diff options
Diffstat (limited to 'arch/arm')
298 files changed, 30446 insertions, 11098 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ab78d5c421fd..9773a3f730f3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration" config ARM bool default y + select HAVE_IDE select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select HAVE_OPROFILE @@ -223,7 +224,6 @@ config ARCH_CLPS7500 select TIMER_ACORN select ISA select NO_IOPORT - select HAVE_IDE help Support for the Cirrus Logic PS7500FE system-on-a-chip. @@ -247,13 +247,13 @@ config ARCH_EP93XX select ARM_AMBA select ARM_VIC select GENERIC_GPIO + select HAVE_GPIO_LIB help This enables support for the Cirrus EP93xx series of CPUs. config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE - select HAVE_IDE help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -292,7 +292,6 @@ config ARCH_IOP32X depends on MMU select PLAT_IOP select PCI - select HAVE_IDE help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -302,14 +301,12 @@ config ARCH_IOP33X depends on MMU select PLAT_IOP select PCI - select HAVE_IDE help Support for Intel's IOP33X (XScale) family of processors. config ARCH_IXP23XX bool "IXP23XX-based" depends on MMU - select HAVE_IDE select PCI help Support for Intel's IXP23xx (XScale) family of processors. @@ -327,14 +324,12 @@ config ARCH_IXP4XX select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS - select HAVE_IDE help Support for Intel's IXP4XX (XScale) family of processors. config ARCH_L7200 bool "LinkUp-L7200" select FIQ - select HAVE_IDE help Say Y here if you intend to run this kernel on a LinkUp Systems L7200 Software Development Board which uses an ARM720T processor. @@ -369,15 +364,17 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors -config ARCH_ORION +config ARCH_ORION5X bool "Marvell Orion" depends on MMU select PCI select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS + select PLAT_ORION help - Support for Marvell Orion System on Chip family. + Support for the following Marvell Orion 5x series SoCs: + Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.) config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" @@ -389,7 +386,6 @@ config ARCH_PXA depends on MMU select ARCH_MTD_XIP select GENERIC_GPIO - select HAVE_IDE select HAVE_GPIO_LIB select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -405,7 +401,6 @@ config ARCH_RPC select ARCH_MAY_HAVE_PC_FDC select ISA_DMA_API select NO_IOPORT - select HAVE_IDE help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -414,17 +409,20 @@ config ARCH_SA1100 bool "SA1100-based" select ISA select ARCH_DISCONTIGMEM_ENABLE + select ARCH_SPARSEMEM_ENABLE + select ARCH_SELECT_MEMORY_MODEL select ARCH_MTD_XIP select GENERIC_GPIO select GENERIC_TIME - select HAVE_IDE + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select HAVE_GPIO_LIB help Support for StrongARM 11x0 based boards. config ARCH_S3C2410 bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" select GENERIC_GPIO - select HAVE_IDE help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or @@ -432,7 +430,6 @@ config ARCH_S3C2410 config ARCH_SHARK bool "Shark" - select HAVE_IDE select ISA select ISA_DMA select PCI @@ -442,7 +439,6 @@ config ARCH_SHARK config ARCH_LH7A40X bool "Sharp LH7A40X" - select HAVE_IDE help Say Y here for systems based on one of the Sharp LH7A40X System on a Chip processors. These CPUs include an ARM922T @@ -460,6 +456,7 @@ config ARCH_DAVINCI config ARCH_OMAP bool "TI OMAP" select GENERIC_GPIO + select HAVE_GPIO_LIB select GENERIC_TIME select GENERIC_CLOCKEVENTS help @@ -508,7 +505,7 @@ source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" -source "arch/arm/mach-orion/Kconfig" +source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" @@ -555,6 +552,9 @@ config ARCH_ACORN config PLAT_IOP bool +config PLAT_ORION + bool + source arch/arm/mm/Kconfig config IWMMXT @@ -642,7 +642,7 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP + depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -675,7 +675,7 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && REALVIEW_EB_ARM11MP + depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) default y help Enable support for local timers on SMP platforms, rather then the @@ -766,6 +766,12 @@ config ARCH_DISCONTIGMEM_ENABLE or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +config ARCH_SPARSEMEM_ENABLE + bool + +config ARCH_SELECT_MEMORY_MODEL + bool + config NODES_SHIFT int default "4" if ARCH_LH7A40X @@ -1166,6 +1172,8 @@ source "drivers/dma/Kconfig" source "drivers/dca/Kconfig" +source "drivers/uio/Kconfig" + endmenu source "fs/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 79b8ca3400e0..1c840639f828 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -132,12 +132,11 @@ endif machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx - textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000 machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_KS8695) := ks8695 incdir-$(CONFIG_ARCH_MXC) := mxc machine-$(CONFIG_ARCH_MX3) := mx3 - machine-$(CONFIG_ARCH_ORION) := orion + machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_MSM7X00A) := msm ifeq ($(CONFIG_ARCH_EBSA110),y) @@ -183,6 +182,7 @@ core-$(CONFIG_VFP) += arch/arm/vfp/ # If we have a common platform directory, then include it in the build. core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ +core-$(CONFIG_PLAT_ORION) += arch/arm/plat-orion/ core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/ core-$(CONFIG_ARCH_MXC) += arch/arm/plat-mxc/ diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 25f12303b106..da226abce2d0 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -61,9 +61,15 @@ endif quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ - -C none -a $(ZRELADDR) -e $(ZRELADDR) \ + -C none -a $(LOADADDR) -e $(LOADADDR) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ +ifeq ($(CONFIG_ZBOOT_ROM),y) +$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) +else +$(obj)/uImage: LOADADDR=$(ZRELADDR) +endif + $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) @echo ' Image $@ is ready' diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 67ea99ef6521..dd3fbd6766e1 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -33,10 +33,6 @@ __XScale_start: bic r0, r0, #0x1000 @ clear Icache mcr p15, 0, r0, c1, c0, 0 -#ifdef CONFIG_ARCH_COTULLA_IDP - mov r7, #MACH_TYPE_COTULLA_IDP -#endif - #ifdef CONFIG_ARCH_IXP2000 mov r1, #-1 mov r0, #0xd6000000 diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index ae21755872ed..d973c986f721 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -321,11 +321,42 @@ static void locomo_gpio_unmask_irq(unsigned int irq) locomo_writel(r, mapbase + LOCOMO_GIE); } +static int GPIO_IRQ_rising_edge; +static int GPIO_IRQ_falling_edge; + +static int locomo_gpio_type(unsigned int irq, unsigned int type) +{ + unsigned int mask; + void __iomem *mapbase = get_irq_chip_data(irq); + + mask = 1 << (irq - LOCOMO_IRQ_GPIO_START); + + if (type == IRQT_PROBE) { + if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) + return 0; + type = __IRQT_RISEDGE | __IRQT_FALEDGE; + } + + if (type & __IRQT_RISEDGE) + GPIO_IRQ_rising_edge |= mask; + else + GPIO_IRQ_rising_edge &= ~mask; + if (type & __IRQT_FALEDGE) + GPIO_IRQ_falling_edge |= mask; + else + GPIO_IRQ_falling_edge &= ~mask; + locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE); + locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE); + + return 0; +} + static struct irq_chip locomo_gpio_chip = { - .name = "LOCOMO-gpio", - .ack = locomo_gpio_ack_irq, - .mask = locomo_gpio_mask_irq, - .unmask = locomo_gpio_unmask_irq, + .name = "LOCOMO-gpio", + .ack = locomo_gpio_ack_irq, + .mask = locomo_gpio_mask_irq, + .unmask = locomo_gpio_unmask_irq, + .set_type = locomo_gpio_type, }; static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc) @@ -450,22 +481,18 @@ static void locomo_setup_irq(struct locomo *lchip) set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip); set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase); set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler); - set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE); set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip); set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase); set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler); - set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE); set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip); set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase); set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler); - set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE); set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip); set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase); set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler); - set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE); /* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */ set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip); @@ -488,7 +515,7 @@ static void locomo_setup_irq(struct locomo *lchip) set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE); /* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */ - for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) { + for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) { set_irq_chip(irq, &locomo_spi_chip); set_irq_chip_data(irq, irqbase); set_irq_handler(irq, handle_edge_irq); @@ -574,20 +601,20 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state) save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPO); - save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPICT); /* SPI */ + save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */ locomo_writel(0x40, lchip->base + LOCOMO_SPICT); save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPE); save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ locomo_writel(0x00, lchip->base + LOCOMO_ASD); - save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPIMD); /* SPI */ - locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD); + save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); /* SPI */ + locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); locomo_writel(0x00, lchip->base + LOCOMO_PAIF); locomo_writel(0x00, lchip->base + LOCOMO_DAC); locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC); - if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) ) + if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88)) locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */ else /* 18MHz already enabled, so no wait */ @@ -616,10 +643,10 @@ static int locomo_resume(struct platform_device *dev) spin_lock_irqsave(&lchip->lock, flags); locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO); - locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT); + locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT); locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE); locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD); - locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD); + locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); locomo_writel(0x00, lchip->base + LOCOMO_C32K); locomo_writel(0x90, lchip->base + LOCOMO_TADC); @@ -688,9 +715,9 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) /* GPIO */ locomo_writel(0, lchip->base + LOCOMO_GPO); - locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14)) + locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14)) , lchip->base + LOCOMO_GPE); - locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14)) + locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14)) , lchip->base + LOCOMO_GPD); locomo_writel(0, lchip->base + LOCOMO_GIE); @@ -833,7 +860,10 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir spin_lock_irqsave(&lchip->lock, flags); r = locomo_readl(lchip->base + LOCOMO_GPD); - r &= ~bits; + if (dir) + r |= bits; + else + r &= ~bits; locomo_writel(r, lchip->base + LOCOMO_GPD); r = locomo_readl(lchip->base + LOCOMO_GPE); diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c index f53bca46e23c..aa8f7739c822 100644 --- a/arch/arm/common/rtctime.c +++ b/arch/arm/common/rtctime.c @@ -22,7 +22,6 @@ #include <linux/mutex.h> #include <asm/rtc.h> -#include <asm/semaphore.h> static DECLARE_WAIT_QUEUE_HEAD(rtc_wait); static struct fasync_struct *rtc_async_queue; diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 314ebd3a1d71..bc299b07a6fa 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/platform_device.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/hardware/scoop.h> /* PCMCIA to Scoop linkage @@ -30,10 +31,9 @@ struct scoop_pcmcia_config *platform_scoop_config; EXPORT_SYMBOL(platform_scoop_config); -#define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) - struct scoop_dev { - void *base; + void __iomem *base; + struct gpio_chip gpio; spinlock_t scoop_lock; unsigned short suspend_clr; unsigned short suspend_set; @@ -44,13 +44,84 @@ void reset_scoop(struct device *dev) { struct scoop_dev *sdev = dev_get_drvdata(dev); - SCOOP_REG(sdev->base,SCOOP_MCR) = 0x0100; // 00 - SCOOP_REG(sdev->base,SCOOP_CDR) = 0x0000; // 04 - SCOOP_REG(sdev->base,SCOOP_CCR) = 0x0000; // 10 - SCOOP_REG(sdev->base,SCOOP_IMR) = 0x0000; // 18 - SCOOP_REG(sdev->base,SCOOP_IRM) = 0x00FF; // 14 - SCOOP_REG(sdev->base,SCOOP_ISR) = 0x0000; // 1C - SCOOP_REG(sdev->base,SCOOP_IRM) = 0x0000; + iowrite16(0x0100, sdev->base + SCOOP_MCR); // 00 + iowrite16(0x0000, sdev->base + SCOOP_CDR); // 04 + iowrite16(0x0000, sdev->base + SCOOP_CCR); // 10 + iowrite16(0x0000, sdev->base + SCOOP_IMR); // 18 + iowrite16(0x00FF, sdev->base + SCOOP_IRM); // 14 + iowrite16(0x0000, sdev->base + SCOOP_ISR); // 1C + iowrite16(0x0000, sdev->base + SCOOP_IRM); +} + +static void __scoop_gpio_set(struct scoop_dev *sdev, + unsigned offset, int value) +{ + unsigned short gpwr; + + gpwr = ioread16(sdev->base + SCOOP_GPWR); + if (value) + gpwr |= 1 << (offset + 1); + else + gpwr &= ~(1 << (offset + 1)); + iowrite16(gpwr, sdev->base + SCOOP_GPWR); +} + +static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + unsigned long flags; + + spin_lock_irqsave(&sdev->scoop_lock, flags); + + __scoop_gpio_set(sdev, offset, value); + + spin_unlock_irqrestore(&sdev->scoop_lock, flags); +} + +static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + + /* XXX: I'm usure, but it seems so */ + return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)); +} + +static int scoop_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + unsigned long flags; + unsigned short gpcr; + + spin_lock_irqsave(&sdev->scoop_lock, flags); + + gpcr = ioread16(sdev->base + SCOOP_GPCR); + gpcr &= ~(1 << (offset + 1)); + iowrite16(gpcr, sdev->base + SCOOP_GPCR); + + spin_unlock_irqrestore(&sdev->scoop_lock, flags); + + return 0; +} + +static int scoop_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + unsigned long flags; + unsigned short gpcr; + + spin_lock_irqsave(&sdev->scoop_lock, flags); + + __scoop_gpio_set(sdev, offset, value); + + gpcr = ioread16(sdev->base + SCOOP_GPCR); + gpcr |= 1 << (offset + 1); + iowrite16(gpcr, sdev->base + SCOOP_GPCR); + + spin_unlock_irqrestore(&sdev->scoop_lock, flags); + + return 0; } unsigned short set_scoop_gpio(struct device *dev, unsigned short bit) @@ -60,8 +131,8 @@ unsigned short set_scoop_gpio(struct device *dev, unsigned short bit) struct scoop_dev *sdev = dev_get_drvdata(dev); spin_lock_irqsave(&sdev->scoop_lock, flag); - gpio_bit = SCOOP_REG(sdev->base, SCOOP_GPWR) | bit; - SCOOP_REG(sdev->base, SCOOP_GPWR) = gpio_bit; + gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit; + iowrite16(gpio_bit, sdev->base + SCOOP_GPWR); spin_unlock_irqrestore(&sdev->scoop_lock, flag); return gpio_bit; @@ -74,8 +145,8 @@ unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit) struct scoop_dev *sdev = dev_get_drvdata(dev); spin_lock_irqsave(&sdev->scoop_lock, flag); - gpio_bit = SCOOP_REG(sdev->base, SCOOP_GPWR) & ~bit; - SCOOP_REG(sdev->base,SCOOP_GPWR) = gpio_bit; + gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit; + iowrite16(gpio_bit, sdev->base + SCOOP_GPWR); spin_unlock_irqrestore(&sdev->scoop_lock, flag); return gpio_bit; @@ -87,13 +158,13 @@ EXPORT_SYMBOL(reset_scoop_gpio); unsigned short read_scoop_reg(struct device *dev, unsigned short reg) { struct scoop_dev *sdev = dev_get_drvdata(dev); - return SCOOP_REG(sdev->base,reg); + return ioread16(sdev->base + reg); } void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data) { struct scoop_dev *sdev = dev_get_drvdata(dev); - SCOOP_REG(sdev->base,reg)=data; + iowrite16(data, sdev->base + reg); } EXPORT_SYMBOL(reset_scoop); @@ -104,9 +175,9 @@ static void check_scoop_reg(struct scoop_dev *sdev) { unsigned short mcr; - mcr = SCOOP_REG(sdev->base, SCOOP_MCR); + mcr = ioread16(sdev->base + SCOOP_MCR); if ((mcr & 0x100) == 0) - SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101; + iowrite16(0x0101, sdev->base + SCOOP_MCR); } #ifdef CONFIG_PM @@ -115,8 +186,8 @@ static int scoop_suspend(struct platform_device *dev, pm_message_t state) struct scoop_dev *sdev = platform_get_drvdata(dev); check_scoop_reg(sdev); - sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); - SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; + sdev->scoop_gpwr = ioread16(sdev->base + SCOOP_GPWR); + iowrite16((sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set, sdev->base + SCOOP_GPWR); return 0; } @@ -126,7 +197,7 @@ static int scoop_resume(struct platform_device *dev) struct scoop_dev *sdev = platform_get_drvdata(dev); check_scoop_reg(sdev); - SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; + iowrite16(sdev->scoop_gpwr, sdev->base + SCOOP_GPWR); return 0; } @@ -135,11 +206,13 @@ static int scoop_resume(struct platform_device *dev) #define scoop_resume NULL #endif -int __init scoop_probe(struct platform_device *pdev) +static int __devinit scoop_probe(struct platform_device *pdev) { struct scoop_dev *devptr; struct scoop_config *inf; struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret; + int temp; if (!mem) return -EINVAL; @@ -154,40 +227,78 @@ int __init scoop_probe(struct platform_device *pdev) devptr->base = ioremap(mem->start, mem->end - mem->start + 1); if (!devptr->base) { - kfree(devptr); - return -ENOMEM; + ret = -ENOMEM; + goto err_ioremap; } platform_set_drvdata(pdev, devptr); - printk("Sharp Scoop Device found at 0x%08x -> 0x%08x\n",(unsigned int)mem->start,(unsigned int)devptr->base); + printk("Sharp Scoop Device found at 0x%08x -> 0x%8p\n",(unsigned int)mem->start, devptr->base); - SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140; + iowrite16(0x0140, devptr->base + SCOOP_MCR); reset_scoop(&pdev->dev); - SCOOP_REG(devptr->base, SCOOP_CPR) = 0x0000; - SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff; - SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff; + iowrite16(0x0000, devptr->base + SCOOP_CPR); + iowrite16(inf->io_dir & 0xffff, devptr->base + SCOOP_GPCR); + iowrite16(inf->io_out & 0xffff, devptr->base + SCOOP_GPWR); devptr->suspend_clr = inf->suspend_clr; devptr->suspend_set = inf->suspend_set; + devptr->gpio.base = -1; + + if (inf->gpio_base != 0) { + devptr->gpio.label = pdev->dev.bus_id; + devptr->gpio.base = inf->gpio_base; + devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */ + devptr->gpio.set = scoop_gpio_set; + devptr->gpio.get = scoop_gpio_get; + devptr->gpio.direction_input = scoop_gpio_direction_input; + devptr->gpio.direction_output = scoop_gpio_direction_output; + + ret = gpiochip_add(&devptr->gpio); + if (ret) + goto err_gpio; + } + return 0; + + if (devptr->gpio.base != -1) + temp = gpiochip_remove(&devptr->gpio); +err_gpio: + platform_set_drvdata(pdev, NULL); +err_ioremap: + iounmap(devptr->base); + kfree(devptr); + + return ret; } -static int scoop_remove(struct platform_device *pdev) +static int __devexit scoop_remove(struct platform_device *pdev) { struct scoop_dev *sdev = platform_get_drvdata(pdev); - if (sdev) { - iounmap(sdev->base); - kfree(sdev); - platform_set_drvdata(pdev, NULL); + int ret; + + if (!sdev) + return -EINVAL; + + if (sdev->gpio.base != -1) { + ret = gpiochip_remove(&sdev->gpio); + if (ret) { + dev_err(&pdev->dev, "Can't remove gpio chip: %d\n", ret); + return ret; + } } + + platform_set_drvdata(pdev, NULL); + iounmap(sdev->base); + kfree(sdev); + return 0; } static struct platform_driver scoop_driver = { .probe = scoop_probe, - .remove = scoop_remove, + .remove = __devexit_p(scoop_remove), .suspend = scoop_suspend, .resume = scoop_resume, .driver = { @@ -195,7 +306,7 @@ static struct platform_driver scoop_driver = { }, }; -int __init scoop_init(void) +static int __init scoop_init(void) { return platform_driver_register(&scoop_driver); } diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig new file mode 100644 index 000000000000..5e68420f4680 --- /dev/null +++ b/arch/arm/configs/am200epdkit_defconfig @@ -0,0 +1,1149 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25 +# Sun Apr 20 00:29:49 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="gum" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_SHMEM is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +CONFIG_ARCH_GUMSTIX=y +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +CONFIG_MACH_GUMSTIX_F=y +CONFIG_PXA25x=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +# CONFIG_IWMMXT is not set +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +# CONFIG_PCMCIA_IOCTL is not set + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=2 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_BLK_DEV_HD_ONLY is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +CONFIG_SMC91X=m +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SA1100_WATCHDOG=m + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_PARAMETERS=y +CONFIG_FB_MBX=m +# CONFIG_FB_METRONOME is not set +CONFIG_FB_VIRTUAL=m +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index e10d003566d6..2dbbbc3d4ac3 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -620,14 +620,14 @@ CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 834dddb51314..6e994f7820c6 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -594,14 +594,14 @@ CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 46b0c734aeb9..f659c938473f 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -1,43 +1,56 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc6 -# Fri Nov 17 18:42:21 2006 +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 8 22:20:50 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -53,30 +66,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -108,12 +121,16 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -121,29 +138,52 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # +# Boot options +# + +# +# Power management +# + +# # Atmel AT91 System-on-Chip # # CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_AT91SAM9260=y # CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9260 Variants +# +# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set # -# AT91SAM9260 Board Type +# AT91SAM9260 / AT91SAM9XE Board Type # CONFIG_MACH_AT91SAM9260EK=y +# CONFIG_MACH_CAM60 is not set +# CONFIG_MACH_SAM9_L9260 is not set # # AT91 Board Options # +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set # # AT91 Feature Selections # -# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=100 # # Processor Type @@ -166,19 +206,19 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 @@ -191,8 +231,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -203,6 +247,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -228,7 +273,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -238,13 +283,9 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -263,33 +304,23 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -302,10 +333,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -315,7 +342,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -324,34 +361,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -360,15 +380,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -388,6 +412,8 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -395,43 +421,72 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_ATA is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support +# USB Network Adapters # -# CONFIG_NETDEVICES is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -439,6 +494,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -448,7 +504,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -458,6 +513,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -492,114 +548,131 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y # -# Ftape, the floppy tape device driver +# I2C Algorithms # -# CONFIG_RAW_DRIVER is not set +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# TPM devices +# I2C Hardware Bus support # -# CONFIG_TCG_TPM is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA is not set # -# I2C support +# Miscellaneous I2C Chip support # -# CONFIG_I2C is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Misc devices +# Watchdog Device Drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9_WATCHDOG=y # -# LED devices +# USB-based Watchdog Cards # -# CONFIG_NEW_LEDS is not set +# CONFIG_USBPCWATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -610,7 +683,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -619,9 +692,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -640,6 +715,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -650,43 +726,10 @@ CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -708,6 +751,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -717,6 +761,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -727,13 +772,19 @@ CONFIG_USB_MON=y # USB Gadget Support # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_AT91=y CONFIG_USB_AT91=y # CONFIG_USB_GADGET_DUMMY_HCD is not set @@ -745,17 +796,56 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# MMC/SD Card support +# RTC interfaces # -# CONFIG_MMC is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# Real Time Clock +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers # -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y # # File systems @@ -806,7 +896,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -825,10 +914,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -836,17 +922,12 @@ CONFIG_CRAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -887,41 +968,49 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -932,18 +1021,21 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index fcd8fa091e9d..3802e85f7483 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -1,43 +1,56 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc6 -# Fri Nov 17 18:00:38 2006 +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 8 22:21:49 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -53,30 +66,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -108,12 +121,16 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -121,14 +138,27 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # +# Boot options +# + +# +# Power management +# + +# # Atmel AT91 System-on-Chip # # CONFIG_ARCH_AT91RM9200 is not set # CONFIG_ARCH_AT91SAM9260 is not set CONFIG_ARCH_AT91SAM9261=y +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # # AT91SAM9261 Board Type @@ -138,12 +168,15 @@ CONFIG_MACH_AT91SAM9261EK=y # # AT91 Board Options # +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set # # AT91 Feature Selections # -# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=100 # # Processor Type @@ -166,19 +199,19 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 @@ -191,8 +224,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -203,6 +240,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -228,7 +266,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -238,13 +276,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -266,30 +304,20 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -302,10 +330,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -315,7 +339,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -324,20 +358,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -350,12 +378,14 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -375,7 +405,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -386,6 +415,8 @@ CONFIG_MTD_CFI_I2=y # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -397,35 +428,24 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set CONFIG_MTD_NAND_AT91=y # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -434,15 +454,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -462,6 +486,8 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -469,75 +495,49 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -545,10 +545,6 @@ CONFIG_DM9000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -556,6 +552,7 @@ CONFIG_DM9000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -565,23 +562,43 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # @@ -609,75 +626,47 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_PCA is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -686,70 +675,125 @@ CONFIG_I2C_AT91=y # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y # -# Dallas's 1-wire bus +# SPI Master Controller Drivers # -# CONFIG_W1 is not set +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set # -# Hardware Monitoring support +# SPI Protocol Masters # +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Misc devices +# Watchdog Device Drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9_WATCHDOG=y # -# LED devices +# USB-based Watchdog Cards # -# CONFIG_NEW_LEDS is not set +# CONFIG_USBPCWATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D15605 is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_INTSRAM is not set +# CONFIG_FB_ATMEL_STN is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set # # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -760,7 +804,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -769,9 +813,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -790,6 +836,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -800,43 +847,10 @@ CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -858,6 +872,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -867,6 +882,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -877,13 +893,19 @@ CONFIG_USB_MON=y # USB Gadget Support # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_AT91=y CONFIG_USB_AT91=y # CONFIG_USB_GADGET_DUMMY_HCD is not set @@ -895,21 +917,73 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -CONFIG_MMC_AT91=m -# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +CONFIG_MMC_AT91=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y # # File systems @@ -960,7 +1034,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -973,7 +1046,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set @@ -981,10 +1053,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -992,17 +1061,12 @@ CONFIG_CRAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1043,41 +1107,49 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1088,18 +1160,21 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index c72ab82873d5..32a0d74e0c89 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -1,12 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc1 -# Mon Jan 8 16:06:54 2007 +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 8 22:12:20 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -15,32 +21,36 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -56,32 +66,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -113,13 +121,16 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -127,15 +138,27 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # +# Boot options +# + +# +# Power management +# + +# # Atmel AT91 System-on-Chip # # CONFIG_ARCH_AT91RM9200 is not set # CONFIG_ARCH_AT91SAM9260 is not set # CONFIG_ARCH_AT91SAM9261 is not set CONFIG_ARCH_AT91SAM9263=y +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # # AT91SAM9263 Board Type @@ -152,6 +175,8 @@ CONFIG_MTD_AT91_DATAFLASH_CARD=y # AT91 Feature Selections # # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=100 # # Processor Type @@ -174,19 +199,19 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 @@ -199,8 +224,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -211,6 +240,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -236,7 +266,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -246,7 +276,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -271,6 +300,7 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -281,20 +311,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -307,10 +325,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -320,7 +334,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -329,20 +353,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -362,6 +380,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -381,7 +400,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -405,35 +423,24 @@ CONFIG_MTD_DATAFLASH=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set CONFIG_MTD_NAND_AT91=y # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -443,15 +450,18 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -473,6 +483,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -480,80 +491,65 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -561,10 +557,6 @@ CONFIG_MII=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -572,6 +564,7 @@ CONFIG_MII=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -581,20 +574,26 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set @@ -603,6 +602,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_INPUT_MISC is not set # @@ -636,71 +636,47 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_PCA is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -722,61 +698,80 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Misc devices +# Watchdog Device Drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9_WATCHDOG=y # -# LED devices +# USB-based Watchdog Cards # -# CONFIG_NEW_LEDS is not set +# CONFIG_USBPCWATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D15605 is not set # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -784,26 +779,28 @@ CONFIG_FB=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# HID Devices +# USB Input Devices # -CONFIG_HID=y +# CONFIG_USB_HID is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -814,9 +811,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -824,9 +820,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -845,6 +843,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -856,43 +855,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -914,6 +880,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -923,6 +890,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -933,13 +901,19 @@ CONFIG_USB_MON=y # USB Gadget Support # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_AT91=y CONFIG_USB_AT91=y # CONFIG_USB_GADGET_DUMMY_HCD is not set @@ -951,21 +925,73 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -CONFIG_MMC_AT91=m -# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +CONFIG_MMC_AT91=m +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y # # File systems @@ -1016,7 +1042,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1032,10 +1057,12 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y @@ -1044,10 +1071,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set @@ -1057,6 +1081,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1064,17 +1089,12 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1115,36 +1135,35 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1152,9 +1171,13 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1165,10 +1188,7 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1177,8 +1197,13 @@ CONFIG_DEBUG_LL=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index fbe8b3049343..98e6746d02be 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -1,15 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21 -# Mon May 7 16:30:40 2007 +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 8 22:24:14 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -23,27 +26,28 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -62,32 +66,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -119,14 +121,16 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -134,9 +138,18 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # +# Boot options +# + +# +# Power management +# + +# # Atmel AT91 System-on-Chip # # CONFIG_ARCH_AT91RM9200 is not set @@ -144,6 +157,8 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_AT91SAM9261 is not set # CONFIG_ARCH_AT91SAM9263 is not set CONFIG_ARCH_AT91SAM9RL=y +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # # AT91SAM9RL Board Type @@ -157,7 +172,9 @@ CONFIG_MACH_AT91SAM9RLEK=y # # AT91 Feature Selections # -# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=100 # # Processor Type @@ -185,15 +202,14 @@ CONFIG_CPU_CP15_MMU=y # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 @@ -206,9 +222,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -245,6 +264,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -254,7 +274,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set @@ -271,10 +290,6 @@ CONFIG_UNIX=y # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -284,7 +299,16 @@ CONFIG_UNIX=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -293,21 +317,14 @@ CONFIG_UNIX=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -327,6 +344,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -346,7 +364,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -370,36 +387,23 @@ CONFIG_MTD_DATAFLASH=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set CONFIG_MTD_NAND_AT91=y # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -410,12 +414,16 @@ CONFIG_BLK_DEV_RAM_SIZE=24576 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -437,6 +445,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -444,47 +453,13 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# # CONFIG_NETDEVICES is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -492,6 +467,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -501,7 +477,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -511,8 +486,10 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set @@ -521,6 +498,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_INPUT_MISC is not set # @@ -554,37 +532,50 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y # -# TPM devices +# I2C Algorithms # -# CONFIG_TCG_TPM is not set +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# I2C support +# I2C Hardware Bus support # -# CONFIG_I2C is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support @@ -603,21 +594,25 @@ CONFIG_SPI_ATMEL=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Hardware Monitoring support +# Watchdog Device Drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9_WATCHDOG=y # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -625,37 +620,28 @@ CONFIG_SPI_ATMEL=y # CONFIG_MFD_SM501 is not set # -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -665,9 +651,16 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # Frame buffer hardware drivers # +# CONFIG_FB_S1D15605 is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_ATMEL=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -675,97 +668,97 @@ CONFIG_FB_ATMEL=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # # Sound # -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_SEQUENCER=y -CONFIG_SND_SEQ_DUMMY=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -CONFIG_SND_DEBUG_DETECT=y -# CONFIG_SND_PCM_XRUN_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set # -# ALSA ARM devices +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# SoC audio support +# USB Gadget Support # -# CONFIG_SND_SOC is not set +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# Open Sound System +# MMC/SD Card Drivers # -# CONFIG_SOUND_PRIME is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# HID Devices +# MMC/SD Host Controller Drivers # -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_MMC_AT91=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# USB support +# RTC interfaces # -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# I2C RTC drivers # +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # -# USB Gadget Support +# SPI RTC drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set # -# MMC/SD Card support +# Platform RTC drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_AT91=y +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Real Time Clock +# on-CPU RTC drivers # -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_DRV_AT91SAM9=y # # File systems @@ -816,7 +809,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -836,20 +828,13 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -890,16 +875,15 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -907,8 +891,8 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set @@ -916,6 +900,9 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -923,10 +910,13 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -937,10 +927,7 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -949,9 +936,12 @@ CONFIG_DEBUG_LL=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index baa97698c744..d846a492e5ce 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -714,7 +714,7 @@ CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # -CONFIG_I2C_AT91=m +CONFIG_I2C_GPIO=m # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig new file mode 100644 index 000000000000..f3cd4a95373a --- /dev/null +++ b/arch/arm/configs/cam60_defconfig @@ -0,0 +1,1228 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24 +# Thu Mar 6 10:07:26 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_AUDIT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +CONFIG_LBD=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_AT91SAM9260=y +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9260 Variants +# +# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set + +# +# AT91SAM9260 / AT91SAM9XE Board Type +# +# CONFIG_MACH_AT91SAM9260EK is not set +CONFIG_MACH_CAM60=y +# CONFIG_MACH_SAM9_L9260 is not set + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0x20004000 +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=y +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_NETWORK_SECMARK=y +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m +CONFIG_MAC80211_RCSIMPLE=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_RAM=m +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_PLATRAM=m + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set +CONFIG_MTD_NAND_AT91_ECC_HW=y +# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=y +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +# CONFIG_SCSI_FC_TGT_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +# CONFIG_ICPLUS_PHY is not set +CONFIG_FIXED_PHY=m +# CONFIG_FIXED_MII_10_FDX is not set +# CONFIG_FIXED_MII_100_FDX is not set +# CONFIG_FIXED_MII_1000_FDX is not set +CONFIG_FIXED_MII_AMNT=1 +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_SUNKBD=m +CONFIG_KEYBOARD_LKKBD=m +CONFIG_KEYBOARD_XTKBD=m +CONFIG_KEYBOARD_NEWTON=m +CONFIG_KEYBOARD_STOWAWAY=m +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_VSXXXAA=m +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_TEST=m + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_RTC_DRV_AT91SAM9_RTT=0 +CONFIG_RTC_DRV_AT91SAM9_GPBR=0 + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ABLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +# CONFIG_CRYPTO_XTS is not set +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=m +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=m +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 88e5d28aeec7..67e65e4f0cdc 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -1,69 +1,96 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15 -# Mon Jan 9 21:51:31 2006 +# Linux kernel version: 2.6.24-rc7 +# Wed Jan 9 22:19:24 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -81,62 +108,101 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200=y # -# AT91RM9200 Implementations +# Boot options # # +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# # AT91RM9200 Board Type # +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set CONFIG_MACH_CSB337=y # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_CARMEVA is not set -# CONFIG_MACH_KB9200 is not set # CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_CHUB is not set +# CONFIG_MACH_HOMEMATIC is not set +# CONFIG_MACH_ECBAT91 is not set +# CONFIG_MACH_SWEDATMS is not set + +# +# AT91 Board Options +# # -# AT91RM9200 Feature Selections +# AT91 Feature Selections # CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=128 # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -145,15 +211,13 @@ CONFIG_CPU_TLB_V4WBI=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -168,8 +232,13 @@ CONFIG_AT91_CF=y # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=128 +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -178,9 +247,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_LEDS=y -CONFIG_LEDS_TIMER=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -191,6 +264,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -215,6 +289,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -227,6 +302,10 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -243,23 +322,26 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -269,13 +351,8 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -285,7 +362,17 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -294,19 +381,14 @@ CONFIG_TCP_CONG_BIC=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -319,11 +401,14 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -349,15 +434,14 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0 -CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -368,7 +452,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -378,29 +461,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set # CONFIG_MTD_AT91_DATAFLASH is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -409,13 +478,12 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # CONFIG_IDE is not set # @@ -423,6 +491,9 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -441,97 +512,61 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -539,26 +574,23 @@ CONFIG_ARM_AT91_ETHER=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -568,6 +600,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -583,6 +616,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -601,152 +635,114 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91RM9200_WATCHDOG=y - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set CONFIG_AT91_SPI=y CONFIG_AT91_SPIDEV=y - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Multimedia devices +# Watchdog Device Drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -758,12 +754,25 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -771,7 +780,7 @@ CONFIG_USB_DEBUG=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -780,9 +789,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -801,59 +812,21 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -866,15 +839,18 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set @@ -899,14 +875,20 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=y +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set CONFIG_USB_EZUSB=y # @@ -914,16 +896,22 @@ CONFIG_USB_EZUSB=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -934,13 +922,19 @@ CONFIG_USB_EZUSB=y # USB Gadget Support # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_AT91=y CONFIG_USB_AT91=y # CONFIG_USB_GADGET_DUMMY_HCD is not set @@ -950,22 +944,28 @@ CONFIG_USB_AT91=y # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -CONFIG_MMC_AT91RM9200=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +# CONFIG_MMC_AT91 is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc1" +# CONFIG_RTC_DEBUG is not set # # RTC interfaces @@ -974,39 +974,60 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc1" CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_AT91RM9200=y -# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91RM9200=y + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1030,11 +1051,12 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1046,7 +1068,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set @@ -1054,10 +1075,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1070,6 +1088,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1077,43 +1096,56 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1124,12 +1156,13 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y @@ -1138,7 +1171,15 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1149,20 +1190,27 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 669f035896f9..99702146c9fc 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -1,69 +1,112 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15 -# Mon Jan 9 21:52:00 2006 +# Linux kernel version: 2.6.25-rc8 +# Fri Apr 4 22:06:15 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -77,66 +120,111 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# # -# AT91RM9200 Implementations +# Atmel AT91 System-on-Chip # +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # # AT91RM9200 Board Type # +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set # CONFIG_MACH_CSB337 is not set CONFIG_MACH_CSB637=y # CONFIG_MACH_CARMEVA is not set -# CONFIG_MACH_KB9200 is not set # CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set # -# AT91RM9200 Feature Selections +# AT91 Board Options +# + +# +# AT91 Feature Selections # CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=128 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -145,15 +233,13 @@ CONFIG_CPU_TLB_V4WBI=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -168,8 +254,13 @@ CONFIG_AT91_CF=y # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=128 +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -178,9 +269,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_LEDS=y -CONFIG_LEDS_TIMER=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -191,6 +286,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -215,6 +311,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -227,6 +324,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -243,23 +345,26 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -269,13 +374,8 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -283,9 +383,20 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -294,19 +405,14 @@ CONFIG_TCP_CONG_BIC=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -319,11 +425,14 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -349,15 +458,14 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0 -CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -368,7 +476,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -377,30 +484,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_AT91_DATAFLASH is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -409,13 +501,15 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_ATMEL_PWM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ATMEL_SSC is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -423,6 +517,9 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -441,114 +538,78 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_CS89x0 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -558,7 +619,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -568,6 +628,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -583,6 +644,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -595,64 +657,29 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91RM9200_WATCHDOG=y - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_AT91RM9200_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set -CONFIG_AT91_SPI=y -CONFIG_AT91_SPIDEV=y - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -665,43 +692,53 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # -# Hardware Monitoring support +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -715,39 +752,72 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Misc devices +# Watchdog Device Drivers # +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y # -# Multimedia Capabilities Port drivers +# USB-based Watchdog Cards # +# CONFIG_USBPCWATCHDOG is not set # -# Multimedia devices +# Sonics Silicon Backplane # -# CONFIG_VIDEO_DEV is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -759,20 +829,34 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -781,9 +865,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -802,80 +888,42 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set @@ -883,6 +931,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set CONFIG_USB_SERIAL_KEYSPAN=y CONFIG_USB_SERIAL_KEYSPAN_MPR=y @@ -900,46 +949,66 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=y +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y +# CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# USB DSL modem support +# LED drivers # +CONFIG_LEDS_GPIO=y # -# USB Gadget Support +# LED Triggers # -# CONFIG_USB_GADGET is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set # -# MMC/SD Card support +# Userspace I/O # -# CONFIG_MMC is not set +# CONFIG_UIO is not set # # File systems @@ -948,16 +1017,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -979,11 +1049,12 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -995,18 +1066,16 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1019,6 +1088,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1026,45 +1096,57 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1073,12 +1155,14 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y @@ -1087,7 +1171,18 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1098,20 +1193,29 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig new file mode 100644 index 000000000000..90ed214e3673 --- /dev/null +++ b/arch/arm/configs/ecbat91_defconfig @@ -0,0 +1,1315 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc4 +# Sat Jun 9 01:30:18 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Atmel AT91 System-on-Chip +# +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set + +# +# AT91RM9200 Board Type +# +# CONFIG_MACH_ONEARM is not set +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_CHUB is not set +CONFIG_MACH_ECBAT91=y + +# +# AT91 Board Options +# +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_AT91_CF=y + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y +# CONFIG_MAC80211_DEBUG is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +CONFIG_IEEE80211_SOFTMAC=y +CONFIG_IEEE80211_SOFTMAC_DEBUG=y +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_AT91RM9200_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_AT91_SPI is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ATMEL is not set +CONFIG_SPI_BITBANG=y +CONFIG_SPI_AT91=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_AT91=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91RM9200=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_USER=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index a0f48d54fbcc..ae51a40db6f9 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -587,14 +587,14 @@ CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig new file mode 100644 index 000000000000..4d11678584db --- /dev/null +++ b/arch/arm/configs/magician_defconfig @@ -0,0 +1,1182 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Sun Dec 30 13:02:54 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_MACH_MAGICIAN=y +CONFIG_PXA27x=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="keepinitrd" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +# CONFIG_IRNET is not set +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +CONFIG_IRDA_DEBUG=y + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +CONFIG_PXA_FICP=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=0 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x04000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_PXA2XX is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +# CONFIG_SERIAL_PXA_CONSOLE is not set +CONFIG_SERIAL_CORE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=m +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_DS1WM=y + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +CONFIG_W1_SLAVE_DS2760=y +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=y +# CONFIG_APM_POWER is not set +CONFIG_BATTERY_DS2760=y +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_HTC_EGPIO=y +CONFIG_HTC_PASIC3=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_HID=m +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_NEW_LEDS=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_DEBUG=y + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1251=m +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig index 0e5794c6a48e..7dc1580e4d99 100644 --- a/arch/arm/configs/ns9xxx_defconfig +++ b/arch/arm/configs/ns9xxx_defconfig @@ -1,621 +1,79 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Thu Feb 15 20:51:47 2007 -# -CONFIG_ARM=y -# CONFIG_GENERIC_TIME is not set -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# +CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_L7200 is not set CONFIG_ARCH_NS9XXX=y -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set - -# -# NS9xxx Implementations -# +CONFIG_MACH_A9M9360=y +CONFIG_MACH_A9M9750=y +CONFIG_MACH_CC7UCAMRY=y +CONFIG_MACH_CC9C=y +CONFIG_MACH_CC9P9210=y +CONFIG_MACH_CC9P9210JS=y +CONFIG_MACH_CC9P9215=y +CONFIG_MACH_CC9P9215JS=y CONFIG_MACH_CC9P9360DEV=y -CONFIG_PROCESSOR_NS9360=y -CONFIG_BOARD_A9M9750DEV=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set - -# -# Bus support -# - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -CONFIG_HZ=100 -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# +CONFIG_MACH_CC9P9360JS=y +CONFIG_MACH_CC9P9360VAL=y +CONFIG_MACH_CC9P9750DEV=y +CONFIG_MACH_CC9P9750VAL=y +CONFIG_MACH_CCW9C=y +CONFIG_MACH_INC20OTTER=y +CONFIG_MACH_OTTER=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set -# CONFIG_APM is not set - -# -# Networking -# -# CONFIG_NET is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y +CONFIG_NET=y +CONFIG_PACKET=m +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_SYN_COOKIES=y +CONFIG_MTD=m +CONFIG_MTD_CONCAT=m +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_BLK_DEV_LOOP=m +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_NS9XXX_ETH=y # CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_SHARE_IRQ is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y +CONFIG_SERIAL_NS921X=y +CONFIG_SERIAL_NS921X_CONSOLE=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +CONFIG_ADC_NS9215=m +CONFIG_I2C=m +CONFIG_I2C_GPIO=m # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# # CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y +# CONFIG_HID_DEBUG is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_RTC_CLASS=m +CONFIG_RTC_DRV_NS9215=m +CONFIG_EXT2_FS=m CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set +CONFIG_JFFS2_FS=m +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y # CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_ICEDCC=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/orion_defconfig b/arch/arm/configs/orion5x_defconfig index 1e5aaa645fcd..52cd99bd52fb 100644 --- a/arch/arm/configs/orion_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -140,7 +140,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_MXC is not set -CONFIG_ARCH_ORION=y +CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig index 3c0c4f192dc1..95a22f512805 100644 --- a/arch/arm/configs/picotux200_defconfig +++ b/arch/arm/configs/picotux200_defconfig @@ -727,14 +727,14 @@ CONFIG_I2C_CHARDEV=m # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=m +CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig new file mode 100644 index 000000000000..484dc9739dfc --- /dev/null +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -0,0 +1,1098 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23 +# Sun Oct 14 02:01:07 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +CONFIG_AUDIT=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_AT91SAM9260=y +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set + +# +# AT91SAM9260 Variants +# +# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set + +# +# AT91SAM9260 / AT91SAM9XE Board Type +# +# CONFIG_MACH_AT91SAM9260EK is not set +# CONFIG_MACH_CAM60 is not set +CONFIG_MACH_SAM9_L9260=y + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +# CONFIG_ATMEL_TCLIB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=3 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +# CONFIG_MISC_DEVICES is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_AT91=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +CONFIG_RTC_DRV_DS1553=y +# CONFIG_RTC_DRV_STK17TA8 is not set +CONFIG_RTC_DRV_DS1742=y +CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T59 is not set +CONFIG_RTC_DRV_V3020=y + +# +# on-CPU RTC drivers +# + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig new file mode 100644 index 000000000000..576b8339f0d6 --- /dev/null +++ b/arch/arm/configs/tct_hammer_defconfig @@ -0,0 +1,886 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc7-hammer +# Thu Mar 27 16:39:48 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +# CONFIG_BUG is not set +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_SHMEM is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLAB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set +CONFIG_PLAT_S3C24XX=y +# CONFIG_S3C2410_DMA is not set +CONFIG_PLAT_S3C=y +CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y +CONFIG_CPU_LLSERIAL_S3C2410=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_ERROR_RESET is not set + +# +# Power management +# +CONFIG_S3C_LOWLEVEL_UART_PORT=0 + +# +# S3C2400 Machines +# +CONFIG_CPU_S3C2410=y +CONFIG_S3C2410_GPIO=y +CONFIG_S3C2410_CLOCK=y + +# +# S3C2410 Machines +# +# CONFIG_ARCH_SMDK2410 is not set +# CONFIG_ARCH_H1940 is not set +# CONFIG_MACH_N30 is not set +# CONFIG_ARCH_BAST is not set +# CONFIG_MACH_OTOM is not set +# CONFIG_MACH_AML_M5900 is not set +CONFIG_MACH_TCT_HAMMER=y +# CONFIG_MACH_VR1000 is not set +# CONFIG_MACH_QT2410 is not set + +# +# S3C2412 Machines +# +# CONFIG_MACH_SMDK2413 is not set +# CONFIG_MACH_SMDK2412 is not set +# CONFIG_MACH_VSTMS is not set + +# +# S3C2440 Machines +# +# CONFIG_MACH_ANUBIS is not set +# CONFIG_MACH_OSIRIS is not set +# CONFIG_MACH_RX3715 is not set +# CONFIG_ARCH_S3C2440 is not set +# CONFIG_MACH_NEXCODER_2440 is not set + +# +# S3C2442 Machines +# + +# +# S3C2443 Machines +# +# CONFIG_MACH_SMDK2443 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=200 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +# CONFIG_INET is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=10240 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_S3C2410=y +CONFIG_SERIAL_S3C2410_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_S3C2410=y +CONFIG_USB_S3C2410=y +# CONFIG_USB_S3C2410_DEBUG is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_SYSCTL is not set +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_S3C_PORT is not set +CONFIG_DEBUG_S3C_UART=0 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig new file mode 100644 index 000000000000..26de37f74686 --- /dev/null +++ b/arch/arm/configs/yl9200_defconfig @@ -0,0 +1,1216 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Fri Jan 11 09:53:59 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91RM9200 Board Type +# +# CONFIG_MACH_ONEARM is not set +CONFIG_ARCH_AT91RM9200DK=y +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +CONFIG_MACH_YL9200=y + +# +# AT91 Board Options +# +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=3 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_DEBUG=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S1D135XX=y +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=y +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_AT91=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91RM9200=y + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=1 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_SLUB_DEBUG_ON=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_DEBUG_KOBJECT=y +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 00d44c6fbfe9..ad455ff5aebe 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -7,7 +7,7 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) # Object file lists. obj-y := compat.o entry-armv.o entry-common.o irq.o \ - process.o ptrace.o semaphore.o setup.o signal.o \ + process.o ptrace.o setup.o signal.o \ sys_arm.o stacktrace.o time.o traps.o obj-$(CONFIG_ISA_DMA_API) += dma.o @@ -22,6 +22,7 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o +obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index f73d62e8ab60..688b7b1ee416 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -179,3 +179,5 @@ EXPORT_SYMBOL(_find_next_zero_bit_be); EXPORT_SYMBOL(_find_first_bit_be); EXPORT_SYMBOL(_find_next_bit_be); #endif + +EXPORT_SYMBOL(copy_page); diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c index 0ee2e9819631..321c5291d05f 100644 --- a/arch/arm/kernel/arthur.c +++ b/arch/arm/kernel/arthur.c @@ -90,3 +90,5 @@ static void __exit arthur_exit(void) module_init(arthur_init); module_exit(arthur_exit); + +MODULE_LICENSE("GPL"); diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 3278e713c32a..4a881258bb17 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -16,6 +16,7 @@ #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/procinfo.h> +#include <linux/kbuild.h> /* * Make sure that the compiler and target are compatible. @@ -35,13 +36,6 @@ #error Known good compilers: 3.3 #endif -/* Use marker if you need to separate the values later */ - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - int main(void) { DEFINE(TSK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); @@ -58,6 +52,9 @@ int main(void) DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); +#ifdef CONFIG_ARM_THUMBEE + DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state)); +#endif #ifdef CONFIG_IWMMXT DEFINE(TI_IWMMXT_STATE, offsetof(struct thread_info, fpstate.iwmmxt)); #endif @@ -108,5 +105,12 @@ int main(void) DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush)); DEFINE(PROCINFO_MM_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mm_mmu_flags)); DEFINE(PROCINFO_IO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_io_mmu_flags)); + BLANK(); +#ifdef MULTI_DABORT + DEFINE(PROCESSOR_DABT_FUNC, offsetof(struct processor, _data_abort)); +#endif +#ifdef MULTI_PABORT + DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort)); +#endif return 0; } diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c index e2e934c38080..64c420805e6f 100644 --- a/arch/arm/kernel/atags.c +++ b/arch/arm/kernel/atags.c @@ -35,7 +35,7 @@ create_proc_entries(void) { struct proc_dir_entry* tags_entry; - tags_entry = create_proc_read_entry("atags", 0400, &proc_root, read_buffer, &tags_buffer); + tags_entry = create_proc_read_entry("atags", 0400, NULL, read_buffer, &tags_buffer); if (!tags_entry) return -ENOMEM; diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 7e97b7376563..30a67a5a40a8 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -359,9 +359,11 @@ CALL(sys_kexec_load) CALL(sys_utimensat) CALL(sys_signalfd) -/* 350 */ CALL(sys_ni_syscall) +/* 350 */ CALL(sys_timerfd_create) CALL(sys_eventfd) CALL(sys_fallocate) + CALL(sys_timerfd_settime) + CALL(sys_timerfd_gettime) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index f56d48c451ea..a53c0aba5c14 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -37,6 +37,7 @@ #include <linux/mm.h> #include <linux/slab.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/device.h> #include <linux/init.h> #include <linux/mutex.h> @@ -723,17 +724,14 @@ unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) return address; } -static int ecard_prints(char *buffer, ecard_t *ec) +static int ecard_prints(struct seq_file *m, ecard_t *ec) { - char *start = buffer; - - buffer += sprintf(buffer, " %d: %s ", ec->slot_no, - ec->easi ? "EASI" : " "); + seq_printf(m, " %d: %s ", ec->slot_no, ec->easi ? "EASI" : " "); if (ec->cid.id == 0) { struct in_chunk_dir incd; - buffer += sprintf(buffer, "[%04X:%04X] ", + seq_printf(m, "[%04X:%04X] ", ec->cid.manufacturer, ec->cid.product); if (!ec->card_desc && ec->cid.cd && @@ -744,43 +742,43 @@ static int ecard_prints(char *buffer, ecard_t *ec) strcpy((char *)ec->card_desc, incd.d.string); } - buffer += sprintf(buffer, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*"); + seq_printf(m, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*"); } else - buffer += sprintf(buffer, "Simple card %d\n", ec->cid.id); + seq_printf(m, "Simple card %d\n", ec->cid.id); - return buffer - start; + return 0; } -static int get_ecard_dev_info(char *buf, char **start, off_t pos, int count) +static int ecard_devices_proc_show(struct seq_file *m, void *v) { ecard_t *ec = cards; - off_t at = 0; - int len, cnt; - - cnt = 0; - while (ec && count > cnt) { - len = ecard_prints(buf, ec); - at += len; - if (at >= pos) { - if (!*start) { - *start = buf + (pos - (at - len)); - cnt = at - pos; - } else - cnt += len; - buf += len; - } + + while (ec) { + ecard_prints(m, ec); ec = ec->next; } - return (count > cnt) ? cnt : count; + return 0; } +static int ecard_devices_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ecard_devices_proc_show, NULL); +} + +static const struct file_operations bus_ecard_proc_fops = { + .owner = THIS_MODULE, + .open = ecard_devices_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static struct proc_dir_entry *proc_bus_ecard_dir = NULL; static void ecard_proc_init(void) { - proc_bus_ecard_dir = proc_mkdir("ecard", proc_bus); - create_proc_info_entry("devices", 0, proc_bus_ecard_dir, - get_ecard_dev_info); + proc_bus_ecard_dir = proc_mkdir("bus/ecard", NULL); + proc_create("devices", 0, proc_bus_ecard_dir, &bus_ecard_proc_fops); } #define ec_set_resource(ec,nr,st,sz) \ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a46d5b456765..7dca225752c1 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -166,12 +166,12 @@ __dabt_svc: @ The abort handler must return the aborted address in r0, and @ the fault status register in r1. r9 must be preserved. @ -#ifdef MULTI_ABORT +#ifdef MULTI_DABORT ldr r4, .LCprocfns mov lr, pc - ldr pc, [r4] + ldr pc, [r4, #PROCESSOR_DABT_FUNC] #else - bl CPU_ABORT_HANDLER + bl CPU_DABORT_HANDLER #endif @ @@ -209,14 +209,12 @@ __irq_svc: irq_handler #ifdef CONFIG_PREEMPT + str r8, [tsk, #TI_PREEMPT] @ restore preempt count ldr r0, [tsk, #TI_FLAGS] @ get flags + teq r8, #0 @ if preempt count != 0 + movne r0, #0 @ force flags to 0 tst r0, #_TIF_NEED_RESCHED blne svc_preempt -preempt_return: - ldr r0, [tsk, #TI_PREEMPT] @ read preempt value - str r8, [tsk, #TI_PREEMPT] @ restore preempt count - teq r0, r7 - strne r0, [r0, -r0] @ bug() #endif ldr r0, [sp, #S_PSR] @ irqs are already disabled msr spsr_cxsf, r0 @@ -230,19 +228,11 @@ preempt_return: #ifdef CONFIG_PREEMPT svc_preempt: - teq r8, #0 @ was preempt count = 0 - ldreq r6, .LCirq_stat - movne pc, lr @ no - ldr r0, [r6, #4] @ local_irq_count - ldr r1, [r6, #8] @ local_bh_count - adds r0, r0, r1 - movne pc, lr - mov r7, #0 @ preempt_schedule_irq - str r7, [tsk, #TI_PREEMPT] @ expects preempt_count == 0 + mov r8, lr 1: bl preempt_schedule_irq @ irq en/disable is done inside ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS tst r0, #_TIF_NEED_RESCHED - beq preempt_return @ go again + moveq pc, r8 @ go again b 1b #endif @@ -293,7 +283,6 @@ __pabt_svc: mrs r9, cpsr tst r3, #PSR_I_BIT biceq r9, r9, #PSR_I_BIT - msr cpsr_c, r9 @ @ set args, then call main handler @@ -301,7 +290,15 @@ __pabt_svc: @ r0 - address of faulting instruction @ r1 - pointer to registers on stack @ - mov r0, r2 @ address (pc) +#ifdef MULTI_PABORT + mov r0, r2 @ pass address of aborted instruction. + ldr r4, .LCprocfns + mov lr, pc + ldr pc, [r4, #PROCESSOR_PABT_FUNC] +#else + CPU_PABORT_HANDLER(r0, r2) +#endif + msr cpsr_c, r9 @ Maybe enable interrupts mov r1, sp @ regs bl do_PrefetchAbort @ call abort handler @@ -320,16 +317,12 @@ __pabt_svc: .align 5 .LCcralign: .word cr_alignment -#ifdef MULTI_ABORT +#ifdef MULTI_DABORT .LCprocfns: .word processor #endif .LCfp: .word fp_enter -#ifdef CONFIG_PREEMPT -.LCirq_stat: - .word irq_stat -#endif /* * User mode handlers @@ -404,12 +397,12 @@ __dabt_usr: @ The abort handler must return the aborted address in r0, and @ the fault status register in r1. @ -#ifdef MULTI_ABORT +#ifdef MULTI_DABORT ldr r4, .LCprocfns mov lr, pc - ldr pc, [r4] + ldr pc, [r4, #PROCESSOR_DABT_FUNC] #else - bl CPU_ABORT_HANDLER + bl CPU_DABORT_HANDLER #endif @ @@ -455,10 +448,6 @@ __irq_usr: __und_usr: usr_entry - tst r3, #PSR_T_BIT @ Thumb mode? - bne __und_usr_unknown @ ignore FP - sub r4, r2, #4 - @ @ fall through to the emulation code, which returns using r9 if @ it has emulated the instruction, or the more conventional lr @@ -468,7 +457,24 @@ __und_usr: @ adr r9, ret_from_exception adr lr, __und_usr_unknown -1: ldrt r0, [r4] + tst r3, #PSR_T_BIT @ Thumb mode? + subeq r4, r2, #4 @ ARM instr at LR - 4 + subne r4, r2, #2 @ Thumb instr at LR - 2 +1: ldreqt r0, [r4] + beq call_fpe + @ Thumb instruction +#if __LINUX_ARM_ARCH__ >= 7 +2: ldrht r5, [r4], #2 + and r0, r5, #0xf800 @ mask bits 111x x... .... .... + cmp r0, #0xe800 @ 32bit instruction if xx != 0 + blo __und_usr_unknown +3: ldrht r0, [r4] + add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 + orr r0, r0, r5, lsl #16 +#else + b __und_usr_unknown +#endif + @ @ fallthrough to call_fpe @ @@ -477,10 +483,14 @@ __und_usr: * The out of line fixup for the ldrt above. */ .section .fixup, "ax" -2: mov pc, r9 +4: mov pc, r9 .previous .section __ex_table,"a" - .long 1b, 2b + .long 1b, 4b +#if __LINUX_ARM_ARCH__ >= 7 + .long 2b, 4b + .long 3b, 4b +#endif .previous /* @@ -507,9 +517,16 @@ __und_usr: * r10 = this threads thread_info structure. * lr = unrecognised instruction return address */ + @ + @ Fall-through from Thumb-2 __und_usr + @ +#ifdef CONFIG_NEON + adr r6, .LCneon_thumb_opcodes + b 2f +#endif call_fpe: #ifdef CONFIG_NEON - adr r6, .LCneon_opcodes + adr r6, .LCneon_arm_opcodes 2: ldr r7, [r6], #4 @ mask value cmp r7, #0 @ end mask? @@ -526,6 +543,7 @@ call_fpe: 1: #endif tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 + tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 #if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710) and r8, r0, #0x0f000000 @ mask out op-code bits teqne r8, #0x0f000000 @ SWI (ARM6/7 bug)? @@ -577,7 +595,7 @@ call_fpe: #ifdef CONFIG_NEON .align 6 -.LCneon_opcodes: +.LCneon_arm_opcodes: .word 0xfe000000 @ mask .word 0xf2000000 @ opcode @@ -586,6 +604,16 @@ call_fpe: .word 0x00000000 @ mask .word 0x00000000 @ opcode + +.LCneon_thumb_opcodes: + .word 0xef000000 @ mask + .word 0xef000000 @ opcode + + .word 0xff100000 @ mask + .word 0xf9000000 @ opcode + + .word 0x00000000 @ mask + .word 0x00000000 @ opcode #endif do_fpe: @@ -619,8 +647,15 @@ __und_usr_unknown: __pabt_usr: usr_entry +#ifdef MULTI_PABORT + mov r0, r2 @ pass address of aborted instruction. + ldr r4, .LCprocfns + mov lr, pc + ldr pc, [r4, #PROCESSOR_PABT_FUNC] +#else + CPU_PABORT_HANDLER(r0, r2) +#endif enable_irq @ Enable interrupts - mov r0, r2 @ address (pc) mov r1, sp @ regs bl do_PrefetchAbort @ call abort handler /* fall through */ diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 6c90c50a9ee3..597ed00a08d8 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -352,6 +352,11 @@ sys_mmap2: b do_mmap2 #endif +ENTRY(pabort_ifar) + mrc p15, 0, r0, cr6, cr0, 2 +ENTRY(pabort_noifar) + mov pc, lr + #ifdef CONFIG_OABI_COMPAT /* diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 50f667febe29..7e9c00a8a412 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -75,8 +75,13 @@ __error_p: #ifdef CONFIG_DEBUG_LL adr r0, str_p1 bl printascii + mov r0, r9 + bl printhex8 + adr r0, str_p2 + bl printascii b __error -str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n" +str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x" +str_p2: .asciz ").\n" .align #endif diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c index bd4ef53bc6b9..8b8c9d38a761 100644 --- a/arch/arm/kernel/init_task.c +++ b/arch/arm/kernel/init_task.c @@ -13,7 +13,6 @@ #include <asm/pgtable.h> static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct mm_struct init_mm = INIT_MM(init_mm); diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index d51bc8b60557..b4565bb133c1 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -1176,7 +1176,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) * *S (bit 20) updates condition codes * ADC/SBC/RSC reads the C flag */ - insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */ + insn &= 0xfff00fff; /* Rn = r0, Rd = r0 */ asi->insn[0] = insn; asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_imm_rwflags : emulate_alu_imm_rflags; diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 13e371aad879..5593dd207216 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -66,7 +66,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) return -ENOMEM; for (is = 0; is < MAX_INSN_SIZE; ++is) p->ainsn.insn[is] = tmp_insn[is]; - flush_insns(&p->ainsn.insn, MAX_INSN_SIZE); + flush_insns(p->ainsn.insn, MAX_INSN_SIZE); break; case INSN_GOOD_NO_SLOT: /* instruction doesn't need insn slot */ diff --git a/arch/arm/kernel/semaphore.c b/arch/arm/kernel/semaphore.c deleted file mode 100644 index 981fe5c6ccbe..000000000000 --- a/arch/arm/kernel/semaphore.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * ARM semaphore implementation, taken from - * - * i386 semaphore implementation. - * - * (C) Copyright 1999 Linus Torvalds - * - * Modified for ARM by Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/init.h> - -#include <asm/semaphore.h> - -/* - * Semaphores are implemented using a two-way counter: - * The "count" variable is decremented for each process - * that tries to acquire the semaphore, while the "sleeping" - * variable is a count of such acquires. - * - * Notably, the inline "up()" and "down()" functions can - * efficiently test if they need to do any extra work (up - * needs to do something only if count was negative before - * the increment operation. - * - * "sleeping" and the contention routine ordering is - * protected by the semaphore spinlock. - * - * Note that these functions are only called when there is - * contention on the lock, and as such all this is the - * "non-critical" part of the whole semaphore business. The - * critical part is the inline stuff in <asm/semaphore.h> - * where we want to avoid any extra jumps and calls. - */ - -/* - * Logic: - * - only on a boundary condition do we need to care. When we go - * from a negative count to a non-negative, we wake people up. - * - when we go from a non-negative count to a negative do we - * (a) synchronize with the "sleeper" count and (b) make sure - * that we're on the wakeup list before we synchronize so that - * we cannot lose wakeup events. - */ - -void __up(struct semaphore *sem) -{ - wake_up(&sem->wait); -} - -static DEFINE_SPINLOCK(semaphore_lock); - -void __sched __down(struct semaphore * sem) -{ - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - tsk->state = TASK_UNINTERRUPTIBLE; - add_wait_queue_exclusive(&sem->wait, &wait); - - spin_lock_irq(&semaphore_lock); - sem->sleepers++; - for (;;) { - int sleepers = sem->sleepers; - - /* - * Add "everybody else" into it. They aren't - * playing, because we own the spinlock. - */ - if (!atomic_add_negative(sleepers - 1, &sem->count)) { - sem->sleepers = 0; - break; - } - sem->sleepers = 1; /* us - see -1 above */ - spin_unlock_irq(&semaphore_lock); - - schedule(); - tsk->state = TASK_UNINTERRUPTIBLE; - spin_lock_irq(&semaphore_lock); - } - spin_unlock_irq(&semaphore_lock); - remove_wait_queue(&sem->wait, &wait); - tsk->state = TASK_RUNNING; - wake_up(&sem->wait); -} - -int __sched __down_interruptible(struct semaphore * sem) -{ - int retval = 0; - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - tsk->state = TASK_INTERRUPTIBLE; - add_wait_queue_exclusive(&sem->wait, &wait); - - spin_lock_irq(&semaphore_lock); - sem->sleepers ++; - for (;;) { - int sleepers = sem->sleepers; - - /* - * With signals pending, this turns into - * the trylock failure case - we won't be - * sleeping, and we* can't get the lock as - * it has contention. Just correct the count - * and exit. - */ - if (signal_pending(current)) { - retval = -EINTR; - sem->sleepers = 0; - atomic_add(sleepers, &sem->count); - break; - } - - /* - * Add "everybody else" into it. They aren't - * playing, because we own the spinlock. The - * "-1" is because we're still hoping to get - * the lock. - */ - if (!atomic_add_negative(sleepers - 1, &sem->count)) { - sem->sleepers = 0; - break; - } - sem->sleepers = 1; /* us - see -1 above */ - spin_unlock_irq(&semaphore_lock); - - schedule(); - tsk->state = TASK_INTERRUPTIBLE; - spin_lock_irq(&semaphore_lock); - } - spin_unlock_irq(&semaphore_lock); - tsk->state = TASK_RUNNING; - remove_wait_queue(&sem->wait, &wait); - wake_up(&sem->wait); - return retval; -} - -/* - * Trylock failed - make sure we correct for - * having decremented the count. - * - * We could have done the trylock with a - * single "cmpxchg" without failure cases, - * but then it wouldn't work on a 386. - */ -int __down_trylock(struct semaphore * sem) -{ - int sleepers; - unsigned long flags; - - spin_lock_irqsave(&semaphore_lock, flags); - sleepers = sem->sleepers + 1; - sem->sleepers = 0; - - /* - * Add "everybody else" and us into it. They aren't - * playing, because we own the spinlock. - */ - if (!atomic_add_negative(sleepers, &sem->count)) - wake_up(&sem->wait); - - spin_unlock_irqrestore(&semaphore_lock, flags); - return 1; -} - -/* - * The semaphore operations have a special calling sequence that - * allow us to do a simpler in-line version of them. These routines - * need to convert that sequence back into the C sequence when - * there is contention on the semaphore. - * - * ip contains the semaphore pointer on entry. Save the C-clobbered - * registers (r0 to r3 and lr), but not ip, as we use it as a return - * value in some cases.. - * To remain AAPCS compliant (64-bit stack align) we save r4 as well. - */ -asm(" .section .sched.text,\"ax\",%progbits \n\ - .align 5 \n\ - .globl __down_failed \n\ -__down_failed: \n\ - stmfd sp!, {r0 - r4, lr} \n\ - mov r0, ip \n\ - bl __down \n\ - ldmfd sp!, {r0 - r4, pc} \n\ - \n\ - .align 5 \n\ - .globl __down_interruptible_failed \n\ -__down_interruptible_failed: \n\ - stmfd sp!, {r0 - r4, lr} \n\ - mov r0, ip \n\ - bl __down_interruptible \n\ - mov ip, r0 \n\ - ldmfd sp!, {r0 - r4, pc} \n\ - \n\ - .align 5 \n\ - .globl __down_trylock_failed \n\ -__down_trylock_failed: \n\ - stmfd sp!, {r0 - r4, lr} \n\ - mov r0, ip \n\ - bl __down_trylock \n\ - mov ip, r0 \n\ - ldmfd sp!, {r0 - r4, pc} \n\ - \n\ - .align 5 \n\ - .globl __up_wakeup \n\ -__up_wakeup: \n\ - stmfd sp!, {r0 - r4, lr} \n\ - mov r0, ip \n\ - bl __up \n\ - ldmfd sp!, {r0 - r4, pc} \n\ - "); - -EXPORT_SYMBOL(__down_failed); -EXPORT_SYMBOL(__down_interruptible_failed); -EXPORT_SYMBOL(__down_trylock_failed); -EXPORT_SYMBOL(__up_wakeup); diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 9bd1870d980e..0128687ba0f7 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -34,23 +34,6 @@ extern unsigned long do_mremap(unsigned long addr, unsigned long old_len, unsigned long new_len, unsigned long flags, unsigned long new_addr); -/* - * sys_pipe() is the normal C calling standard for creating - * a pipe. It's not the way unix traditionally does this, though. - */ -asmlinkage int sys_pipe(unsigned long __user *fildes) -{ - int fd[2]; - int error; - - error = do_pipe(fd); - if (!error) { - if (copy_to_user(fildes, fd, 2*sizeof(int))) - error = -EFAULT; - } - return error; -} - /* common code for old and new mmaps */ inline long do_mmap2( unsigned long addr, unsigned long len, diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c new file mode 100644 index 000000000000..df3f6b7ebcea --- /dev/null +++ b/arch/arm/kernel/thumbee.c @@ -0,0 +1,81 @@ +/* + * arch/arm/kernel/thumbee.c + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/thread_notify.h> + +/* + * Access to the ThumbEE Handler Base register + */ +static inline unsigned long teehbr_read() +{ + unsigned long v; + asm("mrc p14, 6, %0, c1, c0, 0\n" : "=r" (v)); + return v; +} + +static inline void teehbr_write(unsigned long v) +{ + asm("mcr p14, 6, %0, c1, c0, 0\n" : : "r" (v)); +} + +static int thumbee_notifier(struct notifier_block *self, unsigned long cmd, void *t) +{ + struct thread_info *thread = t; + + switch (cmd) { + case THREAD_NOTIFY_FLUSH: + thread->thumbee_state = 0; + break; + case THREAD_NOTIFY_SWITCH: + current_thread_info()->thumbee_state = teehbr_read(); + teehbr_write(thread->thumbee_state); + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block thumbee_notifier_block = { + .notifier_call = thumbee_notifier, +}; + +static int __init thumbee_init(void) +{ + unsigned long pfr0; + unsigned int cpu_arch = cpu_architecture(); + + if (cpu_arch < CPU_ARCH_ARMv7) + return 0; + + /* processor feature register 0 */ + asm("mrc p15, 0, %0, c0, c1, 0\n" : "=r" (pfr0)); + if ((pfr0 & 0x0000f000) != 0x00001000) + return 0; + + printk(KERN_INFO "ThumbEE CPU extension supported.\n"); + elf_hwcap |= HWCAP_THUMBEE; + thread_register_notifier(&thumbee_notifier_block); + + return 0; +} + +late_initcall(thumbee_init); diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c index 74aa7a39bb68..e10ee158d720 100644 --- a/arch/arm/mach-aaec2000/clock.c +++ b/arch/arm/mach-aaec2000/clock.c @@ -18,8 +18,6 @@ #include <linux/clk.h> #include <linux/mutex.h> -#include <asm/semaphore.h> - #include "clock.h" static LIST_HEAD(clocks); diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 074dcd5d9a7e..0fc07b6db749 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -12,18 +12,28 @@ config ARCH_AT91RM9200 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91SAM9261 bool "AT91SAM9261" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91SAM9263 bool "AT91SAM9263" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91SAM9RL bool "AT91SAM9RL" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91CAP9 bool "AT91CAP9" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91X40 bool "AT91x40" @@ -109,6 +119,13 @@ config MACH_KAFA help Select this if you are using Sperry-Sun's KAFA board. +config MACH_ECBAT91 + bool "emQbit ECB_AT91 SBC" + depends on ARCH_AT91RM9200 + help + Select this if you are using emQbit's ECB_AT91 board. + <http://wiki.emqbit.com/free-ecb-at91> + endif # ---------------------------------------------------------- @@ -133,6 +150,20 @@ config MACH_AT91SAM9260EK Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> +config MACH_CAM60 + bool "KwikByte KB9260 (CAM60) board" + depends on ARCH_AT91SAM9260 + help + Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. + <http://www.kwikbyte.com/KB9260.html> + +config MACH_SAM9_L9260 + bool "Olimex SAM9-L9260 board" + depends on ARCH_AT91SAM9260 + help + Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. + <http://www.olimex.com/dev/sam9-L9260.html> + endif # ---------------------------------------------------------- @@ -216,7 +247,7 @@ comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" - depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) + depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91) help Enable support for the DataFlash card. diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index bf5f293dccf8..8d9bc0153b18 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -29,9 +29,12 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o +obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o +obj-$(CONFIG_MACH_CAM60) += board-cam60.o +obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 48d27d8000b0..933fa8f55cbc 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -13,12 +13,14 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/arch/at91cap9.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -288,6 +290,12 @@ static void at91cap9_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91cap9_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + + /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ @@ -298,6 +306,7 @@ void __init at91cap9_initialize(unsigned long main_clock) iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); at91_arch_reset = at91cap9_reset; + pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); /* Init clock subsystem */ diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index c50fad9cd143..be526746e01e 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -16,15 +16,15 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> +#include <linux/i2c-gpio.h> #include <video/atmel_lcdc.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include <asm/arch/at91cap9.h> -#include <asm/arch/at91sam926x_mc.h> #include <asm/arch/at91cap9_matrix.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -246,7 +246,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk"); + at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -283,10 +283,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; @@ -344,6 +349,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) void __init at91_add_device_nand(struct at91_nand_data *data) {} #endif + /* -------------------------------------------------------------------- * TWI (i2c) * -------------------------------------------------------------------- */ @@ -532,13 +538,59 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) /* -------------------------------------------------------------------- + * Timer/Counter block + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb_resources[] = { + [0] = { + .start = AT91CAP9_BASE_TCB0, + .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_TCB, + .end = AT91CAP9_ID_TCB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_tcb_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb_resources, + .num_resources = ARRAY_SIZE(tcb_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has one clock and irq for all three TC channels */ + at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk"); + platform_device_register(&at91cap9_tcb_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + static struct platform_device at91cap9_rtt_device = { .name = "at91_rtt", - .id = -1, - .num_resources = 0, + .id = 0, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), }; static void __init at91_add_device_rtt(void) @@ -990,7 +1042,7 @@ static inline void configure_usart2_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) @@ -1031,8 +1083,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1043,6 +1093,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} @@ -1060,6 +1113,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index ef6aeb86e980..de19bee83f75 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -577,6 +577,90 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) /* -------------------------------------------------------------------- + * Timer/Counter blocks + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb0_resources[] = { + [0] = { + .start = AT91RM9200_BASE_TCB0, + .end = AT91RM9200_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_TC0, + .end = AT91RM9200_ID_TC0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91RM9200_ID_TC1, + .end = AT91RM9200_ID_TC1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91RM9200_ID_TC2, + .end = AT91RM9200_ID_TC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_tcb0_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb0_resources, + .num_resources = ARRAY_SIZE(tcb0_resources), +}; + +static struct resource tcb1_resources[] = { + [0] = { + .start = AT91RM9200_BASE_TCB1, + .end = AT91RM9200_BASE_TCB1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_TC3, + .end = AT91RM9200_ID_TC3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91RM9200_ID_TC4, + .end = AT91RM9200_ID_TC4, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91RM9200_ID_TC5, + .end = AT91RM9200_ID_TC5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_tcb1_device = { + .name = "atmel_tcb", + .id = 1, + .resource = tcb1_resources, + .num_resources = ARRAY_SIZE(tcb1_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has a separate clock and irq for each TC channel */ + at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk"); + at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk"); + at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk"); + platform_device_register(&at91rm9200_tcb0_device); + + at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk"); + at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk"); + at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk"); + platform_device_register(&at91rm9200_tcb1_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ @@ -1019,7 +1103,7 @@ static inline void configure_usart3_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) @@ -1110,8 +1194,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1122,6 +1204,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} @@ -1141,6 +1226,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtc(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 18d06612ce8a..ee26550cdc21 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -18,6 +19,7 @@ #include <asm/arch/at91sam9260.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -267,6 +269,11 @@ static void at91sam9260_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91sam9260_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + /* -------------------------------------------------------------------- * AT91SAM9260 processor initialization @@ -304,6 +311,7 @@ void __init at91sam9260_initialize(unsigned long main_clock) iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); at91_arch_reset = at91sam9260_reset; + pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 105f8403860b..393a32aefce5 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -19,8 +19,8 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include <asm/arch/at91sam9260.h> -#include <asm/arch/at91sam926x_mc.h> #include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -288,10 +288,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; @@ -540,6 +545,90 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) /* -------------------------------------------------------------------- + * Timer/Counter blocks + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb0_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_TCB0, + .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_TC0, + .end = AT91SAM9260_ID_TC0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91SAM9260_ID_TC1, + .end = AT91SAM9260_ID_TC1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91SAM9260_ID_TC2, + .end = AT91SAM9260_ID_TC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_tcb0_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb0_resources, + .num_resources = ARRAY_SIZE(tcb0_resources), +}; + +static struct resource tcb1_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_TCB1, + .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_TC3, + .end = AT91SAM9260_ID_TC3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91SAM9260_ID_TC4, + .end = AT91SAM9260_ID_TC4, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91SAM9260_ID_TC5, + .end = AT91SAM9260_ID_TC5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_tcb1_device = { + .name = "atmel_tcb", + .id = 1, + .resource = tcb1_resources, + .num_resources = ARRAY_SIZE(tcb1_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has a separate clock and irq for each TC channel */ + at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk"); + at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk"); + at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk"); + platform_device_register(&at91sam9260_tcb0_device); + + at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk"); + at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk"); + at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk"); + platform_device_register(&at91sam9260_tcb1_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ @@ -553,7 +642,7 @@ static struct resource rtt_resources[] = { static struct platform_device at91sam9260_rtt_device = { .name = "at91_rtt", - .id = -1, + .id = 0, .resource = rtt_resources, .num_resources = ARRAY_SIZE(rtt_resources), }; @@ -962,64 +1051,9 @@ static inline void configure_usart5_pins(void) at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91sam9260_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9260_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91sam9260_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91sam9260_uart3_device; - at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart"); - break; - case 4: - configure_usart4_pins(); - at91_uarts[i] = &at91sam9260_uart4_device; - at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart"); - break; - case 5: - configure_usart5_pins(); - at91_uarts[i] = &at91sam9260_uart5_device; - at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart"); - break; - case 6: - configure_dbgu_pins(); - at91_uarts[i] = &at91sam9260_dbgu_device; - at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; @@ -1073,8 +1107,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1085,9 +1117,11 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} @@ -1103,6 +1137,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 90b87e1877d9..35bf6fd52516 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -11,12 +11,14 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/arch/at91sam9261.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -245,6 +247,11 @@ static void at91sam9261_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91sam9261_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + /* -------------------------------------------------------------------- * AT91SAM9261 processor initialization @@ -256,6 +263,7 @@ void __init at91sam9261_initialize(unsigned long main_clock) iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); at91_arch_reset = at91sam9261_reset; + pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 245641263fce..0babb645b83c 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -24,7 +24,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/at91sam9261.h> #include <asm/arch/at91sam9261_matrix.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -539,6 +539,17 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ #endif + if (ARRAY_SIZE(lcdc_resources) > 2) { + void __iomem *fb; + struct resource *fb_res = &lcdc_resources[2]; + size_t fb_len = fb_res->end - fb_res->start + 1; + + fb = ioremap(fb_res->start, fb_len); + if (fb) { + memset(fb, 0, fb_len); + iounmap(fb); + } + } lcdc_data = *data; platform_device_register(&at91_lcdc_device); } @@ -548,6 +559,55 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- + * Timer/Counter block + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_TCB0, + .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_TC0, + .end = AT91SAM9261_ID_TC0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91SAM9261_ID_TC1, + .end = AT91SAM9261_ID_TC1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91SAM9261_ID_TC2, + .end = AT91SAM9261_ID_TC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_tcb_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb_resources, + .num_resources = ARRAY_SIZE(tcb_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has a separate clock and irq for each TC channel */ + at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk"); + at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk"); + at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk"); + platform_device_register(&at91sam9261_tcb_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ @@ -561,7 +621,7 @@ static struct resource rtt_resources[] = { static struct platform_device at91sam9261_rtt_device = { .name = "at91_rtt", - .id = -1, + .id = 0, .resource = rtt_resources, .num_resources = ARRAY_SIZE(rtt_resources), }; @@ -938,49 +998,9 @@ static inline void configure_usart2_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9261_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(0); - at91_uarts[i] = &at91sam9261_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91sam9261_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart"); - break; - case 3: - configure_dbgu_pins(); - at91_uarts[i] = &at91sam9261_dbgu_device; - at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; @@ -1019,8 +1039,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1031,9 +1049,11 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} @@ -1050,6 +1070,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index a53ba0f74351..052074a9f2d3 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -11,12 +11,14 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/arch/at91sam9263.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -271,6 +273,11 @@ static void at91sam9263_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91sam9263_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + /* -------------------------------------------------------------------- * AT91SAM9263 processor initialization @@ -282,6 +289,7 @@ void __init at91sam9263_initialize(unsigned long main_clock) iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); at91_arch_reset = at91sam9263_reset; + pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); /* Init clock subsystem */ diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 0b12e1adcc8e..719667e25c98 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -22,8 +22,8 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include <asm/arch/at91sam9263.h> -#include <asm/arch/at91sam926x_mc.h> #include <asm/arch/at91sam9263_matrix.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -308,7 +308,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk"); + at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -358,10 +358,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC0, + .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; @@ -783,6 +788,43 @@ void __init at91_add_device_isi(void) {} /* -------------------------------------------------------------------- + * Timer/Counter block + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_TCB0, + .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_TCB, + .end = AT91SAM9263_ID_TCB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_tcb_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb_resources, + .num_resources = ARRAY_SIZE(tcb_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has one clock and irq for all three TC channels */ + at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk"); + platform_device_register(&at91sam9263_tcb_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ @@ -933,9 +975,6 @@ static inline void configure_ssc1_pins(unsigned pins) } /* - * Return the device node so that board init code can use it as the - * parent for the device node reflecting how it's used on this board. - * * SSC controllers are accessed through library code, instead of any * kind of all-singing/all-dancing driver. For example one could be * used by a particular I2S audio codec's driver, while another one @@ -1146,49 +1185,9 @@ static inline void configure_usart2_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9263_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9263_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9263_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart"); - break; - case 3: - configure_dbgu_pins(); - at91_uarts[i] = &at91sam9263_dbgu_device; - at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; @@ -1227,8 +1226,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1239,9 +1236,11 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} @@ -1257,6 +1256,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index e38d23770992..5cecbd7de6a6 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -1,23 +1,20 @@ /* - * linux/arch/arm/mach-at91/at91sam926x_time.c + * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x * * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France + * Converted to ClockSource/ClockEvents by David Brownell. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/time.h> +#include <linux/clk.h> +#include <linux/clockchips.h> -#include <asm/hardware.h> -#include <asm/io.h> #include <asm/mach/time.h> #include <asm/arch/at91_pit.h> @@ -26,85 +23,167 @@ #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) #define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) +static u32 pit_cycle; /* write-once */ +static u32 pit_cnt; /* access only w/system irq blocked */ + + /* - * Returns number of microseconds since last timer interrupt. Note that interrupts - * will have been disabled by do_gettimeofday() - * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. + * Clocksource: just a monotonic counter of MCK/16 cycles. + * We don't care whether or not PIT irqs are enabled. */ -static unsigned long at91sam926x_gettimeoffset(void) +static cycle_t read_pit_clk(void) { - unsigned long elapsed; - unsigned long t = at91_sys_read(AT91_PIT_PIIR); + unsigned long flags; + u32 elapsed; + u32 t; + + raw_local_irq_save(flags); + elapsed = pit_cnt; + t = at91_sys_read(AT91_PIT_PIIR); + raw_local_irq_restore(flags); + + elapsed += PIT_PICNT(t) * pit_cycle; + elapsed += PIT_CPIV(t); + return elapsed; +} + +static struct clocksource pit_clk = { + .name = "pit", + .rating = 175, + .read = read_pit_clk, + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; - elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */ - return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH; +/* + * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16) + */ +static void +pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + unsigned long flags; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* update clocksource counter, then enable the IRQ */ + raw_local_irq_save(flags); + pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); + at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN + | AT91_PIT_PITIEN); + raw_local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_ONESHOT: + BUG(); + /* FALLTHROUGH */ + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + /* disable irq, leaving the clocksource active */ + at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } } +static struct clock_event_device pit_clkevt = { + .name = "pit", + .features = CLOCK_EVT_FEAT_PERIODIC, + .shift = 32, + .rating = 100, + .cpumask = CPU_MASK_CPU0, + .set_mode = pit_clkevt_mode, +}; + + /* * IRQ handler for the timer. */ -static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id) +static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) { - volatile long nr_ticks; - if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */ - /* Get number to ticks performed before interrupt and clear PIT interrupt */ + /* The PIT interrupt may be disabled, and is shared */ + if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC) + && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) { + unsigned nr_ticks; + + /* Get number of ticks performed before irq, and ack it */ nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); do { - timer_tick(); + pit_cnt += pit_cycle; + pit_clkevt.event_handler(&pit_clkevt); nr_ticks--; } while (nr_ticks); return IRQ_HANDLED; - } else - return IRQ_NONE; /* not handled */ + } + + return IRQ_NONE; } -static struct irqaction at91sam926x_timer_irq = { +static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91sam926x_timer_interrupt + .handler = at91sam926x_pit_interrupt }; -void at91sam926x_timer_reset(void) +static void at91sam926x_pit_reset(void) { - /* Disable timer */ + /* Disable timer and irqs */ at91_sys_write(AT91_PIT_MR, 0); - /* Clear any pending interrupts */ - (void) at91_sys_read(AT91_PIT_PIVR); + /* Clear any pending interrupts, wait for PIT to stop counting */ + while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0) + cpu_relax(); - /* Set Period Interval timer and enable its interrupt */ - at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN); + /* Start PIT but don't enable IRQ */ + at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); } /* - * Set up timer interrupt. + * Set up both clocksource and clockevent support. */ -void __init at91sam926x_timer_init(void) +static void __init at91sam926x_pit_init(void) { - /* Initialize and enable the timer */ - at91sam926x_timer_reset(); + unsigned long pit_rate; + unsigned bits; + + /* + * Use our actual MCK to figure out how many MCK/16 ticks per + * 1/HZ period (instead of a compile-time constant LATCH). + */ + pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16; + pit_cycle = (pit_rate + HZ/2) / HZ; + WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0); - /* Make IRQs happen for the system timer. */ - setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq); + /* Initialize and enable the timer */ + at91sam926x_pit_reset(); + + /* + * Register clocksource. The high order bits of PIV are unused, + * so this isn't a 32-bit counter unless we get clockevent irqs. + */ + pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift); + bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */; + pit_clk.mask = CLOCKSOURCE_MASK(bits); + clocksource_register(&pit_clk); + + /* Set up irq handler */ + setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq); + + /* Set up and register clockevents */ + pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift); + clockevents_register_device(&pit_clkevt); } -#ifdef CONFIG_PM -static void at91sam926x_timer_suspend(void) +static void at91sam926x_pit_suspend(void) { /* Disable timer */ at91_sys_write(AT91_PIT_MR, 0); } -#else -#define at91sam926x_timer_suspend NULL -#endif struct sys_timer at91sam926x_timer = { - .init = at91sam926x_timer_init, - .offset = at91sam926x_gettimeoffset, - .suspend = at91sam926x_timer_suspend, - .resume = at91sam926x_timer_reset, + .init = at91sam926x_pit_init, + .suspend = at91sam926x_pit_suspend, + .resume = at91sam926x_pit_reset, }; - diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 4813a35f6cf5..902c79893ec7 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -10,6 +10,7 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -17,6 +18,7 @@ #include <asm/arch/at91sam9rl.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -244,6 +246,11 @@ static void at91sam9rl_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91sam9rl_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + /* -------------------------------------------------------------------- * AT91SAM9RL processor initialization @@ -274,6 +281,7 @@ void __init at91sam9rl_initialize(unsigned long main_clock) iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); at91_arch_reset = at91sam9rl_reset; + pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); /* Init clock subsystem */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f43b5c33e45d..450db304936f 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -20,7 +20,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/at91sam9rl.h> #include <asm/arch/at91sam9rl_matrix.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -105,10 +105,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; @@ -327,13 +332,6 @@ static struct resource lcdc_resources[] = { .end = AT91SAM9RL_ID_LCDC, .flags = IORESOURCE_IRQ, }, -#if defined(CONFIG_FB_INTSRAM) - [2] = { - .start = AT91SAM9RL_SRAM_BASE, - .end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -#endif }; static struct platform_device at91_lcdc_device = { @@ -385,6 +383,55 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- + * Timer/Counter block + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_TCB0, + .end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_ID_TC0, + .end = AT91SAM9RL_ID_TC0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91SAM9RL_ID_TC1, + .end = AT91SAM9RL_ID_TC1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91SAM9RL_ID_TC2, + .end = AT91SAM9RL_ID_TC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9rl_tcb_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb_resources, + .num_resources = ARRAY_SIZE(tcb_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has a separate clock and irq for each TC channel */ + at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk"); + at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk"); + at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk"); + platform_device_register(&at91sam9rl_tcb_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ @@ -418,7 +465,7 @@ static struct resource rtt_resources[] = { static struct platform_device at91sam9rl_rtt_device = { .name = "at91_rtt", - .id = -1, + .id = 0, .resource = rtt_resources, .num_resources = ARRAY_SIZE(rtt_resources), }; @@ -539,9 +586,6 @@ static inline void configure_ssc1_pins(unsigned pins) } /* - * Return the device node so that board init code can use it as the - * parent for the device node reflecting how it's used on this board. - * * SSC controllers are accessed through library code, instead of any * kind of all-singing/all-dancing driver. For example one could be * used by a particular I2S audio codec's driver, while another one @@ -802,54 +846,9 @@ static inline void configure_usart3_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9rl_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(0); - at91_uarts[i] = &at91sam9rl_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91sam9rl_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91sam9rl_uart3_device; - at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart"); - break; - case 4: - configure_dbgu_pins(); - at91_uarts[i] = &at91sam9rl_dbgu_device; - at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; @@ -893,8 +892,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -905,9 +902,11 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} @@ -925,6 +924,7 @@ static int __init at91_add_standard_devices(void) at91_add_device_rtc(); at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 1de121fc55f4..f44647738ee4 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -16,16 +16,32 @@ #include <asm/mach/arch.h> #include <asm/arch/at91x40.h> #include <asm/arch/at91_st.h> +#include <asm/arch/timex.h> #include "generic.h" /* - * This is used in the gpio code, stub locally. + * Export the clock functions for the AT91X40. Some external code common + * to all AT91 family parts relys on this, like the gpio and serial support. */ int clk_enable(struct clk *clk) { return 0; } +void clk_disable(struct clk *clk) +{ +} + +unsigned long clk_get_rate(struct clk *clk) +{ + return AT91X40_MASTER_CLOCK; +} + +struct clk *clk_get(struct device *dev, const char *id) +{ + return NULL; +} + void __init at91x40_initialize(unsigned long main_clock) { at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c new file mode 100644 index 000000000000..b22a1a004055 --- /dev/null +++ b/arch/arm/mach-at91/board-cam60.c @@ -0,0 +1,180 @@ +/* + * KwikByte CAM60 (KB9260) + * + * based on board-sam9260ek.c + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + +#include "generic.h" + + +static void __init cam60_map_io(void) +{ + /* Initialize processor: 10 MHz crystal */ + at91sam9260_initialize(10000000); + + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init cam60_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + + +/* + * USB Host + */ +static struct at91_usbh_data __initdata cam60_usbh_data = { + .ports = 1, +}; + + +/* + * SPI devices. + */ +#if defined(CONFIG_MTD_DATAFLASH) +static struct mtd_partition __initdata cam60_spi_partitions[] = { + { + .name = "BOOT1", + .offset = 0, + .size = 4 * 1056, + }, + { + .name = "BOOT2", + .offset = MTDPART_OFS_NXTBLK, + .size = 256 * 1056, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 2222 * 1056, + }, + { + .name = "file system", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data __initdata cam60_spi_flash_platform_data = { + .name = "spi_flash", + .parts = cam60_spi_partitions, + .nr_parts = ARRAY_SIZE(cam60_spi_partitions) +}; +#endif + +static struct spi_board_info cam60_spi_devices[] = { +#if defined(CONFIG_MTD_DATAFLASH) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + .platform_data = &cam60_spi_flash_platform_data + }, +#endif +}; + + +/* + * MACB Ethernet device + */ +static struct __initdata at91_eth_data cam60_macb_data = { + .phy_irq_pin = AT91_PIN_PB5, + .is_rmii = 0, +}; + + +/* + * NAND Flash + */ +static struct mtd_partition __initdata cam60_nand_partition[] = { + { + .name = "nand_fs", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(cam60_nand_partition); + return cam60_nand_partition; +} + +static struct at91_nand_data __initdata cam60_nand_data = { + .ale = 21, + .cle = 22, + // .det_pin = ... not there + .rdy_pin = AT91_PIN_PA9, + .enable_pin = AT91_PIN_PA7, + .partition_info = nand_partitions, +}; + + +static void __init cam60_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* SPI */ + at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices)); + /* Ethernet */ + at91_add_device_eth(&cam60_macb_data); + /* USB Host */ + /* enable USB power supply circuit */ + at91_set_gpio_output(AT91_PIN_PB18, 1); + at91_add_device_usbh(&cam60_usbh_data); + /* NAND */ + at91_add_device_nand(&cam60_nand_data); +} + +MACHINE_START(CAM60, "KwikByte CAM60") + /* Maintainer: KwikByte */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = cam60_map_io, + .init_irq = cam60_init_irq, + .init_machine = cam60_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 185437131541..e5512d1ff217 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -45,7 +45,7 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include <asm/arch/at91cap9_matrix.