diff options
Diffstat (limited to 'arch/arm')
122 files changed, 2189 insertions, 1345 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8c05d4321ae9..1523046e092b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,6 +9,7 @@ config ARM bool default y select RTC_LIB + select SYS_SUPPORTS_APM_EMULATION help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -17,6 +18,9 @@ config ARM Europe. There is an ARM Linux project with a web page at <http://www.arm.linux.org.uk/>. +config SYS_SUPPORTS_APM_EMULATION + bool + config GENERIC_TIME bool default n @@ -74,6 +78,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config ARCH_HAS_ILOG2_U32 + bool + default n + +config ARCH_HAS_ILOG2_U64 + bool + default n + config GENERIC_HWEIGHT bool default y @@ -732,7 +744,7 @@ config XIP_PHYS_ADDR endmenu -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX ) menu "CPU Frequency scaling" @@ -759,6 +771,15 @@ config CPU_FREQ_INTEGRATOR If in doubt, say Y. +config CPU_FREQ_IMX + tristate "CPUfreq driver for i.MX CPUs" + depends on ARCH_IMX && CPU_FREQ + default n + help + This enables the CPUfreq driver for i.MX CPUs. + + If in doubt, say N. + endmenu endif @@ -839,31 +860,6 @@ menu "Power management options" source "kernel/power/Kconfig" -config APM - tristate "Advanced Power Management Emulation" - ---help--- - APM is a BIOS specification for saving power using several different - techniques. This is mostly useful for battery powered laptops with - APM compliant BIOSes. If you say Y here, the system time will be - reset after a RESUME operation, the /proc/apm device will provide - battery status information, and user-space programs will receive - notification of APM "events" (e.g. battery status change). - - In order to use APM, you will need supporting software. For location - and more information, read <file:Documentation/pm.txt> and the - Battery Powered Linux mini-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - This driver does not spin down disk drives (see the hdparm(8) - manpage ("man 8 hdparm") for that), and it doesn't turn off - VESA-compliant "green" monitors. - - Generally, if you don't have a battery in your machine, there isn't - much point in using this driver and you should say N. If you get - random kernel OOPSes or reboots that don't seem to be related to - anything, try disabling/enabling this option (or disabling/enabling - APM in your BIOS). - endmenu source "net/Kconfig" @@ -937,6 +933,8 @@ source "drivers/video/Kconfig" source "sound/Kconfig" +source "drivers/hid/Kconfig" + source "drivers/usb/Kconfig" source "drivers/mmc/Kconfig" diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index b3599743093b..a3b450f8ef17 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -27,7 +27,7 @@ #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> -#include <asm/apm.h> +#include <asm/apm-emulation.h> #include <asm/arch/pm.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/sharpsl.h> diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 79049206dfa5..46b0c734aeb9 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -923,7 +923,6 @@ CONFIG_FORCED_INLINING=y # CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 784ad7c0186d..fcd8fa091e9d 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -1079,7 +1079,6 @@ CONFIG_FORCED_INLINING=y # CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index f8a66b72ad5d..24a701ab33e5 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1-git9 -# Sat Jul 15 15:08:10 2006 +# Linux kernel version: 2.6.20-rc1 +# Sat Dec 16 06:05:24 2006 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 @@ -28,18 +32,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -48,12 +56,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -71,7 +79,10 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -103,7 +114,9 @@ CONFIG_ARCH_EP93XX=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set @@ -127,6 +140,7 @@ CONFIG_CRUNCH=y # CONFIG_MACH_ADSSPHERE=y CONFIG_MACH_EDB9302=y +CONFIG_MACH_EDB9302A=y CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y CONFIG_MACH_EDB9315A=y @@ -138,12 +152,14 @@ CONFIG_MACH_TS72XX=y # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -230,6 +246,7 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set CONFIG_NET_KEY=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -250,13 +267,29 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -283,7 +316,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -330,7 +362,7 @@ CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # @@ -342,6 +374,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -430,7 +463,7 @@ CONFIG_MTD_NAND_IDS=y # # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set @@ -442,6 +475,8 @@ CONFIG_MTD_NAND_IDS=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # @@ -460,23 +495,29 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -513,6 +554,7 @@ CONFIG_NETDEVICES=y # CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_EP93XX_ETH=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -607,17 +649,12 @@ CONFIG_EP93XX_WATCHDOG=y # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -645,7 +682,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -664,6 +701,7 @@ CONFIG_I2C_DEBUG_CHIP=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -697,12 +735,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -711,6 +752,7 @@ CONFIG_HWMON=y # # Misc devices # +# CONFIG_TIFM_CORE is not set # # LED devices @@ -729,7 +771,6 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -742,6 +783,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -763,6 +805,7 @@ CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -797,12 +840,12 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # -# CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers @@ -821,6 +864,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set @@ -834,8 +878,8 @@ CONFIG_USB_RTL8150=y CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set @@ -857,6 +901,8 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_HP4X is not set @@ -867,12 +913,14 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -880,11 +928,12 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -908,6 +957,7 @@ CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # # RTC interfaces @@ -921,7 +971,7 @@ CONFIG_RTC_INTF_DEV=y # RTC drivers # # CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_DS1307 is not set +CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set @@ -943,12 +993,14 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -980,8 +1032,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -1102,6 +1156,11 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1110,8 +1169,11 @@ CONFIG_NLS_ISO8859_1=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y @@ -1128,10 +1190,9 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y @@ -1151,12 +1212,9 @@ CONFIG_DEBUG_LL=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -1164,3 +1222,4 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index f6e46193fd26..43c4a37e9247 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Fri Dec 1 10:51:01 2006 +# Linux kernel version: 2.6.20-rc1-git5 +# Tue Dec 19 21:38:01 2006 # CONFIG_ARM=y # CONFIG_GENERIC_TIME is not set @@ -11,6 +11,8 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 @@ -39,6 +41,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -77,7 +80,9 @@ CONFIG_KMOD=y # Block layer # CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -154,11 +159,13 @@ CONFIG_IO_36=y CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_IWMMXT is not set # # Bus support # CONFIG_PCI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set # # PCCARD (PCMCIA/CardBus) support @@ -259,9 +266,23 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IPV6 is not set +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -433,7 +454,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 @@ -448,6 +469,7 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -467,6 +489,7 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports @@ -510,6 +533,7 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers @@ -605,6 +629,7 @@ CONFIG_E1000_NAPI=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -711,10 +736,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -820,6 +841,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -830,6 +852,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -883,6 +906,11 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -970,6 +998,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +CONFIG_ECRYPT_FS=y # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1092,6 +1121,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1103,28 +1137,68 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y -# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_USER=y # # Security options # -# CONFIG_KEYS is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_WP512=y +CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y +CONFIG_CRYPTO_SERPENT=y +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_CAST5=y +CONFIG_CRYPTO_CAST6=y +CONFIG_CRYPTO_TEA=y +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_KHAZAD=y +CONFIG_CRYPTO_ANUBIS=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -1132,3 +1206,4 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index b275c53728ec..7909a555706d 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -1,15 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc7 -# Tue Sep 19 00:30:18 2006 +# Linux kernel version: 2.6.20-rc1-git5 +# Tue Dec 19 21:37:52 2006 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 @@ -29,18 +32,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -49,12 +56,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -72,7 +79,10 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -106,6 +116,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IMX is not set CONFIG_ARCH_IOP32X=y # CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set @@ -141,17 +152,22 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # # CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_IWMMXT is not set CONFIG_XSCALE_PMU=y # # Bus support # CONFIG_PCI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # @@ -225,6 +241,7 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -246,13 +263,29 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -279,7 +312,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -338,6 +370,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -419,9 +452,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 @@ -440,6 +475,8 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -458,14 +495,16 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers @@ -478,26 +517,84 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # # Multi-device support (RAID and LVM) @@ -512,6 +609,7 @@ CONFIG_MD_RAID1=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_MIRROR is not set @@ -612,6 +710,7 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -620,6 +719,7 @@ CONFIG_R8169=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -654,6 +754,7 @@ CONFIG_R8169=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -725,10 +826,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -736,7 +833,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -801,6 +897,7 @@ CONFIG_I2C_IOP3XX=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -834,15 +931,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -851,6 +951,8 @@ CONFIG_HWMON=y # # Misc devices # +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # # LED devices @@ -869,12 +971,12 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -895,6 +997,11 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -909,6 +1016,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -946,6 +1054,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # @@ -984,6 +1093,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -1001,6 +1111,7 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -1008,12 +1119,13 @@ CONFIG_USB_MON=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # # USB DSL modem support @@ -1045,6 +1157,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1056,6 +1169,7 @@ CONFIG_XFS_FS=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1084,8 +1198,10 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -1095,6 +1211,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +CONFIG_ECRYPT_FS=y # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1129,7 +1246,7 @@ CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set +CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1172,6 +1289,11 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1180,8 +1302,11 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y @@ -1197,10 +1322,9 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y @@ -1211,13 +1335,48 @@ CONFIG_DEBUG_LL=y # # Security options # -# CONFIG_KEYS is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_WP512=y +CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y +CONFIG_CRYPTO_SERPENT=y +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_CAST5=y +CONFIG_CRYPTO_CAST6=y +CONFIG_CRYPTO_TEA=y +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_KHAZAD=y +CONFIG_CRYPTO_ANUBIS=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -1226,10 +1385,12 @@ CONFIG_DEBUG_LL=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 848e3ace9069..fa271bce8ff7 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -1,15 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc7 -# Tue Sep 19 00:30:42 2006 +# Linux kernel version: 2.6.20-rc1 +# Sat Dec 16 06:05:34 2006 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 @@ -29,18 +32,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -49,12 +56,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -72,7 +79,10 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -106,6 +116,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP32X is not set CONFIG_ARCH_IOP33X=y +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set @@ -139,17 +150,22 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # # CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_IWMMXT is not set CONFIG_XSCALE_PMU=y # # Bus support # CONFIG_PCI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # @@ -223,6 +239,7 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -244,13 +261,29 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -277,7 +310,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -336,6 +368,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -423,7 +456,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -443,6 +476,8 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -461,14 +496,16 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers @@ -481,26 +518,34 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -515,6 +560,7 @@ CONFIG_MD_RAID1=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_MIRROR is not set @@ -580,6 +626,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -588,6 +635,7 @@ CONFIG_E1000_NAPI=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -622,6 +670,7 @@ CONFIG_E1000_NAPI=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -693,10 +742,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -704,7 +749,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -769,6 +813,7 @@ CONFIG_I2C_IOP3XX=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -802,15 +847,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -819,6 +867,8 @@ CONFIG_HWMON=y # # Misc devices # +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # # LED devices @@ -837,7 +887,6 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -863,6 +912,11 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -900,6 +954,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -911,6 +966,7 @@ CONFIG_XFS_FS=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -939,8 +995,10 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -1019,6 +1077,11 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1027,8 +1090,11 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y @@ -1044,10 +1110,9 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y @@ -1067,10 +1132,6 @@ CONFIG_DEBUG_LL=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # # CONFIG_CRC_CCITT is not set @@ -1078,3 +1139,4 @@ CONFIG_DEBUG_LL=y # CONFIG_CRC32 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index bbd2dcf91e52..f8f9793b526f 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Sun Jul 9 15:28:50 2006 +# Linux kernel version: 2.6.20-rc1 +# Sat Dec 16 06:05:39 2006 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 @@ -28,17 +32,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -47,12 +56,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -70,7 +79,10 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -102,7 +114,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IXP4XX is not set CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_IXP23XX is not set @@ -143,24 +157,28 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # # CONFIG_ARM_THUMB is not set CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_IWMMXT is not set CONFIG_XSCALE_PMU=y # # Bus support # CONFIG_PCI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # Kernel Features @@ -228,6 +246,7 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -248,13 +267,29 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -281,7 +316,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -308,7 +342,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set @@ -340,6 +373,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -422,11 +456,12 @@ CONFIG_MTD_IXP2000=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -436,6 +471,12 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -501,8 +542,8 @@ CONFIG_NET_PCI=y # CONFIG_FORCEDETH is not set CONFIG_CS89x0=y # CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -532,6 +573,7 @@ CONFIG_ENP2611_MSF_NET=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -540,6 +582,7 @@ CONFIG_ENP2611_MSF_NET=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -555,7 +598,6 @@ CONFIG_ENP2611_MSF_NET=y # Wan interfaces # CONFIG_WAN=y -# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set CONFIG_HDLC=y CONFIG_HDLC_RAW=y @@ -571,6 +613,7 @@ CONFIG_HDLC_PPP=y # CONFIG_WANXL is not set # CONFIG_PC300 is not set # CONFIG_FARSYNC is not set +# CONFIG_DSCC4 is not set CONFIG_DLCI=y CONFIG_DLCI_COUNT=24 CONFIG_DLCI_MAX=8 @@ -592,6 +635,7 @@ CONFIG_DLCI_MAX=8 # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -673,10 +717,6 @@ CONFIG_IXP2000_WATCHDOG=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -684,7 +724,6 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -749,6 +788,7 @@ CONFIG_SENSORS_EEPROM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -782,15 +822,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -799,6 +842,8 @@ CONFIG_HWMON=y # # Misc devices # +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # # LED devices @@ -817,7 +862,6 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -829,6 +873,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -836,6 +881,11 @@ CONFIG_VIDEO_V4L2=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -875,6 +925,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -882,6 +933,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -910,8 +962,10 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -961,7 +1015,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -994,6 +1047,11 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1002,8 +1060,11 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y @@ -1019,10 +1080,9 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y @@ -1042,12 +1102,9 @@ CONFIG_DEBUG_LL=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -1055,3 +1112,4 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index 06deefaec1d2..27cf022dd807 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Sun Jul 9 14:13:35 2006 +# Linux kernel version: 2.6.20-rc1 +# Sat Dec 16 06:05:45 2006 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 @@ -28,17 +32,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -47,12 +56,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -70,7 +79,10 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -102,7 +114,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set CONFIG_ARCH_IXP23XX=y @@ -137,6 +151,8 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y CONFIG_IO_36=y # @@ -144,11 +160,15 @@ CONFIG_IO_36=y # # CONFIG_ARM_THUMB is not set CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_IWMMXT is not set # # Bus support # CONFIG_PCI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # @@ -222,6 +242,7 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -242,13 +263,29 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -275,7 +312,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -334,6 +370,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -418,12 +455,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -432,6 +470,7 @@ CONFIG_BLK_DEV_INITRD=y # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -455,7 +494,6 @@ CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set # CONFIG_IDEDMA_PCI_AUTO is not set @@ -469,6 +507,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT821X is not set @@ -477,6 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SL82C105 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set @@ -491,6 +531,8 @@ CONFIG_BLK_DEV_IDEDMA=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -509,14 +551,16 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers @@ -529,26 +573,34 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -649,6 +701,7 @@ CONFIG_E1000_NAPI=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -657,6 +710,7 @@ CONFIG_E1000_NAPI=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -672,7 +726,6 @@ CONFIG_E1000_NAPI=y # Wan interfaces # CONFIG_WAN=y -# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set CONFIG_HDLC=y CONFIG_HDLC_RAW=y @@ -688,6 +741,7 @@ CONFIG_HDLC_PPP=y # CONFIG_WANXL is not set # CONFIG_PC300 is not set # CONFIG_FARSYNC is not set +# CONFIG_DSCC4 is not set CONFIG_DLCI=y CONFIG_DLCI_COUNT=24 CONFIG_DLCI_MAX=8 @@ -710,6 +764,7 @@ CONFIG_DLCI_MAX=8 # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -795,10 +850,6 @@ CONFIG_WATCHDOG=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -806,7 +857,6 @@ CONFIG_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -870,6 +920,7 @@ CONFIG_SENSORS_EEPROM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -903,15 +954,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -920,6 +974,8 @@ CONFIG_HWMON=y # # Misc devices # +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # # LED devices @@ -938,7 +994,6 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -951,6 +1006,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -958,6 +1014,11 @@ CONFIG_VIDEO_V4L2=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -972,6 +1033,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1012,6 +1074,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1050,6 +1113,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -1067,19 +1131,21 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # # USB DSL modem support @@ -1113,6 +1179,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1120,6 +1187,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1150,8 +1218,10 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437 # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -1201,7 +1271,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1273,6 +1342,11 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1281,8 +1355,11 @@ CONFIG_NLS_CODEPAGE_437=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y @@ -1298,10 +1375,9 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y @@ -1321,12 +1397,9 @@ CONFIG_DEBUG_LL=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -1334,3 +1407,4 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index e146189ab54f..a3bf5833b87a 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Sun Jul 9 14:15:23 2006 +# Linux kernel version: 2.6.20-rc1 +# Sat Dec 16 06:05:51 2006 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y @@ -29,16 +33,21 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -47,12 +56,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -69,7 +78,10 @@ CONFIG_MODULES=y # # Block layer # +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -101,7 +113,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set @@ -125,7 +139,6 @@ CONFIG_MACH_LOGICPD_PXA270=y # CONFIG_PXA_SHARPSL is not set # CONFIG_MACH_TRIZEPS4 is not set CONFIG_PXA27x=y -CONFIG_IWMMXT=y # # Processor Type @@ -136,11 +149,15 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # # CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y # @@ -217,6 +234,7 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -237,13 +255,29 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -270,7 +304,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -329,6 +362,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -410,7 +444,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -447,6 +481,12 @@ CONFIG_BLK_DEV_IDEDISK=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -526,6 +566,7 @@ CONFIG_SMC91X=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -548,6 +589,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -600,17 +642,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -626,6 +663,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -634,11 +672,14 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # +# CONFIG_TIFM_CORE is not set # # LED devices @@ -657,7 +698,6 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -679,6 +719,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y # CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set # CONFIG_FB_VIRTUAL is not set # @@ -725,7 +766,6 @@ CONFIG_SND_VERBOSE_PROCFS=y # Generic devices # CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set @@ -741,6 +781,12 @@ CONFIG_SND_PXA2XX_AC97=y # Open Sound System # # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y + +# +# HID Devices +# +CONFIG_HID=y # # USB support @@ -777,10 +823,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -811,6 +859,7 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437 # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set @@ -860,7 +909,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -917,6 +965,11 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -925,8 +978,11 @@ CONFIG_NLS_ISO8859_1=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y @@ -942,10 +998,9 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y @@ -965,12 +1020,9 @@ CONFIG_DEBUG_LL=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -978,3 +1030,4 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index 0498ebd7d5de..650a248613e5 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Sun Jul 9 14:16:20 2006 +# Linux kernel version: 2.6.20-rc1 +# Sat Dec 16 06:05:18 2006 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 @@ -28,16 +32,21 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -46,12 +55,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -69,7 +78,10 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -101,7 +113,9 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set @@ -118,10 +132,6 @@ CONFIG_ARCH_AT91=y # # Atmel AT91 System-on-Chip # - -# -# Atmel AT91 Processors -# CONFIG_ARCH_AT91RM9200=y # CONFIG_ARCH_AT91SAM9260 is not set # CONFIG_ARCH_AT91SAM9261 is not set @@ -140,6 +150,10 @@ CONFIG_MACH_ONEARM=y # CONFIG_MACH_KAFA is not set # +# AT91 Board Options +# + +# # AT91 Feature Selections # CONFIG_AT91_PROGRAMMABLE_CLOCKS=y @@ -149,12 +163,14 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -251,6 +267,7 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -271,13 +288,29 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -304,7 +337,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -360,6 +392,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -438,11 +471,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -457,6 +491,12 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -541,6 +581,7 @@ CONFIG_ARM_AT91_ETHER=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -619,10 +660,6 @@ CONFIG_AT91RM9200_WATCHDOG=y # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set @@ -634,7 +671,6 @@ CONFIG_AT91RM9200_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -652,6 +688,7 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # +# CONFIG_I2C_AT91 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set @@ -681,6 +718,7 @@ CONFIG_I2C_CHARDEV=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -714,12 +752,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -728,6 +769,7 @@ CONFIG_HWMON=y # # Misc devices # +# CONFIG_TIFM_CORE is not set # # LED devices @@ -746,7 +788,6 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -759,6 +800,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -766,6 +808,11 @@ CONFIG_VIDEO_V4L2=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -780,6 +827,7 @@ CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -804,7 +852,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # @@ -842,6 +889,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -859,18 +907,20 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -897,6 +947,7 @@ CONFIG_USB_AT91=y # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set # # MMC/SD Card support @@ -904,7 +955,8 @@ CONFIG_USB_AT91=y CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -CONFIG_MMC_AT91RM9200=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_TIFM_SD is not set # # Real Time Clock @@ -919,10 +971,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -951,8 +1005,10 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -995,7 +1051,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1013,6 +1068,11 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1021,8 +1081,11 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y @@ -1038,10 +1101,9 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y @@ -1061,15 +1123,13 @@ CONFIG_DEBUG_LL=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index ab06a86e85d5..1b935fb94b83 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -10,7 +10,6 @@ obj-y := compat.o entry-armv.o entry-common.o irq.o \ process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \ time.o traps.o -obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o obj-$(CONFIG_FIQ) += fiq.o diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c deleted file mode 100644 index a11fb9a40c04..000000000000 --- a/arch/arm/kernel/apm.c +++ /dev/null @@ -1,672 +0,0 @@ -/* - * bios-less APM driver for ARM Linux - * Jamey Hicks <jamey@crl.dec.com> - * adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com) - * - * APM 1.2 Reference: - * Intel Corporation, Microsoft Corporation. Advanced Power Management - * (APM) BIOS Interface Specification, Revision 1.2, February 1996. - * - * [This document is available from Microsoft at: - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] - */ -#include <linux/module.h> -#include <linux/poll.h> -#include <linux/slab.h> -#include <linux/proc_fs.h> -#include <linux/miscdevice.h> -#include <linux/apm_bios.h> -#include <linux/capability.h> -#include <linux/sched.h> -#include <linux/pm.h> -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/init.h> -#include <linux/completion.h> -#include <linux/kthread.h> -#include <linux/delay.h> - -#include <asm/apm.h> /* apm_power_info */ -#include <asm/system.h> - -/* - * The apm_bios device is one of the misc char devices. - * This is its minor number. - */ -#define APM_MINOR_DEV 134 - -/* - * See Documentation/Config.help for the configuration options. - * - * Various options can be changed at boot time as follows: - * (We allow underscores for compatibility with the modules code) - * apm=on/off enable/disable APM - */ - -/* - * Maximum number of events stored - */ -#define APM_MAX_EVENTS 16 - -struct apm_queue { - unsigned int event_head; - unsigned int event_tail; - apm_event_t events[APM_MAX_EVENTS]; -}; - -/* - * The per-file APM data - */ -struct apm_user { - struct list_head list; - - unsigned int suser: 1; - unsigned int writer: 1; - unsigned int reader: 1; - - int suspend_result; - unsigned int suspend_state; -#define SUSPEND_NONE 0 /* no suspend pending */ -#define SUSPEND_PENDING 1 /* suspend pending read */ -#define SUSPEND_READ 2 /* suspend read, pending ack */ -#define SUSPEND_ACKED 3 /* suspend acked */ -#define SUSPEND_WAIT 4 /* waiting for suspend */ -#define SUSPEND_DONE 5 /* suspend completed */ - - struct apm_queue queue; -}; - -/* - * Local variables - */ -static int suspends_pending; -static int apm_disabled; -static struct task_struct *kapmd_tsk; - -static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); -static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); - -/* - * This is a list of everyone who has opened /dev/apm_bios - */ -static DECLARE_RWSEM(user_list_lock); -static LIST_HEAD(apm_user_list); - -/* - * kapmd info. kapmd provides us a process context to handle - * "APM" events within - specifically necessary if we're going - * to be suspending the system. - */ -static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait); -static DEFINE_SPINLOCK(kapmd_queue_lock); -static struct apm_queue kapmd_queue; - -static DEFINE_MUTEX(state_lock); - -static const char driver_version[] = "1.13"; /* no spaces */ - - - -/* - * Compatibility cruft until the IPAQ people move over to the new - * interface. - */ -static void __apm_get_power_status(struct apm_power_info *info) -{ -} - -/* - * This allows machines to provide their own "apm get power status" function. - */ -void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status; -EXPORT_SYMBOL(apm_get_power_status); - - -/* - * APM event queue management. - */ -static inline int queue_empty(struct apm_queue *q) -{ - return q->event_head == q->event_tail; -} - -static inline apm_event_t queue_get_event(struct apm_queue *q) -{ - q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; - return q->events[q->event_tail]; -} - -static void queue_add_event(struct apm_queue *q, apm_event_t event) -{ - q->event_head = (q->event_head + 1) % APM_MAX_EVENTS; - if (q->event_head == q->event_tail) { - static int notified; - - if (notified++ == 0) - printk(KERN_ERR "apm: an event queue overflowed\n"); - q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; - } - q->events[q->event_head] = event; -} - -static void queue_event(apm_event_t event) -{ - struct apm_user *as; - - down_read(&user_list_lock); - list_for_each_entry(as, &apm_user_list, list) { - if (as->reader) - queue_add_event(&as->queue, event); - } - up_read(&user_list_lock); - wake_up_interruptible(&apm_waitqueue); -} - -/* - * queue_suspend_event - queue an APM suspend event. - * - * Check that we're in a state where we can suspend. If not, - * return -EBUSY. Otherwise, queue an event to all "writer" - * users. If there are no "writer" users, return '1' to - * indicate that we can immediately suspend. - */ -static int queue_suspend_event(apm_event_t event, struct apm_user *sender) -{ - struct apm_user *as; - int ret = 1; - - mutex_lock(&state_lock); - down_read(&user_list_lock); - - /* - * If a thread is still processing, we can't suspend, so reject - * the request. - */ - list_for_each_entry(as, &apm_user_list, list) { - if (as != sender && as->reader && as->writer && as->suser && - as->suspend_state != SUSPEND_NONE) { - ret = -EBUSY; - goto out; - } - } - - list_for_each_entry(as, &apm_user_list, list) { - if (as != sender && as->reader && as->writer && as->suser) { - as->suspend_state = SUSPEND_PENDING; - suspends_pending++; - queue_add_event(&as->queue, event); - ret = 0; - } - } - out: - up_read(&user_list_lock); - mutex_unlock(&state_lock); - wake_up_interruptible(&apm_waitqueue); - return ret; -} - -static void apm_suspend(void) -{ - struct apm_user *as; - int err = pm_suspend(PM_SUSPEND_MEM); - - /* - * Anyone on the APM queues will think we're still suspended. - * Send a message so everyone knows we're now awake again. - */ - queue_event(APM_NORMAL_RESUME); - - /* - * Finally, wake up anyone who is sleeping on the suspend. - */ - mutex_lock(&state_lock); - down_read(&user_list_lock); - list_for_each_entry(as, &apm_user_list, list) { - if (as->suspend_state == SUSPEND_WAIT || - as->suspend_state == SUSPEND_ACKED) { - as->suspend_result = err; - as->suspend_state = SUSPEND_DONE; - } - } - up_read(&user_list_lock); - mutex_unlock(&state_lock); - - wake_up(&apm_suspend_waitqueue); -} - -static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) -{ - struct apm_user *as = fp->private_data; - apm_event_t event; - int i = count, ret = 0; - - if (count < sizeof(apm_event_t)) - return -EINVAL; - - if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK) - return -EAGAIN; - - wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue)); - - while ((i >= sizeof(event)) && !queue_empty(&as->queue)) { - event = queue_get_event(&as->queue); - - ret = -EFAULT; - if (copy_to_user(buf, &event, sizeof(event))) - break; - - mutex_lock(&state_lock); - if (as->suspend_state == SUSPEND_PENDING && - (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)) - as->suspend_state = SUSPEND_READ; - mutex_unlock(&state_lock); - - buf += sizeof(event); - i -= sizeof(event); - } - - if (i < count) - ret = count - i; - - return ret; -} - -static unsigned int apm_poll(struct file *fp, poll_table * wait) -{ - struct apm_user *as = fp->private_data; - - poll_wait(fp, &apm_waitqueue, wait); - return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM; -} - -/* - * apm_ioctl - handle APM ioctl - * - * APM_IOC_SUSPEND - * This IOCTL is overloaded, and performs two functions. It is used to: - * - initiate a suspend - * - acknowledge a suspend read from /dev/apm_bios. - * Only when everyone who has opened /dev/apm_bios with write permission - * has acknowledge does the actual suspend happen. - */ -static int -apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) -{ - struct apm_user *as = filp->private_data; - unsigned long flags; - int err = -EINVAL; - - if (!as->suser || !as->writer) - return -EPERM; - - switch (cmd) { - case APM_IOC_SUSPEND: - mutex_lock(&state_lock); - - as->suspend_result = -EINTR; - - if (as->suspend_state == SUSPEND_READ) { - int pending; - - /* - * If we read a suspend command from /dev/apm_bios, - * then the corresponding APM_IOC_SUSPEND ioctl is - * interpreted as an acknowledge. - */ - as->suspend_state = SUSPEND_ACKED; - suspends_pending--; - pending = suspends_pending == 0; - mutex_unlock(&state_lock); - - /* - * If there are no further acknowledges required, - * suspend the system. - */ - if (pending) - apm_suspend(); - - /* - * Wait for the suspend/resume to complete. If there - * are pending acknowledges, we wait here for them. - * - * Note: we need to ensure that the PM subsystem does - * not kick us out of the wait when it suspends the - * threads. - */ - flags = current->flags; - current->flags |= PF_NOFREEZE; - - wait_event(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); - } else { - as->suspend_state = SUSPEND_WAIT; - mutex_unlock(&state_lock); - - /* - * Otherwise it is a request to suspend the system. - * Queue an event for all readers, and expect an - * acknowledge from all writers who haven't already - * acknowledged. - */ - err = queue_suspend_event(APM_USER_SUSPEND, as); - if (err < 0) { - /* - * Avoid taking the lock here - this - * should be fine. - */ - as->suspend_state = SUSPEND_NONE; - break; - } - - if (err > 0) - apm_suspend(); - - /* - * Wait for the suspend/resume to complete. If there - * are pending acknowledges, we wait here for them. - * - * Note: we need to ensure that the PM subsystem does - * not kick us out of the wait when it suspends the - * threads. - */ - flags = current->flags; - current->flags |= PF_NOFREEZE; - - wait_event_interruptible(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); - } - - current->flags = flags; - - mutex_lock(&state_lock); - err = as->suspend_result; - as->suspend_state = SUSPEND_NONE; - mutex_unlock(&state_lock); - break; - } - - return err; -} - -static int apm_release(struct inode * inode, struct file * filp) -{ - struct apm_user *as = filp->private_data; - int pending = 0; - - filp->private_data = NULL; - - down_write(&user_list_lock); - list_del(&as->list); - up_write(&user_list_lock); - - /* - * We are now unhooked from the chain. As far as new - * events are concerned, we no longer exist. However, we - * need to balance suspends_pending, which means the - * possibility of sleeping. - */ - mutex_lock(&state_lock); - if (as->suspend_state != SUSPEND_NONE) { - suspends_pending -= 1; - pending = suspends_pending == 0; - } - mutex_unlock(&state_lock); - if (pending) - apm_suspend(); - - kfree(as); - return 0; -} - -static int apm_open(struct inode * inode, struct file * filp) -{ - struct apm_user *as; - - as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL); - if (as) { - /* - * XXX - this is a tiny bit broken, when we consider BSD - * process accounting. If the device is opened by root, we - * instantly flag that we used superuser privs. Who knows, - * we might close the device immediately without doing a - * privileged operation -- cevans - */ - as->suser = capable(CAP_SYS_ADMIN); - as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; - as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; - - down_write(&user_list_lock); - list_add(&as->list, &apm_user_list); - up_write(&user_list_lock); - - filp->private_data = as; - } - - return as ? 0 : -ENOMEM; -} - -static struct file_operations apm_bios_fops = { - .owner = THIS_MODULE, - .read = apm_read, - .poll = apm_poll, - .ioctl = apm_ioctl, - .open = apm_open, - .release = apm_release, -}; - -static struct miscdevice apm_device = { - .minor = APM_MINOR_DEV, - .name = "apm_bios", - .fops = &apm_bios_fops -}; - - -#ifdef CONFIG_PROC_FS -/* - * Arguments, with symbols from linux/apm_bios.h. - * - * 0) Linux driver version (this will change if format changes) - * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. - * 2) APM flags from APM Installation Check (0x00): - * bit 0: APM_16_BIT_SUPPORT - * bit 1: APM_32_BIT_SUPPORT - * bit 2: APM_IDLE_SLOWS_CLOCK - * bit 3: APM_BIOS_DISABLED - * bit 4: APM_BIOS_DISENGAGED - * 3) AC line status - * 0x00: Off-line - * 0x01: On-line - * 0x02: On backup power (BIOS >= 1.1 only) - * 0xff: Unknown - * 4) Battery status - * 0x00: High - * 0x01: Low - * 0x02: Critical - * 0x03: Charging - * 0x04: Selected battery not present (BIOS >= 1.2 only) - * 0xff: Unknown - * 5) Battery flag - * bit 0: High - * bit 1: Low - * bit 2: Critical - * bit 3: Charging - * bit 7: No system battery - * 0xff: Unknown - * 6) Remaining battery life (percentage of charge): - * 0-100: valid - * -1: Unknown - * 7) Remaining battery life (time units): - * Number of remaining minutes or seconds - * -1: Unknown - * 8) min = minutes; sec = seconds - */ -static int apm_get_info(char *buf, char **start, off_t fpos, int length) -{ - struct apm_power_info info; - char *units; - int ret; - - info.ac_line_status = 0xff; - info.battery_status = 0xff; - info.battery_flag = 0xff; - info.battery_life = -1; - info.time = -1; - info.units = -1; - - if (apm_get_power_status) - apm_get_power_status(&info); - - switch (info.units) { - default: units = "?"; break; - case 0: units = "min"; break; - case 1: units = "sec"; break; - } - - ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", - driver_version, APM_32_BIT_SUPPORT, - info.ac_line_status, info.battery_status, - info.battery_flag, info.battery_life, - info.time, units); - - return ret; -} -#endif - -static int kapmd(void *arg) -{ - do { - apm_event_t event; - int ret; - - wait_event_interruptible(kapmd_wait, - !queue_empty(&kapmd_queue) || kthread_should_stop()); - - if (kthread_should_stop()) - break; - - spin_lock_irq(&kapmd_queue_lock); - event = 0; - if (!queue_empty(&kapmd_queue)) - event = queue_get_event(&kapmd_queue); - spin_unlock_irq(&kapmd_queue_lock); - - switch (event) { - case 0: - break; - - case APM_LOW_BATTERY: - case APM_POWER_STATUS_CHANGE: - queue_event(event); - break; - - case APM_USER_SUSPEND: - case APM_SYS_SUSPEND: - ret = queue_suspend_event(event, NULL); - if (ret < 0) { - /* - * We were busy. Try again in 50ms. - */ - queue_add_event(&kapmd_queue, event); - msleep(50); - } - if (ret > 0) - apm_suspend(); - break; - - case APM_CRITICAL_SUSPEND: - apm_suspend(); - break; - } - } while (1); - - return 0; -} - -static int __init apm_init(void) -{ - int ret; - - if (apm_disabled) { - printk(KERN_NOTICE "apm: disabled on user request.\n"); - return -ENODEV; - } - - kapmd_tsk = kthread_create(kapmd, NULL, "kapmd"); - if (IS_ERR(kapmd_tsk)) { - ret = PTR_ERR(kapmd_tsk); - kapmd_tsk = NULL; - return ret; - } - kapmd_tsk->flags |= PF_NOFREEZE; - wake_up_process(kapmd_tsk); - -#ifdef CONFIG_PROC_FS - create_proc_info_entry("apm", 0, NULL, apm_get_info); -#endif - - ret = misc_register(&apm_device); - if (ret != 0) { - remove_proc_entry("apm", NULL); - kthread_stop(kapmd_tsk); - } - - return ret; -} - -static void __exit apm_exit(void) -{ - misc_deregister(&apm_device); - remove_proc_entry("apm", NULL); - - kthread_stop(kapmd_tsk); -} - -module_init(apm_init); -module_exit(apm_exit); - -MODULE_AUTHOR("Stephen Rothwell"); -MODULE_DESCRIPTION("Advanced Power Management"); -MODULE_LICENSE("GPL"); - -#ifndef MODULE -static int __init apm_setup(char *str) -{ - while ((str != NULL) && (*str != '\0')) { - if (strncmp(str, "off", 3) == 0) - apm_disabled = 1; - if (strncmp(str, "on", 2) == 0) - apm_disabled = 0; - str = strchr(str, ','); - if (str != NULL) - str += strspn(str, ", \t"); - } - return 1; -} - -__setup("apm=", apm_setup); -#endif - -/** - * apm_queue_event - queue an APM event for kapmd - * @event: APM event - * - * Queue an APM event for kapmd to process and ultimately take the - * appropriate action. Only a subset of events are handled: - * %APM_LOW_BATTERY - * %APM_POWER_STATUS_CHANGE - * %APM_USER_SUSPEND - * %APM_SYS_SUSPEND - * %APM_CRITICAL_SUSPEND - */ -void apm_queue_event(apm_event_t event) -{ - unsigned long flags; - - spin_lock_irqsave(&kapmd_queue_lock, flags); - queue_add_event(&kapmd_queue, event); - spin_unlock_irqrestore(&kapmd_queue_lock, flags); - - wake_up_interruptible(&kapmd_wait); -} -EXPORT_SYMBOL(apm_queue_event); diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 3173924a9b60..f7598cbc7ec5 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -110,7 +110,7 @@ CALL(sys_ni_syscall) /* was sys_profil */ CALL(sys_statfs) /* 100 */ CALL(sys_fstatfs) - CALL(sys_ni_syscall) + CALL(sys_ni_syscall) /* sys_ioperm */ CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall))) CALL(sys_syslog) CALL(sys_setitimer) @@ -132,7 +132,7 @@ /* 120 */ CALL(sys_clone_wrapper) CALL(sys_setdomainname) CALL(sys_newuname) - CALL(sys_ni_syscall) + CALL(sys_ni_syscall) /* modify_ldt */ CALL(sys_adjtimex) /* 125 */ CALL(sys_mprotect) CALL(sys_sigprocmask) @@ -146,7 +146,7 @@ CALL(sys_bdflush) /* 135 */ CALL(sys_sysfs) CALL(sys_personality) - CALL(sys_ni_syscall) /* CALL(_sys_afs_syscall) */ + CALL(sys_ni_syscall) /* reserved for afs_syscall */ CALL(sys_setfsuid16) CALL(sys_setfsgid16) /* 140 */ CALL(sys_llseek) @@ -175,7 +175,7 @@ CALL(sys_arm_mremap) CALL(sys_setresuid16) /* 165 */ CALL(sys_getresuid16) - CALL(sys_ni_syscall) + CALL(sys_ni_syscall) /* vm86 */ CALL(sys_ni_syscall) /* was sys_query_module */ CALL(sys_poll) CALL(sys_nfsservctl) @@ -197,8 +197,8 @@ /* 185 */ CALL(sys_capset) CALL(sys_sigaltstack_wrapper) CALL(sys_sendfile) - CALL(sys_ni_syscall) - CALL(sys_ni_syscall) + CALL(sys_ni_syscall) /* getpmsg */ + CALL(sys_ni_syscall) /* putpmsg */ /* 190 */ CALL(sys_vfork_wrapper) CALL(sys_getrlimit) CALL(sys_mmap2) @@ -331,6 +331,31 @@ CALL(sys_mbind) /* 320 */ CALL(sys_get_mempolicy) CALL(sys_set_mempolicy) + CALL(sys_openat) + CALL(sys_mkdirat) + CALL(sys_mknodat) +/* 325 */ CALL(sys_fchownat) + CALL(sys_futimesat) + CALL(sys_fstatat64) + CALL(sys_unlinkat) + CALL(sys_renameat) +/* 330 */ CALL(sys_linkat) + CALL(sys_symlinkat) + CALL(sys_readlinkat) + CALL(sys_fchmodat) + CALL(sys_faccessat) +/* 335 */ CALL(sys_ni_syscall) /* eventually pselect6 */ + CALL(sys_ni_syscall) /* eventually ppoll */ + CALL(sys_unshare) + CALL(sys_set_robust_list) + CALL(sys_get_robust_list) +/* 340 */ CALL(sys_splice) + CALL(sys_arm_sync_file_range) + CALL(sys_tee) + CALL(sys_vmsplice) + CALL(sys_move_pages) +/* 345 */ CALL(sys_getcpu) + CALL(sys_ni_syscall) /* eventually epoll_pwait */ #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index a786f769035d..71257e3d513f 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -353,7 +353,7 @@ int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num) } if (c_id(&excd) == 0x80) { /* loader */ if (!ec->loader) { - ec->loader = (loader_t)kmalloc(c_len(&excd), + ec->loader = kmalloc(c_len(&excd), GFP_KERNEL); if (ec->loader) ecard_readbytes(ec->loader, ec, diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 2db42b18f53f..8517c3c3eb33 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -436,7 +436,7 @@ __und_usr: usr_entry tst r3, #PSR_T_BIT @ Thumb mode? - bne fpundefinstr @ ignore FP + bne __und_usr_unknown @ ignore FP sub r4, r2, #4 @ @@ -448,7 +448,7 @@ __und_usr: @ 1: ldrt r0, [r4] adr r9, ret_from_exception - adr lr, fpundefinstr + adr lr, __und_usr_unknown @ @ fallthrough to call_fpe @ @@ -476,7 +476,9 @@ __und_usr: * Emulators may wish to make use of the following registers: * r0 = instruction opcode. * r2 = PC+4 + * r9 = normal "successful" return address * r10 = this threads thread_info structure. + * lr = unrecognised instruction return address */ call_fpe: tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 @@ -545,10 +547,12 @@ do_fpe: .data ENTRY(fp_enter) - .word fpundefinstr + .word no_fp .text -fpundefinstr: +no_fp: mov pc, lr + +__und_usr_unknown: mov r0, sp adr lr, ret_from_exception b do_undefinstr diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index bda0748ffb00..cf495a3084b3 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -22,30 +22,35 @@ #include <asm/thread_info.h> #include <asm/system.h> -#define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET) +#if (PHYS_OFFSET & 0x001fffff) +#error "PHYS_OFFSET must be at an even 2MiB boundary!" +#endif + +#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) +#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET) /* * swapper_pg_dir is the virtual address of the initial page table. - * We place the page tables 16K below KERNEL_RAM_ADDR. Therefore, we must - * make sure that KERNEL_RAM_ADDR is correctly set. Currently, we expect + * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must + * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect * the least significant 16 bits to be 0x8000, but we could probably - * relax this restriction to KERNEL_RAM_ADDR >= PAGE_OFFSET + 0x4000. + * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000. */ -#if (KERNEL_RAM_ADDR & 0xffff) != 0x8000 -#error KERNEL_RAM_ADDR must start at 0xXXXX8000 +#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000 +#error KERNEL_RAM_VADDR must start at 0xXXXX8000 #endif .globl swapper_pg_dir - .equ swapper_pg_dir, KERNEL_RAM_ADDR - 0x4000 + .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000 .macro pgtbl, rd - ldr \rd, =(__virt_to_phys(KERNEL_RAM_ADDR - 0x4000)) + ldr \rd, =(KERNEL_RAM_PADDR - 0x4000) .endm #ifdef CONFIG_XIP_KERNEL #define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) #else -#define TEXTADDR KERNEL_RAM_ADDR +#define TEXTADDR KERNEL_RAM_VADDR #endif /* @@ -250,7 +255,8 @@ __create_page_tables: * Then map first 1MB of ram in case it contains our boot params. */ add r0, r4, #PAGE_OFFSET >> 18 - orr r6, r7, #PHYS_OFFSET + orr r6, r7, #(PHYS_OFFSET & 0xff000000) + orr r6, r6, #(PHYS_OFFSET & 0x00e00000) str r6, [r0] #ifdef CONFIG_XIP_KERNEL diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 238dd9b6db84..bbab134cd82d 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -354,9 +354,6 @@ static void __init setup_processor(void) #ifndef CONFIG_ARM_THUMB elf_hwcap &= ~HWCAP_THUMB; #endif -#ifndef CONFIG_VFP - elf_hwcap &= ~HWCAP_VFP; -#endif cpu_proc_init(); } @@ -858,6 +855,7 @@ static const char *hwcap_str[] = { "edsp", "java", "iwmmxt", + "crunch", NULL }; diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 00c18d35913c..3d4fcbc16276 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -328,3 +328,16 @@ asmlinkage long sys_arm_fadvise64_64(int fd, int advice, { return sys_fadvise64_64(fd, offset, len, advice); } + +/* + * Yet more syscall fsckage - we can't fit sys_sync_file_range's + * arguments into the available registers with EABI. So, let's + * create an ARM specific syscall for this which has _sane_ + * arguments. (This incidentally also has an ABI-independent + * argument layout.) + */ +asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, + loff_t offset, loff_t nbytes) +{ + return sys_sync_file_range(fd, offset, nbytes, flags); +} diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 6ff5e3ff6cb5..3c8cdcfe8d4a 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -29,6 +29,8 @@ #include <linux/timer.h> #include <linux/irq.h> +#include <linux/mc146818rtc.h> + #include <asm/leds.h> #include <asm/thread_info.h> #include <asm/mach/time.h> @@ -85,6 +87,17 @@ unsigned long long __attribute__((weak)) sched_clock(void) return (unsigned long long)jiffies * (1000000000 / HZ); } +/* + * An implementation of printk_clock() independent from + * sched_clock(). This avoids non-bootable kernels when + * printk_clock is enabled. + */ +unsigned long long printk_clock(void) +{ + return (unsigned long long)(jiffies - INITIAL_JIFFIES) * + (1000000000 / HZ); +} + static unsigned long next_rtc_update; /* diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 042a12982e98..908915675edc 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -27,6 +27,7 @@ #include <asm/uaccess.h> #include <asm/unistd.h> #include <asm/traps.h> +#include <asm/io.h> #include "ptrace.h" #include "signal.h" diff --git a/arch/arm/mach-at91rm9200/at91rm9200_devices.c b/arch/arm/mach-at91rm9200/at91rm9200_devices.c index 4641b99db0ee..57fac7203fe4 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200_devices.c +++ b/arch/arm/mach-at91rm9200/at91rm9200_devices.c @@ -272,7 +272,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */ /* nWAIT is _not_ a default setting */ - at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */ + at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */ cf_data = *data; platform_device_register(&at91rm9200_cf_device); diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91rm9200/at91sam9260.c index 203f073a53e6..b14871adc300 100644 --- a/arch/arm/mach-at91rm9200/at91sam9260.c +++ b/arch/arm/mach-at91rm9200/at91sam9260.c @@ -16,6 +16,7 @@ #include <asm/mach/map.h> #include <asm/arch/at91sam9260.h> #include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> #include "generic.h" #include "clock.h" @@ -212,7 +213,7 @@ static struct at91_gpio_bank at91sam9260_gpio[] = { static void at91sam9260_reset(void) { -#warning "Implement CPU reset" + at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } diff --git a/arch/arm/mach-at91rm9200/at91sam9260_devices.c b/arch/arm/mach-at91rm9200/at91sam9260_devices.c index a6c596dc4516..f42d3a40ec3c 100644 --- a/arch/arm/mach-at91rm9200/at91sam9260_devices.c +++ b/arch/arm/mach-at91rm9200/at91sam9260_devices.c @@ -18,6 +18,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/at91sam9260.h> #include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9260_matrix.h> #include "generic.h" diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91rm9200/at91sam9261.c index 5a82f35da2e9..d242bb885c6d 100644 --- a/arch/arm/mach-at91rm9200/at91sam9261.c +++ b/arch/arm/mach-at91rm9200/at91sam9261.c @@ -16,6 +16,7 @@ #include <asm/mach/map.h> #include <asm/arch/at91sam9261.h> #include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> #include "generic.h" #include "clock.h" @@ -207,7 +208,7 @@ static struct at91_gpio_bank at91sam9261_gpio[] = { static void at91sam9261_reset(void) { -#warning "Implement CPU reset" + at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91rm9200/board-sam9260ek.c index ffca9bdec37b..da5d58ac870b 100644 --- a/arch/arm/mach-at91rm9200/board-sam9260ek.c +++ b/arch/arm/mach-at91rm9200/board-sam9260ek.c @@ -119,6 +119,7 @@ static struct spi_board_info ek_spi_devices[] = { * MACB Ethernet device */ static struct __initdata eth_platform_data ek_macb_data = { + .phy_irq_pin = AT91_PIN_PA7, .is_rmii = 1, }; diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 3f188508c391..af22659c8a28 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/hardware.h> #include <asm/arch/at91_pio.h> -#include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> #include "generic.h" @@ -224,17 +223,17 @@ static u32 backups[MAX_GPIO_BANKS]; static int gpio_irq_set_wake(unsigned pin, unsigned state) { unsigned mask = pin_to_mask(pin); + unsigned bank = (pin - PIN_BASE) / 32; - pin -= PIN_BASE; - pin /= 32; - - if (unlikely(pin >= MAX_GPIO_BANKS)) + if (unlikely(bank >= MAX_GPIO_BANKS)) return -EINVAL; if (state) - wakeups[pin] |= mask; + wakeups[bank] |= mask; else - wakeups[pin] &= ~mask; + wakeups[bank] &= ~mask; + + set_irq_wake(gpio[bank].id, state); return 0; } @@ -246,29 +245,15 @@ void at91_gpio_suspend(void) for (i = 0; i < gpio_banks; i++) { u32 pio = gpio[i].offset; - /* - * Note: drivers should have disabled GPIO interrupts that - * aren't supposed to be wakeup sources. - * But that is not much good on ARM..... disable_irq() does - * not update the hardware immediately, so the hardware mask - * (IMR) has the wrong value (not current, too much is - * permitted). - * - * Our workaround is to disable all non-wakeup IRQs ... - * which is exactly what correct drivers asked for in the - * first place! - */ backups[i] = at91_sys_read(pio + PIO_IMR); at91_sys_write(pio + PIO_IDR, backups[i]); at91_sys_write(pio + PIO_IER, wakeups[i]); - if (!wakeups[i]) { - disable_irq_wake(gpio[i].id); - at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id); - } else { - enable_irq_wake(gpio[i].id); + if (!wakeups[i]) + clk_disable(gpio[i].clock); + else { #ifdef CONFIG_PM_DEBUG - printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]); + printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]); #endif } } @@ -281,9 +266,11 @@ void at91_gpio_resume(void) for (i = 0; i < gpio_banks; i++) { u32 pio = gpio[i].offset; + if (!wakeups[i]) + clk_enable(gpio[i].clock); + at91_sys_write(pio + PIO_IDR, wakeups[i]); at91_sys_write(pio + PIO_IER, backups[i]); - at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id); } } diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index d649b39711d4..6b26346191c0 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -477,4 +477,8 @@ void __init ep93xx_init_devices(void) platform_device_register(&ep93xx_rtc_device); platform_device_register(&ep93xx_ohci_device); + +#ifdef CONFIG_CRUNCH + elf_hwcap |= HWCAP_CRUNCH; +#endif } diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 0b27d79f2efd..02272aa36e90 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,6 +9,8 @@ obj-y += irq.o time.o dma.o generic.o +obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o + # Specific board support obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c new file mode 100644 index 000000000000..4f66e90db74f --- /dev/null +++ b/arch/arm/mach-imx/cpufreq.c @@ -0,0 +1,299 @@ +/* + * cpu.c: clock scaling for the iMX + * + * Copyright (C) 2000 2001, The Delft University of Technology + * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> + * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com> + * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> + * + * Based on SA1100 version written by: + * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version + * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/*#define DEBUG*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <asm/system.h> + +#include <asm/hardware.h> + +#include "generic.h" + +#ifndef __val2mfld +#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask)) +#endif +#ifndef __mfld2val +#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1))) +#endif + +#define CR_920T_CLOCK_MODE 0xC0000000 +#define CR_920T_FASTBUS_MODE 0x00000000 +#define CR_920T_ASYNC_MODE 0xC0000000 + +static u32 mpctl0_at_boot; + +static void imx_set_async_mode(void) +{ + adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE); +} + +static void imx_set_fastbus_mode(void) +{ + adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE); +} + +static void imx_set_mpctl0(u32 mpctl0) +{ + unsigned long flags; + + if (mpctl0 == 0) { + local_irq_save(flags); + CSCR &= ~CSCR_MPEN; + local_irq_restore(flags); + return; + } + + local_irq_save(flags); + MPCTL0 = mpctl0; + CSCR |= CSCR_MPEN; + local_irq_restore(flags); +} + +/** + * imx_compute_mpctl - compute new PLL parameters + * @new_mpctl: pointer to location assigned by new PLL control register value + * @cur_mpctl: current PLL control register parameters + * @freq: required frequency in Hz + * @relation: is one of %CPUFREQ_RELATION_L (supremum) + * and %CPUFREQ_RELATION_H (infimum) + */ +long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, unsigned long freq, int relation) +{ + u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); + u32 mfi; + u32 mfn; + u32 mfd; + u32 pd; + unsigned long long ll; + long l; + long quot; + + /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */ + /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */ + + if (cur_mpctl) { + mfd = ((cur_mpctl >> 16) & 0x3ff) + 1; + pd = ((cur_mpctl >> 26) & 0xf) + 1; + } else { + pd=2; mfd=313; + } + + /* pd=2; mfd=313; mfi=8; mfn=183; */ + /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */ + + quot = (f_ref + (1 << 9)) >> 10; + l = (freq * pd + quot) / (2 * quot); + mfi = l >> 10; + mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10; + + mfd -= 1; + pd -= 1; + + *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16) + | ((pd & 0xf) << 26); + + ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) ); + quot = (pd+1) * (1<<16); + ll += quot / 2; + do_div(ll, quot); + freq = ll; + + pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n", + pd, mfd, mfi, mfn, freq); + + return freq; +} + + +static int imx_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); + + return 0; +} + +static unsigned int imx_get_speed(unsigned int cpu) +{ + unsigned int freq; + unsigned int cr; + unsigned int cscr; + unsigned int bclk_div; + + if (cpu) + return 0; + + cscr = CSCR; + bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1; + cr = get_cr(); + + if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) { + freq = imx_get_system_clk(); + freq = (freq + bclk_div/2) / bclk_div; + } else { + freq = imx_get_mcu_clk(); + if (cscr & CSCR_MPU_PRESC) + freq /= 2; + } + + freq = (freq + 500) / 1000; + + return freq; +} + +static int imx_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + u32 mpctl0 = 0; + u32 cscr; + unsigned long flags; + long freq; + long sysclk; + unsigned int bclk_div = 1; + + /* + * Some governors do not respects CPU and policy lower limits + * which leads to bad things (division by zero etc), ensure + * that such things do not happen. + */ + if(target_freq < policy->cpuinfo.min_freq) + target_freq = policy->cpuinfo.min_freq; + + if(target_freq < policy->min) + target_freq = policy->min; + + freq = target_freq * 1000; + + pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n", + freq, mpctl0_at_boot); + + sysclk = imx_get_system_clk(); + + if (freq > sysclk + 1000000) { + freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, freq, relation); + if (freq < 0) { + printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq); + return -EINVAL; + } + } else { + if(freq + 1000 < sysclk) { + if (relation == CPUFREQ_RELATION_L) + bclk_div = (sysclk - 1000) / freq; + else + bclk_div = (sysclk + freq + 1000) / freq; + + if(bclk_div > 16) + bclk_div = 16; + } + freq = (sysclk + bclk_div / 2) / bclk_div; + } + + freqs.old = imx_get_speed(0); + freqs.new = (freq + 500) / 1000; + freqs.cpu = 0; + freqs.flags = 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + local_irq_save(flags); + + imx_set_fastbus_mode(); + + imx_set_mpctl0(mpctl0); + + cscr = CSCR; + cscr &= ~CSCR_BCLK_DIV; + cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1); + CSCR = cscr; + + if(mpctl0) { + CSCR |= CSCR_MPLL_RESTART; + + /* Wait until MPLL is stablized */ + while( CSCR & CSCR_MPLL_RESTART ); + + imx_set_async_mode(); + } + + local_irq_restore(flags); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n", + freq, mpctl0? "MPLL": "SPLL"); + + return 0; +} + +static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + printk(KERN_INFO "i.MX cpu freq change driver v1.0\n"); + + if (policy->cpu != 0) + return -EINVAL; + + policy->cur = policy->min = policy->max = imx_get_speed(0); + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.min_freq = 8000; + policy->cpuinfo.max_freq = 200000; + /* Manual states, that PLL stabilizes in two CLK32 periods */ + policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32; + return 0; +} + +static struct cpufreq_driver imx_driver = { + .flags = CPUFREQ_STICKY, + .verify = imx_verify_speed, + .target = imx_set_target, + .get = imx_get_speed, + .init = imx_cpufreq_driver_init, + .name = "imx", +}; + +static int __init imx_cpufreq_init(void) +{ + + mpctl0_at_boot = 0; + + if((CSCR & CSCR_MPEN) && + ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE)) + mpctl0_at_boot = MPCTL0; + + return cpufreq_register_driver(&imx_driver); +} + +arch_initcall(imx_cpufreq_init); + diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c index fbf9f88e46ea..e79a1b62600f 100644 --- a/arch/arm/mach-iop13xx/io.c +++ b/arch/arm/mach-iop13xx/io.c @@ -21,6 +21,25 @@ #include <asm/hardware.h> #include <asm/io.h> +void * __iomem __iop13xx_io(unsigned long io_addr) +{ + void __iomem * io_virt; + + switch (io_addr) { + case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA: + io_virt = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(io_addr); + break; + case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA: + io_virt = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(io_addr); + break; + default: + BUG(); + } + + return io_virt; +} +EXPORT_SYMBOL(__iop13xx_io); + void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size, unsigned long flags) { diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index ee595786cd22..2a1bbfe9896f 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -88,11 +88,11 @@ static struct sys_timer iq81340mc_timer = { MACHINE_START(IQ81340MC, "Intel IQ81340MC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ - .phys_io = PHYS_IO, - .io_pg_offst = IO_PG_OFFSET, + .phys_io = IOP13XX_PMMR_PHYS_MEM_BASE, + .io_pg_offst = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc, + .boot_params = 0x00000100, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, .timer = &iq81340mc_timer, - .boot_params = BOOT_PARAM_OFFSET, .init_machine = iq81340mc_init, MACHINE_END diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index 6677e14b61bf..5ad2b62c9bfd 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -90,11 +90,11 @@ static struct sys_timer iq81340sc_timer = { MACHINE_START(IQ81340SC, "Intel IQ81340SC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ - .phys_io = PHYS_IO, - .io_pg_offst = IO_PG_OFFSET, + .phys_io = IOP13XX_PMMR_PHYS_MEM_BASE, + .io_pg_offst = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc, + .boot_params = 0x00000100, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, .timer = &iq81340sc_timer, - .boot_params = BOOT_PARAM_OFFSET, .init_machine = iq81340sc_init, MACHINE_END diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c index c4d9c8c5579c..dbbc07c38b14 100644 --- a/arch/arm/mach-iop13xx/irq.c +++ b/arch/arm/mach-iop13xx/irq.c @@ -222,25 +222,29 @@ iop13xx_irq_unmask3(unsigned int irq) iop13xx_cp6_restore(cp_flags); } -static struct irqchip iop13xx_irqchip0 = { +static struct irq_chip iop13xx_irqchip1 = { + .name = "IOP13xx-1", .ack = iop13xx_irq_mask0, .mask = iop13xx_irq_mask0, .unmask = iop13xx_irq_unmask0, }; -static struct irqchip iop13xx_irqchip1 = { +static struct irq_chip iop13xx_irqchip2 = { + .name = "IOP13xx-2", .ack = iop13xx_irq_mask1, .mask = iop13xx_irq_mask1, .unmask = iop13xx_irq_unmask1, }; -static struct irqchip iop13xx_irqchip2 = { +static struct irq_chip iop13xx_irqchip3 = { + .name = "IOP13xx-3", .ack = iop13xx_irq_mask2, .mask = iop13xx_irq_mask2, .unmask = iop13xx_irq_unmask2, }; -static struct irqchip iop13xx_irqchip3 = { +static struct irq_chip iop13xx_irqchip4 = { + .name = "IOP13xx-4", .ack = iop13xx_irq_mask3, .mask = iop13xx_irq_mask3, .unmask = iop13xx_irq_unmask3, @@ -270,15 +274,15 @@ void __init iop13xx_init_irq(void) for(i = 0; i < NR_IOP13XX_IRQS; i++) { if (i < 32) - set_irq_chip(i, &iop13xx_irqchip0); - else if (i < 64) set_irq_chip(i, &iop13xx_irqchip1); - else if (i < 96) + else if (i < 64) set_irq_chip(i, &iop13xx_irqchip2); - else + else if (i < 96) set_irq_chip(i, &iop13xx_irqchip3); + else + set_irq_chip(i, &iop13xx_irqchip4); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 3756d2ccb1a7..5fbeb28d04bb 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -337,7 +337,7 @@ void __init iop13xx_platform_init(void) #ifdef CONFIG_MTD_PHYSMAP iq8134x_flash_resource.end = iq8134x_flash_resource.start + - iq8134x_probe_flash_size(); + iq8134x_probe_flash_size() - 1; if (iq8134x_flash_resource.end > iq8134x_flash_resource.start) iop13xx_devices[plat_idx++] = &iq8134x_flash; else diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 0993336c0b55..5773b55ef4a6 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -19,6 +19,8 @@ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clocksource.h> #include <asm/hardware.h> #include <asm/io.h> @@ -26,15 +28,6 @@ #include <asm/arch/netx-regs.h> /* - * Returns number of us since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -static unsigned long netx_gettimeoffset(void) -{ - return readl(NETX_GPIO_COUNTER_CURRENT(0)) / 100; -} - -/* * IRQ handler for the timer */ static irqreturn_t @@ -43,6 +36,7 @@ netx_timer_interrupt(int irq, void *dev_id) write_seqlock(&xtime_lock); timer_tick(); + write_sequnlock(&xtime_lock); /* acknowledge interrupt */ @@ -51,13 +45,26 @@ netx_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } - static struct irqaction netx_timer_irq = { .name = "NetX Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER, .handler = netx_timer_interrupt, }; +cycle_t netx_get_cycles(void) +{ + return readl(NETX_GPIO_COUNTER_CURRENT(1)); +} + +static struct clocksource clocksource_netx = { + .name = "netx_timer", + .rating = 200, + .read = netx_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .is_continuous = 1, +}; + /* * Set up timer interrupt */ @@ -80,9 +87,20 @@ static void __init netx_timer_init(void) NETX_GPIO_COUNTER_CTRL(0)); setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq); + + /* Setup timer one for clocksource */ + writel(0, NETX_GPIO_COUNTER_CTRL(1)); + writel(0, NETX_GPIO_COUNTER_CURRENT(1)); + writel(0xFFFFFFFF, NETX_GPIO_COUNTER_MAX(1)); + + writel(NETX_GPIO_COUNTER_CTRL_RUN, + NETX_GPIO_COUNTER_CTRL(1)); + + clocksource_netx.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift); + clocksource_register(&clocksource_netx); } struct sys_timer netx_timer = { - .init = netx_timer_init, - .offset = netx_gettimeoffset, + .init = netx_timer_init, }; diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index d135568dc9e7..8781aaeb576b 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -43,6 +43,7 @@ config MACH_OMAP_H3 config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX + select TPS65010 help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 3a622801d7b0..7d0cf7af88ce 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 03d6905ba490..878ff9181d0e 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -22,6 +22,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/onenand.h> +#include <linux/irq.h> #include <linux/interrupt.h> #include <linux/delay.h> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index f4f04d87df32..d8f57824423f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -17,6 +17,7 @@ #include <linux/spinlock.h> #include <asm/io.h> +#include <asm/mach-types.h> #include <asm/arch/gpmc.h> #undef DEBUG @@ -338,19 +339,13 @@ void __init gpmc_mem_init(void) int cs; unsigned long boot_rom_space = 0; - if (cpu_is_omap242x()) { - u32 l; - l = omap_readl(OMAP242X_CONTROL_STATUS); - /* In case of internal boot the 1st MB is redirected to the - * boot ROM memory space. - */ - if (l & (1 << 3)) - boot_rom_space = BOOT_ROM_SPACE; - } else - /* We assume internal boot if the mode can't be - * determined. - */ - boot_rom_space = BOOT_ROM_SPACE; + /* never allocate the first page, to facilitate bug detection; + * even if we didn't boot from ROM. + */ + boot_rom_space = BOOT_ROM_SPACE; + /* In apollon the CS0 is mapped as 0x0000 0000 */ + if (machine_is_omap_apollon()) + boot_rom_space = 0; gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space; gpmc_mem_root.end = GPMC_MEM_END; diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile index b457ca0a431a..777564c90a12 100644 --- a/arch/arm/mach-pnx4008/Makefile +++ b/arch/arm/mach-pnx4008/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o +obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c new file mode 100644 index 000000000000..6f308827c4fe --- /dev/null +++ b/arch/arm/mach-pnx4008/i2c.c @@ -0,0 +1,167 @@ +/* + * I2C initialization for PNX4008. + * + * Author: Vitaly Wool <vitalywool@gmail.com> + * + * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/i2c-pnx.