,wm8505-sdhc"; + reg = <0xd800a000 0x1000>; + interrupts = <20 21>; + clocks = <&clksdhc>; + bus-width = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts index cefd938f842f..61671a0d9ede 100644 --- a/arch/arm/boot/dts/wm8650-mid.dts +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -11,26 +11,24 @@ / { model = "Wondermedia WM8650-MID Tablet"; +}; + +&fb { + bits-per-pixel = <16>; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; + diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index bb4af580f40b..dd8464eeb40d 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -130,11 +130,9 @@ interrupts = <43>; }; - fb@d8050800 { + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts index fcc660c89540..32d22532cd6c 100644 --- a/arch/arm/boot/dts/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -15,28 +15,6 @@ / { model = "Wondermedia WM8850-W70v2 Tablet"; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 50000 1>; /* duty inverted */ @@ -45,3 +23,21 @@ default-brightness-level = <5>; }; }; + +&fb { + bits-per-pixel = <16>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index 11cd180c58d3..fc790d0aee66 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -137,11 +137,9 @@ }; }; - fb@d8051700 { + fb: fb@d8051700 { compatible = "wm,wm8505-fb"; reg = <0xd8051700 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 51243db2e9e4..748fc347ed18 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -15,6 +15,13 @@ / { compatible = "xlnx,zynq-7000"; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 5 4>, <0 6 4>; + interrupt-parent = <&intc>; + reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; + }; + amba { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index dc8dd0de5c0f..53e68b163196 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -11,3 +11,6 @@ obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o +obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o +AFLAGS_mcpm_head.o := -march=armv7-a +AFLAGS_vlock.o := -march=armv7-a diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c new file mode 100644 index 000000000000..370236dd1a03 --- /dev/null +++ b/arch/arm/common/mcpm_entry.c @@ -0,0 +1,263 @@ +/* + * arch/arm/common/mcpm_entry.c -- entry point for multi-cluster PM + * + * Created by: Nicolas Pitre, March 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irqflags.h> + +#include <asm/mcpm.h> +#include <asm/cacheflush.h> +#include <asm/idmap.h> +#include <asm/cputype.h> + +extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; + +void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr) +{ + unsigned long val = ptr ? virt_to_phys(ptr) : 0; + mcpm_entry_vectors[cluster][cpu] = val; + sync_cache_w(&mcpm_entry_vectors[cluster][cpu]); +} + +static const struct mcpm_platform_ops *platform_ops; + +int __init mcpm_platform_register(const struct mcpm_platform_ops *ops) +{ + if (platform_ops) + return -EBUSY; + platform_ops = ops; + return 0; +} + +int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) +{ + if (!platform_ops) + return -EUNATCH; /* try not to shadow power_up errors */ + might_sleep(); + return platform_ops->power_up(cpu, cluster); +} + +typedef void (*phys_reset_t)(unsigned long); + +void mcpm_cpu_power_down(void) +{ + phys_reset_t phys_reset; + + BUG_ON(!platform_ops); + BUG_ON(!irqs_disabled()); + + /* + * Do this before calling into the power_down method, + * as it might not always be safe to do afterwards. + */ + setup_mm_for_reboot(); + + platform_ops->power_down(); + + /* + * It is possible for a power_up request to happen concurrently + * with a power_down request for the same CPU. In this case the + * power_down method might not be able to actually enter a + * powered down state with the WFI instruction if the power_up + * method has removed the required reset condition. The + * power_down method is then allowed to return. We must perform + * a re-entry in the kernel as if the power_up method just had + * deasserted reset on the CPU. + * + * To simplify race issues, the platform specific implementation + * must accommodate for the possibility of unordered calls to + * power_down and power_up with a usage count. Therefore, if a + * call to power_up is issued for a CPU that is not down, then + * the next call to power_down must not attempt a full shutdown + * but only do the minimum (normally disabling L1 cache and CPU + * coherency) and return just as if a concurrent power_up request + * had happened as described above. + */ + + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + + /* should never get here */ + BUG(); +} + +void mcpm_cpu_suspend(u64 expected_residency) +{ + phys_reset_t phys_reset; + + BUG_ON(!platform_ops); + BUG_ON(!irqs_disabled()); + + /* Very similar to mcpm_cpu_power_down() */ + setup_mm_for_reboot(); + platform_ops->suspend(expected_residency); + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + BUG(); +} + +int mcpm_cpu_powered_up(void) +{ + if (!platform_ops) + return -EUNATCH; + if (platform_ops->powered_up) + platform_ops->powered_up(); + return 0; +} + +struct sync_struct mcpm_sync; + +/* + * __mcpm_cpu_going_down: Indicates that the cpu is being torn down. + * This must be called at the point of committing to teardown of a CPU. + * The CPU cache (SCTRL.C bit) is expected to still be active. + */ +void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster) +{ + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); +} + +/* + * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the + * cluster can be torn down without disrupting this CPU. + * To avoid deadlocks, this must be called before a CPU is powered down. + * The CPU cache (SCTRL.C bit) is expected to be off. + * However L2 cache might or might not be active. + */ +void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster) +{ + dmb(); + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); + dsb_sev(); +} + +/* + * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section. + * @state: the final state of the cluster: + * CLUSTER_UP: no destructive teardown was done and the cluster has been + * restored to the previous state (CPU cache still active); or + * CLUSTER_DOWN: the cluster has been torn-down, ready for power-off + * (CPU cache disabled, L2 cache either enabled or disabled). + */ +void __mcpm_outbound_leave_critical(unsigned int cluster, int state) +{ + dmb(); + mcpm_sync.clusters[cluster].cluster = state; + sync_cache_w(&mcpm_sync.clusters[cluster].cluster); + dsb_sev(); +} + +/* + * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section. + * This function should be called by the last man, after local CPU teardown + * is complete. CPU cache expected to be active. + * + * Returns: + * false: the critical section was not entered because an inbound CPU was + * observed, or the cluster is already being set up; + * true: the critical section was entered: it is now safe to tear down the + * cluster. + */ +bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster) +{ + unsigned int i; + struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster]; + + /* Warn inbound CPUs that the cluster is being torn down: */ + c->cluster = CLUSTER_GOING_DOWN; + sync_cache_w(&c->cluster); + + /* Back out if the inbound cluster is already in the critical region: */ + sync_cache_r(&c->inbound); + if (c->inbound == INBOUND_COMING_UP) + goto abort; + + /* + * Wait for all CPUs to get out of the GOING_DOWN state, so that local + * teardown is complete on each CPU before tearing down the cluster. + * + * If any CPU has been woken up again from the DOWN state, then we + * shouldn't be taking the cluster down at all: abort in that case. + */ + sync_cache_r(&c->cpus); + for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) { + int cpustate; + + if (i == cpu) + continue; + + while (1) { + cpustate = c->cpus[i].cpu; + if (cpustate != CPU_GOING_DOWN) + break; + + wfe(); + sync_cache_r(&c->cpus[i].cpu); + } + + switch (cpustate) { + case CPU_DOWN: + continue; + + default: + goto abort; + } + } + + return true; + +abort: + __mcpm_outbound_leave_critical(cluster, CLUSTER_UP); + return false; +} + +int __mcpm_cluster_state(unsigned int cluster) +{ + sync_cache_r(&mcpm_sync.clusters[cluster].cluster); + return mcpm_sync.clusters[cluster].cluster; +} + +extern unsigned long mcpm_power_up_setup_phys; + +int __init mcpm_sync_init( + void (*power_up_setup)(unsigned int affinity_level)) +{ + unsigned int i, j, mpidr, this_cluster; + + BUILD_BUG_ON(MCPM_SYNC_CLUSTER_SIZE * MAX_NR_CLUSTERS != sizeof mcpm_sync); + BUG_ON((unsigned long)&mcpm_sync & (__CACHE_WRITEBACK_GRANULE - 1)); + + /* + * Set initial CPU and cluster states. + * Only one cluster is assumed to be active at this point. + */ + for (i = 0; i < MAX_NR_CLUSTERS; i++) { + mcpm_sync.clusters[i].cluster = CLUSTER_DOWN; + mcpm_sync.clusters[i].inbound = INBOUND_NOT_COMING_UP; + for (j = 0; j < MAX_CPUS_PER_CLUSTER; j++) + mcpm_sync.clusters[i].cpus[j].cpu = CPU_DOWN; + } + mpidr = read_cpuid_mpidr(); + this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + for_each_online_cpu(i) + mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP; + mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP; + sync_cache_w(&mcpm_sync); + + if (power_up_setup) { + mcpm_power_up_setup_phys = virt_to_phys(power_up_setup); + sync_cache_w(&mcpm_power_up_setup_phys); + } + + return 0; +} diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S new file mode 100644 index 000000000000..8178705c4b24 --- /dev/null +++ b/arch/arm/common/mcpm_head.S @@ -0,0 +1,219 @@ +/* + * arch/arm/common/mcpm_head.S -- kernel entry point for multi-cluster PM + * + * Created by: Nicolas Pitre, March 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * Refer to Documentation/arm/cluster-pm-race-avoidance.txt + * for details of the synchronisation algorithms used here. + */ + +#include <linux/linkage.h> +#include <asm/mcpm.h> + +#include "vlock.h" + +.if MCPM_SYNC_CLUSTER_CPUS +.error "cpus must be the first member of struct mcpm_sync_struct" +.endif + + .macro pr_dbg string +#if defined(CONFIG_DEBUG_LL) && defined(DEBUG) + b 1901f +1902: .asciz "CPU" +1903: .asciz " cluster" +1904: .asciz ": \string" + .align +1901: adr r0, 1902b + bl printascii + mov r0, r9 + bl printhex8 + adr r0, 1903b + bl printascii + mov r0, r10 + bl printhex8 + adr r0, 1904b + bl printascii +#endif + .endm + + .arm + .align + +ENTRY(mcpm_entry_point) + + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) + THUMB( .thumb ) +1: + mrc p15, 0, r0, c0, c0, 5 @ MPIDR + ubfx r9, r0, #0, #8 @ r9 = cpu + ubfx r10, r0, #8, #8 @ r10 = cluster + mov r3, #MAX_CPUS_PER_CLUSTER + mla r4, r3, r10, r9 @ r4 = canonical CPU index + cmp r4, #(MAX_CPUS_PER_CLUSTER * MAX_NR_CLUSTERS) + blo 2f + + /* We didn't expect this CPU. Try to cheaply make it quiet. */ +1: wfi + wfe + b 1b + +2: pr_dbg "kernel mcpm_entry_point\n" + + /* + * MMU is off so we need to get to various variables in a + * position independent way. + */ + adr r5, 3f + ldmia r5, {r6, r7, r8, r11} + add r6, r5, r6 @ r6 = mcpm_entry_vectors + ldr r7, [r5, r7] @ r7 = mcpm_power_up_setup_phys + add r8, r5, r8 @ r8 = mcpm_sync + add r11, r5, r11 @ r11 = first_man_locks + + mov r0, #MCPM_SYNC_CLUSTER_SIZE + mla r8, r0, r10, r8 @ r8 = sync cluster base + + @ Signal that this CPU is coming UP: + mov r0, #CPU_COMING_UP + mov r5, #MCPM_SYNC_CPU_SIZE + mla r5, r9, r5, r8 @ r5 = sync cpu address + strb r0, [r5] + + @ At this point, the cluster cannot unexpectedly enter the GOING_DOWN + @ state, because there is at least one active CPU (this CPU). + + mov r0, #VLOCK_SIZE + mla r11, r0, r10, r11 @ r11 = cluster first man lock + mov r0, r11 + mov r1, r9 @ cpu + bl vlock_trylock @ implies DMB + + cmp r0, #0 @ failed to get the lock? + bne mcpm_setup_wait @ wait for cluster setup if so + + ldrb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + cmp r0, #CLUSTER_UP @ cluster already up? + bne mcpm_setup @ if not, set up the cluster + + @ Otherwise, release the first man lock and skip setup: + mov r0, r11 + bl vlock_unlock + b mcpm_setup_complete + +mcpm_setup: + @ Control dependency implies strb not observable before previous ldrb. + + @ Signal that the cluster is being brought up: + mov r0, #INBOUND_COMING_UP + strb r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND] + dmb + + @ Any CPU trying to take the cluster into CLUSTER_GOING_DOWN from this + @ point onwards will observe INBOUND_COMING_UP and abort. + + @ Wait for any previously-pending cluster teardown operations to abort + @ or complete: +mcpm_teardown_wait: + ldrb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + cmp r0, #CLUSTER_GOING_DOWN + bne first_man_setup + wfe + b mcpm_teardown_wait + +first_man_setup: + dmb + + @ If the outbound gave up before teardown started, skip cluster setup: + + cmp r0, #CLUSTER_UP + beq mcpm_setup_leave + + @ power_up_setup is now responsible for setting up the cluster: + + cmp r7, #0 + mov r0, #1 @ second (cluster) affinity level + blxne r7 @ Call power_up_setup if defined + dmb + + mov r0, #CLUSTER_UP + strb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + dmb + +mcpm_setup_leave: + @ Leave the cluster setup critical section: + + mov r0, #INBOUND_NOT_COMING_UP + strb r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND] + dsb + sev + + mov r0, r11 + bl vlock_unlock @ implies DMB + b mcpm_setup_complete + + @ In the contended case, non-first men wait here for cluster setup + @ to complete: +mcpm_setup_wait: + ldrb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + cmp r0, #CLUSTER_UP + wfene + bne mcpm_setup_wait + dmb + +mcpm_setup_complete: + @ If a platform-specific CPU setup hook is needed, it is + @ called from here. + + cmp r7, #0 + mov r0, #0 @ first (CPU) affinity level + blxne r7 @ Call power_up_setup if defined + dmb + + @ Mark the CPU as up: + + mov r0, #CPU_UP + strb r0, [r5] + + @ Observability order of CPU_UP and opening of the gate does not matter. + +mcpm_entry_gated: + ldr r5, [r6, r4, lsl #2] @ r5 = CPU entry vector + cmp r5, #0 + wfeeq + beq mcpm_entry_gated + dmb + + pr_dbg "released\n" + bx r5 + + .align 2 + +3: .word mcpm_entry_vectors - . + .word mcpm_power_up_setup_phys - 3b + .word mcpm_sync - 3b + .word first_man_locks - 3b + +ENDPROC(mcpm_entry_point) + + .bss + + .align CACHE_WRITEBACK_ORDER + .type first_man_locks, #object +first_man_locks: + .space VLOCK_SIZE * MAX_NR_CLUSTERS + .align CACHE_WRITEBACK_ORDER + + .type mcpm_entry_vectors, #object +ENTRY(mcpm_entry_vectors) + .space 4 * MAX_NR_CLUSTERS * MAX_CPUS_PER_CLUSTER + + .type mcpm_power_up_setup_phys, #object +ENTRY(mcpm_power_up_setup_phys) + .space 4 @ set by mcpm_sync_init() diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c new file mode 100644 index 000000000000..52b88d81b7bb --- /dev/null +++ b/arch/arm/common/mcpm_platsmp.c @@ -0,0 +1,92 @@ +/* + * linux/arch/arm/mach-vexpress/mcpm_platsmp.c + * + * Created by: Nicolas Pitre, November 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Code to handle secondary CPU bringup and hotplug for the cluster power API. + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/spinlock.h> + +#include <linux/irqchip/arm-gic.h> + +#include <asm/mcpm.h> +#include <asm/smp.h> +#include <asm/smp_plat.h> + +static void __init simple_smp_init_cpus(void) +{ +} + +static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned int mpidr, pcpu, pcluster, ret; + extern void secondary_startup(void); + + mpidr = cpu_logical_map(cpu); + pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: logical CPU %d is physical CPU %d cluster %d\n", + __func__, cpu, pcpu, pcluster); + + mcpm_set_entry_vector(pcpu, pcluster, NULL); + ret = mcpm_cpu_power_up(pcpu, pcluster); + if (ret) + return ret; + mcpm_set_entry_vector(pcpu, pcluster, secondary_startup); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + dsb_sev(); + return 0; +} + +static void __cpuinit mcpm_secondary_init(unsigned int cpu) +{ + mcpm_cpu_powered_up(); + gic_secondary_init(0); +} + +#ifdef CONFIG_HOTPLUG_CPU + +static int mcpm_cpu_disable(unsigned int cpu) +{ + /* + * We assume all CPUs may be shut down. + * This would be the hook to use for eventual Secure + * OS migration requests as described in the PSCI spec. + */ + return 0; +} + +static void mcpm_cpu_die(unsigned int cpu) +{ + unsigned int mpidr, pcpu, pcluster; + mpidr = read_cpuid_mpidr(); + pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + mcpm_set_entry_vector(pcpu, pcluster, NULL); + mcpm_cpu_power_down(); +} + +#endif + +static struct smp_operations __initdata mcpm_smp_ops = { + .smp_init_cpus = simple_smp_init_cpus, + .smp_boot_secondary = mcpm_boot_secondary, + .smp_secondary_init = mcpm_secondary_init, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = mcpm_cpu_disable, + .cpu_die = mcpm_cpu_die, +#endif +}; + +void __init mcpm_smp_set_ops(void) +{ + smp_set_ops(&mcpm_smp_ops); +} diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S new file mode 100644 index 000000000000..ff198583f683 --- /dev/null +++ b/arch/arm/common/vlock.S @@ -0,0 +1,108 @@ +/* + * vlock.S - simple voting lock implementation for ARM + * + * Created by: Dave Martin, 2012-08-16 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * This algorithm is described in more detail in + * Documentation/arm/vlocks.txt. + */ + +#include <linux/linkage.h> +#include "vlock.h" + +/* Select different code if voting flags can fit in a single word. */ +#if VLOCK_VOTING_SIZE > 4 +#define FEW(x...) +#define MANY(x...) x +#else +#define FEW(x...) x +#define MANY(x...) +#endif + +@ voting lock for first-man coordination + +.macro voting_begin rbase:req, rcpu:req, rscratch:req + mov \rscratch, #1 + strb \rscratch, [\rbase, \rcpu] + dmb +.endm + +.macro voting_end rbase:req, rcpu:req, rscratch:req + dmb + mov \rscratch, #0 + strb \rscratch, [\rbase, \rcpu] + dsb + sev +.endm + +/* + * The vlock structure must reside in Strongly-Ordered or Device memory. + * This implementation deliberately eliminates most of the barriers which + * would be required for other memory types, and assumes that independent + * writes to neighbouring locations within a cacheline do not interfere + * with one another. + */ + +@ r0: lock structure base +@ r1: CPU ID (0-based index within cluster) +ENTRY(vlock_trylock) + add r1, r1, #VLOCK_VOTING_OFFSET + + voting_begin r0, r1, r2 + + ldrb r2, [r0, #VLOCK_OWNER_OFFSET] @ check whether lock is held + cmp r2, #VLOCK_OWNER_NONE + bne trylock_fail @ fail if so + + @ Control dependency implies strb not observable before previous ldrb. + + strb r1, [r0, #VLOCK_OWNER_OFFSET] @ submit my vote + + voting_end r0, r1, r2 @ implies DMB + + @ Wait for the current round of voting to finish: + + MANY( mov r3, #VLOCK_VOTING_OFFSET ) +0: + MANY( ldr r2, [r0, r3] ) + FEW( ldr r2, [r0, #VLOCK_VOTING_OFFSET] ) + cmp r2, #0 + wfene + bne 0b + MANY( add r3, r3, #4 ) + MANY( cmp r3, #VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE ) + MANY( bne 0b ) + + @ Check who won: + + dmb + ldrb r2, [r0, #VLOCK_OWNER_OFFSET] + eor r0, r1, r2 @ zero if I won, else nonzero + bx lr + +trylock_fail: + voting_end r0, r1, r2 + mov r0, #1 @ nonzero indicates that I lost + bx lr +ENDPROC(vlock_trylock) + +@ r0: lock structure base +ENTRY(vlock_unlock) + dmb + mov r1, #VLOCK_OWNER_NONE + strb r1, [r0, #VLOCK_OWNER_OFFSET] + dsb + sev + bx lr +ENDPROC(vlock_unlock) diff --git a/arch/arm/common/vlock.h b/arch/arm/common/vlock.h new file mode 100644 index 000000000000..3b441475a59b --- /dev/null +++ b/arch/arm/common/vlock.h @@ -0,0 +1,29 @@ +/* + * vlock.h - simple voting lock implementation + * + * Created by: Dave Martin, 2012-08-16 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __VLOCK_H +#define __VLOCK_H + +#include <asm/mcpm.h> + +/* Offsets and sizes are rounded to a word (4 bytes) */ +#define VLOCK_OWNER_OFFSET 0 +#define VLOCK_VOTING_OFFSET 4 +#define VLOCK_VOTING_SIZE ((MAX_CPUS_PER_CLUSTER + 3) / 4 * 4) +#define VLOCK_SIZE (VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE) +#define VLOCK_OWNER_NONE 0 + +#endif /* ! __VLOCK_H */ diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig new file mode 100644 index 000000000000..dab5a7dfadc6 --- /dev/null +++ b/arch/arm/configs/ape6evm_defconfig @@ -0,0 +1,95 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CGROUPS=y +CONFIG_CGROUP_SCHED=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +# CONFIG_BLOCK is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R8A73A4=y +CONFIG_MACH_APE6EVM=y +# CONFIG_ARM_THUMB is not set +CONFIG_CPU_BPREDICT_DISABLE=y +CONFIG_PL310_ERRATA_588369=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_SMP=y +CONFIG_SCHED_MC=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_NR_CPUS=8 +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +# CONFIG_HW_PERF_EVENTS is not set +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_ARM_APPENDED_DTB=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6_SIT is not set +CONFIG_NETFILTER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_FW_LOADER_USER_HELPER is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=12 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_GPIO_SH_PFC=y +CONFIG_GPIOLIB=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_RCAR_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_ENABLE_DEFAULT_TRACERS=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 0b98100d2ae7..0f2d80da7378 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -20,15 +20,19 @@ CONFIG_ARCH_R8A7740=y CONFIG_MACH_ARMADILLO800EVA=y # CONFIG_SH_TIMER_TMU is not set CONFIG_ARM_THUMB=y -CONFIG_CPU_BPREDICT_DISABLE=y CONFIG_CACHE_L2X0=y CONFIG_ARM_ERRATA_430973=y CONFIG_ARM_ERRATA_458693=y CONFIG_ARM_ERRATA_460075=y +CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_720789=y +CONFIG_PL310_ERRATA_727915=y CONFIG_ARM_ERRATA_743622=y CONFIG_ARM_ERRATA_751472=y +CONFIG_PL310_ERRATA_753970=y CONFIG_ARM_ERRATA_754322=y +CONFIG_PL310_ERRATA_769419=y +CONFIG_ARM_ERRATA_775420=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_FORCE_MAX_ZONEORDER=13 @@ -37,6 +41,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y CONFIG_VFP=y +CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y CONFIG_NET=y @@ -88,6 +93,7 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set +CONFIG_REGULATOR=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_MEDIA_CAMERA_SUPPORT=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 1ea959019fcd..047f2a415309 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -20,7 +20,7 @@ CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y CONFIG_SOC_AT91SAM9N12=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 0ea5d2c97fc4..05618eb694f8 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -22,7 +22,7 @@ CONFIG_MACH_QIL_A9260=y CONFIG_MACH_CPU9260=y CONFIG_MACH_FLEXIBITY=y CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 3b1881033ad8..892e8287ed73 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -22,7 +22,7 @@ CONFIG_MACH_PCONTROL_G20=y CONFIG_MACH_GSIA18S=y CONFIG_MACH_USB_A9G20=y CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 606d48f3b8f8..5f551b76cb65 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -18,7 +18,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G45=y CONFIG_MACH_AT91SAM9M10G45EK=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index af472e4ed451..ce987211a609 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -29,6 +29,8 @@ CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y +CONFIG_ARCH_MULTI_V6=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_BCM2835=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y @@ -59,10 +61,13 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_TTY_PRINTK=y -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_BCM2835=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_BCM2835=y +CONFIG_SPI=y +CONFIG_SPI_BCM2835=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set # CONFIG_USB_SUPPORT is not set @@ -108,9 +113,5 @@ CONFIG_TEST_KSTRTOX=y CONFIG_STRICT_DEVMEM=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_IA64 is not set # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set -# CONFIG_XZ_DEC_SPARC is not set diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig index 313627adf46c..b1ff5cdba9a1 100644 --- a/arch/arm/configs/cns3420vb_defconfig +++ b/arch/arm/configs/cns3420vb_defconfig @@ -19,8 +19,11 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set CONFIG_IOSCHED_CFQ=m +CONFIG_ARCH_MULTI_V6=y +#CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_CNS3XXX=y CONFIG_MACH_CNS3420VB=y +CONFIG_DEBUG_CNS3XXX=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 3fe8dae8d32d..4364eff5b01e 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -75,6 +75,8 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_DOVE_THERMAL=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig deleted file mode 100644 index bee94d29655e..000000000000 --- a/arch/arm/configs/h7201_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_ARCH_H720X=y -CONFIG_ARCH_H7201=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_EXT2_FS=y -CONFIG_JFFS2_FS=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig deleted file mode 100644 index e16d3f372e2a..000000000000 --- a/arch/arm/configs/h7202_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_MODULES=y -CONFIG_ARCH_H720X=y -CONFIG_ARCH_H7202=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,19200" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_H720X=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_USB_GADGET=m -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_EXT2_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index e36b01025321..088d6c11a0fa 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -188,6 +188,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 13482ea58b09..3d8667f648b8 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -56,7 +56,6 @@ CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_KIRKWOOD=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -119,6 +118,8 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_KIRKWOOD_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_HID_DRAGONRISE=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index 670c3b60f936..f6e585b353a4 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -33,7 +33,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_SCHED_MC=y -CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_HIGHMEM=y @@ -86,7 +85,6 @@ CONFIG_I2C_SH_MOBILE=y CONFIG_GPIO_PCF857X=y # CONFIG_HWMON is not set CONFIG_REGULATOR=y -CONFIG_REGULATOR_DUMMY=y CONFIG_FB=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 92386b20bd09..398a367ffce8 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -18,6 +17,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_LPC32XX=y +CONFIG_GPIO_PCA953X=y CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -48,6 +48,8 @@ CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -55,7 +57,6 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MUSEUM_IDS=y CONFIG_MTD_NAND_SLC_LPC32XX=y CONFIG_MTD_NAND_MLC_LPC32XX=y CONFIG_BLK_DEV_LOOP=y @@ -70,7 +71,6 @@ CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_MII=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_CIRRUS is not set # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_INTEL is not set @@ -84,7 +84,6 @@ CONFIG_LPC_ENET=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set -CONFIG_INPUT_MATRIXKMAP=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 @@ -108,6 +107,19 @@ CONFIG_I2C_PNX=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_EM=y +CONFIG_GPIO_PL061=y +CONFIG_GPIO_MAX7300=y +CONFIG_GPIO_MAX732X=y +CONFIG_GPIO_PCF857X=y +CONFIG_GPIO_SX150X=y +CONFIG_GPIO_ADP5588=y +CONFIG_GPIO_ADNP=y +CONFIG_GPIO_MAX7301=y +CONFIG_GPIO_MCP23S08=y +CONFIG_GPIO_MC33880=y +CONFIG_GPIO_74X164=y CONFIG_SENSORS_DS620=y CONFIG_SENSORS_MAX6639=y CONFIG_WATCHDOG=y @@ -134,6 +146,7 @@ CONFIG_SND_DEBUG_VERBOSE=y # CONFIG_SND_SPI is not set CONFIG_SND_SOC=y CONFIG_USB=y +CONFIG_USB_PHY=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y @@ -143,6 +156,7 @@ CONFIG_USB_G_SERIAL=m CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_PCA9532=y diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig index 7594b3aff259..9fb11895b2e2 100644 --- a/arch/arm/configs/mackerel_defconfig +++ b/arch/arm/configs/mackerel_defconfig @@ -75,6 +75,7 @@ CONFIG_I2C=y CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set # CONFIG_MFD_SUPPORT is not set +CONFIG_REGULATOR=y CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SH_MOBILE_LCDC=y @@ -94,6 +95,9 @@ CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_MMC=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index afb17d630d44..494e70aeb9e1 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -49,6 +49,10 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_ATA_SFF=y +CONFIG_ATA_BMDMA=y +CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_FARADAY is not set @@ -75,6 +79,7 @@ CONFIG_I2C_RCAR=y CONFIG_SPI=y CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_RCAR=y # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_RCAR_THERMAL=y @@ -88,6 +93,9 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e31d442343c8..2e67a272df70 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -3,13 +3,19 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y +CONFIG_ARCH_SIRF=y CONFIG_MACH_ARMADA_XP=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_SOCFPGA=y CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_WM8850=y # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set CONFIG_ARCH_ZYNQ=y CONFIG_ARM_ERRATA_754322=y +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR13XX=y +CONFIG_MACH_SPEAR1310=y +CONFIG_MACH_SPEAR1340=y CONFIG_SMP=y CONFIG_ARM_ARCH_TIMER=y CONFIG_AEABI=y @@ -23,6 +29,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y +CONFIG_SATA_AHCI_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_SMSC911X=y @@ -31,17 +38,26 @@ CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y +CONFIG_KEYBOARD_SPEAR=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_SIRFSOC=y +CONFIG_SERIAL_SIRFSOC_CONSOLE=y +CONFIG_SERIAL_VT8500=y +CONFIG_SERIAL_VT8500_CONSOLE=y CONFIG_IPMI_HANDLER=y CONFIG_IPMI_SI=y CONFIG_I2C=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_SIRF=y CONFIG_SPI=y CONFIG_SPI_PL022=y +CONFIG_SPI_SIRF=y +CONFIG_GPIO_PL061=y CONFIG_FB=y CONFIG_FB_ARMCLCD=y +CONFIG_FB_WM8505=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_USB=y CONFIG_USB_ISP1760_HCD=y @@ -50,11 +66,18 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_WMT=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y CONFIG_EDAC_HIGHBANK_L2=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_VT8500=y +CONFIG_PWM=y +CONFIG_PWM_VT8500=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y +CONFIG_SIRF_DMA=y +CONFIG_DW_DMAC=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 2ec8119cff73..f3e8ae001ff1 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -46,9 +46,16 @@ CONFIG_I2C_MV64XXX=y CONFIG_MTD=y CONFIG_MTD_CHAR=y CONFIG_MTD_M25P80=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP_OF=y CONFIG_SERIAL_8250_DW=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +CONFIG_THERMAL=y +CONFIG_ARMADA_THERMAL=y CONFIG_USB_SUPPORT=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y @@ -65,6 +72,8 @@ CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y CONFIG_MV_XOR=y +CONFIG_MEMORY=y +CONFIG_MVEBU_DEVBUS=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 6a99e30f81d2..1d6d8fb7f4a1 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -22,8 +22,8 @@ CONFIG_MODVERSIONS=y CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MXS=y -CONFIG_MACH_MXS_DT=y # CONFIG_ARM_THUMB is not set CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y @@ -75,7 +75,7 @@ CONFIG_REALTEK_PHY=y CONFIG_MICREL_PHY=y # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y @@ -99,6 +99,8 @@ CONFIG_SPI_MXS=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_STMP3XXX_RTC_WATCHDOG=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y @@ -120,8 +122,10 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y +CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_MXS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 86cfd2959c47..b01e7632ed2e 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -1,11 +1,9 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y @@ -13,6 +11,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_NOMADIK=y CONFIG_MACH_NOMADIK_8815NHK=y CONFIG_PREEMPT=y @@ -20,7 +19,6 @@ CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_FPE_NWFPE=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -32,14 +30,10 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -53,14 +47,16 @@ CONFIG_BT_HCIVHCI=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_TESTS=m +CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_SMC=y +CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSMC=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y @@ -72,47 +68,48 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y +CONFIG_NETCONSOLE=m CONFIG_TUN=y -CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m -CONFIG_NETCONSOLE=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_NOMADIK=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y +CONFIG_I2C_NOMADIK=y CONFIG_DEBUG_GPIO=y -CONFIG_PINCTRL_NOMADIK=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y +CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_FUSE_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_ROOT_NFS=y -CONFIG_SMB_FS=m CONFIG_CIFS=m CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_NLS_CODEPAGE_437=y @@ -120,12 +117,11 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y # CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_DES=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 42eab9a2a0fd..7e0ebb64a7f9 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -195,6 +195,7 @@ CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y +CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig new file mode 100644 index 000000000000..4d0dc3c16063 --- /dev/null +++ b/arch/arm/configs/sama5_defconfig @@ -0,0 +1,181 @@ +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_SOC_SAM_V7=y +CONFIG_SOC_SAMA5D3=y +CONFIG_MACH_SAMA5_DT=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_UACCESS_WITH_MEMCPY=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_PM_DEBUG=y +CONFIG_PM_ADVANCED_DEBUG=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_IPV6_SIT_6RD=y +CONFIG_CAN=y +CONFIG_CAN_AT91=y +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_MAC80211_LEDS=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=y +CONFIG_EEPROM_AT24=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_MICREL_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_QT1070=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y +# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_GPIO=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +CONFIG_SSB=m +CONFIG_FB=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_HID_GENERIC is not set +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_AT91=y +CONFIG_USB_MASS_STORAGE=m +CONFIG_MMC=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_ATMELMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_DMADEVICES=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_AT91_ADC=y +CONFIG_EXT2_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_UBIFS_FS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_DEV_ATMEL_AES=y +CONFIG_CRYPTO_DEV_ATMEL_TDES=y +CONFIG_CRYPTO_DEV_ATMEL_SHA=y +CONFIG_CRC_CCITT=m +CONFIG_CRC_ITU_T=m diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index 865980c5f212..7ff23a077f5d 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -6,7 +6,9 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR3XX=y CONFIG_MACH_SPEAR300=y CONFIG_MACH_SPEAR310=y CONFIG_MACH_SPEAR320=y diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index a2a1265f86b6..7822980d7d55 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -6,6 +6,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR6XX=y CONFIG_BINFMT_MISC=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index aba4881d20e5..a5f0485133cf 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y @@ -20,15 +19,14 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y CONFIG_GPIO_PCA953X=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y +CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_TEGRA_PCI=y -CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_SMP=y CONFIG_PREEMPT=y @@ -37,8 +35,8 @@ CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_AUTO_ZRELADDR=y CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y @@ -108,6 +106,7 @@ CONFIG_RT2X00=y CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_TEGRA=y +CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set @@ -117,7 +116,6 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set -CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PINCTRL=y @@ -126,6 +124,7 @@ CONFIG_SPI=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_POWER_SUPPLY=y @@ -136,12 +135,17 @@ CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_TPS65090=y +CONFIG_MFD_PALMAS=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS62360=y +CONFIG_REGULATOR_TPS65090=y CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y CONFIG_MEDIA_SUPPORT=y @@ -187,10 +191,8 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_EM3027=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 426270fe080d..c037aa1065b7 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -5,7 +5,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_U8500=y CONFIG_MACH_HREFV60=y @@ -90,6 +89,8 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y @@ -103,6 +104,7 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index c79f61faa3a5..da1c77d39327 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -243,6 +243,29 @@ typedef struct { #define ATOMIC64_INIT(i) { (i) } +#ifdef CONFIG_ARM_LPAE +static inline u64 atomic64_read(const atomic64_t *v) +{ + u64 result; + + __asm__ __volatile__("@ atomic64_read\n" +" ldrd %0, %H0, [%1]" + : "=&r" (result) + : "r" (&v->counter), "Qo" (v->counter) + ); + + return result; +} + +static inline void atomic64_set(atomic64_t *v, u64 i) +{ + __asm__ __volatile__("@ atomic64_set\n" +" strd %2, %H2, [%1]" + : "=Qo" (v->counter) + : "r" (&v->counter), "r" (i) + ); +} +#else static inline u64 atomic64_read(const atomic64_t *v) { u64 result; @@ -269,6 +292,7 @@ static inline void atomic64_set(atomic64_t *v, u64 i) : "r" (&v->counter), "r" (i) : "cc"); } +#endif static inline void atomic64_add(u64 i, atomic64_t *v) { diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index e1489c54cd12..bff71388e72a 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -363,4 +363,79 @@ static inline void flush_cache_vunmap(unsigned long start, unsigned long end) flush_cache_all(); } +/* + * Memory synchronization helpers for mixed cached vs non cached accesses. + * + * Some synchronization algorithms have to set states in memory with the + * cache enabled or disabled depending on the code path. It is crucial + * to always ensure proper cache maintenance to update main memory right + * away in that case. + * + * Any cached write must be followed by a cache clean operation. + * Any cached read must be preceded by a cache invalidate operation. + * Yet, in the read case, a cache flush i.e. atomic clean+invalidate + * operation is needed to avoid discarding possible concurrent writes to the + * accessed memory. + * + * Also, in order to prevent a cached writer from interfering with an + * adjacent non-cached writer, each state variable must be located to + * a separate cache line. + */ + +/* + * This needs to be >= the max cache writeback size of all + * supported platforms included in the current kernel configuration. + * This is used to align state variables to their own cache lines. + */ +#define __CACHE_WRITEBACK_ORDER 6 /* guessed from existing platforms */ +#define __CACHE_WRITEBACK_GRANULE (1 << __CACHE_WRITEBACK_ORDER) + +/* + * There is no __cpuc_clean_dcache_area but we use it anyway for + * code intent clarity, and alias it to __cpuc_flush_dcache_area. + */ +#define __cpuc_clean_dcache_area __cpuc_flush_dcache_area + +/* + * Ensure preceding writes to *p by this CPU are visible to + * subsequent reads by other CPUs: + */ +static inline void __sync_cache_range_w(volatile void *p, size_t size) +{ + char *_p = (char *)p; + + __cpuc_clean_dcache_area(_p, size); + outer_clean_range(__pa(_p), __pa(_p + size)); +} + +/* + * Ensure preceding writes to *p by other CPUs are visible to + * subsequent reads by this CPU. We must be careful not to + * discard data simultaneously written by another CPU, hence the + * usage of flush rather than invalidate operations. + */ +static inline void __sync_cache_range_r(volatile void *p, size_t size) +{ + char *_p = (char *)p; + +#ifdef CONFIG_OUTER_CACHE + if (outer_cache.flush_range) { + /* + * Ensure dirty data migrated from other CPUs into our cache + * are cleaned out safely before the outer cache is cleaned: + */ + __cpuc_clean_dcache_area(_p, size); + + /* Clean and invalidate stale data for *p from outer ... */ + outer_flush_range(__pa(_p), __pa(_p + size)); + } +#endif + + /* ... and inner cache: */ + __cpuc_flush_dcache_area(_p, size); +} + +#define sync_cache_w(ptr) __sync_cache_range_w(ptr, sizeof *(ptr)) +#define sync_cache_r(ptr) __sync_cache_range_r(ptr, sizeof *(ptr)) + #endif diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 5ef4d8015a60..1f3262e99d81 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -42,6 +42,8 @@ #define vectors_high() (0) #endif +#ifdef CONFIG_CPU_CP15 + extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ @@ -82,6 +84,18 @@ static inline void set_copro_access(unsigned int val) isb(); } -#endif +#else /* ifdef CONFIG_CPU_CP15 */ + +/* + * cr_alignment and cr_no_alignment are tightly coupled to cp15 (at least in the + * minds of the developers). Yielding 0 for machines without a cp15 (and making + * it read-only) is fine for most cases and saves quite some #ifdeffery. + */ +#define cr_no_alignment UL(0) +#define cr_alignment UL(0) + +#endif /* ifdef CONFIG_CPU_CP15 / else */ + +#endif /* ifndef __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index ad41ec2471e8..7652712d1d14 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -38,6 +38,24 @@ #define MPIDR_AFFINITY_LEVEL(mpidr, level) \ ((mpidr >> (MPIDR_LEVEL_BITS * level)) & MPIDR_LEVEL_MASK) +#define ARM_CPU_IMP_ARM 0x41 +#define ARM_CPU_IMP_INTEL 0x69 + +#define ARM_CPU_PART_ARM1136 0xB360 +#define ARM_CPU_PART_ARM1156 0xB560 +#define ARM_CPU_PART_ARM1176 0xB760 +#define ARM_CPU_PART_ARM11MPCORE 0xB020 +#define ARM_CPU_PART_CORTEX_A8 0xC080 +#define ARM_CPU_PART_CORTEX_A9 0xC090 +#define ARM_CPU_PART_CORTEX_A5 0xC050 +#define ARM_CPU_PART_CORTEX_A15 0xC0F0 +#define ARM_CPU_PART_CORTEX_A7 0xC070 + +#define ARM_CPU_XSCALE_ARCH_MASK 0xe000 +#define ARM_CPU_XSCALE_ARCH_V1 0x2000 +#define ARM_CPU_XSCALE_ARCH_V2 0x4000 +#define ARM_CPU_XSCALE_ARCH_V3 0x6000 + extern unsigned int processor_id; #ifdef CONFIG_CPU_CP15 @@ -50,6 +68,7 @@ extern unsigned int processor_id; : "cc"); \ __val; \ }) + #define read_cpuid_ext(ext_reg) \ ({ \ unsigned int __val; \ @@ -59,29 +78,24 @@ extern unsigned int processor_id; : "cc"); \ __val; \ }) -#else -#define read_cpuid(reg) (processor_id) -#define read_cpuid_ext(reg) 0 -#endif -#define ARM_CPU_IMP_ARM 0x41 -#define ARM_CPU_IMP_INTEL 0x69 +#else /* ifdef CONFIG_CPU_CP15 */ -#define ARM_CPU_PART_ARM1136 0xB360 -#define ARM_CPU_PART_ARM1156 0xB560 -#define ARM_CPU_PART_ARM1176 0xB760 -#define ARM_CPU_PART_ARM11MPCORE 0xB020 -#define ARM_CPU_PART_CORTEX_A8 0xC080 -#define ARM_CPU_PART_CORTEX_A9 0xC090 -#define ARM_CPU_PART_CORTEX_A5 0xC050 -#define ARM_CPU_PART_CORTEX_A15 0xC0F0 -#define ARM_CPU_PART_CORTEX_A7 0xC070 +/* + * read_cpuid and read_cpuid_ext should only ever be called on machines that + * have cp15 so warn on other usages. + */ +#define read_cpuid(reg) \ + ({ \ + WARN_ON_ONCE(1); \ + 0; \ + }) -#define ARM_CPU_XSCALE_ARCH_MASK 0xe000 -#define ARM_CPU_XSCALE_ARCH_V1 0x2000 -#define ARM_CPU_XSCALE_ARCH_V2 0x4000 -#define ARM_CPU_XSCALE_ARCH_V3 0x6000 +#define read_cpuid_ext(reg) read_cpuid(reg) + +#endif /* ifdef CONFIG_CPU_CP15 / else */ +#ifdef CONFIG_CPU_CP15 /* * The CPU ID never changes at run time, so we might as well tell the * compiler that it's constant. Use this function to read the CPU ID @@ -92,6 +106,15 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void) return read_cpuid(CPUID_ID); } +#else /* ifdef CONFIG_CPU_CP15 */ + +static inline unsigned int __attribute_const__ read_cpuid_id(void) +{ + return processor_id; +} + +#endif /* ifdef CONFIG_CPU_CP15 / else */ + static inline unsigned int __attribute_const__ read_cpuid_implementor(void) { return (read_cpuid_id() & 0xFF000000) >> 24; diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index 720799fd3a81..dff714d886d5 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -24,7 +24,7 @@ extern struct arm_delay_ops { void (*delay)(unsigned long); void (*const_udelay)(unsigned long); void (*udelay)(unsigned long); - bool const_clock; + unsigned long ticks_per_jiffy; } arm_delay_ops; #define __delay(n) arm_delay_ops.delay(n) diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index cca9f15704ed..ea289e1435e7 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -19,14 +19,6 @@ #undef _CACHE #undef MULTI_CACHE -#if defined(CONFIG_CPU_CACHE_V3) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v3 -# endif -#endif - #if defined(CONFIG_CPU_CACHE_V4) # ifdef _CACHE # define MULTI_CACHE 1 diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h index 8cacbcda76da..b6e9f2c108b5 100644 --- a/arch/arm/include/asm/glue-df.h +++ b/arch/arm/include/asm/glue-df.h @@ -18,12 +18,12 @@ * ================ * * We have the following to choose from: - * arm6 - ARM6 style * arm7 - ARM7 style * v4_early - ARMv4 without Thumb early abort handler * v4t_late - ARMv4 with Thumb late abort handler * v4t_early - ARMv4 with Thumb early abort handler - * v5tej_early - ARMv5 with Thumb and Java early abort handler + * v5t_early - ARMv5 with Thumb early abort handler + * v5tj_early - ARMv5 with Thumb and Java early abort handler * xscale - ARMv5 with Thumb with Xscale extensions * v6_early - ARMv6 generic early abort handler * v7_early - ARMv7 generic early abort handler @@ -39,19 +39,19 @@ # endif #endif -#ifdef CONFIG_CPU_ABRT_LV4T +#ifdef CONFIG_CPU_ABRT_EV4 # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 # else -# define CPU_DABORT_HANDLER v4t_late_abort +# define CPU_DABORT_HANDLER v4_early_abort # endif #endif -#ifdef CONFIG_CPU_ABRT_EV4 +#ifdef CONFIG_CPU_ABRT_LV4T # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 # else -# define CPU_DABORT_HANDLER v4_early_abort +# define CPU_DABORT_HANDLER v4t_late_abort # endif #endif @@ -63,19 +63,19 @@ # endif #endif -#ifdef CONFIG_CPU_ABRT_EV5TJ +#ifdef CONFIG_CPU_ABRT_EV5T # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 # else -# define CPU_DABORT_HANDLER v5tj_early_abort +# define CPU_DABORT_HANDLER v5t_early_abort # endif #endif -#ifdef CONFIG_CPU_ABRT_EV5T +#ifdef CONFIG_CPU_ABRT_EV5TJ # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 # else -# define CPU_DABORT_HANDLER v5t_early_abort +# define CPU_DABORT_HANDLER v5tj_early_abort # endif #endif diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 02fe2fbe2477..ed94b1a366ae 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -37,7 +37,7 @@ extern int iop3xx_get_init_atu(void); * IOP3XX processor registers */ #define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 -#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 +#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfedfe000 #define IOP3XX_PERIPHERAL_SIZE 0x00002000 #define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\ IOP3XX_PERIPHERAL_SIZE - 1) diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 8c5e828f484d..91b99abe7a95 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -41,6 +41,13 @@ extern void kunmap_high(struct page *page); #endif #endif +/* + * Needed to be able to broadcast the TLB invalidation for kmap. + */ +#ifdef CONFIG_ARM_ERRATA_798181 +#undef ARCH_NEEDS_KMAP_HIGH_GET +#endif + #ifdef ARCH_NEEDS_KMAP_HIGH_GET extern void *kmap_high_get(struct page *page); #else diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 35c21c375d81..53c15dec7af6 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -30,6 +30,11 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *); void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); +#ifdef CONFIG_MULTI_IRQ_HANDLER +extern void (*handle_arch_irq)(struct pt_regs *); +extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); +#endif + #endif #endif diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index 7c3d813e15df..124623e5ef14 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -211,4 +211,8 @@ #define HSR_HVC_IMM_MASK ((1UL << 16) - 1) +#define HSR_DABT_S1PTW (1U << 7) +#define HSR_DABT_CM (1U << 8) +#define HSR_DABT_EA (1U << 9) + #endif /* __ARM_KVM_ARM_H__ */ diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index e4956f4e23e1..18d50322a9e2 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -75,7 +75,7 @@ extern char __kvm_hyp_code_end[]; extern void __kvm_tlb_flush_vmid(struct kvm *kvm); extern void __kvm_flush_vm_context(void); -extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); #endif diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index fd611996bfb5..82b4babead2c 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -22,11 +22,12 @@ #include <linux/kvm_host.h> #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> +#include <asm/kvm_arm.h> -u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num); -u32 *vcpu_spsr(struct kvm_vcpu *vcpu); +unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num); +unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu); -int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run); +bool kvm_condition_valid(struct kvm_vcpu *vcpu); void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr); void kvm_inject_undefined(struct kvm_vcpu *vcpu); void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr); @@ -37,14 +38,14 @@ static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu) return 1; } -static inline u32 *vcpu_pc(struct kvm_vcpu *vcpu) +static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu) { - return (u32 *)&vcpu->arch.regs.usr_regs.ARM_pc; + return &vcpu->arch.regs.usr_regs.ARM_pc; } -static inline u32 *vcpu_cpsr(struct kvm_vcpu *vcpu) +static inline unsigned long *vcpu_cpsr(struct kvm_vcpu *vcpu) { - return (u32 *)&vcpu->arch.regs.usr_regs.ARM_cpsr; + return &vcpu->arch.regs.usr_regs.ARM_cpsr; } static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) @@ -69,4 +70,96 @@ static inline bool kvm_vcpu_reg_is_pc(struct kvm_vcpu *vcpu, int reg) return reg == 15; } +static inline u32 kvm_vcpu_get_hsr(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.fault.hsr; +} + +static inline unsigned long kvm_vcpu_get_hfar(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.fault.hxfar; +} + +static inline phys_addr_t kvm_vcpu_get_fault_ipa(struct kvm_vcpu *vcpu) +{ + return ((phys_addr_t)vcpu->arch.fault.hpfar & HPFAR_MASK) << 8; +} + +static inline unsigned long kvm_vcpu_get_hyp_pc(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.fault.hyp_pc; +} + +static inline bool kvm_vcpu_dabt_isvalid(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_ISV; +} + +static inline bool kvm_vcpu_dabt_iswrite(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_WNR; +} + +static inline bool kvm_vcpu_dabt_issext(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_SSE; +} + +static inline int kvm_vcpu_dabt_get_rd(struct kvm_vcpu *vcpu) +{ + return (kvm_vcpu_get_hsr(vcpu) & HSR_SRT_MASK) >> HSR_SRT_SHIFT; +} + +static inline bool kvm_vcpu_dabt_isextabt(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_EA; +} + +static inline bool kvm_vcpu_dabt_iss1tw(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_S1PTW; +} + +/* Get Access Size from a data abort */ +static inline int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu) +{ + switch ((kvm_vcpu_get_hsr(vcpu) >> 22) & 0x3) { + case 0: + return 1; + case 1: + return 2; + case 2: + return 4; + default: + kvm_err("Hardware is weird: SAS 0b11 is reserved\n"); + return -EFAULT; + } +} + +/* This one is not specific to Data Abort */ +static inline bool kvm_vcpu_trap_il_is32bit(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_IL; +} + +static inline u8 kvm_vcpu_trap_get_class(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) >> HSR_EC_SHIFT; +} + +static inline bool kvm_vcpu_trap_is_iabt(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_trap_get_class(vcpu) == HSR_EC_IABT; +} + +static inline u8 kvm_vcpu_trap_get_fault(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_FSC_TYPE; +} + +static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_HVC_IMM_MASK; +} + #endif /* __ARM_KVM_EMULATE_H__ */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index d1736a53b12d..0c4e643d939e 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -80,6 +80,15 @@ struct kvm_mmu_memory_cache { void *objects[KVM_NR_MEM_OBJS]; }; +struct kvm_vcpu_fault_info { + u32 hsr; /* Hyp Syndrome Register */ + u32 hxfar; /* Hyp Data/Inst. Fault Address Register */ + u32 hpfar; /* Hyp IPA Fault Address Register */ + u32 hyp_pc; /* PC when exception was taken from Hyp mode */ +}; + +typedef struct vfp_hard_struct kvm_kernel_vfp_t; + struct kvm_vcpu_arch { struct kvm_regs regs; @@ -93,13 +102,11 @@ struct kvm_vcpu_arch { u32 midr; /* Exception Information */ - u32 hsr; /* Hyp Syndrome Register */ - u32 hxfar; /* Hyp Data/Inst Fault Address Register */ - u32 hpfar; /* Hyp IPA Fault Address Register */ + struct kvm_vcpu_fault_info fault; /* Floating point registers (VFP and Advanced SIMD/NEON) */ - struct vfp_hard_struct vfp_guest; - struct vfp_hard_struct *vfp_host; + kvm_kernel_vfp_t vfp_guest; + kvm_kernel_vfp_t *vfp_host; /* VGIC state */ struct vgic_cpu vgic_cpu; @@ -122,9 +129,6 @@ struct kvm_vcpu_arch { /* Interrupt related fields */ u32 irq_lines; /* IRQ and FIQ levels */ - /* Hyp exception information */ - u32 hyp_pc; /* PC when exception was taken from Hyp mode */ - /* Cache some mmu pages needed inside spinlock regions */ struct kvm_mmu_memory_cache mmu_page_cache; @@ -181,4 +185,26 @@ struct kvm_one_reg; int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); +int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, + int exception_index); + +static inline void __cpu_init_hyp_mode(unsigned long long pgd_ptr, + unsigned long hyp_stack_ptr, + unsigned long vector_ptr) +{ + unsigned long pgd_low, pgd_high; + + pgd_low = (pgd_ptr & ((1ULL << 32) - 1)); + pgd_high = (pgd_ptr >> 32ULL); + + /* + * Call initialization code, and switch to the full blown + * HYP code. The init code doesn't need to preserve these registers as + * r1-r3 and r12 are already callee save according to the AAPCS. + * Note that we slightly misuse the prototype by casing the pgd_low to + * a void *. + */ + kvm_call_hyp((void *)pgd_low, pgd_high, hyp_stack_ptr, vector_ptr); +} + #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 421a20b34874..970f3b5fa109 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -19,6 +19,18 @@ #ifndef __ARM_KVM_MMU_H__ #define __ARM_KVM_MMU_H__ +#include <asm/cacheflush.h> +#include <asm/pgalloc.h> +#include <asm/idmap.h> + +/* + * We directly use the kernel VA for the HYP, as we can directly share + * the mapping (HTTBR "covers" TTBR1). + */ +#define HYP_PAGE_OFFSET_MASK (~0UL) +#define HYP_PAGE_OFFSET PAGE_OFFSET +#define KERN_TO_HYP(kva) (kva) + int create_hyp_mappings(void *from, void *to); int create_hyp_io_mappings(void *from, void *to, phys_addr_t); void free_hyp_pmds(void); @@ -36,6 +48,16 @@ phys_addr_t kvm_mmu_get_httbr(void); int kvm_mmu_init(void); void kvm_clear_hyp_idmap(void); +static inline void kvm_set_pte(pte_t *pte, pte_t new_pte) +{ + pte_val(*pte) = new_pte; + /* + * flush_pmd_entry just takes a void pointer and cleans the necessary + * cache entries, so we can reuse the function for ptes. + */ + flush_pmd_entry(pte); +} + static inline bool kvm_is_write_fault(unsigned long hsr) { unsigned long hsr_ec = hsr >> HSR_EC_SHIFT; @@ -47,4 +69,49 @@ static inline bool kvm_is_write_fault(unsigned long hsr) return true; } +static inline void kvm_clean_pgd(pgd_t *pgd) +{ + clean_dcache_area(pgd, PTRS_PER_S2_PGD * sizeof(pgd_t)); +} + +static inline void kvm_clean_pmd_entry(pmd_t *pmd) +{ + clean_pmd_entry(pmd); +} + +static inline void kvm_clean_pte(pte_t *pte) +{ + clean_pte_table(pte); +} + +static inline void kvm_set_s2pte_writable(pte_t *pte) +{ + pte_val(*pte) |= L_PTE_S2_RDWR; +} + +struct kvm; + +static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn) +{ + /* + * If we are going to insert an instruction page and the icache is + * either VIPT or PIPT, there is a potential problem where the host + * (or another VM) may have used the same page as this guest, and we + * read incorrect data from the icache. If we're using a PIPT cache, + * we can invalidate just that page, but if we are using a VIPT cache + * we need to invalidate the entire icache - damn shame - as written + * in the ARM ARM (DDI 0406C.b - Page B3-1393). + * + * VIVT caches are tagged using both the ASID and the VMID and doesn't + * need any kind of flushing (DDI 0406C.b - Page B3-1392). + */ + if (icache_is_pipt()) { + unsigned long hva = gfn_to_hva(kvm, gfn); + __cpuc_coherent_user_range(hva, hva + PAGE_SIZE); + } else if (!icache_is_vivt_asid_tagged()) { + /* any kind of VIPT cache */ + __flush_icache_all(); + } +} + #endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/kvm_vgic.h b/arch/arm/include/asm/kvm_vgic.h index ab97207d9cd3..343744e4809c 100644 --- a/arch/arm/include/asm/kvm_vgic.h +++ b/arch/arm/include/asm/kvm_vgic.h @@ -21,7 +21,6 @@ #include <linux/kernel.h> #include <linux/kvm.h> -#include <linux/kvm_host.h> #include <linux/irqreturn.h> #include <linux/spinlock.h> #include <linux/types.h> diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index 18c883023339..2092ee1e1300 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -20,11 +20,6 @@ struct seq_file; extern void init_FIQ(int); extern int show_fiq_list(struct seq_file *, int); -#ifdef CONFIG_MULTI_IRQ_HANDLER -extern void (*handle_arch_irq)(struct pt_regs *); -extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); -#endif - /* * This is for easy migration, but should be changed in the source */ @@ -35,35 +30,4 @@ do { \ raw_spin_unlock(&desc->lock); \ } while(0) -#ifndef __ASSEMBLY__ -/* - * Entry/exit functions for chained handlers where the primary IRQ chip - * may implement either fasteoi or level-trigger flow control. - */ -static inline void chained_irq_enter(struct irq_chip *chip, - struct irq_desc *desc) -{ - /* FastEOI controllers require no action on entry. */ - if (chip->irq_eoi) - return; - - if (chip->irq_mask_ack) { - chip->irq_mask_ack(&desc->irq_data); - } else { - chip->irq_mask(&desc->irq_data); - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - } -} - -static inline void chained_irq_exit(struct irq_chip *chip, - struct irq_desc *desc) -{ - if (chip->irq_eoi) - chip->irq_eoi(&desc->irq_data); - else - chip->irq_unmask(&desc->irq_data); -} -#endif - #endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 5cf2e979b4be..7d2c3c843801 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -30,6 +30,11 @@ struct hw_pci { void (*postinit)(void); u8 (*swizzle)(struct pci_dev *dev, u8 *pin); int (*map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); + resource_size_t (*align_resource)(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align); }; /* @@ -51,6 +56,12 @@ struct pci_sys_data { u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ int (*map_irq)(const struct pci_dev *, u8, u8); + /* Resource alignement requirements */ + resource_size_t (*align_resource)(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align); void *private_data; /* platform controller private data */ }; diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h new file mode 100644 index 000000000000..0f7b7620e9a5 --- /dev/null +++ b/arch/arm/include/asm/mcpm.h @@ -0,0 +1,209 @@ +/* + * arch/arm/include/asm/mcpm.h + * + * Created by: Nicolas Pitre, April 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MCPM_H +#define MCPM_H + +/* + * Maximum number of possible clusters / CPUs per cluster. + * + * This should be sufficient for quite a while, while keeping the + * (assembly) code simpler. When this starts to grow then we'll have + * to consider dynamic allocation. + */ +#define MAX_CPUS_PER_CLUSTER 4 +#define MAX_NR_CLUSTERS 2 + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <asm/cacheflush.h> + +/* + * Platform specific code should use this symbol to set up secondary + * entry location for processors to use when released from reset. + */ +extern void mcpm_entry_point(void); + +/* + * This is used to indicate where the given CPU from given cluster should + * branch once it is ready to re-enter the kernel using ptr, or NULL if it + * should be gated. A gated CPU is held in a WFE loop until its vector + * becomes non NULL. + */ +void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr); + +/* + * CPU/cluster power operations API for higher subsystems to use. + */ + +/** + * mcpm_cpu_power_up - make given CPU in given cluster runable + * + * @cpu: CPU number within given cluster + * @cluster: cluster number for the CPU + * + * The identified CPU is brought out of reset. If the cluster was powered + * down then it is brought up as well, taking care not to let the other CPUs + * in the cluster run, and ensuring appropriate cluster setup. + * + * Caller must ensure the appropriate entry vector is initialized with + * mcpm_set_entry_vector() prior to calling this. + * + * This must be called in a sleepable context. However, the implementation + * is strongly encouraged to return early and let the operation happen + * asynchronously, especially when significant delays are expected. + * + * If the operation cannot be performed then an error code is returned. + */ +int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster); + +/** + * mcpm_cpu_power_down - power the calling CPU down + * + * The calling CPU is powered down. + * + * If this CPU is found to be the "last man standing" in the cluster + * then the cluster is prepared for power-down too. + * + * This must be called with interrupts disabled. + * + * This does not return. Re-entry in the kernel is expected via + * mcpm_entry_point. + */ +void mcpm_cpu_power_down(void); + +/** + * mcpm_cpu_suspend - bring the calling CPU in a suspended state + * + * @expected_residency: duration in microseconds the CPU is expected + * to remain suspended, or 0 if unknown/infinity. + * + * The calling CPU is suspended. The expected residency argument is used + * as a hint by the platform specific backend to implement the appropriate + * sleep state level according to the knowledge it has on wake-up latency + * for the given hardware. + * + * If this CPU is found to be the "last man standing" in the cluster + * then the cluster may be prepared for power-down too, if the expected + * residency makes it worthwhile. + * + * This must be called with interrupts disabled. + * + * This does not return. Re-entry in the kernel is expected via + * mcpm_entry_point. + */ +void mcpm_cpu_suspend(u64 expected_residency); + +/** + * mcpm_cpu_powered_up - housekeeping workafter a CPU has been powered up + * + * This lets the platform specific backend code perform needed housekeeping + * work. This must be called by the newly activated CPU as soon as it is + * fully operational in kernel space, before it enables interrupts. + * + * If the operation cannot be performed then an error code is returned. + */ +int mcpm_cpu_powered_up(void); + +/* + * Platform specific methods used in the implementation of the above API. + */ +struct mcpm_platform_ops { + int (*power_up)(unsigned int cpu, unsigned int cluster); + void (*power_down)(void); + void (*suspend)(u64); + void (*powered_up)(void); +}; + +/** + * mcpm_platform_register - register platform specific power methods + * + * @ops: mcpm_platform_ops structure to register + * + * An error is returned if the registration has been done previously. + */ +int __init mcpm_platform_register(const struct mcpm_platform_ops *ops); + +/* Synchronisation structures for coordinating safe cluster setup/teardown: */ + +/* + * When modifying this structure, make sure you update the MCPM_SYNC_ defines + * to match. + */ +struct mcpm_sync_struct { + /* individual CPU states */ + struct { + s8 cpu __aligned(__CACHE_WRITEBACK_GRANULE); + } cpus[MAX_CPUS_PER_CLUSTER]; + + /* cluster state */ + s8 cluster __aligned(__CACHE_WRITEBACK_GRANULE); + + /* inbound-side state */ + s8 inbound __aligned(__CACHE_WRITEBACK_GRANULE); +}; + +struct sync_struct { + struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS]; +}; + +extern unsigned long sync_phys; /* physical address of *mcpm_sync */ + +void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster); +void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster); +void __mcpm_outbound_leave_critical(unsigned int cluster, int state); +bool __mcpm_outbound_enter_critical(unsigned int this_cpu, unsigned int cluster); +int __mcpm_cluster_state(unsigned int cluster); + +int __init mcpm_sync_init( + void (*power_up_setup)(unsigned int affinity_level)); + +void __init mcpm_smp_set_ops(void); + +#else + +/* + * asm-offsets.h causes trouble when included in .c files, and cacheflush.h + * cannot be included in asm files. Let's work around the conflict like this. + */ +#include <asm/asm-offsets.h> +#define __CACHE_WRITEBACK_GRANULE CACHE_WRITEBACK_GRANULE + +#endif /* ! __ASSEMBLY__ */ + +/* Definitions for mcpm_sync_struct */ +#define CPU_DOWN 0x11 +#define CPU_COMING_UP 0x12 +#define CPU_UP 0x13 +#define CPU_GOING_DOWN 0x14 + +#define CLUSTER_DOWN 0x21 +#define CLUSTER_UP 0x22 +#define CLUSTER_GOING_DOWN 0x23 + +#define INBOUND_NOT_COMING_UP 0x31 +#define INBOUND_COMING_UP 0x32 + +/* + * Offsets for the mcpm_sync_struct members, for use in asm. + * We don't want to make them global to the kernel via asm-offsets.c. + */ +#define MCPM_SYNC_CLUSTER_CPUS 0 +#define MCPM_SYNC_CPU_SIZE __CACHE_WRITEBACK_GRANULE +#define MCPM_SYNC_CLUSTER_CLUSTER \ + (MCPM_SYNC_CLUSTER_CPUS + MCPM_SYNC_CPU_SIZE * MAX_CPUS_PER_CLUSTER) +#define MCPM_SYNC_CLUSTER_INBOUND \ + (MCPM_SYNC_CLUSTER_CLUSTER + __CACHE_WRITEBACK_GRANULE) +#define MCPM_SYNC_CLUSTER_SIZE \ + (MCPM_SYNC_CLUSTER_INBOUND + __CACHE_WRITEBACK_GRANULE) + +#endif diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 863a6611323c..a7b85e0d0cc1 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -27,6 +27,8 @@ void __check_vmalloc_seq(struct mm_struct *mm); void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); #define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; }) +DECLARE_PER_CPU(atomic64_t, active_asids); + #else /* !CONFIG_CPU_HAS_ASID */ #ifdef CONFIG_MMU diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 6ef8afd1b64c..86b8fe398b95 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -111,7 +111,7 @@ #define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */ #define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */ #define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ -#define L_PTE_S2_RDWR (_AT(pteval_t, 2) << 6) /* HAP[2:1] */ +#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ /* * Hyp-mode PL2 PTE definitions for LPAE. diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 80d6fc4dbe4a..9bcd262a9008 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -61,6 +61,15 @@ extern void __pgd_error(const char *file, int line, pgd_t); #define FIRST_USER_ADDRESS PAGE_SIZE /* + * Use TASK_SIZE as the ceiling argument for free_pgtables() and + * free_pgd_range() to avoid freeing the modules pmd when LPAE is enabled (pmd + * page shared between user and kernel). + */ +#ifdef CONFIG_ARM_LPAE +#define USER_PGTABLES_CEILING TASK_SIZE +#endif + +/* * The pgprot_* and protection_map entries will be fixed up in runtime * to include the cachable and bufferable bits based on memory policy, * as well as any architecture dependent bits like global/ASID and SMP diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h index 5a85f148b607..21a23e378bbe 100644 --- a/arch/arm/include/asm/system_misc.h +++ b/arch/arm/include/asm/system_misc.h @@ -21,9 +21,6 @@ extern void (*arm_pm_idle)(void); extern unsigned int user_debug; -extern void disable_hlt(void); -extern void enable_hlt(void); - #endif /* !__ASSEMBLY__ */ #endif /* __ASM_ARM_SYSTEM_MISC_H */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index cddda1f41f0f..1995d1a84060 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -152,6 +152,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_SYSCALL_AUDIT 9 #define TIF_SYSCALL_TRACEPOINT 10 #define TIF_SECCOMP 11 /* seccomp syscall filtering active */ +#define TIF_NOHZ 12 /* in adaptive nohz mode */ #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 4db8c8820f0d..a3625d141c1d 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -14,7 +14,6 @@ #include <asm/glue.h> -#define TLB_V3_PAGE (1 << 0) #define TLB_V4_U_PAGE (1 << 1) #define TLB_V4_D_PAGE (1 << 2) #define TLB_V4_I_PAGE (1 << 3) @@ -22,7 +21,6 @@ #define TLB_V6_D_PAGE (1 << 5) #define TLB_V6_I_PAGE (1 << 6) -#define TLB_V3_FULL (1 << 8) #define TLB_V4_U_FULL (1 << 9) #define TLB_V4_D_FULL (1 << 10) #define TLB_V4_I_FULL (1 << 11) @@ -52,7 +50,6 @@ * ============= * * We have the following to choose from: - * v3 - ARMv3 * v4 - ARMv4 without write buffer * v4wb - ARMv4 with write buffer without I TLB flush entry instruction * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction @@ -169,7 +166,7 @@ # define v6wbi_always_flags (-1UL) #endif -#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ +#define v7wbi_tlb_flags_smp (TLB_WB | TLB_BARRIER | \ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | \ TLB_V7_UIS_ASID | TLB_V7_UIS_BP) #define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ @@ -330,7 +327,6 @@ static inline void local_flush_tlb_all(void) if (tlb_flag(TLB_WB)) dsb(); - tlb_op(TLB_V3_FULL, "c6, c0, 0", zero); tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero); tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero); tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero); @@ -351,9 +347,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_WB)) dsb(); - if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) { + if (possible_tlb_flags & (TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) { if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { - tlb_op(TLB_V3_FULL, "c6, c0, 0", zero); tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero); tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero); tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero); @@ -385,9 +380,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) if (tlb_flag(TLB_WB)) dsb(); - if (possible_tlb_flags & (TLB_V3_PAGE|TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) && + if (possible_tlb_flags & (TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) && cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { - tlb_op(TLB_V3_PAGE, "c6, c0, 0", uaddr); tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr); tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", uaddr); tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", uaddr); @@ -418,7 +412,6 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) if (tlb_flag(TLB_WB)) dsb(); - tlb_op(TLB_V3_PAGE, "c6, c0, 0", kaddr); tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr); tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr); tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr); @@ -450,6 +443,21 @@ static inline void local_flush_bp_all(void) isb(); } +#ifdef CONFIG_ARM_ERRATA_798181 +static inline void dummy_flush_tlb_a15_erratum(void) +{ + /* + * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0. + */ + asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0)); + dsb(); +} +#else +static inline void dummy_flush_tlb_a15_erratum(void) +{ +} +#endif + /* * flush_pmd_entry * diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index e4ddfb39ca34..141baa3f9a72 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -44,14 +44,6 @@ #define __ARCH_WANT_SYS_CLONE /* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -/* * Unimplemented (or alternatively implemented) syscalls */ #define __IGNORE_fadvise64_64 diff --git a/arch/arm/mach-bcm2835/include/mach/debug-macro.S b/arch/arm/include/debug/bcm2835.S index 8a161e44ae28..aed9199bd847 100644 --- a/arch/arm/mach-bcm2835/include/mach/debug-macro.S +++ b/arch/arm/include/debug/bcm2835.S @@ -11,7 +11,8 @@ * */ -#include <mach/bcm2835_soc.h> +#define BCM2835_DEBUG_PHYS 0x20201000 +#define BCM2835_DEBUG_VIRT 0xf0201000 .macro addruart, rp, rv, tmp ldr \rp, =BCM2835_DEBUG_PHYS diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/include/debug/cns3xxx.S index d04c150baa1c..d04c150baa1c 100644 --- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S +++ b/arch/arm/include/debug/cns3xxx.S diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/include/debug/mxs.S index 90c6b7836ad3..d86951551ca1 100644 --- a/arch/arm/mach-mxs/include/mach/debug-macro.S +++ b/arch/arm/include/debug/mxs.S @@ -11,16 +11,13 @@ * */ -#include <mach/mx23.h> -#include <mach/mx28.h> - #ifdef CONFIG_DEBUG_IMX23_UART -#define UART_PADDR MX23_DUART_BASE_ADDR +#define UART_PADDR 0x80070000 #elif defined (CONFIG_DEBUG_IMX28_UART) -#define UART_PADDR MX28_DUART_BASE_ADDR +#define UART_PADDR 0x80074000 #endif -#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) +#define UART_VADDR 0xfe100000 .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/include/debug/nomadik.S index 735417922ce2..735417922ce2 100644 --- a/arch/arm/mach-nomadik/include/mach/debug-macro.S +++ b/arch/arm/include/debug/nomadik.S diff --git a/arch/arm/mach-prima2/include/mach/uart.h b/arch/arm/include/debug/sirf.S index c10510d01a44..dbf250cf18e6 100644 --- a/arch/arm/mach-prima2/include/mach/uart.h +++ b/arch/arm/include/debug/sirf.S @@ -1,15 +1,11 @@ /* - * arch/arm/mach-prima2/include/mach/uart.h + * arch/arm/mach-prima2/include/mach/debug-macro.S * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. * * Licensed under GPLv2 or later. */ -#ifndef __MACH_PRIMA2_SIRFSOC_UART_H -#define __MACH_PRIMA2_SIRFSOC_UART_H - -/* UART-1: used as serial debug port */ #if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1) #define SIRFSOC_UART1_PA_BASE 0xb0060000 #elif defined(CONFIG_DEBUG_SIRFMARCO_UART1) @@ -17,8 +13,8 @@ #else #define SIRFSOC_UART1_PA_BASE 0 #endif -#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000) -#define SIRFSOC_UART1_SIZE SZ_4K + +#define SIRFSOC_UART1_VA_BASE 0xFEC60000 #define SIRFSOC_UART_TXFIFO_STATUS 0x0114 #define SIRFSOC_UART_TXFIFO_DATA 0x0118 @@ -26,4 +22,21 @@ #define SIRFSOC_UART1_TXFIFO_FULL (1 << 5) #define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6) -#endif + .macro addruart, rp, rv, tmp + ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical + ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA] + .endm + + .macro busyuart,rd,rx + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS] + tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY + beq 1001b + .endm + diff --git a/arch/arm/include/debug/uncompress.h b/arch/arm/include/debug/uncompress.h new file mode 100644 index 000000000000..0e2949b0fae9 --- /dev/null +++ b/arch/arm/include/debug/uncompress.h @@ -0,0 +1,7 @@ +#ifdef CONFIG_DEBUG_UNCOMPRESS +extern void putc(int c); +#else +static inline void putc(int c) {} +#endif +static inline void flush(void) {} +static inline void arch_decomp_setup(void) {} diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S new file mode 100644 index 000000000000..2848857f5b62 --- /dev/null +++ b/arch/arm/include/debug/ux500.S @@ -0,0 +1,48 @@ +/* + * Debugging macro include header + * + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + +#if CONFIG_UX500_DEBUG_UART > 2 +#error Invalid Ux500 debug UART +#endif + +/* + * DEBUG_LL only works if only one SOC is built in. We don't use #else below + * in order to get "__UX500_UART redefined" warnings if more than one SOC is + * built, so that there's some hint during the build that something is wrong. + */ + +#ifdef CONFIG_UX500_SOC_DB8500 +#define U8500_UART0_PHYS_BASE (0x80120000) +#define U8500_UART1_PHYS_BASE (0x80121000) +#define U8500_UART2_PHYS_BASE (0x80007000) +#define U8500_UART0_VIRT_BASE (0xa8120000) +#define U8500_UART1_VIRT_BASE (0xa8121000) +#define U8500_UART2_VIRT_BASE (0xa8007000) +#define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE +#define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE +#endif + +#if !defined(__UX500_PHYS_UART) || !defined(__UX500_VIRT_UART) +#error Unknown SOC +#endif + +#define UX500_PHYS_UART(n) __UX500_PHYS_UART(n) +#define UX500_VIRT_UART(n) __UX500_VIRT_UART(n) +#define UART_PHYS_BASE UX500_PHYS_UART(CONFIG_UX500_DEBUG_UART) +#define UART_VIRT_BASE UX500_VIRT_UART(CONFIG_UX500_DEBUG_UART) + + .macro addruart, rp, rv, tmp + ldr \rp, =UART_PHYS_BASE @ no, physical address + ldr \rv, =UART_VIRT_BASE @ yes, virtual address + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 023bfeb367bf..c1ee007523d7 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -53,12 +53,12 @@ #define KVM_ARM_FIQ_spsr fiq_regs[7] struct kvm_regs { - struct pt_regs usr_regs;/* R0_usr - R14_usr, PC, CPSR */ - __u32 svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */ - __u32 abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */ - __u32 und_regs[3]; /* SP_und, LR_und, SPSR_und */ - __u32 irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */ - __u32 fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */ + struct pt_regs usr_regs; /* R0_usr - R14_usr, PC, CPSR */ + unsigned long svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */ + unsigned long abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */ + unsigned long und_regs[3]; /* SP_und, LR_und, SPSR_und */ + unsigned long irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */ + unsigned long fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */ }; /* Supported Processor Types */ diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 923eec7105cf..a53efa993690 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -149,6 +149,10 @@ int main(void) DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL); DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE); DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE); + BLANK(); + DEFINE(CACHE_WRITEBACK_ORDER, __CACHE_WRITEBACK_ORDER); + DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE); + BLANK(); #ifdef CONFIG_KVM_ARM_HOST DEFINE(VCPU_KVM, offsetof(struct kvm_vcpu, kvm)); DEFINE(VCPU_MIDR, offsetof(struct kvm_vcpu, arch.midr)); @@ -165,10 +169,10 @@ int main(void) DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc)); DEFINE(VCPU_CPSR, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr)); DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines)); - DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.hsr)); - DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.hxfar)); - DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.hpfar)); - DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.hyp_pc)); + DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.fault.hsr)); + DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.fault.hxfar)); + DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.fault.hpfar)); + DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.fault.hyp_pc)); #ifdef CONFIG_KVM_ARM_VGIC DEFINE(VCPU_VGIC_CPU, offsetof(struct kvm_vcpu, arch.vgic_cpu)); DEFINE(VGIC_CPU_HCR, offsetof(struct vgic_cpu, vgic_hcr)); diff --git a/arch/arm/kernel/atags_proc.c b/arch/arm/kernel/atags_proc.c index 42a1a1415fa6..c7ff8073416f 100644 --- a/arch/arm/kernel/atags_proc.c +++ b/arch/arm/kernel/atags_proc.c @@ -9,24 +9,18 @@ struct buffer { char data[]; }; -static int -read_buffer(char* page, char** start, off_t off, int count, - int* eof, void* data) +static ssize_t atags_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) { - struct buffer *buffer = (struct buffer *)data; - - if (off >= buffer->size) { - *eof = 1; - return 0; - } - - count = min((int) (buffer->size - off), count); - - memcpy(page, &buffer->data[off], count); - - return count; + struct buffer *b = PDE_DATA(file_inode(file)); + return simple_read_from_buffer(buf, count, ppos, b->data, b->size); } +static const struct file_operations atags_fops = { + .read = atags_read, + .llseek = default_llseek, +}; + #define BOOT_PARAMS_SIZE 1536 static char __initdata atags_copy[BOOT_PARAMS_SIZE]; @@ -66,9 +60,7 @@ static int __init init_atags_procfs(void) b->size = size; memcpy(b->data, atags_copy, size); - tags_entry = create_proc_read_entry("atags", 0400, - NULL, read_buffer, b); - + tags_entry = proc_create_data("atags", 0400, NULL, &atags_fops, b); if (!tags_entry) goto nomem; diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index a1f73b502ef0..b2ed73c45489 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -462,6 +462,7 @@ static void pcibios_init_hw(struct hw_pci *hw, struct list_head *head) sys->busnr = busnr; sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; + sys->align_resource = hw->align_resource; INIT_LIST_HEAD(&sys->resources); if (hw->private_data) @@ -574,6 +575,8 @@ char * __init pcibios_setup(char *str) resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { + struct pci_dev *dev = data; + struct pci_sys_data *sys = dev->sysdata; resource_size_t start = res->start; if (res->flags & IORESOURCE_IO && start & 0x300) @@ -581,6 +584,9 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, start = (start + align - 1) & ~(align - 1); + if (sys->align_resource) + return sys->align_resource(dev, res, start, size, align); + return start; } diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c index 85aa2b292692..43076536965c 100644 --- a/arch/arm/kernel/early_printk.c +++ b/arch/arm/kernel/early_printk.c @@ -29,28 +29,17 @@ static void early_console_write(struct console *con, const char *s, unsigned n) early_write(s, n); } -static struct console early_console = { +static struct console early_console_dev = { .name = "earlycon", .write = early_console_write, .flags = CON_PRINTBUFFER | CON_BOOT, .index = -1, }; -asmlinkage void early_printk(const char *fmt, ...) -{ - char buf[512]; - int n; - va_list ap; - - va_start(ap, fmt); - n = vscnprintf(buf, sizeof(buf), fmt, ap); - early_write(buf, n); - va_end(ap); -} - static int __init setup_early_printk(char *buf) { - register_console(&early_console); + early_console = &early_console_dev; + register_console(&early_console_dev); return 0; } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index cd22d821bf74..582b405befc5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -192,18 +192,6 @@ __dabt_svc: svc_entry mov r2, sp dabt_helper - - @ - @ IRQs off again before pulling preserved data off the stack - @ - disable_irq_notrace - -#ifdef CONFIG_TRACE_IRQFLAGS - tst r5, #PSR_I_BIT - bleq trace_hardirqs_on - tst r5, #PSR_I_BIT - blne trace_hardirqs_off -#endif svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__dabt_svc) @@ -223,12 +211,7 @@ __irq_svc: blne svc_preempt #endif -#ifdef CONFIG_TRACE_IRQFLAGS - @ The parent context IRQs must have been enabled to get here in - @ the first place, so there's no point checking the PSR I bit. - bl trace_hardirqs_on -#endif - svc_exit r5 @ return from exception + svc_exit r5, irq = 1 @ return from exception UNWIND(.fnend ) ENDPROC(__irq_svc) @@ -295,22 +278,8 @@ __und_svc_fault: mov r0, sp @ struct pt_regs *regs bl __und_fault - @ - @ IRQs off again before pulling preserved data off the stack - @ __und_svc_finish: - disable_irq_notrace - - @ - @ restore SPSR and restart the instruction - @ ldr r5, [sp, #S_PSR] @ Get SVC cpsr -#ifdef CONFIG_TRACE_IRQFLAGS - tst r5, #PSR_I_BIT - bleq trace_hardirqs_on - tst r5, #PSR_I_BIT - blne trace_hardirqs_off -#endif svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__und_svc) @@ -320,18 +289,6 @@ __pabt_svc: svc_entry mov r2, sp @ regs pabt_helper - - @ - @ IRQs off again before pulling preserved data off the stack - @ - disable_irq_notrace - -#ifdef CONFIG_TRACE_IRQFLAGS - tst r5, #PSR_I_BIT - bleq trace_hardirqs_on - tst r5, #PSR_I_BIT - blne trace_hardirqs_off -#endif svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__pabt_svc) @@ -396,6 +353,7 @@ ENDPROC(__pabt_svc) #ifdef CONFIG_IRQSOFF_TRACER bl trace_hardirqs_off #endif + ct_user_exit save = 0 .endm .macro kuser_cmpxchg_check diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 3248cde504ed..bc5bc0a97131 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -35,12 +35,11 @@ ret_fast_syscall: ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK bne fast_work_pending -#if defined(CONFIG_IRQSOFF_TRACER) asm_trace_hardirqs_on -#endif /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr + ct_user_enter restore_user_regs fast = 1, offset = S_OFF UNWIND(.fnend ) @@ -71,11 +70,11 @@ ENTRY(ret_to_user_from_irq) tst r1, #_TIF_WORK_MASK bne work_pending no_work_pending: -#if defined(CONFIG_IRQSOFF_TRACER) asm_trace_hardirqs_on -#endif + /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr + ct_user_enter save = 0 restore_user_regs fast = 0, offset = 0 ENDPROC(ret_to_user_from_irq) @@ -276,7 +275,13 @@ ENDPROC(ftrace_graph_caller_old) */ .macro mcount_enter +/* + * This pad compensates for the push {lr} at the call site. Note that we are + * unable to unwind through a function which does not otherwise save its lr. + */ + UNWIND(.pad #4) stmdb sp!, {r0-r3, lr} + UNWIND(.save {r0-r3, lr}) .endm .macro mcount_get_lr reg @@ -289,6 +294,7 @@ ENDPROC(ftrace_graph_caller_old) .endm ENTRY(__gnu_mcount_nc) +UNWIND(.fnstart) #ifdef CONFIG_DYNAMIC_FTRACE mov ip, lr ldmia sp!, {lr} @@ -296,17 +302,22 @@ ENTRY(__gnu_mcount_nc) #else __mcount #endif +UNWIND(.fnend) ENDPROC(__gnu_mcount_nc) #ifdef CONFIG_DYNAMIC_FTRACE ENTRY(ftrace_caller) +UNWIND(.fnstart) __ftrace_caller +UNWIND(.fnend) ENDPROC(ftrace_caller) #endif #ifdef CONFIG_FUNCTION_GRAPH_TRACER ENTRY(ftrace_graph_caller) +UNWIND(.fnstart) __ftrace_graph_caller +UNWIND(.fnend) ENDPROC(ftrace_graph_caller) #endif @@ -394,6 +405,7 @@ ENTRY(vector_swi) mcr p15, 0, ip, c1, c0 @ update control register #endif enable_irq + ct_user_exit get_thread_info tsk adr tbl, sys_call_table @ load syscall table pointer diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 9a8531eadd3d..160f3376ba6d 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -74,7 +74,24 @@ .endm #ifndef CONFIG_THUMB2_KERNEL - .macro svc_exit, rpsr + .macro svc_exit, rpsr, irq = 0 + .if \irq != 0 + @ IRQs already off +#ifdef CONFIG_TRACE_IRQFLAGS + @ The parent context IRQs must have been enabled to get here in + @ the first place, so there's no point checking the PSR I bit. + bl trace_hardirqs_on +#endif + .else + @ IRQs off again before pulling preserved data off the stack + disable_irq_notrace +#ifdef CONFIG_TRACE_IRQFLAGS + tst \rpsr, #PSR_I_BIT + bleq trace_hardirqs_on + tst \rpsr, #PSR_I_BIT + blne trace_hardirqs_off +#endif + .endif msr spsr_cxsf, \rpsr #if defined(CONFIG_CPU_V6) ldr r0, [sp] @@ -120,7 +137,24 @@ mov pc, \reg .endm #else /* CONFIG_THUMB2_KERNEL */ - .macro svc_exit, rpsr + .macro svc_exit, rpsr, irq = 0 + .if \irq != 0 + @ IRQs already off +#ifdef CONFIG_TRACE_IRQFLAGS + @ The parent context IRQs must have been enabled to get here in + @ the first place, so there's no point checking the PSR I bit. + bl trace_hardirqs_on +#endif + .else + @ IRQs off again before pulling preserved data off the stack + disable_irq_notrace +#ifdef CONFIG_TRACE_IRQFLAGS + tst \rpsr, #PSR_I_BIT + bleq trace_hardirqs_on + tst \rpsr, #PSR_I_BIT + blne trace_hardirqs_off +#endif + .endif ldr lr, [sp, #S_SP] @ top of the stack ldrd r0, r1, [sp, #S_LR] @ calling lr and pc clrex @ clear the exclusive monitor @@ -164,6 +198,34 @@ #endif /* !CONFIG_THUMB2_KERNEL */ /* + * Context tracking subsystem. Used to instrument transitions + * between user and kernel mode. + */ + .macro ct_user_exit, save = 1 +#ifdef CONFIG_CONTEXT_TRACKING + .if \save + stmdb sp!, {r0-r3, ip, lr} + bl user_exit + ldmia sp!, {r0-r3, ip, lr} + .else + bl user_exit + .endif +#endif + .endm + + .macro ct_user_enter, save = 1 +#ifdef CONFIG_CONTEXT_TRACKING + .if \save + stmdb sp!, {r0-r3, ip, lr} + bl user_enter + ldmia sp!, {r0-r3, ip, lr} + .else + bl user_enter + .endif +#endif + .endm + +/* * These are the registers used in the syscall handler, and allow us to * have in theory up to 7 arguments to a function - r0 to r6. * diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 9b6de8c988f3..8ff0ecdc637f 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -254,7 +254,7 @@ static void sysrq_etm_dump(int key) static struct sysrq_key_op sysrq_etm_op = { .handler = sysrq_etm_dump, - .help_msg = "ETM buffer dump", + .help_msg = "etm-buffer-dump(v)", .action_msg = "etm", }; diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 854bd22380d3..5b391a689b47 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -98,8 +98,9 @@ __mmap_switched: str r9, [r4] @ Save processor ID str r1, [r5] @ Save machine type str r2, [r6] @ Save atags pointer - bic r4, r0, #CR_A @ Clear 'A' bit - stmia r7, {r0, r4} @ Save control register values + cmp r7, #0 + bicne r4, r0, #CR_A @ Clear 'A' bit + stmneia r7, {r0, r4} @ Save control register values b start_kernel ENDPROC(__mmap_switched) @@ -113,7 +114,11 @@ __mmap_switched_data: .long processor_id @ r4 .long __machine_arch_type @ r5 .long __atags_pointer @ r6 +#ifdef CONFIG_CPU_CP15 .long cr_alignment @ r7 +#else + .long 0 @ r7 +#endif .long init_thread_union + THREAD_START_SP @ sp .size __mmap_switched_data, . - __mmap_switched_data diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 2c228a07e58c..6a2e09c952c7 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -32,15 +32,21 @@ * numbers for r1. * */ - .arm __HEAD + +#ifdef CONFIG_CPU_THUMBONLY + .thumb +ENTRY(stext) +#else + .arm ENTRY(stext) THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. THUMB( bx r9 ) @ If this is a Thumb-2 kernel, THUMB( .thumb ) @ switch to Thumb now. THUMB(1: ) +#endif setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index e0eb9a1cae77..8bac553fe213 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -267,7 +267,7 @@ __create_page_tables: addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] -#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8) +#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8) sub r4, r4, #4 @ Fixup page table pointer @ for 64-bit descriptors #endif diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 96093b75ab90..1fd749ee4a1b 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -966,7 +966,7 @@ static void reset_ctrl_regs(void *unused) } if (err) { - pr_warning("CPU %d debug is powered down!\n", cpu); + pr_warn_once("CPU %d debug is powered down!\n", cpu); cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); return; } @@ -987,7 +987,7 @@ clear_vcr: isb(); if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { - pr_warning("CPU %d failed to disable vector catch\n", cpu); + pr_warn_once("CPU %d failed to disable vector catch\n", cpu); return; } @@ -1007,7 +1007,7 @@ clear_vcr: } if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { - pr_warning("CPU %d failed to clear debug register pairs\n", cpu); + pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu); return; } @@ -1043,7 +1043,7 @@ static int dbg_cpu_pm_notify(struct notifier_block *self, unsigned long action, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata dbg_cpu_pm_nb = { +static struct notifier_block dbg_cpu_pm_nb = { .notifier_call = dbg_cpu_pm_notify, }; diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 8e4ef4c83a74..9723d17b8f38 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -26,6 +26,7 @@ #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/random.h> #include <linux/smp.h> #include <linux/init.h> @@ -114,7 +115,10 @@ EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { - machine_desc->init_irq(); + if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq) + irqchip_init(); + else + machine_desc->init_irq(); } #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 146157dfe27c..8c3094d0f7b7 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -253,7 +253,10 @@ validate_event(struct pmu_hw_events *hw_events, struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct pmu *leader_pmu = event->group_leader->pmu; - if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF) + if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF) + return 1; + + if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec) return 1; return armpmu->get_event_idx(hw_events, event) >= 0; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index cbd0f51937cc..f21970316836 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -57,38 +57,6 @@ static const char *isa_modes[] = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -static volatile int hlt_counter; - -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; - BUG_ON(hlt_counter < 0); -} - -EXPORT_SYMBOL(enable_hlt); - -static int __init nohlt_setup(char *__unused) -{ - hlt_counter = 1; - return 1; -} - -static int __init hlt_setup(char *__unused) -{ - hlt_counter = 0; - return 1; -} - -__setup("nohlt", nohlt_setup); -__setup("hlt", hlt_setup); - extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); typedef void (*phys_reset_t)(unsigned long); @@ -172,54 +140,38 @@ static void default_idle(void) local_irq_enable(); } -/* - * The idle thread. - * We always respect 'hlt_counter' to prevent low power idle. - */ -void cpu_idle(void) +void arch_cpu_idle_prepare(void) { local_fiq_enable(); +} - /* endless idle loop with no priority at all */ - while (1) { - tick_nohz_idle_enter(); - rcu_idle_enter(); - ledtrig_cpu(CPU_LED_IDLE_START); - while (!need_resched()) { -#ifdef CONFIG_HOTPLUG_CPU - if (cpu_is_offline(smp_processor_id())) - cpu_die(); +void arch_cpu_idle_enter(void) +{ + ledtrig_cpu(CPU_LED_IDLE_START); +#ifdef CONFIG_PL310_ERRATA_769419 + wmb(); #endif +} - /* - * We need to disable interrupts here - * to ensure we don't miss a wakeup call. - */ - local_irq_disable(); -#ifdef CONFIG_PL310_ERRATA_769419 - wmb(); +void arch_cpu_idle_exit(void) +{ + ledtrig_cpu(CPU_LED_IDLE_END); +} + +#ifdef CONFIG_HOTPLUG_CPU +void arch_cpu_idle_dead(void) +{ + cpu_die(); +} #endif - if (hlt_counter) { - local_irq_enable(); - cpu_relax(); - } else if (!need_resched()) { - stop_critical_timings(); - if (cpuidle_idle_call()) - default_idle(); - start_critical_timings(); - /* - * default_idle functions must always - * return with IRQs enabled. - */ - WARN_ON(irqs_disabled()); - } else - local_irq_enable(); - } - ledtrig_cpu(CPU_LED_IDLE_END); - rcu_idle_exit(); - tick_nohz_idle_exit(); - schedule_preempt_disabled(); - } + +/* + * Called from the core idle loop. + */ +void arch_cpu_idle(void) +{ + if (cpuidle_idle_call()) + default_idle(); } static char reboot_mode = 'h'; @@ -273,11 +225,8 @@ void __show_regs(struct pt_regs *regs) unsigned long flags; char buf[64]; - printk("CPU: %d %s (%s %.*s)\n", - raw_smp_processor_id(), print_tainted(), - init_utsname()->release, - (int)strcspn(init_utsname()->version, " "), - init_utsname()->version); + show_regs_print_info(KERN_DEFAULT); + print_symbol("PC is at %s\n", instruction_pointer(regs)); print_symbol("LR is at %s\n", regs->ARM_lr); printk("pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n" @@ -332,7 +281,6 @@ void __show_regs(struct pt_regs *regs) void show_regs(struct pt_regs * regs) { printk("\n"); - printk("Pid: %d, comm: %20s\n", task_pid_nr(current), current->comm); __show_regs(regs); dump_stack(); } diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index 8085417555dd..fafedd86885d 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c @@ -26,7 +26,7 @@ static int save_return_addr(struct stackframe *frame, void *d) struct return_address_data *data = d; if (!data->level) { - data->addr = (void *)frame->lr; + data->addr = (void *)frame->pc; return 1; } else { @@ -41,7 +41,8 @@ void *return_address(unsigned int level) struct stackframe frame; register unsigned long current_sp asm ("sp"); - data.level = level + 1; + data.level = level + 2; + data.addr = NULL; frame.fp = (unsigned long)__builtin_frame_address(0); frame.sp = current_sp; diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index bd6f56b9ec21..59d2adb764a9 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -45,12 +45,12 @@ static u32 notrace jiffy_sched_clock_read(void) static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read; -static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) +static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift) { return (cyc * mult) >> shift; } -static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) +static unsigned long long notrace cyc_to_sched_clock(u32 cyc, u32 mask) { u64 epoch_ns; u32 epoch_cyc; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 3f6cbb2e3eda..728007c4a2b7 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -56,7 +56,6 @@ #include <asm/virt.h> #include "atags.h" -#include "tcm.h" #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE) @@ -291,10 +290,10 @@ static int cpu_has_aliasing_icache(unsigned int arch) static void __init cacheid_init(void) { - unsigned int cachetype = read_cpuid_cachetype(); unsigned int arch = cpu_architecture(); if (arch >= CPU_ARCH_ARMv6) { + unsigned int cachetype = read_cpuid_cachetype(); if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ arch = CPU_ARCH_ARMv7; @@ -353,6 +352,23 @@ void __init early_print(const char *str, ...) printk("%s", buf); } +static void __init cpuid_init_hwcaps(void) +{ + unsigned int divide_instrs; + + if (cpu_architecture() < CPU_ARCH_ARMv7) + return; + + divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24; + + switch (divide_instrs) { + case 2: + elf_hwcap |= HWCAP_IDIVA; + case 1: + elf_hwcap |= HWCAP_IDIVT; + } +} + static void __init feat_v6_fixup(void) { int id = read_cpuid_id(); @@ -373,7 +389,7 @@ static void __init feat_v6_fixup(void) * * cpu_init sets up the per-CPU stacks. */ -void cpu_init(void) +void notrace cpu_init(void) { unsigned int cpu = smp_processor_id(); struct stack *stk = &stacks[cpu]; @@ -483,8 +499,11 @@ static void __init setup_processor(void) snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c", list->elf_name, ENDIANNESS); elf_hwcap = list->elf_hwcap; + + cpuid_init_hwcaps(); + #ifndef CONFIG_ARM_THUMB - elf_hwcap &= ~HWCAP_THUMB; + elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT); #endif feat_v6_fixup(); @@ -524,7 +543,7 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size) size -= start & ~PAGE_MASK; bank->start = PAGE_ALIGN(start); -#ifndef CONFIG_LPAE +#ifndef CONFIG_ARM_LPAE if (bank->start + size < bank->start) { printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in " "32-bit physical address space\n", (long long)start); @@ -778,8 +797,6 @@ void __init setup_arch(char **cmdline_p) reserve_crashkernel(); - tcm_init(); - #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 79078edbb9bc..47ab90563bf4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -211,6 +211,13 @@ void __cpuinit __cpu_die(unsigned int cpu) } printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + /* + * platform_cpu_kill() is generally expected to do the powering off + * and/or cutting of clocks to the dying CPU. Optionally, this may + * be done by the CPU which is dying in preference to supporting + * this call, but that means there is _no_ synchronisation between + * the requesting CPU and the dying CPU actually losing power. + */ if (!platform_cpu_kill(cpu)) printk("CPU%u: unable to kill\n", cpu); } @@ -230,14 +237,41 @@ void __ref cpu_die(void) idle_task_exit(); local_irq_disable(); - mb(); - /* Tell __cpu_die() that this CPU is now safe to dispose of */ + /* + * Flush the data out of the L1 cache for this CPU. This must be + * before the completion to ensure that data is safely written out + * before platform_cpu_kill() gets called - which may disable + * *this* CPU and power down its cache. + */ + flush_cache_louis(); + + /* + * Tell __cpu_die() that this CPU is now safe to dispose of. Once + * this returns, power and/or clocks can be removed at any point + * from this CPU and its cache by platform_cpu_kill(). + */ RCU_NONIDLE(complete(&cpu_died)); /* - * actual CPU shutdown procedure is at least platform (if not - * CPU) specific. + * Ensure that the cache lines associated with that completion are + * written out. This covers the case where _this_ CPU is doing the + * powering down, to ensure that the completion is visible to the + * CPU waiting for this one. + */ + flush_cache_louis(); + + /* + * The actual CPU shutdown procedure is at least platform (if not + * CPU) specific. This may remove power, or it may simply spin. + * + * Platforms are generally expected *NOT* to return from this call, + * although there are some which do because they have no way to + * power down the CPU. These platforms are the _only_ reason we + * have a return path which uses the fragment of assembly below. + * + * The return path should not be used for platforms which can + * power off the CPU. */ if (smp_ops.cpu_die) smp_ops.cpu_die(cpu); @@ -336,7 +370,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) /* * OK, it's off to the idle thread for us */ - cpu_idle(); + cpu_startup_entry(CPUHP_ONLINE); } void __init smp_cpus_done(unsigned int max_cpus) @@ -673,9 +707,6 @@ static int cpufreq_callback(struct notifier_block *nb, if (freq->flags & CPUFREQ_CONST_LOOPS) return NOTIFY_OK; - if (arm_delay_ops.const_clock) - return NOTIFY_OK; - if (!per_cpu(l_p_j_ref, cpu)) { per_cpu(l_p_j_ref, cpu) = per_cpu(cpu_data, cpu).loops_per_jiffy; diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 45eac87ed66a..5bc1a63284e3 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -41,7 +41,7 @@ void scu_enable(void __iomem *scu_base) #ifdef CONFIG_ARM_ERRATA_764369 /* Cortex-A9 only */ - if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) { scu_ctrl = __raw_readl(scu_base + 0x30); if (!(scu_ctrl & 1)) __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index bd0300531399..9a52a07aa40e 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -12,6 +12,7 @@ #include <asm/smp_plat.h> #include <asm/tlbflush.h> +#include <asm/mmu_context.h> /**********************************************************************/ @@ -69,12 +70,73 @@ static inline void ipi_flush_bp_all(void *ignored) local_flush_bp_all(); } +#ifdef CONFIG_ARM_ERRATA_798181 +static int erratum_a15_798181(void) +{ + unsigned int midr = read_cpuid_id(); + + /* Cortex-A15 r0p0..r3p2 affected */ + if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2) + return 0; + return 1; +} +#else +static int erratum_a15_798181(void) +{ + return 0; +} +#endif + +static void ipi_flush_tlb_a15_erratum(void *arg) +{ + dmb(); +} + +static void broadcast_tlb_a15_erratum(void) +{ + if (!erratum_a15_798181()) + return; + + dummy_flush_tlb_a15_erratum(); + smp_call_function(ipi_flush_tlb_a15_erratum, NULL, 1); +} + +static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm) +{ + int cpu, this_cpu; + cpumask_t mask = { CPU_BITS_NONE }; + + if (!erratum_a15_798181()) + return; + + dummy_flush_tlb_a15_erratum(); + this_cpu = get_cpu(); + for_each_online_cpu(cpu) { + if (cpu == this_cpu) + continue; + /* + * We only need to send an IPI if the other CPUs are running + * the same ASID as the one being invalidated. There is no + * need for locking around the active_asids check since the + * switch_mm() function has at least one dmb() (as required by + * this workaround) in case a context switch happens on + * another CPU after the condition below. + */ + if (atomic64_read(&mm->context.id) == + atomic64_read(&per_cpu(active_asids, cpu))) + cpumask_set_cpu(cpu, &mask); + } + smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1); + put_cpu(); +} + void flush_tlb_all(void) { if (tlb_ops_need_broadcast()) on_each_cpu(ipi_flush_tlb_all, NULL, 1); else local_flush_tlb_all(); + broadcast_tlb_a15_erratum(); } void flush_tlb_mm(struct mm_struct *mm) @@ -83,6 +145,7 @@ void flush_tlb_mm(struct mm_struct *mm) on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1); else local_flush_tlb_mm(mm); + broadcast_tlb_mm_a15_erratum(mm); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) @@ -95,6 +158,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) &ta, 1); } else local_flush_tlb_page(vma, uaddr); + broadcast_tlb_mm_a15_erratum(vma->vm_mm); } void flush_tlb_kernel_page(unsigned long kaddr) @@ -105,6 +169,7 @@ void flush_tlb_kernel_page(unsigned long kaddr) on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1); } else local_flush_tlb_kernel_page(kaddr); + broadcast_tlb_a15_erratum(); } void flush_tlb_range(struct vm_area_struct *vma, @@ -119,6 +184,7 @@ void flush_tlb_range(struct vm_area_struct *vma, &ta, 1); } else local_flush_tlb_range(vma, start, end); + broadcast_tlb_mm_a15_erratum(vma->vm_mm); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) @@ -130,6 +196,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1); } else local_flush_tlb_kernel_range(start, end); + broadcast_tlb_a15_erratum(); } void flush_bp_all(void) diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index ab1017bd1667..087fc321e9e5 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/sched.h> #include <linux/syscalls.h> #include <linux/perf_event.h> @@ -79,27 +80,27 @@ static unsigned long abtcounter; static pid_t previous_pid; #ifdef CONFIG_PROC_FS -static int proc_read_status(char *page, char **start, off_t off, int count, - int *eof, void *data) +static int proc_status_show(struct seq_file *m, void *v) { - char *p = page; - int len; - - p += sprintf(p, "Emulated SWP:\t\t%lu\n", swpcounter); - p += sprintf(p, "Emulated SWPB:\t\t%lu\n", swpbcounter); - p += sprintf(p, "Aborted SWP{B}:\t\t%lu\n", abtcounter); + seq_printf(m, "Emulated SWP:\t\t%lu\n", swpcounter); + seq_printf(m, "Emulated SWPB:\t\t%lu\n", swpbcounter); + seq_printf(m, "Aborted SWP{B}:\t\t%lu\n", abtcounter); if (previous_pid != 0) - p += sprintf(p, "Last process:\t\t%d\n", previous_pid); - - len = (p - page) - off; - if (len < 0) - len = 0; - - *eof = (len <= count) ? 1 : 0; - *start = page + off; + seq_printf(m, "Last process:\t\t%d\n", previous_pid); + return 0; +} - return len; +static int proc_status_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_status_show, PDE_DATA(inode)); } + +static const struct file_operations proc_status_fops = { + .open = proc_status_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; #endif /* @@ -266,14 +267,8 @@ static struct undef_hook swp_hook = { static int __init swp_emulation_init(void) { #ifdef CONFIG_PROC_FS - struct proc_dir_entry *res; - - res = create_proc_entry("cpu/swp_emulation", S_IRUGO, NULL); - - if (!res) + if (!proc_create("cpu/swp_emulation", S_IRUGO, NULL, &proc_status_fops)) return -ENOMEM; - - res->read_proc = proc_read_status; #endif /* CONFIG_PROC_FS */ printk(KERN_NOTICE "Registering SWP/SWPB emulation handler\n"); diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 30ae6bb4a310..f50f19e5c138 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -17,7 +17,6 @@ #include <asm/mach/map.h> #include <asm/memory.h> #include <asm/system_info.h> -#include "tcm.h" static struct gen_pool *tcm_pool; static bool dtcm_present; diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 79282ebcd939..f10316b4ecdc 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -100,7 +100,7 @@ static void __init parse_dt_topology(void) int alloc_size, cpu = 0; alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity); - cpu_capacity = (struct cpu_capacity *)kzalloc(alloc_size, GFP_NOWAIT); + cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT); while ((cn = of_find_node_by_type(cn, "cpu"))) { const u32 *rate, *reg; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 1c089119b2d7..18b32e8e4497 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -204,13 +204,6 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) } #endif -void dump_stack(void) -{ - dump_backtrace(NULL, NULL); -} - -EXPORT_SYMBOL(dump_stack); - void show_stack(struct task_struct *tsk, unsigned long *sp) { dump_backtrace(NULL, tsk); diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index fc96ce6f2357..8dc5e76cb789 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -17,7 +17,7 @@ AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) kvm-arm-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o) obj-y += kvm-arm.o init.o interrupts.o -obj-y += arm.o guest.o mmu.o emulate.o reset.o +obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o mmio.o psci.o obj-$(CONFIG_KVM_ARM_VGIC) += vgic.o obj-$(CONFIG_KVM_ARM_TIMER) += arch_timer.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 5a936988eb24..a0dfc2a53f91 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -30,11 +30,9 @@ #define CREATE_TRACE_POINTS #include "trace.h" -#include <asm/unified.h> #include <asm/uaccess.h> #include <asm/ptrace.h> #include <asm/mman.h> -#include <asm/cputype.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> #include <asm/virt.h> @@ -44,14 +42,13 @@ #include <asm/kvm_emulate.h> #include <asm/kvm_coproc.h> #include <asm/kvm_psci.h> -#include <asm/opcodes.h> #ifdef REQUIRES_VIRT __asm__(".arch_extension virt"); #endif static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page); -static struct vfp_hard_struct __percpu *kvm_host_vfp_state; +static kvm_kernel_vfp_t __percpu *kvm_host_vfp_state; static unsigned long hyp_default_vectors; /* Per-CPU variable containing the currently running vcpu. */ @@ -201,6 +198,7 @@ int kvm_dev_ioctl_check_extension(long ext) break; case KVM_CAP_ARM_SET_DEVICE_ADDR: r = 1; + break; case KVM_CAP_NR_VCPUS: r = num_online_cpus(); break; @@ -303,22 +301,6 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) return 0; } -int __attribute_const__ kvm_target_cpu(void) -{ - unsigned long implementor = read_cpuid_implementor(); - unsigned long part_number = read_cpuid_part_number(); - - if (implementor != ARM_CPU_IMP_ARM) - return -EINVAL; - - switch (part_number) { - case ARM_CPU_PART_CORTEX_A15: - return KVM_ARM_TARGET_CORTEX_A15; - default: - return -EINVAL; - } -} - int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) { int ret; @@ -481,163 +463,6 @@ static void update_vttbr(struct kvm *kvm) spin_unlock(&kvm_vmid_lock); } -static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* SVC called from Hyp mode should never get here */ - kvm_debug("SVC called from Hyp mode shouldn't go here\n"); - BUG(); - return -EINVAL; /* Squash warning */ -} - -static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0), - vcpu->arch.hsr & HSR_HVC_IMM_MASK); - - if (kvm_psci_call(vcpu)) - return 1; - - kvm_inject_undefined(vcpu); - return 1; -} - -static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - if (kvm_psci_call(vcpu)) - return 1; - - kvm_inject_undefined(vcpu); - return 1; -} - -static int handle_pabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* The hypervisor should never cause aborts */ - kvm_err("Prefetch Abort taken from Hyp mode at %#08x (HSR: %#08x)\n", - vcpu->arch.hxfar, vcpu->arch.hsr); - return -EFAULT; -} - -static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* This is either an error in the ws. code or an external abort */ - kvm_err("Data Abort taken from Hyp mode at %#08x (HSR: %#08x)\n", - vcpu->arch.hxfar, vcpu->arch.hsr); - return -EFAULT; -} - -typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *); -static exit_handle_fn arm_exit_handlers[] = { - [HSR_EC_WFI] = kvm_handle_wfi, - [HSR_EC_CP15_32] = kvm_handle_cp15_32, - [HSR_EC_CP15_64] = kvm_handle_cp15_64, - [HSR_EC_CP14_MR] = kvm_handle_cp14_access, - [HSR_EC_CP14_LS] = kvm_handle_cp14_load_store, - [HSR_EC_CP14_64] = kvm_handle_cp14_access, - [HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access, - [HSR_EC_CP10_ID] = kvm_handle_cp10_id, - [HSR_EC_SVC_HYP] = handle_svc_hyp, - [HSR_EC_HVC] = handle_hvc, - [HSR_EC_SMC] = handle_smc, - [HSR_EC_IABT] = kvm_handle_guest_abort, - [HSR_EC_IABT_HYP] = handle_pabt_hyp, - [HSR_EC_DABT] = kvm_handle_guest_abort, - [HSR_EC_DABT_HYP] = handle_dabt_hyp, -}; - -/* - * A conditional instruction is allowed to trap, even though it - * wouldn't be executed. So let's re-implement the hardware, in - * software! - */ -static bool kvm_condition_valid(struct kvm_vcpu *vcpu) -{ - unsigned long cpsr, cond, insn; - - /* - * Exception Code 0 can only happen if we set HCR.TGE to 1, to - * catch undefined instructions, and then we won't get past - * the arm_exit_handlers test anyway. - */ - BUG_ON(((vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT) == 0); - - /* Top two bits non-zero? Unconditional. */ - if (vcpu->arch.hsr >> 30) - return true; - - cpsr = *vcpu_cpsr(vcpu); - - /* Is condition field valid? */ - if ((vcpu->arch.hsr & HSR_CV) >> HSR_CV_SHIFT) - cond = (vcpu->arch.hsr & HSR_COND) >> HSR_COND_SHIFT; - else { - /* This can happen in Thumb mode: examine IT state. */ - unsigned long it; - - it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3); - - /* it == 0 => unconditional. */ - if (it == 0) - return true; - - /* The cond for this insn works out as the top 4 bits. */ - cond = (it >> 4); - } - - /* Shift makes it look like an ARM-mode instruction */ - insn = cond << 28; - return arm_check_condition(insn, cpsr) != ARM_OPCODE_CONDTEST_FAIL; -} - -/* - * Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on - * proper exit to QEMU. - */ -static int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, - int exception_index) -{ - unsigned long hsr_ec; - - switch (exception_index) { - case ARM_EXCEPTION_IRQ: - return 1; - case ARM_EXCEPTION_UNDEFINED: - kvm_err("Undefined exception in Hyp mode at: %#08x\n", - vcpu->arch.hyp_pc); - BUG(); - panic("KVM: Hypervisor undefined exception!