diff options
Diffstat (limited to 'arch/arm')
539 files changed, 11549 insertions, 16221 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a920f2c422e9..2277f9530b00 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -5,8 +5,9 @@ config ARM select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_WANT_IPC_PARSE_VERSION + select BUILDTIME_EXTABLE_SORT if MMU select CPU_PM if (SUSPEND || CPU_IDLE) - select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN + select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IRQ_PROBE @@ -21,6 +22,7 @@ config ARM select HAVE_AOUT select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT select HAVE_C_RECORDMCOUNT @@ -55,6 +57,7 @@ config ARM select SYS_SUPPORTS_APM_EMULATION select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND select MODULES_USE_ELF_REL + select CLONE_BACKWARDS help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -284,8 +287,8 @@ config ARCH_INTEGRATOR select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select PLAT_VERSATILE - select PLAT_VERSATILE_FPGA_IRQ select SPARSE_IRQ + select VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. @@ -318,7 +321,7 @@ config ARCH_VERSATILE select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_CLOCK - select PLAT_VERSATILE_FPGA_IRQ + select VERSATILE_FPGA_IRQ help This enables support for ARM Ltd Versatile board. @@ -330,13 +333,15 @@ config ARCH_AT91 select IRQ_DOMAIN select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD + select PINCTRL + select PINCTRL_AT91 if USE_OF help This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. config ARCH_BCM2835 bool "Broadcom BCM2835 family" - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_ERRATA_411920 select ARM_TIMER_SP804 @@ -344,7 +349,10 @@ config ARCH_BCM2835 select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS + select GENERIC_GPIO select MULTI_IRQ_HANDLER + select PINCTRL + select PINCTRL_BCM2835 select SPARSE_IRQ select USE_OF help @@ -364,11 +372,16 @@ config ARCH_CNS3XXX config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" + select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select AUTO_ZRELADDR select CLKDEV_LOOKUP select COMMON_CLK select CPU_ARM720T + select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H + select SPARSE_IRQ help Support for Cirrus Logic 711x/721x/731x based boards. @@ -536,6 +549,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select GENERIC_CLOCKEVENTS select PCI + select PCI_QUIRKS select PINCTRL select PINCTRL_KIRKWOOD select PLAT_ORION_LEGACY @@ -577,6 +591,7 @@ config ARCH_MMP select GPIO_PXA select IRQ_DOMAIN select NEED_MACH_GPIO_H + select PINCTRL select PLAT_PXA select SPARSE_IRQ help @@ -635,6 +650,7 @@ config ARCH_TEGRA select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select SPARSE_IRQ select USE_OF help This enables support for NVIDIA Tegra based systems (Tegra APX, @@ -876,6 +892,7 @@ config ARCH_U8500 select GENERIC_CLOCKEVENTS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select SPARSE_IRQ help Support for ST-Ericsson's Ux500 architecture @@ -890,11 +907,13 @@ config ARCH_NOMADIK select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_STN8815 + select SPARSE_IRQ help Support for the Nomadik platform by ST-Ericsson config PLAT_SPEAR bool "ST SPEAr" + select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP @@ -932,7 +951,7 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1/2/3/4). -config ARCH_VT8500 +config ARCH_VT8500_SINGLE bool "VIA/WonderMedia 85xx" select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB @@ -942,22 +961,12 @@ config ARCH_VT8500 select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select USE_OF help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. -config ARCH_ZYNQ - bool "Xilinx Zynq ARM Cortex A9 Platform" - select ARM_AMBA - select ARM_GIC - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS - select ICST - select MIGHT_HAVE_CACHE_L2X0 - select USE_OF - help - Support for Xilinx Zynq ARM Cortex A9 Platform endchoice menu "Multiple platform selection" @@ -1013,6 +1022,8 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-at91/Kconfig" +source "arch/arm/mach-bcm/Kconfig" + source "arch/arm/mach-clps711x/Kconfig" source "arch/arm/mach-cns3xxx/Kconfig" @@ -1056,7 +1067,6 @@ source "arch/arm/mach-mxs/Kconfig" source "arch/arm/mach-netx/Kconfig" source "arch/arm/mach-nomadik/Kconfig" -source "arch/arm/plat-nomadik/Kconfig" source "arch/arm/plat-omap/Kconfig" @@ -1104,6 +1114,8 @@ source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-shmobile/Kconfig" +source "arch/arm/mach-sunxi/Kconfig" + source "arch/arm/mach-prima2/Kconfig" source "arch/arm/mach-tegra/Kconfig" @@ -1117,8 +1129,12 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" +source "arch/arm/mach-vt8500/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" +source "arch/arm/mach-zynq/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 00e9a53888ba..661030d6bc6c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -347,6 +347,17 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_S3C_UART3 + depends on PLAT_SAMSUNG && ARCH_EXYNOS + bool "Use S3C UART 3 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 3. The port must have been initialised + by the boot-loader before use. + + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -354,6 +365,27 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. + config DEBUG_SUNXI_UART0 + bool "Kernel low-level debugging messages via sunXi UART0" + depends on ARCH_SUNXI + help + Say Y here if you want kernel low-level debugging support + on Allwinner A1X based platforms on the UART0. + + config DEBUG_SUNXI_UART1 + bool "Kernel low-level debugging messages via sunXi UART1" + depends on ARCH_SUNXI + help + Say Y here if you want kernel low-level debugging support + on Allwinner A1X based platforms on the UART1. + + config DEBUG_TEGRA_UART + depends on ARCH_TEGRA + bool "Use Tegra UART for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -427,6 +459,36 @@ config DEBUG_IMX6Q_UART_PORT Choose UART port on which kernel low-level debug messages should be output. +choice + prompt "Low-level debug console UART" + depends on DEBUG_LL && DEBUG_TEGRA_UART + + config TEGRA_DEBUG_UART_AUTO_ODMDATA + bool "Via ODMDATA" + help + Automatically determines which UART to use for low-level debug based + on the ODMDATA value. This value is part of the BCT, and is written + to the boot memory device using nvflash, or other flashing tool. + When bits 19:18 are 3, then bits 17:15 indicate which UART to use; + 0/1/2/3/4 are UART A/B/C/D/E. + + config TEGRA_DEBUG_UARTA + bool "UART A" + + config TEGRA_DEBUG_UARTB + bool "UART B" + + config TEGRA_DEBUG_UARTC + bool "UART C" + + config TEGRA_DEBUG_UARTD + bool "UART D" + + config TEGRA_DEBUG_UARTE + bool "UART E" + +endchoice + config DEBUG_LL_INCLUDE string default "debug/icedcc.S" if DEBUG_ICEDCC @@ -441,8 +503,11 @@ config DEBUG_LL_INCLUDE default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/socfpga.S" if DEBUG_SOCFPGA_UART + default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 + default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" config EARLY_PRINTK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 97252d86a701..30c443c406f3 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -32,6 +32,7 @@ KBUILD_DEFCONFIG := versatile_defconfig # defines filename extension depending memory management type. ifeq ($(CONFIG_MMU),) MMUEXT := -nommu +KBUILD_CFLAGS += $(call cc-option,-mno-unaligned-access) endif ifeq ($(CONFIG_FRAME_POINTER),y) @@ -137,6 +138,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 +machine-$(CONFIG_ARCH_BCM) += bcm machine-$(CONFIG_ARCH_BCM2835) += bcm2835 machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx @@ -193,13 +195,13 @@ machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx machine-$(CONFIG_MACH_SPEAR600) += spear6xx machine-$(CONFIG_ARCH_ZYNQ) += zynq +machine-$(CONFIG_ARCH_SUNXI) += sunxi # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_ARCH_S3C64XX) += samsung plat-$(CONFIG_PLAT_IOP) += iop -plat-$(CONFIG_PLAT_NOMADIK) += nomadik plat-$(CONFIG_PLAT_ORION) += orion plat-$(CONFIG_PLAT_PXA) += pxa plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung @@ -290,10 +292,10 @@ zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ %.dtb: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ dtbs: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs # We use MRPROPER_FILES and CLEAN_FILES now archclean: diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9137df539b61..abfce280f57b 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -15,8 +15,6 @@ ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif -include $(srctree)/arch/arm/boot/dts/Makefile - # Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR @@ -59,16 +57,6 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE endif -targets += $(dtb-y) - -# Rule to build device tree blobs -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) - -clean-files := *.dtb - ifneq ($(LOADADDR),) UIMAGE_LOADADDR=$(LOADADDR) else diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 537208f22e56..5cad8a6dadb0 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -45,11 +45,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y) OBJS += head-shark.o ofw-shark.o endif -ifeq ($(CONFIG_ARCH_P720T),y) -# Borrow this code from SA1100 -OBJS += head-sa1100.o -endif - ifeq ($(CONFIG_ARCH_SA1100),y) OBJS += head-sa1100.o endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 90275f036cd1..49ca86e37b8d 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -652,6 +652,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size mov pc, lr ENDPROC(__setup_mmu) +@ Enable unaligned access on v6, to allow better code generation +@ for the decompressor C code: +__armv6_mmu_cache_on: + mrc p15, 0, r0, c1, c0, 0 @ read SCTLR + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + mcr p15, 0, r0, c1, c0, 0 @ write SCTLR + b __armv4_mmu_cache_on + __arm926ejs_mmu_cache_on: #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mov r0, #4 @ put dcache in WT mode @@ -694,6 +703,9 @@ __armv7_mmu_cache_on: bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + @ (needed for ARM1176) #ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables @@ -914,7 +926,7 @@ proc_types: .word 0x0007b000 @ ARMv6 .word 0x000ff000 - W(b) __armv4_mmu_cache_on + W(b) __armv6_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv6_mmu_cache_flush diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 89dcc14f1931..2af359cfe985 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,22 +1,39 @@ ifeq ($(CONFIG_OF),y) -dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ - at91sam9263ek.dtb \ - at91sam9g20ek_2mmc.dtb \ - at91sam9g20ek.dtb \ - at91sam9g25ek.dtb \ - at91sam9m10g45ek.dtb \ - at91sam9n12ek.dtb \ - ethernut5.dtb \ - evk-pro3.dtb \ - kizbox.dtb \ - tny_a9260.dtb \ - tny_a9263.dtb \ - tny_a9g20.dtb \ - usb_a9260.dtb \ - usb_a9263.dtb \ - usb_a9g20.dtb +# Keep at91 dtb files sorted alphabetically for each SoC +# rm9200 +dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb +# sam9260 +dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb +dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb +dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb +dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb +# sam9263 +dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb +# sam9g20 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb +dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb +# sam9g45 +dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb +dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb +# sam9n12 +dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb +# sam9x5 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ @@ -25,10 +42,13 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ + exynos5250-smdk5250.dtb \ + exynos5440-ssdk5440.dtb \ exynos4412-smdk4412.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb -dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ + ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb @@ -100,13 +120,16 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ - sh73a0-kzm9g.dtb + sh73a0-kzm9g.dtb \ + sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear310-evb.dtb \ spear320-evb.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \ + sun5i-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ @@ -128,4 +151,12 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8650-mid.dtb dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb +targets += dtbs endif + +# *.dtb used to be generated in the directory above. Clean out the +# old build results so people don't accidentally use them. +dtbs: $(addprefix $(obj)/, $(dtb-y)) + $(Q)rm -f $(obj)/../*.dtb + +clean-files := *.dtb diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 2c338889df1b..11b240c5d323 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -128,3 +128,11 @@ }; }; }; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 9f65f17ebdf8..d6496440fcea 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -236,3 +236,11 @@ }; }; }; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 20a3f29a6bfe..c2f14e875eb6 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -338,5 +338,52 @@ power = <250>; ti,hwmods = "usb_otg_hs"; }; + + mac: ethernet@4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + cpts_active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x4a100000 0x800 + 0x4a101200 0x100>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges; + + davinci_mdio: mdio@4a101000 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x4a101000 0x100>; + }; + + cpsw_emac0: slave@4a100200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@4a100300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts new file mode 100644 index 000000000000..74d92cd29d87 --- /dev/null +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -0,0 +1,178 @@ +/* + * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 only. + */ + +/dts-v1/; +/include/ "at91sam9260.dtsi" + +/ { + model = "Somfy Animeo IP"; + compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9"; + + aliases { + serial0 = &usart1; + serial1 = &usart2; + serial2 = &usart0; + serial3 = &dbgu; + serial4 = &usart3; + serial5 = &uart0; + serial6 = &uart1; + }; + + chosen { + linux,stdout-path = &usart2; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart1: serial@fffb4000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart2: serial@fffb8000 { + pinctrl-0 = <&pinctrl_usart2>; + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>; + phy-mode = "mii"; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = <&pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x8000>; + }; + + barebox@8000 { + label = "barebox"; + reg = <0x8000 0x40000>; + }; + + bareboxenv@48000 { + label = "bareboxenv"; + reg = <0x48000 0x8000>; + }; + + user_block@0x50000 { + label = "user_block"; + reg = <0x50000 0xb0000>; + }; + + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x1b0000>; + }; + + root@2b0000 { + label = "root"; + reg = <0x2b0000 0x1D50000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + atmel,vbus-gpio = <&pioB 15 1>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green { + label = "power_green"; + gpios = <&pioC 17 0>; + linux,default-trigger = "heartbeat"; + }; + + power_red { + label = "power_red"; + gpios = <&pioA 2 0>; + }; + + tx_green { + label = "tx_green"; + gpios = <&pioC 19 0>; + }; + + tx_red { + label = "tx_red"; + gpios = <&pioC 18 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + keyswitch_in { + label = "keyswitch_in"; + gpios = <&pioB 1 0>; + linux,code = <28>; + gpio-key,wakeup; + }; + + error_in { + label = "error_in"; + gpios = <&pioB 2 0>; + linux,code = <29>; + gpio-key,wakeup; + }; + + btn { + label = "btn"; + gpios = <&pioC 23 0>; + linux,code = <31>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi new file mode 100644 index 000000000000..e154f242c680 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -0,0 +1,349 @@ +/* + * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>, + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Based on at91sam9260.dtsi + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91RM9200 family SoC"; + compatible = "atmel,at91rm9200"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + cpus { + cpu@0 { + compatible = "arm,arm920t"; + }; + }; + + memory { + reg = <0x20000000 0x04000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <25 26 27 28 29 30 31>; + }; + + ramc0: ramc@ffffff00 { + compatible = "atmel,at91rm9200-sdramc"; + reg = <0xffffff00 0x100>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + st: timer@fffffd00 { + compatible = "atmel,at91rm9200-st"; + reg = <0xfffffd00 0x100>; + interrupts = <1 4 7>; + }; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 4 0 18 4 0 19 4 0>; + }; + + tcb1: timer@fffa4000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa4000 0x100>; + interrupts = <20 4 0 21 4 0 22 4 0>; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffffffff /* pioA */ + 0xffffffff 0x083fffff /* pioB */ + 0xffff3fff 0x00000000 /* pioC */ + 0x03ff87ff 0x0fffff80 /* pioD */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 30 0x1 0x0 /* PA30 periph A */ + 0 31 0x1 0x1>; /* PA31 periph with pullup */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0>; /* PA18 periph A */ + }; + + pinctrl_uart0_rts: uart0_rts-0 { + atmel,pins = + <0 20 0x1 0x0>; /* PA20 periph A */ + }; + + pinctrl_uart0_cts: uart0_cts-0 { + atmel,pins = + <0 21 0x1 0x0>; /* PA21 periph A */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <1 20 0x1 0x1 /* PB20 periph A with pullup */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + + pinctrl_uart1_rts: uart1_rts-0 { + atmel,pins = + <1 24 0x1 0x0>; /* PB24 periph A */ + }; + + pinctrl_uart1_cts: uart1_cts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 25 0x1 0x0>; /* PB25 periph A */ + }; + + pinctrl_uart1_dcd: uart1_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_uart1_ri: uart1_ri-0 { + atmel,pins = + <1 18 0x1 0x0>; /* PB18 periph A */ + }; + }; + + uart2 { + pinctrl_uart2: uart2-0 { + atmel,pins = + <0 22 0x1 0x0 /* PA22 periph A */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 30 0x2 0x0>; /* PA30 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 31 0x2 0x0>; /* PA31 periph B */ + }; + }; + + uart3 { + pinctrl_uart3: uart3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 6 0x2 0x0>; /* PA6 periph B */ + }; + + pinctrl_uart3_rts: uart3_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart3_cts: uart3_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ + 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "disabled"; + }; + + usart0: serial@fffc0000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc0000 0x200>; + interrupts = <6 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + usart1: serial@fffc4000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc4000 0x200>; + interrupts = <7 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + + usart2: serial@fffc8000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc8000 0x200>; + interrupts = <8 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; + }; + + usart3: serial@fffcc000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffcc000 0x200>; + interrupts = <23 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; + }; + + usb1: gadget@fffb0000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffb0000 0x4000>; + interrupts = <11 4 2>; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-ecc-mode = "soft"; + gpios = <&pioC 2 0 + 0 + &pioB 1 0 + >; + status = "disabled"; + }; + + usb0: ohci@00300000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00300000 0x100000>; + interrupts = <23 4 2>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts new file mode 100644 index 000000000000..8aa48931e0a2 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -0,0 +1,79 @@ +/* + * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit + * + * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91rm9200.dtsi" + +/ { + model = "Atmel AT91RM9200 evaluation kit"; + compatible = "atmel,at91rm9200ek", "atmel,at91rm9200"; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart1: serial@fffc4000 { + pinctrl-0 = + <&pinctrl_uart1 + &pinctrl_uart1_rts + &pinctrl_uart1_cts + &pinctrl_uart1_dtr_dsr + &pinctrl_uart1_dcd + &pinctrl_uart1_ri>; + status = "okay"; + }; + + usb1: gadget@fffb0000 { + atmel,vbus-gpio = <&pioD 4 0>; + status = "okay"; + }; + }; + + usb0: ohci@00300000 { + num-ports = <2>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds2 { + label = "green"; + gpios = <&pioB 0 0x1>; + linux,default-trigger = "mmc0"; + }; + + ds4 { + label = "yellow"; + gpios = <&pioB 1 0x1>; + linux,default-trigger = "heartbeat"; + }; + + ds6 { + label = "red"; + gpios = <&pioB 2 0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index bfb5bb6528b5..c528b4b429b9 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -21,8 +21,8 @@ serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; - serial5 = &usart4; - serial6 = &usart5; + serial5 = &uart0; + serial6 = &uart1; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; @@ -98,40 +98,250 @@ interrupts = <26 4 0 27 4 0 28 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc00c3b /* pioA */ + 0xffffffff 0x7fff3ccf /* pioB */ + 0xffffffff 0x007fffff /* pioC */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x1>; /* PB15 periph with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 27 0x1 0x0>; /* PB27 periph A */ + }; + + pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { + atmel,pins = + <1 24 0x1 0x0 /* PB24 periph A */ + 1 22 0x1 0x0>; /* PB22 periph A */ + }; + + pinctrl_usart0_dcd: usart0_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_usart0_ri: usart0_ri-0 { + atmel,pins = + <1 25 0x1 0x0>; /* PB25 periph A */ + }; + }; - pioC: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <2 6 0x1 0x1 /* PB6 periph A with pullup */ + 2 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <1 28 0x1 0x0>; /* PB28 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <1 29 0x1 0x0>; /* PB29 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB8 periph A with pullup */ + 1 9 0x1 0x0>; /* PB9 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 10 0x1 0x1 /* PB10 periph A with pullup */ + 2 11 0x1 0x0>; /* PB11 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PB8 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 10 0x2 0x0>; /* PB10 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 31 0x2 0x1 /* PA31 periph B with pullup */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 12 0x1 0x1 /* PB12 periph A with pullup */ + 2 13 0x1 0x0>; /* PB13 periph A */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0 /* PA19 periph A */ + 0 20 0x1 0x0 /* PA20 periph A */ + 0 21 0x1 0x0>; /* PA21 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 22 0x2 0x0 /* PA22 periph B */ + 0 23 0x2 0x0 /* PA23 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + + pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { + atmel,pins = + <0 10 0x2 0x0 /* PA10 periph B */ + 0 11 0x2 0x0 /* PA11 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 1 0x2 0x1 /* PA1 periph B with pullup */ + 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 4 0x2 0x1 /* PA4 periph B with pullup */ + 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -141,6 +351,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -150,6 +362,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -159,6 +373,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -168,24 +384,30 @@ interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; - usart4: serial@fffd4000 { + uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; status = "disabled"; }; - usart5: serial@fffd8000 { + uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "disabled"; }; @@ -193,6 +415,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -212,6 +436,15 @@ status = "disabled"; }; + mmc0: mmc@fffa8000 { + compatible = "atmel,hsmci"; + reg = <0xfffa8000 0x600>; + interrupts = <9 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; @@ -263,6 +496,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 13 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index ff5461278c03..00485e1dff93 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -89,60 +89,243 @@ reg = <0xfffffd10 0x10>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B */ + 0xfffffffb 0xffffe07f /* pioA */ + 0x0007ffff 0x39072fff /* pioB */ + 0xffffffff 0x3ffffff8 /* pioC */ + 0xfffffbff 0xffffffff /* pioD */ + 0xffe00fff 0xfbfcff00 /* pioE */ + >; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <2 30 0x1 0x0 /* PC30 periph A */ + 2 31 0x1 0x1>; /* PC31 periph with pullup */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 26 0x1 0x1 /* PA26 periph A with pullup */ + 0 27 0x1 0x0>; /* PA27 periph A */ + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 28 0x1 0x0>; /* PA28 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 29 0x1 0x0>; /* PA29 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <3 0 0x1 0x1 /* PD0 periph A with pullup */ + 3 1 0x1 0x0>; /* PD1 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 7 0x2 0x0>; /* PD7 periph B */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PD8 periph B */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <3 2 0x1 0x1 /* PD2 periph A with pullup */ + 3 3 0x1 0x0>; /* PD3 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <3 5 0x2 0x0>; /* PD5 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <4 6 0x2 0x0>; /* PD6 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ + 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <2 25 0x2 0x0 /* PC25 periph B */ + 4 21 0x1 0x0 /* PE21 periph A */ + 4 23 0x1 0x0 /* PE23 periph A */ + 4 24 0x1 0x0 /* PE24 periph A */ + 4 25 0x1 0x0 /* PE25 periph A */ + 4 26 0x1 0x0 /* PE26 periph A */ + 4 27 0x1 0x0 /* PE27 periph A */ + 4 28 0x1 0x0 /* PE28 periph A */ + 4 29 0x1 0x0 /* PE29 periph A */ + 4 30 0x1 0x0>; /* PE30 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 22 0x2 0x0 /* PC22 periph B */ + 2 23 0x2 0x0 /* PC23 periph B */ + 2 24 0x2 0x0 /* PC24 periph B */ + 2 25 0x2 0x0 /* PC25 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 4 22 0x2 0x0>; /* PE22 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 12 0x1 0x0>; /* PA12 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_clk: mmc1_clk-0 { + atmel,pins = + <0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { + atmel,pins = + <0 21 0x1 0x1 /* PA21 periph A with pullup */ + 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { + atmel,pins = + <0 23 0x1 0x1 /* PA23 periph A with pullup */ + 0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -152,6 +335,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -161,6 +346,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -170,6 +357,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -177,6 +366,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -196,6 +387,24 @@ status = "disabled"; }; + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <10 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fff84000 { + compatible = "atmel,hsmci"; + reg = <0xfff84000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + watchdog@fffffd40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; @@ -212,6 +421,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioA 22 0 &pioD 15 0 0 diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index f86ac4b609fc..1eb08728f527 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -38,6 +38,10 @@ }; usart0: serial@fff8c000 { + pinctrl-0 = < + &pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; status = "okay"; }; @@ -50,6 +54,31 @@ atmel,vbus-gpio = <&pioA 25 0>; status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 18 0>; + wp-gpios = <&pioE 19 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ + 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi new file mode 100644 index 000000000000..fbe7a7089c2a --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G15 SoC"; + compatible = "atmel, at91sam9g15, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0x00000000 /* pioA */ + 0x00040000 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts new file mode 100644 index 000000000000..86dd3f6d938f --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g15.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index f1b2e148ac8c..66467b113126 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -12,6 +12,32 @@ model = "Atmel at91sam9g20ek 2 mmc"; compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9"; + ahb { + apb{ + mmc0: mmc@fffa8000 { + /* clk already mux wuth slot0 */ + pinctrl-0 = < + &pinctrl_board_mmc0_slot0 + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioC 2 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot0 { + pinctrl_board_mmc0_slot0: mmc0_slot0-board { + atmel,pins = + <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index e6391a4e6649..32a500a0e481 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -35,6 +35,13 @@ }; usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; status = "okay"; }; @@ -51,6 +58,29 @@ atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi new file mode 100644 index 000000000000..05a718fb83c4 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G25 SoC"; + compatible = "atmel, at91sam9g25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000001c /* pioA */ + 0x0007ffff 0x8000fe3f 0x00000000 /* pioB */ + 0x80000000 0x07c0ffff 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 877c08f06763..c5ab16fba059 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,55 +7,10 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x5.dtsi" -/include/ "at91sam9x5cm.dtsi" +/include/ "at91sam9g25.dtsi" +/include/ "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; - - chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@f801c000 { - status = "okay"; - }; - - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - i2c0: i2c@f8010000 { - status = "okay"; - }; - - i2c1: i2c@f8014000 { - status = "okay"; - }; - - i2c2: i2c@f8018000 { - status = "okay"; - }; - }; - - usb0: ohci@00600000 { - status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 - >; - }; - - usb1: ehci@00700000 { - status = "okay"; - }; - }; }; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi new file mode 100644 index 000000000000..f9d14a722794 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G35 SoC"; + compatible = "atmel, at91sam9g35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts new file mode 100644 index 000000000000..95944bdd798d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G35-EK"; + compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index a98c00a234eb..485fc395efc6 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -108,60 +108,243 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc003ff /* pioA */ + 0xffffffff 0x800f8f00 /* pioB */ + 0xffffffff 0x00000e00 /* pioC */ + 0xffffffff 0xff0c1381 /* pioD */ + 0xffffffff 0x81ffff81 /* pioE */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0>; /* PB13 periph A */ + }; + }; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 19 0x1 0x1 /* PB19 periph A with pullup */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 17 0x2 0x0>; /* PB17 periph B */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 15 0x2 0x0>; /* PB15 periph B */ + }; + }; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + uart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <1 4 0x1 0x1 /* PB4 periph A with pullup */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 16 0x1 0x0>; /* PD16 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 17 0x1 0x0>; /* PD17 periph A */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 6 0x1 0x1 /* PB6 periph A with pullup */ + 1 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <2 9 0x2 0x0>; /* PC9 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <2 11 0x2 0x0>; /* PC11 periph B */ + }; + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB9 periph A with pullup */ + 1 9 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <0 23 0x2 0x0>; /* PA23 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <0 24 0x2 0x0>; /* PA24 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 10 0x1 0x0 /* PA10 periph A */ + 0 11 0x1 0x0 /* PA11 periph A */ + 0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0>; /* PA19 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 6 0x2 0x0 /* PA6 periph B */ + 0 7 0x2 0x0 /* PA7 periph B */ + 0 8 0x2 0x0 /* PA8 periph B */ + 0 9 0x2 0x0 /* PA9 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0 /* PA29 periph B */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 0 0x1 0x0 /* PA0 periph A */ + 0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 31 0x1 0x0 /* PA31 periph A */ + 0 22 0x1 0x1 /* PA22 periph A with pullup */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1 /* PA25 periph A with pullup */ + 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { + atmel,pins = + <0 27 0x1 0x1 /* PA27 periph A with pullup */ + 0 28 0x1 0x1 /* PA28 periph A with pullup */ + 0 29 0x1 0x1 /* PA29 periph A with pullup */ + 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -171,6 +354,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -180,6 +365,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -189,6 +376,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -198,6 +387,8 @@ interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -205,6 +396,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <25 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -263,6 +456,24 @@ }; }; + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fffd0000 { + compatible = "atmel,hsmci"; + reg = <0xfffd0000 0x600>; + interrupts = <29 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + watchdog@fffffd40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; @@ -279,6 +490,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 8 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 15e1dd43f625..20c31913c270 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -39,6 +39,10 @@ }; usart1: serial@fff90000 { + pinctrl-0 = + <&pinctrl_usart1 + &pinctrl_usart1_rts + &pinctrl_usart1_cts>; status = "okay"; }; @@ -54,6 +58,50 @@ i2c1: i2c@fff88000 { status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 10 0>; + }; + }; + + mmc1: mmc@fffd0000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 11 0>; + wp-gpios = <&pioD 29 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ + 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 82508d68aa7e..e9efb34f4379 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -84,6 +84,15 @@ reg = <0xfffffe10 0x10>; }; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -102,50 +111,186 @@ interrupts = <20 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe07983 0x00000000 /* pioA */ + 0x00040000 0x00047e0f 0x00000000 /* pioB */ + 0xfdffffff 0x07c00000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph with pullup */ + }; + }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x0>; /* PA0 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 7 0x1 0x0>; /* PA7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 23 0x2 0x1 /* PC23 periph B with pullup */ + 2 22 0x2 0x0>; /* PC22 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <2 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <2 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <2 9 0x3 0x1 /* PC9 periph C with pullup */ + 2 8 0x3 0x0>; /* PC8 periph C */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 16 0x3 0x1 /* PC17 periph C with pullup */ + 2 17 0x3 0x0>; /* PC16 periph C */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ + 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 11 0x2 0x1 /* PA11 periph B with pullup */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 13 0x2 0x1 /* PA13 periph B with pullup */ + 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -155,6 +300,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -164,6 +311,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -173,6 +322,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -182,6 +333,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -215,6 +368,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 912b2c283d6f..0376bf4fd66b 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -45,6 +45,28 @@ i2c1: i2c@f8014000 { status = "okay"; }; + + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioA 7 0>; + }; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi new file mode 100644 index 000000000000..54eb33ba6d22 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -0,0 +1,49 @@ +/* + * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X25 SoC"; + compatible = "atmel, at91sam9x25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000001c /* pioA */ + 0x0007ffff 0x00047e3f 0x00000000 /* pioB */ + 0x80000000 0xfffd0000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <2 16 0x2 0x0 /* PC16 periph B */ + 2 18 0x2 0x0 /* PC18 periph B */ + 2 19 0x2 0x0 /* PC19 periph B */ + 2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 2 28 0x2 0x0 /* PC28 periph B */ + 2 29 0x2 0x0 /* PC29 periph B */ + 2 30 0x2 0x0 /* PC30 periph B */ + 2 31 0x2 0x0>; /* PC31 periph B */ + }; + }; + }; + + macb1: ethernet@f8030000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts new file mode 100644 index 000000000000..af907eaa1f25 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x25.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi new file mode 100644 index 000000000000..fb102d6126ce --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X35 SoC"; + compatible = "atmel, at91sam9x35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts new file mode 100644 index 000000000000..5ccb607b5414 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9X35-EK"; + compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 03fc136421c5..7ee49e8daf98 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -111,50 +111,244 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 0 0x1 0x1 /* PA0 periph A with pullup */ + 0 1 0x1 0x0>; /* PA1 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 5 0x1 0x1 /* PA5 periph A with pullup */ + 0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 27 0x3 0x0>; /* PC27 periph C */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 28 0x3 0x0>; /* PC28 periph C */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_uart3: usart3-0 { + atmel,pins = + <3 23 0x2 0x1 /* PC22 periph B with pullup */ + 3 23 0x2 0x0>; /* PC23 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <3 8 0x3 0x0 /* PC8 periph C */ + 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <3 16 0x3 0x0 /* PC16 periph C */ + 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */ + 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A */ + 1 1 0x1 0x0 /* PB1 periph A */ + 1 2 0x1 0x0 /* PB2 periph A */ + 1 3 0x1 0x0 /* PB3 periph A */ + 1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0 /* PB5 periph A */ + 1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0>; /* PB10 periph A */ + }; + + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { + atmel,pins = + <1 8 0x1 0x0 /* PA8 periph A */ + 1 11 0x1 0x0 /* PA11 periph A */ + 1 12 0x1 0x0 /* PA12 periph A */ + 1 13 0x1 0x0 /* PA13 periph A */ + 1 14 0x1 0x0 /* PA14 periph A */ + 1 15 0x1 0x0 /* PA15 periph A */ + 1 16 0x1 0x0 /* PA16 periph A */ + 1 17 0x1 0x0>; /* PA17 periph A */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 13 0x2 0x0 /* PA13 periph B */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 2 0x2 0x1 /* PA2 periph B with pullup */ + 0 3 0x2 0x1 /* PA3 periph B with pullup */ + 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <19>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc1: mmc@f000c000 { + compatible = "atmel,hsmci"; + reg = <0xf000c000 0x600>; + interrupts = <26 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -164,6 +358,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -173,6 +369,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -182,6 +380,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -189,6 +389,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; }; @@ -273,6 +475,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi new file mode 100644 index 000000000000..8a7cf1d9cf5d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -0,0 +1,101 @@ +/* + * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/include/ "at91sam9x5cm.dtsi" + +/ { + model = "Atmel AT91SAM9X5-EK"; + compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0>; + }; + }; + + mmc1: mmc@f000c000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 14 0>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; + + i2c2: i2c@f8018000 { + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 19 1 + &pioD 20 1 + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts new file mode 100644 index 000000000000..248067cf7069 --- /dev/null +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +/include/ "bcm11351.dtsi" + +/ { + model = "BCM11351 BRT board"; + compatible = "bcm,bcm11351-brt", "bcm,bcm11351"; + + memory { + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + uart@3e000000 { + status = "okay"; + }; + +}; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi new file mode 100644 index 000000000000..ad135885bd2a --- /dev/null +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "BCM11351 SoC"; + compatible = "bcm,bcm11351"; + interrupt-parent = <&gic>; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + gic: interrupt-controller@3ff00100 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x3ff01000 0x1000>, + <0x3ff00100 0x100>; + }; + + uart@3e000000 { + compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x3e000000 0x1000>; + clock-frequency = <13000000>; + interrupts = <0x0 67 0x4>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x3ff20000 0x1000>; + cache-unified; + cache-level = <2>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 7dd860f83f96..9b72054a0bc0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -10,3 +10,18 @@ reg = <0 0x10000000>; }; }; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&alt0 &alt3>; + + alt0: alt0 { + brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 14 15 40 45>; + brcm,function = <4>; /* alt0 */ + }; + + alt3: alt3 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <7>; /* alt3 */ + }; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 0b619398532c..8917550fd1bb 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -29,11 +29,39 @@ #interrupt-cells = <2>; }; + watchdog { + compatible = "brcm,bcm2835-pm-wdt"; + reg = <0x7e100000 0x28>; + }; + uart@20201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; interrupts = <2 25>; clock-frequency = <3000000>; }; + + gpio: gpio { + compatible = "brcm,bcm2835-gpio"; + reg = <0x7e200000 0xb4>; + /* + * The GPIO IP block is designed for 3 banks of GPIOs. + * Each bank has a GPIO interrupt for itself. + * There is an overall "any bank" interrupt. + * In order, these are GIC interrupts 17, 18, 19, 20. + * Since the BCM2835 only has 2 banks, the 2nd bank + * interrupt output appears to be mirrored onto the + * 3rd bank's interrupt signal. + * So, a bank0 interrupt shows up on 17, 20, and + * a bank1 interrupt shows up on 18, 19, 20! + */ + interrupts = <2 17>, <2 18>, <2 19>, <2 20>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 9f553630242a..0d69322f689f 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -203,6 +203,14 @@ reg = <0x80157450 0xC>; }; + thermal@801573c0 { + compatible = "stericsson,db8500-thermal"; + reg = <0x801573c0 0x40>; + interrupts = <21 0x4>, <22 0x4>; + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; + status = "disabled"; + }; + db8500-prcmu-regulators { compatible = "stericsson,db8500-prcmu-regulator"; @@ -630,6 +638,11 @@ status = "disabled"; }; + cpufreq-cooling { + compatible = "stericsson,db8500-cpufreq-cooling"; + status = "disabled"; + }; + vmmci: regulator-gpio { compatible = "regulator-gpio"; diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts new file mode 100644 index 000000000000..46477ac1de99 --- /dev/null +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -0,0 +1,104 @@ +/* + * Copyright 2011-2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; + +/* First 4KB has pen for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; + +/ { + model = "Calxeda ECX-2000"; + compatible = "calxeda,ecx-2000"; + #address-cells = <2>; + #size-cells = <2>; + clock-ranges; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a15"; + reg = <0>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + reg = <1>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + reg = <2>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + reg = <3>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + }; + + memory@0 { + name = "memory"; + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0xff800000>; + }; + + memory@200000000 { + name = "memory"; + device_type = "memory"; + reg = <0x00000002 0x00000000 0x00000003 0x00000000>; + }; + + soc { + ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>; + + timer { + compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + intc: interrupt-controller@fff11000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + #address-cells = <1>; + interrupt-controller; + interrupts = <1 9 0xf04>; + reg = <0xfff11000 0x1000>, + <0xfff12000 0x1000>, + <0xfff14000 0x2000>, + <0xfff16000 0x2000>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + }; + }; +}; + +/include/ "ecx-common.dtsi" diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi new file mode 100644 index 000000000000..d61b535f682a --- /dev/null +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -0,0 +1,237 @@ +/* + * Copyright 2011-2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/ { + chosen { + bootargs = "console=ttyAMA0"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + + sata@ffe08000 { + compatible = "calxeda,hb-ahci"; + reg = <0xffe08000 0x10000>; + interrupts = <0 83 4>; + dma-coherent; + calxeda,port-phys = <&combophy5 0 &combophy0 0 + &combophy0 1 &combophy0 2 + &combophy0 3>; + }; + + sdhci@ffe0e000 { + compatible = "calxeda,hb-sdhci"; + reg = <0xffe0e000 0x1000>; + interrupts = <0 90 4>; + clocks = <&eclk>; + status = "disabled"; + }; + + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; + }; + + ipc@fff20000 { + compatible = "arm,pl320", "arm,primecell"; + reg = <0xfff20000 0x1000>; + interrupts = <0 7 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpioe: gpio@fff30000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff30000 0x1000>; + interrupts = <0 14 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpiof: gpio@fff31000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff31000 0x1000>; + interrupts = <0 15 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpiog: gpio@fff32000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff32000 0x1000>; + interrupts = <0 16 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpioh: gpio@fff33000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff33000 0x1000>; + interrupts = <0 17 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + timer@fff34000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfff34000 0x1000>; + interrupts = <0 18 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + rtc@fff35000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0xfff35000 0x1000>; + interrupts = <0 19 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + serial@fff36000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xfff36000 0x1000>; + interrupts = <0 20 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + smic@fff3a000 { + compatible = "ipmi-smic"; + device_type = "ipmi"; + reg = <0xfff3a000 0x1000>; + interrupts = <0 24 4>; + reg-size = <4>; + reg-spacing = <4>; + }; + + sregs@fff3c000 { + compatible = "calxeda,hb-sregs"; + reg = <0xfff3c000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + a9bclk: a9bclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9bus-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + emmcpll: emmcpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x10C>; + }; + + eclk: eclk { + #clock-cells = <0>; + compatible = "calxeda,hb-emmc-clock"; + clocks = <&emmcpll>; + reg = <0x114>; + }; + + pclk: pclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <150000000>; + }; + }; + }; + + dma@fff3d000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xfff3d000 0x1000>; + interrupts = <0 92 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4 0 78 4 0 79 4>; + dma-coherent; + }; + + ethernet@fff51000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff51000 0x1000>; + interrupts = <0 80 4 0 81 4 0 82 4>; + dma-coherent; + }; + + combophy0: combo-phy@fff58000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff58000 0x1000>; + phydev = <5>; + }; + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 3428f1a94dcc..e1347fceb5bc 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -282,5 +282,11 @@ reg = <0x12690000 0x1000>; interrupts = <0 36 0>; }; + + mdma1: mdma@12850000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12850000 0x1000>; + interrupts = <0 34 0>; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts new file mode 100644 index 000000000000..921c83cf694f --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -0,0 +1,46 @@ +/* + * SAMSUNG SSDK5440 board device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5440.dtsi" + +/ { + model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; + compatible = "samsung,ssdk5440", "samsung,exynos5440"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + chosen { + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc"; + }; + + spi { + status = "disabled"; + }; + + i2c@F0000 { + status = "disabled"; + }; + + i2c@100000 { + status = "disabled"; + }; + + watchdog { + status = "disabled"; + }; + + rtc { + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi new file mode 100644 index 000000000000..024269de8ee5 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -0,0 +1,159 @@ +/* + * SAMSUNG EXYNOS5440 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,exynos5440"; + + interrupt-parent = <&gic>; + + gic:interrupt-controller@2E0000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2E1000 0x1000>, <0x2E2000 0x1000>; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>; + clock-frequency = <1000000>; + }; + }; + cpu@1 { + compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 14 0xf08>; + clock-frequency = <1000000>; + }; + }; + cpu@2 { + compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 14 0xf08>; + clock-frequency = <1000000>; + }; + }; + cpu@3 { + compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 14 0xf08>; + clock-frequency = <1000000>; + }; + }; + }; + + common { + compatible = "samsung,exynos5440"; + + }; + + serial@B0000 { + compatible = "samsung,exynos4210-uart"; + reg = <0xB0000 0x1000>; + interrupts = <0 2 0>; + }; + + serial@C0000 { + compatible = "samsung,exynos4210-uart"; + reg = <0xC0000 0x1000>; + interrupts = <0 3 0>; + }; + + spi { + compatible = "samsung,exynos4210-spi"; + reg = <0xD0000 0x1000>; + interrupts = <0 4 0>; + tx-dma-channel = <&pdma0 5>; /* preliminary */ + rx-dma-channel = <&pdma0 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + pinctrl { + compatible = "samsung,pinctrl-exynos5440"; + reg = <0xE0000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + + fan: fan { + samsung,exynos5440-pin-function = <1>; + }; + + hdd_led0: hdd_led0 { + samsung,exynos5440-pin-function = <2>; + }; + + hdd_led1: hdd_led1 { + samsung,exynos5440-pin-function = <3>; + }; + + uart1: uart1 { + samsung,exynos5440-pin-function = <4>; + }; + }; + + i2c@F0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xF0000 0x1000>; + interrupts = <0 5 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@100000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x100000 0x1000>; + interrupts = <0 6 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + watchdog { + compatible = "samsung,s3c2410-wdt"; + reg = <0x110000 0x1000>; + interrupts = <0 1 0>; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <0 34 0>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121000 0x1000>; + interrupts = <0 35 0>; + }; + }; + + rtc { + compatible = "samsung,s3c6410-rtc"; + reg = <0x130000 0x1000>; + interrupts = <0 16 0>, <0 17 0>; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 0c6fc34821f9..a9ae5d32e80d 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -69,16 +69,8 @@ reg = <0x00000000 0xff900000>; }; - chosen { - bootargs = "console=ttyAMA0"; - }; - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; + ranges = <0x00000000 0x00000000 0xffffffff>; timer@fff10600 { compatible = "arm,cortex-a9-twd-timer"; @@ -117,173 +109,6 @@ interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; }; - sata@ffe08000 { - compatible = "calxeda,hb-ahci"; - reg = <0xffe08000 0x10000>; - interrupts = <0 83 4>; - calxeda,port-phys = <&combophy5 0 &combophy0 0 - &combophy0 1 &combophy0 2 - &combophy0 3>; - dma-coherent; - }; - - sdhci@ffe0e000 { - compatible = "calxeda,hb-sdhci"; - reg = <0xffe0e000 0x1000>; - interrupts = <0 90 4>; - clocks = <&eclk>; - }; - - memory-controller@fff00000 { - compatible = "calxeda,hb-ddr-ctrl"; - reg = <0xfff00000 0x1000>; - interrupts = <0 91 4>; - }; - - ipc@fff20000 { - compatible = "arm,pl320", "arm,primecell"; - reg = <0xfff20000 0x1000>; - interrupts = <0 7 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpioe: gpio@fff30000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff30000 0x1000>; - interrupts = <0 14 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpiof: gpio@fff31000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff31000 0x1000>; - interrupts = <0 15 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpiog: gpio@fff32000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff32000 0x1000>; - interrupts = <0 16 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpioh: gpio@fff33000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff33000 0x1000>; - interrupts = <0 17 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - timer { - compatible = "arm,sp804", "arm,primecell"; - reg = <0xfff34000 0x1000>; - interrupts = <0 18 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - rtc@fff35000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0xfff35000 0x1000>; - interrupts = <0 19 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - serial@fff36000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xfff36000 0x1000>; - interrupts = <0 20 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - smic@fff3a000 { - compatible = "ipmi-smic"; - device_type = "ipmi"; - reg = <0xfff3a000 0x1000>; - interrupts = <0 24 4>; - reg-size = <4>; - reg-spacing = <4>; - }; - - sregs@fff3c000 { - compatible = "calxeda,hb-sregs"; - reg = <0xfff3c000 0x1000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <33333000>; - }; - - ddrpll: ddrpll { - #clock-cells = <0>; - compatible = "calxeda,hb-pll-clock"; - clocks = <&osc>; - reg = <0x108>; - }; - - a9pll: a9pll { - #clock-cells = <0>; - compatible = "calxeda,hb-pll-clock"; - clocks = <&osc>; - reg = <0x100>; - }; - - a9periphclk: a9periphclk { - #clock-cells = <0>; - compatible = "calxeda,hb-a9periph-clock"; - clocks = <&a9pll>; - reg = <0x104>; - }; - - a9bclk: a9bclk { - #clock-cells = <0>; - compatible = "calxeda,hb-a9bus-clock"; - clocks = <&a9pll>; - reg = <0x104>; - }; - - emmcpll: emmcpll { - #clock-cells = <0>; - compatible = "calxeda,hb-pll-clock"; - clocks = <&osc>; - reg = <0x10C>; - }; - - eclk: eclk { - #clock-cells = <0>; - compatible = "calxeda,hb-emmc-clock"; - clocks = <&emmcpll>; - reg = <0x114>; - }; - - pclk: pclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <150000000>; - }; - }; - }; sregs@fff3c200 { compatible = "calxeda,hb-sregs-l2-ecc"; @@ -291,38 +116,7 @@ interrupts = <0 71 4 0 72 4>; }; - dma@fff3d000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xfff3d000 0x1000>; - interrupts = <0 92 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - ethernet@fff50000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; - }; - - ethernet@fff51000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff51000 0x1000>; - interrupts = <0 80 4 0 81 4 0 82 4>; - }; - - combophy0: combo-phy@fff58000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff58000 0x1000>; - phydev = <5>; - }; - - combophy5: combo-phy@fff5d000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff5d000 0x1000>; - phydev = <31>; - }; }; }; + +/include/ "ecx-common.dtsi" diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index 0a8978a40ece..b01c0d745fc5 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -23,10 +23,6 @@ soc { aipi@10000000 { /* aipi */ - wdog@10002000 { - status = "okay"; - }; - uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index d7013f73f2e9..13b7053d799e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -834,6 +834,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cbd2b1c7487b..567e7ee72f91 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -22,6 +22,22 @@ }; soc { + display@di0 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1_1>; + }; + + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 1>; + interface-pix-fmt = "rgb565"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp2_1>; + }; + aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 1fdee31b4909..1f5d45eff45e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -62,6 +62,13 @@ interrupt-parent = <&tzic>; ranges; + ipu: ipu@40000000 { + #crtc-cells = <1>; + compatible = "fsl,imx51-ipu"; + reg = <0x40000000 0x20000000>; + interrupts = <11 10>; + }; + aips@70000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -80,6 +87,8 @@ compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; + clocks = <&clks 44>, <&clks 0>, <&clks 71>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -87,6 +96,8 @@ compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; + clocks = <&clks 45>, <&clks 0>, <&clks 72>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; }; @@ -95,6 +106,8 @@ compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x7000c000 0x4000>; interrupts = <33>; + clocks = <&clks 32>, <&clks 33>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -104,6 +117,8 @@ compatible = "fsl,imx51-ecspi"; reg = <0x70010000 0x4000>; interrupts = <36>; + clocks = <&clks 51>, <&clks 52>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -111,6 +126,7 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x70014000 0x4000>; interrupts = <30>; + clocks = <&clks 49>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -120,6 +136,8 @@ compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; interrupts = <3>; + clocks = <&clks 46>, <&clks 0>, <&clks 73>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; }; @@ -128,6 +146,8 @@ compatible = "fsl,imx51-esdhc"; reg = <0x70024000 0x4000>; interrupts = <4>; + clocks = <&clks 47>, <&clks 0>, <&clks 74>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; }; @@ -205,12 +225,14 @@ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; + clocks = <&clks 0>; }; wdog2: wdog@73f9c000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f9c000 0x4000>; interrupts = <59>; + clocks = <&clks 0>; status = "disabled"; }; @@ -298,6 +320,66 @@ }; }; + ipu_disp1 { + pinctrl_ipu_disp1_1: ipudisp1grp-1 { + fsl,pins = < + 528 0x5 /* MX51_PAD_DISP1_DAT0__DISP1_DAT0 */ + 529 0x5 /* MX51_PAD_DISP1_DAT1__DISP1_DAT1 */ + 530 0x5 /* MX51_PAD_DISP1_DAT2__DISP1_DAT2 */ + 531 0x5 /* MX51_PAD_DISP1_DAT3__DISP1_DAT3 */ + 532 0x5 /* MX51_PAD_DISP1_DAT4__DISP1_DAT4 */ + 533 0x5 /* MX51_PAD_DISP1_DAT5__DISP1_DAT5 */ + 535 0x5 /* MX51_PAD_DISP1_DAT6__DISP1_DAT6 */ + 537 0x5 /* MX51_PAD_DISP1_DAT7__DISP1_DAT7 */ + 539 0x5 /* MX51_PAD_DISP1_DAT8__DISP1_DAT8 */ + 541 0x5 /* MX51_PAD_DISP1_DAT9__DISP1_DAT9 */ + 543 0x5 /* MX51_PAD_DISP1_DAT10__DISP1_DAT10 */ + 545 0x5 /* MX51_PAD_DISP1_DAT11__DISP1_DAT11 */ + 547 0x5 /* MX51_PAD_DISP1_DAT12__DISP1_DAT12 */ + 549 0x5 /* MX51_PAD_DISP1_DAT13__DISP1_DAT13 */ + 551 0x5 /* MX51_PAD_DISP1_DAT14__DISP1_DAT14 */ + 553 0x5 /* MX51_PAD_DISP1_DAT15__DISP1_DAT15 */ + 555 0x5 /* MX51_PAD_DISP1_DAT16__DISP1_DAT16 */ + 557 0x5 /* MX51_PAD_DISP1_DAT17__DISP1_DAT17 */ + 559 0x5 /* MX51_PAD_DISP1_DAT18__DISP1_DAT18 */ + 563 0x5 /* MX51_PAD_DISP1_DAT19__DISP1_DAT19 */ + 567 0x5 /* MX51_PAD_DISP1_DAT20__DISP1_DAT20 */ + 571 0x5 /* MX51_PAD_DISP1_DAT21__DISP1_DAT21 */ + 575 0x5 /* MX51_PAD_DISP1_DAT22__DISP1_DAT22 */ + 579 0x5 /* MX51_PAD_DISP1_DAT23__DISP1_DAT23 */ + 584 0x5 /* MX51_PAD_DI1_PIN2__DI1_PIN2 (hsync) */ + 583 0x5 /* MX51_PAD_DI1_PIN3__DI1_PIN3 (vsync) */ + >; + }; + }; + + ipu_disp2 { + pinctrl_ipu_disp2_1: ipudisp2grp-1 { + fsl,pins = < + 603 0x5 /* MX51_PAD_DISP2_DAT0__DISP2_DAT0 */ + 608 0x5 /* MX51_PAD_DISP2_DAT1__DISP2_DAT1 */ + 613 0x5 /* MX51_PAD_DISP2_DAT2__DISP2_DAT2 */ + 614 0x5 /* MX51_PAD_DISP2_DAT3__DISP2_DAT3 */ + 615 0x5 /* MX51_PAD_DISP2_DAT4__DISP2_DAT4 */ + 616 0x5 /* MX51_PAD_DISP2_DAT5__DISP2_DAT5 */ + 617 0x5 /* MX51_PAD_DISP2_DAT6__DISP2_DAT6 */ + 622 0x5 /* MX51_PAD_DISP2_DAT7__DISP2_DAT7 */ + 627 0x5 /* MX51_PAD_DISP2_DAT8__DISP2_DAT8 */ + 633 0x5 /* MX51_PAD_DISP2_DAT9__DISP2_DAT9 */ + 637 0x5 /* MX51_PAD_DISP2_DAT10__DISP2_DAT10 */ + 643 0x5 /* MX51_PAD_DISP2_DAT11__DISP2_DAT11 */ + 648 0x5 /* MX51_PAD_DISP2_DAT12__DISP2_DAT12 */ + 652 0x5 /* MX51_PAD_DISP2_DAT13__DISP2_DAT13 */ + 656 0x5 /* MX51_PAD_DISP2_DAT14__DISP2_DAT14 */ + 661 0x5 /* MX51_PAD_DISP2_DAT15__DISP2_DAT15 */ + 593 0x5 /* MX51_PAD_DI2_PIN2__DI2_PIN2 (hsync) */ + 595 0x5 /* MX51_PAD_DI2_PIN3__DI2_PIN3 (vsync) */ + 597 0x5 /* MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK */ + 599 0x5 /* MX51_PAD_DI_GP4__DI2_PIN15 */ + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -330,10 +412,30 @@ }; }; + pwm1: pwm@73fb4000 { + #pwm-cells = <2>; + compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; + reg = <0x73fb4000 0x4000>; + clocks = <&clks 37>, <&clks 38>; + clock-names = "ipg", "per"; + interrupts = <61>; + }; + + pwm2: pwm@73fb8000 { + #pwm-cells = <2>; + compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; + reg = <0x73fb8000 0x4000>; + clocks = <&clks 39>, <&clks 40>; + clock-names = "ipg", "per"; + interrupts = <94>; + }; + uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; + clocks = <&clks 28>, <&clks 29>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -341,8 +443,17 @@ compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fc0000 0x4000>; interrupts = <32>; + clocks = <&clks 30>, <&clks 31>; + clock-names = "ipg", "per"; status = "disabled"; }; + + clks: ccm@73fd4000{ + compatible = "fsl,imx51-ccm"; + reg = <0x73fd4000 0x4000>; + interrupts = <0 71 0x04 0 72 0x04>; + #clock-cells = <1>; + }; }; aips@80000000 { /* AIPS2 */ @@ -358,6 +469,8 @@ compatible = "fsl,imx51-ecspi"; reg = <0x83fac000 0x4000>; interrupts = <37>; + clocks = <&clks 53>, <&clks 54>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -365,6 +478,8 @@ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; + clocks = <&clks 56>, <&clks 56>; + clock-names = "ipg", "ahb"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; @@ -374,6 +489,8 @@ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; reg = <0x83fc0000 0x4000>; interrupts = <38>; + clocks = <&clks 55>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -383,6 +500,7 @@ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x83fc4000 0x4000>; interrupts = <63>; + clocks = <&clks 35>; status = "disabled"; }; @@ -392,6 +510,7 @@ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x83fc8000 0x4000>; interrupts = <62>; + clocks = <&clks 34>; status = "disabled"; }; @@ -399,6 +518,7 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fcc000 0x4000>; interrupts = <29>; + clocks = <&clks 48>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -414,6 +534,7 @@ compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; + clocks = <&clks 60>; status = "disabled"; }; @@ -421,6 +542,7 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; interrupts = <96>; + clocks = <&clks 50>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -430,6 +552,8 @@ compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; + clocks = <&clks 42>, <&clks 42>, <&clks 42>; + clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index f45d4b1e21b5..552aed4ff982 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -67,6 +67,13 @@ interrupt-parent = <&tzic>; ranges; + ipu: ipu@18000000 { + #crtc-cells = <1>; + compatible = "fsl,imx53-ipu"; + reg = <0x18000000 0x080000000>; + interrupts = <11 10>; + }; + aips@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -85,6 +92,8 @@ compatible = "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; + clocks = <&clks 44>, <&clks 0>, <&clks 71>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; }; @@ -93,6 +102,8 @@ compatible = "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; + clocks = <&clks 45>, <&clks 0>, <&clks 72>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; }; @@ -101,6 +112,8 @@ compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; interrupts = <33>; + clocks = <&clks 32>, <&clks 33>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -110,6 +123,8 @@ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; reg = <0x50010000 0x4000>; interrupts = <36>; + clocks = <&clks 51>, <&clks 52>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -117,6 +132,7 @@ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <30>; + clocks = <&clks 49>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -126,6 +142,8 @@ compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; + clocks = <&clks 46>, <&clks 0>, <&clks 73>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; }; @@ -134,6 +152,8 @@ compatible = "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; + clocks = <&clks 47>, <&clks 0>, <&clks 74>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; }; @@ -211,12 +231,14 @@ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; + clocks = <&clks 0>; }; wdog2: wdog@53f9c000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f9c000 0x4000>; interrupts = <59>; + clocks = <&clks 0>; status = "disabled"; }; @@ -421,10 +443,30 @@ }; + pwm1: pwm@53fb4000 { + #pwm-cells = <2>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb4000 0x4000>; + clocks = <&clks 37>, <&clks 38>; + clock-names = "ipg", "per"; + interrupts = <61>; + }; + + pwm2: pwm@53fb8000 { + #pwm-cells = <2>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb8000 0x4000>; + clocks = <&clks 39>, <&clks 40>; + clock-names = "ipg", "per"; + interrupts = <94>; + }; + uart1: serial@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; interrupts = <31>; + clocks = <&clks 28>, <&clks 29>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -432,6 +474,8 @@ compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fc0000 0x4000>; interrupts = <32>; + clocks = <&clks 30>, <&clks 31>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -439,6 +483,8 @@ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fc8000 0x4000>; interrupts = <82>; + clocks = <&clks 158>, <&clks 157>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -446,9 +492,18 @@ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; + clocks = <&clks 158>, <&clks 157>; + clock-names = "ipg", "per"; status = "disabled"; }; + clks: ccm@53fd4000{ + compatible = "fsl,imx53-ccm"; + reg = <0x53fd4000 0x4000>; + interrupts = <0 71 0x04 0 72 0x04>; + #clock-cells = <1>; + }; + gpio5: gpio@53fdc000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fdc000 0x4000>; @@ -485,6 +540,7 @@ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; reg = <0x53fec000 0x4000>; interrupts = <64>; + clocks = <&clks 88>; status = "disabled"; }; @@ -492,6 +548,8 @@ compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53ff0000 0x4000>; interrupts = <13>; + clocks = <&clks 65>, <&clks 66>; + clock-names = "ipg", "per"; status = "disabled"; }; }; @@ -507,6 +565,8 @@ compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x63f90000 0x4000>; interrupts = <86>; + clocks = <&clks 67>, <&clks 68>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -516,6 +576,8 @@ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; reg = <0x63fac000 0x4000>; interrupts = <37>; + clocks = <&clks 53>, <&clks 54>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -523,6 +585,8 @@ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; + clocks = <&clks 56>, <&clks 56>; + clock-names = "ipg", "ahb"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; @@ -532,6 +596,8 @@ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; reg = <0x63fc0000 0x4000>; interrupts = <38>; + clocks = <&clks 55>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -541,6 +607,7 @@ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; reg = <0x63fc4000 0x4000>; interrupts = <63>; + clocks = <&clks 35>; status = "disabled"; }; @@ -550,6 +617,7 @@ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; reg = <0x63fc8000 0x4000>; interrupts = <62>; + clocks = <&clks 34>; status = "disabled"; }; @@ -557,6 +625,7 @@ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; interrupts = <29>; + clocks = <&clks 48>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -572,6 +641,7 @@ compatible = "fsl,imx53-nand"; reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; interrupts = <8>; + clocks = <&clks 60>; status = "disabled"; }; @@ -579,6 +649,7 @@ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; interrupts = <96>; + clocks = <&clks 50>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -588,6 +659,8 @@ compatible = "fsl,imx53-fec", "fsl,imx25-fec"; reg = <0x63fec000 0x4000>; interrupts = <87>; + clocks = <&clks 42>, <&clks 42>, <&clks 42>; + clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 6dfeaedef307..d6265ca97119 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -276,23 +276,39 @@ }; pwm1: pwm@02080000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 0x04>; + clocks = <&clks 62>, <&clks 145>; + clock-names = "ipg", "per"; }; pwm2: pwm@02084000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 0x04>; + clocks = <&clks 62>, <&clks 146>; + clock-names = "ipg", "per"; }; pwm3: pwm@02088000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 0x04>; + clocks = <&clks 62>, <&clks 147>; + clock-names = "ipg", "per"; }; pwm4: pwm@0208c000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 0x04>; + clocks = <&clks 62>, <&clks 148>; + clock-names = "ipg", "per"; }; can1: flexcan@02090000 { @@ -596,6 +612,7 @@ 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + 1033 0x4001b0a8 /* MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT*/ >; }; @@ -849,8 +866,8 @@ compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; - clocks = <&clks 117>, <&clks 117>; - clock-names = "ipg", "ahb"; + clocks = <&clks 117>, <&clks 117>, <&clks 177>; + clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; @@ -1021,5 +1038,23 @@ status = "disabled"; }; }; + + ipu1: ipu@02400000 { + #crtc-cells = <1>; + compatible = "fsl,imx6q-ipu"; + reg = <0x02400000 0x400000>; + interrupts = <0 6 0x4 0 5 0x4>; + clocks = <&clks 130>, <&clks 131>, <&clks 132>; + clock-names = "bus", "di0", "di1"; + }; + + ipu2: ipu@02800000 { + #crtc-cells = <1>; + compatible = "fsl,imx6q-ipu"; + reg = <0x02800000 0x400000>; + interrupts = <0 8 0x4 0 7 0x4>; + clocks = <&clks 133>, <&clks 134>, <&clks 137>; + clock-names = "bus", "di0", "di1"; + }; }; }; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts new file mode 100644 index 000000000000..387fedb58988 --- /dev/null +++ b/arch/arm/boot/dts/pm9g45.dts @@ -0,0 +1,165 @@ +/* + * pm9g45.dts - Device Tree file for Ronetix pm9g45 board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g45.dtsi" + +/ { + model = "Ronetix pm9g45"; + compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x70000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + }; + + pinctrl@fffff200 { + + board { + pinctrl_board_nand: nand0-board { + atmel,pins = + <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + mmc { + pinctrl_board_mmc: mmc0-board { + atmel,pins = + <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + }; + }; + }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 6 0>; + }; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + pinctrl-0 = <&pinctrl_board_nand>; + + gpios = <&pioD 3 0 + &pioC 14 0 + 0 + >; + + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x1A0000>; + }; + + kernel@200000 { + label = "bareboxenv2"; + reg = <0x200000 0x300000>; + }; + + kernel@500000 { + label = "root"; + reg = <0x500000 0x400000>; + }; + + data@900000 { + label = "data"; + reg = <0x900000 0x8340000>; + }; + }; + + usb0: ohci@00700000 { + status = "okay"; + num-ports = <2>; + }; + + usb1: ehci@00800000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "led0"; + gpios = <&pioD 0 1>; + linux,default-trigger = "nand-disk"; + }; + + led1 { + label = "led1"; + gpios = <&pioD 31 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + right { + label = "SW4"; + gpios = <&pioE 7 1>; + linux,code = <106>; + }; + + up { + label = "SW3"; + gpios = <&pioE 8 1>; + linux,code = <103>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sh7377.dtsi b/arch/arm/boot/dts/sh7372-mackerel.dts index 767ee0796daa..286f0caef013 100644 --- a/arch/arm/boot/dts/sh7377.dtsi +++ b/arch/arm/boot/dts/sh7372-mackerel.