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <asm/arch/platform.h> +#include <asm/arch/i2c.h> + +static int set_clock_run(struct platform_device *pdev) +{ + struct clk *clk; + char name[10]; + int retval = 0; + + snprintf(name, 10, "i2c%d_ck", pdev->id); + clk = clk_get(&pdev->dev, name); + if (!IS_ERR(clk)) { + clk_set_rate(clk, 1); + clk_put(clk); + } else + retval = -ENOENT; + + return retval; +} + +static int set_clock_stop(struct platform_device *pdev) +{ + struct clk *clk; + char name[10]; + int retval = 0; + + snprintf(name, 10, "i2c%d_ck", pdev->id); + clk = clk_get(&pdev->dev, name); + if (!IS_ERR(clk)) { + clk_set_rate(clk, 0); + clk_put(clk); + } else + retval = -ENOENT; + + return retval; +} + +static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state) +{ + int retval = 0; +#ifdef CONFIG_PM + retval = set_clock_run(pdev); +#endif + return retval; +} + +static int i2c_pnx_resume(struct platform_device *pdev) +{ + int retval = 0; +#ifdef CONFIG_PM + retval = set_clock_run(pdev); +#endif + return retval; +} + +static u32 calculate_input_freq(struct platform_device *pdev) +{ + return HCLK_MHZ; +} + + +static struct i2c_pnx_algo_data pnx_algo_data0 = { + .base = PNX4008_I2C1_BASE, + .irq = I2C_1_INT, +}; + +static struct i2c_pnx_algo_data pnx_algo_data1 = { + .base = PNX4008_I2C2_BASE, + .irq = I2C_2_INT, +}; + +static struct i2c_pnx_algo_data pnx_algo_data2 = { + .base = (PNX4008_USB_CONFIG_BASE + 0x300), + .irq = USB_I2C_INT, +}; + +static struct i2c_adapter pnx_adapter0 = { + .name = I2C_CHIP_NAME "0", + .algo_data = &pnx_algo_data0, +}; +static struct i2c_adapter pnx_adapter1 = { + .name = I2C_CHIP_NAME "1", + .algo_data = &pnx_algo_data1, +}; + +static struct i2c_adapter pnx_adapter2 = { + .name = "USB-I2C", + .algo_data = &pnx_algo_data2, +}; + +static struct i2c_pnx_data i2c0_data = { + .suspend = i2c_pnx_suspend, + .resume = i2c_pnx_resume, + .calculate_input_freq = calculate_input_freq, + .set_clock_run = set_clock_run, + .set_clock_stop = set_clock_stop, + .adapter = &pnx_adapter0, +}; + +static struct i2c_pnx_data i2c1_data = { + .suspend = i2c_pnx_suspend, + .resume = i2c_pnx_resume, + .calculate_input_freq = calculate_input_freq, + .set_clock_run = set_clock_run, + .set_clock_stop = set_clock_stop, + .adapter = &pnx_adapter1, +}; + +static struct i2c_pnx_data i2c2_data = { + .suspend = i2c_pnx_suspend, + .resume = i2c_pnx_resume, + .calculate_input_freq = calculate_input_freq, + .set_clock_run = set_clock_run, + .set_clock_stop = set_clock_stop, + .adapter = &pnx_adapter2, +}; + +static struct platform_device i2c0_device = { + .name = "pnx-i2c", + .id = 0, + .dev = { + .platform_data = &i2c0_data, + }, +}; + +static struct platform_device i2c1_device = { + .name = "pnx-i2c", + .id = 1, + .dev = { + .platform_data = &i2c1_data, + }, +}; + +static struct platform_device i2c2_device = { + .name = "pnx-i2c", + .id = 2, + .dev = { + .platform_data = &i2c2_data, + }, +}; + +static struct platform_device *devices[] __initdata = { + &i2c0_device, + &i2c1_device, + &i2c2_device, +}; + +void __init pnx4008_register_i2c_devices(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 9e3d0bdcba07..5c0a10041cd1 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -75,28 +75,28 @@ endmenu config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x select SHARP_LOCOMO select PXA_SSP config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" - depends PXA_SHARPSL_27x + depends on PXA_SHARPSL_27x select PXA_SHARP_Cxx00 select MACH_SPITZ select I2C @@ -104,17 +104,17 @@ config MACH_AKITA config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" - depends PXA_SHARPSL_27x + depends on PXA_SHARPSL_27x select PXA_SHARP_Cxx00 config MACH_BORZOI bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" - depends PXA_SHARPSL_27x + depends on PXA_SHARPSL_27x select PXA_SHARP_Cxx00 config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x config PXA25x bool diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 4c3de4008a43..165017de8d0d 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -16,7 +16,7 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <asm/apm.h> +#include <asm/apm-emulation.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/hardware.h> diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 6ae605857ca9..9de1278d234f 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -76,7 +76,9 @@ unsigned long long sched_clock(void) /* * 96-bit math to perform tick * NSEC_PER_SEC / CLOCK_TICK_RATE for * any value of CLOCK_TICK_RATE. Max value is in the 80 thousand - * years range which is nice, but with higher computation cost. + * years range and truncation to unsigned long long limits it to + * sched_clock's max range of ~584 years. This is nice but with + * higher computation cost. */ { union { diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index db6e8f56a75f..b1d8cfca245a 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -23,7 +23,7 @@ #include <asm/hardware.h> #include <asm/mach-types.h> -#include <asm/apm.h> +#include <asm/apm-emulation.h> #include <asm/arch/pm.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/sharpsl.h> diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 40be833079c7..b97d543d9364 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -16,7 +16,7 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <asm/apm.h> +#include <asm/apm-emulation.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/hardware.h> diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index b91466861029..ee2beb400414 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -18,6 +18,7 @@ #include <linux/signal.h> #include <linux/errno.h> #include <linux/sched.h> +#include <linux/clocksource.h> #include <asm/system.h> #include <asm/hardware.h> @@ -48,27 +49,6 @@ static int pxa_set_rtc(void) return 0; } -/* IRQs are disabled before entering here from do_gettimeofday() */ -static unsigned long pxa_gettimeoffset (void) -{ - long ticks_to_match, elapsed, usec; - - /* Get ticks before next timer match */ - ticks_to_match = OSMR0 - OSCR; - - /* We need elapsed ticks since last match */ - elapsed = LATCH - ticks_to_match; - - /* don't get fooled by the workaround in pxa_timer_interrupt() */ - if (elapsed <= 0) - return 0; - - /* Now convert them to usec */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; - - return usec; -} - #ifdef CONFIG_NO_IDLE_HZ static unsigned long initial_match; static int match_posponed; @@ -121,6 +101,20 @@ static struct irqaction pxa_timer_irq = { .handler = pxa_timer_interrupt, }; +static cycle_t pxa_get_cycles(void) +{ + return OSCR; +} + +static struct clocksource clocksource_pxa = { + .name = "pxa_timer", + .rating = 200, + .read = pxa_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .is_continuous = 1, +}; + static void __init pxa_timer_init(void) { struct timespec tv; @@ -139,6 +133,14 @@ static void __init pxa_timer_init(void) OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ OSMR0 = OSCR + LATCH; /* set initial match */ local_irq_restore(flags); + + /* + * OSCR runs continuously on PXA and is not written to, + * so we can use it as clock source directly. + */ + clocksource_pxa.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_pxa.shift); + clocksource_register(&clocksource_pxa); } #ifdef CONFIG_NO_IDLE_HZ @@ -211,7 +213,6 @@ struct sys_timer pxa_timer = { .init = pxa_timer_init, .suspend = pxa_timer_suspend, .resume = pxa_timer_resume, - .offset = pxa_gettimeoffset, #ifdef CONFIG_NO_IDLE_HZ .dyn_tick = &pxa_dyn_tick, #endif diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index c1827d021ba8..119c64b7223f 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -393,10 +393,6 @@ static struct pxafb_mach_info sharp_lcd = { .pxafb_backlight_power = board_backlight_power, }; -static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) -{ -} - static void __init trizeps4_init(void) { platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices)); @@ -469,7 +465,6 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, - .fixup = trizeps4_fixup, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa_init_irq, diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 68c67053f479..84d3fe76e94e 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -141,6 +141,19 @@ struct platform_device realview_smc91x_device = { .resource = realview_smc91x_resources, }; +static struct resource realview_i2c_resource = { + .start = REALVIEW_I2C_BASE, + .end = REALVIEW_I2C_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +struct platform_device realview_i2c_device = { + .name = "versatile-i2c", + .id = -1, + .num_resources = 1, + .resource = &realview_i2c_resource, +}; + #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) static unsigned int realview_mmc_status(struct device *dev) diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 93e86d9f439c..2b53420f9c1b 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -108,6 +108,7 @@ static struct amba_device name##_device = { \ extern struct platform_device realview_flash_device; extern struct platform_device realview_smc91x_device; +extern struct platform_device realview_i2c_device; extern struct mmc_platform_data realview_mmc0_plat_data; extern struct mmc_platform_data realview_mmc1_plat_data; extern struct clk realview_clcd_clk; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 84a959530fb6..9741b4d3c9cf 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -155,6 +155,7 @@ static void __init realview_eb_init(void) platform_device_register(&realview_flash_device); platform_device_register(&realview_smc91x_device); + platform_device_register(&realview_i2c_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 9f46bf330bc8..eb4ec411312b 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -5,6 +5,7 @@ menu "S3C24XX Implementations" config MACH_AML_M5900 bool "AML M5900 Series" select CPU_S3C2410 + select PM_SIMTEC if PM help Say Y here if you are using the American Microsystems M5900 Series <http://www.amltd.com> @@ -12,6 +13,7 @@ config MACH_AML_M5900 config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select CPU_S3C2440 + select PM_SIMTEC if PM help Say Y here if you are using the Simtec Electronics ANUBIS development system @@ -19,6 +21,7 @@ config MACH_ANUBIS config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" select CPU_S3C2440 + select PM_SIMTEC if PM help Say Y here if you are using the Simtec IM2440D20 module, also known as the Osiris. @@ -26,6 +29,7 @@ config MACH_OSIRIS config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 + select PM_SIMTEC if PM select ISA help Say Y here if you are using the Simtec Electronics EB2410ITX @@ -43,14 +47,13 @@ config BAST_PC104_IRQ config PM_H1940 bool - depends on PM help Internal node for H1940 and related PM config ARCH_H1940 bool "IPAQ H1940" select CPU_S3C2410 - select PM_H1940 + select PM_H1940 if PM help Say Y here if you are using the HP IPAQ H1940 @@ -112,6 +115,7 @@ config MACH_SMDK2413 config MACH_VR1000 bool "Thorcom VR1000" + select PM_SIMTEC if PM select CPU_S3C2410 help Say Y here if you are using the Thorcom VR1000 board. @@ -122,7 +126,7 @@ config MACH_VR1000 config MACH_RX3715 bool "HP iPAQ rx3715" select CPU_S3C2440 - select PM_H1940 + select PM_H1940 if PM help Say Y here if you are using the HP iPAQ rx3715. @@ -156,7 +160,6 @@ config S3C2410_CLOCK config S3C2410_PM bool - depends on CONFIG_PM help Power Management code common to S3C2410 and better @@ -171,7 +174,7 @@ config CPU_S3C2410 bool depends on ARCH_S3C2410 select S3C2410_CLOCK - select S3C2410_PM + select S3C2410_PM if PM help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -186,14 +189,13 @@ config CPU_S3C2412_ONLY config S3C2412_PM bool - default y if PM - depends on CPU_S3C2412 help Internal config node to apply S3C2412 power management config CPU_S3C2412 bool depends on ARCH_S3C2410 + select S3C2412_PM if PM help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line @@ -207,7 +209,7 @@ config CPU_S3C2440 bool depends on ARCH_S3C2410 select S3C2410_CLOCK - select S3C2410_PM + select S3C2410_PM if PM select CPU_S3C244X help Support for S3C2440 Samsung Mobile CPU based systems. @@ -216,7 +218,7 @@ config CPU_S3C2442 bool depends on ARCH_S3C2420 select S3C2410_CLOCK - select S3C2410_PM + select S3C2410_PM if PM select CPU_S3C244X help Support for S3C2442 Samsung Mobile CPU based systems. @@ -300,8 +302,9 @@ config S3C2410_PM_CHECK_CHUNKSIZE config PM_SIMTEC bool - depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900) - default y + help + Common power management code for systems that are + compatible with the Simtec style of power management config S3C2410_LOWLEVEL_UART_PORT int "S3C2410 UART to use for low-level messages" diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c index 9d4899eddf1f..ae1f5bb63f7a 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/mach-s3c2410/cpu.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/hardware.h> diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index cae35ff76f33..faccde2092d2 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -17,6 +17,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 01abb0ace234..fa860e716b4f 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/dma.c * - * (c) 2003-2005,2006 Simtec Electronics + * Copyright (c) 2003-2005,2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 DMA core @@ -1053,11 +1053,11 @@ int s3c2410_dma_config(dmach_t channel, if (chan == NULL) return -EINVAL; - printk("Initial dcon is %08x\n", dcon); + pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon); dcon |= chan->dcon & dma_sel.dcon_mask; - printk("New dcon is %08x\n", dcon); + pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon); switch (xferunit) { case 1: diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index ba346546150b..f6fb215bb48c 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -57,6 +57,7 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) case S3C2410_GPIO_SFN2: case S3C2410_GPIO_SFN3: if (pin < S3C2410_GPIO_BANKB) { + function -= 1; function &= 1; function <<= S3C2410_GPIO_OFFSET(pin); } else { @@ -83,15 +84,18 @@ EXPORT_SYMBOL(s3c2410_gpio_cfgpin); unsigned int s3c2410_gpio_getcfg(unsigned int pin) { void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long mask; + unsigned long val = __raw_readl(base); if (pin < S3C2410_GPIO_BANKB) { - mask = 1 << S3C2410_GPIO_OFFSET(pin); + val >>= S3C2410_GPIO_OFFSET(pin); + val &= 1; + val += 1; } else { - mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; + val >>= S3C2410_GPIO_OFFSET(pin)*2; + val &= 3; } - return __raw_readl(base) & mask; + return val | S3C2410_GPIO_INPUT; } EXPORT_SYMBOL(s3c2410_gpio_getcfg); diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h index 3686a0082245..e5913da3b919 100644 --- a/arch/arm/mach-s3c2410/irq.h +++ b/arch/arm/mach-s3c2410/irq.h @@ -8,8 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: */ #define irqdbf(x...) diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index e94cdcd96591..0fad0c2fe07b 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -15,6 +15,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 2968fb235f95..b8b76757ec54 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/dm9000.h> diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index f5b98099a5d9..15b625eae499 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -17,6 +17,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> @@ -37,8 +38,6 @@ #include <asm/arch/h1940-latch.h> #include <asm/arch/fb.h> -#include <linux/serial_core.h> - #include "clock.h" #include "devs.h" #include "cpu.h" diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 116ac3169966..0411e9adb54d 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/kthread.h> @@ -37,8 +38,6 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/iic.h> -#include <linux/serial_core.h> - #include "s3c2410.h" #include "clock.h" #include "devs.h" diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c index 065a1d4e860b..d6dfdad8c90b 100644 --- a/arch/arm/mach-s3c2410/mach-nexcoder.c +++ b/arch/arm/mach-s3c2410/mach-nexcoder.c @@ -19,6 +19,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/string.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/mtd/map.h> diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c index a4ab144e7292..37b40850c9b9 100644 --- a/arch/arm/mach-s3c2410/mach-osiris.c +++ b/arch/arm/mach-s3c2410/mach-osiris.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/serial_core.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index c71673fd9955..2c738b375e4d 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -15,6 +15,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index b3b0171d5052..01c0c986d827 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -35,6 +35,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2410/mach-smdk2413.c index 3a4ca7f6f7b9..4f89abd7a6df 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2413.c +++ b/arch/arm/mach-s3c2410/mach-smdk2413.c @@ -17,6 +17,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index e2205ff1b0ee..2b61f4ed1da4 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -19,6 +19,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index e2eda3937ab0..a382fc095110 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -352,7 +352,7 @@ static struct platform_device vr1000_led2 = { static struct platform_device vr1000_led3 = { .name = "s3c24xx_led", - .id = 1, + .id = 3, .dev = { .platform_data = &vr1000_led3_pdata, }, diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c index ea554e7c006e..0360e1055bcd 100644 --- a/arch/arm/mach-s3c2410/mach-vstms.c +++ b/arch/arm/mach-s3c2410/mach-vstms.c @@ -15,6 +15,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c index 42cd05e298f8..619133eb7168 100644 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -27,7 +27,6 @@ #include <asm/io.h> #include <asm/arch/map.h> -#include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-mem.h> diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index b49a0b3b72b3..ebf294dd31da 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -34,6 +34,7 @@ #include <linux/crc32.h> #include <linux/ioport.h> #include <linux/delay.h> +#include <linux/serial_core.h> #include <asm/cacheflush.h> #include <asm/hardware.h> @@ -450,15 +451,14 @@ static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); pinstate = s3c2410_gpio_getcfg(pin); - pinstate >>= S3C2410_GPIO_OFFSET(pin)*2; if (!irqstate) { - if (pinstate == 0x02) + if (pinstate == S3C2410_GPIO_IRQ) DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); } else { - if (pinstate == 0x02) { + if (pinstate == S3C2410_GPIO_IRQ) { DBG("Disabling IRQ %d (pin %d)\n", irq, pin); - s3c2410_gpio_cfgpin(pin, 0x00); + s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); } } } diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c index 00abe199a08e..992cc6af230e 100644 --- a/arch/arm/mach-s3c2410/s3c2410-clock.c +++ b/arch/arm/mach-s3c2410/s3c2410-clock.c @@ -30,13 +30,18 @@ #include <linux/clk.h> #include <linux/mutex.h> #include <linux/delay.h> +#include <linux/serial_core.h> + +#include <asm/mach/map.h> #include <asm/hardware.h> #include <asm/io.h> +#include <asm/arch/regs-serial.h> #include <asm/arch/regs-clock.h> #include <asm/arch/regs-gpio.h> +#include "s3c2410.h" #include "clock.h" #include "cpu.h" diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c index 51e5098b32e8..e67ba3911f11 100644 --- a/arch/arm/mach-s3c2410/s3c2410-dma.c +++ b/arch/arm/mach-s3c2410/s3c2410-dma.