\n"); - case ARM_EXCEPTION_DATA_ABORT: - case ARM_EXCEPTION_PREF_ABORT: - case ARM_EXCEPTION_HVC: - hsr_ec = (vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT; - - if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) - || !arm_exit_handlers[hsr_ec]) { - kvm_err("Unkown exception class: %#08lx, " - "hsr: %#08x\n", hsr_ec, - (unsigned int)vcpu->arch.hsr); - BUG(); - } - - /* - * See ARM ARM B1.14.1: "Hyp traps on instructions - * that fail their condition code check" - */ - if (!kvm_condition_valid(vcpu)) { - bool is_wide = vcpu->arch.hsr & HSR_IL; - kvm_skip_instr(vcpu, is_wide); - return 1; - } - - return arm_exit_handlers[hsr_ec](vcpu, run); - default: - kvm_pr_unimpl("Unsupported exception type: %d", - exception_index); - run->exit_reason = KVM_EXIT_INTERNAL_ERROR; - return 0; - } -} - static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu) { if (likely(vcpu->arch.has_run_once)) @@ -972,7 +797,6 @@ long kvm_arch_vm_ioctl(struct file *filp, static void cpu_init_hyp_mode(void *vector) { unsigned long long pgd_ptr; - unsigned long pgd_low, pgd_high; unsigned long hyp_stack_ptr; unsigned long stack_page; unsigned long vector_ptr; @@ -981,20 +805,11 @@ static void cpu_init_hyp_mode(void *vector) __hyp_set_vectors((unsigned long)vector); pgd_ptr = (unsigned long long)kvm_mmu_get_httbr(); - pgd_low = (pgd_ptr & ((1ULL << 32) - 1)); - pgd_high = (pgd_ptr >> 32ULL); stack_page = __get_cpu_var(kvm_arm_hyp_stack_page); hyp_stack_ptr = stack_page + PAGE_SIZE; vector_ptr = (unsigned long)__kvm_hyp_vector; - /* - * Call initialization code, and switch to the full blown - * HYP code. The init code doesn't need to preserve these registers as - * r1-r3 and r12 are already callee save according to the AAPCS. - * Note that we slightly misuse the prototype by casing the pgd_low to - * a void *. - */ - kvm_call_hyp((void *)pgd_low, pgd_high, hyp_stack_ptr, vector_ptr); + __cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr); } /** @@ -1077,7 +892,7 @@ static int init_hyp_mode(void) /* * Map the host VFP structures */ - kvm_host_vfp_state = alloc_percpu(struct vfp_hard_struct); + kvm_host_vfp_state = alloc_percpu(kvm_kernel_vfp_t); if (!kvm_host_vfp_state) { err = -ENOMEM; kvm_err("Cannot allocate host VFP state\n"); @@ -1085,7 +900,7 @@ static int init_hyp_mode(void) } for_each_possible_cpu(cpu) { - struct vfp_hard_struct *vfp; + kvm_kernel_vfp_t *vfp; vfp = per_cpu_ptr(kvm_host_vfp_state, cpu); err = create_hyp_mappings(vfp, vfp + 1); diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index 4ea9a982269c..8eea97be1ed5 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -76,14 +76,14 @@ static bool access_dcsw(struct kvm_vcpu *vcpu, const struct coproc_params *p, const struct coproc_reg *r) { - u32 val; + unsigned long val; int cpu; - cpu = get_cpu(); - if (!p->is_write) return read_from_write_only(vcpu, p); + cpu = get_cpu(); + cpumask_setall(&vcpu->arch.require_dcache_flush); cpumask_clear_cpu(cpu, &vcpu->arch.require_dcache_flush); @@ -293,12 +293,12 @@ static int emulate_cp15(struct kvm_vcpu *vcpu, if (likely(r->access(vcpu, params, r))) { /* Skip instruction, since it was emulated */ - kvm_skip_instr(vcpu, (vcpu->arch.hsr >> 25) & 1); + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); return 1; } /* If access function fails, it should complain. */ } else { - kvm_err("Unsupported guest CP15 access at: %08x\n", + kvm_err("Unsupported guest CP15 access at: %08lx\n", *vcpu_pc(vcpu)); print_cp_instr(params); } @@ -315,14 +315,14 @@ int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run) { struct coproc_params params; - params.CRm = (vcpu->arch.hsr >> 1) & 0xf; - params.Rt1 = (vcpu->arch.hsr >> 5) & 0xf; - params.is_write = ((vcpu->arch.hsr & 1) == 0); + params.CRm = (kvm_vcpu_get_hsr(vcpu) >> 1) & 0xf; + params.Rt1 = (kvm_vcpu_get_hsr(vcpu) >> 5) & 0xf; + params.is_write = ((kvm_vcpu_get_hsr(vcpu) & 1) == 0); params.is_64bit = true; - params.Op1 = (vcpu->arch.hsr >> 16) & 0xf; + params.Op1 = (kvm_vcpu_get_hsr(vcpu) >> 16) & 0xf; params.Op2 = 0; - params.Rt2 = (vcpu->arch.hsr >> 10) & 0xf; + params.Rt2 = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf; params.CRn = 0; return emulate_cp15(vcpu, ¶ms); @@ -347,14 +347,14 @@ int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run) { struct coproc_params params; - params.CRm = (vcpu->arch.hsr >> 1) & 0xf; - params.Rt1 = (vcpu->arch.hsr >> 5) & 0xf; - params.is_write = ((vcpu->arch.hsr & 1) == 0); + params.CRm = (kvm_vcpu_get_hsr(vcpu) >> 1) & 0xf; + params.Rt1 = (kvm_vcpu_get_hsr(vcpu) >> 5) & 0xf; + params.is_write = ((kvm_vcpu_get_hsr(vcpu) & 1) == 0); params.is_64bit = false; - params.CRn = (vcpu->arch.hsr >> 10) & 0xf; - params.Op1 = (vcpu->arch.hsr >> 14) & 0x7; - params.Op2 = (vcpu->arch.hsr >> 17) & 0x7; + params.CRn = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf; + params.Op1 = (kvm_vcpu_get_hsr(vcpu) >> 14) & 0x7; + params.Op2 = (kvm_vcpu_get_hsr(vcpu) >> 17) & 0x7; params.Rt2 = 0; return emulate_cp15(vcpu, ¶ms); diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h index 992adfafa2ff..b7301d3e4799 100644 --- a/arch/arm/kvm/coproc.h +++ b/arch/arm/kvm/coproc.h @@ -84,7 +84,7 @@ static inline bool read_zero(struct kvm_vcpu *vcpu, static inline bool write_to_read_only(struct kvm_vcpu *vcpu, const struct coproc_params *params) { - kvm_debug("CP15 write to read-only register at: %08x\n", + kvm_debug("CP15 write to read-only register at: %08lx\n", *vcpu_pc(vcpu)); print_cp_instr(params); return false; @@ -93,7 +93,7 @@ static inline bool write_to_read_only(struct kvm_vcpu *vcpu, static inline bool read_from_write_only(struct kvm_vcpu *vcpu, const struct coproc_params *params) { - kvm_debug("CP15 read to write-only register at: %08x\n", + kvm_debug("CP15 read to write-only register at: %08lx\n", *vcpu_pc(vcpu)); print_cp_instr(params); return false; diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index d61450ac6665..bdede9e7da51 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -20,6 +20,7 @@ #include <linux/kvm_host.h> #include <asm/kvm_arm.h> #include <asm/kvm_emulate.h> +#include <asm/opcodes.h> #include <trace/events/kvm.h> #include "trace.h" @@ -109,10 +110,10 @@ static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = { * Return a pointer to the register number valid in the current mode of * the virtual CPU. */ -u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) +unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) { - u32 *reg_array = (u32 *)&vcpu->arch.regs; - u32 mode = *vcpu_cpsr(vcpu) & MODE_MASK; + unsigned long *reg_array = (unsigned long *)&vcpu->arch.regs; + unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { case USR_MODE...SVC_MODE: @@ -141,9 +142,9 @@ u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) /* * Return the SPSR for the current mode of the virtual CPU. */ -u32 *vcpu_spsr(struct kvm_vcpu *vcpu) +unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu) { - u32 mode = *vcpu_cpsr(vcpu) & MODE_MASK; + unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { case SVC_MODE: return &vcpu->arch.regs.KVM_ARM_SVC_spsr; @@ -160,20 +161,48 @@ u32 *vcpu_spsr(struct kvm_vcpu *vcpu) } } -/** - * kvm_handle_wfi - handle a wait-for-interrupts instruction executed by a guest - * @vcpu: the vcpu pointer - * @run: the kvm_run structure pointer - * - * Simply sets the wait_for_interrupts flag on the vcpu structure, which will - * halt execution of world-switches and schedule other host processes until - * there is an incoming IRQ or FIQ to the VM. +/* + * A conditional instruction is allowed to trap, even though it + * wouldn't be executed. So let's re-implement the hardware, in + * software! */ -int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run) +bool kvm_condition_valid(struct kvm_vcpu *vcpu) { - trace_kvm_wfi(*vcpu_pc(vcpu)); - kvm_vcpu_block(vcpu); - return 1; + unsigned long cpsr, cond, insn; + + /* + * Exception Code 0 can only happen if we set HCR.TGE to 1, to + * catch undefined instructions, and then we won't get past + * the arm_exit_handlers test anyway. + */ + BUG_ON(!kvm_vcpu_trap_get_class(vcpu)); + + /* Top two bits non-zero? Unconditional. */ + if (kvm_vcpu_get_hsr(vcpu) >> 30) + return true; + + cpsr = *vcpu_cpsr(vcpu); + + /* Is condition field valid? */ + if ((kvm_vcpu_get_hsr(vcpu) & HSR_CV) >> HSR_CV_SHIFT) + cond = (kvm_vcpu_get_hsr(vcpu) & HSR_COND) >> HSR_COND_SHIFT; + else { + /* This can happen in Thumb mode: examine IT state. */ + unsigned long it; + + it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3); + + /* it == 0 => unconditional. */ + if (it == 0) + return true; + + /* The cond for this insn works out as the top 4 bits. */ + cond = (it >> 4); + } + + /* Shift makes it look like an ARM-mode instruction */ + insn = cond << 28; + return arm_check_condition(insn, cpsr) != ARM_OPCODE_CONDTEST_FAIL; } /** @@ -257,9 +286,9 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu) */ void kvm_inject_undefined(struct kvm_vcpu *vcpu) { - u32 new_lr_value; - u32 new_spsr_value; - u32 cpsr = *vcpu_cpsr(vcpu); + unsigned long new_lr_value; + unsigned long new_spsr_value; + unsigned long cpsr = *vcpu_cpsr(vcpu); u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; bool is_thumb = (cpsr & PSR_T_BIT); u32 vect_offset = 4; @@ -291,9 +320,9 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu) */ static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr) { - u32 new_lr_value; - u32 new_spsr_value; - u32 cpsr = *vcpu_cpsr(vcpu); + unsigned long new_lr_value; + unsigned long new_spsr_value; + unsigned long cpsr = *vcpu_cpsr(vcpu); u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; bool is_thumb = (cpsr & PSR_T_BIT); u32 vect_offset; diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 2339d9609d36..152d03612181 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/vmalloc.h> #include <linux/fs.h> +#include <asm/cputype.h> #include <asm/uaccess.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> @@ -180,6 +181,22 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, return -EINVAL; } +int __attribute_const__ kvm_target_cpu(void) +{ + unsigned long implementor = read_cpuid_implementor(); + unsigned long part_number = read_cpuid_part_number(); + + if (implementor != ARM_CPU_IMP_ARM) + return -EINVAL; + + switch (part_number) { + case ARM_CPU_PART_CORTEX_A15: + return KVM_ARM_TARGET_CORTEX_A15; + default: + return -EINVAL; + } +} + int kvm_vcpu_set_target(struct kvm_vcpu *vcpu, const struct kvm_vcpu_init *init) { diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c new file mode 100644 index 000000000000..3d74a0be47db --- /dev/null +++ b/arch/arm/kvm/handle_exit.c @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/kvm.h> +#include <linux/kvm_host.h> +#include <asm/kvm_emulate.h> +#include <asm/kvm_coproc.h> +#include <asm/kvm_mmu.h> +#include <asm/kvm_psci.h> +#include <trace/events/kvm.h> + +#include "trace.h" + +#include "trace.h" + +typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *); + +static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* SVC called from Hyp mode should never get here */ + kvm_debug("SVC called from Hyp mode shouldn't go here\n"); + BUG(); + return -EINVAL; /* Squash warning */ +} + +static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0), + kvm_vcpu_hvc_get_imm(vcpu)); + + if (kvm_psci_call(vcpu)) + return 1; + + kvm_inject_undefined(vcpu); + return 1; +} + +static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + if (kvm_psci_call(vcpu)) + return 1; + + kvm_inject_undefined(vcpu); + return 1; +} + +static int handle_pabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* The hypervisor should never cause aborts */ + kvm_err("Prefetch Abort taken from Hyp mode at %#08lx (HSR: %#08x)\n", + kvm_vcpu_get_hfar(vcpu), kvm_vcpu_get_hsr(vcpu)); + return -EFAULT; +} + +static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* This is either an error in the ws. code or an external abort */ + kvm_err("Data Abort taken from Hyp mode at %#08lx (HSR: %#08x)\n", + kvm_vcpu_get_hfar(vcpu), kvm_vcpu_get_hsr(vcpu)); + return -EFAULT; +} + +/** + * kvm_handle_wfi - handle a wait-for-interrupts instruction executed by a guest + * @vcpu: the vcpu pointer + * @run: the kvm_run structure pointer + * + * Simply sets the wait_for_interrupts flag on the vcpu structure, which will + * halt execution of world-switches and schedule other host processes until + * there is an incoming IRQ or FIQ to the VM. + */ +static int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + trace_kvm_wfi(*vcpu_pc(vcpu)); + kvm_vcpu_block(vcpu); + return 1; +} + +static exit_handle_fn arm_exit_handlers[] = { + [HSR_EC_WFI] = kvm_handle_wfi, + [HSR_EC_CP15_32] = kvm_handle_cp15_32, + [HSR_EC_CP15_64] = kvm_handle_cp15_64, + [HSR_EC_CP14_MR] = kvm_handle_cp14_access, + [HSR_EC_CP14_LS] = kvm_handle_cp14_load_store, + [HSR_EC_CP14_64] = kvm_handle_cp14_access, + [HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access, + [HSR_EC_CP10_ID] = kvm_handle_cp10_id, + [HSR_EC_SVC_HYP] = handle_svc_hyp, + [HSR_EC_HVC] = handle_hvc, + [HSR_EC_SMC] = handle_smc, + [HSR_EC_IABT] = kvm_handle_guest_abort, + [HSR_EC_IABT_HYP] = handle_pabt_hyp, + [HSR_EC_DABT] = kvm_handle_guest_abort, + [HSR_EC_DABT_HYP] = handle_dabt_hyp, +}; + +static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu) +{ + u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu); + + if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) || + !arm_exit_handlers[hsr_ec]) { + kvm_err("Unknown exception class: hsr: %#08x\n", + (unsigned int)kvm_vcpu_get_hsr(vcpu)); + BUG(); + } + + return arm_exit_handlers[hsr_ec]; +} + +/* + * Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on + * proper exit to userspace. + */ +int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, + int exception_index) +{ + exit_handle_fn exit_handler; + + switch (exception_index) { + case ARM_EXCEPTION_IRQ: + return 1; + case ARM_EXCEPTION_UNDEFINED: + kvm_err("Undefined exception in Hyp mode at: %#08lx\n", + kvm_vcpu_get_hyp_pc(vcpu)); + BUG(); + panic("KVM: Hypervisor undefined exception!\n"); + case ARM_EXCEPTION_DATA_ABORT: + case ARM_EXCEPTION_PREF_ABORT: + case ARM_EXCEPTION_HVC: + /* + * See ARM ARM B1.14.1: "Hyp traps on instructions + * that fail their condition code check" + */ + if (!kvm_condition_valid(vcpu)) { + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); + return 1; + } + + exit_handler = kvm_get_exit_handler(vcpu); + + return exit_handler(vcpu, run); + default: + kvm_pr_unimpl("Unsupported exception type: %d", + exception_index); + run->exit_reason = KVM_EXIT_INTERNAL_ERROR; + return 0; + } +} diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 8ca87ab0919d..f7793df62f58 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -35,15 +35,18 @@ __kvm_hyp_code_start: /******************************************************************** * Flush per-VMID TLBs * - * void __kvm_tlb_flush_vmid(struct kvm *kvm); + * void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); * * We rely on the hardware to broadcast the TLB invalidation to all CPUs * inside the inner-shareable domain (which is the case for all v7 * implementations). If we come across a non-IS SMP implementation, we'll * have to use an IPI based mechanism. Until then, we stick to the simple * hardware assisted version. + * + * As v7 does not support flushing per IPA, just nuke the whole TLB + * instead, ignoring the ipa value. */ -ENTRY(__kvm_tlb_flush_vmid) +ENTRY(__kvm_tlb_flush_vmid_ipa) push {r2, r3} add r0, r0, #KVM_VTTBR @@ -60,7 +63,7 @@ ENTRY(__kvm_tlb_flush_vmid) pop {r2, r3} bx lr -ENDPROC(__kvm_tlb_flush_vmid) +ENDPROC(__kvm_tlb_flush_vmid_ipa) /******************************************************************** * Flush TLBs and instruction caches of all CPUs inside the inner-shareable @@ -235,9 +238,9 @@ ENTRY(kvm_call_hyp) * instruction is issued since all traps are disabled when running the host * kernel as per the Hyp-mode initialization at boot time. * - * HVC instructions cause a trap to the vector page + offset 0x18 (see hyp_hvc + * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc * below) when the HVC instruction is called from SVC mode (i.e. a guest or the - * host kernel) and they cause a trap to the vector page + offset 0xc when HVC + * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC * instructions are called from within Hyp-mode. * * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index 98a870ff1a5c..72a12f2171b2 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -33,16 +33,16 @@ */ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) { - __u32 *dest; + unsigned long *dest; unsigned int len; int mask; if (!run->mmio.is_write) { dest = vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt); - memset(dest, 0, sizeof(int)); + *dest = 0; len = run->mmio.len; - if (len > 4) + if (len > sizeof(unsigned long)) return -EINVAL; memcpy(dest, run->mmio.data, len); @@ -50,7 +50,8 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr, *((u64 *)run->mmio.data)); - if (vcpu->arch.mmio_decode.sign_extend && len < 4) { + if (vcpu->arch.mmio_decode.sign_extend && + len < sizeof(unsigned long)) { mask = 1U << ((len * 8) - 1); *dest = (*dest ^ mask) - mask; } @@ -65,40 +66,29 @@ static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, unsigned long rt, len; bool is_write, sign_extend; - if ((vcpu->arch.hsr >> 8) & 1) { + if (kvm_vcpu_dabt_isextabt(vcpu)) { /* cache operation on I/O addr, tell guest unsupported */ - kvm_inject_dabt(vcpu, vcpu->arch.hxfar); + kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu)); return 1; } - if ((vcpu->arch.hsr >> 7) & 1) { + if (kvm_vcpu_dabt_iss1tw(vcpu)) { /* page table accesses IO mem: tell guest to fix its TTBR */ - kvm_inject_dabt(vcpu, vcpu->arch.hxfar); + kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu)); return 1; } - switch ((vcpu->arch.hsr >> 22) & 0x3) { - case 0: - len = 1; - break; - case 1: - len = 2; - break; - case 2: - len = 4; - break; - default: - kvm_err("Hardware is weird: SAS 0b11 is reserved\n"); - return -EFAULT; - } + len = kvm_vcpu_dabt_get_as(vcpu); + if (unlikely(len < 0)) + return len; - is_write = vcpu->arch.hsr & HSR_WNR; - sign_extend = vcpu->arch.hsr & HSR_SSE; - rt = (vcpu->arch.hsr & HSR_SRT_MASK) >> HSR_SRT_SHIFT; + is_write = kvm_vcpu_dabt_iswrite(vcpu); + sign_extend = kvm_vcpu_dabt_issext(vcpu); + rt = kvm_vcpu_dabt_get_rd(vcpu); if (kvm_vcpu_reg_is_pc(vcpu, rt)) { /* IO memory trying to read/write pc */ - kvm_inject_pabt(vcpu, vcpu->arch.hxfar); + kvm_inject_pabt(vcpu, kvm_vcpu_get_hfar(vcpu)); return 1; } @@ -112,7 +102,7 @@ static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, * The MMIO instruction is emulated and should not be re-executed * in the guest. */ - kvm_skip_instr(vcpu, (vcpu->arch.hsr >> 25) & 1); + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); return 0; } @@ -130,7 +120,7 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, * space do its magic. */ - if (vcpu->arch.hsr & HSR_ISV) { + if (kvm_vcpu_dabt_isvalid(vcpu)) { ret = decode_hsr(vcpu, fault_ipa, &mmio); if (ret) return ret; diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 99e07c7dd745..2f12e4056408 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -20,7 +20,6 @@ #include <linux/kvm_host.h> #include <linux/io.h> #include <trace/events/kvm.h> -#include <asm/idmap.h> #include <asm/pgalloc.h> #include <asm/cacheflush.h> #include <asm/kvm_arm.h> @@ -28,8 +27,6 @@ #include <asm/kvm_mmio.h> #include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> -#include <asm/mach/map.h> -#include <trace/events/kvm.h> #include "trace.h" @@ -37,19 +34,9 @@ extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; static DEFINE_MUTEX(kvm_hyp_pgd_mutex); -static void kvm_tlb_flush_vmid(struct kvm *kvm) +static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { - kvm_call_hyp(__kvm_tlb_flush_vmid, kvm); -} - -static void kvm_set_pte(pte_t *pte, pte_t new_pte) -{ - pte_val(*pte) = new_pte; - /* - * flush_pmd_entry just takes a void pointer and cleans the necessary - * cache entries, so we can reuse the function for ptes. - */ - flush_pmd_entry(pte); + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); } static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, @@ -98,33 +85,42 @@ static void free_ptes(pmd_t *pmd, unsigned long addr) } } +static void free_hyp_pgd_entry(unsigned long addr) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + unsigned long hyp_addr = KERN_TO_HYP(addr); + + pgd = hyp_pgd + pgd_index(hyp_addr); + pud = pud_offset(pgd, hyp_addr); + + if (pud_none(*pud)) + return; + BUG_ON(pud_bad(*pud)); + + pmd = pmd_offset(pud, hyp_addr); + free_ptes(pmd, addr); + pmd_free(NULL, pmd); + pud_clear(pud); +} + /** * free_hyp_pmds - free a Hyp-mode level-2 tables and child level-3 tables * * Assumes this is a page table used strictly in Hyp-mode and therefore contains - * only mappings in the kernel memory area, which is above PAGE_OFFSET. + * either mappings in the kernel memory area (above PAGE_OFFSET), or + * device mappings in the vmalloc range (from VMALLOC_START to VMALLOC_END). */ void free_hyp_pmds(void) { - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; unsigned long addr; mutex_lock(&kvm_hyp_pgd_mutex); - for (addr = PAGE_OFFSET; addr != 0; addr += PGDIR_SIZE) { - pgd = hyp_pgd + pgd_index(addr); - pud = pud_offset(pgd, addr); - - if (pud_none(*pud)) - continue; - BUG_ON(pud_bad(*pud)); - - pmd = pmd_offset(pud, addr); - free_ptes(pmd, addr); - pmd_free(NULL, pmd); - pud_clear(pud); - } + for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) + free_hyp_pgd_entry(addr); + for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) + free_hyp_pgd_entry(addr); mutex_unlock(&kvm_hyp_pgd_mutex); } @@ -136,7 +132,9 @@ static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start, struct page *page; for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) { - pte = pte_offset_kernel(pmd, addr); + unsigned long hyp_addr = KERN_TO_HYP(addr); + + pte = pte_offset_kernel(pmd, hyp_addr); BUG_ON(!virt_addr_valid(addr)); page = virt_to_page(addr); kvm_set_pte(pte, mk_pte(page, PAGE_HYP)); @@ -151,7 +149,9 @@ static void create_hyp_io_pte_mappings(pmd_t *pmd, unsigned long start, unsigned long addr; for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) { - pte = pte_offset_kernel(pmd, addr); + unsigned long hyp_addr = KERN_TO_HYP(addr); + + pte = pte_offset_kernel(pmd, hyp_addr); BUG_ON(pfn_valid(*pfn_base)); kvm_set_pte(pte, pfn_pte(*pfn_base, PAGE_HYP_DEVICE)); (*pfn_base)++; @@ -166,12 +166,13 @@ static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start, unsigned long addr, next; for (addr = start; addr < end; addr = next) { - pmd = pmd_offset(pud, addr); + unsigned long hyp_addr = KERN_TO_HYP(addr); + pmd = pmd_offset(pud, hyp_addr); BUG_ON(pmd_sect(*pmd)); if (pmd_none(*pmd)) { - pte = pte_alloc_one_kernel(NULL, addr); + pte = pte_alloc_one_kernel(NULL, hyp_addr); if (!pte) { kvm_err("Cannot allocate Hyp pte\n"); return -ENOMEM; @@ -206,17 +207,23 @@ static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base) unsigned long addr, next; int err = 0; - BUG_ON(start > end); - if (start < PAGE_OFFSET) + if (start >= end) + return -EINVAL; + /* Check for a valid kernel memory mapping */ + if (!pfn_base && (!virt_addr_valid(from) || !virt_addr_valid(to - 1))) + return -EINVAL; + /* Check for a valid kernel IO mapping */ + if (pfn_base && (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1))) return -EINVAL; mutex_lock(&kvm_hyp_pgd_mutex); for (addr = start; addr < end; addr = next) { - pgd = hyp_pgd + pgd_index(addr); - pud = pud_offset(pgd, addr); + unsigned long hyp_addr = KERN_TO_HYP(addr); + pgd = hyp_pgd + pgd_index(hyp_addr); + pud = pud_offset(pgd, hyp_addr); if (pud_none_or_clear_bad(pud)) { - pmd = pmd_alloc_one(NULL, addr); + pmd = pmd_alloc_one(NULL, hyp_addr); if (!pmd) { kvm_err("Cannot allocate Hyp pmd\n"); err = -ENOMEM; @@ -236,12 +243,13 @@ out: } /** - * create_hyp_mappings - map a kernel virtual address range in Hyp mode + * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode * @from: The virtual kernel start address of the range * @to: The virtual kernel end address of the range (exclusive) * - * The same virtual address as the kernel virtual address is also used in - * Hyp-mode mapping to the same underlying physical pages. + * The same virtual address as the kernel virtual address is also used + * in Hyp-mode mapping (modulo HYP_PAGE_OFFSET) to the same underlying + * physical pages. * * Note: Wrapping around zero in the "to" address is not supported. */ @@ -251,10 +259,13 @@ int create_hyp_mappings(void *from, void *to) } /** - * create_hyp_io_mappings - map a physical IO range in Hyp mode - * @from: The virtual HYP start address of the range - * @to: The virtual HYP end address of the range (exclusive) + * create_hyp_io_mappings - duplicate a kernel IO mapping into Hyp mode + * @from: The kernel start VA of the range + * @to: The kernel end VA of the range (exclusive) * @addr: The physical start address which gets mapped + * + * The resulting HYP VA is the same as the kernel VA, modulo + * HYP_PAGE_OFFSET. */ int create_hyp_io_mappings(void *from, void *to, phys_addr_t addr) { @@ -290,7 +301,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) VM_BUG_ON((unsigned long)pgd & (S2_PGD_SIZE - 1)); memset(pgd, 0, PTRS_PER_S2_PGD * sizeof(pgd_t)); - clean_dcache_area(pgd, PTRS_PER_S2_PGD * sizeof(pgd_t)); + kvm_clean_pgd(pgd); kvm->arch.pgd = pgd; return 0; @@ -422,22 +433,22 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, return 0; /* ignore calls from kvm_set_spte_hva */ pmd = mmu_memory_cache_alloc(cache); pud_populate(NULL, pud, pmd); - pmd += pmd_index(addr); get_page(virt_to_page(pud)); - } else - pmd = pmd_offset(pud, addr); + } + + pmd = pmd_offset(pud, addr); /* Create 2nd stage page table mapping - Level 2 */ if (pmd_none(*pmd)) { if (!cache) return 0; /* ignore calls from kvm_set_spte_hva */ pte = mmu_memory_cache_alloc(cache); - clean_pte_table(pte); + kvm_clean_pte(pte); pmd_populate_kernel(NULL, pmd, pte); - pte += pte_index(addr); get_page(virt_to_page(pmd)); - } else - pte = pte_offset_kernel(pmd, addr); + } + + pte = pte_offset_kernel(pmd, addr); if (iomap && pte_present(*pte)) return -EFAULT; @@ -446,7 +457,7 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, old_pte = *pte; kvm_set_pte(pte, *new_pte); if (pte_present(old_pte)) - kvm_tlb_flush_vmid(kvm); + kvm_tlb_flush_vmid_ipa(kvm, addr); else get_page(virt_to_page(pte)); @@ -473,7 +484,8 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, pfn = __phys_to_pfn(pa); for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) { - pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE | L_PTE_S2_RDWR); + pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE); + kvm_set_s2pte_writable(&pte); ret = mmu_topup_memory_cache(&cache, 2, 2); if (ret) @@ -492,29 +504,6 @@ out: return ret; } -static void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn) -{ - /* - * If we are going to insert an instruction page and the icache is - * either VIPT or PIPT, there is a potential problem where the host - * (or another VM) may have used the same page as this guest, and we - * read incorrect data from the icache. If we're using a PIPT cache, - * we can invalidate just that page, but if we are using a VIPT cache - * we need to invalidate the entire icache - damn shame - as written - * in the ARM ARM (DDI 0406C.b - Page B3-1393). - * - * VIVT caches are tagged using both the ASID and the VMID and doesn't - * need any kind of flushing (DDI 0406C.b - Page B3-1392). - */ - if (icache_is_pipt()) { - unsigned long hva = gfn_to_hva(kvm, gfn); - __cpuc_coherent_user_range(hva, hva + PAGE_SIZE); - } else if (!icache_is_vivt_asid_tagged()) { - /* any kind of VIPT cache */ - __flush_icache_all(); - } -} - static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, gfn_t gfn, struct kvm_memory_slot *memslot, unsigned long fault_status) @@ -526,7 +515,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, unsigned long mmu_seq; struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache; - write_fault = kvm_is_write_fault(vcpu->arch.hsr); + write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu)); if (fault_status == FSC_PERM && !write_fault) { kvm_err("Unexpected L2 read permission error\n"); return -EFAULT; @@ -560,7 +549,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (mmu_notifier_retry(vcpu->kvm, mmu_seq)) goto out_unlock; if (writable) { - pte_val(new_pte) |= L_PTE_S2_RDWR; + kvm_set_s2pte_writable(&new_pte); kvm_set_pfn_dirty(pfn); } stage2_set_pte(vcpu->kvm, memcache, fault_ipa, &new_pte, false); @@ -585,7 +574,6 @@ out_unlock: */ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) { - unsigned long hsr_ec; unsigned long fault_status; phys_addr_t fault_ipa; struct kvm_memory_slot *memslot; @@ -593,18 +581,17 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) gfn_t gfn; int ret, idx; - hsr_ec = vcpu->arch.hsr >> HSR_EC_SHIFT; - is_iabt = (hsr_ec == HSR_EC_IABT); - fault_ipa = ((phys_addr_t)vcpu->arch.hpfar & HPFAR_MASK) << 8; + is_iabt = kvm_vcpu_trap_is_iabt(vcpu); + fault_ipa = kvm_vcpu_get_fault_ipa(vcpu); - trace_kvm_guest_fault(*vcpu_pc(vcpu), vcpu->arch.hsr, - vcpu->arch.hxfar, fault_ipa); + trace_kvm_guest_fault(*vcpu_pc(vcpu), kvm_vcpu_get_hsr(vcpu), + kvm_vcpu_get_hfar(vcpu), fault_ipa); /* Check the stage-2 fault is trans. fault or write fault */ - fault_status = (vcpu->arch.hsr & HSR_FSC_TYPE); + fault_status = kvm_vcpu_trap_get_fault(vcpu); if (fault_status != FSC_FAULT && fault_status != FSC_PERM) { - kvm_err("Unsupported fault status: EC=%#lx DFCS=%#lx\n", - hsr_ec, fault_status); + kvm_err("Unsupported fault status: EC=%#x DFCS=%#lx\n", + kvm_vcpu_trap_get_class(vcpu), fault_status); return -EFAULT; } @@ -614,7 +601,7 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) if (!kvm_is_visible_gfn(vcpu->kvm, gfn)) { if (is_iabt) { /* Prefetch Abort on I/O address */ - kvm_inject_pabt(vcpu, vcpu->arch.hxfar); + kvm_inject_pabt(vcpu, kvm_vcpu_get_hfar(vcpu)); ret = 1; goto out_unlock; } @@ -626,8 +613,13 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) goto out_unlock; } - /* Adjust page offset */ - fault_ipa |= vcpu->arch.hxfar & ~PAGE_MASK; + /* + * The IPA is reported as [MAX:12], so we need to + * complement it with the bottom 12 bits from the + * faulting VA. This is always 12 bits, irrespective + * of the page size. + */ + fault_ipa |= kvm_vcpu_get_hfar(vcpu) & ((1 << 12) - 1); ret = io_mem_abort(vcpu, run, fault_ipa); goto out_unlock; } @@ -682,7 +674,7 @@ static void handle_hva_to_gpa(struct kvm *kvm, static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) { unmap_stage2_range(kvm, gpa, PAGE_SIZE); - kvm_tlb_flush_vmid(kvm); + kvm_tlb_flush_vmid_ipa(kvm, gpa); } int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) @@ -776,7 +768,7 @@ void kvm_clear_hyp_idmap(void) pmd = pmd_offset(pud, addr); pud_clear(pud); - clean_pmd_entry(pmd); + kvm_clean_pmd_entry(pmd); pmd_free(NULL, (pmd_t *)((unsigned long)pmd & PAGE_MASK)); } while (pgd++, addr = next, addr < end); } diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c index c9a17316e9fe..17c5ac7d10ed 100644 --- a/arch/arm/kvm/vgic.c +++ b/arch/arm/kvm/vgic.c @@ -883,8 +883,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) lr, irq, vgic_cpu->vgic_lr[lr]); BUG_ON(!test_bit(lr, vgic_cpu->lr_used)); vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT; - - goto out; + return true; } /* Try to use another LR for this interrupt */ @@ -898,7 +897,6 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) vgic_cpu->vgic_irq_lr_map[irq] = lr; set_bit(lr, vgic_cpu->lr_used); -out: if (!vgic_irq_is_edge(vcpu, irq)) vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI; @@ -1018,21 +1016,6 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr); - /* - * We do not need to take the distributor lock here, since the only - * action we perform is clearing the irq_active_bit for an EOIed - * level interrupt. There is a potential race with - * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we - * check if the interrupt is already active. Two possibilities: - * - * - The queuing is occurring on the same vcpu: cannot happen, - * as we're already in the context of this vcpu, and - * executing the handler - * - The interrupt has been migrated to another vcpu, and we - * ignore this interrupt for this run. Big deal. It is still - * pending though, and will get considered when this vcpu - * exits. - */ if (vgic_cpu->vgic_misr & GICH_MISR_EOI) { /* * Some level interrupts have been EOIed. Clear their @@ -1054,6 +1037,13 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) } else { vgic_cpu_irq_clear(vcpu, irq); } + + /* + * Despite being EOIed, the LR may not have + * been marked as empty. + */ + set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr); + vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT; } } @@ -1064,9 +1054,8 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) } /* - * Sync back the VGIC state after a guest run. We do not really touch - * the distributor here (the irq_pending_on_cpu bit is safe to set), - * so there is no need for taking its lock. + * Sync back the VGIC state after a guest run. The distributor lock is + * needed so we don't get preempted in the middle of the state processing. */ static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu) { @@ -1112,10 +1101,14 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu) void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu) { + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + if (!irqchip_in_kernel(vcpu->kvm)) return; + spin_lock(&dist->lock); __kvm_vgic_sync_hwstate(vcpu); + spin_unlock(&dist->lock); } int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu) @@ -1484,7 +1477,7 @@ int kvm_vgic_set_addr(struct kvm *kvm, unsigned long type, u64 addr) if (addr & ~KVM_PHYS_MASK) return -E2BIG; - if (addr & ~PAGE_MASK) + if (addr & (SZ_4K - 1)) return -EINVAL; mutex_lock(&kvm->lock); diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 6b93f6a1a3c7..64dbfa57204a 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -58,7 +58,7 @@ static void __timer_delay(unsigned long cycles) static void __timer_const_udelay(unsigned long xloops) { unsigned long long loops = xloops; - loops *= loops_per_jiffy; + loops *= arm_delay_ops.ticks_per_jiffy; __timer_delay(loops >> UDELAY_SHIFT); } @@ -73,11 +73,13 @@ void __init register_current_timer_delay(const struct delay_timer *timer) pr_info("Switching to timer-based delay loop\n"); delay_timer = timer; lpj_fine = timer->freq / HZ; - loops_per_jiffy = lpj_fine; + + /* cpufreq may scale loops_per_jiffy, so keep a private copy */ + arm_delay_ops.ticks_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; - arm_delay_ops.const_clock = true; + delay_calibrated = true; } else { pr_info("Ignoring duplicate/late registration of read_current_timer delay\n"); diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 6071f4c3d654..02802386b894 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,14 +1,15 @@ if ARCH_AT91 -config HAVE_AT91_DATAFLASH_CARD - bool - config HAVE_AT91_DBGU0 bool config HAVE_AT91_DBGU1 bool +config AT91_PMC_UNIT + bool + default !ARCH_AT91X40 + config AT91_SAM9_ALT_RESET bool default !ARCH_AT91X40 @@ -17,17 +18,59 @@ config AT91_SAM9G45_RESET bool default !ARCH_AT91X40 +config AT91_SAM9_TIME + bool + config SOC_AT91SAM9 bool + select AT91_SAM9_TIME select CPU_ARM926T select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER select SPARSE_IRQ +config SOC_SAMA5 + bool + select AT91_SAM9_TIME + select CPU_V7 + select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + menu "Atmel AT91 System-on-Chip" +choice + + prompt "Core type" + +config SOC_SAM_V4_V5 + bool "ARM7/ARM9" + help + Select this if you are using one of Atmel's AT91SAM9, AT91RM9200 + or AT91X40 SoC. + +config SOC_SAM_V7 + bool "Cortex A5" + help + Select this if you are using one of Atmel's SAMA5D3 SoC. + +endchoice + comment "Atmel AT91 Processor" +if SOC_SAM_V7 +config SOC_SAMA5D3 + bool "SAMA5D3 family" + depends on SOC_SAM_V7 + select SOC_SAMA5 + select HAVE_FB_ATMEL + select HAVE_AT91_DBGU1 + help + Select this if you are using one of Atmel's SAMA5D3 family SoC. + This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35. +endif + +if SOC_SAM_V4_V5 config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T @@ -93,394 +136,10 @@ config SOC_AT91SAM9N12 help Select this if you are using Atmel's AT91SAM9N12 SoC. -choice - prompt "Atmel AT91 Processor Devices for non DT boards" - -config ARCH_AT91_NONE - bool "None" - -config ARCH_AT91RM9200 - bool "AT91RM9200" - select SOC_AT91RM9200 - -config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE" - select SOC_AT91SAM9260 - -config ARCH_AT91SAM9261 - bool "AT91SAM9261" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9G10 - bool "AT91SAM9G10" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9263 - bool "AT91SAM9263" - select SOC_AT91SAM9263 - -config ARCH_AT91SAM9RL - bool "AT91SAM9RL" - select SOC_AT91SAM9RL - -config ARCH_AT91SAM9G20 - bool "AT91SAM9G20" - select SOC_AT91SAM9260 - -config ARCH_AT91SAM9G45 - bool "AT91SAM9G45" - select SOC_AT91SAM9G45 - -config ARCH_AT91X40 - bool "AT91x40" - depends on !MMU - select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - -endchoice - -config AT91_PMC_UNIT - bool - default !ARCH_AT91X40 - -# ---------------------------------------------------------- - -if ARCH_AT91RM9200 - -comment "AT91RM9200 Board Type" - -config MACH_ONEARM - bool "Ajeco 1ARM Single Board Computer" - help - Select this if you are using Ajeco's 1ARM Single Board Computer. - <http://www.ajeco.fi/> - -config ARCH_AT91RM9200DK - bool "Atmel AT91RM9200-DK Development board" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91RM9200-DK Development board. - (Discontinued) - -config MACH_AT91RM9200EK - bool "Atmel AT91RM9200-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> - -config MACH_CSB337 - bool "Cogent CSB337" - help - Select this if you are using Cogent's CSB337 board. - <http://www.cogcomp.com/csb_csb337.htm> - -config MACH_CSB637 - bool "Cogent CSB637" - help - Select this if you are using Cogent's CSB637 board. - <http://www.cogcomp.com/csb_csb637.htm> - -config MACH_CARMEVA - bool "Conitec ARM&EVA" - help - Select this if you are using Conitec's AT91RM9200-MCU-Module. - <http://www.conitec.net/english/linuxboard.php> - -config MACH_ATEB9200 - bool "Embest ATEB9200" - help - Select this if you are using Embest's ATEB9200 board. - <http://www.embedinfo.com/english/product/ATEB9200.asp> - -config MACH_KB9200 - bool "KwikByte KB920x" - help - Select this if you are using KwikByte's KB920x board. - <http://www.kwikbyte.com/KB9202.html> - -config MACH_PICOTUX2XX - bool "picotux 200" - help - Select this if you are using a picotux 200. - <http://www.picotux.com/> - -config MACH_KAFA - bool "Sperry-Sun KAFA board" - help - Select this if you are using Sperry-Sun's KAFA board. - -config MACH_ECBAT91 - bool "emQbit ECB_AT91 SBC" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using emQbit's ECB_AT91 board. - <http://wiki.emqbit.com/free-ecb-at91> - -config MACH_YL9200 - bool "ucDragon YL-9200" - help - Select this if you are using the ucDragon YL-9200 board. - -config MACH_CPUAT91 - bool "Eukrea CPUAT91" - help - Select this if you are using the Eukrea Electromatique's - CPUAT91 board <http://www.eukrea.com/>. - -config MACH_ECO920 - bool "eco920" - help - Select this if you are using the eco920 board - -config MACH_RSI_EWS - bool "RSI Embedded Webserver" - depends on ARCH_AT91RM9200 - help - Select this if you are using RSIs EWS board. -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9260 - -comment "AT91SAM9260 Variants" - -comment "AT91SAM9260 / AT91SAM9XE Board Type" - -config MACH_AT91SAM9260EK - bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> - -config MACH_CAM60 - bool "KwikByte KB9260 (CAM60) board" - help - Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. - <http://www.kwikbyte.com/KB9260.html> - -config MACH_SAM9_L9260 - bool "Olimex SAM9-L9260 board" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. - <http://www.olimex.com/dev/sam9-L9260.html> - -config MACH_AFEB9260 - bool "Custom afeb9260 board v1" - help - Select this if you are using custom afeb9260 board based on - open hardware design. Select this for revision 1 of the board. - <svn://194.85.238.22/home/users/george/svn/arm9eb> - <http://groups.google.com/group/arm9fpga-evolution-board> - -config MACH_USB_A9260 - bool "CALAO USB-A9260" - help - Select this if you are using a Calao Systems USB-A9260. - <http://www.calao-systems.com> - -config MACH_QIL_A9260 - bool "CALAO QIL-A9260 board" - help - Select this if you are using a Calao Systems QIL-A9260 Board. - <http://www.calao-systems.com> - -config MACH_CPU9260 - bool "Eukrea CPU9260 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9260 Board <http://www.eukrea.com/> - -config MACH_FLEXIBITY - bool "Flexibity Connect board" - help - Select this if you are using Flexibity Connect board - <http://www.flexibity.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9261 - -comment "AT91SAM9261 Board Type" - -config MACH_AT91SAM9261EK - bool "Atmel AT91SAM9261-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G10 - -comment "AT91SAM9G10 Board Type" - -config MACH_AT91SAM9G10EK - bool "Atmel AT91SAM9G10-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9263 - -comment "AT91SAM9263 Board Type" - -config MACH_AT91SAM9263EK - bool "Atmel AT91SAM9263-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> - -config MACH_USB_A9263 - bool "CALAO USB-A9263" - help - Select this if you are using a Calao Systems USB-A9263. - <http://www.calao-systems.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9RL - -comment "AT91SAM9RL Board Type" - -config MACH_AT91SAM9RLEK - bool "Atmel AT91SAM9RL-EK Evaluation Kit" - help - Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. - -endif - # ---------------------------------------------------------- -if ARCH_AT91SAM9G20 - -comment "AT91SAM9G20 Board Type" - -config MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit - that embeds only one SD/MMC slot. - -config MACH_AT91SAM9G20EK_2MMC - depends on MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - help - Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit - with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and - onwards. - <http://www.atmel.com/tools/SAM9G20-EK.aspx> - -config MACH_CPU9G20 - bool "Eukrea CPU9G20 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9G20 Board <http://www.eukrea.com/> - -config MACH_ACMENETUSFOXG20 - bool "Acme Systems srl FOX Board G20" - help - Select this if you are using Acme Systems - FOX Board G20 <http://www.acmesystems.it> - -config MACH_PORTUXG20 - bool "taskit PortuxG20" - help - Select this if you are using taskit's PortuxG20. - <http://www.taskit.de/en/> - -config MACH_STAMP9G20 - bool "taskit Stamp9G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on its - evaluation board. - <http://www.taskit.de/en/> - -config MACH_PCONTROL_G20 - bool "PControl G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on this - carrier board, beeing the decentralized unit of a building automation - system; featuring nvram, eth-switch, iso-rs485, display, io - -config MACH_GSIA18S - bool "GS_IA18_S board" - help - This enables support for the GS_IA18_S board - produced by GeoSIG Ltd company. This is an internet accelerograph. - <http://www.geosig.com> - -config MACH_USB_A9G20 - bool "CALAO USB-A9G20" - depends on ARCH_AT91SAM9G20 - help - Select this if you are using a Calao Systems USB-A9G20. - <http://www.calao-systems.com> - -endif - -if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) -comment "AT91SAM9260/AT91SAM9G20 boards" - -config MACH_SNAPPER_9260 - bool "Bluewater Systems Snapper 9260/9G20 module" - help - Select this if you are using the Bluewater Systems Snapper 9260 or - Snapper 9G20 modules. - <http://www.bluewatersys.com/> -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G45 - -comment "AT91SAM9G45 Board Type" - -config MACH_AT91SAM9M10G45EK - bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - help - Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. - Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 - families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. - <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91X40 - -comment "AT91X40 Board Type" - -config MACH_AT91EB01 - bool "Atmel AT91EB01 Evaluation Kit" - help - Select this if you are using Atmel's AT91EB01 Evaluation Kit. - It is also a popular target for simulators such as GDB's - ARM simulator (commonly known as the ARMulator) and the - Skyeye simulator. - -endif - -# ---------------------------------------------------------- +source arch/arm/mach-at91/Kconfig.non_dt +endif # SOC_SAM_V4_V5 comment "Generic Board Type" @@ -492,7 +151,7 @@ config MACH_AT91RM9200_DT Select this if you want to experiment device-tree with an Atmel RM9200 Evaluation Kit. -config MACH_AT91SAM_DT +config MACH_AT91SAM9_DT bool "Atmel AT91SAM Evaluation Kits with device-tree support" depends on SOC_AT91SAM9 select USE_OF @@ -500,15 +159,13 @@ config MACH_AT91SAM_DT Select this if you want to experiment device-tree with an Atmel Evaluation Kit. -# ---------------------------------------------------------- - -comment "AT91 Board Options" - -config MTD_AT91_DATAFLASH_CARD - bool "Enable DataFlash Card support" - depends on HAVE_AT91_DATAFLASH_CARD +config MACH_SAMA5_DT + bool "Atmel SAMA5 Evaluation Kits with device-tree support" + depends on SOC_SAMA5 + select USE_OF help - Enable support for the DataFlash card. + Select this if you want to experiment device-tree with + an Atmel Evaluation Kit. # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt new file mode 100644 index 000000000000..6c24985515a2 --- /dev/null +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -0,0 +1,399 @@ +menu "Atmel Non-DT world" + +config HAVE_AT91_DATAFLASH_CARD + bool + +choice + prompt "Atmel AT91 Processor Devices for non DT boards" + +config ARCH_AT91_NONE + bool "None" + +config ARCH_AT91RM9200 + bool "AT91RM9200" + select SOC_AT91RM9200 + +config ARCH_AT91SAM9260 + bool "AT91SAM9260 or AT91SAM9XE" + select SOC_AT91SAM9260 + +config ARCH_AT91SAM9261 + bool "AT91SAM9261" + select SOC_AT91SAM9261 + +config ARCH_AT91SAM9G10 + bool "AT91SAM9G10" + select SOC_AT91SAM9261 + +config ARCH_AT91SAM9263 + bool "AT91SAM9263" + select SOC_AT91SAM9263 + +config ARCH_AT91SAM9RL + bool "AT91SAM9RL" + select SOC_AT91SAM9RL + +config ARCH_AT91SAM9G20 + bool "AT91SAM9G20" + select SOC_AT91SAM9260 + +config ARCH_AT91SAM9G45 + bool "AT91SAM9G45" + select SOC_AT91SAM9G45 + +config ARCH_AT91X40 + bool "AT91x40" + depends on !MMU + select ARCH_USES_GETTIMEOFFSET + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + +endchoice + +# ---------------------------------------------------------- + +if ARCH_AT91RM9200 + +comment "AT91RM9200 Board Type" + +config MACH_ONEARM + bool "Ajeco 1ARM Single Board Computer" + help + Select this if you are using Ajeco's 1ARM Single Board Computer. + <http://www.ajeco.fi/> + +config ARCH_AT91RM9200DK + bool "Atmel AT91RM9200-DK Development board" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91RM9200-DK Development board. + (Discontinued) + +config MACH_AT91RM9200EK + bool "Atmel AT91RM9200-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> + +config MACH_CSB337 + bool "Cogent CSB337" + help + Select this if you are using Cogent's CSB337 board. + <http://www.cogcomp.com/csb_csb337.htm> + +config MACH_CSB637 + bool "Cogent CSB637" + help + Select this if you are using Cogent's CSB637 board. + <http://www.cogcomp.com/csb_csb637.htm> + +config MACH_CARMEVA + bool "Conitec ARM&EVA" + help + Select this if you are using Conitec's AT91RM9200-MCU-Module. + <http://www.conitec.net/english/linuxboard.php> + +config MACH_ATEB9200 + bool "Embest ATEB9200" + help + Select this if you are using Embest's ATEB9200 board. + <http://www.embedinfo.com/english/product/ATEB9200.asp> + +config MACH_KB9200 + bool "KwikByte KB920x" + help + Select this if you are using KwikByte's KB920x board. + <http://www.kwikbyte.com/KB9202.html> + +config MACH_PICOTUX2XX + bool "picotux 200" + help + Select this if you are using a picotux 200. + <http://www.picotux.com/> + +config MACH_KAFA + bool "Sperry-Sun KAFA board" + help + Select this if you are using Sperry-Sun's KAFA board. + +config MACH_ECBAT91 + bool "emQbit ECB_AT91 SBC" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using emQbit's ECB_AT91 board. + <http://wiki.emqbit.com/free-ecb-at91> + +config MACH_YL9200 + bool "ucDragon YL-9200" + help + Select this if you are using the ucDragon YL-9200 board. + +config MACH_CPUAT91 + bool "Eukrea CPUAT91" + help + Select this if you are using the Eukrea Electromatique's + CPUAT91 board <http://www.eukrea.com/>. + +config MACH_ECO920 + bool "eco920" + help + Select this if you are using the eco920 board + +config MACH_RSI_EWS + bool "RSI Embedded Webserver" + depends on ARCH_AT91RM9200 + help + Select this if you are using RSIs EWS board. +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9260 + +comment "AT91SAM9260 Variants" + +comment "AT91SAM9260 / AT91SAM9XE Board Type" + +config MACH_AT91SAM9260EK + bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> + +config MACH_CAM60 + bool "KwikByte KB9260 (CAM60) board" + help + Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. + <http://www.kwikbyte.com/KB9260.html> + +config MACH_SAM9_L9260 + bool "Olimex SAM9-L9260 board" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. + <http://www.olimex.com/dev/sam9-L9260.html> + +config MACH_AFEB9260 + bool "Custom afeb9260 board v1" + help + Select this if you are using custom afeb9260 board based on + open hardware design. Select this for revision 1 of the board. + <svn://194.85.238.22/home/users/george/svn/arm9eb> + <http://groups.google.com/group/arm9fpga-evolution-board> + +config MACH_USB_A9260 + bool "CALAO USB-A9260" + help + Select this if you are using a Calao Systems USB-A9260. + <http://www.calao-systems.com> + +config MACH_QIL_A9260 + bool "CALAO QIL-A9260 board" + help + Select this if you are using a Calao Systems QIL-A9260 Board. + <http://www.calao-systems.com> + +config MACH_CPU9260 + bool "Eukrea CPU9260 board" + help + Select this if you are using a Eukrea Electromatique's + CPU9260 Board <http://www.eukrea.com/> + +config MACH_FLEXIBITY + bool "Flexibity Connect board" + help + Select this if you are using Flexibity Connect board + <http://www.flexibity.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9261 + +comment "AT91SAM9261 Board Type" + +config MACH_AT91SAM9261EK + bool "Atmel AT91SAM9261-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G10 + +comment "AT91SAM9G10 Board Type" + +config MACH_AT91SAM9G10EK + bool "Atmel AT91SAM9G10-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9263 + +comment "AT91SAM9263 Board Type" + +config MACH_AT91SAM9263EK + bool "Atmel AT91SAM9263-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> + +config MACH_USB_A9263 + bool "CALAO USB-A9263" + help + Select this if you are using a Calao Systems USB-A9263. + <http://www.calao-systems.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9RL + +comment "AT91SAM9RL Board Type" + +config MACH_AT91SAM9RLEK + bool "Atmel AT91SAM9RL-EK Evaluation Kit" + help + Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G20 + +comment "AT91SAM9G20 Board Type" + +config MACH_AT91SAM9G20EK + bool "Atmel AT91SAM9G20-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit + that embeds only one SD/MMC slot. + +config MACH_AT91SAM9G20EK_2MMC + depends on MACH_AT91SAM9G20EK + bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" + help + Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit + with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and + onwards. + <http://www.atmel.com/tools/SAM9G20-EK.aspx> + +config MACH_CPU9G20 + bool "Eukrea CPU9G20 board" + help + Select this if you are using a Eukrea Electromatique's + CPU9G20 Board <http://www.eukrea.com/> + +config MACH_ACMENETUSFOXG20 + bool "Acme Systems srl FOX Board G20" + help + Select this if you are using Acme Systems + FOX Board G20 <http://www.acmesystems.it> + +config MACH_PORTUXG20 + bool "taskit PortuxG20" + help + Select this if you are using taskit's PortuxG20. + <http://www.taskit.de/en/> + +config MACH_STAMP9G20 + bool "taskit Stamp9G20 CPU module" + help + Select this if you are using taskit's Stamp9G20 CPU module on its + evaluation board. + <http://www.taskit.de/en/> + +config MACH_PCONTROL_G20 + bool "PControl G20 CPU module" + help + Select this if you are using taskit's Stamp9G20 CPU module on this + carrier board, beeing the decentralized unit of a building automation + system; featuring nvram, eth-switch, iso-rs485, display, io + +config MACH_GSIA18S + bool "GS_IA18_S board" + help + This enables support for the GS_IA18_S board + produced by GeoSIG Ltd company. This is an internet accelerograph. + <http://www.geosig.com> + +config MACH_USB_A9G20 + bool "CALAO USB-A9G20" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using a Calao Systems USB-A9G20. + <http://www.calao-systems.com> + +endif + +if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) +comment "AT91SAM9260/AT91SAM9G20 boards" + +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" + help + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G45 + +comment "AT91SAM9G45 Board Type" + +config MACH_AT91SAM9M10G45EK + bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" + help + Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. + Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 + families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. + <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91X40 + +comment "AT91X40 Board Type" + +config MACH_AT91EB01 + bool "Atmel AT91EB01 Evaluation Kit" + help + Select this if you are using Atmel's AT91EB01 Evaluation Kit. + It is also a popular target for simulators such as GDB's + ARM simulator (commonly known as the ARMulator) and the + Skyeye simulator. + +endif + +# ---------------------------------------------------------- + +comment "AT91 Board Options" + +config MTD_AT91_DATAFLASH_CARD + bool "Enable DataFlash Card support" + depends on HAVE_AT91_DATAFLASH_CARD + help + Enable support for the DataFlash card. + +endmenu diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 39218ca6d8e8..788562dccb43 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -10,7 +10,8 @@ obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o -obj-$(CONFIG_SOC_AT91SAM9) += at91sam926x_time.o sam9_smc.o +obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o +obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o @@ -21,6 +22,7 @@ obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o +obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o @@ -87,8 +89,11 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree -obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o -obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o +obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o +obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o + +# SAMA5 board with device-tree +obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h index 875fa336800b..a600e6992920 100644 --- a/arch/arm/mach-at91/at91_rstc.h +++ b/arch/arm/mach-at91/at91_rstc.h @@ -23,7 +23,7 @@ extern void __iomem *at91_rstc_base; __raw_readl(at91_rstc_base + field) #define at91_rstc_write(field, value) \ - __raw_writel(value, at91_rstc_base + field); + __raw_writel(value, at91_rstc_base + field) #else .extern at91_rstc_base #endif diff --git a/arch/arm/mach-at91/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h index 60478ea8bd46..9e29f31ec9a6 100644 --- a/arch/arm/mach-at91/at91_shdwc.h +++ b/arch/arm/mach-at91/at91_shdwc.h @@ -23,7 +23,7 @@ extern void __iomem *at91_shdwc_base; __raw_readl(at91_shdwc_base + field) #define at91_shdwc_write(field, value) \ - __raw_writel(value, at91_shdwc_base + field); + __raw_writel(value, at91_shdwc_base + field) #endif #define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 9706c000f294..d193a409bc45 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -212,6 +212,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("mci_clk", "fffb4000.mmc", &mmc_clk), CLKDEV_CON_DEV_ID("emac_clk", "fffbc000.ethernet", ðer_clk), + CLKDEV_CON_DEV_ID(NULL, "fffb8000.i2c", &twi_clk), CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), @@ -384,7 +385,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -AT91_SOC_START(rm9200) +AT91_SOC_START(at91rm9200) .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, .ioremap_registers = at91rm9200_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b67cd5374117..a8ce24538da6 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -232,6 +232,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -395,7 +397,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -AT91_SOC_START(sam9260) +AT91_SOC_START(at91sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, .ioremap_registers = at91sam9260_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 0204f4cc9ebf..25efb5ac30f1 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -339,7 +339,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -AT91_SOC_START(sam9261) +AT91_SOC_START(at91sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, .ioremap_registers = at91sam9261_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 2282fd7ad3e3..f44ffd2105a7 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -375,7 +375,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -AT91_SOC_START(sam9263) +AT91_SOC_START(at91sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .ioremap_registers = at91sam9263_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index c68960d82247..8b7fce067652 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -264,6 +264,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), @@ -420,7 +422,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -AT91_SOC_START(sam9g45) +AT91_SOC_START(at91sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .ioremap_registers = at91sam9g45_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index fe626d431b69..acb703e13331 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -18,7 +18,7 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> -#include <linux/platform_data/atmel-aes.h> +#include <linux/platform_data/crypto-atmel.h> #include <linux/platform_data/at91_adc.h> @@ -1904,7 +1904,8 @@ static void __init at91_add_device_tdes(void) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE) -static struct aes_platform_data aes_data; +static struct crypto_platform_data aes_data; +static struct crypto_dma_data alt_atslave; static u64 aes_dmamask = DMA_BIT_MASK(32); static struct resource aes_resources[] = { @@ -1935,23 +1936,20 @@ static struct platform_device at91sam9g45_aes_device = { static void __init at91_add_device_aes(void) { struct at_dma_slave *atslave; - struct aes_dma_data *alt_atslave; - - alt_atslave = kzalloc(sizeof(struct aes_dma_data), GFP_KERNEL); /* DMA TX slave channel configuration */ - atslave = &alt_atslave->txdata; + atslave = &alt_atslave.txdata; atslave->dma_dev = &at_hdmac_device.dev; atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW | ATC_SRC_PER(AT_DMA_ID_AES_RX); /* DMA RX slave channel configuration */ - atslave = &alt_atslave->rxdata; + atslave = &alt_atslave.rxdata; atslave->dma_dev = &at_hdmac_device.dev; atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW | ATC_DST_PER(AT_DMA_ID_AES_TX); - aes_data.dma_slave = alt_atslave; + aes_data.dma_slave = &alt_atslave; platform_device_register(&at91sam9g45_aes_device); } #else diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 5dfc8fd87103..13cdbcd48f51 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -172,6 +172,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), @@ -226,7 +228,7 @@ void __init at91sam9n12_initialize(void) at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); } -AT91_SOC_START(sam9n12) +AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, .init = at91sam9n12_initialize, diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 3de3e04d0f81..f77fae5591bc 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -341,7 +341,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -AT91_SOC_START(sam9rl) +AT91_SOC_START(at91sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, .ioremap_registers = at91sam9rl_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 44a9a62dcc13..e631fec040ce 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -237,6 +237,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), @@ -320,7 +322,7 @@ static void __init at91sam9x5_map_io(void) * Interrupt initialization * -------------------------------------------------------------------- */ -AT91_SOC_START(sam9x5) +AT91_SOC_START(at91sam9x5) .map_io = at91sam9x5_map_io, .register_clocks = at91sam9x5_register_clocks, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 0c07a4459cb2..2919eba41ff4 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -33,7 +33,7 @@ __raw_readl(AT91_IO_P2V(AT91_TC) + field) #define at91_tc_write(field, value) \ - __raw_writel(value, AT91_IO_P2V(AT91_TC) + field); + __raw_writel(value, AT91_IO_P2V(AT91_TC) + field) /* * 3 counter/timer units present. diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-dt-rm9200.c index 3fcb6623a33e..3fcb6623a33e 100644 --- a/arch/arm/mach-at91/board-rm9200-dt.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt-sam9.c index 8db30132abed..8db30132abed 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt-sam9.c diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c new file mode 100644 index 000000000000..705305e62bbc --- /dev/null +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -0,0 +1,86 @@ +/* + * Setup code for SAMA5 Evaluation Kits with Device Tree support + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/micrel_phy.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/phy.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "at91_aic.h" +#include "generic.h" + + +static const struct of_device_id irq_of_match[] __initconst = { + + { .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init }, + { /*sentinel*/ } +}; + +static void __init at91_dt_init_irq(void) +{ + of_irq_init(irq_of_match); +} + +static int ksz9021rn_phy_fixup(struct phy_device *phy) +{ + int value; + +#define GMII_RCCPSR 260 +#define GMII_RRDPSR 261 +#define GMII_ERCR 11 +#define GMII_ERDWR 12 + + /* Set delay values */ + value = GMII_RCCPSR | 0x8000; + phy_write(phy, GMII_ERCR, value); + value = 0xF2F4; + phy_write(phy, GMII_ERDWR, value); + value = GMII_RRDPSR | 0x8000; + phy_write(phy, GMII_ERCR, value); + value = 0x2222; + phy_write(phy, GMII_ERDWR, value); + + return 0; +} + +static void __init sama5_dt_device_init(void) +{ + if (of_machine_is_compatible("atmel,sama5d3xcm")) + phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, + ksz9021rn_phy_fixup); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *sama5_dt_board_compat[] __initdata = { + "atmel,sama5", + NULL +}; + +DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)") + /* Maintainer: Atmel */ + .init_time = at91sam926x_pit_init, + .map_io = at91_map_io, + .handle_irq = at91_aic5_handle_irq, + .init_early = at91_dt_initialize, + .init_irq = at91_dt_init_irq, + .init_machine = sama5_dt_device_init, + .dt_compat = sama5_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 33361505c0cd..da841885d01c 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -54,7 +54,10 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); */ #define cpu_has_utmi() ( cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5()) + || cpu_is_at91sam9x5() \ + || cpu_is_sama5d3()) + +#define cpu_has_1056M_plla() (cpu_is_sama5d3()) #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ || cpu_is_at91sam9g45() \ @@ -75,7 +78,8 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); || cpu_is_at91sam9n12())) #define cpu_has_upll() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5()) + || cpu_is_at91sam9x5() \ + || cpu_is_sama5d3()) /* USB host HS & FS */ #define cpu_has_uhp() (!cpu_is_at91sam9rl()) @@ -83,18 +87,22 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); /* USB device FS only */ #define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5())) + || cpu_is_at91sam9x5() \ + || cpu_is_sama5d3())) #define cpu_has_plladiv2() (cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12()) + || cpu_is_at91sam9n12() \ + || cpu_is_sama5d3()) #define cpu_has_mdiv3() (cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12()) + || cpu_is_at91sam9n12() \ + || cpu_is_sama5d3()) #define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12()) + || cpu_is_at91sam9n12() \ + || cpu_is_sama5d3()) static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); @@ -210,10 +218,26 @@ struct clk mck = { static void pmc_periph_mode(struct clk *clk, int is_on) { - if (is_on) - at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask); - else - at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask); + u32 regval = 0; + + /* + * With sama5d3 devices, we are managing clock division so we have to + * use the Peripheral Control Register introduced from at91sam9x5 + * devices. + */ + if (cpu_is_sama5d3()) { + regval |= AT91_PMC_PCR_CMD; /* write command */ + regval |= clk->pid & AT91_PMC_PCR_PID; /* peripheral selection */ + regval |= AT91_PMC_PCR_DIV(clk->div); + if (is_on) + regval |= AT91_PMC_PCR_EN; /* enable clock */ + at91_pmc_write(AT91_PMC_PCR, regval); + } else { + if (is_on) + at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask); + else + at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask); + } } static struct clk __init *at91_css_to_clk(unsigned long css) @@ -443,14 +467,18 @@ static void __init init_programmable_clock(struct clk *clk) static int at91_clk_show(struct seq_file *s, void *unused) { - u32 scsr, pcsr, uckr = 0, sr; + u32 scsr, pcsr, pcsr1 = 0, uckr = 0, sr; struct clk *clk; scsr = at91_pmc_read(AT91_PMC_SCSR); pcsr = at91_pmc_read(AT91_PMC_PCSR); + if (cpu_is_sama5d3()) + pcsr1 = at91_pmc_read(AT91_PMC_PCSR1); sr = at91_pmc_read(AT91_PMC_SR); seq_printf(s, "SCSR = %8x\n", scsr); seq_printf(s, "PCSR = %8x\n", pcsr); + if (cpu_is_sama5d3()) + seq_printf(s, "PCSR1 = %8x\n", pcsr1); seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR)); seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR)); seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR)); @@ -470,20 +498,30 @@ static int at91_clk_show(struct seq_file *s, void *unused) list_for_each_entry(clk, &clocks, node) { char *state; - if (clk->mode == pmc_sys_mode) + if (clk->mode == pmc_sys_mode) { state = (scsr & clk->pmc_mask) ? "on" : "off"; - else if (clk->mode == pmc_periph_mode) - state = (pcsr & clk->pmc_mask) ? "on" : "off"; - else if (clk->mode == pmc_uckr_mode) + } else if (clk->mode == pmc_periph_mode) { + if (cpu_is_sama5d3()) { + u32 pmc_mask = 1 << (clk->pid % 32); + + if (clk->pid > 31) + state = (pcsr1 & pmc_mask) ? "on" : "off"; + else + state = (pcsr & pmc_mask) ? "on" : "off"; + } else { + state = (pcsr & clk->pmc_mask) ? "on" : "off"; + } + } else if (clk->mode == pmc_uckr_mode) { state = (uckr & clk->pmc_mask) ? "on" : "off"; - else if (clk->pmc_mask) + } else if (clk->pmc_mask) { state = (sr & clk->pmc_mask) ? "on" : "off"; - else if (clk == &clk32k || clk == &main_clk) + } else if (clk == &clk32k || clk == &main_clk) { state = "on"; - else + } else { state = ""; + } - seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n", + seq_printf(s, "%-10s users=%2d %-3s %9lu Hz %s\n", clk->name, clk->users, state, clk_get_rate(clk), clk->parent ? clk->parent->name : ""); } @@ -530,6 +568,9 @@ int __init clk_register(struct clk *clk) if (clk_is_peripheral(clk)) { if (!clk->parent) clk->parent = &mck; + if (cpu_is_sama5d3()) + clk->rate_hz = DIV_ROUND_UP(clk->parent->rate_hz, + 1 << clk->div); clk->mode = pmc_periph_mode; } else if (clk_is_sys(clk)) { @@ -555,7 +596,11 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) unsigned mul, div; div = reg & 0xff; - mul = (reg >> 16) & 0x7ff; + if (cpu_is_sama5d3()) + mul = AT91_PMC3_MUL_GET(reg); + else + mul = AT91_PMC_MUL_GET(reg); + if (div && mul) { freq /= div; freq *= mul + 1; @@ -706,12 +751,15 @@ static int __init at91_pmc_init(unsigned long main_clock) /* report if PLLA is more than mildly overclocked */ plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR)); - if (cpu_has_300M_plla()) { - if (plla.rate_hz > 300000000) + if (cpu_has_1056M_plla()) { + if (plla.rate_hz > 1056000000) pll_overclock = true; } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_300M_plla()) { + if (plla.rate_hz > 300000000) + pll_overclock = true; } else if (cpu_has_240M_plla()) { if (plla.rate_hz > 240000000) pll_overclock = true; @@ -872,6 +920,7 @@ int __init at91_clock_init(unsigned long main_clock) static int __init at91_clock_reset(void) { unsigned long pcdr = 0; + unsigned long pcdr1 = 0; unsigned long scdr = 0; struct clk *clk; @@ -879,8 +928,17 @@ static int __init at91_clock_reset(void) if (clk->users > 0) continue; - if (clk->mode == pmc_periph_mode) - pcdr |= clk->pmc_mask; + if (clk->mode == pmc_periph_mode) { + if (cpu_is_sama5d3()) { + u32 pmc_mask = 1 << (clk->pid % 32); + + if (clk->pid > 31) + pcdr1 |= pmc_mask; + else + pcdr |= pmc_mask; + } else + pcdr |= clk->pmc_mask; + } if (clk->mode == pmc_sys_mode) scdr |= clk->pmc_mask; @@ -888,8 +946,9 @@ static int __init at91_clock_reset(void) pr_debug("Clocks: disable unused %s\n", clk->name); } - at91_pmc_write(AT91_PMC_PCDR, pcdr); at91_pmc_write(AT91_PMC_SCDR, scdr); + if (cpu_is_sama5d3()) + at91_pmc_write(AT91_PMC_PCDR1, pcdr1); return 0; } diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h index c2e63e47dcbe..a98a39bbd883 100644 --- a/arch/arm/mach-at91/clock.h +++ b/arch/arm/mach-at91/clock.h @@ -20,7 +20,9 @@ struct clk { const char *name; /* unique clock name */ struct clk_lookup cl; unsigned long rate_hz; + unsigned div; /* parent clock divider */ struct clk *parent; + unsigned pid; /* peripheral ID */ u32 pmc_mask; void (*mode)(struct clk *, int); unsigned id:3; /* PCK0..4, or 32k/main/a/b */ diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index 0c6381516a5a..48f1228c611c 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -27,8 +27,6 @@ #define AT91_MAX_STATES 2 -static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device); - /* Actual code that puts the SoC in different idle states */ static int at91_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, @@ -47,7 +45,6 @@ static int at91_enter_idle(struct cpuidle_device *dev, static struct cpuidle_driver at91_idle_driver = { .name = "at91_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states[0] = ARM_CPUIDLE_WFI_STATE, .states[1] = { .enter = at91_enter_idle, @@ -61,20 +58,9 @@ static struct cpuidle_driver at91_idle_driver = { }; /* Initialize CPU idle by registering the idle states */ -static int at91_init_cpuidle(void) +static int __init at91_init_cpuidle(void) { - struct cpuidle_device *device; - - device = &per_cpu(at91_cpuidle_device, smp_processor_id()); - device->state_count = AT91_MAX_STATES; - - cpuidle_register_driver(&at91_idle_driver); - - if (cpuidle_register_device(device)) { - printk(KERN_ERR "at91_init_cpuidle: Failed registering\n"); - return -EIO; - } - return 0; + return cpuidle_register(&at91_idle_driver, NULL); } device_initcall(at91_init_cpuidle); diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index c5d7e1e9d757..a5afcf76550e 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -22,10 +22,9 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_address.h> -#include <asm/mach/irq.h> - #include <mach/hardware.h> #include <mach/at91_pio.h> diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h index 2aa0c5e13495..3b5948566e52 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -16,9 +16,6 @@ #ifndef AT91_DBGU_H #define AT91_DBGU_H -#define dbgu_readl(dbgu, field) \ - __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field) - #if !defined(CONFIG_ARCH_AT91X40) #define AT91_DBGU_CR (0x00) /* Control Register */ #define AT91_DBGU_MR (0x04) /* Mode Register */ diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h index 02fae9de746b..f8996c954131 100644 --- a/arch/arm/mach-at91/include/mach/at91_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91_matrix.h @@ -14,7 +14,7 @@ extern void __iomem *at91_matrix_base; __raw_readl(at91_matrix_base + field) #define at91_matrix_write(field, value) \ - __raw_writel(value, at91_matrix_base + field); + __raw_writel(value, at91_matrix_base + field) #else .extern at91_matrix_base diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index ea2c57a86ca6..31df12029c4e 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -75,6 +75,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ #define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff) +#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */ +#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f) #define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ #define AT91_PMC_USBDIV_1 (0 << 28) #define AT91_PMC_USBDIV_2 (1 << 28) @@ -167,11 +170,18 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ #define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ -#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */ +#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/ +#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */ +#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */ + +#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */ #define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ -#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */ -#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */ -#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV) +#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ +#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ +#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ +#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h index 969aac27109f..67fdbd13c3ed 100644 --- a/arch/arm/mach-at91/include/mach/at91_st.h +++ b/arch/arm/mach-at91/include/mach/at91_st.h @@ -23,7 +23,7 @@ extern void __iomem *at91_st_base; __raw_readl(at91_st_base + field) #define at91_st_write(field, value) \ - __raw_writel(value, at91_st_base + field); + __raw_writel(value, at91_st_base + field) #else .extern at91_st_base #endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index b6504c19d55c..0f3379fe645f 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -36,6 +36,8 @@ #define ARCH_ID_AT91M40807 0x14080745 #define ARCH_ID_AT91R40008 0x44000840 +#define ARCH_ID_SAMA5D3 0x8A5C07C0 + #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9G46 0x00000003 @@ -47,6 +49,11 @@ #define ARCH_EXID_AT91SAM9G25 0x00000003 #define ARCH_EXID_AT91SAM9X25 0x00000004 +#define ARCH_EXID_SAMA5D31 0x00444300 +#define ARCH_EXID_SAMA5D33 0x00414300 +#define ARCH_EXID_SAMA5D34 0x00414301 +#define ARCH_EXID_SAMA5D35 0x00584300 + #define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 @@ -75,6 +82,9 @@ enum at91_soc_type { /* SAM9N12 */ AT91_SOC_SAM9N12, + /* SAMA5D3 */ + AT91_SOC_SAMA5D3, + /* Unknown type */ AT91_SOC_NONE }; @@ -93,6 +103,10 @@ enum at91_soc_subtype { AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35, AT91_SOC_SAM9G25, AT91_SOC_SAM9X25, + /* SAMA5D3 */ + AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34, + AT91_SOC_SAMA5D35, + /* Unknown subtype */ AT91_SOC_SUBTYPE_NONE }; @@ -187,6 +201,12 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91sam9n12() (0) #endif +#ifdef CONFIG_SOC_SAMA5D3 +#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3) +#else +#define cpu_is_sama5d3() (0) +#endif + /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h new file mode 100644 index 000000000000..6dc81ee38048 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -0,0 +1,73 @@ +/* + * Chip-specific header file for the SAMA5D3 family + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Common definitions. + * Based on SAMA5D3 datasheet. + * + * Licensed under GPLv2 or later. + */ + +#ifndef SAMA5D3_H +#define SAMA5D3_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */ +#define AT91_ID_PIT 3 /* PIT */ +#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */ +#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */ +#define SAMA5D3_ID_PIOA 6 /* PIOA */ +#define SAMA5D3_ID_PIOB 7 /* PIOB */ +#define SAMA5D3_ID_PIOC 8 /* PIOC */ +#define SAMA5D3_ID_PIOD 9 /* PIOD */ +#define SAMA5D3_ID_PIOE 10 /* PIOE */ +#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */ +#define SAMA5D3_ID_USART0 12 /* USART0 */ +#define SAMA5D3_ID_USART1 13 /* USART1 */ +#define SAMA5D3_ID_USART2 14 /* USART2 */ +#define SAMA5D3_ID_USART3 15 /* USART3 */ +#define SAMA5D3_ID_UART0 16 /* UART 0 */ +#define SAMA5D3_ID_UART1 17 /* UART 1 */ +#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */ +#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */ +#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */ +#define SAMA5D3_ID_HSMCI0 21 /* MCI */ +#define SAMA5D3_ID_HSMCI1 22 /* MCI */ +#define SAMA5D3_ID_HSMCI2 23 /* MCI */ +#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */ +#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */ +#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */ +#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */ +#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */ +#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */ +#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */ +#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */ +#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */ +#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */ +#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */ +#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */ +#define SAMA5D3_ID_LCDC 36 /* LCD Controller */ +#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */ +#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */ +#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */ +#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */ +#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */ +#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */ +#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */ +#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */ +#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */ +#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */ + +/* + * Internal Memory + */ +#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */ + +#endif diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c new file mode 100644 index 000000000000..401279715ab1 --- /dev/null +++ b/arch/arm/mach-at91/sama5d3.c @@ -0,0 +1,377 @@ +/* + * Chip-specific setup code for the SAMA5D3 family + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> + +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/sama5d3.h> +#include <mach/at91_pmc.h> +#include <mach/cpu.h> + +#include "soc.h" +#include "generic.h" +#include "clock.h" +#include "sam9_smc.h" + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ + +static struct clk pioA_clk = { + .name = "pioA_clk", + .pid = SAMA5D3_ID_PIOA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioB_clk = { + .name = "pioB_clk", + .pid = SAMA5D3_ID_PIOB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioC_clk = { + .name = "pioC_clk", + .pid = SAMA5D3_ID_PIOC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioD_clk = { + .name = "pioD_clk", + .pid = SAMA5D3_ID_PIOD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioE_clk = { + .name = "pioE_clk", + .pid = SAMA5D3_ID_PIOE, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pid = SAMA5D3_ID_USART0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pid = SAMA5D3_ID_USART1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pid = SAMA5D3_ID_USART2, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk usart3_clk = { + .name = "usart3_clk", + .pid = SAMA5D3_ID_USART3, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk uart0_clk = { + .name = "uart0_clk", + .pid = SAMA5D3_ID_UART0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk uart1_clk = { + .name = "uart1_clk", + .pid = SAMA5D3_ID_UART1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk twi0_clk = { + .name = "twi0_clk", + .pid = SAMA5D3_ID_TWI0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk twi1_clk = { + .name = "twi1_clk", + .pid = SAMA5D3_ID_TWI1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk twi2_clk = { + .name = "twi2_clk", + .pid = SAMA5D3_ID_TWI2, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pid = SAMA5D3_ID_HSMCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pid = SAMA5D3_ID_HSMCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc2_clk = { + .name = "mci2_clk", + .pid = SAMA5D3_ID_HSMCI2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pid = SAMA5D3_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pid = SAMA5D3_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb0_clk = { + .name = "tcb0_clk", + .pid = SAMA5D3_ID_TC0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk tcb1_clk = { + .name = "tcb1_clk", + .pid = SAMA5D3_ID_TC1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pid = SAMA5D3_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 5000000, +}; +static struct clk dma0_clk = { + .name = "dma0_clk", + .pid = SAMA5D3_ID_DMA0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma1_clk = { + .name = "dma1_clk", + .pid = SAMA5D3_ID_DMA1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uhphs_clk = { + .name = "uhphs", + .pid = SAMA5D3_ID_UHPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pid = SAMA5D3_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +/* gmac only for sama5d33, sama5d34, sama5d35 */ +static struct clk macb0_clk = { + .name = "macb0_clk", + .pid = SAMA5D3_ID_GMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* emac only for sama5d31, sama5d35 */ +static struct clk macb1_clk = { + .name = "macb1_clk", + .pid = SAMA5D3_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* lcd only for sama5d31, sama5d33, sama5d34 */ +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pid = SAMA5D3_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* isi only for sama5d33, sama5d35 */ +static struct clk isi_clk = { + .name = "isi_clk", + .pid = SAMA5D3_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk can0_clk = { + .name = "can0_clk", + .pid = SAMA5D3_ID_CAN0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk can1_clk = { + .name = "can1_clk", + .pid = SAMA5D3_ID_CAN1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk ssc0_clk = { + .name = "ssc0_clk", + .pid = SAMA5D3_ID_SSC0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk ssc1_clk = { + .name = "ssc1_clk", + .pid = SAMA5D3_ID_SSC1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk sha_clk = { + .name = "sha_clk", + .pid = SAMA5D3_ID_SHA, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV8, +}; +static struct clk aes_clk = { + .name = "aes_clk", + .pid = SAMA5D3_ID_AES, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tdes_clk = { + .name = "tdes_clk", + .pid = SAMA5D3_ID_TDES, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioA_clk, + &pioB_clk, + &pioC_clk, + &pioD_clk, + &pioE_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &usart3_clk, + &uart0_clk, + &uart1_clk, + &twi0_clk, + &twi1_clk, + &twi2_clk, + &mmc0_clk, + &mmc1_clk, + &mmc2_clk, + &spi0_clk, + &spi1_clk, + &tcb0_clk, + &tcb1_clk, + &adc_clk, + &adc_op_clk, + &dma0_clk, + &dma1_clk, + &uhphs_clk, + &udphs_clk, + &macb0_clk, + &macb1_clk, + &lcdc_clk, + &isi_clk, + &can0_clk, + &can1_clk, + &ssc0_clk, + &ssc1_clk, + &sha_clk, + &aes_clk, + &tdes_clk, +}; + +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; + +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; + +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk), + CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk), + CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk), + CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk), + CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk), + CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk), + CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk), + CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk), + CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk), + CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk), + CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk), + CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk), + CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk), + CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk), + CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk), +}; + +static void __init sama5d3_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); +} + +/* -------------------------------------------------------------------- + * AT91SAM9x5 processor initialization + * -------------------------------------------------------------------- */ + +static void __init sama5d3_map_io(void) +{ + at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE); +} + +AT91_SOC_START(sama5d3) + .map_io = sama5d3_map_io, + .register_clocks = sama5d3_register_clocks, +AT91_SOC_END diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 4b678478cf95..e8491e77b1f7 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -151,6 +151,11 @@ static void __init soc_detect(u32 dbgu_base) at91_soc_initdata.type = AT91_SOC_SAM9N12; at91_boot_soc = at91sam9n12_soc; break; + + case ARCH_ID_SAMA5D3: + at91_soc_initdata.type = AT91_SOC_SAMA5D3; + at91_boot_soc = sama5d3_soc; + break; } /* at91sam9g10 */ @@ -206,6 +211,23 @@ static void __init soc_detect(u32 dbgu_base) break; } } + + if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_SAMA5D31: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D31; + break; + case ARCH_EXID_SAMA5D33: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D33; + break; + case ARCH_EXID_SAMA5D34: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D34; + break; + case ARCH_EXID_SAMA5D35: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D35; + break; + } + } } static const char *soc_name[] = { @@ -219,6 +241,7 @@ static const char *soc_name[] = { [AT91_SOC_SAM9RL] = "at91sam9rl", [AT91_SOC_SAM9X5] = "at91sam9x5", [AT91_SOC_SAM9N12] = "at91sam9n12", + [AT91_SOC_SAMA5D3] = "sama5d3", [AT91_SOC_NONE] = "Unknown" }; @@ -241,6 +264,10 @@ static const char *soc_subtype_name[] = { [AT91_SOC_SAM9X35] = "at91sam9x35", [AT91_SOC_SAM9G25] = "at91sam9g25", [AT91_SOC_SAM9X25] = "at91sam9x25", + [AT91_SOC_SAMA5D31] = "sama5d31", + [AT91_SOC_SAMA5D33] = "sama5d33", + [AT91_SOC_SAMA5D34] = "sama5d34", + [AT91_SOC_SAMA5D35] = "sama5d35", [AT91_SOC_SUBTYPE_NONE] = "Unknown" }; @@ -333,7 +360,7 @@ static void at91_dt_rstc(void) of_id = of_match_node(rstc_ids, np); if (!of_id) - panic("AT91: rtsc no restart function availlable\n"); + panic("AT91: rtsc no restart function available\n"); arm_pm_restart = of_id->data; @@ -353,7 +380,7 @@ static void at91_dt_ramc(void) np = of_find_matching_node(NULL, ramc_ids); if (!np) - panic("unable to find compatible ram conroller node in dtb\n"); + panic("unable to find compatible ram controller node in dtb\n"); at91_ramc_base[0] = of_iomap(np, 0); if (!at91_ramc_base[0]) @@ -403,7 +430,7 @@ static void at91_dt_shdwc(void) np = of_find_matching_node(NULL, shdwc_ids); if (!np) { - pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n"); + pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n"); return; } @@ -419,7 +446,7 @@ static void at91_dt_shdwc(void) if (!of_property_read_u32(np, "atmel,wakeup-counter", ®)) { if (reg > AT91_SHDW_CPTWK0_MAX) { - pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n", + pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n", reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX); reg = AT91_SHDW_CPTWK0_MAX; } diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 9c6d3d4f9a23..43a225f9e713 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -22,9 +22,10 @@ extern struct at91_init_soc at91sam9g45_soc; extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9n12_soc; +extern struct at91_init_soc sama5d3_soc; #define AT91_SOC_START(_name) \ -struct at91_init_soc __initdata at91##_name##_soc \ +struct at91_init_soc __initdata _name##_soc \ __used \ = { \ .builtin = 1, \ @@ -68,3 +69,7 @@ static inline int at91_soc_is_enabled(void) #if !defined(CONFIG_SOC_AT91SAM9N12) #define at91sam9n12_soc at91_boot_soc #endif + +#if !defined(CONFIG_SOC_SAMA5D3) +#define sama5d3_soc at91_boot_soc +#endif diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index bf02471d7e7c..f11289519c39 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -6,6 +6,7 @@ config ARCH_BCM select ARM_ERRATA_764369 if SMP select ARM_GIC select CPU_V7 + select CLKSRC_OF select GENERIC_CLOCKEVENTS select GENERIC_TIME select GPIO_BCM diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c index f0f9abafad29..259593540477 100644 --- a/arch/arm/mach-bcm/board_bcm.c +++ b/arch/arm/mach-bcm/board_bcm.c @@ -16,14 +16,11 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/irqchip.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -static void timer_init(void) -{ -} - static void __init board_init(void) { @@ -35,7 +32,7 @@ static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") .init_irq = irqchip_init, - .init_time = timer_init, + .init_time = clocksource_of_init, .init_machine = board_init, .dt_compat = bcm11351_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig new file mode 100644 index 000000000000..560045cafc34 --- /dev/null +++ b/arch/arm/mach-bcm2835/Kconfig @@ -0,0 +1,15 @@ +config ARCH_BCM2835 + bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_ERRATA_411920 + select ARM_TIMER_SP804 + select CLKDEV_LOOKUP + select CLKSRC_OF + select CPU_V6 + select GENERIC_CLOCKEVENTS + select PINCTRL + select PINCTRL_BCM2835 + help + This enables support for the Broadcom BCM2835 SoC. This SoC is + use in the Raspberry Pi, and Roku 2 devices. diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot deleted file mode 100644 index b3271754e9fd..000000000000 --- a/arch/arm/mach-bcm2835/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ -zreladdr-y := 0x00008000 diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index 6f5785985dd1..740fa9ebe249 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -23,8 +23,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/bcm2835_soc.h> - #define PM_RSTC 0x1c #define PM_RSTS 0x20 #define PM_WDOG 0x24 @@ -34,6 +32,10 @@ #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 #define PM_RSTS_HADWRH_SET 0x00000040 +#define BCM2835_PERIPH_PHYS 0x20000000 +#define BCM2835_PERIPH_VIRT 0xf0000000 +#define BCM2835_PERIPH_SIZE SZ_16M + static void __iomem *wdt_regs; /* diff --git a/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h b/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h deleted file mode 100644 index d4dfcf7a9cda..000000000000 --- a/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2012 Stephen Warren - * - * Derived from code: - * Copyright (C) 2010 Broadcom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_BCM2835_BCM2835_SOC_H__ -#define __MACH_BCM2835_BCM2835_SOC_H__ - -#include <asm/sizes.h> - -#define BCM2835_PERIPH_PHYS 0x20000000 -#define BCM2835_PERIPH_VIRT 0xf0000000 -#define BCM2835_PERIPH_SIZE SZ_16M -#define BCM2835_DEBUG_PHYS 0x20201000 -#define BCM2835_DEBUG_VIRT 0xf0201000 - -#endif diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-bcm2835/include/mach/gpio.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-bcm2835/include/mach/timex.h b/arch/arm/mach-bcm2835/include/mach/timex.h deleted file mode 100644 index 6d021e136ae3..000000000000 --- a/arch/arm/mach-bcm2835/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * BCM2835 system clock frequency - * - * Copyright (C) 2010 Broadcom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE (1000000) - -#endif diff --git a/arch/arm/mach-bcm2835/include/mach/uncompress.h b/arch/arm/mach-bcm2835/include/mach/uncompress.h deleted file mode 100644 index bf86dca3bf71..000000000000 --- a/arch/arm/mach-bcm2835/include/mach/uncompress.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 2010 Broadcom - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/io.h> -#include <linux/amba/serial.h> -#include <mach/bcm2835_soc.h> - -#define UART0_BASE BCM2835_DEBUG_PHYS - -#define BCM2835_UART_DR IOMEM(UART0_BASE + UART01x_DR) -#define BCM2835_UART_FR IOMEM(UART0_BASE + UART01x_FR) -#define BCM2835_UART_CR IOMEM(UART0_BASE + UART011_CR) - -static inline void putc(int c) -{ - while (__raw_readl(BCM2835_UART_FR) & UART01x_FR_TXFF) - barrier(); - - __raw_writel(c, BCM2835_UART_DR); -} - -static inline void flush(void) -{ - int fr; - - do { - fr = __raw_readl(BCM2835_UART_FR); - barrier(); - } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE); -} - -#define arch_decomp_setup() diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 9ebfcc46feb1..dbf0df8bb0ac 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,8 +1,20 @@ +config ARCH_CNS3XXX + bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 + select ARM_GIC + select CPU_V6K + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI + help + Support for Cavium Networks CNS3XXX platform. + menu "CNS3XXX platform type" depends on ARCH_CNS3XXX config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" + depends on ATAGS help Include support for the Cavium Networks CNS3420 MPCore Platform Baseboard. diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile index 11033f1c2e23..a1ff10848698 100644 --- a/arch/arm/mach-cns3xxx/Makefile +++ b/arch/arm/mach-cns3xxx/Makefile @@ -1,3 +1,5 @@ -obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o devices.o -obj-$(CONFIG_PCI) += pcie.o -obj-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o +obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o +cns3xxx-y += core.o pm.o +cns3xxx-$(CONFIG_ATAGS) += devices.o +cns3xxx-$(CONFIG_PCI) += pcie.o +cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index a71867e1d8d6..ce096d678aa4 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -31,9 +31,8 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/cns3xxx.h> -#include <mach/irqs.h> -#include <mach/pm.h> +#include "cns3xxx.h" +#include "pm.h" #include "core.h" #include "devices.h" @@ -247,6 +246,7 @@ static void __init cns3420_map_io(void) MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") .atag_offset = 0x100, + .nr_irqs = NR_IRQS_CNS3XXX, .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h index 191c8e57f289..a0f5b60662ae 100644 --- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/cns3xxx.h @@ -20,22 +20,16 @@ #define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */ #define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */ -#define CNS3XXX_SWITCH_BASE_VIRT 0xFFF00000 #define CNS3XXX_PPE_BASE 0x70001000 /* HANT */ -#define CNS3XXX_PPE_BASE_VIRT 0xFFF50000 #define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */ -#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT 0xFFF60000 #define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */ -#define CNS3XXX_SSP_BASE_VIRT 0xFFF01000 #define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */ -#define CNS3XXX_DMC_BASE_VIRT 0xFFF02000 #define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */ -#define CNS3XXX_SMC_BASE_VIRT 0xFFF03000 #define SMC_MEMC_STATUS_OFFSET 0x000 #define SMC_MEMIF_CFG_OFFSET 0x004 @@ -74,13 +68,10 @@ #define SMC_PCELL_ID_3_OFFSET 0xFFC #define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */ -#define CNS3XXX_GPIOA_BASE_VIRT 0xFFF04000 #define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */ -#define CNS3XXX_GPIOB_BASE_VIRT 0xFFF05000 #define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */ -#define CNS3XXX_RTC_BASE_VIRT 0xFFF06000 #define RTC_SEC_OFFSET 0x00 #define RTC_MIN_OFFSET 0x04 @@ -94,10 +85,10 @@ #define RTC_INTR_STS_OFFSET 0x34 #define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */ -#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */ +#define CNS3XXX_MISC_BASE_VIRT 0xFB000000 /* Misc Control */ #define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */ -#define CNS3XXX_PM_BASE_VIRT 0xFFF08000 +#define CNS3XXX_PM_BASE_VIRT 0xFB001000 #define PM_CLK_GATE_OFFSET 0x00 #define PM_SOFT_RST_OFFSET 0x04 @@ -109,28 +100,22 @@ #define PM_PLL_HM_PD_OFFSET 0x1C #define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */ -#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000 +#define CNS3XXX_UART0_BASE_VIRT 0xFB002000 #define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */ -#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000 #define CNS3XXX_UART2_BASE 0x78800000 /* UART 2 */ -#define CNS3XXX_UART2_BASE_VIRT 0xFFF0B000 #define CNS3XXX_DMAC_BASE 0x79000000 /* Generic DMA Control */ -#define CNS3XXX_DMAC_BASE_VIRT 0xFFF0D000 #define CNS3XXX_CORESIGHT_BASE 0x7A000000 /* CoreSight */ -#define CNS3XXX_CORESIGHT_BASE_VIRT 0xFFF0E000 #define CNS3XXX_CRYPTO_BASE 0x7B000000 /* Crypto */ -#define CNS3XXX_CRYPTO_BASE_VIRT 0xFFF0F000 #define CNS3XXX_I2S_BASE 0x7C000000 /* I2S */ -#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000 #define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */ -#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800 +#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000 #define TIMER1_COUNTER_OFFSET 0x00 #define TIMER1_AUTO_RELOAD_OFFSET 0x04 @@ -150,42 +135,31 @@ #define TIMER_FREERUN_CONTROL_OFFSET 0x44 #define CNS3XXX_HCIE_BASE 0x7D000000 /* HCIE Control */ -#define CNS3XXX_HCIE_BASE_VIRT 0xFFF30000 #define CNS3XXX_RAID_BASE 0x7E000000 /* RAID Control */ -#define CNS3XXX_RAID_BASE_VIRT 0xFFF12000 #define CNS3XXX_AXI_IXC_BASE 0x7F000000 /* AXI IXC */ -#define CNS3XXX_AXI_IXC_BASE_VIRT 0xFFF13000 #define CNS3XXX_CLCD_BASE 0x80000000 /* LCD Control */ -#define CNS3XXX_CLCD_BASE_VIRT 0xFFF14000 #define CNS3XXX_USBOTG_BASE 0x81000000 /* USB OTG Control */ -#define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000 #define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */ #define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */ #define CNS3XXX_SATA2_SIZE SZ_16M -#define CNS3XXX_SATA2_BASE_VIRT 0xFFF17000 #define CNS3XXX_CAMERA_BASE 0x84000000 /* Camera Interface */ -#define CNS3XXX_CAMERA_BASE_VIRT 0xFFF18000 #define CNS3XXX_SDIO_BASE 0x85000000 /* SDIO */ -#define CNS3XXX_SDIO_BASE_VIRT 0xFFF19000 #define CNS3XXX_I2S_TDM_BASE 0x86000000 /* I2S TDM */ -#define CNS3XXX_I2S_TDM_BASE_VIRT 0xFFF1A000 #define CNS3XXX_2DG_BASE 0x87000000 /* 2D Graphic Control */ -#define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000 #define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */ #define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ -#define CNS3XXX_L2C_BASE_VIRT 0xFFF27000 #define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */ #define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000 @@ -227,19 +201,18 @@ * Testchip peripheral and fpga gic regions */ #define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */ -#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000 +#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFB004000 #define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */ -#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100 +#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100) #define CNS3XXX_TC11MP_TWD_BASE 0x90000600 -#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600 +#define CNS3XXX_TC11MP_TWD_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600) #define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */ -#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000 +#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000) #define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */ -#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000 /* * Misc block @@ -553,6 +526,8 @@ int cns3xxx_cpu_clock(void); /* * ARM11 MPCore interrupt sources (primary GIC) */ +#define IRQ_TC11MP_GIC_START 32 + #define IRQ_CNS3XXX_PMU (IRQ_TC11MP_GIC_START + 0) #define IRQ_CNS3XXX_SDIO (IRQ_TC11MP_GIC_START + 1) #define IRQ_CNS3XXX_L2CC (IRQ_TC11MP_GIC_START + 2) @@ -624,9 +599,4 @@ int cns3xxx_cpu_clock(void); #define NR_IRQS_CNS3XXX (IRQ_TC11MP_GIC_START + 64) -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_CNS3XXX -#endif - #endif /* __MACH_BOARD_CNS3XXX_H */ diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index e698f26cc0cb..e38b279f402c 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -13,28 +13,24 @@ #include <linux/clockchips.h> #include <linux/io.h> #include <linux/irqchip/arm-gic.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> +#include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/cns3xxx.h> +#include "cns3xxx.h" #include "core.h" +#include "pm.h" static struct map_desc cns3xxx_io_desc[] __initdata = { { - .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE), - .length = SZ_4K, + .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE), + .length = SZ_8K, .type = MT_DEVICE, }, { .virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT, @@ -42,16 +38,6 @@ static struct map_desc cns3xxx_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = CNS3XXX_GPIOA_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_GPIOB_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = CNS3XXX_MISC_BASE_VIRT, .pfn = __phys_to_pfn(CNS3XXX_MISC_BASE), .length = SZ_4K, @@ -276,3 +262,116 @@ void __init cns3xxx_l2x0_init(void) } #endif /* CONFIG_CACHE_L2X0 */ + +static int csn3xxx_usb_power_on(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + * + * Set USB AHB INCR length to 16 + */ + if (atomic_inc_return(&usb_pwr_ref) == 1) { + cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); + cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); + cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); + __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), + MISC_CHIP_CONFIG_REG); + } + + return 0; +} + +static void csn3xxx_usb_power_off(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + */ + if (atomic_dec_return(&usb_pwr_ref) == 0) + cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); +} + +static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = { + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + +static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = { + .num_ports = 1, + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + +static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = { + { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata }, + { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata }, + { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL }, + { "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL }, + {}, +}; + +static void __init cns3xxx_init(void) +{ + struct device_node *dn; + + cns3xxx_l2x0_init(); + + dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci"); + if (of_device_is_available(dn)) { + u32 tmp; + + tmp = __raw_readl(MISC_SATA_POWER_MODE); + tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */ + tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */ + __raw_writel(tmp, MISC_SATA_POWER_MODE); + + /* Enable SATA PHY */ + cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0); + cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1); + + /* Enable SATA Clock */ + cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA); + + /* De-Asscer SATA Reset */ + cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA)); + } + + dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci"); + if (of_device_is_available(dn)) { + u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014); + u32 gpioa_pins = __raw_readl(gpioa); + + /* MMC/SD pins share with GPIOA */ + gpioa_pins |= 0x1fff0004; + __raw_writel(gpioa_pins, gpioa); + + cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO)); + cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO)); + } + + pm_power_off = cns3xxx_power_off; + + of_platform_populate(NULL, of_default_bus_match_table, + cns3xxx_auxdata, NULL); +} + +static const char *cns3xxx_dt_compat[] __initdata = { + "cavium,cns3410", + "cavium,cns3420", + NULL, +}; + +DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx") + .dt_compat = cns3xxx_dt_compat, + .nr_irqs = NR_IRQS_CNS3XXX, + .map_io = cns3xxx_map_io, + .init_irq = cns3xxx_init_irq, + .init_time = cns3xxx_timer_init, + .init_machine = cns3xxx_init, + .restart = cns3xxx_restart, +MACHINE_END diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c index 1e40c99b015f..7da78a2451f1 100644 --- a/arch/arm/mach-cns3xxx/devices.c +++ b/arch/arm/mach-cns3xxx/devices.c @@ -16,9 +16,8 @@ #include <linux/compiler.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <mach/cns3xxx.h> -#include <mach/irqs.h> -#include <mach/pm.h> +#include "cns3xxx.h" +#include "pm.h" #include "core.h" #include "devices.h" diff --git a/arch/arm/mach-cns3xxx/include/mach/irqs.h b/arch/arm/mach-cns3xxx/include/mach/irqs.h deleted file mode 100644 index 2ab96f8085c8..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/irqs.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright 2000 Deep Blue Solutions Ltd. - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 -#define IRQ_TC11MP_GIC_START 32 - -#include <mach/cns3xxx.h> - -#ifndef NR_IRQS -#error "NR_IRQS not defined by the board-specific files" -#endif - -#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/timex.h b/arch/arm/mach-cns3xxx/include/mach/timex.h deleted file mode 100644 index 1fd04217cacb..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Cavium Networks architecture timex specifications - * - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h deleted file mode 100644 index 7a030b99df84..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#include <asm/mach-types.h> -#include <mach/cns3xxx.h> - -#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) -#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) -#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) -#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) - -/* - * Return the UART base address - */ -static inline unsigned long get_uart_base(void) -{ - if (machine_is_cns3420vb()) - return CNS3XXX_UART0_BASE; - else - return 0; -} - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 5)) - barrier(); - - AMBA_UART_DR(base) = c; -} - -static inline void flush(void) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 311328314163..c7b204bff386 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -20,7 +20,7 @@ #include <linux/interrupt.h> #include <linux/ptrace.h> #include <asm/mach/map.h> -#include <mach/cns3xxx.h> +#include "cns3xxx.h" #include "core.h" enum cns3xxx_access_type { diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c index 36458080332a..79e3d47aad65 100644 --- a/arch/arm/mach-cns3xxx/pm.c +++ b/arch/arm/mach-cns3xxx/pm.c @@ -11,8 +11,8 @@ #include <linux/io.h> #include <linux/delay.h> #include <linux/atomic.h> -#include <mach/cns3xxx.h> -#include <mach/pm.h> +#include "cns3xxx.h" +#include "pm.h" #include "core.h" void cns3xxx_pwr_clk_en(unsigned int block) diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/pm.h index c2588cc991d1..c2588cc991d1 100644 --- a/arch/arm/mach-cns3xxx/include/mach/pm.h +++ b/arch/arm/mach-cns3xxx/pm.h diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index fb5c1aa98a63..dd1ffccc75e9 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o # Power Management -obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o obj-$(CONFIG_HAVE_CLK) += pm_domain.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 6da25eebf911..12e6f756361d 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -246,7 +246,6 @@ static struct davinci_mmc_config da830_evm_mmc_config = { .wires = 8, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_2, }; static inline void da830_evm_init_mmc(void) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index c2dfe06563df..dcc8710936a5 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -802,7 +802,6 @@ static struct davinci_mmc_config da850_mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_2, }; static const short da850_evm_mmcsd0_pins[] __initconst = { @@ -1372,7 +1371,6 @@ static struct davinci_mmc_config da850_wl12xx_mmc_config = { .max_freq = 25000000, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD, - .version = MMC_CTLR_VERSION_2, }; static const short da850_wl12xx_pins[] __initconst = { diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 147b8e1a4407..c2a0a67d09e0 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -242,6 +242,73 @@ static struct vpfe_config vpfe_cfg = { .ccdc = "DM355 CCDC", }; +/* venc standards timings */ +static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = { + { + .name = "ntsc", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_NTSC, + .interlaced = 1, + .xres = 720, + .yres = 480, + .aspect = {11, 10}, + .fps = {30000, 1001}, + .left_margin = 0x79, + .upper_margin = 0x10, + }, + { + .name = "pal", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_PAL, + .interlaced = 1, + .xres = 720, + .yres = 576, + .aspect = {54, 59}, + .fps = {25, 1}, + .left_margin = 0x7E, + .upper_margin = 0x16 + }, +}; + +#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +/* + * The outputs available from VPBE + ecnoders. Keep the + * the order same as that of encoders. First those from venc followed by that + * from encoders. Index in the output refers to index on a particular encoder. + * Driver uses this index to pass it to encoder when it supports more than + * one output. Application uses index of the array to set an output. + */ +static struct vpbe_output dm355evm_vpbe_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = VENC_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + .subdev_name = DM355_VPBE_VENC_SUBDEV_NAME, + .default_mode = "ntsc", + .num_modes = ARRAY_SIZE(dm355evm_enc_preset_timing), + .modes = dm355evm_enc_preset_timing, + .if_params = V4L2_MBUS_FMT_FIXED, + }, +}; + +static struct vpbe_config dm355evm_display_cfg = { + .module_name = "dm355-vpbe-display", + .i2c_adapter_id = 1, + .osd = { + .module_name = DM355_VPBE_OSD_SUBDEV_NAME, + }, + .venc = { + .module_name = DM355_VPBE_VENC_SUBDEV_NAME, + }, + .num_outputs = ARRAY_SIZE(dm355evm_vpbe_outputs), + .outputs = dm355evm_vpbe_outputs, +}; + static struct platform_device *davinci_evm_devices[] __initdata = { &dm355evm_dm9000, &davinci_nand_device, @@ -253,8 +320,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm355_evm_map_io(void) { - /* setup input configuration for VPFE input devices */ - dm355_set_vpfe_config(&vpfe_cfg); dm355_init(); } @@ -280,7 +345,6 @@ static struct davinci_mmc_config dm355evm_mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_1, }; /* Don't connect anything to J10 unless you're only using USB host @@ -344,6 +408,8 @@ static __init void dm355_evm_init(void) davinci_setup_mmc(0, &dm355evm_mmc_config); davinci_setup_mmc(1, &dm355evm_mmc_config); + dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg); + dm355_init_spi0(BIT(0), dm355_evm_spi_info, ARRAY_SIZE(dm355_evm_spi_info)); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index c2d4958a0cb6..fd38c8d22e3c 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -27,6 +27,7 @@ #include <linux/input.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> +#include <linux/v4l2-dv-timings.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +40,7 @@ #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/keyscan-davinci.h> +#include <media/ths7303.h> #include <media/tvp514x.h> #include "davinci.h" @@ -253,7 +255,6 @@ static struct davinci_mmc_config dm365evm_mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_2, }; static void dm365evm_emac_configure(void) @@ -374,6 +375,166 @@ static struct vpfe_config vpfe_cfg = { .ccdc = "ISIF", }; +/* venc standards timings */ +static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = { + { + .name = "ntsc", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_NTSC, + .interlaced = 1, + .xres = 720, + .yres = 480, + .aspect = {11, 10}, + .fps = {30000, 1001}, + .left_margin = 0x79, + .upper_margin = 0x10, + }, + { + .name = "pal", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_PAL, + .interlaced = 1, + .xres = 720, + .yres = 576, + .aspect = {54, 59}, + .fps = {25, 1}, + .left_margin = 0x7E, + .upper_margin = 0x16, + }, +}; + +/* venc dv timings */ +static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = { + { + .name = "480p59_94", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, + .interlaced = 0, + .xres = 720, + .yres = 480, + .aspect = {1, 1}, + .fps = {5994, 100}, + .left_margin = 0x8F, + .upper_margin = 0x2D, + }, + { + .name = "576p50", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X576P50, + .interlaced = 0, + .xres = 720, + .yres = 576, + .aspect = {1, 1}, + .fps = {50, 1}, + .left_margin = 0x8C, + .upper_margin = 0x36, + }, + { + .name = "720p60", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_1280X720P60, + .interlaced = 0, + .xres = 1280, + .yres = 720, + .aspect = {1, 1}, + .fps = {60, 1}, + .left_margin = 0x117, + .right_margin = 70, + .upper_margin = 38, + .lower_margin = 3, + .hsync_len = 80, + .vsync_len = 5, + }, + { + .name = "1080i60", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_1920X1080I60, + .interlaced = 1, + .xres = 1920, + .yres = 1080, + .aspect = {1, 1}, + .fps = {30, 1}, + .left_margin = 0xc9, + .right_margin = 80, + .upper_margin = 30, + .lower_margin = 3, + .hsync_len = 88, + .vsync_len = 5, + }, +}; + +#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +/* + * The outputs available from VPBE + ecnoders. Keep the + * the order same as that of encoders. First those from venc followed by that + * from encoders. Index in the output refers to index on a particular + * encoder.Driver uses this index to pass it to encoder when it supports more + * than one output. Application uses index of the array to set an output. + */ +static struct vpbe_output dm365evm_vpbe_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = VENC_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME, + .default_mode = "ntsc", + .num_modes = ARRAY_SIZE(dm365evm_enc_std_timing), + .modes = dm365evm_enc_std_timing, + .if_params = V4L2_MBUS_FMT_FIXED, + }, + { + .output = { + .index = 1, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, + }, + .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME, + .default_mode = "480p59_94", + .num_modes = ARRAY_SIZE(dm365evm_enc_preset_timing), + .modes = dm365evm_enc_preset_timing, + .if_params = V4L2_MBUS_FMT_FIXED, + }, +}; + +/* + * Amplifiers on the board + */ +struct ths7303_platform_data ths7303_pdata = { + .ch_1 = 3, + .ch_2 = 3, + .ch_3 = 3, + .init_enable = 1, +}; + +static struct amp_config_info vpbe_amp = { + .module_name = "ths7303", + .is_i2c = 1, + .board_info = { + I2C_BOARD_INFO("ths7303", 0x2c), + .platform_data = &ths7303_pdata, + } +}; + +static struct vpbe_config dm365evm_display_cfg = { + .module_name = "dm365-vpbe-display", + .i2c_adapter_id = 1, + .amp = &vpbe_amp, + .osd = { + .module_name = DM365_VPBE_OSD_SUBDEV_NAME, + }, + .venc = { + .module_name = DM365_VPBE_VENC_SUBDEV_NAME, + }, + .num_outputs = ARRAY_SIZE(dm365evm_vpbe_outputs), + .outputs = dm365evm_vpbe_outputs, +}; + static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); @@ -564,8 +725,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm365_evm_map_io(void) { - /* setup input configuration for VPFE input devices */ - dm365_set_vpfe_config(&vpfe_cfg); dm365_init(); } @@ -597,6 +756,8 @@ static __init void dm365_evm_init(void) davinci_setup_mmc(0, &dm365evm_mmc_config); + dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg); + /* maybe setup mmc1/etc ... _after_ mmc0 */ evm_init_cpld(); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 71735e7797cc..e62108fd7926 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -570,7 +570,6 @@ static struct davinci_mmc_config dm6446evm_mmc_config = { .get_cd = dm6444evm_mmc_get_cd, .get_ro = dm6444evm_mmc_get_ro, .wires = 4, - .version = MMC_CTLR_VERSION_1 }; static struct i2c_board_info __initdata i2c_info[] = { @@ -622,7 +621,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { { .name = "ntsc", .