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the sh7377 SoC + * Device Tree Source for the mackerel board * * Copyright (C) 2012 Renesas Solutions Corp. * @@ -8,14 +8,15 @@ * kind, whether express or implied. */ +/dts-v1/; /include/ "skeleton.dtsi" / { - compatible = "renesas,sh7377"; + model = "Mackerel (AP4 EVM 2nd)"; + compatible = "renesas,mackerel"; - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; - }; + memory { + device_type = "memory"; + reg = <0x40000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 9e02a913eb62..27f31a5fa494 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -99,6 +99,33 @@ status = "okay"; }; + prcmu@80157000 { + thermal@801573c0 { + num-trips = <4>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <1>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + + trip2-temp = <80000>; + trip2-type = "active"; + trip2-cdev-num = <1>; + trip2-cdev-name0 = "thermal-cpufreq-0"; + + trip3-temp = <85000>; + trip3-type = "critical"; + trip3-cdev-num = <0>; + + status = "okay"; + }; + }; + external-bus@50000000 { status = "okay"; @@ -184,6 +211,10 @@ }; }; + cpufreq-cooling { + status = "okay"; + }; + prcmu@80157000 { db8500-prcmu-regulators { db8500_vape_reg: db8500_vape { diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index dd4358bc26e2..2e4c5727468e 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -181,6 +181,10 @@ status = "okay"; }; + gpio@d8400000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 419ea7413d23..7cd25eb4f8e0 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -70,6 +70,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1310-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -179,6 +185,27 @@ thermal@e07008c4 { st,thermal-flags = <0x7000>; }; + + gpiopinctrl: gpio@d8400000 { + compatible = "st,spear-plgpio"; + reg = <0xd8400000 0x1000>; + interrupts = <0 100 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 246>; + status = "disabled"; + + st-plgpio,ngpio = <246>; + st-plgpio,enb-reg = <0xd0>; + st-plgpio,wdata-reg = <0x90>; + st-plgpio,dir-reg = <0xb0>; + st-plgpio,ie-reg = <0x30>; + st-plgpio,rdata-reg = <0x70>; + st-plgpio,mis-reg = <0x10>; + st-plgpio,eit-reg = <0x50>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c9a54e06fb68..045f7123ffac 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -193,6 +193,10 @@ status = "okay"; }; + gpio@e2800000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index d71fe2a68f09..6c09eb0a1b2b 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -24,6 +24,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1340-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -51,6 +57,26 @@ thermal@e07008c4 { st,thermal-flags = <0x2a00>; }; + + gpiopinctrl: gpio@e2800000 { + compatible = "st,spear-plgpio"; + reg = <0xe2800000 0x1000>; + interrupts = <0 107 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 252>; + status = "disabled"; + + st-plgpio,ngpio = <250>; + st-plgpio,wdata-reg = <0x40>; + st-plgpio,dir-reg = <0x00>; + st-plgpio,ie-reg = <0x80>; + st-plgpio,rdata-reg = <0x20>; + st-plgpio,mis-reg = <0xa0>; + st-plgpio,eit-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index 62fc4fb3e5f9..930303e48df9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -22,9 +22,10 @@ 0xb0000000 0xb0000000 0x10000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b4000000 { + pinmux: pinmux@b4000000 { compatible = "st,spear310-pinmux"; reg = <0xb4000000 0x1000>; + #gpio-range-cells = <2>; }; fsmc: flash@44000000 { @@ -75,6 +76,25 @@ reg = <0xb2200000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b4000000 { + compatible = "st,spear-plgpio"; + reg = <0xb4000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x10>; + st-plgpio,wdata-reg = <0x20>; + st-plgpio,dir-reg = <0x30>; + st-plgpio,ie-reg = <0x50>; + st-plgpio,rdata-reg = <0x40>; + st-plgpio,mis-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 082328bd64ab..ad4bfc68ee05 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -164,6 +164,10 @@ status = "okay"; }; + gpio@b3000000 { + status = "okay"; + }; + i2c0: i2c@d0180000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 1f49d69595a0..67d7ada71275 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -21,9 +21,10 @@ ranges = <0x40000000 0x40000000 0x80000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b3000000 { + pinmux: pinmux@b3000000 { compatible = "st,spear320-pinmux"; reg = <0xb3000000 0x1000>; + #gpio-range-cells = <2>; }; clcd@90000000 { @@ -90,6 +91,26 @@ reg = <0xa4000000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b3000000 { + compatible = "st,spear-plgpio"; + reg = <0xb3000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x24>; + st-plgpio,wdata-reg = <0x34>; + st-plgpio,dir-reg = <0x44>; + st-plgpio,ie-reg = <0x64>; + st-plgpio,rdata-reg = <0x54>; + st-plgpio,mis-reg = <0x84>; + st-plgpio,eit-reg = <0x94>; + }; }; }; }; diff --git a/arch/arm/boot/dts/sun4i-cubieboard.dts b/arch/arm/boot/dts/sun4i-cubieboard.dts new file mode 100644 index 000000000000..f4ca126ad994 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-cubieboard.dts @@ -0,0 +1,38 @@ +/* + * Copyright 2012 Stefan Roese + * Stefan Roese <sr@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i.dtsi" + +/ { + model = "Cubietech Cubieboard"; + compatible = "cubietech,cubieboard", "allwinner,sun4i"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: uart@01c28000 { + status = "okay"; + }; + + uart1: uart@01c28400 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i.dtsi b/arch/arm/boot/dts/sun4i.dtsi new file mode 100644 index 000000000000..e61fdd47bd01 --- /dev/null +++ b/arch/arm/boot/dts/sun4i.dtsi @@ -0,0 +1,19 @@ +/* + * Copyright 2012 Stefan Roese + * Stefan Roese <sr@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "sunxi.dtsi" + +/ { + memory { + reg = <0x40000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts new file mode 100644 index 000000000000..d6ff889a5d87 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-olinuxino.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i.dtsi" + +/ { + model = "Olimex A13-Olinuxino"; + compatible = "olimex,a13-olinuxino", "allwinner,sun5i"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart1: uart@01c28400 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi new file mode 100644 index 000000000000..59a2d265a98e --- /dev/null +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -0,0 +1,20 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "sunxi.dtsi" + +/ { + memory { + reg = <0x40000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi new file mode 100644 index 000000000000..8bbc2bfef221 --- /dev/null +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -0,0 +1,80 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + timer@01c20c00 { + compatible = "allwinner,sunxi-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sunxi-wdt"; + reg = <0x01c20c90 0x10>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sunxi-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: uart@01c28000 { + compatible = "ns8250"; + reg = <0x01c28000 0x400>; + interrupts = <1>; + reg-shift = <2>; + clock-frequency = <24000000>; + status = "disabled"; + }; + + uart1: uart@01c28400 { + compatible = "ns8250"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + clock-frequency = <24000000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index eafeca65eb21..420459825b46 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -492,12 +492,12 @@ }; temperature-sensor@4c { - compatible = "nct1008"; + compatible = "onnn,nct1008"; reg = <0x4c>; }; magnetometer@c { - compatible = "ak8975"; + compatible = "ak,ak8975"; reg = <0xc>; interrupt-parent = <&gpio>; interrupts = <109 0x04>; /* gpio PN5 */ diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index fba998e3954a..b8effa1cbda7 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -91,6 +91,12 @@ }; }; + timer@50004600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x50040600 0x20>; + interrupts = <1 13 0x304>; + }; + cache-controller@50043000 { compatible = "arm,pl310-cache"; reg = <0x50043000 0x1000>; @@ -108,6 +114,15 @@ #interrupt-cells = <3>; }; + timer@60005000 { + compatible = "nvidia,tegra20-timer"; + reg = <0x60005000 0x60>; + interrupts = <0 0 0x04 + 0 1 0x04 + 0 41 0x04 + 0 42 0x04>; + }; + apbdma: dma { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; @@ -225,6 +240,12 @@ #pwm-cells = <2>; }; + rtc { + compatible = "nvidia,tegra20-rtc"; + reg = <0x7000e000 0x100>; + interrupts = <0 2 0x04>; + }; + i2c@7000c000 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index efa603d47a6a..529fdb82dfdb 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -91,6 +91,12 @@ }; }; + timer@50004600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x50040600 0x20>; + interrupts = <1 13 0xf04>; + }; + cache-controller@50043000 { compatible = "arm,pl310-cache"; reg = <0x50043000 0x1000>; @@ -108,6 +114,17 @@ #interrupt-cells = <3>; }; + timer@60005000 { + compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; + reg = <0x60005000 0x400>; + interrupts = <0 0 0x04 + 0 1 0x04 + 0 41 0x04 + 0 42 0x04 + 0 121 0x04 + 0 122 0x04>; + }; + apbdma: dma { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; @@ -219,6 +236,12 @@ #pwm-cells = <2>; }; + rtc { + compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; + reg = <0x7000e000 0x100>; + interrupts = <0 2 0x04>; + }; + i2c@7000c000 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index d8a827bd2bf3..ac870fb3fa0d 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -17,17 +17,16 @@ * CHANGES TO vexpress-v2m.dtsi! */ -/ { - aliases { - arm,v2m_timer = &v2m_timer01; - }; - motherboard { - compatible = "simple-bus"; + model = "V2M-P1"; + arm,hbi = <0x190>; + arm,vexpress,site = <0>; arm,v2m-memory-map = "rs1"; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; #interrupt-cells = <1>; + ranges; flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; @@ -72,14 +71,20 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; - sysreg@010000 { + v2m_sysreg: sysreg@010000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; }; - sysctl@020000 { + v2m_sysctl: sysctl@020000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; }; /* PCI-E I2C bus */ @@ -100,66 +105,92 @@ compatible = "arm,pl041", "arm,primecell"; reg = <0x040000 0x1000>; interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; mmci@050000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@060000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x060000 0x1000>; interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@070000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x070000 0x1000>; interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; v2m_serial0: uart@090000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial1: uart@0a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial2: uart@0b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial3: uart@0c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; wdt@0f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x1000>; interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; }; v2m_timer01: timer@110000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x110000 0x1000>; interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; v2m_timer23: timer@120000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; /* DVI I2C bus */ @@ -185,6 +216,8 @@ compatible = "arm,pl031", "arm,primecell"; reg = <0x170000 0x1000>; interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; compact-flash@1a0000 { @@ -198,6 +231,8 @@ compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "clcdclk", "apb_pclk"; }; }; @@ -208,5 +243,98 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + v2m_oscclk2: osc@2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; + + volt@0 { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; + + temp@0 { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; + + reset@0 { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot@0 { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode@0 { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; }; -}; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index dba53fd026bb..f1420368355b 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -17,16 +17,15 @@ * CHANGES TO vexpress-v2m-rs1.dtsi! */ -/ { - aliases { - arm,v2m_timer = &v2m_timer01; - }; - motherboard { - compatible = "simple-bus"; + model = "V2M-P1"; + arm,hbi = <0x190>; + arm,vexpress,site = <0>; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; #interrupt-cells = <1>; + ranges; flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; @@ -71,14 +70,20 @@ #size-cells = <1>; ranges = <0 7 0 0x20000>; - sysreg@00000 { + v2m_sysreg: sysreg@00000 { compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; + gpio-controller; + #gpio-cells = <2>; }; - sysctl@01000 { + v2m_sysctl: sysctl@01000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x01000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; }; /* PCI-E I2C bus */ @@ -99,66 +104,92 @@ compatible = "arm,pl041", "arm,primecell"; reg = <0x04000 0x1000>; interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; mmci@05000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@06000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x06000 0x1000>; interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@07000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x07000 0x1000>; interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; v2m_serial0: uart@09000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x09000 0x1000>; interrupts = <5>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial1: uart@0a000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a000 0x1000>; interrupts = <6>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial2: uart@0b000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b000 0x1000>; interrupts = <7>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial3: uart@0c000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c000 0x1000>; interrupts = <8>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; wdt@0f000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f000 0x1000>; interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; }; v2m_timer01: timer@11000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x11000 0x1000>; interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; v2m_timer23: timer@12000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x12000 0x1000>; interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; /* DVI I2C bus */ @@ -184,6 +215,8 @@ compatible = "arm,pl031", "arm,primecell"; reg = <0x17000 0x1000>; interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; compact-flash@1a000 { @@ -197,6 +230,8 @@ compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "clcdclk", "apb_pclk"; }; }; @@ -207,5 +242,98 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + v2m_oscclk2: osc@2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; + + volt@0 { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; + + temp@0 { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; + + reset@0 { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot@0 { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode@0 { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; }; -}; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index d12b34ca0568..a3d37ec2655d 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA15"; arm,hbi = <0x237>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <2>; @@ -54,17 +55,24 @@ compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0 0x2b0a0000 0 0x1000>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; wdt@2b060000 { compatible = "arm,sp805", "arm,primecell"; + status = "disabled"; reg = <0 0x2b060000 0 0x1000>; interrupts = <98>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; gic: interrupt-controller@2c001000 { @@ -84,6 +92,8 @@ reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; dma@7ffb0000 { @@ -94,6 +104,8 @@ <0 89 4>, <0 90 4>, <0 91 4>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; timer { @@ -110,7 +122,109 @@ <0 69 4>; }; - motherboard { + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* CPU PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <50000000 60000000>; + #clock-cells = <0>; + clock-output-names = "oscclk0"; + }; + + osc@4 { + /* Multiplexed AXI master clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <20000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk4"; + }; + + oscclk5: osc@5 { + /* HDLCD PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 5>; + freq-range = <23750000 165000000>; + #clock-cells = <0>; + clock-output-names = "oscclk5"; + }; + + smbclk: osc@6 { + /* SMB clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 6>; + freq-range = <20000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk6"; + }; + + oscclk7: osc@7 { + /* SYS PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 7>; + freq-range = <20000000 60000000>; + #clock-cells = <0>; + clock-output-names = "oscclk7"; + }; + + osc@8 { + /* DDR2 PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 8>; + freq-range = <40000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk8"; + }; + + volt@0 { + /* CPU core voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "Cores"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + label = "Cores"; + }; + + amp@0 { + /* Total current for the two cores */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 0>; + label = "Cores"; + }; + + temp@0 { + /* DCC internal temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "DCC"; + }; + + power@0 { + /* Total power */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 0>; + label = "Cores"; + }; + + energy@0 { + /* Total energy */ + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>; + label = "Cores"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0 0x08000000 0x04000000>, <1 0 0 0x14000000 0x04000000>, <2 0 0 0x18000000 0x04000000>, @@ -118,6 +232,7 @@ <4 0 0 0x0c000000 0x04000000>, <5 0 0 0x10000000 0x04000000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -162,7 +277,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; - -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 4890a81c5467..1fc405a9ecfb 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA15_CA7"; arm,hbi = <0x249>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <2>; @@ -74,17 +75,23 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0 0x2a490000 0 0x1000>; interrupts = <98>; + clocks = <&oscclk6a>, <&oscclk6a>; + clock-names = "wdogclk", "apb_pclk"; }; hdlcd@2b000000 { compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0 0x2b0a0000 0 0x1000>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; }; gic: interrupt-controller@2c001000 { @@ -104,6 +111,8 @@ reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; }; dma@7ff00000 { @@ -114,6 +123,8 @@ <0 89 4>, <0 90 4>, <0 91 4>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; }; timer { @@ -130,7 +141,175 @@ <0 69 4>; }; - motherboard { + oscclk6a: oscclk6a { + /* Reference 24MHz clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "oscclk6a"; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* A15 PLL 0 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk0"; + }; + + osc@1 { + /* A15 PLL 1 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk1"; + }; + + osc@2 { + /* A7 PLL 0 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk2"; + }; + + osc@3 { + /* A7 PLL 1 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 3>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk3"; + }; + + osc@4 { + /* External AXI master clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <20000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk4"; + }; + + oscclk5: osc@5 { + /* HDLCD PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 5>; + freq-range = <23750000 165000000>; + #clock-cells = <0>; + clock-output-names = "oscclk5"; + }; + + smbclk: osc@6 { + /* Static memory controller clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 6>; + freq-range = <20000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk6"; + }; + + osc@7 { + /* SYS PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 7>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk7"; + }; + + osc@8 { + /* DDR2 PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 8>; + freq-range = <20000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk8"; + }; + + volt@0 { + /* A15 CPU core voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "A15 Vcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + label = "A15 Vcore"; + }; + + volt@1 { + /* A7 CPU core voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 1>; + regulator-name = "A7 Vcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + label = "A7 Vcore"; + }; + + amp@0 { + /* Total current for the two A15 cores */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 0>; + label = "A15 Icore"; + }; + + amp@1 { + /* Total current for the three A7 cores */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 1>; + label = "A7 Icore"; + }; + + temp@0 { + /* DCC internal temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "DCC"; + }; + + power@0 { + /* Total power for the two A15 cores */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 0>; + label = "A15 Pcore"; + }; + power@1 { + /* Total power for the three A7 cores */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 1>; + label = "A7 Pcore"; + }; + + energy@0 { + /* Total energy for the two A15 cores */ + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>; + label = "A15 Jcore"; + }; + + energy@2 { + /* Total energy for the three A7 cores */ + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 2>; + label = "A7 Jcore"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0 0x08000000 0x04000000>, <1 0 0 0x14000000 0x04000000>, <2 0 0 0x18000000 0x04000000>, @@ -138,6 +317,7 @@ <4 0 0 0x0c000000 0x04000000>, <5 0 0 0x10000000 0x04000000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -182,7 +362,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; - -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 18917a0f8604..6328cbc71d30 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA5s"; arm,hbi = <0x225>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <1>; @@ -56,11 +57,15 @@ compatible = "arm,hdlcd"; reg = <0x2a110000 0x1000>; interrupts = <0 85 4>; + clocks = <&oscclk3>; + clock-names = "pxlclk"; }; memory-controller@2a150000 { compatible = "arm,pl341", "arm,primecell"; reg = <0x2a150000 0x1000>; + clocks = <&oscclk1>; + clock-names = "apb_pclk"; }; memory-controller@2a190000 { @@ -68,6 +73,8 @@ reg = <0x2a190000 0x1000>; interrupts = <0 86 4>, <0 87 4>; + clocks = <&oscclk1>; + clock-names = "apb_pclk"; }; scu@2c000000 { @@ -109,7 +116,77 @@ <0 69 4>; }; - motherboard { + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* CPU and internal AXI reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <50000000 100000000>; + #clock-cells = <0>; + clock-output-names = "oscclk0"; + }; + + oscclk1: osc@1 { + /* Multiplexed AXI master clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <5000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk1"; + }; + + osc@2 { + /* DDR2 */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <80000000 120000000>; + #clock-cells = <0>; + clock-output-names = "oscclk2"; + }; + + oscclk3: osc@3 { + /* HDLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 3>; + freq-range = <23750000 165000000>; + #clock-cells = <0>; + clock-output-names = "oscclk3"; + }; + + osc@4 { + /* Test chip gate configuration */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <80000000 80000000>; + #clock-cells = <0>; + clock-output-names = "oscclk4"; + }; + + smbclk: osc@5 { + /* SMB clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 5>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "oscclk5"; + }; + + temp@0 { + /* DCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "DCC"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0x08000000 0x04000000>, <1 0 0x14000000 0x04000000>, <2 0 0x18000000 0x04000000>, @@ -117,6 +194,7 @@ <4 0 0x0c000000 0x04000000>, <5 0 0x10000000 0x04000000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -161,7 +239,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; - -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 3f0c736d31d6..1420bb14d95c 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA9"; arm,hbi = <0x191>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <1>; @@ -70,11 +71,15 @@ compatible = "arm,pl111", "arm,primecell"; reg = <0x10020000 0x1000>; interrupts = <0 44 4>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; }; memory-controller@100e0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0x100e0000 0x1000>; + clocks = <&oscclk2>; + clock-names = "apb_pclk"; }; memory-controller@100e1000 { @@ -82,6 +87,8 @@ reg = <0x100e1000 0x1000>; interrupts = <0 45 4>, <0 46 4>; + clocks = <&oscclk2>; + clock-names = "apb_pclk"; }; timer@100e4000 { @@ -89,12 +96,16 @@ reg = <0x100e4000 0x1000>; interrupts = <0 48 4>, <0 49 4>; + clocks = <&oscclk2>, <&oscclk2>; + clock-names = "timclk", "apb_pclk"; }; watchdog@100e5000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x100e5000 0x1000>; interrupts = <0 51 4>; + clocks = <&oscclk2>, <&oscclk2>; + clock-names = "wdogclk", "apb_pclk"; }; scu@1e000000 { @@ -140,13 +151,132 @@ <0 63 4>; }; - motherboard { + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + + volt@0 { + /* Test Chip internal logic voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VD10"; + regulator-always-on; + label = "VD10"; + }; + + volt@1 { + /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 1>; + regulator-name = "VD10_S2"; + regulator-always-on; + label = "VD10_S2"; + }; + + volt@2 { + /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 2>; + regulator-name = "VD10_S3"; + regulator-always-on; + label = "VD10_S3"; + }; + + volt@3 { + /* DDR2 SDRAM and Test Chip DDR2 I/O supply */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 3>; + regulator-name = "VCC1V8"; + regulator-always-on; + label = "VCC1V8"; + }; + + volt@4 { + /* DDR2 SDRAM VTT termination voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 4>; + regulator-name = "DDR2VTT"; + regulator-always-on; + label = "DDR2VTT"; + }; + + volt@5 { + /* Local board supply for miscellaneous logic external to the Test Chip */ + arm,vexpress-sysreg,func = <2 5>; + compatible = "arm,vexpress-volt"; + regulator-name = "VCC3V3"; + regulator-always-on; + label = "VCC3V3"; + }; + + amp@0 { + /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 0>; + label = "VD10_S2"; + }; + + amp@1 { + /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 1>; + label = "VD10_S3"; + }; + + power@0 { + /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 0>; + label = "PVD10_S2"; + }; + + power@1 { + /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 1>; + label = "PVD10_S3"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0x40000000 0x04000000>, <1 0 0x44000000 0x04000000>, <2 0 0x48000000 0x04000000>, <3 0 0x4c000000 0x04000000>, <7 0 0x10000000 0x00020000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -191,7 +321,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m.dtsi" }; }; - -/include/ "vexpress-v2m.dtsi" diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index aa5269984187..36ae03a3f5d1 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -70,6 +70,14 @@ struct gic_chip_data { static DEFINE_RAW_SPINLOCK(irq_controller_lock); /* + * The GIC mapping of CPU interfaces does not necessarily match + * the logical CPU numbering. Let's use a mapping as returned + * by the GIC itself. + */ +#define NR_GIC_CPU_IF 8 +static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly; + +/* * Supported arch specific GIC irq extension. * Default make them NULL. */ @@ -238,11 +246,11 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); u32 val, mask, bit; - if (cpu >= 8 || cpu >= nr_cpu_ids) + if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL; mask = 0xff << shift; - bit = 1 << (cpu_logical_map(cpu) + shift); + bit = gic_cpu_map[cpu] << shift; raw_spin_lock(&irq_controller_lock); val = readl_relaxed(reg) & ~mask; @@ -349,11 +357,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic) u32 cpumask; unsigned int gic_irqs = gic->gic_irqs; void __iomem *base = gic_data_dist_base(gic); - u32 cpu = cpu_logical_map(smp_processor_id()); - - cpumask = 1 << cpu; - cpumask |= cpumask << 8; - cpumask |= cpumask << 16; writel_relaxed(0, base + GIC_DIST_CTRL); @@ -366,6 +369,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) /* * Set all global interrupts to this CPU only. */ + cpumask = readl_relaxed(base + GIC_DIST_TARGET + 0); for (i = 32; i < gic_irqs; i += 4) writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); @@ -389,9 +393,25 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) { void __iomem *dist_base = gic_data_dist_base(gic); void __iomem *base = gic_data_cpu_base(gic); + unsigned int cpu_mask, cpu = smp_processor_id(); int i; /* + * Get what the GIC says our CPU mask is. + */ + BUG_ON(cpu >= NR_GIC_CPU_IF); + cpu_mask = readl_relaxed(dist_base + GIC_DIST_TARGET + 0); + gic_cpu_map[cpu] = cpu_mask; + + /* + * Clear our mask from the other map entries in case they're + * still undefined. + */ + for (i = 0; i < NR_GIC_CPU_IF; i++) + if (i != cpu) + gic_cpu_map[i] &= ~cpu_mask; + + /* * Deal with the banked PPI and SGI interrupts - disable all * PPI interrupts, ensure all SGI interrupts are enabled. */ @@ -646,7 +666,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, { irq_hw_number_t hwirq_base; struct gic_chip_data *gic; - int gic_irqs, irq_base; + int gic_irqs, irq_base, i; BUG_ON(gic_nr >= MAX_GIC_NR); @@ -683,6 +703,13 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, } /* + * Initialize the CPU interface map to all CPUs. + * It will be refined as each CPU probes its ID. + */ + for (i = 0; i < NR_GIC_CPU_IF; i++) + gic_cpu_map[i] = 0xff; + + /* * For primary GICs, skip over SGIs. * For secondary GICs, skip over PPIs, too. */ @@ -737,7 +764,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) /* Convert our logical CPU mask into a physical one. */ for_each_cpu(cpu, mask) - map |= 1 << cpu_logical_map(cpu); + map |= gic_cpu_map[cpu]; /* * Ensure that stores to Normal memory are visible to the diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index df13a3ffff35..9d2d3ba339ff 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = { .set_mode = sp804_set_mode, .set_next_event = sp804_set_next_event, .rating = 300, - .cpumask = cpu_all_mask, }; static struct irqaction sp804_timer_irq = { @@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); evt->name = name; evt->irq = irq; + evt->cpumask = cpu_possible_mask; setup_irq(irq, &sp804_timer_irq); clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index e0d538803cc3..e4df17ca90c7 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -218,7 +218,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq, v->resume_sources = resume_sources; v->irq = irq; vic_id++; - v->domain = irq_domain_add_legacy(node, fls(valid_sources), irq, 0, + v->domain = irq_domain_add_simple(node, fls(valid_sources), irq, &vic_irqdomain_ops, v); } @@ -350,7 +350,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, vic_register(base, irq_start, vic_sources, 0, node); } -void __init __vic_init(void __iomem *base, unsigned int irq_start, +void __init __vic_init(void __iomem *base, int irq_start, u32 vic_sources, u32 resume_sources, struct device_node *node) { @@ -407,7 +407,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, int __init vic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *regs; - int irq_base; if (WARN(parent, "non-root VICs are not supported")) return -EINVAL; @@ -416,18 +415,12 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) if (WARN_ON(!regs)) return -EIO; - irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id()); - if (WARN_ON(irq_base < 0)) - goto out_unmap; - - __vic_init(regs, irq_base, ~0, ~0, node); + /* + * Passing -1 as first IRQ makes the simple domain allocate descriptors + */ + __vic_init(regs, -1, ~0, ~0, node); return 0; - - out_unmap: - iounmap(regs); - - return -EIO; } #endif /* CONFIG OF */ diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig deleted file mode 100644 index c285a9d777d9..000000000000 --- a/arch/arm/configs/afeb9260_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_AFEB9260=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_EEPROM_AT24=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_SPIDEV=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DEBUG=y -CONFIG_RTC_DRV_FM3130=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_CRC_T10DIF=y diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig index 2eef85e3c9b9..66894f736d04 100644 --- a/arch/arm/configs/ap4evb_defconfig +++ b/arch/arm/configs/ap4evb_defconfig @@ -46,7 +46,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index f78d259f8d23..2e1a82577207 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -7,6 +7,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_IPC_NS is not set # CONFIG_PID_NS is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -20,7 +21,7 @@ CONFIG_MACH_ARMADILLO800EVA=y # CONFIG_SH_TIMER_TMU is not set CONFIG_ARM_THUMB=y CONFIG_CPU_BPREDICT_DISABLE=y -# CONFIG_CACHE_L2X0 is not set +CONFIG_CACHE_L2X0=y CONFIG_ARM_ERRATA_430973=y CONFIG_ARM_ERRATA_458693=y CONFIG_ARM_ERRATA_460075=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 67bc571ed0c3..b175577d7abb 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -111,6 +111,7 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_PINCTRL_AT91=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 505b3765f87e..0ea5d2c97fc4 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -75,7 +75,7 @@ CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig index 1e8712ef062e..c87beb973b37 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -125,7 +125,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index d2050cada82d..c5212f43eee6 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -133,7 +133,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_SDIO_UART=m diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index e1b0e80b54a5..3b1881033ad8 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -96,7 +96,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 7aea70253c63..74e27f0ff6ad 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -66,8 +66,6 @@ CONFIG_TTY_PRINTK=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set -# CONFIG_PROC_FS is not set -# CONFIG_SYSFS is not set # CONFIG_MISC_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig new file mode 100644 index 000000000000..e3bf2d65618e --- /dev/null +++ b/arch/arm/configs/bcm_defconfig @@ -0,0 +1,114 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_CGROUPS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_SCHED=y +CONFIG_BLK_CGROUP=y +CONFIG_NAMESPACES=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y +CONFIG_ARCH_BCM=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_COMPACTION is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_CMDLINE="console=ttyS0,115200n8 mem=128M" +CONFIG_CPU_IDLE=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_BLK_DEV is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DW=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110 +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_LL=y +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y +CONFIG_XZ_DEC=y +CONFIG_AVERAGE=y diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig deleted file mode 100644 index 14579711d8fc..000000000000 --- a/arch/arm/configs/cam60_defconfig +++ /dev/null @@ -1,173 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_AUDIT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_CAM60=y -CONFIG_ZBOOT_ROM_BSS=0x20004000 -CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_MISC=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_CFG80211=m -CONFIG_MAC80211=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_SCSI_TGT=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_VSXXXAA=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_TEST=m -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig new file mode 100644 index 000000000000..1cd94c36321f --- /dev/null +++ b/arch/arm/configs/clps711x_defconfig @@ -0,0 +1,90 @@ +CONFIG_KERNEL_LZMA=y +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_RD_LZMA=y +CONFIG_EMBEDDED=y +CONFIG_SLOB=y +CONFIG_JUMP_LABEL=y +# CONFIG_LBDAF is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_CLPS711X=y +CONFIG_ARCH_AUTCPU12=y +CONFIG_ARCH_CDB89712=y +CONFIG_ARCH_CLEP7312=y +CONFIG_ARCH_EDB7211=y +CONFIG_ARCH_P720T=y +CONFIG_ARCH_FORTUNET=y +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_COREDUMP is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +CONFIG_IRDA=y +CONFIG_IRTTY_SIR=y +CONFIG_EP7211_DONGLE=y +# CONFIG_WIRELESS is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_AUTCPU12=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPIO=y +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_CLPS711X_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_SPI=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_CLPS711X=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_PLATFORM=y +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 4b8a25d9e686..1fd1d1de3220 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -218,7 +218,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_PXA=y diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig deleted file mode 100644 index 921480c23b98..000000000000 --- a/arch/arm/configs/cpu9260_defconfig +++ /dev/null @@ -1,116 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_CPU9260=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig deleted file mode 100644 index ea116cbdffa1..000000000000 --- a/arch/arm/configs/cpu9g20_defconfig +++ /dev/null @@ -1,116 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_CPU9G20=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 88ccde058ba4..f29223954af8 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -17,6 +17,7 @@ CONFIG_MODVERSIONS=y CONFIG_ARCH_DAVINCI=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y +CONFIG_MACH_DA8XX_DT=y CONFIG_MACH_MITYOMAPL138=y CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_DAVINCI_RESET_CLOCKS=y @@ -26,6 +27,7 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_LEDS=y +CONFIG_USE_OF=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_FREQ=y @@ -75,6 +77,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 67b5abb6f857..4ea7c95719d2 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -144,7 +144,7 @@ CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_USB_CDC_COMPOSITE=m diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig deleted file mode 100644 index d52ded350a12..000000000000 --- a/arch/arm/configs/edb7211_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -CONFIG_ARCH_CLPS711X=y -CONFIG_ARCH_EDB7211=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -# CONFIG_INPUT is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_VT is not set -CONFIG_SERIAL_CLPS711X=y -CONFIG_SERIAL_CLPS711X_CONSOLE=y -CONFIG_EXT2_FS=y -CONFIG_MINIX_FS=y -CONFIG_PARTITION_ADVANCED=y -# CONFIG_MSDOS_PARTITION is not set -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig deleted file mode 100644 index 840fced7529f..000000000000 --- a/arch/arm/configs/fortunet_defconfig +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -CONFIG_ARCH_CLPS711X=y -CONFIG_ARCH_FORTUNET=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_FASTFPE=y -CONFIG_BINFMT_AOUT=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_MTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_CLPS711X=y -CONFIG_SERIAL_CLPS711X_CONSOLE=y -CONFIG_EXT2_FS=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig deleted file mode 100644 index 4a336ab5a0c0..000000000000 --- a/arch/arm/configs/g3evm_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_SH7367=y -CONFIG_MACH_G3EVM=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200" -CONFIG_KEXEC=y -CONFIG_PM=y -# CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig deleted file mode 100644 index 21c6d0307bc3..000000000000 --- a/arch/arm/configs/g4evm_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_SH7377=y -CONFIG_MACH_G4EVM=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200" -CONFIG_KEXEC=y -CONFIG_PM=y -# CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig index 69405a762423..e16d3f372e2a 100644 --- a/arch/arm/configs/h7202_defconfig +++ b/arch/arm/configs/h7202_defconfig @@ -34,8 +34,7 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_USB_GADGET=m CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_EXT2_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index f71302c3ac33..ebbfb27e0e74 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -123,6 +123,7 @@ CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX2=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 44f117aab52c..69667133321f 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -145,15 +145,18 @@ CONFIG_GPIO_MC9S08DZ60=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_MC13XXX_SPI=y CONFIG_MFD_MC13XXX_I2C=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX3=y diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/kota2_defconfig index b7735d6347ac..fa83db1ef0eb 100644 --- a/arch/arm/configs/kota2_defconfig +++ b/arch/arm/configs/kota2_defconfig @@ -112,7 +112,6 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_RENESAS_TPU=y CONFIG_LEDS_TRIGGERS=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index c88b57886e79..afbae287436b 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -74,6 +74,8 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ST1232=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ADXL34X=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=9 @@ -119,8 +121,9 @@ CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_ASYNC_TX_DMA=y CONFIG_STAGING=y +CONFIG_SENSORS_AK8975=y +CONFIG_IIO=y # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY_USER=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig index 306a2e2d3622..2098ce155542 100644 --- a/arch/arm/configs/mackerel_defconfig +++ b/arch/arm/configs/mackerel_defconfig @@ -70,17 +70,31 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set # CONFIG_MFD_SUPPORT is not set CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SOC_SH4_FSI=y +CONFIG_USB=y +CONFIG_USB_RENESAS_USBHS_HCD=y +CONFIG_USB_RENESAS_USBHS=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -91,7 +105,6 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index a691ef4c6008..557dd291288b 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -136,7 +136,7 @@ CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_USB_GPIO_VBUS=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 53382b6c8bb4..5b8215f424c5 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -69,6 +69,10 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y +CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_THERMAL=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 00630e6af45c..a07948a87caa 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -240,7 +240,7 @@ CONFIG_USB_GADGET_S3C2410=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index dde2a1af7b39..42eab9a2a0fd 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -214,8 +214,7 @@ CONFIG_USB_TEST=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 62303043db9c..a1dc5c071e71 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -240,3 +240,6 @@ CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_SOC_OMAP5=y +CONFIG_TI_DAVINCI_MDIO=y +CONFIG_TI_DAVINCI_CPDMA=y +CONFIG_TI_CPSW=y diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index 807d4e2acb17..6a936c7c078a 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -37,7 +37,6 @@ CONFIG_SPI_SIRF=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set CONFIG_USB_GADGET=y -CONFIG_USB_FILE_STORAGE=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig deleted file mode 100644 index 42d5db1876ab..000000000000 --- a/arch/arm/configs/qil-a9260_defconfig +++ /dev/null @@ -1,114 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_QIL_A9260=y -CONFIG_AT91_SLOW_CLOCK=y -CONFIG_AT91_EARLY_USART0=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS1,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_M41T94=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig deleted file mode 100644 index b4384af1bea6..000000000000 --- a/arch/arm/configs/sam9_l9260_defconfig +++ /dev/null @@ -1,148 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_SAM9_L9260=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=25 -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_RAID_ATTRS=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1553=y -CONFIG_RTC_DRV_DS1742=y -CONFIG_RTC_DRV_M48T86=y -CONFIG_RTC_DRV_V3020=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_CODEPAGE_950=y -CONFIG_NLS_CODEPAGE_932=y -CONFIG_NLS_CODEPAGE_949=y -CONFIG_NLS_CODEPAGE_874=y -CONFIG_NLS_ISO8859_8=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index df77931a4326..2e0419d1b964 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -214,7 +214,7 @@ CONFIG_USB_GADGET_DUMMY_HCD=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_PXA=y diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig deleted file mode 100644 index 52f1488591c7..000000000000 --- a/arch/arm/configs/stamp9g20_defconfig +++ /dev/null @@ -1,128 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_TREE_PREEMPT_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_PORTUXG20=y -CONFIG_MACH_STAMP9G20=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AT91_SLOW_CLOCK=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_KEXEC=y -CONFIG_CPU_IDLE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_SPIDEV=y -CONFIG_GPIO_SYSFS=y -CONFIG_W1=y -CONFIG_W1_MASTER_GPIO=y -CONFIG_W1_SLAVE_THERM=y -CONFIG_W1_SLAVE_DS2431=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=m -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index e2184f6c20b3..a7827fd0616f 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -80,6 +80,10 @@ CONFIG_RFKILL_GPIO=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_CMA=y +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_AD525X_DPOT=y @@ -98,12 +102,12 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_BRCMFMAC=m CONFIG_RT2X00=y CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y -# CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y @@ -116,7 +120,8 @@ CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y -CONFIG_SPI_TEGRA=y +CONFIG_SPI_TEGRA20_SFLASH=y +CONFIG_SPI_TEGRA20_SLINK=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y @@ -138,6 +143,15 @@ CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m +CONFIG_DRM=y +CONFIG_DRM_TEGRA=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set @@ -205,6 +219,9 @@ CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 6fe7ede6f0c2..231dca604737 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -69,6 +69,8 @@ CONFIG_GPIO_TC3589X=y CONFIG_POWER_SUPPLY=y CONFIG_AB8500_BM=y CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig deleted file mode 100644 index a1501e1e1a90..000000000000 --- a/arch/arm/configs/usb-a9260_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_USB_A9260=y -CONFIG_AT91_SLOW_CLOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 1d01ddd33122..d36e0d3c86ec 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -139,7 +139,7 @@ CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_GADGET=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 547a3c1e59db..731d4f985310 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -143,7 +143,7 @@ CONFIG_USB_GADGET=m CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=y diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index f70ae175a3d6..d3db39860b9c 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -16,7 +16,6 @@ generic-y += local64.h generic-y += msgbuf.h generic-y += param.h generic-y += parport.h -generic-y += percpu.h generic-y += poll.h generic-y += resource.h generic-y += sections.h @@ -31,5 +30,6 @@ generic-y += sockios.h generic-y += termbits.h generic-y += termios.h generic-y += timex.h +generic-y += trace_clock.h generic-y += types.h generic-y += unaligned.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 2ef95813fce0..eb87200aa4b5 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -250,6 +250,7 @@ * Beware, it also clobers LR. */ .macro safe_svcmode_maskall reg:req +#if __LINUX_ARM_ARCH__ >= 6 mrs \reg , cpsr mov lr , \reg and lr , lr , #MODE_MASK @@ -266,6 +267,13 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) __ERET 1: msr cpsr_c, \reg 2: +#else +/* + * workaround for possibly broken pre-v6 hardware + * (akita, Sharp Zaurus C-1000, PXA270-based) + */ + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, \reg +#endif .endm /* diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h index d797223b39d5..2744f0602550 100644 --- a/arch/arm/include/asm/cpu.h +++ b/arch/arm/include/asm/cpu.h @@ -15,6 +15,7 @@ struct cpuinfo_arm { struct cpu cpu; + u32 cpuid; #ifdef CONFIG_SMP unsigned int loops_per_jiffy; #endif diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index cb47d28cbe1f..a59dcb5ab5fc 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -25,6 +25,19 @@ #define CPUID_EXT_ISAR4 "c2, 4" #define CPUID_EXT_ISAR5 "c2, 5" +#define MPIDR_SMP_BITMASK (0x3 << 30) +#define MPIDR_SMP_VALUE (0x2 << 30) + +#define MPIDR_MT_BITMASK (0x1 << 24) + +#define MPIDR_HWID_BITMASK 0xFFFFFF + +#define MPIDR_LEVEL_BITS 8 +#define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1) + +#define MPIDR_AFFINITY_LEVEL(mpidr, level) \ + ((mpidr >> (MPIDR_LEVEL_BITS * level)) & MPIDR_LEVEL_MASK) + extern unsigned int processor_id; #ifdef CONFIG_CPU_CP15 diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h index a0ada3ea4358..f2e5cad3f306 100644 --- a/arch/arm/include/asm/cti.h +++ b/arch/arm/include/asm/cti.h @@ -146,15 +146,7 @@ static inline void cti_irq_ack(struct cti *cti) */ static inline void cti_unlock(struct cti *cti) { - void __iomem *base = cti->base; - unsigned long val; - - val = __raw_readl(base + LOCKSTATUS); - - if (val & 1) { - val = LOCKCODE; - __raw_writel(val, base + LOCKACCESS); - } + __raw_writel(LOCKCODE, cti->base + LOCKACCESS); } /** @@ -166,14 +158,6 @@ static inline void cti_unlock(struct cti *cti) */ static inline void cti_lock(struct cti *cti) { - void __iomem *base = cti->base; - unsigned long val; - - val = __raw_readl(base + LOCKSTATUS); - - if (!(val & 1)) { - val = ~LOCKCODE; - __raw_writel(val, base + LOCKACCESS); - } + __raw_writel(~LOCKCODE, cti->base + LOCKACCESS); } #endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index c4c87bc12231..3b2c40b5bfa2 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -102,6 +102,10 @@ #define L2X0_ADDR_FILTER_EN 1 +#define L2X0_CTRL_EN 1 + +#define L2X0_WAY_SIZE_SHIFT 3 + #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask); #if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF) @@ -126,6 +130,7 @@ struct l2x0_regs { unsigned long filter_end; unsigned long prefetch_ctrl; unsigned long pwr_ctrl; + unsigned long ctrl; }; extern struct l2x0_regs l2x0_saved_regs; diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index 6b9b077d86b3..6636430dd0e6 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -50,11 +50,7 @@ #define SCPCELLID2 0xFF8 #define SCPCELLID3 0xFFC -#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) -#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) - -#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) -#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) +#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2)) static inline void sysctl_soft_reset(void __iomem *base) { diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h index e14af1a1a320..2bebad36fc83 100644 --- a/arch/arm/include/asm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -47,7 +47,7 @@ struct device_node; struct pt_regs; -void __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, +void __vic_init(void __iomem *base, int irq_start, u32 vic_sources, u32 resume_sources, struct device_node *node); void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); int vic_of_init(struct device_node *node, struct device_node *parent); diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index c190bc992f0e..01169dd723f1 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -98,12 +98,12 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_BASE_WCR 112 /* Accessor macros for the debug registers. */ -#define ARM_DBG_READ(M, OP2, VAL) do {\ - asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\ +#define ARM_DBG_READ(N, M, OP2, VAL) do {\ + asm volatile("mrc p14, 0, %0, " #N "," #M ", " #OP2 : "=r" (VAL));\ } while (0) -#define ARM_DBG_WRITE(M, OP2, VAL) do {\ - asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\ +#define ARM_DBG_WRITE(N, M, OP2, VAL) do {\ + asm volatile("mcr p14, 0, %0, " #N "," #M ", " #OP2 : : "r" (VAL));\ } while (0) struct notifier_block; diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 42f042ee4ada..652b56086de7 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -374,7 +374,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #ifdef CONFIG_MMU #define ARCH_HAS_VALID_PHYS_ADDR_RANGE -extern int valid_phys_addr_range(unsigned long addr, size_t size); +extern int valid_phys_addr_range(phys_addr_t addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); extern int devmem_is_allowed(unsigned long pfn); #endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 195ac2f9d3d3..2fe141fcc8d6 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -40,6 +40,13 @@ extern void iotable_init(struct map_desc *, int); extern void vm_reserve_area_early(unsigned long addr, unsigned long size, void *caller); +#ifdef CONFIG_DEBUG_LL +extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr); +extern void debug_ll_io_init(void); +#else +static inline void debug_ll_io_init(void) {} +#endif + struct mem_type; extern const struct mem_type *get_mem_type(unsigned int type); /* diff --git a/arch/arm/include/asm/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h deleted file mode 100644 index ea6d063923b8..000000000000 --- a/arch/arm/include/asm/mach/serial_at91.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/include/asm/mach/serial_at91.h - * - * Based on serial_sa1100.h by Nicolas Pitre - * - * Copyright (C) 2002 ATMEL Rousset - * - * Low level machine dependent UART functions. - */ - -struct uart_port; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct atmel_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*enable_ms)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); - int (*open)(struct uart_port *); - void (*close)(struct uart_port *); -}; - -#if defined(CONFIG_SERIAL_ATMEL) -void atmel_register_uart_fns(struct atmel_port_fns *fns); -#else -#define atmel_register_uart_fns(fns) do { } while (0) -#endif - - diff --git a/arch/arm/include/asm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h deleted file mode 100644 index d09064bf95a0..000000000000 --- a/arch/arm/include/asm/mach/serial_sa1100.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/mach/serial_sa1100.h - * - * Author: Nicolas Pitre - * - * Moved and changed lots, Russell King - * - * Low level machine dependent UART functions. - */ - -struct uart_port; -struct uart_info; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct sa1100_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); -}; - -#ifdef CONFIG_SERIAL_SA1100 -void sa1100_register_uart_fns(struct sa1100_port_fns *fns); -void sa1100_register_uart(int idx, int port); -#else -#define sa1100_register_uart_fns(fns) do { } while (0) -#define sa1100_register_uart(idx,port) do { } while (0) -#endif diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h deleted file mode 100644 index ea297ac70bc6..000000000000 --- a/arch/arm/include/asm/mach/udc_pxa2xx.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/include/asm/mach/udc_pxa2xx.h - * - * This supports machine-specific differences in how the PXA2xx - * USB Device Controller (UDC) is wired. - * - * It is set in linux/arch/arm/mach-pxa/<machine>.c or in - * linux/arch/mach-ixp4xx/<machine>.c and used in - * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c - */ - -struct pxa2xx_udc_mach_info { - int (*udc_is_connected)(void); /* do we see host? */ - void (*udc_command)(int cmd); -#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ -#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ - - /* Boards following the design guidelines in the developer's manual, - * with on-chip GPIOs not Lubbock's weird hardware, can have a sane - * VBUS IRQ and omit the methods above. Store the GPIO number - * here. Note that sometimes the signals go through inverters... - */ - bool gpio_pullup_inverted; - int gpio_pullup; /* high == pullup activated */ -}; - diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 14965658a923..9f77e7804f3b 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -5,18 +5,15 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID - unsigned int id; - raw_spinlock_t id_lock; + u64 id; #endif - unsigned int kvm_seq; + unsigned int vmalloc_seq; } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID -#define ASID(mm) ((mm)->context.id & 255) - -/* init_mm.context.id_lock should be initialized. */ -#define INIT_MM_CONTEXT(name) \ - .context.id_lock = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock), +#define ASID_BITS 8 +#define ASID_MASK ((~0ULL) << ASID_BITS) +#define ASID(mm) ((mm)->context.id & ~ASID_MASK) #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 0306bc642c0d..e1f644bc7cc5 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -20,88 +20,12 @@ #include <asm/proc-fns.h> #include <asm-generic/mm_hooks.h> -void __check_kvm_seq(struct mm_struct *mm); +void __check_vmalloc_seq(struct mm_struct *mm); #ifdef CONFIG_CPU_HAS_ASID -/* - * On ARMv6, we have the following structure in the Context ID: - * - * 31 7 0 - * +-------------------------+-----------+ - * | process ID | ASID | - * +-------------------------+-----------+ - * | context ID | - * +-------------------------------------+ - * - * The ASID is used to tag entries in the CPU caches and TLBs. - * The context ID is used by debuggers and trace logic, and - * should be unique within all running processes. - */ -#define ASID_BITS 8 -#define ASID_MASK ((~0) << ASID_BITS) -#define ASID_FIRST_VERSION (1 << ASID_BITS) - -extern unsigned int cpu_last_asid; - -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm); -void __new_context(struct mm_struct *mm); -void cpu_set_reserved_ttbr0(void); - -static inline void switch_new_context(struct mm_struct *mm) -{ - unsigned long flags; - - __new_context(mm); - - local_irq_save(flags); - cpu_switch_mm(mm->pgd, mm); - local_irq_restore(flags); -} - -static inline void check_and_switch_context(struct mm_struct *mm, - struct task_struct *tsk) -{ - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); - - /* - * Required during context switch to avoid speculative page table - * walking with the wrong TTBR. - */ - cpu_set_reserved_ttbr0(); - - if (!