diff options
Diffstat (limited to 'arch/arm')
125 files changed, 981 insertions, 1671 deletions
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 63d7578856c1..a1dd2ee83753 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -29,6 +29,7 @@ compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; + cpu-offset = <0x8000>; reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 1a1d7023b69b..825d2957da0b 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -46,11 +46,11 @@ }; serial@70006200 { - status = "disable"; + clock-frequency = <216000000>; }; serial@70006300 { - clock-frequency = <216000000>; + status = "disable"; }; serial@70006400 { @@ -60,7 +60,7 @@ sdhci@c8000000 { cd-gpios = <&gpio 173 0>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 169 0>; /* gpio PV1 */ }; sdhci@c8000200 { diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index d1bcd7b13ebc..fb1f1cfce60c 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -320,13 +320,6 @@ err0: return -EBUSY; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as we don't have even crappy BIOSes to set it properly. - * The implementation is from arch/i386/pci/i386.c - */ -unsigned int pcibios_max_latency = 255; - /* ITE bridge requires setting latency timer to avoid early bus access termination by PCI bus master devices */ diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index d8e44a43047c..ff3ad2244824 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active = thrd->req_running; + int ret = 0, active; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; pl330 = thrd->dmac; + active = thrd->req_running; spin_lock_irqsave(&pl330->lock, flags); diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 62f8095d46de..23371b17b23e 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -137,6 +137,11 @@ disable_irq .endm + .macro save_and_disable_irqs_notrace, oldcpsr + mrs \oldcpsr, cpsr + disable_irq_notrace + .endm + /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h index 575fa8186ca0..c1821385abfa 100644 --- a/arch/arm/include/asm/hardware/pl330.h +++ b/arch/arm/include/asm/hardware/pl330.h @@ -41,7 +41,7 @@ enum pl330_dstcachectrl { DCCTRL1, /* Bufferable only */ DCCTRL2, /* Cacheable, but do not allocate */ DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, + DINVALID1, /* AWCACHE = 0x1000 */ DINVALID2, DCCTRL6, /* Cacheable write-through, allocate on writes only */ DCCTRL7, /* Cacheable write-back, allocate on writes only */ diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index ce280b8d613c..cb8d638924fd 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,6 +22,7 @@ #include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> +#include <asm/system.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 5d3ed7e38561..314d4664eae7 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) { pgtable_page_dtor(pte); - tlb_add_flush(tlb, addr); + + /* + * With the classic ARM MMU, a pte page has two corresponding pmd + * entries, each covering 1MB. + */ + addr &= PMD_MASK; + tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); + tlb_add_flush(tlb, addr + SZ_1M); + tlb_remove_page(tlb, pte); } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3a456c6c7005..be16a48007b4 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -790,7 +790,7 @@ __kuser_cmpxchg64: @ 0xffff0f60 smp_dmb arm rsbs r0, r3, #0 @ set returned val and C flag ldmfd sp!, {r4, r5, r6, r7} - bx lr + usr_ret lr #elif !defined(CONFIG_SMP) diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 460bbbb6b885..6933244c68f9 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* @@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e1d5e1929fbd..ede6443c34d9 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -23,6 +23,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/regset.h> +#include <linux/audit.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -699,10 +700,13 @@ static int vfp_set(struct task_struct *target, { int ret; struct thread_info *thread = task_thread_info(target); - struct vfp_hard_struct new_vfp = thread->vfpstate.hard; + struct vfp_hard_struct new_vfp; const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs); const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr); + vfp_sync_hwstate(thread); + new_vfp = thread->vfpstate.hard; + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &new_vfp.fpregs, user_fpregs_offset, @@ -723,9 +727,8 @@ static int vfp_set(struct task_struct *target, if (ret) return ret; - vfp_sync_hwstate(thread); - thread->vfpstate.hard = new_vfp; vfp_flush_hwstate(thread); + thread->vfpstate.hard = new_vfp; return 0; } @@ -902,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +#ifdef __ARMEB__ +#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB +#else +#define AUDIT_ARCH_NR AUDIT_ARCH_ARM +#endif + asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -916,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (!ip) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 0340224cf73c..9e617bd4a146 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) return -EINVAL; + vfp_flush_hwstate(thread); + /* * Copy the floating point registers. There can be unused * registers see asm/hwcap.h for details. @@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - if (!err) - vfp_flush_hwstate(thread); - return err ? -EFAULT : 0; } diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 4285daa077b0..7a79b24597b2 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (!IS_ERR(twd_clk)) + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 99a572702509..f84dfe67724f 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err) { struct thread_info *thread = current_thread_info(); int ret; + enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; oops_enter(); @@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err) console_verbose(); bust_spinlocks(1); if (!user_mode(regs)) - report_bug(regs->ARM_pc, regs); + bug_type = report_bug(regs->ARM_pc, regs); + if (bug_type != BUG_TRAP_TYPE_NONE) + str = "Oops - BUG"; ret = __die(str, err, thread, regs); if (regs && kexec_should_crash(thread->task)) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 1e19691e0406..43a31fb06318 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -10,6 +10,7 @@ #include <asm/page.h> #define PROC_INFO \ + . = ALIGN(4); \ VMLINUX_SYMBOL(__proc_info_begin) = .; \ *(.proc.info.init) \ VMLINUX_SYMBOL(__proc_info_end) = .; diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 18bacec2b094..97676bdae998 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 642ccb6d26b2..5a24f0b4554d 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {} * CF/IDE * -------------------------------------------------------------------- */ -#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \ - defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data) if (data->flags & AT91_CF_TRUE_IDE) #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) pdev->name = "pata_at91"; -#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) - pdev->name = "at91_ide"; #else -#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91" +#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91" #endif else pdev->name = "at91_cf"; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index fc59cbdb0e3c..1e28bed8f425 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 7b46b2787022..366a7765635b 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * Compact Flash (PCMCIA or IDE) * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ - defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ + defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; + pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf"; platform_device_register(pdev); } #else diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h index eb18a70fa647..175e1fdd9fe8 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h @@ -18,6 +18,35 @@ #include <mach/cpu.h> +#ifndef __ASSEMBLY__ +struct sam9_smc_config { + /* Setup register */ + u8 ncs_read_setup; + u8 nrd_setup; + u8 ncs_write_setup; + u8 nwe_setup; + + /* Pulse register */ + u8 ncs_read_pulse; + u8 nrd_pulse; + u8 ncs_write_pulse; + u8 nwe_pulse; + + /* Cycle register */ + u16 read_cycle; + u16 write_cycle; + + /* Mode register */ + u32 mode; + u8 tdf_cycles:4; +}; + +extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config); +#endif + #define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */ #define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ #define AT91_SMC_NWESETUP_(x) ((x) << 0) diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c index 8294783b679d..99a0a1d2b7dc 100644 --- a/arch/arm/mach-at91/sam9_smc.c +++ b/arch/arm/mach-at91/sam9_smc.c @@ -2,6 +2,7 @@ * linux/arch/arm/mach-at91/sam9_smc.c * * Copyright (C) 2008 Andrew Victor + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,7 +23,22 @@ static void __iomem *smc_base_addr[2]; -static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config) +static void sam9_smc_cs_write_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + __raw_writel(config->mode + | AT91_SMC_TDF_(config->tdf_cycles), + base + AT91_SMC_MODE); +} + +void sam9_smc_write_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_configure(void __iomem *base, + struct sam9_smc_config *config) { /* Setup register */ @@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con base + AT91_SMC_CYCLE); /* Mode register */ - __raw_writel(config->mode - | AT91_SMC_TDF_(config->tdf_cycles), - base + AT91_SMC_MODE); + sam9_smc_cs_write_mode(base, config); } -void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config) +void sam9_smc_configure(int id, int cs, + struct sam9_smc_config *config) { sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); } +static void sam9_smc_cs_read_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val = __raw_readl(base + AT91_SMC_MODE); + + config->mode = (val & ~AT91_SMC_NWECYCLE); + config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ; +} + +void sam9_smc_read_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_read(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val; + + /* Setup register */ + val = __raw_readl(base + AT91_SMC_SETUP); + + config->nwe_setup = val & AT91_SMC_NWESETUP; + config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8; + config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16; + config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24; + + /* Pulse register */ + val = __raw_readl(base + AT91_SMC_PULSE); + + config->nwe_setup = val & AT91_SMC_NWEPULSE; + config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8; + config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16; + config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24; + + /* Cycle register */ + val = __raw_readl(base + AT91_SMC_CYCLE); + + config->write_cycle = val & AT91_SMC_NWECYCLE; + config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16; + + /* Mode register */ + sam9_smc_cs_read_mode(base, config); +} + +void sam9_smc_read(int id, int cs, struct sam9_smc_config *config) +{ + sam9_smc_cs_read(AT91_SMC_CS(id, cs), config); +} + void __init at91sam9_ioremap_smc(int id, u32 addr) { if (id > 1) { diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h index 039c5ce17aec..3e52dcd4a59f 100644 --- a/arch/arm/mach-at91/sam9_smc.h +++ b/arch/arm/mach-at91/sam9_smc.h @@ -8,27 +8,4 @@ * published by the Free Software Foundation. */ -struct sam9_smc_config { - /* Setup register */ - u8 ncs_read_setup; - u8 nrd_setup; - u8 ncs_write_setup; - u8 nwe_setup; - - /* Pulse register */ - u8 ncs_read_pulse; - u8 nrd_pulse; - u8 ncs_write_pulse; - u8 nwe_pulse; - - /* Cycle register */ - u16 read_cycle; - u16 write_cycle; - - /* Mode register */ - u32 mode; - u8 tdf_cycles:4; -}; - -extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config); extern void __init at91sam9_ioremap_smc(int id, u32 addr); diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 9e5e7552498c..45c97b1ee9b1 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING") .init_early = bcmring_init_early, .init_irq = bcmring_init_irq, .timer = &bcmring_timer, - .init_machine = bcmring_init_machine + .init_machine = bcmring_init_machine, .restart = bcmring_restart, MACHINE_END diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 1a1a27dd5654..1024396797e1 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -33,17 +33,11 @@ #include <mach/timer.h> -#include <linux/mm.h> #include <linux/pfn.h> #include <linux/atomic.h> #include <linux/sched.h> #include <mach/dma.h> -/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */ -/* especially since dc4 doesn't use kmalloc'd memory. */ - -#define ALLOW_MAP_OF_KMALLOC_MEMORY 0 - /* ---- Public Variables ------------------------------------------------- */ /* ---- Private Constants and Types -------------------------------------- */ @@ -53,24 +47,12 @@ #define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f) #define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f) -#define DMA_MAP_DEBUG 0 - -#if DMA_MAP_DEBUG -# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args) -#else -# define DMA_MAP_PRINT(fmt, args...) -#endif /* ---- Private Variables ------------------------------------------------ */ static DMA_Global_t gDMA; static struct proc_dir_entry *gDmaDir; -static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0); - #include "dma_device.c" /* ---- Private Function Prototypes -------------------------------------- */ @@ -79,34 +61,6 @@ static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0); /****************************************************************************/ /** -* Displays information for /proc/dma/mem-type -*/ -/****************************************************************************/ - -static int dma_proc_read_mem_type(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int len = 0; - - len += sprintf(buf + len, "dma_map_mem statistics\n"); - len += - sprintf(buf + len, "coherent: %d\n", - atomic_read(&gDmaStatMemTypeCoherent)); - len += - sprintf(buf + len, "kmalloc: %d\n", - atomic_read(&gDmaStatMemTypeKmalloc)); - len += - sprintf(buf + len, "vmalloc: %d\n", - atomic_read(&gDmaStatMemTypeVmalloc)); - len += - sprintf(buf + len, "user: %d\n", - atomic_read(&gDmaStatMemTypeUser)); - - return len; -} - -/****************************************************************************/ -/** * Displays information for /proc/dma/channels */ /****************************************************************************/ @@ -846,8 +800,6 @@ int dma_init(void) dma_proc_read_channels, NULL); create_proc_read_entry("devices", 0, gDmaDir, dma_proc_read_devices, NULL); - create_proc_read_entry("mem-type", 0, gDmaDir, - dma_proc_read_mem_type, NULL); } out: @@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. } EXPORT_SYMBOL(dma_set_device_handler); - -/****************************************************************************/ -/** -* Initializes a memory mapping structure -*/ -/****************************************************************************/ - -int dma_init_mem_map(DMA_MemMap_t *memMap) -{ - memset(memMap, 0, sizeof(*memMap)); - - sema_init(&memMap->lock, 1); - - return 0; -} - -EXPORT_SYMBOL(dma_init_mem_map); - -/****************************************************************************/ -/** -* Releases any memory currently being held by a memory mapping structure. -*/ -/****************************************************************************/ - -int dma_term_mem_map(DMA_MemMap_t *memMap) -{ - down(&memMap->lock); /* Just being paranoid */ - - /* Free up any allocated memory */ - - up(&memMap->lock); - memset(memMap, 0, sizeof(*memMap)); - - return 0; -} - -EXPORT_SYMBOL(dma_term_mem_map); - -/****************************************************************************/ -/** -* Looks at a memory address and categorizes it. -* -* @return One of the values from the DMA_MemType_t enumeration. -*/ -/****************************************************************************/ - -DMA_MemType_t dma_mem_type(void *addr) -{ - unsigned long addrVal = (unsigned long)addr; - - if (addrVal >= CONSISTENT_BASE) { - /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */ - - /* dma_alloc_xxx pages are physically and virtually contiguous */ - - return DMA_MEM_TYPE_DMA; - } - - /* Technically, we could add one more classification. Addresses between VMALLOC_END */ - /* and the beginning of the DMA virtual address could be considered to be I/O space. */ - /* Right now, nobody cares about this particular classification, so we ignore it. */ - - if (is_vmalloc_addr(addr)) { - /* Address comes from the vmalloc'd region. Pages are virtually */ - /* contiguous but NOT physically contiguous */ - - return DMA_MEM_TYPE_VMALLOC; - } - - if (addrVal >= PAGE_OFFSET) { - /* PAGE_OFFSET is typically 0xC0000000 */ - - /* kmalloc'd pages are physically contiguous */ - - return DMA_MEM_TYPE_KMALLOC; - } - - return DMA_MEM_TYPE_USER; -} - -EXPORT_SYMBOL(dma_mem_type); - -/****************************************************************************/ -/** -* Looks at a memory address and determines if we support DMA'ing to/from -* that type of memory. -* -* @return boolean - -* return value != 0 means dma supported -* return value == 0 means dma not supported -*/ -/****************************************************************************/ - -int dma_mem_supports_dma(void *addr) -{ - DMA_MemType_t memType = dma_mem_type(addr); - - return (memType == DMA_MEM_TYPE_DMA) -#if ALLOW_MAP_OF_KMALLOC_MEMORY - || (memType == DMA_MEM_TYPE_KMALLOC) -#endif - || (memType == DMA_MEM_TYPE_USER); -} - -EXPORT_SYMBOL(dma_mem_supports_dma); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ) { - int rc; - - down(&memMap->lock); - - DMA_MAP_PRINT("memMap: %p\n", memMap); - - if (memMap->inUse) { - printk(KERN_ERR "%s: memory map %p is already being used\n", - __func__, memMap); - rc = -EBUSY; - goto out; - } - - memMap->inUse = 1; - memMap->dir = dir; - memMap->numRegionsUsed = 0; - - rc = 0; - -out: - - DMA_MAP_PRINT("returning %d", rc); - - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_map_start); - -/****************************************************************************/ -/** -* Adds a segment of memory to a memory map. Each segment is both -* physically and virtually contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */ - DMA_Region_t *region, /* Region that the segment belongs to */ - void *virtAddr, /* Virtual address of the segment being added */ - dma_addr_t physAddr, /* Physical address of the segment being added */ - size_t numBytes /* Number of bytes of the segment being added */ - ) { - DMA_Segment_t *segment; - - DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr, - physAddr, numBytes); - - /* Sanity check */ - - if (((unsigned long)virtAddr < (unsigned long)region->virtAddr) - || (((unsigned long)virtAddr + numBytes)) > - ((unsigned long)region->virtAddr + region->numBytes)) { - printk(KERN_ERR - "%s: virtAddr %p is outside region @ %p len: %d\n", - __func__, virtAddr, region->virtAddr, region->numBytes); - return -EINVAL; - } - - if (region->numSegmentsUsed > 0) { - /* Check to see if this segment is physically contiguous with the previous one */ - - segment = ®ion->segment[region->numSegmentsUsed - 1]; - - if ((segment->physAddr + segment->numBytes) == physAddr) { - /* It is - just add on to the end */ - - DMA_MAP_PRINT("appending %d bytes to last segment\n", - numBytes); - - segment->numBytes += numBytes; - - return 0; - } - } - - /* Reallocate to hold more segments, if required. */ - - if (region->numSegmentsUsed >= region->numSegmentsAllocated) { - DMA_Segment_t *newSegment; - size_t oldSize = - region->numSegmentsAllocated * sizeof(*newSegment); - int newAlloc = region->numSegmentsAllocated + 4; - size_t newSize = newAlloc * sizeof(*newSegment); - - newSegment = kmalloc(newSize, GFP_KERNEL); - if (newSegment == NULL) { - return -ENOMEM; - } - memcpy(newSegment, region->segment, oldSize); - memset(&((uint8_t *) newSegment)[oldSize], 0, - newSize - oldSize); - kfree(region->segment); - - region->numSegmentsAllocated = newAlloc; - region->segment = newSegment; - } - - segment = ®ion->segment[region->numSegmentsUsed]; - region->numSegmentsUsed++; - - segment->virtAddr = virtAddr; - segment->physAddr = physAddr; - segment->numBytes = numBytes; - - DMA_MAP_PRINT("returning success\n"); - - return 0; -} - -/****************************************************************************/ -/** -* Adds a region of memory to a memory map. Each region is virtually -* contiguous, but not necessarily physically contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes /* Number of bytes being mapped */ - ) { - unsigned long addr = (unsigned long)mem; - unsigned int offset; - int rc = 0; - DMA_Region_t *region; - dma_addr_t physAddr; - - down(&memMap->lock); - - DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes); - - if (!memMap->inUse) { - printk(KERN_ERR "%s: Make sure you call dma_map_start first\n", - __func__); - rc = -EINVAL; - goto out; - } - - /* Reallocate to hold more regions. */ - - if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) { - DMA_Region_t *newRegion; - size_t oldSize = - memMap->numRegionsAllocated * sizeof(*newRegion); - int newAlloc = memMap->numRegionsAllocated + 4; - size_t newSize = newAlloc * sizeof(*newRegion); - - newRegion = kmalloc(newSize, GFP_KERNEL); - if (newRegion == NULL) { - rc = -ENOMEM; - goto out; - } - memcpy(newRegion, memMap->region, oldSize); - memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize); - - kfree(memMap->region); - - memMap->numRegionsAllocated = newAlloc; - memMap->region = newRegion; - } - - region = &memMap->region[memMap->numRegionsUsed]; - memMap->numRegionsUsed++; - - offset = addr & ~PAGE_MASK; - - region->memType = dma_mem_type(mem); - region->virtAddr = mem; - region->numBytes = numBytes; - region->numSegmentsUsed = 0; - region->numLockedPages = 0; - region->lockedPages = NULL; - - switch (region->memType) { - case DMA_MEM_TYPE_VMALLOC: - { - atomic_inc(&gDmaStatMemTypeVmalloc); - - /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */ - - /* vmalloc'd pages are not physically contiguous */ - - rc = -EINVAL; - break; - } - - case DMA_MEM_TYPE_KMALLOC: - { - atomic_inc(&gDmaStatMemTypeKmalloc); - - /* kmalloc'd pages are physically contiguous, so they'll have exactly */ - /* one segment */ - -#if ALLOW_MAP_OF_KMALLOC_MEMORY - physAddr = - dma_map_single(NULL, mem, numBytes, memMap->dir); - rc = dma_map_add_segment(memMap, region, mem, physAddr, - numBytes); -#else - rc = -EINVAL; -#endif - break; - } - - case DMA_MEM_TYPE_DMA: - { - /* dma_alloc_xxx pages are physically contiguous */ - - atomic_inc(&gDmaStatMemTypeCoherent); - - physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset; - - dma_sync_single_for_cpu(NULL, physAddr, numBytes, - memMap->dir); - rc = dma_map_add_segment(memMap, region, mem, physAddr, - numBytes); - break; - } - - case DMA_MEM_TYPE_USER: - { - size_t firstPageOffset; - size_t firstPageSize; - struct page **pages; - struct task_struct *userTask; - - atomic_inc(&gDmaStatMemTypeUser); - -#if 1 - /* If the pages are user pages, then the dma_mem_map_set_user_task function */ - /* must have been previously called. */ - - if (memMap->userTask == NULL) { - printk(KERN_ERR - "%s: must call dma_mem_map_set_user_task when using user-mode memory\n", - __func__); - return -EINVAL; - } - - /* User pages need to be locked. */ - - firstPageOffset = - (unsigned long)region->virtAddr & (PAGE_SIZE - 1); - firstPageSize = PAGE_SIZE - firstPageOffset; - - region->numLockedPages = (firstPageOffset - + region->numBytes + - PAGE_SIZE - 1) / PAGE_SIZE; - pages = - kmalloc(region->numLockedPages * - sizeof(struct page *), GFP_KERNEL); - - if (pages == NULL) { - region->numLockedPages = 0; - return -ENOMEM; - } - - userTask = memMap->userTask; - - down_read(&userTask->mm->mmap_sem); - rc = get_user_pages(userTask, /* task */ - userTask->mm, /* mm */ - (unsigned long)region->virtAddr, /* start */ - region->numLockedPages, /* len */ - memMap->dir == DMA_FROM_DEVICE, /* write */ - 0, /* force */ - pages, /* pages (array of pointers to page) */ - NULL); /* vmas */ - up_read(&userTask->mm->mmap_sem); - - if (rc != region->numLockedPages) { - kfree(pages); - region->numLockedPages = 0; - - if (rc >= 0) { - rc = -EINVAL; - } - } else { - uint8_t *virtAddr = region->virtAddr; - size_t bytesRemaining; - int pageIdx; - - rc = 0; /* Since get_user_pages returns +ve number */ - - region->lockedPages = pages; - - /* We've locked the user pages. Now we need to walk them and figure */ - /* out the physical addresses. */ - - /* The first page may be partial */ - - dma_map_add_segment(memMap, - region, - virtAddr, - PFN_PHYS(page_to_pfn - (pages[0])) + - firstPageOffset, - firstPageSize); - - virtAddr += firstPageSize; - bytesRemaining = - region->numBytes - firstPageSize; - - for (pageIdx = 1; - pageIdx < region->numLockedPages; - pageIdx++) { - size_t bytesThisPage = - (bytesRemaining > - PAGE_SIZE ? PAGE_SIZE : - bytesRemaining); - - DMA_MAP_PRINT - ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n", - pageIdx, pages[pageIdx], - page_to_pfn(pages[pageIdx]), - PFN_PHYS(page_to_pfn - (pages[pageIdx]))); - - dma_map_add_segment(memMap, - region, - virtAddr, - PFN_PHYS(page_to_pfn - (pages - [pageIdx])), - bytesThisPage); - - virtAddr += bytesThisPage; - bytesRemaining -= bytesThisPage; - } - } -#else - printk(KERN_ERR - "%s: User mode pages are not yet supported\n", - __func__); - - /* user pages are not physically contiguous */ - - rc = -EINVAL; -#endif - break; - } - - default: - { - printk(KERN_ERR "%s: Unsupported memory type: %d\n", - __func__, region->memType); - - rc = -EINVAL; - break; - } - } - - if (rc != 0) { - memMap->numRegionsUsed--; - } - -out: - - DMA_MAP_PRINT("returning %d\n", rc); - - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_map_add_segment); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes, /* Number of bytes being mapped */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ) { - int rc; - - rc = dma_map_start(memMap, dir); - if (rc == 0) { - rc = dma_map_add_region(memMap, mem, numBytes); - if (rc < 0) { - /* Since the add fails, this function will fail, and the caller won't */ - /* call unmap, so we need to do it here. */ - - dma_unmap(memMap, 0); - } - } - - return rc; -} - -EXPORT_SYMBOL(dma_map_mem); - -/****************************************************************************/ -/** -* Setup a descriptor ring for a given memory map. -* -* It is assumed that the descriptor ring has already been initialized, and -* this routine will only reallocate a new descriptor ring if the existing -* one is too small. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ - DMA_MemMap_t *memMap, /* Memory map that will be used */ - dma_addr_t devPhysAddr /* Physical address of device */ - ) { - int rc; - int numDescriptors; - DMA_DeviceAttribute_t *devAttr; - DMA_Region_t *region; - DMA_Segment_t *segment; - dma_addr_t srcPhysAddr; - dma_addr_t dstPhysAddr; - int regionIdx; - int segmentIdx; - - devAttr = &DMA_gDeviceAttribute[dev]; - - down(&memMap->lock); - - /* Figure out how many descriptors we need */ - - numDescriptors = 0; - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - if (memMap->dir == DMA_TO_DEVICE) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - } else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = - dma_calculate_descriptor_count(dev, srcPhysAddr, - dstPhysAddr, - segment-> - numBytes); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_calculate_descriptor_count failed: %d\n", - __func__, rc); - goto out; - } - numDescriptors += rc; - } - } - - /* Adjust the size of the ring, if it isn't big enough */ - - if (numDescriptors > devAttr->ring.descriptorsAllocated) { - dma_free_descriptor_ring(&devAttr->ring); - rc = - dma_alloc_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_alloc_descriptor_ring failed: %d\n", - __func__, rc); - goto out; - } - } else { - rc = - dma_init_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_init_descriptor_ring failed: %d\n", - __func__, rc); - goto out; - } - } - - /* Populate the descriptors */ - - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - if (memMap->dir == DMA_TO_DEVICE) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - } else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = - dma_add_descriptors(&devAttr->ring, dev, - srcPhysAddr, dstPhysAddr, - segment->numBytes); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_add_descriptors failed: %d\n", - __func__, rc); - goto out; - } - } - } - - rc = 0; - -out: - - up(&memMap->lock); - return rc; -} - -EXPORT_SYMBOL(dma_map_create_descriptor_ring); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ - int dirtied /* non-zero if any of the pages were modified */ - ) { - - int rc = 0; - int regionIdx; - int segmentIdx; - DMA_Region_t *region; - DMA_Segment_t *segment; - - down(&memMap->lock); - - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - switch (region->memType) { - case DMA_MEM_TYPE_VMALLOC: - { - printk(KERN_ERR - "%s: vmalloc'd pages are not yet supported\n", - __func__); - rc = -EINVAL; - goto out; - } - - case DMA_MEM_TYPE_KMALLOC: - { -#if ALLOW_MAP_OF_KMALLOC_MEMORY - dma_unmap_single(NULL, - segment->physAddr, - segment->numBytes, - memMap->dir); -#endif - break; - } - - case DMA_MEM_TYPE_DMA: - { - dma_sync_single_for_cpu(NULL, - segment-> - physAddr, - segment-> - numBytes, - memMap->dir); - break; - } - - case DMA_MEM_TYPE_USER: - { - /* Nothing to do here. */ - - break; - } - - default: - { - printk(KERN_ERR - "%s: Unsupported memory type: %d\n", - __func__, region->memType); - rc = -EINVAL; - goto out; - } - } - - segment->virtAddr = NULL; - segment->physAddr = 0; - segment->numBytes = 0; - } - - if (region->numLockedPages > 0) { - int pageIdx; - - /* Some user pages were locked. We need to go and unlock them now. */ - - for (pageIdx = 0; pageIdx < region->numLockedPages; - pageIdx++) { - struct page *page = - region->lockedPages[pageIdx]; - - if (memMap->dir == DMA_FROM_DEVICE) { - SetPageDirty(page); - } - page_cache_release(page); - } - kfree(region->lockedPages); - region->numLockedPages = 0; - region->lockedPages = NULL; - } - - region->memType = DMA_MEM_TYPE_NONE; - region->virtAddr = NULL; - region->numBytes = 0; - region->numSegmentsUsed = 0; - } - memMap->userTask = NULL; - memMap->numRegionsUsed = 0; - memMap->inUse = 0; - -out: - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_unmap); diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 1f2c5319c056..72543781207b 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -26,15 +26,9 @@ /* ---- Include Files ---------------------------------------------------- */ #include <linux/kernel.h> -#include <linux/wait.h> #include <linux/semaphore.h> #include <csp/dmacHw.h> #include <mach/timer.h> -#include <linux/scatterlist.h> -#include <linux/dma-mapping.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> -#include <linux/pagemap.h> /* ---- Constants and Types ---------------------------------------------- */ @@ -113,78 +107,6 @@ typedef struct { /**************************************************************************** * -* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup -* DMA chains from a variety of memory sources. -* -*****************************************************************************/ - -#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */ - /* off not being DMA'd. */ - -typedef enum { - DMA_MEM_TYPE_NONE, /* Not a valid setting */ - DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */ - DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */ - DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */ - DMA_MEM_TYPE_USER, /* Memory came from user space. */ - -} DMA_MemType_t; - -/* A segment represents a physically and virtually contiguous chunk of memory. */ -/* i.e. each segment can be DMA'd */ -/* A user of the DMA code will add memory regions. Each region may need to be */ -/* represented by one or more segments. */ - -typedef struct { - void *virtAddr; /* Virtual address used for this segment */ - dma_addr_t physAddr; /* Physical address this segment maps to */ - size_t numBytes; /* Size of the segment, in bytes */ - -} DMA_Segment_t; - -/* A region represents a virtually contiguous chunk of memory, which may be */ -/* made up of multiple segments. */ - -typedef struct { - DMA_MemType_t memType; - void *virtAddr; - size_t numBytes; - - /* Each region (virtually contiguous) consists of one or more segments. Each */ - /* segment is virtually and physically contiguous. */ - - int numSegmentsUsed; - int numSegmentsAllocated; - DMA_Segment_t *segment; - - /* When a region corresponds to user memory, we need to lock all of the pages */ - /* down before we can figure out the physical addresses. The lockedPage array contains */ - /* the pages that were locked, and which subsequently need to be unlocked once the */ - /* memory is unmapped. */ - - unsigned numLockedPages; - struct page **lockedPages; - -} DMA_Region_t; - -typedef struct { - int inUse; /* Is this mapping currently being used? */ - struct semaphore lock; /* Acquired when using this structure */ - enum dma_data_direction dir; /* Direction this transfer is intended for */ - - /* In the event that we're mapping user memory, we need to know which task */ - /* the memory is for, so that we can obtain the correct mm locks. */ - - struct task_struct *userTask; - - int numRegionsUsed; - int numRegionsAllocated; - DMA_Region_t *region; - -} DMA_MemMap_t; - -/**************************************************************************** -* * The DMA_DeviceAttribute_t contains information which describes a * particular DMA device (or peripheral). * @@ -570,124 +492,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */ /****************************************************************************/ /** -* Initializes a DMA_MemMap_t data structure -*/ -/****************************************************************************/ - -int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ - ); - -/****************************************************************************/ -/** -* Releases any memory currently being held by a memory mapping structure. -*/ -/****************************************************************************/ - -int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ - ); - -/****************************************************************************/ -/** -* Looks at a memory address and categorizes it. -* -* @return One of the values from the DMA_MemType_t enumeration. -*/ -/****************************************************************************/ - -DMA_MemType_t dma_mem_type(void *addr); - -/****************************************************************************/ -/** -* Sets the process (aka userTask) associated with a mem map. This is -* required if user-mode segments will be added to the mapping. -*/ -/****************************************************************************/ - -static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap, - struct task_struct *task) -{ - memMap->userTask = task; -} - -/****************************************************************************/ -/** -* Looks at a memory address and determines if we support DMA'ing to/from -* that type of memory. -* -* @return boolean - -* return value != 0 means dma supported -* return value == 0 means dma not supported -*/ -/****************************************************************************/ - -int dma_mem_supports_dma(void *addr); - -/****************************************************************************/ -/** -* Initializes a memory map for use. Since this function acquires a -* sempaphore within the memory map, it is VERY important that dma_unmap -* be called when you're finished using the map. -*/ -/****************************************************************************/ - -int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ); - -/****************************************************************************/ -/** -* Adds a segment of memory to a memory map. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes /* Number of bytes being mapped */ - ); - -/****************************************************************************/ -/** -* Creates a descriptor ring from a memory mapping. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ - DMA_MemMap_t *memMap, /* Memory map that will be used */ - dma_addr_t devPhysAddr /* Physical address of device */ - ); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *addr, /* Virtual address that we want to get a map of */ - size_t count, /* Number of bytes being mapped */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ - int dirtied /* non-zero if any of the pages were modified */ - ); - -/****************************************************************************/ -/** * Initiates a transfer when the descriptors have already been setup. * * This is a special case, and normally, the dma_transfer_xxx functions should diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6b22b543a83f..d5088900af6c 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -44,7 +44,7 @@ #include <mach/aemif.h> #include <mach/spi.h> -#define DA850_EVM_PHY_ID "0:00" +#define DA850_EVM_PHY_ID "davinci_mdio-0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 346e1de2f5a8..849311d3cb7c 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -54,7 +54,7 @@ static inline int have_tvp7002(void) return 0; } -#define DM365_EVM_PHY_ID "0:01" +#define DM365_EVM_PHY_ID "davinci_mdio-0:01" /* * A MAX-II CPLD is used for various board control functions. */ diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index a64b49cfedca..1247ecdcf752 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -40,7 +40,7 @@ #include <mach/usb.h> #include <mach/aemif.h> -#define DM644X_EVM_PHY_ID "0:01" +#define DM644X_EVM_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 64017558860b..872ac69fa049 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; -#define DM646X_EVM_PHY_ID "0:01" +#define DM646X_EVM_PHY_ID "davinci_mdio-0:01" /* * The following EDMA channels/slots are not being used by drivers (for * example: Timer, GPIO, UART events etc) on dm646x, hence they are being diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 6c4a16415d47..8d34f513d415 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -39,7 +39,7 @@ #include <mach/mmc.h> #include <mach/usb.h> -#define NEUROS_OSD2_PHY_ID "0:01" +#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index e7c0c7c53493..45e815760a27 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -21,7 +21,7 @@ #include <mach/da8xx.h> #include <mach/mux.h> -#define HAWKBOARD_PHY_ID "0:07" +#define HAWKBOARD_PHY_ID "davinci_mdio-0:07" #define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) #define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 0b136a831c59..31da3c5b2ba3 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -42,7 +42,7 @@ #include <mach/mux.h> #include <mach/usb.h> -#define SFFSDR_PHY_ID "0:01" +#define SFFSDR_PHY_ID "davinci_mdio-0:01" static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 * UBL: Block 1 diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 0ed7fdb64efb..992c4c410185 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = { .div_reg = PLLDIV3, }; -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk7 = { - .name = "pll1_sysclk7", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - static struct clk i2c0_clk = { .name = "i2c0", .parent = &pll0_aux_clk, @@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "pll1_aux", &pll1_aux_clk), CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), CLK("i2c_davinci.1", NULL, &i2c0_clk), CLK(NULL, "timer0", &timerp64_0_clk), CLK("watchdog", NULL, &timerp64_1_clk), diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index dd1429ae6405..bda7aca04ca0 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -28,6 +28,7 @@ #include <asm/mach/arch.h> #include <linux/irq.h> #include <plat/time.h> +#include <plat/ehci-orion.h> #include <plat/common.h> #include <plat/addr-map.h> #include "common.h" @@ -71,7 +72,7 @@ void __init dove_map_io(void) ****************************************************************************/ void __init dove_ehci0_init(void) { - orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); + orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA); } /***************************************************************************** diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 03dd4012043e..d5fb44f16d31 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -32,6 +32,7 @@ #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -153,7 +154,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = { }, { I2C_BOARD_INFO("pca9539", 0x74), .platform_data = &pca953x_74_gpio_data, - .