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_525_60, + .std_id = V4L2_STD_NTSC, .interlaced = 1, .xres = 720, .yres = 480, @@ -634,7 +633,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { { .name = "pal", .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_625_50, + .std_id = V4L2_STD_PAL, .interlaced = 1, .xres = 720, .yres = 576, @@ -649,7 +648,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { { .name = "480p59_94", - .timings_type = VPBE_ENC_CUSTOM_TIMINGS, + .timings_type = VPBE_ENC_DV_TIMINGS, .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, .interlaced = 0, .xres = 720, @@ -661,7 +660,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { }, { .name = "576p50", - .timings_type = VPBE_ENC_CUSTOM_TIMINGS, + .timings_type = VPBE_ENC_DV_TIMINGS, .dv_timings = V4L2_DV_BT_CEA_720X576P50, .interlaced = 0, .xres = 720, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index de7adff324dc..fc4871ac1c2c 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -514,7 +514,7 @@ static const struct vpif_output dm6467_ch0_outputs[] = { .index = 1, .name = "Component", .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, }, .subdev_name = "adv7343", .output_route = ADV7343_COMPONENT_ID, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 1c98107527fa..b70e83c03bed 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -164,7 +164,6 @@ static void __init davinci_ntosd2_map_io(void) static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, - .version = MMC_CTLR_VERSION_1 }; diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 5a2bd44da54d..328dbd8a37f5 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -136,7 +136,6 @@ static struct davinci_mmc_config da850_mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_2, }; static __init void omapl138_hawk_mmc_init(void) diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index 4f416023d4e2..ba798370fc96 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -85,7 +85,6 @@ static struct davinci_mmc_config mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_1, }; static const short sdio1_pins[] __initconst = { diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index d458558ee84a..dc9a470ff9c5 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -35,19 +35,26 @@ static void __clk_enable(struct clk *clk) { if (clk->parent) __clk_enable(clk->parent); - if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) - davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, - true, clk->flags); + if (clk->usecount++ == 0) { + if (clk->flags & CLK_PSC) + davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, + true, clk->flags); + else if (clk->clk_enable) + clk->clk_enable(clk); + } } static void __clk_disable(struct clk *clk) { if (WARN_ON(clk->usecount == 0)) return; - if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) && - (clk->flags & CLK_PSC)) - davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, - false, clk->flags); + if (--clk->usecount == 0) { + if (!(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC)) + davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, + false, clk->flags); + else if (clk->clk_disable) + clk->clk_disable(clk); + } if (clk->parent) __clk_disable(clk->parent); } diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 8694b395fc92..1e4e836173a1 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -104,6 +104,8 @@ struct clk { int (*set_rate) (struct clk *clk, unsigned long rate); int (*round_rate) (struct clk *clk, unsigned long rate); int (*reset) (struct clk *clk, bool reset); + void (*clk_enable) (struct clk *clk); + void (*clk_disable) (struct clk *clk); }; /* Clock flags: SoC-specific flags start at BIT(16) */ diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c deleted file mode 100644 index 4729eaab0f40..000000000000 --- a/arch/arm/mach-davinci/cpufreq.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * CPU frequency scaling for DaVinci - * - * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows: - * - * Copyright (C) 2005 Nokia Corporation - * Written by Tony Lindgren <tony@atomide.com> - * - * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Updated to support OMAP3 - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/types.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/export.h> - -#include <mach/hardware.h> -#include <mach/cpufreq.h> -#include <mach/common.h> - -#include "clock.h" - -struct davinci_cpufreq { - struct device *dev; - struct clk *armclk; - struct clk *asyncclk; - unsigned long asyncrate; -}; -static struct davinci_cpufreq cpufreq; - -static int davinci_verify_speed(struct cpufreq_policy *policy) -{ - struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; - struct cpufreq_frequency_table *freq_table = pdata->freq_table; - struct clk *armclk = cpufreq.armclk; - - if (freq_table) - return cpufreq_frequency_table_verify(policy, freq_table); - - if (policy->cpu) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000; - policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000; - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static unsigned int davinci_getspeed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpufreq.armclk) / 1000; -} - -static int davinci_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - int ret = 0; - unsigned int idx; - struct cpufreq_freqs freqs; - struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; - struct clk *armclk = cpufreq.armclk; - - /* - * Ensure desired rate is within allowed range. Some govenors - * (ondemand) will just pass target_freq=0 to get the minimum. - */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; - - freqs.old = davinci_getspeed(0); - freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000; - freqs.cpu = 0; - - if (freqs.old == freqs.new) - return ret; - - dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); - - ret = cpufreq_frequency_table_target(policy, pdata->freq_table, - freqs.new, relation, &idx); - if (ret) - return -EINVAL; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* if moving to higher frequency, up the voltage beforehand */ - if (pdata->set_voltage && freqs.new > freqs.old) { - ret = pdata->set_voltage(idx); - if (ret) - goto out; - } - - ret = clk_set_rate(armclk, idx); - if (ret) - goto out; - - if (cpufreq.asyncclk) { - ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate); - if (ret) - goto out; - } - - /* if moving to lower freq, lower the voltage after lowering freq */ - if (pdata->set_voltage && freqs.new < freqs.old) - pdata->set_voltage(idx); - -out: - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static int davinci_cpu_init(struct cpufreq_policy *policy) -{ - int result = 0; - struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; - struct cpufreq_frequency_table *freq_table = pdata->freq_table; - - if (policy->cpu != 0) - return -EINVAL; - - /* Finish platform specific initialization */ - if (pdata->init) { - result = pdata->init(); - if (result) - return result; - } - - policy->cur = policy->min = policy->max = davinci_getspeed(0); - - if (freq_table) { - result = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (!result) - cpufreq_frequency_table_get_attr(freq_table, - policy->cpu); - } else { - policy->cpuinfo.min_freq = policy->min; - policy->cpuinfo.max_freq = policy->max; - } - - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->cur = davinci_getspeed(0); - - /* - * Time measurement across the target() function yields ~1500-1800us - * time taken with no drivers on notification list. - * Setting the latency to 2000 us to accommodate addition of drivers - * to pre/post change notification list. - */ - policy->cpuinfo.transition_latency = 2000 * 1000; - return 0; -} - -static int davinci_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *davinci_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver davinci_driver = { - .flags = CPUFREQ_STICKY, - .verify = davinci_verify_speed, - .target = davinci_target, - .get = davinci_getspeed, - .init = davinci_cpu_init, - .exit = davinci_cpu_exit, - .name = "davinci", - .attr = davinci_cpufreq_attr, -}; - -static int __init davinci_cpufreq_probe(struct platform_device *pdev) -{ - struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; - struct clk *asyncclk; - - if (!pdata) - return -EINVAL; - if (!pdata->freq_table) - return -EINVAL; - - cpufreq.dev = &pdev->dev; - - cpufreq.armclk = clk_get(NULL, "arm"); - if (IS_ERR(cpufreq.armclk)) { - dev_err(cpufreq.dev, "Unable to get ARM clock\n"); - return PTR_ERR(cpufreq.armclk); - } - - asyncclk = clk_get(cpufreq.dev, "async"); - if (!IS_ERR(asyncclk)) { - cpufreq.asyncclk = asyncclk; - cpufreq.asyncrate = clk_get_rate(asyncclk); - } - - return cpufreq_register_driver(&davinci_driver); -} - -static int __exit davinci_cpufreq_remove(struct platform_device *pdev) -{ - clk_put(cpufreq.armclk); - - if (cpufreq.asyncclk) - clk_put(cpufreq.asyncclk); - - return cpufreq_unregister_driver(&davinci_driver); -} - -static struct platform_driver davinci_cpufreq_driver = { - .driver = { - .name = "cpufreq-davinci", - .owner = THIS_MODULE, - }, - .remove = __exit_p(davinci_cpufreq_remove), -}; - -int __init davinci_cpufreq_init(void) -{ - return platform_driver_probe(&davinci_cpufreq_driver, - davinci_cpufreq_probe); -} - diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 5ac9e9384b15..36aef3a7dedb 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -25,7 +25,6 @@ #define DAVINCI_CPUIDLE_MAX_STATES 2 -static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); static void __iomem *ddr2_reg_base; static bool ddr2_pdown; @@ -50,14 +49,10 @@ static void davinci_save_ddr_power(int enter, bool pdown) /* Actual code that puts the SoC in different idle states */ static int davinci_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) + struct cpuidle_driver *drv, int index) { davinci_save_ddr_power(1, ddr2_pdown); - - index = cpuidle_wrap_enter(dev, drv, index, - arm_cpuidle_simple_enter); - + cpu_do_idle(); davinci_save_ddr_power(0, ddr2_pdown); return index; @@ -66,7 +61,6 @@ static int davinci_enter_idle(struct cpuidle_device *dev, static struct cpuidle_driver davinci_idle_driver = { .name = "cpuidle-davinci", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states[0] = ARM_CPUIDLE_WFI_STATE, .states[1] = { .enter = davinci_enter_idle, @@ -81,12 +75,8 @@ static struct cpuidle_driver davinci_idle_driver = { static int __init davinci_cpuidle_probe(struct platform_device *pdev) { - int ret; - struct cpuidle_device *device; struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; - device = &per_cpu(davinci_cpuidle_device, smp_processor_id()); - if (!pdata) { dev_err(&pdev->dev, "cannot get platform data\n"); return -ENOENT; @@ -96,20 +86,7 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) ddr2_pdown = pdata->ddr2_pdown; - ret = cpuidle_register_driver(&davinci_idle_driver); - if (ret) { - dev_err(&pdev->dev, "failed to register driver\n"); - return ret; - } - - ret = cpuidle_register_device(device); - if (ret) { - dev_err(&pdev->dev, "failed to register device\n"); - cpuidle_unregister_driver(&davinci_idle_driver); - return ret; - } - - return 0; + return cpuidle_register(&davinci_idle_driver, NULL); } static struct platform_driver davinci_cpuidle_driver = { diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 678a54a64dae..abbaf0270be6 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -394,7 +394,7 @@ static struct clk_lookup da830_clks[] = { CLK(NULL, "tpcc", &tpcc_clk), CLK(NULL, "tptc0", &tptc0_clk), CLK(NULL, "tptc1", &tptc1_clk), - CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK("da830-mmc.0", NULL, &mmcsd_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 0c4a26ddebba..4d6933848abf 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -383,6 +383,49 @@ static struct clk dsp_clk = { .flags = PSC_LRST | PSC_FORCE, }; +static struct clk ehrpwm_clk = { + .name = "ehrpwm", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_PWM, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, +}; + +#define DA8XX_EHRPWM_TBCLKSYNC BIT(12) + +static void ehrpwm_tblck_enable(struct clk *clk) +{ + u32 val; + + val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); + val |= DA8XX_EHRPWM_TBCLKSYNC; + writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); +} + +static void ehrpwm_tblck_disable(struct clk *clk) +{ + u32 val; + + val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); + val &= ~DA8XX_EHRPWM_TBCLKSYNC; + writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); +} + +static struct clk ehrpwm_tbclk = { + .name = "ehrpwm_tbclk", + .parent = &ehrpwm_clk, + .clk_enable = ehrpwm_tblck_enable, + .clk_disable = ehrpwm_tblck_disable, +}; + +static struct clk ecap_clk = { + .name = "ecap", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_ECAP, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, +}; + static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -420,8 +463,8 @@ static struct clk_lookup da850_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), CLK("da8xx_lcdc.0", "fck", &lcdc_clk), - CLK("davinci_mmc.0", NULL, &mmcsd0_clk), - CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK("da830-mmc.0", NULL, &mmcsd0_clk), + CLK("da830-mmc.1", NULL, &mmcsd1_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, "usb11", &usb11_clk), CLK(NULL, "usb20", &usb20_clk), @@ -430,6 +473,9 @@ static struct clk_lookup da850_clks[] = { CLK("vpif", NULL, &vpif_clk), CLK("ahci", NULL, &sata_clk), CLK("davinci-rproc.0", NULL, &dsp_clk), + CLK("ehrpwm", "fck", &ehrpwm_clk), + CLK("ehrpwm", "tbclk", &ehrpwm_tbclk), + CLK("ecap", "fck", &ecap_clk), CLK(NULL, NULL, NULL), }; diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 6b7a0a27fbd1..b1c0a5958275 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -20,7 +20,7 @@ #define DA8XX_NUM_UARTS 3 -void __init da8xx_uart_clk_enable(void) +static void __init da8xx_uart_clk_enable(void) { int i; for (i = 0; i < DA8XX_NUM_UARTS; i++) @@ -37,9 +37,10 @@ static void __init da8xx_init_irq(void) of_irq_init(da8xx_irq_match); } -struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { +static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL), + OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL), {} }; diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 12d544befcfa..1ab3df423dac 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -36,12 +36,19 @@ #include <media/davinci/vpbe_osd.h> #define DAVINCI_SYSTEM_MODULE_BASE 0x01c40000 +#define SYSMOD_VDAC_CONFIG 0x2c #define SYSMOD_VIDCLKCTL 0x38 #define SYSMOD_VPSS_CLKCTL 0x44 #define SYSMOD_VDD3P3VPWDN 0x48 #define SYSMOD_VSCLKDIS 0x6c #define SYSMOD_PUPDCTL1 0x7c +/* VPSS CLKCTL bit definitions */ +#define VPSS_MUXSEL_EXTCLK_ENABLE BIT(1) +#define VPSS_VENCCLKEN_ENABLE BIT(3) +#define VPSS_DACCLKEN_ENABLE BIT(4) +#define VPSS_PLLC2SYSCLK5_ENABLE BIT(5) + extern void __iomem *davinci_sysmod_base; #define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x)) void davinci_map_sysmod(void); @@ -74,7 +81,7 @@ void __init dm355_init(void); void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); -void dm355_set_vpfe_config(struct vpfe_config *cfg); +int dm355_init_video(struct vpfe_config *, struct vpbe_config *); /* DM365 function declarations */ void __init dm365_init(void); @@ -84,7 +91,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); void __init dm365_init_rtc(void); void dm365_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); -void dm365_set_vpfe_config(struct vpfe_config *cfg); +int dm365_init_video(struct vpfe_config *, struct vpbe_config *); /* DM644x function declarations */ void __init dm644x_init(void); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index fc50243b1481..bf572525175d 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -12,7 +12,7 @@ */ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/dma-mapping.h> +#include <linux/dma-contiguous.h> #include <linux/serial_8250.h> #include <linux/ahci_platform.h> #include <linux/clk.h> @@ -664,7 +664,7 @@ static struct resource da8xx_mmcsd0_resources[] = { }; static struct platform_device da8xx_mmcsd0_device = { - .name = "davinci_mmc", + .name = "da830-mmc", .id = 0, .num_resources = ARRAY_SIZE(da8xx_mmcsd0_resources), .resource = da8xx_mmcsd0_resources, @@ -701,7 +701,7 @@ static struct resource da850_mmcsd1_resources[] = { }; static struct platform_device da850_mmcsd1_device = { - .name = "davinci_mmc", + .name = "da830-mmc", .id = 1, .num_resources = ARRAY_SIZE(da850_mmcsd1_resources), .resource = da850_mmcsd1_resources, @@ -714,6 +714,92 @@ int __init da850_register_mmcsd1(struct davinci_mmc_config *config) } #endif +static struct resource da8xx_rproc_resources[] = { + { /* DSP boot address */ + .start = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG, + .end = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG + 3, + .flags = IORESOURCE_MEM, + }, + { /* DSP interrupt registers */ + .start = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG, + .end = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG + 7, + .flags = IORESOURCE_MEM, + }, + { /* dsp irq */ + .start = IRQ_DA8XX_CHIPINT0, + .end = IRQ_DA8XX_CHIPINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_dsp = { + .name = "davinci-rproc", + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(da8xx_rproc_resources), + .resource = da8xx_rproc_resources, +}; + +#if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC) + +static phys_addr_t rproc_base __initdata; +static unsigned long rproc_size __initdata; + +static int __init early_rproc_mem(char *p) +{ + char *endp; + + if (p == NULL) + return 0; + + rproc_size = memparse(p, &endp); + if (*endp == '@') + rproc_base = memparse(endp + 1, NULL); + + return 0; +} +early_param("rproc_mem", early_rproc_mem); + +void __init da8xx_rproc_reserve_cma(void) +{ + int ret; + + if (!rproc_base || !rproc_size) { + pr_err("%s: 'rproc_mem=nn@address' badly specified\n" + " 'nn' and 'address' must both be non-zero\n", + __func__); + + return; + } + + pr_info("%s: reserving 0x%lx @ 0x%lx...\n", + __func__, rproc_size, (unsigned long)rproc_base); + + ret = dma_declare_contiguous(&da8xx_dsp.dev, rproc_size, rproc_base, 0); + if (ret) + pr_err("%s: dma_declare_contiguous failed %d\n", __func__, ret); +} + +#else + +void __init da8xx_rproc_reserve_cma(void) +{ +} + +#endif + +int __init da8xx_register_rproc(void) +{ + int ret; + + ret = platform_device_register(&da8xx_dsp); + if (ret) + pr_err("%s: can't register DSP device: %d\n", __func__, ret); + + return ret; +}; + static struct resource da8xx_rtc_resources[] = { { .start = DA8XX_RTC_BASE, diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 773ab07a71a0..cfb194df18ed 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -218,7 +218,7 @@ static u64 mmc1_dma_mask = DMA_BIT_MASK(32); static struct platform_device mmc_devices[2] = { { - .name = "davinci_mmc", + .name = "dm6441-mmc", .id = 0, .dev = { .dma_mask = &mmc0_dma_mask, @@ -228,7 +228,7 @@ static struct platform_device mmc_devices[2] = { .resource = mmc0_resources }, { - .name = "davinci_mmc", + .name = "dm6441-mmc", .id = 1, .dev = { .dma_mask = &mmc1_dma_mask, diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 4c48a36ee567..f6927df2dda8 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -150,7 +150,7 @@ static struct resource mmcsd0_resources[] = { }; static struct platform_device davinci_mmcsd0_device = { - .name = "davinci_mmc", + .name = "dm6441-mmc", .id = 0, .dev = { .dma_mask = &mmcsd0_dma_mask, @@ -187,7 +187,7 @@ static struct resource mmcsd1_resources[] = { }; static struct platform_device davinci_mmcsd1_device = { - .name = "davinci_mmc", + .name = "dm6441-mmc", .id = 1, .dev = { .dma_mask = &mmcsd1_dma_mask, @@ -235,6 +235,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd1_resources[0].end = DM365_MMCSD1_BASE + SZ_4K - 1; mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1; + davinci_mmcsd1_device.name = "da830-mmc"; } else break; @@ -256,6 +257,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd0_resources[0].end = DM365_MMCSD0_BASE + SZ_4K - 1; mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0; + davinci_mmcsd0_device.name = "da830-mmc"; } else if (cpu_is_davinci_dm644x()) { /* REVISIT: should this be in board-init code? */ /* Power-on 3.3V IO cells */ diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index b49c3b77d55e..a11034a358f1 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -35,6 +35,8 @@ #include "asp.h" #define DM355_UART2_BASE (IO_PHYS + 0x206000) +#define DM355_OSD_BASE (IO_PHYS + 0x70200) +#define DM355_VENC_BASE (IO_PHYS + 0x70400) /* * Device specific clocks @@ -345,8 +347,8 @@ static struct clk_lookup dm355_clks[] = { CLK(NULL, "pll1_aux", &pll1_aux_clk), CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), CLK(NULL, "vpss_dac", &vpss_dac_clk), - CLK(NULL, "vpss_master", &vpss_master_clk), - CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK("vpss", "master", &vpss_master_clk), + CLK("vpss", "slave", &vpss_slave_clk), CLK(NULL, "clkout1", &clkout1_clk), CLK(NULL, "clkout2", &clkout2_clk), CLK(NULL, "pll2", &pll2_clk), @@ -361,8 +363,8 @@ static struct clk_lookup dm355_clks[] = { CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("davinci-mcbsp.0", NULL, &asp0_clk), CLK("davinci-mcbsp.1", NULL, &asp1_clk), - CLK("davinci_mmc.0", NULL, &mmcsd0_clk), - CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK("dm6441-mmc.0", NULL, &mmcsd0_clk), + CLK("dm6441-mmc.1", NULL, &mmcsd1_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), CLK("spi_davinci.2", NULL, &spi2_clk), @@ -744,11 +746,146 @@ static struct platform_device vpfe_capture_dev = { }, }; -void dm355_set_vpfe_config(struct vpfe_config *cfg) +static struct resource dm355_osd_resources[] = { + { + .start = DM355_OSD_BASE, + .end = DM355_OSD_BASE + 0x17f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm355_osd_dev = { + .name = DM355_VPBE_OSD_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm355_osd_resources), + .resource = dm355_osd_resources, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource dm355_venc_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM355_VENC_BASE, + .end = DM355_VENC_BASE + 0x17f, + .flags = IORESOURCE_MEM, + }, + /* VDAC config register io space */ + { + .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG, + .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource dm355_v4l2_disp_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM355_VENC_BASE, + .end = DM355_VENC_BASE + 0x17f, + .flags = IORESOURCE_MEM, + }, +}; + +static int dm355_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type, + int field) +{ + switch (if_type) { + case V4L2_MBUS_FMT_SGRBG8_1X8: + davinci_cfg_reg(DM355_VOUT_FIELD_G70); + break; + case V4L2_MBUS_FMT_YUYV10_1X20: + if (field) + davinci_cfg_reg(DM355_VOUT_FIELD); + else + davinci_cfg_reg(DM355_VOUT_FIELD_G70); + break; + default: + return -EINVAL; + } + + davinci_cfg_reg(DM355_VOUT_COUTL_EN); + davinci_cfg_reg(DM355_VOUT_COUTH_EN); + + return 0; +} + +static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type, + unsigned int pclock) { - vpfe_capture_dev.dev.platform_data = cfg; + void __iomem *vpss_clk_ctrl_reg; + + vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL); + + switch (type) { + case VPBE_ENC_STD: + writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE, + vpss_clk_ctrl_reg); + break; + case VPBE_ENC_DV_TIMINGS: + if (pclock > 27000000) + /* + * For HD, use external clock source since we cannot + * support HD mode with internal clocks. + */ + writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg); + break; + default: + return -EINVAL; + } + + return 0; } +static struct platform_device dm355_vpbe_display = { + .name = "vpbe-v4l2", + .id = -1, + .num_resources = ARRAY_SIZE(dm355_v4l2_disp_resources), + .resource = dm355_v4l2_disp_resources, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct venc_platform_data dm355_venc_pdata = { + .setup_pinmux = dm355_vpbe_setup_pinmux, + .setup_clock = dm355_venc_setup_clock, +}; + +static struct platform_device dm355_venc_dev = { + .name = DM355_VPBE_VENC_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm355_venc_resources), + .resource = dm355_venc_resources, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = (void *)&dm355_venc_pdata, + }, +}; + +static struct platform_device dm355_vpbe_dev = { + .name = "vpbe_controller", + .id = -1, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + /*----------------------------------------------------------------------*/ static struct map_desc dm355_io_desc[] = { @@ -868,19 +1005,36 @@ void __init dm355_init(void) davinci_map_sysmod(); } +int __init dm355_init_video(struct vpfe_config *vpfe_cfg, + struct vpbe_config *vpbe_cfg) +{ + if (vpfe_cfg || vpbe_cfg) + platform_device_register(&dm355_vpss_device); + + if (vpfe_cfg) { + vpfe_capture_dev.dev.platform_data = vpfe_cfg; + platform_device_register(&dm355_ccdc_dev); + platform_device_register(&vpfe_capture_dev); + } + + if (vpbe_cfg) { + dm355_vpbe_dev.dev.platform_data = vpbe_cfg; + platform_device_register(&dm355_osd_dev); + platform_device_register(&dm355_venc_dev); + platform_device_register(&dm355_vpbe_dev); + platform_device_register(&dm355_vpbe_display); + } + + return 0; +} + static int __init dm355_init_devices(void) { if (!cpu_is_davinci_dm355()) return 0; - /* Add ccdc clock aliases */ - clk_add_alias("master", dm355_ccdc_dev.name, "vpss_master", NULL); - clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_master", NULL); davinci_cfg_reg(DM355_INT_EDMA_CC); platform_device_register(&dm355_edma_device); - platform_device_register(&dm355_vpss_device); - platform_device_register(&dm355_ccdc_dev); - platform_device_register(&vpfe_capture_dev); return 0; } diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 6c3980540be0..40fa4fee9331 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -39,16 +39,13 @@ #include "asp.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ - -/* Base of key scan register bank */ -#define DM365_KEYSCAN_BASE 0x01c69400 - #define DM365_RTC_BASE 0x01c69000 - +#define DM365_KEYSCAN_BASE 0x01c69400 +#define DM365_OSD_BASE 0x01c71c00 +#define DM365_VENC_BASE 0x01c71e00 #define DAVINCI_DM365_VC_BASE 0x01d0c000 #define DAVINCI_DMA_VC_TX 2 #define DAVINCI_DMA_VC_RX 3 - #define DM365_EMAC_BASE 0x01d07000 #define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) #define DM365_EMAC_CNTRL_OFFSET 0x0000 @@ -257,6 +254,12 @@ static struct clk vpss_master_clk = { .flags = CLK_PSC, }; +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + static struct clk arm_clk = { .name = "arm_clk", .parent = &pll2_sysclk2, @@ -449,13 +452,14 @@ static struct clk_lookup dm365_clks[] = { CLK(NULL, "pll2_sysclk8", &pll2_sysclk8), CLK(NULL, "pll2_sysclk9", &pll2_sysclk9), CLK(NULL, "vpss_dac", &vpss_dac_clk), - CLK(NULL, "vpss_master", &vpss_master_clk), + CLK("vpss", "master", &vpss_master_clk), + CLK("vpss", "slave", &vpss_slave_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("davinci_mmc.0", NULL, &mmcsd0_clk), - CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK("da830-mmc.0", NULL, &mmcsd0_clk), + CLK("da830-mmc.1", NULL, &mmcsd1_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), CLK("spi_davinci.2", NULL, &spi2_clk), @@ -1226,6 +1230,173 @@ static struct platform_device dm365_isif_dev = { }, }; +static struct resource dm365_osd_resources[] = { + { + .start = DM365_OSD_BASE, + .end = DM365_OSD_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static u64 dm365_video_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device dm365_osd_dev = { + .name = DM365_VPBE_OSD_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm365_osd_resources), + .resource = dm365_osd_resources, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource dm365_venc_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM365_VENC_BASE, + .end = DM365_VENC_BASE + 0x177, + .flags = IORESOURCE_MEM, + }, + /* vdaccfg registers io space */ + { + .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG, + .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource dm365_v4l2_disp_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM365_VENC_BASE, + .end = DM365_VENC_BASE + 0x177, + .flags = IORESOURCE_MEM, + }, +}; + +static int dm365_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type, + int field) +{ + switch (if_type) { + case V4L2_MBUS_FMT_SGRBG8_1X8: + davinci_cfg_reg(DM365_VOUT_FIELD_G81); + davinci_cfg_reg(DM365_VOUT_COUTL_EN); + davinci_cfg_reg(DM365_VOUT_COUTH_EN); + break; + case V4L2_MBUS_FMT_YUYV10_1X20: + if (field) + davinci_cfg_reg(DM365_VOUT_FIELD); + else + davinci_cfg_reg(DM365_VOUT_FIELD_G81); + davinci_cfg_reg(DM365_VOUT_COUTL_EN); + davinci_cfg_reg(DM365_VOUT_COUTH_EN); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type, + unsigned int pclock) +{ + void __iomem *vpss_clkctl_reg; + u32 val; + + vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL); + + switch (type) { + case VPBE_ENC_STD: + val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE; + break; + case VPBE_ENC_DV_TIMINGS: + if (pclock <= 27000000) { + val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE; + } else { + /* set sysclk4 to output 74.25 MHz from pll1 */ + val = VPSS_PLLC2SYSCLK5_ENABLE | VPSS_DACCLKEN_ENABLE | + VPSS_VENCCLKEN_ENABLE; + } + break; + default: + return -EINVAL; + } + writel(val, vpss_clkctl_reg); + + return 0; +} + +static struct platform_device dm365_vpbe_display = { + .name = "vpbe-v4l2", + .id = -1, + .num_resources = ARRAY_SIZE(dm365_v4l2_disp_resources), + .resource = dm365_v4l2_disp_resources, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct venc_platform_data dm365_venc_pdata = { + .setup_pinmux = dm365_vpbe_setup_pinmux, + .setup_clock = dm365_venc_setup_clock, +}; + +static struct platform_device dm365_venc_dev = { + .name = DM365_VPBE_VENC_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm365_venc_resources), + .resource = dm365_venc_resources, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = (void *)&dm365_venc_pdata, + }, +}; + +static struct platform_device dm365_vpbe_dev = { + .name = "vpbe_controller", + .id = -1, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +int __init dm365_init_video(struct vpfe_config *vpfe_cfg, + struct vpbe_config *vpbe_cfg) +{ + if (vpfe_cfg || vpbe_cfg) + platform_device_register(&dm365_vpss_device); + + if (vpfe_cfg) { + vpfe_capture_dev.dev.platform_data = vpfe_cfg; + platform_device_register(&dm365_isif_dev); + platform_device_register(&vpfe_capture_dev); + } + if (vpbe_cfg) { + dm365_vpbe_dev.dev.platform_data = vpbe_cfg; + platform_device_register(&dm365_osd_dev); + platform_device_register(&dm365_venc_dev); + platform_device_register(&dm365_vpbe_dev); + platform_device_register(&dm365_vpbe_display); + } + + return 0; +} + static int __init dm365_init_devices(void) { if (!cpu_is_davinci_dm365()) @@ -1239,16 +1410,6 @@ static int __init dm365_init_devices(void) clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev), NULL, &dm365_emac_device.dev); - /* Add isif clock alias */ - clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL); - platform_device_register(&dm365_vpss_device); - platform_device_register(&dm365_isif_dev); - platform_device_register(&vpfe_capture_dev); return 0; } postcore_initcall(dm365_init_devices); - -void dm365_set_vpfe_config(struct vpfe_config *cfg) -{ - vpfe_capture_dev.dev.platform_data = cfg; -} diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index db1dd92e00af..4d37d3e2a193 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -300,8 +300,8 @@ static struct clk_lookup dm644x_clks[] = { CLK(NULL, "dsp", &dsp_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "vicp", &vicp_clk), - CLK(NULL, "vpss_master", &vpss_master_clk), - CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK("vpss", "master", &vpss_master_clk), + CLK("vpss", "slave", &vpss_slave_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), @@ -310,7 +310,7 @@ static struct clk_lookup dm644x_clks[] = { CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("palm_bk3710", NULL, &ide_clk), CLK("davinci-mcbsp", NULL, &asp_clk), - CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK("dm6441-mmc.0", NULL, &mmcsd_clk), CLK(NULL, "spi", &spi_clk), CLK(NULL, "gpio", &gpio_clk), CLK(NULL, "usb", &usb_clk), @@ -706,7 +706,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); break; - case VPBE_ENC_CUSTOM_TIMINGS: + case VPBE_ENC_DV_TIMINGS: if (pclock <= 27000000) { v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); @@ -901,11 +901,6 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, dm644x_vpfe_dev.dev.platform_data = vpfe_cfg; platform_device_register(&dm644x_ccdc_dev); platform_device_register(&dm644x_vpfe_dev); - /* Add ccdc clock aliases */ - clk_add_alias("master", dm644x_ccdc_dev.name, - "vpss_master", NULL); - clk_add_alias("slave", dm644x_ccdc_dev.name, - "vpss_slave", NULL); } if (vpbe_cfg) { diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index de439b7b9af1..2e1c9eae0a58 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -54,7 +54,10 @@ extern unsigned int da850_max_speed; #define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000) #define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x)) #define DA8XX_JTAG_ID_REG 0x18 +#define DA8XX_HOST1CFG_REG 0x44 +#define DA8XX_CHIPSIG_REG 0x174 #define DA8XX_CFGCHIP0_REG 0x17c +#define DA8XX_CFGCHIP1_REG 0x180 #define DA8XX_CFGCHIP2_REG 0x184 #define DA8XX_CFGCHIP3_REG 0x188 @@ -104,6 +107,8 @@ int __init da850_register_vpif_display int __init da850_register_vpif_capture (struct vpif_capture_config *capture_config); void da8xx_restart(char mode, const char *cmd); +void da8xx_rproc_reserve_cma(void); +int da8xx_register_rproc(void); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 34290d14754b..b18b8ebc6508 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -24,8 +24,6 @@ #if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0) #define UART_BASE DAVINCI_UART0_BASE -#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0) -#define UART_BASE DA8XX_UART0_BASE #elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1) #define UART_BASE DA8XX_UART1_BASE #elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2) diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index eb8360b33aa9..a508fe587af7 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -19,6 +19,7 @@ #include <asm/delay.h> #include <asm/io.h> +#include <mach/common.h> #include <mach/da8xx.h> #include <mach/sram.h> #include <mach/pm.h> diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c index c90250e3bef8..6b98413cebd6 100644 --- a/arch/arm/mach-davinci/pm_domain.c +++ b/arch/arm/mach-davinci/pm_domain.c @@ -53,7 +53,7 @@ static struct dev_pm_domain davinci_pm_domain = { static struct pm_clk_notifier_block platform_bus_notifier = { .pm_domain = &davinci_pm_domain, - .con_ids = { "fck", NULL, }, + .con_ids = { "fck", "master", "slave", NULL }, }; static int __init davinci_pm_runtime_init(void) diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index c5f7ee5cc80a..f18928b073f5 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -62,7 +62,7 @@ static int __init sram_init(void) phys_addr_t phys = davinci_soc_info.sram_dma; unsigned len = davinci_soc_info.sram_len; int status = 0; - void *addr; + void __iomem *addr; if (len) { len = min_t(unsigned, len, SRAM_SIZE); @@ -75,7 +75,7 @@ static int __init sram_init(void) addr = ioremap(phys, len); if (!addr) return -ENOMEM; - status = gen_pool_add_virt(sram_pool, (unsigned)addr, + status = gen_pool_add_virt(sram_pool, (unsigned long) addr, phys, len, -1); if (status < 0) iounmap(addr); diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c index dc1a209b9b66..3b2a70d43efa 100644 --- a/arch/arm/mach-davinci/tnetv107x.c +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -272,7 +272,7 @@ static struct clk_lookup clks[] = { CLK("tnetv107x-keypad.0", NULL, &clk_keypad), CLK(NULL, "clk_gpio", &clk_gpio), CLK(NULL, "clk_mdio", &clk_mdio), - CLK("davinci_mmc.0", NULL, &clk_sdio0), + CLK("dm6441-mmc.0", NULL, &clk_sdio0), CLK(NULL, "uart0", &clk_uart0), CLK(NULL, "uart1", &clk_uart1), CLK(NULL, "timer0", &clk_timer0), @@ -292,7 +292,7 @@ static struct clk_lookup clks[] = { CLK(NULL, "clk_system", &clk_system), CLK(NULL, "clk_imcop", &clk_imcop), CLK(NULL, "clk_spare", &clk_spare), - CLK("davinci_mmc.1", NULL, &clk_sdio1), + CLK("dm6441-mmc.1", NULL, &clk_sdio1), CLK(NULL, "clk_ddr2_vrst", &clk_ddr2_vrst), CLK(NULL, "clk_ddr2_vctl_rst", &clk_ddr2_vctl_rst), CLK(NULL, NULL, NULL), diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 34509ffba221..2b4c648f99b6 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -10,6 +10,7 @@ #include <mach/common.h> #include <mach/irqs.h> #include <mach/cputype.h> +#include <mach/da8xx.h> #include <linux/platform_data/usb-davinci.h> #define DAVINCI_USB_OTG_BASE 0x01c64000 diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index d2afb4dd82ab..b5cc77d2380b 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr) static inline void putc(int c) { - /* Transmit fifo not full? */ - while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF) - ; + int i; + + for (i = 0; i < 10000; i++) { + /* Transmit fifo not full? */ + if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) + break; + } __raw_writeb(c, PHYS_UART_DATA); } diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b1cdff6f537e..d19edff0ea6e 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -14,6 +14,7 @@ menu "SAMSUNG EXYNOS SoCs Support" config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" default y + select HAVE_ARM_SCU if SMP select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -21,6 +22,7 @@ config ARCH_EXYNOS4 config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" + select HAVE_ARM_SCU if SMP select HAVE_SMP help Samsung EXYNOS5 (Cortex-A15) SoC based systems @@ -73,10 +75,12 @@ config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y depends on ARCH_EXYNOS5 + select ARCH_HAS_OPP select ARM_ARCH_TIMER select AUTO_ZRELADDR select PINCTRL select PINCTRL_EXYNOS5440 + select PM_OPP help Enable EXYNOS5440 SoC support @@ -103,11 +107,6 @@ config EXYNOS4_DEV_AHCI help Compile in platform device definitions for AHCI -config EXYNOS_DEV_DRM - bool - help - Compile in platform device definitions for core DRM device - config EXYNOS4_SETUP_FIMD0 bool help @@ -207,7 +206,6 @@ config MACH_SMDKV310 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select S3C24XX_PWM select S3C_DEV_HSMMC @@ -261,9 +259,7 @@ config MACH_UNIVERSAL_C210 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU - select HAVE_SCHED_CLOCK select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -302,7 +298,6 @@ config MACH_NURI select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -338,7 +333,6 @@ config MACH_ORIGEN select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select S3C24XX_PWM select S3C_DEV_HSMMC @@ -374,7 +368,6 @@ config MACH_SMDK4212 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select S3C24XX_PWM select S3C_DEV_HSMMC2 @@ -418,7 +411,7 @@ config MACH_EXYNOS4_DT select ARM_AMBA select CLKSRC_OF select CPU_EXYNOS4210 - select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD + select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL select PINCTRL_EXYNOS select S5P_DEV_MFC diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 939bda77defa..b35c60059bb8 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -23,11 +23,11 @@ #include <linux/of_irq.h> #include <linux/export.h> #include <linux/irqdomain.h> -#include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/clocksource.h> #include <linux/clk-provider.h> #include <linux/irqchip/arm-gic.h> +#include <linux/irqchip/chained_irq.h> #include <asm/proc-fns.h> #include <asm/exception.h> @@ -439,6 +439,8 @@ void __init exynos4_init_irq(void) * uses GIC instead of VIC. */ s5p_init_irq(NULL, 0); + + gic_arch_extn.irq_set_wake = s3c_irq_wake; } void __init exynos5_init_irq(void) diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index fcfe0251aa3e..17a18ff3d71e 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -41,24 +41,24 @@ static int exynos4_enter_lowpower(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); -static struct cpuidle_state exynos4_cpuidle_set[] __initdata = { - [0] = ARM_CPUIDLE_WFI_STATE, - [1] = { - .enter = exynos4_enter_lowpower, - .exit_latency = 300, - .target_residency = 100000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "C1", - .desc = "ARM power down", - }, -}; - static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); static struct cpuidle_driver exynos4_idle_driver = { .name = "exynos4_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, + .states = { + [0] = ARM_CPUIDLE_WFI_STATE, + [1] = { + .enter = exynos4_enter_lowpower, + .exit_latency = 300, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C1", + .desc = "ARM power down", + }, + }, + .state_count = 2, + .safe_state_index = 0, }; /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ @@ -193,37 +193,30 @@ static void __init exynos5_core_down_clk(void) static int __init exynos4_init_cpuidle(void) { - int i, max_cpuidle_state, cpu_id; + int cpu_id, ret; struct cpuidle_device *device; - struct cpuidle_driver *drv = &exynos4_idle_driver; if (soc_is_exynos5250()) exynos5_core_down_clk(); - /* Setup cpuidle driver */ - drv->state_count = (sizeof(exynos4_cpuidle_set) / - sizeof(struct cpuidle_state)); - max_cpuidle_state = drv->state_count; - for (i = 0; i < max_cpuidle_state; i++) { - memcpy(&drv->states[i], &exynos4_cpuidle_set[i], - sizeof(struct cpuidle_state)); + ret = cpuidle_register_driver(&exynos4_idle_driver); + if (ret) { + printk(KERN_ERR "CPUidle failed to register driver\n"); + return ret; } - drv->safe_state_index = 0; - cpuidle_register_driver(&exynos4_idle_driver); - for_each_cpu(cpu_id, cpu_online_mask) { + for_each_online_cpu(cpu_id) { device = &per_cpu(exynos4_cpuidle_device, cpu_id); device->cpu = cpu_id; - if (cpu_id == 0) - device->state_count = (sizeof(exynos4_cpuidle_set) / - sizeof(struct cpuidle_state)); - else - device->state_count = 1; /* Support IDLE only */ + /* Support IDLE only */ + if (cpu_id != 0) + device->state_count = 1; - if (cpuidle_register_device(device)) { - printk(KERN_ERR "CPUidle register device failed\n,"); - return -EIO; + ret = cpuidle_register_device(device); + if (ret) { + printk(KERN_ERR "CPUidle register device failed\n"); + return ret; } } diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c index 4244d02dafbd..d5bc129e6bb7 100644 --- a/arch/arm/mach-exynos/dev-ohci.c +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -12,7 +12,7 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <mach/irqs.h> #include <mach/map.h> diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index c3f825b27947..af90cfa2f826 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -28,7 +28,6 @@ static inline void cpu_enter_lowpower_a9(void) { unsigned int v; - flush_cache_all(); asm volatile( " mcr p15, 0, %1, c7, c5, 0\n" " mcr p15, 0, %1, c7, c10, 4\n" diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index a67ecfaf1216..7dbbfec13ea5 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -27,13 +27,8 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - unsigned int tmp; - tmp = __raw_readl(S5P_WAKEUP_MASK); - tmp &= ~(1 << 31); - __raw_writel(tmp, S5P_WAKEUP_MASK); - - __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); - __raw_writel(s3c_irqwake_eintmask & 0xFFFFFFFE, S5P_EINT_WAKEUP_MASK); + __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); + __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } static inline void s3c_pm_arch_stop_clocks(void) diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 081a5baadd8b..5c8b2878dbbd 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -1252,7 +1252,7 @@ static void __init nuri_camera_init(void) } m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT); - if (!IS_ERR_VALUE(m5mols_board_info.irq)) + if (m5mols_board_info.irq >= 0) s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF)); else pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__); diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 27ebe44785f0..27f03ed5d067 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -26,7 +26,7 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> #include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index ee312b676772..d95b8cf85253 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -23,7 +23,7 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> #include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 72f08fd7cfa9..327d50d4681d 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -97,6 +97,19 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { static struct regulator_consumer_supply max8952_consumer = REGULATOR_SUPPLY("vdd_arm", NULL); +static struct regulator_init_data universal_max8952_reg_data = { + .constraints = { + .name = "VARM_1.2V", + .min_uV = 770000, + .max_uV = 1400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8952_consumer, +}; + static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), .gpio_vid1 = EXYNOS4_GPX0(4), @@ -105,19 +118,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */ .sync_freq = 0, /* default: fastest */ .ramp_speed = 0, /* default: fastest */ - - .reg_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 770000, - .max_uV = 1400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8952_consumer, - }, + .reg_data = &universal_max8952_reg_data, }; static struct regulator_consumer_supply lp3974_buck1_consumer = diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 60f7c5be057d..95e04bd5813f 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,7 +20,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -76,13 +75,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit exynos_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index b81cc569a8dd..6af40662a449 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -204,9 +204,9 @@ static int exynos4210_usb_phy1_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return exynos4210_usb_phy0_init(pdev); - else if (type == S5P_USB_PHY_HOST) + else if (type == USB_PHY_TYPE_HOST) return exynos4210_usb_phy1_init(pdev); return -EINVAL; @@ -214,9 +214,9 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return exynos4210_usb_phy0_exit(pdev); - else if (type == S5P_USB_PHY_HOST) + else if (type == USB_PHY_TYPE_HOST) return exynos4210_usb_phy1_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index 7355c0bbcb5e..7963a77be637 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o mm.o time.o devices.o gpio.o idle.o +obj-y := irq.o mm.o time.o devices.o gpio.o idle.o reset.o # Board-specific support obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c index 08bd650c42f3..ca8a25bb3521 100644 --- a/arch/arm/mach-gemini/board-nas4220b.c +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -103,4 +103,5 @@ MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = ib4220b_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c index fa0a36337f4d..7a675f88ffd6 100644 --- a/arch/arm/mach-gemini/board-rut1xx.c +++ b/arch/arm/mach-gemini/board-rut1xx.c @@ -14,6 +14,7 @@ #include <linux/leds.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -87,4 +88,5 @@ MACHINE_START(RUT100, "Teltonika RUT100") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = rut1xx_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index 3321cd6cc1f3..418188cd1712 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -130,4 +130,5 @@ MACHINE_START(WBD111, "Wiliboard WBD-111") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = wbd111_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index fe33c825fdaf..266b265090cd 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -130,4 +130,5 @@ MACHINE_START(WBD222, "Wiliboard WBD-222") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = wbd222_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h index 7670c39acb2f..38a45260a7c8 100644 --- a/arch/arm/mach-gemini/common.h +++ b/arch/arm/mach-gemini/common.h @@ -26,4 +26,6 @@ extern int platform_register_pflash(unsigned int size, struct mtd_partition *parts, unsigned int nr_parts); +extern void gemini_restart(char mode, const char *cmd); + #endif /* __GEMINI_COMMON_H__ */ diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index fdc7ef1391d3..70bfa571b24b 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -21,6 +21,7 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/gpio.h> #define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x)) @@ -44,7 +45,7 @@ #define GPIO_PORT_NUM 3 -static void _set_gpio_irqenable(unsigned int base, unsigned int index, +static void _set_gpio_irqenable(void __iomem *base, unsigned int index, int enable) { unsigned int reg; @@ -57,7 +58,7 @@ static void _set_gpio_irqenable(unsigned int base, unsigned int index, static void gpio_ack_irq(struct irq_data *d) { unsigned int gpio = irq_to_gpio(d->irq); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR); } @@ -65,7 +66,7 @@ static void gpio_ack_irq(struct irq_data *d) static void gpio_mask_irq(struct irq_data *d) { unsigned int gpio = irq_to_gpio(d->irq); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); _set_gpio_irqenable(base, gpio % 32, 0); } @@ -73,7 +74,7 @@ static void gpio_mask_irq(struct irq_data *d) static void gpio_unmask_irq(struct irq_data *d) { unsigned int gpio = irq_to_gpio(d->irq); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); _set_gpio_irqenable(base, gpio % 32, 1); } @@ -82,7 +83,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type) { unsigned int gpio = irq_to_gpio(d->irq); unsigned int gpio_mask = 1 << (gpio % 32); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); unsigned int reg_both, reg_level, reg_type; reg_type = __raw_readl(base + GPIO_INT_TYPE); @@ -120,7 +121,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type) __raw_writel(reg_level, base + GPIO_INT_LEVEL); __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE); - gpio_ack_irq(d->irq); + gpio_ack_irq(d); return 0; } @@ -153,7 +154,7 @@ static struct irq_chip gpio_irq_chip = { static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, int dir) { - unsigned int base = GPIO_BASE(offset / 32); + void __iomem *base = GPIO_BASE(offset / 32); unsigned int reg; reg = __raw_readl(base + GPIO_DIR); @@ -166,7 +167,7 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - unsigned int base = GPIO_BASE(offset / 32); + void __iomem *base = GPIO_BASE(offset / 32); if (value) __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET); @@ -176,7 +177,7 @@ static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset) { - unsigned int base = GPIO_BASE(offset / 32); + void __iomem *base = GPIO_BASE(offset / 32); return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1; } diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c index 92bbd6bb600a..87dff4f5059e 100644 --- a/arch/arm/mach-gemini/idle.c +++ b/arch/arm/mach-gemini/idle.c @@ -13,9 +13,11 @@ static void gemini_idle(void) * will never wakeup... Acctualy it is not very good to enable * interrupts first since scheduler can miss a tick, but there is * no other way around this. Platforms that needs it for power saving - * should call enable_hlt() in init code, since by default it is + * should enable it in init code, since by default it is * disabled. */ + + /* FIXME: Enabling interrupts here is racy! */ local_irq_enable(); cpu_do_idle(); } diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h index 8c950e1d06be..98e7b0f286bf 100644 --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -69,6 +69,6 @@ /* * macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000) +#define IO_ADDRESS(x) IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000) #endif diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 020852d3bdd8..44f50dcb616d 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -15,6 +15,8 @@ #include <linux/stddef.h> #include <linux/list.h> #include <linux/sched.h> +#include <linux/cpu.h> + #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/system_misc.h> @@ -65,8 +67,8 @@ static struct irq_chip gemini_irq_chip = { static struct resource irq_resource = { .name = "irq_handler", - .start = IO_ADDRESS(GEMINI_INTERRUPT_BASE), - .end = IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4, + .start = GEMINI_INTERRUPT_BASE, + .end = FIQ_STATUS(GEMINI_INTERRUPT_BASE) + 4, }; void __init gemini_init_irq(void) @@ -77,7 +79,7 @@ void __init gemini_init_irq(void) * Disable the idle handler by default since it is buggy * For more info see arch/arm/mach-gemini/idle.c */ - disable_hlt(); + cpu_idle_poll_ctrl(true); request_resource(&iomem_resource, &irq_resource); diff --git a/arch/arm/mach-gemini/mm.c b/arch/arm/mach-gemini/mm.c index 51948242ec09..2c2cd284bb6a 100644 --- a/arch/arm/mach-gemini/mm.c +++ b/arch/arm/mach-gemini/mm.c @@ -19,57 +19,57 @@ /* Page table mapping for I/O region */ static struct map_desc gemini_io_desc[] __initdata = { { - .virtual = IO_ADDRESS(GEMINI_GLOBAL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GLOBAL_BASE), .pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_UART_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_UART_BASE), .pfn = __phys_to_pfn(GEMINI_UART_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_TIMER_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE), .pfn = __phys_to_pfn(GEMINI_TIMER_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_INTERRUPT_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_INTERRUPT_BASE), .pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_POWER_CTRL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE), .pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(0)), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(0)), .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(1)), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(1)), .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(2)), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(2)), .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_FLASH_CTRL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE), .pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_DRAM_CTRL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_DRAM_CTRL_BASE), .pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GENERAL_DMA_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GENERAL_DMA_BASE), .pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE), .length = SZ_512K, .type = MT_DEVICE, diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/reset.c index a33b5a1f8ab4..b26659759e27 100644 --- a/arch/arm/mach-gemini/include/mach/system.h +++ b/arch/arm/mach-gemini/reset.c @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <mach/global_reg.h> -static inline void arch_reset(char mode, const char *cmd) +void gemini_restart(char mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET); diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig deleted file mode 100644 index 6bb755bcb6f5..000000000000 --- a/arch/arm/mach-h720x/Kconfig +++ /dev/null @@ -1,40 +0,0 @@ -if ARCH_H720X - -menu "h720x Implementations" - -config ARCH_H7201 - bool "gms30c7201" - depends on ARCH_H720X - select CPU_H7201 - select ZONE_DMA - help - Say Y here if you are using the Hynix GMS30C7201 Reference Board - -config ARCH_H7202 - bool "hms30c7202" - depends on ARCH_H720X - select CPU_H7202 - select ZONE_DMA - help - Say Y here if you are using the Hynix HMS30C7202 Reference Board - -endmenu - -config CPU_H7201 - bool - help - Select code specific to h7201 variants - -config CPU_H7202 - bool - help - Select code specific to h7202 variants -config H7202_SERIAL23 - depends on CPU_H7202 - bool "Use serial ports 2+3" - help - Say Y here if you wish to use serial ports 2+3. They share their - pins with the keyboard matrix controller, so you have to decide. - - -endif diff --git a/arch/arm/mach-h720x/Makefile b/arch/arm/mach-h720x/Makefile deleted file mode 100644 index e4cf728948eb..000000000000 --- a/arch/arm/mach-h720x/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Common support -obj-y := common.o -obj-m := -obj-n := -obj- := - -# Specific board support - -obj-$(CONFIG_ARCH_H7201) += h7201-eval.o -obj-$(CONFIG_ARCH_H7202) += h7202-eval.o -obj-$(CONFIG_CPU_H7201) += cpu-h7201.o -obj-$(CONFIG_CPU_H7202) += cpu-h7202.o diff --git a/arch/arm/mach-h720x/Makefile.boot b/arch/arm/mach-h720x/Makefile.boot deleted file mode 100644 index d875a7094dfe..000000000000 --- a/arch/arm/mach-h720x/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-$(CONFIG_ARCH_H720X) += 0x40008000 - diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c deleted file mode 100644 index 17ef91fa3d56..000000000000 --- a/arch/arm/mach-h720x/common.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/common.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * common stuff for Hynix h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/sched.h> -#include <linux/mman.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/dma.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/system_misc.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> -#include <mach/irqs.h> - -#include <asm/mach/dma.h> - -#if 0 -#define IRQDBG(args...) printk(args) -#else -#define IRQDBG(args...) do {} while(0) -#endif - -void __init arch_dma_init(dma_t *dma) -{ -} - -/* - * Return nsecs since last timer reload - * (timercount * (usecs perjiffie)) / (ticks per jiffie) - */ -u32 h720x_gettimeoffset(void) -{ - return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000; -} - -/* - * mask Global irq's - */ -static void mask_global_irq(struct irq_data *d) -{ - CPU_REG (IRQC_VIRT, IRQC_IER) &= ~(1 << d->irq); -} - -/* - * unmask Global irq's - */ -static void unmask_global_irq(struct irq_data *d) -{ - CPU_REG (IRQC_VIRT, IRQC_IER) |= (1 << d->irq); -} - - -/* - * ack GPIO irq's - * Ack only for edge triggered int's valid - */ -static void inline ack_gpio_irq(struct irq_data *d) -{ - u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq)); - u32 bit = IRQ_TO_BIT(d->irq); - if ( (CPU_REG (reg_base, GPIO_EDGE) & bit)) - CPU_REG (reg_base, GPIO_CLR) = bit; -} - -/* - * mask GPIO irq's - */ -static void inline mask_gpio_irq(struct irq_data *d) -{ - u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq)); - u32 bit = IRQ_TO_BIT(d->irq); - CPU_REG (reg_base, GPIO_MASK) &= ~bit; -} - -/* - * unmask GPIO irq's - */ -static void inline unmask_gpio_irq(struct irq_data *d) -{ - u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq)); - u32 bit = IRQ_TO_BIT(d->irq); - CPU_REG (reg_base, GPIO_MASK) |= bit; -} - -static void -h720x_gpio_handler(unsigned int mask, unsigned int irq, - struct irq_desc *desc) -{ - IRQDBG("%s irq: %d\n", __func__, irq); - while (mask) { - if (mask & 1) { - IRQDBG("handling irq %d\n", irq); - generic_handle_irq(irq); - } - irq++; - mask >>= 1; - } -} - -static void -h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOA(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -static void -h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOB(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -static void -h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOC(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -static void -h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOD(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -#ifdef CONFIG_CPU_H7202 -static void -h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOE(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} -#endif - -static struct irq_chip h720x_global_chip = { - .irq_ack = mask_global_irq, - .irq_mask = mask_global_irq, - .irq_unmask = unmask_global_irq, -}; - -static struct irq_chip h720x_gpio_chip = { - .irq_ack = ack_gpio_irq, - .irq_mask = mask_gpio_irq, - .irq_unmask = unmask_gpio_irq, -}; - -/* - * Initialize IRQ's, mask all, enable multiplexed irq's - */ -void __init h720x_init_irq (void) -{ - int irq; - - /* Mask global irq's */ - CPU_REG (IRQC_VIRT, IRQC_IER) = 0x0; - - /* Mask all multiplexed irq's */ - CPU_REG (GPIO_A_VIRT, GPIO_MASK) = 0x0; - CPU_REG (GPIO_B_VIRT, GPIO_MASK) = 0x0; - CPU_REG (GPIO_C_VIRT, GPIO_MASK) = 0x0; - CPU_REG (GPIO_D_VIRT, GPIO_MASK) = 0x0; - - /* Initialize global IRQ's, fast path */ - for (irq = 0; irq < NR_GLBL_IRQS; irq++) { - irq_set_chip_and_handler(irq, &h720x_global_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* Initialize multiplexed IRQ's, slow path */ - for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) { - irq_set_chip_and_handler(irq, &h720x_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID ); - } - irq_set_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler); - irq_set_chained_handler(IRQ_GPIOB, h720x_gpiob_demux_handler); - irq_set_chained_handler(IRQ_GPIOC, h720x_gpioc_demux_handler); - irq_set_chained_handler(IRQ_GPIOD, h720x_gpiod_demux_handler); - -#ifdef CONFIG_CPU_H7202 - for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) { - irq_set_chip_and_handler(irq, &h720x_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID ); - } - irq_set_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler); -#endif - - /* Enable multiplexed irq's */ - CPU_REG (IRQC_VIRT, IRQC_IER) = IRQ_ENA_MUX; -} - -static struct map_desc h720x_io_desc[] __initdata = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -/* Initialize io tables */ -void __init h720x_map_io(void) -{ - iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc)); -} - -void h720x_restart(char mode, const char *cmd) -{ - CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; -} - -static void h720x__idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - -static int __init h720x_idle_init(void) -{ - arm_pm_idle = h720x__idle; - return 0; -} - -arch_initcall(h720x_idle_init); diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h deleted file mode 100644 index 7e738410ca93..000000000000 --- a/arch/arm/mach-h720x/common.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/common.h - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * Architecture specific stuff for Hynix GMS30C7201 development board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -extern u32 h720x_gettimeoffset(void); -extern void __init h720x_init_irq(void); -extern void __init h720x_map_io(void); -extern void h720x_restart(char, const char *); - -#ifdef CONFIG_ARCH_H7202 -extern void h7202_timer_init(void); -extern void __init init_hw_h7202(void); -extern void __init h7202_init_irq(void); -extern void __init h7202_init_time(void); -#endif - -#ifdef CONFIG_ARCH_H7201 -extern void h7201_timer_init(void); -#endif diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c deleted file mode 100644 index 13c741215387..000000000000 --- a/arch/arm/mach-h720x/cpu-h7201.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/cpu-h7201.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * processor specific stuff for the Hynix h7201 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <asm/types.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include "common.h" -/* - * Timer interrupt handler - */ -static irqreturn_t -h7201_timer_interrupt(int irq, void *dev_id) -{ - CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); - timer_tick(); - - return IRQ_HANDLED; -} - -static struct irqaction h7201_timer_irq = { - .name = "h7201 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = h7201_timer_interrupt, -}; - -/* - * Setup TIMER0 as system timer - */ -void __init h7201_timer_init(void) -{ - arch_gettimeoffset = h720x_gettimeoffset; - - CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START; - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT; - - setup_irq(IRQ_TIMER0, &h7201_timer_irq); -} diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c deleted file mode 100644 index e2ae7e898f9d..000000000000 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/cpu-h7202.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * processor specific stuff for the Hynix h7202 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <asm/types.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <linux/device.h> -#include <linux/serial_8250.h> -#include "common.h" - -static struct resource h7202ps2_resources[] = { - [0] = { - .start = 0x8002c000, - .end = 0x8002c040, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PS2, - .end = IRQ_PS2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h7202ps2_device = { - .name = "h7202ps2", - .id = -1, - .num_resources = ARRAY_SIZE(h7202ps2_resources), - .resource = h7202ps2_resources, -}; - -static struct plat_serial8250_port serial_platform_data[] = { - { - .membase = (void*)SERIAL0_VIRT, - .mapbase = SERIAL0_BASE, - .irq = IRQ_UART0, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .membase = (void*)SERIAL1_VIRT, - .mapbase = SERIAL1_BASE, - .irq = IRQ_UART1, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, -#ifdef CONFIG_H7202_SERIAL23 - { - .membase = (void*)SERIAL2_VIRT, - .mapbase = SERIAL2_BASE, - .irq = IRQ_UART2, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .membase = (void*)SERIAL3_VIRT, - .mapbase = SERIAL3_BASE, - .irq = IRQ_UART3, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, -#endif - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct platform_device *devices[] __initdata = { - &h7202ps2_device, - &serial_device, -}; - -/* Although we have two interrupt lines for the timers, we only have one - * status register which clears all pending timer interrupts on reading. So - * we have to handle all timer interrupts in one place. - */ -static void -h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); - - if ( mask & TSTAT_T0INT ) { - timer_tick(); - if( mask == TSTAT_T0INT ) - return; - } - - mask >>= 1; - irq = IRQ_TIMER1; - while (mask) { - if (mask & 1) - generic_handle_irq(irq); - irq++; - mask >>= 1; - } -} - -/* - * Timer interrupt handler - */ -static irqreturn_t -h7202_timer_interrupt(int irq, void *dev_id) -{ - h7202_timerx_demux_handler(0, NULL); - return IRQ_HANDLED; -} - -/* - * mask multiplexed timer IRQs - */ -static void inline __mask_timerx_irq(unsigned int irq) -{ - unsigned int bit; - bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1)); - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit; -} - -static void inline mask_timerx_irq(struct irq_data *d) -{ - __mask_timerx_irq(d->irq); -} - -/* - * unmask multiplexed timer IRQs - */ -static void inline unmask_timerx_irq(struct irq_data *d) -{ - unsigned int bit; - bit = 2 << ((d->irq == IRQ_TIMER64B) ? 4 : (d->irq - IRQ_TIMER1)); - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit; -} - -static struct irq_chip h7202_timerx_chip = { - .irq_ack = mask_timerx_irq, - .irq_mask = mask_timerx_irq, - .irq_unmask = unmask_timerx_irq, -}; - -static struct irqaction h7202_timer_irq = { - .name = "h7202 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = h7202_timer_interrupt, -}; - -/* - * Setup TIMER0 as system timer - */ -void __init h7202_timer_init(void) -{ - arch_gettimeoffset = h720x_gettimeoffset; - - CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START; - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT; - - setup_irq(IRQ_TIMER0, &h7202_timer_irq); -} - -void __init h7202_init_irq (void) -{ - int irq; - - CPU_REG (GPIO_E_VIRT, GPIO_MASK) = 0x0; - - for (irq = IRQ_TIMER1; - irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) { - __mask_timerx_irq(irq); - irq_set_chip_and_handler(irq, &h7202_timerx_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID ); - } - irq_set_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler); - - h720x_init_irq(); -} - -void __init init_hw_h7202(void) -{ - /* Enable clocks */ - CPU_REG (PMU_BASE, PMU_PLL_CTRL) |= PLL_2_EN | PLL_1_EN | PLL_3_MUTE; - - CPU_REG (SERIAL0_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; - CPU_REG (SERIAL1_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; -#ifdef CONFIG_H7202_SERIAL23 - CPU_REG (SERIAL2_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; - CPU_REG (SERIAL3_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; - CPU_IO (GPIO_AMULSEL) = AMULSEL_USIN2 | AMULSEL_USOUT2 | - AMULSEL_USIN3 | AMULSEL_USOUT3; -#endif - (void) platform_add_devices(devices, ARRAY_SIZE(devices)); -} diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c deleted file mode 100644 index 4fdeb686c0a9..000000000000 --- a/arch/arm/mach-h720x/h7201-eval.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/h7201-eval.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * Architecture specific stuff for Hynix GMS30C7201 development board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/device.h> - -#include <asm/setup.h> -#include <asm/types.h> -#include <asm/mach-types.h> -#include <asm/page.h> -#include <asm/mach/arch.h> -#include <mach/hardware.h> -#include "common.h" - -MACHINE_START(H7201, "Hynix GMS30C7201") - /* Maintainer: Robert Schwebel, Pengutronix */ - .atag_offset = 0x1000, - .map_io = h720x_map_io, - .init_irq = h720x_init_irq, - .init_time = h7201_timer_init, - .dma_zone_size = SZ_256M, - .restart = h720x_restart, -MACHINE_END diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c deleted file mode 100644 index f68e967a2062..000000000000 --- a/arch/arm/mach-h720x/h7202-eval.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/h7202-eval.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * Architecture specific stuff for Hynix HMS30C7202 development board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <asm/setup.h> -#include <asm/types.h> -#include <asm/mach-types.h> -#include <asm/page.h> -#include <asm/mach/arch.h> -#include <mach/irqs.h> -#include <mach/hardware.h> -#include "common.h" - -static struct resource cirrus_resources[] = { - [0] = { - .start = ETH0_PHYS + 0x300, - .end = ETH0_PHYS + 0x300 + 0x10, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CHAINED_GPIOB(8), - .end = IRQ_CHAINED_GPIOB(8), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cirrus_device = { - .name = "cirrus-cs89x0", - .id = -1, - .num_resources = ARRAY_SIZE(cirrus_resources), - .resource = cirrus_resources, -}; - -static struct platform_device *devices[] __initdata = { - &cirrus_device, -}; - -/* - * Hardware init. This is called early in initcalls - * Place pin inits here. So you avoid adding ugly - * #ifdef stuff to common drivers. - * Use this only, if your bootloader is not able - * to initialize the pins proper. - */ -static void __init init_eval_h7202(void) -{ - init_hw_h7202(); - (void) platform_add_devices(devices, ARRAY_SIZE(devices)); - - /* Enable interrupt on portb bit 8 (ethernet) */ - CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8); - CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8); -} - -MACHINE_START(H7202, "Hynix HMS30C7202") - /* Maintainer: Robert Schwebel, Pengutronix */ - .atag_offset = 0x100, - .map_io = h720x_map_io, - .init_irq = h7202_init_irq, - .init_time = h7202_timer_init, - .init_machine = init_eval_h7202, - .dma_zone_size = SZ_256M, - .restart = h720x_restart, -MACHINE_END diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h deleted file mode 100644 index 38b8e0d61fbf..000000000000 --- a/arch/arm/mach-h720x/include/mach/boards.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/boards.h - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * - * This file contains the board specific defines for various devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_INCMACH_H -#error Do not include this file directly. Include asm/hardware.h instead ! -#endif - -/* Hynix H7202 developer board specific device defines */ -#ifdef CONFIG_ARCH_H7202 - -/* FLASH */ -#define H720X_FLASH_VIRT 0xd0000000 -#define H720X_FLASH_PHYS 0x00000000 -#define H720X_FLASH_SIZE 0x02000000 - -/* onboard LAN controller */ -# define ETH0_PHYS 0x08000000 - -/* Touch screen defines */ -/* GPIO Port */ -#define PEN_GPIO GPIO_B_VIRT -/* Bitmask for pen down interrupt */ -#define PEN_INT_BIT (1<<7) -/* Bitmask for pen up interrupt */ -#define PEN_ENA_BIT (1<<6) -/* pen up interrupt */ -#define IRQ_PEN IRQ_MUX_GPIOB(7) - -#endif - -/* Hynix H7201 developer board specific device defines */ -#if defined (CONFIG_ARCH_H7201) -/* ROM DISK SPACE */ -#define ROM_DISK_BASE 0xc1800000 -#define ROM_DISK_START 0x41800000 -#define ROM_DISK_SIZE 0x00700000 - -/* SRAM DISK SPACE */ -#define SRAM_DISK_BASE 0xf1000000 -#define SRAM_DISK_START 0x04000000 -#define SRAM_DISK_SIZE 0x00400000 -#endif - diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S deleted file mode 100644 index 8a46157b0582..000000000000 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-h720x/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <mach/hardware.h> - - .equ io_virt, IO_VIRT - .equ io_phys, IO_PHYS - - .macro addruart, rp, rv, tmp - mov \rp, #0x00020000 @ UART1 - add \rv, \rp, #io_virt @ virtual address - add \rp, \rp, #io_phys @ physical base address - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S deleted file mode 100644 index 75267fad7012..000000000000 --- a/arch/arm/mach-h720x/include/mach/entry-macro.S +++ /dev/null @@ -1,57 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Hynix HMS720x based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202) - @ we could use the id register on H7202, but this is not - @ properly updated when we come back from asm_do_irq - @ without a previous return from interrupt - @ (see loops below in irq_svc, irq_usr) - @ We see unmasked pending ints only, as the masked pending ints - @ are not visible here - - mov \base, #0xf0000000 @ base register - orr \base, \base, #0x24000 @ irqbase - ldr \irqstat, [\base, #0x04] @ get interrupt status -#if defined (CONFIG_CPU_H7201) - ldr \tmp, =0x001fffff -#else - mvn \tmp, #0xc0000000 -#endif - and \irqstat, \irqstat, \tmp @ mask out unused ints - mov \irqnr, #0 - - mov \tmp, #0xff00 - orr \tmp, \tmp, #0xff - tst \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr #16 - tst \irqstat, #255 - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr #8 - tst \irqstat, #15 - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr #4 - tst \irqstat, #3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr #2 - tst \irqstat, #1 - addeq \irqnr, \irqnr, #1 - moveq \irqstat, \irqstat, lsr #1 - tst \irqstat, #1 @ bit 0 should be set - .endm - -#else -#error hynix processor selection missmatch -#endif - diff --git a/arch/arm/mach-h720x/include/mach/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h deleted file mode 100644 index 611b4947ccfc..000000000000 --- a/arch/arm/mach-h720x/include/mach/h7201-regs.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/h7201-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_VIRT (IO_VIRT + 0x50100) -#define SERIAL3_VIRT (IO_VIRT + 0x50200) - -/* - * PCMCIA - */ -#define PCMCIA0_ATT_BASE 0xe5000000 -#define PCMCIA0_ATT_SIZE 0x00200000 -#define PCMCIA0_ATT_START 0x20000000 -#define PCMCIA0_MEM_BASE 0xe5200000 -#define PCMCIA0_MEM_SIZE 0x00200000 -#define PCMCIA0_MEM_START 0x24000000 -#define PCMCIA0_IO_BASE 0xe5400000 -#define PCMCIA0_IO_SIZE 0x00200000 -#define PCMCIA0_IO_START 0x28000000 - -#define PCMCIA1_ATT_BASE 0xe5600000 -#define PCMCIA1_ATT_SIZE 0x00200000 -#define PCMCIA1_ATT_START 0x30000000 -#define PCMCIA1_MEM_BASE 0xe5800000 -#define PCMCIA1_MEM_SIZE 0x00200000 -#define PCMCIA1_MEM_START 0x34000000 -#define PCMCIA1_IO_BASE 0xe5a00000 -#define PCMCIA1_IO_SIZE 0x00200000 -#define PCMCIA1_IO_START 0x38000000 - -#define PRIME3C_BASE 0xf0050000 -#define PRIME3C_SIZE 0x00001000 -#define PRIME3C_START 0x10000000 - -/* VGA Controller */ -#define VGA_RAMBASE 0x50 -#define VGA_TIMING0 0x60 -#define VGA_TIMING1 0x64 -#define VGA_TIMING2 0x68 -#define VGA_TIMING3 0x6c - -#define LCD_CTRL_VGA_ENABLE 0x00000100 -#define LCD_CTRL_VGA_BPP_MASK 0x00000600 -#define LCD_CTRL_VGA_4BPP 0x00000000 -#define LCD_CTRL_VGA_8BPP 0x00000200 -#define LCD_CTRL_VGA_16BPP 0x00000300 -#define LCD_CTRL_SHARE_DMA 0x00000800 -#define LCD_CTRL_VDE 0x00100000 -#define LCD_CTRL_LPE 0x00400000 /* LCD Power enable */ -#define LCD_CTRL_BLE 0x00800000 /* LCD backlight enable */ - -#define VGA_PALETTE_BASE (IO_VIRT + 0x10800) diff --git a/arch/arm/mach-h720x/include/mach/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h deleted file mode 100644 index 17c12eb34995..000000000000 --- a/arch/arm/mach-h720x/include/mach/h7202-regs.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/h7202-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_OFS 0x2d000 -#define SERIAL2_BASE (IO_PHYS + SERIAL2_OFS) -#define SERIAL2_VIRT (IO_VIRT + SERIAL2_OFS) -#define SERIAL3_OFS 0x2e000 -#define SERIAL3_BASE (IO_PHYS + SERIAL3_OFS) -#define SERIAL3_VIRT (IO_VIRT + SERIAL3_OFS) - -/* Matrix Keyboard Controller */ -#define KBD_VIRT (IO_VIRT + 0x22000) -#define KBD_KBCR 0x00 -#define KBD_KBSC 0x04 -#define KBD_KBTR 0x08 -#define KBD_KBVR0 0x0C -#define KBD_KBVR1 0x10 -#define KBD_KBSR 0x18 - -#define KBD_KBCR_SCANENABLE (1 << 7) -#define KBD_KBCR_NPOWERDOWN (1 << 2) -#define KBD_KBCR_CLKSEL_MASK (3) -#define KBD_KBCR_CLKSEL_PCLK2 0x0 -#define KBD_KBCR_CLKSEL_PCLK128 0x1 -#define KBD_KBCR_CLKSEL_PCLK256 0x2 -#define KBD_KBCR_CLKSEL_PCLK512 0x3 - -#define KBD_KBSR_INTR (1 << 0) -#define KBD_KBSR_WAKEUP (1 << 1) - -/* USB device controller */ - -#define USBD_BASE (IO_VIRT + 0x12000) -#define USBD_LENGTH 0x3C - -#define USBD_GCTRL 0x00 -#define USBD_EPCTRL 0x04 -#define USBD_INTMASK 0x08 -#define USBD_INTSTAT 0x0C -#define USBD_PWR 0x10 -#define USBD_DMARXTX 0x14 -#define USBD_DEVID 0x18 -#define USBD_DEVCLASS 0x1C -#define USBD_INTCLASS 0x20 -#define USBD_SETUP0 0x24 -#define USBD_SETUP1 0x28 -#define USBD_ENDP0RD 0x2C -#define USBD_ENDP0WT 0x30 -#define USBD_ENDP1RD 0x34 -#define USBD_ENDP2WT 0x38 - -/* PS/2 port */ -#define PSDATA 0x00 -#define PSSTAT 0x04 -#define PSSTAT_TXEMPTY (1<<0) -#define PSSTAT_TXBUSY (1<<1) -#define PSSTAT_RXFULL (1<<2) -#define PSSTAT_RXBUSY (1<<3) -#define PSSTAT_CLKIN (1<<4) -#define PSSTAT_DATAIN (1<<5) -#define PSSTAT_PARITY (1<<6) - -#define PSCONF 0x08 -#define PSCONF_ENABLE (1<<0) -#define PSCONF_TXINTEN (1<<2) -#define PSCONF_RXINTEN (1<<3) -#define PSCONF_FORCECLKLOW (1<<4) -#define PSCONF_FORCEDATLOW (1<<5) -#define PSCONF_LCE (1<<6) - -#define PSINTR 0x0C -#define PSINTR_TXINT (1<<0) -#define PSINTR_RXINT (1<<1) -#define PSINTR_PAR (1<<2) -#define PSINTR_RXTO (1<<3) -#define PSINTR_TXTO (1<<4) - -#define PSTDLO 0x10 /* clk low before start transmission */ -#define PSTPRI 0x14 /* PRI clock */ -#define PSTXMT 0x18 /* maximum transmission time */ -#define PSTREC 0x20 /* maximum receive time */ -#define PSPWDN 0x3c - -/* ADC converter */ -#define ADC_BASE (IO_VIRT + 0x29000) -#define ADC_CR 0x00 -#define ADC_TSCTRL 0x04 -#define ADC_BT_CTRL 0x08 -#define ADC_MC_CTRL 0x0C -#define ADC_STATUS 0x10 - -/* ADC control register bits */ -#define ADC_CR_PW_CTRL 0x80 -#define ADC_CR_DIRECTC 0x04 -#define ADC_CR_CONTIME_NO 0x00 -#define ADC_CR_CONTIME_2 0x04 -#define ADC_CR_CONTIME_4 0x08 -#define ADC_CR_CONTIME_ADE 0x0c -#define ADC_CR_LONGCALTIME 0x01 - -/* ADC touch panel register bits */ -#define ADC_TSCTRL_ENABLE 0x80 -#define ADC_TSCTRL_INTR 0x40 -#define ADC_TSCTRL_SWBYPSS 0x20 -#define ADC_TSCTRL_SWINVT 0x10 -#define ADC_TSCTRL_S400 0x03 -#define ADC_TSCTRL_S200 0x02 -#define ADC_TSCTRL_S100 0x01 -#define ADC_TSCTRL_S50 0x00 - -/* ADC Interrupt Status Register bits */ -#define ADC_STATUS_TS_BIT 0x80 -#define ADC_STATUS_MBT_BIT 0x40 -#define ADC_STATUS_BBT_BIT 0x20 -#define ADC_STATUS_MIC_BIT 0x10 - -/* Touch data registers */ -#define ADC_TS_X0X1 0x30 -#define ADC_TS_X2X3 0x34 -#define ADC_TS_Y0Y1 0x38 -#define ADC_TS_Y2Y3 0x3c -#define ADC_TS_X4X5 0x40 -#define ADC_TS_X6X7 0x44 -#define ADC_TS_Y4Y5 0x48 -#define ADC_TS_Y6Y7 0x50 - -/* battery data */ -#define ADC_MB_DATA 0x54 -#define ADC_BB_DATA 0x58 - -/* Sound data register */ -#define ADC_SD_DAT0 0x60 -#define ADC_SD_DAT1 0x64 -#define ADC_SD_DAT2 0x68 -#define ADC_SD_DAT3 0x6c -#define ADC_SD_DAT4 0x70 -#define ADC_SD_DAT5 0x74 -#define ADC_SD_DAT6 0x78 -#define ADC_SD_DAT7 0x7c diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h deleted file mode 100644 index c55a52c6541d..000000000000 --- a/arch/arm/mach-h720x/include/mach/hardware.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/hardware.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define IOCLK (3686400L) - -/* Onchip peripherals */ - -#define IO_VIRT 0xf0000000 /* IO peripherals */ -#define IO_PHYS 0x80000000 -#define IO_SIZE 0x00050000 - -#ifdef CONFIG_CPU_H7202 -#include "h7202-regs.h" -#elif defined CONFIG_CPU_H7201 -#include "h7201-regs.h" -#else -#error machine definition mismatch -#endif - -/* Macro to access the CPU IO */ -#define CPU_IO(x) (*(volatile u32*)(x)) - -/* Macro to access general purpose regs (base, offset) */ -#define CPU_REG(x,y) CPU_IO(x+y) - -/* Macro to access irq related regs */ -#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x) - -/* CPU registers */ -/* general purpose I/O */ -#define GPIO_VIRT(x) (IO_VIRT + 0x23000 + ((x)<<5)) -#define GPIO_A_VIRT (GPIO_VIRT(0)) -#define GPIO_B_VIRT (GPIO_VIRT(1)) -#define GPIO_C_VIRT (GPIO_VIRT(2)) -#define GPIO_D_VIRT (GPIO_VIRT(3)) -#define GPIO_E_VIRT (GPIO_VIRT(4)) -#define GPIO_AMULSEL (GPIO_VIRT(0) + 0xA4) - -#define AMULSEL_USIN2 (1<<5) -#define AMULSEL_USOUT2 (1<<6) -#define AMULSEL_USIN3 (1<<13) -#define AMULSEL_USOUT3 (1<<14) -#define AMULSEL_IRDIN (1<<15) -#define AMULSEL_IRDOUT (1<<7) - -/* Register offsets general purpose I/O */ -#define GPIO_DATA 0x00 -#define GPIO_DIR 0x04 -#define GPIO_MASK 0x08 -#define GPIO_STAT 0x0C -#define GPIO_EDGE 0x10 -#define GPIO_CLR 0x14 -#define GPIO_POL 0x18 -#define GPIO_EN 0x1C - -/*interrupt controller */ -#define IRQC_VIRT (IO_VIRT + 0x24000) -/* register offset interrupt controller */ -#define IRQC_IER 0x00 -#define IRQC_ISR 0x04 - -/* timer unit */ -#define TIMER_VIRT (IO_VIRT + 0x25000) -/* Register offsets timer unit */ -#define TM0_PERIOD 0x00 -#define TM0_COUNT 0x08 -#define TM0_CTRL 0x10 -#define TM1_PERIOD 0x20 -#define TM1_COUNT 0x28 -#define TM1_CTRL 0x30 -#define TM2_PERIOD 0x40 -#define TM2_COUNT 0x48 -#define TM2_CTRL 0x50 -#define TIMER_TOPCTRL 0x60 -#define TIMER_TOPSTAT 0x64 -#define T64_COUNTL 0x80 -#define T64_COUNTH 0x84 -#define T64_CTRL 0x88 -#define T64_BASEL 0x94 -#define T64_BASEH 0x98 -/* Bitmaks timer unit TOPSTAT reg */ -#define TSTAT_T0INT 0x1 -#define TSTAT_T1INT 0x2 -#define TSTAT_T2INT 0x4 -#define TSTAT_T3INT 0x8 -/* Bit description of TMx_CTRL register */ -#define TM_START 0x1 -#define TM_REPEAT 0x2 -#define TM_RESET 0x4 -/* Bit description of TIMER_CTRL register */ -#define ENABLE_TM0_INTR 0x1 -#define ENABLE_TM1_INTR 0x2 -#define ENABLE_TM2_INTR 0x4 -#define TIMER_ENABLE_BIT 0x8 -#define ENABLE_TIMER64 0x10 -#define ENABLE_TIMER64_INT 0x20 - -/* PMU & PLL */ -#define PMU_BASE (IO_VIRT + 0x1000) -#define PMU_MODE 0x00 -#define PMU_STAT 0x20 -#define PMU_PLL_CTRL 0x28 - -/* PMU Mode bits */ -#define PMU_MODE_SLOW 0x00 -#define PMU_MODE_RUN 0x01 -#define PMU_MODE_IDLE 0x02 -#define PMU_MODE_SLEEP 0x03 -#define PMU_MODE_INIT 0x04 -#define PMU_MODE_DEEPSLEEP 0x07 -#define PMU_MODE_WAKEUP 0x08 - -/* PMU ... */ -#define PLL_2_EN 0x8000 -#define PLL_1_EN 0x4000 -#define PLL_3_MUTE 0x0080 - -/* Control bits for PMU/ PLL */ -#define PMU_WARMRESET 0x00010000 -#define PLL_CTRL_MASK23 0x000080ff - -/* LCD Controller */ -#define LCD_BASE (IO_VIRT + 0x10000) -#define LCD_CTRL 0x00 -#define LCD_STATUS 0x04 -#define LCD_STATUS_M 0x08 -#define LCD_INTERRUPT 0x0C -#define LCD_DBAR 0x10 -#define LCD_DCAR 0x14 -#define LCD_TIMING0 0x20 -#define LCD_TIMING1 0x24 -#define LCD_TIMING2 0x28 -#define LCD_TEST 0x40 - -/* LCD Control Bits */ -#define LCD_CTRL_LCD_ENABLE 0x00000001 -/* Bits per pixel */ -#define LCD_CTRL_LCD_BPP_MASK 0x00000006 -#define LCD_CTRL_LCD_4BPP 0x00000000 -#define LCD_CTRL_LCD_8BPP 0x00000002 -#define LCD_CTRL_LCD_16BPP 0x00000004 -#define LCD_CTRL_LCD_BW 0x00000008 -#define LCD_CTRL_LCD_TFT 0x00000010 -#define LCD_CTRL_BGR 0x00001000 -#define LCD_CTRL_LCD_VCOMP 0x00080000 -#define LCD_CTRL_LCD_MONO8 0x00200000 -#define LCD_CTRL_LCD_PWR 0x00400000 -#define LCD_CTRL_LCD_BLE 0x00800000 -#define LCD_CTRL_LDBUSEN 0x01000000 - -/* Palette */ -#define LCD_PALETTE_BASE (IO_VIRT + 0x10400) - -/* Serial ports */ -#define SERIAL0_OFS 0x20000 -#define SERIAL0_VIRT (IO_VIRT + SERIAL0_OFS) -#define SERIAL0_BASE (IO_PHYS + SERIAL0_OFS) - -#define SERIAL1_OFS 0x21000 -#define SERIAL1_VIRT (IO_VIRT + SERIAL1_OFS) -#define SERIAL1_BASE (IO_PHYS + SERIAL1_OFS) - -#define SERIAL_ENABLE 0x30 -#define SERIAL_ENABLE_EN (1<<0) - -/* General defines to pacify gcc */ - -#define __ASM_ARCH_HARDWARE_INCMACH_H -#include "boards.h" -#undef __ASM_ARCH_HARDWARE_INCMACH_H - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-h720x/include/mach/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h deleted file mode 100644 index 430a92b492f1..000000000000 --- a/arch/arm/mach-h720x/include/mach/irqs.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/irqs.h - * - * Copyright (C) 2000 Jungjun Kim - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#if defined (CONFIG_CPU_H7201) - -#define IRQ_PMU 0 /* 0x000001 */ -#define IRQ_DMA 1 /* 0x000002 */ -#define IRQ_LCD 2 /* 0x000004 */ -#define IRQ_VGA 3 /* 0x000008 */ -#define IRQ_PCMCIA1 4 /* 0x000010 */ -#define IRQ_PCMCIA2 5 /* 0x000020 */ -#define IRQ_AFE 6 /* 0x000040 */ -#define IRQ_AIC 7 /* 0x000080 */ -#define IRQ_KEYBOARD 8 /* 0x000100 */ -#define IRQ_TIMER0 9 /* 0x000200 */ -#define IRQ_RTC 10 /* 0x000400 */ -#define IRQ_SOUND 11 /* 0x000800 */ -#define IRQ_USB 12 /* 0x001000 */ -#define IRQ_IrDA 13 /* 0x002000 */ -#define IRQ_UART0 14 /* 0x004000 */ -#define IRQ_UART1 15 /* 0x008000 */ -#define IRQ_SPI 16 /* 0x010000 */ -#define IRQ_GPIOA 17 /* 0x020000 */ -#define IRQ_GPIOB 18 /* 0x040000 */ -#define IRQ_GPIOC 19 /* 0x080000 */ -#define IRQ_GPIOD 20 /* 0x100000 */ -#define IRQ_CommRX 21 /* 0x200000 */ -#define IRQ_CommTX 22 /* 0x400000 */ -#define IRQ_Soft 23 /* 0x800000 */ - -#define NR_GLBL_IRQS 24 - -#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x) -#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x) -#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x) -#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x) -#define NR_IRQS IRQ_CHAINED_GPIOD(32) - -/* Enable mask for multiplexed interrupts */ -#define IRQ_ENA_MUX (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \ - | (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD) - - -#elif defined (CONFIG_CPU_H7202) - -#define IRQ_PMU 0 /* 0x00000001 */ -#define IRQ_DMA 1 /* 0x00000002 */ -#define IRQ_LCD 2 /* 0x00000004 */ -#define IRQ_SOUND 3 /* 0x00000008 */ -#define IRQ_I2S 4 /* 0x00000010 */ -#define IRQ_USB 5 /* 0x00000020 */ -#define IRQ_MMC 6 /* 0x00000040 */ -#define IRQ_RTC 7 /* 0x00000080 */ -#define IRQ_UART0 8 /* 0x00000100 */ -#define IRQ_UART1 9 /* 0x00000200 */ -#define IRQ_UART2 10 /* 0x00000400 */ -#define IRQ_UART3 11 /* 0x00000800 */ -#define IRQ_KBD 12 /* 0x00001000 */ -#define IRQ_PS2 13 /* 0x00002000 */ -#define IRQ_AIC 14 /* 0x00004000 */ -#define IRQ_TIMER0 15 /* 0x00008000 */ -#define IRQ_TIMERX 16 /* 0x00010000 */ -#define IRQ_WDT 17 /* 0x00020000 */ -#define IRQ_CAN0 18 /* 0x00040000 */ -#define IRQ_CAN1 19 /* 0x00080000 */ -#define IRQ_EXT0 20 /* 0x00100000 */ -#define IRQ_EXT1 21 /* 0x00200000 */ -#define IRQ_GPIOA 22 /* 0x00400000 */ -#define IRQ_GPIOB 23 /* 0x00800000 */ -#define IRQ_GPIOC 24 /* 0x01000000 */ -#define IRQ_GPIOD 25 /* 0x02000000 */ -#define IRQ_GPIOE 26 /* 0x04000000 */ -#define IRQ_COMMRX 27 /* 0x08000000 */ -#define IRQ_COMMTX 28 /* 0x10000000 */ -#define IRQ_SMC 29 /* 0x20000000 */ -#define IRQ_Soft 30 /* 0x40000000 */ -#define IRQ_RESERVED1 31 /* 0x80000000 */ -#define NR_GLBL_IRQS 32 - -#define NR_TIMERX_IRQS 3 - -#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x) -#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x) -#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x) -#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x) -#define IRQ_CHAINED_GPIOE(x) (IRQ_CHAINED_GPIOD(32) + x) -#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x) -#define IRQ_TIMER1 (IRQ_CHAINED_TIMERX(0)) -#define IRQ_TIMER2 (IRQ_CHAINED_TIMERX(1)) -#define IRQ_TIMER64B (IRQ_CHAINED_TIMERX(2)) - -#define NR_IRQS (IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS)) - -/* Enable mask for multiplexed interrupts */ -#define IRQ_ENA_MUX (1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \ - (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \ - (1<<IRQ_TIMERX) - -#else -#error cpu definition mismatch -#endif - -/* decode irq number to register number */ -#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5) -#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32)) - -#endif diff --git a/arch/arm/mach-h720x/include/mach/isa-dma.h b/arch/arm/mach-h720x/include/mach/isa-dma.h deleted file mode 100644 index 3eafb3f163c0..000000000000 --- a/arch/arm/mach-h720x/include/mach/isa-dma.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/isa-dma.h - * - * Architecture DMA routes - * - * Copyright (C) 1997.1998 Russell King - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#if defined (CONFIG_CPU_H7201) -#define MAX_DMA_CHANNELS 3 -#elif defined (CONFIG_CPU_H7202) -#define MAX_DMA_CHANNELS 4 -#else -#error processor definition missmatch -#endif - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h deleted file mode 100644 index 43e343c4b50a..000000000000 --- a/arch/arm/mach-h720x/include/mach/uncompress.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/uncompress.h - * - * Copyright (C) 2001-2002 Jungjun Kim - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/hardware.h> - -#define LSR 0x14 -#define TEMPTY 0x40 - -static inline void putc(int c) -{ - volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000); - - /* wait until transmit buffer is empty */ - while((p[LSR] & TEMPTY) == 0x0) - barrier(); - - /* write next character */ - *p = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#endif diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 44b12f9c1584..cd9fcb1cd7ab 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -12,6 +12,7 @@ config ARCH_HIGHBANK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_SMP select MAILBOX select PL320_MBOX diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c index f30c52843396..a019e4e86e51 100644 --- a/arch/arm/mach-highbank/hotplug.c +++ b/arch/arm/mach-highbank/hotplug.c @@ -14,7 +14,6 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/kernel.h> - #include <asm/cacheflush.h> #include "core.h" @@ -28,13 +27,11 @@ extern void secondary_startup(void); */ void __ref highbank_cpu_die(unsigned int cpu) { - flush_cache_all(); - highbank_set_cpu_jump(cpu, phys_to_virt(0)); - highbank_set_core_pwr(); - cpu_do_idle(); + flush_cache_louis(); + highbank_set_core_pwr(); - /* We should never return from idle */ - panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu); + while (1) + cpu_do_idle(); } diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index 8797a7001720..a984573e0d02 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/smp_scu.h> @@ -25,11 +24,6 @@ extern void secondary_startup(void); -static void __cpuinit highbank_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { highbank_set_cpu_jump(cpu, secondary_startup); @@ -67,7 +61,6 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations highbank_smp_ops __initdata = { .smp_init_cpus = highbank_smp_init_cpus, .smp_prepare_cpus = highbank_smp_prepare_cpus, - .smp_secondary_init = highbank_secondary_init, .smp_boot_secondary = highbank_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = highbank_cpu_die, diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4c9c6f9d2c55..d58ad4ff8d34 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -83,24 +83,12 @@ config ARCH_MXC_IOMUX_V3 config ARCH_MX1 bool -config MACH_MX21 - bool - config ARCH_MX25 bool config MACH_MX27 bool -config ARCH_MX5 - bool - -config ARCH_MX51 - bool - -config ARCH_MX53 - bool - config SOC_IMX1 bool select ARCH_MX1 @@ -114,7 +102,6 @@ config SOC_IMX21 select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 - select MACH_MX21 select MXC_AVIC config SOC_IMX25 @@ -155,7 +142,6 @@ config SOC_IMX35 config SOC_IMX5 bool select ARCH_HAS_CPUFREQ - select ARCH_MX5 select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_V7 @@ -163,8 +149,7 @@ config SOC_IMX5 config SOC_IMX51 bool - select ARCH_MX5 - select ARCH_MX51 + select HAVE_IMX_SRC select PINCTRL select PINCTRL_IMX51 select SOC_IMX5 @@ -789,9 +774,8 @@ comment "Device tree only" config SOC_IMX53 bool "i.MX53 support" - select ARCH_MX5 - select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN + select HAVE_IMX_SRC select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL select PINCTRL_IMX53 @@ -811,7 +795,8 @@ config SOC_IMX6Q select ARM_GIC select COMMON_CLK select CPU_V7 - select HAVE_ARM_SCU + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index c4ce0906d76a..fbe60a145344 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci- obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o imx5-pm-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o @@ -27,10 +27,9 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o ifeq ($(CONFIG_CPU_IDLE),y) -obj-y += cpuidle.o +obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o endif diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot deleted file mode 100644 index 41ba1bb0437b..000000000000 --- a/arch/arm/mach-imx/Makefile.boot +++ /dev/null @@ -1,35 +0,0 @@ -zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000 -params_phys-$(CONFIG_SOC_IMX1) := 0x08000100 -initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000 - -zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000 -params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100 -initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000 - -zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX25) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000 -params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100 -initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000 - -zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX31) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 -params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 -initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 - -zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000 -params_phys-$(CONFIG_SOC_IMX53) := 0x70000100 -initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 - -zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 -params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 -initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 0eff23ed92b9..e163ec7a8441 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -51,11 +51,9 @@ #define AVIC_NUM_IRQS 64 -void __iomem *avic_base; +static void __iomem *avic_base; static struct irq_domain *domain; -static u32 avic_saved_mask_reg[2]; - #ifdef CONFIG_MXC_IRQ_PRIOR static int avic_irq_set_priority(unsigned char irq, unsigned char prio) { @@ -113,6 +111,8 @@ static struct mxc_extra_irq avic_extra_irq = { }; #ifdef CONFIG_PM +static u32 avic_saved_mask_reg[2]; + static void avic_irq_suspend(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 85b728cc27ab..4bb1bc419b79 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -147,7 +147,7 @@ static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index) return ret; } -struct clk_ops clk_busy_mux_ops = { +static struct clk_ops clk_busy_mux_ops = { .get_parent = clk_busy_mux_get_parent, .set_parent = clk_busy_mux_set_parent, }; diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index cc49c7ae186e..a63e415609a8 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/string.h> +#include "clk.h" /** * DOC: basic gatable clock which can gate and ungate it's ouput diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 30b3242a7d49..c3cfa4116dc0 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -86,10 +86,12 @@ enum mx27_clks { }; static struct clk *clk[clk_max]; +static struct clk_onecell_data clk_data; int __init mx27_clocks_init(unsigned long fref) { int i; + struct device_node *np; clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckih] = imx_clk_fixed("ckih", fref); @@ -198,6 +200,13 @@ int __init mx27_clocks_init(unsigned long fref) pr_err("i.MX27 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm"); + if (np) { + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + } + clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0"); clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1"); @@ -276,10 +285,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc"); clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); - clk_register_clkdev(clk[cpu_div], "cpu", NULL); + clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0"); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); - clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1"); mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index e13a8fa5e62c..2193c834f55c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -257,6 +257,7 @@ int __init mx35_clocks_init(void) clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); + clk_register_clkdev(clk[admux_gate], "audmux", NULL); clk_prepare_enable(clk[spba_gate]); clk_prepare_enable(clk[gpio1_gate]); @@ -265,6 +266,7 @@ int __init mx35_clocks_init(void) clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); clk_prepare_enable(clk[max_gate]); + clk_prepare_enable(clk[iomuxc_gate]); /* * SCC is needed to boot via mmc after a watchdog reset. The clock code diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 0f39f8c93b94..2bc623b414c1 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -281,7 +281,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL); clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[cpu_podf], "cpu", NULL); + clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0"); clk_register_clkdev(clk[iim_gate], "iim", NULL); clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1"); @@ -362,9 +362,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL); clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "40000000.ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "40000000.ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "40000000.ipu"); clk_register_clkdev(clk[usb_phy_gate], "phy", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx51.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.0"); @@ -471,10 +468,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "18000000.ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "18000000.ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "18000000.ipu"); - clk_register_clkdev(clk[ipu_gate], "hsp", "18000000.ipu"); clk_register_clkdev(clk[usb_phy1_gate], "usb_phy1", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx53.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.0"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 2f9ff93a4e61..d38e54f5b6d7 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -115,7 +115,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m" static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", }; +static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; @@ -443,7 +443,6 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); - clk_register_clkdev(clk[twd], NULL, "smp_twd"); clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c index abff350ba24c..c1eaee346954 100644 --- a/arch/arm/mach-imx/clk-pllv1.c +++ b/arch/arm/mach-imx/clk-pllv1.c @@ -78,7 +78,7 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw, return ll; } -struct clk_ops clk_pllv1_ops = { +static struct clk_ops clk_pllv1_ops = { .recalc_rate = clk_pllv1_recalc_rate, }; diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c index 0440379e3628..20889d59b44d 100644 --- a/arch/arm/mach-imx/clk-pllv2.c +++ b/arch/arm/mach-imx/clk-pllv2.c @@ -229,7 +229,7 @@ static void clk_pllv2_unprepare(struct clk_hw *hw) __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); } -struct clk_ops clk_pllv2_ops = { +static struct clk_ops clk_pllv2_ops = { .prepare = clk_pllv2_prepare, .unprepare = clk_pllv2_unprepare, .recalc_rate = clk_pllv2_recalc_rate, diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c index f5e8be8e7f11..37e884ed1cd4 100644 --- a/arch/arm/mach-imx/clk.c +++ b/arch/arm/mach-imx/clk.c @@ -1,3 +1,4 @@ #include <linux/spinlock.h> +#include "clk.h" DEFINE_SPINLOCK(imx_ccm_lock); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 5a800bfcec5b..9fea2522d7a3 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -110,8 +110,9 @@ void tzic_handle_irq(struct pt_regs *); extern void imx_enable_cpu(int cpu, bool enable); extern void imx_set_cpu_jump(int cpu, void *jump_addr); +extern u32 imx_get_cpu_arg(int cpu); +extern void imx_set_cpu_arg(int cpu, u32 arg); extern void v7_cpu_resume(void); -extern u32 *pl310_get_save_ptr(void); #ifdef CONFIG_SMP extern void v7_secondary_startup(void); extern void imx_scu_map_io(void); @@ -122,8 +123,6 @@ static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} static inline void imx_scu_standby_enable(void) {} #endif -extern void imx_enable_cpu(int cpu, bool enable); -extern void imx_set_cpu_jump(int cpu, void *jump_addr); extern void imx_src_init(void); extern void imx_src_prepare_restart(void); extern void imx_gpc_init(void); diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index d7ce72252a4e..c1c99a72c6a1 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -18,6 +18,7 @@ #include <linux/io.h> #include "hardware.h" +#include "common.h" static int mx5_cpu_rev = -1; diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 03fcbd082593..e70e3acbf9bd 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -3,6 +3,7 @@ #include <linux/io.h> #include "hardware.h" +#include "common.h" unsigned int __mxc_cpu_type; EXPORT_SYMBOL(__mxc_cpu_type); diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c deleted file mode 100644 index b9ef692b61a2..000000000000 --- a/arch/arm/mach-imx/cpu_op-mx51.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/bug.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include "hardware.h" - -static struct cpu_op mx51_cpu_op[] = { - { - .cpu_rate = 160000000,}, - { - .cpu_rate = 800000000,}, -}; - -struct cpu_op *mx51_get_cpu_op(int *op) -{ - *op = ARRAY_SIZE(mx51_cpu_op); - return mx51_cpu_op; -} diff --git a/arch/arm/mach-imx/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h deleted file mode 100644 index 97477fecb469..000000000000 --- a/arch/arm/mach-imx/cpu_op-mx51.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -extern struct cpu_op *mx51_get_cpu_op(int *op); diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c deleted file mode 100644 index d8c75c3c925d..000000000000 --- a/arch/arm/mach-imx/cpufreq.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/* - * A driver for the Freescale Semiconductor i.MXC CPUfreq module. - * The CPUFREQ driver is for controlling CPU frequency. It allows you to change - * the CPU clock speed on the fly. - */ - -#include <linux/module.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/slab.h> - -#include "hardware.h" - -#define CLK32_FREQ 32768 -#define NANOSECOND (1000 * 1000 * 1000) - -struct cpu_op *(*get_cpu_op)(int *op); - -static int cpu_freq_khz_min; -static int cpu_freq_khz_max; - -static struct clk *cpu_clk; -static struct cpufreq_frequency_table *imx_freq_table; - -static int cpu_op_nr; -static struct cpu_op *cpu_op_tbl; - -static int set_cpu_freq(int freq) -{ - int ret = 0; - int org_cpu_rate; - - org_cpu_rate = clk_get_rate(cpu_clk); - if (org_cpu_rate == freq) - return ret; - - ret = clk_set_rate(cpu_clk, freq); - if (ret != 0) { - printk(KERN_DEBUG "cannot set CPU clock rate\n"); - return ret; - } - - return ret; -} - -static int mxc_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, imx_freq_table); -} - -static unsigned int mxc_get_speed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpu_clk) / 1000; -} - -static int mxc_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - struct cpufreq_freqs freqs; - int freq_Hz; - int ret = 0; - unsigned int index; - - cpufreq_frequency_table_target(policy, imx_freq_table, - target_freq, relation, &index); - freq_Hz = imx_freq_table[index].frequency * 1000; - - freqs.old = clk_get_rate(cpu_clk) / 1000; - freqs.new = freq_Hz / 1000; - freqs.cpu = 0; - freqs.flags = 0; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - ret = set_cpu_freq(freq_Hz); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static int mxc_cpufreq_init(struct cpufreq_policy *policy) -{ - int ret; - int i; - - printk(KERN_INFO "i.MXC CPU frequency driver\n"); - - if (policy->cpu != 0) - return -EINVAL; - - if (!get_cpu_op) - return -EINVAL; - - cpu_clk = clk_get(NULL, "cpu_clk"); - if (IS_ERR(cpu_clk)) { - printk(KERN_ERR "%s: failed to get cpu clock\n", __func__); - return PTR_ERR(cpu_clk); - } - - cpu_op_tbl = get_cpu_op(&cpu_op_nr); - - cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000; - cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000; - - imx_freq_table = kmalloc( - sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1), - GFP_KERNEL); - if (!imx_freq_table) { - ret = -ENOMEM; - goto err1; - } - - for (i = 0; i < cpu_op_nr; i++) { - imx_freq_table[i].index = i; - imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000; - - if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min) - cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000; - - if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max) - cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000; - } - - imx_freq_table[i].index = i; - imx_freq_table[i].frequency = CPUFREQ_TABLE_END; - - policy->cur = clk_get_rate(cpu_clk) / 1000; - policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min; - policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max; - - /* Manual states, that PLL stabilizes in two CLK32 periods */ - policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ; - - ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table); - - if (ret < 0) { - printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n", - __func__, ret); - goto err; - } - - cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu); - return 0; -err: - kfree(imx_freq_table); -err1: - clk_put(cpu_clk); - return ret; -} - -static int mxc_cpufreq_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - - set_cpu_freq(cpu_freq_khz_max * 1000); - clk_put(cpu_clk); - kfree(imx_freq_table); - return 0; -} - -static struct cpufreq_driver mxc_driver = { - .flags = CPUFREQ_STICKY, - .verify = mxc_verify_speed, - .target = mxc_set_target, - .get = mxc_get_speed, - .init = mxc_cpufreq_init, - .exit = mxc_cpufreq_exit, - .name = "imx", -}; - -static int mxc_cpufreq_driver_init(void) -{ - return cpufreq_register_driver(&mxc_driver); -} - -static void mxc_cpufreq_driver_exit(void) -{ - cpufreq_unregister_driver(&mxc_driver); -} - -module_init(mxc_cpufreq_driver_init); -module_exit(mxc_cpufreq_driver_exit); - -MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>"); -MODULE_DESCRIPTION("CPUfreq driver for i.MX"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c new file mode 100644 index 000000000000..5a47e3c6172f --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx5.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/system_misc.h> + +static int imx5_cpuidle_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + arm_pm_idle(); + return index; +} + +static struct cpuidle_driver imx5_cpuidle_driver = { + .name = "imx5_cpuidle", + .owner = THIS_MODULE, + .states[0] = { + .enter = imx5_cpuidle_enter, + .exit_latency = 2, + .target_residency = 1, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IMX5 SRPG", + .desc = "CPU state retained,powered off", + }, + .state_count = 1, +}; + +int __init imx5_cpuidle_init(void) +{ + return cpuidle_register(&imx5_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index d533e2695f0e..23ddfb693b2d 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -6,7 +6,6 @@ * published by the Free Software Foundation. */ -#include <linux/clockchips.h> #include <linux/cpuidle.h> #include <linux/module.h> #include <asm/cpuidle.h> @@ -21,10 +20,6 @@ static DEFINE_SPINLOCK(master_lock); static int imx6q_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - int cpu = dev->cpu; - - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); - if (atomic_inc_return(&master) == num_online_cpus()) { /* * With this lock, we prevent other cpu to exit and enter @@ -43,26 +38,13 @@ idle: cpu_do_idle(); done: atomic_dec(&master); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); return index; } -/* - * For each cpu, setup the broadcast timer because local timer - * stops for the states other than WFI. - */ -static void imx6q_setup_broadcast_timer(void *arg) -{ - int cpu = smp_processor_id(); - - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); -} - static struct cpuidle_driver imx6q_cpuidle_driver = { .name = "imx6q_cpuidle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states = { /* WFI */ ARM_CPUIDLE_WFI_STATE, @@ -70,7 +52,8 @@ static struct cpuidle_driver imx6q_cpuidle_driver = { { .exit_latency = 50, .target_residency = 75, - .flags = CPUIDLE_FLAG_TIME_VALID, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_TIMER_STOP, .enter = imx6q_enter_wait, .name = "WAIT", .desc = "Clock off", @@ -88,8 +71,5 @@ int __init imx6q_cpuidle_init(void) /* Set chicken bit to get a reliable WAIT mode support */ imx6q_set_chicken_bit(); - /* Configure the broadcast timer on each cpu */ - on_each_cpu(imx6q_setup_broadcast_timer, NULL, 1); - - return imx_cpuidle_init(&imx6q_cpuidle_driver); + return cpuidle_register(&imx6q_cpuidle_driver, NULL); } diff --git a/arch/arm/mach-imx/cpuidle.c b/arch/arm/mach-imx/cpuidle.c deleted file mode 100644 index d4cb511a44a8..000000000000 --- a/arch/arm/mach-imx/cpuidle.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2012 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/cpuidle.h> -#include <linux/err.h> -#include <linux/hrtimer.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/slab.h> - -static struct cpuidle_device __percpu * imx_cpuidle_devices; - -static void __init imx_cpuidle_devices_uninit(void) -{ - int cpu_id; - struct cpuidle_device *dev; - - for_each_possible_cpu(cpu_id) { - dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id); - cpuidle_unregister_device(dev); - } - - free_percpu(imx_cpuidle_devices); -} - -int __init imx_cpuidle_init(struct cpuidle_driver *drv) -{ - struct cpuidle_device *dev; - int cpu_id, ret; - - if (drv->state_count > CPUIDLE_STATE_MAX) { - pr_err("%s: state_count exceeds maximum\n", __func__); - return -EINVAL; - } - - ret = cpuidle_register_driver(drv); - if (ret) { - pr_err("%s: Failed to register cpuidle driver with error: %d\n", - __func__, ret); - return ret; - } - - imx_cpuidle_devices = alloc_percpu(struct cpuidle_device); - if (imx_cpuidle_devices == NULL) { - ret = -ENOMEM; - goto unregister_drv; - } - - /* initialize state data for each cpuidle_device */ - for_each_possible_cpu(cpu_id) { - dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id); - dev->cpu = cpu_id; - dev->state_count = drv->state_count; - - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("%s: Failed to register cpu %u, error: %d\n", - __func__, cpu_id, ret); - goto uninit; - } - } - - return 0; - -uninit: - imx_cpuidle_devices_uninit(); - -unregister_drv: - cpuidle_unregister_driver(drv); - return ret; -} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index e092d1359d94..786f98ecc145 100644 --- a/arch/arm/mach-imx/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h @@ -10,18 +10,16 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/cpuidle.h> - #ifdef CONFIG_CPU_IDLE -extern int imx_cpuidle_init(struct cpuidle_driver *drv); +extern int imx5_cpuidle_init(void); extern int imx6q_cpuidle_init(void); #else -static inline int imx_cpuidle_init(struct cpuidle_driver *drv) +static inline int imx5_cpuidle_init(void) { - return -ENODEV; + return 0; } static inline int imx6q_cpuidle_init(void) { - return -ENODEV; + return 0; } #endif diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 9b9ba1f4ffe1..3dd2b1b041d1 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -86,7 +86,3 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX config IMX_HAVE_PLATFORM_SPI_IMX bool - -config IMX_HAVE_PLATFORM_AHCI - bool - default y if ARCH_MX53 diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 6acf37e0c119..67416fb1dc69 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -29,5 +29,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 9bd5777ff0e7..453e20bc2657 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -344,13 +344,3 @@ struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, int irq, int irq_err); struct platform_device *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata); - -#include <linux/ahci_platform.h> -struct imx_ahci_imx_data { - const char *devid; - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_ahci_imx( - const struct imx_ahci_imx_data *data, - const struct ahci_platform_data *pdata); diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c index 1b37482407f9..1b4366a0e7c0 100644 --- a/arch/arm/mach-imx/devices/devices.c +++ b/arch/arm/mach-imx/devices/devices.c @@ -37,7 +37,7 @@ int __init mxc_device_init(void) int ret; ret = device_register(&mxc_aips_bus); - if (IS_ERR_VALUE(ret)) + if (ret < 0) goto done; ret = device_register(&mxc_ahb_bus); diff --git a/arch/arm/mach-imx/devices/platform-ahci-imx.c b/arch/arm/mach-imx/devices/platform-ahci-imx.c deleted file mode 100644 index 3d87dd9c284a..000000000000 --- a/arch/arm/mach-imx/devices/platform-ahci-imx.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <asm/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_ahci_imx_data_entry_single(soc, _devid) \ - { \ - .devid = _devid, \ - .iobase = soc ## _SATA_BASE_ADDR, \ - .irq = soc ## _INT_SATA, \ - } - -#ifdef CONFIG_SOC_IMX53 -const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst = - imx_ahci_imx_data_entry_single(MX53, "imx53-ahci"); -#endif - -enum { - HOST_CAP = 0x00, - HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ - HOST_PORTS_IMPL = 0x0c, - HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ -}; - -static struct clk *sata_clk, *sata_ref_clk; - -/* AHCI module Initialization, if return 0, initialization is successful. */ -static int imx_sata_init(struct device *dev, void __iomem *addr) -{ - u32 tmpdata; - int ret = 0; - struct clk *clk; - - sata_clk = clk_get(dev, "ahci"); - if (IS_ERR(sata_clk)) { - dev_err(dev, "no sata clock.