((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) - /* - * The ASID is from the current generation, just switch to the - * new pgd. This condition is only true for calls from - * context_switch() and interrupts are already disabled. - */ - cpu_switch_mm(mm->pgd, mm); - else if (irqs_disabled()) - /* - * Defer the new ASID allocation until after the context - * switch critical region since __new_context() cannot be - * called with interrupts disabled (it sends IPIs). - */ - set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM); - else - /* - * That is a direct call to switch_mm() or activate_mm() with - * interrupts enabled and a new context. - */ - switch_new_context(mm); -} - -#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0) - -#define finish_arch_post_lock_switch \ - finish_arch_post_lock_switch -static inline void finish_arch_post_lock_switch(void) -{ - if (test_and_clear_thread_flag(TIF_SWITCH_MM)) - switch_new_context(current->mm); -} +void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); +#define init_new_context(tsk,mm) ({ mm->context.id = 0; }) #else /* !CONFIG_CPU_HAS_ASID */ @@ -110,8 +34,8 @@ static inline void finish_arch_post_lock_switch(void) static inline void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) { - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); + if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq)) + __check_vmalloc_seq(mm); if (irqs_disabled()) /* @@ -143,6 +67,7 @@ static inline void finish_arch_post_lock_switch(void) #endif /* CONFIG_CPU_HAS_ASID */ #define destroy_context(mm) do { } while(0) +#define activate_mm(prev,next) switch_mm(prev, next, NULL) /* * This is called when "tsk" is about to enter lazy TLB mode. @@ -186,6 +111,5 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, } #define deactivate_mm(tsk,mm) do { } while (0) -#define activate_mm(prev,next) switch_mm(prev, next, NULL) #endif diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h new file mode 100644 index 000000000000..968c0a14e0a3 --- /dev/null +++ b/arch/arm/include/asm/percpu.h @@ -0,0 +1,45 @@ +/* + * Copyright 2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_ARM_PERCPU_H_ +#define _ASM_ARM_PERCPU_H_ + +/* + * Same as asm-generic/percpu.h, except that we store the per cpu offset + * in the TPIDRPRW. TPIDRPRW only exists on V6K and V7 + */ +#if defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6) +static inline void set_my_cpu_offset(unsigned long off) +{ + /* Set TPIDRPRW */ + asm volatile("mcr p15, 0, %0, c13, c0, 4" : : "r" (off) : "memory"); +} + +static inline unsigned long __my_cpu_offset(void) +{ + unsigned long off; + /* Read TPIDRPRW */ + asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory"); + return off; +} +#define __my_cpu_offset __my_cpu_offset() +#else +#define set_my_cpu_offset(x) do {} while(0) + +#endif /* CONFIG_SMP */ + +#include <asm-generic/percpu.h> + +#endif /* _ASM_ARM_PERCPU_H_ */ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 625cd621a436..755877527cf9 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -21,4 +21,11 @@ #define C(_x) PERF_COUNT_HW_CACHE_##_x #define CACHE_OP_UNSUPPORTED 0xFFFF +#ifdef CONFIG_HW_PERF_EVENTS +struct pt_regs; +extern unsigned long perf_instruction_pointer(struct pt_regs *regs); +extern unsigned long perf_misc_flags(struct pt_regs *regs); +#define perf_misc_flags(regs) perf_misc_flags(regs) +#endif + #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 2317a71c8f8e..f97ee02386ee 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -115,6 +115,7 @@ * The PTE table pointer refers to the hardware entries; the "Linux" * entries are stored 1024 bytes below. */ +#define L_PTE_VALID (_AT(pteval_t, 1) << 0) /* Valid */ #define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) #define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) #define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ @@ -123,6 +124,7 @@ #define L_PTE_USER (_AT(pteval_t, 1) << 8) #define L_PTE_XN (_AT(pteval_t, 1) << 9) #define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ +#define L_PTE_NONE (_AT(pteval_t, 1) << 11) /* * These are the memory types, defined to be compatible with diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index b24903549d1c..a3f37929940a 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -67,7 +67,8 @@ * These bits overlap with the hardware bits but the naming is preserved for * consistency with the classic page table format. */ -#define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Valid */ +#define L_PTE_VALID (_AT(pteval_t, 1) << 0) /* Valid */ +#define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Present */ #define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ #define L_PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */ #define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) /* AP[2] */ @@ -76,6 +77,7 @@ #define L_PTE_XN (_AT(pteval_t, 1) << 54) /* XN */ #define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) /* unused */ #define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */ +#define L_PTE_NONE (_AT(pteval_t, 1) << 57) /* PROT_NONE */ /* * To be used in assembly code with the upper page attributes. diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 08c12312a1f9..9c82f988c0e3 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -73,7 +73,7 @@ extern pgprot_t pgprot_kernel; #define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b)) -#define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY) +#define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY | L_PTE_NONE) #define PAGE_SHARED _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN) #define PAGE_SHARED_EXEC _MOD_PROT(pgprot_user, L_PTE_USER) #define PAGE_COPY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) @@ -83,7 +83,7 @@ extern pgprot_t pgprot_kernel; #define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN) #define PAGE_KERNEL_EXEC pgprot_kernel -#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN) +#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE) #define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN) #define __PAGE_SHARED_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER) #define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) @@ -203,9 +203,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) #define pte_special(pte) (0) -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) +#define pte_present_user(pte) (pte_present(pte) && (pte_val(pte) & L_PTE_USER)) #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) @@ -242,7 +240,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER; + const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER | L_PTE_NONE; pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); return pte; } diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index a26170dce02e..f24edad26c70 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -67,19 +67,19 @@ struct arm_pmu { cpumask_t active_irqs; char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); - void (*enable)(struct hw_perf_event *evt, int idx); - void (*disable)(struct hw_perf_event *evt, int idx); + void (*enable)(struct perf_event *event); + void (*disable)(struct perf_event *event); int (*get_event_idx)(struct pmu_hw_events *hw_events, - struct hw_perf_event *hwc); + struct perf_event *event); int (*set_event_filter)(struct hw_perf_event *evt, struct perf_event_attr *attr); - u32 (*read_counter)(int idx); - void (*write_counter)(int idx, u32 val); - void (*start)(void); - void (*stop)(void); + u32 (*read_counter)(struct perf_event *event); + void (*write_counter)(struct perf_event *event, u32 val); + void (*start)(struct arm_pmu *); + void (*stop)(struct arm_pmu *); void (*reset)(void *); - int (*request_irq)(irq_handler_t handler); - void (*free_irq)(void); + int (*request_irq)(struct arm_pmu *, irq_handler_t handler); + void (*free_irq)(struct arm_pmu *); int (*map_event)(struct perf_event *event); int num_events; atomic_t active_events; @@ -93,15 +93,11 @@ struct arm_pmu { extern const struct dev_pm_ops armpmu_dev_pm_ops; -int armpmu_register(struct arm_pmu *armpmu, char *name, int type); +int armpmu_register(struct arm_pmu *armpmu, int type); -u64 armpmu_event_update(struct perf_event *event, - struct hw_perf_event *hwc, - int idx); +u64 armpmu_event_update(struct perf_event *event); -int armpmu_event_set_period(struct perf_event *event, - struct hw_perf_event *hwc, - int idx); +int armpmu_event_set_period(struct perf_event *event); int armpmu_map_event(struct perf_event *event, const unsigned (*event_map)[PERF_COUNT_HW_MAX], diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index aeae9c609df4..a219227c3e43 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -11,10 +11,13 @@ #ifndef __ASMARM_PROM_H #define __ASMARM_PROM_H +#define HAVE_ARCH_DEVTREE_FIXUPS + #ifdef CONFIG_OF extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); extern void arm_dt_memblock_reserve(void); +extern void __init arm_dt_init_cpu_maps(void); #else /* CONFIG_OF */ @@ -24,6 +27,7 @@ static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys) } static inline void arm_dt_memblock_reserve(void) { } +static inline void arm_dt_init_cpu_maps(void) { } #endif /* CONFIG_OF */ #endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h index 5a7963dbd3fb..9a0ea6ab988f 100644 --- a/arch/arm/include/asm/signal.h +++ b/arch/arm/include/asm/signal.h @@ -35,5 +35,4 @@ struct k_sigaction { }; #include <asm/sigcontext.h> -#define ptrace_signal_deliver(regs, cookie) do { } while (0) #endif diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 2e3be16c6766..d3a22bebe6ce 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -79,6 +79,7 @@ extern void cpu_die(void); extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask); struct smp_operations { #ifdef CONFIG_SMP diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index 558d6c80aca9..aaa61b6f50ff 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -5,6 +5,9 @@ #ifndef __ASMARM_SMP_PLAT_H #define __ASMARM_SMP_PLAT_H +#include <linux/cpumask.h> +#include <linux/err.h> + #include <asm/cputype.h> /* @@ -48,5 +51,19 @@ static inline int cache_ops_need_broadcast(void) */ extern int __cpu_logical_map[]; #define cpu_logical_map(cpu) __cpu_logical_map[cpu] +/* + * Retrieve logical cpu index corresponding to a given MPIDR[23:0] + * - mpidr: MPIDR[23:0] to be used for the look-up + * + * Returns the cpu logical index or -EINVAL on look-up error + */ +static inline int get_logical_index(u32 mpidr) +{ + int cpu; + for (cpu = 0; cpu < nr_cpu_ids; cpu++) + if (cpu_logical_map(cpu) == mpidr) + return cpu; + return -EINVAL; +} #endif diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index 9fdded6b1089..f1d96d4e8092 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h @@ -7,6 +7,8 @@ #ifndef _ASM_ARM_SYSCALL_H #define _ASM_ARM_SYSCALL_H +#include <linux/audit.h> /* for AUDIT_ARCH_* */ +#include <linux/elf.h> /* for ELF_EM */ #include <linux/err.h> #include <linux/sched.h> @@ -95,4 +97,11 @@ static inline void syscall_set_arguments(struct task_struct *task, memcpy(®s->ARM_r0 + i, args, n * sizeof(args[0])); } +static inline int syscall_get_arch(struct task_struct *task, + struct pt_regs *regs) +{ + /* ARM tasks don't change audit architectures on the fly. */ + return AUDIT_ARCH_ARM; +} + #endif /* _ASM_ARM_SYSCALL_H */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 8477b4c1d39f..cddda1f41f0f 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -151,10 +151,10 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 #define TIF_SYSCALL_TRACEPOINT 10 +#define TIF_SECCOMP 11 /* seccomp syscall filtering active */ #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 -#define TIF_SECCOMP 21 #define TIF_SWITCH_MM 22 /* deferred switch_mm */ #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -163,11 +163,12 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) -#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 8f60b6e6bd41..7cd13cc62624 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -42,6 +42,9 @@ #define __ARCH_WANT_SYS_SOCKETCALL #endif #define __ARCH_WANT_SYS_EXECVE +#define __ARCH_WANT_SYS_FORK +#define __ARCH_WANT_SYS_VFORK +#define __ARCH_WANT_SYS_CLONE /* * "Conditional" syscalls diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S new file mode 100644 index 000000000000..04eb56d5db2c --- /dev/null +++ b/arch/arm/include/debug/sunxi.S @@ -0,0 +1,27 @@ +/* + * Early serial output macro for Allwinner A1X SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#if defined(CONFIG_DEBUG_SUNXI_UART0) +#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28000 +#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28000 +#elif defined(CONFIG_DEBUG_SUNXI_UART1) +#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400 +#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400 +#endif + + .macro addruart, rp, rv, tmp + ldr \rp, =SUNXI_UART_DEBUG_PHYS_BASE + ldr \rv, =SUNXI_UART_DEBUG_VIRT_BASE + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S new file mode 100644 index 000000000000..883d7c22fd9d --- /dev/null +++ b/arch/arm/include/debug/tegra.S @@ -0,0 +1,223 @@ +/* + * Copyright (C) 2010,2011 Google, Inc. + * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. + * + * Author: + * Colin Cross <ccross@google.com> + * Erik Gilling <konkers@google.com> + * Doug Anderson <dianders@chromium.org> + * Stephen Warren <swarren@nvidia.com> + * + * Portions based on mach-omap2's debug-macro.S + * Copyright (C) 1994-1999 Russell King + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/serial_reg.h> + +#define UART_SHIFT 2 + +/* Physical addresses */ +#define TEGRA_CLK_RESET_BASE 0x60006000 +#define TEGRA_APB_MISC_BASE 0x70000000 +#define TEGRA_UARTA_BASE 0x70006000 +#define TEGRA_UARTB_BASE 0x70006040 +#define TEGRA_UARTC_BASE 0x70006200 +#define TEGRA_UARTD_BASE 0x70006300 +#define TEGRA_UARTE_BASE 0x70006400 +#define TEGRA_PMC_BASE 0x7000e400 + +#define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04) +#define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08) +#define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c) +#define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10) +#define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14) +#define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18) +#define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0) +#define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804) + +/* + * Must be 1MB-aligned since a 1MB mapping is used early on. + * Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[]. + */ +#define UART_VIRTUAL_BASE 0xfe100000 + +#define checkuart(rp, rv, lhu, bit, uart) \ + /* Load address of CLK_RST register */ \ + movw rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \ + movt rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \ + /* Load value from CLK_RST register */ \ + ldr rp, [rp, #0] ; \ + /* Test UART's reset bit */ \ + tst rp, #(1 << bit) ; \ + /* If set, can't use UART; jump to save no UART */ \ + bne 90f ; \ + /* Load address of CLK_OUT_ENB register */ \ + movw rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \ + movt rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \ + /* Load value from CLK_OUT_ENB register */ \ + ldr rp, [rp, #0] ; \ + /* Test UART's clock enable bit */ \ + tst rp, #(1 << bit) ; \ + /* If clear, can't use UART; jump to save no UART */ \ + beq 90f ; \ + /* Passed all tests, load address of UART registers */ \ + movw rp, #TEGRA_UART##uart##_BASE & 0xffff ; \ + movt rp, #TEGRA_UART##uart##_BASE >> 16 ; \ + /* Jump to save UART address */ \ + b 91f + + .macro addruart, rp, rv, tmp + adr \rp, 99f @ actual addr of 99f + ldr \rv, [\rp] @ linked addr is stored there + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ linked tegra_uart_config + sub \tmp, \rp, \rv @ actual tegra_uart_config + ldr \rp, [\tmp] @ Load tegra_uart_config + cmp \rp, #1 @ needs initialization? + bne 100f @ no; go load the addresses + mov \rv, #0 @ yes; record init is done + str \rv, [\tmp] + +#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA + /* Check ODMDATA */ +10: movw \rp, #TEGRA_PMC_SCRATCH20 & 0xffff + movt \rp, #TEGRA_PMC_SCRATCH20 >> 16 + ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20 + ubfx \rv, \rp, #18, #2 @ 19:18 are console type + cmp \rv, #2 @ 2 and 3 mean DCC, UART + beq 11f @ some boards swap the meaning + cmp \rv, #3 @ so accept either + bne 90f +11: ubfx \rv, \rp, #15, #3 @ 17:15 are UART ID + cmp \rv, #0 @ UART 0? + beq 20f + cmp \rv, #1 @ UART 1? + beq 21f + cmp \rv, #2 @ UART 2? + beq 22f + cmp \rv, #3 @ UART 3? + beq 23f + cmp \rv, #4 @ UART 4? + beq 24f + b 90f @ invalid +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART A validity */ +20: checkuart(\rp, \rv, L, 6, A) +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART B validity */ +21: checkuart(\rp, \rv, L, 7, B) +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART C validity */ +22: checkuart(\rp, \rv, H, 23, C) +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART D validity */ +23: checkuart(\rp, \rv, U, 1, D) +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART E validity */ +24: + checkuart(\rp, \rv, U, 2, E) +#endif + + /* No valid UART found */ +90: mov \rp, #0 + /* fall through */ + + /* Record whichever UART we chose */ +91: str \rp, [\tmp, #4] @ Store in tegra_uart_phys + cmp \rp, #0 @ Valid UART address? + bne 92f @ Yes, go process it + str \rp, [\tmp, #8] @ Store 0 in tegra_uart_virt + b 100f @ Done +92: and \rv, \rp, #0xffffff @ offset within 1MB section + add \rv, \rv, #UART_VIRTUAL_BASE + str \rv, [\tmp, #8] @ Store in tegra_uart_virt + movw \rv, #TEGRA_APB_MISC_GP_HIDREV & 0xffff + movt \rv, #TEGRA_APB_MISC_GP_HIDREV >> 16 + ldr \rv, [\rv, #0] @ Load HIDREV + ubfx \rv, \rv, #8, #8 @ 15:8 are SoC version + cmp \rv, #0x20 @ Tegra20? + moveq \rv, #0x75 @ Tegra20 divisor + movne \rv, #0xdd @ Tegra30 divisor + str \rv, [\tmp, #12] @ Save divisor to scratch + /* uart[UART_LCR] = UART_LCR_WLEN8 | UART_LCR_DLAB; */ + mov \rv, #UART_LCR_WLEN8 | UART_LCR_DLAB + str \rv, [\rp, #UART_LCR << UART_SHIFT] + /* uart[UART_DLL] = div & 0xff; */ + ldr \rv, [\tmp, #12] + and \rv, \rv, #0xff + str \rv, [\rp, #UART_DLL << UART_SHIFT] + /* uart[UART_DLM] = div >> 8; */ + ldr \rv, [\tmp, #12] + lsr \rv, \rv, #8 + str \rv, [\rp, #UART_DLM << UART_SHIFT] + /* uart[UART_LCR] = UART_LCR_WLEN8; */ + mov \rv, #UART_LCR_WLEN8 + str \rv, [\rp, #UART_LCR << UART_SHIFT] + b 100f + + .align +99: .word . + .word tegra_uart_config + .ltorg + + /* Load previously selected UART address */ +100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys + ldr \rv, [\tmp, #8] @ Load tegra_uart_virt + .endm + +/* + * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra + * check to make sure that the UART address is actually valid. + */ + + .macro senduart, rd, rx + cmp \rx, #0 + strneb \rd, [\rx, #UART_TX << UART_SHIFT] +1001: + .endm + + .macro busyuart, rd, rx + cmp \rx, #0 + beq 1002f +1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1001b +1002: + .endm + + .macro waituart, rd, rx +#ifdef FLOW_CONTROL + cmp \rx, #0 + beq 1002f +1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +1002: +#endif + .endm diff --git a/arch/arm/include/debug/vexpress.S b/arch/arm/include/debug/vexpress.S index 9f509f55d078..dc8e882a6257 100644 --- a/arch/arm/include/debug/vexpress.S +++ b/arch/arm/include/debug/vexpress.S @@ -21,14 +21,17 @@ #if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT) .macro addruart,rp,rv,tmp + .arch armv7-a @ Make an educated guess regarding the memory map: - @ - the original A9 core tile, which has MPCore peripherals - @ located at 0x1e000000, should use UART at 0x10009000 + @ - the original A9 core tile (based on ARM Cortex-A9 r0p1) + @ should use UART at 0x10009000 @ - all other (RS1 complaint) tiles use UART mapped @ at 0x1c090000 - mrc p15, 4, \tmp, c15, c0, 0 - cmp \tmp, #0x1e000000 + mrc p15, 0, \rp, c0, c0, 0 + movw \rv, #0xc091 + movt \rv, #0x410f + cmp \rp, \rv @ Original memory map moveq \rp, #DEBUG_LL_UART_OFFSET diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/include/debug/zynq.S index 3ab0be1f6191..f9aa9740a73f 100644 --- a/arch/arm/mach-zynq/include/mach/debug-macro.S +++ b/arch/arm/include/debug/zynq.S @@ -1,5 +1,4 @@ -/* arch/arm/mach-zynq/include/mach/debug-macro.S - * +/* * Debugging macro include header * * Copyright (C) 2011 Xilinx @@ -13,9 +12,25 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ +#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */ +#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */ +#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */ + +#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */ +#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ + +#define UART0_PHYS 0xE0000000 +#define UART1_PHYS 0xE0001000 +#define UART_SIZE SZ_4K +#define UART_VIRT 0xF0001000 + +#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) +# define LL_UART_PADDR UART1_PHYS +#else +# define LL_UART_PADDR UART0_PHYS +#endif -#include <mach/zynq_soc.h> -#include <mach/uart.h> +#define LL_UART_VADDR UART_VIRT .macro addruart, rp, rv, tmp ldr \rp, =LL_UART_PADDR @ physical diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 831cd38c8d99..5935b6a02e6e 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -11,7 +11,7 @@ */ /* 0 */ CALL(sys_restart_syscall) CALL(sys_exit) - CALL(sys_fork_wrapper) + CALL(sys_fork) CALL(sys_read) CALL(sys_write) /* 5 */ CALL(sys_open) @@ -129,7 +129,7 @@ CALL(OBSOLETE(ABI(sys_ipc, sys_oabi_ipc))) CALL(sys_fsync) CALL(sys_sigreturn_wrapper) -/* 120 */ CALL(sys_clone_wrapper) +/* 120 */ CALL(sys_clone) CALL(sys_setdomainname) CALL(sys_newuname) CALL(sys_ni_syscall) /* modify_ldt */ @@ -199,7 +199,7 @@ CALL(sys_sendfile) CALL(sys_ni_syscall) /* getpmsg */ CALL(sys_ni_syscall) /* putpmsg */ -/* 190 */ CALL(sys_vfork_wrapper) +/* 190 */ CALL(sys_vfork) CALL(sys_getrlimit) CALL(sys_mmap2) CALL(ABI(sys_truncate64, sys_oabi_truncate64)) diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 66f711b2e0e8..6809200c31fb 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -100,6 +100,13 @@ ENTRY(printch) b 1b ENDPROC(printch) +ENTRY(debug_ll_addr) + addruart r2, r3, ip + str r2, [r0] + str r3, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) + #else ENTRY(printascii) @@ -119,4 +126,11 @@ ENTRY(printch) mov pc, lr ENDPROC(printch) +ENTRY(debug_ll_addr) + mov r2, #0 + str r2, [r0] + str r2, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) + #endif diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index bee7f9d47f02..70f1bdeb241b 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -19,8 +19,10 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/cputype.h> #include <asm/setup.h> #include <asm/page.h> +#include <asm/smp_plat.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -61,6 +63,108 @@ void __init arm_dt_memblock_reserve(void) } } +/* + * arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree + * and builds the cpu logical map array containing MPIDR values related to + * logical cpus + * + * Updates the cpu possible mask with the number of parsed cpu nodes + */ +void __init arm_dt_init_cpu_maps(void) +{ + /* + * Temp logical map is initialized with UINT_MAX values that are + * considered invalid logical map entries since the logical map must + * contain a list of MPIDR[23:0] values where MPIDR[31:24] must + * read as 0. + */ + struct device_node *cpu, *cpus; + u32 i, j, cpuidx = 1; + u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0; + + u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = UINT_MAX }; + bool bootcpu_valid = false; + cpus = of_find_node_by_path("/cpus"); + + if (!cpus) + return; + + for_each_child_of_node(cpus, cpu) { + u32 hwid; + + pr_debug(" * %s...\n", cpu->full_name); + /* + * A device tree containing CPU nodes with missing "reg" + * properties is considered invalid to build the + * cpu_logical_map. + */ + if (of_property_read_u32(cpu, "reg", &hwid)) { + pr_debug(" * %s missing reg property\n", + cpu->full_name); + return; + } + + /* + * 8 MSBs must be set to 0 in the DT since the reg property + * defines the MPIDR[23:0]. + */ + if (hwid & ~MPIDR_HWID_BITMASK) + return; + + /* + * Duplicate MPIDRs are a recipe for disaster. + * Scan all initialized entries and check for + * duplicates. If any is found just bail out. + * temp values were initialized to UINT_MAX + * to avoid matching valid MPIDR[23:0] values. + */ + for (j = 0; j < cpuidx; j++) + if (WARN(tmp_map[j] == hwid, "Duplicate /cpu reg " + "properties in the DT\n")) + return; + + /* + * Build a stashed array of MPIDR values. Numbering scheme + * requires that if detected the boot CPU must be assigned + * logical id 0. Other CPUs get sequential indexes starting + * from 1. If a CPU node with a reg property matching the + * boot CPU MPIDR is detected, this is recorded so that the + * logical map built from DT is validated and can be used + * to override the map created in smp_setup_processor_id(). + */ + if (hwid == mpidr) { + i = 0; + bootcpu_valid = true; + } else { + i = cpuidx++; + } + + if (WARN(cpuidx > nr_cpu_ids, "DT /cpu %u nodes greater than " + "max cores %u, capping them\n", + cpuidx, nr_cpu_ids)) { + cpuidx = nr_cpu_ids; + break; + } + + tmp_map[i] = hwid; + } + + if (WARN(!bootcpu_valid, "DT missing boot CPU MPIDR[23:0], " + "fall back to default cpu_logical_map\n")) + return; + + /* + * Since the boot CPU node contains proper data, and all nodes have + * a reg property, the DT CPU list can be considered valid and the + * logical map created in smp_setup_processor_id() can be overridden + */ + for (i = 0; i < cpuidx; i++) { + set_cpu_possible(i, true); + cpu_logical_map(i) = tmp_map[i]; + pr_debug("cpu logical map 0x%x\n", cpu_logical_map(i)); + } +} + /** * setup_machine_fdt - Machine setup when an dtb was passed to the kernel * @dt_phys: physical address of dt blob diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 34711757ba59..a6c301e90a3b 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -417,16 +417,6 @@ local_restart: ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing stmdb sp!, {r4, r5} @ push fifth and sixth args -#ifdef CONFIG_SECCOMP - tst r10, #_TIF_SECCOMP - beq 1f - mov r0, scno - bl __secure_computing - add r0, sp, #S_R0 + S_OFF @ pointer to regs - ldmia r0, {r0 - r3} @ have to reload r0 - r3 -1: -#endif - tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls? bne __sys_trace @@ -458,11 +448,13 @@ __sys_trace: ldmccia r1, {r0 - r6} @ have to reload r0 - r6 stmccia sp, {r4, r5} @ and update the stack args ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine - b 2b + cmp scno, #-1 @ skip the syscall? + bne 2b + add sp, sp, #S_OFF @ restore stack + b ret_slow_syscall __sys_trace_return: str r0, [sp, #S_R0 + S_OFF]! @ save returned r0 - mov r1, scno mov r0, sp bl syscall_trace_exit b ret_slow_syscall @@ -510,22 +502,6 @@ sys_syscall: b sys_ni_syscall ENDPROC(sys_syscall) -sys_fork_wrapper: - add r0, sp, #S_OFF - b sys_fork -ENDPROC(sys_fork_wrapper) - -sys_vfork_wrapper: - add r0, sp, #S_OFF - b sys_vfork -ENDPROC(sys_vfork_wrapper) - -sys_clone_wrapper: - add ip, sp, #S_OFF - str ip, [sp, #4] - b sys_clone -ENDPROC(sys_clone_wrapper) - sys_sigreturn_wrapper: add r0, sp, #S_OFF mov why, #0 @ prevent syscall restart handling diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 278cfc144f44..2c228a07e58c 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -68,7 +68,7 @@ __after_proc_init: * CP15 system control register value returned in r0 from * the CPU init function. */ -#ifdef CONFIG_ALIGNMENT_TRAP +#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 orr r0, r0, #CR_A #else bic r0, r0, #CR_A diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 281bf3301241..5ff2e77782b1 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -52,14 +52,14 @@ static u8 debug_arch; /* Maximum supported watchpoint length. */ static u8 max_watchpoint_len; -#define READ_WB_REG_CASE(OP2, M, VAL) \ - case ((OP2 << 4) + M): \ - ARM_DBG_READ(c ## M, OP2, VAL); \ +#define READ_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_READ(c0, c ## M, OP2, VAL); \ break -#define WRITE_WB_REG_CASE(OP2, M, VAL) \ - case ((OP2 << 4) + M): \ - ARM_DBG_WRITE(c ## M, OP2, VAL);\ +#define WRITE_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_WRITE(c0, c ## M, OP2, VAL); \ break #define GEN_READ_WB_REG_CASES(OP2, VAL) \ @@ -136,12 +136,12 @@ static u8 get_debug_arch(void) /* Do we implement the extended CPUID interface? */ if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); + pr_warn_once("CPUID feature registers not supported. " + "Assuming v6 debug is present.\n"); return ARM_DEBUG_ARCH_V6; } - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return (didr >> 16) & 0xf; } @@ -169,7 +169,7 @@ static int debug_exception_updates_fsr(void) static int get_num_wrp_resources(void) { u32 didr; - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return ((didr >> 28) & 0xf) + 1; } @@ -177,7 +177,7 @@ static int get_num_wrp_resources(void) static int get_num_brp_resources(void) { u32 didr; - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return ((didr >> 24) & 0xf) + 1; } @@ -228,19 +228,17 @@ static int get_num_brps(void) * be put into halting debug mode at any time by an external debugger * but there is nothing we can do to prevent that. */ -static int enable_monitor_mode(void) +static int monitor_mode_enabled(void) { u32 dscr; - int ret = 0; - - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); + return !!(dscr & ARM_DSCR_MDBGEN); +} - /* Ensure that halting mode is disabled. */ - if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, - "halting debug mode enabled. Unable to access hardware resources.\n")) { - ret = -EPERM; - goto out; - } +static int enable_monitor_mode(void) +{ + u32 dscr; + ARM_DBG_READ(c0, c1, 0, dscr); /* If monitor mode is already enabled, just return. */ if (dscr & ARM_DSCR_MDBGEN) @@ -250,24 +248,27 @@ static int enable_monitor_mode(void) switch (get_debug_arch()) { case ARM_DEBUG_ARCH_V6: case ARM_DEBUG_ARCH_V6_1: - ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); + ARM_DBG_WRITE(c0, c1, 0, (dscr | ARM_DSCR_MDBGEN)); break; case ARM_DEBUG_ARCH_V7_ECP14: case ARM_DEBUG_ARCH_V7_1: - ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN)); + ARM_DBG_WRITE(c0, c2, 2, (dscr | ARM_DSCR_MDBGEN)); + isb(); break; default: - ret = -ENODEV; - goto out; + return -ENODEV; } /* Check that the write made it through. */ - ARM_DBG_READ(c1, 0, dscr); - if (!(dscr & ARM_DSCR_MDBGEN)) - ret = -EPERM; + ARM_DBG_READ(c0, c1, 0, dscr); + if (!(dscr & ARM_DSCR_MDBGEN)) { + pr_warn_once("Failed to enable monitor mode on CPU %d.\n", + smp_processor_id()); + return -EPERM; + } out: - return ret; + return 0; } int hw_breakpoint_slots(int type) @@ -328,14 +329,9 @@ int arch_install_hw_breakpoint(struct perf_event *bp) { struct arch_hw_breakpoint *info = counter_arch_bp(bp); struct perf_event **slot, **slots; - int i, max_slots, ctrl_base, val_base, ret = 0; + int i, max_slots, ctrl_base, val_base; u32 addr, ctrl; - /* Ensure that we are in monitor mode and halting mode is disabled. */ - ret = enable_monitor_mode(); - if (ret) - goto out; - addr = info->address; ctrl = encode_ctrl_reg(info->ctrl) | 0x1; @@ -362,9 +358,9 @@ int arch_install_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) { - ret = -EBUSY; - goto out; + if (i == max_slots) { + pr_warning("Can't find any breakpoint slot\n"); + return -EBUSY; } /* Override the breakpoint data with the step data. */ @@ -383,9 +379,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp) /* Setup the control register. */ write_wb_reg(ctrl_base + i, ctrl); - -out: - return ret; + return 0; } void arch_uninstall_hw_breakpoint(struct perf_event *bp) @@ -416,8 +410,10 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) + if (i == max_slots) { + pr_warning("Can't find any breakpoint slot\n"); return; + } /* Ensure that we disable the mismatch breakpoint. */ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE && @@ -596,6 +592,10 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) int ret = 0; u32 offset, alignment_mask = 0x3; + /* Ensure that we are in monitor debug mode. */ + if (!monitor_mode_enabled()) + return -ENODEV; + /* Build the arch_hw_breakpoint. */ ret = arch_build_bp_info(bp); if (ret) @@ -858,7 +858,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, local_irq_enable(); /* We only handle watchpoints and hardware breakpoints. */ - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); /* Perform perf callbacks. */ switch (ARM_DSCR_MOE(dscr)) { @@ -906,7 +906,7 @@ static struct undef_hook debug_reg_hook = { static void reset_ctrl_regs(void *unused) { int i, raw_num_brps, err = 0, cpu = smp_processor_id(); - u32 dbg_power; + u32 val; /* * v7 debug contains save and restore registers so that debug state @@ -919,23 +919,30 @@ static void reset_ctrl_regs(void *unused) switch (debug_arch) { case ARM_DEBUG_ARCH_V6: case ARM_DEBUG_ARCH_V6_1: - /* ARMv6 cores just need to reset the registers. */ - goto reset_regs; + /* ARMv6 cores clear the registers out of reset. */ + goto out_mdbgen; case ARM_DEBUG_ARCH_V7_ECP14: /* * Ensure sticky power-down is clear (i.e. debug logic is * powered up). */ - asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power)); - if ((dbg_power & 0x1) == 0) + ARM_DBG_READ(c1, c5, 4, val); + if ((val & 0x1) == 0) err = -EPERM; + + /* + * Check whether we implement OS save and restore. + */ + ARM_DBG_READ(c1, c1, 4, val); + if ((val & 0x9) == 0) + goto clear_vcr; break; case ARM_DEBUG_ARCH_V7_1: /* * Ensure the OS double lock is clear. */ - asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power)); - if ((dbg_power & 0x1) == 1) + ARM_DBG_READ(c1, c3, 4, val); + if ((val & 0x1) == 1) err = -EPERM; break; } @@ -947,24 +954,29 @@ static void reset_ctrl_regs(void *unused) } /* - * Unconditionally clear the lock by writing a value + * Unconditionally clear the OS lock by writing a value * other than 0xC5ACCE55 to the access register. */ - asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); + ARM_DBG_WRITE(c1, c0, 4, 0); isb(); /* * Clear any configured vector-catch events before * enabling monitor mode. */ - asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); +clear_vcr: + ARM_DBG_WRITE(c0, c7, 0, 0); isb(); -reset_regs: - if (enable_monitor_mode()) + if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { + pr_warning("CPU %d failed to disable vector catch\n", cpu); return; + } - /* We must also reset any reserved registers. */ + /* + * The control/value register pairs are UNKNOWN out of reset so + * clear them to avoid spurious debug events. + */ raw_num_brps = get_num_brp_resources(); for (i = 0; i < raw_num_brps; ++i) { write_wb_reg(ARM_BASE_BCR + i, 0UL); @@ -975,6 +987,19 @@ reset_regs: write_wb_reg(ARM_BASE_WCR + i, 0UL); write_wb_reg(ARM_BASE_WVR + i, 0UL); } + + if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { + pr_warning("CPU %d failed to clear debug register pairs\n", cpu); + return; + } + + /* + * Have a crack at enabling monitor mode. We don't actually need + * it yet, but reporting an error early is useful if it fails. + */ +out_mdbgen: + if (enable_monitor_mode()) + cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); } static int __cpuinit dbg_reset_notify(struct notifier_block *self, @@ -992,8 +1017,6 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = { static int __init arch_hw_breakpoint_init(void) { - u32 dscr; - debug_arch = get_debug_arch(); if (!debug_arch_supported()) { @@ -1028,17 +1051,10 @@ static int __init arch_hw_breakpoint_init(void) core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " : "", core_num_wrps); - ARM_DBG_READ(c1, 0, dscr); - if (dscr & ARM_DSCR_HDBGEN) { - max_watchpoint_len = 4; - pr_warning("halting debug mode enabled. Assuming maximum watchpoint size of %u bytes.\n", - max_watchpoint_len); - } else { - /* Work out the maximum supported watchpoint length. */ - max_watchpoint_len = get_max_wp_len(); - pr_info("maximum watchpoint size is %u bytes.\n", - max_watchpoint_len); - } + /* Work out the maximum supported watchpoint length. */ + max_watchpoint_len = get_max_wp_len(); + pr_info("maximum watchpoint size is %u bytes.\n", + max_watchpoint_len); /* Register debug fault handler. */ hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP, diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 53c0304b734a..f9e8657dd241 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -86,12 +86,10 @@ armpmu_map_event(struct perf_event *event, return -ENOENT; } -int -armpmu_event_set_period(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) +int armpmu_event_set_period(struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; s64 left = local64_read(&hwc->period_left); s64 period = hwc->sample_period; int ret = 0; @@ -119,24 +117,22 @@ armpmu_event_set_period(struct perf_event *event, local64_set(&hwc->prev_count, (u64)-left); - armpmu->write_counter(idx, (u64)(-left) & 0xffffffff); + armpmu->write_counter(event, (u64)(-left) & 0xffffffff); perf_event_update_userpage(event); return ret; } -u64 -armpmu_event_update(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) +u64 armpmu_event_update(struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; u64 delta, prev_raw_count, new_raw_count; again: prev_raw_count = local64_read(&hwc->prev_count); - new_raw_count = armpmu->read_counter(idx); + new_raw_count = armpmu->read_counter(event); if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, new_raw_count) != prev_raw_count) @@ -159,7 +155,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx); + armpmu_event_update(event); } static void @@ -173,14 +169,13 @@ armpmu_stop(struct perf_event *event, int flags) * PERF_EF_UPDATE, see comments in armpmu_start(). */ if (!(hwc->state & PERF_HES_STOPPED)) { - armpmu->disable(hwc, hwc->idx); - armpmu_event_update(event, hwc, hwc->idx); + armpmu->disable(event); + armpmu_event_update(event); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } -static void -armpmu_start(struct perf_event *event, int flags) +static void armpmu_start(struct perf_event *event, int flags) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; @@ -200,8 +195,8 @@ armpmu_start(struct perf_event *event, int flags) * get an interrupt too soon or *way* too late if the overflow has * happened since disabling. */ - armpmu_event_set_period(event, hwc, hwc->idx); - armpmu->enable(hwc, hwc->idx); + armpmu_event_set_period(event); + armpmu->enable(event); } static void @@ -233,7 +228,7 @@ armpmu_add(struct perf_event *event, int flags) perf_pmu_disable(event->pmu); /* If we don't have a space for the counter then finish early. */ - idx = armpmu->get_event_idx(hw_events, hwc); + idx = armpmu->get_event_idx(hw_events, event); if (idx < 0) { err = idx; goto out; @@ -244,7 +239,7 @@ armpmu_add(struct perf_event *event, int flags) * sure it is disabled. */ event->hw.idx = idx; - armpmu->disable(hwc, idx); + armpmu->disable(event); hw_events->events[idx] = event; hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; @@ -264,13 +259,12 @@ validate_event(struct pmu_hw_events *hw_events, struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct hw_perf_event fake_event = event->hw; struct pmu *leader_pmu = event->group_leader->pmu; if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF) return 1; - return armpmu->get_event_idx(hw_events, &fake_event) >= 0; + return armpmu->get_event_idx(hw_events, event) >= 0; } static int @@ -316,7 +310,7 @@ static irqreturn_t armpmu_dispatch_irq(int irq, void *dev) static void armpmu_release_hardware(struct arm_pmu *armpmu) { - armpmu->free_irq(); + armpmu->free_irq(armpmu); pm_runtime_put_sync(&armpmu->plat_device->dev); } @@ -330,7 +324,7 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu) return -ENODEV; pm_runtime_get_sync(&pmu_device->dev); - err = armpmu->request_irq(armpmu_dispatch_irq); + err = armpmu->request_irq(armpmu, armpmu_dispatch_irq); if (err) { armpmu_release_hardware(armpmu); return err; @@ -465,13 +459,13 @@ static void armpmu_enable(struct pmu *pmu) int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events); if (enabled) - armpmu->start(); + armpmu->start(armpmu); } static void armpmu_disable(struct pmu *pmu) { struct arm_pmu *armpmu = to_arm_pmu(pmu); - armpmu->stop(); + armpmu->stop(armpmu); } #ifdef CONFIG_PM_RUNTIME @@ -517,12 +511,13 @@ static void __init armpmu_init(struct arm_pmu *armpmu) }; } -int armpmu_register(struct arm_pmu *armpmu, char *name, int type) +int armpmu_register(struct arm_pmu *armpmu, int type) { armpmu_init(armpmu); + pm_runtime_enable(&armpmu->plat_device->dev); pr_info("enabled with %s PMU driver, %d counters available\n", armpmu->name, armpmu->num_events); - return perf_pmu_register(&armpmu->pmu, name, type); + return perf_pmu_register(&armpmu->pmu, armpmu->name, type); } /* @@ -576,6 +571,10 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { struct frame_tail __user *tail; + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + /* We don't support guest os callchain now */ + return; + } tail = (struct frame_tail __user *)regs->ARM_fp - 1; @@ -603,9 +602,41 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) { struct stackframe fr; + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + /* We don't support guest os callchain now */ + return; + } + fr.fp = regs->ARM_fp; fr.sp = regs->ARM_sp; fr.lr = regs->ARM_lr; fr.pc = regs->ARM_pc; walk_stackframe(&fr, callchain_trace, entry); } + +unsigned long perf_instruction_pointer(struct pt_regs *regs) +{ + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) + return perf_guest_cbs->get_guest_ip(); + + return instruction_pointer(regs); +} + +unsigned long perf_misc_flags(struct pt_regs *regs) +{ + int misc = 0; + + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + if (perf_guest_cbs->is_user_mode()) + misc |= PERF_RECORD_MISC_GUEST_USER; + else + misc |= PERF_RECORD_MISC_GUEST_KERNEL; + } else { + if (user_mode(regs)) + misc |= PERF_RECORD_MISC_USER; + else + misc |= PERF_RECORD_MISC_KERNEL; + } + + return misc; +} diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 8d7d8d4de9d6..9a4f6307a016 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <asm/cputype.h> @@ -45,7 +46,7 @@ const char *perf_pmu_name(void) if (!cpu_pmu) return NULL; - return cpu_pmu->pmu.name; + return cpu_pmu->name; } EXPORT_SYMBOL_GPL(perf_pmu_name); @@ -70,7 +71,7 @@ static struct pmu_hw_events *cpu_pmu_get_cpu_events(void) return &__get_cpu_var(cpu_hw_events); } -static void cpu_pmu_free_irq(void) +static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) { int i, irq, irqs; struct platform_device *pmu_device = cpu_pmu->plat_device; @@ -86,7 +87,7 @@ static void cpu_pmu_free_irq(void) } } -static int cpu_pmu_request_irq(irq_handler_t handler) +static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) { int i, err, irq, irqs; struct platform_device *pmu_device = cpu_pmu->plat_device; @@ -147,7 +148,7 @@ static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu) /* Ensure the PMU has sane values out of reset. */ if (cpu_pmu && cpu_pmu->reset) - on_each_cpu(cpu_pmu->reset, NULL, 1); + on_each_cpu(cpu_pmu->reset, cpu_pmu, 1); } /* @@ -163,7 +164,9 @@ static int __cpuinit cpu_pmu_notify(struct notifier_block *b, return NOTIFY_DONE; if (cpu_pmu && cpu_pmu->reset) - cpu_pmu->reset(NULL); + cpu_pmu->reset(cpu_pmu); + else + return NOTIFY_DONE; return NOTIFY_OK; } @@ -195,13 +198,13 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = { /* * CPU PMU identification and probing. */ -static struct arm_pmu *__devinit probe_current_pmu(void) +static int __devinit probe_current_pmu(struct arm_pmu *pmu) { - struct arm_pmu *pmu = NULL; int cpu = get_cpu(); unsigned long cpuid = read_cpuid_id(); unsigned long implementor = (cpuid & 0xFF000000) >> 24; unsigned long part_number = (cpuid & 0xFFF0); + int ret = -ENODEV; pr_info("probing PMU on CPU %d\n", cpu); @@ -211,25 +214,25 @@ static struct arm_pmu *__devinit probe_current_pmu(void) case 0xB360: /* ARM1136 */ case 0xB560: /* ARM1156 */ case 0xB760: /* ARM1176 */ - pmu = armv6pmu_init(); + ret = armv6pmu_init(pmu); break; case 0xB020: /* ARM11mpcore */ - pmu = armv6mpcore_pmu_init(); + ret = armv6mpcore_pmu_init(pmu); break; case 0xC080: /* Cortex-A8 */ - pmu = armv7_a8_pmu_init(); + ret = armv7_a8_pmu_init(pmu); break; case 0xC090: /* Cortex-A9 */ - pmu = armv7_a9_pmu_init(); + ret = armv7_a9_pmu_init(pmu); break; case 0xC050: /* Cortex-A5 */ - pmu = armv7_a5_pmu_init(); + ret = armv7_a5_pmu_init(pmu); break; case 0xC0F0: /* Cortex-A15 */ - pmu = armv7_a15_pmu_init(); + ret = armv7_a15_pmu_init(pmu); break; case 0xC070: /* Cortex-A7 */ - pmu = armv7_a7_pmu_init(); + ret = armv7_a7_pmu_init(pmu); break; } /* Intel CPUs [xscale]. */ @@ -237,43 +240,54 @@ static struct arm_pmu *__devinit probe_current_pmu(void) part_number = (cpuid >> 13) & 0x7; switch (part_number) { case 1: - pmu = xscale1pmu_init(); + ret = xscale1pmu_init(pmu); break; case 2: - pmu = xscale2pmu_init(); + ret = xscale2pmu_init(pmu); break; } } put_cpu(); - return pmu; + return ret; } static int __devinit cpu_pmu_device_probe(struct platform_device *pdev) { const struct of_device_id *of_id; - struct arm_pmu *(*init_fn)(void); + int (*init_fn)(struct arm_pmu *); struct device_node *node = pdev->dev.of_node; + struct arm_pmu *pmu; + int ret = -ENODEV; if (cpu_pmu) { pr_info("attempt to register multiple PMU devices!"); return -ENOSPC; } + pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL); + if (!pmu) { + pr_info("failed to allocate PMU device!"); + return -ENOMEM; + } + if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) { init_fn = of_id->data; - cpu_pmu = init_fn(); + ret = init_fn(pmu); } else { - cpu_pmu = probe_current_pmu(); + ret = probe_current_pmu(pmu); } - if (!cpu_pmu) - return -ENODEV; + if (ret) { + pr_info("failed to register PMU devices!"); + kfree(pmu); + return ret; + } + cpu_pmu = pmu; cpu_pmu->plat_device = pdev; cpu_pmu_init(cpu_pmu); - register_cpu_notifier(&cpu_pmu_hotplug_notifier); - armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); + armpmu_register(cpu_pmu, PERF_TYPE_RAW); return 0; } @@ -290,6 +304,16 @@ static struct platform_driver cpu_pmu_driver = { static int __init register_pmu_driver(void) { - return platform_driver_register(&cpu_pmu_driver); + int err; + + err = register_cpu_notifier(&cpu_pmu_hotplug_notifier); + if (err) + return err; + + err = platform_driver_register(&cpu_pmu_driver); + if (err) + unregister_cpu_notifier(&cpu_pmu_hotplug_notifier); + + return err; } device_initcall(register_pmu_driver); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 6ccc07971745..f3e22ff8b6a2 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -401,9 +401,10 @@ armv6_pmcr_counter_has_overflowed(unsigned long pmcr, return ret; } -static inline u32 -armv6pmu_read_counter(int counter) +static inline u32 armv6pmu_read_counter(struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; unsigned long value = 0; if (ARMV6_CYCLE_COUNTER == counter) @@ -418,10 +419,11 @@ armv6pmu_read_counter(int counter) return value; } -static inline void -armv6pmu_write_counter(int counter, - u32 value) +static inline void armv6pmu_write_counter(struct perf_event *event, u32 value) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; + if (ARMV6_CYCLE_COUNTER == counter) asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); else if (ARMV6_COUNTER0 == counter) @@ -432,12 +434,13 @@ armv6pmu_write_counter(int counter, WARN_ONCE(1, "invalid counter number (%d)\n", counter); } -static void -armv6pmu_enable_event(struct hw_perf_event *hwc, - int idx) +static void armv6pmu_enable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; if (ARMV6_CYCLE_COUNTER == idx) { mask = 0; @@ -473,7 +476,8 @@ armv6pmu_handle_irq(int irq_num, { unsigned long pmcr = armv6_pmcr_read(); struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -489,7 +493,6 @@ armv6pmu_handle_irq(int irq_num, */ armv6_pmcr_write(pmcr); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -506,13 +509,13 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } /* @@ -527,8 +530,7 @@ armv6pmu_handle_irq(int irq_num, return IRQ_HANDLED; } -static void -armv6pmu_start(void) +static void armv6pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -540,8 +542,7 @@ armv6pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -armv6pmu_stop(void) +static void armv6pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -555,10 +556,11 @@ armv6pmu_stop(void) static int armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; /* Always place a cycle counter into the cycle counter. */ - if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { + if (ARMV6_PERFCTR_CPU_CYCLES == hwc->config_base) { if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) return -EAGAIN; @@ -579,12 +581,13 @@ armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, } } -static void -armv6pmu_disable_event(struct hw_perf_event *hwc, - int idx) +static void armv6pmu_disable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -613,12 +616,13 @@ armv6pmu_disable_event(struct hw_perf_event *hwc, raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, - int idx) +static void armv6mpcore_pmu_disable_event(struct perf_event *event) { unsigned long val, mask, flags, evt = 0; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -649,24 +653,22 @@ static int armv6_map_event(struct perf_event *event) &armv6_perf_cache_map, 0xFF); } -static struct arm_pmu armv6pmu = { - .name = "v6", - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6pmu_disable_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .map_event = armv6_map_event, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit armv6pmu_init(void) +static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu) { - return &armv6pmu; + cpu_pmu->name = "v6"; + cpu_pmu->handle_irq = armv6pmu_handle_irq; + cpu_pmu->enable = armv6pmu_enable_event; + cpu_pmu->disable = armv6pmu_disable_event; + cpu_pmu->read_counter = armv6pmu_read_counter; + cpu_pmu->write_counter = armv6pmu_write_counter; + cpu_pmu->get_event_idx = armv6pmu_get_event_idx; + cpu_pmu->start = armv6pmu_start; + cpu_pmu->stop = armv6pmu_stop; + cpu_pmu->map_event = armv6_map_event; + cpu_pmu->num_events = 3; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } /* @@ -683,33 +685,31 @@ static int armv6mpcore_map_event(struct perf_event *event) &armv6mpcore_perf_cache_map, 0xFF); } -static struct arm_pmu armv6mpcore_pmu = { - .name = "v6mpcore", - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6mpcore_pmu_disable_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .map_event = armv6mpcore_map_event, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) +static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) { - return &armv6mpcore_pmu; + cpu_pmu->name = "v6mpcore"; + cpu_pmu->handle_irq = armv6pmu_handle_irq; + cpu_pmu->enable = armv6pmu_enable_event; + cpu_pmu->disable = armv6mpcore_pmu_disable_event; + cpu_pmu->read_counter = armv6pmu_read_counter; + cpu_pmu->write_counter = armv6pmu_write_counter; + cpu_pmu->get_event_idx = armv6pmu_get_event_idx; + cpu_pmu->start = armv6pmu_start; + cpu_pmu->stop = armv6pmu_stop; + cpu_pmu->map_event = armv6mpcore_map_event; + cpu_pmu->num_events = 3; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } #else -static struct arm_pmu *__devinit armv6pmu_init(void) +static int armv6pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) +static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } #endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index bd4b090ebcfd..7d0cce85d17e 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -18,8 +18,6 @@ #ifdef CONFIG_CPU_V7 -static struct arm_pmu armv7pmu; - /* * Common ARMv7 event types * @@ -738,7 +736,8 @@ static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] */ #define ARMV7_IDX_CYCLE_COUNTER 0 #define ARMV7_IDX_COUNTER0 1 -#define ARMV7_IDX_COUNTER_LAST (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1) +#define ARMV7_IDX_COUNTER_LAST(cpu_pmu) \ + (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1) #define ARMV7_MAX_COUNTERS 32 #define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1) @@ -804,49 +803,34 @@ static inline int armv7_pmnc_has_overflowed(u32 pmnc) return pmnc & ARMV7_OVERFLOWED_MASK; } -static inline int armv7_pmnc_counter_valid(int idx) +static inline int armv7_pmnc_counter_valid(struct arm_pmu *cpu_pmu, int idx) { - return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST; + return idx >= ARMV7_IDX_CYCLE_COUNTER && + idx <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); } static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx) { - int ret = 0; - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u checking wrong counter %d overflow status\n", - smp_processor_id(), idx); - } else { - counter = ARMV7_IDX_TO_COUNTER(idx); - ret = pmnc & BIT(counter); - } - - return ret; + return pmnc & BIT(ARMV7_IDX_TO_COUNTER(idx)); } static inline int armv7_pmnc_select_counter(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u selecting wrong PMNC counter %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter)); isb(); return idx; } -static inline u32 armv7pmu_read_counter(int idx) +static inline u32 armv7pmu_read_counter(struct perf_event *event) { + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; u32 value = 0; - if (!armv7_pmnc_counter_valid(idx)) + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) pr_err("CPU%u reading wrong counter %d\n", smp_processor_id(), idx); else if (idx == ARMV7_IDX_CYCLE_COUNTER) @@ -857,9 +841,13 @@ static inline u32 armv7pmu_read_counter(int idx) return value; } -static inline void armv7pmu_write_counter(int idx, u32 value) +static inline void armv7pmu_write_counter(struct perf_event *event, u32 value) { - if (!armv7_pmnc_counter_valid(idx)) + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) pr_err("CPU%u writing wrong counter %d\n", smp_processor_id(), idx); else if (idx == ARMV7_IDX_CYCLE_COUNTER) @@ -878,60 +866,28 @@ static inline void armv7_pmnc_write_evtsel(int idx, u32 val) static inline int armv7_pmnc_enable_counter(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u enabling wrong PMNC counter %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter))); return idx; } static inline int armv7_pmnc_disable_counter(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u disabling wrong PMNC counter %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter))); return idx; } static inline int armv7_pmnc_enable_intens(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter))); return idx; } static inline int armv7_pmnc_disable_intens(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); isb(); /* Clear the overflow flag in case an interrupt is pending. */ @@ -956,7 +912,7 @@ static inline u32 armv7_pmnc_getreset_flags(void) } #ifdef DEBUG -static void armv7_pmnc_dump_regs(void) +static void armv7_pmnc_dump_regs(struct arm_pmu *cpu_pmu) { u32 val; unsigned int cnt; @@ -981,7 +937,8 @@ static void armv7_pmnc_dump_regs(void) asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); printk(KERN_INFO "CCNT =0x%08x\n", val); - for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) { + for (cnt = ARMV7_IDX_COUNTER0; + cnt <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); cnt++) { armv7_pmnc_select_counter(cnt); asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); printk(KERN_INFO "CNT[%d] count =0x%08x\n", @@ -993,10 +950,19 @@ static void armv7_pmnc_dump_regs(void) } #endif -static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void armv7pmu_enable_event(struct perf_event *event) { unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; + + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { + pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return; + } /* * Enable counter and interrupt, and set the counter to count @@ -1014,7 +980,7 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) * We only need to set the event for the cycle counter if we * have the ability to perform event filtering. */ - if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER) + if (cpu_pmu->set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER) armv7_pmnc_write_evtsel(idx, hwc->config_base); /* @@ -1030,10 +996,19 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) +static void armv7pmu_disable_event(struct perf_event *event) { unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; + + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { + pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return; + } /* * Disable counter and interrupt @@ -1057,7 +1032,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) { u32 pmnc; struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -1077,7 +1053,6 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) */ regs = get_irq_regs(); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -1094,13 +1069,13 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } /* @@ -1115,7 +1090,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) return IRQ_HANDLED; } -static void armv7pmu_start(void) +static void armv7pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -1126,7 +1101,7 @@ static void armv7pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void armv7pmu_stop(void) +static void armv7pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -1138,10 +1113,12 @@ static void armv7pmu_stop(void) } static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { int idx; - unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + unsigned long evtype = hwc->config_base & ARMV7_EVTYPE_EVENT; /* Always place a cycle counter into the cycle counter. */ if (evtype == ARMV7_PERFCTR_CPU_CYCLES) { @@ -1192,11 +1169,14 @@ static int armv7pmu_set_event_filter(struct hw_perf_event *event, static void armv7pmu_reset(void *info) { + struct arm_pmu *cpu_pmu = (struct arm_pmu *)info; u32 idx, nb_cnt = cpu_pmu->num_events; /* The counter and interrupt enable registers are unknown at reset. */ - for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) - armv7pmu_disable_event(NULL, idx); + for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { + armv7_pmnc_disable_counter(idx); + armv7_pmnc_disable_intens(idx); + } /* Initialize & Reset PMNC: C and P bits */ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); @@ -1232,17 +1212,18 @@ static int armv7_a7_map_event(struct perf_event *event) &armv7_a7_perf_cache_map, 0xFF); } -static struct arm_pmu armv7pmu = { - .handle_irq = armv7pmu_handle_irq, - .enable = armv7pmu_enable_event, - .disable = armv7pmu_disable_event, - .read_counter = armv7pmu_read_counter, - .write_counter = armv7pmu_write_counter, - .get_event_idx = armv7pmu_get_event_idx, - .start = armv7pmu_start, - .stop = armv7pmu_stop, - .reset = armv7pmu_reset, - .max_period = (1LLU << 32) - 1, +static void armv7pmu_init(struct arm_pmu *cpu_pmu) +{ + cpu_pmu->handle_irq = armv7pmu_handle_irq; + cpu_pmu->enable = armv7pmu_enable_event; + cpu_pmu->disable = armv7pmu_disable_event; + cpu_pmu->read_counter = armv7pmu_read_counter; + cpu_pmu->write_counter = armv7pmu_write_counter; + cpu_pmu->get_event_idx = armv7pmu_get_event_idx; + cpu_pmu->start = armv7pmu_start; + cpu_pmu->stop = armv7pmu_stop; + cpu_pmu->reset = armv7pmu_reset; + cpu_pmu->max_period = (1LLU << 32) - 1; }; static u32 __devinit armv7_read_num_pmnc_events(void) @@ -1256,70 +1237,75 @@ static u32 __devinit armv7_read_num_pmnc_events(void) return nb_cnt + 1; } -static struct arm_pmu *__devinit armv7_a8_pmu_init(void) +static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A8"; - armv7pmu.map_event = armv7_a8_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A8"; + cpu_pmu->map_event = armv7_a8_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + return 0; } -static struct arm_pmu *__devinit armv7_a9_pmu_init(void) +static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A9"; - armv7pmu.map_event = armv7_a9_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A9"; + cpu_pmu->map_event = armv7_a9_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + return 0; } -static struct arm_pmu *__devinit armv7_a5_pmu_init(void) +static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A5"; - armv7pmu.map_event = armv7_a5_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A5"; + cpu_pmu->map_event = armv7_a5_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + return 0; } -static struct arm_pmu *__devinit armv7_a15_pmu_init(void) +static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A15"; - armv7pmu.map_event = armv7_a15_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - armv7pmu.set_event_filter = armv7pmu_set_event_filter; - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A15"; + cpu_pmu->map_event = armv7_a15_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->set_event_filter = armv7pmu_set_event_filter; + return 0; } -static struct arm_pmu *__devinit armv7_a7_pmu_init(void) +static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A7"; - armv7pmu.map_event = armv7_a7_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - armv7pmu.set_event_filter = armv7pmu_set_event_filter; - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A7"; + cpu_pmu->map_event = armv7_a7_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->set_event_filter = armv7pmu_set_event_filter; + return 0; } #else -static struct arm_pmu *__devinit armv7_a8_pmu_init(void) +static inline int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a9_pmu_init(void) +static inline int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a5_pmu_init(void) +static inline int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a15_pmu_init(void) +static inline int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a7_pmu_init(void) +static inline int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } #endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 426e19f380a2..0c8265e53d5f 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -224,7 +224,8 @@ xscale1pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc; struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -248,7 +249,6 @@ xscale1pmu_handle_irq(int irq_num, void *dev) regs = get_irq_regs(); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -260,13 +260,13 @@ xscale1pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } irq_work_run(); @@ -280,11 +280,13 @@ xscale1pmu_handle_irq(int irq_num, void *dev) return IRQ_HANDLED; } -static void -xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void xscale1pmu_enable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -314,11 +316,13 @@ xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) +static void xscale1pmu_disable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -348,9 +352,10 @@ xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) static int xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { - if (XSCALE_PERFCTR_CCNT == event->config_base) { + struct hw_perf_event *hwc = &event->hw; + if (XSCALE_PERFCTR_CCNT == hwc->config_base) { if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) return -EAGAIN; @@ -366,8 +371,7 @@ xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc, } } -static void -xscale1pmu_start(void) +static void xscale1pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -379,8 +383,7 @@ xscale1pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale1pmu_stop(void) +static void xscale1pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -392,9 +395,10 @@ xscale1pmu_stop(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static inline u32 -xscale1pmu_read_counter(int counter) +static inline u32 xscale1pmu_read_counter(struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; u32 val = 0; switch (counter) { @@ -412,9 +416,11 @@ xscale1pmu_read_counter(int counter) return val; } -static inline void -xscale1pmu_write_counter(int counter, u32 val) +static inline void xscale1pmu_write_counter(struct perf_event *event, u32 val) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; + switch (counter) { case XSCALE_CYCLE_COUNTER: asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); @@ -434,24 +440,22 @@ static int xscale_map_event(struct perf_event *event) &xscale_perf_cache_map, 0xFF); } -static struct arm_pmu xscale1pmu = { - .name = "xscale1", - .handle_irq = xscale1pmu_handle_irq, - .enable = xscale1pmu_enable_event, - .disable = xscale1pmu_disable_event, - .read_counter = xscale1pmu_read_counter, - .write_counter = xscale1pmu_write_counter, - .get_event_idx = xscale1pmu_get_event_idx, - .start = xscale1pmu_start, - .stop = xscale1pmu_stop, - .map_event = xscale_map_event, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit xscale1pmu_init(void) +static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu) { - return &xscale1pmu; + cpu_pmu->name = "xscale1"; + cpu_pmu->handle_irq = xscale1pmu_handle_irq; + cpu_pmu->enable = xscale1pmu_enable_event; + cpu_pmu->disable = xscale1pmu_disable_event; + cpu_pmu->read_counter = xscale1pmu_read_counter; + cpu_pmu->write_counter = xscale1pmu_write_counter; + cpu_pmu->get_event_idx = xscale1pmu_get_event_idx; + cpu_pmu->start = xscale1pmu_start; + cpu_pmu->stop = xscale1pmu_stop; + cpu_pmu->map_event = xscale_map_event; + cpu_pmu->num_events = 3; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } #define XSCALE2_OVERFLOWED_MASK 0x01f @@ -567,7 +571,8 @@ xscale2pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc, of_flags; struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -585,7 +590,6 @@ xscale2pmu_handle_irq(int irq_num, void *dev) regs = get_irq_regs(); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -597,13 +601,13 @@ xscale2pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } irq_work_run(); @@ -617,11 +621,13 @@ xscale2pmu_handle_irq(int irq_num, void *dev) return IRQ_HANDLED; } -static void -xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void xscale2pmu_enable_event(struct perf_event *event) { unsigned long flags, ien, evtsel; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -661,11 +667,13 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) +static void xscale2pmu_disable_event(struct perf_event *event) { unsigned long flags, ien, evtsel, of_flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -713,7 +721,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) static int xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { int idx = xscale1pmu_get_event_idx(cpuc, event); if (idx >= 0) @@ -727,8 +735,7 @@ out: return idx; } -static void -xscale2pmu_start(void) +static void xscale2pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -740,8 +747,7 @@ xscale2pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale2pmu_stop(void) +static void xscale2pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -753,9 +759,10 @@ xscale2pmu_stop(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static inline u32 -xscale2pmu_read_counter(int counter) +static inline u32 xscale2pmu_read_counter(struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; u32 val = 0; switch (counter) { @@ -779,9 +786,11 @@ xscale2pmu_read_counter(int counter) return val; } -static inline void -xscale2pmu_write_counter(int counter, u32 val) +static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; + switch (counter) { case XSCALE_CYCLE_COUNTER: asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); @@ -801,33 +810,31 @@ xscale2pmu_write_counter(int counter, u32 val) } } -static struct arm_pmu xscale2pmu = { - .name = "xscale2", - .handle_irq = xscale2pmu_handle_irq, - .enable = xscale2pmu_enable_event, - .disable = xscale2pmu_disable_event, - .read_counter = xscale2pmu_read_counter, - .write_counter = xscale2pmu_write_counter, - .get_event_idx = xscale2pmu_get_event_idx, - .start = xscale2pmu_start, - .stop = xscale2pmu_stop, - .map_event = xscale_map_event, - .num_events = 5, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit xscale2pmu_init(void) +static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu) { - return &xscale2pmu; + cpu_pmu->name = "xscale2"; + cpu_pmu->handle_irq = xscale2pmu_handle_irq; + cpu_pmu->enable = xscale2pmu_enable_event; + cpu_pmu->disable = xscale2pmu_disable_event; + cpu_pmu->read_counter = xscale2pmu_read_counter; + cpu_pmu->write_counter = xscale2pmu_write_counter; + cpu_pmu->get_event_idx = xscale2pmu_get_event_idx; + cpu_pmu->start = xscale2pmu_start; + cpu_pmu->stop = xscale2pmu_stop; + cpu_pmu->map_event = xscale_map_event; + cpu_pmu->num_events = 5; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } #else -static struct arm_pmu *__devinit xscale1pmu_init(void) +static inline int xscale1pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit xscale2pmu_init(void) +static inline int xscale2pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } #endif /* CONFIG_CPU_XSCALE */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 90084a6de35a..c6dec5fc20aa 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -34,6 +34,7 @@ #include <linux/leds.h> #include <asm/cacheflush.h> +#include <asm/idmap.h> #include <asm/processor.h> #include <asm/thread_notify.h> #include <asm/stacktrace.h> @@ -56,8 +57,6 @@ static const char *isa_modes[] = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -extern void setup_mm_for_reboot(void); - static volatile int hlt_counter; void disable_hlt(void) @@ -70,6 +69,7 @@ EXPORT_SYMBOL(disable_hlt); void enable_hlt(void) { hlt_counter--; + BUG_ON(hlt_counter < 0); } EXPORT_SYMBOL(enable_hlt); @@ -376,17 +376,18 @@ asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); int copy_thread(unsigned long clone_flags, unsigned long stack_start, - unsigned long stk_sz, struct task_struct *p, struct pt_regs *regs) + unsigned long stk_sz, struct task_struct *p) { struct thread_info *thread = task_thread_info(p); struct pt_regs *childregs = task_pt_regs(p); memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save)); - if (likely(regs)) { - *childregs = *regs; + if (likely(!(p->flags & PF_KTHREAD))) { + *childregs = *current_pt_regs(); childregs->ARM_r0 = 0; - childregs->ARM_sp = stack_start; + if (stack_start) + childregs->ARM_sp = stack_start; } else { memset(childregs, 0, sizeof(struct pt_regs)); thread->cpu_context.r4 = stk_sz; @@ -399,7 +400,7 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, clear_ptrace_hw_breakpoint(p); if (clone_flags & CLONE_SETTLS) - thread->tp_value = regs->ARM_r3; + thread->tp_value = childregs->ARM_r3; thread_notify(THREAD_NOTIFY_COPY, thread); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 739db3a1b2d2..03deeffd9f6d 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -916,16 +916,11 @@ enum ptrace_syscall_dir { PTRACE_SYSCALL_EXIT, }; -static int ptrace_syscall_trace(struct pt_regs *regs, int scno, - enum ptrace_syscall_dir dir) +static int tracehook_report_syscall(struct pt_regs *regs, + enum ptrace_syscall_dir dir) { unsigned long ip; - current_thread_info()->syscall = scno; - - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return scno; - /* * IP is used to denote syscall entry/exit: * IP = 0 -> entry, =1 -> exit @@ -944,19 +939,41 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno, asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) { - scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + current_thread_info()->syscall = scno; + + /* Do the secure computing check first; failures should be fast. */ + if (secure_computing(scno) == -1) + return -1; + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + scno = tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, scno); + audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); + return scno; } -asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno) +asmlinkage void syscall_trace_exit(struct pt_regs *regs) { - scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); - if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) - trace_sys_exit(regs, scno); + /* + * Audit the syscall before anything else, as a debugger may + * come in and change the current registers. + */ audit_syscall_exit(regs); - return scno; + + /* + * Note that we haven't updated the ->syscall field for the + * current thread. This isn't a problem because it will have + * been set on syscall entry and there hasn't been an opportunity + * for a PTRACE_SET_SYSCALL since then. + */ + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_exit(regs, regs_return_value(regs)); + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index da1d1aa20ad9..9a89bf4aefe1 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -383,6 +383,12 @@ void cpu_init(void) BUG(); } + /* + * This only works on resume and secondary cores. For booting on the + * boot cpu, smp_prepare_boot_cpu is called after percpu area setup. + */ + set_my_cpu_offset(per_cpu_offset(cpu)); + cpu_proc_init(); /* @@ -426,13 +432,14 @@ int __cpu_logical_map[NR_CPUS]; void __init smp_setup_processor_id(void) { int i; - u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0; + u32 cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cpu_logical_map(0) = cpu; - for (i = 1; i < NR_CPUS; ++i) + for (i = 1; i < nr_cpu_ids; ++i) cpu_logical_map(i) = i == cpu ? 0 : i; - printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); + printk(KERN_INFO "Booting Linux on physical CPU 0x%x\n", mpidr); } static void __init setup_processor(void) @@ -758,6 +765,7 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); + arm_dt_init_cpu_maps(); #ifdef CONFIG_SMP if (is_smp()) { smp_set_ops(mdesc->smp); @@ -841,12 +849,9 @@ static const char *hwcap_str[] = { static int c_show(struct seq_file *m, void *v) { - int i; + int i, j; + u32 cpuid; - seq_printf(m, "Processor\t: %s rev %d (%s)\n", - cpu_name, read_cpuid_id() & 15, elf_platform); - -#if defined(CONFIG_SMP) for_each_online_cpu(i) { /* * glibc reads /proc/cpuinfo to determine the number of @@ -854,45 +859,48 @@ static int c_show(struct seq_file *m, void *v) * "processor". Give glibc what it expects. */ seq_printf(m, "processor\t: %d\n", i); - seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n", + cpuid = is_smp() ? per_cpu(cpu_data, i).cpuid : read_cpuid_id(); + seq_printf(m, "model name\t: %s rev %d (%s)\n", + cpu_name, cpuid & 15, elf_platform); + +#if defined(CONFIG_SMP) + seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ), (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100); - } -#else /* CONFIG_SMP */ - seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", - loops_per_jiffy / (500000/HZ), - (loops_per_jiffy / (5000/HZ)) % 100); +#else + seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", + loops_per_jiffy / (500000/HZ), + (loops_per_jiffy / (5000/HZ)) % 100); #endif + /* dump out the processor features */ + seq_puts(m, "Features\t: "); - /* dump out the processor features */ - seq_puts(m, "Features\t: "); - - for (i = 0; hwcap_str[i]; i++) - if (elf_hwcap & (1 << i)) - seq_printf(m, "%s ", hwcap_str[i]); + for (j = 0; hwcap_str[j]; j++) + if (elf_hwcap & (1 << j)) + seq_printf(m, "%s ", hwcap_str[j]); - seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24); - seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]); + seq_printf(m, "\nCPU implementer\t: 0x%02x\n", cpuid >> 24); + seq_printf(m, "CPU architecture: %s\n", + proc_arch[cpu_architecture()]); - if ((read_cpuid_id() & 0x0008f000) == 0x00000000) { - /* pre-ARM7 */ - seq_printf(m, "CPU part\t: %07x\n", read_cpuid_id() >> 4); - } else { - if ((read_cpuid_id() & 0x0008f000) == 0x00007000) { - /* ARM7 */ - seq_printf(m, "CPU variant\t: 0x%02x\n", - (read_cpuid_id() >> 16) & 127); + if ((cpuid & 0x0008f000) == 0x00000000) { + /* pre-ARM7 */ + seq_printf(m, "CPU part\t: %07x\n", cpuid >> 4); } else { - /* post-ARM7 */ - seq_printf(m, "CPU variant\t: 0x%x\n", - (read_cpuid_id() >> 20) & 15); + if ((cpuid & 0x0008f000) == 0x00007000) { + /* ARM7 */ + seq_printf(m, "CPU variant\t: 0x%02x\n", + (cpuid >> 16) & 127); + } else { + /* post-ARM7 */ + seq_printf(m, "CPU variant\t: 0x%x\n", + (cpuid >> 20) & 15); + } + seq_printf(m, "CPU part\t: 0x%03x\n", + (cpuid >> 4) & 0xfff); } - seq_printf(m, "CPU part\t: 0x%03x\n", - (read_cpuid_id() >> 4) & 0xfff); + seq_printf(m, "CPU revision\t: %d\n\n", cpuid & 15); } - seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15); - - seq_puts(m, "\n"); seq_printf(m, "Hardware\t: %s\n", machine_name); seq_printf(m, "Revision\t: %04x\n", system_rev); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index fbc8b2623d82..84f4cbf652e5 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -281,6 +281,7 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid) struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); cpu_info->loops_per_jiffy = loops_per_jiffy; + cpu_info->cpuid = read_cpuid_id(); store_cpu_topology(cpuid); } @@ -313,9 +314,10 @@ asmlinkage void __cpuinit secondary_start_kernel(void) current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); + cpu_init(); + printk("CPU%u: Booted secondary processor\n", cpu); - cpu_init(); preempt_disable(); trace_hardirqs_off(); @@ -371,6 +373,7 @@ void __init smp_cpus_done(unsigned int max_cpus) void __init smp_prepare_boot_cpu(void) { + set_my_cpu_offset(per_cpu_offset(smp_processor_id())); } void __init smp_prepare_cpus(unsigned int max_cpus) @@ -421,6 +424,11 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask) smp_cross_call(mask, IPI_CALL_FUNC); } +void arch_send_wakeup_ipi_mask(const struct cpumask *mask) +{ + smp_cross_call(mask, IPI_WAKEUP); +} + void arch_send_call_function_single_ipi(int cpu) { smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); @@ -443,7 +451,7 @@ void show_ipi_list(struct seq_file *p, int prec) for (i = 0; i < NR_IPI; i++) { seq_printf(p, "%*s%u: ", prec - 1, "IPI", i); - for_each_present_cpu(cpu) + for_each_online_cpu(cpu) seq_printf(p, "%10u ", __get_irq_stat(cpu, ipi_irqs[i])); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index b22d700fea27..49f335d301ba 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -31,6 +31,8 @@ static void __iomem *twd_base; static struct clk *twd_clk; static unsigned long twd_timer_rate; +static bool common_setup_called; +static DEFINE_PER_CPU(bool, percpu_setup_called); static struct clock_event_device __percpu **twd_evt; static int twd_ppi; @@ -248,17 +250,9 @@ static struct clk *twd_get_clock(void) return clk; } - err = clk_prepare(clk); + err = clk_prepare_enable(clk); if (err) { - pr_err("smp_twd: clock failed to prepare: %d\n", err); - clk_put(clk); - return ERR_PTR(err); - } - - err = clk_enable(clk); - if (err) { - pr_err("smp_twd: clock failed to enable: %d\n", err); - clk_unprepare(clk); + pr_err("smp_twd: clock failed to prepare+enable: %d\n", err); clk_put(clk); return ERR_PTR(err); } @@ -272,15 +266,45 @@ static struct clk *twd_get_clock(void) static int __cpuinit twd_timer_setup(struct clock_event_device *clk) { struct clock_event_device **this_cpu_clk; + int cpu = smp_processor_id(); + + /* + * If the basic setup for this CPU has been done before don't + * bother with the below. + */ + if (per_cpu(percpu_setup_called, cpu)) { + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + clockevents_register_device(*__this_cpu_ptr(twd_evt)); + enable_percpu_irq(clk->irq, 0); + return 0; + } + per_cpu(percpu_setup_called, cpu) = true; - if (!twd_clk) + /* + * This stuff only need to be done once for the entire TWD cluster + * during the runtime of the system. + */ + if (!common_setup_called) { twd_clk = twd_get_clock(); - if (!IS_ERR_OR_NULL(twd_clk)) - twd_timer_rate = clk_get_rate(twd_clk); - else - twd_calibrate_rate(); + /* + * We use IS_ERR_OR_NULL() here, because if the clock stubs + * are active we will get a valid clk reference which is + * however NULL and will return the rate 0. In that case we + * need to calibrate the rate instead. + */ + if (!IS_ERR_OR_NULL(twd_clk)) + twd_timer_rate = clk_get_rate(twd_clk); + else + twd_calibrate_rate(); + + common_setup_called = true; + } + /* + * The following is done once per CPU the first time .setup() is + * called. + */ __raw_writel(0, twd_base + TWD_TIMER_CONTROL); clk->name = "local_timer"; @@ -366,10 +390,8 @@ void __init twd_local_timer_of_register(void) int err; np = of_find_matching_node(NULL, twd_of_match); - if (!np) { - err = -ENODEV; - goto out; - } + if (!np) + return; twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index c2a898aa57aa..3151f5623d0e 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -28,37 +28,6 @@ #include <linux/uaccess.h> #include <linux/slab.h> -/* Fork a new task - this creates a new program thread. - * This is called indirectly via a small wrapper - */ -asmlinkage int sys_fork(struct pt_regs *regs) -{ -#ifdef CONFIG_MMU - return do_fork(SIGCHLD, regs->ARM_sp, regs, 0, NULL, NULL); -#else - /* can not support in nommu mode */ - return(-EINVAL); -#endif -} - -/* Clone a task - this clones the calling program thread. - * This is called indirectly via a small wrapper - */ -asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, - int __user *parent_tidptr, int tls_val, - int __user *child_tidptr, struct pt_regs *regs) -{ - if (!newsp) - newsp = regs->ARM_sp; - - return do_fork(clone_flags, newsp, regs, 0, parent_tidptr, child_tidptr); -} - -asmlinkage int sys_vfork(struct pt_regs *regs) -{ - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->ARM_sp, regs, 0, NULL, NULL); -} - /* * Since loff_t is a 64 bit type we avoid a lot of ABI hassle * with a different argument ordering. diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 26c12c6440fc..79282ebcd939 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -196,32 +196,7 @@ static inline void parse_dt_topology(void) {} static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} #endif - -/* - * cpu topology management - */ - -#define MPIDR_SMP_BITMASK (0x3 << 30) -#define MPIDR_SMP_VALUE (0x2 << 30) - -#define MPIDR_MT_BITMASK (0x1 << 24) - -/* - * These masks reflect the current use of the affinity levels. - * The affinity level can be up to 16 bits according to ARM ARM - */ -#define MPIDR_HWID_BITMASK 0xFFFFFF - -#define MPIDR_LEVEL0_MASK 0x3 -#define MPIDR_LEVEL0_SHIFT 0 - -#define MPIDR_LEVEL1_MASK 0xF -#define MPIDR_LEVEL1_SHIFT 8 - -#define MPIDR_LEVEL2_MASK 0xFF -#define MPIDR_LEVEL2_SHIFT 16 - -/* + /* * cpu topology table */ struct cputopo_arm cpu_topology[NR_CPUS]; @@ -282,19 +257,14 @@ void store_cpu_topology(unsigned int cpuid) if (mpidr & MPIDR_MT_BITMASK) { /* core performance interdependency */ - cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT) - & MPIDR_LEVEL0_MASK; - cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT) - & MPIDR_LEVEL1_MASK; - cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT) - & MPIDR_LEVEL2_MASK; + cpuid_topo->thread_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpuid_topo->socket_id = MPIDR_AFFINITY_LEVEL(mpidr, 2); } else { /* largely independent cores */ cpuid_topo->thread_id = -1; - cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT) - & MPIDR_LEVEL0_MASK; - cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT) - & MPIDR_LEVEL1_MASK; + cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cpuid_topo->socket_id = MPIDR_AFFINITY_LEVEL(mpidr, 1); } } else { /* diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 36ff15bbfdd4..b9f38e388b43 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -114,6 +114,15 @@ SECTIONS RO_DATA(PAGE_SIZE) + . = ALIGN(4); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; +#ifdef CONFIG_MMU + *(__ex_table) +#endif + __stop___ex_table = .; + } + #ifdef CONFIG_ARM_UNWIND /* * Stack unwinding tables @@ -220,16 +229,6 @@ SECTIONS READ_MOSTLY_DATA(L1_CACHE_BYTES) /* - * The exception fixup table (might need resorting at runtime) - */ - . = ALIGN(4); - __start___ex_table = .; -#ifdef CONFIG_MMU - *(__ex_table) -#endif - __stop___ex_table = .; - - /* * and the usual data section */ DATA_DATA diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 043624219b55..958358c91afd 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -39,7 +39,6 @@ config SOC_AT91RM9200 config SOC_AT91SAM9260 bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20" select HAVE_AT91_DBGU0 - select HAVE_NET_MACB select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE @@ -57,7 +56,6 @@ config SOC_AT91SAM9263 bool "AT91SAM9263" select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL - select HAVE_NET_MACB select SOC_AT91SAM9 config SOC_AT91SAM9RL @@ -70,7 +68,6 @@ config SOC_AT91SAM9G45 bool "AT91SAM9G45 or AT91SAM9M10 families" select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL - select HAVE_NET_MACB select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9G45 family SoC. @@ -80,7 +77,6 @@ config SOC_AT91SAM9X5 bool "AT91SAM9x5 family" select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL - select HAVE_NET_MACB select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9x5 family SoC. @@ -494,8 +490,17 @@ endif comment "Generic Board Type" +config MACH_AT91RM9200_DT + bool "Atmel AT91RM9200 Evaluation Kits with device-tree support" + depends on SOC_AT91RM9200 + select USE_OF + help + Select this if you want to experiment device-tree with + an Atmel RM9200 Evaluation Kit. + config MACH_AT91SAM_DT bool "Atmel AT91SAM Evaluation Kits with device-tree support" + depends on SOC_AT91SAM9 select USE_OF help Select this if you want to experiment device-tree with diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 3bb7a51efc9d..b38a1dcb79b8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree +obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o # AT91X40 board-specific support diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/at91_aic.h index eaea66197fa1..eaea66197fa1 100644 --- a/arch/arm/mach-at91/include/mach/at91_aic.h +++ b/arch/arm/mach-at91/at91_aic.h diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h index 875fa336800b..875fa336800b 100644 --- a/arch/arm/mach-at91/include/mach/at91_rstc.h +++ b/arch/arm/mach-at91/at91_rstc.h diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h index 60478ea8bd46..60478ea8bd46 100644 --- a/arch/arm/mach-at91/include/mach/at91_shdwc.h +++ b/arch/arm/mach-at91/at91_shdwc.h diff --git a/arch/arm/mach-at91/include/mach/at91_tc.h b/arch/arm/mach-at91/at91_tc.h index 46a317fd7164..46a317fd7164 100644 --- a/arch/arm/mach-at91/include/mach/at91_tc.h +++ b/arch/arm/mach-at91/at91_tc.h diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 5269825194a8..8ce068240c69 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -17,11 +17,11 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91rm9200.