diff options
Diffstat (limited to 'arch/arm')
383 files changed, 7588 insertions, 3474 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dfeca559d700..b16396216896 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -279,6 +279,7 @@ config ARCH_INTEGRATOR select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_FPGA_IRQ select NEED_MACH_IO_H select NEED_MACH_MEMORY_H @@ -296,6 +297,7 @@ config ARCH_REALVIEW select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB @@ -314,6 +316,7 @@ config ARCH_VERSATILE select ARCH_WANT_OPTIONAL_GPIOLIB select NEED_MACH_IO_H if PCI select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ select ARM_TIMER_SP804 @@ -326,7 +329,7 @@ config ARCH_VEXPRESS select ARM_AMBA select ARM_TIMER_SP804 select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_PATA_PLATFORM @@ -334,6 +337,7 @@ config ARCH_VEXPRESS select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help This enables support for the ARM Ltd Versatile Express boards. @@ -598,6 +602,7 @@ config ARCH_LPC32XX select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select USE_OF + select HAVE_PWM help Support for the NXP LPC32XX family of processors @@ -689,6 +694,7 @@ config ARCH_PICOXCELL select ARM_VIC select CPU_V6K select DW_APB_TIMER + select DW_APB_TIMER_OF select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_TCM @@ -944,7 +950,7 @@ config ARCH_NOMADIK select ARM_AMBA select ARM_VIC select CPU_ARM926T - select CLKDEV_LOOKUP + select COMMON_CLK select GENERIC_CLOCKEVENTS select PINCTRL select MIGHT_HAVE_CACHE_L2X0 @@ -967,6 +973,7 @@ config ARCH_DAVINCI config ARCH_OMAP bool "TI OMAP" + depends on MMU select HAVE_CLK select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ @@ -1054,8 +1061,6 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" -source "arch/arm/mach-lpc32xx/Kconfig" - source "arch/arm/mach-msm/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 01a134141216..a03b5a7059e2 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -310,6 +310,32 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_VEXPRESS_UART0_DETECT + bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" + depends on ARCH_VEXPRESS && CPU_CP15_MMU + help + This option enables a simple heuristic which tries to determine + the motherboard's memory map variant (original or RS1) and then + choose the relevant UART0 base address. + + Note that this will only work with standard A-class core tiles, + and may fail with non-standard SMM or custom software models. + + config DEBUG_VEXPRESS_UART0_CA9 + bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" + depends on ARCH_VEXPRESS + help + This option selects UART0 at 0x10009000. Except for custom models, + this applies only to the V2P-CA9 tile. + + config DEBUG_VEXPRESS_UART0_RS1 + bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" + depends on ARCH_VEXPRESS + help + This option selects UART0 at 0x1c090000. This applies to most + of the tiles using the RS1 memory map, including all new A-class + core tiles, FPGA-based SMMs and software models. + config DEBUG_LL_UART_NONE bool "No low-level debugging UART" help diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts new file mode 100644 index 000000000000..29b9f15e7599 --- /dev/null +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -0,0 +1,113 @@ +/* + * aks-cdu.dts - Device Tree file for AK signal CDU + * + * Copyright (C) 2012 AK signal Brno a.s. + * 2012 Jiri Prchal <jiri.prchal@aksignal.cz> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "ge863-pro3.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs"; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart2: serial@fffb8000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart3: serial@fffd0000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 15 0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + ubootenv@c0000 { + label = "ubootenv"; + reg = <0xc0000 0x40000>; + }; + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + rootfs@500000 { + label = "rootfs"; + reg = <0x500000 0x7b00000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + red { + gpios = <&pioC 10 0>; + linux,default-trigger = "none"; + }; + + green { + gpios = <&pioA 5 1>; + linux,default-trigger = "none"; + default-state = "on"; + }; + + yellow { + gpios = <&pioB 20 1>; + linux,default-trigger = "none"; + }; + + blue { + gpios = <&pioB 21 1>; + linux,default-trigger = "none"; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts new file mode 100644 index 000000000000..a9af4db7234c --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts new file mode 100644 index 000000000000..d6a97d9eff72 --- /dev/null +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM"; + compatible = "ti,am335x-evm", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi new file mode 100644 index 000000000000..59509c48d7e5 --- /dev/null +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -0,0 +1,158 @@ +/* + * Device Tree Source for AM33XX SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,am33xx"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the AM33XX interconnect. + * The real AM33XX interconnect network is quite complex.Since + * that will not bring real advantage to represent that in DT + * for the moment, just use a fake OCP bus entry to represent + * the whole bus hierarchy. + */ + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@48200000 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <128>; + reg = <0x48200000 0x1000>; + }; + + gpio1: gpio@44e07000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@4804C000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@481AC000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@481AE000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@44E09000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + + uart4: serial@481A6000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + + uart5: serial@481A8000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + }; + + uart6: serial@481AA000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + }; + + i2c1: i2c@44E0B000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@4802A000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@4819C000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + }; +}; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts new file mode 100644 index 000000000000..474f760ecadf --- /dev/null +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI AM3517 EVM (AM3517/05)"; + compatible = "ti,am3517-evm", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; + +&i2c1 { + clock-frequency = <400000>; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index f449efc9825f..66389c1c6f62 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -52,10 +52,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <29 30 31>; }; ramc0: ramc@ffffea00 { @@ -81,25 +82,25 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 18 4 19 4>; + interrupts = <17 4 0 18 4 0 19 4 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 27 4 28 4>; + interrupts = <26 4 0 27 4 0 28 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,14 +127,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -142,7 +143,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4>; + interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart4: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4>; + interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart5: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4>; + interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,21 +188,21 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4>; + interrupts = <10 4 2>; status = "disabled"; }; adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4>; + interrupts = <5 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -253,7 +254,7 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4>; + interrupts = <20 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 0209913a65a2..b460d6ce9eb5 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -48,10 +48,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <30 31>; }; pmc: pmc@fffffc00 { @@ -68,13 +69,13 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; }; rstc@fffffd00 { @@ -90,7 +91,7 @@ pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -99,7 +100,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,14 +136,14 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,14 +170,14 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4>; + interrupts = <24 4 2>; status = "disabled"; }; }; @@ -200,7 +201,7 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4>; + interrupts = <29 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 7dbccaf199f7..bafa8806fc17 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -53,10 +53,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe400 { @@ -78,7 +79,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; @@ -90,25 +91,25 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,7 +136,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -144,7 +145,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -153,14 +154,14 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,7 +188,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4>; + interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -196,14 +197,14 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4>; + interrupts = <25 4 3>; status = "disabled"; }; adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4>; + interrupts = <20 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -257,14 +258,14 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index cb84de791b5a..bfac0dfc332c 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -50,7 +50,7 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; @@ -74,7 +74,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; shdwc@fffffe10 { @@ -85,25 +85,25 @@ tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -112,7 +112,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -121,7 +121,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -130,7 +130,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -139,14 +139,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -155,7 +155,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -164,7 +164,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -173,7 +173,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -201,7 +201,7 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 6b3ef4339ae7..4a18c393b136 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -51,10 +51,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { @@ -80,37 +81,37 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -119,7 +120,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -128,7 +129,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -137,7 +138,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -146,14 +147,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -162,7 +163,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -171,7 +172,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -180,21 +181,21 @@ macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4>; + interrupts = <24 4 3>; status = "disabled"; }; macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4>; + interrupts = <27 4 3>; status = "disabled"; }; adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -248,14 +249,14 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index 4ad5160018cb..3180a9c588b9 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -48,7 +48,7 @@ }; rtc@80154000 { - compatible = "stericsson,db8500-rtc"; + compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; interrupts = <0 18 0x4>; }; @@ -60,7 +60,7 @@ interrupts = <0 119 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; @@ -73,7 +73,7 @@ interrupts = <0 120 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; @@ -86,7 +86,7 @@ interrupts = <0 121 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; @@ -99,7 +99,7 @@ interrupts = <0 122 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; @@ -112,7 +112,7 @@ interrupts = <0 123 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <4>; @@ -125,7 +125,7 @@ interrupts = <0 124 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <5>; @@ -138,7 +138,7 @@ interrupts = <0 125 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <6>; @@ -151,7 +151,7 @@ interrupts = <0 126 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <7>; @@ -164,7 +164,7 @@ interrupts = <0 127 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <8>; @@ -206,62 +206,74 @@ // DB8500_REGULATOR_VAPE db8500_vape_reg: db8500_vape { + regulator-compatible = "db8500_vape"; regulator-name = "db8500-vape"; regulator-always-on; }; // DB8500_REGULATOR_VARM db8500_varm_reg: db8500_varm { + regulator-compatible = "db8500_varm"; regulator-name = "db8500-varm"; }; // DB8500_REGULATOR_VMODEM db8500_vmodem_reg: db8500_vmodem { + regulator-compatible = "db8500_vmodem"; regulator-name = "db8500-vmodem"; }; // DB8500_REGULATOR_VPLL db8500_vpll_reg: db8500_vpll { + regulator-compatible = "db8500_vpll"; regulator-name = "db8500-vpll"; }; // DB8500_REGULATOR_VSMPS1 db8500_vsmps1_reg: db8500_vsmps1 { + regulator-compatible = "db8500_vsmps1"; regulator-name = "db8500-vsmps1"; }; // DB8500_REGULATOR_VSMPS2 db8500_vsmps2_reg: db8500_vsmps2 { + regulator-compatible = "db8500_vsmps2"; regulator-name = "db8500-vsmps2"; }; // DB8500_REGULATOR_VSMPS3 db8500_vsmps3_reg: db8500_vsmps3 { + regulator-compatible = "db8500_vsmps3"; regulator-name = "db8500-vsmps3"; }; // DB8500_REGULATOR_VRF1 db8500_vrf1_reg: db8500_vrf1 { + regulator-compatible = "db8500_vrf1"; regulator-name = "db8500-vrf1"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSP db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-compatible = "db8500_sva_mmdsp"; regulator-name = "db8500-sva-mmdsp"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSPRET db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-compatible = "db8500_sva_mmdsp_ret"; regulator-name = "db8500-sva-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SVAPIPE db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-compatible = "db8500_sva_pipe"; regulator-name = "db8500_sva_pipe"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSP db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-compatible = "db8500_sia_mmdsp"; regulator-name = "db8500_sia_mmdsp"; }; @@ -272,38 +284,45 @@ // DB8500_REGULATOR_SWITCH_SIAPIPE db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-compatible = "db8500_sia_pipe"; regulator-name = "db8500-sia-pipe"; }; // DB8500_REGULATOR_SWITCH_SGA db8500_sga_reg: db8500_sga { + regulator-compatible = "db8500_sga"; regulator-name = "db8500-sga"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_B2R2_MCDE db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-compatible = "db8500_b2r2_mcde"; regulator-name = "db8500-b2r2-mcde"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_ESRAM12 db8500_esram12_reg: db8500_esram12 { + regulator-compatible = "db8500_esram12"; regulator-name = "db8500-esram12"; }; // DB8500_REGULATOR_SWITCH_ESRAM12RET db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-compatible = "db8500_esram12_ret"; regulator-name = "db8500-esram12-ret"; }; // DB8500_REGULATOR_SWITCH_ESRAM34 db8500_esram34_reg: db8500_esram34 { + regulator-compatible = "db8500_esram34"; regulator-name = "db8500-esram34"; }; // DB8500_REGULATOR_SWITCH_ESRAM34RET db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-compatible = "db8500_esram34_ret"; regulator-name = "db8500-esram34-ret"; }; }; @@ -312,12 +331,70 @@ compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ interrupts = <0 40 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + + ab8500-rtc { + compatible = "stericsson,ab8500-rtc"; + interrupts = <17 0x4 + 18 0x4>; + interrupt-names = "60S", "ALARM"; + }; + + ab8500-gpadc { + compatible = "stericsson,ab8500-gpadc"; + interrupts = <32 0x4 + 39 0x4>; + interrupt-names = "HW_CONV_END", "SW_CONV_END"; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + }; + + ab8500-usb { + compatible = "stericsson,ab8500-usb"; + interrupts = < 90 0x4 + 96 0x4 + 14 0x4 + 15 0x4 + 79 0x4 + 74 0x4 + 75 0x4>; + interrupt-names = "ID_WAKEUP_R", + "ID_WAKEUP_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_ADP_PROBE_PLUG", + "USB_ADP_PROBE_UNPLUG"; + vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; + v-ape-supply = <&db8500_vape_reg>; + musb_1v8-supply = <&db8500_vsmps2_reg>; + }; + + ab8500-ponkey { + compatible = "stericsson,ab8500-ponkey"; + interrupts = <6 0x4 + 7 0x4>; + interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; + }; + + ab8500-sysctrl { + compatible = "stericsson,ab8500-sysctrl"; + }; + + ab8500-pwm { + compatible = "stericsson,ab8500-pwm"; + }; + + ab8500-debugfs { + compatible = "stericsson,ab8500-debug"; + }; ab8500-regulators { compatible = "stericsson,ab8500-regulator"; // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-compatible = "ab8500_ldo_aux1"; regulator-name = "V-DISPLAY"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2900000>; @@ -328,6 +405,7 @@ // supplies to the on-board eMMC ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-compatible = "ab8500_ldo_aux2"; regulator-name = "V-eMMC1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; @@ -335,6 +413,7 @@ // supply for VAUX3; SDcard slots ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-compatible = "ab8500_ldo_aux3"; regulator-name = "V-MMC-SD"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; @@ -342,41 +421,49 @@ // supply for v-intcore12; VINTCORE12 LDO ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-compatible = "ab8500_ldo_initcore"; regulator-name = "V-INTCORE"; }; // supply for tvout; gpadc; TVOUT LDO ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-compatible = "ab8500_ldo_tvout"; regulator-name = "V-TVOUT"; }; // supply for ab8500-usb; USB LDO ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-compatible = "ab8500_ldo_usb"; regulator-name = "dummy"; }; // supply for ab8500-vaudio; VAUDIO LDO ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-compatible = "ab8500_ldo_audio"; regulator-name = "V-AUD"; }; // supply for v-anamic1 VAMic1-LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-compatible = "ab8500_ldo_anamic1"; regulator-name = "V-AMIC1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-compatible = "ab8500_ldo_amamic2"; regulator-name = "V-AMIC2"; }; // supply for v-dmic; VDMIC LDO ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-compatible = "ab8500_ldo_dmic"; regulator-name = "V-DMIC"; }; // supply for U8500 CSI/DSI; VANA LDO ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-compatible = "ab8500_ldo_ana"; regulator-name = "V-CSI/DSI"; }; }; diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts new file mode 100644 index 000000000000..d79b28d9c963 --- /dev/null +++ b/arch/arm/boot/dts/ea3250.dts @@ -0,0 +1,174 @@ +/* + * Embedded Artists LPC3250 board + * + * Copyright 2012 Roland Stigge <stigge@antcom.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "lpc32xx.dtsi" + +/ { + model = "Embedded Artists LPC3250 board based on NXP LPC3250"; + compatible = "ea,ea3250", "nxp,lpc3250"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0 0x4000000>; + }; + + ahb { + mac: ethernet@31060000 { + phy-mode = "rmii"; + use-iram; + }; + + /* Here, choose exactly one from: ohci, usbd */ + ohci@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; + +/* + usbd@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; +*/ + + /* 128MB Flash via SLC NAND controller */ + slc: flash@20020000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + nxp,wdr-clks = <14>; + nxp,wwidth = <260000000>; + nxp,whold = <104000000>; + nxp,wsetup = <200000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <34666666>; + nxp,rhold = <104000000>; + nxp,rsetup = <200000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + mtd0@00000000 { + label = "ea3250-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + mtd1@00080000 { + label = "ea3250-uboot"; + reg = <0x00080000 0x000c0000>; + read-only; + }; + + mtd2@00140000 { + label = "ea3250-kernel"; + reg = <0x00140000 0x00400000>; + }; + + mtd3@00540000 { + label = "ea3250-rootfs"; + reg = <0x00540000 0x07ac0000>; + }; + }; + + apb { + uart5: serial@40090000 { + status = "okay"; + }; + + uart3: serial@40080000 { + status = "okay"; + }; + + uart6: serial@40098000 { + status = "okay"; + }; + + i2c1: i2c@400A0000 { + clock-frequency = <100000>; + + eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; + + eeprom@57 { + compatible = "at,24c64"; + reg = <0x57>; + }; + + uda1380: uda1380@18 { + compatible = "nxp,uda1380"; + reg = <0x18>; + power-gpio = <&gpio 0x59 0>; + reset-gpio = <&gpio 0x51 0>; + dac-clk = "wspll"; + }; + + pca9532: pca9532@60 { + compatible = "nxp,pca9532"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x60>; + }; + }; + + i2c2: i2c@400A8000 { + clock-frequency = <100000>; + }; + + i2cusb: i2c@31020300 { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2d { + compatible = "nxp,isp1301"; + reg = <0x2d>; + }; + }; + + sd@20098000 { + wp-gpios = <&pca9532 5 0>; + cd-gpios = <&pca9532 4 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; + }; + }; + + fab { + uart1: serial@40014000 { + status = "okay"; + }; + + /* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */ + adc@40048000 { + status = "okay"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@21 { + label = "GPIO Key UP"; + linux,code = <103>; + gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts new file mode 100644 index 000000000000..b7354e6506de --- /dev/null +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -0,0 +1,41 @@ +/* + * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3 + * + * Copyright (C) 2012 Telit, + * 2012 Fabio Porcedda <fabio.porcedda@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "ge863-pro3.dtsi" + +/ { + model = "Telit EVK-PRO3 for Telit GE863-PRO3"; + compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + }; + +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index b8c476384eef..0c49caa09978 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -134,4 +134,16 @@ i2c@138D0000 { status = "disabled"; }; + + spi_0: spi@13920000 { + status = "disabled"; + }; + + spi_1: spi@13930000 { + status = "disabled"; + }; + + spi_2: spi@13940000 { + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 27afc8e535ca..1beccc8f14ff 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -179,4 +179,42 @@ i2c@138D0000 { status = "disabled"; }; + + spi_0: spi@13920000 { + status = "disabled"; + }; + + spi_1: spi@13930000 { + status = "disabled"; + }; + + spi_2: spi@13940000 { + gpios = <&gpc1 1 5 3 0>, + <&gpc1 3 5 3 0>, + <&gpc1 4 5 3 0>; + + w25x80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + cs-gpio = <&gpc1 2 1 0 3>; + samsung,spi-feedback-delay = <0>; + }; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index a1dd2ee83753..02891fe876e4 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -25,6 +25,12 @@ compatible = "samsung,exynos4210"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + gic:interrupt-controller@10490000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -33,6 +39,17 @@ reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; + watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; @@ -147,6 +164,36 @@ interrupts = <0 65 0>; }; + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 7>; /* preliminary */ + rx-dma-channel = <&pdma1 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_2: spi@13940000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13940000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 9>; /* preliminary */ + rx-dma-channel = <&pdma0 8>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 49945cc1bc7d..8a5e348793c7 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -71,4 +71,42 @@ i2c@12CD0000 { status = "disabled"; }; + + spi_0: spi@12d20000 { + status = "disabled"; + }; + + spi_1: spi@12d30000 { + gpios = <&gpa2 4 2 3 0>, + <&gpa2 6 2 3 0>, + <&gpa2 7 2 3 0>; + + w25q80bw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + cs-gpio = <&gpa2 5 1 0 3>; + samsung,spi-feedback-delay = <0>; + }; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; + }; + }; + }; + + spi_2: spi@12d40000 { + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 4272b2949228..004aaa8d123c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -23,6 +23,12 @@ compatible = "samsung,exynos5250"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + gic:interrupt-controller@10481000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -146,6 +152,36 @@ #size-cells = <0>; }; + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d20000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 5>; /* preliminary */ + rx-dma-channel = <&pdma0 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d30000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 5>; /* preliminary */ + rx-dma-channel = <&pdma1 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d40000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi new file mode 100644 index 000000000000..17136fc7a516 --- /dev/null +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -0,0 +1,52 @@ +/* + * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3 + * + * Copyright (C) 2012 Telit, + * 2012 Fabio Porcedda <fabio.porcedda@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "at91sam9260.dtsi" + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <6000000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + boot@0 { + label = "boot"; + reg = <0x0 0x7c0000>; + }; + + root@07c0000 { + label = "root"; + reg = <0x7c0000 0x7840000>; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs"; + }; +}; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 70bffa929b65..e3486f486b40 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -22,17 +22,60 @@ apb@80000000 { apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>; + status = "okay"; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>; - bus-width = <8>; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; wp-gpios = <&gpio1 30 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ + 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ + 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a>; + panel-enable-gpios = <&gpio1 18 0>; status = "okay"; }; }; apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + duart: serial@80070000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; @@ -40,4 +83,23 @@ }; }; }; + + regulators { + compatible = "simple-bus"; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts new file mode 100644 index 000000000000..20912b1d8893 --- /dev/null +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "i.MX23 Olinuxino Low Cost Board"; + compatible = "olimex,imx23-olinuxino", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts new file mode 100644 index 000000000000..757a327ff3e8 --- /dev/null +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -0,0 +1,78 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "Freescale STMP378x Development Board"; + compatible = "fsl,stmp378x-devb", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + wp-gpios = <&gpio1 30 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ + 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 8c5f9994f3fc..a874dbfb5ae6 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -18,6 +18,8 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + serial0 = &auart0; + serial1 = &auart1; }; cpus { @@ -57,13 +59,15 @@ status = "disabled"; }; - bch@8000a000 { - reg = <0x8000a000 2000>; - status = "disabled"; - }; - - gpmi@8000c000 { - reg = <0x8000c000 2000>; + gpmi-nand@8000c000 { + compatible = "fsl,imx23-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <13>, <56>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -114,24 +118,151 @@ duart_pins_a: duart@0 { reg = <0>; - fsl,pinmux-ids = <0x11a2 0x11b2>; + fsl,pinmux-ids = < + 0x11a2 /* MX23_PAD_PWM0__DUART_RX */ + 0x11b2 /* MX23_PAD_PWM1__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */ + 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */ + 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */ + 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */ + >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; + gpmi_pins_a: gpmi-nand@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */ + 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */ + 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */ + 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */ + 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */ + 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */ + 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */ + 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */ + 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */ + 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */ + 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */ + 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */ + 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ + 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ + 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */ + 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_fixup: gpmi-pins-fixup { + fsl,pinmux-ids = < + 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ + 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ + 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + >; + fsl,drive-strength = <2>; + }; + + mmc0_4bit_pins_a: mmc0-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ + 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ + 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ + 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ + 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; - fsl,pinmux-ids = <0x2020 0x2030 0x2040 - 0x2050 0x0082 0x0092 0x00a2 - 0x00b2 0x2000 0x2010 0x2060>; + fsl,pinmux-ids = < + 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ + 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ + 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ + 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ + 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */ + 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */ + 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */ + 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */ + 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_pins_fixup: mmc0-pins-fixup { - fsl,pinmux-ids = <0x2010 0x2060>; + fsl,pinmux-ids = < + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; + fsl,pull-up = <0>; + }; + + pwm2_pins_a: pwm2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11c0 /* MX23_PAD_PWM2__PWM2 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_24bit_pins_a: lcdif-24bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */ + 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */ + 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */ + 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */ + 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */ + 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */ + 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */ + 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */ + 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */ + 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */ + 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; fsl,pull-up = <0>; }; }; @@ -172,7 +303,9 @@ }; lcdif@80030000 { + compatible = "fsl,imx23-lcdif"; reg = <0x80030000 2000>; + interrupts = <46 45>; status = "disabled"; }; @@ -242,12 +375,16 @@ }; rtc@8005c000 { + compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; reg = <0x8005c000 2000>; - status = "disabled"; + interrupts = <22>; }; - pwm@80064000 { + pwm: pwm@80064000 { + compatible = "fsl,imx23-pwm"; reg = <0x80064000 2000>; + #pwm-cells = <2>; + fsl,pwm-number = <5>; status = "disabled"; }; @@ -257,12 +394,16 @@ }; auart0: serial@8006c000 { + compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; status = "disabled"; }; auart1: serial@8006e000 { + compatible = "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; + interrupts = <59 60 58>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts new file mode 100644 index 000000000000..d3f8296e19e0 --- /dev/null +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx27.dtsi" + +/ { + model = "mx27_3ds"; + compatible = "freescale,imx27-3ds", "fsl,imx27"; + + memory { + reg = <0x0 0x0>; + }; + + soc { + aipi@10000000 { /* aipi */ + + wdog@10002000 { + status = "okay"; + }; + + uart@1000a000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + fec@1002b000 { + status = "okay"; + }; + }; + }; + +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 386c769c38d1..00bae3aad5ab 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -121,7 +121,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@10015100 { @@ -131,7 +131,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@10015200 { @@ -141,7 +141,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@10015300 { @@ -151,7 +151,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@10015400 { @@ -161,7 +161,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@10015500 { @@ -171,7 +171,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; cspi3: cspi@10017000 { diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts new file mode 100644 index 000000000000..b383417a558f --- /dev/null +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -0,0 +1,198 @@ +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Bluegiga APX4 Development Kit"; + compatible = "bluegiga,apx4devkit", "fsl,imx28"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; + bus-width = <4>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ + 0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */ + 0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */ + 0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */ + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + 0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_apx4: lcdif-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */ + 0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */ + 0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */ + 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + 0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */ + 0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 { + fsl,pinmux-ids = < + 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + >; + fsl,drive-strength = <2>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_apx4>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; + }; + + auart2: serial@8006e000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "bluegiga,apx4devkit-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "apx4devkit-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio3 28 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts new file mode 100644 index 000000000000..c03a577beca3 --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -0,0 +1,52 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Crystalfontz CFA-10036 Board"; + compatible = "crystalfontz,cfa10036", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&gpio3 4 1>; + default-state = "on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index ee520a529cb4..773c0e84d1fb 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -22,6 +22,13 @@ apb@80000000 { apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; + status = "okay"; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -29,6 +36,7 @@ &mmc0_cd_cfg &mmc0_sck_cfg>; bus-width = <8>; wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; @@ -36,6 +44,72 @@ compatible = "fsl,imx28-mmc"; bus-width = <8>; wp-gpios = <&gpio0 28 0>; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ + 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */ + 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */ + 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ + 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */ + 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_evk: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_evk>; + panel-enable-gpios = <&gpio3 30 0>; + status = "okay"; + }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; + + can1: can@80034000 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; status = "okay"; }; }; @@ -68,19 +142,58 @@ }; }; + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; }; }; ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 13 0>; + phy-reset-duration = <100>; status = "okay"; }; @@ -102,6 +215,40 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_fec_3v3: fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 15 0>; + }; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + enable-active-high; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 8 0>; + enable-active-high; + }; }; sound { @@ -111,4 +258,21 @@ saif-controllers = <&saif0 &saif1>; audio-codec = <&sgtl5000>; }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio3 5 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts new file mode 100644 index 000000000000..183a3fd2d859 --- /dev/null +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "DENX M28EVK"; + compatible = "denx,m28evk", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00300000>; + read-only; + }; + + partition@1 { + label = "environment"; + reg = <0x00300000 0x00080000>; + }; + + partition@2 { + label = "redundant-environment"; + reg = <0x00380000 0x00080000>; + }; + + partition@3 { + label = "kernel"; + reg = <0x00400000 0x00400000>; + }; + + partition@4 { + label = "filesystem"; + reg = <0x00800000 0x0f800000>; + }; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio3 10 1>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ + 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */ + 0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + status = "okay"; + }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; + + can1: can@80034000 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + + eeprom: eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "stm,mt41t62"; + reg = <0x68>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio3 11 0>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "denx,m28evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "m28evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts new file mode 100644 index 000000000000..62bf767409a6 --- /dev/null +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -0,0 +1,97 @@ +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Ka-Ro electronics TX28 module"; + compatible = "karo,tx28", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + ds1339: rtc@68 { + compatible = "mxim,ds1339"; + reg = <0x68>; + }; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_4pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio4 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 4634cb861a59..915db89e3644 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -22,6 +22,11 @@ gpio4 = &gpio4; saif0 = &saif0; saif1 = &saif1; + serial0 = &auart0; + serial1 = &auart1; + serial2 = &auart2; + serial3 = &auart3; + serial4 = &auart4; }; cpus { @@ -68,15 +73,15 @@ status = "disabled"; }; - bch@8000a000 { - reg = <0x8000a000 2000>; - interrupts = <41>; - status = "disabled"; - }; - - gpmi@8000c000 { - reg = <0x8000c000 2000>; - interrupts = <42 88>; + gpmi-nand@8000c000 { + compatible = "fsl,imx28-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <88>, <41>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -161,7 +166,150 @@ duart_pins_a: duart@0 { reg = <0>; - fsl,pinmux-ids = <0x3102 0x3112>; + fsl,pinmux-ids = < + 0x3102 /* MX28_PAD_PWM0__DUART_RX */ + 0x3112 /* MX28_PAD_PWM1__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + duart_pins_b: duart@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ + 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + duart_4pins_a: duart-4pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ + 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */ + 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_a: gpmi-nand@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */ + 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */ + 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */ + 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */ + 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */ + 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */ + 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */ + 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */ + 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */ + 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */ + 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ + 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ + 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */ + 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */ + 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_status_cfg: gpmi-status-cfg { + fsl,pinmux-ids = < + 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ + 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ + 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + >; + fsl,drive-strength = <2>; + }; + + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ + 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */ + 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart0_2pins_a: auart0-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ + 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart1_pins_a: auart1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ + 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */ + 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart1_2pins_a: auart1-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ + 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart2_2pins_a: auart2-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */ + 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart3_pins_a: auart3@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ + 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ + 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */ + 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart3_2pins_a: auart3-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */ + 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */ + >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; @@ -169,9 +317,17 @@ mac0_pins_a: mac0@0 { reg = <0>; - fsl,pinmux-ids = <0x4000 0x4010 0x4020 - 0x4030 0x4040 0x4060 0x4070 - 0x4080 0x4100>; + fsl,pinmux-ids = < + 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */ + 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */ + 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */ + 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */ + 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */ + 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */ + 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */ + 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */ + 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -179,8 +335,14 @@ mac1_pins_a: mac1@0 { reg = <0>; - fsl,pinmux-ids = <0x40f1 0x4091 0x40a1 - 0x40e1 0x40b1 0x40c1>; + fsl,pinmux-ids = < + 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */ + 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */ + 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */ + 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */ + 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */ + 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -188,28 +350,61 @@ mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; - fsl,pinmux-ids = <0x2000 0x2010 0x2020 - 0x2030 0x2040 0x2050 0x2060 - 0x2070 0x2080 0x2090 0x20a0>; + fsl,pinmux-ids = < + 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ + 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ + 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ + 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ + 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */ + 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */ + 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */ + 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */ + 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_4bit_pins_a: mmc0-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ + 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ + 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ + 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ + 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_cd_cfg: mmc0-cd-cfg { - fsl,pinmux-ids = <0x2090>; + fsl,pinmux-ids = < + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + >; fsl,pull-up = <0>; }; mmc0_sck_cfg: mmc0-sck-cfg { - fsl,pinmux-ids = <0x20a0>; + fsl,pinmux-ids = < + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; fsl,drive-strength = <2>; fsl,pull-up = <0>; }; i2c0_pins_a: i2c0@0 { reg = <0>; - fsl,pinmux-ids = <0x3180 0x3190>; + fsl,pinmux-ids = < + 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */ + 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -217,8 +412,12 @@ saif0_pins_a: saif0@0 { reg = <0>; - fsl,pinmux-ids = - <0x3140 0x3150 0x3160 0x3170>; + fsl,pinmux-ids = < + 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */ + 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ + 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ + 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -226,11 +425,88 @@ saif1_pins_a: saif1@0 { reg = <0>; - fsl,pinmux-ids = <0x31a0>; + fsl,pinmux-ids = < + 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */ + >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; }; + + pwm0_pins_a: pwm0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3100 /* MX28_PAD_PWM0__PWM_0 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + pwm2_pins_a: pwm2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3120 /* MX28_PAD_PWM2__PWM_2 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_24bit_pins_a: lcdif-24bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */ + 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */ + 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */ + 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */ + 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */ + 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + can0_pins_a: can0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */ + 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + can1_pins_a: can1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */ + 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; digctl@8001c000 { @@ -272,18 +548,21 @@ }; lcdif@80030000 { + compatible = "fsl,imx28-lcdif"; reg = <0x80030000 2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { + compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80032000 2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { + compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80034000 2000>; interrupts = <9>; status = "disabled"; @@ -370,9 +649,9 @@ }; rtc@80056000 { + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; reg = <0x80056000 2000>; - interrupts = <28 29>; - status = "disabled"; + interrupts = <29>; }; i2c0: i2c@80058000 { @@ -393,8 +672,11 @@ status = "disabled"; }; - pwm@80064000 { + pwm: pwm@80064000 { + compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 2000>; + #pwm-cells = <2>; + fsl,pwm-number = <8>; status = "disabled"; }; @@ -404,30 +686,35 @@ }; auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; status = "disabled"; }; auart1: serial@8006c000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; status = "disabled"; }; auart2: serial@8006e000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; status = "disabled"; }; auart3: serial@80070000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; status = "disabled"; }; auart4: serial@80072000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; status = "disabled"; @@ -441,11 +728,13 @@ }; usbphy0: usbphy@8007c000 { + compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; status = "disabled"; }; usbphy1: usbphy@8007e000 { + compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007e000 0x2000>; status = "disabled"; }; @@ -459,13 +748,19 @@ reg = <0x80080000 0x80000>; ranges; - usbctrl0: usbctrl@80080000 { + usb0: usb@80080000 { + compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80080000 0x10000>; + interrupts = <93>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; - usbctrl1: usbctrl@80090000 { + usb1: usb@80090000 { + compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80090000 0x10000>; + interrupts = <92>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts new file mode 100644 index 000000000000..24731cb78e8e --- /dev/null +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -0,0 +1,31 @@ +/* + * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx31.dtsi" + +/ { + model = "Buglabs i.MX31 Bug 1.x"; + compatible = "fsl,imx31-bug", "fsl,imx31"; + + memory { + reg = <0x80000000 0x8000000>; /* 128M */ + }; + + soc { + aips@43f00000 { /* AIPS1 */ + uart5: serial@43fb4000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi new file mode 100644 index 000000000000..eef7099f3e3c --- /dev/null +++ b/arch/arm/boot/dts/imx31.