\n"); - return PTR_ERR(sata_clk); - } - ret = clk_prepare_enable(sata_clk); - if (ret) { - dev_err(dev, "can't prepare/enable sata clock.\n"); - goto put_sata_clk; - } - - /* Get the AHCI SATA PHY CLK */ - sata_ref_clk = clk_get(dev, "ahci_phy"); - if (IS_ERR(sata_ref_clk)) { - dev_err(dev, "no sata ref clock.\n"); - ret = PTR_ERR(sata_ref_clk); - goto release_sata_clk; - } - ret = clk_prepare_enable(sata_ref_clk); - if (ret) { - dev_err(dev, "can't prepare/enable sata ref clock.\n"); - goto put_sata_ref_clk; - } - - /* Get the AHB clock rate, and configure the TIMER1MS reg later */ - clk = clk_get(dev, "ahci_dma"); - if (IS_ERR(clk)) { - dev_err(dev, "no dma clock.\n"); - ret = PTR_ERR(clk); - goto release_sata_ref_clk; - } - tmpdata = clk_get_rate(clk) / 1000; - clk_put(clk); - - writel(tmpdata, addr + HOST_TIMER1MS); - - tmpdata = readl(addr + HOST_CAP); - if (!(tmpdata & HOST_CAP_SSS)) { - tmpdata |= HOST_CAP_SSS; - writel(tmpdata, addr + HOST_CAP); - } - - if (!(readl(addr + HOST_PORTS_IMPL) & 0x1)) - writel((readl(addr + HOST_PORTS_IMPL) | 0x1), - addr + HOST_PORTS_IMPL); - - return 0; - -release_sata_ref_clk: - clk_disable_unprepare(sata_ref_clk); -put_sata_ref_clk: - clk_put(sata_ref_clk); -release_sata_clk: - clk_disable_unprepare(sata_clk); -put_sata_clk: - clk_put(sata_clk); - - return ret; -} - -static void imx_sata_exit(struct device *dev) -{ - clk_disable_unprepare(sata_ref_clk); - clk_put(sata_ref_clk); - - clk_disable_unprepare(sata_clk); - clk_put(sata_clk); - -} -struct platform_device *__init imx_add_ahci_imx( - const struct imx_ahci_imx_data *data, - const struct ahci_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device_dmamask(data->devid, 0, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} - -struct platform_device *__init imx53_add_ahci_imx(void) -{ - struct ahci_platform_data pdata = { - .init = imx_sata_init, - .exit = imx_sata_exit, - }; - - return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata); -} diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index b4c70028d359..b2f08bfbbdd3 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -46,7 +46,7 @@ static const int eukrea_mbimx27_pins[] __initconst = { PE10_PF_UART3_CTS, PE11_PF_UART3_RTS, /* UART4 */ -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, @@ -306,7 +306,7 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_uart1(&uart_pdata); imx27_add_imx_uart2(&uart_pdata); -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) imx27_add_imx_uart3(&uart_pdata); #endif diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index a96ccc7f5012..02b61cdf39b9 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -16,6 +16,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/irqchip/arm-gic.h> +#include "common.h" #define GPC_IMR1 0x008 #define GPC_PGC_CPU_PDN 0x2a0 diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 911e9b31b03f..356131f7b591 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -102,7 +102,6 @@ #include "mxc.h" -#include "mx6q.h" #include "mx51.h" #include "mx53.h" #include "mx3x.h" diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 7bc5fe15dda2..5e91112dcbee 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -11,7 +11,6 @@ */ #include <linux/errno.h> -#include <asm/cacheflush.h> #include <asm/cp15.h> #include "common.h" @@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void) { unsigned int v; - flush_cache_all(); asm volatile( "mcr p15, 0, %1, c7, c5, 0\n" " mcr p15, 0, %1, c7, c10, 4\n" @@ -46,11 +44,23 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); + /* + * We use the cpu jumping argument register to sync with + * imx_cpu_kill() which is running on cpu0 and waiting for + * the register being cleared to kill the cpu. + */ + imx_set_cpu_arg(cpu, ~0); cpu_do_idle(); } int imx_cpu_kill(unsigned int cpu) { + unsigned long timeout = jiffies + msecs_to_jiffies(50); + + while (imx_get_cpu_arg(cpu) == 0) + if (time_after(jiffies, timeout)) + return 0; imx_enable_cpu(cpu, false); + imx_set_cpu_arg(cpu, 0); return 1; } diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index c915a490a11c..4aaead0a77ff 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -18,25 +18,13 @@ #include "common.h" #include "mx27.h" -static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL), - OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL), - OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx21-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx21-i2c.1", NULL), - OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL), - OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL), - OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "imx27-nand.0", NULL), - { /* sentinel */ } -}; - static void __init imx27_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - imx27_auxdata_lookup, NULL); + struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + platform_device_register_full(&devinfo); } static const char * const imx27_dt_board_compat[] __initconst = { diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index e2926a8863f8..ab24cc322111 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -21,7 +21,10 @@ static void __init imx51_dt_init(void) { + struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + platform_device_register_full(&devinfo); } static const char *imx51_dt_board_compat[] __initdata = { diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index cabefbc5e7c1..7c66805d2cc0 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -40,7 +40,7 @@ static DEFINE_SPINLOCK(gpio_mux_lock); #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) -unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; +static unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; /* * set the mode for a IOMUX pin. */ diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c index b6e11458e5ae..4b34f52dc46b 100644 --- a/arch/arm/mach-imx/irq-common.c +++ b/arch/arm/mach-imx/irq-common.c @@ -21,25 +21,6 @@ #include "irq-common.h" -int imx_irq_set_priority(unsigned char irq, unsigned char prio) -{ - struct irq_chip_generic *gc; - struct mxc_extra_irq *exirq; - int ret; - - ret = -ENOSYS; - - gc = irq_get_chip_data(irq); - if (gc && gc->private) { - exirq = gc->private; - if (exirq->set_priority) - ret = exirq->set_priority(irq, prio); - } - - return ret; -} -EXPORT_SYMBOL(imx_irq_set_priority); - int mxc_set_irq_fiq(unsigned int irq, unsigned int type) { struct irq_chip_generic *gc; diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 146559311bd2..ea50870bda80 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -48,7 +48,7 @@ static const int eukrea_cpuimx27_pins[] __initconst = { PE14_PF_UART1_CTS, PE15_PF_UART1_RTS, /* UART4 */ -#if defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, @@ -272,7 +272,7 @@ static void __init eukrea_cpuimx27_init(void) /* SDHC2 can be used for Wifi */ imx27_add_mxc_mmc(1, NULL); #endif -#if defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) /* in which case UART4 is also used for Bluetooth */ imx27_add_imx_uart3(&uart_pdata); #endif diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9b7393234f6f..9b5ddf5bbd33 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -33,7 +33,6 @@ #include "common.h" #include "devices-imx51.h" -#include "cpu_op-mx51.h" #include "eukrea-baseboards.h" #include "hardware.h" #include "iomux-mx51.h" @@ -285,10 +284,6 @@ static void __init eukrea_cpuimx51sd_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif - imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); imx51_add_imx2_wdt(0); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index b59ddcb57c78..99502eeefdf7 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -72,7 +72,7 @@ static int imx6q_revision(void) } } -void imx6q_restart(char mode, const char *cmd) +static void imx6q_restart(char mode, const char *cmd) { struct device_node *np; void __iomem *wdog_base; @@ -255,7 +255,7 @@ put_node: of_node_put(np); } -struct platform_device imx6q_cpufreq_pdev = { +static struct platform_device imx6q_cpufreq_pdev = { .name = "imx6q-cpufreq", }; diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index 6c4d7feb4520..f3d264a636fa 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -27,7 +27,6 @@ #include "common.h" #include "devices-imx51.h" -#include "cpu_op-mx51.h" #include "hardware.h" #include "iomux-mx51.h" @@ -371,9 +370,6 @@ static void __init mx51_babbage_init(void) imx51_soc_init(); -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif imx51_babbage_common_init(); imx51_add_imx_uart(0, &uart_pdata); diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index cefa047c4053..e0e69a682174 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -82,7 +82,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size, return __arm_ioremap_caller(phys_addr, size, mtype, caller); } -void __init imx3_init_l2x0(void) +static void __init imx3_init_l2x0(void) { #ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base; diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index cf34994cfe28..b7c4e70e5081 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -84,6 +84,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); + imx_src_init(); } void __init imx53_init_early(void) @@ -91,6 +92,7 @@ void __init imx53_init_early(void) mxc_set_cpu_type(MXC_CPU_MX53); mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); + imx_src_init(); } void __init mx51_init_irq(void) diff --git a/arch/arm/mach-imx/mx6q.h b/arch/arm/mach-imx/mx6q.h deleted file mode 100644 index 19d3f54db5af..000000000000 --- a/arch/arm/mach-imx/mx6q.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __MACH_MX6Q_H__ -#define __MACH_MX6Q_H__ - -#define MX6Q_IO_P2V(x) IMX_IO_P2V(x) -#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x)) - -/* - * The following are the blocks that need to be statically mapped. - * For other blocks, the base address really should be retrieved from - * device tree. - */ -#define MX6Q_SCU_BASE_ADDR 0x00a00000 -#define MX6Q_SCU_SIZE 0x1000 -#define MX6Q_CCM_BASE_ADDR 0x020c4000 -#define MX6Q_CCM_SIZE 0x4000 -#define MX6Q_ANATOP_BASE_ADDR 0x020c8000 -#define MX6Q_ANATOP_SIZE 0x1000 - -#endif /* __MACH_MX6Q_H__ */ diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 7c0b03f67b05..77e9a25ed0f6 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -52,16 +51,6 @@ void imx_scu_standby_enable(void) writel_relaxed(val, scu_base); } -static void __cpuinit imx_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); @@ -96,7 +85,6 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations imx_smp_ops __initdata = { .smp_init_cpus = imx_smp_init_cpus, .smp_prepare_cpus = imx_smp_prepare_cpus, - .smp_secondary_init = imx_secondary_init, .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index f67fd7ee8127..82e79c658eb2 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -149,33 +149,6 @@ static void imx5_pm_idle(void) imx5_cpu_do_idle(); } -static int imx5_cpuidle_enter(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int idx) -{ - int ret; - - ret = imx5_cpu_do_idle(); - if (ret < 0) - return ret; - - return idx; -} - -static struct cpuidle_driver imx5_cpuidle_driver = { - .name = "imx5_cpuidle", - .owner = THIS_MODULE, - .en_core_tk_irqen = 1, - .states[0] = { - .enter = imx5_cpuidle_enter, - .exit_latency = 2, - .target_residency = 1, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "IMX5 SRPG", - .desc = "CPU state retained,powered off", - }, - .state_count = 1, -}; - static int __init imx5_pm_common_init(void) { int ret; @@ -193,8 +166,7 @@ static int __init imx5_pm_common_init(void) /* Set the registers to the default cpu idle state. */ mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE); - imx_cpuidle_init(&imx5_cpuidle_driver); - return 0; + return imx5_cpuidle_init(); } void __init imx51_pm_init(void) diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index e15f1555c59b..97d086889481 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -16,6 +16,7 @@ #include <linux/of_address.h> #include <linux/smp.h> #include <asm/smp_plat.h> +#include "common.h" #define SRC_SCR 0x000 #define SRC_GPR1 0x020 @@ -43,6 +44,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr) src_base + SRC_GPR1 + cpu * 8); } +u32 imx_get_cpu_arg(int cpu) +{ + cpu = cpu_logical_map(cpu); + return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4); +} + +void imx_set_cpu_arg(int cpu, u32 arg) +{ + cpu = cpu_logical_map(cpu); + writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4); +} + void imx_src_prepare_restart(void) { u32 val; @@ -61,7 +74,9 @@ void __init imx_src_init(void) struct device_node *np; u32 val; - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src"); + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-src"); + if (!np) + return; src_base = of_iomap(np, 0); WARN_ON(!src_base); diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 9721161f208f..8183178d5aa3 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -49,7 +49,7 @@ #define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */ #define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ -void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ +static void __iomem *tzic_base; static struct irq_domain *domain; #define TZIC_NUM_IRQS 128 diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 5521d18bf19a..d14d6b76f4c2 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -9,5 +9,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o obj-$(CONFIG_PCI) += pci_v3.o pci.o -obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c deleted file mode 100644 index 590c192cdf4d..000000000000 --- a/arch/arm/mach-integrator/cpu.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/cpu.c - * - * Copyright (C) 2001-2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * CPU support functions - */ -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/cpufreq.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include <asm/mach-types.h> -#include <asm/hardware/icst.h> - -static struct cpufreq_driver integrator_driver; - -#define CM_ID __io_address(INTEGRATOR_HDR_ID) -#define CM_OSC __io_address(INTEGRATOR_HDR_OSC) -#define CM_STAT __io_address(INTEGRATOR_HDR_STAT) -#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK) - -static const struct icst_params lclk_params = { - .ref = 24000000, - .vco_max = ICST525_VCO_MAX_5V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 8, - .vd_max = 132, - .rd_min = 24, - .rd_max = 24, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static const struct icst_params cclk_params = { - .ref = 24000000, - .vco_max = ICST525_VCO_MAX_5V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 12, - .vd_max = 160, - .rd_min = 24, - .rd_max = 24, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -/* - * Validate the speed policy. - */ -static int integrator_verify_policy(struct cpufreq_policy *policy) -{ - struct icst_vco vco; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - vco = icst_hz_to_vco(&cclk_params, policy->max * 1000); - policy->max = icst_hz(&cclk_params, vco) / 1000; - - vco = icst_hz_to_vco(&cclk_params, policy->min * 1000); - policy->min = icst_hz(&cclk_params, vco) / 1000; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - return 0; -} - - -static int integrator_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - cpumask_t cpus_allowed; - int cpu = policy->cpu; - struct icst_vco vco; - struct cpufreq_freqs freqs; - u_int cm_osc; - - /* - * Save this threads cpus_allowed mask. - */ - cpus_allowed = current->cpus_allowed; - - /* - * Bind to the specified CPU. When this call returns, - * we should be running on the right CPU. - */ - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - BUG_ON(cpu != smp_processor_id()); - - /* get current setting */ - cm_osc = __raw_readl(CM_OSC); - - if (machine_is_integrator()) { - vco.s = (cm_osc >> 8) & 7; - } else if (machine_is_cintegrator()) { - vco.s = 1; - } - vco.v = cm_osc & 255; - vco.r = 22; - freqs.old = icst_hz(&cclk_params, vco) / 1000; - - /* icst_hz_to_vco rounds down -- so we need the next - * larger freq in case of CPUFREQ_RELATION_L. - */ - if (relation == CPUFREQ_RELATION_L) - target_freq += 999; - if (target_freq > policy->max) - target_freq = policy->max; - vco = icst_hz_to_vco(&cclk_params, target_freq * 1000); - freqs.new = icst_hz(&cclk_params, vco) / 1000; - - freqs.cpu = policy->cpu; - - if (freqs.old == freqs.new) { - set_cpus_allowed(current, cpus_allowed); - return 0; - } - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - cm_osc = __raw_readl(CM_OSC); - - if (machine_is_integrator()) { - cm_osc &= 0xfffff800; - cm_osc |= vco.s << 8; - } else if (machine_is_cintegrator()) { - cm_osc &= 0xffffff00; - } - cm_osc |= vco.v; - - __raw_writel(0xa05f, CM_LOCK); - __raw_writel(cm_osc, CM_OSC); - __raw_writel(0, CM_LOCK); - - /* - * Restore the CPUs allowed mask. - */ - set_cpus_allowed(current, cpus_allowed); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static unsigned int integrator_get(unsigned int cpu) -{ - cpumask_t cpus_allowed; - unsigned int current_freq; - u_int cm_osc; - struct icst_vco vco; - - cpus_allowed = current->cpus_allowed; - - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - BUG_ON(cpu != smp_processor_id()); - - /* detect memory etc. */ - cm_osc = __raw_readl(CM_OSC); - - if (machine_is_integrator()) { - vco.s = (cm_osc >> 8) & 7; - } else { - vco.s = 1; - } - vco.v = cm_osc & 255; - vco.r = 22; - - current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */ - - set_cpus_allowed(current, cpus_allowed); - - return current_freq; -} - -static int integrator_cpufreq_init(struct cpufreq_policy *policy) -{ - - /* set default policy and cpuinfo */ - policy->cpuinfo.max_freq = 160000; - policy->cpuinfo.min_freq = 12000; - policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */ - policy->cur = policy->min = policy->max = integrator_get(policy->cpu); - - return 0; -} - -static struct cpufreq_driver integrator_driver = { - .verify = integrator_verify_policy, - .target = integrator_set_target, - .get = integrator_get, - .init = integrator_cpufreq_init, - .name = "integrator", -}; - -static int __init integrator_cpu_init(void) -{ - return cpufreq_register_driver(&integrator_driver); -} - -static void __exit integrator_cpu_exit(void) -{ - cpufreq_unregister_driver(&integrator_driver); -} - -MODULE_AUTHOR ("Russell M. King"); -MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs"); -MODULE_LICENSE ("GPL"); - -module_init(integrator_cpu_init); -module_exit(integrator_cpu_exit); diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 1dbeb7c99d58..6600cff6bd92 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -29,6 +29,7 @@ #include <linux/io.h> #include <linux/export.h> #include <linux/gpio.h> +#include <linux/cpu.h> #include <mach/udc.h> #include <mach/hardware.h> @@ -239,7 +240,7 @@ void __init ixp4xx_init_irq(void) * ixp4xx does not implement the XScale PWRMODE register * so it must not call cpu_do_idle(). */ - disable_hlt(); + cpu_idle_poll_ctrl(true); /* Route all sources to IRQ instead of FIQ */ *IXP4XX_ICLR = 0x0; diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c index 0a0df4554d8b..a857163954a5 100644 --- a/arch/arm/mach-kirkwood/board-guruplug.c +++ b/arch/arm/mach-kirkwood/board-guruplug.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" static struct mv643xx_eth_platform_data guruplug_ge00_data = { @@ -24,10 +23,6 @@ static struct mv643xx_eth_platform_data guruplug_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), }; -static struct mvsdio_platform_data guruplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - void __init guruplug_dt_init(void) { /* @@ -35,5 +30,4 @@ void __init guruplug_dt_init(void) */ kirkwood_ge00_init(&guruplug_ge00_data); kirkwood_ge01_init(&guruplug_ge01_data); - kirkwood_sdio_init(&guruplug_mvsdio_data); } diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c index f655b2637b0e..e5f70415905a 100644 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -20,10 +20,15 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { .duplex = DUPLEX_FULL, }; +static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(11), +}; + void __init iomega_ix2_200_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_ge01_init(&iomega_ix2_200_ge00_data); + kirkwood_ge00_init(&iomega_ix2_200_ge00_data); + kirkwood_ge01_init(&iomega_ix2_200_ge01_data); } diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 1c6e736cbbf8..08dd739aa709 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = { static struct mvsdio_platform_data guruplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ + .gpio_card_detect = -1, + .gpio_write_protect = -1, }; static struct gpio_led guruplug_led_pins[] = { diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 8ddd69fdc937..6a6eb548307d 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = { static struct mvsdio_platform_data openrd_mvsdio_data = { .gpio_card_detect = 29, /* MPP29 used as SD card detect */ + .gpio_write_protect = -1, }; static unsigned int openrd_mpp_config[] __initdata = { diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index c7d93b48926b..d24223166e06 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = { static struct mvsdio_platform_data rd88f6281_mvsdio_data = { .gpio_card_detect = 28, + .gpio_write_protect = -1, }; static unsigned int rd88f6281_mpp_config[] __initdata = { diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S deleted file mode 100644 index 0b4e760159b9..000000000000 --- a/arch/arm/mach-l7200/include/mach/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-l7200/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .equ io_virt, IO_BASE - .equ io_phys, IO_START - - .macro addruart, rp, rv, tmp - mov \rp, #0x00044000 @ UART1 -@ mov \rp, #0x00045000 @ UART2 - add \rv, \rp, #io_virt @ virtual address - add \rp, \rp, #io_phys @ physical base address - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 9f64d5632e07..76901f4ce611 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -223,13 +223,7 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = { }; #if defined(CONFIG_USB_EHCI_MV) -static char *pxa168_sph_clock_name[] = { - [0] = "PXA168-USBCLK", -}; - static struct mv_usb_platform_data pxa168_sph_pdata = { - .clknum = 1, - .clkname = pxa168_sph_clock_name, .mode = MV_USB_MODE_HOST, .phy_init = pxa_usb_phy_init, .phy_deinit = pxa_usb_phy_deinit, diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 22a9058f9f4d..6528a5fa6a26 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -162,13 +162,7 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { #ifdef CONFIG_USB_SUPPORT #if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O) -static char *pxa910_usb_clock_name[] = { - [0] = "U2OCLK", -}; - static struct mv_usb_platform_data ttc_usb_pdata = { - .clknum = 1, - .clkname = pxa910_usb_clock_name, .vbus = NULL, .mode = MV_USB_MODE_OTG, .otg_force_a_bus_req = 1, diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index b61908594b47..fceb093b9494 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -44,10 +44,10 @@ endchoice config ARCH_MSM8X60 bool "MSM8X60" - select ARCH_MSM_SCORPIONMP select ARM_GIC select CPU_V7 select GPIO_MSM_V2 + select HAVE_SMP select MSM_GPIOMUX select MSM_SCM if SMP select MSM_V2_TLMM @@ -55,9 +55,9 @@ config ARCH_MSM8X60 config ARCH_MSM8960 bool "MSM8960" - select ARCH_MSM_SCORPIONMP select ARM_GIC select CPU_V7 + select HAVE_SMP select MSM_GPIOMUX select MSM_SCM if SMP select MSM_V2_TLMM @@ -68,9 +68,6 @@ config MSM_HAS_DEBUG_UART_HS config MSM_SOC_REV_A bool -config ARCH_MSM_SCORPIONMP - bool - select HAVE_SMP config ARCH_MSM_ARM11 bool diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 84d720af34ab..82eaf88d2026 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -59,6 +59,7 @@ static struct platform_device smc91x_device = { }; static struct platform_device *devices[] __initdata = { + &msm_device_gpio_7201, &msm_device_uart3, &msm_device_smd, &msm_device_nand, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 7bc3f82e3ec9..520c141acd03 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -89,6 +89,7 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { }; static struct platform_device *devices[] __initdata = { + &msm_device_gpio_7x30, #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) &msm_device_uart2, #endif diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 686e7949a73a..38a532d6937c 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -89,6 +89,7 @@ static struct msm_otg_platform_data msm_otg_pdata = { }; static struct platform_device *devices[] __initdata = { + &msm_device_gpio_8x50, &msm_device_uart3, &msm_device_smd, &msm_device_otg, diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 919bfa32871a..80fe1c5ff5c1 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -36,6 +36,7 @@ extern int trout_init_mmc(unsigned int); static struct platform_device *devices[] __initdata = { + &msm_device_gpio_7201, &msm_device_uart3, &msm_device_smd, &msm_device_nand, diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index f66ee6ea8720..1a0a2306b115 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -29,6 +29,37 @@ #include "clock-pcom.h" #include <linux/platform_data/mmc-msm_sdcc.h> +static struct resource msm_gpio_resources[] = { + { + .start = 32 + 0, + .end = 32 + 0, + .flags = IORESOURCE_IRQ, + }, + { + .start = 32 + 1, + .end = 32 + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0xa9200800, + .end = 0xa9200800 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio1" + }, + { + .start = 0xa9300C00, + .end = 0xa9300C00 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio2" + }, +}; + +struct platform_device msm_device_gpio_7201 = { + .name = "gpio-msm-7201", + .num_resources = ARRAY_SIZE(msm_gpio_resources), + .resource = msm_gpio_resources, +}; + static struct resource resources_uart1[] = { { .start = INT_UART1, diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index e90ab5938c5f..12f482c07740 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -33,6 +33,37 @@ #include <linux/platform_data/mmc-msm_sdcc.h> +static struct resource msm_gpio_resources[] = { + { + .start = 32 + 18, + .end = 32 + 18, + .flags = IORESOURCE_IRQ, + }, + { + .start = 32 + 19, + .end = 32 + 19, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0xac001000, + .end = 0xac001000 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio1" + }, + { + .start = 0xac101400, + .end = 0xac101400 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio2" + }, +}; + +struct platform_device msm_device_gpio_7x30 = { + .name = "gpio-msm-7x30", + .num_resources = ARRAY_SIZE(msm_gpio_resources), + .resource = msm_gpio_resources, +}; + static struct resource resources_uart2[] = { { .start = INT_UART2, diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index 4db61d5fe317..2e1b3ec9dfc7 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -30,6 +30,37 @@ #include <linux/platform_data/mmc-msm_sdcc.h> #include "clock-pcom.h" +static struct resource msm_gpio_resources[] = { + { + .start = 64 + 165 + 9, + .end = 64 + 165 + 9, + .flags = IORESOURCE_IRQ, + }, + { + .start = 64 + 165 + 10, + .end = 64 + 165 + 10, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0xa9000800, + .end = 0xa9000800 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio1" + }, + { + .start = 0xa9100C00, + .end = 0xa9100C00 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio2" + }, +}; + +struct platform_device msm_device_gpio_8x50 = { + .name = "gpio-msm-8x50", + .num_resources = ARRAY_SIZE(msm_gpio_resources), + .resource = msm_gpio_resources, +}; + static struct resource resources_uart3[] = { { .start = INT_UART3, diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h index 9545c196c6e8..da902cf51161 100644 --- a/arch/arm/mach-msm/devices.h +++ b/arch/arm/mach-msm/devices.h @@ -20,6 +20,10 @@ #include "clock.h" +extern struct platform_device msm_device_gpio_7201; +extern struct platform_device msm_device_gpio_7x30; +extern struct platform_device msm_device_gpio_8x50; + extern struct platform_device msm_device_uart1; extern struct platform_device msm_device_uart2; extern struct platform_device msm_device_uart3; diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index 354b91d4c3ac..b279fd8a31b1 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -19,9 +19,35 @@ #include <linux/interrupt.h> #include <linux/completion.h> #include <mach/dma.h> +#include <mach/msm_iomap.h> #define MSM_DMOV_CHANNEL_COUNT 16 +#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) +#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) +#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) +#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) + +#if defined(CONFIG_ARCH_MSM7X30) +#define DMOV_SD_AARM DMOV_SD2 +#else +#define DMOV_SD_AARM DMOV_SD3 +#endif + +#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch) +#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch) +#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch) +#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch) +#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch) +#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch) +#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch) +#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch) + +#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch) +#define DMOV_ISR DMOV_SD_AARM(0x380, 0) + +#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch) + enum { MSM_DMOV_PRINT_ERRORS = 1, MSM_DMOV_PRINT_IO = 2, diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c index 750446feb444..326a87261f9a 100644 --- a/arch/arm/mach-msm/hotplug.c +++ b/arch/arm/mach-msm/hotplug.c @@ -10,16 +10,12 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> #include "common.h" static inline void cpu_enter_lowpower(void) { - /* Just flush the cache. Changing the coherency is not yet - * available on msm. */ - flush_cache_all(); } static inline void cpu_leave_lowpower(void) diff --git a/arch/arm/mach-msm/include/mach/cpu.h b/arch/arm/mach-msm/include/mach/cpu.h deleted file mode 100644 index a9481b08d5c7..000000000000 --- a/arch/arm/mach-msm/include/mach/cpu.h +++ /dev/null @@ -1,54 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef __ARCH_ARM_MACH_MSM_CPU_H__ -#define __ARCH_ARM_MACH_MSM_CPU_H__ - -/* TODO: For now, only one CPU can be compiled at a time. */ - -#define cpu_is_msm7x01() 0 -#define cpu_is_msm7x30() 0 -#define cpu_is_qsd8x50() 0 -#define cpu_is_msm8x60() 0 -#define cpu_is_msm8960() 0 - -#ifdef CONFIG_ARCH_MSM7X00A -# undef cpu_is_msm7x01 -# define cpu_is_msm7x01() 1 -#endif - -#ifdef CONFIG_ARCH_MSM7X30 -# undef cpu_is_msm7x30 -# define cpu_is_msm7x30() 1 -#endif - -#ifdef CONFIG_ARCH_QSD8X50 -# undef cpu_is_qsd8x50 -# define cpu_is_qsd8x50() 1 -#endif - -#ifdef CONFIG_ARCH_MSM8X60 -# undef cpu_is_msm8x60 -# define cpu_is_msm8x60() 1 -#endif - -#ifdef CONFIG_ARCH_MSM8960 -# undef cpu_is_msm8960 -# define cpu_is_msm8960() 1 -#endif - -#endif diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h index 05583f569524..a72d48d42342 100644 --- a/arch/arm/mach-msm/include/mach/dma.h +++ b/arch/arm/mach-msm/include/mach/dma.h @@ -16,7 +16,6 @@ #ifndef __ASM_ARCH_MSM_DMA_H #include <linux/list.h> -#include <mach/msm_iomap.h> struct msm_dmov_errdata { uint32_t flush[6]; @@ -45,48 +44,23 @@ static inline int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; } #endif - -#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) -#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) -#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) -#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) - -#if defined(CONFIG_ARCH_MSM7X30) -#define DMOV_SD_AARM DMOV_SD2 -#else -#define DMOV_SD_AARM DMOV_SD3 -#endif - -#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch) #define DMOV_CMD_LIST (0 << 29) /* does not work */ #define DMOV_CMD_PTR_LIST (1 << 29) /* works */ #define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ #define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ #define DMOV_CMD_ADDR(addr) ((addr) >> 3) -#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch) #define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ #define DMOV_RSLT_ERROR (1 << 3) #define DMOV_RSLT_FLUSH (1 << 2) #define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ #define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ -#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch) -#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch) -#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch) -#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch) -#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch) -#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch) - -#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch) #define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) #define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) #define DMOV_STATUS_RSLT_VALID (1 << 1) #define DMOV_STATUS_CMD_PTR_RDY (1 << 0) -#define DMOV_ISR DMOV_SD_AARM(0x380, 0) - -#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch) #define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) #define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) #define DMOV_CONFIG_IRQ_EN (1 << 0) diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index fa97a10d8695..94324870fb04 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -37,7 +37,7 @@ static void putc(int c) * Wait for TX_READY to be set; but skip it if we have a * TX underrun. */ - if (UART_DM_SR & 0x08) + if (!(UART_DM_SR & 0x08)) while (!(UART_DM_ISR & 0x80)) cpu_relax(); diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c index 1e243f46a969..7777767ee89a 100644 --- a/arch/arm/mach-msm/last_radio_log.c +++ b/arch/arm/mach-msm/last_radio_log.c @@ -31,20 +31,8 @@ extern void *smem_item(unsigned id, unsigned *size); static ssize_t last_radio_log_read(struct file *file, char __user *buf, size_t len, loff_t *offset) { - loff_t pos = *offset; - ssize_t count; - - if (pos >= radio_log_size) - return 0; - - count = min(len, (size_t)(radio_log_size - pos)); - if (copy_to_user(buf, radio_log_base + pos, count)) { - pr_err("%s: copy to user failed\n", __func__); - return -EFAULT; - } - - *offset += count; - return count; + return simple_read_from_buffer(buf, len, offset, + radio_log_base, radio_log_size); } static struct file_operations last_radio_log_fops = { @@ -67,7 +55,8 @@ void msm_init_last_radio_log(struct module *owner) return; } - entry = create_proc_entry("last_radio_log", S_IFREG | S_IRUGO, NULL); + entry = proc_create("last_radio_log", S_IRUGO, NULL, + &last_radio_log_fops); if (!entry) { pr_err("%s: could not create proc entry for radio log\n", __func__); @@ -77,7 +66,6 @@ void msm_init_last_radio_log(struct module *owner) pr_err("%s: last radio log is %d bytes long\n", __func__, radio_log_size); last_radio_log_fops.owner = owner; - entry->proc_fops = &last_radio_log_fops; entry->size = radio_log_size; } EXPORT_SYMBOL(msm_init_last_radio_log); diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 42932865416a..00cdb0a5dac8 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/cputype.h> @@ -42,13 +41,6 @@ static inline int get_core_count(void) static void __cpuinit msm_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 2969027f02fa..284313f3e02c 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -30,19 +30,22 @@ #include "common.h" -#define TIMER_MATCH_VAL 0x0000 -#define TIMER_COUNT_VAL 0x0004 -#define TIMER_ENABLE 0x0008 -#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) -#define TIMER_ENABLE_EN BIT(0) -#define TIMER_CLEAR 0x000C -#define DGT_CLK_CTL_DIV_4 0x3 +#define TIMER_MATCH_VAL 0x0000 +#define TIMER_COUNT_VAL 0x0004 +#define TIMER_ENABLE 0x0008 +#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) +#define TIMER_ENABLE_EN BIT(0) +#define TIMER_CLEAR 0x000C +#define DGT_CLK_CTL 0x10 +#define DGT_CLK_CTL_DIV_4 0x3 +#define TIMER_STS_GPT0_CLR_PEND BIT(10) #define GPT_HZ 32768 #define MSM_DGT_SHIFT 5 static void __iomem *event_base; +static void __iomem *sts_base; static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) { @@ -62,8 +65,16 @@ static int msm_timer_set_next_event(unsigned long cycles, { u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - writel_relaxed(0, event_base + TIMER_CLEAR); + ctrl &= ~TIMER_ENABLE_EN; + writel_relaxed(ctrl, event_base + TIMER_ENABLE); + + writel_relaxed(ctrl, event_base + TIMER_CLEAR); writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); + + if (sts_base) + while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND) + cpu_relax(); + writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); return 0; } @@ -134,9 +145,6 @@ static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt) if (!smp_processor_id()) return 0; - writel_relaxed(0, event_base + TIMER_ENABLE); - writel_relaxed(0, event_base + TIMER_CLEAR); - writel_relaxed(~0, event_base + TIMER_MATCH_VAL); evt->irq = msm_clockevent.irq; evt->name = "local_timer"; evt->features = msm_clockevent.features; @@ -174,9 +182,6 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, struct clocksource *cs = &msm_clocksource; int res; - writel_relaxed(0, event_base + TIMER_ENABLE); - writel_relaxed(0, event_base + TIMER_CLEAR); - writel_relaxed(~0, event_base + TIMER_MATCH_VAL); ce->cpumask = cpumask_of(0); ce->irq = irq; @@ -214,13 +219,9 @@ err: } #ifdef CONFIG_OF -static const struct of_device_id msm_dgt_match[] __initconst = { - { .compatible = "qcom,msm-dgt" }, - { }, -}; - -static const struct of_device_id msm_gpt_match[] __initconst = { - { .compatible = "qcom,msm-gpt" }, +static const struct of_device_id msm_timer_match[] __initconst = { + { .compatible = "qcom,kpss-timer" }, + { .compatible = "qcom,scss-timer" }, { }, }; @@ -231,33 +232,29 @@ void __init msm_dt_timer_init(void) int irq; struct resource res; u32 percpu_offset; - void __iomem *dgt_clk_ctl; + void __iomem *base; + void __iomem *cpu0_base; - np = of_find_matching_node(NULL, msm_gpt_match); + np = of_find_matching_node(NULL, msm_timer_match); if (!np) { - pr_err("Can't find GPT DT node\n"); + pr_err("Can't find msm timer DT node\n"); return; } - event_base = of_iomap(np, 0); - if (!event_base) { + base = of_iomap(np, 0); + if (!base) { pr_err("Failed to map event base\n"); return; } - irq = irq_of_parse_and_map(np, 0); + /* We use GPT0 for the clockevent */ + irq = irq_of_parse_and_map(np, 1); if (irq <= 0) { pr_err("Can't get irq\n"); return; } - of_node_put(np); - - np = of_find_matching_node(NULL, msm_dgt_match); - if (!np) { - pr_err("Can't find DGT DT node\n"); - return; - } + /* We use CPU0's DGT for the clocksource */ if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) percpu_offset = 0; @@ -266,45 +263,43 @@ void __init msm_dt_timer_init(void) return; } - source_base = ioremap(res.start + percpu_offset, resource_size(&res)); - if (!source_base) { + cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res)); + if (!cpu0_base) { pr_err("Failed to map source base\n"); return; } - if (!of_address_to_resource(np, 1, &res)) { - dgt_clk_ctl = ioremap(res.start + percpu_offset, - resource_size(&res)); - if (!dgt_clk_ctl) { - pr_err("Failed to map DGT control base\n"); - return; - } - writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl); - iounmap(dgt_clk_ctl); - } - if (of_property_read_u32(np, "clock-frequency", &freq)) { pr_err("Unknown frequency\n"); return; } of_node_put(np); + event_base = base + 0x4; + sts_base = base + 0x88; + source_base = cpu0_base + 0x24; + freq /= 4; + writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL); + msm_timer_init(freq, 32, irq, !!percpu_offset); } #endif -static int __init msm_timer_map(phys_addr_t event, phys_addr_t source) +static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, + u32 sts) { - event_base = ioremap(event, SZ_64); - if (!event_base) { - pr_err("Failed to map event base\n"); - return 1; - } - source_base = ioremap(source, SZ_64); - if (!source_base) { - pr_err("Failed to map source base\n"); - return 1; + void __iomem *base; + + base = ioremap(addr, SZ_256); + if (!base) { + pr_err("Failed to map timer base\n"); + return -ENOMEM; } + event_base = base + event; + source_base = base + source; + if (sts) + sts_base = base + sts; + return 0; } @@ -312,7 +307,7 @@ void __init msm7x01_timer_init(void) { struct clocksource *cs = &msm_clocksource; - if (msm_timer_map(0xc0100000, 0xc0100010)) + if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0)) return; cs->read = msm_read_timer_count_shift; cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); @@ -323,14 +318,14 @@ void __init msm7x01_timer_init(void) void __init msm7x30_timer_init(void) { - if (msm_timer_map(0xc0100004, 0xc0100024)) + if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80)) return; msm_timer_init(24576000 / 4, 32, 1, false); } void __init qsd8x50_timer_init(void) { - if (msm_timer_map(0xAC100000, 0xAC100010)) + if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34)) return; msm_timer_init(19200000 / 4, 32, 7, false); } diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c index 274ff58271de..830139a3e2ba 100644 --- a/arch/arm/mach-mvebu/irq-armada-370-xp.c +++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c @@ -44,6 +44,8 @@ #define ARMADA_370_XP_MAX_PER_CPU_IRQS (28) +#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5) + #define ACTIVE_DOORBELLS (8) static DEFINE_RAW_SPINLOCK(irq_controller_lock); @@ -55,40 +57,30 @@ static struct irq_domain *armada_370_xp_mpic_domain; /* * In SMP mode: * For shared global interrupts, mask/unmask global enable bit - * For CPU interrtups, mask/unmask the calling CPU's bit + * For CPU interrupts, mask/unmask the calling CPU's bit */ static void armada_370_xp_irq_mask(struct irq_data *d) { -#ifdef CONFIG_SMP irq_hw_number_t hwirq = irqd_to_hwirq(d); - if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) writel(hwirq, main_int_base + ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS); else writel(hwirq, per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS); -#else - writel(irqd_to_hwirq(d), - per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS); -#endif } static void armada_370_xp_irq_unmask(struct irq_data *d) { -#ifdef CONFIG_SMP irq_hw_number_t hwirq = irqd_to_hwirq(d); - if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) writel(hwirq, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); else writel(hwirq, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -#else - writel(irqd_to_hwirq(d), - per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -#endif } #ifdef CONFIG_SMP @@ -144,10 +136,14 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { armada_370_xp_irq_mask(irq_get_irq_data(virq)); - writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); + if (hw != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) + writel(hw, per_cpu_int_base + + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); + else + writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); irq_set_status_flags(virq, IRQ_LEVEL); - if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) { + if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) { irq_set_percpu_devid(virq); irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, handle_percpu_devid_irq); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ecc431909d6f..4dc2fbba0ecd 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -1,8 +1,7 @@ -if ARCH_MXS - config SOC_IMX23 bool select ARM_AMBA + select ARM_CPU_SUSPEND if PM select CPU_ARM926T select HAVE_PWM select PINCTRL_IMX23 @@ -10,19 +9,24 @@ config SOC_IMX23 config SOC_IMX28 bool select ARM_AMBA + select ARM_CPU_SUSPEND if PM select CPU_ARM926T select HAVE_CAN_FLEXCAN if CAN select HAVE_PWM select PINCTRL_IMX28 -comment "MXS platforms:" - -config MACH_MXS_DT - bool "Support MXS platforms from device tree" +config ARCH_MXS + bool "Freescale MXS (i.MX23, i.MX28) support" + depends on ARCH_MULTI_V5 + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select HAVE_CLK_PREPARE + select PINCTRL select SOC_IMX23 select SOC_IMX28 + select STMP_DEVICE help - Include support for Freescale MXS platforms(i.MX23 and i.MX28) - using the device tree for discovery - -endif + Support for Freescale MXS-based family of processors diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 3d3c8a973062..cc2bf6748ade 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,6 +1,2 @@ -# Common support -obj-y := icoll.o ocotp.o system.o timer.o mm.o - obj-$(CONFIG_PM) += pm.o - -obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o +obj-$(CONFIG_ARCH_MXS) += mach-mxs.o diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot deleted file mode 100644 index 07b11fe6453f..000000000000 --- a/arch/arm/mach-mxs/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ -zreladdr-y += 0x40008000 diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c deleted file mode 100644 index e26eeba46598..000000000000 --- a/arch/arm/mach-mxs/icoll.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <asm/exception.h> -#include <mach/mxs.h> -#include <mach/common.h> - -#define HW_ICOLL_VECTOR 0x0000 -#define HW_ICOLL_LEVELACK 0x0010 -#define HW_ICOLL_CTRL 0x0020 -#define HW_ICOLL_STAT_OFFSET 0x0070 -#define HW_ICOLL_INTERRUPTn_SET(n) (0x0124 + (n) * 0x10) -#define HW_ICOLL_INTERRUPTn_CLR(n) (0x0128 + (n) * 0x10) -#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004 -#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1 - -#define ICOLL_NUM_IRQS 128 - -static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR); -static struct irq_domain *icoll_domain; - -static void icoll_ack_irq(struct irq_data *d) -{ - /* - * The Interrupt Collector is able to prioritize irqs. - * Currently only level 0 is used. So acking can use - * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally. - */ - __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0, - icoll_base + HW_ICOLL_LEVELACK); -} - -static void icoll_mask_irq(struct irq_data *d) -{ - __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, - icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq)); -} - -static void icoll_unmask_irq(struct irq_data *d) -{ - __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, - icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq)); -} - -static struct irq_chip mxs_icoll_chip = { - .irq_ack = icoll_ack_irq, - .irq_mask = icoll_mask_irq, - .irq_unmask = icoll_unmask_irq, -}; - -asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs) -{ - u32 irqnr; - - do { - irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET); - if (irqnr != 0x7f) { - __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR); - irqnr = irq_find_mapping(icoll_domain, irqnr); - handle_IRQ(irqnr, regs); - continue; - } - break; - } while (1); -} - -static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq); - set_irq_flags(virq, IRQF_VALID); - - return 0; -} - -static struct irq_domain_ops icoll_irq_domain_ops = { - .map = icoll_irq_domain_map, - .xlate = irq_domain_xlate_onecell, -}; - -static void __init icoll_of_init(struct device_node *np, - struct device_node *interrupt_parent) -{ - /* - * Interrupt Collector reset, which initializes the priority - * for each irq to level 0. - */ - mxs_reset_block(icoll_base + HW_ICOLL_CTRL); - - icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS, - &icoll_irq_domain_ops, NULL); - WARN_ON(!icoll_domain); -} - -static const struct of_device_id icoll_of_match[] __initconst = { - {.compatible = "fsl,icoll", .data = icoll_of_init}, - { /* sentinel */ } -}; - -void __init icoll_init_irq(void) -{ - of_irq_init(icoll_of_match); -} diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h deleted file mode 100644 index be5a9c93cb2a..000000000000 --- a/arch/arm/mach-mxs/include/mach/common.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MXS_COMMON_H__ -#define __MACH_MXS_COMMON_H__ - -extern const u32 *mxs_get_ocotp(void); -extern int mxs_reset_block(void __iomem *); -extern void mxs_timer_init(void); -extern void mxs_restart(char, const char *); -extern int mxs_saif_clkmux_select(unsigned int clkmux); - -extern int mx23_clocks_init(void); -extern void mx23_map_io(void); - -extern int mx28_clocks_init(void); -extern void mx28_map_io(void); - -extern void icoll_init_irq(void); -extern void icoll_handle_irq(struct pt_regs *); - -#endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h deleted file mode 100644 index 17964066303f..000000000000 --- a/arch/arm/mach-mxs/include/mach/digctl.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_DIGCTL_H__ -#define __MACH_DIGCTL_H__ - -/* MXS DIGCTL SAIF CLKMUX */ -#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 -#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 - -#define HW_DIGCTL_CTRL 0x0 -#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 -#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) -#define HW_DIGCTL_CHIPID 0x310 -#endif diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h deleted file mode 100644 index 4c0e8a64d8c7..000000000000 --- a/arch/arm/mach-mxs/include/mach/hardware.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MXS_HARDWARE_H__ -#define __MACH_MXS_HARDWARE_H__ - -#endif /* __MACH_MXS_HARDWARE_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h deleted file mode 100644 index 599094bc99de..000000000000 --- a/arch/arm/mach-mxs/include/mach/mx23.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX23_H__ -#define __MACH_MX23_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX23_OCRAM_BASE_ADDR 0x00000000 -#define MX23_OCRAM_SIZE SZ_32K - -/* - * IO - */ -#define MX23_IO_BASE_ADDR 0x80000000 -#define MX23_IO_SIZE SZ_1M - -#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000) -#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000) -#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000) -#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000) -#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000) -#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000) -#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000) -#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000) -#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000) -#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000) -#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000) -#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000) -#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000) -#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000) -#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000) -#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000) -#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000) -#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000) -#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000) -#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000) -#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000) -#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000) -#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000) -#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000) -#define MX23_I2C_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000) -#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000) -#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000) -#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000) -#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000) -#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000) -#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000) -#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000) -#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000) -#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000) - -#define MX23_IO_P2V(x) MXS_IO_P2V(x) -#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x)) - -/* - * IRQ - */ -#define MX23_INT_DUART 0 -#define MX23_INT_COMMS_RX 1 -#define MX23_INT_COMMS_TX 1 -#define MX23_INT_SSP2_ERROR 2 -#define MX23_INT_VDD5V 3 -#define MX23_INT_HEADPHONE_SHORT 4 -#define MX23_INT_DAC_DMA 5 -#define MX23_INT_DAC_ERROR 6 -#define MX23_INT_ADC_DMA 7 -#define MX23_INT_ADC_ERROR 8 -#define MX23_INT_SPDIF_DMA 9 -#define MX23_INT_SAIF2_DMA 9 -#define MX23_INT_SPDIF_ERROR 10 -#define MX23_INT_SAIF1_IRQ 10 -#define MX23_INT_SAIF2_IRQ 10 -#define MX23_INT_USB_CTRL 11 -#define MX23_INT_USB_WAKEUP 12 -#define MX23_INT_GPMI_DMA 13 -#define MX23_INT_SSP1_DMA 14 -#define MX23_INT_SSP1_ERROR 15 -#define MX23_INT_GPIO0 16 -#define MX23_INT_GPIO1 17 -#define MX23_INT_GPIO2 18 -#define MX23_INT_SAIF1_DMA 19 -#define MX23_INT_SSP2_DMA 20 -#define MX23_INT_ECC8_IRQ 21 -#define MX23_INT_RTC_ALARM 22 -#define MX23_INT_AUART1_TX_DMA 23 -#define MX23_INT_AUART1 24 -#define MX23_INT_AUART1_RX_DMA 25 -#define MX23_INT_I2C_DMA 26 -#define MX23_INT_I2C_ERROR 27 -#define MX23_INT_TIMER0 28 -#define MX23_INT_TIMER1 29 -#define MX23_INT_TIMER2 30 -#define MX23_INT_TIMER3 31 -#define MX23_INT_BATT_BRNOUT 32 -#define MX23_INT_VDDD_BRNOUT 33 -#define MX23_INT_VDDIO_BRNOUT 34 -#define MX23_INT_VDD18_BRNOUT 35 -#define MX23_INT_TOUCH_DETECT 36 -#define MX23_INT_LRADC_CH0 37 -#define MX23_INT_LRADC_CH1 38 -#define MX23_INT_LRADC_CH2 39 -#define MX23_INT_LRADC_CH3 40 -#define MX23_INT_LRADC_CH4 41 -#define MX23_INT_LRADC_CH5 42 -#define MX23_INT_LRADC_CH6 43 -#define MX23_INT_LRADC_CH7 44 -#define MX23_INT_LCDIF_DMA 45 -#define MX23_INT_LCDIF_ERROR 46 -#define MX23_INT_DIGCTL_DEBUG_TRAP 47 -#define MX23_INT_RTC_1MSEC 48 -#define MX23_INT_DRI_DMA 49 -#define MX23_INT_DRI_ATTENTION 50 -#define MX23_INT_GPMI_ATTENTION 51 -#define MX23_INT_IR 52 -#define MX23_INT_DCP_VMI 53 -#define MX23_INT_DCP 54 -#define MX23_INT_BCH 56 -#define MX23_INT_PXP 57 -#define MX23_INT_AUART2_TX_DMA 58 -#define MX23_INT_AUART2 59 -#define MX23_INT_AUART2_RX_DMA 60 -#define MX23_INT_VDAC_DETECT 61 -#define MX23_INT_VDD5V_DROOP 64 -#define MX23_INT_DCDC4P2_BO 65 - -/* - * APBH DMA - */ -#define MX23_DMA_SSP1 1 -#define MX23_DMA_SSP2 2 -#define MX23_DMA_GPMI0 4 -#define MX23_DMA_GPMI1 5 -#define MX23_DMA_GPMI2 6 -#define MX23_DMA_GPMI3 7 - -/* - * APBX DMA - */ -#define MX23_DMA_ADC 0 -#define MX23_DMA_DAC 1 -#define MX23_DMA_SPDIF 2 -#define MX23_DMA_I2C 3 -#define MX23_DMA_SAIF0 4 -#define MX23_DMA_UART0_RX 6 -#define MX23_DMA_UART0_TX 7 -#define MX23_DMA_UART1_RX 8 -#define MX23_DMA_UART1_TX 9 -#define MX23_DMA_SAIF1 10 - -#endif /* __MACH_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h deleted file mode 100644 index 30c7990f3c01..000000000000 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX28_H__ -#define __MACH_MX28_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX28_OCRAM_BASE_ADDR 0x00000000 -#define MX28_OCRAM_SIZE SZ_128K - -/* - * IO - */ -#define MX28_IO_BASE_ADDR 0x80000000 -#define MX28_IO_SIZE SZ_1M - -#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000) -#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000) -#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000) -#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000) -#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000) -#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000) -#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000) -#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000) -#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000) -#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000) -#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000) -#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000) -#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000) -#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000) -#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000) -#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000) -#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000) -#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000) -#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000) -#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000) -#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000) -#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000) -#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200) -#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300) -#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400) -#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500) -#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700) -#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800) -#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000) -#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000) -#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000) -#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000) -#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000) -#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000) -#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000) -#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000) -#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000) -#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000) -#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000) -#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000) -#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000) -#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000) -#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000) -#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000) -#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000) -#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000) -#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000) -#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000) -#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000) -#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000) -#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000) -#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000) -#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000) - -#define MX28_IO_P2V(x) MXS_IO_P2V(x) -#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x)) - -/* - * IRQ - */ -#define MX28_INT_BATT_BRNOUT 0 -#define MX28_INT_VDDD_BRNOUT 1 -#define MX28_INT_VDDIO_BRNOUT 2 -#define MX28_INT_VDDA_BRNOUT 3 -#define MX28_INT_VDD5V_DROOP 4 -#define MX28_INT_DCDC4P2_BRNOUT 5 -#define MX28_INT_VDD5V 6 -#define MX28_INT_CAN0 8 -#define MX28_INT_CAN1 9 -#define MX28_INT_LRADC_TOUCH 10 -#define MX28_INT_HSADC 13 -#define MX28_INT_LRADC_THRESH0 14 -#define MX28_INT_LRADC_THRESH1 15 -#define MX28_INT_LRADC_CH0 16 -#define MX28_INT_LRADC_CH1 17 -#define MX28_INT_LRADC_CH2 18 -#define MX28_INT_LRADC_CH3 19 -#define MX28_INT_LRADC_CH4 20 -#define MX28_INT_LRADC_CH5 21 -#define MX28_INT_LRADC_CH6 22 -#define MX28_INT_LRADC_CH7 23 -#define MX28_INT_LRADC_BUTTON0 24 -#define MX28_INT_LRADC_BUTTON1 25 -#define MX28_INT_PERFMON 27 -#define MX28_INT_RTC_1MSEC 28 -#define MX28_INT_RTC_ALARM 29 -#define MX28_INT_COMMS 31 -#define MX28_INT_EMI_ERR 32 -#define MX28_INT_LCDIF 38 -#define MX28_INT_PXP 39 -#define MX28_INT_BCH 41 -#define MX28_INT_GPMI 42 -#define MX28_INT_SPDIF_ERROR 45 -#define MX28_INT_DUART 47 -#define MX28_INT_TIMER0 48 -#define MX28_INT_TIMER1 49 -#define MX28_INT_TIMER2 50 -#define MX28_INT_TIMER3 51 -#define MX28_INT_DCP_VMI 52 -#define MX28_INT_DCP 53 -#define MX28_INT_DCP_SECURE 54 -#define MX28_INT_SAIF1 58 -#define MX28_INT_SAIF0 59 -#define MX28_INT_SPDIF_DMA 66 -#define MX28_INT_I2C0_DMA 68 -#define MX28_INT_I2C1_DMA 69 -#define MX28_INT_AUART0_RX_DMA 70 -#define MX28_INT_AUART0_TX_DMA 71 -#define MX28_INT_AUART1_RX_DMA 72 -#define MX28_INT_AUART1_TX_DMA 73 -#define MX28_INT_AUART2_RX_DMA 74 -#define MX28_INT_AUART2_TX_DMA 75 -#define MX28_INT_AUART3_RX_DMA 76 -#define MX28_INT_AUART3_TX_DMA 77 -#define MX28_INT_AUART4_RX_DMA 78 -#define MX28_INT_AUART4_TX_DMA 79 -#define MX28_INT_SAIF0_DMA 80 -#define MX28_INT_SAIF1_DMA 81 -#define MX28_INT_SSP0_DMA 82 -#define MX28_INT_SSP1_DMA 83 -#define MX28_INT_SSP2_DMA 84 -#define MX28_INT_SSP3_DMA 85 -#define MX28_INT_LCDIF_DMA 86 -#define MX28_INT_HSADC_DMA 87 -#define MX28_INT_GPMI_DMA 88 -#define MX28_INT_DIGCTL_DEBUG_TRAP 89 -#define MX28_INT_USB1 92 -#define MX28_INT_USB0 93 -#define MX28_INT_USB1_WAKEUP 94 -#define MX28_INT_USB0_WAKEUP 95 -#define MX28_INT_SSP0_ERROR 96 -#define MX28_INT_SSP1_ERROR 97 -#define MX28_INT_SSP2_ERROR 98 -#define MX28_INT_SSP3_ERROR 99 -#define MX28_INT_ENET_SWI 100 -#define MX28_INT_ENET_MAC0 101 -#define MX28_INT_ENET_MAC1 102 -#define MX28_INT_ENET_MAC0_1588 103 -#define MX28_INT_ENET_MAC1_1588 104 -#define MX28_INT_I2C1_ERROR 110 -#define MX28_INT_I2C0_ERROR 111 -#define MX28_INT_AUART0 112 -#define MX28_INT_AUART1 113 -#define MX28_INT_AUART2 114 -#define MX28_INT_AUART3 115 -#define MX28_INT_AUART4 116 -#define MX28_INT_GPIO4 123 -#define MX28_INT_GPIO3 124 -#define MX28_INT_GPIO2 125 -#define MX28_INT_GPIO1 126 -#define MX28_INT_GPIO0 127 - -/* - * APBH DMA - */ -#define MX28_DMA_SSP0 0 -#define MX28_DMA_SSP1 1 -#define MX28_DMA_SSP2 2 -#define MX28_DMA_SSP3 3 -#define MX28_DMA_GPMI0 4 -#define MX28_DMA_GPMI1 5 -#define MX28_DMA_GPMI2 6 -#define MX28_DMA_GPMI3 7 -#define MX28_DMA_GPMI4 8 -#define MX28_DMA_GPMI5 9 -#define MX28_DMA_GPMI6 10 -#define MX28_DMA_GPMI7 11 -#define MX28_DMA_HSADC 12 -#define MX28_DMA_LCDIF 13 - -/* - * APBX DMA - */ -#define MX28_DMA_AUART4_RX 0 -#define MX28_DMA_AUART4_TX 1 -#define MX28_DMA_SPDIF_TX 2 -#define MX28_DMA_SAIF0 4 -#define MX28_DMA_SAIF1 5 -#define MX28_DMA_I2C0 6 -#define MX28_DMA_I2C1 7 -#define MX28_DMA_AUART0_RX 8 -#define MX28_DMA_AUART0_TX 9 -#define MX28_DMA_AUART1_RX 10 -#define MX28_DMA_AUART1_TX 11 -#define MX28_DMA_AUART2_RX 12 -#define MX28_DMA_AUART2_TX 13 -#define MX28_DMA_AUART3_RX 14 -#define MX28_DMA_AUART3_TX 15 - -#endif /* __MACH_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h deleted file mode 100644 index 7d4fb6d0afda..000000000000 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MXS_H__ -#define __MACH_MXS_H__ - -#ifndef __ASSEMBLER__ -#include <linux/io.h> -#endif -#include <asm/mach-types.h> -#include <mach/digctl.h> -#include <mach/hardware.h> - -/* - * IO addresses common to MXS-based - */ -#define MXS_IO_BASE_ADDR 0x80000000 -#define MXS_IO_SIZE SZ_1M - -#define MXS_ICOLL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x000000) -#define MXS_APBH_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x004000) -#define MXS_BCH_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00a000) -#define MXS_GPMI_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00c000) -#define MXS_PINCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x018000) -#define MXS_DIGCTL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x01c000) -#define MXS_APBX_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x024000) -#define MXS_DCP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x028000) -#define MXS_PXP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02a000) -#define MXS_OCOTP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02c000) -#define MXS_AXI_AHB0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02e000) -#define MXS_LCDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x030000) -#define MXS_CLKCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x040000) -#define MXS_SAIF0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x042000) -#define MXS_POWER_BASE_ADDR (MXS_IO_BASE_ADDR + 0x044000) -#define MXS_SAIF1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x046000) -#define MXS_LRADC_BASE_ADDR (MXS_IO_BASE_ADDR + 0x050000) -#define MXS_SPDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x054000) -#define MXS_I2C0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x058000) -#define MXS_PWM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x064000) -#define MXS_TIMROT_BASE_ADDR (MXS_IO_BASE_ADDR + 0x068000) -#define MXS_AUART1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06c000) -#define MXS_AUART2_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06e000) -#define MXS_DRAM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x0e0000) - -/* - * It maps the whole address space to [0xf4000000, 0xf50fffff]. - * - * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000 - * IO 0x80000000+0x100000 -> 0xf5000000+0x100000 - */ -#define MXS_IO_P2V(x) (0xf4000000 + \ - (((x) & 0x80000000) >> 7) + \ - (((x) & 0x000fffff))) - -#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x)) - -#define mxs_map_entry(soc, name, _type) { \ - .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ - .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ - .length = soc ## _ ## name ## _SIZE, \ - .type = _type, \ -} - -#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) - -#define MXS_SET_ADDR 0x4 -#define MXS_CLR_ADDR 0x8 -#define MXS_TOG_ADDR 0xc - -#ifndef __ASSEMBLER__ -static inline void __mxs_setl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_SET_ADDR); -} - -static inline void __mxs_clrl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_CLR_ADDR); -} - -static inline void __mxs_togl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_TOG_ADDR); -} - -/* - * MXS CPU types - */ -#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) - -static inline int cpu_is_mx23(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); -} - -static inline int cpu_is_mx28(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); -} -#endif - -#endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/timex.h b/arch/arm/mach-mxs/include/mach/timex.h deleted file mode 100644 index 734ce8984a64..000000000000 --- a/arch/arm/mach-mxs/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MXS_TIMEX_H__ -#define __MACH_MXS_TIMEX_H__ - -#define CLOCK_TICK_RATE 32000 /* 32K */ - -#endif /* __MACH_MXS_TIMEX_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h deleted file mode 100644 index 533f5186e200..000000000000 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * arch/arm/mach-mxs/include/mach/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_MXS_UNCOMPRESS_H__ -#define __MACH_MXS_UNCOMPRESS_H__ - -unsigned long mxs_duart_base; - -#define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) - -#define MXS_DUART_DR 0x00 -#define MXS_DUART_FR 0x18 -#define MXS_DUART_FR_TXFE (1 << 7) -#define MXS_DUART_CR 0x30 -#define MXS_DUART_CR_UARTEN (1 << 0) - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. If it's not, the output is - * simply discarded. - */ - -static void putc(int ch) -{ - if (!mxs_duart_base) - return; - if (!(MXS_DUART(MXS_DUART_CR) & MXS_DUART_CR_UARTEN)) - return; - - while (!(MXS_DUART(MXS_DUART_FR) & MXS_DUART_FR_TXFE)) - barrier(); - - MXS_DUART(MXS_DUART_DR) = ch; -} - -static inline void flush(void) -{ -} - -#define MX23_DUART_BASE_ADDR 0x80070000 -#define MX28_DUART_BASE_ADDR 0x80074000 -#define MXS_DIGCTL_CHIPID 0x8001c310 - -static inline void __arch_decomp_setup(unsigned long arch_id) -{ - u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16; - - switch (chipid) { - case 0x3780: - mxs_duart_base = MX23_DUART_BASE_ADDR; - break; - case 0x2800: - mxs_duart_base = MX28_DUART_BASE_ADDR; - break; - default: - break; - } -} - -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - -#endif /* __MACH_MXS_UNCOMPRESS_H__ */ diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index e7b781d3788f..b5c1bdd3dcdf 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -11,22 +11,55 @@ */ #include <linux/clk.h> +#include <linux/clk/mxs.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/can/platform/flexcan.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> +#include <linux/irqchip.h> +#include <linux/irqchip/mxs.h> #include <linux/micrel_phy.h> #include <linux/mxsfb.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/pinctrl/consumer.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/digctl.h> -#include <mach/mxs.h> +#include <asm/system_misc.h> + +#include "pm.h" + +/* MXS DIGCTL SAIF CLKMUX */ +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 + +#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) + +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 +#define MXS_TOG_ADDR 0xc + +static inline void __mxs_setl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_SET_ADDR); +} + +static inline void __mxs_clrl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_CLR_ADDR); +} + +static inline void __mxs_togl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_TOG_ADDR); +} static struct fb_videomode mx23evk_video_modes[] = { { @@ -165,14 +198,80 @@ static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { { /* sentinel */ } }; -static void __init imx23_timer_init(void) -{ - mx23_clocks_init(); -} +#define OCOTP_WORD_OFFSET 0x20 +#define OCOTP_WORD_COUNT 0x20 + +#define BM_OCOTP_CTRL_BUSY (1 << 8) +#define BM_OCOTP_CTRL_ERROR (1 << 9) +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) -static void __init imx28_timer_init(void) +static DEFINE_MUTEX(ocotp_mutex); +static u32 ocotp_words[OCOTP_WORD_COUNT]; + +static const u32 *mxs_get_ocotp(void) { - mx28_clocks_init(); + struct device_node *np; + void __iomem *ocotp_base; + int timeout = 0x400; + size_t i; + static int once; + + if (once) + return ocotp_words; + + np = of_find_compatible_node(NULL, NULL, "fsl,ocotp"); + ocotp_base = of_iomap(np, 0); + WARN_ON(!ocotp_base); + + mutex_lock(&ocotp_mutex); + + /* + * clk_enable(hbus_clk) for ocotp can be skipped + * as it must be on when system is running. + */ + + /* try to clear ERROR bit */ + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); + + /* check both BUSY and ERROR cleared */ + while ((__raw_readl(ocotp_base) & + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + /* open OCOTP banks for read */ + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + /* approximately wait 32 hclk cycles */ + udelay(1); + + /* poll BUSY bit becoming cleared */ + timeout = 0x400; + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + for (i = 0; i < OCOTP_WORD_COUNT; i++) + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + + i * 0x10); + + /* close banks for power saving */ + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + once = 1; + + mutex_unlock(&ocotp_mutex); + + return ocotp_words; + +error_unlock: + mutex_unlock(&ocotp_mutex); + pr_err("%s: timeout in reading OCOTP\n", __func__); + return NULL; } enum mac_oui { @@ -454,32 +553,63 @@ static void __init mxs_machine_init(void) imx28_evk_post_init(); } -static const char *imx23_dt_compat[] __initdata = { - "fsl,imx23", - NULL, -}; +#define MX23_CLKCTRL_RESET_OFFSET 0x120 +#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 +#define MXS_CLKCTRL_RESET_CHIP (1 << 1) + +/* + * Reset the system. It is called by machine_restart(). + */ +static void mxs_restart(char mode, const char *cmd) +{ + struct device_node *np; + void __iomem *reset_addr; + + np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl"); + reset_addr = of_iomap(np, 0); + if (!reset_addr) + goto soft; + + if (of_device_is_compatible(np, "fsl,imx23-clkctrl")) + reset_addr += MX23_CLKCTRL_RESET_OFFSET; + else + reset_addr += MX28_CLKCTRL_RESET_OFFSET; -static const char *imx28_dt_compat[] __initdata = { + /* reset the chip */ + __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr); + + pr_err("Failed to assert the chip reset\n"); + + /* Delay to allow the serial port to show the message */ + mdelay(50); + +soft: + /* We'll take a jump through zero as a poor second */ + soft_restart(0); +} + +static void __init mxs_timer_init(void) +{ + if (of_machine_is_compatible("fsl,imx23")) + mx23_clocks_init(); + else + mx28_clocks_init(); + clocksource_of_init(); +} + +static const char *mxs_dt_compat[] __initdata = { "fsl,imx28", + "fsl,imx23", NULL, }; -DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)") - .map_io = mx23_map_io, - .init_irq = icoll_init_irq, - .handle_irq = icoll_handle_irq, - .init_time = imx23_timer_init, - .init_machine = mxs_machine_init, - .dt_compat = imx23_dt_compat, - .restart = mxs_restart, -MACHINE_END - -DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)") - .map_io = mx28_map_io, - .init_irq = icoll_init_irq, +DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = irqchip_init, .handle_irq = icoll_handle_irq, - .init_time = imx28_timer_init, + .init_time = mxs_timer_init, .init_machine = mxs_machine_init, - .dt_compat = imx28_dt_compat, + .init_late = mxs_pm_init, + .dt_compat = mxs_dt_compat, .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c deleted file mode 100644 index e63b7d87acbd..000000000000 --- a/arch/arm/mach-mxs/mm.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * - * Create static mapping between physical to virtual memory. - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/mach/map.h> - -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/common.h> - -/* - * Define the MX23 memory map. - */ -static struct map_desc mx23_io_desc[] __initdata = { - mxs_map_entry(MX23, OCRAM, MT_DEVICE), - mxs_map_entry(MX23, IO, MT_DEVICE), -}; - -/* - * Define the MX28 memory map. - */ -static struct map_desc mx28_io_desc[] __initdata = { - mxs_map_entry(MX28, OCRAM, MT_DEVICE), - mxs_map_entry(MX28, IO, MT_DEVICE), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx23_map_io(void) -{ - iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc)); -} - -void __init mx28_map_io(void) -{ - iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc)); -} diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c deleted file mode 100644 index 1dff46703753..000000000000 --- a/arch/arm/mach-mxs/ocotp.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/mutex.h> - -#include <asm/processor.h> /* for cpu_relax() */ - -#include <mach/mxs.h> -#include <mach/common.h> - -#define OCOTP_WORD_OFFSET 0x20 -#define OCOTP_WORD_COUNT 0x20 - -#define BM_OCOTP_CTRL_BUSY (1 << 8) -#define BM_OCOTP_CTRL_ERROR (1 << 9) -#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) - -static DEFINE_MUTEX(ocotp_mutex); -static u32 ocotp_words[OCOTP_WORD_COUNT]; - -const u32 *mxs_get_ocotp(void) -{ - void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); - int timeout = 0x400; - size_t i; - static int once = 0; - - if (once) - return ocotp_words; - - mutex_lock(&ocotp_mutex); - - /* - * clk_enable(hbus_clk) for ocotp can be skipped - * as it must be on when system is running. - */ - - /* try to clear ERROR bit */ - __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); - - /* check both BUSY and ERROR cleared */ - while ((__raw_readl(ocotp_base) & - (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - /* open OCOTP banks for read */ - __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - /* approximately wait 32 hclk cycles */ - udelay(1); - - /* poll BUSY bit becoming cleared */ - timeout = 0x400; - while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - for (i = 0; i < OCOTP_WORD_COUNT; i++) - ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + - i * 0x10); - - /* close banks for power saving */ - __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - once = 1; - - mutex_unlock(&ocotp_mutex); - - return ocotp_words; - -error_unlock: - mutex_unlock(&ocotp_mutex); - pr_err("%s: timeout in reading OCOTP\n", __func__); - return NULL; -} diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c index a9b4bbcdafb4..b2494d2db2c4 100644 --- a/arch/arm/mach-mxs/pm.c +++ b/arch/arm/mach-mxs/pm.c @@ -34,9 +34,7 @@ static struct platform_suspend_ops mxs_suspend_ops = { .valid = suspend_valid_only_mem, }; -static int __init mxs_pm_init(void) +void __init mxs_pm_init(void) { suspend_set_ops(&mxs_suspend_ops); - return 0; } -device_initcall(mxs_pm_init); diff --git a/arch/arm/mach-h720x/include/mach/timex.h b/arch/arm/mach-mxs/pm.h index 3f2f447ff36b..f57e7cdece2e 100644 --- a/arch/arm/mach-h720x/include/mach/timex.h +++ b/arch/arm/mach-mxs/pm.h @@ -1,15 +1,14 @@ /* - * arch/arm/mach-h720x/include/mach/timex.h - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. + * Copyright (C) 2013 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_TIMEX -#define __ASM_ARCH_TIMEX +#ifndef __ARCH_MXS_PM_H +#define __ARCH_MXS_PM_H -#define CLOCK_TICK_RATE 3686400 +void mxs_pm_init(void); #endif diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c deleted file mode 100644 index 30042e23bfa7..000000000000 --- a/arch/arm/mach-mxs/system.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/proc-fns.h> -#include <asm/system_misc.h> - -#include <mach/mxs.h> -#include <mach/common.h> - -#define MX23_CLKCTRL_RESET_OFFSET 0x120 -#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 -#define MXS_CLKCTRL_RESET_CHIP (1 << 1) - -#define MXS_MODULE_CLKGATE (1 << 30) -#define MXS_MODULE_SFTRST (1 << 31) - -static void __iomem *mxs_clkctrl_reset_addr; - -/* - * Reset the system. It is called by machine_restart(). - */ -void mxs_restart(char mode, const char *cmd) -{ - /* reset the chip */ - __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr); - - pr_err("Failed to assert the chip reset\n"); - - /* Delay to allow the serial port to show the message */ - mdelay(50); - - /* We'll take a jump through zero as a poor second */ - soft_restart(0); -} - -static int __init mxs_arch_reset_init(void) -{ - struct clk *clk; - - mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) + - (cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET : - MX28_CLKCTRL_RESET_OFFSET); - - clk = clk_get_sys("rtc", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - return 0; -} -core_initcall(mxs_arch_reset_init); - -/* - * Clear the bit and poll it cleared. This is usually called with - * a reset address and mask being either SFTRST(bit 31) or CLKGATE - * (bit 30). - */ -static int clear_poll_bit(void __iomem *addr, u32 mask) -{ - int timeout = 0x400; - - /* clear the bit */ - __mxs_clrl(mask, addr); - - /* - * SFTRST needs 3 GPMI clocks to settle, the reference manual - * recommends to wait 1us. - */ - udelay(1); - - /* poll the bit becoming clear */ - while ((__raw_readl(addr) & mask) && --timeout) - /* nothing */; - - return !timeout; -} - -int mxs_reset_block(void __iomem *reset_addr) -{ - int ret; - int timeout = 0x400; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear CLKGATE */ - __mxs_clrl(MXS_MODULE_CLKGATE, reset_addr); - - /* set SFTRST to reset the block */ - __mxs_setl(MXS_MODULE_SFTRST, reset_addr); - udelay(1); - - /* poll CLKGATE becoming set */ - while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout) - /* nothing */; - if (unlikely(!timeout)) - goto error; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear and poll CLKGATE */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE); - if (unlikely(ret)) - goto error; - - return 0; - -error: - pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); - return -ETIMEDOUT; -} -EXPORT_SYMBOL(mxs_reset_block); diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c deleted file mode 100644 index 421020498a1b..000000000000 --- a/arch/arm/mach-mxs/timer.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (C) 2000-2001 Deep Blue Solutions - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/of.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> -#include <asm/sched_clock.h> -#include <mach/mxs.h> -#include <mach/common.h> - -/* - * There are 2 versions of the timrot on Freescale MXS-based SoCs. - * The v1 on MX23 only gets 16 bits counter, while v2 on MX28 - * extends the counter to 32 bits. - * - * The implementation uses two timers, one for clock_event and - * another for clocksource. MX28 uses timrot 0 and 1, while MX23 - * uses 0 and 2. - */ - -#define MX23_TIMROT_VERSION_OFFSET 0x0a0 -#define MX28_TIMROT_VERSION_OFFSET 0x120 -#define BP_TIMROT_MAJOR_VERSION 24 -#define BV_TIMROT_VERSION_1 0x01 -#define BV_TIMROT_VERSION_2 0x02 -#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1) - -/* - * There are 4 registers for each timrotv2 instance, and 2 registers - * for each timrotv1. So address step 0x40 in macros below strides - * one instance of timrotv2 while two instances of timrotv1. - * - * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1 - * on MX28 while timrot2 on MX23. - */ -/* common between v1 and v2 */ -#define HW_TIMROT_ROTCTRL 0x00 -#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40) -/* v1 only */ -#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40) -/* v2 only */ -#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40) -#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40) - -#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6) -#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7) -#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) -#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) -#define BP_TIMROT_TIMCTRLn_SELECT 0 -#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 -#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb -#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf - -static struct clock_event_device mxs_clockevent_device; -static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED; - -static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR); -static u32 timrot_major_version; - -static inline void timrot_irq_disable(void) -{ - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); -} - -static inline void timrot_irq_enable(void) -{ - __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); -} - -static void timrot_irq_acknowledge(void) -{ - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); -} - -static cycle_t timrotv1_get_cycles(struct clocksource *cs) -{ - return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)) - & 0xffff0000) >> 16); -} - -static int timrotv1_set_next_event(unsigned long evt, - struct clock_event_device *dev) -{ - /* timrot decrements the count */ - __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0)); - - return 0; -} - -static int timrotv2_set_next_event(unsigned long evt, - struct clock_event_device *dev) -{ - /* timrot decrements the count */ - __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0)); - - return 0; -} - -static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - timrot_irq_acknowledge(); - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction mxs_timer_irq = { - .name = "MXS Timer Tick", - .dev_id = &mxs_clockevent_device, - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = mxs_timer_interrupt, -}; - -#ifdef DEBUG -static const char *clock_event_mode_label[] const = { - [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", - [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", - [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" -}; -#endif /* DEBUG */ - -static void mxs_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - /* Disable interrupt in timer module */ - timrot_irq_disable(); - - if (mode != mxs_clockevent_mode) { - /* Set event time into the furthest future */ - if (timrot_is_v1()) - __raw_writel(0xffff, - mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); - else - __raw_writel(0xffffffff, - mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); - - /* Clear pending interrupt */ - timrot_irq_acknowledge(); - } - -#ifdef DEBUG - pr_info("%s: changing mode from %s to %s\n", __func__, - clock_event_mode_label[mxs_clockevent_mode], - clock_event_mode_label[mode]); -#endif /* DEBUG */ - - /* Remember timer mode */ - mxs_clockevent_mode = mode; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - pr_err("%s: Periodic mode is not implemented\n", __func__); - break; - case CLOCK_EVT_MODE_ONESHOT: - timrot_irq_enable(); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appear */ - break; - } -} - -static struct clock_event_device mxs_clockevent_device = { - .name = "mxs_timrot", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_mode = mxs_set_mode, - .set_next_event = timrotv2_set_next_event, - .rating = 200, -}; - -static int __init mxs_clockevent_init(struct clk *timer_clk) -{ - if (timrot_is_v1()) - mxs_clockevent_device.set_next_event = timrotv1_set_next_event; - mxs_clockevent_device.cpumask = cpumask_of(0); - clockevents_config_and_register(&mxs_clockevent_device, - clk_get_rate(timer_clk), - timrot_is_v1() ? 0xf : 0x2, - timrot_is_v1() ? 0xfffe : 0xfffffffe); - - return 0; -} - -static struct clocksource clocksource_mxs = { - .name = "mxs_timer", - .rating = 200, - .read = timrotv1_get_cycles, - .mask = CLOCKSOURCE_MASK(16), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static u32 notrace mxs_read_sched_clock_v2(void) -{ - return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); -} - -static int __init mxs_clocksource_init(struct clk *timer_clk) -{ - unsigned int c = clk_get_rate(timer_clk); - - if (timrot_is_v1()) - clocksource_register_hz(&clocksource_mxs, c); - else { - clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), - "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); - setup_sched_clock(mxs_read_sched_clock_v2, 32, c); - } - - return 0; -} - -void __init mxs_timer_init(void) -{ - struct device_node *np; - struct clk *timer_clk; - int irq; - - np = of_find_compatible_node(NULL, NULL, "fsl,timrot"); - if (!np) { - pr_err("%s: failed find timrot node\n", __func__); - return; - } - - timer_clk = clk_get_sys("timrot", NULL); - if (IS_ERR(timer_clk)) { - pr_err("%s: failed to get clk\n", __func__); - return; - } - - clk_prepare_enable(timer_clk); - - /* - * Initialize timers to a known state - */ - mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); - - /* get timrot version */ - timrot_major_version = __raw_readl(mxs_timrot_base + - (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET : - MX28_TIMROT_VERSION_OFFSET)); - timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; - - /* one for clock_event */ - __raw_writel((timrot_is_v1() ? - BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : - BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | - BM_TIMROT_TIMCTRLn_UPDATE | - BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); - - /* another for clocksource */ - __raw_writel((timrot_is_v1() ? - BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : - BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | - BM_TIMROT_TIMCTRLn_RELOAD, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); - - /* set clocksource timer fixed count to the maximum */ - if (timrot_is_v1()) - __raw_writel(0xffff, - mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); - else - __raw_writel(0xffffffff, - mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); - - /* init and register the timer to the framework */ - mxs_clocksource_init(timer_clk); - mxs_clockevent_init(timer_clk); - - /* Make irqs happen */ - irq = irq_of_parse_and_map(np, 0); - setup_irq(irq, &mxs_timer_irq); -} diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 82226a5d60ef..9b9d105f194c 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -1,5 +1,24 @@ -if ARCH_NOMADIK +config ARCH_NOMADIK + bool "ST-Ericsson Nomadik" + depends on ARCH_MULTI_V5 + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_VIC + select CLKSRC_NOMADIK_MTU + select CLKSRC_NOMADIK_MTU_SCHED_CLOCK + select COMMON_CLK + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL + select PINCTRL_NOMADIK + select PINCTRL_STN8815 + select SPARSE_IRQ + select USE_OF + help + Support for the Nomadik platform by ST-Ericsson +if ARCH_NOMADIK menu "Nomadik boards" config MACH_NOMADIK_8815NHK @@ -9,8 +28,8 @@ config MACH_NOMADIK_8815NHK select I2C_ALGOBIT endmenu +endif config NOMADIK_8815 + depends on ARCH_NOMADIK bool - -endif diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot deleted file mode 100644 index ff0a4b5b0a82..000000000000 --- a/arch/arm/mach-nomadik/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 21c1aa512640..59f6ff5c9bae 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -38,7 +38,6 @@ #include <linux/gpio.h> #include <linux/amba/mmci.h> -#include <mach/irqs.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h deleted file mode 100644 index 90ac965a92fe..000000000000 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * mach-nomadik/include/mach/irqs.h - * - * Copyright (C) ST Microelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */ - -/* - * Interrupt numbers generic for all Nomadik Chip cuts - */ -#define IRQ_WATCHDOG (IRQ_VIC_START+0) -#define IRQ_SOFTINT (IRQ_VIC_START+1) -#define IRQ_CRYPTO (IRQ_VIC_START+2) -#define IRQ_OWM (IRQ_VIC_START+3) -#define IRQ_MTU0 (IRQ_VIC_START+4) -#define IRQ_MTU1 (IRQ_VIC_START+5) -#define IRQ_GPIO0 (IRQ_VIC_START+6) -#define IRQ_GPIO1 (IRQ_VIC_START+7) -#define IRQ_GPIO2 (IRQ_VIC_START+8) -#define IRQ_GPIO3 (IRQ_VIC_START+9) -#define IRQ_RTC_RTT (IRQ_VIC_START+10) -#define IRQ_SSP (IRQ_VIC_START+11) -#define IRQ_UART0 (IRQ_VIC_START+12) -#define IRQ_DMA1 (IRQ_VIC_START+13) -#define IRQ_CLCD_MDIF (IRQ_VIC_START+14) -#define IRQ_DMA0 (IRQ_VIC_START+15) -#define IRQ_PWRFAIL (IRQ_VIC_START+16) -#define IRQ_UART1 (IRQ_VIC_START+17) -#define IRQ_FIRDA (IRQ_VIC_START+18) -#define IRQ_MSP0 (IRQ_VIC_START+19) -#define IRQ_I2C0 (IRQ_VIC_START+20) -#define IRQ_I2C1 (IRQ_VIC_START+21) -#define IRQ_SDMMC (IRQ_VIC_START+22) -#define IRQ_USBOTG (IRQ_VIC_START+23) -#define IRQ_SVA_IT0 (IRQ_VIC_START+24) -#define IRQ_SVA_IT1 (IRQ_VIC_START+25) -#define IRQ_SAA_IT0 (IRQ_VIC_START+26) -#define IRQ_SAA_IT1 (IRQ_VIC_START+27) -#define IRQ_UART2 (IRQ_VIC_START+28) -#define IRQ_MSP2 (IRQ_VIC_START+29) -#define IRQ_L2CC (IRQ_VIC_START+30) -#define IRQ_HPI (IRQ_VIC_START+31) -#define IRQ_SKE (IRQ_VIC_START+32) -#define IRQ_KP (IRQ_VIC_START+33) -#define IRQ_MEMST (IRQ_VIC_START+34) -#define IRQ_SGA_IT (IRQ_VIC_START+35) -#define IRQ_USBM (IRQ_VIC_START+36) -#define IRQ_MSP1 (IRQ_VIC_START+37) - -#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64) - -/* After chip-specific IRQ numbers we have the GPIO ones */ -#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */ -#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET) -#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET) -#define NOMADIK_NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) - -/* Following two are used by entry_macro.S, to access our dual-vic */ -#define VIC_REG_IRQSR0 0 -#define VIC_REG_IRQSR1 0x20 - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h deleted file mode 100644 index 318b8896ce96..000000000000 --- a/arch/arm/mach-nomadik/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 2400000 - -#endif diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h deleted file mode 100644 index 106fccca2021..000000000000 --- a/arch/arm/mach-nomadik/include/mach/uncompress.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2008 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <asm/setup.h> -#include <asm/io.h> - -/* we need the constants in amba/serial.h, but it refers to amba_device */ -struct amba_device; -#include <linux/amba/serial.h> - -#define NOMADIK_UART_DR (void __iomem *)0x101FB000 -#define NOMADIK_UART_LCRH (void __iomem *)0x101FB02c -#define NOMADIK_UART_CR (void __iomem *)0x101FB030 -#define NOMADIK_UART_FR (void __iomem *)0x101FB018 - -static void putc(const char c) -{ - /* Do nothing if the UART is not enabled. */ - if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN)) - return; - - if (c == '\n') - putc('\r'); - - while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF) - barrier(); - writeb(c, NOMADIK_UART_DR); -} - -static void flush(void) -{ - if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN)) - return; - while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY) - barrier(); -} - -static inline void arch_decomp_setup(void) -{ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index cb7c6ae2e3fc..6c4f766365a2 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -543,15 +543,6 @@ static struct clk usb_dc_ck = { /* Direct from ULPD, no parent */ .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = USB_REQ_EN_SHIFT, -}; - -static struct clk usb_dc_ck7xx = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, }; @@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX), CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), CLK(NULL, "mclk", &mclk_16xx, CK_16XX), CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h index da6345dab03f..d05909c96715 100644 --- a/arch/arm/mach-omap1/dma.h +++ b/arch/arm/mach-omap1/dma.h @@ -21,21 +21,10 @@ /* DMA channels for omap1 */ #define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 #define OMAP_DMA_MCBSP1_TX 8 #define OMAP_DMA_MCBSP1_RX 9 #define OMAP_DMA_MCBSP3_TX 10 #define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 #define OMAP_DMA_MCBSP2_TX 16 #define OMAP_DMA_MCBSP2_RX 17 #define OMAP_DMA_UART3_TX 18 @@ -43,41 +32,11 @@ #define OMAP_DMA_CAMERA_IF_RX 20 #define OMAP_DMA_MMC_TX 21 #define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 #define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 #define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 /* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 #define OMAP_DMA_MMC2_TX 54 #define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 #endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 7a7690ab6cb8..dd712f109738 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -37,12 +37,14 @@ #include <linux/suspend.h> #include <linux/sched.h> -#include <linux/proc_fs.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/sysfs.h> #include <linux/module.h> #include <linux/io.h> #include <linux/atomic.h> +#include <linux/cpu.h> #include <asm/fncpy.h> #include <asm/system_misc.h> @@ -422,23 +424,12 @@ void omap1_pm_suspend(void) omap_rev()); } -#if defined(DEBUG) && defined(CONFIG_PROC_FS) -static int g_read_completed; - +#ifdef CONFIG_DEBUG_FS /* * Read system PM registers for debugging */ -static int omap_pm_read_proc( - char *page_buffer, - char **my_first_byte, - off_t virtual_start, - int length, - int *eof, - void *data) +static int omap_pm_debug_show(struct seq_file *m, void *v) { - int my_buffer_offset = 0; - char * const my_base = page_buffer; - ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); @@ -479,10 +470,7 @@ static int omap_pm_read_proc( MPUI1610_SAVE(EMIFS_CONFIG); } - if (virtual_start == 0) { - g_read_completed = 0; - - my_buffer_offset += sprintf(my_base + my_buffer_offset, + seq_printf(m, "ARM_CKCTL_REG: 0x%-8x \n" "ARM_IDLECT1_REG: 0x%-8x \n" "ARM_IDLECT2_REG: 0x%-8x \n" @@ -512,8 +500,8 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap7xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, + if (cpu_is_omap7xx()) { + seq_printf(m, "MPUI7XX_CTRL_REG 0x%-8x \n" "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" @@ -526,8 +514,8 @@ static int omap_pm_read_proc( MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), MPUI7XX_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap15xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, + } else if (cpu_is_omap15xx()) { + seq_printf(m, "MPUI1510_CTRL_REG 0x%-8x \n" "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n" @@ -540,8 +528,8 @@ static int omap_pm_read_proc( MPUI1510_SHOW(MPUI_DSP_API_CONFIG), MPUI1510_SHOW(EMIFF_SDRAM_CONFIG), MPUI1510_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap16xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, + } else if (cpu_is_omap16xx()) { + seq_printf(m, "MPUI1610_CTRL_REG 0x%-8x \n" "MPUI1610_DSP_STATUS_REG: 0x%-8x \n" "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n" @@ -554,28 +542,37 @@ static int omap_pm_read_proc( MPUI1610_SHOW(MPUI_DSP_API_CONFIG), MPUI1610_SHOW(EMIFF_SDRAM_CONFIG), MPUI1610_SHOW(EMIFS_CONFIG)); - } - - g_read_completed++; - } else if (g_read_completed >= 1) { - *eof = 1; - return 0; } - g_read_completed++; - *my_first_byte = page_buffer; - return my_buffer_offset; + return 0; } -static void omap_pm_init_proc(void) +static int omap_pm_debug_open(struct inode *inode, struct file *file) { - /* XXX Appears to leak memory */ - create_proc_read_entry("driver/omap_pm", - S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, NULL); + return single_open(file, omap_pm_debug_show, + &inode->i_private); } -#endif /* DEBUG && CONFIG_PROC_FS */ +static const struct file_operations omap_pm_debug_fops = { + .open = omap_pm_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static void omap_pm_init_debugfs(void) +{ + struct dentry *d; + + d = debugfs_create_dir("pm_debug", NULL); + if (!d) + return; + + (void) debugfs_create_file("omap_pm", S_IWUSR | S_IRUGO, + d, NULL, &omap_pm_debug_fops); +} + +#endif /* CONFIG_DEBUG_FS */ /* * omap_pm_prepare - Do preliminary suspend work. @@ -584,8 +581,7 @@ static void omap_pm_init_proc(void) static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - disable_hlt(); - + cpu_idle_poll_ctrl(true); return 0; } @@ -621,7 +617,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - enable_hlt(); + cpu_idle_poll_ctrl(false); } @@ -701,8 +697,8 @@ static int __init omap_pm_init(void) suspend_set_ops(&omap_pm_ops); -#if defined(DEBUG) && defined(CONFIG_PROC_FS) - omap_pm_init_proc(); +#ifdef CONFIG_DEBUG_FS + omap_pm_init_debugfs(); #endif #ifdef CONFIG_OMAP_32K_TIMER diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b9c0ed3f648c..857b1f097fd8 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -15,6 +15,7 @@ config ARCH_OMAP2PLUS select OMAP_DM_TIMER select PINCTRL select PROC_DEVICETREE if PROC_FS + select SOC_BUS select SPARSE_IRQ select USE_OF help @@ -55,6 +56,7 @@ config SOC_HAS_REALTIME_COUNTER config ARCH_OMAP2 bool "TI OMAP2" depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V6 default y select CPU_V6 select MULTI_IRQ_HANDLER @@ -64,6 +66,7 @@ config ARCH_OMAP2 config ARCH_OMAP3 bool "TI OMAP3" depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V7 default y select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM @@ -80,6 +83,7 @@ config ARCH_OMAP4 bool "TI OMAP4" default y depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V7 select ARCH_HAS_OPP select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP select ARM_CPU_SUSPEND if PM @@ -87,6 +91,8 @@ config ARCH_OMAP4 select ARM_GIC select CACHE_L2X0 select CPU_V7 + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_SMP select LOCAL_TIMERS if SMP select OMAP_INTERCONNECT @@ -96,9 +102,12 @@ config ARCH_OMAP4 select PM_RUNTIME if CPU_IDLE select USB_ARCH_HAS_EHCI if USB_SUPPORT select COMMON_CLK + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 config SOC_OMAP5 bool "TI OMAP5" + depends on ARCH_MULTI_V7 select ARM_CPU_SUSPEND if PM select ARM_GIC select CPU_V7 @@ -135,6 +144,7 @@ config SOC_TI81XX config SOC_AM33XX bool "AM33XX support" + depends on ARCH_MULTI_V7 default y select ARM_CPU_SUSPEND if PM select CPU_V7 diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index cb0596b631cf..5b86423c89fa 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -38,7 +38,7 @@ #include "gpmc-smc91x.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "mux.h" #include "hsmmc.h" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 7eb9651dd0f7..a4d4664894e1 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -35,7 +35,7 @@ #include "common.h" #include <linux/omap-dma.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "gpmc.h" #include "gpmc-smc91x.h" diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 191f9762ba63..c29d2e743688 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -35,8 +35,7 @@ #include "common.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "am35xx-emac.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 7fda3f5f8a7f..e0ed8c07fc54 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -41,8 +41,7 @@ #include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include "common.h" diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 42fbf1ef12a9..e44b804f75ae 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -43,8 +43,7 @@ #include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/input/matrix_keypad.h> diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 5b4ec51c385f..69c0acf5aa63 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -34,7 +34,7 @@ #include <asm/mach/map.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "common.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 95ccec0eeab9..b54562d1235e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -31,7 +31,7 @@ #include <asm/mach/arch.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/mtd-onenand-omap2.h> #include "common.h" diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index b12fe966a7b9..8a8e505a0e90 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -41,7 +41,7 @@ #include "gpmc-smsc911x.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "board-flash.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6955a428f534..6de78605c0af 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -44,7 +44,7 @@ #include <asm/mach/flash.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 2de92facc8a3..4f1bbc3cc29b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -51,7 +51,7 @@ #include "common.h" #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "soc.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index bf0956489899..8afbba0923d6 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -44,8 +44,7 @@ #include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index ab79a4422bcc..f9101407cd56 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -47,8 +47,7 @@ #include <asm/mach/map.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "common.