diff options
Diffstat (limited to 'arch/arm')
29 files changed, 313 insertions, 1330 deletions
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 24987c89609a..06229026f78b 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 15:46:42 2005 +# Linux kernel version: 2.6.15-rc2 +# Mon Nov 28 10:30:09 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -64,6 +64,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -98,12 +116,14 @@ CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y CONFIG_PXA_SHARPSL_25x=y # CONFIG_PXA_SHARPSL_27x is not set -# CONFIG_MACH_POODLE is not set +CONFIG_MACH_POODLE=y CONFIG_MACH_CORGI=y CONFIG_MACH_SHEPHERD=y CONFIG_MACH_HUSKY=y +CONFIG_MACH_TOSA=y CONFIG_PXA25x=y CONFIG_PXA_SHARP_C7xx=y +CONFIG_PXA_SSP=y # # Processor Type @@ -155,6 +175,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -235,6 +256,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -356,6 +381,10 @@ CONFIG_IP6_NF_RAW=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -413,6 +442,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set # CONFIG_VIA_FIR is not set +CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -431,7 +461,6 @@ CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_BCSP_TXCRC=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m @@ -459,6 +488,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -477,6 +511,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -532,6 +567,11 @@ CONFIG_MTD_NAND_SHARPSL=y # CONFIG_MTD_NAND_NANDSIM is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -551,14 +591,6 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -625,6 +657,7 @@ CONFIG_SCSI_MULTI_LUN=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -748,6 +781,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -850,11 +884,15 @@ CONFIG_UNIX98_PTYS=y # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -889,6 +927,7 @@ CONFIG_I2C_PXA=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -957,7 +996,10 @@ CONFIG_VIDEO_DEV=m # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_AUDIO_DECODER is not set +# CONFIG_VIDEO_DECODER is not set # # Radio Adapters @@ -976,13 +1018,12 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_PXA is not set CONFIG_FB_W100=y -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -991,6 +1032,7 @@ CONFIG_FB_W100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1087,15 +1129,15 @@ CONFIG_USB_SL811_CS=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m # -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1107,7 +1149,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -1185,6 +1226,7 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1340,6 +1382,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1466,7 +1509,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/configs/poodle_defconfig b/arch/arm/configs/poodle_defconfig deleted file mode 100644 index 72822907759f..000000000000 --- a/arch/arm/configs/poodle_defconfig +++ /dev/null @@ -1,1015 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 17:04:29 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -CONFIG_PXA_SHARPSL_25x=y -# CONFIG_PXA_SHARPSL_27x is not set -CONFIG_MACH_POODLE=y -# CONFIG_MACH_CORGI is not set -# CONFIG_MACH_SHEPHERD is not set -# CONFIG_MACH_HUSKY is not set -CONFIG_PXA25x=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_LOCOMO=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -# CONFIG_ARTHUR is not set - -# -# Power management options -# -CONFIG_PM=y -CONFIG_APM=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=y -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PPP_DEFLATE is not set -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_LOCOMO=y -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_CORGI is not set -CONFIG_KEYBOARD_SPITZ=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_PXA is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -CONFIG_I2C_DEBUG_CORE=y -CONFIG_I2C_DEBUG_ALGO=y -CONFIG_I2C_DEBUG_BUS=y -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# - -# -# Video Adapters -# -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_MAESTRO is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_PXA=y -# CONFIG_FB_W100 is not set -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set - -# -# MMC/SD Card support -# -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_PXA=y -# CONFIG_MMC_WBSD is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 900e04f8e38c..9895539533d6 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 17:11:19 2005 +# Linux kernel version: 2.6.15-rc2 +# Mon Nov 28 10:26:52 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -64,6 +64,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -98,10 +116,13 @@ CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y # CONFIG_PXA_SHARPSL_25x is not set CONFIG_PXA_SHARPSL_27x=y +CONFIG_MACH_AKITA=y CONFIG_MACH_SPITZ=y CONFIG_MACH_BORZOI=y CONFIG_PXA27x=y +CONFIG_IWMMXT=y CONFIG_PXA_SHARP_Cxx00=y +CONFIG_PXA_SSP=y # # Processor Type @@ -153,6 +174,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -233,6 +255,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -354,6 +380,10 @@ CONFIG_IP6_NF_RAW=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -411,6 +441,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set # CONFIG_VIA_FIR is not set +CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -429,7 +460,6 @@ CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_BCSP_TXCRC=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m @@ -457,6 +487,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -475,6 +510,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -530,6 +566,11 @@ CONFIG_MTD_NAND_SHARPSL=y # CONFIG_MTD_NAND_NANDSIM is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -549,14 +590,6 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -623,6 +656,7 @@ CONFIG_SCSI_MULTI_LUN=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -746,6 +780,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -771,6 +806,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_POWER is not set # # Input Device Drivers @@ -848,16 +884,37 @@ CONFIG_UNIX98_PTYS=y # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support # -# CONFIG_I2C is not set +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set # # Hardware Monitoring support @@ -891,14 +948,13 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y -# CONFIG_FB_W100 is not set # CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set # @@ -907,6 +963,7 @@ CONFIG_FB_PXA=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -965,15 +1022,15 @@ CONFIG_USB_SL811_CS=m # # USB Device Class drivers # +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m # -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -985,7 +1042,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -1058,6 +1114,7 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1218,6 +1275,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1344,7 +1402,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 7a3261f0bf79..9997098009a9 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -120,7 +120,6 @@ EXPORT_SYMBOL(__arch_strncpy_from_user); EXPORT_SYMBOL(__get_user_1); EXPORT_SYMBOL(__get_user_2); EXPORT_SYMBOL(__get_user_4); -EXPORT_SYMBOL(__get_user_8); EXPORT_SYMBOL(__put_user_1); EXPORT_SYMBOL(__put_user_2); diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 2ad4aa2a1536..55076a75e5bf 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -131,7 +131,7 @@ __syscall_start: .long sys_wait4 /* 115 */ .long sys_swapoff .long sys_sysinfo - .long sys_ipc_wrapper + .long sys_ipc .long sys_fsync .long sys_sigreturn_wrapper /* 120 */ .long sys_clone_wrapper @@ -254,7 +254,7 @@ __syscall_start: .long sys_fremovexattr .long sys_tkill .long sys_sendfile64 -/* 240 */ .long sys_futex_wrapper +/* 240 */ .long sys_futex .long sys_sched_setaffinity .long sys_sched_getaffinity .long sys_io_setup @@ -284,7 +284,7 @@ __syscall_start: .long sys_fstatfs64 .long sys_tgkill .long sys_utimes -/* 270 */ .long sys_arm_fadvise64_64_wrapper +/* 270 */ .long sys_arm_fadvise64_64 .long sys_pciconfig_iobase .long sys_pciconfig_read .long sys_pciconfig_write @@ -333,7 +333,7 @@ __syscall_start: .long sys_inotify_init .long sys_inotify_add_watch .long sys_inotify_rm_watch - .long sys_mbind_wrapper + .long sys_mbind /* 320 */ .long sys_get_mempolicy .long sys_set_mempolicy __syscall_end: diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d9fb819bf7cc..2a8d27e18fa7 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -614,6 +614,47 @@ __kuser_helper_start: /* * Reference prototype: * + * void __kernel_memory_barrier(void) + * + * Input: + * + * lr = return address + * + * Output: + * + * none + * + * Clobbered: + * + * the Z flag might be lost + * + * Definition and user space usage example: + * + * typedef void (__kernel_dmb_t)(void); + * #define __kernel_dmb (*(__kernel_dmb_t *)0xffff0fa0) + * + * Apply any needed memory barrier to preserve consistency with data modified + * manually and __kuser_cmpxchg usage. + * + * This could be used as follows: + * + * #define __kernel_dmb() \ + * asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \ + * : : : "lr","cc" ) + */ + +__kuser_memory_barrier: @ 0xffff0fa0 + +#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP) + mcr p15, 0, r0, c7, c10, 5 @ dmb +#endif + mov pc, lr + + .align 5 + +/* + * Reference prototype: + * * int __kernel_cmpxchg(int oldval, int newval, int *ptr) * * Input: @@ -642,6 +683,8 @@ __kuser_helper_start: * The C flag is also set if *ptr was changed to allow for assembly * optimization in the calling code. * + * Note: this routine already includes memory barriers as needed. + * * For example, a user space atomic_add implementation could look like this: * * #define atomic_add(ptr, val) \ @@ -698,10 +741,16 @@ __kuser_cmpxchg: @ 0xffff0fc0 #else +#ifdef CONFIG_SMP + mcr p15, 0, r0, c7, c10, 5 @ dmb +#endif ldrex r3, [r2] subs r3, r3, r0 strexeq r3, r1, [r2] rsbs r0, r3, #0 +#ifdef CONFIG_SMP + mcr p15, 0, r0, c7, c10, 5 @ dmb +#endif mov pc, lr #endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 066597f4345a..e2b42997ad33 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -48,8 +48,7 @@ work_pending: mov r0, sp @ 'regs' mov r2, why @ 'syscall' bl do_notify_resume - disable_irq @ disable interrupts - b no_work_pending + b ret_slow_syscall @ Check work again work_resched: bl schedule @@ -146,7 +145,7 @@ ENTRY(vector_swi) #endif enable_irq - str r4, [sp, #-S_OFF]! @ push fifth arg + stmdb sp!, {r4, r5} @ push fifth and sixth args get_thread_info tsk ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing @@ -205,7 +204,7 @@ ENTRY(sys_call_table) * Special system call wrappers */ @ r0 = syscall number -@ r5 = syscall table +@ r8 = syscall table .type sys_syscall, #function sys_syscall: eor scno, r0, #__NR_SYSCALL_BASE @@ -256,22 +255,6 @@ sys_sigaltstack_wrapper: ldr r2, [sp, #S_OFF + S_SP] b do_sigaltstack -sys_futex_wrapper: - str r5, [sp, #4] @ push sixth arg - b sys_futex - -sys_arm_fadvise64_64_wrapper: - str r5, [sp, #4] @ push r5 to stack - b sys_arm_fadvise64_64 - -sys_mbind_wrapper: - str r5, [sp, #4] - b sys_mbind - -sys_ipc_wrapper: - str r5, [sp, #4] @ push sixth arg - b sys_ipc - /* * Note: off_4k (r5) is always units of 4K. If we can't do the requested * offset, we return EINVAL. diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 8d8748407cbe..d7d69fd7039f 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -17,7 +17,6 @@ #include <asm/assembler.h> #include <asm/domain.h> -#include <asm/mach-types.h> #include <asm/procinfo.