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 0e2a11fc5bbd..81f1ebb4e964 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -43,17 +43,6 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata csb337_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init csb337_map_io(void) { /* Initialize processor: 3.6864 MHz crystal */ @@ -62,8 +51,11 @@ static void __init csb337_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); - /* Setup the serial ports and console */ - at91_init_serial(&csb337_uart_config); + /* DBGU on ttyS0 */ + at91_register_uart(0, 0, 0); + + /* make console=ttyS0 the default */ + at91_set_serial_console(0); } static void __init csb337_init_irq(void) @@ -87,8 +79,7 @@ static struct at91_udc_data __initdata csb337_udc_data = { static struct i2c_board_info __initdata csb337_i2c_devices[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0x68), - .type = "ds1307", + I2C_BOARD_INFO("ds1307", 0x68), }, }; diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index c5c721d27f42..419fd19b620b 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -40,27 +40,16 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata csb637_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init csb637_map_io(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + /* DBGU on ttyS0 */ + at91_register_uart(0, 0, 0); - /* Setup the serial ports and console */ - at91_init_serial(&csb637_uart_config); + /* make console=ttyS0 the default */ + at91_set_serial_console(0); } static void __init csb637_init_irq(void) @@ -118,8 +107,19 @@ static struct platform_device csb_flash = { .num_resources = ARRAY_SIZE(csb_flash_resources), }; +static struct gpio_led csb_leds[] = { + { /* "d1", red */ + .name = "d1", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + }, +}; + static void __init csb637_board_init(void) { + /* LED(s) */ + at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); /* Serial */ at91_add_device_serial(); /* Ethernet */ diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index 0a897efeba8e..c1a813c7169b 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -132,8 +132,7 @@ static struct i2c_board_info __initdata dk_i2c_devices[] = { I2C_BOARD_INFO("x9429", 0x28), }, { - I2C_BOARD_INFO("at24c", 0x50), - .type = "24c1024", + I2C_BOARD_INFO("24c1024", 0x50), } }; diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index b7b79bb9d6c4..af1a1d8ecc30 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -93,8 +93,7 @@ static struct at91_mmc_data __initdata eb9200_mmc_data = { static struct i2c_board_info __initdata eb9200_i2c_devices[] = { { - I2C_BOARD_INFO("at24c", 0x50), - .type = "24c512", + I2C_BOARD_INFO("24c512", 0x50), }, }; diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c new file mode 100644 index 000000000000..e77fad443835 --- /dev/null +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -0,0 +1,178 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-ecbat91.c + * Copyright (C) 2007 emQbit.com. + * + * We started from board-dk.c, which is Copyright (C) 2005 SAN People. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + +#include "generic.h" + + +static void __init ecb_at91map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx & Tx only) */ + at91_register_uart(AT91RM9200_ID_US0, 1, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init ecb_at91init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata ecb_at91eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 0, +}; + +static struct at91_usbh_data __initdata ecb_at91usbh_data = { + .ports = 1, +}; + +static struct at91_mmc_data __initdata ecb_at91mmc_data = { + .slot_b = 0, + .wire4 = 1, +}; + + +#if defined(CONFIG_MTD_DATAFLASH) +static struct mtd_partition __initdata my_flash0_partitions[] = +{ + { /* 0x8400 */ + .name = "Darrell-loader", + .offset = 0, + .size = 12* 1056, + }, + { + .name = "U-boot", + .offset = MTDPART_OFS_NXTBLK, + .size = 110 * 1056, + }, + { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */ + .name = "UBoot-env", + .offset = MTDPART_OFS_NXTBLK, + .size = 8 * 1056, + }, + { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */ + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 1534 * 1056, + }, + { /* 190200 - jffs2 root filesystem */ + .name = "Filesystem", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, /* 26 sectors */ + } +}; + +static struct flash_platform_data __initdata my_flash0_platform = { + .name = "Removable flash card", + .parts = my_flash0_partitions, + .nr_parts = ARRAY_SIZE(my_flash0_partitions) +}; + +#endif + +static struct spi_board_info __initdata ecb_at91spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, +#if defined(CONFIG_MTD_DATAFLASH) + .platform_data = &my_flash0_platform, +#endif + }, + { /* User accessable spi - cs1 (250KHz) */ + .modalias = "spi-cs1", + .chip_select = 1, + .max_speed_hz = 250 * 1000, + }, + { /* User accessable spi - cs2 (1MHz) */ + .modalias = "spi-cs2", + .chip_select = 2, + .max_speed_hz = 1 * 1000 * 1000, + }, + { /* User accessable spi - cs3 (10MHz) */ + .modalias = "spi-cs3", + .chip_select = 3, + .max_speed_hz = 10 * 1000 * 1000, + }, +}; + +static void __init ecb_at91board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + + /* Ethernet */ + at91_add_device_eth(&ecb_at91eth_data); + + /* USB Host */ + at91_add_device_usbh(&ecb_at91usbh_data); + + /* I2C */ + at91_add_device_i2c(NULL, 0); + + /* MMC */ + at91_add_device_mmc(0, &ecb_at91mmc_data); + + /* SPI */ + at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices)); +} + +MACHINE_START(ECBAT91, "emQbit's ECB_AT91") + /* Maintainer: emQbit.com */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = ecb_at91map_io, + .init_irq = ecb_at91init_irq, + .init_machine = ecb_at91board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c new file mode 100644 index 000000000000..8f76af5e219a --- /dev/null +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -0,0 +1,199 @@ +/* + * linux/arch/arm/mach-at91/board-sam9-l9260.c + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * Copyright (C) 2007 Olimex Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + +#include "generic.h" + + +static void __init ek_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init ek_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata ek_usbh_data = { + .ports = 2, +}; + +/* + * USB Device port + */ +static struct at91_udc_data __initdata ek_udc_data = { + .vbus_pin = AT91_PIN_PC5, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + + +/* + * SPI devices. + */ +static struct spi_board_info ek_spi_devices[] = { +#if !defined(CONFIG_MMC_AT91) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#endif +#endif +}; + + +/* + * MACB Ethernet device + */ +static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PA7, + .is_rmii = 0, +}; + + +/* + * NAND flash + */ +static struct mtd_partition __initdata ek_nand_partition[] = { + { + .name = "Bootloader Area", + .offset = 0, + .size = 10 * 1024 * 1024, + }, + { + .name = "User Area", + .offset = 10 * 1024 * 1024, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(ek_nand_partition); + return ek_nand_partition; +} + +static struct at91_nand_data __initdata ek_nand_data = { + .ale = 21, + .cle = 22, +// .det_pin = ... not connected + .rdy_pin = AT91_PIN_PC13, + .enable_pin = AT91_PIN_PC14, + .partition_info = nand_partitions, +#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) + .bus_width_16 = 1, +#else + .bus_width_16 = 0, +#endif +}; + + +/* + * MCI (SD/MMC) + */ +static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, + .wire4 = 1, + .det_pin = AT91_PIN_PC8, + .wp_pin = AT91_PIN_PC4, +// .vcc_pin = ... not connected +}; + +static void __init ek_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&ek_usbh_data); + /* USB Device */ + at91_add_device_udc(&ek_udc_data); + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); + /* NAND */ + at91_add_device_nand(&ek_nand_data); + /* Ethernet */ + at91_add_device_eth(&ek_macb_data); + /* MMC */ + at91_add_device_mmc(0, &ek_mmc_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); +} + +MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") + /* Maintainer: Olimex */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index b343a6c28120..4d1d9c777084 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -25,6 +25,8 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/spi/at73c213.h> +#include <linux/clk.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -37,29 +39,28 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91sam926x_mc.h> #include "generic.h" -/* - * Serial port configuration. - * 0 .. 5 = USART0 .. USART5 - * 6 = DBGU - */ -static struct at91_uart_config __initdata ek_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */ -}; - static void __init ek_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); - /* Setup the serial ports and console */ - at91_init_serial(&ek_uart_config); + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init ek_init_irq(void) @@ -85,6 +86,35 @@ static struct at91_udc_data __initdata ek_udc_data = { /* + * Audio + */ +static struct at73c213_board_info at73c213_data = { + .ssc_id = 0, + .shortname = "AT91SAM9260-EK external DAC", +}; + +#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) +static void __init at73c213_set_clk(struct at73c213_board_info *info) +{ + struct clk *pck0; + struct clk *plla; + + pck0 = clk_get(NULL, "pck0"); + plla = clk_get(NULL, "plla"); + + /* AT73C213 MCK Clock */ + at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */ + + clk_set_parent(pck0, plla); + clk_put(plla); + + info->dac_clk = pck0; +} +#else +static void __init at73c213_set_clk(struct at73c213_board_info *info) {} +#endif + +/* * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { @@ -110,6 +140,8 @@ static struct spi_board_info ek_spi_devices[] = { .chip_select = 0, .max_speed_hz = 10 * 1000 * 1000, .bus_num = 1, + .mode = SPI_MODE_1, + .platform_data = &at73c213_data, }, #endif }; @@ -172,6 +204,24 @@ static struct at91_mmc_data __initdata ek_mmc_data = { // .vcc_pin = ... not connected }; + +/* + * LEDs + */ +static struct gpio_led ek_leds[] = { + { /* "bottom" led, green, userled1 to be defined */ + .name = "ds5", + .gpio = AT91_PIN_PA6, + .active_low = 1, + .default_trigger = "none", + }, + { /* "power" led, yellow */ + .name = "ds1", + .gpio = AT91_PIN_PA9, + .default_trigger = "heartbeat", + } +}; + static void __init ek_board_init(void) { /* Serial */ @@ -190,6 +240,11 @@ static void __init ek_board_init(void) at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ at91_add_device_i2c(NULL, 0); + /* SSC (to AT73C213) */ + at73c213_set_clk(&at73c213_data); + at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 0ce38dfa6ebe..08382c0df221 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -26,6 +26,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/spi/at73c213.h> +#include <linux/clk.h> #include <linux/dm9000.h> #include <linux/fb.h> #include <linux/gpio_keys.h> @@ -44,22 +46,11 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" -/* - * Serial port configuration. - * 0 .. 2 = USART0 .. USART2 - * 3 = DBGU - */ -static struct at91_uart_config __initdata ek_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 1, - .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */ -}; - static void __init ek_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ @@ -68,8 +59,11 @@ static void __init ek_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); - /* Setup the serial ports and console */ - at91_init_serial(&ek_uart_config); + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init ek_init_irq(void) @@ -239,6 +233,35 @@ static void __init ek_add_device_ts(void) {} #endif /* + * Audio + */ +static struct at73c213_board_info at73c213_data = { + .ssc_id = 1, + .shortname = "AT91SAM9261-EK external DAC", +}; + +#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) +static void __init at73c213_set_clk(struct at73c213_board_info *info) +{ + struct clk *pck2; + struct clk *plla; + + pck2 = clk_get(NULL, "pck2"); + plla = clk_get(NULL, "plla"); + + /* AT73C213 MCK Clock */ + at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */ + + clk_set_parent(pck2, plla); + clk_put(plla); + + info->dac_clk = pck2; +} +#else +static void __init at73c213_set_clk(struct at73c213_board_info *info) {} +#endif + +/* * SPI devices */ static struct spi_board_info ek_spi_devices[] = { @@ -256,6 +279,7 @@ static struct spi_board_info ek_spi_devices[] = { .bus_num = 0, .platform_data = &ads_info, .irq = AT91SAM9261_ID_IRQ0, + .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ }, #endif #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) @@ -271,6 +295,9 @@ static struct spi_board_info ek_spi_devices[] = { .chip_select = 3, .max_speed_hz = 10 * 1000 * 1000, .bus_num = 0, + .mode = SPI_MODE_1, + .platform_data = &at73c213_data, + .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */ }, #endif }; @@ -460,6 +487,29 @@ static void __init ek_add_device_buttons(void) static void __init ek_add_device_buttons(void) {} #endif +/* + * LEDs + */ +static struct gpio_led ek_leds[] = { + { /* "bottom" led, green, userled1 to be defined */ + .name = "ds7", + .gpio = AT91_PIN_PA14, + .active_low = 1, + .default_trigger = "none", + }, + { /* "top" led, green, userled2 to be defined */ + .name = "ds8", + .gpio = AT91_PIN_PA13, + .active_low = 1, + .default_trigger = "none", + }, + { /* "power" led, yellow */ + .name = "ds1", + .gpio = AT91_PIN_PA23, + .default_trigger = "heartbeat", + } +}; + static void __init ek_board_init(void) { /* Serial */ @@ -481,6 +531,9 @@ static void __init ek_board_init(void) at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); /* Touchscreen */ ek_add_device_ts(); + /* SSC (to AT73C213) */ + at73c213_set_clk(&at73c213_data); + at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX); #else /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); @@ -489,6 +542,8 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* Push Buttons */ ek_add_device_buttons(); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bf103b24c937..b4cd5d0ed597 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -43,29 +43,24 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" -/* - * Serial port configuration. - * 0 .. 2 = USART0 .. USART2 - * 3 = DBGU - */ -static struct at91_uart_config __initdata ek_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */ -}; - static void __init ek_map_io(void) { /* Initialize processor: 16.367 MHz crystal */ at91sam9263_initialize(16367660); - /* Setup the serial ports and console */ - at91_init_serial(&ek_uart_config); + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init ek_init_irq(void) @@ -341,7 +336,7 @@ static struct gpio_led ek_leds[] = { .name = "ds3", .gpio = AT91_PIN_PB7, .default_trigger = "heartbeat", - }, + } }; diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index bc0546d7245f..ffc0597aee8d 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -29,29 +29,24 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata ek_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init ek_map_io(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9rl_initialize(12000000); - /* Setup the serial ports and console */ - at91_init_serial(&ek_uart_config); + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init ek_init_irq(void) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c new file mode 100755 index 000000000000..b5717108991d --- /dev/null +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -0,0 +1,683 @@ +/* + * linux/arch/arm/mach-at91/board-yl-9200.c + * + * Adapted from: + *various board files in + * /arch/arm/mach-at91 + * modifications to convert to YL-9200 platform + * Copyright (C) 2007 S.Birtles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +/*#include <linux/can_bus/candata.h>*/ +#include <linux/spi/ads7846.h> +#include <linux/mtd/physmap.h> + +/*#include <sound/gpio_sounder.h>*/ +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91rm9200_mc.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> + +#include "generic.h" +#include <asm/arch/at91_pio.h> + +#define YL_9200_FLASH_BASE AT91_CHIPSELECT_0 +#define YL_9200_FLASH_SIZE 0x800000 + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + *atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL + *atmel_usart.1: ttyS1 at MMIO 0xfffc0000 (irq = 6) is a ATMEL_SERIAL + *atmel_usart.2: ttyS2 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL + *atmel_usart.3: ttyS3 at MMIO 0xfffc8000 (irq = 8) is a ATMEL_SERIAL + *atmel_usart.4: ttyS4 at MMIO 0xfffcc000 (irq = 9) is a ATMEL_SERIAL + * on the YL-9200 we are sitting at the following + *ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL + *ttyS1 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL + */ + +/* extern void __init yl_9200_add_device_sounder(struct gpio_sounder *sounders, int nr);*/ + +static struct at91_uart_config __initdata yl_9200_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 3, + .tty_map = { 4, 1, 0, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; + +static void __init yl_9200_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + /*Also initialises register clocks & gpio*/ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/ + + /* Setup the serial ports and console */ + at91_init_serial(&yl_9200_uart_config); + + /* Setup the LEDs D2=PB17,D3=PB16 */ + at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/ +} + +static void __init yl_9200_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata yl_9200_eth_data = { + .phy_irq_pin = AT91_PIN_PB28, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata yl_9200_usbh_data = { + .ports = 1, /* this should be 1 not 2 for the Yl9200*/ +}; + +static struct at91_udc_data __initdata yl_9200_udc_data = { +/*on sheet 7 Schemitic rev 1.0*/ + .pullup_pin = AT91_PIN_PC4, + .vbus_pin= AT91_PIN_PC5, + .pullup_active_low = 1, /*ACTIVE LOW!! due to PNP transistor on page 7*/ + +}; +/* +static struct at91_cf_data __initdata yl_9200_cf_data = { +TODO S.BIRTLES + .det_pin = AT91_PIN_xxx, + .rst_pin = AT91_PIN_xxx, + .irq_pin = ... not connected + .vcc_pin = ... always powered + +}; +*/ +static struct at91_mmc_data __initdata yl_9200_mmc_data = { + .det_pin = AT91_PIN_PB9, /*THIS LOOKS CORRECT SHEET7*/ +/* .wp_pin = ... not connected SHEET7*/ + .slot_b = 0, + .wire4 = 1, + +}; + +/* -------------------------------------------------------------------- + * Touch screen + * -------------------------------------------------------------------- */ +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static int ads7843_pendown_state(void) +{ + return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */ +} + +static void __init at91_init_device_ts(void) +{ +/*IMPORTANT NOTE THE SPI INTERFACE IS ALREADY CONFIGURED BY XXX_DEVICES.C +THAT IS TO SAY THAT MISO,MOSI,SPCK AND CS are already configured +we only need to enable the other datapins which are: +PB10/RK1 BUSY +*/ +/* Touchscreen BUSY signal , pin,use pullup ( TODO not currently used in the ADS7843/6.c driver)*/ +at91_set_gpio_input(AT91_PIN_PB10, 1); +} + +#else +static void __init at91_init_device_ts(void) {} +#endif + +static struct ads7846_platform_data ads_info = { + .model = 7843, + .x_min = 150, + .x_max = 3830, + .y_min = 190, + .y_max = 3830, + .vref_delay_usecs = 100, +/* for a 8" touch screen*/ + //.x_plate_ohms = 603, //= 450, S.Birtles TODO + //.y_plate_ohms = 332, //= 250, S.Birtles TODO +/*for a 10.4" touch screen*/ + //.x_plate_ohms =611, + //.y_plate_ohms =325, + + .x_plate_ohms = 576, + .y_plate_ohms = 366, + // + .pressure_max = 15000, /*generally nonsense on the 7843*/ + /*number of times to send query to chip in a given run 0 equals one time (do not set to 0!! ,there is a bug in ADS 7846 code)*/ + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7843_pendown_state, +}; + +/*static struct canbus_platform_data can_info = { + .model = 2510, +}; +*/ + +static struct spi_board_info yl_9200_spi_devices[] = { +/*this sticks it at: + /sys/devices/platform/atmel_spi.0/spi0.0 + /sys/bus/platform/devices/ +Documentation/spi IIRC*/ + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + /*(this IS correct 04-NOV-2007)*/ + { + .modalias = "ads7846", /* because the driver is called ads7846*/ + .chip_select = 0, /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */ +/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select*/ + /*.controller_data =AT91_PIN_PA3 ,*/ + .max_speed_hz = 5000*26, /*(4700 * 26)-125000 * 26, (max sample rate @ 3V) * (cmd + data + overhead) */ + .bus_num = 0, + .platform_data = &ads_info, + .irq = AT91_PIN_PB11, + }, +#endif +/*we need to put our CAN driver data here!!*/ +/*THIS IS ALL DUMMY DATA*/ +/* { + .modalias = "mcp2510", //DUMMY for MCP2510 chip + .chip_select = 1,*/ /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */ + /*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select */ + /* .controller_data =AT91_PIN_PA4 , + .max_speed_hz = 25000 * 26, + .bus_num = 0, + .platform_data = &can_info, + .irq = AT91_PIN_PC0, + }, + */ + //max SPI chip needs to go here +}; + +static struct mtd_partition __initdata yl_9200_nand_partition[] = { + { + .name = "AT91 NAND partition 1, boot", + .offset = 0, + .size = 1 * SZ_256K + }, + { + .name = "AT91 NAND partition 2, kernel", + .offset = 1 * SZ_256K, + .size = 2 * SZ_1M - 1 * SZ_256K + }, + { + .name = "AT91 NAND partition 3, filesystem", + .offset = 2 * SZ_1M, + .size = 14 * SZ_1M + }, + { + .name = "AT91 NAND partition 4, storage", + .offset = 16 * SZ_1M, + .size = 16 * SZ_1M + }, + { + .name = "AT91 NAND partition 5, ext-fs", + .offset = 32 * SZ_1M, + .size = 32 * SZ_1M + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(yl_9200_nand_partition); + return yl_9200_nand_partition; +} + +static struct at91_nand_data __initdata yl_9200_nand_data = { + .ale= 6, + .cle= 7, + /*.det_pin = AT91_PIN_PCxx,*/ /*we don't have a det pin because NandFlash is fixed to board*/ + .rdy_pin = AT91_PIN_PC14, /*R/!B Sheet10*/ + .enable_pin = AT91_PIN_PC15, /*!CE Sheet10 */ + .partition_info = nand_partitions, +}; + + + +/* +TODO S.Birtles +potentially a problem with the size above +physmap platform flash device: 00800000 at 10000000 +physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank +NOR chip too large to fit in mapping. Attempting to cope... + Intel/Sharp Extended Query Table at 0x0031 +Using buffer write method +cfi_cmdset_0001: Erase suspend on write enabled +Reducing visibility of 16384KiB chip to 8192KiB +*/ + +static struct mtd_partition yl_9200_flash_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x001C0000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00200000 + } + +}; + +static struct physmap_flash_data yl_9200_flash_data = { + .width = 2, + .parts = yl_9200_flash_partitions, + .nr_parts = ARRAY_SIZE(yl_9200_flash_partitions), +}; + +static struct resource yl_9200_flash_resources[] = { +{ + .start = YL_9200_FLASH_BASE, + .end = YL_9200_FLASH_BASE + YL_9200_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device yl_9200_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &yl_9200_flash_data, + }, + .resource = yl_9200_flash_resources, + .num_resources = ARRAY_SIZE(yl_9200_flash_resources), +}; + + +static struct gpio_led yl_9200_leds[] = { +/*D2 &D3 are passed directly in via at91_init_leds*/ + { + .name = "led4", /*D4*/ + .gpio = AT91_PIN_PB15, + .active_low = 1, + .default_trigger = "heartbeat", + /*.default_trigger = "timer",*/ + }, + { + .name = "led5", /*D5*/ + .gpio = AT91_PIN_PB8, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; + +//static struct gpio_sounder yl_9200_sounder[] = {*/ +/*This is a simple speaker attached to a gpo line*/ + +// { +// .name = "Speaker", /*LS1*/ +// .gpio = AT91_PIN_PA22, +// .active_low = 0, +// .default_trigger = "heartbeat", + /*.default_trigger = "timer",*/ +// }, +//}; + + + +static struct i2c_board_info __initdata yl_9200_i2c_devices[] = { + { + /*TODO*/ + I2C_BOARD_INFO("CS4334", 0x00), + } +}; + + + /* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button yl_9200_buttons[] = { + { + .gpio = AT91_PIN_PA24, + .code = BTN_2, + .desc = "SW2", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB1, + .code = BTN_3, + .desc = "SW3", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB2, + .code = BTN_4, + .desc = "SW4", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB6, + .code = BTN_5, + .desc = "SW5", + .active_low = 1, + .wakeup = 1, + }, + +}; + +static struct gpio_keys_platform_data yl_9200_button_data = { + .buttons = yl_9200_buttons, + .nbuttons = ARRAY_SIZE(yl_9200_buttons), +}; + +static struct platform_device yl_9200_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &yl_9200_button_data, + } +}; + +static void __init yl_9200_add_device_buttons(void) +{ + //SW2 + at91_set_gpio_input(AT91_PIN_PA24, 0); + at91_set_deglitch(AT91_PIN_PA24, 1); + + //SW3 + at91_set_gpio_input(AT91_PIN_PB1, 0); + at91_set_deglitch(AT91_PIN_PB1, 1); + //SW4 + at91_set_gpio_input(AT91_PIN_PB2, 0); + at91_set_deglitch(AT91_PIN_PB2, 1); + + //SW5 + at91_set_gpio_input(AT91_PIN_PB6, 0); + at91_set_deglitch(AT91_PIN_PB6, 1); + + + at91_set_gpio_output(AT91_PIN_PB7, 1); /* #TURN BUTTONS ON, SHEET 5 of schematics */ + platform_device_register(&yl_9200_button_device); +} +#else +static void __init yl_9200_add_device_buttons(void) {} +#endif + +#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) +#include <video/s1d13xxxfb.h> + +/* EPSON S1D13806 FB (discontinued chip)*/ +/* EPSON S1D13506 FB */ + +#define AT91_FB_REG_BASE 0x80000000L +#define AT91_FB_REG_SIZE 0x200 +#define AT91_FB_VMEM_BASE 0x80200000L +#define AT91_FB_VMEM_SIZE 0x200000L + +/*#define S1D_DISPLAY_WIDTH 640*/ +/*#define S1D_DISPLAY_HEIGHT 480*/ + + +static void __init yl_9200_init_video(void) +{ + at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6); + at91_sys_write(AT91_PIOC + PIO_BSR,0); + at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6); + + at91_sys_write( AT91_SMC_CSR(2), + AT91_SMC_NWS_(0x4) | + AT91_SMC_WSEN | + AT91_SMC_TDF_(0x100) | + AT91_SMC_DBW + ); + + + +} + + +static struct s1d13xxxfb_regval yl_9200_s1dfb_initregs[] = +{ + {S1DREG_MISC, 0x00}, /* Miscellaneous Register*/ + {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/ + {S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/ + {S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/ + {S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/ + {S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/ + {S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/ + {S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/ + {S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/ + {S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/ + {S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/ + {S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/ + {S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/ + {S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/ + {S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/ + {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/ + {S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/ + {S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/ + {S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/ + {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/ + {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/ + {S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/ + {S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/ + {S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/ + {S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/ + {S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/ + {S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/ + {S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/ + {S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/ + {S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/ + {S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/ + {S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/ + {S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/ + {S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/ + {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/ + {S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/ + {S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/ + {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/ + {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/ + {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/ + {S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/ + {S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/ + {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/ + {S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */ + {S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/ + {S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/ + {S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/ + {S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/ + {S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/ + {S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/ + {S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/ + {S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/ + {S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/ + {S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/ + {S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/ + {S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/ + {S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/ + {S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/ + {S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/ + {S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/ + {S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/ + {S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/ + {S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/ + {S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/ + {S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/ + {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/ + {S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/ + {S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/ + {S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/ + {S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/ + {S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/ + {S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/ + {S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/ + {S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/ + {S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/ + {S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/ + {S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/ + {S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/ + {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/ + {S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/ + {S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/ + {S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/ + {S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/ + {S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/ + {S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/ + {S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/ + {S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/ + {S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/ + {S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/ + {S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/ + {S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/ + {S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/ + {S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/ + {S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/ + {S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/ + {S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/ + {S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/ + {S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/ + {S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/ + {S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/ + {S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/ + {S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/ + {S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/ + {S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/ + {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/ +}; + +static u64 s1dfb_dmamask = 0xffffffffUL; + +static struct s1d13xxxfb_pdata yl_9200_s1dfb_pdata = { + .initregs = yl_9200_s1dfb_initregs, + .initregssize = ARRAY_SIZE(yl_9200_s1dfb_initregs), + .platform_init_video = yl_9200_init_video, +}; + +static struct resource yl_9200_s1dfb_resource[] = { + [0] = { /* video mem */ + .name = "s1d13xxxfb memory", + /* .name = "s1d13806 memory",*/ + .start = AT91_FB_VMEM_BASE, + .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* video registers */ + .name = "s1d13xxxfb registers", + /* .name = "s1d13806 registers",*/ + .start = AT91_FB_REG_BASE, + .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device yl_9200_s1dfb_device = { + /*TODO S.Birtles , really we need the chip revision in here as well*/ + .name = "s1d13806fb", + /* .name = "s1d13506fb",*/ + .id = -1, + .dev = { + /*TODO theres a waring here!!*/ + /*WARNING: vmlinux.o(.data+0x2dbc): Section mismatch: reference to .init.text: (between 'yl_9200_s1dfb_pdata' and 's1dfb_dmamask')*/ + .dma_mask = &s1dfb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &yl_9200_s1dfb_pdata, + }, + .resource = yl_9200_s1dfb_resource, + .num_resources = ARRAY_SIZE(yl_9200_s1dfb_resource), +}; + +void __init yl_9200_add_device_video(void) +{ + platform_device_register(&yl_9200_s1dfb_device); +} +#else + void __init yl_9200_add_device_video(void) {} +#endif + +/*this is not called first , yl_9200_map_io is called first*/ +static void __init yl_9200_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&yl_9200_eth_data); + /* USB Host */ + at91_add_device_usbh(&yl_9200_usbh_data); + /* USB Device */ + at91_add_device_udc(&yl_9200_udc_data); + /* pullup_pin it is actually active low, but this is not needed, driver sets it up */ + /*at91_set_multi_drive(yl_9200_udc_data.pullup_pin, 0);*/ + + /* Compact Flash */ + /*at91_add_device_cf(&yl_9200_cf_data);*/ + + /* I2C */ + at91_add_device_i2c(yl_9200_i2c_devices, ARRAY_SIZE(yl_9200_i2c_devices)); + /* SPI */ + /*TODO YL9200 we have 2 spi interfaces touch screen & CAN*/ + /* AT91_PIN_PA5, AT91_PIN_PA6 , are used on the max 485 NOT SPI*/ + + /*touch screen and CAN*/ + at91_add_device_spi(yl_9200_spi_devices, ARRAY_SIZE(yl_9200_spi_devices)); + + /*Basically the TS uses PB11 & PB10 , PB11 is configured by the SPI system BP10 IS NOT USED!!*/ + /* we need this incase the board is running without a touch screen*/ + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + at91_init_device_ts(); /*init the touch screen device*/ + #endif + /* DataFlash card */ + at91_add_device_mmc(0, &yl_9200_mmc_data); + /* NAND */ + at91_add_device_nand(&yl_9200_nand_data); + /* NOR Flash */ + platform_device_register(&yl_9200_flash); + /* LEDs. Note!! this does not include the led's we passed for the processor status */ + at91_gpio_leds(yl_9200_leds, ARRAY_SIZE(yl_9200_leds)); + /* VGA */ + /*this is self registered by including the s1d13xxx chip in the kernel build*/ + yl_9200_add_device_video(); + /* Push Buttons */ + yl_9200_add_device_buttons(); + /*TODO fixup the Sounder */ +// yl_9200_add_device_sounder(yl_9200_sounder,ARRAY_SIZE(yl_9200_sounder)); + +} + +MACHINE_START(YL9200, "uCdragon YL-9200") + /* Maintainer: S.Birtles*/ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = yl_9200_map_io, + .init_irq = yl_9200_init_irq, + .init_machine = yl_9200_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de6424e9ac02..a33dfe450726 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -23,7 +23,6 @@ #include <linux/delay.h> #include <linux/clk.h> -#include <asm/semaphore.h> #include <asm/io.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index a67defd50438..aa863c157708 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -26,12 +26,139 @@ #include <asm/mach-types.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91rm9200_mc.h> #include <asm/arch/gpio.h> #include <asm/arch/cpu.h> #include "generic.h" +#ifdef CONFIG_ARCH_AT91RM9200 +#include <asm/arch/at91rm9200_mc.h> + +/* + * The AT91RM9200 goes into self-refresh mode with this command, and will + * terminate self-refresh automatically on the next SDRAM access. + */ +#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1) +#define sdram_selfrefresh_disable() do {} while (0) + +#elif defined(CONFIG_ARCH_AT91CAP9) +#include <asm/arch/at91cap9_ddrsdr.h> + +static u32 saved_lpr; + +static inline void sdram_selfrefresh_enable(void) +{ + u32 lpr; + + saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); + + lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; + at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); +} + +#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) + +#else +#include <asm/arch/at91sam9_sdramc.h> + +#ifdef CONFIG_ARCH_AT91SAM9263 +/* + * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; + * handle those cases both here and in the Suspend-To-RAM support. + */ +#define AT91_SDRAMC AT91_SDRAMC0 +#warning Assuming EB1 SDRAM controller is *NOT* used +#endif + +static u32 saved_lpr; + +static inline void sdram_selfrefresh_enable(void) +{ + u32 lpr; + + saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); + + lpr = saved_lpr & ~AT91_SDRAMC_LPCB; + at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); +} + +#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) + +#endif + + +/* + * Show the reason for the previous system reset. + */ +#if defined(AT91_SHDWC) + +#include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> + +static void __init show_reset_status(void) +{ + static char reset[] __initdata = "reset"; + + static char general[] __initdata = "general"; + static char wakeup[] __initdata = "wakeup"; + static char watchdog[] __initdata = "watchdog"; + static char software[] __initdata = "software"; + static char user[] __initdata = "user"; + static char unknown[] __initdata = "unknown"; + + static char signal[] __initdata = "signal"; + static char rtc[] __initdata = "rtc"; + static char rtt[] __initdata = "rtt"; + static char restore[] __initdata = "power-restored"; + + char *reason, *r2 = reset; + u32 reset_type, wake_type; + + reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; + wake_type = at91_sys_read(AT91_SHDW_SR); + + switch (reset_type) { + case AT91_RSTC_RSTTYP_GENERAL: + reason = general; + break; + case AT91_RSTC_RSTTYP_WAKEUP: + /* board-specific code enabled the wakeup sources */ + reason = wakeup; + + /* "wakeup signal" */ + if (wake_type & AT91_SHDW_WAKEUP0) + r2 = signal; + else { + r2 = reason; + if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */ + reason = rtt; + else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */ + reason = rtc; + else if (wake_type == 0) /* power-restored wakeup */ + reason = restore; + else /* unknown wakeup */ + reason = unknown; + } + break; + case AT91_RSTC_RSTTYP_WATCHDOG: + reason = watchdog; + break; + case AT91_RSTC_RSTTYP_SOFTWARE: + reason = software; + break; + case AT91_RSTC_RSTTYP_USER: + reason = user; + break; + default: + reason = unknown; + break; + } + pr_info("AT91: Starting after %s %s\n", reason, r2); +} +#else +static void __init show_reset_status(void) {} +#endif + static int at91_pm_valid_state(suspend_state_t state) { @@ -125,6 +252,11 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock); static void (*slow_clock)(void); +#ifdef CONFIG_AT91_SLOW_CLOCK +extern void at91_slow_clock(void); +extern u32 at91_slow_clock_sz; +#endif + static int at91_pm_enter(suspend_state_t state) { @@ -158,11 +290,14 @@ static int at91_pm_enter(suspend_state_t state) * turning off the main oscillator; reverse on wakeup. */ if (slow_clock) { +#ifdef CONFIG_AT91_SLOW_CLOCK + /* copy slow_clock handler to SRAM, and call it */ + memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); +#endif slow_clock(); break; } else { - /* DEVELOPMENT ONLY */ - pr_info("AT91: PM - no slow clock mode yet ...\n"); + pr_info("AT91: PM - no slow clock mode enabled ...\n"); /* FALLTHROUGH leaving master clock alone */ } @@ -175,13 +310,15 @@ static int at91_pm_enter(suspend_state_t state) case PM_SUSPEND_STANDBY: /* * NOTE: the Wait-for-Interrupt instruction needs to be - * in icache so the SDRAM stays in self-refresh mode until - * the wakeup IRQ occurs. + * in icache so no SDRAM accesses are needed until the + * wakeup IRQ occurs and self-refresh is terminated. */ asm("b 1f; .align 5; 1:"); asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ - at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */ - /* fall though to next state */ + sdram_selfrefresh_enable(); + asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ + sdram_selfrefresh_disable(); + break; case PM_SUSPEND_ON: asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ @@ -196,6 +333,7 @@ static int at91_pm_enter(suspend_state_t state) at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); error: + sdram_selfrefresh_disable(); target_state = PM_SUSPEND_ON; at91_irq_resume(); at91_gpio_resume(); @@ -220,21 +358,20 @@ static struct platform_suspend_ops at91_pm_ops ={ static int __init at91_pm_init(void) { - printk("AT91: Power Management\n"); - -#ifdef CONFIG_AT91_PM_SLOW_CLOCK - /* REVISIT allocations of SRAM should be dynamically managed. - * FIQ handlers and other components will want SRAM/TCM too... - */ - slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K)); - memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz); +#ifdef CONFIG_AT91_SLOW_CLOCK + slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz); #endif - /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */ + pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : "")); + +#ifdef CONFIG_ARCH_AT91RM9200 + /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */ at91_sys_write(AT91_SDRAMC_LPR, 0); +#endif suspend_set_ops(&at91_pm_ops); + show_reset_status(); return 0; } arch_initcall(at91_pm_init); diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 0e2b641268ad..dbaae5f746a1 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -31,6 +31,8 @@ config ARCH_EDB7211 bool "EDB7211" select ISA select ARCH_DISCONTIGMEM_ENABLE + select ARCH_SPARSEMEM_ENABLE + select ARCH_SELECT_MEMORY_MODEL help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 4143828a9684..c6b94f60e0b2 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -311,11 +311,7 @@ static const struct file_operations proc_davinci_ck_operations = { static int __init davinci_ck_proc_init(void) { - struct proc_dir_entry *entry; - - entry = create_proc_entry("davinci_clocks", 0, NULL); - if (entry) - entry->proc_fops = &proc_davinci_ck_operations; + proc_create("davinci_clocks", 0, NULL, &proc_davinci_ck_operations); return 0; } diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 0ecf99761feb..c1252ca9648e 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o clock.o gpio.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 91f6a07a51d5..1d7bca6aa441 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -159,7 +159,7 @@ static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c }; -static void update_gpio_int_params(unsigned port) +void ep93xx_gpio_update_int_params(unsigned port) { BUG_ON(port > 2); @@ -175,98 +175,10 @@ static void update_gpio_int_params(unsigned port) EP93XX_GPIO_REG(int_en_register_offset[port])); } -/* Port ordering is: A B F D E C G H */ -static const u8 data_register_offset[8] = { - 0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40, -}; - -static const u8 data_direction_register_offset[8] = { - 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44, -}; - -#define GPIO_IN 0 -#define GPIO_OUT 1 - -static void ep93xx_gpio_set_direction(unsigned line, int direction) -{ - unsigned int data_direction_register; - unsigned long flags; - unsigned char v; - - data_direction_register = - EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]); - - local_irq_save(flags); - if (direction == GPIO_OUT) { - if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) { - /* Port A/B/F */ - gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); - update_gpio_int_params(line >> 3); - } - - v = __raw_readb(data_direction_register); - v |= 1 << (line & 7); - __raw_writeb(v, data_direction_register); - } else if (direction == GPIO_IN) { - v = __raw_readb(data_direction_register); - v &= ~(1 << (line & 7)); - __raw_writeb(v, data_direction_register); - } - local_irq_restore(flags); -} - -int gpio_direction_input(unsigned gpio) -{ - if (gpio > EP93XX_GPIO_LINE_MAX) - return -EINVAL; - - ep93xx_gpio_set_direction(gpio, GPIO_IN); - - return 0; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - if (gpio > EP93XX_GPIO_LINE_MAX) - return -EINVAL; - - gpio_set_value(gpio, value); - ep93xx_gpio_set_direction(gpio, GPIO_OUT); - - return 0; -} -EXPORT_SYMBOL(gpio_direction_output); - -int gpio_get_value(unsigned gpio) -{ - unsigned int data_register; - - data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); - - return !!(__raw_readb(data_register) & (1 << (gpio & 7))); -} -EXPORT_SYMBOL(gpio_get_value); - -void gpio_set_value(unsigned gpio, int value) +void ep93xx_gpio_int_mask(unsigned line) { - unsigned int data_register; - unsigned long flags; - unsigned char v; - - data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); - - local_irq_save(flags); - v = __raw_readb(data_register); - if (value) - v |= 1 << (gpio & 7); - else - v &= ~(1 << (gpio & 7)); - __raw_writeb(v, data_register); - local_irq_restore(flags); + gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); } -EXPORT_SYMBOL(gpio_set_value); - /************************************************************************* * EP93xx IRQ handling @@ -316,7 +228,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq) if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); } __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); @@ -332,7 +244,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq) gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_unmasked[port] &= ~port_mask; - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); } @@ -343,7 +255,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq) int port = line >> 3; gpio_int_unmasked[port] &= ~(1 << (line & 7)); - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); } static void ep93xx_gpio_irq_unmask(unsigned int irq) @@ -352,7 +264,7 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq) int port = line >> 3; gpio_int_unmasked[port] |= 1 << (line & 7); - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); } @@ -368,7 +280,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) const int port = gpio >> 3; const int port_mask = 1 << (gpio & 7); - ep93xx_gpio_set_direction(gpio, GPIO_IN); + gpio_direction_input(gpio); switch (type) { case IRQT_RISING: @@ -411,7 +323,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) desc->status &= ~IRQ_TYPE_SENSE_MASK; desc->status |= type & IRQ_TYPE_SENSE_MASK; - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); return 0; } @@ -549,6 +461,7 @@ static struct platform_device ep93xx_ohci_device = { .resource = ep93xx_ohci_resources, }; +extern void ep93xx_gpio_init(void); void __init ep93xx_init_devices(void) { @@ -562,6 +475,8 @@ void __init ep93xx_init_devices(void) __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG); + ep93xx_gpio_init(); + amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); amba_device_register(&uart3_device, &iomem_resource); diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c new file mode 100644 index 000000000000..dc2e4c00d989 --- /dev/null +++ b/arch/arm/mach-ep93xx/gpio.c @@ -0,0 +1,158 @@ +/* + * linux/arch/arm/mach-ep93xx/gpio.c + * + * Generic EP93xx GPIO handling + * + * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> + * + * Based on code originally from: + * linux/arch/arm/mach-ep93xx/core.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/seq_file.h> + +#include <asm/arch/ep93xx-regs.h> +#include <asm/io.h> +#include <asm/gpio.h> + +struct ep93xx_gpio_chip { + struct gpio_chip chip; + + unsigned int data_reg; + unsigned int data_dir_reg; +}; + +#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) + +/* From core.c */ +extern void ep93xx_gpio_int_mask(unsigned line); +extern void ep93xx_gpio_update_int_params(unsigned port); + +static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + unsigned long flags; + u8 v; + + local_irq_save(flags); + v = __raw_readb(ep93xx_chip->data_dir_reg); + v &= ~(1 << offset); + __raw_writeb(v, ep93xx_chip->data_dir_reg); + local_irq_restore(flags); + + return 0; +} + +static int ep93xx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + unsigned long flags; + int line; + u8 v; + + local_irq_save(flags); + + /* Set the value */ + v = __raw_readb(ep93xx_chip->data_reg); + if (val) + v |= (1 << offset); + else + v &= ~(1 << offset); + __raw_writeb(v, ep93xx_chip->data_reg); + + /* Drive as an output */ + line = chip->base + offset; + if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { + /* Ports A/B/F */ + ep93xx_gpio_int_mask(line); + ep93xx_gpio_update_int_params(line >> 3); + } + + v = __raw_readb(ep93xx_chip->data_dir_reg); + v |= (1 << offset); + __raw_writeb(v, ep93xx_chip->data_dir_reg); + + local_irq_restore(flags); + + return 0; +} + +static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + + return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); +} + +static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + unsigned long flags; + u8 v; + + local_irq_save(flags); + v = __raw_readb(ep93xx_chip->data_reg); + if (val) + v |= (1 << offset); + else + v &= ~(1 << offset); + __raw_writeb(v, ep93xx_chip->data_reg); + local_irq_restore(flags); +} + +static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + u8 data_reg, data_dir_reg; + int i; + + data_reg = __raw_readb(ep93xx_chip->data_reg); + data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg); + + for (i = 0; i < chip->ngpio; i++) + seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i, + (data_reg & (1 << i)) ? "set" : "clear", + (data_dir_reg & (1 << i)) ? "out" : "in"); +} + +#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ + { \ + .chip = { \ + .label = name, \ + .direction_input = ep93xx_gpio_direction_input, \ + .direction_output = ep93xx_gpio_direction_output, \ + .get = ep93xx_gpio_get, \ + .set = ep93xx_gpio_set, \ + .dbg_show = ep93xx_gpio_dbg_show, \ + .base = base_gpio, \ + .ngpio = 8, \ + }, \ + .data_reg = EP93XX_GPIO_REG(dr), \ + .data_dir_reg = EP93XX_GPIO_REG(ddr), \ + } + +static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { + EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), + EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), + EP93XX_GPIO_BANK("C", 0x30, 0x34, 40), + EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), + EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), + EP93XX_GPIO_BANK("F", 0x08, 0x18, 16), + EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), + EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), +}; + +void __init ep93xx_gpio_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) + gpiochip_add(&ep93xx_gpio_banks[i].chip); +} diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c index 95a1e263f7fa..8d761fdd2ecd 100644 --- a/arch/arm/mach-integrator/clock.c +++ b/arch/arm/mach-integrator/clock.c @@ -17,7 +17,6 @@ #include <linux/clk.h> #include <linux/mutex.h> -#include <asm/semaphore.h> #include <asm/hardware/icst525.h> #include "clock.h" diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 92d79fb39311..62e653a3ea1a 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev) lm_set_drvdata(dev, impd1); - printk("IM-PD1 found at 0x%08lx\n", dev->resource.start); + printk("IM-PD1 found at 0x%08lx\n", + (unsigned long)dev->resource.start); for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { impd1->vcos[i].owner = THIS_MODULE, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index d55fa4e9bb43..c07f497000ca 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, v3_readb(V3_LB_ISTAT)); printk(KERN_DEBUG "%s", buf); - printascii(buf); #endif v3_writeb(V3_LB_ISTAT, 0); @@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid) unsigned long pc = instruction_pointer(regs); unsigned long instr = *(unsigned long *)pc; char buf[128]; + extern void printascii(const char *); sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c index 5278f589fcee..8508a0db3eaf 100644 --- a/arch/arm/mach-integrator/time.c +++ b/arch/arm/mach-integrator/time.c @@ -124,6 +124,9 @@ static int rtc_probe(struct amba_device *dev, void *id) xtime.tv_sec = __raw_readl(rtc_base + RTC_DR); + /* note that 'dev' is merely used for irq disambiguation; + * it is not actually referenced in the irq handler + */ ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED, "rtc-pl030", dev); if (ret) diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig index dbe07c9472ed..5e8c6f7dfabb 100644 --- a/arch/arm/mach-iop32x/Kconfig +++ b/arch/arm/mach-iop32x/Kconfig @@ -34,14 +34,6 @@ config MACH_N2100 Say Y here if you want to run your kernel on the Thecus n2100 NAS appliance. -config IOP3XX_ATU - bool "Enable the PCI Controller" - default y - help - Say Y here if you want the IOP to initialize its PCI Controller. - Say N if the IOP is an add in card, the host system owns the PCI - bus in this case. - config MACH_EM7210 bool "Enable support for the Lanner EM7210" help diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index c947152f9a3c..4877597c8758 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -50,8 +50,7 @@ static struct sys_timer em7210_timer = { */ static struct i2c_board_info __initdata em7210_i2c_devices[] = { { - I2C_BOARD_INFO("rtc-rs5c372", 0x32), - .type = "rs5c372a", + I2C_BOARD_INFO("rs5c372a", 0x32), }, }; diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index d2a7b04f1cb0..d4fca75ce542 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -176,12 +176,10 @@ static struct f75375s_platform_data glantank_f75375s = { static struct i2c_board_info __initdata glantank_i2c_devices[] = { { - I2C_BOARD_INFO("rtc-rs5c372", 0x32), - .type = "rs5c372a", + I2C_BOARD_INFO("rs5c372a", 0x32), }, { I2C_BOARD_INFO("f75375", 0x2e), - .type = "f75375", .platform_data = &glantank_f75375s, }, }; diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index 98cfa1cd6bdb..4a89823bcebb 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -178,10 +178,9 @@ static struct hw_pci iq31244_pci __initdata = { static int __init iq31244_pci_init(void) { - if (is_ep80219()) { - if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) - pci_common_init(&ep80219_pci); - } else if (machine_is_iq31244()) { + if (is_ep80219()) + pci_common_init(&ep80219_pci); + else if (machine_is_iq31244()) { if (is_80219()) { printk("note: iq31244 board type has been selected\n"); printk("note: to select ep80219 operation:\n"); @@ -190,9 +189,7 @@ static int __init iq31244_pci_init(void) printk("\t2/ update boot loader to pass" " the ep80219 id: %d\n", MACH_TYPE_EP80219); } - - if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) - pci_common_init(&iq31244_pci); + pci_common_init(&iq31244_pci); } return 0; diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 18ad29f213b2..1da3c911edd3 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -106,7 +106,7 @@ static struct hw_pci iq80321_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, .setup = iop3xx_pci_setup, - .preinit = iop3xx_pci_preinit, + .preinit = iop3xx_pci_preinit_cond, .scan = iop3xx_pci_scan_bus, .map_irq = iq80321_pci_map_irq, }; diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index bc91d6e66bc4..2741063bf361 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -208,12 +208,10 @@ static struct f75375s_platform_data n2100_f75375s = { static struct i2c_board_info __initdata n2100_i2c_devices[] = { { - I2C_BOARD_INFO("rtc-rs5c372", 0x32), - .type = "rs5c372b", + I2C_BOARD_INFO("rs5c372b", 0x32), }, { I2C_BOARD_INFO("f75375", 0x2e), - .type = "f75375", .platform_data = &n2100_f75375s, }, }; diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig index 45598e096898..9aa016bb18f9 100644 --- a/arch/arm/mach-iop33x/Kconfig +++ b/arch/arm/mach-iop33x/Kconfig @@ -16,14 +16,6 @@ config MACH_IQ80332 Say Y here if you want to run your kernel on the Intel IQ80332 evaluation kit for the IOP332 chipset. -config IOP3XX_ATU - bool "Enable the PCI Controller" - default y - help - Say Y here if you want the IOP to initialize its PCI Controller. - Say N if the IOP is an add in card, the host system owns the PCI - bus in this case. - endmenu endif diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index 433188ebff2a..de39fd778579 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -89,7 +89,7 @@ static struct hw_pci iq80331_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, .setup = iop3xx_pci_setup, - .preinit = iop3xx_pci_preinit, + .preinit = iop3xx_pci_preinit_cond, .scan = iop3xx_pci_scan_bus, .map_irq = iq80331_pci_map_irq, }; diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 416c09564cc6..4904fd78445f 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -89,7 +89,7 @@ static struct hw_pci iq80332_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, .setup = iop3xx_pci_setup, - .preinit = iop3xx_pci_preinit, + .preinit = iop3xx_pci_preinit_cond, .scan = iop3xx_pci_scan_bus, .map_irq = iq80332_pci_map_irq, }; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 8cb07437a807..a51bfa6978b6 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -65,7 +65,7 @@ static struct platform_device dsmg600_i2c_gpio = { static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = { { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), + I2C_BOARD_INFO("pcf8563", 0x51), }, }; diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index 83c137ec582c..63a23fa4aab4 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -448,7 +448,9 @@ int npe_send_message(struct npe *npe, const void *msg, const char *what) return -ETIMEDOUT; } +#if DEBUG_MSG > 1 debug_msg(npe, "Sending a message took %i cycles\n", cycles); +#endif return 0; } @@ -484,7 +486,9 @@ int npe_recv_message(struct npe *npe, void *msg, const char *what) return -ETIMEDOUT; } +#if DEBUG_MSG > 1 debug_msg(npe, "Receiving a message took %i cycles\n", cycles); +#endif return 0; } diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index e83301325301..fab94eaecee7 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -184,6 +184,8 @@ void qmgr_release_queue(unsigned int queue) case 3: mask[0] = 0xFF; break; } + mask[1] = mask[2] = mask[3] = 0; + while (addr--) shift_mask(mask); diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 159e1c4f1eda..84b5e62a9c0a 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -54,7 +54,7 @@ static struct platform_device nas100d_flash = { static struct i2c_board_info __initdata nas100d_i2c_board_info [] = { { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), + I2C_BOARD_INFO("pcf8563", 0x51), }, }; diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index d9a182895a0f..a48a6655b887 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -57,7 +57,7 @@ static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = { static struct i2c_board_info __initdata nslu2_i2c_board_info [] = { { - I2C_BOARD_INFO("rtc-x1205", 0x6f), + I2C_BOARD_INFO("x1205", 0x6f), }, }; diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 730a3af12c98..ade42b73afbb 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -11,5 +11,8 @@ obj- := # PCI support is optional obj-$(CONFIG_PCI) += pci.o +# LEDs +obj-$(CONFIG_LEDS) += leds.o + # Board-specific support obj-$(CONFIG_MACH_KS8695) += board-micrel.o diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c index 386593f8ac65..3db2ec61d06f 100644 --- a/arch/arm/mach-ks8695/devices.c +++ b/arch/arm/mach-ks8695/devices.c @@ -176,6 +176,27 @@ static void __init ks8695_add_device_watchdog(void) {} #endif +/* -------------------------------------------------------------------- + * LEDs + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) +short ks8695_leds_cpu = -1; +short ks8695_leds_timer = -1; + +void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) +{ + /* Enable GPIO to access the LEDs */ + gpio_direction_output(cpu_led, 1); + gpio_direction_output(timer_led, 1); + + ks8695_leds_cpu = cpu_led; + ks8695_leds_timer = timer_led; +} +#else +void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {} +#endif + /* -------------------------------------------------------------------- */ /* diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c new file mode 100644 index 000000000000..d61762ae50d8 --- /dev/null +++ b/arch/arm/mach-ks8695/leds.c @@ -0,0 +1,94 @@ +/* + * LED driver for KS8695-based boards. + * + * Copyright (C) Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <asm/mach-types.h> +#include <asm/leds.h> +#include <asm/arch/devices.h> +#include <asm/arch/gpio.h> + + +static inline void ks8695_led_on(unsigned int led) +{ + gpio_set_value(led, 0); +} + +static inline void ks8695_led_off(unsigned int led) +{ + gpio_set_value(led, 1); +} + +static inline void ks8695_led_toggle(unsigned int led) +{ + unsigned long is_off = gpio_get_value(led); + if (is_off) + ks8695_led_on(led); + else + ks8695_led_off(led); +} + + +/* + * Handle LED events. + */ +static void ks8695_leds_event(led_event_t evt) +{ + unsigned long flags; + + local_irq_save(flags); + + switch(evt) { + case led_start: /* System startup */ + ks8695_led_on(ks8695_leds_cpu); + break; + + case led_stop: /* System stop / suspend */ + ks8695_led_off(ks8695_leds_cpu); + break; + +#ifdef CONFIG_LEDS_TIMER + case led_timer: /* Every 50 timer ticks */ + ks8695_led_toggle(ks8695_leds_timer); + break; +#endif + +#ifdef CONFIG_LEDS_CPU + case led_idle_start: /* Entering idle state */ + ks8695_led_off(ks8695_leds_cpu); + break; + + case led_idle_end: /* Exit idle state */ + ks8695_led_on(ks8695_leds_cpu); + break; +#endif + + default: + break; + } + + local_irq_restore(flags); +} + + +static int __init leds_init(void) +{ + if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1)) + return -ENODEV; + + leds_event = ks8695_leds_event; + + leds_event(led_start); + return 0; +} + +__initcall(leds_init); diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index 6d26661d99f6..2ef7d0097b38 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -75,10 +75,9 @@ static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc) { u32 mask = CPLD_LATCHED_INTS; irq = IRQ_KEV7A400_CPLD; - for (; mask; mask >>= 1, ++irq) { + for (; mask; mask >>= 1, ++irq) if (mask & 1) - desc[irq].handle (irq, desc); - } + desc_handle_irq(irq, desc); } void __init lh7a40x_init_board_irq (void) diff --git a/arch/arm/mach-ns9xxx/Kconfig b/arch/arm/mach-ns9xxx/Kconfig index 8584ed107991..dd0cd5ac4b8b 100644 --- a/arch/arm/mach-ns9xxx/Kconfig +++ b/arch/arm/mach-ns9xxx/Kconfig @@ -2,9 +2,26 @@ if ARCH_NS9XXX menu "NS9xxx Implementations" +config NS9XXX_HAVE_SERIAL8250 + bool + +config PROCESSOR_NS9360 + bool + +config MODULE_CC9P9360 + bool + select PROCESSOR_NS9360 + +config BOARD_A9M9750DEV + select NS9XXX_HAVE_SERIAL8250 + bool + +config BOARD_JSCC9P9360 + bool + config MACH_CC9P9360DEV bool "ConnectCore 9P 9360 on an A9M9750 Devboard" - select PROCESSOR_NS9360 + select MODULE_CC9P9360 select BOARD_A9M9750DEV help Say Y here if you are using the Digi ConnectCore 9P 9360 @@ -12,21 +29,12 @@ config MACH_CC9P9360DEV config MACH_CC9P9360JS bool "ConnectCore 9P 9360 on a JSCC9P9360 Devboard" - select PROCESSOR_NS9360 + select MODULE_CC9P9360 select BOARD_JSCC9P9360 help Say Y here if you are using the Digi ConnectCore 9P 9360 on an JSCC9P9360 Development Board. -config PROCESSOR_NS9360 - bool - -config BOARD_A9M9750DEV - bool - -config BOARD_JSCC9P9360 - bool - endmenu endif diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile index 6fb82b855a55..41efaf9ad50b 100644 --- a/arch/arm/mach-ns9xxx/Makefile +++ b/arch/arm/mach-ns9xxx/Makefile @@ -1,7 +1,12 @@ -obj-y := irq.o time.o generic.o gpio.o +obj-y := clock.o generic.o gpio.o irq.o obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o +obj-$(CONFIG_PROCESSOR_NS9360) += gpio-ns9360.o processor-ns9360.o time-ns9360.o + obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o + +# platform devices +obj-$(CONFIG_NS9XXX_HAVE_SERIAL8250) += plat-serial8250.o diff --git a/arch/arm/mach-ns9xxx/Makefile.boot b/arch/arm/mach-ns9xxx/Makefile.boot index 75ed64e90fa4..54654919229b 100644 --- a/arch/arm/mach-ns9xxx/Makefile.boot +++ b/arch/arm/mach-ns9xxx/Makefile.boot @@ -1,2 +1,2 @@ -zreladdr-y := 0x108000 +zreladdr-y := 0x8000 params_phys-y := 0x100 diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 0f65177f9e5f..a494b71c0195 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -8,15 +8,14 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ -#include <linux/platform_device.h> -#include <linux/serial_8250.h> #include <linux/irq.h> #include <asm/mach/map.h> #include <asm/gpio.h> #include <asm/arch-ns9xxx/board.h> -#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> +#include <asm/arch-ns9xxx/regs-sys-ns9360.h> #include <asm/arch-ns9xxx/regs-mem.h> #include <asm/arch-ns9xxx/regs-bbu.h> #include <asm/arch-ns9xxx/regs-board-a9m9750dev.h> @@ -105,9 +104,9 @@ void __init board_a9m9750dev_init_irq(void) int i; if (gpio_request(11, "board a9m9750dev extirq2") == 0) - ns9xxx_gpio_configure(11, 0, 1); + ns9360_gpio_configure(11, 0, 1); else - printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_EXT2\n", + printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_NS9XXX_EXT2\n", __func__); for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) { @@ -116,69 +115,16 @@ void __init board_a9m9750dev_init_irq(void) set_irq_flags(i, IRQF_VALID); } - /* IRQ_EXT2: level sensitive + active low */ + /* IRQ_NS9XXX_EXT2: level sensitive + active low */ eic = __raw_readl(SYS_EIC(2)); REGSET(eic, SYS_EIC, PLTY, AL); REGSET(eic, SYS_EIC, LVEDG, LEVEL); __raw_writel(eic, SYS_EIC(2)); - set_irq_chained_handler(IRQ_EXT2, + set_irq_chained_handler(IRQ_NS9XXX_EXT2, a9m9750dev_fpga_demux_handler); } -static struct plat_serial8250_port board_a9m9750dev_serial8250_port[] = { - { - .iobase = FPGA_UARTA_BASE, - .membase = (unsigned char*)FPGA_UARTA_BASE, - .mapbase = FPGA_UARTA_BASE, - .irq = IRQ_FPGA_UARTA, - .iotype = UPIO_MEM, - .uartclk = 18432000, - .regshift = 0, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - }, { - .iobase = FPGA_UARTB_BASE, - .membase = (unsigned char*)FPGA_UARTB_BASE, - .mapbase = FPGA_UARTB_BASE, - .irq = IRQ_FPGA_UARTB, - .iotype = UPIO_MEM, - .uartclk = 18432000, - .regshift = 0, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - }, { - .iobase = FPGA_UARTC_BASE, - .membase = (unsigned char*)FPGA_UARTC_BASE, - .mapbase = FPGA_UARTC_BASE, - .irq = IRQ_FPGA_UARTC, - .iotype = UPIO_MEM, - .uartclk = 18432000, - .regshift = 0, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - }, { - .iobase = FPGA_UARTD_BASE, - .membase = (unsigned char*)FPGA_UARTD_BASE, - .mapbase = FPGA_UARTD_BASE, - .irq = IRQ_FPGA_UARTD, - .iotype = UPIO_MEM, - .uartclk = 18432000, - .regshift = 0, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - }, { - /* end marker */ - }, -}; - -static struct platform_device board_a9m9750dev_serial_device = { - .name = "serial8250", - .dev = { - .platform_data = board_a9m9750dev_serial8250_port, - }, -}; - -static struct platform_device *board_a9m9750dev_devices[] __initdata = { - &board_a9m9750dev_serial_device, -}; - void __init board_a9m9750dev_init_machine(void) { u32 reg; @@ -210,7 +156,4 @@ void __init board_a9m9750dev_init_machine(void) __raw_writel(0x2, MEM_SMOED(0)); __raw_writel(0x6, MEM_SMRD(0)); __raw_writel(0x6, MEM_SMWD(0)); - - platform_add_devices(board_a9m9750dev_devices, - ARRAY_SIZE(board_a9m9750dev_devices)); } diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c new file mode 100644 index 000000000000..f8639161068f --- /dev/null +++ b/arch/arm/mach-ns9xxx/clock.c @@ -0,0 +1,215 @@ +/* + * arch/arm/mach-ns9xxx/clock.c + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/err.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/clk.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <asm/semaphore.h> +#include "clock.h" + +static LIST_HEAD(clocks); +static DEFINE_SPINLOCK(clk_lock); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *ret = NULL, *retgen = NULL; + unsigned long flags; + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; + + spin_lock_irqsave(&clk_lock, flags); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0) { + if (p->id == idno) { + if (!try_module_get(p->owner)) + continue; + ret = p; + break; + } else if (p->id == -1) + /* remember match with id == -1 in case there is + * no clock for idno */ + retgen = p; + } + } + + if (!ret && retgen && try_module_get(retgen->owner)) + ret = retgen; + + if (ret) + ++ret->refcount; + + spin_unlock_irqrestore(&clk_lock, flags); + + return ret ? ret : ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); + --clk->refcount; +} +EXPORT_SYMBOL(clk_put); + +static int clk_enable_unlocked(struct clk *clk) +{ + int ret = 0; + if (clk->parent) { + ret = clk_enable_unlocked(clk->parent); + if (ret) + return ret; + } + + if (clk->usage++ == 0 && clk->endisable) + ret = clk->endisable(clk, 1); + + return ret; +} + +int clk_enable(struct clk *clk) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + + ret = clk_enable_unlocked(clk); + + spin_unlock_irqrestore(&clk_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +static void clk_disable_unlocked(struct clk *clk) +{ + if (--clk->usage == 0 && clk->endisable) + clk->endisable(clk, 0); + + if (clk->parent) + clk_disable_unlocked(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + + clk_disable_unlocked(clk); + + spin_unlock_irqrestore(&clk_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + if (clk->get_rate) + return clk->get_rate(clk); + + if (clk->rate) + return clk->rate; + + if (clk->parent) + return clk_get_rate(clk->parent); + + return 0; +} +EXPORT_SYMBOL(clk_get_rate); + +int clk_register(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + + list_add(&clk->node, &clocks); + + if (clk->parent) + ++clk->parent->refcount; + + spin_unlock_irqrestore(&clk_lock, flags); + + return 0; +} + +int clk_unregister(struct clk *clk) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + + if (clk->usage || clk->refcount) + ret = -EBUSY; + else + list_del(&clk->node); + + if (clk->parent) + --clk->parent->refcount; + + spin_unlock_irqrestore(&clk_lock, flags); + + return ret; +} + +#if defined CONFIG_DEBUG_FS + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static int clk_debugfs_show(struct seq_file *s, void *null) +{ + unsigned long flags; + struct clk *p; + + spin_lock_irqsave(&clk_lock, flags); + + list_for_each_entry(p, &clocks, node) + seq_printf(s, "%s.%d: usage=%lu refcount=%lu rate=%lu\n", + p->name, p->id, p->usage, p->refcount, + p->usage ? clk_get_rate(p) : 0); + + spin_unlock_irqrestore(&clk_lock, flags); + + return 0; +} + +static int clk_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_debugfs_show, NULL); +} + +static struct file_operations clk_debugfs_operations = { + .open = clk_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init clk_debugfs_init(void) +{ + struct dentry *dentry; + + dentry = debugfs_create_file("clk", S_IFREG | S_IRUGO, NULL, NULL, + &clk_debugfs_operations); + return IS_ERR(dentry) ? PTR_ERR(dentry) : 0; +} +subsys_initcall(clk_debugfs_init); + +#endif /* if defined CONFIG_DEBUG_FS */ diff --git a/arch/arm/mach-ns9xxx/clock.h b/arch/arm/mach-ns9xxx/clock.h new file mode 100644 index 000000000000..b86c30dd79eb --- /dev/null +++ b/arch/arm/mach-ns9xxx/clock.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-ns9xxx/clock.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __NS9XXX_CLOCK_H +#define __NS9XXX_CLOCK_H + +#include <linux/list.h> + +struct clk { + struct module *owner; + const char *name; + int id; + + struct clk *parent; + + unsigned long rate; + int (*endisable)(struct clk *, int enable); + unsigned long (*get_rate)(struct clk *); + + struct list_head node; + unsigned long refcount; + unsigned long usage; +}; + +int clk_register(struct clk *clk); +int clk_unregister(struct clk *clk); + +#endif /* ifndef __NS9XXX_CLOCK_H */ diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c index d742c921e34d..1e0f467879cc 100644 --- a/arch/arm/mach-ns9xxx/generic.c +++ b/arch/arm/mach-ns9xxx/generic.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/generic.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,34 +11,9 @@ #include <linux/kernel.h> #include <linux/init.h> #include <asm/memory.h> -#include <asm/page.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/arch-ns9xxx/regs-sys.h> -#include <asm/arch-ns9xxx/regs-mem.h> -#include <asm/arch-ns9xxx/board.h> #include "generic.h" -static struct map_desc standard_io_desc[] __initdata = { - { /* BBus */ - .virtual = io_p2v(0x90000000), - .pfn = __phys_to_pfn(0x90000000), - .length = 0x00700000, - .type = MT_DEVICE, - }, { /* AHB */ - .virtual = io_p2v(0xa0100000), - .pfn = __phys_to_pfn(0xa0100000), - .length = 0x00900000, - .type = MT_DEVICE, - }, -}; - -void __init ns9xxx_map_io(void) -{ - iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); -} - void __init ns9xxx_init_machine(void) { } diff --git a/arch/arm/mach-ns9xxx/generic.h b/arch/arm/mach-ns9xxx/generic.h index 687e291773f4..82493191aad6 100644 --- a/arch/arm/mach-ns9xxx/generic.h +++ b/arch/arm/mach-ns9xxx/generic.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/generic.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -13,7 +13,4 @@ #include <linux/init.h> void __init ns9xxx_init_irq(void); -void __init ns9xxx_map_io(void); void __init ns9xxx_init_machine(void); - -extern struct sys_timer ns9xxx_timer; diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c new file mode 100644 index 000000000000..cabfb879dda9 --- /dev/null +++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c @@ -0,0 +1,118 @@ +/* + * arch/arm/mach-ns9xxx/gpio-ns9360.c + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/bug.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <asm/arch-ns9xxx/regs-bbu.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> + +#include "gpio-ns9360.h" + +static inline int ns9360_valid_gpio(unsigned gpio) +{ + return gpio <= 72; +} + +static inline void __iomem *ns9360_gpio_get_gconfaddr(unsigned gpio) +{ + if (gpio < 56) + return BBU_GCONFb1(gpio / 8); + else + /* + * this could be optimised away on + * ns9750 only builds, but it isn't ... + */ + return BBU_GCONFb2((gpio - 56) / 8); +} + +static inline void __iomem *ns9360_gpio_get_gctrladdr(unsigned gpio) +{ + if (gpio < 32) + return BBU_GCTRL1; + else if (gpio < 64) + return BBU_GCTRL2; + else + /* this could be optimised away on ns9750 only builds */ + return BBU_GCTRL3; +} + +static inline void __iomem *ns9360_gpio_get_gstataddr(unsigned gpio) +{ + if (gpio < 32) + return BBU_GSTAT1; + else if (gpio < 64) + return BBU_GSTAT2; + else + /* this could be optimised away on ns9750 only builds */ + return BBU_GSTAT3; +} + +/* + * each gpio can serve for 4 different purposes [0..3]. These are called + * "functions" and passed in the parameter func. Functions 0-2 are always some + * special things, function 3 is GPIO. If func == 3 dir specifies input or + * output, and with inv you can enable an inverter (independent of func). + */ +int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func) +{ + void __iomem *conf = ns9360_gpio_get_gconfaddr(gpio); + u32 confval; + + confval = __raw_readl(conf); + REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir); + REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv); + REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func); + __raw_writel(confval, conf); + + return 0; +} + +int ns9360_gpio_configure(unsigned gpio, int inv, int func) +{ + if (likely(ns9360_valid_gpio(gpio))) { + if (func == 3) { + printk(KERN_WARNING "use gpio_direction_input " + "or gpio_direction_output\n"); + return -EINVAL; + } else + return __ns9360_gpio_configure(gpio, 0, inv, func); + } else + return -EINVAL; +} +EXPORT_SYMBOL(ns9360_gpio_configure); + +int ns9360_gpio_get_value(unsigned gpio) +{ + void __iomem *stat = ns9360_gpio_get_gstataddr(gpio); + int ret; + + ret = 1 & (__raw_readl(stat) >> (gpio & 31)); + + return ret; +} + +void ns9360_gpio_set_value(unsigned gpio, int value) +{ + void __iomem *ctrl = ns9360_gpio_get_gctrladdr(gpio); + u32 ctrlval; + + ctrlval = __raw_readl(ctrl); + + if (value) + ctrlval |= 1 << (gpio & 31); + else + ctrlval &= ~(1 << (gpio & 31)); + + __raw_writel(ctrlval, ctrl); +} diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.h b/arch/arm/mach-ns9xxx/gpio-ns9360.h new file mode 100644 index 000000000000..131cd1715caa --- /dev/null +++ b/arch/arm/mach-ns9xxx/gpio-ns9360.h @@ -0,0 +1,13 @@ +/* + * arch/arm/mach-ns9xxx/gpio-ns9360.h + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func); +int ns9360_gpio_get_value(unsigned gpio); +void ns9360_gpio_set_value(unsigned gpio, int value); diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c index 5286e9fc1d30..b3c963b0c8f5 100644 --- a/arch/arm/mach-ns9xxx/gpio.c +++ b/arch/arm/mach-ns9xxx/gpio.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/gpio.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -15,12 +15,13 @@ #include <asm/arch-ns9xxx/gpio.h> #include <asm/arch-ns9xxx/processor.h> -#include <asm/arch-ns9xxx/regs-bbu.h> -#include <asm/io.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> #include <asm/bug.h> #include <asm/types.h> #include <asm/bitops.h> +#include "gpio-ns9360.h" + #if defined(CONFIG_PROCESSOR_NS9360) #define GPIO_MAX 72 #elif defined(CONFIG_PROCESSOR_NS9750) @@ -45,41 +46,10 @@ static inline int ns9xxx_valid_gpio(unsigned gpio) return gpio <= 49; else #endif + { BUG(); -} - -static inline void __iomem *ns9xxx_gpio_get_gconfaddr(unsigned gpio) -{ - if (gpio < 56) - return BBU_GCONFb1(gpio / 8); - else - /* - * this could be optimised away on - * ns9750 only builds, but it isn't ... - */ - return BBU_GCONFb2((gpio - 56) / 8); -} - -static inline void __iomem *ns9xxx_gpio_get_gctrladdr(unsigned gpio) -{ - if (gpio < 32) - return BBU_GCTRL1; - else if (gpio < 64) - return BBU_GCTRL2; - else - /* this could be optimised away on ns9750 only builds */ - return BBU_GCTRL3; -} - -static inline void __iomem *ns9xxx_gpio_get_gstataddr(unsigned gpio) -{ - if (gpio < 32) - return BBU_GSTAT1; - else if (gpio < 64) - return BBU_GSTAT2; - else - /* this could be optimised away on ns9750 only builds */ - return BBU_GSTAT3; + return 0; + } } int gpio_request(unsigned gpio, const char *label) @@ -98,49 +68,24 @@ void gpio_free(unsigned gpio) } EXPORT_SYMBOL(gpio_free); -/* - * each gpio can serve for 4 different purposes [0..3]. These are called - * "functions" and passed in the parameter func. Functions 0-2 are always some - * special things, function 3 is GPIO. If func == 3 dir specifies input or - * output, and with inv you can enable an inverter (independent of func). - */ -static int __ns9xxx_gpio_configure(unsigned gpio, int dir, int inv, int func) +int gpio_direction_input(unsigned gpio) { - void __iomem *conf = ns9xxx_gpio_get_gconfaddr(gpio); - u32 confval; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - confval = __raw_readl(conf); - REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir); - REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv); - REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func); - __raw_writel(confval, conf); + if (likely(ns9xxx_valid_gpio(gpio))) { + int ret = -EINVAL; + unsigned long flags; - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&gpio_lock, flags); +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + ret = __ns9360_gpio_configure(gpio, 0, 0, 3); + else +#endif + BUG(); - return 0; -} + spin_unlock_irqrestore(&gpio_lock, flags); -int ns9xxx_gpio_configure(unsigned gpio, int inv, int func) -{ - if (likely(ns9xxx_valid_gpio(gpio))) { - if (func == 3) { - printk(KERN_WARNING "use gpio_direction_input " - "or gpio_direction_output\n"); - return -EINVAL; - } else - return __ns9xxx_gpio_configure(gpio, 0, inv, func); - } else - return -EINVAL; -} -EXPORT_SYMBOL(ns9xxx_gpio_configure); + return ret; -int gpio_direction_input(unsigned gpio) -{ - if (likely(ns9xxx_valid_gpio(gpio))) { - return __ns9xxx_gpio_configure(gpio, 0, 0, 3); } else return -EINVAL; } @@ -149,9 +94,22 @@ EXPORT_SYMBOL(gpio_direction_input); int gpio_direction_output(unsigned gpio, int value) { if (likely(ns9xxx_valid_gpio(gpio))) { + int ret = -EINVAL; + unsigned long flags; + gpio_set_value(gpio, value); - return __ns9xxx_gpio_configure(gpio, 1, 0, 3); + spin_lock_irqsave(&gpio_lock, flags); +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + ret = __ns9360_gpio_configure(gpio, 1, 0, 3); + else +#endif + BUG(); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return ret; } else return -EINVAL; } @@ -159,31 +117,28 @@ EXPORT_SYMBOL(gpio_direction_output); int gpio_get_value(unsigned gpio) { - void __iomem *stat = ns9xxx_gpio_get_gstataddr(gpio); - int ret; - - ret = 1 & (__raw_readl(stat) >> (gpio & 31)); - - return ret; +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + return ns9360_gpio_get_value(gpio); + else +#endif + { + BUG(); + return -EINVAL; + } } EXPORT_SYMBOL(gpio_get_value); void gpio_set_value(unsigned gpio, int value) { - void __iomem *ctrl = ns9xxx_gpio_get_gctrladdr(gpio); - u32 ctrlval; unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - - ctrlval = __raw_readl(ctrl); - - if (value) - ctrlval |= 1 << (gpio & 31); +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + ns9360_gpio_set_value(gpio, value); else - ctrlval &= ~(1 << (gpio & 31)); - - __raw_writel(ctrlval, ctrl); +#endif + BUG(); spin_unlock_irqrestore(&gpio_lock, flags); } diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index 00001b874e97..ca85d24cf39f 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -9,21 +9,27 @@ * the Free Software Foundation. */ #include <linux/interrupt.h> +#include <linux/kernel_stat.h> #include <asm/io.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> -#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/regs-sys-common.h> #include <asm/arch-ns9xxx/irqs.h> #include <asm/arch-ns9xxx/board.h> #include "generic.h" +/* simple interrupt prio table: prio(x) < prio(y) <=> x < y */ +#define irq2prio(i) (i) +#define prio2irq(p) (p) + static void ns9xxx_mask_irq(unsigned int irq) { /* XXX: better use cpp symbols */ - u32 ic = __raw_readl(SYS_IC(irq / 4)); - ic &= ~(1 << (7 + 8 * (3 - (irq & 3)))); - __raw_writel(ic, SYS_IC(irq / 4)); + int prio = irq2prio(irq); + u32 ic = __raw_readl(SYS_IC(prio / 4)); + ic &= ~(1 << (7 + 8 * (3 - (prio & 3)))); + __raw_writel(ic, SYS_IC(prio / 4)); } static void ns9xxx_ack_irq(unsigned int irq) @@ -40,9 +46,10 @@ static void ns9xxx_maskack_irq(unsigned int irq) static void ns9xxx_unmask_irq(unsigned int irq) { /* XXX: better use cpp symbols */ - u32 ic = __raw_readl(SYS_IC(irq / 4)); - ic |= 1 << (7 + 8 * (3 - (irq & 3))); - __raw_writel(ic, SYS_IC(irq / 4)); + int prio = irq2prio(irq); + u32 ic = __raw_readl(SYS_IC(prio / 4)); + ic |= 1 << (7 + 8 * (3 - (prio & 3))); + __raw_writel(ic, SYS_IC(prio / 4)); } static struct irq_chip ns9xxx_chip = { @@ -52,24 +59,69 @@ static struct irq_chip ns9xxx_chip = { .unmask = ns9xxx_unmask_irq, }; +#if 0 +#define handle_irq handle_level_irq +#else +static void handle_prio_irq(unsigned int irq, struct irq_desc *desc) +{ + unsigned int cpu = smp_processor_id(); + struct irqaction *action; + irqreturn_t action_ret; + + spin_lock(&desc->lock); + + BUG_ON(desc->status & IRQ_INPROGRESS); + + desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); + kstat_cpu(cpu).irqs[irq]++; + + action = desc->action; + if (unlikely(!action || (desc->status & IRQ_DISABLED))) + goto out_mask; + + desc->status |= IRQ_INPROGRESS; + spin_unlock(&desc->lock); + + action_ret = handle_IRQ_event(irq, action); + + /* XXX: There is no direct way to access noirqdebug, so check + * unconditionally for spurious irqs... + * Maybe this function should go to kernel/irq/chip.c? */ + note_interrupt(irq, desc, action_ret); + + spin_lock(&desc->lock); + desc->status &= ~IRQ_INPROGRESS; + + if (desc->status & IRQ_DISABLED) +out_mask: + desc->chip->mask(irq); + + /* ack unconditionally to unmask lower prio irqs */ + desc->chip->ack(irq); + + spin_unlock(&desc->lock); +} +#define handle_irq handle_prio_irq +#endif + void __init ns9xxx_init_irq(void) { int i; /* disable all IRQs */ for (i = 0; i < 8; ++i) - __raw_writel((4 * i) << 24 | (4 * i + 1) << 16 | - (4 * i + 2) << 8 | (4 * i + 3), SYS_IC(i)); + __raw_writel(prio2irq(4 * i) << 24 | + prio2irq(4 * i + 1) << 16 | + prio2irq(4 * i + 2) << 8 | + prio2irq(4 * i + 3), + SYS_IC(i)); - /* simple interrupt prio table: - * prio(x) < prio(y) <=> x < y - */ for (i = 0; i < 32; ++i) - __raw_writel(i, SYS_IVA(i)); + __raw_writel(prio2irq(i), SYS_IVA(i)); - for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) { + for (i = 0; i <= 31; ++i) { set_irq_chip(i, &ns9xxx_chip); - set_irq_handler(i, handle_level_irq); + set_irq_handler(i, handle_irq); set_irq_flags(i, IRQF_VALID); } } diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c index 760c9d0db7c3..9623fff6b3bc 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,12 +11,14 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> + #include "board-a9m9750dev.h" #include "generic.h" static void __init mach_cc9p9360dev_map_io(void) { - ns9xxx_map_io(); + ns9360_map_io(); board_a9m9750dev_map_io(); } @@ -36,6 +38,6 @@ MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an A9M9750 Devboard") .map_io = mach_cc9p9360dev_map_io, .init_irq = mach_cc9p9360dev_init_irq, .init_machine = mach_cc9p9360dev_init_machine, - .timer = &ns9xxx_timer, + .timer = &ns9360_timer, .boot_params = 0x100, MACHINE_END diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c index 85c8b41105c9..fcc815bdd291 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/mach-cc9p9360js.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,6 +11,8 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> + #include "board-jscc9p9360.h" #include "generic.h" @@ -21,9 +23,9 @@ static void __init mach_cc9p9360js_init_machine(void) } MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard") - .map_io = ns9xxx_map_io, + .map_io = ns9360_map_io, .init_irq = ns9xxx_init_irq, .init_machine = mach_cc9p9360js_init_machine, - .timer = &ns9xxx_timer, + .timer = &ns9360_timer, .boot_params = 0x100, MACHINE_END diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c new file mode 100644 index 000000000000..5aa5d9baf8c8 --- /dev/null +++ b/arch/arm/mach-ns9xxx/plat-serial8250.c @@ -0,0 +1,69 @@ +/* + * arch/arm/mach-ns9xxx/plat-serial8250.c + * + * Copyright (C) 2008 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/platform_device.h> +#include <linux/serial_8250.h> + +#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h> +#include <asm/arch-ns9xxx/board.h> + +#define DRIVER_NAME "serial8250" + +static int __init ns9xxx_plat_serial8250_init(void) +{ + struct plat_serial8250_port *pdata; + struct platform_device *pdev; + int ret = -ENOMEM; + int i; + + if (!board_is_a9m9750dev()) + return -ENODEV; + + pdev = platform_device_alloc(DRIVER_NAME, 0); + if (!pdev) + goto err; + + pdata = kzalloc(5 * sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto err; + + pdev->dev.platform_data = pdata; + + pdata[0].iobase = FPGA_UARTA_BASE; + pdata[1].iobase = FPGA_UARTB_BASE; + pdata[2].iobase = FPGA_UARTC_BASE; + pdata[3].iobase = FPGA_UARTD_BASE; + + for (i = 0; i < 4; ++i) { + pdata[i].membase = (void __iomem *)pdata[i].iobase; + pdata[i].mapbase = pdata[i].iobase; + pdata[i].iotype = UPIO_MEM; + pdata[i].uartclk = 18432000; + pdata[i].flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + } + + pdata[0].irq = IRQ_FPGA_UARTA; + pdata[1].irq = IRQ_FPGA_UARTB; + pdata[2].irq = IRQ_FPGA_UARTC; + pdata[3].irq = IRQ_FPGA_UARTD; + + ret = platform_device_add(pdev); + if (ret) { +err: + platform_device_put(pdev); + + printk(KERN_WARNING "Could not add %s (errno=%d)\n", + DRIVER_NAME, ret); + } + + return 0; +} + +arch_initcall(ns9xxx_plat_serial8250_init); diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c new file mode 100644 index 000000000000..2bee0b7fccbb --- /dev/null +++ b/arch/arm/mach-ns9xxx/processor-ns9360.c @@ -0,0 +1,54 @@ +/* + * arch/arm/mach-ns9xxx/processor-ns9360.c + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/slab.h> + +#include <asm/page.h> +#include <asm/mach/map.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> +#include <asm/arch-ns9xxx/regs-sys-ns9360.h> + +void ns9360_reset(char mode) +{ + u32 reg; + + reg = __raw_readl(SYS_PLL) >> 16; + REGSET(reg, SYS_PLL, SWC, YES); + __raw_writel(reg, SYS_PLL); +} + +#define CRYSTAL 29491200 /* Hz */ +unsigned long ns9360_systemclock(void) +{ + u32 pll = __raw_readl(SYS_PLL); + return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1) + >> REGGETIM(pll, SYS_PLL, FS); +} + +static struct map_desc ns9360_io_desc[] __initdata = { + { /* BBus */ + .virtual = io_p2v(0x90000000), + .pfn = __phys_to_pfn(0x90000000), + .length = 0x00700000, + .type = MT_DEVICE, + }, { /* AHB */ + .virtual = io_p2v(0xa0100000), + .pfn = __phys_to_pfn(0xa0100000), + .length = 0x00900000, + .type = MT_DEVICE, + }, +}; + +void __init ns9360_map_io(void) +{ + iotable_init(ns9360_io_desc, ARRAY_SIZE(ns9360_io_desc)); +} diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time-ns9360.c index c3dd1f4acb99..4d573c9793ed 100644 --- a/arch/arm/mach-ns9xxx/time.c +++ b/arch/arm/mach-ns9xxx/time-ns9360.c @@ -1,7 +1,7 @@ /* - * arch/arm/mach-ns9xxx/time.c + * arch/arm/mach-ns9xxx/time-ns9360.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -15,8 +15,8 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> -#include <asm/arch-ns9xxx/regs-sys.h> -#include <asm/arch-ns9xxx/clock.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> +#include <asm/arch-ns9xxx/regs-sys-ns9360.h> #include <asm/arch-ns9xxx/irqs.h> #include <asm/arch/system.h> #include "generic.h" @@ -25,26 +25,26 @@ #define TIMER_CLOCKEVENT 1 static u32 latch; -static cycle_t ns9xxx_clocksource_read(void) +static cycle_t ns9360_clocksource_read(void) { return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE)); } -static struct clocksource ns9xxx_clocksource = { - .name = "ns9xxx-timer" __stringify(TIMER_CLOCKSOURCE), +static struct clocksource ns9360_clocksource = { + .name = "ns9360-timer" __stringify(TIMER_CLOCKSOURCE), .rating = 300, - .read = ns9xxx_clocksource_read, + .read = ns9360_clocksource_read, .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void ns9xxx_clockevent_setmode(enum clock_event_mode mode, +static void ns9360_clockevent_setmode(enum clock_event_mode mode, struct clock_event_device *clk) { u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); - switch(mode) { + switch (mode) { case CLOCK_EVT_MODE_PERIODIC: __raw_writel(latch, SYS_TRC(TIMER_CLOCKEVENT)); REGSET(tc, SYS_TCx, REN, EN); @@ -69,7 +69,7 @@ static void ns9xxx_clockevent_setmode(enum clock_event_mode mode, __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); } -static int ns9xxx_clockevent_setnextevent(unsigned long evt, +static int ns9360_clockevent_setnextevent(unsigned long evt, struct clock_event_device *clk) { u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); @@ -88,20 +88,20 @@ static int ns9xxx_clockevent_setnextevent(unsigned long evt, return 0; } -static struct clock_event_device ns9xxx_clockevent_device = { - .name = "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT), +static struct clock_event_device ns9360_clockevent_device = { + .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT), .shift = 20, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = ns9xxx_clockevent_setmode, - .set_next_event = ns9xxx_clockevent_setnextevent, + .set_mode = ns9360_clockevent_setmode, + .set_next_event = ns9360_clockevent_setnextevent, }; -static irqreturn_t ns9xxx_clockevent_handler(int irq, void *dev_id) +static irqreturn_t ns9360_clockevent_handler(int irq, void *dev_id) { - int timerno = irq - IRQ_TIMER0; + int timerno = irq - IRQ_NS9360_TIMER0; u32 tc; - struct clock_event_device *evt = &ns9xxx_clockevent_device; + struct clock_event_device *evt = &ns9360_clockevent_device; /* clear irq */ tc = __raw_readl(SYS_TC(timerno)); @@ -119,13 +119,13 @@ static irqreturn_t ns9xxx_clockevent_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction ns9xxx_clockevent_action = { - .name = "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT), +static struct irqaction ns9360_clockevent_action = { + .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT), .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = ns9xxx_clockevent_handler, + .handler = ns9360_clockevent_handler, }; -static void __init ns9xxx_timer_init(void) +static void __init ns9360_timer_init(void) { int tc; @@ -148,12 +148,12 @@ static void __init ns9xxx_timer_init(void) __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE)); - ns9xxx_clocksource.mult = clocksource_hz2mult(ns9xxx_cpuclock(), - ns9xxx_clocksource.shift); + ns9360_clocksource.mult = clocksource_hz2mult(ns9360_cpuclock(), + ns9360_clocksource.shift); - clocksource_register(&ns9xxx_clocksource); + clocksource_register(&ns9360_clocksource); - latch = SH_DIV(ns9xxx_cpuclock(), HZ, 0); + latch = SH_DIV(ns9360_cpuclock(), HZ, 0); tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); REGSET(tc, SYS_TCx, TEN, DIS); @@ -166,19 +166,20 @@ static void __init ns9xxx_timer_init(void) REGSET(tc, SYS_TCx, REN, EN); __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); - ns9xxx_clockevent_device.mult = div_sc(ns9xxx_cpuclock(), - NSEC_PER_SEC, ns9xxx_clockevent_device.shift); - ns9xxx_clockevent_device.max_delta_ns = - clockevent_delta2ns(-1, &ns9xxx_clockevent_device); - ns9xxx_clockevent_device.min_delta_ns = - clockevent_delta2ns(1, &ns9xxx_clockevent_device); + ns9360_clockevent_device.mult = div_sc(ns9360_cpuclock(), + NSEC_PER_SEC, ns9360_clockevent_device.shift); + ns9360_clockevent_device.max_delta_ns = + clockevent_delta2ns(-1, &ns9360_clockevent_device); + ns9360_clockevent_device.min_delta_ns = + clockevent_delta2ns(1, &ns9360_clockevent_device); - ns9xxx_clockevent_device.cpumask = cpumask_of_cpu(0); - clockevents_register_device(&ns9xxx_clockevent_device); + ns9360_clockevent_device.cpumask = cpumask_of_cpu(0); + clockevents_register_device(&ns9360_clockevent_device); - setup_irq(IRQ_TIMER0 + TIMER_CLOCKEVENT, &ns9xxx_clockevent_action); + setup_irq(IRQ_NS9360_TIMER0 + TIMER_CLOCKEVENT, + &ns9360_clockevent_action); } -struct sys_timer ns9xxx_timer = { - .init = ns9xxx_timer_init, +struct sys_timer ns9360_timer = { + .init = ns9360_timer_init, }; diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 015a66b3ca8e..c06f5254c0f3 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -5,7 +5,8 @@ # Common support obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o -obj-$(CONFIG_OMAP_MPU_TIMER) += time.o +obj-$(CONFIG_OMAP_MPU_TIMER) += time.o +obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management obj-$(CONFIG_PM) += pm.o sleep.o diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 507987720015..4b444fdaafea 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -351,11 +351,9 @@ static void __init h2_init_smc91x(void) static struct i2c_board_info __initdata h2_i2c_board_info[] = { { I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65010", .irq = OMAP_GPIO_IRQ(58), }, { I2C_BOARD_INFO("isp1301_omap", 0x2d), - .type = "isp1301_omap", .irq = OMAP_GPIO_IRQ(2), }, }; diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index c3ef1ee5f77b..7fbaa8d648cd 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -473,8 +473,7 @@ static struct omap_board_config_kernel h3_config[] __initdata = { static struct i2c_board_info __initdata h3_i2c_board_info[] = { { - I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65013", + I2C_BOARD_INFO("tps65013", 0x48), /* .irq = OMAP_GPIO_IRQ(??), */ }, }; diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 5279e35a8aec..a66505f58b15 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/i2c.h> +#include <linux/leds.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -183,11 +184,79 @@ static struct platform_device *osk5912_devices[] __initdata = { &osk5912_mcbsp1_device, }; +static struct gpio_led tps_leds[] = { + /* NOTE: D9 and D2 have hardware blink support. + * Also, D9 requires non-battery power. + */ + { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", }, + { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", }, + { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1, + .default_trigger = "heartbeat", }, +}; + +static struct gpio_led_platform_data tps_leds_data = { + .num_leds = 3, + .leds = tps_leds, +}; + +static struct platform_device osk5912_tps_leds = { + .name = "leds-gpio", + .id = 0, + .dev.platform_data = &tps_leds_data, +}; + +static int osk_tps_setup(struct i2c_client *client, void *context) +{ + /* Set GPIO 1 HIGH to disable VBUS power supply; + * OHCI driver powers it up/down as needed. + */ + gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en"); + gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1); + + /* Set GPIO 2 high so LED D3 is off by default */ + tps65010_set_gpio_out_value(GPIO2, HIGH); + + /* Set GPIO 3 low to take ethernet out of reset */ + gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset"); + gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0); + + /* GPIO4 is VDD_DSP */ + gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power"); + gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1); + /* REVISIT if DSP support isn't configured, power it off ... */ + + /* Let LED1 (D9) blink; leds-gpio may override it */ + tps65010_set_led(LED1, BLINK); + + /* Set LED2 off by default */ + tps65010_set_led(LED2, OFF); + + /* Enable LOW_PWR handshake */ + tps65010_set_low_pwr(ON); + + /* Switch VLDO2 to 3.0V for AIC23 */ + tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V + | TPS_LDO1_ENABLE); + + /* register these three LEDs */ + osk5912_tps_leds.dev.parent = &client->dev; + platform_device_register(&osk5912_tps_leds); + + return 0; +} + +static struct tps65010_board tps_board = { + .base = OSK_TPS_GPIO_BASE, + .outmask = 0x0f, + .setup = osk_tps_setup, +}; + static struct i2c_board_info __initdata osk_i2c_board_info[] = { { I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65010", .irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)), + .platform_data = &tps_board, + }, /* TODO when driver support is ready: * - aic23 audio chip at 0x1a @@ -198,7 +267,7 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = { static void __init osk_init_smc91x(void) { - if ((omap_request_gpio(0)) < 0) { + if ((gpio_request(0, "smc_irq")) < 0) { printk("Error requesting gpio 0 for smc91x irq\n"); return; } @@ -210,7 +279,7 @@ static void __init osk_init_smc91x(void) static void __init osk_init_cf(void) { omap_cfg_reg(M7_1610_GPIO62); - if ((omap_request_gpio(62)) < 0) { + if ((gpio_request(62, "cf_irq")) < 0) { printk("Error requesting gpio 62 for CF irq\n"); return; } @@ -334,7 +403,7 @@ static struct platform_device *mistral_devices[] __initdata = { static int mistral_get_pendown_state(void) { - return !omap_get_gpio_datain(4); + return !gpio_get_value(4); } static const struct ads7846_platform_data mistral_ts_info = { @@ -396,25 +465,31 @@ static void __init osk_mistral_init(void) omap_cfg_reg(W14_1610_CCP_DATAP); /* CAM_PWDN */ - if (omap_request_gpio(11) == 0) { + if (gpio_request(11, "cam_pwdn") == 0) { omap_cfg_reg(N20_1610_GPIO11); - omap_set_gpio_direction(11, 0 /* out */); - omap_set_gpio_dataout(11, 0 /* off */); + gpio_direction_output(11, 0); } else pr_debug("OSK+Mistral: CAM_PWDN is awol\n"); /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */ + gpio_request(6, "ts_busy"); + gpio_direction_input(6); + omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ + gpio_request(4, "ts_int"); + gpio_direction_input(4); set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); + spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); /* the sideways button (SW1) is for use as a "wakeup" button */ omap_cfg_reg(N15_1610_MPUIO2); - if (omap_request_gpio(OMAP_MPUIO(2)) == 0) { + if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) { int ret = 0; - omap_set_gpio_direction(OMAP_MPUIO(2), 1); + + gpio_direction_input(OMAP_MPUIO(2)); set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); #ifdef CONFIG_PM /* share the IRQ in case someone wants to use the @@ -425,7 +500,7 @@ static void __init osk_mistral_init(void) IRQF_SHARED, "mistral_wakeup", &osk_mistral_wake_interrupt); if (ret != 0) { - omap_free_gpio(OMAP_MPUIO(2)); + gpio_free(OMAP_MPUIO(2)); printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", ret); } else @@ -438,10 +513,8 @@ static void __init osk_mistral_init(void) * board, like the touchscreen, EEPROM, and wakeup (!) switch. */ omap_cfg_reg(PWL); - if (omap_request_gpio(2) == 0) { - omap_set_gpio_direction(2, 0 /* out */); - omap_set_gpio_dataout(2, 1 /* on */); - } + if (gpio_request(2, "lcd_pwr") == 0) + gpio_direction_output(2, 1); platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices)); } @@ -484,44 +557,6 @@ static void __init osk_map_io(void) omap1_map_common_io(); } -#ifdef CONFIG_TPS65010 -static int __init osk_tps_init(void) -{ - if (!machine_is_omap_osk()) - return 0; - - /* Let LED1 (D9) blink */ - tps65010_set_led(LED1, BLINK); - - /* Disable LED 2 (D2) */ - tps65010_set_led(LED2, OFF); - - /* Set GPIO 1 HIGH to disable VBUS power supply; - * OHCI driver powers it up/down as needed. - */ - tps65010_set_gpio_out_value(GPIO1, HIGH); - - /* Set GPIO 2 low to turn on LED D3 */ - tps65010_set_gpio_out_value(GPIO2, HIGH); - - /* Set GPIO 3 low to take ethernet out of reset */ - tps65010_set_gpio_out_value(GPIO3, LOW); - - /* gpio4 for VDD_DSP */ - /* FIXME send power to DSP iff it's configured */ - - /* Enable LOW_PWR */ - tps65010_set_low_pwr(ON); - - /* Switch VLDO2 to 3.0V for AIC23 */ - tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V - | TPS_LDO1_ENABLE); - - return 0; -} -fs_initcall(osk_tps_init); -#endif - MACHINE_START(OMAP_OSK, "TI-OSK") /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ .phys_io = 0xfff00000, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index ca1a4bf78a10..a4d20127a60e 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -24,7 +24,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> -#include <linux/spi/tsc2102.h> #include <linux/interrupt.h> #include <linux/apm-emulation.h> @@ -63,7 +62,7 @@ static const int palmte_keymap[] = { KEY(1, 1, KEY_DOWN), KEY(1, 2, KEY_UP), KEY(1, 3, KEY_RIGHT), - KEY(1, 4, KEY_CENTER), + KEY(1, 4, KEY_ENTER), 0, }; @@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery) #define palmte_get_power_status NULL #endif -static struct tsc2102_config palmte_tsc2102_config = { - .use_internal = 0, - .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP, - .temp_at25c = { 2200, 2615 }, - .apm_report = palmte_get_power_status, - .alsa_config = &palmte_alsa_config, -}; - static struct omap_board_config_kernel palmte_config[] __initdata = { { OMAP_TAG_USB, &palmte_usb_config }, { OMAP_TAG_MMC, &palmte_mmc_config }, @@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = { .bus_num = 2, /* uWire (officially) */ .chip_select = 0, /* As opposed to 3 */ .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO), - .platform_data = &palmte_tsc2102_config, .max_speed_hz = 8000000, }, }; diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 156510777ffe..e020c2774606 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -65,7 +65,7 @@ static int palmz71_keymap[] = { KEY(1, 1, KEY_DOWN), KEY(1, 2, KEY_UP), KEY(1, 3, KEY_RIGHT), - KEY(1, 4, KEY_CENTER), + KEY(1, 4, KEY_ENTER), KEY(2, 0, KEY_CAMERA), 0, }; diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 026685ed461a..754383dde807 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -1,11 +1,9 @@ /* * linux/arch/arm/mach-omap1/leds-osk.c * - * LED driver for OSK, and optionally Mistral QVGA, boards + * LED driver for OSK with optional Mistral QVGA board */ #include <linux/init.h> -#include <linux/workqueue.h> -#include <linux/i2c/tps65010.h> #include <asm/hardware.h> #include <asm/leds.h> @@ -20,49 +18,11 @@ #define LED_STATE_CLAIMED (1 << 1) static u8 led_state; -#define GREEN_LED (1 << 0) /* TPS65010 LED1 */ -#define AMBER_LED (1 << 1) /* TPS65010 LED2 */ -#define RED_LED (1 << 2) /* TPS65010 GPIO2 */ #define TIMER_LED (1 << 3) /* Mistral board */ #define IDLE_LED (1 << 4) /* Mistral board */ static u8 hw_led_state; -/* TPS65010 leds are changed using i2c -- from a task context. - * Using one of these for the "idle" LED would be impractical... - */ -#define TPS_LEDS (GREEN_LED | RED_LED | AMBER_LED) - -static u8 tps_leds_change; - -static void tps_work(struct work_struct *unused) -{ - for (;;) { - u8 leds; - - local_irq_disable(); - leds = tps_leds_change; - tps_leds_change = 0; - local_irq_enable(); - - if (!leds) - break; - - /* careful: the set_led() value is on/off/blink */ - if (leds & GREEN_LED) - tps65010_set_led(LED1, !!(hw_led_state & GREEN_LED)); - if (leds & AMBER_LED) - tps65010_set_led(LED2, !!(hw_led_state & AMBER_LED)); - - /* the gpio led doesn't have that issue */ - if (leds & RED_LED) - tps65010_set_gpio_out_value(GPIO2, - !(hw_led_state & RED_LED)); - } -} - -static DECLARE_WORK(work, tps_work); - #ifdef CONFIG_OMAP_OSK_MISTRAL /* For now, all system indicators require the Mistral board, since that @@ -112,7 +72,6 @@ void osk_leds_event(led_event_t evt) case led_stop: led_state &= ~LED_STATE_ENABLED; hw_led_state = 0; - /* NOTE: work may still be pending!! */ break; case led_claim: @@ -145,48 +104,11 @@ void osk_leds_event(led_event_t evt) #endif /* CONFIG_OMAP_OSK_MISTRAL */ - /* "green" == tps LED1 (leftmost, normally power-good) - * works only with DC adapter, not on battery power! - */ - case led_green_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= GREEN_LED; - break; - case led_green_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~GREEN_LED; - break; - - /* "amber" == tps LED2 (middle) */ - case led_amber_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= AMBER_LED; - break; - case led_amber_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~AMBER_LED; - break; - - /* "red" == LED on tps gpio3 (rightmost) */ - case led_red_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= RED_LED; - break; - case led_red_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~RED_LED; - break; - default: break; } leds ^= hw_led_state; - leds &= TPS_LEDS; - if (leds && (led_state & LED_STATE_CLAIMED)) { - tps_leds_change |= leds; - schedule_work(&work); - } done: local_irq_restore(flags); diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 52c70e5fcf65..e207bf7cb853 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -3,9 +3,9 @@ * * OMAP1 pin multiplexing configurations * - * Copyright (C) 2003 - 2005 Nokia Corporation + * Copyright (C) 2003 - 2008 Nokia Corporation * - * Written by Tony Lindgren <tony.lindgren@nokia.com> + * Written by Tony Lindgren * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,8 +32,10 @@ #ifdef CONFIG_OMAP_MUX +static struct omap_mux_cfg arch_mux_cfg; + #ifdef CONFIG_ARCH_OMAP730 -struct pin_config __initdata_or_module omap730_pins[] = { +static struct pin_config __initdata_or_module omap730_pins[] = { MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0) @@ -49,10 +51,14 @@ MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0) MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0) MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) }; -#endif +#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins) +#else +#define omap730_pins NULL +#define OMAP730_PINS_SZ 0 +#endif /* CONFIG_ARCH_OMAP730 */ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) -struct pin_config __initdata_or_module omap1xxx_pins[] = { +static struct pin_config __initdata_or_module omap1xxx_pins[] = { /* * description mux mode mux pull pull pull pu_pd pu dbg * reg offset mode reg bit ena reg @@ -306,22 +312,136 @@ MUX_CFG("Y12_1610_CCP_CLKP", 8, 18, 6, 1, 24, 1, 1, 0, 0) MUX_CFG("W13_1610_CCP_CLKM", 9, 0, 6, 1, 28, 1, 1, 0, 0) MUX_CFG("W14_1610_CCP_DATAP", 9, 24, 6, 2, 4, 1, 2, 0, 0) MUX_CFG("Y14_1610_CCP_DATAM", 9, 21, 6, 2, 3, 1, 2, 0, 0) - }; +#define OMAP1XXX_PINS_SZ ARRAY_SIZE(omap1xxx_pins) +#else +#define omap1xxx_pins NULL +#define OMAP1XXX_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */ -int __init omap1_mux_init(void) +int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) { - -#ifdef CONFIG_ARCH_OMAP730 - omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins)); + static DEFINE_SPINLOCK(mux_spin_lock); + unsigned long flags; + unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0, + pull_orig = 0, pull = 0; + unsigned int mask, warn = 0; + + /* Check the mux register in question */ + if (cfg->mux_reg) { + unsigned tmp1, tmp2; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg_orig = omap_readl(cfg->mux_reg); + + /* The mux registers always seem to be 3 bits long */ + mask = (0x7 << cfg->mask_offset); + tmp1 = reg_orig & mask; + reg = reg_orig & ~mask; + + tmp2 = (cfg->mask << cfg->mask_offset); + reg |= tmp2; + + if (tmp1 != tmp2) + warn = 1; + + omap_writel(reg, cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + /* Check for pull up or pull down selection on 1610 */ + if (!cpu_is_omap15xx()) { + if (cfg->pu_pd_reg && cfg->pull_val) { + spin_lock_irqsave(&mux_spin_lock, flags); + pu_pd_orig = omap_readl(cfg->pu_pd_reg); + mask = 1 << cfg->pull_bit; + + if (cfg->pu_pd_val) { + if (!(pu_pd_orig & mask)) + warn = 1; + /* Use pull up */ + pu_pd = pu_pd_orig | mask; + } else { + if (pu_pd_orig & mask) + warn = 1; + /* Use pull down */ + pu_pd = pu_pd_orig & ~mask; + } + omap_writel(pu_pd, cfg->pu_pd_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + } + + /* Check for an associated pull down register */ + if (cfg->pull_reg) { + spin_lock_irqsave(&mux_spin_lock, flags); + pull_orig = omap_readl(cfg->pull_reg); + mask = 1 << cfg->pull_bit; + + if (cfg->pull_val) { + if (pull_orig & mask) + warn = 1; + /* Low bit = pull enabled */ + pull = pull_orig & ~mask; + } else { + if (!(pull_orig & mask)) + warn = 1; + /* High bit = pull disabled */ + pull = pull_orig | mask; + } + + omap_writel(pull, cfg->pull_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + if (warn) { +#ifdef CONFIG_OMAP_MUX_WARNINGS + printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); #endif - -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) - omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins)); + } + +#ifdef CONFIG_OMAP_MUX_DEBUG + if (cfg->debug || warn) { + printk("MUX: Setting register %s\n", cfg->name); + printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); + + if (!cpu_is_omap15xx()) { + if (cfg->pu_pd_reg && cfg->pull_val) { + printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->pu_pd_name, cfg->pu_pd_reg, + pu_pd_orig, pu_pd); + } + } + + if (cfg->pull_reg) + printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->pull_name, cfg->pull_reg, pull_orig, pull); + } #endif +#ifdef CONFIG_OMAP_MUX_ERRORS + return warn ? -ETXTBSY : 0; +#else return 0; +#endif +} + +int __init omap1_mux_init(void) +{ + if (cpu_is_omap730()) { + arch_mux_cfg.pins = omap730_pins; + arch_mux_cfg.size = OMAP730_PINS_SZ; + arch_mux_cfg.cfg_reg = omap1_cfg_reg; + } + + if (cpu_is_omap15xx() || cpu_is_omap16xx()) { + arch_mux_cfg.pins = omap1xxx_pins; + arch_mux_cfg.size = OMAP1XXX_PINS_SZ; + arch_mux_cfg.cfg_reg = omap1_cfg_reg; + } + + return omap_mux_register(&arch_mux_cfg); } #endif diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index a4f8b2055437..5d2b270935a2 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -56,37 +56,6 @@ #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 -/* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c, - * converted to use kHz by Kevin Hilman */ -/* convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george at mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * -johnstul at us.ibm.com "math is hard, lets go shopping!" - */ -static unsigned long cyc2ns_scale; -#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ - -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; -} - -static inline unsigned long long cycles_2_ns(unsigned long long cyc) -{ - return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; -} - - typedef struct { u32 cntl; /* CNTL_TIMER, R/W */ u32 load_tim; /* LOAD_TIM, W */ @@ -194,8 +163,6 @@ static struct irqaction omap_mpu_timer1_irq = { static __init void omap_init_mpu_timer(unsigned long rate) { - set_cyc2ns_scale(rate / 1000); - setup_irq(INT_TIMER1, &omap_mpu_timer1_irq); omap_mpu_timer_start(0, (rate / HZ) - 1, 1); @@ -260,22 +227,6 @@ static void __init omap_init_clocksource(unsigned long rate) printk(err, clocksource_mpu.name); } - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - unsigned long ticks = 0 - omap_mpu_timer_read(1); - unsigned long long ticks64; - - ticks64 = omap_mpu_timer2_overflows; - ticks64 <<= 32; - ticks64 |= ticks; - - return cycles_2_ns(ticks64); -} - /* * --------------------------------------------------------------------------- * Timer initialization diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/mach-omap1/timer32k.c index ea76f1979a3d..fbbdb806c95a 100644 --- a/arch/arm/plat-omap/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/plat-omap/timer32k.c + * linux/arch/arm/mach-omap1/timer32k.c * * OMAP 32K Timer * @@ -70,8 +70,6 @@ struct sys_timer omap_timer; #if defined(CONFIG_ARCH_OMAP16XX) #define TIMER_32K_SYNCHRONIZED 0xfffbc410 -#elif defined(CONFIG_ARCH_OMAP24XX) -#define TIMER_32K_SYNCHRONIZED (OMAP24XX_32KSYNCT_BASE + 0x10) #else #error OMAP 32KHz timer does not currently work on 15XX! #endif @@ -93,8 +91,6 @@ struct sys_timer omap_timer; #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \ (((nr_jiffies) * (clock_rate)) / HZ) -#if defined(CONFIG_ARCH_OMAP1) - static inline void omap_32k_timer_write(int val, int reg) { omap_writew(val, OMAP1_32K_TIMER_BASE + reg); @@ -120,30 +116,14 @@ static inline void omap_32k_timer_stop(void) #define omap_32k_timer_ack_irq() -#elif defined(CONFIG_ARCH_OMAP2) - -static struct omap_dm_timer *gptimer; - -static inline void omap_32k_timer_start(unsigned long load_val) -{ - omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val); - omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); - omap_dm_timer_start(gptimer); -} - -static inline void omap_32k_timer_stop(void) +static int omap_32k_timer_set_next_event(unsigned long delta, + struct clock_event_device *dev) { - omap_dm_timer_stop(gptimer); -} + omap_32k_timer_start(delta); -static inline void omap_32k_timer_ack_irq(void) -{ - u32 status = omap_dm_timer_read_status(gptimer); - omap_dm_timer_write_status(gptimer, status); + return 0; } -#endif - static void omap_32k_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { @@ -164,8 +144,9 @@ static void omap_32k_timer_set_mode(enum clock_event_mode mode, static struct clock_event_device clockevent_32k_timer = { .name = "32k-timer", - .features = CLOCK_EVT_FEAT_PERIODIC, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .shift = 32, + .set_next_event = omap_32k_timer_set_next_event, .set_mode = omap_32k_timer_set_mode, }; @@ -178,32 +159,6 @@ static inline unsigned long omap_32k_sync_timer_read(void) return omap_readl(TIMER_32K_SYNCHRONIZED); } -/* - * Rounds down to nearest usec. Note that this will overflow for larger values. - */ -static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k) -{ - return (ticks_32k * 5*5*5*5*5*5) >> 9; -} - -/* - * Rounds down to nearest nsec. - */ -static inline unsigned long long -omap_32k_ticks_to_nsecs(unsigned long ticks_32k) -{ - return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9; -} - -/* - * Returns current time from boot in nsecs. It's OK for this to wrap - * around for now, as it's just a relative time stamp. - */ -unsigned long long sched_clock(void) -{ - return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read()); -} - static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_32k_timer; @@ -222,22 +177,7 @@ static struct irqaction omap_32k_timer_irq = { static __init void omap_init_32k_timer(void) { - if (cpu_class_is_omap1()) - setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); - -#ifdef CONFIG_ARCH_OMAP2 - /* REVISIT: Check 24xx TIOCP_CFG settings after idle works */ - if (cpu_is_omap24xx()) { - gptimer = omap_dm_timer_request_specific(1); - BUG_ON(gptimer == NULL); - - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); - setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq); - omap_dm_timer_set_int_enable(gptimer, - OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW | - OMAP_TIMER_INT_MATCH); - } -#endif + setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC, NSEC_PER_SEC, diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b05b738d31e6..2feb6870b735 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,13 +3,15 @@ # # Common support -obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \ - serial.o gpmc.o - -obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o +obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \ + devices.o serial.o gpmc.o timer-gp.o # Power Management -obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o +obj-$(CONFIG_PM) += pm.o sleep.o + +# Clock framework +obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o +obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 64235dee5614..1682eb77c46d 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -33,7 +33,6 @@ #include <asm/arch/board.h> #include <asm/arch/common.h> #include <asm/arch/gpmc.h> -#include "prcm-regs.h" #include <asm/io.h> @@ -125,15 +124,18 @@ static inline void __init sdp2430_init_smc91x(void) int eth_cs; unsigned long cs_mem_base; unsigned int rate; - struct clk *l3ck; + struct clk *gpmc_fck; eth_cs = SDP2430_SMC91X_CS; - l3ck = clk_get(NULL, "core_l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); + gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ + if (IS_ERR(gpmc_fck)) { + WARN_ON(1); + return; + } + + clk_enable(gpmc_fck); + rate = clk_get_rate(gpmc_fck); /* Make sure CS1 timings are correct, for 2430 always muxed */ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); @@ -160,7 +162,7 @@ static inline void __init sdp2430_init_smc91x(void) if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; + goto out; } sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300; @@ -171,10 +173,13 @@ static inline void __init sdp2430_init_smc91x(void) printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", OMAP24XX_ETHR_GPIO_IRQ); gpmc_cs_free(eth_cs); - return; + goto out; } omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); +out: + clk_disable(gpmc_fck); + clk_put(gpmc_fck); } static void __init omap_2430sdp_init_irq(void) @@ -203,6 +208,7 @@ static void __init omap_2430sdp_init(void) static void __init omap_2430sdp_map_io(void) { + omap2_set_globals_243x(); omap2_map_common_io(); } diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 7846551f0575..620fa0f120ee 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,6 +26,8 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/leds.