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + }; + + avic: avic-interrupt-controller@60000000 { + compatible = "fsl,imx31-avic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x60000000 0x100000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&avic>; + ranges; + + aips@43f00000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x43f00000 0x100000>; + ranges; + + uart1: serial@43f90000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + status = "disabled"; + }; + + uart2: serial@43f94000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f94000 0x4000>; + interrupts = <32>; + status = "disabled"; + }; + + uart4: serial@43fb0000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43fb0000 0x4000>; + interrupts = <46>; + status = "disabled"; + }; + + uart5: serial@43fb4000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43fb4000 0x4000>; + interrupts = <47>; + status = "disabled"; + }; + }; + + spba@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x100000>; + ranges; + + uart3: serial@5000c000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <18>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index bfa65abe8ef2..922adefdd291 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -133,7 +133,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@73f88000 { @@ -143,7 +143,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@73f8c000 { @@ -153,7 +153,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@73f90000 { @@ -163,7 +163,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; wdog@73f98000 { /* WDOG1 */ diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index e3e869470cd3..4e735edc78ed 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -135,7 +135,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@53f88000 { @@ -145,7 +145,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@53f8c000 { @@ -155,7 +155,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@53f90000 { @@ -165,7 +165,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; wdog@53f98000 { /* WDOG1 */ @@ -203,7 +203,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@53fe0000 { @@ -213,7 +213,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@53fe4000 { @@ -223,7 +223,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; i2c@53fec000 { /* I2C3 */ diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index db4c6096c562..d792581672cc 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -22,6 +22,12 @@ }; soc { + gpmi-nand@00112000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_1>; + status = "disabled"; /* gpmi nand conflicts with SD */ + }; + aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index e0ec92973e7e..d42e851ceb97 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -27,6 +27,8 @@ ecspi@02008000 { /* eCSPI1 */ fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; status = "okay"; flash: m25p80@0 { @@ -42,9 +44,31 @@ }; }; + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_hog>; + + gpios { + pinctrl_gpio_hog: gpiohog { + fsl,pins = < + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + >; + }; + }; + }; }; aips-bus@02100000 { /* AIPS2 */ + usb@02184000 { /* USB OTG */ + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; + }; + + usb@02184200 { /* USB1 */ + status = "okay"; + }; + ethernet@02188000 { phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; @@ -111,6 +135,15 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; }; sound { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 8c90cbac945f..c25d49584814 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -87,6 +87,23 @@ interrupt-parent = <&intc>; ranges; + dma-apbh@00110000 { + compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x00110000 0x2000>; + }; + + gpmi-nand@00112000 { + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00112000 0x2000>, <0x00114000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 13 0x04>, <0 15 0x04>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <0>; + status = "disabled"; + }; + timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; @@ -266,7 +283,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@020a0000 { @@ -276,7 +293,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@020a4000 { @@ -286,7 +303,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@020a8000 { @@ -296,7 +313,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@020ac000 { @@ -306,7 +323,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@020b0000 { @@ -316,7 +333,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@020b4000 { @@ -326,7 +343,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; kpp@020b8000 { @@ -444,12 +461,14 @@ }; }; - usbphy@020c9000 { /* USBPHY1 */ + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; }; - usbphy@020ca000 { /* USBPHY2 */ + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 0x04>; }; @@ -495,6 +514,30 @@ }; }; + gpmi-nand { + pinctrl_gpmi_nand_1: gpmi-nand-1 { + fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ + 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ + 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ + 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ + 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ + 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ + 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ + 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ + 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ + 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ + 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ + 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ + 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ + 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ + 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ + 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ + 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ + 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ + 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + }; + }; + i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ @@ -538,6 +581,14 @@ 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ }; }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ + 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ + 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + }; + }; }; dcic@020e4000 { /* DCIC1 */ @@ -573,6 +624,36 @@ reg = <0x0217c000 0x4000>; }; + usb@02184000 { /* USB OTG */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + fsl,usbphy = <&usbphy1>; + status = "disabled"; + }; + + usb@02184200 { /* USB1 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <0 40 0x04>; + fsl,usbphy = <&usbphy2>; + status = "disabled"; + }; + + usb@02184400 { /* USB2 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 0x04>; + status = "disabled"; + }; + + usb@02184600 { /* USB3 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184600 0x200>; + interrupts = <0 42 0x04>; + status = "disabled"; + }; + ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 3f5dad801a98..e5ffe960dbf3 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -35,13 +35,14 @@ slc: flash@20020000 { compatible = "nxp,lpc3220-slc"; reg = <0x20020000 0x1000>; - status = "disable"; + status = "disabled"; }; - mlc: flash@200B0000 { + mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; - reg = <0x200B0000 0x1000>; - status = "disable"; + reg = <0x200a8000 0x11000>; + interrupts = <11 0>; + status = "disabled"; }; dma@31000000 { @@ -57,21 +58,21 @@ compatible = "nxp,ohci-nxp", "usb-ohci"; reg = <0x31020000 0x300>; interrupts = <0x3b 0>; - status = "disable"; + status = "disabled"; }; usbd@31020000 { compatible = "nxp,lpc3220-udc"; reg = <0x31020000 0x300>; interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; - status = "disable"; + status = "disabled"; }; clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <0x0e 0>; - status = "disable"; + status = "disabled"; }; mac: ethernet@31060000 { @@ -114,9 +115,10 @@ }; sd@20098000 { - compatible = "arm,pl180", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; interrupts = <0x0f 0>, <0x0d 0>; + status = "disabled"; }; i2s1: i2s@2009C000 { @@ -124,24 +126,42 @@ reg = <0x2009C000 0x1000>; }; + /* UART5 first since it is the default console, ttyS0 */ + uart5: serial@40090000 { + /* actually, ns16550a w/ 64 byte fifos! */ + compatible = "nxp,lpc3220-uart"; + reg = <0x40090000 0x1000>; + interrupts = <9 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; + }; + uart3: serial@40080000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40080000 0x1000>; + interrupts = <7 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; uart4: serial@40088000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40088000 0x1000>; - }; - - uart5: serial@40090000 { - compatible = "nxp,serial"; - reg = <0x40090000 0x1000>; + interrupts = <8 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; uart6: serial@40098000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40098000 0x1000>; + interrupts = <10 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; i2c1: i2c@400A0000 { @@ -192,18 +212,24 @@ }; uart1: serial@40014000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; + interrupts = <26 0>; + status = "disabled"; }; uart2: serial@40018000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-hsuart"; reg = <0x40018000 0x1000>; + interrupts = <25 0>; + status = "disabled"; }; - uart7: serial@4001C000 { - compatible = "nxp,serial"; - reg = <0x4001C000 0x1000>; + uart7: serial@4001c000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x4001c000 0x1000>; + interrupts = <24 0>; + status = "disabled"; }; rtc@40024000 { @@ -235,21 +261,28 @@ compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; - status = "disable"; + status = "disabled"; }; tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; - status = "disable"; + status = "disabled"; }; key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; + interrupts = <54 0>; + status = "disabled"; }; + pwm: pwm@4005C000 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005C000 0x8>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts new file mode 100644 index 000000000000..25b50b759dec --- /dev/null +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap2.dtsi" + +/ { + model = "TI OMAP2420 H4 board"; + compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x84000000>; /* 64 MB */ + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 5b4506c0a8c4..cdcb98c7e075 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,9 +61,9 @@ }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 2eee16ec59b4..f349ee9182ce 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -18,3 +18,31 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; }; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 99474fa5fac4..810947198208 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -215,5 +215,10 @@ compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc3"; }; + + wdt2: wdt@48314000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 1efe0c587985..9880c12877b3 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -32,6 +32,30 @@ linux,default-trigger = "mmc0"; }; }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "PandaBoard"; + + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; }; &i2c1 { @@ -43,6 +67,19 @@ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; }; /include/ "twl6030.dtsi" @@ -74,15 +111,15 @@ }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-pandaES.dts new file mode 100644 index 000000000000..d4ba43a48d9b --- /dev/null +++ b/arch/arm/boot/dts/omap4-pandaES.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index d08c4d137280..72216e932fc0 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -28,6 +28,14 @@ regulator-boot-on; }; + vbat: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + regulator-min-microvolt = <3750000>; + regulator-max-microvolt = <3750000>; + regulator-boot-on; + }; + leds { compatible = "gpio-leds"; debug0 { @@ -70,6 +78,41 @@ gpios = <&gpio5 11 0>; /* 139 */ }; }; + + sound { + compatible = "ti,abe-twl6040"; + ti,model = "SDP4430"; + + ti,jack-detection = <1>; + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + ti,dmic = <&dmic>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Earphone Spk", "EP", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "Vibrator", "VIBRAL", + "Vibrator", "VIBRAR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "MAINMIC", "Main Handset Mic", + "Main Handset Mic", "Main Mic Bias", + "SUBMIC", "Sub Handset Mic", + "Sub Handset Mic", "Main Mic Bias", + "AFML", "Line In", + "AFMR", "Line In", + "DMic", "Digital Mic", + "Digital Mic", "Digital Mic1 Bias"; + }; }; &i2c1 { @@ -81,6 +124,31 @@ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + + /* regulators for vibra motor */ + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + + vibra { + /* Vibra driver, motor resistance parameters */ + ti,vibldrv-res = <8>; + ti,vibrdrv-res = <3>; + ti,viblmotor-res = <10>; + ti,vibrmotor-res = <10>; + }; + }; }; /include/ "twl6030.dtsi" @@ -147,11 +215,11 @@ }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var_som.dts new file mode 100644 index 000000000000..6601e6af6092 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var_som.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap4.dtsi" + +/ { + model = "Variscite OMAP4 SOM"; + compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vdd_eth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_ETH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-boot-on; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * Temperature Sensor + * http://www.ti.com/lit/ds/symlink/tmp105.pdf + */ + tmp105@49 { + compatible = "ti,tmp105"; + reg = <0x49>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; +}; + +&mcspi1 { + eth@0 { + compatible = "ks8851"; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <11>; /* gpio line 171 */ + vdd-supply = <&vdd_eth>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + ti,bus-width = <8>; + ti,non-removable; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + ti,bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 359c4979c8aa..04cbbcb6ff91 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -272,5 +272,28 @@ ti,hwmods = "mmc5"; ti,needs-special-reset; }; + + wdt2: wdt@4a314000 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; + + mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; + }; + + dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; + }; }; }; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index c4ff6d1a018b..802ec5b2fd00 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -54,6 +54,17 @@ #address-cells = <1>; #size-cells = <1>; + nxp,wdr-clks = <14>; + nxp,wwidth = <40000000>; + nxp,whold = <100000000>; + nxp,wsetup = <100000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <40000000>; + nxp,rhold = <66666666>; + nxp,rsetup = <100000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + mtd0@00000000 { label = "phy3250-boot"; reg = <0x00000000 0x00064000>; @@ -83,6 +94,14 @@ }; apb { + uart5: serial@40090000 { + status = "okay"; + }; + + uart3: serial@40080000 { + status = "okay"; + }; + i2c1: i2c@400A0000 { clock-frequency = <100000>; @@ -114,16 +133,58 @@ }; ssp0: ssp@20084000 { + #address-cells = <1>; + #size-cells = <0>; + pl022,num-chipselects = <1>; + cs-gpios = <&gpio 3 5 0>; + eeprom: at25@0 { + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + + at25,byte-len = <0x8000>; + at25,addr-mode = <2>; + at25,page-size = <64>; + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; }; }; + + sd@20098000 { + wp-gpios = <&gpio 3 0 0>; + cd-gpios = <&gpio 3 1 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; + }; }; fab { + uart2: serial@40018000 { + status = "okay"; + }; + tsc@40048000 { status = "okay"; }; + + key@40050000 { + status = "okay"; + keypad,num-rows = <1>; + keypad,num-columns = <1>; + nxp,debounce-delay-ms = <3>; + nxp,scan-delay-ms = <34>; + linux,keymap = <0x00000002>; + }; }; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index ec3c33975110..7e334d4cae21 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -77,6 +77,8 @@ used-led { label = "user_led"; gpios = <&gpio4 14 0x4>; + default-state = "on"; + linux,default-trigger = "heartbeat"; }; }; @@ -101,15 +103,30 @@ }; }; + // External Micro SD slot sdi@80126000 { - status = "enabled"; + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + + #gpio-cells = <1>; cd-gpios = <&gpio6 26 0x4>; // 218 + cd-inverted; + + status = "okay"; }; + // On-board eMMC sdi@80114000 { - status = "enabled"; + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; }; uart@80120000 { diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 10dcec7e7321..f7b84aced654 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -43,8 +43,8 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 8 0x04 - 0 9 0x04>; + interrupts = <0 6 0x04 + 0 7 0x04>; }; L2: l2-cache { @@ -119,8 +119,8 @@ gmac0: eth@e2000000 { compatible = "st,spear600-gmac"; reg = <0xe2000000 0x8000>; - interrupts = <0 23 0x4 - 0 24 0x4>; + interrupts = <0 33 0x4 + 0 34 0x4>; interrupt-names = "macirq", "eth_wake_irq"; status = "disabled"; }; @@ -202,6 +202,7 @@ kbd@e0300000 { compatible = "st,spear300-kbd"; reg = <0xe0300000 0x1000>; + interrupts = <0 52 0x4>; status = "disabled"; }; @@ -224,7 +225,7 @@ serial@e0000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xe0000000 0x1000>; - interrupts = <0 36 0x4>; + interrupts = <0 35 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index c13fd1f3b09f..e4e912f95024 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -15,8 +15,8 @@ /include/ "spear320.dtsi" / { - model = "ST SPEAr300 Evaluation Board"; - compatible = "st,spear300-evb", "st,spear300"; + model = "ST SPEAr320 Evaluation Board"; + compatible = "st,spear320-evb", "st,spear320"; #address-cells = <1>; #size-cells = <1>; @@ -26,7 +26,7 @@ ahb { pinmux@b3000000 { - st,pinmux-mode = <3>; + st,pinmux-mode = <4>; pinctrl-names = "default"; pinctrl-0 = <&state_default>; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 089f0a42c50e..a3c36e47d7ef 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -181,6 +181,7 @@ timer@f0000000 { compatible = "st,spear-timer"; reg = <0xf0000000 0x400>; + interrupt-parent = <&vic0>; interrupts = <16>; }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 7de701365fce..f146dbf6f7f8 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -307,7 +307,6 @@ cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index bfeb117d5aea..684a9e1ff7e9 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -301,7 +301,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 89cb7f2acd92..85e621ab2968 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -64,11 +64,6 @@ nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc", "owc", "spdi", "spdo", - "uac"; - nvidia,function = "rsvd2"; - }; dta { nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; nvidia,function = "vi"; @@ -129,14 +124,14 @@ "lspi", "lvp1", "lvs"; nvidia,function = "displaya"; }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; pmc { nvidia,pins = "pmc"; nvidia,function = "pwr_on"; }; - pta { - nvidia,pins = "pta"; - nvidia,function = "i2c2"; - }; rm { nvidia,pins = "rm"; nvidia,function = "i2c1"; @@ -176,7 +171,7 @@ conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "cdev1", "cdev2", "dap1", "dap2", - "dap4", "dtf", "gma", "gmc", "gmd", + "dap4", "ddc", "dtf", "gma", "gmc", "gmd", "gme", "gpu", "gpu7", "i2cp", "irrx", "irtx", "pta", "rm", "sdc", "sdd", "slxd", "slxk", "spdi", "spdo", "uac", @@ -185,7 +180,7 @@ nvidia,tristate = <0>; }; conf_ate { - nvidia,pins = "ate", "csus", "dap3", "ddc", + nvidia,pins = "ate", "csus", "dap3", "gpv", "owc", "slxc", "spib", "spid", "spie"; nvidia,pull = <0>; @@ -255,6 +250,39 @@ nvidia,slew-rate-falling = <3>; }; }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; }; i2s@70002800 { @@ -303,12 +331,37 @@ i2c@7000c400 { status = "okay"; clock-frequency = <100000>; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; - smart-battery@b { - compatible = "ti,bq20z75", "smart-battery-1.1"; - reg = <0xb>; - ti,i2c-retry-count = <2>; - ti,poll-retry-count = <10>; + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + smart-battery@b { + compatible = "ti,bq20z75", "smart-battery-1.1"; + reg = <0xb>; + ti,i2c-retry-count = <2>; + ti,poll-retry-count = <10>; + }; }; }; @@ -334,7 +387,7 @@ }; }; - emc { + memory-controller@0x7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; @@ -397,7 +450,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9de5636023f6..9de5636023f6 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 445343b0fbdd..be90544e6b59 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -314,7 +314,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts new file mode 100644 index 000000000000..6916310bf58f --- /dev/null +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -0,0 +1,301 @@ +/dts-v1/; + +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra2 Whistler evaluation board"; + compatible = "nvidia,whistler", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata", "atb", "ate", "gma", "gmb", + "gmc", "gmd", "gpu"; + nvidia,function = "gmi"; + }; + atc { + nvidia,pins = "atc", "atd"; + nvidia,function = "sdio4"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "osc"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd"; + nvidia,function = "vi"; + }; + dte { + nvidia,pins = "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gme { + nvidia,pins = "gme"; + nvidia,function = "dap5"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint", "pta"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uartb"; + }; + kbca { + nvidia,pins = "kbca", "kbcc", "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + kbcb { + nvidia,pins = "kbcb", "kbcd"; + nvidia,function = "sdio2"; + }; + lcsn { + nvidia,pins = "lcsn", "lsck", "lsda", "lsdi", + "spia", "spib", "spic"; + nvidia,function = "spi3"; + }; + ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldc", "ldi", + "lhp0", "lhp1", "lhp2", "lhs", "lm0", + "lm1", "lpp", "lpw0", "lpw1", "lpw2", + "lsc0", "lsc1", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "uac"; + nvidia,function = "owr"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd", "slxa", + "slxc", "slxd", "slxk"; + nvidia,function = "sdio3"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + spdi { + nvidia,pins = "spdi", "spdo"; + nvidia,function = "rsvd2"; + }; + spid { + nvidia,pins = "spid", "spie", "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + spif { + nvidia,pins = "spif"; + nvidia,function = "spi2"; + }; + uaa { + nvidia,pins = "uaa", "uab"; + nvidia,function = "uarta"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + uda { + nvidia,pins = "uda"; + nvidia,function = "spi1"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "ddc", "gma", + "gmb", "gmc", "gmd", "irrx", "irtx", + "kbca", "kbcb", "kbcc", "kbcd", "kbce", + "kbcf", "sdc", "sdd", "spie", "spig", + "spih", "uaa", "uab", "uad", "uca", + "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_atd { + nvidia,pins = "atd", "ate", "cdev1", "csus", + "dap1", "dap2", "dap3", "dap4", "dte", + "dtf", "gpu", "gpu7", "gpv", "i2cp", + "rm", "sdio1", "slxa", "slxc", "slxd", + "slxk", "spdi", "spdo", "uac", "uda"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_cdev2 { + nvidia,pins = "cdev2", "spia", "spib"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "lc", "pmca", + "pmcb", "pmcc", "pmcd", "xm2c", + "xm2d"; + nvidia,pull = <0>; + }; + conf_crtp { + nvidia,pins = "crtp"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd", + "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + }; + conf_gme { + nvidia,pins = "gme", "owc", "pta", "spic"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + conf_ls { + nvidia,pins = "ls", "pmce"; + nvidia,pull = <2>; + }; + drive_dap1 { + nvidia,pins = "drive_dap1"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <1>; + nvidia,low-power-mode = <0>; + nvidia,pull-down-strength = <0>; + nvidia,pull-up-strength = <0>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <216000000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + codec: codec@1a { + compatible = "wlf,wm8753"; + reg = <0x1a>; + }; + + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + usb@c5000000 { + status = "okay"; + nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + }; + + usb@c5008000 { + status = "okay"; + nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + }; + + sdhci@c8000400 { + status = "okay"; + wp-gpios = <&gpio 173 0>; /* gpio PV5 */ + bus-width = <8>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8753-whistler", + "nvidia,tegra-audio-wm8753"; + nvidia,model = "NVIDIA Tegra Whistler"; + + nvidia,audio-routing = + "Headphone Jack", "LOUT1", + "Headphone Jack", "ROUT1", + "MIC2", "Mic Jack", + "MIC2N", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; + }; +}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c417d67e9027..9f1921634eb7 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -72,7 +72,7 @@ reg = <0x70002800 0x200>; interrupts = <0 13 0x04>; nvidia,dma-request-selector = <&apbdma 2>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70002a00 { @@ -80,7 +80,7 @@ reg = <0x70002a00 0x200>; interrupts = <0 3 0x04>; nvidia,dma-request-selector = <&apbdma 1>; - status = "disable"; + status = "disabled"; }; serial@70006000 { @@ -88,7 +88,7 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -96,7 +96,7 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -104,7 +104,7 @@ reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -112,7 +112,7 @@ reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -120,7 +120,7 @@ reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; }; i2c@7000c000 { @@ -129,7 +129,7 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -138,7 +138,7 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -147,7 +147,7 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -156,7 +156,7 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -164,7 +164,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller@0x7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -177,7 +177,7 @@ 0x58000000 0x02000000>; /* GART aperture */ }; - emc { + memory-controller@0x7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; @@ -190,7 +190,7 @@ interrupts = <0 20 0x04>; phy_type = "utmi"; nvidia,has-legacy-mode; - status = "disable"; + status = "disabled"; }; usb@c5004000 { @@ -198,7 +198,7 @@ reg = <0xc5004000 0x4000>; interrupts = <0 21 0x04>; phy_type = "ulpi"; - status = "disable"; + status = "disabled"; }; usb@c5008000 { @@ -206,35 +206,35 @@ reg = <0xc5008000 0x4000>; interrupts = <0 97 0x04>; phy_type = "utmi"; - status = "disable"; + status = "disabled"; }; sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts index 36321bceec46..c169bced131e 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra30-cardhu.dts @@ -144,7 +144,6 @@ sdhci@78000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2dcc09e784b5..da740191771f 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -82,7 +82,7 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -90,7 +90,7 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -98,7 +98,7 @@ reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -106,7 +106,7 @@ reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -114,7 +114,7 @@ reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; }; i2c@7000c000 { @@ -123,7 +123,7 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -132,7 +132,7 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -141,7 +141,7 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c700 { @@ -150,7 +150,7 @@ interrupts = <0 120 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -159,7 +159,7 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -167,7 +167,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller { compatible = "nvidia,tegra30-mc"; reg = <0x7000f000 0x010 0x7000f03c 0x1b4 @@ -201,35 +201,35 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; - status = "disable"; + status = "disabled"; }; tegra_i2s1: i2s@70080400 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70080500 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; - status = "disable"; + status = "disabled"; }; tegra_i2s3: i2s@70080600 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; - status = "disable"; + status = "disabled"; }; tegra_i2s4: i2s@70080700 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; - status = "disable"; + status = "disabled"; }; }; @@ -237,28 +237,28 @@ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000200 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000400 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000600 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 16076e2d0934..d8a827bd2bf3 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -55,6 +55,8 @@ reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; }; usb@2,03000000 { @@ -157,6 +159,7 @@ v2m_timer23: timer@120000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x120000 0x1000>; + interrupts = <3>; }; /* DVI I2C bus */ @@ -197,5 +200,13 @@ interrupts = <14>; }; }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index a6c9c7c82d53..dba53fd026bb 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -54,6 +54,8 @@ reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; }; usb@3,03000000 { @@ -156,6 +158,7 @@ v2m_timer23: timer@12000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x12000 0x1000>; + interrupts = <3>; }; /* DVI I2C bus */ @@ -196,5 +199,13 @@ interrupts = <14>; }; }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 7e1091d91af8..d12b34ca0568 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -14,8 +14,8 @@ arm,hbi = <0x237>; compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress"; interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; chosen { }; @@ -47,23 +47,23 @@ memory@80000000 { device_type = "memory"; - reg = <0x80000000 0x40000000>; + reg = <0 0x80000000 0 0x40000000>; }; hdlcd@2b000000 { compatible = "arm,hdlcd"; - reg = <0x2b000000 0x1000>; + reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; - reg = <0x2b0a0000 0x1000>; + reg = <0 0x2b0a0000 0 0x1000>; }; wdt@2b060000 { compatible = "arm,sp805", "arm,primecell"; - reg = <0x2b060000 0x1000>; + reg = <0 0x2b060000 0 0x1000>; interrupts = <98>; }; @@ -72,23 +72,23 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c002000 0x1000>, - <0x2c004000 0x2000>, - <0x2c006000 0x2000>; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; }; memory-controller@7ffd0000 { compatible = "arm,pl354", "arm,primecell"; - reg = <0x7ffd0000 0x1000>; + reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; }; dma@7ffb0000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x7ffb0000 0x1000>; + reg = <0 0x7ffb0000 0 0x1000>; interrupts = <0 92 4>, <0 88 4>, <0 89 4>, @@ -111,12 +111,12 @@ }; motherboard { - ranges = <0 0 0x08000000 0x04000000>, - <1 0 0x14000000 0x04000000>, - <2 0 0x18000000 0x04000000>, - <3 0 0x1c000000 0x04000000>, - <4 0 0x0c000000 0x04000000>, - <5 0 0x10000000 0x04000000>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts new file mode 100644 index 000000000000..4890a81c5467 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -0,0 +1,188 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A15x2 A7x3 + * Cortex-A15_A7 MPCore (V2P-CA15_A7) + * + * HBI-0249A + */ + +/dts-v1/; + +/ { + model = "V2P-CA15_CA7"; + arm,hbi = <0x249>; + compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + +/* A7s disabled till big.LITTLE patches are available... + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + }; +*/ + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x40000000>; + }; + + wdt@2a490000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0 0x2a490000 0 0x1000>; + interrupts = <98>; + }; + + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0 0x2b000000 0 0x1000>; + interrupts = <0 85 4>; + }; + + memory-controller@2b0a0000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0 0x2b0a0000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <0 86 4>, + <0 87 4>; + }; + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0 0x7ff00000 0 0x1000>; + interrupts = <0 92 4>, + <0 88 4>, + <0 89 4>, + <0 90 4>, + <0 91 4>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 68 4>, + <0 69 4>; + }; + + motherboard { + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 4fa60547494a..eceed186a3c1 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -1,5 +1,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 @@ -16,8 +18,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_LPC32XX=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -52,13 +52,17 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MUSEUM_IDS=y +CONFIG_MTD_NAND_SLC_LPC32XX=y +CONFIG_MTD_NAND_MLC_LPC32XX=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -79,16 +83,22 @@ CONFIG_LPC_ENET=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set +CONFIG_INPUT_MATRIXKMAP=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_LPC32XX=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_LPC32XX=y +CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_HS_LPC32XX=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -96,7 +106,8 @@ CONFIG_I2C_PNX=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set +CONFIG_SENSORS_DS620=y +CONFIG_SENSORS_MAX6639=y CONFIG_WATCHDOG=y CONFIG_PNX4008_WATCHDOG=y CONFIG_FB=y @@ -133,6 +144,8 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_PCA9532=y +CONFIG_LEDS_PCA9532_GPIO=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y @@ -146,10 +159,10 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_LPC32XX=y CONFIG_DMADEVICES=y -CONFIG_AMBA_PL08X=y CONFIG_STAGING=y -CONFIG_IIO=y CONFIG_LPC32XX_ADC=y +CONFIG_MAX517=y +CONFIG_IIO=y CONFIG_EXT2_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -159,7 +172,6 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_WBUF_VERIFY=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 5c903708974c..b152de79fd95 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y @@ -197,6 +196,7 @@ CONFIG_RTC_DRV_TWL4030=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 68374ba6a943..c79f61faa3a5 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -243,7 +243,7 @@ typedef struct { #define ATOMIC64_INIT(i) { (i) } -static inline u64 atomic64_read(atomic64_t *v) +static inline u64 atomic64_read(const atomic64_t *v) { u64 result; diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index 3d2220498abc..6ddbe446425e 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -60,13 +60,13 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_CPU_USE_DOMAINS -#define set_domain(x) \ - do { \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c3, c0 @ set domain" \ - : : "r" (x)); \ - isb(); \ - } while (0) +static inline void set_domain(unsigned val) +{ + asm volatile( + "mcr p15, 0, %0, c3, c0 @ set domain" + : : "r" (val)); + isb(); +} #define modify_domain(dom,type) \ do { \ @@ -78,8 +78,8 @@ } while (0) #else -#define set_domain(x) do { } while (0) -#define modify_domain(dom,type) do { } while (0) +static inline void set_domain(unsigned val) { } +static inline void modify_domain(unsigned dom, unsigned type) { } #endif /* diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index b79f8e97f775..af7b0bda3355 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -148,7 +148,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 -#define TIF_SYSCALL_RESTARTSYS 10 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -164,11 +163,9 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SYSCALL_RESTARTSYS) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 8349d4e97e2b..16cedb42c0c3 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -40,13 +40,6 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -/* - * No architecture-specific irq_finish function defined in arm/arch/irqs.h. - */ -#ifndef irq_finish -#define irq_finish(irq) do { } while (0) -#endif - unsigned long irq_err_count; int arch_show_interrupts(struct seq_file *p, int prec) @@ -85,9 +78,6 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs) generic_handle_irq(irq); } - /* AT91 specific workaround */ - irq_finish(irq); - irq_exit(); set_irq_regs(old_regs); } diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index ba32b393b3f0..38c1a3b103a0 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -187,8 +187,8 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("mov pc, r",0,2f,"") TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") TEST_BB( "sub pc, pc, #1b-2b+8") -#if __LINUX_ARM_ARCH__ >= 6 - TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */ +#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) + TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 186c8cb982c5..a02eada3aa5d 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -503,7 +503,7 @@ __hw_perf_event_init(struct perf_event *event) event_requires_mode_exclusion(&event->attr)) { pr_debug("ARM performance counters do not support " "mode exclusion\n"); - return -EPERM; + return -EOPNOTSUPP; } /* diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 5700a7ae7f0b..14e38261cd31 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -25,7 +25,6 @@ #include <linux/regset.h> #include <linux/audit.h> #include <linux/tracehook.h> -#include <linux/unistd.h> #include <asm/pgtable.h> #include <asm/traps.h> @@ -918,8 +917,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS)) - scno = __NR_restart_syscall - __NR_SYSCALL_BASE; if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index fd2392a17ac1..536c5d6b340b 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -27,6 +27,7 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) +#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -47,6 +48,18 @@ const unsigned long sigreturn_codes[7] = { }; /* + * Either we support OABI only, or we have EABI with the OABI + * compat layer enabled. In the later case we don't know if + * user space is EABI or not, and if not we must not clobber r7. + * Always using the OABI syscall solves that issue and works for + * all those cases. + */ +const unsigned long syscall_restart_code[2] = { + SWI_SYS_RESTART, /* swi __NR_restart_syscall */ + 0xe49df004, /* ldr pc, [sp], #4 */ +}; + +/* * atomically swap in the new signal mask, and wait for a signal. */ asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask) @@ -592,10 +605,12 @@ static void do_signal(struct pt_regs *regs, int syscall) case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: - case -ERESTART_RESTARTBLOCK: regs->ARM_r0 = regs->ARM_ORIG_r0; regs->ARM_pc = restart_addr; break; + case -ERESTART_RESTARTBLOCK: + regs->ARM_r0 = -EINTR; + break; } } @@ -611,14 +626,12 @@ static void do_signal(struct pt_regs *regs, int syscall) * debugger has chosen to restart at a different PC. */ if (regs->ARM_pc == restart_addr) { - if (retval == -ERESTARTNOHAND || - retval == -ERESTART_RESTARTBLOCK + if (retval == -ERESTARTNOHAND || (retval == -ERESTARTSYS && !(ka.sa.sa_flags & SA_RESTART))) { regs->ARM_r0 = -EINTR; regs->ARM_pc = continue_addr; } - clear_thread_flag(TIF_SYSCALL_RESTARTSYS); } handle_signal(signr, &ka, &info, regs); @@ -632,8 +645,29 @@ static void do_signal(struct pt_regs *regs, int syscall) * ignore the restart. */ if (retval == -ERESTART_RESTARTBLOCK - && regs->ARM_pc == restart_addr) - set_thread_flag(TIF_SYSCALL_RESTARTSYS); + && regs->ARM_pc == continue_addr) { + if (thumb_mode(regs)) { + regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; + regs->ARM_pc -= 2; + } else { +#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT) + regs->ARM_r7 = __NR_restart_syscall; + regs->ARM_pc -= 4; +#else + u32 __user *usp; + + regs->ARM_sp -= 4; + usp = (u32 __user *)regs->ARM_sp; + + if (put_user(regs->ARM_pc, usp) == 0) { + regs->ARM_pc = KERN_RESTART_CODE; + } else { + regs->ARM_sp += 4; + force_sigsegv(0, current); + } +#endif + } + } } restore_saved_sigmask(); diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 5ff067b7c752..6fcfe8398aa4 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -8,5 +8,7 @@ * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) +#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; +extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 4928d89758f4..3647170e9a16 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -820,6 +820,8 @@ void __init early_trap_init(void *vectors_base) */ memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), sigreturn_codes, sizeof(sigreturn_codes)); + memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE), + syscall_restart_code, sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 43a31fb06318..36ff15bbfdd4 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -183,7 +183,9 @@ SECTIONS } #endif +#ifdef CONFIG_SMP PERCPU_SECTION(L1_CACHE_BYTES) +#endif #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 19505c0a3f01..c8050b14e615 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -29,12 +29,16 @@ comment "Atmel AT91 Processor" config SOC_AT91SAM9 bool select CPU_ARM926T + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select AT91_SAM9_TIME select AT91_SAM9_SMC config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 @@ -140,6 +144,8 @@ config ARCH_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" depends on !MMU + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 9e84fe4f2aaa..30bb7332e30b 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -15,7 +15,9 @@ endif # Keep dtb files sorted alphabetically for each SoC # sam9260 +dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb # sam9263 diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 26917687fc30..6f50c6722276 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -17,6 +17,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91rm9200.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index e6b7d0533dd7..01fb7325fecc 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -41,8 +41,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_UHP, - .end = AT91RM9200_ID_UHP, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -94,8 +94,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_UDP, - .end = AT91RM9200_ID_UDP, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -145,8 +145,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_EMAC, - .end = AT91RM9200_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -305,8 +305,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_MCI, - .end = AT91RM9200_ID_MCI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -488,8 +488,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TWI, - .end = AT91RM9200_ID_TWI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -532,8 +532,8 @@ static struct resource spi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SPI, - .end = AT91RM9200_ID_SPI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -598,18 +598,18 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TC0, - .end = AT91RM9200_ID_TC0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91RM9200_ID_TC1, - .end = AT91RM9200_ID_TC1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91RM9200_ID_TC2, - .end = AT91RM9200_ID_TC2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -628,18 +628,18 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TC3, - .end = AT91RM9200_ID_TC3, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91RM9200_ID_TC4, - .end = AT91RM9200_ID_TC4, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91RM9200_ID_TC5, - .end = AT91RM9200_ID_TC5, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, .flags = IORESOURCE_IRQ, }, }; @@ -673,8 +673,8 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -729,8 +729,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC0, - .end = AT91RM9200_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -771,8 +771,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC1, - .end = AT91RM9200_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -813,8 +813,8 @@ static struct resource ssc2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC2, - .end = AT91RM9200_ID_SSC2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, .flags = IORESOURCE_IRQ, }, }; @@ -897,8 +897,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -935,8 +935,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US0, - .end = AT91RM9200_ID_US0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -984,8 +984,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US1, - .end = AT91RM9200_ID_US1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1035,8 +1035,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US2, - .end = AT91RM9200_ID_US2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1078,8 +1078,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US3, - .end = AT91RM9200_ID_US3, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US3, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 2b1e438ed878..30c7f26a4668 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -20,6 +20,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 0ded951f785a..7b9c2ba396ed 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -45,8 +45,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_UHP, - .end = AT91SAM9260_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -98,8 +98,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_UDP, - .end = AT91SAM9260_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -149,8 +149,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_EMAC, - .end = AT91SAM9260_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -223,8 +223,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_MCI, - .end = AT91SAM9260_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -305,8 +305,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_MCI, - .end = AT91SAM9260_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -496,8 +496,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TWI, - .end = AT91SAM9260_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -540,8 +540,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SPI0, - .end = AT91SAM9260_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -566,8 +566,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SPI1, - .end = AT91SAM9260_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -652,18 +652,18 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TC0, - .end = AT91SAM9260_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9260_ID_TC1, - .end = AT91SAM9260_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9260_ID_TC2, - .end = AT91SAM9260_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -682,18 +682,18 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TC3, - .end = AT91SAM9260_ID_TC3, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9260_ID_TC4, - .end = AT91SAM9260_ID_TC4, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9260_ID_TC5, - .end = AT91SAM9260_ID_TC5, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, .flags = IORESOURCE_IRQ, }, }; @@ -807,8 +807,8 @@ static struct resource ssc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SSC, - .end = AT91SAM9260_ID_SSC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, .flags = IORESOURCE_IRQ, }, }; @@ -882,8 +882,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -920,8 +920,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US0, - .end = AT91SAM9260_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -971,8 +971,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US1, - .end = AT91SAM9260_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1014,8 +1014,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US2, - .end = AT91SAM9260_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1057,8 +1057,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US3, - .end = AT91SAM9260_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, .flags = IORESOURCE_IRQ, }, }; @@ -1100,8 +1100,8 @@ static struct resource uart4_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US4, - .end = AT91SAM9260_ID_US4, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, .flags = IORESOURCE_IRQ, }, }; @@ -1138,8 +1138,8 @@ static struct resource uart5_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US5, - .end = AT91SAM9260_ID_US5, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, .flags = IORESOURCE_IRQ, }, }; @@ -1357,8 +1357,8 @@ static struct resource adc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_ADC, - .end = AT91SAM9260_ID_ADC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index c77d503d09d1..f40762c5fede 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -19,6 +19,7 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9295e90b08ff..8df5c1bdff92 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -45,8 +45,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_UHP, - .end = AT91SAM9261_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -98,8 +98,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_UDP, - .end = AT91SAM9261_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -148,8 +148,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_MCI, - .end = AT91SAM9261_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -310,8 +310,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_TWI, - .end = AT91SAM9261_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -354,8 +354,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SPI0, - .end = AT91SAM9261_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -380,8 +380,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SPI1, - .end = AT91SAM9261_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -468,8 +468,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_LCDC, - .end = AT91SAM9261_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, .flags = IORESOURCE_IRQ, }, #if defined(CONFIG_FB_INTSRAM) @@ -566,18 +566,18 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_TC0, - .end = AT91SAM9261_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9261_ID_TC1, - .end = AT91SAM9261_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9261_ID_TC2, - .end = AT91SAM9261_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -689,8 +689,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC0, - .end = AT91SAM9261_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -731,8 +731,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC1, - .end = AT91SAM9261_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -773,8 +773,8 @@ static struct resource ssc2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC2, - .end = AT91SAM9261_ID_SSC2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, .flags = IORESOURCE_IRQ, }, }; @@ -857,8 +857,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -895,8 +895,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US0, - .end = AT91SAM9261_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -938,8 +938,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US1, - .end = AT91SAM9261_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -981,8 +981,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US2, - .end = AT91SAM9261_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index ed91c7e9f7c2..84b38105231e 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -18,6 +18,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 175e0009eaa9..eb6bbf86fb9f 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -44,8 +44,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UHP, - .end = AT91SAM9263_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -104,8 +104,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UDP, - .end = AT91SAM9263_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -155,8 +155,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_EMAC, - .end = AT91SAM9263_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -229,8 +229,8 @@ static struct resource mmc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI0, - .end = AT91SAM9263_ID_MCI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, .flags = IORESOURCE_IRQ, }, }; @@ -254,8 +254,8 @@ static struct resource mmc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI1, - .end = AT91SAM9263_ID_MCI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, .flags = IORESOURCE_IRQ, }, }; @@ -567,8 +567,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TWI, - .end = AT91SAM9263_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -611,8 +611,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI0, - .end = AT91SAM9263_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -637,8 +637,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI1, - .end = AT91SAM9263_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -725,8 +725,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_AC97C, - .end = AT91SAM9263_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -776,8 +776,8 @@ static struct resource can_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_CAN, - .end = AT91SAM9263_ID_CAN, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, .flags = IORESOURCE_IRQ, }, }; @@ -816,8 +816,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_LCDC, - .end = AT91SAM9263_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -883,8 +883,8 @@ struct resource isi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_ISI, - .end = AT91SAM9263_ID_ISI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, .flags = IORESOURCE_IRQ, }, }; @@ -940,8 +940,8 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TCB, - .end = AT91SAM9263_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1108,8 +1108,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_PWMC, - .end = AT91SAM9263_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -1161,8 +1161,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC0, - .end = AT91SAM9263_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -1203,8 +1203,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC1, - .end = AT91SAM9263_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -1284,8 +1284,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1322,8 +1322,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US0, - .end = AT91SAM9263_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1365,8 +1365,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US1, - .end = AT91SAM9263_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1408,8 +1408,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US2, - .end = AT91SAM9263_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index a94758b42737..ffc0957d7623 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -137,7 +137,7 @@ static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91sam926x_pit_interrupt, - .irq = AT91_ID_SYS, + .