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> #include <mach/cpu.h> +#include "at91_aic.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -194,6 +194,24 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), CLKDEV_CON_ID("pioD", &pioD_clk), + /* usart lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fffc0000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "fffc4000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "fffc8000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "fffcc000.serial", &usart3_clk), + /* tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), + CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -361,10 +379,10 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -struct at91_init_soc __initdata at91rm9200_soc = { +AT91_SOC_START(rm9200) .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, .ioremap_registers = at91rm9200_ioremap_registers, .register_clocks = at91rm9200_register_clocks, .init = at91rm9200_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 3cee0e6ea7c3..2a1f8e67683d 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -18,11 +18,11 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> -#include <mach/board.h> #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index aaa443b48c91..cafe98836c8a 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -24,6 +24,9 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/export.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -91,7 +94,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) static struct irqaction at91rm9200_timer_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91rm9200_timer_interrupt + .handler = at91rm9200_timer_interrupt, + .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; static cycle_t read_clk32k(struct clocksource *cs) @@ -179,8 +183,60 @@ static struct clock_event_device clkevt = { void __iomem *at91_st_base; EXPORT_SYMBOL_GPL(at91_st_base); +#ifdef CONFIG_OF +static struct of_device_id at91rm9200_st_timer_ids[] = { + { .compatible = "atmel,at91rm9200-st" }, + { /* sentinel */ } +}; + +static int __init of_at91rm9200_st_init(void) +{ + struct device_node *np; + int ret; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (!np) + goto err; + + at91_st_base = of_iomap(np, 0); + if (!at91_st_base) + goto node_err; + + /* Get the interrupts property */ + ret = irq_of_parse_and_map(np, 0); + if (!ret) + goto ioremap_err; + at91rm9200_timer_irq.irq = ret; + + of_node_put(np); + + return 0; + +ioremap_err: + iounmap(at91_st_base); +node_err: + of_node_put(np); +err: + return -EINVAL; +} +#else +static int __init of_at91rm9200_st_init(void) +{ + return -EINVAL; +} +#endif + void __init at91rm9200_ioremap_st(u32 addr) { +#ifdef CONFIG_OF + struct device_node *np; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (np) { + of_node_put(np); + return; + } +#endif at91_st_base = ioremap(addr, 256); if (!at91_st_base) panic("Impossible to ioremap ST\n"); @@ -191,13 +247,16 @@ void __init at91rm9200_ioremap_st(u32 addr) */ void __init at91rm9200_timer_init(void) { + /* For device tree enabled device: initialize here */ + of_at91rm9200_st_init(); + /* Disable all timer interrupts, and clear any pending ones */ at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index f8202615f4a8..c65e7b8d7a81 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -20,10 +20,10 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -230,11 +230,15 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -390,10 +394,10 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9260_soc = { +AT91_SOC_START(sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, .init = at91sam9260_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 414bd855fb0c..1f6fac21b2c8 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -19,7 +19,6 @@ #include <linux/platform_data/at91_adc.h> -#include <mach/board.h> #include <mach/cpu.h> #include <mach/at91sam9260.h> #include <mach/at91sam9260_matrix.h> @@ -27,6 +26,7 @@ #include <mach/at91sam9_smc.h> #include <mach/at91_adc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 04295c04b3e0..9d3e9b8b9926 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -19,10 +19,10 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -334,10 +334,10 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9261_soc = { +AT91_SOC_START(sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, .init = at91sam9261_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index cd604aad8e96..6ce6d27e2442 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -21,12 +21,12 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9261.h> #include <mach/at91sam9261_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index d6f9c23927c4..82deb4d748b2 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -211,7 +211,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -365,10 +372,10 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -struct at91_init_soc __initdata at91sam9263_soc = { +AT91_SOC_START(sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, .init = at91sam9263_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 9c61e59a2104..fb98163b9b3a 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -20,12 +20,12 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index ffc0957d7623..358412f1f5f8 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -20,8 +20,18 @@ #include <asm/mach/time.h> -#include <mach/at91_pit.h> - +#define AT91_PIT_MR 0x00 /* Mode Register */ +#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ +#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ +#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ + +#define AT91_PIT_SR 0x04 /* Status Register */ +#define AT91_PIT_PITS (1 << 0) /* Timer Status */ + +#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ +#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ +#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ +#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) #define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index 7af2e108b8a0..f039538d3bdb 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -16,7 +16,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> #include <mach/at91_ramc.h> -#include <mach/at91_rstc.h> +#include "at91_rstc.h" .arm diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index b7ae124c16e5..45d753d473f6 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9g45.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> +#include "at91_aic.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -256,10 +256,18 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), @@ -408,10 +416,10 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -struct at91_init_soc __initdata at91sam9g45_soc = { +AT91_SOC_START(sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, .init = at91sam9g45_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index fcd233cb33d2..e35964201a10 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -26,7 +26,6 @@ #include <video/atmel_lcdc.h> #include <mach/at91_adc.h> -#include <mach/board.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91_matrix.h> @@ -36,6 +35,7 @@ #include <media/atmel-isi.h> +#include "board.h" #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S index 9d457182c86c..721a1a34dd1d 100644 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -13,8 +13,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> #include <mach/at91_ramc.h> -#include <mach/at91_rstc.h> - +#include "at91_rstc.h" .arm .globl at91sam9g45_restart diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 732d3d3f4ec5..5dfc8fd87103 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -15,8 +15,8 @@ #include <mach/at91sam9n12.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> -#include <mach/board.h> +#include "board.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -168,13 +168,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk), CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk), @@ -223,13 +224,10 @@ static void __init at91sam9n12_map_io(void) void __init at91sam9n12_initialize(void) { at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); - - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); } -struct at91_init_soc __initdata at91sam9n12_soc = { +AT91_SOC_START(sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, .init = at91sam9n12_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 72e908412222..44e3a633fda7 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -19,10 +19,10 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -338,10 +338,10 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9rl_soc = { +AT91_SOC_START(sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, .ioremap_registers = at91sam9rl_ioremap_registers, .register_clocks = at91sam9rl_register_clocks, .init = at91sam9rl_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 5047bdc92adf..160384d93db2 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -17,13 +17,13 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9rl.h> #include <mach/at91sam9rl_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <linux/platform_data/dma-atmel.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index e5035380dcbc..dfb2c0c13fb5 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -15,8 +15,8 @@ #include <mach/at91sam9x5.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> -#include <mach/board.h> +#include "board.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -229,15 +229,17 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), @@ -313,18 +315,11 @@ static void __init at91sam9x5_map_io(void) at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); } -void __init at91sam9x5_initialize(void) -{ - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); -} - /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ -struct at91_init_soc __initdata at91sam9x5_soc = { +AT91_SOC_START(sam9x5) .map_io = at91sam9x5_map_io, .register_clocks = at91sam9x5_register_clocks, - .init = at91sam9x5_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index bb7f54474b92..19ca79396905 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -18,9 +18,10 @@ #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> -#include <mach/at91_aic.h> #include <mach/at91_st.h> #include <mach/timex.h> + +#include "at91_aic.h" #include "generic.h" /* diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index ee06d7bcdf76..0e57e440c061 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -26,7 +26,8 @@ #include <linux/io.h> #include <mach/hardware.h> #include <asm/mach/time.h> -#include <mach/at91_tc.h> + +#include "at91_tc.h" #define at91_tc_read(field) \ __raw_readl(AT91_IO_P2V(AT91_TC) + field) diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 22d8856094f1..b99b5752cc10 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -34,10 +34,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> #include <mach/cpu.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 93a832f70232..854b97974287 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -43,9 +43,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> - +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 477e708497bc..28a18ce6d914 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -38,10 +38,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 71d8f362a1d5..c17bb533a949 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -35,9 +35,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index e71c473316e3..847432441ecc 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -40,12 +40,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2cbd1a2b6c35..2a7af7868747 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -36,12 +36,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static struct gpio_led cpuat91_leds[] = { diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 3e37437a7a61..48a531e05be3 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -38,9 +38,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" @@ -53,6 +53,8 @@ static void __init csb337_init_early(void) static struct macb_platform_data __initdata csb337_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 0, + /* The CSB337 bootloader stores the MAC the wrong-way around */ + .rev_eth_addr = 1, }; static struct at91_usbh_data __initdata csb337_usbh_data = { diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 872871ab1160..ec0f3abd504b 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -35,9 +35,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index e8f45c4e0ea8..881170ce61dd 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -15,23 +15,20 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <mach/board.h> -#include <mach/at91_aic.h> - #include <asm/setup.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static const struct of_device_id irq_of_match[] __initconst = { { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup }, - { .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup }, { /*sentinel*/ } }; diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index 01f66e99ece7..b489388a6f84 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -27,8 +27,9 @@ #include <mach/hardware.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/at91_aic.h> + +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init at91eb01_init_irq(void) diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 0cfac16ee9d5..9f5e71c95f05 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -35,9 +35,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> - +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 3d931ffac4bf..ef69e0ebe949 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -37,10 +37,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> #include <mach/cpu.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index d93658a2b128..50f3d3795c05 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -24,12 +24,12 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init eco920_init_early(void) diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index fa98abacb1ba..5d44eba0f20f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -33,9 +33,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init flexibity_init_early(void) diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 6e47071d8206..191d37c16bab 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -41,10 +41,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index a9d5e78118c5..23a2fa17ab29 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -30,14 +30,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/gsia18s.h> -#include <mach/stamp9g20.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gsia18s.h" +#include "stamp9g20.h" static void __init gsia18s_init_early(void) { diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 86050da3ba53..9a43d1e1a037 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -34,10 +34,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index abe9fed7a3e0..f168bec2369f 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -35,12 +35,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> #include <mach/cpu.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 6960778af4c2..bc7a1c4a1f6a 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -44,10 +44,10 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 9ca3e32c54cb..0299554495dd 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -29,13 +29,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/stamp9g20.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "stamp9g20.h" static void __init pcontrol_g20_init_early(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index f83e1de699e6..4938f1cd5e13 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -37,11 +37,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 799f214edebe..33b1628467ea 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -40,11 +40,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c new file mode 100644 index 000000000000..5f9ce3da3fde --- /dev/null +++ b/arch/arm/mach-at91/board-rm9200-dt.c @@ -0,0 +1,57 @@ +/* + * Setup code for AT91RM9200 Evaluation Kits with Device Tree support + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "at91_aic.h" +#include "generic.h" + + +static const struct of_device_id irq_of_match[] __initconst = { + { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, + { /*sentinel*/ } +}; + +static void __init at91rm9200_dt_init_irq(void) +{ + of_irq_init(irq_of_match); +} + +static void __init at91rm9200_dt_device_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *at91rm9200_dt_board_compat[] __initdata = { + "atmel,at91rm9200", + NULL +}; + +DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") + .timer = &at91rm9200_timer, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = at91rm9200_dt_initialize, + .init_irq = at91rm9200_dt_init_irq, + .init_machine = at91rm9200_dt_device_init, + .dt_compat = at91rm9200_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 66338e7ebfba..9e5061bef0d0 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -39,11 +39,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 5d1b5729dc69..58277dbc718f 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -39,11 +39,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index a0ecf04e9ae3..2e8b8339a206 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -25,11 +25,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <linux/gpio.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init rsi_ews_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index c5f01acce3c0..b75fbf6003a1 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -37,10 +37,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 8cd6e679fbe0..f0135cd1d858 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -41,12 +41,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index a9167dd45f96..13ebaa8e4100 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -45,12 +45,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index b87dbe2be0d6..89b9608742a7 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -44,12 +44,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 3ab2b86a3762..7b5123802368 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -43,11 +43,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 3d48ec154685..e4cc375e3a32 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -42,12 +42,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index fb89ea92e3f2..377a1097afa7 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -30,11 +30,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> + +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index a4e031a039fd..98771500ddb9 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -32,10 +32,10 @@ #include <asm/mach/arch.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index c3fb31d5116e..48a962b61fa3 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -25,10 +25,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 6ea069b57335..c1060f96e589 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -41,11 +41,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index f162fdfd66eb..8673aebcb85d 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -43,12 +43,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/board.h index c55a4364ffb4..4a234fb2ab3b 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/board.h @@ -31,71 +31,24 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H -#include <linux/mtd/partitions.h> -#include <linux/device.h> -#include <linux/i2c.h> -#include <linux/leds.h> -#include <linux/spi/spi.h> -#include <linux/usb/atmel_usba_udc.h> -#include <linux/atmel-mci.h> -#include <sound/atmel-ac97c.h> -#include <linux/serial.h> -#include <linux/platform_data/macb.h> #include <linux/platform_data/atmel.h> /* USB Device */ -struct at91_udc_data { - int vbus_pin; /* high == host powering us */ - u8 vbus_active_low; /* vbus polarity */ - u8 vbus_polled; /* Use polling, not interrupt */ - int pullup_pin; /* active == D+ pulled up */ - u8 pullup_active_low; /* true == pullup_pin is active low */ -}; extern void __init at91_add_device_udc(struct at91_udc_data *data); /* USB High Speed Device */ extern void __init at91_add_device_usba(struct usba_platform_data *data); /* Compact Flash */ -struct at91_cf_data { - int irq_pin; /* I/O IRQ */ - int det_pin; /* Card detect */ - int vcc_pin; /* power switching */ - int rst_pin; /* card reset */ - u8 chipselect; /* EBI Chip Select number */ - u8 flags; -#define AT91_CF_TRUE_IDE 0x01 -#define AT91_IDE_SWAP_A0_A2 0x02 -}; extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ - /* at91_mci platform config */ -struct at91_mmc_data { - int det_pin; /* card detect IRQ */ - unsigned slot_b:1; /* uses Slot B */ - unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ - int wp_pin; /* (SD) writeprotect detect */ - int vcc_pin; /* power switching (high == on) */ -}; -extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); - /* atmel-mci platform config */ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data); extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ -#define AT91_MAX_USBH_PORTS 3 -struct at91_usbh_data { - int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ - int overcurrent_pin[AT91_MAX_USBH_PORTS]; - u8 ports; /* number of ports on root hub */ - u8 overcurrent_supported; - u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; - u8 overcurrent_status[AT91_MAX_USBH_PORTS]; - u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; -}; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); @@ -124,13 +77,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin extern struct platform_device *atmel_default_console_device; -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; extern void __init at91_add_device_serial(void); /* @@ -173,24 +119,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); /* Touchscreen Controller */ -struct at91_tsadcc_data { - unsigned int adc_clock; - u8 pendet_debounce; - u8 ts_sample_hold_time; -}; extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); /* CAN */ -struct at91_can_data { - void (*transceiver_switch)(int on); -}; extern void __init at91_add_device_can(struct at91_can_data *data); /* LEDs */ extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); -/* FIXME: this needs a better location, but gets stuff building again */ -extern int at91_suspend_entering_slow_clock(void); - #endif diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index b62f560e6c75..fc593d615e7d 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base, extern void __init at91rm9200_set_type(int type); extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); +extern void __init at91rm9200_dt_initialize(void); extern void __init at91_dt_initialize(void); /* Interrupts */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index be42cf0e74bd..c5d7e1e9d757 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -23,8 +23,6 @@ #include <linux/io.h> #include <linux/irqdomain.h> #include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_gpio.h> #include <asm/mach/irq.h> @@ -33,6 +31,8 @@ #include "generic.h" +#define MAX_NB_GPIO_PER_BANK 32 + struct at91_gpio_chip { struct gpio_chip chip; struct at91_gpio_chip *next; /* Bank sharing same clock */ @@ -46,6 +46,7 @@ struct at91_gpio_chip { #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); @@ -55,26 +56,27 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset); static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); -#define AT91_GPIO_CHIP(name, nr_gpio) \ +#define AT91_GPIO_CHIP(name) \ { \ .chip = { \ .label = name, \ + .request = at91_gpiolib_request, \ .direction_input = at91_gpiolib_direction_input, \ .direction_output = at91_gpiolib_direction_output, \ .get = at91_gpiolib_get, \ .set = at91_gpiolib_set, \ .dbg_show = at91_gpiolib_dbg_show, \ .to_irq = at91_gpiolib_to_irq, \ - .ngpio = nr_gpio, \ + .ngpio = MAX_NB_GPIO_PER_BANK, \ }, \ } static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA", 32), - AT91_GPIO_CHIP("pioB", 32), - AT91_GPIO_CHIP("pioC", 32), - AT91_GPIO_CHIP("pioD", 32), - AT91_GPIO_CHIP("pioE", 32), + AT91_GPIO_CHIP("pioA"), + AT91_GPIO_CHIP("pioB"), + AT91_GPIO_CHIP("pioC"), + AT91_GPIO_CHIP("pioD"), + AT91_GPIO_CHIP("pioE"), }; static int gpio_banks; @@ -89,7 +91,7 @@ static unsigned long at91_gpio_caps; static inline void __iomem *pin_to_controller(unsigned pin) { - pin /= 32; + pin /= MAX_NB_GPIO_PER_BANK; if (likely(pin < gpio_banks)) return gpio_chip[pin].regbase; @@ -98,7 +100,7 @@ static inline void __iomem *pin_to_controller(unsigned pin) static inline unsigned pin_to_mask(unsigned pin) { - return 1 << (pin % 32); + return 1 << (pin % MAX_NB_GPIO_PER_BANK); } @@ -713,80 +715,6 @@ postcore_initcall(at91_gpio_debugfs_init); */ static struct lock_class_key gpio_lock_class; -#if defined(CONFIG_OF) -static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct at91_gpio_chip *at91_gpio = h->host_data; - - irq_set_lockdep_class(virq, &gpio_lock_class); - - /* - * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interrupts sanely. - */ - irq_set_chip_and_handler(virq, &gpio_irqchip, - handle_simple_irq); - set_irq_flags(virq, IRQF_VALID); - irq_set_chip_data(virq, at91_gpio); - - return 0; -} - -static struct irq_domain_ops at91_gpio_ops = { - .map = at91_gpio_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - struct at91_gpio_chip *prev = NULL; - int alias_idx = of_alias_get_id(node, "gpio"); - struct at91_gpio_chip *at91_gpio = &gpio_chip[alias_idx]; - - /* Setup proper .irq_set_type function */ - if (has_pio3()) - gpio_irqchip.irq_set_type = alt_gpio_irq_type; - else - gpio_irqchip.irq_set_type = gpio_irq_type; - - /* Disable irqs of this PIO controller */ - __raw_writel(~0, at91_gpio->regbase + PIO_IDR); - - /* Setup irq domain */ - at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio, - &at91_gpio_ops, at91_gpio); - if (!at91_gpio->domain) - panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n", - at91_gpio->pioc_idx); - - /* Setup chained handler */ - if (at91_gpio->pioc_idx) - prev = &gpio_chip[at91_gpio->pioc_idx - 1]; - - /* The toplevel handler handles one bank of GPIOs, except - * on some SoC it can handles up to three... - * We only set up the handler for the first of the list. - */ - if (prev && prev->next == at91_gpio) - return 0; - - at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent), - at91_gpio->pioc_hwirq); - irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio); - irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler); - - return 0; -} -#else -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - return -EINVAL; -} -#endif - /* * irqdomain initialization: pile up irqdomains on top of AIC range */ @@ -862,6 +790,16 @@ void __init at91_gpio_irq_setup(void) } /* gpiolib support */ +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + __raw_writel(mask, pio + PIO_PER); + return 0; +} + static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset) { @@ -975,81 +913,11 @@ err: return -EINVAL; } -#ifdef CONFIG_OF_GPIO -static void __init of_at91_gpio_init_one(struct device_node *np) -{ - int alias_idx; - struct at91_gpio_chip *at91_gpio; - - if (!np) - return; - - alias_idx = of_alias_get_id(np, "gpio"); - if (alias_idx >= MAX_GPIO_BANKS) { - pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n", - alias_idx, MAX_GPIO_BANKS); - return; - } - - at91_gpio = &gpio_chip[alias_idx]; - at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio; - - at91_gpio->regbase = of_iomap(np, 0); - if (!at91_gpio->regbase) { - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", - alias_idx); - return; - } - - /* Get the interrupts property */ - if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) { - pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n", - alias_idx); - goto ioremap_err; - } - - /* Get capabilities from compatibility property */ - if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio")) - at91_gpio_caps |= AT91_GPIO_CAP_PIO3; - - /* Setup clock */ - if (at91_gpio_setup_clk(alias_idx)) - goto ioremap_err; - - at91_gpio->chip.of_node = np; - gpio_banks = max(gpio_banks, alias_idx + 1); - at91_gpio->pioc_idx = alias_idx; - return; - -ioremap_err: - iounmap(at91_gpio->regbase); -} - -static int __init of_at91_gpio_init(void) -{ - struct device_node *np = NULL; - - /* - * This isn't ideal, but it gets things hooked up until this - * driver is converted into a platform_device - */ - for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio") - of_at91_gpio_init_one(np); - - return gpio_banks > 0 ? 0 : -EINVAL; -} -#else -static int __init of_at91_gpio_init(void) -{ - return -EINVAL; -} -#endif - static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) { struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - at91_gpio->chip.base = idx * at91_gpio->chip.ngpio; + at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK; at91_gpio->pioc_hwirq = pioc_hwirq; at91_gpio->pioc_idx = idx; @@ -1079,11 +947,11 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) BUG_ON(nr_banks > MAX_GPIO_BANKS); - if (of_at91_gpio_init() < 0) { - /* No GPIO controller found in device tree */ - for (i = 0; i < nr_banks; i++) - at91_gpio_init_one(i, data[i].regbase, data[i].id); - } + if (of_have_populated_dt()) + return; + + for (i = 0; i < nr_banks; i++) + at91_gpio_init_one(i, data[i].regbase, data[i].id); for (i = 0; i < gpio_banks; i++) { at91_gpio = &gpio_chip[i]; diff --git a/arch/arm/mach-at91/include/mach/gsia18s.h b/arch/arm/mach-at91/gsia18s.h index 307c194926f9..307c194926f9 100644 --- a/arch/arm/mach-at91/include/mach/gsia18s.h +++ b/arch/arm/mach-at91/gsia18s.h diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h deleted file mode 100644 index d1f80ad7f4d4..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_pit.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_pit.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Periodic Interval Timer (PIT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIT_H -#define AT91_PIT_H - -#define AT91_PIT_MR 0x00 /* Mode Register */ -#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ -#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ -#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ - -#define AT91_PIT_SR 0x04 /* Status Register */ -#define AT91_PIT_PITS (1 << 0) /* Timer Status */ - -#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ -#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ -#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ -#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h deleted file mode 100644 index da1945e5f714..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_rtc.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_rtc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Real Time Clock (RTC) - System peripheral registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RTC_H -#define AT91_RTC_H - -#define AT91_RTC_CR 0x00 /* Control Register */ -#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ -#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ -#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ -#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) -#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) - -#define AT91_RTC_MR 0x04 /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ - -#define AT91_RTC_TIMR 0x08 /* Time Register */ -#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ -#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ -#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ - -#define AT91_RTC_CALR 0x0c /* Calendar Register */ -#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ -#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ -#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ -#define AT91_RTC_DAY (7 << 21) /* Current Day */ -#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ - -#define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */ -#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ -#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ -#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ - -#define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */ -#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ -#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ - -#define AT91_RTC_SR 0x18 /* Status Register */ -#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ -#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ -#define AT91_RTC_SECEV (1 << 2) /* Second Event */ -#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ -#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ - -#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ -#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ -#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ -#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ - -#define AT91_RTC_VER 0x2c /* Valid Entry Register */ -#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ -#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ -#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ -#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_emac.h b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h deleted file mode 100644 index b8260cd8041c..000000000000 --- a/arch/arm/mach-at91/include/mach/at91rm9200_emac.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91rm9200_emac.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Ethernet MAC registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_EMAC_H -#define AT91RM9200_EMAC_H - -#define AT91_EMAC_CTL 0x00 /* Control Register */ -#define AT91_EMAC_LB (1 << 0) /* Loopback */ -#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */ -#define AT91_EMAC_RE (1 << 2) /* Receive Enable */ -#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */ -#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */ -#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */ -#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */ -#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */ -#define AT91_EMAC_BP (1 << 8) /* Back Pressure */ - -#define AT91_EMAC_CFG 0x04 /* Configuration Register */ -#define AT91_EMAC_SPD (1 << 0) /* Speed */ -#define AT91_EMAC_FD (1 << 1) /* Full Duplex */ -#define AT91_EMAC_BR (1 << 2) /* Bit Rate */ -#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */ -#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */ -#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */ -#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */ -#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */ -#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */ -#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */ -#define AT91_EMAC_CLK_DIV8 (0 << 10) -#define AT91_EMAC_CLK_DIV16 (1 << 10) -#define AT91_EMAC_CLK_DIV32 (2 << 10) -#define AT91_EMAC_CLK_DIV64 (3 << 10) -#define AT91_EMAC_RTY (1 << 12) /* Retry Test */ -#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */ - -#define AT91_EMAC_SR 0x08 /* Status Register */ -#define AT91_EMAC_SR_LINK (1 << 0) /* Link */ -#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */ -#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */ - -#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */ - -#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */ -#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */ -#define AT91_EMAC_NCRC (1 << 15) /* No CRC */ - -#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */ -#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */ -#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */ -#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */ -#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */ -#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */ -#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */ -#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */ - -#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */ - -#define AT91_EMAC_RSR 0x20 /* Receive Status Register */ -#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */ -#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */ -#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */ - -#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */ -#define AT91_EMAC_DONE (1 << 0) /* Management Done */ -#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */ -#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */ -#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */ -#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */ -#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */ -#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */ -#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */ -#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */ -#define AT91_EMAC_LINK (1 << 9) /* Link */ -#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */ -#define AT91_EMAC_ABT (1 << 11) /* Abort */ - -#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */ -#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */ -#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */ - -#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */ -#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */ -#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */ -#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */ -#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */ -#define AT91_EMAC_RW_W (1 << 28) -#define AT91_EMAC_RW_R (2 << 28) -#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */ - -/* - * Statistics Registers. - */ -#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */ -#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */ -#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */ -#define AT91_EMAC_OK 0x4c /* Frames Received OK */ -#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */ -#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */ -#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */ -#define AT91_EMAC_LCOL 0x5c /* Late Collision */ -#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */ -#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */ -#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */ -#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */ -#define AT91_EMAC_ROV 0x70 /* Receive Overrun */ -#define AT91_EMAC_CDE 0x74 /* Code Error */ -#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */ -#define AT91_EMAC_RJB 0x7c /* Receive Jabber */ -#define AT91_EMAC_USF 0x80 /* Undersize Frame */ -#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */ - -/* - * Address Registers. - */ -#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */ -#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */ -#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */ -#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */ -#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */ -#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */ -#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */ -#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */ -#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */ -#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 711a7892d331..a832e0707611 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -90,9 +90,6 @@ #define AT91_SRAM_MAX SZ_1M #define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) -/* Serial ports */ -#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */ - /* External Memory Map */ #define AT91_CHIPSELECT_0 0x10000000 #define AT91_CHIPSELECT_1 0x20000000 diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index febc2ee901a5..8e210262aeee 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -42,7 +42,7 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" void __iomem *at91_aic_base; static struct irq_domain *at91_aic_domain; diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 1b1e62b5f41b..3e22978b5547 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <mach/board.h> +#include "board.h" /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5315f05896e9..adb6db888a1f 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -25,10 +25,10 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> +#include "at91_aic.h" #include "generic.h" #include "pm.h" @@ -36,8 +36,8 @@ * Show the reason for the previous system reset. */ -#include <mach/at91_rstc.h> -#include <mach/at91_shdwc.h> +#include "at91_rstc.h" +#include "at91_shdwc.h" static void __init show_reset_status(void) { diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 0b32c81730a5..9ee866ce0478 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -10,6 +10,7 @@ #include <linux/mm.h> #include <linux/pm.h> #include <linux/of_address.h> +#include <linux/pinctrl/machine.h> #include <asm/system_misc.h> #include <asm/mach/map.h> @@ -18,8 +19,8 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91_pmc.h> -#include <mach/at91_shdwc.h> +#include "at91_shdwc.h" #include "soc.h" #include "generic.h" @@ -338,6 +339,7 @@ static void at91_dt_rstc(void) } static struct of_device_id ramc_ids[] = { + { .compatible = "atmel,at91rm9200-sdramc" }, { .compatible = "atmel,at91sam9260-sdramc" }, { .compatible = "atmel,at91sam9g45-ddramc" }, { /*sentinel*/ } @@ -436,6 +438,19 @@ end: of_node_put(np); } +void __init at91rm9200_dt_initialize(void) +{ + at91_dt_ramc(); + + /* Init clock subsystem */ + at91_dt_clock_init(); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} + void __init at91_dt_initialize(void) { at91_dt_rstc(); @@ -448,7 +463,8 @@ void __init at91_dt_initialize(void) /* Register the processor-specific clocks */ at91_boot_soc.register_clocks(); - at91_boot_soc.init(); + if (at91_boot_soc.init) + at91_boot_soc.init(); } #endif @@ -463,4 +479,6 @@ void __init at91_initialize(unsigned long main_clock) at91_boot_soc.register_clocks(); at91_boot_soc.init(); + + pinctrl_provide_dummies(); } diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index a9cfeb153719..9c6d3d4f9a23 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -5,6 +5,7 @@ */ struct at91_init_soc { + int builtin; unsigned int *default_irq_priority; void (*map_io)(void); void (*ioremap_registers)(void); @@ -22,9 +23,18 @@ extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9n12_soc; +#define AT91_SOC_START(_name) \ +struct at91_init_soc __initdata at91##_name##_soc \ + __used \ + = { \ + .builtin = 1, \ + +#define AT91_SOC_END \ +}; + static inline int at91_soc_is_enabled(void) { - return at91_boot_soc.init != NULL; + return at91_boot_soc.builtin; } #if !defined(CONFIG_SOC_AT91RM9200) diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/stamp9g20.h index f62c0abca4b4..f62c0abca4b4 100644 --- a/arch/arm/mach-at91/include/mach/stamp9g20.h +++ b/arch/arm/mach-at91/stamp9g20.h diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig new file mode 100644 index 000000000000..48705c10a0fe --- /dev/null +++ b/arch/arm/mach-bcm/Kconfig @@ -0,0 +1,19 @@ +config ARCH_BCM + bool "Broadcom SoC" if ARCH_MULTI_V7 + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_GIC + select CPU_V7 + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select GENERIC_TIME + select GPIO_BCM + select SPARSE_IRQ + select TICK_ONESHOT + help + This enables support for system based on Broadcom SoCs. + It currently supports the 'BCM281XX' family, which includes + BCM11130, BCM11140, BCM11351, BCM28145 and + BCM28155 variants. diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile new file mode 100644 index 000000000000..bbf412261e5e --- /dev/null +++ b/arch/arm/mach-bcm/Makefile @@ -0,0 +1,13 @@ +# +# Copyright (C) 2012 Broadcom Corporation +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation version 2. +# +# This program is distributed "as is" WITHOUT ANY WARRANTY of any +# kind, whether express or implied; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +obj-$(CONFIG_ARCH_BCM) := board_bcm.o diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c new file mode 100644 index 000000000000..3a62f1b1cabc --- /dev/null +++ b/arch/arm/mach-bcm/board_bcm.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/hardware/gic.h> + +#include <asm/mach/time.h> + +static const struct of_device_id irq_match[] = { + {.compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {} +}; + +static void timer_init(void) +{ +} + +static struct sys_timer timer = { + .init = timer_init, +}; + +static void __init init_irq(void) +{ + of_irq_init(irq_match); +} + +static void __init board_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, + &platform_bus); +} + +static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; + +DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") + .init_irq = init_irq, + .timer = &timer, + .init_machine = board_init, + .dt_compat = bcm11351_dt_compat, + .handle_irq = gic_handle_irq, +MACHINE_END diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index 53e3842c9330..f0d739f4b7a3 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -12,8 +12,10 @@ * GNU General Public License for more details. */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/irqchip/bcm2835.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/bcm2835_timer.h> #include <linux/clk/bcm2835.h> @@ -23,6 +25,48 @@ #include <mach/bcm2835_soc.h> +#define PM_RSTC 0x1c +#define PM_WDOG 0x24 + +#define PM_PASSWORD 0x5a000000 +#define PM_RSTC_WRCFG_MASK 0x00000030 +#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 + +static void __iomem *wdt_regs; + +/* + * The machine restart method can be called from an atomic context so we won't + * be able to ioremap the regs then. + */ +static void bcm2835_setup_restart(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "brcm,bcm2835-pm-wdt"); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_regs = of_iomap(np, 0); + WARN(!wdt_regs, "failed to remap watchdog regs"); +} + +static void bcm2835_restart(char mode, const char *cmd) +{ + u32 val; + + if (!wdt_regs) + return; + + /* use a timeout of 10 ticks (~150us) */ + writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG); + val = readl_relaxed(wdt_regs + PM_RSTC); + val &= ~PM_RSTC_WRCFG_MASK; + val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; + writel_relaxed(val, wdt_regs + PM_RSTC); + + /* No sleeping, possibly atomic. */ + mdelay(1); +} + static struct map_desc io_map __initdata = { .virtual = BCM2835_PERIPH_VIRT, .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS), @@ -39,6 +83,7 @@ static void __init bcm2835_init(void) { int ret; + bcm2835_setup_restart(); bcm2835_init_clocks(); ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, @@ -60,5 +105,6 @@ DT_MACHINE_START(BCM2835, "BCM2835") .handle_irq = bcm2835_handle_irq, .init_machine = bcm2835_init, .timer = &bcm2835_timer, + .restart = bcm2835_restart, .dt_compat = bcm2835_compat MACHINE_END diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h new file mode 100644 index 000000000000..40a8c178f10d --- /dev/null +++ b/arch/arm/mach-bcm2835/include/mach/gpio.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 263242da2cb8..2d00165e85ec 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -10,7 +10,6 @@ config ARCH_AUTCPU12 config ARCH_CDB89712 bool "CDB89712" - select ISA help This is an evaluation board from Cirrus for the CS89712 processor. The board includes 2 serial ports, Ethernet, IRDA, and expansion @@ -25,7 +24,6 @@ config ARCH_EDB7211 bool "EDB7211" select ARCH_SELECT_MEMORY_MODEL select ARCH_SPARSEMEM_ENABLE - select ISA help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 6da6940b3656..992995af666a 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -9,9 +9,9 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o -obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o -obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o -obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o -obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o -obj-$(CONFIG_ARCH_P720T) += p720t.o +obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o +obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o +obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o +obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o +obj-$(CONFIG_ARCH_FORTUNET) += board-fortunet.o +obj-$(CONFIG_ARCH_P720T) += board-p720t.o diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot index 9398e859b5af..eba77d35a615 100644 --- a/arch/arm/mach-clps711x/Makefile.boot +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -1,5 +1,4 @@ # The standard locations for stuff on CLPS711x type processors - zreladdr-y += 0xc0028000 params_phys-y := 0xc0000100 # Should probably have some agreement on these... initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c deleted file mode 100644 index 32871918bb6e..000000000000 --- a/arch/arm/mach-clps711x/autcpu12.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/autcpu12.c - * - * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <mach/hardware.h> -#include <asm/sizes.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> -#include <mach/autcpu12.h> - -#include "common.h" - -/* - * The on-chip registers are given a size of 1MB so that a section can - * be used to map them; this saves a page table. This is the place to - * add mappings for ROM, expansion memory, PCMCIA, etc. (if static - * mappings are chosen for those areas). - * -*/ - -static struct map_desc autcpu12_io_desc[] __initdata = { - /* memory-mapped extra io and CS8900A Ethernet chip */ - /* ethernet chip */ - { - .virtual = AUTCPU12_VIRT_CS8900A, - .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A), - .length = SZ_1M, - .type = MT_DEVICE - } -}; - -void __init autcpu12_map_io(void) -{ - clps711x_map_io(); - iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc)); -} - -static struct resource autcpu12_nvram_resource[] __initdata = { - DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"), -}; - -static struct platform_device autcpu12_nvram_pdev __initdata = { - .name = "autcpu12_nvram", - .id = -1, - .resource = autcpu12_nvram_resource, - .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), -}; - -static void __init autcpu12_init(void) -{ - platform_device_register(&autcpu12_nvram_pdev); -} - -MACHINE_START(AUTCPU12, "autronix autcpu12") - /* Maintainer: Thomas Gleixner */ - .atag_offset = 0x20000, - .init_machine = autcpu12_init, - .map_io = autcpu12_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END - diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c new file mode 100644 index 000000000000..3fbf43f72589 --- /dev/null +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -0,0 +1,179 @@ +/* + * linux/arch/arm/mach-clps711x/autcpu12.c + * + * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand-gpio.h> +#include <linux/platform_device.h> +#include <linux/basic_mmio_gpio.h> + +#include <mach/hardware.h> +#include <asm/sizes.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/pgtable.h> +#include <asm/page.h> + +#include <asm/mach/map.h> +#include <mach/autcpu12.h> + +#include "common.h" + +#define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define AUTCPU12_CS8900_IRQ (IRQ_EINT3) + +#define AUTCPU12_SMC_BASE (CS1_PHYS_BASE + 0x06000000) +#define AUTCPU12_SMC_SEL_BASE (AUTCPU12_SMC_BASE + 0x10) + +#define AUTCPU12_MMGPIO_BASE (CLPS711X_NR_GPIO) +#define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ +#define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) +#define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) +#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 3) + +static struct resource autcpu12_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ), +}; + +static struct resource autcpu12_nvram_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"), +}; + +static struct platform_device autcpu12_nvram_pdev __initdata = { + .name = "autcpu12_nvram", + .id = -1, + .resource = autcpu12_nvram_resource, + .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), +}; + +static struct resource autcpu12_nand_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16), +}; + +static struct mtd_partition autcpu12_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_8M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata, + size_t sz) +{ + switch (sz) { + case SZ_16M: + case SZ_32M: + break; + case SZ_64M: + case SZ_128M: + pdata->parts[0].size = SZ_16M; + break; + default: + pr_warn("Unsupported SmartMedia device size %u\n", sz); + break; + } +} + +static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = { + .gpio_rdy = AUTCPU12_SMC_RDY, + .gpio_nce = AUTCPU12_SMC_NCE, + .gpio_ale = AUTCPU12_SMC_ALE, + .gpio_cle = AUTCPU12_SMC_CLE, + .gpio_nwp = -1, + .chip_delay = 20, + .parts = autcpu12_nand_parts, + .num_parts = ARRAY_SIZE(autcpu12_nand_parts), + .adjust_parts = autcpu12_adjust_parts, +}; + +static struct platform_device autcpu12_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = autcpu12_nand_resource, + .num_resources = ARRAY_SIZE(autcpu12_nand_resource), + .dev = { + .platform_data = &autcpu12_nand_pdata, + }, +}; + +static struct resource autcpu12_mmgpio_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"), +}; + +static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = { + .base = AUTCPU12_MMGPIO_BASE, + .ngpio = 8, +}; + +static struct platform_device autcpu12_mmgpio_pdev __initdata = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = autcpu12_mmgpio_resource, + .num_resources = ARRAY_SIZE(autcpu12_mmgpio_resource), + .dev = { + .platform_data = &autcpu12_mmgpio_pdata, + }, +}; + +static void __init autcpu12_init(void) +{ + platform_device_register_simple("video-clps711x", 0, NULL, 0); + platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, + ARRAY_SIZE(autcpu12_cs8900_resource)); + platform_device_register(&autcpu12_mmgpio_pdev); + platform_device_register(&autcpu12_nvram_pdev); +} + +static void __init autcpu12_init_late(void) +{ + if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) { + /* We are need both drivers to handle NAND */ + platform_device_register(&autcpu12_nand_pdev); + } +} + +MACHINE_START(AUTCPU12, "autronix autcpu12") + /* Maintainer: Thomas Gleixner */ + .atag_offset = 0x20000, + .nr_irqs = CLPS711X_NR_IRQS, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .init_machine = autcpu12_init, + .init_late = autcpu12_init_late, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END + diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c new file mode 100644 index 000000000000..60900ddf97c9 --- /dev/null +++ b/arch/arm/mach-clps711x/board-cdb89712.c @@ -0,0 +1,147 @@ +/* + * linux/arch/arm/mach-clps711x/cdb89712.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> +#include <linux/mtd/partitions.h> + +#include <mach/hardware.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +#define CDB89712_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define CDB89712_CS8900_IRQ (IRQ_EINT3) + +static struct resource cdb89712_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(CDB89712_CS8900_IRQ), +}; + +static struct mtd_partition cdb89712_flash_partitions[] __initdata = { + { + .name = "Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_flash_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_flash_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_flash_partitions), +}; + +static struct resource cdb89712_flash_resources[] __initdata = { + DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M), +}; + +static struct platform_device cdb89712_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = cdb89712_flash_resources, + .num_resources = ARRAY_SIZE(cdb89712_flash_resources), + .dev = { + .platform_data = &cdb89712_flash_pdata, + }, +}; + +static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = { + { + .name = "BootROM", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_bootrom_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_bootrom_partitions), +}; + +static struct resource cdb89712_bootrom_resources[] __initdata = { + DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM | + IORESOURCE_CACHEABLE | IORESOURCE_READONLY), +}; + +static struct platform_device cdb89712_bootrom_pdev __initdata = { + .name = "physmap-flash", + .id = 1, + .resource = cdb89712_bootrom_resources, + .num_resources = ARRAY_SIZE(cdb89712_bootrom_resources), + .dev = { + .platform_data = &cdb89712_bootrom_pdata, + }, +}; + +static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = { + .bankwidth = 4, +}; + +static struct resource cdb89712_sram_resources[] __initdata = { + DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE), +}; + +static struct platform_device cdb89712_sram_pdev __initdata = { + .name = "mtd-ram", + .id = 0, + .resource = cdb89712_sram_resources, + .num_resources = ARRAY_SIZE(cdb89712_sram_resources), + .dev = { + .platform_data = &cdb89712_sram_pdata, + }, +}; + +static void __init cdb89712_init(void) +{ + platform_device_register(&cdb89712_flash_pdev); + platform_device_register(&cdb89712_bootrom_pdev); + platform_device_register(&cdb89712_sram_pdev); + platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource, + ARRAY_SIZE(cdb89712_cs8900_resource)); +} + +MACHINE_START(CDB89712, "Cirrus-CDB89712") + /* Maintainer: Ray Lehtiniemi */ + .atag_offset = 0x100, + .nr_irqs = CLPS711X_NR_IRQS, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .init_machine = cdb89712_init, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c index dbc7842639dc..0b32a487183b 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -33,14 +33,14 @@ fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) mi->bank[0].size = 0x01000000; } - MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") /* Maintainer: Nobody */ .atag_offset = 0x0100, + .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_clep7312, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END - diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c new file mode 100644 index 000000000000..71aa5cf2c0d3 --- /dev/null +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/memblock.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/backlight.h> +#include <linux/platform_device.h> + +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> + +#include <asm/setup.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <video/platform_lcd.h> + +#include <mach/hardware.h> + +#include "common.h" + +#define VIDEORAM_SIZE SZ_128K + +#define EDB7211_LCD_DC_DC_EN CLPS711X_GPIO(3, 1) +#define EDB7211_LCDEN CLPS711X_GPIO(3, 2) +#define EDB7211_LCDBL CLPS711X_GPIO(3, 3) + +#define EDB7211_FLASH0_BASE (CS0_PHYS_BASE) +#define EDB7211_FLASH1_BASE (CS1_PHYS_BASE) +#define EDB7211_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define EDB7211_CS8900_IRQ (IRQ_EINT3) + +static struct resource edb7211_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(EDB7211_CS8900_IRQ), +}; + +static struct mtd_partition edb7211_flash_partitions[] __initdata = { + { + .name = "Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data edb7211_flash_pdata __initdata = { + .width = 4, + .parts = edb7211_flash_partitions, + .nr_parts = ARRAY_SIZE(edb7211_flash_partitions), +}; + +static struct resource edb7211_flash_resources[] __initdata = { + DEFINE_RES_MEM(EDB7211_FLASH0_BASE, SZ_8M), + DEFINE_RES_MEM(EDB7211_FLASH1_BASE, SZ_8M), +}; + +static struct platform_device edb7211_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = edb7211_flash_resources, + .num_resources = ARRAY_SIZE(edb7211_flash_resources), + .dev = { + .platform_data = &edb7211_flash_pdata, + }, +}; + +static void edb7211_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + if (power) { + gpio_set_value(EDB7211_LCDEN, 1); + udelay(100); + gpio_set_value(EDB7211_LCD_DC_DC_EN, 1); + } else { + gpio_set_value(EDB7211_LCD_DC_DC_EN, 0); + udelay(100); + gpio_set_value(EDB7211_LCDEN, 0); + } +} + +static struct plat_lcd_data edb7211_lcd_power_pdata = { + .set_power = edb7211_lcd_power_set, +}; + +static void edb7211_lcd_backlight_set_intensity(int intensity) +{ + gpio_set_value(EDB7211_LCDBL, intensity); +} + +static struct generic_bl_info edb7211_lcd_backlight_pdata = { + .name = "lcd-backlight.0", + .default_intensity = 0x01, + .max_intensity = 0x01, + .set_bl_intensity = edb7211_lcd_backlight_set_intensity, +}; + +static struct gpio edb7211_gpios[] __initconst = { + { EDB7211_LCD_DC_DC_EN, GPIOF_OUT_INIT_LOW, "LCD DC-DC" }, + { EDB7211_LCDEN, GPIOF_OUT_INIT_LOW, "LCD POWER" }, + { EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" }, +}; + +static struct map_desc edb7211_io_desc[] __initdata = { + { /* Memory-mapped extra keyboard row */ + .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD), + .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), + .length = SZ_1M, + .type = MT_DEVICE, + }, +}; + +void __init edb7211_map_io(void) +{ + clps711x_map_io(); + iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc)); +} + +/* Reserve screen memory region at the start of main system memory. */ +static void __init edb7211_reserve(void) +{ + memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE); +} + +static void __init +fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) +{ + /* + * Bank start addresses are not present in the information + * passed in from the boot loader. We could potentially + * detect them, but instead we hard-code them. + * + * Banks sizes _are_ present in the param block, but we're + * not using that information yet. + */ + mi->bank[0].start = 0xc0000000; + mi->bank[0].size = SZ_8M; + mi->bank[1].start = 0xc1000000; + mi->bank[1].size = SZ_8M; + mi->nr_banks = 2; +} + +static void __init edb7211_init(void) +{ + gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios)); + + platform_device_register(&edb7211_flash_pdev); + platform_device_register_data(&platform_bus, "platform-lcd", 0, + &edb7211_lcd_power_pdata, + sizeof(edb7211_lcd_power_pdata)); + platform_device_register_data(&platform_bus, "generic-bl", 0, + &edb7211_lcd_backlight_pdata, + sizeof(edb7211_lcd_backlight_pdata)); + platform_device_register_simple("video-clps711x", 0, NULL, 0); + platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, + ARRAY_SIZE(edb7211_cs8900_resource)); +} + +MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") + /* Maintainer: Jon McClintock */ + .atag_offset = VIDEORAM_SIZE + 0x100, + .nr_irqs = CLPS711X_NR_IRQS, + .fixup = fixup_edb7211, + .reserve = edb7211_reserve, + .map_io = edb7211_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .init_machine = edb7211_init, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c index 3a3f0b702cb4..7d0125580366 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/board-fortunet.c @@ -74,9 +74,11 @@ fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) MACHINE_START(FORTUNET, "ARM-FortuNet") /* Maintainer: FortuNet Inc. */ + .nr_irqs = CLPS711X_NR_IRQS, .fixup = fortunet_fixup, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c new file mode 100644 index 000000000000..1518fc83babd --- /dev/null +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -0,0 +1,232 @@ +/* + * linux/arch/arm/mach-clps711x/p720t.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/leds.h> +#include <linux/sizes.h> +#include <linux/backlight.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand-gpio.h> + +#include <mach/hardware.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/syspld.h> + +#include <video/platform_lcd.h> + +#include "common.h" + +#define P720T_USERLED CLPS711X_GPIO(3, 0) +#define P720T_NAND_CLE CLPS711X_GPIO(4, 0) +#define P720T_NAND_ALE CLPS711X_GPIO(4, 1) +#define P720T_NAND_NCE CLPS711X_GPIO(4, 2) + +#define P720T_NAND_BASE (CLPS711X_SDRAM1_BASE) + +static struct resource p720t_nand_resource[] __initdata = { + DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4), +}; + +static struct mtd_partition p720t_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_2M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct gpio_nand_platdata p720t_nand_pdata __initdata = { + .gpio_rdy = -1, + .gpio_nce = P720T_NAND_NCE, + .gpio_ale = P720T_NAND_ALE, + .gpio_cle = P720T_NAND_CLE, + .gpio_nwp = -1, + .chip_delay = 15, + .parts = p720t_nand_parts, + .num_parts = ARRAY_SIZE(p720t_nand_parts), +}; + +static struct platform_device p720t_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = p720t_nand_resource, + .num_resources = ARRAY_SIZE(p720t_nand_resource), + .dev = { + .platform_data = &p720t_nand_pdata, + }, +}; + +static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + if (power) { + PLD_LCDEN = PLD_LCDEN_EN; + PLD_PWR |= PLD_S4_ON | PLD_S2_ON | PLD_S1_ON; + } else { + PLD_PWR &= ~(PLD_S4_ON | PLD_S2_ON | PLD_S1_ON); + PLD_LCDEN = 0; + } +} + +static struct plat_lcd_data p720t_lcd_power_pdata = { + .set_power = p720t_lcd_power_set, +}; + +static void p720t_lcd_backlight_set_intensity(int intensity) +{ + if (intensity) + PLD_PWR |= PLD_S3_ON; + else + PLD_PWR = 0; +} + +static struct generic_bl_info p720t_lcd_backlight_pdata = { + .name = "lcd-backlight.0", + .default_intensity = 0x01, + .max_intensity = 0x01, + .set_bl_intensity = p720t_lcd_backlight_set_intensity, +}; + +/* + * Map the P720T system PLD. It occupies two address spaces: + * 0x10000000 and 0x10400000. We map both regions as one. + */ +static struct map_desc p720t_io_desc[] __initdata = { + { + .virtual = SYSPLD_VIRT_BASE, + .