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)), }, { I2C_BOARD_INFO("pca9539", 0x75), .platform_data = &pca953x_75_gpio_data, @@ -348,6 +348,8 @@ static void __init vision_init_machine(void) "pca9539:74")) pr_warn("cannot request interrupt gpio for pca9539:74\n"); + vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); + ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index a5823a7f249e..13312ccb2d93 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -32,6 +32,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_LCD1), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), }; +#endif static struct clksrc_clk *sysclks[] = { /* nothing here yet */ diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 26a668b0d101..48af28566fa1 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -32,12 +32,14 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKDIV_IMAGE), SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), }; +#endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 5a8c42e90005..187287aa57ab 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -30,6 +30,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), @@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), }; +#endif struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 85fa02767d67..e6b02fdf1b09 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -15,11 +15,13 @@ #include <linux/serial_core.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <mach/map.h> #include <plat/cpu.h> #include <plat/regs-serial.h> -#include <plat/exynos4.h> + +#include "common.h" /* * The following lookup table is used to override device names when devices @@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { static void __init exynos4210_dt_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); } @@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ .init_irq = exynos4_init_irq, .map_io = exynos4210_dt_map_io, + .handle_irq = gic_handle_irq, .init_machine = exynos4210_dt_machine_init, .timer = &exynos4_timer, .dt_compat = exynos4210_dt_compat, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b895ec031105..435261f83f46 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = { .lower_margin = 1, .hsync_len = 48, .vsync_len = 3, - .xres = 1280, - .yres = 800, + .xres = 1024, + .yres = 600, .refresh = 60, }, .max_bpp = 24, .default_bpp = 16, - .virtual_x = 1280, - .virtual_y = 800, + .virtual_x = 1024, + .virtual_y = 2 * 600, }; static struct s3c_fb_platdata nuri_fb_pdata __initdata = { diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 37ac93e8d6d9..0fc65ffde8ff 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -910,7 +910,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .bus_type = FIMC_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, - .clk_frequency = 21600000UL, + .clk_frequency = 24000000UL, .csi_data_align = 32, }, }; diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index a4f61a43c7ba..e19013051772 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -206,7 +206,7 @@ static void exynos4_pm_prepare(void) } -static int exynos4_pm_add(struct device *dev) +static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = exynos4_pm_prepare; pm_cpu_sleep = exynos4_cpu_suspend; @@ -384,7 +384,9 @@ static void exynos4_pm_resume(void) exynos4_restore_pll(); +#ifdef CONFIG_SMP scu_enable(S5P_VA_SCU); +#endif #ifdef CONFIG_CACHE_L2X0 s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index cc15426787b1..77d4852e19f2 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -27,6 +27,7 @@ #include <plat/cache-feroceon-l2.h> #include <plat/mvsdio.h> #include <plat/orion_nand.h> +#include <plat/ehci-orion.h> #include <plat/common.h> #include <plat/time.h> #include <plat/addr-map.h> @@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; void __init kirkwood_ehci_init(void) { kirkwood_clk_ctrl |= CGC_USB0; - orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB); + orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); } diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index e8fda45c0736..d5a0d1da2e0e 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -31,314 +31,314 @@ #define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) #define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 ) +#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 ) #define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 ) #define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 ) -#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 ) #define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) #define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 ) #define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 ) #define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 ) -#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 ) #define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 ) #define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 ) -#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 ) -#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) #define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 ) -#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP_MAX 49 diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0cdd41004ad0..a5dcf766a3f9 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -19,6 +19,7 @@ #include <mach/mv78xx0.h> #include <mach/bridge-regs.h> #include <plat/cache-feroceon-l2.h> +#include <plat/ehci-orion.h> #include <plat/orion_nand.h> #include <plat/time.h> #include <plat/common.h> @@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void) ****************************************************************************/ void __init mv78xx0_ehci0_init(void) { - orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); + orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); } diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h index b61b50927123..3752302ae2ee 100644 --- a/arch/arm/mach-mv78xx0/mpp.h +++ b/arch/arm/mach-mv78xx0/mpp.h @@ -24,296 +24,296 @@ #define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) #define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) -#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1) -#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1) +#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1) +#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1) #define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) #define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) -#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1) -#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1) +#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1) +#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1) #define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) #define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) -#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1) -#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1) +#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1) +#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1) #define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) #define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) -#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1) -#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1) +#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1) +#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1) #define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) #define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) -#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1) -#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1) +#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1) +#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1) #define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) #define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) -#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1) -#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1) +#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1) +#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1) #define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) #define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) -#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1) -#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1) +#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1) +#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1) #define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) #define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) -#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1) -#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1) +#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1) +#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1) #define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) #define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) -#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1) -#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1) +#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1) +#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1) #define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) #define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) -#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1) -#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1) +#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1) +#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1) #define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) -#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1) -#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1) +#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1) +#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1) #define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) #define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) -#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1) -#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1) +#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1) +#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1) #define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) #define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) -#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1) -#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1) -#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1) -#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1) +#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1) +#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1) +#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1) +#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1) #define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) #define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) -#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1) -#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1) -#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1) -#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1) +#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1) +#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1) +#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1) +#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1) #define