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; static void at91sam926x_pit_reset(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 4792682d52b9..977127368a7d 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,6 +18,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9g45.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 933fc9afe7d0..40fb79df2de0 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -53,8 +53,8 @@ static struct resource hdmac_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_DMA, - .end = AT91SAM9G45_ID_DMA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, .flags = IORESOURCE_IRQ, }, }; @@ -94,8 +94,8 @@ static struct resource usbh_ohci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_UHPHS, - .end = AT91SAM9G45_ID_UHPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, .flags = IORESOURCE_IRQ, }, }; @@ -156,8 +156,8 @@ static struct resource usbh_ehci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_UHPHS, - .end = AT91SAM9G45_ID_UHPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, .flags = IORESOURCE_IRQ, }, }; @@ -213,8 +213,8 @@ static struct resource usba_udc_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9G45_ID_UDPHS, - .end = AT91SAM9G45_ID_UDPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, .flags = IORESOURCE_IRQ, }, }; @@ -296,8 +296,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_EMAC, - .end = AT91SAM9G45_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -370,8 +370,8 @@ static struct resource mmc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_MCI0, - .end = AT91SAM9G45_ID_MCI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, .flags = IORESOURCE_IRQ, }, }; @@ -395,8 +395,8 @@ static struct resource mmc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_MCI1, - .end = AT91SAM9G45_ID_MCI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, .flags = IORESOURCE_IRQ, }, }; @@ -645,8 +645,8 @@ static struct resource twi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TWI0, - .end = AT91SAM9G45_ID_TWI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, .flags = IORESOURCE_IRQ, }, }; @@ -665,8 +665,8 @@ static struct resource twi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TWI1, - .end = AT91SAM9G45_ID_TWI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, .flags = IORESOURCE_IRQ, }, }; @@ -720,8 +720,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SPI0, - .end = AT91SAM9G45_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -746,8 +746,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SPI1, - .end = AT91SAM9G45_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -834,8 +834,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AC97C, - .end = AT91SAM9G45_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -887,8 +887,8 @@ struct resource isi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_ISI, - .end = AT91SAM9G45_ID_ISI, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, .flags = IORESOURCE_IRQ, }, }; @@ -979,8 +979,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_LCDC, - .end = AT91SAM9G45_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -1054,8 +1054,8 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TCB, - .end = AT91SAM9G45_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1075,8 +1075,8 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TCB, - .end = AT91SAM9G45_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1110,8 +1110,8 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1147,8 +1147,8 @@ static struct resource tsadcc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TSC, - .end = AT91SAM9G45_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -1197,8 +1197,8 @@ static struct resource adc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TSC, - .end = AT91SAM9G45_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -1400,8 +1400,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_PWMC, - .end = AT91SAM9G45_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -1453,8 +1453,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SSC0, - .end = AT91SAM9G45_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -1495,8 +1495,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SSC1, - .end = AT91SAM9G45_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -1575,8 +1575,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1613,8 +1613,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US0, - .end = AT91SAM9G45_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1656,8 +1656,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US1, - .end = AT91SAM9G45_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1699,8 +1699,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US2, - .end = AT91SAM9G45_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1742,8 +1742,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US3, - .end = AT91SAM9G45_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index e420085a57ef..72ce50a50de5 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -19,6 +19,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 9c0b1481a9a7..f09fff932172 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -41,8 +41,8 @@ static struct resource hdmac_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9RL_ID_DMA, - .end = AT91SAM9RL_ID_DMA, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, .flags = IORESOURCE_IRQ, }, }; @@ -84,8 +84,8 @@ static struct resource usba_udc_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9RL_ID_UDPHS, - .end = AT91SAM9RL_ID_UDPHS, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, .flags = IORESOURCE_IRQ, }, }; @@ -172,8 +172,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_MCI, - .end = AT91SAM9RL_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -339,8 +339,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TWI0, - .end = AT91SAM9RL_ID_TWI0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, .flags = IORESOURCE_IRQ, }, }; @@ -383,8 +383,8 @@ static struct resource spi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SPI, - .end = AT91SAM9RL_ID_SPI, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -452,8 +452,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_AC97C, - .end = AT91SAM9RL_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -507,8 +507,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_LCDC, - .end = AT91SAM9RL_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -574,18 +574,18 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TC0, - .end = AT91SAM9RL_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9RL_ID_TC1, - .end = AT91SAM9RL_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9RL_ID_TC2, - .end = AT91SAM9RL_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -621,8 +621,8 @@ static struct resource tsadcc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TSC, - .end = AT91SAM9RL_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -768,8 +768,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_PWMC, - .end = AT91SAM9RL_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -821,8 +821,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SSC0, - .end = AT91SAM9RL_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -863,8 +863,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SSC1, - .end = AT91SAM9RL_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -943,8 +943,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -981,8 +981,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US0, - .end = AT91SAM9RL_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1032,8 +1032,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US1, - .end = AT91SAM9RL_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1075,8 +1075,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US2, - .end = AT91SAM9RL_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1118,8 +1118,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US3, - .end = AT91SAM9RL_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 1b144b4d3ce1..477cf9d06672 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -312,8 +312,6 @@ static void __init at91sam9x5_map_io(void) void __init at91sam9x5_initialize(void) { - at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); - /* Register GPIO subsystem (using DT) */ at91_gpio_init(NULL, 0); } @@ -321,47 +319,9 @@ void __init at91sam9x5_initialize(void) /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A and B */ - 1, /* Parallel IO Controller C and D */ - 4, /* Soft Modem */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 5, /* USART 3 */ - 6, /* Two-Wire Interface 0 */ - 6, /* Two-Wire Interface 1 */ - 6, /* Two-Wire Interface 2 */ - 0, /* Multimedia Card Interface 0 */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 5, /* UART 0 */ - 5, /* UART 1 */ - 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ - 0, /* Pulse Width Modulation Controller */ - 0, /* ADC Controller */ - 0, /* DMA Controller 0 */ - 0, /* DMA Controller 1 */ - 2, /* USB Host High Speed port */ - 2, /* USB Device High speed port */ - 3, /* Ethernet MAC 0 */ - 3, /* LDC Controller or Image Sensor Interface */ - 0, /* Multimedia Card Interface 1 */ - 3, /* Ethernet MAC 1 */ - 4, /* Synchronous Serial Interface */ - 4, /* CAN Controller 0 */ - 4, /* CAN Controller 1 */ - 0, /* Advanced Interrupt Controller (IRQ0) */ -}; struct at91_init_soc __initdata at91sam9x5_soc = { .map_io = at91sam9x5_map_io, - .default_irq_priority = at91sam9x5_default_irq_priority, .register_clocks = at91sam9x5_register_clocks, .init = at91sam9x5_initialize, }; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index d62fe090d814..46090e642d8e 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -13,10 +13,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/io.h> #include <asm/proc-fns.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> +#include <mach/at91_aic.h> #include <mach/at91_st.h> #include <mach/timex.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 271f994314a4..22d8856094f1 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -36,6 +36,7 @@ #include <mach/board.h> #include <mach/cpu.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -91,6 +92,7 @@ MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = onearm_init_early, .init_irq = at91_init_irq_default, .init_machine = onearm_board_init, diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index b7d8aa7b81e6..de7be1931817 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -44,6 +44,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -212,6 +213,7 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = afeb9260_init_early, .init_irq = at91_init_irq_default, .init_machine = afeb9260_board_init, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 29d3ef0a50fb..477e708497bc 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -39,6 +39,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -188,6 +189,7 @@ MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cam60_init_early, .init_irq = at91_init_irq_default, .init_machine = cam60_board_init, diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 44328a6d4609..a5b002f32a61 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -36,6 +36,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -158,6 +159,7 @@ MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = carmeva_init_early, .init_irq = at91_init_irq_default, .init_machine = carmeva_board_init, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 69951ec7dbf3..ecbc13b594de 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> @@ -376,6 +377,7 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cpu9krea_init_early, .init_irq = at91_init_irq_default, .init_machine = cpu9krea_board_init, diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 895cf2dba612..2e6d043c82f2 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -37,6 +37,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> @@ -178,6 +179,7 @@ MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cpuat91_init_early, .init_irq = at91_init_irq_default, .init_machine = cpuat91_board_init, diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index cd813361cd26..462bc319cbc5 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -39,6 +39,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -252,6 +253,7 @@ MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = csb337_init_early, .init_irq = at91_init_irq_default, .init_machine = csb337_board_init, diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 7c8b05a57d7f..872871ab1160 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -36,6 +36,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -133,6 +134,7 @@ MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = csb637_init_early, .init_irq = at91_init_irq_default, .init_machine = csb637_board_init, diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index a1fce05aa7a5..e8f45c4e0ea8 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -16,6 +16,7 @@ #include <linux/of_platform.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <asm/setup.h> #include <asm/irq.h> @@ -53,6 +54,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, .init_irq = at91_dt_init_irq, .init_machine = at91_dt_device_init, diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d2023f27c652..01f66e99ece7 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -28,6 +28,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" static void __init at91eb01_init_irq(void) @@ -43,6 +44,7 @@ static void __init at91eb01_init_early(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, + .handle_irq = at91_aic_handle_irq, .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index bd1017297989..d1e1f3fc0a47 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -36,6 +36,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -118,6 +119,7 @@ static void __init eb9200_board_init(void) MACHINE_START(ATEB9200, "Embest ATEB9200") .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = eb9200_init_early, .init_irq = at91_init_irq_default, .init_machine = eb9200_board_init, diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 89cc3726a9ce..9c24cb25707c 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -39,6 +39,7 @@ #include <mach/board.h> #include <mach/cpu.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -170,6 +171,7 @@ MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ecb_at91init_early, .init_irq = at91_init_irq_default, .init_machine = ecb_at91board_init, diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 558546cf63f4..82bdfde3405f 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -25,6 +25,7 @@ #include <asm/mach/map.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> @@ -132,6 +133,7 @@ MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = eco920_init_early, .init_irq = at91_init_irq_default, .init_machine = eco920_board_init, diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 47658f78105d..6cc83a87d77c 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -34,6 +34,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -160,6 +161,7 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = flexibity_init_early, .init_irq = at91_init_irq_default, .init_machine = flexibity_board_init, diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 33411e6ecb1f..69ab1247ef81 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -42,6 +42,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -262,6 +263,7 @@ MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = foxg20_init_early, .init_irq = at91_init_irq_default, .init_machine = foxg20_board_init, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 3e0dfa643a86..a9d5e78118c5 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/gsia18s.h> #include <mach/stamp9g20.h> @@ -575,6 +576,7 @@ static void __init gsia18s_board_init(void) MACHINE_START(GSIA18S, "GS_IA18_S") .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = gsia18s_init_early, .init_irq = at91_init_irq_default, .init_machine = gsia18s_board_init, diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index f260657f32bc..64c1dbf88a07 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,6 +35,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/cpu.h> #include "generic.h" @@ -93,6 +94,7 @@ MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = kafa_init_early, .init_irq = at91_init_irq_default, .init_machine = kafa_board_init, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index ba39db5482b9..5d96cb85175f 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -37,6 +37,7 @@ #include <mach/board.h> #include <mach/cpu.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -133,6 +134,7 @@ MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = kb9202_init_early, .init_irq = at91_init_irq_default, .init_machine = kb9202_board_init, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index d2f4cc161766..18103c5d993c 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -378,6 +379,7 @@ MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = neocore926_init_early, .init_irq = at91_init_irq_default, .init_machine = neocore926_board_init, diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 7fe638342421..9ca3e32c54cb 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -30,6 +30,7 @@ #include <asm/mach/arch.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/stamp9g20.h> @@ -218,6 +219,7 @@ MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = pcontrol_g20_init_early, .init_irq = at91_init_irq_default, .init_machine = pcontrol_g20_board_init, diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index b45c0a5d5ca7..127065504508 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -38,6 +38,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -120,6 +121,7 @@ MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = picotux200_init_early, .init_irq = at91_init_irq_default, .init_machine = picotux200_board_init, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 0c61bf0d272c..bf351e285422 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -258,6 +259,7 @@ MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index afd7a4713766..cc2bf9796073 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -40,6 +40,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -223,6 +224,7 @@ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = dk_init_early, .init_irq = at91_init_irq_default, .init_machine = dk_board_init, diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 2b15b8adec4c..62e19e64c9d3 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -40,6 +40,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -190,6 +191,7 @@ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index 24ab9be7510f..c3b43aefdb75 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -26,6 +26,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <linux/gpio.h> @@ -225,6 +226,7 @@ MACHINE_START(RSI_EWS, "RSI EWS") /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = rsi_ews_init_early, .init_irq = at91_init_irq_default, .init_machine = rsi_ews_board_init, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index cdd21f2595d2..7bf6da70d7d5 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -38,6 +38,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -202,6 +203,7 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 7b3c3913551a..889c1bf71eb5 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -42,6 +42,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -344,6 +345,7 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 2736453821b0..2269be5fa384 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -46,6 +46,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -615,6 +616,7 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 983cb98d2465..82adf581afc2 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -443,6 +444,7 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 6860d3451100..4ea4ee00364b 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -44,6 +44,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> @@ -413,6 +414,7 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -422,6 +424,7 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 63163dc7df46..3d48ec154685 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -43,6 +43,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -503,6 +504,7 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index be3239f13daa..e7dc3ead7045 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -31,6 +31,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -319,6 +320,7 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 9d446f1bb45f..a4e031a039fd 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -33,6 +33,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -178,6 +179,7 @@ static void __init snapper9260_board_init(void) MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = snapper9260_init_early, .init_irq = at91_init_irq_default, .init_machine = snapper9260_board_init, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index ee86f9d7ee72..29eae1626bf7 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -287,6 +288,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = portuxg20_board_init, @@ -296,6 +298,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = stamp9g20evb_board_init, diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 95393fcaf199..c1476b9fe7b9 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -42,6 +42,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -358,6 +359,7 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -367,6 +369,7 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -376,6 +379,7 @@ MACHINE_START(USB_A9G20, "CALAO USB_A92G0") /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index d56665ea4b55..516d340549d8 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -44,6 +44,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> @@ -590,6 +591,7 @@ MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = yl9200_init_early, .init_irq = at91_init_irq_default, .init_machine = yl9200_board_init, diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0a60bf837037..f49650677653 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -29,6 +29,8 @@ extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); +extern int __init at91_aic5_of_init(struct device_node *node, + struct device_node *parent); /* Timer */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 325837a264c9..be42cf0e74bd 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -26,6 +26,8 @@ #include <linux/of_irq.h> #include <linux/of_gpio.h> +#include <asm/mach/irq.h> + #include <mach/hardware.h> #include <mach/at91_pio.h> @@ -585,15 +587,14 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_desc_get_chip(desc); struct irq_data *idata = irq_desc_get_irq_data(desc); - struct irq_chip *chip = irq_data_get_irq_chip(idata); struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); void __iomem *pio = at91_gpio->regbase; unsigned long isr; int n; - /* temporarily mask (level sensitive) parent IRQ */ - chip->irq_ack(idata); + chained_irq_enter(chip, desc); for (;;) { /* Reading ISR acks pending (edge triggered) GPIO interrupts. * When there none are pending, we're finished unless we need @@ -614,7 +615,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) n = find_next_bit(&isr, BITS_PER_LONG, n + 1); } } - chip->irq_unmask(idata); + chained_irq_exit(chip, desc); /* now it may re-trigger */ } diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h index 3045781c473f..eaea66197fa1 100644 --- a/arch/arm/mach-at91/include/mach/at91_aic.h +++ b/arch/arm/mach-at91/include/mach/at91_aic.h @@ -23,12 +23,23 @@ extern void __iomem *at91_aic_base; __raw_readl(at91_aic_base + field) #define at91_aic_write(field, value) \ - __raw_writel(value, at91_aic_base + field); + __raw_writel(value, at91_aic_base + field) #else .extern at91_aic_base #endif +/* Number of irq lines managed by AIC */ +#define NR_AIC_IRQS 32 +#define NR_AIC5_IRQS 128 + +#define AT91_AIC5_SSR 0x0 /* Source Select Register [AIC5] */ +#define AT91_AIC5_INTSEL_MSK (0x7f << 0) /* Interrupt Line Selection Mask */ + +#define AT91_AIC_IRQ_MIN_PRIORITY 0 +#define AT91_AIC_IRQ_MAX_PRIORITY 7 + #define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */ +#define AT91_AIC5_SMR 0x4 /* Source Mode Register [AIC5] */ #define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ #define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ #define AT91_AIC_SRCTYPE_LOW (0 << 5) @@ -37,29 +48,52 @@ extern void __iomem *at91_aic_base; #define AT91_AIC_SRCTYPE_RISING (3 << 5) #define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ +#define AT91_AIC5_SVR 0x8 /* Source Vector Register [AIC5] */ #define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */ +#define AT91_AIC5_IVR 0x10 /* Interrupt Vector Register [AIC5] */ #define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */ +#define AT91_AIC5_FVR 0x14 /* Fast Interrupt Vector Register [AIC5] */ #define AT91_AIC_ISR 0x108 /* Interrupt Status Register */ +#define AT91_AIC5_ISR 0x18 /* Interrupt Status Register [AIC5] */ #define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ #define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */ +#define AT91_AIC5_IPR0 0x20 /* Interrupt Pending Register 0 [AIC5] */ +#define AT91_AIC5_IPR1 0x24 /* Interrupt Pending Register 1 [AIC5] */ +#define AT91_AIC5_IPR2 0x28 /* Interrupt Pending Register 2 [AIC5] */ +#define AT91_AIC5_IPR3 0x2c /* Interrupt Pending Register 3 [AIC5] */ #define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */ +#define AT91_AIC5_IMR 0x30 /* Interrupt Mask Register [AIC5] */ #define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */ +#define AT91_AIC5_CISR 0x34 /* Core Interrupt Status Register [AIC5] */ #define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ #define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ #define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */ +#define AT91_AIC5_IECR 0x40 /* Interrupt Enable Command Register [AIC5] */ #define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */ +#define AT91_AIC5_IDCR 0x44 /* Interrupt Disable Command Register [AIC5] */ #define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */ +#define AT91_AIC5_ICCR 0x48 /* Interrupt Clear Command Register [AIC5] */ #define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */ +#define AT91_AIC5_ISCR 0x4c /* Interrupt Set Command Register [AIC5] */ #define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */ +#define AT91_AIC5_EOICR 0x38 /* End of Interrupt Command Register [AIC5] */ #define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */ +#define AT91_AIC5_SPU 0x3c /* Spurious Interrupt Vector Register [AIC5] */ #define AT91_AIC_DCR 0x138 /* Debug Control Register */ +#define AT91_AIC5_DCR 0x6c /* Debug Control Register [AIC5] */ #define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ #define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ #define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */ +#define AT91_AIC5_FFER 0x50 /* Fast Forcing Enable Register [AIC5] */ #define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */ +#define AT91_AIC5_FFDR 0x54 /* Fast Forcing Disable Register [AIC5] */ #define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */ +#define AT91_AIC5_FFSR 0x58 /* Fast Forcing Status Register [AIC5] */ + +void at91_aic_handle_irq(struct pt_regs *regs); +void at91_aic5_handle_irq(struct pt_regs *regs); #endif diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h deleted file mode 100644 index 2f6ba0c5636e..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_spi.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_spi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Serial Peripheral Interface (SPI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SPI_H -#define AT91_SPI_H - -#define AT91_SPI_CR 0x00 /* Control Register */ -#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ -#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ -#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_MR 0x04 /* Mode Register */ -#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ -#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ -#define AT91_SPI_PS_FIXED (0 << 1) -#define AT91_SPI_PS_VARIABLE (1 << 1) -#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ -#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ -#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ -#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ - -#define AT91_SPI_RDR 0x08 /* Receive Data Register */ -#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ - -#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ -#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_SR 0x10 /* Status Register */ -#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ -#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ -#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ -#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ -#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ -#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ -#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ -#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ -#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ -#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ -#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ - -#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ -#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ -#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ - -#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ -#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ -#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ -#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ -#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ -#define AT91_SPI_BITS_8 (0 << 4) -#define AT91_SPI_BITS_9 (1 << 4) -#define AT91_SPI_BITS_10 (2 << 4) -#define AT91_SPI_BITS_11 (3 << 4) -#define AT91_SPI_BITS_12 (4 << 4) -#define AT91_SPI_BITS_13 (5 << 4) -#define AT91_SPI_BITS_14 (6 << 4) -#define AT91_SPI_BITS_15 (7 << 4) -#define AT91_SPI_BITS_16 (8 << 4) -#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ -#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ -#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h deleted file mode 100644 index a81114c11c74..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_ssc.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_ssc.h - * - * Copyright (C) SAN People - * - * Serial Synchronous Controller (SSC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SSC_H -#define AT91_SSC_H - -#define AT91_SSC_CR 0x00 /* Control Register */ -#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ -#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */ -#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */ -#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */ -#define AT91_SSC_SWRST (1 << 15) /* Software Reset */ - -#define AT91_SSC_CMR 0x04 /* Clock Mode Register */ -#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */ - -#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */ -#define AT91_SSC_CKS (3 << 0) /* Clock Selection */ -#define AT91_SSC_CKS_DIV (0 << 0) -#define AT91_SSC_CKS_CLOCK (1 << 0) -#define AT91_SSC_CKS_PIN (2 << 0) -#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */ -#define AT91_SSC_CKO_NONE (0 << 2) -#define AT91_SSC_CKO_CONTINUOUS (1 << 2) -#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ -#define AT91_SSC_CKI_FALLING (0 << 5) -#define AT91_SSC_CK_RISING (1 << 5) -#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */ -#define AT91_SSC_CKG_NONE (0 << 6) -#define AT91_SSC_CKG_RFLOW (1 << 6) -#define AT91_SSC_CKG_RFHIGH (2 << 6) -#define AT91_SSC_START (0xf << 8) /* Start Selection */ -#define AT91_SSC_START_CONTINUOUS (0 << 8) -#define AT91_SSC_START_TX_RX (1 << 8) -#define AT91_SSC_START_LOW_RF (2 << 8) -#define AT91_SSC_START_HIGH_RF (3 << 8) -#define AT91_SSC_START_FALLING_RF (4 << 8) -#define AT91_SSC_START_RISING_RF (5 << 8) -#define AT91_SSC_START_LEVEL_RF (6 << 8) -#define AT91_SSC_START_EDGE_RF (7 << 8) -#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */ -#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ -#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ - -#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */ -#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */ -#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */ -#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */ -#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */ -#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */ -#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */ -#define AT91_SSC_FSOS_NONE (0 << 20) -#define AT91_SSC_FSOS_NEGATIVE (1 << 20) -#define AT91_SSC_FSOS_POSITIVE (2 << 20) -#define AT91_SSC_FSOS_LOW (3 << 20) -#define AT91_SSC_FSOS_HIGH (4 << 20) -#define AT91_SSC_FSOS_TOGGLE (5 << 20) -#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */ -#define AT91_SSC_FSEDGE_POSITIVE (0 << 24) -#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24) - -#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */ -#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */ -#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */ -#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */ - -#define AT91_SSC_RHR 0x20 /* Receive Holding Register */ -#define AT91_SSC_THR 0x24 /* Transmit Holding Register */ -#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ -#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ - -#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */ -#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */ - -#define AT91_SSC_SR 0x40 /* Status Register */ -#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ -#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ -#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */ -#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */ -#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */ -#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ -#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ -#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ -#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */ -#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */ -#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ -#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ -#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ -#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */ - -#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */ -#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S deleted file mode 100644 index 903bf205a333..000000000000 --- a/arch/arm/mach-at91/include/mach/entry-macro.S +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/entry-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Low-level IRQ helper macros for AT91RM9200 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/hardware.h> -#include <mach/at91_aic.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =at91_aic_base @ base virtual address of AIC peripheral - ldr \base, [\base] - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) - ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number - teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt - streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now. - .endm - diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h deleted file mode 100644 index ac8b7dfc85ef..000000000000 --- a/arch/arm/mach-at91/include/mach/irqs.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/irqs.h - * - * Copyright (C) 2004 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include <linux/io.h> -#include <mach/at91_aic.h> - -#define NR_AIC_IRQS 32 - - -/* - * Acknowledge interrupt with AIC after interrupt has been handled. - * (by kernel/irq.c) - */ -#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0) - - -/* - * IRQ interrupt symbols are the AT91xxx_ID_* symbols - * for IRQs handled directly through the AIC, or else the AT91_PIN_* - * symbols in gpio.h for ones handled indirectly as GPIOs. - * We make provision for 5 banks of GPIO. - */ -#define NR_IRQS (NR_AIC_IRQS + (5 * 32)) - -/* FIQ is AIC source 0. */ -#define FIQ_START AT91_ID_FIQ - -#endif diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index cfcfcbe36269..1e02c0e49dcc 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/mm.h> +#include <linux/bitmap.h> #include <linux/types.h> #include <linux/irq.h> #include <linux/of.h> @@ -30,38 +31,218 @@ #include <linux/of_irq.h> #include <linux/irqdomain.h> #include <linux/err.h> +#include <linux/slab.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/setup.h> +#include <asm/exception.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> +#include <mach/at91_aic.h> + void __iomem *at91_aic_base; static struct irq_domain *at91_aic_domain; static struct device_node *at91_aic_np; +static unsigned int n_irqs = NR_AIC_IRQS; +static unsigned long at91_aic_caps = 0; + +/* AIC5 introduces a Source Select Register */ +#define AT91_AIC_CAP_AIC5 (1 << 0) +#define has_aic5() (at91_aic_caps & AT91_AIC_CAP_AIC5) + +#ifdef CONFIG_PM + +static unsigned long *wakeups; +static unsigned long *backups; + +#define set_backup(bit) set_bit(bit, backups) +#define clear_backup(bit) clear_bit(bit, backups) + +static int at91_aic_pm_init(void) +{ + backups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); + if (!backups) + return -ENOMEM; + + wakeups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); + if (!wakeups) { + kfree(backups); + return -ENOMEM; + } + + return 0; +} + +static int at91_aic_set_wake(struct irq_data *d, unsigned value) +{ + if (unlikely(d->hwirq >= n_irqs)) + return -EINVAL; + + if (value) + set_bit(d->hwirq, wakeups); + else + clear_bit(d->hwirq, wakeups); + + return 0; +} + +void at91_irq_suspend(void) +{ + int i = 0, bit; + + if (has_aic5()) { + /* disable enabled irqs */ + while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + i = bit; + } + /* enable wakeup irqs */ + i = 0; + while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + i = bit; + } + } else { + at91_aic_write(AT91_AIC_IDCR, *backups); + at91_aic_write(AT91_AIC_IECR, *wakeups); + } +} + +void at91_irq_resume(void) +{ + int i = 0, bit; + + if (has_aic5()) { + /* disable wakeup irqs */ + while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + i = bit; + } + /* enable irqs disabled for suspend */ + i = 0; + while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + i = bit; + } + } else { + at91_aic_write(AT91_AIC_IDCR, *wakeups); + at91_aic_write(AT91_AIC_IECR, *backups); + } +} + +#else +static inline int at91_aic_pm_init(void) +{ + return 0; +} + +#define set_backup(bit) +#define clear_backup(bit) +#define at91_aic_set_wake NULL + +#endif /* CONFIG_PM */ + +asmlinkage void __exception_irq_entry +at91_aic_handle_irq(struct pt_regs *regs) +{ + u32 irqnr; + u32 irqstat; + + irqnr = at91_aic_read(AT91_AIC_IVR); + irqstat = at91_aic_read(AT91_AIC_ISR); + + /* + * ISR value is 0 when there is no current interrupt or when there is + * a spurious interrupt + */ + if (!irqstat) + at91_aic_write(AT91_AIC_EOICR, 0); + else + handle_IRQ(irqnr, regs); +} + +asmlinkage void __exception_irq_entry +at91_aic5_handle_irq(struct pt_regs *regs) +{ + u32 irqnr; + u32 irqstat; + + irqnr = at91_aic_read(AT91_AIC5_IVR); + irqstat = at91_aic_read(AT91_AIC5_ISR); + + if (!irqstat) + at91_aic_write(AT91_AIC5_EOICR, 0); + else + handle_IRQ(irqnr, regs); +} static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq); + /* Update ISR cache */ + clear_backup(d->hwirq); +} + +static void __maybe_unused at91_aic5_mask_irq(struct irq_data *d) +{ + /* Disable interrupt on AIC5 */ + at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + /* Update ISR cache */ + clear_backup(d->hwirq); } static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq); + /* Update ISR cache */ + set_backup(d->hwirq); +} + +static void __maybe_unused at91_aic5_unmask_irq(struct irq_data *d) +{ + /* Enable interrupt on AIC5 */ + at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + /* Update ISR cache */ + set_backup(d->hwirq); } -unsigned int at91_extern_irq; +static void at91_aic_eoi(struct irq_data *d) +{ + /* + * Mark end-of-interrupt on AIC, the controller doesn't care about + * the value written. Moreover it's a write-only register. + */ + at91_aic_write(AT91_AIC_EOICR, 0); +} + +static void __maybe_unused at91_aic5_eoi(struct irq_data *d) +{ + at91_aic_write(AT91_AIC5_EOICR, 0); +} -#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq) +unsigned long *at91_extern_irq; -static int at91_aic_set_type(struct irq_data *d, unsigned type) +#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq) + +static int at91_aic_compute_srctype(struct irq_data *d, unsigned type) { - unsigned int smr, srctype; + int srctype; switch (type) { case IRQ_TYPE_LEVEL_HIGH: @@ -74,65 +255,51 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_LOW; else - return -EINVAL; + srctype = -EINVAL; break; case IRQ_TYPE_EDGE_FALLING: if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_FALLING; else - return -EINVAL; + srctype = -EINVAL; break; default: - return -EINVAL; + srctype = -EINVAL; } - smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); - return 0; + return srctype; } -#ifdef CONFIG_PM - -static u32 wakeups; -static u32 backups; - -static int at91_aic_set_wake(struct irq_data *d, unsigned value) +static int at91_aic_set_type(struct irq_data *d, unsigned type) { - if (unlikely(d->hwirq >= NR_AIC_IRQS)) - return -EINVAL; - - if (value) - wakeups |= (1 << d->hwirq); - else - wakeups &= ~(1 << d->hwirq); + unsigned int smr; + int srctype; + + srctype = at91_aic_compute_srctype(d, type); + if (srctype < 0) + return srctype; + + if (has_aic5()) { + at91_aic_write(AT91_AIC5_SSR, + d->hwirq & AT91_AIC5_INTSEL_MSK); + smr = at91_aic_read(AT91_AIC5_SMR) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC5_SMR, smr | srctype); + } else { + smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) + & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); + } return 0; } -void at91_irq_suspend(void) -{ - backups = at91_aic_read(AT91_AIC_IMR); - at91_aic_write(AT91_AIC_IDCR, backups); - at91_aic_write(AT91_AIC_IECR, wakeups); -} - -void at91_irq_resume(void) -{ - at91_aic_write(AT91_AIC_IDCR, wakeups); - at91_aic_write(AT91_AIC_IECR, backups); -} - -#else -#define at91_aic_set_wake NULL -#endif - static struct irq_chip at91_aic_chip = { .name = "AIC", - .irq_ack = at91_aic_mask_irq, .irq_mask = at91_aic_mask_irq, .irq_unmask = at91_aic_unmask_irq, .irq_set_type = at91_aic_set_type, .irq_set_wake = at91_aic_set_wake, + .irq_eoi = at91_aic_eoi, }; static void __init at91_aic_hw_init(unsigned int spu_vector) @@ -161,41 +328,172 @@ static void __init at91_aic_hw_init(unsigned int spu_vector) at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); } +static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) +{ + int i; + + /* + * Perform 8 End Of Interrupt Command to make sure AIC + * will not Lock out nIRQ + */ + for (i = 0; i < 8; i++) + at91_aic_write(AT91_AIC5_EOICR, 0); + + /* + * Spurious Interrupt ID in Spurious Vector Register. + * When there is no current interrupt, the IRQ Vector Register + * reads the value stored in AIC_SPU + */ + at91_aic_write(AT91_AIC5_SPU, spu_vector); + + /* No debugging in AIC: Debug (Protect) Control Register */ + at91_aic_write(AT91_AIC5_DCR, 0); + + /* Disable and clear all interrupts initially */ + for (i = 0; i < n_irqs; i++) { + at91_aic_write(AT91_AIC5_SSR, i & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + at91_aic_write(AT91_AIC5_ICCR, 1); + } +} + #if defined(CONFIG_OF) +static unsigned int *at91_aic_irq_priorities; + static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { /* Put virq number in Source Vector Register */ at91_aic_write(AT91_AIC_SVR(hw), virq); - /* Active Low interrupt, without priority */ - at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW); + /* Active Low interrupt, with priority */ + at91_aic_write(AT91_AIC_SMR(hw), + AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq); + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); return 0; } +static int at91_aic5_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + at91_aic_write(AT91_AIC5_SSR, hw & AT91_AIC5_INTSEL_MSK); + + /* Put virq number in Source Vector Register */ + at91_aic_write(AT91_AIC5_SVR, virq); + + /* Active Low interrupt, with priority */ + at91_aic_write(AT91_AIC5_SMR, + AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); + + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) +{ + if (WARN_ON(intsize < 3)) + return -EINVAL; + if (WARN_ON(intspec[0] >= n_irqs)) + return -EINVAL; + if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY) + || (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY))) + return -EINVAL; + + *out_hwirq = intspec[0]; + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; + at91_aic_irq_priorities[*out_hwirq] = intspec[2]; + + return 0; +} + static struct irq_domain_ops at91_aic_irq_ops = { .map = at91_aic_irq_map, - .xlate = irq_domain_xlate_twocell, + .xlate = at91_aic_irq_domain_xlate, }; -int __init at91_aic_of_init(struct device_node *node, - struct device_node *parent) +int __init at91_aic_of_common_init(struct device_node *node, + struct device_node *parent) { + struct property *prop; + const __be32 *p; + u32 val; + + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + if (!at91_extern_irq) + return -ENOMEM; + + if (at91_aic_pm_init()) { + kfree(at91_extern_irq); + return -ENOMEM; + } + + at91_aic_irq_priorities = kzalloc(n_irqs + * sizeof(*at91_aic_irq_priorities), + GFP_KERNEL); + if (!at91_aic_irq_priorities) + return -ENOMEM; + at91_aic_base = of_iomap(node, 0); at91_aic_np = node; - at91_aic_domain = irq_domain_add_linear(at91_aic_np, NR_AIC_IRQS, + at91_aic_domain = irq_domain_add_linear(at91_aic_np, n_irqs, &at91_aic_irq_ops, NULL); if (!at91_aic_domain) panic("Unable to add AIC irq domain (DT)\n"); + of_property_for_each_u32(node, "atmel,external-irqs", prop, p, val) { + if (val >= n_irqs) + pr_warn("AIC: external irq %d >= %d skip it\n", + val, n_irqs); + else + set_bit(val, at91_extern_irq); + } + irq_set_default_host(at91_aic_domain); - at91_aic_hw_init(NR_AIC_IRQS); + return 0; +} + +int __init at91_aic_of_init(struct device_node *node, + struct device_node *parent) +{ + int err; + + err = at91_aic_of_common_init(node, parent); + if (err) + return err; + + at91_aic_hw_init(n_irqs); + + return 0; +} + +int __init at91_aic5_of_init(struct device_node *node, + struct device_node *parent) +{ + int err; + + at91_aic_caps |= AT91_AIC_CAP_AIC5; + n_irqs = NR_AIC5_IRQS; + at91_aic_chip.irq_ack = at91_aic5_mask_irq; + at91_aic_chip.irq_mask = at91_aic5_mask_irq; + at91_aic_chip.irq_unmask = at91_aic5_unmask_irq; + at91_aic_chip.irq_eoi = at91_aic5_eoi; + at91_aic_irq_ops.map = at91_aic5_irq_map; + + err = at91_aic_of_common_init(node, parent); + if (err) + return err; + + at91_aic5_hw_init(n_irqs); return 0; } @@ -204,22 +502,25 @@ int __init at91_aic_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) +void __init at91_aic_init(unsigned int *priority) { unsigned int i; int irq_base; + if (at91_aic_pm_init()) + panic("Unable to allocate bit maps\n"); + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); /* Add irq domain for AIC */ - irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0); + irq_base = irq_alloc_descs(-1, 0, n_irqs, 0); if (irq_base < 0) { WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n"); irq_base = 0; } - at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS, + at91_aic_domain = irq_domain_add_legacy(at91_aic_np, n_irqs, irq_base, 0, &irq_domain_simple_ops, NULL); @@ -232,15 +533,14 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) * The IVR is used by macro get_irqnr_and_base to read and verify. * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. */ - for (i = 0; i < NR_AIC_IRQS; i++) { + for (i = 0; i < n_irqs; i++) { /* Put hardware irq number in Source Vector Register: */ - at91_aic_write(AT91_AIC_SVR(i), i); + at91_aic_write(AT91_AIC_SVR(i), NR_IRQS_LEGACY + i); /* Active Low interrupt, with the specified priority */ at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); - - irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq); + irq_set_chip_and_handler(NR_IRQS_LEGACY + i, &at91_aic_chip, handle_fasteoi_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } - at91_aic_hw_init(NR_AIC_IRQS); + at91_aic_hw_init(n_irqs); } diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 1bfaad628731..2c2d86505a54 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -25,6 +25,7 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index c965fd8eb31a..f15293bd7974 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -26,7 +26,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/sched.h> -#include <linux/timex.h> #include <asm/sizes.h> #include <mach/hardware.h> @@ -188,7 +187,6 @@ static struct irqaction clps711x_timer_irq = { static void __init clps711x_timer_init(void) { - struct timespec tv; unsigned int syscon; syscon = clps_readl(SYSCON1); @@ -198,10 +196,6 @@ static void __init clps711x_timer_init(void) clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */ setup_irq(IRQ_TC2OI, &clps711x_timer_irq); - - tv.tv_nsec = 0; - tv.tv_sec = clps_readl(RTCDR); - do_settimeofday(&tv); } struct sys_timer clps711x_timer = { diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index 3a032a67725c..fc0e028d9405 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -25,26 +25,6 @@ */ #define PLAT_PHYS_OFFSET UL(0xc0000000) -#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12) - -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) -#define __pfn_to_bus(x) (__pfn_to_phys(x) - PHYS_OFFSET) -#define __bus_to_pfn(x) __phys_to_pfn((x) + PHYS_OFFSET) - -#endif - - -/* - * Like the SA1100, the EDB7211 has a large gap between physical RAM - * banks. In 2.2, the Psion (CL-PS7110) port added custom support for - * discontiguous physical memory. In 2.4, we can use the standard - * Linux NUMA support. - * - * This is not necessary for EP7211 implementations with only one used - * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM. - */ - /* * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 * uses only one of the two banks (bank #1). However, even within @@ -54,23 +34,6 @@ * them, so we use 24 for the node max shift to get 16MB node sizes. */ -/* - * Because of the wide memory address space between physical RAM banks on the - * SA1100, it's much more convenient to use Linux's NUMA support to implement - * our memory map representation. Assuming all memory nodes have equal access - * characteristics, we then have generic discontiguous memory support. - * - * Of course, all this isn't mandatory for SA1100 implementations with only - * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM. - * - * The nodes are matched with the physical memory bank addresses which are - * incidentally the same as virtual addresses. - * - * node 0: 0xc0000000 - 0xc7ffffff - * node 1: 0xc8000000 - 0xcfffffff - * node 2: 0xd0000000 - 0xd7ffffff - * node 3: 0xd8000000 - 0xdfffffff - */ #define SECTION_SIZE_BITS 24 #define MAX_PHYSMEM_BITS 32 diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 42ee8f33eafb..f266d90b9efc 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -86,17 +86,7 @@ static void __init p720t_map_io(void) iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); } -MACHINE_START(P720T, "ARM-Prospector720T") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .fixup = fixup_p720t, - .map_io = p720t_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END - -static int p720t_hw_init(void) +static void __init p720t_init_early(void) { /* * Power down as much as possible in case we don't @@ -111,13 +101,19 @@ static int p720t_hw_init(void) PLD_CODEC = 0; PLD_TCH = 0; PLD_SPI = 0; -#ifndef CONFIG_DEBUG_LL - PLD_COM2 = 0; - PLD_COM1 = 0; -#endif - - return 0; + if (!IS_ENABLED(CONFIG_DEBUG_LL)) { + PLD_COM2 = 0; + PLD_COM1 = 0; + } } -__initcall(p720t_hw_init); - +MACHINE_START(P720T, "ARM-Prospector720T") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .atag_offset = 0x100, + .fixup = fixup_p720t, + .init_early = p720t_init_early, + .map_io = p720t_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 32d837d8eab9..2ce1ef07c13d 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,6 +4,7 @@ config AINTC bool config CP_INTC + select IRQ_DOMAIN bool config ARCH_DAVINCI_DMx diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2db78bd5c835..2227effcb0e9 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -39,3 +39,4 @@ obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o +obj-$(CONFIG_HAVE_CLK) += pm_domain.o diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index f83152d643c5..006dae8dfe44 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -9,9 +9,14 @@ * kind, whether express or implied. */ +#include <linux/export.