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -39,7 +41,7 @@ #include <asm/arch/board.h> #include <asm/arch/common.h> #include <asm/arch/gpmc.h> -#include "prcm-regs.h" +#include <asm/arch/control.h> /* LED & Switch macros */ #define LED0_GPIO13 13 @@ -187,17 +189,47 @@ static inline void __init apollon_init_smc91x(void) { unsigned long base; + unsigned int rate; + struct clk *gpmc_fck; + int eth_cs; + + gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ + if (IS_ERR(gpmc_fck)) { + WARN_ON(1); + return; + } + + clk_enable(gpmc_fck); + rate = clk_get_rate(gpmc_fck); + + eth_cs = APOLLON_ETH_CS; + /* Make sure CS1 timings are correct */ - GPMC_CONFIG1_1 = 0x00011203; - GPMC_CONFIG2_1 = 0x001f1f01; - GPMC_CONFIG3_1 = 0x00080803; - GPMC_CONFIG4_1 = 0x1c091c09; - GPMC_CONFIG5_1 = 0x041f1f1f; - GPMC_CONFIG6_1 = 0x000004c4; + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); + + if (rate >= 160000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else if (rate >= 130000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else {/* rate = 100000000 */ + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); + } if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) { printk(KERN_ERR "Failed to request GPMC CS for smc91x\n"); - return; + goto out; } apollon_smc91x_resources[0].start = base + 0x300; apollon_smc91x_resources[0].end = base + 0x30f; @@ -208,9 +240,13 @@ static inline void __init apollon_init_smc91x(void) printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); gpmc_cs_free(APOLLON_ETH_CS); - return; + goto out; } omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1); + +out: + clk_disable(gpmc_fck); + clk_put(gpmc_fck); } static void __init omap_apollon_init_irq(void) @@ -330,6 +366,8 @@ static void __init apollon_usb_init(void) static void __init omap_apollon_init(void) { + u32 v; + apollon_led_init(); apollon_sw_init(); apollon_flash_init(); @@ -339,7 +377,9 @@ static void __init omap_apollon_init(void) omap_cfg_reg(W19_24XX_SYS_NIRQ); /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */ - CONTROL_DEVCONF |= (1 << 24); + v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + v |= (1 << 24); + omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); /* * Make sure the serial ports are muxed on at this point. @@ -354,6 +394,7 @@ static void __init omap_apollon_init(void) static void __init omap_apollon_map_io(void) { + omap2_set_globals_242x(); omap2_map_common_io(); } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 90938151bcf1..df8be081e159 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -65,6 +65,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { + omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */ omap2_map_common_io(); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index f125f432cc3e..0d28f6897c8e 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -19,6 +19,8 @@ #include <linux/delay.h> #include <linux/workqueue.h> #include <linux/input.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -26,6 +28,7 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> +#include <asm/arch/control.h> #include <asm/arch/gpio.h> #include <asm/arch/gpioexpander.h> #include <asm/arch/mux.h> @@ -36,10 +39,13 @@ #include <asm/arch/keypad.h> #include <asm/arch/menelaus.h> #include <asm/arch/dma.h> -#include "prcm-regs.h" +#include <asm/arch/gpmc.h> #include <asm/io.h> +#define H4_FLASH_CS 0 +#define H4_SMC91X_CS 1 + static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 }; static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 }; @@ -116,8 +122,6 @@ static struct flash_platform_data h4_flash_data = { }; static struct resource h4_flash_resource = { - .start = H4_CS0_BASE, - .end = H4_CS0_BASE + SZ_64M - 1, .flags = IORESOURCE_MEM, }; @@ -253,21 +257,107 @@ static struct platform_device *h4_devices[] __initdata = { &h4_lcd_device, }; +/* 2420 Sysboot setup (2430 is different) */ +static u32 get_sysboot_value(void) +{ + return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) & + (OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK | + OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK | + OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK)); +} + +/* H4-2420's always used muxed mode, H4-2422's always use non-muxed + * + * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423 + * correctly. The macro needs to look at production_id not just hawkeye. + */ +static u32 is_gpmc_muxed(void) +{ + u32 mux; + mux = get_sysboot_value(); + if ((mux & 0xF) == 0xd) + return 1; /* NAND config (could be either) */ + if (mux & 0x2) /* if mux'ed */ + return 1; + else + return 0; +} + static inline void __init h4_init_debug(void) { + int eth_cs; + unsigned long cs_mem_base; + unsigned int muxed, rate; + struct clk *gpmc_fck; + + eth_cs = H4_SMC91X_CS; + + gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ + if (IS_ERR(gpmc_fck)) { + WARN_ON(1); + return; + } + + clk_enable(gpmc_fck); + rate = clk_get_rate(gpmc_fck); + clk_disable(gpmc_fck); + clk_put(gpmc_fck); + + if (is_gpmc_muxed()) + muxed = 0x200; + else + muxed = 0; + /* Make sure CS1 timings are correct */ - GPMC_CONFIG1_1 = 0x00011200; - GPMC_CONFIG2_1 = 0x001f1f01; - GPMC_CONFIG3_1 = 0x00080803; - GPMC_CONFIG4_1 = 0x1c091c09; - GPMC_CONFIG5_1 = 0x041f1f1f; - GPMC_CONFIG6_1 = 0x000004c4; - GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, + 0x00011000 | muxed); + + if (rate >= 160000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else if (rate >= 130000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else {/* rate = 100000000 */ + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); + } + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + goto out; + } + udelay(100); omap_cfg_reg(M15_24XX_GPIO92); if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0) gpmc_cs_free(eth_cs); + +out: + clk_disable(gpmc_fck); + clk_put(gpmc_fck); +} + +static void __init h4_init_flash(void) +{ + unsigned long base; + + if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) { + printk("Can't request GPMC CS for flash\n"); + return; + } + h4_flash_resource.start = base; + h4_flash_resource.end = base + SZ_64M - 1; } static void __init omap_h4_init_irq(void) @@ -275,6 +365,7 @@ static void __init omap_h4_init_irq(void) omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); + h4_init_flash(); } static struct omap_uart_config h4_uart_config __initdata = { @@ -329,6 +420,7 @@ static void __init omap_h4_init(void) static void __init omap_h4_map_io(void) { + omap2_set_globals_242x(); omap2_map_common_io(); } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index e6e85b7b097b..ab9fc57d25f1 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -1,20 +1,19 @@ /* * linux/arch/arm/mach-omap2/clock.c * - * Copyright (C) 2005 Texas Instruments Inc. - * Richard Woodruff <r-woodruff2@ti.com> - * Created for OMAP2. - * - * Cleaned up and modified to use omap shared clock framework by - * Tony Lindgren <tony@atomide.com> + * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2004-2008 Nokia Corporation * - * Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#undef DEBUG + #include <linux/module.h> #include <linux/kernel.h> #include <linux/device.h> @@ -22,176 +21,229 @@ #include <linux/errno.h> #include <linux/delay.h> #include <linux/clk.h> +#include <asm/bitops.h> #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/sram.h> +#include <asm/arch/cpu.h> #include <asm/div64.h> -#include "prcm-regs.h" #include "memory.h" +#include "sdrc.h" #include "clock.h" +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" +#include "cm-regbits-34xx.h" -#undef DEBUG - -//#define DOWN_VARIABLE_DPLL 1 /* Experimental */ +#define MAX_CLOCK_ENABLE_WAIT 100000 -static struct prcm_config *curr_prcm_set; -static u32 curr_perf_level = PRCM_FULL_SPEED; -static struct clk *vclk; -static struct clk *sclk; +u8 cpu_mask; /*------------------------------------------------------------------------- * Omap2 specific clock functions *-------------------------------------------------------------------------*/ -/* Recalculate SYST_CLK */ -static void omap2_sys_clk_recalc(struct clk * clk) +/** + * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware + * @clk: OMAP clock struct ptr to use + * + * Given a pointer to a source-selectable struct clk, read the hardware + * register and determine what its parent is currently set to. Update the + * clk->parent field with the appropriate clk ptr. + */ +void omap2_init_clksel_parent(struct clk *clk) { - u32 div = PRCM_CLKSRC_CTRL; - div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ - div >>= clk->rate_offset; - clk->rate = (clk->parent->rate / div); - propagate_rate(clk); + const struct clksel *clks; + const struct clksel_rate *clkr; + u32 r, found = 0; + + if (!clk->clksel) + return; + + r = __raw_readl(clk->clksel_reg) & clk->clksel_mask; + r >>= __ffs(clk->clksel_mask); + + for (clks = clk->clksel; clks->parent && !found; clks++) { + for (clkr = clks->rates; clkr->div && !found; clkr++) { + if ((clkr->flags & cpu_mask) && (clkr->val == r)) { + if (clk->parent != clks->parent) { + pr_debug("clock: inited %s parent " + "to %s (was %s)\n", + clk->name, clks->parent->name, + ((clk->parent) ? + clk->parent->name : "NULL")); + clk->parent = clks->parent; + }; + found = 1; + } + } + } + + if (!found) + printk(KERN_ERR "clock: init parent: could not find " + "regval %0x for clock %s\n", r, clk->name); + + return; } -static u32 omap2_get_dpll_rate(struct clk * tclk) +/* Returns the DPLL rate */ +u32 omap2_get_dpll_rate(struct clk *clk) { long long dpll_clk; - int dpll_mult, dpll_div, amult; + u32 dpll_mult, dpll_div, dpll; + const struct dpll_data *dd; + + dd = clk->dpll_data; + /* REVISIT: What do we return on error? */ + if (!dd) + return 0; + + dpll = __raw_readl(dd->mult_div1_reg); + dpll_mult = dpll & dd->mult_mask; + dpll_mult >>= __ffs(dd->mult_mask); + dpll_div = dpll & dd->div1_mask; + dpll_div >>= __ffs(dd->div1_mask); - dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */ - dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */ - dpll_clk = (long long)tclk->parent->rate * dpll_mult; + dpll_clk = (long long)clk->parent->rate * dpll_mult; do_div(dpll_clk, dpll_div + 1); - amult = CM_CLKSEL2_PLL & 0x3; - dpll_clk *= amult; return dpll_clk; } -static void omap2_followparent_recalc(struct clk *clk) -{ - followparent_recalc(clk); -} - -static void omap2_propagate_rate(struct clk * clk) +/* + * Used for clocks that have the same value as the parent clock, + * divided by some factor + */ +void omap2_fixed_divisor_recalc(struct clk *clk) { - if (!(clk->flags & RATE_FIXED)) - clk->rate = clk->parent->rate; + WARN_ON(!clk->fixed_div); - propagate_rate(clk); -} + clk->rate = clk->parent->rate / clk->fixed_div; -static void omap2_set_osc_ck(int enable) -{ - if (enable) - PRCM_CLKSRC_CTRL &= ~(0x3 << 3); - else - PRCM_CLKSRC_CTRL |= 0x3 << 3; + if (clk->flags & RATE_PROPAGATES) + propagate_rate(clk); } -/* Enable an APLL if off */ -static void omap2_clk_fixed_enable(struct clk *clk) +/** + * omap2_wait_clock_ready - wait for clock to enable + * @reg: physical address of clock IDLEST register + * @mask: value to mask against to determine if the clock is active + * @name: name of the clock (for printk) + * + * Returns 1 if the clock enabled in time, or 0 if it failed to enable + * in roughly MAX_CLOCK_ENABLE_WAIT microseconds. + */ +int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) { - u32 cval, i=0; + int i = 0; + int ena = 0; - if (clk->enable_bit == 0xff) /* Parent will do it */ - return; + /* + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + */ + if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) { + ena = mask; + } else if (cpu_mask & RATE_IN_343X) { + ena = 0; + } - cval = CM_CLKEN_PLL; + /* Wait for lock */ + while (((__raw_readl(reg) & mask) != ena) && + (i++ < MAX_CLOCK_ENABLE_WAIT)) { + udelay(1); + } - if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit)) - return; + if (i < MAX_CLOCK_ENABLE_WAIT) + pr_debug("Clock %s stable after %d loops\n", name, i); + else + printk(KERN_ERR "Clock %s didn't enable in %d tries\n", + name, MAX_CLOCK_ENABLE_WAIT); - cval &= ~(0x3 << clk->enable_bit); - cval |= (0x3 << clk->enable_bit); - CM_CLKEN_PLL = cval; - if (clk == &apll96_ck) - cval = (1 << 8); - else if (clk == &apll54_ck) - cval = (1 << 6); + return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0; +}; - while (!(CM_IDLEST_CKGEN & cval)) { /* Wait for lock */ - ++i; - udelay(1); - if (i == 100000) { - printk(KERN_ERR "Clock %s didn't lock\n", clk->name); - break; - } - } -} +/* + * Note: We don't need special code here for INVERT_ENABLE + * for the time being since INVERT_ENABLE only applies to clocks enabled by + * CM_CLKEN_PLL + */ static void omap2_clk_wait_ready(struct clk *clk) { - unsigned long reg, other_reg, st_reg; + void __iomem *reg, *other_reg, *st_reg; u32 bit; - int i; - - reg = (unsigned long) clk->enable_reg; - if (reg == (unsigned long) &CM_FCLKEN1_CORE || - reg == (unsigned long) &CM_FCLKEN2_CORE) - other_reg = (reg & ~0xf0) | 0x10; - else if (reg == (unsigned long) &CM_ICLKEN1_CORE || - reg == (unsigned long) &CM_ICLKEN2_CORE) - other_reg = (reg & ~0xf0) | 0x00; + + /* + * REVISIT: This code is pretty ugly. It would be nice to generalize + * it and pull it into struct clk itself somehow. + */ + reg = clk->enable_reg; + if ((((u32)reg & 0xff) >= CM_FCLKEN1) && + (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2)) + other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */ + else if ((((u32)reg & 0xff) >= CM_ICLKEN1) && + (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4)) + other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */ else return; + /* REVISIT: What are the appropriate exclusions for 34XX? */ /* No check for DSS or cam clocks */ - if ((reg & 0x0f) == 0) { - if (clk->enable_bit <= 1 || clk->enable_bit == 31) + if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */ + if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT || + clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT || + clk->enable_bit == OMAP24XX_EN_CAM_SHIFT) return; } + /* REVISIT: What are the appropriate exclusions for 34XX? */ + /* OMAP3: ignore DSS-mod clocks */ + if (cpu_is_omap34xx() && + (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) || + ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) && + clk->enable_bit == OMAP3430_EN_SSI_SHIFT))) + return; + /* Check if both functional and interface clocks * are running. */ bit = 1 << clk->enable_bit; if (!(__raw_readl(other_reg) & bit)) return; - st_reg = (other_reg & ~0xf0) | 0x20; - i = 0; - while (!(__raw_readl(st_reg) & bit)) { - i++; - if (i == 100000) { - printk(KERN_ERR "Timeout enabling clock %s\n", clk->name); - break; - } - } - if (i) - pr_debug("Clock %s stable after %d loops\n", clk->name, i); + st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */ + + omap2_wait_clock_ready(st_reg, bit, clk->name); } /* Enables clock without considering parent dependencies or use count * REVISIT: Maybe change this to use clk->enable like on omap1? */ -static int _omap2_clk_enable(struct clk * clk) +int _omap2_clk_enable(struct clk *clk) { u32 regval32; - if (clk->flags & ALWAYS_ENABLED) + if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) return 0; - if (unlikely(clk == &osc_ck)) { - omap2_set_osc_ck(1); - return 0; - } + if (clk->enable) + return clk->enable(clk); if (unlikely(clk->enable_reg == 0)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); - return 0; - } - - if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) { - omap2_clk_fixed_enable(clk); - return 0; + return 0; /* REVISIT: -EINVAL */ } regval32 = __raw_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); + if (clk->flags & INVERT_ENABLE) + regval32 &= ~(1 << clk->enable_bit); + else + regval32 |= (1 << clk->enable_bit); __raw_writel(regval32, clk->enable_reg); wmb(); @@ -200,44 +252,48 @@ static int _omap2_clk_enable(struct clk * clk) return 0; } -/* Stop APLL */ -static void omap2_clk_fixed_disable(struct clk *clk) -{ - u32 cval; - - if(clk->enable_bit == 0xff) /* let parent off do it */ - return; - - cval = CM_CLKEN_PLL; - cval &= ~(0x3 << clk->enable_bit); - CM_CLKEN_PLL = cval; -} - /* Disables clock without considering parent dependencies or use count */ -static void _omap2_clk_disable(struct clk *clk) +void _omap2_clk_disable(struct clk *clk) { u32 regval32; - if (unlikely(clk == &osc_ck)) { - omap2_set_osc_ck(0); + if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) return; - } - if (clk->enable_reg == 0) + if (clk->disable) { + clk->disable(clk); return; + } - if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) { - omap2_clk_fixed_disable(clk); + if (clk->enable_reg == 0) { + /* + * 'Independent' here refers to a clock which is not + * controlled by its parent. + */ + printk(KERN_ERR "clock: clk_disable called on independent " + "clock %s which has no enable_reg\n", clk->name); return; } regval32 = __raw_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); + if (clk->flags & INVERT_ENABLE) + regval32 |= (1 << clk->enable_bit); + else + regval32 &= ~(1 << clk->enable_bit); __raw_writel(regval32, clk->enable_reg); wmb(); } -static int omap2_clk_enable(struct clk *clk) +void omap2_clk_disable(struct clk *clk) +{ + if (clk->usecount > 0 && !(--clk->usecount)) { + _omap2_clk_disable(clk); + if (likely((u32)clk->parent)) + omap2_clk_disable(clk->parent); + } +} + +int omap2_clk_enable(struct clk *clk) { int ret = 0; @@ -261,519 +317,314 @@ static int omap2_clk_enable(struct clk *clk) return ret; } -static void omap2_clk_disable(struct clk *clk) -{ - if (clk->usecount > 0 && !(--clk->usecount)) { - _omap2_clk_disable(clk); - if (likely((u32)clk->parent)) - omap2_clk_disable(clk->parent); - } -} - -/* - * Uses the current prcm set to tell if a rate is valid. - * You can go slower, but not faster within a given rate set. - */ -static u32 omap2_dpll_round_rate(unsigned long target_rate) -{ - u32 high, low; - - if ((CM_CLKSEL2_PLL & 0x3) == 1) { /* DPLL clockout */ - high = curr_prcm_set->dpll_speed * 2; - low = curr_prcm_set->dpll_speed; - } else { /* DPLL clockout x 2 */ - high = curr_prcm_set->dpll_speed; - low = curr_prcm_set->dpll_speed / 2; - } - -#ifdef DOWN_VARIABLE_DPLL - if (target_rate > high) - return high; - else - return target_rate; -#else - if (target_rate > low) - return high; - else - return low; -#endif - -} - /* * Used for clocks that are part of CLKSEL_xyz governed clocks. * REVISIT: Maybe change to use clk->enable() functions like on omap1? */ -static void omap2_clksel_recalc(struct clk * clk) +void omap2_clksel_recalc(struct clk *clk) { - u32 fixed = 0, div = 0; + u32 div = 0; - if (clk == &dpll_ck) { - clk->rate = omap2_get_dpll_rate(clk); - fixed = 1; - div = 0; - } + pr_debug("clock: recalc'ing clksel clk %s\n", clk->name); - if (clk == &iva1_mpu_int_ifck) { - div = 2; - fixed = 1; - } - - if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) { - clk->rate = sys_ck.rate; + div = omap2_clksel_get_divisor(clk); + if (div == 0) return; - } - if (!fixed) { - div = omap2_clksel_get_divisor(clk); - if (div == 0) - return; - } + if (unlikely(clk->rate == clk->parent->rate / div)) + return; + clk->rate = clk->parent->rate / div; - if (div != 0) { - if (unlikely(clk->rate == clk->parent->rate / div)) - return; - clk->rate = clk->parent->rate / div; - } + pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div); if (unlikely(clk->flags & RATE_PROPAGATES)) propagate_rate(clk); } -/* - * Finds best divider value in an array based on the source and target - * rates. The divider array must be sorted with smallest divider first. +/** + * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent + * @clk: OMAP struct clk ptr to inspect + * @src_clk: OMAP struct clk ptr of the parent clk to search for + * + * Scan the struct clksel array associated with the clock to find + * the element associated with the supplied parent clock address. + * Returns a pointer to the struct clksel on success or NULL on error. */ -static inline u32 omap2_divider_from_table(u32 size, u32 *div_array, - u32 src_rate, u32 tgt_rate) +const struct clksel *omap2_get_clksel_by_parent(struct clk *clk, + struct clk *src_clk) { - int i, test_rate; + const struct clksel *clks; - if (div_array == NULL) - return ~1; + if (!clk->clksel) + return NULL; - for (i=0; i < size; i++) { - test_rate = src_rate / *div_array; - if (test_rate <= tgt_rate) - return *div_array; - ++div_array; + for (clks = clk->clksel; clks->parent; clks++) { + if (clks->parent == src_clk) + break; /* Found the requested parent */ } - return ~0; /* No acceptable divider */ + if (!clks->parent) { + printk(KERN_ERR "clock: Could not find parent clock %s in " + "clksel array of clock %s\n", src_clk->name, + clk->name); + return NULL; + } + + return clks; } -/* - * Find divisor for the given clock and target rate. +/** + * omap2_clksel_round_rate_div - find divisor for the given clock and rate + * @clk: OMAP struct clk to use + * @target_rate: desired clock rate + * @new_div: ptr to where we should store the divisor * + * Finds 'best' divider value in an array based on the source and target + * rates. The divider array must be sorted with smallest divider first. * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, * they are only settable as part of virtual_prcm set. + * + * Returns the rounded clock rate or returns 0xffffffff on error. */ -static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate, - u32 *new_div) +u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, + u32 *new_div) { - u32 gfx_div[] = {2, 3, 4}; - u32 sysclkout_div[] = {1, 2, 4, 8, 16}; - u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16}; - u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18}; - u32 best_div = ~0, asize = 0; - u32 *div_array = NULL; - - switch (tclk->flags & SRC_RATE_SEL_MASK) { - case CM_GFX_SEL1: - asize = 3; - div_array = gfx_div; - break; - case CM_PLL_SEL1: - return omap2_dpll_round_rate(target_rate); - case CM_SYSCLKOUT_SEL1: - asize = 5; - div_array = sysclkout_div; - break; - case CM_CORE_SEL1: - if(tclk == &dss1_fck){ - if(tclk->parent == &core_ck){ - asize = 10; - div_array = dss1_div; - } else { - *new_div = 0; /* fixed clk */ - return(tclk->parent->rate); - } - } else if((tclk == &vlynq_fck) && cpu_is_omap2420()){ - if(tclk->parent == &core_ck){ - asize = 10; - div_array = vylnq_div; - } else { - *new_div = 0; /* fixed clk */ - return(tclk->parent->rate); - } - } - break; + unsigned long test_rate; + const struct clksel *clks; + const struct clksel_rate *clkr; + u32 last_div = 0; + + printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n", + clk->name, target_rate); + + *new_div = 1; + + clks = omap2_get_clksel_by_parent(clk, clk->parent); + if (clks == NULL) + return ~0; + + for (clkr = clks->rates; clkr->div; clkr++) { + if (!(clkr->flags & cpu_mask)) + continue; + + /* Sanity check */ + if (clkr->div <= last_div) + printk(KERN_ERR "clock: clksel_rate table not sorted " + "for clock %s", clk->name); + + last_div = clkr->div; + + test_rate = clk->parent->rate / clkr->div; + + if (test_rate <= target_rate) + break; /* found it */ } - best_div = omap2_divider_from_table(asize, div_array, - tclk->parent->rate, target_rate); - if (best_div == ~0){ - *new_div = 1; - return best_div; /* signal error */ + if (!clkr->div) { + printk(KERN_ERR "clock: Could not find divisor for target " + "rate %ld for clock %s parent %s\n", target_rate, + clk->name, clk->parent->name); + return ~0; } - *new_div = best_div; - return (tclk->parent->rate / best_div); + *new_div = clkr->div; + + printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div, + (clk->parent->rate / clkr->div)); + + return (clk->parent->rate / clkr->div); } -/* Given a clock and a rate apply a clock specific rounding function */ -static long omap2_clk_round_rate(struct clk *clk, unsigned long rate) +/** + * omap2_clksel_round_rate - find rounded rate for the given clock and rate + * @clk: OMAP struct clk to use + * @target_rate: desired clock rate + * + * Compatibility wrapper for OMAP clock framework + * Finds best target rate based on the source clock and possible dividers. + * rates. The divider array must be sorted with smallest divider first. + * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, + * they are only settable as part of virtual_prcm set. + * + * Returns the rounded clock rate or returns 0xffffffff on error. + */ +long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate) { - u32 new_div = 0; - int valid_rate; + u32 new_div; - if (clk->flags & RATE_FIXED) - return clk->rate; + return omap2_clksel_round_rate_div(clk, target_rate, &new_div); +} - if (clk->flags & RATE_CKCTL) { - valid_rate = omap2_clksel_round_rate(clk, rate, &new_div); - return valid_rate; - } +/* Given a clock and a rate apply a clock specific rounding function */ +long omap2_clk_round_rate(struct clk *clk, unsigned long rate) +{ if (clk->round_rate != 0) return clk->round_rate(clk, rate); + if (clk->flags & RATE_FIXED) + printk(KERN_ERR "clock: generic omap2_clk_round_rate called " + "on fixed-rate clock %s\n", clk->name); + return clk->rate; } -/* - * Check the DLL lock state, and return tue if running in unlock mode. - * This is needed to compensate for the shifted DLL value in unlock mode. +/** + * omap2_clksel_to_divisor() - turn clksel field value into integer divider + * @clk: OMAP struct clk to use + * @field_val: register field value to find + * + * Given a struct clk of a rate-selectable clksel clock, and a register field + * value to search for, find the corresponding clock divisor. The register + * field value should be pre-masked and shifted down so the LSB is at bit 0 + * before calling. Returns 0 on error */ -static u32 omap2_dll_force_needed(void) +u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val) { - u32 dll_state = SDRC_DLLA_CTRL; /* dlla and dllb are a set */ + const struct clksel *clks; + const struct clksel_rate *clkr; - if ((dll_state & (1 << 2)) == (1 << 2)) - return 1; - else + clks = omap2_get_clksel_by_parent(clk, clk->parent); + if (clks == NULL) return 0; -} -static u32 omap2_reprogram_sdrc(u32 level, u32 force) -{ - u32 slow_dll_ctrl, fast_dll_ctrl, m_type; - u32 prev = curr_perf_level, flags; - - if ((curr_perf_level == level) && !force) - return prev; - - m_type = omap2_memory_get_type(); - slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl(); - fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl(); - - if (level == PRCM_HALF_SPEED) { - local_irq_save(flags); - PRCM_VOLTSETUP = 0xffff; - omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED, - slow_dll_ctrl, m_type); - curr_perf_level = PRCM_HALF_SPEED; - local_irq_restore(flags); + for (clkr = clks->rates; clkr->div; clkr++) { + if ((clkr->flags & cpu_mask) && (clkr->val == field_val)) + break; } - if (level == PRCM_FULL_SPEED) { - local_irq_save(flags); - PRCM_VOLTSETUP = 0xffff; - omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED, - fast_dll_ctrl, m_type); - curr_perf_level = PRCM_FULL_SPEED; - local_irq_restore(flags); + + if (!clkr->div) { + printk(KERN_ERR "clock: Could not find fieldval %d for " + "clock %s parent %s\n", field_val, clk->name, + clk->parent->name); + return 0; } - return prev; + return clkr->div; } -static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate) +/** + * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value + * @clk: OMAP struct clk to use + * @div: integer divisor to search for + * + * Given a struct clk of a rate-selectable clksel clock, and a clock divisor, + * find the corresponding register field value. The return register value is + * the value before left-shifting. Returns 0xffffffff on error + */ +u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) { - u32 flags, cur_rate, low, mult, div, valid_rate, done_rate; - u32 bypass = 0; - struct prcm_config tmpset; - int ret = -EINVAL; + const struct clksel *clks; + const struct clksel_rate *clkr; - local_irq_save(flags); - cur_rate = omap2_get_dpll_rate(&dpll_ck); - mult = CM_CLKSEL2_PLL & 0x3; - - if ((rate == (cur_rate / 2)) && (mult == 2)) { - omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); - } else if ((rate == (cur_rate * 2)) && (mult == 1)) { - omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); - } else if (rate != cur_rate) { - valid_rate = omap2_dpll_round_rate(rate); - if (valid_rate != rate) - goto dpll_exit; - - if ((CM_CLKSEL2_PLL & 0x3) == 1) - low = curr_prcm_set->dpll_speed; - else - low = curr_prcm_set->dpll_speed / 2; - - tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL; - tmpset.cm_clksel1_pll &= ~(0x3FFF << 8); - div = ((curr_prcm_set->xtal_speed / 1000000) - 1); - tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL; - tmpset.cm_clksel2_pll &= ~0x3; - if (rate > low) { - tmpset.cm_clksel2_pll |= 0x2; - mult = ((rate / 2) / 1000000); - done_rate = PRCM_FULL_SPEED; - } else { - tmpset.cm_clksel2_pll |= 0x1; - mult = (rate / 1000000); - done_rate = PRCM_HALF_SPEED; - } - tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12)); - - /* Worst case */ - tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS; - - if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ - bypass = 1; + /* should never happen */ + WARN_ON(div == 0); - omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */ - - /* Force dll lock mode */ - omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, - bypass); + clks = omap2_get_clksel_by_parent(clk, clk->parent); + if (clks == NULL) + return 0; - /* Errata: ret dll entry state */ - omap2_init_memory_params(omap2_dll_force_needed()); - omap2_reprogram_sdrc(done_rate, 0); + for (clkr = clks->rates; clkr->div; clkr++) { + if ((clkr->flags & cpu_mask) && (clkr->div == div)) + break; } - omap2_clksel_recalc(&dpll_ck); - ret = 0; -dpll_exit: - local_irq_restore(flags); - return(ret); -} + if (!clkr->div) { + printk(KERN_ERR "clock: Could not find divisor %d for " + "clock %s parent %s\n", div, clk->name, + clk->parent->name); + return 0; + } -/* Just return the MPU speed */ -static void omap2_mpu_recalc(struct clk * clk) -{ - clk->rate = curr_prcm_set->mpu_speed; + return clkr->val; } -/* - * Look for a rate equal or less than the target rate given a configuration set. +/** + * omap2_get_clksel - find clksel register addr & field mask for a clk + * @clk: struct clk to use + * @field_mask: ptr to u32 to store the register field mask * - * What's not entirely clear is "which" field represents the key field. - * Some might argue L3-DDR, others ARM, others IVA. This code is simple and - * just uses the ARM rates. + * Returns the address of the clksel register upon success or NULL on error. */ -static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate) +void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) { - struct prcm_config * ptr; - long highest_rate; - - if (clk != &virt_prcm_set) - return -EINVAL; - - highest_rate = -EINVAL; - - for (ptr = rate_table; ptr->mpu_speed; ptr++) { - if (ptr->xtal_speed != sys_ck.rate) - continue; + if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0))) + return NULL; - highest_rate = ptr->mpu_speed; + *field_mask = clk->clksel_mask; - /* Can check only after xtal frequency check */ - if (ptr->mpu_speed <= rate) - break; - } - return highest_rate; + return clk->clksel_reg; } -/* - * omap2_convert_field_to_div() - turn field value into integer divider +/** + * omap2_clksel_get_divisor - get current divider applied to parent clock. + * @clk: OMAP struct clk to use. + * + * Returns the integer divisor upon success or 0 on error. */ -static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val) +u32 omap2_clksel_get_divisor(struct clk *clk) { - u32 i; - u32 clkout_array[] = {1, 2, 4, 8, 16}; + u32 field_mask, field_val; + void __iomem *div_addr; - if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) { - for (i = 0; i < 5; i++) { - if (field_val == i) - return clkout_array[i]; - } - return ~0; - } else - return field_val; + div_addr = omap2_get_clksel(clk, &field_mask); + if (div_addr == 0) + return 0; + + field_val = __raw_readl(div_addr) & field_mask; + field_val >>= __ffs(field_mask); + + return omap2_clksel_to_divisor(clk, field_val); } -/* - * Returns the CLKSEL divider register value - * REVISIT: This should be cleaned up to work nicely with void __iomem * - */ -static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask, - struct clk *clk) +int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) { - int ret = ~0; - u32 reg_val, div_off; - u32 div_addr = 0; - u32 mask = ~0; - - div_off = clk->rate_offset; - - switch ((*div_sel & SRC_RATE_SEL_MASK)) { - case CM_MPU_SEL1: - div_addr = (u32)&CM_CLKSEL_MPU; - mask = 0x1f; - break; - case CM_DSP_SEL1: - div_addr = (u32)&CM_CLKSEL_DSP; - if (cpu_is_omap2420()) { - if ((div_off == 0) || (div_off == 8)) - mask = 0x1f; - else if (div_off == 5) - mask = 0x3; - } else if (cpu_is_omap2430()) { - if (div_off == 0) - mask = 0x1f; - else if (div_off == 5) - mask = 0x3; - } - break; - case CM_GFX_SEL1: - div_addr = (u32)&CM_CLKSEL_GFX; - if (div_off == 0) - mask = 0x7; - break; - case CM_MODEM_SEL1: - div_addr = (u32)&CM_CLKSEL_MDM; - if (div_off == 0) - mask = 0xf; - break; - case CM_SYSCLKOUT_SEL1: - div_addr = (u32)&PRCM_CLKOUT_CTRL; - if ((div_off == 3) || (div_off == 11)) - mask= 0x3; - break; - case CM_CORE_SEL1: - div_addr = (u32)&CM_CLKSEL1_CORE; - switch (div_off) { - case 0: /* l3 */ - case 8: /* dss1 */ - case 15: /* vylnc-2420 */ - case 20: /* ssi */ - mask = 0x1f; break; - case 5: /* l4 */ - mask = 0x3; break; - case 13: /* dss2 */ - mask = 0x1; break; - case 25: /* usb */ - mask = 0x7; break; - } - } + u32 field_mask, field_val, reg_val, validrate, new_div = 0; + void __iomem *div_addr; - *field_mask = mask; + validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); + if (validrate != rate) + return -EINVAL; - if (unlikely(mask == ~0)) - div_addr = 0; + div_addr = omap2_get_clksel(clk, &field_mask); + if (div_addr == 0) + return -EINVAL; - *div_sel = div_addr; + field_val = omap2_divisor_to_clksel(clk, new_div); + if (field_val == ~0) + return -EINVAL; - if (unlikely(div_addr == 0)) - return ret; + reg_val = __raw_readl(div_addr); + reg_val &= ~field_mask; + reg_val |= (field_val << __ffs(field_mask)); + __raw_writel(reg_val, div_addr); + wmb(); - /* Isolate field */ - reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off); + clk->rate = clk->parent->rate / new_div; - /* Normalize back to divider value */ - reg_val >>= div_off; + if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) { + __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL); + wmb(); + } - return reg_val; + return 0; } -/* - * Return divider to be applied to parent clock. - * Return 0 on error. - */ -static u32 omap2_clksel_get_divisor(struct clk *clk) -{ - int ret = 0; - u32 div, div_sel, div_off, field_mask, field_val; - - /* isolate control register */ - div_sel = (SRC_RATE_SEL_MASK & clk->flags); - - div_off = clk->rate_offset; - field_val = omap2_get_clksel(&div_sel, &field_mask, clk); - if (div_sel == 0) - return ret; - - div_sel = (SRC_RATE_SEL_MASK & clk->flags); - div = omap2_clksel_to_divisor(div_sel, field_val); - - return div; -} /* Set the clock rate for a clock source */ -static int omap2_clk_set_rate(struct clk *clk, unsigned long rate) - +int omap2_clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EINVAL; - void __iomem * reg; - u32 div_sel, div_off, field_mask, field_val, reg_val, validrate; - u32 new_div = 0; - - if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) { - if (clk == &dpll_ck) - return omap2_reprogram_dpll(clk, rate); - - /* Isolate control register */ - div_sel = (SRC_RATE_SEL_MASK & clk->flags); - div_off = clk->rate_offset; - - validrate = omap2_clksel_round_rate(clk, rate, &new_div); - if (validrate != rate) - return(ret); - field_val = omap2_get_clksel(&div_sel, &field_mask, clk); - if (div_sel == 0) - return ret; - - if (clk->flags & CM_SYSCLKOUT_SEL1) { - switch (new_div) { - case 16: - field_val = 4; - break; - case 8: - field_val = 3; - break; - case 4: - field_val = 2; - break; - case 2: - field_val = 1; - break; - case 1: - field_val = 0; - break; - } - } else - field_val = new_div; + pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate); - reg = (void __iomem *)div_sel; - - reg_val = __raw_readl(reg); - reg_val &= ~(field_mask << div_off); - reg_val |= (field_val << div_off); - __raw_writel(reg_val, reg); - wmb(); - clk->rate = clk->parent->rate / field_val; + /* CONFIG_PARTICIPANT clocks are changed only in sets via the + rate table mechanism, driven by mpu_speed */ + if (clk->flags & CONFIG_PARTICIPANT) + return -EINVAL; - if (clk->flags & DELAYED_APP) { - __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); - wmb(); - } - ret = 0; - } else if (clk->set_rate != 0) + /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */ + if (clk->set_rate != 0) ret = clk->set_rate(clk, rate); if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) @@ -782,242 +633,92 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate) return ret; } -/* Converts encoded control register address into a full address */ -static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset, - struct clk *src_clk, u32 *field_mask) -{ - u32 val = ~0, src_reg_addr = 0, mask = 0; - - /* Find target control register.*/ - switch ((*type_to_addr & SRC_RATE_SEL_MASK)) { - case CM_CORE_SEL1: - src_reg_addr = (u32)&CM_CLKSEL1_CORE; - if (reg_offset == 13) { /* DSS2_fclk */ - mask = 0x1; - if (src_clk == &sys_ck) - val = 0; - if (src_clk == &func_48m_ck) - val = 1; - } else if (reg_offset == 8) { /* DSS1_fclk */ - mask = 0x1f; - if (src_clk == &sys_ck) - val = 0; - else if (src_clk == &core_ck) /* divided clock */ - val = 0x10; /* rate needs fixing */ - } else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/ - mask = 0x1F; - if(src_clk == &func_96m_ck) - val = 0; - else if (src_clk == &core_ck) - val = 0x10; - } - break; - case CM_CORE_SEL2: - src_reg_addr = (u32)&CM_CLKSEL2_CORE; - mask = 0x3; - if (src_clk == &func_32k_ck) - val = 0x0; - if (src_clk == &sys_ck) - val = 0x1; - if (src_clk == &alt_ck) - val = 0x2; - break; - case CM_WKUP_SEL1: - src_reg_addr = (u32)&CM_CLKSEL_WKUP; - mask = 0x3; - if (src_clk == &func_32k_ck) - val = 0x0; - if (src_clk == &sys_ck) - val = 0x1; - if (src_clk == &alt_ck) - val = 0x2; - break; - case CM_PLL_SEL1: - src_reg_addr = (u32)&CM_CLKSEL1_PLL; - mask = 0x1; - if (reg_offset == 0x3) { - if (src_clk == &apll96_ck) - val = 0; - if (src_clk == &alt_ck) - val = 1; - } - else if (reg_offset == 0x5) { - if (src_clk == &apll54_ck) - val = 0; - if (src_clk == &alt_ck) - val = 1; - } - break; - case CM_PLL_SEL2: - src_reg_addr = (u32)&CM_CLKSEL2_PLL; - mask = 0x3; - if (src_clk == &func_32k_ck) - val = 0x0; - if (src_clk == &dpll_ck) - val = 0x2; - break; - case CM_SYSCLKOUT_SEL1: - src_reg_addr = (u32)&PRCM_CLKOUT_CTRL; - mask = 0x3; - if (src_clk == &dpll_ck) - val = 0; - if (src_clk == &sys_ck) - val = 1; - if (src_clk == &func_96m_ck) - val = 2; - if (src_clk == &func_54m_ck) - val = 3; - break; - } - - if (val == ~0) /* Catch errors in offset */ - *type_to_addr = 0; - else - *type_to_addr = src_reg_addr; - *field_mask = mask; - - return val; -} - -static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) +/* + * Converts encoded control register address into a full address + * On error, *src_addr will be returned as 0. + */ +static u32 omap2_clksel_get_src_field(void __iomem **src_addr, + struct clk *src_clk, u32 *field_mask, + struct clk *clk, u32 *parent_div) { - void __iomem * reg; - u32 src_sel, src_off, field_val, field_mask, reg_val, rate; - int ret = -EINVAL; - - if (unlikely(clk->flags & CONFIG_PARTICIPANT)) - return ret; - - if (clk->flags & SRC_SEL_MASK) { /* On-chip SEL collection */ - src_sel = (SRC_RATE_SEL_MASK & clk->flags); - src_off = clk->src_offset; - - if (src_sel == 0) - goto set_parent_error; - - field_val = omap2_get_src_field(&src_sel, src_off, new_parent, - &field_mask); - - reg = (void __iomem *)src_sel; - - if (clk->usecount > 0) - _omap2_clk_disable(clk); - - /* Set new source value (previous dividers if any in effect) */ - reg_val = __raw_readl(reg) & ~(field_mask << src_off); - reg_val |= (field_val << src_off); - __raw_writel(reg_val, reg); - wmb(); + const struct clksel *clks; + const struct clksel_rate *clkr; - if (clk->flags & DELAYED_APP) { - __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); - wmb(); - } - if (clk->usecount > 0) - _omap2_clk_enable(clk); - - clk->parent = new_parent; + *parent_div = 0; + *src_addr = 0; - /* SRC_RATE_SEL_MASK clocks follow their parents rates.*/ - if ((new_parent == &core_ck) && (clk == &dss1_fck)) - clk->rate = new_parent->rate / 0x10; - else - clk->rate = new_parent->rate; + clks = omap2_get_clksel_by_parent(clk, src_clk); + if (clks == NULL) + return 0; - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); + for (clkr = clks->rates; clkr->div; clkr++) { + if (clkr->flags & (cpu_mask | DEFAULT_RATE)) + break; /* Found the default rate for this platform */ + } + if (!clkr->div) { + printk(KERN_ERR "clock: Could not find default rate for " + "clock %s parent %s\n", clk->name, + src_clk->parent->name); return 0; - } else { - clk->parent = new_parent; - rate = new_parent->rate; - omap2_clk_set_rate(clk, rate); - ret = 0; } - set_parent_error: - return ret; + /* Should never happen. Add a clksel mask to the struct clk. */ + WARN_ON(clk->clksel_mask == 0); + + *field_mask = clk->clksel_mask; + *src_addr = clk->clksel_reg; + *parent_div = clkr->div; + + return clkr->val; } -/* Sets basic clocks based on the specified rate */ -static int omap2_select_table_rate(struct clk * clk, unsigned long rate) +int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) { - u32 flags, cur_rate, done_rate, bypass = 0; - u8 cpu_mask = 0; - struct prcm_config *prcm; - unsigned long found_speed = 0; + void __iomem *src_addr; + u32 field_val, field_mask, reg_val, parent_div; - if (clk != &virt_prcm_set) + if (unlikely(clk->flags & CONFIG_PARTICIPANT)) return -EINVAL; - /* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */ - if (cpu_is_omap2420()) - cpu_mask = RATE_IN_242X; - else if (cpu_is_omap2430()) - cpu_mask = RATE_IN_243X; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - - if (prcm->xtal_speed != sys_ck.rate) - continue; - - if (prcm->mpu_speed <= rate) { - found_speed = prcm->mpu_speed; - break; - } - } - - if (!found_speed) { - printk(KERN_INFO "Could not set MPU rate to %luMHz\n", - rate / 1000000); + if (!clk->clksel) return -EINVAL; - } - - curr_prcm_set = prcm; - cur_rate = omap2_get_dpll_rate(&dpll_ck); - - if (prcm->dpll_speed == cur_rate / 2) { - omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); - } else if (prcm->dpll_speed == cur_rate * 2) { - omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); - } else if (prcm->dpll_speed != cur_rate) { - local_irq_save(flags); - if (prcm->dpll_speed == prcm->xtal_speed) - bypass = 1; + field_val = omap2_clksel_get_src_field(&src_addr, new_parent, + &field_mask, clk, &parent_div); + if (src_addr == 0) + return -EINVAL; - if ((prcm->cm_clksel2_pll & 0x3) == 2) - done_rate = PRCM_FULL_SPEED; - else - done_rate = PRCM_HALF_SPEED; + if (clk->usecount > 0) + _omap2_clk_disable(clk); - /* MPU divider */ - CM_CLKSEL_MPU = prcm->cm_clksel_mpu; + /* Set new source value (previous dividers if any in effect) */ + reg_val = __raw_readl(src_addr) & ~field_mask; + reg_val |= (field_val << __ffs(field_mask)); + __raw_writel(reg_val, src_addr); + wmb(); - /* dsp + iva1 div(2420), iva2.1(2430) */ - CM_CLKSEL_DSP = prcm->cm_clksel_dsp; + if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) { + __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL); + wmb(); + } - CM_CLKSEL_GFX = prcm->cm_clksel_gfx; + if (clk->usecount > 0) + _omap2_clk_enable(clk); - /* Major subsystem dividers */ - CM_CLKSEL1_CORE = prcm->cm_clksel1_core; - if (cpu_is_omap2430()) - CM_CLKSEL_MDM = prcm->cm_clksel_mdm; + clk->parent = new_parent; - /* x2 to enter init_mem */ - omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + /* CLKSEL clocks follow their parents' rates, divided by a divisor */ + clk->rate = new_parent->rate; - omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, - bypass); + if (parent_div > 0) + clk->rate /= parent_div; - omap2_init_memory_params(omap2_dll_force_needed()); - omap2_reprogram_sdrc(done_rate, 0); + pr_debug("clock: set parent of %s to %s (new rate %ld)\n", + clk->name, clk->parent->name, clk->rate); - local_irq_restore(flags); - } - omap2_clksel_recalc(&dpll_ck); + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); return 0; } @@ -1027,150 +728,17 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate) *-------------------------------------------------------------------------*/ #ifdef CONFIG_OMAP_RESET_CLOCKS -static void __init omap2_clk_disable_unused(struct clk *clk) +void omap2_clk_disable_unused(struct clk *clk) { - u32 regval32; + u32 regval32, v; + + v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0; regval32 = __raw_readl(clk->enable_reg); - if ((regval32 & (1 << clk->enable_bit)) == 0) + if ((regval32 & (1 << clk->enable_bit)) == v) return; printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); _omap2_clk_disable(clk); } -#else -#define omap2_clk_disable_unused NULL #endif - -static struct clk_functions omap2_clk_functions = { - .clk_enable = omap2_clk_enable, - .clk_disable = omap2_clk_disable, - .clk_round_rate = omap2_clk_round_rate, - .clk_set_rate = omap2_clk_set_rate, - .clk_set_parent = omap2_clk_set_parent, - .clk_disable_unused = omap2_clk_disable_unused, -}; - -static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) -{ - u32 div, aplls, sclk = 13000000; - - aplls = CM_CLKSEL1_PLL; - aplls &= ((1 << 23) | (1 << 24) | (1 << 25)); - aplls >>= 23; /* Isolate field, 0,2,3 */ - - if (aplls == 0) - sclk = 19200000; - else if (aplls == 2) - sclk = 13000000; - else if (aplls == 3) - sclk = 12000000; - - div = PRCM_CLKSRC_CTRL; - div &= ((1 << 7) | (1 << 6)); - div >>= sys->rate_offset; - - osc->rate = sclk * div; - sys->rate = sclk; -} - -/* - * Set clocks for bypass mode for reboot to work. - */ -void omap2_clk_prepare_for_reboot(void) -{ - u32 rate; - - if (vclk == NULL || sclk == NULL) - return; - - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); -} - -/* - * Switch the MPU rate if specified on cmdline. - * We cannot do this early until cmdline is parsed. - */ -static int __init omap2_clk_arch_init(void) -{ - if (!mpurate) - return -EINVAL; - - if (omap2_select_table_rate(&virt_prcm_set, mpurate)) - printk(KERN_ERR "Could not find matching MPU rate\n"); - - propagate_rate(&osc_ck); /* update main root fast */ - propagate_rate(&func_32k_ck); /* update main root slow */ - - printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; - - return 0; -} -arch_initcall(omap2_clk_arch_init); - -int __init omap2_clk_init(void) -{ - struct prcm_config *prcm; - struct clk ** clkp; - u32 clkrate; - - clk_init(&omap2_clk_functions); - omap2_get_crystal_rate(&osc_ck, &sys_ck); - - for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); - clkp++) { - - if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) { - clk_register(*clkp); - continue; - } - - if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) { - clk_register(*clkp); - continue; - } - } - - /* Check the MPU rate set by bootloader */ - clkrate = omap2_get_dpll_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; - - propagate_rate(&osc_ck); /* update main root fast */ - propagate_rate(&func_32k_ck); /* update main root slow */ - - printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable(&sync_32k_ick); - clk_enable(&omapctrl_ick); - - /* Force the APLLs always active. The clocks are idled - * automatically by hardware. */ - clk_enable(&apll96_ck); - clk_enable(&apll54_ck); - - if (cpu_is_omap2430()) - clk_enable(&sdrc_ick); - - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - - return 0; -} diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 4f791866b910..d5980a9e09a4 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -1,13 +1,12 @@ /* - * linux/arch/arm/mach-omap24xx/clock.h + * linux/arch/arm/mach-omap2/clock.h * - * Copyright (C) 2005 Texas Instruments Inc. - * Richard Woodruff <r-woodruff2@ti.com> - * Created for OMAP2. + * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2004-2008 Nokia Corporation * - * Copyright (C) 2004 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,2095 +16,53 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H #define __ARCH_ARM_MACH_OMAP2_CLOCK_H -static void omap2_sys_clk_recalc(struct clk * clk); -static void omap2_clksel_recalc(struct clk * clk); -static void omap2_followparent_recalc(struct clk * clk); -static void omap2_propagate_rate(struct clk * clk); -static void omap2_mpu_recalc(struct clk * clk); -static int omap2_select_table_rate(struct clk * clk, unsigned long rate); -static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate); -static void omap2_clk_disable(struct clk *clk); -static void omap2_sys_clk_recalc(struct clk * clk); -static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val); -static u32 omap2_clksel_get_divisor(struct clk *clk); - - -#define RATE_IN_242X (1 << 0) -#define RATE_IN_243X (1 << 1) - -/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP - * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM - */ -struct prcm_config { - unsigned long xtal_speed; /* crystal rate */ - unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ - unsigned long mpu_speed; /* speed of MPU */ - unsigned long cm_clksel_mpu; /* mpu divider */ - unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ - unsigned long cm_clksel_gfx; /* gfx dividers */ - unsigned long cm_clksel1_core; /* major subsystem dividers */ - unsigned long cm_clksel1_pll; /* m,n */ - unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ - unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ - unsigned long base_sdrc_rfr; /* base refresh timing for a set */ - unsigned char flags; -}; - -/* Mask for clksel which support parent settign in set_rate */ -#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \ - CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1) - -/* Mask for clksel regs which support rate operations */ -#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \ - CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \ - CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \ - CM_SYSCLKOUT_SEL1) - -/* - * The OMAP2 processor can be run at several discrete 'PRCM configurations'. - * These configurations are characterized by voltage and speed for clocks. - * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with - * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. - * - * 2430 differs from 2420 in that there are no more phase synchronizers used. - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs - * 2430 (iva2.1, NOdsp, mdm) - */ - -/* Core fields for cm_clksel, not ratio governed */ -#define RX_CLKSEL_DSS1 (0x10 << 8) -#define RX_CLKSEL_DSS2 (0x0 << 13) -#define RX_CLKSEL_SSI (0x5 << 20) - -/*------------------------------------------------------------------------- - * Voltage/DPLL ratios - *-------------------------------------------------------------------------*/ - -/* 2430 Ratio's, 2430-Ratio Config 1 */ -#define R1_CLKSEL_L3 (4 << 0) -#define R1_CLKSEL_L4 (2 << 5) -#define R1_CLKSEL_USB (4 << 25) -#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R1_CLKSEL_L4 | R1_CLKSEL_L3 -#define R1_CLKSEL_MPU (2 << 0) -#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU -#define R1_CLKSEL_DSP (2 << 0) -#define R1_CLKSEL_DSP_IF (2 << 5) -#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF -#define R1_CLKSEL_GFX (2 << 0) -#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX -#define R1_CLKSEL_MDM (4 << 0) -#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM - -/* 2430-Ratio Config 2 */ -#define R2_CLKSEL_L3 (6 << 0) -#define R2_CLKSEL_L4 (2 << 5) -#define R2_CLKSEL_USB (2 << 25) -#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R2_CLKSEL_L4 | R2_CLKSEL_L3 -#define R2_CLKSEL_MPU (2 << 0) -#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU -#define R2_CLKSEL_DSP (2 << 0) -#define R2_CLKSEL_DSP_IF (3 << 5) -#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF -#define R2_CLKSEL_GFX (2 << 0) -#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX -#define R2_CLKSEL_MDM (6 << 0) -#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM - -/* 2430-Ratio Bootm (BYPASS) */ -#define RB_CLKSEL_L3 (1 << 0) -#define RB_CLKSEL_L4 (1 << 5) -#define RB_CLKSEL_USB (1 << 25) -#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RB_CLKSEL_L4 | RB_CLKSEL_L3 -#define RB_CLKSEL_MPU (1 << 0) -#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU -#define RB_CLKSEL_DSP (1 << 0) -#define RB_CLKSEL_DSP_IF (1 << 5) -#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF -#define RB_CLKSEL_GFX (1 << 0) -#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX -#define RB_CLKSEL_MDM (1 << 0) -#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM - -/* 2420 Ratio Equivalents */ -#define RXX_CLKSEL_VLYNQ (0x12 << 15) -#define RXX_CLKSEL_SSI (0x8 << 20) - -/* 2420-PRCM III 532MHz core */ -#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ -#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ -#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ -#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ - RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ - RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ - RIII_CLKSEL_L3 -#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ -#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU -#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ -#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ -#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ -#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ -#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ -#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ - RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ - RIII_CLKSEL_DSP -#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ -#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX - -/* 2420-PRCM II 600MHz core */ -#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ -#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ -#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ -#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RII_CLKSEL_L4 | RII_CLKSEL_L3 -#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ -#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU -#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ -#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ -#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ -#define RII_CLKSEL_IVA (6 << 8) /* iva1 - 200MHz */ -#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ -#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ - RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ - RII_CLKSEL_DSP -#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ -#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX - -/* 2420-PRCM VII (boot) */ -#define RVII_CLKSEL_L3 (1 << 0) -#define RVII_CLKSEL_L4 (1 << 5) -#define RVII_CLKSEL_DSS1 (1 << 8) -#define RVII_CLKSEL_DSS2 (0 << 13) -#define RVII_CLKSEL_VLYNQ (1 << 15) -#define RVII_CLKSEL_SSI (1 << 20) -#define RVII_CLKSEL_USB (1 << 25) - -#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ - RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ - RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 - -#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ -#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU +#include <asm/arch/clock.h> -#define RVII_CLKSEL_DSP (1 << 0) -#define RVII_CLKSEL_DSP_IF (1 << 5) -#define RVII_SYNC_DSP (0 << 7) -#define RVII_CLKSEL_IVA (1 << 8) -#define RVII_SYNC_IVA (0 << 13) -#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ - RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP - -#define RVII_CLKSEL_GFX (1 << 0) -#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX - -/*------------------------------------------------------------------------- - * 2430 Target modes: Along with each configuration the CPU has several - * modes which goes along with them. Modes mainly are the addition of - * describe DPLL combinations to go along with a ratio. - *-------------------------------------------------------------------------*/ - -/* Hardware governed */ -#define MX_48M_SRC (0 << 3) -#define MX_54M_SRC (0 << 5) -#define MX_APLLS_CLIKIN_12 (3 << 23) -#define MX_APLLS_CLIKIN_13 (2 << 23) -#define MX_APLLS_CLIKIN_19_2 (0 << 23) - -/* - * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed - * #2 (ratio1) baseport-target - * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz - */ -#define M5A_DPLL_MULT_12 (133 << 12) -#define M5A_DPLL_DIV_12 (5 << 8) -#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5A_DPLL_MULT_13 (266 << 12) -#define M5A_DPLL_DIV_13 (12 << 8) -#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5A_DPLL_MULT_19 (180 << 12) -#define M5A_DPLL_DIV_19 (12 << 8) -#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ -#define M5B_DPLL_MULT_12 (50 << 12) -#define M5B_DPLL_DIV_12 (2 << 8) -#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5B_DPLL_MULT_13 (200 << 12) -#define M5B_DPLL_DIV_13 (12 << 8) - -#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5B_DPLL_MULT_19 (125 << 12) -#define M5B_DPLL_DIV_19 (31 << 8) -#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* - * #4 (ratio2) - * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz - */ -#define M3_DPLL_MULT_12 (55 << 12) -#define M3_DPLL_DIV_12 (1 << 8) -#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M3_DPLL_MULT_13 (330 << 12) -#define M3_DPLL_DIV_13 (12 << 8) -#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M3_DPLL_MULT_19 (275 << 12) -#define M3_DPLL_DIV_19 (15 << 8) -#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* boot (boot) */ -#define MB_DPLL_MULT (1 << 12) -#define MB_DPLL_DIV (0 << 8) -#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_12 - -#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_13 - -#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_19 - -/* - * 2430 - chassis (sedna) - * 165 (ratio1) same as above #2 - * 150 (ratio1) - * 133 (ratio2) same as above #4 - * 110 (ratio2) same as above #3 - * 104 (ratio2) - * boot (boot) - */ - -/* - * 2420 Equivalent - mode registers - * PRCM II , target DPLL = 2*300MHz = 600MHz - */ -#define MII_DPLL_MULT_12 (50 << 12) -#define MII_DPLL_DIV_12 (1 << 8) -#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MII_DPLL_MULT_13 (300 << 12) -#define MII_DPLL_DIV_13 (12 << 8) -#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM III target DPLL = 2*266 = 532MHz*/ -#define MIII_DPLL_MULT_12 (133 << 12) -#define MIII_DPLL_DIV_12 (5 << 8) -#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MIII_DPLL_MULT_13 (266 << 12) -#define MIII_DPLL_DIV_13 (12 << 8) -#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM VII (boot bypass) */ -#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL -#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL - -/* High and low operation value */ -#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) -#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) - -/* - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define V24XX_SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define V24XX_SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define V24XX_SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define V24XX_SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - -/* MPU speed defines */ -#define S12M 12000000 -#define S13M 13000000 -#define S19M 19200000 -#define S26M 26000000 -#define S100M 100000000 -#define S133M 133000000 -#define S150M 150000000 -#define S165M 165000000 -#define S200M 200000000 -#define S266M 266000000 -#define S300M 300000000 -#define S330M 330000000 -#define S400M 400000000 -#define S532M 532000000 -#define S600M 600000000 -#define S660M 660000000 - -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, - * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, - * CM_CLKSEL2_PLL, CM_CLKSEL_MDM - * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. - * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. - * - * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ -static struct prcm_config rate_table[] = { - /* PRCM II - FAST */ - {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - FAST */ - {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM II - SLOW */ - {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - SLOW */ - {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM #3 - ratio2 (ES2) - FAST */ - {S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, - V24XX_SDRC_RFR_CTRL_110MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - FAST */ - {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - V24XX_SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - FAST */ - {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - V24XX_SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM #3 - ratio2 (ES2) - SLOW */ - {S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, - V24XX_SDRC_RFR_CTRL_110MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - SLOW */ - {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - V24XX_SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - SLOW*/ - {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - V24XX_SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - V24XX_SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - V24XX_SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; - -/*------------------------------------------------------------------------- - * 24xx clock tree. - * - * NOTE:In many cases here we are assigning a 'default' parent. In many - * cases the parent is selectable. The get/set parent calls will also - * switch sources. - * - * Many some clocks say always_enabled, but they can be auto idled for - * power savings. They will always be available upon clock request. - * - * Several sources are given initial rates which may be wrong, this will - * be fixed up in the init func. - * - * Things are broadly separated below by clock domains. It is - * noteworthy that most periferals have dependencies on multiple clock - * domains. Many get their interface clocks from the L4 domain, but get - * functional clocks from fixed sources or other core domain derived - * clocks. - *-------------------------------------------------------------------------*/ - -/* Base external input clocks */ -static struct clk func_32k_ck = { - .name = "func_32k_ck", - .rate = 32000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | ALWAYS_ENABLED, -}; - -/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ -static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ - .name = "osc_ck", - .rate = 26000000, /* fixed up in clock init */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES, -}; - -/* With out modem likely 12MHz, with modem likely 13MHz */ -static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ - .name = "sys_ck", /* ~ ref_clk also */ - .parent = &osc_ck, - .rate = 13000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, - .rate_offset = 6, /* sysclkdiv 1 or 2, already handled or no boot */ - .recalc = &omap2_sys_clk_recalc, -}; - -static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ - .name = "alt_ck", - .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, - .recalc = &omap2_propagate_rate, -}; - -/* - * Analog domain root source clocks - */ - -/* dpll_ck, is broken out in to special cases through clksel */ -static struct clk dpll_ck = { - .name = "dpll_ck", - .parent = &sys_ck, /* Can be func_32k also */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk apll96_ck = { - .name = "apll96_ck", - .parent = &sys_ck, - .rate = 96000000, - .flags = CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES, - .enable_reg = (void __iomem *)&CM_CLKEN_PLL, - .enable_bit = 0x2, - .recalc = &omap2_propagate_rate, -}; - -static struct clk apll54_ck = { - .name = "apll54_ck", - .parent = &sys_ck, - .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES, - .enable_reg = (void __iomem *)&CM_CLKEN_PLL, - .enable_bit = 0x6, - .recalc = &omap2_propagate_rate, -}; +int omap2_clk_enable(struct clk *clk); +void omap2_clk_disable(struct clk *clk); +long omap2_clk_round_rate(struct clk *clk, unsigned long rate); +int omap2_clk_set_rate(struct clk *clk, unsigned long rate); +int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent); -/* - * PRCM digital base sources - */ -static struct clk func_54m_ck = { - .name = "func_54m_ck", - .parent = &apll54_ck, /* can also be alt_clk */ - .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, - .src_offset = 5, - .enable_reg = (void __iomem *)&CM_CLKEN_PLL, - .enable_bit = 0xff, - .recalc = &omap2_propagate_rate, -}; - -static struct clk core_ck = { - .name = "core_ck", - .parent = &dpll_ck, /* can also be 32k */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | RATE_PROPAGATES, - .recalc = &omap2_propagate_rate, -}; - -static struct clk sleep_ck = { /* sys_clk or 32k */ - .name = "sleep_ck", - .parent = &func_32k_ck, - .rate = 32000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .recalc = &omap2_propagate_rate, -}; - -static struct clk func_96m_ck = { - .name = "func_96m_ck", - .parent = &apll96_ck, - .rate = 96000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES, - .enable_reg = (void __iomem *)&CM_CLKEN_PLL, - .enable_bit = 0xff, - .recalc = &omap2_propagate_rate, -}; - -static struct clk func_48m_ck = { - .name = "func_48m_ck", - .parent = &apll96_ck, /* 96M or Alt */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, - .src_offset = 3, - .enable_reg = (void __iomem *)&CM_CLKEN_PLL, - .enable_bit = 0xff, - .recalc = &omap2_propagate_rate, -}; - -static struct clk func_12m_ck = { - .name = "func_12m_ck", - .parent = &func_48m_ck, - .rate = 12000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES, - .recalc = &omap2_propagate_rate, - .enable_reg = (void __iomem *)&CM_CLKEN_PLL, - .enable_bit = 0xff, -}; - -/* Secure timer, only available in secure mode */ -static struct clk wdt1_osc_ck = { - .name = "ck_wdt1_osc", - .parent = &osc_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk sys_clkout = { - .name = "sys_clkout", - .parent = &func_54m_ck, - .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_SYSCLKOUT_SEL1 | RATE_CKCTL, - .src_offset = 0, - .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, - .enable_bit = 7, - .rate_offset = 3, - .recalc = &omap2_clksel_recalc, -}; - -/* In 2430, new in 2420 ES2 */ -static struct clk sys_clkout2 = { - .name = "sys_clkout2", - .parent = &func_54m_ck, - .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_SYSCLKOUT_SEL1 | RATE_CKCTL, - .src_offset = 8, - .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, - .enable_bit = 15, - .rate_offset = 11, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk emul_ck = { - .name = "emul_ck", - .parent = &func_54m_ck, - .flags = CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&PRCM_CLKEMUL_CTRL, - .enable_bit = 0, - .recalc = &omap2_propagate_rate, - -}; - -/* - * MPU clock domain - * Clocks: - * MPU_FCLK, MPU_ICLK - * INT_M_FCLK, INT_M_I_CLK - * - * - Individual clocks are hardware managed. - * - Base divider comes from: CM_CLKSEL_MPU - * - */ -static struct clk mpu_ck = { /* Control cpu */ - .name = "mpu_ck", - .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL | - ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP | - CONFIG_PARTICIPANT | RATE_PROPAGATES, - .rate_offset = 0, /* bits 0-4 */ - .recalc = &omap2_clksel_recalc, -}; - -/* - * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain - * Clocks: - * 2430: IVA2.1_FCLK, IVA2.1_ICLK - * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP - */ -static struct clk iva2_1_fck = { - .name = "iva2_1_fck", - .parent = &core_ck, - .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | - DELAYED_APP | RATE_PROPAGATES | - CONFIG_PARTICIPANT, - .rate_offset = 0, - .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, - .enable_bit = 0, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk iva2_1_ick = { - .name = "iva2_1_ick", - .parent = &iva2_1_fck, - .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | - DELAYED_APP | CONFIG_PARTICIPANT, - .rate_offset = 5, - .recalc = &omap2_clksel_recalc, -}; - -/* - * Won't be too specific here. The core clock comes into this block - * it is divided then tee'ed. One branch goes directly to xyz enable - * controls. The other branch gets further divided by 2 then possibly - * routed into a synchronizer and out of clocks abc. - */ -static struct clk dsp_fck = { - .name = "dsp_fck", - .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | - DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, - .rate_offset = 0, - .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, - .enable_bit = 0, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk dsp_ick = { - .name = "dsp_ick", /* apparently ipi and isp */ - .parent = &dsp_fck, - .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | - DELAYED_APP | CONFIG_PARTICIPANT, - .rate_offset = 5, - .enable_reg = (void __iomem *)&CM_ICLKEN_DSP, - .enable_bit = 1, /* for ipi */ - .recalc = &omap2_clksel_recalc, -}; - -static struct clk iva1_ifck = { - .name = "iva1_ifck", - .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL | - CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, - .rate_offset= 8, - .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, - .enable_bit = 10, - .recalc = &omap2_clksel_recalc, -}; - -/* IVA1 mpu/int/i/f clocks are /2 of parent */ -static struct clk iva1_mpu_int_ifck = { - .name = "iva1_mpu_int_ifck", - .parent = &iva1_ifck, - .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1, - .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, - .enable_bit = 8, - .recalc = &omap2_clksel_recalc, -}; - -/* - * L3 clock domain - * L3 clocks are used for both interface and functional clocks to - * multiple entities. Some of these clocks are completely managed - * by hardware, and some others allow software control. Hardware - * managed ones general are based on directly CLK_REQ signals and - * various auto idle settings. The functional spec sets many of these - * as 'tie-high' for their enables. - * - * I-CLOCKS: - * L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA - * CAM, HS-USB. - * F-CLOCK - * SSI. - * - * GPMC memories and SDRC have timing and clock sensitive registers which - * may very well need notification when the clock changes. Currently for low - * operating points, these are taken care of in sleep.S. - */ -static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ - .name = "core_l3_ck", - .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | - DELAYED_APP | CONFIG_PARTICIPANT | - RATE_PROPAGATES, - .rate_offset = 0, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk usb_l4_ick = { /* FS-USB interface clock */ - .name = "usb_l4_ick", - .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP | - CONFIG_PARTICIPANT, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 0, - .rate_offset = 25, - .recalc = &omap2_clksel_recalc, -}; - -/* - * SSI is in L3 management domain, its direct parent is core not l3, - * many core power domain entities are grouped into the L3 clock - * domain. - * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK - * - * ssr = core/1/2/3/4/5, sst = 1/2 ssr. - */ -static struct clk ssi_ssr_sst_fck = { - .name = "ssi_fck", - .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, /* bit 1 */ - .enable_bit = 1, - .rate_offset = 20, - .recalc = &omap2_clksel_recalc, -}; - -/* - * GFX clock domain - * Clocks: - * GFX_FCLK, GFX_ICLK - * GFX_CG1(2d), GFX_CG2(3d) - * - * GFX_FCLK runs from L3, and is divided by (1,2,3,4) - * The 2d and 3d clocks run at a hardware determined - * divided value of fclk. - * - */ -static struct clk gfx_3d_fck = { - .name = "gfx_3d_fck", - .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_CKCTL | CM_GFX_SEL1, - .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, - .enable_bit = 2, - .rate_offset= 0, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gfx_2d_fck = { - .name = "gfx_2d_fck", - .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_CKCTL | CM_GFX_SEL1, - .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, - .enable_bit = 1, - .rate_offset= 0, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gfx_ick = { - .name = "gfx_ick", /* From l3 */ - .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_CKCTL, - .enable_reg = (void __iomem *)&CM_ICLKEN_GFX, /* bit 0 */ - .enable_bit = 0, - .recalc = &omap2_followparent_recalc, -}; - -/* - * Modem clock domain (2430) - * CLOCKS: - * MDM_OSC_CLK - * MDM_ICLK - */ -static struct clk mdm_ick = { /* used both as a ick and fck */ - .name = "mdm_ick", - .parent = &core_ck, - .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 | - DELAYED_APP | CONFIG_PARTICIPANT, - .rate_offset = 0, - .enable_reg = (void __iomem *)&CM_ICLKEN_MDM, - .enable_bit = 0, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mdm_osc_ck = { - .name = "mdm_osc_ck", - .rate = 26000000, - .parent = &osc_ck, - .flags = CLOCK_IN_OMAP243X | RATE_FIXED, - .enable_reg = (void __iomem *)&CM_FCLKEN_MDM, - .enable_bit = 1, - .recalc = &omap2_followparent_recalc, -}; - -/* - * L4 clock management domain - * - * This domain contains lots of interface clocks from the L4 interface, some - * functional clocks. Fixed APLL functional source clocks are managed in - * this domain. - */ -static struct clk l4_ck = { /* used both as an ick and fck */ - .name = "l4_ck", - .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | - DELAYED_APP | RATE_PROPAGATES, - .rate_offset = 5, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk ssi_l4_ick = { - .name = "ssi_l4_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, /* bit 1 */ - .enable_bit = 1, - .recalc = &omap2_followparent_recalc, -}; - -/* - * DSS clock domain - * CLOCKs: - * DSS_L4_ICLK, DSS_L3_ICLK, - * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK - * - * DSS is both initiator and target. - */ -static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ - .name = "dss_ick", - .parent = &l4_ck, /* really both l3 and l4 */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 0, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk dss1_fck = { - .name = "dss1_fck", - .parent = &core_ck, /* Core or sys */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 0, - .rate_offset = 8, - .src_offset = 8, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk dss2_fck = { /* Alt clk used in power management */ - .name = "dss2_fck", - .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED | - DELAYED_APP, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 1, - .src_offset = 13, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk dss_54m_fck = { /* Alt clk used in power management */ - .name = "dss_54m_fck", /* 54m tv clk */ - .parent = &func_54m_ck, - .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 2, - .recalc = &omap2_propagate_rate, -}; - -/* - * CORE power domain ICLK & FCLK defines. - * Many of the these can have more than one possible parent. Entries - * here will likely have an L4 interface parent, and may have multiple - * functional clock parents. - */ -static struct clk gpt1_ick = { - .name = "gpt1_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, /* Bit0 */ - .enable_bit = 0, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt1_fck = { - .name = "gpt1_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_WKUP_SEL1, - .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, /* Bit0 */ - .enable_bit = 0, - .src_offset = 0, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt2_ick = { - .name = "gpt2_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit4 */ - .enable_bit = 4, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt2_fck = { - .name = "gpt2_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 4, - .src_offset = 2, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt3_ick = { - .name = "gpt3_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit5 */ - .enable_bit = 5, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt3_fck = { - .name = "gpt3_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 5, - .src_offset = 4, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt4_ick = { - .name = "gpt4_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit6 */ - .enable_bit = 6, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt4_fck = { - .name = "gpt4_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 6, - .src_offset = 6, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt5_ick = { - .name = "gpt5_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit7 */ - .enable_bit = 7, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt5_fck = { - .name = "gpt5_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 7, - .src_offset = 8, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt6_ick = { - .name = "gpt6_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_bit = 8, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit8 */ - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt6_fck = { - .name = "gpt6_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 8, - .src_offset = 10, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt7_ick = { - .name = "gpt7_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit9 */ - .enable_bit = 9, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt7_fck = { - .name = "gpt7_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 9, - .src_offset = 12, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt8_ick = { - .name = "gpt8_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit10 */ - .enable_bit = 10, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt8_fck = { - .name = "gpt8_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 10, - .src_offset = 14, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt9_ick = { - .name = "gpt9_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 11, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt9_fck = { - .name = "gpt9_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 11, - .src_offset = 16, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt10_ick = { - .name = "gpt10_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 12, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt10_fck = { - .name = "gpt10_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 12, - .src_offset = 18, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt11_ick = { - .name = "gpt11_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 13, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt11_fck = { - .name = "gpt11_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 13, - .src_offset = 20, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt12_ick = { - .name = "gpt12_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit14 */ - .enable_bit = 14, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpt12_fck = { - .name = "gpt12_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - CM_CORE_SEL2, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 14, - .src_offset = 22, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp1_ick = { - .name = "mcbsp1_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_bit = 15, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit16 */ - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp1_fck = { - .name = "mcbsp1_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_bit = 15, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp2_ick = { - .name = "mcbsp2_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_bit = 16, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp2_fck = { - .name = "mcbsp2_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_bit = 16, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp3_ick = { - .name = "mcbsp3_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 3, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp3_fck = { - .name = "mcbsp3_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 3, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp4_ick = { - .name = "mcbsp4_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 4, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp4_fck = { - .name = "mcbsp4_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 4, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp5_ick = { - .name = "mcbsp5_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 5, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcbsp5_fck = { - .name = "mcbsp5_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 5, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcspi1_ick = { - .name = "mcspi_ick", - .id = 1, - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 17, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcspi1_fck = { - .name = "mcspi_fck", - .id = 1, - .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 17, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcspi2_ick = { - .name = "mcspi_ick", - .id = 2, - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 18, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcspi2_fck = { - .name = "mcspi_fck", - .id = 2, - .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 18, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcspi3_ick = { - .name = "mcspi_ick", - .id = 3, - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 9, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mcspi3_fck = { - .name = "mcspi_fck", - .id = 3, - .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 9, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk uart1_ick = { - .name = "uart1_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 21, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk uart1_fck = { - .name = "uart1_fck", - .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 21, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk uart2_ick = { - .name = "uart2_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 22, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk uart2_fck = { - .name = "uart2_fck", - .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 22, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk uart3_ick = { - .name = "uart3_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 2, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk uart3_fck = { - .name = "uart3_fck", - .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 2, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpios_ick = { - .name = "gpios_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, - .enable_bit = 2, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk gpios_fck = { - .name = "gpios_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, - .enable_bit = 2, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mpu_wdt_ick = { - .name = "mpu_wdt_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, - .enable_bit = 3, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mpu_wdt_fck = { - .name = "mpu_wdt_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, - .enable_bit = 3, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk sync_32k_ick = { - .name = "sync_32k_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, - .enable_bit = 1, - .recalc = &omap2_followparent_recalc, -}; -static struct clk wdt1_ick = { - .name = "wdt1_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, - .enable_bit = 4, - .recalc = &omap2_followparent_recalc, -}; -static struct clk omapctrl_ick = { - .name = "omapctrl_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, - .enable_bit = 5, - .recalc = &omap2_followparent_recalc, -}; -static struct clk icr_ick = { - .name = "icr_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, - .enable_bit = 6, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk cam_ick = { - .name = "cam_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 31, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk cam_fck = { - .name = "cam_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 31, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mailboxes_ick = { - .name = "mailboxes_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 30, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk wdt4_ick = { - .name = "wdt4_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 29, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk wdt4_fck = { - .name = "wdt4_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 29, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk wdt3_ick = { - .name = "wdt3_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 28, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk wdt3_fck = { - .name = "wdt3_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 28, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mspro_ick = { - .name = "mspro_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 27, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mspro_fck = { - .name = "mspro_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 27, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mmc_ick = { - .name = "mmc_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 26, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mmc_fck = { - .name = "mmc_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 26, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk fac_ick = { - .name = "fac_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 25, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk fac_fck = { - .name = "fac_fck", - .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 25, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk eac_ick = { - .name = "eac_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 24, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk eac_fck = { - .name = "eac_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 24, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk hdq_ick = { - .name = "hdq_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 23, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk hdq_fck = { - .name = "hdq_fck", - .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 23, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk i2c2_ick = { - .name = "i2c_ick", - .id = 2, - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 20, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk i2c2_fck = { - .name = "i2c_fck", - .id = 2, - .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 20, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk i2chs2_fck = { - .name = "i2chs2_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 20, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk i2c1_ick = { - .name = "i2c_ick", - .id = 1, - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 19, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk i2c1_fck = { - .name = "i2c_fck", - .id = 1, - .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 19, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk i2chs1_fck = { - .name = "i2chs1_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 19, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk vlynq_ick = { - .name = "vlynq_ick", - .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, - .enable_bit = 3, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk vlynq_fck = { - .name = "vlynq_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, - .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, - .enable_bit = 3, - .src_offset = 15, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk sdrc_ick = { - .name = "sdrc_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN3_CORE, - .enable_bit = 2, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk des_ick = { - .name = "des_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, - .enable_bit = 0, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk sha_ick = { - .name = "sha_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, - .enable_bit = 1, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk rng_ick = { - .name = "rng_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, - .enable_bit = 2, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk aes_ick = { - .name = "aes_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, - .enable_bit = 3, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk pka_ick = { - .name = "pka_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, - .enable_bit = 4, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk usb_fck = { - .name = "usb_fck", - .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 0, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk usbhs_ick = { - .name = "usbhs_ick", - .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 6, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mmchs1_ick = { - .name = "mmchs1_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 7, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mmchs1_fck = { - .name = "mmchs1_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 7, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mmchs2_ick = { - .name = "mmchs2_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 8, - .recalc = &omap2_followparent_recalc, -}; - -static struct clk mmchs2_fck = { - .name = "mmchs2_fck", - .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 8, - .recalc = &omap2_followparent_recalc, -}; +#ifdef CONFIG_OMAP_RESET_CLOCKS +void omap2_clk_disable_unused(struct clk *clk); +#else +#define omap2_clk_disable_unused NULL +#endif -static struct clk gpio5_ick = { - .name = "gpio5_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 10, - .recalc = &omap2_followparent_recalc, -}; +void omap2_clksel_recalc(struct clk *clk); +void omap2_init_clksel_parent(struct clk *clk); +u32 omap2_clksel_get_divisor(struct clk *clk); +u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, + u32 *new_div); +u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val); +u32 omap2_divisor_to_clksel(struct clk *clk, u32 div); +void omap2_fixed_divisor_recalc(struct clk *clk); +long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate); +int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); +u32 omap2_get_dpll_rate(struct clk *clk); +int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); -static struct clk gpio5_fck = { - .name = "gpio5_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 10, - .recalc = &omap2_followparent_recalc, -}; +extern u8 cpu_mask; -static struct clk mdm_intc_ick = { - .name = "mdm_intc_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, - .enable_bit = 11, - .recalc = &omap2_followparent_recalc, +/* clksel_rate data common to 24xx/343x */ +static const struct clksel_rate gpt_32k_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } }; -static struct clk mmchsdb1_fck = { - .name = "mmchsdb1_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 16, - .recalc = &omap2_followparent_recalc, +static const struct clksel_rate gpt_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } }; -static struct clk mmchsdb2_fck = { - .name = "mmchsdb2_fck", - .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP243X, - .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, - .enable_bit = 17, - .recalc = &omap2_followparent_recalc, +static const struct clksel_rate gfx_l3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X }, + { .div = 0 } }; -/* - * This clock is a composite clock which does entire set changes then - * forces a rebalance. It keys on the MPU speed, but it really could - * be any key speed part of a set in the rate table. - * - * to really change a set, you need memory table sets which get changed - * in sram, pre-notifiers & post notifiers, changing the top set, without - * having low level display recalc's won't work... this is why dpm notifiers - * work, isr's off, walk a list of clocks already _off_ and not messing with - * the bus. - * - * This clock should have no parent. It embodies the entire upper level - * active set. A parent will mess up some of the init also. - */ -static struct clk virt_prcm_set = { - .name = "virt_prcm_set", - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, - .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ - .recalc = &omap2_mpu_recalc, /* sets are keyed on mpu rate */ - .set_rate = &omap2_select_table_rate, - .round_rate = &omap2_round_to_table_rate, -}; - -static struct clk *onchip_clks[] = { - /* external root sources */ - &func_32k_ck, - &osc_ck, - &sys_ck, - &alt_ck, - /* internal analog sources */ - &dpll_ck, - &apll96_ck, - &apll54_ck, - /* internal prcm root sources */ - &func_54m_ck, - &core_ck, - &sleep_ck, - &func_96m_ck, - &func_48m_ck, - &func_12m_ck, - &wdt1_osc_ck, - &sys_clkout, - &sys_clkout2, - &emul_ck, - /* mpu domain clocks */ - &mpu_ck, - /* dsp domain clocks */ - &iva2_1_fck, /* 2430 */ - &iva2_1_ick, - &dsp_ick, /* 2420 */ - &dsp_fck, - &iva1_ifck, - &iva1_mpu_int_ifck, - /* GFX domain clocks */ - &gfx_3d_fck, - &gfx_2d_fck, - &gfx_ick, - /* Modem domain clocks */ - &mdm_ick, - &mdm_osc_ck, - /* DSS domain clocks */ - &dss_ick, - &dss1_fck, - &dss2_fck, - &dss_54m_fck, - /* L3 domain clocks */ - &core_l3_ck, - &ssi_ssr_sst_fck, - &usb_l4_ick, - /* L4 domain clocks */ - &l4_ck, /* used as both core_l4 and wu_l4 */ - &ssi_l4_ick, - /* virtual meta-group clock */ - &virt_prcm_set, - /* general l4 interface ck, multi-parent functional clk */ - &gpt1_ick, - &gpt1_fck, - &gpt2_ick, - &gpt2_fck, - &gpt3_ick, - &gpt3_fck, - &gpt4_ick, - &gpt4_fck, - &gpt5_ick, - &gpt5_fck, - &gpt6_ick, - &gpt6_fck, - &gpt7_ick, - &gpt7_fck, - &gpt8_ick, - &gpt8_fck, - &gpt9_ick, - &gpt9_fck, - &gpt10_ick, - &gpt10_fck, - &gpt11_ick, - &gpt11_fck, - &gpt12_ick, - &gpt12_fck, - &mcbsp1_ick, - &mcbsp1_fck, - &mcbsp2_ick, - &mcbsp2_fck, - &mcbsp3_ick, - &mcbsp3_fck, - &mcbsp4_ick, - &mcbsp4_fck, - &mcbsp5_ick, - &mcbsp5_fck, - &mcspi1_ick, - &mcspi1_fck, - &mcspi2_ick, - &mcspi2_fck, - &mcspi3_ick, - &mcspi3_fck, - &uart1_ick, - &uart1_fck, - &uart2_ick, - &uart2_fck, - &uart3_ick, - &uart3_fck, - &gpios_ick, - &gpios_fck, - &mpu_wdt_ick, - &mpu_wdt_fck, - &sync_32k_ick, - &wdt1_ick, - &omapctrl_ick, - &icr_ick, - &cam_fck, - &cam_ick, - &mailboxes_ick, - &wdt4_ick, - &wdt4_fck, - &wdt3_ick, - &wdt3_fck, - &mspro_ick, - &mspro_fck, - &mmc_ick, - &mmc_fck, - &fac_ick, - &fac_fck, - &eac_ick, - &eac_fck, - &hdq_ick, - &hdq_fck, - &i2c1_ick, - &i2c1_fck, - &i2chs1_fck, - &i2c2_ick, - &i2c2_fck, - &i2chs2_fck, - &vlynq_ick, - &vlynq_fck, - &sdrc_ick, - &des_ick, - &sha_ick, - &rng_ick, - &aes_ick, - &pka_ick, - &usb_fck, - &usbhs_ick, - &mmchs1_ick, - &mmchs1_fck, - &mmchs2_ick, - &mmchs2_fck, - &gpio5_ick, - &gpio5_fck, - &mdm_intc_ick, - &mmchsdb1_fck, - &mmchsdb2_fck, -}; #endif diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c new file mode 100644 index 000000000000..ece32d8acba4 --- /dev/null +++ b/arch/arm/mach-omap2/clock24xx.c @@ -0,0 +1,539 @@ +/* + * linux/arch/arm/mach-omap2/clock.c + * + * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2004-2008 Nokia Corporation + * + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley + * + * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, + * Gordon McNutt and RidgeRun, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> + +#include <linux/io.h> +#include <linux/cpufreq.h> + +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> +#include <asm/div64.h> +#include <asm/bitops.h> + +#include "memory.h" +#include "clock.h" +#include "clock24xx.h" +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" + +/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ +#define EN_APLL_STOPPED 0 +#define EN_APLL_LOCKED 3 + +/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ +#define APLLS_CLKIN_19_2MHZ 0 +#define APLLS_CLKIN_13MHZ 2 +#define APLLS_CLKIN_12MHZ 3 + +/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ + +static struct prcm_config *curr_prcm_set; +static struct clk *vclk; +static struct clk *sclk; + +/*------------------------------------------------------------------------- + * Omap24xx specific clock functions + *-------------------------------------------------------------------------*/ + +/* This actually returns the rate of core_ck, not dpll_ck. */ +static u32 omap2_get_dpll_rate_24xx(struct clk *tclk) +{ + long long dpll_clk; + u8 amult; + + dpll_clk = omap2_get_dpll_rate(tclk); + + amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + amult &= OMAP24XX_CORE_CLK_SRC_MASK; + dpll_clk *= amult; + + return dpll_clk; +} + +static int omap2_enable_osc_ck(struct clk *clk) +{ + u32 pcc; + + pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + + __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, + OMAP24XX_PRCM_CLKSRC_CTRL); + + return 0; +} + +static void omap2_disable_osc_ck(struct clk *clk) +{ + u32 pcc; + + pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + + __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, + OMAP24XX_PRCM_CLKSRC_CTRL); +} + +#ifdef OLD_CK +/* Recalculate SYST_CLK */ +static void omap2_sys_clk_recalc(struct clk * clk) +{ + u32 div = PRCM_CLKSRC_CTRL; + div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ + div >>= clk->rate_offset; + clk->rate = (clk->parent->rate / div); + propagate_rate(clk); +} +#endif /* OLD_CK */ + +/* Enable an APLL if off */ +static int omap2_clk_fixed_enable(struct clk *clk) +{ + u32 cval, apll_mask; + + apll_mask = EN_APLL_LOCKED << clk->enable_bit; + + cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); + + if ((cval & apll_mask) == apll_mask) + return 0; /* apll already enabled */ + + cval &= ~apll_mask; + cval |= apll_mask; + cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); + + if (clk == &apll96_ck) + cval = OMAP24XX_ST_96M_APLL; + else if (clk == &apll54_ck) + cval = OMAP24XX_ST_54M_APLL; + + omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, + clk->name); + + /* + * REVISIT: Should we return an error code if omap2_wait_clock_ready() + * fails? + */ + return 0; +} + +/* Stop APLL */ +static void omap2_clk_fixed_disable(struct clk *clk) +{ + u32 cval; + + cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); + cval &= ~(EN_APLL_LOCKED << clk->enable_bit); + cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); +} + +/* + * Uses the current prcm set to tell if a rate is valid. + * You can go slower, but not faster within a given rate set. + */ +static u32 omap2_dpll_round_rate(unsigned long target_rate) +{ + u32 high, low, core_clk_src; + + core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK; + + if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */ + high = curr_prcm_set->dpll_speed * 2; + low = curr_prcm_set->dpll_speed; + } else { /* DPLL clockout x 2 */ + high = curr_prcm_set->dpll_speed; + low = curr_prcm_set->dpll_speed / 2; + } + +#ifdef DOWN_VARIABLE_DPLL + if (target_rate > high) + return high; + else + return target_rate; +#else + if (target_rate > low) + return high; + else + return low; +#endif + +} + +static void omap2_dpll_recalc(struct clk *clk) +{ + clk->rate = omap2_get_dpll_rate_24xx(clk); + + propagate_rate(clk); +} + +static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate) +{ + u32 cur_rate, low, mult, div, valid_rate, done_rate; + u32 bypass = 0; + struct prcm_config tmpset; + const struct dpll_data *dd; + unsigned long flags; + int ret = -EINVAL; + + local_irq_save(flags); + cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck); + mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + mult &= OMAP24XX_CORE_CLK_SRC_MASK; + + if ((rate == (cur_rate / 2)) && (mult == 2)) { + omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1); + } else if ((rate == (cur_rate * 2)) && (mult == 1)) { + omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); + } else if (rate != cur_rate) { + valid_rate = omap2_dpll_round_rate(rate); + if (valid_rate != rate) + goto dpll_exit; + + if (mult == 1) + low = curr_prcm_set->dpll_speed; + else + low = curr_prcm_set->dpll_speed / 2; + + dd = clk->dpll_data; + if (!dd) + goto dpll_exit; + + tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); + tmpset.cm_clksel1_pll &= ~(dd->mult_mask | + dd->div1_mask); + div = ((curr_prcm_set->xtal_speed / 1000000) - 1); + tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK; + if (rate > low) { + tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2; + mult = ((rate / 2) / 1000000); + done_rate = CORE_CLK_SRC_DPLL_X2; + } else { + tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL; + mult = (rate / 1000000); + done_rate = CORE_CLK_SRC_DPLL; + } + tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask)); + tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask)); + + /* Worst case */ + tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS; + + if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ + bypass = 1; + + omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */ + + /* Force dll lock mode */ + omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, + bypass); + + /* Errata: ret dll entry state */ + omap2_init_memory_params(omap2_dll_force_needed()); + omap2_reprogram_sdrc(done_rate, 0); + } + omap2_dpll_recalc(&dpll_ck); + ret = 0; + +dpll_exit: + local_irq_restore(flags); + return(ret); +} + +/** + * omap2_table_mpu_recalc - just return the MPU speed + * @clk: virt_prcm_set struct clk + * + * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. + */ +static void omap2_table_mpu_recalc(struct clk *clk) +{ + clk->rate = curr_prcm_set->mpu_speed; +} + +/* + * Look for a rate equal or less than the target rate given a configuration set. + * + * What's not entirely clear is "which" field represents the key field. + * Some might argue L3-DDR, others ARM, others IVA. This code is simple and + * just uses the ARM rates. + */ +static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) +{ + struct prcm_config *ptr; + long highest_rate; + + if (clk != &virt_prcm_set) + return -EINVAL; + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->mpu_speed; ptr++) { + if (!(ptr->flags & cpu_mask)) + continue; + if (ptr->xtal_speed != sys_ck.rate) + continue; + + highest_rate = ptr->mpu_speed; + + /* Can check only after xtal frequency check */ + if (ptr->mpu_speed <= rate) + break; + } + return highest_rate; +} + +/* Sets basic clocks based on the specified rate */ +static int omap2_select_table_rate(struct clk *clk, unsigned long rate) +{ + u32 cur_rate, done_rate, bypass = 0, tmp; + struct prcm_config *prcm; + unsigned long found_speed = 0; + unsigned long flags; + + if (clk != &virt_prcm_set) + return -EINVAL; + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + + if (prcm->xtal_speed != sys_ck.rate) + continue; + + if (prcm->mpu_speed <= rate) { + found_speed = prcm->mpu_speed; + break; + } + } + + if (!found_speed) { + printk(KERN_INFO "Could not set MPU rate to %luMHz\n", + rate / 1000000); + return -EINVAL; + } + + curr_prcm_set = prcm; + cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck); + + if (prcm->dpll_speed == cur_rate / 2) { + omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1); + } else if (prcm->dpll_speed == cur_rate * 2) { + omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); + } else if (prcm->dpll_speed != cur_rate) { + local_irq_save(flags); + + if (prcm->dpll_speed == prcm->xtal_speed) + bypass = 1; + + if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == + CORE_CLK_SRC_DPLL_X2) + done_rate = CORE_CLK_SRC_DPLL_X2; + else + done_rate = CORE_CLK_SRC_DPLL; + + /* MPU divider */ + cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); + + /* dsp + iva1 div(2420), iva2.1(2430) */ + cm_write_mod_reg(prcm->cm_clksel_dsp, + OMAP24XX_DSP_MOD, CM_CLKSEL); + + cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); + + /* Major subsystem dividers */ + tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; + cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1); + if (cpu_is_omap2430()) + cm_write_mod_reg(prcm->cm_clksel_mdm, + OMAP2430_MDM_MOD, CM_CLKSEL); + + /* x2 to enter init_mem */ + omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); + + omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, + bypass); + + omap2_init_memory_params(omap2_dll_force_needed()); + omap2_reprogram_sdrc(done_rate, 0); + + local_irq_restore(flags); + } + omap2_dpll_recalc(&dpll_ck); + + return 0; +} + +static struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, +}; + +static u32 omap2_get_apll_clkin(void) +{ + u32 aplls, sclk = 0; + + aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); + aplls &= OMAP24XX_APLLS_CLKIN_MASK; + aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; + + if (aplls == APLLS_CLKIN_19_2MHZ) + sclk = 19200000; + else if (aplls == APLLS_CLKIN_13MHZ) + sclk = 13000000; + else if (aplls == APLLS_CLKIN_12MHZ) + sclk = 12000000; + + return sclk; +} + +static u32 omap2_get_sysclkdiv(void) +{ + u32 div; + + div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + div &= OMAP_SYSCLKDIV_MASK; + div >>= OMAP_SYSCLKDIV_SHIFT; + + return div; +} + +static void omap2_osc_clk_recalc(struct clk *clk) +{ + clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv(); + propagate_rate(clk); +} + +static void omap2_sys_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate / omap2_get_sysclkdiv(); + propagate_rate(clk); +} + +/* + * Set clocks for bypass mode for reboot to work. + */ +void omap2_clk_prepare_for_reboot(void) +{ + u32 rate; + + if (vclk == NULL || sclk == NULL) + return; + + rate = clk_get_rate(sclk); + clk_set_rate(vclk, rate); +} + +/* + * Switch the MPU rate if specified on cmdline. + * We cannot do this early until cmdline is parsed. + */ +static int __init omap2_clk_arch_init(void) +{ + if (!mpurate) + return -EINVAL; + + if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + printk(KERN_ERR "Could not find matching MPU rate\n"); + + recalculate_root_clocks(); + + printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + return 0; +} +arch_initcall(omap2_clk_arch_init); + +int __init omap2_clk_init(void) +{ + struct prcm_config *prcm; + struct clk **clkp; + u32 clkrate; + + if (cpu_is_omap242x()) + cpu_mask = RATE_IN_242X; + else if (cpu_is_omap2430()) + cpu_mask = RATE_IN_243X; + + clk_init(&omap2_clk_functions); + + omap2_osc_clk_recalc(&osc_ck); + omap2_sys_clk_recalc(&sys_ck); + + for (clkp = onchip_24xx_clks; + clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks); + clkp++) { + + if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) { + clk_register(*clkp); + continue; + } + + if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) { + clk_register(*clkp); + continue; + } + } + + /* Check the MPU rate set by bootloader */ + clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; + + recalculate_root_clocks(); + + printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h new file mode 100644 index 000000000000..88081ed13f96 --- /dev/null +++ b/arch/arm/mach-omap2/clock24xx.h @@ -0,0 +1,2643 @@ +/* + * linux/arch/arm/mach-omap2/clock24xx.h + * + * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2004-2008 Nokia Corporation + * + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H + +#include "clock.h" + +#include "prm.h" +#include "cm.h" +#include "prm-regbits-24xx.h" +#include "cm-regbits-24xx.h" +#include "sdrc.h" + +static void omap2_table_mpu_recalc(struct clk *clk); +static int omap2_select_table_rate(struct clk *clk, unsigned long rate); +static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); +static void omap2_sys_clk_recalc(struct clk *clk); +static void omap2_osc_clk_recalc(struct clk *clk); +static void omap2_sys_clk_recalc(struct clk *clk); +static void omap2_dpll_recalc(struct clk *clk); +static int omap2_clk_fixed_enable(struct clk *clk); +static void omap2_clk_fixed_disable(struct clk *clk); +static int omap2_enable_osc_ck(struct clk *clk); +static void omap2_disable_osc_ck(struct clk *clk); +static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate); + +/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP + * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM + */ +struct prcm_config { + unsigned long xtal_speed; /* crystal rate */ + unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ + unsigned long mpu_speed; /* speed of MPU */ + unsigned long cm_clksel_mpu; /* mpu divider */ + unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ + unsigned long cm_clksel_gfx; /* gfx dividers */ + unsigned long cm_clksel1_core; /* major subsystem dividers */ + unsigned long cm_clksel1_pll; /* m,n */ + unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ + unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ + unsigned long base_sdrc_rfr; /* base refresh timing for a set */ + unsigned char flags; +}; + +/* + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + */ + +/* Core fields for cm_clksel, not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/*------------------------------------------------------------------------- + * Voltage/DPLL ratios + *-------------------------------------------------------------------------*/ + +/* 2430 Ratio's, 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R1_CLKSEL_L4 | R1_CLKSEL_L3 +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R2_CLKSEL_L4 | R2_CLKSEL_L3 +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Bootm (BYPASS) */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RB_CLKSEL_L4 | RB_CLKSEL_L3 +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2420 Ratio Equivalents */ +#define RXX_CLKSEL_VLYNQ (0x12 << 15) +#define RXX_CLKSEL_SSI (0x8 << 20) + +/* 2420-PRCM III 532MHz core */ +#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ +#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ +#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ +#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ + RIII_CLKSEL_L3 +#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ +#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU +#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ +#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ +#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ +#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ +#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ +#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ + RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ + RIII_CLKSEL_DSP +#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ +#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX + +/* 2420-PRCM II 600MHz core */ +#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ +#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ +#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ +#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ + RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RII_CLKSEL_L4 | RII_CLKSEL_L3 +#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ +#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU +#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ +#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ +#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ +#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ +#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ + RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ + RII_CLKSEL_DSP +#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ +#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX + +/* 2420-PRCM I 660MHz core */ +#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ +#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ +#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ +#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \ + RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RI_CLKSEL_L4 | RI_CLKSEL_L3 +#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ +#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU +#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ +#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ +#define RI_SYNC_DSP (1 << 7) /* Activate sync */ +#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ +#define RI_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \ + RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ + RI_CLKSEL_DSP +#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ +#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX + +/* 2420-PRCM VII (boot) */ +#define RVII_CLKSEL_L3 (1 << 0) +#define RVII_CLKSEL_L4 (1 << 5) +#define RVII_CLKSEL_DSS1 (1 << 8) +#define RVII_CLKSEL_DSS2 (0 << 13) +#define RVII_CLKSEL_VLYNQ (1 << 15) +#define RVII_CLKSEL_SSI (1 << 20) +#define RVII_CLKSEL_USB (1 << 25) + +#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ + RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ + RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 + +#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ +#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU + +#define RVII_CLKSEL_DSP (1 << 0) +#define RVII_CLKSEL_DSP_IF (1 << 5) +#define RVII_SYNC_DSP (0 << 7) +#define RVII_CLKSEL_IVA (1 << 8) +#define RVII_SYNC_IVA (0 << 13) +#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ + RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP + +#define RVII_CLKSEL_GFX (1 << 0) +#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX + +/*------------------------------------------------------------------------- + * 2430 Target modes: Along with each configuration the CPU has several + * modes which goes along with them. Modes mainly are the addition of + * describe DPLL combinations to go along with a ratio. + *-------------------------------------------------------------------------*/ + +/* Hardware governed */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* + * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed + * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz + */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M5A_DPLL_MULT_13 (61 << 12) +#define M5A_DPLL_DIV_13 (2 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M5A_DPLL_MULT_19 (55 << 12) +#define M5A_DPLL_DIV_19 (3 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* + * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz + */ +#define M4_DPLL_MULT_12 (133 << 12) +#define M4_DPLL_DIV_12 (3 << 8) +#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 + +#define M4_DPLL_MULT_13 (399 << 12) +#define M4_DPLL_DIV_13 (12 << 8) +#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +#define M4_DPLL_MULT_19 (145 << 12) +#define M4_DPLL_DIV_19 (6 << 8) +#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 + +/* + * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz + */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M3_DPLL_MULT_13 (76 << 12) +#define M3_DPLL_DIV_13 (2 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M3_DPLL_MULT_19 (17 << 12) +#define M3_DPLL_DIV_19 (0 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 + +/* + * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz + */ +#define M2_DPLL_MULT_12 (55 << 12) +#define M2_DPLL_DIV_12 (1 << 8) +#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 + +/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, + * relock time issue */ +/* Core frequency changed from 330/165 to 329/164 MHz*/ +#define M2_DPLL_MULT_13 (76 << 12) +#define M2_DPLL_DIV_13 (2 << 8) +#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +#define M2_DPLL_MULT_19 (17 << 12) +#define M2_DPLL_DIV_19 (0 << 8) +#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 + +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_12 + +#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_13 + +#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_19 + +/* + * 2430 - chassis (sedna) + * 165 (ratio1) same as above #2 + * 150 (ratio1) + * 133 (ratio2) same as above #4 + * 110 (ratio2) same as above #3 + * 104 (ratio2) + * boot (boot) + */ + +/* PRCM I target DPLL = 2*330MHz = 660MHz */ +#define MI_DPLL_MULT_12 (55 << 12) +#define MI_DPLL_DIV_12 (1 << 8) +#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 + +/* + * 2420 Equivalent - mode registers + * PRCM II , target DPLL = 2*300MHz = 600MHz + */ +#define MII_DPLL_MULT_12 (50 << 12) +#define MII_DPLL_DIV_12 (1 << 8) +#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define MII_DPLL_MULT_13 (300 << 12) +#define MII_DPLL_DIV_13 (12 << 8) +#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +/* PRCM III target DPLL = 2*266 = 532MHz*/ +#define MIII_DPLL_MULT_12 (133 << 12) +#define MIII_DPLL_DIV_12 (5 << 8) +#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define MIII_DPLL_MULT_13 (266 << 12) +#define MIII_DPLL_DIV_13 (12 << 8) +#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +/* PRCM VII (boot bypass) */ +#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL +#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL + +/* High and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* MPU speed defines */ +#define S12M 12000000 +#define S13M 13000000 +#define S19M 19200000 +#define S26M 26000000 +#define S100M 100000000 +#define S133M 133000000 +#define S150M 150000000 +#define S164M 164000000 +#define S165M 165000000 +#define S199M 199000000 +#define S200M 200000000 +#define S266M 266000000 +#define S300M 300000000 +#define S329M 329000000 +#define S330M 330000000 +#define S399M 399000000 +#define S400M 400000000 +#define S532M 532000000 +#define S600M 600000000 +#define S658M 658000000 +#define S660M 660000000 +#define S798M 798000000 + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +static struct prcm_config rate_table[] = { + /* PRCM I - FAST */ + {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, + RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, + RATE_IN_242X}, + + /* PRCM II - FAST */ + {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - FAST */ + {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM II - SLOW */ + {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - SLOW */ + {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM #4 - ratio2 (ES2.1) - FAST */ + {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - FAST */ + {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - FAST */ + {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - FAST */ + {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM #4 - ratio1 (ES2.1) - SLOW */ + {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - SLOW */ + {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - SLOW */ + {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - SLOW*/ + {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; + +/*------------------------------------------------------------------------- + * 24xx clock tree. + * + * NOTE:In many cases here we are assigning a 'default' parent. In many + * cases the parent is selectable. The get/set parent calls will also + * switch sources. + * + * Many some clocks say always_enabled, but they can be auto idled for + * power savings. They will always be available upon clock request. + * + * Several sources are given initial rates which may be wrong, this will + * be fixed up in the init func. + * + * Things are broadly separated below by clock domains. It is + * noteworthy that most periferals have dependencies on multiple clock + * domains. Many get their interface clocks from the L4 domain, but get + * functional clocks from fixed sources or other core domain derived + * clocks. + *-------------------------------------------------------------------------*/ + +/* Base external input clocks */ +static struct clk func_32k_ck = { + .name = "func_32k_ck", + .rate = 32000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &propagate_rate, +}; + +/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ +static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ + .name = "osc_ck", + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES, + .enable = &omap2_enable_osc_ck, + .disable = &omap2_disable_osc_ck, + .recalc = &omap2_osc_clk_recalc, +}; + +/* With out modem likely 12MHz, with modem likely 13MHz */ +static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ + .name = "sys_ck", /* ~ ref_clk also */ + .parent = &osc_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &omap2_sys_clk_recalc, +}; + +static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ + .name = "alt_ck", + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &propagate_rate, +}; + +/* + * Analog domain root source clocks + */ + +/* dpll_ck, is broken out in to special cases through clksel */ +/* REVISIT: Rate changes on dpll_ck trigger a full set change. ... + * deal with this + */ + +static const struct dpll_data dpll_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .mult_mask = OMAP24XX_DPLL_MULT_MASK, + .div1_mask = OMAP24XX_DPLL_DIV_MASK, +}; + +static struct clk dpll_ck = { + .name = "dpll_ck", + .parent = &sys_ck, /* Can be func_32k also */ + .dpll_data = &dpll_dd, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap2_dpll_recalc, + .set_rate = &omap2_reprogram_dpll, +}; + +static struct clk apll96_ck = { + .name = "apll96_ck", + .parent = &sys_ck, + .rate = 96000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT, + .enable = &omap2_clk_fixed_enable, + .disable = &omap2_clk_fixed_disable, + .recalc = &propagate_rate, +}; + +static struct clk apll54_ck = { + .name = "apll54_ck", + .parent = &sys_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT, + .enable = &omap2_clk_fixed_enable, + .disable = &omap2_clk_fixed_disable, + .recalc = &propagate_rate, +}; + +/* + * PRCM digital base sources + */ + +/* func_54m_ck */ + +static const struct clksel_rate func_54m_apll54_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate func_54m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel func_54m_clksel[] = { + { .parent = &apll54_ck, .rates = func_54m_apll54_rates, }, + { .parent = &alt_ck, .rates = func_54m_alt_rates, }, + { .parent = NULL }, +}; + +static struct clk func_54m_ck = { + .name = "func_54m_ck", + .parent = &apll54_ck, /* can also be alt_clk */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_54M_SOURCE, + .clksel = func_54m_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk core_ck = { + .name = "core_ck", + .parent = &dpll_ck, /* can also be 32k */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &followparent_recalc, +}; + +/* func_96m_ck */ +static const struct clksel_rate func_96m_apll96_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate func_96m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel func_96m_clksel[] = { + { .parent = &apll96_ck, .rates = func_96m_apll96_rates }, + { .parent = &alt_ck, .rates = func_96m_alt_rates }, + { .parent = NULL } +}; + +/* The parent of this clock is not selectable on 2420. */ +static struct clk func_96m_ck = { + .name = "func_96m_ck", + .parent = &apll96_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP2430_96M_SOURCE, + .clksel = func_96m_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* func_48m_ck */ + +static const struct clksel_rate func_48m_apll96_rates[] = { + { .