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c index 0f0a97c1fcc0..3662f4d4c8ea 100644 --- a/arch/arm/mach-omap2/cclock2420_data.c +++ b/arch/arm/mach-omap2/cclock2420_data.c @@ -1739,153 +1739,153 @@ DEFINE_STRUCT_CLK(wdt4_ick, aes_ick_parent_names, aes_ick_ops); static struct omap_clk omap2420_clks[] = { /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_242X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_242X), - CLK(NULL, "osc_ck", &osc_ck, CK_242X), - CLK(NULL, "sys_ck", &sys_ck, CK_242X), - CLK(NULL, "alt_ck", &alt_ck, CK_242X), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X), + CLK(NULL, "func_32k_ck", &func_32k_ck), + CLK(NULL, "secure_32k_ck", &secure_32k_ck), + CLK(NULL, "osc_ck", &osc_ck), + CLK(NULL, "sys_ck", &sys_ck), + CLK(NULL, "alt_ck", &alt_ck), + CLK(NULL, "mcbsp_clks", &mcbsp_clks), /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_242X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_242X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_242X), + CLK(NULL, "dpll_ck", &dpll_ck), + CLK(NULL, "apll96_ck", &apll96_ck), + CLK(NULL, "apll54_ck", &apll54_ck), /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X), - CLK(NULL, "core_ck", &core_ck, CK_242X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_242X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_242X), - CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), - CLK(NULL, "emul_ck", &emul_ck, CK_242X), + CLK(NULL, "func_54m_ck", &func_54m_ck), + CLK(NULL, "core_ck", &core_ck), + CLK(NULL, "func_96m_ck", &func_96m_ck), + CLK(NULL, "func_48m_ck", &func_48m_ck), + CLK(NULL, "func_12m_ck", &func_12m_ck), + CLK(NULL, "sys_clkout_src", &sys_clkout_src), + CLK(NULL, "sys_clkout", &sys_clkout), + CLK(NULL, "sys_clkout2_src", &sys_clkout2_src), + CLK(NULL, "sys_clkout2", &sys_clkout2), + CLK(NULL, "emul_ck", &emul_ck), /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_242X), + CLK(NULL, "mpu_ck", &mpu_ck), /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_242X), - CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), - CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), - CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), + CLK(NULL, "dsp_fck", &dsp_fck), + CLK(NULL, "dsp_ick", &dsp_ick), + CLK(NULL, "iva1_ifck", &iva1_ifck), + CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck), /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_242X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_242X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_242X), + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck), + CLK(NULL, "gfx_ick", &gfx_ick), /* DSS domain clocks */ - CLK("omapdss_dss", "ick", &dss_ick, CK_242X), - CLK(NULL, "dss_ick", &dss_ick, CK_242X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_242X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_242X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_242X), + CLK("omapdss_dss", "ick", &dss_ick), + CLK(NULL, "dss_ick", &dss_ick), + CLK(NULL, "dss1_fck", &dss1_fck), + CLK(NULL, "dss2_fck", &dss2_fck), + CLK(NULL, "dss_54m_fck", &dss_54m_fck), /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_242X), + CLK(NULL, "core_l3_ck", &core_l3_ck), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck), + CLK(NULL, "usb_l4_ick", &usb_l4_ick), /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_242X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_242X), + CLK(NULL, "l4_ck", &l4_ck), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_242X), + CLK(NULL, "virt_prcm_set", &virt_prcm_set), /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_242X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_242X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_242X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_242X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_242X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_242X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_242X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_242X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_242X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_242X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_242X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_242X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_242X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_242X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_242X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_242X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_242X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_242X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_242X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_242X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_242X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_242X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_242X), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_242X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X), - CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_242X), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_242X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X), - CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_242X), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_242X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X), - CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_242X), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_242X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_242X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_242X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_242X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_242X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_242X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_242X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_242X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_242X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X), - CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_242X), - CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_242X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X), - CLK("omap24xxcam", "fck", &cam_fck, CK_242X), - CLK(NULL, "cam_fck", &cam_fck, CK_242X), - CLK("omap24xxcam", "ick", &cam_ick, CK_242X), - CLK(NULL, "cam_ick", &cam_ick, CK_242X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_242X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_242X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_242X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_242X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_242X), - CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), - CLK(NULL, "mmc_ick", &mmc_ick, CK_242X), - CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), - CLK(NULL, "mmc_fck", &mmc_fck, CK_242X), - CLK(NULL, "fac_ick", &fac_ick, CK_242X), - CLK(NULL, "fac_fck", &fac_fck, CK_242X), - CLK(NULL, "eac_ick", &eac_ick, CK_242X), - CLK(NULL, "eac_fck", &eac_fck, CK_242X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X), - CLK(NULL, "hdq_ick", &hdq_ick, CK_242X), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_242X), - CLK(NULL, "hdq_fck", &hdq_fck, CK_242X), - CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X), - CLK(NULL, "i2c1_ick", &i2c1_ick, CK_242X), - CLK(NULL, "i2c1_fck", &i2c1_fck, CK_242X), - CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X), - CLK(NULL, "i2c2_ick", &i2c2_ick, CK_242X), - CLK(NULL, "i2c2_fck", &i2c2_fck, CK_242X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_242X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_242X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_242X), - CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), - CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), - CLK(NULL, "des_ick", &des_ick, CK_242X), - CLK("omap-sham", "ick", &sha_ick, CK_242X), - CLK(NULL, "sha_ick", &sha_ick, CK_242X), - CLK("omap_rng", "ick", &rng_ick, CK_242X), - CLK(NULL, "rng_ick", &rng_ick, CK_242X), - CLK("omap-aes", "ick", &aes_ick, CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_242X), - CLK(NULL, "pka_ick", &pka_ick, CK_242X), - CLK(NULL, "usb_fck", &usb_fck, CK_242X), - CLK("musb-hdrc", "fck", &osc_ck, CK_242X), - CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_242X), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_242X), - CLK(NULL, "timer_ext_ck", &alt_ck, CK_242X), - CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_242X), + CLK(NULL, "gpt1_ick", &gpt1_ick), + CLK(NULL, "gpt1_fck", &gpt1_fck), + CLK(NULL, "gpt2_ick", &gpt2_ick), + CLK(NULL, "gpt2_fck", &gpt2_fck), + CLK(NULL, "gpt3_ick", &gpt3_ick), + CLK(NULL, "gpt3_fck", &gpt3_fck), + CLK(NULL, "gpt4_ick", &gpt4_ick), + CLK(NULL, "gpt4_fck", &gpt4_fck), + CLK(NULL, "gpt5_ick", &gpt5_ick), + CLK(NULL, "gpt5_fck", &gpt5_fck), + CLK(NULL, "gpt6_ick", &gpt6_ick), + CLK(NULL, "gpt6_fck", &gpt6_fck), + CLK(NULL, "gpt7_ick", &gpt7_ick), + CLK(NULL, "gpt7_fck", &gpt7_fck), + CLK(NULL, "gpt8_ick", &gpt8_ick), + CLK(NULL, "gpt8_fck", &gpt8_fck), + CLK(NULL, "gpt9_ick", &gpt9_ick), + CLK(NULL, "gpt9_fck", &gpt9_fck), + CLK(NULL, "gpt10_ick", &gpt10_ick), + CLK(NULL, "gpt10_fck", &gpt10_fck), + CLK(NULL, "gpt11_ick", &gpt11_ick), + CLK(NULL, "gpt11_fck", &gpt11_fck), + CLK(NULL, "gpt12_ick", &gpt12_ick), + CLK(NULL, "gpt12_fck", &gpt12_fck), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick), + CLK(NULL, "mcspi1_ick", &mcspi1_ick), + CLK(NULL, "mcspi1_fck", &mcspi1_fck), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick), + CLK(NULL, "mcspi2_ick", &mcspi2_ick), + CLK(NULL, "mcspi2_fck", &mcspi2_fck), + CLK(NULL, "uart1_ick", &uart1_ick), + CLK(NULL, "uart1_fck", &uart1_fck), + CLK(NULL, "uart2_ick", &uart2_ick), + CLK(NULL, "uart2_fck", &uart2_fck), + CLK(NULL, "uart3_ick", &uart3_ick), + CLK(NULL, "uart3_fck", &uart3_fck), + CLK(NULL, "gpios_ick", &gpios_ick), + CLK(NULL, "gpios_fck", &gpios_fck), + CLK("omap_wdt", "ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck), + CLK(NULL, "sync_32k_ick", &sync_32k_ick), + CLK(NULL, "wdt1_ick", &wdt1_ick), + CLK(NULL, "omapctrl_ick", &omapctrl_ick), + CLK("omap24xxcam", "fck", &cam_fck), + CLK(NULL, "cam_fck", &cam_fck), + CLK("omap24xxcam", "ick", &cam_ick), + CLK(NULL, "cam_ick", &cam_ick), + CLK(NULL, "mailboxes_ick", &mailboxes_ick), + CLK(NULL, "wdt4_ick", &wdt4_ick), + CLK(NULL, "wdt4_fck", &wdt4_fck), + CLK(NULL, "wdt3_ick", &wdt3_ick), + CLK(NULL, "wdt3_fck", &wdt3_fck), + CLK(NULL, "mspro_ick", &mspro_ick), + CLK(NULL, "mspro_fck", &mspro_fck), + CLK("mmci-omap.0", "ick", &mmc_ick), + CLK(NULL, "mmc_ick", &mmc_ick), + CLK("mmci-omap.0", "fck", &mmc_fck), + CLK(NULL, "mmc_fck", &mmc_fck), + CLK(NULL, "fac_ick", &fac_ick), + CLK(NULL, "fac_fck", &fac_fck), + CLK(NULL, "eac_ick", &eac_ick), + CLK(NULL, "eac_fck", &eac_fck), + CLK("omap_hdq.0", "ick", &hdq_ick), + CLK(NULL, "hdq_ick", &hdq_ick), + CLK("omap_hdq.0", "fck", &hdq_fck), + CLK(NULL, "hdq_fck", &hdq_fck), + CLK("omap_i2c.1", "ick", &i2c1_ick), + CLK(NULL, "i2c1_ick", &i2c1_ick), + CLK(NULL, "i2c1_fck", &i2c1_fck), + CLK("omap_i2c.2", "ick", &i2c2_ick), + CLK(NULL, "i2c2_ick", &i2c2_ick), + CLK(NULL, "i2c2_fck", &i2c2_fck), + CLK(NULL, "gpmc_fck", &gpmc_fck), + CLK(NULL, "sdma_fck", &sdma_fck), + CLK(NULL, "sdma_ick", &sdma_ick), + CLK(NULL, "sdrc_ick", &sdrc_ick), + CLK(NULL, "vlynq_ick", &vlynq_ick), + CLK(NULL, "vlynq_fck", &vlynq_fck), + CLK(NULL, "des_ick", &des_ick), + CLK("omap-sham", "ick", &sha_ick), + CLK(NULL, "sha_ick", &sha_ick), + CLK("omap_rng", "ick", &rng_ick), + CLK(NULL, "rng_ick", &rng_ick), + CLK("omap-aes", "ick", &aes_ick), + CLK(NULL, "aes_ick", &aes_ick), + CLK(NULL, "pka_ick", &pka_ick), + CLK(NULL, "usb_fck", &usb_fck), + CLK("musb-hdrc", "fck", &osc_ck), + CLK(NULL, "timer_32k_ck", &func_32k_ck), + CLK(NULL, "timer_sys_ck", &sys_ck), + CLK(NULL, "timer_ext_ck", &alt_ck), + CLK(NULL, "cpufreq_ck", &virt_prcm_set), }; @@ -1904,8 +1904,6 @@ static const char *enable_init_clks[] = { int __init omap2420_clk_init(void) { - struct omap_clk *c; - prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_242X; rate_table = omap2420_rate_table; @@ -1914,12 +1912,7 @@ int __init omap2420_clk_init(void) omap2xxx_clkt_vps_check_bootloader_rates(); - for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks); - c++) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } + omap_clocks_register(omap2420_clks, ARRAY_SIZE(omap2420_clks)); omap2xxx_clkt_vps_late_init(); diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c index aed8f74ca076..5e4b037bb24c 100644 --- a/arch/arm/mach-omap2/cclock2430_data.c +++ b/arch/arm/mach-omap2/cclock2430_data.c @@ -1840,168 +1840,170 @@ DEFINE_STRUCT_CLK(wdt4_ick, aes_ick_parent_names, aes_ick_ops); static struct omap_clk omap2430_clks[] = { /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X), - CLK(NULL, "osc_ck", &osc_ck, CK_243X), - CLK("twl", "fck", &osc_ck, CK_243X), - CLK(NULL, "sys_ck", &sys_ck, CK_243X), - CLK(NULL, "alt_ck", &alt_ck, CK_243X), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X), + CLK(NULL, "func_32k_ck", &func_32k_ck), + CLK(NULL, "secure_32k_ck", &secure_32k_ck), + CLK(NULL, "osc_ck", &osc_ck), + CLK("twl", "fck", &osc_ck), + CLK(NULL, "sys_ck", &sys_ck), + CLK(NULL, "alt_ck", &alt_ck), + CLK(NULL, "mcbsp_clks", &mcbsp_clks), /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_243X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_243X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_243X), + CLK(NULL, "dpll_ck", &dpll_ck), + CLK(NULL, "apll96_ck", &apll96_ck), + CLK(NULL, "apll54_ck", &apll54_ck), /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X), - CLK(NULL, "core_ck", &core_ck, CK_243X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_243X), - CLK(NULL, "emul_ck", &emul_ck, CK_243X), + CLK(NULL, "func_54m_ck", &func_54m_ck), + CLK(NULL, "core_ck", &core_ck), + CLK(NULL, "func_96m_ck", &func_96m_ck), + CLK(NULL, "func_48m_ck", &func_48m_ck), + CLK(NULL, "func_12m_ck", &func_12m_ck), + CLK(NULL, "sys_clkout_src", &sys_clkout_src), + CLK(NULL, "sys_clkout", &sys_clkout), + CLK(NULL, "emul_ck", &emul_ck), /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_243X), + CLK(NULL, "mpu_ck", &mpu_ck), /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_243X), - CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), + CLK(NULL, "dsp_fck", &dsp_fck), + CLK(NULL, "iva2_1_ick", &iva2_1_ick), /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_243X), + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck), + CLK(NULL, "gfx_ick", &gfx_ick), /* Modem domain clocks */ - CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), - CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + CLK(NULL, "mdm_ick", &mdm_ick), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck), /* DSS domain clocks */ - CLK("omapdss_dss", "ick", &dss_ick, CK_243X), - CLK(NULL, "dss_ick", &dss_ick, CK_243X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_243X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_243X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X), + CLK("omapdss_dss", "ick", &dss_ick), + CLK(NULL, "dss_ick", &dss_ick), + CLK(NULL, "dss1_fck", &dss1_fck), + CLK(NULL, "dss2_fck", &dss2_fck), + CLK(NULL, "dss_54m_fck", &dss_54m_fck), /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X), + CLK(NULL, "core_l3_ck", &core_l3_ck), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck), + CLK(NULL, "usb_l4_ick", &usb_l4_ick), /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_243X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X), + CLK(NULL, "l4_ck", &l4_ck), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X), + CLK(NULL, "virt_prcm_set", &virt_prcm_set), /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_243X), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_243X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X), - CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_243X), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_243X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), - CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_243X), - CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_243X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), - CLK(NULL, "mcbsp4_ick", &mcbsp4_ick, CK_243X), - CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_243X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), - CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_243X), - CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_243X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X), - CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_243X), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_243X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X), - CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_243X), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_243X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), - CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_243X), - CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_243X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_243X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_243X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_243X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_243X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_243X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_243X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_243X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_243X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X), - CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_243X), - CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X), - CLK(NULL, "icr_ick", &icr_ick, CK_243X), - CLK("omap24xxcam", "fck", &cam_fck, CK_243X), - CLK(NULL, "cam_fck", &cam_fck, CK_243X), - CLK("omap24xxcam", "ick", &cam_ick, CK_243X), - CLK(NULL, "cam_ick", &cam_ick, CK_243X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_243X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_243X), - CLK(NULL, "fac_ick", &fac_ick, CK_243X), - CLK(NULL, "fac_fck", &fac_fck, CK_243X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X), - CLK(NULL, "hdq_ick", &hdq_ick, CK_243X), - CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X), - CLK(NULL, "hdq_fck", &hdq_fck, CK_243X), - CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X), - CLK(NULL, "i2c1_ick", &i2c1_ick, CK_243X), - CLK(NULL, "i2chs1_fck", &i2chs1_fck, CK_243X), - CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X), - CLK(NULL, "i2c2_ick", &i2c2_ick, CK_243X), - CLK(NULL, "i2chs2_fck", &i2chs2_fck, CK_243X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_243X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_243X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), - CLK(NULL, "des_ick", &des_ick, CK_243X), - CLK("omap-sham", "ick", &sha_ick, CK_243X), - CLK("omap_rng", "ick", &rng_ick, CK_243X), - CLK(NULL, "rng_ick", &rng_ick, CK_243X), - CLK("omap-aes", "ick", &aes_ick, CK_243X), - CLK(NULL, "pka_ick", &pka_ick, CK_243X), - CLK(NULL, "usb_fck", &usb_fck, CK_243X), - CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X), - CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), - CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X), - CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_243X), - CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_243X), - CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X), - CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_243X), - CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_243X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), - CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), - CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), - CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), - CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck, CK_243X), - CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), - CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck, CK_243X), - CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), - CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), - CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_243X), + CLK(NULL, "gpt1_ick", &gpt1_ick), + CLK(NULL, "gpt1_fck", &gpt1_fck), + CLK(NULL, "gpt2_ick", &gpt2_ick), + CLK(NULL, "gpt2_fck", &gpt2_fck), + CLK(NULL, "gpt3_ick", &gpt3_ick), + CLK(NULL, "gpt3_fck", &gpt3_fck), + CLK(NULL, "gpt4_ick", &gpt4_ick), + CLK(NULL, "gpt4_fck", &gpt4_fck), + CLK(NULL, "gpt5_ick", &gpt5_ick), + CLK(NULL, "gpt5_fck", &gpt5_fck), + CLK(NULL, "gpt6_ick", &gpt6_ick), + CLK(NULL, "gpt6_fck", &gpt6_fck), + CLK(NULL, "gpt7_ick", &gpt7_ick), + CLK(NULL, "gpt7_fck", &gpt7_fck), + CLK(NULL, "gpt8_ick", &gpt8_ick), + CLK(NULL, "gpt8_fck", &gpt8_fck), + CLK(NULL, "gpt9_ick", &gpt9_ick), + CLK(NULL, "gpt9_fck", &gpt9_fck), + CLK(NULL, "gpt10_ick", &gpt10_ick), + CLK(NULL, "gpt10_fck", &gpt10_fck), + CLK(NULL, "gpt11_ick", &gpt11_ick), + CLK(NULL, "gpt11_fck", &gpt11_fck), + CLK(NULL, "gpt12_ick", &gpt12_ick), + CLK(NULL, "gpt12_fck", &gpt12_fck), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick), + CLK(NULL, "mcbsp3_ick", &mcbsp3_ick), + CLK(NULL, "mcbsp3_fck", &mcbsp3_fck), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick), + CLK(NULL, "mcbsp4_ick", &mcbsp4_ick), + CLK(NULL, "mcbsp4_fck", &mcbsp4_fck), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick), + CLK(NULL, "mcbsp5_ick", &mcbsp5_ick), + CLK(NULL, "mcbsp5_fck", &mcbsp5_fck), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick), + CLK(NULL, "mcspi1_ick", &mcspi1_ick), + CLK(NULL, "mcspi1_fck", &mcspi1_fck), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick), + CLK(NULL, "mcspi2_ick", &mcspi2_ick), + CLK(NULL, "mcspi2_fck", &mcspi2_fck), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick), + CLK(NULL, "mcspi3_ick", &mcspi3_ick), + CLK(NULL, "mcspi3_fck", &mcspi3_fck), + CLK(NULL, "uart1_ick", &uart1_ick), + CLK(NULL, "uart1_fck", &uart1_fck), + CLK(NULL, "uart2_ick", &uart2_ick), + CLK(NULL, "uart2_fck", &uart2_fck), + CLK(NULL, "uart3_ick", &uart3_ick), + CLK(NULL, "uart3_fck", &uart3_fck), + CLK(NULL, "gpios_ick", &gpios_ick), + CLK(NULL, "gpios_fck", &gpios_fck), + CLK("omap_wdt", "ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck), + CLK(NULL, "sync_32k_ick", &sync_32k_ick), + CLK(NULL, "wdt1_ick", &wdt1_ick), + CLK(NULL, "omapctrl_ick", &omapctrl_ick), + CLK(NULL, "icr_ick", &icr_ick), + CLK("omap24xxcam", "fck", &cam_fck), + CLK(NULL, "cam_fck", &cam_fck), + CLK("omap24xxcam", "ick", &cam_ick), + CLK(NULL, "cam_ick", &cam_ick), + CLK(NULL, "mailboxes_ick", &mailboxes_ick), + CLK(NULL, "wdt4_ick", &wdt4_ick), + CLK(NULL, "wdt4_fck", &wdt4_fck), + CLK(NULL, "mspro_ick", &mspro_ick), + CLK(NULL, "mspro_fck", &mspro_fck), + CLK(NULL, "fac_ick", &fac_ick), + CLK(NULL, "fac_fck", &fac_fck), + CLK("omap_hdq.0", "ick", &hdq_ick), + CLK(NULL, "hdq_ick", &hdq_ick), + CLK("omap_hdq.1", "fck", &hdq_fck), + CLK(NULL, "hdq_fck", &hdq_fck), + CLK("omap_i2c.1", "ick", &i2c1_ick), + CLK(NULL, "i2c1_ick", &i2c1_ick), + CLK(NULL, "i2chs1_fck", &i2chs1_fck), + CLK("omap_i2c.2", "ick", &i2c2_ick), + CLK(NULL, "i2c2_ick", &i2c2_ick), + CLK(NULL, "i2chs2_fck", &i2chs2_fck), + CLK(NULL, "gpmc_fck", &gpmc_fck), + CLK(NULL, "sdma_fck", &sdma_fck), + CLK(NULL, "sdma_ick", &sdma_ick), + CLK(NULL, "sdrc_ick", &sdrc_ick), + CLK(NULL, "des_ick", &des_ick), + CLK("omap-sham", "ick", &sha_ick), + CLK(NULL, "sha_ick", &sha_ick), + CLK("omap_rng", "ick", &rng_ick), + CLK(NULL, "rng_ick", &rng_ick), + CLK("omap-aes", "ick", &aes_ick), + CLK(NULL, "aes_ick", &aes_ick), + CLK(NULL, "pka_ick", &pka_ick), + CLK(NULL, "usb_fck", &usb_fck), + CLK("musb-omap2430", "ick", &usbhs_ick), + CLK(NULL, "usbhs_ick", &usbhs_ick), + CLK("omap_hsmmc.0", "ick", &mmchs1_ick), + CLK(NULL, "mmchs1_ick", &mmchs1_ick), + CLK(NULL, "mmchs1_fck", &mmchs1_fck), + CLK("omap_hsmmc.1", "ick", &mmchs2_ick), + CLK(NULL, "mmchs2_ick", &mmchs2_ick), + CLK(NULL, "mmchs2_fck", &mmchs2_fck), + CLK(NULL, "gpio5_ick", &gpio5_ick), + CLK(NULL, "gpio5_fck", &gpio5_fck), + CLK(NULL, "mdm_intc_ick", &mdm_intc_ick), + CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck), + CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck), + CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck), + CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck), + CLK(NULL, "timer_32k_ck", &func_32k_ck), + CLK(NULL, "timer_sys_ck", &sys_ck), + CLK(NULL, "timer_ext_ck", &alt_ck), + CLK(NULL, "cpufreq_ck", &virt_prcm_set), }; static const char *enable_init_clks[] = { @@ -2019,8 +2021,6 @@ static const char *enable_init_clks[] = { int __init omap2430_clk_init(void) { - struct omap_clk *c; - prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_243X; rate_table = omap2430_rate_table; @@ -2029,12 +2029,7 @@ int __init omap2430_clk_init(void) omap2xxx_clkt_vps_check_bootloader_rates(); - for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks); - c++) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } + omap_clocks_register(omap2430_clks, ARRAY_SIZE(omap2430_clks)); omap2xxx_clkt_vps_late_init(); diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 7f091c85384e..6ebc7803bc3e 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -413,6 +413,14 @@ static struct clk smartreflex1_fck; DEFINE_STRUCT_CLK_HW_OMAP(smartreflex1_fck, NULL); DEFINE_STRUCT_CLK(smartreflex1_fck, dpll_core_ck_parents, clk_ops_null); +static struct clk sha0_fck; +DEFINE_STRUCT_CLK_HW_OMAP(sha0_fck, NULL); +DEFINE_STRUCT_CLK(sha0_fck, dpll_core_ck_parents, clk_ops_null); + +static struct clk aes0_fck; +DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL); +DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null); + /* * Modules clock nodes * @@ -838,80 +846,82 @@ DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops); * clkdev */ static struct omap_clk am33xx_clks[] = { - CLK(NULL, "clk_32768_ck", &clk_32768_ck, CK_AM33XX), - CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck, CK_AM33XX), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_AM33XX), - CLK(NULL, "virt_24000000_ck", &virt_24000000_ck, CK_AM33XX), - CLK(NULL, "virt_25000000_ck", &virt_25000000_ck, CK_AM33XX), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_AM33XX), - CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_AM33XX), - CLK(NULL, "tclkin_ck", &tclkin_ck, CK_AM33XX), - CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_AM33XX), - CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_AM33XX), - CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_AM33XX), - CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX), - CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX), - CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX), - CLK("cpu0", NULL, &dpll_mpu_ck, CK_AM33XX), - CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX), - CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck, CK_AM33XX), - CLK(NULL, "dpll_disp_ck", &dpll_disp_ck, CK_AM33XX), - CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_AM33XX), - CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck, CK_AM33XX), - CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck, CK_AM33XX), - CLK(NULL, "adc_tsc_fck", &adc_tsc_fck, CK_AM33XX), - CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX), - CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck, CK_AM33XX), - CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX), - CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX), - CLK("481cc000.d_can", NULL, &dcan0_fck, CK_AM33XX), - CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX), - CLK("481d0000.d_can", NULL, &dcan1_fck, CK_AM33XX), - CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX), - CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX), - CLK(NULL, "mcasp0_fck", &mcasp0_fck, CK_AM33XX), - CLK(NULL, "mcasp1_fck", &mcasp1_fck, CK_AM33XX), - CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), - CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), - CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), - CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX), - CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX), - CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX), - CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX), - CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX), - CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX), - CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX), - CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), - CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), - CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), - CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk, CK_AM33XX), - CLK(NULL, "l3_gclk", &l3_gclk, CK_AM33XX), - CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck, CK_AM33XX), - CLK(NULL, "l4hs_gclk", &l4hs_gclk, CK_AM33XX), - CLK(NULL, "l3s_gclk", &l3s_gclk, CK_AM33XX), - CLK(NULL, "l4fw_gclk", &l4fw_gclk, CK_AM33XX), - CLK(NULL, "l4ls_gclk", &l4ls_gclk, CK_AM33XX), - CLK(NULL, "clk_24mhz", &clk_24mhz, CK_AM33XX), - CLK(NULL, "sysclk_div_ck", &sysclk_div_ck, CK_AM33XX), - CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk, CK_AM33XX), - CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk, CK_AM33XX), - CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, CK_AM33XX), - CLK(NULL, "gpio0_dbclk", &gpio0_dbclk, CK_AM33XX), - CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_AM33XX), - CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_AM33XX), - CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_AM33XX), - CLK(NULL, "lcd_gclk", &lcd_gclk, CK_AM33XX), - CLK(NULL, "mmc_clk", &mmc_clk, CK_AM33XX), - CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck, CK_AM33XX), - CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), - CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), - CLK(NULL, "clkout2_div_ck", &clkout2_div_ck, CK_AM33XX), - CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX), - CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX), + CLK(NULL, "clk_32768_ck", &clk_32768_ck), + CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), + CLK(NULL, "virt_24000000_ck", &virt_24000000_ck), + CLK(NULL, "virt_25000000_ck", &virt_25000000_ck), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck), + CLK(NULL, "tclkin_ck", &tclkin_ck), + CLK(NULL, "dpll_core_ck", &dpll_core_ck), + CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck), + CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck), + CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck), + CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck), + CLK("cpu0", NULL, &dpll_mpu_ck), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck), + CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck), + CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck), + CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck), + CLK(NULL, "dpll_disp_ck", &dpll_disp_ck), + CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck), + CLK(NULL, "dpll_per_ck", &dpll_per_ck), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck), + CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck), + CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck), + CLK(NULL, "adc_tsc_fck", &adc_tsc_fck), + CLK(NULL, "cefuse_fck", &cefuse_fck), + CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck), + CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick), + CLK(NULL, "dcan0_fck", &dcan0_fck), + CLK("481cc000.d_can", NULL, &dcan0_fck), + CLK(NULL, "dcan1_fck", &dcan1_fck), + CLK("481d0000.d_can", NULL, &dcan1_fck), + CLK(NULL, "debugss_ick", &debugss_ick), + CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk), + CLK(NULL, "mcasp0_fck", &mcasp0_fck), + CLK(NULL, "mcasp1_fck", &mcasp1_fck), + CLK(NULL, "mmu_fck", &mmu_fck), + CLK(NULL, "smartreflex0_fck", &smartreflex0_fck), + CLK(NULL, "smartreflex1_fck", &smartreflex1_fck), + CLK(NULL, "sha0_fck", &sha0_fck), + CLK(NULL, "aes0_fck", &aes0_fck), + CLK(NULL, "timer1_fck", &timer1_fck), + CLK(NULL, "timer2_fck", &timer2_fck), + CLK(NULL, "timer3_fck", &timer3_fck), + CLK(NULL, "timer4_fck", &timer4_fck), + CLK(NULL, "timer5_fck", &timer5_fck), + CLK(NULL, "timer6_fck", &timer6_fck), + CLK(NULL, "timer7_fck", &timer7_fck), + CLK(NULL, "usbotg_fck", &usbotg_fck), + CLK(NULL, "ieee5000_fck", &ieee5000_fck), + CLK(NULL, "wdt1_fck", &wdt1_fck), + CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk), + CLK(NULL, "l3_gclk", &l3_gclk), + CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck), + CLK(NULL, "l4hs_gclk", &l4hs_gclk), + CLK(NULL, "l3s_gclk", &l3s_gclk), + CLK(NULL, "l4fw_gclk", &l4fw_gclk), + CLK(NULL, "l4ls_gclk", &l4ls_gclk), + CLK(NULL, "clk_24mhz", &clk_24mhz), + CLK(NULL, "sysclk_div_ck", &sysclk_div_ck), + CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk), + CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk), + CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck), + CLK(NULL, "gpio0_dbclk", &gpio0_dbclk), + CLK(NULL, "gpio1_dbclk", &gpio1_dbclk), + CLK(NULL, "gpio2_dbclk", &gpio2_dbclk), + CLK(NULL, "gpio3_dbclk", &gpio3_dbclk), + CLK(NULL, "lcd_gclk", &lcd_gclk), + CLK(NULL, "mmc_clk", &mmc_clk), + CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck), + CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck), + CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck), + CLK(NULL, "clkout2_div_ck", &clkout2_div_ck), + CLK(NULL, "timer_32k_ck", &clkdiv32k_ick), + CLK(NULL, "timer_sys_ck", &sys_clkin_ck), }; @@ -926,21 +936,10 @@ static const char *enable_init_clks[] = { int __init am33xx_clk_init(void) { - struct omap_clk *c; - u32 cpu_clkflg; - - if (soc_is_am33xx()) { + if (soc_is_am33xx()) cpu_mask = RATE_IN_AM33XX; - cpu_clkflg = CK_AM33XX; - } - - for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) { - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } - } + + omap_clocks_register(am33xx_clks, ARRAY_SIZE(am33xx_clks)); omap2_clk_disable_autoidle_all(); diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 4579c3c5338f..45cd26430d1f 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -3219,289 +3219,327 @@ static struct clk_hw_omap wdt3_ick_hw = { DEFINE_STRUCT_CLK(wdt3_ick, gpio2_ick_parent_names, aes2_ick_ops); /* - * clkdev + * clocks specific to omap3430es1 + */ +static struct omap_clk omap3430es1_clks[] = { + CLK(NULL, "gfx_l3_ck", &gfx_l3_ck), + CLK(NULL, "gfx_l3_fck", &gfx_l3_fck), + CLK(NULL, "gfx_l3_ick", &gfx_l3_ick), + CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck), + CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck), + CLK(NULL, "d2d_26m_fck", &d2d_26m_fck), + CLK(NULL, "fshostusb_fck", &fshostusb_fck), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1), + CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1), + CLK(NULL, "fac_ick", &fac_ick), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1), + CLK(NULL, "usb_l4_ick", &usb_l4_ick), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1), + CLK("omapdss_dss", "ick", &dss_ick_3430es1), + CLK(NULL, "dss_ick", &dss_ick_3430es1), +}; + +/* + * clocks specific to am35xx + */ +static struct omap_clk am35xx_clks[] = { + CLK(NULL, "ipss_ick", &ipss_ick), + CLK(NULL, "rmii_ck", &rmii_ck), + CLK(NULL, "pclk_ck", &pclk_ck), + CLK(NULL, "emac_ick", &emac_ick), + CLK(NULL, "emac_fck", &emac_fck), + CLK("davinci_emac.0", NULL, &emac_ick), + CLK("davinci_mdio.0", NULL, &emac_fck), + CLK("vpfe-capture", "master", &vpfe_ick), + CLK("vpfe-capture", "slave", &vpfe_fck), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx), + CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx), + CLK(NULL, "hecc_ck", &hecc_ck), + CLK(NULL, "uart4_ick", &uart4_ick_am35xx), + CLK(NULL, "uart4_fck", &uart4_fck_am35xx), +}; + +/* + * clocks specific to omap36xx + */ +static struct omap_clk omap36xx_clks[] = { + CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck), + CLK(NULL, "uart4_fck", &uart4_fck), +}; + +/* + * clocks common to omap36xx omap34xx + */ +static struct omap_clk omap34xx_omap36xx_clks[] = { + CLK(NULL, "aes1_ick", &aes1_ick), + CLK("omap_rng", "ick", &rng_ick), + CLK(NULL, "sha11_ick", &sha11_ick), + CLK(NULL, "des1_ick", &des1_ick), + CLK(NULL, "cam_mclk", &cam_mclk), + CLK(NULL, "cam_ick", &cam_ick), + CLK(NULL, "csi2_96m_fck", &csi2_96m_fck), + CLK(NULL, "security_l3_ick", &security_l3_ick), + CLK(NULL, "pka_ick", &pka_ick), + CLK(NULL, "icr_ick", &icr_ick), + CLK("omap-aes", "ick", &aes2_ick), + CLK("omap-sham", "ick", &sha12_ick), + CLK(NULL, "des2_ick", &des2_ick), + CLK(NULL, "mspro_ick", &mspro_ick), + CLK(NULL, "mailboxes_ick", &mailboxes_ick), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), + CLK(NULL, "sr1_fck", &sr1_fck), + CLK(NULL, "sr2_fck", &sr2_fck), + CLK(NULL, "sr_l4_ick", &sr_l4_ick), + CLK(NULL, "security_l4_ick2", &security_l4_ick2), + CLK(NULL, "wkup_l4_ick", &wkup_l4_ick), + CLK(NULL, "dpll2_fck", &dpll2_fck), + CLK(NULL, "iva2_ck", &iva2_ck), + CLK(NULL, "modem_fck", &modem_fck), + CLK(NULL, "sad2d_ick", &sad2d_ick), + CLK(NULL, "mad2d_ick", &mad2d_ick), + CLK(NULL, "mspro_fck", &mspro_fck), + CLK(NULL, "dpll2_ck", &dpll2_ck), + CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck), +}; + +/* + * clocks common to omap36xx and omap3430es2plus + */ +static struct omap_clk omap36xx_omap3430es2plus_clks[] = { + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2), + CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2), + CLK(NULL, "usim_fck", &usim_fck), + CLK(NULL, "usim_ick", &usim_ick), +}; + +/* + * clocks common to am35xx omap36xx and omap3430es2plus + */ +static struct omap_clk omap36xx_am35xx_omap3430es2plus_clks[] = { + CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck), + CLK(NULL, "dpll5_ck", &dpll5_ck), + CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck), + CLK(NULL, "sgx_fck", &sgx_fck), + CLK(NULL, "sgx_ick", &sgx_ick), + CLK(NULL, "cpefuse_fck", &cpefuse_fck), + CLK(NULL, "ts_fck", &ts_fck), + CLK(NULL, "usbtll_fck", &usbtll_fck), + CLK("usbhs_omap", "usbtll_fck", &usbtll_fck), + CLK("usbhs_tll", "usbtll_fck", &usbtll_fck), + CLK(NULL, "usbtll_ick", &usbtll_ick), + CLK("usbhs_omap", "usbtll_ick", &usbtll_ick), + CLK("usbhs_tll", "usbtll_ick", &usbtll_ick), + CLK("omap_hsmmc.2", "ick", &mmchs3_ick), + CLK(NULL, "mmchs3_ick", &mmchs3_ick), + CLK(NULL, "mmchs3_fck", &mmchs3_fck), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2), + CLK("omapdss_dss", "ick", &dss_ick_3430es2), + CLK(NULL, "dss_ick", &dss_ick_3430es2), + CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck), + CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck), + CLK(NULL, "usbhost_ick", &usbhost_ick), + CLK("usbhs_omap", "usbhost_ick", &usbhost_ick), +}; + +/* + * common clocks */ static struct omap_clk omap3xxx_clks[] = { - CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX), - CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX), - CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX), - CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX), - CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_3XXX), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX), - CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX), - CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX), - CLK("twl", "fck", &osc_sys_ck, CK_3XXX), - CLK(NULL, "sys_ck", &sys_ck, CK_3XXX), - CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX), - CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX), - CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX), - CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_3XXX), - CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_3XXX), - CLK(NULL, "dpll2_ck", &dpll2_ck, CK_34XX | CK_36XX), - CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_34XX | CK_36XX), - CLK(NULL, "dpll3_ck", &dpll3_ck, CK_3XXX), - CLK(NULL, "core_ck", &core_ck, CK_3XXX), - CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_3XXX), - CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_3XXX), - CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX), - CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_3XXX), - CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX), - CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX), - CLK(NULL, "dpll4_ck", &dpll4_ck, CK_3XXX), - CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_3XXX), - CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX), - CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX), - CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_3XXX), - CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_3XXX), - CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_3XXX), - CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_3XXX), - CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_3XXX), - CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_3XXX), - CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_3XXX), - CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_3XXX), - CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_3XXX), - CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_3XXX), - CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX), - CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX), - CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_3XXX), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_3XXX), - CLK(NULL, "corex2_fck", &corex2_fck, CK_3XXX), - CLK(NULL, "dpll1_fck", &dpll1_fck, CK_3XXX), - CLK(NULL, "mpu_ck", &mpu_ck, CK_3XXX), - CLK(NULL, "arm_fck", &arm_fck, CK_3XXX), - CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX), - CLK(NULL, "dpll2_fck", &dpll2_fck, CK_34XX | CK_36XX), - CLK(NULL, "iva2_ck", &iva2_ck, CK_34XX | CK_36XX), - CLK(NULL, "l3_ick", &l3_ick, CK_3XXX), - CLK(NULL, "l4_ick", &l4_ick, CK_3XXX), - CLK(NULL, "rm_ick", &rm_ick, CK_3XXX), - CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), - CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), - CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), - CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), - CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), - CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), - CLK(NULL, "modem_fck", &modem_fck, CK_34XX | CK_36XX), - CLK(NULL, "sad2d_ick", &sad2d_ick, CK_34XX | CK_36XX), - CLK(NULL, "mad2d_ick", &mad2d_ick, CK_34XX | CK_36XX), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_3XXX), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_3XXX), - CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_tll", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), - CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX), - CLK(NULL, "mspro_fck", &mspro_fck, CK_34XX | CK_36XX), - CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_3XXX), - CLK(NULL, "i2c3_fck", &i2c3_fck, CK_3XXX), - CLK(NULL, "i2c2_fck", &i2c2_fck, CK_3XXX), - CLK(NULL, "i2c1_fck", &i2c1_fck, CK_3XXX), - CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_3XXX), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_3XXX), - CLK(NULL, "core_48m_fck", &core_48m_fck, CK_3XXX), - CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_3XXX), - CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_3XXX), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_3XXX), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_3XXX), - CLK(NULL, "uart2_fck", &uart2_fck, CK_3XXX), - CLK(NULL, "uart1_fck", &uart1_fck, CK_3XXX), - CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), - CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX), - CLK(NULL, "hdq_fck", &hdq_fck, CK_3XXX), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX), - CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), - CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1, CK_3430ES1), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX), - CLK(NULL, "security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX), - CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX), - CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), - CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_tll", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "mmchs3_ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), - CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), - CLK("omap-sham", "ick", &sha12_ick, CK_34XX | CK_36XX), - CLK(NULL, "des2_ick", &des2_ick, CK_34XX | CK_36XX), - CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_3XXX), - CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX), - CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_3XXX), - CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_3XXX), - CLK(NULL, "mspro_ick", &mspro_ick, CK_34XX | CK_36XX), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_3XXX), - CLK(NULL, "hdq_ick", &hdq_ick, CK_3XXX), - CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_3XXX), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_3XXX), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_3XXX), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_3XXX), - CLK(NULL, "mcspi4_ick", &mcspi4_ick, CK_3XXX), - CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_3XXX), - CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_3XXX), - CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_3XXX), - CLK("omap_i2c.3", "ick", &i2c3_ick, CK_3XXX), - CLK("omap_i2c.2", "ick", &i2c2_ick, CK_3XXX), - CLK("omap_i2c.1", "ick", &i2c1_ick, CK_3XXX), - CLK(NULL, "i2c3_ick", &i2c3_ick, CK_3XXX), - CLK(NULL, "i2c2_ick", &i2c2_ick, CK_3XXX), - CLK(NULL, "i2c1_ick", &i2c1_ick, CK_3XXX), - CLK(NULL, "uart2_ick", &uart2_ick, CK_3XXX), - CLK(NULL, "uart1_ick", &uart1_ick, CK_3XXX), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_3XXX), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_3XXX), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_3XXX), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_3XXX), - CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_3XXX), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_3XXX), - CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_3XXX), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_34XX | CK_36XX), - CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), - CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_34XX | CK_36XX), - CLK(NULL, "aes1_ick", &aes1_ick, CK_34XX | CK_36XX), - CLK("omap_rng", "ick", &rng_ick, CK_34XX | CK_36XX), - CLK(NULL, "sha11_ick", &sha11_ick, CK_34XX | CK_36XX), - CLK(NULL, "des1_ick", &des1_ick, CK_34XX | CK_36XX), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_3XXX), - CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_3XXX), - CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_3XXX), - CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK(NULL, "dss_ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "dss_ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX), - CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), - CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), - CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "utmi_p1_gfclk", &dummy_ck, CK_3XXX), - CLK(NULL, "utmi_p2_gfclk", &dummy_ck, CK_3XXX), - CLK(NULL, "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), - CLK(NULL, "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), - CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), - CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX), - CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), - CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), - CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_3XXX), - CLK(NULL, "wdt2_fck", &wdt2_fck, CK_3XXX), - CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_34XX | CK_36XX), - CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2PLUS | CK_36XX), - CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX), - CLK(NULL, "wdt2_ick", &wdt2_ick, CK_3XXX), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_3XXX), - CLK(NULL, "gpio1_ick", &gpio1_ick, CK_3XXX), - CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX), - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX), - CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), - CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), - CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), - CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), - CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_AM35XX), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_3XXX), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_3XXX), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_3XXX), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_3XXX), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_3XXX), - CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_3XXX), - CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_3XXX), - CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_3XXX), - CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_3XXX), - CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_3XXX), - CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_3XXX), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_3XXX), - CLK(NULL, "per_l4_ick", &per_l4_ick, CK_3XXX), - CLK(NULL, "gpio6_ick", &gpio6_ick, CK_3XXX), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_3XXX), - CLK(NULL, "gpio4_ick", &gpio4_ick, CK_3XXX), - CLK(NULL, "gpio3_ick", &gpio3_ick, CK_3XXX), - CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX), - CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX), - CLK(NULL, "uart4_ick", &uart4_ick, CK_36XX), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_3XXX), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_3XXX), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_3XXX), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_3XXX), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_3XXX), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX), - CLK(NULL, "mcbsp4_ick", &mcbsp2_ick, CK_3XXX), - CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_3XXX), - CLK(NULL, "mcbsp2_ick", &mcbsp4_ick, CK_3XXX), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_3XXX), - CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_3XXX), - CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_3XXX), - CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX), - CLK(NULL, "emu_src_ck", &emu_src_ck, CK_3XXX), - CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX), - CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX), - CLK(NULL, "atclk_fck", &atclk_fck, CK_3XXX), - CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_3XXX), - CLK(NULL, "traceclk_fck", &traceclk_fck, CK_3XXX), - CLK(NULL, "sr1_fck", &sr1_fck, CK_34XX | CK_36XX), - CLK(NULL, "sr2_fck", &sr2_fck, CK_34XX | CK_36XX), - CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_34XX | CK_36XX), - CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_3XXX), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_3XXX), - CLK(NULL, "wdt1_fck", &wdt1_fck, CK_3XXX), - CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), - CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), - CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK(NULL, "emac_ick", &emac_ick, CK_AM35XX), - CLK(NULL, "emac_fck", &emac_fck, CK_AM35XX), - CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX), - CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), - CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), - CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX), - CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx, CK_AM35XX), - CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), - CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), - CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX), - CLK(NULL, "cpufreq_ck", &dpll1_ck, CK_3XXX), + CLK(NULL, "apb_pclk", &dummy_apb_pclk), + CLK(NULL, "omap_32k_fck", &omap_32k_fck), + CLK(NULL, "virt_12m_ck", &virt_12m_ck), + CLK(NULL, "virt_13m_ck", &virt_13m_ck), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), + CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck), + CLK(NULL, "osc_sys_ck", &osc_sys_ck), + CLK("twl", "fck", &osc_sys_ck), + CLK(NULL, "sys_ck", &sys_ck), + CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck), + CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck), + CLK(NULL, "sys_altclk", &sys_altclk), + CLK(NULL, "mcbsp_clks", &mcbsp_clks), + CLK(NULL, "sys_clkout1", &sys_clkout1), + CLK(NULL, "dpll1_ck", &dpll1_ck), + CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck), + CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck), + CLK(NULL, "dpll3_ck", &dpll3_ck), + CLK(NULL, "core_ck", &core_ck), + CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck), + CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck), + CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck), + CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck), + CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck), + CLK(NULL, "dpll4_ck", &dpll4_ck), + CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck), + CLK(NULL, "omap_96m_fck", &omap_96m_fck), + CLK(NULL, "cm_96m_fck", &cm_96m_fck), + CLK(NULL, "omap_54m_fck", &omap_54m_fck), + CLK(NULL, "omap_48m_fck", &omap_48m_fck), + CLK(NULL, "omap_12m_fck", &omap_12m_fck), + CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck), + CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck), + CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck), + CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck), + CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck), + CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck), + CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck), + CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck), + CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck), + CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck), + CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck), + CLK(NULL, "clkout2_src_ck", &clkout2_src_ck), + CLK(NULL, "sys_clkout2", &sys_clkout2), + CLK(NULL, "corex2_fck", &corex2_fck), + CLK(NULL, "dpll1_fck", &dpll1_fck), + CLK(NULL, "mpu_ck", &mpu_ck), + CLK(NULL, "arm_fck", &arm_fck), + CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck), + CLK(NULL, "l3_ick", &l3_ick), + CLK(NULL, "l4_ick", &l4_ick), + CLK(NULL, "rm_ick", &rm_ick), + CLK(NULL, "gpt10_fck", &gpt10_fck), + CLK(NULL, "gpt11_fck", &gpt11_fck), + CLK(NULL, "core_96m_fck", &core_96m_fck), + CLK(NULL, "mmchs2_fck", &mmchs2_fck), + CLK(NULL, "mmchs1_fck", &mmchs1_fck), + CLK(NULL, "i2c3_fck", &i2c3_fck), + CLK(NULL, "i2c2_fck", &i2c2_fck), + CLK(NULL, "i2c1_fck", &i2c1_fck), + CLK(NULL, "mcbsp5_fck", &mcbsp5_fck), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), + CLK(NULL, "core_48m_fck", &core_48m_fck), + CLK(NULL, "mcspi4_fck", &mcspi4_fck), + CLK(NULL, "mcspi3_fck", &mcspi3_fck), + CLK(NULL, "mcspi2_fck", &mcspi2_fck), + CLK(NULL, "mcspi1_fck", &mcspi1_fck), + CLK(NULL, "uart2_fck", &uart2_fck), + CLK(NULL, "uart1_fck", &uart1_fck), + CLK(NULL, "core_12m_fck", &core_12m_fck), + CLK("omap_hdq.0", "fck", &hdq_fck), + CLK(NULL, "hdq_fck", &hdq_fck), + CLK(NULL, "core_l3_ick", &core_l3_ick), + CLK(NULL, "sdrc_ick", &sdrc_ick), + CLK(NULL, "gpmc_fck", &gpmc_fck), + CLK(NULL, "core_l4_ick", &core_l4_ick), + CLK("omap_hsmmc.1", "ick", &mmchs2_ick), + CLK("omap_hsmmc.0", "ick", &mmchs1_ick), + CLK(NULL, "mmchs2_ick", &mmchs2_ick), + CLK(NULL, "mmchs1_ick", &mmchs1_ick), + CLK("omap_hdq.0", "ick", &hdq_ick), + CLK(NULL, "hdq_ick", &hdq_ick), + CLK("omap2_mcspi.4", "ick", &mcspi4_ick), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick), + CLK(NULL, "mcspi4_ick", &mcspi4_ick), + CLK(NULL, "mcspi3_ick", &mcspi3_ick), + CLK(NULL, "mcspi2_ick", &mcspi2_ick), + CLK(NULL, "mcspi1_ick", &mcspi1_ick), + CLK("omap_i2c.3", "ick", &i2c3_ick), + CLK("omap_i2c.2", "ick", &i2c2_ick), + CLK("omap_i2c.1", "ick", &i2c1_ick), + CLK(NULL, "i2c3_ick", &i2c3_ick), + CLK(NULL, "i2c2_ick", &i2c2_ick), + CLK(NULL, "i2c1_ick", &i2c1_ick), + CLK(NULL, "uart2_ick", &uart2_ick), + CLK(NULL, "uart1_ick", &uart1_ick), + CLK(NULL, "gpt11_ick", &gpt11_ick), + CLK(NULL, "gpt10_ick", &gpt10_ick), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), + CLK(NULL, "mcbsp5_ick", &mcbsp5_ick), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), + CLK(NULL, "omapctrl_ick", &omapctrl_ick), + CLK(NULL, "dss_tv_fck", &dss_tv_fck), + CLK(NULL, "dss_96m_fck", &dss_96m_fck), + CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck), + CLK(NULL, "utmi_p1_gfclk", &dummy_ck), + CLK(NULL, "utmi_p2_gfclk", &dummy_ck), + CLK(NULL, "xclk60mhsp1_ck", &dummy_ck), + CLK(NULL, "xclk60mhsp2_ck", &dummy_ck), + CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck), + CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck), + CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck), + CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck), + CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck), + CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck), + CLK(NULL, "init_60m_fclk", &dummy_ck), + CLK(NULL, "gpt1_fck", &gpt1_fck), + CLK(NULL, "aes2_ick", &aes2_ick), + CLK(NULL, "wkup_32k_fck", &wkup_32k_fck), + CLK(NULL, "gpio1_dbck", &gpio1_dbck), + CLK(NULL, "sha12_ick", &sha12_ick), + CLK(NULL, "wdt2_fck", &wdt2_fck), + CLK("omap_wdt", "ick", &wdt2_ick), + CLK(NULL, "wdt2_ick", &wdt2_ick), + CLK(NULL, "wdt1_ick", &wdt1_ick), + CLK(NULL, "gpio1_ick", &gpio1_ick), + CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick), + CLK(NULL, "gpt12_ick", &gpt12_ick), + CLK(NULL, "gpt1_ick", &gpt1_ick), + CLK(NULL, "per_96m_fck", &per_96m_fck), + CLK(NULL, "per_48m_fck", &per_48m_fck), + CLK(NULL, "uart3_fck", &uart3_fck), + CLK(NULL, "gpt2_fck", &gpt2_fck), + CLK(NULL, "gpt3_fck", &gpt3_fck), + CLK(NULL, "gpt4_fck", &gpt4_fck), + CLK(NULL, "gpt5_fck", &gpt5_fck), + CLK(NULL, "gpt6_fck", &gpt6_fck), + CLK(NULL, "gpt7_fck", &gpt7_fck), + CLK(NULL, "gpt8_fck", &gpt8_fck), + CLK(NULL, "gpt9_fck", &gpt9_fck), + CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck), + CLK(NULL, "gpio6_dbck", &gpio6_dbck), + CLK(NULL, "gpio5_dbck", &gpio5_dbck), + CLK(NULL, "gpio4_dbck", &gpio4_dbck), + CLK(NULL, "gpio3_dbck", &gpio3_dbck), + CLK(NULL, "gpio2_dbck", &gpio2_dbck), + CLK(NULL, "wdt3_fck", &wdt3_fck), + CLK(NULL, "per_l4_ick", &per_l4_ick), + CLK(NULL, "gpio6_ick", &gpio6_ick), + CLK(NULL, "gpio5_ick", &gpio5_ick), + CLK(NULL, "gpio4_ick", &gpio4_ick), + CLK(NULL, "gpio3_ick", &gpio3_ick), + CLK(NULL, "gpio2_ick", &gpio2_ick), + CLK(NULL, "wdt3_ick", &wdt3_ick), + CLK(NULL, "uart3_ick", &uart3_ick), + CLK(NULL, "uart4_ick", &uart4_ick), + CLK(NULL, "gpt9_ick", &gpt9_ick), + CLK(NULL, "gpt8_ick", &gpt8_ick), + CLK(NULL, "gpt7_ick", &gpt7_ick), + CLK(NULL, "gpt6_ick", &gpt6_ick), + CLK(NULL, "gpt5_ick", &gpt5_ick), + CLK(NULL, "gpt4_ick", &gpt4_ick), + CLK(NULL, "gpt3_ick", &gpt3_ick), + CLK(NULL, "gpt2_ick", &gpt2_ick), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick), + CLK(NULL, "mcbsp4_ick", &mcbsp2_ick), + CLK(NULL, "mcbsp3_ick", &mcbsp3_ick), + CLK(NULL, "mcbsp2_ick", &mcbsp4_ick), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), + CLK(NULL, "mcbsp3_fck", &mcbsp3_fck), + CLK(NULL, "mcbsp4_fck", &mcbsp4_fck), + CLK("etb", "emu_src_ck", &emu_src_ck), + CLK(NULL, "emu_src_ck", &emu_src_ck), + CLK(NULL, "pclk_fck", &pclk_fck), + CLK(NULL, "pclkx2_fck", &pclkx2_fck), + CLK(NULL, "atclk_fck", &atclk_fck), + CLK(NULL, "traceclk_src_fck", &traceclk_src_fck), + CLK(NULL, "traceclk_fck", &traceclk_fck), + CLK(NULL, "secure_32k_fck", &secure_32k_fck), + CLK(NULL, "gpt12_fck", &gpt12_fck), + CLK(NULL, "wdt1_fck", &wdt1_fck), + CLK(NULL, "timer_32k_ck", &omap_32k_fck), + CLK(NULL, "timer_sys_ck", &sys_ck), + CLK(NULL, "cpufreq_ck", &dpll1_ck), }; static const char *enable_init_clks[] = { @@ -3512,8 +3550,27 @@ static const char *enable_init_clks[] = { int __init omap3xxx_clk_init(void) { - struct omap_clk *c; - u32 cpu_clkflg = 0; + if (omap3_has_192mhz_clk()) + omap_96m_alwon_fck = omap_96m_alwon_fck_3630; + + if (cpu_is_omap3630()) { + dpll3_m3x2_ck = dpll3_m3x2_ck_3630; + dpll4_m2x2_ck = dpll4_m2x2_ck_3630; + dpll4_m3x2_ck = dpll4_m3x2_ck_3630; + dpll4_m4x2_ck = dpll4_m4x2_ck_3630; + dpll4_m5x2_ck = dpll4_m5x2_ck_3630; + dpll4_m6x2_ck = dpll4_m6x2_ck_3630; + } + + /* + * XXX This type of dynamic rewriting of the clock tree is + * deprecated and should be revised soon. + */ + if (cpu_is_omap3630()) + dpll4_dd = dpll4_dd_3630; + else + dpll4_dd = dpll4_dd_34xx; + /* * 3505 must be tested before 3517, since 3517 returns true @@ -3523,13 +3580,20 @@ int __init omap3xxx_clk_init(void) */ if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; - cpu_clkflg = CK_AM35XX; + omap_clocks_register(am35xx_clks, ARRAY_SIZE(am35xx_clks)); + omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); + omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); } else if (cpu_is_omap3630()) { cpu_mask = (RATE_IN_34XX | RATE_IN_36XX); - cpu_clkflg = CK_36XX; - } else if (cpu_is_ti816x()) { - cpu_mask = RATE_IN_TI816X; - cpu_clkflg = CK_TI816X; + omap_clocks_register(omap36xx_clks, ARRAY_SIZE(omap36xx_clks)); + omap_clocks_register(omap36xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_omap3430es2plus_clks)); + omap_clocks_register(omap34xx_omap36xx_clks, + ARRAY_SIZE(omap34xx_omap36xx_clks)); + omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); + omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); } else if (soc_is_am33xx()) { cpu_mask = RATE_IN_AM33XX; } else if (cpu_is_ti814x()) { @@ -3537,49 +3601,32 @@ int __init omap3xxx_clk_init(void) } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; - cpu_clkflg = CK_3430ES1; + omap_clocks_register(omap3430es1_clks, + ARRAY_SIZE(omap3430es1_clks)); + omap_clocks_register(omap34xx_omap36xx_clks, + ARRAY_SIZE(omap34xx_omap36xx_clks)); + omap_clocks_register(omap3xxx_clks, + ARRAY_SIZE(omap3xxx_clks)); } else { /* * Assume that anything that we haven't matched yet * has 3430ES2-type clocks. */ cpu_mask = RATE_IN_3430ES2PLUS; - cpu_clkflg = CK_3430ES2PLUS; + omap_clocks_register(omap34xx_omap36xx_clks, + ARRAY_SIZE(omap34xx_omap36xx_clks)); + omap_clocks_register(omap36xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_omap3430es2plus_clks)); + omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); + omap_clocks_register(omap3xxx_clks, + ARRAY_SIZE(omap3xxx_clks)); } } else { WARN(1, "clock: could not identify OMAP3 variant\n"); } - if (omap3_has_192mhz_clk()) - omap_96m_alwon_fck = omap_96m_alwon_fck_3630; - - if (cpu_is_omap3630()) { - dpll3_m3x2_ck = dpll3_m3x2_ck_3630; - dpll4_m2x2_ck = dpll4_m2x2_ck_3630; - dpll4_m3x2_ck = dpll4_m3x2_ck_3630; - dpll4_m4x2_ck = dpll4_m4x2_ck_3630; - dpll4_m5x2_ck = dpll4_m5x2_ck_3630; - dpll4_m6x2_ck = dpll4_m6x2_ck_3630; - } - - /* - * XXX This type of dynamic rewriting of the clock tree is - * deprecated and should be revised soon. - */ - if (cpu_is_omap3630()) - dpll4_dd = dpll4_dd_3630; - else - dpll4_dd = dpll4_dd_34xx; - - for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); - c++) - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } - - omap2_clk_disable_autoidle_all(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, ARRAY_SIZE(enable_init_clks)); diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 3d58f335f173..88e37a474334 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -52,6 +52,13 @@ */ #define OMAP4_DPLL_ABE_DEFFREQ 98304000 +/* + * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section + * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred + * locked frequency for the USB DPLL is 960MHz. + */ +#define OMAP4_DPLL_USB_DEFFREQ 960000000 + /* Root clocks */ DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); @@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel, OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK, hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops); +DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0, + OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL); + DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0, OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); @@ -1413,283 +1424,285 @@ DEFINE_CLK_MUX(auxclkreq5_ck, auxclkreq_ck_parents, NULL, 0x0, 0x0, NULL); /* - * clkdev + * clocks specific to omap4460 */ +static struct omap_clk omap446x_clks[] = { + CLK(NULL, "div_ts_ck", &div_ts_ck), + CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk), +}; + +/* + * clocks specific to omap4430 + */ +static struct omap_clk omap443x_clks[] = { + CLK(NULL, "bandgap_fclk", &bandgap_fclk), +}; +/* + * clocks common to omap44xx + */ static struct omap_clk omap44xx_clks[] = { - CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck, CK_443X), - CLK(NULL, "pad_clks_src_ck", &pad_clks_src_ck, CK_443X), - CLK(NULL, "pad_clks_ck", &pad_clks_ck, CK_443X), - CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck, CK_443X), - CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck, CK_443X), - CLK(NULL, "slimbus_src_clk", &slimbus_src_clk, CK_443X), - CLK(NULL, "slimbus_clk", &slimbus_clk, CK_443X), - CLK(NULL, "sys_32k_ck", &sys_32k_ck, CK_443X), - CLK(NULL, "virt_12000000_ck", &virt_12000000_ck, CK_443X), - CLK(NULL, "virt_13000000_ck", &virt_13000000_ck, CK_443X), - CLK(NULL, "virt_16800000_ck", &virt_16800000_ck, CK_443X), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_443X), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_443X), - CLK(NULL, "virt_27000000_ck", &virt_27000000_ck, CK_443X), - CLK(NULL, "virt_38400000_ck", &virt_38400000_ck, CK_443X), - CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_443X), - CLK(NULL, "tie_low_clock_ck", &tie_low_clock_ck, CK_443X), - CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck, CK_443X), - CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck, CK_443X), - CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck, CK_443X), - CLK(NULL, "xclk60motg_ck", &xclk60motg_ck, CK_443X), - CLK(NULL, "abe_dpll_bypass_clk_mux_ck", &abe_dpll_bypass_clk_mux_ck, CK_443X), - CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck, CK_443X), - CLK(NULL, "dpll_abe_ck", &dpll_abe_ck, CK_443X), - CLK(NULL, "dpll_abe_x2_ck", &dpll_abe_x2_ck, CK_443X), - CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, CK_443X), - CLK(NULL, "abe_24m_fclk", &abe_24m_fclk, CK_443X), - CLK(NULL, "abe_clk", &abe_clk, CK_443X), - CLK(NULL, "aess_fclk", &aess_fclk, CK_443X), - CLK(NULL, "dpll_abe_m3x2_ck", &dpll_abe_m3x2_ck, CK_443X), - CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck, CK_443X), - CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_443X), - CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_443X), - CLK(NULL, "dpll_core_m6x2_ck", &dpll_core_m6x2_ck, CK_443X), - CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck, CK_443X), - CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck, CK_443X), - CLK(NULL, "ddrphy_ck", &ddrphy_ck, CK_443X), - CLK(NULL, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, CK_443X), - CLK(NULL, "div_core_ck", &div_core_ck, CK_443X), - CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk, CK_443X), - CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk, CK_443X), - CLK(NULL, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck, CK_443X), - CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck, CK_443X), - CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck, CK_443X), - CLK(NULL, "dpll_core_m3x2_ck", &dpll_core_m3x2_ck, CK_443X), - CLK(NULL, "dpll_core_m7x2_ck", &dpll_core_m7x2_ck, CK_443X), - CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck, CK_443X), - CLK(NULL, "dpll_iva_ck", &dpll_iva_ck, CK_443X), - CLK(NULL, "dpll_iva_x2_ck", &dpll_iva_x2_ck, CK_443X), - CLK(NULL, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck, CK_443X), - CLK(NULL, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck, CK_443X), - CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_443X), - CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_443X), - CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck, CK_443X), - CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck, CK_443X), - CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_443X), - CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_443X), - CLK(NULL, "dpll_per_x2_ck", &dpll_per_x2_ck, CK_443X), - CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, CK_443X), - CLK(NULL, "dpll_per_m3x2_ck", &dpll_per_m3x2_ck, CK_443X), - CLK(NULL, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, CK_443X), - CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, CK_443X), - CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck, CK_443X), - CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck, CK_443X), - CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck, CK_443X), - CLK(NULL, "dpll_usb_ck", &dpll_usb_ck, CK_443X), - CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck, CK_443X), - CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck, CK_443X), - CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck, CK_443X), - CLK(NULL, "func_12m_fclk", &func_12m_fclk, CK_443X), - CLK(NULL, "func_24m_clk", &func_24m_clk, CK_443X), - CLK(NULL, "func_24mc_fclk", &func_24mc_fclk, CK_443X), - CLK(NULL, "func_48m_fclk", &func_48m_fclk, CK_443X), - CLK(NULL, "func_48mc_fclk", &func_48mc_fclk, CK_443X), - CLK(NULL, "func_64m_fclk", &func_64m_fclk, CK_443X), - CLK(NULL, "func_96m_fclk", &func_96m_fclk, CK_443X), - CLK(NULL, "init_60m_fclk", &init_60m_fclk, CK_443X), - CLK(NULL, "l3_div_ck", &l3_div_ck, CK_443X), - CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X), - CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X), - CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X), - CLK("smp_twd", NULL, &mpu_periphclk, CK_443X), - CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X), - CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X), - CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), - CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X), - CLK(NULL, "aes1_fck", &aes1_fck, CK_443X), - CLK(NULL, "aes2_fck", &aes2_fck, CK_443X), - CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X), - CLK(NULL, "div_ts_ck", &div_ts_ck, CK_446X), - CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk, CK_446X), - CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), - CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk, CK_443X), - CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X), - CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), - CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), - CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), - CLK(NULL, "dss_fck", &dss_fck, CK_443X), - CLK("omapdss_dss", "ick", &dss_fck, CK_443X), - CLK(NULL, "fdif_fck", &fdif_fck, CK_443X), - CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_443X), - CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_443X), - CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_443X), - CLK(NULL, "gpio4_dbclk", &gpio4_dbclk, CK_443X), - CLK(NULL, "gpio5_dbclk", &gpio5_dbclk, CK_443X), - CLK(NULL, "gpio6_dbclk", &gpio6_dbclk, CK_443X), - CLK(NULL, "sgx_clk_mux", &sgx_clk_mux, CK_443X), - CLK(NULL, "hsi_fck", &hsi_fck, CK_443X), - CLK(NULL, "iss_ctrlclk", &iss_ctrlclk, CK_443X), - CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk, CK_443X), - CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk, CK_443X), - CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk, CK_443X), - CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk, CK_443X), - CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X), - CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X), - CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X), - CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X), - CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), - CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X), - CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X), - CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2, CK_443X), - CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk, CK_443X), - CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1, CK_443X), - CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0, CK_443X), - CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk, CK_443X), - CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X), - CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X), - CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X), - CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux, CK_443X), - CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux, CK_443X), - CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux, CK_443X), - CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux, CK_443X), - CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux, CK_443X), - CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux, CK_443X), - CLK(NULL, "timer5_sync_mux", &timer5_sync_mux, CK_443X), - CLK(NULL, "timer6_sync_mux", &timer6_sync_mux, CK_443X), - CLK(NULL, "timer7_sync_mux", &timer7_sync_mux, CK_443X), - CLK(NULL, "timer8_sync_mux", &timer8_sync_mux, CK_443X), - CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux, CK_443X), - CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), - CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X), - CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), - CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), - CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), - CLK(NULL, "usb_host_hs_utmi_p2_clk", &usb_host_hs_utmi_p2_clk, CK_443X), - CLK(NULL, "usb_host_hs_utmi_p3_clk", &usb_host_hs_utmi_p3_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic480m_p1_clk", &usb_host_hs_hsic480m_p1_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic60m_p1_clk", &usb_host_hs_hsic60m_p1_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), - CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), - CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X), - CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X), - CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), - CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), - CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick, CK_443X), - CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), - CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X), - CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X), - CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), - CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), - CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X), - CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK(NULL, "usim_ck", &usim_ck, CK_443X), - CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), - CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X), - CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X), - CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X), - CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X), - CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck, CK_443X), - CLK(NULL, "auxclk0_ck", &auxclk0_ck, CK_443X), - CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck, CK_443X), - CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck, CK_443X), - CLK(NULL, "auxclk1_ck", &auxclk1_ck, CK_443X), - CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck, CK_443X), - CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck, CK_443X), - CLK(NULL, "auxclk2_ck", &auxclk2_ck, CK_443X), - CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck, CK_443X), - CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck, CK_443X), - CLK(NULL, "auxclk3_ck", &auxclk3_ck, CK_443X), - CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck, CK_443X), - CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck, CK_443X), - CLK(NULL, "auxclk4_ck", &auxclk4_ck, CK_443X), - CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck, CK_443X), - CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X), - CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), - CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), - CLK("omap-gpmc", "fck", &dummy_ck, CK_443X), - CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X), - CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), - CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), - CLK("omap_i2c.4", "ick", &dummy_ck, CK_443X), - CLK(NULL, "mailboxes_ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.0", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.1", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.2", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.3", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.4", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X), - CLK(NULL, "uart1_ick", &dummy_ck, CK_443X), - CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), - CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), - CLK(NULL, "uart4_ick", &dummy_ck, CK_443X), - CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X), - CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X), - CLK("usbhs_tll", "usbtll_fck", &dummy_ck, CK_443X), - CLK("omap_wdt", "ick", &dummy_ck, CK_443X), - CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X), + CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck), + CLK(NULL, "pad_clks_src_ck", &pad_clks_src_ck), + CLK(NULL, "pad_clks_ck", &pad_clks_ck), + CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck), + CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck), + CLK(NULL, "slimbus_src_clk", &slimbus_src_clk), + CLK(NULL, "slimbus_clk", &slimbus_clk), + CLK(NULL, "sys_32k_ck", &sys_32k_ck), + CLK(NULL, "virt_12000000_ck", &virt_12000000_ck), + CLK(NULL, "virt_13000000_ck", &virt_13000000_ck), + CLK(NULL, "virt_16800000_ck", &virt_16800000_ck), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), + CLK(NULL, "virt_27000000_ck", &virt_27000000_ck), + CLK(NULL, "virt_38400000_ck", &virt_38400000_ck), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck), + CLK(NULL, "tie_low_clock_ck", &tie_low_clock_ck), + CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck), + CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck), + CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck), + CLK(NULL, "xclk60motg_ck", &xclk60motg_ck), + CLK(NULL, "abe_dpll_bypass_clk_mux_ck", &abe_dpll_bypass_clk_mux_ck), + CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck), + CLK(NULL, "dpll_abe_ck", &dpll_abe_ck), + CLK(NULL, "dpll_abe_x2_ck", &dpll_abe_x2_ck), + CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck), + CLK(NULL, "abe_24m_fclk", &abe_24m_fclk), + CLK(NULL, "abe_clk", &abe_clk), + CLK(NULL, "aess_fclk", &aess_fclk), + CLK(NULL, "dpll_abe_m3x2_ck", &dpll_abe_m3x2_ck), + CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck), + CLK(NULL, "dpll_core_ck", &dpll_core_ck), + CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck), + CLK(NULL, "dpll_core_m6x2_ck", &dpll_core_m6x2_ck), + CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck), + CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck), + CLK(NULL, "ddrphy_ck", &ddrphy_ck), + CLK(NULL, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck), + CLK(NULL, "div_core_ck", &div_core_ck), + CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk), + CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk), + CLK(NULL, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck), + CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck), + CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck), + CLK(NULL, "dpll_core_m3x2_ck", &dpll_core_m3x2_ck), + CLK(NULL, "dpll_core_m7x2_ck", &dpll_core_m7x2_ck), + CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck), + CLK(NULL, "dpll_iva_ck", &dpll_iva_ck), + CLK(NULL, "dpll_iva_x2_ck", &dpll_iva_x2_ck), + CLK(NULL, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck), + CLK(NULL, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck), + CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck), + CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck), + CLK(NULL, "dpll_per_ck", &dpll_per_ck), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck), + CLK(NULL, "dpll_per_x2_ck", &dpll_per_x2_ck), + CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck), + CLK(NULL, "dpll_per_m3x2_ck", &dpll_per_m3x2_ck), + CLK(NULL, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck), + CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck), + CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck), + CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck), + CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck), + CLK(NULL, "dpll_usb_ck", &dpll_usb_ck), + CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck), + CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck), + CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck), + CLK(NULL, "func_12m_fclk", &func_12m_fclk), + CLK(NULL, "func_24m_clk", &func_24m_clk), + CLK(NULL, "func_24mc_fclk", &func_24mc_fclk), + CLK(NULL, "func_48m_fclk", &func_48m_fclk), + CLK(NULL, "func_48mc_fclk", &func_48mc_fclk), + CLK(NULL, "func_64m_fclk", &func_64m_fclk), + CLK(NULL, "func_96m_fclk", &func_96m_fclk), + CLK(NULL, "init_60m_fclk", &init_60m_fclk), + CLK(NULL, "l3_div_ck", &l3_div_ck), + CLK(NULL, "l4_div_ck", &l4_div_ck), + CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck), + CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck), + CLK("smp_twd", NULL, &mpu_periphclk), + CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk), + CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk), + CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk), + CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck), + CLK(NULL, "aes1_fck", &aes1_fck), + CLK(NULL, "aes2_fck", &aes2_fck), + CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck), + CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk), + CLK(NULL, "dss_sys_clk", &dss_sys_clk), + CLK(NULL, "dss_tv_clk", &dss_tv_clk), + CLK(NULL, "dss_dss_clk", &dss_dss_clk), + CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk), + CLK(NULL, "dss_fck", &dss_fck), + CLK("omapdss_dss", "ick", &dss_fck), + CLK(NULL, "fdif_fck", &fdif_fck), + CLK(NULL, "gpio1_dbclk", &gpio1_dbclk), + CLK(NULL, "gpio2_dbclk", &gpio2_dbclk), + CLK(NULL, "gpio3_dbclk", &gpio3_dbclk), + CLK(NULL, "gpio4_dbclk", &gpio4_dbclk), + CLK(NULL, "gpio5_dbclk", &gpio5_dbclk), + CLK(NULL, "gpio6_dbclk", &gpio6_dbclk), + CLK(NULL, "sgx_clk_mux", &sgx_clk_mux), + CLK(NULL, "hsi_fck", &hsi_fck), + CLK(NULL, "iss_ctrlclk", &iss_ctrlclk), + CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck), + CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk), + CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck), + CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk), + CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck), + CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk), + CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck), + CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk), + CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck), + CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk), + CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk), + CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk), + CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m), + CLK(NULL, "sha2md5_fck", &sha2md5_fck), + CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1), + CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0), + CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2), + CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk), + CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1), + CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0), + CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk), + CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck), + CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck), + CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck), + CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux), + CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux), + CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux), + CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux), + CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux), + CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux), + CLK(NULL, "timer5_sync_mux", &timer5_sync_mux), + CLK(NULL, "timer6_sync_mux", &timer6_sync_mux), + CLK(NULL, "timer7_sync_mux", &timer7_sync_mux), + CLK(NULL, "timer8_sync_mux", &timer8_sync_mux), + CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux), + CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck), + CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck), + CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk), + CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk), + CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk), + CLK(NULL, "usb_host_hs_utmi_p2_clk", &usb_host_hs_utmi_p2_clk), + CLK(NULL, "usb_host_hs_utmi_p3_clk", &usb_host_hs_utmi_p3_clk), + CLK(NULL, "usb_host_hs_hsic480m_p1_clk", &usb_host_hs_hsic480m_p1_clk), + CLK(NULL, "usb_host_hs_hsic60m_p1_clk", &usb_host_hs_hsic60m_p1_clk), + CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk), + CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk), + CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk), + CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck), + CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck), + CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk), + CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk), + CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick), + CLK("musb-omap2430", "ick", &usb_otg_hs_ick), + CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k), + CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk), + CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk), + CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk), + CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick), + CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick), + CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick), + CLK(NULL, "usim_ck", &usim_ck), + CLK(NULL, "usim_fclk", &usim_fclk), + CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck), + CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck), + CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck), + CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck), + CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck), + CLK(NULL, "auxclk0_ck", &auxclk0_ck), + CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck), + CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck), + CLK(NULL, "auxclk1_ck", &auxclk1_ck), + CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck), + CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck), + CLK(NULL, "auxclk2_ck", &auxclk2_ck), + CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck), + CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck), + CLK(NULL, "auxclk3_ck", &auxclk3_ck), + CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck), + CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck), + CLK(NULL, "auxclk4_ck", &auxclk4_ck), + CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck), + CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck), + CLK(NULL, "auxclk5_ck", &auxclk5_ck), + CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck), + CLK("omap-gpmc", "fck", &dummy_ck), + CLK("omap_i2c.1", "ick", &dummy_ck), + CLK("omap_i2c.2", "ick", &dummy_ck), + CLK("omap_i2c.3", "ick", &dummy_ck), + CLK("omap_i2c.4", "ick", &dummy_ck), + CLK(NULL, "mailboxes_ick", &dummy_ck), + CLK("omap_hsmmc.0", "ick", &dummy_ck), + CLK("omap_hsmmc.1", "ick", &dummy_ck), + CLK("omap_hsmmc.2", "ick", &dummy_ck), + CLK("omap_hsmmc.3", "ick", &dummy_ck), + CLK("omap_hsmmc.4", "ick", &dummy_ck), + CLK("omap-mcbsp.1", "ick", &dummy_ck), + CLK("omap-mcbsp.2", "ick", &dummy_ck), + CLK("omap-mcbsp.3", "ick", &dummy_ck), + CLK("omap-mcbsp.4", "ick", &dummy_ck), + CLK("omap2_mcspi.1", "ick", &dummy_ck), + CLK("omap2_mcspi.2", "ick", &dummy_ck), + CLK("omap2_mcspi.3", "ick", &dummy_ck), + CLK("omap2_mcspi.4", "ick", &dummy_ck), + CLK(NULL, "uart1_ick", &dummy_ck), + CLK(NULL, "uart2_ick", &dummy_ck), + CLK(NULL, "uart3_ick", &dummy_ck), + CLK(NULL, "uart4_ick", &dummy_ck), + CLK("usbhs_omap", "usbhost_ick", &dummy_ck), + CLK("usbhs_omap", "usbtll_fck", &dummy_ck), + CLK("usbhs_tll", "usbtll_fck", &dummy_ck), + CLK("omap_wdt", "ick", &dummy_ck), + CLK(NULL, "timer_32k_ck", &sys_32k_ck), /* TODO: Remove "omap_timer.X" aliases once DT migration is complete */ - CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), + CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck), + CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck), + CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck), + CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck), + CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK(NULL, "cpufreq_ck", &dpll_mpu_ck), }; int __init omap4xxx_clk_init(void) { - u32 cpu_clkflg; - struct omap_clk *c; int rc; if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; - cpu_clkflg = CK_443X; + omap_clocks_register(omap443x_clks, ARRAY_SIZE(omap443x_clks)); } else if (cpu_is_omap446x() || cpu_is_omap447x()) { cpu_mask = RATE_IN_4460 | RATE_IN_4430; - cpu_clkflg = CK_446X | CK_443X; - + omap_clocks_register(omap446x_clks, ARRAY_SIZE(omap446x_clks)); if (cpu_is_omap447x()) pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); } else { return 0; } - for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); - c++) { - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } - } + omap_clocks_register(omap44xx_clks, ARRAY_SIZE(omap44xx_clks)); omap2_clk_disable_autoidle_all(); @@ -1705,5 +1718,13 @@ int __init omap4xxx_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + /* + * Lock USB DPLL on OMAP4 devices so that the L3INIT power + * domain can transition to retention state when not in use. + */ + rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ); + if (rc) + pr_err("%s: failed to configure USB DPLL!\n", __func__); + return 0; } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 2191f25ad21b..0c38ca96c840 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -23,7 +23,7 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/bitops.h> - +#include <linux/clk-private.h> #include <asm/cpu.h> @@ -569,6 +569,21 @@ const struct clk_hw_omap_ops clkhwops_wait = { }; /** + * omap_clocks_register - register an array of omap_clk + * @ocs: pointer to an array of omap_clk to register + */ +void __init omap_clocks_register(struct omap_clk oclks[], int cnt) +{ + struct omap_clk *c; + + for (c = oclks; c < oclks + cnt; c++) { + clkdev_add(&c->lk); + if (!__clk_init(NULL, c->lk.clk)) + omap2_init_clk_hw_omap_clocks(c->lk.clk); + } +} + +/** * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument * @mpurate_ck_name: clk name of the clock to change rate * diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 60ddd8612b4d..7aa32cd292f9 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -27,9 +27,8 @@ struct omap_clk { struct clk_lookup lk; }; -#define CLK(dev, con, ck, cp) \ +#define CLK(dev, con, ck) \ { \ - .cpu = cp, \ .lk = { \ .dev_id = dev, \ .con_id = con, \ @@ -37,22 +36,6 @@ struct omap_clk { }, \ } -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_242X (1 << 0) -#define CK_243X (1 << 1) /* 243x, 253x */ -#define CK_3430ES1 (1 << 2) /* 34xxES1 only */ -#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */ -#define CK_AM35XX (1 << 4) /* Sitara AM35xx */ -#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */ -#define CK_443X (1 << 6) -#define CK_TI816X (1 << 7) -#define CK_446X (1 << 8) -#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */ - - -#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) - struct clockdomain; #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) @@ -480,4 +463,5 @@ extern int am33xx_clk_init(void); extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); +extern void omap_clocks_register(struct omap_clk *oclks, int cnt); #endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index bf70e2b57ff8..d555cf2459e1 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -109,6 +109,14 @@ void am35xx_init_late(void); void ti81xx_init_late(void); int omap2_common_pm_late_init(void); +#ifdef CONFIG_SOC_BUS +void omap_soc_device_init(void); +#else +static inline void omap_soc_device_init(void) +{ +} +#endif + #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) void omap2xxx_restart(char mode, const char *cmd); #else @@ -248,7 +256,6 @@ extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state); extern int omap4_finish_suspend(unsigned long cpu_state); extern void omap4_cpu_resume(void); extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state); -extern u32 omap4_mpuss_read_prev_context_state(void); #else static inline int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) @@ -276,10 +283,6 @@ static inline int omap4_finish_suspend(unsigned long cpu_state) static inline void omap4_cpu_resume(void) {} -static inline u32 omap4_mpuss_read_prev_context_state(void) -{ - return 0; -} #endif struct omap_sdrc_params; @@ -292,5 +295,8 @@ extern void omap_reserve(void); struct omap_hwmod; extern int omap_dss_reset(struct omap_hwmod *); +/* SoC specific clock initializer */ +extern int (*omap_clk_init)(void); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 80392fca86c6..e18709d3b95d 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -26,6 +26,7 @@ #include <linux/cpuidle.h> #include <linux/export.h> #include <linux/cpu_pm.h> +#include <asm/cpuidle.h> #include "powerdomain.h" #include "clockdomain.h" @@ -99,16 +100,18 @@ static struct omap3_idle_statedata omap3_idle_data[] = { }, }; -/* Private functions */ - -static int __omap3_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) +/** + * omap3_enter_idle - Programs OMAP3 to enter the specified state + * @dev: cpuidle device + * @drv: cpuidle driver + * @index: the index of state to be entered + */ +static int omap3_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) { struct omap3_idle_statedata *cx = &omap3_idle_data[index]; - local_fiq_disable(); - if (omap_irq_pending() || need_resched()) goto return_sleep_time; @@ -143,28 +146,11 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]); return_sleep_time: - local_fiq_enable(); return index; } /** - * omap3_enter_idle - Programs OMAP3 to enter the specified state - * @dev: cpuidle device - * @drv: cpuidle driver - * @index: the index of state to be entered - * - * Called from the CPUidle framework to program the device to the - * specified target state selected by the governor. - */ -static inline int omap3_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - return cpuidle_wrap_enter(dev, drv, index, __omap3_enter_idle); -} - -/** * next_valid_state - Find next valid C-state * @dev: cpuidle device * @drv: cpuidle driver @@ -271,11 +257,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, return ret; } -static DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); - static struct cpuidle_driver omap3_idle_driver = { - .name = "omap3_idle", - .owner = THIS_MODULE, + .name = "omap3_idle", + .owner = THIS_MODULE, .states = { { .enter = omap3_enter_idle_bm, @@ -348,8 +332,6 @@ static struct cpuidle_driver omap3_idle_driver = { */ int __init omap3_idle_init(void) { - struct cpuidle_device *dev; - mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); per_pd = pwrdm_lookup("per_pwrdm"); @@ -358,16 +340,5 @@ int __init omap3_idle_init(void) if (!mpu_pd || !core_pd || !per_pd || !cam_pd) return -ENODEV; - cpuidle_register_driver(&omap3_idle_driver); - - dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - dev->cpu = 0; - - if (cpuidle_register_device(dev)) { - printk(KERN_ERR "%s: CPUidle register device failed\n", - __func__); - return -EIO; - } - - return 0; + return cpuidle_register(&omap3_idle_driver, NULL); } diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index d639aef0deda..c443f2e97e10 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -1,7 +1,7 @@ /* - * OMAP4 CPU idle Routines + * OMAP4+ CPU idle Routines * - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011-2013 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> * Rajendra Nayak <rnayak@ti.com> * @@ -14,8 +14,8 @@ #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/export.h> -#include <linux/clockchips.h> +#include <asm/cpuidle.h> #include <asm/proc-fns.h> #include "common.h" @@ -24,13 +24,13 @@ #include "clockdomain.h" /* Machine specific information */ -struct omap4_idle_statedata { +struct idle_statedata { u32 cpu_state; u32 mpu_logic_state; u32 mpu_state; }; -static struct omap4_idle_statedata omap4_idle_data[] = { +static struct idle_statedata omap4_idle_data[] = { { .cpu_state = PWRDM_POWER_ON, .mpu_state = PWRDM_POWER_ON, @@ -53,11 +53,12 @@ static struct clockdomain *cpu_clkdm[NR_CPUS]; static atomic_t abort_barrier; static bool cpu_done[NR_CPUS]; +static struct idle_statedata *state_ptr = &omap4_idle_data[0]; /* Private functions */ /** - * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions + * omap_enter_idle_[simple/coupled] - OMAP4PLUS cpuidle entry functions * @dev: cpuidle device * @drv: cpuidle driver * @index: the index of state to be entered @@ -66,25 +67,19 @@ static bool cpu_done[NR_CPUS]; * specified low power state selected by the governor. * Returns the amount of time spent in the low power state. */ -static int omap4_enter_idle_simple(struct cpuidle_device *dev, +static int omap_enter_idle_simple(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - local_fiq_disable(); omap_do_wfi(); - local_fiq_enable(); - return index; } -static int omap4_enter_idle_coupled(struct cpuidle_device *dev, +static int omap_enter_idle_coupled(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct omap4_idle_statedata *cx = &omap4_idle_data[index]; - int cpu_id = smp_processor_id(); - - local_fiq_disable(); + struct idle_statedata *cx = state_ptr + index; /* * CPU0 has to wait and stay ON until CPU1 is OFF state. @@ -109,8 +104,6 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev, } } - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); - /* * Call idle CPU PM enter notifier chain so that * VFP and per CPU interrupt context is saved. @@ -136,6 +129,7 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev, /* Wakeup CPU1 only if it is not offlined */ if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { clkdm_wakeup(cpu_clkdm[1]); + omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON); clkdm_allow_idle(cpu_clkdm[1]); } @@ -149,63 +143,49 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev, * Call idle CPU cluster PM exit notifier chain * to restore GIC and wakeupgen context. */ - if (omap4_mpuss_read_prev_context_state()) + if ((cx->mpu_state == PWRDM_POWER_RET) && + (cx->mpu_logic_state == PWRDM_POWER_OFF)) cpu_cluster_pm_exit(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); - fail: cpuidle_coupled_parallel_barrier(dev, &abort_barrier); cpu_done[dev->cpu] = false; - local_fiq_enable(); - return index; } -/* - * For each cpu, setup the broadcast timer because local timers - * stops for the states above C1. - */ -static void omap_setup_broadcast_timer(void *arg) -{ - int cpu = smp_processor_id(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); -} - -static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); - static struct cpuidle_driver omap4_idle_driver = { .name = "omap4_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states = { { /* C1 - CPU0 ON + CPU1 ON + MPU ON */ .exit_latency = 2 + 2, .target_residency = 5, .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle_simple, + .enter = omap_enter_idle_simple, .name = "C1", - .desc = "MPUSS ON" + .desc = "CPUx ON, MPUSS ON" }, { /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, - .enter = omap4_enter_idle_coupled, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED | + CPUIDLE_FLAG_TIMER_STOP, + .enter = omap_enter_idle_coupled, .name = "C2", - .desc = "MPUSS CSWR", + .desc = "CPUx OFF, MPUSS CSWR", }, { /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ .exit_latency = 460 + 518, .target_residency = 1100, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, - .enter = omap4_enter_idle_coupled, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED | + CPUIDLE_FLAG_TIMER_STOP, + .enter = omap_enter_idle_coupled, .name = "C3", - .desc = "MPUSS OSWR", + .desc = "CPUx OFF, MPUSS OSWR", }, }, .state_count = ARRAY_SIZE(omap4_idle_data), @@ -215,16 +195,13 @@ static struct cpuidle_driver omap4_idle_driver = { /* Public functions */ /** - * omap4_idle_init - Init routine for OMAP4 idle + * omap4_idle_init - Init routine for OMAP4+ idle * - * Registers the OMAP4 specific cpuidle driver to the cpuidle + * Registers the OMAP4+ specific cpuidle driver to the cpuidle * framework with the valid set of states. */ int __init omap4_idle_init(void) { - struct cpuidle_device *dev; - unsigned int cpu_id = 0; - mpu_pd = pwrdm_lookup("mpu_pwrdm"); cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm"); cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm"); @@ -236,22 +213,5 @@ int __init omap4_idle_init(void) if (!cpu_clkdm[0] || !cpu_clkdm[1]) return -ENODEV; - /* Configure the broadcast timer on each cpu */ - on_each_cpu(omap_setup_broadcast_timer, NULL, 1); - - for_each_cpu(cpu_id, cpu_online_mask) { - dev = &per_cpu(omap4_idle_dev, cpu_id); - dev->cpu = cpu_id; -#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED - dev->coupled_cpus = *cpu_online_mask; -#endif - cpuidle_register_driver(&omap4_idle_driver); - - if (cpuidle_register_device(dev)) { - pr_err("%s: CPUidle register failed\n", __func__); - return -EIO; - } - } - - return 0; + return cpuidle_register(&omap4_idle_driver, cpu_online_mask); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 1ec7f0597710..4269fc145698 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -504,140 +504,31 @@ static void omap_init_rng(void) WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n"); } -#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE) - -#ifdef CONFIG_ARCH_OMAP2 -static struct resource omap2_sham_resources[] = { - { - .start = OMAP24XX_SEC_SHA1MD5_BASE, - .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64, - .flags = IORESOURCE_MEM, - }, - { - .start = 51 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - } -}; -static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources); -#else -#define omap2_sham_resources NULL -#define omap2_sham_resources_sz 0 -#endif - -#ifdef CONFIG_ARCH_OMAP3 -static struct resource omap3_sham_resources[] = { - { - .start = OMAP34XX_SEC_SHA1MD5_BASE, - .end = OMAP34XX_SEC_SHA1MD5_BASE + 0x64, - .flags = IORESOURCE_MEM, - }, - { - .start = 49 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - }, - { - .start = OMAP34XX_DMA_SHA1MD5_RX, - .flags = IORESOURCE_DMA, - } -}; -static int omap3_sham_resources_sz = ARRAY_SIZE(omap3_sham_resources); -#else -#define omap3_sham_resources NULL -#define omap3_sham_resources_sz 0 -#endif - -static struct platform_device sham_device = { - .name = "omap-sham", - .id = -1, -}; - -static void omap_init_sham(void) +static void __init omap_init_sham(void) { - if (cpu_is_omap24xx()) { - sham_device.resource = omap2_sham_resources; - sham_device.num_resources = omap2_sham_resources_sz; - } else if (cpu_is_omap34xx()) { - sham_device.resource = omap3_sham_resources; - sham_device.num_resources = omap3_sham_resources_sz; - } else { - pr_err("%s: platform not supported\n", __func__); - return; - } - platform_device_register(&sham_device); -} -#else -static inline void omap_init_sham(void) { } -#endif - -#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE) - -#ifdef CONFIG_ARCH_OMAP2 -static struct resource omap2_aes_resources[] = { - { - .start = OMAP24XX_SEC_AES_BASE, - .end = OMAP24XX_SEC_AES_BASE + 0x4C, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP24XX_DMA_AES_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = OMAP24XX_DMA_AES_RX, - .flags = IORESOURCE_DMA, - } -}; -static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources); -#else -#define omap2_aes_resources NULL -#define omap2_aes_resources_sz 0 -#endif + struct omap_hwmod *oh; + struct platform_device *pdev; -#ifdef CONFIG_ARCH_OMAP3 -static struct resource omap3_aes_resources[] = { - { - .start = OMAP34XX_SEC_AES_BASE, - .end = OMAP34XX_SEC_AES_BASE + 0x4C, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP34XX_DMA_AES2_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = OMAP34XX_DMA_AES2_RX, - .flags = IORESOURCE_DMA, - } -}; -static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources); -#else -#define omap3_aes_resources NULL -#define omap3_aes_resources_sz 0 -#endif + oh = omap_hwmod_lookup("sham"); + if (!oh) + return; -static struct platform_device aes_device = { - .name = "omap-aes", - .id = -1, -}; + pdev = omap_device_build("omap-sham", -1, oh, NULL, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-sham\n"); +} -static void omap_init_aes(void) +static void __init omap_init_aes(void) { - if (cpu_is_omap24xx()) { - aes_device.resource = omap2_aes_resources; - aes_device.num_resources = omap2_aes_resources_sz; - } else if (cpu_is_omap34xx()) { - aes_device.resource = omap3_aes_resources; - aes_device.num_resources = omap3_aes_resources_sz; - } else { - pr_err("%s: platform not supported\n", __func__); + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("aes"); + if (!oh) return; - } - platform_device_register(&aes_device); -} -#else -static inline void omap_init_aes(void) { } -#endif + pdev = omap_device_build("omap-aes", -1, oh, NULL, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-aes\n"); +} /*-------------------------------------------------------------------------*/ @@ -764,11 +655,11 @@ static int __init omap2_init_devices(void) omap_init_dmic(); omap_init_mcpdm(); omap_init_mcspi(); + omap_init_sham(); + omap_init_aes(); } omap_init_sti(); omap_init_rng(); - omap_init_sham(); - omap_init_aes(); omap_init_vout(); omap_init_ocp2scp(); diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h index eba80dbc5218..65f80cacf178 100644 --- a/arch/arm/mach-omap2/dma.h +++ b/arch/arm/mach-omap2/dma.h @@ -22,69 +22,20 @@ /* DMA channels for 24xx */ #define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ #define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ #define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ #define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ #define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ #define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ #define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ #define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ #define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ #define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ #define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ #define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ #define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ #define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ #define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ #define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ #define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ #define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ @@ -93,33 +44,12 @@ #define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ #define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ #define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ #define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ #define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ #define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ #define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ #define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ #define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 4be5cfc81ab8..9c49bbe825f7 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -27,9 +27,7 @@ #include <linux/gpio.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> -#include <video/omap-panel-nokia-dsi.h> -#include <video/omap-panel-picodlp.h> +#include <video/omap-panel-data.h> #include "soc.h" #include "dss-common.h" diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index ff0bc9e51aa7..0f4c18e6e60c 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -18,6 +18,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/slab.h> + +#ifdef CONFIG_SOC_BUS +#include <linux/sys_soc.h> +#endif #include <asm/cputype.h> @@ -31,8 +36,11 @@ #define OMAP4_SILICON_TYPE_STANDARD 0x01 #define OMAP4_SILICON_TYPE_PERFORMANCE 0x02 +#define OMAP_SOC_MAX_NAME_LENGTH 16 + static unsigned int omap_revision; -static const char *cpu_rev; +static char soc_name[OMAP_SOC_MAX_NAME_LENGTH]; +static char soc_rev[OMAP_SOC_MAX_NAME_LENGTH]; u32 omap_features; unsigned int omap_rev(void) @@ -169,9 +177,12 @@ void __init omap2xxx_check_revision(void) j = i; } - pr_info("OMAP%04x", omap_rev() >> 16); + sprintf(soc_name, "OMAP%04x", omap_rev() >> 16); + sprintf(soc_rev, "ES%x", (omap_rev() >> 12) & 0xf); + + pr_info("%s", soc_name); if ((omap_rev() >> 8) & 0x0f) - pr_info("ES%x", (omap_rev() >> 12) & 0xf); + pr_info("%s", soc_rev); pr_info("\n"); } @@ -211,8 +222,10 @@ static void __init omap3_cpuinfo(void) cpu_name = "OMAP3503"; } + sprintf(soc_name, "%s", cpu_name); + /* Print verbose information */ - pr_info("%s ES%s (", cpu_name, cpu_rev); + pr_info("%s %s (", soc_name, soc_rev); OMAP3_SHOW_FEATURE(l2cache); OMAP3_SHOW_FEATURE(iva); @@ -291,6 +304,7 @@ void __init ti81xx_check_features(void) void __init omap3xxx_check_revision(void) { + const char *cpu_rev; u32 cpuid, idcode; u16 hawkeye; u8 rev; @@ -300,7 +314,7 @@ void __init omap3xxx_check_revision(void) * If the processor type is Cortex-A8 and the revision is 0x0 * it means its Cortex r0p0 which is 3430 ES1.0. */ - cpuid = read_cpuid(CPUID_ID); + cpuid = read_cpuid_id(); if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) { omap_revision = OMAP3430_REV_ES1_0; cpu_rev = "1.0"; @@ -438,6 +452,7 @@ void __init omap3xxx_check_revision(void) cpu_rev = "1.2"; pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n"); } + sprintf(soc_rev, "ES%s", cpu_rev); } void __init omap4xxx_check_revision(void) @@ -460,7 +475,7 @@ void __init omap4xxx_check_revision(void) * Use ARM register to detect the correct ES version */ if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) { - idcode = read_cpuid(CPUID_ID); + idcode = read_cpuid_id(); rev = (idcode & 0xf) - 1; } @@ -512,8 +527,10 @@ void __init omap4xxx_check_revision(void) omap_revision = OMAP4430_REV_ES2_3; } - pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16, - ((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf)); + sprintf(soc_name, "OMAP%04x", omap_rev() >> 16); + sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf, + (omap_rev() >> 8) & 0xf); + pr_info("%s %s\n", soc_name, soc_rev); } void __init omap5xxx_check_revision(void) @@ -553,8 +570,10 @@ void __init omap5xxx_check_revision(void) omap_revision = OMAP5430_REV_ES2_0; } - pr_info("OMAP%04x ES%d.0\n", - omap_rev() >> 16, ((omap_rev() >> 12) & 0xf)); + sprintf(soc_name, "OMAP%04x", omap_rev() >> 16); + sprintf(soc_rev, "ES%d.0", (omap_rev() >> 12) & 0xf); + + pr_info("%s %s\n", soc_name, soc_rev); } /* @@ -575,3 +594,63 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap) else tap_prod_id = 0x0208; } + +#ifdef CONFIG_SOC_BUS + +static const char const *omap_types[] = { + [OMAP2_DEVICE_TYPE_TEST] = "TST", + [OMAP2_DEVICE_TYPE_EMU] = "EMU", + [OMAP2_DEVICE_TYPE_SEC] = "HS", + [OMAP2_DEVICE_TYPE_GP] = "GP", + [OMAP2_DEVICE_TYPE_BAD] = "BAD", +}; + +static const char * __init omap_get_family(void) +{ + if (cpu_is_omap24xx()) + return kasprintf(GFP_KERNEL, "OMAP2"); + else if (cpu_is_omap34xx()) + return kasprintf(GFP_KERNEL, "OMAP3"); + else if (cpu_is_omap44xx()) + return kasprintf(GFP_KERNEL, "OMAP4"); + else if (soc_is_omap54xx()) + return kasprintf(GFP_KERNEL, "OMAP5"); + else + return kasprintf(GFP_KERNEL, "Unknown"); +} + +static ssize_t omap_get_type(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%s\n", omap_types[omap_type()]); +} + +static struct device_attribute omap_soc_attr = + __ATTR(type, S_IRUGO, omap_get_type, NULL); + +void __init omap_soc_device_init(void) +{ + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + soc_dev_attr->machine = soc_name; + soc_dev_attr->family = omap_get_family(); + soc_dev_attr->revision = soc_rev; + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + if (!IS_ERR_OR_NULL(parent)) + device_create_file(parent, &omap_soc_attr); +} +#endif /* CONFIG_SOC_BUS */ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2bef5a7e6af8..09abf99e9e57 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -55,6 +55,12 @@ #include "prm44xx.h" /* + * omap_clk_init: points to a function that does the SoC-specific + * clock initializations + */ +int (*omap_clk_init)(void); + +/* * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ @@ -388,6 +394,13 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } +static void __init omap_common_late_init(void) +{ + omap_mux_late_init(); + omap2_common_pm_late_init(); + omap_soc_device_init(); +} + #ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { @@ -406,13 +419,12 @@ void __init omap2420_init_early(void) omap242x_clockdomains_init(); omap2420_hwmod_init(); omap_hwmod_init_postsetup(); - omap2420_clk_init(); + omap_clk_init = omap2420_clk_init; } void __init omap2420_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap2_pm_init(); omap2_clk_enable_autoidle_all(); } @@ -436,13 +448,12 @@ void __init omap2430_init_early(void) omap243x_clockdomains_init(); omap2430_hwmod_init(); omap_hwmod_init_postsetup(); - omap2430_clk_init(); + omap_clk_init = omap2430_clk_init; } void __init omap2430_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap2_pm_init(); omap2_clk_enable_autoidle_all(); } @@ -471,7 +482,7 @@ void __init omap3_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3430_init_early(void) @@ -509,53 +520,47 @@ void __init ti81xx_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init omap3430_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init omap35xx_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init omap3630_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init am35xx_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init ti81xx_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } @@ -577,7 +582,7 @@ void __init am33xx_init_early(void) am33xx_clockdomains_init(); am33xx_hwmod_init(); omap_hwmod_init_postsetup(); - am33xx_clk_init(); + omap_clk_init = am33xx_clk_init; } #endif @@ -602,13 +607,12 @@ void __init omap4430_init_early(void) omap44xx_clockdomains_init(); omap44xx_hwmod_init(); omap_hwmod_init_postsetup(); - omap4xxx_clk_init(); + omap_clk_init = omap4xxx_clk_init; } void __init omap4430_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap4_pm_init(); omap2_clk_enable_autoidle_all(); } diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index e712d1725a8b..458f72f9dc8f 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -19,11 +19,8 @@ #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> #include "omap-wakeupgen.h" - #include "common.h" - #include "powerdomain.h" /* @@ -35,9 +32,6 @@ void __ref omap4_cpu_die(unsigned int cpu) unsigned int boot_cpu = 0; void __iomem *base = omap_get_wakeupgen_base(); - flush_cache_all(); - dsb(); - /* * we're ready for shutdown now, so do it */ diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 8bcb64bcdcdb..e80327b6c81f 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -139,20 +139,6 @@ static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id) } } -/** - * omap4_mpuss_read_prev_context_state: - * Function returns the MPUSS previous context state - */ -u32 omap4_mpuss_read_prev_context_state(void) -{ - u32 reg; - - reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, - OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET); - reg &= OMAP4430_LOSTCONTEXT_DFF_MASK; - return reg; -} - /* * Store the CPU cluster state for L2X0 low power operations. */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index d9727218dd0a..2a551f997aea 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -21,7 +21,6 @@ #include <linux/io.h> #include <linux/irqchip/arm-gic.h> -#include <asm/cacheflush.h> #include <asm/smp_scu.h> #include "omap-secure.h" @@ -67,13 +66,6 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu) 4, 0, 0, 0, 0, 0); /* - * If any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); @@ -84,6 +76,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * { static struct clockdomain *cpu1_clkdm; static bool booted; + static struct powerdomain *cpu1_pwrdm; void __iomem *base = omap_get_wakeupgen_base(); /* @@ -103,11 +96,10 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * else __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0); - flush_cache_all(); - smp_wmb(); - - if (!cpu1_clkdm) + if (!cpu1_clkdm && !cpu1_pwrdm) { cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); + cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm"); + } /* * The SGI(Software Generated Interrupts) are not wakeup capable @@ -120,7 +112,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * * Section : * 4.3.4.2 Power States of CPU0 and CPU1 */ - if (booted) { + if (booted && cpu1_pwrdm && cpu1_clkdm) { /* * GIC distributor control register has changed between * CortexA9 r1pX and r2pX. The Control Register secure @@ -141,7 +133,12 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * gic_dist_disable(); } + /* + * Ensure that CPU power state is set to ON to avoid CPU + * powerdomain transition on wfi + */ clkdm_wakeup(cpu1_clkdm); + omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON); clkdm_allow_idle(cpu1_clkdm); if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { @@ -168,38 +165,6 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * return 0; } -static void __init wakeup_secondary(void) -{ - void *startup_addr = omap_secondary_startup; - void __iomem *base = omap_get_wakeupgen_base(); - - if (cpu_is_omap446x()) { - startup_addr = omap_secondary_startup_4460; - pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; - } - - /* - * Write the address of secondary startup routine into the - * AuxCoreBoot1 where ROM code will jump and start executing - * on secondary core once out of WFE - * A barrier is added to ensure that write buffer is drained - */ - if (omap_secure_apis_support()) - omap_auxcoreboot_addr(virt_to_phys(startup_addr)); - else - __raw_writel(virt_to_phys(omap5_secondary_startup), - base + OMAP_AUX_CORE_BOOT_1); - - smp_wmb(); - - /* - * Send a 'sev' to wake the secondary core from WFE. - * Drain the outstanding writes to memory - */ - dsb_sev(); - mb(); -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -209,7 +174,7 @@ static void __init omap4_smp_init_cpus(void) unsigned int i = 0, ncores = 1, cpu_id; /* Use ARM cpuid check here, as SoC detection will not work so early */ - cpu_id = read_cpuid(CPUID_ID) & CPU_MASK; + cpu_id = read_cpuid_id() & CPU_MASK; if (cpu_id == CPU_CORTEX_A9) { /* * Currently we can't call ioremap here because @@ -235,6 +200,8 @@ static void __init omap4_smp_init_cpus(void) static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) { + void *startup_addr = omap_secondary_startup; + void __iomem *base = omap_get_wakeupgen_base(); /* * Initialise the SCU and wake up the secondary core using @@ -242,7 +209,24 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) */ if (scu_base) scu_enable(scu_base); - wakeup_secondary(); + + if (cpu_is_omap446x()) { + startup_addr = omap_secondary_startup_4460; + pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; + } + + /* + * Write the address of secondary startup routine into the + * AuxCoreBoot1 where ROM code will jump and start executing + * on secondary core once out of WFE + * A barrier is added to ensure that write buffer is drained + */ + if (omap_secure_apis_support()) + omap_auxcoreboot_addr(virt_to_phys(startup_addr)); + else + __raw_writel(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); + } struct smp_operations omap4_smp_ops __initdata = { diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 2aeb928efdfd..13b27ffaf45e 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -22,6 +22,7 @@ #include <linux/of_platform.h> #include <linux/export.h> #include <linux/irqchip/arm-gic.h> +#include <linux/of_address.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> @@ -264,6 +265,21 @@ omap_early_initcall(omap4_sar_ram_init); void __init omap_gic_of_init(void) { + struct device_node *np; + + /* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */ + if (!cpu_is_omap446x()) + goto skip_errata_init; + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic"); + gic_dist_base_addr = of_iomap(np, 0); + WARN_ON(!gic_dist_base_addr); + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer"); + twd_base = of_iomap(np, 0); + WARN_ON(!twd_base); + +skip_errata_init: omap_wakeupgen_init(); irqchip_init(); } diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index 937417523b8e..792b1069f724 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -20,13 +20,13 @@ #define SAR_BANK4_OFFSET 0x3000 /* Scratch pad memory offsets from SAR_BANK1 */ -#define SCU_OFFSET0 0xd00 -#define SCU_OFFSET1 0xd04 -#define OMAP_TYPE_OFFSET 0xd10 -#define L2X0_SAVE_OFFSET0 0xd14 -#define L2X0_SAVE_OFFSET1 0xd18 -#define L2X0_AUXCTRL_OFFSET 0xd1c -#define L2X0_PREFETCH_CTRL_OFFSET 0xd20 +#define SCU_OFFSET0 0xfe4 +#define SCU_OFFSET1 0xfe8 +#define OMAP_TYPE_OFFSET 0xfec +#define L2X0_SAVE_OFFSET0 0xff0 +#define L2X0_SAVE_OFFSET1 0xff4 +#define L2X0_AUXCTRL_OFFSET 0xff8 +#define L2X0_PREFETCH_CTRL_OFFSET 0xffc /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */ #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2520d46c8508..93f213b6a784 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -138,6 +138,7 @@ #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/bootmem.h> +#include <linux/cpu.h> #include <asm/system_misc.h> @@ -1364,7 +1365,9 @@ static void _enable_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if (oh->flags & HWMOD_FORCE_MSTANDBY) { + idlemode = HWMOD_IDLEMODE_FORCE; + } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) @@ -1436,7 +1439,8 @@ static void _idle_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if ((oh->flags & HWMOD_SWSUP_MSTANDBY) || + (oh->flags & HWMOD_FORCE_MSTANDBY)) { idlemode = HWMOD_IDLEMODE_FORCE; } else { if (sf & SYSC_HAS_ENAWAKEUP) @@ -2150,7 +2154,7 @@ static int _enable(struct omap_hwmod *oh) if (soc_ops.enable_module) soc_ops.enable_module(oh); if (oh->flags & HWMOD_BLOCK_WFI) - disable_hlt(); + cpu_idle_poll_ctrl(true); if (soc_ops.update_context_lost) soc_ops.update_context_lost(oh); @@ -2214,7 +2218,7 @@ static int _idle(struct omap_hwmod *oh) _del_initiator_dep(oh, mpu_oh); if (oh->flags & HWMOD_BLOCK_WFI) - enable_hlt(); + cpu_idle_poll_ctrl(false); if (soc_ops.disable_module) soc_ops.disable_module(oh); @@ -2324,7 +2328,7 @@ static int _shutdown(struct omap_hwmod *oh) _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ if (oh->flags & HWMOD_BLOCK_WFI) - enable_hlt(); + cpu_idle_poll_ctrl(false); if (soc_ops.disable_module) soc_ops.disable_module(oh); _disable_clocks(oh); diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 28f4dea0512e..fe5962921f07 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm { * * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out * of idle, rather than relying on module smart-idle - * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out - * of standby, rather than relying on module smart-standby + * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and + * out of standby, rather than relying on module smart-standby * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for * SDRAM controller, etc. XXX probably belongs outside the main hwmod file * XXX Should be HWMOD_SETUP_NO_RESET @@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm { * correctly, or this is being abused to deal with some PM latency * issues -- but we're currently suffering from a shortage of * folks who are able to track these issues down properly. + * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device + * is kept in force-standby mode. Failing to do so causes PM problems + * with musb on OMAP3630 at least. Note that musb has a dedicated register + * to control MSTANDBY signal when MIDLEMODE is set to force-standby. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_16BIT_REG (1 << 8) #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) +#define HWMOD_FORCE_MSTANDBY (1 << 11) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 6a764af6c6d3..5137cc84b504 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -610,6 +610,8 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__mcbsp2, &omap2420_l4_core__msdi1, &omap2xxx_l4_core__rng, + &omap2xxx_l4_core__sham, + &omap2xxx_l4_core__aes, &omap2420_l4_core__hdq1w, &omap2420_l4_wkup__counter_32k, &omap2420_l3__gpmc, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index d2d3840557c3..4ce999ee3ee9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -963,6 +963,8 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2430_l4_core__mcbsp5, &omap2430_l4_core__hdq1w, &omap2xxx_l4_core__rng, + &omap2xxx_l4_core__sham, + &omap2xxx_l4_core__aes, &omap2430_l4_wkup__counter_32k, &omap2430_l3__gpmc, NULL, diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 47901a5e76de..5fd40d4a989e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -138,6 +138,24 @@ static struct omap_hwmod_addr_space omap2_rng_addr_space[] = { { } }; +static struct omap_hwmod_addr_space omap2xxx_sham_addrs[] = { + { + .pa_start = 0x480a4000, + .pa_end = 0x480a4000 + 0x64 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_addr_space omap2xxx_aes_addrs[] = { + { + .pa_start = 0x480a6000, + .pa_end = 0x480a6000 + 0x50 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + /* * Common interconnect data */ @@ -389,3 +407,21 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = { .addr = omap2_rng_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; + +/* l4 core -> sham interface */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_sham_hwmod, + .clk = "sha_ick", + .addr = omap2xxx_sham_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> aes interface */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__aes = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_aes_hwmod, + .clk = "aes_ick", + .addr = omap2xxx_aes_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index e596117004d4..c8c64b3e1acc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -864,3 +864,84 @@ struct omap_hwmod omap2xxx_rng_hwmod = { .flags = HWMOD_INIT_NO_RESET, .class = &omap2_rng_hwmod_class, }; + +/* SHAM */ + +static struct omap_hwmod_class_sysconfig omap2_sham_sysc = { + .rev_offs = 0x5c, + .sysc_offs = 0x60, + .syss_offs = 0x64, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_sham_class = { + .name = "sham", + .sysc = &omap2_sham_sysc, +}; + +static struct omap_hwmod_irq_info omap2_sham_mpu_irqs[] = { + { .irq = 51 + OMAP_INTC_START, }, + { .irq = -1 } +}; + +static struct omap_hwmod_dma_info omap2_sham_sdma_chs[] = { + { .name = "rx", .dma_req = 13 }, + { .dma_req = -1 } +}; + +struct omap_hwmod omap2xxx_sham_hwmod = { + .name = "sham", + .mpu_irqs = omap2_sham_mpu_irqs, + .sdma_reqs = omap2_sham_sdma_chs, + .main_clk = "l4_ck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 4, + .module_bit = OMAP24XX_EN_SHA_SHIFT, + .idlest_reg_id = 4, + .idlest_idle_bit = OMAP24XX_ST_SHA_SHIFT, + }, + }, + .class = &omap2xxx_sham_class, +}; + +/* AES */ + +static struct omap_hwmod_class_sysconfig omap2_aes_sysc = { + .rev_offs = 0x44, + .sysc_offs = 0x48, + .syss_offs = 0x4c, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_aes_class = { + .name = "aes", + .sysc = &omap2_aes_sysc, +}; + +static struct omap_hwmod_dma_info omap2_aes_sdma_chs[] = { + { .name = "tx", .dma_req = 9 }, + { .name = "rx", .dma_req = 10 }, + { .dma_req = -1 } +}; + +struct omap_hwmod omap2xxx_aes_hwmod = { + .name = "aes", + .sdma_reqs = omap2_aes_sdma_chs, + .main_clk = "l4_ck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 4, + .module_bit = OMAP24XX_EN_AES_SHIFT, + .idlest_reg_id = 4, + .idlest_idle_bit = OMAP24XX_ST_AES_SHIFT, + }, + }, + .class = &omap2xxx_aes_class, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 31bea1ce3de1..01d8f324450a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -418,8 +418,6 @@ static struct omap_hwmod am33xx_adc_tsc_hwmod = { * - clkdiv32k * - debugss * - ocp watch point - * - aes0 - * - sha0 */ #if 0 /* @@ -500,25 +498,41 @@ static struct omap_hwmod am33xx_ocpwp_hwmod = { }, }, }; +#endif /* - * 'aes' class + * 'aes0' class */ -static struct omap_hwmod_class am33xx_aes_hwmod_class = { - .name = "aes", +static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = { + .rev_offs = 0x80, + .sysc_offs = 0x84, + .syss_offs = 0x88, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class am33xx_aes0_hwmod_class = { + .name = "aes0", + .sysc = &am33xx_aes0_sysc, }; static struct omap_hwmod_irq_info am33xx_aes0_irqs[] = { - { .irq = 102 + OMAP_INTC_START, }, + { .irq = 103 + OMAP_INTC_START, }, { .irq = -1 }, }; +static struct omap_hwmod_dma_info am33xx_aes0_edma_reqs[] = { + { .name = "tx", .dma_req = 6, }, + { .name = "rx", .dma_req = 5, }, + { .dma_req = -1 } +}; + static struct omap_hwmod am33xx_aes0_hwmod = { - .name = "aes0", - .class = &am33xx_aes_hwmod_class, + .name = "aes", + .class = &am33xx_aes0_hwmod_class, .clkdm_name = "l3_clkdm", .mpu_irqs = am33xx_aes0_irqs, - .main_clk = "l3_gclk", + .sdma_reqs = am33xx_aes0_edma_reqs, + .main_clk = "aes0_fck", .