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <mach/common.h> #include <mach/cp_intc.h> @@ -28,7 +33,7 @@ static inline void cp_intc_write(unsigned long value, unsigned offset) static void cp_intc_ack_irq(struct irq_data *d) { - cp_intc_write(d->irq, CP_INTC_SYS_STAT_IDX_CLR); + cp_intc_write(d->hwirq, CP_INTC_SYS_STAT_IDX_CLR); } /* Disable interrupt */ @@ -36,20 +41,20 @@ static void cp_intc_mask_irq(struct irq_data *d) { /* XXX don't know why we need to disable nIRQ here... */ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR); - cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_CLR); + cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_CLR); cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); } /* Enable interrupt */ static void cp_intc_unmask_irq(struct irq_data *d) { - cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_SET); + cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_SET); } static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type) { - unsigned reg = BIT_WORD(d->irq); - unsigned mask = BIT_MASK(d->irq); + unsigned reg = BIT_WORD(d->hwirq); + unsigned mask = BIT_MASK(d->hwirq); unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg)); unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg)); @@ -99,18 +104,43 @@ static struct irq_chip cp_intc_irq_chip = { .irq_set_wake = cp_intc_set_wake, }; -void __init cp_intc_init(void) +static struct irq_domain *cp_intc_domain; + +static int cp_intc_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) { - unsigned long num_irq = davinci_soc_info.intc_irq_num; + pr_debug("cp_intc_host_map(%d, 0x%lx)\n", virq, hw); + + irq_set_chip(virq, &cp_intc_irq_chip); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + irq_set_handler(virq, handle_edge_irq); + return 0; +} + +static const struct irq_domain_ops cp_intc_host_ops = { + .map = cp_intc_host_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +int __init cp_intc_of_init(struct device_node *node, struct device_node *parent) +{ + u32 num_irq = davinci_soc_info.intc_irq_num; u8 *irq_prio = davinci_soc_info.intc_irq_prios; u32 *host_map = davinci_soc_info.intc_host_map; unsigned num_reg = BITS_TO_LONGS(num_irq); - int i; + int i, irq_base; davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC; - davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K); + if (node) { + davinci_intc_base = of_iomap(node, 0); + if (of_property_read_u32(node, "ti,intc-size", &num_irq)) + pr_warn("unable to get intc-size, default to %d\n", + num_irq); + } else { + davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K); + } if (WARN_ON(!davinci_intc_base)) - return; + return -EINVAL; cp_intc_write(0, CP_INTC_GLOBAL_ENABLE); @@ -165,13 +195,28 @@ void __init cp_intc_init(void) for (i = 0; host_map[i] != -1; i++) cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i)); - /* Set up genirq dispatching for cp_intc */ - for (i = 0; i < num_irq; i++) { - irq_set_chip(i, &cp_intc_irq_chip); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - irq_set_handler(i, handle_edge_irq); + irq_base = irq_alloc_descs(-1, 0, num_irq, 0); + if (irq_base < 0) { + pr_warn("Couldn't allocate IRQ numbers\n"); + irq_base = 0; + } + + /* create a legacy host */ + cp_intc_domain = irq_domain_add_legacy(node, num_irq, + irq_base, 0, &cp_intc_host_ops, NULL); + + if (!cp_intc_domain) { + pr_err("cp_intc: failed to allocate irq host!\n"); + return -EINVAL; } /* Enable global interrupt */ cp_intc_write(1, CP_INTC_GLOBAL_ENABLE); + + return 0; +} + +void __init cp_intc_init(void) +{ + cp_intc_of_init(NULL, NULL); } diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h index 4e8190eed673..d13d8dfa2b0d 100644 --- a/arch/arm/mach-davinci/include/mach/cp_intc.h +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -52,5 +52,6 @@ #define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) void __init cp_intc_init(void); +int __init cp_intc_of_init(struct device_node *, struct device_node *); #endif /* __ASM_HARDWARE_CP_INTC_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h deleted file mode 100644 index b9bf3d6a4423..000000000000 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ /dev/null @@ -1 +0,0 @@ -/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h deleted file mode 100644 index b9bf3d6a4423..000000000000 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ /dev/null @@ -1 +0,0 @@ -/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 768b3c060214..cf5f573eb5fd 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -30,12 +30,10 @@ #endif #if defined(CONFIG_CP_INTC) 1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + mov \tmp, \irqnr, lsr #31 and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ - mov \tmp, \irqnr, lsr #3 - and \tmp, \tmp, #0xfc - add \tmp, \tmp, #0x280 /* get the register offset */ - ldr \irqstat, [\base, \tmp] /* get the intc status */ - cmp \irqstat, #0x0 + and \tmp, \tmp, #0x1 + cmp \tmp, #0x1 #endif 1002: .endm diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c new file mode 100644 index 000000000000..00946e23c1ee --- /dev/null +++ b/arch/arm/mach-davinci/pm_domain.c @@ -0,0 +1,64 @@ +/* + * Runtime PM support code for DaVinci + * + * Author: Kevin Hilman + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/init.h> +#include <linux/pm_runtime.h> +#include <linux/pm_clock.h> +#include <linux/platform_device.h> + +#ifdef CONFIG_PM_RUNTIME +static int davinci_pm_runtime_suspend(struct device *dev) +{ + int ret; + + dev_dbg(dev, "%s\n", __func__); + + ret = pm_generic_runtime_suspend(dev); + if (ret) + return ret; + + ret = pm_clk_suspend(dev); + if (ret) { + pm_generic_runtime_resume(dev); + return ret; + } + + return 0; +} + +static int davinci_pm_runtime_resume(struct device *dev) +{ + dev_dbg(dev, "%s\n", __func__); + + pm_clk_resume(dev); + return pm_generic_runtime_resume(dev); +} +#endif + +static struct dev_pm_domain davinci_pm_domain = { + .ops = { + SET_RUNTIME_PM_OPS(davinci_pm_runtime_suspend, + davinci_pm_runtime_resume, NULL) + USE_PLATFORM_PM_SLEEP_OPS + }, +}; + +static struct pm_clk_notifier_block platform_bus_notifier = { + .pm_domain = &davinci_pm_domain, +}; + +static int __init davinci_pm_runtime_init(void) +{ + pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); + + return 0; +} +core_initcall(davinci_pm_runtime_init); diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index 226949dc4ac0..f953bb54aa9d 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -50,5 +50,6 @@ #define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #endif diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index ad1165d488c1..d52b0ef313b7 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -78,6 +78,7 @@ /* North-South Bridge */ #define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000) /* Cryptographic Engine */ #define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 4dd07a0e3604..4afe52aaaff3 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -797,6 +797,102 @@ static struct platform_device ep93xx_wdt_device = { .resource = ep93xx_wdt_resources, }; +/************************************************************************* + * EP93xx IDE + *************************************************************************/ +static struct resource ep93xx_ide_resources[] = { + DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38), + DEFINE_RES_IRQ(IRQ_EP93XX_EXT3), +}; + +static struct platform_device ep93xx_ide_device = { + .name = "ep93xx-ide", + .id = -1, + .dev = { + .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(ep93xx_ide_resources), + .resource = ep93xx_ide_resources, +}; + +void __init ep93xx_register_ide(void) +{ + platform_device_register(&ep93xx_ide_device); +} + +int ep93xx_ide_acquire_gpio(struct platform_device *pdev) +{ + int err; + int i; + + err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev)); + if (err) + return err; + err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev)); + if (err) + goto fail_egpio15; + for (i = 2; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_e; + } + for (i = 4; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_g; + } + for (i = 0; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_h; + } + + /* GPIO ports E[7:2], G[7:4] and H used by IDE */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + return 0; + +fail_gpio_h: + for (--i; i >= 0; --i) + gpio_free(EP93XX_GPIO_LINE_H(i)); + i = 8; +fail_gpio_g: + for (--i; i >= 4; --i) + gpio_free(EP93XX_GPIO_LINE_G(i)); + i = 8; +fail_gpio_e: + for (--i; i >= 2; --i) + gpio_free(EP93XX_GPIO_LINE_E(i)); + gpio_free(EP93XX_GPIO_LINE_EGPIO15); +fail_egpio15: + gpio_free(EP93XX_GPIO_LINE_EGPIO2); + return err; +} +EXPORT_SYMBOL(ep93xx_ide_acquire_gpio); + +void ep93xx_ide_release_gpio(struct platform_device *pdev) +{ + int i; + + for (i = 2; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_E(i)); + for (i = 4; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_G(i)); + for (i = 0; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_H(i)); + gpio_free(EP93XX_GPIO_LINE_EGPIO15); + gpio_free(EP93XX_GPIO_LINE_EGPIO2); + + + /* GPIO ports E[7:2], G[7:4] and H used by GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); +} +EXPORT_SYMBOL(ep93xx_ide_release_gpio); + void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index d74c5cddb98b..337ab7cf4c16 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -91,8 +91,8 @@ static void __init edb93xx_register_i2c(void) ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xxa_i2c_board_info, ARRAY_SIZE(edb93xxa_i2c_board_info)); - } else if (machine_is_edb9307() || machine_is_edb9312() || - machine_is_edb9315()) { + } else if (machine_is_edb9302() || machine_is_edb9307() + || machine_is_edb9312() || machine_is_edb9315()) { ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); @@ -233,6 +233,29 @@ static void __init edb93xx_register_fb(void) } +/************************************************************************* + * EDB93xx IDE + *************************************************************************/ +static int __init edb93xx_has_ide(void) +{ + /* + * Although EDB9312 and EDB9315 do have IDE capability, they have + * INTRQ line wired as pull-up, which makes using IDE interface + * problematic. + */ + return machine_is_edb9312() || machine_is_edb9315() || + machine_is_edb9315a(); +} + +static void __init edb93xx_register_ide(void) +{ + if (!edb93xx_has_ide()) + return; + + ep93xx_register_ide(); +} + + static void __init edb93xx_init_machine(void) { ep93xx_init_devices(); @@ -243,6 +266,7 @@ static void __init edb93xx_init_machine(void) edb93xx_register_i2s(); edb93xx_register_pwm(); edb93xx_register_fb(); + edb93xx_register_ide(); } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 1ecb040d98bf..33a5122c6dc8 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -48,6 +48,9 @@ void ep93xx_register_i2s(void); int ep93xx_i2s_acquire(void); void ep93xx_i2s_release(void); void ep93xx_register_ac97(void); +void ep93xx_register_ide(void); +int ep93xx_ide_acquire_gpio(struct platform_device *pdev); +void ep93xx_ide_release_gpio(struct platform_device *pdev); void ep93xx_init_devices(void); extern struct sys_timer ep93xx_timer; diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h index 979fba722926..7bf7ff8beae7 100644 --- a/arch/arm/mach-ep93xx/soc.h +++ b/arch/arm/mach-ep93xx/soc.h @@ -69,6 +69,7 @@ #define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) +#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000) #define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) #define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index bcb7db453145..26fe9de35ecb 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -586,17 +586,17 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 13), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "exynos4210-spi.0", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 16), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "exynos4210-spi.1", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 17), }, { .name = "spi", - .devname = "s3c64xx-spi.2", + .devname = "exynos4210-spi.2", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 18), }, { @@ -1242,40 +1242,67 @@ static struct clksrc_clk exynos4_clk_sclk_mmc3 = { .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 }, }; +static struct clksrc_clk exynos4_clk_mdout_spi0 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.0", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_mdout_spi1 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.1", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_mdout_spi2 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.2", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, +}; + static struct clksrc_clk exynos4_clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "exynos4210-spi.0", + .parent = &exynos4_clk_mdout_spi0.clk, .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 16), }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 }, }; static struct clksrc_clk exynos4_clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "exynos4210-spi.1", + .parent = &exynos4_clk_mdout_spi1.clk, .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 20), }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 }, }; static struct clksrc_clk exynos4_clk_sclk_spi2 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.2", + .devname = "exynos4210-spi.2", + .parent = &exynos4_clk_mdout_spi2.clk, .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 24), }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 }, }; /* Clock initialization code */ @@ -1331,7 +1358,9 @@ static struct clksrc_clk *exynos4_clksrc_cdev[] = { &exynos4_clk_sclk_spi0, &exynos4_clk_sclk_spi1, &exynos4_clk_sclk_spi2, - + &exynos4_clk_mdout_spi0, + &exynos4_clk_mdout_spi1, + &exynos4_clk_mdout_spi2, }; static struct clk_lookup exynos4_clk_lookup[] = { @@ -1347,9 +1376,9 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), - CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), + CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), + CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), + CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), }; static int xtal_rate; diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index fefa336be2b4..774533c67066 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -131,6 +131,11 @@ static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable); } +static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable); +} + static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable); @@ -741,6 +746,24 @@ static struct clk exynos5_init_clocks_off[] = { .enable = exynos5_clk_ip_peric_ctrl, .ctrlbit = (1 << 14), }, { + .name = "spi", + .devname = "exynos4210-spi.0", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "spi", + .devname = "exynos4210-spi.1", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .devname = "exynos4210-spi.2", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 18), + }, { .name = SYSMMU_CLOCK_NAME, .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0), .enable = &exynos5_clk_ip_mfc_ctrl, @@ -1034,6 +1057,69 @@ static struct clksrc_clk exynos5_clk_sclk_mmc3 = { .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 }, }; +static struct clksrc_clk exynos5_clk_mdout_spi0 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.0", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_mdout_spi1 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.1", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_mdout_spi2 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.2", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "exynos4210-spi.0", + .parent = &exynos5_clk_mdout_spi0.clk, + .enable = exynos5_clksrc_mask_peric1_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "exynos4210-spi.1", + .parent = &exynos5_clk_mdout_spi1.clk, + .enable = exynos5_clksrc_mask_peric1_ctrl, + .ctrlbit = (1 << 20), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_spi2 = { + .clk = { + .name = "sclk_spi", + .devname = "exynos4210-spi.2", + .parent = &exynos5_clk_mdout_spi2.clk, + .enable = exynos5_clksrc_mask_peric1_ctrl, + .ctrlbit = (1 << 24), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 }, +}; + static struct clksrc_clk exynos5_clksrcs[] = { { .clk = { @@ -1148,6 +1234,12 @@ static struct clksrc_clk *exynos5_sysclks[] = { &exynos5_clk_dout_mmc4, &exynos5_clk_aclk_acp, &exynos5_clk_pclk_acp, + &exynos5_clk_sclk_spi0, + &exynos5_clk_sclk_spi1, + &exynos5_clk_sclk_spi2, + &exynos5_clk_mdout_spi0, + &exynos5_clk_mdout_spi1, + &exynos5_clk_mdout_spi2, }; static struct clk *exynos5_clk_cdev[] = { @@ -1176,6 +1268,9 @@ static struct clk_lookup exynos5_clk_lookup[] = { CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk), + CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk), + CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 742edd3bbec3..4eb39cdf75ea 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -540,7 +540,8 @@ static struct irq_domain_ops combiner_irq_domain_ops = { .map = combiner_irq_domain_map, }; -void __init combiner_init(void __iomem *combiner_base, struct device_node *np) +static void __init combiner_init(void __iomem *combiner_base, + struct device_node *np) { int i, irq, irq_base; unsigned int max_nr, nr_irq; @@ -712,31 +713,6 @@ static int __init exynos4_l2x0_cache_init(void) early_initcall(exynos4_l2x0_cache_init); #endif -static int __init exynos5_l2_cache_init(void) -{ - unsigned int val; - - if (!soc_is_exynos5250()) - return 0; - - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #(1 << 2)\n" /* cache disable */ - "mcr p15, 0, %0, c1, c0, 0\n" - "mrc p15, 1, %0, c9, c0, 2\n" - : "=r"(val)); - - val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0); - - asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #(1 << 2)\n" /* cache enable */ - "mcr p15, 0, %0, c1, c0, 0\n" - : : "r"(val)); - - return 0; -} -early_initcall(exynos5_l2_cache_init); - static int __init exynos_init(void) { printk(KERN_INFO "EXYNOS: Initializing architecture\n"); diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 7a4b4789eb72..35bced6f9092 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -195,6 +195,10 @@ #define IRQ_IIC6 EXYNOS4_IRQ_IIC6 #define IRQ_IIC7 EXYNOS4_IRQ_IIC7 +#define IRQ_SPI0 EXYNOS4_IRQ_SPI0 +#define IRQ_SPI1 EXYNOS4_IRQ_SPI1 +#define IRQ_SPI2 EXYNOS4_IRQ_SPI2 + #define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST #define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index ca4aa89aa46b..c72b675b3e4b 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -154,6 +154,9 @@ #define EXYNOS4_PA_SPI0 0x13920000 #define EXYNOS4_PA_SPI1 0x13930000 #define EXYNOS4_PA_SPI2 0x13940000 +#define EXYNOS5_PA_SPI0 0x12D20000 +#define EXYNOS5_PA_SPI1 0x12D30000 +#define EXYNOS5_PA_SPI2 0x12D40000 #define EXYNOS4_PA_GPIO1 0x11400000 #define EXYNOS4_PA_GPIO2 0x11000000 diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 43a99e6f56ab..d4e392b811a3 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -232,6 +232,11 @@ #define EXYNOS5_USB_CFG S5P_PMUREG(0x0230) +#define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) +#define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C) + +#define EXYNOS5_SYS_WDTRESET (1 << 20) + #define EXYNOS5_ARM_CORE0_SYS_PWR_REG S5P_PMUREG(0x1000) #define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1004) #define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1008) diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h index c337cf3a71bf..07277735252e 100644 --- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h +++ b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h @@ -35,11 +35,21 @@ #define PHY1_COMMON_ON_N (1 << 7) #define PHY0_COMMON_ON_N (1 << 4) #define PHY0_ID_PULLUP (1 << 2) -#define CLKSEL_MASK (0x3 << 0) -#define CLKSEL_SHIFT (0) -#define CLKSEL_48M (0x0 << 0) -#define CLKSEL_12M (0x2 << 0) -#define CLKSEL_24M (0x3 << 0) + +#define EXYNOS4_CLKSEL_SHIFT (0) + +#define EXYNOS4210_CLKSEL_MASK (0x3 << 0) +#define EXYNOS4210_CLKSEL_48M (0x0 << 0) +#define EXYNOS4210_CLKSEL_12M (0x2 << 0) +#define EXYNOS4210_CLKSEL_24M (0x3 << 0) + +#define EXYNOS4X12_CLKSEL_MASK (0x7 << 0) +#define EXYNOS4X12_CLKSEL_9600K (0x0 << 0) +#define EXYNOS4X12_CLKSEL_10M (0x1 << 0) +#define EXYNOS4X12_CLKSEL_12M (0x2 << 0) +#define EXYNOS4X12_CLKSEL_19200K (0x3 << 0) +#define EXYNOS4X12_CLKSEL_20M (0x4 << 0) +#define EXYNOS4X12_CLKSEL_24M (0x5 << 0) #define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08) #define HOST_LINK_PORT_SWRST_MASK (0xf << 6) diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h deleted file mode 100644 index c71a5fba6a84..000000000000 --- a/arch/arm/mach-exynos/include/mach/spi-clocks.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h - * - * Copyright (C) 2011 Samsung Electronics Co. Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SPI_CLKS_H -#define __ASM_ARCH_SPI_CLKS_H __FILE__ - -/* Must source from SCLK_SPI */ -#define EXYNOS_SPI_SRCCLK_SCLK 0 - -#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e7e9743543ac..b2b5d5faa748 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -55,6 +55,12 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { "exynos4-sdhci.3", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), "s3c2440-i2c.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0, + "exynos4210-spi.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1, + "exynos4210-spi.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2, + "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), {}, diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 7b1e11a228cc..ef770bc2318f 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -47,6 +47,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "s3c2440-i2c.0", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1), "s3c2440-i2c.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0, + "exynos4210-spi.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1, + "exynos4210-spi.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2, + "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 656f8fc9addd..f3b328d0aff6 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -50,7 +50,6 @@ #include <plat/gpio-cfg.h> #include <plat/iic.h> #include <plat/mfc.h> -#include <plat/pd.h> #include <plat/fimc-core.h> #include <plat/camport.h> #include <plat/mipi_csis.h> diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index f5572be9d7bf..873c708fd340 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -38,7 +38,6 @@ #include <plat/clock.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> -#include <plat/pd.h> #include <plat/fb.h> #include <plat/mfc.h> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 262e9e446a96..5fb209c4a594 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -34,7 +34,6 @@ #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/iic.h> -#include <plat/pd.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> #include <plat/mfc.h> diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index cd92fa86ba41..68719f57dcea 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -39,7 +39,6 @@ #include <plat/fb.h> #include <plat/mfc.h> #include <plat/sdhci.h> -#include <plat/pd.h> #include <plat/regs-fb-v4.h> #include <plat/fimc-core.h> #include <plat/s5p-time.h> diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index e9fafcf163de..373c3c00d24c 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -119,7 +119,9 @@ static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { - if (pm_genpd_add_device(&pd->pd, &pdev->dev)) + if (!pm_genpd_add_device(&pd->pd, &pdev->dev)) + pm_genpd_dev_need_restore(&pdev->dev, true); + else pr_info("%s: error in adding %s device to %s power" "domain\n", __func__, dev_name(&pdev->dev), pd->name); @@ -151,9 +153,12 @@ static __init int exynos4_pm_init_power_domain(void) if (of_have_populated_dt()) return exynos_pm_dt_parse_domains(); - for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) - pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL, - exynos4_pm_domains[idx]->is_off); + for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) { + struct exynos_pm_domain *pd = exynos4_pm_domains[idx]; + int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; + + pm_genpd_init(&pd->pd, NULL, !on); + } #ifdef CONFIG_S5P_DEV_FIMD0 exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0); diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index 4aacb66f7161..3a48c852be6c 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -315,7 +315,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = { { PMU_TABLE_END,}, }; -void __iomem *exynos5_list_both_cnt_feed[] = { +static void __iomem *exynos5_list_both_cnt_feed[] = { EXYNOS5_ARM_CORE0_OPTION, EXYNOS5_ARM_CORE1_OPTION, EXYNOS5_ARM_COMMON_OPTION, @@ -329,7 +329,7 @@ void __iomem *exynos5_list_both_cnt_feed[] = { EXYNOS5_TOP_PWR_SYSMEM_OPTION, }; -void __iomem *exynos5_list_diable_wfi_wfe[] = { +static void __iomem *exynos5_list_diable_wfi_wfe[] = { EXYNOS5_ARM_CORE1_OPTION, EXYNOS5_FSYS_ARM_OPTION, EXYNOS5_ISP_ARM_OPTION, @@ -390,6 +390,8 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode) static int __init exynos_pmu_init(void) { + unsigned int value; + exynos_pmu_config = exynos4210_pmu_config; if (soc_is_exynos4210()) { @@ -399,6 +401,18 @@ static int __init exynos_pmu_init(void) exynos_pmu_config = exynos4x12_pmu_config; pr_info("EXYNOS4x12 PMU Initialize\n"); } else if (soc_is_exynos5250()) { + /* + * When SYS_WDTRESET is set, watchdog timer reset request + * is ignored by power management unit. + */ + value = __raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE); + value &= ~EXYNOS5_SYS_WDTRESET; + __raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE); + + value = __raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST); + value &= ~EXYNOS5_SYS_WDTRESET; + __raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST); + exynos_pmu_config = exynos5250_pmu_config; pr_info("EXYNOS5250 PMU Initialize\n"); } else { diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c index 833ff40ee0e8..4999829d1c6e 100644 --- a/arch/arm/mach-exynos/setup-spi.c +++ b/arch/arm/mach-exynos/setup-spi.c @@ -9,21 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> - #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .high_speed = 1, - .clk_from_cmu = true, - .tx_st_done = 25, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2)); s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP); @@ -34,15 +23,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, - .clk_from_cmu = true, - .tx_st_done = 25, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2)); s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP); @@ -53,15 +34,7 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI2 -struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, - .clk_from_cmu = true, - .tx_st_done = 25, -}; - -int s3c64xx_spi2_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi2_cfg_gpio(void) { s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5)); s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 1af0a7f44e00..b81cc569a8dd 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -31,27 +31,55 @@ static void exynos4210_usb_phy_clkset(struct platform_device *pdev) struct clk *xusbxti_clk; u32 phyclk; - /* set clock frequency for PLL */ - phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK; - xusbxti_clk = clk_get(&pdev->dev, "xusbxti"); if (xusbxti_clk && !IS_ERR(xusbxti_clk)) { - switch (clk_get_rate(xusbxti_clk)) { - case 12 * MHZ: - phyclk |= CLKSEL_12M; - break; - case 24 * MHZ: - phyclk |= CLKSEL_24M; - break; - default: - case 48 * MHZ: - /* default reference clock */ - break; + if (soc_is_exynos4210()) { + /* set clock frequency for PLL */ + phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4210_CLKSEL_MASK; + + switch (clk_get_rate(xusbxti_clk)) { + case 12 * MHZ: + phyclk |= EXYNOS4210_CLKSEL_12M; + break; + case 48 * MHZ: + phyclk |= EXYNOS4210_CLKSEL_48M; + break; + default: + case 24 * MHZ: + phyclk |= EXYNOS4210_CLKSEL_24M; + break; + } + writel(phyclk, EXYNOS4_PHYCLK); + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { + /* set clock frequency for PLL */ + phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4X12_CLKSEL_MASK; + + switch (clk_get_rate(xusbxti_clk)) { + case 9600 * KHZ: + phyclk |= EXYNOS4X12_CLKSEL_9600K; + break; + case 10 * MHZ: + phyclk |= EXYNOS4X12_CLKSEL_10M; + break; + case 12 * MHZ: + phyclk |= EXYNOS4X12_CLKSEL_12M; + break; + case 19200 * KHZ: + phyclk |= EXYNOS4X12_CLKSEL_19200K; + break; + case 20 * MHZ: + phyclk |= EXYNOS4X12_CLKSEL_20M; + break; + default: + case 24 * MHZ: + /* default reference clock */ + phyclk |= EXYNOS4X12_CLKSEL_24M; + break; + } + writel(phyclk, EXYNOS4_PHYCLK); } clk_put(xusbxti_clk); } - - writel(phyclk, EXYNOS4_PHYCLK); } static int exynos4210_usb_phy0_init(struct platform_device *pdev) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index eff4db5de0dd..7616101a35f0 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -52,6 +52,7 @@ config SOC_IMX25 select ARCH_MX25 select COMMON_CLK select CPU_ARM926T + select HAVE_CAN_FLEXCAN if CAN select ARCH_MXC_IOMUX_V3 select MXC_AVIC @@ -73,12 +74,13 @@ config SOC_IMX31 config SOC_IMX35 bool - select CPU_V6 + select CPU_V6K select ARCH_MXC_IOMUX_V3 select COMMON_CLK select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP + select HAVE_CAN_FLEXCAN if CAN config SOC_IMX5 select CPU_V7 @@ -105,6 +107,7 @@ config SOC_IMX53 select SOC_IMX5 select ARCH_MX5 select ARCH_MX53 + select HAVE_CAN_FLEXCAN if CAN if ARCH_IMX_V4_V5 @@ -158,7 +161,6 @@ config MACH_MX25_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART @@ -557,6 +559,14 @@ config MACH_BUG Include support for BUGBase 1.3 platform. This includes specific configurations for the board and its peripherals. +config MACH_IMX31_DT + bool "Support i.MX31 platforms from device tree" + select SOC_IMX31 + select USE_OF + help + Include support for Freescale i.MX31 based platforms + using the device tree for discovery. + comment "MX35 platforms:" config MACH_PCM043 @@ -589,6 +599,7 @@ config MACH_MX35_3DS select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help Include support for MX35PDK platform. This includes specific @@ -826,10 +837,12 @@ config SOC_IMX6Q select COMMON_CLK select CPU_V7 select HAVE_ARM_SCU + select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC select HAVE_SMP + select MFD_ANATOP select PINCTRL select PINCTRL_IMX6Q select USE_OF diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ff29421414f2..07f7c226e4cf 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_QONG) += mach-qong.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o obj-$(CONFIG_MACH_BUG) += mach-bug.o +obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o # i.MX35 based machines obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index c9a06d800f8e..f87a48fc74e1 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -20,6 +20,7 @@ #include <linux/clkdev.h> #include <linux/io.h> #include <linux/err.h> +#include <linux/of.h> #include <mach/hardware.h> #include <mach/mx31.h> @@ -179,3 +180,21 @@ int __init mx31_clocks_init(unsigned long fref) return 0; } + +#ifdef CONFIG_OF +int __init mx31_clocks_init_dt(void) +{ + struct device_node *np; + u32 fref = 26000000; /* default */ + + for_each_compatible_node(np, NULL, "fixed-clock") { + if (!of_device_is_compatible(np, "fsl,imx-osc26m")) + continue; + + if (!of_property_read_u32(np, "clock-frequency", &fref)) + break; + } + + return mx31_clocks_init(fref); +} +#endif diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 920a8cc42726..c6422fb10bae 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -201,7 +201,6 @@ int __init mx35_clocks_init() pr_err("i.MX35 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); @@ -264,6 +263,14 @@ int __init mx35_clocks_init() clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + /* + * SCC is needed to boot via mmc after a watchdog reset. The clock code + * before conversion to common clk also enabled UART1 (which isn't + * handled here and not needed for mmc) and IIM (which is enabled + * unconditionally above). + */ + clk_prepare_enable(clk[scc_gate]); + imx_print_silicon_rev("i.MX35", mx35_revision()); #ifdef CONFIG_MXC_USE_EPIT diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index e1a17ac7b3b4..ea89520b6e22 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -147,12 +147,12 @@ enum mx6q_clks { esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb, hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2, ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi, - mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, + mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch, gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1, ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, clk_max }; @@ -198,6 +198,9 @@ int __init mx6q_clocks_init(void) clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3); clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3); + clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6); + clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6); + /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); @@ -318,7 +321,7 @@ int __init mx6q_clocks_init(void) clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); /* name parent_name reg shift */ - clk[apbh_dma] = imx_clk_gate2("apbh_dma", "ahb", base + 0x68, 4); + clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6); clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16); @@ -357,6 +360,7 @@ int __init mx6q_clocks_init(void) clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30); clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0); + clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16); clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18); clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20); @@ -388,12 +392,21 @@ int __init mx6q_clocks_init(void) pr_err("i.MX6q clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[mmdc_ch0_axi], NULL, "mmdc_ch0_axi"); - clk_register_clkdev(clk[mmdc_ch1_axi], NULL, "mmdc_ch1_axi"); clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[twd], NULL, "smp_twd"); - clk_register_clkdev(clk[usboh3], NULL, "usboh3"); + clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh"); + clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand"); + clk_register_clkdev(clk[usboh3], NULL, "2184000.usb"); + clk_register_clkdev(clk[usboh3], NULL, "2184200.usb"); + clk_register_clkdev(clk[usboh3], NULL, "2184400.usb"); + clk_register_clkdev(clk[usboh3], NULL, "2184600.usb"); + clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy"); + clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy"); clk_register_clkdev(clk[uart_serial], "per", "2020000.serial"); clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial"); clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial"); diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 2628e0c474dc..93ece55f75df 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -14,7 +14,7 @@ extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data; imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata) extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data; -#define imx21_add_imx2_wdt(pdata) \ +#define imx21_add_imx2_wdt() \ imx_add_imx2_wdt(&imx21_imx2_wdt_data) extern const struct imx_imx_fb_data imx21_imx_fb_data; @@ -50,7 +50,7 @@ extern const struct imx_mxc_nand_data imx21_mxc_nand_data; imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) extern const struct imx_mxc_w1_data imx21_mxc_w1_data; -#define imx21_add_mxc_w1(pdata) \ +#define imx21_add_mxc_w1() \ imx_add_mxc_w1(&imx21_mxc_w1_data) extern const struct imx_spi_imx_data imx21_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index efa0761c508d..f8e03dd1f116 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -24,11 +24,11 @@ extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata) extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data; -#define imx25_add_imxdi_rtc(pdata) \ +#define imx25_add_imxdi_rtc() \ imx_add_imxdi_rtc(&imx25_imxdi_rtc_data) extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data; -#define imx25_add_imx2_wdt(pdata) \ +#define imx25_add_imx2_wdt() \ imx_add_imx2_wdt(&imx25_imx2_wdt_data) extern const struct imx_imx_fb_data imx25_imx_fb_data; diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 28537a5d9048..436c5720fe6a 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -18,7 +18,7 @@ extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; -#define imx27_add_imx2_wdt(pdata) \ +#define imx27_add_imx2_wdt() \ imx_add_imx2_wdt(&imx27_imx2_wdt_data) extern const struct imx_imx_fb_data imx27_imx_fb_data; @@ -50,7 +50,7 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) -#define imx27_add_mx2_emmaprp(pdata) \ +#define imx27_add_mx2_emmaprp() \ imx_add_mx2_emmaprp(&imx27_mx2_camera_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; @@ -69,7 +69,7 @@ extern const struct imx_mxc_nand_data imx27_mxc_nand_data; imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) extern const struct imx_mxc_w1_data imx27_mxc_w1_data; -#define imx27_add_mxc_w1(pdata) \ +#define imx27_add_mxc_w1() \ imx_add_mxc_w1(&imx27_mxc_w1_data) extern const struct imx_spi_imx_data imx27_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index 488e241a6db6..13f533d0aa5c 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -14,7 +14,7 @@ extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata) extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data; -#define imx31_add_imx2_wdt(pdata) \ +#define imx31_add_imx2_wdt() \ imx_add_imx2_wdt(&imx31_imx2_wdt_data) extern const struct imx_imx_i2c_data imx31_imx_i2c_data[]; @@ -65,11 +65,11 @@ extern const struct imx_mxc_nand_data imx31_mxc_nand_data; imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data; -#define imx31_add_mxc_rtc(pdata) \ +#define imx31_add_mxc_rtc() \ imx_add_mxc_rtc(&imx31_mxc_rtc_data) extern const struct imx_mxc_w1_data imx31_mxc_w1_data; -#define imx31_add_mxc_w1(pdata) \ +#define imx31_add_mxc_w1() \ imx_add_mxc_w1(&imx31_mxc_w1_data) extern const struct imx_spi_imx_data imx31_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index 7b99ef0bb501..4815be1ee675 100644 --- a/arch/arm/mach-imx/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -24,7 +24,7 @@ extern const struct imx_flexcan_data imx35_flexcan_data[]; #define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata) extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data; -#define imx35_add_imx2_wdt(pdata) \ +#define imx35_add_imx2_wdt() \ imx_add_imx2_wdt(&imx35_imx2_wdt_data) extern const struct imx_imx_i2c_data imx35_imx_i2c_data[]; @@ -68,8 +68,12 @@ extern const struct imx_mxc_nand_data imx35_mxc_nand_data; #define imx35_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) +extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data; +#define imx35_add_mxc_rtc() \ + imx_add_mxc_rtc(&imx35_mxc_rtc_data) + extern const struct imx_mxc_w1_data imx35_mxc_w1_data; -#define imx35_add_mxc_w1(pdata) \ +#define imx35_add_mxc_w1() \ imx_add_mxc_w1(&imx35_mxc_w1_data) extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[]; diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index af488bc0e225..9f1718725195 100644 --- a/arch/arm/mach-imx/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h @@ -55,7 +55,7 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[]; imx_add_spi_imx(&imx51_ecspi_data[id], pdata) extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[]; -#define imx51_add_imx2_wdt(id, pdata) \ +#define imx51_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx51_imx2_wdt_data[id]) extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[]; diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h index 6e1e5d1f8c3a..77e0db96c448 100644 --- a/arch/arm/mach-imx/devices-imx53.h +++ b/arch/arm/mach-imx/devices-imx53.h @@ -30,7 +30,7 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[]; imx_add_spi_imx(&imx53_ecspi_data[id], pdata) extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; -#define imx53_add_imx2_wdt(id, pdata) \ +#define imx53_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 865daf0b09e9..05bb41d99728 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -24,14 +24,18 @@ #define MX25_OTG_SIC_SHIFT 29 #define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) #define MX25_OTG_PM_BIT (1 << 24) +#define MX25_OTG_PP_BIT (1 << 11) +#define MX25_OTG_OCPOL_BIT (1 << 3) #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) +#define MX25_H1_PP_BIT (1 << 18) #define MX25_H1_PM_BIT (1 << 8) #define MX25_H1_IPPUE_UP_BIT (1 << 7) #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) #define MX25_H1_TLL_BIT (1 << 5) #define MX25_H1_USBTE_BIT (1 << 4) +#define MX25_H1_OCPOL_BIT (1 << 2) int mx25_initialize_usb_hw(int port, unsigned int flags) { @@ -41,21 +45,35 @@ int mx25_initialize_usb_hw(int port, unsigned int flags) switch (port) { case 0: /* OTG port */ - v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT); + v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT | + MX25_OTG_OCPOL_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX25_OTG_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX25_OTG_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX25_OTG_OCPOL_BIT; + break; case 1: /* H1 port */ - v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT | - MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); + v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT | + MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | + MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX25_H1_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX25_H1_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX25_H1_OCPOL_BIT; + if (!(flags & MXC_EHCI_TTL_ENABLED)) v |= MX25_H1_TLL_BIT; diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 001ec3971f5d..73574c30cf50 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -24,14 +24,18 @@ #define MX35_OTG_SIC_SHIFT 29 #define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) #define MX35_OTG_PM_BIT (1 << 24) +#define MX35_OTG_PP_BIT (1 << 11) +#define MX35_OTG_OCPOL_BIT (1 << 3) #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PP_BIT (1 << 18) #define MX35_H1_PM_BIT (1 << 8) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5) #define MX35_H1_USBTE_BIT (1 << 4) +#define MX35_H1_OCPOL_BIT (1 << 2) int mx35_initialize_usb_hw(int port, unsigned int flags) { @@ -41,21 +45,35 @@ int mx35_initialize_usb_hw(int port, unsigned int flags) switch (port) { case 0: /* OTG port */ - v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT | + MX35_OTG_OCPOL_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX35_OTG_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_OTG_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_OTG_OCPOL_BIT; + break; case 1: /* H1 port */ - v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | - MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT | + MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT | + MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX35_H1_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_H1_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_H1_OCPOL_BIT; + if (!(flags & MXC_EHCI_TTL_ENABLED)) v |= MX35_H1_TLL_BIT; diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index c17fa131728b..a6a4afb0ad62 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -28,11 +28,14 @@ #define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ #define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ #define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ -#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ /* USB_PHY_CTRL_FUNC */ +#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) /* OTG Polarity of Overcurrent */ #define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ +#define MXC_H1_OC_POL_BIT (1 << 6) /* UH1 Polarity of Overcurrent */ #define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ +#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* OTG Power Pin Polarity */ /* USBH2CTRL */ #define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) @@ -80,13 +83,21 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) if (flags & MXC_EHCI_INTERNAL_PHY) { v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_OTG_PHYCTRL_OC_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) { - /* OC/USBPWR is not used */ - v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; - } else { /* OC/USBPWR is used */ v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + } else { + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; } + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_OTG_PHYCTRL_PWR_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); @@ -95,9 +106,9 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) else v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v |= MXC_OTG_UCTRL_OPM_BIT; - else v &= ~MXC_OTG_UCTRL_OPM_BIT; + else + v |= MXC_OTG_UCTRL_OPM_BIT; __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); } break; @@ -113,12 +124,16 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) } if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/ else v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H1_OC_POL_BIT; + else + v &= ~MXC_H1_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ else @@ -142,7 +157,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) } if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/ else v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index eee0cc8d92a4..52efe4d5149b 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -75,7 +75,7 @@ static struct sys_timer imx27_timer = { .init = imx27_timer_init, }; -static const char *imx27_dt_board_compat[] __initdata = { +static const char * const imx27_dt_board_compat[] __initconst = { "fsl,imx27", NULL }; diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c new file mode 100644 index 000000000000..a68ba207b2b7 --- /dev/null +++ b/arch/arm/mach-imx/imx31-dt.c @@ -0,0 +1,63 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/irq.