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) #define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) -#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1) -#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1) -#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1) -#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1) +#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1) +#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1) +#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1) +#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1) #define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) #define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) -#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1) -#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1) -#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1) -#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1) +#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1) +#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1) +#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1) +#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1) #define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) #define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) -#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1) -#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1) -#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1) -#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1) +#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1) +#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1) +#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1) +#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1) #define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) #define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) -#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1) -#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1) -#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1) -#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1) +#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1) +#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1) +#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1) +#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1) #define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) #define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) -#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1) -#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1) +#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1) +#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1) #define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) #define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) -#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1) -#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1) +#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1) +#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1) #define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) #define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) -#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1) -#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0) +#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1) +#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0) #define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) #define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) -#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1) -#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0) +#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1) +#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0) #define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) #define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) -#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1) -#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1) -#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1) +#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1) +#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1) +#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1) #define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) #define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) -#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1) -#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1) -#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1) +#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1) +#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1) +#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1) #define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) #define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) -#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1) -#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1) +#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1) +#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1) #define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) #define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) -#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1) -#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1) +#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1) +#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1) #define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) #define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) -#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1) -#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1) +#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1) +#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1) #define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) #define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) -#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1) -#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1) +#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1) +#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1) #define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) #define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) -#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1) -#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1) +#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1) +#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1) #define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) #define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) -#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1) -#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1) -#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1) +#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1) +#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1) +#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1) #define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) #define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) -#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1) +#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1) #define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) #define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) -#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1) -#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1) +#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1) +#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1) #define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) #define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) -#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1) -#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1) -#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1) +#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1) +#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1) +#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1) #define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) #define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) -#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1) -#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1) +#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1) +#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1) #define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) #define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) -#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1) -#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1) +#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1) +#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1) #define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) #define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) -#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1) -#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1) +#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1) +#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1) #define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) #define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) -#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1) -#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1) -#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1) +#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1) +#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1) +#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1) #define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) #define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) -#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1) -#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1) -#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1) -#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1) +#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1) +#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1) +#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1) +#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1) #define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) #define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) -#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1) -#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1) -#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1) -#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1) +#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1) +#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1) +#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1) +#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1) #define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) #define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) -#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1) -#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1) -#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1) -#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1) +#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1) +#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1) +#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1) +#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1) #define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) #define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) -#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1) +#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1) #define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) #define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) -#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1) +#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1) #define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) #define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) -#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1) +#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1) #define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) #define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) -#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1) +#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1) #define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) #define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) -#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1) +#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1) #define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) #define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) -#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1) -#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1) +#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1) +#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1) #define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) #define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) -#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1) +#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1) #define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) @@ -323,14 +323,14 @@ #define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) -#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1) +#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1) #define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) #define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) -#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1) -#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1) +#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1) +#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1) #define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 41e6612ecbaf..d965da45160e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -213,13 +213,12 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y - select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" @@ -265,7 +264,7 @@ config MACH_OMAP_ZOOM2 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -275,7 +274,7 @@ config MACH_OMAP_ZOOM3 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -334,7 +333,7 @@ config MACH_OMAP_4430SDP depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP4_PANDA bool "OMAP4 Panda Board" @@ -342,7 +341,7 @@ config MACH_OMAP4_PANDA depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config OMAP3_EMU bool "OMAP3 debugging peripherals" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fc9b238cbc19..bd76394ccaf8 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -11,9 +11,9 @@ hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ clkt_dpll.o clkt_clksel.o -secure-common = omap-smc.o omap-secure.o +secure-common = omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 39fba9df17fb..4e9071589bfb 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -52,8 +52,9 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -603,8 +604,9 @@ static void __init omap_sfh7741prox_init(void) } static struct gpio sdp4430_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -621,8 +623,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); } static struct nokia_dsi_panel_data dsi1_panel = { @@ -738,6 +739,10 @@ static void sdp4430_lcd_init(void) pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); } +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -745,6 +750,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, }; static struct picodlp_panel_data sdp4430_picodlp_pdata = { @@ -808,7 +814,7 @@ static struct omap_dss_board_info sdp4430_dss_data = { .default_device = &sdp4430_lcd_device, }; -static void omap_4430sdp_display_init(void) +static void __init omap_4430sdp_display_init(void) { int r; @@ -829,6 +835,10 @@ static void omap_4430sdp_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } #ifdef CONFIG_OMAP_MUX @@ -841,7 +851,7 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -static void omap4_sdp4430_wifi_mux_init(void) +static void __init omap4_sdp4430_wifi_mux_init(void) { omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE); @@ -868,12 +878,17 @@ static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { .board_tcxo_clock = WL12XX_TCXOCLOCK_26, }; -static void omap4_sdp4430_wifi_init(void) +static void __init omap4_sdp4430_wifi_init(void) { + int ret; + omap4_sdp4430_wifi_mux_init(); - if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data)) - pr_err("Error setting wl12xx data\n"); - platform_device_register(&omap_vwlan_device); + ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data); + if (ret) + pr_err("Error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap_vwlan_device); + if (ret) + pr_err("Error registering wl12xx device: %d\n", ret); } static void __init omap_4430sdp_init(void) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e921e3be24a4..d73316ed4207 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -437,7 +437,7 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; -static void cm_t35_init_usbh(void) +static void __init cm_t35_init_usbh(void) { int err; diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index d58756060483..ad497620539b 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -17,6 +17,7 @@ #include <linux/i2c/twl.h> #include <mach/hardware.h> +#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <plat/board.h> @@ -102,6 +103,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, @@ -141,6 +143,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, @@ -160,6 +163,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 003fe34c9343..c775bead1497 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -617,6 +617,21 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, }; +static void __init omap3_evm_wl12xx_init(void) +{ +#ifdef CONFIG_WL12XX_PLATFORM_DATA + int ret; + + /* WL12xx WLAN Init */ + ret = wl12xx_set_platform_data(&omap3evm_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap3evm_wlan_regulator); + if (ret) + pr_err("error registering wl12xx device: %d\n", ret); +#endif +} + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -665,13 +680,7 @@ static void __init omap3_evm_init(void) omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); - -#ifdef CONFIG_WL12XX_PLATFORM_DATA - /* WL12xx WLAN Init */ - if (wl12xx_set_platform_data(&omap3evm_wlan_data)) - pr_err("error setting wl12xx data\n"); - platform_device_register(&omap3evm_wlan_regulator); -#endif + omap3_evm_wl12xx_init(); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 30ad40db2cf3..28fc271f7031 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -51,8 +51,9 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -413,8 +414,9 @@ int __init omap4_panda_dvi_init(void) } static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -431,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -442,6 +447,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { @@ -473,18 +479,24 @@ void omap4_panda_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; + int ret; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); - if (wl12xx_set_platform_data(&omap_panda_wlan_data)) - pr_err("error setting wl12xx data\n"); + ret = wl12xx_set_platform_data(&omap_panda_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8d7ce11cfeaf..c126461836ac 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -296,8 +296,10 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { - if (wl12xx_set_platform_data(&omap_zoom_wlan_data)) - pr_err("error setting wl12xx data\n"); + int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); + + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap_i2c_init(); platform_device_register(&omap_vwlan_device); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 0b510ad01a00..283d11eae693 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) break; default: pr_err("Invalid McSPI Revision value\n"); + kfree(pdata); return -EINVAL; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 3c446d1a1781..3677b1f58b85 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -103,12 +103,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) u32 reg; u16 control_i2c_1; - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 130034bf01d5..dfffbbf4c009 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval) case GPMC_CONFIG_DEV_SIZE: regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* clear 2 target bits */ + regval &= ~GPMC_CONFIG1_DEVICESIZE(3); + + /* set the proper value */ regval |= GPMC_CONFIG1_DEVICESIZE(wval); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); break; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index bd844af13af5..b40c28895298 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -175,14 +175,15 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) { u32 reg; - if (mmc->slots[0].internal_clock) { - reg = omap_ctrl_readl(control_devconf1_offset); + reg = omap_ctrl_readl(control_devconf1_offset); + if (mmc->slots[0].internal_clock) reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } + else + reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); } -static void hsmmc23_before_set_reg(struct device *dev, int slot, +static void hsmmc2_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { struct omap_mmc_platform_data *mmc = dev->platform_data; @@ -292,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) +static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) { char *hc_name; @@ -407,14 +408,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; } - /* FALLTHROUGH */ - case 3: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; + mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; mmc->slots[0].after_set_reg = NULL; } break; + case 3: case 4: case 5: mmc->slots[0].before_set_reg = NULL; @@ -430,7 +430,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -487,7 +487,7 @@ done: kfree(mmc_data); } -void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3f174d51f67f..eb50c29fb644 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -388,7 +388,7 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } -#ifdef CONFIG_ARCH_OMAP2 +#ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { omap2_set_globals_242x(); @@ -400,7 +400,9 @@ void __init omap2420_init_early(void) omap_hwmod_init_postsetup(); omap2420_clk_init(); } +#endif +#ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { omap2_set_globals_243x(); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index e1cc75d1a57a..fb8bc9fa43b1 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition, static char *omap_mux_options; -static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, - int gpio, int val) +static int _omap_mux_init_gpio(struct omap_mux_partition *partition, + int gpio, int val) { struct omap_mux_entry *e; struct omap_mux *gpio_mux = NULL; @@ -145,7 +145,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, return 0; } -int __init omap_mux_init_gpio(int gpio, int val) +int omap_mux_init_gpio(int gpio, int val) { struct omap_mux_partition *partition; int ret; @@ -159,9 +159,9 @@ int __init omap_mux_init_gpio(int gpio, int val) return -ENODEV; } -static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, - const char *muxname, - struct omap_mux **found_mux) +static int _omap_mux_get_by_name(struct omap_mux_partition *partition, + const char *muxname, + struct omap_mux **found_mux) { struct omap_mux *mux = NULL; struct omap_mux_entry *e; @@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname, return -ENODEV; } -int __init omap_mux_init_signal(const char *muxname, int val) +int omap_mux_init_signal(const char *muxname, int val) { struct omap_mux_partition *partition = NULL; struct omap_mux *mux = NULL; @@ -1094,8 +1094,8 @@ static void omap_mux_init_package(struct omap_mux *superset, omap_mux_package_init_balls(package_balls, superset); } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { omap_mux_set_cmdline_signals(); omap_mux_write_array(partition, board_mux); @@ -1109,8 +1109,8 @@ static void omap_mux_init_package(struct omap_mux *superset, { } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { } diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index b13ef7ef5ef4..503ac777a2ba 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -18,6 +18,7 @@ #include <linux/linkage.h> #include <linux/init.h> + __CPUINIT /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5192cabb40ed..eba6cd3816f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1517,8 +1517,8 @@ static int _enable(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED && oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_DISABLED) { - WARN(1, "omap_hwmod: %s: enabled state can only be entered " - "from initialized, idle, or disabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n", + oh->name); return -EINVAL; } @@ -1600,8 +1600,8 @@ static int _idle(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: idle state can only be entered from " - "enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n", + oh->name); return -EINVAL; } @@ -1682,8 +1682,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: disabled state can only be entered " - "from idle, or enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n", + oh->name); return -EINVAL; } @@ -2240,8 +2240,8 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) BUG_ON(!oh); if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { - WARN(1, "omap_device: %s: OCP barrier impossible due to " - "device configuration\n", oh->name); + WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n", + oh->name); return; } diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c11273da5dcc..f08e442af397 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -56,27 +56,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = { }; /* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -struct omap_hwmod_class omap2_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap2_dispc_sysc, -}; - -/* * 'rfbi' class * remote frame buffer interface */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 177dee20faef..2a6729741b06 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .dma_req = -1 } }; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2_dispc_sysc, +}; + /* OMAP2xxx Timer Common */ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .rev_offs = 0x0000, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5324e8d93bc0..3c8dd928628e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1480,6 +1480,28 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), }; +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSC_HAS_ENAWAKEUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap3_dispc_sysc, +}; + /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { .master = &omap3xxx_l4_core_hwmod, @@ -1503,7 +1525,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap2_dispc_hwmod_class, + .class = &omap3_dispc_hwmod_class, .