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_PER_AES0_CLKCTRL_OFFSET, @@ -527,21 +541,35 @@ static struct omap_hwmod am33xx_aes0_hwmod = { }, }; -/* sha0 */ +/* sha0 HIB2 (the 'P' (public) device) */ +static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = { + .rev_offs = 0x100, + .sysc_offs = 0x110, + .syss_offs = 0x114, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + static struct omap_hwmod_class am33xx_sha0_hwmod_class = { .name = "sha0", + .sysc = &am33xx_sha0_sysc, }; static struct omap_hwmod_irq_info am33xx_sha0_irqs[] = { - { .irq = 108 + OMAP_INTC_START, }, + { .irq = 109 + OMAP_INTC_START, }, { .irq = -1 }, }; +static struct omap_hwmod_dma_info am33xx_sha0_edma_reqs[] = { + { .name = "rx", .dma_req = 36, }, + { .dma_req = -1 } +}; + static struct omap_hwmod am33xx_sha0_hwmod = { - .name = "sha0", + .name = "sham", .class = &am33xx_sha0_hwmod_class, .clkdm_name = "l3_clkdm", .mpu_irqs = am33xx_sha0_irqs, + .sdma_reqs = am33xx_sha0_edma_reqs, .main_clk = "l3_gclk", .prcm = { .omap4 = { @@ -551,8 +579,6 @@ static struct omap_hwmod am33xx_sha0_hwmod = { }, }; -#endif - /* ocmcram */ static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { .name = "ocmcram", @@ -3449,6 +3475,42 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l3 main -> sha0 HIB2 */ +static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = { + { + .pa_start = 0x53100000, + .pa_end = 0x53100000 + SZ_512 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_sha0_hwmod, + .clk = "sha0_fck", + .addr = am33xx_sha0_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3 main -> AES0 HIB2 */ +static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = { + { + .pa_start = 0x53500000, + .pa_end = 0x53500000 + SZ_1M - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_aes0_hwmod, + .clk = "aes0_fck", + .addr = am33xx_aes0_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_fw__emif_fw, &am33xx_l3_main__emif, @@ -3529,6 +3591,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_s__usbss, &am33xx_l4_hs__cpgmac0, &am33xx_cpgmac0__mdio, + &am33xx_l3_main__sha0, + &am33xx_l3_main__aes0, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ac7e03ec952f..4083606ea1da 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { * Erratum ID: i479 idle_req / idle_ack mechanism potentially * broken when autoidle is enabled * workaround is to disable the autoidle bit at module level. + * + * Enabling the device in any other MIDLEMODE setting but force-idle + * causes core_pwrdm not enter idle states at least on OMAP3630. + * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY + * signal when MIDLEMODE is set to force-idle. */ .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE - | HWMOD_SWSUP_MSTANDBY, + | HWMOD_FORCE_MSTANDBY, }; /* usb_otg_hs */ @@ -3545,6 +3550,132 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_core -> SHAM2 (SHA1/MD5) (similar to omap24xx) */ +static struct omap_hwmod_sysc_fields omap3_sham_sysc_fields = { + .sidle_shift = 4, + .srst_shift = 1, + .autoidle_shift = 0, +}; + +static struct omap_hwmod_class_sysconfig omap3_sham_sysc = { + .rev_offs = 0x5c, + .sysc_offs = 0x60, + .syss_offs = 0x64, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap3_sham_sysc_fields, +}; + +static struct omap_hwmod_class omap3xxx_sham_class = { + .name = "sham", + .sysc = &omap3_sham_sysc, +}; + +static struct omap_hwmod_irq_info omap3_sham_mpu_irqs[] = { + { .irq = 49 + OMAP_INTC_START, }, + { .irq = -1 } +}; + +static struct omap_hwmod_dma_info omap3_sham_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP34XX_DMA_SHA1MD5_RX, }, + { .dma_req = -1 } +}; + +static struct omap_hwmod omap3xxx_sham_hwmod = { + .name = "sham", + .mpu_irqs = omap3_sham_mpu_irqs, + .sdma_reqs = omap3_sham_sdma_reqs, + .main_clk = "sha12_ick", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_SHA12_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_SHA12_SHIFT, + }, + }, + .class = &omap3xxx_sham_class, +}; + +static struct omap_hwmod_addr_space omap3xxx_sham_addrs[] = { + { + .pa_start = 0x480c3000, + .pa_end = 0x480c3000 + 0x64 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_sham_hwmod, + .clk = "sha12_ick", + .addr = omap3xxx_sham_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> AES */ +static struct omap_hwmod_sysc_fields omap3xxx_aes_sysc_fields = { + .sidle_shift = 6, + .srst_shift = 1, + .autoidle_shift = 0, +}; + +static struct omap_hwmod_class_sysconfig omap3_aes_sysc = { + .rev_offs = 0x44, + .sysc_offs = 0x48, + .syss_offs = 0x4c, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap3xxx_aes_sysc_fields, +}; + +static struct omap_hwmod_class omap3xxx_aes_class = { + .name = "aes", + .sysc = &omap3_aes_sysc, +}; + +static struct omap_hwmod_dma_info omap3_aes_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP34XX_DMA_AES2_TX, }, + { .name = "rx", .dma_req = OMAP34XX_DMA_AES2_RX, }, + { .dma_req = -1 } +}; + +static struct omap_hwmod omap3xxx_aes_hwmod = { + .name = "aes", + .sdma_reqs = omap3_aes_sdma_reqs, + .main_clk = "aes2_ick", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_AES2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_AES2_SHIFT, + }, + }, + .class = &omap3xxx_aes_class, +}; + +static struct omap_hwmod_addr_space omap3xxx_aes_addrs[] = { + { + .pa_start = 0x480c5000, + .pa_end = 0x480c5000 + 0x50 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_aes_hwmod, + .clk = "aes2_ick", + .addr = omap3xxx_aes_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3596,8 +3727,32 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { }; /* GP-only hwmod links */ -static struct omap_hwmod_ocp_if *omap3xxx_gp_hwmod_ocp_ifs[] __initdata = { +static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, + &omap3xxx_l4_core__sham, + &omap3xxx_l4_core__aes, + NULL +}; + +static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_sec__timer12, + &omap3xxx_l4_core__sham, + &omap3xxx_l4_core__aes, + NULL +}; + +static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_sec__timer12, + /* + * Apparently the SHA/MD5 and AES accelerator IP blocks are + * only present on some AM35xx chips, and no one knows which + * ones. See + * http://www.spinics.net/lists/arm-kernel/msg215466.html So + * if you need these IP blocks on an AM35xx, try uncommenting + * the following lines. + */ + /* &omap3xxx_l4_core__sham, */ + /* &omap3xxx_l4_core__aes, */ NULL }; @@ -3704,7 +3859,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = { int __init omap3xxx_hwmod_init(void) { int r; - struct omap_hwmod_ocp_if **h = NULL; + struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL; unsigned int rev; omap_hwmod_init(); @@ -3714,13 +3869,6 @@ int __init omap3xxx_hwmod_init(void) if (r < 0) return r; - /* Register GP-only hwmod links. */ - if (omap_type() == OMAP2_DEVICE_TYPE_GP) { - r = omap_hwmod_register_links(omap3xxx_gp_hwmod_ocp_ifs); - if (r < 0) - return r; - } - rev = omap_rev(); /* @@ -3732,11 +3880,14 @@ int __init omap3xxx_hwmod_init(void) rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap34xx_hwmod_ocp_ifs; + h_gp = omap34xx_gp_hwmod_ocp_ifs; } else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { h = am35xx_hwmod_ocp_ifs; + h_gp = am35xx_gp_hwmod_ocp_ifs; } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) { h = omap36xx_hwmod_ocp_ifs; + h_gp = omap36xx_gp_hwmod_ocp_ifs; } else { WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); return -EINVAL; @@ -3746,6 +3897,14 @@ int __init omap3xxx_hwmod_init(void) if (r < 0) return r; + /* Register GP-only hwmod links. */ + if (h_gp && omap_type() == OMAP2_DEVICE_TYPE_GP) { + r = omap_hwmod_register_links(h_gp); + if (r < 0) + return r; + } + + /* * Register hwmod links specific to certain ES levels of a * particular family of silicon (e.g., 34xx ES1.0) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 0e47d2e1687c..eaba9dc91a0d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2719,7 +2719,17 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", .class = &omap44xx_ocp2scp_hwmod_class, .clkdm_name = "l3_init_clkdm", - .main_clk = "func_48m_fclk", + /* + * ocp2scp_usb_phy_phy_48m is provided by the OMAP4 PRCM IP + * block as an "optional clock," and normally should never be + * specified as the main_clk for an OMAP IP block. However it + * turns out that this clock is actually the main clock for + * the ocp2scp_usb_phy IP block: + * http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/119943.html + * So listing ocp2scp_usb_phy_phy_48m as a main_clk here seems + * to be the best workaround. + */ + .main_clk = "ocp2scp_usb_phy_phy_48m", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET, diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index cfcce299177c..6e04ff7065e1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -78,6 +78,8 @@ extern struct omap_hwmod omap2xxx_mcspi2_hwmod; extern struct omap_hwmod omap2xxx_counter_32k_hwmod; extern struct omap_hwmod omap2xxx_gpmc_hwmod; extern struct omap_hwmod omap2xxx_rng_hwmod; +extern struct omap_hwmod omap2xxx_sham_hwmod; +extern struct omap_hwmod omap2xxx_aes_hwmod; /* Common interface data across OMAP2xxx */ extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core; @@ -105,6 +107,8 @@ extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc; extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi; extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc; extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__sham; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__aes; /* Common IP block data */ extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[]; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 673a4c1d1d76..e742118fcfd2 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -218,7 +218,7 @@ static int omap_pm_enter(suspend_state_t suspend_state) static int omap_pm_begin(suspend_state_t state) { - disable_hlt(); + cpu_idle_poll_ctrl(true); if (cpu_is_omap34xx()) omap_prcm_irq_prepare(); return 0; @@ -226,8 +226,7 @@ static int omap_pm_begin(suspend_state_t state) static void omap_pm_end(void) { - enable_hlt(); - return; + cpu_idle_poll_ctrl(false); } static void omap_pm_finish(void) @@ -265,6 +264,12 @@ static void __init omap4_init_voltages(void) omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); } +static inline void omap_init_cpufreq(void) +{ + struct platform_device_info devinfo = { .name = "omap-cpufreq", }; + platform_device_register_full(&devinfo); +} + static int __init omap2_common_pm_init(void) { if (!of_have_populated_dt()) @@ -294,6 +299,9 @@ int __init omap2_common_pm_late_init(void) /* Smartreflex device init */ omap_devinit_smartreflex(); + + /* cpufreq dummy device instantiation */ + omap_init_cpufreq(); } #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b59d93908341..ce956b0a7ba4 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -200,22 +200,17 @@ static int omap2_can_sleep(void) static void omap2_pm_idle(void) { - local_fiq_disable(); - if (!omap2_can_sleep()) { if (omap_irq_pending()) - goto out; + return; omap2_enter_mpu_retention(); - goto out; + return; } if (omap_irq_pending()) - goto out; + return; omap2_enter_full_retention(); - -out: - local_fiq_enable(); } static void __init prcm_setup_regs(void) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2d93d8b23835..c01859398b54 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -346,19 +346,14 @@ void omap_sram_idle(void) static void omap3_pm_idle(void) { - local_fiq_disable(); - if (omap_irq_pending()) - goto out; + return; trace_cpu_idle(1, smp_processor_id()); omap_sram_idle(); trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); - -out: - local_fiq_enable(); } #ifdef CONFIG_SUSPEND @@ -757,14 +752,12 @@ int __init omap3_pm_init(void) pr_err("Memory allocation failed when allocating for secure sram context\n"); local_irq_disable(); - local_fiq_disable(); omap_dma_global_context_save(); omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); - local_fiq_enable(); } omap3_save_scratchpad_contents(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index ea62e75ef21d..a251f87fa2a2 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -126,16 +126,12 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) * omap_default_idle - OMAP4 default ilde routine.' * * Implements OMAP4 memory, IO ordering requirements which can't be addressed - * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and - * by secondary CPU with CONFIG_CPUIDLE. + * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPU_IDLE and + * by secondary CPU with CONFIG_CPU_IDLE. */ static void omap_default_idle(void) { - local_fiq_disable(); - omap_do_wfi(); - - local_fiq_enable(); } /** @@ -147,8 +143,8 @@ static void omap_default_idle(void) int __init omap4_pm_init(void) { int ret; - struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; - struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; + struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; + struct clockdomain *ducati_clkdm, *l3_2_clkdm; if (omap_rev() == OMAP4430_REV_ES1_0) { WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); @@ -175,27 +171,19 @@ int __init omap4_pm_init(void) * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as * expected. The hardware recommendation is to enable static * dependencies for these to avoid system lock ups or random crashes. - * The L4 wakeup depedency is added to workaround the OCP sync hardware - * BUG with 32K synctimer which lead to incorrect timer value read - * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which - * are part of L4 wakeup clockdomain. */ mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); emif_clkdm = clkdm_lookup("l3_emif_clkdm"); l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); - l4_per_clkdm = clkdm_lookup("l4_per_clkdm"); - l4wkup = clkdm_lookup("l4_wkup_clkdm"); ducati_clkdm = clkdm_lookup("ducati_clkdm"); - if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) || - (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm)) + if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || + (!l3_2_clkdm) || (!ducati_clkdm)) goto err2; ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); - ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm); - ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup); ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 35a8014529ca..94fbb815680c 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/cpu.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/orion5x.h> @@ -52,7 +53,7 @@ static void __init orion5x_dt_init(void) */ if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); - disable_hlt(); + cpu_idle_poll_ctrl(true); } if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index d068f1431c40..2075bf8e3d90 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -19,6 +19,7 @@ #include <linux/ata_platform.h> #include <linux/delay.h> #include <linux/clk-provider.h> +#include <linux/cpu.h> #include <net/dsa.h> #include <asm/page.h> #include <asm/setup.h> @@ -293,7 +294,7 @@ void __init orion5x_init(void) */ if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); - disable_hlt(); + cpu_idle_poll_ctrl(true); } /* diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index d9c7c3bf0d9c..973db98a3c27 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -402,8 +402,9 @@ static void __init orion5x_pci_master_slave_enable(void) orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7); } -static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) +static void __init orion5x_setup_pci_wins(void) { + const struct mbus_dram_target_info *dram = mv_mbus_dram_info(); u32 win_enable; int bus; int i; @@ -420,7 +421,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) bus = orion5x_pci_local_bus_nr(); for (i = 0; i < dram->num_cs; i++) { - struct mbus_dram_window *cs = dram->cs + i; + const struct mbus_dram_window *cs = dram->cs + i; u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index); u32 reg; u32 val; @@ -467,7 +468,7 @@ static int __init pci_setup(struct pci_sys_data *sys) /* * Point PCI unit MBUS decode windows to DRAM space. */ - orion5x_setup_pci_wins(&orion_mbus_dram_info); + orion5x_setup_pci_wins(); /* * Master + Slave enable diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 4f7379fe01e2..80ca974b2f82 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,6 +1,26 @@ +config ARCH_SIRF + bool "CSR SiRF" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select MIGHT_HAVE_CACHE_L2X0 + select NO_IOPORT + select PINCTRL + select PINCTRL_SIRF + help + Support for CSR SiRFprimaII/Marco/Polo platforms + if ARCH_SIRF -menu "CSR SiRF primaII/Marco/Polo Specific Features" +menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" + +config ARCH_ATLAS6 + bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" + default y + select CPU_V7 + select SIRF_IRQ + help + Support for CSR SiRFSoC ARM Cortex A9 Platform config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" @@ -16,6 +36,7 @@ config ARCH_MARCO default y select ARM_GIC select CPU_V7 + select HAVE_ARM_SCU if SMP select HAVE_SMP select SMP_ON_UP help diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index bfe360cbd177..7a6b4a323125 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -4,8 +4,7 @@ obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_CACHE_L2X0) += l2x0.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o -obj-$(CONFIG_SIRF_IRQ) += irq.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o -obj-$(CONFIG_ARCH_MARCO) += timer-marco.o + +CFLAGS_hotplug.o += -march=armv7-a diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index 2d57aa479a7b..4f94cd87972a 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -6,6 +6,7 @@ * Licensed under GPLv2 or later. */ +#include <linux/clocksource.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/irqchip.h> @@ -31,12 +32,38 @@ void __init sirfsoc_init_late(void) sirfsoc_pm_init(); } +static __init void sirfsoc_init_time(void) +{ + /* initialize clocking early, we want to set the OS timer */ + sirfsoc_of_clk_init(); + clocksource_of_init(); +} + static __init void sirfsoc_map_io(void) { sirfsoc_map_lluart(); sirfsoc_map_scu(); } +#ifdef CONFIG_ARCH_ATLAS6 +static const char *atlas6_dt_match[] __initdata = { + "sirf,atlas6", + NULL +}; + +DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") + /* Maintainer: Barry Song <baohua.song@csr.com> */ + .nr_irqs = 128, + .map_io = sirfsoc_map_io, + .init_irq = irqchip_init, + .init_time = sirfsoc_init_time, + .init_machine = sirfsoc_mach_init, + .init_late = sirfsoc_init_late, + .dt_compat = atlas6_dt_match, + .restart = sirfsoc_restart, +MACHINE_END +#endif + #ifdef CONFIG_ARCH_PRIMA2 static const char *prima2_dt_match[] __initdata = { "sirf,prima2", @@ -45,12 +72,10 @@ static const char *prima2_dt_match[] __initdata = { DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .nr_irqs = 128, .map_io = sirfsoc_map_io, - .init_irq = sirfsoc_of_irq_init, - .init_time = sirfsoc_prima2_timer_init, -#ifdef CONFIG_MULTI_IRQ_HANDLER - .handle_irq = sirfsoc_handle_irq, -#endif + .init_irq = irqchip_init, + .init_time = sirfsoc_init_time, .dma_zone_size = SZ_256M, .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, @@ -70,7 +95,7 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") .smp = smp_ops(sirfsoc_smp_ops), .map_io = sirfsoc_map_io, .init_irq = irqchip_init, - .init_time = sirfsoc_marco_timer_init, + .init_time = sirfsoc_init_time, .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, .dt_compat = marco_dt_match, diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index b7c26b62e4a7..81135cd88e54 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -13,8 +13,8 @@ #include <asm/mach/time.h> #include <asm/exception.h> -extern void sirfsoc_prima2_timer_init(void); -extern void sirfsoc_marco_timer_init(void); +#define SIRFSOC_VA_BASE _AC(0xFEC00000, UL) +#define SIRFSOC_VA(x) (SIRFSOC_VA_BASE + ((x) & 0x00FFF000)) extern struct smp_operations sirfsoc_smp_ops; extern void sirfsoc_secondary_startup(void); diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c index f4b17cbababd..0ab2f8bae28e 100644 --- a/arch/arm/mach-prima2/hotplug.c +++ b/arch/arm/mach-prima2/hotplug.c @@ -10,13 +10,10 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> static inline void platform_do_lowpower(unsigned int cpu) { - flush_cache_all(); - /* we put the platform to just WFI */ for (;;) { __asm__ __volatile__("dsb\n\t" "wfi\n\t" diff --git a/arch/arm/mach-prima2/include/mach/clkdev.h b/arch/arm/mach-prima2/include/mach/clkdev.h deleted file mode 100644 index 66932518b1b7..000000000000 --- a/arch/arm/mach-prima2/include/mach/clkdev.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/clkdev.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S deleted file mode 100644 index cd97492bb075..000000000000 --- a/arch/arm/mach-prima2/include/mach/debug-macro.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/debug-macro.S - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <mach/hardware.h> -#include <mach/uart.h> - - .macro addruart, rp, rv, tmp - ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical - ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA] - .endm - - .macro busyuart,rd,rx - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS] - tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY - beq 1001b - .endm - diff --git a/arch/arm/mach-prima2/include/mach/entry-macro.S b/arch/arm/mach-prima2/include/mach/entry-macro.S deleted file mode 100644 index 86434e7a5be9..000000000000 --- a/arch/arm/mach-prima2/include/mach/entry-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/entry-macro.S - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <mach/hardware.h> - -#define SIRFSOC_INT_ID 0x38 - - .macro get_irqnr_preamble, base, tmp - ldr \base, =sirfsoc_intc_base - ldr \base, [\base] - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #SIRFSOC_INT_ID] @ Get the highest priority irq - cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f - movges \irqnr, #0 - .endm diff --git a/arch/arm/mach-prima2/include/mach/hardware.h b/arch/arm/mach-prima2/include/mach/hardware.h deleted file mode 100644 index 105b96964f25..000000000000 --- a/arch/arm/mach-prima2/include/mach/hardware.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/hardware.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_HARDWARE_H__ -#define __MACH_HARDWARE_H__ - -#include <asm/sizes.h> -#include <mach/map.h> - -#endif diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h deleted file mode 100644 index b778a0f248ed..000000000000 --- a/arch/arm/mach-prima2/include/mach/irqs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/irqs.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define SIRFSOC_INTENAL_IRQ_START 0 -#define SIRFSOC_INTENAL_IRQ_END 127 -#define SIRFSOC_GPIO_IRQ_START (SIRFSOC_INTENAL_IRQ_END + 1) -#define NR_IRQS 288 - -#endif diff --git a/arch/arm/mach-prima2/include/mach/map.h b/arch/arm/mach-prima2/include/mach/map.h deleted file mode 100644 index 6f243532570c..000000000000 --- a/arch/arm/mach-prima2/include/mach/map.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * memory & I/O static mapping definitions for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_PRIMA2_MAP_H__ -#define __MACH_PRIMA2_MAP_H__ - -#include <linux/const.h> - -#define SIRFSOC_VA_BASE _AC(0xFEC00000, UL) - -#define SIRFSOC_VA(x) (SIRFSOC_VA_BASE + ((x) & 0x00FFF000)) - -#endif diff --git a/arch/arm/mach-prima2/include/mach/timex.h b/arch/arm/mach-prima2/include/mach/timex.h deleted file mode 100644 index d6f98a75e562..000000000000 --- a/arch/arm/mach-prima2/include/mach/timex.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/timex.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_TIMEX_H__ -#define __MACH_TIMEX_H__ - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h deleted file mode 100644 index d1513a33709a..000000000000 --- a/arch/arm/mach-prima2/include/mach/uncompress.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/uncompress.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/uart.h> - -void arch_decomp_setup(void) -{ -} - -static __inline__ void putc(char c) -{ - /* - * during kernel decompression, all mappings are flat: - * virt_addr == phys_addr - */ - if (!SIRFSOC_UART1_PA_BASE) - return; - - while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS) - & SIRFSOC_UART1_TXFIFO_FULL) - barrier(); - - __raw_writel(c, (void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA); -} - -static inline void flush(void) -{ -} - -#endif - diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c deleted file mode 100644 index 6c0f3e9c43fb..000000000000 --- a/arch/arm/mach-prima2/irq.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * interrupt controller support for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/irqdomain.h> -#include <linux/syscore_ops.h> -#include <asm/mach/irq.h> -#include <asm/exception.h> -#include <mach/hardware.h> - -#define SIRFSOC_INT_RISC_MASK0 0x0018 -#define SIRFSOC_INT_RISC_MASK1 0x001C -#define SIRFSOC_INT_RISC_LEVEL0 0x0020 -#define SIRFSOC_INT_RISC_LEVEL1 0x0024 -#define SIRFSOC_INIT_IRQ_ID 0x0038 - -void __iomem *sirfsoc_intc_base; - -static __init void -sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("SIRFINTC", 1, irq_start, base, handle_level_irq); - ct = gc->chip_types; - - ct->chip.irq_mask = irq_gc_mask_clr_bit; - ct->chip.irq_unmask = irq_gc_mask_set_bit; - ct->regs.mask = SIRFSOC_INT_RISC_MASK0; - - irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0); -} - -static __init void sirfsoc_irq_init(void) -{ - sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32); - sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, - SIRFSOC_INTENAL_IRQ_END + 1 - 32); - - writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); - writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); - - writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); - writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); -} - -asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs) -{ - u32 irqstat, irqnr; - - irqstat = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INIT_IRQ_ID); - irqnr = irqstat & 0xff; - - handle_IRQ(irqnr, regs); -} - -static struct of_device_id intc_ids[] = { - { .compatible = "sirf,prima2-intc" }, - {}, -}; - -void __init sirfsoc_of_irq_init(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, intc_ids); - if (!np) - return; - - sirfsoc_intc_base = of_iomap(np, 0); - if (!sirfsoc_intc_base) - panic("unable to map intc cpu registers\n"); - - irq_domain_add_legacy(np, SIRFSOC_INTENAL_IRQ_END + 1, 0, 0, - &irq_domain_simple_ops, NULL); - - of_node_put(np); - - sirfsoc_irq_init(); -} - -struct sirfsoc_irq_status { - u32 mask0; - u32 mask1; - u32 level0; - u32 level1; -}; - -static struct sirfsoc_irq_status sirfsoc_irq_st; - -static int sirfsoc_irq_suspend(void) -{ - sirfsoc_irq_st.mask0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); - sirfsoc_irq_st.mask1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); - sirfsoc_irq_st.level0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); - sirfsoc_irq_st.level1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); - - return 0; -} - -static void sirfsoc_irq_resume(void) -{ - writel_relaxed(sirfsoc_irq_st.mask0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); - writel_relaxed(sirfsoc_irq_st.mask1, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); - writel_relaxed(sirfsoc_irq_st.level0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); - writel_relaxed(sirfsoc_irq_st.level1, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); -} - -static struct syscore_ops sirfsoc_irq_syscore_ops = { - .suspend = sirfsoc_irq_suspend, - .resume = sirfsoc_irq_resume, -}; - -static int __init sirfsoc_irq_pm_init(void) -{ - register_syscore_ops(&sirfsoc_irq_syscore_ops); - return 0; -} -device_initcall(sirfsoc_irq_pm_init); diff --git a/arch/arm/mach-prima2/lluart.c b/arch/arm/mach-prima2/lluart.c index a89f9b3c8cc5..99c0c927ca4a 100644 --- a/arch/arm/mach-prima2/lluart.c +++ b/arch/arm/mach-prima2/lluart.c @@ -9,8 +9,18 @@ #include <linux/kernel.h> #include <asm/page.h> #include <asm/mach/map.h> -#include <mach/map.h> -#include <mach/uart.h> +#include "common.h" + +#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1) +#define SIRFSOC_UART1_PA_BASE 0xb0060000 +#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1) +#define SIRFSOC_UART1_PA_BASE 0xcc060000 +#else +#define SIRFSOC_UART1_PA_BASE 0 +#endif + +#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000) +#define SIRFSOC_UART1_SIZE SZ_4K void __init sirfsoc_map_lluart(void) { diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 4b788310f6a6..1c3de7bed841 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -11,14 +11,12 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/mach/map.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/cacheflush.h> #include <asm/cputype.h> -#include <mach/map.h> #include "common.h" @@ -49,13 +47,6 @@ void __init sirfsoc_map_scu(void) static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-prima2/timer-marco.c b/arch/arm/mach-prima2/timer-marco.c deleted file mode 100644 index f4eea2e97eb0..000000000000 --- a/arch/arm/mach-prima2/timer-marco.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * System timer for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/clocksource.h> -#include <linux/bitops.h> -#include <linux/irq.h> -#include <linux/clk.h> -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <linux/of_address.h> -#include <asm/sched_clock.h> -#include <asm/localtimer.h> -#include <asm/mach/time.h> - -#include "common.h" - -#define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000 -#define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004 -#define SIRFSOC_TIMER_MATCH_0 0x0018 -#define SIRFSOC_TIMER_MATCH_1 0x001c -#define SIRFSOC_TIMER_COUNTER_0 0x0048 -#define SIRFSOC_TIMER_COUNTER_1 0x004c -#define SIRFSOC_TIMER_INTR_STATUS 0x0060 -#define SIRFSOC_TIMER_WATCHDOG_EN 0x0064 -#define SIRFSOC_TIMER_64COUNTER_CTRL 0x0068 -#define SIRFSOC_TIMER_64COUNTER_LO 0x006c -#define SIRFSOC_TIMER_64COUNTER_HI 0x0070 -#define SIRFSOC_TIMER_64COUNTER_LOAD_LO 0x0074 -#define SIRFSOC_TIMER_64COUNTER_LOAD_HI 0x0078 -#define SIRFSOC_TIMER_64COUNTER_RLATCHED_LO 0x007c -#define SIRFSOC_TIMER_64COUNTER_RLATCHED_HI 0x0080 - -#define SIRFSOC_TIMER_REG_CNT 6 - -static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { - SIRFSOC_TIMER_WATCHDOG_EN, - SIRFSOC_TIMER_32COUNTER_0_CTRL, - SIRFSOC_TIMER_32COUNTER_1_CTRL, - SIRFSOC_TIMER_64COUNTER_CTRL, - SIRFSOC_TIMER_64COUNTER_RLATCHED_LO, - SIRFSOC_TIMER_64COUNTER_RLATCHED_HI, -}; - -static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT]; - -static void __iomem *sirfsoc_timer_base; -static void __init sirfsoc_of_timer_map(void); - -/* disable count and interrupt */ -static inline void sirfsoc_timer_count_disable(int idx) -{ - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) & ~0x7, - sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx); -} - -/* enable count and interrupt */ -static inline void sirfsoc_timer_count_enable(int idx) -{ - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x7, - sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx); -} - -/* timer interrupt handler */ -static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *ce = dev_id; - int cpu = smp_processor_id(); - - /* clear timer interrupt */ - writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - - if (ce->mode == CLOCK_EVT_MODE_ONESHOT) - sirfsoc_timer_count_disable(cpu); - - ce->event_handler(ce); - - return IRQ_HANDLED; -} - -/* read 64-bit timer counter */ -static cycle_t sirfsoc_timer_read(struct clocksource *cs) -{ - u64 cycles; - - writel_relaxed((readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | - BIT(0)) & ~BIT(1), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - - cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_HI); - cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_LO); - - return cycles; -} - -static int sirfsoc_timer_set_next_event(unsigned long delta, - struct clock_event_device *ce) -{ - int cpu = smp_processor_id(); - - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0 + - 4 * cpu); - writel_relaxed(delta, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0 + - 4 * cpu); - - /* enable the tick */ - sirfsoc_timer_count_enable(cpu); - - return 0; -} - -static void sirfsoc_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *ce) -{ - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - /* enable in set_next_event */ - break; - default: - break; - } - - sirfsoc_timer_count_disable(smp_processor_id()); -} - -static void sirfsoc_clocksource_suspend(struct clocksource *cs) -{ - int i; - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) - sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); -} - -static void sirfsoc_clocksource_resume(struct clocksource *cs) -{ - int i; - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) - writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], - sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO); - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], - sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI); - - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | - BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); -} - -static struct clock_event_device sirfsoc_clockevent = { - .name = "sirfsoc_clockevent", - .rating = 200, - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_mode = sirfsoc_timer_set_mode, - .set_next_event = sirfsoc_timer_set_next_event, -}; - -static struct clocksource sirfsoc_clocksource = { - .name = "sirfsoc_clocksource", - .rating = 200, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .read = sirfsoc_timer_read, - .suspend = sirfsoc_clocksource_suspend, - .resume = sirfsoc_clocksource_resume, -}; - -static struct irqaction sirfsoc_timer_irq = { - .name = "sirfsoc_timer0", - .flags = IRQF_TIMER | IRQF_NOBALANCING, - .handler = sirfsoc_timer_interrupt, - .dev_id = &sirfsoc_clockevent, -}; - -#ifdef CONFIG_LOCAL_TIMERS - -static struct irqaction sirfsoc_timer1_irq = { - .name = "sirfsoc_timer1", - .flags = IRQF_TIMER | IRQF_NOBALANCING, - .handler = sirfsoc_timer_interrupt, -}; - -static int __cpuinit sirfsoc_local_timer_setup(struct clock_event_device *ce) -{ - /* Use existing clock_event for cpu 0 */ - if (!smp_processor_id()) - return 0; - - ce->irq = sirfsoc_timer1_irq.irq; - ce->name = "local_timer"; - ce->features = sirfsoc_clockevent.features; - ce->rating = sirfsoc_clockevent.rating; - ce->set_mode = sirfsoc_timer_set_mode; - ce->set_next_event = sirfsoc_timer_set_next_event; - ce->shift = sirfsoc_clockevent.shift; - ce->mult = sirfsoc_clockevent.mult; - ce->max_delta_ns = sirfsoc_clockevent.max_delta_ns; - ce->min_delta_ns = sirfsoc_clockevent.min_delta_ns; - - sirfsoc_timer1_irq.dev_id = ce; - BUG_ON(setup_irq(ce->irq, &sirfsoc_timer1_irq)); - irq_set_affinity(sirfsoc_timer1_irq.irq, cpumask_of(1)); - - clockevents_register_device(ce); - return 0; -} - -static void sirfsoc_local_timer_stop(struct clock_event_device *ce) -{ - sirfsoc_timer_count_disable(1); - - remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq); -} - -static struct local_timer_ops sirfsoc_local_timer_ops __cpuinitdata = { - .setup = sirfsoc_local_timer_setup, - .stop = sirfsoc_local_timer_stop, -}; -#endif /* CONFIG_LOCAL_TIMERS */ - -static void __init sirfsoc_clockevent_init(void) -{ - clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60); - - sirfsoc_clockevent.max_delta_ns = - clockevent_delta2ns(-2, &sirfsoc_clockevent); - sirfsoc_clockevent.min_delta_ns = - clockevent_delta2ns(2, &sirfsoc_clockevent); - - sirfsoc_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&sirfsoc_clockevent); -#ifdef CONFIG_LOCAL_TIMERS - local_timer_register(&sirfsoc_local_timer_ops); -#endif -} - -/* initialize the kernel jiffy timer source */ -void __init sirfsoc_marco_timer_init(void) -{ - unsigned long rate; - u32 timer_div; - struct clk *clk; - - /* initialize clocking early, we want to set the OS timer */ - sirfsoc_of_clk_init(); - - /* timer's input clock is io clock */ - clk = clk_get_sys("io", NULL); - - BUG_ON(IS_ERR(clk)); - rate = clk_get_rate(clk); - - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); - - sirfsoc_of_timer_map(); - - /* Initialize the timer dividers */ - timer_div = rate / CLOCK_TICK_RATE - 1; - writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL); - writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL); - - /* Initialize timer counters to 0 */ - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI); - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | - BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_1); - - /* Clear all interrupts */ - writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); - - BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); - - sirfsoc_clockevent_init(); -} - -static struct of_device_id timer_ids[] = { - { .compatible = "sirf,marco-tick" }, - {}, -}; - -static void __init sirfsoc_of_timer_map(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, timer_ids); - if (!np) - return; - sirfsoc_timer_base = of_iomap(np, 0); - if (!sirfsoc_timer_base) - panic("unable to map timer cpu registers\n"); - - sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0); - if (!sirfsoc_timer_irq.irq) - panic("No irq passed for timer0 via DT\n"); - -#ifdef CONFIG_LOCAL_TIMERS - sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1); - if (!sirfsoc_timer1_irq.irq) - panic("No irq passed for timer1 via DT\n"); -#endif - - of_node_put(np); -} diff --git a/arch/arm/mach-prima2/timer-prima2.c b/arch/arm/mach-prima2/timer-prima2.c deleted file mode 100644 index 6da584f8a949..000000000000 --- a/arch/arm/mach-prima2/timer-prima2.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * System timer for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/clocksource.h> -#include <linux/bitops.h> -#include <linux/irq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <mach/map.h> -#include <asm/sched_clock.h> -#include <asm/mach/time.h> - -#include "common.h" - -#define SIRFSOC_TIMER_COUNTER_LO 0x0000 -#define SIRFSOC_TIMER_COUNTER_HI 0x0004 -#define SIRFSOC_TIMER_MATCH_0 0x0008 -#define SIRFSOC_TIMER_MATCH_1 0x000C -#define SIRFSOC_TIMER_MATCH_2 0x0010 -#define SIRFSOC_TIMER_MATCH_3 0x0014 -#define SIRFSOC_TIMER_MATCH_4 0x0018 -#define SIRFSOC_TIMER_MATCH_5 0x001C -#define SIRFSOC_TIMER_STATUS 0x0020 -#define SIRFSOC_TIMER_INT_EN 0x0024 -#define SIRFSOC_TIMER_WATCHDOG_EN 0x0028 -#define SIRFSOC_TIMER_DIV 0x002C -#define SIRFSOC_TIMER_LATCH 0x0030 -#define SIRFSOC_TIMER_LATCHED_LO 0x0034 -#define SIRFSOC_TIMER_LATCHED_HI 0x0038 - -#define SIRFSOC_TIMER_WDT_INDEX 5 - -#define SIRFSOC_TIMER_LATCH_BIT BIT(0) - -#define SIRFSOC_TIMER_REG_CNT 11 - -static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { - SIRFSOC_TIMER_MATCH_0, SIRFSOC_TIMER_MATCH_1, SIRFSOC_TIMER_MATCH_2, - SIRFSOC_TIMER_MATCH_3, SIRFSOC_TIMER_MATCH_4, SIRFSOC_TIMER_MATCH_5, - SIRFSOC_TIMER_INT_EN, SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_DIV, - SIRFSOC_TIMER_LATCHED_LO, SIRFSOC_TIMER_LATCHED_HI, -}; - -static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT]; - -static void __iomem *sirfsoc_timer_base; -static void __init sirfsoc_of_timer_map(void); - -/* timer0 interrupt handler */ -static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *ce = dev_id; - - WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & BIT(0))); - - /* clear timer0 interrupt */ - writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); - - ce->event_handler(ce); - - return IRQ_HANDLED; -} - -/* read 64-bit timer counter */ -static cycle_t sirfsoc_timer_read(struct clocksource *cs) -{ - u64 cycles; - - /* latch the 64-bit timer counter */ - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI); - cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); - - return cycles; -} - -static int sirfsoc_timer_set_next_event(unsigned long delta, - struct clock_event_device *ce) -{ - unsigned long now, next; - - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); - next = now + delta; - writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0); - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); - - return next - now > delta ? -ETIME : 0; -} - -static void sirfsoc_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *ce) -{ - u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - WARN_ON(1); - break; - case CLOCK_EVT_MODE_ONESHOT: - writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - writel_relaxed(val & ~BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static void sirfsoc_clocksource_suspend(struct clocksource *cs) -{ - int i; - - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) - sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); -} - -static void sirfsoc_clocksource_resume(struct clocksource *cs) -{ - int i; - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) - writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); -} - -static struct clock_event_device sirfsoc_clockevent = { - .name = "sirfsoc_clockevent", - .rating = 200, - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_mode = sirfsoc_timer_set_mode, - .set_next_event = sirfsoc_timer_set_next_event, -}; - -static struct clocksource sirfsoc_clocksource = { - .name = "sirfsoc_clocksource", - .rating = 200, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .read = sirfsoc_timer_read, - .suspend = sirfsoc_clocksource_suspend, - .resume = sirfsoc_clocksource_resume, -}; - -static struct irqaction sirfsoc_timer_irq = { - .name = "sirfsoc_timer0", - .flags = IRQF_TIMER, - .irq = 0, - .handler = sirfsoc_timer_interrupt, - .dev_id = &sirfsoc_clockevent, -}; - -/* Overwrite weak default sched_clock with more precise one */ -static u32 notrace sirfsoc_read_sched_clock(void) -{ - return (u32)(sirfsoc_timer_read(NULL) & 0xffffffff); -} - -static void __init sirfsoc_clockevent_init(void) -{ - sirfsoc_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE, - 2, -2); -} - -/* initialize the kernel jiffy timer source */ -void __init sirfsoc_prima2_timer_init(void) -{ - unsigned long rate; - struct clk *clk; - - /* initialize clocking early, we want to set the OS timer */ - sirfsoc_of_clk_init(); - - /* timer's input clock is io clock */ - clk = clk_get_sys("io", NULL); - - BUG_ON(IS_ERR(clk)); - - rate = clk_get_rate(clk); - - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); - - sirfsoc_of_timer_map(); - - writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); - writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); - - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); - - setup_sched_clock(sirfsoc_read_sched_clock, 32, CLOCK_TICK_RATE); - - BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); - - sirfsoc_clockevent_init(); -} - -static struct of_device_id timer_ids[] = { - { .compatible = "sirf,prima2-tick" }, - {}, -}; - -static void __init sirfsoc_of_timer_map(void) -{ - struct device_node *np; - const unsigned int *intspec; - - np = of_find_matching_node(NULL, timer_ids); - if (!np) - return; - sirfsoc_timer_base = of_iomap(np, 0); - if (!sirfsoc_timer_base) - panic("unable to map timer cpu registers\n"); - - /* Get the interrupts property */ - intspec = of_get_property(np, "interrupts", NULL); - BUG_ON(!intspec); - sirfsoc_timer_irq.irq = be32_to_cpup(intspec); - - of_node_put(np); -} diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 12c500558387..648867a8caa8 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -7,12 +7,6 @@ obj-y += clock.o devices.o generic.o irq.o \ time.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o -ifeq ($(CONFIG_CPU_FREQ),y) -obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o -obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o -obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o -endif - # Generic drivers that other drivers may depend upon # SoC-specific code diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c deleted file mode 100644 index 6a7aeab42f6c..000000000000 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ /dev/null @@ -1,494 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c - * - * Copyright (C) 2002,2003 Intrinsyc Software - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * History: - * 31-Jul-2002 : Initial version [FB] - * 29-Jan-2003 : added PXA255 support [FB] - * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.) - * - * Note: - * This driver may change the memory bus clock rate, but will not do any - * platform specific access timing changes... for example if you have flash - * memory connected to CS0, you will need to register a platform specific - * notifier which will adjust the memory access strobes to maintain a - * minimum strobe width. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/err.h> -#include <linux/regulator/consumer.h> -#include <linux/io.h> - -#include <mach/pxa2xx-regs.h> -#include <mach/smemc.h> - -#ifdef DEBUG -static unsigned int freq_debug; -module_param(freq_debug, uint, 0); -MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); -#else -#define freq_debug 0 -#endif - -static struct regulator *vcc_core; - -static unsigned int pxa27x_maxfreq; -module_param(pxa27x_maxfreq, uint, 0); -MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz" - "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)"); - -typedef struct { - unsigned int khz; - unsigned int membus; - unsigned int cccr; - unsigned int div2; - unsigned int cclkcfg; - int vmin; - int vmax; -} pxa_freqs_t; - -/* Define the refresh period in mSec for the SDRAM and the number of rows */ -#define SDRAM_TREF 64 /* standard 64ms SDRAM */ -static unsigned int sdram_rows; - -#define CCLKCFG_TURBO 0x1 -#define CCLKCFG_FCS 0x2 -#define CCLKCFG_HALFTURBO 0x4 -#define CCLKCFG_FASTBUS 0x8 -#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) -#define MDREFR_DRI_MASK 0xFFF - -#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3) -#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3) - -/* - * PXA255 definitions - */ -/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */ -#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS - -static pxa_freqs_t pxa255_run_freqs[] = -{ - /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ - {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */ - {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */ - {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */ - {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */ - {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */ -}; - -/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ -static pxa_freqs_t pxa255_turbo_freqs[] = -{ - /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ - {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */ - {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */ - {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */ - {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */ -}; - -#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) -#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) - -static struct cpufreq_frequency_table - pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1]; -static struct cpufreq_frequency_table - pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1]; - -static unsigned int pxa255_turbo_table; -module_param(pxa255_turbo_table, uint, 0); -MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)"); - -/* - * PXA270 definitions - * - * For the PXA27x: - * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG. - * - * A = 0 => memory controller clock from table 3-7, - * A = 1 => memory controller clock = system bus clock - * Run mode frequency = 13 MHz * L - * Turbo mode frequency = 13 MHz * L * N - * System bus frequency = 13 MHz * L / (B + 1) - * - * In CCCR: - * A = 1 - * L = 16 oscillator to run mode ratio - * 2N = 6 2 * (turbo mode to run mode ratio) - * - * In CCLKCFG: - * B = 1 Fast bus mode - * HT = 0 Half-Turbo mode - * T = 1 Turbo mode - * - * For now, just support some of the combinations in table 3-7 of - * PXA27x Processor Family Developer's Manual to simplify frequency - * change sequences. - */ -#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L) -#define CCLKCFG2(B, HT, T) \ - (CCLKCFG_FCS | \ - ((B) ? CCLKCFG_FASTBUS : 0) | \ - ((HT) ? CCLKCFG_HALFTURBO : 0) | \ - ((T) ? CCLKCFG_TURBO : 0)) - -static pxa_freqs_t pxa27x_freqs[] = { - {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 }, - {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 }, - {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 }, - {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 }, - {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 }, - {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 }, - {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 } -}; - -#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs) -static struct cpufreq_frequency_table - pxa27x_freq_table[NUM_PXA27x_FREQS+1]; - -extern unsigned get_clk_frequency_khz(int info); - -#ifdef CONFIG_REGULATOR - -static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) -{ - int ret = 0; - int vmin, vmax; - - if (!cpu_is_pxa27x()) - return 0; - - vmin = pxa_freq->vmin; - vmax = pxa_freq->vmax; - if ((vmin == -1) || (vmax == -1)) - return 0; - - ret = regulator_set_voltage(vcc_core, vmin, vmax); - if (ret) - pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n", - vmin, vmax); - return ret; -} - -static __init void pxa_cpufreq_init_voltages(void) -{ - vcc_core = regulator_get(NULL, "vcc_core"); - if (IS_ERR(vcc_core)) { - pr_info("cpufreq: Didn't find vcc_core regulator\n"); - vcc_core = NULL; - } else { - pr_info("cpufreq: Found vcc_core regulator\n"); - } -} -#else -static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) -{ - return 0; -} - -static __init void pxa_cpufreq_init_voltages(void) { } -#endif - -static void find_freq_tables(struct cpufreq_frequency_table **freq_table, - pxa_freqs_t **pxa_freqs) -{ - if (cpu_is_pxa25x()) { - if (!pxa255_turbo_table) { - *pxa_freqs = pxa255_run_freqs; - *freq_table = pxa255_run_freq_table; - } else { - *pxa_freqs = pxa255_turbo_freqs; - *freq_table = pxa255_turbo_freq_table; - } - } - if (cpu_is_pxa27x()) { - *pxa_freqs = pxa27x_freqs; - *freq_table = pxa27x_freq_table; - } -} - -static void pxa27x_guess_max_freq(void) -{ - if (!pxa27x_maxfreq) { - pxa27x_maxfreq = 416000; - printk(KERN_INFO "PXA CPU 27x max frequency not defined " - "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", - pxa27x_maxfreq); - } else { - pxa27x_maxfreq *= 1000; - } -} - -static void init_sdram_rows(void) -{ - uint32_t mdcnfg = __raw_readl(MDCNFG); - unsigned int drac2 = 0, drac0 = 0; - - if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3)) - drac2 = MDCNFG_DRAC2(mdcnfg); - - if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1)) - drac0 = MDCNFG_DRAC0(mdcnfg); - - sdram_rows = 1 << (11 + max(drac0, drac2)); -} - -static u32 mdrefr_dri(unsigned int freq) -{ - u32 interval = freq * SDRAM_TREF / sdram_rows; - - return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32; -} - -/* find a valid frequency point */ -static int pxa_verify_policy(struct cpufreq_policy *policy) -{ - struct cpufreq_frequency_table *pxa_freqs_table; - pxa_freqs_t *pxa_freqs; - int ret; - - find_freq_tables(&pxa_freqs_table, &pxa_freqs); - ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table); - - if (freq_debug) - pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n", - policy->min, policy->max); - - return ret; -} - -static unsigned int pxa_cpufreq_get(unsigned int cpu) -{ - return get_clk_frequency_khz(0); -} - -static int pxa_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_frequency_table *pxa_freqs_table; - pxa_freqs_t *pxa_freq_settings; - struct cpufreq_freqs freqs; - unsigned int idx; - unsigned long flags; - unsigned int new_freq_cpu, new_freq_mem; - unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg; - int ret = 0; - - /* Get the current policy */ - find_freq_tables(&pxa_freqs_table, &pxa_freq_settings); - - /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, pxa_freqs_table, - target_freq, relation, &idx)) { - return -EINVAL; - } - - new_freq_cpu = pxa_freq_settings[idx].khz; - new_freq_mem = pxa_freq_settings[idx].membus; - freqs.old = policy->cur; - freqs.new = new_freq_cpu; - freqs.cpu = policy->cpu; - - if (freq_debug) - pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n", - freqs.new / 1000, (pxa_freq_settings[idx].div2) ? - (new_freq_mem / 2000) : (new_freq_mem / 1000)); - - if (vcc_core && freqs.new > freqs.old) - ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); - if (ret) - return ret; - /* - * Tell everyone what we're about to do... - * you should add a notify client with any platform specific - * Vcc changing capability - */ - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Calculate the next MDREFR. If we're slowing down the SDRAM clock - * we need to preset the smaller DRI before the change. If we're - * speeding up we need to set the larger DRI value after the change. - */ - preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR); - if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) { - preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK); - preset_mdrefr |= mdrefr_dri(new_freq_mem); - } - postset_mdrefr = - (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem); - - /* If we're dividing the memory clock by two for the SDRAM clock, this - * must be set prior to the change. Clearing the divide must be done - * after the change. - */ - if (pxa_freq_settings[idx].div2) { - preset_mdrefr |= MDREFR_DB2_MASK; - postset_mdrefr |= MDREFR_DB2_MASK; - } else { - postset_mdrefr &= ~MDREFR_DB2_MASK; - } - - local_irq_save(flags); - - /* Set new the CCCR and prepare CCLKCFG */ - CCCR = pxa_freq_settings[idx].cccr; - cclkcfg = pxa_freq_settings[idx].cclkcfg; - - asm volatile(" \n\ - ldr r4, [%1] /* load MDREFR */ \n\ - b 2f \n\ - .align 5 \n\ -1: \n\ - str %3, [%1] /* preset the MDREFR */ \n\ - mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\ - str %4, [%1] /* postset the MDREFR */ \n\ - \n\ - b 3f \n\ -2: b 1b \n\ -3: nop \n\ - " - : "=&r" (unused) - : "r" (MDREFR), "r" (cclkcfg), - "r" (preset_mdrefr), "r" (postset_mdrefr) - : "r4", "r5"); - local_irq_restore(flags); - - /* - * Tell everyone what we've just done... - * you should add a notify client with any platform specific - * SDRAM refresh timer adjustments - */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - /* - * Even if voltage setting fails, we don't report it, as the frequency - * change succeeded. The voltage reduction is not a critical failure, - * only power savings will suffer from this. - * - * Note: if the voltage change fails, and a return value is returned, a - * bug is triggered (seems a deadlock). Should anybody find out where, - * the "return 0" should become a "return ret". - */ - if (vcc_core && freqs.new < freqs.old) - ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); - - return 0; -} - -static int pxa_cpufreq_init(struct cpufreq_policy *policy) -{ - int i; - unsigned int freq; - struct cpufreq_frequency_table *pxa255_freq_table; - pxa_freqs_t *pxa255_freqs; - - /* try to guess pxa27x cpu */ - if (cpu_is_pxa27x()) - pxa27x_guess_max_freq(); - - pxa_cpufreq_init_voltages(); - - init_sdram_rows(); - - /* set default policy and cpuinfo */ - policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->cur = get_clk_frequency_khz(0); /* current freq */ - policy->min = policy->max = policy->cur; - - /* Generate pxa25x the run cpufreq_frequency_table struct */ - for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { - pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; - pxa255_run_freq_table[i].index = i; - } - pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; - - /* Generate pxa25x the turbo cpufreq_frequency_table struct */ - for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { - pxa255_turbo_freq_table[i].frequency = - pxa255_turbo_freqs[i].khz; - pxa255_turbo_freq_table[i].index = i; - } - pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; - - pxa255_turbo_table = !!pxa255_turbo_table; - - /* Generate the pxa27x cpufreq_frequency_table struct */ - for (i = 0; i < NUM_PXA27x_FREQS; i++) { - freq = pxa27x_freqs[i].khz; - if (freq > pxa27x_maxfreq) - break; - pxa27x_freq_table[i].frequency = freq; - pxa27x_freq_table[i].index = i; - } - pxa27x_freq_table[i].index = i; - pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; - - /* - * Set the policy's minimum and maximum frequencies from the tables - * just constructed. This sets cpuinfo.mxx_freq, min and max. - */ - if (cpu_is_pxa25x()) { - find_freq_tables(&pxa255_freq_table, &pxa255_freqs); - pr_info("PXA255 cpufreq using %s frequency table\n", - pxa255_turbo_table ? "turbo" : "run"); - cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table); - } - else if (cpu_is_pxa27x()) - cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table); - - printk(KERN_INFO "PXA CPU frequency change support initialized\n"); - - return 0; -} - -static struct cpufreq_driver pxa_cpufreq_driver = { - .verify = pxa_verify_policy, - .target = pxa_set_target, - .init = pxa_cpufreq_init, - .get = pxa_cpufreq_get, - .name = "PXA2xx", -}; - -static int __init pxa_cpu_init(void) -{ - int ret = -ENODEV; - if (cpu_is_pxa25x() || cpu_is_pxa27x()) - ret = cpufreq_register_driver(&pxa_cpufreq_driver); - return ret; -} - -static void __exit pxa_cpu_exit(void) -{ - cpufreq_unregister_driver(&pxa_cpufreq_driver); -} - - -MODULE_AUTHOR("Intrinsyc Software Inc."); -MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture"); -MODULE_LICENSE("GPL"); -module_init(pxa_cpu_init); -module_exit(pxa_cpu_exit); diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c deleted file mode 100644 index b85b4ab7aac6..000000000000 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c - * - * Copyright (C) 2008 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/io.h> - -#include <mach/pxa3xx-regs.h> - -#include "generic.h" - -#define HSS_104M (0) -#define HSS_156M (1) -#define HSS_208M (2) -#define HSS_312M (3) - -#define SMCFS_78M (0) -#define SMCFS_104M (2) -#define SMCFS_208M (5) - -#define SFLFS_104M (0) -#define SFLFS_156M (1) -#define SFLFS_208M (2) -#define SFLFS_312M (3) - -#define XSPCLK_156M (0) -#define XSPCLK_NONE (3) - -#define DMCFS_26M (0) -#define DMCFS_260M (3) - -struct pxa3xx_freq_info { - unsigned int cpufreq_mhz; - unsigned int core_xl : 5; - unsigned int core_xn : 3; - unsigned int hss : 2; - unsigned int dmcfs : 2; - unsigned int smcfs : 3; - unsigned int sflfs : 2; - unsigned int df_clkdiv : 3; - - int vcc_core; /* in mV */ - int vcc_sram; /* in mV */ -}; - -#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \ -{ \ - .cpufreq_mhz = cpufreq, \ - .core_xl = _xl, \ - .core_xn = _xn, \ - .hss = HSS_##_hss##M, \ - .dmcfs = DMCFS_##_dmc##M, \ - .smcfs = SMCFS_##_smc##M, \ - .sflfs = SFLFS_##_sfl##M, \ - .df_clkdiv = _dfi, \ - .vcc_core = vcore, \ - .vcc_sram = vsram, \ -} - -static struct pxa3xx_freq_info pxa300_freqs[] = { - /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ - OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ - OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ - OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ - OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ -}; - -static struct pxa3xx_freq_info pxa320_freqs[] = { - /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ - OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ - OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ - OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ - OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ - OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */ -}; - -static unsigned int pxa3xx_freqs_num; -static struct pxa3xx_freq_info *pxa3xx_freqs; -static struct cpufreq_frequency_table *pxa3xx_freqs_table; - -static int setup_freqs_table(struct cpufreq_policy *policy, - struct pxa3xx_freq_info *freqs, int num) -{ - struct cpufreq_frequency_table *table; - int i; - - table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL); - if (table == NULL) - return -ENOMEM; - - for (i = 0; i < num; i++) { - table[i].index = i; - table[i].frequency = freqs[i].cpufreq_mhz * 1000; - } - table[num].index = i; - table[num].frequency = CPUFREQ_TABLE_END; - - pxa3xx_freqs = freqs; - pxa3xx_freqs_num = num; - pxa3xx_freqs_table = table; - - return cpufreq_frequency_table_cpuinfo(policy, table); -} - -static void __update_core_freq(struct pxa3xx_freq_info *info) -{ - uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK; - uint32_t accr = ACCR; - uint32_t xclkcfg; - - accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK); - accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl); - - /* No clock until core PLL is re-locked */ - accr |= ACCR_XSPCLK(XSPCLK_NONE); - - xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2; /* turbo bit */ - - ACCR = accr; - __asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg)); - - while ((ACSR & mask) != (accr & mask)) - cpu_relax(); -} - -static void __update_bus_freq(struct pxa3xx_freq_info *info) -{ - uint32_t mask; - uint32_t accr = ACCR; - - mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK | - ACCR_DMCFS_MASK; - - accr &= ~mask; - accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) | - ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs); - - ACCR = accr; - - while ((ACSR & mask) != (accr & mask)) - cpu_relax(); -} - -static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table); -} - -static unsigned int pxa3xx_cpufreq_get(unsigned int cpu) -{ - return pxa3xx_get_clk_frequency_khz(0); -} - -static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct pxa3xx_freq_info *next; - struct cpufreq_freqs freqs; - unsigned long flags; - int idx; - - if (policy->cpu != 0) - return -EINVAL; - - /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table, - target_freq, relation, &idx)) - return -EINVAL; - - next = &pxa3xx_freqs[idx]; - - freqs.old = policy->cur; - freqs.new = next->cpufreq_mhz * 1000; - freqs.cpu = policy->cpu; - - pr_debug("CPU frequency from %d MHz to %d MHz%s\n", - freqs.old / 1000, freqs.new / 1000, - (freqs.old == freqs.new) ? " (skipped)" : ""); - - if (freqs.old == target_freq) - return 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - local_irq_save(flags); - __update_core_freq(next); - __update_bus_freq(next); - local_irq_restore(flags); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) -{ - int ret = -EINVAL; - - /* set default policy and cpuinfo */ - policy->cpuinfo.min_freq = 104000; - policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000; - policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->max = pxa3xx_get_clk_frequency_khz(0); - policy->cur = policy->min = policy->max; - - if (cpu_is_pxa300() || cpu_is_pxa310()) - ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs)); - - if (cpu_is_pxa320()) - ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs)); - - if (ret) { - pr_err("failed to setup frequency table\n"); - return ret; - } - - pr_info("CPUFREQ support for PXA3xx initialized\n"); - return 0; -} - -static struct cpufreq_driver pxa3xx_cpufreq_driver = { - .verify = pxa3xx_cpufreq_verify, - .target = pxa3xx_cpufreq_set, - .init = pxa3xx_cpufreq_init, - .get = pxa3xx_cpufreq_get, - .name = "pxa3xx-cpufreq", -}; - -static int __init cpufreq_init(void) -{ - if (cpu_is_pxa3xx()) - return cpufreq_register_driver(&pxa3xx_cpufreq_driver); - - return 0; -} -module_init(cpufreq_init); - -static void __exit cpufreq_exit(void) -{ - cpufreq_unregister_driver(&pxa3xx_cpufreq_driver); -} -module_exit(cpufreq_exit); - -MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h new file mode 100644 index 000000000000..665542e0c9e2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/generic.h @@ -0,0 +1 @@ +#include "../../generic.h" diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 14c1d47e1abf..d210c0f9c2c4 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -12,6 +12,8 @@ config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" depends on MACH_REALVIEW_EB select CPU_V7 + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -23,6 +25,8 @@ config REALVIEW_EB_ARM11MP depends on MACH_REALVIEW_EB select ARCH_HAS_BARRIERS if SMP select CPU_V6K + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -43,6 +47,8 @@ config MACH_REALVIEW_PB11MP select ARCH_HAS_BARRIERS if SMP select ARM_GIC select CPU_V6K + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_PATA_PLATFORM select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 @@ -85,6 +91,8 @@ config MACH_REALVIEW_PBX bool "Support RealView(R) Platform Baseboard Explore" select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_PATA_PLATFORM select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index 53818e5cd3ad..ac22dd41b135 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -12,7 +12,6 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/smp_plat.h> @@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void) { unsigned int v; - flush_cache_all(); asm volatile( " mcr p15, 0, %1, c7, c5, 0\n" " mcr p15, 0, %1, c7, c10, 4\n" diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 0a8663c5f2ba..f2f7088bfd22 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -37,7 +37,6 @@ config CPU_S3C2410 config CPU_S3C2412 bool "SAMSUNG S3C2412" - depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2412_DMA if S3C24XX_DMA @@ -48,7 +47,6 @@ config CPU_S3C2412 config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" - depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM @@ -86,7 +84,6 @@ config CPU_S3C244X config CPU_S3C2443 bool "SAMSUNG S3C2443" - depends on ARCH_S3C24XX select CPU_ARM920T select CPU_LLSERIAL_S3C2440 select S3C2443_COMMON @@ -139,7 +136,6 @@ config S3C24XX_SETUP_TS config S3C24XX_DMA bool "S3C2410 DMA support" - depends on ARCH_S3C24XX select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which @@ -148,7 +144,7 @@ config S3C24XX_DMA config S3C2410_DMA_DEBUG bool "S3C2410 DMA support debug" - depends on ARCH_S3C24XX && S3C2410_DMA + depends on S3C2410_DMA help Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. @@ -239,7 +235,7 @@ if CPU_S3C2410 config S3C2410_CPUFREQ bool - depends on CPU_FREQ_S3C24XX && CPU_S3C2410 + depends on CPU_FREQ_S3C24XX select S3C2410_CPUFREQ_UTILS help CPU Frequency scaling support for S3C2410 @@ -326,7 +322,6 @@ config PM_H1940 config MACH_N30 bool "Acer N30 family" - select MACH_N35 select S3C_DEV_NAND select S3C_DEV_USB_HOST help @@ -386,14 +381,13 @@ if CPU_S3C2412 config CPU_S3C2412_ONLY bool - depends on ARCH_S3C24XX && !CPU_S3C2410 && \ - !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ - !CPU_S3C2443 && CPU_S3C2412 + depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ + !CPU_S3C2442 && !CPU_S3C2443 default y config S3C2412_CPUFREQ bool - depends on CPU_FREQ_S3C24XX && CPU_S3C2412 + depends on CPU_FREQ_S3C24XX default y select S3C2412_IOTIMING help @@ -649,7 +643,6 @@ comment "S3C2442 Boards" config MACH_NEO1973_GTA02 bool "Openmoko GTA02 / Freerunner phone" select I2C - select MACH_NEO1973 select MFD_PCF50633 select PCF50633_GPIO select POWER_SUPPLY @@ -670,10 +663,7 @@ config MACH_RX1950 help Say Y here if you're using HP iPAQ rx1950 -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - -endif # CPU_S3C2440 +endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 04b87ec92537..1069b5680826 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -123,6 +123,11 @@ static struct clk s3c2440_clk_ac97 = { .ctrlbit = S3C2440_CLKCON_AC97, }; +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) + static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) { unsigned long ucon0, ucon1, ucon2, divisor; diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index d97533d21ac4..c157103ed8eb 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -236,6 +236,11 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) /* Serial port registrations */ +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) + static struct resource s3c2410_uart0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K), [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \ diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c index 5f181e733eee..3c0e78ede0da 100644 --- a/arch/arm/mach-s3c24xx/cpufreq.c +++ b/arch/arm/mach-s3c24xx/cpufreq.c @@ -204,7 +204,6 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, freqs.old = cpu_cur.freq; freqs.new = cpu_new.freq; - freqs.freqs.cpu = 0; freqs.freqs.old = cpu_cur.freq.armclk / 1000; freqs.freqs.new = cpu_new.freq.armclk / 1000; @@ -218,9 +217,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); /* start the frequency change */ - - if (policy) - cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE); /* If hclk is staying the same, then we do not need to * re-write the IO or the refresh timings whilst we are changing @@ -264,8 +261,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, local_irq_restore(flags); /* notify everyone we've done this */ - if (policy) - cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE); + cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE); s3c_freq_dbg("%s: finished\n", __func__); return 0; diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index a6c94b820954..30aa53ff07a6 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c @@ -25,10 +25,8 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index c0e8c3f5057e..ab1700ec8e64 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -25,10 +25,8 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index 1c08eccd9425..cd25de28804c 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -25,10 +25,8 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 000e4c69fce9..5fe3539dc2b5 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -25,10 +25,8 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { \ diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 6b72d5a4b377..b55da1d8cd8f 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,6 @@ */ enum dma_ch { - DMACH_DT_PROP = -1, /* not yet supported, do not use */ DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index 43cada8019b4..b6dd4cb5a2ec 100644 --- a/arch/arm/mach-s3c24xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h @@ -192,10 +192,8 @@ #if defined(CONFIG_CPU_S3C2416) #define NR_IRQS (IRQ_S3C2416_I2S1 + 1) -#elif defined(CONFIG_CPU_S3C2443) -#define NR_IRQS (IRQ_S3C2443_AC97+1) #else -#define NR_IRQS (IRQ_S3C2440_AC97+1) +#define NR_IRQS (IRQ_S3C2443_AC97 + 1) #endif /* compatibility define. */ diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index e4d67a33ebee..44ca018e1f96 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -56,7 +56,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> -#include <plat/regs-iic.h> #include <plat/regs-serial.h> #include <plat/samsung-time.h> diff --git a/arch/arm/mach-s3c24xx/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h index 98fd4a05587c..61b3d1387d76 100644 --- a/arch/arm/mach-s3c24xx/regs-dsc.h +++ b/arch/arm/mach-s3c24xx/regs-dsc.h @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h - * +/* * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> * http://www.simtec.co.uk/products/SWLINUX/ * @@ -12,209 +11,15 @@ #ifndef __ASM_ARCH_REGS_DSC_H -#define __ASM_ARCH_REGS_DSC_H "2440-dsc" +#define __ASM_ARCH_REGS_DSC_H __FILE__ -#if defined(CONFIG_CPU_S3C2412) +/* S3C2412 */ #define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) #define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) -#endif - -#if defined(CONFIG_CPU_S3C2416) -#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0) -#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4) -#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8) -#define S3C2416_DSC3 S3C2410_GPIOREG(0x110) - -#define S3C2416_SELECT_DSC0 (0 << 30) -#define S3C2416_SELECT_DSC1 (1 << 30) -#define S3C2416_SELECT_DSC2 (2 << 30) -#define S3C2416_SELECT_DSC3 (3 << 30) - -#define S3C2416_DSC_GETSHIFT(x) (x & 30) - -#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28) -#define S3C2416_DSC0_CF_5mA (0 << 28) -#define S3C2416_DSC0_CF_10mA (1 << 28) -#define S3C2416_DSC0_CF_15mA (2 << 28) -#define S3C2416_DSC0_CF_21mA (3 << 28) -#define S3C2416_DSC0_CF_MASK (3 << 28) - -#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26) -#define S3C2416_DSC0_nRBE_5mA (0 << 26) -#define S3C2416_DSC0_nRBE_10mA (1 << 26) -#define S3C2416_DSC0_nRBE_15mA (2 << 26) -#define S3C2416_DSC0_nRBE_21mA (3 << 26) -#define S3C2416_DSC0_nRBE_MASK (3 << 26) - -#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24) -#define S3C2416_DSC0_nROE_5mA (0 << 24) -#define S3C2416_DSC0_nROE_10mA (1 << 24) -#define S3C2416_DSC0_nROE_15mA (2 << 24) -#define S3C2416_DSC0_nROE_21mA (3 << 24) -#define S3C2416_DSC0_nROE_MASK (3 << 24) - -#endif - -#if defined(CONFIG_CPU_S3C244X) +/* S3C2440 */ #define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) #define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) -#define S3C2440_SELECT_DSC0 (0) -#define S3C2440_SELECT_DSC1 (1<<31) - -#define S3C2440_DSC_GETSHIFT(x) ((x) & 31) - -#define S3C2440_DSC0_DISABLE (1<<31) - -#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8) -#define S3C2440_DSC0_ADDR_12mA (0<<8) -#define S3C2440_DSC0_ADDR_10mA (1<<8) -#define S3C2440_DSC0_ADDR_8mA (2<<8) -#define S3C2440_DSC0_ADDR_6mA (3<<8) -#define S3C2440_DSC0_ADDR_MASK (3<<8) - -/* D24..D31 */ -#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6) -#define S3C2440_DSC0_DATA3_12mA (0<<6) -#define S3C2440_DSC0_DATA3_10mA (1<<6) -#define S3C2440_DSC0_DATA3_8mA (2<<6) -#define S3C2440_DSC0_DATA3_6mA (3<<6) -#define S3C2440_DSC0_DATA3_MASK (3<<6) - -/* D16..D23 */ -#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4) -#define S3C2440_DSC0_DATA2_12mA (0<<4) -#define S3C2440_DSC0_DATA2_10mA (1<<4) -#define S3C2440_DSC0_DATA2_8mA (2<<4) -#define S3C2440_DSC0_DATA2_6mA (3<<4) -#define S3C2440_DSC0_DATA2_MASK (3<<4) - -/* D8..D15 */ -#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2) -#define S3C2440_DSC0_DATA1_12mA (0<<2) -#define S3C2440_DSC0_DATA1_10mA (1<<2) -#define S3C2440_DSC0_DATA1_8mA (2<<2) -#define S3C2440_DSC0_DATA1_6mA (3<<2) -#define S3C2440_DSC0_DATA1_MASK (3<<2) - -/* D0..D7 */ -#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0) -#define S3C2440_DSC0_DATA0_12mA (0<<0) -#define S3C2440_DSC0_DATA0_10mA (1<<0) -#define S3C2440_DSC0_DATA0_8mA (2<<0) -#define S3C2440_DSC0_DATA0_6mA (3<<0) -#define S3C2440_DSC0_DATA0_MASK (3<<0) - -#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28) -#define S3C2440_DSC1_SCK1_12mA (0<<28) -#define S3C2440_DSC1_SCK1_10mA (1<<28) -#define S3C2440_DSC1_SCK1_8mA (2<<28) -#define S3C2440_DSC1_SCK1_6mA (3<<28) -#define S3C2440_DSC1_SCK1_MASK (3<<28) - -#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26) -#define S3C2440_DSC1_SCK0_12mA (0<<26) -#define S3C2440_DSC1_SCK0_10mA (1<<26) -#define S3C2440_DSC1_SCK0_8mA (2<<26) -#define S3C2440_DSC1_SCK0_6mA (3<<26) -#define S3C2440_DSC1_SCK0_MASK (3<<26) - -#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24) -#define S3C2440_DSC1_SCKE_10mA (0<<24) -#define S3C2440_DSC1_SCKE_8mA (1<<24) -#define S3C2440_DSC1_SCKE_6mA (2<<24) -#define S3C2440_DSC1_SCKE_4mA (3<<24) -#define S3C2440_DSC1_SCKE_MASK (3<<24) - -/* SDRAM nRAS/nCAS */ -#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22) -#define S3C2440_DSC1_SDR_10mA (0<<22) -#define S3C2440_DSC1_SDR_8mA (1<<22) -#define S3C2440_DSC1_SDR_6mA (2<<22) -#define S3C2440_DSC1_SDR_4mA (3<<22) -#define S3C2440_DSC1_SDR_MASK (3<<22) - -/* NAND Flash Controller */ -#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20) -#define S3C2440_DSC1_NFC_10mA (0<<20) -#define S3C2440_DSC1_NFC_8mA (1<<20) -#define S3C2440_DSC1_NFC_6mA (2<<20) -#define S3C2440_DSC1_NFC_4mA (3<<20) -#define S3C2440_DSC1_NFC_MASK (3<<20) - -/* nBE[0..3] */ -#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18) -#define S3C2440_DSC1_nBE_10mA (0<<18) -#define S3C2440_DSC1_nBE_8mA (1<<18) -#define S3C2440_DSC1_nBE_6mA (2<<18) -#define S3C2440_DSC1_nBE_4mA (3<<18) -#define S3C2440_DSC1_nBE_MASK (3<<18) - -#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16) -#define S3C2440_DSC1_WOE_10mA (0<<16) -#define S3C2440_DSC1_WOE_8mA (1<<16) -#define S3C2440_DSC1_WOE_6mA (2<<16) -#define S3C2440_DSC1_WOE_4mA (3<<16) -#define S3C2440_DSC1_WOE_MASK (3<<16) - -#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14) -#define S3C2440_DSC1_CS7_10mA (0<<14) -#define S3C2440_DSC1_CS7_8mA (1<<14) -#define S3C2440_DSC1_CS7_6mA (2<<14) -#define S3C2440_DSC1_CS7_4mA (3<<14) -#define S3C2440_DSC1_CS7_MASK (3<<14) - -#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12) -#define S3C2440_DSC1_CS6_10mA (0<<12) -#define S3C2440_DSC1_CS6_8mA (1<<12) -#define S3C2440_DSC1_CS6_6mA (2<<12) -#define S3C2440_DSC1_CS6_4mA (3<<12) -#define S3C2440_DSC1_CS6_MASK (3<<12) - -#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10) -#define S3C2440_DSC1_CS5_10mA (0<<10) -#define S3C2440_DSC1_CS5_8mA (1<<10) -#define S3C2440_DSC1_CS5_6mA (2<<10) -#define S3C2440_DSC1_CS5_4mA (3<<10) -#define S3C2440_DSC1_CS5_MASK (3<<10) - -#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8) -#define S3C2440_DSC1_CS4_10mA (0<<8) -#define S3C2440_DSC1_CS4_8mA (1<<8) -#define S3C2440_DSC1_CS4_6mA (2<<8) -#define S3C2440_DSC1_CS4_4mA (3<<8) -#define S3C2440_DSC1_CS4_MASK (3<<8) - -#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6) -#define S3C2440_DSC1_CS3_10mA (0<<6) -#define S3C2440_DSC1_CS3_8mA (1<<6) -#define S3C2440_DSC1_CS3_6mA (2<<6) -#define S3C2440_DSC1_CS3_4mA (3<<6) -#define S3C2440_DSC1_CS3_MASK (3<<6) - -#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4) -#define S3C2440_DSC1_CS2_10mA (0<<4) -#define S3C2440_DSC1_CS2_8mA (1<<4) -#define S3C2440_DSC1_CS2_6mA (2<<4) -#define S3C2440_DSC1_CS2_4mA (3<<4) -#define S3C2440_DSC1_CS2_MASK (3<<4) - -#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2) -#define S3C2440_DSC1_CS1_10mA (0<<2) -#define S3C2440_DSC1_CS1_8mA (1<<2) -#define S3C2440_DSC1_CS1_6mA (2<<2) -#define S3C2440_DSC1_CS1_4mA (3<<2) -#define S3C2440_DSC1_CS1_MASK (3<<2) - -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) -#define S3C2440_DSC1_CS0_10mA (0<<0) -#define S3C2440_DSC1_CS0_8mA (1<<0) -#define S3C2440_DSC1_CS0_6mA (2<<0) -#define S3C2440_DSC1_CS0_4mA (3<<0) -#define S3C2440_DSC1_CS0_MASK (3<<0) - -#endif /* CONFIG_CPU_S3C2440 */ - #endif /* __ASM_ARCH_REGS_DSC_H */ diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index f9ce1dc28ce4..31d0c9101272 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o obj-y += dev-uart.o obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o # Device setup diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c index ead5fab0dbb5..3c8ab07c2012 100644 --- a/arch/arm/mach-s3c64xx/cpuidle.c +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -40,12 +40,9 @@ static int s3c64xx_enter_idle(struct cpuidle_device *dev, return index; } -static DEFINE_PER_CPU(struct cpuidle_device, s3c64xx_cpuidle_device); - static struct cpuidle_driver s3c64xx_cpuidle_driver = { .name = "s3c64xx_cpuidle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states = { { .enter = s3c64xx_enter_idle, @@ -61,16 +58,6 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = { static int __init s3c64xx_init_cpuidle(void) { - int ret; - - cpuidle_register_driver(&s3c64xx_cpuidle_driver); - - ret = cpuidle_register_device(&s3c64xx_cpuidle_device); - if (ret) { - pr_err("Failed to register cpuidle device: %d\n", ret); - return ret; - } - - return 0; + return cpuidle_register(&s3c64xx_cpuidle_driver, NULL); } device_initcall(s3c64xx_init_cpuidle); diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 6af1aa1ef213..759846c28d12 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -509,6 +509,7 @@ int s3c2410_dma_request(enum dma_ch channel, chan->client = client; chan->in_use = 1; chan->peripheral = channel; + chan->flags = 0; local_irq_restore(flags); diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 57b1ff4b2d7c..fe1a98cf0e4c 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -21,7 +21,6 @@ */ enum dma_ch { /* DMA0/SDMA0 */ - DMACH_DT_PROP = -1, /* not yet supported, do not use */ DMACH_UART0 = 0, DMACH_UART0_SRC2, DMACH_UART1, diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index bf3d1c09b085..a946b759fabd 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -210,6 +210,7 @@ static struct arizona_pdata wm5102_reva_pdata = { .gpio_base = CODEC_GPIO_BASE, .irq_active_high = true, .micd_pol_gpio = CODEC_GPIO_BASE + 4, + .micd_rate = 6, .gpio_defaults = { [2] = 0x10000, /* AIF3TXLRCLK */ [3] = 0x4, /* OPCLK */ diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c index c8174d95339b..ca960bda02fd 100644 --- a/arch/arm/mach-s3c64xx/setup-usb-phy.c +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -76,7 +76,7 @@ static int s3c_usb_otgphy_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_init(pdev); return -EINVAL; @@ -84,7 +84,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h index 9fbd3ae2b401..c41f912e9e1f 100644 --- a/arch/arm/mach-s5pc100/common.h +++ b/arch/arm/mach-s5pc100/common.h @@ -20,18 +20,9 @@ void s5pc100_setup_clocks(void); void s5pc100_restart(char mode, const char *cmd); -#ifdef CONFIG_CPU_S5PC100 - extern int s5pc100_init(void); extern void s5pc100_map_io(void); extern void s5pc100_init_clocks(int xtal); extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no); -#else -#define s5pc100_init_clocks NULL -#define s5pc100_init_uarts NULL -#define s5pc100_map_io NULL -#define s5pc100_init NULL -#endif - #endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */ diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h index 6ed2af5c7518..0a1cc0aef720 100644 --- a/arch/arm/mach-s5pv210/common.h +++ b/arch/arm/mach-s5pv210/common.h @@ -20,18 +20,9 @@ void s5pv210_setup_clocks(void); void s5pv210_restart(char mode, const char *cmd); -#ifdef CONFIG_CPU_S5PV210 - extern int s5pv210_init(void); extern void s5pv210_map_io(void); extern void s5pv210_init_clocks(int xtal); extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no); -#else -#define s5pv210_init_clocks NULL -#define s5pv210_init_uarts NULL -#define s5pv210_map_io NULL -#define s5pv210_init NULL -#endif - #endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */ diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c index 356a0900af03..b2ee5333f89c 100644 --- a/arch/arm/mach-s5pv210/setup-usb-phy.c +++ b/arch/arm/mach-s5pv210/setup-usb-phy.c @@ -80,7 +80,7 @@ static int s5pv210_usb_otgphy_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s5pv210_usb_otgphy_init(pdev); return -EINVAL; @@ -88,7 +88,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s5pv210_usb_otgphy_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index ca14dbdcfb22..04f9784ff0ed 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -4,7 +4,7 @@ menu "SA11x0 Implementations" config SA1100_ASSABET bool "Assabet" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ help Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Microprocessor Development Board (also known as the Assabet). @@ -20,7 +20,7 @@ config ASSABET_NEPONSET config SA1100_CERF bool "CerfBoard" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ help The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). More information is available at: @@ -47,7 +47,7 @@ endchoice config SA1100_COLLIE bool "Sharp Zaurus SL5500" - # FIXME: select CPU_FREQ_SA11x0 + # FIXME: select ARM_SA11x0_CPUFREQ select SHARP_LOCOMO select SHARP_PARAM select SHARP_SCOOP @@ -56,7 +56,7 @@ config SA1100_COLLIE config SA1100_H3100 bool "Compaq iPAQ H3100" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ select HTC_EGPIO help Say Y here if you intend to run this kernel on the Compaq iPAQ @@ -67,7 +67,7 @@ config SA1100_H3100 config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ select HTC_EGPIO help Say Y here if you intend to run this kernel on the Compaq iPAQ @@ -78,7 +78,7 @@ config SA1100_H3600 config SA1100_BADGE4 bool "HP Labs BadgePAD 4" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ select SA1111 help Say Y here if you want to build a kernel for the HP Laboratories @@ -86,7 +86,7 @@ config SA1100_BADGE4 config SA1100_JORNADA720 bool "HP Jornada 720" - # FIXME: select CPU_FREQ_SA11x0 + # FIXME: select ARM_SA11x0_CPUFREQ select SA1111 help Say Y here if you want to build a kernel for the HP Jornada 720 @@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP config SA1100_HACKKIT bool "HackKit Core CPU Board" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help Say Y here to support the HackKit Core CPU Board <http://hackkit.eletztrick.de>; config SA1100_LART bool "LART" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help Say Y here if you are using the Linux Advanced Radio Terminal (also known as the LART). See <http://www.lartmaker.nl/> for @@ -120,7 +120,7 @@ config SA1100_LART config SA1100_NANOENGINE bool "nanoEngine" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ select PCI select PCI_NANOENGINE help @@ -130,7 +130,7 @@ config SA1100_NANOENGINE config SA1100_PLEB bool "PLEB" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help Say Y here if you are using version 1 of the Portable Linux Embedded Board (also known as PLEB). @@ -139,7 +139,7 @@ config SA1100_PLEB config SA1100_SHANNON bool "Shannon" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help The Shannon (also known as a Tuxscreen, and also as a IS2630) was a limited edition webphone produced by Philips. The Shannon is a SA1100 @@ -148,7 +148,7 @@ config SA1100_SHANNON config SA1100_SIMPAD bool "Simpad" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ help The SIEMENS webpad SIMpad is based on the StrongARM 1110. There are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 1aed9e70465d..2732eef48966 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -8,9 +8,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_FREQ_SA1100) += cpu-sa1100.o -obj-$(CONFIG_CPU_FREQ_SA1110) += cpu-sa1110.o - # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c deleted file mode 100644 index e8f4d1e19233..000000000000 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * cpu-sa1100.c: clock scaling for the SA1100 - * - * Copyright (C) 2000 2001, The Delft University of Technology - * - * Authors: - * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version - * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): - * - major rewrite for linux-2.3.99 - * - rewritten for the more generic power management scheme in - * linux-2.4.5-rmk1 - * - * This software has been developed while working on the LART - * computing board (http://www.lartmaker.nl/), which is - * sponsored by the Mobile Multi-media Communications - * (http://www.mobimedia.org/) and Ubiquitous Communications - * (http://www.ubicom.tudelft.nl/) projects. - * - * The authors can be reached at: - * - * Erik Mouw - * Information and Communication Theory Group - * Faculty of Information Technology and Systems - * Delft University of Technology - * P.O. Box 5031 - * 2600 GA Delft - * The Netherlands - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Theory of operations - * ==================== - * - * Clock scaling can be used to lower the power consumption of the CPU - * core. This will give you a somewhat longer running time. - * - * The SA-1100 has a single register to change the core clock speed: - * - * PPCR 0x90020014 PLL config - * - * However, the DRAM timings are closely related to the core clock - * speed, so we need to change these, too. The used registers are: - * - * MDCNFG 0xA0000000 DRAM config - * MDCAS0 0xA0000004 Access waveform - * MDCAS1 0xA0000008 Access waveform - * MDCAS2 0xA000000C Access waveform - * - * Care must be taken to change the DRAM parameters the correct way, - * because otherwise the DRAM becomes unusable and the kernel will - * crash. - * - * The simple solution to avoid a kernel crash is to put the actual - * clock change in ROM and jump to that code from the kernel. The main - * disadvantage is that the ROM has to be modified, which is not - * possible on all SA-1100 platforms. Another disadvantage is that - * jumping to ROM makes clock switching unnecessary complicated. - * - * The idea behind this driver is that the memory configuration can be - * changed while running from DRAM (even with interrupts turned on!) - * as long as all re-configuration steps yield a valid DRAM - * configuration. The advantages are clear: it will run on all SA-1100 - * platforms, and the code is very simple. - * - * If you really want to understand what is going on in - * sa1100_update_dram_timings(), you'll have to read sections 8.2, - * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor - * Developers Manual" (available for free from Intel). - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/io.h> - -#include <asm/cputype.h> - -#include <mach/hardware.h> - -#include "generic.h" - -struct sa1100_dram_regs { - int speed; - u32 mdcnfg; - u32 mdcas0; - u32 mdcas1; - u32 mdcas2; -}; - - -static struct cpufreq_driver sa1100_driver; - -static struct sa1100_dram_regs sa1100_dram_settings[] = { - /*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */ - { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */ - { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */ - { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */ - {103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */ - {118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */ - {132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */ - {147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */ - {162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */ - {176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */ - {191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */ - {206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */ - {221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */ - {235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */ - {250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */ - {265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */ - {280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */ - { 0, 0, 0, 0, 0 } /* last entry */ -}; - -static void sa1100_update_dram_timings(int current_speed, int new_speed) -{ - struct sa1100_dram_regs *settings = sa1100_dram_settings; - - /* find speed */ - while (settings->speed != 0) { - if (new_speed == settings->speed) - break; - - settings++; - } - - if (settings->speed == 0) { - panic("%s: couldn't find dram setting for speed %d\n", - __func__, new_speed); - } - - /* No risk, no fun: run with interrupts on! */ - if (new_speed > current_speed) { - /* We're going FASTER, so first relax the memory - * timings before changing the core frequency - */ - - /* Half the memory access clock */ - MDCNFG |= MDCNFG_CDB2; - - /* The order of these statements IS important, keep 8 - * pulses!! - */ - MDCAS2 = settings->mdcas2; - MDCAS1 = settings->mdcas1; - MDCAS0 = settings->mdcas0; - MDCNFG = settings->mdcnfg; - } else { - /* We're going SLOWER: first decrease the core - * frequency and then tighten the memory settings. - */ - - /* Half the memory access clock */ - MDCNFG |= MDCNFG_CDB2; - - /* The order of these statements IS important, keep 8 - * pulses!! - */ - MDCAS0 = settings->mdcas0; - MDCAS1 = settings->mdcas1; - MDCAS2 = settings->mdcas2; - MDCNFG = settings->mdcnfg; - } -} - -static int sa1100_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int cur = sa11x0_getspeed(0); - unsigned int new_ppcr; - struct cpufreq_freqs freqs; - - new_ppcr = sa11x0_freq_to_ppcr(target_freq); - switch (relation) { - case CPUFREQ_RELATION_L: - if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max) - new_ppcr--; - break; - case CPUFREQ_RELATION_H: - if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) && - (sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min)) - new_ppcr--; - break; - } - - freqs.old = cur; - freqs.new = sa11x0_ppcr_to_freq(new_ppcr); - freqs.cpu = 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - if (freqs.new > cur) - sa1100_update_dram_timings(cur, freqs.new); - - PPCR = new_ppcr; - - if (freqs.new < cur) - sa1100_update_dram_timings(cur, freqs.new); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int __init sa1100_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - policy->cur = policy->min = policy->max = sa11x0_getspeed(0); - policy->cpuinfo.min_freq = 59000; - policy->cpuinfo.max_freq = 287000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return 0; -} - -static struct cpufreq_driver sa1100_driver __refdata = { - .flags = CPUFREQ_STICKY, - .verify = sa11x0_verify_speed, - .target = sa1100_target, - .get = sa11x0_getspeed, - .init = sa1100_cpu_init, - .name = "sa1100", -}; - -static int __init sa1100_dram_init(void) -{ - if (cpu_is_sa1100()) - return cpufreq_register_driver(&sa1100_driver); - else - return -ENODEV; -} - -arch_initcall(sa1100_dram_init); diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c deleted file mode 100644 index 48c45b0c92bb..000000000000 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/cpu-sa1110.c - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note: there are two erratas that apply to the SA1110 here: - * 7 - SDRAM auto-power-up failure (rev A0) - * 13 - Corruption of internal register reads/writes following - * SDRAM reads (rev A0, B0, B1) - * - * We ignore rev. A0 and B0 devices; I don't think they're worth supporting. - * - * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type - */ -#include <linux/cpufreq.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/moduleparam.h> -#include <linux/types.h> - -#include <asm/cputype.h> -#include <asm/mach-types.h> - -#include <mach/hardware.h> - -#include "generic.h" - -#undef DEBUG - -struct sdram_params { - const char name[20]; - u_char rows; /* bits */ - u_char cas_latency; /* cycles */ - u_char tck; /* clock cycle time (ns) */ - u_char trcd; /* activate to r/w (ns) */ - u_char trp; /* precharge to activate (ns) */ - u_char twr; /* write recovery time (ns) */ - u_short refresh; /* refresh time for array (us) */ -}; - -struct sdram_info { - u_int mdcnfg; - u_int mdrefr; - u_int mdcas[3]; -}; - -static struct sdram_params sdram_tbl[] __initdata = { - { /* Toshiba TC59SM716 CL2 */ - .name = "TC59SM716-CL2", - .rows = 12, - .tck = 10, - .trcd = 20, - .trp = 20, - .twr = 10, - .refresh = 64000, - .cas_latency = 2, - }, { /* Toshiba TC59SM716 CL3 */ - .name = "TC59SM716-CL3", - .rows = 12, - .tck = 8, - .trcd = 20, - .trp = 20, - .twr = 8, - .refresh = 64000, - .cas_latency = 3, - }, { /* Samsung K4S641632D TC75 */ - .name = "K4S641632D", - .rows = 14, - .tck = 9, - .trcd = 27, - .trp = 20, - .twr = 9, - .refresh = 64000, - .cas_latency = 3, - }, { /* Samsung K4S281632B-1H */ - .name = "K4S281632B-1H", - .rows = 12, - .tck = 10, - .trp = 20, - .twr = 10, - .refresh = 64000, - .cas_latency = 3, - }, { /* Samsung KM416S4030CT */ - .name = "KM416S4030CT", - .rows = 13, - .tck = 8, - .trcd = 24, /* 3 CLKs */ - .trp = 24, /* 3 CLKs */ - .twr = 16, /* Trdl: 2 CLKs */ - .refresh = 64000, - .cas_latency = 3, - }, { /* Winbond W982516AH75L CL3 */ - .name = "W982516AH75L", - .rows = 16, - .tck = 8, - .trcd = 20, - .trp = 20, - .twr = 8, - .refresh = 64000, - .cas_latency = 3, - }, { /* Micron MT48LC8M16A2TG-75 */ - .name = "MT48LC8M16A2TG-75", - .rows = 12, - .tck = 8, - .trcd = 20, - .trp = 20, - .twr = 8, - .refresh = 64000, - .cas_latency = 3, - }, -}; - -static struct sdram_params sdram_params; - -/* - * Given a period in ns and frequency in khz, calculate the number of - * cycles of frequency in period. Note that we round up to the next - * cycle, even if we are only slightly over. - */ -static inline u_int ns_to_cycles(u_int ns, u_int khz) -{ - return (ns * khz + 999999) / 1000000; -} - -/* - * Create the MDCAS register bit pattern. - */ -static inline void set_mdcas(u_int *mdcas, int delayed, u_int rcd) -{ - u_int shift; - - rcd = 2 * rcd - 1; - shift = delayed + 1 + rcd; - - mdcas[0] = (1 << rcd) - 1; - mdcas[0] |= 0x55555555 << shift; - mdcas[1] = mdcas[2] = 0x55555555 << (shift & 1); -} - -static void -sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz, - struct sdram_params *sdram) -{ - u_int mem_khz, sd_khz, trp, twr; - - mem_khz = cpu_khz / 2; - sd_khz = mem_khz; - - /* - * If SDCLK would invalidate the SDRAM timings, - * run SDCLK at half speed. - * - * CPU steppings prior to B2 must either run the memory at - * half speed or use delayed read latching (errata 13). - */ - if ((ns_to_cycles(sdram->tck, sd_khz) > 1) || - (CPU_REVISION < CPU_SA1110_B2 && sd_khz < 62000)) - sd_khz /= 2; - - sd->mdcnfg = MDCNFG & 0x007f007f; - - twr = ns_to_cycles(sdram->twr, mem_khz); - - /* trp should always be >1 */ - trp = ns_to_cycles(sdram->trp, mem_khz) - 1; - if (trp < 1) - trp = 1; - - sd->mdcnfg |= trp << 8; - sd->mdcnfg |= trp << 24; - sd->mdcnfg |= sdram->cas_latency << 12; - sd->mdcnfg |= sdram->cas_latency << 28; - sd->mdcnfg |= twr << 14; - sd->mdcnfg |= twr << 30; - - sd->mdrefr = MDREFR & 0xffbffff0; - sd->mdrefr |= 7; - - if (sd_khz != mem_khz) - sd->mdrefr |= MDREFR_K1DB2; - - /* initial number of '1's in MDCAS + 1 */ - set_mdcas(sd->mdcas, sd_khz >= 62000, - ns_to_cycles(sdram->trcd, mem_khz)); - -#ifdef DEBUG - printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n", - sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], - sd->mdcas[2]); -#endif -} - -/* - * Set the SDRAM refresh rate. - */ -static inline void sdram_set_refresh(u_int dri) -{ - MDREFR = (MDREFR & 0xffff000f) | (dri << 4); - (void) MDREFR; -} - -/* - * Update the refresh period. We do this such that we always refresh - * the SDRAMs within their permissible period. The refresh period is - * always a multiple of the memory clock (fixed at cpu_clock / 2). - * - * FIXME: we don't currently take account of burst accesses here, - * but neither do Intels DM nor Angel. - */ -static void -sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram) -{ - u_int ns_row = (sdram->refresh * 1000) >> sdram->rows; - u_int dri = ns_to_cycles(ns_row, cpu_khz / 2) / 32; - -#ifdef DEBUG - mdelay(250); - printk(KERN_DEBUG "new dri value = %d\n", dri); -#endif - - sdram_set_refresh(dri); -} - -/* - * Ok, set the CPU frequency. - */ -static int sa1110_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct sdram_params *sdram = &sdram_params; - struct cpufreq_freqs freqs; - struct sdram_info sd; - unsigned long flags; - unsigned int ppcr, unused; - - switch (relation) { - case CPUFREQ_RELATION_L: - ppcr = sa11x0_freq_to_ppcr(target_freq); - if (sa11x0_ppcr_to_freq(ppcr) > policy->max) - ppcr--; - break; - case CPUFREQ_RELATION_H: - ppcr = sa11x0_freq_to_ppcr(target_freq); - if (ppcr && (sa11x0_ppcr_to_freq(ppcr) > target_freq) && - (sa11x0_ppcr_to_freq(ppcr-1) >= policy->min)) - ppcr--; - break; - default: - return -EINVAL; - } - - freqs.old = sa11x0_getspeed(0); - freqs.new = sa11x0_ppcr_to_freq(ppcr); - freqs.cpu = 0; - - sdram_calculate_timing(&sd, freqs.new, sdram); - -#if 0 - /* - * These values are wrong according to the SA1110 documentation - * and errata, but they seem to work. Need to get a storage - * scope on to the SDRAM signals to work out why. - */ - if (policy->max < 147500) { - sd.mdrefr |= MDREFR_K1DB2; - sd.mdcas[0] = 0xaaaaaa7f; - } else { - sd.mdrefr &= ~MDREFR_K1DB2; - sd.mdcas[0] = 0xaaaaaa9f; - } - sd.mdcas[1] = 0xaaaaaaaa; - sd.mdcas[2] = 0xaaaaaaaa; -#endif - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* - * The clock could be going away for some time. Set the SDRAMs - * to refresh rapidly (every 64 memory clock cycles). To get - * through the whole array, we need to wait 262144 mclk cycles. - * We wait 20ms to be safe. - */ - sdram_set_refresh(2); - if (!irqs_disabled()) - msleep(20); - else - mdelay(20); - - /* - * Reprogram the DRAM timings with interrupts disabled, and - * ensure that we are doing this within a complete cache line. - * This means that we won't access SDRAM for the duration of - * the programming. - */ - local_irq_save(flags); - asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)); - udelay(10); - __asm__ __volatile__("\n\ - b 2f \n\ - .align 5 \n\ -1: str %3, [%1, #0] @ MDCNFG \n\ - str %4, [%1, #28] @ MDREFR \n\ - str %5, [%1, #4] @ MDCAS0 \n\ - str %6, [%1, #8] @ MDCAS1 \n\ - str %7, [%1, #12] @ MDCAS2 \n\ - str %8, [%2, #0] @ PPCR \n\ - ldr %0, [%1, #0] \n\ - b 3f \n\ -2: b 1b \n\ -3: nop \n\ - nop" - : "=&r" (unused) - : "r" (&MDCNFG), "r" (&PPCR), "0" (sd.mdcnfg), - "r" (sd.mdrefr), "r" (sd.mdcas[0]), - "r" (sd.mdcas[1]), "r" (sd.mdcas[2]), "r" (ppcr)); - local_irq_restore(flags); - - /* - * Now, return the SDRAM refresh back to normal. - */ - sdram_update_refresh(freqs.new, sdram); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int __init sa1110_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - policy->cur = policy->min = policy->max = sa11x0_getspeed(0); - policy->cpuinfo.min_freq = 59000; - policy->cpuinfo.max_freq = 287000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return 0; -} - -/* sa1110_driver needs __refdata because it must remain after init registers - * it with cpufreq_register_driver() */ -static struct cpufreq_driver sa1110_driver __refdata = { - .flags = CPUFREQ_STICKY, - .verify = sa11x0_verify_speed, - .target = sa1110_target, - .get = sa11x0_getspeed, - .init = sa1110_cpu_init, - .name = "sa1110", -}; - -static struct sdram_params *sa1110_find_sdram(const char *name) -{ - struct sdram_params *sdram; - - for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); - sdram++) - if (strcmp(name, sdram->name) == 0) - return sdram; - - return NULL; -} - -static char sdram_name[16]; - -static int __init sa1110_clk_init(void) -{ - struct sdram_params *sdram; - const char *name = sdram_name; - - if (!cpu_is_sa1110()) - return -ENODEV; - - if (!name[0]) { - if (machine_is_assabet()) - name = "TC59SM716-CL3"; - if (machine_is_pt_system3()) - name = "K4S641632D"; - if (machine_is_h3100()) - name = "KM416S4030CT"; - if (machine_is_jornada720()) - name = "K4S281632B-1H"; - if (machine_is_nanoengine()) - name = "MT48LC8M16A2TG-75"; - } - - sdram = sa1110_find_sdram(name); - if (sdram) { - printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d" - " twr: %d refresh: %d cas_latency: %d\n", - sdram->tck, sdram->trcd, sdram->trp, - sdram->twr, sdram->refresh, sdram->cas_latency); - - memcpy(&sdram_params, sdram, sizeof(sdram_params)); - - return cpufreq_register_driver(&sa1110_driver); - } - - return 0; -} - -module_param_string(sdram, sdram_name, sizeof(sdram_name), 0); -arch_initcall(sa1110_clk_init); diff --git a/arch/arm/mach-sa1100/include/mach/generic.h b/arch/arm/mach-sa1100/include/mach/generic.h new file mode 100644 index 000000000000..665542e0c9e2 --- /dev/null +++ b/arch/arm/mach-sa1100/include/mach/generic.h @@ -0,0 +1 @@ +#include "../../generic.h" diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index b63dec848195..153555724988 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -10,6 +10,7 @@ #include <linux/sched.h> #include <linux/serial_8250.h> #include <linux/io.h> +#include <linux/cpu.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -130,7 +131,7 @@ static void __init shark_timer_init(void) static void shark_init_early(void) { - disable_hlt(); + cpu_idle_poll_ctrl(true); } MACHINE_START(SHARK, "Shark") diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index f2ec0777cfbe..881e5c0e41dd 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -24,6 +24,7 @@ #include <linux/err.h> #include <linux/kernel.h> #include <linux/input.h> +#include <linux/platform_data/st1232_pdata.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/gpio.h> @@ -169,7 +170,7 @@ static int usbhsf_get_id(struct platform_device *pdev) return USBHS_GADGET; } -static void usbhsf_power_ctrl(struct platform_device *pdev, +static int usbhsf_power_ctrl(struct platform_device *pdev, void __iomem *base, int enable) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -223,6 +224,8 @@ static void usbhsf_power_ctrl(struct platform_device *pdev, clk_disable(priv->pci); /* usb work around */ clk_disable(priv->usb24); /* usb work around */ } + + return 0; } static int usbhsf_get_vbus(struct platform_device *pdev) @@ -239,7 +242,7 @@ static irqreturn_t usbhsf_interrupt(int irq, void *data) return IRQ_HANDLED; } -static void usbhsf_hardware_exit(struct platform_device *pdev) +static int usbhsf_hardware_exit(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -264,6 +267,8 @@ static void usbhsf_hardware_exit(struct platform_device *pdev) priv->usbh_base = NULL; free_irq(IRQ7, pdev); + + return 0; } static int usbhsf_hardware_init(struct platform_device *pdev) @@ -878,10 +883,15 @@ static struct platform_device i2c_gpio_device = { }; /* I2C */ +static struct st1232_pdata st1232_i2c0_pdata = { + .reset_gpio = 166, +}; + static struct i2c_board_info i2c0_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), .irq = evt2irq(0x0340), + .platform_data = &st1232_i2c0_pdata, }, { I2C_BOARD_INFO("wm8978", 0x1a), @@ -1005,7 +1015,6 @@ static void __init eva_init(void) /* Touchscreen */ gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ - gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ /* GETHER */ gpio_request(GPIO_FN_ET_CRS, NULL); diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index d34d12ae496b..95fe396f9604 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -155,12 +155,14 @@ static int usbhs_get_vbus(struct platform_device *pdev) return !((1 << 7) & __raw_readw(priv->cr2)); } -static void usbhs_phy_reset(struct platform_device *pdev) +static int usbhs_phy_reset(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); /* init phy */ __raw_writew(0x8a0a, priv->cr2); + + return 0; } static int usbhs_get_id(struct platform_device *pdev) @@ -202,7 +204,7 @@ static int usbhs_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs_hardware_exit(struct platform_device *pdev) +static int usbhs_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); @@ -210,6 +212,8 @@ static void usbhs_hardware_exit(struct platform_device *pdev) __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy); free_irq(IRQ15, pdev); + + return 0; } static u32 usbhs_pipe_cfg[] = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index db968a585ff0..979237c18dad 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -596,12 +596,14 @@ static int usbhs_get_vbus(struct platform_device *pdev) return usbhs_is_connected(usbhs_get_priv(pdev)); } -static void usbhs_phy_reset(struct platform_device *pdev) +static int usbhs_phy_reset(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); /* init phy */ __raw_writew(0x8a0a, priv->usbcrcaddr); + + return 0; } static int usbhs0_get_id(struct platform_device *pdev) @@ -628,11 +630,13 @@ static int usbhs0_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs0_hardware_exit(struct platform_device *pdev) +static int usbhs0_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); cancel_delayed_work_sync(&priv->work); + + return 0; } static struct usbhs_private usbhs0_private = { @@ -735,7 +739,7 @@ static int usbhs1_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs1_hardware_exit(struct platform_device *pdev) +static int usbhs1_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); @@ -743,6 +747,8 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); free_irq(IRQ8, pdev); + + return 0; } static int usbhs1_get_id(struct platform_device *pdev) diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c index 9e050268cde4..0afeb5c7061c 100644 --- a/arch/arm/mach-shmobile/cpuidle.c +++ b/arch/arm/mach-shmobile/cpuidle.c @@ -16,39 +16,22 @@ #include <asm/cpuidle.h> #include <asm/io.h> -int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, - int index) -{ - cpu_do_idle(); - return 0; -} - -static struct cpuidle_device shmobile_cpuidle_dev; static struct cpuidle_driver shmobile_cpuidle_default_driver = { .name = "shmobile_cpuidle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[0].enter = shmobile_enter_wfi, .safe_state_index = 0, /* C1 */ .state_count = 1, }; static struct cpuidle_driver *cpuidle_drv = &shmobile_cpuidle_default_driver; -void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv) +void __init shmobile_cpuidle_set_driver(struct cpuidle_driver *drv) { cpuidle_drv = drv; } -int shmobile_cpuidle_init(void) +int __init shmobile_cpuidle_init(void) { - struct cpuidle_device *dev = &shmobile_cpuidle_dev; - - cpuidle_register_driver(cpuidle_drv); - - dev->state_count = cpuidle_drv->state_count; - cpuidle_register_device(dev); - - return 0; + return cpuidle_register(cpuidle_drv, NULL); } diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 03f73def2fc6..1fef737a4c1a 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -14,9 +14,6 @@ extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); extern struct platform_suspend_ops shmobile_suspend_ops; struct cpuidle_driver; -struct cpuidle_device; -extern int shmobile_enter_wfi(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index); extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); extern void sh7372_init_irq(void); diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index a0826a48dd08..dec9293bb90d 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -410,11 +410,9 @@ static int sh7372_enter_a4s(struct cpuidle_device *dev, static struct cpuidle_driver sh7372_cpuidle_driver = { .name = "sh7372_cpuidle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .state_count = 5, .safe_state_index = 0, /* C1 */ .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[0].enter = shmobile_enter_wfi, .states[1] = { .name = "C2", .desc = "Core Standby Mode", @@ -450,12 +448,12 @@ static struct cpuidle_driver sh7372_cpuidle_driver = { }, }; -static void sh7372_cpuidle_init(void) +static void __init sh7372_cpuidle_init(void) { shmobile_cpuidle_set_driver(&sh7372_cpuidle_driver); } #else -static void sh7372_cpuidle_init(void) {} +static void __init sh7372_cpuidle_init(void) {} #endif #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 8225c16b371b..e38691b4d0dd 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/emev2.h> #include <asm/smp_plat.h> @@ -31,11 +30,6 @@ #define EMEV2_SCU_BASE 0x1e000000 -static void __cpuinit emev2_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu))); @@ -69,6 +63,5 @@ static void __init emev2_smp_init_cpus(void) struct smp_operations emev2_smp_ops __initdata = { .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, - .smp_secondary_init = emev2_secondary_init, .smp_boot_secondary = emev2_boot_secondary, }; diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index ea4535a5c4e2..a853bf182ed5 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/r8a7779.h> #include <asm/cacheflush.h> @@ -82,11 +81,6 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) return ret ? ret : 1; } -static void __cpuinit r8a7779_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { struct r8a7779_pm_ch *ch = NULL; @@ -181,7 +175,6 @@ static int r8a7779_cpu_disable(unsigned int cpu) struct smp_operations r8a7779_smp_ops __initdata = { .smp_init_cpus = r8a7779_smp_init_cpus, .smp_prepare_cpus = r8a7779_smp_prepare_cpus, - .smp_secondary_init = r8a7779_secondary_init, .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = r8a7779_cpu_kill, diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 5ae502b16437..496592b6c763 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -49,11 +48,6 @@ void __init sh73a0_register_twd(void) } #endif -static void __cpuinit sh73a0_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); @@ -110,14 +104,6 @@ static int sh73a0_cpu_kill(unsigned int cpu) static void sh73a0_cpu_die(unsigned int cpu) { - /* - * The ARM MPcore does not issue a cache coherency request for the L1 - * cache when powering off single CPUs. We must take care of this and - * further caches. - */ - dsb(); - flush_cache_all(); - /* Set power off mode. This takes the CPU out of the MP cluster */ scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF); @@ -134,7 +120,6 @@ static int sh73a0_cpu_disable(unsigned int cpu) struct smp_operations sh73a0_smp_ops __initdata = { .smp_init_cpus = sh73a0_smp_init_cpus, .smp_prepare_cpus = sh73a0_smp_prepare_cpus, - .smp_secondary_init = sh73a0_secondary_init, .