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> +#include <mach/mx31.h> + +static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR, + "imx21-uart.0", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR, + "imx21-uart.1", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR, + "imx21-uart.2", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR, + "imx21-uart.3", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR, + "imx21-uart.4", NULL), + { /* sentinel */ } +}; + +static void __init imx31_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + imx31_auxdata_lookup, NULL); +} + +static void __init imx31_timer_init(void) +{ + mx31_clocks_init_dt(); +} + +static struct sys_timer imx31_timer = { + .init = imx31_timer_init, +}; + +static const char *imx31_dt_board_compat[] __initdata = { + "fsl,imx31", + NULL +}; + +DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, + .timer = &imx31_timer, + .init_machine = imx31_dt_init, + .dt_compat = imx31_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index d085aea08709..9a3b06e688c5 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -233,18 +233,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx27_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx27_otg_mode); @@ -266,8 +266,8 @@ static void __init eukrea_cpuimx27_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) /* SDHC2 can be used for Wifi */ diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 6450303f1a7a..1634e54ffed5 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -141,18 +141,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx35_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx35_otg_mode); @@ -167,7 +167,7 @@ static void __init eukrea_cpuimx35_init(void) ARRAY_SIZE(eukrea_cpuimx35_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 1e09de50cbcd..e78b40b41462 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -217,18 +217,18 @@ static const struct mxc_usbh_platform_data usbh1_config __initconst = { .portsc = MXC_EHCI_MODE_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx51sd_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx51sd_otg_mode); @@ -292,7 +292,7 @@ static void __init eukrea_cpuimx51sd_init(void) imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); gpio_request(ETH_RST, "eth_rst"); gpio_set_value(ETH_RST, 1); diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index d1e04e676e33..017bbb70ea41 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -109,18 +109,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx25_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx25_otg_mode); @@ -134,9 +134,9 @@ static void __init eukrea_cpuimx25_init(void) imx25_add_imx_uart0(&uart_pdata); imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); - imx25_add_imxdi_rtc(NULL); + imx25_add_imxdi_rtc(); imx25_add_fec(&mx25_fec_pdata); - imx25_add_imx2_wdt(NULL); + imx25_add_imx2_wdt(); i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index f76edb96a48a..ba09552fe5fe 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -38,7 +38,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/system.h> +#include <asm/system_info.h> #include <mach/common.h> #include <mach/iomux-mx27.h> diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index c9d350c5dcc8..7381387a8905 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -57,7 +57,7 @@ static void __init mx27ipcam_init(void) imx27_add_imx_uart0(NULL); imx27_add_fec(NULL); - imx27_add_imx2_wdt(NULL); + imx27_add_imx2_wdt(); } static void __init mx27ipcam_timer_init(void) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index b47e98b7d539..140f55010630 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -24,6 +24,7 @@ #include <linux/pinctrl/machine.h> #include <linux/phy.h> #include <linux/micrel_phy.h> +#include <linux/mfd/anatop.h> #include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> @@ -113,6 +114,45 @@ static void __init imx6q_sabrelite_init(void) imx6q_sabrelite_cko1_setup(); } +static void __init imx6q_usb_init(void) +{ + struct device_node *np; + struct platform_device *pdev = NULL; + struct anatop *adata = NULL; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); + if (np) + pdev = of_find_device_by_node(np); + if (pdev) + adata = platform_get_drvdata(pdev); + if (!adata) { + if (np) + of_node_put(np); + return; + } + +#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0 +#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210 + +#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000 +#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000 + + /* + * The external charger detector needs to be disabled, + * or the signal at DP will be poor + */ + anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B + | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, + ~0); + anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B | + BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, + ~0); + + of_node_put(np); +} + static void __init imx6q_init_machine(void) { /* @@ -127,6 +167,7 @@ static void __init imx6q_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx6q_pm_init(); + imx6q_usb_init(); } static void __init imx6q_map_io(void) diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index f26734298aa6..ce247fd1269a 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -237,9 +237,9 @@ static void __init mx25pdk_init(void) imx25_add_fsl_usb2_udc(&otg_device_pdata); imx25_add_mxc_ehci_hs(&usbh2_pdata); imx25_add_mxc_nand(&mx25pdk_nand_board_info); - imx25_add_imxdi_rtc(NULL); + imx25_add_imxdi_rtc(); imx25_add_imx_fb(&mx25pdk_fb_pdata); - imx25_add_imx2_wdt(NULL); + imx25_add_imx2_wdt(); mx25pdk_fec_reset(); imx25_add_fec(&mx25_fec_pdata); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index c6d385c52257..ce9a5c26290c 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -241,18 +241,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx27_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx27_3ds_otg_mode); @@ -480,7 +480,7 @@ static void __init mx27pdk_init(void) imx27_add_fec(NULL); imx27_add_imx_keypad(&mx27_3ds_keymap_data); imx27_add_mxc_mmc(0, &sdhc1_pdata); - imx27_add_imx2_wdt(NULL); + imx27_add_imx2_wdt(); otg_phy_init(); if (otg_mode_host) { diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 0228d2e07fe0..7936bb32264d 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -310,7 +310,7 @@ static void __init mx27ads_board_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_mxc_w1(NULL); + imx27_add_mxc_w1(); } static void __init mx27ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 4eafdf275ea2..928e1dcbc6a7 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -671,18 +671,18 @@ static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx31_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx31_3ds_otg_mode); @@ -739,7 +739,7 @@ static void __init mx31_3ds_init(void) if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT)) printk(KERN_WARNING "Init of the debug board failed, all " "devices on the debug board are unusable.\n"); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); imx31_add_mxc_mmc(0, &sdhc1_pdata); diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 016791f038b0..63e84e67b990 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -544,7 +544,7 @@ static void __init mx31moboard_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); gpio_led_register_device(-1, &mx31moboard_led_pdata); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 28aa19476de7..69018e5c52de 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -540,18 +540,18 @@ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx35_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx35_3ds_otg_mode); @@ -571,7 +571,8 @@ static void __init mx35_3ds_init(void) mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); + imx35_add_mxc_rtc(); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 3c5b163923f6..2edb563b968d 100644 --- a/arch/arm/mach-imx/mach-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c @@ -154,7 +154,7 @@ static void __init mx51_3ds_init(void) imx51_add_sdhci_esdhc_imx(0, NULL); imx51_add_imx_keypad(&mx51_3ds_map_data); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); } static void __init mx51_3ds_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index dde397014d4b..7b31cbde8775 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -307,18 +307,18 @@ static const struct mxc_usbh_platform_data usbh1_config __initconst = { .portsc = MXC_EHCI_MODE_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init babbage_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", babbage_otg_mode); @@ -411,7 +411,7 @@ static void __init mx51_babbage_init(void) spi_register_board_info(mx51_babbage_spi_board_info, ARRAY_SIZE(mx51_babbage_spi_board_info)); imx51_add_ecspi(0, &mx51_babbage_spi_pdata); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); } static void __init mx51_babbage_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 05641980dc5e..4a7593a953e2 100644 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -243,7 +243,7 @@ static void __init mx53_ard_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); imx_add_gpio_keys(&ard_button_data); diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c index 5a72188b9cdb..a1060b26fb23 100644 --- a/arch/arm/mach-imx/mach-mx53_evk.c +++ b/arch/arm/mach-imx/mach-mx53_evk.c @@ -154,7 +154,7 @@ static void __init mx53_evk_board_init(void) spi_register_board_info(mx53_evk_spi_board_info, ARRAY_SIZE(mx53_evk_spi_board_info)); imx53_add_ecspi(0, &mx53_evk_spi_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); gpio_led_register_device(-1, &mx53evk_leds_data); } diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c index 37f67cac15a4..388c415d6b62 100644 --- a/arch/arm/mach-imx/mach-mx53_loco.c +++ b/arch/arm/mach-imx/mach-mx53_loco.c @@ -283,7 +283,7 @@ static void __init mx53_loco_board_init(void) imx53_add_imx_uart(0, NULL); mx53_loco_fec_reset(); imx53_add_fec(&mx53_loco_fec_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en"); if (ret) diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c index 8e972c5c3e13..f297df7ccb39 100644 --- a/arch/arm/mach-imx/mach-mx53_smd.c +++ b/arch/arm/mach-imx/mach-mx53_smd.c @@ -138,7 +138,7 @@ static void __init mx53_smd_board_init(void) mx53_smd_init_uart(); mx53_smd_fec_reset(); imx53_add_fec(&mx53_smd_fec_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); imx53_add_imx_i2c(0, &mx53_smd_i2c_data); imx53_add_sdhci_esdhc_imx(0, NULL); imx53_add_sdhci_esdhc_imx(1, NULL); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 541152e450c4..d37ed25003b2 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -298,18 +298,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pca100_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pca100_otg_mode); @@ -408,8 +408,8 @@ static void __init pca100_init(void) imx27_add_imx_fb(&pca100_fb_data); imx27_add_fec(NULL); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); } static void __init pca100_timer_init(void) diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 0a40004154f2..cd48712a6f50 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -557,18 +557,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pcm037_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pcm037_otg_mode); @@ -619,13 +619,13 @@ static void __init pcm037_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_uart0(&uart_pdata); /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ imx31_add_imx_uart1(&uart_pdata); imx31_add_imx_uart2(&uart_pdata); - imx31_add_mxc_w1(NULL); + imx31_add_mxc_w1(); /* LAN9217 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 2f3debe2a113..3fbb89d74fcc 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -332,8 +332,8 @@ static void __init pcm038_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); #ifdef CONFIG_MACH_PCM970_BASEBOARD pcm970_baseboard_init(); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 73585f55cca0..1f20f222375e 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -330,18 +330,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_UTMI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pcm043_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pcm043_otg_mode); @@ -363,7 +363,7 @@ static void __init pcm043_init(void) imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&pcm037_nand_board_info); diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 260621055b6b..a13087b11a6e 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -252,7 +252,7 @@ static void __init qong_init(void) mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); } static void __init qong_timer_init(void) diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index add8c69c6c1a..b26209d4bcef 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -272,7 +272,7 @@ static void __init vpr200_board_init(void) mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx_add_gpio_keys(&vpr200_gpio_keys_data); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index bf0fb87946ba..fa60ef6ac7ff 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -191,6 +191,6 @@ void __init mx31lite_db_init(void) imx31_add_mxc_mmc(0, &mmc_pdata); imx31_add_spi_imx0(&spi0_pdata); gpio_led_register_device(-1, &litekit_led_platform_data); - imx31_add_imx2_wdt(NULL); - imx31_add_mxc_rtc(NULL); + imx31_add_imx2_wdt(); + imx31_add_mxc_rtc(); } diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig deleted file mode 100644 index e0b3eee83834..000000000000 --- a/arch/arm/mach-lpc32xx/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -if ARCH_LPC32XX - -menu "Individual UART enable selections" - -config ARCH_LPC32XX_UART3_SELECT - bool "Add support for standard UART3" - help - Adds support for standard UART 3 when the 8250 serial support - is enabled. - -config ARCH_LPC32XX_UART4_SELECT - bool "Add support for standard UART4" - help - Adds support for standard UART 4 when the 8250 serial support - is enabled. - -config ARCH_LPC32XX_UART5_SELECT - bool "Add support for standard UART5" - default y - help - Adds support for standard UART 5 when the 8250 serial support - is enabled. - -config ARCH_LPC32XX_UART6_SELECT - bool "Add support for standard UART6" - help - Adds support for standard UART 6 when the 8250 serial support - is enabled. - -endmenu - -endif diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot index 2cfe0ee635c5..697323b5f92d 100644 --- a/arch/arm/mach-lpc32xx/Makefile.boot +++ b/arch/arm/mach-lpc32xx/Makefile.boot @@ -2,3 +2,4 @@ params_phys-y := 0x80000100 initrd_phys-y := 0x82000000 +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index f6a3ffec1f4b..f48c2e961b84 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -607,6 +607,19 @@ static struct clk clk_dma = { .get_rate = local_return_parent_rate, }; +static struct clk clk_pwm = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_PWM_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN | + LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK | + LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) | + LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN | + LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK | + LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1), + .get_rate = local_return_parent_rate, +}; + static struct clk clk_uart3 = { .parent = &clk_pclk, .enable = local_onoff_enable, @@ -691,10 +704,21 @@ static struct clk clk_nand = { .parent = &clk_hclk, .enable = local_onoff_enable, .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN, + .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN | + LPC32XX_CLKPWR_NANDCLK_SEL_SLC, .get_rate = local_return_parent_rate, }; +static struct clk clk_nand_mlc = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN | + LPC32XX_CLKPWR_NANDCLK_DMA_INT | + LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC, + .get_rate = local_return_parent_rate, +}; + static struct clk clk_i2s0 = { .parent = &clk_hclk, .enable = local_onoff_enable, @@ -707,7 +731,8 @@ static struct clk clk_i2s1 = { .parent = &clk_hclk, .enable = local_onoff_enable, .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN, + .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN | + LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA, .get_rate = local_return_parent_rate, }; @@ -727,14 +752,77 @@ static struct clk clk_rtc = { .get_rate = local_return_parent_rate, }; +static int local_usb_enable(struct clk *clk, int enable) +{ + u32 tmp; + + if (enable) { + /* Set up I2C pull levels */ + tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); + tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE; + __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL); + } + + return local_onoff_enable(clk, enable); +} + static struct clk clk_usbd = { .parent = &clk_usbpll, - .enable = local_onoff_enable, + .enable = local_usb_enable, .enable_reg = LPC32XX_CLKPWR_USB_CTRL, .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN, .get_rate = local_return_parent_rate, }; +#define OTG_ALWAYS_MASK (LPC32XX_USB_OTG_OTG_CLOCK_ON | \ + LPC32XX_USB_OTG_I2C_CLOCK_ON) + +static int local_usb_otg_enable(struct clk *clk, int enable) +{ + int to = 1000; + + if (enable) { + __raw_writel(clk->enable_mask, clk->enable_reg); + + while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & + clk->enable_mask) != clk->enable_mask) && (to > 0)) + to--; + } else { + __raw_writel(OTG_ALWAYS_MASK, clk->enable_reg); + + while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & + OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0)) + to--; + } + + if (to) + return 0; + else + return -1; +} + +static struct clk clk_usb_otg_dev = { + .parent = &clk_usbpll, + .enable = local_usb_otg_enable, + .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, + .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | + LPC32XX_USB_OTG_OTG_CLOCK_ON | + LPC32XX_USB_OTG_DEV_CLOCK_ON | + LPC32XX_USB_OTG_I2C_CLOCK_ON, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_usb_otg_host = { + .parent = &clk_usbpll, + .enable = local_usb_otg_enable, + .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, + .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | + LPC32XX_USB_OTG_OTG_CLOCK_ON | + LPC32XX_USB_OTG_HOST_CLOCK_ON | + LPC32XX_USB_OTG_I2C_CLOCK_ON, + .get_rate = local_return_parent_rate, +}; + static int tsc_onoff_enable(struct clk *clk, int enable) { u32 tmp; @@ -800,11 +888,17 @@ static int mmc_onoff_enable(struct clk *clk, int enable) u32 tmp; tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~LPC32XX_CLKPWR_MSCARD_SDCARD_EN; + ~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN | + LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN | + LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS | + LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS | + LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS | + LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS); /* If rate is 0, disable clock */ if (enable != 0) - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN; + tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN | + LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN; __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); @@ -853,7 +947,7 @@ static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate) static int mmc_set_rate(struct clk *clk, unsigned long rate) { - u32 oldclk, tmp; + u32 tmp; unsigned long prate, div, crate = mmc_round_rate(clk, rate); prate = clk->parent->get_rate(clk->parent); @@ -861,16 +955,12 @@ static int mmc_set_rate(struct clk *clk, unsigned long rate) div = prate / crate; /* The MMC clock must be on when accessing an MMC register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN, - LPC32XX_CLKPWR_MS_CTRL); tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div); + tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) | + LPC32XX_CLKPWR_MSCARD_SDCARD_EN; __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL); - return 0; } @@ -1111,6 +1201,7 @@ static struct clk_lookup lookups[] = { CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9), CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), + CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm), CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), @@ -1120,8 +1211,9 @@ static struct clk_lookup lookups[] = { CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2), CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0), CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1), - CLKDEV_INIT("lpc32xx_keys.0", NULL, &clk_kscan), - CLKDEV_INIT("lpc32xx-nand.0", "nand_ck", &clk_nand), + CLKDEV_INIT("40050000.key", NULL, &clk_kscan), + CLKDEV_INIT("20020000.flash", NULL, &clk_nand), + CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc), CLKDEV_INIT("40048000.adc", NULL, &clk_adc), CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0), CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1), @@ -1130,6 +1222,9 @@ static struct clk_lookup lookups[] = { CLKDEV_INIT("31060000.ethernet", NULL, &clk_net), CLKDEV_INIT("dev:clcd", NULL, &clk_lcd), CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd), + CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd), + CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev), + CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host), CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc), }; diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 5c96057b6d78..a48dc2dec485 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -26,6 +26,7 @@ #include <linux/io.h> #include <asm/mach/map.h> +#include <asm/system_info.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -224,7 +225,7 @@ void lpc23xx_restart(char mode, const char *cmd) ; } -static int __init lpc32xx_display_uid(void) +static int __init lpc32xx_check_uid(void) { u32 uid[4]; @@ -233,6 +234,11 @@ static int __init lpc32xx_display_uid(void) printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n", uid[3], uid[2], uid[1], uid[0]); + if (!system_serial_low && !system_serial_high) { + system_serial_low = uid[0]; + system_serial_high = uid[1]; + } + return 1; } -arch_initcall(lpc32xx_display_uid); +arch_initcall(lpc32xx_check_uid); diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h index 2ba6ca412bef..0052e7a76179 100644 --- a/arch/arm/mach-lpc32xx/include/mach/gpio.h +++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h @@ -3,6 +3,4 @@ #include "gpio-lpc32xx.h" -#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX) - #endif /* __MACH_GPIO_H */ diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h index c584f5bb164f..acc4aabf1c7b 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -694,4 +694,18 @@ #define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) #define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) +/* + * USB Otg Registers + */ +#define _OTGREG(x) io_p2v(LPC32XX_USB_OTG_BASE + (x)) +#define LPC32XX_USB_OTG_CLK_CTRL _OTGREG(0xFF4) +#define LPC32XX_USB_OTG_CLK_STAT _OTGREG(0xFF8) + +/* USB OTG CLK CTRL bit defines */ +#define LPC32XX_USB_OTG_AHB_M_CLOCK_ON _BIT(4) +#define LPC32XX_USB_OTG_OTG_CLOCK_ON _BIT(3) +#define LPC32XX_USB_OTG_I2C_CLOCK_ON _BIT(2) +#define LPC32XX_USB_OTG_DEV_CLOCK_ON _BIT(1) +#define LPC32XX_USB_OTG_HOST_CLOCK_ON _BIT(0) + #endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 540106cdb9ec..b07dcc90829d 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -30,12 +30,13 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/amba/pl022.h> +#include <linux/amba/pl08x.h> +#include <linux/amba/mmci.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/clk.h> -#include <linux/amba/pl08x.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -50,9 +51,9 @@ /* * Mapped GPIOLIB GPIOs */ -#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) -#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) -#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) +#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) +#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) +#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5) /* * AMBA LCD controller @@ -158,24 +159,6 @@ static struct clcd_board lpc32xx_clcd_data = { /* * AMBA SSP (SPI) */ -static void phy3250_spi_cs_set(u32 control) -{ - gpio_set_value(SPI0_CS_GPIO, (int) control); -} - -static struct pl022_config_chip spi0_chip_info = { - .com_mode = INTERRUPT_TRANSFER, - .iface = SSP_INTERFACE_MOTOROLA_SPI, - .hierarchy = SSP_MASTER, - .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, - .ctrl_len = SSP_BITS_8, - .wait_state = SSP_MWIRE_WAIT_ZERO, - .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, - .cs_control = phy3250_spi_cs_set, -}; - static struct pl022_ssp_controller lpc32xx_ssp0_data = { .bus_id = 0, .num_chipselect = 1, @@ -188,45 +171,56 @@ static struct pl022_ssp_controller lpc32xx_ssp1_data = { .enable_dma = 0, }; -/* AT25 driver registration */ -static int __init phy3250_spi_board_register(void) +static struct pl08x_channel_data pl08x_slave_channels[] = { + { + .bus_id = "nand-slc", + .min_signal = 1, /* SLC NAND Flash */ + .max_signal = 1, + .periph_buses = PL08X_AHB1, + }, + { + .bus_id = "nand-mlc", + .min_signal = 12, /* MLC NAND Flash */ + .max_signal = 12, + .periph_buses = PL08X_AHB1, + }, +}; + +static int pl08x_get_signal(const struct pl08x_channel_data *cd) +{ + return cd->min_signal; +} + +static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch) { -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) - static struct spi_board_info info[] = { - { - .modalias = "spidev", - .max_speed_hz = 5000000, - .bus_num = 0, - .chip_select = 0, - .controller_data = &spi0_chip_info, - }, - }; - -#else - static struct spi_eeprom eeprom = { - .name = "at25256a", - .byte_len = 0x8000, - .page_size = 64, - .flags = EE_ADDR2, - }; - - static struct spi_board_info info[] = { - { - .modalias = "at25", - .max_speed_hz = 5000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - .platform_data = &eeprom, - .controller_data = &spi0_chip_info, - }, - }; -#endif - return spi_register_board_info(info, ARRAY_SIZE(info)); } -arch_initcall(phy3250_spi_board_register); static struct pl08x_platform_data pl08x_pd = { + .slave_channels = &pl08x_slave_channels[0], + .num_slave_channels = ARRAY_SIZE(pl08x_slave_channels), + .get_signal = pl08x_get_signal, + .put_signal = pl08x_put_signal, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, +}; + +static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios) +{ + /* Only on and off are supported */ + if (ios->power_mode == MMC_POWER_OFF) + gpio_set_value(MMC_PWR_ENABLE_GPIO, 0); + else + gpio_set_value(MMC_PWR_ENABLE_GPIO, 1); + return 0; +} + +static struct mmci_platform_data lpc32xx_mmci_data = { + .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .ios_handler = mmc_handle_ios, + .dma_filter = NULL, + /* No DMA for now since AMBA PL080 dmaengine driver only does scatter + * gather, and the MMCI driver doesn't do it this way */ }; static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { @@ -234,6 +228,8 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data), OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data), OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), + OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd", + &lpc32xx_mmci_data), { } }; @@ -241,10 +237,6 @@ static void __init lpc3250_machine_init(void) { u32 tmp; - /* Setup SLC NAND controller muxing */ - __raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC, - LPC32XX_CLKPWR_NAND_CLK_CTRL); - /* Setup LCD muxing to RGB565 */ tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) & ~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK | @@ -252,47 +244,8 @@ static void __init lpc3250_machine_init(void) tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16; __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL); - /* Set up USB power */ - tmp = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - tmp |= LPC32XX_CLKPWR_USBCTRL_HCLK_EN | - LPC32XX_CLKPWR_USBCTRL_USBI2C_EN; - __raw_writel(tmp, LPC32XX_CLKPWR_USB_CTRL); - - /* Set up I2C pull levels */ - tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); - tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE | - LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE; - __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL); - - /* Disable IrDA pulsing support on UART6 */ - tmp = __raw_readl(LPC32XX_UARTCTL_CTRL); - tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS; - __raw_writel(tmp, LPC32XX_UARTCTL_CTRL); - - /* Enable DMA for I2S1 channel */ - tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL); - tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA; - __raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL); - lpc32xx_serial_init(); - /* - * AMBA peripheral clocks need to be enabled prior to AMBA device - * detection or a data fault will occur, so enable the clocks - * here. - */ - tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN), - LPC32XX_CLKPWR_LCDCLK_CTRL); - - tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL); - __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN), - LPC32XX_CLKPWR_SSP_CLK_CTRL); - - tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL); - __raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN), - LPC32XX_CLKPWR_DMA_CLK_CTRL); - /* Test clock needed for UDA1380 initial init */ __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC | LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN, @@ -302,12 +255,10 @@ static void __init lpc3250_machine_init(void) lpc32xx_auxdata_lookup, NULL); /* Register GPIOs used on this board */ - if (gpio_request(SPI0_CS_GPIO, "spi0 cs")) - printk(KERN_ERR "Error requesting gpio %u", - SPI0_CS_GPIO); - else if (gpio_direction_output(SPI0_CS_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - SPI0_CS_GPIO); + if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en")) + pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO); + else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1)) + pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO); } static char const *lpc32xx_dt_compat[] __initdata = { diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index f2735281616a..05621a29fba2 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -31,59 +31,6 @@ #define LPC32XX_SUART_FIFO_SIZE 64 -/* Standard 8250/16550 compatible serial ports */ -static struct plat_serial8250_port serial_std_platform_data[] = { -#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT - { - .membase = io_p2v(LPC32XX_UART5_BASE), - .mapbase = LPC32XX_UART5_BASE, - .irq = IRQ_LPC32XX_UART_IIR5, - .uartclk = LPC32XX_MAIN_OSC_FREQ, - .regshift = 2, - .iotype = UPIO_MEM32, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | - UPF_SKIP_TEST, - }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT - { - .membase = io_p2v(LPC32XX_UART3_BASE), - .mapbase = LPC32XX_UART3_BASE, - .irq = IRQ_LPC32XX_UART_IIR3, - .uartclk = LPC32XX_MAIN_OSC_FREQ, - .regshift = 2, - .iotype = UPIO_MEM32, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | - UPF_SKIP_TEST, - }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT - { - .membase = io_p2v(LPC32XX_UART4_BASE), - .mapbase = LPC32XX_UART4_BASE, - .irq = IRQ_LPC32XX_UART_IIR4, - .uartclk = LPC32XX_MAIN_OSC_FREQ, - .regshift = 2, - .iotype = UPIO_MEM32, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | - UPF_SKIP_TEST, - }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT - { - .membase = io_p2v(LPC32XX_UART6_BASE), - .mapbase = LPC32XX_UART6_BASE, - .irq = IRQ_LPC32XX_UART_IIR6, - .uartclk = LPC32XX_MAIN_OSC_FREQ, - .regshift = 2, - .iotype = UPIO_MEM32, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | - UPF_SKIP_TEST, - }, -#endif - { }, -}; - struct uartinit { char *uart_ck_name; u32 ck_mode_mask; @@ -92,7 +39,6 @@ struct uartinit { }; static struct uartinit uartinit_data[] __initdata = { -#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT { .uart_ck_name = "uart5_ck", .ck_mode_mask = @@ -100,8 +46,6 @@ static struct uartinit uartinit_data[] __initdata = { .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, .mapbase = LPC32XX_UART5_BASE, }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT { .uart_ck_name = "uart3_ck", .ck_mode_mask = @@ -109,8 +53,6 @@ static struct uartinit uartinit_data[] __initdata = { .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, .mapbase = LPC32XX_UART3_BASE, }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT { .uart_ck_name = "uart4_ck", .ck_mode_mask = @@ -118,8 +60,6 @@ static struct uartinit uartinit_data[] __initdata = { .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, .mapbase = LPC32XX_UART4_BASE, }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT { .uart_ck_name = "uart6_ck", .ck_mode_mask = @@ -127,19 +67,6 @@ static struct uartinit uartinit_data[] __initdata = { .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, .mapbase = LPC32XX_UART6_BASE, }, -#endif -}; - -static struct platform_device serial_std_platform_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_std_platform_data, - }, -}; - -static struct platform_device *lpc32xx_serial_devs[] __initdata = { - &serial_std_platform_device, }; void __init lpc32xx_serial_init(void) @@ -156,15 +83,8 @@ void __init lpc32xx_serial_init(void) clk = clk_get(NULL, uartinit_data[i].uart_ck_name); if (!IS_ERR(clk)) { clk_enable(clk); - serial_std_platform_data[i].uartclk = - clk_get_rate(clk); } - /* Fall back on main osc rate if clock rate return fails */ - if (serial_std_platform_data[i].uartclk == 0) - serial_std_platform_data[i].uartclk = - LPC32XX_MAIN_OSC_FREQ; - /* Setup UART clock modes for all UARTs, disable autoclock */ clkmodes |= uartinit_data[i].ck_mode_mask; @@ -189,7 +109,7 @@ void __init lpc32xx_serial_init(void) __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { /* Force a flush of the RX FIFOs to work around a HW bug */ - puart = serial_std_platform_data[i].mapbase; + puart = uartinit_data[i].mapbase; __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); j = LPC32XX_SUART_FIFO_SIZE; @@ -198,11 +118,13 @@ void __init lpc32xx_serial_init(void) __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); } + /* Disable IrDA pulsing support on UART6 */ + tmp = __raw_readl(LPC32XX_UARTCTL_CTRL); + tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS; + __raw_writel(tmp, LPC32XX_UARTCTL_CTRL); + /* Disable UART5->USB transparent mode or USB won't work */ tmp = __raw_readl(LPC32XX_UARTCTL_CTRL); tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB; __raw_writel(tmp, LPC32XX_UARTCTL_CTRL); - - platform_add_devices(lpc32xx_serial_devs, - ARRAY_SIZE(lpc32xx_serial_devs)); } diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h deleted file mode 100644 index 0e135a599f3e..000000000000 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_MACH_GPIO_PXA_H -#define __ASM_MACH_GPIO_PXA_H - -#include <mach/addr-map.h> -#include <mach/cputype.h> -#include <mach/irqs.h> - -#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -#define gpio_to_bank(gpio) ((gpio) >> 5) - -/* NOTE: these macros are defined here to make optimization of - * gpio_{get,set}_value() to work when 'gpio' is a constant. - * Usage of these macros otherwise is no longer recommended, - * use generic GPIO API whenever possible. - */ -#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) - -#include <plat/gpio-pxa.h> - -#endif /* __ASM_MACH_GPIO_PXA_H */ diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h index c64dbb96dbad..eb187e0e059b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -31,5 +31,6 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 3674497162e3..e807c4c52a0b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -42,6 +42,7 @@ #define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 #define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 #define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 +#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000 #define MV78XX0_CORE_REGS_SIZE SZ_16K #define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) @@ -59,6 +60,7 @@ * Core-specific peripheral registers. */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) +#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE) /* * Register Map diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 91cf0625819c..ccdf83b17cf1 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -16,6 +16,7 @@ config SOC_IMX28 bool select ARM_AMBA select CPU_ARM926T + select HAVE_CAN_FLEXCAN if CAN select HAVE_PWM select PINCTRL_IMX28 diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot index 07b11fe6453f..4582999cf080 100644 --- a/arch/arm/mach-mxs/Makefile.boot +++ b/arch/arm/mach-mxs/Makefile.boot @@ -1 +1,10 @@ zreladdr-y += 0x40008000 + +dtb-y += imx23-evk.dtb \ + imx23-olinuxino.dtb \ + imx23-stmp378x_devb.dtb \ + imx28-apx4devkit.dtb \ + imx28-cfa10036.dtb \ + imx28-evk.dtb \ + imx28-m28evk.dtb \ + imx28-tx28.dtb \ diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index 9acdd6387047..9ee5cede3d42 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -10,7 +10,7 @@ */ #include <mach/mx23.h> #include <mach/devices-common.h> -#include <mach/mxsfb.h> +#include <linux/mxsfb.h> #include <linux/amba/bus.h> static inline int mx23_add_duart(void) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 84b2960df117..fcab431060f4 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -10,7 +10,7 @@ */ #include <mach/mx28.h> #include <mach/devices-common.h> -#include <mach/mxsfb.h> +#include <linux/mxsfb.h> #include <linux/amba/bus.h> static inline int mx28_add_duart(void) diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c index 5a75b7180f74..76b53f73418e 100644 --- a/arch/arm/mach-mxs/devices/platform-mxsfb.c +++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c @@ -10,7 +10,7 @@ #include <mach/mx23.h> #include <mach/mx28.h> #include <mach/devices-common.h> -#include <mach/mxsfb.h> +#include <linux/mxsfb.h> #ifdef CONFIG_SOC_IMX23 struct platform_device *__init mx23_add_mxsfb( diff --git a/arch/arm/mach-mxs/include/mach/mxsfb.h b/arch/arm/mach-mxs/include/mach/mxsfb.h deleted file mode 100644 index e4d79791515e..000000000000 --- a/arch/arm/mach-mxs/include/mach/mxsfb.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_FB_H -#define __MACH_FB_H - -#include <linux/fb.h> - -#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */ -#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */ -#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */ -#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */ - -#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6) -#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */ - -struct mxsfb_platform_data { - struct fb_videomode *mode_list; - unsigned mode_count; - - unsigned default_bpp; - - unsigned dotclk_delay; /* refer manual HW_LCDIF_VDCTRL4 register */ - unsigned ld_intf_width; /* refer STMLCDIF_* macros */ - - unsigned fb_size; /* Size of the video memory. If zero a - * default will be used - */ - unsigned long fb_phys; /* physical address for the video memory. If - * zero the framebuffer memory will be dynamically - * allocated. If specified,fb_size must also be specified. - * fb_phys must be unused by Linux. - */ -}; - -#endif /* __MACH_FB_H */ diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c index 5e90b9dcdef8..f5f061757deb 100644 --- a/arch/arm/mach-mxs/mach-apx4devkit.c +++ b/arch/arm/mach-mxs/mach-apx4devkit.c @@ -205,6 +205,16 @@ static int apx4devkit_phy_fixup(struct phy_device *phy) return 0; } +static void __init apx4devkit_fec_phy_clk_enable(void) +{ + struct clk *clk; + + /* Enable fec phy clock */ + clk = clk_get_sys("enet_out", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + static void __init apx4devkit_init(void) { mx28_soc_init(); @@ -225,6 +235,7 @@ static void __init apx4devkit_init(void) phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); + apx4devkit_fec_phy_clk_enable(); mx28_add_fec(0, &mx28_fec_pdata); mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 8cac94b33020..648bdd05d38b 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -16,12 +16,95 @@ #include <linux/init.h> #include <linux/init.h> #include <linux/irqdomain.h> +#include <linux/micrel_phy.h> +#include <linux/mxsfb.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/phy.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/common.h> +static struct fb_videomode mx23evk_video_modes[] = { + { + .name = "Samsung-LMS430HF02", + .refresh = 60, + .xres = 480, + .yres = 272, + .pixclock = 108096, /* picosecond (9.2 MHz) */ + .left_margin = 15, + .right_margin = 8, + .upper_margin = 12, + .lower_margin = 4, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static struct fb_videomode mx28evk_video_modes[] = { + { + .name = "Seiko-43WVF1G", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29851, /* picosecond (33.5 MHz) */ + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static struct fb_videomode m28evk_video_modes[] = { + { + .name = "Ampire AM-800480R2TMQW-T01H", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 30066, /* picosecond (33.26 MHz) */ + .left_margin = 0, + .right_margin = 256, + .upper_margin = 0, + .lower_margin = 45, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT, + }, +}; + +static struct fb_videomode apx4devkit_video_modes[] = { + { + .name = "HannStar PJ70112A", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 33333, /* picosecond (30.00 MHz) */ + .left_margin = 88, + .right_margin = 40, + .upper_margin = 32, + .lower_margin = 13, + .hsync_len = 48, + .vsync_len = 3, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | + FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static struct mxsfb_platform_data mxsfb_pdata __initdata; + +static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata), + OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata), + { /* sentinel */ } +}; + static int __init mxs_icoll_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { @@ -71,33 +154,155 @@ static struct sys_timer imx28_timer = { .init = imx28_timer_init, }; -static void __init imx28_evk_init(void) +enum mac_oui { + OUI_FSL, + OUI_DENX, +}; + +static void __init update_fec_mac_prop(enum mac_oui oui) +{ + struct device_node *np, *from = NULL; + struct property *oldmac, *newmac; + const u32 *ocotp = mxs_get_ocotp(); + u8 *macaddr; + u32 val; + int i; + + for (i = 0; i < 2; i++) { + np = of_find_compatible_node(from, NULL, "fsl,imx28-fec"); + if (!np) + return; + from = np; + + newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL); + if (!newmac) + return; + newmac->value = newmac + 1; + newmac->length = 6; + + newmac->name = kstrdup("local-mac-address", GFP_KERNEL); + if (!newmac->name) { + kfree(newmac); + return; + } + + /* + * OCOTP only stores the last 4 octets for each mac address, + * so hard-code OUI here. + */ + macaddr = newmac->value; + switch (oui) { + case OUI_FSL: + macaddr[0] = 0x00; + macaddr[1] = 0x04; + macaddr[2] = 0x9f; + break; + case OUI_DENX: + macaddr[0] = 0xc0; + macaddr[1] = 0xe5; + macaddr[2] = 0x4e; + break; + } + val = ocotp[i]; + macaddr[3] = (val >> 16) & 0xff; + macaddr[4] = (val >> 8) & 0xff; + macaddr[5] = (val >> 0) & 0xff; + + oldmac = of_find_property(np, newmac->name, NULL); + if (oldmac) + prom_update_property(np, newmac, oldmac); + else + prom_add_property(np, newmac); + } +} + +static void __init imx23_evk_init(void) +{ + mxsfb_pdata.mode_list = mx23evk_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; +} + +static inline void enable_clk_enet_out(void) { - struct clk *clk; + struct clk *clk = clk_get_sys("enet_out", NULL); - /* Enable fec phy clock */ - clk = clk_get_sys("enet_out", NULL); if (!IS_ERR(clk)) clk_prepare_enable(clk); } +static void __init imx28_evk_init(void) +{ + enable_clk_enet_out(); + update_fec_mac_prop(OUI_FSL); + + mxsfb_pdata.mode_list = mx28evk_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; +} + +static void __init m28evk_init(void) +{ + enable_clk_enet_out(); + update_fec_mac_prop(OUI_DENX); + + mxsfb_pdata.mode_list = m28evk_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes); + mxsfb_pdata.default_bpp = 16; + mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; +} + +static int apx4devkit_phy_fixup(struct phy_device *phy) +{ + phy->dev_flags |= MICREL_PHY_50MHZ_CLK; + return 0; +} + +static void __init apx4devkit_init(void) +{ + enable_clk_enet_out(); + + if (IS_BUILTIN(CONFIG_PHYLIB)) + phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, + apx4devkit_phy_fixup); + + mxsfb_pdata.mode_list = apx4devkit_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; +} + static void __init mxs_machine_init(void) { if (of_machine_is_compatible("fsl,imx28-evk")) imx28_evk_init(); + else if (of_machine_is_compatible("fsl,imx23-evk")) + imx23_evk_init(); + else if (of_machine_is_compatible("denx,m28evk")) + m28evk_init(); + else if (of_machine_is_compatible("bluegiga,apx4devkit")) + apx4devkit_init(); of_platform_populate(NULL, of_default_bus_match_table, - NULL, NULL); + mxs_auxdata_lookup, NULL); } static const char *imx23_dt_compat[] __initdata = { "fsl,imx23-evk", + "fsl,stmp378x_devb" + "olimex,imx23-olinuxino", "fsl,imx23", NULL, }; static const char *imx28_dt_compat[] __initdata = { + "bluegiga,apx4devkit", + "crystalfontz,cfa10036", + "denx,m28evk", "fsl,imx28-evk", + "karo,tx28", "fsl,imx28", NULL, }; diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 9a7b08b2a925..0f71f82101cc 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -11,7 +11,7 @@ #include <linux/gpio.h> #include <mach/iomux-mx28.h> -#include "../devices-mx28.h" +#include "devices-mx28.h" #include "module-tx28.h" diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index a6bbd1a7b4e7..a42c9a33d3bf 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,8 +7,6 @@ # Object file lists. -obj-y += clock.o - # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 2e8d3e176bc7..f4535a7dadf5 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -14,12 +14,14 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/amba/bus.h> +#include <linux/amba/mmci.h> #include <linux/interrupt.h> #include <linux/gpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/onenand.h> #include <linux/mtd/partitions.h> +#include <linux/i2c.h> #include <linux/io.h> #include <asm/hardware/vic.h> #include <asm/sizes.h> @@ -185,16 +187,28 @@ static void __init nhk8815_onenand_init(void) #endif } -static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE, - { IRQ_UART0 }, NULL); +static struct mmci_platform_data mmcsd_plat_data = { + .ocr_mask = MMC_VDD_29_30, + .f_max = 48000000, + .gpio_wp = -1, + .gpio_cd = 111, + .cd_invert = true, + .capabilities = MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA, +}; -static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE, - { IRQ_UART1 }, NULL); +static int __init nhk8815_mmcsd_init(void) +{ + int ret; -static struct amba_device *amba_devs[] __initdata = { - &uart0_device, - &uart1_device, -}; + ret = gpio_request(112, "card detect bias"); + if (ret) + return ret; + gpio_direction_output(112, 0); + amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180); + return 0; +} +module_init(nhk8815_mmcsd_init); static struct resource nhk8815_eth_resources[] = { { @@ -253,17 +267,46 @@ static struct sys_timer nomadik_timer = { .init = nomadik_timer_init, }; +static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = { + { + I2C_BOARD_INFO("stw4811", 0x2d), + }, +}; + +static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = { + { + I2C_BOARD_INFO("camera", 0x10), + }, + { + I2C_BOARD_INFO("stw5095", 0x1a), + }, + { + I2C_BOARD_INFO("lis3lv02dl", 0x1d), + }, +}; + +static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = { + { + I2C_BOARD_INFO("stw4811-usb", 0x2d), + }, +}; + static void __init nhk8815_platform_init(void) { - int i; - cpu8815_platform_init(); nhk8815_onenand_init(); platform_add_devices(nhk8815_platform_devices, ARRAY_SIZE(nhk8815_platform_devices)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); + amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0); + amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0); + + i2c_register_board_info(0, nhk8815_i2c0_devices, + ARRAY_SIZE(nhk8815_i2c0_devices)); + i2c_register_board_info(1, nhk8815_i2c1_devices, + ARRAY_SIZE(nhk8815_i2c1_devices)); + i2c_register_board_info(2, nhk8815_i2c2_devices, + ARRAY_SIZE(nhk8815_i2c2_devices)); } MACHINE_START(NOMADIK, "NHK8815") diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c deleted file mode 100644 index 48a59f24e10c..000000000000 --- a/arch/arm/mach-nomadik/clock.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/arch/arm/mach-nomadik/clock.c - * - * Copyright (C) 2009 Alessandro Rubini - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include "clock.h" - -/* - * The nomadik board uses generic clocks, but the serial pl011 file - * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them - */ -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -/* enable and disable do nothing */ -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -static struct clk clk_24 = { - .rate = 2400000, -}; - -static struct clk clk_48 = { - .rate = 48 * 1000 * 1000, -}; - -/* - * Catch-all default clock to satisfy drivers using the clk API. We don't - * model the actual hardware clocks yet. - */ -static struct clk clk_default; - -#define CLK(_clk, dev) \ - { \ - .clk = _clk, \ - .dev_id = dev, \ - } - -static struct clk_lookup lookups[] = { - { - .con_id = "apb_pclk", - .clk = &clk_default, - }, - CLK(&clk_24, "mtu0"), - CLK(&clk_24, "mtu1"), - CLK(&clk_48, "uart0"), - CLK(&clk_48, "uart1"), - CLK(&clk_default, "gpio.0"), - CLK(&clk_default, "gpio.1"), - CLK(&clk_default, "gpio.2"), - CLK(&clk_default, "gpio.3"), - CLK(&clk_default, "rng"), -}; - -int __init clk_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - return 0; -} diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h deleted file mode 100644 index 78da2e7c3985..000000000000 --- a/arch/arm/mach-nomadik/clock.h +++ /dev/null @@ -1,15 +0,0 @@ - -/* - * linux/arch/arm/mach-nomadik/clock.h - * - * Copyright (C) 2009 Alessandro Rubini - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct clk { - unsigned long rate; -}; - -int __init clk_init(void); diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 27f43a46985e..6fd8e46567a4 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -22,6 +22,10 @@ #include <linux/amba/bus.