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> @@ -83,7 +82,7 @@ ENTRY(stext) @ and irqs disabled bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? - beq __error_p @ yes, error 'p' + beq __error_p @ yes, error 'p' bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' @@ -343,16 +342,12 @@ __create_page_tables: bne 1b #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS) /* - * If we're using the NetWinder, we need to map in - * the 16550-type serial port for the debug messages + * If we're using the NetWinder or CATS, we also need to map + * in the 16550-type serial port for the debug messages */ - teq r1, #MACH_TYPE_NETWINDER - teqne r1, #MACH_TYPE_CATS - bne 1f add r0, r4, #0xff000000 >> 18 orr r3, r7, #0x7c000000 str r3, [r0] -1: #endif #ifdef CONFIG_ARCH_RPC /* diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 6055e1427ba3..055bf5d28894 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -101,6 +101,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, break; case R_ARM_PC24: + case R_ARM_CALL: + case R_ARM_JUMP24: offset = (*(u32 *)loc & 0x00ffffff) << 2; if (offset & 0x02000000) offset -= 0x04000000; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 9a340e790da5..2b84f78d7b0f 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -242,6 +242,15 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in */ long aluop1, aluop2, ccbit; + if ((insn & 0x0fffffd0) == 0x012fff10) { + /* + * bx or blx + */ + alt = get_user_reg(child, insn & 15); + break; + } + + if ((insn & 0xf000) != 0xf000) break; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index a917e3dd3666..765922bcf9e7 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -595,23 +595,22 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, */ ret |= !valid_user_regs(regs); - /* - * Block the signal if we were unsuccessful. - */ if (ret != 0) { - spin_lock_irq(&tsk->sighand->siglock); - sigorsets(&tsk->blocked, &tsk->blocked, - &ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(&tsk->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(&tsk->sighand->siglock); + force_sigsegv(sig, tsk); + return; } - if (ret == 0) - return; + /* + * Block the signal if we were successful. + */ + spin_lock_irq(&tsk->sighand->siglock); + sigorsets(&tsk->blocked, &tsk->blocked, + &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(&tsk->blocked, sig); + recalc_sigpending(); + spin_unlock_irq(&tsk->sighand->siglock); - force_sigsegv(sig, tsk); } /* diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 80c8e4c8cefa..9a47770114d4 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -172,6 +172,10 @@ SECTIONS .comment 0 : { *(.comment) } } -/* those must never be empty */ +/* + * These must never be empty + * If you have to comment these two assert statements out, your + * binutils is too old (for other reasons as well) + */ ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index d204018070a4..c03ea8e666ba 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -54,15 +54,6 @@ __get_user_4: mov r0, #0 mov pc, lr - .global __get_user_8 -__get_user_8: -5: ldrt r2, [r0], #4 -6: ldrt r3, [r0] - mov r0, #0 - mov pc, lr - -__get_user_bad_8: - mov r3, #0 __get_user_bad: mov r2, #0 mov r0, #-EFAULT @@ -73,6 +64,4 @@ __get_user_bad: .long 2b, __get_user_bad .long 3b, __get_user_bad .long 4b, __get_user_bad - .long 5b, __get_user_bad_8 - .long 6b, __get_user_bad_8 .previous diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index 0364ba4b539e..d869af0023f8 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -260,7 +260,7 @@ static void __init clps7500_init_irq(void) static struct map_desc cl7500_io_desc[] __initdata = { { /* IO space */ - .virtual = IO_BASE, + .virtual = (unsigned long)IO_BASE, .pfn = __phys_to_pfn(IO_START), .length = IO_SIZE, .type = MT_DEVICE diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 0a41080d2266..3a22d84e1047 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -85,7 +85,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = { { .mapbase = IXP4XX_UART2_BASE_PHYS, .