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = sh73a0_cpu_kill, diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c index 47d83f7a70b6..5d92b5dd486b 100644 --- a/arch/arm/mach-shmobile/suspend.c +++ b/arch/arm/mach-shmobile/suspend.c @@ -12,6 +12,8 @@ #include <linux/suspend.h> #include <linux/module.h> #include <linux/err.h> +#include <linux/cpu.h> + #include <asm/io.h> #include <asm/system_misc.h> @@ -23,13 +25,13 @@ static int shmobile_suspend_default_enter(suspend_state_t suspend_state) static int shmobile_suspend_begin(suspend_state_t state) { - disable_hlt(); + cpu_idle_poll_ctrl(true); return 0; } static void shmobile_suspend_end(void) { - enable_hlt(); + cpu_idle_poll_ctrl(false); } struct platform_suspend_ops shmobile_suspend_ops = { diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 315edff610f2..572b8f719ffb 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -20,12 +20,23 @@ #ifndef __MACH_CORE_H #define __MACH_CORE_H +#define SOCFPGA_RSTMGR_CTRL 0x04 +#define SOCFPGA_RSTMGR_MODPERRST 0x14 +#define SOCFPGA_RSTMGR_BRGMODRST 0x1c + +/* System Manager bits */ +#define RSTMGR_CTRL_SWCOLDRSTREQ 0x1 /* Cold Reset */ +#define RSTMGR_CTRL_SWWARMRSTREQ 0x2 /* Warm Reset */ + extern void socfpga_secondary_startup(void); extern void __iomem *socfpga_scu_base_addr; extern void socfpga_init_clocks(void); extern void socfpga_sysmgr_init(void); +extern void __iomem *sys_manager_base_addr; +extern void __iomem *rst_manager_base_addr; + extern struct smp_operations socfpga_smp_ops; extern char secondary_trampoline, secondary_trampoline_end; diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 84c60fa8daa0..b51ce8c7929d 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> @@ -30,19 +29,6 @@ #include "core.h" -extern void __iomem *sys_manager_base_addr; -extern void __iomem *rst_manager_base_addr; - -static void __cpuinit socfpga_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; @@ -109,7 +95,6 @@ static void socfpga_cpu_die(unsigned int cpu) struct smp_operations socfpga_smp_ops __initdata = { .smp_init_cpus = socfpga_smp_init_cpus, .smp_prepare_cpus = socfpga_smp_prepare_cpus, - .smp_secondary_init = socfpga_secondary_init, .smp_boot_secondary = socfpga_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = socfpga_cpu_die, diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 1042c023cf24..46a051359f02 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -15,6 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/dw_apb_timer.h> +#include <linux/clk-provider.h> #include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -29,6 +30,7 @@ void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE)); void __iomem *sys_manager_base_addr; void __iomem *rst_manager_base_addr; +void __iomem *clk_mgr_base_addr; unsigned long cpu1start_addr; static struct map_desc scu_io_desc __initdata = { @@ -77,6 +79,9 @@ void __init socfpga_sysmgr_init(void) np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); rst_manager_base_addr = of_iomap(np, 0); + + np = of_find_compatible_node(NULL, NULL, "altr,clk-mgr"); + clk_mgr_base_addr = of_iomap(np, 0); } static void __init socfpga_init_irq(void) @@ -87,13 +92,22 @@ static void __init socfpga_init_irq(void) static void socfpga_cyclone5_restart(char mode, const char *cmd) { - /* TODO: */ + u32 temp; + + temp = readl(rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL); + + if (mode == 'h') + temp |= RSTMGR_CTRL_SWCOLDRSTREQ; + else + temp |= RSTMGR_CTRL_SWWARMRSTREQ; + writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL); } static void __init socfpga_cyclone5_init(void) { l2x0_of_init(0, ~0UL); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_clk_init(NULL); socfpga_init_clocks(); } diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig new file mode 100644 index 000000000000..442917eedff3 --- /dev/null +++ b/arch/arm/mach-spear/Kconfig @@ -0,0 +1,105 @@ +# +# SPEAr Platform configuration file +# + +menuconfig PLAT_SPEAR + bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 + default PLAT_SPEAR_SINGLE + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select HAVE_CLK + +if PLAT_SPEAR + +config ARCH_SPEAR13XX + bool "ST SPEAr13xx" + depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE + select ARCH_HAS_CPUFREQ + select ARM_GIC + select CPU_V7 + select GPIO_SPEAR_SPICS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL + select USE_OF + help + Supports for ARM's SPEAR13XX family + +if ARCH_SPEAR13XX + +config MACH_SPEAR1310 + bool "SPEAr1310 Machine support with Device Tree" + select PINCTRL_SPEAR1310 + help + Supports ST SPEAr1310 machine configured via the device-tree + +config MACH_SPEAR1340 + bool "SPEAr1340 Machine support with Device Tree" + select PINCTRL_SPEAR1340 + help + Supports ST SPEAr1340 machine configured via the device-tree + +endif #ARCH_SPEAR13XX + +config ARCH_SPEAR3XX + bool "ST SPEAr3xx" + depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on !ARCH_SPEAR13XX + select ARM_VIC + select CPU_ARM926T + select PINCTRL + select USE_OF + help + Supports for ARM's SPEAR3XX family + +if ARCH_SPEAR3XX + +config MACH_SPEAR300 + bool "SPEAr300 Machine support with Device Tree" + select PINCTRL_SPEAR300 + help + Supports ST SPEAr300 machine configured via the device-tree + +config MACH_SPEAR310 + bool "SPEAr310 Machine support with Device Tree" + select PINCTRL_SPEAR310 + help + Supports ST SPEAr310 machine configured via the device-tree + +config MACH_SPEAR320 + bool "SPEAr320 Machine support with Device Tree" + select PINCTRL_SPEAR320 + help + Supports ST SPEAr320 machine configured via the device-tree + +endif + +config ARCH_SPEAR6XX + bool "ST SPEAr6XX" + depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on !ARCH_SPEAR13XX + select ARM_VIC + select CPU_ARM926T + help + Supports for ARM's SPEAR6XX family + +config MACH_SPEAR600 + def_bool y + depends on ARCH_SPEAR6XX + select USE_OF + help + Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig" + +config ARCH_SPEAR_AUTO + def_bool PLAT_SPEAR_SINGLE + depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX + select ARCH_SPEAR3XX + +endif + diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile new file mode 100644 index 000000000000..af9bffb94f1c --- /dev/null +++ b/arch/arm/mach-spear/Makefile @@ -0,0 +1,26 @@ +# +# SPEAr Platform specific Makefile +# + +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include + +# Common support +obj-y := restart.o time.o + +obj-$(CONFIG_SMP) += headsmp.o platsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o +obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o +obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o + +obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o +obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o +obj-$(CONFIG_MACH_SPEAR300) += spear300.o +obj-$(CONFIG_MACH_SPEAR310) += spear310.o +obj-$(CONFIG_MACH_SPEAR320) += spear320.o + +obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx.o +obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o + +CFLAGS_hotplug.o += -march=armv7-a diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear/Makefile.boot index 4674a4c221db..4674a4c221db 100644 --- a/arch/arm/mach-spear13xx/Makefile.boot +++ b/arch/arm/mach-spear/Makefile.boot diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear/generic.h index 633e678e01a3..8ba7e75b648d 100644 --- a/arch/arm/mach-spear13xx/include/mach/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -1,9 +1,8 @@ /* - * arch/arm/mach-spear13xx/include/mach/generic.h + * spear machine family generic header file * - * spear13xx machine family generic header file - * - * Copyright (C) 2012 ST Microelectronics + * Copyright (C) 2009-2012 ST Microelectronics + * Rajeev Kumar <rajeev-dlh.kumar@st.com> * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public @@ -15,37 +14,46 @@ #define __MACH_GENERIC_H #include <linux/dmaengine.h> +#include <linux/amba/pl08x.h> +#include <linux/init.h> #include <asm/mach/time.h> -/* Add spear13xx structure declarations here */ extern void spear13xx_timer_init(void); +extern void spear3xx_timer_init(void); extern struct pl022_ssp_controller pl022_plat_data; +extern struct pl08x_platform_data pl080_plat_data; extern struct dw_dma_platform_data dmac_plat_data; extern struct dw_dma_slave cf_dma_priv; extern struct dw_dma_slave nand_read_dma_priv; extern struct dw_dma_slave nand_write_dma_priv; +bool dw_dma_filter(struct dma_chan *chan, void *slave); -/* Add spear13xx family function declarations here */ void __init spear_setup_of_timer(void); +void __init spear3xx_clk_init(void __iomem *misc_base, + void __iomem *soc_config_base); +void __init spear3xx_map_io(void); +void __init spear3xx_dt_init_irq(void); +void __init spear6xx_clk_init(void __iomem *misc_base); void __init spear13xx_map_io(void); void __init spear13xx_l2x0_init(void); -bool dw_dma_filter(struct dma_chan *chan, void *slave); + void spear_restart(char, const char *); + void spear13xx_secondary_startup(void); void __cpuinit spear13xx_cpu_die(unsigned int cpu); extern struct smp_operations spear13xx_smp_ops; #ifdef CONFIG_MACH_SPEAR1310 -void __init spear1310_clk_init(void); +void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base); #else -static inline void spear1310_clk_init(void) {} +static inline void spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base) {} #endif #ifdef CONFIG_MACH_SPEAR1340 -void __init spear1340_clk_init(void); +void __init spear1340_clk_init(void __iomem *misc_base); #else -static inline void spear1340_clk_init(void) {} +static inline void spear1340_clk_init(void __iomem *misc_base) {} #endif #endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear13xx/headsmp.S b/arch/arm/mach-spear/headsmp.S index ed85473a047f..ed85473a047f 100644 --- a/arch/arm/mach-spear13xx/headsmp.S +++ b/arch/arm/mach-spear/headsmp.S diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear/hotplug.c index a7d2dd11a4f2..d97749c642ce 100644 --- a/arch/arm/mach-spear13xx/hotplug.c +++ b/arch/arm/mach-spear/hotplug.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/smp_plat.h> @@ -21,7 +20,6 @@ static inline void cpu_enter_lowpower(void) { unsigned int v; - flush_cache_all(); asm volatile( " mcr p15, 0, %1, c7, c5, 0\n" " dsb\n" diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/mach-spear/include/mach/debug-macro.S index 75b05ad0fbad..75b05ad0fbad 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/mach-spear/include/mach/debug-macro.S diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h index 37a5c411a866..92da0a8c6bce 100644 --- a/arch/arm/mach-spear6xx/include/mach/irqs.h +++ b/arch/arm/mach-spear/include/mach/irqs.h @@ -1,10 +1,9 @@ /* - * arch/arm/mach-spear6xx/include/mach/irqs.h + * IRQ helper macros for spear machine family * - * IRQ helper macros for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Rajeev Kumar <rajeev-dlh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -14,6 +13,11 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H +#ifdef CONFIG_ARCH_SPEAR3XX +#define NR_IRQS 256 +#endif + +#ifdef CONFIG_ARCH_SPEAR6XX /* IRQ definitions */ /* VIC 1 */ #define IRQ_VIC_END 64 @@ -21,5 +25,11 @@ /* GPIO pins virtual irqs */ #define VIRTUAL_IRQS 24 #define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) +#endif + +#ifdef CONFIG_ARCH_SPEAR13XX +#define IRQ_GIC_END 160 +#define NR_IRQS IRQ_GIC_END +#endif -#endif /* __MACH_IRQS_H */ +#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear/include/mach/misc_regs.h index 6309bf68d6f8..935639ce59ba 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear/include/mach/misc_regs.h @@ -16,7 +16,7 @@ #include <mach/spear.h> -#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE) +#define MISC_BASE (VA_SPEAR_ICM3_MISC_REG_BASE) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h new file mode 100644 index 000000000000..374ddc393df1 --- /dev/null +++ b/arch/arm/mach-spear/include/mach/spear.h @@ -0,0 +1,95 @@ +/* + * SPEAr3xx/6xx Machine family specific definition + * + * Copyright (C) 2009,2012 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SPEAR_H +#define __MACH_SPEAR_H + +#include <asm/memory.h> + +#if defined(CONFIG_ARCH_SPEAR3XX) || defined (CONFIG_ARCH_SPEAR6XX) + +/* ICM1 - Low speed connection */ +#define SPEAR_ICM1_2_BASE UL(0xD0000000) +#define VA_SPEAR_ICM1_2_BASE IOMEM(0xFD000000) +#define SPEAR_ICM1_UART_BASE UL(0xD0000000) +#define VA_SPEAR_ICM1_UART_BASE (VA_SPEAR_ICM1_2_BASE - SPEAR_ICM1_2_BASE + SPEAR_ICM1_UART_BASE) +#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000) + +/* ML-1, 2 - Multi Layer CPU Subsystem */ +#define SPEAR_ICM3_ML1_2_BASE UL(0xF0000000) +#define VA_SPEAR6XX_ML_CPU_BASE IOMEM(0xF0000000) + +/* ICM3 - Basic Subsystem */ +#define SPEAR_ICM3_SMI_CTRL_BASE UL(0xFC000000) +#define VA_SPEAR_ICM3_SMI_CTRL_BASE IOMEM(0xFC000000) +#define SPEAR_ICM3_DMA_BASE UL(0xFC400000) +#define SPEAR_ICM3_SYS_CTRL_BASE UL(0xFCA00000) +#define VA_SPEAR_ICM3_SYS_CTRL_BASE (VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_SYS_CTRL_BASE) +#define SPEAR_ICM3_MISC_REG_BASE UL(0xFCA80000) +#define VA_SPEAR_ICM3_MISC_REG_BASE (VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_MISC_REG_BASE) + +/* Debug uart for linux, will be used for debug and uncompress messages */ +#define SPEAR_DBG_UART_BASE SPEAR_ICM1_UART_BASE +#define VA_SPEAR_DBG_UART_BASE VA_SPEAR_ICM1_UART_BASE + +/* Sysctl base for spear platform */ +#define SPEAR_SYS_CTRL_BASE SPEAR_ICM3_SYS_CTRL_BASE +#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR_ICM3_SYS_CTRL_BASE +#endif /* SPEAR3xx || SPEAR6XX */ + +/* SPEAr320 Macros */ +#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) +#define VA_SPEAR320_SOC_CONFIG_BASE IOMEM(0xFE000000) + +#ifdef CONFIG_ARCH_SPEAR13XX + +#define PERIP_GRP2_BASE UL(0xB3000000) +#define VA_PERIP_GRP2_BASE IOMEM(0xFE000000) +#define MCIF_SDHCI_BASE UL(0xB3000000) +#define SYSRAM0_BASE UL(0xB3800000) +#define VA_SYSRAM0_BASE IOMEM(0xFE800000) +#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600) + +#define PERIP_GRP1_BASE UL(0xE0000000) +#define VA_PERIP_GRP1_BASE IOMEM(0xFD000000) +#define UART_BASE UL(0xE0000000) +#define VA_UART_BASE IOMEM(0xFD000000) +#define SSP_BASE UL(0xE0100000) +#define MISC_BASE UL(0xE0700000) +#define VA_MISC_BASE IOMEM(0xFD700000) + +#define A9SM_AND_MPMC_BASE UL(0xEC000000) +#define VA_A9SM_AND_MPMC_BASE IOMEM(0xFC000000) + +#define SPEAR1310_RAS_BASE UL(0xD8400000) +#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) + +/* A9SM peripheral offsets */ +#define A9SM_PERIP_BASE UL(0xEC800000) +#define VA_A9SM_PERIP_BASE IOMEM(0xFC800000) +#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00) + +#define L2CC_BASE UL(0xED000000) +#define VA_L2CC_BASE IOMEM(UL(0xFB000000)) + +/* others */ +#define DMAC0_BASE UL(0xEA800000) +#define DMAC1_BASE UL(0xEB000000) +#define MCIF_CF_BASE UL(0xB2800000) + +/* Debug uart for linux, will be used for debug and uncompress messages */ +#define SPEAR_DBG_UART_BASE UART_BASE +#define VA_SPEAR_DBG_UART_BASE VA_UART_BASE + +#endif /* SPEAR13XX */ + +#endif /* __MACH_SPEAR_H */ diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/mach-spear/include/mach/timex.h index ef95e5b780bd..ef95e5b780bd 100644 --- a/arch/arm/plat-spear/include/plat/timex.h +++ b/arch/arm/mach-spear/include/mach/timex.h diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h index 51b2dc93e4da..51b2dc93e4da 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/mach-spear/include/mach/uncompress.h diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/mach-spear/pl080.c index cfa1199d0f4a..cfa1199d0f4a 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/mach-spear/pl080.c diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/mach-spear/pl080.h index eb6590ded40d..eb6590ded40d 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/mach-spear/pl080.h diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear/platsmp.c index af4ade61cd95..9c4c722c954e 100644 --- a/arch/arm/mach-spear13xx/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -15,11 +15,10 @@ #include <linux/jiffies.h> #include <linux/io.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> #include <mach/spear.h> -#include <mach/generic.h> +#include "generic.h" static DEFINE_SPINLOCK(boot_lock); @@ -28,13 +27,6 @@ static void __iomem *scu_base = IOMEM(VA_SCU_BASE); static void __cpuinit spear13xx_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/mach-spear/restart.c index 7d4616d5df11..2b44500bb718 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/mach-spear/restart.c @@ -14,7 +14,7 @@ #include <linux/amba/sp810.h> #include <asm/system_misc.h> #include <mach/spear.h> -#include <mach/generic.h> +#include "generic.h" #define SPEAR13XX_SYS_SW_RES (VA_MISC_BASE + 0x204) void spear_restart(char mode, const char *cmd) @@ -26,7 +26,8 @@ void spear_restart(char mode, const char *cmd) /* hardware reset, Use on-chip reset capability */ #ifdef CONFIG_ARCH_SPEAR13XX writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES); -#else +#endif +#if defined(CONFIG_ARCH_SPEAR3XX) || defined(CONFIG_ARCH_SPEAR6XX) sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE); #endif } diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear/spear1310.c index 56214d1076ef..ed3b5c287a7b 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear/spear1310.c @@ -19,7 +19,7 @@ #include <linux/pata_arasan_cf_data.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/generic.h> +#include "generic.h" #include <mach/spear.h> /* Base addresses */ @@ -30,8 +30,6 @@ #define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000) #define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000) -#define SPEAR1310_RAS_BASE UL(0xD8400000) -#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) static struct arasan_cf_pdata cf_pdata = { .cf_if_clk = CF_IF_CLK_166M, diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear/spear1340.c index 9a28beb2a113..75e38644bbfb 100644 --- a/arch/arm/mach-spear13xx/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -20,10 +20,11 @@ #include <linux/of_platform.h> #include <linux/irqchip.h> #include <asm/mach/arch.h> -#include <mach/dma.h> -#include <mach/generic.h> +#include "generic.h" #include <mach/spear.h> +#include "spear13xx-dma.h" + /* Base addresses */ #define SPEAR1340_SATA_BASE UL(0xB1000000) #define SPEAR1340_UART1_BASE UL(0xB4100000) diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear/spear13xx-dma.h index d50bdb605925..d50bdb605925 100644 --- a/arch/arm/mach-spear13xx/include/mach/dma.h +++ b/arch/arm/mach-spear/spear13xx-dma.h diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 25a10191b021..6dd208997176 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -21,10 +21,11 @@ #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include <mach/dma.h> -#include <mach/generic.h> +#include "generic.h" #include <mach/spear.h> +#include "spear13xx-dma.h" + /* common dw_dma filter routine to be used by peripherals */ bool dw_dma_filter(struct dma_chan *chan, void *slave) { @@ -145,9 +146,9 @@ void __init spear13xx_map_io(void) static void __init spear13xx_clk_init(void) { if (of_machine_is_compatible("st,spear1310")) - spear1310_clk_init(); + spear1310_clk_init(VA_MISC_BASE, VA_SPEAR1310_RAS_BASE); else if (of_machine_is_compatible("st,spear1340")) - spear1340_clk_init(); + spear1340_clk_init(VA_MISC_BASE); else pr_err("%s: Unknown machine\n", __func__); } diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear/spear300.c index bbc9b7e9c62c..bac56e845f7a 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear/spear300.c @@ -17,7 +17,7 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <mach/generic.h> +#include "generic.h" #include <mach/spear.h> /* DMAC platform data's slave info */ @@ -185,7 +185,7 @@ struct pl08x_channel_data spear300_dma_info[] = { static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, &pl022_plat_data), - OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL, &pl080_plat_data), {} }; diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear/spear310.c index c13a434a8195..6ffbc63d516d 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear/spear310.c @@ -18,7 +18,7 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <mach/generic.h> +#include "generic.h" #include <mach/spear.h> #define SPEAR310_UART1_BASE UL(0xB2000000) @@ -217,7 +217,7 @@ static struct amba_pl011_data spear310_uart_data[] = { static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, &pl022_plat_data), - OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL, &pl080_plat_data), OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL, &spear310_uart_data[0]), diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear/spear320.c index e1c77079a3e5..6eb3eec65f96 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear/spear320.c @@ -19,7 +19,8 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <mach/generic.h> +#include <asm/mach/map.h> +#include "generic.h" #include <mach/spear.h> #define SPEAR320_UART1_BASE UL(0xA3000000) @@ -222,7 +223,7 @@ static struct amba_pl011_data spear320_uart_data[] = { static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, &pl022_plat_data), - OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL, &pl080_plat_data), OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL, &spear320_ssp_data[0]), @@ -253,7 +254,7 @@ static const char * const spear320_dt_board_compat[] = { struct map_desc spear320_io_desc[] __initdata = { { - .virtual = VA_SPEAR320_SOC_CONFIG_BASE, + .virtual = (unsigned long)VA_SPEAR320_SOC_CONFIG_BASE, .pfn = __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE), .length = SZ_16M, .type = MT_DEVICE diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear/spear3xx.c index d2b3937c4014..0227c97797cd 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear/spear3xx.c @@ -15,10 +15,13 @@ #include <linux/amba/pl022.h> #include <linux/amba/pl080.h> +#include <linux/clk.h> #include <linux/io.h> -#include <plat/pl080.h> -#include <mach/generic.h> +#include <asm/mach/map.h> +#include "pl080.h" +#include "generic.h" #include <mach/spear.h> +#include <mach/misc_regs.h> /* ssp device registration */ struct pl022_ssp_controller pl022_plat_data = { @@ -65,13 +68,13 @@ struct pl08x_platform_data pl080_plat_data = { */ struct map_desc spear3xx_io_desc[] __initdata = { { - .virtual = VA_SPEAR3XX_ICM1_2_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE), + .virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE), .length = SZ_16M, .type = MT_DEVICE }, { - .virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE), + .virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE), .length = SZ_16M, .type = MT_DEVICE }, @@ -88,7 +91,7 @@ void __init spear3xx_timer_init(void) char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; - spear3xx_clk_init(); + spear3xx_clk_init(MISC_BASE, VA_SPEAR320_SOC_CONFIG_BASE); /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear/spear6xx.c index 8904d8a52d84..ec8eefbbdfad 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear/spear6xx.c @@ -24,9 +24,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <plat/pl080.h> -#include <mach/generic.h> +#include "pl080.h" +#include "generic.h" #include <mach/spear.h> +#include <mach/misc_regs.h> /* dmac device registration */ static struct pl08x_channel_data spear600_dma_info[] = { @@ -321,7 +322,7 @@ static struct pl08x_channel_data spear600_dma_info[] = { }, }; -struct pl08x_platform_data pl080_plat_data = { +static struct pl08x_platform_data spear6xx_pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", .cctl_memcpy = @@ -350,18 +351,18 @@ struct pl08x_platform_data pl080_plat_data = { */ struct map_desc spear6xx_io_desc[] __initdata = { { - .virtual = VA_SPEAR6XX_ML_CPU_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ML_CPU_BASE), + .virtual = (unsigned long)VA_SPEAR6XX_ML_CPU_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM3_ML1_2_BASE), .length = 2 * SZ_16M, .type = MT_DEVICE }, { - .virtual = VA_SPEAR6XX_ICM1_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM1_BASE), + .virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE), .length = SZ_16M, .type = MT_DEVICE }, { - .virtual = VA_SPEAR6XX_ICM3_SMI_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE), + .virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE), .length = SZ_16M, .type = MT_DEVICE }, @@ -378,7 +379,7 @@ void __init spear6xx_timer_init(void) char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; - spear6xx_clk_init(); + spear6xx_clk_init(MISC_BASE); /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); @@ -404,8 +405,8 @@ void __init spear6xx_timer_init(void) /* Add auxdata to pass platform data */ struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL, - &pl080_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL, + &spear6xx_pl080_plat_data), {} }; diff --git a/arch/arm/plat-spear/time.c b/arch/arm/mach-spear/time.c index bd5c53cd6962..d449673e40f7 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -23,7 +23,7 @@ #include <linux/time.h> #include <linux/irq.h> #include <asm/mach/time.h> -#include <mach/generic.h> +#include "generic.h" /* * We would use TIMER0 and TIMER1 as clockevent and clocksource. diff --git a/arch/arm/mach-spear13xx/Kconfig b/arch/arm/mach-spear13xx/Kconfig deleted file mode 100644 index eaadc66d96b3..000000000000 --- a/arch/arm/mach-spear13xx/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -# -# SPEAr13XX Machine configuration file -# - -if ARCH_SPEAR13XX - -menu "SPEAr13xx Implementations" -config MACH_SPEAR1310 - bool "SPEAr1310 Machine support with Device Tree" - select PINCTRL_SPEAR1310 - help - Supports ST SPEAr1310 machine configured via the device-tree - -config MACH_SPEAR1340 - bool "SPEAr1340 Machine support with Device Tree" - select PINCTRL_SPEAR1340 - help - Supports ST SPEAr1340 machine configured via the device-tree -endmenu -endif #ARCH_SPEAR13XX diff --git a/arch/arm/mach-spear13xx/Makefile b/arch/arm/mach-spear13xx/Makefile deleted file mode 100644 index 3435ea78c15d..000000000000 --- a/arch/arm/mach-spear13xx/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Makefile for SPEAr13XX machine series -# - -obj-$(CONFIG_SMP) += headsmp.o platsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o - -obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o -obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o -obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S deleted file mode 100644 index 9e3ae6bfe50d..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/debug-macro.S - * - * Debugging macro include header spear13xx machine family - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear13xx/include/mach/hardware.h b/arch/arm/mach-spear13xx/include/mach/hardware.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/hardware.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h deleted file mode 100644 index 271a62b4cd31..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/irqs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/irqs.h - * - * IRQ helper macros for spear13xx machine family - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define IRQ_GIC_END 160 -#define NR_IRQS IRQ_GIC_END - -#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h deleted file mode 100644 index 7cfa6818865a..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/spear.h - * - * spear13xx Machine family specific definition - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SPEAR13XX_H -#define __MACH_SPEAR13XX_H - -#include <asm/memory.h> - -#define PERIP_GRP2_BASE UL(0xB3000000) -#define VA_PERIP_GRP2_BASE IOMEM(0xFE000000) -#define MCIF_SDHCI_BASE UL(0xB3000000) -#define SYSRAM0_BASE UL(0xB3800000) -#define VA_SYSRAM0_BASE IOMEM(0xFE800000) -#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600) - -#define PERIP_GRP1_BASE UL(0xE0000000) -#define VA_PERIP_GRP1_BASE IOMEM(0xFD000000) -#define UART_BASE UL(0xE0000000) -#define VA_UART_BASE IOMEM(0xFD000000) -#define SSP_BASE UL(0xE0100000) -#define MISC_BASE UL(0xE0700000) -#define VA_MISC_BASE IOMEM(0xFD700000) - -#define A9SM_AND_MPMC_BASE UL(0xEC000000) -#define VA_A9SM_AND_MPMC_BASE IOMEM(0xFC000000) - -/* A9SM peripheral offsets */ -#define A9SM_PERIP_BASE UL(0xEC800000) -#define VA_A9SM_PERIP_BASE IOMEM(0xFC800000) -#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00) - -#define L2CC_BASE UL(0xED000000) -#define VA_L2CC_BASE IOMEM(UL(0xFB000000)) - -/* others */ -#define DMAC0_BASE UL(0xEA800000) -#define DMAC1_BASE UL(0xEB000000) -#define MCIF_CF_BASE UL(0xB2800000) - -/* Debug uart for linux, will be used for debug and uncompress messages */ -#define SPEAR_DBG_UART_BASE UART_BASE -#define VA_SPEAR_DBG_UART_BASE VA_UART_BASE - -#endif /* __MACH_SPEAR13XX_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h deleted file mode 100644 index 3a58b8284a6a..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/timex.h - * - * SPEAr3XX machine family specific timex definitions - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -#include <plat/timex.h> - -#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h deleted file mode 100644 index 70fe72f05dea..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/uncompress.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_UNCOMPRESS_H -#define __MACH_UNCOMPRESS_H - -#include <plat/uncompress.h> - -#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig deleted file mode 100644 index 8bd37291fa4f..000000000000 --- a/arch/arm/mach-spear3xx/Kconfig +++ /dev/null @@ -1,26 +0,0 @@ -# -# SPEAr3XX Machine configuration file -# - -if ARCH_SPEAR3XX - -menu "SPEAr3xx Implementations" -config MACH_SPEAR300 - bool "SPEAr300 Machine support with Device Tree" - select PINCTRL_SPEAR300 - help - Supports ST SPEAr300 machine configured via the device-tree - -config MACH_SPEAR310 - bool "SPEAr310 Machine support with Device Tree" - select PINCTRL_SPEAR310 - help - Supports ST SPEAr310 machine configured via the device-tree - -config MACH_SPEAR320 - bool "SPEAr320 Machine support with Device Tree" - select PINCTRL_SPEAR320 - help - Supports ST SPEAr320 machine configured via the device-tree -endmenu -endif #ARCH_SPEAR3XX diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile deleted file mode 100644 index 8d12faa178fd..000000000000 --- a/arch/arm/mach-spear3xx/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Makefile for SPEAr3XX machine series -# - -# common files -obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o - -# spear300 specific files -obj-$(CONFIG_MACH_SPEAR300) += spear300.o - -# spear310 specific files -obj-$(CONFIG_MACH_SPEAR310) += spear310.o - -# spear320 specific files -obj-$(CONFIG_MACH_SPEAR320) += spear320.o diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot deleted file mode 100644 index 4674a4c221db..000000000000 --- a/arch/arm/mach-spear3xx/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S deleted file mode 100644 index 0a6381fad5d9..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/debug-macro.S - * - * Debugging macro include header spear3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h deleted file mode 100644 index df310799e416..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-spear3xx/generic.h - * - * SPEAr3XX machine family generic header file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_GENERIC_H -#define __MACH_GENERIC_H - -#include <linux/amba/pl08x.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -/* Add spear3xx family device structure declarations here */ -extern void spear3xx_timer_init(void); -extern struct pl022_ssp_controller pl022_plat_data; -extern struct pl08x_platform_data pl080_plat_data; - -/* Add spear3xx family function declarations here */ -void __init spear_setup_of_timer(void); -void __init spear3xx_clk_init(void); -void __init spear3xx_map_io(void); - -void spear_restart(char, const char *); - -#endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/hardware.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h deleted file mode 100644 index f95e5b2b6686..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/irqs.h - * - * IRQ helper macros for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define NR_IRQS 256 - -#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h deleted file mode 100644 index 8cca95193d4d..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear.h - * - * SPEAr3xx Machine family specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SPEAR3XX_H -#define __MACH_SPEAR3XX_H - -#include <asm/memory.h> - -/* ICM1 - Low speed connection */ -#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000) -#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000) -#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000) -#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE) -#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000) - -/* ML1 - Multi Layer CPU Subsystem */ -#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000) -#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) - -/* ICM3 - Basic Subsystem */ -#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE) -#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE) - -/* Debug uart for linux, will be used for debug and uncompress messages */ -#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE -#define VA_SPEAR_DBG_UART_BASE VA_SPEAR3XX_ICM1_UART_BASE - -/* Sysctl base for spear platform */ -#define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE -#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE - -/* SPEAr320 Macros */ -#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) -#define VA_SPEAR320_SOC_CONFIG_BASE UL(0xFE000000) -#define SPEAR320_CONTROL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE) -#define SPEAR320_EXT_CTRL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018) - #define SPEAR320_UARTX_PCLK_MASK 0x1 - #define SPEAR320_UART2_PCLK_SHIFT 8 - #define SPEAR320_UART3_PCLK_SHIFT 9 - #define SPEAR320_UART4_PCLK_SHIFT 10 - #define SPEAR320_UART5_PCLK_SHIFT 11 - #define SPEAR320_UART6_PCLK_SHIFT 12 - #define SPEAR320_RS485_PCLK_SHIFT 13 - -#endif /* __MACH_SPEAR3XX_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h deleted file mode 100644 index 9f5d08bd0c44..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/timex.h - * - * SPEAr3XX machine family specific timex definitions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -#include <plat/timex.h> - -#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h deleted file mode 100644 index b909b011f7c8..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/uncompress.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_UNCOMPRESS_H -#define __MACH_UNCOMPRESS_H - -#include <plat/uncompress.h> - -#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig deleted file mode 100644 index 339f397dea70..000000000000 --- a/arch/arm/mach-spear6xx/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -# -# SPEAr6XX Machine configuration file -# - -config MACH_SPEAR600 - def_bool y - depends on ARCH_SPEAR6XX - select USE_OF - help - Supports ST SPEAr600 boards configured via the device-tree diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile deleted file mode 100644 index 898831d93f37..000000000000 --- a/arch/arm/mach-spear6xx/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for SPEAr6XX machine series -# - -# common files -obj-y += spear6xx.o diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot deleted file mode 100644 index 4674a4c221db..000000000000 --- a/arch/arm/mach-spear6xx/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear6xx/include/mach/debug-macro.S b/arch/arm/mach-spear6xx/include/mach/debug-macro.S deleted file mode 100644 index 0f3ea39edd96..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/debug-macro.S +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/debug-macro.S - * - * Debugging macro include header for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h deleted file mode 100644 index 65514b159370..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/generic.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/generic.h - * - * SPEAr6XX machine family specific generic header file - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_GENERIC_H -#define __MACH_GENERIC_H - -#include <linux/init.h> - -void __init spear_setup_of_timer(void); -void spear_restart(char, const char *); -void __init spear6xx_clk_init(void); - -#endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/hardware.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h deleted file mode 100644 index c34acc201d34..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/misc_regs.h - * - * Miscellaneous registers definitions for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_MISC_REGS_H -#define __MACH_MISC_REGS_H - -#include <mach/spear.h> - -#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE) -#define DMA_CHN_CFG (MISC_BASE + 0x0A0) - -#endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h deleted file mode 100644 index cb8ed2f4dc85..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/spear.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/spear.h - * - * SPEAr6xx Machine family specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SPEAR6XX_H -#define __MACH_SPEAR6XX_H - -#include <asm/memory.h> - -/* ICM1 - Low speed connection */ -#define SPEAR6XX_ICM1_BASE UL(0xD0000000) -#define VA_SPEAR6XX_ICM1_BASE UL(0xFD000000) -#define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000) -#define VA_SPEAR6XX_ICM1_UART0_BASE (VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE) - -/* ML-1, 2 - Multi Layer CPU Subsystem */ -#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000) -#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) - -/* ICM3 - Basic Subsystem */ -#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE) -#define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR6XX_ICM3_MISC_REG_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE) - -/* Debug uart for linux, will be used for debug and uncompress messages */ -#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE -#define VA_SPEAR_DBG_UART_BASE VA_SPEAR6XX_ICM1_UART0_BASE - -/* Sysctl base for spear platform */ -#define SPEAR_SYS_CTRL_BASE SPEAR6XX_ICM3_SYS_CTRL_BASE -#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR6XX_ICM3_SYS_CTRL_BASE - -#endif /* __MACH_SPEAR6XX_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/timex.h b/arch/arm/mach-spear6xx/include/mach/timex.h deleted file mode 100644 index ac1c5b005695..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/timex.h - * - * SPEAr6XX machine family specific timex definitions - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -#include <plat/timex.h> - -#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/uncompress.h b/arch/arm/mach-spear6xx/include/mach/uncompress.h deleted file mode 100644 index 77f0765e21e1..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/uncompress.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_UNCOMPRESS_H -#define __MACH_UNCOMPRESS_H - -#include <plat/uncompress.h> - -#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 8709a39bd34c..d259c782d742 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,10 +1,11 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 select CLKSRC_MMIO + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select PINCTRL select SPARSE_IRQ - select SUNXI_TIMER - select PINCTRL_SUNXI
\ No newline at end of file + select SUN4I_TIMER + select PINCTRL_SUNXI diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 23afb732cb40..706ce35396b8 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -10,63 +10,77 @@ * warranty of any kind, whether express or implied. */ +#include <linux/clocksource.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/io.h> -#include <linux/sunxi_timer.h> -#include <linux/irqchip/sunxi.h> +#include <linux/clk/sunxi.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include "sunxi.h" -#define WATCHDOG_CTRL_REG 0x00 -#define WATCHDOG_CTRL_RESTART (1 << 0) -#define WATCHDOG_MODE_REG 0x04 -#define WATCHDOG_MODE_ENABLE (1 << 0) -#define WATCHDOG_MODE_RESET_ENABLE (1 << 1) +#define SUN4I_WATCHDOG_CTRL_REG 0x00 +#define SUN4I_WATCHDOG_CTRL_RESTART (1 << 0) +#define SUN4I_WATCHDOG_MODE_REG 0x04 +#define SUN4I_WATCHDOG_MODE_ENABLE (1 << 0) +#define SUN4I_WATCHDOG_MODE_RESET_ENABLE (1 << 1) static void __iomem *wdt_base; -static void sunxi_setup_restart(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "allwinner,sunxi-wdt"); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_base = of_iomap(np, 0); - WARN(!wdt_base, "failed to map watchdog base address"); -} - -static void sunxi_restart(char mode, const char *cmd) +static void sun4i_restart(char mode, const char *cmd) { if (!wdt_base) return; /* Enable timer and set reset bit in the watchdog */ - writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE, - wdt_base + WATCHDOG_MODE_REG); + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); /* * Restart the watchdog. The default (and lowest) interval * value for the watchdog is 0.5s. */ - writel(WATCHDOG_CTRL_RESTART, wdt_base + WATCHDOG_CTRL_REG); + writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); while (1) { mdelay(5); - writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE, - wdt_base + WATCHDOG_MODE_REG); + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); } } +static struct of_device_id sunxi_restart_ids[] = { + { .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart }, + { /*sentinel*/ } +}; + +static void sunxi_setup_restart(void) +{ + const struct of_device_id *of_id; + struct device_node *np; + + np = of_find_matching_node(NULL, sunxi_restart_ids); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_base = of_iomap(np, 0); + WARN(!wdt_base, "failed to map watchdog base address"); + + of_id = of_match_node(sunxi_restart_ids, np); + WARN(!of_id, "restart function not available"); + + arm_pm_restart = of_id->data; +} + static struct map_desc sunxi_io_desc[] __initdata = { { .virtual = (unsigned long) SUNXI_REGS_VIRT_BASE, @@ -81,6 +95,12 @@ void __init sunxi_map_io(void) iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc)); } +static void __init sunxi_timer_init(void) +{ + sunxi_init_clocks(); + clocksource_of_init(); +} + static void __init sunxi_dt_init(void) { sunxi_setup_restart(); @@ -97,9 +117,7 @@ static const char * const sunxi_board_dt_compat[] = { DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") .init_machine = sunxi_dt_init, .map_io = sunxi_map_io, - .init_irq = sunxi_init_irq, - .handle_irq = sunxi_handle_irq, - .restart = sunxi_restart, - .init_time = &sunxi_timer_init, + .init_irq = irqchip_init, + .init_time = sunxi_timer_init, .dt_compat = sunxi_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index d1c4893894ce..20c3b372cdf5 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,13 +1,30 @@ -if ARCH_TEGRA +config ARCH_TEGRA + bool "NVIDIA Tegra" if ARCH_MULTI_V7 + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CLKSRC_OF + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_CLK + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + select SOC_BUS + select SPARSE_IRQ + select USE_OF + help + This enables support for NVIDIA Tegra based systems. -comment "NVIDIA Tegra options" +menu "NVIDIA Tegra options" + depends on ARCH_TEGRA config ARCH_TEGRA_2x_SOC bool "Enable support for Tegra20 family" select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP select ARM_ERRATA_720789 - select ARM_ERRATA_742230 if SMP - select ARM_ERRATA_751472 select ARM_ERRATA_754327 if SMP select ARM_ERRATA_764369 if SMP select ARM_GIC @@ -18,16 +35,14 @@ config ARCH_TEGRA_2x_SOC select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller config ARCH_TEGRA_3x_SOC bool "Enable support for Tegra30 family" - select ARM_ERRATA_743622 - select ARM_ERRATA_751472 select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC @@ -37,8 +52,8 @@ config ARCH_TEGRA_3x_SOC select PINCTRL_TEGRA30 select PL310_ERRATA_769419 if CACHE_L2X0 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -71,4 +86,4 @@ config TEGRA_AHB config TEGRA_EMC_SCALING_ENABLE bool "Enable scaling the memory frequency" -endif +endmenu diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index e40326d0e29f..d011f0ad49c4 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,3 +1,5 @@ +asflags-y += -march=armv7-a + obj-y += common.o obj-y += io.o obj-y += irq.o @@ -25,7 +27,6 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o endif obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot deleted file mode 100644 index 29433816233c..000000000000 --- a/arch/arm/mach-tegra/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000 -params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 -initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 60431de585ca..1787327fae3a 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -40,6 +40,7 @@ int tegra_clk_debugfs_init(void); static inline int tegra_clk_debugfs_init(void) { return 0; } #endif +int __init tegra_powergate_init(void); #if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS) int __init tegra_powergate_debugfs_init(void); #else diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index eb1f3c8c74cc..9f852c6fe5b9 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -27,8 +27,6 @@ #include <asm/hardware/cache-l2x0.h> -#include <mach/powergate.h> - #include "board.h" #include "common.h" #include "fuse.h" diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 32f8eb3fe344..5900cc44f780 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -2,4 +2,3 @@ extern struct smp_operations tegra_smp_ops; extern int tegra_cpu_kill(unsigned int cpu); extern void tegra_cpu_die(unsigned int cpu); -extern int tegra_cpu_disable(unsigned int cpu); diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c deleted file mode 100644 index e3d6e15ff188..000000000000 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * arch/arm/mach-tegra/cpu-tegra.c - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/suspend.h> - -/* Frequency table index must be sequential starting at 0 */ -static struct cpufreq_frequency_table freq_table[] = { - { 0, 216000 }, - { 1, 312000 }, - { 2, 456000 }, - { 3, 608000 }, - { 4, 760000 }, - { 5, 816000 }, - { 6, 912000 }, - { 7, 1000000 }, - { 8, CPUFREQ_TABLE_END }, -}; - -#define NUM_CPUS 2 - -static struct clk *cpu_clk; -static struct clk *pll_x_clk; -static struct clk *pll_p_clk; -static struct clk *emc_clk; - -static unsigned long target_cpu_speed[NUM_CPUS]; -static DEFINE_MUTEX(tegra_cpu_lock); -static bool is_suspended; - -static int tegra_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - -static unsigned int tegra_getspeed(unsigned int cpu) -{ - unsigned long rate; - - if (cpu >= NUM_CPUS) - return 0; - - rate = clk_get_rate(cpu_clk) / 1000; - return rate; -} - -static int tegra_cpu_clk_set_rate(unsigned long rate) -{ - int ret; - - /* - * Take an extra reference to the main pll so it doesn't turn - * off when we move the cpu off of it - */ - clk_prepare_enable(pll_x_clk); - - ret = clk_set_parent(cpu_clk, pll_p_clk); - if (ret) { - pr_err("Failed to switch cpu to clock pll_p\n"); - goto out; - } - - if (rate == clk_get_rate(pll_p_clk)) - goto out; - - ret = clk_set_rate(pll_x_clk, rate); - if (ret) { - pr_err("Failed to change pll_x to %lu\n", rate); - goto out; - } - - ret = clk_set_parent(cpu_clk, pll_x_clk); - if (ret) { - pr_err("Failed to switch cpu to clock pll_x\n"); - goto out; - } - -out: - clk_disable_unprepare(pll_x_clk); - return ret; -} - -static int tegra_update_cpu_speed(unsigned long rate) -{ - int ret = 0; - struct cpufreq_freqs freqs; - - freqs.old = tegra_getspeed(0); - freqs.new = rate; - - if (freqs.old == freqs.new) - return ret; - - /* - * Vote on memory bus frequency based on cpu frequency - * This sets the minimum frequency, display or avp may request higher - */ - if (rate >= 816000) - clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */ - else if (rate >= 456000) - clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */ - else - clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */ - - for_each_online_cpu(freqs.cpu) - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - -#ifdef CONFIG_CPU_FREQ_DEBUG - printk(KERN_DEBUG "cpufreq-tegra: transition: %u --> %u\n", - freqs.old, freqs.new); -#endif - - ret = tegra_cpu_clk_set_rate(freqs.new * 1000); - if (ret) { - pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n", - freqs.new); - return ret; - } - - for_each_online_cpu(freqs.cpu) - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static unsigned long tegra_cpu_highest_speed(void) -{ - unsigned long rate = 0; - int i; - - for_each_online_cpu(i) - rate = max(rate, target_cpu_speed[i]); - return rate; -} - -static int tegra_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int idx; - unsigned int freq; - int ret = 0; - - mutex_lock(&tegra_cpu_lock); - - if (is_suspended) { - ret = -EBUSY; - goto out; - } - - cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &idx); - - freq = freq_table[idx].frequency; - - target_cpu_speed[policy->cpu] = freq; - - ret = tegra_update_cpu_speed(tegra_cpu_highest_speed()); - -out: - mutex_unlock(&tegra_cpu_lock); - return ret; -} - -static int tegra_pm_notify(struct notifier_block *nb, unsigned long event, - void *dummy) -{ - mutex_lock(&tegra_cpu_lock); - if (event == PM_SUSPEND_PREPARE) { - is_suspended = true; - pr_info("Tegra cpufreq suspend: setting frequency to %d kHz\n", - freq_table[0].frequency); - tegra_update_cpu_speed(freq_table[0].frequency); - } else if (event == PM_POST_SUSPEND) { - is_suspended = false; - } - mutex_unlock(&tegra_cpu_lock); - - return NOTIFY_OK; -} - -static struct notifier_block tegra_cpu_pm_notifier = { - .notifier_call = tegra_pm_notify, -}; - -static int tegra_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu >= NUM_CPUS) - return -EINVAL; - - clk_prepare_enable(emc_clk); - clk_prepare_enable(cpu_clk); - - cpufreq_frequency_table_cpuinfo(policy, freq_table); - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - policy->cur = tegra_getspeed(policy->cpu); - target_cpu_speed[policy->cpu] = policy->cur; - - /* FIXME: what's the actual transition time? */ - policy->cpuinfo.transition_latency = 300 * 1000; - - cpumask_copy(policy->cpus, cpu_possible_mask); - - if (policy->cpu == 0) - register_pm_notifier(&tegra_cpu_pm_notifier); - - return 0; -} - -static int tegra_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_cpuinfo(policy, freq_table); - clk_disable_unprepare(emc_clk); - return 0; -} - -static struct freq_attr *tegra_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver tegra_cpufreq_driver = { - .verify = tegra_verify_speed, - .target = tegra_target, - .get = tegra_getspeed, - .init = tegra_cpu_init, - .exit = tegra_cpu_exit, - .name = "tegra", - .attr = tegra_cpufreq_attr, -}; - -static int __init tegra_cpufreq_init(void) -{ - cpu_clk = clk_get_sys(NULL, "cpu"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - pll_x_clk = clk_get_sys(NULL, "pll_x"); - if (IS_ERR(pll_x_clk)) - return PTR_ERR(pll_x_clk); - - pll_p_clk = clk_get_sys(NULL, "pll_p_cclk"); - if (IS_ERR(pll_p_clk)) - return PTR_ERR(pll_p_clk); - - emc_clk = clk_get_sys("cpu", "emc"); - if (IS_ERR(emc_clk)) { - clk_put(cpu_clk); - return PTR_ERR(emc_clk); - } - - return cpufreq_register_driver(&tegra_cpufreq_driver); -} - -static void __exit tegra_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&tegra_cpufreq_driver); - clk_put(emc_clk); - clk_put(cpu_clk); -} - - -MODULE_AUTHOR("Colin Cross <ccross@android.com>"); -MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2"); -MODULE_LICENSE("GPL"); -module_init(tegra_cpufreq_init); -module_exit(tegra_cpufreq_exit); diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index 0f4e8c483b34..1d1c6023f4a2 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -23,39 +23,13 @@ static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .state_count = 1, .states = { [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), }, }; -static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); - int __init tegra114_cpuidle_init(void) { - int ret; - unsigned int cpu; - struct cpuidle_device *dev; - struct cpuidle_driver *drv = &tegra_idle_driver; - - ret = cpuidle_register_driver(&tegra_idle_driver); - if (ret) { - pr_err("CPUidle driver registration failed\n"); - return ret; - } - - for_each_possible_cpu(cpu) { - dev = &per_cpu(tegra_idle_device, cpu); - dev->cpu = cpu; - - dev->state_count = drv->state_count; - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("CPU%u: CPUidle device registration failed\n", - cpu); - return ret; - } - } - return 0; + return cpuidle_register(&tegra_idle_driver, NULL); } diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 8bbbdebed882..0cdba8de8c77 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -43,32 +43,33 @@ static atomic_t abort_barrier; static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); +#define TEGRA20_MAX_STATES 2 +#else +#define TEGRA20_MAX_STATES 1 #endif -static struct cpuidle_state tegra_idle_states[] = { - [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), -#ifdef CONFIG_PM_SLEEP - [1] = { - .enter = tegra20_idle_lp2_coupled, - .exit_latency = 5000, - .target_residency = 10000, - .power_usage = 0, - .flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_COUPLED, - .name = "powered-down", - .desc = "CPU power gated", - }, -#endif -}; - static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, + .states = { + ARM_CPUIDLE_WFI_STATE_PWR(600), +#ifdef CONFIG_PM_SLEEP + { + .enter = tegra20_idle_lp2_coupled, + .exit_latency = 5000, + .target_residency = 10000, + .power_usage = 0, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_COUPLED, + .name = "powered-down", + .desc = "CPU power gated", + }, +#endif + }, + .state_count = TEGRA20_MAX_STATES, + .safe_state_index = 0, }; -static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); - #ifdef CONFIG_PM_SLEEP #ifdef CONFIG_SMP static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); @@ -213,39 +214,8 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, int __init tegra20_cpuidle_init(void) { - int ret; - unsigned int cpu; - struct cpuidle_device *dev; - struct cpuidle_driver *drv = &tegra_idle_driver; - #ifdef CONFIG_PM_SLEEP tegra_tear_down_cpu = tegra20_tear_down_cpu; #endif - - drv->state_count = ARRAY_SIZE(tegra_idle_states); - memcpy(drv->states, tegra_idle_states, - drv->state_count * sizeof(drv->states[0])); - - ret = cpuidle_register_driver(&tegra_idle_driver); - if (ret) { - pr_err("CPUidle driver registration failed\n"); - return ret; - } - - for_each_possible_cpu(cpu) { - dev = &per_cpu(tegra_idle_device, cpu); - dev->cpu = cpu; -#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED - dev->coupled_cpus = *cpu_possible_mask; -#endif - - dev->state_count = drv->state_count; - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("CPU%u: CPUidle device registration failed\n", - cpu); - return ret; - } - } - return 0; + return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); } diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index c0931c8bb3e5..3cf9aca5f3ea 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -43,7 +43,6 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev, static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, #ifdef CONFIG_PM_SLEEP .state_count = 2, #else @@ -65,8 +64,6 @@ static struct cpuidle_driver tegra_idle_driver = { }, }; -static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); - #ifdef CONFIG_PM_SLEEP static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, @@ -149,32 +146,8 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev, int __init tegra30_cpuidle_init(void) { - int ret; - unsigned int cpu; - struct cpuidle_device *dev; - struct cpuidle_driver *drv = &tegra_idle_driver; - #ifdef CONFIG_PM_SLEEP tegra_tear_down_cpu = tegra30_tear_down_cpu; #endif - - ret = cpuidle_register_driver(&tegra_idle_driver); - if (ret) { - pr_err("CPUidle driver registration failed\n"); - return ret; - } - - for_each_possible_cpu(cpu) { - dev = &per_cpu(tegra_idle_device, cpu); - dev->cpu = cpu; - - dev->state_count = drv->state_count; - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("CPU%u: CPUidle device registration failed\n", - cpu); - return ret; - } - } - return 0; + return cpuidle_register(&tegra_idle_driver, NULL); } diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index 8da9f78475da..184914a68d73 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -11,7 +11,6 @@ #include <linux/smp.h> #include <linux/clk/tegra.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> #include "fuse.h" @@ -47,15 +46,6 @@ void __ref tegra_cpu_die(unsigned int cpu) BUG(); } -int tegra_cpu_disable(unsigned int cpu) -{ - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; -} - void __init tegra_hotplug_init(void) { if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h deleted file mode 100644 index 06763fe7529d..000000000000 --- a/arch/arm/mach-tegra/include/mach/powergate.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * drivers/regulator/tegra-regulator.c - * - * Copyright (c) 2010 Google, Inc - * - * Author: - * Colin Cross <ccross@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _MACH_TEGRA_POWERGATE_H_ -#define _MACH_TEGRA_POWERGATE_H_ - -struct clk; - -#define TEGRA_POWERGATE_CPU 0 -#define TEGRA_POWERGATE_3D 1 -#define TEGRA_POWERGATE_VENC 2 -#define TEGRA_POWERGATE_PCIE 3 -#define TEGRA_POWERGATE_VDEC 4 -#define TEGRA_POWERGATE_L2 5 -#define TEGRA_POWERGATE_MPE 6 -#define TEGRA_POWERGATE_HEG 7 -#define TEGRA_POWERGATE_SATA 8 -#define TEGRA_POWERGATE_CPU1 9 -#define TEGRA_POWERGATE_CPU2 10 -#define TEGRA_POWERGATE_CPU3 11 -#define TEGRA_POWERGATE_CELP 12 -#define TEGRA_POWERGATE_3D1 13 - -#define TEGRA_POWERGATE_CPU0 TEGRA_POWERGATE_CPU -#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D - -int __init tegra_powergate_init(void); - -int tegra_cpu_powergate_id(int cpuid); -int tegra_powergate_is_powered(int id); -int tegra_powergate_power_on(int id); -int tegra_powergate_power_off(int id); -int tegra_powergate_remove_clamping(int id); - -/* Must be called with clk disabled, and returns with clk enabled */ -int tegra_powergate_sequence_power_up(int id, struct clk *clk); - -#endif /* _MACH_TEGRA_POWERGATE_H_ */ diff --git a/arch/arm/mach-tegra/include/mach/timex.h b/arch/arm/mach-tegra/include/mach/timex.h deleted file mode 100644 index a44ccbdb7dbf..000000000000 --- a/arch/arm/mach-tegra/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/timex.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_TIMEX_H -#define __MACH_TEGRA_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h deleted file mode 100644 index 08386418196f..000000000000 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/uncompress.h - * - * Copyright (C) 2010 Google, Inc. - * Copyright (C) 2011 Google, Inc. - * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * Doug Anderson <dianders@chromium.org> - * Stephen Warren <swarren@nvidia.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_UNCOMPRESS_H -#define __MACH_TEGRA_UNCOMPRESS_H - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include "../../iomap.h" - -#define BIT(x) (1 << (x)) -#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) - -#define DEBUG_UART_SHIFT 2 - -volatile u8 *uart; - -static void putc(int c) -{ - if (uart == NULL) - return; - - while (!(uart[UART_LSR << DEBUG_UART_SHIFT] & UART_LSR_THRE)) - barrier(); - uart[UART_TX << DEBUG_UART_SHIFT] = c; -} - -static inline void flush(void) -{ -} - -static const struct { - u32 base; - u32 reset_reg; - u32 clock_reg; - u32 bit; -} uarts[] = { - { - TEGRA_UARTA_BASE, - TEGRA_CLK_RESET_BASE + 0x04, - TEGRA_CLK_RESET_BASE + 0x10, - 6, - }, - { - TEGRA_UARTB_BASE, - TEGRA_CLK_RESET_BASE + 0x04, - TEGRA_CLK_RESET_BASE + 0x10, - 7, - }, - { - TEGRA_UARTC_BASE, - TEGRA_CLK_RESET_BASE + 0x08, - TEGRA_CLK_RESET_BASE + 0x14, - 23, - }, - { - TEGRA_UARTD_BASE, - TEGRA_CLK_RESET_BASE + 0x0c, - TEGRA_CLK_RESET_BASE + 0x18, - 1, - }, - { - TEGRA_UARTE_BASE, - TEGRA_CLK_RESET_BASE + 0x0c, - TEGRA_CLK_RESET_BASE + 0x18, - 2, - }, -}; - -static inline bool uart_clocked(int i) -{ - if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit)) - return false; - - if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit))) - return false; - - return true; -} - -#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA -int auto_odmdata(void) -{ - volatile u32 *pmc = (volatile u32 *)TEGRA_PMC_BASE; - u32 odmdata = pmc[0xa0 / 4]; - - /* - * Bits 19:18 are the console type: 0=default, 1=none, 2==DCC, 3==UART - * Some boards apparently swap the last two values, but we don't have - * any way of catering for that here, so we just accept either. If this - * doesn't make sense for your board, just don't enable this feature. - * - * Bits 17:15 indicate the UART to use, 0/1/2/3/4 are UART A/B/C/D/E. - */ - - switch ((odmdata >> 18) & 3) { - case 2: - case 3: - break; - default: - return -1; - } - - return (odmdata >> 15) & 7; -} -#endif - -/* - * Setup before decompression. This is where we do UART selection for - * earlyprintk and init the uart_base register. - */ -static inline void arch_decomp_setup(void) -{ - int uart_id; - volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE; - u32 chip, div; - -#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) - uart_id = auto_odmdata(); -#elif defined(CONFIG_TEGRA_DEBUG_UARTA) - uart_id = 0; -#elif defined(CONFIG_TEGRA_DEBUG_UARTB) - uart_id = 1; -#elif defined(CONFIG_TEGRA_DEBUG_UARTC) - uart_id = 2; -#elif defined(CONFIG_TEGRA_DEBUG_UARTD) - uart_id = 3; -#elif defined(CONFIG_TEGRA_DEBUG_UARTE) - uart_id = 4; -#endif - - if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) || - !uart_clocked(uart_id)) - uart = NULL; - else - uart = (volatile u8 *)uarts[uart_id].base; - - if (uart == NULL) - return; - - chip = (apb_misc[0x804 / 4] >> 8) & 0xff; - if (chip == 0x20) - div = 0x0075; - else - div = 0x00dd; - - uart[UART_LCR << DEBUG_UART_SHIFT] |= UART_LCR_DLAB; - uart[UART_DLL << DEBUG_UART_SHIFT] = div & 0xff; - uart[UART_DLM << DEBUG_UART_SHIFT] = div >> 8; - uart[UART_LCR << DEBUG_UART_SHIFT] = 3; -} - -#endif diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index b60165f1ca02..46144a19a7e7 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -34,12 +34,11 @@ #include <linux/delay.h> #include <linux/export.h> #include <linux/clk/tegra.h> +#include <linux/tegra-powergate.h> #include <asm/sizes.h> #include <asm/mach/pci.h> -#include <mach/powergate.h> - #include "board.h" #include "iomap.h" diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 516aab28fe34..fad4226ef710 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -18,7 +18,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <linux/clk/tegra.h> #include <asm/cacheflush.h> @@ -38,13 +37,6 @@ static cpumask_t tegra_cpu_init_mask; static void __cpuinit tegra_secondary_init(unsigned int cpu) { - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } @@ -181,6 +173,5 @@ struct smp_operations tegra_smp_ops __initdata = { #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = tegra_cpu_kill, .cpu_die = tegra_cpu_die, - .cpu_disable = tegra_cpu_disable, #endif }; diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index d0b7400e4606..45cf52c7e528 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -123,14 +123,14 @@ bool tegra_set_cpu_in_lp2(int phy_cpu_id) return last_cpu; } -static int tegra_sleep_cpu(unsigned long v2p) +int tegra_cpu_do_idle(void) { - /* Switch to the identity mapping. */ - cpu_switch_mm(idmap_pgd, &init_mm); - - /* Flush the TLB. */ - local_flush_tlb_all(); + return cpu_do_idle(); +} +static int tegra_sleep_cpu(unsigned long v2p) +{ + setup_mm_for_reboot(); tegra_sleep_cpu_finish(v2p); /* should never here */ diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 9d2d038bf12e..778a4aa7c3fa 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -39,7 +39,7 @@ enum tegra_suspend_mode tegra_pm_validate_suspend_mode( enum tegra_suspend_mode mode); void tegra_init_suspend(void); #else -enum tegra_suspend_mode tegra_pm_validate_suspend_mode( +static inline enum tegra_suspend_mode tegra_pm_validate_suspend_mode( enum tegra_suspend_mode mode) { return TEGRA_SUSPEND_NONE; diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index c6bc8f85759c..f076f0f80fcd 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -22,13 +22,13 @@ #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/io.h> #include <linux/seq_file.h> #include <linux/spinlock.h> #include <linux/clk/tegra.h> - -#include <mach/powergate.h> +#include <linux/tegra-powergate.h> #include "fuse.h" #include "iomap.h" @@ -75,7 +75,7 @@ static int tegra_powergate_set(int id, bool new_state) if (status == new_state) { spin_unlock_irqrestore(&tegra_powergate_lock, flags); - return -EINVAL; + return 0; } pmc_write(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE); @@ -168,6 +168,7 @@ err_clk: err_power: return ret; } +EXPORT_SYMBOL(tegra_powergate_sequence_power_up); int tegra_cpu_powergate_id(int cpuid) { diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 1676aba5e7b8..e6de88a2ea06 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -44,6 +44,7 @@ ENTRY(tegra_resume) cpu_id r0 cmp r0, #0 @ CPU0? + THUMB( it ne ) bne cpu_resume @ no #ifdef CONFIG_ARCH_TEGRA_3x_SOC diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 9f6bfafdd512..e3f2417c420e 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -197,7 +197,7 @@ ENTRY(tegra20_sleep_cpu_secondary_finish) mov r3, #CPU_RESETTABLE str r3, [r0] - bl cpu_do_idle + bl tegra_cpu_do_idle /* * cpu may be reset while in wfi, which will return through diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 63a15bd9b653..d29dfcce948d 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -66,7 +66,9 @@ ENTRY(tegra30_cpu_shutdown) FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \ FLOW_CTRL_CSR_ENABLE mov r4, #(1 << 4) - orr r12, r12, r4, lsl r3 + ARM( orr r12, r12, r4, lsl r3 ) + THUMB( lsl r4, r4, r3 ) + THUMB( orr r12, r12, r4 ) str r12, [r1] /* Halt this CPU. */ diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 970ebd5138b9..2080fb12ce26 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -92,7 +92,7 @@ #ifdef CONFIG_CACHE_L2X0 .macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs - adr \tmp1, \phys_l2x0_saved_regs + W(adr) \tmp1, \phys_l2x0_saved_regs ldr \tmp1, [\tmp1] ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE] ldr \tmp3, [\tmp2, #L2X0_CTRL] diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 61749e2d8111..0d1e4128d460 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -31,8 +31,6 @@ #include <linux/pda_power.h> #include <linux/platform_data/tegra_usb.h> #include <linux/io.h> -#include <linux/i2c.h> -#include <linux/i2c-tegra.h> #include <linux/slab.h> #include <linux/sys_soc.h> #include <linux/usb/tegra_usb_phy.h> diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 1e49d901f2c9..0320495efc4d 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -95,7 +95,7 @@ #define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) /* Fast UART1 on U335 only */ -#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) +#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000) /* * SLOW peripherals diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 3e5bbd0e5b23..f66d7deae46d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,3 +1,19 @@ +config ARCH_U8500 + bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 + depends on MMU + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select CLKDEV_LOOKUP + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + help + Support for ST-Ericsson's Ux500 architecture + if ARCH_U8500 config UX500_SOC_COMMON diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index f24710dfc395..bf9b6be5b180 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -3,7 +3,7 @@ # obj-y := cpu.o devices.o devices-common.o \ - id.o usb.o timer.o + id.o usb.o timer.o pm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o @@ -15,3 +15,5 @@ obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +CFLAGS_hotplug.o += -march=armv7-a diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 7209db7cdc72..aba9e5692958 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -10,10 +10,9 @@ #include <linux/platform_data/pinctrl-nomadik.h> #include <linux/platform_data/dma-ste-dma40.h> -#include <mach/devices.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/msp.h> +#include "devices.h" +#include "irqs.h" +#include <linux/platform_data/asoc-ux500-msp.h> #include "ste-dma40-db8500.h" #include "board-mop500.h" diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 152ae38cd18c..947bd9eca079 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -13,8 +13,6 @@ #include <asm/mach-types.h> -#include <mach/hardware.h> - #include "pins-db8500.h" #include "board-mop500.h" diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 2a17bc506cff..33c353bc1c4a 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -5,6 +5,7 @@ * * Authors: Sundar Iyer <sundar.iyer@stericsson.com> * Bengt Jonsson <bengt.g.jonsson@stericsson.com> + * Daniel Willerud <daniel.willerud@stericsson.com> * * MOP500 board specific initialization for regulators */ @@ -12,6 +13,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> #include "board-mop500-regulators.h" +#include "id.h" static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), @@ -28,6 +30,20 @@ struct regulator_init_data gpio_en_3v3_regulator = { .consumer_supplies = gpio_en_3v3_consumers, }; +static struct regulator_consumer_supply sdi0_reg_consumers[] = { + REGULATOR_SUPPLY("vqmmc", "sdi0"), +}; + +struct regulator_init_data sdi0_reg_init_data = { + .constraints = { + .min_uV = 1800000, + .max_uV = 2900000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdi0_reg_consumers), + .consumer_supplies = sdi0_reg_consumers, +}; + /* * TPS61052 regulator */ @@ -53,21 +69,37 @@ struct regulator_init_data tps61052_regulator = { }; static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { - /* External displays, connector on board 2v5 power supply */ - REGULATOR_SUPPLY("vaux12v5", "mcde.0"), + /* Main display, u8500 R3 uib */ + REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), + /* Main display, u8500 uib and ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), + /* Secondary display, ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), /* SFH7741 proximity sensor */ REGULATOR_SUPPLY("vcc", "gpio-keys.0"), /* BH1780GLS ambient light sensor */ REGULATOR_SUPPLY("vcc", "2-0029"), /* lsm303dlh accelerometer */ - REGULATOR_SUPPLY("vdd", "3-0018"), + REGULATOR_SUPPLY("vdd", "2-0018"), + /* lsm303dlhc accelerometer */ + REGULATOR_SUPPLY("vdd", "2-0019"), /* lsm303dlh magnetometer */ - REGULATOR_SUPPLY("vdd", "3-001e"), + REGULATOR_SUPPLY("vdd", "2-001e"), /* Rohm BU21013 Touchscreen devices */ REGULATOR_SUPPLY("avdd", "3-005c"), REGULATOR_SUPPLY("avdd", "3-005d"), /* Synaptics RMI4 Touchscreen device */ REGULATOR_SUPPLY("vdd", "3-004b"), + /* L3G4200D Gyroscope device */ + REGULATOR_SUPPLY("vdd", "2-0068"), + /* Ambient light sensor device */ + REGULATOR_SUPPLY("vdd", "3-0029"), + /* Pressure sensor device */ + REGULATOR_SUPPLY("vdd", "2-005c"), + /* Cypress TrueTouch Touchscreen device */ + REGULATOR_SUPPLY("vcpin", "spi8.0"), + /* Camera device */ + REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), }; static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { @@ -75,18 +107,50 @@ static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { REGULATOR_SUPPLY("vmmc", "sdi4"), /* AB8500 audio codec */ REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), + /* AB8500 accessory detect 1 */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), + /* AV8100 HDMI device */ + REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), }; static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { + REGULATOR_SUPPLY("v-SD-STM", "stm"), /* External MMC slot power */ REGULATOR_SUPPLY("vmmc", "sdi0"), }; +static struct regulator_consumer_supply ab8505_vaux4_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux5_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux6_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux8_consumers[] = { + /* AB8500 audio codec device */ + REGULATOR_SUPPLY("v-aux8", NULL), +}; + +static struct regulator_consumer_supply ab8505_vadc_consumers[] = { + /* Internal general-purpose ADC */ + REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), +}; + static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { /* TV-out DENC supply */ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), /* Internal general-purpose ADC */ REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), }; static struct regulator_consumer_supply ab8500_vaud_consumers[] = { @@ -114,77 +178,90 @@ static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { REGULATOR_SUPPLY("v-intcore", NULL), /* USB Transceiver */ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), + /* Handled by abx500 clk driver */ + REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), +}; + +static struct regulator_consumer_supply ab8505_usb_consumers[] = { + /* HS USB OTG physical interface */ + REGULATOR_SUPPLY("v-ape", NULL), }; static struct regulator_consumer_supply ab8500_vana_consumers[] = { - /* External displays, connector on board, 1v8 power supply */ - REGULATOR_SUPPLY("vsmps2", "mcde.0"), + /* DB8500 DSI */ + REGULATOR_SUPPLY("vdddsi1v2", "mcde"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), + /* DB8500 CSI */ + REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), }; /* ab8500 regulator register initialization */ -struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { +static struct ab8500_regulator_reg_init ab8500_reg_init[] = { /* * VanaRequestCtrl = HP/LP depending on VxRequest * VextSupply1RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), /* * VextSupply2RequestCtrl = HP/LP depending on VxRequest * VextSupply3RequestCtrl = HP/LP depending on VxRequest * Vaux1RequestCtrl = HP/LP depending on VxRequest * Vaux2RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), /* * Vaux3RequestCtrl = HP/LP depending on VxRequest * SwHPReq = Control through SWValid disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), /* * VanaSysClkReq1HPValid = disabled * Vaux1SysClkReq1HPValid = disabled * Vaux2SysClkReq1HPValid = disabled * Vaux3SysClkReq1HPValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), /* * VextSupply1SysClkReq1HPValid = disabled * VextSupply2SysClkReq1HPValid = disabled * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), /* * VanaHwHPReq1Valid = disabled * Vaux1HwHPreq1Valid = disabled * Vaux2HwHPReq1Valid = disabled * Vaux3HwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq1Valid = disabled * VextSupply2HwHPReq1Valid = disabled * VextSupply3HwHPReq1Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), /* * VanaHwHPReq2Valid = disabled * Vaux1HwHPReq2Valid = disabled * Vaux2HwHPReq2Valid = disabled * Vaux3HwHPReq2Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq2Valid = disabled * VextSupply2HwHPReq2Valid = disabled * VextSupply3HwHPReq2Valid = HWReq2 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), /* * VanaSwHPReqValid = disabled * Vaux1SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), /* * Vaux2SwHPReqValid = disabled * Vaux3SwHPReqValid = disabled @@ -192,7 +269,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VextSupply2SwHPReqValid = disabled * VextSupply3SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), /* * SysClkReq2Valid1 = SysClkReq2 controlled * SysClkReq3Valid1 = disabled @@ -202,7 +279,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid1 = disabled * SysClkReq8Valid1 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), /* * SysClkReq2Valid2 = disabled * SysClkReq3Valid2 = disabled @@ -212,7 +289,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid2 = disabled * SysClkReq8Valid2 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), /* * VTVoutEna = disabled * Vintcore12Ena = disabled @@ -220,66 +297,62 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * Vintcore12LP = inactive (HP) * VTVoutLP = inactive (HP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10), + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), /* * VaudioEna = disabled * VdmicEna = disabled * Vamic1Ena = disabled * Vamic2Ena = disabled */ - INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), /* * Vamic1_dzout = high-Z when Vamic1 is disabled * Vamic2_dzout = high-Z when Vamic2 is disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), /* - * VPll = Hw controlled + * VPll = Hw controlled (NOTE! PRCMU bits) * VanaRegu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02), + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), /* * VrefDDREna = disabled * VrefDDRSleepMode = inactive (no pulldown) */ - INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), /* - * VextSupply1Regu = HW control - * VextSupply2Regu = HW control - * VextSupply3Regu = HW control + * VextSupply1Regu = force LP + * VextSupply2Regu = force OFF + * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 */ - INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), /* * Vaux1Regu = force HP * Vaux2Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), - /* - * Vaux3regu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), /* - * Vsmps1 = 1.15V + * Vaux3Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), /* - * Vaux1Sel = 2.5 V + * Vaux1Sel = 2.8 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08), + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), /* * Vaux2Sel = 2.9 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d), + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), /* * Vaux3Sel = 2.91 V */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), /* * VextSupply12LP = disabled (no LP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), /* * Vaux1Disch = short discharge time * Vaux2Disch = short discharge time @@ -288,33 +361,26 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VTVoutDisch = short discharge time * VaudioDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), /* * VanaDisch = short discharge time * VdmicPullDownEna = pulldown disabled when Vdmic is disabled * VdmicDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), }; /* AB8500 regulators */ -struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { +static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { .constraints = { .name = "V-DISPLAY", - .min_uV = 2500000, - .max_uV = 2900000, + .min_uV = 2800000, + .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, .boot_on = 1, /* display is on at boot */ - /* - * This voltage cannot be disabled right now because - * it is somehow affecting the external MMC - * functionality, though that typically will use - * AUX3. - */ - .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, @@ -326,7 +392,10 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), .consumer_supplies = ab8500_vaux2_consumers, @@ -338,7 +407,10 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), .consumer_supplies = ab8500_vaux3_consumers, @@ -392,18 +464,614 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { [AB8500_LDO_INTCORE] = { .constraints = { .name = "V-INTCORE", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), .consumer_supplies = ab8500_vintcore_consumers, }, - /* supply for U8500 CSI/DSI, VANA LDO */ + /* supply for U8500 CSI-DSI, VANA LDO */ [AB8500_LDO_ANA] = { .constraints = { - .name = "V-CSI/DSI", + .name = "V-CSI-DSI", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), .consumer_supplies = ab8500_vana_consumers, }, }; + +/* supply for VextSupply3 */ +static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { + /* SIM supply for 3 V SIM cards */ + REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), +}; + +/* extended configuration for VextSupply2, only used for HREFP_V20 boards */ +static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = { + .hwreq = true, +}; + +/* + * AB8500 external regulators + */ +static struct regulator_init_data ab8500_ext_regulators[] = { + /* fixed Vbat supplies VSMPS1_EXT_1V8 */ + [AB8500_EXT_SUPPLY1] = { + .constraints = { + .name = "ab8500-ext-supply1", + .min_uV = 1800000, + .max_uV = 1800000, + .initial_mode = REGULATOR_MODE_IDLE, + .boot_on = 1, + .always_on = 1, + }, + }, + /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */ + [AB8500_EXT_SUPPLY2] = { + .constraints = { + .name = "ab8500-ext-supply2", + .min_uV = 1360000, + .max_uV = 1360000, + }, + }, + /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */ + [AB8500_EXT_SUPPLY3] = { + .constraints = { + .name = "ab8500-ext-supply3", + .min_uV = 3400000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = + ARRAY_SIZE(ab8500_ext_supply3_consumers), + .consumer_supplies = ab8500_ext_supply3_consumers, + }, +}; + +/* ab8505 regulator register initialization */ +static struct ab8500_regulator_reg_init ab8505_reg_init[] = { + /* + * VarmRequestCtrl + * VsmpsCRequestCtrl + * VsmpsARequestCtrl + * VsmpsBRequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00), + /* + * VsafeRequestCtrl + * VpllRequestCtrl + * VanaRequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00), + /* + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00), + /* + * VsmpsASysClkReq1HPValid + * VsmpsBSysClkReq1HPValid + * VsafeSysClkReq1HPValid + * VanaSysClkReq1HPValid = disabled + * VpllSysClkReq1HPValid + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), + /* + * VsmpsCSysClkReq1HPValid + * VarmSysClkReq1HPValid + * VbbSysClkReq1HPValid + * VsmpsMSysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq1Valid + * VsmpsBHwHPReq1Valid + * VsafeHwHPReq1Valid + * VanaHwHPReq1Valid = disabled + * VpllHwHPReq1Valid + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq1Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq2Valid + * VsmpsBHwHPReq2Valid + * VsafeHwHPReq2Valid + * VanaHwHPReq2Valid = disabled + * VpllHwHPReq2Valid + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq2Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00), + /** + * VsmpsCSwHPReqValid + * VarmSwHPReqValid + * VsmpsASwHPReqValid + * VsmpsBSwHPReqValid + * VsafeSwHPReqValid + * VanaSwHPReqValid + * VanaSwHPReqValid = disabled + * VpllSwHPReqValid + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VsmpsMSwHPReqValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00), + /* + * Vaux4SwHPReqValid + * Vaux4HwHPReq2Valid + * Vaux4HwHPReq1Valid + * Vaux4SysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00), + /* + * VadcEna = disabled + * VintCore12Ena = disabled + * VintCore12Sel = 1.25 V + * VintCore12LP = inactive (HP) + * VadcLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10), + /* + * VaudioEna = disabled + * Vaux8Ena = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00), + /* + * VsmpsARegu + * VsmpsASelCtrl + * VsmpsAAutoMode + * VsmpsAPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00), + /* + * VsmpsBRegu + * VsmpsBSelCtrl + * VsmpsBAutoMode + * VsmpsBPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00), + /* + * VsafeRegu + * VsafeSelCtrl + * VsafeAutoMode + * VsafePWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00), + /* + * VPll = Hw controlled (NOTE! PRCMU bits) + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02), + /* + * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0) + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01), + /* + * Vaux3Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00), + /* + * VsmpsASel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00), + /* + * VsmpsASel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00), + /* + * VsmpsASel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00), + /* + * VsmpsBSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00), + /* + * VsmpsBSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00), + /* + * VsmpsBSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00), + /* + * VsafeSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00), + /* + * VsafeSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00), + /* + * VsafeSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00), + /* + * Vaux1Sel = 2.8 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07), + /* + * Vaux4RequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00), + /* + * Vaux4Regu + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00), + /* + * Vaux4Sel + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00), + /* + * VanaDisch = short discharge time + * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled + * Vaux8Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00), + /* + * Vaux4Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00), + /* + * Vaux5Sel + * Vaux5LP + * Vaux5Ena + * Vaux5Disch + * Vaux5DisSfst + * Vaux5DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00), + /* + * Vaux6Sel + * Vaux6LP + * Vaux6Ena + * Vaux6DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00), +}; + +struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { + /* supplies to the display/camera */ + [AB8505_LDO_AUX1] = { + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* display is on at boot */ + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), + .consumer_supplies = ab8500_vaux1_consumers, + }, + /* supplies to the on-board eMMC */ + [AB8505_LDO_AUX2] = { + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), + .consumer_supplies = ab8500_vaux2_consumers, + }, + /* supply for VAUX3, supplies to SDcard slots */ + [AB8505_LDO_AUX3] = { + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), + .consumer_supplies = ab8500_vaux3_consumers, + }, + /* supply for VAUX4, supplies to NFC and standalone secure element */ + [AB8505_LDO_AUX4] = { + .constraints = { + .name = "V-NFC-SE", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers), + .consumer_supplies = ab8505_vaux4_consumers, + }, + /* supply for VAUX5, supplies to TBD */ + [AB8505_LDO_AUX5] = { + .constraints = { + .name = "V-AUX5", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers), + .consumer_supplies = ab8505_vaux5_consumers, + }, + /* supply for VAUX6, supplies to TBD */ + [AB8505_LDO_AUX6] = { + .constraints = { + .name = "V-AUX6", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers), + .consumer_supplies = ab8505_vaux6_consumers, + }, + /* supply for gpadc, ADC LDO */ + [AB8505_LDO_ADC] = { + .constraints = { + .name = "V-ADC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers), + .consumer_supplies = ab8505_vadc_consumers, + }, + /* supply for ab8500-vaudio, VAUDIO LDO */ + [AB8505_LDO_AUDIO] = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, + }, + /* supply for v-anamic1 VAMic1-LDO */ + [AB8505_LDO_ANAMIC1] = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, + }, + /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ + [AB8505_LDO_ANAMIC2] = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, + }, + /* supply for v-aux8, VAUX8 LDO */ + [AB8505_LDO_AUX8] = { + .constraints = { + .name = "V-AUX8", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers), + .consumer_supplies = ab8505_vaux8_consumers, + }, + /* supply for v-intcore12, VINTCORE12 LDO */ + [AB8505_LDO_INTCORE] = { + .constraints = { + .name = "V-INTCORE", + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), + .consumer_supplies = ab8500_vintcore_consumers, + }, + /* supply for LDO USB */ + [AB8505_LDO_USB] = { + .constraints = { + .name = "V-USB", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers), + .consumer_supplies = ab8505_usb_consumers, + }, + /* supply for U8500 CSI-DSI, VANA LDO */ + [AB8505_LDO_ANA] = { + .constraints = { + .name = "V-CSI-DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), + .consumer_supplies = ab8500_vana_consumers, + }, +}; + +struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { + .reg_init = ab8500_reg_init, + .num_reg_init = ARRAY_SIZE(ab8500_reg_init), + .regulator = ab8500_regulators, + .num_regulator = ARRAY_SIZE(ab8500_regulators), + .ext_regulator = ab8500_ext_regulators, + .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), +}; + +/* Use the AB8500 init settings for AB8505 as they are the same right now */ +struct ab8500_regulator_platform_data ab8505_regulator_plat_data = { + .reg_init = ab8505_reg_init, + .num_reg_init = ARRAY_SIZE(ab8505_reg_init), + .regulator = ab8505_regulators, + .num_regulator = ARRAY_SIZE(ab8505_regulators), +}; + +static void ab8500_modify_reg_init(int id, u8 mask, u8 value) +{ + int i; + + if (cpu_is_u8520()) { + for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) { + if (ab8505_reg_init[i].id == id) { + u8 initval = ab8505_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8505_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8505_reg_init[i].mask); + return; + } + } + } else { + for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { + if (ab8500_reg_init[i].id == id) { + u8 initval = ab8500_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8500_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8500_reg_init[i].mask); + return; + } + } + } + + BUG_ON(1); +} + +void mop500_regulator_init(void) +{ + struct regulator_init_data *regulator; + + /* + * Temporarily turn on Vaux2 on 8520 machine + */ + if (cpu_is_u8520()) { + /* Vaux2 initialized to be on */ + ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05); + } + + /* + * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for + * all HREFP_V20 boards) + */ + if (cpu_is_u8500v20()) { + /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */ + ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01); + + /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */ + ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2, + 0x20, 0x20); + + /* VextSupply2 = force HP at initialization */ + ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04); + + /* enable VextSupply2 during platform active */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.always_on = 1; + + /* disable VextSupply2 in suspend */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.state_mem.disabled = 1; + regulator->constraints.state_standby.disabled = 1; + + /* enable VextSupply2 HW control (used in suspend) */ + regulator->driver_data = (void *)&ab8500_ext_supply2; + } +} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 78a0642a2206..039f5132c370 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -14,10 +14,12 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> -extern struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; -extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; +extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; +extern struct regulator_init_data sdi0_reg_init_data; + +void mop500_regulator_init(void); #endif diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 051b62c27102..0ef38775a0c1 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -14,9 +14,9 @@ #include <linux/platform_data/dma-ste-dma40.h> #include <asm/mach-types.h> -#include <mach/devices.h> -#include <mach/hardware.h> +#include "devices.h" +#include "db8500-regs.h" #include "devices-db8500.h" #include "board-mop500.h" #include "ste-dma40-db8500.h" @@ -31,35 +31,6 @@ * SDI 0 (MicroSD slot) */ -/* GPIO pins used by the sdi0 level shifter */ -static int sdi0_en = -1; -static int sdi0_vsel = -1; - -static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios) -{ - switch (ios->power_mode) { - case MMC_POWER_UP: - case MMC_POWER_ON: - /* - * Level shifter voltage should depend on vdd to when deciding - * on either 1.8V or 2.9V. Once the decision has been made the - * level shifter must be disabled and re-enabled with a changed - * select signal in order to switch the voltage. Since there is - * no framework support yet for indicating 1.8V in vdd, use the - * default 2.9V. - */ - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 1); - break; - case MMC_POWER_OFF: - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 0); - break; - } - - return 0; -} - #ifdef CONFIG_STE_DMA40 struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, @@ -81,7 +52,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { #endif struct mmci_platform_data mop500_sdi0_data = { - .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | @@ -101,22 +71,6 @@ struct mmci_platform_data mop500_sdi0_data = { static void sdi0_configure(struct device *parent) { - int ret; - - ret = gpio_request(sdi0_en, "level shifter enable"); - if (!ret) - ret = gpio_request(sdi0_vsel, - "level shifter 1v8-3v select"); - - if (ret) { - pr_warning("unable to config sdi0 gpios for level shifter.\n"); - return; - } - - /* Select the default 2.9V and enable level shifter */ - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 1); - /* Add the device, force v2 to subrevision 1 */ db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); } @@ -124,8 +78,6 @@ static void sdi0_configure(struct device *parent) void mop500_sdi_tc35892_init(struct device *parent) { mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; - sdi0_en = GPIO_SDMMC_EN; - sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL; sdi0_configure(parent); } @@ -264,8 +216,6 @@ void __init snowball_sdi_init(struct device *parent) /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; mop500_sdi0_data.cd_invert = true; - sdi0_en = SNOWBALL_SDMMC_EN_GPIO; - sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; sdi0_configure(parent); } @@ -277,8 +227,6 @@ void __init hrefv60_sdi_init(struct device *parent) db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; sdi0_configure(parent); /* WLAN SDIO channel */ db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c index ead91c968ff4..d397c19570af 100644 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -12,12 +12,15 @@ #include <linux/mfd/tc3589x.h> #include <linux/input/matrix_keypad.h> -#include <mach/irqs.h> +#include "irqs.h" #include "board-mop500.h" -/* Dummy data that can be overridden by staging driver */ -struct i2c_board_info __initdata __weak mop500_i2c3_devices_u8500[] = { +static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = { + { + I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B), + .irq = NOMADIK_GPIO_TO_IRQ(84), + }, }; /* diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 7037d3687e9f..bdaa422da028 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -11,7 +11,6 @@ #include <linux/init.h> #include <linux/i2c.h> -#include <mach/hardware.h> #include "board-mop500.h" #include "id.h" diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index b03457881c4b..a15dd6b63a8f 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <linux/io.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-nomadik.h> @@ -24,6 +25,8 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/ab8500.h> #include <linux/regulator/fixed.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/gpio-regulator.h> #include <linux/mfd/tc3589x.h> #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> @@ -41,13 +44,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/devices.h> -#include <mach/irqs.h> +#include "setup.h" +#include "devices.h" +#include "irqs.h" #include <linux/platform_data/crypto-ux500.h> #include "ste-dma40-db8500.h" +#include "db8500-regs.h" #include "devices-db8500.h" #include "board-mop500.h" #include "board-mop500-regulators.h" @@ -89,6 +92,37 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = { }, }; +/* Dynamically populated. */ +static struct gpio sdi0_reg_gpios[] = { + { 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" }, +}; + +static struct gpio_regulator_state sdi0_reg_states[] = { + { .value = 2900000, .gpios = (0 << 0) }, + { .value = 1800000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config sdi0_reg_info = { + .supply_name = "ext-mmc-level-shifter", + .gpios = sdi0_reg_gpios, + .nr_gpios = ARRAY_SIZE(sdi0_reg_gpios), + .states = sdi0_reg_states, + .nr_states = ARRAY_SIZE(sdi0_reg_states), + .type = REGULATOR_VOLTAGE, + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &sdi0_reg_init_data, + .startup_delay = 100, +}; + +static struct platform_device sdi0_regulator = { + .name = "gpio-regulator", + .id = -1, + .dev = { + .platform_data = &sdi0_reg_info, + }, +}; + static struct abx500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_PIN_GPIO(1), }; @@ -198,71 +232,11 @@ static struct platform_device snowball_sbnet_dev = { struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, - .regulator_reg_init = ab8500_regulator_reg_init, - .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), - .regulator = ab8500_regulators, - .num_regulator = ARRAY_SIZE(ab8500_regulators), + .regulator = &ab8500_regulator_plat_data, .gpio = &ab8500_gpio_pdata, .codec = &ab8500_codec_pdata, }; -/* - * Thermal Sensor - */ - -static struct resource db8500_thsens_resources[] = { - { - .name = "IRQ_HOTMON_LOW", - .start = IRQ_PRCMU_HOTMON_LOW, - .end = IRQ_PRCMU_HOTMON_LOW, - .flags = IORESOURCE_IRQ, - }, - { - .name = "IRQ_HOTMON_HIGH", - .start = IRQ_PRCMU_HOTMON_HIGH, - .end = IRQ_PRCMU_HOTMON_HIGH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct db8500_thsens_platform_data db8500_thsens_data = { - .trip_points[0] = { - .temp = 70000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[1] = { - .temp = 75000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[2] = { - .temp = 80000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[3] = { - .temp = 85000, - .type = THERMAL_TRIP_CRITICAL, - }, - .num_trips = 4, -}; - -static struct platform_device u8500_thsens_device = { - .name = "db8500-thermal", - .resource = db8500_thsens_resources, - .num_resources = ARRAY_SIZE(db8500_thsens_resources), - .dev = { - .platform_data = &db8500_thsens_data, - }, -}; - static struct platform_device u8500_cpufreq_cooling_device = { .name = "db8500-cpufreq-cooling", }; @@ -439,6 +413,15 @@ static void mop500_prox_deactivate(struct device *dev) regulator_put(prox_regulator); } +void mop500_snowball_ethernet_clock_enable(void) +{ + struct clk *clk; + + clk = clk_get_sys("fsmc", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { .dir = STEDMA40_MEM_TO_PERIPH, @@ -481,6 +464,7 @@ static struct hash_platform_data u8500_hash1_platform_data = { /* add any platform devices here - TODO */ static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, + &sdi0_regulator, }; #ifdef CONFIG_STE_DMA40 @@ -622,8 +606,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &snowball_gpio_en_3v3_regulator_dev, - &u8500_thsens_device, &u8500_cpufreq_cooling_device, + &sdi0_regulator, }; static void __init mop500_init_machine(void) @@ -635,6 +619,9 @@ static void __init mop500_init_machine(void) platform_device_register(&db8500_prcmu_device); mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN; + sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; + mop500_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); @@ -668,6 +655,10 @@ static void __init snowball_init_machine(void) int i; platform_device_register(&db8500_prcmu_device); + + sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO; + sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; + snowball_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); @@ -683,6 +674,8 @@ static void __init snowball_init_machine(void) mop500_audio_init(parent); mop500_uart_init(parent); + mop500_snowball_ethernet_clock_enable(); + /* This board has full regulator constraints */ regulator_has_full_constraints(); } @@ -701,6 +694,9 @@ static void __init hrefv60_init_machine(void) */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO; + sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; + hrefv60_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index eaa605f5d90d..49514b825034 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -8,8 +8,8 @@ #define __BOARD_MOP500_H /* For NOMADIK_NR_GPIO */ -#include <mach/irqs.h> -#include <mach/msp.h> +#include "irqs.h" +#include <linux/platform_data/asoc-ux500-msp.h> #include <linux/amba/mmci.h> /* Snowball specific GPIO assignments, this board has no GPIO expander */ @@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); +void mop500_snowball_ethernet_clock_enable(void); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 1c1609da76ce..f58615b5c601 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -9,8 +9,8 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/hardware.h> +#include "db8500-regs.h" #include "id.h" static void __iomem *l2x0_base; @@ -47,8 +47,8 @@ static int __init ux500_l2x0_init(void) /* Unlock before init */ ux500_l2x0_unlock(); - /* DB9540's L2 has 128KB way size */ - if (cpu_is_u9540()) + /* DBx540's L2 has 128KB way size */ + if (cpu_is_ux540_family()) /* 128KB way size */ aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); else diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 19235cf7bbe3..995928ba22fd 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -28,15 +28,13 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/devices.h> -#include <mach/db8500-regs.h> -#include <mach/irqs.h> +#include "setup.h" +#include "devices.h" +#include "irqs.h" #include "devices-db8500.h" #include "ste-dma40-db8500.h" - +#include "db8500-regs.h" #include "board-mop500.h" #include "id.h" @@ -94,8 +92,6 @@ void __init u8500_map_io(void) iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc)); else iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); - - _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } static struct resource db8500_pmu_resources[] = { @@ -282,6 +278,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), @@ -312,9 +309,10 @@ static void __init u8500_init_machine(void) /* Pinmaps must be in place before devices register */ if (of_machine_is_compatible("st-ericsson,mop500")) mop500_pinmaps_init(); - else if (of_machine_is_compatible("calaosystems,snowball-a9500")) + else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pinmaps_init(); - else if (of_machine_is_compatible("st-ericsson,hrefv60+")) + mop500_snowball_ethernet_clock_enable(); + } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} /* TODO: Add pinmaps for ccu9540 board. */ diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 002da9a369d5..b6145ea51641 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -8,7 +8,7 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/mfd/db8500-prcmu.h> +#include <linux/mfd/dbx500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> #include <linux/sys_soc.h> #include <linux/err.h> @@ -20,18 +20,17 @@ #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-ux500.h> +#include <linux/platform_data/arm-ux500-pm.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/devices.h> +#include "setup.h" +#include "devices.h" #include "board-mop500.h" +#include "db8500-regs.h" #include "id.h" -void __iomem *_PRCMU_BASE; - /* * FIXME: Should we set up the GPIO domain here? * @@ -68,13 +67,23 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u8500_family() || cpu_is_u9540()) - db8500_prcmu_early_init(); - - if (cpu_is_u8500_family() || cpu_is_u9540()) - u8500_clk_init(); - else if (cpu_is_u8540()) + if (cpu_is_u8500_family()) { + prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); + ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); + u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); + } else if (cpu_is_u9540()) { + prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); + ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); + u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); + } else if (cpu_is_u8540()) { + prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); + ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); u8540_clk_init(); + } } void __init ux500_init_late(void) diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index ce9149302cc3..317a2be129fb 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -11,18 +11,19 @@ #include <linux/module.h> #include <linux/cpuidle.h> -#include <linux/clockchips.h> #include <linux/spinlock.h> #include <linux/atomic.h> #include <linux/smp.h> #include <linux/mfd/dbx500-prcmu.h> +#include <linux/platform_data/arm-ux500-pm.h> #include <asm/cpuidle.h> #include <asm/proc-fns.h> +#include "db8500-regs.h" + static atomic_t master = ATOMIC_INIT(0); static DEFINE_SPINLOCK(master_lock); -static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device); static inline int ux500_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -30,8 +31,6 @@ static inline int ux500_enter_idle(struct cpuidle_device *dev, int this_cpu = smp_processor_id(); bool recouple = false; - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &this_cpu); - if (atomic_inc_return(&master) == num_online_cpus()) { /* With this lock, we prevent the other cpu to exit and enter @@ -91,22 +90,20 @@ out: spin_unlock(&master_lock); } - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &this_cpu); - return index; } static struct cpuidle_driver ux500_idle_driver = { .name = "ux500_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states = { ARM_CPUIDLE_WFI_STATE, { .enter = ux500_enter_idle, .exit_latency = 70, .target_residency = 260, - .flags = CPUIDLE_FLAG_TIME_VALID, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_TIMER_STOP, .name = "ApIdle", .desc = "ARM Retention", }, @@ -115,59 +112,13 @@ static struct cpuidle_driver ux500_idle_driver = { .state_count = 2, }; -/* - * For each cpu, setup the broadcast timer because we will - * need to migrate the timers for the states >= ApIdle. - */ -static void ux500_setup_broadcast_timer(void *arg) -{ - int cpu = smp_processor_id(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); -} - int __init ux500_idle_init(void) { - int ret, cpu; - struct cpuidle_device *device; - - /* Configure wake up reasons */ + /* Configure wake up reasons */ prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | PRCMU_WAKEUP(ABB)); - /* - * Configure the timer broadcast for each cpu, that must - * be done from the cpu context, so we use a smp cross - * call with 'on_each_cpu'. - */ - on_each_cpu(ux500_setup_broadcast_timer, NULL, 1); - - ret = cpuidle_register_driver(&ux500_idle_driver); - if (ret) { - printk(KERN_ERR "failed to register ux500 idle driver\n"); - return ret; - } - - for_each_online_cpu(cpu) { - device = &per_cpu(ux500_cpuidle_device, cpu); - device->cpu = cpu; - ret = cpuidle_register_device(device); - if (ret) { - printk(KERN_ERR "Failed to register cpuidle " - "device for cpu%d\n", cpu); - goto out_unregister; - } - } -out: - return ret; - -out_unregister: - for_each_online_cpu(cpu) { - device = &per_cpu(ux500_cpuidle_device, cpu); - cpuidle_unregister_device(device); - } - - cpuidle_unregister_driver(&ux500_idle_driver); - goto out; + return cpuidle_register(&ux500_idle_driver, NULL); } device_initcall(ux500_idle_init); diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h index 1530d493879d..b2d7a0b98629 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/db8500-regs.h @@ -170,4 +170,32 @@ /* SoC identification number information */ #define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) +/* Offsets to specific addresses in some IP blocks for DMA */ +#define MSP_TX_RX_REG_OFFSET 0 +#define CRYP1_RX_REG_OFFSET 0x10 +#define CRYP1_TX_REG_OFFSET 0x8 +#define HASH1_TX_REG_OFFSET 0x4 + +/* + * Macros to get at IO space when running virtually + * We dont map all the peripherals, let ioremap do + * this for us. We map only very basic peripherals here. + */ +#define U8500_IO_VIRTUAL 0xf0000000 +#define U8500_IO_PHYSICAL 0xa0000000 +/* This is where we map in the ROM to check ASIC IDs */ +#define UX500_VIRT_ROM 0xf0000000 + +/* This macro is used in assembly, so no cast */ +#define IO_ADDRESS(x) \ + (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) + +/* typesafe io address */ +#define __io_address(n) IOMEM(IO_ADDRESS(n)) + +/* Used by some plat-nomadik code */ +#define io_p2v(n) __io_address(n) + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + #endif diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index 16b5f71e6974..f71b3d7bd4fb 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -13,8 +13,7 @@ #include <linux/platform_device.h> #include <linux/platform_data/pinctrl-nomadik.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "irqs.h" #include "devices-common.h" diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index f3d9419f75d3..1cf94ce0feec 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -15,10 +15,10 @@ #include <linux/platform_data/dma-ste-dma40.h> #include <linux/mfd/dbx500-prcmu.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/irqs.h> +#include "setup.h" +#include "irqs.h" +#include "db8500-regs.h" #include "devices-db8500.h" #include "ste-dma40-db8500.h" @@ -199,6 +199,8 @@ struct platform_device u8500_ske_keypad_device = { struct prcmu_pdata db8500_prcmu_pdata = { .ab_platdata = &ab8500_platdata, + .ab_irq = IRQ_DB8500_AB8500, + .irq_base = IRQ_PRCMU_BASE, .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, }; diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index dbcb35c48f06..321998320f98 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -9,7 +9,8 @@ #define __DEVICES_DB8500_H #include <linux/platform_data/usb-musb-ux500.h> -#include <mach/irqs.h> +#include "irqs.h" +#include "db8500-regs.h" #include "devices-common.h" struct ske_keypad_platform_data; diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c index ea0a2f92ca70..0f9e52b95935 100644 --- a/arch/arm/mach-ux500/devices.c +++ b/arch/arm/mach-ux500/devices.c @@ -11,8 +11,9 @@ #include <linux/io.h> #include <linux/amba/bus.h> -#include <mach/hardware.h> -#include <mach/setup.h> +#include "setup.h" + +#include "db8500-regs.h" void __init amba_add_devices(struct amba_device *devs[], int num) { diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/devices.h index cbc6f1e4104d..cbc6f1e4104d 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/devices.h diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index 2f6af259015d..2bc00b085e38 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -12,10 +12,9 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> -#include <mach/setup.h> +#include "setup.h" /* * platform-specific code to shutdown a CPU @@ -24,8 +23,6 @@ */ void __ref ux500_cpu_die(unsigned int cpu) { - flush_cache_all(); - /* directly enter low power state, skipping secure registers */ for (;;) { __asm__ __volatile__("dsb\n\t" "wfi\n\t" diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index 9f951842e1e5..0d33d1a06955 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -14,9 +14,9 @@ #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/setup.h> +#include "setup.h" +#include "db8500-regs.h" #include "id.h" struct dbx500_asic_id dbx500_id; diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S deleted file mode 100644 index 67035223334a..000000000000 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <mach/hardware.h> - -#if CONFIG_UX500_DEBUG_UART > 2 -#error Invalid Ux500 debug UART -#endif - -/* - * DEBUG_LL only works if only one SOC is built in. We don't use #else below - * in order to get "__UX500_UART redefined" warnings if more than one SOC is - * built, so that there's some hint during the build that something is wrong. - */ - -#ifdef CONFIG_UX500_SOC_DB8500 -#define __UX500_UART(n) U8500_UART##n##_BASE -#endif - -#ifndef __UX500_UART -#error Unknown SOC -#endif - -#define UX500_UART(n) __UX500_UART(n) -#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - - .macro addruart, rp, rv, tmp - ldr \rp, =UART_BASE @ no, physical address - ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address - .endm - -#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h deleted file mode 100644 index 5201ddace503..000000000000 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * U8500 hardware definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -/* - * Macros to get at IO space when running virtually - * We dont map all the peripherals, let ioremap do - * this for us. We map only very basic peripherals here. - */ -#define U8500_IO_VIRTUAL 0xf0000000 -#define U8500_IO_PHYSICAL 0xa0000000 -/* This is where we map in the ROM to check ASIC IDs */ -#define UX500_VIRT_ROM 0xf0000000 - -/* This macro is used in assembly, so no cast */ -#define IO_ADDRESS(x) \ - (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) - -/* typesafe io address */ -#define __io_address(n) IOMEM(IO_ADDRESS(n)) - -/* Used by some plat-nomadik code */ -#define io_p2v(n) __io_address(n) - -#include <mach/db8500-regs.h> - -#define MSP_TX_RX_REG_OFFSET 0 -#define CRYP1_RX_REG_OFFSET 0x10 -#define CRYP1_TX_REG_OFFSET 0x8 -#define HASH1_TX_REG_OFFSET 0x4 - -#ifndef __ASSEMBLY__ - -extern void __iomem *_PRCMU_BASE; - -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - -#endif /* __ASSEMBLY__ */ -#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h deleted file mode 100644 index 9991aea3d577..000000000000 --- a/arch/arm/mach-ux500/include/mach/msp.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __MSP_H -#define __MSP_H - -#include <linux/platform_data/dma-ste-dma40.h> - -enum msp_i2s_id { - MSP_I2S_0 = 0, - MSP_I2S_1, - MSP_I2S_2, - MSP_I2S_3, -}; - -/* Platform data structure for a MSP I2S-device */ -struct msp_i2s_platform_data { - enum msp_i2s_id id; - struct stedma40_chan_cfg *msp_i2s_dma_rx; - struct stedma40_chan_cfg *msp_i2s_dma_tx; -}; - -#endif diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h deleted file mode 100644 index d0942c174018..000000000000 --- a/arch/arm/mach-ux500/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 110000000 - -#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h deleted file mode 100644 index 36969d52e53a..000000000000 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <linux/io.h> -#include <linux/amba/serial.h> -#include <mach/hardware.h> - -void __iomem *ux500_uart_base; - -static void putc(const char c) -{ - /* Do nothing if the UART is not enabled. */ - if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) - return; - - if (c == '\n') - putc('\r'); - - while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5)) - barrier(); - __raw_writeb(c, ux500_uart_base + UART01x_DR); -} - -static void flush(void) -{ - if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) - return; - while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3)) - barrier(); -} - -static inline void arch_decomp_setup(void) -{ - /* Use machine_is_foo() macro if you need to switch base someday */ - ux500_uart_base = (void __iomem *)U8500_UART2_BASE; -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/irqs-board-mop500.h index d526dd8e87d3..d526dd8e87d3 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/irqs-board-mop500.h diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/irqs-db8500.h index 68bc14974608..f3a9d5947ef3 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h +++ b/arch/arm/mach-ux500/irqs-db8500.h @@ -109,31 +109,6 @@ /* Virtual interrupts corresponding to the PRCMU wakeups. */ #define IRQ_PRCMU_BASE IRQ_SOC_START -#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE) - -#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE) -#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1) -#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2) -#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3) -#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4) -#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5) -#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6) -#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7) -#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8) -#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9) -#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10) -#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11) -#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12) -#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13) -#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14) -#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15) -#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16) -#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17) -#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18) -#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19) -#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20) -#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21) -#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22) #define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23) /* diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/irqs.h index fc77b4274c8d..15b2af698ed7 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/irqs.h @@ -10,8 +10,6 @@ #ifndef ASM_ARCH_IRQS_H #define ASM_ARCH_IRQS_H -#include <mach/hardware.h> - #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 @@ -36,14 +34,14 @@ /* This will be overridden by SoC-specific irq headers */ #define IRQ_SOC_END IRQ_SOC_START -#include <mach/irqs-db8500.h> +#include "irqs-db8500.h" #define IRQ_BOARD_START IRQ_SOC_END /* This will be overridden by board-specific irq headers */ #define IRQ_BOARD_END IRQ_BOARD_START #ifdef CONFIG_MACH_MOP500 -#include <mach/irqs-board-mop500.h> +#include "irqs-board-mop500.h" #endif #define UX500_NR_IRQS IRQ_BOARD_END diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 18f7af339dc9..14d90469392f 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -16,15 +16,14 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> -#include <mach/hardware.h> -#include <mach/setup.h> +#include "setup.h" +#include "db8500-regs.h" #include "id.h" /* This is called from headsmp.S to wakeup the secondary core */ @@ -58,13 +57,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit ux500_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c new file mode 100644 index 000000000000..1a468f0fd22e --- /dev/null +++ b/arch/arm/mach-ux500/pm.c @@ -0,0 +1,167 @@ +/* + * Copyright (C) ST-Ericsson SA 2010-2013 + * Author: Rickard Andersson <rickard.andersson@stericsson.com> for + * ST-Ericsson. + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro. + * License terms: GNU General Public License (GPL) version 2 + * + */ + +#include <linux/kernel.