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_alwon_fck", .prcm = { @@ -3523,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, - /* dss class */ - &omap3xxx_dss_dispc_hwmod, - &omap3xxx_dss_dsi1_hwmod, - &omap3xxx_dss_rfbi_hwmod, - &omap3xxx_dss_venc_hwmod, - /* i2c class */ &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, @@ -3635,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { NULL }; +static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = { + /* dss class */ + &omap3xxx_dss_dispc_hwmod, + &omap3xxx_dss_dsi1_hwmod, + &omap3xxx_dss_rfbi_hwmod, + &omap3xxx_dss_venc_hwmod, + NULL +}; + int __init omap3xxx_hwmod_init(void) { int r; @@ -3708,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void) if (h) r = omap_hwmod_register(h); + if (r < 0) + return r; + + /* + * DSS code presumes that dss_core hwmod is handled first, + * _before_ any other DSS related hwmods so register common + * DSS hwmods last to ensure that dss_core is already registered. + * Otherwise some change things may happen, for ex. if dispc + * is handled before dss_core and DSS is enabled in bootloader + * DIPSC will be reset with outputs enabled which sometimes leads + * to unrecoverable L3 error. + * XXX The long-term fix to this is to ensure modules are set up + * in dependency order in the hwmod core code. + */ + r = omap_hwmod_register(omap3xxx_dss_hwmods); return r; } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f9f151081760..ef0524c10a84 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { { + .name = "mpu", .pa_start = 0x4012e000, .pa_end = 0x4012e07f, .flags = ADDR_TYPE_RT @@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { { + .name = "dma", .pa_start = 0x4902e000, .pa_end = 0x4902e07f, .flags = ADDR_TYPE_RT diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b8822f8b2891..23de98d03841 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -82,13 +82,7 @@ static int omap2_fclks_active(void) f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - /* Ignore UART clocks. These are handled by UART core (serial.c) */ - f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK); - f2 &= ~OMAP24XX_EN_UART3_MASK; - - if (f1 | f2) - return 1; - return 0; + return (f1 | f2) ? 1 : 0; } static void omap2_enter_full_retention(void) diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index c1c4d86a79a8..9ce765407ad5 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -19,6 +19,7 @@ #include "common.h" #include <plat/cpu.h> #include <plat/prcm.h> +#include <plat/irqs.h> #include "vp.h" diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 33dd655e6aab..a1d6154dc120 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -19,6 +19,7 @@ #include "common.h" #include <plat/cpu.h> +#include <plat/irqs.h> #include <plat/prcm.h> #include "vp.h" diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 247d89478f24..f590afc1f673 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -107,18 +107,18 @@ static void omap_uart_set_noidle(struct platform_device *pdev) omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_forceidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE); + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); } #else static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) {} static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_forceidle(struct platform_device *pdev) {} +static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -349,7 +349,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_forceidle; + omap_up.set_forceidle = omap_uart_set_smartidle; omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 9dd93453e563..7e755bb0ffc4 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - return ret; + goto err_iounmap; } } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 6eeff0e0ae01..5c9acea95761 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(clksrc.io_base, 1); + return __omap_dm_timer_read_counter(&clksrc, 1); return 0; } diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 031d116fbf10..175b7d86d86a 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -247,7 +247,7 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) * omap_vc_i2c_init - initialize I2C interface to PMIC * @voltdm: voltage domain containing VC data * - * Use PMIC supplied seetings for I2C high-speed mode and + * Use PMIC supplied settings for I2C high-speed mode and * master code (if set) and program the VC I2C configuration * register. * @@ -265,8 +265,8 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for all channels must match.", - __func__); + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + __func__, voltdm->name, i2c_high_speed); return; } @@ -292,9 +292,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) u32 val; if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, voltdm->name); + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); return; } diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f5e383..57db2038b23c 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP if (cpu_is_omap3630()) { omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; @@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } +#endif if (cpu_is_omap3517() || cpu_is_omap3505()) voltdms = voltagedomains_am35xx; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d022595d..c3115f6853d4 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; +#endif for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 807391d84a9d..0df88820978d 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -41,6 +41,11 @@ void __init omap_vp_init(struct voltagedomain *voltdm) u32 val, sys_clk_rate, timeout, waittime; u32 vddmin, vddmax, vstepmin, vstepmax; + if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); + return; + } + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0e28bae20bd4..5dad38ec00ea 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -29,6 +29,7 @@ #include <mach/hardware.h> #include <mach/orion5x.h> #include <plat/orion_nand.h> +#include <plat/ehci-orion.h> #include <plat/time.h> #include <plat/common.h> #include <plat/addr-map.h> @@ -72,7 +73,8 @@ void __init orion5x_map_io(void) ****************************************************************************/ void __init orion5x_ehci0_init(void) { - orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); + orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL, + EHCI_PHY_ORION); } diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c index 7dc6c46b5e2b..5404535da1a5 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c2410/cpu-freq.c @@ -115,7 +115,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2410_cpufreq_add(struct device *dev) +static int s3c2410_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { return s3c_cpufreq_register(&s3c2410_cpufreq_info); } @@ -133,7 +134,8 @@ static int __init s3c2410_cpufreq_init(void) arch_initcall(s3c2410_cpufreq_init); -static int s3c2410a_cpufreq_add(struct device *dev) +static int s3c2410a_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { /* alter the maximum freq settings for S3C2410A. If a board knows * it only has a maximum of 200, then it should register its own @@ -144,7 +146,7 @@ static int s3c2410a_cpufreq_add(struct device *dev) s3c2410_cpufreq_info.max.pclk = 66500000; s3c2410_cpufreq_info.name = "s3c2410a"; - return s3c2410_cpufreq_add(dev); + return s3c2410_cpufreq_add(dev, sif); } static struct subsys_interface s3c2410a_cpufreq_interface = { diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 2afd00014a77..4803338cf56e 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -132,7 +132,8 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { }, }; -static int __init s3c2410_dma_add(struct device *dev) +static int __init s3c2410_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2410_dma_order); @@ -148,7 +149,7 @@ static struct subsys_interface s3c2410_dma_interface = { static int __init s3c2410_dma_drvinit(void) { - return subsys_interface_register(&s3c2410_interface); + return subsys_interface_register(&s3c2410_dma_interface); } arch_initcall(s3c2410_dma_drvinit); diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c index c07438bfc99f..e0b3b347da82 100644 --- a/arch/arm/mach-s3c2410/pll.c +++ b/arch/arm/mach-s3c2410/pll.c @@ -66,7 +66,7 @@ static struct cpufreq_frequency_table pll_vals_12MHz[] = { { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, }; -static int s3c2410_plls_add(struct device *dev) +static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) { return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); } diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index fda5385deff6..03f706dd6009 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -111,7 +111,7 @@ struct syscore_ops s3c2410_pm_syscore_ops = { .resume = s3c2410_pm_resume, }; -static int s3c2410_pm_add(struct device *dev) +static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2410_pm_prepare; pm_cpu_sleep = s3c2410_cpu_suspend; diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c index d8664b7652ce..125be7d5fa60 100644 --- a/arch/arm/mach-s3c2412/cpu-freq.c +++ b/arch/arm/mach-s3c2412/cpu-freq.c @@ -194,7 +194,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), }; -static int s3c2412_cpufreq_add(struct device *dev) +static int s3c2412_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { unsigned long fclk_rate; diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 142acd3b5e15..38472ac920ff 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -159,7 +159,8 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { .map_size = ARRAY_SIZE(s3c2412_dma_mappings), }; -static int __init s3c2412_dma_add(struct device *dev) +static int __init s3c2412_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); return s3c24xx_dma_init_map(&s3c2412_dma_sel); diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index a8a46c1644f4..e65619ddbccc 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -170,7 +170,7 @@ static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) static struct irq_chip s3c2412_irq_rtc_chip; -static int s3c2412_irq_add(struct device *dev) +static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index d1adfa65f66d..d04588506ec4 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -56,7 +56,7 @@ static void s3c2412_pm_prepare(void) { } -static int s3c2412_pm_add(struct device *dev) +static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2412_pm_prepare; pm_cpu_sleep = s3c2412_cpu_suspend; diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 36df761061de..fd49f35e448e 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -213,7 +213,8 @@ static int __init s3c2416_add_sub(unsigned int base, return 0; } -static int __init s3c2416_irq_add(struct device *dev) +static int __init s3c2416_irq_add(struct device *dev, + struct subsys_interface *sif) { printk(KERN_INFO "S3C2416: IRQ Support\n"); diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 3bdb15a0d419..1bd4817b8eb8 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -48,7 +48,7 @@ static void s3c2416_pm_prepare(void) __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); } -static int s3c2416_pm_add(struct device *dev) +static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2416_pm_prepare; pm_cpu_sleep = s3c2416_cpu_suspend; diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index bedbc87a3426..414364eb426c 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -149,7 +149,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), }; -static int s3c2440_clk_add(struct device *dev) +static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 15b1ddf8f626..5f0a0c8ef84f 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -174,7 +174,8 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { }, }; -static int __init s3c2440_dma_add(struct device *dev) +static int __init s3c2440_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2440_dma_order); diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index 4fee9bc6bcb5..4a18cde439cc 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -92,7 +92,7 @@ static struct irq_chip s3c_irq_wdtac97 = { .irq_ack = s3c_irq_wdtac97_ack, }; -static int s3c2440_irq_add(struct device *dev) +static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c index cf7596694efe..61776764d9f4 100644 --- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c +++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c @@ -270,7 +270,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2440_cpufreq_add(struct device *dev) +static int s3c2440_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { xtal = s3c_cpufreq_clk_get(NULL, "xtal"); hclk = s3c_cpufreq_clk_get(NULL, "hclk"); diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c index b5368ae8d7fe..551fb433be87 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c @@ -51,7 +51,7 @@ static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ }; -static int s3c2440_plls12_add(struct device *dev) +static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif) { struct clk *xtal_clk; unsigned long xtal; diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c index 42f2b5cd2399..3f15bcf64290 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c @@ -79,7 +79,8 @@ static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ }; -static int s3c2440_plls169344_add(struct device *dev) +static int s3c2440_plls169344_add(struct device *dev, + struct subsys_interface *sif) { struct clk *xtal_clk; unsigned long xtal; diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 8004e0497bf4..22cb7c94a8c8 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -122,7 +122,7 @@ static struct clk s3c2442_clk_cam_upll = { }, }; -static int s3c2442_clk_add(struct device *dev) +static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c index b3fdbdda3d5f..6d9b688c442b 100644 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ b/arch/arm/mach-s3c2440/s3c244x-clock.c @@ -72,7 +72,7 @@ static struct clk clk_arm = { }, }; -static int s3c244x_clk_add(struct device *dev) +static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) { unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); unsigned long clkdivn; diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c index 74d3dcf46a48..5fe8e58d3afd 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c2440/s3c244x-irq.c @@ -91,7 +91,7 @@ static struct irq_chip s3c_irq_cam = { .irq_ack = s3c_irq_cam_ack, }; -static int s3c244x_irq_add(struct device *dev) +static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index de6b4a23c9ed..14224517e621 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -135,7 +135,8 @@ static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = { .map_size = ARRAY_SIZE(s3c2443_dma_mappings), }; -static int __init s3c2443_dma_add(struct device *dev) +static int __init s3c2443_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); return s3c24xx_dma_init_map(&s3c2443_dma_sel); diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 35e4ff24fb43..ac2829f56d12 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -241,7 +241,8 @@ static int __init s3c2443_add_sub(unsigned int base, return 0; } -static int __init s3c2443_irq_add(struct device *dev) +static int __init s3c2443_irq_add(struct device *dev, + struct subsys_interface *sif) { printk("S3C2443: IRQ Support\n"); diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27dc4aeb..aebbcc291b4e 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .devname = "s3c2440-i2c.0", +#else + .devname = "s3c2440-i2c", +#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d4bd9e..bee7dcd4df7c 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -49,7 +49,7 @@ /* uart registration process */ -void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c index 23f9b22439c9..9cba18bfe47b 100644 --- a/arch/arm/mach-s5p64x0/pm.c +++ b/arch/arm/mach-s5p64x0/pm.c @@ -160,7 +160,7 @@ static void s5p64x0_pm_prepare(void) } -static int s5p64x0_pm_add(struct device *dev) +static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s5p64x0_pm_prepare; pm_cpu_sleep = s5p64x0_cpu_suspend; diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index c78dfddd77fd..b9ec0c35379f 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -175,7 +175,7 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); } -static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); } @@ -372,7 +372,7 @@ static struct clk init_clocks_off[] = { }, { .name = "hdmiphy", .devname = "s5pv210-hdmi", - .enable = exynos4_clk_hdmiphy_ctrl, + .enable = s5pv210_clk_hdmiphy_ctrl, .ctrlbit = (1 << 0), }, { .name = "dacphy", diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 677c71c41e50..736bfb103cbc 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -133,7 +133,7 @@ static void s5pv210_pm_prepare(void) s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } -static int s5pv210_pm_add(struct device *dev) +static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s5pv210_pm_prepare; pm_cpu_sleep = s5pv210_cpu_suspend; diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96c75ee..068b754bc348 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include <linux/serial_sci.h> #include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> @@ -37,7 +38,6 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> -#include <linux/dma-mapping.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> @@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { @@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a349f759..eeb4d9664584 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceeec1bb0..c8e7ca23fc06 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8e..a2813247b455 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> -#include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/dma-mapping.h> @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -208,6 +193,16 @@ */ /* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + +/* * FIXME !! * * gpio_no_direction @@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { @@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1473,9 +1423,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6a6e17..7727cca6136c 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515a9686..cad57578ceed 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0b69e3..9857595eaa79 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sh_intc.h> @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index 963532f2b2c4..d14c9b048077 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_AUDATA3, 0, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, - 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, + 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { /* IP4_31_29 [3] */ FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585a6acf..336093f9210a 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/gpio.h> +#include <mach/irqs.h> #include <mach/sh7372.h> #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 6fcf304d3cdf..a83cf51fc099 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -662,6 +662,7 @@ static struct sh_dmae_pdata usb_dma0_platform_data = { .dmaor_is_32bit = 1, .needs_tend_set = 1, .no_dmars = 1, + .slave_only = 1, }; static struct resource sh7372_usb_dmae0_resources[] = { @@ -723,6 +724,7 @@ static struct sh_dmae_pdata usb_dma1_platform_data = { .dmaor_is_32bit = 1, .needs_tend_set = 1, .no_dmars = 1, + .slave_only = 1, }; static struct resource sh7372_usb_dmae1_resources[] = { diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 0d159d64a345..2d0d4212be41 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) /* enable cache coherency */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3) + if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ else __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index fcf4f377b1dc..330afdfa2475 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -60,9 +60,9 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { .uartclk = 216000000, }, { /* serial port on mini-pcie */ - .membase = IO_ADDRESS(TEGRA_UARTD_BASE), - .mapbase = TEGRA_UARTD_BASE, - .irq = INT_UARTD, + .membase = IO_ADDRESS(TEGRA_UARTC_BASE), + .mapbase = TEGRA_UARTC_BASE, + .irq = INT_UARTC, .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, .type = PORT_TEGRA, .iotype = UPIO_MEM, @@ -174,7 +174,7 @@ static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline, static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { /* name parent rate enabled */ { "uarta", "pll_p", 216000000, true }, - { "uartd", "pll_p", 216000000, true }, + { "uartc", "pll_p", 216000000, true }, { "pll_p_out4", "pll_p", 24000000, true }, { "usbd", "clk_m", 12000000, false }, diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index ffa83f580db6..3c9f8da37ea3 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -22,7 +22,7 @@ /* SDCARD */ #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 +#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1 /* ULPI */ #define TEGRA_ULPI_RST TEGRA_GPIO_PV0 diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index d0132e8031a1..3c9339058bec 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -23,11 +23,6 @@ #include <linux/list.h> -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - -struct tegra_dma_req; -struct tegra_dma_channel; - #define TEGRA_DMA_REQ_SEL_CNTR 0 #define TEGRA_DMA_REQ_SEL_I2S_2 1 #define TEGRA_DMA_REQ_SEL_I2S_1 2 @@ -56,6 +51,11 @@ struct tegra_dma_channel; #define TEGRA_DMA_REQ_SEL_OWR 25 #define TEGRA_DMA_REQ_SEL_INVALID 31 +#if defined(CONFIG_TEGRA_SYSTEM_DMA) + +struct tegra_dma_req; +struct tegra_dma_channel; + enum tegra_dma_mode { TEGRA_DMA_SHARED = 1, TEGRA_DMA_MODE_CONTINOUS = 2, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1a3ca2488164..7edef9121632 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -631,7 +631,8 @@ comment "Processor Features" config ARM_LPAE bool "Support for the Large Physical Address Extension" - depends on MMU && CPU_V7 + depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ + !CPU_32v4 && !CPU_32v3 help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 07c4bc8ea0a4..a655d3da386d 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -54,9 +54,15 @@ loop1: and r1, r1, #7 @ mask of the bits for current cache only cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache +#ifdef CONFIG_PREEMPT + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic +#endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr mrc p15, 1, r1, c0, c0, 0 @ read the new csidr +#ifdef CONFIG_PREEMPT + restore_irqs_notrace r9 +#endif and r2, r1, #7 @ extract the length of the cache lines add r2, r2, #4 @ add 4 (line length offset) ldr r4, =0x3ff diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index ba159370fa5f..80632e8d7538 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -225,8 +225,7 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype)) continue; if (__phys_to_pfn(area->phys_addr) > pfn || - __pfn_to_phys(pfn) + offset + size-1 > - area->phys_addr + area->size-1) + __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1) continue; /* we can drop the lock here as we know *area is static */ read_unlock(&vmlist_lock); diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 64f9d1c7f1bb..3047ff923a63 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -3,7 +3,7 @@ #include <linux/types.h> -#ifdef CONFIG_ARCH_OMAP2PLUS +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) extern int omap_secure_ram_reserve_memblock(void); #else static inline void omap_secure_ram_reserve_memblock(void) diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index e5a2fde29b19..089899a7db72 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -789,10 +789,7 @@ void __init orion_xor1_init(unsigned long mapbase_low, /***************************************************************************** * EHCI ****************************************************************************/ -static struct orion_ehci_data orion_ehci_data = { - .phy_version = EHCI_PHY_NA, -}; - +static struct orion_ehci_data orion_ehci_data; static u64 ehci_dmamask = DMA_BIT_MASK(32); @@ -812,8 +809,10 @@ static struct platform_device orion_ehci = { }; void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq) + unsigned long irq, + enum orion_ehci_phy_ver phy_version) { + orion_ehci_data.phy_version = phy_version; fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, irq); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index 0fe08d77e835..a7fa005a5a0e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -89,7 +89,8 @@ void __init orion_xor1_init(unsigned long mapbase_low, unsigned long irq_1); void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq); + unsigned long irq, + enum orion_ehci_phy_ver phy_version); void __init orion_ehci_1_init(unsigned long mapbase, unsigned long irq); diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index 91553432711d..3b1e17bd3d17 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c @@ -64,8 +64,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, gpio_mode |= GPIO_INPUT_OK; if (*mpp_list & MPP_OUTPUT_MASK) gpio_mode |= GPIO_OUTPUT_OK; - if (sel != 0) - gpio_mode = 0; + orion_gpio_set_valid(num, gpio_mode); } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 32a6e394db24..f10768e988d4 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -468,8 +468,10 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) + if (!pd) { pd = &default_i2c_data; + pd->bus_num = 0; + } npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s3c_device_i2c0); |