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/dma-mapping.h> +#include <linux/platform_data/clk-nomadik.h> #include <plat/gpio-nomadik.h> #include <mach/hardware.h> @@ -32,91 +36,63 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> -#include "clock.h" #include "cpu-8815.h" -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} - /* The 8815 has 4 GPIO blocks, let's register them immediately */ - -#define GPIO_RESOURCE(block) \ - { \ - .start = NOMADIK_GPIO##block##_BASE, \ - .end = NOMADIK_GPIO##block##_BASE + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = IRQ_GPIO##block, \ - .end = IRQ_GPIO##block, \ - .flags = IORESOURCE_IRQ, \ - } - -#define GPIO_DEVICE(block) \ - { \ - .name = "gpio", \ - .id = block, \ - .num_resources = 2, \ - .resource = &cpu8815_gpio_resources[block * 2], \ - .dev = { \ - .platform_data = &cpu8815_gpio[block], \ - }, \ - } - -static struct nmk_gpio_platform_data cpu8815_gpio[] = { - { - .name = "GPIO-0-31", - .first_gpio = 0, - .first_irq = NOMADIK_GPIO_TO_IRQ(0), - }, { - .name = "GPIO-32-63", - .first_gpio = 32, - .first_irq = NOMADIK_GPIO_TO_IRQ(32), - }, { - .name = "GPIO-64-95", - .first_gpio = 64, - .first_irq = NOMADIK_GPIO_TO_IRQ(64), - }, { - .name = "GPIO-96-127", /* 124..127 not routed to pin */ - .first_gpio = 96, - .first_irq = NOMADIK_GPIO_TO_IRQ(96), - } +static resource_size_t __initdata cpu8815_gpio_base[] = { + NOMADIK_GPIO0_BASE, + NOMADIK_GPIO1_BASE, + NOMADIK_GPIO2_BASE, + NOMADIK_GPIO3_BASE, }; -static struct resource cpu8815_gpio_resources[] = { - GPIO_RESOURCE(0), - GPIO_RESOURCE(1), - GPIO_RESOURCE(2), - GPIO_RESOURCE(3), -}; - -static struct platform_device cpu8815_platform_gpio[] = { - GPIO_DEVICE(0), - GPIO_DEVICE(1), - GPIO_DEVICE(2), - GPIO_DEVICE(3), -}; +static struct platform_device * +cpu8815_add_gpio(int id, resource_size_t addr, int irq, + struct nmk_gpio_platform_data *pdata) +{ + struct resource resources[] = { + { + .start = addr, + .end = addr + 127, + .flags = IORESOURCE_MEM, + }, + { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + } + }; + + return platform_device_register_resndata(NULL, "gpio", id, + resources, ARRAY_SIZE(resources), + pdata, sizeof(*pdata)); +} -static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL); +void cpu8815_add_gpios(resource_size_t *base, int num, int irq, + struct nmk_gpio_platform_data *pdata) +{ + int first = 0; + int i; -static struct platform_device *platform_devs[] __initdata = { - cpu8815_platform_gpio + 0, - cpu8815_platform_gpio + 1, - cpu8815_platform_gpio + 2, - cpu8815_platform_gpio + 3, -}; + for (i = 0; i < num; i++, first += 32, irq++) { + pdata->first_gpio = first; + pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); + pdata->num_gpio = 32; -static struct amba_device *amba_devs[] __initdata = { - &cpu8815_amba_rng_device -}; + cpu8815_add_gpio(i, base[i], irq, pdata); + } +} static int __init cpu8815_init(void) { - int i; - - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); + struct nmk_gpio_platform_data pdata = { + /* No custom data yet */ + }; + + cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base), + IRQ_GPIO0, &pdata); + amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0); + amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0); return 0; } arch_initcall(cpu8815_init); @@ -147,7 +123,7 @@ void __init cpu8815_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - clk_init(); + nomadik_clk_init(); } /* diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index 0fc2f6f1cc97..6d14454d4609 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -5,6 +5,7 @@ #include <linux/i2c-gpio.h> #include <linux/platform_device.h> #include <plat/gpio-nomadik.h> +#include <plat/pincfg.h> /* * There are two busses in the 8815NHK. @@ -12,19 +13,27 @@ * use bit-bang through GPIO by now, to keep things simple */ +/* I2C0 connected to the STw4811 power management chip */ static struct i2c_gpio_platform_data nhk8815_i2c_data0 = { /* keep defaults for timeouts; pins are push-pull bidirectional */ .scl_pin = 62, .sda_pin = 63, }; +/* I2C1 connected to various sensors */ static struct i2c_gpio_platform_data nhk8815_i2c_data1 = { /* keep defaults for timeouts; pins are push-pull bidirectional */ .scl_pin = 53, .sda_pin = 54, }; -/* first bus: GPIO XX and YY */ +/* I2C2 connected to the USB portions of the STw4811 only */ +static struct i2c_gpio_platform_data nhk8815_i2c_data2 = { + /* keep defaults for timeouts; pins are push-pull bidirectional */ + .scl_pin = 73, + .sda_pin = 74, +}; + static struct platform_device nhk8815_i2c_dev0 = { .name = "i2c-gpio", .id = 0, @@ -32,7 +41,7 @@ static struct platform_device nhk8815_i2c_dev0 = { .platform_data = &nhk8815_i2c_data0, }, }; -/* second bus: GPIO XX and YY */ + static struct platform_device nhk8815_i2c_dev1 = { .name = "i2c-gpio", .id = 1, @@ -41,15 +50,29 @@ static struct platform_device nhk8815_i2c_dev1 = { }, }; +static struct platform_device nhk8815_i2c_dev2 = { + .name = "i2c-gpio", + .id = 2, + .dev = { + .platform_data = &nhk8815_i2c_data2, + }, +}; + +static pin_cfg_t cpu8815_pins_i2c[] = { + PIN_CFG_INPUT(62, GPIO, PULLUP), + PIN_CFG_INPUT(63, GPIO, PULLUP), + PIN_CFG_INPUT(53, GPIO, PULLUP), + PIN_CFG_INPUT(54, GPIO, PULLUP), + PIN_CFG_INPUT(73, GPIO, PULLUP), + PIN_CFG_INPUT(74, GPIO, PULLUP), +}; + static int __init nhk8815_i2c_init(void) { - nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO); - nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO); + nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c)); platform_device_register(&nhk8815_i2c_dev0); - - nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO); - nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO); platform_device_register(&nhk8815_i2c_dev1); + platform_device_register(&nhk8815_i2c_dev2); return 0; } @@ -58,6 +81,7 @@ static void __exit nhk8815_i2c_exit(void) { platform_device_unregister(&nhk8815_i2c_dev0); platform_device_unregister(&nhk8815_i2c_dev1); + platform_device_unregister(&nhk8815_i2c_dev2); return; } diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h index 8faabc560398..a118e615f865 100644 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ b/arch/arm/mach-nomadik/include/mach/irqs.h @@ -22,56 +22,56 @@ #include <mach/hardware.h> -#define IRQ_VIC_START 0 /* first VIC interrupt is 0 */ +#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */ /* * Interrupt numbers generic for all Nomadik Chip cuts */ -#define IRQ_WATCHDOG 0 -#define IRQ_SOFTINT 1 -#define IRQ_CRYPTO 2 -#define IRQ_OWM 3 -#define IRQ_MTU0 4 -#define IRQ_MTU1 5 -#define IRQ_GPIO0 6 -#define IRQ_GPIO1 7 -#define IRQ_GPIO2 8 -#define IRQ_GPIO3 9 -#define IRQ_RTC_RTT 10 -#define IRQ_SSP 11 -#define IRQ_UART0 12 -#define IRQ_DMA1 13 -#define IRQ_CLCD_MDIF 14 -#define IRQ_DMA0 15 -#define IRQ_PWRFAIL 16 -#define IRQ_UART1 17 -#define IRQ_FIRDA 18 -#define IRQ_MSP0 19 -#define IRQ_I2C0 20 -#define IRQ_I2C1 21 -#define IRQ_SDMMC 22 -#define IRQ_USBOTG 23 -#define IRQ_SVA_IT0 24 -#define IRQ_SVA_IT1 25 -#define IRQ_SAA_IT0 26 -#define IRQ_SAA_IT1 27 -#define IRQ_UART2 28 -#define IRQ_MSP2 31 -#define IRQ_L2CC 48 -#define IRQ_HPI 49 -#define IRQ_SKE 50 -#define IRQ_KP 51 -#define IRQ_MEMST 54 -#define IRQ_SGA_IT 58 -#define IRQ_USBM 60 -#define IRQ_MSP1 62 +#define IRQ_WATCHDOG 1 +#define IRQ_SOFTINT 2 +#define IRQ_CRYPTO 3 +#define IRQ_OWM 4 +#define IRQ_MTU0 5 +#define IRQ_MTU1 6 +#define IRQ_GPIO0 7 +#define IRQ_GPIO1 8 +#define IRQ_GPIO2 9 +#define IRQ_GPIO3 10 +#define IRQ_RTC_RTT 11 +#define IRQ_SSP 12 +#define IRQ_UART0 13 +#define IRQ_DMA1 14 +#define IRQ_CLCD_MDIF 15 +#define IRQ_DMA0 16 +#define IRQ_PWRFAIL 17 +#define IRQ_UART1 18 +#define IRQ_FIRDA 19 +#define IRQ_MSP0 20 +#define IRQ_I2C0 21 +#define IRQ_I2C1 22 +#define IRQ_SDMMC 23 +#define IRQ_USBOTG 24 +#define IRQ_SVA_IT0 25 +#define IRQ_SVA_IT1 26 +#define IRQ_SAA_IT0 27 +#define IRQ_SAA_IT1 28 +#define IRQ_UART2 29 +#define IRQ_MSP2 30 +#define IRQ_L2CC 49 +#define IRQ_HPI 50 +#define IRQ_SKE 51 +#define IRQ_KP 52 +#define IRQ_MEMST 55 +#define IRQ_SGA_IT 59 +#define IRQ_USBM 61 +#define IRQ_MSP1 63 -#define NOMADIK_SOC_NR_IRQS 64 +#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64) /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */ -#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_SOC_NR_IRQS) -#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_SOC_NR_IRQS) +#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET) +#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET) #define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) /* Following two are used by entry_macro.S, to access our dual-vic */ @@ -79,4 +79,3 @@ #define VIC_REG_IRQSR1 0x20 #endif /* __ASM_ARCH_IRQS_H */ - diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 90d0f85afba5..dd0fbf76ac79 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -39,6 +39,7 @@ config ARCH_OMAP3 select CPU_V7 select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARCH_HAS_OPP + select PM_RUNTIME if CPU_IDLE select PM_OPP if PM select ARM_CPU_SUSPEND if PM select MULTI_IRQ_HANDLER @@ -57,6 +58,7 @@ config ARCH_OMAP4 select PL310_ERRATA_727915 select ARM_ERRATA_720789 select ARCH_HAS_OPP + select PM_RUNTIME if CPU_IDLE select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 238c5a3954b8..b779ddd86faf 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -71,10 +71,8 @@ ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o -obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o -obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o @@ -88,6 +86,11 @@ endif endif +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +endif + # PRCM omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index 447682c4e11c..2c90ac686686 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -15,27 +15,13 @@ * General Public License for more details. */ -#include <linux/clk.h> +#include <linux/err.h> #include <linux/davinci_emac.h> -#include <linux/platform_device.h> -#include <plat/irqs.h> +#include <asm/system.h> +#include <plat/omap_device.h> #include <mach/am35xx.h> - #include "control.h" - -static struct mdio_platform_data am35xx_emac_mdio_pdata; - -static struct resource am35xx_emac_mdio_resources[] = { - DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K), -}; - -static struct platform_device am35xx_emac_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources), - .resource = am35xx_emac_mdio_resources, - .dev.platform_data = &am35xx_emac_mdio_pdata, -}; +#include "am35xx-emac.h" static void am35xx_enable_emac_int(void) { @@ -69,41 +55,57 @@ static struct emac_platform_data am35xx_emac_pdata = { .interrupt_disable = am35xx_disable_emac_int, }; -static struct resource am35xx_emac_resources[] = { - DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ), -}; +static struct mdio_platform_data am35xx_mdio_pdata; -static struct platform_device am35xx_emac_device = { - .name = "davinci_emac", - .id = -1, - .num_resources = ARRAY_SIZE(am35xx_emac_resources), - .resource = am35xx_emac_resources, - .dev = { - .platform_data = &am35xx_emac_pdata, - }, -}; +static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh, + void *pdata, int pdata_len) +{ + struct platform_device *pdev; + + pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len, + NULL, 0, false); + if (IS_ERR(pdev)) { + WARN(1, "Can't build omap_device for %s:%s.\n", + oh->class->name, oh->name); + return PTR_ERR(pdev); + } + + return 0; +} void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) { + struct omap_hwmod *oh; u32 v; - int err; + int ret; - am35xx_emac_pdata.rmii_en = rmii_en; - am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq; - err = platform_device_register(&am35xx_emac_device); - if (err) { - pr_err("AM35x: failed registering EMAC device: %d\n", err); + oh = omap_hwmod_lookup("davinci_mdio"); + if (!oh) { + pr_err("Could not find davinci_mdio hwmod\n"); + return; + } + + am35xx_mdio_pdata.bus_freq = mdio_bus_freq; + + ret = omap_davinci_emac_dev_init(oh, &am35xx_mdio_pdata, + sizeof(am35xx_mdio_pdata)); + if (ret) { + pr_err("Could not build davinci_mdio hwmod device\n"); return; } - err = platform_device_register(&am35xx_emac_mdio_device); - if (err) { - pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err); - platform_device_unregister(&am35xx_emac_device); + oh = omap_hwmod_lookup("davinci_emac"); + if (!oh) { + pr_err("Could not find davinci_emac hwmod\n"); + return; + } + + am35xx_emac_pdata.rmii_en = rmii_en; + + ret = omap_davinci_emac_dev_init(oh, &am35xx_emac_pdata, + sizeof(am35xx_emac_pdata)); + if (ret) { + pr_err("Could not build davinci_emac hwmod device\n"); return; } diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 6523aeabf9f2..9511584fdc4f 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -218,9 +218,6 @@ static struct twl4030_gpio_platform_data sdp2430_gpio_data = { }; static struct twl4030_platform_data sdp2430_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &sdp2430_gpio_data, .vmmc1 = &sdp2430_vmmc1, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 580fd17208da..6202fc76e490 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -433,7 +433,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 932e1778aff9..fca93d1afd43 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -93,9 +93,6 @@ static struct twl4030_usb_data omap3logic_usb_data = { static struct twl4030_platform_data omap3logic_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &omap3logic_gpio_data, .vmmc1 = &omap3logic_vmmc1, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 8fa2fc3a4c3c..779734d8ba37 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -494,8 +494,8 @@ static void __init overo_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_hsmmc_init(mmc); overo_i2c_init(); + omap_hsmmc_init(mmc); omap_display_init(&overo_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 7300982a8e0e..c3e91d0dd2f2 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -2490,13 +2490,13 @@ static struct clk uart4_fck = { }; static struct clk uart4_fck_am35xx = { - .name = "uart4_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART4_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = AM35XX_EN_UART4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, }; static struct clk gpt2_fck = { @@ -3201,8 +3201,12 @@ static struct clk vpfe_fck = { }; /* - * The UART1/2 functional clock acts as the functional - * clock for UART4. No separate fclk control available. + * The UART1/2 functional clock acts as the functional clock for + * UART4. No separate fclk control available. XXX Well now we have a + * uart4_fck that is apparently used as the UART4 functional clock, + * but it also seems that uart1_fck or uart2_fck are still needed, at + * least for UART4 softresets to complete. This really needs + * clarification. */ static struct clk uart4_ick_am35xx = { .name = "uart4_ick", @@ -3464,12 +3468,12 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", NULL, &emac_ick, CK_AM35XX), + CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX), CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), - CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), - CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX), + CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx, CK_AM35XX), CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 0a8c7b67858c..5601dc13785e 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -31,12 +31,16 @@ * * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this * clockdomain. (Currently, this applies to OMAP3 clockdomains only.) + * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is + * active whenever the MPU is active. True for interconnects and + * the WKUP clockdomains. */ #define CLKDM_CAN_FORCE_SLEEP (1 << 0) #define CLKDM_CAN_FORCE_WAKEUP (1 << 1) #define CLKDM_CAN_ENABLE_AUTO (1 << 2) #define CLKDM_CAN_DISABLE_AUTO (1 << 3) #define CLKDM_NO_AUTODEPS (1 << 4) +#define CLKDM_ACTIVE_WITH_MPU (1 << 5) #define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) #define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index 839145e1cfbe..4972219653ce 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = { .name = "wkup_clkdm", .pwrdm = { .name = "wkup_pwrdm" }, .dep_bit = OMAP_EN_WKUP_SHIFT, + .flags = CLKDM_ACTIVE_WITH_MPU, }; diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 2cdc17c9d2fa..56089c49142a 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -59,6 +59,12 @@ static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = { { NULL }, }; +static struct clkdm_dep gfx_sgx_am35x_wkdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */ static struct clkdm_dep per_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -69,6 +75,14 @@ static struct clkdm_dep per_wkdeps[] = { { NULL }, }; +static struct clkdm_dep per_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */ static struct clkdm_dep usbhost_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -79,6 +93,14 @@ static struct clkdm_dep usbhost_wkdeps[] = { { NULL }, }; +static struct clkdm_dep usbhost_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */ static struct clkdm_dep mpu_3xxx_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -89,6 +111,14 @@ static struct clkdm_dep mpu_3xxx_wkdeps[] = { { NULL }, }; +static struct clkdm_dep mpu_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "dss_clkdm" }, + { .clkdm_name = "per_clkdm" }, + { NULL }, +}; + /* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */ static struct clkdm_dep iva2_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -116,6 +146,12 @@ static struct clkdm_dep dss_wkdeps[] = { { NULL }, }; +static struct clkdm_dep dss_am35x_wkdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430: PM_WKDEP_NEON: MPU */ static struct clkdm_dep neon_wkdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -131,6 +167,11 @@ static struct clkdm_dep dss_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep dss_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430: CM_SLEEPDEP_PER: MPU, IVA */ static struct clkdm_dep per_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -138,6 +179,11 @@ static struct clkdm_dep per_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep per_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */ static struct clkdm_dep usbhost_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -145,6 +191,11 @@ static struct clkdm_dep usbhost_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep usbhost_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430: CM_SLEEPDEP_CAM: MPU */ static struct clkdm_dep cam_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -175,6 +226,15 @@ static struct clockdomain mpu_3xxx_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, }; +static struct clockdomain mpu_am35x_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, + .dep_bit = OMAP3430_EN_MPU_SHIFT, + .wkdep_srcs = mpu_am35x_wkdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, +}; + static struct clockdomain neon_clkdm = { .name = "neon_clkdm", .pwrdm = { .name = "neon_pwrdm" }, @@ -210,6 +270,15 @@ static struct clockdomain sgx_clkdm = { .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, }; +static struct clockdomain sgx_am35x_clkdm = { + .name = "sgx_clkdm", + .pwrdm = { .name = "sgx_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = gfx_sgx_am35x_wkdeps, + .sleepdep_srcs = gfx_sgx_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, +}; + /* * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but * then that information was removed from the 34xx ES2+ TRM. It is @@ -261,6 +330,16 @@ static struct clockdomain dss_3xxx_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, }; +static struct clockdomain dss_am35x_clkdm = { + .name = "dss_clkdm", + .pwrdm = { .name = "dss_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT, + .wkdep_srcs = dss_am35x_wkdeps, + .sleepdep_srcs = dss_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, +}; + static struct clockdomain cam_clkdm = { .name = "cam_clkdm", .pwrdm = { .name = "cam_pwrdm" }, @@ -279,6 +358,15 @@ static struct clockdomain usbhost_clkdm = { .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, }; +static struct clockdomain usbhost_am35x_clkdm = { + .name = "usbhost_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = usbhost_am35x_wkdeps, + .sleepdep_srcs = usbhost_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, +}; + static struct clockdomain per_clkdm = { .name = "per_clkdm", .pwrdm = { .name = "per_pwrdm" }, @@ -289,6 +377,16 @@ static struct clockdomain per_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, }; +static struct clockdomain per_am35x_clkdm = { + .name = "per_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_EN_PER_SHIFT, + .wkdep_srcs = per_am35x_wkdeps, + .sleepdep_srcs = per_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, +}; + /* * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is * switched of even if sdti is in use @@ -341,29 +439,42 @@ static struct clkdm_autodep clkdm_autodeps[] = { } }; +static struct clkdm_autodep clkdm_am35x_autodeps[] = { + { + .clkdm = { .name = "mpu_clkdm" }, + }, + { + .clkdm = { .name = NULL }, + } +}; + /* * */ -static struct clockdomain *clockdomains_omap3430_common[] __initdata = { +static struct clockdomain *clockdomains_common[] __initdata = { &wkup_common_clkdm, - &mpu_3xxx_clkdm, &neon_clkdm, - &iva2_clkdm, - &d2d_clkdm, &core_l3_3xxx_clkdm, &core_l4_3xxx_clkdm, - &dss_3xxx_clkdm, - &cam_clkdm, - &per_clkdm, &emu_clkdm, &dpll1_clkdm, - &dpll2_clkdm, &dpll3_clkdm, &dpll4_clkdm, NULL }; +static struct clockdomain *clockdomains_omap3430[] __initdata = { + &mpu_3xxx_clkdm, + &iva2_clkdm, + &d2d_clkdm, + &dss_3xxx_clkdm, + &cam_clkdm, + &per_clkdm, + &dpll2_clkdm, + NULL +}; + static struct clockdomain *clockdomains_omap3430es1[] __initdata = { &gfx_3430es1_clkdm, NULL, @@ -376,21 +487,41 @@ static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = { NULL, }; +static struct clockdomain *clockdomains_am35x[] __initdata = { + &mpu_am35x_clkdm, + &sgx_am35x_clkdm, + &dss_am35x_clkdm, + &per_am35x_clkdm, + &usbhost_am35x_clkdm, + &dpll5_clkdm, + NULL +}; + void __init omap3xxx_clockdomains_init(void) { struct clockdomain **sc; + unsigned int rev; if (!cpu_is_omap34xx()) return; clkdm_register_platform_funcs(&omap3_clkdm_operations); - clkdm_register_clkdms(clockdomains_omap3430_common); + clkdm_register_clkdms(clockdomains_common); - sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 : - clockdomains_omap3430es2plus; + rev = omap_rev(); - clkdm_register_clkdms(sc); + if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { + clkdm_register_clkdms(clockdomains_am35x); + clkdm_register_autodeps(clkdm_am35x_autodeps); + } else { + clkdm_register_clkdms(clockdomains_omap3430); + + sc = (rev == OMAP3430_REV_ES1_0) ? + clockdomains_omap3430es1 : clockdomains_omap3430es2plus; + + clkdm_register_clkdms(sc); + clkdm_register_autodeps(clkdm_autodeps); + } - clkdm_register_autodeps(clkdm_autodeps); clkdm_complete_init(); } diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index bd7ed13515cc..63d60a773d3b 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = { .cm_inst = OMAP4430_PRM_WKUP_CM_INST, .clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS, .dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU, }; static struct clockdomain emu_sys_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 8083a8cdc55f..766338fe4d34 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -169,8 +169,6 @@ /* AM35XX specific CM_ICLKEN1_CORE bits */ #define AM35XX_EN_IPSS_MASK (1 << 4) #define AM35XX_EN_IPSS_SHIFT 4 -#define AM35XX_EN_UART4_MASK (1 << 23) -#define AM35XX_EN_UART4_SHIFT 23 /* CM_ICLKEN2_CORE */ #define OMAP3430_EN_PKA_MASK (1 << 4) @@ -207,6 +205,8 @@ #define OMAP3430_ST_DES2_MASK (1 << 26) #define OMAP3430_ST_MSPRO_SHIFT 23 #define OMAP3430_ST_MSPRO_MASK (1 << 23) +#define AM35XX_ST_UART4_SHIFT 23 +#define AM35XX_ST_UART4_MASK (1 << 23) #define OMAP3430_ST_HDQ_SHIFT 22 #define OMAP3430_ST_HDQ_MASK (1 << 22) #define OMAP3430ES1_ST_FAC_SHIFT 8 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 1706ebcec08d..c1875862679f 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -63,28 +63,30 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - if (board_pdata && board_pdata->get_pendown_state) { - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } - gpio_export(gpio_pendown, 0); - - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; } + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; spi_bi->platform_data = board_pdata; + if (board_pdata->get_pendown_state) + gpio_export(gpio_pendown, 0); } else { ads7846_config.gpio_pendown = gpio_pendown; } + if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) + gpio_free(gpio_pendown); + spi_register_board_info(&ads7846_spi_board_info, 1); } #else diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 207bc1c7759f..31344528eb54 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,8 +36,6 @@ #include "control.h" #include "common.h" -#ifdef CONFIG_CPU_IDLE - /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { u32 mpu_state; @@ -379,9 +377,3 @@ int __init omap3_idle_init(void) return 0; } -#else -int __init omap3_idle_init(void) -{ - return 0; -} -#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index be1617ca84bd..02d15bbd4e35 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -22,8 +22,6 @@ #include "pm.h" #include "prm.h" -#ifdef CONFIG_CPU_IDLE - /* Machine specific information */ struct omap4_idle_statedata { u32 cpu_state; @@ -199,9 +197,3 @@ int __init omap4_idle_init(void) return 0; } -#else -int __init omap4_idle_init(void) -{ - return 0; -} -#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index be3e059a4017..71651e20a43e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -772,7 +772,7 @@ static int __init omap_init_wdt(void) char *oh_name = "wd_timer2"; char *dev_name = "omap_wdt"; - if (!cpu_class_is_omap2()) + if (!cpu_class_is_omap2() || of_have_populated_dt()) return 0; oh = omap_hwmod_lookup(oh_name); diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h index f1e13d1ca5e7..95594495fcf6 100644 --- a/arch/arm/mach-omap2/include/mach/am35xx.h +++ b/arch/arm/mach-omap2/include/mach/am35xx.h @@ -36,6 +36,8 @@ #define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0) #define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000) #define AM35XX_EMAC_MDIO_OFFSET (0x30000) +#define AM35XX_IPSS_MDIO_BASE (AM35XX_IPSS_EMAC_BASE + \ + AM35XX_EMAC_MDIO_OFFSET) #define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000) #define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \ AM3517_EMAC_CNTRL_RAM_OFFSET) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 8467beb122b5..bcd83db41bbc 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -263,7 +263,7 @@ int __init intc_of_init(struct device_node *node, struct device_node *parent) { struct resource res; - u32 nr_irqs = 96; + u32 nr_irq = 96; if (WARN_ON(!node)) return -ENODEV; @@ -273,10 +273,10 @@ int __init intc_of_init(struct device_node *node, return -EINVAL; } - if (of_property_read_u32(node, "ti,intc-size", &nr_irqs)) - pr_warn("unable to get intc-size, default to %d\n", nr_irqs); + if (of_property_read_u32(node, "ti,intc-size", &nr_irq)) + pr_warn("unable to get intc-size, default to %d\n", nr_irq); - omap_init_irq(res.start, nr_irqs, of_node_get(node)); + omap_init_irq(res.start, nr_irq, of_node_get(node)); return 0; } diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 19b8b6774862..6875be837d9f 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -83,8 +83,6 @@ static int omap2_mbox_startup(struct omap_mbox *mbox) l = mbox_read_reg(MAILBOX_REVISION); pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - omap2_mbox_enable_irq(mbox, IRQ_RX); - return 0; } diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index ac49384d0285..1be8bcb52e93 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -73,19 +73,17 @@ static struct iommu_device omap4_devices[] = { .da_end = 0xFFFFF000, }, }, -#if defined(CONFIG_MPU_TESLA_IOMMU) { .base = OMAP4_MMU2_BASE, - .irq = INT_44XX_DSP_MMU, + .irq = OMAP44XX_IRQ_TESLA_MMU, .pdata = { .name = "tesla", .nr_tlb_entries = 32, - .clk_name = "tesla_ick", + .clk_name = "dsp_fck", .da_start = 0x0, .da_end = 0xFFFFF000, }, }, -#endif }; #define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices) static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES]; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2ada3642c671..3f21568f1753 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1188,15 +1188,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * - * If module is marked as SWSUP_SIDLE, force the module out of slave - * idle; otherwise, configure it for smart-idle. If module is marked - * as SWSUP_MSUSPEND, force the module out of master standby; - * otherwise, configure it for smart-standby. No return value. + * Ensure that the OCP_SYSCONFIG register for the IP block represented + * by @oh is set to indicate to the PRCM that the IP block is active. + * Usually this means placing the module into smart-idle mode and + * smart-standby, but if there is a bug in the automatic idle handling + * for the IP block, it may need to be placed into the force-idle or + * no-idle variants of these modes. No return value. */ static void _enable_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; + bool clkdm_act; if (!oh->class->sysc) return; @@ -1205,8 +1208,16 @@ static void _enable_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + clkdm_act = ((oh->clkdm && + oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) || + (oh->_clk && oh->_clk->clkdm && + oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU)); + if (clkdm_act && !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? + HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } @@ -1272,8 +1283,13 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART; + /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ + if (oh->flags & HWMOD_SWSUP_SIDLE || + !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 6491e057d9ce..cdb9637aab19 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -519,11 +519,27 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { { .irq = INT_35XX_UART4_IRQ, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, }, { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, }, + { .dma_req = -1 } +}; + +/* + * XXX AM35xx UART4 cannot complete its softreset without uart1_fck or + * uart2_fck being enabled. So we add uart1_fck as an optional clock, + * below, and set the HWMOD_CONTROL_OPT_CLKS_IN_RESET. This really + * should not be needed. The functional clock structure of the AM35xx + * UART4 is extremely unclear and opaque; it is unclear what the role + * of uart1/2_fck is for the UART4. Any clarification from either + * empirical testing or the AM3505/3517 hardware designers would be + * most welcome. + */ +static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = { + { .role = "softreset_uart1_fck", .clk = "uart1_fck" }, }; static struct omap_hwmod am35xx_uart4_hwmod = { @@ -535,11 +551,14 @@ static struct omap_hwmod am35xx_uart4_hwmod = { .omap2 = { .module_offs = CORE_MOD, .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_UART4_SHIFT, + .module_bit = AM35XX_EN_UART4_SHIFT, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT, + .idlest_idle_bit = AM35XX_ST_UART4_SHIFT, }, }, + .opt_clks = am35xx_uart4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(am35xx_uart4_opt_clks), + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap2_uart_class, }; @@ -1651,25 +1670,20 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { /* usb_otg_hs */ static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 71 }, { .irq = -1 } }; static struct omap_hwmod_class am35xx_usbotg_class = { .name = "am35xx_usbotg", - .sysc = NULL, }; static struct omap_hwmod am35xx_usbhsotg_hwmod = { .name = "am35x_otg_hs", .mpu_irqs = am35xx_usbhsotg_mpu_irqs, - .main_clk = NULL, - .prcm = { - .omap2 = { - }, - }, + .main_clk = "hsotgusb_fck", .class = &am35xx_usbotg_class, + .flags = HWMOD_NO_IDLEST, }; /* MMC/SD/SDIO common */ @@ -2110,9 +2124,10 @@ static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = { .master = &am35xx_usbhsotg_hwmod, .slave = &omap3xxx_l3_main_hwmod, - .clk = "core_l3_ick", + .clk = "hsotgusb_ick", .user = OCP_USER_MPU, }; + /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .master = &omap3xxx_l4_core_hwmod, @@ -2256,6 +2271,7 @@ static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { @@ -2406,7 +2422,7 @@ static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_usbhsotg_hwmod, - .clk = "l4_ick", + .clk = "hsotgusb_ick", .addr = am35xx_usbhsotg_addrs, .user = OCP_USER_MPU, }; @@ -3151,6 +3167,107 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* am35xx has Davinci MDIO & EMAC */ +static struct omap_hwmod_class am35xx_mdio_class = { + .name = "davinci_mdio", +}; + +static struct omap_hwmod am35xx_mdio_hwmod = { + .name = "davinci_mdio", + .class = &am35xx_mdio_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_mdio__l3 = { + .master = &am35xx_mdio_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_fck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_mdio_addrs[] = { + { + .pa_start = AM35XX_IPSS_MDIO_BASE, + .pa_end = AM35XX_IPSS_MDIO_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci mdio */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_mdio_hwmod, + .clk = "emac_fck", + .addr = am35xx_mdio_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { + { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ }, + { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ }, + { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ }, + { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ }, + { .irq = -1 } +}; + +static struct omap_hwmod_class am35xx_emac_class = { + .name = "davinci_emac", +}; + +static struct omap_hwmod am35xx_emac_hwmod = { + .name = "davinci_emac", + .mpu_irqs = am35xx_emac_mpu_irqs, + .class = &am35xx_emac_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* l3_core -> davinci emac interface */ +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_emac__l3 = { + .master = &am35xx_emac_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_ick", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_emac_addrs[] = { + { + .pa_start = AM35XX_IPSS_EMAC_BASE, + .pa_end = AM35XX_IPSS_EMAC_BASE + 0x30000 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci emac */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__emac = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_emac_hwmod, + .clk = "emac_ick", + .addr = am35xx_emac_addrs, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3279,6 +3396,10 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__usb_tll_hs, &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, + &am35xx_mdio__l3, + &am35xx_l4_core__mdio, + &am35xx_emac__l3, + &am35xx_l4_core__emac, NULL }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 1b1d04141c3d..5c2ce7e77838 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1928,7 +1928,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp1_hwmod = { @@ -1963,7 +1963,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp2_hwmod = { @@ -1998,7 +1998,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp3_hwmod = { @@ -2033,7 +2033,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp4_hwmod = { @@ -3855,7 +3855,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { }; /* usb_host_fs -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = { .master = &omap44xx_usb_host_fs_hwmod, .slave = &omap44xx_l3_main_2_hwmod, .clk = "l3_div_ck", @@ -3913,7 +3913,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { }; /* aess -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = { .master = &omap44xx_aess_hwmod, .slave = &omap44xx_l4_abe_hwmod, .clk = "ocp_abe_iclk", @@ -4004,7 +4004,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { }; /* l4_abe -> aess */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -4022,7 +4022,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { }; /* l4_abe -> aess (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -5848,7 +5848,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_fs_addrs[] = { }; /* l4_cfg -> usb_host_fs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_usb_host_fs_hwmod, .clk = "l4_div_ck", @@ -6005,13 +6005,13 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, &omap44xx_l4_cfg__l3_main_2, - &omap44xx_usb_host_fs__l3_main_2, + /* &omap44xx_usb_host_fs__l3_main_2, */ &omap44xx_usb_host_hs__l3_main_2, &omap44xx_usb_otg_hs__l3_main_2, &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - &omap44xx_aess__l4_abe, + /* &omap44xx_aess__l4_abe, */ &omap44xx_dsp__l4_abe, &omap44xx_l3_main_1__l4_abe, &omap44xx_mpu__l4_abe, @@ -6020,8 +6020,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__l4_wkup, &omap44xx_mpu__mpu_private, &omap44xx_l4_cfg__ocp_wp_noc, - &omap44xx_l4_abe__aess, - &omap44xx_l4_abe__aess_dma, + /* &omap44xx_l4_abe__aess, */ + /* &omap44xx_l4_abe__aess_dma, */ &omap44xx_l3_main_2__c2c, &omap44xx_l4_wkup__counter_32k, &omap44xx_l4_cfg__ctrl_module_core, @@ -6127,7 +6127,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__uart2, &omap44xx_l4_per__uart3, &omap44xx_l4_per__uart4, - &omap44xx_l4_cfg__usb_host_fs, + /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, &omap44xx_l4_cfg__usb_otg_hs, &omap44xx_l4_cfg__usb_tll_hs, diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index de6d46451746..d8f6dbf45d16 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -53,7 +53,7 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, omap_table_init = 1; /* Lets now register with OPP library */ - for (i = 0; i < opp_def_size; i++) { + for (i = 0; i < opp_def_size; i++, opp_def++) { struct omap_hwmod *oh; struct device *dev; @@ -86,7 +86,6 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, __func__, opp_def->freq, opp_def->hwmod_name, i, r); } - opp_def++; } return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 78564895e914..ab04d3bba2e7 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -15,12 +15,25 @@ #include "powerdomain.h" +#ifdef CONFIG_CPU_IDLE +extern int __init omap3_idle_init(void); +extern int __init omap4_idle_init(void); +#else +static inline int omap3_idle_init(void) +{ + return 0; +} + +static inline int omap4_idle_init(void) +{ + return 0; +} +#endif + extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); -extern int omap3_idle_init(void); -extern int omap4_idle_init(void); extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); extern int (*omap_pm_suspend)(void); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3a595e899724..9b463c987508 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -581,10 +581,13 @@ static void __init prcm_setup_regs(void) OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ - omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); - omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + if (omap3_has_iva()) { + omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, + OMAP3430_PM_IVAGRPSEL); + } /* Clear any pending 'reset' flags */ omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST); @@ -598,7 +601,9 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - omap3_iva_idle(); + if (omap3_has_iva()) + omap3_iva_idle(); + omap3_d2d_idle(); } diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index fb0a0a6869d1..bb883e463078 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -71,6 +71,22 @@ static struct powerdomain mpu_3xxx_pwrdm = { .voltdm = { .name = "mpu_iva" }, }; +static struct powerdomain mpu_am35x_pwrdm = { + .name = "mpu_pwrdm", + .prcm_offs = MPU_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .flags = PWRDM_HAS_MPU_QUIRK, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, + }, + .voltdm = { .name = "mpu_iva" }, +}; + /* * The USBTLL Save-and-Restore mechanism is broken on * 3430s up to ES3.0 and 3630ES1.0. Hence this feature @@ -120,6 +136,23 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain core_am35x_pwrdm = { + .name = "core_pwrdm", + .prcm_offs = CORE_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEM1RETSTATE */ + [1] = PWRSTS_ON, /* MEM2RETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEM1ONSTATE */ + [1] = PWRSTS_ON, /* MEM2ONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain dss_pwrdm = { .name = "dss_pwrdm", .prcm_offs = OMAP3430_DSS_MOD, @@ -135,6 +168,21 @@ static struct powerdomain dss_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain dss_am35x_pwrdm = { + .name = "dss_pwrdm", + .prcm_offs = OMAP3430_DSS_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + /* * Although the 34XX TRM Rev K Table 4-371 notes that retention is a * possible SGX powerstate, the SGX device itself does not support @@ -156,6 +204,21 @@ static struct powerdomain sgx_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain sgx_am35x_pwrdm = { + .name = "sgx_pwrdm", + .prcm_offs = OMAP3430ES2_SGX_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain cam_pwrdm = { .name = "cam_pwrdm", .prcm_offs = OMAP3430_CAM_MOD, @@ -186,6 +249,21 @@ static struct powerdomain per_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain per_am35x_pwrdm = { + .name = "per_pwrdm", + .prcm_offs = OMAP3430_PER_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain emu_pwrdm = { .name = "emu_pwrdm", .prcm_offs = OMAP3430_EMU_MOD, @@ -200,6 +278,14 @@ static struct powerdomain neon_pwrdm = { .voltdm = { .name = "mpu_iva" }, }; +static struct powerdomain neon_am35x_pwrdm = { + .name = "neon_pwrdm", + .prcm_offs = OMAP3430_NEON_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .voltdm = { .name = "mpu_iva" }, +}; + static struct powerdomain usbhost_pwrdm = { .name = "usbhost_pwrdm", .prcm_offs = OMAP3430ES2_USBHOST_MOD, @@ -293,6 +379,22 @@ static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = { NULL }; +static struct powerdomain *powerdomains_am35x[] __initdata = { + &wkup_omap2_pwrdm, + &mpu_am35x_pwrdm, + &neon_am35x_pwrdm, + &core_am35x_pwrdm, + &sgx_am35x_pwrdm, + &dss_am35x_pwrdm, + &per_am35x_pwrdm, + &emu_pwrdm, + &dpll1_pwrdm, + &dpll3_pwrdm, + &dpll4_pwrdm, + &dpll5_pwrdm, + NULL +}; + void __init omap3xxx_powerdomains_init(void) { unsigned int rev; @@ -301,21 +403,34 @@ void __init omap3xxx_powerdomains_init(void) return; pwrdm_register_platform_funcs(&omap3_pwrdm_operations); - pwrdm_register_pwrdms(powerdomains_omap3430_common); rev = omap_rev(); - if (rev == OMAP3430_REV_ES1_0) - pwrdm_register_pwrdms(powerdomains_omap3430es1); - else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 || - rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0) - pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0); - else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 || - rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1 || - rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) - pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus); - else - WARN(1, "OMAP3 powerdomain init: unknown chip type\n"); + if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { + pwrdm_register_pwrdms(powerdomains_am35x); + } else { + pwrdm_register_pwrdms(powerdomains_omap3430_common); + + switch (rev) { + case OMAP3430_REV_ES1_0: + pwrdm_register_pwrdms(powerdomains_omap3430es1); + break; + case OMAP3430_REV_ES2_0: + case OMAP3430_REV_ES2_1: + case OMAP3430_REV_ES3_0: + case OMAP3630_REV_ES1_0: + pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0); + break; + case OMAP3430_REV_ES3_1: + case OMAP3430_REV_ES3_1_2: + case OMAP3630_REV_ES1_1: + case OMAP3630_REV_ES1_2: + pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus); + break; + default: + WARN(1, "OMAP3 powerdomain init: unknown chip type\n"); + } + } pwrdm_complete_init(); } diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 44485a8f2556..d5ae4e234bbc 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -203,8 +203,8 @@ #define OMAP3430_EN_MMC2_SHIFT 25 #define OMAP3430_EN_MMC1_MASK (1 << 24) #define OMAP3430_EN_MMC1_SHIFT 24 -#define OMAP3430_EN_UART4_MASK (1 << 23) -#define OMAP3430_EN_UART4_SHIFT 23 +#define AM35XX_EN_UART4_MASK (1 << 23) +#define AM35XX_EN_UART4_SHIFT 23 #define OMAP3430_EN_MCSPI4_MASK (1 << 21) #define OMAP3430_EN_MCSPI4_SHIFT 21 #define OMAP3430_EN_MCSPI3_MASK (1 << 20) diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 663ade3b2f45..03b126d9ad94 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -85,7 +85,7 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG]; struct irq_chip *chip = irq_desc_get_chip(desc); unsigned int virtirq; - int nr_irqs = prcm_irq_setup->nr_regs * 32; + int nr_irq = prcm_irq_setup->nr_regs * 32; /* * If we are suspended, mask all interrupts from PRCM level, @@ -110,7 +110,7 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) prcm_irq_setup->read_pending_irqs(pending); /* No bit set, then all IRQs are handled */ - if (find_first_bit(pending, nr_irqs) >= nr_irqs) + if (find_first_bit(pending, nr_irq) >= nr_irq) break; omap_prcm_events_filter_priority(pending, priority_pending); @@ -121,11 +121,11 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) */ /* Serve priority events first */ - for_each_set_bit(virtirq, priority_pending, nr_irqs) + for_each_set_bit(virtirq, priority_pending, nr_irq) generic_handle_irq(prcm_irq_setup->base_irq + virtirq); /* Serve normal events next */ - for_each_set_bit(virtirq, pending, nr_irqs) + for_each_set_bit(virtirq, pending, nr_irq) generic_handle_irq(prcm_irq_setup->base_irq + virtirq); } if (chip->irq_ack) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 119d5a910f3a..3882f3c7608c 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -32,6 +32,7 @@ #include "twl-common.h" #include "pm.h" #include "voltage.h" +#include "mux.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -48,6 +49,7 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { }, }; +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static int twl_set_voltage(void *data, int target_uV) { struct voltagedomain *voltdm = (struct voltagedomain *)data; @@ -59,6 +61,7 @@ static int twl_get_voltage(void *data) struct voltagedomain *voltdm = (struct voltagedomain *)data; return voltdm_get_voltage(voltdm); } +#endif void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, @@ -77,6 +80,7 @@ void __init omap4_pmic_init(const char *pmic_type, struct twl6040_platform_data *twl6040_data, int twl6040_irq) { /* PMIC part*/ + omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(omap4_i2c1_board_info[0].type, pmic_type, sizeof(omap4_i2c1_board_info[0].type)); omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; @@ -211,10 +215,6 @@ static struct twl_regulator_driver_data omap3_vdd2_drvdata = { void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL4030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL4030_IRQ_END; if (!pmic_data->vdd1) { omap3_vdd1.driver_data = &omap3_vdd1_drvdata; omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva"); @@ -479,11 +479,6 @@ static struct regulator_init_data omap4_v2v1_idata = { void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL6030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL6030_IRQ_END; - if (!pmic_data->vdd1) { omap4_vdd1.driver_data = &omap4_vdd1_drvdata; omap4_vdd1_drvdata.data = voltdm_lookup("mpu"); diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile index e5ec4a8d9bcb..8e39f80fce19 100644 --- a/arch/arm/mach-picoxcell/Makefile +++ b/arch/arm/mach-picoxcell/Makefile @@ -1,2 +1 @@ obj-y := common.o -obj-y += time.o diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c index a2e8ae8b5821..8f9a0b47a7fa 100644 --- a/arch/arm/mach-picoxcell/common.c +++ b/arch/arm/mach-picoxcell/common.c @@ -14,6 +14,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/dw_apb_timer.h> #include <asm/mach/arch.h> #include <asm/hardware/vic.h> @@ -97,7 +98,7 @@ DT_MACHINE_START(PICOXCELL, "Picochip picoXcell") .nr_irqs = NR_IRQS_LEGACY, .init_irq = picoxcell_init_irq, .handle_irq = vic_handle_irq, - .timer = &picoxcell_timer, + .timer = &dw_apb_timer, .init_machine = picoxcell_init_machine, .dt_compat = picoxcell_dt_match, .restart = picoxcell_wdt_restart, diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h index 83d55ab956a4..a65cb02f84c8 100644 --- a/arch/arm/mach-picoxcell/common.h +++ b/arch/arm/mach-picoxcell/common.h @@ -12,6 +12,6 @@ #include <asm/mach/time.h> -extern struct sys_timer picoxcell_timer; +extern struct sys_timer dw_apb_timer; #endif /* __PICOXCELL_COMMON_H__ */ diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c deleted file mode 100644 index 2ecba6743b8e..000000000000 --- a/arch/arm/mach-picoxcell/time.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * All enquiries to support@picochip.com - */ -#include <linux/dw_apb_timer.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> -#include <asm/sched_clock.h> - -#include "common.h" - -static void timer_get_base_and_rate(struct device_node *np, - void __iomem **base, u32 *rate) -{ - *base = of_iomap(np, 0); - - if (!*base) - panic("Unable to map regs for %s", np->name); - - if (of_property_read_u32(np, "clock-freq", rate)) - panic("No clock-freq property for %s", np->name); -} - -static void picoxcell_add_clockevent(struct device_node *event_timer) -{ - void __iomem *iobase; - struct dw_apb_clock_event_device *ced; - u32 irq, rate; - - irq = irq_of_parse_and_map(event_timer, 0); - if (irq == NO_IRQ) - panic("No IRQ for clock event timer"); - - timer_get_base_and_rate(event_timer, &iobase, &rate); - - ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq, - rate); - if (!ced) - panic("Unable to initialise clockevent device"); - - dw_apb_clockevent_register(ced); -} - -static void picoxcell_add_clocksource(struct device_node *source_timer) -{ - void __iomem *iobase; - struct dw_apb_clocksource *cs; - u32 rate; - - timer_get_base_and_rate(source_timer, &iobase, &rate); - - cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate); - if (!cs) - panic("Unable to initialise clocksource device"); - - dw_apb_clocksource_start(cs); - dw_apb_clocksource_register(cs); -} - -static void __iomem *sched_io_base; - -static u32 picoxcell_read_sched_clock(void) -{ - return __raw_readl(sched_io_base); -} - -static const struct of_device_id picoxcell_rtc_ids[] __initconst = { - { .compatible = "picochip,pc3x2-rtc" }, - { /* Sentinel */ }, -}; - -static void picoxcell_init_sched_clock(void) -{ - struct device_node *sched_timer; - u32 rate; - - sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids); - if (!sched_timer) - panic("No RTC for sched clock to use"); - - timer_get_base_and_rate(sched_timer, &sched_io_base, &rate); - of_node_put(sched_timer); - - setup_sched_clock(picoxcell_read_sched_clock, 32, rate); -} - -static const struct of_device_id picoxcell_timer_ids[] __initconst = { - { .compatible = "picochip,pc3x2-timer" }, - {}, -}; - -static void __init picoxcell_timer_init(void) -{ - struct device_node *event_timer, *source_timer; - - event_timer = of_find_matching_node(NULL, picoxcell_timer_ids); - if (!event_timer) - panic("No timer for clockevent"); - picoxcell_add_clockevent(event_timer); - - source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids); - if (!source_timer) - panic("No timer for clocksource"); - picoxcell_add_clocksource(source_timer); - - of_node_put(source_timer); - - picoxcell_init_sched_clock(); -} - -struct sys_timer picoxcell_timer = { - .init = picoxcell_timer_init, -}; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index d09da6a746b8..d3de84b0dcbe 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -127,7 +127,11 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO19_SSP2_SCLK, GPIO86_SSP2_RXD, GPIO87_SSP2_TXD, - GPIO88_GPIO, + GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */ + + /* BQ24022 Regulator */ + GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */ + GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */ /* HX4700 specific input GPIOs */ GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */ @@ -135,6 +139,10 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO14_GPIO, /* nWLAN_IRQ */ /* HX4700 specific output GPIOs */ + GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */ + GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */ + GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */ GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */ GPIO10_GPIO, /* GSM_IRQ */ @@ -872,14 +880,19 @@ static struct gpio global_gpios[] = { { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" }, { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" }, { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, + { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" }, { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, + { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" }, { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, + { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" }, }; static void __init hx4700_init(void) { int ret; + PCFR = PCFR_GPR_EN | PCFR_OPDE; + pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1); ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c index 8702ecfaab30..14a81c2317a4 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c @@ -144,7 +144,8 @@ static struct clk_lookup s3c2416_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk), + /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */ + CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk), }; void __init s3c2416_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 414364eb426c..cb2883d553b5 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -106,7 +106,7 @@ static struct clk s3c2440_clk_cam_upll = { static struct clk s3c2440_clk_ac97 = { .name = "ac97", .