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate func_48m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel func_48m_clksel[] = { + { .parent = &apll96_ck, .rates = func_48m_apll96_rates }, + { .parent = &alt_ck, .rates = func_48m_alt_rates }, + { .parent = NULL } +}; + +static struct clk func_48m_ck = { + .name = "func_48m_ck", + .parent = &apll96_ck, /* 96M or Alt */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_48M_SOURCE, + .clksel = func_48m_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static struct clk func_12m_ck = { + .name = "func_12m_ck", + .parent = &func_48m_ck, + .fixed_div = 4, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .recalc = &omap2_fixed_divisor_recalc, +}; + +/* Secure timer, only available in secure mode */ +static struct clk wdt1_osc_ck = { + .name = "ck_wdt1_osc", + .parent = &osc_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .recalc = &followparent_recalc, +}; + +/* + * The common_clkout* clksel_rate structs are common to + * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src. + * sys_clkout2_* are 2420-only, so the + * clksel_rate flags fields are inaccurate for those clocks. This is + * harmless since access to those clocks are gated by the struct clk + * flags fields, which mark them as 2420-only. + */ +static const struct clksel_rate common_clkout_src_core_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate common_clkout_src_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate common_clkout_src_96m_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate common_clkout_src_54m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel common_clkout_src_clksel[] = { + { .parent = &core_ck, .rates = common_clkout_src_core_rates }, + { .parent = &sys_ck, .rates = common_clkout_src_sys_rates }, + { .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates }, + { .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates }, + { .parent = NULL } +}; + +static struct clk sys_clkout_src = { + .name = "sys_clkout_src", + .parent = &func_54m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES, + .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, + .enable_bit = OMAP24XX_CLKOUT_EN_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, + .clksel_mask = OMAP24XX_CLKOUT_SOURCE_MASK, + .clksel = common_clkout_src_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static const struct clksel_rate common_clkout_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 1, .flags = RATE_IN_24XX }, + { .div = 4, .val = 2, .flags = RATE_IN_24XX }, + { .div = 8, .val = 3, .flags = RATE_IN_24XX }, + { .div = 16, .val = 4, .flags = RATE_IN_24XX }, + { .div = 0 }, +}; + +static const struct clksel sys_clkout_clksel[] = { + { .parent = &sys_clkout_src, .rates = common_clkout_rates }, + { .parent = NULL } +}; + +static struct clk sys_clkout = { + .name = "sys_clkout", + .parent = &sys_clkout_src, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + PARENT_CONTROLS_CLOCK, + .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, + .clksel_mask = OMAP24XX_CLKOUT_DIV_MASK, + .clksel = sys_clkout_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* In 2430, new in 2420 ES2 */ +static struct clk sys_clkout2_src = { + .name = "sys_clkout2_src", + .parent = &func_54m_ck, + .flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES, + .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, + .enable_bit = OMAP2420_CLKOUT2_EN_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, + .clksel_mask = OMAP2420_CLKOUT2_SOURCE_MASK, + .clksel = common_clkout_src_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static const struct clksel sys_clkout2_clksel[] = { + { .parent = &sys_clkout2_src, .rates = common_clkout_rates }, + { .parent = NULL } +}; + +/* In 2430, new in 2420 ES2 */ +static struct clk sys_clkout2 = { + .name = "sys_clkout2", + .parent = &sys_clkout2_src, + .flags = CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK, + .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, + .clksel_mask = OMAP2420_CLKOUT2_DIV_MASK, + .clksel = sys_clkout2_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static struct clk emul_ck = { + .name = "emul_ck", + .parent = &func_54m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL, + .enable_bit = OMAP24XX_EMULATION_EN_SHIFT, + .recalc = &followparent_recalc, + +}; + +/* + * MPU clock domain + * Clocks: + * MPU_FCLK, MPU_ICLK + * INT_M_FCLK, INT_M_I_CLK + * + * - Individual clocks are hardware managed. + * - Base divider comes from: CM_CLKSEL_MPU + * + */ +static const struct clksel_rate mpu_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, + { .div = 4, .val = 4, .flags = RATE_IN_242X }, + { .div = 6, .val = 6, .flags = RATE_IN_242X }, + { .div = 8, .val = 8, .flags = RATE_IN_242X }, + { .div = 0 }, +}; + +static const struct clksel mpu_clksel[] = { + { .parent = &core_ck, .rates = mpu_core_rates }, + { .parent = NULL } +}; + +static struct clk mpu_ck = { /* Control cpu */ + .name = "mpu_ck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | DELAYED_APP | + CONFIG_PARTICIPANT | RATE_PROPAGATES, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL), + .clksel_mask = OMAP24XX_CLKSEL_MPU_MASK, + .clksel = mpu_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* + * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain + * Clocks: + * 2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK + * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP + * + * Won't be too specific here. The core clock comes into this block + * it is divided then tee'ed. One branch goes directly to xyz enable + * controls. The other branch gets further divided by 2 then possibly + * routed into a synchronizer and out of clocks abc. + */ +static const struct clksel_rate dsp_fck_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, + { .div = 3, .val = 3, .flags = RATE_IN_24XX }, + { .div = 4, .val = 4, .flags = RATE_IN_24XX }, + { .div = 6, .val = 6, .flags = RATE_IN_242X }, + { .div = 8, .val = 8, .flags = RATE_IN_242X }, + { .div = 12, .val = 12, .flags = RATE_IN_242X }, + { .div = 0 }, +}; + +static const struct clksel dsp_fck_clksel[] = { + { .parent = &core_ck, .rates = dsp_fck_core_rates }, + { .parent = NULL } +}; + +static struct clk dsp_fck = { + .name = "dsp_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | + CONFIG_PARTICIPANT | RATE_PROPAGATES, + .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), + .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), + .clksel_mask = OMAP24XX_CLKSEL_DSP_MASK, + .clksel = dsp_fck_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* DSP interface clock */ +static const struct clksel_rate dsp_irate_ick_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, + { .div = 3, .val = 3, .flags = RATE_IN_243X }, + { .div = 0 }, +}; + +static const struct clksel dsp_irate_ick_clksel[] = { + { .parent = &dsp_fck, .rates = dsp_irate_ick_rates }, + { .parent = NULL } +}; + +/* + * This clock does not exist as such in the TRM, but is added to + * separate source selection from XXX + */ +static struct clk dsp_irate_ick = { + .name = "dsp_irate_ick", + .parent = &dsp_fck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | + CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK, + .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), + .clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK, + .clksel = dsp_irate_ick_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* 2420 only */ +static struct clk dsp_ick = { + .name = "dsp_ick", /* apparently ipi and isp */ + .parent = &dsp_irate_ick, + .flags = CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT, + .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN), + .enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */ +}; + +/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */ +static struct clk iva2_1_ick = { + .name = "iva2_1_ick", + .parent = &dsp_irate_ick, + .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), + .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, +}; + +static struct clk iva1_ifck = { + .name = "iva1_ifck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT | + RATE_PROPAGATES | DELAYED_APP, + .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), + .enable_bit = OMAP2420_EN_IVA_COP_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), + .clksel_mask = OMAP2420_CLKSEL_IVA_MASK, + .clksel = dsp_fck_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* IVA1 mpu/int/i/f clocks are /2 of parent */ +static struct clk iva1_mpu_int_ifck = { + .name = "iva1_mpu_int_ifck", + .parent = &iva1_ifck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), + .enable_bit = OMAP2420_EN_IVA_MPU_SHIFT, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + +/* + * L3 clock domain + * L3 clocks are used for both interface and functional clocks to + * multiple entities. Some of these clocks are completely managed + * by hardware, and some others allow software control. Hardware + * managed ones general are based on directly CLK_REQ signals and + * various auto idle settings. The functional spec sets many of these + * as 'tie-high' for their enables. + * + * I-CLOCKS: + * L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA + * CAM, HS-USB. + * F-CLOCK + * SSI. + * + * GPMC memories and SDRC have timing and clock sensitive registers which + * may very well need notification when the clock changes. Currently for low + * operating points, these are taken care of in sleep.S. + */ +static const struct clksel_rate core_l3_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, + { .div = 2, .val = 2, .flags = RATE_IN_242X }, + { .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 6, .val = 6, .flags = RATE_IN_24XX }, + { .div = 8, .val = 8, .flags = RATE_IN_242X }, + { .div = 12, .val = 12, .flags = RATE_IN_242X }, + { .div = 16, .val = 16, .flags = RATE_IN_242X }, + { .div = 0 } +}; + +static const struct clksel core_l3_clksel[] = { + { .parent = &core_ck, .rates = core_l3_core_rates }, + { .parent = NULL } +}; + +static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ + .name = "core_l3_ck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | DELAYED_APP | + CONFIG_PARTICIPANT | RATE_PROPAGATES, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_CLKSEL_L3_MASK, + .clksel = core_l3_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* usb_l4_ick */ +static const struct clksel_rate usb_l4_ick_core_l3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 4, .val = 4, .flags = RATE_IN_24XX }, + { .div = 0 } +}; + +static const struct clksel usb_l4_ick_clksel[] = { + { .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates }, + { .parent = NULL }, +}; + +static struct clk usb_l4_ick = { /* FS-USB interface clock */ + .name = "usb_l4_ick", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + DELAYED_APP | CONFIG_PARTICIPANT, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP24XX_EN_USB_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_CLKSEL_USB_MASK, + .clksel = usb_l4_ick_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* + * SSI is in L3 management domain, its direct parent is core not l3, + * many core power domain entities are grouped into the L3 clock + * domain. + * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK + * + * ssr = core/1/2/3/4/5, sst = 1/2 ssr. + */ +static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 3, .val = 3, .flags = RATE_IN_24XX }, + { .div = 4, .val = 4, .flags = RATE_IN_24XX }, + { .div = 5, .val = 5, .flags = RATE_IN_243X }, + { .div = 6, .val = 6, .flags = RATE_IN_242X }, + { .div = 8, .val = 8, .flags = RATE_IN_242X }, + { .div = 0 } +}; + +static const struct clksel ssi_ssr_sst_fck_clksel[] = { + { .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates }, + { .parent = NULL } +}; + +static struct clk ssi_ssr_sst_fck = { + .name = "ssi_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + DELAYED_APP, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP24XX_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_sst_fck_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* + * GFX clock domain + * Clocks: + * GFX_FCLK, GFX_ICLK + * GFX_CG1(2d), GFX_CG2(3d) + * + * GFX_FCLK runs from L3, and is divided by (1,2,3,4) + * The 2d and 3d clocks run at a hardware determined + * divided value of fclk. + * + */ +/* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */ + +/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */ +static const struct clksel gfx_fck_clksel[] = { + { .parent = &core_l3_ck, .rates = gfx_l3_rates }, + { .parent = NULL }, +}; + +static struct clk gfx_3d_fck = { + .name = "gfx_3d_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP24XX_EN_3D_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), + .clksel_mask = OMAP_CLKSEL_GFX_MASK, + .clksel = gfx_fck_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static struct clk gfx_2d_fck = { + .name = "gfx_2d_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP24XX_EN_2D_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), + .clksel_mask = OMAP_CLKSEL_GFX_MASK, + .clksel = gfx_fck_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static struct clk gfx_ick = { + .name = "gfx_ick", /* From l3 */ + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), + .enable_bit = OMAP_EN_GFX_SHIFT, + .recalc = &followparent_recalc, +}; + +/* + * Modem clock domain (2430) + * CLOCKS: + * MDM_OSC_CLK + * MDM_ICLK + * These clocks are usable in chassis mode only. + */ +static const struct clksel_rate mdm_ick_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_243X }, + { .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE }, + { .div = 6, .val = 6, .flags = RATE_IN_243X }, + { .div = 9, .val = 9, .flags = RATE_IN_243X }, + { .div = 0 } +}; + +static const struct clksel mdm_ick_clksel[] = { + { .parent = &core_ck, .rates = mdm_ick_core_rates }, + { .parent = NULL } +}; + +static struct clk mdm_ick = { /* used both as a ick and fck */ + .name = "mdm_ick", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN), + .enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL), + .clksel_mask = OMAP2430_CLKSEL_MDM_MASK, + .clksel = mdm_ick_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static struct clk mdm_osc_ck = { + .name = "mdm_osc_ck", + .parent = &osc_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN), + .enable_bit = OMAP2430_EN_OSC_SHIFT, + .recalc = &followparent_recalc, +}; + +/* + * L4 clock management domain + * + * This domain contains lots of interface clocks from the L4 interface, some + * functional clocks. Fixed APLL functional source clocks are managed in + * this domain. + */ +static const struct clksel_rate l4_core_l3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, + { .div = 0 } +}; + +static const struct clksel l4_clksel[] = { + { .parent = &core_l3_ck, .rates = l4_core_l3_rates }, + { .parent = NULL } +}; + +static struct clk l4_ck = { /* used both as an ick and fck */ + .name = "l4_ck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, + .clksel = l4_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP24XX_EN_SSI_SHIFT, + .recalc = &followparent_recalc, +}; + +/* + * DSS clock domain + * CLOCKs: + * DSS_L4_ICLK, DSS_L3_ICLK, + * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK + * + * DSS is both initiator and target. + */ +/* XXX Add RATE_NOT_VALIDATED */ + +static const struct clksel_rate dss1_fck_sys_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate dss1_fck_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, + { .div = 3, .val = 3, .flags = RATE_IN_24XX }, + { .div = 4, .val = 4, .flags = RATE_IN_24XX }, + { .div = 5, .val = 5, .flags = RATE_IN_24XX }, + { .div = 6, .val = 6, .flags = RATE_IN_24XX }, + { .div = 8, .val = 8, .flags = RATE_IN_24XX }, + { .div = 9, .val = 9, .flags = RATE_IN_24XX }, + { .div = 12, .val = 12, .flags = RATE_IN_24XX }, + { .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel dss1_fck_clksel[] = { + { .parent = &sys_ck, .rates = dss1_fck_sys_rates }, + { .parent = &core_ck, .rates = dss1_fck_core_rates }, + { .parent = NULL }, +}; + +static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ + .name = "dss_ick", + .parent = &l4_ck, /* really both l3 and l4 */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_DSS1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk dss1_fck = { + .name = "dss1_fck", + .parent = &core_ck, /* Core or sys */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + DELAYED_APP, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_DSS1_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_CLKSEL_DSS1_MASK, + .clksel = dss1_fck_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static const struct clksel_rate dss2_fck_sys_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate dss2_fck_48m_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel dss2_fck_clksel[] = { + { .parent = &sys_ck, .rates = dss2_fck_sys_rates }, + { .parent = &func_48m_ck, .rates = dss2_fck_48m_rates }, + { .parent = NULL } +}; + +static struct clk dss2_fck = { /* Alt clk used in power management */ + .name = "dss2_fck", + .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + DELAYED_APP, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_DSS2_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_CLKSEL_DSS2_MASK, + .clksel = dss2_fck_clksel, + .recalc = &followparent_recalc, +}; + +static struct clk dss_54m_fck = { /* Alt clk used in power management */ + .name = "dss_54m_fck", /* 54m tv clk */ + .parent = &func_54m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_TV_SHIFT, + .recalc = &followparent_recalc, +}; + +/* + * CORE power domain ICLK & FCLK defines. + * Many of the these can have more than one possible parent. Entries + * here will likely have an L4 interface parent, and may have multiple + * functional clock parents. + */ +static const struct clksel_rate gpt_alt_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap24xx_gpt_clksel[] = { + { .parent = &func_32k_ck, .rates = gpt_32k_rates }, + { .parent = &sys_ck, .rates = gpt_sys_rates }, + { .parent = &alt_ck, .rates = gpt_alt_rates }, + { .parent = NULL }, +}; + +static struct clk gpt1_ick = { + .name = "gpt1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP24XX_EN_GPT1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt1_fck = { + .name = "gpt1_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP24XX_EN_GPT1_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_CLKSEL_GPT1_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static struct clk gpt2_ick = { + .name = "gpt2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt2_fck = { + .name = "gpt2_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT2_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT2_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt3_ick = { + .name = "gpt3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt3_fck = { + .name = "gpt3_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT3_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT3_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt4_ick = { + .name = "gpt4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT4_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt4_fck = { + .name = "gpt4_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT4_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT4_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt5_ick = { + .name = "gpt5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT5_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt5_fck = { + .name = "gpt5_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT5_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT5_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt6_ick = { + .name = "gpt6_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT6_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt6_fck = { + .name = "gpt6_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT6_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT6_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt7_ick = { + .name = "gpt7_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT7_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt7_fck = { + .name = "gpt7_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT7_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT7_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt8_ick = { + .name = "gpt8_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT8_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt8_fck = { + .name = "gpt8_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT8_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT8_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt9_ick = { + .name = "gpt9_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT9_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt9_fck = { + .name = "gpt9_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT9_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT9_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt10_ick = { + .name = "gpt10_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT10_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt10_fck = { + .name = "gpt10_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT10_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT10_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt11_ick = { + .name = "gpt11_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT11_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt11_fck = { + .name = "gpt11_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT11_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT11_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt12_ick = { + .name = "gpt12_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_GPT12_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpt12_fck = { + .name = "gpt12_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_GPT12_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), + .clksel_mask = OMAP24XX_CLKSEL_GPT12_MASK, + .clksel = omap24xx_gpt_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp1_ick = { + .name = "mcbsp1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp1_fck = { + .name = "mcbsp1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp2_ick = { + .name = "mcbsp2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp2_fck = { + .name = "mcbsp2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp3_ick = { + .name = "mcbsp3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp3_fck = { + .name = "mcbsp3_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp4_ick = { + .name = "mcbsp4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp4_fck = { + .name = "mcbsp4_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp5_ick = { + .name = "mcbsp5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp5_fck = { + .name = "mcbsp5_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_ick = { + .name = "mcspi_ick", + .id = 1, + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_fck = { + .name = "mcspi_fck", + .id = 1, + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_ick = { + .name = "mcspi_ick", + .id = 2, + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_fck = { + .name = "mcspi_fck", + .id = 2, + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_ick = { + .name = "mcspi_ick", + .id = 3, + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_fck = { + .name = "mcspi_fck", + .id = 3, + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_ick = { + .name = "uart1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_UART1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_fck = { + .name = "uart1_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_UART1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_ick = { + .name = "uart2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_UART2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_fck = { + .name = "uart2_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_UART2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart3_ick = { + .name = "uart3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP24XX_EN_UART3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart3_fck = { + .name = "uart3_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP24XX_EN_UART3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpios_ick = { + .name = "gpios_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpios_fck = { + .name = "gpios_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mpu_wdt_ick = { + .name = "mpu_wdt_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mpu_wdt_fck = { + .name = "mpu_wdt_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk sync_32k_ick = { + .name = "sync_32k_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP24XX_EN_32KSYNC_SHIFT, + .recalc = &followparent_recalc, +}; +static struct clk wdt1_ick = { + .name = "wdt1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP24XX_EN_WDT1_SHIFT, + .recalc = &followparent_recalc, +}; +static struct clk omapctrl_ick = { + .name = "omapctrl_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT, + .recalc = &followparent_recalc, +}; +static struct clk icr_ick = { + .name = "icr_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP2430_EN_ICR_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk cam_ick = { + .name = "cam_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_CAM_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk cam_fck = { + .name = "cam_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_CAM_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mailboxes_ick = { + .name = "mailboxes_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk wdt4_ick = { + .name = "wdt4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_WDT4_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk wdt4_fck = { + .name = "wdt4_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_WDT4_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_ick = { + .name = "wdt3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP2420_EN_WDT3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_fck = { + .name = "wdt3_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP2420_EN_WDT3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mspro_ick = { + .name = "mspro_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mspro_fck = { + .name = "mspro_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mmc_ick = { + .name = "mmc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP2420_EN_MMC_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mmc_fck = { + .name = "mmc_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP2420_EN_MMC_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk fac_ick = { + .name = "fac_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_FAC_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk fac_fck = { + .name = "fac_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_FAC_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk eac_ick = { + .name = "eac_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP2420_EN_EAC_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk eac_fck = { + .name = "eac_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP2420_EN_EAC_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk hdq_ick = { + .name = "hdq_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP24XX_EN_HDQ_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk hdq_fck = { + .name = "hdq_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP24XX_EN_HDQ_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_ick = { + .name = "i2c_ick", + .id = 2, + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP2420_EN_I2C2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_fck = { + .name = "i2c_fck", + .id = 2, + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP2420_EN_I2C2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk i2chs2_fck = { + .name = "i2chs_fck", + .id = 2, + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_I2CHS2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_ick = { + .name = "i2c_ick", + .id = 1, + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP2420_EN_I2C1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_fck = { + .name = "i2c_fck", + .id = 1, + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP2420_EN_I2C1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk i2chs1_fck = { + .name = "i2chs_fck", + .id = 1, + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_I2CHS1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpmc_fck = { + .name = "gpmc_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .recalc = &followparent_recalc, +}; + +static struct clk sdma_fck = { + .name = "sdma_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .recalc = &followparent_recalc, +}; + +static struct clk sdma_ick = { + .name = "sdma_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .recalc = &followparent_recalc, +}; + +static struct clk vlynq_ick = { + .name = "vlynq_ick", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, + .recalc = &followparent_recalc, +}; + +static const struct clksel_rate vlynq_fck_96m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate vlynq_fck_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_242X }, + { .div = 2, .val = 2, .flags = RATE_IN_242X }, + { .div = 3, .val = 3, .flags = RATE_IN_242X }, + { .div = 4, .val = 4, .flags = RATE_IN_242X }, + { .div = 6, .val = 6, .flags = RATE_IN_242X }, + { .div = 8, .val = 8, .flags = RATE_IN_242X }, + { .div = 9, .val = 9, .flags = RATE_IN_242X }, + { .div = 12, .val = 12, .flags = RATE_IN_242X }, + { .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE }, + { .div = 18, .val = 18, .flags = RATE_IN_242X }, + { .div = 0 } +}; + +static const struct clksel vlynq_fck_clksel[] = { + { .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates }, + { .parent = &core_ck, .rates = vlynq_fck_core_rates }, + { .parent = NULL } +}; + +static struct clk vlynq_fck = { + .name = "vlynq_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | DELAYED_APP, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), + .clksel_mask = OMAP2420_CLKSEL_VLYNQ_MASK, + .clksel = vlynq_fck_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +static struct clk sdrc_ick = { + .name = "sdrc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP2430_EN_SDRC_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk des_ick = { + .name = "des_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), + .enable_bit = OMAP24XX_EN_DES_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk sha_ick = { + .name = "sha_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), + .enable_bit = OMAP24XX_EN_SHA_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk rng_ick = { + .name = "rng_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), + .enable_bit = OMAP24XX_EN_RNG_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk aes_ick = { + .name = "aes_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), + .enable_bit = OMAP24XX_EN_AES_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk pka_ick = { + .name = "pka_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), + .enable_bit = OMAP24XX_EN_PKA_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk usb_fck = { + .name = "usb_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP24XX_EN_USB_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk usbhs_ick = { + .name = "usbhs_ick", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP2430_EN_USBHS_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_ick = { + .name = "mmchs_ick", + .id = 1, + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_fck = { + .name = "mmchs_fck", + .id = 1, + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_ick = { + .name = "mmchs_ick", + .id = 2, + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_fck = { + .name = "mmchs_fck", + .id = 2, + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_ick = { + .name = "gpio5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP2430_EN_GPIO5_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_fck = { + .name = "gpio5_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_GPIO5_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mdm_intc_ick = { + .name = "mdm_intc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP2430_EN_MDM_INTC_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mmchsdb1_fck = { + .name = "mmchsdb_fck", + .id = 1, + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mmchsdb2_fck = { + .name = "mmchsdb_fck", + .id = 2, + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), + .enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT, + .recalc = &followparent_recalc, +}; + +/* + * This clock is a composite clock which does entire set changes then + * forces a rebalance. It keys on the MPU speed, but it really could + * be any key speed part of a set in the rate table. + * + * to really change a set, you need memory table sets which get changed + * in sram, pre-notifiers & post notifiers, changing the top set, without + * having low level display recalc's won't work... this is why dpm notifiers + * work, isr's off, walk a list of clocks already _off_ and not messing with + * the bus. + * + * This clock should have no parent. It embodies the entire upper level + * active set. A parent will mess up some of the init also. + */ +static struct clk virt_prcm_set = { + .name = "virt_prcm_set", + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, + .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ + .recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */ + .set_rate = &omap2_select_table_rate, + .round_rate = &omap2_round_to_table_rate, +}; + +static struct clk *onchip_24xx_clks[] __initdata = { + /* external root sources */ + &func_32k_ck, + &osc_ck, + &sys_ck, + &alt_ck, + /* internal analog sources */ + &dpll_ck, + &apll96_ck, + &apll54_ck, + /* internal prcm root sources */ + &func_54m_ck, + &core_ck, + &func_96m_ck, + &func_48m_ck, + &func_12m_ck, + &wdt1_osc_ck, + &sys_clkout_src, + &sys_clkout, + &sys_clkout2_src, + &sys_clkout2, + &emul_ck, + /* mpu domain clocks */ + &mpu_ck, + /* dsp domain clocks */ + &dsp_fck, + &dsp_irate_ick, + &dsp_ick, /* 242x */ + &iva2_1_ick, /* 243x */ + &iva1_ifck, /* 242x */ + &iva1_mpu_int_ifck, /* 242x */ + /* GFX domain clocks */ + &gfx_3d_fck, + &gfx_2d_fck, + &gfx_ick, + /* Modem domain clocks */ + &mdm_ick, + &mdm_osc_ck, + /* DSS domain clocks */ + &dss_ick, + &dss1_fck, + &dss2_fck, + &dss_54m_fck, + /* L3 domain clocks */ + &core_l3_ck, + &ssi_ssr_sst_fck, + &usb_l4_ick, + /* L4 domain clocks */ + &l4_ck, /* used as both core_l4 and wu_l4 */ + &ssi_l4_ick, + /* virtual meta-group clock */ + &virt_prcm_set, + /* general l4 interface ck, multi-parent functional clk */ + &gpt1_ick, + &gpt1_fck, + &gpt2_ick, + &gpt2_fck, + &gpt3_ick, + &gpt3_fck, + &gpt4_ick, + &gpt4_fck, + &gpt5_ick, + &gpt5_fck, + &gpt6_ick, + &gpt6_fck, + &gpt7_ick, + &gpt7_fck, + &gpt8_ick, + &gpt8_fck, + &gpt9_ick, + &gpt9_fck, + &gpt10_ick, + &gpt10_fck, + &gpt11_ick, + &gpt11_fck, + &gpt12_ick, + &gpt12_fck, + &mcbsp1_ick, + &mcbsp1_fck, + &mcbsp2_ick, + &mcbsp2_fck, + &mcbsp3_ick, + &mcbsp3_fck, + &mcbsp4_ick, + &mcbsp4_fck, + &mcbsp5_ick, + &mcbsp5_fck, + &mcspi1_ick, + &mcspi1_fck, + &mcspi2_ick, + &mcspi2_fck, + &mcspi3_ick, + &mcspi3_fck, + &uart1_ick, + &uart1_fck, + &uart2_ick, + &uart2_fck, + &uart3_ick, + &uart3_fck, + &gpios_ick, + &gpios_fck, + &mpu_wdt_ick, + &mpu_wdt_fck, + &sync_32k_ick, + &wdt1_ick, + &omapctrl_ick, + &icr_ick, + &cam_fck, + &cam_ick, + &mailboxes_ick, + &wdt4_ick, + &wdt4_fck, + &wdt3_ick, + &wdt3_fck, + &mspro_ick, + &mspro_fck, + &mmc_ick, + &mmc_fck, + &fac_ick, + &fac_fck, + &eac_ick, + &eac_fck, + &hdq_ick, + &hdq_fck, + &i2c1_ick, + &i2c1_fck, + &i2chs1_fck, + &i2c2_ick, + &i2c2_fck, + &i2chs2_fck, + &gpmc_fck, + &sdma_fck, + &sdma_ick, + &vlynq_ick, + &vlynq_fck, + &sdrc_ick, + &des_ick, + &sha_ick, + &rng_ick, + &aes_ick, + &pka_ick, + &usb_fck, + &usbhs_ick, + &mmchs1_ick, + &mmchs1_fck, + &mmchs2_ick, + &mmchs2_fck, + &gpio5_ick, + &gpio5_fck, + &mdm_intc_ick, + &mmchsdb1_fck, + &mmchsdb2_fck, +}; + +#endif + diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c new file mode 100644 index 000000000000..b42bdd6079a5 --- /dev/null +++ b/arch/arm/mach-omap2/clock34xx.c @@ -0,0 +1,235 @@ +/* + * OMAP3-specific clock framework functions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * Parts of this code are based on code written by + * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> +#include <asm/div64.h> +#include <asm/bitops.h> + +#include "memory.h" +#include "clock.h" +#include "clock34xx.h" +#include "prm.h" +#include "prm-regbits-34xx.h" +#include "cm.h" +#include "cm-regbits-34xx.h" + +/* CM_CLKEN_PLL*.EN* bit values */ +#define DPLL_LOCKED 0x7 + +/** + * omap3_dpll_recalc - recalculate DPLL rate + * @clk: DPLL struct clk + * + * Recalculate and propagate the DPLL rate. + */ +static void omap3_dpll_recalc(struct clk *clk) +{ + clk->rate = omap2_get_dpll_rate(clk); + + propagate_rate(clk); +} + +/** + * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate + * @clk: DPLL output struct clk + * + * Using parent clock DPLL data, look up DPLL state. If locked, set our + * rate to the dpll_clk * 2; otherwise, just use dpll_clk. + */ +static void omap3_clkoutx2_recalc(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + struct clk *pclk; + + /* Walk up the parents of clk, looking for a DPLL */ + pclk = clk->parent; + while (pclk && !pclk->dpll_data) + pclk = pclk->parent; + + /* clk does not have a DPLL as a parent? */ + WARN_ON(!pclk); + + dd = pclk->dpll_data; + + WARN_ON(!dd->control_reg || !dd->enable_mask); + + v = __raw_readl(dd->control_reg) & dd->enable_mask; + v >>= __ffs(dd->enable_mask); + if (v != DPLL_LOCKED) + clk->rate = clk->parent->rate; + else + clk->rate = clk->parent->rate * 2; + + if (clk->flags & RATE_PROPAGATES) + propagate_rate(clk); +} + +/* + * As it is structured now, this will prevent an OMAP2/3 multiboot + * kernel from compiling. This will need further attention. + */ +#if defined(CONFIG_ARCH_OMAP3) + +static struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, +}; + +/* + * Set clocks for bypass mode for reboot to work. + */ +void omap2_clk_prepare_for_reboot(void) +{ + /* REVISIT: Not ready for 343x */ +#if 0 + u32 rate; + + if (vclk == NULL || sclk == NULL) + return; + + rate = clk_get_rate(sclk); + clk_set_rate(vclk, rate); +#endif +} + +/* REVISIT: Move this init stuff out into clock.c */ + +/* + * Switch the MPU rate if specified on cmdline. + * We cannot do this early until cmdline is parsed. + */ +static int __init omap2_clk_arch_init(void) +{ + if (!mpurate) + return -EINVAL; + + /* REVISIT: not yet ready for 343x */ +#if 0 + if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + printk(KERN_ERR "Could not find matching MPU rate\n"); +#endif + + recalculate_root_clocks(); + + printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, + (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ; + + return 0; +} +arch_initcall(omap2_clk_arch_init); + +int __init omap2_clk_init(void) +{ + /* struct prcm_config *prcm; */ + struct clk **clkp; + /* u32 clkrate; */ + u32 cpu_clkflg; + + /* REVISIT: Ultimately this will be used for multiboot */ +#if 0 + if (cpu_is_omap242x()) { + cpu_mask = RATE_IN_242X; + cpu_clkflg = CLOCK_IN_OMAP242X; + clkp = onchip_24xx_clks; + } else if (cpu_is_omap2430()) { + cpu_mask = RATE_IN_243X; + cpu_clkflg = CLOCK_IN_OMAP243X; + clkp = onchip_24xx_clks; + } +#endif + if (cpu_is_omap34xx()) { + cpu_mask = RATE_IN_343X; + cpu_clkflg = CLOCK_IN_OMAP343X; + clkp = onchip_34xx_clks; + + /* + * Update this if there are further clock changes between ES2 + * and production parts + */ + if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0)) { + /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ + cpu_clkflg |= CLOCK_IN_OMAP3430ES1; + } else { + cpu_mask |= RATE_IN_3430ES2; + cpu_clkflg |= CLOCK_IN_OMAP3430ES2; + } + } + + clk_init(&omap2_clk_functions); + + for (clkp = onchip_34xx_clks; + clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks); + clkp++) { + if ((*clkp)->flags & cpu_clkflg) + clk_register(*clkp); + } + + /* REVISIT: Not yet ready for OMAP3 */ +#if 0 + /* Check the MPU rate set by bootloader */ + clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; +#endif + + recalculate_root_clocks(); + + printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): " + "%ld.%01ld/%ld/%ld MHz\n", + (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, + (core_ck.rate / 1000000), (arm_fck.rate / 1000000)); + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + /* Avoid sleeping during omap2_clk_prepare_for_reboot() */ + /* REVISIT: not yet ready for 343x */ +#if 0 + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); +#endif + return 0; +} + +#endif diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h new file mode 100644 index 000000000000..c9c5972a2e25 --- /dev/null +++ b/arch/arm/mach-omap2/clock34xx.h @@ -0,0 +1,3012 @@ +/* + * OMAP3 clock framework + * + * Virtual clocks are introduced as a convenient tools. + * They are sources for other clocks and not supposed + * to be requested from drivers directly. + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H + +#include <asm/arch/control.h> + +#include "clock.h" +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm.h" +#include "prm-regbits-34xx.h" + +static void omap3_dpll_recalc(struct clk *clk); +static void omap3_clkoutx2_recalc(struct clk *clk); + +/* + * DPLL1 supplies clock to the MPU. + * DPLL2 supplies clock to the IVA2. + * DPLL3 supplies CORE domain clocks. + * DPLL4 supplies peripheral clocks. + * DPLL5 supplies other peripheral clocks (USBHOST, USIM). + */ + +/* PRM CLOCKS */ + +/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */ +static struct clk omap_32k_fck = { + .name = "omap_32k_fck", + .rate = 32768, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +static struct clk secure_32k_fck = { + .name = "secure_32k_fck", + .rate = 32768, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +/* Virtual source clocks for osc_sys_ck */ +static struct clk virt_12m_ck = { + .name = "virt_12m_ck", + .rate = 12000000, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +static struct clk virt_13m_ck = { + .name = "virt_13m_ck", + .rate = 13000000, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +static struct clk virt_16_8m_ck = { + .name = "virt_16_8m_ck", + .rate = 16800000, + .flags = CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +static struct clk virt_19_2m_ck = { + .name = "virt_19_2m_ck", + .rate = 19200000, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +static struct clk virt_26m_ck = { + .name = "virt_26m_ck", + .rate = 26000000, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +static struct clk virt_38_4m_ck = { + .name = "virt_38_4m_ck", + .rate = 38400000, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +static const struct clksel_rate osc_sys_12m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_13m_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_16_8m_rates[] = { + { .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_19_2m_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_26m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_38_4m_rates[] = { + { .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel osc_sys_clksel[] = { + { .parent = &virt_12m_ck, .rates = osc_sys_12m_rates }, + { .parent = &virt_13m_ck, .rates = osc_sys_13m_rates }, + { .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates }, + { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates }, + { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates }, + { .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates }, + { .parent = NULL }, +}; + +/* Oscillator clock */ +/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */ +static struct clk osc_sys_ck = { + .name = "osc_sys_ck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_PRM_CLKSEL, + .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, + .clksel = osc_sys_clksel, + /* REVISIT: deal with autoextclkmode? */ + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate div2_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel sys_clksel[] = { + { .parent = &osc_sys_ck, .rates = div2_rates }, + { .parent = NULL } +}; + +/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */ +/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */ +static struct clk sys_ck = { + .name = "sys_ck", + .parent = &osc_sys_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, + .clksel_mask = OMAP_SYSCLKDIV_MASK, + .clksel = sys_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk sys_altclk = { + .name = "sys_altclk", + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +/* Optional external clock input for some McBSPs */ +static struct clk mcbsp_clks = { + .name = "mcbsp_clks", + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &propagate_rate, +}; + +/* PRM EXTERNAL CLOCK OUTPUT */ + +static struct clk sys_clkout1 = { + .name = "sys_clkout1", + .parent = &osc_sys_ck, + .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, + .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +/* DPLLS */ + +/* CM CLOCKS */ + +static const struct clksel_rate dpll_bypass_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate dpll_locked_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate div16_dpll_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 5, .val = 5, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 7, .val = 7, .flags = RATE_IN_343X }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 9, .val = 9, .flags = RATE_IN_343X }, + { .div = 10, .val = 10, .flags = RATE_IN_343X }, + { .div = 11, .val = 11, .flags = RATE_IN_343X }, + { .div = 12, .val = 12, .flags = RATE_IN_343X }, + { .div = 13, .val = 13, .flags = RATE_IN_343X }, + { .div = 14, .val = 14, .flags = RATE_IN_343X }, + { .div = 15, .val = 15, .flags = RATE_IN_343X }, + { .div = 16, .val = 16, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +/* DPLL1 */ +/* MPU clock source */ +/* Type: DPLL */ +static const struct dpll_data dpll1_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), + .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, + .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, + .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), + .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, + .auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_MPU_DPLL_ST_SHIFT, +}; + +static struct clk dpll1_ck = { + .name = "dpll1_ck", + .parent = &sys_ck, + .dpll_data = &dpll1_dd, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed. + */ +static struct clk dpll1_x2_ck = { + .name = "dpll1_x2_ck", + .parent = &dpll1_ck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap3_clkoutx2_recalc, +}; + +/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */ +static const struct clksel div16_dpll1_x2m2_clksel[] = { + { .parent = &dpll1_x2_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* + * Does not exist in the TRM - needed to separate the M2 divider from + * bypass selection in mpu_ck + */ +static struct clk dpll1_x2m2_ck = { + .name = "dpll1_x2m2_ck", + .parent = &dpll1_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), + .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, + .clksel = div16_dpll1_x2m2_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* DPLL2 */ +/* IVA2 clock source */ +/* Type: DPLL */ + +static const struct dpll_data dpll2_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), + .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, + .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, + .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), + .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, + .auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT, +}; + +static struct clk dpll2_ck = { + .name = "dpll2_ck", + .parent = &sys_ck, + .dpll_data = &dpll2_dd, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap3_dpll_recalc, +}; + +static const struct clksel div16_dpll2_m2x2_clksel[] = { + { .parent = &dpll2_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* + * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT + * or CLKOUTX2. CLKOUT seems most plausible. + */ +static struct clk dpll2_m2_ck = { + .name = "dpll2_m2_ck", + .parent = &dpll2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, + OMAP3430_CM_CLKSEL2_PLL), + .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, + .clksel = div16_dpll2_m2x2_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* DPLL3 */ +/* Source clock for all interfaces and for some device fclks */ +/* Type: DPLL */ +static const struct dpll_data dpll3_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, + .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, + .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, +}; + +static struct clk dpll3_ck = { + .name = "dpll3_ck", + .parent = &sys_ck, + .dpll_data = &dpll3_dd, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed + */ +static struct clk dpll3_x2_ck = { + .name = "dpll3_x2_ck", + .parent = &dpll3_ck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel_rate div31_dpll3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_3430ES2 }, + { .div = 4, .val = 4, .flags = RATE_IN_3430ES2 }, + { .div = 5, .val = 5, .flags = RATE_IN_3430ES2 }, + { .div = 6, .val = 6, .flags = RATE_IN_3430ES2 }, + { .div = 7, .val = 7, .flags = RATE_IN_3430ES2 }, + { .div = 8, .val = 8, .flags = RATE_IN_3430ES2 }, + { .div = 9, .val = 9, .flags = RATE_IN_3430ES2 }, + { .div = 10, .val = 10, .flags = RATE_IN_3430ES2 }, + { .div = 11, .val = 11, .flags = RATE_IN_3430ES2 }, + { .div = 12, .val = 12, .flags = RATE_IN_3430ES2 }, + { .div = 13, .val = 13, .flags = RATE_IN_3430ES2 }, + { .div = 14, .val = 14, .flags = RATE_IN_3430ES2 }, + { .div = 15, .val = 15, .flags = RATE_IN_3430ES2 }, + { .div = 16, .val = 16, .flags = RATE_IN_3430ES2 }, + { .div = 17, .val = 17, .flags = RATE_IN_3430ES2 }, + { .div = 18, .val = 18, .flags = RATE_IN_3430ES2 }, + { .div = 19, .val = 19, .flags = RATE_IN_3430ES2 }, + { .div = 20, .val = 20, .flags = RATE_IN_3430ES2 }, + { .div = 21, .val = 21, .flags = RATE_IN_3430ES2 }, + { .div = 22, .val = 22, .flags = RATE_IN_3430ES2 }, + { .div = 23, .val = 23, .flags = RATE_IN_3430ES2 }, + { .div = 24, .val = 24, .flags = RATE_IN_3430ES2 }, + { .div = 25, .val = 25, .flags = RATE_IN_3430ES2 }, + { .div = 26, .val = 26, .flags = RATE_IN_3430ES2 }, + { .div = 27, .val = 27, .flags = RATE_IN_3430ES2 }, + { .div = 28, .val = 28, .flags = RATE_IN_3430ES2 }, + { .div = 29, .val = 29, .flags = RATE_IN_3430ES2 }, + { .div = 30, .val = 30, .flags = RATE_IN_3430ES2 }, + { .div = 31, .val = 31, .flags = RATE_IN_3430ES2 }, + { .div = 0 }, +}; + +static const struct clksel div31_dpll3m2_clksel[] = { + { .parent = &dpll3_ck, .rates = div31_dpll3_rates }, + { .parent = NULL } +}; + +/* + * DPLL3 output M2 + * REVISIT: This DPLL output divider must be changed in SRAM, so until + * that code is ready, this should remain a 'read-only' clksel clock. + */ +static struct clk dpll3_m2_ck = { + .name = "dpll3_m2_ck", + .parent = &dpll3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, + .clksel = div31_dpll3m2_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel core_ck_clksel[] = { + { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &dpll3_m2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk core_ck = { + .name = "core_ck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .clksel_mask = OMAP3430_ST_CORE_CLK, + .clksel = core_ck_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel dpll3_m2x2_ck_clksel[] = { + { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &dpll3_x2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk dpll3_m2x2_ck = { + .name = "dpll3_m2x2_ck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .clksel_mask = OMAP3430_ST_CORE_CLK, + .clksel = dpll3_m2x2_ck_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static const struct clksel div16_dpll3_clksel[] = { + { .parent = &dpll3_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* This virtual clock is the source for dpll3_m3x2_ck */ +static struct clk dpll3_m3_ck = { + .name = "dpll3_m3_ck", + .parent = &dpll3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_DIV_DPLL3_MASK, + .clksel = div16_dpll3_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll3_m3x2_ck = { + .name = "dpll3_m3x2_ck", + .parent = &dpll3_m3_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel emu_core_alwon_ck_clksel[] = { + { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk emu_core_alwon_ck = { + .name = "emu_core_alwon_ck", + .parent = &dpll3_m3x2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .clksel_mask = OMAP3430_ST_CORE_CLK, + .clksel = emu_core_alwon_ck_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* DPLL4 */ +/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */ +/* Type: DPLL */ +static const struct dpll_data dpll4_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), + .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, + .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, + .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT, +}; + +static struct clk dpll4_ck = { + .name = "dpll4_ck", + .parent = &sys_ck, + .dpll_data = &dpll4_dd, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed -- + * XXX does this serve any downstream clocks? + */ +static struct clk dpll4_x2_ck = { + .name = "dpll4_x2_ck", + .parent = &dpll4_ck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel div16_dpll4_clksel[] = { + { .parent = &dpll4_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* This virtual clock is the source for dpll4_m2x2_ck */ +static struct clk dpll4_m2_ck = { + .name = "dpll4_m2_ck", + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), + .clksel_mask = OMAP3430_DIV_96M_MASK, + .clksel = div16_dpll4_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m2x2_ck = { + .name = "dpll4_m2x2_ck", + .parent = &dpll4_m2_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_96M_SHIFT, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel omap_96m_alwon_fck_clksel[] = { + { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk omap_96m_alwon_fck = { + .name = "omap_96m_alwon_fck", + .parent = &dpll4_m2x2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .clksel_mask = OMAP3430_ST_PERIPH_CLK, + .clksel = omap_96m_alwon_fck_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk omap_96m_fck = { + .name = "omap_96m_fck", + .parent = &omap_96m_alwon_fck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static const struct clksel cm_96m_fck_clksel[] = { + { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk cm_96m_fck = { + .name = "cm_96m_fck", + .parent = &dpll4_m2x2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .clksel_mask = OMAP3430_ST_PERIPH_CLK, + .clksel = cm_96m_fck_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* This virtual clock is the source for dpll4_m3x2_ck */ +static struct clk dpll4_m3_ck = { + .name = "dpll4_m3_ck", + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_TV_MASK, + .clksel = div16_dpll4_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m3x2_ck = { + .name = "dpll4_m3x2_ck", + .parent = &dpll4_m3_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_TV_SHIFT, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel virt_omap_54m_fck_clksel[] = { + { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk virt_omap_54m_fck = { + .name = "virt_omap_54m_fck", + .parent = &dpll4_m3x2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .clksel_mask = OMAP3430_ST_PERIPH_CLK, + .clksel = virt_omap_54m_fck_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate omap_54m_d4m3x2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_54m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_54m_clksel[] = { + { .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates }, + { .parent = &sys_altclk, .rates = omap_54m_alt_rates }, + { .parent = NULL } +}; + +static struct clk omap_54m_fck = { + .name = "omap_54m_fck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_54M, + .clksel = omap_54m_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate omap_48m_96md2_rates[] = { + { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_48m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_48m_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates }, + { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, + { .parent = NULL } +}; + +static struct clk omap_48m_fck = { + .name = "omap_48m_fck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_48M, + .clksel = omap_48m_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk omap_12m_fck = { + .name = "omap_12m_fck", + .parent = &omap_48m_fck, + .fixed_div = 4, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_fixed_divisor_recalc, +}; + +/* This virstual clock is the source for dpll4_m4x2_ck */ +static struct clk dpll4_m4_ck = { + .name = "dpll4_m4_ck", + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, + .clksel = div16_dpll4_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m4x2_ck = { + .name = "dpll4_m4x2_ck", + .parent = &dpll4_m4_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .recalc = &omap3_clkoutx2_recalc, +}; + +/* This virtual clock is the source for dpll4_m5x2_ck */ +static struct clk dpll4_m5_ck = { + .name = "dpll4_m5_ck", + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, + .clksel = div16_dpll4_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m5x2_ck = { + .name = "dpll4_m5x2_ck", + .parent = &dpll4_m5_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .recalc = &omap3_clkoutx2_recalc, +}; + +/* This virtual clock is the source for dpll4_m6x2_ck */ +static struct clk dpll4_m6_ck = { + .name = "dpll4_m6_ck", + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_DIV_DPLL4_MASK, + .clksel = div16_dpll4_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m6x2_ck = { + .name = "dpll4_m6x2_ck", + .parent = &dpll4_m6_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .recalc = &omap3_clkoutx2_recalc, +}; + +static struct clk emu_per_alwon_ck = { + .name = "emu_per_alwon_ck", + .parent = &dpll4_m6x2_ck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +/* DPLL5 */ +/* Supplies 120MHz clock, USIM source clock */ +/* Type: DPLL */ +/* 3430ES2 only */ +static const struct dpll_data dpll5_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), + .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, + .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), + .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, + .auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT, +}; + +static struct clk dpll5_ck = { + .name = "dpll5_ck", + .parent = &sys_ck, + .dpll_data = &dpll5_dd, + .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES | + ALWAYS_ENABLED, + .recalc = &omap3_dpll_recalc, +}; + +static const struct clksel div16_dpll5_clksel[] = { + { .parent = &dpll5_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +static struct clk dpll5_m2_ck = { + .name = "dpll5_m2_ck", + .parent = &dpll5_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), + .clksel_mask = OMAP3430ES2_DIV_120M_MASK, + .clksel = div16_dpll5_clksel, + .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel omap_120m_fck_clksel[] = { + { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &dpll5_m2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk omap_120m_fck = { + .name = "omap_120m_fck", + .parent = &dpll5_m2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), + .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, + .clksel = omap_120m_fck_clksel, + .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* CM EXTERNAL CLOCK OUTPUTS */ + +static const struct clksel_rate clkout2_src_core_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_96m_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_54m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel clkout2_src_clksel[] = { + { .parent = &core_ck, .rates = clkout2_src_core_rates }, + { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, + { .parent = &omap_96m_alwon_fck, .rates = clkout2_src_96m_rates }, + { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, + { .parent = NULL } +}; + +static struct clk clkout2_src_ck = { + .name = "clkout2_src_ck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP3430_CM_CLKOUT_CTRL, + .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, + .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, + .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, + .clksel = clkout2_src_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate sys_clkout2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 1, .flags = RATE_IN_343X }, + { .div = 4, .val = 2, .flags = RATE_IN_343X }, + { .div = 8, .val = 3, .flags = RATE_IN_343X }, + { .div = 16, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel sys_clkout2_clksel[] = { + { .parent = &clkout2_src_ck, .rates = sys_clkout2_rates }, + { .parent = NULL }, +}; + +static struct clk sys_clkout2 = { + .name = "sys_clkout2", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, + .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, + .clksel = sys_clkout2_clksel, + .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* CM OUTPUT CLOCKS */ + +static struct clk corex2_fck = { + .name = "corex2_fck", + .parent = &dpll3_m2x2_ck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +/* DPLL power domain clock controls */ + +static const struct clksel div2_core_clksel[] = { + { .parent = &core_ck, .rates = div2_rates }, + { .parent = NULL } +}; + +/* + * REVISIT: Are these in DPLL power domain or CM power domain? docs + * may be inconsistent here? + */ +static struct clk dpll1_fck = { + .name = "dpll1_fck", + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), + .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, + .clksel = div2_core_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* + * MPU clksel: + * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck + * derives from the high-frequency bypass clock originating from DPLL3, + * called 'dpll1_fck' + */ +static const struct clksel mpu_clksel[] = { + { .parent = &dpll1_fck, .rates = dpll_bypass_rates }, + { .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk mpu_ck = { + .name = "mpu_ck", + .parent = &dpll1_x2m2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), + .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, + .clksel = mpu_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */ +static const struct clksel_rate arm_fck_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 1, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel arm_fck_clksel[] = { + { .parent = &mpu_ck, .rates = arm_fck_rates }, + { .parent = NULL } +}; + +static struct clk arm_fck = { + .name = "arm_fck", + .parent = &mpu_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), + .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, + .clksel = arm_fck_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* + * REVISIT: This clock is never specifically defined in the 3430 TRM, + * although it is referenced - so this is a guess + */ +static struct clk emu_mpu_alwon_ck = { + .name = "emu_mpu_alwon_ck", + .parent = &mpu_ck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk dpll2_fck = { + .name = "dpll2_fck", + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), + .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, + .clksel = div2_core_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* + * IVA2 clksel: + * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck + * derives from the high-frequency bypass clock originating from DPLL3, + * called 'dpll2_fck' + */ + +static const struct clksel iva2_clksel[] = { + { .parent = &dpll2_fck, .rates = dpll_bypass_rates }, + { .parent = &dpll2_m2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk iva2_ck = { + .name = "iva2_ck", + .parent = &dpll2_m2_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, + OMAP3430_CM_IDLEST_PLL), + .clksel_mask = OMAP3430_ST_IVA2_CLK_MASK, + .clksel = iva2_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .recalc = &omap2_clksel_recalc, +}; + +/* Common interface clocks */ + +static struct clk l3_ick = { + .name = "l3_ick", + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_L3_MASK, + .clksel = div2_core_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel div2_l3_clksel[] = { + { .parent = &l3_ick, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk l4_ick = { + .name = "l4_ick", + .parent = &l3_ick, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_L4_MASK, + .clksel = div2_l3_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, + +}; + +static const struct clksel div2_l4_clksel[] = { + { .parent = &l4_ick, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk rm_ick = { + .name = "rm_ick", + .parent = &l4_ick, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_RM_MASK, + .clksel = div2_l4_clksel, + .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK, + .recalc = &omap2_clksel_recalc, +}; + +/* GFX power domain */ + +/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */ + +static const struct clksel gfx_l3_clksel[] = { + { .parent = &l3_ick, .rates = gfx_l3_rates }, + { .parent = NULL } +}; + +static struct clk gfx_l3_fck = { + .name = "gfx_l3_fck", + .parent = &l3_ick, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), + .enable_bit = OMAP_EN_GFX_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), + .clksel_mask = OMAP_CLKSEL_GFX_MASK, + .clksel = gfx_l3_clksel, + .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_l3_ick = { + .name = "gfx_l3_ick", + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), + .enable_bit = OMAP_EN_GFX_SHIFT, + .flags = CLOCK_IN_OMAP3430ES1, + .recalc = &followparent_recalc, +}; + +static struct clk gfx_cg1_ck = { + .name = "gfx_cg1_ck", + .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES1_EN_2D_SHIFT, + .flags = CLOCK_IN_OMAP3430ES1, + .recalc = &followparent_recalc, +}; + +static struct clk gfx_cg2_ck = { + .name = "gfx_cg2_ck", + .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES1_EN_3D_SHIFT, + .flags = CLOCK_IN_OMAP3430ES1, + .recalc = &followparent_recalc, +}; + +/* SGX power domain - 3430ES2 only */ + +static const struct clksel_rate sgx_core_rates[] = { + { .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 4, .val = 1, .flags = RATE_IN_343X }, + { .div = 6, .val = 2, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel_rate sgx_96m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel sgx_clksel[] = { + { .parent = &core_ck, .rates = sgx_core_rates }, + { .parent = &cm_96m_fck, .rates = sgx_96m_rates }, + { .parent = NULL }, +}; + +static struct clk sgx_fck = { + .name = "sgx_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, + .clksel = sgx_clksel, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk sgx_ick = { + .name = "sgx_ick", + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +/* CORE power domain */ + +static struct clk d2d_26m_fck = { + .name = "d2d_26m_fck", + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, + .flags = CLOCK_IN_OMAP3430ES1, + .recalc = &followparent_recalc, +}; + +static const struct clksel omap343x_gpt_clksel[] = { + { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, + { .parent = &sys_ck, .rates = gpt_sys_rates }, + { .parent = NULL} +}; + +static struct clk gpt10_fck = { + .name = "gpt10_fck", + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_GPT10_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt11_fck = { + .name = "gpt11_fck", + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_GPT11_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk cpefuse_fck = { + .name = "cpefuse_fck", + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +static struct clk ts_fck = { + .name = "ts_fck", + .parent = &omap_32k_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_TS_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +static struct clk usbtll_fck = { + .name = "usbtll_fck", + .parent = &omap_120m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +/* CORE 96M FCLK-derived clocks */ + +static struct clk core_96m_fck = { + .name = "core_96m_fck", + .parent = &omap_96m_fck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs3_fck = { + .name = "mmchs_fck", + .id = 3, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_fck = { + .name = "mmchs_fck", + .id = 2, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MMC2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mspro_fck = { + .name = "mspro_fck", + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MSPRO_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_fck = { + .name = "mmchs_fck", + .id = 1, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MMC1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_fck = { + .name = "i2c_fck", + .id = 3, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_fck = { + .name = "i2c_fck", + .id = 2, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_fck = { + .name = "i2c_fck", + .id = 1, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +/* + * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck; + * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck. + */ +static const struct clksel_rate common_mcbsp_96m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel mcbsp_15_clksel[] = { + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + +static struct clk mcbsp5_fck = { + .name = "mcbsp5_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, + .clksel = mcbsp_15_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp1_fck = { + .name = "mcbsp1_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, + .clksel = mcbsp_15_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +/* CORE_48M_FCK-derived clocks */ + +static struct clk core_48m_fck = { + .name = "core_48m_fck", + .parent = &omap_48m_fck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_fck = { + .name = "mcspi_fck", + .id = 4, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_fck = { + .name = "mcspi_fck", + .id = 3, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_fck = { + .name = "mcspi_fck", + .id = 2, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_fck = { + .name = "mcspi_fck", + .id = 1, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_fck = { + .name = "uart2_fck", + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_fck = { + .name = "uart1_fck", + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk fshostusb_fck = { + .name = "fshostusb_fck", + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, + .flags = CLOCK_IN_OMAP3430ES1, + .recalc = &followparent_recalc, +}; + +/* CORE_12M_FCK based clocks */ + +static struct clk core_12m_fck = { + .name = "core_12m_fck", + .parent = &omap_12m_fck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk hdq_fck = { + .name = "hdq_fck", + .parent = &core_12m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_HDQ_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +/* DPLL3-derived clock */ + +static const struct clksel_rate ssi_ssr_corex2_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel ssi_ssr_clksel[] = { + { .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates }, + { .parent = NULL } +}; + +static struct clk ssi_ssr_fck = { + .name = "ssi_ssr_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_sst_fck = { + .name = "ssi_sst_fck", + .parent = &ssi_ssr_fck, + .fixed_div = 2, + .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK, + .recalc = &omap2_fixed_divisor_recalc, +}; + + + +/* CORE_L3_ICK based clocks */ + +static struct clk core_l3_ick = { + .name = "core_l3_ick", + .parent = &l3_ick, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick = { + .name = "hsotgusb_ick", + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk sdrc_ick = { + .name = "sdrc_ick", + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SDRC_SHIFT, + .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, + .recalc = &followparent_recalc, +}; + +static struct clk gpmc_fck = { + .name = "gpmc_fck", + .parent = &core_l3_ick, + .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK | + ENABLE_ON_INIT, + .recalc = &followparent_recalc, +}; + +/* SECURITY_L3_ICK based clocks */ + +static struct clk security_l3_ick = { + .name = "security_l3_ick", + .parent = &l3_ick, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk pka_ick = { + .name = "pka_ick", + .parent = &security_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_PKA_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +/* CORE_L4_ICK based clocks */ + +static struct clk core_l4_ick = { + .name = "core_l4_ick", + .parent = &l4_ick, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk usbtll_ick = { + .name = "usbtll_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs3_ick = { + .name = "mmchs_ick", + .id = 3, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +/* Intersystem Communication Registers - chassis mode only */ +static struct clk icr_ick = { + .name = "icr_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_ICR_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk aes2_ick = { + .name = "aes2_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_AES2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk sha12_ick = { + .name = "sha12_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SHA12_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk des2_ick = { + .name = "des2_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_DES2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_ick = { + .name = "mmchs_ick", + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MMC2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_ick = { + .name = "mmchs_ick", + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MMC1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mspro_ick = { + .name = "mspro_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MSPRO_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk hdq_ick = { + .name = "hdq_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HDQ_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_ick = { + .name = "mcspi_ick", + .id = 4, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_ick = { + .name = "mcspi_ick", + .id = 3, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_ick = { + .name = "mcspi_ick", + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_ick = { + .name = "mcspi_ick", + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_ick = { + .name = "i2c_ick", + .id = 3, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_ick = { + .name = "i2c_ick", + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_ick = { + .name = "i2c_ick", + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_ick = { + .name = "uart2_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_UART2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_ick = { + .name = "uart1_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_UART1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt11_ick = { + .name = "gpt11_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_GPT11_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt10_ick = { + .name = "gpt10_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_GPT10_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp5_ick = { + .name = "mcbsp5_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp1_ick = { + .name = "mcbsp1_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk fac_ick = { + .name = "fac_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, + .flags = CLOCK_IN_OMAP3430ES1, + .recalc = &followparent_recalc, +}; + +static struct clk mailboxes_ick = { + .name = "mailboxes_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk omapctrl_ick = { + .name = "omapctrl_ick", + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, + .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, + .recalc = &followparent_recalc, +}; + +/* SSI_L4_ICK based clocks */ + +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .parent = &l4_ick, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk ssi_ick = { + .name = "ssi_ick", + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +/* REVISIT: Technically the TRM claims that this is CORE_CLK based, + * but l4_ick makes more sense to me */ + +static const struct clksel usb_l4_clksel[] = { + { .parent = &l4_ick, .rates = div2_rates }, + { .parent = NULL }, +}; + +static struct clk usb_l4_ick = { + .name = "usb_l4_ick", + .parent = &l4_ick, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, + .clksel = usb_l4_clksel, + .flags = CLOCK_IN_OMAP3430ES1, + .recalc = &omap2_clksel_recalc, +}; + +/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */ + +/* SECURITY_L4_ICK2 based clocks */ + +static struct clk security_l4_ick2 = { + .name = "security_l4_ick2", + .parent = &l4_ick, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk aes1_ick = { + .name = "aes1_ick", + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_AES1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk rng_ick = { + .name = "rng_ick", + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_RNG_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk sha11_ick = { + .name = "sha11_ick", + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_SHA11_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk des1_ick = { + .name = "des1_ick", + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_DES1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +/* DSS */ +static const struct clksel dss1_alwon_fck_clksel[] = { + { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk dss1_alwon_fck = { + .name = "dss1_alwon_fck", + .parent = &dpll4_m4x2_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .clksel_mask = OMAP3430_ST_PERIPH_CLK, + .clksel = dss1_alwon_fck_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk dss_tv_fck = { + .name = "dss_tv_fck", + .parent = &omap_54m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_TV_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk dss_96m_fck = { + .name = "dss_96m_fck", + .parent = &omap_96m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_TV_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk dss2_alwon_fck = { + .name = "dss2_alwon_fck", + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk dss_ick = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +/* CAM */ + +static const struct clksel cam_mclk_clksel[] = { + { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates }, + { .parent = NULL } +}; + +static struct clk cam_mclk = { + .name = "cam_mclk", + .parent = &dpll4_m5x2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .clksel_mask = OMAP3430_ST_PERIPH_CLK, + .clksel = cam_mclk_clksel, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_CAM_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk cam_l3_ick = { + .name = "cam_l3_ick", + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_CAM_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk cam_l4_ick = { + .name = "cam_l4_ick", + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_CAM_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +/* USBHOST - 3430ES2 only */ + +static struct clk usbhost_120m_fck = { + .name = "usbhost_120m_fck", + .parent = &omap_120m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_48m_fck = { + .name = "usbhost_48m_fck", + .parent = &omap_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_l3_ick = { + .name = "usbhost_l3_ick", + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_l4_ick = { + .name = "usbhost_l4_ick", + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_sar_fck = { + .name = "usbhost_sar_fck", + .parent = &osc_sys_ck, + .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL), + .enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +/* WKUP */ + +static const struct clksel_rate usim_96m_rates[] = { + { .div = 2, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 8, .val = 5, .flags = RATE_IN_343X }, + { .div = 10, .val = 6, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel_rate usim_120m_rates[] = { + { .div = 4, .val = 7, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 16, .val = 9, .flags = RATE_IN_343X }, + { .div = 20, .val = 10, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel usim_clksel[] = { + { .parent = &omap_96m_fck, .rates = usim_96m_rates }, + { .parent = &omap_120m_fck, .rates = usim_120m_rates }, + { .parent = &sys_ck, .rates = div2_rates }, + { .parent = NULL }, +}; + +/* 3430ES2 only */ +static struct clk usim_fck = { + .name = "usim_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK, + .clksel = usim_clksel, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt1_fck = { + .name = "gpt1_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT1_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk wkup_32k_fck = { + .name = "wkup_32k_fck", + .parent = &omap_32k_fck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_fck = { + .name = "gpio1_fck", + .parent = &wkup_32k_fck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_fck = { + .name = "wdt2_fck", + .parent = &wkup_32k_fck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_WDT2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk wkup_l4_ick = { + .name = "wkup_l4_ick", + .parent = &sys_ck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &followparent_recalc, +}; + +/* 3430ES2 only */ +/* Never specifically named in the TRM, so we have to infer a likely name */ +static struct clk usim_ick = { + .name = "usim_ick", + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, + .flags = CLOCK_IN_OMAP3430ES2, + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_ick = { + .name = "wdt2_ick", + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk wdt1_ick = { + .name = "wdt1_ick", + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_ick = { + .name = "gpio1_ick", + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk omap_32ksync_ick = { + .name = "omap_32ksync_ick", + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt12_ick = { + .name = "gpt12_ick", + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT12_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt1_ick = { + .name = "gpt1_ick", + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT1_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + + + +/* PER clock domain */ + +static struct clk per_96m_fck = { + .name = "per_96m_fck", + .parent = &omap_96m_alwon_fck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk per_48m_fck = { + .name = "per_48m_fck", + .parent = &omap_48m_fck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk uart3_fck = { + .name = "uart3_fck", + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_UART3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt2_fck = { + .name = "gpt2_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT2_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt3_fck = { + .name = "gpt3_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT3_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt4_fck = { + .name = "gpt4_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT4_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt5_fck = { + .name = "gpt5_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT5_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt6_fck = { + .name = "gpt6_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT6_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt7_fck = { + .name = "gpt7_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT7_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt8_fck = { + .name = "gpt8_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT8_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt9_fck = { + .name = "gpt9_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT9_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, + .clksel = omap343x_gpt_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk per_32k_alwon_fck = { + .name = "per_32k_alwon_fck", + .parent = &omap_32k_fck, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_fck = { + .name = "gpio6_fck", + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO6_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_fck = { + .name = "gpio5_fck", + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO5_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_fck = { + .name = "gpio4_fck", + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO4_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_fck = { + .name = "gpio3_fck", + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_fck = { + .name = "gpio2_fck", + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_fck = { + .name = "wdt3_fck", + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_WDT3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk per_l4_ick = { + .name = "per_l4_ick", + .parent = &l4_ick, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_ick = { + .name = "gpio6_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO6_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_ick = { + .name = "gpio5_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO5_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_ick = { + .name = "gpio4_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO4_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_ick = { + .name = "gpio3_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_ick = { + .name = "gpio2_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_ick = { + .name = "wdt3_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk uart3_ick = { + .name = "uart3_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_UART3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt9_ick = { + .name = "gpt9_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT9_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt8_ick = { + .name = "gpt8_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT8_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt7_ick = { + .name = "gpt7_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT7_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt6_ick = { + .name = "gpt6_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT6_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt5_ick = { + .name = "gpt5_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT5_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt4_ick = { + .name = "gpt4_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT4_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt3_ick = { + .name = "gpt3_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk gpt2_ick = { + .name = "gpt2_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp2_ick = { + .name = "mcbsp2_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp3_ick = { + .name = "mcbsp3_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp4_ick = { + .name = "mcbsp4_ick", + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +static const struct clksel mcbsp_234_clksel[] = { + { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + +static struct clk mcbsp2_fck = { + .name = "mcbsp2_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp3_fck = { + .name = "mcbsp3_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp4_fck = { + .name = "mcbsp4_fck", + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .flags = CLOCK_IN_OMAP343X, + .recalc = &omap2_clksel_recalc, +}; + +/* EMU clocks */ + +/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */ + +static const struct clksel_rate emu_src_sys_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_per_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_mpu_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel emu_src_clksel[] = { + { .parent = &sys_ck, .rates = emu_src_sys_rates }, + { .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates }, + { .parent = &emu_per_alwon_ck, .rates = emu_src_per_rates }, + { .parent = &emu_mpu_alwon_ck, .rates = emu_src_mpu_rates }, + { .parent = NULL }, +}; + +/* + * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only + * to switch the source of some of the EMU clocks. + * XXX Are there CLKEN bits for these EMU clks? + */ +static struct clk emu_src_ck = { + .name = "emu_src_ck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_MUX_CTRL_MASK, + .clksel = emu_src_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate pclk_emu_rates[] = { + { .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel pclk_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = pclk_emu_rates }, + { .parent = NULL }, +}; + +static struct clk pclk_fck = { + .name = "pclk_fck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, + .clksel = pclk_emu_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate pclkx2_emu_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel pclkx2_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = pclkx2_emu_rates }, + { .parent = NULL }, +}; + +static struct clk pclkx2_fck = { + .name = "pclkx2_fck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, + .clksel = pclkx2_emu_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel atclk_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = div2_rates }, + { .parent = NULL }, +}; + +static struct clk atclk_fck = { + .name = "atclk_fck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, + .clksel = atclk_emu_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk traceclk_src_fck = { + .name = "traceclk_src_fck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, + .clksel = emu_src_clksel, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate traceclk_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel traceclk_clksel[] = { + { .parent = &traceclk_src_fck, .rates = traceclk_rates }, + { .parent = NULL }, +}; + +static struct clk traceclk_fck = { + .name = "traceclk_fck", + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, + .clksel = traceclk_clksel, + .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, + .recalc = &omap2_clksel_recalc, +}; + +/* SR clocks */ + +/* SmartReflex fclk (VDD1) */ +static struct clk sr1_fck = { + .name = "sr1_fck", + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_SR1_SHIFT, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .recalc = &followparent_recalc, +}; + +/* SmartReflex fclk (VDD2) */ +static struct clk sr2_fck = { + .name = "sr2_fck", + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_SR2_SHIFT, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .recalc = &followparent_recalc, +}; + +static struct clk sr_l4_ick = { + .name = "sr_l4_ick", + .parent = &l4_ick, + .flags = CLOCK_IN_OMAP343X, + .recalc = &followparent_recalc, +}; + +/* SECURE_32K_FCK clocks */ + +static struct clk gpt12_fck = { + .name = "gpt12_fck", + .parent = &secure_32k_fck, + .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, + .recalc = &followparent_recalc, +}; + +static struct clk wdt1_fck = { + .name = "wdt1_fck", + .parent = &secure_32k_fck, + .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, + .recalc = &followparent_recalc, +}; + +static struct clk *onchip_34xx_clks[] __initdata = { + &omap_32k_fck, + &virt_12m_ck, + &virt_13m_ck, + &virt_16_8m_ck, + &virt_19_2m_ck, + &virt_26m_ck, + &virt_38_4m_ck, + &osc_sys_ck, + &sys_ck, + &sys_altclk, + &mcbsp_clks, + &sys_clkout1, + &dpll1_ck, + &dpll1_x2_ck, + &dpll1_x2m2_ck, + &dpll2_ck, + &dpll2_m2_ck, + &dpll3_ck, + &core_ck, + &dpll3_x2_ck, + &dpll3_m2_ck, + &dpll3_m2x2_ck, + &dpll3_m3_ck, + &dpll3_m3x2_ck, + &emu_core_alwon_ck, + &dpll4_ck, + &dpll4_x2_ck, + &omap_96m_alwon_fck, + &omap_96m_fck, + &cm_96m_fck, + &virt_omap_54m_fck, + &omap_54m_fck, + &omap_48m_fck, + &omap_12m_fck, + &dpll4_m2_ck, + &dpll4_m2x2_ck, + &dpll4_m3_ck, + &dpll4_m3x2_ck, + &dpll4_m4_ck, + &dpll4_m4x2_ck, + &dpll4_m5_ck, + &dpll4_m5x2_ck, + &dpll4_m6_ck, + &dpll4_m6x2_ck, + &emu_per_alwon_ck, + &dpll5_ck, + &dpll5_m2_ck, + &omap_120m_fck, + &clkout2_src_ck, + &sys_clkout2, + &corex2_fck, + &dpll1_fck, + &mpu_ck, + &arm_fck, + &emu_mpu_alwon_ck, + &dpll2_fck, + &iva2_ck, + &l3_ick, + &l4_ick, + &rm_ick, + &gfx_l3_fck, + &gfx_l3_ick, + &gfx_cg1_ck, + &gfx_cg2_ck, + &sgx_fck, + &sgx_ick, + &d2d_26m_fck, + &gpt10_fck, + &gpt11_fck, + &cpefuse_fck, + &ts_fck, + &usbtll_fck, + &core_96m_fck, + &mmchs3_fck, + &mmchs2_fck, + &mspro_fck, + &mmchs1_fck, + &i2c3_fck, + &i2c2_fck, + &i2c1_fck, + &mcbsp5_fck, + &mcbsp1_fck, + &core_48m_fck, + &mcspi4_fck, + &mcspi3_fck, + &mcspi2_fck, + &mcspi1_fck, + &uart2_fck, + &uart1_fck, + &fshostusb_fck, + &core_12m_fck, + &hdq_fck, + &ssi_ssr_fck, + &ssi_sst_fck, + &core_l3_ick, + &hsotgusb_ick, + &sdrc_ick, + &gpmc_fck, + &security_l3_ick, + &pka_ick, + &core_l4_ick, + &usbtll_ick, + &mmchs3_ick, + &icr_ick, + &aes2_ick, + &sha12_ick, + &des2_ick, + &mmchs2_ick, + &mmchs1_ick, + &mspro_ick, + &hdq_ick, + &mcspi4_ick, + &mcspi3_ick, + &mcspi2_ick, + &mcspi1_ick, + &i2c3_ick, + &i2c2_ick, + &i2c1_ick, + &uart2_ick, + &uart1_ick, + &gpt11_ick, + &gpt10_ick, + &mcbsp5_ick, + &mcbsp1_ick, + &fac_ick, + &mailboxes_ick, + &omapctrl_ick, + &ssi_l4_ick, + &ssi_ick, + &usb_l4_ick, + &security_l4_ick2, + &aes1_ick, + &rng_ick, + &sha11_ick, + &des1_ick, + &dss1_alwon_fck, + &dss_tv_fck, + &dss_96m_fck, + &dss2_alwon_fck, + &dss_ick, + &cam_mclk, + &cam_l3_ick, + &cam_l4_ick, + &usbhost_120m_fck, + &usbhost_48m_fck, + &usbhost_l3_ick, + &usbhost_l4_ick, + &usbhost_sar_fck, + &usim_fck, + &gpt1_fck, + &wkup_32k_fck, + &gpio1_fck, + &wdt2_fck, + &wkup_l4_ick, + &usim_ick, + &wdt2_ick, + &wdt1_ick, + &gpio1_ick, + &omap_32ksync_ick, + &gpt12_ick, + &gpt1_ick, + &per_96m_fck, + &per_48m_fck, + &uart3_fck, + &gpt2_fck, + &gpt3_fck, + &gpt4_fck, + &gpt5_fck, + &gpt6_fck, + &gpt7_fck, + &gpt8_fck, + &gpt9_fck, + &per_32k_alwon_fck, + &gpio6_fck, + &gpio5_fck, + &gpio4_fck, + &gpio3_fck, + &gpio2_fck, + &wdt3_fck, + &per_l4_ick, + &gpio6_ick, + &gpio5_ick, + &gpio4_ick, + &gpio3_ick, + &gpio2_ick, + &wdt3_ick, + &uart3_ick, + &gpt9_ick, + &gpt8_ick, + &gpt7_ick, + &gpt6_ick, + &gpt5_ick, + &gpt4_ick, + &gpt3_ick, + &gpt2_ick, + &mcbsp2_ick, + &mcbsp3_ick, + &mcbsp4_ick, + &mcbsp2_fck, + &mcbsp3_fck, + &mcbsp4_fck, + &emu_src_ck, + &pclk_fck, + &pclkx2_fck, + &atclk_fck, + &traceclk_src_fck, + &traceclk_fck, + &sr1_fck, + &sr2_fck, + &sr_l4_ick, + &secure_32k_fck, + &gpt12_fck, + &wdt1_fck, +}; + +#endif diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h new file mode 100644 index 000000000000..20ac38100678 --- /dev/null +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -0,0 +1,401 @@ +#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H + +/* + * OMAP24XX Clock Management register bits + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "cm.h" + +/* Bits shared between registers */ + +/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */ +#define OMAP24XX_EN_CAM_SHIFT 31 +#define OMAP24XX_EN_CAM (1 << 31) +#define OMAP24XX_EN_WDT4_SHIFT 29 +#define OMAP24XX_EN_WDT4 (1 << 29) +#define OMAP2420_EN_WDT3_SHIFT 28 +#define OMAP2420_EN_WDT3 (1 << 28) +#define OMAP24XX_EN_MSPRO_SHIFT 27 +#define OMAP24XX_EN_MSPRO (1 << 27) +#define OMAP24XX_EN_FAC_SHIFT 25 +#define OMAP24XX_EN_FAC (1 << 25) +#define OMAP2420_EN_EAC_SHIFT 24 +#define OMAP2420_EN_EAC (1 << 24) +#define OMAP24XX_EN_HDQ_SHIFT 23 +#define OMAP24XX_EN_HDQ (1 << 23) +#define OMAP2420_EN_I2C2_SHIFT 20 +#define OMAP2420_EN_I2C2 (1 << 20) +#define OMAP2420_EN_I2C1_SHIFT 19 +#define OMAP2420_EN_I2C1 (1 << 19) + +/* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */ +#define OMAP2430_EN_MCBSP5_SHIFT 5 +#define OMAP2430_EN_MCBSP5 (1 << 5) +#define OMAP2430_EN_MCBSP4_SHIFT 4 +#define OMAP2430_EN_MCBSP4 (1 << 4) +#define OMAP2430_EN_MCBSP3_SHIFT 3 +#define OMAP2430_EN_MCBSP3 (1 << 3) +#define OMAP24XX_EN_SSI_SHIFT 1 +#define OMAP24XX_EN_SSI (1 << 1) + +/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */ +#define OMAP24XX_EN_MPU_WDT_SHIFT 3 +#define OMAP24XX_EN_MPU_WDT (1 << 3) + +/* Bits specific to each register */ + +/* CM_IDLEST_MPU */ +/* 2430 only */ +#define OMAP2430_ST_MPU (1 << 0) + +/* CM_CLKSEL_MPU */ +#define OMAP24XX_CLKSEL_MPU_SHIFT 0 +#define OMAP24XX_CLKSEL_MPU_MASK (0x1f << 0) + +/* CM_CLKSTCTRL_MPU */ +#define OMAP24XX_AUTOSTATE_MPU (1 << 0) + +/* CM_FCLKEN1_CORE specific bits*/ +#define OMAP24XX_EN_TV_SHIFT 2 +#define OMAP24XX_EN_TV (1 << 2) +#define OMAP24XX_EN_DSS2_SHIFT 1 +#define OMAP24XX_EN_DSS2 (1 << 1) +#define OMAP24XX_EN_DSS1_SHIFT 0 +#define OMAP24XX_EN_DSS1 (1 << 0) + +/* CM_FCLKEN2_CORE specific bits */ +#define OMAP2430_EN_I2CHS2_SHIFT 20 +#define OMAP2430_EN_I2CHS2 (1 << 20) +#define OMAP2430_EN_I2CHS1_SHIFT 19 +#define OMAP2430_EN_I2CHS1 (1 << 19) +#define OMAP2430_EN_MMCHSDB2_SHIFT 17 +#define OMAP2430_EN_MMCHSDB2 (1 << 17) +#define OMAP2430_EN_MMCHSDB1_SHIFT 16 +#define OMAP2430_EN_MMCHSDB1 (1 << 16) + +/* CM_ICLKEN1_CORE specific bits */ +#define OMAP24XX_EN_MAILBOXES_SHIFT 30 +#define OMAP24XX_EN_MAILBOXES (1 << 30) +#define OMAP24XX_EN_DSS_SHIFT 0 +#define OMAP24XX_EN_DSS (1 << 0) + +/* CM_ICLKEN2_CORE specific bits */ + +/* CM_ICLKEN3_CORE */ +/* 2430 only */ +#define OMAP2430_EN_SDRC_SHIFT 2 +#define OMAP2430_EN_SDRC (1 << 2) + +/* CM_ICLKEN4_CORE */ +#define OMAP24XX_EN_PKA_SHIFT 4 +#define OMAP24XX_EN_PKA (1 << 4) +#define OMAP24XX_EN_AES_SHIFT 3 +#define OMAP24XX_EN_AES (1 << 3) +#define OMAP24XX_EN_RNG_SHIFT 2 +#define OMAP24XX_EN_RNG (1 << 2) +#define OMAP24XX_EN_SHA_SHIFT 1 +#define OMAP24XX_EN_SHA (1 << 1) +#define OMAP24XX_EN_DES_SHIFT 0 +#define OMAP24XX_EN_DES (1 << 0) + +/* CM_IDLEST1_CORE specific bits */ +#define OMAP24XX_ST_MAILBOXES (1 << 30) +#define OMAP24XX_ST_WDT4 (1 << 29) +#define OMAP2420_ST_WDT3 (1 << 28) +#define OMAP24XX_ST_MSPRO (1 << 27) +#define OMAP24XX_ST_FAC (1 << 25) +#define OMAP2420_ST_EAC (1 << 24) +#define OMAP24XX_ST_HDQ (1 << 23) +#define OMAP24XX_ST_I2C2 (1 << 20) +#define OMAP24XX_ST_I2C1 (1 << 19) +#define OMAP24XX_ST_MCBSP2 (1 << 16) +#define OMAP24XX_ST_MCBSP1 (1 << 15) +#define OMAP24XX_ST_DSS (1 << 0) + +/* CM_IDLEST2_CORE */ +#define OMAP2430_ST_MCBSP5 (1 << 5) +#define OMAP2430_ST_MCBSP4 (1 << 4) +#define OMAP2430_ST_MCBSP3 (1 << 3) +#define OMAP24XX_ST_SSI (1 << 1) + +/* CM_IDLEST3_CORE */ +/* 2430 only */ +#define OMAP2430_ST_SDRC (1 << 2) + +/* CM_IDLEST4_CORE */ +#define OMAP24XX_ST_PKA (1 << 4) +#define OMAP24XX_ST_AES (1 << 3) +#define OMAP24XX_ST_RNG (1 << 2) +#define OMAP24XX_ST_SHA (1 << 1) +#define OMAP24XX_ST_DES (1 << 0) + +/* CM_AUTOIDLE1_CORE */ +#define OMAP24XX_AUTO_CAM (1 << 31) +#define OMAP24XX_AUTO_MAILBOXES (1 << 30) +#define OMAP24XX_AUTO_WDT4 (1 << 29) +#define OMAP2420_AUTO_WDT3 (1 << 28) +#define OMAP24XX_AUTO_MSPRO (1 << 27) +#define OMAP2420_AUTO_MMC (1 << 26) +#define OMAP24XX_AUTO_FAC (1 << 25) +#define OMAP2420_AUTO_EAC (1 << 24) +#define OMAP24XX_AUTO_HDQ (1 << 23) +#define OMAP24XX_AUTO_UART2 (1 << 22) +#define OMAP24XX_AUTO_UART1 (1 << 21) +#define OMAP24XX_AUTO_I2C2 (1 << 20) +#define OMAP24XX_AUTO_I2C1 (1 << 19) +#define OMAP24XX_AUTO_MCSPI2 (1 << 18) +#define OMAP24XX_AUTO_MCSPI1 (1 << 17) +#define OMAP24XX_AUTO_MCBSP2 (1 << 16) +#define OMAP24XX_AUTO_MCBSP1 (1 << 15) +#define OMAP24XX_AUTO_GPT12 (1 << 14) +#define OMAP24XX_AUTO_GPT11 (1 << 13) +#define OMAP24XX_AUTO_GPT10 (1 << 12) +#define OMAP24XX_AUTO_GPT9 (1 << 11) +#define OMAP24XX_AUTO_GPT8 (1 << 10) +#define OMAP24XX_AUTO_GPT7 (1 << 9) +#define OMAP24XX_AUTO_GPT6 (1 << 8) +#define OMAP24XX_AUTO_GPT5 (1 << 7) +#define OMAP24XX_AUTO_GPT4 (1 << 6) +#define OMAP24XX_AUTO_GPT3 (1 << 5) +#define OMAP24XX_AUTO_GPT2 (1 << 4) +#define OMAP2420_AUTO_VLYNQ (1 << 3) +#define OMAP24XX_AUTO_DSS (1 << 0) + +/* CM_AUTOIDLE2_CORE */ +#define OMAP2430_AUTO_MDM_INTC (1 << 11) +#define OMAP2430_AUTO_GPIO5 (1 << 10) +#define OMAP2430_AUTO_MCSPI3 (1 << 9) +#define OMAP2430_AUTO_MMCHS2 (1 << 8) +#define OMAP2430_AUTO_MMCHS1 (1 << 7) +#define OMAP2430_AUTO_USBHS (1 << 6) +#define OMAP2430_AUTO_MCBSP5 (1 << 5) +#define OMAP2430_AUTO_MCBSP4 (1 << 4) +#define OMAP2430_AUTO_MCBSP3 (1 << 3) +#define OMAP24XX_AUTO_UART3 (1 << 2) +#define OMAP24XX_AUTO_SSI (1 << 1) +#define OMAP24XX_AUTO_USB (1 << 0) + +/* CM_AUTOIDLE3_CORE */ +#define OMAP24XX_AUTO_SDRC (1 << 2) +#define OMAP24XX_AUTO_GPMC (1 << 1) +#define OMAP24XX_AUTO_SDMA (1 << 0) + +/* CM_AUTOIDLE4_CORE */ +#define OMAP24XX_AUTO_PKA (1 << 4) +#define OMAP24XX_AUTO_AES (1 << 3) +#define OMAP24XX_AUTO_RNG (1 << 2) +#define OMAP24XX_AUTO_SHA (1 << 1) +#define OMAP24XX_AUTO_DES (1 << 0) + +/* CM_CLKSEL1_CORE */ +#define OMAP24XX_CLKSEL_USB_SHIFT 25 +#define OMAP24XX_CLKSEL_USB_MASK (0x7 << 25) +#define OMAP24XX_CLKSEL_SSI_SHIFT 20 +#define OMAP24XX_CLKSEL_SSI_MASK (0x1f << 20) +#define OMAP2420_CLKSEL_VLYNQ_SHIFT 15 +#define OMAP2420_CLKSEL_VLYNQ_MASK (0x1f << 15) +#define OMAP24XX_CLKSEL_DSS2_SHIFT 13 +#define OMAP24XX_CLKSEL_DSS2_MASK (0x1 << 13) +#define OMAP24XX_CLKSEL_DSS1_SHIFT 8 +#define OMAP24XX_CLKSEL_DSS1_MASK (0x1f << 8) +#define OMAP24XX_CLKSEL_L4_SHIFT 5 +#define OMAP24XX_CLKSEL_L4_MASK (0x3 << 5) +#define OMAP24XX_CLKSEL_L3_SHIFT 0 +#define OMAP24XX_CLKSEL_L3_MASK (0x1f << 0) + +/* CM_CLKSEL2_CORE */ +#define OMAP24XX_CLKSEL_GPT12_SHIFT 22 +#define OMAP24XX_CLKSEL_GPT12_MASK (0x3 << 22) +#define OMAP24XX_CLKSEL_GPT11_SHIFT 20 +#define OMAP24XX_CLKSEL_GPT11_MASK (0x3 << 20) +#define OMAP24XX_CLKSEL_GPT10_SHIFT 18 +#define OMAP24XX_CLKSEL_GPT10_MASK (0x3 << 18) +#define OMAP24XX_CLKSEL_GPT9_SHIFT 16 +#define OMAP24XX_CLKSEL_GPT9_MASK (0x3 << 16) +#define OMAP24XX_CLKSEL_GPT8_SHIFT 14 +#define OMAP24XX_CLKSEL_GPT8_MASK (0x3 << 14) +#define OMAP24XX_CLKSEL_GPT7_SHIFT 12 +#define OMAP24XX_CLKSEL_GPT7_MASK (0x3 << 12) +#define OMAP24XX_CLKSEL_GPT6_SHIFT 10 +#define OMAP24XX_CLKSEL_GPT6_MASK (0x3 << 10) +#define OMAP24XX_CLKSEL_GPT5_SHIFT 8 +#define OMAP24XX_CLKSEL_GPT5_MASK (0x3 << 8) +#define OMAP24XX_CLKSEL_GPT4_SHIFT 6 +#define OMAP24XX_CLKSEL_GPT4_MASK (0x3 << 6) +#define OMAP24XX_CLKSEL_GPT3_SHIFT 4 +#define OMAP24XX_CLKSEL_GPT3_MASK (0x3 << 4) +#define OMAP24XX_CLKSEL_GPT2_SHIFT 2 +#define OMAP24XX_CLKSEL_GPT2_MASK (0x3 << 2) + +/* CM_CLKSTCTRL_CORE */ +#define OMAP24XX_AUTOSTATE_DSS (1 << 2) +#define OMAP24XX_AUTOSTATE_L4 (1 << 1) +#define OMAP24XX_AUTOSTATE_L3 (1 << 0) + +/* CM_FCLKEN_GFX */ +#define OMAP24XX_EN_3D_SHIFT 2 +#define OMAP24XX_EN_3D (1 << 2) +#define OMAP24XX_EN_2D_SHIFT 1 +#define OMAP24XX_EN_2D (1 << 1) + +/* CM_ICLKEN_GFX specific bits */ + +/* CM_IDLEST_GFX specific bits */ + +/* CM_CLKSEL_GFX specific bits */ + +/* CM_CLKSTCTRL_GFX */ +#define OMAP24XX_AUTOSTATE_GFX (1 << 0) + +/* CM_FCLKEN_WKUP specific bits */ + +/* CM_ICLKEN_WKUP specific bits */ +#define OMAP2430_EN_ICR_SHIFT 6 +#define OMAP2430_EN_ICR (1 << 6) +#define OMAP24XX_EN_OMAPCTRL_SHIFT 5 +#define OMAP24XX_EN_OMAPCTRL (1 << 5) +#define OMAP24XX_EN_WDT1_SHIFT 4 +#define OMAP24XX_EN_WDT1 (1 << 4) +#define OMAP24XX_EN_32KSYNC_SHIFT 1 +#define OMAP24XX_EN_32KSYNC (1 << 1) + +/* CM_IDLEST_WKUP specific bits */ +#define OMAP2430_ST_ICR (1 << 6) +#define OMAP24XX_ST_OMAPCTRL (1 << 5) +#define OMAP24XX_ST_WDT1 (1 << 4) +#define OMAP24XX_ST_MPU_WDT (1 << 3) +#define OMAP24XX_ST_32KSYNC (1 << 1) + +/* CM_AUTOIDLE_WKUP */ +#define OMAP24XX_AUTO_OMAPCTRL (1 << 5) +#define OMAP24XX_AUTO_WDT1 (1 << 4) +#define OMAP24XX_AUTO_MPU_WDT (1 << 3) +#define OMAP24XX_AUTO_GPIOS (1 << 2) +#define OMAP24XX_AUTO_32KSYNC (1 << 1) +#define OMAP24XX_AUTO_GPT1 (1 << 0) + +/* CM_CLKSEL_WKUP */ +#define OMAP24XX_CLKSEL_GPT1_SHIFT 0 +#define OMAP24XX_CLKSEL_GPT1_MASK (0x3 << 0) + +/* CM_CLKEN_PLL */ +#define OMAP24XX_EN_54M_PLL_SHIFT 6 +#define OMAP24XX_EN_54M_PLL_MASK (0x3 << 6) +#define OMAP24XX_EN_96M_PLL_SHIFT 2 +#define OMAP24XX_EN_96M_PLL_MASK (0x3 << 2) +#define OMAP24XX_EN_DPLL_SHIFT 0 +#define OMAP24XX_EN_DPLL_MASK (0x3 << 0) + +/* CM_IDLEST_CKGEN */ +#define OMAP24XX_ST_54M_APLL (1 << 9) +#define OMAP24XX_ST_96M_APLL (1 << 8) +#define OMAP24XX_ST_54M_CLK (1 << 6) +#define OMAP24XX_ST_12M_CLK (1 << 5) +#define OMAP24XX_ST_48M_CLK (1 << 4) +#define OMAP24XX_ST_96M_CLK (1 << 2) +#define OMAP24XX_ST_CORE_CLK_SHIFT 0 +#define OMAP24XX_ST_CORE_CLK_MASK (0x3 << 0) + +/* CM_AUTOIDLE_PLL */ +#define OMAP24XX_AUTO_54M_SHIFT 6 +#define OMAP24XX_AUTO_54M_MASK (0x3 << 6) +#define OMAP24XX_AUTO_96M_SHIFT 2 +#define OMAP24XX_AUTO_96M_MASK (0x3 << 2) +#define OMAP24XX_AUTO_DPLL_SHIFT 0 +#define OMAP24XX_AUTO_DPLL_MASK (0x3 << 0) + +/* CM_CLKSEL1_PLL */ +#define OMAP2430_MAXDPLLFASTLOCK_SHIFT 28 +#define OMAP2430_MAXDPLLFASTLOCK_MASK (0x7 << 28) +#define OMAP24XX_APLLS_CLKIN_SHIFT 23 +#define OMAP24XX_APLLS_CLKIN_MASK (0x7 << 23) +#define OMAP24XX_DPLL_MULT_SHIFT 12 +#define OMAP24XX_DPLL_MULT_MASK (0x3ff << 12) +#define OMAP24XX_DPLL_DIV_SHIFT 8 +#define OMAP24XX_DPLL_DIV_MASK (0xf << 8) +#define OMAP24XX_54M_SOURCE_SHIFT 5 +#define OMAP24XX_54M_SOURCE (1 << 5) +#define OMAP2430_96M_SOURCE_SHIFT 4 +#define OMAP2430_96M_SOURCE (1 << 4) +#define OMAP24XX_48M_SOURCE_SHIFT 3 +#define OMAP24XX_48M_SOURCE (1 << 3) +#define OMAP2430_ALTCLK_SOURCE_SHIFT 0 +#define OMAP2430_ALTCLK_SOURCE_MASK (0x7 << 0) + +/* CM_CLKSEL2_PLL */ +#define OMAP24XX_CORE_CLK_SRC_SHIFT 0 +#define OMAP24XX_CORE_CLK_SRC_MASK (0x3 << 0) + +/* CM_FCLKEN_DSP */ +#define OMAP2420_EN_IVA_COP_SHIFT 10 +#define OMAP2420_EN_IVA_COP (1 << 10) +#define OMAP2420_EN_IVA_MPU_SHIFT 8 +#define OMAP2420_EN_IVA_MPU (1 << 8) +#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT 0 +#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP (1 << 0) + +/* CM_ICLKEN_DSP */ +#define OMAP2420_EN_DSP_IPI_SHIFT 1 +#define OMAP2420_EN_DSP_IPI (1 << 1) + +/* CM_IDLEST_DSP */ +#define OMAP2420_ST_IVA (1 << 8) +#define OMAP2420_ST_IPI (1 << 1) +#define OMAP24XX_ST_DSP (1 << 0) + +/* CM_AUTOIDLE_DSP */ +#define OMAP2420_AUTO_DSP_IPI (1 << 1) + +/* CM_CLKSEL_DSP */ +#define OMAP2420_SYNC_IVA (1 << 13) +#define OMAP2420_CLKSEL_IVA_SHIFT 8 +#define OMAP2420_CLKSEL_IVA_MASK (0x1f << 8) +#define OMAP24XX_SYNC_DSP (1 << 7) +#define OMAP24XX_CLKSEL_DSP_IF_SHIFT 5 +#define OMAP24XX_CLKSEL_DSP_IF_MASK (0x3 << 5) +#define OMAP24XX_CLKSEL_DSP_SHIFT 0 +#define OMAP24XX_CLKSEL_DSP_MASK (0x1f << 0) + +/* CM_CLKSTCTRL_DSP */ +#define OMAP2420_AUTOSTATE_IVA (1 << 8) +#define OMAP24XX_AUTOSTATE_DSP (1 << 0) + +/* CM_FCLKEN_MDM */ +/* 2430 only */ +#define OMAP2430_EN_OSC_SHIFT 1 +#define OMAP2430_EN_OSC (1 << 1) + +/* CM_ICLKEN_MDM */ +/* 2430 only */ +#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT 0 +#define OMAP2430_CM_ICLKEN_MDM_EN_MDM (1 << 0) + +/* CM_IDLEST_MDM specific bits */ +/* 2430 only */ + +/* CM_AUTOIDLE_MDM */ +/* 2430 only */ +#define OMAP2430_AUTO_OSC (1 << 1) +#define OMAP2430_AUTO_MDM (1 << 0) + +/* CM_CLKSEL_MDM */ +/* 2430 only */ +#define OMAP2430_SYNC_MDM (1 << 4) +#define OMAP2430_CLKSEL_MDM_SHIFT 0 +#define OMAP2430_CLKSEL_MDM_MASK (0xf << 0) + +/* CM_CLKSTCTRL_MDM */ +/* 2430 only */ +#define OMAP2430_AUTOSTATE_MDM (1 << 0) + +#endif diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h new file mode 100644 index 000000000000..3c38395f6442 --- /dev/null +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -0,0 +1,674 @@ +#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H + +/* + * OMAP3430 Clock Management register bits + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "cm.h" + +/* Bits shared between registers */ + +/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */ +#define OMAP3430ES2_EN_MMC3_MASK (1 << 30) +#define OMAP3430ES2_EN_MMC3_SHIFT 30 +#define OMAP3430_EN_MSPRO (1 << 23) +#define OMAP3430_EN_MSPRO_SHIFT 23 +#define OMAP3430_EN_HDQ (1 << 22) +#define OMAP3430_EN_HDQ_SHIFT 22 +#define OMAP3430ES1_EN_FSHOSTUSB (1 << 5) +#define OMAP3430ES1_EN_FSHOSTUSB_SHIFT 5 +#define OMAP3430ES1_EN_D2D (1 << 3) +#define OMAP3430ES1_EN_D2D_SHIFT 3 +#define OMAP3430_EN_SSI (1 << 0) +#define OMAP3430_EN_SSI_SHIFT 0 + +/* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */ +#define OMAP3430ES2_EN_USBTLL_SHIFT 2 +#define OMAP3430ES2_EN_USBTLL_MASK (1 << 2) + +/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */ +#define OMAP3430_EN_WDT2 (1 << 5) +#define OMAP3430_EN_WDT2_SHIFT 5 + +/* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */ +#define OMAP3430_EN_CAM (1 << 0) +#define OMAP3430_EN_CAM_SHIFT 0 + +/* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */ +#define OMAP3430_EN_WDT3 (1 << 12) +#define OMAP3430_EN_WDT3_SHIFT 12 + +/* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */ +#define OMAP3430_OVERRIDE_ENABLE (1 << 19) + + +/* Bits specific to each register */ + +/* CM_FCLKEN_IVA2 */ +#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2 (1 << 0) +#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0 + +/* CM_CLKEN_PLL_IVA2 */ +#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT 8 +#define OMAP3430_IVA2_DPLL_RAMPTIME_MASK (0x3 << 8) +#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4 +#define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4) +#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_MASK (1 << 3) +#define OMAP3430_EN_IVA2_DPLL_SHIFT 0 +#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) + +/* CM_IDLEST_IVA2 */ +#define OMAP3430_ST_IVA2 (1 << 0) + +/* CM_IDLEST_PLL_IVA2 */ +#define OMAP3430_ST_IVA2_CLK (1 << 0) + +/* CM_AUTOIDLE_PLL_IVA2 */ +#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0 +#define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0) + +/* CM_CLKSEL1_PLL_IVA2 */ +#define OMAP3430_IVA2_CLK_SRC_SHIFT 19 +#define OMAP3430_IVA2_CLK_SRC_MASK (0x3 << 19) +#define OMAP3430_IVA2_DPLL_MULT_SHIFT 8 +#define OMAP3430_IVA2_DPLL_MULT_MASK (0x7ff << 8) +#define OMAP3430_IVA2_DPLL_DIV_SHIFT 0 +#define OMAP3430_IVA2_DPLL_DIV_MASK (0x7f << 0) + +/* CM_CLKSEL2_PLL_IVA2 */ +#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT 0 +#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK (0x1f << 0) + +/* CM_CLKSTCTRL_IVA2 */ +#define OMAP3430_CLKTRCTRL_IVA2_SHIFT 0 +#define OMAP3430_CLKTRCTRL_IVA2_MASK (0x3 << 0) + +/* CM_CLKSTST_IVA2 */ +#define OMAP3430_CLKACTIVITY_IVA2 (1 << 0) + +/* CM_REVISION specific bits */ + +/* CM_SYSCONFIG specific bits */ + +/* CM_CLKEN_PLL_MPU */ +#define OMAP3430_MPU_DPLL_RAMPTIME_SHIFT 8 +#define OMAP3430_MPU_DPLL_RAMPTIME_MASK (0x3 << 8) +#define OMAP3430_MPU_DPLL_FREQSEL_SHIFT 4 +#define OMAP3430_MPU_DPLL_FREQSEL_MASK (0xf << 4) +#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_MASK (1 << 3) +#define OMAP3430_EN_MPU_DPLL_SHIFT 0 +#define OMAP3430_EN_MPU_DPLL_MASK (0x7 << 0) + +/* CM_IDLEST_MPU */ +#define OMAP3430_ST_MPU (1 << 0) + +/* CM_IDLEST_PLL_MPU */ +#define OMAP3430_ST_MPU_CLK (1 << 0) +#define OMAP3430_ST_IVA2_CLK_MASK (1 << 0) + +/* CM_IDLEST_PLL_MPU */ +#define OMAP3430_ST_MPU_CLK_MASK (1 << 0) + +/* CM_AUTOIDLE_PLL_MPU */ +#define OMAP3430_AUTO_MPU_DPLL_SHIFT 0 +#define OMAP3430_AUTO_MPU_DPLL_MASK (0x7 << 0) + +/* CM_CLKSEL1_PLL_MPU */ +#define OMAP3430_MPU_CLK_SRC_SHIFT 19 +#define OMAP3430_MPU_CLK_SRC_MASK (0x3 << 19) +#define OMAP3430_MPU_DPLL_MULT_SHIFT 8 +#define OMAP3430_MPU_DPLL_MULT_MASK (0x7ff << 8) +#define OMAP3430_MPU_DPLL_DIV_SHIFT 0 +#define OMAP3430_MPU_DPLL_DIV_MASK (0x7f << 0) + +/* CM_CLKSEL2_PLL_MPU */ +#define OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT 0 +#define OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK (0x1f << 0) + +/* CM_CLKSTCTRL_MPU */ +#define OMAP3430_CLKTRCTRL_MPU_SHIFT 0 +#define OMAP3430_CLKTRCTRL_MPU_MASK (0x3 << 0) + +/* CM_CLKSTST_MPU */ +#define OMAP3430_CLKACTIVITY_MPU (1 << 0) + +/* CM_FCLKEN1_CORE specific bits */ + +/* CM_ICLKEN1_CORE specific bits */ +#define OMAP3430_EN_ICR (1 << 29) +#define OMAP3430_EN_ICR_SHIFT 29 +#define OMAP3430_EN_AES2 (1 << 28) +#define OMAP3430_EN_AES2_SHIFT 28 +#define OMAP3430_EN_SHA12 (1 << 27) +#define OMAP3430_EN_SHA12_SHIFT 27 +#define OMAP3430_EN_DES2 (1 << 26) +#define OMAP3430_EN_DES2_SHIFT 26 +#define OMAP3430ES1_EN_FAC (1 << 8) +#define OMAP3430ES1_EN_FAC_SHIFT 8 +#define OMAP3430_EN_MAILBOXES (1 << 7) +#define OMAP3430_EN_MAILBOXES_SHIFT 7 +#define OMAP3430_EN_OMAPCTRL (1 << 6) +#define OMAP3430_EN_OMAPCTRL_SHIFT 6 +#define OMAP3430_EN_SDRC (1 << 1) +#define OMAP3430_EN_SDRC_SHIFT 1 + +/* CM_ICLKEN2_CORE */ +#define OMAP3430_EN_PKA (1 << 4) +#define OMAP3430_EN_PKA_SHIFT 4 +#define OMAP3430_EN_AES1 (1 << 3) +#define OMAP3430_EN_AES1_SHIFT 3 +#define OMAP3430_EN_RNG (1 << 2) +#define OMAP3430_EN_RNG_SHIFT 2 +#define OMAP3430_EN_SHA11 (1 << 1) +#define OMAP3430_EN_SHA11_SHIFT 1 +#define OMAP3430_EN_DES1 (1 << 0) +#define OMAP3430_EN_DES1_SHIFT 0 + +/* CM_FCLKEN3_CORE specific bits */ +#define OMAP3430ES2_EN_TS_SHIFT 1 +#define OMAP3430ES2_EN_TS_MASK (1 << 1) +#define OMAP3430ES2_EN_CPEFUSE_SHIFT 0 +#define OMAP3430ES2_EN_CPEFUSE_MASK (1 << 0) + +/* CM_IDLEST1_CORE specific bits */ +#define OMAP3430_ST_ICR (1 << 29) +#define OMAP3430_ST_AES2 (1 << 28) +#define OMAP3430_ST_SHA12 (1 << 27) +#define OMAP3430_ST_DES2 (1 << 26) +#define OMAP3430_ST_MSPRO (1 << 23) +#define OMAP3430_ST_HDQ (1 << 22) +#define OMAP3430ES1_ST_FAC (1 << 8) +#define OMAP3430ES1_ST_MAILBOXES (1 << 7) +#define OMAP3430_ST_OMAPCTRL (1 << 6) +#define OMAP3430_ST_SDMA (1 << 2) +#define OMAP3430_ST_SDRC (1 << 1) +#define OMAP3430_ST_SSI (1 << 0) + +/* CM_IDLEST2_CORE */ +#define OMAP3430_ST_PKA (1 << 4) +#define OMAP3430_ST_AES1 (1 << 3) +#define OMAP3430_ST_RNG (1 << 2) +#define OMAP3430_ST_SHA11 (1 << 1) +#define OMAP3430_ST_DES1 (1 << 0) + +/* CM_IDLEST3_CORE */ +#define OMAP3430ES2_ST_USBTLL_SHIFT 2 +#define OMAP3430ES2_ST_USBTLL_MASK (1 << 2) + +/* CM_AUTOIDLE1_CORE */ +#define OMAP3430_AUTO_AES2 (1 << 28) +#define OMAP3430_AUTO_AES2_SHIFT 28 +#define OMAP3430_AUTO_SHA12 (1 << 27) +#define OMAP3430_AUTO_SHA12_SHIFT 27 +#define OMAP3430_AUTO_DES2 (1 << 26) +#define OMAP3430_AUTO_DES2_SHIFT 26 +#define OMAP3430_AUTO_MMC2 (1 << 25) +#define OMAP3430_AUTO_MMC2_SHIFT 25 +#define OMAP3430_AUTO_MMC1 (1 << 24) +#define OMAP3430_AUTO_MMC1_SHIFT 24 +#define OMAP3430_AUTO_MSPRO (1 << 23) +#define OMAP3430_AUTO_MSPRO_SHIFT 23 +#define OMAP3430_AUTO_HDQ (1 << 22) +#define OMAP3430_AUTO_HDQ_SHIFT 22 +#define OMAP3430_AUTO_MCSPI4 (1 << 21) +#define OMAP3430_AUTO_MCSPI4_SHIFT 21 +#define OMAP3430_AUTO_MCSPI3 (1 << 20) +#define OMAP3430_AUTO_MCSPI3_SHIFT 20 +#define OMAP3430_AUTO_MCSPI2 (1 << 19) +#define OMAP3430_AUTO_MCSPI2_SHIFT 19 +#define OMAP3430_AUTO_MCSPI1 (1 << 18) +#define OMAP3430_AUTO_MCSPI1_SHIFT 18 +#define OMAP3430_AUTO_I2C3 (1 << 17) +#define OMAP3430_AUTO_I2C3_SHIFT 17 +#define OMAP3430_AUTO_I2C2 (1 << 16) +#define OMAP3430_AUTO_I2C2_SHIFT 16 +#define OMAP3430_AUTO_I2C1 (1 << 15) +#define OMAP3430_AUTO_I2C1_SHIFT 15 +#define OMAP3430_AUTO_UART2 (1 << 14) +#define OMAP3430_AUTO_UART2_SHIFT 14 +#define OMAP3430_AUTO_UART1 (1 << 13) +#define OMAP3430_AUTO_UART1_SHIFT 13 +#define OMAP3430_AUTO_GPT11 (1 << 12) +#define OMAP3430_AUTO_GPT11_SHIFT 12 +#define OMAP3430_AUTO_GPT10 (1 << 11) +#define OMAP3430_AUTO_GPT10_SHIFT 11 +#define OMAP3430_AUTO_MCBSP5 (1 << 10) +#define OMAP3430_AUTO_MCBSP5_SHIFT 10 +#define OMAP3430_AUTO_MCBSP1 (1 << 9) +#define OMAP3430_AUTO_MCBSP1_SHIFT 9 +#define OMAP3430ES1_AUTO_FAC (1 << 8) +#define OMAP3430ES1_AUTO_FAC_SHIFT 8 +#define OMAP3430_AUTO_MAILBOXES (1 << 7) +#define OMAP3430_AUTO_MAILBOXES_SHIFT 7 +#define OMAP3430_AUTO_OMAPCTRL (1 << 6) +#define OMAP3430_AUTO_OMAPCTRL_SHIFT 6 +#define OMAP3430ES1_AUTO_FSHOSTUSB (1 << 5) +#define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT 5 +#define OMAP3430_AUTO_HSOTGUSB (1 << 4) +#define OMAP3430_AUTO_HSOTGUSB_SHIFT 4 +#define OMAP3430ES1_AUTO_D2D (1 << 3) +#define OMAP3430ES1_AUTO_D2D_SHIFT 3 +#define OMAP3430_AUTO_SSI (1 << 0) +#define OMAP3430_AUTO_SSI_SHIFT 0 + +/* CM_AUTOIDLE2_CORE */ +#define OMAP3430_AUTO_PKA (1 << 4) +#define OMAP3430_AUTO_PKA_SHIFT 4 +#define OMAP3430_AUTO_AES1 (1 << 3) +#define OMAP3430_AUTO_AES1_SHIFT 3 +#define OMAP3430_AUTO_RNG (1 << 2) +#define OMAP3430_AUTO_RNG_SHIFT 2 +#define OMAP3430_AUTO_SHA11 (1 << 1) +#define OMAP3430_AUTO_SHA11_SHIFT 1 +#define OMAP3430_AUTO_DES1 (1 << 0) +#define OMAP3430_AUTO_DES1_SHIFT 0 + +/* CM_AUTOIDLE3_CORE */ +#define OMAP3430ES2_AUTO_USBTLL_SHIFT 2 +#define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2) + +/* CM_CLKSEL_CORE */ +#define OMAP3430_CLKSEL_SSI_SHIFT 8 +#define OMAP3430_CLKSEL_SSI_MASK (0xf << 8) +#define OMAP3430_CLKSEL_GPT11_MASK (1 << 7) +#define OMAP3430_CLKSEL_GPT11_SHIFT 7 +#define OMAP3430_CLKSEL_GPT10_MASK (1 << 6) +#define OMAP3430_CLKSEL_GPT10_SHIFT 6 +#define OMAP3430ES1_CLKSEL_FSHOSTUSB_SHIFT 4 +#define OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK (0x3 << 4) +#define OMAP3430_CLKSEL_L4_SHIFT 2 +#define OMAP3430_CLKSEL_L4_MASK (0x3 << 2) +#define OMAP3430_CLKSEL_L3_SHIFT 0 +#define OMAP3430_CLKSEL_L3_MASK (0x3 << 0) + +/* CM_CLKSTCTRL_CORE */ +#define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT 4 +#define OMAP3430ES1_CLKTRCTRL_D2D_MASK (0x3 << 4) +#define OMAP3430_CLKTRCTRL_L4_SHIFT 2 +#define OMAP3430_CLKTRCTRL_L4_MASK (0x3 << 2) +#define OMAP3430_CLKTRCTRL_L3_SHIFT 0 +#define OMAP3430_CLKTRCTRL_L3_MASK (0x3 << 0) + +/* CM_CLKSTST_CORE */ +#define OMAP3430ES1_CLKACTIVITY_D2D (1 << 2) +#define OMAP3430_CLKACTIVITY_L4 (1 << 1) +#define OMAP3430_CLKACTIVITY_L3 (1 << 0) + +/* CM_FCLKEN_GFX */ +#define OMAP3430ES1_EN_3D (1 << 2) +#define OMAP3430ES1_EN_3D_SHIFT 2 +#define OMAP3430ES1_EN_2D (1 << 1) +#define OMAP3430ES1_EN_2D_SHIFT 1 + +/* CM_ICLKEN_GFX specific bits */ + +/* CM_IDLEST_GFX specific bits */ + +/* CM_CLKSEL_GFX specific bits */ + +/* CM_SLEEPDEP_GFX specific bits */ + +/* CM_CLKSTCTRL_GFX */ +#define OMAP3430ES1_CLKTRCTRL_GFX_SHIFT 0 +#define OMAP3430ES1_CLKTRCTRL_GFX_MASK (0x3 << 0) + +/* CM_CLKSTST_GFX */ +#define OMAP3430ES1_CLKACTIVITY_GFX (1 << 0) + +/* CM_FCLKEN_SGX */ +#define OMAP3430ES2_EN_SGX_SHIFT 1 +#define OMAP3430ES2_EN_SGX_MASK (1 << 1) + +/* CM_CLKSEL_SGX */ +#define OMAP3430ES2_CLKSEL_SGX_SHIFT 0 +#define OMAP3430ES2_CLKSEL_SGX_MASK (0x7 << 0) + +/* CM_FCLKEN_WKUP specific bits */ +#define OMAP3430ES2_EN_USIMOCP_SHIFT 9 + +/* CM_ICLKEN_WKUP specific bits */ +#define OMAP3430_EN_WDT1 (1 << 4) +#define OMAP3430_EN_WDT1_SHIFT 4 +#define OMAP3430_EN_32KSYNC (1 << 2) +#define OMAP3430_EN_32KSYNC_SHIFT 2 + +/* CM_IDLEST_WKUP specific bits */ +#define OMAP3430_ST_WDT2 (1 << 5) +#define OMAP3430_ST_WDT1 (1 << 4) +#define OMAP3430_ST_32KSYNC (1 << 2) + +/* CM_AUTOIDLE_WKUP */ +#define OMAP3430_AUTO_WDT2 (1 << 5) +#define OMAP3430_AUTO_WDT2_SHIFT 5 +#define OMAP3430_AUTO_WDT1 (1 << 4) +#define OMAP3430_AUTO_WDT1_SHIFT 4 +#define OMAP3430_AUTO_GPIO1 (1 << 3) +#define OMAP3430_AUTO_GPIO1_SHIFT 3 +#define OMAP3430_AUTO_32KSYNC (1 << 2) +#define OMAP3430_AUTO_32KSYNC_SHIFT 2 +#define OMAP3430_AUTO_GPT12 (1 << 1) +#define OMAP3430_AUTO_GPT12_SHIFT 1 +#define OMAP3430_AUTO_GPT1 (1 << 0) +#define OMAP3430_AUTO_GPT1_SHIFT 0 + +/* CM_CLKSEL_WKUP */ +#define OMAP3430ES2_CLKSEL_USIMOCP_MASK (0xf << 3) +#define OMAP3430_CLKSEL_RM_SHIFT 1 +#define OMAP3430_CLKSEL_RM_MASK (0x3 << 1) +#define OMAP3430_CLKSEL_GPT1_SHIFT 0 +#define OMAP3430_CLKSEL_GPT1_MASK (1 << 0) + +/* CM_CLKEN_PLL */ +#define OMAP3430_PWRDN_EMU_PERIPH_SHIFT 31 +#define OMAP3430_PWRDN_CAM_SHIFT 30 +#define OMAP3430_PWRDN_DSS1_SHIFT 29 +#define OMAP3430_PWRDN_TV_SHIFT 28 +#define OMAP3430_PWRDN_96M_SHIFT 27 +#define OMAP3430_PERIPH_DPLL_RAMPTIME_SHIFT 24 +#define OMAP3430_PERIPH_DPLL_RAMPTIME_MASK (0x3 << 24) +#define OMAP3430_PERIPH_DPLL_FREQSEL_SHIFT 20 +#define OMAP3430_PERIPH_DPLL_FREQSEL_MASK (0xf << 20) +#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT 19 +#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_MASK (1 << 19) +#define OMAP3430_EN_PERIPH_DPLL_SHIFT 16 +#define OMAP3430_EN_PERIPH_DPLL_MASK (0x7 << 16) +#define OMAP3430_PWRDN_EMU_CORE_SHIFT 12 +#define OMAP3430_CORE_DPLL_RAMPTIME_SHIFT 8 +#define OMAP3430_CORE_DPLL_RAMPTIME_MASK (0x3 << 8) +#define OMAP3430_CORE_DPLL_FREQSEL_SHIFT 4 +#define OMAP3430_CORE_DPLL_FREQSEL_MASK (0xf << 4) +#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_MASK (1 << 3) +#define OMAP3430_EN_CORE_DPLL_SHIFT 0 +#define OMAP3430_EN_CORE_DPLL_MASK (0x7 << 0) + +/* CM_CLKEN2_PLL */ +#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT 10 +#define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK (0x3 << 8) +#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT 4 +#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK (0xf << 4) +#define OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT 0 +#define OMAP3430ES2_EN_PERIPH2_DPLL_MASK (0x7 << 0) + +/* CM_IDLEST_CKGEN */ +#define OMAP3430_ST_54M_CLK (1 << 5) +#define OMAP3430_ST_12M_CLK (1 << 4) +#define OMAP3430_ST_48M_CLK (1 << 3) +#define OMAP3430_ST_96M_CLK (1 << 2) +#define OMAP3430_ST_PERIPH_CLK (1 << 1) +#define OMAP3430_ST_CORE_CLK (1 << 0) + +/* CM_IDLEST2_CKGEN */ +#define OMAP3430ES2_ST_120M_CLK_SHIFT 1 +#define OMAP3430ES2_ST_120M_CLK_MASK (1 << 1) +#define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT 0 +#define OMAP3430ES2_ST_PERIPH2_CLK_MASK (1 << 0) + +/* CM_AUTOIDLE_PLL */ +#define OMAP3430_AUTO_PERIPH_DPLL_SHIFT 3 +#define OMAP3430_AUTO_PERIPH_DPLL_MASK (0x7 << 3) +#define OMAP3430_AUTO_CORE_DPLL_SHIFT 0 +#define OMAP3430_AUTO_CORE_DPLL_MASK (0x7 << 0) + +/* CM_CLKSEL1_PLL */ +/* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */ +#define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT 27 +#define OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK (0x1f << 27) +#define OMAP3430_CORE_DPLL_MULT_SHIFT 16 +#define OMAP3430_CORE_DPLL_MULT_MASK (0x7ff << 16) +#define OMAP3430_CORE_DPLL_DIV_SHIFT 8 +#define OMAP3430_CORE_DPLL_DIV_MASK (0x7f << 8) +#define OMAP3430_SOURCE_54M (1 << 5) +#define OMAP3430_SOURCE_48M (1 << 3) + +/* CM_CLKSEL2_PLL */ +#define OMAP3430_PERIPH_DPLL_MULT_SHIFT 8 +#define OMAP3430_PERIPH_DPLL_MULT_MASK (0x7ff << 8) +#define OMAP3430_PERIPH_DPLL_DIV_SHIFT 0 +#define OMAP3430_PERIPH_DPLL_DIV_MASK (0x7f << 0) + +/* CM_CLKSEL3_PLL */ +#define OMAP3430_DIV_96M_SHIFT 0 +#define OMAP3430_DIV_96M_MASK (0x1f << 0) + +/* CM_CLKSEL4_PLL */ +#define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT 8 +#define OMAP3430ES2_PERIPH2_DPLL_MULT_MASK (0x7ff << 8) +#define OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT 0 +#define OMAP3430ES2_PERIPH2_DPLL_DIV_MASK (0x7f << 0) + +/* CM_CLKSEL5_PLL */ +#define OMAP3430ES2_DIV_120M_SHIFT 0 +#define OMAP3430ES2_DIV_120M_MASK (0x1f << 0) + +/* CM_CLKOUT_CTRL */ +#define OMAP3430_CLKOUT2_EN_SHIFT 7 +#define OMAP3430_CLKOUT2_EN (1 << 7) +#define OMAP3430_CLKOUT2_DIV_SHIFT 3 +#define OMAP3430_CLKOUT2_DIV_MASK (0x7 << 3) +#define OMAP3430_CLKOUT2SOURCE_SHIFT 0 +#define OMAP3430_CLKOUT2SOURCE_MASK (0x3 << 0) + +/* CM_FCLKEN_DSS */ +#define OMAP3430_EN_TV (1 << 2) +#define OMAP3430_EN_TV_SHIFT 2 +#define OMAP3430_EN_DSS2 (1 << 1) +#define OMAP3430_EN_DSS2_SHIFT 1 +#define OMAP3430_EN_DSS1 (1 << 0) +#define OMAP3430_EN_DSS1_SHIFT 0 + +/* CM_ICLKEN_DSS */ +#define OMAP3430_CM_ICLKEN_DSS_EN_DSS (1 << 0) +#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT 0 + +/* CM_IDLEST_DSS */ +#define OMAP3430_ST_DSS (1 << 0) + +/* CM_AUTOIDLE_DSS */ +#define OMAP3430_AUTO_DSS (1 << 0) +#define OMAP3430_AUTO_DSS_SHIFT 0 + +/* CM_CLKSEL_DSS */ +#define OMAP3430_CLKSEL_TV_SHIFT 8 +#define OMAP3430_CLKSEL_TV_MASK (0x1f << 8) +#define OMAP3430_CLKSEL_DSS1_SHIFT 0 +#define OMAP3430_CLKSEL_DSS1_MASK (0x1f << 0) + +/* CM_SLEEPDEP_DSS specific bits */ + +/* CM_CLKSTCTRL_DSS */ +#define OMAP3430_CLKTRCTRL_DSS_SHIFT 0 +#define OMAP3430_CLKTRCTRL_DSS_MASK (0x3 << 0) + +/* CM_CLKSTST_DSS */ +#define OMAP3430_CLKACTIVITY_DSS (1 << 0) + +/* CM_FCLKEN_CAM specific bits */ + +/* CM_ICLKEN_CAM specific bits */ + +/* CM_IDLEST_CAM */ +#define OMAP3430_ST_CAM (1 << 0) + +/* CM_AUTOIDLE_CAM */ +#define OMAP3430_AUTO_CAM (1 << 0) +#define OMAP3430_AUTO_CAM_SHIFT 0 + +/* CM_CLKSEL_CAM */ +#define OMAP3430_CLKSEL_CAM_SHIFT 0 +#define OMAP3430_CLKSEL_CAM_MASK (0x1f << 0) + +/* CM_SLEEPDEP_CAM specific bits */ + +/* CM_CLKSTCTRL_CAM */ +#define OMAP3430_CLKTRCTRL_CAM_SHIFT 0 +#define OMAP3430_CLKTRCTRL_CAM_MASK (0x3 << 0) + +/* CM_CLKSTST_CAM */ +#define OMAP3430_CLKACTIVITY_CAM (1 << 0) + +/* CM_FCLKEN_PER specific bits */ + +/* CM_ICLKEN_PER specific bits */ + +/* CM_IDLEST_PER */ +#define OMAP3430_ST_WDT3 (1 << 12) +#define OMAP3430_ST_MCBSP4 (1 << 2) +#define OMAP3430_ST_MCBSP3 (1 << 1) +#define OMAP3430_ST_MCBSP2 (1 << 0) + +/* CM_AUTOIDLE_PER */ +#define OMAP3430_AUTO_GPIO6 (1 << 17) +#define OMAP3430_AUTO_GPIO6_SHIFT 17 +#define OMAP3430_AUTO_GPIO5 (1 << 16) +#define OMAP3430_AUTO_GPIO5_SHIFT 16 +#define OMAP3430_AUTO_GPIO4 (1 << 15) +#define OMAP3430_AUTO_GPIO4_SHIFT 15 +#define OMAP3430_AUTO_GPIO3 (1 << 14) +#define OMAP3430_AUTO_GPIO3_SHIFT 14 +#define OMAP3430_AUTO_GPIO2 (1 << 13) +#define OMAP3430_AUTO_GPIO2_SHIFT 13 +#define OMAP3430_AUTO_WDT3 (1 << 12) +#define OMAP3430_AUTO_WDT3_SHIFT 12 +#define OMAP3430_AUTO_UART3 (1 << 11) +#define OMAP3430_AUTO_UART3_SHIFT 11 +#define OMAP3430_AUTO_GPT9 (1 << 10) +#define OMAP3430_AUTO_GPT9_SHIFT 10 +#define OMAP3430_AUTO_GPT8 (1 << 9) +#define OMAP3430_AUTO_GPT8_SHIFT 9 +#define OMAP3430_AUTO_GPT7 (1 << 8) +#define OMAP3430_AUTO_GPT7_SHIFT 8 +#define OMAP3430_AUTO_GPT6 (1 << 7) +#define OMAP3430_AUTO_GPT6_SHIFT 7 +#define OMAP3430_AUTO_GPT5 (1 << 6) +#define OMAP3430_AUTO_GPT5_SHIFT 6 +#define OMAP3430_AUTO_GPT4 (1 << 5) +#define OMAP3430_AUTO_GPT4_SHIFT 5 +#define OMAP3430_AUTO_GPT3 (1 << 4) +#define OMAP3430_AUTO_GPT3_SHIFT 4 +#define OMAP3430_AUTO_GPT2 (1 << 3) +#define OMAP3430_AUTO_GPT2_SHIFT 3 +#define OMAP3430_AUTO_MCBSP4 (1 << 2) +#define OMAP3430_AUTO_MCBSP4_SHIFT 2 +#define OMAP3430_AUTO_MCBSP3 (1 << 1) +#define OMAP3430_AUTO_MCBSP3_SHIFT 1 +#define OMAP3430_AUTO_MCBSP2 (1 << 0) +#define OMAP3430_AUTO_MCBSP2_SHIFT 0 + +/* CM_CLKSEL_PER */ +#define OMAP3430_CLKSEL_GPT9_MASK (1 << 7) +#define OMAP3430_CLKSEL_GPT9_SHIFT 7 +#define OMAP3430_CLKSEL_GPT8_MASK (1 << 6) +#define OMAP3430_CLKSEL_GPT8_SHIFT 6 +#define OMAP3430_CLKSEL_GPT7_MASK (1 << 5) +#define OMAP3430_CLKSEL_GPT7_SHIFT 5 +#define OMAP3430_CLKSEL_GPT6_MASK (1 << 4) +#define OMAP3430_CLKSEL_GPT6_SHIFT 4 +#define OMAP3430_CLKSEL_GPT5_MASK (1 << 3) +#define OMAP3430_CLKSEL_GPT5_SHIFT 3 +#define OMAP3430_CLKSEL_GPT4_MASK (1 << 2) +#define OMAP3430_CLKSEL_GPT4_SHIFT 2 +#define OMAP3430_CLKSEL_GPT3_MASK (1 << 1) +#define OMAP3430_CLKSEL_GPT3_SHIFT 1 +#define OMAP3430_CLKSEL_GPT2_MASK (1 << 0) +#define OMAP3430_CLKSEL_GPT2_SHIFT 0 + +/* CM_SLEEPDEP_PER specific bits */ +#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2 (1 << 2) + +/* CM_CLKSTCTRL_PER */ +#define OMAP3430_CLKTRCTRL_PER_SHIFT 0 +#define OMAP3430_CLKTRCTRL_PER_MASK (0x3 << 0) + +/* CM_CLKSTST_PER */ +#define OMAP3430_CLKACTIVITY_PER (1 << 0) + +/* CM_CLKSEL1_EMU */ +#define OMAP3430_DIV_DPLL4_SHIFT 24 +#define OMAP3430_DIV_DPLL4_MASK (0x1f << 24) +#define OMAP3430_DIV_DPLL3_SHIFT 16 +#define OMAP3430_DIV_DPLL3_MASK (0x1f << 16) +#define OMAP3430_CLKSEL_TRACECLK_SHIFT 11 +#define OMAP3430_CLKSEL_TRACECLK_MASK (0x7 << 11) +#define OMAP3430_CLKSEL_PCLK_SHIFT 8 +#define OMAP3430_CLKSEL_PCLK_MASK (0x7 << 8) +#define OMAP3430_CLKSEL_PCLKX2_SHIFT 6 +#define OMAP3430_CLKSEL_PCLKX2_MASK (0x3 << 6) +#define OMAP3430_CLKSEL_ATCLK_SHIFT 4 +#define OMAP3430_CLKSEL_ATCLK_MASK (0x3 << 4) +#define OMAP3430_TRACE_MUX_CTRL_SHIFT 2 +#define OMAP3430_TRACE_MUX_CTRL_MASK (0x3 << 2) +#define OMAP3430_MUX_CTRL_SHIFT 0 +#define OMAP3430_MUX_CTRL_MASK (0x3 << 0) + +/* CM_CLKSTCTRL_EMU */ +#define OMAP3430_CLKTRCTRL_EMU_SHIFT 0 +#define OMAP3430_CLKTRCTRL_EMU_MASK (0x3 << 0) + +/* CM_CLKSTST_EMU */ +#define OMAP3430_CLKACTIVITY_EMU (1 << 0) + +/* CM_CLKSEL2_EMU specific bits */ +#define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT 8 +#define OMAP3430_CORE_DPLL_EMU_MULT_MASK (0x7ff << 8) +#define OMAP3430_CORE_DPLL_EMU_DIV_SHIFT 0 +#define OMAP3430_CORE_DPLL_EMU_DIV_MASK (0x7f << 0) + +/* CM_CLKSEL3_EMU specific bits */ +#define OMAP3430_PERIPH_DPLL_EMU_MULT_SHIFT 8 +#define OMAP3430_PERIPH_DPLL_EMU_MULT_MASK (0x7ff << 8) +#define OMAP3430_PERIPH_DPLL_EMU_DIV_SHIFT 0 +#define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK (0x7f << 0) + +/* CM_POLCTRL */ +#define OMAP3430_CLKOUT2_POL (1 << 0) + +/* CM_IDLEST_NEON */ +#define OMAP3430_ST_NEON (1 << 0) + +/* CM_CLKSTCTRL_NEON */ +#define OMAP3430_CLKTRCTRL_NEON_SHIFT 0 +#define OMAP3430_CLKTRCTRL_NEON_MASK (0x3 << 0) + +/* CM_FCLKEN_USBHOST */ +#define OMAP3430ES2_EN_USBHOST2_SHIFT 1 +#define OMAP3430ES2_EN_USBHOST2_MASK (1 << 1) +#define OMAP3430ES2_EN_USBHOST1_SHIFT 0 +#define OMAP3430ES2_EN_USBHOST1_MASK (1 << 0) + +/* CM_ICLKEN_USBHOST */ +#define OMAP3430ES2_EN_USBHOST_SHIFT 0 +#define OMAP3430ES2_EN_USBHOST_MASK (1 << 0) + +/* CM_IDLEST_USBHOST */ + +/* CM_AUTOIDLE_USBHOST */ +#define OMAP3430ES2_AUTO_USBHOST_SHIFT 0 +#define OMAP3430ES2_AUTO_USBHOST_MASK (1 << 0) + +/* CM_SLEEPDEP_USBHOST */ +#define OMAP3430ES2_EN_MPU_SHIFT 1 +#define OMAP3430ES2_EN_MPU_MASK (1 << 1) +#define OMAP3430ES2_EN_IVA2_SHIFT 2 +#define OMAP3430ES2_EN_IVA2_MASK (1 << 2) + +/* CM_CLKSTCTRL_USBHOST */ +#define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT 0 +#define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK (3 << 0) + + + +#endif diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h new file mode 100644 index 000000000000..8489f3029fed --- /dev/null +++ b/arch/arm/mach-omap2/cm.h @@ -0,0 +1,124 @@ +#ifndef __ARCH_ASM_MACH_OMAP2_CM_H +#define __ARCH_ASM_MACH_OMAP2_CM_H + +/* + * OMAP2/3 Clock Management (CM) register definitions + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "prcm-common.h" + +#ifndef __ASSEMBLER__ +#define OMAP_CM_REGADDR(module, reg) \ + (void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg)) +#else +#define OMAP2420_CM_REGADDR(module, reg) \ + IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) +#define OMAP2430_CM_REGADDR(module, reg) \ + IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) +#define OMAP34XX_CM_REGADDR(module, reg) \ + IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) +#endif + +/* + * Architecture-specific global CM registers + * Use cm_{read,write}_reg() with these registers. + * These registers appear once per CM module. + */ + +#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000) +#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) +#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) + +#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) + +/* + * Module specific CM registers from CM_BASE + domain offset + * Use cm_{read,write}_mod_reg() with these registers. + * These register offsets generally appear in more than one PRCM submodule. + */ + +/* Common between 24xx and 34xx */ + +#define CM_FCLKEN 0x0000 +#define CM_FCLKEN1 CM_FCLKEN +#define CM_CLKEN CM_FCLKEN +#define CM_ICLKEN 0x0010 +#define CM_ICLKEN1 CM_ICLKEN +#define CM_ICLKEN2 0x0014 +#define CM_ICLKEN3 0x0018 +#define CM_IDLEST 0x0020 +#define CM_IDLEST1 CM_IDLEST +#define CM_IDLEST2 0x0024 +#define CM_AUTOIDLE 0x0030 +#define CM_AUTOIDLE1 CM_AUTOIDLE +#define CM_AUTOIDLE2 0x0034 +#define CM_AUTOIDLE3 0x0038 +#define CM_CLKSEL 0x0040 +#define CM_CLKSEL1 CM_CLKSEL +#define CM_CLKSEL2 0x0044 +#define CM_CLKSTCTRL 0x0048 + + +/* Architecture-specific registers */ + +#define OMAP24XX_CM_FCLKEN2 0x0004 +#define OMAP24XX_CM_ICLKEN4 0x001c +#define OMAP24XX_CM_AUTOIDLE4 0x003c + +#define OMAP2430_CM_IDLEST3 0x0028 + +#define OMAP3430_CM_CLKEN_PLL 0x0004 +#define OMAP3430ES2_CM_CLKEN2 0x0004 +#define OMAP3430ES2_CM_FCLKEN3 0x0008 +#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2 +#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2 +#define OMAP3430_CM_CLKSEL1 CM_CLKSEL +#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL +#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2 +#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2 +#define OMAP3430_CM_CLKSEL3 CM_CLKSTCTRL +#define OMAP3430_CM_CLKSTST 0x004c +#define OMAP3430ES2_CM_CLKSEL4 0x004c +#define OMAP3430ES2_CM_CLKSEL5 0x0050 +#define OMAP3430_CM_CLKSEL2_EMU 0x0050 +#define OMAP3430_CM_CLKSEL3_EMU 0x0054 + + +/* Clock management domain register get/set */ + +#ifndef __ASSEMBLER__ +static inline void cm_write_mod_reg(u32 val, s16 module, s16 idx) +{ + __raw_writel(val, OMAP_CM_REGADDR(module, idx)); +} + +static inline u32 cm_read_mod_reg(s16 module, s16 idx) +{ + return __raw_readl(OMAP_CM_REGADDR(module, idx)); +} +#endif + +/* CM register bits shared between 24XX and 3430 */ + +/* CM_CLKSEL_GFX */ +#define OMAP_CLKSEL_GFX_SHIFT 0 +#define OMAP_CLKSEL_GFX_MASK (0x7 << 0) + +/* CM_ICLKEN_GFX */ +#define OMAP_EN_GFX_SHIFT 0 +#define OMAP_EN_GFX (1 << 0) + +/* CM_IDLEST_GFX */ +#define OMAP_ST_GFX (1 << 0) + + +#endif diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c new file mode 100644 index 000000000000..a5d86a49c213 --- /dev/null +++ b/arch/arm/mach-omap2/control.c @@ -0,0 +1,74 @@ +/* + * OMAP2/3 System Control Module register access + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG + +#include <linux/kernel.h> + +#include <asm/io.h> + +#include <asm/arch/control.h> + +static u32 omap2_ctrl_base; + +#define OMAP_CTRL_REGADDR(reg) (void __iomem *)IO_ADDRESS(omap2_ctrl_base \ + + (reg)) + +void omap_ctrl_base_set(u32 base) +{ + omap2_ctrl_base = base; +} + +u32 omap_ctrl_base_get(void) +{ + return omap2_ctrl_base; +} + +u8 omap_ctrl_readb(u16 offset) +{ + return __raw_readb(OMAP_CTRL_REGADDR(offset)); +} + +u16 omap_ctrl_readw(u16 offset) +{ + return __raw_readw(OMAP_CTRL_REGADDR(offset)); +} + +u32 omap_ctrl_readl(u16 offset) +{ + return __raw_readl(OMAP_CTRL_REGADDR(offset)); +} + +void omap_ctrl_writeb(u8 val, u16 offset) +{ + pr_debug("omap_ctrl_writeb: writing 0x%0x to 0x%0x\n", val, + (u32)OMAP_CTRL_REGADDR(offset)); + + __raw_writeb(val, OMAP_CTRL_REGADDR(offset)); +} + +void omap_ctrl_writew(u16 val, u16 offset) +{ + pr_debug("omap_ctrl_writew: writing 0x%0x to 0x%0x\n", val, + (u32)OMAP_CTRL_REGADDR(offset)); + + __raw_writew(val, OMAP_CTRL_REGADDR(offset)); +} + +void omap_ctrl_writel(u32 val, u16 offset) +{ + pr_debug("omap_ctrl_writel: writing 0x%0x to 0x%0x\n", val, + (u32)OMAP_CTRL_REGADDR(offset)); + + __raw_writel(val, OMAP_CTRL_REGADDR(offset)); +} + diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5a4cc2076a7d..02cede295e89 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -69,7 +69,7 @@ static void __iomem *gpmc_base = static void __iomem *gpmc_cs_base = (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0; -static struct clk *gpmc_l3_clk; +static struct clk *gpmc_fck; static void gpmc_write_reg(int idx, u32 val) { @@ -94,11 +94,10 @@ u32 gpmc_cs_read_reg(int cs, int idx) return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx); } -/* TODO: Add support for gpmc_fck to clock framework and use it */ unsigned long gpmc_get_fclk_period(void) { /* In picoseconds */ - return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000); + return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000); } unsigned int gpmc_ns_to_ticks(unsigned int time_ns) @@ -398,8 +397,11 @@ void __init gpmc_init(void) { u32 l; - gpmc_l3_clk = clk_get(NULL, "core_l3_ck"); - BUG_ON(IS_ERR(gpmc_l3_clk)); + gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ + if (IS_ERR(gpmc_fck)) + WARN_ON(1); + else + clk_enable(gpmc_fck); l = gpmc_read_reg(GPMC_REVISION); printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index b03cd06e055b..4799561c5a9e 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -70,6 +70,9 @@ struct omap_mbox2_priv { static struct clk *mbox_ick_handle; +static void omap2_mbox_enable_irq(struct omap_mbox *mbox, + omap_mbox_type_t irq); + static inline unsigned int mbox_read_reg(unsigned int reg) { return __raw_readl(mbox_base + reg); @@ -81,7 +84,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg) } /* Mailbox H/W preparations */ -static inline int omap2_mbox_startup(struct omap_mbox *mbox) +static int omap2_mbox_startup(struct omap_mbox *mbox) { unsigned int l; @@ -97,38 +100,40 @@ static inline int omap2_mbox_startup(struct omap_mbox *mbox) l |= 0x00000011; mbox_write_reg(l, MAILBOX_SYSCONFIG); + omap2_mbox_enable_irq(mbox, IRQ_RX); + return 0; } -static inline void omap2_mbox_shutdown(struct omap_mbox *mbox) +static void omap2_mbox_shutdown(struct omap_mbox *mbox) { clk_disable(mbox_ick_handle); clk_put(mbox_ick_handle); } /* Mailbox FIFO handle functions */ -static inline mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox) +static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox) { struct omap_mbox2_fifo *fifo = &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; return (mbox_msg_t) mbox_read_reg(fifo->msg); } -static inline void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) +static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) { struct omap_mbox2_fifo *fifo = &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; mbox_write_reg(msg, fifo->msg); } -static inline int omap2_mbox_fifo_empty(struct omap_mbox *mbox) +static int omap2_mbox_fifo_empty(struct omap_mbox *mbox) { struct omap_mbox2_fifo *fifo = &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; return (mbox_read_reg(fifo->msg_stat) == 0); } -static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox) +static int omap2_mbox_fifo_full(struct omap_mbox *mbox) { struct omap_mbox2_fifo *fifo = &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; @@ -136,7 +141,7 @@ static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox) } /* Mailbox IRQ handle functions */ -static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox, +static void omap2_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv; @@ -147,7 +152,7 @@ static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox, mbox_write_reg(l, p->irqenable); } -static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox, +static void omap2_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv; @@ -158,7 +163,7 @@ static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox, mbox_write_reg(l, p->irqenable); } -static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox, +static void omap2_mbox_ack_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv; @@ -167,7 +172,7 @@ static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox, mbox_write_reg(bit, p->irqstatus); } -static inline int omap2_mbox_is_irq(struct omap_mbox *mbox, +static int omap2_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv; diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c index 3e5d8cd4ea4f..12479081881a 100644 --- a/arch/arm/mach-omap2/memory.c +++ b/arch/arm/mach-omap2/memory.c @@ -27,11 +27,16 @@ #include <asm/arch/clock.h> #include <asm/arch/sram.h> -#include "prcm-regs.h" +#include "prm.h" + #include "memory.h" +#include "sdrc.h" +unsigned long omap2_sdrc_base; +unsigned long omap2_sms_base; static struct memory_timings mem_timings; +static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2; u32 omap2_memory_get_slow_dll_ctrl(void) { @@ -48,12 +53,60 @@ u32 omap2_memory_get_type(void) return mem_timings.m_type; } +/* + * Check the DLL lock state, and return tue if running in unlock mode. + * This is needed to compensate for the shifted DLL value in unlock mode. + */ +u32 omap2_dll_force_needed(void) +{ + /* dlla and dllb are a set */ + u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL); + + if ((dll_state & (1 << 2)) == (1 << 2)) + return 1; + else + return 0; +} + +/* + * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC. + * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or + * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2) + */ +u32 omap2_reprogram_sdrc(u32 level, u32 force) +{ + u32 dll_ctrl, m_type; + u32 prev = curr_perf_level; + unsigned long flags; + + if ((curr_perf_level == level) && !force) + return prev; + + if (level == CORE_CLK_SRC_DPLL) { + dll_ctrl = omap2_memory_get_slow_dll_ctrl(); + } else if (level == CORE_CLK_SRC_DPLL_X2) { + dll_ctrl = omap2_memory_get_fast_dll_ctrl(); + } else { + return prev; + } + + m_type = omap2_memory_get_type(); + + local_irq_save(flags); + __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP); + omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type); + curr_perf_level = level; + local_irq_restore(flags); + + return prev; +} + void omap2_init_memory_params(u32 force_lock_to_unlock_mode) { unsigned long dll_cnt; u32 fast_dll = 0; - mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ + mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. * In the case of 2422, its ok to use CS1 instead of CS0. @@ -73,11 +126,11 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode) mem_timings.dll_mode = M_LOCK; if (mem_timings.base_cs == 0) { - fast_dll = SDRC_DLLA_CTRL; - dll_cnt = SDRC_DLLA_STATUS & 0xff00; + fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL); + dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00; } else { - fast_dll = SDRC_DLLB_CTRL; - dll_cnt = SDRC_DLLB_STATUS & 0xff00; + fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL); + dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00; } if (force_lock_to_unlock_mode) { fast_dll &= ~0xff00; @@ -106,14 +159,13 @@ void __init omap2_init_memory(void) { u32 l; - l = SMS_SYSCONFIG; + l = sms_read_reg(SMS_SYSCONFIG); l &= ~(0x3 << 3); l |= (0x2 << 3); - SMS_SYSCONFIG = l; + sms_write_reg(l, SMS_SYSCONFIG); - l = SDRC_SYSCONFIG; + l = sdrc_read_reg(SDRC_SYSCONFIG); l &= ~(0x3 << 3); l |= (0x2 << 3); - SDRC_SYSCONFIG = l; - + sdrc_write_reg(l, SDRC_SYSCONFIG); } diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h index d212eea83a05..9a280b50a893 100644 --- a/arch/arm/mach-omap2/memory.h +++ b/arch/arm/mach-omap2/memory.h @@ -32,3 +32,5 @@ extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode); extern u32 omap2_memory_get_slow_dll_ctrl(void); extern u32 omap2_memory_get_fast_dll_ctrl(void); extern u32 omap2_memory_get_type(void); +u32 omap2_dll_force_needed(void); +u32 omap2_reprogram_sdrc(u32 level, u32 force); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 05750975d746..930770012a75 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -1,11 +1,12 @@ /* * linux/arch/arm/mach-omap2/mux.c * - * OMAP1 pin multiplexing configurations + * OMAP2 pin multiplexing configurations * - * Copyright (C) 2003 - 2005 Nokia Corporation + * Copyright (C) 2004 - 2008 Texas Instruments Inc. + * Copyright (C) 2003 - 2008 Nokia Corporation * - * Written by Tony Lindgren <tony.lindgren@nokia.com> + * Written by Tony Lindgren * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,13 +29,17 @@ #include <asm/io.h> #include <linux/spinlock.h> +#include <asm/arch/control.h> #include <asm/arch/mux.h> #ifdef CONFIG_OMAP_MUX +static struct omap_mux_cfg arch_mux_cfg; + /* NOTE: See mux.h for the enumeration */ -struct pin_config __initdata_or_module omap24xx_pins[] = { +#ifdef CONFIG_ARCH_OMAP24XX +static struct pin_config __initdata_or_module omap24xx_pins[] = { /* * description mux mux pull pull debug * offset mode ena type @@ -77,7 +82,12 @@ MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1) MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1) MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1) +MUX_CFG_24XX("N15_24XX_GPIO85", 0x103, 3, 0, 0, 1) MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) +MUX_CFG_24XX("P20_24XX_GPIO93", 0x10b, 3, 0, 0, 1) +MUX_CFG_24XX("P18_24XX_GPIO95", 0x10d, 3, 0, 0, 1) +MUX_CFG_24XX("M18_24XX_GPIO96", 0x10e, 3, 0, 0, 1) +MUX_CFG_24XX("L14_24XX_GPIO97", 0x10f, 3, 0, 0, 1) MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1) MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1) MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1) @@ -102,9 +112,6 @@ MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1) MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1) MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1) -/* TSC IRQ */ -MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1) - /* UART3 */ MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1) MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1) @@ -167,12 +174,108 @@ MUX_CFG_24XX("B3__24XX_KBR5", 0x30, 3, 1, 1, 1) MUX_CFG_24XX("AA4_24XX_KBC2", 0xe7, 3, 0, 0, 1) MUX_CFG_24XX("B13_24XX_KBC6", 0x110, 3, 0, 0, 1) +/* 2430 USB */ +MUX_CFG_24XX("AD9_2430_USB0_PUEN", 0x133, 4, 0, 0, 1) +MUX_CFG_24XX("Y11_2430_USB0_VP", 0x134, 4, 0, 0, 1) +MUX_CFG_24XX("AD7_2430_USB0_VM", 0x135, 4, 0, 0, 1) +MUX_CFG_24XX("AE7_2430_USB0_RCV", 0x136, 4, 0, 0, 1) +MUX_CFG_24XX("AD4_2430_USB0_TXEN", 0x137, 4, 0, 0, 1) +MUX_CFG_24XX("AF9_2430_USB0_SE0", 0x138, 4, 0, 0, 1) +MUX_CFG_24XX("AE6_2430_USB0_DAT", 0x139, 4, 0, 0, 1) +MUX_CFG_24XX("AD24_2430_USB1_SE0", 0x107, 2, 0, 0, 1) +MUX_CFG_24XX("AB24_2430_USB1_RCV", 0x108, 2, 0, 0, 1) +MUX_CFG_24XX("Y25_2430_USB1_TXEN", 0x109, 2, 0, 0, 1) +MUX_CFG_24XX("AA26_2430_USB1_DAT", 0x10A, 2, 0, 0, 1) + +/* 2430 HS-USB */ +MUX_CFG_24XX("AD9_2430_USB0HS_DATA3", 0x133, 0, 0, 0, 1) +MUX_CFG_24XX("Y11_2430_USB0HS_DATA4", 0x134, 0, 0, 0, 1) +MUX_CFG_24XX("AD7_2430_USB0HS_DATA5", 0x135, 0, 0, 0, 1) +MUX_CFG_24XX("AE7_2430_USB0HS_DATA6", 0x136, 0, 0, 0, 1) +MUX_CFG_24XX("AD4_2430_USB0HS_DATA2", 0x137, 0, 0, 0, 1) +MUX_CFG_24XX("AF9_2430_USB0HS_DATA0", 0x138, 0, 0, 0, 1) +MUX_CFG_24XX("AE6_2430_USB0HS_DATA1", 0x139, 0, 0, 0, 1) +MUX_CFG_24XX("AE8_2430_USB0HS_CLK", 0x13A, 0, 0, 0, 1) +MUX_CFG_24XX("AD8_2430_USB0HS_DIR", 0x13B, 0, 0, 0, 1) +MUX_CFG_24XX("AE5_2430_USB0HS_STP", 0x13c, 0, 1, 1, 1) +MUX_CFG_24XX("AE9_2430_USB0HS_NXT", 0x13D, 0, 0, 0, 1) +MUX_CFG_24XX("AC7_2430_USB0HS_DATA7", 0x13E, 0, 0, 0, 1) + +/* 2430 McBSP */ +MUX_CFG_24XX("AC10_2430_MCBSP2_FSX", 0x012E, 1, 0, 0, 1) +MUX_CFG_24XX("AD16_2430_MCBSP2_CLX", 0x012F, 1, 0, 0, 1) +MUX_CFG_24XX("AE13_2430_MCBSP2_DX", 0x0130, 1, 0, 0, 1) +MUX_CFG_24XX("AD13_2430_MCBSP2_DR", 0x0131, 1, 0, 0, 1) +MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E, 0, 0, 0, 1) +MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F, 0, 0, 0, 1) +MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF", 0x0130, 0, 0, 0, 1) +MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1) }; -int __init omap2_mux_init(void) +#define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins) + +#else +#define omap24xx_pins NULL +#define OMAP24XX_PINS_SZ 0 +#endif /* CONFIG_ARCH_OMAP24XX */ + +#define OMAP24XX_PULL_ENA (1 << 3) +#define OMAP24XX_PULL_UP (1 << 4) + +#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) +void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg) { - omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins)); + u16 orig; + u8 warn = 0, debug = 0; + + orig = omap_ctrl_readb(cfg->mux_reg); + +#ifdef CONFIG_OMAP_MUX_DEBUG + debug = cfg->debug; +#endif + warn = (orig != reg); + if (debug || warn) + printk(KERN_WARNING + "MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n", + cfg->name, omap_ctrl_base_get() + cfg->mux_reg, + orig, reg); +} +#else +#define omap2_cfg_debug(x, y) do {} while (0) +#endif + +#ifdef CONFIG_ARCH_OMAP24XX +int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) +{ + static DEFINE_SPINLOCK(mux_spin_lock); + unsigned long flags; + u8 reg = 0; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg |= cfg->mask & 0x7; + if (cfg->pull_val) + reg |= OMAP24XX_PULL_ENA; + if (cfg->pu_pd_val) + reg |= OMAP24XX_PULL_UP; + omap2_cfg_debug(cfg, reg); + omap_ctrl_writeb(reg, cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + return 0; } +#else +#define omap24xx_cfg_reg 0 +#endif + +int __init omap2_mux_init(void) +{ + if (cpu_is_omap24xx()) { + arch_mux_cfg.pins = omap24xx_pins; + arch_mux_cfg.size = OMAP24XX_PINS_SZ; + arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; + } + + return omap_mux_register(&arch_mux_cfg); +} #endif diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c deleted file mode 100644 index 2494091a078b..000000000000 --- a/arch/arm/mach-omap2/pm-domain.c +++ /dev/null @@ -1,299 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/pm-domain.c - * - * Power domain functions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * Tony Lindgren <tony@atomide.com> - * - * Some code based on earlier OMAP2 sample PM code - * Copyright (C) 2005 Texas Instruments, Inc. - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/clk.h> - -#include <asm/io.h> - -#include "prcm-regs.h" - -/* Power domain offsets */ -#define PM_MPU_OFFSET 0x100 -#define PM_CORE_OFFSET 0x200 -#define PM_GFX_OFFSET 0x300 -#define PM_WKUP_OFFSET 0x400 /* Autoidle only */ -#define PM_PLL_OFFSET 0x500 /* Autoidle only */ -#define PM_DSP_OFFSET 0x800 -#define PM_MDM_OFFSET 0xc00 - -/* Power domain wake-up dependency control register */ -#define PM_WKDEP_OFFSET 0xc8 -#define EN_MDM (1 << 5) -#define EN_WKUP (1 << 4) -#define EN_GFX (1 << 3) -#define EN_DSP (1 << 2) -#define EN_MPU (1 << 1) -#define EN_CORE (1 << 0) - -/* Core power domain state transition control register */ -#define PM_PWSTCTRL_OFFSET 0xe0 -#define FORCESTATE (1 << 18) /* Only for DSP & GFX */ -#define MEM4RETSTATE (1 << 6) -#define MEM3RETSTATE (1 << 5) -#define MEM2RETSTATE (1 << 4) -#define MEM1RETSTATE (1 << 3) -#define LOGICRETSTATE (1 << 2) /* Logic is retained */ -#define POWERSTATE_OFF 0x3 -#define POWERSTATE_RETENTION 0x1 -#define POWERSTATE_ON 0x0 - -/* Power domain state register */ -#define PM_PWSTST_OFFSET 0xe4 - -/* Hardware supervised state transition control register */ -#define CM_CLKSTCTRL_OFFSET 0x48 -#define AUTOSTAT_MPU (1 << 0) /* MPU */ -#define AUTOSTAT_DSS (1 << 2) /* Core */ -#define AUTOSTAT_L4 (1 << 1) /* Core */ -#define AUTOSTAT_L3 (1 << 0) /* Core */ -#define AUTOSTAT_GFX (1 << 0) /* GFX */ -#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */ -#define AUTOSTAT_DSP (1 << 0) /* DSP */ -#define AUTOSTAT_MDM (1 << 0) /* MDM */ - -/* Automatic control of interface clock idling */ -#define CM_AUTOIDLE1_OFFSET 0x30 -#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */ -#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */ -#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */ -#define AUTO_54M(x) (((x) & 0x3) << 6) -#define AUTO_96M(x) (((x) & 0x3) << 2) -#define AUTO_DPLL(x) (((x) & 0x3) << 0) -#define AUTO_STOPPED 0x3 -#define AUTO_BYPASS_FAST 0x2 /* DPLL only */ -#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */ -#define AUTO_DISABLED 0x0 - -/* Voltage control PRCM_VOLTCTRL bits */ -#define AUTO_EXTVOLT (1 << 15) -#define FORCE_EXTVOLT (1 << 14) -#define SETOFF_LEVEL(x) (((x) & 0x3) << 12) -#define MEMRETCTRL (1 << 8) -#define SETRET_LEVEL(x) (((x) & 0x3) << 6) -#define VOLT_LEVEL(x) (((x) & 0x3) << 0) - -#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE) -#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r)) -#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r)) - -static u32 pmdomain_get_wakeup_dependencies(int domain_offset) -{ - return prcm_readl(domain_offset + PM_WKDEP_OFFSET); -} - -static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset) -{ - prcm_writel(state, domain_offset + PM_WKDEP_OFFSET); -} - -static u32 pmdomain_get_powerstate(int domain_offset) -{ - return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET); -} - -static void pmdomain_set_powerstate(u32 state, int domain_offset) -{ - prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET); -} - -static u32 pmdomain_get_clock_autocontrol(int domain_offset) -{ - return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET); -} - -static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset) -{ - prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET); -} - -static u32 pmdomain_get_clock_autoidle1(int domain_offset) -{ - return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET); -} - -/* Core domain only */ -static u32 pmdomain_get_clock_autoidle2(int domain_offset) -{ - return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET); -} - -/* Core domain only */ -static u32 pmdomain_get_clock_autoidle3(int domain_offset) -{ - return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET); -} - -/* Core domain only */ -static u32 pmdomain_get_clock_autoidle4(int domain_offset) -{ - return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET); -} - -static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset) -{ - prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset); -} - -/* Core domain only */ -static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset) -{ - prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset); -} - -/* Core domain only */ -static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset) -{ - prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset); -} - -/* Core domain only */ -static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset) -{ - prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset); -} - -/* - * Configures power management domains to idle clocks automatically. - */ -void pmdomain_set_autoidle(void) -{ - u32 val; - - /* Set PLL auto stop for 54M, 96M & DPLL */ - pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) | - AUTO_96M(AUTO_STOPPED) | - AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET); - - /* External clock input control - * REVISIT: Should this be in clock framework? - */ - PRCM_CLKSRC_CTRL |= (0x3 << 3); - - /* Configure number of 32KHz clock cycles for sys_clk */ - PRCM_CLKSSETUP = 0x00ff; - - /* Configure automatic voltage transition */ - PRCM_VOLTSETUP = 0; - val = PRCM_VOLTCTRL; - val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3)); - val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT; - PRCM_VOLTCTRL = val; - - /* Disable emulation tools functional clock */ - PRCM_CLKEMUL_CTRL = 0x0; - - /* Set core memory retention state */ - val = pmdomain_get_powerstate(PM_CORE_OFFSET); - if (cpu_is_omap2420()) { - val &= ~(0x7 << 3); - val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE); - } else { - val &= ~(0xf << 3); - val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE | - MEM1RETSTATE); - } - pmdomain_set_powerstate(val, PM_CORE_OFFSET); - - /* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */ - val = SMS_SYSCONFIG; - val &= ~(0x3 << 3); - val |= (0x2 << 3) | (1 << 0); - SMS_SYSCONFIG |= val; - - val = SDRC_SYSCONFIG; - val &= ~(0x3 << 3); - val |= (0x2 << 3); - SDRC_SYSCONFIG = val; - - /* Configure L3 interface for smart idle. - * REVISIT: Enable autoidle bit0 ? - */ - val = GPMC_SYSCONFIG; - val &= ~(0x3 << 3); - val |= (0x2 << 3) | (1 << 0); - GPMC_SYSCONFIG = val; - - pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION, - PM_MPU_OFFSET); - pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET); - if (!cpu_is_omap2420()) - pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET); - - /* Assume suspend function has saved the state for DSP and GFX */ - pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET); - pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET); - -#if 0 - /* REVISIT: Internal USB needs special handling */ - force_standby_usb(); - if (cpu_is_omap2430()) - force_hsmmc(); - sdram_self_refresh_on_idle_req(1); -#endif - - /* Enable clock auto control for all domains. - * Note that CORE domain includes also DSS, L4 & L3. - */ - pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET); - pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET); - pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3, - PM_CORE_OFFSET); - if (cpu_is_omap2420()) - pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP, - PM_DSP_OFFSET); - else { - pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET); - pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET); - } - - /* Enable clock autoidle for all domains */ - pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET); - if (cpu_is_omap2420()) { - pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET); - } else { - pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET); - pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET); - } - pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET); -} - -/* - * Initializes power domains by removing wake-up dependencies and powering - * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code - * must re-enable DSP and GFX when used. - */ -void __init pmdomain_init(void) -{ - /* Remove all domain wakeup dependencies */ - pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET); - pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET); - pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET); - pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET); - if (cpu_is_omap2430()) - pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET); - - /* Power down DSP and GFX */ - pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET); - pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET); -} diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index baf7d82b458b..aad781dcf1b1 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -23,6 +23,7 @@ #include <linux/sysfs.h> #include <linux/module.h> #include <linux/delay.h> +#include <linux/clk.h> #include <asm/io.h> #include <asm/irq.h> @@ -36,8 +37,6 @@ #include <asm/arch/sram.h> #include <asm/arch/pm.h> -#include "prcm-regs.h" - static struct clk *vclk; static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev); @@ -78,251 +77,8 @@ static int omap2_pm_prepare(void) return 0; } -#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \ - OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \ - OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3)) - -#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4)) - -#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \ - OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \ - OMAP_IRQ_BIT(INT_24XX_UART3_IRQ)) - -#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, ®, reg); - -static void omap2_pm_debug(char * desc) -{ - printk("%s:\n", desc); - - preg(CM_CLKSTCTRL_MPU); - preg(CM_CLKSTCTRL_CORE); - preg(CM_CLKSTCTRL_GFX); - preg(CM_CLKSTCTRL_DSP); - preg(CM_CLKSTCTRL_MDM); - - preg(PM_PWSTCTRL_MPU); - preg(PM_PWSTCTRL_CORE); - preg(PM_PWSTCTRL_GFX); - preg(PM_PWSTCTRL_DSP); - preg(PM_PWSTCTRL_MDM); - - preg(PM_PWSTST_MPU); - preg(PM_PWSTST_CORE); - preg(PM_PWSTST_GFX); - preg(PM_PWSTST_DSP); - preg(PM_PWSTST_MDM); - - preg(CM_AUTOIDLE1_CORE); - preg(CM_AUTOIDLE2_CORE); - preg(CM_AUTOIDLE3_CORE); - preg(CM_AUTOIDLE4_CORE); - preg(CM_AUTOIDLE_WKUP); - preg(CM_AUTOIDLE_PLL); - preg(CM_AUTOIDLE_DSP); - preg(CM_AUTOIDLE_MDM); - - preg(CM_ICLKEN1_CORE); - preg(CM_ICLKEN2_CORE); - preg(CM_ICLKEN3_CORE); - preg(CM_ICLKEN4_CORE); - preg(CM_ICLKEN_GFX); - preg(CM_ICLKEN_WKUP); - preg(CM_ICLKEN_DSP); - preg(CM_ICLKEN_MDM); - - preg(CM_IDLEST1_CORE); - preg(CM_IDLEST2_CORE); - preg(CM_IDLEST3_CORE); - preg(CM_IDLEST4_CORE); - preg(CM_IDLEST_GFX); - preg(CM_IDLEST_WKUP); - preg(CM_IDLEST_CKGEN); - preg(CM_IDLEST_DSP); - preg(CM_IDLEST_MDM); - - preg(RM_RSTST_MPU); - preg(RM_RSTST_GFX); - preg(RM_RSTST_WKUP); - preg(RM_RSTST_DSP); - preg(RM_RSTST_MDM); - - preg(PM_WKDEP_MPU); - preg(PM_WKDEP_CORE); - preg(PM_WKDEP_GFX); - preg(PM_WKDEP_DSP); - preg(PM_WKDEP_MDM); - - preg(CM_FCLKEN_WKUP); - preg(CM_ICLKEN_WKUP); - preg(CM_IDLEST_WKUP); - preg(CM_AUTOIDLE_WKUP); - preg(CM_CLKSEL_WKUP); - - preg(PM_WKEN_WKUP); - preg(PM_WKST_WKUP); -} - -static inline void omap2_pm_save_registers(void) -{ - /* Save interrupt registers */ - OMAP24XX_SAVE(INTC_MIR0); - OMAP24XX_SAVE(INTC_MIR1); - OMAP24XX_SAVE(INTC_MIR2); - - /* Save power control registers */ - OMAP24XX_SAVE(CM_CLKSTCTRL_MPU); - OMAP24XX_SAVE(CM_CLKSTCTRL_CORE); - OMAP24XX_SAVE(CM_CLKSTCTRL_GFX); - OMAP24XX_SAVE(CM_CLKSTCTRL_DSP); - OMAP24XX_SAVE(CM_CLKSTCTRL_MDM); - - /* Save power state registers */ - OMAP24XX_SAVE(PM_PWSTCTRL_MPU); - OMAP24XX_SAVE(PM_PWSTCTRL_CORE); - OMAP24XX_SAVE(PM_PWSTCTRL_GFX); - OMAP24XX_SAVE(PM_PWSTCTRL_DSP); - OMAP24XX_SAVE(PM_PWSTCTRL_MDM); - - /* Save autoidle registers */ - OMAP24XX_SAVE(CM_AUTOIDLE1_CORE); - OMAP24XX_SAVE(CM_AUTOIDLE2_CORE); - OMAP24XX_SAVE(CM_AUTOIDLE3_CORE); - OMAP24XX_SAVE(CM_AUTOIDLE4_CORE); - OMAP24XX_SAVE(CM_AUTOIDLE_WKUP); - OMAP24XX_SAVE(CM_AUTOIDLE_PLL); - OMAP24XX_SAVE(CM_AUTOIDLE_DSP); - OMAP24XX_SAVE(CM_AUTOIDLE_MDM); - - /* Save idle state registers */ - OMAP24XX_SAVE(CM_IDLEST1_CORE); - OMAP24XX_SAVE(CM_IDLEST2_CORE); - OMAP24XX_SAVE(CM_IDLEST3_CORE); - OMAP24XX_SAVE(CM_IDLEST4_CORE); - OMAP24XX_SAVE(CM_IDLEST_GFX); - OMAP24XX_SAVE(CM_IDLEST_WKUP); - OMAP24XX_SAVE(CM_IDLEST_CKGEN); - OMAP24XX_SAVE(CM_IDLEST_DSP); - OMAP24XX_SAVE(CM_IDLEST_MDM); - - /* Save clock registers */ - OMAP24XX_SAVE(CM_FCLKEN1_CORE); - OMAP24XX_SAVE(CM_FCLKEN2_CORE); - OMAP24XX_SAVE(CM_ICLKEN1_CORE); - OMAP24XX_SAVE(CM_ICLKEN2_CORE); - OMAP24XX_SAVE(CM_ICLKEN3_CORE); - OMAP24XX_SAVE(CM_ICLKEN4_CORE); -} - -static inline void omap2_pm_restore_registers(void) -{ - /* Restore clock state registers */ - OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU); - OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE); - OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX); - OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP); - OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM); - - /* Restore power state registers */ - OMAP24XX_RESTORE(PM_PWSTCTRL_MPU); - OMAP24XX_RESTORE(PM_PWSTCTRL_CORE); - OMAP24XX_RESTORE(PM_PWSTCTRL_GFX); - OMAP24XX_RESTORE(PM_PWSTCTRL_DSP); - OMAP24XX_RESTORE(PM_PWSTCTRL_MDM); - - /* Restore idle state registers */ - OMAP24XX_RESTORE(CM_IDLEST1_CORE); - OMAP24XX_RESTORE(CM_IDLEST2_CORE); - OMAP24XX_RESTORE(CM_IDLEST3_CORE); - OMAP24XX_RESTORE(CM_IDLEST4_CORE); - OMAP24XX_RESTORE(CM_IDLEST_GFX); - OMAP24XX_RESTORE(CM_IDLEST_WKUP); - OMAP24XX_RESTORE(CM_IDLEST_CKGEN); - OMAP24XX_RESTORE(CM_IDLEST_DSP); - OMAP24XX_RESTORE(CM_IDLEST_MDM); - - /* Restore autoidle registers */ - OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE); - OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE); - OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE); - OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE); - OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP); - OMAP24XX_RESTORE(CM_AUTOIDLE_PLL); - OMAP24XX_RESTORE(CM_AUTOIDLE_DSP); - OMAP24XX_RESTORE(CM_AUTOIDLE_MDM); - - /* Restore clock registers */ - OMAP24XX_RESTORE(CM_FCLKEN1_CORE); - OMAP24XX_RESTORE(CM_FCLKEN2_CORE); - OMAP24XX_RESTORE(CM_ICLKEN1_CORE); - OMAP24XX_RESTORE(CM_ICLKEN2_CORE); - OMAP24XX_RESTORE(CM_ICLKEN3_CORE); - OMAP24XX_RESTORE(CM_ICLKEN4_CORE); - - /* REVISIT: Clear interrupts here */ - - /* Restore interrupt registers */ - OMAP24XX_RESTORE(INTC_MIR0); - OMAP24XX_RESTORE(INTC_MIR1); - OMAP24XX_RESTORE(INTC_MIR2); -} - static int omap2_pm_suspend(void) { - int processor_type = 0; - - /* REVISIT: 0x21 or 0x26? */ - if (cpu_is_omap2420()) - processor_type = 0x21; - - if (!processor_type) - return -ENOTSUPP; - - local_irq_disable(); - local_fiq_disable(); - - omap2_pm_save_registers(); - - /* Disable interrupts except for the wake events */ - INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK; - INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK; - INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK; - - pmdomain_set_autoidle(); - - /* Clear old wake-up events */ - PM_WKST1_CORE = 0; - PM_WKST2_CORE = 0; - PM_WKST_WKUP = 0; - - /* Enable wake-up events */ - PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */ - PM_WKEN2_CORE = (1 << 2); /* UART3 */ - PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */ - - /* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled - * in the SRAM suspend code */ - CM_FCLKEN1_CORE = 0; - CM_FCLKEN2_CORE = 0; - CM_ICLKEN1_CORE = 0; - CM_ICLKEN3_CORE = 0; - CM_ICLKEN4_CORE = 0; - - omap2_pm_debug("Status before suspend"); - - /* Must wait for serial buffers to clear */ - mdelay(200); - - /* Jump to SRAM suspend code - * REVISIT: When is this SDRC_DLLB_CTRL? - */ - omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type); - - /* Back from sleep */ - omap2_pm_restore_registers(); - - local_fiq_enable(); - local_irq_enable(); - return 0; } @@ -357,30 +113,6 @@ static struct platform_suspend_ops omap_pm_ops = { int __init omap2_pm_init(void) { - printk("Power Management for TI OMAP.\n"); - - vclk = clk_get(NULL, "virt_prcm_set"); - if (IS_ERR(vclk)) { - printk(KERN_ERR "Could not get PM vclk\n"); - return -ENODEV; - } - - /* - * We copy the assembler sleep/wakeup routines to SRAM. - * These routines need to be in SRAM as that's the only - * memory the MPU can see when it wakes up. - */ - omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend, - omap24xx_idle_loop_suspend_sz); - - omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend, - omap24xx_cpu_suspend_sz); - - suspend_set_ops(&omap_pm_ops); - pm_idle = omap2_pm_idle; - - pmdomain_init(); - return 0; } diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h new file mode 100644 index 000000000000..cacb34086e35 --- /dev/null +++ b/arch/arm/mach-omap2/prcm-common.h @@ -0,0 +1,317 @@ +#ifndef __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H +#define __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H + +/* + * OMAP2/3 PRCM base and module definitions + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/* Module offsets from both CM_BASE & PRM_BASE */ + +/* + * Offsets that are the same on 24xx and 34xx + * + * Technically, in terms of the TRM, OCP_MOD is 34xx only; PLL_MOD is + * CCR_MOD on 3430; and GFX_MOD only exists < 3430ES2. + */ +#define OCP_MOD 0x000 +#define MPU_MOD 0x100 +#define CORE_MOD 0x200 +#define GFX_MOD 0x300 +#define WKUP_MOD 0x400 +#define PLL_MOD 0x500 + + +/* Chip-specific module offsets */ +#define OMAP24XX_DSP_MOD 0x800 + +#define OMAP2430_MDM_MOD 0xc00 + +/* IVA2 module is < base on 3430 */ +#define OMAP3430_IVA2_MOD -0x800 +#define OMAP3430ES2_SGX_MOD GFX_MOD +#define OMAP3430_CCR_MOD PLL_MOD +#define OMAP3430_DSS_MOD 0x600 +#define OMAP3430_CAM_MOD 0x700 +#define OMAP3430_PER_MOD 0x800 +#define OMAP3430_EMU_MOD 0x900 +#define OMAP3430_GR_MOD 0xa00 +#define OMAP3430_NEON_MOD 0xb00 +#define OMAP3430ES2_USBHOST_MOD 0xc00 + + +/* 24XX register bits shared between CM & PRM registers */ + +/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */ +#define OMAP2420_EN_MMC_SHIFT 26 +#define OMAP2420_EN_MMC (1 << 26) +#define OMAP24XX_EN_UART2_SHIFT 22 +#define OMAP24XX_EN_UART2 (1 << 22) +#define OMAP24XX_EN_UART1_SHIFT 21 +#define OMAP24XX_EN_UART1 (1 << 21) +#define OMAP24XX_EN_MCSPI2_SHIFT 18 +#define OMAP24XX_EN_MCSPI2 (1 << 18) +#define OMAP24XX_EN_MCSPI1_SHIFT 17 +#define OMAP24XX_EN_MCSPI1 (1 << 17) +#define OMAP24XX_EN_MCBSP2_SHIFT 16 +#define OMAP24XX_EN_MCBSP2 (1 << 16) +#define OMAP24XX_EN_MCBSP1_SHIFT 15 +#define OMAP24XX_EN_MCBSP1 (1 << 15) +#define OMAP24XX_EN_GPT12_SHIFT 14 +#define OMAP24XX_EN_GPT12 (1 << 14) +#define OMAP24XX_EN_GPT11_SHIFT 13 +#define OMAP24XX_EN_GPT11 (1 << 13) +#define OMAP24XX_EN_GPT10_SHIFT 12 +#define OMAP24XX_EN_GPT10 (1 << 12) +#define OMAP24XX_EN_GPT9_SHIFT 11 +#define OMAP24XX_EN_GPT9 (1 << 11) +#define OMAP24XX_EN_GPT8_SHIFT 10 +#define OMAP24XX_EN_GPT8 (1 << 10) +#define OMAP24XX_EN_GPT7_SHIFT 9 +#define OMAP24XX_EN_GPT7 (1 << 9) +#define OMAP24XX_EN_GPT6_SHIFT 8 +#define OMAP24XX_EN_GPT6 (1 << 8) +#define OMAP24XX_EN_GPT5_SHIFT 7 +#define OMAP24XX_EN_GPT5 (1 << 7) +#define OMAP24XX_EN_GPT4_SHIFT 6 +#define OMAP24XX_EN_GPT4 (1 << 6) +#define OMAP24XX_EN_GPT3_SHIFT 5 +#define OMAP24XX_EN_GPT3 (1 << 5) +#define OMAP24XX_EN_GPT2_SHIFT 4 +#define OMAP24XX_EN_GPT2 (1 << 4) +#define OMAP2420_EN_VLYNQ_SHIFT 3 +#define OMAP2420_EN_VLYNQ (1 << 3) + +/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */ +#define OMAP2430_EN_GPIO5_SHIFT 10 +#define OMAP2430_EN_GPIO5 (1 << 10) +#define OMAP2430_EN_MCSPI3_SHIFT 9 +#define OMAP2430_EN_MCSPI3 (1 << 9) +#define OMAP2430_EN_MMCHS2_SHIFT 8 +#define OMAP2430_EN_MMCHS2 (1 << 8) +#define OMAP2430_EN_MMCHS1_SHIFT 7 +#define OMAP2430_EN_MMCHS1 (1 << 7) +#define OMAP24XX_EN_UART3_SHIFT 2 +#define OMAP24XX_EN_UART3 (1 << 2) +#define OMAP24XX_EN_USB_SHIFT 0 +#define OMAP24XX_EN_USB (1 << 0) + +/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */ +#define OMAP2430_EN_MDM_INTC_SHIFT 11 +#define OMAP2430_EN_MDM_INTC (1 << 11) +#define OMAP2430_EN_USBHS_SHIFT 6 +#define OMAP2430_EN_USBHS (1 << 6) + +/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */ +#define OMAP2420_ST_MMC (1 << 26) +#define OMAP24XX_ST_UART2 (1 << 22) +#define OMAP24XX_ST_UART1 (1 << 21) +#define OMAP24XX_ST_MCSPI2 (1 << 18) +#define OMAP24XX_ST_MCSPI1 (1 << 17) +#define OMAP24XX_ST_GPT12 (1 << 14) +#define OMAP24XX_ST_GPT11 (1 << 13) +#define OMAP24XX_ST_GPT10 (1 << 12) +#define OMAP24XX_ST_GPT9 (1 << 11) +#define OMAP24XX_ST_GPT8 (1 << 10) +#define OMAP24XX_ST_GPT7 (1 << 9) +#define OMAP24XX_ST_GPT6 (1 << 8) +#define OMAP24XX_ST_GPT5 (1 << 7) +#define OMAP24XX_ST_GPT4 (1 << 6) +#define OMAP24XX_ST_GPT3 (1 << 5) +#define OMAP24XX_ST_GPT2 (1 << 4) +#define OMAP2420_ST_VLYNQ (1 << 3) + +/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */ +#define OMAP2430_ST_MDM_INTC (1 << 11) +#define OMAP2430_ST_GPIO5 (1 << 10) +#define OMAP2430_ST_MCSPI3 (1 << 9) +#define OMAP2430_ST_MMCHS2 (1 << 8) +#define OMAP2430_ST_MMCHS1 (1 << 7) +#define OMAP2430_ST_USBHS (1 << 6) +#define OMAP24XX_ST_UART3 (1 << 2) +#define OMAP24XX_ST_USB (1 << 0) + +/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ +#define OMAP24XX_EN_GPIOS_SHIFT 2 +#define OMAP24XX_EN_GPIOS (1 << 2) +#define OMAP24XX_EN_GPT1_SHIFT 0 +#define OMAP24XX_EN_GPT1 (1 << 0) + +/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */ +#define OMAP24XX_ST_GPIOS (1 << 2) +#define OMAP24XX_ST_GPT1 (1 << 0) + +/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */ +#define OMAP2430_ST_MDM (1 << 0) + + +/* 3430 register bits shared between CM & PRM registers */ + +/* CM_REVISION, PRM_REVISION shared bits */ +#define OMAP3430_REV_SHIFT 0 +#define OMAP3430_REV_MASK (0xff << 0) + +/* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */ +#define OMAP3430_AUTOIDLE (1 << 0) + +/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */ +#define OMAP3430_EN_MMC2 (1 << 25) +#define OMAP3430_EN_MMC2_SHIFT 25 +#define OMAP3430_EN_MMC1 (1 << 24) +#define OMAP3430_EN_MMC1_SHIFT 24 +#define OMAP3430_EN_MCSPI4 (1 << 21) +#define OMAP3430_EN_MCSPI4_SHIFT 21 +#define OMAP3430_EN_MCSPI3 (1 << 20) +#define OMAP3430_EN_MCSPI3_SHIFT 20 +#define OMAP3430_EN_MCSPI2 (1 << 19) +#define OMAP3430_EN_MCSPI2_SHIFT 19 +#define OMAP3430_EN_MCSPI1 (1 << 18) +#define OMAP3430_EN_MCSPI1_SHIFT 18 +#define OMAP3430_EN_I2C3 (1 << 17) +#define OMAP3430_EN_I2C3_SHIFT 17 +#define OMAP3430_EN_I2C2 (1 << 16) +#define OMAP3430_EN_I2C2_SHIFT 16 +#define OMAP3430_EN_I2C1 (1 << 15) +#define OMAP3430_EN_I2C1_SHIFT 15 +#define OMAP3430_EN_UART2 (1 << 14) +#define OMAP3430_EN_UART2_SHIFT 14 +#define OMAP3430_EN_UART1 (1 << 13) +#define OMAP3430_EN_UART1_SHIFT 13 +#define OMAP3430_EN_GPT11 (1 << 12) +#define OMAP3430_EN_GPT11_SHIFT 12 +#define OMAP3430_EN_GPT10 (1 << 11) +#define OMAP3430_EN_GPT10_SHIFT 11 +#define OMAP3430_EN_MCBSP5 (1 << 10) +#define OMAP3430_EN_MCBSP5_SHIFT 10 +#define OMAP3430_EN_MCBSP1 (1 << 9) +#define OMAP3430_EN_MCBSP1_SHIFT 9 +#define OMAP3430_EN_FSHOSTUSB (1 << 5) +#define OMAP3430_EN_FSHOSTUSB_SHIFT 5 +#define OMAP3430_EN_D2D (1 << 3) +#define OMAP3430_EN_D2D_SHIFT 3 + +/* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */ +#define OMAP3430_EN_HSOTGUSB (1 << 4) +#define OMAP3430_EN_HSOTGUSB_SHIFT 4 + +/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */ +#define OMAP3430_ST_MMC2 (1 << 25) +#define OMAP3430_ST_MMC1 (1 << 24) +#define OMAP3430_ST_MCSPI4 (1 << 21) +#define OMAP3430_ST_MCSPI3 (1 << 20) +#define OMAP3430_ST_MCSPI2 (1 << 19) +#define OMAP3430_ST_MCSPI1 (1 << 18) +#define OMAP3430_ST_I2C3 (1 << 17) +#define OMAP3430_ST_I2C2 (1 << 16) +#define OMAP3430_ST_I2C1 (1 << 15) +#define OMAP3430_ST_UART2 (1 << 14) +#define OMAP3430_ST_UART1 (1 << 13) +#define OMAP3430_ST_GPT11 (1 << 12) +#define OMAP3430_ST_GPT10 (1 << 11) +#define OMAP3430_ST_MCBSP5 (1 << 10) +#define OMAP3430_ST_MCBSP1 (1 << 9) +#define OMAP3430_ST_FSHOSTUSB (1 << 5) +#define OMAP3430_ST_HSOTGUSB (1 << 4) +#define OMAP3430_ST_D2D (1 << 3) + +/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ +#define OMAP3430_EN_GPIO1 (1 << 3) +#define OMAP3430_EN_GPIO1_SHIFT 3 +#define OMAP3430_EN_GPT1 (1 << 0) +#define OMAP3430_EN_GPT1_SHIFT 0 + +/* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */ +#define OMAP3430_EN_SR2 (1 << 7) +#define OMAP3430_EN_SR2_SHIFT 7 +#define OMAP3430_EN_SR1 (1 << 6) +#define OMAP3430_EN_SR1_SHIFT 6 + +/* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ +#define OMAP3430_EN_GPT12 (1 << 1) +#define OMAP3430_EN_GPT12_SHIFT 1 + +/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */ +#define OMAP3430_ST_SR2 (1 << 7) +#define OMAP3430_ST_SR1 (1 << 6) +#define OMAP3430_ST_GPIO1 (1 << 3) +#define OMAP3430_ST_GPT12 (1 << 1) +#define OMAP3430_ST_GPT1 (1 << 0) + +/* + * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM, + * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX, + * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits + */ +#define OMAP3430_EN_MPU (1 << 1) +#define OMAP3430_EN_MPU_SHIFT 1 + +/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */ +#define OMAP3430_EN_GPIO6 (1 << 17) +#define OMAP3430_EN_GPIO6_SHIFT 17 +#define OMAP3430_EN_GPIO5 (1 << 16) +#define OMAP3430_EN_GPIO5_SHIFT 16 +#define OMAP3430_EN_GPIO4 (1 << 15) +#define OMAP3430_EN_GPIO4_SHIFT 15 +#define OMAP3430_EN_GPIO3 (1 << 14) +#define OMAP3430_EN_GPIO3_SHIFT 14 +#define OMAP3430_EN_GPIO2 (1 << 13) +#define OMAP3430_EN_GPIO2_SHIFT 13 +#define OMAP3430_EN_UART3 (1 << 11) +#define OMAP3430_EN_UART3_SHIFT 11 +#define OMAP3430_EN_GPT9 (1 << 10) +#define OMAP3430_EN_GPT9_SHIFT 10 +#define OMAP3430_EN_GPT8 (1 << 9) +#define OMAP3430_EN_GPT8_SHIFT 9 +#define OMAP3430_EN_GPT7 (1 << 8) +#define OMAP3430_EN_GPT7_SHIFT 8 +#define OMAP3430_EN_GPT6 (1 << 7) +#define OMAP3430_EN_GPT6_SHIFT 7 +#define OMAP3430_EN_GPT5 (1 << 6) +#define OMAP3430_EN_GPT5_SHIFT 6 +#define OMAP3430_EN_GPT4 (1 << 5) +#define OMAP3430_EN_GPT4_SHIFT 5 +#define OMAP3430_EN_GPT3 (1 << 4) +#define OMAP3430_EN_GPT3_SHIFT 4 +#define OMAP3430_EN_GPT2 (1 << 3) +#define OMAP3430_EN_GPT2_SHIFT 3 + +/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */ +/* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits + * be ST_* bits instead? */ +#define OMAP3430_EN_MCBSP4 (1 << 2) +#define OMAP3430_EN_MCBSP4_SHIFT 2 +#define OMAP3430_EN_MCBSP3 (1 << 1) +#define OMAP3430_EN_MCBSP3_SHIFT 1 +#define OMAP3430_EN_MCBSP2 (1 << 0) +#define OMAP3430_EN_MCBSP2_SHIFT 0 + +/* CM_IDLEST_PER, PM_WKST_PER shared bits */ +#define OMAP3430_ST_GPIO6 (1 << 17) +#define OMAP3430_ST_GPIO5 (1 << 16) +#define OMAP3430_ST_GPIO4 (1 << 15) +#define OMAP3430_ST_GPIO3 (1 << 14) +#define OMAP3430_ST_GPIO2 (1 << 13) +#define OMAP3430_ST_UART3 (1 << 11) +#define OMAP3430_ST_GPT9 (1 << 10) +#define OMAP3430_ST_GPT8 (1 << 9) +#define OMAP3430_ST_GPT7 (1 << 8) +#define OMAP3430_ST_GPT6 (1 << 7) +#define OMAP3430_ST_GPT5 (1 << 6) +#define OMAP3430_ST_GPT4 (1 << 5) +#define OMAP3430_ST_GPT3 (1 << 4) +#define OMAP3430_ST_GPT2 (1 << 3) + +/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */ +#define OMAP3430_EN_CORE (1 << 0) + +#endif + diff --git a/arch/arm/mach-omap2/prcm-regs.h b/arch/arm/mach-omap2/prcm-regs.h deleted file mode 100644 index 5e1c4b53ee9d..000000000000 --- a/arch/arm/mach-omap2/prcm-regs.h +++ /dev/null @@ -1,483 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/prcm-regs.h - * - * OMAP24XX Power Reset and Clock Management (PRCM) registers - * - * Copyright (C) 2005 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H -#define __ARCH_ARM_MACH_OMAP2_PRCM_H - -/* SET_PERFORMANCE_LEVEL PARAMETERS */ -#define PRCM_HALF_SPEED 1 -#define PRCM_FULL_SPEED 2 - -#ifndef __ASSEMBLER__ - -#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset)) - -#define PRCM_REVISION PRCM_REG32(0x000) -#define PRCM_SYSCONFIG PRCM_REG32(0x010) -#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018) -#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C) -#define PRCM_VOLTCTRL PRCM_REG32(0x050) -#define PRCM_VOLTST PRCM_REG32(0x054) -#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060) -#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070) -#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078) -#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080) -#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084) -#define PRCM_VOLTSETUP PRCM_REG32(0x090) -#define PRCM_CLKSSETUP PRCM_REG32(0x094) -#define PRCM_POLCTRL PRCM_REG32(0x098) - -/* GENERAL PURPOSE */ -#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0) -#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4) -#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8) -#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC) -#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0) -#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4) -#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8) -#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC) -#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0) -#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4) -#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8) -#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC) -#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0) -#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4) -#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8) -#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC) -#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0) -#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4) -#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8) -#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC) - -/* MPU */ -#define CM_CLKSEL_MPU PRCM_REG32(0x140) -#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148) -#define RM_RSTST_MPU PRCM_REG32(0x158) -#define PM_WKDEP_MPU PRCM_REG32(0x1C8) -#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4) -#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8) -#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC) -#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0) -#define PM_PWSTST_MPU PRCM_REG32(0x1E4) - -/* CORE */ -#define CM_FCLKEN1_CORE PRCM_REG32(0x200) -#define CM_FCLKEN2_CORE PRCM_REG32(0x204) -#define CM_FCLKEN3_CORE PRCM_REG32(0x208) -#define CM_ICLKEN1_CORE PRCM_REG32(0x210) -#define CM_ICLKEN2_CORE PRCM_REG32(0x214) -#define CM_ICLKEN3_CORE PRCM_REG32(0x218) -#define CM_ICLKEN4_CORE PRCM_REG32(0x21C) -#define CM_IDLEST1_CORE PRCM_REG32(0x220) -#define CM_IDLEST2_CORE PRCM_REG32(0x224) -#define CM_IDLEST3_CORE PRCM_REG32(0x228) -#define CM_IDLEST4_CORE PRCM_REG32(0x22C) -#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230) -#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234) -#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238) -#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C) -#define CM_CLKSEL1_CORE PRCM_REG32(0x240) -#define CM_CLKSEL2_CORE PRCM_REG32(0x244) -#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248) -#define PM_WKEN1_CORE PRCM_REG32(0x2A0) -#define PM_WKEN2_CORE PRCM_REG32(0x2A4) -#define PM_WKST1_CORE PRCM_REG32(0x2B0) -#define PM_WKST2_CORE PRCM_REG32(0x2B4) -#define PM_WKDEP_CORE PRCM_REG32(0x2C8) -#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0) -#define PM_PWSTST_CORE PRCM_REG32(0x2E4) - -/* GFX */ -#define CM_FCLKEN_GFX PRCM_REG32(0x300) -#define CM_ICLKEN_GFX PRCM_REG32(0x310) -#define CM_IDLEST_GFX PRCM_REG32(0x320) -#define CM_CLKSEL_GFX PRCM_REG32(0x340) -#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348) -#define RM_RSTCTRL_GFX PRCM_REG32(0x350) -#define RM_RSTST_GFX PRCM_REG32(0x358) -#define PM_WKDEP_GFX PRCM_REG32(0x3C8) -#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0) -#define PM_PWSTST_GFX PRCM_REG32(0x3E4) - -/* WAKE-UP */ -#define CM_FCLKEN_WKUP PRCM_REG32(0x400) -#define CM_ICLKEN_WKUP PRCM_REG32(0x410) -#define CM_IDLEST_WKUP PRCM_REG32(0x420) -#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430) -#define CM_CLKSEL_WKUP PRCM_REG32(0x440) -#define RM_RSTCTRL_WKUP PRCM_REG32(0x450) -#define RM_RSTTIME_WKUP PRCM_REG32(0x454) -#define RM_RSTST_WKUP PRCM_REG32(0x458) -#define PM_WKEN_WKUP PRCM_REG32(0x4A0) -#define PM_WKST_WKUP PRCM_REG32(0x4B0) - -/* CLOCKS */ -#define CM_CLKEN_PLL PRCM_REG32(0x500) -#define CM_IDLEST_CKGEN PRCM_REG32(0x520) -#define CM_AUTOIDLE_PLL PRCM_REG32(0x530) -#define CM_CLKSEL1_PLL PRCM_REG32(0x540) -#define CM_CLKSEL2_PLL PRCM_REG32(0x544) - -/* DSP */ -#define CM_FCLKEN_DSP PRCM_REG32(0x800) -#define CM_ICLKEN_DSP PRCM_REG32(0x810) -#define CM_IDLEST_DSP PRCM_REG32(0x820) -#define CM_AUTOIDLE_DSP PRCM_REG32(0x830) -#define CM_CLKSEL_DSP PRCM_REG32(0x840) -#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848) -#define RM_RSTCTRL_DSP PRCM_REG32(0x850) -#define RM_RSTST_DSP PRCM_REG32(0x858) -#define PM_WKEN_DSP PRCM_REG32(0x8A0) -#define PM_WKDEP_DSP PRCM_REG32(0x8C8) -#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0) -#define PM_PWSTST_DSP PRCM_REG32(0x8E4) -#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0) -#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4) - -/* IVA */ -#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8) -#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC) - -/* Modem on 2430 */ -#define CM_FCLKEN_MDM PRCM_REG32(0xC00) -#define CM_ICLKEN_MDM PRCM_REG32(0xC10) -#define CM_IDLEST_MDM PRCM_REG32(0xC20) -#define CM_AUTOIDLE_MDM PRCM_REG32(0xC30) -#define CM_CLKSEL_MDM PRCM_REG32(0xC40) -#define CM_CLKSTCTRL_MDM PRCM_REG32(0xC48) -#define RM_RSTCTRL_MDM PRCM_REG32(0xC50) -#define RM_RSTST_MDM PRCM_REG32(0xC58) -#define PM_WKEN_MDM PRCM_REG32(0xCA0) -#define PM_WKST_MDM PRCM_REG32(0xCB0) -#define PM_WKDEP_MDM PRCM_REG32(0xCC8) -#define PM_PWSTCTRL_MDM PRCM_REG32(0xCE0) -#define PM_PWSTST_MDM PRCM_REG32(0xCE4) - -#define OMAP24XX_L4_IO_BASE 0x48000000 - -#define DISP_BASE (OMAP24XX_L4_IO_BASE + 0x50000) -#define DISP_REG32(offset) __REG32(DISP_BASE + (offset)) - -#define OMAP24XX_GPMC_BASE (L3_24XX_BASE + 0xa000) -#define GPMC_REG32(offset) __REG32(OMAP24XX_GPMC_BASE + (offset)) - -/* FIXME: Move these to timer code */ -#define GPT1_BASE (0x48028000) -#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset)) - -/* Misc sysconfig */ -#define DISPC_SYSCONFIG DISP_REG32(0x410) -#define SPI_BASE (OMAP24XX_L4_IO_BASE + 0x98000) -#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10) -#define MCSPI2_SYSCONFIG __REG32(SPI_BASE + 0x2000 + 0x10) -#define MCSPI3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0xb8010) - -#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE + 0x2C10) -#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE + 0x282C) -#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE + 0x602C) -#define GPMC_SYSCONFIG GPMC_REG32(0x010) -#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x94010) -#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6A054) -#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6C054) -#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6E054) -#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE + 0x10) -#define OMAP24XX_SMS_BASE (L3_24XX_BASE + 0x8000) -#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE + 0x10) -#define SSI_SYSCONFIG __REG32(DISP_BASE + 0x8010) - -/* rkw - good cannidates for PM_ to start what nm was trying */ -#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE + 0x2A000) -#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE + 0x78000) -#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE + 0x7A000) -#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE + 0x7C000) -#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE + 0x7E000) -#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE + 0x80000) -#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE + 0x82000) -#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE + 0x84000) -#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE + 0x86000) -#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE + 0x88000) -#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE + 0x8A000) - -/* FIXME: Move these to timer code */ -#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010) -#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10) -#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10) -#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10) -#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10) -#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10) -#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10) -#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10) -#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10) -#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10) -#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10) -#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10) - -/* FIXME: Move these to gpio code */ -#define OMAP24XX_GPIO_BASE 0x48018000 -#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE + (0x2000 * ((X) - 1))) - -#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1) + 0x10)) -#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2) + 0x10)) -#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3) + 0x10)) -#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4) + 0x10)) - -#if defined(CONFIG_ARCH_OMAP243X) -#define GPIO5_SYSCONFIG __REG32((OMAP24XX_GPIO5_BASE + 0x10)) -#endif - -/* GP TIMER 1 */ -#define GPTIMER1_TISTAT GPT1_REG32(0x014) -#define GPTIMER1_TISR GPT1_REG32(0x018) -#define GPTIMER1_TIER GPT1_REG32(0x01C) -#define GPTIMER1_TWER GPT1_REG32(0x020) -#define GPTIMER1_TCLR GPT1_REG32(0x024) -#define GPTIMER1_TCRR GPT1_REG32(0x028) -#define GPTIMER1_TLDR GPT1_REG32(0x02C) -#define GPTIMER1_TTGR GPT1_REG32(0x030) -#define GPTIMER1_TWPS GPT1_REG32(0x034) -#define GPTIMER1_TMAR GPT1_REG32(0x038) -#define GPTIMER1_TCAR1 GPT1_REG32(0x03C) -#define GPTIMER1_TSICR GPT1_REG32(0x040) -#define GPTIMER1_TCAR2 GPT1_REG32(0x044) - -/* rkw -- base fix up please... */ -#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE + 0x78018) - -/* SDRC */ -#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x060) -#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x064) -#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x068) -#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x06C) -#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE + 0x070) -#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE + 0x084) - -/* GPIO 1 */ -#define GPIO1_BASE GPIOX_BASE(1) -#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset)) -#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C) -#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018) -#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C) -#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028) -#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020) -#define GPIO1_RISINGDETECT GPIO1_REG32(0x048) -#define GPIO1_DATAIN GPIO1_REG32(0x038) -#define GPIO1_OE GPIO1_REG32(0x034) -#define GPIO1_DATAOUT GPIO1_REG32(0x03C) - -/* GPIO2 */ -#define GPIO2_BASE GPIOX_BASE(2) -#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset)) -#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C) -#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018) -#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C) -#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028) -#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020) -#define GPIO2_RISINGDETECT GPIO2_REG32(0x048) -#define GPIO2_DATAIN GPIO2_REG32(0x038) -#define GPIO2_OE GPIO2_REG32(0x034) -#define GPIO2_DATAOUT GPIO2_REG32(0x03C) -#define GPIO2_DEBOUNCENABLE GPIO2_REG32(0x050) -#define GPIO2_DEBOUNCINGTIME GPIO2_REG32(0x054) - -/* GPIO 3 */ -#define GPIO3_BASE GPIOX_BASE(3) -#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset)) -#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C) -#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018) -#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C) -#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028) -#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020) -#define GPIO3_RISINGDETECT GPIO3_REG32(0x048) -#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C) -#define GPIO3_DATAIN GPIO3_REG32(0x038) -#define GPIO3_OE GPIO3_REG32(0x034) -#define GPIO3_DATAOUT GPIO3_REG32(0x03C) -#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050) -#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054) -#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050) -#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054) - -/* GPIO 4 */ -#define GPIO4_BASE GPIOX_BASE(4) -#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset)) -#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C) -#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018) -#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C) -#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028) -#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020) -#define GPIO4_RISINGDETECT GPIO4_REG32(0x048) -#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C) -#define GPIO4_DATAIN GPIO4_REG32(0x038) -#define GPIO4_OE GPIO4_REG32(0x034) -#define GPIO4_DATAOUT GPIO4_REG32(0x03C) -#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050) -#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054) - -#if defined(CONFIG_ARCH_OMAP243X) -/* GPIO 5 */ -#define GPIO5_REG32(offset) __REG32((OMAP24XX_GPIO5_BASE + (offset))) -#define GPIO5_IRQENABLE1 GPIO5_REG32(0x01C) -#define GPIO5_IRQSTATUS1 GPIO5_REG32(0x018) -#define GPIO5_IRQENABLE2 GPIO5_REG32(0x02C) -#define GPIO5_IRQSTATUS2 GPIO5_REG32(0x028) -#define GPIO5_WAKEUPENABLE GPIO5_REG32(0x020) -#define GPIO5_RISINGDETECT GPIO5_REG32(0x048) -#define GPIO5_FALLINGDETECT GPIO5_REG32(0x04C) -#define GPIO5_DATAIN GPIO5_REG32(0x038) -#define GPIO5_OE GPIO5_REG32(0x034) -#define GPIO5_DATAOUT GPIO5_REG32(0x03C) -#define GPIO5_DEBOUNCENABLE GPIO5_REG32(0x050) -#define GPIO5_DEBOUNCINGTIME GPIO5_REG32(0x054) -#endif - -/* IO CONFIG */ -#define OMAP24XX_CTRL_BASE (L4_24XX_BASE) -#define CONTROL_REG32(offset) __REG32(OMAP24XX_CTRL_BASE + (offset)) - -#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104) -#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134) -#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8) -#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C) -#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090) -#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8) -#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) /* 2420 */ -#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0) -#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC) -#define CONTROL_PADCONF_SYS_NIRQW0 CONTROL_REG32(0x0BC) /* 2430 */ -#define CONTROL_PADCONF_SSI1_FLAG_TX CONTROL_REG32(0x108) /* 2430 */ - -/* CONTROL */ -#define CONTROL_DEVCONF CONTROL_REG32(0x274) -#define CONTROL_DEVCONF1 CONTROL_REG32(0x2E8) - -/* INTERRUPT CONTROLLER */ -#define INTC_BASE ((L4_24XX_BASE) + 0xfe000) -#define INTC_REG32(offset) __REG32(INTC_BASE + (offset)) - -#define INTC1_U_BASE INTC_REG32(0x000) -#define INTC_MIR0 INTC_REG32(0x084) -#define INTC_MIR_SET0 INTC_REG32(0x08C) -#define INTC_MIR_CLEAR0 INTC_REG32(0x088) -#define INTC_ISR_CLEAR0 INTC_REG32(0x094) -#define INTC_MIR1 INTC_REG32(0x0A4) -#define INTC_MIR_SET1 INTC_REG32(0x0AC) -#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8) -#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4) -#define INTC_MIR2 INTC_REG32(0x0C4) -#define INTC_MIR_SET2 INTC_REG32(0x0CC) -#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8) -#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4) -#define INTC_SIR_IRQ INTC_REG32(0x040) -#define INTC_CONTROL INTC_REG32(0x048) -#define INTC_ILR11 INTC_REG32(0x12C) /* PRCM on MPU PIC */ -#define INTC_ILR30 INTC_REG32(0x178) -#define INTC_ILR31 INTC_REG32(0x17C) -#define INTC_ILR32 INTC_REG32(0x180) -#define INTC_ILR37 INTC_REG32(0x194) /* GPIO4 on MPU PIC */ -#define INTC_SYSCONFIG INTC_REG32(0x010) /* GPT1 on MPU PIC */ - -/* RAM FIREWALL */ -#define RAMFW_BASE (0x68005000) -#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset)) - -#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048) -#define RAMFW_READPERM0 RAMFW_REG32(0x050) -#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058) - -/* GPMC CS1 FPGA ON USER INTERFACE MODULE */ -//#define DEBUG_BOARD_LED_REGISTER 0x04000014 - -/* GPMC CS0 */ -#define GPMC_CONFIG1_0 GPMC_REG32(0x060) -#define GPMC_CONFIG2_0 GPMC_REG32(0x064) -#define GPMC_CONFIG3_0 GPMC_REG32(0x068) -#define GPMC_CONFIG4_0 GPMC_REG32(0x06C) -#define GPMC_CONFIG5_0 GPMC_REG32(0x070) -#define GPMC_CONFIG6_0 GPMC_REG32(0x074) -#define GPMC_CONFIG7_0 GPMC_REG32(0x078) - -/* GPMC CS1 */ -#define GPMC_CONFIG1_1 GPMC_REG32(0x090) -#define GPMC_CONFIG2_1 GPMC_REG32(0x094) -#define GPMC_CONFIG3_1 GPMC_REG32(0x098) -#define GPMC_CONFIG4_1 GPMC_REG32(0x09C) -#define GPMC_CONFIG5_1 GPMC_REG32(0x0a0) -#define GPMC_CONFIG6_1 GPMC_REG32(0x0a4) -#define GPMC_CONFIG7_1 GPMC_REG32(0x0a8) - -/* GPMC CS3 */ -#define GPMC_CONFIG1_3 GPMC_REG32(0x0F0) -#define GPMC_CONFIG2_3 GPMC_REG32(0x0F4) -#define GPMC_CONFIG3_3 GPMC_REG32(0x0F8) -#define GPMC_CONFIG4_3 GPMC_REG32(0x0FC) -#define GPMC_CONFIG5_3 GPMC_REG32(0x100) -#define GPMC_CONFIG6_3 GPMC_REG32(0x104) -#define GPMC_CONFIG7_3 GPMC_REG32(0x108) - -/* DSS */ -#define DSS_CONTROL DISP_REG32(0x040) -#define DISPC_CONTROL DISP_REG32(0x440) -#define DISPC_SYSSTATUS DISP_REG32(0x414) -#define DISPC_IRQSTATUS DISP_REG32(0x418) -#define DISPC_IRQENABLE DISP_REG32(0x41C) -#define DISPC_CONFIG DISP_REG32(0x444) -#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C) -#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450) -#define DISPC_TRANS_COLOR0 DISP_REG32(0x454) -#define DISPC_TRANS_COLOR1 DISP_REG32(0x458) -#define DISPC_LINE_NUMBER DISP_REG32(0x460) -#define DISPC_TIMING_H DISP_REG32(0x464) -#define DISPC_TIMING_V DISP_REG32(0x468) -#define DISPC_POL_FREQ DISP_REG32(0x46C) -#define DISPC_DIVISOR DISP_REG32(0x470) -#define DISPC_SIZE_DIG DISP_REG32(0x478) -#define DISPC_SIZE_LCD DISP_REG32(0x47C) -#define DISPC_GFX_BA0 DISP_REG32(0x480) -#define DISPC_GFX_BA1 DISP_REG32(0x484) -#define DISPC_GFX_POSITION DISP_REG32(0x488) -#define DISPC_GFX_SIZE DISP_REG32(0x48C) -#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0) -#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4) -#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC) -#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0) -#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4) -#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8) -#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4) -#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8) -#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC) - -/* HSUSB Suspend */ -#define HSUSB_CTRL __REG8(0x480AC001) -#define USBOTG_POWER __REG32(0x480AC000) - -/* HS MMC */ -#define MMCHS1_SYSCONFIG __REG32(0x4809C010) -#define MMCHS2_SYSCONFIG __REG32(0x480b4010) - -#endif /* __ASSEMBLER__ */ - -#endif - - - - - diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 90f530540c65..b12f423b8595 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -17,19 +17,27 @@ #include <linux/init.h> #include <linux/clk.h> -#include "prcm-regs.h" +#include <asm/io.h> + +#include "prm.h" +#include "prm-regbits-24xx.h" extern void omap2_clk_prepare_for_reboot(void); u32 omap_prcm_get_reset_sources(void) { - return RM_RSTST_WKUP & 0x7f; + return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f; } EXPORT_SYMBOL(omap_prcm_get_reset_sources); /* Resets clock rates and reboots the system. Only called from system.h */ void omap_prcm_arch_reset(char mode) { + u32 wkup; omap2_clk_prepare_for_reboot(); - RM_RSTCTRL_WKUP |= 2; + + if (cpu_is_omap24xx()) { + wkup = prm_read_mod_reg(WKUP_MOD, RM_RSTCTRL) | OMAP_RST_DPLL3; + prm_write_mod_reg(wkup, WKUP_MOD, RM_RSTCTRL); + } } diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h new file mode 100644 index 000000000000..c6d17a3378ec --- /dev/null +++ b/arch/arm/mach-omap2/prm-regbits-24xx.h @@ -0,0 +1,279 @@ +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H + +/* + * OMAP24XX Power/Reset Management register bits + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "prm.h" + +/* Bits shared between registers */ + +/* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */ +#define OMAP24XX_VOLTTRANS_ST (1 << 2) +#define OMAP24XX_WKUP2_ST (1 << 1) +#define OMAP24XX_WKUP1_ST (1 << 0) + +/* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */ +#define OMAP24XX_VOLTTRANS_EN (1 << 2) +#define OMAP24XX_WKUP2_EN (1 << 1) +#define OMAP24XX_WKUP1_EN (1 << 0) + +/* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */ +#define OMAP24XX_EN_MPU (1 << 1) +#define OMAP24XX_EN_CORE (1 << 0) + +/* + * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM + * shared bits + */ +#define OMAP24XX_MEMONSTATE_SHIFT 10 +#define OMAP24XX_MEMONSTATE_MASK (0x3 << 10) +#define OMAP24XX_MEMRETSTATE (1 << 3) + +/* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */ +#define OMAP24XX_FORCESTATE (1 << 18) + +/* + * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP, + * PM_PWSTST_MDM shared bits + */ +#define OMAP24XX_CLKACTIVITY (1 << 19) + +/* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */ +#define OMAP24XX_LASTSTATEENTERED_SHIFT 4 +#define OMAP24XX_LASTSTATEENTERED_MASK (0x3 << 4) + +/* PM_PWSTST_MPU and PM_PWSTST_DSP shared bits */ +#define OMAP2430_MEMSTATEST_SHIFT 10 +#define OMAP2430_MEMSTATEST_MASK (0x3 << 10) + +/* PM_PWSTST_GFX, PM_PWSTST_DSP, PM_PWSTST_MDM shared bits */ +#define OMAP24XX_POWERSTATEST_SHIFT 0 +#define OMAP24XX_POWERSTATEST_MASK (0x3 << 0) + + +/* Bits specific to each register */ + +/* PRCM_REVISION */ +#define OMAP24XX_REV_SHIFT 0 +#define OMAP24XX_REV_MASK (0xff << 0) + +/* PRCM_SYSCONFIG */ +#define OMAP24XX_AUTOIDLE (1 << 0) + +/* PRCM_IRQSTATUS_MPU specific bits */ +#define OMAP2430_DPLL_RECAL_ST (1 << 6) +#define OMAP24XX_TRANSITION_ST (1 << 5) +#define OMAP24XX_EVGENOFF_ST (1 << 4) +#define OMAP24XX_EVGENON_ST (1 << 3) + +/* PRCM_IRQENABLE_MPU specific bits */ +#define OMAP2430_DPLL_RECAL_EN (1 << 6) +#define OMAP24XX_TRANSITION_EN (1 << 5) +#define OMAP24XX_EVGENOFF_EN (1 << 4) +#define OMAP24XX_EVGENON_EN (1 << 3) + +/* PRCM_VOLTCTRL */ +#define OMAP24XX_AUTO_EXTVOLT (1 << 15) +#define OMAP24XX_FORCE_EXTVOLT (1 << 14) +#define OMAP24XX_SETOFF_LEVEL_SHIFT 12 +#define OMAP24XX_SETOFF_LEVEL_MASK (0x3 << 12) +#define OMAP24XX_MEMRETCTRL (1 << 8) +#define OMAP24XX_SETRET_LEVEL_SHIFT 6 +#define OMAP24XX_SETRET_LEVEL_MASK (0x3 << 6) +#define OMAP24XX_VOLT_LEVEL_SHIFT 0 +#define OMAP24XX_VOLT_LEVEL_MASK (0x3 << 0) + +/* PRCM_VOLTST */ +#define OMAP24XX_ST_VOLTLEVEL_SHIFT 0 +#define OMAP24XX_ST_VOLTLEVEL_MASK (0x3 << 0) + +/* PRCM_CLKSRC_CTRL specific bits */ + +/* PRCM_CLKOUT_CTRL */ +#define OMAP2420_CLKOUT2_EN_SHIFT 15 +#define OMAP2420_CLKOUT2_EN (1 << 15) +#define OMAP2420_CLKOUT2_DIV_SHIFT 11 +#define OMAP2420_CLKOUT2_DIV_MASK (0x7 << 11) +#define OMAP2420_CLKOUT2_SOURCE_SHIFT 8 +#define OMAP2420_CLKOUT2_SOURCE_MASK (0x3 << 8) +#define OMAP24XX_CLKOUT_EN_SHIFT 7 +#define OMAP24XX_CLKOUT_EN (1 << 7) +#define OMAP24XX_CLKOUT_DIV_SHIFT 3 +#define OMAP24XX_CLKOUT_DIV_MASK (0x7 << 3) +#define OMAP24XX_CLKOUT_SOURCE_SHIFT 0 +#define OMAP24XX_CLKOUT_SOURCE_MASK (0x3 << 0) + +/* PRCM_CLKEMUL_CTRL */ +#define OMAP24XX_EMULATION_EN_SHIFT 0 +#define OMAP24XX_EMULATION_EN (1 << 0) + +/* PRCM_CLKCFG_CTRL */ +#define OMAP24XX_VALID_CONFIG (1 << 0) + +/* PRCM_CLKCFG_STATUS */ +#define OMAP24XX_CONFIG_STATUS (1 << 0) + +/* PRCM_VOLTSETUP specific bits */ + +/* PRCM_CLKSSETUP specific bits */ + +/* PRCM_POLCTRL */ +#define OMAP2420_CLKOUT2_POL (1 << 10) +#define OMAP24XX_CLKOUT_POL (1 << 9) +#define OMAP24XX_CLKREQ_POL (1 << 8) +#define OMAP2430_USE_POWEROK (1 << 2) +#define OMAP2430_POWEROK_POL (1 << 1) +#define OMAP24XX_EXTVOL_POL (1 << 0) + +/* RM_RSTST_MPU specific bits */ +/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */ + +/* PM_WKDEP_MPU specific bits */ +#define OMAP2430_PM_WKDEP_MPU_EN_MDM (1 << 5) +#define OMAP24XX_PM_WKDEP_MPU_EN_DSP (1 << 2) + +/* PM_EVGENCTRL_MPU specific bits */ + +/* PM_EVEGENONTIM_MPU specific bits */ + +/* PM_EVEGENOFFTIM_MPU specific bits */ + +/* PM_PWSTCTRL_MPU specific bits */ +#define OMAP2430_FORCESTATE (1 << 18) + +/* PM_PWSTST_MPU specific bits */ +/* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */ + +/* PM_WKEN1_CORE specific bits */ + +/* PM_WKEN2_CORE specific bits */ + +/* PM_WKST1_CORE specific bits*/ + +/* PM_WKST2_CORE specific bits */ + +/* PM_WKDEP_CORE specific bits*/ +#define OMAP2430_PM_WKDEP_CORE_EN_MDM (1 << 5) +#define OMAP24XX_PM_WKDEP_CORE_EN_GFX (1 << 3) +#define OMAP24XX_PM_WKDEP_CORE_EN_DSP (1 << 2) + +/* PM_PWSTCTRL_CORE specific bits */ +#define OMAP24XX_MEMORYCHANGE (1 << 20) +#define OMAP24XX_MEM3ONSTATE_SHIFT 14 +#define OMAP24XX_MEM3ONSTATE_MASK (0x3 << 14) +#define OMAP24XX_MEM2ONSTATE_SHIFT 12 +#define OMAP24XX_MEM2ONSTATE_MASK (0x3 << 12) +#define OMAP24XX_MEM1ONSTATE_SHIFT 10 +#define OMAP24XX_MEM1ONSTATE_MASK (0x3 << 10) +#define OMAP24XX_MEM3RETSTATE (1 << 5) +#define OMAP24XX_MEM2RETSTATE (1 << 4) +#define OMAP24XX_MEM1RETSTATE (1 << 3) + +/* PM_PWSTST_CORE specific bits */ +#define OMAP24XX_MEM3STATEST_SHIFT 14 +#define OMAP24XX_MEM3STATEST_MASK (0x3 << 14) +#define OMAP24XX_MEM2STATEST_SHIFT 12 +#define OMAP24XX_MEM2STATEST_MASK (0x3 << 12) +#define OMAP24XX_MEM1STATEST_SHIFT 10 +#define OMAP24XX_MEM1STATEST_MASK (0x3 << 10) + +/* RM_RSTCTRL_GFX */ +#define OMAP24XX_GFX_RST (1 << 0) + +/* RM_RSTST_GFX specific bits */ +#define OMAP24XX_GFX_SW_RST (1 << 4) + +/* PM_PWSTCTRL_GFX specific bits */ + +/* PM_WKDEP_GFX specific bits */ +/* 2430 often calls EN_WAKEUP "EN_WKUP" */ + +/* RM_RSTCTRL_WKUP specific bits */ + +/* RM_RSTTIME_WKUP specific bits */ + +/* RM_RSTST_WKUP specific bits */ +/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */ +#define OMAP24XX_EXTWMPU_RST (1 << 6) +#define OMAP24XX_SECU_WD_RST (1 << 5) +#define OMAP24XX_MPU_WD_RST (1 << 4) +#define OMAP24XX_SECU_VIOL_RST (1 << 3) + +/* PM_WKEN_WKUP specific bits */ + +/* PM_WKST_WKUP specific bits */ + +/* RM_RSTCTRL_DSP */ +#define OMAP2420_RST_IVA (1 << 8) +#define OMAP24XX_RST2_DSP (1 << 1) +#define OMAP24XX_RST1_DSP (1 << 0) + +/* RM_RSTST_DSP specific bits */ +/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */ +#define OMAP2420_IVA_SW_RST (1 << 8) +#define OMAP24XX_DSP_SW_RST2 (1 << 5) +#define OMAP24XX_DSP_SW_RST1 (1 << 4) + +/* PM_WKDEP_DSP specific bits */ + +/* PM_PWSTCTRL_DSP specific bits */ +/* 2430 only: MEMONSTATE, MEMRETSTATE */ +#define OMAP2420_MEMIONSTATE_SHIFT 12 +#define OMAP2420_MEMIONSTATE_MASK (0x3 << 12) +#define OMAP2420_MEMIRETSTATE (1 << 4) + +/* PM_PWSTST_DSP specific bits */ +/* MEMSTATEST is 2430 only */ +#define OMAP2420_MEMISTATEST_SHIFT 12 +#define OMAP2420_MEMISTATEST_MASK (0x3 << 12) + +/* PRCM_IRQSTATUS_DSP specific bits */ + +/* PRCM_IRQENABLE_DSP specific bits */ + +/* RM_RSTCTRL_MDM */ +/* 2430 only */ +#define OMAP2430_PWRON1_MDM (1 << 1) +#define OMAP2430_RST1_MDM (1 << 0) + +/* RM_RSTST_MDM specific bits */ +/* 2430 only */ +#define OMAP2430_MDM_SECU_VIOL (1 << 6) +#define OMAP2430_MDM_SW_PWRON1 (1 << 5) +#define OMAP2430_MDM_SW_RST1 (1 << 4) + +/* PM_WKEN_MDM */ +/* 2430 only */ +#define OMAP2430_PM_WKEN_MDM_EN_MDM (1 << 0) + +/* PM_WKST_MDM specific bits */ +/* 2430 only */ + +/* PM_WKDEP_MDM specific bits */ +/* 2430 only */ + +/* PM_PWSTCTRL_MDM specific bits */ +/* 2430 only */ +#define OMAP2430_KILLDOMAINWKUP (1 << 19) + +/* PM_PWSTST_MDM specific bits */ +/* 2430 only */ + +/* PRCM_IRQSTATUS_IVA */ +/* 2420 only */ + +/* PRCM_IRQENABLE_IVA */ +/* 2420 only */ + +#endif diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h new file mode 100644 index 000000000000..b4686bc345ca --- /dev/null +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -0,0 +1,582 @@ +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H + +/* + * OMAP3430 Power/Reset Management register bits + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "prm.h" + +/* Shared register bits */ + +/* PRM_VC_CMD_VAL_0, PRM_VC_CMD_VAL_1 shared bits */ +#define OMAP3430_ON_SHIFT 24 +#define OMAP3430_ON_MASK (0xff << 24) +#define OMAP3430_ONLP_SHIFT 16 +#define OMAP3430_ONLP_MASK (0xff << 16) +#define OMAP3430_RET_SHIFT 8 +#define OMAP3430_RET_MASK (0xff << 8) +#define OMAP3430_OFF_SHIFT 0 +#define OMAP3430_OFF_MASK (0xff << 0) + +/* PRM_VP1_CONFIG, PRM_VP2_CONFIG shared bits */ +#define OMAP3430_ERROROFFSET_SHIFT 24 +#define OMAP3430_ERROROFFSET_MASK (0xff << 24) +#define OMAP3430_ERRORGAIN_SHIFT 16 +#define OMAP3430_ERRORGAIN_MASK (0xff << 16) +#define OMAP3430_INITVOLTAGE_SHIFT 8 +#define OMAP3430_INITVOLTAGE_MASK (0xff << 8) +#define OMAP3430_TIMEOUTEN (1 << 3) +#define OMAP3430_INITVDD (1 << 2) +#define OMAP3430_FORCEUPDATE (1 << 1) +#define OMAP3430_VPENABLE (1 << 0) + +/* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */ +#define OMAP3430_SMPSWAITTIMEMIN_SHIFT 8 +#define OMAP3430_SMPSWAITTIMEMIN_MASK (0xffff << 8) +#define OMAP3430_VSTEPMIN_SHIFT 0 +#define OMAP3430_VSTEPMIN_MASK (0xff << 0) + +/* PRM_VP1_VSTEPMAX, PRM_VP2_VSTEPMAX shared bits */ +#define OMAP3430_SMPSWAITTIMEMAX_SHIFT 8 +#define OMAP3430_SMPSWAITTIMEMAX_MASK (0xffff << 8) +#define OMAP3430_VSTEPMAX_SHIFT 0 +#define OMAP3430_VSTEPMAX_MASK (0xff << 0) + +/* PRM_VP1_VLIMITTO, PRM_VP2_VLIMITTO shared bits */ +#define OMAP3430_VDDMAX_SHIFT 24 +#define OMAP3430_VDDMAX_MASK (0xff << 24) +#define OMAP3430_VDDMIN_SHIFT 16 +#define OMAP3430_VDDMIN_MASK (0xff << 16) +#define OMAP3430_TIMEOUT_SHIFT 0 +#define OMAP3430_TIMEOUT_MASK (0xffff << 0) + +/* PRM_VP1_VOLTAGE, PRM_VP2_VOLTAGE shared bits */ +#define OMAP3430_VPVOLTAGE_SHIFT 0 +#define OMAP3430_VPVOLTAGE_MASK (0xff << 0) + +/* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */ +#define OMAP3430_VPINIDLE (1 << 0) + +/* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */ +#define OMAP3430_EN_PER (1 << 7) + +/* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */ +#define OMAP3430_MEMORYCHANGE (1 << 3) + +/* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */ +#define OMAP3430_LOGICSTATEST (1 << 2) + +/* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */ +#define OMAP3430_LASTLOGICSTATEENTERED (1 << 2) + +/* + * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE, + * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM, + * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits + */ +#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT 0 +#define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0) + +/* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */ +#define OMAP3430_WKUP_ST (1 << 0) + +/* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */ +#define OMAP3430_WKUP_EN (1 << 0) + +/* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */ +#define OMAP3430_GRPSEL_MMC2 (1 << 25) +#define OMAP3430_GRPSEL_MMC1 (1 << 24) +#define OMAP3430_GRPSEL_MCSPI4 (1 << 21) +#define OMAP3430_GRPSEL_MCSPI3 (1 << 20) +#define OMAP3430_GRPSEL_MCSPI2 (1 << 19) +#define OMAP3430_GRPSEL_MCSPI1 (1 << 18) +#define OMAP3430_GRPSEL_I2C3 (1 << 17) +#define OMAP3430_GRPSEL_I2C2 (1 << 16) +#define OMAP3430_GRPSEL_I2C1 (1 << 15) +#define OMAP3430_GRPSEL_UART2 (1 << 14) +#define OMAP3430_GRPSEL_UART1 (1 << 13) +#define OMAP3430_GRPSEL_GPT11 (1 << 12) +#define OMAP3430_GRPSEL_GPT10 (1 << 11) +#define OMAP3430_GRPSEL_MCBSP5 (1 << 10) +#define OMAP3430_GRPSEL_MCBSP1 (1 << 9) +#define OMAP3430_GRPSEL_HSOTGUSB (1 << 4) +#define OMAP3430_GRPSEL_D2D (1 << 3) + +/* + * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, + * PM_PWSTCTRL_PER shared bits + */ +#define OMAP3430_MEMONSTATE_SHIFT 16 +#define OMAP3430_MEMONSTATE_MASK (0x3 << 16) +#define OMAP3430_MEMRETSTATE (1 << 8) + +/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */ +#define OMAP3430_GRPSEL_GPIO6 (1 << 17) +#define OMAP3430_GRPSEL_GPIO5 (1 << 16) +#define OMAP3430_GRPSEL_GPIO4 (1 << 15) +#define OMAP3430_GRPSEL_GPIO3 (1 << 14) +#define OMAP3430_GRPSEL_GPIO2 (1 << 13) +#define OMAP3430_GRPSEL_UART3 (1 << 11) +#define OMAP3430_GRPSEL_GPT9 (1 << 10) +#define OMAP3430_GRPSEL_GPT8 (1 << 9) +#define OMAP3430_GRPSEL_GPT7 (1 << 8) +#define OMAP3430_GRPSEL_GPT6 (1 << 7) +#define OMAP3430_GRPSEL_GPT5 (1 << 6) +#define OMAP3430_GRPSEL_GPT4 (1 << 5) +#define OMAP3430_GRPSEL_GPT3 (1 << 4) +#define OMAP3430_GRPSEL_GPT2 (1 << 3) +#define OMAP3430_GRPSEL_MCBSP4 (1 << 2) +#define OMAP3430_GRPSEL_MCBSP3 (1 << 1) +#define OMAP3430_GRPSEL_MCBSP2 (1 << 0) + +/* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */ +#define OMAP3430_GRPSEL_IO (1 << 8) +#define OMAP3430_GRPSEL_SR2 (1 << 7) +#define OMAP3430_GRPSEL_SR1 (1 << 6) +#define OMAP3430_GRPSEL_GPIO1 (1 << 3) +#define OMAP3430_GRPSEL_GPT12 (1 << 1) +#define OMAP3430_GRPSEL_GPT1 (1 << 0) + +/* Bits specific to each register */ + +/* RM_RSTCTRL_IVA2 */ +#define OMAP3430_RST3_IVA2 (1 << 2) +#define OMAP3430_RST2_IVA2 (1 << 1) +#define OMAP3430_RST1_IVA2 (1 << 0) + +/* RM_RSTST_IVA2 specific bits */ +#define OMAP3430_EMULATION_VSEQ_RST (1 << 13) +#define OMAP3430_EMULATION_VHWA_RST (1 << 12) +#define OMAP3430_EMULATION_IVA2_RST (1 << 11) +#define OMAP3430_IVA2_SW_RST3 (1 << 10) +#define OMAP3430_IVA2_SW_RST2 (1 << 9) +#define OMAP3430_IVA2_SW_RST1 (1 << 8) + +/* PM_WKDEP_IVA2 specific bits */ + +/* PM_PWSTCTRL_IVA2 specific bits */ +#define OMAP3430_L2FLATMEMONSTATE_SHIFT 22 +#define OMAP3430_L2FLATMEMONSTATE_MASK (0x3 << 22) +#define OMAP3430_SHAREDL2CACHEFLATONSTATE_SHIFT 20 +#define OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK (0x3 << 20) +#define OMAP3430_L1FLATMEMONSTATE_SHIFT 18 +#define OMAP3430_L1FLATMEMONSTATE_MASK (0x3 << 18) +#define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT 16 +#define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK (0x3 << 16) +#define OMAP3430_L2FLATMEMRETSTATE (1 << 11) +#define OMAP3430_SHAREDL2CACHEFLATRETSTATE (1 << 10) +#define OMAP3430_L1FLATMEMRETSTATE (1 << 9) +#define OMAP3430_SHAREDL1CACHEFLATRETSTATE (1 << 8) + +/* PM_PWSTST_IVA2 specific bits */ +#define OMAP3430_L2FLATMEMSTATEST_SHIFT 10 +#define OMAP3430_L2FLATMEMSTATEST_MASK (0x3 << 10) +#define OMAP3430_SHAREDL2CACHEFLATSTATEST_SHIFT 8 +#define OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK (0x3 << 8) +#define OMAP3430_L1FLATMEMSTATEST_SHIFT 6 +#define OMAP3430_L1FLATMEMSTATEST_MASK (0x3 << 6) +#define OMAP3430_SHAREDL1CACHEFLATSTATEST_SHIFT 4 +#define OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK (0x3 << 4) + +/* PM_PREPWSTST_IVA2 specific bits */ +#define OMAP3430_LASTL2FLATMEMSTATEENTERED_SHIFT 10 +#define OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK (0x3 << 10) +#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_SHIFT 8 +#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK (0x3 << 8) +#define OMAP3430_LASTL1FLATMEMSTATEENTERED_SHIFT 6 +#define OMAP3430_LASTL1FLATMEMSTATEENTERED_MASK (0x3 << 6) +#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_SHIFT 4 +#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK (0x3 << 4) + +/* PRM_IRQSTATUS_IVA2 specific bits */ +#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST (1 << 2) +#define OMAP3430_FORCEWKUP_ST (1 << 1) + +/* PRM_IRQENABLE_IVA2 specific bits */ +#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN (1 << 2) +#define OMAP3430_FORCEWKUP_EN (1 << 1) + +/* PRM_REVISION specific bits */ + +/* PRM_SYSCONFIG specific bits */ + +/* PRM_IRQSTATUS_MPU specific bits */ +#define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT 25 +#define OMAP3430ES2_SND_PERIPH_DPLL_ST (1 << 25) +#define OMAP3430_VC_TIMEOUTERR_ST (1 << 24) +#define OMAP3430_VC_RAERR_ST (1 << 23) +#define OMAP3430_VC_SAERR_ST (1 << 22) +#define OMAP3430_VP2_TRANXDONE_ST (1 << 21) +#define OMAP3430_VP2_EQVALUE_ST (1 << 20) +#define OMAP3430_VP2_NOSMPSACK_ST (1 << 19) +#define OMAP3430_VP2_MAXVDD_ST (1 << 18) +#define OMAP3430_VP2_MINVDD_ST (1 << 17) +#define OMAP3430_VP2_OPPCHANGEDONE_ST (1 << 16) +#define OMAP3430_VP1_TRANXDONE_ST (1 << 15) +#define OMAP3430_VP1_EQVALUE_ST (1 << 14) +#define OMAP3430_VP1_NOSMPSACK_ST (1 << 13) +#define OMAP3430_VP1_MAXVDD_ST (1 << 12) +#define OMAP3430_VP1_MINVDD_ST (1 << 11) +#define OMAP3430_VP1_OPPCHANGEDONE_ST (1 << 10) +#define OMAP3430_IO_ST (1 << 9) +#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST (1 << 8) +#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT 8 +#define OMAP3430_MPU_DPLL_ST (1 << 7) +#define OMAP3430_MPU_DPLL_ST_SHIFT 7 +#define OMAP3430_PERIPH_DPLL_ST (1 << 6) +#define OMAP3430_PERIPH_DPLL_ST_SHIFT 6 +#define OMAP3430_CORE_DPLL_ST (1 << 5) +#define OMAP3430_CORE_DPLL_ST_SHIFT 5 +#define OMAP3430_TRANSITION_ST (1 << 4) +#define OMAP3430_EVGENOFF_ST (1 << 3) +#define OMAP3430_EVGENON_ST (1 << 2) +#define OMAP3430_FS_USB_WKUP_ST (1 << 1) + +/* PRM_IRQENABLE_MPU specific bits */ +#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT 25 +#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN (1 << 25) +#define OMAP3430_VC_TIMEOUTERR_EN (1 << 24) +#define OMAP3430_VC_RAERR_EN (1 << 23) +#define OMAP3430_VC_SAERR_EN (1 << 22) +#define OMAP3430_VP2_TRANXDONE_EN (1 << 21) +#define OMAP3430_VP2_EQVALUE_EN (1 << 20) +#define OMAP3430_VP2_NOSMPSACK_EN (1 << 19) +#define OMAP3430_VP2_MAXVDD_EN (1 << 18) +#define OMAP3430_VP2_MINVDD_EN (1 << 17) +#define OMAP3430_VP2_OPPCHANGEDONE_EN (1 << 16) +#define OMAP3430_VP1_TRANXDONE_EN (1 << 15) +#define OMAP3430_VP1_EQVALUE_EN (1 << 14) +#define OMAP3430_VP1_NOSMPSACK_EN (1 << 13) +#define OMAP3430_VP1_MAXVDD_EN (1 << 12) +#define OMAP3430_VP1_MINVDD_EN (1 << 11) +#define OMAP3430_VP1_OPPCHANGEDONE_EN (1 << 10) +#define OMAP3430_IO_EN (1 << 9) +#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN (1 << 8) +#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT 8 +#define OMAP3430_MPU_DPLL_RECAL_EN (1 << 7) +#define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT 7 +#define OMAP3430_PERIPH_DPLL_RECAL_EN (1 << 6) +#define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT 6 +#define OMAP3430_CORE_DPLL_RECAL_EN (1 << 5) +#define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT 5 +#define OMAP3430_TRANSITION_EN (1 << 4) +#define OMAP3430_EVGENOFF_EN (1 << 3) +#define OMAP3430_EVGENON_EN (1 << 2) +#define OMAP3430_FS_USB_WKUP_EN (1 << 1) + +/* RM_RSTST_MPU specific bits */ +#define OMAP3430_EMULATION_MPU_RST (1 << 11) + +/* PM_WKDEP_MPU specific bits */ +#define OMAP3430_PM_WKDEP_MPU_EN_DSS (1 << 5) +#define OMAP3430_PM_WKDEP_MPU_EN_IVA2 (1 << 2) + +/* PM_EVGENCTRL_MPU */ +#define OMAP3430_OFFLOADMODE_SHIFT 3 +#define OMAP3430_OFFLOADMODE_MASK (0x3 << 3) +#define OMAP3430_ONLOADMODE_SHIFT 1 +#define OMAP3430_ONLOADMODE_MASK (0x3 << 1) +#define OMAP3430_ENABLE (1 << 0) + +/* PM_EVGENONTIM_MPU */ +#define OMAP3430_ONTIMEVAL_SHIFT 0 +#define OMAP3430_ONTIMEVAL_MASK (0xffffffff << 0) + +/* PM_EVGENOFFTIM_MPU */ +#define OMAP3430_OFFTIMEVAL_SHIFT 0 +#define OMAP3430_OFFTIMEVAL_MASK (0xffffffff << 0) + +/* PM_PWSTCTRL_MPU specific bits */ +#define OMAP3430_L2CACHEONSTATE_SHIFT 16 +#define OMAP3430_L2CACHEONSTATE_MASK (0x3 << 16) +#define OMAP3430_L2CACHERETSTATE (1 << 8) +#define OMAP3430_LOGICL1CACHERETSTATE (1 << 2) + +/* PM_PWSTST_MPU specific bits */ +#define OMAP3430_L2CACHESTATEST_SHIFT 6 +#define OMAP3430_L2CACHESTATEST_MASK (0x3 << 6) +#define OMAP3430_LOGICL1CACHESTATEST (1 << 2) + +/* PM_PREPWSTST_MPU specific bits */ +#define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT 6 +#define OMAP3430_LASTL2CACHESTATEENTERED_MASK (0x3 << 6) +#define OMAP3430_LASTLOGICL1CACHESTATEENTERED (1 << 2) + +/* RM_RSTCTRL_CORE */ +#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON (1 << 1) +#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST (1 << 0) + +/* RM_RSTST_CORE specific bits */ +#define OMAP3430_MODEM_SECURITY_VIOL_RST (1 << 10) +#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON (1 << 9) +#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST (1 << 8) + +/* PM_WKEN1_CORE specific bits */ + +/* PM_MPUGRPSEL1_CORE specific bits */ +#define OMAP3430_GRPSEL_FSHOSTUSB (1 << 5) + +/* PM_IVA2GRPSEL1_CORE specific bits */ + +/* PM_WKST1_CORE specific bits */ + +/* PM_PWSTCTRL_CORE specific bits */ +#define OMAP3430_MEM2ONSTATE_SHIFT 18 +#define OMAP3430_MEM2ONSTATE_MASK (0x3 << 18) +#define OMAP3430_MEM1ONSTATE_SHIFT 16 +#define OMAP3430_MEM1ONSTATE_MASK (0x3 << 16) +#define OMAP3430_MEM2RETSTATE (1 << 9) +#define OMAP3430_MEM1RETSTATE (1 << 8) + +/* PM_PWSTST_CORE specific bits */ +#define OMAP3430_MEM2STATEST_SHIFT 6 +#define OMAP3430_MEM2STATEST_MASK (0x3 << 6) +#define OMAP3430_MEM1STATEST_SHIFT 4 +#define OMAP3430_MEM1STATEST_MASK (0x3 << 4) + +/* PM_PREPWSTST_CORE specific bits */ +#define OMAP3430_LASTMEM2STATEENTERED_SHIFT 6 +#define OMAP3430_LASTMEM2STATEENTERED_MASK (0x3 << 6) +#define OMAP3430_LASTMEM1STATEENTERED_SHIFT 4 +#define OMAP3430_LASTMEM1STATEENTERED_MASK (0x3 << 4) + +/* RM_RSTST_GFX specific bits */ + +/* PM_WKDEP_GFX specific bits */ +#define OMAP3430_PM_WKDEP_GFX_EN_IVA2 (1 << 2) + +/* PM_PWSTCTRL_GFX specific bits */ + +/* PM_PWSTST_GFX specific bits */ + +/* PM_PREPWSTST_GFX specific bits */ + +/* PM_WKEN_WKUP specific bits */ +#define OMAP3430_EN_IO (1 << 8) + +/* PM_MPUGRPSEL_WKUP specific bits */ + +/* PM_IVA2GRPSEL_WKUP specific bits */ + +/* PM_WKST_WKUP specific bits */ +#define OMAP3430_ST_IO (1 << 8) + +/* PRM_CLKSEL */ +#define OMAP3430_SYS_CLKIN_SEL_SHIFT 0 +#define OMAP3430_SYS_CLKIN_SEL_MASK (0x7 << 0) + +/* PRM_CLKOUT_CTRL */ +#define OMAP3430_CLKOUT_EN (1 << 7) +#define OMAP3430_CLKOUT_EN_SHIFT 7 + +/* RM_RSTST_DSS specific bits */ + +/* PM_WKEN_DSS */ +#define OMAP3430_PM_WKEN_DSS_EN_DSS (1 << 0) + +/* PM_WKDEP_DSS specific bits */ +#define OMAP3430_PM_WKDEP_DSS_EN_IVA2 (1 << 2) + +/* PM_PWSTCTRL_DSS specific bits */ + +/* PM_PWSTST_DSS specific bits */ + +/* PM_PREPWSTST_DSS specific bits */ + +/* RM_RSTST_CAM specific bits */ + +/* PM_WKDEP_CAM specific bits */ +#define OMAP3430_PM_WKDEP_CAM_EN_IVA2 (1 << 2) + +/* PM_PWSTCTRL_CAM specific bits */ + +/* PM_PWSTST_CAM specific bits */ + +/* PM_PREPWSTST_CAM specific bits */ + +/* PM_PWSTCTRL_USBHOST specific bits */ +#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4) + +/* RM_RSTST_PER specific bits */ + +/* PM_WKEN_PER specific bits */ + +/* PM_MPUGRPSEL_PER specific bits */ + +/* PM_IVA2GRPSEL_PER specific bits */ + +/* PM_WKST_PER specific bits */ + +/* PM_WKDEP_PER specific bits */ +#define OMAP3430_PM_WKDEP_PER_EN_IVA2 (1 << 2) + +/* PM_PWSTCTRL_PER specific bits */ + +/* PM_PWSTST_PER specific bits */ + +/* PM_PREPWSTST_PER specific bits */ + +/* RM_RSTST_EMU specific bits */ + +/* PM_PWSTST_EMU specific bits */ + +/* PRM_VC_SMPS_SA */ +#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT 16 +#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK (0x7f << 16) +#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT 0 +#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK (0x7f << 0) + +/* PRM_VC_SMPS_VOL_RA */ +#define OMAP3430_VOLRA1_SHIFT 16 +#define OMAP3430_VOLRA1_MASK (0xff << 16) +#define OMAP3430_VOLRA0_SHIFT 0 +#define OMAP3430_VOLRA0_MASK (0xff << 0) + +/* PRM_VC_SMPS_CMD_RA */ +#define OMAP3430_CMDRA1_SHIFT 16 +#define OMAP3430_CMDRA1_MASK (0xff << 16) +#define OMAP3430_CMDRA0_SHIFT 0 +#define OMAP3430_CMDRA0_MASK (0xff << 0) + +/* PRM_VC_CMD_VAL_0 specific bits */ + +/* PRM_VC_CMD_VAL_1 specific bits */ + +/* PRM_VC_CH_CONF */ +#define OMAP3430_CMD1 (1 << 20) +#define OMAP3430_RACEN1 (1 << 19) +#define OMAP3430_RAC1 (1 << 18) +#define OMAP3430_RAV1 (1 << 17) +#define OMAP3430_PRM_VC_CH_CONF_SA1 (1 << 16) +#define OMAP3430_CMD0 (1 << 4) +#define OMAP3430_RACEN0 (1 << 3) +#define OMAP3430_RAC0 (1 << 2) +#define OMAP3430_RAV0 (1 << 1) +#define OMAP3430_PRM_VC_CH_CONF_SA0 (1 << 0) + +/* PRM_VC_I2C_CFG */ +#define OMAP3430_HSMASTER (1 << 5) +#define OMAP3430_SREN (1 << 4) +#define OMAP3430_HSEN (1 << 3) +#define OMAP3430_MCODE_SHIFT 0 +#define OMAP3430_MCODE_MASK (0x7 << 0) + +/* PRM_VC_BYPASS_VAL */ +#define OMAP3430_VALID (1 << 24) +#define OMAP3430_DATA_SHIFT 16 +#define OMAP3430_DATA_MASK (0xff << 16) +#define OMAP3430_REGADDR_SHIFT 8 +#define OMAP3430_REGADDR_MASK (0xff << 8) +#define OMAP3430_SLAVEADDR_SHIFT 0 +#define OMAP3430_SLAVEADDR_MASK (0x7f << 0) + +/* PRM_RSTCTRL */ +#define OMAP3430_RST_DPLL3 (1 << 2) +#define OMAP3430_RST_GS (1 << 1) + +/* PRM_RSTTIME */ +#define OMAP3430_RSTTIME2_SHIFT 8 +#define OMAP3430_RSTTIME2_MASK (0x1f << 8) +#define OMAP3430_RSTTIME1_SHIFT 0 +#define OMAP3430_RSTTIME1_MASK (0xff << 0) + +/* PRM_RSTST */ +#define OMAP3430_ICECRUSHER_RST (1 << 10) +#define OMAP3430_ICEPICK_RST (1 << 9) +#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST (1 << 8) +#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST (1 << 7) +#define OMAP3430_EXTERNAL_WARM_RST (1 << 6) +#define OMAP3430_SECURE_WD_RST (1 << 5) +#define OMAP3430_MPU_WD_RST (1 << 4) +#define OMAP3430_SECURITY_VIOL_RST (1 << 3) +#define OMAP3430_GLOBAL_SW_RST (1 << 1) +#define OMAP3430_GLOBAL_COLD_RST (1 << 0) + +/* PRM_VOLTCTRL */ +#define OMAP3430_SEL_VMODE (1 << 4) +#define OMAP3430_SEL_OFF (1 << 3) +#define OMAP3430_AUTO_OFF (1 << 2) +#define OMAP3430_AUTO_RET (1 << 1) +#define OMAP3430_AUTO_SLEEP (1 << 0) + +/* PRM_SRAM_PCHARGE */ +#define OMAP3430_PCHARGE_TIME_SHIFT 0 +#define OMAP3430_PCHARGE_TIME_MASK (0xff << 0) + +/* PRM_CLKSRC_CTRL */ +#define OMAP3430_SYSCLKDIV_SHIFT 6 +#define OMAP3430_SYSCLKDIV_MASK (0x3 << 6) +#define OMAP3430_AUTOEXTCLKMODE_SHIFT 3 +#define OMAP3430_AUTOEXTCLKMODE_MASK (0x3 << 3) +#define OMAP3430_SYSCLKSEL_SHIFT 0 +#define OMAP3430_SYSCLKSEL_MASK (0x3 << 0) + +/* PRM_VOLTSETUP1 */ +#define OMAP3430_SETUP_TIME2_SHIFT 16 +#define OMAP3430_SETUP_TIME2_MASK (0xffff << 16) +#define OMAP3430_SETUP_TIME1_SHIFT 0 +#define OMAP3430_SETUP_TIME1_MASK (0xffff << 0) + +/* PRM_VOLTOFFSET */ +#define OMAP3430_OFFSET_TIME_SHIFT 0 +#define OMAP3430_OFFSET_TIME_MASK (0xffff << 0) + +/* PRM_CLKSETUP */ +#define OMAP3430_SETUP_TIME_SHIFT 0 +#define OMAP3430_SETUP_TIME_MASK (0xffff << 0) + +/* PRM_POLCTRL */ +#define OMAP3430_OFFMODE_POL (1 << 3) +#define OMAP3430_CLKOUT_POL (1 << 2) +#define OMAP3430_CLKREQ_POL (1 << 1) +#define OMAP3430_EXTVOL_POL (1 << 0) + +/* PRM_VOLTSETUP2 */ +#define OMAP3430_OFFMODESETUPTIME_SHIFT 0 +#define OMAP3430_OFFMODESETUPTIME_MASK (0xffff << 0) + +/* PRM_VP1_CONFIG specific bits */ + +/* PRM_VP1_VSTEPMIN specific bits */ + +/* PRM_VP1_VSTEPMAX specific bits */ + +/* PRM_VP1_VLIMITTO specific bits */ + +/* PRM_VP1_VOLTAGE specific bits */ + +/* PRM_VP1_STATUS specific bits */ + +/* PRM_VP2_CONFIG specific bits */ + +/* PRM_VP2_VSTEPMIN specific bits */ + +/* PRM_VP2_VSTEPMAX specific bits */ + +/* PRM_VP2_VLIMITTO specific bits */ + +/* PRM_VP2_VOLTAGE specific bits */ + +/* PRM_VP2_STATUS specific bits */ + +/* RM_RSTST_NEON specific bits */ + +/* PM_WKDEP_NEON specific bits */ + +/* PM_PWSTCTRL_NEON specific bits */ + +/* PM_PWSTST_NEON specific bits */ + +/* PM_PREPWSTST_NEON specific bits */ + +#endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h new file mode 100644 index 000000000000..618f8111658a --- /dev/null +++ b/arch/arm/mach-omap2/prm.h @@ -0,0 +1,316 @@ +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H +#define __ARCH_ARM_MACH_OMAP2_PRM_H + +/* + * OMAP2/3 Power/Reset Management (PRM) register definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "prcm-common.h" + +#ifndef __ASSEMBLER__ +#define OMAP_PRM_REGADDR(module, reg) \ + (void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg)) +#else +#define OMAP2420_PRM_REGADDR(module, reg) \ + IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) +#define OMAP2430_PRM_REGADDR(module, reg) \ + IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) +#define OMAP34XX_PRM_REGADDR(module, reg) \ + IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) +#endif + +/* + * Architecture-specific global PRM registers + * Use __raw_{read,write}l() with these registers. + * + * With a few exceptions, these are the register names beginning with + * PRCM_* on 24xx, and PRM_* on 34xx. (The exceptions are the + * IRQSTATUS and IRQENABLE bits.) + * + */ + +#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP24XX_PRCM_VOLTCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP24XX_PRCM_CLKCFG_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP24XX_PRCM_CLKCFG_STATUS OMAP_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP24XX_PRCM_VOLTSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP24XX_PRCM_CLKSSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP24XX_PRCM_POLCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0098) + +#define OMAP3430_PRM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0004) +#define OMAP3430_PRM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0014) + +#define OMAP3430_PRM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP3430_PRM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c) + + +#define OMAP3430_PRM_VC_SMPS_SA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) +#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) +#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) +#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) +#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) +#define OMAP3430_PRM_VC_CH_CONF OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) +#define OMAP3430_PRM_VC_I2C_CFG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) +#define OMAP3430_PRM_VC_BYPASS_VAL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) +#define OMAP3430_PRM_RSTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) +#define OMAP3430_PRM_RSTTIME OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) +#define OMAP3430_PRM_RSTST OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) +#define OMAP3430_PRM_VOLTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) +#define OMAP3430_PRM_SRAM_PCHARGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) +#define OMAP3430_PRM_CLKSRC_CTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) +#define OMAP3430_PRM_VOLTSETUP1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) +#define OMAP3430_PRM_VOLTOFFSET OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) +#define OMAP3430_PRM_CLKSETUP OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) +#define OMAP3430_PRM_POLCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) +#define OMAP3430_PRM_VOLTSETUP2 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) +#define OMAP3430_PRM_VP1_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) +#define OMAP3430_PRM_VP1_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) +#define OMAP3430_PRM_VP1_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) +#define OMAP3430_PRM_VP1_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) +#define OMAP3430_PRM_VP1_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) +#define OMAP3430_PRM_VP1_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) +#define OMAP3430_PRM_VP2_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) +#define OMAP3430_PRM_VP2_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) +#define OMAP3430_PRM_VP2_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) +#define OMAP3430_PRM_VP2_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) +#define OMAP3430_PRM_VP2_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) +#define OMAP3430_PRM_VP2_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) + +#define OMAP3430_PRM_CLKSEL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) +#define OMAP3430_PRM_CLKOUT_CTRL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) + +/* + * Module specific PRM registers from PRM_BASE + domain offset + * + * Use prm_{read,write}_mod_reg() with these registers. + * + * With a few exceptions, these are the register names beginning with + * {PM,RM}_* on both architectures. (The exceptions are the IRQSTATUS + * and IRQENABLE bits.) + * + */ + +/* Registers appearing on both 24xx and 34xx */ + +#define RM_RSTCTRL 0x0050 +#define RM_RSTTIME 0x0054 +#define RM_RSTST 0x0058 + +#define PM_WKEN 0x00a0 +#define PM_WKEN1 PM_WKEN +#define PM_WKST 0x00b0 +#define PM_WKST1 PM_WKST +#define PM_WKDEP 0x00c8 +#define PM_EVGENCTRL 0x00d4 +#define PM_EVGENONTIM 0x00d8 +#define PM_EVGENOFFTIM 0x00dc +#define PM_PWSTCTRL 0x00e0 +#define PM_PWSTST 0x00e4 + +#define OMAP3430_PM_MPUGRPSEL 0x00a4 +#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL + +#define OMAP3430_PM_IVAGRPSEL 0x00a8 +#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL + +#define OMAP3430_PM_PREPWSTST 0x00e8 + +#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8 +#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc + + +/* Architecture-specific registers */ + +#define OMAP24XX_PM_WKEN2 0x00a4 +#define OMAP24XX_PM_WKST2 0x00b4 + +#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ +#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ +#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 +#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc + +#ifndef __ASSEMBLER__ + +/* Power/reset management domain register get/set */ + +static inline void prm_write_mod_reg(u32 val, s16 module, s16 idx) +{ + __raw_writel(val, OMAP_PRM_REGADDR(module, idx)); +} + +static inline u32 prm_read_mod_reg(s16 module, s16 idx) +{ + return __raw_readl(OMAP_PRM_REGADDR(module, idx)); +} + +#endif + +/* + * Bits common to specific registers + * + * The 3430 register and bit names are generally used, + * since they tend to make more sense + */ + +/* PM_EVGENONTIM_MPU */ +/* Named PM_EVEGENONTIM_MPU on the 24XX */ +#define OMAP_ONTIMEVAL_SHIFT 0 +#define OMAP_ONTIMEVAL_MASK (0xffffffff << 0) + +/* PM_EVGENOFFTIM_MPU */ +/* Named PM_EVEGENOFFTIM_MPU on the 24XX */ +#define OMAP_OFFTIMEVAL_SHIFT 0 +#define OMAP_OFFTIMEVAL_MASK (0xffffffff << 0) + +/* PRM_CLKSETUP and PRCM_VOLTSETUP */ +/* Named PRCM_CLKSSETUP on the 24XX */ +#define OMAP_SETUP_TIME_SHIFT 0 +#define OMAP_SETUP_TIME_MASK (0xffff << 0) + +/* PRM_CLKSRC_CTRL */ +/* Named PRCM_CLKSRC_CTRL on the 24XX */ +#define OMAP_SYSCLKDIV_SHIFT 6 +#define OMAP_SYSCLKDIV_MASK (0x3 << 6) +#define OMAP_AUTOEXTCLKMODE_SHIFT 3 +#define OMAP_AUTOEXTCLKMODE_MASK (0x3 << 3) +#define OMAP_SYSCLKSEL_SHIFT 0 +#define OMAP_SYSCLKSEL_MASK (0x3 << 0) + +/* PM_EVGENCTRL_MPU */ +#define OMAP_OFFLOADMODE_SHIFT 3 +#define OMAP_OFFLOADMODE_MASK (0x3 << 3) +#define OMAP_ONLOADMODE_SHIFT 1 +#define OMAP_ONLOADMODE_MASK (0x3 << 1) +#define OMAP_ENABLE (1 << 0) + +/* PRM_RSTTIME */ +/* Named RM_RSTTIME_WKUP on the 24xx */ +#define OMAP_RSTTIME2_SHIFT 8 +#define OMAP_RSTTIME2_MASK (0x1f << 8) +#define OMAP_RSTTIME1_SHIFT 0 +#define OMAP_RSTTIME1_MASK (0xff << 0) + + +/* PRM_RSTCTRL */ +/* Named RM_RSTCTRL_WKUP on the 24xx */ +/* 2420 calls RST_DPLL3 'RST_DPLL' */ +#define OMAP_RST_DPLL3 (1 << 2) +#define OMAP_RST_GS (1 << 1) + + +/* + * Bits common to module-shared registers + * + * Not all registers of a particular type support all of these bits - + * check TRM if you are unsure + */ + +/* + * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP + * + * 2430: PM_PWSTST_MDM + * + * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX, + * PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU, + * PM_PWSTST_NEON + */ +#define OMAP_INTRANSITION (1 << 20) + + +/* + * 24XX: PM_PWSTST_GFX, PM_PWSTST_DSP + * + * 2430: PM_PWSTST_MDM + * + * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX, + * PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU, + * PM_PWSTST_NEON + */ +#define OMAP_POWERSTATEST_SHIFT 0 +#define OMAP_POWERSTATEST_MASK (0x3 << 0) + +/* + * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is + * called 'COREWKUP_RST' + * + * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS, + * RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON + */ +#define OMAP_COREDOMAINWKUP_RST (1 << 3) + +/* + * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP + * + * 2430: RM_RSTST_MDM + * + * 3430: RM_RSTST_CORE, RM_RSTST_EMU + */ +#define OMAP_DOMAINWKUP_RST (1 << 2) + +/* + * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP + * On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'. + * + * 2430: RM_RSTST_MDM + * + * 3430: RM_RSTST_CORE, RM_RSTST_EMU + */ +#define OMAP_GLOBALWARM_RST (1 << 1) +#define OMAP_GLOBALCOLD_RST (1 << 0) + +/* + * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP + * 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP" + * + * 2430: PM_WKDEP_MDM + * + * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM, + * PM_WKDEP_PER + */ +#define OMAP_EN_WKUP (1 << 4) + +/* + * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, + * PM_PWSTCTRL_DSP + * + * 2430: PM_PWSTCTRL_MDM + * + * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, + * PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER, + * PM_PWSTCTRL_NEON + */ +#define OMAP_LOGICRETSTATE (1 << 2) + +/* + * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, + * PM_PWSTCTRL_DSP, PM_PWSTST_MPU + * + * 2430: PM_PWSTCTRL_MDM shared bits + * + * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, + * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER, + * PM_PWSTCTRL_NEON shared bits + */ +#define OMAP_POWERSTATE_SHIFT 0 +#define OMAP_POWERSTATE_MASK (0x3 << 0) + + +#endif diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h new file mode 100644 index 000000000000..d7f23bc9550a --- /dev/null +++ b/arch/arm/mach-omap2/sdrc.h @@ -0,0 +1,58 @@ +#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H +#define __ARCH_ARM_MACH_OMAP2_SDRC_H + +/* + * OMAP2 SDRC register definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG + +#include <asm/arch/sdrc.h> + +#ifndef __ASSEMBLER__ +extern unsigned long omap2_sdrc_base; +extern unsigned long omap2_sms_base; + +#define OMAP_SDRC_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(omap2_sdrc_base + (reg)) +#define OMAP_SMS_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(omap2_sms_base + (reg)) + +/* SDRC global register get/set */ + +static inline void sdrc_write_reg(u32 val, u16 reg) +{ + __raw_writel(val, OMAP_SDRC_REGADDR(reg)); +} + +static inline u32 sdrc_read_reg(u16 reg) +{ + return __raw_readl(OMAP_SDRC_REGADDR(reg)); +} + +/* SMS global register get/set */ + +static inline void sms_write_reg(u32 val, u16 reg) +{ + __raw_writel(val, OMAP_SMS_REGADDR(reg)); +} + +static inline u32 sms_read_reg(u16 reg) +{ + return __raw_readl(OMAP_SMS_REGADDR(reg)); +} +#else +#define OMAP242X_SDRC_REGADDR(reg) IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) +#define OMAP243X_SDRC_REGADDR(reg) IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) +#define OMAP34XX_SDRC_REGADDR(reg) IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) +#endif /* __ASSEMBLER__ */ + +#endif diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S index 16247d557853..46ccb9b8b583 100644 --- a/arch/arm/mach-omap2/sleep.S +++ b/arch/arm/mach-omap2/sleep.S @@ -26,19 +26,10 @@ #include <asm/arch/io.h> #include <asm/arch/pm.h> -#define A_32KSYNC_CR_V IO_ADDRESS(OMAP_TIMER32K_BASE+0x10) -#define A_PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x50) -#define A_PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x80) -#define A_CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x500) -#define A_CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x520) -#define A_CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x540) -#define A_CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x544) +#include "sdrc.h" -#define A_SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60) -#define A_SDRC_POWER_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70) -#define A_SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4) +/* First address of reserved address space? apparently valid for OMAP2 & 3 */ #define A_SDRC0_V (0xC0000000) -#define A_SDRC_MANUAL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA8) .text @@ -126,17 +117,11 @@ loop2: ldmfd sp!, {r0 - r12, pc} @ restore regs and return A_SDRC_POWER: - .word A_SDRC_POWER_V + .word OMAP242X_SDRC_REGADDR(SDRC_POWER) A_SDRC0: .word A_SDRC0_V -A_CM_CLKSEL2_PLL_S: - .word A_CM_CLKSEL2_PLL_V -A_CM_CLKEN_PLL: - .word A_CM_CLKEN_PLL_V A_SDRC_DLLA_CTRL_S: - .word A_SDRC_DLLA_CTRL_V -A_SDRC_MANUAL_S: - .word A_SDRC_MANUAL_V + .