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/s3c2410-dma.c * - * (c) 2006 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 DMA selection @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/sysdev.h> +#include <linux/serial_core.h> #include <asm/dma.h> #include <asm/arch/dma.h> @@ -131,6 +132,7 @@ static int s3c2410_dma_add(struct sys_device *sysdev) return s3c24xx_dma_init_map(&s3c2410_dma_sel); } +#if defined(CONFIG_CPU_S3C2410) static struct sysdev_driver s3c2410_dma_driver = { .add = s3c2410_dma_add, }; @@ -141,9 +143,10 @@ static int __init s3c2410_dma_init(void) } arch_initcall(s3c2410_dma_init); +#endif +#if defined(CONFIG_CPU_S3C2442) /* S3C2442 DMA contains the same selection table as the S3C2410 */ - static struct sysdev_driver s3c2442_dma_driver = { .add = s3c2410_dma_add, }; @@ -154,5 +157,5 @@ static int __init s3c2442_dma_init(void) } arch_initcall(s3c2442_dma_init); - +#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c index 77c6814c0f05..8bb6e5e21f59 100644 --- a/arch/arm/mach-s3c2410/s3c2410-pm.c +++ b/arch/arm/mach-s3c2410/s3c2410-pm.c @@ -87,7 +87,7 @@ static void s3c2410_pm_prepare(void) } -int s3c2410_pm_resume(struct sys_device *dev) +static int s3c2410_pm_resume(struct sys_device *dev) { unsigned long tmp; @@ -111,6 +111,7 @@ static int s3c2410_pm_add(struct sys_device *dev) return 0; } +#if defined(CONFIG_CPU_S3C2410) static struct sysdev_driver s3c2410_pm_driver = { .add = s3c2410_pm_add, .resume = s3c2410_pm_resume, @@ -124,7 +125,9 @@ static int __init s3c2410_pm_drvinit(void) } arch_initcall(s3c2410_pm_drvinit); +#endif +#if defined(CONFIG_CPU_S3C2440) static struct sysdev_driver s3c2440_pm_driver = { .add = s3c2410_pm_add, .resume = s3c2410_pm_resume, @@ -136,7 +139,9 @@ static int __init s3c2440_pm_drvinit(void) } arch_initcall(s3c2440_pm_drvinit); +#endif +#if defined(CONFIG_CPU_S3C2442) static struct sysdev_driver s3c2442_pm_driver = { .add = s3c2410_pm_add, .resume = s3c2410_pm_resume, @@ -148,3 +153,4 @@ static int __init s3c2442_pm_drvinit(void) } arch_initcall(s3c2442_pm_drvinit); +#endif diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 183e4033ce61..4cdc0d70c19f 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -17,6 +17,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/sysdev.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> @@ -38,11 +39,9 @@ /* Initial IO mappings */ static struct map_desc s3c2410_iodesc[] __initdata = { - IODESC_ENT(USBHOST), IODESC_ENT(CLKPWR), IODESC_ENT(LCD), IODESC_ENT(TIMER), - IODESC_ENT(ADC), IODESC_ENT(WATCHDOG), }; diff --git a/arch/arm/mach-s3c2410/s3c2412-clock.c b/arch/arm/mach-s3c2410/s3c2412-clock.c index c95ed3e18580..8f94ad83901d 100644 --- a/arch/arm/mach-s3c2410/s3c2412-clock.c +++ b/arch/arm/mach-s3c2410/s3c2412-clock.c @@ -30,13 +30,18 @@ #include <linux/clk.h> #include <linux/mutex.h> #include <linux/delay.h> +#include <linux/serial_core.h> + +#include <asm/mach/map.h> #include <asm/hardware.h> #include <asm/io.h> +#include <asm/arch/regs-serial.h> #include <asm/arch/regs-clock.h> #include <asm/arch/regs-gpio.h> +#include "s3c2412.h" #include "clock.h" #include "cpu.h" @@ -49,7 +54,7 @@ * set the correct muxing at initialisation */ -int s3c2412_clkcon_enable(struct clk *clk, int enable) +static int s3c2412_clkcon_enable(struct clk *clk, int enable) { unsigned int clocks = clk->ctrlbit; unsigned long clkcon; @@ -556,7 +561,7 @@ struct clk_init { struct clk *src_1; }; -struct clk_init clks_src[] __initdata = { +static struct clk_init clks_src[] __initdata = { { .clk = &clk_usysclk, .bit = S3C2412_CLKSRC_USBCLK_HCLK, @@ -619,7 +624,7 @@ static void __init s3c2412_clk_initparents(void) /* clocks to add straight away */ -struct clk *clks[] __initdata = { +static struct clk *clks[] __initdata = { &clk_ext, &clk_usb_bus, &clk_erefclk, diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c index 171f3706d36d..138f726ac6bf 100644 --- a/arch/arm/mach-s3c2410/s3c2412-dma.c +++ b/arch/arm/mach-s3c2410/s3c2412-dma.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/s3c2412-dma.c * - * (c) 2006 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2412 DMA selection @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/sysdev.h> +#include <linux/serial_core.h> #include <asm/dma.h> #include <asm/arch/dma.h> @@ -132,8 +133,8 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map) { - writel(chan->regs + S3C2412_DMA_DMAREQSEL, - map->channels[0] | S3C2412_DMAREQSEL_HW); + writel(map->channels[0] | S3C2412_DMAREQSEL_HW, + chan->regs + S3C2412_DMA_DMAREQSEL); } static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c index e76431c41461..2f651a811ecd 100644 --- a/arch/arm/mach-s3c2410/s3c2412.c +++ b/arch/arm/mach-s3c2410/s3c2412.c @@ -17,6 +17,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/sysdev.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> @@ -60,7 +61,6 @@ static struct map_desc s3c2412_iodesc[] __initdata = { IODESC_ENT(CLKPWR), IODESC_ENT(LCD), IODESC_ENT(TIMER), - IODESC_ENT(ADC), IODESC_ENT(WATCHDOG), }; diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c index 15796864d010..ba13c1d079d1 100644 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -113,18 +113,18 @@ static int s3c2440_clk_add(struct sys_device *sysdev) { unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); unsigned long clkdivn; - struct clk *clk_h; - struct clk *clk_p; - struct clk *clk_upll; + struct clk *clock_h; + struct clk *clock_p; + struct clk *clock_upll; printk("S3C2440: Clock Support, DVS %s\n", (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - clk_p = clk_get(NULL, "pclk"); - clk_h = clk_get(NULL, "hclk"); - clk_upll = clk_get(NULL, "upll"); + clock_p = clk_get(NULL, "pclk"); + clock_h = clk_get(NULL, "hclk"); + clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) { + if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); return -EINVAL; } @@ -132,8 +132,8 @@ static int s3c2440_clk_add(struct sys_device *sysdev) /* check rate of UPLL, and if it is near 96MHz, then change * to using half the UPLL rate for the system */ - if (clk_get_rate(clk_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clk_upll) / 2; + if (clk_get_rate(clock_upll) > (94 * MHZ)) { + clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; mutex_lock(&clocks_mutex); @@ -144,9 +144,9 @@ static int s3c2440_clk_add(struct sys_device *sysdev) mutex_unlock(&clocks_mutex); } - s3c2440_clk_cam.parent = clk_h; - s3c2440_clk_ac97.parent = clk_p; - s3c2440_clk_cam_upll.parent = clk_upll; + s3c2440_clk_cam.parent = clock_h; + s3c2440_clk_ac97.parent = clock_p; + s3c2440_clk_cam_upll.parent = clock_upll; s3c24xx_register_clock(&s3c2440_clk_ac97); s3c24xx_register_clock(&s3c2440_clk_cam); diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c index 11e109c84a15..47b861b9443d 100644 --- a/arch/arm/mach-s3c2410/s3c2440-dma.c +++ b/arch/arm/mach-s3c2410/s3c2440-dma.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/s3c2440-dma.c * - * (c) 2006 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2440 DMA selection @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/sysdev.h> +#include <linux/serial_core.h> #include <asm/dma.h> #include <asm/arch/dma.h> diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c index 0ab50f44f318..344eb27cca48 100644 --- a/arch/arm/mach-s3c2410/s3c2440.c +++ b/arch/arm/mach-s3c2410/s3c2440.c @@ -17,6 +17,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/serial_core.h> #include <linux/sysdev.h> #include <linux/clk.h> @@ -28,17 +29,9 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-gpioj.h> -#include <asm/arch/regs-dsc.h> - #include "s3c2440.h" -#include "clock.h" #include "devs.h" #include "cpu.h" -#include "pm.h" static struct sys_device s3c2440_sysdev = { .cls = &s3c2440_sysclass, diff --git a/arch/arm/mach-s3c2410/s3c2440.h b/arch/arm/mach-s3c2410/s3c2440.h index 29cb6df65a48..dcd316076c59 100644 --- a/arch/arm/mach-s3c2410/s3c2440.h +++ b/arch/arm/mach-s3c2410/s3c2440.h @@ -8,28 +8,10 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 24-Aug-2004 BJD Start of S3C2440 CPU support - * 04-Nov-2004 BJD Added s3c2440_init_uarts() - * 04-Jan-2005 BJD Moved uart init to cpu code - * 10-Jan-2005 BJD Moved 2440 specific init here - * 14-Jan-2005 BJD Split the clock initialisation code */ #ifdef CONFIG_CPU_S3C2440 - extern int s3c2440_init(void); - -extern void s3c2440_map_io(struct map_desc *mach_desc, int size); - -extern void s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2440_init_clocks(int xtal); - #else -#define s3c2440_init_clocks NULL -#define s3c2440_init_uarts NULL -#define s3c2440_map_io NULL #define s3c2440_init NULL #endif diff --git a/arch/arm/mach-s3c2410/s3c2442-clock.c b/arch/arm/mach-s3c2410/s3c2442-clock.c index d9f54b5cab7f..4e292ca7c9be 100644 --- a/arch/arm/mach-s3c2410/s3c2442-clock.c +++ b/arch/arm/mach-s3c2410/s3c2442-clock.c @@ -117,18 +117,18 @@ static int s3c2442_clk_add(struct sys_device *sysdev) { unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); unsigned long clkdivn; - struct clk *clk_h; - struct clk *clk_p; - struct clk *clk_upll; + struct clk *clock_h; + struct clk *clock_p; + struct clk *clock_upll; printk("S3C2442: Clock Support, DVS %s\n", (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - clk_p = clk_get(NULL, "pclk"); - clk_h = clk_get(NULL, "hclk"); - clk_upll = clk_get(NULL, "upll"); + clock_p = clk_get(NULL, "pclk"); + clock_h = clk_get(NULL, "hclk"); + clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) { + if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); return -EINVAL; } @@ -136,8 +136,8 @@ static int s3c2442_clk_add(struct sys_device *sysdev) /* check rate of UPLL, and if it is near 96MHz, then change * to using half the UPLL rate for the system */ - if (clk_get_rate(clk_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clk_upll) / 2; + if (clk_get_rate(clock_upll) > (94 * MHZ)) { + clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; mutex_lock(&clocks_mutex); @@ -148,8 +148,8 @@ static int s3c2442_clk_add(struct sys_device *sysdev) mutex_unlock(&clocks_mutex); } - s3c2442_clk_cam.parent = clk_h; - s3c2442_clk_cam_upll.parent = clk_upll; + s3c2442_clk_cam.parent = clock_h; + s3c2442_clk_cam_upll.parent = clock_upll; s3c24xx_register_clock(&s3c2442_clk_cam); s3c24xx_register_clock(&s3c2442_clk_cam_upll); diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2410/s3c2442.c index 581667efd13c..428732ee68c4 100644 --- a/arch/arm/mach-s3c2410/s3c2442.c +++ b/arch/arm/mach-s3c2410/s3c2442.c @@ -16,29 +16,11 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> -#include <linux/platform_device.h> +#include <linux/serial_core.h> #include <linux/sysdev.h> -#include <linux/clk.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-gpioj.h> -#include <asm/arch/regs-dsc.h> #include "s3c2442.h" -#include "clock.h" -#include "devs.h" #include "cpu.h" -#include "pm.h" static struct sys_device s3c2442_sysdev = { .cls = &s3c2442_sysclass, diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/mach-s3c2410/s3c244x.c index 9a2258270de9..23c7494ad10d 100644 --- a/arch/arm/mach-s3c2410/s3c244x.c +++ b/arch/arm/mach-s3c2410/s3c244x.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/sysdev.h> #include <linux/clk.h> @@ -47,8 +48,6 @@ static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(TIMER), IODESC_ENT(WATCHDOG), IODESC_ENT(LCD), - IODESC_ENT(ADC), - IODESC_ENT(USBHOST), }; /* uart initialisation */ diff --git a/arch/arm/mach-s3c2410/usb-simtec.h b/arch/arm/mach-s3c2410/usb-simtec.h index d8aa6127dedb..03842ede9e71 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.h +++ b/arch/arm/mach-s3c2410/usb-simtec.h @@ -10,9 +10,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 20-Aug-2004 BJD Created */ extern int usb_simtec_init(void); diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 17f5a43acdb7..54ecdaa373d6 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -1,5 +1,15 @@ /* * linux/arch/arm/mach-sa1100/jornada720.c + * + * HP Jornada720 init code + * + * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl> + * Copyright (C) 2005 Michael Gernoth <michael@gernoth.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * */ #include <linux/init.h> @@ -10,13 +20,13 @@ #include <linux/ioport.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <video/s1d13xxxfb.h> #include <asm/hardware.h> #include <asm/hardware/sa1111.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/setup.h> - #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> @@ -24,13 +34,170 @@ #include "generic.h" +/* + * HP Documentation referred in this file: + * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt + */ + +/* line 110 of HP's doc */ +#define TUCR_VAL 0x20000400 + +/* memory space (line 52 of HP's doc) */ +#define SA1111REGSTART 0x40000000 +#define SA1111REGLEN 0x00001fff +#define EPSONREGSTART 0x48000000 +#define EPSONREGLEN 0x00100000 +#define EPSONFBSTART 0x48200000 +/* 512kB framebuffer */ +#define EPSONFBLEN 512*1024 + +static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = { + /* line 344 of HP's doc */ + {0x0001,0x00}, // Miscellaneous Register + {0x01FC,0x00}, // Display Mode Register + {0x0004,0x00}, // General IO Pins Configuration Register 0 + {0x0005,0x00}, // General IO Pins Configuration Register 1 + {0x0008,0x00}, // General IO Pins Control Register 0 + {0x0009,0x00}, // General IO Pins Control Register 1 + {0x0010,0x01}, // Memory Clock Configuration Register + {0x0014,0x11}, // LCD Pixel Clock Configuration Register + {0x0018,0x01}, // CRT/TV Pixel Clock Configuration Register + {0x001C,0x01}, // MediaPlug Clock Configuration Register + {0x001E,0x01}, // CPU To Memory Wait State Select Register + {0x0020,0x00}, // Memory Configuration Register + {0x0021,0x45}, // DRAM Refresh Rate Register + {0x002A,0x01}, // DRAM Timings Control Register 0 + {0x002B,0x03}, // DRAM Timings Control Register 1 + {0x0030,0x1c}, // Panel Type Register + {0x0031,0x00}, // MOD Rate Register + {0x0032,0x4F}, // LCD Horizontal Display Width Register + {0x0034,0x07}, // LCD Horizontal Non-Display Period Register + {0x0035,0x01}, // TFT FPLINE Start Position Register + {0x0036,0x0B}, // TFT FPLINE Pulse Width Register + {0x0038,0xEF}, // LCD Vertical Display Height Register 0 + {0x0039,0x00}, // LCD Vertical Display Height Register 1 + {0x003A,0x13}, // LCD Vertical Non-Display Period Register + {0x003B,0x0B}, // TFT FPFRAME Start Position Register + {0x003C,0x01}, // TFT FPFRAME Pulse Width Register + {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp) + {0x0041,0x00}, // LCD Miscellaneous Register + {0x0042,0x00}, // LCD Display Start Address Register 0 + {0x0043,0x00}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + {0x0046,0x80}, // LCD Memory Address Offset Register 0 + {0x0047,0x02}, // LCD Memory Address Offset Register 1 + {0x0048,0x00}, // LCD Pixel Panning Register + {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register + {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register + {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register + {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register + {0x0053,0x01}, // CRT/TV HRTC Start Position Register + {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register + {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0 + {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1 + {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register + {0x0059,0x09}, // CRT/TV VRTC Start Position Register + {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register + {0x005B,0x10}, // TV Output Control Register + {0x0060,0x03}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp) + {0x0062,0x00}, // CRT/TV Display Start Address Register 0 + {0x0063,0x00}, // CRT/TV Display Start Address Register 1 + {0x0064,0x00}, // CRT/TV Display Start Address Register 2 + {0x0066,0x40}, // CRT/TV Memory Address Offset Register 0 + {0x0067,0x01}, // CRT/TV Memory Address Offset Register 1 + {0x0068,0x00}, // CRT/TV Pixel Panning Register + {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register + {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register + {0x0070,0x00}, // LCD Ink/Cursor Control Register + {0x0071,0x01}, // LCD Ink/Cursor Start Address Register + {0x0072,0x00}, // LCD Cursor X Position Register 0 + {0x0073,0x00}, // LCD Cursor X Position Register 1 + {0x0074,0x00}, // LCD Cursor Y Position Register 0 + {0x0075,0x00}, // LCD Cursor Y Position Register 1 + {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register + {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register + {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register + {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register + {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register + {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register + {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register + {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register + {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register + {0x0082,0x00}, // CRT/TV Cursor X Position Register 0 + {0x0083,0x00}, // CRT/TV Cursor X Position Register 1 + {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0 + {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1 + {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register + {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register + {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register + {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register + {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register + {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register + {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register + {0x0100,0x00}, // BitBlt Control Register 0 + {0x0101,0x00}, // BitBlt Control Register 1 + {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register + {0x0103,0x00}, // BitBlt Operation Register + {0x0104,0x00}, // BitBlt Source Start Address Register 0 + {0x0105,0x00}, // BitBlt Source Start Address Register 1 + {0x0106,0x00}, // BitBlt Source Start Address Register 2 + {0x0108,0x00}, // BitBlt Destination Start Address Register 0 + {0x0109,0x00}, // BitBlt Destination Start Address Register 1 + {0x010A,0x00}, // BitBlt Destination Start Address Register 2 + {0x010C,0x00}, // BitBlt Memory Address Offset Register 0 + {0x010D,0x00}, // BitBlt Memory Address Offset Register 1 + {0x0110,0x00}, // BitBlt Width Register 0 + {0x0111,0x00}, // BitBlt Width Register 1 + {0x0112,0x00}, // BitBlt Height Register 0 + {0x0113,0x00}, // BitBlt Height Register 1 + {0x0114,0x00}, // BitBlt Background Color Register 0 + {0x0115,0x00}, // BitBlt Background Color Register 1 + {0x0118,0x00}, // BitBlt Foreground Color Register 0 + {0x0119,0x00}, // BitBlt Foreground Color Register 1 + {0x01E0,0x00}, // Look-Up Table Mode Register + {0x01E2,0x00}, // Look-Up Table Address Register + /* not sure, wouldn't like to mess with the driver */ + {0x01E4,0x00}, // Look-Up Table Data Register + /* jornada doc says 0x00, but I trust the driver */ + {0x01F0,0x10}, // Power Save Configuration Register + {0x01F1,0x00}, // Power Save Status Register + {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register + {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT) +}; + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL +}; -#define JORTUCR_VAL 0x20000400 +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = EPSONFBSTART, + .end = EPSONFBSTART + EPSONFBLEN, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = EPSONREGSTART, + .end = EPSONREGSTART + EPSONREGLEN, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; static struct resource sa1111_resources[] = { [0] = { - .start = 0x40000000, - .end = 0x40001fff, + .start = SA1111REGSTART, + .end = SA1111REGSTART + SA1111REGLEN, .flags = IORESOURCE_MEM, }, [1] = { @@ -53,18 +220,32 @@ static struct platform_device sa1111_device = { .resource = sa1111_resources, }; +static struct platform_device jornada720_mcu_device = { + .name = "jornada720_mcu", + .id = -1, +}; + static struct platform_device *devices[] __initdata = { &sa1111_device, + &jornada720_mcu_device, + &s1d13xxxfb_device, }; +/* a stub for now, we theoretically cannot suspend without a flashboard */ +int pm_suspend(suspend_state_t state) +{ + return -1; +} + static int __init jornada720_init(void) { int ret = -ENODEV; if (machine_is_jornada720()) { GPDR |= GPIO_GPIO20; - TUCR = JORTUCR_VAL; /* set the oscillator out to the SA-1101 */ - + /* oscillator setup (line 116 of HP's doc) */ + TUCR = TUCR_VAL; + /* resetting SA1111 (line 118 of HP's doc) */ GPSR = GPIO_GPIO20; udelay(1); GPCR = GPIO_GPIO20; @@ -72,10 +253,6 @@ static int __init jornada720_init(void) GPSR = GPIO_GPIO20; udelay(20); - /* LDD4 is speaker, LDD3 is microphone */ - PPSR &= ~(PPC_LDD3 | PPC_LDD4); - PPDR |= PPC_LDD3 | PPC_LDD4; - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } return ret; @@ -85,19 +262,19 @@ arch_initcall(jornada720_init); static struct map_desc jornada720_io_desc[] __initdata = { { /* Epson registers */ - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0x48000000), - .length = 0x00100000, + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(EPSONREGSTART), + .length = EPSONREGLEN, .type = MT_DEVICE }, { /* Epson frame buffer */ - .virtual = 0xf1000000, - .pfn = __phys_to_pfn(0x48200000), - .length = 0x00100000, + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(EPSONFBSTART), + .length = EPSONFBLEN, .type = MT_DEVICE }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(0x40000000), - .length = 0x00100000, + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(SA1111REGSTART), + .length = SA1111REGLEN, .type = MT_DEVICE } }; @@ -106,7 +283,7 @@ static void __init jornada720_map_io(void) { sa1100_map_io(); iotable_init(jornada720_io_desc, ARRAY_SIZE(jornada720_io_desc)); - + sa1100_register_uart(0, 3); sa1100_register_uart(1, 1); } @@ -116,7 +293,7 @@ static struct mtd_partition jornada720_partitions[] = { .name = "JORNADA720 boot firmware", .size = 0x00040000, .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "JORNADA720 kernel", .size = 0x000c0000, @@ -139,7 +316,7 @@ static struct mtd_partition jornada720_partitions[] = { .offset = 0x00540000, }, { .name = "JORNADA720 usr local", - .size = 0, /* will expand to the end of the flash */ + .size = 0, /* will expand to the end of the flash */ .offset = 0x00d00000, } }; @@ -147,10 +324,12 @@ static struct mtd_partition jornada720_partitions[] = { static void jornada720_set_vpp(int vpp) { if (vpp) - PPSR |= 0x80; + /* enabling flash write (line 470 of HP's doc) */ + PPSR |= PPC_LDD7; else - PPSR &= ~0x80; - PPDR |= 0x80; + /* disabling flash write (line 470 of HP's doc) */ + PPSR &= ~PPC_LDD7; + PPDR |= PPC_LDD7; } static struct flash_platform_data jornada720_flash_data = { diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 57196947559f..bf71507c76fd 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -325,6 +325,19 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static struct resource versatile_i2c_resource = { + .start = VERSATILE_I2C_BASE, + .end = VERSATILE_I2C_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device versatile_i2c_device = { + .name = "versatile-i2c", + .id = -1, + .num_resources = 1, + .resource = &versatile_i2c_resource, +}; + #define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET) unsigned int mmc_status(struct device *dev) @@ -775,6 +788,7 @@ void __init versatile_init(void) clk_register(&versatile_clcd_clk); platform_device_register(&versatile_flash_device); + platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index b797217e82be..6a9c362fef5e 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -238,7 +238,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, * x86 does not mark the pages reserved... */ SetPageReserved(page); - set_pte(pte, mk_pte(page, prot)); + set_pte_ext(pte, mk_pte(page, prot), 0); page++; pte++; off++; diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index df1645e14b4c..ded0e96d069d 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -19,6 +19,7 @@ #include <asm/page.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> +#include <asm/cacheflush.h> #include "mm.h" @@ -69,9 +70,14 @@ mc_copy_user_page(void *from, void *to) void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) { + struct page *page = virt_to_page(kfrom); + + if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) + __flush_dcache_page(page_mapping(page), page); + spin_lock(&minicache_lock); - set_pte(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot)); + set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0); flush_tlb_kernel_page(0xffff8000); mc_copy_user_page((void *)0xffff8000, kto); diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 3d0d3a963d20..3adb79257f43 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -53,6 +53,10 @@ static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned lo { unsigned int offset = CACHE_COLOUR(vaddr); unsigned long from, to; + struct page *page = virt_to_page(kfrom); + + if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) + __flush_dcache_page(page_mapping(page), page); /* * Discard data in the kernel mapping for the new page. @@ -70,8 +74,8 @@ static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned lo */ spin_lock(&v6_lock); - set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL)); - set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL)); + set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL), 0); + set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL), 0); from = from_address + (offset << PAGE_SHIFT); to = to_address + (offset << PAGE_SHIFT); @@ -110,7 +114,7 @@ static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr) */ spin_lock(&v6_lock); - set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL)); + set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL), 0); flush_tlb_kernel_page(to); clear_page((void *)to); diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 84ebe0aa379e..2e455f82a4d5 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -19,6 +19,7 @@ #include <asm/page.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> +#include <asm/cacheflush.h> #include "mm.h" @@ -91,9 +92,14 @@ mc_copy_user_page(void *from, void *to) void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) { + struct page *page = virt_to_page(kfrom); + + if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) + __flush_dcache_page(page_mapping(page), page); + spin_lock(&minicache_lock); - set_pte(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot)); + set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0); flush_tlb_kernel_page(COPYPAGE_MINICACHE); mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 7fc1b35a6746..cf95c5d0ce4c 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -61,7 +61,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) if (pte_present(entry) && pte_val(entry) & shared_pte_mask) { flush_cache_page(vma, address, pte_pfn(entry)); pte_val(entry) &= ~shared_pte_mask; - set_pte(pte, entry); + set_pte_at(vma->vm_mm, address, pte, entry); flush_tlb_page(vma, address); ret = 1; } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 454205b789d5..9df507d36e0b 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -26,7 +26,7 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); const int zero = 0; - set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL)); + set_pte_ext(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL), 0); flush_tlb_kernel_page(to); asm( "mcrr p15, 0, %1, %0, c14\n" @@ -202,3 +202,42 @@ void flush_dcache_page(struct page *page) } } EXPORT_SYMBOL(flush_dcache_page); + +/* + * Flush an anonymous page so that users of get_user_pages() + * can safely access the data. The expected sequence is: + * + * get_user_pages() + * -> flush_anon_page + * memcpy() to/from page + * if written to page, flush_dcache_page() + */ +void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr) +{ + unsigned long pfn; + + /* VIPT non-aliasing caches need do nothing */ + if (cache_is_vipt_nonaliasing()) + return; + + /* + * Write back and invalidate userspace mapping. + */ + pfn = page_to_pfn(page); + if (cache_is_vivt()) { + flush_cache_page(vma, vmaddr, pfn); + } else { + /* + * For aliasing VIPT, we can flush an alias of the + * userspace address only. + */ + flush_pfn_alias(pfn, vmaddr); + } + + /* + * Invalidate kernel mapping. No data should be contained + * in this mapping of the page. FIXME: this is overkill + * since we actually ask for a write-back and invalidate. + */ + __cpuc_flush_dcache_page(page_address(page)); +} diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index b5814b4b6f35..7760193e74cc 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -52,15 +52,18 @@ void show_mem(void) printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_online_node(node) { + pg_data_t *n = NODE_DATA(node); + struct page *map = n->node_mem_map - n->node_start_pfn; + for_each_nodebank (i,mi,node) { unsigned int pfn1, pfn2; struct page *page, *end; - pfn1 = mi->bank[i].start >> PAGE_SHIFT; - pfn2 = (mi->bank[i].size + mi->bank[i].start) >> PAGE_SHIFT; + pfn1 = __phys_to_pfn(mi->bank[i].start); + pfn2 = __phys_to_pfn(mi->bank[i].size + mi->bank[i].start); - page = NODE_MEM_MAP(node) + pfn1; - end = NODE_MEM_MAP(node) + pfn2; + page = map + pfn1; + end = map + pfn2; do { total++; diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 465440592791..0ac615c0f798 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -38,89 +38,71 @@ */ #define VM_ARM_SECTION_MAPPING 0x80000000 -static inline void -remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, - unsigned long phys_addr, pgprot_t pgprot) +static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end, + unsigned long phys_addr, pgprot_t prot) { - unsigned long end; + pte_t *pte; + + pte = pte_alloc_kernel(pmd, addr); + if (!pte) + return -ENOMEM; - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - BUG_ON(address >= end); do { if (!pte_none(*pte)) goto bad; - set_pte(pte, pfn_pte(phys_addr >> PAGE_SHIFT, pgprot)); - address += PAGE_SIZE; + set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0); phys_addr += PAGE_SIZE; - pte++; - } while (address && (address < end)); - return; + } while (pte++, addr += PAGE_SIZE, addr != end); + return 0; bad: - printk("remap_area_pte: page already exists\n"); + printk(KERN_CRIT "remap_area_pte: page already exists\n"); BUG(); } -static inline int -remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) +static inline int remap_area_pmd(pgd_t *pgd, unsigned long addr, + unsigned long end, unsigned long phys_addr, + pgprot_t prot) { - unsigned long end; - pgprot_t pgprot; - - address &= ~PGDIR_MASK; - end = address + size; - - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; + unsigned long next; + pmd_t *pmd; + int ret = 0; - phys_addr -= address; - BUG_ON(address >= end); + pmd = pmd_alloc(&init_mm, pgd, addr); + if (!pmd) + return -ENOMEM; - pgprot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | flags); do { - pte_t * pte = pte_alloc_kernel(pmd, address); - if (!pte) - return -ENOMEM; - remap_area_pte(pte, address, end - address, address + phys_addr, pgprot); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address && (address < end)); - return 0; + next = pmd_addr_end(addr, end); + ret = remap_area_pte(pmd, addr, next, phys_addr, prot); + if (ret) + return ret; + phys_addr += next - addr; + } while (pmd++, addr = next, addr != end); + return ret; } -static int -remap_area_pages(unsigned long start, unsigned long pfn, - unsigned long size, unsigned long flags) +static int remap_area_pages(unsigned long start, unsigned long pfn, + unsigned long size, unsigned long flags) { - unsigned long address = start; - unsigned long end = start + size; + unsigned long addr = start; + unsigned long next, end = start + size; unsigned long phys_addr = __pfn_to_phys(pfn); + pgprot_t prot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | + L_PTE_DIRTY | L_PTE_WRITE | flags); + pgd_t *pgd; int err = 0; - pgd_t * dir; - phys_addr -= address; - dir = pgd_offset(&init_mm, address); - BUG_ON(address >= end); + BUG_ON(addr >= end); + pgd = pgd_offset_k(addr); do { - pmd_t *pmd = pmd_alloc(&init_mm, dir, address); - if (!pmd) { - err = -ENOMEM; - break; - } - if (remap_area_pmd(pmd, address, end - address, - phys_addr + address, flags)) { - err = -ENOMEM; + next = pgd_addr_end(addr, end); + err = remap_area_pmd(pgd, addr, next, phys_addr, prot); + if (err) break; - } - - address = (address + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } while (address && (address < end)); + phys_addr += next - addr; + } while (pgd++, addr = next, addr != end); return err; } @@ -310,13 +292,16 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK)) return NULL; + size = PAGE_ALIGN(size); + area = get_vm_area(size, VM_IOREMAP); if (!area) return NULL; addr = (unsigned long)area->addr; #ifndef CONFIG_SMP - if ((((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) || + if (DOMAIN_IO == 0 && + (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) || cpu_is_xsc3()) && !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) { area->flags |= VM_ARM_SECTION_MAPPING; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b7f194af20b4..655c8376f0b5 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -154,6 +154,26 @@ static int __init noalign_setup(char *__unused) } __setup("noalign", noalign_setup); +#ifndef CONFIG_SMP +void adjust_cr(unsigned long mask, unsigned long set) +{ + unsigned long flags; + + mask &= ~CR_A; + + set &= mask; + + local_irq_save(flags); + + cr_no_alignment = (cr_no_alignment & ~mask) | set; + cr_alignment = (cr_alignment & ~mask) | set; + + set_cr((get_cr() & ~mask) | set); + + local_irq_restore(flags); +} +#endif + struct mem_types { unsigned int prot_pte; unsigned int prot_l1; @@ -294,12 +314,6 @@ static void __init build_mem_type_table(void) mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE; mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; - /* - * User pages need to be mapped with the ASID - * (iow, non-global) - */ - user_pgprot |= L_PTE_ASID; - #ifdef CONFIG_SMP /* * Mark memory with the "shared" attribute for SMP systems @@ -408,7 +422,7 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg } ptep = pte_offset_kernel(pmdp, virt); - set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot)); + set_pte_ext(ptep, pfn_pte(phys >> PAGE_SHIFT, prot), 0); } /* diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 20c1b0df75f2..50b9aed6000d 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -57,7 +57,7 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) init_pmd = pmd_offset(init_pgd, 0); init_pte = pte_offset_map_nested(init_pmd, 0); - set_pte(new_pte, *init_pte); + set_pte_ext(new_pte, *init_pte, 0); pte_unmap_nested(init_pte); pte_unmap(new_pte); } diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 289b8e6f504d..700c04d6996e 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -397,7 +397,7 @@ ENTRY(cpu_arm1020_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1020_set_pte) +ENTRY(cpu_arm1020_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -477,7 +477,7 @@ arm1020_processor_functions: .word cpu_arm1020_do_idle .word cpu_arm1020_dcache_clean_area .word cpu_arm1020_switch_mm - .word cpu_arm1020_set_pte + .word cpu_arm1020_set_pte_ext .size arm1020_processor_functions, . - arm1020_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index bed9db6ba582..1cc206ab5eae 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -381,7 +381,7 @@ ENTRY(cpu_arm1020e_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1020e_set_pte) +ENTRY(cpu_arm1020e_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -458,7 +458,7 @@ arm1020e_processor_functions: .word cpu_arm1020e_do_idle .word cpu_arm1020e_dcache_clean_area .word cpu_arm1020e_switch_mm - .word cpu_arm1020e_set_pte + .word cpu_arm1020e_set_pte_ext .size arm1020e_processor_functions, . - arm1020e_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index d2a7c1b9cab9..aff0ea08e2f8 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -358,12 +358,12 @@ ENTRY(cpu_arm1022_switch_mm) mov pc, lr /* - * cpu_arm1022_set_pte(ptep, pte) + * cpu_arm1022_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1022_set_pte) +ENTRY(cpu_arm1022_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -441,7 +441,7 @@ arm1022_processor_functions: .word cpu_arm1022_do_idle .word cpu_arm1022_dcache_clean_area .word cpu_arm1022_switch_mm - .word cpu_arm1022_set_pte + .word cpu_arm1022_set_pte_ext .size arm1022_processor_functions, . - arm1022_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 3247ce5c0177..65e43a109085 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -347,12 +347,12 @@ ENTRY(cpu_arm1026_switch_mm) mov pc, lr /* - * cpu_arm1026_set_pte(ptep, pte) + * cpu_arm1026_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1026_set_pte) +ENTRY(cpu_arm1026_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -436,7 +436,7 @@ arm1026_processor_functions: .word