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), + .length = SZ_8M, + .type = MT_DEVICE, + }, +}; + +static void __init +fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) +{ + /* + * Our bootloader doesn't setup any tags (yet). + */ + if (tag->hdr.tag != ATAG_CORE) { + tag->hdr.tag = ATAG_CORE; + tag->hdr.size = tag_size(tag_core); + tag->u.core.flags = 0; + tag->u.core.pagesize = PAGE_SIZE; + tag->u.core.rootdev = 0x0100; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_MEM; + tag->hdr.size = tag_size(tag_mem32); + tag->u.mem.size = 4096; + tag->u.mem.start = PHYS_OFFSET; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_NONE; + tag->hdr.size = 0; + } +} + +static void __init p720t_map_io(void) +{ + clps711x_map_io(); + iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); +} + +static void __init p720t_init_early(void) +{ + /* + * Power down as much as possible in case we don't + * have the drivers loaded. + */ + PLD_LCDEN = 0; + PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); + + PLD_KBD = 0; + PLD_IO = 0; + PLD_IRDA = 0; + PLD_CODEC = 0; + PLD_TCH = 0; + PLD_SPI = 0; + if (!IS_ENABLED(CONFIG_DEBUG_LL)) { + PLD_COM2 = 0; + PLD_COM1 = 0; + } +} + +static struct gpio_led p720t_gpio_leds[] = { + { + .name = "User LED", + .default_trigger = "heartbeat", + .gpio = P720T_USERLED, + }, +}; + +static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = { + .leds = p720t_gpio_leds, + .num_leds = ARRAY_SIZE(p720t_gpio_leds), +}; + +static void __init p720t_init(void) +{ + platform_device_register(&p720t_nand_pdev); + platform_device_register_data(&platform_bus, "platform-lcd", 0, + &p720t_lcd_power_pdata, + sizeof(p720t_lcd_power_pdata)); + platform_device_register_data(&platform_bus, "generic-bl", 0, + &p720t_lcd_backlight_pdata, + sizeof(p720t_lcd_backlight_pdata)); + platform_device_register_simple("video-clps711x", 0, NULL, 0); +} + +static void __init p720t_init_late(void) +{ + platform_device_register_data(&platform_bus, "leds-gpio", 0, + &p720t_gpio_led_pdata, + sizeof(p720t_gpio_led_pdata)); +} + +MACHINE_START(P720T, "ARM-Prospector720T") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .atag_offset = 0x100, + .nr_irqs = CLPS711X_NR_IRQS, + .fixup = fixup_p720t, + .map_io = p720t_map_io, + .init_early = p720t_init_early, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .init_machine = p720t_init, + .init_late = p720t_init_late, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c deleted file mode 100644 index c314f49d6ef6..000000000000 --- a/arch/arm/mach-clps711x/cdb89712.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/cdb89712.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" - -/* - * Map the CS89712 Ethernet port. That should be moved to the - * ethernet driver, perhaps. - */ -static struct map_desc cdb89712_io_desc[] __initdata = { - { - .virtual = ETHER_BASE, - .pfn =__phys_to_pfn(ETHER_START), - .length = ETHER_SIZE, - .type = MT_DEVICE - } -}; - -static void __init cdb89712_map_io(void) -{ - clps711x_map_io(); - iotable_init(cdb89712_io_desc, ARRAY_SIZE(cdb89712_io_desc)); -} - -MACHINE_START(CDB89712, "Cirrus-CDB89712") - /* Maintainer: Ray Lehtiniemi */ - .atag_offset = 0x100, - .map_io = cdb89712_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 509243d89a32..e046439573ee 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -21,13 +21,16 @@ */ #include <linux/io.h> #include <linux/init.h> +#include <linux/sizes.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clockchips.h> #include <linux/clk-provider.h> -#include <asm/sizes.h> +#include <asm/exception.h> +#include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/system_misc.h> @@ -36,7 +39,6 @@ static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, *clk_tint, *clk_spi; -static unsigned long latch; /* * This maps the generic CLPS711x registers @@ -45,7 +47,7 @@ static struct map_desc clps711x_io_desc[] __initdata = { { .virtual = (unsigned long)CLPS711X_VIRT_BASE, .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), - .length = SZ_1M, + .length = SZ_64K, .type = MT_DEVICE } }; @@ -64,7 +66,7 @@ static void int1_mask(struct irq_data *d) clps_writel(intmr1, INTMR1); } -static void int1_ack(struct irq_data *d) +static void int1_eoi(struct irq_data *d) { switch (d->irq) { case IRQ_CSINT: clps_writel(0, COEOI); break; @@ -86,7 +88,8 @@ static void int1_unmask(struct irq_data *d) } static struct irq_chip int1_chip = { - .irq_ack = int1_ack, + .name = "Interrupt Vector 1", + .irq_eoi = int1_eoi, .irq_mask = int1_mask, .irq_unmask = int1_unmask, }; @@ -100,7 +103,7 @@ static void int2_mask(struct irq_data *d) clps_writel(intmr2, INTMR2); } -static void int2_ack(struct irq_data *d) +static void int2_eoi(struct irq_data *d) { switch (d->irq) { case IRQ_KBDINT: clps_writel(0, KBDEOI); break; @@ -117,73 +120,160 @@ static void int2_unmask(struct irq_data *d) } static struct irq_chip int2_chip = { - .irq_ack = int2_ack, + .name = "Interrupt Vector 2", + .irq_eoi = int2_eoi, .irq_mask = int2_mask, .irq_unmask = int2_unmask, }; +static void int3_mask(struct irq_data *d) +{ + u32 intmr3; + + intmr3 = clps_readl(INTMR3); + intmr3 &= ~(1 << (d->irq - 32)); + clps_writel(intmr3, INTMR3); +} + +static void int3_unmask(struct irq_data *d) +{ + u32 intmr3; + + intmr3 = clps_readl(INTMR3); + intmr3 |= 1 << (d->irq - 32); + clps_writel(intmr3, INTMR3); +} + +static struct irq_chip int3_chip = { + .name = "Interrupt Vector 3", + .irq_mask = int3_mask, + .irq_unmask = int3_unmask, +}; + +static struct { + int nr; + struct irq_chip *chip; + irq_flow_handler_t handle; +} clps711x_irqdescs[] __initdata = { + { IRQ_CSINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_EINT1, &int1_chip, handle_level_irq, }, + { IRQ_EINT2, &int1_chip, handle_level_irq, }, + { IRQ_EINT3, &int1_chip, handle_level_irq, }, + { IRQ_TC1OI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_TC2OI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_RTCMI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_TINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_UTXINT1, &int1_chip, handle_level_irq, }, + { IRQ_URXINT1, &int1_chip, handle_level_irq, }, + { IRQ_UMSINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_SSEOTI, &int1_chip, handle_level_irq, }, + { IRQ_KBDINT, &int2_chip, handle_fasteoi_irq, }, + { IRQ_SS2RX, &int2_chip, handle_level_irq, }, + { IRQ_SS2TX, &int2_chip, handle_level_irq, }, + { IRQ_UTXINT2, &int2_chip, handle_level_irq, }, + { IRQ_URXINT2, &int2_chip, handle_level_irq, }, +}; + void __init clps711x_init_irq(void) { unsigned int i; - for (i = 0; i < NR_IRQS; i++) { - if (INT1_IRQS & (1 << i)) { - irq_set_chip_and_handler(i, &int1_chip, - handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - if (INT2_IRQS & (1 << i)) { - irq_set_chip_and_handler(i, &int2_chip, - handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } - - /* - * Disable interrupts - */ + /* Disable interrupts */ clps_writel(0, INTMR1); clps_writel(0, INTMR2); + clps_writel(0, INTMR3); - /* - * Clear down any pending interrupts - */ + /* Clear down any pending interrupts */ + clps_writel(0, BLEOI); + clps_writel(0, MCEOI); clps_writel(0, COEOI); clps_writel(0, TC1EOI); clps_writel(0, TC2EOI); clps_writel(0, RTCEOI); clps_writel(0, TEOI); clps_writel(0, UMSEOI); - clps_writel(0, SYNCIO); clps_writel(0, KBDEOI); + clps_writel(0, SRXEOF); + clps_writel(0xffffffff, DAISR); + + for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) { + irq_set_chip_and_handler(clps711x_irqdescs[i].nr, + clps711x_irqdescs[i].chip, + clps711x_irqdescs[i].handle); + set_irq_flags(clps711x_irqdescs[i].nr, + IRQF_VALID | IRQF_PROBE); + } + + if (IS_ENABLED(CONFIG_FIQ)) { + init_FIQ(0); + irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip, + handle_bad_irq); + set_irq_flags(IRQ_DAIINT, + IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); + } } -/* - * gettimeoffset() returns time since last timer tick, in usecs. - * - * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. - * 'tick' is usecs per jiffy. - */ -static unsigned long clps711x_gettimeoffset(void) +inline u32 fls16(u32 x) { - unsigned long hwticks; - hwticks = latch - (clps_readl(TC2D) & 0xffff); - return (hwticks * (tick_nsec / 1000)) / latch; + u32 r = 15; + + if (!(x & 0xff00)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf000)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc000)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x8000)) + r--; + + return r; } -/* - * IRQ handler for the timer - */ -static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id) +asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs) { - timer_tick(); + u32 irqstat; + void __iomem *base = CLPS711X_VIRT_BASE; + + irqstat = readl_relaxed(base + INTSR1) & readl_relaxed(base + INTMR1); + if (irqstat) { + handle_IRQ(fls16(irqstat), regs); + return; + } + + irqstat = readl_relaxed(base + INTSR2) & readl_relaxed(base + INTMR2); + if (likely(irqstat)) + handle_IRQ(fls16(irqstat) + 16, regs); +} + +static void clps711x_clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ +} + +static struct clock_event_device clockevent_clps711x = { + .name = "CLPS711x Clockevents", + .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = clps711x_clockevent_set_mode, +}; + +static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) +{ + clockevent_clps711x.event_handler(&clockevent_clps711x); + return IRQ_HANDLED; } static struct irqaction clps711x_timer_irq = { .name = "CLPS711x Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = p720t_timer_interrupt, + .handler = clps711x_timer_interrupt, }; static void add_fixed_clk(struct clk *clk, const char *name, int rate) @@ -244,20 +334,19 @@ static void __init clps711x_timer_init(void) pr_info("CPU frequency set at %i Hz.\n", cpu); - latch = (timh + HZ / 2) / HZ; + clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D); tmp = clps_readl(SYSCON1); tmp |= SYSCON1_TC2S | SYSCON1_TC2M; clps_writel(tmp, SYSCON1); - clps_writel(latch - 1, TC2D); + clockevents_config_and_register(&clockevent_clps711x, timh, 1, 0xffff); setup_irq(IRQ_TC2OI, &clps711x_timer_irq); } struct sys_timer clps711x_timer = { .init = clps711x_timer_init, - .offset = clps711x_gettimeoffset, }; void clps711x_restart(char mode, const char *cmd) diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index fc0f0650dcb5..b7c0c75c90c0 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -4,9 +4,14 @@ * Common bits. */ +#define CLPS711X_NR_IRQS (33) +#define CLPS711X_NR_GPIO (4 * 8 + 3) +#define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) + struct sys_timer; extern void clps711x_map_io(void); extern void clps711x_init_irq(void); -extern struct sys_timer clps711x_timer; +extern void clps711x_handle_irq(struct pt_regs *regs); extern void clps711x_restart(char mode, const char *cmd); +extern struct sys_timer clps711x_timer; diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c deleted file mode 100644 index 5fad0b4f40ad..000000000000 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/arch-edb7211.c - * - * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/memblock.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" - -extern void edb7211_map_io(void); - -/* Reserve screen memory region at the start of main system memory. */ -static void __init edb7211_reserve(void) -{ - memblock_reserve(PHYS_OFFSET, 0x00020000); -} - -static void __init -fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) -{ - /* - * Bank start addresses are not present in the information - * passed in from the boot loader. We could potentially - * detect them, but instead we hard-code them. - * - * Banks sizes _are_ present in the param block, but we're - * not using that information yet. - */ - mi->bank[0].start = 0xc0000000; - mi->bank[0].size = 8*1024*1024; - mi->bank[1].start = 0xc1000000; - mi->bank[1].size = 8*1024*1024; - mi->nr_banks = 2; -} - -MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") - /* Maintainer: Jon McClintock */ - .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */ - .fixup = fixup_edb7211, - .map_io = edb7211_map_io, - .reserve = edb7211_reserve, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c deleted file mode 100644 index 4372f06c9929..000000000000 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/mm.c - * - * Extra MM routines for the EDB7211 board - * - * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/bug.h> - -#include <mach/hardware.h> -#include <asm/page.h> -#include <asm/sizes.h> - -#include <asm/mach/map.h> - -extern void clps711x_map_io(void); - -/* - * The on-chip registers are given a size of 1MB so that a section can - * be used to map them; this saves a page table. This is the place to - * add mappings for ROM, expansion memory, PCMCIA, etc. (if static - * mappings are chosen for those areas). - * - * Here is a physical memory map (to be fleshed out later): - * - * Physical Address Size Description - * ----------------- ----- --------------------------------- - * c0000000-c001ffff 128KB reserved for video RAM [1] - * c0020000-c0023fff 16KB parameters (see Documentation/arm/Setup) - * c0024000-c0027fff 16KB swapper_pg_dir (task 0 page directory) - * c0028000-... kernel image (TEXTADDR) - * - * [1] Unused pages should be given back to the VM; they are not yet. - * The parameter block should also be released (not sure if this - * happens). - */ -static struct map_desc edb7211_io_desc[] __initdata = { - { /* memory-mapped extra keyboard row */ - .virtual = EP7211_VIRT_EXTKBD, - .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), - .length = SZ_1M, - .type = MT_DEVICE, - }, { /* and CS8900A Ethernet chip */ - .virtual = EP7211_VIRT_CS8900A, - .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), - .length = SZ_1M, - .type = MT_DEVICE, - }, { /* flash banks */ - .virtual = EP7211_VIRT_FLASH1, - .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), - .length = SZ_8M, - .type = MT_DEVICE, - }, { - .virtual = EP7211_VIRT_FLASH2, - .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), - .length = SZ_8M, - .type = MT_DEVICE, - } -}; - -void __init edb7211_map_io(void) -{ - clps711x_map_io(); - iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc)); -} - diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h index 1588a365f610..0452f5f3f034 100644 --- a/arch/arm/mach-clps711x/include/mach/autcpu12.h +++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h @@ -21,24 +21,15 @@ #define __ASM_ARCH_AUTCPU12_H /* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - */ -#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* physical */ -#define AUTCPU12_VIRT_CS8900A (0xfe000000) /* virtual */ - -/* * The flash bank is wired to chip select 0 */ #define AUTCPU12_PHYS_FLASH CS0_PHYS_BASE /* physical */ /* offset for device specific information structure */ #define AUTCPU12_LCDINFO_OFFS (0x00010000) -/* -* Videomemory is the internal SRAM (CS 6) -*/ + +/* Videomemory in the internal SRAM (CS 6) */ #define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE -#define AUTCPU12_VIRT_VIDEO (0xfd000000) /* * All special IO's are tied to CS1 @@ -49,8 +40,6 @@ #define AUTCPU12_PHYS_CSAUX1 CS1_PHYS_BASE +0x04000000 /* physical */ -#define AUTCPU12_PHYS_SMC CS1_PHYS_BASE +0x06000000 /* physical */ - #define AUTCPU12_PHYS_CAN CS1_PHYS_BASE +0x08000000 /* physical */ #define AUTCPU12_PHYS_TOUCH CS1_PHYS_BASE +0x0A000000 /* physical */ @@ -59,14 +48,6 @@ #define AUTCPU12_PHYS_LPT CS1_PHYS_BASE +0x0E000000 /* physical */ -/* -* defines for smartmedia card access -*/ -#define AUTCPU12_SMC_RDY (1<<2) -#define AUTCPU12_SMC_ALE (1<<3) -#define AUTCPU12_SMC_CLE (1<<4) -#define AUTCPU12_SMC_PORT_OFFSET PBDR -#define AUTCPU12_SMC_SELECT_OFFSET 0x10 /* * defines for lcd contrast */ diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h index c82e21ca49c7..01d1b9559710 100644 --- a/arch/arm/mach-clps711x/include/mach/clps711x.h +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -257,6 +257,9 @@ #define MEMCFG_BUS_WIDTH_16 (0) #define MEMCFG_BUS_WIDTH_8 (3) +#define MEMCFG_SQAEN (1 << 6) +#define MEMCFG_CLKENB (1 << 7) + #define MEMCFG_WAITSTATE_8_3 (0 << 2) #define MEMCFG_WAITSTATE_7_3 (1 << 2) #define MEMCFG_WAITSTATE_6_3 (2 << 2) @@ -274,4 +277,28 @@ #define MEMCFG_WAITSTATE_2_0 (14 << 2) #define MEMCFG_WAITSTATE_1_0 (15 << 2) +/* INTSR1 Interrupts */ +#define IRQ_CSINT (4) +#define IRQ_EINT1 (5) +#define IRQ_EINT2 (6) +#define IRQ_EINT3 (7) +#define IRQ_TC1OI (8) +#define IRQ_TC2OI (9) +#define IRQ_RTCMI (10) +#define IRQ_TINT (11) +#define IRQ_UTXINT1 (12) +#define IRQ_URXINT1 (13) +#define IRQ_UMSINT (14) +#define IRQ_SSEOTI (15) + +/* INTSR2 Interrupts */ +#define IRQ_KBDINT (16 + 0) +#define IRQ_SS2RX (16 + 1) +#define IRQ_SS2TX (16 + 2) +#define IRQ_UTXINT2 (16 + 12) +#define IRQ_URXINT2 (16 + 13) + +/* INTSR3 Interrupts */ +#define IRQ_DAIINT (32 + 0) + #endif /* __MACH_CLPS711X_H */ diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S deleted file mode 100644 index 56e5c2c23504..000000000000 --- a/arch/arm/mach-clps711x/include/mach/entry-macro.S +++ /dev/null @@ -1,51 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for CLPS711X-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/hardware.h> - - .macro get_irqnr_preamble, base, tmp - .endm - -#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1) -#error INTSR stride != INTMR stride -#endif - - .macro get_irqnr_and_base, irqnr, stat, base, mask - mov \base, #CLPS711X_VIRT_BASE - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #4 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - movs \stat, \stat, lsr #4 - bne 1001f - - add \base, \base, #INTSR2 - INTSR1 - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #16 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - -1001: tst \stat, #255 - addeq \irqnr, \irqnr, #8 - moveq \stat, \stat, lsr #8 - tst \stat, #15 - addeq \irqnr, \irqnr, #4 - moveq \stat, \stat, lsr #4 - tst \stat, #3 - addeq \irqnr, \irqnr, #2 - moveq \stat, \stat, lsr #2 - tst \stat, #1 - addeq \irqnr, \irqnr, #1 - moveq \stat, \stat, lsr #1 - tst \stat, #1 @ bit 0 should be set - .endm - - diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 8497775d6ee5..2f23dd5d73e4 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -24,7 +24,10 @@ #include <mach/clps711x.h> -#define CLPS711X_VIRT_BASE IOMEM(0xff000000) +#define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \ + (((x) >> 2) & 0x3c000000))) + +#define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE)) #ifndef __ASSEMBLY__ #define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) @@ -61,67 +64,17 @@ #define CS7_PHYS_BASE (0x00000000) #endif -#define SYSPLD_VIRT_BASE 0xfe000000 -#define SYSPLD_BASE SYSPLD_VIRT_BASE - -#if defined (CONFIG_ARCH_CDB89712) - -#define ETHER_START 0x20000000 -#define ETHER_SIZE 0x1000 -#define ETHER_BASE 0xfe000000 - -#endif +#define CLPS711X_SRAM_BASE CS6_PHYS_BASE +#define CLPS711X_SRAM_SIZE (48 * 1024) +#define CLPS711X_SDRAM0_BASE (0xc0000000) +#define CLPS711X_SDRAM1_BASE (0xd0000000) #if defined (CONFIG_ARCH_EDB7211) -/* - * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) - * and repeat across it. This is the mapping for it. - * - * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */ - -#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */ - - -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - * - * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */ - -#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */ - - -/* - * The two flash banks are wired to chip selects 0 and 1. This is the mapping - * for them. - * - * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running - * in jumpered boot mode. - */ -#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */ -#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */ - -#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */ -#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */ +/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */ +#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE #endif /* CONFIG_ARCH_EDB7211 */ -/* - * Relevant bits in port D, which controls power to the various parts of - * the LCD on the EDB7211. - */ -#define EDB_PD1_LCD_DC_DC_EN (1<<1) -#define EDB_PD2_LCDEN (1<<2) -#define EDB_PD3_LCDBL (1<<3) - #endif diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h deleted file mode 100644 index 14d215f8ca81..000000000000 --- a/arch/arm/mach-clps711x/include/mach/irqs.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/irqs.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Interrupts from INTSR1 - */ -#define IRQ_CSINT 4 -#define IRQ_EINT1 5 -#define IRQ_EINT2 6 -#define IRQ_EINT3 7 -#define IRQ_TC1OI 8 -#define IRQ_TC2OI 9 -#define IRQ_RTCMI 10 -#define IRQ_TINT 11 -#define IRQ_UTXINT1 12 -#define IRQ_URXINT1 13 -#define IRQ_UMSINT 14 -#define IRQ_SSEOTI 15 - -#define INT1_IRQS (0x0000fff0) - -/* - * Interrupts from INTSR2 - */ -#define IRQ_KBDINT (16+0) /* bit 0 */ -#define IRQ_SS2RX (16+1) /* bit 1 */ -#define IRQ_SS2TX (16+2) /* bit 2 */ -#define IRQ_UTXINT2 (16+12) /* bit 12 */ -#define IRQ_URXINT2 (16+13) /* bit 13 */ - -#define INT2_IRQS (0x30070000) - -#define NR_IRQS 30 diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h index f7f4c1201898..9a433155bf58 100644 --- a/arch/arm/mach-clps711x/include/mach/syspld.h +++ b/arch/arm/mach-clps711x/include/mach/syspld.h @@ -23,14 +23,9 @@ #define __ASM_ARCH_SYSPLD_H #define SYSPLD_PHYS_BASE (0x10000000) +#define SYSPLD_VIRT_BASE IO_ADDRESS(SYSPLD_PHYS_BASE) -#ifndef __ASSEMBLY__ -#include <asm/types.h> - -#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off)) -#else -#define SYSPLD_REG(type,off) (off) -#endif +#define SYSPLD_REG(type, off) (*(volatile type *)(SYSPLD_VIRT_BASE + (off))) #define PLD_INT SYSPLD_REG(u32, 0x000000) #define PLD_INT_PENIRQ (1 << 5) diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c deleted file mode 100644 index b752b586fc2f..000000000000 --- a/arch/arm/mach-clps711x/p720t.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/p720t.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/leds.h> - -#include <mach/hardware.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/sizes.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/syspld.h> - -#include <asm/hardware/clps7111.h> - -#include "common.h" - -/* - * Map the P720T system PLD. It occupies two address spaces: - * SYSPLD_PHYS_BASE and SYSPLD_PHYS_BASE + 0x00400000 - * We map both here. - */ -static struct map_desc p720t_io_desc[] __initdata = { - { - .virtual = SYSPLD_VIRT_BASE, - .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), - .length = SZ_1M, - .type = MT_DEVICE - }, { - .virtual = 0xfe400000, - .pfn = __phys_to_pfn(0x10400000), - .length = SZ_1M, - .type = MT_DEVICE - } -}; - -static void __init -fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) -{ - /* - * Our bootloader doesn't setup any tags (yet). - */ - if (tag->hdr.tag != ATAG_CORE) { - tag->hdr.tag = ATAG_CORE; - tag->hdr.size = tag_size(tag_core); - tag->u.core.flags = 0; - tag->u.core.pagesize = PAGE_SIZE; - tag->u.core.rootdev = 0x0100; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_MEM; - tag->hdr.size = tag_size(tag_mem32); - tag->u.mem.size = 4096; - tag->u.mem.start = PHYS_OFFSET; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_NONE; - tag->hdr.size = 0; - } -} - -static void __init p720t_map_io(void) -{ - clps711x_map_io(); - iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); -} - -static void __init p720t_init_early(void) -{ - /* - * Power down as much as possible in case we don't - * have the drivers loaded. - */ - PLD_LCDEN = 0; - PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); - - PLD_KBD = 0; - PLD_IO = 0; - PLD_IRDA = 0; - PLD_CODEC = 0; - PLD_TCH = 0; - PLD_SPI = 0; - if (!IS_ENABLED(CONFIG_DEBUG_LL)) { - PLD_COM2 = 0; - PLD_COM1 = 0; - } -} - -/* - * LED controled by CPLD - */ -#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) -static void p720t_led_set(struct led_classdev *cdev, - enum led_brightness b) -{ - u8 reg = clps_readb(PDDR); - - if (b != LED_OFF) - reg |= 0x1; - else - reg &= ~0x1; - - clps_writeb(reg, PDDR); -} - -static enum led_brightness p720t_led_get(struct led_classdev *cdev) -{ - u8 reg = clps_readb(PDDR); - - return (reg & 0x1) ? LED_FULL : LED_OFF; -} - -static int __init p720t_leds_init(void) -{ - - struct led_classdev *cdev; - int ret; - - if (!machine_is_p720t()) - return -ENODEV; - - cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); - if (!cdev) - return -ENOMEM; - - cdev->name = "p720t:0"; - cdev->brightness_set = p720t_led_set; - cdev->brightness_get = p720t_led_get; - cdev->default_trigger = "heartbeat"; - - ret = led_classdev_register(NULL, cdev); - if (ret < 0) { - kfree(cdev); - return ret; - } - - return 0; -} - -/* - * Since we may have triggers on any subsystem, defer registration - * until after subsystem_init. - */ -fs_initcall(p720t_leds_init); -#endif - -MACHINE_START(P720T, "ARM-Prospector720T") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .fixup = fixup_p720t, - .init_early = p720t_init_early, - .map_io = p720t_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 29b13f249aa9..9ebfcc46feb1 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -3,7 +3,6 @@ menu "CNS3XXX platform type" config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" - select MIGHT_HAVE_PCI help Include support for the Cavium Networks CNS3420 MPCore Platform Baseboard. diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 2c5fb4c7e509..ae305397003c 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -24,6 +24,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/hardware/gic.h> @@ -32,6 +34,7 @@ #include <asm/mach/time.h> #include <mach/cns3xxx.h> #include <mach/irqs.h> +#include <mach/pm.h> #include "core.h" #include "devices.h" @@ -125,13 +128,52 @@ static struct resource cns3xxx_usb_ehci_resources[] = { static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32); +static int csn3xxx_usb_power_on(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + * + * Set USB AHB INCR length to 16 + */ + if (atomic_inc_return(&usb_pwr_ref) == 1) { + cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); + cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); + cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); + __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), + MISC_CHIP_CONFIG_REG); + } + + return 0; +} + +static void csn3xxx_usb_power_off(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + */ + if (atomic_dec_return(&usb_pwr_ref) == 0) + cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); +} + +static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = { + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + static struct platform_device cns3xxx_usb_ehci_device = { - .name = "cns3xxx-ehci", + .name = "ehci-platform", .num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources), .resource = cns3xxx_usb_ehci_resources, .dev = { .dma_mask = &cns3xxx_usb_ehci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cns3xxx_usb_ehci_pdata, }, }; @@ -149,13 +191,20 @@ static struct resource cns3xxx_usb_ohci_resources[] = { static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32); +static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = { + .num_ports = 1, + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + static struct platform_device cns3xxx_usb_ohci_device = { - .name = "cns3xxx-ohci", + .name = "ohci-platform", .num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources), .resource = cns3xxx_usb_ohci_resources, .dev = { .dma_mask = &cns3xxx_usb_ohci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cns3xxx_usb_ohci_pdata, }, }; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 32ee3f895967..d4f4dbfc0e59 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -11,39 +11,40 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> -#include <linux/init.h> #include <linux/console.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/init.h> +#include <linux/kernel.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/i2c/pca953x.h> #include <linux/input.h> +#include <linux/input/tps6507x-ts.h> #include <linux/mfd/tps6507x.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> -#include <linux/input/tps6507x-ts.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/delay.h> #include <linux/wl12xx.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/system_info.h> - #include <mach/cp_intc.h> #include <mach/da8xx.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/spi-davinci.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/system_info.h> #include <media/tvp514x.h> #include <media/adv7343.h> @@ -1516,6 +1517,11 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", ret); + ret = da8xx_register_uio_pruss(); + if (ret) + pr_warn("da850_evm_init: pruss initialization failed: %d\n", + ret); + /* Handle board specific muxing for LCD here */ ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); if (ret) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index a84dfcbc1154..f5e018de7fa5 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -519,13 +519,11 @@ static int dm6444evm_msp430_get_pins(void) char buf[4]; struct i2c_msg msg[2] = { { - .addr = dm6446evm_msp->addr, .flags = 0, .len = 2, .buf = (void __force *)txbuf, }, { - .addr = dm6446evm_msp->addr, .flags = I2C_M_RD, .len = 4, .buf = buf, @@ -536,6 +534,9 @@ static int dm6444evm_msp430_get_pins(void) if (!dm6446evm_msp) return -ENXIO; + msg[0].addr = dm6446evm_msp->addr; + msg[1].addr = dm6446evm_msp->addr; + /* Command 4 == get input state, returns port 2 and port3 data * S Addr W [A] len=2 [A] cmd=4 [A] * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 29b17f7d3a5f..773ab07a71a0 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -374,7 +374,7 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) * complete sample conversion in time. */ tsc_clk = clk_get(NULL, "sys_tsc_clk"); - if (tsc_clk) { + if (!IS_ERR(tsc_clk)) { error = clk_set_rate(tsc_clk, 5000000); WARN_ON(error < 0); clk_put(tsc_clk); diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 2d9d921e8b01..62ad300440f5 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -38,7 +38,7 @@ #ifndef __ASSEMBLY__ struct davinci_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ + /* Bit field of UARTs present; bit 0 --> UART0 */ unsigned int enabled_uarts; }; diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 18cfd4977155..3a0ff905a69b 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -32,6 +32,9 @@ u32 *uart; /* PORT_16C550A, in polled non-fifo mode */ static void putc(char c) { + if (!uart) + return; + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); uart[UART_TX] = c; @@ -39,6 +42,9 @@ static void putc(char c) static inline void flush(void) { + if (!uart) + return; + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 7bcd0dfce4b1..b47f75038686 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -63,7 +63,7 @@ static inline int pmu_to_irq(int pin) static inline int irq_to_pmu(int irq) { - if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS) + if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS) return irq - IRQ_DOVE_PMU_START; return -EINVAL; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 087711524e8a..bc4344aa1009 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -46,8 +46,20 @@ static void pmu_irq_ack(struct irq_data *d) int pin = irq_to_pmu(d->irq); u32 u; + /* + * The PMU mask register is not RW0C: it is RW. This means that + * the bits take whatever value is written to them; if you write + * a '1', you will set the interrupt. + * + * Unfortunately this means there is NO race free way to clear + * these interrupts. + * + * So, let's structure the code so that the window is as small as + * possible. + */ u = ~(1 << (pin & 31)); - writel(u, PMU_INTERRUPT_CAUSE); + u &= readl_relaxed(PMU_INTERRUPT_CAUSE); + writel_relaxed(u, PMU_INTERRUPT_CAUSE); } static struct irq_chip pmu_irq_chip = { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index bb3b09aa9183..91d5b6f1d5af 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -68,6 +68,15 @@ config SOC_EXYNOS5250 help Enable EXYNOS5250 SoC support +config SOC_EXYNOS5440 + bool "SAMSUNG EXYNOS5440" + default y + depends on ARCH_EXYNOS5 + select ARM_ARCH_TIMER + select AUTO_ZRELADDR + help + Enable EXYNOS5440 SoC support + config EXYNOS4_MCT bool default y @@ -99,11 +108,6 @@ config EXYNOS_DEV_SYSMMU help Common setup code for SYSTEM MMU in EXYNOS platforms -config EXYNOS4_DEV_DWMCI - bool - help - Compile in platform device definitions for DWMCI - config EXYNOS4_DEV_USB_OHCI bool help @@ -418,9 +422,9 @@ config MACH_EXYNOS4_DT config MACH_EXYNOS5_DT bool "SAMSUNG EXYNOS5 Machine using device tree" + default y depends on ARCH_EXYNOS5 select ARM_AMBA - select SOC_EXYNOS5250 select USE_OF help Machine support for Samsung EXYNOS5 machine with device tree enabled. diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 1797dee88a0d..b189881657ec 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -14,9 +14,9 @@ obj- := obj-$(CONFIG_ARCH_EXYNOS) += common.o obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o -obj-$(CONFIG_ARCH_EXYNOS5) += clock-exynos5.o obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o +obj-$(CONFIG_SOC_EXYNOS5250) += clock-exynos5.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o @@ -50,7 +50,6 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o obj-y += dev-uart.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o -obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 454bc6ed9a8d..ddd4b72c6f9a 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -18,6 +18,7 @@ #include <linux/sched.h> #include <linux/serial_core.h> #include <linux/of.h> +#include <linux/of_fdt.h> #include <linux/of_irq.h> #include <linux/export.h> #include <linux/irqdomain.h> @@ -58,9 +59,11 @@ static const char name_exynos4210[] = "EXYNOS4210"; static const char name_exynos4212[] = "EXYNOS4212"; static const char name_exynos4412[] = "EXYNOS4412"; static const char name_exynos5250[] = "EXYNOS5250"; +static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); static void exynos5_map_io(void); +static void exynos5440_map_io(void); static void exynos4_init_clocks(int xtal); static void exynos5_init_clocks(int xtal); static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); @@ -98,6 +101,12 @@ static struct cpu_table cpu_ids[] __initdata = { .init_clocks = exynos5_init_clocks, .init = exynos_init, .name = name_exynos5250, + }, { + .idcode = EXYNOS5440_SOC_ID, + .idmask = EXYNOS5_SOC_MASK, + .map_io = exynos5440_map_io, + .init = exynos_init, + .name = name_exynos5440, }, }; @@ -112,6 +121,17 @@ static struct map_desc exynos_iodesc[] __initdata = { }, }; +#ifdef CONFIG_ARCH_EXYNOS5 +static struct map_desc exynos5440_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(EXYNOS5440_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; +#endif + static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -263,6 +283,15 @@ static struct map_desc exynos5_iodesc[] __initdata = { }, }; +static struct map_desc exynos5440_iodesc0[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(EXYNOS5440_PA_UART0), + .length = SZ_512K, + .type = MT_DEVICE, + }, +}; + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -270,11 +299,29 @@ void exynos4_restart(char mode, const char *cmd) void exynos5_restart(char mode, const char *cmd) { - __raw_writel(0x1, EXYNOS_SWRESET); + u32 val; + void __iomem *addr; + + if (of_machine_is_compatible("samsung,exynos5250")) { + val = 0x1; + addr = EXYNOS_SWRESET; + } else if (of_machine_is_compatible("samsung,exynos5440")) { + val = (0x10 << 20) | (0x1 << 16); + addr = EXYNOS5440_SWRESET; + } else { + pr_err("%s: cannot support non-DT\n", __func__); + return; + } + + __raw_writel(val, addr); } void __init exynos_init_late(void) { + if (of_machine_is_compatible("samsung,exynos5440")) + /* to be supported later */ + return; + exynos_pm_late_initcall(); } @@ -286,8 +333,20 @@ void __init exynos_init_late(void) void __init exynos_init_io(struct map_desc *mach_desc, int size) { + struct map_desc *iodesc = exynos_iodesc; + int iodesc_sz = ARRAY_SIZE(exynos_iodesc); +#if defined(CONFIG_OF) && defined(CONFIG_ARCH_EXYNOS5) + unsigned long root = of_get_flat_dt_root(); + /* initialize the io descriptors we need for initialization */ - iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); + if (of_flat_dt_is_compatible(root, "samsung,exynos5440")) { + iodesc = exynos5440_iodesc; + iodesc_sz = ARRAY_SIZE(exynos5440_iodesc); + } +#endif + + iotable_init(iodesc, iodesc_sz); + if (mach_desc) iotable_init(mach_desc, size); @@ -356,6 +415,11 @@ static void __init exynos4_init_clocks(int xtal) exynos4_setup_clocks(); } +static void __init exynos5440_map_io(void) +{ + iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); +} + static void __init exynos5_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); @@ -572,8 +636,9 @@ static int __init combiner_of_init(struct device_node *np, return 0; } -static const struct of_device_id exynos4_dt_irq_match[] = { +static const struct of_device_id exynos_dt_irq_match[] = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, { .compatible = "samsung,exynos4210-combiner", .data = combiner_of_init, }, {}, @@ -590,7 +655,7 @@ void __init exynos4_init_irq(void) gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); #ifdef CONFIG_OF else - of_irq_init(exynos4_dt_irq_match); + of_irq_init(exynos_dt_irq_match); #endif if (!of_have_populated_dt()) @@ -607,7 +672,7 @@ void __init exynos4_init_irq(void) void __init exynos5_init_irq(void) { #ifdef CONFIG_OF - of_irq_init(exynos4_dt_irq_match); + of_irq_init(exynos_dt_irq_match); #endif /* * The parameters of s5p_init_irq() are for VIC init. @@ -639,7 +704,7 @@ static int __init exynos4_l2x0_cache_init(void) { int ret; - if (soc_is_exynos5250()) + if (soc_is_exynos5250() || soc_is_exynos5440()) return 0; ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); @@ -973,6 +1038,8 @@ static int __init exynos_init_irq_eint(void) } } #endif + if (soc_is_exynos5440()) + return 0; if (soc_is_exynos5250()) exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K); diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c deleted file mode 100644 index 79035018fb74..000000000000 --- a/arch/arm/mach-exynos/dev-dwmci.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/dev-dwmci.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Platform device for Synopsys DesignWare Mobile Storage IP - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mmc/dw_mmc.h> - -#include <plat/devs.h> - -#include <mach/map.h> - -static int exynos4_dwmci_get_bus_wd(u32 slot_id) -{ - return 4; -} - -static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) -{ - return 0; -} - -static struct resource exynos4_dwmci_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K), - [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI), -}; - -static struct dw_mci_board exynos4_dwci_pdata = { - .num_slots = 1, - .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, - .bus_hz = 80 * 1000 * 1000, - .detect_delay_ms = 200, - .init = exynos4_dwmci_init, - .get_bus_wd = exynos4_dwmci_get_bus_wd, -}; - -static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_dwmci = { - .name = "dw_mmc", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_dwmci_resource), - .resource = exynos4_dwmci_resource, - .dev = { - .dma_mask = &exynos4_dwmci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_dwci_pdata, - }, -}; - -void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd) -{ - struct dw_mci_board *npd; - - npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board), - &exynos4_device_dwmci); - - if (!npd->init) - npd->init = exynos4_dwmci_init; - if (!npd->get_bus_wd) - npd->get_bus_wd = exynos4_dwmci_get_bus_wd; -} diff --git a/arch/arm/mach-exynos/include/mach/dwmci.h b/arch/arm/mach-exynos/include/mach/dwmci.h deleted file mode 100644 index 7ce657459cc0..000000000000 --- a/arch/arm/mach-exynos/include/mach/dwmci.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Synopsys DesignWare Mobile Storage for EXYNOS4210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_DWMCI_H -#define __ASM_ARM_ARCH_DWMCI_H __FILE__ - -#include <linux/mmc/dw_mmc.h> - -extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd); - -#endif /* __ASM_ARM_ARCH_DWMCI_H */ diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 5d44616c2014..1f4dc35cd4b9 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -331,6 +331,11 @@ #define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126) #define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127) +/* EXYNOS5440 */ + +#define EXYNOS5440_IRQ_UART0 IRQ_SPI(2) +#define EXYNOS5440_IRQ_UART1 IRQ_SPI(3) + #define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2) #define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0) diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 9f180aa3a848..1df6abbf53b8 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -53,6 +53,7 @@ #define EXYNOS4_PA_ONENAND_DMA 0x0C600000 #define EXYNOS_PA_CHIPID 0x10000000 +#define EXYNOS5440_PA_CHIPID 0x00160000 #define EXYNOS4_PA_SYSCON 0x10010000 #define EXYNOS5_PA_SYSCON 0x10050100 @@ -283,6 +284,10 @@ #define EXYNOS5_PA_UART2 0x12C20000 #define EXYNOS5_PA_UART3 0x12C30000 +#define EXYNOS5440_PA_UART0 0x000B0000 +#define EXYNOS5440_PA_UART1 0x000C0000 +#define EXYNOS5440_SZ_UART SZ_256 + #define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-mem.h b/arch/arm/mach-exynos/include/mach/regs-mem.h deleted file mode 100644 index 0368b5a27252..000000000000 --- a/arch/arm/mach-exynos/include/mach/regs-mem.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - SROMC and DMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_MEM_H -#define __ASM_ARCH_REGS_MEM_H __FILE__ - -#include <mach/map.h> - -#define S5P_DMC0_MEMCON_OFFSET 0x04 - -#define S5P_DMC0_MEMTYPE_SHIFT 8 -#define S5P_DMC0_MEMTYPE_MASK 0xF - -#endif /* __ASM_ARCH_REGS_MEM_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 70b2795f5283..84428e72cf5e 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -31,6 +31,7 @@ #define S5P_SWRESET S5P_PMUREG(0x0400) #define EXYNOS_SWRESET S5P_PMUREG(0x0400) +#define EXYNOS5440_SWRESET S5P_PMUREG(0x00C4) #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 8858068d2b6a..92757ff817ae 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -77,6 +77,7 @@ static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL), OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU, "exynos-tmu", NULL), {}, diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 25f464cf7979..929de766d490 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -10,6 +10,7 @@ */ #include <linux/of_platform.h> +#include <linux/of_fdt.h> #include <linux/serial_core.h> #include <linux/memblock.h> #include <linux/of_fdt.h> @@ -105,20 +106,35 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { {}, }; -static void __init exynos5250_dt_map_io(void) +static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0, + "exynos4210-uart.0", NULL), + {}, +}; + +static void __init exynos5_dt_map_io(void) { + unsigned long root = of_get_flat_dt_root(); + exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + + if (of_flat_dt_is_compatible(root, "samsung,exynos5250")) + s3c24xx_init_clocks(24000000); } -static void __init exynos5250_dt_machine_init(void) +static void __init exynos5_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - exynos5250_auxdata_lookup, NULL); + if (of_machine_is_compatible("samsung,exynos5250")) + of_platform_populate(NULL, of_default_bus_match_table, + exynos5250_auxdata_lookup, NULL); + else if (of_machine_is_compatible("samsung,exynos5440")) + of_platform_populate(NULL, of_default_bus_match_table, + exynos5440_auxdata_lookup, NULL); } -static char const *exynos5250_dt_compat[] __initdata = { +static char const *exynos5_dt_compat[] __initdata = { "samsung,exynos5250", + "samsung,exynos5440", NULL }; @@ -137,12 +153,12 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .init_irq = exynos5_init_irq, .smp = smp_ops(exynos_smp_ops), - .map_io = exynos5250_dt_map_io, + .map_io = exynos5_dt_map_io, .handle_irq = gic_handle_irq, - .init_machine = exynos5250_dt_machine_init, + .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, .timer = &exynos4_timer, - .dt_compat = exynos5250_dt_compat, + .dt_compat = exynos5_dt_compat, .restart = exynos5_restart, .reserve = exynos5_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index c931ce15a966..e6f4191cd14c 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -100,6 +100,7 @@ static struct regulator_consumer_supply __initdata ldo3_consumer[] = { REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */ REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */ REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */ + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */ }; static struct regulator_consumer_supply __initdata ldo6_consumer[] = { REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */ @@ -110,6 +111,7 @@ static struct regulator_consumer_supply __initdata ldo7_consumer[] = { static struct regulator_consumer_supply __initdata ldo8_consumer[] = { REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */ + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */ }; static struct regulator_consumer_supply __initdata ldo9_consumer[] = { REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index b601fb8a408b..57668eb68e75 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -19,7 +19,9 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/percpu.h> +#include <linux/of.h> +#include <asm/arch_timer.h> #include <asm/hardware/gic.h> #include <asm/localtimer.h> @@ -476,8 +478,13 @@ static void __init exynos4_timer_resources(void) #endif /* CONFIG_LOCAL_TIMERS */ } -static void __init exynos4_timer_init(void) +static void __init exynos_timer_init(void) { + if (soc_is_exynos5440()) { + arch_timer_of_register(); + return; + } + if ((soc_is_exynos4210()) || (soc_is_exynos5250())) mct_int_type = MCT_INT_SPI; else @@ -489,5 +496,5 @@ static void __init exynos4_timer_init(void) } struct sys_timer exynos4_timer = { - .init = exynos4_timer_init, + .init = exynos_timer_init, }; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index f93d820ecab5..4ca8ff14a5bf 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -36,8 +36,22 @@ extern void exynos4_secondary_startup(void); -#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM5 : S5P_VA_SYSRAM) +static inline void __iomem *cpu_boot_reg_base(void) +{ + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) + return S5P_INFORM5; + return S5P_VA_SYSRAM; +} + +static inline void __iomem *cpu_boot_reg(int cpu) +{ + void __iomem *boot_reg; + + boot_reg = cpu_boot_reg_base(); + if (soc_is_exynos4412()) + boot_reg += 4*cpu; + return boot_reg; +} /* * Write pen_release in a way that is guaranteed to be visible to all @@ -84,6 +98,7 @@ static void __cpuinit exynos_secondary_init(unsigned int cpu) static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; + unsigned long phys_cpu = cpu_logical_map(cpu); /* * Set synchronisation state between this boot processor @@ -99,7 +114,7 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct * Note that "pen_release" is the hardware CPU ID, whereas * "cpu" is Linux's internal ID. */ - write_pen_release(cpu_logical_map(cpu)); + write_pen_release(phys_cpu); if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { __raw_writel(S5P_CORE_LOCAL_PWR_EN, @@ -133,7 +148,7 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct smp_rmb(); __raw_writel(virt_to_phys(exynos4_secondary_startup), - CPU1_BOOT_REG); + cpu_boot_reg(phys_cpu)); gic_raise_softirq(cpumask_of(cpu), 0); if (pen_release == -1) @@ -181,6 +196,8 @@ static void __init exynos_smp_init_cpus(void) static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { + int i; + if (!soc_is_exynos5250()) scu_enable(scu_base_addr()); @@ -190,8 +207,9 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(virt_to_phys(exynos4_secondary_startup), - CPU1_BOOT_REG); + for (i = 1; i < max_cpus; ++i) + __raw_writel(virt_to_phys(exynos4_secondary_startup), + cpu_boot_reg(cpu_logical_map(i))); } struct smp_operations exynos_smp_ops __initdata = { diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c index 5700f23629f7..e2d9dfbf102c 100644 --- a/arch/arm/mach-exynos/setup-i2c0.c +++ b/arch/arm/mach-exynos/setup-i2c0.c @@ -20,7 +20,7 @@ struct platform_device; /* don't need the contents */ void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - if (soc_is_exynos5250()) + if (soc_is_exynos5250() || soc_is_exynos5440()) /* will be implemented with gpio function */ return; diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 0e1d0a42a3ea..551c97e87a78 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,5 +1,5 @@ config ARCH_HIGHBANK - bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7 + bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index 3ec8bdd25d09..8a1ef576d79f 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -3,7 +3,6 @@ obj-y := highbank.o system.o smc.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) -obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_PM_SLEEP) += pm.o diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index 286ec82a4f63..80235b46cb58 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -1,12 +1,10 @@ +#ifndef __HIGHBANK_CORE_H +#define __HIGHBANK_CORE_H + extern void highbank_set_cpu_jump(int cpu, void *jump_addr); extern void highbank_clocks_init(void); extern void highbank_restart(char, const char *); extern void __iomem *scu_base_addr; -#ifdef CONFIG_DEBUG_HIGHBANK_UART -extern void highbank_lluart_map_io(void); -#else -static inline void highbank_lluart_map_io(void) {} -#endif #ifdef CONFIG_PM_SLEEP extern void highbank_pm_init(void); @@ -18,3 +16,5 @@ extern void highbank_smc1(int fn, int arg); extern void highbank_cpu_die(unsigned int cpu); extern struct smp_operations highbank_smp_ops; + +#endif diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 40e36a50304c..dc248167d206 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -26,9 +26,9 @@ #include <linux/smp.h> #include <linux/amba/bus.h> +#include <asm/arch_timer.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> -#include <asm/smp_scu.h> #include <asm/smp_twd.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> @@ -42,16 +42,7 @@ #include "sysregs.h" void __iomem *sregs_base; - -#define HB_SCU_VIRT_BASE 0xfee00000 -void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE)); - -static struct map_desc scu_io_desc __initdata = { - .virtual = HB_SCU_VIRT_BASE, - .pfn = 0, /* run-time */ - .length = SZ_4K, - .type = MT_DEVICE, -}; +void __iomem *scu_base_addr; static void __init highbank_scu_map_io(void) { @@ -60,14 +51,7 @@ static void __init highbank_scu_map_io(void) /* Get SCU base */ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base)); - scu_io_desc.pfn = __phys_to_pfn(base); - iotable_init(&scu_io_desc, 1); -} - -static void __init highbank_map_io(void) -{ - highbank_scu_map_io(); - highbank_lluart_map_io(); + scu_base_addr = ioremap(base, SZ_4K); } #define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu))) @@ -83,6 +67,7 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr) } const static struct of_device_id irq_match[] = { + { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, {} }; @@ -99,6 +84,9 @@ static void __init highbank_init_irq(void) { of_irq_init(irq_match); + if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) + highbank_scu_map_io(); + #ifdef CONFIG_CACHE_L2X0 /* Enable PL310 L2 Cache controller */ highbank_smc1(0x102, 0x1); @@ -136,6 +124,9 @@ static void __init highbank_timer_init(void) sp804_clockevents_init(timer_base, irq, "timer0"); twd_local_timer_of_register(); + + arch_timer_of_register(); + arch_timer_sched_clock_init(); } static struct sys_timer highbank_timer = { @@ -145,7 +136,6 @@ static struct sys_timer highbank_timer = { static void highbank_power_off(void) { hignbank_set_pwr_shutdown(); - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); while (1) cpu_do_idle(); @@ -211,12 +201,13 @@ static void __init highbank_init(void) static const char *highbank_match[] __initconst = { "calxeda,highbank", + "calxeda,ecx-2000", NULL, }; DT_MACHINE_START(HIGHBANK, "Highbank") .smp = smp_ops(highbank_smp_ops), - .map_io = highbank_map_io, + .map_io = debug_ll_io_init, .init_irq = highbank_init_irq, .timer = &highbank_timer, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c index 2c1b8c3c8e45..7b60faccd551 100644 --- a/arch/arm/mach-highbank/hotplug.c +++ b/arch/arm/mach-highbank/hotplug.c @@ -14,13 +14,11 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> -#include <asm/smp_scu.h> #include <asm/cacheflush.h> #include "core.h" +#include "sysregs.h" extern void secondary_startup(void); @@ -33,7 +31,7 @@ void __ref highbank_cpu_die(unsigned int cpu) flush_cache_all(); highbank_set_cpu_jump(cpu, secondary_startup); - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); + highbank_set_core_pwr(); cpu_do_idle(); diff --git a/arch/arm/mach-highbank/lluart.c b/arch/arm/mach-highbank/lluart.c deleted file mode 100644 index 371575019f33..000000000000 --- a/arch/arm/mach-highbank/lluart.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/init.h> -#include <asm/page.h> -#include <asm/sizes.h> -#include <asm/mach/map.h> - -#define HB_DEBUG_LL_PHYS_BASE 0xfff36000 -#define HB_DEBUG_LL_VIRT_BASE 0xfee36000 - -static struct map_desc lluart_io_desc __initdata = { - .virtual = HB_DEBUG_LL_VIRT_BASE, - .pfn = __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, -}; - -void __init highbank_lluart_map_io(void) -{ - iotable_init(&lluart_io_desc, 1); -} diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index fa9560ec6e70..1129957f6c1d 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -42,9 +42,7 @@ static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struc */ static void __init highbank_smp_init_cpus(void) { - unsigned int i, ncores; - - ncores = scu_get_core_count(scu_base_addr); + unsigned int i, ncores = 4; /* sanity check */ if (ncores > NR_CPUS) { @@ -65,7 +63,8 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) { int i; - scu_enable(scu_base_addr); + if (scu_base_addr) + scu_enable(scu_base_addr); /* * Write the address of secondary startup into the jump table diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c index de866f21331f..74aa135966f0 100644 --- a/arch/arm/mach-highbank/pm.c +++ b/arch/arm/mach-highbank/pm.c @@ -19,7 +19,6 @@ #include <linux/suspend.h> #include <asm/proc-fns.h> -#include <asm/smp_scu.h> #include <asm/suspend.h> #include "core.h" @@ -35,8 +34,6 @@ static int highbank_pm_enter(suspend_state_t state) { hignbank_set_pwr_suspend(); highbank_set_cpu_jump(0, cpu_resume); - - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); cpu_suspend(0, highbank_suspend_finish); return 0; diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h index 0e913389f445..e13e8ea7c6cb 100644 --- a/arch/arm/mach-highbank/sysregs.h +++ b/arch/arm/mach-highbank/sysregs.h @@ -17,6 +17,10 @@ #define _MACH_HIGHBANK__SYSREGS_H_ #include <linux/io.h> +#include <linux/smp.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> +#include "core.h" extern void __iomem *sregs_base; @@ -29,24 +33,39 @@ extern void __iomem *sregs_base; #define HB_PWR_HARD_RESET 2 #define HB_PWR_SHUTDOWN 3 +#define SREG_CPU_PWR_CTRL(c) (0x200 + ((c) * 4)) + +static inline void highbank_set_core_pwr(void) +{ + int cpu = cpu_logical_map(smp_processor_id()); + if (scu_base_addr) + scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); + else + writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu)); +} + static inline void hignbank_set_pwr_suspend(void) { writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } static inline void hignbank_set_pwr_shutdown(void) { writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } static inline void hignbank_set_pwr_soft_reset(void) { writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } static inline void hignbank_set_pwr_hard_reset(void) { writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } #endif diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 86e37cd9376c..aed96ad9bd4a 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -14,7 +14,6 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/io.h> -#include <asm/smp_scu.h> #include <asm/proc-fns.h> #include "core.h" @@ -27,7 +26,6 @@ void highbank_restart(char mode, const char *cmd) else hignbank_set_pwr_soft_reset(); - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); while (1) cpu_do_idle(); } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index b09924112f99..1ad0d76de8c7 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -401,6 +401,7 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MX2_CAMERA + select IMX_HAVE_PLATFORM_MX2_EMMA select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select LEDS_GPIO_REGISTER @@ -827,6 +828,7 @@ config SOC_IMX53 select ARCH_MX5 select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN + select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL select PINCTRL_IMX53 select SOC_IMX5 diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 585ab256c58f..4c1d1e4efc74 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -51,8 +51,10 @@ static const char *vpu_sel_clks[] = { "spll", "mpll_main2", }; static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", }; +static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", }; +static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", }; static const char *clko_sel_clks[] = { - "ckil", "prem", "ckih", "ckih", + "ckil", "fpm", "ckih", "ckih", "ckih", "mpll", "spll", "cpu_div", "ahb", "ipg", "per1_div", "per2_div", "per3_div", "per4_div", "ssi1_div", "ssi2_div", @@ -79,7 +81,8 @@ enum mx27_clks { vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate, csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate, uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate, - uart2_ipg_gate, uart1_ipg_gate, clk_max + uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel, + mpll_sel, clk_max }; static struct clk *clk[clk_max]; @@ -91,7 +94,15 @@ int __init mx27_clocks_init(unsigned long fref) clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckih] = imx_clk_fixed("ckih", fref); clk[ckil] = imx_clk_fixed("ckil", 32768); - clk[mpll] = imx_clk_pllv1("mpll", "ckih", CCM_MPCTL0); + clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1); + clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3); + + clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, + mpll_osc_sel_clks, + ARRAY_SIZE(mpll_osc_sel_clks)); + clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, + ARRAY_SIZE(mpll_sel_clks)); + clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0); clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0); clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3); @@ -224,6 +235,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0"); + clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index abb71f6b4d60..e8c0473c7568 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -87,6 +87,7 @@ enum imx5_clks { }; static struct clk *clk[clk_max]; +static struct clk_onecell_data clk_data; static void __init mx5_clocks_common_init(unsigned long rate_ckil, unsigned long rate_osc, unsigned long rate_ckih1, @@ -305,6 +306,10 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ clk_prepare_enable(clk[emi_slow_gate]); /* eim */ + clk_prepare_enable(clk[mipi_hsc1_gate]); + clk_prepare_enable(clk[mipi_hsc2_gate]); + clk_prepare_enable(clk[mipi_esc_gate]); + clk_prepare_enable(clk[mipi_hsp_gate]); clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ @@ -314,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, unsigned long rate_ckih1, unsigned long rate_ckih2) { int i; + struct device_node *np; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE); clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE); @@ -342,16 +348,20 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, pr_err("i.MX51 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-ccm"); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2); clk_register_clkdev(clk[hsi2c_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL); clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu"); - clk_register_clkdev(clk[ipu_gate], "hsp", "imx51-ipu"); + clk_register_clkdev(clk[ipu_gate], "bus", "40000000.ipu"); + clk_register_clkdev(clk[ipu_di0_gate], "di0", "40000000.ipu"); + clk_register_clkdev(clk[ipu_di1_gate], "di1", "40000000.ipu"); clk_register_clkdev(clk[usb_phy_gate], "phy", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx51.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.0"); @@ -365,10 +375,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx51.3"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.3"); clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx51.3"); - clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi"); - clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi"); - clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi"); - clk_register_clkdev(clk[nfc_gate], NULL, "83fdb000.nand"); /* set the usboh3 parent to pll2_sw */ clk_set_parent(clk[usboh3_sel], clk[pll2_sw]); @@ -392,6 +398,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, { int i; unsigned long r; + struct device_node *np; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -436,15 +443,20 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, pr_err("i.MX53 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm"); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2); clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx53-ipu"); - clk_register_clkdev(clk[ipu_gate], "hsp", "imx53-ipu"); + clk_register_clkdev(clk[ipu_gate], "bus", "18000000.ipu"); + clk_register_clkdev(clk[ipu_di0_gate], "di0", "18000000.ipu"); + clk_register_clkdev(clk[ipu_di1_gate], "di1", "18000000.ipu"); + clk_register_clkdev(clk[ipu_gate], "hsp", "18000000.ipu"); clk_register_clkdev(clk[usb_phy1_gate], "usb_phy1", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx53.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.0"); @@ -458,14 +470,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx53.3"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.3"); clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx53.3"); - clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); - clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); - clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); - clk_register_clkdev(clk[nfc_gate], NULL, "63fdb000.nand"); - clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can"); - clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can"); - clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can"); - clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can"); /* set SDHC root clock to 200MHZ*/ clk_set_rate(clk[esdhc_a_podf], 200000000); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 5f9f5919dd74..7f2c10c7413a 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -105,7 +105,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m" static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; @@ -152,8 +152,9 @@ enum mx6q_clks { gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1, ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, - pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, + pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, + sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, clk_max }; @@ -164,6 +165,13 @@ static enum mx6q_clks const clks_init_on[] __initconst = { mmdc_ch0_axi, rom, }; +static struct clk_div_table clk_enet_ref_table[] = { + { .val = 0, .div = 20, }, + { .val = 1, .div = 10, }, + { .val = 2, .div = 5, }, + { .val = 3, .div = 4, }, +}; + int __init mx6q_clocks_init(void) { struct device_node *np; @@ -190,19 +198,29 @@ int __init mx6q_clocks_init(void) base = of_iomap(np, 0); WARN_ON(!base); - /* type name parent_name base gate_mask div_mask */ - clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x2000, 0x7f); - clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x2000, 0x1); - clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x2000, 0x3); - clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x2000, 0x7f); - clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x2000, 0x7f); - clk[pll6_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll6_mlb", "osc", base + 0xd0, 0x2000, 0x0); - clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3); - clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3); + /* type name parent_name base div_mask */ + clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); + clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); + clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); + clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); + clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); + clk[pll6_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); + clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3); + clk[pll8_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll8_mlb", "osc", base + 0xd0, 0x0); clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6); clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6); + clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5); + clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4); + + clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20); + clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); + + clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, + base + 0xe0, 0, 2, 0, clk_enet_ref_table, + &imx_ccm_lock); + /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); @@ -358,7 +376,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll6_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index 36aac947bce1..d09bc3df9a7a 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -31,7 +31,6 @@ * @clk_hw: clock source * @base: base address of PLL registers * @powerup_set: set POWER bit to power up the PLL - * @gate_mask: mask of gate bits * @div_mask: mask of divider bits * * IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3 @@ -41,7 +40,6 @@ struct clk_pllv3 { struct clk_hw hw; void __iomem *base; bool powerup_set; - u32 gate_mask; u32 div_mask; }; @@ -89,7 +87,7 @@ static int clk_pllv3_enable(struct clk_hw *hw) u32 val; val = readl_relaxed(pll->base); - val |= pll->gate_mask; + val |= BM_PLL_ENABLE; writel_relaxed(val, pll->base); return 0; @@ -101,7 +99,7 @@ static void clk_pllv3_disable(struct clk_hw *hw) u32 val; val = readl_relaxed(pll->base); - val &= ~pll->gate_mask; + val &= ~BM_PLL_ENABLE; writel_relaxed(val, pll->base); } @@ -287,66 +285,7 @@ static const struct clk_ops clk_pllv3_av_ops = { static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 div = readl_relaxed(pll->base) & pll->div_mask; - - switch (div) { - case 0: - return 25000000; - case 1: - return 50000000; - case 2: - return 100000000; - case 3: - return 125000000; - } - - return 0; -} - -static long clk_pllv3_enet_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - if (rate >= 125000000) - rate = 125000000; - else if (rate >= 100000000) - rate = 100000000; - else if (rate >= 50000000) - rate = 50000000; - else - rate = 25000000; - return rate; -} - -static int clk_pllv3_enet_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val, div; - - switch (rate) { - case 25000000: - div = 0; - break; - case 50000000: - div = 1; - break; - case 100000000: - div = 2; - break; - case 125000000: - div = 3; - break; - default: - return -EINVAL; - } - - val = readl_relaxed(pll->base); - val &= ~pll->div_mask; - val |= div; - writel_relaxed(val, pll->base); - - return 0; + return 500000000; } static const struct clk_ops clk_pllv3_enet_ops = { @@ -355,8 +294,6 @@ static const struct clk_ops clk_pllv3_enet_ops = { .enable = clk_pllv3_enable, .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_enet_recalc_rate, - .round_rate = clk_pllv3_enet_round_rate, - .set_rate = clk_pllv3_enet_set_rate, }; static const struct clk_ops clk_pllv3_mlb_ops = { @@ -368,7 +305,7 @@ static const struct clk_ops clk_pllv3_mlb_ops = { struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, const char *parent_name, void __iomem *base, - u32 gate_mask, u32 div_mask) + u32 div_mask) { struct clk_pllv3 *pll; const struct clk_ops *ops; @@ -400,7 +337,6 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, ops = &clk_pllv3_ops; } pll->base = base; - pll->gate_mask = gate_mask; pll->div_mask = div_mask; init.name = name; diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 5f2d8acca25f..9d1f3b99d1d3 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -22,8 +22,7 @@ enum imx_pllv3_type { }; struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, - const char *parent_name, void __iomem *base, u32 gate_mask, - u32 div_mask); + const char *parent_name, void __iomem *base, u32 div_mask); struct clk *clk_register_gate2(struct device *dev, const char *name, const char *parent_name, unsigned long flags, diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 8a1ad7972d4c..130962519751 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -53,8 +53,10 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) + +extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data; #define imx27_add_mx2_emmaprp() \ - imx_add_mx2_emmaprp(&imx27_mx2_camera_data) + imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; #define imx27_add_mxc_ehci_otg(pdata) \ diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index a35d9841f494..9a8f1ca7bcb1 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -56,6 +56,9 @@ config IMX_HAVE_PLATFORM_MX1_CAMERA config IMX_HAVE_PLATFORM_MX2_CAMERA bool +config IMX_HAVE_PLATFORM_MX2_EMMA + bool + config IMX_HAVE_PLATFORM_MXC_EHCI bool diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 2abe2a5144d0..6acf37e0c119 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -30,3 +30,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index e4b790b9e2aa..6277baf1b7be 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -232,8 +232,15 @@ struct imx_mx2_camera_data { struct platform_device *__init imx_add_mx2_camera( const struct imx_mx2_camera_data *data, const struct mx2_camera_platform_data *pdata); + + +struct imx_mx2_emma_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; struct platform_device *__init imx_add_mx2_emmaprp( - const struct imx_mx2_camera_data *data); + const struct imx_mx2_emma_data *data); #include <linux/platform_data/usb-ehci-mxc.h> struct imx_mxc_ehci_data { diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c index f4910160346b..b53e1f348f51 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c @@ -65,20 +65,3 @@ struct platform_device *__init imx_add_mx2_camera( pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } -struct platform_device *__init imx_add_mx2_emmaprp( - const struct imx_mx2_camera_data *data) -{ - struct resource res[] = { - { - .start = data->iobaseemmaprp, - .end = data->iobaseemmaprp + data->iosizeemmaprp - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irqemmaprp, - .end = data->irqemmaprp, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask("m2m-emmaprp", 0, - res, 2, NULL, 0, DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 50742990a136..5ffa40c673f8 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -19,35 +19,9 @@ #include "common.h" #include "mx51.h" -/* - * Lookup table for attaching a specific name and platform_data pointer to - * devices as they get created by of_platform_populate(). Ideally this table - * would not exist, but the current clock implementation depends on some devices - * having a specific name. - */ -static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL), - OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL), - OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL), - OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL), - OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL), - OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL), - OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx21-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx21-i2c.1", NULL), - OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL), - OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL), - { /* sentinel */ } -}; - static void __init imx51_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - imx51_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static void __init imx51_timer_init(void) diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index b74422679126..318bd8df7fcc 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -51,6 +51,10 @@ #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25) +#define VERSION_MASK 0x7 +#define MOTHERBOARD_SHIFT 4 +#define EXPBOARD_SHIFT 0 + #define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) #define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) #define MOTHERBOARD_BIT0 (GPIO_PORTD + 29) @@ -237,7 +241,7 @@ static struct mx2_camera_platform_data visstrim_camera = { static phys_addr_t mx2_camera_base __initdata; #define MX2_CAMERA_BUF_SIZE SZ_8M -static void __init visstrim_camera_init(void) +static void __init visstrim_analog_camera_init(void) { struct platform_device *pdev; int dma; @@ -474,6 +478,27 @@ static void __init visstrim_deinterlace_init(void) return; } +/* Emma-PrP for format conversion */ +static void __init visstrim_emmaprp_init(void) +{ + struct platform_device *pdev; + int dma; + + pdev = imx27_add_mx2_emmaprp(); + if (IS_ERR(pdev)) + return; + + /* + * Use the same memory area as the analog camera since both + * devices are, by nature, exclusive. + */ + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base, mx2_camera_base, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + pr_err("Failed to declare memory for emmaprp\n"); +} /* Audio */ static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = { @@ -507,13 +532,14 @@ static void __init visstrim_m10_revision(void) mo_version |= !gpio_get_value(MOTHERBOARD_BIT0); system_rev = 0x27000; - system_rev |= (mo_version << 4); - system_rev |= exp_version; + system_rev |= (mo_version << MOTHERBOARD_SHIFT); + system_rev |= (exp_version << EXPBOARD_SHIFT); } static void __init visstrim_m10_board_init(void) { int ret; + int mo_version; imx27_soc_init(); visstrim_m10_revision(); @@ -546,8 +572,24 @@ static void __init visstrim_m10_board_init(void) platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); gpio_led_register_device(0, &visstrim_m10_led_data); - visstrim_deinterlace_init(); - visstrim_camera_init(); + + /* Use mother board version to decide what video devices we shall use */ + mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK; + if (mo_version & 0x1) { + visstrim_emmaprp_init(); + + /* + * Despite not being used, tvp5150 must be + * powered on to avoid I2C problems. To minimize + * power consupmtion keep reset enabled. + */ + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + } else { + visstrim_deinterlace_init(); + visstrim_analog_camera_init(); + } visstrim_coda_init(); } diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index e71e62610eba..860284dea0e7 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -23,34 +23,6 @@ #include "common.h" #include "mx53.h" -/* - * Lookup table for attaching a specific name and platform_data pointer to - * devices as they get created by of_platform_populate(). Ideally this table - * would not exist, but the current clock implementation depends on some devices - * having a specific name. - */ -static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL), - OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL), - OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx21-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx21-i2c.