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/platform_data/arm-ux500-pm.h> + +#include "db8500-regs.h" + +/* ARM WFI Standby signal register */ +#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130) +#define PRCM_ARM_WFI_STANDBY_WFI0 0x08 +#define PRCM_ARM_WFI_STANDBY_WFI1 0x10 +#define PRCM_IOCR (prcmu_base + 0x310) +#define PRCM_IOCR_IOFORCE 0x1 + +/* Dual A9 core interrupt management unit registers */ +#define PRCM_A9_MASK_REQ (prcmu_base + 0x328) +#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1 + +#define PRCM_A9_MASK_ACK (prcmu_base + 0x32c) +#define PRCM_ARMITMSK31TO0 (prcmu_base + 0x11c) +#define PRCM_ARMITMSK63TO32 (prcmu_base + 0x120) +#define PRCM_ARMITMSK95TO64 (prcmu_base + 0x124) +#define PRCM_ARMITMSK127TO96 (prcmu_base + 0x128) +#define PRCM_POWER_STATE_VAL (prcmu_base + 0x25C) +#define PRCM_ARMITVAL31TO0 (prcmu_base + 0x260) +#define PRCM_ARMITVAL63TO32 (prcmu_base + 0x264) +#define PRCM_ARMITVAL95TO64 (prcmu_base + 0x268) +#define PRCM_ARMITVAL127TO96 (prcmu_base + 0x26C) + +static void __iomem *prcmu_base; + +/* This function decouple the gic from the prcmu */ +int prcmu_gic_decouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 1 */ + writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, + PRCM_A9_MASK_REQ); + + /* Make sure the register is updated */ + readl(PRCM_A9_MASK_REQ); + + /* Wait a few cycles for the gic mask completion */ + udelay(1); + + return 0; +} + +/* This function recouple the gic with the prcmu */ +int prcmu_gic_recouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 0 */ + writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ); + + return 0; +} + +#define PRCMU_GIC_NUMBER_REGS 5 + +/* + * This function checks if there are pending irq on the gic. It only + * makes sense if the gic has been decoupled before with the + * db8500_prcmu_gic_decouple function. Disabling an interrupt only + * disables the forwarding of the interrupt to any CPU interface. It + * does not prevent the interrupt from changing state, for example + * becoming pending, or active and pending if it is already + * active. Hence, we have to check the interrupt is pending *and* is + * active. + */ +bool prcmu_gic_pending_irq(void) +{ + u32 pr; /* Pending register */ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* 5 registers. STI & PPI not skipped */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) { + + pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4); + er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + if (pr & er) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if there are pending interrupt on the + * prcmu which has been delegated to monitor the irqs with the + * db8500_prcmu_copy_gic_settings function. + */ +bool prcmu_pending_irq(void) +{ + u32 it, im; + int i; + + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + it = readl(PRCM_ARMITVAL31TO0 + i * 4); + im = readl(PRCM_ARMITMSK31TO0 + i * 4); + if (it & im) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if the specified cpu is in in WFI. It's usage + * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple + * function. Of course passing smp_processor_id() to this function will + * always return false... + */ +bool prcmu_is_cpu_in_wfi(int cpu) +{ + return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : + PRCM_ARM_WFI_STANDBY_WFI0; +} + +/* + * This function copies the gic SPI settings to the prcmu in order to + * monitor them and abort/finish the retention/off sequence or state. + */ +int prcmu_copy_gic_settings(void) +{ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* We skip the STI and PPI */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + er = readl_relaxed(dist_base + + GIC_DIST_ENABLE_SET + (i + 1) * 4); + writel(er, PRCM_ARMITMSK31TO0 + i * 4); + } + + return 0; +} + +void __init ux500_pm_init(u32 phy_base, u32 size) +{ + prcmu_base = ioremap(phy_base, size); + if (!prcmu_base) { + pr_err("could not remap PRCMU for PM functions\n"); + return; + } + /* + * On watchdog reboot the GIC is in some cases decoupled. + * This will make sure that the GIC is correctly configured. + */ + prcmu_gic_recouple(); +} diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/setup.h index bddce2b49372..bddce2b49372 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/setup.h diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index d07bbe7f04a6..b6bd0efcbe64 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -14,10 +14,10 @@ #include <asm/smp_twd.h> -#include <mach/setup.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "setup.h" +#include "irqs.h" +#include "db8500-regs.h" #include "id.h" #ifdef CONFIG_HAVE_ARM_TWD diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 78ac65f62e87..2dfc72f7cd8a 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -10,7 +10,7 @@ #include <linux/platform_data/usb-musb-ux500.h> #include <linux/platform_data/dma-ste-dma40.h> -#include <mach/hardware.h> +#include "db8500-regs.h" #define MUSB_DMA40_RX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 52d315b792c8..5907e10c37fd 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -9,6 +9,8 @@ config ARCH_VEXPRESS select COMMON_CLK_VERSATILE select CPU_V7 select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CLK select HAVE_PATA_PLATFORM select HAVE_SMP @@ -17,6 +19,9 @@ config ARCH_VEXPRESS select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD + select POWER_RESET + select POWER_RESET_VEXPRESS + select POWER_SUPPLY select REGULATOR_FIXED_VOLTAGE if REGULATOR select VEXPRESS_CONFIG help diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 80b64971fbdd..42703e8b4d3b 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,7 +4,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-versatile/include -obj-y := v2m.o reset.o +obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index a141b98d84fe..f0ce6b8f5e71 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -12,7 +12,6 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/cp15.h> @@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void) { unsigned int v; - flush_cache_all(); asm volatile( "mcr p15, 0, %1, c7, c5, 0\n" " mcr p15, 0, %1, c7, c10, 4\n" diff --git a/arch/arm/mach-vexpress/reset.c b/arch/arm/mach-vexpress/reset.c deleted file mode 100644 index 465923aa3819..000000000000 --- a/arch/arm/mach-vexpress/reset.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Copyright (C) 2012 ARM Limited - */ - -#include <linux/jiffies.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> -#include <linux/stat.h> -#include <linux/vexpress.h> - -static void vexpress_reset_do(struct device *dev, const char *what) -{ - int err = -ENOENT; - struct vexpress_config_func *func = - vexpress_config_func_get_by_dev(dev); - - if (func) { - unsigned long timeout; - - err = vexpress_config_write(func, 0, 0); - - timeout = jiffies + HZ; - while (time_before(jiffies, timeout)) - cpu_relax(); - } - - dev_emerg(dev, "Unable to %s (%d)\n", what, err); -} - -static struct device *vexpress_power_off_device; - -void vexpress_power_off(void) -{ - vexpress_reset_do(vexpress_power_off_device, "power off"); -} - -static struct device *vexpress_restart_device; - -void vexpress_restart(char str, const char *cmd) -{ - vexpress_reset_do(vexpress_restart_device, "restart"); -} - -static ssize_t vexpress_reset_active_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n", vexpress_restart_device == dev); -} - -static ssize_t vexpress_reset_active_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - long value; - int err = kstrtol(buf, 0, &value); - - if (!err && value) - vexpress_restart_device = dev; - - return err ? err : count; -} - -DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show, - vexpress_reset_active_store); - - -enum vexpress_reset_func { FUNC_RESET, FUNC_SHUTDOWN, FUNC_REBOOT }; - -static struct of_device_id vexpress_reset_of_match[] = { - { - .compatible = "arm,vexpress-reset", - .data = (void *)FUNC_RESET, - }, { - .compatible = "arm,vexpress-shutdown", - .data = (void *)FUNC_SHUTDOWN - }, { - .compatible = "arm,vexpress-reboot", - .data = (void *)FUNC_REBOOT - }, - {} -}; - -static int vexpress_reset_probe(struct platform_device *pdev) -{ - enum vexpress_reset_func func; - const struct of_device_id *match = - of_match_device(vexpress_reset_of_match, &pdev->dev); - - if (match) - func = (enum vexpress_reset_func)match->data; - else - func = pdev->id_entry->driver_data; - - switch (func) { - case FUNC_SHUTDOWN: - vexpress_power_off_device = &pdev->dev; - break; - case FUNC_RESET: - if (!vexpress_restart_device) - vexpress_restart_device = &pdev->dev; - device_create_file(&pdev->dev, &dev_attr_active); - break; - case FUNC_REBOOT: - vexpress_restart_device = &pdev->dev; - device_create_file(&pdev->dev, &dev_attr_active); - break; - }; - - return 0; -} - -static const struct platform_device_id vexpress_reset_id_table[] = { - { .name = "vexpress-reset", .driver_data = FUNC_RESET, }, - { .name = "vexpress-shutdown", .driver_data = FUNC_SHUTDOWN, }, - { .name = "vexpress-reboot", .driver_data = FUNC_REBOOT, }, - {} -}; - -static struct platform_driver vexpress_reset_driver = { - .probe = vexpress_reset_probe, - .driver = { - .name = "vexpress-reset", - .of_match_table = vexpress_reset_of_match, - }, - .id_table = vexpress_reset_id_table, -}; - -static int __init vexpress_reset_init(void) -{ - return platform_driver_register(&vexpress_reset_driver); -} -device_initcall(vexpress_reset_init); diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index d0ad78998cb6..9366f37902d9 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -22,6 +22,8 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/vexpress.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> #include <asm/arch_timer.h> #include <asm/mach-types.h> @@ -361,8 +363,6 @@ static void __init v2m_init(void) for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) amba_device_register(v2m_amba_devs[i], &iomem_resource); - pm_power_off = vexpress_power_off; - ct_desc->init_tile(); } @@ -374,7 +374,6 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_irq = v2m_init_irq, .init_time = v2m_timer_init, .init_machine = v2m_init, - .restart = vexpress_restart, MACHINE_END static struct map_desc v2m_rs1_io_desc __initdata = { @@ -433,7 +432,7 @@ static void __init v2m_dt_timer_init(void) { struct device_node *node = NULL; - vexpress_clk_of_init(); + of_clk_init(NULL); clocksource_of_init(); do { @@ -442,6 +441,10 @@ static void __init v2m_dt_timer_init(void) if (node) { pr_info("Using SP804 '%s' as a clock & events source\n", node->full_name); + WARN_ON(clk_register_clkdev(of_clk_get_by_name(node, + "timclken1"), "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(of_clk_get_by_name(node, + "timclken2"), "v2m-timer1", "sp804")); v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0)); } @@ -464,7 +467,6 @@ static void __init v2m_dt_init(void) { l2x0_of_init(0x00400000, 0xfe0fffff); of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); - pm_power_off = vexpress_power_off; } static const char * const v2m_dt_match[] __initconst = { @@ -481,5 +483,4 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .init_irq = irqchip_init, .init_time = v2m_dt_timer_init, .init_machine = v2m_dt_init, - .restart = vexpress_restart, MACHINE_END diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c index 8badaabe70a1..f4143f5bfa5b 100644 --- a/arch/arm/mach-virt/platsmp.c +++ b/arch/arm/mach-virt/platsmp.c @@ -21,8 +21,6 @@ #include <linux/smp.h> #include <linux/of.h> -#include <linux/irqchip/arm-gic.h> - #include <asm/psci.h> #include <asm/smp_plat.h> @@ -45,14 +43,8 @@ static int __cpuinit virt_boot_secondary(unsigned int cpu, return -ENODEV; } -static void __cpuinit virt_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - struct smp_operations __initdata virt_smp_ops = { .smp_init_cpus = virt_smp_init_cpus, .smp_prepare_cpus = virt_smp_prepare_cpus, - .smp_secondary_init = virt_secondary_init, .smp_boot_secondary = virt_boot_secondary, }; diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 7abdb9645c5b..e65a80a1ac75 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/cpu.h> #include <linux/mtd/physmap.h> #include <linux/mtd/mtd.h> @@ -531,7 +532,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = { void __init nuc900_board_init(struct platform_device **device, int size) { - disable_hlt(); + cpu_idle_poll_ctrl(true); platform_add_devices(device, size); platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); spi_register_board_info(nuc900_spi_board_info, diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index d70651e8b705..cf3226b041f5 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -5,6 +5,8 @@ config ARCH_ZYNQ select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select ICST select MIGHT_HAVE_CACHE_L2X0 select USE_OF diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 025d17328730..35955b54944c 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -43,7 +43,7 @@ config CPU_ARM740T depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T - select CPU_CACHE_V3 # although the core is v4t + select CPU_CACHE_V4 select CPU_CP15_MPU select CPU_PABRT_LEGACY help @@ -397,6 +397,13 @@ config CPU_V7 select CPU_PABRT_V7 select CPU_TLB_V7 if MMU +config CPU_THUMBONLY + bool + # There are no CPUs available with MMU that don't implement an ARM ISA: + depends on !MMU + help + Select this if your CPU doesn't support the 32 bit ARM instructions. + # Figure out what processor architecture version we should be using. # This defines the compiler instruction set which depends on the machine type. config CPU_32v3 @@ -469,9 +476,6 @@ config CPU_PABRT_V7 bool # The cache model -config CPU_CACHE_V3 - bool - config CPU_CACHE_V4 bool @@ -608,7 +612,7 @@ config ARCH_DMA_ADDR_T_64BIT bool config ARM_THUMB - bool "Support Thumb user binaries" + bool "Support Thumb user binaries" if !CPU_THUMBONLY depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON default y help diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 4e333fa2756f..9e51be96f635 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o -obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index db26e2e543f4..6f4585b89078 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -961,12 +961,14 @@ static int __init alignment_init(void) return -ENOMEM; #endif +#ifdef CONFIG_CPU_CP15 if (cpu_is_v6_unaligned()) { cr_alignment &= ~CR_A; cr_no_alignment &= ~CR_A; set_cr(cr_alignment); ai_usermode = safe_usermode(ai_usermode, false); } +#endif hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN, "alignment exception"); diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index dd3d59122cc3..48bc3c0a87ce 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -343,6 +343,7 @@ void __init feroceon_l2_init(int __l2_wt_override) outer_cache.inv_range = feroceon_l2_inv_range; outer_cache.clean_range = feroceon_l2_clean_range; outer_cache.flush_range = feroceon_l2_flush_range; + outer_cache.inv_all = l2_inv_all; enable_l2(); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index c2f37390308a..c465faca51b0 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -299,7 +299,7 @@ static void l2x0_unlock(u32 cache_id) int lockregs; int i; - switch (cache_id) { + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: lockregs = 8; break; @@ -333,15 +333,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) if (cache_id_part_number_from_dt) cache_id = cache_id_part_number_from_dt; else - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID) - & L2X0_CACHE_ID_PART_MASK; + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; /* Determine the number of ways */ - switch (cache_id) { + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: if (aux & (1 << 16)) ways = 16; @@ -725,7 +724,6 @@ static const struct l2x0_of_data pl310_data = { .flush_all = l2x0_flush_all, .inv_all = l2x0_inv_all, .disable = l2x0_disable, - .set_debug = pl310_set_debug, }, }; @@ -814,9 +812,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data->save(); of_init = true; - l2x0_init(l2x0_base, aux_val, aux_mask); - memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); + l2x0_init(l2x0_base, aux_val, aux_mask); return 0; } diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S deleted file mode 100644 index 8a3fadece8d3..000000000000 --- a/arch/arm/mm/cache-v3.S +++ /dev/null @@ -1,137 +0,0 @@ -/* - * linux/arch/arm/mm/cache-v3.S - * - * Copyright (C) 1997-2002 Russell king - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/page.h> -#include "proc-macros.S" - -/* - * flush_icache_all() - * - * Unconditionally clean and invalidate the entire icache. - */ -ENTRY(v3_flush_icache_all) - mov pc, lr -ENDPROC(v3_flush_icache_all) - -/* - * flush_user_cache_all() - * - * Invalidate all cache entries in a particular address - * space. - * - * - mm - mm_struct describing address space - */ -ENTRY(v3_flush_user_cache_all) - /* FALLTHROUGH */ -/* - * flush_kern_cache_all() - * - * Clean and invalidate the entire cache. - */ -ENTRY(v3_flush_kern_cache_all) - /* FALLTHROUGH */ - -/* - * flush_user_cache_range(start, end, flags) - * - * Invalidate a range of cache entries in the specified - * address space. - * - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - * - flags - vma_area_struct flags describing address space - */ -ENTRY(v3_flush_user_cache_range) - mov ip, #0 - mcreq p15, 0, ip, c7, c0, 0 @ flush ID cache - mov pc, lr - -/* - * coherent_kern_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start. If you have non-snooping - * Harvard caches, you need to implement this function. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(v3_coherent_kern_range) - /* FALLTHROUGH */ - -/* - * coherent_user_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start. If you have non-snooping - * Harvard caches, you need to implement this function. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(v3_coherent_user_range) - mov r0, #0 - mov pc, lr - -/* - * flush_kern_dcache_area(void *page, size_t size) - * - * Ensure no D cache aliasing occurs, either with itself or - * the I cache - * - * - addr - kernel address - * - size - region size - */ -ENTRY(v3_flush_kern_dcache_area) - /* FALLTHROUGH */ - -/* - * dma_flush_range(start, end) - * - * Clean and invalidate the specified virtual address range. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(v3_dma_flush_range) - mov r0, #0 - mcr p15, 0, r0, c7, c0, 0 @ flush ID cache - mov pc, lr - -/* - * dma_unmap_area(start, size, dir) - * - start - kernel virtual start address - * - size - size of region - * - dir - DMA direction - */ -ENTRY(v3_dma_unmap_area) - teq r2, #DMA_TO_DEVICE - bne v3_dma_flush_range - /* FALLTHROUGH */ - -/* - * dma_map_area(start, size, dir) - * - start - kernel virtual start address - * - size - size of region - * - dir - DMA direction - */ -ENTRY(v3_dma_map_area) - mov pc, lr -ENDPROC(v3_dma_unmap_area) -ENDPROC(v3_dma_map_area) - - .globl v3_flush_kern_cache_louis - .equ v3_flush_kern_cache_louis, v3_flush_kern_cache_all - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions v3 diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index 43e5d77be677..a7ba68f59f0c 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -58,7 +58,7 @@ ENTRY(v4_flush_kern_cache_all) ENTRY(v4_flush_user_cache_range) #ifdef CONFIG_CPU_CP15 mov ip, #0 - mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache + mcr p15, 0, ip, c7, c7, 0 @ flush ID cache mov pc, lr #else /* FALLTHROUGH */ diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index a5a4b2bc42ba..2ac37372ef52 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -48,7 +48,7 @@ static DEFINE_RAW_SPINLOCK(cpu_asid_lock); static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION); static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS); -static DEFINE_PER_CPU(atomic64_t, active_asids); +DEFINE_PER_CPU(atomic64_t, active_asids); static DEFINE_PER_CPU(u64, reserved_asids); static cpumask_t tlb_flush_pending; @@ -215,6 +215,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) { local_flush_bp_all(); local_flush_tlb_all(); + dummy_flush_tlb_a15_erratum(); } atomic64_set(&per_cpu(active_asids, cpu), asid); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e9db6b4bf65a..ef3e0f3aac96 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -823,16 +823,17 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, if (PageHighMem(page)) { if (len + offset > PAGE_SIZE) len = PAGE_SIZE - offset; - vaddr = kmap_high_get(page); - if (vaddr) { - vaddr += offset; - op(vaddr, len, dir); - kunmap_high(page); - } else if (cache_is_vipt()) { - /* unmapped pages might still be cached */ + + if (cache_is_vipt_nonaliasing()) { vaddr = kmap_atomic(page); op(vaddr + offset, len, dir); kunmap_atomic(vaddr); + } else { + vaddr = kmap_high_get(page); + if (vaddr) { + op(vaddr + offset, len, dir); + kunmap_high(page); + } } } else { vaddr = page_address(page) + offset; diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 1c8f7f564175..0d473cce501c 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -170,15 +170,18 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) if (!PageHighMem(page)) { __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } else { - void *addr = kmap_high_get(page); - if (addr) { - __cpuc_flush_dcache_area(addr, PAGE_SIZE); - kunmap_high(page); - } else if (cache_is_vipt()) { - /* unmapped pages might still be cached */ + void *addr; + + if (cache_is_vipt_nonaliasing()) { addr = kmap_atomic(page); __cpuc_flush_dcache_area(addr, PAGE_SIZE); kunmap_atomic(addr); + } else { + addr = kmap_high_get(page); + if (addr) { + __cpuc_flush_dcache_area(addr, PAGE_SIZE); + kunmap_high(page); + } } } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index ad722f1208a5..9a5cdc01fcdf 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -99,6 +99,9 @@ void show_mem(unsigned int filter) printk("Mem-info:\n"); show_free_areas(filter); + if (filter & SHOW_MEM_FILTER_PAGE_COUNT) + return; + for_each_bank (i, mi) { struct membank *bank = &mi->bank[i]; unsigned int pfn1, pfn2; @@ -424,24 +427,6 @@ void __init bootmem_init(void) max_pfn = max_high - PHYS_PFN_OFFSET; } -static inline int free_area(unsigned long pfn, unsigned long end, char *s) -{ - unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10); - - for (; pfn < end; pfn++) { - struct page *page = pfn_to_page(pfn); - ClearPageReserved(page); - init_page_count(page); - __free_page(page); - pages++; - } - - if (size && s) - printk(KERN_INFO "Freeing %s memory: %dK\n", s, size); - - return pages; -} - /* * Poison init memory with an undefined instruction (ARM) or a branch to an * undefined instruction (Thumb). @@ -534,6 +519,14 @@ static void __init free_unused_memmap(struct meminfo *mi) #endif } +#ifdef CONFIG_HIGHMEM +static inline void free_area_high(unsigned long pfn, unsigned long end) +{ + for (; pfn < end; pfn++) + free_highmem_page(pfn_to_page(pfn)); +} +#endif + static void __init free_highpages(void) { #ifdef CONFIG_HIGHMEM @@ -569,8 +562,7 @@ static void __init free_highpages(void) if (res_end > end) res_end = end; if (res_start != start) - totalhigh_pages += free_area(start, res_start, - NULL); + free_area_high(start, res_start); start = res_end; if (start == end) break; @@ -578,9 +570,8 @@ static void __init free_highpages(void) /* And now free anything which remains */ if (start < end) - totalhigh_pages += free_area(start, end, NULL); + free_area_high(start, end); } - totalram_pages += totalhigh_pages; #endif } @@ -609,8 +600,7 @@ void __init mem_init(void) #ifdef CONFIG_SA1111 /* now that our DMA memory is actually so designated, we can free it */ - totalram_pages += free_area(PHYS_PFN_OFFSET, - __phys_to_pfn(__pa(swapper_pg_dir)), NULL); + free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL); #endif free_highpages(); @@ -738,16 +728,12 @@ void free_initmem(void) extern char __tcm_start, __tcm_end; poison_init_mem(&__tcm_start, &__tcm_end - &__tcm_start); - totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)), - __phys_to_pfn(__pa(&__tcm_end)), - "TCM link"); + free_reserved_area(&__tcm_start, &__tcm_end, 0, "TCM link"); #endif poison_init_mem(__init_begin, __init_end - __init_begin); if (!machine_is_integrator() && !machine_is_cintegrator()) - totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)), - __phys_to_pfn(__pa(__init_end)), - "init"); + free_initmem_default(0); } #ifdef CONFIG_BLK_DEV_INITRD @@ -758,9 +744,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) { if (!keep_initrd) { poison_init_mem((void *)start, PAGE_ALIGN(end) - start); - totalram_pages += free_area(__phys_to_pfn(__pa(start)), - __phys_to_pfn(__pa(end)), - "initrd"); + free_reserved_area(start, end, 0, "initrd"); } } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e95a996ab78f..e0d8565671a6 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -34,6 +34,7 @@ #include <asm/mach/pci.h> #include "mm.h" +#include "tcm.h" /* * empty_zero_page is a special page that is used for @@ -112,6 +113,7 @@ static struct cachepolicy cache_policies[] __initdata = { } }; +#ifdef CONFIG_CPU_CP15 /* * These are useful for identifying cache coherency * problems by allowing the cache or the cache and @@ -210,6 +212,22 @@ void adjust_cr(unsigned long mask, unsigned long set) } #endif +#else /* ifdef CONFIG_CPU_CP15 */ + +static int __init early_cachepolicy(char *p) +{ + pr_warning("cachepolicy kernel parameter not supported without cp15\n"); +} +early_param("cachepolicy", early_cachepolicy); + +static int __init noalign_setup(char *__unused) +{ + pr_warning("noalign kernel parameter not supported without cp15\n"); +} +__setup("noalign", noalign_setup); + +#endif /* ifdef CONFIG_CPU_CP15 / else */ + #define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN #define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE @@ -598,39 +616,60 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init alloc_init_section(pud_t *pud, unsigned long addr, - unsigned long end, phys_addr_t phys, - const struct mem_type *type) +static void __init map_init_section(pmd_t *pmd, unsigned long addr, + unsigned long end, phys_addr_t phys, + const struct mem_type *type) { - pmd_t *pmd = pmd_offset(pud, addr); - +#ifndef CONFIG_ARM_LPAE /* - * Try a section mapping - end, addr and phys must all be aligned - * to a section boundary. Note that PMDs refer to the individual - * L1 entries, whereas PGDs refer to a group of L1 entries making - * up one logical pointer to an L2 table. + * In classic MMU format, puds and pmds are folded in to + * the pgds. pmd_offset gives the PGD entry. PGDs refer to a + * group of L1 entries making up one logical pointer to + * an L2 table (2MB), where as PMDs refer to the individual + * L1 entries (1MB). Hence increment to get the correct + * offset for odd 1MB sections. + * (See arch/arm/include/asm/pgtable-2level.h) */ - if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) { - pmd_t *p = pmd; - -#ifndef CONFIG_ARM_LPAE - if (addr & SECTION_SIZE) - pmd++; + if (addr & SECTION_SIZE) + pmd++; #endif + do { + *pmd = __pmd(phys | type->prot_sect); + phys += SECTION_SIZE; + } while (pmd++, addr += SECTION_SIZE, addr != end); - do { - *pmd = __pmd(phys | type->prot_sect); - phys += SECTION_SIZE; - } while (pmd++, addr += SECTION_SIZE, addr != end); + flush_pmd_entry(pmd); +} - flush_pmd_entry(p); - } else { +static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, + unsigned long end, phys_addr_t phys, + const struct mem_type *type) +{ + pmd_t *pmd = pmd_offset(pud, addr); + unsigned long next; + + do { /* - * No need to loop; pte's aren't interested in the - * individual L1 entries. + * With LPAE, we must loop over to map + * all the pmds for the given range. */ - alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type); - } + next = pmd_addr_end(addr, end); + + /* + * Try a section mapping - addr, next and phys must all be + * aligned to a section boundary. + */ + if (type->prot_sect && + ((addr | next | phys) & ~SECTION_MASK) == 0) { + map_init_section(pmd, addr, next, phys, type); + } else { + alloc_init_pte(pmd, addr, next, + __phys_to_pfn(phys), type); + } + + phys += next - addr; + + } while (pmd++, addr = next, addr != end); } static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, @@ -641,7 +680,7 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, do { next = pud_addr_end(addr, end); - alloc_init_section(pud, addr, next, phys, type); + alloc_init_pmd(pud, addr, next, phys, type); phys += next - addr; } while (pud++, addr = next, addr != end); } @@ -1256,6 +1295,7 @@ void __init paging_init(struct machine_desc *mdesc) dma_contiguous_remap(); devicemaps_init(mdesc); kmap_init(); + tcm_init(); top_pmd = pmd_off_k(0xffff0000); diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index dc5de5d53f20..fde2d2a794cf 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -77,24 +77,27 @@ __arm740_setup: mcr p15, 0, r0, c6, c0 @ set area 0, default ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM - ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 + ldr r3, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) + mov r4, #10 @ 11 is the minimum (4KB) +1: add r4, r4, #1 @ area size *= 2 + movs r3, r3, lsr #1 bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, r4, lsl #1 @ the area register value orr r0, r0, #1 @ set enable bit mcr p15, 0, r0, c6, c1 @ set area 1, RAM ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH - ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 + ldr r3, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) + cmp r3, #0 + moveq r0, #0 + beq 2f + mov r4, #10 @ 11 is the minimum (4KB) +1: add r4, r4, #1 @ area size *= 2 + movs r3, r3, lsr #1 bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, r4, lsl #1 @ the area register value orr r0, r0, #1 @ set enable bit - mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH +2: mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH mov r0, #0x06 mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable @@ -137,13 +140,14 @@ __arm740_proc_info: .long 0x41807400 .long 0xfffffff0 .long 0 + .long 0 b __arm740_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_26BIT .long cpu_arm740_name .long arm740_processor_functions .long 0 .long 0 - .long v3_cache_fns @ cache model + .long v4_cache_fns @ cache model .size __arm740_proc_info, . - __arm740_proc_info diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2c3b9421ab5e..2556cf1c2da1 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -387,7 +387,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size .equ cpu_arm920_suspend_size, 4 * 3 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index f1803f7e2972..344c8a548cc0 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -402,7 +402,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size .equ cpu_arm926_suspend_size, 4 * 3 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 82f9cdc751d6..0b60dd3d742a 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -350,7 +350,7 @@ ENTRY(cpu_mohawk_set_pte_ext) .globl cpu_mohawk_suspend_size .equ cpu_mohawk_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_mohawk_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 3aa0da11fd84..d92dfd081429 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -172,7 +172,7 @@ ENTRY(cpu_sa1100_set_pte_ext) .globl cpu_sa1100_suspend_size .equ cpu_sa1100_suspend_size, 4 * 3 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_sa1100_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c3, c0, 0 @ domain ID diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 3e6210b4d6d4..054b491ff764 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -17,7 +17,9 @@ #ifndef MULTI_CPU EXPORT_SYMBOL(cpu_dcache_clean_area); +#ifdef CONFIG_MMU EXPORT_SYMBOL(cpu_set_pte_ext); +#endif #else EXPORT_SYMBOL(processor); #endif diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index bcaaa8de9325..919405e20b80 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -80,12 +80,10 @@ ENTRY(cpu_v6_do_idle) mov pc, lr ENTRY(cpu_v6_dcache_clean_area) -#ifndef TLB_CAN_READ_FROM_L1_CACHE 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #D_CACHE_LINE_SIZE subs r1, r1, #D_CACHE_LINE_SIZE bhi 1b -#endif mov pc, lr /* @@ -138,7 +136,7 @@ ENTRY(cpu_v6_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size .equ cpu_v6_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v6_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 78f520bc0e99..9704097c450e 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -110,7 +110,8 @@ ENTRY(cpu_v7_set_pte_ext) ARM( str r3, [r0, #2048]! ) THUMB( add r0, r0, #2048 ) THUMB( str r3, [r0] ) - mcr p15, 0, r0, c7, c10, 1 @ flush_pte + ALT_SMP(mov pc,lr) + ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr ENDPROC(cpu_v7_set_pte_ext) diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 6ffd78c0f9ab..363027e811d6 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -73,7 +73,8 @@ ENTRY(cpu_v7_set_pte_ext) tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] - mcr p15, 0, r0, c7, c10, 1 @ flush_pte + ALT_SMP(mov pc, lr) + ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr ENDPROC(cpu_v7_set_pte_ext) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3a3c015f8d5c..2c73a7301ff7 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -75,14 +75,14 @@ ENTRY(cpu_v7_do_idle) ENDPROC(cpu_v7_do_idle) ENTRY(cpu_v7_dcache_clean_area) -#ifndef TLB_CAN_READ_FROM_L1_CACHE + ALT_SMP(mov pc, lr) @ MP extensions imply L1 PTW + ALT_UP(W(nop)) dcache_line_size r2, r3 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, r2 subs r1, r1, r2 bhi 1b dsb -#endif mov pc, lr ENDPROC(cpu_v7_dcache_clean_area) @@ -402,6 +402,8 @@ __v7_ca9mp_proc_info: __v7_proc __v7_ca9mp_setup .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info +#endif /* CONFIG_ARM_LPAE */ + /* * Marvell PJ4B processor. */ @@ -411,7 +413,6 @@ __v7_pj4b_proc_info: .long 0xfffffff0 __v7_proc __v7_pj4b_setup .size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info -#endif /* CONFIG_ARM_LPAE */ /* * ARM Ltd. Cortex A7 processor. @@ -420,7 +421,7 @@ __v7_pj4b_proc_info: __v7_ca7mp_proc_info: .long 0x410fc070 .long 0xff0ffff0 - __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV + __v7_proc __v7_ca7mp_setup .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info /* @@ -430,10 +431,25 @@ __v7_ca7mp_proc_info: __v7_ca15mp_proc_info: .long 0x410fc0f0 .long 0xff0ffff0 - __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV + __v7_proc __v7_ca15mp_setup .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* + * Qualcomm Inc. Krait processors. + */ + .type __krait_proc_info, #object +__krait_proc_info: + .long 0x510f0400 @ Required ID value + .long 0xff0ffc00 @ Mask for ID + /* + * Some Krait processors don't indicate support for SDIV and UDIV + * instructions in the ARM instruction set, even though they actually + * do support them. + */ + __v7_proc __v7_setup, hwcaps = HWCAP_IDIV + .size __krait_proc_info, . - __krait_proc_info + + /* * Match any ARMv7 processor core. */ .type __v7_proc_info, #object diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index eb93d6487f35..e8efd83b6f25 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -413,7 +413,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .globl cpu_xsc3_suspend_size .equ cpu_xsc3_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 25510361aa18..e766f889bfd6 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -528,7 +528,7 @@ ENTRY(cpu_xscale_set_pte_ext) .globl cpu_xscale_suspend_size .equ cpu_xscale_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_xscale_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/kernel/tcm.h b/arch/arm/mm/tcm.h index 8015ad434a40..8015ad434a40 100644 --- a/arch/arm/kernel/tcm.h +++ b/arch/arm/mm/tcm.h diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index a0bd8a755bdf..1a643ee8e082 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -918,9 +918,8 @@ void bpf_jit_compile(struct sk_filter *fp) #endif if (bpf_jit_enable > 1) - print_hex_dump(KERN_INFO, "BPF JIT code: ", - DUMP_PREFIX_ADDRESS, 16, 4, ctx.target, - alloc_size, false); + /* there are 2 passes here */ + bpf_jit_dump(fp->len, alloc_size, 2, ctx.target); fp->bpf_func = (void *)ctx.target; out: diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index a82cecb84948..ad97400ba3ad 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -3,7 +3,11 @@ # ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-y += addr-map.o +obj-$(CONFIG_ARCH_MVEBU) += addr-map.o +obj-$(CONFIG_ARCH_KIRKWOOD) += addr-map.o +obj-$(CONFIG_ARCH_DOVE) += addr-map.o +obj-$(CONFIG_ARCH_ORION5X) += addr-map.o +obj-$(CONFIG_ARCH_MV78XX0) += addr-map.o orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 2d4b6414609f..251f827271e9 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -238,6 +238,7 @@ static __init void ge_complete( struct mv643xx_eth_shared_platform_data *orion_ge_shared_data, struct resource *orion_ge_resource, unsigned long irq, struct platform_device *orion_ge_shared, + struct platform_device *orion_ge_mvmdio, struct mv643xx_eth_platform_data *eth_data, struct platform_device *orion_ge) { @@ -247,6 +248,8 @@ static __init void ge_complete( orion_ge->dev.platform_data = eth_data; platform_device_register(orion_ge_shared); + if (orion_ge_mvmdio) + platform_device_register(orion_ge_mvmdio); platform_device_register(orion_ge); } @@ -258,8 +261,6 @@ struct mv643xx_eth_shared_platform_data orion_ge00_shared_data; static struct resource orion_ge00_shared_resources[] = { { .name = "ge00 base", - }, { - .name = "ge00 err irq", }, }; @@ -271,6 +272,19 @@ static struct platform_device orion_ge00_shared = { }, }; +static struct resource orion_ge_mvmdio_resources[] = { + { + .name = "ge00 mvmdio base", + }, { + .name = "ge00 mvmdio err irq", + }, +}; + +static struct platform_device orion_ge_mvmdio = { + .name = "orion-mdio", + .id = -1, +}; + static struct resource orion_ge00_resources[] = { { .name = "ge00 irq", @@ -295,26 +309,25 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, - mapbase + 0x2000, SZ_16K - 1, irq_err); + mapbase + 0x2000, SZ_16K - 1, NO_IRQ); + fill_resources(&orion_ge_mvmdio, orion_ge_mvmdio_resources, + mapbase + 0x2004, 0x84 - 1, irq_err); orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, + &orion_ge_mvmdio, eth_data, &orion_ge00); } /***************************************************************************** * GE01 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data orion_ge01_shared_data = { - .shared_smi = &orion_ge00_shared, -}; +struct mv643xx_eth_shared_platform_data orion_ge01_shared_data; static struct resource orion_ge01_shared_resources[] = { { .name = "ge01 base", - }, { - .name = "ge01 err irq", - }, + } }; static struct platform_device orion_ge01_shared = { @@ -349,26 +362,23 @@ void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, - mapbase + 0x2000, SZ_16K - 1, irq_err); + mapbase + 0x2000, SZ_16K - 1, NO_IRQ); orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, + NULL, eth_data, &orion_ge01); } /***************************************************************************** * GE10 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data orion_ge10_shared_data = { - .shared_smi = &orion_ge00_shared, -}; +struct mv643xx_eth_shared_platform_data orion_ge10_shared_data; static struct resource orion_ge10_shared_resources[] = { { .name = "ge10 base", - }, { - .name = "ge10 err irq", - }, + } }; static struct platform_device orion_ge10_shared = { @@ -402,24 +412,21 @@ void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long irq_err) { fill_resources(&orion_ge10_shared, orion_ge10_shared_resources, - mapbase + 0x2000, SZ_16K - 1, irq_err); + mapbase + 0x2000, SZ_16K - 1, NO_IRQ); ge_complete(&orion_ge10_shared_data, orion_ge10_resources, irq, &orion_ge10_shared, + NULL, eth_data, &orion_ge10); } /***************************************************************************** * GE11 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data orion_ge11_shared_data = { - .shared_smi = &orion_ge00_shared, -}; +struct mv643xx_eth_shared_platform_data orion_ge11_shared_data; static struct resource orion_ge11_shared_resources[] = { { .name = "ge11 base", - }, { - .name = "ge11 err irq", }, }; @@ -454,9 +461,10 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, unsigned long irq_err) { fill_resources(&orion_ge11_shared, orion_ge11_shared_resources, - mapbase + 0x2000, SZ_16K - 1, irq_err); + mapbase + 0x2000, SZ_16K - 1, NO_IRQ); ge_complete(&orion_ge11_shared_data, orion_ge11_resources, irq, &orion_ge11_shared, + NULL, eth_data, &orion_ge11); } diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index f20a321088a2..8b8c06d2e9c4 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -120,12 +120,14 @@ void __init orion_pcie_reset(void __iomem *base) * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks * WIN[0-3] -> DRAM bank[0-3] */ -static void __init orion_pcie_setup_wins(void __iomem *base, - struct mbus_dram_target_info *dram) +static void __init orion_pcie_setup_wins(void __iomem *base) { + const struct mbus_dram_target_info *dram; u32 size; int i; + dram = mv_mbus_dram_info(); + /* * First, disable and clear BARs and windows. */ @@ -150,7 +152,7 @@ static void __init orion_pcie_setup_wins(void __iomem *base, */ size = 0; for (i = 0; i < dram->num_cs; i++) { - struct mbus_dram_window *cs = dram->cs + i; + const struct mbus_dram_window *cs = dram->cs + i; writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i)); writel(0, base + PCIE_WIN04_REMAP_OFF(i)); @@ -184,7 +186,7 @@ void __init orion_pcie_setup(void __iomem *base) /* * Point PCIe unit MBUS decode windows to DRAM space. */ - orion_pcie_setup_wins(base, &orion_mbus_dram_info); + orion_pcie_setup_wins(base); /* * Master + slave enable. diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 6cb19c6aa9d6..54d186106f9f 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -37,14 +37,6 @@ if PLAT_SAMSUNG comment "Boot options" -config S3C_BOOT_WATCHDOG - bool "S3C Initialisation watchdog" - depends on S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - config S3C_BOOT_ERROR_RESET bool "S3C Reboot on decompression error" help @@ -125,12 +117,6 @@ config SAMSUNG_GPIOLIB_4BIT configuration. GPIOlib shall be compiled only for S3C64XX and S5P series of processors. -config S3C_GPIO_CFG_S3C64XX - bool - help - Internal configuration to enable S3C64XX style GPIO configuration - functions. - config S5P_GPIO_DRVSTR bool help diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 4cf660e38182..30c2fe243f76 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <linux/amba/pl330.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -62,7 +63,6 @@ #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/usb-phy.h> -#include <plat/regs-iic.h> #include <plat/regs-serial.h> #include <plat/regs-spi.h> #include <linux/platform_data/spi-s3c64xx.h> @@ -146,14 +146,20 @@ struct platform_device s3c_device_camif = { /* ASOC DMA */ +#ifdef CONFIG_PLAT_S5P +static struct resource samsung_asoc_idma_resource = DEFINE_RES_IRQ(IRQ_I2S0); + struct platform_device samsung_asoc_idma = { .name = "samsung-idma", .id = -1, + .num_resources = 1, + .resource = &samsung_asoc_idma_resource, .dev = { .dma_mask = &samsung_device_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), } }; +#endif /* FB */ @@ -1507,6 +1513,9 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } @@ -1545,6 +1554,9 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } @@ -1583,6 +1595,9 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); } diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 71d58ddea9c1..ec0d731b0e7b 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -23,23 +23,15 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, struct device *dev, char *ch_name) { dma_cap_mask_t mask; - void *filter_param; dma_cap_zero(mask); dma_cap_set(param->cap, mask); - /* - * If a dma channel property of a device node from device tree is - * specified, use that as the fliter parameter. - */ - filter_param = (dma_ch == DMACH_DT_PROP) ? - (void *)param->dt_dmach_prop : (void *)dma_ch; - if (dev->of_node) return (unsigned)dma_request_slave_channel(dev, ch_name); else return (unsigned)dma_request_channel(mask, pl330_filter, - filter_param); + (void *)dma_ch); } static int samsung_dmadev_release(unsigned ch, void *param) diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 114178268b75..ce6d7634b6cb 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -18,7 +18,6 @@ struct samsung_dma_req { enum dma_transaction_type cap; - struct property *dt_dmach_prop; struct s3c2410_dma_client *client; }; diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index d384a8016b47..abe07fae71db 100644 --- a/arch/arm/plat-samsung/include/plat/dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -21,7 +21,6 @@ * use these just as IDs. */ enum dma_ch { - DMACH_DT_PROP = -1, DMACH_UART0_RX = 0, DMACH_UART0_TX, DMACH_UART1_RX, diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index b885322717a1..9ae507270785 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -15,55 +15,7 @@ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ -/* S3C_FB_MAX_WIN - * Set to the maximum number of windows that any of the supported hardware - * can use. Since the platform data uses this for an array size, having it - * set to the maximum of any version of the hardware can do is safe. - */ -#define S3C_FB_MAX_WIN (5) - -/** - * struct s3c_fb_pd_win - per window setup data - * @xres : The window X size. - * @yres : The window Y size. - * @virtual_x: The virtual X size. - * @virtual_y: The virtual Y size. - */ -struct s3c_fb_pd_win { - unsigned short default_bpp; - unsigned short max_bpp; - unsigned short xres; - unsigned short yres; - unsigned short virtual_x; - unsigned short virtual_y; -}; - -/** - * struct s3c_fb_platdata - S3C driver platform specific information - * @setup_gpio: Setup the external GPIO pins to the right state to transfer - * the data from the display system to the connected display - * device. - * @vidcon0: The base vidcon0 values to control the panel data format. - * @vidcon1: The base vidcon1 values to control the panel data output. - * @vtiming: Video timing when connected to a RGB type panel. - * @win: The setup data for each hardware window, or NULL for unused. - * @display_mode: The LCD output display mode. - * - * The platform data supplies the video driver with all the information - * it requires to work with the display(s) attached to the machine. It - * controls the initial mode, the number of display windows (0 is always - * the base framebuffer) that are initialised etc. - * - */ -struct s3c_fb_platdata { - void (*setup_gpio)(void); - - struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; - struct fb_videomode *vtiming; - - u32 vidcon0; - u32 vidcon1; -}; +#include <linux/platform_data/video_s3c.h> /** * s3c_fb_set_platdata() - Setup the FB device with platform data. diff --git a/arch/arm/plat-samsung/include/plat/regs-ac97.h b/arch/arm/plat-samsung/include/plat/regs-ac97.h deleted file mode 100644 index c3878f7acb83..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-ac97.h +++ /dev/null @@ -1,67 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h - * - * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 AC97 Controller -*/ - -#ifndef __ASM_ARCH_REGS_AC97_H -#define __ASM_ARCH_REGS_AC97_H __FILE__ - -#define S3C_AC97_GLBCTRL (0x00) - -#define S3C_AC97_GLBCTRL_CODECREADYIE (1<<22) -#define S3C_AC97_GLBCTRL_PCMOUTURIE (1<<21) -#define S3C_AC97_GLBCTRL_PCMINORIE (1<<20) -#define S3C_AC97_GLBCTRL_MICINORIE (1<<19) -#define S3C_AC97_GLBCTRL_PCMOUTTIE (1<<18) -#define S3C_AC97_GLBCTRL_PCMINTIE (1<<17) -#define S3C_AC97_GLBCTRL_MICINTIE (1<<16) -#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF (0<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO (1<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA (2<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK (3<<12) -#define S3C_AC97_GLBCTRL_PCMINTM_OFF (0<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_PIO (1<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_DMA (2<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_MASK (3<<10) -#define S3C_AC97_GLBCTRL_MICINTM_OFF (0<<8) -#define S3C_AC97_GLBCTRL_MICINTM_PIO (1<<8) -#define S3C_AC97_GLBCTRL_MICINTM_DMA (2<<8) -#define S3C_AC97_GLBCTRL_MICINTM_MASK (3<<8) -#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE (1<<3) -#define S3C_AC97_GLBCTRL_ACLINKON (1<<2) -#define S3C_AC97_GLBCTRL_WARMRESET (1<<1) -#define S3C_AC97_GLBCTRL_COLDRESET (1<<0) - -#define S3C_AC97_GLBSTAT (0x04) - -#define S3C_AC97_GLBSTAT_CODECREADY (1<<22) -#define S3C_AC97_GLBSTAT_PCMOUTUR (1<<21) -#define S3C_AC97_GLBSTAT_PCMINORI (1<<20) -#define S3C_AC97_GLBSTAT_MICINORI (1<<19) -#define S3C_AC97_GLBSTAT_PCMOUTTI (1<<18) -#define S3C_AC97_GLBSTAT_PCMINTI (1<<17) -#define S3C_AC97_GLBSTAT_MICINTI (1<<16) -#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE (0<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_INIT (1<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_READY (2<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE (3<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_LP (4<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_WARM (5<<0) - -#define S3C_AC97_CODEC_CMD (0x08) - -#define S3C_AC97_CODEC_CMD_READ (1<<23) - -#define S3C_AC97_STAT (0x0c) -#define S3C_AC97_PCM_ADDR (0x10) -#define S3C_AC97_PCM_DATA (0x18) -#define S3C_AC97_MIC_DATA (0x1C) - -#endif /* __ASM_ARCH_REGS_AC97_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h deleted file mode 100644 index 2f7c17de8ac8..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-iic.h +++ /dev/null @@ -1,56 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-iic.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 I2C Controller -*/ - -#ifndef __ASM_ARCH_REGS_IIC_H -#define __ASM_ARCH_REGS_IIC_H __FILE__ - -/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ - -#define S3C2410_IICREG(x) (x) - -#define S3C2410_IICCON S3C2410_IICREG(0x00) -#define S3C2410_IICSTAT S3C2410_IICREG(0x04) -#define S3C2410_IICADD S3C2410_IICREG(0x08) -#define S3C2410_IICDS S3C2410_IICREG(0x0C) -#define S3C2440_IICLC S3C2410_IICREG(0x10) - -#define S3C2410_IICCON_ACKEN (1<<7) -#define S3C2410_IICCON_TXDIV_16 (0<<6) -#define S3C2410_IICCON_TXDIV_512 (1<<6) -#define S3C2410_IICCON_IRQEN (1<<5) -#define S3C2410_IICCON_IRQPEND (1<<4) -#define S3C2410_IICCON_SCALE(x) ((x)&15) -#define S3C2410_IICCON_SCALEMASK (0xf) - -#define S3C2410_IICSTAT_MASTER_RX (2<<6) -#define S3C2410_IICSTAT_MASTER_TX (3<<6) -#define S3C2410_IICSTAT_SLAVE_RX (0<<6) -#define S3C2410_IICSTAT_SLAVE_TX (1<<6) -#define S3C2410_IICSTAT_MODEMASK (3<<6) - -#define S3C2410_IICSTAT_START (1<<5) -#define S3C2410_IICSTAT_BUSBUSY (1<<5) -#define S3C2410_IICSTAT_TXRXEN (1<<4) -#define S3C2410_IICSTAT_ARBITR (1<<3) -#define S3C2410_IICSTAT_ASSLAVE (1<<2) -#define S3C2410_IICSTAT_ADDR0 (1<<1) -#define S3C2410_IICSTAT_LASTBIT (1<<0) - -#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) -#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) -#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) -#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) -#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) - -#define S3C2410_IICLC_FILTER_ON (1<<2) - -#endif /* __ASM_ARCH_REGS_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-iis.h b/arch/arm/plat-samsung/include/plat/regs-iis.h deleted file mode 100644 index a18d35e7a735..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-iis.h +++ /dev/null @@ -1,70 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/regs-iis.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_IIS_H -#define __ASM_ARCH_REGS_IIS_H - -#define S3C2410_IISCON (0x00) - -#define S3C2410_IISCON_LRINDEX (1 << 8) -#define S3C2410_IISCON_TXFIFORDY (1 << 7) -#define S3C2410_IISCON_RXFIFORDY (1 << 6) -#define S3C2410_IISCON_TXDMAEN (1 << 5) -#define S3C2410_IISCON_RXDMAEN (1 << 4) -#define S3C2410_IISCON_TXIDLE (1 << 3) -#define S3C2410_IISCON_RXIDLE (1 << 2) -#define S3C2410_IISCON_PSCEN (1 << 1) -#define S3C2410_IISCON_IISEN (1 << 0) - -#define S3C2410_IISMOD (0x04) - -#define S3C2440_IISMOD_MPLL (1 << 9) -#define S3C2410_IISMOD_SLAVE (1 << 8) -#define S3C2410_IISMOD_NOXFER (0 << 6) -#define S3C2410_IISMOD_RXMODE (1 << 6) -#define S3C2410_IISMOD_TXMODE (2 << 6) -#define S3C2410_IISMOD_TXRXMODE (3 << 6) -#define S3C2410_IISMOD_LR_LLOW (0 << 5) -#define S3C2410_IISMOD_LR_RLOW (1 << 5) -#define S3C2410_IISMOD_IIS (0 << 4) -#define S3C2410_IISMOD_MSB (1 << 4) -#define S3C2410_IISMOD_8BIT (0 << 3) -#define S3C2410_IISMOD_16BIT (1 << 3) -#define S3C2410_IISMOD_BITMASK (1 << 3) -#define S3C2410_IISMOD_256FS (0 << 2) -#define S3C2410_IISMOD_384FS (1 << 2) -#define S3C2410_IISMOD_16FS (0 << 0) -#define S3C2410_IISMOD_32FS (1 << 0) -#define S3C2410_IISMOD_48FS (2 << 0) -#define S3C2410_IISMOD_FS_MASK (3 << 0) - -#define S3C2410_IISPSR (0x08) - -#define S3C2410_IISPSR_INTMASK (31 << 5) -#define S3C2410_IISPSR_INTSHIFT (5) -#define S3C2410_IISPSR_EXTMASK (31 << 0) -#define S3C2410_IISPSR_EXTSHFIT (0) - -#define S3C2410_IISFCON (0x0c) - -#define S3C2410_IISFCON_TXDMA (1 << 15) -#define S3C2410_IISFCON_RXDMA (1 << 14) -#define S3C2410_IISFCON_TXENABLE (1 << 13) -#define S3C2410_IISFCON_RXENABLE (1 << 12) -#define S3C2410_IISFCON_TXMASK (0x3f << 6) -#define S3C2410_IISFCON_TXSHIFT (6) -#define S3C2410_IISFCON_RXMASK (0x3f) -#define S3C2410_IISFCON_RXSHIFT (0) - -#define S3C2410_IISFIFO (0x10) - -#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 29c26a818842..f05f2afa440d 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -1,281 +1 @@ -/* arch/arm/plat-samsung/include/plat/regs-serial.h - * - * From linux/include/asm-arm/hardware/serial_s3c2410.h - * - * Internal header file for Samsung S3C2410 serial ports (UART0-2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) - * - * Adapted from: - * - * Internal header file for MX1ADS serial ports (UART1 & 2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef __ASM_ARM_REGS_SERIAL_H -#define __ASM_ARM_REGS_SERIAL_H - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -#define S3C2410_PA_UART0 (S3C24XX_PA_UART) -#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) -#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) -#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) - -#define S3C2410_URXH (0x24) -#define S3C2410_UTXH (0x20) -#define S3C2410_ULCON (0x00) -#define S3C2410_UCON (0x04) -#define S3C2410_UFCON (0x08) -#define S3C2410_UMCON (0x0C) -#define S3C2410_UBRDIV (0x28) -#define S3C2410_UTRSTAT (0x10) -#define S3C2410_UERSTAT (0x14) -#define S3C2410_UFSTAT (0x18) -#define S3C2410_UMSTAT (0x1C) - -#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) - -#define S3C2410_LCON_CS5 (0x0) -#define S3C2410_LCON_CS6 (0x1) -#define S3C2410_LCON_CS7 (0x2) -#define S3C2410_LCON_CS8 (0x3) -#define S3C2410_LCON_CSMASK (0x3) - -#define S3C2410_LCON_PNONE (0x0) -#define S3C2410_LCON_PEVEN (0x5 << 3) -#define S3C2410_LCON_PODD (0x4 << 3) -#define S3C2410_LCON_PMASK (0x7 << 3) - -#define S3C2410_LCON_STOPB (1<<2) -#define S3C2410_LCON_IRM (1<<6) - -#define S3C2440_UCON_CLKMASK (3<<10) -#define S3C2440_UCON_CLKSHIFT (10) -#define S3C2440_UCON_PCLK (0<<10) -#define S3C2440_UCON_UCLK (1<<10) -#define S3C2440_UCON_PCLK2 (2<<10) -#define S3C2440_UCON_FCLK (3<<10) -#define S3C2443_UCON_EPLL (3<<10) - -#define S3C6400_UCON_CLKMASK (3<<10) -#define S3C6400_UCON_CLKSHIFT (10) -#define S3C6400_UCON_PCLK (0<<10) -#define S3C6400_UCON_PCLK2 (2<<10) -#define S3C6400_UCON_UCLK0 (1<<10) -#define S3C6400_UCON_UCLK1 (3<<10) - -#define S3C2440_UCON2_FCLK_EN (1<<15) -#define S3C2440_UCON0_DIVMASK (15 << 12) -#define S3C2440_UCON1_DIVMASK (15 << 12) -#define S3C2440_UCON2_DIVMASK (7 << 12) -#define S3C2440_UCON_DIVSHIFT (12) - -#define S3C2412_UCON_CLKMASK (3<<10) -#define S3C2412_UCON_CLKSHIFT (10) -#define S3C2412_UCON_UCLK (1<<10) -#define S3C2412_UCON_USYSCLK (3<<10) -#define S3C2412_UCON_PCLK (0<<10) -#define S3C2412_UCON_PCLK2 (2<<10) - -#define S3C2410_UCON_CLKMASK (1 << 10) -#define S3C2410_UCON_CLKSHIFT (10) -#define S3C2410_UCON_UCLK (1<<10) -#define S3C2410_UCON_SBREAK (1<<4) - -#define S3C2410_UCON_TXILEVEL (1<<9) -#define S3C2410_UCON_RXILEVEL (1<<8) -#define S3C2410_UCON_TXIRQMODE (1<<2) -#define S3C2410_UCON_RXIRQMODE (1<<0) -#define S3C2410_UCON_RXFIFO_TOI (1<<7) -#define S3C2443_UCON_RXERR_IRQEN (1<<6) -#define S3C2443_UCON_LOOPBACK (1<<5) - -#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI) - -#define S3C2410_UFCON_FIFOMODE (1<<0) -#define S3C2410_UFCON_TXTRIG0 (0<<6) -#define S3C2410_UFCON_RXTRIG8 (1<<4) -#define S3C2410_UFCON_RXTRIG12 (2<<4) - -/* S3C2440 FIFO trigger levels */ -#define S3C2440_UFCON_RXTRIG1 (0<<4) -#define S3C2440_UFCON_RXTRIG8 (1<<4) -#define S3C2440_UFCON_RXTRIG16 (2<<4) -#define S3C2440_UFCON_RXTRIG32 (3<<4) - -#define S3C2440_UFCON_TXTRIG0 (0<<6) -#define S3C2440_UFCON_TXTRIG16 (1<<6) -#define S3C2440_UFCON_TXTRIG32 (2<<6) -#define S3C2440_UFCON_TXTRIG48 (3<<6) - -#define S3C2410_UFCON_RESETBOTH (3<<1) -#define S3C2410_UFCON_RESETTX (1<<2) -#define S3C2410_UFCON_RESETRX (1<<1) - -#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2410_UFCON_TXTRIG0 | \ - S3C2410_UFCON_RXTRIG8 ) - -#define S3C2410_UMCOM_AFC (1<<4) -#define S3C2410_UMCOM_RTS_LOW (1<<0) - -#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ -#define S3C2412_UMCON_AFC_56 (1<<5) -#define S3C2412_UMCON_AFC_48 (2<<5) -#define S3C2412_UMCON_AFC_40 (3<<5) -#define S3C2412_UMCON_AFC_32 (4<<5) -#define S3C2412_UMCON_AFC_24 (5<<5) -#define S3C2412_UMCON_AFC_16 (6<<5) -#define S3C2412_UMCON_AFC_8 (7<<5) - -#define S3C2410_UFSTAT_TXFULL (1<<9) -#define S3C2410_UFSTAT_RXFULL (1<<8) -#define S3C2410_UFSTAT_TXMASK (15<<4) -#define S3C2410_UFSTAT_TXSHIFT (4) -#define S3C2410_UFSTAT_RXMASK (15<<0) -#define S3C2410_UFSTAT_RXSHIFT (0) - -/* UFSTAT S3C2443 same as S3C2440 */ -#define S3C2440_UFSTAT_TXFULL (1<<14) -#define S3C2440_UFSTAT_RXFULL (1<<6) -#define S3C2440_UFSTAT_TXSHIFT (8) -#define S3C2440_UFSTAT_RXSHIFT (0) -#define S3C2440_UFSTAT_TXMASK (63<<8) -#define S3C2440_UFSTAT_RXMASK (63) - -#define S3C2410_UTRSTAT_TXE (1<<2) -#define S3C2410_UTRSTAT_TXFE (1<<1) -#define S3C2410_UTRSTAT_RXDR (1<<0) - -#define S3C2410_UERSTAT_OVERRUN (1<<0) -#define S3C2410_UERSTAT_FRAME (1<<2) -#define S3C2410_UERSTAT_BREAK (1<<3) -#define S3C2443_UERSTAT_PARITY (1<<1) - -#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ - S3C2410_UERSTAT_FRAME | \ - S3C2410_UERSTAT_BREAK) - -#define S3C2410_UMSTAT_CTS (1<<0) -#define S3C2410_UMSTAT_DeltaCTS (1<<2) - -#define S3C2443_DIVSLOT (0x2C) - -/* S3C64XX interrupt registers. */ -#define S3C64XX_UINTP 0x30 -#define S3C64XX_UINTSP 0x34 -#define S3C64XX_UINTM 0x38 - -#define S3C64XX_UINTM_RXD (0) -#define S3C64XX_UINTM_TXD (2) -#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) -#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) - -/* Following are specific to S5PV210 */ -#define S5PV210_UCON_CLKMASK (1<<10) -#define S5PV210_UCON_CLKSHIFT (10) -#define S5PV210_UCON_PCLK (0<<10) -#define S5PV210_UCON_UCLK (1<<10) - -#define S5PV210_UFCON_TXTRIG0 (0<<8) -#define S5PV210_UFCON_TXTRIG4 (1<<8) -#define S5PV210_UFCON_TXTRIG8 (2<<8) -#define S5PV210_UFCON_TXTRIG16 (3<<8) -#define S5PV210_UFCON_TXTRIG32 (4<<8) -#define S5PV210_UFCON_TXTRIG64 (5<<8) -#define S5PV210_UFCON_TXTRIG128 (6<<8) -#define S5PV210_UFCON_TXTRIG256 (7<<8) - -#define S5PV210_UFCON_RXTRIG1 (0<<4) -#define S5PV210_UFCON_RXTRIG4 (1<<4) -#define S5PV210_UFCON_RXTRIG8 (2<<4) -#define S5PV210_UFCON_RXTRIG16 (3<<4) -#define S5PV210_UFCON_RXTRIG32 (4<<4) -#define S5PV210_UFCON_RXTRIG64 (5<<4) -#define S5PV210_UFCON_RXTRIG128 (6<<4) -#define S5PV210_UFCON_RXTRIG256 (7<<4) - -#define S5PV210_UFSTAT_TXFULL (1<<24) -#define S5PV210_UFSTAT_RXFULL (1<<8) -#define S5PV210_UFSTAT_TXMASK (255<<16) -#define S5PV210_UFSTAT_TXSHIFT (16) -#define S5PV210_UFSTAT_RXMASK (255<<0) -#define S5PV210_UFSTAT_RXSHIFT (0) - -#define S3C2410_UCON_CLKSEL0 (1 << 0) -#define S3C2410_UCON_CLKSEL1 (1 << 1) -#define S3C2410_UCON_CLKSEL2 (1 << 2) -#define S3C2410_UCON_CLKSEL3 (1 << 3) - -/* Default values for s5pv210 UCON and UFCON uart registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -#ifndef __ASSEMBLY__ - -/* configuration structure for per-machine configurations for the - * serial port - * - * the pointer is setup by the machine specific initialisation from the - * arch/arm/mach-s3c2410/ directory. -*/ - -struct s3c2410_uartcfg { - unsigned char hwport; /* hardware port number */ - unsigned char unused; - unsigned short flags; - upf_t uart_flags; /* default uart flags */ - unsigned int clk_sel; - - unsigned int has_fracval; - - unsigned long ucon; /* value of ucon for port */ - unsigned long ulcon; /* value of ulcon for port */ - unsigned long ufcon; /* value of ufcon for port */ -}; - -/* s3c24xx_uart_devs - * - * this is exported from the core as we cannot use driver_register(), - * or platform_add_device() before the console_initcall() -*/ - -extern struct platform_device *s3c24xx_uart_devs[4]; - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARM_REGS_SERIAL_H */ - +#include <linux/serial_s3c.h> diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/plat-samsung/include/plat/rtc-core.h index 21d8594d37ca..7b542f7b7938 100644 --- a/arch/arm/plat-samsung/include/plat/rtc-core.h +++ b/arch/arm/plat-samsung/include/plat/rtc-core.h @@ -19,7 +19,7 @@ /* re-define device name depending on support. */ static inline void s3c_rtc_setname(char *name) { -#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) +#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) s3c_device_rtc.name = name; #endif } diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 1e0aab08c13f..ce1d0f785efd 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -153,7 +153,7 @@ static inline void s3c6400_default_sdhci2(void) { } /* S5P64X0 SDHCI setup */ -#ifdef CONFIG_S5P64X0_SETUP_SDHCI +#ifdef CONFIG_S5P64X0_SETUP_SDHCI_GPIO static inline void s5p64x0_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC @@ -188,7 +188,7 @@ static inline void s5p64x0_default_sdhci1(void) { } static inline void s5p6440_default_sdhci2(void) { } static inline void s5p6450_default_sdhci2(void) { } -#endif /* CONFIG_S5P64X0_SETUP_SDHCI */ +#endif /* CONFIG_S5P64X0_SETUP_SDHCI_GPIO */ /* S5PC100 SDHCI setup */ diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 959bcdb03a25..ab34dfadb7f9 100644 --- a/arch/arm/plat-samsung/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -11,10 +11,7 @@ #ifndef __PLAT_SAMSUNG_USB_PHY_H #define __PLAT_SAMSUNG_USB_PHY_H __FILE__ -enum s5p_usb_phy_type { - S5P_USB_PHY_DEVICE, - S5P_USB_PHY_HOST, -}; +#include <linux/usb/samsung_usb_phy.h> extern int s5p_usb_phy_init(struct platform_device *pdev, int type); extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index 1113066240cf..0fceb4273824 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <mach/map.h> @@ -24,8 +25,6 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> -#include <asm/mach/irq.h> - static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c index bae56131a50a..fafdb059043a 100644 --- a/arch/arm/plat-samsung/s5p-irq-gpioint.c +++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -22,8 +23,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> -#include <asm/mach/irq.h> - #define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u)) #define CON_OFFSET 0x700 diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S index bdf6dadf8790..a030e7301da8 100644 --- a/arch/arm/plat-samsung/s5p-sleep.S +++ b/arch/arm/plat-samsung/s5p-sleep.S @@ -25,6 +25,9 @@ #include <asm/asm-offsets.h> #include <asm/hardware/cache-l2x0.h> +#define CPU_MASK 0xff0ffff0 +#define CPU_CORTEX_A9 0x410fc090 + /* * The following code is located into the .data section. This is to * allow l2x0_regs_phys to be accessed with a relative load while we @@ -51,6 +54,12 @@ ENTRY(s3c_cpu_resume) #ifdef CONFIG_CACHE_L2X0 + mrc p15, 0, r0, c0, c0, 0 + ldr r1, =CPU_MASK + and r0, r0, r1 + ldr r1, =CPU_CORTEX_A9 + cmp r0, r1 + bne resume_l2on adr r0, l2x0_regs_phys ldr r0, [r0] ldr r1, [r0, #L2X0_R_PHY_BASE] diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c index 147459327601..66df315990a7 100644 --- a/arch/arm/plat-samsung/setup-mipiphy.c +++ b/arch/arm/plat-samsung/setup-mipiphy.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/export.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -50,8 +51,10 @@ int s5p_csis_phy_enable(int id, bool on) { return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN); } +EXPORT_SYMBOL(s5p_csis_phy_enable); int s5p_dsim_phy_enable(struct platform_device *pdev, bool on) { return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN); } +EXPORT_SYMBOL(s5p_dsim_phy_enable); diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig deleted file mode 100644 index 8a08c31b5e20..000000000000 --- a/arch/arm/plat-spear/Kconfig +++ /dev/null @@ -1,47 +0,0 @@ -# -# SPEAr Platform configuration file -# - -if PLAT_SPEAR - -choice - prompt "ST SPEAr Family" - default ARCH_SPEAR3XX - -config ARCH_SPEAR13XX - bool "ST SPEAr13xx with Device Tree" - select ARCH_HAS_CPUFREQ - select ARM_GIC - select CPU_V7 - select GPIO_SPEAR_SPICS - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select PINCTRL - select USE_OF - help - Supports for ARM's SPEAR13XX family - -config ARCH_SPEAR3XX - bool "ST SPEAr3xx with Device Tree" - select ARM_VIC - select CPU_ARM926T - select PINCTRL - select USE_OF - help - Supports for ARM's SPEAR3XX family - -config ARCH_SPEAR6XX - bool "SPEAr6XX" - select ARM_VIC - select CPU_ARM926T - help - Supports for ARM's SPEAR6XX family - -endchoice - -# Adding SPEAr machine specific configuration files -source "arch/arm/mach-spear13xx/Kconfig" -source "arch/arm/mach-spear3xx/Kconfig" -source "arch/arm/mach-spear6xx/Kconfig" - -endif diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile deleted file mode 100644 index 01e88532a5db..000000000000 --- a/arch/arm/plat-spear/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# SPEAr Platform specific Makefile -# - -# Common support -obj-y := restart.o time.o - -obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o -obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index f2ac15561778..1e1b2d769748 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -14,7 +14,6 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -37,13 +36,6 @@ static DEFINE_SPINLOCK(boot_lock); void __cpuinit versatile_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 831e1fdfdb2f..a10297da122b 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -16,7 +16,7 @@ # are merged into mainline or have been edited in the machine database # within the last 12 months. References to machine_is_NAME() do not count! # -# Last update: Thu Apr 26 08:44:23 2012 +# Last update: Fri Mar 22 17:24:50 2013 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -64,8 +64,8 @@ h7201 ARCH_H7201 H7201 161 h7202 ARCH_H7202 H7202 162 iq80321 ARCH_IQ80321 IQ80321 169 ks8695 ARCH_KS8695 KS8695 180 -karo ARCH_KARO KARO 190 smdk2410 ARCH_SMDK2410 SMDK2410 193 +ceiva ARCH_CEIVA CEIVA 200 voiceblue MACH_VOICEBLUE VOICEBLUE 218 h5400 ARCH_H5400 H5400 220 omap_innovator MACH_OMAP_INNOVATOR OMAP_INNOVATOR 234 @@ -95,6 +95,7 @@ lpd7a400 MACH_LPD7A400 LPD7A400 389 lpd7a404 MACH_LPD7A404 LPD7A404 390 csb337 MACH_CSB337 CSB337 399 mainstone MACH_MAINSTONE MAINSTONE 406 +lite300 MACH_LITE300 LITE300 408 xcep MACH_XCEP XCEP 413 arcom_vulcan MACH_ARCOM_VULCAN ARCOM_VULCAN 414 nomadik MACH_NOMADIK NOMADIK 420 @@ -131,12 +132,14 @@ kb9200 MACH_KB9200 KB9200 612 sx1 MACH_SX1 SX1 613 ixdp465 MACH_IXDP465 IXDP465 618 ixdp2351 MACH_IXDP2351 IXDP2351 619 +cm4008 MACH_CM4008 CM4008 624 iq80332 MACH_IQ80332 IQ80332 629 gtwx5715 MACH_GTWX5715 GTWX5715 641 csb637 MACH_CSB637 CSB637 648 n30 MACH_N30 N30 656 nec_mp900 MACH_NEC_MP900 NEC_MP900 659 kafa MACH_KAFA KAFA 662 +cm41xx MACH_CM41XX CM41XX 672 ts72xx MACH_TS72XX TS72XX 673 otom MACH_OTOM OTOM 680 nexcoder_2440 MACH_NEXCODER_2440 NEXCODER_2440 681 @@ -149,6 +152,7 @@ colibri MACH_COLIBRI COLIBRI 729 gateway7001 MACH_GATEWAY7001 GATEWAY7001 731 pcm027 MACH_PCM027 PCM027 732 anubis MACH_ANUBIS ANUBIS 734 +xboardgp8 MACH_XBOARDGP8 XBOARDGP8 742 akita MACH_AKITA AKITA 744 e330 MACH_E330 E330 753 nokia770 MACH_NOKIA770 NOKIA770 755 @@ -157,9 +161,11 @@ edb9315a MACH_EDB9315A EDB9315A 772 stargate2 MACH_STARGATE2 STARGATE2 774 intelmote2 MACH_INTELMOTE2 INTELMOTE2 775 trizeps4 MACH_TRIZEPS4 TRIZEPS4 776 +pnx4008 MACH_PNX4008 PNX4008 782 cpuat91 MACH_CPUAT91 CPUAT91 787 iq81340sc MACH_IQ81340SC IQ81340SC 799 iq81340mc MACH_IQ81340MC IQ81340MC 801 +se4200 MACH_SE4200 SE4200 809 micro9 MACH_MICRO9 MICRO9 811 micro9l MACH_MICRO9L MICRO9L 812 omap_palmte MACH_OMAP_PALMTE OMAP_PALMTE 817 @@ -178,6 +184,7 @@ mx21ads MACH_MX21ADS MX21ADS 851 ams_delta MACH_AMS_DELTA AMS_DELTA 862 nas100d MACH_NAS100D NAS100D 865 magician MACH_MAGICIAN MAGICIAN 875 +cm4002 MACH_CM4002 CM4002 876 nxdkn MACH_NXDKN NXDKN 880 palmtx MACH_PALMTX PALMTX 885 s3c2413 MACH_S3C2413 S3C2413 887 @@ -203,7 +210,6 @@ omap_fsample MACH_OMAP_FSAMPLE OMAP_FSAMPLE 970 snapper_cl15 MACH_SNAPPER_CL15 SNAPPER_CL15 986 omap_palmz71 MACH_OMAP_PALMZ71 OMAP_PALMZ71 993 smdk2412 MACH_SMDK2412 SMDK2412 1009 -bkde303 MACH_BKDE303 BKDE303 1021 smdk2413 MACH_SMDK2413 SMDK2413 1022 aml_m5900 MACH_AML_M5900 AML_M5900 1024 balloon3 MACH_BALLOON3 BALLOON3 1029 @@ -214,6 +220,7 @@ fsg MACH_FSG FSG 1091 at91sam9260ek MACH_AT91SAM9260EK AT91SAM9260EK 1099 glantank MACH_GLANTANK GLANTANK 1100 n2100 MACH_N2100 N2100 1101 +im42xx MACH_IM42XX IM42XX 1105 qt2410 MACH_QT2410 QT2410 1108 kixrp435 MACH_KIXRP435 KIXRP435 1109 cc9p9360dev MACH_CC9P9360DEV CC9P9360DEV 1114 @@ -247,6 +254,7 @@ csb726 MACH_CSB726 CSB726 1359 davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380 davinci_dm355_evm MACH_DAVINCI_DM355_EVM DAVINCI_DM355_EVM 1381 littleton MACH_LITTLETON LITTLETON 1388 +im4004 MACH_IM4004 IM4004 1400 realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407 mx27_3ds MACH_MX27_3DS MX27_3DS 1430 halibut MACH_HALIBUT HALIBUT 1439 @@ -268,6 +276,7 @@ dns323 MACH_DNS323 DNS323 1542 omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546 nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548 pcm038 MACH_PCM038 PCM038 1551 +sg310 MACH_SG310 SG310 1564 ts209 MACH_TS209 TS209 1565 at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 @@ -371,7 +380,6 @@ pcm043 MACH_PCM043 PCM043 2072 sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097 avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104 mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125 -tx37 MACH_TX37 TX37 2127 rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 dm355_leopard MACH_DM355_LEOPARD DM355_LEOPARD 2138 ts219 MACH_TS219 TS219 2139 @@ -380,12 +388,12 @@ davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157 at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159 omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 -tx25 MACH_TX25 TX25 2177 omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 anw6410 MACH_ANW6410 ANW6410 2183 imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 portuxg20 MACH_PORTUXG20 PORTUXG20 2191 smdkc110 MACH_SMDKC110 SMDKC110 2193 +cabespresso MACH_CABESPRESSO CABESPRESSO 2194 omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200 netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201 netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202 @@ -404,6 +412,7 @@ bigdisk MACH_BIGDISK BIGDISK 2283 at91sam9g20ek_2mmc MACH_AT91SAM9G20EK_2MMC AT91SAM9G20EK_2MMC 2288 bcmring MACH_BCMRING BCMRING 2289 mahimahi MACH_MAHIMAHI MAHIMAHI 2304 +cerebric MACH_CEREBRIC CEREBRIC 2311 smdk6442 MACH_SMDK6442 SMDK6442 2324 openrd_base MACH_OPENRD_BASE OPENRD_BASE 2325 devkit8000 MACH_DEVKIT8000 DEVKIT8000 2330 @@ -423,10 +432,10 @@ raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413 raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414 raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415 tnetv107x MACH_TNETV107X TNETV107X 2418 -mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428 smdkv210 MACH_SMDKV210 SMDKV210 2456 omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 +cybook2440 MACH_CYBOOK2440 CYBOOK2440 2466 smartq7 MACH_SMARTQ7 SMARTQ7 2479 watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491 g4evm MACH_G4EVM G4EVM 2493 @@ -434,12 +443,10 @@ omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 ts41x MACH_TS41X TS41X 2502 phy3250 MACH_PHY3250 PHY3250 2511 mini6410 MACH_MINI6410 MINI6410 2520 -tx51 MACH_TX51 TX51 2529 mx28evk MACH_MX28EVK MX28EVK 2531 smartq5 MACH_SMARTQ5 SMARTQ5 2534 davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 -pca101 MACH_PCA101 PCA101 2595 capc7117 MACH_CAPC7117 CAPC7117 2612 icontrol MACH_ICONTROL ICONTROL 2624 gplugd MACH_GPLUGD GPLUGD 2625 @@ -465,6 +472,7 @@ igep0030 MACH_IGEP0030 IGEP0030 2717 sbc3530 MACH_SBC3530 SBC3530 2722 saarb MACH_SAARB SAARB 2727 harmony MACH_HARMONY HARMONY 2731 +cybook_orizon MACH_CYBOOK_ORIZON CYBOOK_ORIZON 2733 msm7x30_fluid MACH_MSM7X30_FLUID MSM7X30_FLUID 2741 cm_t3517 MACH_CM_T3517 CM_T3517 2750 wbd222 MACH_WBD222 WBD222 2753 @@ -480,10 +488,8 @@ eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 -pcaal1 MACH_PCAAL1 PCAAL1 2843 t5325 MACH_T5325 T5325 2846 income MACH_INCOME INCOME 2849 -mx257sx MACH_MX257SX MX257SX 2861 goni MACH_GONI GONI 2862 bv07 MACH_BV07 BV07 2882 openrd_ultimate MACH_OPENRD_ULTIMATE OPENRD_ULTIMATE 2884 @@ -491,7 +497,6 @@ devixp MACH_DEVIXP DEVIXP 2885 miccpt MACH_MICCPT MICCPT 2886 mic256 MACH_MIC256 MIC256 2887 u5500 MACH_U5500 U5500 2890 -pov15hd MACH_POV15HD POV15HD 2910 linkstation_lschl MACH_LINKSTATION_LSCHL LINKSTATION_LSCHL 2913 smdkv310 MACH_SMDKV310 SMDKV310 2925 wm8505_7in_netbook MACH_WM8505_7IN_NETBOOK WM8505_7IN_NETBOOK 2928 @@ -518,7 +523,6 @@ prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103 paz00 MACH_PAZ00 PAZ00 3128 acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 ag5evm MACH_AG5EVM AG5EVM 3189 -tsunagi MACH_TSUNAGI TSUNAGI 3197 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 trimslice MACH_TRIMSLICE TRIMSLICE 3209 @@ -529,8 +533,6 @@ msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230 msm8960_rumi3 MACH_MSM8960_RUMI3 MSM8960_RUMI3 3231 gsia18s MACH_GSIA18S GSIA18S 3234 mx53_loco MACH_MX53_LOCO MX53_LOCO 3273 -tx53 MACH_TX53 TX53 3279 -encore MACH_ENCORE ENCORE 3284 wario MACH_WARIO WARIO 3288 cm_t3730 MACH_CM_T3730 CM_T3730 3290 hrefv60 MACH_HREFV60 HREFV60 3293 @@ -538,603 +540,24 @@ armlex4210 MACH_ARMLEX4210 ARMLEX4210 3361 snowball MACH_SNOWBALL SNOWBALL 3363 xilinx_ep107 MACH_XILINX_EP107 XILINX_EP107 3378 nuri MACH_NURI NURI 3379 -wtplug MACH_WTPLUG WTPLUG 3412 -veridis_a300 MACH_VERIDIS_A300 VERIDIS_A300 3448 origen MACH_ORIGEN ORIGEN 3455 -wm8650refboard MACH_WM8650REFBOARD WM8650REFBOARD 3472 -xarina MACH_XARINA XARINA 3476 -sdvr MACH_SDVR SDVR 3478 -acer_maya MACH_ACER_MAYA ACER_MAYA 3479 -pico MACH_PICO PICO 3480 -cwmx233 MACH_CWMX233 CWMX233 3481 -cwam1808 MACH_CWAM1808 CWAM1808 3482 -cwdm365 MACH_CWDM365 CWDM365 3483 -mx51_moray MACH_MX51_MORAY MX51_MORAY 3484 -thales_cbc MACH_THALES_CBC THALES_CBC 3485 -bluepoint MACH_BLUEPOINT BLUEPOINT 3486 -dir665 MACH_DIR665 DIR665 3487 -acmerover1 MACH_ACMEROVER1 ACMEROVER1 3488 -shooter_ct MACH_SHOOTER_CT SHOOTER_CT 3489 -bliss MACH_BLISS BLISS 3490 -blissc MACH_BLISSC BLISSC 3491 -thales_adc MACH_THALES_ADC THALES_ADC 3492 -ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 -atdgp318 MACH_ATDGP318 ATDGP318 3494 -dma210u MACH_DMA210U DMA210U 3495 -em_t3 MACH_EM_T3 EM_T3 3496 -htx3250 MACH_HTX3250 HTX3250 3497 -g50 MACH_G50 G50 3498 -eco5 MACH_ECO5 ECO5 3499 -wintergrasp MACH_WINTERGRASP WINTERGRASP 3500 -puro MACH_PURO PURO 3501 -shooter_k MACH_SHOOTER_K SHOOTER_K 3502 nspire MACH_NSPIRE NSPIRE 3503 -mickxx MACH_MICKXX MICKXX 3504 -lxmb MACH_LXMB LXMB 3505 -adam MACH_ADAM ADAM 3507 -b1004 MACH_B1004 B1004 3508 -oboea MACH_OBOEA OBOEA 3509 -a1015 MACH_A1015 A1015 3510 -robin_vbdt30 MACH_ROBIN_VBDT30 ROBIN_VBDT30 3511 -tegra_enterprise MACH_TEGRA_ENTERPRISE TEGRA_ENTERPRISE 3512 -rfl108200_mk10 MACH_RFL108200_MK10 RFL108200_MK10 3513 -rfl108300_mk16 MACH_RFL108300_MK16 RFL108300_MK16 3514 -rover_v7 MACH_ROVER_V7 ROVER_V7 3515 -miphone MACH_MIPHONE MIPHONE 3516 -femtobts MACH_FEMTOBTS FEMTOBTS 3517 -monopoli MACH_MONOPOLI MONOPOLI 3518 -boss MACH_BOSS BOSS 3519 -davinci_dm368_vtam MACH_DAVINCI_DM368_VTAM DAVINCI_DM368_VTAM 3520 -clcon MACH_CLCON CLCON 3521 nokia_rm696 MACH_NOKIA_RM696 NOKIA_RM696 3522 -tahiti MACH_TAHITI TAHITI 3523 -fighter MACH_FIGHTER FIGHTER 3524 -sgh_i710 MACH_SGH_I710 SGH_I710 3525 -integreproscb MACH_INTEGREPROSCB INTEGREPROSCB 3526 -monza MACH_MONZA MONZA 3527 -calimain MACH_CALIMAIN CALIMAIN 3528 -mx6q_sabreauto MACH_MX6Q_SABREAUTO MX6Q_SABREAUTO 3529 -gma01x MACH_GMA01X GMA01X 3530 -sbc51 MACH_SBC51 SBC51 3531 -fit MACH_FIT FIT 3532 -steelhead MACH_STEELHEAD STEELHEAD 3533 -panther MACH_PANTHER PANTHER 3534 -msm8960_liquid MACH_MSM8960_LIQUID MSM8960_LIQUID 3535 -lexikonct MACH_LEXIKONCT LEXIKONCT 3536 -ns2816_stb MACH_NS2816_STB NS2816_STB 3537 -sei_mm2_lpc3250 MACH_SEI_MM2_LPC3250 SEI_MM2_LPC3250 3538 -cmimx53 MACH_CMIMX53 CMIMX53 3539 -sandwich MACH_SANDWICH SANDWICH 3540 -chief MACH_CHIEF CHIEF 3541 -pogo_e02 MACH_POGO_E02 POGO_E02 3542 mikrap_x168 MACH_MIKRAP_X168 MIKRAP_X168 3543 -htcmozart MACH_HTCMOZART HTCMOZART 3544 -htcgold MACH_HTCGOLD HTCGOLD 3545 -mt72xx MACH_MT72XX MT72XX 3546 -mx51_ivy MACH_MX51_IVY MX51_IVY 3547 -mx51_lvd MACH_MX51_LVD MX51_LVD 3548 -omap3_wiser2 MACH_OMAP3_WISER2 OMAP3_WISER2 3549 -dreamplug MACH_DREAMPLUG DREAMPLUG 3550 -cobas_c_111 MACH_COBAS_C_111 COBAS_C_111 3551 -cobas_u_411 MACH_COBAS_U_411 COBAS_U_411 3552 -hssd MACH_HSSD HSSD 3553 -iom35x MACH_IOM35X IOM35X 3554 -psom_omap MACH_PSOM_OMAP PSOM_OMAP 3555 -iphone_2g MACH_IPHONE_2G IPHONE_2G 3556 -iphone_3g MACH_IPHONE_3G IPHONE_3G 3557 -ipod_touch_1g MACH_IPOD_TOUCH_1G IPOD_TOUCH_1G 3558 -pharos_tpc MACH_PHAROS_TPC PHAROS_TPC 3559 -mx53_hydra MACH_MX53_HYDRA MX53_HYDRA 3560 -ns2816_dev_board MACH_NS2816_DEV_BOARD NS2816_DEV_BOARD 3561 -iphone_3gs MACH_IPHONE_3GS IPHONE_3GS 3562 -iphone_4 MACH_IPHONE_4 IPHONE_4 3563 -ipod_touch_4g MACH_IPOD_TOUCH_4G IPOD_TOUCH_4G 3564 -dragon_e1100 MACH_DRAGON_E1100 DRAGON_E1100 3565 -topside MACH_TOPSIDE TOPSIDE 3566 -irisiii MACH_IRISIII IRISIII 3567 deto_macarm9 MACH_DETO_MACARM9 DETO_MACARM9 3568 -eti_d1 MACH_ETI_D1 ETI_D1 3569 -som3530sdk MACH_SOM3530SDK SOM3530SDK 3570 -oc_engine MACH_OC_ENGINE OC_ENGINE 3571 -apq8064_sim MACH_APQ8064_SIM APQ8064_SIM 3572 -alps MACH_ALPS ALPS 3575 -tny_t3730 MACH_TNY_T3730 TNY_T3730 3576 -geryon_nfe MACH_GERYON_NFE GERYON_NFE 3577 -ns2816_ref_board MACH_NS2816_REF_BOARD NS2816_REF_BOARD 3578 -silverstone MACH_SILVERSTONE SILVERSTONE 3579 -mtt2440 MACH_MTT2440 MTT2440 3580 -ynicdb MACH_YNICDB YNICDB 3581 -bct MACH_BCT BCT 3582 -tuscan MACH_TUSCAN TUSCAN 3583 -xbt_sam9g45 MACH_XBT_SAM9G45 XBT_SAM9G45 3584 -enbw_cmc MACH_ENBW_CMC ENBW_CMC 3585 -ch104mx257 MACH_CH104MX257 CH104MX257 3587 -openpri MACH_OPENPRI OPENPRI 3588 -am335xevm MACH_AM335XEVM AM335XEVM 3589 -picodmb MACH_PICODMB PICODMB 3590 -waluigi MACH_WALUIGI WALUIGI 3591 -punicag7 MACH_PUNICAG7 PUNICAG7 3592 -ipad_1g MACH_IPAD_1G IPAD_1G 3593 -appletv_2g MACH_APPLETV_2G APPLETV_2G 3594 -mach_ecog45 MACH_MACH_ECOG45 MACH_ECOG45 3595 -ait_cam_enc_4xx MACH_AIT_CAM_ENC_4XX AIT_CAM_ENC_4XX 3596 -runnymede MACH_RUNNYMEDE RUNNYMEDE 3597 -play MACH_PLAY PLAY 3598 -hw90260 MACH_HW90260 HW90260 3599 -tagh MACH_TAGH TAGH 3600 -filbert MACH_FILBERT FILBERT 3601 -getinge_netcomv3 MACH_GETINGE_NETCOMV3 GETINGE_NETCOMV3 3602 -cw20 MACH_CW20 CW20 3603 -cinema MACH_CINEMA CINEMA 3604 -cinema_tea MACH_CINEMA_TEA CINEMA_TEA 3605 -cinema_coffee MACH_CINEMA_COFFEE CINEMA_COFFEE 3606 -cinema_juice MACH_CINEMA_JUICE CINEMA_JUICE 3607 -mx53_mirage2 MACH_MX53_MIRAGE2 MX53_MIRAGE2 3609 -mx53_efikasb MACH_MX53_EFIKASB MX53_EFIKASB 3610 -stm_b2000 MACH_STM_B2000 STM_B2000 3612 m28evk MACH_M28EVK M28EVK 3613 -pda MACH_PDA PDA 3614 -meraki_mr58 MACH_MERAKI_MR58 MERAKI_MR58 3615 kota2 MACH_KOTA2 KOTA2 3616 -letcool MACH_LETCOOL LETCOOL 3617 -mx27iat MACH_MX27IAT MX27IAT 3618 -apollo_td MACH_APOLLO_TD APOLLO_TD 3619 -arena MACH_ARENA ARENA 3620 -gsngateway MACH_GSNGATEWAY GSNGATEWAY 3621 -lf2000 MACH_LF2000 LF2000 3622 bonito MACH_BONITO BONITO 3623 -asymptote MACH_ASYMPTOTE ASYMPTOTE 3624 -bst2brd MACH_BST2BRD BST2BRD 3625 -tx335s MACH_TX335S TX335S 3626 -pelco_tesla MACH_PELCO_TESLA PELCO_TESLA 3627 -rrhtestplat MACH_RRHTESTPLAT RRHTESTPLAT 3628 -vidtonic_pro MACH_VIDTONIC_PRO VIDTONIC_PRO 3629 -pl_apollo MACH_PL_APOLLO PL_APOLLO 3630 -pl_phoenix MACH_PL_PHOENIX PL_PHOENIX 3631 -m28cu3 MACH_M28CU3 M28CU3 3632 -vvbox_hd MACH_VVBOX_HD VVBOX_HD 3633 -coreware_sam9260_ MACH_COREWARE_SAM9260_ COREWARE_SAM9260_ 3634 -marmaduke MACH_MARMADUKE MARMADUKE 3635 -amg_xlcore_camera MACH_AMG_XLCORE_CAMERA AMG_XLCORE_CAMERA 3636 omap3_egf MACH_OMAP3_EGF OMAP3_EGF 3637 smdk4212 MACH_SMDK4212 SMDK4212 3638 -dnp9200 MACH_DNP9200 DNP9200 3639 -tf101 MACH_TF101 TF101 3640 -omap3silvio MACH_OMAP3SILVIO OMAP3SILVIO 3641 -picasso2 MACH_PICASSO2 PICASSO2 3642 -vangogh2 MACH_VANGOGH2 VANGOGH2 3643 -olpc_xo_1_75 MACH_OLPC_XO_1_75 OLPC_XO_1_75 3644 -gx400 MACH_GX400 GX400 3645 -gs300 MACH_GS300 GS300 3646 -acer_a9 MACH_ACER_A9 ACER_A9 3647 -vivow_evm MACH_VIVOW_EVM VIVOW_EVM 3648 -veloce_cxq MACH_VELOCE_CXQ VELOCE_CXQ 3649 -veloce_cxm MACH_VELOCE_CXM VELOCE_CXM 3650 -p1852 MACH_P1852 P1852 3651 -naxy100 MACH_NAXY100 NAXY100 3652 -taishan MACH_TAISHAN TAISHAN 3653 -touchlink MACH_TOUCHLINK TOUCHLINK 3654 -stm32f103ze MACH_STM32F103ZE STM32F103ZE 3655 -mcx MACH_MCX MCX 3656 -stm_nmhdk_fli7610 MACH_STM_NMHDK_FLI7610 STM_NMHDK_FLI7610 3657 -top28x MACH_TOP28X TOP28X 3658 -okl4vp_microvisor MACH_OKL4VP_MICROVISOR OKL4VP_MICROVISOR 3659 -pop MACH_POP POP 3660 -layer MACH_LAYER LAYER 3661 -trondheim MACH_TRONDHEIM TRONDHEIM 3662 -eva MACH_EVA EVA 3663 -trust_taurus MACH_TRUST_TAURUS TRUST_TAURUS 3664 -ns2816_huashan MACH_NS2816_HUASHAN NS2816_HUASHAN 3665 -ns2816_yangcheng MACH_NS2816_YANGCHENG NS2816_YANGCHENG 3666 -p852 MACH_P852 P852 3667 -flea3 MACH_FLEA3 FLEA3 3668 -bowfin MACH_BOWFIN BOWFIN 3669 -mv88de3100 MACH_MV88DE3100 MV88DE3100 3670 -pia_am35x MACH_PIA_AM35X PIA_AM35X 3671 -cedar MACH_CEDAR CEDAR 3672 -picasso_e MACH_PICASSO_E PICASSO_E 3673 -samsung_e60 MACH_SAMSUNG_E60 SAMSUNG_E60 3674 -sdvr_mini MACH_SDVR_MINI SDVR_MINI 3676 -omap3_ij3k MACH_OMAP3_IJ3K OMAP3_IJ3K 3677 -modasmc1 MACH_MODASMC1 MODASMC1 3678 -apq8064_rumi3 MACH_APQ8064_RUMI3 APQ8064_RUMI3 3679 -matrix506 MACH_MATRIX506 MATRIX506 3680 -msm9615_mtp MACH_MSM9615_MTP MSM9615_MTP 3681 -dm36x_spawndc MACH_DM36X_SPAWNDC DM36X_SPAWNDC 3682 -sff792 MACH_SFF792 SFF792 3683 -am335xiaevm MACH_AM335XIAEVM AM335XIAEVM 3684 -g3c2440 MACH_G3C2440 G3C2440 3685 -tion270 MACH_TION270 TION270 3686 -w22q7arm02 MACH_W22Q7ARM02 W22Q7ARM02 3687 -omap_cat MACH_OMAP_CAT OMAP_CAT 3688 -at91sam9n12ek MACH_AT91SAM9N12EK AT91SAM9N12EK 3689 -morrison MACH_MORRISON MORRISON 3690 -svdu MACH_SVDU SVDU 3691 -lpp01 MACH_LPP01 LPP01 3692 -ubc283 MACH_UBC283 UBC283 3693 -zeppelin MACH_ZEPPELIN ZEPPELIN 3694 -motus MACH_MOTUS MOTUS 3695 -neomainboard MACH_NEOMAINBOARD NEOMAINBOARD 3696 -devkit3250 MACH_DEVKIT3250 DEVKIT3250 3697 -devkit7000 MACH_DEVKIT7000 DEVKIT7000 3698 -fmc_uic MACH_FMC_UIC FMC_UIC 3699 -fmc_dcm MACH_FMC_DCM FMC_DCM 3700 -batwm MACH_BATWM BATWM 3701 -atlas6cb MACH_ATLAS6CB ATLAS6CB 3702 -blue MACH_BLUE BLUE 3705 -colorado MACH_COLORADO COLORADO 3706 -popc MACH_POPC POPC 3707 -promwad_jade MACH_PROMWAD_JADE PROMWAD_JADE 3708 -amp MACH_AMP AMP 3709 -gnet_amp MACH_GNET_AMP GNET_AMP 3710 -toques MACH_TOQUES TOQUES 3711 apx4devkit MACH_APX4DEVKIT APX4DEVKIT 3712 -dct_storm MACH_DCT_STORM DCT_STORM 3713 -owl MACH_OWL OWL 3715 -cogent_csb1741 MACH_COGENT_CSB1741 COGENT_CSB1741 3716 -adillustra610 MACH_ADILLUSTRA610 ADILLUSTRA610 3718 -ecafe_na04 MACH_ECAFE_NA04 ECAFE_NA04 3719 -popct MACH_POPCT POPCT 3720 -omap3_helena MACH_OMAP3_HELENA OMAP3_HELENA 3721 -ach MACH_ACH ACH 3722 -module_dtb MACH_MODULE_DTB MODULE_DTB 3723 -oslo_elisabeth MACH_OSLO_ELISABETH OSLO_ELISABETH 3725 -tt01 MACH_TT01 TT01 3726 -msm8930_cdp MACH_MSM8930_CDP MSM8930_CDP 3727 -msm8930_mtp MACH_MSM8930_MTP MSM8930_MTP 3728 -msm8930_fluid MACH_MSM8930_FLUID MSM8930_FLUID 3729 -ltu11 MACH_LTU11 LTU11 3730 -am1808_spawnco MACH_AM1808_SPAWNCO AM1808_SPAWNCO 3731 -flx6410 MACH_FLX6410 FLX6410 3732 -mx6q_qsb MACH_MX6Q_QSB MX6Q_QSB 3733 -mx53_plt424 MACH_MX53_PLT424 MX53_PLT424 3734 -jasmine MACH_JASMINE JASMINE 3735 -l138_owlboard_plus MACH_L138_OWLBOARD_PLUS L138_OWLBOARD_PLUS 3736 -wr21 MACH_WR21 WR21 3737 -peaboy MACH_PEABOY PEABOY 3739 -mx28_plato MACH_MX28_PLATO MX28_PLATO 3740 -kacom2 MACH_KACOM2 KACOM2 3741 -slco MACH_SLCO SLCO 3742 -imx51pico MACH_IMX51PICO IMX51PICO 3743 -glink1 MACH_GLINK1 GLINK1 3744 -diamond MACH_DIAMOND DIAMOND 3745 -d9000 MACH_D9000 D9000 3746 -w5300e01 MACH_W5300E01 W5300E01 3747 -im6000 MACH_IM6000 IM6000 3748 -mx51_fred51 MACH_MX51_FRED51 MX51_FRED51 3749 -stm32f2 MACH_STM32F2 STM32F2 3750 -ville MACH_VILLE VILLE 3751 -ptip_murnau MACH_PTIP_MURNAU PTIP_MURNAU 3752 -ptip_classic MACH_PTIP_CLASSIC PTIP_CLASSIC 3753 -mx53grb MACH_MX53GRB MX53GRB 3754 -gagarin MACH_GAGARIN GAGARIN 3755 -nas2big MACH_NAS2BIG NAS2BIG 3757 -superfemto MACH_SUPERFEMTO SUPERFEMTO 3758 -teufel MACH_TEUFEL TEUFEL 3759 -dinara MACH_DINARA DINARA 3760 -vanquish MACH_VANQUISH VANQUISH 3761 -zipabox1 MACH_ZIPABOX1 ZIPABOX1 3762 -u9540 MACH_U9540 U9540 3763 -jet MACH_JET JET 3764 smdk4412 MACH_SMDK4412 SMDK4412 3765 -elite MACH_ELITE ELITE 3766 -spear320_hmi MACH_SPEAR320_HMI SPEAR320_HMI 3767 -ontario MACH_ONTARIO ONTARIO 3768 -mx6q_sabrelite MACH_MX6Q_SABRELITE MX6Q_SABRELITE 3769 -vc200 MACH_VC200 VC200 3770 -msm7625a_ffa MACH_MSM7625A_FFA MSM7625A_FFA 3771 -msm7625a_surf MACH_MSM7625A_SURF MSM7625A_SURF 3772 -benthossbp MACH_BENTHOSSBP BENTHOSSBP 3773 -smdk5210 MACH_SMDK5210 SMDK5210 3774 -empq2300 MACH_EMPQ2300 EMPQ2300 3775 -minipos MACH_MINIPOS MINIPOS 3776 -omap5_sevm MACH_OMAP5_SEVM OMAP5_SEVM 3777 -shelter MACH_SHELTER SHELTER 3778 -omap3_devkit8500 MACH_OMAP3_DEVKIT8500 OMAP3_DEVKIT8500 3779 -edgetd MACH_EDGETD EDGETD 3780 -copperyard MACH_COPPERYARD COPPERYARD 3781 -edge_u MACH_EDGE_U EDGE_U 3783 -edge_td MACH_EDGE_TD EDGE_TD 3784 -wdss MACH_WDSS WDSS 3785 -dl_pb25 MACH_DL_PB25 DL_PB25 3786 -dss11 MACH_DSS11 DSS11 3787 -cpa MACH_CPA CPA 3788 -aptp2000 MACH_APTP2000 APTP2000 3789 marzen MACH_MARZEN MARZEN 3790 -st_turbine MACH_ST_TURBINE ST_TURBINE 3791 -gtl_it3300 MACH_GTL_IT3300 GTL_IT3300 3792 -mx6_mule MACH_MX6_MULE MX6_MULE 3793 -v7pxa_dt MACH_V7PXA_DT V7PXA_DT 3794 -v7mmp_dt MACH_V7MMP_DT V7MMP_DT 3795 -dragon7 MACH_DRAGON7 DRAGON7 3796 krome MACH_KROME KROME 3797 -oratisdante MACH_ORATISDANTE ORATISDANTE 3798 -fathom MACH_FATHOM FATHOM 3799 -dns325 MACH_DNS325 DNS325 3800 -sarnen MACH_SARNEN SARNEN 3801 -ubisys_g1 MACH_UBISYS_G1 UBISYS_G1 3802 -mx53_pf1 MACH_MX53_PF1 MX53_PF1 3803 -asanti MACH_ASANTI ASANTI 3804 -volta MACH_VOLTA VOLTA 3805 -knight MACH_KNIGHT KNIGHT 3807 -beaglebone MACH_BEAGLEBONE BEAGLEBONE 3808 -becker MACH_BECKER BECKER 3809 -fc360 MACH_FC360 FC360 3810 -pmi2_xls MACH_PMI2_XLS PMI2_XLS 3811 -taranto MACH_TARANTO TARANTO 3812 -plutux MACH_PLUTUX PLUTUX 3813 -ipmp_medcom MACH_IPMP_MEDCOM IPMP_MEDCOM 3814 -absolut MACH_ABSOLUT ABSOLUT 3815 -awpb3 MACH_AWPB3 AWPB3 3816 -nfp32xx_dt MACH_NFP32XX_DT NFP32XX_DT 3817 -dl_pb53 MACH_DL_PB53 DL_PB53 3818 -acu_ii MACH_ACU_II ACU_II 3819 -avalon MACH_AVALON AVALON 3820 -sphinx MACH_SPHINX SPHINX 3821 -titan_t MACH_TITAN_T TITAN_T 3822 -harvest_boris MACH_HARVEST_BORIS HARVEST_BORIS 3823 -mach_msm7x30_m3s MACH_MACH_MSM7X30_M3S MACH_MSM7X30_M3S 3824 -smdk5250 MACH_SMDK5250 SMDK5250 3825 -imxt_lite MACH_IMXT_LITE IMXT_LITE 3826 -imxt_std MACH_IMXT_STD IMXT_STD 3827 -imxt_log MACH_IMXT_LOG IMXT_LOG 3828 -imxt_nav MACH_IMXT_NAV IMXT_NAV 3829 -imxt_full MACH_IMXT_FULL IMXT_FULL 3830 -ag09015 MACH_AG09015 AG09015 3831 -am3517_mt_ventoux MACH_AM3517_MT_VENTOUX AM3517_MT_VENTOUX 3832 -dp1arm9 MACH_DP1ARM9 DP1ARM9 3833 -picasso_m MACH_PICASSO_M PICASSO_M 3834 -video_gadget MACH_VIDEO_GADGET VIDEO_GADGET 3835 -mtt_om3x MACH_MTT_OM3X MTT_OM3X 3836 -mx6q_arm2 MACH_MX6Q_ARM2 MX6Q_ARM2 3837 -picosam9g45 MACH_PICOSAM9G45 PICOSAM9G45 3838 -vpm_dm365 MACH_VPM_DM365 VPM_DM365 3839 -bonfire MACH_BONFIRE BONFIRE 3840 -mt2p2d MACH_MT2P2D MT2P2D 3841 -sigpda01 MACH_SIGPDA01 SIGPDA01 3842 -cn27 MACH_CN27 CN27 3843 -mx25_cwtap MACH_MX25_CWTAP MX25_CWTAP 3844 -apf28 MACH_APF28 APF28 3845 -pelco_maxwell MACH_PELCO_MAXWELL PELCO_MAXWELL 3846 -ge_phoenix MACH_GE_PHOENIX GE_PHOENIX 3847 -empc_a500 MACH_EMPC_A500 EMPC_A500 3848 -ims_arm9 MACH_IMS_ARM9 IMS_ARM9 3849 -mini2416 MACH_MINI2416 MINI2416 3850 -mini2450 MACH_MINI2450 MINI2450 3851 -mini310 MACH_MINI310 MINI310 3852 -spear_hurricane MACH_SPEAR_HURRICANE SPEAR_HURRICANE 3853 -mt7208 MACH_MT7208 MT7208 3854 -lpc178x MACH_LPC178X LPC178X 3855 -farleys MACH_FARLEYS FARLEYS 3856 -efm32gg_dk3750 MACH_EFM32GG_DK3750 EFM32GG_DK3750 3857 -zeus_board MACH_ZEUS_BOARD ZEUS_BOARD 3858 -cc51 MACH_CC51 CC51 3859 -fxi_c210 MACH_FXI_C210 FXI_C210 3860 -msm8627_cdp MACH_MSM8627_CDP MSM8627_CDP 3861 -msm8627_mtp MACH_MSM8627_MTP MSM8627_MTP 3862 armadillo800eva MACH_ARMADILLO800EVA ARMADILLO800EVA 3863 -primou MACH_PRIMOU PRIMOU 3864 -primoc MACH_PRIMOC PRIMOC 3865 -primoct MACH_PRIMOCT PRIMOCT 3866 -a9500 MACH_A9500 A9500 3867 -pluto MACH_PLUTO PLUTO 3869 -acfx100 MACH_ACFX100 ACFX100 3870 -msm8625_rumi3 MACH_MSM8625_RUMI3 MSM8625_RUMI3 3871 -valente MACH_VALENTE VALENTE 3872 -crfs_rfeye MACH_CRFS_RFEYE CRFS_RFEYE 3873 -rfeye MACH_RFEYE RFEYE 3874 -phidget_sbc3 MACH_PHIDGET_SBC3 PHIDGET_SBC3 3875 -tcw_mika MACH_TCW_MIKA TCW_MIKA 3876 -imx28_egf MACH_IMX28_EGF IMX28_EGF 3877 -valente_wx MACH_VALENTE_WX VALENTE_WX 3878 -huangshans MACH_HUANGSHANS HUANGSHANS 3879 -bosphorus1 MACH_BOSPHORUS1 BOSPHORUS1 3880 -prima MACH_PRIMA PRIMA 3881 -evita_ulk MACH_EVITA_ULK EVITA_ULK 3884 -merisc600 MACH_MERISC600 MERISC600 3885 -dolak MACH_DOLAK DOLAK 3886 -sbc53 MACH_SBC53 SBC53 3887 -elite_ulk MACH_ELITE_ULK ELITE_ULK 3888 -pov2 MACH_POV2 POV2 3889 -ipod_touch_2g MACH_IPOD_TOUCH_2G IPOD_TOUCH_2G 3890 -da850_pqab MACH_DA850_PQAB DA850_PQAB 3891 -fermi MACH_FERMI FERMI 3892 -ccardwmx28 MACH_CCARDWMX28 CCARDWMX28 3893 -ccardmx28 MACH_CCARDMX28 CCARDMX28 3894 -fs20_fcm2050 MACH_FS20_FCM2050 FS20_FCM2050 3895 -kinetis MACH_KINETIS KINETIS 3896 -kai MACH_KAI KAI 3897 -bcthb2 MACH_BCTHB2 BCTHB2 3898 -inels3_cu MACH_INELS3_CU INELS3_CU 3899 -da850_apollo MACH_DA850_APOLLO DA850_APOLLO 3901 -tracnas MACH_TRACNAS TRACNAS 3902 -mityarm335x MACH_MITYARM335X MITYARM335X 3903 -xcgz7x MACH_XCGZ7X XCGZ7X 3904 -cubox MACH_CUBOX CUBOX 3905 -terminator MACH_TERMINATOR TERMINATOR 3906 -eye03 MACH_EYE03 EYE03 3907 -kota3 MACH_KOTA3 KOTA3 3908 -pscpe MACH_PSCPE PSCPE 3910 -akt1100 MACH_AKT1100 AKT1100 3911 -pcaaxl2 MACH_PCAAXL2 PCAAXL2 3912 -primodd_ct MACH_PRIMODD_CT PRIMODD_CT 3913 -nsbc MACH_NSBC NSBC 3914 -meson2_skt MACH_MESON2_SKT MESON2_SKT 3915 -meson2_ref MACH_MESON2_REF MESON2_REF 3916 -ccardwmx28js MACH_CCARDWMX28JS CCARDWMX28JS 3917 -ccardmx28js MACH_CCARDMX28JS CCARDMX28JS 3918 -indico MACH_INDICO INDICO 3919 -msm8960dt MACH_MSM8960DT MSM8960DT 3920 -primods MACH_PRIMODS PRIMODS 3921 -beluga_m1388 MACH_BELUGA_M1388 BELUGA_M1388 3922 -primotd MACH_PRIMOTD PRIMOTD 3923 -varan_master MACH_VARAN_MASTER VARAN_MASTER 3924 -primodd MACH_PRIMODD PRIMODD 3925 -jetduo MACH_JETDUO JETDUO 3926 mx53_umobo MACH_MX53_UMOBO MX53_UMOBO 3927 -trats MACH_TRATS TRATS 3928 -starcraft MACH_STARCRAFT STARCRAFT 3929 -qseven_tegra2 MACH_QSEVEN_TEGRA2 QSEVEN_TEGRA2 3930 -lichee_sun4i_devbd MACH_LICHEE_SUN4I_DEVBD LICHEE_SUN4I_DEVBD 3931 -movenow MACH_MOVENOW MOVENOW 3932 -golf_u MACH_GOLF_U GOLF_U 3933 -msm7627a_evb MACH_MSM7627A_EVB MSM7627A_EVB 3934 -rambo MACH_RAMBO RAMBO 3935 -golfu MACH_GOLFU GOLFU 3936 -mango310 MACH_MANGO310 MANGO310 3937 -dns343 MACH_DNS343 DNS343 3938 -var_som_om44 MACH_VAR_SOM_OM44 VAR_SOM_OM44 3939 -naon MACH_NAON NAON 3940 -vp4000 MACH_VP4000 VP4000 3941 -impcard MACH_IMPCARD IMPCARD 3942 -smoovcam MACH_SMOOVCAM SMOOVCAM 3943 -cobham3725 MACH_COBHAM3725 COBHAM3725 3944 -cobham3730 MACH_COBHAM3730 COBHAM3730 3945 -cobham3703 MACH_COBHAM3703 COBHAM3703 3946 -quetzal MACH_QUETZAL QUETZAL 3947 -apq8064_cdp MACH_APQ8064_CDP APQ8064_CDP 3948 -apq8064_mtp MACH_APQ8064_MTP APQ8064_MTP 3949 -apq8064_fluid MACH_APQ8064_FLUID APQ8064_FLUID 3950 -apq8064_liquid MACH_APQ8064_LIQUID APQ8064_LIQUID 3951 -mango210 MACH_MANGO210 MANGO210 3952 -mango100 MACH_MANGO100 MANGO100 3953 -mango24 MACH_MANGO24 MANGO24 3954 -mango64 MACH_MANGO64 MANGO64 3955 -nsa320 MACH_NSA320 NSA320 3956 -elv_ccu2 MACH_ELV_CCU2 ELV_CCU2 3957 -triton_x00 MACH_TRITON_X00 TRITON_X00 3958 -triton_1500_2000 MACH_TRITON_1500_2000 TRITON_1500_2000 3959 -pogoplugv4 MACH_POGOPLUGV4 POGOPLUGV4 3960 -venus_cl MACH_VENUS_CL VENUS_CL 3961 -vulcano_g20 MACH_VULCANO_G20 VULCANO_G20 3962 -sgs_i9100 MACH_SGS_I9100 SGS_I9100 3963 -stsv2 MACH_STSV2 STSV2 3964 -csb1724 MACH_CSB1724 CSB1724 3965 -omapl138_lcdk MACH_OMAPL138_LCDK OMAPL138_LCDK 3966 -pvd_mx25 MACH_PVD_MX25 PVD_MX25 3968 -meson6_skt MACH_MESON6_SKT MESON6_SKT 3969 -meson6_ref MACH_MESON6_REF MESON6_REF 3970 -pxm MACH_PXM PXM 3971 -pogoplugv3 MACH_POGOPLUGV3 POGOPLUGV3 3973 -mlp89626 MACH_MLP89626 MLP89626 3974 -iomegahmndce MACH_IOMEGAHMNDCE IOMEGAHMNDCE 3975 -pogoplugv3pci MACH_POGOPLUGV3PCI POGOPLUGV3PCI 3976 -bntv250 MACH_BNTV250 BNTV250 3977 -mx53_qseven MACH_MX53_QSEVEN MX53_QSEVEN 3978 -gtl_it1100 MACH_GTL_IT1100 GTL_IT1100 3979 -mx6q_sabresd MACH_MX6Q_SABRESD MX6Q_SABRESD 3980 mt4 MACH_MT4 MT4 3981 -jumbo_d MACH_JUMBO_D JUMBO_D 3982 -jumbo_i MACH_JUMBO_I JUMBO_I 3983 -fs20_dmp MACH_FS20_DMP FS20_DMP 3984 -dns320 MACH_DNS320 DNS320 3985 -mx28bacos MACH_MX28BACOS MX28BACOS 3986 -tl80 MACH_TL80 TL80 3987 -polatis_nic_1001 MACH_POLATIS_NIC_1001 POLATIS_NIC_1001 3988 -tely MACH_TELY TELY 3989 u8520 MACH_U8520 U8520 3990 -manta MACH_MANTA MANTA 3991 -mpq8064_cdp MACH_MPQ8064_CDP MPQ8064_CDP 3993 -mpq8064_dtv MACH_MPQ8064_DTV MPQ8064_DTV 3995 -dm368som MACH_DM368SOM DM368SOM 3996 -gprisb2 MACH_GPRISB2 GPRISB2 3997 -chammid MACH_CHAMMID CHAMMID 3998 -seoul2 MACH_SEOUL2 SEOUL2 3999 -omap4_nooktablet MACH_OMAP4_NOOKTABLET OMAP4_NOOKTABLET 4000 -aalto MACH_AALTO AALTO 4001 -metro MACH_METRO METRO 4002 -cydm3730 MACH_CYDM3730 CYDM3730 4003 -tqma53 MACH_TQMA53 TQMA53 4004 -msm7627a_qrd3 MACH_MSM7627A_QRD3 MSM7627A_QRD3 4005 -mx28_canby MACH_MX28_CANBY MX28_CANBY 4006 -tiger MACH_TIGER TIGER 4007 -pcats_9307_type_a MACH_PCATS_9307_TYPE_A PCATS_9307_TYPE_A 4008 -pcats_9307_type_o MACH_PCATS_9307_TYPE_O PCATS_9307_TYPE_O 4009 -pcats_9307_type_r MACH_PCATS_9307_TYPE_R PCATS_9307_TYPE_R 4010 -streamplug MACH_STREAMPLUG STREAMPLUG 4011 -icechicken_dev MACH_ICECHICKEN_DEV ICECHICKEN_DEV 4012 -hedgehog MACH_HEDGEHOG HEDGEHOG 4013 -yusend_obc MACH_YUSEND_OBC YUSEND_OBC 4014 -imxninja MACH_IMXNINJA IMXNINJA 4015 -omap4_jarod MACH_OMAP4_JAROD OMAP4_JAROD 4016 -eco5_pk MACH_ECO5_PK ECO5_PK 4017 -qj2440 MACH_QJ2440 QJ2440 4018 -mx6q_mercury MACH_MX6Q_MERCURY MX6Q_MERCURY 4019 -cm6810 MACH_CM6810 CM6810 4020 -omap4_torpedo MACH_OMAP4_TORPEDO OMAP4_TORPEDO 4021 -nsa310 MACH_NSA310 NSA310 4022 -tmx536 MACH_TMX536 TMX536 4023 -ktt20 MACH_KTT20 KTT20 4024 -dragonix MACH_DRAGONIX DRAGONIX 4025 -lungching MACH_LUNGCHING LUNGCHING 4026 -bulogics MACH_BULOGICS BULOGICS 4027 -mx535_sx MACH_MX535_SX MX535_SX 4028 -ngui3250 MACH_NGUI3250 NGUI3250 4029 -salutec_dac MACH_SALUTEC_DAC SALUTEC_DAC 4030 -loco MACH_LOCO LOCO 4031 -ctera_plug_usi MACH_CTERA_PLUG_USI CTERA_PLUG_USI 4032 -scepter MACH_SCEPTER SCEPTER 4033 -sga MACH_SGA SGA 4034 -p_81_j5 MACH_P_81_J5 P_81_J5 4035 -p_81_o4 MACH_P_81_O4 P_81_O4 4036 -msm8625_surf MACH_MSM8625_SURF MSM8625_SURF 4037 -carallon_shark MACH_CARALLON_SHARK CARALLON_SHARK 4038 -ordog MACH_ORDOG ORDOG 4040 -puente_io MACH_PUENTE_IO PUENTE_IO 4041 -msm8625_evb MACH_MSM8625_EVB MSM8625_EVB 4042 -ev_am1707 MACH_EV_AM1707 EV_AM1707 4043 -ev_am1707e2 MACH_EV_AM1707E2 EV_AM1707E2 4044 -ev_am3517e2 MACH_EV_AM3517E2 EV_AM3517E2 4045 -calabria MACH_CALABRIA CALABRIA 4046 -ev_imx287 MACH_EV_IMX287 EV_IMX287 4047 -erau MACH_ERAU ERAU 4048 -sichuan MACH_SICHUAN SICHUAN 4049 -davinci_da850 MACH_DAVINCI_DA850 DAVINCI_DA850 4051 -omap138_trunarc MACH_OMAP138_TRUNARC OMAP138_TRUNARC 4052 -bcm4761 MACH_BCM4761 BCM4761 4053 -picasso_e2 MACH_PICASSO_E2 PICASSO_E2 4054 -picasso_mf MACH_PICASSO_MF PICASSO_MF 4055 -miro MACH_MIRO MIRO 4056 -at91sam9g20ewon3 MACH_AT91SAM9G20EWON3 AT91SAM9G20EWON3 4057 -yoyo MACH_YOYO YOYO 4058 -windjkl MACH_WINDJKL WINDJKL 4059 -monarudo MACH_MONARUDO MONARUDO 4060 -batan MACH_BATAN BATAN 4061 -tadao MACH_TADAO TADAO 4062 -baso MACH_BASO BASO 4063 -mahon MACH_MAHON MAHON 4064 -villec2 MACH_VILLEC2 VILLEC2 4065 -asi1230 MACH_ASI1230 ASI1230 4066 -alaska MACH_ALASKA ALASKA 4067 -swarco_shdsl2 MACH_SWARCO_SHDSL2 SWARCO_SHDSL2 4068 -oxrtu MACH_OXRTU OXRTU 4069 -omap5_panda MACH_OMAP5_PANDA OMAP5_PANDA 4070 -c8000 MACH_C8000 C8000 4072 -bje_display3_5 MACH_BJE_DISPLAY3_5 BJE_DISPLAY3_5 4073 -picomod7 MACH_PICOMOD7 PICOMOD7 4074 -picocom5 MACH_PICOCOM5 PICOCOM5 4075 -qblissa8 MACH_QBLISSA8 QBLISSA8 4076 -armstonea8 MACH_ARMSTONEA8 ARMSTONEA8 4077 -netdcu14 MACH_NETDCU14 NETDCU14 4078 -at91sam9x5_epiphan MACH_AT91SAM9X5_EPIPHAN AT91SAM9X5_EPIPHAN 4079 -p2u MACH_P2U P2U 4080 -doris MACH_DORIS DORIS 4081 -j49 MACH_J49 J49 4082 -vdss2e MACH_VDSS2E VDSS2E 4083 -vc300 MACH_VC300 VC300 4084 -ns115_pad_test MACH_NS115_PAD_TEST NS115_PAD_TEST 4085 -ns115_pad_ref MACH_NS115_PAD_REF NS115_PAD_REF 4086 -ns115_phone_test MACH_NS115_PHONE_TEST NS115_PHONE_TEST 4087 -ns115_phone_ref MACH_NS115_PHONE_REF NS115_PHONE_REF 4088 -golfc MACH_GOLFC GOLFC 4089 -xerox_olympus MACH_XEROX_OLYMPUS XEROX_OLYMPUS 4090 -mx6sl_arm2 MACH_MX6SL_ARM2 MX6SL_ARM2 4091 -csb1701_csb1726 MACH_CSB1701_CSB1726 CSB1701_CSB1726 4092 -at91sam9xeek MACH_AT91SAM9XEEK AT91SAM9XEEK 4093 -ebv210 MACH_EBV210 EBV210 4094 -msm7627a_qrd7 MACH_MSM7627A_QRD7 MSM7627A_QRD7 4095 -svthin MACH_SVTHIN SVTHIN 4096 -duovero MACH_DUOVERO DUOVERO 4097 chupacabra MACH_CHUPACABRA CHUPACABRA 4098 scorpion MACH_SCORPION SCORPION 4099 davinci_he_hmi10 MACH_DAVINCI_HE_HMI10 DAVINCI_HE_HMI10 4100 @@ -1157,7 +580,6 @@ tam335x MACH_TAM335X TAM335X 4116 grouper MACH_GROUPER GROUPER 4117 mpcsa21_9g20 MACH_MPCSA21_9G20 MPCSA21_9G20 4118 m6u_cpu MACH_M6U_CPU M6U_CPU 4119 -davinci_dp10 MACH_DAVINCI_DP10 DAVINCI_DP10 4120 ginkgo MACH_GINKGO GINKGO 4121 cgt_qmx6 MACH_CGT_QMX6 CGT_QMX6 4122 profpga MACH_PROFPGA PROFPGA 4123 @@ -1204,3 +626,384 @@ baileys MACH_BAILEYS BAILEYS 4169 familybox MACH_FAMILYBOX FAMILYBOX 4170 ensemble_mx35 MACH_ENSEMBLE_MX35 ENSEMBLE_MX35 4171 sc_sps_1 MACH_SC_SPS_1 SC_SPS_1 4172 +ucsimply_sam9260 MACH_UCSIMPLY_SAM9260 UCSIMPLY_SAM9260 4173 +unicorn MACH_UNICORN UNICORN 4174 +m9g45a MACH_M9G45A M9G45A 4175 +mtwebif MACH_MTWEBIF MTWEBIF 4176 +playstone MACH_PLAYSTONE PLAYSTONE 4177 +chelsea MACH_CHELSEA CHELSEA 4178 +bayern MACH_BAYERN BAYERN 4179 +mitwo MACH_MITWO MITWO 4180 +mx25_noah MACH_MX25_NOAH MX25_NOAH 4181 +stm_b2020 MACH_STM_B2020 STM_B2020 4182 +annax_src MACH_ANNAX_SRC ANNAX_SRC 4183 +ionics_stratus MACH_IONICS_STRATUS IONICS_STRATUS 4184 +hugo MACH_HUGO HUGO 4185 +em300 MACH_EM300 EM300 4186 +mmp3_qseven MACH_MMP3_QSEVEN MMP3_QSEVEN 4187 +bosphorus2 MACH_BOSPHORUS2 BOSPHORUS2 4188 +tt2200 MACH_TT2200 TT2200 4189 +ocelot3 MACH_OCELOT3 OCELOT3 4190 +tek_cobra MACH_TEK_COBRA TEK_COBRA 4191 +protou MACH_PROTOU PROTOU 4192 +msm8625_evt MACH_MSM8625_EVT MSM8625_EVT 4193 +mx53_sellwood MACH_MX53_SELLWOOD MX53_SELLWOOD 4194 +somiq_am35 MACH_SOMIQ_AM35 SOMIQ_AM35 4195 +somiq_am37 MACH_SOMIQ_AM37 SOMIQ_AM37 4196 +k2_plc_cl MACH_K2_PLC_CL K2_PLC_CL 4197 +tc2 MACH_TC2 TC2 4198 +dulex_j MACH_DULEX_J DULEX_J 4199 +stm_b2044 MACH_STM_B2044 STM_B2044 4200 +deluxe_j MACH_DELUXE_J DELUXE_J 4201 +mango2443 MACH_MANGO2443 MANGO2443 4202 +cp2dcg MACH_CP2DCG CP2DCG 4203 +cp2dtg MACH_CP2DTG CP2DTG 4204 +cp2dug MACH_CP2DUG CP2DUG 4205 +var_som_am33 MACH_VAR_SOM_AM33 VAR_SOM_AM33 4206 +pepper MACH_PEPPER PEPPER 4207 +mango2450 MACH_MANGO2450 MANGO2450 4208 +valente_wx_c9 MACH_VALENTE_WX_C9 VALENTE_WX_C9 4209 +minitv MACH_MINITV MINITV 4210 +u8540 MACH_U8540 U8540 4211 +iv_atlas_i_z7e MACH_IV_ATLAS_I_Z7E IV_ATLAS_I_Z7E 4212 +mach_type_sky MACH_MACH_TYPE_SKY MACH_TYPE_SKY 4214 +bluesky MACH_BLUESKY BLUESKY 4215 +ngrouter MACH_NGROUTER NGROUTER 4216 +mx53_denetim MACH_MX53_DENETIM MX53_DENETIM 4217 +opal MACH_OPAL OPAL 4218 +gnet_us3gref MACH_GNET_US3GREF GNET_US3GREF 4219 +gnet_nc3g MACH_GNET_NC3G GNET_NC3G 4220 +gnet_ge3g MACH_GNET_GE3G GNET_GE3G 4221 +adp2 MACH_ADP2 ADP2 4222 +tqma28 MACH_TQMA28 TQMA28 4223 +kacom3 MACH_KACOM3 KACOM3 4224 +rrhdemo MACH_RRHDEMO RRHDEMO 4225 +protodug MACH_PROTODUG PROTODUG 4226 +lago MACH_LAGO LAGO 4227 +ktt30 MACH_KTT30 KTT30 4228 +ts43xx MACH_TS43XX TS43XX 4229 +mx6q_denso MACH_MX6Q_DENSO MX6Q_DENSO 4230 +comsat_gsmumts8 MACH_COMSAT_GSMUMTS8 COMSAT_GSMUMTS8 4231 +dreamx MACH_DREAMX DREAMX 4232 +thunderstonem MACH_THUNDERSTONEM THUNDERSTONEM 4233 +yoyopad MACH_YOYOPAD YOYOPAD 4234 +yoyopatient MACH_YOYOPATIENT YOYOPATIENT 4235 +a10l MACH_A10L A10L 4236 +mq60 MACH_MQ60 MQ60 4237 +linkstation_lsql MACH_LINKSTATION_LSQL LINKSTATION_LSQL 4238 +am3703gateway MACH_AM3703GATEWAY AM3703GATEWAY 4239 +accipiter MACH_ACCIPITER ACCIPITER 4240 +magnidug MACH_MAGNIDUG MAGNIDUG 4242 +hydra MACH_HYDRA HYDRA 4243 +sun3i MACH_SUN3I SUN3I 4244 +stm_b2078 MACH_STM_B2078 STM_B2078 4245 +at91sam9263deskv2 MACH_AT91SAM9263DESKV2 AT91SAM9263DESKV2 4246 +deluxe_r MACH_DELUXE_R DELUXE_R 4247 +p_98_v MACH_P_98_V P_98_V 4248 +p_98_c MACH_P_98_C P_98_C 4249 +davinci_am18xx_omn MACH_DAVINCI_AM18XX_OMN DAVINCI_AM18XX_OMN 4250 +socfpga_cyclone5 MACH_SOCFPGA_CYCLONE5 SOCFPGA_CYCLONE5 4251 +cabatuin MACH_CABATUIN CABATUIN 4252 +yoyopad_ft MACH_YOYOPAD_FT YOYOPAD_FT 4253 +dan2400evb MACH_DAN2400EVB DAN2400EVB 4254 +dan3400evb MACH_DAN3400EVB DAN3400EVB 4255 +edm_sf_imx6 MACH_EDM_SF_IMX6 EDM_SF_IMX6 4256 +edm_cf_imx6 MACH_EDM_CF_IMX6 EDM_CF_IMX6 4257 +vpos3xx MACH_VPOS3XX VPOS3XX 4258 +vulcano_9x5 MACH_VULCANO_9X5 VULCANO_9X5 4259 +spmp8000 MACH_SPMP8000 SPMP8000 4260 +catalina MACH_CATALINA CATALINA 4261 +rd88f5181l_fe MACH_RD88F5181L_FE RD88F5181L_FE 4262 +mx535_mx MACH_MX535_MX MX535_MX 4263 +armadillo840 MACH_ARMADILLO840 ARMADILLO840 4264 +spc9000baseboard MACH_SPC9000BASEBOARD SPC9000BASEBOARD 4265 +iris MACH_IRIS IRIS 4266 +protodcg MACH_PROTODCG PROTODCG 4267 +palmtree MACH_PALMTREE PALMTREE 4268 +novena MACH_NOVENA NOVENA 4269 +ma_um MACH_MA_UM MA_UM 4270 +ma_am MACH_MA_AM MA_AM 4271 +ems348 MACH_EMS348 EMS348 4272 +cm_fx6 MACH_CM_FX6 CM_FX6 4273 +arndale MACH_ARNDALE ARNDALE 4274 +q5xr5 MACH_Q5XR5 Q5XR5 4275 +willow MACH_WILLOW WILLOW 4276 +omap3621_odyv3 MACH_OMAP3621_ODYV3 OMAP3621_ODYV3 4277 +omapl138_presonus MACH_OMAPL138_PRESONUS OMAPL138_PRESONUS 4278 +dvf99 MACH_DVF99 DVF99 4279 +impression_j MACH_IMPRESSION_J IMPRESSION_J 4280 +qblissa9 MACH_QBLISSA9 QBLISSA9 4281 +robin_heliview10 MACH_ROBIN_HELIVIEW10 ROBIN_HELIVIEW10 4282 +sun7i MACH_SUN7I SUN7I 4283 +mx6q_hdmidongle MACH_MX6Q_HDMIDONGLE MX6Q_HDMIDONGLE 4284 +mx6_sid2 MACH_MX6_SID2 MX6_SID2 4285 +helios_v3 MACH_HELIOS_V3 HELIOS_V3 4286 +helios_v4 MACH_HELIOS_V4 HELIOS_V4 4287 +q7_imx6 MACH_Q7_IMX6 Q7_IMX6 4288 +odroidx MACH_ODROIDX ODROIDX 4289 +robpro MACH_ROBPRO ROBPRO 4290 +research59if_mk1 MACH_RESEARCH59IF_MK1 RESEARCH59IF_MK1 4291 +bobsleigh MACH_BOBSLEIGH BOBSLEIGH 4292 +dcshgwt3 MACH_DCSHGWT3 DCSHGWT3 4293 +gld1018 MACH_GLD1018 GLD1018 4294 +ev10 MACH_EV10 EV10 4295 +nitrogen6x MACH_NITROGEN6X NITROGEN6X 4296 +p_107_bb MACH_P_107_BB P_107_BB 4297 +evita_utl MACH_EVITA_UTL EVITA_UTL 4298 +falconwing MACH_FALCONWING FALCONWING 4299 +dct3 MACH_DCT3 DCT3 4300 +cpx2e_cell MACH_CPX2E_CELL CPX2E_CELL 4301 +amiro MACH_AMIRO AMIRO 4302 +mx6q_brassboard MACH_MX6Q_BRASSBOARD MX6Q_BRASSBOARD 4303 +dalmore MACH_DALMORE DALMORE 4304 +omap3_portal7cp MACH_OMAP3_PORTAL7CP OMAP3_PORTAL7CP 4305 +tegra_pluto MACH_TEGRA_PLUTO TEGRA_PLUTO 4306 +mx6sl_evk MACH_MX6SL_EVK MX6SL_EVK 4307 +m7 MACH_M7 M7 4308 +pxm2 MACH_PXM2 PXM2 4309 +haba_knx_lite MACH_HABA_KNX_LITE HABA_KNX_LITE 4310 +tai MACH_TAI TAI 4311 +prototd MACH_PROTOTD PROTOTD 4312 +dst_tonto MACH_DST_TONTO DST_TONTO 4313 +draco MACH_DRACO DRACO 4314 +dxr2 MACH_DXR2 DXR2 4315 +rut MACH_RUT RUT 4316 +am180x_wsc MACH_AM180X_WSC AM180X_WSC 4317 +deluxe_u MACH_DELUXE_U DELUXE_U 4318 +deluxe_ul MACH_DELUXE_UL DELUXE_UL 4319 +at91sam9260medths MACH_AT91SAM9260MEDTHS AT91SAM9260MEDTHS 4320 +matrix516 MACH_MATRIX516 MATRIX516 4321 +vid401x MACH_VID401X VID401X 4322 +helios_v5 MACH_HELIOS_V5 HELIOS_V5 4323 +playpaq2 MACH_PLAYPAQ2 PLAYPAQ2 4324 +igam MACH_IGAM IGAM 4325 +amico_i MACH_AMICO_I AMICO_I 4326 +amico_e MACH_AMICO_E AMICO_E 4327 +sentient_mm3_ck MACH_SENTIENT_MM3_CK SENTIENT_MM3_CK 4328 +smx6 MACH_SMX6 SMX6 4329 +pango MACH_PANGO PANGO 4330 +ns115_stick MACH_NS115_STICK NS115_STICK 4331 +bctrm3 MACH_BCTRM3 BCTRM3 4332 +doctorws MACH_DOCTORWS DOCTORWS 4333 +m2601 MACH_M2601 M2601 4334 +vgg1111 MACH_VGG1111 VGG1111 4337 +countach MACH_COUNTACH COUNTACH 4338 +visstrim_sm20 MACH_VISSTRIM_SM20 VISSTRIM_SM20 4339 +a639 MACH_A639 A639 4340 +spacemonkey MACH_SPACEMONKEY SPACEMONKEY 4341 +zpdu_stamp MACH_ZPDU_STAMP ZPDU_STAMP 4342 +htc_g7_clone MACH_HTC_G7_CLONE HTC_G7_CLONE 4343 +ft2080_corvus MACH_FT2080_CORVUS FT2080_CORVUS 4344 +fisland MACH_FISLAND FISLAND 4345 +zpdu MACH_ZPDU ZPDU 4346 +urt MACH_URT URT 4347 +conti_ovip MACH_CONTI_OVIP CONTI_OVIP 4348 +omapl138_nagra MACH_OMAPL138_NAGRA OMAPL138_NAGRA 4349 +da850_at3kp1 MACH_DA850_AT3KP1 DA850_AT3KP1 4350 +da850_at3kp2 MACH_DA850_AT3KP2 DA850_AT3KP2 4351 +surma MACH_SURMA SURMA 4352 +stm_b2092 MACH_STM_B2092 STM_B2092 4353 +mx535_ycr MACH_MX535_YCR MX535_YCR 4354 +m7_wl MACH_M7_WL M7_WL 4355 +m7_u MACH_M7_U M7_U 4356 +omap3_stndt_evm MACH_OMAP3_STNDT_EVM OMAP3_STNDT_EVM 4357 +m7_wlv MACH_M7_WLV M7_WLV 4358 +xam3517 MACH_XAM3517 XAM3517 4359 +a220 MACH_A220 A220 4360 +aclima_odie MACH_ACLIMA_ODIE ACLIMA_ODIE 4361 +vibble MACH_VIBBLE VIBBLE 4362 +k2_u MACH_K2_U K2_U 4363 +mx53_egf MACH_MX53_EGF MX53_EGF 4364 +novpek_imx53 MACH_NOVPEK_IMX53 NOVPEK_IMX53 4365 +novpek_imx6x MACH_NOVPEK_IMX6X NOVPEK_IMX6X 4366 +mx25_smartbox MACH_MX25_SMARTBOX MX25_SMARTBOX 4367 +eicg6410 MACH_EICG6410 EICG6410 4368 +picasso_e3 MACH_PICASSO_E3 PICASSO_E3 4369 +motonavigator MACH_MOTONAVIGATOR MOTONAVIGATOR 4370 +varioconnect2 MACH_VARIOCONNECT2 VARIOCONNECT2 4371 +deluxe_tw MACH_DELUXE_TW DELUXE_TW 4372 +kore3 MACH_KORE3 KORE3 4374 +mx6s_drs MACH_MX6S_DRS MX6S_DRS 4375 +cmimx6 MACH_CMIMX6 CMIMX6 4376 +roth MACH_ROTH ROTH 4377 +eq4ux MACH_EQ4UX EQ4UX 4378 +x1plus MACH_X1PLUS X1PLUS 4379 +modimx27 MACH_MODIMX27 MODIMX27 4380 +videon_hduac MACH_VIDEON_HDUAC VIDEON_HDUAC 4381 +blackbird MACH_BLACKBIRD BLACKBIRD 4382 +runmaster MACH_RUNMASTER RUNMASTER 4383 +ceres MACH_CERES CERES 4384 +nad435 MACH_NAD435 NAD435 4385 +ns115_proto_type MACH_NS115_PROTO_TYPE NS115_PROTO_TYPE 4386 +fs20_vcc MACH_FS20_VCC FS20_VCC 4387 +meson6tv_skt MACH_MESON6TV_SKT MESON6TV_SKT 4389 +keystone MACH_KEYSTONE KEYSTONE 4390 +pcm052 MACH_PCM052 PCM052 4391 +qrd_skud_prime MACH_QRD_SKUD_PRIME QRD_SKUD_PRIME 4393 +guf_santaro MACH_GUF_SANTARO GUF_SANTARO 4395 +sheepshead MACH_SHEEPSHEAD SHEEPSHEAD 4396 +mx6_iwg15m_mxm MACH_MX6_IWG15M_MXM MX6_IWG15M_MXM 4397 +mx6_iwg15m_q7 MACH_MX6_IWG15M_Q7 MX6_IWG15M_Q7 4398 +at91sam9263if8mic MACH_AT91SAM9263IF8MIC AT91SAM9263IF8MIC 4399 +marcopolo MACH_MARCOPOLO MARCOPOLO 4401 +mx535_sdcr MACH_MX535_SDCR MX535_SDCR 4402 +mx53_csb2733 MACH_MX53_CSB2733 MX53_CSB2733 4403 +diva MACH_DIVA DIVA 4404 +ncr_7744 MACH_NCR_7744 NCR_7744 4405 +macallan MACH_MACALLAN MACALLAN 4406 +wnr3500 MACH_WNR3500 WNR3500 4407 +pgavrf MACH_PGAVRF PGAVRF 4408 +helios_v6 MACH_HELIOS_V6 HELIOS_V6 4409 +lcct MACH_LCCT LCCT 4410 +csndug MACH_CSNDUG CSNDUG 4411 +wandboard_imx6 MACH_WANDBOARD_IMX6 WANDBOARD_IMX6 4412 +omap4_jet MACH_OMAP4_JET OMAP4_JET 4413 +tegra_roth MACH_TEGRA_ROTH TEGRA_ROTH 4414 +m7dcg MACH_M7DCG M7DCG 4415 +m7dug MACH_M7DUG M7DUG 4416 +m7dtg MACH_M7DTG M7DTG 4417 +ap42x MACH_AP42X AP42X 4418 +var_som_mx6 MACH_VAR_SOM_MX6 VAR_SOM_MX6 4419 +pdlu MACH_PDLU PDLU 4420 +hydrogen MACH_HYDROGEN HYDROGEN 4421 +npa211e MACH_NPA211E NPA211E 4422 +arcadia MACH_ARCADIA ARCADIA 4423 +arcadia_l MACH_ARCADIA_L ARCADIA_L 4424 +msm8930dt MACH_MSM8930DT MSM8930DT 4425 +ktam3874 MACH_KTAM3874 KTAM3874 4426 +cec4 MACH_CEC4 CEC4 4427 +ape6evm MACH_APE6EVM APE6EVM 4428 +tx6 MACH_TX6 TX6 4429 +cfa10037 MACH_CFA10037 CFA10037 4431 +ezp1000 MACH_EZP1000 EZP1000 4433 +wgr826v MACH_WGR826V WGR826V 4434 +exuma MACH_EXUMA EXUMA 4435 +fregate MACH_FREGATE FREGATE 4436 +osirisimx508 MACH_OSIRISIMX508 OSIRISIMX508 4437 +st_exigo MACH_ST_EXIGO ST_EXIGO 4438 +pismo MACH_PISMO PISMO 4439 +atc7 MACH_ATC7 ATC7 4440 +nspireclp MACH_NSPIRECLP NSPIRECLP 4441 +nspiretp MACH_NSPIRETP NSPIRETP 4442 +nspirecx MACH_NSPIRECX NSPIRECX 4443 +maya MACH_MAYA MAYA 4444 +wecct MACH_WECCT WECCT 4445 +m2s MACH_M2S M2S 4446 +msm8625q_evbd MACH_MSM8625Q_EVBD MSM8625Q_EVBD 4447 +tiny210 MACH_TINY210 TINY210 4448 +g3 MACH_G3 G3 4449 +hurricane MACH_HURRICANE HURRICANE 4450 +mx6_pod MACH_MX6_POD MX6_POD 4451 +elondcn MACH_ELONDCN ELONDCN 4452 +cwmx535 MACH_CWMX535 CWMX535 4453 +m7_wlj MACH_M7_WLJ M7_WLJ 4454 +qsp_arm MACH_QSP_ARM QSP_ARM 4455 +msm8625q_skud MACH_MSM8625Q_SKUD MSM8625Q_SKUD 4456 +htcmondrian MACH_HTCMONDRIAN HTCMONDRIAN 4457 +watson_ead MACH_WATSON_EAD WATSON_EAD 4458 +mitwoa MACH_MITWOA MITWOA 4459 +omap3_wolverine MACH_OMAP3_WOLVERINE OMAP3_WOLVERINE 4460 +mapletree MACH_MAPLETREE MAPLETREE 4461 +msm8625_fih_sae MACH_MSM8625_FIH_SAE MSM8625_FIH_SAE 4462 +epc35 MACH_EPC35 EPC35 4463 +smartrtu MACH_SMARTRTU SMARTRTU 4464 +rcm101 MACH_RCM101 RCM101 4465 +amx_imx53_mxx MACH_AMX_IMX53_MXX AMX_IMX53_MXX 4466 +acer_a12 MACH_ACER_A12 ACER_A12 4470 +sbc6x MACH_SBC6X SBC6X 4471 +u2 MACH_U2 U2 4472 +smdk4270 MACH_SMDK4270 SMDK4270 4473 +priscillag MACH_PRISCILLAG PRISCILLAG 4474 +priscillac MACH_PRISCILLAC PRISCILLAC 4475 +priscilla MACH_PRISCILLA PRISCILLA 4476 +innova_shpu_v2 MACH_INNOVA_SHPU_V2 INNOVA_SHPU_V2 4477 +mach_type_dep2410 MACH_MACH_TYPE_DEP2410 MACH_TYPE_DEP2410 4479 +bctre3 MACH_BCTRE3 BCTRE3 4480 +omap_m100 MACH_OMAP_M100 OMAP_M100 4481 +flo MACH_FLO FLO 4482 +nanobone MACH_NANOBONE NANOBONE 4483 +stm_b2105 MACH_STM_B2105 STM_B2105 4484 +omap4_bsc_bap_v3 MACH_OMAP4_BSC_BAP_V3 OMAP4_BSC_BAP_V3 4485 +ss1pam MACH_SS1PAM SS1PAM 4486 +primominiu MACH_PRIMOMINIU PRIMOMINIU 4488 +mrt_35hd_dualnas_e MACH_MRT_35HD_DUALNAS_E MRT_35HD_DUALNAS_E 4489 +kiwi MACH_KIWI KIWI 4490 +hw90496 MACH_HW90496 HW90496 4491 +mep2440 MACH_MEP2440 MEP2440 4492 +colibri_t30 MACH_COLIBRI_T30 COLIBRI_T30 4493 +cwv1 MACH_CWV1 CWV1 4494 +nsa325 MACH_NSA325 NSA325 4495 +dpxmtc MACH_DPXMTC DPXMTC 4497 +tt_stuttgart MACH_TT_STUTTGART TT_STUTTGART 4498 +miranda_apcii MACH_MIRANDA_APCII MIRANDA_APCII 4499 +mx6q_moderox MACH_MX6Q_MODEROX MX6Q_MODEROX 4500 +mudskipper MACH_MUDSKIPPER MUDSKIPPER 4501 +urania MACH_URANIA URANIA 4502 +stm_b2112 MACH_STM_B2112 STM_B2112 4503 +mx6q_ats_phoenix MACH_MX6Q_ATS_PHOENIX MX6Q_ATS_PHOENIX 4505 +stm_b2116 MACH_STM_B2116 STM_B2116 4506 +mythology MACH_MYTHOLOGY MYTHOLOGY 4507 +fc360v1 MACH_FC360V1 FC360V1 4508 +gps_sensor MACH_GPS_SENSOR GPS_SENSOR 4509 +gazelle MACH_GAZELLE GAZELLE 4510 +mpq8064_dma MACH_MPQ8064_DMA MPQ8064_DMA 4511 +wems_asd01 MACH_WEMS_ASD01 WEMS_ASD01 4512 +apalis_t30 MACH_APALIS_T30 APALIS_T30 4513 +armstonea9 MACH_ARMSTONEA9 ARMSTONEA9 4515 +omap_blazetablet MACH_OMAP_BLAZETABLET OMAP_BLAZETABLET 4516 +ar6mxq MACH_AR6MXQ AR6MXQ 4517 +ar6mxs MACH_AR6MXS AR6MXS 4518 +gwventana MACH_GWVENTANA GWVENTANA 4520 +igep0033 MACH_IGEP0033 IGEP0033 4521 +h52c1_concerto MACH_H52C1_CONCERTO H52C1_CONCERTO 4524 +fcmbrd MACH_FCMBRD FCMBRD 4525 +pcaaxs1 MACH_PCAAXS1 PCAAXS1 4526 +ls_orca MACH_LS_ORCA LS_ORCA 4527 +pcm051lb MACH_PCM051LB PCM051LB 4528 +mx6s_lp507_gvci MACH_MX6S_LP507_GVCI MX6S_LP507_GVCI 4529 +dido MACH_DIDO DIDO 4530 +swarco_itc3_9g20 MACH_SWARCO_ITC3_9G20 SWARCO_ITC3_9G20 4531 +robo_roady MACH_ROBO_ROADY ROBO_ROADY 4532 +rskrza1 MACH_RSKRZA1 RSKRZA1 4533 +swarco_sid MACH_SWARCO_SID SWARCO_SID 4534 +mx6_iwg15s_sbc MACH_MX6_IWG15S_SBC MX6_IWG15S_SBC 4535 +mx6q_camaro MACH_MX6Q_CAMARO MX6Q_CAMARO 4536 +hb6mxs MACH_HB6MXS HB6MXS 4537 +lager MACH_LAGER LAGER 4538 +lp8x4x MACH_LP8X4X LP8X4X 4539 +tegratab7 MACH_TEGRATAB7 TEGRATAB7 4540 +andromeda MACH_ANDROMEDA ANDROMEDA 4541 +bootes MACH_BOOTES BOOTES 4542 +nethmi MACH_NETHMI NETHMI 4543 +tegratab MACH_TEGRATAB TEGRATAB 4544 +som5_evb MACH_SOM5_EVB SOM5_EVB 4545 +venaticorum MACH_VENATICORUM VENATICORUM 4546 +stm_b2110 MACH_STM_B2110 STM_B2110 4547 +elux_hathor MACH_ELUX_HATHOR ELUX_HATHOR 4548 +helios_v7 MACH_HELIOS_V7 HELIOS_V7 4549 +xc10v1 MACH_XC10V1 XC10V1 4550 +cp2u MACH_CP2U CP2U 4551 +iap_f MACH_IAP_F IAP_F 4552 +iap_g MACH_IAP_G IAP_G 4553 +aae MACH_AAE AAE 4554 +pegasus MACH_PEGASUS PEGASUS 4555 +cygnus MACH_CYGNUS CYGNUS 4556 +centaurus MACH_CENTAURUS CENTAURUS 4557 +msm8930_qrd8930 MACH_MSM8930_QRD8930 MSM8930_QRD8930 4558 +quby_tim MACH_QUBY_TIM QUBY_TIM 4559 +zedi3250a MACH_ZEDI3250A ZEDI3250A 4560 +grus MACH_GRUS GRUS 4561 +apollo3 MACH_APOLLO3 APOLLO3 4562 +cowon_r7 MACH_COWON_R7 COWON_R7 4563 +tonga3 MACH_TONGA3 TONGA3 4564 +p535 MACH_P535 P535 4565 +sa3874i MACH_SA3874I SA3874I 4566 +mx6_navico_com MACH_MX6_NAVICO_COM MX6_NAVICO_COM 4567 +proxmobil2 MACH_PROXMOBIL2 PROXMOBIL2 4568 +ubinux1 MACH_UBINUX1 UBINUX1 4569 +istos MACH_ISTOS ISTOS 4570 +benvolio4 MACH_BENVOLIO4 BENVOLIO4 4571 +eco5_bx2 MACH_ECO5_BX2 ECO5_BX2 4572 +eukrea_cpuimx28sd MACH_EUKREA_CPUIMX28SD EUKREA_CPUIMX28SD 4573 +domotab MACH_DOMOTAB DOMOTAB 4574 +pfla03 MACH_PFLA03 PFLA03 4575 |