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, + .ctrlbit = S3C2440_CLKCON_AC97, }; static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index a4c5a520d994..7f689ce1be61 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -181,7 +181,7 @@ static struct clk *clks[] __initdata = { static struct clk_lookup s3c2443_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk), + CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), }; void __init s3c2443_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index aeeb2be283fa..aeb4a24ff3ed 100644 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -559,7 +559,7 @@ static struct clk hsmmc1_clk = { static struct clk hsspi_clk = { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s3c2443-spi.0", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_HSSPI, @@ -633,7 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk), + CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk), }; void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 084604be6ad1..87e75a250d5e 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -182,19 +182,21 @@ static struct platform_device __initdata *smdk_devs[] = { &smdk_led7, }; +static const struct gpio smdk_led_gpios[] = { + { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL }, +}; + void __init smdk_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ - s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); - - s3c2410_gpio_setpin(S3C2410_GPF(4), 1); - s3c2410_gpio_setpin(S3C2410_GPF(5), 1); - s3c2410_gpio_setpin(S3C2410_GPF(6), 1); - s3c2410_gpio_setpin(S3C2410_GPF(7), 1); + int ret = gpio_request_array(smdk_led_gpios, + ARRAY_SIZE(smdk_led_gpios)); + if (!WARN_ON(ret < 0)) + gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios)); if (machine_is_smdk2443()) smdk_nand_info.twrph0 = 50; diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 56cdd34cce41..0c9e9a785ef6 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -41,7 +41,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> #include <mach/regs-gpio.h> #include <plat/regs-serial.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h deleted file mode 100644 index 4c38b39b741d..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - * - * Machine BAST - Power Management chip - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTPMU_H -#define __ASM_ARCH_BASTPMU_H "08_OCT_2004" - -#define BASTPMU_REG_IDENT (0x00) -#define BASTPMU_REG_VERSION (0x01) -#define BASTPMU_REG_DDCCTRL (0x02) -#define BASTPMU_REG_POWER (0x03) -#define BASTPMU_REG_RESET (0x04) -#define BASTPMU_REG_GWO (0x05) -#define BASTPMU_REG_WOL (0x06) -#define BASTPMU_REG_WOR (0x07) -#define BASTPMU_REG_UID (0x09) - -#define BASTPMU_EEPROM (0xC0) - -#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0) -#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8) -#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9) - -#define BASTPMU_IDENT_0 0x53 -#define BASTPMU_IDENT_1 0x42 -#define BASTPMU_IDENT_2 0x50 -#define BASTPMU_IDENT_3 0x4d - -#define BASTPMU_RESET_GUARD (0x55) - -#endif /* __ASM_ARCH_BASTPMU_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h index 019ea86057f6..3890a05948fb 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h @@ -93,26 +93,5 @@ enum s3c_gpio_number { #define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) #define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) -/* compatibility until drivers can be modified */ - -#define S3C2410_GPA0 S3C2410_GPA(0) -#define S3C2410_GPA1 S3C2410_GPA(1) -#define S3C2410_GPA3 S3C2410_GPA(3) -#define S3C2410_GPA7 S3C2410_GPA(7) - -#define S3C2410_GPE0 S3C2410_GPE(0) -#define S3C2410_GPE1 S3C2410_GPE(1) -#define S3C2410_GPE2 S3C2410_GPE(2) -#define S3C2410_GPE3 S3C2410_GPE(3) -#define S3C2410_GPE4 S3C2410_GPE(4) -#define S3C2410_GPE5 S3C2410_GPE(5) -#define S3C2410_GPE6 S3C2410_GPE(6) -#define S3C2410_GPE7 S3C2410_GPE(7) -#define S3C2410_GPE8 S3C2410_GPE(8) -#define S3C2410_GPE9 S3C2410_GPE(9) -#define S3C2410_GPE10 S3C2410_GPE(10) - -#define S3C2410_GPH10 S3C2410_GPH(10) - #endif /* __MACH_GPIONRS_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h index 3a56a229cac6..217393482153 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gta02.h +++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h @@ -3,82 +3,13 @@ #include <mach/regs-gpio.h> -/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ -#define GTA02v1_SYSTEM_REV 0x00000310 -#define GTA02v2_SYSTEM_REV 0x00000320 -#define GTA02v3_SYSTEM_REV 0x00000330 -#define GTA02v4_SYSTEM_REV 0x00000340 -#define GTA02v5_SYSTEM_REV 0x00000350 -/* since A7 is basically same as A6, we use A6 PCB ID */ -#define GTA02v6_SYSTEM_REV 0x00000360 - -#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */ - -#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0) -#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1) #define GTA02_GPIO_AUX_LED S3C2410_GPB(2) -#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3) -#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5) -#define GTA02_GPIO_BT_EN S3C2410_GPB(6) -#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7) -#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8) #define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9) - -#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */ - -#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */ -#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */ -#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */ - -#define GTA02_GPIO_nG1_INT S3C2410_GPF(0) -#define GTA02_GPIO_IO1 S3C2410_GPF(1) -#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4) -#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */ #define GTA02_GPIO_AUX_KEY S3C2410_GPF(6) #define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7) - -#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4) -#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */ -#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */ - #define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */ -#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2) #define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4) -#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5) -#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */ -#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7) -#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8) -#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8) -#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10) -#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */ -#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0 -#define GTA02_IRQ_MODEM IRQ_EINT1 -#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */ -#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4 -#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5 -#define GTA02_IRQ_AUX IRQ_EINT6 -#define GTA02_IRQ_nHOLD IRQ_EINT7 #define GTA02_IRQ_PCF50633 IRQ_EINT9 -#define GTA02_IRQ_3D IRQ_EINT12 -#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */ -#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */ - -/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */ -#define GTA02_PCB_ID1_0 S3C2410_GPC(13) -#define GTA02_PCB_ID1_1 S3C2410_GPC(15) -#define GTA02_PCB_ID1_2 S3C2410_GPD(0) -#define GTA02_PCB_ID2_0 S3C2410_GPD(3) -#define GTA02_PCB_ID2_1 S3C2410_GPD(4) - -int gta02_get_pcb_revision(void); #endif /* _GTA02_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index cac1ad6b582c..a11a638bd599 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -302,7 +302,7 @@ /* S3C2410: * Port G consists of 8 GPIO/IRQ/Special function * - * GPGCON has 2 bits for each of the input pins on port F + * GPGCON has 2 bits for each of the input pins on port G * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -366,7 +366,7 @@ /* Port H consists of11 GPIO/serial/Misc pins * - * GPGCON has 2 bits for each of the input pins on port F + * GPHCON has 2 bits for each of the input pins on port H * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -427,6 +427,19 @@ * for the 2412/2413 from the 2410/2440/2442 */ +/* + * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits + * for each of the pins on port J. + * 00 - input, 01 output, 10 - camera + * + * Pull up works like all other ports. + */ + +#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) +#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) +#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) +#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) + /* S3C2443 and above */ #define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) #define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h deleted file mode 100644 index 19575e061114..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h +++ /dev/null @@ -1,70 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 GPIO J register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIOJ_H -#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" - -/* Port J consists of 13 GPIO/Camera pins - * - * GPJCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 Camera - * - * pull up works like all other ports. -*/ - -#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) -#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) -#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) -#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) - -#define S3C2440_GPJ0_OUTP (0x01 << 0) -#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) - -#define S3C2440_GPJ1_OUTP (0x01 << 2) -#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) - -#define S3C2440_GPJ2_OUTP (0x01 << 4) -#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) - -#define S3C2440_GPJ3_OUTP (0x01 << 6) -#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) - -#define S3C2440_GPJ4_OUTP (0x01 << 8) -#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) - -#define S3C2440_GPJ5_OUTP (0x01 << 10) -#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) - -#define S3C2440_GPJ6_OUTP (0x01 << 12) -#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) - -#define S3C2440_GPJ7_OUTP (0x01 << 14) -#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) - -#define S3C2440_GPJ8_OUTP (0x01 << 16) -#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) - -#define S3C2440_GPJ9_OUTP (0x01 << 18) -#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) - -#define S3C2440_GPJ10_OUTP (0x01 << 20) -#define S3C2440_GPJ10_CAMHREF (0x02 << 20) - -#define S3C2440_GPJ11_OUTP (0x01 << 22) -#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) - -#define S3C2440_GPJ12_OUTP (0x01 << 24) -#define S3C2440_GPJ12_CAMRESET (0x02 << 24) - -#endif /* __ASM_ARCH_REGS_GPIOJ_H */ - diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 0f29f64a3eeb..92e1f93a6bca 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -71,7 +71,6 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/fb.h> #include <plat/usb-control.h> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index f092b188ab70..bd6d2525debe 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -634,8 +634,8 @@ static void __init mini2440_init(void) s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); /* Turn the backlight early on */ - WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); - gpio_direction_output(S3C2410_GPG(4), 1); + WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL)); + gpio_free(S3C2410_GPG(4)); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index b868dddcb836..678bbca2b5e5 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -47,7 +47,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/regs-gpio.h> #include <mach/leds-gpio.h> #include <mach/regs-lcd.h> #include <plat/regs-serial.h> @@ -325,8 +324,9 @@ static void __init qt2410_machine_init(void) } s3c24xx_fb_set_platdata(&qt2410_fb_info); - s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB(0), 1); + /* set initial state of the LED GPIO */ + WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL)); + gpio_free(S3C2410_GPB(0)); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index a6762aae4727..7ee73f27f207 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -42,7 +42,6 @@ #include <asm/mach-types.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-lcd.h> #include <mach/h1940.h> #include <mach/fb.h> diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c index 03f706dd6009..949ae05e07c5 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c @@ -77,8 +77,10 @@ static void s3c2410_pm_prepare(void) __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF(2), 1); + if (machine_is_aml_m5900()) { + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPF(2)); + } if (machine_is_rx1950()) { /* According to S3C2442 user's manual, page 7-17, @@ -103,8 +105,10 @@ static void s3c2410_pm_resume(void) tmp &= S3C2410_GSTATUS2_OFFRESET; __raw_writel(tmp, S3C2410_GSTATUS2); - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + if (machine_is_aml_m5900()) { + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL); + gpio_free(S3C2410_GPF(2)); + } } struct syscore_ops s3c2410_pm_syscore_ops = { diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index d04588506ec4..c60f67a75aff 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -26,7 +26,6 @@ #include <asm/irq.h> #include <mach/regs-power.h> -#include <mach/regs-gpioj.h> #include <mach/regs-gpio.h> #include <mach/regs-dsc.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index d4bc7f960bbb..6c5f4031ff0c 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -39,7 +39,6 @@ #include <plat/regs-serial.h> #include <mach/regs-power.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/regs-spi.h> #include <mach/regs-s3c2412.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 6f74118f60c6..b0b60a1154d6 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -36,7 +36,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c index 5712c85f39b1..3d47e023ce94 100644 --- a/arch/arm/mach-s3c24xx/setup-spi.c +++ b/arch/arm/mach-s3c24xx/setup-spi.c @@ -13,20 +13,12 @@ #include <linux/platform_device.h> #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .tx_st_done = 21, - .high_speed = 1, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev) +int s3c64xx_spi0_cfg_gpio(void) { /* enable hsspi bit in misccr */ s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1); diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c index ed2638663675..4e11affce3a8 100644 --- a/arch/arm/mach-s3c24xx/setup-ts.c +++ b/arch/arm/mach-s3c24xx/setup-ts.c @@ -16,7 +16,6 @@ struct platform_device; /* don't need the contents */ #include <mach/hardware.h> -#include <mach/regs-gpio.h> /** * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems @@ -27,8 +26,5 @@ struct platform_device; /* don't need the contents */ */ void s3c24xx_ts_cfg_gpio(struct platform_device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON); - s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); + s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3)); } diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 52f079a691cb..28041e83dc82 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -178,13 +178,13 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_KEYPAD, }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s3c6410-spi.0", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_SPI0, }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s3c6410-spi.1", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_SPI1, @@ -331,7 +331,7 @@ static struct clk init_clocks_off[] = { static struct clk clk_48m_spi0 = { .name = "spi_48m", - .devname = "s3c64xx-spi.0", + .devname = "s3c6410-spi.0", .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, @@ -339,7 +339,7 @@ static struct clk clk_48m_spi0 = { static struct clk clk_48m_spi1 = { .name = "spi_48m", - .devname = "s3c64xx-spi.1", + .devname = "s3c6410-spi.1", .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, @@ -802,7 +802,7 @@ static struct clksrc_clk clk_sclk_mmc2 = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "spi-bus", - .devname = "s3c64xx-spi.0", + .devname = "s3c6410-spi.0", .ctrlbit = S3C_CLKCON_SCLK_SPI0, .enable = s3c64xx_sclk_ctrl, }, @@ -814,7 +814,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "spi-bus", - .devname = "s3c64xx-spi.1", + .devname = "s3c6410-spi.1", .ctrlbit = S3C_CLKCON_SCLK_SPI1, .enable = s3c64xx_sclk_ctrl, }, @@ -858,10 +858,10 @@ static struct clk_lookup s3c64xx_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1), + CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0), + CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1), }; #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index fe1a98cf0e4c..57b1ff4b2d7c 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -21,6 +21,7 @@ */ enum dma_ch { /* DMA0/SDMA0 */ + DMACH_DT_PROP = -1, /* not yet supported, do not use */ DMACH_UART0 = 0, DMACH_UART0_SRC2, DMACH_UART1, diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h deleted file mode 100644 index 9d0c43b4b687..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h - * - * Copyright (C) 2009 Samsung Electronics Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S3C64XX_PLAT_SPI_CLKS_H -#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__ - -#define S3C64XX_SPI_SRCCLK_PCLK 0 -#define S3C64XX_SPI_SRCCLK_SPIBUS 1 -#define S3C64XX_SPI_SRCCLK_48M 2 - -#endif /* __S3C64XX_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index d0c352d861f8..6dd4fae33a82 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -799,7 +799,7 @@ static void __init crag6410_machine_init(void) i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); samsung_keypad_set_platdata(&crag6410_keypad_data); - s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1); + s3c64xx_spi0_set_platdata(NULL, 0, 1); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c index d9592ad7a825..4dc53450d715 100644 --- a/arch/arm/mach-s3c64xx/setup-spi.c +++ b/arch/arm/mach-s3c64xx/setup-spi.c @@ -9,19 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> - #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .tx_st_done = 21, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); @@ -30,13 +21,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .tx_st_done = 21, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index ee1e8e7f5631..000445596ec4 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -227,13 +227,13 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 17), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s5p64x0-spi.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 21), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s5p64x0-spi.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 22), @@ -467,7 +467,7 @@ static struct clksrc_clk clk_sclk_uclk = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "s5p64x0-spi.0", .ctrlbit = (1 << 20), .enable = s5p64x0_sclk_ctrl, }, @@ -479,7 +479,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "s5p64x0-spi.1", .ctrlbit = (1 << 21), .enable = s5p64x0_sclk_ctrl, }, @@ -519,8 +519,8 @@ static struct clk_lookup s5p6440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index dae6a13f43bb..f3e0ef3d27c9 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -236,13 +236,13 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 17), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s5p64x0-spi.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 21), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s5p64x0-spi.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 22), @@ -528,7 +528,7 @@ static struct clksrc_clk clk_sclk_uclk = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "s5p64x0-spi.0", .ctrlbit = (1 << 20), .enable = s5p64x0_sclk_ctrl, }, @@ -540,7 +540,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "s5p64x0-spi.1", .ctrlbit = (1 << 21), .enable = s5p64x0_sclk_ctrl, }, @@ -562,8 +562,8 @@ static struct clk_lookup s5p6450_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index 2ee5dc069b37..9c4ce085f585 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -36,8 +36,6 @@ #include <plat/devs.h> #include <plat/irqs.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 s5p6440_pdma_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h deleted file mode 100644 index 170a20a9643a..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPI_CLKS_H -#define __ASM_ARCH_SPI_CLKS_H __FILE__ - -#define S5P64X0_SPI_SRCCLK_PCLK 0 -#define S5P64X0_SPI_SRCCLK_SCLK 1 - -#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c index e9b841240352..7664356720ca 100644 --- a/arch/arm/mach-s5p64x0/setup-spi.c +++ b/arch/arm/mach-s5p64x0/setup-spi.c @@ -9,21 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/io.h> - #include <plat/gpio-cfg.h> -#include <plat/cpu.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .tx_st_done = 25, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { if (soc_is_s5p6450()) s3c_gpio_cfgall_range(S5P6450_GPC(0), 3, @@ -36,13 +25,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .tx_st_done = 25, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { if (soc_is_s5p6450()) s3c_gpio_cfgall_range(S5P6450_GPC(4), 3, diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index 16eca4ea2010..926219791f0d 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -564,19 +564,19 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 5), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s5pc100-spi.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 6), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s5pc100-spi.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 7), }, { .name = "spi", - .devname = "s3c64xx-spi.2", + .devname = "s5pc100-spi.2", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 8), @@ -702,7 +702,7 @@ static struct clk clk_hsmmc0 = { static struct clk clk_48m_spi0 = { .name = "spi_48m", - .devname = "s3c64xx-spi.0", + .devname = "s5pc100-spi.0", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 7), @@ -710,7 +710,7 @@ static struct clk clk_48m_spi0 = { static struct clk clk_48m_spi1 = { .name = "spi_48m", - .devname = "s3c64xx-spi.1", + .devname = "s5pc100-spi.1", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 8), @@ -718,7 +718,7 @@ static struct clk clk_48m_spi1 = { static struct clk clk_48m_spi2 = { .name = "spi_48m", - .devname = "s3c64xx-spi.2", + .devname = "s5pc100-spi.2", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 9), @@ -1085,7 +1085,7 @@ static struct clksrc_clk clk_sclk_mmc2 = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "s5pc100-spi.0", .ctrlbit = (1 << 4), .enable = s5pc100_sclk0_ctrl, }, @@ -1097,7 +1097,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "s5pc100-spi.1", .ctrlbit = (1 << 5), .enable = s5pc100_sclk0_ctrl, }, @@ -1109,7 +1109,7 @@ static struct clksrc_clk clk_sclk_spi1 = { static struct clksrc_clk clk_sclk_spi2 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.2", + .devname = "s5pc100-spi.2", .ctrlbit = (1 << 6), .enable = s5pc100_sclk0_ctrl, }, @@ -1315,12 +1315,12 @@ static struct clk_lookup s5pc100_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2), - CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk), + CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0), + CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1), + CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk), + CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2), + CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk), }; void __init s5pc100_register_clocks(void) diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index afd8db2d5991..b1418409709e 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -33,8 +33,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h b/arch/arm/mach-s5pc100/include/mach/spi-clocks.h deleted file mode 100644 index 65e426370bb2..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5PC100_PLAT_SPI_CLKS_H -#define __S5PC100_PLAT_SPI_CLKS_H __FILE__ - -#define S5PC100_SPI_SRCCLK_PCLK 0 -#define S5PC100_SPI_SRCCLK_48M 1 -#define S5PC100_SPI_SRCCLK_SPIBUS 2 - -#endif /* __S5PC100_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c index 431a6f747caa..183567961de1 100644 --- a/arch/arm/mach-s5pc100/setup-spi.c +++ b/arch/arm/mach-s5pc100/setup-spi.c @@ -9,20 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> - #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .high_speed = 1, - .tx_st_done = 21, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { s3c_gpio_cfgall_range(S5PC100_GPB(0), 3, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); @@ -31,14 +21,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .high_speed = 1, - .tx_st_done = 21, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { s3c_gpio_cfgall_range(S5PC100_GPB(4), 3, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); @@ -47,14 +30,7 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI2 -struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .high_speed = 1, - .tx_st_done = 21, -}; - -int s3c64xx_spi2_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi2_cfg_gpio(void) { s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3)); s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 09609d50961d..fcdf52dbcc49 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -445,19 +445,19 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 11), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s5pv210-spi.0", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<12), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s5pv210-spi.1", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<13), }, { .name = "spi", - .devname = "s3c64xx-spi.2", + .devname = "s5pv210-spi.2", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<14), @@ -1035,7 +1035,7 @@ static struct clksrc_clk clk_sclk_mmc3 = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "s5pv210-spi.0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 16), }, @@ -1047,7 +1047,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "s5pv210-spi.1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 17), }, @@ -1331,8 +1331,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), }; void __init s5pv210_register_clocks(void) diff --git a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h deleted file mode 100644 index 02acded5f73d..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5PV210_PLAT_SPI_CLKS_H -#define __S5PV210_PLAT_SPI_CLKS_H __FILE__ - -#define S5PV210_SPI_SRCCLK_PCLK 0 -#define S5PV210_SPI_SRCCLK_SCLK 1 - -#endif /* __S5PV210_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c index f43c5048a37d..81aecc162f82 100644 --- a/arch/arm/mach-s5pv210/setup-spi.c +++ b/arch/arm/mach-s5pv210/setup-spi.c @@ -9,20 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> - #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata = { - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .high_speed = 1, - .tx_st_done = 25, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); @@ -33,14 +23,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, - .tx_st_done = 25, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index e859fcdb3d58..fde0d23121dc 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -22,8 +22,13 @@ #include <mach/common.h> #include <mach/emev2.h> +#ifdef CONFIG_ARCH_SH73A0 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \ of_machine_is_compatible("renesas,sh73a0")) +#else +#define is_sh73a0() (0) +#endif + #define is_r8a7779() machine_is_marzen() #ifdef CONFIG_ARCH_EMEV2 diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 0f41bd1c47c3..66db5f13af84 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -87,7 +87,7 @@ void __init spear3xx_map_io(void) static void __init spear3xx_timer_init(void) { - char pclk_name[] = "pll3_48m_clk"; + char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; spear3xx_clk_init(); diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2e2e3596583e..9af67d003c62 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -423,7 +423,7 @@ void __init spear6xx_map_io(void) static void __init spear6xx_timer_init(void) { - char pclk_name[] = "pll3_48m_clk"; + char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; spear6xx_clk_init(); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 6a113a9bb87a..7c407393cd07 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -63,7 +63,6 @@ comment "Tegra board type" config MACH_HARMONY bool "Harmony board" depends on ARCH_TEGRA_2x_SOC - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Harmony development platform @@ -71,7 +70,6 @@ config MACH_KAEN bool "Kaen board" depends on ARCH_TEGRA_2x_SOC select MACH_SEABOARD - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for the Kaen version of Seaboard @@ -84,7 +82,6 @@ config MACH_PAZ00 config MACH_SEABOARD bool "Seaboard board" depends on ARCH_TEGRA_2x_SOC - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Seaboard development platform. It will also be included for some of the derivative boards that diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 2eb4445ddb14..90aae34245cd 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -8,9 +8,10 @@ obj-y += timer.o obj-y += fuse.o obj-y += pmc.o obj-y += flowctrl.o +obj-y += powergate.o +obj-y += apbio.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o @@ -18,7 +19,7 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o apbio.o +obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_USB_SUPPORT) += usb_phy.o diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 9a82094092d7..435f00ca3c58 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -2,9 +2,10 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 -dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb -dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb -dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb -dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb -dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb +dtb-$(CONFIG_MACH_HARMONY) += tegra20-harmony.dtb +dtb-$(CONFIG_MACH_PAZ00) += tegra20-paz00.dtb +dtb-$(CONFIG_MACH_SEABOARD) += tegra20-seaboard.dtb +dtb-$(CONFIG_MACH_TRIMSLICE) += tegra20-trimslice.dtb +dtb-$(CONFIG_MACH_VENTANA) += tegra20-ventana.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c index e75451e517bd..dc0fe389be56 100644 --- a/arch/arm/mach-tegra/apbio.c +++ b/arch/arm/mach-tegra/apbio.c @@ -15,6 +15,9 @@ #include <linux/kernel.h> #include <linux/io.h> +#include <mach/iomap.h> +#include <linux/of.h> +#include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/spinlock.h> #include <linux/completion.h> @@ -22,17 +25,21 @@ #include <linux/mutex.h> #include <mach/dma.h> -#include <mach/iomap.h> #include "apbio.h" +#if defined(CONFIG_TEGRA_SYSTEM_DMA) || defined(CONFIG_TEGRA20_APB_DMA) static DEFINE_MUTEX(tegra_apb_dma_lock); - -static struct tegra_dma_channel *tegra_apb_dma; static u32 *tegra_apb_bb; static dma_addr_t tegra_apb_bb_phys; static DECLARE_COMPLETION(tegra_apb_wait); +static u32 tegra_apb_readl_direct(unsigned long offset); +static void tegra_apb_writel_direct(u32 value, unsigned long offset); + +#if defined(CONFIG_TEGRA_SYSTEM_DMA) +static struct tegra_dma_channel *tegra_apb_dma; + bool tegra_apb_init(void) { struct tegra_dma_channel *ch; @@ -72,13 +79,13 @@ static void apb_dma_complete(struct tegra_dma_req *req) complete(&tegra_apb_wait); } -u32 tegra_apb_readl(unsigned long offset) +static u32 tegra_apb_readl_using_dma(unsigned long offset) { struct tegra_dma_req req; int ret; if (!tegra_apb_dma && !tegra_apb_init()) - return readl(IO_TO_VIRT(offset)); + return tegra_apb_readl_direct(offset); mutex_lock(&tegra_apb_dma_lock); req.complete = apb_dma_complete; @@ -108,13 +115,13 @@ u32 tegra_apb_readl(unsigned long offset) return *((u32 *)tegra_apb_bb); } -void tegra_apb_writel(u32 value, unsigned long offset) +static void tegra_apb_writel_using_dma(u32 value, unsigned long offset) { struct tegra_dma_req req; int ret; if (!tegra_apb_dma && !tegra_apb_init()) { - writel(value, IO_TO_VIRT(offset)); + tegra_apb_writel_direct(value, offset); return; } @@ -143,3 +150,176 @@ void tegra_apb_writel(u32 value, unsigned long offset) mutex_unlock(&tegra_apb_dma_lock); } + +#else +static struct dma_chan *tegra_apb_dma_chan; +static struct dma_slave_config dma_sconfig; + +bool tegra_apb_dma_init(void) +{ + dma_cap_mask_t mask; + + mutex_lock(&tegra_apb_dma_lock); + + /* Check to see if we raced to setup */ + if (tegra_apb_dma_chan) + goto skip_init; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + tegra_apb_dma_chan = dma_request_channel(mask, NULL, NULL); + if (!tegra_apb_dma_chan) { + /* + * This is common until the device is probed, so don't + * shout about it. + */ + pr_debug("%s: can not allocate dma channel\n", __func__); + goto err_dma_alloc; + } + + tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32), + &tegra_apb_bb_phys, GFP_KERNEL); + if (!tegra_apb_bb) { + pr_err("%s: can not allocate bounce buffer\n", __func__); + goto err_buff_alloc; + } + + dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + dma_sconfig.slave_id = TEGRA_DMA_REQ_SEL_CNTR; + dma_sconfig.src_maxburst = 1; + dma_sconfig.dst_maxburst = 1; + +skip_init: + mutex_unlock(&tegra_apb_dma_lock); + return true; + +err_buff_alloc: + dma_release_channel(tegra_apb_dma_chan); + tegra_apb_dma_chan = NULL; + +err_dma_alloc: + mutex_unlock(&tegra_apb_dma_lock); + return false; +} + +static void apb_dma_complete(void *args) +{ + complete(&tegra_apb_wait); +} + +static int do_dma_transfer(unsigned long apb_add, + enum dma_transfer_direction dir) +{ + struct dma_async_tx_descriptor *dma_desc; + int ret; + + if (dir == DMA_DEV_TO_MEM) + dma_sconfig.src_addr = apb_add; + else + dma_sconfig.dst_addr = apb_add; + + ret = dmaengine_slave_config(tegra_apb_dma_chan, &dma_sconfig); + if (ret) + return ret; + + dma_desc = dmaengine_prep_slave_single(tegra_apb_dma_chan, + tegra_apb_bb_phys, sizeof(u32), dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!dma_desc) + return -EINVAL; + + dma_desc->callback = apb_dma_complete; + dma_desc->callback_param = NULL; + + INIT_COMPLETION(tegra_apb_wait); + + dmaengine_submit(dma_desc); + dma_async_issue_pending(tegra_apb_dma_chan); + ret = wait_for_completion_timeout(&tegra_apb_wait, + msecs_to_jiffies(50)); + + if (WARN(ret == 0, "apb read dma timed out")) { + dmaengine_terminate_all(tegra_apb_dma_chan); + return -EFAULT; + } + return 0; +} + +static u32 tegra_apb_readl_using_dma(unsigned long offset) +{ + int ret; + + if (!tegra_apb_dma_chan && !tegra_apb_dma_init()) + return tegra_apb_readl_direct(offset); + + mutex_lock(&tegra_apb_dma_lock); + ret = do_dma_transfer(offset, DMA_DEV_TO_MEM); + if (ret < 0) { + pr_err("error in reading offset 0x%08lx using dma\n", offset); + *(u32 *)tegra_apb_bb = 0; + } + mutex_unlock(&tegra_apb_dma_lock); + return *((u32 *)tegra_apb_bb); +} + +static void tegra_apb_writel_using_dma(u32 value, unsigned long offset) +{ + int ret; + + if (!tegra_apb_dma_chan && !tegra_apb_dma_init()) { + tegra_apb_writel_direct(value, offset); + return; + } + + mutex_lock(&tegra_apb_dma_lock); + *((u32 *)tegra_apb_bb) = value; + ret = do_dma_transfer(offset, DMA_MEM_TO_DEV); + if (ret < 0) + pr_err("error in writing offset 0x%08lx using dma\n", offset); + mutex_unlock(&tegra_apb_dma_lock); +} +#endif +#else +#define tegra_apb_readl_using_dma tegra_apb_readl_direct +#define tegra_apb_writel_using_dma tegra_apb_writel_direct +#endif + +typedef u32 (*apbio_read_fptr)(unsigned long offset); +typedef void (*apbio_write_fptr)(u32 value, unsigned long offset); + +static apbio_read_fptr apbio_read; +static apbio_write_fptr apbio_write; + +static u32 tegra_apb_readl_direct(unsigned long offset) +{ + return readl(IO_TO_VIRT(offset)); +} + +static void tegra_apb_writel_direct(u32 value, unsigned long offset) +{ + writel(value, IO_TO_VIRT(offset)); +} + +void tegra_apb_io_init(void) +{ + /* Need to use dma only when it is Tegra20 based platform */ + if (of_machine_is_compatible("nvidia,tegra20") || + !of_have_populated_dt()) { + apbio_read = tegra_apb_readl_using_dma; + apbio_write = tegra_apb_writel_using_dma; + } else { + apbio_read = tegra_apb_readl_direct; + apbio_write = tegra_apb_writel_direct; + } +} + +u32 tegra_apb_readl(unsigned long offset) +{ + return apbio_read(offset); +} + +void tegra_apb_writel(u32 value, unsigned long offset) +{ + apbio_write(value, offset); +} diff --git a/arch/arm/mach-tegra/apbio.h b/arch/arm/mach-tegra/apbio.h index 8b49e8c89a64..f05d71c303c7 100644 --- a/arch/arm/mach-tegra/apbio.h +++ b/arch/arm/mach-tegra/apbio.h @@ -16,24 +16,7 @@ #ifndef __MACH_TEGRA_APBIO_H #define __MACH_TEGRA_APBIO_H -#ifdef CONFIG_TEGRA_SYSTEM_DMA - +void tegra_apb_io_init(void); u32 tegra_apb_readl(unsigned long offset); void tegra_apb_writel(u32 value, unsigned long offset); - -#else -#include <asm/io.h> -#include <mach/io.h> - -static inline u32 tegra_apb_readl(unsigned long offset) -{ - return readl(IO_TO_VIRT(offset)); -} - -static inline void tegra_apb_writel(u32 value, unsigned long offset) -{ - writel(value, IO_TO_VIRT(offset)); -} -#endif - #endif diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 204a5c8b0b57..96fef6bcc651 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -33,6 +33,7 @@ #include "clock.h" #include "fuse.h" #include "pmc.h" +#include "apbio.h" /* * Storage for debug-macro.S's state. @@ -127,6 +128,7 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) #ifdef CONFIG_ARCH_TEGRA_2x_SOC void __init tegra20_init_early(void) { + tegra_apb_io_init(); tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); @@ -138,6 +140,7 @@ void __init tegra20_init_early(void) #ifdef CONFIG_ARCH_TEGRA_3x_SOC void __init tegra30_init_early(void) { + tegra_apb_io_init(); tegra_init_fuse(); tegra30_init_clocks(); tegra_clk_init_from_table(tegra30_clk_init_table); diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index d83a8c0296f5..566e2f88899b 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -27,9 +27,9 @@ #include <linux/cpuidle.h> #include <linux/hrtimer.h> -#include <mach/iomap.h> +#include <asm/proc-fns.h> -extern void tegra_cpu_wfi(void); +#include <mach/iomap.h> static int tegra_idle_enter_lp3(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); @@ -64,7 +64,7 @@ static int tegra_idle_enter_lp3(struct cpuidle_device *dev, enter = ktime_get(); - tegra_cpu_wfi(); + cpu_do_idle(); exit = ktime_sub(ktime_get(), enter); us = ktime_to_us(exit); diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 5b20197bae7f..d29b156a8011 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -62,32 +62,3 @@ movw \reg, #:lower16:\val movt \reg, #:upper16:\val .endm - -/* - * tegra_cpu_wfi - * - * puts current CPU in clock-gated wfi using the flow controller - * - * corrupts r0-r3 - * must be called with MMU on - */ - -ENTRY(tegra_cpu_wfi) - cpu_id r0 - cpu_to_halt_reg r1, r0 - cpu_to_csr_reg r2, r0 - mov32 r0, TEGRA_FLOW_CTRL_VIRT - mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - str r3, [r0, r2] @ clear event & interrupt status - mov r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME - str r3, [r0, r1] @ put flow controller in wait irq mode - dsb - wfi - mov r3, #0 - str r3, [r0, r1] @ clear flow controller halt status - mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - str r3, [r0, r2] @ clear event & interrupt status - dsb - mov pc, lr -ENDPROC(tegra_cpu_wfi) - diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 53d3d46dec12..c013bbf79cac 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,6 +41,7 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 + select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 920251cf834c..18ff781cfbe4 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -80,7 +80,7 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi0_data = { +struct mmci_platform_data mop500_sdi0_data = { .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, @@ -227,7 +227,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi4_data = { +struct mmci_platform_data mop500_sdi4_data = { .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 1509a3cb5833..84461fa2a3ba 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -58,7 +58,7 @@ static struct gpio_led snowball_led_array[] = { { .name = "user_led", - .default_trigger = "none", + .default_trigger = "heartbeat", .gpio = 142, }, }; @@ -331,43 +331,12 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = { }, }; -#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \ -static struct nmk_i2c_controller u8500_i2c##id##_data = { \ - /* \ - * slave data setup time, which is \ - * 250 ns,100ns,10ns which is 14,6,2 \ - * respectively for a 48 Mhz \ - * i2c clock \ - */ \ - .slsu = _slsu, \ - /* Tx FIFO threshold */ \ - .tft = _tft, \ - /* Rx FIFO threshold */ \ - .rft = _rft, \ - /* std. mode operation */ \ - .clk_freq = clk, \ - /* Slave response timeout(ms) */\ - .timeout = t_out, \ - .sm = _sm, \ -} - -/* - * The board uses 4 i2c controllers, initialize all of - * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 8 and standard - * mode of operation - */ -U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); - static void __init mop500_i2c_init(struct device *parent) { - db8500_add_i2c0(parent, &u8500_i2c0_data); - db8500_add_i2c1(parent, &u8500_i2c1_data); - db8500_add_i2c2(parent, &u8500_i2c2_data); - db8500_add_i2c3(parent, &u8500_i2c3_data); + db8500_add_i2c0(parent, NULL); + db8500_add_i2c1(parent, NULL); + db8500_add_i2c2(parent, NULL); + db8500_add_i2c3(parent, NULL); } static struct gpio_keys_button mop500_gpio_keys[] = { @@ -625,11 +594,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &ab8500_device, }; -static struct platform_device *snowball_of_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, -}; - static void __init mop500_init_machine(void) { struct device *parent = NULL; @@ -769,6 +733,11 @@ MACHINE_END #ifdef CONFIG_MACH_UX500_DT +static struct platform_device *snowball_of_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, +}; + struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires DMA and call-back bindings. */ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), @@ -776,6 +745,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), /* Requires DMA bindings. */ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), /* Requires clock name bindings. */ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), @@ -786,6 +757,13 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), + /* Requires device name bindings. */ + OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), {}, }; @@ -818,8 +796,6 @@ static void __init u8500_init_machine(void) for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; - for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) - snowball_platform_devs[i]->dev.parent = parent; /* automatically probe child nodes of db8500 device */ of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); @@ -838,18 +814,6 @@ static void __init u8500_init_machine(void) mop500_uib_init(); - } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - /* - * Devices to be DT:ed: - * snowball_led_dev = todo - * snowball_key_dev = todo - * snowball_sbnet_dev = done - * ab8500_device = done - */ - platform_add_devices(snowball_of_platform_devs, - ARRAY_SIZE(snowball_of_platform_devs)); - - snowball_sdi_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -871,7 +835,6 @@ static void __init u8500_init_machine(void) mop500_uib_init(); } - mop500_i2c_init(parent); /* This board has full regulator constraints */ regulator_has_full_constraints(); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 2f87b25a908a..b5bfc1a78b1a 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -9,6 +9,7 @@ /* For NOMADIK_NR_GPIO */ #include <mach/irqs.h> +#include <linux/amba/mmci.h> /* Snowball specific GPIO assignments, this board has no GPIO expander */ #define SNOWBALL_ACCEL_INT1_GPIO 163 @@ -78,6 +79,8 @@ struct device; struct i2c_board_info; +extern struct mmci_platform_data mop500_sdi0_data; +extern struct mmci_platform_data mop500_sdi4_data; extern void mop500_sdi_init(struct device *parent); extern void snowball_sdi_init(struct device *parent); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 33275eb4c689..c8dd94f606dc 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -139,7 +139,6 @@ static struct platform_device *platform_devs[] __initdata = { static struct platform_device *of_platform_devs[] __initdata = { &u8500_dma40_device, - &db8500_pmu_device, }; static resource_size_t __initdata db8500_gpio_base[] = { @@ -237,7 +236,6 @@ struct device * __init u8500_of_init_devices(void) parent = db8500_soc_device_init(); - db8500_add_rtc(parent); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); platform_device_register_data(parent, @@ -249,7 +247,7 @@ struct device * __init u8500_of_init_devices(void) /* * Devices to be DT:ed: * u8500_dma40_device = todo - * db8500_pmu_device = todo + * db8500_pmu_device = done * db8500_prcmu_device = done */ platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs)); diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 741e71feca78..66e7f00884ab 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -63,8 +63,10 @@ static void __init ux500_timer_init(void) /* TODO: Once MTU has been DT:ed place code above into else. */ if (of_have_populated_dt()) { +#ifdef CONFIG_OF np = of_find_matching_node(NULL, prcmu_timer_of_match); if (!np) +#endif goto dt_fail; tmp_base = of_iomap(np, 0); diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index bec933b04ef0..e95bf84cc837 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -339,7 +339,6 @@ void __init pci_versatile_preinit(void) static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; - int devslot = PCI_SLOT(dev->devfn); /* slot, pin, irq * 24 1 27 diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index cf8730d35e70..fc3730f01650 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -2,7 +2,8 @@ menu "Versatile Express platform type" depends on ARCH_VEXPRESS config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA - bool + bool "Enable A5 and A9 only errata work-arounds" + default y select ARM_ERRATA_720789 select ARM_ERRATA_751472 select PL310_ERRATA_753970 if CACHE_PL310 @@ -14,7 +15,6 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" - select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA select ARM_GIC select CPU_V7 select HAVE_SMP @@ -22,7 +22,6 @@ config ARCH_VEXPRESS_CA9X4 config ARCH_VEXPRESS_DT bool "Device Tree support for Versatile Express platforms" - select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA select ARM_GIC select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot index 909f85ebf5f4..318d308dfb93 100644 --- a/arch/arm/mach-vexpress/Makefile.boot +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -6,4 +6,5 @@ initrd_phys-y := 0x60800000 dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ - vexpress-v2p-ca15-tc1.dtb + vexpress-v2p-ca15-tc1.dtb \ + vexpress-v2p-ca15_a7.dtb diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index c65cc3b462a5..61c492403b05 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -66,8 +66,15 @@ static void __init ct_ca9x4_init_irq(void) static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) { - v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); - v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2); + u32 site = v2m_get_master_site(); + + /* + * Old firmware was using the "site" component of the command + * to control the DVI muxer (while it should be always 0 ie. MB). + * Newer firmware uses the data register. Keep both for compatibility. + */ + v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site); + v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2); } static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) @@ -105,43 +112,11 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { }; -static long ct_round(struct clk *clk, unsigned long rate) -{ - return rate; -} - -static int ct_set(struct clk *clk, unsigned long rate) -{ - return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate); -} - -static const struct clk_ops osc1_clk_ops = { - .round = ct_round, - .set = ct_set, -}; - -static struct clk osc1_clk = { - .ops = &osc1_clk_ops, - .rate = 24000000, -}; - -static struct clk ct_sp804_clk = { - .rate = 1000000, -}; - -static struct clk_lookup lookups[] = { - { /* CLCD */ - .dev_id = "ct:clcd", - .clk = &osc1_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "ct-timer0", - .clk = &ct_sp804_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "ct-timer1", - .clk = &ct_sp804_clk, - }, +static struct v2m_osc ct_osc1 = { + .osc = 1, + .rate_min = 10000000, + .rate_max = 80000000, + .rate_default = 23750000, }; static struct resource pmu_resources[] = { @@ -174,14 +149,10 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; -static void __init ct_ca9x4_init_early(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} - static void __init ct_ca9x4_init(void) { int i; + struct clk *clk; #ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); @@ -193,6 +164,10 @@ static void __init ct_ca9x4_init(void) l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif + ct_osc1.site = v2m_get_master_site(); + clk = v2m_osc_register("ct:osc1", &ct_osc1); + clk_register_clkdev(clk, NULL, "ct:clcd"); + for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); @@ -234,7 +209,6 @@ struct ct_desc ct_ca9x4_desc __initdata = { .id = V2M_CT_ID_CA9, .name = "CA9x4", .map_io = ct_ca9x4_map_io, - .init_early = ct_ca9x4_init_early, .init_irq = ct_ca9x4_init_irq, .init_tile = ct_ca9x4_init, #ifdef CONFIG_SMP diff --git a/arch/arm/mach-vexpress/include/mach/clkdev.h b/arch/arm/mach-vexpress/include/mach/clkdev.h deleted file mode 100644 index 3f8307d73cad..000000000000 --- a/arch/arm/mach-vexpress/include/mach/clkdev.