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) ENTRY(omap24xx_cpu_suspend_sz) .word . - omap24xx_cpu_suspend diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S index b27576690f8d..4a9e49140716 100644 --- a/arch/arm/mach-omap2/sram-fn.S +++ b/arch/arm/mach-omap2/sram-fn.S @@ -27,19 +27,11 @@ #include <asm/arch/io.h> #include <asm/hardware.h> -#include "prcm-regs.h" +#include "sdrc.h" +#include "prm.h" +#include "cm.h" -#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010) - -#define CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544) -#define PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050) -#define PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080) -#define CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500) -#define CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520) -#define CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540) - -#define SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060) -#define SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4) +#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) .text @@ -131,11 +123,11 @@ volt_delay: /* relative load constants */ cm_clksel2_pll: - .word CM_CLKSEL2_PLL_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2) sdrc_dlla_ctrl: - .word SDRC_DLLA_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) prcm_voltctrl: - .word PRCM_VOLTCTRL_V + .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50) prcm_mask_val: .word 0xFFFF3FFC timer_32ksynct_cr: @@ -225,13 +217,13 @@ volt_delay_c: mov pc, lr @ back to caller ddr_cm_clksel2_pll: - .word CM_CLKSEL2_PLL_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2) ddr_sdrc_dlla_ctrl: - .word SDRC_DLLA_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) ddr_sdrc_rfr_ctrl: - .word SDRC_RFR_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0) ddr_prcm_voltctrl: - .word PRCM_VOLTCTRL_V + .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50) ddr_prcm_mask_val: .word 0xFFFF3FFC ddr_timer_32ksynct: @@ -316,17 +308,17 @@ wait_dll_lock: ldmfd sp!, {r0-r12, pc} @ restore regs and return set_config: - .word PRCM_CLKCFG_CTRL_V + .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80) pll_ctl: - .word CM_CLKEN_PLL_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1) pll_stat: - .word CM_IDLEST_CKGEN_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1) pll_div: - .word CM_CLKSEL1_PLL_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL) sdrc_rfr: - .word SDRC_RFR_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0) dlla_ctrl: - .word SDRC_DLLA_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) ENTRY(sram_set_prcm_sz) .word . - sram_set_prcm diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 3234deedb946..78d05f203fff 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -3,6 +3,11 @@ * * OMAP2 GP timer support. * + * Update to use new clocksource/clockevent layers + * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Original driver: * Copyright (C) 2005 Nokia Corporation * Author: Paul Mundt <paul.mundt@nokia.com> * Juha Yrjölä <juha.yrjola@nokia.com> @@ -25,24 +30,23 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/irq.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <asm/mach/time.h> #include <asm/arch/dmtimer.h> static struct omap_dm_timer *gptimer; - -static inline void omap2_gp_timer_start(unsigned long load_val) -{ - omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val); - omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); - omap_dm_timer_start(gptimer); -} +static struct clock_event_device clockevent_gpt; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { - omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW); - timer_tick(); + struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id; + struct clock_event_device *evt = &clockevent_gpt; + + omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW); + evt->event_handler(evt); return IRQ_HANDLED; } @@ -52,20 +56,138 @@ static struct irqaction omap2_gp_timer_irq = { .handler = omap2_gp_timer_interrupt, }; -static void __init omap2_gp_timer_init(void) +static int omap2_gp_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) { - u32 tick_period; + omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles); + omap_dm_timer_start(gptimer); + + return 0; +} + +static void omap2_gp_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + u32 period; + + omap_dm_timer_stop(gptimer); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; + period -= 1; + + omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period); + omap_dm_timer_start(gptimer); + break; + case CLOCK_EVT_MODE_ONESHOT: + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device clockevent_gpt = { + .name = "gp timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_next_event = omap2_gp_timer_set_next_event, + .set_mode = omap2_gp_timer_set_mode, +}; + +static void __init omap2_gp_clockevent_init(void) +{ + u32 tick_rate; - omap_dm_timer_init(); gptimer = omap_dm_timer_request_specific(1); BUG_ON(gptimer == NULL); +#if defined(CONFIG_OMAP_32K_TIMER) + omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); +#else omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); - tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; - tick_period -= 1; +#endif + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + omap2_gp_timer_irq.dev_id = (void *)gptimer; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); - omap2_gp_timer_start(tick_period); + omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); + + clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC, + clockevent_gpt.shift); + clockevent_gpt.max_delta_ns = + clockevent_delta2ns(0xffffffff, &clockevent_gpt); + clockevent_gpt.min_delta_ns = + clockevent_delta2ns(1, &clockevent_gpt); + + clockevent_gpt.cpumask = cpumask_of_cpu(0); + clockevents_register_device(&clockevent_gpt); +} + +#ifdef CONFIG_OMAP_32K_TIMER +/* + * When 32k-timer is enabled, don't use GPTimer for clocksource + * instead, just leave default clocksource which uses the 32k + * sync counter. See clocksource setup in see plat-omap/common.c. + */ + +static inline void __init omap2_gp_clocksource_init(void) {} +#else +/* + * clocksource + */ +static struct omap_dm_timer *gpt_clocksource; +static cycle_t clocksource_read_cycles(void) +{ + return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource); +} + +static struct clocksource clocksource_gpt = { + .name = "gp timer", + .rating = 300, + .read = clocksource_read_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 24, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/* Setup free-running counter for clocksource */ +static void __init omap2_gp_clocksource_init(void) +{ + static struct omap_dm_timer *gpt; + u32 tick_rate, tick_period; + static char err1[] __initdata = KERN_ERR + "%s: failed to request dm-timer\n"; + static char err2[] __initdata = KERN_ERR + "%s: can't register clocksource!\n"; + + gpt = omap_dm_timer_request(); + if (!gpt) + printk(err1, clocksource_gpt.name); + gpt_clocksource = gpt; + + omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK); + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt)); + tick_period = (tick_rate / HZ) - 1; + + omap_dm_timer_set_load(gpt, 1, 0); + omap_dm_timer_start(gpt); + + clocksource_gpt.mult = + clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift); + if (clocksource_register(&clocksource_gpt)) + printk(err2, clocksource_gpt.name); +} +#endif + +static void __init omap2_gp_timer_init(void) +{ + omap_dm_timer_init(); + + omap2_gp_clockevent_init(); + omap2_gp_clocksource_init(); } struct sys_timer omap_timer = { diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c deleted file mode 100644 index 58cc3c0333b6..000000000000 --- a/arch/arm/mach-orion/addr-map.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * arch/arm/mach-orion/addr-map.c - * - * Address map functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/hardware.h> -#include "common.h" - -/* - * The Orion has fully programable address map. There's a separate address - * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, - * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own - * address decode windows that allow it to access any of the Orion resources. - * - * CPU address decoding -- - * Linux assumes that it is the boot loader that already setup the access to - * DDR and internal registers. - * Setup access to PCI and PCI-E IO/MEM space is issued by core.c. - * Setup access to various devices located on the device bus interface (e.g. - * flashes, RTC, etc) should be issued by machine-setup.c according to - * specific board population (by using orion_setup_cpu_win()). - * - * Non-CPU Masters address decoding -- - * Unlike the CPU, we setup the access from Orion's master interfaces to DDR - * banks only (the typical use case). - * Setup access for each master to DDR is issued by common.c. - * - * Note: although orion_setbits() and orion_clrbits() are not atomic - * no locking is necessary here since code in this file is only called - * at boot time when there is no concurrency issues. - */ - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DDR 0 -#define TARGET_PCI 3 -#define TARGET_PCIE 4 -#define TARGET_DEV_BUS 1 -#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ - ((n) == 1) ? 0xd : \ - ((n) == 2) ? 0xb : \ - ((n) == 3) ? 0x7 : 0xf) -#define ATTR_PCIE_MEM 0x59 -#define ATTR_PCIE_IO 0x51 -#define ATTR_PCI_MEM 0x59 -#define ATTR_PCI_IO 0x51 -#define ATTR_DEV_CS0 0x1e -#define ATTR_DEV_CS1 0x1d -#define ATTR_DEV_CS2 0x1b -#define ATTR_DEV_BOOT 0xf -#define WIN_EN 1 - -/* - * Helpers to get DDR banks info - */ -#define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8)) -#define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8)) -#define DDR_MAX_CS 4 -#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1) -#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000) -#define DDR_BANK_EN 1 - -/* - * CPU Address Decode Windows registers - */ -#define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4)) -#define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4)) -#define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4)) -#define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4)) -#define CPU_MAX_WIN 8 - -/* - * Use this CPU address decode windows allocation - */ -#define CPU_WIN_PCIE_IO 0 -#define CPU_WIN_PCI_IO 1 -#define CPU_WIN_PCIE_MEM 2 -#define CPU_WIN_PCI_MEM 3 -#define CPU_WIN_DEV_BOOT 4 -#define CPU_WIN_DEV_CS0 5 -#define CPU_WIN_DEV_CS1 6 -#define CPU_WIN_DEV_CS2 7 - -/* - * PCIE Address Decode Windows registers - */ -#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4)) -#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8)) -#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8)) -#define PCIE_WIN_CTRL(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x1820 + ((n) << 4)) : \ - ORION_PCIE_REG(0x1880)) -#define PCIE_WIN_BASE(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x1824 + ((n) << 4)) : \ - ORION_PCIE_REG(0x1884)) -#define PCIE_WIN_REMAP(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x182c + ((n) << 4)) : \ - ORION_PCIE_REG(0x188c)) -#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0) -#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0) -#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4) -#define PCIE_MAX_BARS 3 -#define PCIE_MAX_WINS 6 - -/* - * Use PCIE BAR '1' for all DDR banks - */ -#define PCIE_DRAM_BAR 1 - -/* - * PCI Address Decode Windows registers - */ -#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \ - ((n) == 1) ? ORION_PCI_REG(0xd08) : \ - ((n) == 2) ? ORION_PCI_REG(0xc0c) : \ - ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0) -#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \ - ((n) == 1) ? ORION_PCI_REG(0xd48) : \ - ((n) == 2) ? ORION_PCI_REG(0xc4c) : \ - ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0) -#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c) -#define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4)) -#define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4)) -#define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4)) -#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c) - -/* - * PCI configuration heleprs for BAR settings - */ -#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) -#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) -#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) - -/* - * Gigabit Ethernet Address Decode Windows registers - */ -#define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8)) -#define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8)) -#define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4)) -#define ETH_WIN_EN ORION_ETH_REG(0x290) -#define ETH_WIN_PROT ORION_ETH_REG(0x294) -#define ETH_MAX_WIN 6 -#define ETH_MAX_REMAP_WIN 4 - -/* - * USB Address Decode Windows registers - */ -#define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \ - : ORION_USB1_REG(0x320 + ((w) << 4))) -#define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \ - : ORION_USB1_REG(0x324 + ((w) << 4))) -#define USB_MAX_WIN 4 - -/* - * SATA Address Decode Windows registers - */ -#define SATA_WIN_CTRL(win) ORION_SATA_REG(0x30 + ((win) * 0x10)) -#define SATA_WIN_BASE(win) ORION_SATA_REG(0x34 + ((win) * 0x10)) -#define SATA_MAX_WIN 4 - -static int __init orion_cpu_win_can_remap(u32 win) -{ - u32 dev, rev; - - orion_pcie_id(&dev, &rev); - if ((dev == MV88F5281_DEV_ID && win < 4) - || (dev == MV88F5182_DEV_ID && win < 2) - || (dev == MV88F5181_DEV_ID && win < 2)) - return 1; - - return 0; -} - -void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap) -{ - u32 win, attr, ctrl; - - switch (target) { - case ORION_PCIE_IO: - target = TARGET_PCIE; - attr = ATTR_PCIE_IO; - win = CPU_WIN_PCIE_IO; - break; - case ORION_PCI_IO: - target = TARGET_PCI; - attr = ATTR_PCI_IO; - win = CPU_WIN_PCI_IO; - break; - case ORION_PCIE_MEM: - target = TARGET_PCIE; - attr = ATTR_PCIE_MEM; - win = CPU_WIN_PCIE_MEM; - break; - case ORION_PCI_MEM: - target = TARGET_PCI; - attr = ATTR_PCI_MEM; - win = CPU_WIN_PCI_MEM; - break; - case ORION_DEV_BOOT: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_BOOT; - win = CPU_WIN_DEV_BOOT; - break; - case ORION_DEV0: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_CS0; - win = CPU_WIN_DEV_CS0; - break; - case ORION_DEV1: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_CS1; - win = CPU_WIN_DEV_CS1; - break; - case ORION_DEV2: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_CS2; - win = CPU_WIN_DEV_CS2; - break; - case ORION_DDR: - case ORION_REGS: - /* - * Must be mapped by bootloader. - */ - default: - target = attr = win = -1; - BUG(); - } - - base &= 0xffff0000; - ctrl = (((size - 1) & 0xffff0000) | (attr << 8) | - (target << 4) | WIN_EN); - - orion_write(CPU_WIN_BASE(win), base); - orion_write(CPU_WIN_CTRL(win), ctrl); - - if (orion_cpu_win_can_remap(win)) { - if (remap >= 0) { - orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); - orion_write(CPU_WIN_REMAP_HI(win), 0); - } else { - orion_write(CPU_WIN_REMAP_LO(win), base); - orion_write(CPU_WIN_REMAP_HI(win), 0); - } - } -} - -void __init orion_setup_cpu_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < CPU_MAX_WIN; i++) { - orion_write(CPU_WIN_BASE(i), 0); - orion_write(CPU_WIN_CTRL(i), 0); - if (orion_cpu_win_can_remap(i)) { - orion_write(CPU_WIN_REMAP_LO(i), 0); - orion_write(CPU_WIN_REMAP_HI(i), 0); - } - } - - /* - * Setup windows for PCI+PCIe IO+MEM space. - */ - orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE, - ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE); - orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE, - ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE); - orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE, - ORION_PCIE_MEM_SIZE, -1); - orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE, - ORION_PCI_MEM_SIZE, -1); -} - -/* - * Setup PCIE BARs and Address Decode Wins: - * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks - * WIN[0-3] -> DRAM bank[0-3] - */ -void __init orion_setup_pcie_wins(void) -{ - u32 base, size, i; - - /* - * First, disable and clear BARs and windows - */ - for (i = 1; i < PCIE_MAX_BARS; i++) { - orion_write(PCIE_BAR_CTRL(i), 0); - orion_write(PCIE_BAR_LO(i), 0); - orion_write(PCIE_BAR_HI(i), 0); - } - - for (i = 0; i < PCIE_MAX_WINS; i++) { - orion_write(PCIE_WIN_CTRL(i), 0); - orion_write(PCIE_WIN_BASE(i), 0); - orion_write(PCIE_WIN_REMAP(i), 0); - } - - /* - * Setup windows for DDR banks. Count total DDR size on the fly. - */ - base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0))); - size = 0; - for (i = 0; i < DDR_MAX_CS; i++) { - u32 bank_base, bank_size; - bank_size = orion_read(DDR_SIZE_CS(i)); - bank_base = orion_read(DDR_BASE_CS(i)); - if (bank_size & DDR_BANK_EN) { - bank_size = DDR_REG_TO_SIZE(bank_size); - bank_base = DDR_REG_TO_BASE(bank_base); - orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000); - orion_write(PCIE_WIN_REMAP(i), 0); - orion_write(PCIE_WIN_CTRL(i), - ((bank_size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | - (PCIE_DRAM_BAR << 1) | WIN_EN); - size += bank_size; - } - } - - /* - * Setup BAR[1] to all DRAM banks - */ - orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000); - orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0); - orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR), - ((size - 1) & 0xffff0000) | WIN_EN); -} - -void __init orion_setup_pci_wins(void) -{ - u32 base, size, i; - - /* - * First, disable windows - */ - orion_write(PCI_BAR_ENABLE, 0xffffffff); - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - base = orion_read(DDR_BASE_CS(i)); - size = orion_read(DDR_SIZE_CS(i)); - if (size & DDR_BANK_EN) { - u32 bus, dev, func, reg, val; - size = DDR_REG_TO_SIZE(size); - base = DDR_REG_TO_BASE(base); - bus = orion_pci_local_bus_nr(); - dev = orion_pci_local_dev_nr(); - func = PCI_CONF_FUNC_BAR_CS(i); - reg = PCI_CONF_REG_BAR_LO_CS(i); - orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val); - orion_pci_hw_wr_conf(bus, dev, func, reg, 4, - (base & 0xfffff000) | (val & 0xfff)); - reg = PCI_CONF_REG_BAR_HI_CS(i); - orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0); - orion_write(PCI_BAR_SIZE_DDR_CS(i), - (size - 1) & 0xfffff000); - orion_write(PCI_BAR_REMAP_DDR_CS(i), - base & 0xfffff000); - orion_clrbits(PCI_BAR_ENABLE, (1 << i)); - } - } - - /* - * Disable automatic update of address remaping when writing to BARs - */ - orion_setbits(PCI_ADDR_DECODE_CTRL, 1); -} - -void __init orion_setup_usb_wins(void) -{ - int i; - u32 usb_if, dev, rev; - u32 max_usb_if = 1; - - orion_pcie_id(&dev, &rev); - if (dev == MV88F5182_DEV_ID) - max_usb_if = 2; - - for (usb_if = 0; usb_if < max_usb_if; usb_if++) { - /* - * First, disable and clear windows - */ - for (i = 0; i < USB_MAX_WIN; i++) { - orion_write(USB_WIN_BASE(usb_if, i), 0); - orion_write(USB_WIN_CTRL(usb_if, i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(USB_WIN_CTRL(usb_if, i), - ((size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | WIN_EN); - orion_write(USB_WIN_BASE(usb_if, i), - base & 0xffff0000); - } - } - } -} - -void __init orion_setup_eth_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < ETH_MAX_WIN; i++) { - orion_write(ETH_WIN_BASE(i), 0); - orion_write(ETH_WIN_SIZE(i), 0); - orion_setbits(ETH_WIN_EN, 1 << i); - orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2)); - if (i < ETH_MAX_REMAP_WIN) - orion_write(ETH_WIN_REMAP(i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000); - orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - TARGET_DDR); - orion_clrbits(ETH_WIN_EN, 1 << i); - orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2)); - } - } -} - -void __init orion_setup_sata_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < SATA_MAX_WIN; i++) { - orion_write(SATA_WIN_BASE(i), 0); - orion_write(SATA_WIN_CTRL(i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(SATA_WIN_CTRL(i), - ((size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | WIN_EN); - orion_write(SATA_WIN_BASE(i), - base & 0xffff0000); - } - } -} diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h deleted file mode 100644 index 501497cc2c4d..000000000000 --- a/arch/arm/mach-orion/common.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ARCH_ORION_COMMON_H__ -#define __ARCH_ORION_COMMON_H__ - -/* - * Basic Orion init functions used early by machine-setup. - */ - -void __init orion_map_io(void); -void __init orion_init_irq(void); -void __init orion_init(void); - -/* - * Enumerations and functions for Orion windows mapping. Used by Orion core - * functions to map its interfaces and by the machine-setup to map its on- - * board devices. Details in /mach-orion/addr-map.c - */ - -enum orion_target { - ORION_DEV_BOOT = 0, - ORION_DEV0, - ORION_DEV1, - ORION_DEV2, - ORION_PCIE_MEM, - ORION_PCIE_IO, - ORION_PCI_MEM, - ORION_PCI_IO, - ORION_DDR, - ORION_REGS, - ORION_MAX_TARGETS -}; - -void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap); -void orion_setup_cpu_wins(void); -void orion_setup_eth_wins(void); -void orion_setup_usb_wins(void); -void orion_setup_pci_wins(void); -void orion_setup_pcie_wins(void); -void orion_setup_sata_wins(void); - -/* - * Shared code used internally by other Orion core functions. - * (/mach-orion/pci.c) - */ - -struct pci_sys_data; -struct pci_bus; - -void orion_pcie_id(u32 *dev, u32 *rev); -u32 orion_pcie_local_bus_nr(void); -u32 orion_pci_local_bus_nr(void); -u32 orion_pci_local_dev_nr(void); -int orion_pci_sys_setup(int nr, struct pci_sys_data *sys); -struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); -int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 *val); -int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 val); - -/* - * Valid GPIO pins according to MPP setup, used by machine-setup. - * (/mach-orion/gpio.c). - */ - -void __init orion_gpio_set_valid_pins(u32 pins); -void gpio_display(void); /* debug */ - -/* - * Orion system timer (clocksource + clockevnt, /mach-orion/time.c) - */ -extern struct sys_timer orion_timer; - -/* - * Pull in Orion Ethernet platform_data, used by machine-setup - */ - -struct mv643xx_eth_platform_data; - -void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data); - -/* - * Orion Sata platform_data, used by machine-setup - */ - -struct mv_sata_platform_data; - -void __init orion_sata_init(struct mv_sata_platform_data *sata_data); - -struct machine_desc; -struct meminfo; -struct tag; -extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, - char **, struct meminfo *); - -#endif /* __ARCH_ORION_COMMON_H__ */ diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c deleted file mode 100644 index b109bb46681e..000000000000 --- a/arch/arm/mach-orion/pci.c +++ /dev/null @@ -1,557 +0,0 @@ -/* - * arch/arm/mach-orion/pci.c - * - * PCI and PCIE functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <asm/mach/pci.h> -#include "common.h" - -/***************************************************************************** - * Orion has one PCIE controller and one PCI controller. - * - * Note1: The local PCIE bus number is '0'. The local PCI bus number - * follows the scanned PCIE bridged busses, if any. - * - * Note2: It is possible for PCI/PCIE agents to access many subsystem's - * space, by configuring BARs and Address Decode Windows, e.g. flashes on - * device bus, Orion registers, etc. However this code only enable the - * access to DDR banks. - ****************************************************************************/ - - -/***************************************************************************** - * PCIE controller - ****************************************************************************/ -#define PCIE_CTRL ORION_PCIE_REG(0x1a00) -#define PCIE_STAT ORION_PCIE_REG(0x1a04) -#define PCIE_DEV_ID ORION_PCIE_REG(0x0000) -#define PCIE_CMD_STAT ORION_PCIE_REG(0x0004) -#define PCIE_DEV_REV ORION_PCIE_REG(0x0008) -#define PCIE_MASK ORION_PCIE_REG(0x1910) -#define PCIE_CONF_ADDR ORION_PCIE_REG(0x18f8) -#define PCIE_CONF_DATA ORION_PCIE_REG(0x18fc) - -/* - * PCIE_STAT bits - */ -#define PCIE_STAT_LINK_DOWN 1 -#define PCIE_STAT_BUS_OFFS 8 -#define PCIE_STAT_BUS_MASK (0xff << PCIE_STAT_BUS_OFFS) -#define PCIE_STAT_DEV_OFFS 20 -#define PCIE_STAT_DEV_MASK (0x1f << PCIE_STAT_DEV_OFFS) - -/* - * PCIE_CONF_ADDR bits - */ -#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 24) | ((r) & 0xfc)) -#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8) -#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) -#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) -#define PCIE_CONF_ADDR_EN (1 << 31) - -/* - * PCIE config cycles are done by programming the PCIE_CONF_ADDR register - * and then reading the PCIE_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ -static DEFINE_SPINLOCK(orion_pcie_lock); - -void orion_pcie_id(u32 *dev, u32 *rev) -{ - *dev = orion_read(PCIE_DEV_ID) >> 16; - *rev = orion_read(PCIE_DEV_REV) & 0xff; -} - -u32 orion_pcie_local_bus_nr(void) -{ - u32 stat = orion_read(PCIE_STAT); - return((stat & PCIE_STAT_BUS_MASK) >> PCIE_STAT_BUS_OFFS); -} - -static u32 orion_pcie_local_dev_nr(void) -{ - u32 stat = orion_read(PCIE_STAT); - return((stat & PCIE_STAT_DEV_MASK) >> PCIE_STAT_DEV_OFFS); -} - -static u32 orion_pcie_no_link(void) -{ - u32 stat = orion_read(PCIE_STAT); - return(stat & PCIE_STAT_LINK_DOWN); -} - -static void orion_pcie_set_bus_nr(int nr) -{ - orion_clrbits(PCIE_STAT, PCIE_STAT_BUS_MASK); - orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS); -} - -static void orion_pcie_master_slave_enable(void) -{ - orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER | - PCI_COMMAND_IO | - PCI_COMMAND_MEMORY); -} - -static void orion_pcie_enable_interrupts(void) -{ - /* - * Enable interrupts lines - * INTA[24] INTB[25] INTC[26] INTD[27] - */ - orion_setbits(PCIE_MASK, 0xf<<24); -} - -static int orion_pcie_valid_config(u32 bus, u32 dev) -{ - /* - * Don't go out when trying to access -- - * 1. our own device - * 2. where there's no device connected (no link) - * 3. nonexisting devices on local bus - */ - - if ((orion_pcie_local_bus_nr() == bus) && - (orion_pcie_local_dev_nr() == dev)) - return 0; - - if (orion_pcie_no_link()) - return 0; - - if (bus == orion_pcie_local_bus_nr()) - if (((orion_pcie_local_dev_nr() == 0) && (dev != 1)) || - ((orion_pcie_local_dev_nr() != 0) && (dev != 0))) - return 0; - - return 1; -} - -static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) -{ - unsigned long flags; - unsigned int dev, rev, pcie_addr; - - if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - spin_lock_irqsave(&orion_pcie_lock, flags); - - orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); - - orion_pcie_id(&dev, &rev); - if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { - /* extended register space */ - pcie_addr = ORION_PCIE_WA_VIRT_BASE; - pcie_addr |= PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where); - *val = orion_read(pcie_addr); - } else - *val = orion_read(PCIE_CONF_DATA); - - if (size == 1) - *val = (*val >> (8*(where & 0x3))) & 0xff; - else if (size == 2) - *val = (*val >> (8*(where & 0x3))) & 0xffff; - - spin_unlock_irqrestore(&orion_pcie_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - - -static int orion_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 val) -{ - unsigned long flags; - int ret; - - if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - spin_lock_irqsave(&orion_pcie_lock, flags); - - ret = PCIBIOS_SUCCESSFUL; - - orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); - - if (size == 4) { - __raw_writel(val, PCIE_CONF_DATA); - } else if (size == 2) { - __raw_writew(val, PCIE_CONF_DATA + (where & 0x3)); - } else if (size == 1) { - __raw_writeb(val, PCIE_CONF_DATA + (where & 0x3)); - } else { - ret = PCIBIOS_BAD_REGISTER_NUMBER; - } - - spin_unlock_irqrestore(&orion_pcie_lock, flags); - - return ret; -} - -struct pci_ops orion_pcie_ops = { - .read = orion_pcie_rd_conf, - .write = orion_pcie_wr_conf, -}; - - -static int orion_pcie_setup(struct pci_sys_data *sys) -{ - struct resource *res; - - /* - * Master + Slave enable - */ - orion_pcie_master_slave_enable(); - - /* - * Enable interrupts lines A-D - */ - orion_pcie_enable_interrupts(); - - /* - * Request resource - */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("orion_pci_setup unable to alloc resources"); - - /* - * IORESOURCE_IO - */ - res[0].name = "PCI-EX I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCIE_IO_BUS_BASE; - res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCIE IO resource failed\n"); - sys->resource[0] = &res[0]; - - /* - * IORESOURCE_MEM - */ - res[1].name = "PCI-EX Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCIE_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) - panic("Request PCIE Memory resource failed\n"); - sys->resource[1] = &res[1]; - - sys->resource[2] = NULL; - sys->io_offset = 0; - - return 1; -} - -/***************************************************************************** - * PCI controller - ****************************************************************************/ -#define PCI_MODE ORION_PCI_REG(0xd00) -#define PCI_CMD ORION_PCI_REG(0xc00) -#define PCI_P2P_CONF ORION_PCI_REG(0x1d14) -#define PCI_CONF_ADDR ORION_PCI_REG(0xc78) -#define PCI_CONF_DATA ORION_PCI_REG(0xc7c) - -/* - * PCI_MODE bits - */ -#define PCI_MODE_64BIT (1 << 2) -#define PCI_MODE_PCIX ((1 << 4) | (1 << 5)) - -/* - * PCI_CMD bits - */ -#define PCI_CMD_HOST_REORDER (1 << 29) - -/* - * PCI_P2P_CONF bits - */ -#define PCI_P2P_BUS_OFFS 16 -#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS) -#define PCI_P2P_DEV_OFFS 24 -#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS) - -/* - * PCI_CONF_ADDR bits - */ -#define PCI_CONF_REG(reg) ((reg) & 0xfc) -#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8) -#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11) -#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16) -#define PCI_CONF_ADDR_EN (1 << 31) - -/* - * Internal configuration space - */ -#define PCI_CONF_FUNC_STAT_CMD 0 -#define PCI_CONF_REG_STAT_CMD 4 -#define PCIX_STAT 0x64 -#define PCIX_STAT_BUS_OFFS 8 -#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS) - -/* - * PCI config cycles are done by programming the PCI_CONF_ADDR register - * and then reading the PCI_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ -static DEFINE_SPINLOCK(orion_pci_lock); - -u32 orion_pci_local_bus_nr(void) -{ - u32 conf = orion_read(PCI_P2P_CONF); - return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); -} - -u32 orion_pci_local_dev_nr(void) -{ - u32 conf = orion_read(PCI_P2P_CONF); - return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS); -} - -int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, - u32 where, u32 size, u32 *val) -{ - unsigned long flags; - spin_lock_irqsave(&orion_pci_lock, flags); - - orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | - PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | - PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); - - *val = orion_read(PCI_CONF_DATA); - - if (size == 1) - *val = (*val >> (8*(where & 0x3))) & 0xff; - else if (size == 2) - *val = (*val >> (8*(where & 0x3))) & 0xffff; - - spin_unlock_irqrestore(&orion_pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, - u32 where, u32 size, u32 val) -{ - unsigned long flags; - int ret = PCIBIOS_SUCCESSFUL; - - spin_lock_irqsave(&orion_pci_lock, flags); - - orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | - PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | - PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); - - if (size == 4) { - __raw_writel(val, PCI_CONF_DATA); - } else if (size == 2) { - __raw_writew(val, PCI_CONF_DATA + (where & 0x3)); - } else if (size == 1) { - __raw_writeb(val, PCI_CONF_DATA + (where & 0x3)); - } else { - ret = PCIBIOS_BAD_REGISTER_NUMBER; - } - - spin_unlock_irqrestore(&orion_pci_lock, flags); - - return ret; -} - -static int orion_pci_rd_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 *val) -{ - /* - * Don't go out for local device - */ - if ((orion_pci_local_bus_nr() == bus->number) && - (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return orion_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where, size, val); -} - -static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - /* - * Don't go out for local device - */ - if ((orion_pci_local_bus_nr() == bus->number) && - (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) - return PCIBIOS_DEVICE_NOT_FOUND; - - return orion_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where, size, val); -} - -struct pci_ops orion_pci_ops = { - .read = orion_pci_rd_conf, - .write = orion_pci_wr_conf, -}; - -static void orion_pci_set_bus_nr(int nr) -{ - u32 p2p = orion_read(PCI_P2P_CONF); - - if (orion_read(PCI_MODE) & PCI_MODE_PCIX) { - /* - * PCI-X mode - */ - u32 pcix_status, bus, dev; - bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS; - dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS; - orion_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status); - pcix_status &= ~PCIX_STAT_BUS_MASK; - pcix_status |= (nr << PCIX_STAT_BUS_OFFS); - orion_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status); - } else { - /* - * PCI Conventional mode - */ - p2p &= ~PCI_P2P_BUS_MASK; - p2p |= (nr << PCI_P2P_BUS_OFFS); - orion_write(PCI_P2P_CONF, p2p); - } -} - -static void orion_pci_master_slave_enable(void) -{ - u32 bus_nr, dev_nr, func, reg, val; - - bus_nr = orion_pci_local_bus_nr(); - dev_nr = orion_pci_local_dev_nr(); - func = PCI_CONF_FUNC_STAT_CMD; - reg = PCI_CONF_REG_STAT_CMD; - orion_pci_hw_rd_conf(bus_nr, dev_nr, func, reg, 4, &val); - val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - orion_pci_hw_wr_conf(bus_nr, dev_nr, func, reg, 4, val | 0x7); -} - -static int orion_pci_setup(struct pci_sys_data *sys) -{ - struct resource *res; - - /* - * Master + Slave enable - */ - orion_pci_master_slave_enable(); - - /* - * Force ordering - */ - orion_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); - - /* - * Request resources - */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("orion_pci_setup unable to alloc resources"); - - /* - * IORESOURCE_IO - */ - res[0].name = "PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCI_IO_BUS_BASE; - res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCI IO resource failed\n"); - sys->resource[0] = &res[0]; - - /* - * IORESOURCE_MEM - */ - res[1].name = "PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCI_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) - panic("Request PCI Memory resource failed\n"); - sys->resource[1] = &res[1]; - - sys->resource[2] = NULL; - sys->io_offset = 0; - - return 1; -} - - -/***************************************************************************** - * General PCIE + PCI - ****************************************************************************/ -int orion_pci_sys_setup(int nr, struct pci_sys_data *sys) -{ - int ret = 0; - - if (nr == 0) { - /* - * PCIE setup - */ - orion_pcie_set_bus_nr(0); - ret = orion_pcie_setup(sys); - } else if (nr == 1) { - /* - * PCI setup - */ - ret = orion_pci_setup(sys); - } - - return ret; -} - -struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) -{ - struct pci_ops *ops; - struct pci_bus *bus; - - - if (nr == 0) { - u32 pci_bus; - /* - * PCIE scan - */ - ops = &orion_pcie_ops; - bus = pci_scan_bus(sys->busnr, ops, sys); - /* - * Set local PCI bus number to follow PCIE bridges (if any) - */ - pci_bus = bus->number + bus->subordinate - bus->secondary + 1; - orion_pci_set_bus_nr(pci_bus); - } else if (nr == 1) { - /* - * PCI scan - */ - ops = &orion_pci_ops; - bus = pci_scan_bus(sys->busnr, ops, sys); - } else { - BUG(); - bus = NULL; - } - - return bus; -} diff --git a/arch/arm/mach-orion/time.c b/arch/arm/mach-orion/time.c deleted file mode 100644 index bd4262da4f40..000000000000 --- a/arch/arm/mach-orion/time.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * arch/arm/mach-orion/time.c - * - * Core time functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/clockchips.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <asm/mach/time.h> -#include <asm/arch/orion.h> -#include "common.h" - -/* - * Timer0: clock_event_device, Tick. - * Timer1: clocksource, Free running. - * WatchDog: Not used. - * - * Timers are counting down. - */ -#define CLOCKEVENT 0 -#define CLOCKSOURCE 1 - -/* - * Timers bits - */ -#define BRIDGE_INT_TIMER(x) (1 << ((x) + 1)) -#define TIMER_EN(x) (1 << ((x) * 2)) -#define TIMER_RELOAD_EN(x) (1 << (((x) * 2) + 1)) -#define BRIDGE_INT_TIMER_WD (1 << 3) -#define TIMER_WD_EN (1 << 4) -#define TIMER_WD_RELOAD_EN (1 << 5) - -static cycle_t orion_clksrc_read(void) -{ - return (0xffffffff - orion_read(TIMER_VAL(CLOCKSOURCE))); -} - -static struct clocksource orion_clksrc = { - .name = "orion_clocksource", - .shift = 20, - .rating = 300, - .read = orion_clksrc_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int -orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) -{ - unsigned long flags; - - if (delta == 0) - return -ETIME; - - local_irq_save(flags); - - /* - * Clear and enable timer interrupt bit - */ - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - - /* - * Setup new timer value - */ - orion_write(TIMER_VAL(CLOCKEVENT), delta); - - /* - * Disable auto reload and kickoff the timer - */ - orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT)); - orion_setbits(TIMER_CTRL, TIMER_EN(CLOCKEVENT)); - - local_irq_restore(flags); - - return 0; -} - -static void -orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - unsigned long flags; - - local_irq_save(flags); - - if (mode == CLOCK_EVT_MODE_PERIODIC) { - /* - * Setup latch cycles in timer and enable reload interrupt. - */ - orion_write(TIMER_VAL_RELOAD(CLOCKEVENT), LATCH); - orion_write(TIMER_VAL(CLOCKEVENT), LATCH); - orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | - TIMER_EN(CLOCKEVENT)); - } else { - /* - * Disable timer and interrupt - */ - orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | - TIMER_EN(CLOCKEVENT)); - } - - local_irq_restore(flags); -} - -static struct clock_event_device orion_clkevt = { - .name = "orion_tick", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .rating = 300, - .cpumask = CPU_MASK_CPU0, - .set_next_event = orion_clkevt_next_event, - .set_mode = orion_clkevt_mode, -}; - -static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) -{ - /* - * Clear cause bit and do event - */ - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_clkevt.event_handler(&orion_clkevt); - return IRQ_HANDLED; -} - -static struct irqaction orion_timer_irq = { - .name = "orion_tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = orion_timer_interrupt -}; - -static void orion_timer_init(void) -{ - /* - * Setup clocksource free running timer (no interrupt on reload) - */ - orion_write(TIMER_VAL(CLOCKSOURCE), 0xffffffff); - orion_write(TIMER_VAL_RELOAD(CLOCKSOURCE), 0xffffffff); - orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKSOURCE)); - orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKSOURCE) | - TIMER_EN(CLOCKSOURCE)); - - /* - * Register clocksource - */ - orion_clksrc.mult = - clocksource_hz2mult(CLOCK_TICK_RATE, orion_clksrc.shift); - - clocksource_register(&orion_clksrc); - - /* - * Connect and enable tick handler - */ - setup_irq(IRQ_ORION_BRIDGE, &orion_timer_irq); - - /* - * Register clockevent - */ - orion_clkevt.mult = - div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, orion_clkevt.shift); - orion_clkevt.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &orion_clkevt); - orion_clkevt.min_delta_ns = - clockevent_delta2ns(1, &orion_clkevt); - - clockevents_register_device(&orion_clkevt); -} - -struct sys_timer orion_timer = { - .init = orion_timer_init, -}; diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion5x/Kconfig index 1dcbb6ac5a30..93debf336155 100644 --- a/arch/arm/mach-orion/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -1,4 +1,4 @@ -if ARCH_ORION +if ARCH_ORION5X menu "Orion Implementations" @@ -36,6 +36,14 @@ config MACH_TS209 Say 'Y' here if you want your kernel to support the QNAP TS-109/TS-209 platform. +config MACH_LINKSTATION_PRO + bool "Buffalo Linkstation Pro/Live" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation Pro/Live platform. Both v1 and + v2 devices are supported. + endmenu endif diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion5x/Makefile index f91d937a73e8..9301bf55910b 100644 --- a/arch/arm/mach-orion/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -1,6 +1,7 @@ -obj-y += common.o addr-map.o pci.o gpio.o irq.o time.o +obj-y += common.o addr-map.o pci.o gpio.o irq.o obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o +obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_DNS323) += dns323-setup.o obj-$(CONFIG_MACH_TS209) += ts209-setup.o diff --git a/arch/arm/mach-orion/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot index 67039c3e0c48..67039c3e0c48 100644 --- a/arch/arm/mach-orion/Makefile.boot +++ b/arch/arm/mach-orion5x/Makefile.boot diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c new file mode 100644 index 000000000000..e63fb05dc893 --- /dev/null +++ b/arch/arm/mach-orion5x/addr-map.c @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-orion5x/addr-map.c + * + * Address map functions for Marvell Orion 5x SoCs + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include "common.h" + +/* + * The Orion has fully programable address map. There's a separate address + * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB, + * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own + * address decode windows that allow it to access any of the Orion resources. + * + * CPU address decoding -- + * Linux assumes that it is the boot loader that already setup the access to + * DDR and internal registers. + * Setup access to PCI and PCIe IO/MEM space is issued by this file. + * Setup access to various devices located on the device bus interface (e.g. + * flashes, RTC, etc) should be issued by machine-setup.c according to + * specific board population (by using orion5x_setup_*_win()). + * + * Non-CPU Masters address decoding -- + * Unlike the CPU, we setup the access from Orion's master interfaces to DDR + * banks only (the typical use case). + * Setup access for each master to DDR is issued by platform device setup. + */ + +/* + * Generic Address Decode Windows bit settings + */ +#define TARGET_DDR 0 +#define TARGET_DEV_BUS 1 +#define TARGET_PCI 3 +#define TARGET_PCIE 4 +#define ATTR_PCIE_MEM 0x59 +#define ATTR_PCIE_IO 0x51 +#define ATTR_PCIE_WA 0x79 +#define ATTR_PCI_MEM 0x59 +#define ATTR_PCI_IO 0x51 +#define ATTR_DEV_CS0 0x1e +#define ATTR_DEV_CS1 0x1d +#define ATTR_DEV_CS2 0x1b +#define ATTR_DEV_BOOT 0xf + +/* + * Helpers to get DDR bank info + */ +#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3)) +#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3)) + +/* + * CPU Address Decode Windows registers + */ +#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) +#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) +#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) +#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4)) + + +struct mbus_dram_target_info orion5x_mbus_dram_info; + +static int __init orion5x_cpu_win_can_remap(int win) +{ + u32 dev, rev; + + orion5x_pcie_id(&dev, &rev); + if ((dev == MV88F5281_DEV_ID && win < 4) + || (dev == MV88F5182_DEV_ID && win < 2) + || (dev == MV88F5181_DEV_ID && win < 2)) + return 1; + + return 0; +} + +static void __init setup_cpu_win(int win, u32 base, u32 size, + u8 target, u8 attr, int remap) +{ + orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000); + orion5x_write(CPU_WIN_CTRL(win), + ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1); + + if (orion5x_cpu_win_can_remap(win)) { + if (remap < 0) + remap = base; + + orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); + orion5x_write(CPU_WIN_REMAP_HI(win), 0); + } +} + +void __init orion5x_setup_cpu_mbus_bridge(void) +{ + int i; + int cs; + + /* + * First, disable and clear windows. + */ + for (i = 0; i < 8; i++) { + orion5x_write(CPU_WIN_BASE(i), 0); + orion5x_write(CPU_WIN_CTRL(i), 0); + if (orion5x_cpu_win_can_remap(i)) { + orion5x_write(CPU_WIN_REMAP_LO(i), 0); + orion5x_write(CPU_WIN_REMAP_HI(i), 0); + } + } + + /* + * Setup windows for PCI+PCIe IO+MEM space. + */ + setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, + TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE); + setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, + TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE); + setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE_MEM, -1); + setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, + TARGET_PCI, ATTR_PCI_MEM, -1); + + /* + * Setup MBUS dram target info. + */ + orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(DDR_BASE_CS(i)); + u32 size = readl(DDR_SIZE_CS(i)); + + /* + * Chip select enabled? + */ + if (size & 1) { + struct mbus_dram_window *w; + + w = &orion5x_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + w->base = base & 0xff000000; + w->size = (size | 0x00ffffff) + 1; + } + } + orion5x_mbus_dram_info.num_cs = cs; +} + +void __init orion5x_setup_dev_boot_win(u32 base, u32 size) +{ + setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); +} + +void __init orion5x_setup_dev0_win(u32 base, u32 size) +{ + setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1); +} + +void __init orion5x_setup_dev1_win(u32 base, u32 size) +{ + setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1); +} + +void __init orion5x_setup_dev2_win(u32 base, u32 size) +{ + setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1); +} + +void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) +{ + setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1); +} diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion5x/common.c index bbc2b4ec932c..4f13fd037f04 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/common.c + * arch/arm/mach-orion5x/common.c * - * Core functions for Marvell Orion System On Chip + * Core functions for Marvell Orion 5x SoCs * * Maintainer: Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -14,64 +14,71 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <linux/mbus.h> #include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> +#include <linux/ata_platform.h> #include <asm/page.h> #include <asm/setup.h> #include <asm/timex.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> #include <asm/arch/hardware.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/ehci-orion.h> +#include <asm/plat-orion/orion_nand.h> +#include <asm/plat-orion/time.h> #include "common.h" /***************************************************************************** * I/O Address Mapping ****************************************************************************/ -static struct map_desc orion_io_desc[] __initdata = { +static struct map_desc orion5x_io_desc[] __initdata = { { - .virtual = ORION_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_REGS_PHYS_BASE), - .length = ORION_REGS_SIZE, + .virtual = ORION5X_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE), + .length = ORION5X_REGS_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCIE_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_IO_PHYS_BASE), - .length = ORION_PCIE_IO_SIZE, + .virtual = ORION5X_PCIE_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE), + .length = ORION5X_PCIE_IO_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCI_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCI_IO_PHYS_BASE), - .length = ORION_PCI_IO_SIZE, + .virtual = ORION5X_PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE), + .length = ORION5X_PCI_IO_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCIE_WA_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_WA_PHYS_BASE), - .length = ORION_PCIE_WA_SIZE, + .virtual = ORION5X_PCIE_WA_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE), + .length = ORION5X_PCIE_WA_SIZE, .type = MT_DEVICE }, }; -void __init orion_map_io(void) +void __init orion5x_map_io(void) { - iotable_init(orion_io_desc, ARRAY_SIZE(orion_io_desc)); + iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc)); } /***************************************************************************** * UART ****************************************************************************/ -static struct resource orion_uart_resources[] = { +static struct resource orion5x_uart_resources[] = { { .start = UART0_PHYS_BASE, .end = UART0_PHYS_BASE + 0xff, .flags = IORESOURCE_MEM, }, { - .start = IRQ_ORION_UART0, - .end = IRQ_ORION_UART0, + .start = IRQ_ORION5X_UART0, + .end = IRQ_ORION5X_UART0, .flags = IORESOURCE_IRQ, }, { @@ -80,96 +87,102 @@ static struct resource orion_uart_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_ORION_UART1, - .end = IRQ_ORION_UART1, + .start = IRQ_ORION5X_UART1, + .end = IRQ_ORION5X_UART1, .flags = IORESOURCE_IRQ, }, }; -static struct plat_serial8250_port orion_uart_data[] = { +static struct plat_serial8250_port orion5x_uart_data[] = { { .mapbase = UART0_PHYS_BASE, .membase = (char *)UART0_VIRT_BASE, - .irq = IRQ_ORION_UART0, + .irq = IRQ_ORION5X_UART0, .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = ORION_TCLK, + .uartclk = ORION5X_TCLK, }, { .mapbase = UART1_PHYS_BASE, .membase = (char *)UART1_VIRT_BASE, - .irq = IRQ_ORION_UART1, + .irq = IRQ_ORION5X_UART1, .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = ORION_TCLK, + .uartclk = ORION5X_TCLK, }, { }, }; -static struct platform_device orion_uart = { +static struct platform_device orion5x_uart = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM, .dev = { - .platform_data = orion_uart_data, + .platform_data = orion5x_uart_data, }, - .resource = orion_uart_resources, - .num_resources = ARRAY_SIZE(orion_uart_resources), + .resource = orion5x_uart_resources, + .num_resources = ARRAY_SIZE(orion5x_uart_resources), }; /******************************************************************************* * USB Controller - 2 interfaces ******************************************************************************/ -static struct resource orion_ehci0_resources[] = { +static struct resource orion5x_ehci0_resources[] = { { - .start = ORION_USB0_PHYS_BASE, - .end = ORION_USB0_PHYS_BASE + SZ_4K, + .start = ORION5X_USB0_PHYS_BASE, + .end = ORION5X_USB0_PHYS_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, { - .start = IRQ_ORION_USB0_CTRL, - .end = IRQ_ORION_USB0_CTRL, + .start = IRQ_ORION5X_USB0_CTRL, + .end = IRQ_ORION5X_USB0_CTRL, .flags = IORESOURCE_IRQ, }, }; -static struct resource orion_ehci1_resources[] = { +static struct resource orion5x_ehci1_resources[] = { { - .start = ORION_USB1_PHYS_BASE, - .end = ORION_USB1_PHYS_BASE + SZ_4K, + .start = ORION5X_USB1_PHYS_BASE, + .end = ORION5X_USB1_PHYS_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, { - .start = IRQ_ORION_USB1_CTRL, - .end = IRQ_ORION_USB1_CTRL, + .start = IRQ_ORION5X_USB1_CTRL, + .end = IRQ_ORION5X_USB1_CTRL, .flags = IORESOURCE_IRQ, }, }; +static struct orion_ehci_data orion5x_ehci_data = { + .dram = &orion5x_mbus_dram_info, +}; + static u64 ehci_dmamask = 0xffffffffUL; -static struct platform_device orion_ehci0 = { +static struct platform_device orion5x_ehci0 = { .name = "orion-ehci", .id = 0, .dev = { .dma_mask = &ehci_dmamask, .coherent_dma_mask = 0xffffffff, + .platform_data = &orion5x_ehci_data, }, - .resource = orion_ehci0_resources, - .num_resources = ARRAY_SIZE(orion_ehci0_resources), + .resource = orion5x_ehci0_resources, + .num_resources = ARRAY_SIZE(orion5x_ehci0_resources), }; -static struct platform_device orion_ehci1 = { +static struct platform_device orion5x_ehci1 = { .name = "orion-ehci", .id = 1, .dev = { .dma_mask = &ehci_dmamask, .coherent_dma_mask = 0xffffffff, + .platform_data = &orion5x_ehci_data, }, - .resource = orion_ehci1_resources, - .num_resources = ARRAY_SIZE(orion_ehci1_resources), + .resource = orion5x_ehci1_resources, + .num_resources = ARRAY_SIZE(orion5x_ehci1_resources), }; /***************************************************************************** @@ -177,42 +190,52 @@ static struct platform_device orion_ehci1 = { * (The Orion and Discovery (MV643xx) families use the same Ethernet driver) ****************************************************************************/ -static struct resource orion_eth_shared_resources[] = { +struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = { + .dram = &orion5x_mbus_dram_info, + .t_clk = ORION5X_TCLK, +}; + +static struct resource orion5x_eth_shared_resources[] = { { - .start = ORION_ETH_PHYS_BASE + 0x2000, - .end = ORION_ETH_PHYS_BASE + 0x3fff, + .start = ORION5X_ETH_PHYS_BASE + 0x2000, + .end = ORION5X_ETH_PHYS_BASE + 0x3fff, .flags = IORESOURCE_MEM, }, }; -static struct platform_device orion_eth_shared = { +static struct platform_device orion5x_eth_shared = { .name = MV643XX_ETH_SHARED_NAME, .id = 0, + .dev = { + .platform_data = &orion5x_eth_shared_data, + }, .num_resources = 1, - .resource = orion_eth_shared_resources, + .resource = orion5x_eth_shared_resources, }; -static struct resource orion_eth_resources[] = { +static struct resource orion5x_eth_resources[] = { { .name = "eth irq", - .start = IRQ_ORION_ETH_SUM, - .end = IRQ_ORION_ETH_SUM, + .start = IRQ_ORION5X_ETH_SUM, + .end = IRQ_ORION5X_ETH_SUM, .flags = IORESOURCE_IRQ, } }; -static struct platform_device orion_eth = { +static struct platform_device orion5x_eth = { .name = MV643XX_ETH_NAME, .id = 0, .num_resources = 1, - .resource = orion_eth_resources, + .resource = orion5x_eth_resources, }; -void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data) +void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { - orion_eth.dev.platform_data = eth_data; - platform_device_register(&orion_eth_shared); - platform_device_register(&orion_eth); + eth_data->shared = &orion5x_eth_shared; + orion5x_eth.dev.platform_data = eth_data; + + platform_device_register(&orion5x_eth_shared); + platform_device_register(&orion5x_eth); } /***************************************************************************** @@ -220,13 +243,13 @@ void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data) * (The Orion and Discovery (MV643xx) families share the same I2C controller) ****************************************************************************/ -static struct mv64xxx_i2c_pdata orion_i2c_pdata = { +static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { .freq_m = 8, /* assumes 166 MHz TCLK */ .freq_n = 3, .timeout = 1000, /* Default timeout of 1 second */ }; -static struct resource orion_i2c_resources[] = { +static struct resource orion5x_i2c_resources[] = { { .name = "i2c base", .start = I2C_PHYS_BASE, @@ -235,66 +258,80 @@ static struct resource orion_i2c_resources[] = { }, { .name = "i2c irq", - .start = IRQ_ORION_I2C, - .end = IRQ_ORION_I2C, + .start = IRQ_ORION5X_I2C, + .end = IRQ_ORION5X_I2C, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device orion_i2c = { +static struct platform_device orion5x_i2c = { .name = MV64XXX_I2C_CTLR_NAME, .id = 0, - .num_resources = ARRAY_SIZE(orion_i2c_resources), - .resource = orion_i2c_resources, + .num_resources = ARRAY_SIZE(orion5x_i2c_resources), + .resource = orion5x_i2c_resources, .dev = { - .platform_data = &orion_i2c_pdata, + .platform_data = &orion5x_i2c_pdata, }, }; /***************************************************************************** * Sata port ****************************************************************************/ -static struct resource orion_sata_resources[] = { +static struct resource orion5x_sata_resources[] = { { .name = "sata base", - .start = ORION_SATA_PHYS_BASE, - .end = ORION_SATA_PHYS_BASE + 0x5000 - 1, + .start = ORION5X_SATA_PHYS_BASE, + .end = ORION5X_SATA_PHYS_BASE + 0x5000 - 1, .flags = IORESOURCE_MEM, }, { .name = "sata irq", - .start = IRQ_ORION_SATA, - .end = IRQ_ORION_SATA, + .start = IRQ_ORION5X_SATA, + .end = IRQ_ORION5X_SATA, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device orion_sata = { +static struct platform_device orion5x_sata = { .name = "sata_mv", .id = 0, .dev = { .coherent_dma_mask = 0xffffffff, }, - .num_resources = ARRAY_SIZE(orion_sata_resources), - .resource = orion_sata_resources, + .num_resources = ARRAY_SIZE(orion5x_sata_resources), + .resource = orion5x_sata_resources, }; -void __init orion_sata_init(struct mv_sata_platform_data *sata_data) +void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) +{ + sata_data->dram = &orion5x_mbus_dram_info; + orion5x_sata.dev.platform_data = sata_data; + platform_device_register(&orion5x_sata); +} + +/***************************************************************************** + * Time handling + ****************************************************************************/ + +static void orion5x_timer_init(void) { - orion_sata.dev.platform_data = sata_data; - platform_device_register(&orion_sata); + orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK); } +struct sys_timer orion5x_timer = { + .init = orion5x_timer_init, +}; + /***************************************************************************** * General ****************************************************************************/ /* - * Identify device ID and rev from PCIE configuration header space '0'. + * Identify device ID and rev from PCIe configuration header space '0'. */ -static void orion_id(u32 *dev, u32 *rev, char **dev_name) +static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) { - orion_pcie_id(dev, rev); + orion5x_pcie_id(dev, rev); if (*dev == MV88F5281_DEV_ID) { if (*rev == MV88F5281_REV_D2) { @@ -321,33 +358,27 @@ static void orion_id(u32 *dev, u32 *rev, char **dev_name) } } -void __init orion_init(void) +void __init orion5x_init(void) { char *dev_name; u32 dev, rev; - orion_id(&dev, &rev, &dev_name); - printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION_TCLK); + orion5x_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION5X_TCLK); /* * Setup Orion address map */ - orion_setup_cpu_wins(); - orion_setup_usb_wins(); - orion_setup_eth_wins(); - orion_setup_pci_wins(); - orion_setup_pcie_wins(); - if (dev == MV88F5182_DEV_ID) - orion_setup_sata_wins(); + orion5x_setup_cpu_mbus_bridge(); /* - * REgister devices + * Register devices. */ - platform_device_register(&orion_uart); - platform_device_register(&orion_ehci0); + platform_device_register(&orion5x_uart); + platform_device_register(&orion5x_ehci0); if (dev == MV88F5182_DEV_ID) - platform_device_register(&orion_ehci1); - platform_device_register(&orion_i2c); + platform_device_register(&orion5x_ehci1); + platform_device_register(&orion5x_i2c); } /* diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h new file mode 100644 index 000000000000..bd0f05de6e18 --- /dev/null +++ b/arch/arm/mach-orion5x/common.h @@ -0,0 +1,70 @@ +#ifndef __ARCH_ORION5X_COMMON_H +#define __ARCH_ORION5X_COMMON_H + +/* + * Basic Orion init functions used early by machine-setup. + */ + +void orion5x_map_io(void); +void orion5x_init_irq(void); +void orion5x_init(void); +extern struct sys_timer orion5x_timer; + +/* + * Enumerations and functions for Orion windows mapping. Used by Orion core + * functions to map its interfaces and by the machine-setup to map its on- + * board devices. Details in /mach-orion/addr-map.c + */ +extern struct mbus_dram_target_info orion5x_mbus_dram_info; +void orion5x_setup_cpu_mbus_bridge(void); +void orion5x_setup_dev_boot_win(u32 base, u32 size); +void orion5x_setup_dev0_win(u32 base, u32 size); +void orion5x_setup_dev1_win(u32 base, u32 size); +void orion5x_setup_dev2_win(u32 base, u32 size); +void orion5x_setup_pcie_wa_win(u32 base, u32 size); + +/* + * Shared code used internally by other Orion core functions. + * (/mach-orion/pci.c) + */ + +struct pci_sys_data; +struct pci_bus; + +void orion5x_pcie_id(u32 *dev, u32 *rev); +int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); +struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); +int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); + +/* + * Valid GPIO pins according to MPP setup, used by machine-setup. + * (/mach-orion/gpio.c). + */ + +void orion5x_gpio_set_valid_pins(u32 pins); +void gpio_display(void); /* debug */ + +/* + * Pull in Orion Ethernet platform_data, used by machine-setup + */ + +struct mv643xx_eth_platform_data; + +void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data); + +/* + * Orion Sata platform_data, used by machine-setup + */ + +struct mv_sata_platform_data; + +void orion5x_sata_init(struct mv_sata_platform_data *sata_data); + +struct machine_desc; +struct meminfo; +struct tag; +extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, + char **, struct meminfo *); + + +#endif diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 5ef44e1a2d36..44c64342dacb 100644 --- a/arch/arm/mach-orion/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/db88f5281-setup.c + * arch/arm/mach-orion5x/db88f5281-setup.c * * Marvell Orion-2 Development Board Setup * * Maintainer: Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -24,8 +24,8 @@ #include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/orion_nand.h> #include "common.h" /***************************************************************************** @@ -241,14 +241,17 @@ void __init db88f5281_pci_preinit(void) static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + /* - * PCIE IRQ is connected internally (not GPIO) + * Check for devices with hard-wired IRQs. */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; /* - * PCI IRQs are connected via GPIOs + * PCI IRQs are connected via GPIOs. */ switch (slot - DB88F5281_PCI_SLOT0_OFFS) { case 0: @@ -265,8 +268,8 @@ static struct hw_pci db88f5281_pci __initdata = { .nr_controllers = 2, .preinit = db88f5281_pci_preinit, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = db88f5281_pci_map_irq, }; @@ -292,9 +295,7 @@ static struct mv643xx_eth_platform_data db88f5281_eth_data = { * RTC DS1339 on I2C bus ****************************************************************************/ static struct i2c_board_info __initdata db88f5281_i2c_rtc = { - .driver_name = "rtc-ds1307", - .type = "ds1339", - .addr = 0x68, + I2C_BOARD_INFO("ds1339", 0x68), }; /***************************************************************************** @@ -312,19 +313,16 @@ static void __init db88f5281_init(void) /* * Basic Orion setup. Need to be called early. */ - orion_init(); + orion5x_init(); /* * Setup the CPU address decode windows for our on-board devices */ - orion_setup_cpu_win(ORION_DEV_BOOT, DB88F5281_NOR_BOOT_BASE, - DB88F5281_NOR_BOOT_SIZE, -1); - orion_setup_cpu_win(ORION_DEV0, DB88F5281_7SEG_BASE, - DB88F5281_7SEG_SIZE, -1); - orion_setup_cpu_win(ORION_DEV1, DB88F5281_NOR_BASE, - DB88F5281_NOR_SIZE, -1); - orion_setup_cpu_win(ORION_DEV2, DB88F5281_NAND_BASE, - DB88F5281_NAND_SIZE, -1); + orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE, + DB88F5281_NOR_BOOT_SIZE); + orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE); + orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE); + orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE); /* * Setup Multiplexing Pins: @@ -340,25 +338,25 @@ static void __init db88f5281_init(void) * MPP18: UART1_CTS MPP19: UART1_RTS * MPP-DEV: DEV_D[16:31] */ - orion_write(MPP_0_7_CTRL, 0x00222203); - orion_write(MPP_8_15_CTRL, 0x44000000); - orion_write(MPP_16_19_CTRL, 0); - orion_write(MPP_DEV_CTRL, 0); + orion5x_write(MPP_0_7_CTRL, 0x00222203); + orion5x_write(MPP_8_15_CTRL, 0x44000000); + orion5x_write(MPP_16_19_CTRL, 0); + orion5x_write(MPP_DEV_CTRL, 0); - orion_gpio_set_valid_pins(0x00003fc3); + orion5x_gpio_set_valid_pins(0x00003fc3); platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs)); i2c_register_board_info(0, &db88f5281_i2c_rtc, 1); - orion_eth_init(&db88f5281_eth_data); + orion5x_eth_init(&db88f5281_eth_data); } MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xfffc, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = db88f5281_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, MACHINE_END diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 076e155ad510..27ce967ab9e5 100644 --- a/arch/arm/mach-orion/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-orion/dns323-setup.c + * arch/arm/mach-orion5x/dns323-setup.c * * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> * @@ -25,8 +25,7 @@ #include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> #include "common.h" #define DNS323_GPIO_LED_RIGHT_AMBER 1 @@ -44,20 +43,25 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - /* PCI-E */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; + int irq; - pr_err("%s: requested mapping for unknown bus\n", __func__); + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + pr_err("%s: requested mapping for unknown device\n", __func__); return -1; } static struct hw_pci dns323_pci __initdata = { - .nr_controllers = 1, + .nr_controllers = 2, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = dns323_pci_map_irq, }; @@ -221,19 +225,16 @@ static struct platform_device *dns323_plat_devices[] __initdata = { static struct i2c_board_info __initdata dns323_i2c_devices[] = { { I2C_BOARD_INFO("g760a", 0x3e), - .type = "g760a", }, #if 0 /* this entry requires the new-style driver model lm75 driver, * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */ { - I2C_BOARD_INFO("lm75", 0x48), - .type = "g751", + I2C_BOARD_INFO("g751", 0x48), }, #endif { - I2C_BOARD_INFO("rtc-m41t80", 0x68), - .type = "m41t80", + I2C_BOARD_INFO("m41t80", 0x68), } }; @@ -247,27 +248,25 @@ static void dns323_power_off(void) static void __init dns323_init(void) { /* Setup basic Orion functions. Need to be called early. */ - orion_init(); + orion5x_init(); /* setup flash mapping * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 */ - orion_setup_cpu_win(ORION_DEV_BOOT, DNS323_NOR_BOOT_BASE, - DNS323_NOR_BOOT_SIZE, -1); + orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); - /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE + /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe * - * Open a special address decode windows for the PCIE WA. + * Open a special address decode windows for the PCIe WA. */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, - (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */ - orion_write(MPP_0_7_CTRL, 0); - orion_write(MPP_8_15_CTRL, 0); - orion_write(MPP_16_19_CTRL, 0); - orion_write(MPP_DEV_CTRL, 0); + orion5x_write(MPP_0_7_CTRL, 0); + orion5x_write(MPP_8_15_CTRL, 0); + orion5x_write(MPP_16_19_CTRL, 0); + orion5x_write(MPP_DEV_CTRL, 0); /* Define used GPIO pins @@ -290,7 +289,7 @@ static void __init dns323_init(void) | 14 | Out | //unknown// | 15 | Out | //unknown// */ - orion_gpio_set_valid_pins(0x07f6); + orion5x_gpio_set_valid_pins(0x07f6); /* register dns323 specific power-off method */ if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0) @@ -306,18 +305,18 @@ static void __init dns323_init(void) i2c_register_board_info(0, dns323_i2c_devices, ARRAY_SIZE(dns323_i2c_devices)); - orion_eth_init(&dns323_eth_data); + orion5x_eth_init(&dns323_eth_data); } /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(DNS323, "D-Link DNS-323") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = dns323_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, .fixup = tag_fixup_mem32, MACHINE_END diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion5x/gpio.c index f713818c66a3..8108c316c426 100644 --- a/arch/arm/mach-orion/gpio.c +++ b/arch/arm/mach-orion5x/gpio.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/gpio.c + * arch/arm/mach-orion5x/gpio.c * * GPIO functions for Marvell Orion System On Chip * * Maintainer: Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -16,14 +16,15 @@ #include <linux/spinlock.h> #include <linux/bitops.h> #include <asm/gpio.h> -#include <asm/arch/orion.h> +#include <asm/io.h> +#include <asm/arch/orion5x.h> #include "common.h" static DEFINE_SPINLOCK(gpio_lock); static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)]; static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ -void __init orion_gpio_set_valid_pins(u32 pins) +void __init orion5x_gpio_set_valid_pins(u32 pins) { gpio_valid[0] = pins; } @@ -49,7 +50,7 @@ int gpio_direction_input(unsigned pin) if (!gpio_label[pin]) gpio_label[pin] = "?"; - orion_setbits(GPIO_IO_CONF, 1 << pin); + orion5x_setbits(GPIO_IO_CONF, 1 << pin); spin_unlock_irqrestore(&gpio_lock, flags); return 0; @@ -76,12 +77,12 @@ int gpio_direction_output(unsigned pin, int value) gpio_label[pin] = "?"; mask = 1 << pin; - orion_clrbits(GPIO_BLINK_EN, mask); + orion5x_clrbits(GPIO_BLINK_EN, mask); if (value) - orion_setbits(GPIO_OUT, mask); + orion5x_setbits(GPIO_OUT, mask); else - orion_clrbits(GPIO_OUT, mask); - orion_clrbits(GPIO_IO_CONF, mask); + orion5x_clrbits(GPIO_OUT, mask); + orion5x_clrbits(GPIO_IO_CONF, mask); spin_unlock_irqrestore(&gpio_lock, flags); return 0; @@ -92,10 +93,10 @@ int gpio_get_value(unsigned pin) { int val, mask = 1 << pin; - if (orion_read(GPIO_IO_CONF) & mask) - val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL); + if (orion5x_read(GPIO_IO_CONF) & mask) + val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL); else - val = orion_read(GPIO_OUT); + val = orion5x_read(GPIO_OUT); return val & mask; } @@ -108,32 +109,32 @@ void gpio_set_value(unsigned pin, int value) spin_lock_irqsave(&gpio_lock, flags); - orion_clrbits(GPIO_BLINK_EN, mask); + orion5x_clrbits(GPIO_BLINK_EN, mask); if (value) - orion_setbits(GPIO_OUT, mask); + orion5x_setbits(GPIO_OUT, mask); else - orion_clrbits(GPIO_OUT, mask); + orion5x_clrbits(GPIO_OUT, mask); spin_unlock_irqrestore(&gpio_lock, flags); } EXPORT_SYMBOL(gpio_set_value); -void orion_gpio_set_blink(unsigned pin, int blink) +void orion5x_gpio_set_blink(unsigned pin, int blink) { unsigned long flags; int mask = 1 << pin; spin_lock_irqsave(&gpio_lock, flags); - orion_clrbits(GPIO_OUT, mask); + orion5x_clrbits(GPIO_OUT, mask); if (blink) - orion_setbits(GPIO_BLINK_EN, mask); + orion5x_setbits(GPIO_BLINK_EN, mask); else - orion_clrbits(GPIO_BLINK_EN, mask); + orion5x_clrbits(GPIO_BLINK_EN, mask); spin_unlock_irqrestore(&gpio_lock, flags); } -EXPORT_SYMBOL(orion_gpio_set_blink); +EXPORT_SYMBOL(orion5x_gpio_set_blink); int gpio_request(unsigned pin, const char *label) { @@ -187,39 +188,39 @@ void gpio_display(void) printk("GPIO, free\n"); } else { printk("GPIO, used by %s, ", gpio_label[i]); - if (orion_read(GPIO_IO_CONF) & (1 << i)) { + if (orion5x_read(GPIO_IO_CONF) & (1 << i)) { printk("input, active %s, level %s, edge %s\n", - ((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high", - ((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked", - ((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked"); + ((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high", + ((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked", + ((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked"); } else { - printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1); + printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1); } } } printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n", - MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL)); + MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL)); printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n", - MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL)); + MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL)); printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n", - MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL)); + MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL)); printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n", - MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL)); + MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL)); printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n", - GPIO_OUT, orion_read(GPIO_OUT)); + GPIO_OUT, orion5x_read(GPIO_OUT)); printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n", - GPIO_IO_CONF, orion_read(GPIO_IO_CONF)); + GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF)); printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n", - GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN)); + GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN)); printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n", - GPIO_IN_POL, orion_read(GPIO_IN_POL)); + GPIO_IN_POL, orion5x_read(GPIO_IN_POL)); printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n", - GPIO_DATA_IN, orion_read(GPIO_DATA_IN)); + GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN)); printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n", - GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK)); + GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK)); printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n", - GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE)); + GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE)); printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n", - GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK)); + GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK)); } diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion5x/irq.c index df7e12ad378b..dd21f38c5d37 100644 --- a/arch/arm/mach-orion/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/irq.c + * arch/arm/mach-orion5x/irq.c * * Core IRQ functions for Marvell Orion System On Chip * * Maintainer: Tzachi Perelstein <tzachi@marvell.com> * * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -14,7 +14,9 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/gpio.h> -#include <asm/arch/orion.h> +#include <asm/io.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/irq.h> #include "common.h" /***************************************************************************** @@ -42,46 +44,46 @@ * polarity LEVEL mask * ****************************************************************************/ -static void orion_gpio_irq_ack(u32 irq) +static void orion5x_gpio_irq_ack(u32 irq) { int pin = irq_to_gpio(irq); if (irq_desc[irq].status & IRQ_LEVEL) /* * Mask bit for level interrupt */ - orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); + orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin); else /* * Clear casue bit for egde interrupt */ - orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin); + orion5x_clrbits(GPIO_EDGE_CAUSE, 1 << pin); } -static void orion_gpio_irq_mask(u32 irq) +static void orion5x_gpio_irq_mask(u32 irq) { int pin = irq_to_gpio(irq); if (irq_desc[irq].status & IRQ_LEVEL) - orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); + orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin); else - orion_clrbits(GPIO_EDGE_MASK, 1 << pin); + orion5x_clrbits(GPIO_EDGE_MASK, 1 << pin); } -static void orion_gpio_irq_unmask(u32 irq) +static void orion5x_gpio_irq_unmask(u32 irq) { int pin = irq_to_gpio(irq); if (irq_desc[irq].status & IRQ_LEVEL) - orion_setbits(GPIO_LEVEL_MASK, 1 << pin); + orion5x_setbits(GPIO_LEVEL_MASK, 1 << pin); else - orion_setbits(GPIO_EDGE_MASK, 1 << pin); + orion5x_setbits(GPIO_EDGE_MASK, 1 << pin); } -static int orion_gpio_set_irq_type(u32 irq, u32 type) +static int orion5x_gpio_set_irq_type(u32 irq, u32 type) { int pin = irq_to_gpio(irq); struct irq_desc *desc; - if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) { - printk(KERN_ERR "orion_gpio_set_irq_type failed " + if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) { + printk(KERN_ERR "orion5x_gpio_set_irq_type failed " "(irq %d, pin %d).\n", irq, pin); return -EINVAL; } @@ -92,22 +94,22 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type) case IRQT_HIGH: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; - orion_clrbits(GPIO_IN_POL, (1 << pin)); + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; case IRQT_LOW: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; - orion_setbits(GPIO_IN_POL, (1 << pin)); + orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; case IRQT_RISING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; - orion_clrbits(GPIO_IN_POL, (1 << pin)); + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; case IRQT_FALLING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; - orion_setbits(GPIO_IN_POL, (1 << pin)); + orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; case IRQT_BOTHEDGE: desc->handle_irq = handle_edge_irq; @@ -115,11 +117,11 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type) /* * set initial polarity based on current input level */ - if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN)) + if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN)) & (1 << pin)) - orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ + orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ else - orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */ + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */ break; default: @@ -133,22 +135,22 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type) return 0; } -static struct irq_chip orion_gpio_irq_chip = { +static struct irq_chip orion5x_gpio_irq_chip = { .name = "Orion-IRQ-GPIO", - .ack = orion_gpio_irq_ack, - .mask = orion_gpio_irq_mask, - .unmask = orion_gpio_irq_unmask, - .set_type = orion_gpio_set_irq_type, + .ack = orion5x_gpio_irq_ack, + .mask = orion5x_gpio_irq_mask, + .unmask = orion5x_gpio_irq_unmask, + .set_type = orion5x_gpio_set_irq_type, }; -static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { u32 cause, offs, pin; - BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31); - offs = (irq - IRQ_ORION_GPIO_0_7) * 8; - cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) | - (orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK)); + BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31); + offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8; + cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) | + (orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK)); for (pin = offs; pin < offs + 8; pin++) { if (cause & (1 << pin)) { @@ -156,16 +158,16 @@ static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) desc = irq_desc + irq; if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { /* Swap polarity (race with GPIO line) */ - u32 polarity = orion_read(GPIO_IN_POL); + u32 polarity = orion5x_read(GPIO_IN_POL); polarity ^= 1 << pin; - orion_write(GPIO_IN_POL, polarity); + orion5x_write(GPIO_IN_POL, polarity); } desc_handle_irq(irq, desc); } } } -static void __init orion_init_gpio_irq(void) +static void __init orion5x_init_gpio_irq(void) { int i; struct irq_desc *desc; @@ -173,69 +175,37 @@ static void __init orion_init_gpio_irq(void) /* * Mask and clear GPIO IRQ interrupts */ - orion_write(GPIO_LEVEL_MASK, 0x0); - orion_write(GPIO_EDGE_MASK, 0x0); - orion_write(GPIO_EDGE_CAUSE, 0x0); + orion5x_write(GPIO_LEVEL_MASK, 0x0); + orion5x_write(GPIO_EDGE_MASK, 0x0); + orion5x_write(GPIO_EDGE_CAUSE, 0x0); /* * Register chained level handlers for GPIO IRQs by default. * User can use set_type() if he wants to use edge types handlers. */ - for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_chip); + for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) { + set_irq_chip(i, &orion5x_gpio_irq_chip); set_irq_handler(i, handle_level_irq); desc = irq_desc + i; desc->status |= IRQ_LEVEL; set_irq_flags(i, IRQF_VALID); } - set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, orion5x_gpio_irq_handler); } /***************************************************************************** * Orion Main IRQ ****************************************************************************/ -static void orion_main_irq_mask(u32 irq) +static void __init orion5x_init_main_irq(void) { - orion_clrbits(MAIN_IRQ_MASK, 1 << irq); + orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); } -static void orion_main_irq_unmask(u32 irq) +void __init orion5x_init_irq(void) { - orion_setbits(MAIN_IRQ_MASK, 1 << irq); -} - -static struct irq_chip orion_main_irq_chip = { - .name = "Orion-IRQ-Main", - .ack = orion_main_irq_mask, - .mask = orion_main_irq_mask, - .unmask = orion_main_irq_unmask, -}; - -static void __init orion_init_main_irq(void) -{ - int i; - - /* - * Mask and clear Main IRQ interrupts - */ - orion_write(MAIN_IRQ_MASK, 0x0); - orion_write(MAIN_IRQ_CAUSE, 0x0); - - /* - * Register level handler for Main IRQs - */ - for (i = 0; i < IRQ_ORION_GPIO_START; i++) { - set_irq_chip(i, &orion_main_irq_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } -} - -void __init orion_init_irq(void) -{ - orion_init_main_irq(); - orion_init_gpio_irq(); + orion5x_init_main_irq(); + orion5x_init_gpio_irq(); } diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 785a07bdf1e2..f5074b877b7f 100644 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -1,10 +1,10 @@ /* - * arch/arm/mach-orion/kurobox_pro-setup.c + * arch/arm/mach-orion5x/kurobox_pro-setup.c * * Maintainer: Ronen Shitrit <rshitrit@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -22,8 +22,8 @@ #include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/orion_nand.h> #include "common.h" /***************************************************************************** @@ -120,22 +120,28 @@ static struct platform_device kurobox_pro_nor_flash = { static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + /* * PCI isn't used on the Kuro */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - else - printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); + printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); return -1; } static struct hw_pci kurobox_pro_pci __initdata = { - .nr_controllers = 1, + .nr_controllers = 2, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = kurobox_pro_pci_map_irq, }; @@ -162,9 +168,7 @@ static struct mv643xx_eth_platform_data kurobox_pro_eth_data = { * RTC 5C372a on I2C bus ****************************************************************************/ static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { - .driver_name = "rtc-rs5c372", - .type = "rs5c372a", - .addr = 0x32, + I2C_BOARD_INFO("rs5c372a", 0x32), }; /***************************************************************************** @@ -178,31 +182,25 @@ static struct mv_sata_platform_data kurobox_pro_sata_data = { * General Setup ****************************************************************************/ -static struct platform_device *kurobox_pro_devices[] __initdata = { - &kurobox_pro_nor_flash, - &kurobox_pro_nand_flash, -}; - static void __init kurobox_pro_init(void) { /* * Setup basic Orion functions. Need to be called early. */ - orion_init(); + orion5x_init(); /* * Setup the CPU address decode windows for our devices */ - orion_setup_cpu_win(ORION_DEV_BOOT, KUROBOX_PRO_NOR_BOOT_BASE, - KUROBOX_PRO_NOR_BOOT_SIZE, -1); - orion_setup_cpu_win(ORION_DEV0, KUROBOX_PRO_NAND_BASE, - KUROBOX_PRO_NAND_SIZE, -1); + orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE, + KUROBOX_PRO_NOR_BOOT_SIZE); + orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE); + /* - * Open a special address decode windows for the PCIE WA. + * Open a special address decode windows for the PCIe WA. */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); /* * Setup Multiplexing Pins -- @@ -219,26 +217,44 @@ static void __init kurobox_pro_init(void) * MPP[15] SATA 1 active indication * MPP[16-19] Not used */ - orion_write(MPP_0_7_CTRL, 0x44220003); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x0); + orion5x_write(MPP_0_7_CTRL, 0x44220003); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x0); - orion_gpio_set_valid_pins(0x0000000c); + orion5x_gpio_set_valid_pins(0x0000000c); - platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices)); + platform_device_register(&kurobox_pro_nor_flash); + if (machine_is_kurobox_pro()) + platform_device_register(&kurobox_pro_nand_flash); i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); - orion_eth_init(&kurobox_pro_eth_data); - orion_sata_init(&kurobox_pro_sata_data); + orion5x_eth_init(&kurobox_pro_eth_data); + orion5x_sata_init(&kurobox_pro_sata_data); } +#ifdef CONFIG_MACH_KUROBOX_PRO MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = kurobox_pro_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_LINKSTATION_PRO +MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") + /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = kurobox_pro_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, .fixup = tag_fixup_mem32, MACHINE_END +#endif diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c new file mode 100644 index 000000000000..9d5d39fa19c3 --- /dev/null +++ b/arch/arm/mach-orion5x/pci.c @@ -0,0 +1,567 @@ +/* + * arch/arm/mach-orion5x/pci.c + * + * PCI and PCIe functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/mbus.h> +#include <asm/mach/pci.h> +#include <asm/plat-orion/pcie.h> +#include "common.h" + +/***************************************************************************** + * Orion has one PCIe controller and one PCI controller. + * + * Note1: The local PCIe bus number is '0'. The local PCI bus number + * follows the scanned PCIe bridged busses, if any. + * + * Note2: It is possible for PCI/PCIe agents to access many subsystem's + * space, by configuring BARs and Address Decode Windows, e.g. flashes on + * device bus, Orion registers, etc. However this code only enable the + * access to DDR banks. + ****************************************************************************/ + + +/***************************************************************************** + * PCIe controller + ****************************************************************************/ +#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE) + +void __init orion5x_pcie_id(u32 *dev, u32 *rev) +{ + *dev = orion_pcie_dev_id(PCIE_BASE); + *rev = orion_pcie_rev(PCIE_BASE); +} + +static int pcie_valid_config(int bus, int dev) +{ + /* + * Don't go out when trying to access -- + * 1. nonexisting device on local bus + * 2. where there's no device connected (no link) + */ + if (bus == 0 && dev == 0) + return 1; + + if (!orion_pcie_link_up(PCIE_BASE)) + return 0; + + if (bus == 0 && dev != 1) + return 0; + + return 1; +} + + +/* + * PCIe config cycles are done by programming the PCIE_CONF_ADDR register + * and then reading the PCIE_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion5x_pcie_lock); + +static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + unsigned long flags; + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + spin_lock_irqsave(&orion5x_pcie_lock, flags); + ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val); + spin_unlock_irqrestore(&orion5x_pcie_lock, flags); + + return ret; +} + +static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * We only support access to the non-extended configuration + * space when using the WA access method (or we would have to + * sacrifice 256M of CPU virtual address space.) + */ + if (where >= 0x100) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE, + bus, devfn, where, size, val); + + return ret; +} + +static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + unsigned long flags; + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&orion5x_pcie_lock, flags); + ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val); + spin_unlock_irqrestore(&orion5x_pcie_lock, flags); + + return ret; +} + +static struct pci_ops pcie_ops = { + .read = pcie_rd_conf, + .write = pcie_wr_conf, +}; + + +static int __init pcie_setup(struct pci_sys_data *sys) +{ + struct resource *res; + int dev; + + /* + * Generic PCIe unit setup. + */ + orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info); + + /* + * Check whether to apply Orion-1/Orion-NAS PCIe config + * read transaction workaround. + */ + dev = orion_pcie_dev_id(PCIE_BASE); + if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { + printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " + "read transaction workaround\n"); + pcie_ops.read = pcie_rd_conf_wa; + } + + /* + * Request resources. + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("pcie_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCIe I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION5X_PCIE_IO_BUS_BASE; + res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCIe IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCIe Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION5X_PCIE_MEM_PHYS_BASE; + res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCIe Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + +/***************************************************************************** + * PCI controller + ****************************************************************************/ +#define PCI_MODE ORION5X_PCI_REG(0xd00) +#define PCI_CMD ORION5X_PCI_REG(0xc00) +#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) +#define PCI_CONF_ADDR ORION5X_PCI_REG(0xc78) +#define PCI_CONF_DATA ORION5X_PCI_REG(0xc7c) + +/* + * PCI_MODE bits + */ +#define PCI_MODE_64BIT (1 << 2) +#define PCI_MODE_PCIX ((1 << 4) | (1 << 5)) + +/* + * PCI_CMD bits + */ +#define PCI_CMD_HOST_REORDER (1 << 29) + +/* + * PCI_P2P_CONF bits + */ +#define PCI_P2P_BUS_OFFS 16 +#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS) +#define PCI_P2P_DEV_OFFS 24 +#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS) + +/* + * PCI_CONF_ADDR bits + */ +#define PCI_CONF_REG(reg) ((reg) & 0xfc) +#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8) +#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11) +#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16) +#define PCI_CONF_ADDR_EN (1 << 31) + +/* + * Internal configuration space + */ +#define PCI_CONF_FUNC_STAT_CMD 0 +#define PCI_CONF_REG_STAT_CMD 4 +#define PCIX_STAT 0x64 +#define PCIX_STAT_BUS_OFFS 8 +#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS) + +/* + * PCI Address Decode Windows registers + */ +#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc08) : \ + ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \ + ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \ + ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0) +#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION5X_PCI_REG(0xc48) : \ + ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \ + ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \ + ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0) +#define PCI_BAR_ENABLE ORION5X_PCI_REG(0xc3c) +#define PCI_ADDR_DECODE_CTRL ORION5X_PCI_REG(0xd3c) + +/* + * PCI configuration helpers for BAR settings + */ +#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) +#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) +#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) + +/* + * PCI config cycles are done by programming the PCI_CONF_ADDR register + * and then reading the PCI_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion5x_pci_lock); + +static int orion5x_pci_local_bus_nr(void) +{ + u32 conf = orion5x_read(PCI_P2P_CONF); + return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); +} + +static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func, + u32 where, u32 size, u32 *val) +{ + unsigned long flags; + spin_lock_irqsave(&orion5x_pci_lock, flags); + + orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + *val = orion5x_read(PCI_CONF_DATA); + + if (size == 1) + *val = (*val >> (8*(where & 0x3))) & 0xff; + else if (size == 2) + *val = (*val >> (8*(where & 0x3))) & 0xffff; + + spin_unlock_irqrestore(&orion5x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func, + u32 where, u32 size, u32 val) +{ + unsigned long flags; + int ret = PCIBIOS_SUCCESSFUL; + + spin_lock_irqsave(&orion5x_pci_lock, flags); + + orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + if (size == 4) { + __raw_writel(val, PCI_CONF_DATA); + } else if (size == 2) { + __raw_writew(val, PCI_CONF_DATA + (where & 0x3)); + } else if (size == 1) { + __raw_writeb(val, PCI_CONF_DATA + (where & 0x3)); + } else { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + } + + spin_unlock_irqrestore(&orion5x_pci_lock, flags); + + return ret; +} + +static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + /* + * Don't go out for local device + */ + if (bus->number == orion5x_pci_local_bus_nr() && + PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return orion5x_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + if (bus->number == orion5x_pci_local_bus_nr() && + PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +static struct pci_ops pci_ops = { + .read = orion5x_pci_rd_conf, + .write = orion5x_pci_wr_conf, +}; + +static void __init orion5x_pci_set_bus_nr(int nr) +{ + u32 p2p = orion5x_read(PCI_P2P_CONF); + + if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) { + /* + * PCI-X mode + */ + u32 pcix_status, bus, dev; + bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS; + dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS; + orion5x_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status); + pcix_status &= ~PCIX_STAT_BUS_MASK; + pcix_status |= (nr << PCIX_STAT_BUS_OFFS); + orion5x_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status); + } else { + /* + * PCI Conventional mode + */ + p2p &= ~PCI_P2P_BUS_MASK; + p2p |= (nr << PCI_P2P_BUS_OFFS); + orion5x_write(PCI_P2P_CONF, p2p); + } +} + +static void __init orion5x_pci_master_slave_enable(void) +{ + int bus_nr, func, reg; + u32 val; + + bus_nr = orion5x_pci_local_bus_nr(); + func = PCI_CONF_FUNC_STAT_CMD; + reg = PCI_CONF_REG_STAT_CMD; + orion5x_pci_hw_rd_conf(bus_nr, 0, func, reg, 4, &val); + val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7); +} + +static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) +{ + u32 win_enable; + int bus; + int i; + + /* + * First, disable windows. + */ + win_enable = 0xffffffff; + orion5x_write(PCI_BAR_ENABLE, win_enable); + + /* + * Setup windows for DDR banks. + */ + bus = orion5x_pci_local_bus_nr(); + + for (i = 0; i < dram->num_cs; i++) { + struct mbus_dram_window *cs = dram->cs + i; + u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index); + u32 reg; + u32 val; + + /* + * Write DRAM bank base address register. + */ + reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index); + orion5x_pci_hw_rd_conf(bus, 0, func, reg, 4, &val); + val = (cs->base & 0xfffff000) | (val & 0xfff); + orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, val); + + /* + * Write DRAM bank size register. + */ + reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index); + orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0); + orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index), + (cs->size - 1) & 0xfffff000); + orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index), + cs->base & 0xfffff000); + + /* + * Enable decode window for this chip select. + */ + win_enable &= ~(1 << cs->cs_index); + } + + /* + * Re-enable decode windows. + */ + orion5x_write(PCI_BAR_ENABLE, win_enable); + + /* + * Disable automatic update of address remaping when writing to BARs. + */ + orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1); +} + +static int __init pci_setup(struct pci_sys_data *sys) +{ + struct resource *res; + + /* + * Point PCI unit MBUS decode windows to DRAM space. + */ + orion5x_setup_pci_wins(&orion5x_mbus_dram_info); + + /* + * Master + Slave enable + */ + orion5x_pci_master_slave_enable(); + + /* + * Force ordering + */ + orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); + + /* + * Request resources + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("pci_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION5X_PCI_IO_BUS_BASE; + res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCI IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION5X_PCI_MEM_PHYS_BASE; + res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCI Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + + +/***************************************************************************** + * General PCIe + PCI + ****************************************************************************/ +static void __devinit rc_pci_fixup(struct pci_dev *dev) +{ + /* + * Prevent enumeration of root complex. + */ + if (dev->bus->parent == NULL && dev->devfn == 0) { + int i; + + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); + +int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + + if (nr == 0) { + orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); + ret = pcie_setup(sys); + } else if (nr == 1) { + orion5x_pci_set_bus_nr(sys->busnr); + ret = pci_setup(sys); + } + + return ret; +} + +struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct pci_bus *bus; + + if (nr == 0) { + bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + } else if (nr == 1) { + bus = pci_scan_bus(sys->busnr, &pci_ops, sys); + } else { + bus = NULL; + BUG(); + } + + return bus; +} + +int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int bus = dev->bus->number; + + /* + * PCIe endpoint? + */ + if (bus < orion5x_pci_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + return -1; +} diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index e851b8ca5ac6..81abc1003aae 100644 --- a/arch/arm/mach-orion/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/rd88f5182-setup.c + * arch/arm/mach-orion5x/rd88f5182-setup.c * * Marvell Orion-NAS Reference Design Setup * * Maintainer: Ronen Shitrit <rshitrit@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -24,8 +24,7 @@ #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> #include "common.h" /***************************************************************************** @@ -173,11 +172,14 @@ void __init rd88f5182_pci_preinit(void) static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + /* - * PCI-E isn't used on the RD2 + * Check for devices with hard-wired IRQs. */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; /* * PCI IRQs are connected via GPIOs @@ -197,8 +199,8 @@ static struct hw_pci rd88f5182_pci __initdata = { .nr_controllers = 2, .preinit = rd88f5182_pci_preinit, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = rd88f5182_pci_map_irq, }; @@ -225,9 +227,7 @@ static struct mv643xx_eth_platform_data rd88f5182_eth_data = { * RTC DS1338 on I2C bus ****************************************************************************/ static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { - .driver_name = "rtc-ds1307", - .type = "ds1338", - .addr = 0x68, + I2C_BOARD_INFO("ds1338", 0x68), }; /***************************************************************************** @@ -250,22 +250,20 @@ static void __init rd88f5182_init(void) /* * Setup basic Orion functions. Need to be called early. */ - orion_init(); + orion5x_init(); /* * Setup the CPU address decode windows for our devices */ - orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE, - RD88F5182_NOR_BOOT_SIZE, -1); - orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE, - RD88F5182_NOR_SIZE, -1); + orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, + RD88F5182_NOR_BOOT_SIZE); + orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); /* - * Open a special address decode windows for the PCIE WA. + * Open a special address decode windows for the PCIe WA. */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); /* * Setup Multiplexing Pins -- @@ -291,25 +289,25 @@ static void __init rd88f5182_init(void) * MPP[25] USB 0 over current enable */ - orion_write(MPP_0_7_CTRL, 0x00000003); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x5555); + orion5x_write(MPP_0_7_CTRL, 0x00000003); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x5555); - orion_gpio_set_valid_pins(0x000000fb); + orion5x_gpio_set_valid_pins(0x000000fb); platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); - orion_eth_init(&rd88f5182_eth_data); - orion_sata_init(&rd88f5182_sata_data); + orion5x_eth_init(&rd88f5182_eth_data); + orion5x_sata_init(&rd88f5182_sata_data); } MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f5182_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, MACHINE_END diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 45764dad16d0..9afb41ee6e07 100644 --- a/arch/arm/mach-orion/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -26,8 +26,7 @@ #include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> #include "common.h" #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 @@ -142,14 +141,17 @@ void __init qnap_ts209_pci_preinit(void) static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + /* - * PCIE IRQ is connected internally (not GPIO) + * Check for devices with hard-wired IRQs. */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; /* - * PCI IRQs are connected via GPIOs + * PCI IRQs are connected via GPIOs. */ switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { case 0: @@ -165,8 +167,8 @@ static struct hw_pci qnap_ts209_pci __initdata = { .nr_controllers = 2, .preinit = qnap_ts209_pci_preinit, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = qnap_ts209_pci_map_irq, }; @@ -189,6 +191,87 @@ static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { .force_phy_addr = 1, }; +static int __init parse_hex_nibble(char n) +{ + if (n >= '0' && n <= '9') + return n - '0'; + + if (n >= 'A' && n <= 'F') + return n - 'A' + 10; + + if (n >= 'a' && n <= 'f') + return n - 'a' + 10; + + return -1; +} + +static int __init parse_hex_byte(const char *b) +{ + int hi; + int lo; + + hi = parse_hex_nibble(b[0]); + lo = parse_hex_nibble(b[1]); + + if (hi < 0 || lo < 0) + return -1; + + return (hi << 4) | lo; +} + +static int __init check_mac_addr(const char *addr_str) +{ + u_int8_t addr[6]; + int i; + + for (i = 0; i < 6; i++) { + int byte; + + /* + * Enforce "xx:xx:xx:xx:xx:xx\n" format. + */ + if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n')) + return -1; + + byte = parse_hex_byte(addr_str + (i * 3)); + if (byte < 0) + return -1; + addr[i] = byte; + } + + printk(KERN_INFO "ts209: found ethernet mac address "); + for (i = 0; i < 6; i++) + printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); + + memcpy(qnap_ts209_eth_data.mac_addr, addr, 6); + + return 0; +} + +/* + * The 'NAS Config' flash partition has an ext2 filesystem which + * contains a file that has the ethernet MAC address in plain text + * (format "xx:xx:xx:xx:xx:xx\n".) + */ +static void __init ts209_find_mac_addr(void) +{ + unsigned long addr; + + for (addr = 0x00700000; addr < 0x00760000; addr += 1024) { + char *nor_page; + int ret = 0; + + nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024); + if (nor_page != NULL) { + ret = check_mac_addr(nor_page); + iounmap(nor_page); + } + + if (ret == 0) + break; + } +} + /***************************************************************************** * RTC S35390A on I2C bus ****************************************************************************/ @@ -196,8 +279,7 @@ static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { #define TS209_RTC_GPIO 3 static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { - .driver_name = "rtc-s35390a", - .addr = 0x30, + I2C_BOARD_INFO("s35390a", 0x30), .irq = 0, }; @@ -262,21 +344,21 @@ static struct platform_device *qnap_ts209_devices[] __initdata = { static void qnap_ts209_power_off(void) { /* 19200 baud divisor */ - const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200)); + const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200)); pr_info("%s: triggering power-off...\n", __func__); /* hijack uart1 and reset into sane state (19200,8n1) */ - orion_write(UART1_REG(LCR), 0x83); - orion_write(UART1_REG(DLL), divisor & 0xff); - orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff); - orion_write(UART1_REG(LCR), 0x03); - orion_write(UART1_REG(IER), 0x00); - orion_write(UART1_REG(FCR), 0x00); - orion_write(UART1_REG(MCR), 0x00); + orion5x_write(UART1_REG(LCR), 0x83); + orion5x_write(UART1_REG(DLL), divisor & 0xff); + orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff); + orion5x_write(UART1_REG(LCR), 0x03); + orion5x_write(UART1_REG(IER), 0x00); + orion5x_write(UART1_REG(FCR), 0x00); + orion5x_write(UART1_REG(MCR), 0x00); /* send the power-off command 'A' to PIC */ - orion_write(UART1_REG(TX), 'A'); + orion5x_write(UART1_REG(TX), 'A'); } static void __init qnap_ts209_init(void) @@ -284,20 +366,19 @@ static void __init qnap_ts209_init(void) /* * Setup basic Orion functions. Need to be called early. */ - orion_init(); + orion5x_init(); /* * Setup flash mapping */ - orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE, -1); + orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, + QNAP_TS209_NOR_BOOT_SIZE); /* - * Open a special address decode windows for the PCIE WA. + * Open a special address decode windows for the PCIe WA. */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); /* * Setup Multiplexing Pins -- @@ -322,10 +403,10 @@ static void __init qnap_ts209_init(void) * MPP[22] USB 0 over current * MPP[23-25] Reserved */ - orion_write(MPP_0_7_CTRL, 0x3); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x5500); - orion_gpio_set_valid_pins(0x3cc0fff); + orion5x_write(MPP_0_7_CTRL, 0x3); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x5500); + orion5x_gpio_set_valid_pins(0x3cc0fff); /* register ts209 specific power-off method */ pm_power_off = qnap_ts209_power_off; @@ -344,18 +425,20 @@ static void __init qnap_ts209_init(void) pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); - orion_eth_init(&qnap_ts209_eth_data); - orion_sata_init(&qnap_ts209_sata_data); + ts209_find_mac_addr(); + orion5x_eth_init(&qnap_ts209_eth_data); + + orion5x_sata_init(&qnap_ts209_sata_data); } MACHINE_START(TS209, "QNAP TS-109/TS-209") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = qnap_ts209_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, .fixup = tag_fixup_mem32, MACHINE_END diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index 8e00ed43fb95..a5268c3ac5a7 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -21,7 +21,6 @@ #include <linux/err.h> #include <linux/delay.h> -#include <asm/semaphore.h> #include <asm/hardware.h> #include <asm/io.h> diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c index 1ab84ced7b5a..ef179cab80e2 100644 --- a/arch/arm/mach-pnx4008/gpio.c +++ b/arch/arm/mach-pnx4008/gpio.c @@ -17,7 +17,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/module.h> -#include <asm/semaphore.h> #include <asm/io.h> #include <asm/arch/platform.h> #include <asm/arch/gpio.h> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 0908bea0f609..5da7a6820492 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -23,6 +23,12 @@ endif choice prompt "Select target board" +config ARCH_GUMSTIX + bool "Gumstix XScale boards" + help + Say Y here if you intend to run this kernel on a + Gumstix Full Function Minature Computer. + config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x @@ -160,6 +166,20 @@ endchoice endif +if ARCH_GUMSTIX + +choice + prompt "Select target Gumstix board" + +config MACH_GUMSTIX_F + bool "Basix, Connex, ws-200ax, ws-400ax systems" + select PXA25x + +endchoice + +endif + + if MACH_TRIZEPS4 choice diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 6e0c4f5b5ae6..0e6d05bb81aa 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -5,13 +5,21 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o dma.o \ time.o gpio.o -obj-$(CONFIG_PXA25x) += pxa25x.o -obj-$(CONFIG_PXA27x) += pxa27x.o -obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o smemc.o +obj-$(CONFIG_PM) += pm.o sleep.o standby.o +obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o + +# Generic drivers that other drivers may depend upon +obj-$(CONFIG_PXA_SSP) += ssp.o + +# SoC-specific code +obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o +obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa27x.o +obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o # Specific board support +obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o @@ -47,11 +55,6 @@ led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o obj-$(CONFIG_LEDS) += $(led-y) -# Misc features -obj-$(CONFIG_PM) += pm.o sleep.o standby.o -obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o -obj-$(CONFIG_PXA_SSP) += ssp.o - ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o endif diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index df5ae2710ab1..e97dc59813c8 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -13,6 +13,7 @@ #include <linux/delay.