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx21-i2c.2", NULL), - OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL), - OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL), - { /* sentinel */ } -}; - static void __init imx53_qsb_init(void) { struct clk *clk; @@ -69,8 +41,7 @@ static void __init imx53_dt_init(void) if (of_machine_is_compatible("fsl,imx53-qsb")) imx53_qsb_init(); - of_platform_populate(NULL, of_default_bus_match_table, - imx53_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static void __init imx53_timer_init(void) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9511142d436c..4eb1b3ac794c 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -151,6 +151,17 @@ static void __init imx6q_sabrelite_init(void) imx6q_sabrelite_cko1_setup(); } +static void __init imx6q_1588_init(void) +{ + struct regmap *gpr; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, 0x4, 1 << 21, 1 << 21); + else + pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n"); + +} static void __init imx6q_usb_init(void) { struct regmap *anatop; @@ -187,6 +198,7 @@ static void __init imx6q_init_machine(void) imx6q_pm_init(); imx6q_usb_init(); + imx6q_1588_init(); } static struct cpuidle_driver imx6q_cpuidle_driver = { diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index f92caf1b30ba..79d71cf23a1d 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -81,8 +81,28 @@ void __init imx50_init_early(void) mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); } +/* + * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by + * the Freescale marketing division. However this did not remove the + * hardware from the chip which still needs to be configured for proper + * IPU support. + */ +static void __init imx51_ipu_mipi_setup(void) +{ + void __iomem *hsc_addr; + hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR); + + /* setup MIPI module to legacy mode */ + __raw_writel(0xf00, hsc_addr); + + /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ + __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff, + hsc_addr + 0x800); +} + void __init imx51_init_early(void) { + imx51_ipu_mipi_setup(); mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index e428f3ab15c7..9f82f9dcbb98 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -21,10 +21,9 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/io.h> +#include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> -#include <linux/clkdev.h> -#include <asm/hardware/icst.h> #include <mach/lm.h> #include <mach/impd1.h> #include <asm/sizes.h> @@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position"); struct impd1_module { void __iomem *base; - struct clk vcos[2]; - struct clk_lookup *clks[3]; -}; - -static const struct icst_params impd1_vco_params = { - .ref = 24000000, /* 24 MHz */ - .vco_max = ICST525_VCO_MAX_3V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 12, - .vd_max = 519, - .rd_min = 3, - .rd_max = 120, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static void impd1_setvco(struct clk *clk, struct icst_vco vco) -{ - struct impd1_module *impd1 = clk->data; - u32 val = vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, impd1->base + IMPD1_LOCK); - writel(val, clk->vcoreg); - writel(0, impd1->base + IMPD1_LOCK); - -#ifdef DEBUG - vco.v = val & 0x1ff; - vco.r = (val >> 9) & 0x7f; - vco.s = (val >> 16) & 7; - - pr_debug("IM-PD1: VCO%d clock is %ld Hz\n", - vconr, icst525_hz(&impd1_vco_params, vco)); -#endif -} - -static const struct clk_ops impd1_clk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = impd1_setvco, }; void impd1_tweak_control(struct device *dev, u32 mask, u32 val) @@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = { } }; -static struct clk fixed_14745600 = { - .rate = 14745600, -}; - static int impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; @@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev) printk("IM-PD1 found at 0x%08lx\n", (unsigned long)dev->resource.start); - for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { - impd1->vcos[i].ops = &impd1_clk_ops, - impd1->vcos[i].owner = THIS_MODULE, - impd1->vcos[i].params = &impd1_vco_params, - impd1->vcos[i].data = impd1; - } - impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1; - impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2; - - impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000", - dev->id); - impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100", - dev->id); - impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200", - dev->id); - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_add(impd1->clks[i]); + integrator_impd1_clk_init(impd1->base, dev->id); for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { struct impd1_device *idev = impd1_devs + i; @@ -402,9 +342,10 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); - d = amba_ahb_device_add(&dev->dev, devname, pc_base, SZ_4K, - dev->irq, dev->irq, - idev->platform_data, idev->id); + d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, + dev->irq, dev->irq, + idev->platform_data, idev->id, + &dev->resource); if (IS_ERR(d)) { dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d)); continue; @@ -431,12 +372,9 @@ static int impd1_remove_one(struct device *dev, void *data) static void impd1_remove(struct lm_device *dev) { struct impd1_module *impd1 = lm_get_drvdata(dev); - int i; device_for_each_child(&dev->dev, NULL, impd1_remove_one); - - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_drop(impd1->clks[i]); + integrator_impd1_clk_exit(dev->id); lm_set_drvdata(dev, NULL); diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h index 7371018455d2..eff0adad9ae3 100644 --- a/arch/arm/mach-integrator/include/mach/irqs.h +++ b/arch/arm/mach-integrator/include/mach/irqs.h @@ -19,64 +19,63 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* - * Interrupt numbers +/* + * Interrupt numbers, all of the above are just static reservations + * used so they can be encoded into device resources. They will finally + * be done away with when switching to device tree. */ -#define IRQ_PIC_START 1 -#define IRQ_SOFTINT 1 -#define IRQ_UARTINT0 2 -#define IRQ_UARTINT1 3 -#define IRQ_KMIINT0 4 -#define IRQ_KMIINT1 5 -#define IRQ_TIMERINT0 6 -#define IRQ_TIMERINT1 7 -#define IRQ_TIMERINT2 8 -#define IRQ_RTCINT 9 -#define IRQ_AP_EXPINT0 10 -#define IRQ_AP_EXPINT1 11 -#define IRQ_AP_EXPINT2 12 -#define IRQ_AP_EXPINT3 13 -#define IRQ_AP_PCIINT0 14 -#define IRQ_AP_PCIINT1 15 -#define IRQ_AP_PCIINT2 16 -#define IRQ_AP_PCIINT3 17 -#define IRQ_AP_V3INT 18 -#define IRQ_AP_CPINT0 19 -#define IRQ_AP_CPINT1 20 -#define IRQ_AP_LBUSTIMEOUT 21 -#define IRQ_AP_APCINT 22 -#define IRQ_CP_CLCDCINT 23 -#define IRQ_CP_MMCIINT0 24 -#define IRQ_CP_MMCIINT1 25 -#define IRQ_CP_AACIINT 26 -#define IRQ_CP_CPPLDINT 27 -#define IRQ_CP_ETHINT 28 -#define IRQ_CP_TSPENINT 29 -#define IRQ_PIC_END 29 +#define IRQ_PIC_START 64 +#define IRQ_SOFTINT (IRQ_PIC_START+0) +#define IRQ_UARTINT0 (IRQ_PIC_START+1) +#define IRQ_UARTINT1 (IRQ_PIC_START+2) +#define IRQ_KMIINT0 (IRQ_PIC_START+3) +#define IRQ_KMIINT1 (IRQ_PIC_START+4) +#define IRQ_TIMERINT0 (IRQ_PIC_START+5) +#define IRQ_TIMERINT1 (IRQ_PIC_START+6) +#define IRQ_TIMERINT2 (IRQ_PIC_START+7) +#define IRQ_RTCINT (IRQ_PIC_START+8) +#define IRQ_AP_EXPINT0 (IRQ_PIC_START+9) +#define IRQ_AP_EXPINT1 (IRQ_PIC_START+10) +#define IRQ_AP_EXPINT2 (IRQ_PIC_START+11) +#define IRQ_AP_EXPINT3 (IRQ_PIC_START+12) +#define IRQ_AP_PCIINT0 (IRQ_PIC_START+13) +#define IRQ_AP_PCIINT1 (IRQ_PIC_START+14) +#define IRQ_AP_PCIINT2 (IRQ_PIC_START+15) +#define IRQ_AP_PCIINT3 (IRQ_PIC_START+16) +#define IRQ_AP_V3INT (IRQ_PIC_START+17) +#define IRQ_AP_CPINT0 (IRQ_PIC_START+18) +#define IRQ_AP_CPINT1 (IRQ_PIC_START+19) +#define IRQ_AP_LBUSTIMEOUT (IRQ_PIC_START+20) +#define IRQ_AP_APCINT (IRQ_PIC_START+21) +#define IRQ_CP_CLCDCINT (IRQ_PIC_START+22) +#define IRQ_CP_MMCIINT0 (IRQ_PIC_START+23) +#define IRQ_CP_MMCIINT1 (IRQ_PIC_START+24) +#define IRQ_CP_AACIINT (IRQ_PIC_START+25) +#define IRQ_CP_CPPLDINT (IRQ_PIC_START+26) +#define IRQ_CP_ETHINT (IRQ_PIC_START+27) +#define IRQ_CP_TSPENINT (IRQ_PIC_START+28) +#define IRQ_PIC_END (IRQ_PIC_START+28) -#define IRQ_CIC_START 32 -#define IRQ_CM_SOFTINT 32 -#define IRQ_CM_COMMRX 33 -#define IRQ_CM_COMMTX 34 -#define IRQ_CIC_END 34 +#define IRQ_CIC_START (IRQ_PIC_END+1) +#define IRQ_CM_SOFTINT (IRQ_CIC_START+0) +#define IRQ_CM_COMMRX (IRQ_CIC_START+1) +#define IRQ_CM_COMMTX (IRQ_CIC_START+2) +#define IRQ_CIC_END (IRQ_CIC_START+2) /* * IntegratorCP only */ -#define IRQ_SIC_START 35 -#define IRQ_SIC_CP_SOFTINT 35 -#define IRQ_SIC_CP_RI0 36 -#define IRQ_SIC_CP_RI1 37 -#define IRQ_SIC_CP_CARDIN 38 -#define IRQ_SIC_CP_LMINT0 39 -#define IRQ_SIC_CP_LMINT1 40 -#define IRQ_SIC_CP_LMINT2 41 -#define IRQ_SIC_CP_LMINT3 42 -#define IRQ_SIC_CP_LMINT4 43 -#define IRQ_SIC_CP_LMINT5 44 -#define IRQ_SIC_CP_LMINT6 45 -#define IRQ_SIC_CP_LMINT7 46 -#define IRQ_SIC_END 46 - -#define NR_IRQS_INTEGRATOR_AP 34 -#define NR_IRQS_INTEGRATOR_CP 47 +#define IRQ_SIC_START (IRQ_CIC_END+1) +#define IRQ_SIC_CP_SOFTINT (IRQ_SIC_START+0) +#define IRQ_SIC_CP_RI0 (IRQ_SIC_START+1) +#define IRQ_SIC_CP_RI1 (IRQ_SIC_START+2) +#define IRQ_SIC_CP_CARDIN (IRQ_SIC_START+3) +#define IRQ_SIC_CP_LMINT0 (IRQ_SIC_START+4) +#define IRQ_SIC_CP_LMINT1 (IRQ_SIC_START+5) +#define IRQ_SIC_CP_LMINT2 (IRQ_SIC_START+6) +#define IRQ_SIC_CP_LMINT3 (IRQ_SIC_START+7) +#define IRQ_SIC_CP_LMINT4 (IRQ_SIC_START+8) +#define IRQ_SIC_CP_LMINT5 (IRQ_SIC_START+9) +#define IRQ_SIC_CP_LMINT6 (IRQ_SIC_START+10) +#define IRQ_SIC_CP_LMINT7 (IRQ_SIC_START+11) +#define IRQ_SIC_END (IRQ_SIC_START+11) diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index a0a7cbbb7a70..11e2a4145807 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -31,6 +31,7 @@ #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/irqchip/versatile-fpga.h> #include <linux/mtd/physmap.h> #include <linux/clk.h> #include <linux/platform_data/clk-integrator.h> @@ -59,8 +60,6 @@ #include <asm/mach/pci.h> #include <asm/mach/time.h> -#include <plat/fpga-irq.h> - #include "common.h" /* Base address to the AP system controller */ @@ -584,7 +583,6 @@ static const char * ap_dt_board_compat[] = { DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") .reserve = integrator_reserve, .map_io = ap_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_AP, .init_early = ap_init_early, .init_irq = ap_init_irq_of, .handle_irq = fpga_handle_irq, @@ -715,7 +713,6 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = ap_map_io_atag, - .nr_irqs = NR_IRQS_INTEGRATOR_AP, .init_early = ap_init_early, .init_irq = ap_init_irq, .handle_irq = fpga_handle_irq, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 29df06b35d0d..7322838c0447 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -20,6 +20,7 @@ #include <linux/amba/clcd.h> #include <linux/amba/mmci.h> #include <linux/io.h> +#include <linux/irqchip/versatile-fpga.h> #include <linux/gfp.h> #include <linux/mtd/physmap.h> #include <linux/platform_data/clk-integrator.h> @@ -47,7 +48,6 @@ #include <asm/hardware/timer-sp.h> #include <plat/clcd.h> -#include <plat/fpga-irq.h> #include <plat/sched_clock.h> #include "common.h" @@ -387,7 +387,6 @@ static const char * intcp_dt_board_compat[] = { DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .reserve = integrator_reserve, .map_io = intcp_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_CP, .init_early = intcp_init_early, .init_irq = intcp_init_irq_of, .handle_irq = fpga_handle_irq, @@ -482,7 +481,7 @@ static void __init intcp_init_irq(void) u32 pic_mask, cic_mask, sic_mask; /* These masks are for the HW IRQ registers */ - pic_mask = ~((~0u) << (11 - IRQ_PIC_START)); + pic_mask = ~((~0u) << (11 - 0)); pic_mask |= (~((~0u) << (29 - 22))) << 22; cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)); sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); @@ -563,7 +562,6 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = intcp_map_io_atag, - .nr_irqs = NR_IRQS_INTEGRATOR_CP, .init_early = intcp_init_early, .init_irq = intcp_init_irq, .handle_irq = fpga_handle_irq, diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 1694f01ce2b6..6d6bde3e15fa 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -410,6 +410,7 @@ void __init ixp4xx_pci_preinit(void) * Enable the IO window to be way up high, at 0xfffffc00 */ local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01); + local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */ } else { printk("PCI: IXP4xx is target - No bus scan performed\n"); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index fdf91a160884..8c0c0e2d0727 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -67,15 +67,12 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE - }, -#ifdef CONFIG_DEBUG_LL - { /* Debug UART mapping */ - .virtual = (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), - .length = IXP4XX_DEBUG_UART_REGION_SIZE, + }, { /* Queue Manager */ + .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), + .length = IXP4XX_QMGR_REGION_SIZE, .type = MT_DEVICE - } -#endif + }, }; void __init ixp4xx_map_io(void) diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index b800a031207c..53b8348dfcc2 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -15,6 +15,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/pci.h> +#include <asm/system_info.h> #define SLOT_ETHA 0x0B /* IDSEL = AD21 */ #define SLOT_ETHB 0x0C /* IDSEL = AD20 */ @@ -329,7 +330,7 @@ static struct platform_device device_hss_tab[] = { }; -static struct platform_device *device_tab[6] __initdata = { +static struct platform_device *device_tab[7] __initdata = { &device_flash, /* index 0 */ }; diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 8c9f8d564492..ff686cbc5df4 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -17,8 +17,8 @@ #else mov \rp, #0 #endif - orr \rv, \rp, #0xff000000 @ virtual - orr \rv, \rv, #0x00b00000 + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00f00000 orr \rp, \rp, #0xc8000000 @ physical .endm diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index eb68b61ce975..c5bae9c035d5 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -30,51 +30,43 @@ * * 0x50000000 0x10000000 ioremap'd EXP BUS * - * 0x6000000 0x00004000 ioremap'd QMgr + * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals * - * 0xC0000000 0x00001000 0xffbff000 PCI CFG + * 0xC0000000 0x00001000 0xFEF13000 PCI CFG * - * 0xC4000000 0x00001000 0xffbfe000 EXP CFG + * 0xC4000000 0x00001000 0xFEF14000 EXP CFG * - * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals + * 0x60000000 0x00004000 0xFEF15000 QMgr */ /* * Queue Manager */ -#define IXP4XX_QMGR_BASE_PHYS (0x60000000) -#define IXP4XX_QMGR_REGION_SIZE (0x00004000) +#define IXP4XX_QMGR_BASE_PHYS 0x60000000 +#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) +#define IXP4XX_QMGR_REGION_SIZE 0x00004000 /* - * Expansion BUS Configuration registers + * Peripheral space, including debug UART. Must be section-aligned so that + * it can be used with the low-level debug code. */ -#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT IOMEM(0xFFBFE000) -#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) +#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000 +#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000) +#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000 /* * PCI Config registers */ -#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFFBFF000) -#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) - -/* - * Peripheral space - */ -#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFFBEB000) -#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) +#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000 +#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000) +#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000 /* - * Debug UART - * - * This is basically a remap of UART1 into a region that is section - * aligned so that it * can be used with the low-level debug code. + * Expansion BUS Configuration registers */ -#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) -#define IXP4XX_DEBUG_UART_BASE_VIRT IOMEM(0xffb00000) -#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) +#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000 +#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000 +#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000 #define IXP4XX_EXP_CS0_OFFSET 0x00 #define IXP4XX_EXP_CS1_OFFSET 0x04 diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 9e7cad2d54cb..4de8da536dbb 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue); static inline void qmgr_put_entry(unsigned int queue, u32 val) { - extern struct qmgr_regs __iomem *qmgr_regs; + struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val) static inline u32 qmgr_get_entry(unsigned int queue) { u32 val; - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; val = __raw_readl(&qmgr_regs->acc[queue][0]); #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue) static inline int __qmgr_get_stat1(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } static inline int __qmgr_get_stat2(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; @@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue) */ static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statne_h) >> (queue - HALF_QUEUES)) & 0x01; @@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue) */ static inline int qmgr_stat_full(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statf_h) >> (queue - HALF_QUEUES)) & 0x01; diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h index 80d6da2eafac..7bd8b96c8843 100644 --- a/arch/arm/mach-ixp4xx/include/mach/udc.h +++ b/arch/arm/mach-ixp4xx/include/mach/udc.h @@ -2,7 +2,7 @@ * arch/arm/mach-ixp4xx/include/mach/udc.h * */ -#include <asm/mach/udc_pxa2xx.h> +#include <linux/platform_data/pxa2xx_udc.h> extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index a17ed79207a4..d4eb09a62863 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -116,7 +116,11 @@ /* NPE mailbox_status value for reset */ #define RESET_MBOX_STAT 0x0000F0F0 -const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" }; +#define NPE_A_FIRMWARE "NPE-A" +#define NPE_B_FIRMWARE "NPE-B" +#define NPE_C_FIRMWARE "NPE-C" + +const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE }; #define print_npe(pri, npe, fmt, ...) \ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) @@ -724,6 +728,9 @@ module_exit(npe_cleanup_module); MODULE_AUTHOR("Krzysztof Halasa"); MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE(NPE_A_FIRMWARE); +MODULE_FIRMWARE(NPE_B_FIRMWARE); +MODULE_FIRMWARE(NPE_C_FIRMWARE); EXPORT_SYMBOL(npe_names); EXPORT_SYMBOL(npe_running); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index 852f7c9f87d0..9d1b6b7c394c 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -14,7 +14,7 @@ #include <linux/module.h> #include <mach/qmgr.h> -struct qmgr_regs __iomem *qmgr_regs; +static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ @@ -293,12 +293,6 @@ static int qmgr_init(void) if (mem_res == NULL) return -EBUSY; - qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); - if (qmgr_regs == NULL) { - err = -ENOMEM; - goto error_map; - } - /* reset qmgr registers */ for (i = 0; i < 4; i++) { __raw_writel(0x33333333, &qmgr_regs->stat1[i]); @@ -347,8 +341,6 @@ static int qmgr_init(void) error_irq2: free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: - iounmap(qmgr_regs); -error_map: release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); return err; } @@ -359,7 +351,6 @@ static void qmgr_remove(void) free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); synchronize_irq(IRQ_IXP4XX_QM2); - iounmap(qmgr_regs); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } @@ -369,7 +360,6 @@ module_exit(qmgr_remove); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Krzysztof Halasa"); -EXPORT_SYMBOL(qmgr_regs); EXPORT_SYMBOL(qmgr_set_irq); EXPORT_SYMBOL(qmgr_enable_irq); EXPORT_SYMBOL(qmgr_disable_irq); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 1e9f90ee0f5c..ef102646ba9a 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -208,14 +208,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } +/* + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it + * is operating as a root complex this needs to be switched to + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on + * the device. Decoding setup is handled by the orion code. + */ static void __devinit rc_pci_fixup(struct pci_dev *dev) { - /* - * Prevent enumeration of root complex. - */ if (dev->bus->parent == NULL && dev->devfn == 0) { int i; + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index f48c2e961b84..dd5d6f532e8c 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -585,6 +585,13 @@ static struct clk clk_timer3 = { .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN, .get_rate = local_return_parent_rate, }; +static struct clk clk_mpwm = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, + .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN, + .get_rate = local_return_parent_rate, +}; static struct clk clk_wdt = { .parent = &clk_pclk, .enable = local_onoff_enable, @@ -1202,6 +1209,7 @@ static struct clk_lookup lookups[] = { CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm), + CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm), CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h index acc4aabf1c7b..b5612a1d1839 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -515,6 +515,7 @@ /* * clkpwr_timers_pwms_clk_ctrl_1 register definitions */ +#define LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN 0x40 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN 0x20 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN 0x10 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN 0x08 diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 3c6332753358..9ecb8f9c4ef5 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -412,7 +412,6 @@ static const struct of_device_id mic_of_match[] __initconst = { void __init lpc32xx_init_irq(void) { unsigned int i; - int irq_base; /* Setup MIC */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE)); @@ -443,15 +442,6 @@ void __init lpc32xx_init_irq(void) lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32); lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64); - /* mask all interrupts except SUBIRQ */ - __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE)); - __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - - /* MIC SUBIRQx interrupts will route handling to the chain handlers */ - irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler); - irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler); - /* Initially disable all wake events */ __raw_writel(0, LPC32XX_CLKPWR_P01_ER); __raw_writel(0, LPC32XX_CLKPWR_INT_ER); @@ -475,16 +465,13 @@ void __init lpc32xx_init_irq(void) of_irq_init(mic_of_match); - irq_base = irq_alloc_descs(-1, 0, NR_IRQS, 0); - if (irq_base < 0) { - pr_warn("Cannot allocate irq_descs, assuming pre-allocated\n"); - irq_base = 0; - } - lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS, - irq_base, 0, - &irq_domain_simple_ops, + 0, 0, &irq_domain_simple_ops, NULL); if (!lpc32xx_mic_domain) panic("Unable to add MIC irq domain\n"); + + /* MIC SUBIRQx interrupts will route handling to the chain handlers */ + irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler); + irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler); } diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 178d4daa5e1d..ebdda8346a26 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -89,6 +89,8 @@ config MACH_MMP_DT select CPU_PXA168 select CPU_PXA910 select USE_OF + select PINCTRL + select PINCTRL_SINGLE help Include support for Marvell MMP2 based platforms using the device tree. Needn't select any other machine while @@ -99,6 +101,8 @@ config MACH_MMP2_DT depends on !CPU_MOHAWK select CPU_MMP2 select USE_OF + select PINCTRL + select PINCTRL_SINGLE help Include support for Marvell MMP2 based platforms using the device tree. diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index c744946ef022..706dc5727bbe 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -4,7 +4,7 @@ menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" - select HAS_MTU + select CLKSRC_NOMADIK_MTU select NOMADIK_8815 endmenu diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index bfa1eab91f41..5ccdf53c5a9d 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -24,20 +24,17 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> +#include <linux/platform_data/clocksource-nomadik-mtu.h> +#include <linux/platform_data/mtd-nomadik-nand.h> #include <asm/hardware/vic.h> #include <asm/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/irq.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> - -#include <plat/gpio-nomadik.h> -#include <plat/mtu.h> -#include <plat/pincfg.h> - -#include <linux/platform_data/mtd-nomadik-nand.h> #include <mach/fsmc.h> +#include <mach/irqs.h> #include "cpu-8815.h" @@ -261,7 +258,7 @@ static void __init nomadik_timer_init(void) src_cr |= SRC_CR_INIT_VAL; writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); - nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE)); + nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0); } static struct sys_timer nomadik_timer = { diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index b617eaed0ce5..1273931303fb 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -26,8 +26,8 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index 6d14454d4609..0c2f6628299a 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -4,8 +4,7 @@ #include <linux/i2c-algo-bit.h> #include <linux/i2c-gpio.h> #include <linux/platform_device.h> -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> +#include <linux/platform_data/pinctrl-nomadik.h> /* * There are two busses in the 8815NHK. diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h index a118e615f865..b549d0571548 100644 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ b/arch/arm/mach-nomadik/include/mach/irqs.h @@ -72,7 +72,7 @@ #define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */ #define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET) #define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET) -#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) +#define NOMADIK_NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) /* Following two are used by entry_macro.S, to access our dual-vic */ #define VIC_REG_IRQSR0 0 diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index e067f221f0f9..560a7dcf0a56 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -307,8 +307,7 @@ static void __init omap_fsample_init(void) fsample_init_smc91x(); - if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index dcf364d1a8b1..2274bd677efc 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -412,8 +412,7 @@ static void __init h2_init(void) h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; h2_nand_resource.end += SZ_4K - 1; - if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index b3fcdedb44ca..1051935f0aac 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -406,8 +406,7 @@ static void __init h3_init(void) nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; nand_resource.end += SZ_4K - 1; - if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 9a7e483ed6fd..27f8d12ec222 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -275,8 +275,7 @@ static void __init omap_perseus2_init(void) perseus2_init_smc91x(); - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index c81bc508e7a3..be0f62bf9037 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -275,14 +275,14 @@ config MACH_NOKIA_N8X0 select OMAP_PACKAGE_ZAC config MACH_NOKIA_RM680 - bool "Nokia RM-680/696 board" + bool "Nokia N950 (RM-680) / N9 (RM-696) phones" depends on ARCH_OMAP3 default y select MACH_NOKIA_RM696 select OMAP_PACKAGE_CBB config MACH_NOKIA_RX51 - bool "Nokia RX-51 board" + bool "Nokia N900 (RX-51) phone" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 745401020c2b..a8004f33b7e2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -202,8 +202,6 @@ obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o -obj-$(CONFIG_OMAP_IOMMU) += iommu2.o - iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) @@ -297,4 +295,4 @@ endif emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o obj-y += $(emac-m) $(emac-y) -obj-y += common-board-devices.o twl-common.o +obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 85dfa71e0dc6..1cc6696594fd 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -36,9 +36,6 @@ #include "common.h" #include "omap4-keypad.h" -#include <video/omapdss.h> -#include <video/omap-panel-nokia-dsi.h> -#include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -48,17 +45,13 @@ #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "dss-common.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ -#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ -#define DLP_POWER_ON_GPIO 40 #define GPIO_WIFI_PMENA 54 #define GPIO_WIFI_IRQ 53 @@ -607,154 +600,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static struct nokia_dsi_panel_data dsi1_panel = { - .name = "taal", - .reset_gpio = 102, - .use_ext_te = false, - .ext_te_gpio = 101, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd_device = { - .name = "lcd", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi1_panel, - .phy.dsi = { - .module = 0, - }, - .channel = OMAP_DSS_CHANNEL_LCD, -}; - -static struct nokia_dsi_panel_data dsi2_panel = { - .name = "taal", - .reset_gpio = 104, - .use_ext_te = false, - .ext_te_gpio = 103, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd2_device = { - .name = "lcd2", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi2_panel, - .phy.dsi = { - - .module = 1, - }, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data sdp4430_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device sdp4430_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &sdp4430_hdmi_data, -}; - -static struct picodlp_panel_data sdp4430_picodlp_pdata = { - .picodlp_adapter_id = 2, - .emu_done_gpio = 44, - .pwrgood_gpio = 45, -}; - -static void sdp4430_picodlp_init(void) -{ - int r; - const struct gpio picodlp_gpios[] = { - {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"}, - {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, - "DLP EMU DONE"}, - {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, - "DLP PWRGOOD"}, - }; - - r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); - if (r) - pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); -} - -static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DISPLAY_SEL_GPIO, 0); - gpio_set_value(DLP_POWER_ON_GPIO, 1); - - return 0; -} - -static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DLP_POWER_ON_GPIO, 0); - gpio_set_value(DISPLAY_SEL_GPIO, 1); -} - -static struct omap_dss_device sdp4430_picodlp_device = { - .name = "picodlp", - .driver_name = "picodlp_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 24, - .channel = OMAP_DSS_CHANNEL_LCD2, - .platform_enable = sdp4430_panel_enable_picodlp, - .platform_disable = sdp4430_panel_disable_picodlp, - .data = &sdp4430_picodlp_pdata, -}; - -static struct omap_dss_device *sdp4430_dss_devices[] = { - &sdp4430_lcd_device, - &sdp4430_lcd2_device, - &sdp4430_hdmi_device, - &sdp4430_picodlp_device, -}; - -static struct omap_dss_board_info sdp4430_dss_data = { - .num_devices = ARRAY_SIZE(sdp4430_dss_devices), - .devices = sdp4430_dss_devices, - .default_device = &sdp4430_lcd_device, -}; - -static void __init omap_4430sdp_display_init(void) -{ - int r; - - /* Enable LCD2 by default (instead of Pico DLP) */ - r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, - "display_sel"); - if (r) - pr_err("%s: Could not get display_sel GPIO\n", __func__); - - sdp4430_picodlp_init(); - omap_display_init(&sdp4430_dss_data); - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index f0715a369c44..53cb380b7877 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -21,6 +21,7 @@ #include "common.h" #include "common-board-devices.h" +#include "dss-common.h" #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) #define intc_of_init NULL @@ -40,6 +41,15 @@ static void __init omap_generic_init(void) omap_sdrc_init(NULL, NULL); of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); + + /* + * HACK: call display setup code for selected boards to enable omapdss. + * This will be removed when omapdss supports DT. + */ + if (of_machine_is_compatible("ti,omap4-panda")) + omap4_panda_display_init_of(); + else if (of_machine_is_compatible("ti,omap4-sdp")) + omap_4430sdp_display_init_of(); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 12a3a24d5bb5..5c8e9cee2c2e 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -37,9 +37,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <video/omapdss.h> - -#include <video/omap-panel-tfp410.h> #include "common.h" #include "soc.h" @@ -48,14 +45,12 @@ #include "control.h" #include "mux.h" #include "common-board-devices.h" +#include "dss-common.h" #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static struct ti_st_plat_data wilink_platform_data = { @@ -409,68 +404,6 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -/* Display DVI */ -#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 - -/* Using generic display panel */ -static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, -}; - -static struct omap_dss_device omap4_panda_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &omap4_dvi_panel, - .phy.dpi.data_lines = 24, - .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device omap4_panda_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &omap4_panda_hdmi_data, -}; - -static struct omap_dss_device *omap4_panda_dss_devices[] = { - &omap4_panda_dvi_device, - &omap4_panda_hdmi_device, -}; - -static struct omap_dss_board_info omap4_panda_dss_data = { - .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), - .devices = omap4_panda_dss_devices, - .default_device = &omap4_panda_dvi_device, -}; - -static void __init omap4_panda_display_init(void) -{ - - omap_display_init(&omap4_panda_dss_data); - - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} static void omap4_panda_init_rev(void) { diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index cbcb1b2dc31f..0c777b75e484 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -1,5 +1,5 @@ /* - * Board support file for Nokia RM-680/696. + * Board support file for Nokia N950 (RM-680) / N9 (RM-696). * * Copyright (C) 2010 Nokia * diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index ee1045c0ad67..f1d6efe079ca 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap2/board-rx51.c + * Board support file for Nokia N900 (aka RX-51). * * Copyright (C) 2007, 2008 Nokia * diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 3bbcde87dead..948bcaa82eb6 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -214,6 +214,9 @@ static inline void __iomem *omap4_get_scu_base(void) #endif extern void __init gic_init_irq(void); +extern void gic_dist_disable(void); +extern bool gic_dist_disabled(void); +extern void gic_timer_retrigger(void); extern void omap_smc1(u32 fn, u32 arg); extern void __iomem *omap4_get_sar_ram_base(void); extern void omap_do_wfi(void); @@ -221,6 +224,7 @@ extern void omap_do_wfi(void); #ifdef CONFIG_SMP /* Needed for secondary core boot */ extern void omap_secondary_startup(void); +extern void omap_secondary_startup_4460(void); extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); extern u32 omap_read_auxcoreboot0(void); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index cafe04660a4b..c67a731cfbb7 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -129,7 +129,7 @@ static struct platform_device omap2cam_device = { #if defined(CONFIG_IOMMU_API) -#include <plat/iommu.h> +#include <linux/platform_data/iommu-omap.h> static struct resource omap3isp_resources[] = { { diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 6282cc826613..fce5aa3fff49 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -23,15 +23,20 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/omap_drm.h> #include "omap_device.h" #include "omap_hwmod.h" +#include <plat/cpu.h> #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) +static struct omap_drm_platform_data platform_data; + static struct platform_device omap_drm_device = { .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &platform_data, }, .name = "omapdrm", .id = 0, @@ -52,6 +57,8 @@ static int __init omap_init_drm(void) oh->name); } + platform_data.omaprev = GET_OMAP_REVISION(); + return platform_device_register(&omap_drm_device); } diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c new file mode 100644 index 000000000000..679a0478644f --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.c @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2012 Texas Instruments, Inc.. + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> + +#include <video/omapdss.h> +#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-nokia-dsi.h> +#include <video/omap-panel-picodlp.h> + +#include <plat/cpu.h> + +#include "dss-common.h" +#include "mux.h" + +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ +#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ + +/* Display DVI */ +#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 + +/* Using generic display panel */ +static struct tfp410_platform_data omap4_dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, +}; + +static struct omap_dss_device omap4_panda_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "tfp410", + .data = &omap4_dvi_panel, + .phy.dpi.data_lines = 24, + .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device omap4_panda_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, +}; + +static struct omap_dss_device *omap4_panda_dss_devices[] = { + &omap4_panda_dvi_device, + &omap4_panda_hdmi_device, +}; + +static struct omap_dss_board_info omap4_panda_dss_data = { + .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), + .devices = omap4_panda_dss_devices, + .default_device = &omap4_panda_dvi_device, +}; + +void __init omap4_panda_display_init(void) +{ + omap_display_init(&omap4_panda_dss_data); + + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap4_panda_display_init_of(void) +{ + omap_display_init(&omap4_panda_dss_data); +} + + +/* OMAP4 Blaze display data */ + +#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ +#define DLP_POWER_ON_GPIO 40 + +static struct nokia_dsi_panel_data dsi1_panel = { + .name = "taal", + .reset_gpio = 102, + .use_ext_te = false, + .ext_te_gpio = 101, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd_device = { + .name = "lcd", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi1_panel, + .phy.dsi = { + .module = 0, + }, + .channel = OMAP_DSS_CHANNEL_LCD, +}; + +static struct nokia_dsi_panel_data dsi2_panel = { + .name = "taal", + .reset_gpio = 104, + .use_ext_te = false, + .ext_te_gpio = 103, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd2_device = { + .name = "lcd2", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi2_panel, + .phy.dsi = { + + .module = 1, + }, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device sdp4430_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, +}; + +static struct picodlp_panel_data sdp4430_picodlp_pdata = { + .picodlp_adapter_id = 2, + .emu_done_gpio = 44, + .pwrgood_gpio = 45, +}; + +static void sdp4430_picodlp_init(void) +{ + int r; + const struct gpio picodlp_gpios[] = { + {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"}, + {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, + "DLP EMU DONE"}, + {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, + "DLP PWRGOOD"}, + }; + + r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); + if (r) + pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); +} + +static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DISPLAY_SEL_GPIO, 0); + gpio_set_value(DLP_POWER_ON_GPIO, 1); + + return 0; +} + +static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DLP_POWER_ON_GPIO, 0); + gpio_set_value(DISPLAY_SEL_GPIO, 1); +} + +static struct omap_dss_device sdp4430_picodlp_device = { + .name = "picodlp", + .driver_name = "picodlp_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .channel = OMAP_DSS_CHANNEL_LCD2, + .platform_enable = sdp4430_panel_enable_picodlp, + .platform_disable = sdp4430_panel_disable_picodlp, + .data = &sdp4430_picodlp_pdata, +}; + +static struct omap_dss_device *sdp4430_dss_devices[] = { + &sdp4430_lcd_device, + &sdp4430_lcd2_device, + &sdp4430_hdmi_device, + &sdp4430_picodlp_device, +}; + +static struct omap_dss_board_info sdp4430_dss_data = { + .num_devices = ARRAY_SIZE(sdp4430_dss_devices), + .devices = sdp4430_dss_devices, + .default_device = &sdp4430_lcd_device, +}; + +void __init omap_4430sdp_display_init(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap_4430sdp_display_init_of(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); +} diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h new file mode 100644 index 000000000000..915f6fff5106 --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.h @@ -0,0 +1,14 @@ +#ifndef __OMAP_DSS_COMMON__ +#define __OMAP_DSS_COMMON__ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +void __init omap4_panda_display_init(void); +void __init omap4_panda_display_init_of(void); +void __init omap_4430sdp_display_init(void); +void __init omap_4430sdp_display_init_of(void); + +#endif diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c deleted file mode 100644 index eefc37912ef3..000000000000 --- a/arch/arm/mach-omap2/iommu2.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * omap iommu: omap2/3 architecture specific functions - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, - * Paul Mundt and Toshihiro Kobayashi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/err.h> -#include <linux/device.h> -#include <linux/jiffies.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/stringify.h> - -#include <plat/iommu.h> - -/* - * omap2 architecture specific register bit definitions - */ -#define IOMMU_ARCH_VERSION 0x00000011 - -/* SYSCONF */ -#define MMU_SYS_IDLE_SHIFT 3 -#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT) - -#define MMU_SYS_SOFTRESET (1 << 1) -#define MMU_SYS_AUTOIDLE 1 - -/* SYSSTATUS */ -#define MMU_SYS_RESETDONE 1 - -/* IRQSTATUS & IRQENABLE */ -#define MMU_IRQ_MULTIHITFAULT (1 << 4) -#define MMU_IRQ_TABLEWALKFAULT (1 << 3) -#define MMU_IRQ_EMUMISS (1 << 2) -#define MMU_IRQ_TRANSLATIONFAULT (1 << 1) -#define MMU_IRQ_TLBMISS (1 << 0) - -#define __MMU_IRQ_FAULT \ - (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT) -#define MMU_IRQ_MASK \ - (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS) -#define MMU_IRQ_TWL_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT) -#define MMU_IRQ_TLB_MISS_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS) - -/* MMU_CNTL */ -#define MMU_CNTL_SHIFT 1 -#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT) -#define MMU_CNTL_EML_TLB (1 << 3) -#define MMU_CNTL_TWL_EN (1 << 2) -#define MMU_CNTL_MMU_EN (1 << 1) - -#define get_cam_va_mask(pgsz) \ - (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \ - ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \ - ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \ - ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) - - -static void __iommu_set_twl(struct omap_iommu *obj, bool on) -{ - u32 l = iommu_read_reg(obj, MMU_CNTL); - - if (on) - iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE); - else - iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE); - - l &= ~MMU_CNTL_MASK; - if (on) - l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); - else - l |= (MMU_CNTL_MMU_EN); - - iommu_write_reg(obj, l, MMU_CNTL); -} - - -static int omap2_iommu_enable(struct omap_iommu *obj) -{ - u32 l, pa; - unsigned long timeout; - - if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K)) - return -EINVAL; - - pa = virt_to_phys(obj->iopgd); - if (!IS_ALIGNED(pa, SZ_16K)) - return -EINVAL; - - iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG); - - timeout = jiffies + msecs_to_jiffies(20); - do { - l = iommu_read_reg(obj, MMU_SYSSTATUS); - if (l & MMU_SYS_RESETDONE) - break; - } while (!time_after(jiffies, timeout)); - - if (!(l & MMU_SYS_RESETDONE)) { - dev_err(obj->dev, "can't take mmu out of reset\n"); - return -ENODEV; - } - - l = iommu_read_reg(obj, MMU_REVISION); - dev_info(obj->dev, "%s: version %d.%d\n", obj->name, - (l >> 4) & 0xf, l & 0xf); - - l = iommu_read_reg(obj, MMU_SYSCONFIG); - l &= ~MMU_SYS_IDLE_MASK; - l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE); - iommu_write_reg(obj, l, MMU_SYSCONFIG); - - iommu_write_reg(obj, pa, MMU_TTB); - - __iommu_set_twl(obj, true); - - return 0; -} - -static void omap2_iommu_disable(struct omap_iommu *obj) -{ - u32 l = iommu_read_reg(obj, MMU_CNTL); - - l &= ~MMU_CNTL_MASK; - iommu_write_reg(obj, l, MMU_CNTL); - iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG); - - dev_dbg(obj->dev, "%s is shutting down\n", obj->name); -} - -static void omap2_iommu_set_twl(struct omap_iommu *obj, bool on) -{ - __iommu_set_twl(obj, false); -} - -static u32 omap2_iommu_fault_isr(struct omap_iommu *obj, u32 *ra) -{ - u32 stat, da; - u32 errs = 0; - - stat = iommu_read_reg(obj, MMU_IRQSTATUS); - stat &= MMU_IRQ_MASK; - if (!stat) { - *ra = 0; - return 0; - } - - da = iommu_read_reg(obj, MMU_FAULT_AD); - *ra = da; - - if (stat & MMU_IRQ_TLBMISS) - errs |= OMAP_IOMMU_ERR_TLB_MISS; - if (stat & MMU_IRQ_TRANSLATIONFAULT) - errs |= OMAP_IOMMU_ERR_TRANS_FAULT; - if (stat & MMU_IRQ_EMUMISS) - errs |= OMAP_IOMMU_ERR_EMU_MISS; - if (stat & MMU_IRQ_TABLEWALKFAULT) - errs |= OMAP_IOMMU_ERR_TBLWALK_FAULT; - if (stat & MMU_IRQ_MULTIHITFAULT) - errs |= OMAP_IOMMU_ERR_MULTIHIT_FAULT; - iommu_write_reg(obj, stat, MMU_IRQSTATUS); - - return errs; -} - -static void omap2_tlb_read_cr(struct omap_iommu *obj, struct cr_regs *cr) -{ - cr->cam = iommu_read_reg(obj, MMU_READ_CAM); - cr->ram = iommu_read_reg(obj, MMU_READ_RAM); -} - -static void omap2_tlb_load_cr(struct omap_iommu *obj, struct cr_regs *cr) -{ - iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM); - iommu_write_reg(obj, cr->ram, MMU_RAM); -} - -static u32 omap2_cr_to_virt(struct cr_regs *cr) -{ - u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK; - u32 mask = get_cam_va_mask(cr->cam & page_size); - - return cr->cam & mask; -} - -static struct cr_regs *omap2_alloc_cr(struct omap_iommu *obj, - struct iotlb_entry *e) -{ - struct cr_regs *cr; - - if (e->da & ~(get_cam_va_mask(e->pgsz))) { - dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__, - e->da); - return ERR_PTR(-EINVAL); - } - - cr = kmalloc(sizeof(*cr), GFP_KERNEL); - if (!cr) - return ERR_PTR(-ENOMEM); - - cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid; - cr->ram = e->pa | e->endian | e->elsz | e->mixed; - - return cr; -} - -static inline int omap2_cr_valid(struct cr_regs *cr) -{ - return cr->cam & MMU_CAM_V; -} - -static u32 omap2_get_pte_attr(struct iotlb_entry *e) -{ - u32 attr; - - attr = e->mixed << 5; - attr |= e->endian; - attr |= e->elsz >> 3; - attr <<= (((e->pgsz == MMU_CAM_PGSZ_4K) || - (e->pgsz == MMU_CAM_PGSZ_64K)) ? 0 : 6); - return attr; -} - -static ssize_t -omap2_dump_cr(struct omap_iommu *obj, struct cr_regs *cr, char *buf) -{ - char *p = buf; - - /* FIXME: Need more detail analysis of cam/ram */ - p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram, - (cr->cam & MMU_CAM_P) ? 1 : 0); - - return p - buf; -} - -#define pr_reg(name) \ - do { \ - ssize_t bytes; \ - const char *str = "%20s: %08x\n"; \ - const int maxcol = 32; \ - bytes = snprintf(p, maxcol, str, __stringify(name), \ - iommu_read_reg(obj, MMU_##name)); \ - p += bytes; \ - len -= bytes; \ - if (len < maxcol) \ - goto out; \ - } while (0) - -static ssize_t -omap2_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len) -{ - char *p = buf; - - pr_reg(REVISION); - pr_reg(SYSCONFIG); - pr_reg(SYSSTATUS); - pr_reg(IRQSTATUS); - pr_reg(IRQENABLE); - pr_reg(WALKING_ST); - pr_reg(CNTL); - pr_reg(FAULT_AD); - pr_reg(TTB); - pr_reg(LOCK); - pr_reg(LD_TLB); - pr_reg(CAM); - pr_reg(RAM); - pr_reg(GFLUSH); - pr_reg(FLUSH_ENTRY); - pr_reg(READ_CAM); - pr_reg(READ_RAM); - pr_reg(EMU_FAULT_AD); -out: - return p - buf; -} - -static void omap2_iommu_save_ctx(struct omap_iommu *obj) -{ - int i; - u32 *p = obj->ctx; - - for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { - p[i] = iommu_read_reg(obj, i * sizeof(u32)); - dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); - } - - BUG_ON(p[0] != IOMMU_ARCH_VERSION); -} - -static void omap2_iommu_restore_ctx(struct omap_iommu *obj) -{ - int i; - u32 *p = obj->ctx; - - for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { - iommu_write_reg(obj, p[i], i * sizeof(u32)); - dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); - } - - BUG_ON(p[0] != IOMMU_ARCH_VERSION); -} - -static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) -{ - e->da = cr->cam & MMU_CAM_VATAG_MASK; - e->pa = cr->ram & MMU_RAM_PADDR_MASK; - e->valid = cr->cam & MMU_CAM_V; - e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK; - e->endian = cr->ram & MMU_RAM_ENDIAN_MASK; - e->elsz = cr->ram & MMU_RAM_ELSZ_MASK; - e->mixed = cr->ram & MMU_RAM_MIXED; -} - -static const struct iommu_functions omap2_iommu_ops = { - .version = IOMMU_ARCH_VERSION, - - .enable = omap2_iommu_enable, - .disable = omap2_iommu_disable, - .set_twl = omap2_iommu_set_twl, - .fault_isr = omap2_iommu_fault_isr, - - .tlb_read_cr = omap2_tlb_read_cr, - .tlb_load_cr = omap2_tlb_load_cr, - - .cr_to_e = omap2_cr_to_e, - .cr_to_virt = omap2_cr_to_virt, - .alloc_cr = omap2_alloc_cr, - .cr_valid = omap2_cr_valid, - .dump_cr = omap2_dump_cr, - - .get_pte_attr = omap2_get_pte_attr, - - .save_ctx = omap2_iommu_save_ctx, - .restore_ctx = omap2_iommu_restore_ctx, - .dump_ctx = omap2_iommu_dump_ctx, -}; - -static int __init omap2_iommu_init(void) -{ - return omap_install_iommu_arch(&omap2_iommu_ops); -} -module_init(omap2_iommu_init); - -static void __exit omap2_iommu_exit(void) -{ - omap_uninstall_iommu_arch(&omap2_iommu_ops); -} -module_exit(omap2_iommu_exit); - -MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); -MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 502e3135aad3..0ea09faf327b 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -18,6 +18,8 @@ #include <linux/linkage.h> #include <linux/init.h> +#include "omap44xx.h" + __CPUINIT /* Physical address needed since MMU not enabled yet on secondary core */ @@ -64,3 +66,39 @@ hold: ldr r12,=0x103 b secondary_startup ENDPROC(omap_secondary_startup) +ENTRY(omap_secondary_startup_4460) +hold_2: ldr r12,=0x103 + dsb + smc #0 @ read from AuxCoreBoot0 + mov r0, r0, lsr #9 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 + bne hold_2 + + /* + * GIC distributor control register has changed between + * CortexA9 r1pX and r2pX. The Control Register secure + * banked version is now composed of 2 bits: + * bit 0 == Secure Enable + * bit 1 == Non-Secure Enable + * The Non-Secure banked register has not changed + * Because the ROM Code is based on the r1pX GIC, the CPU1 + * GIC restoration will cause a problem to CPU0 Non-Secure SW. + * The workaround must be: + * 1) Before doing the CPU1 wakeup, CPU0 must disable + * the GIC distributor + * 2) CPU1 must re-enable the GIC distributor on + * it's wakeup path. + */ + ldr r1, =OMAP44XX_GIC_DIST_BASE + ldr r0, [r1] + orr r0, #1 + str r0, [r1] + + /* + * we've been released from the wait loop,secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup +ENDPROC(omap_secondary_startup_4460) diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index df298d46707c..a6a4ff8744b7 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -13,7 +13,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <plat/iommu.h> +#include <linux/platform_data/iommu-omap.h> #include "soc.h" #include "common.h" diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 3f5fd7e3549d..aac46bfdbeb2 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -68,6 +68,7 @@ struct omap4_cpu_pm_info { void __iomem *scu_sar_addr; void __iomem *wkup_sar_addr; void __iomem *l2x0_sar_addr; + void (*secondary_startup)(void); }; static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); @@ -300,6 +301,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { unsigned int cpu_state = 0; + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; @@ -309,7 +311,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) clear_cpu_prev_pwrst(cpu); set_cpu_next_pwrst(cpu, power_state); - set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup)); + set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); scu_pwrst_prepare(cpu, power_state); /* @@ -360,6 +362,11 @@ int __init omap4_mpuss_init(void) pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; + if (cpu_is_omap446x()) + pm_info->secondary_startup = omap_secondary_startup_4460; + else + pm_info->secondary_startup = omap_secondary_startup; + pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); if (!pm_info->pwrdm) { pr_err("Lookup failed for CPU1 pwrdm\n"); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4d05fa8a4e48..cd42d921940d 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -32,6 +32,7 @@ #include "iomap.h" #include "common.h" #include "clockdomain.h" +#include "pm.h" #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410FC090 @@ -39,6 +40,8 @@ #define OMAP5_CORE_COUNT 0x2 +u16 pm44xx_errata; + /* SCU base address */ static void __iomem *scu_base; @@ -118,8 +121,37 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * * 4.3.4.2 Power States of CPU0 and CPU1 */ if (booted) { + /* + * GIC distributor control register has changed between + * CortexA9 r1pX and r2pX. The Control Register secure + * banked version is now composed of 2 bits: + * bit 0 == Secure Enable + * bit 1 == Non-Secure Enable + * The Non-Secure banked register has not changed + * Because the ROM Code is based on the r1pX GIC, the CPU1 + * GIC restoration will cause a problem to CPU0 Non-Secure SW. + * The workaround must be: + * 1) Before doing the CPU1 wakeup, CPU0 must disable + * the GIC distributor + * 2) CPU1 must re-enable the GIC distributor on + * it's wakeup path. + */ + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { + local_irq_disable(); + gic_dist_disable(); + } + clkdm_wakeup(cpu1_clkdm); clkdm_allow_idle(cpu1_clkdm); + + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { + while (gic_dist_disabled()) { + udelay(1); + cpu_relax(); + } + gic_timer_retrigger(); + local_irq_enable(); + } } else { dsb_sev(); booted = true; @@ -138,7 +170,14 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * static void __init wakeup_secondary(void) { + void *startup_addr = omap_secondary_startup; void __iomem *base = omap_get_wakeupgen_base(); + + if (cpu_is_omap446x()) { + startup_addr = omap_secondary_startup_4460; + pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; + } + /* * Write the address of secondary startup routine into the * AuxCoreBoot1 where ROM code will jump and start executing @@ -146,7 +185,7 @@ static void __init wakeup_secondary(void) * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) - omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); + omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else __raw_writel(virt_to_phys(omap5_secondary_startup), base + OMAP_AUX_CORE_BOOT_1); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 5695885ea340..6897ae21bb82 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> #include <linux/platform_device.h> #include <linux/memblock.h> #include <linux/of_irq.h> @@ -24,6 +25,7 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> +#include <asm/smp_twd.h> #include "omap-wakeupgen.h" #include "soc.h" @@ -42,6 +44,10 @@ static void __iomem *l2cache_base; #endif static void __iomem *sar_ram_base; +static void __iomem *gic_dist_base_addr; +static void __iomem *twd_base; + +#define IRQ_LOCALTIMER 29 #ifdef CONFIG_OMAP4_ERRATA_I688 /* Used to implement memory barrier on DRAM path */ @@ -96,12 +102,14 @@ void __init omap_barriers_init(void) void __init gic_init_irq(void) { void __iomem *omap_irq_base; - void __iomem *gic_dist_base_addr; /* Static mapping, never released */ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); BUG_ON(!gic_dist_base_addr); + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K); + BUG_ON(!twd_base); + /* Static mapping, never released */ omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); BUG_ON(!omap_irq_base); @@ -111,6 +119,38 @@ void __init gic_init_irq(void) gic_init(0, 29, gic_dist_base_addr, omap_irq_base); } +void gic_dist_disable(void) +{ + if (gic_dist_base_addr) + __raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL); +} + +bool gic_dist_disabled(void) +{ + return !(__raw_readl(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); +} + +void gic_timer_retrigger(void) +{ + u32 twd_int = __raw_readl(twd_base + TWD_TIMER_INTSTAT); + u32 gic_int = __raw_readl(gic_dist_base_addr + GIC_DIST_PENDING_SET); + u32 twd_ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + + if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) { + /* + * The local timer interrupt got lost while the distributor was + * disabled. Ack the pending interrupt, and retrigger it. + */ + pr_warn("%s: lost localtimer interrupt\n", __func__); + __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) { + __raw_writel(1, twd_base + TWD_TIMER_COUNTER); + twd_ctrl |= TWD_TIMER_CONTROL_ENABLE; + __raw_writel(twd_ctrl, twd_base + TWD_TIMER_CONTROL); + } + } +} + #ifdef CONFIG_CACHE_L2X0 void __iomem *omap4_get_l2cache_base(void) diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index ad8d43b33273..32820d89f5b4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -674,6 +674,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { .name = "cpgmac0", .class = &am33xx_cpgmac0_hwmod_class, .clkdm_name = "cpsw_125mhz_clkdm", + .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), .mpu_irqs = am33xx_cpgmac0_irqs, .main_clk = "cpsw_125mhz_gclk", .prcm = { @@ -685,6 +686,20 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { }; /* + * mdio class + */ +static struct omap_hwmod_class am33xx_mdio_hwmod_class = { + .name = "davinci_mdio", +}; + +static struct omap_hwmod am33xx_mdio_hwmod = { + .name = "davinci_mdio", + .class = &am33xx_mdio_hwmod_class, + .clkdm_name = "cpsw_125mhz_clkdm", + .main_clk = "cpsw_125mhz_gclk", +}; + +/* * dcan class */ static struct omap_hwmod_class am33xx_dcan_hwmod_class = { @@ -2501,6 +2516,21 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = { .user = OCP_USER_MPU, }; +struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = { + { + .pa_start = 0x4A101000, + .pa_end = 0x4A101000 + SZ_256 - 1, + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { + .master = &am33xx_cpgmac0_hwmod, + .slave = &am33xx_mdio_hwmod, + .addr = am33xx_mdio_addr_space, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = { { .pa_start = 0x48080000, @@ -3371,6 +3401,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__tptc2, &am33xx_l3_s__usbss, &am33xx_l4_hs__cpgmac0, + &am33xx_cpgmac0__mdio, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 0f10919f227f..ec4499e5a4c9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -24,8 +24,8 @@ #include "l4_3xxx.h" #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> -#include <plat/iommu.h> #include "am35xx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index ce1661d18e56..eb61cfd9452b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -29,8 +29,8 @@ #include <linux/platform_data/omap_ocp2scp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> +#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> -#include <plat/iommu.h> #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 02c291c8e470..c22503b17abd 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -102,6 +102,15 @@ extern void enable_omap3630_toggle_l2_on_restore(void); static inline void enable_omap3630_toggle_l2_on_restore(void) { } #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */ +#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0) + +#if defined(CONFIG_ARCH_OMAP4) +extern u16 pm44xx_errata; +#define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id)) +#else +#define IS_PM44XX_ERRATUM(id) 0 +#endif + #ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 3cf79b54ce61..250d909e38bd 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -58,8 +58,6 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) if (IS_ERR(omap_pmu_dev)) return PTR_ERR(omap_pmu_dev); - pm_runtime_enable(&omap_pmu_dev->dev); - return 0; } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b9cff72ceaec..7016637b531c 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -628,9 +628,9 @@ static void __init omap4_local_timer_init(void) } } #else /* CONFIG_LOCAL_TIMERS */ -static inline void omap4_local_timer_init(void) +static void __init omap4_local_timer_init(void) { - omap4_sync32_timer_init(); + omap4_sync32k_timer_init(); } #endif /* CONFIG_LOCAL_TIMERS */ OMAP_SYS_TIMER(4, local); diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h index 2f82332e81a0..9a827e32db98 100644 --- a/arch/arm/mach-pxa/include/mach/udc.h +++ b/arch/arm/mach-pxa/include/mach/udc.h @@ -2,7 +2,7 @@ * arch/arm/mach-pxa/include/mach/udc.h * */ -#include <asm/mach/udc_pxa2xx.h> +#include <linux/platform_data/pxa2xx_udc.h> extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 3352b37b60cf..3f5171eaf67b 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -209,6 +209,7 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = @@ -338,6 +339,10 @@ void __init pxa25x_map_io(void) pxa25x_get_clk_frequency_khz(1); } +static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = { + .gpio_set_wake = gpio_set_wake, +}; + static struct platform_device *pxa25x_devices[] __initdata = { &pxa25x_device_udc, &pxa_device_pmu, @@ -370,6 +375,7 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); + pxa_register_device(&pxa_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); if (ret) diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index d3b3cd216d64..28511d43637a 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -467,6 +467,7 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, + .smp = smp_ops(realview_smp_ops), .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 2b6cb5f29c2d..25df14a9e268 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -400,11 +400,12 @@ config MACH_MINI2440 bool "MINI2440 development board" select EEPROM_AT24 select LEDS_CLASS - select LEDS_TRIGGER + select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT select NEW_LEDS select S3C_DEV_NAND select S3C_DEV_USB_HOST + select S3C_SETUP_CAMIF help Say Y here to select support for the MINI2440. Is a 10cm x 10cm board available via various sources. It can come with a 3.5" or 7" touch LCD. diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 4407b1730539..04b87ec92537 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -161,6 +161,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), + CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), }; static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 63e7ae3ee9e6..131c86284711 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -294,6 +294,7 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_SPI select S3C64XX_SETUP_USB_PHY + select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -304,6 +305,7 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_WDT select SAMSUNG_DEV_ADC select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select SAMSUNG_GPIO_EXTRA128 help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 4e3fe57674c8..c6d8dba90623 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -20,6 +20,8 @@ #include <linux/regulator/machine.h> +#include <sound/wm0010.h> +#include <sound/wm2200.h> #include <sound/wm5100.h> #include <sound/wm8996.h> #include <sound/wm8962.h> @@ -33,14 +35,34 @@ static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { .line = S3C64XX_GPC(3), }; +static struct wm0010_pdata wm0010_pdata = { + .gpio_reset = S3C64XX_GPN(6), + .reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */ +}; + static struct spi_board_info wm1253_devs[] = { [0] = { .modalias = "wm0010", + .max_speed_hz = 26 * 1000 * 1000, .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, .irq = S3C_EINT(5), .controller_data = &wm0010_spi_csinfo, + .platform_data = &wm0010_pdata, + }, +}; + +static struct spi_board_info balblair_devs[] = { + [0] = { + .modalias = "wm0010", + .max_speed_hz = 26 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .irq = S3C_EINT(4), + .controller_data = &wm0010_spi_csinfo, + .platform_data = &wm0010_pdata, }, }; @@ -166,12 +188,13 @@ static struct regulator_init_data wm8994_ldo2 = { static struct wm8994_pdata wm8994_pdata = { .gpio_base = CODEC_GPIO_BASE, + .micb2_delay = 150, .gpio_defaults = { 0x3, /* IRQ out, active high, CMOS */ }, .ldo = { - { .init_data = &wm8994_ldo1, }, - { .init_data = &wm8994_ldo2, }, + { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, }, + { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, }, }, }; @@ -182,7 +205,7 @@ static const struct i2c_board_info wm1277_devs[] = { }, }; -static struct arizona_pdata wm5102_pdata = { +static struct arizona_pdata wm5102_reva_pdata = { .ldoena = S3C64XX_GPN(7), .gpio_base = CODEC_GPIO_BASE, .irq_active_high = true, @@ -193,64 +216,131 @@ static struct arizona_pdata wm5102_pdata = { }, }; -static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = { +static struct s3c64xx_spi_csinfo codec_spi_csinfo = { .line = S3C64XX_GPN(5), }; +static struct spi_board_info wm5102_reva_spi_devs[] = { + [0] = { + .modalias = "wm5102", + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + + WM831X_IRQ_GPIO_2, + .controller_data = &codec_spi_csinfo, + .platform_data = &wm5102_reva_pdata, + }, +}; + +static struct arizona_pdata wm5102_pdata = { + .ldoena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .irq_active_high = true, + .micd_pol_gpio = CODEC_GPIO_BASE + 2, + .gpio_defaults = { + [2] = 0x10000, /* AIF3TXLRCLK */ + [3] = 0x4, /* OPCLK */ + }, +}; + static struct spi_board_info wm5102_spi_devs[] = { [0] = { .modalias = "wm5102", .max_speed_hz = 10 * 1000 * 1000, .bus_num = 0, - .chip_select = 0, + .chip_select = 1, .mode = SPI_MODE_0, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - .controller_data = &wm5102_spi_csinfo, + .controller_data = &codec_spi_csinfo, .platform_data = &wm5102_pdata, }, }; +static struct spi_board_info wm5110_spi_devs[] = { + [0] = { + .modalias = "wm5110", + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + + WM831X_IRQ_GPIO_2, + .controller_data = &codec_spi_csinfo, + .platform_data = &wm5102_reva_pdata, + }, +}; + static const struct i2c_board_info wm6230_i2c_devs[] = { { I2C_BOARD_INFO("wm9081", 0x6c), .platform_data = &wm9081_pdata, }, }; +static struct wm2200_pdata wm2200_pdata = { + .ldo_ena = S3C64XX_GPN(7), + .gpio_defaults = { + [2] = 0x0005, /* GPIO3 24.576MHz output clock */ + }, +}; + +static const struct i2c_board_info wm2200_i2c[] = { + { I2C_BOARD_INFO("wm2200", 0x3a), + .platform_data = &wm2200_pdata, }, +}; + static __devinitdata const struct { u8 id; + u8 rev; const char *name; const struct i2c_board_info *i2c_devs; int num_i2c_devs; const struct spi_board_info *spi_devs; int num_spi_devs; } gf_mods[] = { - { .id = 0x01, .name = "1250-EV1 Springbank" }, - { .id = 0x02, .name = "1251-EV1 Jura" }, - { .id = 0x03, .name = "1252-EV1 Glenlivet" }, - { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, - { .id = 0x14, .name = "6271-EV1 Lochnagar" }, - { .id = 0x15, .name = "6320-EV1 Bells", + { .