cpu_arm1026_do_idle .word cpu_arm1026_dcache_clean_area .word cpu_arm1026_switch_mm - .word cpu_arm1026_set_pte + .word cpu_arm1026_set_pte_ext .size arm1026_processor_functions, . - arm1026_processor_functions .section .rodata diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index ce4f9eef763c..123a7dc7a433 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -209,14 +209,14 @@ ENTRY(cpu_arm7_switch_mm) mov pc, lr /* - * Function: arm6_7_set_pte(pte_t *ptep, pte_t pte) + * Function: arm6_7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext) * Params : r0 = Address to set * : r1 = value to set * Purpose : Set a PTE and flush it out of any WB cache */ .align 5 -ENTRY(cpu_arm6_set_pte) -ENTRY(cpu_arm7_set_pte) +ENTRY(cpu_arm6_set_pte_ext) +ENTRY(cpu_arm7_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -299,7 +299,7 @@ ENTRY(arm6_processor_functions) .word cpu_arm6_do_idle .word cpu_arm6_dcache_clean_area .word cpu_arm6_switch_mm - .word cpu_arm6_set_pte + .word cpu_arm6_set_pte_ext .size arm6_processor_functions, . - arm6_processor_functions /* @@ -315,7 +315,7 @@ ENTRY(arm7_processor_functions) .word cpu_arm7_do_idle .word cpu_arm7_dcache_clean_area .word cpu_arm7_switch_mm - .word cpu_arm7_set_pte + .word cpu_arm7_set_pte_ext .size arm7_processor_functions, . - arm7_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index c04c194da785..dc763be43362 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -88,13 +88,13 @@ ENTRY(cpu_arm720_switch_mm) mov pc, lr /* - * Function: arm720_set_pte(pte_t *ptep, pte_t pte) + * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext) * Params : r0 = Address to set * : r1 = value to set * Purpose : Set a PTE and flush it out of any WB cache */ .align 5 -ENTRY(cpu_arm720_set_pte) +ENTRY(cpu_arm720_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -204,7 +204,7 @@ ENTRY(arm720_processor_functions) .word cpu_arm720_do_idle .word cpu_arm720_dcache_clean_area .word cpu_arm720_switch_mm - .word cpu_arm720_set_pte + .word cpu_arm720_set_pte_ext .size arm720_processor_functions, . - arm720_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 65cbb2851bff..75c945ed6c4d 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -344,12 +344,12 @@ ENTRY(cpu_arm920_switch_mm) mov pc, lr /* - * cpu_arm920_set_pte(ptep, pte) + * cpu_arm920_set_pte(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm920_set_pte) +ENTRY(cpu_arm920_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -423,7 +423,7 @@ arm920_processor_functions: .word cpu_arm920_do_idle .word cpu_arm920_dcache_clean_area .word cpu_arm920_switch_mm - .word cpu_arm920_set_pte + .word cpu_arm920_set_pte_ext .size arm920_processor_functions, . - arm920_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 52761b70d735..ffb751b877ff 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -348,12 +348,12 @@ ENTRY(cpu_arm922_switch_mm) mov pc, lr /* - * cpu_arm922_set_pte(ptep, pte) + * cpu_arm922_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm922_set_pte) +ENTRY(cpu_arm922_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -427,7 +427,7 @@ arm922_processor_functions: .word cpu_arm922_do_idle .word cpu_arm922_dcache_clean_area .word cpu_arm922_switch_mm - .word cpu_arm922_set_pte + .word cpu_arm922_set_pte_ext .size arm922_processor_functions, . - arm922_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 5b74339d1588..44c2c997819f 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -391,12 +391,12 @@ ENTRY(cpu_arm925_switch_mm) mov pc, lr /* - * cpu_arm925_set_pte(ptep, pte) + * cpu_arm925_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm925_set_pte) +ENTRY(cpu_arm925_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -490,7 +490,7 @@ arm925_processor_functions: .word cpu_arm925_do_idle .word cpu_arm925_dcache_clean_area .word cpu_arm925_switch_mm - .word cpu_arm925_set_pte + .word cpu_arm925_set_pte_ext .size arm925_processor_functions, . - arm925_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 8628ed29a955..5b80b6bdd0cb 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -348,12 +348,12 @@ ENTRY(cpu_arm926_switch_mm) mov pc, lr /* - * cpu_arm926_set_pte(ptep, pte) + * cpu_arm926_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm926_set_pte) +ENTRY(cpu_arm926_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -439,7 +439,7 @@ arm926_processor_functions: .word cpu_arm926_do_idle .word cpu_arm926_dcache_clean_area .word cpu_arm926_switch_mm - .word cpu_arm926_set_pte + .word cpu_arm926_set_pte_ext .size arm926_processor_functions, . - arm926_processor_functions .section ".rodata" @@ -480,7 +480,7 @@ __arm926_proc_info: b __arm926_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA .long cpu_arm926_name .long arm926_processor_functions .long v4wbi_tlb_fns diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index cd7d865c9d19..6e226e12989f 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -146,12 +146,12 @@ ENTRY(cpu_sa110_switch_mm) #endif /* - * cpu_sa110_set_pte(ptep, pte) + * cpu_sa110_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_sa110_set_pte) +ENTRY(cpu_sa110_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -222,7 +222,7 @@ ENTRY(sa110_processor_functions) .word cpu_sa110_do_idle .word cpu_sa110_dcache_clean_area .word cpu_sa110_switch_mm - .word cpu_sa110_set_pte + .word cpu_sa110_set_pte_ext .size sa110_processor_functions, . - sa110_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index b776653cc31c..9afb11d089fe 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -159,12 +159,12 @@ ENTRY(cpu_sa1100_switch_mm) #endif /* - * cpu_sa1100_set_pte(ptep, pte) + * cpu_sa1100_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_sa1100_set_pte) +ENTRY(cpu_sa1100_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -237,7 +237,7 @@ ENTRY(sa1100_processor_functions) .word cpu_sa1100_do_idle .word cpu_sa1100_dcache_clean_area .word cpu_sa1100_switch_mm - .word cpu_sa1100_set_pte + .word cpu_sa1100_set_pte_ext .size sa1100_processor_functions, . - sa1100_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index ab143557e688..9f396b4fa0b7 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -17,7 +17,7 @@ #ifndef MULTI_CPU EXPORT_SYMBOL(cpu_dcache_clean_area); -EXPORT_SYMBOL(cpu_set_pte); +EXPORT_SYMBOL(cpu_set_pte_ext); #else EXPORT_SYMBOL(processor); #endif diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index b440c8a1d345..7b1843befb9c 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -103,13 +103,14 @@ ENTRY(cpu_v6_switch_mm) mov pc, lr /* - * cpu_v6_set_pte(ptep, pte) + * cpu_v6_set_pte_ext(ptep, pte, ext) * * Set a level 2 translation table entry. * * - ptep - pointer to level 2 translation table entry * (hardware version is stored at -1024 bytes) * - pte - PTE value to store + * - ext - value for extended PTE bits * * Permissions: * YUWD APX AP1 AP0 SVC User @@ -121,33 +122,34 @@ ENTRY(cpu_v6_switch_mm) * 11x0 0 1 0 r/w r/o * 1111 0 1 1 r/w r/w */ -ENTRY(cpu_v6_set_pte) +ENTRY(cpu_v6_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version - bic r2, r1, #0x000003f0 - bic r2, r2, #0x00000003 - orr r2, r2, #PTE_EXT_AP0 | 2 + bic r3, r1, #0x000003f0 + bic r3, r3, #0x00000003 + orr r3, r3, r2 + orr r3, r3, #PTE_EXT_AP0 | 2 tst r1, #L_PTE_WRITE tstne r1, #L_PTE_DIRTY - orreq r2, r2, #PTE_EXT_APX + orreq r3, r3, #PTE_EXT_APX tst r1, #L_PTE_USER - orrne r2, r2, #PTE_EXT_AP1 - tstne r2, #PTE_EXT_APX - bicne r2, r2, #PTE_EXT_APX | PTE_EXT_AP0 + orrne r3, r3, #PTE_EXT_AP1 + tstne r3, #PTE_EXT_APX + bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0 tst r1, #L_PTE_YOUNG - biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK + biceq r3, r3, #PTE_EXT_APX | PTE_EXT_AP_MASK tst r1, #L_PTE_EXEC - orreq r2, r2, #PTE_EXT_XN + orreq r3, r3, #PTE_EXT_XN tst r1, #L_PTE_PRESENT - moveq r2, #0 + moveq r3, #0 - str r2, [r0] + str r3, [r0] mcr p15, 0, r0, c7, c10, 1 @ flush_pte #endif mov pc, lr @@ -156,7 +158,7 @@ ENTRY(cpu_v6_set_pte) cpu_v6_name: - .asciz "Some Random V6 Processor" + .asciz "ARMv6-compatible processor" .align .section ".text.init", #alloc, #execinstr @@ -207,11 +209,6 @@ __v6_setup: #endif mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ -#ifdef CONFIG_VFP - mrc p15, 0, r0, c1, c0, 2 - orr r0, r0, #(0xf << 20) - mcr p15, 0, r0, c1, c0, 2 @ Enable full access to VFP -#endif adr r5, v6_crval ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0, 0 @ read control register @@ -238,7 +235,7 @@ ENTRY(v6_processor_functions) .word cpu_v6_do_idle .word cpu_v6_dcache_clean_area .word cpu_v6_switch_mm - .word cpu_v6_set_pte + .word cpu_v6_set_pte_ext .size v6_processor_functions, . - v6_processor_functions .type cpu_arch_name, #object @@ -273,7 +270,7 @@ __v6_proc_info: b __v6_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA .long cpu_v6_name .long v6_processor_functions .long v6wbi_tlb_fns diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 1ef564d0957f..94a58455f346 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -2,7 +2,7 @@ * linux/arch/arm/mm/proc-xsc3.S * * Original Author: Matthew Gilbert - * Current Maintainer: Deepak Saxena <dsaxena@plexity.net> + * Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> * * Copyright 2004 (C) Intel Corp. * Copyright 2005 (c) MontaVista Software, Inc. @@ -357,13 +357,13 @@ ENTRY(cpu_xsc3_switch_mm) cpwait_ret lr, ip /* - * cpu_xsc3_set_pte(ptep, pte) + * cpu_xsc3_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out * */ .align 5 -ENTRY(cpu_xsc3_set_pte) +ENTRY(cpu_xsc3_set_pte_ext) str r1, [r0], #-2048 @ linux version bic r2, r1, #0xff0 @ Keep C, B bits @@ -457,7 +457,7 @@ ENTRY(xsc3_processor_functions) .word cpu_xsc3_do_idle .word cpu_xsc3_dcache_clean_area .word cpu_xsc3_switch_mm - .word cpu_xsc3_set_pte + .word cpu_xsc3_set_pte_ext .size xsc3_processor_functions, . - xsc3_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index cc1004b3e511..d29fe927ee9e 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -421,14 +421,14 @@ ENTRY(cpu_xscale_switch_mm) cpwait_ret lr, ip /* - * cpu_xscale_set_pte(ptep, pte) + * cpu_xscale_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out * * Errata 40: must set memory to write-through for user read-only pages. */ .align 5 -ENTRY(cpu_xscale_set_pte) +ENTRY(cpu_xscale_set_pte_ext) str r1, [r0], #-2048 @ linux version bic r2, r1, #0xff0 @@ -529,7 +529,7 @@ ENTRY(xscale_processor_functions) .word cpu_xscale_do_idle .word cpu_xscale_dcache_clean_area .word cpu_xscale_switch_mm - .word cpu_xscale_set_pte + .word cpu_xscale_set_pte_ext .size xscale_processor_functions, . - xscale_processor_functions .section ".rodata" @@ -708,7 +708,7 @@ __8032x_proc_info: .type __8033x_proc_info,#object __8033x_proc_info: .long 0x69054010 - .long 0xffffff30 + .long 0xfffffd30 .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ec752e16d618..f2dc363de66b 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -113,7 +113,7 @@ endchoice config OMAP_SERIAL_WAKE bool "Enable wake-up events for serial ports" - depends OMAP_MUX + depends on OMAP_MUX default y help Select this option if you want to have your system wake up diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 8bcb838e5444..bd78058b7178 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Thu Dec 7 17:19:20 2006 +# Last update: Tue Jan 16 16:52:56 2007 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1219,3 +1219,26 @@ zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207 hitrack MACH_HITRACK HITRACK 1208 syme1 MACH_SYME1 SYME1 1209 syhl1 MACH_SYHL1 SYHL1 1210 +empca400 MACH_EMPCA400 EMPCA400 1211 +em7210 MACH_EM7210 EM7210 1212 +htchermes MACH_HTCHERMES HTCHERMES 1213 +eti_c1 MACH_ETI_C1 ETI_C1 1214 +mach_dep2410 MACH_MACH_DEP2410 MACH_DEP2410 1215 +ac100 MACH_AC100 AC100 1216 +sneetch MACH_SNEETCH SNEETCH 1217 +studentmate MACH_STUDENTMATE STUDENTMATE 1218 +zir2410 MACH_ZIR2410 ZIR2410 1219 +zir2413 MACH_ZIR2413 ZIR2413 1220 +dlonip3 MACH_DLONIP3 DLONIP3 1221 +instream MACH_INSTREAM INSTREAM 1222 +ambarella MACH_AMBARELLA AMBARELLA 1223 +nevis MACH_NEVIS NEVIS 1224 +htc_trinity MACH_HTC_TRINITY HTC_TRINITY 1225 +ql202b MACH_QL202B QL202B 1226 +vpac270 MACH_VPAC270 VPAC270 1227 +rd129 MACH_RD129 RD129 1228 +htcwizard MACH_HTCWIZARD HTCWIZARD 1229 +xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230 +tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231 +zylonite MACH_ZYLONITE ZYLONITE 1233 +gene1270 MACH_GENE1270 GENE1270 1234 diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 7b595547c1c8..ca2a5ad19ea6 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -25,6 +25,7 @@ do_vfp: enable_irq ldr r4, .LCvfp + ldr r11, [r10, #TI_CPU] @ CPU number add r10, r10, #TI_VFPSTATE @ r10 = workspace ldr pc, [r4] @ call VFP entry point diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index f2797896e6d5..54a2ad6d9ca2 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -370,3 +370,7 @@ struct op { u32 (* const fn)(int dd, int dn, int dm, u32 fpscr); u32 flags; }; + +#ifdef CONFIG_SMP +extern void vfp_save_state(void *location, u32 fpexc); +#endif diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index e51e6679c402..d4b7b229631d 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -65,6 +65,7 @@ @ r2 = faulted PC+4 @ r9 = successful return @ r10 = vfp_state union +@ r11 = CPU number @ lr = failure return .globl vfp_support_entry @@ -79,7 +80,7 @@ vfp_support_entry: DBGSTR1 "enable %x", r10 ldr r3, last_VFP_context_address orr r1, r1, #FPEXC_ENABLE @ user FPEXC has the enable bit set - ldr r4, [r3] @ last_VFP_context pointer + ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer bic r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled cmp r4, r10 beq check_for_exception @ we are returning to the same @@ -91,7 +92,9 @@ vfp_support_entry: @ exceptions, so we can get at the @ rest of it +#ifndef CONFIG_SMP @ Save out the current registers to the old thread state + @ No need for SMP since this is not done lazily DBGSTR1 "save old state %p", r4 cmp r4, #0 @@ -105,10 +108,11 @@ vfp_support_entry: stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 @ and point r4 at the word at the @ start of the register dump +#endif no_old_VFP_process: DBGSTR1 "load state %p", r10 - str r10, [r3] @ update the last_VFP_context pointer + str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer @ Load the saved state back into the VFP VFPFLDMIA r10 @ reload the working registers while @ FPEXC is in a safe state @@ -162,6 +166,24 @@ process_exception: @ required. If not, the user code will @ retry the faulted instruction +#ifdef CONFIG_SMP + .globl vfp_save_state + .type vfp_save_state, %function +vfp_save_state: + @ Save the current VFP state + @ r0 - save location + @ r1 - FPEXC + DBGSTR1 "save VFP state %p", r0 + VFPFMRX r2, FPSCR @ current status + VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards) + tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read? + VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading + @ nonexistant reg on rev0 + VFPFSTMIA r0 @ save the working registers + stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2 + mov pc, lr +#endif + last_VFP_context_address: .word last_VFP_context diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index f08eafbddcc1..f1e5951dc721 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -28,7 +28,7 @@ void vfp_testing_entry(void); void vfp_support_entry(void); void (*vfp_vector)(void) = vfp_testing_entry; -union vfp_state *last_VFP_context; +union vfp_state *last_VFP_context[NR_CPUS]; /* * Dual-use variable. @@ -41,13 +41,35 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { struct thread_info *thread = v; union vfp_state *vfp; + __u32 cpu = thread->cpu; if (likely(cmd == THREAD_NOTIFY_SWITCH)) { + u32 fpexc = fmrx(FPEXC); + +#ifdef CONFIG_SMP + /* + * On SMP, if VFP is enabled, save the old state in + * case the thread migrates to a different CPU. The + * restoring is done lazily. + */ + if ((fpexc & FPEXC_ENABLE) && last_VFP_context[cpu]) { + vfp_save_state(last_VFP_context[cpu], fpexc); + last_VFP_context[cpu]->hard.cpu = cpu; + } + /* + * Thread migration, just force the reloading of the + * state on the new CPU in case the VFP registers + * contain stale data. + */ + if (thread->vfpstate.hard.cpu != cpu) + last_VFP_context[cpu] = NULL; +#endif + /* * Always disable VFP so we can lazily save/restore the * old state. */ - fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); + fmxr(FPEXC, fpexc & ~FPEXC_ENABLE); return NOTIFY_DONE; } @@ -68,8 +90,8 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) } /* flush and release case: Per-thread VFP cleanup. */ - if (last_VFP_context == vfp) - last_VFP_context = NULL; + if (last_VFP_context[cpu] == vfp) + last_VFP_context[cpu] = NULL; return NOTIFY_DONE; } @@ -263,13 +285,36 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) if (exceptions) vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); } - + +static void vfp_enable(void *unused) +{ + u32 access = get_copro_access(); + + /* + * Enable full access to VFP (cp10 and cp11) + */ + set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); +} + +#include <linux/smp.h> + /* * VFP support code initialisation. */ static int __init vfp_init(void) { unsigned int vfpsid; + unsigned int cpu_arch = cpu_architecture(); + u32 access = 0; + + if (cpu_arch >= CPU_ARCH_ARMv6) { + access = get_copro_access(); + + /* + * Enable full access to VFP (cp10 and cp11) + */ + set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); + } /* * First check that there is a VFP that we can use. @@ -277,13 +322,22 @@ static int __init vfp_init(void) * we just need to read the VFPSID register. */ vfpsid = fmrx(FPSID); + barrier(); printk(KERN_INFO "VFP support v0.3: "); if (VFP_arch) { printk("not present\n"); + + /* + * Restore the copro access register. + */ + if (cpu_arch >= CPU_ARCH_ARMv6) + set_copro_access(access); } else if (vfpsid & FPSID_NODOUBLE) { printk("no double precision support\n"); } else { + smp_call_function(vfp_enable, NULL, 1, 1); + VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT; /* Extract the architecture version */ printk("implementor %02x architecture %d part %02x variant %x rev %x\n", (vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT, @@ -291,9 +345,16 @@ static int __init vfp_init(void) (vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT, (vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT, (vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT); + vfp_vector = vfp_support_entry; thread_register_notifier(&vfp_notifier_block); + + /* + * We detected VFP, and the support code is + * in place; report VFP support to userspace. + */ + elf_hwcap |= HWCAP_VFP; } return 0; } |