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/hardware.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index fcda7d5cb693..ac7f05f9f3eb 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -23,6 +23,7 @@ #include <asm/mach/pci.h> #include <asm/arch/cm-x270.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/mach-types.h> #include <asm/hardware/it8152.h> diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index ecdbc96a4de1..f5851d1adc25 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -30,6 +30,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/pxafb.h> #include <asm/arch/ohci.h> #include <asm/arch/mmc.h> @@ -58,7 +59,7 @@ static struct resource cmx270_dm9k_resource[] = { [2] = { .start = CMX270_ETHIRQ, .end = CMX270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c index 6db54e31c397..574839d7c132 100644 --- a/arch/arm/mach-pxa/colibri.c +++ b/arch/arm/mach-pxa/colibri.c @@ -29,6 +29,7 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/colibri.h> #include "generic.h" @@ -97,7 +98,7 @@ static struct resource dm9000_resources[] = { [2] = { .start = COLIBRI_ETH_IRQ, .end = COLIBRI_ETH_IRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, }, }; @@ -118,7 +119,6 @@ static void __init colibri_init(void) /* DM9000 LAN */ pxa_gpio_mode(GPIO78_nCS_2_MD); pxa_gpio_mode(GPIO_DM9000 | GPIO_IN); - set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING); platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices)); } diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 9292576b83b3..b757dd756655 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -36,6 +36,7 @@ #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/irda.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> @@ -492,8 +493,6 @@ static struct platform_device *devices[] __initdata = { static void corgi_poweroff(void) { - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; - if (!machine_is_corgi()) /* Green LED off tells the bootloader to halt */ reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN); @@ -502,8 +501,6 @@ static void corgi_poweroff(void) static void corgi_restart(char mode) { - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; - if (!machine_is_corgi()) /* Green LED on tells the bootloader to reboot */ set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN); diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 392c38717362..0a85f706e887 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -26,6 +26,7 @@ #include <asm/arch/sharpsl.h> #include <asm/arch/corgi.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 31706224a04c..eccc45d21f75 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -21,6 +21,7 @@ #include <asm/arch/ssp.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/regs-ssp.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c index 4b21479332ae..fb9ba1ab2826 100644 --- a/arch/arm/mach-pxa/cpu-pxa.c +++ b/arch/arm/mach-pxa/cpu-pxa.c @@ -49,125 +49,216 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); #define freq_debug 0 #endif +static unsigned int pxa27x_maxfreq; +module_param(pxa27x_maxfreq, uint, 0); +MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz" + "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)"); + typedef struct { unsigned int khz; unsigned int membus; unsigned int cccr; unsigned int div2; + unsigned int cclkcfg; } pxa_freqs_t; /* Define the refresh period in mSec for the SDRAM and the number of rows */ -#define SDRAM_TREF 64 /* standard 64ms SDRAM */ -#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */ -#define MDREFR_DRI(x) (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32)) - -#define CCLKCFG_TURBO 0x1 -#define CCLKCFG_FCS 0x2 -#define PXA25x_MIN_FREQ 99500 -#define PXA25x_MAX_FREQ 398100 -#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) -#define MDREFR_DRI_MASK 0xFFF +#define SDRAM_TREF 64 /* standard 64ms SDRAM */ +#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */ +#define CCLKCFG_TURBO 0x1 +#define CCLKCFG_FCS 0x2 +#define CCLKCFG_HALFTURBO 0x4 +#define CCLKCFG_FASTBUS 0x8 +#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) +#define MDREFR_DRI_MASK 0xFFF +/* + * PXA255 definitions + */ /* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */ +#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS + static pxa_freqs_t pxa255_run_freqs[] = { - /* CPU MEMBUS CCCR DIV2*/ - { 99500, 99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */ - {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */ - {199100, 99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */ - {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */ - {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */ - {398100, 99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */ - {0,} + /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ + { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */ + {132700, 132700, 0x123, 1, CCLKCFG}, /* 133, 133, 66, 66 */ + {199100, 99500, 0x141, 0, CCLKCFG}, /* 199, 199, 99, 99 */ + {265400, 132700, 0x143, 1, CCLKCFG}, /* 265, 265, 133, 66 */ + {331800, 165900, 0x145, 1, CCLKCFG}, /* 331, 331, 166, 83 */ + {398100, 99500, 0x161, 0, CCLKCFG}, /* 398, 398, 196, 99 */ }; -#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) - -static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1]; /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ static pxa_freqs_t pxa255_turbo_freqs[] = { - /* CPU MEMBUS CCCR DIV2*/ - { 99500, 99500, 0x121, 1}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */ - {199100, 99500, 0x221, 0}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */ - {298500, 99500, 0x321, 0}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */ - {298600, 99500, 0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */ - {398100, 99500, 0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */ - {0,} + /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ + { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */ + {199100, 99500, 0x221, 0, CCLKCFG}, /* 99, 199, 50, 99 */ + {298500, 99500, 0x321, 0, CCLKCFG}, /* 99, 287, 50, 99 */ + {298600, 99500, 0x1c1, 0, CCLKCFG}, /* 199, 287, 99, 99 */ + {398100, 99500, 0x241, 0, CCLKCFG}, /* 199, 398, 99, 99 */ +}; + +#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) +#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) + +static struct cpufreq_frequency_table + pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1]; +static struct cpufreq_frequency_table + pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1]; + +/* + * PXA270 definitions + * + * For the PXA27x: + * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG. + * + * A = 0 => memory controller clock from table 3-7, + * A = 1 => memory controller clock = system bus clock + * Run mode frequency = 13 MHz * L + * Turbo mode frequency = 13 MHz * L * N + * System bus frequency = 13 MHz * L / (B + 1) + * + * In CCCR: + * A = 1 + * L = 16 oscillator to run mode ratio + * 2N = 6 2 * (turbo mode to run mode ratio) + * + * In CCLKCFG: + * B = 1 Fast bus mode + * HT = 0 Half-Turbo mode + * T = 1 Turbo mode + * + * For now, just support some of the combinations in table 3-7 of + * PXA27x Processor Family Developer's Manual to simplify frequency + * change sequences. + */ +#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L) +#define CCLKCFG2(B, HT, T) \ + (CCLKCFG_FCS | \ + ((B) ? CCLKCFG_FASTBUS : 0) | \ + ((HT) ? CCLKCFG_HALFTURBO : 0) | \ + ((T) ? CCLKCFG_TURBO : 0)) + +static pxa_freqs_t pxa27x_freqs[] = { + {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1)}, + {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1)}, + {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)}, + {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)}, + {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)}, + {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)}, + {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)} }; -#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) -static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1]; +#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs) +static struct cpufreq_frequency_table + pxa27x_freq_table[NUM_PXA27x_FREQS+1]; extern unsigned get_clk_frequency_khz(int info); +static void find_freq_tables(struct cpufreq_policy *policy, + struct cpufreq_frequency_table **freq_table, + pxa_freqs_t **pxa_freqs) +{ + if (cpu_is_pxa25x()) { + if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { + *pxa_freqs = pxa255_run_freqs; + *freq_table = pxa255_run_freq_table; + } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) { + *pxa_freqs = pxa255_turbo_freqs; + *freq_table = pxa255_turbo_freq_table; + } else { + printk("CPU PXA: Unknown policy found. " + "Using CPUFREQ_POLICY_PERFORMANCE\n"); + *pxa_freqs = pxa255_run_freqs; + *freq_table = pxa255_run_freq_table; + } + } + if (cpu_is_pxa27x()) { + *pxa_freqs = pxa27x_freqs; + *freq_table = pxa27x_freq_table; + } +} + +static void pxa27x_guess_max_freq(void) +{ + if (!pxa27x_maxfreq) { + pxa27x_maxfreq = 416000; + printk(KERN_INFO "PXA CPU 27x max frequency not defined " + "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", + pxa27x_maxfreq); + } else { + pxa27x_maxfreq *= 1000; + } +} + +static u32 mdrefr_dri(unsigned int freq) +{ + u32 dri = 0; + + if (cpu_is_pxa25x()) + dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32)); + if (cpu_is_pxa27x()) + dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32; + return dri; +} + /* find a valid frequency point */ static int pxa_verify_policy(struct cpufreq_policy *policy) { struct cpufreq_frequency_table *pxa_freqs_table; + pxa_freqs_t *pxa_freqs; int ret; - if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { - pxa_freqs_table = pxa255_run_freq_table; - } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) { - pxa_freqs_table = pxa255_turbo_freq_table; - } else { - printk("CPU PXA: Unknown policy found. " - "Using CPUFREQ_POLICY_PERFORMANCE\n"); - pxa_freqs_table = pxa255_run_freq_table; - } - + find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs); ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table); if (freq_debug) pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n", - policy->min, policy->max); + policy->min, policy->max); return ret; } +static unsigned int pxa_cpufreq_get(unsigned int cpu) +{ + return get_clk_frequency_khz(0); +} + static int pxa_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int target_freq, + unsigned int relation) { struct cpufreq_frequency_table *pxa_freqs_table; pxa_freqs_t *pxa_freq_settings; struct cpufreq_freqs freqs; unsigned int idx; unsigned long flags; - unsigned int unused, preset_mdrefr, postset_mdrefr; - void *ramstart = phys_to_virt(0xa0000000); + unsigned int new_freq_cpu, new_freq_mem; + unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg; /* Get the current policy */ - if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { - pxa_freq_settings = pxa255_run_freqs; - pxa_freqs_table = pxa255_run_freq_table; - } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) { - pxa_freq_settings = pxa255_turbo_freqs; - pxa_freqs_table = pxa255_turbo_freq_table; - } else { - printk("CPU PXA: Unknown policy found. " - "Using CPUFREQ_POLICY_PERFORMANCE\n"); - pxa_freq_settings = pxa255_run_freqs; - pxa_freqs_table = pxa255_run_freq_table; - } + find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings); /* Lookup the next frequency */ if (cpufreq_frequency_table_target(policy, pxa_freqs_table, - target_freq, relation, &idx)) { + target_freq, relation, &idx)) { return -EINVAL; } + new_freq_cpu = pxa_freq_settings[idx].khz; + new_freq_mem = pxa_freq_settings[idx].membus; freqs.old = policy->cur; - freqs.new = pxa_freq_settings[idx].khz; + freqs.new = new_freq_cpu; freqs.cpu = policy->cpu; if (freq_debug) - pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n", - freqs.new / 1000, (pxa_freq_settings[idx].div2) ? - (pxa_freq_settings[idx].membus / 2000) : - (pxa_freq_settings[idx].membus / 1000)); + pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, " + "(SDRAM %d Mhz)\n", + freqs.new / 1000, (pxa_freq_settings[idx].div2) ? + (new_freq_mem / 2000) : (new_freq_mem / 1000)); /* * Tell everyone what we're about to do... @@ -177,16 +268,16 @@ static int pxa_set_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* Calculate the next MDREFR. If we're slowing down the SDRAM clock - * we need to preset the smaller DRI before the change. If we're speeding - * up we need to set the larger DRI value after the change. + * we need to preset the smaller DRI before the change. If we're + * speeding up we need to set the larger DRI value after the change. */ preset_mdrefr = postset_mdrefr = MDREFR; - if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) { - preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) | - MDREFR_DRI(pxa_freq_settings[idx].membus); + if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) { + preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK); + preset_mdrefr |= mdrefr_dri(new_freq_mem); } - postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) | - MDREFR_DRI(pxa_freq_settings[idx].membus); + postset_mdrefr = + (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem); /* If we're dividing the memory clock by two for the SDRAM clock, this * must be set prior to the change. Clearing the divide must be done @@ -201,26 +292,27 @@ static int pxa_set_target(struct cpufreq_policy *policy, local_irq_save(flags); - /* Set new the CCCR */ + /* Set new the CCCR and prepare CCLKCFG */ CCCR = pxa_freq_settings[idx].cccr; + cclkcfg = pxa_freq_settings[idx].cclkcfg; asm volatile(" \n\ ldr r4, [%1] /* load MDREFR */ \n\ b 2f \n\ - .align 5 \n\ + .align 5 \n\ 1: \n\ - str %4, [%1] /* preset the MDREFR */ \n\ + str %3, [%1] /* preset the MDREFR */ \n\ mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\ - str %5, [%1] /* postset the MDREFR */ \n\ + str %4, [%1] /* postset the MDREFR */ \n\ \n\ b 3f \n\ 2: b 1b \n\ 3: nop \n\ " - : "=&r" (unused) - : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart), - "r" (preset_mdrefr), "r" (postset_mdrefr) - : "r4", "r5"); + : "=&r" (unused) + : "r" (&MDREFR), "r" (cclkcfg), + "r" (preset_mdrefr), "r" (postset_mdrefr) + : "r4", "r5"); local_irq_restore(flags); /* @@ -233,38 +325,57 @@ static int pxa_set_target(struct cpufreq_policy *policy, return 0; } -static unsigned int pxa_cpufreq_get(unsigned int cpu) -{ - return get_clk_frequency_khz(0); -} - -static int pxa_cpufreq_init(struct cpufreq_policy *policy) +static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) { int i; + unsigned int freq; + + /* try to guess pxa27x cpu */ + if (cpu_is_pxa27x()) + pxa27x_guess_max_freq(); /* set default policy and cpuinfo */ policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->policy = CPUFREQ_POLICY_PERFORMANCE; - policy->cpuinfo.max_freq = PXA25x_MAX_FREQ; - policy->cpuinfo.min_freq = PXA25x_MIN_FREQ; + if (cpu_is_pxa25x()) + policy->policy = CPUFREQ_POLICY_PERFORMANCE; policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->cur = get_clk_frequency_khz(0); /* current freq */ + policy->cur = get_clk_frequency_khz(0); /* current freq */ policy->min = policy->max = policy->cur; - /* Generate the run cpufreq_frequency_table struct */ - for (i = 0; i < NUM_RUN_FREQS; i++) { + /* Generate pxa25x the run cpufreq_frequency_table struct */ + for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; pxa255_run_freq_table[i].index = i; } - pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; - /* Generate the turbo cpufreq_frequency_table struct */ - for (i = 0; i < NUM_TURBO_FREQS; i++) { - pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz; + + /* Generate pxa25x the turbo cpufreq_frequency_table struct */ + for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { + pxa255_turbo_freq_table[i].frequency = + pxa255_turbo_freqs[i].khz; pxa255_turbo_freq_table[i].index = i; } pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; + /* Generate the pxa27x cpufreq_frequency_table struct */ + for (i = 0; i < NUM_PXA27x_FREQS; i++) { + freq = pxa27x_freqs[i].khz; + if (freq > pxa27x_maxfreq) + break; + pxa27x_freq_table[i].frequency = freq; + pxa27x_freq_table[i].index = i; + } + pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; + + /* + * Set the policy's minimum and maximum frequencies from the tables + * just constructed. This sets cpuinfo.mxx_freq, min and max. + */ + if (cpu_is_pxa25x()) + cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table); + else if (cpu_is_pxa27x()) + cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table); + printk(KERN_INFO "PXA CPU frequency change support initialized\n"); return 0; @@ -275,26 +386,25 @@ static struct cpufreq_driver pxa_cpufreq_driver = { .target = pxa_set_target, .init = pxa_cpufreq_init, .get = pxa_cpufreq_get, - .name = "PXA25x", + .name = "PXA2xx", }; static int __init pxa_cpu_init(void) { int ret = -ENODEV; - if (cpu_is_pxa25x()) + if (cpu_is_pxa25x() || cpu_is_pxa27x()) ret = cpufreq_register_driver(&pxa_cpufreq_driver); return ret; } static void __exit pxa_cpu_exit(void) { - if (cpu_is_pxa25x()) - cpufreq_unregister_driver(&pxa_cpufreq_driver); + cpufreq_unregister_driver(&pxa_cpufreq_driver); } -MODULE_AUTHOR ("Intrinsyc Software Inc."); -MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture"); +MODULE_AUTHOR("Intrinsyc Software Inc."); +MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture"); MODULE_LICENSE("GPL"); module_init(pxa_cpu_init); module_exit(pxa_cpu_exit); diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index bfccb80ac8ef..d6c05b6eab35 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -11,6 +11,8 @@ #include <asm/arch/irda.h> #include <asm/arch/i2c.h> #include <asm/arch/ohci.h> +#include <asm/arch/pxa27x_keypad.h> +#include <asm/arch/camera.h> #include "devices.h" @@ -396,6 +398,31 @@ struct platform_device pxa25x_device_assp = { #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +static struct resource pxa27x_resource_keypad[] = { + [0] = { + .start = 0x41500000, + .end = 0x4150004c, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_KEYPAD, + .end = IRQ_KEYPAD, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa27x_device_keypad = { + .name = "pxa27x-keypad", + .id = -1, + .resource = pxa27x_resource_keypad, + .num_resources = ARRAY_SIZE(pxa27x_resource_keypad), +}; + +void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info) +{ + pxa_register_device(&pxa27x_device_keypad, info); +} + static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32); static struct resource pxa27x_resource_ohci[] = { @@ -540,6 +567,37 @@ struct platform_device pxa27x_device_ssp3 = { .resource = pxa27x_resource_ssp3, .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3), }; + +static struct resource pxa27x_resource_camera[] = { + [0] = { + .start = 0x50000000, + .end = 0x50000fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CAMERA, + .end = IRQ_CAMERA, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32); + +static struct platform_device pxa27x_device_camera = { + .name = "pxa27x-camera", + .id = 0, /* This is used to put cameras on this interface */ + .dev = { + .dma_mask = &pxa27x_dma_mask_camera, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxa27x_resource_camera), + .resource = pxa27x_resource_camera, +}; + +void __init pxa_set_camera_info(struct pxacamera_platform_data *info) +{ + pxa_register_device(&pxa27x_device_camera, info); +} #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ #ifdef CONFIG_PXA3xx diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 96c7c8909068..fcab017f27ee 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -14,6 +14,7 @@ extern struct platform_device pxa_device_rtc; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; +extern struct platform_device pxa27x_device_keypad; extern struct platform_device pxa25x_device_ssp; extern struct platform_device pxa25x_device_nssp; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 3bb31314429a..9c57700ee5c2 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -23,6 +23,7 @@ #include <asm/mach/arch.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/pxafb.h> #include <asm/arch/ohci.h> #include <asm/arch/mmc.h> @@ -49,7 +50,7 @@ static struct resource em_x270_dm9k_resource[] = { [2] = { .start = EM_X270_ETHIRQ, .end = EM_X270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 80721c610d41..44617938f3f1 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -19,14 +19,8 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/pm.h> -#include <linux/string.h> -#include <linux/sysdev.h> #include <asm/hardware.h> -#include <asm/irq.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/mach/map.h> @@ -96,11 +90,6 @@ static struct map_desc standard_io_desc[] __initdata = { .pfn = __phys_to_pfn(0x40000000), .length = 0x02000000, .type = MT_DEVICE - }, { /* LCD */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(0x44000000), - .length = 0x00100000, - .type = MT_DEVICE }, { /* Mem Ctl */ .virtual = 0xf6000000, .pfn = __phys_to_pfn(0x48000000), @@ -134,59 +123,3 @@ void __init pxa_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); get_clk_frequency_khz(1); } - -#ifdef CONFIG_PM - -static unsigned long saved_gplr[4]; -static unsigned long saved_gpdr[4]; -static unsigned long saved_grer[4]; -static unsigned long saved_gfer[4]; - -static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state) -{ - int i, gpio; - - for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { - saved_gplr[i] = GPLR(gpio); - saved_gpdr[i] = GPDR(gpio); - saved_grer[i] = GRER(gpio); - saved_gfer[i] = GFER(gpio); - - /* Clear GPIO transition detect bits */ - GEDR(gpio) = GEDR(gpio); - } - return 0; -} - -static int pxa_gpio_resume(struct sys_device *dev) -{ - int i, gpio; - - for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { - /* restore level with set/clear */ - GPSR(gpio) = saved_gplr[i]; - GPCR(gpio) = ~saved_gplr[i]; - - GRER(gpio) = saved_grer[i]; - GFER(gpio) = saved_gfer[i]; - GPDR(gpio) = saved_gpdr[i]; - } - return 0; -} -#else -#define pxa_gpio_suspend NULL -#define pxa_gpio_resume NULL -#endif - -struct sysdev_class pxa_gpio_sysclass = { - .name = "gpio", - .suspend = pxa_gpio_suspend, - .resume = pxa_gpio_resume, -}; - -static int __init pxa_gpio_init(void) -{ - return sysdev_class_register(&pxa_gpio_sysclass); -} - -core_initcall(pxa_gpio_init); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index b3d10b0e52a0..5bb7ae757831 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -9,14 +9,13 @@ * published by the Free Software Foundation. */ +typedef int (*set_wake_t)(unsigned int, unsigned int); + struct sys_timer; extern struct sys_timer pxa_timer; -extern void __init pxa_init_irq_low(void); -extern void __init pxa_init_irq_high(void); -extern void __init pxa_init_irq_gpio(int gpio_nr); -extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)); -extern void __init pxa_init_gpio(int gpio_nr); +extern void __init pxa_init_irq(int irq_nr, set_wake_t fn); +extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn); extern void __init pxa25x_init_irq(void); extern void __init pxa27x_init_irq(void); extern void __init pxa3xx_init_irq(void); @@ -30,6 +29,8 @@ extern int pxa_last_gpio; mi->bank[__nr].size = (__size), \ mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27) +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + #ifdef CONFIG_PXA25x extern unsigned pxa25x_get_clk_frequency_khz(int); extern unsigned pxa25x_get_memclk_frequency_10khz(void); @@ -56,3 +57,4 @@ extern unsigned pxa3xx_get_memclk_frequency_10khz(void); extern struct sysdev_class pxa_irq_sysclass; extern struct sysdev_class pxa_gpio_sysclass; +extern struct sysdev_class pxa3xx_mfp_sysclass; diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c index 8638dd7dd076..7d3e16970be0 100644 --- a/arch/arm/mach-pxa/gpio.c +++ b/arch/arm/mach-pxa/gpio.c @@ -14,11 +14,14 @@ #include <linux/init.h> #include <linux/module.h> +#include <linux/irq.h> +#include <linux/sysdev.h> #include <asm/gpio.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include "generic.h" @@ -129,69 +132,283 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) __raw_writel(mask, pxa->regbase + GPCR_OFFSET); } +#define GPIO_CHIP(_n) \ + [_n] = { \ + .regbase = GPIO##_n##_BASE, \ + .chip = { \ + .label = "gpio-" #_n, \ + .direction_input = pxa_gpio_direction_input, \ + .direction_output = pxa_gpio_direction_output, \ + .get = pxa_gpio_get, \ + .set = pxa_gpio_set, \ + .base = (_n) * 32, \ + .ngpio = 32, \ + }, \ + } + static struct pxa_gpio_chip pxa_gpio_chip[] = { - [0] = { - .regbase = GPIO0_BASE, - .chip = { - .label = "gpio-0", - .direction_input = pxa_gpio_direction_input, - .direction_output = pxa_gpio_direction_output, - .get = pxa_gpio_get, - .set = pxa_gpio_set, - .base = 0, - .ngpio = 32, - }, - }, - [1] = { - .regbase = GPIO1_BASE, - .chip = { - .label = "gpio-1", - .direction_input = pxa_gpio_direction_input, - .direction_output = pxa_gpio_direction_output, - .get = pxa_gpio_get, - .set = pxa_gpio_set, - .base = 32, - .ngpio = 32, - }, - }, - [2] = { - .regbase = GPIO2_BASE, - .chip = { - .label = "gpio-2", - .direction_input = pxa_gpio_direction_input, - .direction_output = pxa_gpio_direction_output, - .get = pxa_gpio_get, - .set = pxa_gpio_set, - .base = 64, - .ngpio = 32, /* 21 for PXA25x */ - }, - }, + GPIO_CHIP(0), + GPIO_CHIP(1), + GPIO_CHIP(2), #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - [3] = { - .regbase = GPIO3_BASE, - .chip = { - .label = "gpio-3", - .direction_input = pxa_gpio_direction_input, - .direction_output = pxa_gpio_direction_output, - .get = pxa_gpio_get, - .set = pxa_gpio_set, - .base = 96, - .ngpio = 32, - }, - }, + GPIO_CHIP(3), #endif }; -void __init pxa_init_gpio(int gpio_nr) +/* + * PXA GPIO edge detection for IRQs: + * IRQs are generated on Falling-Edge, Rising-Edge, or both. + * Use this instead of directly setting GRER/GFER. + */ + +static unsigned long GPIO_IRQ_rising_edge[4]; +static unsigned long GPIO_IRQ_falling_edge[4]; +static unsigned long GPIO_IRQ_mask[4]; + +/* + * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate + * function of a GPIO, and GPDRx cannot be altered once configured. It + * is attributed as "occupied" here (I know this terminology isn't + * accurate, you are welcome to propose a better one :-) + */ +static int __gpio_is_occupied(unsigned gpio) +{ + if (cpu_is_pxa25x() || cpu_is_pxa27x()) + return GAFR(gpio) & (0x3 << (((gpio) & 0xf) * 2)); + else + return 0; +} + +static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) +{ + int gpio, idx; + + gpio = IRQ_TO_GPIO(irq); + idx = gpio >> 5; + + if (type == IRQ_TYPE_PROBE) { + /* Don't mess with enabled GPIOs using preconfigured edges or + * GPIOs set to alternate function or to output during probe + */ + if ((GPIO_IRQ_rising_edge[idx] | + GPIO_IRQ_falling_edge[idx] | + GPDR(gpio)) & GPIO_bit(gpio)) + return 0; + + if (__gpio_is_occupied(gpio)) + return 0; + + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + } + + GPDR(gpio) &= ~GPIO_bit(gpio); + + if (type & IRQ_TYPE_EDGE_RISING) + __set_bit(gpio, GPIO_IRQ_rising_edge); + else + __clear_bit(gpio, GPIO_IRQ_rising_edge); + + if (type & IRQ_TYPE_EDGE_FALLING) + __set_bit(gpio, GPIO_IRQ_falling_edge); + else + __clear_bit(gpio, GPIO_IRQ_falling_edge); + + GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; + GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; + + pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, + ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), + ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : "")); + return 0; +} + +/* + * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1. + */ + +static void pxa_ack_low_gpio(unsigned int irq) +{ + GEDR0 = (1 << (irq - IRQ_GPIO0)); +} + +static void pxa_mask_low_gpio(unsigned int irq) +{ + ICMR &= ~(1 << (irq - PXA_IRQ(0))); +} + +static void pxa_unmask_low_gpio(unsigned int irq) +{ + ICMR |= 1 << (irq - PXA_IRQ(0)); +} + +static struct irq_chip pxa_low_gpio_chip = { + .name = "GPIO-l", + .ack = pxa_ack_low_gpio, + .mask = pxa_mask_low_gpio, + .unmask = pxa_unmask_low_gpio, + .set_type = pxa_gpio_irq_type, +}; + +/* + * Demux handler for GPIO>=2 edge detect interrupts + */ + +#define GEDR_BITS (sizeof(gedr) * BITS_PER_BYTE) + +static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) +{ + int loop, bit, n; + unsigned long gedr[4]; + + do { + gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3; + gedr[1] = GEDR1 & GPIO_IRQ_mask[1]; + gedr[2] = GEDR2 & GPIO_IRQ_mask[2]; + gedr[3] = GEDR3 & GPIO_IRQ_mask[3]; + + GEDR0 = gedr[0]; GEDR1 = gedr[1]; + GEDR2 = gedr[2]; GEDR3 = gedr[3]; + + loop = 0; + bit = find_first_bit(gedr, GEDR_BITS); + while (bit < GEDR_BITS) { + loop = 1; + + n = PXA_GPIO_IRQ_BASE + bit; + desc_handle_irq(n, irq_desc + n); + + bit = find_next_bit(gedr, GEDR_BITS, bit + 1); + } + } while (loop); +} + +static void pxa_ack_muxed_gpio(unsigned int irq) +{ + int gpio = irq - IRQ_GPIO(2) + 2; + GEDR(gpio) = GPIO_bit(gpio); +} + +static void pxa_mask_muxed_gpio(unsigned int irq) +{ + int gpio = irq - IRQ_GPIO(2) + 2; + __clear_bit(gpio, GPIO_IRQ_mask); + GRER(gpio) &= ~GPIO_bit(gpio); + GFER(gpio) &= ~GPIO_bit(gpio); +} + +static void pxa_unmask_muxed_gpio(unsigned int irq) +{ + int gpio = irq - IRQ_GPIO(2) + 2; + int idx = gpio >> 5; + __set_bit(gpio, GPIO_IRQ_mask); + GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; + GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; +} + +static struct irq_chip pxa_muxed_gpio_chip = { + .name = "GPIO", + .ack = pxa_ack_muxed_gpio, + .mask = pxa_mask_muxed_gpio, + .unmask = pxa_unmask_muxed_gpio, + .set_type = pxa_gpio_irq_type, +}; + +void __init pxa_init_gpio(int gpio_nr, set_wake_t fn) { - int i; + int irq, i, gpio; + + pxa_last_gpio = gpio_nr - 1; + + /* clear all GPIO edge detects */ + for (i = 0; i < gpio_nr; i += 32) { + GFER(i) = 0; + GRER(i) = 0; + GEDR(i) = GEDR(i); + } + + /* GPIO 0 and 1 must have their mask bit always set */ + GPIO_IRQ_mask[0] = 3; + + for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { + set_irq_chip(irq, &pxa_low_gpio_chip); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) { + set_irq_chip(irq, &pxa_muxed_gpio_chip); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + /* Install handler for GPIO>=2 edge detect interrupts */ + set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); + + pxa_low_gpio_chip.set_wake = fn; + pxa_muxed_gpio_chip.set_wake = fn; /* add a GPIO chip for each register bank. * the last PXA25x register only contains 21 GPIOs */ - for (i = 0; i < gpio_nr; i += 32) { - if (i+32 > gpio_nr) - pxa_gpio_chip[i/32].chip.ngpio = gpio_nr - i; - gpiochip_add(&pxa_gpio_chip[i/32].chip); + for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) { + if (gpio + 32 > gpio_nr) + pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio; + gpiochip_add(&pxa_gpio_chip[i].chip); } } + +#ifdef CONFIG_PM + +static unsigned long saved_gplr[4]; +static unsigned long saved_gpdr[4]; +static unsigned long saved_grer[4]; +static unsigned long saved_gfer[4]; + +static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state) +{ + int i, gpio; + + for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { + saved_gplr[i] = GPLR(gpio); + saved_gpdr[i] = GPDR(gpio); + saved_grer[i] = GRER(gpio); + saved_gfer[i] = GFER(gpio); + + /* Clear GPIO transition detect bits */ + GEDR(gpio) = GEDR(gpio); + } + return 0; +} + +static int pxa_gpio_resume(struct sys_device *dev) +{ + int i, gpio; + + for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { + /* restore level with set/clear */ + GPSR(gpio) = saved_gplr[i]; + GPCR(gpio) = ~saved_gplr[i]; + + GRER(gpio) = saved_grer[i]; + GFER(gpio) = saved_gfer[i]; + GPDR(gpio) = saved_gpdr[i]; + } + return 0; +} +#else +#define pxa_gpio_suspend NULL +#define pxa_gpio_resume NULL +#endif + +struct sysdev_class pxa_gpio_sysclass = { + .name = "gpio", + .suspend = pxa_gpio_suspend, + .resume = pxa_gpio_resume, +}; + +static int __init pxa_gpio_init(void) +{ + return sysdev_class_register(&pxa_gpio_sysclass); +} + +core_initcall(pxa_gpio_init); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c new file mode 100644 index 000000000000..bdf239754037 --- /dev/null +++ b/arch/arm/mach-pxa/gumstix.c @@ -0,0 +1,148 @@ +/* + * linux/arch/arm/mach-pxa/gumstix.c + * + * Support for the Gumstix motherboards. + * + * Original Author: Craig Hughes + * Created: Feb 14, 2008 + * Copyright: Craig Hughes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Implemented based on lubbock.c by Nicolas Pitre and code from Craig + * Hughes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/sizes.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> +#include <asm/arch/gumstix.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/pxa2xx-gpio.h> + +#include "generic.h" + +static struct resource flash_resource = { + .start = 0x00000000, + .end = SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition gumstix_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + } , { + .name = "rootfs", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND + } +}; + +static struct flash_platform_data gumstix_flash_data = { + .map_name = "cfi_probe", + .parts = gumstix_partitions, + .nr_parts = ARRAY_SIZE(gumstix_partitions), + .width = 2, +}; + +static struct platform_device gumstix_flash_device = { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &gumstix_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +static struct platform_device *devices[] __initdata = { + &gumstix_flash_device, +}; + +#ifdef CONFIG_MMC_PXA +static struct pxamci_platform_data gumstix_mci_platform_data; + +static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int, + void *data) +{ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO53_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + + return 0; +} + +static struct pxamci_platform_data gumstix_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = gumstix_mci_init, +}; + +static void __init gumstix_mmc_init(void) +{ + pxa_set_mci_info(&gumstix_mci_platform_data); +} +#else +static void __init gumstix_mmc_init(void) +{ + printk(KERN_INFO "Gumstix mmc disabled\n"); +} +#endif + +#ifdef CONFIG_USB_GADGET_PXA2XX +static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = { + .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, + .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, +}; + +static void __init gumstix_udc_init(void) +{ + pxa_set_udc_info(&gumstix_udc_info); +} +#else +static void gumstix_udc_init(void) +{ + printk(KERN_INFO "Gumstix udc is disabled\n"); +} +#endif + +static void __init gumstix_init(void) +{ + gumstix_udc_init(); + gumstix_mmc_init(); + (void) platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(GUMSTIX, "Gumstix") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, /* match u-boot bi_boot_params */ + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .timer = &pxa_timer, + .init_machine = gumstix_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 0a9434432c55..2637633f9166 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -32,6 +32,7 @@ #include <asm/mach/map.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/idp.h> #include <asm/arch/pxafb.h> #include <asm/arch/bitfield.h> diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 36c6a68beca2..a9a0c3fab159 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-pxa/irq.c * - * Generic PXA IRQ handling, GPIO IRQ demultiplexing, etc. + * Generic PXA IRQ handling * * Author: Nicolas Pitre * Created: Jun 15, 2001 @@ -21,308 +21,58 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include "generic.h" +#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) +#define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR)) +#define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR)) /* * This is for peripheral IRQs internal to the PXA chip. */ -static void pxa_mask_low_irq(unsigned int irq) +static int pxa_internal_irq_nr; + +static void pxa_mask_irq(unsigned int irq) { - ICMR &= ~(1 << irq); + _ICMR(irq) &= ~(1 << IRQ_BIT(irq)); } -static void pxa_unmask_low_irq(unsigned int irq) +static void pxa_unmask_irq(unsigned int irq) { - ICMR |= (1 << irq); + _ICMR(irq) |= 1 << IRQ_BIT(irq); } -static struct irq_chip pxa_internal_chip_low = { +static struct irq_chip pxa_internal_irq_chip = { .name = "SC", - .ack = pxa_mask_low_irq, - .mask = pxa_mask_low_irq, - .unmask = pxa_unmask_low_irq, + .ack = pxa_mask_irq, + .mask = pxa_mask_irq, + .unmask = pxa_unmask_irq, }; -void __init pxa_init_irq_low(void) +void __init pxa_init_irq(int irq_nr, set_wake_t fn) { int irq; - /* disable all IRQs */ - ICMR = 0; + pxa_internal_irq_nr = irq_nr; - /* all IRQs are IRQ, not FIQ */ - ICLR = 0; + for (irq = 0; irq < irq_nr; irq += 32) { + _ICMR(irq) = 0; /* disable all IRQs */ + _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */ + } /* only unmasked interrupts kick us out of idle */ ICCR = 1; - for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) { - set_irq_chip(irq, &pxa_internal_chip_low); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } -} - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - -/* - * This is for the second set of internal IRQs as found on the PXA27x. - */ - -static void pxa_mask_high_irq(unsigned int irq) -{ - ICMR2 &= ~(1 << (irq - 32)); -} - -static void pxa_unmask_high_irq(unsigned int irq) -{ - ICMR2 |= (1 << (irq - 32)); -} - -static struct irq_chip pxa_internal_chip_high = { - .name = "SC-hi", - .ack = pxa_mask_high_irq, - .mask = pxa_mask_high_irq, - .unmask = pxa_unmask_high_irq, -}; - -void __init pxa_init_irq_high(void) -{ - int irq; - - ICMR2 = 0; - ICLR2 = 0; - - for (irq = PXA_IRQ(32); irq < PXA_IRQ(64); irq++) { - set_irq_chip(irq, &pxa_internal_chip_high); + for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) { + set_irq_chip(irq, &pxa_internal_irq_chip); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } -} -#endif - -/* - * PXA GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * Use this instead of directly setting GRER/GFER. - */ - -static long GPIO_IRQ_rising_edge[4]; -static long GPIO_IRQ_falling_edge[4]; -static long GPIO_IRQ_mask[4]; - -static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) -{ - int gpio, idx; - - gpio = IRQ_TO_GPIO(irq); - idx = gpio >> 5; - - if (type == IRQT_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or - GPIOs set to alternate function or to output during probe */ - if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx] | GPDR(gpio)) & - GPIO_bit(gpio)) - return 0; - if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) - return 0; - type = __IRQT_RISEDGE | __IRQT_FALEDGE; - } - - /* printk(KERN_DEBUG "IRQ%d (GPIO%d): ", irq, gpio); */ - - pxa_gpio_mode(gpio | GPIO_IN); - - if (type & __IRQT_RISEDGE) { - /* printk("rising "); */ - __set_bit (gpio, GPIO_IRQ_rising_edge); - } else { - __clear_bit (gpio, GPIO_IRQ_rising_edge); - } - - if (type & __IRQT_FALEDGE) { - /* printk("falling "); */ - __set_bit (gpio, GPIO_IRQ_falling_edge); - } else { - __clear_bit (gpio, GPIO_IRQ_falling_edge); - } - - /* printk("edges\n"); */ - - GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; - GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; - return 0; -} - -/* - * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1. - */ - -static void pxa_ack_low_gpio(unsigned int irq) -{ - GEDR0 = (1 << (irq - IRQ_GPIO0)); -} - -static struct irq_chip pxa_low_gpio_chip = { - .name = "GPIO-l", - .ack = pxa_ack_low_gpio, - .mask = pxa_mask_low_irq, - .unmask = pxa_unmask_low_irq, - .set_type = pxa_gpio_irq_type, -}; - -/* - * Demux handler for GPIO>=2 edge detect interrupts - */ - -static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int mask; - int loop; - - do { - loop = 0; - - mask = GEDR0 & GPIO_IRQ_mask[0] & ~3; - if (mask) { - GEDR0 = mask; - irq = IRQ_GPIO(2); - desc = irq_desc + irq; - mask >>= 2; - do { - if (mask & 1) - desc_handle_irq(irq, desc); - irq++; - desc++; - mask >>= 1; - } while (mask); - loop = 1; - } - - mask = GEDR1 & GPIO_IRQ_mask[1]; - if (mask) { - GEDR1 = mask; - irq = IRQ_GPIO(32); - desc = irq_desc + irq; - do { - if (mask & 1) - desc_handle_irq(irq, desc); - irq++; - desc++; - mask >>= 1; - } while (mask); - loop = 1; - } - - mask = GEDR2 & GPIO_IRQ_mask[2]; - if (mask) { - GEDR2 = mask; - irq = IRQ_GPIO(64); - desc = irq_desc + irq; - do { - if (mask & 1) - desc_handle_irq(irq, desc); - irq++; - desc++; - mask >>= 1; - } while (mask); - loop = 1; - } - - mask = GEDR3 & GPIO_IRQ_mask[3]; - if (mask) { - GEDR3 = mask; - irq = IRQ_GPIO(96); - desc = irq_desc + irq; - do { - if (mask & 1) - desc_handle_irq(irq, desc); - irq++; - desc++; - mask >>= 1; - } while (mask); - loop = 1; - } - } while (loop); -} - -static void pxa_ack_muxed_gpio(unsigned int irq) -{ - int gpio = irq - IRQ_GPIO(2) + 2; - GEDR(gpio) = GPIO_bit(gpio); -} - -static void pxa_mask_muxed_gpio(unsigned int irq) -{ - int gpio = irq - IRQ_GPIO(2) + 2; - __clear_bit(gpio, GPIO_IRQ_mask); - GRER(gpio) &= ~GPIO_bit(gpio); - GFER(gpio) &= ~GPIO_bit(gpio); -} - -static void pxa_unmask_muxed_gpio(unsigned int irq) -{ - int gpio = irq - IRQ_GPIO(2) + 2; - int idx = gpio >> 5; - __set_bit(gpio, GPIO_IRQ_mask); - GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; - GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; -} - -static struct irq_chip pxa_muxed_gpio_chip = { - .name = "GPIO", - .ack = pxa_ack_muxed_gpio, - .mask = pxa_mask_muxed_gpio, - .unmask = pxa_unmask_muxed_gpio, - .set_type = pxa_gpio_irq_type, -}; - -void __init pxa_init_irq_gpio(int gpio_nr) -{ - int irq, i; - - pxa_last_gpio = gpio_nr - 1; - - /* clear all GPIO edge detects */ - for (i = 0; i < gpio_nr; i += 32) { - GFER(i) = 0; - GRER(i) = 0; - GEDR(i) = GEDR(i); - } - - /* GPIO 0 and 1 must have their mask bit always set */ - GPIO_IRQ_mask[0] = 3; - - for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { - set_irq_chip(irq, &pxa_low_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) { - set_irq_chip(irq, &pxa_muxed_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* Install handler for GPIO>=2 edge detect interrupts */ - set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low); - set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); - - pxa_init_gpio(gpio_nr); -} - -void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)) -{ - pxa_internal_chip_low.set_wake = set_wake; -#ifdef CONFIG_PXA27x - pxa_internal_chip_high.set_wake = set_wake; -#endif - pxa_low_gpio_chip.set_wake = set_wake; - pxa_muxed_gpio_chip.set_wake = set_wake; + pxa_internal_irq_chip.set_wake = fn; } #ifdef CONFIG_PM @@ -330,19 +80,11 @@ static unsigned long saved_icmr[2]; static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) { - switch (dev->id) { - case 0: - saved_icmr[0] = ICMR; - ICMR = 0; - break; -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - case 1: - saved_icmr[1] = ICMR2; - ICMR2 = 0; - break; -#endif - default: - return -EINVAL; + int i, irq = PXA_IRQ(0); + + for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) { + saved_icmr[i] = _ICMR(irq); + _ICMR(irq) = 0; } return 0; @@ -350,22 +92,14 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) static int pxa_irq_resume(struct sys_device *dev) { - switch (dev->id) { - case 0: - ICMR = saved_icmr[0]; - ICLR = 0; - ICCR = 1; - break; -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - case 1: - ICMR2 = saved_icmr[1]; - ICLR2 = 0; - break; -#endif - default: - return -EINVAL; + int i, irq = PXA_IRQ(0); + + for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) { + _ICMR(irq) = saved_icmr[i]; + _ICLR(irq) = 0; } + ICCR = 1; return 0; } #else diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c index 2271d20ffeda..21880daabafe 100644 --- a/arch/arm/mach-pxa/leds-trizeps4.c +++ b/arch/arm/mach-pxa/leds-trizeps4.c @@ -18,6 +18,7 @@ #include <asm/leds.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/trizeps4.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 0a4b54c21314..530654474bb2 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -37,12 +37,11 @@ #include <asm/arch/gpio.h> #include <asm/arch/pxafb.h> #include <asm/arch/ssp.h> +#include <asm/arch/pxa27x_keypad.h> #include <asm/arch/littleton.h> #include "generic.h" -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - /* Littleton MFP configurations */ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { /* LCD */ @@ -76,6 +75,21 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { /* Debug Ethernet */ GPIO90_GPIO, + + /* Keypad */ + GPIO107_KP_DKIN_0, + GPIO108_KP_DKIN_1, + GPIO115_KP_MKIN_0, + GPIO116_KP_MKIN_1, + GPIO117_KP_MKIN_2, + GPIO118_KP_MKIN_3, + GPIO119_KP_MKIN_4, + GPIO120_KP_MKIN_5, + GPIO121_KP_MKOUT_0, + GPIO122_KP_MKOUT_1, + GPIO123_KP_MKOUT_2, + GPIO124_KP_MKOUT_3, + GPIO125_KP_MKOUT_4, }; static struct resource smc91x_resources[] = { @@ -287,8 +301,7 @@ static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = { static struct pxafb_mach_info littleton_lcd_info = { .modes = tpo_tdo24mtea1_modes, .num_modes = 2, - .lccr0 = LCCR0_Act, - .lccr3 = LCCR3_HSP | LCCR3_VSP, + .lcd_conn = LCD_COLOR_TFT_16BPP, .pxafb_lcd_power = littleton_lcd_power, }; @@ -300,6 +313,54 @@ static void littleton_init_lcd(void) static inline void littleton_init_lcd(void) {}; #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */ +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES) +static unsigned int littleton_matrix_key_map[] = { + /* KEY(row, col, key_code) */ + KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3), + KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7), + KEY(1, 2, KEY_8), KEY(2, 2, KEY_9), + + KEY(0, 3, KEY_KPASTERISK), /* * */ + KEY(2, 3, KEY_KPDOT), /* # */ + + KEY(5, 4, KEY_ENTER), + + KEY(5, 0, KEY_UP), + KEY(5, 1, KEY_DOWN), + KEY(5, 2, KEY_LEFT), + KEY(5, 3, KEY_RIGHT), + KEY(3, 2, KEY_HOME), + KEY(4, 1, KEY_END), + KEY(3, 3, KEY_BACK), + + KEY(4, 0, KEY_SEND), + KEY(4, 2, KEY_VOLUMEUP), + KEY(4, 3, KEY_VOLUMEDOWN), + + KEY(3, 0, KEY_F22), /* soft1 */ + KEY(3, 1, KEY_F23), /* soft2 */ +}; + +static struct pxa27x_keypad_platform_data littleton_keypad_info = { + .matrix_key_rows = 6, + .matrix_key_cols = 5, + .matrix_key_map = littleton_matrix_key_map, + .matrix_key_map_size = ARRAY_SIZE(littleton_matrix_key_map), + + .enable_rotary0 = 1, + .rotary0_up_key = KEY_UP, + .rotary0_down_key = KEY_DOWN, + + .debounce_interval = 30, +}; +static void __init littleton_init_keypad(void) +{ + pxa_set_keypad_info(&littleton_keypad_info); +} +#else +static inline void littleton_init_keypad(void) {} +#endif + static void __init littleton_init(void) { /* initialize MFP configurations */ @@ -312,6 +373,7 @@ static void __init littleton_init(void) platform_device_register(&smc91x_device); littleton_init_lcd(); + littleton_init_keypad(); } MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)") diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index afa62ffe3ad5..a20e4b1649d6 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -39,6 +39,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/lpd270.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e7ae4bb3e361..7b9bdd0c6665 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -42,6 +42,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/mfp-pxa25x.h> #include <asm/arch/lubbock.h> #include <asm/arch/udc.h> #include <asm/arch/irda.h> @@ -51,6 +52,40 @@ #include "generic.h" #include "devices.h" +static unsigned long lubbock_pin_config[] __initdata = { + GPIO15_nCS_1, /* CS1 - Flash */ + GPIO79_nCS_3, /* CS3 - SMC ethernet */ + + /* SSP data pins */ + GPIO23_SSP1_SCLK, + GPIO25_SSP1_TXD, + GPIO26_SSP1_RXD, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + + /* wakeup */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, +}; #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) @@ -186,26 +221,6 @@ static struct platform_device sa1111_device = { .resource = sa1111_resources, }; -static struct resource smc91x_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = 0x0c000c00, - .end = 0x0c0fffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = LUBBOCK_ETH_IRQ, - .end = LUBBOCK_ETH_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, - [2] = { - .name = "smc91x-attrib", - .start = 0x0e000000, - .end = 0x0e0fffff, - .flags = IORESOURCE_MEM, - }, -}; - /* ADS7846 is connected through SSP ... and if your board has J5 populated, * you can select it to replace the ucb1400 by switching the touchscreen cable * (to J5) and poking board registers (as done below). Else it's only useful @@ -261,6 +276,26 @@ static struct spi_board_info spi_board_info[] __initdata = { { }, }; +static struct resource smc91x_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = 0x0c000c00, + .end = 0x0c0fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = LUBBOCK_ETH_IRQ, + .end = LUBBOCK_ETH_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, + [2] = { + .name = "smc91x-attrib", + .start = 0x0e000000, + .end = 0x0e0fffff, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, @@ -360,8 +395,8 @@ static struct pxafb_mach_info sharp_lm8v31 = { .num_modes = 1, .cmap_inverse = 0, .cmap_static = 0, - .lccr0 = LCCR0_SDS, - .lccr3 = LCCR3_PCP | LCCR3_Acb(255), + .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL | + LCD_AC_BIAS_FREQ(255), }; #define MMC_POLL_RATE msecs_to_jiffies(1000) @@ -404,10 +439,6 @@ static int lubbock_mci_init(struct device *dev, irq_handler_t detect_int, void *data) { - /* setup GPIO for PXA25x MMC controller */ - pxa_gpio_mode(GPIO6_MMCCLK_MD); - pxa_gpio_mode(GPIO8_MMCCS0_MD); - /* detect card insert/eject */ mmc_detect_int = detect_int; init_timer(&mmc_timer); @@ -457,6 +488,8 @@ static void __init lubbock_init(void) { int flashboot = (LUB_CONF_SWITCHES & 1); + pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config)); + pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); @@ -489,46 +522,6 @@ static void __init lubbock_map_io(void) pxa_map_io(); iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc)); - /* SSP data pins */ - pxa_gpio_mode(GPIO23_SCLK_MD); - pxa_gpio_mode(GPIO25_STXD_MD); - pxa_gpio_mode(GPIO26_SRXD_MD); - - /* This enables the BTUART */ - pxa_gpio_mode(GPIO42_BTRXD_MD); - pxa_gpio_mode(GPIO43_BTTXD_MD); - pxa_gpio_mode(GPIO44_BTCTS_MD); - pxa_gpio_mode(GPIO45_BTRTS_MD); - - GPSR(GPIO48_nPOE) = - GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | - GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | - GPIO_bit(GPIO52_nPCE_1) | - GPIO_bit(GPIO53_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO52_nPCE_1_MD); - pxa_gpio_mode(GPIO53_nPCE_2_MD); - pxa_gpio_mode(GPIO54_pSKTSEL_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - - /* This is for the SMC chip select */ - pxa_gpio_mode(GPIO79_nCS_3_MD); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x00008000; - PGSR1 = 0x003F0202; - PGSR2 = 0x0001C000; PCFR |= PCFR_OPDE; } diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index d98ef7ada2f8..badba064dc04 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -16,24 +16,114 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/mfd/htc-egpio.h> +#include <linux/mfd/htc-pasic3.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <linux/pda_power.h> #include <asm/gpio.h> #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/arch/magician.h> +#include <asm/arch/mfp-pxa27x.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/pxafb.h> +#include <asm/arch/i2c.h> +#include <asm/arch/mmc.h> #include <asm/arch/irda.h> #include <asm/arch/ohci.h> #include "generic.h" +static unsigned long magician_pin_config[] = { + + /* SDRAM and Static Memory I/O Signals */ + GPIO20_nSDCS_2, + GPIO21_nSDCS_3, + GPIO15_nCS_1, + GPIO78_nCS_2, /* PASIC3 */ + GPIO79_nCS_3, /* EGPIO CPLD */ + GPIO80_nCS_4, + GPIO33_nCS_5, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* PWM 0 */ + GPIO16_PWM0_OUT, + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO31_I2S_SYNC, + GPIO113_I2S_SYSCLK, + + /* SSP 2 */ + GPIO19_SSP2_SCLK, + GPIO14_SSP2_SFRM, + GPIO89_SSP2_TXD, + GPIO88_SSP2_RXD, + + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* QCI */ + GPIO12_CIF_DD_7, + GPIO17_CIF_DD_6, + GPIO50_CIF_DD_3, + GPIO51_CIF_DD_2, + GPIO52_CIF_DD_4, + GPIO53_CIF_MCLK, + GPIO54_CIF_PCLK, + GPIO55_CIF_DD_1, + GPIO81_CIF_DD_0, + GPIO82_CIF_DD_5, + GPIO84_CIF_FV, + GPIO85_CIF_LV, + + /* Magician specific input GPIOs */ + GPIO9_GPIO, /* unknown */ + GPIO10_GPIO, /* GSM_IRQ */ + GPIO13_GPIO, /* CPLD_IRQ */ + GPIO107_GPIO, /* DS1WM_IRQ */ + GPIO108_GPIO, /* GSM_READY */ + GPIO115_GPIO, /* nPEN_IRQ */ +}; + /* * IRDA */ @@ -83,8 +173,64 @@ static struct platform_device gpio_keys = { .id = -1, }; + /* - * LCD - Toppoly TD028STEB1 + * EGPIO (Xilinx CPLD) + * + * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input + */ + +static struct resource egpio_resources[] = { + [0] = { + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + 0x20, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), + .end = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct htc_egpio_chip egpio_chips[] = { + [0] = { + .reg_start = 0, + .gpio_base = MAGICIAN_EGPIO(0, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_OUTPUT, + .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ + }, + [1] = { + .reg_start = 4, + .gpio_base = MAGICIAN_EGPIO(4, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_INPUT, + }, +}; + +static struct htc_egpio_platform_data egpio_info = { + .reg_width = 8, + .bus_width = 32, + .irq_base = IRQ_BOARD_START, + .num_irqs = 4, + .ack_register = 3, + .chip = egpio_chips, + .num_chips = ARRAY_SIZE(egpio_chips), +}; + +static struct platform_device egpio = { + .name = "htc-egpio", + .id = -1, + .resource = egpio_resources, + .num_resources = ARRAY_SIZE(egpio_resources), + .dev = { + .platform_data = &egpio_info, + }, +}; + +/* + * LCD - Toppoly TD028STEB1 or Samsung LTP280QV */ static struct pxafb_mode_info toppoly_modes[] = { @@ -103,12 +249,99 @@ static struct pxafb_mode_info toppoly_modes[] = { }, }; +static struct pxafb_mode_info samsung_modes[] = { + { + .pixclock = 96153, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 4, + .left_margin = 9, + .upper_margin = 4, + .right_margin = 9, + .lower_margin = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + }, +}; + +static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) +{ + pr_debug("Toppoly LCD power\n"); + + if (on) { + pr_debug("on\n"); + gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + udelay(2000); + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); + udelay(2000); + /* FIXME: enable LCDC here */ + udelay(2000); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + udelay(2000); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + } else { + pr_debug("off\n"); + msleep(15); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + udelay(500); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + udelay(1000); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); + } +} + +static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) +{ + pr_debug("Samsung LCD power\n"); + + if (on) { + pr_debug("on\n"); + if (system_rev < 3) + gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1); + else + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); + mdelay(10); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + mdelay(10); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + mdelay(30); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + mdelay(10); + } else { + pr_debug("off\n"); + mdelay(10); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + mdelay(30); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + mdelay(10); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + mdelay(10); + if (system_rev < 3) + gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); + else + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); + } +} + static struct pxafb_mach_info toppoly_info = { - .modes = toppoly_modes, - .num_modes = 1, - .fixed_modes = 1, - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_PixRsEdg, + .modes = toppoly_modes, + .num_modes = 1, + .fixed_modes = 1, + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_PixRsEdg, + .pxafb_lcd_power = toppoly_lcd_power, +}; + +static struct pxafb_mach_info samsung_info = { + .modes = samsung_modes, + .num_modes = 1, + .fixed_modes = 1, + .lccr0 = LCCR0_LDDALT | LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_PixFlEdg, + .pxafb_lcd_power = samsung_lcd_power, }; /* @@ -120,9 +353,18 @@ static void magician_set_bl_intensity(int intensity) if (intensity) { PWM_CTRL0 = 1; PWM_PERVAL0 = 0xc8; - PWM_PWDUTY0 = intensity; + if (intensity > 0xc7) { + PWM_PWDUTY0 = intensity - 0x48; + gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1); + } else { + PWM_PWDUTY0 = intensity; + gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0); + } + gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 1); pxa_set_cken(CKEN_PWM0, 1); } else { + /* PWM_PWDUTY0 = intensity; */ + gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 0); pxa_set_cken(CKEN_PWM0, 0); } } @@ -130,18 +372,236 @@ static void magician_set_bl_intensity(int intensity) static struct generic_bl_info backlight_info = { .default_intensity = 0x64, .limit_mask = 0x0b, - .max_intensity = 0xc7, + .max_intensity = 0xc7+0x48, .set_bl_intensity = magician_set_bl_intensity, }; static struct platform_device backlight = { - .name = "corgi-bl", + .name = "generic-bl", .dev = { .platform_data = &backlight_info, }, .id = -1, }; +/* + * LEDs + */ + +struct gpio_led gpio_leds[] = { + { + .name = "magician::vibra", + .default_trigger = "none", + .gpio = GPIO22_MAGICIAN_VIBRA_EN, + }, + { + .name = "magician::phone_bl", + .default_trigger = "none", + .gpio = GPIO103_MAGICIAN_LED_KP, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct pasic3_led pasic3_leds[] = { + { + .led = { + .name = "magician:red", + .default_trigger = "ds2760-battery.0-charging", + }, + .hw_num = 0, + .bit2 = PASIC3_BIT2_LED0, + .mask = PASIC3_MASK_LED0, + }, + { + .led = { + .name = "magician:green", + .default_trigger = "ds2760-battery.0-charging-or-full", + }, + .hw_num = 1, + .bit2 = PASIC3_BIT2_LED1, + .mask = PASIC3_MASK_LED1, + }, + { + .led = { + .name = "magician:blue", + .default_trigger = "bluetooth", + }, + .hw_num = 2, + .bit2 = PASIC3_BIT2_LED2, + .mask = PASIC3_MASK_LED2, + }, +}; + +static struct platform_device pasic3; + +static struct pasic3_leds_machinfo pasic3_leds_info = { + .num_leds = ARRAY_SIZE(pasic3_leds), + .power_gpio = EGPIO_MAGICIAN_LED_POWER, + .leds = pasic3_leds, +}; + +/* + * PASIC3 with DS1WM + */ + +static struct resource pasic3_resources[] = { + [0] = { + .start = PXA_CS2_PHYS, + .end = PXA_CS2_PHYS + 0x1b, + .flags = IORESOURCE_MEM, + }, + /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */ + [1] = { + .start = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), + .end = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct pasic3_platform_data pasic3_platform_data = { + .bus_shift = 2, + .led_pdata = &pasic3_leds_info, + .clock_rate = 4000000, +}; + +static struct platform_device pasic3 = { + .name = "pasic3", + .id = -1, + .num_resources = ARRAY_SIZE(pasic3_resources), + .resource = pasic3_resources, + .dev = { + .platform_data = &pasic3_platform_data, + }, +}; + +/* + * External power + */ + +static int magician_is_ac_online(void) +{ + return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); +} + +static int magician_is_usb_online(void) +{ + return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB); +} + +static void magician_set_charge(int flags) +{ + gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags); + gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags); +} + +static char *magician_supplicants[] = { + "ds2760-battery.0", "backup-battery" +}; + +static struct pda_power_pdata power_supply_info = { + .is_ac_online = magician_is_ac_online, + .is_usb_online = magician_is_usb_online, + .set_charge = magician_set_charge, + .supplied_to = magician_supplicants, + .num_supplicants = ARRAY_SIZE(magician_supplicants), +}; + +static struct resource power_supply_resources[] = { + [0] = { + .name = "ac", + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_AC, + .end = IRQ_MAGICIAN_AC, + }, + [1] = { + .name = "usb", + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_AC, + .end = IRQ_MAGICIAN_AC, + }, +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + + +/* + * MMC/SD + */ + +static int magician_mci_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int err; + + err = request_irq(IRQ_MAGICIAN_SD, detect_irq, + IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + "MMC card detect", data); + if (err) + goto err_request_irq; + err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER"); + if (err) + goto err_request_power; + err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY"); + if (err) + goto err_request_readonly; + + return 0; + +err_request_readonly: + gpio_free(EGPIO_MAGICIAN_SD_POWER); +err_request_power: + free_irq(IRQ_MAGICIAN_SD, data); +err_request_irq: + return err; +} + +static void magician_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *pdata = dev->platform_data; + + gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask); +} + +static int magician_mci_get_ro(struct device *dev) +{ + return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY)); +} + +static void magician_mci_exit(struct device *dev, void *data) +{ + gpio_free(EGPIO_MAGICIAN_nSD_READONLY); + gpio_free(EGPIO_MAGICIAN_SD_POWER); + free_irq(IRQ_MAGICIAN_SD, data); +} + +static struct pxamci_platform_data magician_mci_info = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = magician_mci_init, + .get_ro = magician_mci_get_ro, + .setpower = magician_mci_setpower, + .exit = magician_mci_exit, +}; + /* * USB OHCI @@ -166,6 +626,11 @@ static struct pxaohci_platform_data magician_ohci_info = { * StrataFlash */ +static void magician_set_vpp(struct map_info *map, int vpp) +{ + gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp); +} + #define PXA_CS_SIZE 0x04000000 static struct resource strataflash_resource = { @@ -176,13 +641,14 @@ static struct resource strataflash_resource = { static struct physmap_flash_data strataflash_data = { .width = 4, + .set_vpp = magician_set_vpp, }; static struct platform_device strataflash = { .name = "physmap-flash", .id = -1, - .num_resources = 1, .resource = &strataflash_resource, + .num_resources = 1, .dev = { .platform_data = &strataflash_data, }, @@ -194,16 +660,57 @@ static struct platform_device strataflash = { static struct platform_device *devices[] __initdata = { &gpio_keys, + &egpio, &backlight, + &pasic3, + &power_supply, &strataflash, + &leds_gpio, }; static void __init magician_init(void) { + void __iomem *cpld; + int lcd_select; + int err; + + gpio_request(GPIO13_MAGICIAN_CPLD_IRQ, "CPLD_IRQ"); + gpio_request(GPIO107_MAGICIAN_DS1WM_IRQ, "DS1WM_IRQ"); + + pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN"); + if (!err) { + gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1); + pxa_set_ficp_info(&magician_ficp_info); + } + pxa_set_i2c_info(NULL); + pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); - pxa_set_ficp_info(&magician_ficp_info); - set_pxa_fb_info(&toppoly_info); + + /* Check LCD type we have */ + cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000); + if (cpld) { + u8 board_id = __raw_readb(cpld+0x14); + iounmap(cpld); + system_rev = board_id & 0x7; + lcd_select = board_id & 0x8; + pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); + if (lcd_select && (system_rev < 3)) { + gpio_request(GPIO75_MAGICIAN_SAMSUNG_POWER, "SAMSUNG_POWER"); + gpio_direction_output(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); + } + gpio_request(GPIO104_MAGICIAN_LCD_POWER_1, "LCD_POWER_1"); + gpio_request(GPIO105_MAGICIAN_LCD_POWER_2, "LCD_POWER_2"); + gpio_request(GPIO106_MAGICIAN_LCD_POWER_3, "LCD_POWER_3"); + gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0); + gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0); + gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0); + set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info); + } else + pr_err("LCD detection: CPLD mapping failed\n"); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 72a436fb9a29..7399fb34da4e 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -24,6 +24,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/backlight.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <asm/types.h> #include <asm/setup.h> @@ -40,16 +42,94 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/mfp-pxa27x.h> #include <asm/arch/mainstone.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> +#include <asm/arch/i2c.h> #include <asm/arch/mmc.h> #include <asm/arch/irda.h> #include <asm/arch/ohci.h> +#include <asm/arch/pxa27x_keypad.h> #include "generic.h" #include "devices.h" +static unsigned long mainstone_pin_config[] = { + /* Chip Select */ + GPIO15_nCS_1, + + /* LCD - 16bpp Active TFT */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + GPIO16_PWM0_OUT, /* Backlight */ + + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + + /* USB Host Port 1 */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* AC97 */ + GPIO45_AC97_SYSCLK, + + /* Keypad */ + GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO94_KP_DKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO95_KP_DKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, + GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, + GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + GPIO106_KP_MKOUT_3, + GPIO107_KP_MKOUT_4, + GPIO108_KP_MKOUT_5, + GPIO96_KP_MKOUT_6, + + /* GPIO */ + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, +}; static unsigned long mainstone_irq_enabled; @@ -278,13 +358,13 @@ static int mainstone_backlight_update_status(struct backlight_device *bl) bl->props.fb_blank != FB_BLANK_UNBLANK) brightness = 0; - if (brightness != 0) { - pxa_gpio_mode(GPIO16_PWM0_MD); + if (brightness != 0) pxa_set_cken(CKEN_PWM0, 1); - } + PWM_CTRL0 = 0; PWM_PWDUTY0 = brightness; PWM_PERVAL0 = bl->props.max_brightness; + if (brightness == 0) pxa_set_cken(CKEN_PWM0, 0); return 0; /* pointless return value */ @@ -354,24 +434,13 @@ static struct pxafb_mode_info toshiba_ltm035a776c_mode = { static struct pxafb_mach_info mainstone_pxafb_info = { .num_modes = 1, - .lccr0 = LCCR0_Act, - .lccr3 = LCCR3_PCP, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, }; static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data) { int err; - /* - * setup GPIO for PXA27x MMC controller - */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - /* make sure SD/Memory Stick multiplexer's signals * are routed to MMC controller */ @@ -434,19 +503,39 @@ static struct pxaficp_platform_data mainstone_ficp_platform_data = { .transceiver_mode = mainstone_irda_transceiver_mode, }; +static struct gpio_keys_button gpio_keys_button[] = { + [0] = { + .desc = "wakeup", + .code = KEY_SUSPEND, + .type = EV_KEY, + .gpio = 1, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data mainstone_gpio_keys = { + .buttons = gpio_keys_button, + .nbuttons = 1, +}; + +static struct platform_device mst_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mainstone_gpio_keys, + }, +}; + static struct platform_device *platform_devices[] __initdata = { &smc91x_device, &mst_audio_device, &mst_flash_device[0], &mst_flash_device[1], + &mst_gpio_keys_device, }; static int mainstone_ohci_init(struct device *dev) { - /* setup Port1 GPIO pin. */ - pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ - pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ - /* Set the Power Control Polarity Low and Power Sense Polarity Low to active low. */ UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & @@ -460,10 +549,63 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = { .init = mainstone_ohci_init, }; +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES) +static unsigned int mainstone_matrix_keys[] = { + KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C), + KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F), + KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I), + KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L), + KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O), + KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R), + KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U), + KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X), + KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z), + + KEY(0, 4, KEY_DOT), /* . */ + KEY(1, 4, KEY_CLOSE), /* @ */ + KEY(4, 4, KEY_SLASH), + KEY(5, 4, KEY_BACKSLASH), + KEY(0, 5, KEY_HOME), + KEY(1, 5, KEY_LEFTSHIFT), + KEY(2, 5, KEY_SPACE), + KEY(3, 5, KEY_SPACE), + KEY(4, 5, KEY_ENTER), + KEY(5, 5, KEY_BACKSPACE), + + KEY(0, 6, KEY_UP), + KEY(1, 6, KEY_DOWN), + KEY(2, 6, KEY_LEFT), + KEY(3, 6, KEY_RIGHT), + KEY(4, 6, KEY_SELECT), +}; + +struct pxa27x_keypad_platform_data mainstone_keypad_info = { + .matrix_key_rows = 6, + .matrix_key_cols = 7, + .matrix_key_map = mainstone_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(mainstone_matrix_keys), + + .enable_rotary0 = 1, + .rotary0_up_key = KEY_UP, + .rotary0_down_key = KEY_DOWN, + + .debounce_interval = 30, +}; + +static void __init mainstone_init_keypad(void) +{ + pxa_set_keypad_info(&mainstone_keypad_info); +} +#else +static inline void mainstone_init_keypad(void) {} +#endif + static void __init mainstone_init(void) { int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ + pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config)); + mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; mst_flash_data[1].width = 4; @@ -480,31 +622,6 @@ static void __init mainstone_init(void) */ ARB_CNTRL = ARB_CORE_PARK | 0x234; - /* - * On Mainstone, we route AC97_SYSCLK via GPIO45 to - * the audio daughter card - */ - pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); - - GPSR(GPIO48_nPOE) = - GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | - GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | - GPIO_bit(GPIO85_nPCE_1) | - GPIO_bit(GPIO54_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO85_nPCE_1_MD); - pxa_gpio_mode(GPIO54_nPCE_2_MD); - pxa_gpio_mode(GPIO79_pSKTSEL_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); /* reading Mainstone's "Virtual Configuration Register" @@ -520,6 +637,9 @@ static void __init mainstone_init(void) pxa_set_mci_info(&mainstone_mci_platform_data); pxa_set_ficp_info(&mainstone_ficp_platform_data); pxa_set_ohci_info(&mainstone_ohci_platform_data); + pxa_set_i2c_info(NULL); + + mainstone_init_keypad(); } @@ -537,23 +657,9 @@ static void __init mainstone_map_io(void) pxa_map_io(); iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc)); - /* initialize sleep mode regs (wake-up sources, etc) */ - PGSR0 = 0x00008800; - PGSR1 = 0x00000002; - PGSR2 = 0x0001FC00; - PGSR3 = 0x00001F81; - PWER = 0xC0000002; - PRER = 0x00000002; - PFER = 0x00000002; /* for use I SRAM as framebuffer. */ PSLR |= 0xF04; PCFR = 0x66; - /* For Keypad wakeup. */ - KPC &=~KPC_ASACT; - KPC |=KPC_AS; - PKWR = 0x000FD000; - /* Need read PKWR back after set it. */ - PKWR; } MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c new file mode 100644 index 000000000000..22097a1707cc --- /dev/null +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -0,0 +1,245 @@ +/* + * linux/arch/arm/mach-pxa/mfp-pxa2xx.c + * + * PXA2xx pin mux configuration support + * + * The GPIOs on PXA2xx can be configured as one of many alternate + * functions, this is by concept samilar to the MFP configuration + * on PXA3xx, what's more important, the low power pin state and + * wakeup detection are also supported by the same framework. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/arch/hardware.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/mfp-pxa2xx.h> + +#include "generic.h" + +#define PGSR(x) __REG2(0x40F00020, ((x) & 0x60) >> 3) + +#define PWER_WE35 (1 << 24) + +struct gpio_desc { + unsigned valid : 1; + unsigned can_wakeup : 1; + unsigned keypad_gpio : 1; + unsigned int mask; /* bit mask in PWER or PKWR */ + unsigned long config; +}; + +static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1]; + +static int __mfp_config_gpio(unsigned gpio, unsigned long c) +{ + unsigned long gafr, mask = GPIO_bit(gpio); + int fn; + + fn = MFP_AF(c); + if (fn > 3) + return -EINVAL; + + /* alternate function and direction */ + gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2)); + GAFR(gpio) = gafr | (fn << ((gpio & 0xf) * 2)); + + if (c & MFP_DIR_OUT) + GPDR(gpio) |= mask; + else + GPDR(gpio) &= ~mask; + + /* low power state */ + switch (c & MFP_LPM_STATE_MASK) { + case MFP_LPM_DRIVE_HIGH: + PGSR(gpio) |= mask; + break; + case MFP_LPM_DRIVE_LOW: + PGSR(gpio) &= ~mask; + break; + case MFP_LPM_INPUT: + break; + default: + pr_warning("%s: invalid low power state for GPIO%d\n", + __func__, gpio); + return -EINVAL; + } + + /* give early warning if MFP_LPM_CAN_WAKEUP is set on the + * configurations of those pins not able to wakeup + */ + if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) { + pr_warning("%s: GPIO%d unable to wakeup\n", + __func__, gpio); + return -EINVAL; + } + + if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) { + pr_warning("%s: output GPIO%d unable to wakeup\n", + __func__, gpio); + return -EINVAL; + } + + return 0; +} + +void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num) +{ + unsigned long flags; + unsigned long *c; + int i, gpio; + + for (i = 0, c = mfp_cfgs; i < num; i++, c++) { + + gpio = mfp_to_gpio(MFP_PIN(*c)); + + if (!gpio_desc[gpio].valid) { + pr_warning("%s: GPIO%d is invalid pin\n", + __func__, gpio); + continue; + } + + local_irq_save(flags); + + gpio_desc[gpio].config = *c; + __mfp_config_gpio(gpio, *c); + + local_irq_restore(flags); + } +} + +int gpio_set_wake(unsigned int gpio, unsigned int on) +{ + struct gpio_desc *d; + unsigned long c; + + if (gpio > mfp_to_gpio(MFP_PIN_GPIO127)) + return -EINVAL; + + d = &gpio_desc[gpio]; + c = d->config; + + if (!d->valid) + return -EINVAL; + + if (d->keypad_gpio) + return -EINVAL; + + if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) { + if (on) { + PWER |= d->mask; + + if (c & MFP_LPM_EDGE_RISE) + PRER |= d->mask; + else + PRER &= ~d->mask; + + if (c & MFP_LPM_EDGE_FALL) + PFER |= d->mask; + else + PFER &= ~d->mask; + } else { + PWER &= ~d->mask; + PRER &= ~d->mask; + PFER &= ~d->mask; + } + } + return 0; +} + +#ifdef CONFIG_PXA25x +static int __init pxa25x_mfp_init(void) +{ + int i; + + if (cpu_is_pxa25x()) { + for (i = 0; i <= 84; i++) + gpio_desc[i].valid = 1; + + for (i = 0; i <= 15; i++) { + gpio_desc[i].can_wakeup = 1; + gpio_desc[i].mask = GPIO_bit(i); + } + } + + return 0; +} +postcore_initcall(pxa25x_mfp_init); +#endif /* CONFIG_PXA25x */ + +#ifdef CONFIG_PXA27x +static int pxa27x_pkwr_gpio[] = { + 13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94, + 95, 96, 97, 98, 99, 100, 101, 102 +}; + +int keypad_set_wake(unsigned int on) +{ + unsigned int i, gpio, mask = 0; + + if (!on) { + PKWR = 0; + return 0; + } + + for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { + + gpio = pxa27x_pkwr_gpio[i]; + + if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP) + mask |= gpio_desc[gpio].mask; + } + + PKWR = mask; + return 0; +} + +static int __init pxa27x_mfp_init(void) +{ + int i, gpio; + + if (cpu_is_pxa27x()) { + for (i = 0; i <= 120; i++) { + /* skip GPIO2, 5, 6, 7, 8, they are not + * valid pins allow configuration + */ + if (i == 2 || i == 5 || i == 6 || + i == 7 || i == 8) + continue; + + gpio_desc[i].valid = 1; + } + + /* Keypad GPIOs */ + for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { + gpio = pxa27x_pkwr_gpio[i]; + gpio_desc[gpio].can_wakeup = 1; + gpio_desc[gpio].keypad_gpio = 1; + gpio_desc[gpio].mask = 1 << i; + } + + /* Overwrite GPIO13 as a PWER wakeup source */ + for (i = 0; i <= 15; i++) { + /* skip GPIO2, 5, 6, 7, 8 */ + if (GPIO_bit(i) & 0x1e4) + continue; + + gpio_desc[i].can_wakeup = 1; + gpio_desc[i].mask = GPIO_bit(i); + } + + gpio_desc[35].can_wakeup = 1; + gpio_desc[35].mask = PWER_WE35; + } + + return 0; +} +postcore_initcall(pxa27x_mfp_init); +#endif /* CONFIG_PXA27x */ diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index f5809adce298..3a5b0fcbaf1f 100644 --- a/arch/arm/mach-pxa/mfp.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -42,7 +42,7 @@ struct pxa3xx_mfp_pin { static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX]; /* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */ -const static unsigned long mfpr_lpm[] = { +static const unsigned long mfpr_lpm[] = { MFPR_LPM_INPUT, MFPR_LPM_DRIVE_LOW, MFPR_LPM_DRIVE_HIGH, @@ -52,7 +52,7 @@ const static unsigned long mfpr_lpm[] = { }; /* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ -const static unsigned long mfpr_pull[] = { +static const unsigned long mfpr_pull[] = { MFPR_PULL_NONE, MFPR_PULL_LOW, MFPR_PULL_HIGH, @@ -60,7 +60,7 @@ const static unsigned long mfpr_pull[] = { }; /* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ -const static unsigned long mfpr_edge[] = { +static const unsigned long mfpr_edge[] = { MFPR_EDGE_NONE, MFPR_EDGE_RISE, MFPR_EDGE_FALL, @@ -234,22 +234,22 @@ static int pxa3xx_mfp_resume(struct sys_device *d) return 0; } +#else +#define pxa3xx_mfp_suspend NULL +#define pxa3xx_mfp_resume NULL +#endif -static struct sysdev_class mfp_sysclass = { +struct sysdev_class pxa3xx_mfp_sysclass = { .name = "mfp", .suspend = pxa3xx_mfp_suspend, .resume = pxa3xx_mfp_resume, }; -static struct sys_device mfp_device = { - .id = 0, - .cls = &mfp_sysclass, -}; - static int __init mfp_init_devicefs(void) { - sysdev_class_register(&mfp_sysclass); - return sysdev_register(&mfp_device); + if (cpu_is_pxa3xx()) + return sysdev_class_register(&pxa3xx_mfp_sysclass); + + return 0; } -device_initcall(mfp_init_devicefs); -#endif +postcore_initcall(mfp_init_devicefs); diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index c14696b9979d..3b945eb0aee3 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -29,6 +29,7 @@ #include <asm/mach/arch.h> #include <asm/arch/hardware.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/pxa2xx-regs.h> #include <asm/arch/pxa2xx_spi.h> #include <asm/arch/pcm027.h> diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 3dda16a20049..49d951db0f3d 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -23,8 +23,16 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/ide.h> +#include <linux/i2c.h> + +#include <media/soc_camera.h> + +#include <asm/gpio.h> +#include <asm/arch/i2c.h> +#include <asm/arch/camera.h> #include <asm/mach/map.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/mmc.h> #include <asm/arch/ohci.h> #include <asm/arch/pcm990_baseboard.h> @@ -258,6 +266,73 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = { }; /* + * PXA27x Camera specific stuff + */ +#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) +static int pcm990_pxacamera_init(struct device *dev) +{ + pxa_gpio_mode(GPIO98_CIF_DD_0_MD); + pxa_gpio_mode(GPIO105_CIF_DD_1_MD); + pxa_gpio_mode(GPIO104_CIF_DD_2_MD); + pxa_gpio_mode(GPIO103_CIF_DD_3_MD); + pxa_gpio_mode(GPIO95_CIF_DD_4_MD); + pxa_gpio_mode(GPIO94_CIF_DD_5_MD); + pxa_gpio_mode(GPIO93_CIF_DD_6_MD); + pxa_gpio_mode(GPIO108_CIF_DD_7_MD); + pxa_gpio_mode(GPIO107_CIF_DD_8_MD); + pxa_gpio_mode(GPIO106_CIF_DD_9_MD); + pxa_gpio_mode(GPIO42_CIF_MCLK_MD); + pxa_gpio_mode(GPIO45_CIF_PCLK_MD); + pxa_gpio_mode(GPIO43_CIF_FV_MD); + pxa_gpio_mode(GPIO44_CIF_LV_MD); + + return 0; +} + +/* + * CICR4: PCLK_EN: Pixel clock is supplied by the sensor + * MCLK_EN: Master clock is generated by PXA + * PCP: Data sampled on the falling edge of pixel clock + */ +struct pxacamera_platform_data pcm990_pxacamera_platform_data = { + .init = pcm990_pxacamera_init, + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/, + .mclk_10khz = 1000, +}; + +#include <linux/i2c/pca953x.h> + +static struct pca953x_platform_data pca9536_data = { + .gpio_base = NR_BUILTIN_GPIO + 1, +}; + +static struct soc_camera_link iclink[] = { + { + .bus_id = 0, /* Must match with the camera ID above */ + .gpio = NR_BUILTIN_GPIO + 1, + }, { + .bus_id = 0, /* Must match with the camera ID above */ + } +}; + +/* Board I2C devices. */ +static struct i2c_board_info __initdata pcm990_i2c_devices[] = { + { + /* Must initialize before the camera(s) */ + I2C_BOARD_INFO("pca9536", 0x41), + .platform_data = &pca9536_data, + }, { + I2C_BOARD_INFO("mt9v022", 0x48), + .platform_data = &iclink[0], /* With extender */ + }, { + I2C_BOARD_INFO("mt9m001", 0x5d), + .platform_data = &iclink[0], /* With extender */ + }, +}; +#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */ + +/* * AC97 support * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ */ @@ -326,5 +401,14 @@ void __init pcm990_baseboard_init(void) /* USB host */ pxa_set_ohci_info(&pcm990_ohci_platform_data); + pxa_set_i2c_info(NULL); + +#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) + pxa_set_camera_info(&pcm990_pxacamera_platform_data); + + i2c_register_board_info(0, pcm990_i2c_devices, + ARRAY_SIZE(pcm990_i2c_devices)); +#endif + printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n"); } diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 039194cbe477..7d4debbdcca3 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -42,20 +42,17 @@ int pxa_pm_enter(suspend_state_t state) if (state != PM_SUSPEND_STANDBY) { pxa_cpu_pm_fns->save(sleep_save); /* before sleeping, calculate and save a checksum */ - for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) + for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) sleep_save_checksum += sleep_save[i]; } - /* Clear sleep reset status */ - RCSR = RCSR_SMR; - /* *** go zzz *** */ pxa_cpu_pm_fns->enter(state); cpu_init(); if (state != PM_SUSPEND_STANDBY) { /* after sleeping, validate the checksum */ - for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) + for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) checksum += sleep_save[i]; /* if invalid, display message and wait for a hardware reset */ @@ -101,7 +98,8 @@ static int __init pxa_pm_init(void) return -EINVAL; } - sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL); + sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long), + GFP_KERNEL); if (!sleep_save) { printk(KERN_ERR "failed to alloc memory for pm save\n"); return -ENOMEM; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 209eabf0ed3e..0b30f25cff3c 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -32,6 +32,7 @@ #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> #include <asm/arch/irda.h> @@ -325,13 +326,11 @@ static struct platform_device *devices[] __initdata = { static void poodle_poweroff(void) { - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; arm_machine_restart('h'); } static void poodle_restart(char mode) { - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; arm_machine_restart('h'); } diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 599e53fcc2c5..e5b417d14bb0 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -26,6 +26,7 @@ #include <asm/hardware.h> #include <asm/arch/irqs.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/mfp-pxa25x.h> #include <asm/arch/pm.h> #include <asm/arch/dma.h> @@ -129,6 +130,8 @@ static struct clk pxa25x_clks[] = { INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev), INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev), + INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL), + /* INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), @@ -147,9 +150,7 @@ static struct clk pxa25x_clks[] = { * More ones like CP and general purpose register values are preserved * with the stack pointer in sleep.S. */ -enum { SLEEP_SAVE_START = 0, - - SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, +enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, @@ -159,7 +160,7 @@ enum { SLEEP_SAVE_START = 0, SLEEP_SAVE_CKEN, - SLEEP_SAVE_SIZE + SLEEP_SAVE_COUNT }; @@ -197,6 +198,9 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save) static void pxa25x_cpu_pm_enter(suspend_state_t state) { + /* Clear reset status */ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + switch (state) { case PM_SUSPEND_MEM: /* set resume return address */ @@ -207,7 +211,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) } static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = { - .save_size = SLEEP_SAVE_SIZE, + .save_count = SLEEP_SAVE_COUNT, .valid = suspend_valid_only_mem, .save = pxa25x_cpu_pm_save, .restore = pxa25x_cpu_pm_restore, @@ -228,24 +232,10 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(unsigned int irq, unsigned int on) { int gpio = IRQ_TO_GPIO(irq); - uint32_t gpio_bit, mask = 0; - - if (gpio >= 0 && gpio <= 15) { - gpio_bit = GPIO_bit(gpio); - mask = gpio_bit; - if (on) { - if (GRER(gpio) | gpio_bit) - PRER |= gpio_bit; - else - PRER &= ~gpio_bit; - - if (GFER(gpio) | gpio_bit) - PFER |= gpio_bit; - else - PFER &= ~gpio_bit; - } - goto set_pwer; - } + uint32_t mask = 0; + + if (gpio >= 0 && gpio < 85) + return gpio_set_wake(gpio, on); if (irq == IRQ_RTCAlrm) { mask = PWER_RTC; @@ -265,9 +255,8 @@ set_pwer: void __init pxa25x_init_irq(void) { - pxa_init_irq_low(); - pxa_init_irq_gpio(85); - pxa_init_irq_set_wake(pxa25x_set_wake); + pxa_init_irq(32, pxa25x_set_wake); + pxa_init_gpio(85, pxa25x_set_wake); } static struct platform_device *pxa25x_devices[] __initdata = { @@ -325,4 +314,4 @@ static int __init pxa25x_init(void) return ret; } -subsys_initcall(pxa25x_init); +postcore_initcall(pxa25x_init); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 46a951c3e5a0..7e945836e129 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -23,6 +23,7 @@ #include <asm/arch/irqs.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/mfp-pxa27x.h> #include <asm/arch/ohci.h> #include <asm/arch/pm.h> #include <asm/arch/dma.h> @@ -151,12 +152,15 @@ static struct clk pxa27x_clks[] = { INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev), INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), - INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), + INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev), INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), + INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL), + INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL), + /* INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), @@ -177,9 +181,7 @@ static struct clk pxa27x_clks[] = { * More ones like CP and general purpose register values are preserved * with the stack pointer in sleep.S. */ -enum { SLEEP_SAVE_START = 0, - - SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3, +enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3, SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, @@ -194,7 +196,7 @@ enum { SLEEP_SAVE_START = 0, SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, - SLEEP_SAVE_SIZE + SLEEP_SAVE_COUNT }; void pxa27x_cpu_pm_save(unsigned long *sleep_save) @@ -247,6 +249,9 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) /* Clear edge-detect status register. */ PEDR = 0xDF12FE1B; + /* Clear reset status */ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + switch (state) { case PM_SUSPEND_STANDBY: pxa_cpu_standby(); @@ -265,7 +270,7 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state) } static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = { - .save_size = SLEEP_SAVE_SIZE, + .save_count = SLEEP_SAVE_COUNT, .save = pxa27x_cpu_pm_save, .restore = pxa27x_cpu_pm_restore, .valid = pxa27x_cpu_pm_valid, @@ -283,37 +288,16 @@ static inline void pxa27x_init_pm(void) {} /* PXA27x: Various gpios can issue wakeup events. This logic only * handles the simple cases, not the WEMUX2 and WEMUX3 options */ -#define PXA27x_GPIO_NOWAKE_MASK \ - ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) -#define WAKEMASK(gpio) \ - (((gpio) <= 15) \ - ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ - : ((gpio == 35) ? (1 << 24) : 0)) - static int pxa27x_set_wake(unsigned int irq, unsigned int on) { int gpio = IRQ_TO_GPIO(irq); uint32_t mask; - if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) { - if (WAKEMASK(gpio) == 0) - return -EINVAL; - - mask = WAKEMASK(gpio); + if (gpio >= 0 && gpio < 128) + return gpio_set_wake(gpio, on); - if (on) { - if (GRER(gpio) | GPIO_bit(gpio)) - PRER |= mask; - else - PRER &= ~mask; - - if (GFER(gpio) | GPIO_bit(gpio)) - PFER |= mask; - else - PFER &= ~mask; - } - goto set_pwer; - } + if (irq == IRQ_KEYPAD) + return keypad_set_wake(on); switch (irq) { case IRQ_RTCAlrm: @@ -326,7 +310,6 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on) return -EINVAL; } -set_pwer: if (on) PWER |= mask; else @@ -337,10 +320,8 @@ set_pwer: void __init pxa27x_init_irq(void) { - pxa_init_irq_low(); - pxa_init_irq_high(); - pxa_init_irq_gpio(128); - pxa_init_irq_set_wake(pxa27x_set_wake); + pxa_init_irq(34, pxa27x_set_wake); + pxa_init_gpio(128, pxa27x_set_wake); } /* @@ -386,10 +367,6 @@ static struct platform_device *devices[] __initdata = { static struct sys_device pxa27x_sysdev[] = { { - .id = 0, - .cls = &pxa_irq_sysclass, - }, { - .id = 1, .cls = &pxa_irq_sysclass, }, { .cls = &pxa_gpio_sysclass, @@ -420,4 +397,4 @@ static int __init pxa27x_init(void) return ret; } -subsys_initcall(pxa27x_init); +postcore_initcall(pxa27x_init); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 35f25fdaeba3..644550bfa330 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -110,6 +110,25 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void) } /* + * Return the current AC97 clock frequency. + */ +static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk) +{ + unsigned long rate = 312000000; + unsigned long ac97_div; + + ac97_div = AC97_DIV; + + /* This may loose precision for some rates but won't for the + * standard 24.576MHz. + */ + rate /= (ac97_div >> 12) & 0x7fff; + rate *= (ac97_div & 0xfff); + + return rate; +} + +/* * Return the current HSIO bus clock frequency */ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk) @@ -156,6 +175,27 @@ static const struct clkops clk_pxa3xx_hsio_ops = { .getrate = clk_pxa3xx_hsio_getrate, }; +static const struct clkops clk_pxa3xx_ac97_ops = { + .enable = clk_pxa3xx_cken_enable, + .disable = clk_pxa3xx_cken_disable, + .getrate = clk_pxa3xx_ac97_getrate, +}; + +static void clk_pout_enable(struct clk *clk) +{ + OSCC |= OSCC_PEN; +} + +static void clk_pout_disable(struct clk *clk) +{ + OSCC &= ~OSCC_PEN; +} + +static const struct clkops clk_pout_ops = { + .enable = clk_pout_enable, + .disable = clk_pout_disable, +}; + #define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev) \ { \ .name = _name, \ @@ -175,8 +215,16 @@ static const struct clkops clk_pxa3xx_hsio_ops = { } static struct clk pxa3xx_clks[] = { - PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), - PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), + { + .name = "CLK_POUT", + .ops = &clk_pout_ops, + .rate = 13000000, + .delay = 70, + }, + + PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), + PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), + PXA3xx_CK("AC97CLK", AC97, &clk_pxa3xx_ac97_ops, NULL), PXA3xx_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), PXA3xx_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), @@ -185,6 +233,7 @@ static struct clk pxa3xx_clks[] = { PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev), + PXA3xx_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev), PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), @@ -207,12 +256,11 @@ static unsigned long wakeup_src; #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] -enum { SLEEP_SAVE_START = 0, - SLEEP_SAVE_CKENA, +enum { SLEEP_SAVE_CKENA, SLEEP_SAVE_CKENB, SLEEP_SAVE_ACCR, - SLEEP_SAVE_SIZE, + SLEEP_SAVE_COUNT, }; static void pxa3xx_cpu_pm_save(unsigned long *sleep_save) @@ -305,8 +353,10 @@ static void pxa3xx_cpu_pm_enter(suspend_state_t state) /* * Don't sleep if no wakeup sources are defined */ - if (wakeup_src == 0) + if (wakeup_src == 0) { + printk(KERN_ERR "Not suspending: no wakeup sources\n"); return; + } switch (state) { case PM_SUSPEND_STANDBY: @@ -325,7 +375,7 @@ static int pxa3xx_cpu_pm_valid(suspend_state_t state) } static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = { - .save_size = SLEEP_SAVE_SIZE, + .save_count = SLEEP_SAVE_COUNT, .save = pxa3xx_cpu_pm_save, .restore = pxa3xx_cpu_pm_restore, .valid = pxa3xx_cpu_pm_valid, @@ -435,6 +485,8 @@ static int pxa3xx_set_wake(unsigned int irq, unsigned int on) case IRQ_MMC3: mask = ADXER_MFP_GEN12; break; + default: + return -EINVAL; } local_irq_save(flags); @@ -446,15 +498,9 @@ static int pxa3xx_set_wake(unsigned int irq, unsigned int on) return 0; } - -static void pxa3xx_init_irq_pm(void) -{ - pxa_init_irq_set_wake(pxa3xx_set_wake); -} - #else static inline void pxa3xx_init_pm(void) {} -static inline void pxa3xx_init_irq_pm(void) {} +#define pxa3xx_set_wake NULL #endif void __init pxa3xx_init_irq(void) @@ -465,10 +511,8 @@ void __init pxa3xx_init_irq(void) value |= (1 << 6); __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); - pxa_init_irq_low(); - pxa_init_irq_high(); - pxa_init_irq_gpio(128); - pxa3xx_init_irq_pm(); + pxa_init_irq(56, pxa3xx_set_wake); + pxa_init_gpio(128, NULL); } /* @@ -490,11 +534,9 @@ static struct platform_device *devices[] __initdata = { static struct sys_device pxa3xx_sysdev[] = { { - .id = 0, .cls = &pxa_irq_sysclass, }, { - .id = 1, - .cls = &pxa_irq_sysclass, + .cls = &pxa3xx_mfp_sysclass, }, { .cls = &pxa_gpio_sysclass, }, @@ -532,4 +574,4 @@ static int __init pxa3xx_init(void) return ret; } -subsys_initcall(pxa3xx_init); +postcore_initcall(pxa3xx_init); diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index f9d1b61e1185..34cd585075b0 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -26,6 +26,7 @@ #include <asm/mach-types.h> #include <asm/arch/pm.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/sharpsl.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 9e7773fca01c..e7d0fcd9b43f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -37,6 +37,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/irda.h> #include <asm/arch/mmc.h> #include <asm/arch/ohci.h> @@ -528,8 +529,6 @@ static struct platform_device *devices[] __initdata = { static void spitz_poweroff(void) { - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; - pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT); GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 745a4dc7acdd..23f050feb208 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -26,6 +26,7 @@ #include <asm/arch/sharpsl.h> #include <asm/arch/spitz.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ @@ -118,9 +119,6 @@ static void spitz_presuspend(void) /* nRESET_OUT Disable */ PSLR |= PSLR_SL_ROD; - /* Clear reset status */ - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; - /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ PCFR = PCFR_GPR_EN | PCFR_OPDE; } diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 00af7f2fed66..0bb31982fb6f 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label) mutex_unlock(&ssp_lock); - if (ssp->port_id != port) + if (&ssp->node == &ssp_list) return NULL; return ssp; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index f99112d50b41..ab4a9f579913 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -23,6 +23,7 @@ #include <linux/delay.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/gpio.h> #include <asm/setup.h> #include <asm/memory.h> @@ -32,7 +33,9 @@ #include <asm/system.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/mfp-pxa25x.h> #include <asm/arch/irda.h> +#include <asm/arch/i2c.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> @@ -47,6 +50,110 @@ #include "generic.h" #include "devices.h" +static unsigned long tosa_pin_config[] = { + GPIO78_nCS_2, /* Scoop */ + GPIO80_nCS_4, /* tg6393xb */ + GPIO33_nCS_5, /* Scoop */ + + // GPIO76 CARD_VCC_ON1 + + GPIO19_GPIO, /* Reset out */ + GPIO1_RST | WAKEUP_ON_EDGE_FALL, + + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */ + GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */ + GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */ + GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */ + GPIO20_GPIO, /* EAR_IN */ + GPIO22_GPIO, /* On */ + + GPIO5_GPIO, /* USB_IN */ + GPIO32_GPIO, /* Pen IRQ */ + + GPIO7_GPIO, /* Jacket Detect */ + GPIO14_GPIO, /* BAT0_CRG */ + GPIO12_GPIO, /* BAT1_CRG */ + GPIO17_GPIO, /* BAT0_LOW */ + GPIO84_GPIO, /* BAT1_LOW */ + GPIO38_GPIO, /* BAT_LOCK */ + + GPIO11_3_6MHz, + GPIO15_GPIO, /* TC6393XB IRQ */ + GPIO18_RDY, + GPIO27_GPIO, /* LCD Sync */ + + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + GPIO9_GPIO, /* Detect */ + // GPIO10 nSD_INT + + /* CF */ + GPIO13_GPIO, /* CD_IRQ */ + GPIO21_GPIO, /* Main Slot IRQ */ + GPIO36_GPIO, /* Jacket Slot IRQ */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* AC97 */ + GPIO31_AC97_SYNC, + GPIO30_AC97_SDATA_OUT, + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + // GPIO79 nAUD_IRQ + + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO35_FFUART_CTS, + GPIO37_FFUART_DSR, + GPIO39_FFUART_TXD, + GPIO40_FFUART_DTR, + GPIO41_FFUART_RTS, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* IrDA */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* Keybd */ + GPIO58_GPIO, + GPIO59_GPIO, + GPIO60_GPIO, + GPIO61_GPIO, + GPIO62_GPIO, + GPIO63_GPIO, + GPIO64_GPIO, + GPIO65_GPIO, + GPIO66_GPIO, + GPIO67_GPIO, + GPIO68_GPIO, + GPIO69_GPIO, + GPIO70_GPIO, + GPIO71_GPIO, + GPIO72_GPIO, + GPIO73_GPIO, + GPIO74_GPIO, + GPIO75_GPIO, + + /* SPI */ + GPIO81_SSP2_CLK_OUT, + GPIO82_SSP2_FRM_OUT, + GPIO83_SSP2_TXD, +}; + /* * SCOOP Device */ @@ -60,11 +167,10 @@ static struct resource tosa_scoop_resources[] = { static struct scoop_config tosa_scoop_setup = { .io_dir = TOSA_SCOOP_IO_DIR, - .io_out = TOSA_SCOOP_IO_OUT, - + .gpio_base = TOSA_SCOOP_GPIO_BASE, }; -struct platform_device tosascoop_device = { +static struct platform_device tosascoop_device = { .name = "sharp-scoop", .id = 0, .dev = { @@ -88,10 +194,10 @@ static struct resource tosa_scoop_jc_resources[] = { static struct scoop_config tosa_scoop_jc_setup = { .io_dir = TOSA_SCOOP_JC_IO_DIR, - .io_out = TOSA_SCOOP_JC_IO_OUT, + .gpio_base = TOSA_SCOOP_JC_GPIO_BASE, }; -struct platform_device tosascoop_jc_device = { +static struct platform_device tosascoop_jc_device = { .name = "sharp-scoop", .id = 1, .dev = { @@ -118,50 +224,16 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { }, }; -static void tosa_pcmcia_init(void) -{ - /* Setup default state of GPIO outputs - before we enable them as outputs. */ - GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | - GPIO_bit(GPIO53_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - pxa_gpio_mode(GPIO52_nPCE_1_MD); - pxa_gpio_mode(GPIO53_nPCE_2_MD); - pxa_gpio_mode(GPIO54_pSKTSEL_MD); -} - static struct scoop_pcmcia_config tosa_pcmcia_config = { .devs = &tosa_pcmcia_scoop[0], .num_devs = 2, - .pcmcia_init = tosa_pcmcia_init, }; /* * USB Device Controller */ -static void tosa_udc_command(int cmd) -{ - switch(cmd) { - case PXA2XX_UDC_CMD_CONNECT: - set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); - break; - case PXA2XX_UDC_CMD_DISCONNECT: - reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); - break; - } -} - static struct pxa2xx_udc_mach_info udc_info __initdata = { - .udc_command = tosa_udc_command, + .gpio_pullup = TOSA_GPIO_USB_PULLUP, .gpio_vbus = TOSA_GPIO_USB_IN, .gpio_vbus_inverted = 1, }; @@ -175,19 +247,44 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void { int err; - /* setup GPIO for PXA25x MMC controller */ - pxa_gpio_mode(GPIO6_MMCCLK_MD); - pxa_gpio_mode(GPIO8_MMCCS0_MD); - pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN); - tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC/SD card detect", data); - if (err) + if (err) { printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + goto err_irq; + } + + err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n"); + goto err_gpio_wp; + } + err = gpio_direction_input(TOSA_GPIO_SD_WP); + if (err) + goto err_gpio_wp_dir; + err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); + goto err_gpio_pwr; + } + err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0); + if (err) + goto err_gpio_pwr_dir; + + return 0; + +err_gpio_pwr_dir: + gpio_free(TOSA_GPIO_PWR_ON); +err_gpio_pwr: +err_gpio_wp_dir: + gpio_free(TOSA_GPIO_SD_WP); +err_gpio_wp: + free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); +err_irq: return err; } @@ -196,19 +293,21 @@ static void tosa_mci_setpower(struct device *dev, unsigned int vdd) struct pxamci_platform_data* p_d = dev->platform_data; if (( 1 << vdd) & p_d->ocr_mask) { - set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + gpio_set_value(TOSA_GPIO_PWR_ON, 1); } else { - reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + gpio_set_value(TOSA_GPIO_PWR_ON, 0); } } static int tosa_mci_get_ro(struct device *dev) { - return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); + return gpio_get_value(TOSA_GPIO_SD_WP); } static void tosa_mci_exit(struct device *dev, void *data) { + gpio_free(TOSA_GPIO_PWR_ON); + gpio_free(TOSA_GPIO_SD_WP); free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); } @@ -223,21 +322,36 @@ static struct pxamci_platform_data tosa_mci_platform_data = { /* * Irda */ -static void tosa_irda_transceiver_mode(struct device *dev, int mode) +static int tosa_irda_startup(struct device *dev) { - if (mode & IR_OFF) { - reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); - pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW); - pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT); - } else { - pxa_gpio_mode(GPIO47_STTXD_MD); - set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + int ret; + + ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown"); + if (ret) + return ret; + + ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0); + if (ret) + gpio_free(TOSA_GPIO_IR_POWERDWN); + + return ret; } + +static void tosa_irda_shutdown(struct device *dev) +{ + gpio_free(TOSA_GPIO_IR_POWERDWN); +} + +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF)); } static struct pxaficp_platform_data tosa_ficp_platform_data = { .transceiver_cap = IR_SIRMODE | IR_OFF, .transceiver_mode = tosa_irda_transceiver_mode, + .startup = tosa_irda_startup, + .shutdown = tosa_irda_shutdown, }; /* @@ -249,12 +363,28 @@ static struct platform_device tosakbd_device = { }; static struct gpio_keys_button tosa_gpio_keys[] = { + /* + * Two following keys are directly tied to "ON" button of tosa. Why? + * The first one can be used as a wakeup source, the second can't; + * also the first one is OR of ac_powered and on_button. + */ + { + .type = EV_PWR, + .code = KEY_RESERVED, + .gpio = TOSA_GPIO_POWERON, + .desc = "Poweron", + .wakeup = 1, + .active_low = 1, + }, { .type = EV_PWR, .code = KEY_SUSPEND, .gpio = TOSA_GPIO_ON_KEY, .desc = "On key", - .wakeup = 1, + /* + * can't be used as wakeup + * .wakeup = 1, + */ .active_low = 1, }, { @@ -291,9 +421,40 @@ static struct platform_device tosa_gpio_keys_device = { /* * Tosa LEDs */ +static struct gpio_led tosa_gpio_leds[] = { + { + .name = "tosa:amber:charge", + .default_trigger = "main-battery-charging", + .gpio = TOSA_GPIO_CHRG_ERR_LED, + }, + { + .name = "tosa:green:mail", + .default_trigger = "nand-disk", + .gpio = TOSA_GPIO_NOTE_LED, + }, + { + .name = "tosa:dual:wlan", + .default_trigger = "none", + .gpio = TOSA_GPIO_WLAN_LED, + }, + { + .name = "tosa:blue:bluetooth", + .default_trigger = "none", + .gpio = TOSA_GPIO_BT_LED, + }, +}; + +static struct gpio_led_platform_data tosa_gpio_leds_platform_data = { + .leds = tosa_gpio_leds, + .num_leds = ARRAY_SIZE(tosa_gpio_leds), +}; + static struct platform_device tosaled_device = { - .name = "tosa-led", - .id = -1, + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &tosa_gpio_leds_platform_data, + }, }; static struct platform_device *devices[] __initdata = { @@ -306,10 +467,8 @@ static struct platform_device *devices[] __initdata = { static void tosa_poweroff(void) { - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; - - pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT); - GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET); + gpio_direction_output(TOSA_GPIO_ON_RESET, 0); + gpio_set_value(TOSA_GPIO_ON_RESET, 1); mdelay(1000); arm_machine_restart('h'); @@ -326,20 +485,13 @@ static void tosa_restart(char mode) static void __init tosa_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); + gpio_set_wake(MFP_PIN_GPIO1, 1); + /* We can't pass to gpio-keys since it will drop the Reset altfunc */ + pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; - pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); - pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); - pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x00000000; - PGSR1 = 0x00FF0002; - PGSR2 = 0x00014000; PCFR |= PCFR_OPDE; /* enable batt_fault */ @@ -348,6 +500,7 @@ static void __init tosa_init(void) pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); + pxa_set_i2c_info(NULL); platform_scoop_config = &tosa_pcmcia_config; platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index f207fcd30cd7..931885d86b91 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -41,6 +41,7 @@ #include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/trizeps4.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index afd2cbfca0d9..4a0028087ea6 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -26,6 +26,7 @@ #include <asm/arch/pxafb.h> #include <asm/arch/zylonite.h> #include <asm/arch/mmc.h> +#include <asm/arch/pxa27x_keypad.h> #include "generic.h" @@ -35,6 +36,8 @@ struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; int gpio_backlight; int gpio_eth_irq; +int wm9713_irq; + int lcd_id; int lcd_orientation; @@ -94,8 +97,7 @@ static struct pxafb_mode_info toshiba_ltm04c380k_mode = { static struct pxafb_mach_info zylonite_toshiba_lcd_info = { .num_modes = 1, - .lccr0 = LCCR0_Act, - .lccr3 = LCCR3_PCP, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, .pxafb_backlight_power = zylonite_backlight_power, }; @@ -131,8 +133,7 @@ static struct pxafb_mode_info sharp_ls037_modes[] = { static struct pxafb_mach_info zylonite_sharp_lcd_info = { .modes = sharp_ls037_modes, .num_modes = 2, - .lccr0 = LCCR0_Act, - .lccr3 = LCCR3_PCP | LCCR3_HSP | LCCR3_VSP, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, .pxafb_backlight_power = zylonite_backlight_power, }; @@ -249,6 +250,71 @@ static void __init zylonite_init_mmc(void) static inline void zylonite_init_mmc(void) {} #endif +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES) +static unsigned int zylonite_matrix_key_map[] = { + /* KEY(row, col, key_code) */ + KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D), + KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H), + KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L), + KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P), + KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T), + KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X), + KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z), + + KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3), + KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7), + KEY(4, 3, KEY_8), KEY(3, 4, KEY_9), + + KEY(4, 5, KEY_SPACE), + KEY(5, 3, KEY_KPASTERISK), /* * */ + KEY(5, 4, KEY_KPDOT), /* #" */ + + KEY(0, 7, KEY_UP), + KEY(1, 7, KEY_DOWN), + KEY(2, 7, KEY_LEFT), + KEY(3, 7, KEY_RIGHT), + KEY(2, 6, KEY_HOME), + KEY(3, 6, KEY_END), + KEY(6, 4, KEY_DELETE), + KEY(6, 6, KEY_BACK), + KEY(6, 3, KEY_CAPSLOCK), /* KEY_LEFTSHIFT), */ + + KEY(4, 6, KEY_ENTER), /* scroll push */ + KEY(5, 7, KEY_ENTER), /* keypad action */ + + KEY(0, 4, KEY_EMAIL), + KEY(5, 6, KEY_SEND), + KEY(4, 0, KEY_CALENDAR), + KEY(7, 6, KEY_RECORD), + KEY(6, 7, KEY_VOLUMEUP), + KEY(7, 7, KEY_VOLUMEDOWN), + + KEY(0, 6, KEY_F22), /* soft1 */ + KEY(1, 6, KEY_F23), /* soft2 */ + KEY(0, 3, KEY_AUX), /* contact */ +}; + +static struct pxa27x_keypad_platform_data zylonite_keypad_info = { + .matrix_key_rows = 8, + .matrix_key_cols = 8, + .matrix_key_map = zylonite_matrix_key_map, + .matrix_key_map_size = ARRAY_SIZE(zylonite_matrix_key_map), + + .enable_rotary0 = 1, + .rotary0_up_key = KEY_UP, + .rotary0_down_key = KEY_DOWN, + + .debounce_interval = 30, +}; + +static void __init zylonite_init_keypad(void) +{ + pxa_set_keypad_info(&zylonite_keypad_info); +} +#else +static inline void zylonite_init_keypad(void) {} +#endif + static void __init zylonite_init(void) { /* board-processor specific initialization */ @@ -265,6 +331,7 @@ static void __init zylonite_init(void) zylonite_init_lcd(); zylonite_init_mmc(); + zylonite_init_keypad(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 6ac04c09b0e9..324fb9daae28 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -21,7 +21,7 @@ #include <asm/arch/mfp-pxa300.h> #include <asm/arch/zylonite.h> -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) +#include "generic.h" /* PXA300/PXA310 common configurations */ static mfp_cfg_t common_mfp_cfg[] __initdata = { @@ -69,6 +69,9 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + /* WM9713 IRQ */ + GPIO26_GPIO, + /* Keypad */ GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH, GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH, @@ -203,6 +206,9 @@ void __init zylonite_pxa300_init(void) /* MMC card detect & write protect for controller 0 */ zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0); zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2); + + /* WM9713 IRQ */ + wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26); } if (cpu_is_pxa300()) { diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index dfa79992b8ab..193d07903b06 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -21,7 +21,7 @@ #include <asm/arch/mfp-pxa320.h> #include <asm/arch/zylonite.h> -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) +#include "generic.h" static mfp_cfg_t mfp_cfg[] __initdata = { /* LCD */ @@ -68,6 +68,9 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + /* WM9713 IRQ */ + GPIO15_GPIO, + /* I2C */ GPIO32_I2C_SCL, GPIO33_I2C_SDA, @@ -190,5 +193,8 @@ void __init zylonite_pxa320_init(void) /* MMC card detect & write protect for controller 0 */ zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1); zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5); + + /* WM9713 IRQ */ + wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15); } } diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 39b3bb7f1020..5ccde7cf39e8 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -10,7 +10,6 @@ config MACH_REALVIEW_EB config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore tile" depends on MACH_REALVIEW_EB - select CACHE_L2X0 help Enable support for the ARM11MPCore tile on the Realview platform. @@ -24,4 +23,18 @@ config REALVIEW_EB_ARM11MP_REVB kernel built with this option enabled is not compatible with other revisions of the ARM11MPCore tile. +config MACH_REALVIEW_PB11MP + bool "Support RealView/PB11MPCore platform" + select ARM_GIC + help + Include support for the ARM(R) RealView MPCore Platform Baseboard. + PB11MPCore is a platform with an on-board ARM11MPCore and has + support for PCI-E and Compact Flash. + +config MACH_REALVIEW_PB1176 + bool "Support RealView/PB1176 platform" + select ARM_GIC + help + Include support for the ARM(R) RealView ARM1176 Platform Baseboard. + endmenu diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index ca1e390c3c28..d2ae077431dd 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -4,5 +4,7 @@ obj-y := core.o clock.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o +obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o +obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c index 21325a4da9da..3e706c57833a 100644 --- a/arch/arm/mach-realview/clock.c +++ b/arch/arm/mach-realview/clock.c @@ -16,7 +16,6 @@ #include <linux/clk.h> #include <linux/mutex.h> -#include <asm/semaphore.h> #include <asm/hardware/icst307.h> #include "clock.h" diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 98aefc9f4df3..131990d196f5 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -109,22 +109,21 @@ static struct flash_platform_data realview_flash_data = { .set_vpp = realview_flash_set_vpp, }; -static struct resource realview_flash_resource = { - .start = REALVIEW_FLASH_BASE, - .end = REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - struct platform_device realview_flash_device = { .name = "armflash", .id = 0, .dev = { .platform_data = &realview_flash_data, }, - .num_resources = 1, - .resource = &realview_flash_resource, }; +int realview_flash_register(struct resource *res, u32 num) +{ + realview_flash_device.resource = res; + realview_flash_device.num_resources = num; + return platform_device_register(&realview_flash_device); +} + static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, @@ -445,10 +444,10 @@ void realview_leds_event(led_event_t ledevt) /* * Where is the timer (VA)? */ -#define TIMER0_VA_BASE __io_address(REALVIEW_TIMER0_1_BASE) -#define TIMER1_VA_BASE (__io_address(REALVIEW_TIMER0_1_BASE) + 0x20) -#define TIMER2_VA_BASE __io_address(REALVIEW_TIMER2_3_BASE) -#define TIMER3_VA_BASE (__io_address(REALVIEW_TIMER2_3_BASE) + 0x20) +void __iomem *timer0_va_base; +void __iomem *timer1_va_base; +void __iomem *timer2_va_base; +void __iomem *timer3_va_base; /* * How long is the timer interval? @@ -475,7 +474,7 @@ static void timer_set_mode(enum clock_event_mode mode, switch(mode) { case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); + writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD); ctrl = TIMER_CTRL_PERIODIC; ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE; @@ -491,16 +490,16 @@ static void timer_set_mode(enum clock_event_mode mode, ctrl = 0; } - writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL); + writel(ctrl, timer0_va_base + TIMER_CTRL); } static int timer_set_next_event(unsigned long evt, struct clock_event_device *unused) { - unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL); + unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL); - writel(evt, TIMER0_VA_BASE + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL); + writel(evt, timer0_va_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL); return 0; } @@ -536,7 +535,7 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &timer0_clockevent; /* clear the interrupt */ - writel(1, TIMER0_VA_BASE + TIMER_INTCLR); + writel(1, timer0_va_base + TIMER_INTCLR); evt->event_handler(evt); @@ -551,7 +550,7 @@ static struct irqaction realview_timer_irq = { static cycle_t realview_get_cycles(void) { - return ~readl(TIMER3_VA_BASE + TIMER_VALUE); + return ~readl(timer3_va_base + TIMER_VALUE); } static struct clocksource clocksource_realview = { @@ -566,11 +565,11 @@ static struct clocksource clocksource_realview = { static void __init realview_clocksource_init(void) { /* setup timer 0 as free-running clocksource */ - writel(0, TIMER3_VA_BASE + TIMER_CTRL); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE); + writel(0, timer3_va_base + TIMER_CTRL); + writel(0xffffffff, timer3_va_base + TIMER_LOAD); + writel(0xffffffff, timer3_va_base + TIMER_VALUE); writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - TIMER3_VA_BASE + TIMER_CTRL); + timer3_va_base + TIMER_CTRL); clocksource_realview.mult = clocksource_khz2mult(1000, clocksource_realview.shift); @@ -607,10 +606,10 @@ void __init realview_timer_init(unsigned int timer_irq) /* * Initialise to a known state (all timers off) */ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - writel(0, TIMER3_VA_BASE + TIMER_CTRL); + writel(0, timer0_va_base + TIMER_CTRL); + writel(0, timer1_va_base + TIMER_CTRL); + writel(0, timer2_va_base + TIMER_CTRL); + writel(0, timer3_va_base + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 492a14c0d604..33dbbb41a663 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -55,8 +55,13 @@ extern void __iomem *gic_cpu_base_addr; extern void __iomem *twd_base_addr; extern unsigned int twd_size; #endif +extern void __iomem *timer0_va_base; +extern void __iomem *timer1_va_base; +extern void __iomem *timer2_va_base; +extern void __iomem *timer3_va_base; extern void realview_leds_event(led_event_t ledevt); extern void realview_timer_init(unsigned int timer_irq); +extern int realview_flash_register(struct resource *res, u32 num); #endif diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index de2b7159557d..3e57428affee 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -15,11 +15,14 @@ #include <linux/smp.h> #include <asm/cacheflush.h> -#include <asm/hardware/arm_scu.