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART1, + .irq = IRQ_IXP4XX_UART2, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM, .regshift = 2, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index cd506646801a..2a58499c0968 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -44,6 +44,7 @@ config PXA_SHARPSL_25x config PXA_SHARPSL_27x bool "Sharp PXA270 models (SL-Cxx00)" select PXA27x + select IWMMXT endchoice @@ -60,7 +61,6 @@ config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends PXA_SHARPSL_25x select PXA_SHARP_C7xx - select PXA_SSP config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" @@ -77,6 +77,8 @@ config MACH_AKITA depends PXA_SHARPSL_27x select PXA_SHARP_Cxx00 select MACH_SPITZ + select I2C + select I2C_PXA config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" @@ -90,7 +92,7 @@ config MACH_BORZOI config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x config PXA25x bool diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 07892f4012d8..277498ae5b6c 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -43,6 +43,7 @@ #include <asm/arch/pxafb.h> #include <asm/arch/mmc.h> #include <asm/arch/irda.h> +#include <asm/arch/ohci.h> #include "generic.h" @@ -393,6 +394,25 @@ static struct platform_device *platform_devices[] __initdata = { &mst_flash_device[1], }; +static int mainstone_ohci_init(struct device *dev) +{ + /* setup Port1 GPIO pin. */ + pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ + pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ + + /* Set the Power Control Polarity Low and Power Sense + Polarity Low to active low. */ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + return 0; +} + +static struct pxaohci_platform_data mainstone_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = mainstone_ohci_init, +}; + static void __init mainstone_init(void) { int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ @@ -424,6 +444,7 @@ static void __init mainstone_init(void) pxa_set_mci_info(&mainstone_mci_platform_data); pxa_set_ficp_info(&mainstone_ficp_platform_data); + pxa_set_ohci_info(&mainstone_ohci_platform_data); } diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index f74b9af112dc..852ea72d8c80 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -155,19 +155,20 @@ int pxa_pm_enter(suspend_state_t state) PSPR = 0; /* restore registers */ + RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); + RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GAFR0_L); RESTORE(GAFR0_U); RESTORE(GAFR1_L); RESTORE(GAFR1_U); RESTORE(GAFR2_L); RESTORE(GAFR2_U); - RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); - RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); #ifdef CONFIG_PXA27x RESTORE(MDREFR); - RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3); - RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); + RESTORE_GPLEVEL(3); RESTORE(GPDR3); + RESTORE(GAFR3_L); RESTORE(GAFR3_U); + RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); RESTORE(PFER); RESTORE(PKWR); #endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index c722a9a91fcc..b41b1efaa2cf 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -21,6 +21,7 @@ #include <asm/hardware.h> #include <asm/irq.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/ohci.h> #include "generic.h" @@ -194,6 +195,11 @@ static struct platform_device ohci_device = { .resource = pxa27x_ohci_resources, }; +void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) +{ + ohci_device.dev.platform_data = info; +} + static struct platform_device *devices[] __initdata = { &ohci_device, }; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index c312054dfb88..e4f92efc616e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -14,7 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <linux/major.h> #include <linux/fs.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index e2c6fa23d3cd..af6580f1ceb8 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -30,7 +30,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/leds.h> -#include <asm/mach-types.h> #include <asm/hardware/amba.h> #include <asm/hardware/amba_clcd.h> #include <asm/hardware/arm_timer.h> diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 75efb5da5b6d..a66ac61233a2 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -293,7 +293,8 @@ static void __init get_assabet_scr(void) GPDR |= 0x3fc; /* Configure GPIO 9:2 as outputs */ GPSR = 0x3fc; /* Write 0xFF to GPIO 9:2 */ GPDR &= ~(0x3fc); /* Configure GPIO 9:2 as inputs */ - for(i = 100; i--; scr = GPLR); /* Read GPIO 9:2 */ + for(i = 100; i--; ) /* Read GPIO 9:2 */ + scr = GPLR; GPDR |= 0x3fc; /* restore correct pin direction */ scr &= 0x3fc; /* save as system configuration byte. */ SCR_value = scr; diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 59f47d4c2dfe..ffe73ba2bf17 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -51,4 +51,4 @@ obj-$(CONFIG_CPU_ARM1026) += proc-arm1026.o obj-$(CONFIG_CPU_SA110) += proc-sa110.o obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o -obj-$(CONFIG_CPU_V6) += proc-v6.o blockops.o +obj-$(CONFIG_CPU_V6) += proc-v6.o diff --git a/arch/arm/mm/blockops.c b/arch/arm/mm/blockops.c deleted file mode 100644 index 4f5ee2d08996..000000000000 --- a/arch/arm/mm/blockops.c +++ /dev/null @@ -1,185 +0,0 @@ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/mm.h> - -#include <asm/memory.h> -#include <asm/ptrace.h> -#include <asm/cacheflush.h> -#include <asm/traps.h> - -extern struct cpu_cache_fns blk_cache_fns; - -#define HARVARD_CACHE - -/* - * blk_flush_kern_dcache_page(kaddr) - * - * Ensure that the data held in the page kaddr is written back - * to the page in question. - * - * - kaddr - kernel address (guaranteed to be page aligned) - */ -static void __attribute__((naked)) -blk_flush_kern_dcache_page(void *kaddr) -{ - asm( - "add r1, r0, %0 \n\ - sub r1, r1, %1 \n\ -1: .word 0xec401f0e @ mcrr p15, 0, r0, r1, c14, 0 @ blocking \n\ - mov r0, #0 \n\ - mcr p15, 0, r0, c7, c5, 0 \n\ - mcr p15, 0, r0, c7, c10, 4 \n\ - mov pc, lr" - : - : "I" (PAGE_SIZE), "I" (L1_CACHE_BYTES)); -} - -/* - * blk_dma_inv_range(start,end) - * - * Invalidate the data cache within the specified region; we will - * be performing a DMA operation in this region and we want to - * purge old data in the cache. - * - * - start - virtual start address of region - * - end - virtual end address of region - */ -static void __attribute__((naked)) -blk_dma_inv_range_unified(unsigned long start, unsigned long end) -{ - asm( - "tst r0, %0 \n\ - mcrne p15, 0, r0, c7, c11, 1 @ clean unified line \n\ - tst r1, %0 \n\ - mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line\n\ - .word 0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0 @ blocking \n\ - mov r0, #0 \n\ - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer \n\ - mov pc, lr" - : - : "I" (L1_CACHE_BYTES - 1)); -} - -static void __attribute__((naked)) -blk_dma_inv_range_harvard(unsigned long start, unsigned long end) -{ - asm( - "tst r0, %0 \n\ - mcrne p15, 0, r0, c7, c10, 1 @ clean D line \n\ - tst r1, %0 \n\ - mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line \n\ - .word 0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0 @ blocking \n\ - mov r0, #0 \n\ - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer \n\ - mov pc, lr" - : - : "I" (L1_CACHE_BYTES - 1)); -} - -/* - * blk_dma_clean_range(start,end) - * - start - virtual start address of region - * - end - virtual end address of region - */ -static void __attribute__((naked)) -blk_dma_clean_range(unsigned long start, unsigned long end) -{ - asm( - ".word 0xec401f0c @ mcrr p15, 0, r1, r0, c12, 0 @ blocking \n\ - mov r0, #0 \n\ - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer \n\ - mov pc, lr"); -} - -/* - * blk_dma_flush_range(start,end) - * - start - virtual start address of region - * - end - virtual end address of region - */ -static void __attribute__((naked)) -blk_dma_flush_range(unsigned long start, unsigned long end) -{ - asm( - ".word 0xec401f0e @ mcrr p15, 0, r1, r0, c14, 0 @ blocking \n\ - mov pc, lr"); -} - -static int blockops_trap(struct pt_regs *regs, unsigned int instr) -{ - regs->ARM_r4 |= regs->ARM_r2; - regs->ARM_pc += 4; - return 0; -} - -static char *func[] = { - "Prefetch data range", - "Clean+Invalidate data range", - "Clean data range", - "Invalidate data range", - "Invalidate instr range" -}; - -static struct undef_hook blockops_hook __initdata = { - .instr_mask = 0x0fffffd0, - .instr_val = 0x0c401f00, - .cpsr_mask = PSR_T_BIT, - .cpsr_val = 0, - .fn = blockops_trap, -}; - -static int __init blockops_check(void) -{ - register unsigned int err asm("r4") = 0; - unsigned int err_pos = 1; - unsigned int cache_type; - int i; - - asm("mrc p15, 0, %0, c0, c0, 1" : "=r" (cache_type)); - - printk("Checking V6 block cache operations:\n"); - register_undef_hook(&blockops_hook); - - __asm__ ("mov r0, %0\n\t" - "mov r1, %1\n\t" - "mov r2, #1\n\t" - ".word 0xec401f2c @ mcrr p15, 0, r1, r0, c12, 2\n\t" - "mov r2, #2\n\t" - ".word 0xec401f0e @ mcrr p15, 0, r1, r0, c14, 0\n\t" - "mov r2, #4\n\t" - ".word 0xec401f0c @ mcrr p15, 0, r1, r0, c12, 0\n\t" - "mov r2, #8\n\t" - ".word 0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0\n\t" - "mov r2, #16\n\t" - ".word 0xec401f05 @ mcrr p15, 0, r1, r0, c5, 0\n\t" - : - : "r" (PAGE_OFFSET), "r" (PAGE_OFFSET + 128) - : "r0", "r1", "r2"); - - unregister_undef_hook(&blockops_hook); - - for (i = 0; i < ARRAY_SIZE(func); i++, err_pos <<= 1) - printk("%30s: %ssupported\n", func[i], err & err_pos ? "not " : ""); - - if ((err & 8) == 0) { - printk(" --> Using %s block cache invalidate\n", - cache_type & (1 << 24) ? "harvard" : "unified"); - if (cache_type & (1 << 24)) - cpu_cache.dma_inv_range = blk_dma_inv_range_harvard; - else - cpu_cache.dma_inv_range = blk_dma_inv_range_unified; - } - if ((err & 4) == 0) { - printk(" --> Using block cache clean\n"); - cpu_cache.dma_clean_range = blk_dma_clean_range; - } - if ((err & 2) == 0) { - printk(" --> Using block cache clean+invalidate\n"); - cpu_cache.dma_flush_range = blk_dma_flush_range; - cpu_cache.flush_kern_dcache_page = blk_flush_kern_dcache_page; - } - - return 0; -} - -__initcall(blockops_check); diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 47b0b767f080..dbfe9e891f01 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -66,6 +66,7 @@ struct vm_region { unsigned long vm_start; unsigned long vm_end; struct page *vm_pages; + int vm_active; }; static struct vm_region consistent_head = { @@ -104,6 +105,7 @@ vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) list_add_tail(&new->vm_list, &c->vm_list); new->vm_start = addr; new->vm_end = addr + size; + new->vm_active = 1; spin_unlock_irqrestore(&consistent_lock, flags); return new; @@ -120,7 +122,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad struct vm_region *c; list_for_each_entry(c, &head->vm_list, vm_list) { - if (c->vm_start == addr) + if (c->vm_active && c->vm_start == addr) goto out; } c = NULL; @@ -319,6 +321,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine); /* * free a page as defined by the above mapping. + * Must not be called with IRQs disabled. */ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle) { @@ -326,14 +329,18 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr unsigned long flags, addr; pte_t *ptep; + WARN_ON(irqs_disabled()); + size = PAGE_ALIGN(size); spin_lock_irqsave(&consistent_lock, flags); - c = vm_region_find(&consistent_head, (unsigned long)cpu_addr); if (!c) goto no_area; + c->vm_active = 0; + spin_unlock_irqrestore(&consistent_lock, flags); + if ((c->vm_end - c->vm_start) != size) { printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", __func__, c->vm_end - c->vm_start, size); @@ -372,8 +379,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr flush_tlb_kernel_range(c->vm_start, c->vm_end); + spin_lock_irqsave(&consistent_lock, flags); list_del(&c->vm_list); - spin_unlock_irqrestore(&consistent_lock, flags); kfree(c); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index c9a03981b785..330695b6b19d 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -155,14 +155,19 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p * space mappings, we can be lazy and remember that we may have dirty * kernel cache lines for later. Otherwise, we assume we have * aliasing mappings. + * + * Note that we disable the lazy flush for SMP. */ void flush_dcache_page(struct page *page) { struct address_space *mapping = page_mapping(page); +#ifndef CONFIG_SMP if (mapping && !mapping_mapped(mapping)) set_bit(PG_dcache_dirty, &page->flags); - else { + else +#endif + { __flush_dcache_page(mapping, page); if (mapping && cache_is_vivt()) __flush_dcache_aliases(mapping, page); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c168f322ef8c..8b276ee38acf 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -420,7 +420,8 @@ static void __init bootmem_init(struct meminfo *mi) * Set up device the mappings. Since we clear out the page tables for all * mappings above VMALLOC_END, we will remove any debug device mappings. * This means you have to be careful how you debug this function, or any - * called function. (Do it by code inspection!) + * called function. This means you can't use any function or debugging + * method which may touch any device, otherwise the kernel _will_ crash. */ static void __init devicemaps_init(struct machine_desc *mdesc) { @@ -428,6 +429,12 @@ static void __init devicemaps_init(struct machine_desc *mdesc) unsigned long addr; void *vectors; + /* + * Allocate the vector page early. + */ + vectors = alloc_bootmem_low_pages(PAGE_SIZE); + BUG_ON(!vectors); + for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); @@ -461,12 +468,6 @@ static void __init devicemaps_init(struct machine_desc *mdesc) create_mapping(&map); #endif - flush_cache_all(); - local_flush_tlb_all(); - - vectors = alloc_bootmem_low_pages(PAGE_SIZE); - BUG_ON(!vectors); - /* * Create a mapping for the machine vectors at the high-vectors * location (0xffff0000). If we aren't using high-vectors, also @@ -491,12 +492,13 @@ static void __init devicemaps_init(struct machine_desc *mdesc) mdesc->map_io(); /* - * Finally flush the tlb again - this ensures that we're in a - * consistent state wrt the writebuffer if the writebuffer needs - * draining. After this point, we can start to touch devices - * again. + * Finally flush the caches and tlb to ensure that we're in a + * consistent state wrt the writebuffer. This also ensures that + * any write-allocated cache lines in the vector page are written + * back. After this point, we can start to touch devices again. */ local_flush_tlb_all(); + flush_cache_all(); } /* diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 0f128c28fee4..10901398e4a2 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -130,8 +130,7 @@ remap_area_pages(unsigned long start, unsigned long phys_addr, * mapping. See include/asm-arm/proc-armv/pgtable.h for more information. */ void __iomem * -__ioremap(unsigned long phys_addr, size_t size, unsigned long flags, - unsigned long align) +__ioremap(unsigned long phys_addr, size_t size, unsigned long flags) { void * addr; struct vm_struct * area; diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 048c9c19aa4f..465487470d0e 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri Nov 11 21:55:04 2005 +# Last update: Fri Nov 25 14:43:04 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -857,12 +857,12 @@ osiris MACH_OSIRIS OSIRIS 842 maestro MACH_MAESTRO MAESTRO 843 tunge2 MACH_TUNGE2 TUNGE2 844 ixbbm MACH_IXBBM IXBBM 845 -mx27 MACH_MX27 MX27 846 +mx27ads MACH_MX27 MX27 846 ax8004 MACH_AX8004 AX8004 847 at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848 loft MACH_LOFT LOFT 849 magpie MACH_MAGPIE MAGPIE 850 -mx21 MACH_MX21 MX21 851 +mx21ads MACH_MX21 MX21 851 mb87m3400 MACH_MB87M3400 MB87M3400 852 mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853 davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 @@ -897,10 +897,16 @@ omi_board MACH_OMI_BOARD OMI_BOARD 882 mx21civ MACH_MX21CIV MX21CIV 883 mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884 xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885 -arch_s3c2413 MACH_ARCH_S3C2413 ARCH_S3C2413 886 s3c2413 MACH_S3C2413 S3C2413 887 samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888 wg302v1 MACH_WG302V1 WG302V1 889 wg302v2 MACH_WG302V2 WG302V2 890 eb42x MACH_EB42X EB42X 891 iq331es MACH_IQ331ES IQ331ES 892 +cosydsp MACH_COSYDSP COSYDSP 893 +uplat7d MACH_UPLAT7D UPLAT7D 894 +ptdavinci MACH_PTDAVINCI PTDAVINCI 895 +mbus MACH_MBUS MBUS 896 +nadia2vb MACH_NADIA2VB NADIA2VB 897 +r1000 MACH_R1000 R1000 898 +hw90250 MACH_HW90250 HW90250 899 |