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#include <plat/clock.h> - -struct clk { - const struct clk_ops *ops; - unsigned long rate; - const struct icst_params *params; -}; - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index fa8224794e0b..9f509f55d078 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -18,6 +18,8 @@ #define DEBUG_LL_VIRT_BASE 0xf8000000 +#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT) + .macro addruart,rp,rv,tmp @ Make an educated guess regarding the memory map: @@ -41,3 +43,42 @@ .endm #include <asm/hardware/debug-pl01x.S> + +#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9) + + .macro addruart,rp,rv,tmp + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #DEBUG_LL_VIRT_BASE + orr \rp, \rp, #DEBUG_LL_PHYS_BASE + .endm + +#include <asm/hardware/debug-pl01x.S> + +#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1) + + .macro addruart,rp,rv,tmp + mov \rp, #DEBUG_LL_UART_OFFSET_RS1 + orr \rv, \rp, #DEBUG_LL_VIRT_BASE + orr \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1 + .endm + +#include <asm/hardware/debug-pl01x.S> + +#else /* CONFIG_DEBUG_LL_UART_NONE */ + + .macro addruart, rp, rv, tmp + /* Safe dummy values */ + mov \rp, #0 + mov \rv, #DEBUG_LL_VIRT_BASE + .endm + + .macro senduart,rd,rx + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx + .endm + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h index 31a92890893d..1e388c7bf4d7 100644 --- a/arch/arm/mach-vexpress/include/mach/motherboard.h +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -1,6 +1,8 @@ #ifndef __MACH_MOTHERBOARD_H #define __MACH_MOTHERBOARD_H +#include <linux/clk-provider.h> + /* * Physical addresses, offset from V2M_PA_CS0-3 */ @@ -104,9 +106,10 @@ #define SYS_CFG_REBOOT (9 << 20) #define SYS_CFG_DVIMODE (11 << 20) #define SYS_CFG_POWER (12 << 20) -#define SYS_CFG_SITE_MB (0 << 16) -#define SYS_CFG_SITE_DB1 (1 << 16) -#define SYS_CFG_SITE_DB2 (2 << 16) +#define SYS_CFG_SITE(n) ((n) << 16) +#define SYS_CFG_SITE_MB 0 +#define SYS_CFG_SITE_DB1 1 +#define SYS_CFG_SITE_DB2 2 #define SYS_CFG_STACK(n) ((n) << 12) #define SYS_CFG_ERR (1 << 1) @@ -122,6 +125,8 @@ void v2m_flags_set(u32 data); #define SYS_MISC_MASTERSITE (1 << 14) #define SYS_PROCIDx_HBI_MASK 0xfff +int v2m_get_master_site(void); + /* * Core tile IDs */ @@ -144,4 +149,21 @@ struct ct_desc { extern struct ct_desc *ct_desc; +/* + * OSC clock provider + */ +struct v2m_osc { + struct clk_hw hw; + u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */ + u8 stack; /* board stack position */ + u16 osc; + unsigned long rate_min; + unsigned long rate_max; + unsigned long rate_default; +}; + +#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw) + +struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc); + #endif diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h index 7dab5596b868..1e472eb0bbdc 100644 --- a/arch/arm/mach-vexpress/include/mach/uncompress.h +++ b/arch/arm/mach-vexpress/include/mach/uncompress.h @@ -27,6 +27,7 @@ static unsigned long get_uart_base(void) { +#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT) unsigned long mpcore_periph; /* @@ -42,6 +43,13 @@ static unsigned long get_uart_base(void) return UART_BASE; else return UART_BASE_RS1; +#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9) + return UART_BASE; +#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1) + return UART_BASE_RS1; +#else + return 0; +#endif } /* @@ -51,6 +59,9 @@ static inline void putc(int c) { unsigned long base = get_uart_base(); + if (!base) + return; + while (AMBA_UART_FR(base) & (1 << 5)) barrier(); @@ -61,6 +72,9 @@ static inline void flush(void) { unsigned long base = get_uart_base(); + if (!base) + return; + while (AMBA_UART_FR(base) & (1 << 3)) barrier(); } diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index fde26adaef32..37608f22ee31 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -16,7 +16,10 @@ #include <linux/spinlock.h> #include <linux/usb/isp1760.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/arch_timer.h> #include <asm/mach-types.h> @@ -81,16 +84,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0"); } -static void __init v2m_timer_init(void) -{ - v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); - v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); -} - -static struct sys_timer v2m_timer = { - .init = v2m_timer_init, -}; - static DEFINE_SPINLOCK(v2m_cfg_lock); @@ -147,6 +140,13 @@ void __init v2m_flags_set(u32 data) writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET); } +int v2m_get_master_site(void) +{ + u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); + + return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1; +} + static struct resource v2m_pcie_i2c_resource = { .start = V2M_SERIAL_BUS_PCI, @@ -201,6 +201,11 @@ static struct platform_device v2m_eth_device = { .dev.platform_data = &v2m_eth_config, }; +static struct regulator_consumer_supply v2m_eth_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource v2m_usb_resources[] = { { .start = V2M_ISP1761, @@ -319,98 +324,145 @@ static struct amba_device *v2m_amba_devs[] __initdata = { }; -static long v2m_osc_round(struct clk *clk, unsigned long rate) +static unsigned long v2m_osc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct v2m_osc *osc = to_v2m_osc(hw); + + return !parent_rate ? osc->rate_default : parent_rate; +} + +static long v2m_osc_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) { + struct v2m_osc *osc = to_v2m_osc(hw); + + if (WARN_ON(rate < osc->rate_min)) + rate = osc->rate_min; + + if (WARN_ON(rate > osc->rate_max)) + rate = osc->rate_max; + return rate; } -static int v2m_osc1_set(struct clk *clk, unsigned long rate) +static int v2m_osc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) { - return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate); + struct v2m_osc *osc = to_v2m_osc(hw); + + v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(osc->site) | + SYS_CFG_STACK(osc->stack) | osc->osc, rate); + + return 0; } -static const struct clk_ops osc1_clk_ops = { - .round = v2m_osc_round, - .set = v2m_osc1_set, -}; - -static struct clk osc1_clk = { - .ops = &osc1_clk_ops, - .rate = 24000000, -}; - -static struct clk osc2_clk = { - .rate = 24000000, -}; - -static struct clk v2m_sp804_clk = { - .rate = 1000000, -}; - -static struct clk v2m_ref_clk = { - .rate = 32768, -}; - -static struct clk dummy_apb_pclk; - -static struct clk_lookup v2m_lookups[] = { - { /* AMBA bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { /* UART0 */ - .dev_id = "mb:uart0", - .clk = &osc2_clk, - }, { /* UART1 */ - .dev_id = "mb:uart1", - .clk = &osc2_clk, - }, { /* UART2 */ - .dev_id = "mb:uart2", - .clk = &osc2_clk, - }, { /* UART3 */ - .dev_id = "mb:uart3", - .clk = &osc2_clk, - }, { /* KMI0 */ - .dev_id = "mb:kmi0", - .clk = &osc2_clk, - }, { /* KMI1 */ - .dev_id = "mb:kmi1", - .clk = &osc2_clk, - }, { /* MMC0 */ - .dev_id = "mb:mmci", - .clk = &osc2_clk, - }, { /* CLCD */ - .dev_id = "mb:clcd", - .clk = &osc1_clk, - }, { /* SP805 WDT */ - .dev_id = "mb:wdt", - .clk = &v2m_ref_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "v2m-timer0", - .clk = &v2m_sp804_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "v2m-timer1", - .clk = &v2m_sp804_clk, - }, +static struct clk_ops v2m_osc_ops = { + .recalc_rate = v2m_osc_recalc_rate, + .round_rate = v2m_osc_round_rate, + .set_rate = v2m_osc_set_rate, +}; + +struct clk * __init v2m_osc_register(const char *name, struct v2m_osc *osc) +{ + struct clk_init_data init; + + WARN_ON(osc->site > 2); + WARN_ON(osc->stack > 15); + WARN_ON(osc->osc > 4095); + + init.name = name; + init.ops = &v2m_osc_ops; + init.flags = CLK_IS_ROOT; + init.num_parents = 0; + + osc->hw.init = &init; + + return clk_register(NULL, &osc->hw); +} + +static struct v2m_osc v2m_mb_osc1 = { + .site = SYS_CFG_SITE_MB, + .osc = 1, + .rate_min = 23750000, + .rate_max = 63500000, + .rate_default = 23750000, +}; + +static const char *v2m_ref_clk_periphs[] __initconst = { + "mb:wdt", "1000f000.wdt", "1c0f0000.wdt", /* SP805 WDT */ +}; + +static const char *v2m_osc1_periphs[] __initconst = { + "mb:clcd", "1001f000.clcd", "1c1f0000.clcd", /* PL111 CLCD */ +}; + +static const char *v2m_osc2_periphs[] __initconst = { + "mb:mmci", "10005000.mmci", "1c050000.mmci", /* PL180 MMCI */ + "mb:kmi0", "10006000.kmi", "1c060000.kmi", /* PL050 KMI0 */ + "mb:kmi1", "10007000.kmi", "1c070000.kmi", /* PL050 KMI1 */ + "mb:uart0", "10009000.uart", "1c090000.uart", /* PL011 UART0 */ + "mb:uart1", "1000a000.uart", "1c0a0000.uart", /* PL011 UART1 */ + "mb:uart2", "1000b000.uart", "1c0b0000.uart", /* PL011 UART2 */ + "mb:uart3", "1000c000.uart", "1c0c0000.uart", /* PL011 UART3 */ +}; + +static void __init v2m_clk_init(void) +{ + struct clk *clk; + int i; + + clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL, + CLK_IS_ROOT, 0); + WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL)); + + clk = clk_register_fixed_rate(NULL, "mb:ref_clk", NULL, + CLK_IS_ROOT, 32768); + for (i = 0; i < ARRAY_SIZE(v2m_ref_clk_periphs); i++) + WARN_ON(clk_register_clkdev(clk, NULL, v2m_ref_clk_periphs[i])); + + clk = clk_register_fixed_rate(NULL, "mb:sp804_clk", NULL, + CLK_IS_ROOT, 1000000); + WARN_ON(clk_register_clkdev(clk, "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(clk, "v2m-timer1", "sp804")); + + clk = v2m_osc_register("mb:osc1", &v2m_mb_osc1); + for (i = 0; i < ARRAY_SIZE(v2m_osc1_periphs); i++) + WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc1_periphs[i])); + + clk = clk_register_fixed_rate(NULL, "mb:osc2", NULL, + CLK_IS_ROOT, 24000000); + for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++) + WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i])); +} + +static void __init v2m_timer_init(void) +{ + v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); + v2m_clk_init(); + v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); +} + +static struct sys_timer v2m_timer = { + .init = v2m_timer_init, }; static void __init v2m_init_early(void) { - ct_desc->init_early(); - clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); + if (ct_desc->init_early) + ct_desc->init_early(); versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); } static void v2m_power_off(void) { - if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0)) + if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) printk(KERN_EMERG "Unable to shutdown\n"); } static void v2m_restart(char str, const char *cmd) { - if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0)) + if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) printk(KERN_EMERG "Unable to reboot\n"); } @@ -458,6 +510,9 @@ static void __init v2m_init(void) { int i; + regulator_register_fixed(0, v2m_eth_supplies, + ARRAY_SIZE(v2m_eth_supplies)); + platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); @@ -522,77 +577,6 @@ void __init v2m_dt_map_io(void) #endif } -static struct clk_lookup v2m_dt_lookups[] = { - { /* AMBA bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "v2m-timer0", - .clk = &v2m_sp804_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "v2m-timer1", - .clk = &v2m_sp804_clk, - }, { /* PL180 MMCI */ - .dev_id = "mb:mmci", /* 10005000.mmci */ - .clk = &osc2_clk, - }, { /* PL050 KMI0 */ - .dev_id = "10006000.kmi", - .clk = &osc2_clk, - }, { /* PL050 KMI1 */ - .dev_id = "10007000.kmi", - .clk = &osc2_clk, - }, { /* PL011 UART0 */ - .dev_id = "10009000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART1 */ - .dev_id = "1000a000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART2 */ - .dev_id = "1000b000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART3 */ - .dev_id = "1000c000.uart", - .clk = &osc2_clk, - }, { /* SP805 WDT */ - .dev_id = "1000f000.wdt", - .clk = &v2m_ref_clk, - }, { /* PL111 CLCD */ - .dev_id = "1001f000.clcd", - .clk = &osc1_clk, - }, - /* RS1 memory map */ - { /* PL180 MMCI */ - .dev_id = "mb:mmci", /* 1c050000.mmci */ - .clk = &osc2_clk, - }, { /* PL050 KMI0 */ - .dev_id = "1c060000.kmi", - .clk = &osc2_clk, - }, { /* PL050 KMI1 */ - .dev_id = "1c070000.kmi", - .clk = &osc2_clk, - }, { /* PL011 UART0 */ - .dev_id = "1c090000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART1 */ - .dev_id = "1c0a0000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART2 */ - .dev_id = "1c0b0000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART3 */ - .dev_id = "1c0c0000.uart", - .clk = &osc2_clk, - }, { /* SP805 WDT */ - .dev_id = "1c0f0000.wdt", - .clk = &v2m_ref_clk, - }, { /* PL111 CLCD */ - .dev_id = "1c1f0000.clcd", - .clk = &osc1_clk, - }, -}; - void __init v2m_dt_init_early(void) { struct device_node *node; @@ -605,8 +589,8 @@ void __init v2m_dt_init_early(void) /* Confirm board type against DT property, if available */ if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { - u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); - u32 id = readl(v2m_sysreg_base + (misc & SYS_MISC_MASTERSITE ? + int site = v2m_get_master_site(); + u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ? V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); u32 hbi = id & SYS_PROCIDx_HBI_MASK; @@ -614,8 +598,6 @@ void __init v2m_dt_init_early(void) pr_warning("vexpress: DT HBI (%x) is not matching " "hardware (%x)!\n", dt_hbi, hbi); } - - clkdev_add_table(v2m_dt_lookups, ARRAY_SIZE(v2m_dt_lookups)); } static struct of_device_id vexpress_irq_match[] __initdata = { @@ -637,6 +619,8 @@ static void __init v2m_dt_timer_init(void) node = of_find_compatible_node(NULL, NULL, "arm,sp810"); v2m_sysctl_init(of_iomap(node, 0)); + v2m_clk_init(); + err = of_property_read_string(of_aliases, "arm,v2m_timer", &path); if (WARN_ON(err)) return; diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index 81aedb7c893c..54e69973f39b 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -1,4 +1,4 @@ -obj-y += devices.o gpio.o irq.o timer.o +obj-y += devices.o gpio.o irq.o timer.o restart.o obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c index a464c7584411..f9fbeb2d10e9 100644 --- a/arch/arm/mach-vt8500/bv07.c +++ b/arch/arm/mach-vt8500/bv07.c @@ -23,6 +23,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/restart.h> #include "devices.h" @@ -62,6 +63,7 @@ void __init bv07_init(void) else printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); + wmt_setup_restart(); vt8500_set_resources(); platform_add_devices(devices, ARRAY_SIZE(devices)); vt8500_gpio_init(); @@ -69,6 +71,7 @@ void __init bv07_init(void) MACHINE_START(BV07, "Benign BV07 Mini Netbook") .atag_offset = 0x100, + .restart = wmt_restart, .reserve = vt8500_reserve_mem, .map_io = vt8500_map_io, .init_irq = vt8500_init_irq, diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h new file mode 100644 index 000000000000..89f9b787d2a0 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/restart.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-vt8500/restart.h + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +void wmt_setup_restart(void); +void wmt_restart(char mode, const char *cmd); diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h deleted file mode 100644 index 58fa8010ee61..000000000000 --- a/arch/arm/mach-vt8500/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/system.h - * - */ -#include <asm/io.h> - -/* PM Software Reset request register */ -#define VT8500_PMSR_VIRT 0xf8130060 - -static inline void arch_reset(char mode, const char *cmd) -{ - writel(1, VT8500_PMSR_VIRT); -} diff --git a/arch/arm/mach-vt8500/restart.c b/arch/arm/mach-vt8500/restart.c new file mode 100644 index 000000000000..497e89a5e130 --- /dev/null +++ b/arch/arm/mach-vt8500/restart.c @@ -0,0 +1,54 @@ +/* linux/arch/arm/mach-vt8500/restart.c + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <asm/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#define LEGACY_PMC_BASE 0xD8130000 +#define WMT_PRIZM_PMSR_REG 0x60 + +static void __iomem *pmc_base; + +void wmt_setup_restart(void) +{ + struct device_node *np; + + /* + * Check if Power Mgmt Controller node is present in device tree. If no + * device tree node, use the legacy PMSR value (valid for all current + * SoCs). + */ + np = of_find_compatible_node(NULL, NULL, "wmt,prizm-pmc"); + if (np) { + pmc_base = of_iomap(np, 0); + + if (!pmc_base) + pr_err("%s:of_iomap(pmc) failed\n", __func__); + + of_node_put(np); + } else { + pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000); + if (!pmc_base) { + pr_err("%s:ioremap(rstc) failed\n", __func__); + return; + } + } +} + +void wmt_restart(char mode, const char *cmd) +{ + if (pmc_base) + writel(1, pmc_base + WMT_PRIZM_PMSR_REG); +} diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c index cf910a956080..db19886caf7c 100644 --- a/arch/arm/mach-vt8500/wm8505_7in.c +++ b/arch/arm/mach-vt8500/wm8505_7in.c @@ -23,6 +23,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/restart.h> #include "devices.h" @@ -61,7 +62,7 @@ void __init wm8505_7in_init(void) pm_power_off = &vt8500_power_off; else printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); - + wmt_setup_restart(); wm8505_set_resources(); platform_add_devices(devices, ARRAY_SIZE(devices)); vt8500_gpio_init(); @@ -69,6 +70,7 @@ void __init wm8505_7in_init(void) MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook") .atag_offset = 0x100, + .restart = wmt_restart, .reserve = wm8505_reserve_mem, .map_io = wm8505_map_io, .init_irq = wm8505_init_irq, diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4044abcf6f9d..655878bcc96d 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1091,7 +1091,7 @@ error: while (--i) if (pages[i]) __free_pages(pages[i], 0); - if (array_size < PAGE_SIZE) + if (array_size <= PAGE_SIZE) kfree(pages); else vfree(pages); @@ -1106,7 +1106,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t s for (i = 0; i < count; i++) if (pages[i]) __free_pages(pages[i], 0); - if (array_size < PAGE_SIZE) + if (array_size <= PAGE_SIZE) kfree(pages); else vfree(pages); diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index c471436c7952..2e8a1efdf7b8 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -64,7 +64,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #ifdef CONFIG_ZONE_DMA extern phys_addr_t arm_dma_limit; #else -#define arm_dma_limit ((u32)~0) +#define arm_dma_limit ((phys_addr_t)~0) #endif extern phys_addr_t arm_lowmem_limit; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e5dad60b558b..cf4528d51774 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -791,6 +791,79 @@ void __init iotable_init(struct map_desc *io_desc, int nr) } } +#ifndef CONFIG_ARM_LPAE + +/* + * The Linux PMD is made of two consecutive section entries covering 2MB + * (see definition in include/asm/pgtable-2level.h). However a call to + * create_mapping() may optimize static mappings by using individual + * 1MB section mappings. This leaves the actual PMD potentially half + * initialized if the top or bottom section entry isn't used, leaving it + * open to problems if a subsequent ioremap() or vmalloc() tries to use + * the virtual space left free by that unused section entry. + * + * Let's avoid the issue by inserting dummy vm entries covering the unused + * PMD halves once the static mappings are in place. + */ + +static void __init pmd_empty_section_gap(unsigned long addr) +{ + struct vm_struct *vm; + + vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); + vm->addr = (void *)addr; + vm->size = SECTION_SIZE; + vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->caller = pmd_empty_section_gap; + vm_area_add_early(vm); +} + +static void __init fill_pmd_gaps(void) +{ + struct vm_struct *vm; + unsigned long addr, next = 0; + pmd_t *pmd; + + /* we're still single threaded hence no lock needed here */ + for (vm = vmlist; vm; vm = vm->next) { + if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + continue; + addr = (unsigned long)vm->addr; + if (addr < next) + continue; + + /* + * Check if this vm starts on an odd section boundary. + * If so and the first section entry for this PMD is free + * then we block the corresponding virtual address. + */ + if ((addr & ~PMD_MASK) == SECTION_SIZE) { + pmd = pmd_off_k(addr); + if (pmd_none(*pmd)) + pmd_empty_section_gap(addr & PMD_MASK); + } + + /* + * Then check if this vm ends on an odd section boundary. + * If so and the second section entry for this PMD is empty + * then we block the corresponding virtual address. + */ + addr += vm->size; + if ((addr & ~PMD_MASK) == SECTION_SIZE) { + pmd = pmd_off_k(addr) + 1; + if (pmd_none(*pmd)) + pmd_empty_section_gap(addr); + } + + /* no need to look at any vm entry until we hit the next PMD */ + next = (addr + PMD_SIZE - 1) & PMD_MASK; + } +} + +#else +#define fill_pmd_gaps() do { } while (0) +#endif + static void * __initdata vmalloc_min = (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET); @@ -1072,6 +1145,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ if (mdesc->map_io) mdesc->map_io(); + fill_pmd_gaps(); /* * Finally flush the caches and tlb to ensure that we're in a diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c index 16d0ec4df5f6..a5c9ad5721c2 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c @@ -20,6 +20,11 @@ const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst = imx_mxc_rtc_data_entry_single(MX31); #endif /* ifdef CONFIG_SOC_IMX31 */ +#ifdef CONFIG_SOC_IMX35 +const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst = + imx_mxc_rtc_data_entry_single(MX35); +#endif /* ifdef CONFIG_SOC_IMX35 */ + struct platform_device *__init imx_add_mxc_rtc( const struct imx_mxc_rtc_data *data) { diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index e429ca1b814a..7cfcc44537f0 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -67,6 +67,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx27_clocks_init_dt(void); +extern int mx31_clocks_init_dt(void); extern int mx51_clocks_init_dt(void); extern int mx53_clocks_init_dt(void); extern int mx6q_clocks_init(void); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index 36c8989d9de6..2623e7a2e190 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -107,11 +107,13 @@ #define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL) #define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL) #define MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D25__GPT_CMPOUT1 IOMUX_PAD(0x414, 0x080, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL) #define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL) #define MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D26__GPT_CMPOUT2 IOMUX_PAD(0x418, 0x084, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL) @@ -228,6 +230,7 @@ #define MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DRAM_CS1__CCM_CLKO IOMUX_PAD(0x4d0, 0x104, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL) @@ -256,12 +259,14 @@ #define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB1__GPT_CMPOUT2 IOMUX_PAD(0x4fc, 0x120, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2) #define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__GPT_CMPOUT3 IOMUX_PAD(0x500, 0x124, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL) @@ -637,7 +642,9 @@ #define MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_DISP_CLK__DI1_DISP_CLK IOMUX_PAD(0x730, __NA_, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN15__DI1_PIN15 IOMUX_PAD(0x738, __NA_, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL) #define MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL) @@ -780,6 +787,8 @@ #define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL) +#define MX51_PAD_GPIO1_3__CCM_CLKO2 IOMUX_PAD(0x7d8, 0x3d0, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_3__GPT_CLKIN IOMUX_PAD(0x7d8, 0x3d0, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL) @@ -788,13 +797,16 @@ #define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_4__GPT_CAPIN1 IOMUX_PAD(0x804, 0x3d8, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_5__CCM_CLKO IOMUX_PAD(0x808, 0x3dc, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_6__GPT_CAPIN2 IOMUX_PAD(0x80c, 0x3e0, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL) @@ -803,11 +815,13 @@ #define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_8__CCM_CLKO2 IOMUX_PAD(0x814, 0x3e8, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_9__CCM_CLKO IOMUX_PAD(0x818, 0x3ec, 4, __NA_, 0, NO_PAD_CTRL) #endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 9ffd1bbe615f..7eb9d1329671 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -20,13 +20,15 @@ #define MXC_EHCI_INTERFACE_MASK (0xf) #define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_TTL_ENABLED (1 << 6) - -#define MXC_EHCI_INTERNAL_PHY (1 << 7) -#define MXC_EHCI_IPPUE_DOWN (1 << 8) -#define MXC_EHCI_IPPUE_UP (1 << 9) -#define MXC_EHCI_WAKEUP_ENABLED (1 << 10) -#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 11) +#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) +#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) +#define MXC_EHCI_TTL_ENABLED (1 << 8) + +#define MXC_EHCI_INTERNAL_PHY (1 << 9) +#define MXC_EHCI_IPPUE_DOWN (1 << 10) +#define MXC_EHCI_IPPUE_UP (1 << 11) +#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) +#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) #define MXC_USBCTRL_OFFSET 0 #define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index e2d911d16fb4..68b180edcfff 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -243,9 +243,7 @@ IS_AM_SUBCLASS(335x, 0x335) /* * Macros to detect individual cpu types. * These are only rarely needed. - * cpu_is_omap330(): True for OMAP330 - * cpu_is_omap730(): True for OMAP730 - * cpu_is_omap850(): True for OMAP850 + * cpu_is_omap310(): True for OMAP310 * cpu_is_omap1510(): True for OMAP1510 * cpu_is_omap1610(): True for OMAP1610 * cpu_is_omap1611(): True for OMAP1611 @@ -267,8 +265,6 @@ static inline int is_omap ##type (void) \ } IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(730, 0x0730) -IS_OMAP_TYPE(850, 0x0850) IS_OMAP_TYPE(1510, 0x1510) IS_OMAP_TYPE(1610, 0x1610) IS_OMAP_TYPE(1611, 0x1611) @@ -282,8 +278,6 @@ IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap310() 0 -#define cpu_is_omap730() 0 -#define cpu_is_omap850() 0 #define cpu_is_omap1510() 0 #define cpu_is_omap1610() 0 #define cpu_is_omap5912() 0 @@ -300,19 +294,9 @@ IS_OMAP_TYPE(3430, 0x3430) /* * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710. + * between 310 vs. 1510 and 1611B/5912 vs. 1710. */ -#if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() is_omap730() -#endif - -#if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap850 -# define cpu_is_omap850() is_omap850() -#endif - #if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap310 # undef cpu_is_omap1510 diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index aeba71796ad9..323948959200 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -99,7 +99,7 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config diff --git a/arch/arm/plat-omap/include/plat/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h deleted file mode 100644 index 14272bc1a6fd..000000000000 --- a/arch/arm/plat-omap/include/plat/omap730.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap730.h - * - * Hardware definitions for TI OMAP730 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP730_H -#define __ASM_ARCH_OMAP730_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP730_DSP_BASE 0xE0000000 -#define OMAP730_DSP_SIZE 0x50000 -#define OMAP730_DSP_START 0xE0000000 - -#define OMAP730_DSPREG_BASE 0xE1000000 -#define OMAP730_DSPREG_SIZE SZ_128K -#define OMAP730_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_CONFIG_BASE 0xfffe1000 -#define OMAP730_IO_CONF_0 0xfffe1070 -#define OMAP730_IO_CONF_1 0xfffe1074 -#define OMAP730_IO_CONF_2 0xfffe1078 -#define OMAP730_IO_CONF_3 0xfffe107c -#define OMAP730_IO_CONF_4 0xfffe1080 -#define OMAP730_IO_CONF_5 0xfffe1084 -#define OMAP730_IO_CONF_6 0xfffe1088 -#define OMAP730_IO_CONF_7 0xfffe108c -#define OMAP730_IO_CONF_8 0xfffe1090 -#define OMAP730_IO_CONF_9 0xfffe1094 -#define OMAP730_IO_CONF_10 0xfffe1098 -#define OMAP730_IO_CONF_11 0xfffe109c -#define OMAP730_IO_CONF_12 0xfffe10a0 -#define OMAP730_IO_CONF_13 0xfffe10a4 - -#define OMAP730_MODE_1 0xfffe1010 -#define OMAP730_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP730_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_FLASH_CFG_0 0xfffecc10 -#define OMAP730_FLASH_ACFG_0 0xfffecc50 -#define OMAP730_FLASH_CFG_1 0xfffecc14 -#define OMAP730_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_ICR_BASE 0xfffbb800 -#define OMAP730_DSP_M_CTL 0xfffbb804 -#define OMAP730_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP730_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h deleted file mode 100644 index c33f67981712..000000000000 --- a/arch/arm/plat-omap/include/plat/omap850.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap850.h - * - * Hardware definitions for TI OMAP850 processor. - * - * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP850_H -#define __ASM_ARCH_OMAP850_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP850_DSP_BASE 0xE0000000 -#define OMAP850_DSP_SIZE 0x50000 -#define OMAP850_DSP_START 0xE0000000 - -#define OMAP850_DSPREG_BASE 0xE1000000 -#define OMAP850_DSPREG_SIZE SZ_128K -#define OMAP850_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_CONFIG_BASE 0xfffe1000 -#define OMAP850_IO_CONF_0 0xfffe1070 -#define OMAP850_IO_CONF_1 0xfffe1074 -#define OMAP850_IO_CONF_2 0xfffe1078 -#define OMAP850_IO_CONF_3 0xfffe107c -#define OMAP850_IO_CONF_4 0xfffe1080 -#define OMAP850_IO_CONF_5 0xfffe1084 -#define OMAP850_IO_CONF_6 0xfffe1088 -#define OMAP850_IO_CONF_7 0xfffe108c -#define OMAP850_IO_CONF_8 0xfffe1090 -#define OMAP850_IO_CONF_9 0xfffe1094 -#define OMAP850_IO_CONF_10 0xfffe1098 -#define OMAP850_IO_CONF_11 0xfffe109c -#define OMAP850_IO_CONF_12 0xfffe10a0 -#define OMAP850_IO_CONF_13 0xfffe10a4 - -#define OMAP850_MODE_1 0xfffe1010 -#define OMAP850_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP850_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_FLASH_CFG_0 0xfffecc10 -#define OMAP850_FLASH_ACFG_0 0xfffecc50 -#define OMAP850_FLASH_CFG_1 0xfffecc14 -#define OMAP850_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_ICR_BASE 0xfffbb800 -#define OMAP850_DSP_M_CTL 0xfffbb804 -#define OMAP850_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP850_H */ - diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index ad32621aa52e..5e13c3884aa4 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -282,6 +282,8 @@ static int omap_mbox_startup(struct omap_mbox *mbox) } mbox->rxq = mq; mq->mbox = mbox; + + omap_mbox_enable_irq(mbox, IRQ_RX); } mutex_unlock(&mbox_configured_lock); return 0; @@ -305,6 +307,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox) mutex_lock(&mbox_configured_lock); if (!--mbox->use_count) { + omap_mbox_disable_irq(mbox, IRQ_RX); free_irq(mbox->irq, mbox); tasklet_kill(&mbox->txq->tasklet); flush_work_sync(&mbox->rxq->work); @@ -338,13 +341,15 @@ struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) if (!mbox) return ERR_PTR(-ENOENT); - ret = omap_mbox_startup(mbox); - if (ret) - return ERR_PTR(-ENODEV); - if (nb) blocking_notifier_chain_register(&mbox->notifier, nb); + ret = omap_mbox_startup(mbox); + if (ret) { + blocking_notifier_chain_unregister(&mbox->notifier, nb); + return ERR_PTR(-ENODEV); + } + return mbox; } EXPORT_SYMBOL(omap_mbox_get); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a2fae4ea0936..7aca31c1df1f 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -78,6 +78,10 @@ config S5P_HRT # clock options +config SAMSUNG_CLOCK + bool + default y if !COMMON_CLK + config SAMSUNG_CLKSRC bool help @@ -491,14 +495,6 @@ config S5P_SLEEP Internal config node to apply common S5P sleep management code. Can be selected by S5P and newer SoCs with similar sleep procedure. -comment "Power Domain" - -config SAMSUNG_PD - bool "Samsung Power Domain" - depends on PM_RUNTIME - help - Say Y here if you want to control Power Domain by Runtime PM. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 860b2db4db15..b78717496677 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -15,8 +15,8 @@ obj-y += init.o cpu.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-$(CONFIG_S5P_HRT) += s5p-time.o -obj-y += clock.o -obj-y += pwm-clock.o +obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o +obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o @@ -60,10 +60,6 @@ obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o -# PD support - -obj-$(CONFIG_SAMSUNG_PD) += pd.o - # PWM support obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 33ecd0c9f0c3..b1e05ccff3ac 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -157,11 +157,13 @@ int s3c_adc_start(struct s3c_adc_client *client, return -EINVAL; } - if (client->is_ts && adc->ts_pend) - return -EAGAIN; - spin_lock_irqsave(&adc->lock, flags); + if (client->is_ts && adc->ts_pend) { + spin_unlock_irqrestore(&adc->lock, flags); + return -EAGAIN; + } + client->channel = channel; client->nr_samples = nr_samples; diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 1d214cb9d770..74e31ce35538 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -126,7 +126,8 @@ struct platform_device s3c_device_adc = { #ifdef CONFIG_CPU_S3C2440 static struct resource s3c_camif_resource[] = { [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF), - [1] = DEFINE_RES_IRQ(IRQ_CAM), + [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C), + [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P), }; struct platform_device s3c_device_camif = { @@ -1512,7 +1513,7 @@ static struct resource s3c64xx_spi0_resource[] = { }; struct platform_device s3c64xx_device_spi0 = { - .name = "s3c64xx-spi", + .name = "s3c6410-spi", .id = 0, .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource), .resource = s3c64xx_spi0_resource, @@ -1522,13 +1523,10 @@ struct platform_device s3c64xx_device_spi0 = { }, }; -void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs) +void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs) { - if (!pd) { - pr_err("%s:Need to pass platform data\n", __func__); - return; - } + struct s3c64xx_spi_info pd; /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0) { @@ -1536,12 +1534,11 @@ void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, return; } - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - if (!pd->cfg_gpio) - pd->cfg_gpio = s3c64xx_spi0_cfg_gpio; + pd.num_cs = num_cs; + pd.src_clk_nr = src_clk_nr; + pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; - s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0); + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } #endif /* CONFIG_S3C64XX_DEV_SPI0 */ @@ -1554,7 +1551,7 @@ static struct resource s3c64xx_spi1_resource[] = { }; struct platform_device s3c64xx_device_spi1 = { - .name = "s3c64xx-spi", + .name = "s3c6410-spi", .id = 1, .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource), .resource = s3c64xx_spi1_resource, @@ -1564,26 +1561,20 @@ struct platform_device s3c64xx_device_spi1 = { }, }; -void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs) +void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs) { - if (!pd) { - pr_err("%s:Need to pass platform data\n", __func__); - return; - } - /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0) { pr_err("%s: Invalid SPI configuration\n", __func__); return; } - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - if (!pd->cfg_gpio) - pd->cfg_gpio = s3c64xx_spi1_cfg_gpio; + pd.num_cs = num_cs; + pd.src_clk_nr = src_clk_nr; + pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; - s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1); + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } #endif /* CONFIG_S3C64XX_DEV_SPI1 */ @@ -1596,7 +1587,7 @@ static struct resource s3c64xx_spi2_resource[] = { }; struct platform_device s3c64xx_device_spi2 = { - .name = "s3c64xx-spi", + .name = "s3c6410-spi", .id = 2, .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource), .resource = s3c64xx_spi2_resource, @@ -1606,13 +1597,10 @@ struct platform_device s3c64xx_device_spi2 = { }, }; -void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs) +void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs) { - if (!pd) { - pr_err("%s:Need to pass platform data\n", __func__); - return; - } + struct s3c64xx_spi_info pd; /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0) { @@ -1620,11 +1608,10 @@ void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, return; } - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - if (!pd->cfg_gpio) - pd->cfg_gpio = s3c64xx_spi2_cfg_gpio; + pd.num_cs = num_cs; + pd.src_clk_nr = src_clk_nr; + pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; - s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2); + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); } #endif /* CONFIG_S3C64XX_DEV_SPI2 */ diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index eb9f4f534006..c38d75489240 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -19,72 +19,79 @@ #include <mach/dma.h> static unsigned samsung_dmadev_request(enum dma_ch dma_ch, - struct samsung_dma_info *info) + struct samsung_dma_req *param) { - struct dma_chan *chan; dma_cap_mask_t mask; - struct dma_slave_config slave_config; void *filter_param; dma_cap_zero(mask); - dma_cap_set(info->cap, mask); + dma_cap_set(param->cap, mask); /* * If a dma channel property of a device node from device tree is * specified, use that as the fliter parameter. */ - filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop : - (void *)dma_ch; - chan = dma_request_channel(mask, pl330_filter, filter_param); + filter_param = (dma_ch == DMACH_DT_PROP) ? + (void *)param->dt_dmach_prop : (void *)dma_ch; + return (unsigned)dma_request_channel(mask, pl330_filter, filter_param); +} + +static int samsung_dmadev_release(unsigned ch, void *param) +{ + dma_release_channel((struct dma_chan *)ch); - if (info->direction == DMA_DEV_TO_MEM) { + return 0; +} + +static int samsung_dmadev_config(unsigned ch, + struct samsung_dma_config *param) +{ + struct dma_chan *chan = (struct dma_chan *)ch; + struct dma_slave_config slave_config; + + if (param->direction == DMA_DEV_TO_MEM) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); - slave_config.direction = info->direction; - slave_config.src_addr = info->fifo; - slave_config.src_addr_width = info->width; + slave_config.direction = param->direction; + slave_config.src_addr = param->fifo; + slave_config.src_addr_width = param->width; slave_config.src_maxburst = 1; dmaengine_slave_config(chan, &slave_config); - } else if (info->direction == DMA_MEM_TO_DEV) { + } else if (param->direction == DMA_MEM_TO_DEV) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); - slave_config.direction = info->direction; - slave_config.dst_addr = info->fifo; - slave_config.dst_addr_width = info->width; + slave_config.direction = param->direction; + slave_config.dst_addr = param->fifo; + slave_config.dst_addr_width = param->width; slave_config.dst_maxburst = 1; dmaengine_slave_config(chan, &slave_config); + } else { + pr_warn("unsupported direction\n"); + return -EINVAL; } - return (unsigned)chan; -} - -static int samsung_dmadev_release(unsigned ch, - struct s3c2410_dma_client *client) -{ - dma_release_channel((struct dma_chan *)ch); - return 0; } static int samsung_dmadev_prepare(unsigned ch, - struct samsung_dma_prep_info *info) + struct samsung_dma_prep *param) { struct scatterlist sg; struct dma_chan *chan = (struct dma_chan *)ch; struct dma_async_tx_descriptor *desc; - switch (info->cap) { + switch (param->cap) { case DMA_SLAVE: sg_init_table(&sg, 1); - sg_dma_len(&sg) = info->len; - sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)), - info->len, offset_in_page(info->buf)); - sg_dma_address(&sg) = info->buf; + sg_dma_len(&sg) = param->len; + sg_set_page(&sg, pfn_to_page(PFN_DOWN(param->buf)), + param->len, offset_in_page(param->buf)); + sg_dma_address(&sg) = param->buf; desc = dmaengine_prep_slave_sg(chan, - &sg, 1, info->direction, DMA_PREP_INTERRUPT); + &sg, 1, param->direction, DMA_PREP_INTERRUPT); break; case DMA_CYCLIC: - desc = dmaengine_prep_dma_cyclic(chan, - info->buf, info->len, info->period, info->direction); + desc = dmaengine_prep_dma_cyclic(chan, param->buf, + param->len, param->period, param->direction); break; default: dev_err(&chan->dev->device, "unsupported format\n"); @@ -96,8 +103,8 @@ static int samsung_dmadev_prepare(unsigned ch, return -EFAULT; } - desc->callback = info->fp; - desc->callback_param = info->fp_param; + desc->callback = param->fp; + desc->callback_param = param->fp_param; dmaengine_submit((struct dma_async_tx_descriptor *)desc); @@ -119,6 +126,7 @@ static inline int samsung_dmadev_flush(unsigned ch) static struct samsung_dma_ops dmadev_ops = { .request = samsung_dmadev_request, .release = samsung_dmadev_release, + .config = samsung_dmadev_config, .prepare = samsung_dmadev_prepare, .trigger = samsung_dmadev_trigger, .started = NULL, diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 0721293fad63..ace4451b7651 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -132,6 +132,10 @@ IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } +#ifndef KHZ +#define KHZ (1000) +#endif + #ifndef MHZ #define MHZ (1000*1000) #endif diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 61ca2f356c52..5da4b4f38f40 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -131,7 +131,6 @@ extern struct platform_device exynos4_device_ohci; extern struct platform_device exynos4_device_pcm0; extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; -extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos_device_drm; diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 71a6827c7706..f5144cdd3001 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -16,7 +16,13 @@ #include <linux/dmaengine.h> #include <mach/dma.h> -struct samsung_dma_prep_info { +struct samsung_dma_req { + enum dma_transaction_type cap; + struct property *dt_dmach_prop; + struct s3c2410_dma_client *client; +}; + +struct samsung_dma_prep { enum dma_transaction_type cap; enum dma_transfer_direction direction; dma_addr_t buf; @@ -26,19 +32,17 @@ struct samsung_dma_prep_info { void *fp_param; }; -struct samsung_dma_info { - enum dma_transaction_type cap; +struct samsung_dma_config { enum dma_transfer_direction direction; enum dma_slave_buswidth width; dma_addr_t fifo; - struct s3c2410_dma_client *client; - struct property *dt_dmach_prop; }; struct samsung_dma_ops { - unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info); - int (*release)(unsigned ch, struct s3c2410_dma_client *client); - int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info); + unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param); + int (*release)(unsigned ch, void *param); + int (*config)(unsigned ch, struct samsung_dma_config *param); + int (*prepare)(unsigned ch, struct samsung_dma_prep *param); int (*trigger)(unsigned ch); int (*started)(unsigned ch); int (*flush)(unsigned ch); diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 536002ff2ab8..b885322717a1 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -43,7 +43,6 @@ struct s3c_fb_pd_win { * @setup_gpio: Setup the external GPIO pins to the right state to transfer * the data from the display system to the connected display * device. - * @default_win: default window layer number to be used for UI layer. * @vidcon0: The base vidcon0 values to control the panel data format. * @vidcon1: The base vidcon1 values to control the panel data output. * @vtiming: Video timing when connected to a RGB type panel. diff --git a/arch/arm/plat-samsung/include/plat/pd.h b/arch/arm/plat-samsung/include/plat/pd.h deleted file mode 100644 index abb4bc32716a..000000000000 --- a/arch/arm/plat-samsung/include/plat/pd.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/pd.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_SAMSUNG_PD_H -#define __ASM_PLAT_SAMSUNG_PD_H __FILE__ - -struct samsung_pd_info { - int (*enable)(struct device *dev); - int (*disable)(struct device *dev); - void __iomem *base; -}; - -enum exynos4_pd_block { - PD_MFC, - PD_G3D, - PD_LCD0, - PD_LCD1, - PD_TV, - PD_CAM, - PD_GPS -}; - -#endif /* __ASM_PLAT_SAMSUNG_PD_H */ diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index fa95e9a00972..ceba18d23a5a 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -18,7 +18,6 @@ struct platform_device; * @fb_delay: Slave specific feedback delay. * Refer to FB_CLK_SEL register definition in SPI chapter. * @line: Custom 'identity' of the CS line. - * @set_level: CS line control. * * This is per SPI-Slave Chipselect information. * Allocate and initialize one in machine init code and make the @@ -27,57 +26,41 @@ struct platform_device; struct s3c64xx_spi_csinfo { u8 fb_delay; unsigned line; - void (*set_level)(unsigned line_id, int lvl); }; /** * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. - * @clk_from_cmu: If the SPI clock/prescalar control block is present - * by the platform's clock-management-unit and not in SPI controller. * @num_cs: Number of CS this controller emulates. * @cfg_gpio: Configure pins for this SPI controller. - * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 - * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number - * @high_speed: If the controller supports HIGH_SPEED_EN bit - * @tx_st_done: Depends on tx fifo_lvl field */ struct s3c64xx_spi_info { int src_clk_nr; - bool clk_from_cmu; - int num_cs; - - int (*cfg_gpio)(struct platform_device *pdev); - - /* Following two fields are for future compatibility */ - int fifo_lvl_mask; - int rx_lvl_offset; - int high_speed; - int tx_st_done; + int (*cfg_gpio)(void); }; /** * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board * initialization code. - * @pd: SPI platform data to set. + * @cfg_gpio: Pointer to gpio setup function. * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. * @num_cs: Number of elements in the 'cs' array. * * Call this from machine init code for each SPI Controller that * has some chips attached to it. */ -extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs); -extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs); -extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs); +extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); /* defined by architecture to configure gpio */ -extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev); -extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev); -extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev); +extern int s3c64xx_spi0_cfg_gpio(void); +extern int s3c64xx_spi1_cfg_gpio(void); +extern int s3c64xx_spi2_cfg_gpio(void); extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c deleted file mode 100644 index 312b510d86b7..000000000000 --- a/arch/arm/plat-samsung/pd.c +++ /dev/null @@ -1,95 +0,0 @@ -/* linux/arch/arm/plat-samsung/pd.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung Power domain support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/export.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <linux/pm_runtime.h> - -#include <plat/pd.h> - -static int samsung_pd_probe(struct platform_device *pdev) -{ - struct samsung_pd_info *pdata = pdev->dev.platform_data; - struct device *dev = &pdev->dev; - - if (!pdata) { - dev_err(dev, "no device data specified\n"); - return -ENOENT; - } - - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - - dev_info(dev, "power domain registered\n"); - return 0; -} - -static int __devexit samsung_pd_remove(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - - pm_runtime_disable(dev); - return 0; -} - -static int samsung_pd_runtime_suspend(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - int ret = 0; - - if (pdata->disable) - ret = pdata->disable(dev); - - dev_dbg(dev, "suspended\n"); - return ret; -} - -static int samsung_pd_runtime_resume(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - int ret = 0; - - if (pdata->enable) - ret = pdata->enable(dev); - - dev_dbg(dev, "resumed\n"); - return ret; -} - -static const struct dev_pm_ops samsung_pd_pm_ops = { - .runtime_suspend = samsung_pd_runtime_suspend, - .runtime_resume = samsung_pd_runtime_resume, -}; - -static struct platform_driver samsung_pd_driver = { - .driver = { - .name = "samsung-pd", - .owner = THIS_MODULE, - .pm = &samsung_pd_pm_ops, - }, - .probe = samsung_pd_probe, - .remove = __devexit_p(samsung_pd_remove), -}; - -static int __init samsung_pd_init(void) -{ - int ret; - - ret = platform_driver_register(&samsung_pd_driver); - if (ret) - printk(KERN_ERR "%s: failed to add PD driver\n", __func__); - - return ret; -} -arch_initcall(samsung_pd_init); diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index c559d8438c70..d3583050fb05 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -36,7 +36,6 @@ struct pwm_device { unsigned int duty_ns; unsigned char tcon_base; - unsigned char running; unsigned char use_count; unsigned char pwm_id; }; @@ -116,7 +115,6 @@ int pwm_enable(struct pwm_device *pwm) local_irq_restore(flags); - pwm->running = 1; return 0; } @@ -134,8 +132,6 @@ void pwm_disable(struct pwm_device *pwm) __raw_writel(tcon, S3C2410_TCON); local_irq_restore(flags); - - pwm->running = 0; } EXPORT_SYMBOL(pwm_disable); diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c index 781494912827..f99448c48d30 100644 --- a/arch/arm/plat-samsung/s3c-dma-ops.c +++ b/arch/arm/plat-samsung/s3c-dma-ops.c @@ -36,30 +36,26 @@ static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param, } static unsigned s3c_dma_request(enum dma_ch dma_ch, - struct samsung_dma_info *info) + struct samsung_dma_req *param) { struct cb_data *data; - if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) { - s3c2410_dma_free(dma_ch, info->client); + if (s3c2410_dma_request(dma_ch, param->client, NULL) < 0) { + s3c2410_dma_free(dma_ch, param->client); return 0; } + if (param->cap == DMA_CYCLIC) + s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR); + data = kzalloc(sizeof(struct cb_data), GFP_KERNEL); data->ch = dma_ch; list_add_tail(&data->node, &dma_list); - s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo); - - if (info->cap == DMA_CYCLIC) - s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR); - - s3c2410_dma_config(dma_ch, info->width); - return (unsigned)dma_ch; } -static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client) +static int s3c_dma_release(unsigned ch, void *param) { struct cb_data *data; @@ -68,16 +64,24 @@ static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client) break; list_del(&data->node); - s3c2410_dma_free(ch, client); + s3c2410_dma_free(ch, param); kfree(data); return 0; } -static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info) +static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param) +{ + s3c2410_dma_devconfig(ch, param->direction, param->fifo); + s3c2410_dma_config(ch, param->width); + + return 0; +} + +static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param) { struct cb_data *data; - int len = (info->cap == DMA_CYCLIC) ? info->period : info->len; + int len = (param->cap == DMA_CYCLIC) ? param->period : param->len; list_for_each_entry(data, &dma_list, node) if (data->ch == ch) @@ -85,11 +89,11 @@ static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info) if (!data->fp) { s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb); - data->fp = info->fp; - data->fp_param = info->fp_param; + data->fp = param->fp; + data->fp_param = param->fp_param; } - s3c2410_dma_enqueue(ch, (void *)data, info->buf, len); + s3c2410_dma_enqueue(ch, (void *)data, param->buf, len); return 0; } @@ -117,6 +121,7 @@ static inline int s3c_dma_stop(unsigned ch) static struct samsung_dma_ops s3c_dma_ops = { .request = s3c_dma_request, .release = s3c_dma_release, + .config = s3c_dma_config, .prepare = s3c_dma_prepare, .trigger = s3c_dma_trigger, .started = s3c_dma_started, diff --git a/arch/arm/plat-samsung/s5p-clock.c b/arch/arm/plat-samsung/s5p-clock.c index 031a61899bef..48a159911037 100644 --- a/arch/arm/plat-samsung/s5p-clock.c +++ b/arch/arm/plat-samsung/s5p-clock.c @@ -37,6 +37,7 @@ struct clk clk_ext_xtal_mux = { struct clk clk_xusbxti = { .name = "xusbxti", .id = -1, + .rate = 24000000, }; struct clk s5p_clk_27m = { diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 81ee7cc34457..8d5c10a5084d 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -1,5 +1,8 @@ if PLAT_VERSATILE +config PLAT_VERSATILE_CLOCK + bool + config PLAT_VERSATILE_CLCD bool diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index a5cb1945bdcc..272769a8a7d6 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,4 +1,4 @@ -obj-y := clock.o +obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o |