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/mach-types.h> +#include <asm/arch/board-eb.h> +#include <asm/arch/board-pb11mp.h> +#include <asm/arch/scu.h> + extern void realview_secondary_startup(void); /* @@ -31,9 +34,15 @@ volatile int __cpuinitdata pen_release = -1; static unsigned int __init get_core_count(void) { unsigned int ncores; + void __iomem *scu_base = 0; + + if (machine_is_realview_eb() && core_tile_eb11mp()) + scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE); + else if (machine_is_realview_pb11mp()) + scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE); - if (machine_is_realview_eb() && core_tile_eb11mp()) { - ncores = __raw_readl(__io_address(REALVIEW_EB11MP_SCU_BASE) + SCU_CONFIG); + if (scu_base) { + ncores = __raw_readl(scu_base + SCU_CONFIG); ncores = (ncores & 0x03) + 1; } else ncores = 1; @@ -41,6 +50,26 @@ static unsigned int __init get_core_count(void) return ncores; } +/* + * Setup the SCU + */ +static void scu_enable(void) +{ + u32 scu_ctrl; + void __iomem *scu_base; + + if (machine_is_realview_eb() && core_tile_eb11mp()) + scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE); + else if (machine_is_realview_pb11mp()) + scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE); + else + BUG(); + + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + scu_ctrl |= 1; + __raw_writel(scu_ctrl, scu_base + SCU_CTRL); +} + static DEFINE_SPINLOCK(boot_lock); void __cpuinit platform_secondary_init(unsigned int cpu) @@ -57,7 +86,10 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); + if (machine_is_realview_eb() && core_tile_eb11mp()) + gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); + else if (machine_is_realview_pb11mp()) + gic_cpu_init(0, __io_address(REALVIEW_TC11MP_GIC_CPU_BASE)); /* * let the primary processor know we're out of the @@ -198,7 +230,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in * realview_timer_init */ - if (machine_is_realview_eb() && core_tile_eb11mp()) + if ((machine_is_realview_eb() && core_tile_eb11mp()) || + machine_is_realview_pb11mp()) local_timer_setup(cpu); #endif @@ -210,11 +243,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus) cpu_set(i, cpu_present_map); /* - * Do we need any more CPUs? If so, then let them know where - * to start. Note that, on modern versions of MILO, the "poke" - * doesn't actually do anything until each individual core is - * sent a soft interrupt to get it out of WFI + * Initialise the SCU if there are more than one CPU and let + * them know where to start. Note that, on modern versions of + * MILO, the "poke" doesn't actually do anything until each + * individual core is sent a soft interrupt to get it out of + * WFI */ - if (max_cpus > 1) + if (max_cpus > 1) { + scu_enable(); poke_milo(); + } } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 60d9eb810246..5782d83fd886 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -51,13 +51,13 @@ static struct map_desc realview_eb_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(REALVIEW_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_GIC_CPU_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(REALVIEW_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE), .length = SZ_4K, .type = MT_DEVICE, }, { @@ -66,20 +66,20 @@ static struct map_desc realview_eb_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(REALVIEW_TIMER0_1_BASE), - .pfn = __phys_to_pfn(REALVIEW_TIMER0_1_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(REALVIEW_TIMER2_3_BASE), - .pfn = __phys_to_pfn(REALVIEW_TIMER2_3_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE), .length = SZ_4K, .type = MT_DEVICE, }, #ifdef CONFIG_DEBUG_LL { - .virtual = IO_ADDRESS(REALVIEW_UART0_BASE), - .pfn = __phys_to_pfn(REALVIEW_UART0_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_UART0_BASE), .length = SZ_4K, .type = MT_DEVICE, } @@ -136,12 +136,12 @@ static void __init realview_eb_map_io(void) /* * These devices are connected directly to the multi-layer AHB switch */ -#define SMC_IRQ { NO_IRQ, NO_IRQ } -#define SMC_DMA { 0, 0 } +#define EB_SMC_IRQ { NO_IRQ, NO_IRQ } +#define EB_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } #define MPMC_DMA { 0, 0 } -#define CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define CLCD_DMA { 0, 0 } +#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } +#define EB_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } #define DMAC_DMA { 0, 0 } @@ -150,53 +150,53 @@ static void __init realview_eb_map_io(void) */ #define SCTL_IRQ { NO_IRQ, NO_IRQ } #define SCTL_DMA { 0, 0 } -#define WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define WATCHDOG_DMA { 0, 0 } -#define GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define GPIO0_DMA { 0, 0 } +#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } +#define EB_WATCHDOG_DMA { 0, 0 } +#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } +#define EB_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } #define GPIO1_DMA { 0, 0 } -#define RTC_IRQ { IRQ_EB_RTC, NO_IRQ } -#define RTC_DMA { 0, 0 } +#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } +#define EB_RTC_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge */ #define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } #define SCI_DMA { 7, 6 } -#define UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define UART0_DMA { 15, 14 } -#define UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define UART1_DMA { 13, 12 } -#define UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define UART2_DMA { 11, 10 } -#define UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define UART3_DMA { 0x86, 0x87 } -#define SSP_IRQ { IRQ_EB_SSP, NO_IRQ } -#define SSP_DMA { 9, 8 } +#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } +#define EB_UART0_DMA { 15, 14 } +#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } +#define EB_UART1_DMA { 13, 12 } +#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } +#define EB_UART2_DMA { 11, 10 } +#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } +#define EB_UART3_DMA { 0x86, 0x87 } +#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } +#define EB_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); +AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:00", SMC, NULL); -AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AMBA_DEVICE(smc, "dev:00", EB_SMC, NULL); +AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data); AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL); +AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, NULL); AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); -AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); +AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL); AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); -AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); -AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); -AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL); +AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", EB_UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", EB_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", EB_SSP, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, @@ -223,11 +223,16 @@ static struct amba_device *amba_devs[] __initdata = { /* * RealView EB platform devices */ +static struct resource realview_eb_flash_resource = { + .start = REALVIEW_EB_FLASH_BASE, + .end = REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; -static struct resource realview_eb_smc91x_resources[] = { +static struct resource realview_eb_eth_resources[] = { [0] = { - .start = REALVIEW_ETH_BASE, - .end = REALVIEW_ETH_BASE + SZ_64K - 1, + .start = REALVIEW_EB_ETH_BASE, + .end = REALVIEW_EB_ETH_BASE + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -237,13 +242,36 @@ static struct resource realview_eb_smc91x_resources[] = { }, }; -static struct platform_device realview_eb_smc91x_device = { - .name = "smc91x", +static struct platform_device realview_eb_eth_device = { .id = 0, - .num_resources = ARRAY_SIZE(realview_eb_smc91x_resources), - .resource = realview_eb_smc91x_resources, + .num_resources = ARRAY_SIZE(realview_eb_eth_resources), + .resource = realview_eb_eth_resources, }; +/* + * Detect and register the correct Ethernet device. RealView/EB rev D + * platforms use the newer SMSC LAN9118 Ethernet chip + */ +static int eth_device_register(void) +{ + void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K); + u32 idrev; + + if (!eth_addr) + return -ENOMEM; + + idrev = readl(eth_addr + 0x50); + if ((idrev & 0xFFFF0000) == 0x01180000) + /* SMSC LAN9118 chip present */ + realview_eb_eth_device.name = "smc911x"; + else + /* SMSC 91C111 chip present */ + realview_eb_eth_device.name = "smc91x"; + + iounmap(eth_addr); + return platform_device_register(&realview_eb_eth_device); +} + static void __init gic_init_irq(void) { if (core_tile_eb11mp()) { @@ -263,14 +291,14 @@ static void __init gic_init_irq(void) #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB /* board GIC, secondary */ - gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64); - gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE)); + gic_dist_init(1, __io_address(REALVIEW_EB_GIC_DIST_BASE), 64); + gic_cpu_init(1, __io_address(REALVIEW_EB_GIC_CPU_BASE)); gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1); #endif } else { /* board GIC, primary */ - gic_cpu_base_addr = __io_address(REALVIEW_GIC_CPU_BASE); - gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29); + gic_cpu_base_addr = __io_address(REALVIEW_EB_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_EB_GIC_DIST_BASE), 29); gic_cpu_init(0, gic_cpu_base_addr); } } @@ -301,14 +329,19 @@ static void realview_eb11mp_fixup(void) kmi1_device.irq[0] = IRQ_EB11MP_KMI1; /* platform devices */ - realview_eb_smc91x_resources[1].start = IRQ_EB11MP_ETH; - realview_eb_smc91x_resources[1].end = IRQ_EB11MP_ETH; + realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH; + realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH; } static void __init realview_eb_timer_init(void) { unsigned int timer_irq; + timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE); + timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20; + timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE); + timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20; + if (core_tile_eb11mp()) { #ifdef CONFIG_LOCAL_TIMERS twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE); @@ -332,16 +365,18 @@ static void __init realview_eb_init(void) if (core_tile_eb11mp()) { realview_eb11mp_fixup(); +#ifdef CONFIG_CACHE_L2X0 /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled * Bits: .... ...0 0111 1001 0000 .... .... .... */ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); +#endif } clk_register(&realview_clcd_clk); - platform_device_register(&realview_flash_device); - platform_device_register(&realview_eb_smc91x_device); + realview_flash_register(&realview_eb_flash_resource, 1); platform_device_register(&realview_i2c_device); + eth_device_register(); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; @@ -355,8 +390,8 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_UART0_BASE, - .io_pg_offst = (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc, + .phys_io = REALVIEW_EB_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c new file mode 100644 index 000000000000..cf7f576a5860 --- /dev/null +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -0,0 +1,292 @@ +/* + * linux/arch/arm/mach-realview/realview_pb1176.c + * + * Copyright (C) 2008 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/amba/bus.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/icst307.h> +#include <asm/hardware/cache-l2x0.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> +#include <asm/mach/time.h> + +#include <asm/arch/board-pb1176.h> +#include <asm/arch/irqs.h> + +#include "core.h" +#include "clock.h" + +static struct map_desc realview_pb1176_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), + .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_DC1176_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_DC1176_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_DC1176_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_DC1176_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), + .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_TIMER0_1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_TIMER2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_L220_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_L220_BASE), + .length = SZ_8K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_DEBUG_LL + { + .virtual = IO_ADDRESS(REALVIEW_PB1176_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif +}; + +static void __init realview_pb1176_map_io(void) +{ + iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc)); +} + +/* + * RealView PB1176 AMBA devices + */ +#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } +#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } +#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } +#define PB1176_SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } +#define PB1176_CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_PB1176_DMAC, NO_IRQ } +#define DMAC_DMA { 0, 0 } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } +#define PB1176_WATCHDOG_DMA { 0, 0 } +#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } +#define PB1176_GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } +#define PB1176_RTC_DMA { 0, 0 } +#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } +#define PB1176_UART0_DMA { 15, 14 } +#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } +#define PB1176_UART1_DMA { 13, 12 } +#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } +#define PB1176_UART2_DMA { 11, 10 } +#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } +#define PB1176_UART3_DMA { 0x86, 0x87 } +#define PB1176_SSP_IRQ { IRQ_PB1176_SSP, NO_IRQ } +#define PB1176_SSP_DMA { 9, 8 } + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", PB1176_UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", PB1176_SMC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", PB1176_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", PB1176_RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", PB1176_UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", PB1176_UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", PB1176_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", PB1176_SSP, NULL); + +/* Primecells on the NEC ISSP chip */ +AMBA_DEVICE(clcd, "issp:20", PB1176_CLCD, &clcd_plat_data); +//AMBA_DEVICE(dmac, "issp:30", PB1176_DMAC, NULL); + +static struct amba_device *amba_devs[] __initdata = { +// &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +/* + * RealView PB1176 platform devices + */ +static struct resource realview_pb1176_flash_resource = { + .start = REALVIEW_PB1176_FLASH_BASE, + .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource realview_pb1176_smsc911x_resources[] = { + [0] = { + .start = REALVIEW_PB1176_ETH_BASE, + .end = REALVIEW_PB1176_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PB1176_ETH, + .end = IRQ_PB1176_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device realview_pb1176_smsc911x_device = { + .name = "smc911x", + .id = 0, + .num_resources = ARRAY_SIZE(realview_pb1176_smsc911x_resources), + .resource = realview_pb1176_smsc911x_resources, +}; + +static void __init gic_init_irq(void) +{ + /* ARM1176 DevChip GIC, primary */ + gic_cpu_base_addr = __io_address(REALVIEW_DC1176_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_DC1176_GIC_DIST_BASE), IRQ_DC1176_GIC_START); + gic_cpu_init(0, gic_cpu_base_addr); + + /* board GIC, secondary */ + gic_dist_init(1, __io_address(REALVIEW_PB1176_GIC_DIST_BASE), IRQ_PB1176_GIC_START); + gic_cpu_init(1, __io_address(REALVIEW_PB1176_GIC_CPU_BASE)); + gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1); +} + +static void __init realview_pb1176_timer_init(void) +{ + timer0_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE); + timer1_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE) + 0x20; + timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE); + timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20; + + realview_timer_init(IRQ_DC1176_TIMER0); +} + +static struct sys_timer realview_pb1176_timer = { + .init = realview_pb1176_timer_init, +}; + +static void __init realview_pb1176_init(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + /* 128Kb (16Kb/way) 8-way associativity. evmon/parity/share enabled. */ + l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff); +#endif + + clk_register(&realview_clcd_clk); + + realview_flash_register(&realview_pb1176_flash_resource, 1); + platform_device_register(&realview_pb1176_smsc911x_device); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_io = REALVIEW_PB1176_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = realview_pb1176_map_io, + .init_irq = gic_init_irq, + .timer = &realview_pb1176_timer, + .init_machine = realview_pb1176_init, +MACHINE_END diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c new file mode 100644 index 000000000000..f7ce1c5a178a --- /dev/null +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -0,0 +1,342 @@ +/* + * linux/arch/arm/mach-realview/realview_pb11mp.c + * + * Copyright (C) 2008 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/amba/bus.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/icst307.h> +#include <asm/hardware/cache-l2x0.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> +#include <asm/mach/time.h> + +#include <asm/arch/board-pb11mp.h> +#include <asm/arch/irqs.h> + +#include "core.h" +#include "clock.h" + +static struct map_desc realview_pb11mp_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), + .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), + .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TC11MP_L220_BASE), + .pfn = __phys_to_pfn(REALVIEW_TC11MP_L220_BASE), + .length = SZ_8K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_DEBUG_LL + { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif +}; + +static void __init realview_pb11mp_map_io(void) +{ + iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc)); +} + +/* + * RealView PB11MPCore AMBA devices + */ + +#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } +#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } +#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } +#define PB11MP_SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } +#define PB11MP_CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } +#define DMAC_DMA { 0, 0 } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } +#define PB11MP_WATCHDOG_DMA { 0, 0 } +#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } +#define PB11MP_GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } +#define PB11MP_RTC_DMA { 0, 0 } +#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } +#define PB11MP_UART0_DMA { 15, 14 } +#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } +#define PB11MP_UART1_DMA { 13, 12 } +#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } +#define PB11MP_UART2_DMA { 11, 10 } +#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } +#define PB11MP_UART3_DMA { 0x86, 0x87 } +#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } +#define PB11MP_SSP_DMA { 9, 8 } + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", PB11MP_UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", PB11MP_SMC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", PB11MP_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", PB11MP_RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", PB11MP_UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", PB11MP_UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", PB11MP_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", PB11MP_SSP, NULL); + +/* Primecells on the NEC ISSP chip */ +AMBA_DEVICE(clcd, "issp:20", PB11MP_CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "issp:30", DMAC, NULL); + +static struct amba_device *amba_devs[] __initdata = { + &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +/* + * RealView PB11MPCore platform devices + */ +static struct resource realview_pb11mp_flash_resource[] = { + [0] = { + .start = REALVIEW_PB11MP_FLASH0_BASE, + .end = REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PB11MP_FLASH1_BASE, + .end = REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource realview_pb11mp_smsc911x_resources[] = { + [0] = { + .start = REALVIEW_PB11MP_ETH_BASE, + .end = REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TC11MP_ETH, + .end = IRQ_TC11MP_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device realview_pb11mp_smsc911x_device = { + .name = "smc911x", + .id = 0, + .num_resources = ARRAY_SIZE(realview_pb11mp_smsc911x_resources), + .resource = realview_pb11mp_smsc911x_resources, +}; + +struct resource realview_pb11mp_cf_resources[] = { + [0] = { + .start = REALVIEW_PB11MP_CF_BASE, + .end = REALVIEW_PB11MP_CF_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PB11MP_CF_MEM_BASE, + .end = REALVIEW_PB11MP_CF_MEM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = -1, /* FIXME: Find correct irq */ + .end = -1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device realview_pb11mp_cf_device = { + .name = "compactflash", + .id = 0, + .num_resources = ARRAY_SIZE(realview_pb11mp_cf_resources), + .resource = realview_pb11mp_cf_resources, +}; + +static void __init gic_init_irq(void) +{ + unsigned int pldctrl; + + /* new irq mode with no DCC */ + writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); + pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1); + pldctrl |= 2 << 22; + writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1); + writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); + + /* ARM11MPCore test chip GIC, primary */ + gic_cpu_base_addr = __io_address(REALVIEW_TC11MP_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), 29); + gic_cpu_init(0, gic_cpu_base_addr); + + /* board GIC, secondary */ + gic_dist_init(1, __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), IRQ_PB11MP_GIC_START); + gic_cpu_init(1, __io_address(REALVIEW_PB11MP_GIC_CPU_BASE)); + gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1); +} + +static void __init realview_pb11mp_timer_init(void) +{ + timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE); + timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20; + timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE); + timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20; + +#ifdef CONFIG_LOCAL_TIMERS + twd_base_addr = __io_address(REALVIEW_TC11MP_TWD_BASE); + twd_size = REALVIEW_TC11MP_TWD_SIZE; +#endif + realview_timer_init(IRQ_TC11MP_TIMER0_1); +} + +static struct sys_timer realview_pb11mp_timer = { + .init = realview_pb11mp_timer_init, +}; + +static void __init realview_pb11mp_init(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled + * Bits: .... ...0 0111 1001 0000 .... .... .... */ + l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff); +#endif + + clk_register(&realview_clcd_clk); + + realview_flash_register(realview_pb11mp_flash_resource, + ARRAY_SIZE(realview_pb11mp_flash_resource)); + platform_device_register(&realview_pb11mp_smsc911x_device); + platform_device_register(&realview_i2c_device); + platform_device_register(&realview_pb11mp_cf_device); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_io = REALVIEW_PB11MP_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = realview_pb11mp_map_io, + .init_irq = gic_init_irq, + .timer = &realview_pb11mp_timer, + .init_machine = realview_pb11mp_init, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index e2079cf9266f..cd3dc0834b3b 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -97,6 +97,13 @@ config BAST_PC104_IRQ Say Y here to enable the PC104 IRQ routing on the Simtec BAST (EB2410ITX) +config MACH_TCT_HAMMER + bool "TCT Hammer Board" + select CPU_S3C2410 + help + Say Y here if you are using the TinCanTools Hammer Board + <http://www.tincantools.com> + config MACH_VR1000 bool "Thorcom VR1000" select PM_SIMTEC if PM diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 3e7a85594d9c..cabc13ce09e4 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -27,5 +27,6 @@ obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_MACH_OTOM) += mach-otom.o obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 66175471fff3..27f63d5d3a7b 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/dm9000.h> @@ -236,6 +237,36 @@ static struct platform_device bast_device_nor = { /* NAND Flash on BAST board */ +#ifdef CONFIG_PM +static int bast_pm_suspend(struct sys_device *sd, pm_message_t state) +{ + /* ensure that an nRESET is not generated on resume. */ + s3c2410_gpio_setpin(S3C2410_GPA21, 1); + s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT); + + return 0; +} + +static int bast_pm_resume(struct sys_device *sd) +{ + s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT); + return 0; +} + +#else +#define bast_pm_suspend NULL +#define bast_pm_resume NULL +#endif + +static struct sysdev_class bast_pm_sysclass = { + .name = "mach-bast", + .suspend = bast_pm_suspend, + .resume = bast_pm_resume, +}; + +static struct sys_device bast_pm_sysdev = { + .cls = &bast_pm_sysclass, +}; static int smartmedia_map[] = { 0 }; static int chip0_map[] = { 1 }; @@ -343,7 +374,7 @@ static struct resource bast_dm9k_resource[] = { [2] = { .start = IRQ_DM9000, .end = IRQ_DM9000, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, } }; @@ -561,10 +592,10 @@ static void __init bast_map_io(void) { /* initialise the clocks */ - s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.parent = &clk_upll; s3c24xx_dclk0.rate = 12*1000*1000; - s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.parent = &clk_upll; s3c24xx_dclk1.rate = 24*1000*1000; s3c24xx_clkout0.parent = &s3c24xx_dclk0; @@ -586,6 +617,9 @@ static void __init bast_map_io(void) static void __init bast_init(void) { + sysdev_class_register(&bast_pm_sysclass); + sysdev_register(&bast_pm_sysdev); + s3c24xx_fb_set_platdata(&bast_fb_info); platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c new file mode 100644 index 000000000000..d90d445ccfb4 --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -0,0 +1,160 @@ +/* linux/arch/arm/mach-s3c2410/mach-tct_hammer.c + * + * Copyright (c) 2007 TinCanTools + * David Anders <danders@amltd.com> + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * @History: + * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by + * Ben Dooks <ben@simtec.co.uk> + * + ***********************************************************************/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/plat-s3c/regs-serial.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> + +#ifdef CONFIG_MTD_PARTITIONS + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> + +static struct resource tct_hammer_nor_resource = { + .start = 0x00000000, + .end = 0x01000000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition tct_hammer_mtd_partitions[] = { + { + .name = "System", + .size = 0x240000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "JFFS2", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data tct_hammer_flash_data = { + .width = 2, + .parts = tct_hammer_mtd_partitions, + .nr_parts = ARRAY_SIZE(tct_hammer_mtd_partitions), +}; + +static struct platform_device tct_hammer_device_nor = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &tct_hammer_flash_data, + }, + .num_resources = 1, + .resource = &tct_hammer_nor_resource, +}; + +#endif + +static struct map_desc tct_hammer_iodesc[] __initdata = { +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + + +static struct platform_device *tct_hammer_devices[] __initdata = { + &s3c_device_adc, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_usb, + &s3c_device_rtc, + &s3c_device_usbgadget, + &s3c_device_sdi, +#ifdef CONFIG_MTD_PARTITIONS + &tct_hammer_device_nor, +#endif +}; + +static void __init tct_hammer_map_io(void) +{ + s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); +} + +static void __init tct_hammer_init(void) +{ + platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices)); +} + +MACHINE_START(TCT_HAMMER, "TCT_HAMMER") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = tct_hammer_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = tct_hammer_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 3aade7b78fe5..4c4b5c4207c4 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = { [2] = { .start = IRQ_VR1000_DM9000A, .end = IRQ_VR1000_DM9000A, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, } }; @@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = { [2] = { .start = IRQ_VR1000_DM9000N, .end = IRQ_VR1000_DM9000N, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, } }; @@ -393,7 +393,7 @@ static void __init vr1000_map_io(void) { /* initialise clock sources */ - s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.parent = &clk_upll; s3c24xx_dclk0.rate = 12*1000*1000; s3c24xx_dclk1.parent = NULL; diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index abf1599c9f97..98a0de924c22 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -175,7 +175,7 @@ void __init s3c2412_init_clocks(int xtal) /* work out clock scalings */ hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2421_CLKDIVN_ARMDIVN) ? 2 : 1); + hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); /* print brieft summary of clocks, etc */ diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 3d3dfa95db8e..47258915a2f9 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -413,10 +413,10 @@ static void __init anubis_map_io(void) { /* initialise the clocks */ - s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.parent = &clk_upll; s3c24xx_dclk0.rate = 12*1000*1000; - s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.parent = &clk_upll; s3c24xx_dclk1.rate = 24*1000*1000; s3c24xx_clkout0.parent = &s3c24xx_dclk0; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 78af7664988b..8a8acdbd072d 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -18,6 +18,7 @@ #include <linux/device.h> #include <linux/sysdev.h> #include <linux/serial_core.h> +#include <linux/clk.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -344,10 +345,10 @@ static void __init osiris_map_io(void) /* initialise the clocks */ - s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.parent = &clk_upll; s3c24xx_dclk0.rate = 12*1000*1000; - s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.parent = &clk_upll; s3c24xx_dclk1.rate = 24*1000*1000; s3c24xx_clkout0.parent = &s3c24xx_dclk0; diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 7a61e8d33ab7..8e0244631d65 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o +obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 6496eb645cee..2f772a3965c4 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -225,26 +225,28 @@ static void __init collie_init(void) int ret = 0; /* cpu initialize */ - GAFR = ( GPIO_SSP_TXD | \ - GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \ - GPIO_32_768kHz ); - - GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \ - GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \ - GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \ - GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz ); - GPLR = GPIO_GPIO18; - - // PPC pin setting - PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \ - PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \ - PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM ); - - PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 ); - - GAFR |= GPIO_32_768kHz; - GPDR |= GPIO_32_768kHz; - TUCR = TUCR_32_768kHz; + GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | + GPIO_MCP_CLK | GPIO_32_768kHz; + + GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | + GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | + GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | + COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON | + COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz; + + PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | + PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | + PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; + + PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY | + COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC; + + PGSR = COLLIE_GPIO_nREMOCON_ON; + + PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4; + + PCFR = PCFR_OPDE; + platform_scoop_config = &collie_pcmcia_config; diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 5c84c604ed86..0c2fa1c4fb4c 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -139,37 +139,6 @@ unsigned long long sched_clock(void) return v; } -int gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - - if (gpio > GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - GPDR &= ~GPIO_GPIO(gpio); - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - - if (gpio > GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - gpio_set_value(gpio, value); - GPDR |= GPIO_GPIO(gpio); - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(gpio_direction_output); - /* * Default power-off for SA1100 */ diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index f085d68e568e..793c2e6c991f 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -9,6 +9,7 @@ struct sys_timer; extern struct sys_timer sa1100_timer; extern void __init sa1100_map_io(void); extern void __init sa1100_init_irq(void); +extern void __init sa1100_init_gpio(void); #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c new file mode 100644 index 000000000000..372f1f4f54a1 --- /dev/null +++ b/arch/arm/mach-sa1100/gpio.c @@ -0,0 +1,65 @@ +/* + * linux/arch/arm/mach-sa1100/gpio.c + * + * Generic SA-1100 GPIO handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/gpio.h> +#include <asm/hardware.h> +#include "generic.h" + +static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + return GPLR & GPIO_GPIO(offset); +} + +static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + GPSR = GPIO_GPIO(offset); + else + GPCR = GPIO_GPIO(offset); +} + +static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset) +{ + unsigned long flags; + + local_irq_save(flags); + GPDR &= ~GPIO_GPIO(offset); + local_irq_restore(flags); + return 0; +} + +static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value) +{ + unsigned long flags; + + local_irq_save(flags); + sa1100_gpio_set(chip, offset, value); + GPDR |= GPIO_GPIO(offset); + local_irq_restore(flags); + return 0; +} + +static struct gpio_chip sa1100_gpio_chip = { + .label = "gpio", + .direction_input = sa1100_direction_input, + .direction_output = sa1100_direction_output, + .set = sa1100_gpio_set, + .get = sa1100_gpio_get, + .base = 0, + .ngpio = GPIO_MAX + 1, +}; + +void __init sa1100_init_gpio(void) +{ + gpiochip_add(&sa1100_gpio_chip); +} diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 3dc17d7bf38e..fa0403af7eec 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -347,4 +347,6 @@ void __init sa1100_init_irq(void) */ set_irq_chip(IRQ_GPIO11_27, &sa1100_normal_chip); set_irq_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler); + + sa1100_init_gpio(); } diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 246c573e7252..1693d447a224 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -43,20 +43,18 @@ extern void sa1100_cpu_resume(void); * More ones like CP and general purpose register values are preserved * on the stack and then the stack pointer is stored last in sleep.S. */ -enum { SLEEP_SAVE_SP = 0, - - SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR, +enum { SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR, SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR, SLEEP_SAVE_Ser1SDCR0, - SLEEP_SAVE_SIZE + SLEEP_SAVE_COUNT }; static int sa11x0_pm_enter(suspend_state_t state) { - unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE]; + unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT]; gpio = GPLR; diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index c2677368d6af..a9799cb35b74 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -13,67 +13,69 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/timex.h> -#include <linux/signal.h> -#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <asm/mach/time.h> #include <asm/hardware.h> -#define RTC_DEF_DIVIDER (32768 - 1) -#define RTC_DEF_TRIM 0 +#define MIN_OSCR_DELTA 2 -static int sa1100_set_rtc(void) +static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id) { - unsigned long current_time = xtime.tv_sec; + struct clock_event_device *c = dev_id; - if (RTSR & RTSR_ALE) { - /* make sure not to forward the clock over an alarm */ - unsigned long alarm = RTAR; - if (current_time >= alarm && alarm >= RCNR) - return -ERESTARTSYS; - } - RCNR = current_time; - return 0; -} + /* Disarm the compare/match, signal the event. */ + OIER &= ~OIER_E0; + OSSR = OSSR_M0; + c->event_handler(c); -#ifdef CONFIG_NO_IDLE_HZ -static unsigned long initial_match; -static int match_posponed; -#endif + return IRQ_HANDLED; +} -static irqreturn_t -sa1100_timer_interrupt(int irq, void *dev_id) +static int +sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) { - unsigned int next_match; + unsigned long flags, next, oscr; -#ifdef CONFIG_NO_IDLE_HZ - if (match_posponed) { - match_posponed = 0; - OSMR0 = initial_match; - } -#endif + raw_local_irq_save(flags); + OIER |= OIER_E0; + next = OSCR + delta; + OSMR0 = next; + oscr = OSCR; + raw_local_irq_restore(flags); - /* - * Loop until we get ahead of the free running timer. - * This ensures an exact clock tick count and time accuracy. - * Since IRQs are disabled at this point, coherence between - * lost_ticks(updated in do_timer()) and the match reg value is - * ensured, hence we can use do_gettimeofday() from interrupt - * handlers. - */ - do { - timer_tick(); - OSSR = OSSR_M0; /* Clear match on timer 0 */ - next_match = (OSMR0 += LATCH); - } while ((signed long)(next_match - OSCR) <= 0); + return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; +} - return IRQ_HANDLED; +static void +sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c) +{ + unsigned long flags; + + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + raw_local_irq_save(flags); + OIER &= ~OIER_E0; + OSSR = OSSR_M0; + raw_local_irq_restore(flags); + break; + + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + break; + } } -static struct irqaction sa1100_timer_irq = { - .name = "SA11xx Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = sa1100_timer_interrupt, +static struct clock_event_device ckevt_sa1100_osmr0 = { + .name = "osmr0", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 200, + .cpumask = CPU_MASK_CPU0, + .set_next_event = sa1100_osmr0_set_next_event, + .set_mode = sa1100_osmr0_set_mode, }; static cycle_t sa1100_read_oscr(void) @@ -90,62 +92,34 @@ static struct clocksource cksrc_sa1100_oscr = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static struct irqaction sa1100_timer_irq = { + .name = "ost0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = sa1100_ost0_interrupt, + .dev_id = &ckevt_sa1100_osmr0, +}; + static void __init sa1100_timer_init(void) { - unsigned long flags; - - set_rtc = sa1100_set_rtc; - OIER = 0; /* disable any timer interrupts */ OSSR = 0xf; /* clear status on all timers */ - setup_irq(IRQ_OST0, &sa1100_timer_irq); - local_irq_save(flags); - OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSMR0 = OSCR + LATCH; /* set initial match */ - local_irq_restore(flags); + + ckevt_sa1100_osmr0.mult = + div_sc(3686400, NSEC_PER_SEC, ckevt_sa1100_osmr0.shift); + ckevt_sa1100_osmr0.max_delta_ns = + clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0); + ckevt_sa1100_osmr0.min_delta_ns = + clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1; cksrc_sa1100_oscr.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift); - clocksource_register(&cksrc_sa1100_oscr); -} - -#ifdef CONFIG_NO_IDLE_HZ -static int sa1100_dyn_tick_enable_disable(void) -{ - /* nothing to do */ - return 0; -} - -static void sa1100_dyn_tick_reprogram(unsigned long ticks) -{ - if (ticks > 1) { - initial_match = OSMR0; - OSMR0 = initial_match + ticks * LATCH; - match_posponed = 1; - } -} + setup_irq(IRQ_OST0, &sa1100_timer_irq); -static irqreturn_t -sa1100_dyn_tick_handler(int irq, void *dev_id) -{ - if (match_posponed) { - match_posponed = 0; - OSMR0 = initial_match; - if ((signed long)(initial_match - OSCR) <= 0) - return sa1100_timer_interrupt(irq, dev_id); - } - return IRQ_NONE; + clocksource_register(&cksrc_sa1100_oscr); + clockevents_register_device(&ckevt_sa1100_osmr0); } -static struct dyn_tick_timer sa1100_dyn_tick = { - .enable = sa1100_dyn_tick_enable_disable, - .disable = sa1100_dyn_tick_enable_disable, - .reprogram = sa1100_dyn_tick_reprogram, - .handler = sa1100_dyn_tick_handler, -}; -#endif - #ifdef CONFIG_PM unsigned long osmr[4], oier; @@ -181,7 +155,4 @@ struct sys_timer sa1100_timer = { .init = sa1100_timer_init, .suspend = sa1100_timer_suspend, .resume = sa1100_timer_resume, -#ifdef CONFIG_NO_IDLE_HZ - .dyn_tick = &sa1100_dyn_tick, -#endif }; diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c index 9858c96560e2..9336508ec0b2 100644 --- a/arch/arm/mach-versatile/clock.c +++ b/arch/arm/mach-versatile/clock.c @@ -17,7 +17,6 @@ #include <linux/clk.h> #include <linux/mutex.h> -#include <asm/semaphore.h> #include <asm/hardware/icst307.h> #include "clock.h" diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 76348f060f27..33ed048502a3 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -18,6 +18,7 @@ config CPU_ARM610 select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU + select CPU_PABRT_NOIFAR help The ARM610 is the successor to the ARM3 processor and was produced by VLSI Technology Inc. @@ -31,6 +32,7 @@ config CPU_ARM7TDMI depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4 help A 32-bit RISC microprocessor based on the ARM7 processor core @@ -49,6 +51,7 @@ config CPU_ARM710 select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU + select CPU_PABRT_NOIFAR help A 32-bit RISC microprocessor based on the ARM7 processor core designed by Advanced RISC Machines Ltd. The ARM710 is the @@ -64,6 +67,7 @@ config CPU_ARM720T default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X select CPU_32v4T select CPU_ABRT_LV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4 select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -82,6 +86,7 @@ config CPU_ARM740T depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V3 # although the core is v4t select CPU_CP15_MPU help @@ -98,6 +103,7 @@ config CPU_ARM9TDMI depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU + select CPU_PABRT_NOIFAR select CPU_CACHE_V4 help A 32-bit RISC microprocessor based on the ARM9 processor core @@ -113,6 +119,7 @@ config CPU_ARM920T default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200 select CPU_32v4T select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -135,6 +142,7 @@ config CPU_ARM922T default y if ARCH_LH7A40X || ARCH_KS8695 select CPU_32v4T select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -155,6 +163,7 @@ config CPU_ARM925T default y if ARCH_OMAP15XX select CPU_32v4T select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -175,6 +184,7 @@ config CPU_ARM926T default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI select CPU_32v5 select CPU_ABRT_EV5TJ + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU @@ -193,6 +203,7 @@ config CPU_ARM940T depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MPU help @@ -210,6 +221,7 @@ config CPU_ARM946E depends on !MMU select CPU_32v5 select CPU_ABRT_NOMMU + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MPU help @@ -226,6 +238,7 @@ config CPU_ARM1020 depends on ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -244,6 +257,7 @@ config CPU_ARM1020E depends on ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -257,6 +271,7 @@ config CPU_ARM1022 depends on ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better @@ -275,6 +290,7 @@ config CPU_ARM1026 depends on ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10 + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better @@ -293,6 +309,7 @@ config CPU_SA110 select CPU_32v3 if ARCH_RPC select CPU_32v4 if !ARCH_RPC select CPU_ABRT_EV4 + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -314,6 +331,7 @@ config CPU_SA1100 default y select CPU_32v4 select CPU_ABRT_EV4 + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -326,6 +344,7 @@ config CPU_XSCALE default y select CPU_32v5 select CPU_ABRT_EV5T + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU @@ -337,6 +356,7 @@ config CPU_XSC3 default y select CPU_32v5 select CPU_ABRT_EV5T + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU @@ -345,13 +365,14 @@ config CPU_XSC3 # Feroceon config CPU_FEROCEON bool - depends on ARCH_ORION + depends on ARCH_ORION5X default y select CPU_32v5 select CPU_ABRT_EV5T + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU - select CPU_COPY_V4WB if MMU + select CPU_COPY_FEROCEON if MMU select CPU_TLB_V4WBI if MMU config CPU_FEROCEON_OLD_ID @@ -366,11 +387,12 @@ config CPU_FEROCEON_OLD_ID # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 default y if ARCH_MX3 default y if ARCH_MSM7X00A select CPU_32v6 select CPU_ABRT_EV6 + select CPU_PABRT_NOIFAR select CPU_CACHE_V6 select CPU_CACHE_VIPT select CPU_CP15_MMU @@ -393,10 +415,11 @@ config CPU_32v6K # ARMv7 config CPU_V7 bool "Support ARM V7 processor" - depends on ARCH_INTEGRATOR + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 + select CPU_PABRT_IFAR select CPU_CACHE_V7 select CPU_CACHE_VIPT select CPU_CP15_MMU @@ -458,6 +481,12 @@ config CPU_ABRT_EV6 config CPU_ABRT_EV7 bool +config CPU_PABRT_IFAR + bool + +config CPU_PABRT_NOIFAR + bool + # The cache model config CPU_CACHE_V3 bool @@ -494,6 +523,9 @@ config CPU_COPY_V4WT config CPU_COPY_V4WB bool +config CPU_COPY_FEROCEON + bool + config CPU_COPY_V6 bool @@ -572,6 +604,13 @@ config ARM_THUMB If you don't know what this all is, saying Y is a safe choice. +config ARM_THUMBEE + bool "Enable ThumbEE CPU extension" + depends on CPU_V7 + help + Say Y here if you have a CPU with the ThumbEE extension and code to + make use of it. Say N for code that can run on CPUs without ThumbEE. + config CPU_BIG_ENDIAN bool "Build big-endian kernel" depends on ARCH_SUPPORTS_BIG_ENDIAN @@ -622,7 +661,7 @@ config CPU_DCACHE_SIZE config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FEROCEON) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you @@ -671,5 +710,9 @@ config OUTER_CACHE default n config CACHE_L2X0 - bool + bool "Enable the L2x0 outer cache controller" + depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 + default y select OUTER_CACHE + help + This option enables the L2x0 PrimeCell. diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 44536a0b995a..32b2d2d213a6 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o +obj-$(CONFIG_CPU_COPY_FEROCEON) += copypage-feroceon.o obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o context.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o diff --git a/arch/arm/mm/copypage-feroceon.S b/arch/arm/mm/copypage-feroceon.S new file mode 100644 index 000000000000..7eb0d320d240 --- /dev/null +++ b/arch/arm/mm/copypage-feroceon.S @@ -0,0 +1,95 @@ +/* + * linux/arch/arm/lib/copypage-feroceon.S + * + * Copyright (C) 2008 Marvell Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This handles copy_user_page and clear_user_page on Feroceon + * more optimally than the generic implementations. + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/asm-offsets.h> + + .text + .align 5 + +ENTRY(feroceon_copy_user_page) + stmfd sp!, {r4-r9, lr} + mov ip, #PAGE_SZ +1: mov lr, r1 + ldmia r1!, {r2 - r9} + pld [lr, #32] + pld [lr, #64] + pld [lr, #96] + pld [lr, #128] + pld [lr, #160] + pld [lr, #192] + pld [lr, #224] + stmia r0, {r2 - r9} + ldmia r1!, {r2 - r9} + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line + add r0, r0, #32 + stmia r0, {r2 - r9} + ldmia r1!, {r2 - r9} + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line + add r0, r0, #32 + stmia r0, {r2 - r9} + ldmia r1!, {r2 - r9} + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line + add r0, r0, #32 + stmia r0, {r2 - r9} + ldmia r1!, {r2 - r9} + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line + add r0, r0, #32 + stmia r0, {r2 - r9} + ldmia r1!, {r2 - r9} + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line + add r0, r0, #32 + stmia r0, {r2 - r9} + ldmia r1!, {r2 - r9} + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line + add r0, r0, #32 + stmia r0, {r2 - r9} + ldmia r1!, {r2 - r9} + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line + add r0, r0, #32 + stmia r0, {r2 - r9} + subs ip, ip, #(32 * 8) + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line + add r0, r0, #32 + bne 1b + mcr p15, 0, ip, c7, c10, 4 @ drain WB + ldmfd sp!, {r4-r9, pc} + + .align 5 + +ENTRY(feroceon_clear_user_page) + stmfd sp!, {r4-r7, lr} + mov r1, #PAGE_SZ/32 + mov r2, #0 + mov r3, #0 + mov r4, #0 + mov r5, #0 + mov r6, #0 + mov r7, #0 + mov ip, #0 + mov lr, #0 +1: stmia r0, {r2-r7, ip, lr} + subs r1, r1, #1 + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line + add r0, r0, #32 + bne 1b + mcr p15, 0, r1, c7, c10, 4 @ drain WB + ldmfd sp!, {r4-r7, pc} + + __INITDATA + + .type feroceon_user_fns, #object +ENTRY(feroceon_user_fns) + .long feroceon_clear_user_page + .long feroceon_copy_user_page + .size feroceon_user_fns, . - feroceon_user_fns diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index ec00f26bffa4..b657f1719af0 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -48,8 +48,6 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_online_node(node) { pg_data_t *n = NODE_DATA(node); struct page *map = n->node_mem_map - n->node_start_pfn; diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c index 62066f3020c8..7429f8c01015 100644 --- a/arch/arm/mm/iomap.c +++ b/arch/arm/mm/iomap.c @@ -26,8 +26,8 @@ EXPORT_SYMBOL(ioport_unmap); #ifdef CONFIG_PCI void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) { - unsigned long start = pci_resource_start(dev, bar); - unsigned long len = pci_resource_len(dev, bar); + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); unsigned long flags = pci_resource_flags(dev, bar); if (!len || !start) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index d41a75ed3dce..2d6d682c206a 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -35,6 +35,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; * zero-initialized data and COW. */ struct page *empty_zero_page; +EXPORT_SYMBOL(empty_zero_page); /* * The pmd table for the upper-most set of pages. diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 700c04d6996e..5673f4d6113b 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -471,6 +471,7 @@ arm1020_crval: .type arm1020_processor_functions, #object arm1020_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm1020_proc_init .word cpu_arm1020_proc_fin .word cpu_arm1020_reset diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 1cc206ab5eae..4343fdb0e9e5 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -452,6 +452,7 @@ arm1020e_crval: .type arm1020e_processor_functions, #object arm1020e_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm1020e_proc_init .word cpu_arm1020e_proc_fin .word cpu_arm1020e_reset diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index aff0ea08e2f8..2a4ea1659e96 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -435,6 +435,7 @@ arm1022_crval: .type arm1022_processor_functions, #object arm1022_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm1022_proc_init .word cpu_arm1022_proc_fin .word cpu_arm1022_reset diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 65e43a109085..77a1babd421c 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -430,6 +430,7 @@ arm1026_crval: .type arm1026_processor_functions, #object arm1026_processor_functions: .word v5t_early_abort + .word pabort_noifar .word cpu_arm1026_proc_init .word cpu_arm1026_proc_fin .word cpu_arm1026_reset diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 123a7dc7a433..c371fc87776e 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -293,6 +293,7 @@ __arm7_setup: mov r0, #0 .type arm6_processor_functions, #object ENTRY(arm6_processor_functions) .word cpu_arm6_data_abort + .word pabort_noifar .word cpu_arm6_proc_init .word cpu_arm6_proc_fin .word cpu_arm6_reset @@ -309,6 +310,7 @@ ENTRY(arm6_processor_functions) .type arm7_processor_functions, #object ENTRY(arm7_processor_functions) .word cpu_arm7_data_abort + .word pabort_noifar .word cpu_arm7_proc_init .word cpu_arm7_proc_fin .word cpu_arm7_reset diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index dc763be43362..d64f8e6f75ab 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -198,6 +198,7 @@ arm720_crval: .type arm720_processor_functions, #object ENTRY(arm720_processor_functions) .word v4t_late_abort + .word pabort_noifar .word cpu_arm720_proc_init .word cpu_arm720_proc_fin .word cpu_arm720_reset diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 7069f495cf9b..3a57376c8bc9 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -126,6 +126,7 @@ __arm740_setup: .type arm740_processor_functions, #object ENTRY(arm740_processor_functions) .word v4t_late_abort + .word pabort_noifar .word cpu_arm740_proc_init .word cpu_arm740_proc_fin .word cpu_arm740_reset diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index d091c2571823..7b3ecdeb5370 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -64,6 +64,7 @@ __arm7tdmi_setup: .type arm7tdmi_processor_functions, #object ENTRY(arm7tdmi_processor_functions) .word v4t_late_abort + .word pabort_noifar .word cpu_arm7tdmi_proc_init .word cpu_arm7tdmi_proc_fin .word cpu_arm7tdmi_reset diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 75c945ed6c4d..28cdb060df45 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -417,6 +417,7 @@ arm920_crval: .type arm920_processor_functions, #object arm920_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm920_proc_init .word cpu_arm920_proc_fin .word cpu_arm920_reset diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index ffb751b877ff..94ddcb4a4b76 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -421,6 +421,7 @@ arm922_crval: .type arm922_processor_functions, #object arm922_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm922_proc_init .word cpu_arm922_proc_fin .word cpu_arm922_reset diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 44c2c997819f..d045812f3399 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -332,7 +332,7 @@ ENTRY(arm925_dma_flush_range) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry #else - mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry #endif add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -484,6 +484,7 @@ arm925_crval: .type arm925_processor_functions, #object arm925_processor_functions: .word v4t_early_abort + .word pabort_noifar .word cpu_arm925_proc_init .word cpu_arm925_proc_fin .word cpu_arm925_reset diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 194ef48968e6..4cd33169a7c9 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -295,7 +295,7 @@ ENTRY(arm926_dma_flush_range) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry #else - mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry #endif add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -437,6 +437,7 @@ arm926_crval: .type arm926_processor_functions, #object arm926_processor_functions: .word v5tj_early_abort + .word pabort_noifar .word cpu_arm926_proc_init .word cpu_arm926_proc_fin .word cpu_arm926_reset diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 786c593778f0..1a3d63df8e90 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -222,7 +222,7 @@ ENTRY(arm940_dma_flush_range) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry #else - mcr p15, 0, r3, c7, c10, 2 @ clean D entry + mcr p15, 0, r3, c7, c6, 2 @ invalidate D entry #endif subs r3, r3, #1 << 26 bcs 2b @ entries 63 to 0 @@ -321,6 +321,7 @@ __arm940_setup: .type arm940_processor_functions, #object ENTRY(arm940_processor_functions) .word nommu_early_abort + .word pabort_noifar .word cpu_arm940_proc_init .word cpu_arm940_proc_fin .word cpu_arm940_reset diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index a60c1421d450..82d579ac9b98 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -265,7 +265,7 @@ ENTRY(arm946_dma_flush_range) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry #else - mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry #endif add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -376,6 +376,7 @@ __arm946_setup: .type arm946_processor_functions, #object ENTRY(arm946_processor_functions) .word nommu_early_abort + .word pabort_noifar .word cpu_arm946_proc_init .word cpu_arm946_proc_fin .word cpu_arm946_reset diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 4848eeac86b6..c85c1f50e396 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -64,6 +64,7 @@ __arm9tdmi_setup: .type arm9tdmi_processor_functions, #object ENTRY(arm9tdmi_processor_functions) .word nommu_early_abort + .word pabort_noifar .word cpu_arm9tdmi_proc_init .word cpu_arm9tdmi_proc_fin .word cpu_arm9tdmi_reset diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index fa0dc7e6f0ea..a02c1712b52d 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -93,7 +93,7 @@ ENTRY(cpu_feroceon_reset) * * Called with IRQs disabled */ - .align 10 + .align 5 ENTRY(cpu_feroceon_do_idle) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer @@ -106,6 +106,7 @@ ENTRY(cpu_feroceon_do_idle) * Clean and invalidate all cache entries in a particular * address space. */ + .align 5 ENTRY(feroceon_flush_user_cache_all) /* FALLTHROUGH */ @@ -118,12 +119,8 @@ ENTRY(feroceon_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache -#else 1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate bne 1b -#endif tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB @@ -139,27 +136,19 @@ __flush_whole_cache: * - end - end address (exclusive) * - flags - vm_flags describing address space */ + .align 5 ENTRY(feroceon_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT bgt __flush_whole_cache 1: tst r2, #VM_EXEC -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry - mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry - add r0, r0, #CACHE_DLINESIZE - mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry - mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry - add r0, r0, #CACHE_DLINESIZE -#else mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry add r0, r0, #CACHE_DLINESIZE mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry add r0, r0, #CACHE_DLINESIZE -#endif cmp r0, r1 blo 1b tst r2, #VM_EXEC @@ -176,6 +165,7 @@ ENTRY(feroceon_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ + .align 5 ENTRY(feroceon_coherent_kern_range) /* FALLTHROUGH */ @@ -207,6 +197,7 @@ ENTRY(feroceon_coherent_user_range) * * - addr - page aligned address */ + .align 5 ENTRY(feroceon_flush_kern_dcache_page) add r1, r0, #PAGE_SZ 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry @@ -231,13 +222,12 @@ ENTRY(feroceon_flush_kern_dcache_page) * * (same as v4wb) */ + .align 5 ENTRY(feroceon_dma_inv_range) -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH tst r0, #CACHE_DLINESIZE - 1 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry tst r1, #CACHE_DLINESIZE - 1 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry -#endif bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -256,14 +246,13 @@ ENTRY(feroceon_dma_inv_range) * * (same as v4wb) */ + .align 5 ENTRY(feroceon_dma_clean_range) -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b -#endif mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr @@ -275,14 +264,10 @@ ENTRY(feroceon_dma_clean_range) * - start - virtual start address * - end - virtual end address */ + .align 5 ENTRY(feroceon_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 -1: -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry -#else - mcr p15, 0, r0, c7, c10, 1 @ clean D entry -#endif +1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b @@ -300,13 +285,12 @@ ENTRY(feroceon_cache_fns) .long feroceon_dma_clean_range .long feroceon_dma_flush_range + .align 5 ENTRY(cpu_feroceon_dcache_clean_area) -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE subs r1, r1, #CACHE_DLINESIZE bhi 1b -#endif mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr @@ -323,13 +307,9 @@ ENTRY(cpu_feroceon_dcache_clean_area) ENTRY(cpu_feroceon_switch_mm) #ifdef CONFIG_MMU mov ip, #0 -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache -#else @ && 'Clean & Invalidate whole DCache' 1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate bne 1b -#endif mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache mcr p15, 0, ip, c7, c10, 4 @ drain WB mcr p15, 0, r0, c2, c0, 0 @ load page table pointer @@ -362,16 +342,9 @@ ENTRY(cpu_feroceon_set_pte_ext) tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? movne r2, #0 -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - eor r3, r2, #0x0a @ C & small page? - tst r3, #0x0b - biceq r2, r2, #4 -#endif str r2, [r0] @ hardware version mov r0, r0 -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, r0, c7, c10, 1 @ clean D entry -#endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif mov pc, lr @@ -387,20 +360,11 @@ __feroceon_setup: mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 #endif - -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mov r0, #4 @ disable write-back on caches explicitly - mcr p15, 7, r0, c15, c0, 0 -#endif - adr r5, feroceon_crval ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 -#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN - orr r0, r0, #0x4000 @ .1.. .... .... .... -#endif mov pc, lr .size __feroceon_setup, . - __feroceon_setup @@ -423,6 +387,7 @@ feroceon_crval: .type feroceon_processor_functions, #object feroceon_processor_functions: .word v5t_early_abort + .word pabort_noifar .word cpu_feroceon_proc_init .word cpu_feroceon_proc_fin .word cpu_feroceon_reset @@ -475,7 +440,7 @@ __feroceon_old_id_proc_info: .long cpu_feroceon_name .long feroceon_processor_functions .long v4wbi_tlb_fns - .long v4wb_user_fns + .long feroceon_user_fns .long feroceon_cache_fns .size __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info #endif @@ -501,6 +466,6 @@ __feroceon_proc_info: .long cpu_feroceon_name .long feroceon_processor_functions .long v4wbi_tlb_fns - .long v4wb_user_fns + .long feroceon_user_fns .long feroceon_cache_fns .size __feroceon_proc_info, . - __feroceon_proc_info diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 6e226e12989f..9818195dbf11 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -216,6 +216,7 @@ sa110_crval: .type sa110_processor_functions, #object ENTRY(sa110_processor_functions) .word v4_early_abort + .word pabort_noifar .word cpu_sa110_proc_init .word cpu_sa110_proc_fin .word cpu_sa110_reset diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 9afb11d089fe..c5fe27ad2892 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -231,6 +231,7 @@ sa1100_crval: .type sa1100_processor_functions, #object ENTRY(sa1100_processor_functions) .word v4_early_abort + .word pabort_noifar .word cpu_sa1100_proc_init .word cpu_sa1100_proc_fin .word cpu_sa1100_reset diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index eb42e5b94863..5702ec58b2a2 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -17,10 +17,6 @@ #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#ifdef CONFIG_SMP -#include <asm/hardware/arm_scu.h> -#endif - #include "proc-macros.S" #define D_CACHE_LINE_SIZE 32 @@ -187,20 +183,10 @@ cpu_v6_name: */ __v6_setup: #ifdef CONFIG_SMP - /* Set up the SCU on core 0 only */ - mrc p15, 0, r0, c0, c0, 5 @ CPU core number - ands r0, r0, #15 - ldreq r0, =SCU_BASE - ldreq r5, [r0, #SCU_CTRL] - orreq r5, r5, #1 - streq r5, [r0, #SCU_CTRL] - -#ifndef CONFIG_CPU_DCACHE_DISABLE mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode orr r0, r0, #0x20 mcr p15, 0, r0, c1, c0, 1 #endif -#endif mov r0, #0 mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache @@ -233,6 +219,7 @@ v6_crval: .type v6_processor_functions, #object ENTRY(v6_processor_functions) .word v6_early_abort + .word pabort_noifar .word cpu_v6_proc_init .word cpu_v6_proc_fin .word cpu_v6_reset diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index e0acc5ae6f6f..b49f9a4c82c8 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -205,6 +205,7 @@ __v7_setup_stack: .type v7_processor_functions, #object ENTRY(v7_processor_functions) .word v7_early_abort + .word pabort_ifar .word cpu_v7_proc_init .word cpu_v7_proc_fin .word cpu_v7_reset diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index d95921a2ab99..3533741a76f6 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -450,6 +450,7 @@ xsc3_crval: .type xsc3_processor_functions, #object ENTRY(xsc3_processor_functions) .word v5t_early_abort + .word pabort_noifar .word cpu_xsc3_proc_init .word cpu_xsc3_proc_fin .word cpu_xsc3_reset diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 016690b9d564..2dd85273976f 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -527,6 +527,7 @@ xscale_crval: .type xscale_processor_functions, #object ENTRY(xscale_processor_functions) .word v5t_early_abort + .word pabort_noifar .word cpu_xscale_proc_init .word cpu_xscale_proc_fin .word cpu_xscale_reset diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c index 75bae067922d..74fae6045650 100644 --- a/arch/arm/oprofile/op_model_mpcore.c +++ b/arch/arm/oprofile/op_model_mpcore.c @@ -51,7 +51,7 @@ /* * MPCore SCU event monitor support */ -#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_MPCORE_SCU_BASE + 0x10) +#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_EB11MP_SCU_BASE + 0x10) /* * Bitmask of used SCU counters @@ -80,7 +80,7 @@ static irqreturn_t scu_em_interrupt(int irq, void *arg) struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE; unsigned int cnt; - cnt = irq - IRQ_PMU_SCU0; + cnt = irq - IRQ_EB11MP_PMU_SCU0; oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt)); scu_reset_counter(emc, cnt); @@ -119,10 +119,10 @@ static int scu_start(void) */ for (i = 0; i < NUM_SCU_COUNTERS; i++) { if (scu_em_used & (1 << i)) { - ret = request_irq(IRQ_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL); + ret = request_irq(IRQ_EB11MP_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL); if (ret) { printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n", - IRQ_PMU_SCU0 + i); + IRQ_EB11MP_PMU_SCU0 + i); goto err_free_scu; } } @@ -153,7 +153,7 @@ static int scu_start(void) err_free_scu: while (i--) - free_irq(IRQ_PMU_SCU0 + i, NULL); + free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL); return ret; } @@ -175,7 +175,7 @@ static void scu_stop(void) for (i = 0; i < NUM_SCU_COUNTERS; i++) { if (scu_em_used & (1 << i)) { scu_reset_counter(emc, i); - free_irq(IRQ_PMU_SCU0 + i, NULL); + free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL); } } } @@ -225,10 +225,10 @@ static int em_setup_ctrs(void) } static int arm11_irqs[] = { - [0] = IRQ_PMU_CPU0, - [1] = IRQ_PMU_CPU1, - [2] = IRQ_PMU_CPU2, - [3] = IRQ_PMU_CPU3 + [0] = IRQ_EB11MP_PMU_CPU0, + [1] = IRQ_EB11MP_PMU_CPU1, + [2] = IRQ_EB11MP_PMU_CPU2, + [3] = IRQ_EB11MP_PMU_CPU3 }; static int em_start(void) @@ -273,22 +273,22 @@ static int em_setup(void) /* * Send SCU PMU interrupts to the "owner" CPU. */ - em_route_irq(IRQ_PMU_SCU0, 0); - em_route_irq(IRQ_PMU_SCU1, 0); - em_route_irq(IRQ_PMU_SCU2, 1); - em_route_irq(IRQ_PMU_SCU3, 1); - em_route_irq(IRQ_PMU_SCU4, 2); - em_route_irq(IRQ_PMU_SCU5, 2); - em_route_irq(IRQ_PMU_SCU6, 3); - em_route_irq(IRQ_PMU_SCU7, 3); + em_route_irq(IRQ_EB11MP_PMU_SCU0, 0); + em_route_irq(IRQ_EB11MP_PMU_SCU1, 0); + em_route_irq(IRQ_EB11MP_PMU_SCU2, 1); + em_route_irq(IRQ_EB11MP_PMU_SCU3, 1); + em_route_irq(IRQ_EB11MP_PMU_SCU4, 2); + em_route_irq(IRQ_EB11MP_PMU_SCU5, 2); + em_route_irq(IRQ_EB11MP_PMU_SCU6, 3); + em_route_irq(IRQ_EB11MP_PMU_SCU7, 3); /* * Send CP15 PMU interrupts to the owner CPU. */ - em_route_irq(IRQ_PMU_CPU0, 0); - em_route_irq(IRQ_PMU_CPU1, 1); - em_route_irq(IRQ_PMU_CPU2, 2); - em_route_irq(IRQ_PMU_CPU3, 3); + em_route_irq(IRQ_EB11MP_PMU_CPU0, 0); + em_route_irq(IRQ_EB11MP_PMU_CPU1, 1); + em_route_irq(IRQ_EB11MP_PMU_CPU2, 2); + em_route_irq(IRQ_EB11MP_PMU_CPU3, 3); return 0; } diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 98d01517b563..d9bc15a69e5d 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -24,6 +24,7 @@ #include <asm/hardware.h> #include <asm/mach/pci.h> #include <asm/hardware/iop3xx.h> +#include <asm/mach-types.h> // #define DEBUG @@ -209,8 +210,11 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) res[1].flags = IORESOURCE_MEM; request_resource(&iomem_resource, &res[1]); - sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA; - sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - IOP3XX_PCI_LOWER_IO_BA; + /* + * Use whatever translation is already setup. + */ + sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0; + sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR; sys->resource[0] = &res[0]; sys->resource[1] = &res[1]; @@ -250,11 +254,11 @@ void __init iop3xx_atu_setup(void) *IOP3XX_IATVR2 = PHYS_OFFSET; /* Outbound window 0 */ - *IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_PA; + *IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA; *IOP3XX_OUMWTVR0 = 0; /* Outbound window 1 */ - *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE; + *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE; *IOP3XX_OUMWTVR1 = 0; /* BAR 3 ( Disabled ) */ @@ -265,7 +269,7 @@ void __init iop3xx_atu_setup(void) /* Setup the I/O Bar */ - *IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_PA;; + *IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA; /* Enable inbound and outbound cycles */ @@ -322,34 +326,59 @@ void __init iop3xx_atu_disable(void) /* Flag to determine whether the ATU is initialized and the PCI bus scanned */ int init_atu; -void __init iop3xx_pci_preinit(void) +int iop3xx_get_init_atu(void) { + /* check if default has been overridden */ + if (init_atu != IOP3XX_INIT_ATU_DEFAULT) + return init_atu; + else + return IOP3XX_INIT_ATU_DISABLE; +} + +static void __init iop3xx_atu_debug(void) { - if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) { - iop3xx_atu_disable(); - iop3xx_atu_setup(); - } + DBG("PCI: Intel IOP3xx PCI init.\n"); + DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n", + *IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0); + DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n", + *IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1); + DBG("PCI: Outbound IO window: PCI 0x%08x\n", + *IOP3XX_OIOWTVR); + + DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", + *IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0); + DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n", + *IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1); + DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", + *IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2); + DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", + *IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3); + + DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", + 0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR); - DBG("PCI: Intel 803xx PCI init code.\n"); DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD); - DBG("ATU: IOP3XX_OMWTVR0=0x%04x, IOP3XX_OIOWTVR=0x%04x\n", - *IOP3XX_OMWTVR0, - *IOP3XX_OIOWTVR); DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR); - DBG("ATU: IOP3XX_IABAR0=0x%08x IOP3XX_IALR0=0x%08x IOP3XX_IATVR0=%08x\n", - *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0); - DBG("ATU: IOP3XX_OMWTVR0=0x%08x\n", *IOP3XX_OMWTVR0); - DBG("ATU: IOP3XX_IABAR1=0x%08x IOP3XX_IALR1=0x%08x\n", - *IOP3XX_IABAR1, *IOP3XX_IALR1); - DBG("ATU: IOP3XX_ERBAR=0x%08x IOP3XX_ERLR=0x%08x IOP3XX_ERTVR=%08x\n", - *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR); - DBG("ATU: IOP3XX_IABAR2=0x%08x IOP3XX_IALR2=0x%08x IOP3XX_IATVR2=%08x\n", - *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2); - DBG("ATU: IOP3XX_IABAR3=0x%08x IOP3XX_IALR3=0x%08x IOP3XX_IATVR3=%08x\n", - *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3); hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort"); } +/* for platforms that might be host-bus-adapters */ +void __init iop3xx_pci_preinit_cond(void) +{ + if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) { + iop3xx_atu_disable(); + iop3xx_atu_setup(); + iop3xx_atu_debug(); + } +} + +void __init iop3xx_pci_preinit(void) +{ + iop3xx_atu_disable(); + iop3xx_atu_setup(); + iop3xx_atu_debug(); +} + /* allow init_atu to be user overridden */ static int __init iop3xx_init_atu_setup(char *str) { diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 03a65c0dfb60..bb6e12738fb3 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -4,7 +4,7 @@ menu "Freescale MXC Implementations" choice prompt "MXC/iMX System Type" - default 0 + default ARCH_MX3 config ARCH_MX3 bool "MX3-based" diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 66ad9c2b6d64..f96dc0362068 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -4,7 +4,3 @@ # Common support obj-y := irq.o - -obj-m := -obj-n := -obj- := diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 87d253bc3d3c..2ad5a6917b3f 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -19,21 +19,13 @@ #include <asm/mach/irq.h> #include <asm/arch/common.h> -/*! - * Disable interrupt number "irq" in the AVIC - * - * @param irq interrupt source number - */ +/* Disable interrupt number "irq" in the AVIC */ static void mxc_mask_irq(unsigned int irq) { __raw_writel(irq, AVIC_INTDISNUM); } -/*! - * Enable interrupt number "irq" in the AVIC - * - * @param irq interrupt source number - */ +/* Enable interrupt number "irq" in the AVIC */ static void mxc_unmask_irq(unsigned int irq) { __raw_writel(irq, AVIC_INTENNUM); @@ -45,7 +37,7 @@ static struct irq_chip mxc_avic_chip = { .unmask = mxc_unmask_irq, }; -/*! +/* * This function initializes the AVIC hardware and disables all the * interrupts. It registers the interrupt enable and disable functions * to the kernel for each interrupt source. diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 8f56c255d1ee..bc639a30d6d1 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -9,8 +9,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o - # OCPI interconnect support for 1710, 1610 and 5912 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 0a603242f367..2db5580048d8 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -21,9 +21,9 @@ #include <linux/clk.h> #include <linux/mutex.h> #include <linux/platform_device.h> +#include <linux/cpufreq.h> #include <asm/io.h> -#include <asm/semaphore.h> #include <asm/arch/clock.h> @@ -135,9 +135,17 @@ void clk_disable(struct clk *clk) return; spin_lock_irqsave(&clockfw_lock, flags); - BUG_ON(clk->usecount == 0); + if (clk->usecount == 0) { + printk(KERN_ERR "Trying disable clock %s with 0 usecount\n", + clk->name); + WARN_ON(1); + goto out; + } + if (arch_clock->clk_disable) arch_clock->clk_disable(clk); + +out: spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -304,6 +312,23 @@ void propagate_rate(struct clk * tclk) } } +/** + * recalculate_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + * Called at init. + */ +void recalculate_root_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) { + if (unlikely(!clkp->parent) && likely((u32)clkp->recalc)) + clkp->recalc(clkp); + } +} + int clk_register(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) @@ -358,6 +383,30 @@ void clk_allow_idle(struct clk *clk) } EXPORT_SYMBOL(clk_allow_idle); +void clk_enable_init_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) { + if (clkp->flags & ENABLE_ON_INIT) + clk_enable(clkp); + } +} +EXPORT_SYMBOL(clk_enable_init_clocks); + +#ifdef CONFIG_CPU_FREQ +void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) +{ + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_init_cpufreq_table) + arch_clock->clk_init_cpufreq_table(table); + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_init_cpufreq_table); +#endif + /*-------------------------------------------------------------------------*/ #ifdef CONFIG_OMAP_RESET_CLOCKS @@ -396,3 +445,4 @@ int __init clk_init(struct clk_functions * custom_clocks) return 0; } + diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 4f0f9c4e938e..bd1cef2c3c14 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -27,11 +27,16 @@ #include <asm/setup.h> #include <asm/arch/board.h> +#include <asm/arch/control.h> #include <asm/arch/mux.h> #include <asm/arch/fpga.h> #include <asm/arch/clock.h> +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +# include "../mach-omap2/sdrc.h" +#endif + #define NO_LENGTH_CHECK 0xffffffff unsigned char omap_bootloader_tag[512]; @@ -171,8 +176,8 @@ console_initcall(omap_add_serial_console); #if defined(CONFIG_ARCH_OMAP16XX) #define TIMER_32K_SYNCHRONIZED 0xfffbc410 -#elif defined(CONFIG_ARCH_OMAP24XX) -#define TIMER_32K_SYNCHRONIZED (OMAP24XX_32KSYNCT_BASE + 0x10) +#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#define TIMER_32K_SYNCHRONIZED (OMAP2_32KSYNCT_BASE + 0x10) #endif #ifdef TIMER_32K_SYNCHRONIZED @@ -193,12 +198,35 @@ static struct clocksource clocksource_32k = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +/* + * Rounds down to nearest nsec. + */ +unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k) +{ + return cyc2ns(&clocksource_32k, ticks_32k); +} + +/* + * Returns current time from boot in nsecs. It's OK for this to wrap + * around for now, as it's just a relative time stamp. + */ +unsigned long long sched_clock(void) +{ + return omap_32k_ticks_to_nsecs(omap_32k_read()); +} + static int __init omap_init_clocksource_32k(void) { static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; - if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + if (cpu_is_omap16xx() || cpu_class_is_omap2()) { + struct clk *sync_32k_ick; + + sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); + if (sync_32k_ick) + clk_enable(sync_32k_ick); + clocksource_32k.mult = clocksource_hz2mult(32768, clocksource_32k.shift); @@ -210,3 +238,33 @@ static int __init omap_init_clocksource_32k(void) arch_initcall(omap_init_clocksource_32k); #endif /* TIMER_32K_SYNCHRONIZED */ + +/* Global address base setup code */ + +#if defined(CONFIG_ARCH_OMAP2420) +void __init omap2_set_globals_242x(void) +{ + omap2_sdrc_base = OMAP2420_SDRC_BASE; + omap2_sms_base = OMAP2420_SMS_BASE; + omap_ctrl_base_set(OMAP2420_CTRL_BASE); +} +#endif + +#if defined(CONFIG_ARCH_OMAP2430) +void __init omap2_set_globals_243x(void) +{ + omap2_sdrc_base = OMAP243X_SDRC_BASE; + omap2_sms_base = OMAP243X_SMS_BASE; + omap_ctrl_base_set(OMAP243X_CTRL_BASE); +} +#endif + +#if defined(CONFIG_ARCH_OMAP3430) +void __init omap2_set_globals_343x(void) +{ + omap2_sdrc_base = OMAP343X_SDRC_BASE; + omap2_sms_base = OMAP343X_SMS_BASE; + omap_ctrl_base_set(OMAP343X_CTRL_BASE); +} +#endif + diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 793740686be2..c00eda588cd8 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -604,6 +604,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->data = data; #ifndef CONFIG_ARCH_OMAP1 chan->chain_id = -1; + chan->next_linked_ch = -1; #endif chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; @@ -1087,7 +1088,6 @@ int omap_request_dma_chain(int dev_id, const char *dev_name, printk(KERN_ERR "omap_dma: Request failed %d\n", err); return err; } - dma_chan[channels[i]].next_linked_ch = -1; dma_chan[channels[i]].prev_linked_ch = -1; dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 8c78e4e57b5c..1903a3491ee9 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -136,7 +136,6 @@ struct gpio_bank { u16 irq; u16 virtual_irq_start; int method; - u32 reserved_map; #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) u32 suspend_wakeup; u32 saved_wakeup; @@ -149,7 +148,9 @@ struct gpio_bank { u32 saved_fallingdetect; u32 saved_risingdetect; #endif + u32 level_mask; spinlock_t lock; + struct gpio_chip chip; }; #define METHOD_MPUIO 0 @@ -538,10 +539,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, bank->enabled_non_wakeup_gpios &= ~gpio_bit; } - /* - * FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only - * level triggering requested. - */ + bank->level_mask = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); } #endif @@ -652,6 +652,12 @@ static int gpio_irq_type(unsigned irq, unsigned type) irq_desc[irq].status |= type; } spin_unlock_irqrestore(&bank->lock, flags); + + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) + __set_irq_handler_unlocked(irq, handle_level_irq); + else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + __set_irq_handler_unlocked(irq, handle_edge_irq); + return retval; } @@ -903,19 +909,17 @@ int omap_request_gpio(int gpio) { struct gpio_bank *bank; unsigned long flags; + int status; if (check_gpio(gpio) < 0) return -EINVAL; + status = gpio_request(gpio, NULL); + if (status < 0) + return status; + bank = get_gpio_bank(gpio); spin_lock_irqsave(&bank->lock, flags); - if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) { - printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio); - dump_stack(); - spin_unlock_irqrestore(&bank->lock, flags); - return -1; - } - bank->reserved_map |= (1 << get_gpio_index(gpio)); /* Set trigger to none. You need to enable the desired trigger with * request_irq() or set_irq_type(). @@ -945,10 +949,11 @@ void omap_free_gpio(int gpio) return; bank = get_gpio_bank(gpio); spin_lock_irqsave(&bank->lock, flags); - if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) { + if (unlikely(!gpiochip_is_requested(&bank->chip, + get_gpio_index(gpio)))) { + spin_unlock_irqrestore(&bank->lock, flags); printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio); dump_stack(); - spin_unlock_irqrestore(&bank->lock, flags); return; } #ifdef CONFIG_ARCH_OMAP16XX @@ -965,9 +970,9 @@ void omap_free_gpio(int gpio) __raw_writel(1 << get_gpio_index(gpio), reg); } #endif - bank->reserved_map &= ~(1 << get_gpio_index(gpio)); _reset_gpio(bank, gpio); spin_unlock_irqrestore(&bank->lock, flags); + gpio_free(gpio); } /* @@ -1022,12 +1027,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) isr &= 0x0000ffff; if (cpu_class_is_omap2()) { - level_mask = - __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - level_mask &= enabled; + level_mask = bank->level_mask & enabled; } /* clear edge sensitive interrupts before handler(s) are @@ -1052,51 +1052,13 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) gpio_irq = bank->virtual_irq_start; for (; isr != 0; isr >>= 1, gpio_irq++) { struct irq_desc *d; - int irq_mask; + if (!(isr & 1)) continue; d = irq_desc + gpio_irq; - /* Don't run the handler if it's already running - * or was disabled lazely. - */ - if (unlikely((d->depth || - (d->status & IRQ_INPROGRESS)))) { - irq_mask = 1 << - (gpio_irq - bank->virtual_irq_start); - /* The unmasking will be done by - * enable_irq in case it is disabled or - * after returning from the handler if - * it's already running. - */ - _enable_gpio_irqbank(bank, irq_mask, 0); - if (!d->depth) { - /* Level triggered interrupts - * won't ever be reentered - */ - BUG_ON(level_mask & irq_mask); - d->status |= IRQ_PENDING; - } - continue; - } desc_handle_irq(gpio_irq, d); - - if (unlikely((d->status & IRQ_PENDING) && !d->depth)) { - irq_mask = 1 << - (gpio_irq - bank->virtual_irq_start); - d->status &= ~IRQ_PENDING; - _enable_gpio_irqbank(bank, irq_mask, 1); - retrigger |= irq_mask; - } } - - if (cpu_class_is_omap2()) { - /* clear level sensitive interrupts after handler(s) */ - _enable_gpio_irqbank(bank, isr_saved & level_mask, 0); - _clear_gpio_irqbank(bank, isr_saved & level_mask); - _enable_gpio_irqbank(bank, isr_saved & level_mask, 1); - } - } /* if bank has any level sensitive GPIO pin interrupt configured, we must unmask the bank interrupt only after @@ -1135,6 +1097,14 @@ static void gpio_unmask_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); + unsigned int irq_mask = 1 << get_gpio_index(gpio); + + /* For level-triggered GPIOs, the clearing must be done after + * the HW source is cleared, thus after the handler has run */ + if (bank->level_mask & irq_mask) { + _set_gpio_irqenable(bank, gpio, 0); + _clear_gpio_irqstatus(bank, gpio); + } _set_gpio_irqenable(bank, gpio, 1); } @@ -1266,6 +1236,53 @@ static inline void mpuio_init(void) {} /*---------------------------------------------------------------------*/ +/* REVISIT these are stupid implementations! replace by ones that + * don't switch on METHOD_* and which mostly avoid spinlocks + */ + +static int gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_direction(bank, offset, 1); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +} + +static int gpio_get(struct gpio_chip *chip, unsigned offset) +{ + return omap_get_gpio_datain(chip->base + offset); +} + +static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_dataout(bank, offset, value); + _set_gpio_direction(bank, offset, 0); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +} + +static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_dataout(bank, offset, value); + spin_unlock_irqrestore(&bank->lock, flags); +} + +/*---------------------------------------------------------------------*/ + static int initialized; #if !defined(CONFIG_ARCH_OMAP3) static struct clk * gpio_ick; @@ -1293,6 +1310,7 @@ static struct lock_class_key gpio_lock_class; static int __init _omap_gpio_init(void) { int i; + int gpio = 0; struct gpio_bank *bank; #if defined(CONFIG_ARCH_OMAP3) char clk_name[11]; @@ -1423,7 +1441,6 @@ static int __init _omap_gpio_init(void) int j, gpio_count = 16; bank = &gpio_bank[i]; - bank->reserved_map = 0; bank->base = IO_ADDRESS(bank->base); spin_lock_init(&bank->lock); if (bank_is_mpuio(bank)) @@ -1461,6 +1478,26 @@ static int __init _omap_gpio_init(void) gpio_count = 32; } #endif + + /* REVISIT eventually switch from OMAP-specific gpio structs + * over to the generic ones + */ + bank->chip.direction_input = gpio_input; + bank->chip.get = gpio_get; + bank->chip.direction_output = gpio_output; + bank->chip.set = gpio_set; + if (bank_is_mpuio(bank)) { + bank->chip.label = "mpuio"; + bank->chip.base = OMAP_MPUIO(0); + } else { + bank->chip.label = "gpio"; + bank->chip.base = gpio; + gpio += gpio_count; + } + bank->chip.ngpio = gpio_count; + + gpiochip_add(&bank->chip); + for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + gpio_count; j++) { lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); @@ -1757,8 +1794,10 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { unsigned irq, value, is_in, irqstat; + const char *label; - if (!(bank->reserved_map & mask)) + label = gpiochip_is_requested(&bank->chip, j); + if (!label) continue; irq = bank->virtual_irq_start + j; @@ -1766,13 +1805,16 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) is_in = gpio_is_input(bank, mask); if (bank_is_mpuio(bank)) - seq_printf(s, "MPUIO %2d: ", j); + seq_printf(s, "MPUIO %2d ", j); else - seq_printf(s, "GPIO %3d: ", gpio); - seq_printf(s, "%s %s", + seq_printf(s, "GPIO %3d ", gpio); + seq_printf(s, "(%10s): %s %s", + label, is_in ? "in " : "out", value ? "hi" : "lo"); +/* FIXME for at least omap2, show pullup/pulldown state */ + irqstat = irq_desc[irq].status; if (is_in && ((bank->suspend_wakeup & mask) || irqstat & IRQ_TYPE_SENSE_MASK)) { @@ -1795,10 +1837,10 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) trigger = "high"; break; case IRQ_TYPE_NONE: - trigger = "(unspecified)"; + trigger = "(?)"; break; } - seq_printf(s, ", irq-%d %s%s", + seq_printf(s, ", irq-%d %-8s%s", irq, trigger, (bank->suspend_wakeup & mask) ? " wakeup" : ""); diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 1945ddfec18d..6f33f58bca45 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -355,7 +355,6 @@ static int omap_mbox_init(struct omap_mbox *mbox) "failed to register mailbox interrupt:%d\n", ret); goto fail_request_irq; } - enable_mbox_irq(mbox, IRQ_RX); mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work); if (!mq) { diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 75211f20ccb3..6f3f459731c8 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -3,9 +3,9 @@ * * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h * - * Copyright (C) 2003 - 2005 Nokia Corporation + * Copyright (C) 2003 - 2008 Nokia Corporation * - * Written by Tony Lindgren <tony.lindgren@nokia.com> + * Written by Tony Lindgren * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,21 +32,17 @@ #ifdef CONFIG_OMAP_MUX -#define OMAP24XX_L4_BASE 0x48000000 -#define OMAP24XX_PULL_ENA (1 << 3) -#define OMAP24XX_PULL_UP (1 << 4) +static struct omap_mux_cfg *mux_cfg; -static struct pin_config * pin_table; -static unsigned long pin_table_sz; - -extern struct pin_config * omap730_pins; -extern struct pin_config * omap1xxx_pins; -extern struct pin_config * omap24xx_pins; - -int __init omap_mux_register(struct pin_config * pins, unsigned long size) +int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg) { - pin_table = pins; - pin_table_sz = size; + if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0 + || !arch_mux_cfg->cfg_reg) { + printk(KERN_ERR "Invalid pin table\n"); + return -EINVAL; + } + + mux_cfg = arch_mux_cfg; return 0; } @@ -56,152 +52,26 @@ int __init omap_mux_register(struct pin_config * pins, unsigned long size) */ int __init_or_module omap_cfg_reg(const unsigned long index) { - static DEFINE_SPINLOCK(mux_spin_lock); - - unsigned long flags; - struct pin_config *cfg; - unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0, - pull_orig = 0, pull = 0; - unsigned int mask, warn = 0; + struct pin_config *reg; - if (!pin_table) - BUG(); + if (mux_cfg == NULL) { + printk(KERN_ERR "Pin mux table not initialized\n"); + return -ENODEV; + } - if (index >= pin_table_sz) { + if (index >= mux_cfg->size) { printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", - index, pin_table_sz); + index, mux_cfg->size); dump_stack(); return -ENODEV; } - cfg = (struct pin_config *)&pin_table[index]; - if (cpu_is_omap24xx()) { - u8 reg = 0; - - reg |= cfg->mask & 0x7; - if (cfg->pull_val) - reg |= OMAP24XX_PULL_ENA; - if(cfg->pu_pd_val) - reg |= OMAP24XX_PULL_UP; -#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) - { - u8 orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg); - u8 debug = 0; - -#ifdef CONFIG_OMAP_MUX_DEBUG - debug = cfg->debug; -#endif - warn = (orig != reg); - if (debug || warn) - printk("MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n", - cfg->name, - OMAP24XX_L4_BASE + cfg->mux_reg, - orig, reg); - } -#endif - omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg); + reg = (struct pin_config *)&mux_cfg->pins[index]; - return 0; - } - - /* Check the mux register in question */ - if (cfg->mux_reg) { - unsigned tmp1, tmp2; - - spin_lock_irqsave(&mux_spin_lock, flags); - reg_orig = omap_readl(cfg->mux_reg); - - /* The mux registers always seem to be 3 bits long */ - mask = (0x7 << cfg->mask_offset); - tmp1 = reg_orig & mask; - reg = reg_orig & ~mask; - - tmp2 = (cfg->mask << cfg->mask_offset); - reg |= tmp2; - - if (tmp1 != tmp2) - warn = 1; - - omap_writel(reg, cfg->mux_reg); - spin_unlock_irqrestore(&mux_spin_lock, flags); - } - - /* Check for pull up or pull down selection on 1610 */ - if (!cpu_is_omap15xx()) { - if (cfg->pu_pd_reg && cfg->pull_val) { - spin_lock_irqsave(&mux_spin_lock, flags); - pu_pd_orig = omap_readl(cfg->pu_pd_reg); - mask = 1 << cfg->pull_bit; - - if (cfg->pu_pd_val) { - if (!(pu_pd_orig & mask)) - warn = 1; - /* Use pull up */ - pu_pd = pu_pd_orig | mask; - } else { - if (pu_pd_orig & mask) - warn = 1; - /* Use pull down */ - pu_pd = pu_pd_orig & ~mask; - } - omap_writel(pu_pd, cfg->pu_pd_reg); - spin_unlock_irqrestore(&mux_spin_lock, flags); - } - } - - /* Check for an associated pull down register */ - if (cfg->pull_reg) { - spin_lock_irqsave(&mux_spin_lock, flags); - pull_orig = omap_readl(cfg->pull_reg); - mask = 1 << cfg->pull_bit; - - if (cfg->pull_val) { - if (pull_orig & mask) - warn = 1; - /* Low bit = pull enabled */ - pull = pull_orig & ~mask; - } else { - if (!(pull_orig & mask)) - warn = 1; - /* High bit = pull disabled */ - pull = pull_orig | mask; - } - - omap_writel(pull, cfg->pull_reg); - spin_unlock_irqrestore(&mux_spin_lock, flags); - } - - if (warn) { -#ifdef CONFIG_OMAP_MUX_WARNINGS - printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); -#endif - } - -#ifdef CONFIG_OMAP_MUX_DEBUG - if (cfg->debug || warn) { - printk("MUX: Setting register %s\n", cfg->name); - printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", - cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); - - if (!cpu_is_omap15xx()) { - if (cfg->pu_pd_reg && cfg->pull_val) { - printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", - cfg->pu_pd_name, cfg->pu_pd_reg, - pu_pd_orig, pu_pd); - } - } - - if (cfg->pull_reg) - printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", - cfg->pull_name, cfg->pull_reg, pull_orig, pull); - } -#endif + if (!mux_cfg->cfg_reg) + return -ENODEV; -#ifdef CONFIG_OMAP_MUX_ERRORS - return warn ? -ETXTBSY : 0; -#else - return 0; -#endif + return mux_cfg->cfg_reg(reg); } EXPORT_SYMBOL(omap_cfg_reg); #else diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index a5aedf964b88..a619475c4b76 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -33,6 +33,7 @@ #include <asm/system.h> #include <asm/hardware.h> +#include <asm/arch/control.h> #include <asm/arch/mux.h> #include <asm/arch/usb.h> #include <asm/arch/board.h> @@ -76,7 +77,7 @@ /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_ARCH_OMAP_OTG +#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_USB_MUSB_OTG) static struct otg_transceiver *xceiv; @@ -110,12 +111,48 @@ EXPORT_SYMBOL(otg_set_transceiver); #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX) +static void omap2_usb_devconf_clear(u8 port, u32 mask) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r &= ~USBTXWRMODEI(port, mask); + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static void omap2_usb_devconf_set(u8 port, u32 mask) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r |= USBTXWRMODEI(port, mask); + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static void omap2_usb2_disable_5pinbitll(void) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI); + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static void omap2_usb2_enable_5pinunitll(void) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI; + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; if (cpu_is_omap24xx()) - CONTROL_DEVCONF_REG &= ~USBT0WRMODEI(USB_BIDIR_TLL); + omap2_usb_devconf_clear(0, USB_BIDIR_TLL); if (nwires == 0) { if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { @@ -187,19 +224,19 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) case 3: syscon1 = 2; if (cpu_is_omap24xx()) - CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR); + omap2_usb_devconf_set(0, USB_BIDIR); break; case 4: syscon1 = 1; if (cpu_is_omap24xx()) - CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR); + omap2_usb_devconf_set(0, USB_BIDIR); break; case 6: syscon1 = 3; if (cpu_is_omap24xx()) { omap_cfg_reg(J19_24XX_USB0_VP); omap_cfg_reg(K20_24XX_USB0_VM); - CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_UNIDIR); + omap2_usb_devconf_set(0, USB_UNIDIR); } else { omap_cfg_reg(AA9_USB0_VP); omap_cfg_reg(R9_USB0_VM); @@ -220,7 +257,7 @@ static u32 __init omap_usb1_init(unsigned nwires) if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R; if (cpu_is_omap24xx()) - CONTROL_DEVCONF_REG &= ~USBT1WRMODEI(USB_BIDIR_TLL); + omap2_usb_devconf_clear(1, USB_BIDIR_TLL); if (nwires == 0) return 0; @@ -261,17 +298,17 @@ static u32 __init omap_usb1_init(unsigned nwires) * this TLL link is not using DP/DM */ syscon1 = 1; - CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR_TLL); + omap2_usb_devconf_set(1, USB_BIDIR_TLL); break; case 3: syscon1 = 2; if (cpu_is_omap24xx()) - CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR); + omap2_usb_devconf_set(1, USB_BIDIR); break; case 4: syscon1 = 1; if (cpu_is_omap24xx()) - CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR); + omap2_usb_devconf_set(1, USB_BIDIR); break; case 6: if (cpu_is_omap24xx()) @@ -295,8 +332,7 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) u32 syscon1 = 0; if (cpu_is_omap24xx()) { - CONTROL_DEVCONF_REG &= ~(USBT2WRMODEI(USB_BIDIR_TLL) - | USBT2TLL5PI); + omap2_usb2_disable_5pinbitll(); alt_pingroup = 0; } @@ -343,17 +379,17 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) * this TLL link is not using DP/DM */ syscon1 = 1; - CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR_TLL); + omap2_usb_devconf_set(2, USB_BIDIR_TLL); break; case 3: syscon1 = 2; if (cpu_is_omap24xx()) - CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR); + omap2_usb_devconf_set(2, USB_BIDIR); break; case 4: syscon1 = 1; if (cpu_is_omap24xx()) - CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR); + omap2_usb_devconf_set(2, USB_BIDIR); break; case 5: if (!cpu_is_omap24xx()) @@ -364,8 +400,7 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED} */ syscon1 = 3; - CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_UNIDIR_TLL) - | USBT2TLL5PI; + omap2_usb2_enable_5pinunitll(); break; case 6: if (cpu_is_omap24xx()) diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile new file mode 100644 index 000000000000..198f3dde2be3 --- /dev/null +++ b/arch/arm/plat-orion/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-y := irq.o pcie.o time.o +obj-m := +obj-n := +obj- := diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c new file mode 100644 index 000000000000..c5b669d234bc --- /dev/null +++ b/arch/arm/plat-orion/irq.c @@ -0,0 +1,64 @@ +/* + * arch/arm/plat-orion/irq.c + * + * Marvell Orion SoC IRQ handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/plat-orion/irq.h> + +static void orion_irq_mask(u32 irq) +{ + void __iomem *maskaddr = get_irq_chip_data(irq); + u32 mask; + + mask = readl(maskaddr); + mask &= ~(1 << (irq & 31)); + writel(mask, maskaddr); +} + +static void orion_irq_unmask(u32 irq) +{ + void __iomem *maskaddr = get_irq_chip_data(irq); + u32 mask; + + mask = readl(maskaddr); + mask |= 1 << (irq & 31); + writel(mask, maskaddr); +} + +static struct irq_chip orion_irq_chip = { + .name = "orion_irq", + .ack = orion_irq_mask, + .mask = orion_irq_mask, + .unmask = orion_irq_unmask, +}; + +void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) +{ + unsigned int i; + + /* + * Mask all interrupts initially. + */ + writel(0, maskaddr); + + /* + * Register IRQ sources. + */ + for (i = 0; i < 32; i++) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &orion_irq_chip); + set_irq_chip_data(irq, maskaddr); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } +} diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c new file mode 100644 index 000000000000..abfda53f1800 --- /dev/null +++ b/arch/arm/plat-orion/pcie.c @@ -0,0 +1,245 @@ +/* + * arch/arm/plat-orion/pcie.c + * + * Marvell Orion SoC PCIe handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/mbus.h> +#include <asm/mach/pci.h> +#include <asm/plat-orion/pcie.h> + +/* + * PCIe unit register offsets. + */ +#define PCIE_DEV_ID_OFF 0x0000 +#define PCIE_CMD_OFF 0x0004 +#define PCIE_DEV_REV_OFF 0x0008 +#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) +#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) +#define PCIE_HEADER_LOG_4_OFF 0x0128 +#define PCIE_BAR_CTRL_OFF(n) (0x1804 + ((n - 1) * 4)) +#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) +#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) +#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) +#define PCIE_WIN5_CTRL_OFF 0x1880 +#define PCIE_WIN5_BASE_OFF 0x1884 +#define PCIE_WIN5_REMAP_OFF 0x188c +#define PCIE_CONF_ADDR_OFF 0x18f8 +#define PCIE_CONF_ADDR_EN 0x80000000 +#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) +#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8) +#define PCIE_CONF_DATA_OFF 0x18fc +#define PCIE_MASK_OFF 0x1910 +#define PCIE_CTRL_OFF 0x1a00 +#define PCIE_STAT_OFF 0x1a04 +#define PCIE_STAT_DEV_OFFS 20 +#define PCIE_STAT_DEV_MASK 0x1f +#define PCIE_STAT_BUS_OFFS 8 +#define PCIE_STAT_BUS_MASK 0xff +#define PCIE_STAT_LINK_DOWN 1 + + +u32 __init orion_pcie_dev_id(void __iomem *base) +{ + return readl(base + PCIE_DEV_ID_OFF) >> 16; +} + +u32 __init orion_pcie_rev(void __iomem *base) +{ + return readl(base + PCIE_DEV_REV_OFF) & 0xff; +} + +int orion_pcie_link_up(void __iomem *base) +{ + return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); +} + +int orion_pcie_get_local_bus_nr(void __iomem *base) +{ + u32 stat = readl(base + PCIE_STAT_OFF); + + return (stat >> PCIE_STAT_BUS_OFFS) & PCIE_STAT_BUS_MASK; +} + +void __init orion_pcie_set_local_bus_nr(void __iomem *base, int nr) +{ + u32 stat; + + stat = readl(base + PCIE_STAT_OFF); + stat &= ~(PCIE_STAT_BUS_MASK << PCIE_STAT_BUS_OFFS); + stat |= nr << PCIE_STAT_BUS_OFFS; + writel(stat, base + PCIE_STAT_OFF); +} + +/* + * Setup PCIE BARs and Address Decode Wins: + * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks + * WIN[0-3] -> DRAM bank[0-3] + */ +static void __init orion_pcie_setup_wins(void __iomem *base, + struct mbus_dram_target_info *dram) +{ + u32 size; + int i; + + /* + * First, disable and clear BARs and windows. + */ + for (i = 1; i <= 2; i++) { + writel(0, base + PCIE_BAR_CTRL_OFF(i)); + writel(0, base + PCIE_BAR_LO_OFF(i)); + writel(0, base + PCIE_BAR_HI_OFF(i)); + } + + for (i = 0; i < 5; i++) { + writel(0, base + PCIE_WIN04_CTRL_OFF(i)); + writel(0, base + PCIE_WIN04_BASE_OFF(i)); + writel(0, base + PCIE_WIN04_REMAP_OFF(i)); + } + + writel(0, base + PCIE_WIN5_CTRL_OFF); + writel(0, base + PCIE_WIN5_BASE_OFF); + writel(0, base + PCIE_WIN5_REMAP_OFF); + + /* + * Setup windows for DDR banks. Count total DDR size on the fly. + */ + size = 0; + for (i = 0; i < dram->num_cs; i++) { + struct mbus_dram_window *cs = dram->cs + i; + + writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i)); + writel(0, base + PCIE_WIN04_REMAP_OFF(i)); + writel(((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + base + PCIE_WIN04_CTRL_OFF(i)); + + size += cs->size; + } + + /* + * Setup BAR[1] to all DRAM banks. + */ + writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1)); + writel(0, base + PCIE_BAR_HI_OFF(1)); + writel(((size - 1) & 0xffff0000) | 1, base + PCIE_BAR_CTRL_OFF(1)); +} + +void __init orion_pcie_setup(void __iomem *base, + struct mbus_dram_target_info *dram) +{ + u16 cmd; + u32 mask; + + /* + * Point PCIe unit MBUS decode windows to DRAM space. + */ + orion_pcie_setup_wins(base, dram); + + /* + * Master + slave enable. + */ + cmd = readw(base + PCIE_CMD_OFF); + cmd |= PCI_COMMAND_IO; + cmd |= PCI_COMMAND_MEMORY; + cmd |= PCI_COMMAND_MASTER; + writew(cmd, base + PCIE_CMD_OFF); + + /* + * Enable interrupt lines A-D. + */ + mask = readl(base + PCIE_MASK_OFF); + mask |= 0x0f000000; + writel(mask, base + PCIE_MASK_OFF); +} + +int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + writel(PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN, + base + PCIE_CONF_ADDR_OFF); + + *val = readl(base + PCIE_CONF_DATA_OFF); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + writel(PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN, + base + PCIE_CONF_ADDR_OFF); + + *val = readl(base + PCIE_CONF_DATA_OFF); + + if (bus->number != orion_pcie_get_local_bus_nr(base) || + PCI_FUNC(devfn) != 0) + *val = readl(base + PCIE_HEADER_LOG_4_OFF); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + *val = readl(wa_base + (PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where))); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 val) +{ + int ret = PCIBIOS_SUCCESSFUL; + + writel(PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN, + base + PCIE_CONF_ADDR_OFF); + + if (size == 4) { + writel(val, base + PCIE_CONF_DATA_OFF); + } else if (size == 2) { + writew(val, base + PCIE_CONF_DATA_OFF + (where & 3)); + } else if (size == 1) { + writeb(val, base + PCIE_CONF_DATA_OFF + (where & 3)); + } else { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + } + + return ret; +} diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c new file mode 100644 index 000000000000..28b5285446e8 --- /dev/null +++ b/arch/arm/plat-orion/time.c @@ -0,0 +1,203 @@ +/* + * arch/arm/plat-orion/time.c + * + * Marvell Orion SoC timer handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Timer 0 is used as free-running clocksource, while timer 1 is + * used as clock_event_device. + */ + +#include <linux/kernel.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <asm/mach/time.h> +#include <asm/arch/hardware.h> + +/* + * Number of timer ticks per jiffy. + */ +static u32 ticks_per_jiffy; + + +/* + * Timer block registers. + */ +#define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000) +#define TIMER0_EN 0x0001 +#define TIMER0_RELOAD_EN 0x0002 +#define TIMER1_EN 0x0004 +#define TIMER1_RELOAD_EN 0x0008 +#define TIMER0_RELOAD (TIMER_VIRT_BASE + 0x0010) +#define TIMER0_VAL (TIMER_VIRT_BASE + 0x0014) +#define TIMER1_RELOAD (TIMER_VIRT_BASE + 0x0018) +#define TIMER1_VAL (TIMER_VIRT_BASE + 0x001c) + + +/* + * Clocksource handling. + */ +static cycle_t orion_clksrc_read(void) +{ + return 0xffffffff - readl(TIMER0_VAL); +} + +static struct clocksource orion_clksrc = { + .name = "orion_clocksource", + .shift = 20, + .rating = 300, + .read = orion_clksrc_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + + + +/* + * Clockevent handling. + */ +static int +orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) +{ + unsigned long flags; + u32 u; + + if (delta == 0) + return -ETIME; + + local_irq_save(flags); + + /* + * Clear and enable clockevent timer interrupt. + */ + writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE); + + u = readl(BRIDGE_MASK); + u |= BRIDGE_INT_TIMER1; + writel(u, BRIDGE_MASK); + + /* + * Setup new clockevent timer value. + */ + writel(delta, TIMER1_VAL); + + /* + * Enable the timer. + */ + u = readl(TIMER_CTRL); + u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN; + writel(u, TIMER_CTRL); + + local_irq_restore(flags); + + return 0; +} + +static void +orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + unsigned long flags; + u32 u; + + local_irq_save(flags); + if (mode == CLOCK_EVT_MODE_PERIODIC) { + /* + * Setup timer to fire at 1/HZ intervals. + */ + writel(ticks_per_jiffy - 1, TIMER1_RELOAD); + writel(ticks_per_jiffy - 1, TIMER1_VAL); + + /* + * Enable timer interrupt. + */ + u = readl(BRIDGE_MASK); + writel(u | BRIDGE_INT_TIMER1, BRIDGE_MASK); + + /* + * Enable timer. + */ + u = readl(TIMER_CTRL); + writel(u | TIMER1_EN | TIMER1_RELOAD_EN, TIMER_CTRL); + } else { + /* + * Disable timer. + */ + u = readl(TIMER_CTRL); + writel(u & ~TIMER1_EN, TIMER_CTRL); + + /* + * Disable timer interrupt. + */ + u = readl(BRIDGE_MASK); + writel(u & ~BRIDGE_INT_TIMER1, BRIDGE_MASK); + + /* + * ACK pending timer interrupt. + */ + writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE); + + } + local_irq_restore(flags); +} + +static struct clock_event_device orion_clkevt = { + .name = "orion_tick", + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .shift = 32, + .rating = 300, + .cpumask = CPU_MASK_CPU0, + .set_next_event = orion_clkevt_next_event, + .set_mode = orion_clkevt_mode, +}; + +static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) +{ + /* + * ACK timer interrupt and call event handler. + */ + writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE); + orion_clkevt.event_handler(&orion_clkevt); + + return IRQ_HANDLED; +} + +static struct irqaction orion_timer_irq = { + .name = "orion_tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = orion_timer_interrupt +}; + +void __init orion_time_init(unsigned int irq, unsigned int tclk) +{ + u32 u; + + ticks_per_jiffy = (tclk + HZ/2) / HZ; + + + /* + * Setup free-running clocksource timer (interrupts + * disabled.) + */ + writel(0xffffffff, TIMER0_VAL); + writel(0xffffffff, TIMER0_RELOAD); + u = readl(BRIDGE_MASK); + writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK); + u = readl(TIMER_CTRL); + writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL); + orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift); + clocksource_register(&orion_clksrc); + + + /* + * Setup clockevent timer (interrupt-driven.) + */ + setup_irq(irq, &orion_timer_irq); + orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift); + orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt); + orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt); + clockevents_register_device(&orion_clkevt); +} diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index 99a44746f8f2..3ac8d8d781b3 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -332,6 +332,58 @@ static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) return 0; } +static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) +{ + unsigned long div; + + if ((rate == 0) || !clk->parent) + return 0; + + div = clk_get_rate(clk->parent) / rate; + if (div < 2) + div = 2; + else if (div > 16) + div = 16; + + return div; +} + +static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long div = s3c24xx_calc_div(clk, rate); + + if (div == 0) + return 0; + + return clk_get_rate(clk->parent) / div; +} + +static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) +{ + unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); + + if (div == 0) + return -EINVAL; + + if (clk == &s3c24xx_dclk0) { + mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | + S3C2410_DCLKCON_DCLK0_CMP_MASK; + data = S3C2410_DCLKCON_DCLK0_DIV(div) | + S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); + } else if (clk == &s3c24xx_dclk1) { + mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | + S3C2410_DCLKCON_DCLK1_CMP_MASK; + data = S3C2410_DCLKCON_DCLK1_DIV(div) | + S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); + } else + return -EINVAL; + + clk->rate = clk_get_rate(clk->parent) / div; + __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), + S3C24XX_DCLKCON); + return clk->rate; +} static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) { @@ -359,7 +411,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) clk->parent = parent; - if (clk == &s3c24xx_dclk0) + if (clk == &s3c24xx_clkout0) mask = S3C2410_MISCCR_CLK0_MASK; else { source <<= 4; @@ -378,14 +430,18 @@ struct clk s3c24xx_dclk0 = { .ctrlbit = S3C2410_DCLKCON_DCLK0EN, .enable = s3c24xx_dclk_enable, .set_parent = s3c24xx_dclk_setparent, + .set_rate = s3c24xx_set_dclk_rate, + .round_rate = s3c24xx_round_dclk_rate, }; struct clk s3c24xx_dclk1 = { .name = "dclk1", .id = -1, - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, + .ctrlbit = S3C2410_DCLKCON_DCLK1EN, .enable = s3c24xx_dclk_enable, .set_parent = s3c24xx_dclk_setparent, + .set_rate = s3c24xx_set_dclk_rate, + .round_rate = s3c24xx_round_dclk_rate, }; struct clk s3c24xx_clkout0 = { diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index f513ab083b8f..f5699cadb0c3 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -28,15 +28,19 @@ #include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <asm/hardware.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/delay.h> +#include <asm/cacheflush.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/arch/system-reset.h> + #include <asm/arch/regs-gpio.h> #include <asm/plat-s3c/regs-serial.h> @@ -203,6 +207,27 @@ static unsigned long s3c24xx_read_idcode_v4(void) #endif } +/* Hook for arm_pm_restart to ensure we execute the reset code + * with the caches enabled. It seems at least the S3C2440 has a problem + * resetting if there is bus activity interrupted by the reset. + */ +static void s3c24xx_pm_restart(char mode) +{ + if (mode != 's') { + unsigned long flags; + + local_irq_save(flags); + __cpuc_flush_kern_all(); + __cpuc_flush_user_all(); + + arch_reset(mode); + local_irq_restore(flags); + } + + /* fallback, or unhandled */ + arm_machine_restart(mode); +} + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { unsigned long idcode = 0x0; @@ -230,6 +255,8 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) panic("Unsupported S3C24XX CPU"); } + arm_pm_restart = s3c24xx_pm_restart; + (cpu->map_io)(mach_desc, size); } diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index f197bb3a2366..2f01af5f64c4 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size) /* rename any peripherals used differing from the s3c2410 */ + s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_i2c.name = "s3c2440-i2c"; s3c_device_nand.name = "s3c2440-nand"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 7ed58c0c24c2..207a8b5a0c4a 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Jan 26 14:45:34 2008 +# Last update: Sat Apr 19 11:23:38 2008 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -381,13 +381,13 @@ ks8695p ARCH_KS8695P KS8695P 363 se4000 ARCH_SE4000 SE4000 364 quadriceps ARCH_QUADRICEPS QUADRICEPS 365 bronco ARCH_BRONCO BRONCO 366 -esl_wireless_tab ARCH_ESL_WIRELESS_TABLETESL_WIRELESS_TABLET 367 +esl_wireless_tab ARCH_ESL_WIRELESS_TAB ESL_WIRELESS_TAB 367 esl_sofcomp ARCH_ESL_SOFCOMP ESL_SOFCOMP 368 s5c7375 ARCH_S5C7375 S5C7375 369 spearhead ARCH_SPEARHEAD SPEARHEAD 370 pantera ARCH_PANTERA PANTERA 371 prayoglite ARCH_PRAYOGLITE PRAYOGLITE 372 -gumstix ARCH_GUMSTIK GUMSTIK 373 +gumstix ARCH_GUMSTIX GUMSTIX 373 rcube ARCH_RCUBE RCUBE 374 rea_olv ARCH_REA_OLV REA_OLV 375 pxa_iphone ARCH_PXA_IPHONE PXA_IPHONE 376 @@ -1463,7 +1463,7 @@ artemis MACH_ARTEMIS ARTEMIS 1462 htctitan MACH_HTCTITAN HTCTITAN 1463 qranium MACH_QRANIUM QRANIUM 1464 adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465 -adx_medinet MACH_ADX_MEDINET ADX_MEDINET 1466 +adx_medcom MACH_ADX_MEDINET ADX_MEDINET 1466 bboard MACH_BBOARD BBOARD 1467 cambria MACH_CAMBRIA CAMBRIA 1468 mt7xxx MACH_MT7XXX MT7XXX 1469 @@ -1611,3 +1611,112 @@ kb9263 MACH_KB9263 KB9263 1612 mt7108 MACH_MT7108 MT7108 1613 smtr2440 MACH_SMTR2440 SMTR2440 1614 manao MACH_MANAO MANAO 1615 +cm_x300 MACH_CM_X300 CM_X300 1616 +gulfstream_kp MACH_GULFSTREAM_KP GULFSTREAM_KP 1617 +lanreadyfn522 MACH_LANREADYFN522 LANREADYFN522 1618 +arma37 MACH_ARMA37 ARMA37 1619 +mendel MACH_MENDEL MENDEL 1620 +pelco_iliad MACH_PELCO_ILIAD PELCO_ILIAD 1621 +unit2p MACH_UNIT2P UNIT2P 1622 +inc20otter MACH_INC20OTTER INC20OTTER 1623 +at91sam9g20ek MACH_AT91SAM9G20EK AT91SAM9G20EK 1624 +sc_ge2 MACH_STORCENTER STORCENTER 1625 +smdk6410 MACH_SMDK6410 SMDK6410 1626 +u300 MACH_U300 U300 1627 +u500 MACH_U500 U500 1628 +ds9260 MACH_DS9260 DS9260 1629 +riverrock MACH_RIVERROCK RIVERROCK 1630 +scibath MACH_SCIBATH SCIBATH 1631 +at91sam7se MACH_AT91SAM7SE512EK AT91SAM7SE512EK 1632 +wrt350n_v2 MACH_WRT350N_V2 WRT350N_V2 1633 +multimedia MACH_MULTIMEDIA MULTIMEDIA 1634 +marvin MACH_MARVIN MARVIN 1635 +x500 MACH_X500 X500 1636 +awlug4lcu MACH_AWLUG4LCU AWLUG4LCU 1637 +palermoc MACH_PALERMOC PALERMOC 1638 +omap_ldp MACH_OMAP_LDP OMAP_LDP 1639 +ip500 MACH_IP500 IP500 1640 +mx35ads MACH_MACH_MX35ADS MACH_MX35ADS 1641 +ase2 MACH_ASE2 ASE2 1642 +mx35evb MACH_MX35EVB MX35EVB 1643 +aml_m8050 MACH_AML_M8050 AML_M8050 1644 +mx35_3ds MACH_MX35_3DS MX35_3DS 1645 +mars MACH_MARS MARS 1646 +ntosd_644xa MACH_NTOSD_644XA NTOSD_644XA 1647 +badger MACH_BADGER BADGER 1648 +trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649 +trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650 +marlin MACH_MARLIN MARLIN 1651 +ts7800 MACH_TS7800 TS7800 1652 +hpipaq214 MACH_HPIPAQ214 HPIPAQ214 1653 +at572d940dcm MACH_AT572D940DCM AT572D940DCM 1654 +ne1board MACH_NE1BOARD NE1BOARD 1655 +zante MACH_ZANTE ZANTE 1656 +sffsdr MACH_SFFSDR SFFSDR 1657 +tw2662 MACH_TW2662 TW2662 1658 +vf10xx MACH_VF10XX VF10XX 1659 +zoran43xx MACH_ZORAN43XX ZORAN43XX 1660 +sonix926 MACH_SONIX926 SONIX926 1661 +celestialsemi MACH_CELESTIALSEMI CELESTIALSEMI 1662 +cc9m2443 MACH_CC9M2443 CC9M2443 1663 +tw5334 MACH_TW5334 TW5334 1664 +omap_htcartemis MACH_HTCARTEMIS HTCARTEMIS 1665 +nal_hlite MACH_NAL_HLITE NAL_HLITE 1666 +htcvogue MACH_HTCVOGUE HTCVOGUE 1667 +smartweb MACH_SMARTWEB SMARTWEB 1668 +mv86xx MACH_MV86XX MV86XX 1669 +mv87xx MACH_MV87XX MV87XX 1670 +songyoungho MACH_SONGYOUNGHO SONGYOUNGHO 1671 +younghotema MACH_YOUNGHOTEMA YOUNGHOTEMA 1672 +pcm037 MACH_PCM037 PCM037 1673 +mmvp MACH_MMVP MMVP 1674 +mmap MACH_MMAP MMAP 1675 +ptid2410 MACH_PTID2410 PTID2410 1676 +james_926 MACH_JAMES_926 JAMES_926 1677 +fm6000 MACH_FM6000 FM6000 1678 +db88f6281_bp MACH_DB88F6281_BP DB88F6281_BP 1680 +rd88f6192_nas MACH_RD88F6192_NAS RD88F6192_NAS 1681 +rd88f6281 MACH_RD88F6281 RD88F6281 1682 +db78x00_bp MACH_DB78X00_BP DB78X00_BP 1683 +smdk2416 MACH_SMDK2416 SMDK2416 1685 +oce_spider_si MACH_OCE_SPIDER_SI OCE_SPIDER_SI 1686 +oce_spider_sk MACH_OCE_SPIDER_SK OCE_SPIDER_SK 1687 +rovern6 MACH_ROVERN6 ROVERN6 1688 +pelco_evolution MACH_PELCO_EVOLUTION PELCO_EVOLUTION 1689 +wbd111 MACH_WBD111 WBD111 1690 +elaracpe MACH_ELARACPE ELARACPE 1691 +mabv3 MACH_MABV3 MABV3 1692 +mv2120 MACH_MV2120 MV2120 1693 +csb737 MACH_CSB737 CSB737 1695 +mx51_3ds MACH_MX51_3DS MX51_3DS 1696 +g900 MACH_G900 G900 1697 +apf27 MACH_APF27 APF27 1698 +ggus2000 MACH_GGUS2000 GGUS2000 1699 +omap_2430_mimic MACH_OMAP_2430_MIMIC OMAP_2430_MIMIC 1700 +imx27lite MACH_IMX27LITE IMX27LITE 1701 +almex MACH_ALMEX ALMEX 1702 +control MACH_CONTROL CONTROL 1703 +mba2410 MACH_MBA2410 MBA2410 1704 +volcano MACH_VOLCANO VOLCANO 1705 +zenith MACH_ZENITH ZENITH 1706 +muchip MACH_MUCHIP MUCHIP 1707 +magellan MACH_MAGELLAN MAGELLAN 1708 +usb_a9260 MACH_USB_A9260 USB_A9260 1709 +usb_a9263 MACH_USB_A9263 USB_A9263 1710 +qil_a9260 MACH_QIL_A9260 QIL_A9260 1711 +cme9210 MACH_CME9210 CME9210 1712 +hczh4 MACH_HCZH4 HCZH4 1713 +spearbasic MACH_SPEARBASIC SPEARBASIC 1714 +dep2440 MACH_DEP2440 DEP2440 1715 +hdl_gxr MACH_HDL_GXR HDL_GXR 1716 +hdl_gt MACH_HDL_GT HDL_GT 1717 +hdl_4g MACH_HDL_4G HDL_4G 1718 +s3c6000 MACH_S3C6000 S3C6000 1719 +mmsp2_mdk MACH_MMSP2_MDK MMSP2_MDK 1720 +mpx220 MACH_MPX220 MPX220 1721 +kzm_arm11_01 MACH_KZM_ARM11_01 KZM_ARM11_01 1722 +htc_polaris MACH_HTC_POLARIS HTC_POLARIS 1723 +htc_kaiser MACH_HTC_KAISER HTC_KAISER 1724 +lg_ks20 MACH_LG_KS20 LG_KS20 1725 +hhgps MACH_HHGPS HHGPS 1726 +nokia_n810_wimax MACH_NOKIA_N810_WIMAX NOKIA_N810_WIMAX 1727 |