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" }, + { .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" }, + { .id = 0x03, .rev = 0xff, .name = "1252-EV1 Glenlivet" }, + { .id = 0x06, .rev = 0xff, .name = "WM8997-6721-CS96-EV1 Lapraoig" }, + { .id = 0x07, .rev = 0xff, .name = "WM5110-6271 Deanston", + .spi_devs = wm5110_spi_devs, + .num_spi_devs = ARRAY_SIZE(wm5110_spi_devs) }, + { .id = 0x08, .rev = 0xff, .name = "WM8903-6102 Tamdhu" }, + { .id = 0x09, .rev = 0xff, .name = "WM1811A-6305 Adelphi" }, + { .id = 0x0a, .rev = 0xff, .name = "WM8996-6272 Blackadder" }, + { .id = 0x0b, .rev = 0xff, .name = "WM8994-6235 Benromach" }, + { .id = 0x11, .rev = 0xff, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x14, .rev = 0xff, .name = "6271-EV1 Lochnagar" }, + { .id = 0x15, .rev = 0xff, .name = "6320-EV1 Bells", .i2c_devs = wm6230_i2c_devs, .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) }, - { .id = 0x21, .name = "1275-EV1 Mortlach" }, - { .id = 0x25, .name = "1274-EV1 Glencadam" }, - { .id = 0x31, .name = "1253-EV1 Tomatin", + { .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" }, + { .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" }, + { .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin", .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) }, - { .id = 0x32, .name = "XXXX-EV1 Caol Illa" }, - { .id = 0x33, .name = "XXXX-EV1 Oban" }, - { .id = 0x34, .name = "WM0010-6320-CS42 Balblair" }, - { .id = 0x39, .name = "1254-EV1 Dallas Dhu", + { .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" }, + { .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" }, + { .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair", + .spi_devs = balblair_devs, + .num_spi_devs = ARRAY_SIZE(balblair_devs) }, + { .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu", .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, - { .id = 0x3a, .name = "1259-EV1 Tobermory", + { .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory", .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) }, - { .id = 0x3b, .name = "1255-EV1 Kilchoman", + { .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman", .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, - { .id = 0x3c, .name = "1273-EV1 Longmorn" }, - { .id = 0x3d, .name = "1277-EV1 Littlemill", + { .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" }, + { .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill", .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, - { .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut", + { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut", + .spi_devs = wm5102_reva_spi_devs, + .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs) }, + { .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut", .spi_devs = wm5102_spi_devs, .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) }, + { .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1", + .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) }, }; static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, @@ -267,7 +357,8 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, id = (ret & 0xfe) >> 2; rev = ret & 0x3; for (i = 0; i < ARRAY_SIZE(gf_mods); i++) - if (id == gf_mods[i].id) + if (id == gf_mods[i].id && (gf_mods[i].rev == 0xff || + rev == gf_mods[i].rev)) break; if (i < ARRAY_SIZE(gf_mods)) { diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 13b7eaa45fd0..701f421de1a8 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -287,16 +287,21 @@ static struct platform_device littlemill_device = { .id = -1, }; -static struct platform_device bells_wm5102_device = { +static struct platform_device bells_wm2200_device = { .name = "bells", .id = 0, }; -static struct platform_device bells_wm5110_device = { +static struct platform_device bells_wm5102_device = { .name = "bells", .id = 1, }; +static struct platform_device bells_wm5110_device = { + .name = "bells", + .id = 2, +}; + static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD", "1-001a"), REGULATOR_SUPPLY("SPKVDD1", "1-001a"), @@ -304,6 +309,13 @@ static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDDL", "1-001a"), REGULATOR_SUPPLY("SPKVDDR", "1-001a"), + REGULATOR_SUPPLY("SPKVDDL", "spi0.1"), + REGULATOR_SUPPLY("SPKVDDR", "spi0.1"), + REGULATOR_SUPPLY("SPKVDDL", "wm5102-codec"), + REGULATOR_SUPPLY("SPKVDDR", "wm5102-codec"), + REGULATOR_SUPPLY("SPKVDDL", "wm5110-codec"), + REGULATOR_SUPPLY("SPKVDDR", "wm5110-codec"), + REGULATOR_SUPPLY("DC1VDD", "0-0034"), REGULATOR_SUPPLY("DC2VDD", "0-0034"), REGULATOR_SUPPLY("DC3VDD", "0-0034"), @@ -321,6 +333,16 @@ static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("DC1VDD", "1-0034"), REGULATOR_SUPPLY("DC2VDD", "1-0034"), REGULATOR_SUPPLY("DC3VDD", "1-0034"), + REGULATOR_SUPPLY("LDO1VDD", "1-0034"), + REGULATOR_SUPPLY("LDO2VDD", "1-0034"), + REGULATOR_SUPPLY("LDO4VDD", "1-0034"), + REGULATOR_SUPPLY("LDO5VDD", "1-0034"), + REGULATOR_SUPPLY("LDO6VDD", "1-0034"), + REGULATOR_SUPPLY("LDO7VDD", "1-0034"), + REGULATOR_SUPPLY("LDO8VDD", "1-0034"), + REGULATOR_SUPPLY("LDO9VDD", "1-0034"), + REGULATOR_SUPPLY("LDO10VDD", "1-0034"), + REGULATOR_SUPPLY("LDO11VDD", "1-0034"), }; static struct regulator_init_data wallvdd_data = { @@ -369,6 +391,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &tobermory_device, &littlemill_device, &lowland_device, + &bells_wm2200_device, &bells_wm5102_device, &bells_wm5110_device, &wallvdd_device, @@ -597,6 +620,7 @@ static struct s3c2410_platform_i2c i2c0_pdata = { static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = { REGULATOR_SUPPLY("DCVDD", "spi0.0"), REGULATOR_SUPPLY("AVDD", "spi0.0"), + REGULATOR_SUPPLY("AVDD", "spi0.1"), }; static struct regulator_init_data pvdd_1v2 __devinitdata = { @@ -621,6 +645,24 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = { REGULATOR_SUPPLY("DCVDD", "1-001a"), REGULATOR_SUPPLY("AVDD", "1-001a"), REGULATOR_SUPPLY("DBVDD", "spi0.0"), + + REGULATOR_SUPPLY("DBVDD", "1-003a"), + REGULATOR_SUPPLY("LDOVDD", "1-003a"), + REGULATOR_SUPPLY("CPVDD", "1-003a"), + REGULATOR_SUPPLY("AVDD", "1-003a"), + REGULATOR_SUPPLY("DBVDD1", "spi0.1"), + REGULATOR_SUPPLY("DBVDD2", "spi0.1"), + REGULATOR_SUPPLY("DBVDD3", "spi0.1"), + REGULATOR_SUPPLY("LDOVDD", "spi0.1"), + REGULATOR_SUPPLY("CPVDD", "spi0.1"), + + REGULATOR_SUPPLY("DBVDD2", "wm5102-codec"), + REGULATOR_SUPPLY("DBVDD3", "wm5102-codec"), + REGULATOR_SUPPLY("CPVDD", "wm5102-codec"), + + REGULATOR_SUPPLY("DBVDD2", "wm5110-codec"), + REGULATOR_SUPPLY("DBVDD3", "wm5110-codec"), + REGULATOR_SUPPLY("CPVDD", "wm5110-codec"), }; static struct regulator_init_data pvdd_1v8 __devinitdata = { @@ -685,6 +727,7 @@ static struct i2c_board_info i2c_devs1[] __devinitdata = { .irq = S3C_EINT(0), .platform_data = &glenfarclas_pmic_pdata }, + { I2C_BOARD_INFO("wlf-gf-module", 0x20) }, { I2C_BOARD_INFO("wlf-gf-module", 0x22) }, { I2C_BOARD_INFO("wlf-gf-module", 0x24) }, { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, @@ -810,7 +853,7 @@ static void __init crag6410_machine_init(void) i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); samsung_keypad_set_platdata(&crag6410_keypad_data); - s3c64xx_spi0_set_platdata(NULL, 0, 1); + s3c64xx_spi0_set_platdata(NULL, 0, 2); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 6a7ad3c2a3fc..9a23739f7026 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/ioport.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/serial_core.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> @@ -37,7 +38,6 @@ #include <asm/mach/flash.h> #include <asm/mach/irda.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/assabet.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 038df4894b0f..b2dadf3ea3df 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/tty.h> @@ -34,7 +35,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/hardware/sa1111.h> -#include <asm/mach/serial_sa1100.h> #include <mach/badge4.h> diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index ad0eb08ea077..304bca4a07c0 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/tty.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/irq.h> #include <linux/mtd/mtd.h> @@ -27,7 +28,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/cerf.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 170cb6107f68..45f424f5fca6 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/delay.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> @@ -40,7 +41,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index 63150e1ffe9e..f17e7382242a 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -17,12 +17,12 @@ #include <linux/mfd/htc-egpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/serial_core.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/h3xxx.h> diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index fc106aab7c7e..d005939c41fc 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/cpufreq.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/serial_core.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -35,7 +36,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/mach/serial_sa1100.h> #include <mach/hardware.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index e3084f47027d..35cfc428b4d4 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -17,6 +17,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/delay.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/ioport.h> #include <linux/mtd/mtd.h> @@ -30,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/hardware.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 3048b17e84c5..f69f78fc3ddd 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -4,6 +4,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/tty.h> #include <linux/gpio.h> #include <linux/leds.h> @@ -18,7 +19,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 41f69d97066f..102e08f7b109 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/root_dev.h> @@ -24,7 +25,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/hardware.h> #include <mach/nanoengine.h> diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 266db873a4e4..88be0474f3d7 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -7,6 +7,7 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/serial_core.h> @@ -14,7 +15,6 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <asm/hardware/sa1111.h> #include <asm/sizes.h> diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 37fe0a0a5369..c51bb63f90fb 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -6,6 +6,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/ioport.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/irq.h> #include <linux/io.h> @@ -18,7 +19,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <asm/mach/serial_sa1100.h> #include <mach/irqs.h> #include "generic.h" diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index ff6b7b35bca9..6460d25fbb88 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -5,6 +5,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/tty.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -18,7 +19,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/shannon.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 71790e581d93..6d65f65fcb23 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -9,6 +9,7 @@ #include <linux/proc_fs.h> #include <linux/string.h> #include <linux/pm.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> @@ -23,7 +24,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/simpad.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 8ae100cc655c..4eddca14ae07 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -2,18 +2,6 @@ if ARCH_SHMOBILE comment "SH-Mobile System Type" -config ARCH_SH7367 - bool "SH-Mobile G3 (SH7367)" - select ARCH_WANT_OPTIONAL_GPIOLIB - select CPU_V6 - select SH_CLK_CPG - -config ARCH_SH7377 - bool "SH-Mobile G4 (SH7377)" - select ARCH_WANT_OPTIONAL_GPIOLIB - select CPU_V7 - select SH_CLK_CPG - config ARCH_SH7372 bool "SH-Mobile AP4 (SH7372)" select ARCH_WANT_OPTIONAL_GPIOLIB @@ -50,17 +38,6 @@ config ARCH_EMEV2 comment "SH-Mobile Board Type" -config MACH_G3EVM - bool "G3EVM board" - depends on ARCH_SH7367 - select ARCH_REQUIRE_GPIOLIB - -config MACH_G4EVM - bool "G4EVM board" - depends on ARCH_SH7377 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - config MACH_AP4EVB bool "AP4EVB board" depends on ARCH_SH7372 @@ -95,6 +72,7 @@ config MACH_MACKEREL select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF config MACH_KOTA2 bool "KOTA2 board" @@ -146,8 +124,7 @@ menu "Memory configuration" config MEMORY_START hex "Physical memory start address" - default "0x50000000" if MACH_G3EVM - default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ + default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \ MACH_MACKEREL || MACH_BONITO || \ MACH_ARMADILLO800EVA default "0x41000000" if MACH_KOTA2 @@ -159,8 +136,6 @@ config MEMORY_START config MEMORY_SIZE hex "Physical memory size" - default "0x08000000" if MACH_G3EVM - default "0x08000000" if MACH_G4EVM default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \ MACH_ARMADILLO800EVA default "0x1e000000" if MACH_KOTA2 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fe2c97c179d1..0b7147928aa3 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -6,8 +6,6 @@ obj-y := timer.o console.o clock.o # CPU objects -obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o -obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o @@ -23,16 +21,12 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o # Pinmux setup pfc-y := -pfc-$(CONFIG_ARCH_SH7367) += pfc-sh7367.o -pfc-$(CONFIG_ARCH_SH7377) += pfc-sh7377.o pfc-$(CONFIG_ARCH_SH7372) += pfc-sh7372.o pfc-$(CONFIG_ARCH_SH73A0) += pfc-sh73a0.o pfc-$(CONFIG_ARCH_R8A7740) += pfc-r8a7740.o pfc-$(CONFIG_ARCH_R8A7779) += pfc-r8a7779.o # IRQ objects -obj-$(CONFIG_ARCH_SH7367) += entry-intc.o -obj-$(CONFIG_ARCH_SH7377) += entry-intc.o obj-$(CONFIG_ARCH_SH7372) += entry-intc.o obj-$(CONFIG_ARCH_R8A7740) += entry-intc.o @@ -45,8 +39,6 @@ obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o # Board objects -obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o -obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 790dc68c4312..cefdd030361d 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -728,7 +728,7 @@ fsia_ick_out: static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; - struct clk *fdiv_clk = &sh7372_fsidivb_clk; + struct clk *fdiv_clk = clk_get(NULL, "fsidivb"); long fsib_rate = 0; long fdiv_rate = 0; int ackmd_bpfmd; diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 3cc8b1c21da9..499e6e376666 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1229,6 +1229,13 @@ static void __init eva_add_early_devices(void) shmobile_timer.init = eva_earlytimer_init; } +#define RESCNT2 IOMEM(0xe6188020) +static void eva_restart(char mode, const char *cmd) +{ + /* Do soft power on reset */ + writel((1 << 31), RESCNT2); +} + static const char *eva_boards_compat_dt[] __initdata = { "renesas,armadillo800eva", NULL, @@ -1243,4 +1250,5 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = eva_boards_compat_dt, + .restart = eva_restart, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c deleted file mode 100644 index b179d4c213bb..000000000000 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * G3EVM board support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/sh_flctl.h> -#include <linux/usb/r8a66597.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/input/sh_keysc.h> -#include <linux/dma-mapping.h> -#include <mach/irqs.h> -#include <mach/sh7367.h> -#include <mach/common.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -/* - * IrDA - * - * S67: 5bit : ON power - * : 6bit : ON remote control - * OFF IrDA - */ - -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* USBHS */ -static void usb_host_port_power(int port, int power) -{ - if (!power) /* only power-on supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ - __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008)); -} - -static struct r8a66597_platdata usb_host_data = { - .on_chip = 1, - .port_power = usb_host_port_power, -}; - -static struct resource usb_host_resources[] = { - [0] = { - .name = "USBHS", - .start = 0xe6890000, - .end = 0xe68900e5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xa20), /* USBHS_USHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_host_device = { - .name = "r8a66597_hcd", - .id = 0, - .dev = { - .platform_data = &usb_host_data, - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(usb_host_resources), - .resource = usb_host_resources, -}; - -/* KEYSC */ -static struct sh_keysc_info keysc_info = { - .mode = SH_KEYSC_MODE_5, - .scan_timing = 3, - .delay = 100, - .keycodes = { - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, - KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N, - KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, - KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, - KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, - KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER, - }, -}; - -static struct resource keysc_resources[] = { - [0] = { - .name = "KEYSC", - .start = 0xe61b0000, - .end = 0xe61b000f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xbe0), /* KEYSC_KEY */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device keysc_device = { - .name = "sh_keysc", - .num_resources = ARRAY_SIZE(keysc_resources), - .resource = keysc_resources, - .dev = { - .platform_data = &keysc_info, - }, -}; - -static struct mtd_partition nand_partition_info[] = { - { - .name = "system", - .offset = 0, - .size = 64 * 1024 * 1024, - }, - { - .name = "userdata", - .offset = MTDPART_OFS_APPEND, - .size = 128 * 1024 * 1024, - }, - { - .name = "cache", - .offset = MTDPART_OFS_APPEND, - .size = 64 * 1024 * 1024, - }, -}; - -static struct resource nand_flash_resources[] = { - [0] = { - .start = 0xe6a30000, - .end = 0xe6a3009b, - .flags = IORESOURCE_MEM, - } -}; - -static struct sh_flctl_platform_data nand_flash_data = { - .parts = nand_partition_info, - .nr_parts = ARRAY_SIZE(nand_partition_info), - .flcmncr_val = QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E - | SHBUSSEL | SEL_16BIT, -}; - -static struct platform_device nand_flash_device = { - .name = "sh_flctl", - .resource = nand_flash_resources, - .num_resources = ARRAY_SIZE(nand_flash_resources), - .dev = { - .platform_data = &nand_flash_data, - }, -}; - -static struct resource irda_resources[] = { - [0] = { - .start = 0xE6D00000, - .end = 0xE6D01FD4 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x480), /* IRDA */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device irda_device = { - .name = "sh_irda", - .id = -1, - .resource = irda_resources, - .num_resources = ARRAY_SIZE(irda_resources), -}; - -static struct platform_device *g3evm_devices[] __initdata = { - &nor_flash_device, - &usb_host_device, - &keysc_device, - &nand_flash_device, - &irda_device, -}; - -static void __init g3evm_init(void) -{ - sh7367_pinmux_init(); - - /* Lit DS4 LED */ - gpio_request(GPIO_PORT22, NULL); - gpio_direction_output(GPIO_PORT22, 1); - gpio_export(GPIO_PORT22, 0); - - /* Lit DS8 LED */ - gpio_request(GPIO_PORT23, NULL); - gpio_direction_output(GPIO_PORT23, 1); - gpio_export(GPIO_PORT23, 0); - - /* Lit DS3 LED */ - gpio_request(GPIO_PORT24, NULL); - gpio_direction_output(GPIO_PORT24, 1); - gpio_export(GPIO_PORT24, 0); - - /* SCIFA1 */ - gpio_request(GPIO_FN_SCIFA1_TXD, NULL); - gpio_request(GPIO_FN_SCIFA1_RXD, NULL); - gpio_request(GPIO_FN_SCIFA1_CTS, NULL); - gpio_request(GPIO_FN_SCIFA1_RTS, NULL); - - /* USBHS */ - gpio_request(GPIO_FN_VBUS0, NULL); - gpio_request(GPIO_FN_PWEN, NULL); - gpio_request(GPIO_FN_OVCN, NULL); - gpio_request(GPIO_FN_OVCN2, NULL); - gpio_request(GPIO_FN_EXTLP, NULL); - gpio_request(GPIO_FN_IDIN, NULL); - - /* setup USB phy */ - __raw_writew(0x0300, IOMEM(0xe605810a)); /* USBCR1 */ - __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */ - __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */ - __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */ - - /* KEYSC @ CN7 */ - gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL); - gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL); - gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL); - gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL); - gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL); - gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL); - - /* FLCTL */ - gpio_request(GPIO_FN_FCE0, NULL); - gpio_request(GPIO_FN_D0_ED0_NAF0, NULL); - gpio_request(GPIO_FN_D1_ED1_NAF1, NULL); - gpio_request(GPIO_FN_D2_ED2_NAF2, NULL); - gpio_request(GPIO_FN_D3_ED3_NAF3, NULL); - gpio_request(GPIO_FN_D4_ED4_NAF4, NULL); - gpio_request(GPIO_FN_D5_ED5_NAF5, NULL); - gpio_request(GPIO_FN_D6_ED6_NAF6, NULL); - gpio_request(GPIO_FN_D7_ED7_NAF7, NULL); - gpio_request(GPIO_FN_D8_ED8_NAF8, NULL); - gpio_request(GPIO_FN_D9_ED9_NAF9, NULL); - gpio_request(GPIO_FN_D10_ED10_NAF10, NULL); - gpio_request(GPIO_FN_D11_ED11_NAF11, NULL); - gpio_request(GPIO_FN_D12_ED12_NAF12, NULL); - gpio_request(GPIO_FN_D13_ED13_NAF13, NULL); - gpio_request(GPIO_FN_D14_ED14_NAF14, NULL); - gpio_request(GPIO_FN_D15_ED15_NAF15, NULL); - gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL); - gpio_request(GPIO_FN_FRB, NULL); - /* FOE, FCDE, FSC on dedicated pins */ - __raw_writel(__raw_readl(IOMEM(0xe6158048)) & ~(1 << 15), IOMEM(0xe6158048)); - - /* IrDA */ - gpio_request(GPIO_FN_IRDA_OUT, NULL); - gpio_request(GPIO_FN_IRDA_IN, NULL); - gpio_request(GPIO_FN_IRDA_FIRSEL, NULL); - - sh7367_add_standard_devices(); - - platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices)); -} - -MACHINE_START(G3EVM, "g3evm") - .map_io = sh7367_map_io, - .init_early = sh7367_add_early_devices, - .init_irq = sh7367_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = g3evm_init, - .init_late = shmobile_init_late, - .timer = &shmobile_timer, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c deleted file mode 100644 index 35c126caa4d8..000000000000 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * G4EVM board support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/usb/r8a66597.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/input/sh_keysc.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/gpio.h> -#include <linux/dma-mapping.h> -#include <mach/irqs.h> -#include <mach/sh7377.h> -#include <mach/common.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "sh-gpio.h" - -/* - * SDHI - * - * SDHI0 : card detection is possible - * SDHI1 : card detection is impossible - * - * [G4-MAIN-BOARD] - * JP74 : short # DBG_2V8A for SDHI0 - * JP75 : NC # DBG_3V3A for SDHI0 - * JP76 : NC # DBG_3V3A_SD for SDHI0 - * JP77 : NC # 3V3A_SDIO for SDHI1 - * JP78 : short # DBG_2V8A for SDHI1 - * JP79 : NC # DBG_3V3A for SDHI1 - * JP80 : NC # DBG_3V3A_SD for SDHI1 - * - * [G4-CORE-BOARD] - * S32 : all off # to dissever from G3-CORE_DBG board - * S33 : all off # to dissever from G3-CORE_DBG board - * - * [G3-CORE_DBG-BOARD] - * S1 : all off # to dissever from G3-CORE_DBG board - * S3 : all off # to dissever from G3-CORE_DBG board - * S4 : all off # to dissever from G3-CORE_DBG board - */ - -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* USBHS */ -static void usb_host_port_power(int port, int power) -{ - if (!power) /* only power-on supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ - __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008)); -} - -static struct r8a66597_platdata usb_host_data = { - .on_chip = 1, - .port_power = usb_host_port_power, -}; - -static struct resource usb_host_resources[] = { - [0] = { - .name = "USBHS", - .start = 0xe6890000, - .end = 0xe68900e5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0a20), /* USBHS_USHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_host_device = { - .name = "r8a66597_hcd", - .id = 0, - .dev = { - .platform_data = &usb_host_data, - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(usb_host_resources), - .resource = usb_host_resources, -}; - -/* KEYSC */ -static struct sh_keysc_info keysc_info = { - .mode = SH_KEYSC_MODE_5, - .scan_timing = 3, - .delay = 100, - .keycodes = { - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, - KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, - KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R, - KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X, - KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, - KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, - KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER, - }, -}; - -static struct resource keysc_resources[] = { - [0] = { - .name = "KEYSC", - .start = 0xe61b0000, - .end = 0xe61b000f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0be0), /* KEYSC_KEY */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device keysc_device = { - .name = "sh_keysc", - .id = 0, /* keysc0 clock */ - .num_resources = ARRAY_SIZE(keysc_resources), - .resource = keysc_resources, - .dev = { - .platform_data = &keysc_info, - }, -}; - -/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), -}; - -/* SDHI */ -static struct sh_mobile_sdhi_info sdhi0_info = { - .tmio_caps = MMC_CAP_SDIO_IRQ, -}; - -static struct resource sdhi0_resources[] = { - [0] = { - .name = "SDHI0", - .start = 0xe6d50000, - .end = 0xe6d500ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e00), /* SDHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, - .dev = { - .platform_data = &sdhi0_info, - }, -}; - -static struct sh_mobile_sdhi_info sdhi1_info = { - .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, -}; - -static struct resource sdhi1_resources[] = { - [0] = { - .name = "SDHI1", - .start = 0xe6d60000, - .end = 0xe6d600ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e80), /* SDHI1 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi1_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi1_resources), - .resource = sdhi1_resources, - .id = 1, - .dev = { - .platform_data = &sdhi1_info, - }, -}; - -static struct platform_device *g4evm_devices[] __initdata = { - &nor_flash_device, - &usb_host_device, - &keysc_device, - &sdhi0_device, - &sdhi1_device, -}; - -#define GPIO_SDHID0_D0 IOMEM(0xe60520fc) -#define GPIO_SDHID0_D1 IOMEM(0xe60520fd) -#define GPIO_SDHID0_D2 IOMEM(0xe60520fe) -#define GPIO_SDHID0_D3 IOMEM(0xe60520ff) -#define GPIO_SDHICMD0 IOMEM(0xe6052100) - -#define GPIO_SDHID1_D0 IOMEM(0xe6052103) -#define GPIO_SDHID1_D1 IOMEM(0xe6052104) -#define GPIO_SDHID1_D2 IOMEM(0xe6052105) -#define GPIO_SDHID1_D3 IOMEM(0xe6052106) -#define GPIO_SDHICMD1 IOMEM(0xe6052107) - -static void __init g4evm_init(void) -{ - regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - - sh7377_pinmux_init(); - - /* Lit DS14 LED */ - gpio_request(GPIO_PORT109, NULL); - gpio_direction_output(GPIO_PORT109, 1); - gpio_export(GPIO_PORT109, 1); - - /* Lit DS15 LED */ - gpio_request(GPIO_PORT110, NULL); - gpio_direction_output(GPIO_PORT110, 1); - gpio_export(GPIO_PORT110, 1); - - /* Lit DS16 LED */ - gpio_request(GPIO_PORT112, NULL); - gpio_direction_output(GPIO_PORT112, 1); - gpio_export(GPIO_PORT112, 1); - - /* Lit DS17 LED */ - gpio_request(GPIO_PORT113, NULL); - gpio_direction_output(GPIO_PORT113, 1); - gpio_export(GPIO_PORT113, 1); - - /* USBHS */ - gpio_request(GPIO_FN_VBUS_0, NULL); - gpio_request(GPIO_FN_PWEN, NULL); - gpio_request(GPIO_FN_OVCN, NULL); - gpio_request(GPIO_FN_OVCN2, NULL); - gpio_request(GPIO_FN_EXTLP, NULL); - gpio_request(GPIO_FN_IDIN, NULL); - - /* setup USB phy */ - __raw_writew(0x0200, IOMEM(0xe605810a)); /* USBCR1 */ - __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */ - __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */ - __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */ - - /* KEYSC @ CN31 */ - gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL); - gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL); - gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL); - gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL); - gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL); - gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL); - - /* SDHI0 */ - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHICD0, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request_pullup(GPIO_SDHID0_D0); - gpio_request_pullup(GPIO_SDHID0_D1); - gpio_request_pullup(GPIO_SDHID0_D2); - gpio_request_pullup(GPIO_SDHID0_D3); - gpio_request_pullup(GPIO_SDHICMD0); - - /* SDHI1 */ - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHID1_0, NULL); - gpio_request(GPIO_FN_SDHID1_1, NULL); - gpio_request(GPIO_FN_SDHID1_2, NULL); - gpio_request(GPIO_FN_SDHID1_3, NULL); - gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_request_pullup(GPIO_SDHID1_D0); - gpio_request_pullup(GPIO_SDHID1_D1); - gpio_request_pullup(GPIO_SDHID1_D2); - gpio_request_pullup(GPIO_SDHID1_D3); - gpio_request_pullup(GPIO_SDHICMD1); - - sh7377_add_standard_devices(); - - platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); -} - -MACHINE_START(G4EVM, "g4evm") - .map_io = sh7377_map_io, - .init_early = sh7377_add_early_devices, - .init_irq = sh7377_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = g4evm_init, - .init_late = shmobile_init_late, - .timer = &shmobile_timer, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 0a43f3189c21..c02448d6847f 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -384,6 +384,8 @@ static struct regulator_consumer_supply fixed2v8_power_consumers[] = /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, @@ -424,6 +426,8 @@ static struct platform_device sdhi0_device = { /* Micro SD */ static struct sh_mobile_sdhi_info sdhi2_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD | TMIO_MMC_WRPROTECT_DISABLE, @@ -548,7 +552,6 @@ static struct platform_device fsi_ak4648_device = { /* I2C */ static struct pcf857x_platform_data pcf8575_pdata = { .gpio_base = GPIO_PCF8575_BASE, - .irq = intcs_evt2irq(0x3260), /* IRQ19 */ }; static struct i2c_board_info i2c0_devices[] = { @@ -557,7 +560,15 @@ static struct i2c_board_info i2c0_devices[] = { }, { I2C_BOARD_INFO("r2025sd", 0x32), - } + }, + { + I2C_BOARD_INFO("ak8975", 0x0c), + .irq = intcs_evt2irq(0x3380), /* IRQ28 */ + }, + { + I2C_BOARD_INFO("adxl34x", 0x1d), + .irq = intcs_evt2irq(0x3340), /* IRQ26 */ + }, }; static struct i2c_board_info i2c1_devices[] = { @@ -570,6 +581,7 @@ static struct i2c_board_info i2c1_devices[] = { static struct i2c_board_info i2c3_devices[] = { { I2C_BOARD_INFO("pcf8575", 0x20), + .irq = intcs_evt2irq(0x3260), /* IRQ19 */ .platform_data = &pcf8575_pdata, }, }; diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 0c27c810cf99..f274252e4705 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -882,7 +882,7 @@ static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) static int fsi_b_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; - struct clk *fdiv_clk = &sh7372_fsidivb_clk; + struct clk *fdiv_clk = clk_get(NULL, "fsidivb"); long fsib_rate = 0; long fdiv_rate = 0; int ackmd_bpfmd; @@ -1651,7 +1651,12 @@ static void __init mackerel_init(void) pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } -MACHINE_START(MACKEREL, "mackerel") +static const char *mackerel_boards_compat_dt[] __initdata = { + "renesas,mackerel", + NULL, +}; + +DT_MACHINE_START(MACKEREL_DT, "mackerel") .map_io = sh7372_map_io, .init_early = sh7372_add_early_devices, .init_irq = sh7372_init_irq, @@ -1659,4 +1664,5 @@ MACHINE_START(MACKEREL, "mackerel") .init_machine = mackerel_init, .init_late = sh7372_pm_init_late, .timer = &shmobile_timer, + .dt_compat = mackerel_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index b8a7525a4e2f..69f7f464eff8 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -30,6 +30,8 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> +#include <linux/spi/spi.h> +#include <linux/spi/sh_hspi.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <mach/hardware.h> @@ -126,10 +128,27 @@ static struct platform_device thermal_device = { .num_resources = ARRAY_SIZE(thermal_resources), }; +/* HSPI */ +static struct resource hspi_resources[] = { + [0] = { + .start = 0xFFFC7000, + .end = 0xFFFC7018 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device hspi_device = { + .name = "sh-hspi", + .id = 0, + .resource = hspi_resources, + .num_resources = ARRAY_SIZE(hspi_resources), +}; + static struct platform_device *marzen_devices[] __initdata = { ð_device, &sdhi0_device, &thermal_device, + &hspi_device, }; static void __init marzen_init(void) @@ -163,6 +182,12 @@ static void __init marzen_init(void) gpio_request(GPIO_FN_SD0_CD, NULL); gpio_request(GPIO_FN_SD0_WP, NULL); + /* HSPI 0 */ + gpio_request(GPIO_FN_HSPI_CLK0, NULL); + gpio_request(GPIO_FN_HSPI_CS0, NULL); + gpio_request(GPIO_FN_HSPI_TX0, NULL); + gpio_request(GPIO_FN_HSPI_RX0, NULL); + r8a7779_add_standard_devices(); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); } diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 6729e0032180..eac49d59782f 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -65,6 +65,9 @@ #define SMSTPCR3 IOMEM(0xe615013c) #define SMSTPCR4 IOMEM(0xe6150140) +#define FSIDIVA IOMEM(0xFE1F8000) +#define FSIDIVB IOMEM(0xFE1F8008) + /* Fixed 32 KHz root clock from EXTALR pin */ static struct clk extalr_clk = { .rate = 32768, @@ -188,6 +191,22 @@ static struct clk pllc1_div2_clk = { }; /* USB clock */ +/* + * USBCKCR is controlling usb24 clock + * bit[7] : parent clock + * bit[6] : clock divide rate + * And this bit[7] is used as a "usb24s" from other devices. + * (Video clock / Sub clock / SPU clock) + * You can controll this clock as a below. + * + * struct clk *usb24 = clk_get(dev, "usb24"); + * struct clk *usb24s = clk_get(NULL, "usb24s"); + * struct clk *system = clk_get(NULL, "system_clk"); + * int rate = clk_get_rate(system); + * + * clk_set_parent(usb24s, system); // for bit[7] + * clk_set_rate(usb24, rate / 2); // for bit[6] + */ static struct clk *usb24s_parents[] = { [0] = &system_clk, [1] = &extal2_clk @@ -427,6 +446,14 @@ static struct clk *late_main_clks[] = { &hdmi2_clk, }; +/* FSI DIV */ +enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR }; + +static struct clk fsidivs[] = { + [FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]), + [FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]), +}; + /* MSTP */ enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP, @@ -596,6 +623,10 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), + CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), + CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), + CLKDEV_ICK_ID("xcka", "sh_fsi2", &fsiack_clk), + CLKDEV_ICK_ID("xckb", "sh_fsi2", &fsibck_clk), }; void __init r8a7740_clock_init(u8 md_ck) @@ -641,6 +672,9 @@ void __init r8a7740_clock_init(u8 md_ck) for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) ret = clk_register(late_main_clks[k]); + if (!ret) + ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 37b2a3133b3b..c019609da660 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -87,8 +87,11 @@ static struct clk div4_clks[DIV4_NR] = { }; enum { MSTP323, MSTP322, MSTP321, MSTP320, - MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, + MSTP101, MSTP100, + MSTP030, + MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP014, + MSTP007, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { @@ -96,6 +99,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */ [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */ + [MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 1, 0), /* USB2 */ + [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0), /* USB0/1 */ + [MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */ + [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */ + [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */ + [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0), /* I2C3 */ [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */ [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */ [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */ @@ -105,6 +114,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */ [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */ [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */ + [MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR0, 7, 0), /* HSPI */ }; static unsigned long mul4_recalc(struct clk *clk) @@ -146,14 +156,25 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]), /* MSTP32 clocks */ + CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */ + CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */ + CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ + CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */ + CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ + CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ + CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ + CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ + CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ + CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ + CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c deleted file mode 100644 index ef0a95e592c4..000000000000 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ /dev/null @@ -1,355 +0,0 @@ -/* - * SH7367 clock framework support - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include <mach/common.h> - -/* SH7367 registers */ -#define RTFRQCR IOMEM(0xe6150000) -#define SYFRQCR IOMEM(0xe6150004) -#define CMFRQCR IOMEM(0xe61500E0) -#define VCLKCR1 IOMEM(0xe6150008) -#define VCLKCR2 IOMEM(0xe615000C) -#define VCLKCR3 IOMEM(0xe615001C) -#define SCLKACR IOMEM(0xe6150010) -#define SCLKBCR IOMEM(0xe6150014) -#define SUBUSBCKCR IOMEM(0xe6158080) -#define SPUCKCR IOMEM(0xe6150084) -#define MSUCKCR IOMEM(0xe6150088) -#define MVI3CKCR IOMEM(0xe6150090) -#define VOUCKCR IOMEM(0xe6150094) -#define MFCK1CR IOMEM(0xe6150098) -#define MFCK2CR IOMEM(0xe615009C) -#define PLLC1CR IOMEM(0xe6150028) -#define PLLC2CR IOMEM(0xe615002C) -#define RTMSTPCR0 IOMEM(0xe6158030) -#define RTMSTPCR2 IOMEM(0xe6158038) -#define SYMSTPCR0 IOMEM(0xe6158040) -#define SYMSTPCR2 IOMEM(0xe6158048) -#define CMMSTPCR0 IOMEM(0xe615804c) - -/* Fixed 32 KHz root clock from EXTALR pin */ -static struct clk r_clk = { - .rate = 32768, -}; - -/* - * 26MHz default rate for the EXTALB1 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7367_extalb1_clk = { - .rate = 26666666, -}; - -/* - * 48MHz default rate for the EXTAL2 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7367_extal2_clk = { - .rate = 48000000, -}; - -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc(struct clk *clk) -{ - return clk->parent->rate / 2; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; - -/* Divide extalb1 by two */ -static struct clk extalb1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7367_extalb1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7367_extal2_clk, -}; - -/* PLLC1 */ -static unsigned long pllc1_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC1CR) & (1 << 14)) - mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc1_clk_ops = { - .recalc = pllc1_recalc, -}; - -static struct clk pllc1_clk = { - .ops = &pllc1_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalb1_div2_clk, -}; - -/* Divide PLLC1 by two */ -static struct clk pllc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pllc1_clk, -}; - -/* PLLC2 */ -static unsigned long pllc2_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC2CR) & (1 << 31)) - mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc2_clk_ops = { - .recalc = pllc2_recalc, -}; - -static struct clk pllc2_clk = { - .ops = &pllc2_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalb1_div2_clk, -}; - -static struct clk *main_clks[] = { - &r_clk, - &sh7367_extalb1_clk, - &sh7367_extal2_clk, - &extalb1_div2_clk, - &extal2_div2_clk, - &pllc1_clk, - &pllc1_div2_clk, - &pllc2_clk, -}; - -static void div4_kick(struct clk *clk) -{ - unsigned long value; - - /* set KICK bit in SYFRQCR to update hardware setting */ - value = __raw_readl(SYFRQCR); - value |= (1 << 31); - __raw_writel(value, SYFRQCR); -} - -static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, - 24, 32, 36, 48, 0, 72, 0, 0 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, - .kick = div4_kick, -}; - -enum { DIV4_I, DIV4_G, DIV4_S, DIV4_B, - DIV4_ZX, DIV4_ZT, DIV4_Z, DIV4_ZD, DIV4_HP, - DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR }; - -#define DIV4(_reg, _bit, _mask, _flags) \ - SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_G] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_S] = DIV4(RTFRQCR, 12, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_ZX] = DIV4(SYFRQCR, 20, 0x6fff, 0), - [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0), - [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0), - [DIV4_ZD] = DIV4(SYFRQCR, 8, 0x6fff, 0), - [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0), - [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0), - [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0), - [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0), - [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0), -}; - -enum { DIV6_SUB, DIV6_SIUA, DIV6_SIUB, DIV6_MSU, DIV6_SPU, - DIV6_MVI3, DIV6_MF1, DIV6_MF2, - DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VOU, - DIV6_NR }; - -static struct clk div6_clks[DIV6_NR] = { - [DIV6_SUB] = SH_CLK_DIV6(&sh7367_extal2_clk, SUBUSBCKCR, 0), - [DIV6_SIUA] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKACR, 0), - [DIV6_SIUB] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKBCR, 0), - [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0), - [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), - [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0), - [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0), - [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0), - [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), - [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), - [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), - [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0), -}; - -enum { RTMSTP001, - RTMSTP231, RTMSTP230, RTMSTP229, RTMSTP228, RTMSTP226, - RTMSTP216, RTMSTP206, RTMSTP205, RTMSTP201, - SYMSTP023, SYMSTP007, SYMSTP006, SYMSTP004, - SYMSTP003, SYMSTP002, SYMSTP001, SYMSTP000, - SYMSTP231, SYMSTP229, SYMSTP225, SYMSTP223, SYMSTP222, - SYMSTP215, SYMSTP214, SYMSTP213, SYMSTP211, - CMMSTP003, - MSTP_NR }; - -#define MSTP(_parent, _reg, _bit, _flags) \ - SH_CLK_MSTP32(_parent, _reg, _bit, _flags) - -static struct clk mstp_clks[MSTP_NR] = { - [RTMSTP001] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR0, 1, 0), /* IIC2 */ - [RTMSTP231] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 31, 0), /* VEU3 */ - [RTMSTP230] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 30, 0), /* VEU2 */ - [RTMSTP229] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 29, 0), /* VEU1 */ - [RTMSTP228] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 28, 0), /* VEU0 */ - [RTMSTP226] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 26, 0), /* VEU2H */ - [RTMSTP216] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR2, 16, 0), /* IIC0 */ - [RTMSTP206] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 6, 0), /* JPU */ - [RTMSTP205] = MSTP(&div6_clks[DIV6_VOU], RTMSTPCR2, 5, 0), /* VOU */ - [RTMSTP201] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 1, 0), /* VPU */ - [SYMSTP023] = MSTP(&div6_clks[DIV6_SPU], SYMSTPCR0, 23, 0), /* SPU1 */ - [SYMSTP007] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 7, 0), /* SCIFA5 */ - [SYMSTP006] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 6, 0), /* SCIFB */ - [SYMSTP004] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 4, 0), /* SCIFA0 */ - [SYMSTP003] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 3, 0), /* SCIFA1 */ - [SYMSTP002] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 2, 0), /* SCIFA2 */ - [SYMSTP001] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 1, 0), /* SCIFA3 */ - [SYMSTP000] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 0, 0), /* SCIFA4 */ - [SYMSTP231] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 31, 0), /* SIU */ - [SYMSTP229] = MSTP(&r_clk, SYMSTPCR2, 29, 0), /* CMT10 */ - [SYMSTP225] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 25, 0), /* IRDA */ - [SYMSTP223] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 23, 0), /* IIC1 */ - [SYMSTP222] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 22, 0), /* USBHS */ - [SYMSTP215] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 15, 0), /* FLCTL */ - [SYMSTP214] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 14, 0), /* SDHI0 */ - [SYMSTP213] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 13, 0), /* SDHI1 */ - [SYMSTP211] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 11, 0), /* SDHI2 */ - [CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */ -}; - -static struct clk_lookup lookups[] = { - /* main clocks */ - CLKDEV_CON_ID("r_clk", &r_clk), - CLKDEV_CON_ID("extalb1", &sh7367_extalb1_clk), - CLKDEV_CON_ID("extal2", &sh7367_extal2_clk), - CLKDEV_CON_ID("extalb1_div2_clk", &extalb1_div2_clk), - CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), - CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), - CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), - CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), - - /* DIV4 clocks */ - CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), - CLKDEV_CON_ID("g_clk", &div4_clks[DIV4_G]), - CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), - CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]), - CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), - CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]), - CLKDEV_CON_ID("zd_clk", &div4_clks[DIV4_ZD]), - CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), - CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]), - CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), - CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), - CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), - - /* DIV6 clocks */ - CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), - CLKDEV_CON_ID("siua_clk", &div6_clks[DIV6_SIUA]), - CLKDEV_CON_ID("siub_clk", &div6_clks[DIV6_SIUB]), - CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]), - CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), - CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]), - CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]), - CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]), - CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), - CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), - CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), - CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[RTMSTP001]), /* IIC2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[RTMSTP231]), /* VEU3 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[RTMSTP230]), /* VEU2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[RTMSTP229]), /* VEU1 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[RTMSTP228]), /* VEU0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[RTMSTP226]), /* VEU2H */ - CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[RTMSTP216]), /* IIC0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[RTMSTP206]), /* JPU */ - CLKDEV_DEV_ID("sh-vou", &mstp_clks[RTMSTP205]), /* VOU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[RTMSTP201]), /* VPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[SYMSTP023]), /* SPU1 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[SYMSTP007]), /* SCIFA5 */ - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[SYMSTP006]), /* SCIFB */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[SYMSTP004]), /* SCIFA0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[SYMSTP003]), /* SCIFA1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[SYMSTP002]), /* SCIFA2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[SYMSTP229]), /* CMT10 */ - CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */ - CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[SYMSTP222]), /* USBHS */ - CLKDEV_DEV_ID("sh_flctl", &mstp_clks[SYMSTP215]), /* FLCTL */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[SYMSTP214]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[SYMSTP213]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[SYMSTP211]), /* SDHI2 */ - CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[CMMSTP003]), /* KEYSC */ -}; - -void __init sh7367_clock_init(void) -{ - int k, ret = 0; - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_div6_register(div6_clks, DIV6_NR); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup sh7367 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 430a90ffa120..4d57e342537b 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -420,87 +420,11 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { }; /* FSI DIV */ -static unsigned long fsidiv_recalc(struct clk *clk) -{ - unsigned long value; - - value = __raw_readl(clk->mapping->base); - - value >>= 16; - if (value < 2) - return 0; - - return clk->parent->rate / value; -} - -static long fsidiv_round_rate(struct clk *clk, unsigned long rate) -{ - return clk_rate_div_range_round(clk, 2, 0xffff, rate); -} - -static void fsidiv_disable(struct clk *clk) -{ - __raw_writel(0, clk->mapping->base); -} - -static int fsidiv_enable(struct clk *clk) -{ - unsigned long value; - - value = __raw_readl(clk->mapping->base) >> 16; - if (value < 2) - return -EIO; - - __raw_writel((value << 16) | 0x3, clk->mapping->base); - - return 0; -} +enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR }; -static int fsidiv_set_rate(struct clk *clk, unsigned long rate) -{ - int idx; - - idx = (clk->parent->rate / rate) & 0xffff; - if (idx < 2) - return -EINVAL; - - __raw_writel(idx << 16, clk->mapping->base); - return 0; -} - -static struct sh_clk_ops fsidiv_clk_ops = { - .recalc = fsidiv_recalc, - .round_rate = fsidiv_round_rate, - .set_rate = fsidiv_set_rate, - .enable = fsidiv_enable, - .disable = fsidiv_disable, -}; - -static struct clk_mapping fsidiva_clk_mapping = { - .phys = FSIDIVA, - .len = 8, -}; - -struct clk sh7372_fsidiva_clk = { - .ops = &fsidiv_clk_ops, - .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */ - .mapping = &fsidiva_clk_mapping, -}; - -static struct clk_mapping fsidivb_clk_mapping = { - .phys = FSIDIVB, - .len = 8, -}; - -struct clk sh7372_fsidivb_clk = { - .ops = &fsidiv_clk_ops, - .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */ - .mapping = &fsidivb_clk_mapping, -}; - -static struct clk *late_main_clks[] = { - &sh7372_fsidiva_clk, - &sh7372_fsidivb_clk, +static struct clk fsidivs[] = { + [FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]), + [FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]), }; enum { MSTP001, MSTP000, @@ -583,6 +507,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk), + CLKDEV_CON_ID("fsidiva", &fsidivs[FSIDIV_A]), + CLKDEV_CON_ID("fsidivb", &fsidivs[FSIDIV_B]), /* DIV4 clocks */ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), @@ -678,6 +604,10 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]), + CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), + CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), + CLKDEV_ICK_ID("xcka", "sh_fsi2", &sh7372_fsiack_clk), + CLKDEV_ICK_ID("xckb", "sh_fsi2", &sh7372_fsibck_clk), }; void __init sh7372_clock_init(void) @@ -706,8 +636,8 @@ void __init sh7372_clock_init(void) if (!ret) ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) - ret = clk_register(late_main_clks[k]); + if (!ret) + ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c deleted file mode 100644 index b8480d19e1c8..000000000000 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * SH7377 clock framework support - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include <mach/common.h> - -/* SH7377 registers */ -#define RTFRQCR IOMEM(0xe6150000) -#define SYFRQCR IOMEM(0xe6150004) -#define CMFRQCR IOMEM(0xe61500E0) -#define VCLKCR1 IOMEM(0xe6150008) -#define VCLKCR2 IOMEM(0xe615000C) -#define VCLKCR3 IOMEM(0xe615001C) -#define FMSICKCR IOMEM(0xe6150010) -#define FMSOCKCR IOMEM(0xe6150014) -#define FSICKCR IOMEM(0xe6150018) -#define PLLC1CR IOMEM(0xe6150028) -#define PLLC2CR IOMEM(0xe615002C) -#define SUBUSBCKCR IOMEM(0xe6150080) -#define SPUCKCR IOMEM(0xe6150084) -#define MSUCKCR IOMEM(0xe6150088) -#define MVI3CKCR IOMEM(0xe6150090) -#define HDMICKCR IOMEM(0xe6150094) -#define MFCK1CR IOMEM(0xe6150098) -#define MFCK2CR IOMEM(0xe615009C) -#define DSITCKCR IOMEM(0xe6150060) -#define DSIPCKCR IOMEM(0xe6150064) -#define SMSTPCR0 IOMEM(0xe6150130) -#define SMSTPCR1 IOMEM(0xe6150134) -#define SMSTPCR2 IOMEM(0xe6150138) -#define SMSTPCR3 IOMEM(0xe615013C) -#define SMSTPCR4 IOMEM(0xe6150140) - -/* Fixed 32 KHz root clock from EXTALR pin */ -static struct clk r_clk = { - .rate = 32768, -}; - -/* - * 26MHz default rate for the EXTALC1 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7377_extalc1_clk = { - .rate = 26666666, -}; - -/* - * 48MHz default rate for the EXTAL2 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7377_extal2_clk = { - .rate = 48000000, -}; - -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc(struct clk *clk) -{ - return clk->parent->rate / 2; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; - -/* Divide extalc1 by two */ -static struct clk extalc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7377_extalc1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7377_extal2_clk, -}; - -/* Divide extal2 by four */ -static struct clk extal2_div4_clk = { - .ops = &div2_clk_ops, - .parent = &extal2_div2_clk, -}; - -/* PLLC1 */ -static unsigned long pllc1_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC1CR) & (1 << 14)) - mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc1_clk_ops = { - .recalc = pllc1_recalc, -}; - -static struct clk pllc1_clk = { - .ops = &pllc1_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalc1_div2_clk, -}; - -/* Divide PLLC1 by two */ -static struct clk pllc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pllc1_clk, -}; - -/* PLLC2 */ -static unsigned long pllc2_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC2CR) & (1 << 31)) - mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc2_clk_ops = { - .recalc = pllc2_recalc, -}; - -static struct clk pllc2_clk = { - .ops = &pllc2_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalc1_div2_clk, -}; - -static struct clk *main_clks[] = { - &r_clk, - &sh7377_extalc1_clk, - &sh7377_extal2_clk, - &extalc1_div2_clk, - &extal2_div2_clk, - &extal2_div4_clk, - &pllc1_clk, - &pllc1_div2_clk, - &pllc2_clk, -}; - -static void div4_kick(struct clk *clk) -{ - unsigned long value; - - /* set KICK bit in SYFRQCR to update hardware setting */ - value = __raw_readl(SYFRQCR); - value |= (1 << 31); - __raw_writel(value, SYFRQCR); -} - -static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, - 24, 32, 36, 48, 0, 72, 96, 0 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, - .kick = div4_kick, -}; - -enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR, - DIV4_ZTR, DIV4_ZT, DIV4_Z, DIV4_HP, - DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR }; - -#define DIV4(_reg, _bit, _mask, _flags) \ - SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_ZG] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_M1] = DIV4(RTFRQCR, 4, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_CSIR] = DIV4(RTFRQCR, 0, 0x6fff, 0), - [DIV4_ZTR] = DIV4(SYFRQCR, 20, 0x6fff, 0), - [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0), - [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0), - [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0), - [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0), - [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0), - [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0), - [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0), -}; - -enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO, - DIV6_FSI, DIV6_SUB, DIV6_SPU, DIV6_MSU, DIV6_MVI3, DIV6_HDMI, - DIV6_MF1, DIV6_MF2, DIV6_DSIT, DIV6_DSIP, - DIV6_NR }; - -static struct clk div6_clks[] = { - [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), - [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), - [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), - [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0), - [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0), - [DIV6_FSI] = SH_CLK_DIV6(&pllc1_div2_clk, FSICKCR, 0), - [DIV6_SUB] = SH_CLK_DIV6(&sh7377_extal2_clk, SUBUSBCKCR, 0), - [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), - [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0), - [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0), - [DIV6_HDMI] = SH_CLK_DIV6(&pllc1_div2_clk, HDMICKCR, 0), - [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0), - [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0), - [DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0), - [DIV6_DSIP] = SH_CLK_DIV6(&pllc1_div2_clk, DSIPCKCR, 0), -}; - -enum { MSTP001, - MSTP131, MSTP130, MSTP129, MSTP128, MSTP116, MSTP106, MSTP101, - MSTP223, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, MSTP322, - MSTP315, MSTP314, MSTP313, - MSTP403, - MSTP_NR }; - -#define MSTP(_parent, _reg, _bit, _flags) \ - SH_CLK_MSTP32(_parent, _reg, _bit, _flags) - -static struct clk mstp_clks[] = { - [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ - [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ - [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ - [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ - [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */ - [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ - [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */ - [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */ - [MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */ - [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ - [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ - [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ - [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ - [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ - [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ - [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ - [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IRDA */ - [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ - [MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL */ - [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ - [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ - [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ -}; - -static struct clk_lookup lookups[] = { - /* main clocks */ - CLKDEV_CON_ID("r_clk", &r_clk), - CLKDEV_CON_ID("extalc1", &sh7377_extalc1_clk), - CLKDEV_CON_ID("extal2", &sh7377_extal2_clk), - CLKDEV_CON_ID("extalc1_div2_clk", &extalc1_div2_clk), - CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), - CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk), - CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), - CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), - CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), - - /* DIV4 clocks */ - CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), - CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]), - CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), - CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]), - CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]), - CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]), - CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), - CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]), - CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), - CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]), - CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), - CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), - CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), - - /* DIV6 clocks */ - CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), - CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), - CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), - CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), - CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), - CLKDEV_CON_ID("fsi_clk", &div6_clks[DIV6_FSI]), - CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), - CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), - CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]), - CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]), - CLKDEV_CON_ID("hdmi_clk", &div6_clks[DIV6_HDMI]), - CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]), - CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]), - CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]), - CLKDEV_CON_ID("dsip_clk", &div6_clks[DIV6_DSIP]), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ - CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ - CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP206]), /* SCIFB */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ - CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */ - CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USBHS */ - CLKDEV_DEV_ID("sh_flctl", &mstp_clks[MSTP315]), /* FLCTL */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ -}; - -void __init sh7377_clock_init(void) -{ - int k, ret = 0; - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_div6_register(div6_clks, DIV6_NR); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup sh7377 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index d47e215aca87..dfeca79e9e96 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -18,24 +18,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); -extern void sh7367_init_irq(void); -extern void sh7367_map_io(void); -extern void sh7367_add_early_devices(void); -extern void sh7367_add_standard_devices(void); -extern void sh7367_clock_init(void); -extern void sh7367_pinmux_init(void); -extern struct clk sh7367_extalb1_clk; -extern struct clk sh7367_extal2_clk; - -extern void sh7377_init_irq(void); -extern void sh7377_map_io(void); -extern void sh7377_add_early_devices(void); -extern void sh7377_add_standard_devices(void); -extern void sh7377_clock_init(void); -extern void sh7377_pinmux_init(void); -extern struct clk sh7377_extalc1_clk; -extern struct clk sh7377_extal2_clk; - extern void sh7372_init_irq(void); extern void sh7372_map_io(void); extern void sh7372_add_early_devices(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index 499f52d2a4a1..8ab0cd6ad6b0 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -71,7 +71,7 @@ enum { GPIO_FN_A19, /* IPSR0 */ - GPIO_FN_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0, + GPIO_FN_USB_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0, GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2, GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF, GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3, diff --git a/arch/arm/mach-shmobile/include/mach/sh7367.h b/arch/arm/mach-shmobile/include/mach/sh7367.h deleted file mode 100644 index 52d0de686f68..000000000000 --- a/arch/arm/mach-shmobile/include/mach/sh7367.h +++ /dev/null @@ -1,332 +0,0 @@ -#ifndef __ASM_SH7367_H__ -#define __ASM_SH7367_H__ - -/* Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* 49-1 -> 49-6 (GPIO) */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119, - - GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124, - GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169, - - GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174, - GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179, - - GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184, - GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189, - - GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, - GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, - - GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, - GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, - - GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, - GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, - - GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, - GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, - - GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, - GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, - - GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, - GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, - - GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, - GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, - - GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, - GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269, - - GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU, - GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU, - GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU, - GPIO_FN_PORT58_KEYIN6_PU, - - /* 49-1 (FN) */ - GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2, - GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6, - GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10, - GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2, - GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5, - GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2, - GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20, - GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22, - GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7, - GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2, - GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK, - GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, - GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, - GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK, - GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS, - - /* 49-2 (FN) */ - GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0, - GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1, - GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK, - GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0, - GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1, - GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2, - GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3, - GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4, - GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5, - GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0, - GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1, - GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2, - GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC, - GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK, - GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD, - GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD, - GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3, - GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4, - GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5, - GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6, - GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1, - GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2, - GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A, - GPIO_FN_XTALB1L, - GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS, - GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK, - GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD, - GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD, - GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS, - GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS, - GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0, - GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1, - GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2, - GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3, - GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0, - GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1, - GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2, - GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3, - GPIO_FN_NMI, GPIO_FN_TPU4TO0, - GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3, - GPIO_FN_IRQ_TMPB, - GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1, - GPIO_FN_OVCN, GPIO_FN_MFG1_IN1, - GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2, - - /* 49-3 (FN) */ - GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2, - GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN, - GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1, - GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2, - GPIO_FN_SCIFA5_RXD, - GPIO_FN_SCIFA5_TXD, - GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1, - GPIO_FN_A0_EA0, GPIO_FN_BS, - GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0, - GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL, - GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2, - GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1, - GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3, - GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC, - GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4, - GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5, - GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD, - GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0, - GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1, - GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC, - GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2, - GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3, - GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4, - GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD, - GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5, - GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2, - GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL, - GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2, - GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5, - GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8, - GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11, - GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13, - GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15, - GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1, - GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A, - GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD, - GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE, - GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO, - GPIO_FN_NBRSTOUT, GPIO_FN_NBRST, - - /* 49-4 (FN) */ - GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD, - GPIO_FN_VIO_VD, GPIO_FN_VIO_HD, - GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2, - GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5, - GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8, - GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11, - GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14, - GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD, - GPIO_FN_VIO_CKO, - GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2, - GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0, - GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1, - GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2, - GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3, - GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0, - GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2, - GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1, - GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2, - GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1, - GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3, - GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1, - GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4, - GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2, - GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5, - GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2, - GPIO_FN_LCDD6, GPIO_FN_DV_D6, - GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2, - GPIO_FN_LCDD7, GPIO_FN_DV_D7, - GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3, - GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16, - GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17, - GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18, - GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19, - GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20, - GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21, - GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22, - GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23, - GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24, - GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25, - GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK, - GPIO_FN_D26, GPIO_FN_ED26, - GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC, - GPIO_FN_D27, GPIO_FN_ED27, - GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, - GPIO_FN_D28, GPIO_FN_ED28, - GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, - GPIO_FN_D29, GPIO_FN_ED29, - GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1, - GPIO_FN_D30, GPIO_FN_ED30, - GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2, - GPIO_FN_D31, GPIO_FN_ED31, - GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD, - GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC, - - - /* 49-5 (FN) */ - GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3, - GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK, - GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI, - GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD, - GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD, - GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3, - GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7, - GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR, - GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR, - GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0, - GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1, - GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON, - GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS, - GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD, - GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2, - GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2, - GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2, - GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1, - GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3, - GPIO_FN_MSIOF1_SS2, - GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT, - GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL, - GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3, - GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3, - GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1, - GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK, - GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC, - GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD, - GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW, - GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, - GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, - GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2, - GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD, - GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, - GPIO_FN_SDHICLK0, GPIO_FN_TCK2, - GPIO_FN_SDHICD0, - GPIO_FN_SDHID0_0, GPIO_FN_TMS2, - GPIO_FN_SDHID0_1, GPIO_FN_TDO2, - GPIO_FN_SDHID0_2, GPIO_FN_TDI2, - GPIO_FN_SDHID0_3, GPIO_FN_RTCK2, - - /* 49-6 (FN) */ - GPIO_FN_SDHICMD0, GPIO_FN_TRST2, - GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2, - GPIO_FN_SDHICLK1, GPIO_FN_TCK3, - GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, - GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3, - GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2, - GPIO_FN_TS_SDAT2, GPIO_FN_TDO3, - GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, - GPIO_FN_TS_SDEN2, GPIO_FN_TDI3, - GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, - GPIO_FN_TS_SCK2, GPIO_FN_RTCK3, - GPIO_FN_SDHICMD1, GPIO_FN_TRST3, - GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK, - GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD, - GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS, - GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD, - GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS, - GPIO_FN_SDHICMD2, - GPIO_FN_RESETOUTS, - GPIO_FN_DIVLOCK, -}; - -#endif /* __ASM_SH7367_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index eb98b45c5089..26cd1016fad8 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -452,6 +452,10 @@ enum { SHDMA_SLAVE_SCIF5_RX, SHDMA_SLAVE_SCIF6_TX, SHDMA_SLAVE_SCIF6_RX, + SHDMA_SLAVE_FLCTL0_TX, + SHDMA_SLAVE_FLCTL0_RX, + SHDMA_SLAVE_FLCTL1_TX, + SHDMA_SLAVE_FLCTL1_RX, SHDMA_SLAVE_SDHI0_RX, SHDMA_SLAVE_SDHI0_TX, SHDMA_SLAVE_SDHI1_RX, @@ -475,8 +479,6 @@ extern struct clk sh7372_dv_clki_div2_clk; extern struct clk sh7372_pllc2_clk; extern struct clk sh7372_fsiack_clk; extern struct clk sh7372_fsibck_clk; -extern struct clk sh7372_fsidiva_clk; -extern struct clk sh7372_fsidivb_clk; extern void sh7372_intcs_suspend(void); extern void sh7372_intcs_resume(void); diff --git a/arch/arm/mach-shmobile/include/mach/sh7377.h b/arch/arm/mach-shmobile/include/mach/sh7377.h deleted file mode 100644 index f580e227dd1c..000000000000 --- a/arch/arm/mach-shmobile/include/mach/sh7377.h +++ /dev/null @@ -1,360 +0,0 @@ -#ifndef __ASM_SH7377_H__ -#define __ASM_SH7377_H__ - -/* Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* 55-1 -> 55-5 (GPIO) */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, - - GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - - GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, - GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, - - GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, - GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, - - GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, - GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, - - GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, - GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, - - GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, - GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, - - GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, - GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, - - GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, - GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, - - GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU, - GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU, - GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU, - GPIO_FN_PORT72_KEYIN6_PU, - - /* 55-1 (FN) */ - GPIO_FN_VBUS_0, - GPIO_FN_CPORT0, - GPIO_FN_CPORT1, - GPIO_FN_CPORT2, - GPIO_FN_CPORT3, - GPIO_FN_CPORT4, - GPIO_FN_CPORT5, - GPIO_FN_CPORT6, - GPIO_FN_CPORT7, - GPIO_FN_CPORT8, - GPIO_FN_CPORT9, - GPIO_FN_CPORT10, - GPIO_FN_CPORT11, GPIO_FN_SIN2, - GPIO_FN_CPORT12, GPIO_FN_XCTS2, - GPIO_FN_CPORT13, GPIO_FN_RFSPO4, - GPIO_FN_CPORT14, GPIO_FN_RFSPO5, - GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2, - GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3, - GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2, - GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2, - GPIO_FN_CPORT19_MPORT1, - GPIO_FN_CPORT20, GPIO_FN_RFSPO6, - GPIO_FN_CPORT21, GPIO_FN_STATUS0, - GPIO_FN_CPORT22, GPIO_FN_STATUS1, - GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7, - GPIO_FN_B_SYNLD1, - GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK, - GPIO_FN_XMAINPS, - GPIO_FN_XDIVPS, - GPIO_FN_XIDRST, - GPIO_FN_IDCLK, GPIO_FN_IC_DP, - GPIO_FN_IDIO, GPIO_FN_IC_DM, - GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT, - GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, - GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK, - GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS, - GPIO_FN_PCMCLKO, - GPIO_FN_SYNC8KO, - - /* 55-2 (FN) */ - GPIO_FN_DNPCM_A, - GPIO_FN_UPPCM_A, - GPIO_FN_VACK, - GPIO_FN_XTALB1L, - GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS, - GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD, - GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS, - GPIO_FN_GPS_IM, - GPIO_FN_GPS_IS, - GPIO_FN_GPS_QM, - GPIO_FN_GPS_QS, - GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, - GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3, - GPIO_FN_FMSIOLR, - GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1, - GPIO_FN_FMSIOBT, - GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2, - GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, - GPIO_FN_OPORT3, GPIO_FN_FMSIILR, - GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, - GPIO_FN_FMSIIBT, - GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0, - GPIO_FN_A0_EA0, GPIO_FN_BS, - GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2, - GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2, - GPIO_FN_TPU0TO1, - GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5, - GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4, - GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1, - GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC, - GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD, - GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC, - GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD, - GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2, - GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6, - GPIO_FN_D0_ED0_NAF0, - GPIO_FN_D1_ED1_NAF1, - GPIO_FN_D2_ED2_NAF2, - GPIO_FN_D3_ED3_NAF3, - GPIO_FN_D4_ED4_NAF4, - GPIO_FN_D5_ED5_NAF5, - GPIO_FN_D6_ED6_NAF6, - GPIO_FN_D7_ED7_NAF7, - GPIO_FN_D8_ED8_NAF8, - GPIO_FN_D9_ED9_NAF9, - GPIO_FN_D10_ED10_NAF10, - GPIO_FN_D11_ED11_NAF11, - GPIO_FN_D12_ED12_NAF12, - GPIO_FN_D13_ED13_NAF13, - GPIO_FN_D14_ED14_NAF14, - GPIO_FN_D15_ED15_NAF15, - GPIO_FN_CS4, - GPIO_FN_CS5A, GPIO_FN_FMSICK, - GPIO_FN_CS5B, GPIO_FN_FCE1, - - /* 55-3 (FN) */ - GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0, - GPIO_FN_FCE0, - GPIO_FN_WAIT, GPIO_FN_DREQ0, - GPIO_FN_RD_XRD, - GPIO_FN_WE0_XWR0_FWE, - GPIO_FN_WE1_XWR1, - GPIO_FN_FRB, - GPIO_FN_CKO, - GPIO_FN_NBRSTOUT, - GPIO_FN_NBRST, - GPIO_FN_GPS_EPPSIN, - GPIO_FN_LATCHPULSE, - GPIO_FN_LTESIGNAL, - GPIO_FN_LEGACYSTATE, - GPIO_FN_TCKON, - GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0, - GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1, - GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD, - GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1, - GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2, - GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC, - GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD, - GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK, - GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2, - GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3, - GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC, - GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR, - GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2, - GPIO_FN_PORT140_FSIAOBT, - GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3, - GPIO_FN_PORT141_FSIAOSLD, - GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK, - GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR, - GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT, - GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD, - GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2, - GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5, - GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6, - GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1, - GPIO_FN_MFG0_IN2, - GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK, - GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1, - GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0, - GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1, - GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2, - GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD, - - /* 55-4 (FN) */ - GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, - GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI, - GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0, - GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0, - GPIO_FN_MFG3_IN2, - GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0, - GPIO_FN_MFG3_IN1, - GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0, - GPIO_FN_MFG3_OUT1, - GPIO_FN_TPU3TO0, - GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI, - GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS, - GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS, - GPIO_FN_BBIF2_TSCK1, - GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD, - GPIO_FN_BBIF2_TXD1, - GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD, - GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK, - GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1, - GPIO_FN_LCDD6, GPIO_FN_XWR2, - GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3, - GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16, - GPIO_FN_ED16, - GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17, - GPIO_FN_ED17, - GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18, - GPIO_FN_ED18, - GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19, - GPIO_FN_ED19, - GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20, - GPIO_FN_ED20, - GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21, - GPIO_FN_ED21, - GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22, - GPIO_FN_ED22, - GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0, - GPIO_FN_VIO_DR7, - GPIO_FN_D23, GPIO_FN_ED23, - GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1, - GPIO_FN_VIO_VDR, - GPIO_FN_D24, GPIO_FN_ED24, - GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25, - GPIO_FN_ED25, - GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26, - GPIO_FN_ED26, - GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27, - GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28, - GPIO_FN_ED28, - GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29, - GPIO_FN_ED29, - GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30, - GPIO_FN_ED30, - GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31, - GPIO_FN_ED31, - GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3, - GPIO_FN_VIO_CLKR, - GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC, - GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3, - GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4, - GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, - GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5, - GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, - GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, - GPIO_FN_MSIOF0L_TXD, - GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2, - GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM, - GPIO_FN_PORT226_VIO_CKO2, - GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN, - GPIO_FN_SCIFA1_RXD, - GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1, - GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC, - GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR, - GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT, - GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG, - GPIO_FN_PORT233_FSIACK, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD, - GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2, - GPIO_FN_PORT235_FSIAILR, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT, - GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD, - GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3, - - /* 55-5 (FN) */ - GPIO_FN_MSIOF1_SS2, - GPIO_FN_SCIFA6_TXD, - GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, - GPIO_FN_TPU4TO0, - GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2, - GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2, - GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS, - GPIO_FN_PORT244_MSIOF2_RXD, - GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS, - GPIO_FN_PORT245_MSIOF2_TXD, - GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, - GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0, - GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, - GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1, - GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, - GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, - GPIO_FN_PORT248_MSIOF2_TSCK, - GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC, - GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0, - GPIO_FN_SDHICD0, - GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0, - GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0, - GPIO_FN_SDHID0_2, GPIO_FN_TDI2, - GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0, - GPIO_FN_SDHICMD0, GPIO_FN_TRST2, - GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2, - GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1, - GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2, - GPIO_FN_TMS3_SWDIO_MC1, - GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2, - GPIO_FN_TDO3_SWO0_MC1, - GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3, - GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2, - GPIO_FN_RTCK3_SWO1_MC1, - GPIO_FN_SDHICMD1, GPIO_FN_TRST3, - GPIO_FN_RESETOUTS, -}; - -#endif /* __ASM_SH7377_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c deleted file mode 100644 index 5bf776495b75..000000000000 --- a/arch/arm/mach-shmobile/intc-sh7367.c +++ /dev/null @@ -1,413 +0,0 @@ -/* - * sh7367 processor support - INTC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/sh_intc.h> -#include <mach/intc.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -enum { - UNUSED_INTCA = 0, - ENABLED, - DISABLED, - - /* interrupt sources INTCA */ - DIRC, - CRYPT1_ERR, CRYPT2_STD, - IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, - ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX, - ETM11_ACQCMP, ETM11_FULL, - MFI_MFIM, MFI_MFIS, - BBIF1, BBIF2, - USBDMAC_USHDMI, - USBHS_USHI0, USBHS_USHI1, - CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, - KEYSC_KEY, - SCIFA0, SCIFA1, SCIFA2, SCIFA3, - MSIOF2, MSIOF1, - SCIFA4, SCIFA5, SCIFB, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - SDHI0, - SDHI1, - MSU_MSU, MSU_MSU2, - IREM, - SIU, - SPU, - IRDA, - TPU0, TPU1, TPU2, TPU3, TPU4, - LCRC, - PINT1, PINT2, - TTI20, - MISTY, - DDM, - SDHI2, - RWDT0, RWDT1, - DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3, - DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR, - DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, - DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, - DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, - DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, - - /* interrupt groups INTCA */ - DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, - ETM11, ARM11, USBHS, FLCTL, IIC1 -}; - -static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(DIRC, 0x0560), - INTC_VECT(CRYPT1_ERR, 0x05e0), - INTC_VECT(CRYPT2_STD, 0x0700), - INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), - INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), - INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840), - INTC_VECT(ARM11_COMMRX, 0x0860), - INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0), - INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), - INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), - INTC_VECT(USBDMAC_USHDMI, 0x0a00), - INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40), - INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), - INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), - INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), - INTC_VECT(KEYSC_KEY, 0x0be0), - INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), - INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), - INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), - INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), - INTC_VECT(SCIFB, 0x0d60), - INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), - INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), - INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20), - INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60), - INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0), - INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0), - INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40), - INTC_VECT(IREM, 0x0f60), - INTC_VECT(SIU, 0x0fa0), - INTC_VECT(SPU, 0x0fc0), - INTC_VECT(IRDA, 0x0480), - INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0), - INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500), - INTC_VECT(TPU4, 0x0520), - INTC_VECT(LCRC, 0x0540), - INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020), - INTC_VECT(TTI20, 0x1100), - INTC_VECT(MISTY, 0x1120), - INTC_VECT(DDM, 0x1140), - INTC_VECT(SDHI2, 0x1200), INTC_VECT(SDHI2, 0x1220), - INTC_VECT(SDHI2, 0x1240), INTC_VECT(SDHI2, 0x1260), - INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0), - INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020), - INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060), - INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0), - INTC_VECT(DMAC_2_DADERR, 0x20c0), - INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), - INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), - INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), - INTC_VECT(DMAC2_2_DADERR, 0x21c0), - INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), - INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), - INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), - INTC_VECT(DMAC3_2_DADERR, 0x22c0), -}; - -static struct intc_group intca_groups[] __initdata = { - INTC_GROUP(DMAC_1, DMAC_1_DEI0, - DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3), - INTC_GROUP(DMAC_2, DMAC_2_DEI4, - DMAC_2_DEI5, DMAC_2_DADERR), - INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, - DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), - INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, - DMAC2_2_DEI5, DMAC2_2_DADERR), - INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, - DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), - INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, - DMAC3_2_DEI5, DMAC3_2_DADERR), - INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL), - INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX), - INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1), - INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, - FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), - INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), -}; - -static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ - { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, - ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } }, - { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ - { CRYPT1_ERR, CRYPT2_STD, DIRC, 0, - DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } }, - { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ - { PINT1, PINT2, 0, 0, - BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, - { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ - { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, - DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, - { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ - { DDM, 0, 0, 0, - 0, 0, ETM11_FULL, ETM11_ACQCMP } }, - { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ - { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4, - SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, - { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ - { SCIFB, SCIFA5, SCIFA4, MSIOF1, - 0, 0, MSIOF2, 0 } }, - { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, - { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - TTI20, USBDMAC_USHDMI, SPU, SIU } }, - { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ - { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, - CMT2, USBHS_USHI1, USBHS_USHI0, 0 } }, - { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ - { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, - 0, 0, 0, 0 } }, - { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ - { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, - LCRC, MSU_MSU2, IREM, MSU_MSU } }, - { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ - { 0, 0, TPU0, TPU1, - TPU2, TPU3, TPU4, 0 } }, - { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - MISTY, CMT3, RWDT1, RWDT0 } }, -}; - -static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, - { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } }, - { 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD, - CMT1_CMT11, ARM11 } }, - { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2, - CMT1_CMT12, TPU4 } }, - { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS, - MFI_MFIM, USBHS } }, - { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2, - 0, CMT1_CMT10 } }, - { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, - SCIFA2, SCIFA3 } }, - { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI, - FLCTL, SDHI0 } }, - { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } }, - { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } }, - { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } }, - { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } }, - { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } }, - { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } }, - { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } }, -}; - -static struct intc_desc intca_desc __initdata = { - .name = "sh7367-intca", - .force_enable = ENABLED, - .force_disable = DISABLED, - .hw = INTC_HW_DESC(intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - NULL, NULL), -}; - -INTC_IRQ_PINS_16(intca_irq_pins, 0xe6900000, - INTC_VECT, "sh7367-intca-irq-pins"); - -enum { - UNUSED_INTCS = 0, - - INTCS, - - /* interrupt sources INTCS */ - VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3, - VIO3_VOU, - RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3, - VIO1_CEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2, - VPU, - SGX530, - _2DDMAC_2DDM0, _2DDMAC_2DDM1, _2DDMAC_2DDM2, _2DDMAC_2DDM3, - IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, - IPMMU_IPMMUB, IPMMU_IPMMUS, - RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR, - MSIOF, - IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, - TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, - CMT, - TSIF, - IPMMUI, - MVI3, - ICB, - PEP, - ASA, - BEM, - VE2HO, - HQE, - JPEG, - LCDC, - - /* interrupt groups INTCS */ - _2DDMAC, RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2, -}; - -static struct intc_vect intcs_vectors[] = { - INTCS_VECT(VIO2_VEU0, 0x700), INTCS_VECT(VIO2_VEU1, 0x720), - INTCS_VECT(VIO2_VEU2, 0x740), INTCS_VECT(VIO2_VEU3, 0x760), - INTCS_VECT(VIO3_VOU, 0x780), - INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820), - INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860), - INTCS_VECT(VIO1_CEU, 0x880), INTCS_VECT(VIO1_BEU0, 0x8a0), - INTCS_VECT(VIO1_BEU1, 0x8c0), INTCS_VECT(VIO1_BEU2, 0x8e0), - INTCS_VECT(VPU, 0x980), - INTCS_VECT(SGX530, 0x9e0), - INTCS_VECT(_2DDMAC_2DDM0, 0xa00), INTCS_VECT(_2DDMAC_2DDM1, 0xa20), - INTCS_VECT(_2DDMAC_2DDM2, 0xa40), INTCS_VECT(_2DDMAC_2DDM3, 0xa60), - INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), - INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), - INTCS_VECT(IPMMU_IPMMUB, 0xb20), INTCS_VECT(IPMMU_IPMMUS, 0xb60), - INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0), - INTCS_VECT(RTDMAC_2_DADERR, 0xbc0), - INTCS_VECT(MSIOF, 0xd20), - INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20), - INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60), - INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0), - INTCS_VECT(TMU_TUNI2, 0xec0), - INTCS_VECT(CMT, 0xf00), - INTCS_VECT(TSIF, 0xf20), - INTCS_VECT(IPMMUI, 0xf60), - INTCS_VECT(MVI3, 0x420), - INTCS_VECT(ICB, 0x480), - INTCS_VECT(PEP, 0x4a0), - INTCS_VECT(ASA, 0x4c0), - INTCS_VECT(BEM, 0x4e0), - INTCS_VECT(VE2HO, 0x520), - INTCS_VECT(HQE, 0x540), - INTCS_VECT(JPEG, 0x560), - INTCS_VECT(LCDC, 0x580), - - INTC_VECT(INTCS, 0xf80), -}; - -static struct intc_group intcs_groups[] __initdata = { - INTC_GROUP(_2DDMAC, _2DDMAC_2DDM0, _2DDMAC_2DDM1, - _2DDMAC_2DDM2, _2DDMAC_2DDM3), - INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1, - RTDMAC_1_DEI2, RTDMAC_1_DEI3), - INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR), - INTC_GROUP(VEU, VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3), - INTC_GROUP(BEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2), - INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), - INTC_GROUP(IPMMU, IPMMU_IPMMUS, IPMMU_IPMMUB), - INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), -}; - -static struct intc_mask_reg intcs_mask_registers[] = { - { 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */ - { VIO1_BEU2, VIO1_BEU1, VIO1_BEU0, VIO1_CEU, - VIO2_VEU3, VIO2_VEU2, VIO2_VEU1, VIO2_VEU0 } }, - { 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */ - { VIO3_VOU, 0, VE2HO, VPU, - 0, 0, 0, 0 } }, - { 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */ - { _2DDMAC_2DDM3, _2DDMAC_2DDM2, _2DDMAC_2DDM1, _2DDMAC_2DDM0, - BEM, ASA, PEP, ICB } }, - { 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */ - { 0, 0, MVI3, 0, - JPEG, HQE, 0, LCDC } }, - { 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */ - { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4, - RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, - { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ - { 0, 0, MSIOF, 0, - SGX530, 0, 0, 0 } }, - { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ - { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, - 0, 0, 0, 0 } }, - { 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */ - { 0, 0, 0, CMT, - IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, - { 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */ - { IPMMU_IPMMUS, 0, IPMMU_IPMMUB, 0, - 0, 0, 0, 0 } }, - { 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */ - { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, - 0, 0, IPMMUI, TSIF } }, - { 0xffd20104, 0, 16, /* INTAMASK */ - { 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, INTCS } }, -}; - -/* Priority is needed for INTCA to receive the INTCS interrupt */ -static struct intc_prio_reg intcs_prio_registers[] = { - { 0xffd20000, 0, 16, 4, /* IPRAS */ { 0, MVI3, _2DDMAC, ICB } }, - { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPEG, LCDC, 0, 0 } }, - { 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } }, - { 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, VIO1_CEU, 0, VPU } }, - { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT } }, - { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1, - TMU_TUNI2, 0 } }, - { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, VIO3_VOU, VEU, BEU } }, - { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, SGX530, 0, 0 } }, - { 0xffd20028, 0, 16, 4, /* IPRKS */ { BEM, ASA, IPMMUI, PEP } }, - { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, VE2HO, HQE } }, - { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, -}; - -static struct resource intcs_resources[] __initdata = { - [0] = { - .start = 0xffd20000, - .end = 0xffd2ffff, - .flags = IORESOURCE_MEM, - } -}; - -static struct intc_desc intcs_desc __initdata = { - .name = "sh7367-intcs", - .resource = intcs_resources, - .num_resources = ARRAY_SIZE(intcs_resources), - .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, - intcs_prio_registers, NULL, NULL), -}; - -static void intcs_demux(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *reg = (void *)irq_get_handler_data(irq); - unsigned int evtcodeas = ioread32(reg); - - generic_handle_irq(intcs_evt2irq(evtcodeas)); -} - -void __init sh7367_init_irq(void) -{ - void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - - register_intc_controller(&intca_desc); - register_intc_controller(&intca_irq_pins_desc); - register_intc_controller(&intcs_desc); - - /* demux using INTEVTSA */ - irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa); - irq_set_chained_handler(evt2irq(0xf80), intcs_demux); -} diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c deleted file mode 100644 index b84a460a3405..000000000000 --- a/arch/arm/mach-shmobile/intc-sh7377.c +++ /dev/null @@ -1,592 +0,0 @@ -/* - * sh7377 processor support - INTC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/sh_intc.h> -#include <mach/intc.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -enum { - UNUSED_INTCA = 0, - ENABLED, - DISABLED, - - /* interrupt sources INTCA */ - DIRC, - _2DG, - CRYPT_STD, - IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, - AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX, - MFI_MFIM, MFI_MFIS, - BBIF1, BBIF2, - USBDMAC_USHDMI, - USBHS_USHI0, USBHS_USHI1, - _3DG_SGX540, - CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, - KEYSC_KEY, - SCIFA0, SCIFA1, SCIFA2, SCIFA3, - MSIOF2, MSIOF1, - SCIFA4, SCIFA5, SCIFB, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - SDHI0, - SDHI1, - MSU_MSU, MSU_MSU2, - IRREM, - MSUG, - IRDA, - TPU0, TPU1, TPU2, TPU3, TPU4, - LCRC, - PINTCA_PINT1, PINTCA_PINT2, - TTI20, - MISTY, - DDM, - RWDT0, RWDT1, - DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3, - DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR, - DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, - DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, - DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, - DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, - SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, - ICUSB_ICUSB0, ICUSB_ICUSB1, - ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, - SPU2_SPU0, SPU2_SPU1, - FSI, - FMSI, - SCUV, - IPMMU_IPMMUB, - AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ, - MFIS2, - CPORTR2S, - CMT14, CMT15, - SCIFA6, - - /* interrupt groups INTCA */ - DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT, - AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1, - ICUSB, ICUDMC -}; - -static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(DIRC, 0x0560), - INTC_VECT(_2DG, 0x05e0), - INTC_VECT(CRYPT_STD, 0x0700), - INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), - INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), - INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840), - INTC_VECT(AP_ARM_COMMRX, 0x0860), - INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), - INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), - INTC_VECT(USBDMAC_USHDMI, 0x0a00), - INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40), - INTC_VECT(_3DG_SGX540, 0x0a60), - INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), - INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), - INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), - INTC_VECT(KEYSC_KEY, 0x0be0), - INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), - INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), - INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), - INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), - INTC_VECT(SCIFB, 0x0d60), - INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), - INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), - INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20), - INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60), - INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0), - INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0), - INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40), - INTC_VECT(IRREM, 0x0f60), - INTC_VECT(MSUG, 0x0fa0), - INTC_VECT(IRDA, 0x0480), - INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0), - INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500), - INTC_VECT(TPU4, 0x0520), - INTC_VECT(LCRC, 0x0540), - INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020), - INTC_VECT(TTI20, 0x1100), - INTC_VECT(MISTY, 0x1120), - INTC_VECT(DDM, 0x1140), - INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0), - INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020), - INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060), - INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0), - INTC_VECT(DMAC_2_DADERR, 0x20c0), - INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), - INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), - INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), - INTC_VECT(DMAC2_2_DADERR, 0x21c0), - INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), - INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), - INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), - INTC_VECT(DMAC3_2_DADERR, 0x22c0), - INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20), - INTC_VECT(SHWYSTAT_COM, 0x1340), - INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720), - INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0), - INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820), - INTC_VECT(FSI, 0x1840), - INTC_VECT(FMSI, 0x1860), - INTC_VECT(SCUV, 0x1880), - INTC_VECT(IPMMU_IPMMUB, 0x1900), - INTC_VECT(AP_ARM_CTIIRQ, 0x1980), - INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0), - INTC_VECT(AP_ARM_DMAIRQ, 0x19c0), - INTC_VECT(AP_ARM_DMASIRQ, 0x19e0), - INTC_VECT(MFIS2, 0x1a00), - INTC_VECT(CPORTR2S, 0x1a20), - INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60), - INTC_VECT(SCIFA6, 0x1a80), -}; - -static struct intc_group intca_groups[] __initdata = { - INTC_GROUP(DMAC_1, DMAC_1_DEI0, - DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3), - INTC_GROUP(DMAC_2, DMAC_2_DEI4, - DMAC_2_DEI5, DMAC_2_DADERR), - INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, - DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), - INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, - DMAC2_2_DEI5, DMAC2_2_DADERR), - INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, - DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), - INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, - DMAC3_2_DEI5, DMAC3_2_DADERR), - INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX), - INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1), - INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1), - INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, - FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), - INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), - INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM), - INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1), - INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2), -}; - -static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ - { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, - AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } }, - { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ - { _2DG, CRYPT_STD, DIRC, 0, - DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } }, - { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ - { PINTCA_PINT1, PINTCA_PINT2, 0, 0, - BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, - { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ - { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, - DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, - { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ - { DDM, 0, 0, 0, - 0, 0, 0, 0 } }, - { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ - { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4, - SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, - { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ - { SCIFB, SCIFA5, SCIFA4, MSIOF1, - 0, 0, MSIOF2, 0 } }, - { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, - { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - TTI20, USBDMAC_USHDMI, 0, MSUG } }, - { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ - { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, - CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } }, - { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ - { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, - 0, 0, 0, 0 } }, - { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ - { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, - LCRC, MSU_MSU2, IRREM, MSU_MSU } }, - { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ - { 0, 0, TPU0, TPU1, - TPU2, TPU3, TPU4, 0 } }, - { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ - { 0, 0, 0, 0, - MISTY, CMT3, RWDT1, RWDT0 } }, - { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */ - { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0, - 0, 0, 0, 0 } }, - { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */ - { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0, - ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } }, - { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */ - { SPU2_SPU0, SPU2_SPU1, FSI, FMSI, - SCUV, 0, 0, 0 } }, - { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */ - { IPMMU_IPMMUB, 0, 0, 0, - AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, - AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } }, - { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */ - { MFIS2, CPORTR2S, CMT14, CMT15, - SCIFA6, 0, 0, 0 } }, -}; - -static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, - { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } }, - { 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD, - CMT1_CMT11, AP_ARM1 } }, - { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2, - CMT1_CMT12, TPU4 } }, - { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS, - MFI_MFIM, USBHS } }, - { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2, - _3DG_SGX540, CMT1_CMT10 } }, - { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, - SCIFA2, SCIFA3 } }, - { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI, - FLCTL, SDHI0 } }, - { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } }, - { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } }, - { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } }, - { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } }, - { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } }, - { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } }, - { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } }, - { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } }, - { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } }, - { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } }, - { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } }, - { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } }, - { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } }, - { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, - { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, - CMT14, CMT15 } }, - { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } }, -}; - -static struct intc_desc intca_desc __initdata = { - .name = "sh7377-intca", - .force_enable = ENABLED, - .force_disable = DISABLED, - .hw = INTC_HW_DESC(intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - NULL, NULL), -}; - -INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, - INTC_VECT, "sh7377-intca-irq-pins"); - -/* this macro ignore entry which is also in INTCA */ -#define __IGNORE(a...) -#define __IGNORE0(a...) 0 - -enum { - UNUSED_INTCS = 0, - - INTCS, - - /* interrupt sources INTCS */ - VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3, - RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, RTDMAC1_1_DEI2, RTDMAC1_1_DEI3, - CEU, - BEU_BEU0, BEU_BEU1, BEU_BEU2, - __IGNORE(MFI) - __IGNORE(BBIF2) - VPU, - TSIF1, - __IGNORE(SGX540) - _2DDMAC, - IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, - IPMMU_IPMMUR, IPMMU_IPMMUR2, - RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR, - __IGNORE(KEYSC) - __IGNORE(TTI20) - __IGNORE(MSIOF) - IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, - TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, - CMT0, - TSIF0, - __IGNORE(CMT2) - LMB, - __IGNORE(MSUG) - __IGNORE(MSU_MSU, MSU_MSU2) - __IGNORE(CTI) - MVI3, - __IGNORE(RWDT0) - __IGNORE(RWDT1) - ICB, - PEP, - ASA, - __IGNORE(_2DG) - HQE, - JPU, - LCDC0, - __IGNORE(LCRC) - RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, - RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, - FRC, - LCDC1, - CSIRX, - DSITX_DSITX0, DSITX_DSITX1, - __IGNORE(SPU2_SPU0, SPU2_SPU1) - __IGNORE(FSI) - __IGNORE(FMSI) - __IGNORE(SCUV) - TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, - TSIF2, - CMT4, - __IGNORE(MFIS2) - CPORTS2R, - - /* interrupt groups INTCS */ - RTDMAC1_1, RTDMAC1_2, VEU, BEU, IIC0, __IGNORE(MSU) IPMMU, - IIC2, RTDMAC2_1, RTDMAC2_2, DSITX, __IGNORE(SPU2) TMU1, -}; - -#define INTCS_INTVECT 0x0F80 -static struct intc_vect intcs_vectors[] __initdata = { - INTCS_VECT(VEU_VEU0, 0x0700), INTCS_VECT(VEU_VEU1, 0x0720), - INTCS_VECT(VEU_VEU2, 0x0740), INTCS_VECT(VEU_VEU3, 0x0760), - INTCS_VECT(RTDMAC1_1_DEI0, 0x0800), INTCS_VECT(RTDMAC1_1_DEI1, 0x0820), - INTCS_VECT(RTDMAC1_1_DEI2, 0x0840), INTCS_VECT(RTDMAC1_1_DEI3, 0x0860), - INTCS_VECT(CEU, 0x0880), - INTCS_VECT(BEU_BEU0, 0x08A0), - INTCS_VECT(BEU_BEU1, 0x08C0), - INTCS_VECT(BEU_BEU2, 0x08E0), - __IGNORE(INTCS_VECT(MFI, 0x0900)) - __IGNORE(INTCS_VECT(BBIF2, 0x0960)) - INTCS_VECT(VPU, 0x0980), - INTCS_VECT(TSIF1, 0x09A0), - __IGNORE(INTCS_VECT(SGX540, 0x09E0)) - INTCS_VECT(_2DDMAC, 0x0A00), - INTCS_VECT(IIC2_ALI2, 0x0A80), INTCS_VECT(IIC2_TACKI2, 0x0AA0), - INTCS_VECT(IIC2_WAITI2, 0x0AC0), INTCS_VECT(IIC2_DTEI2, 0x0AE0), - INTCS_VECT(IPMMU_IPMMUR, 0x0B00), INTCS_VECT(IPMMU_IPMMUR2, 0x0B20), - INTCS_VECT(RTDMAC1_2_DEI4, 0x0B80), - INTCS_VECT(RTDMAC1_2_DEI5, 0x0BA0), - INTCS_VECT(RTDMAC1_2_DADERR, 0x0BC0), - __IGNORE(INTCS_VECT(KEYSC 0x0BE0)) - __IGNORE(INTCS_VECT(TTI20, 0x0C80)) - __IGNORE(INTCS_VECT(MSIOF, 0x0D20)) - INTCS_VECT(IIC0_ALI0, 0x0E00), INTCS_VECT(IIC0_TACKI0, 0x0E20), - INTCS_VECT(IIC0_WAITI0, 0x0E40), INTCS_VECT(IIC0_DTEI0, 0x0E60), - INTCS_VECT(TMU_TUNI0, 0x0E80), - INTCS_VECT(TMU_TUNI1, 0x0EA0), - INTCS_VECT(TMU_TUNI2, 0x0EC0), - INTCS_VECT(CMT0, 0x0F00), - INTCS_VECT(TSIF0, 0x0F20), - __IGNORE(INTCS_VECT(CMT2, 0x0F40)) - INTCS_VECT(LMB, 0x0F60), - __IGNORE(INTCS_VECT(MSUG, 0x0F80)) - __IGNORE(INTCS_VECT(MSU_MSU, 0x0FA0)) - __IGNORE(INTCS_VECT(MSU_MSU2, 0x0FC0)) - __IGNORE(INTCS_VECT(CTI, 0x0400)) - INTCS_VECT(MVI3, 0x0420), - __IGNORE(INTCS_VECT(RWDT0, 0x0440)) - __IGNORE(INTCS_VECT(RWDT1, 0x0460)) - INTCS_VECT(ICB, 0x0480), - INTCS_VECT(PEP, 0x04A0), - INTCS_VECT(ASA, 0x04C0), - __IGNORE(INTCS_VECT(_2DG, 0x04E0)) - INTCS_VECT(HQE, 0x0540), - INTCS_VECT(JPU, 0x0560), - INTCS_VECT(LCDC0, 0x0580), - __IGNORE(INTCS_VECT(LCRC, 0x05A0)) - INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320), - INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360), - INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13A0), - INTCS_VECT(RTDMAC2_2_DADERR, 0x13C0), - INTCS_VECT(FRC, 0x1700), - INTCS_VECT(LCDC1, 0x1780), - INTCS_VECT(CSIRX, 0x17A0), - INTCS_VECT(DSITX_DSITX0, 0x17C0), INTCS_VECT(DSITX_DSITX1, 0x17E0), - __IGNORE(INTCS_VECT(SPU2_SPU0, 0x1800)) - __IGNORE(INTCS_VECT(SPU2_SPU1, 0x1820)) - __IGNORE(INTCS_VECT(FSI, 0x1840)) - __IGNORE(INTCS_VECT(FMSI, 0x1860)) - __IGNORE(INTCS_VECT(SCUV, 0x1880)) - INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920), - INTCS_VECT(TMU1_TUNI12, 0x1940), - INTCS_VECT(TSIF2, 0x1960), - INTCS_VECT(CMT4, 0x1980), - __IGNORE(INTCS_VECT(MFIS2, 0x1A00)) - INTCS_VECT(CPORTS2R, 0x1A20), - - INTC_VECT(INTCS, INTCS_INTVECT), -}; - -static struct intc_group intcs_groups[] __initdata = { - INTC_GROUP(RTDMAC1_1, - RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, - RTDMAC1_1_DEI2, RTDMAC1_1_DEI3), - INTC_GROUP(RTDMAC1_2, - RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR), - INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3), - INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2), - INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), - __IGNORE(INTC_GROUP(MSU, MSU_MSU, MSU_MSU2)) - INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2), - INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), - INTC_GROUP(RTDMAC2_1, - RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, - RTDMAC2_1_DEI2, RTDMAC2_1_DEI3), - INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR), - INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1), - __IGNORE(INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1)) - INTC_GROUP(TMU1, TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12), -}; - -static struct intc_mask_reg intcs_mask_registers[] __initdata = { - { 0xE6940184, 0xE69401C4, 8, /* IMR1AS / IMCR1AS */ - { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU, - VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } }, - { 0xE6940188, 0xE69401C8, 8, /* IMR2AS / IMCR2AS */ - { 0, 0, 0, VPU, - __IGNORE0(BBIF2), 0, 0, __IGNORE0(MFI) } }, - { 0xE694018C, 0xE69401CC, 8, /* IMR3AS / IMCR3AS */ - { 0, 0, 0, _2DDMAC, - __IGNORE0(_2DG), ASA, PEP, ICB } }, - { 0xE6940190, 0xE69401D0, 8, /* IMR4AS / IMCR4AS */ - { 0, 0, MVI3, __IGNORE0(CTI), - JPU, HQE, __IGNORE0(LCRC), LCDC0 } }, - { 0xE6940194, 0xE69401D4, 8, /* IMR5AS / IMCR5AS */ - { __IGNORE0(KEYSC), RTDMAC1_2_DADERR, RTDMAC1_2_DEI5, RTDMAC1_2_DEI4, - RTDMAC1_1_DEI3, RTDMAC1_1_DEI2, RTDMAC1_1_DEI1, RTDMAC1_1_DEI0 } }, - __IGNORE({ 0xE6940198, 0xE69401D8, 8, /* IMR6AS / IMCR6AS */ - { 0, 0, MSIOF, 0, - SGX540, 0, TTI20, 0 } }) - { 0xE694019C, 0xE69401DC, 8, /* IMR7AS / IMCR7AS */ - { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, - 0, 0, 0, 0 } }, - __IGNORE({ 0xE69401A0, 0xE69401E0, 8, /* IMR8AS / IMCR8AS */ - { 0, 0, 0, 0, - 0, MSU_MSU, MSU_MSU2, MSUG } }) - { 0xE69401A4, 0xE69401E4, 8, /* IMR9AS / IMCR9AS */ - { __IGNORE0(RWDT1), __IGNORE0(RWDT0), __IGNORE0(CMT2), CMT0, - IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, - { 0xE69401A8, 0xE69401E8, 8, /* IMR10AS / IMCR10AS */ - { 0, 0, IPMMU_IPMMUR, IPMMU_IPMMUR2, - 0, 0, 0, 0 } }, - { 0xE69401AC, 0xE69401EC, 8, /* IMR11AS / IMCR11AS */ - { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, - 0, TSIF1, LMB, TSIF0 } }, - { 0xE6950180, 0xE69501C0, 8, /* IMR0AS3 / IMCR0AS3 */ - { RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, - RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, 0 } }, - { 0xE6950190, 0xE69501D0, 8, /* IMR4AS3 / IMCR4AS3 */ - { FRC, 0, 0, 0, - LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } }, - __IGNORE({ 0xE6950194, 0xE69501D4, 8, /* IMR5AS3 / IMCR5AS3 */ - {SPU2_SPU0, SPU2_SPU1, FSI, FMSI, - SCUV, 0, 0, 0 } }) - { 0xE6950198, 0xE69501D8, 8, /* IMR6AS3 / IMCR6AS3 */ - { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, TSIF2, - CMT4, 0, 0, 0 } }, - { 0xE695019C, 0xE69501DC, 8, /* IMR7AS3 / IMCR7AS3 */ - { __IGNORE0(MFIS2), CPORTS2R, 0, 0, - 0, 0, 0, 0 } }, - { 0xFFD20104, 0, 16, /* INTAMASK */ - { 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, INTCS } } -}; - -static struct intc_prio_reg intcs_prio_registers[] __initdata = { - /* IPRAS */ - { 0xFFD20000, 0, 16, 4, { __IGNORE0(CTI), MVI3, _2DDMAC, ICB } }, - /* IPRBS */ - { 0xFFD20004, 0, 16, 4, { JPU, LCDC0, 0, __IGNORE0(LCRC) } }, - /* IPRCS */ - __IGNORE({ 0xFFD20008, 0, 16, 4, { BBIF2, 0, 0, 0 } }) - /* IPRES */ - { 0xFFD20010, 0, 16, 4, { RTDMAC1_1, CEU, __IGNORE0(MFI), VPU } }, - /* IPRFS */ - { 0xFFD20014, 0, 16, 4, - { __IGNORE0(KEYSC), RTDMAC1_2, __IGNORE0(CMT2), CMT0 } }, - /* IPRGS */ - { 0xFFD20018, 0, 16, 4, { TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, TSIF1 } }, - /* IPRHS */ - { 0xFFD2001C, 0, 16, 4, { __IGNORE0(TTI20), 0, VEU, BEU } }, - /* IPRIS */ - { 0xFFD20020, 0, 16, 4, { 0, __IGNORE0(MSIOF), TSIF0, IIC0 } }, - /* IPRJS */ - __IGNORE({ 0xFFD20024, 0, 16, 4, { 0, SGX540, MSUG, MSU } }) - /* IPRKS */ - { 0xFFD20028, 0, 16, 4, { __IGNORE0(_2DG), ASA, LMB, PEP } }, - /* IPRLS */ - { 0xFFD2002C, 0, 16, 4, { IPMMU, 0, 0, HQE } }, - /* IPRMS */ - { 0xFFD20030, 0, 16, 4, - { IIC2, 0, __IGNORE0(RWDT1), __IGNORE0(RWDT0) } }, - /* IPRAS3 */ - { 0xFFD50000, 0, 16, 4, { RTDMAC2_1, 0, 0, 0 } }, - /* IPRBS3 */ - { 0xFFD50004, 0, 16, 4, { RTDMAC2_2, 0, 0, 0 } }, - /* IPRIS3 */ - { 0xFFD50020, 0, 16, 4, { FRC, 0, 0, 0 } }, - /* IPRJS3 */ - { 0xFFD50024, 0, 16, 4, { LCDC1, CSIRX, DSITX, 0 } }, - /* IPRKS3 */ - __IGNORE({ 0xFFD50028, 0, 16, 4, { SPU2, 0, FSI, FMSI } }) - /* IPRLS3 */ - __IGNORE({ 0xFFD5002C, 0, 16, 4, { SCUV, 0, 0, 0 } }) - /* IPRMS3 */ - { 0xFFD50030, 0, 16, 4, { TMU1, 0, 0, TSIF2 } }, - /* IPRNS3 */ - { 0xFFD50034, 0, 16, 4, { CMT4, 0, 0, 0 } }, - /* IPROS3 */ - { 0xFFD50038, 0, 16, 4, { __IGNORE0(MFIS2), CPORTS2R, 0, 0 } }, -}; - -static struct resource intcs_resources[] __initdata = { - [0] = { - .start = 0xffd20000, - .end = 0xffd500ff, - .flags = IORESOURCE_MEM, - } -}; - -static struct intc_desc intcs_desc __initdata = { - .name = "sh7377-intcs", - .resource = intcs_resources, - .num_resources = ARRAY_SIZE(intcs_resources), - .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, - intcs_mask_registers, intcs_prio_registers, - NULL, NULL), -}; - -static void intcs_demux(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *reg = (void *)irq_get_handler_data(irq); - unsigned int evtcodeas = ioread32(reg); - - generic_handle_irq(intcs_evt2irq(evtcodeas)); -} - -#define INTEVTSA 0xFFD20100 -void __init sh7377_init_irq(void) -{ - void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE); - - register_intc_controller(&intca_desc); - register_intc_controller(&intca_irq_pins_desc); - register_intc_controller(&intcs_desc); - - /* demux using INTEVTSA */ - irq_set_handler_data(evt2irq(INTCS_INTVECT), (void *)intevtsa); - irq_set_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux); -} diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index cbc26ba2a0a2..9513234d322b 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -140,7 +140,7 @@ enum { FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10, FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12, FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4, - FN_IP8_11_8, FN_IP8_15_12, FN_PENC0, FN_PENC1, + FN_IP8_11_8, FN_IP8_15_12, FN_USB_PENC0, FN_USB_PENC1, FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19, /* GPSR5 */ @@ -176,7 +176,7 @@ enum { FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3, FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2, FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C, - FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, + FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, FN_SCIF_CLK, FN_TCLK0_C, /* IPSR1 */ @@ -447,7 +447,7 @@ enum { A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK, BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK, ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK, - PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK, + USB_PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK, SCIF_CLK_MARK, TCLK0_C_MARK, EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK, @@ -658,7 +658,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(A18_MARK, FN_A18), PINMUX_DATA(A19_MARK, FN_A19), - PINMUX_IPSR_DATA(IP0_2_0, PENC2), + PINMUX_IPSR_DATA(IP0_2_0, USB_PENC2), PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0), PINMUX_IPSR_DATA(IP0_2_0, PWM1), PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0), @@ -1456,7 +1456,7 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(A19), /* IPSR0 */ - GPIO_FN(PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0), + GPIO_FN(USB_PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0), GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2), GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF), GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3), @@ -1865,8 +1865,8 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { GP_4_30_FN, FN_IP8_18, GP_4_29_FN, FN_IP8_17_16, GP_4_28_FN, FN_IP0_2_0, - GP_4_27_FN, FN_PENC1, - GP_4_26_FN, FN_PENC0, + GP_4_27_FN, FN_USB_PENC1, + GP_4_26_FN, FN_USB_PENC0, GP_4_25_FN, FN_IP8_15_12, GP_4_24_FN, FN_IP8_11_8, GP_4_23_FN, FN_IP8_7_4, @@ -1981,7 +1981,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2, FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C, /* IP0_2_0 [3] */ - FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, + FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, FN_SCIF_CLK, FN_TCLK0_C, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32, diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c deleted file mode 100644 index c0c137f39052..000000000000 --- a/arch/arm/mach-shmobile/pfc-sh7367.c +++ /dev/null @@ -1,1727 +0,0 @@ -/* - * sh7367 processor support - PFC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sh_pfc.h> -#include <mach/sh7367.h> - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ - PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \ - PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \ - PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \ - PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \ - PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx), \ - PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx) - -enum { - PINMUX_RESERVED = 0, - - PINMUX_DATA_BEGIN, - PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */ - PINMUX_DATA_END, - - PINMUX_INPUT_BEGIN, - PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */ - PINMUX_INPUT_END, - - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */ - PINMUX_INPUT_PULLUP_END, - - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */ - PINMUX_INPUT_PULLDOWN_END, - - PINMUX_OUTPUT_BEGIN, - PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */ - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */ - PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */ - PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */ - PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */ - PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */ - PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */ - PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */ - PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */ - PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */ - PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */ - - MSELBCR_MSEL2_1, MSELBCR_MSEL2_0, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - /* Special Pull-up / Pull-down Functions */ - PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK, - PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK, - PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK, - PORT58_KEYIN6_PU_MARK, - - /* 49-1 */ - VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK, - CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK, - CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK, - CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK, - CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK, - CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK, - CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK, - RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK, - STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK, - MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK, - XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK, - IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK, - M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK, - XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK, - XCTS1_MARK, SCIFA4_CTS_MARK, - - /* 49-2 */ - HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK, - HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK, - HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK, - HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK, - HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK, - HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK, - HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK, - HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK, - HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK, - HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK, - HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK, - HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK, - HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK, - HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK, - HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK, - HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK, - B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK, - HSU_SDI_MARK, PORT55_KEYIN3_MARK, - HSU_SCO_MARK, PORT56_KEYIN4_MARK, - HSU_DREQ_MARK, PORT57_KEYIN5_MARK, - HSU_DACK_MARK, PORT58_KEYIN6_MARK, - HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK, - HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK, - PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK, - XTALB1L_MARK, - GPS_AGC1_MARK, SCIFA0_RTS_MARK, - GPS_AGC2_MARK, SCIFA0_SCK_MARK, - GPS_AGC3_MARK, SCIFA0_TXD_MARK, - GPS_AGC4_MARK, SCIFA0_RXD_MARK, - GPS_PWRD_MARK, SCIFA0_CTS_MARK, - GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK, - SIUBOMC_MARK, TPU2TO0_MARK, - SIUCKB_MARK, TPU2TO1_MARK, - SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK, - SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK, - SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK, - SIUBILR_MARK, TPU3TO1_MARK, - SIUBIBT_MARK, TPU3TO2_MARK, - SIUBISLD_MARK, TPU3TO3_MARK, - NMI_MARK, TPU4TO0_MARK, - DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK, - IRQ_TMPB_MARK, - PWEN_MARK, MFG1_OUT1_MARK, - OVCN_MARK, MFG1_IN1_MARK, - OVCN2_MARK, MFG1_IN2_MARK, - - /* 49-3 */ - RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK, - USBTERM_MARK, EXTLP_MARK, IDIN_MARK, - SCIFA5_CTS_MARK, MFG0_IN1_MARK, - SCIFA5_RTS_MARK, MFG0_IN2_MARK, - SCIFA5_RXD_MARK, - SCIFA5_TXD_MARK, - SCIFA5_SCK_MARK, MFG0_OUT1_MARK, - A0_EA0_MARK, BS_MARK, - A14_EA14_MARK, PORT102_KEYOUT0_MARK, - A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK, - A16_EA16_MARK, PORT104_KEYOUT2_MARK, - DV_VSYNCL_MARK, MSIOF0_SS1_MARK, - A17_EA17_MARK, PORT105_KEYOUT3_MARK, - DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK, - A18_EA18_MARK, PORT106_KEYOUT4_MARK, - DV_DL0_MARK, MSIOF0_TSCK_MARK, - A19_EA19_MARK, PORT107_KEYOUT5_MARK, - DV_DL1_MARK, MSIOF0_TXD_MARK, - A20_EA20_MARK, PORT108_KEYIN0_MARK, - DV_DL2_MARK, MSIOF0_RSCK_MARK, - A21_EA21_MARK, PORT109_KEYIN1_MARK, - DV_DL3_MARK, MSIOF0_RSYNC_MARK, - A22_EA22_MARK, PORT110_KEYIN2_MARK, - DV_DL4_MARK, MSIOF0_MCK0_MARK, - A23_EA23_MARK, PORT111_KEYIN3_MARK, - DV_DL5_MARK, MSIOF0_MCK1_MARK, - A24_EA24_MARK, PORT112_KEYIN4_MARK, - DV_DL6_MARK, MSIOF0_RXD_MARK, - A25_EA25_MARK, PORT113_KEYIN5_MARK, - DV_DL7_MARK, MSIOF0_SS2_MARK, - A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK, - D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK, - D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK, - D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK, - D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK, - D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK, - D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK, - CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK, - CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK, - DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK, - A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK, - WE1_XWR1_MARK, FRB_MARK, CKO_MARK, - NBRSTOUT_MARK, NBRST_MARK, - - /* 49-4 */ - RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK, - VIO_VD_MARK, VIO_HD_MARK, - VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK, - VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK, - VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK, - VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK, - VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK, - VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK, - VIO_CKO_MARK, - MFG3_IN1_MARK, MFG3_IN2_MARK, - M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK, - M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK, - M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK, - M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK, - LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK, - SIUCKA_MARK, MFG0_OUT2_MARK, - LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK, - SIUAOLR_MARK, BBIF2_TSYNC1_MARK, - LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK, - SIUAOBT_MARK, BBIF2_TSCK1_MARK, - LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK, - SIUAOSLD_MARK, BBIF2_TXD1_MARK, - LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK, - SIUAISPD_MARK, MFG1_OUT2_MARK, - LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK, - SIUAILR_MARK, MFG2_OUT2_MARK, - LCDD6_MARK, DV_D6_MARK, - SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK, - LCDD7_MARK, DV_D7_MARK, - SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK, - LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK, - LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK, - LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK, - LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK, - LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK, - LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK, - LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK, - LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK, - LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK, - LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK, - LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK, - D26_MARK, ED26_MARK, - LCDD19_MARK, MSIOF0L_TSYNC_MARK, - D27_MARK, ED27_MARK, - LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, - D28_MARK, ED28_MARK, - LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, - D29_MARK, ED29_MARK, - LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK, - D30_MARK, ED30_MARK, - LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK, - D31_MARK, ED31_MARK, - LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK, - LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK, - - /* 49-5 */ - LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK, - LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK, - LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK, - LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK, - LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK, - VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK, - VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK, - VIO_VDR_MARK, VIO_HDR_MARK, - VIO_CLKR_MARK, VIO_CKOR_MARK, - SCIFA1_TXD_MARK, GPS_PGFA0_MARK, - SCIFA1_SCK_MARK, GPS_PGFA1_MARK, - SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK, - SCIFA1_RXD_MARK, SCIFA1_CTS_MARK, - MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK, - MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK, - MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK, - MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK, - MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK, - MSIOF1_RSYNC_MARK, I2C_SCL2_MARK, - MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK, - MSIOF1_SS1_MARK, EDBGREQ3_MARK, - MSIOF1_SS2_MARK, - PORT236_IROUT_MARK, IRDA_OUT_MARK, - IRDA_IN_MARK, IRDA_FIRSEL_MARK, - TPU1TO0_MARK, TS_SPSYNC3_MARK, - TPU1TO1_MARK, TS_SDAT3_MARK, - TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK, - TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK, - M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK, - M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK, - PORT245_IROUT_MARK, M15_RSW_MARK, - SOUT3_MARK, SCIFA2_TXD1_MARK, - SIN3_MARK, SCIFA2_RXD1_MARK, - XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK, - XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK, - DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, - SDHICLK0_MARK, TCK2_MARK, - SDHICD0_MARK, - SDHID0_0_MARK, TMS2_MARK, - SDHID0_1_MARK, TDO2_MARK, - SDHID0_2_MARK, TDI2_MARK, - SDHID0_3_MARK, RTCK2_MARK, - - /* 49-6 */ - SDHICMD0_MARK, TRST2_MARK, - SDHIWP0_MARK, EDBGREQ2_MARK, - SDHICLK1_MARK, TCK3_MARK, - SDHID1_0_MARK, M11_SLCD_SO2_MARK, - TS_SPSYNC2_MARK, TMS3_MARK, - SDHID1_1_MARK, M9_SLCD_AO2_MARK, - TS_SDAT2_MARK, TDO3_MARK, - SDHID1_2_MARK, M10_SLCD_CK2_MARK, - TS_SDEN2_MARK, TDI3_MARK, - SDHID1_3_MARK, M12_SLCD_CE2_MARK, - TS_SCK2_MARK, RTCK3_MARK, - SDHICMD1_MARK, TRST3_MARK, - SDHICLK2_MARK, SCIFB_SCK_MARK, - SDHID2_0_MARK, SCIFB_TXD_MARK, - SDHID2_1_MARK, SCIFB_CTS_MARK, - SDHID2_2_MARK, SCIFB_RXD_MARK, - SDHID2_3_MARK, SCIFB_RTS_MARK, - SDHICMD2_MARK, - RESETOUTS_MARK, - DIVLOCK_MARK, - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - - /* specify valid pin states for each pin in GPIO mode */ - - /* 49-1 (GPIO) */ - PORT_DATA_I_PD(0), - PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3), - PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6), - PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9), - PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12), - PORT_DATA_I_PU(13), - PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15), - PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19), - PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23), - PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26), - PORT_DATA_I_PD(27), PORT_DATA_I_PD(28), - PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32), - PORT_DATA_IO_PU(33), - PORT_DATA_O(34), - PORT_DATA_I_PU(35), - PORT_DATA_O(36), - PORT_DATA_I_PU_PD(37), - - /* 49-2 (GPIO) */ - PORT_DATA_IO_PU_PD(38), - PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41), - PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45), - PORT_DATA_O(46), PORT_DATA_O(47), - PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50), - PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52), - PORT_DATA_O(53), - PORT_DATA_IO_PD(54), - PORT_DATA_I_PU_PD(55), - PORT_DATA_IO_PU_PD(56), - PORT_DATA_I_PU_PD(57), - PORT_DATA_IO_PU_PD(58), - PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62), - PORT_DATA_O(63), - PORT_DATA_I_PU(64), - PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68), - PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70), - PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73), - PORT_DATA_I_PD(74), - PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76), - PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78), - PORT_DATA_O(79), - PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82), - PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84), - PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86), - PORT_DATA_I_PD(87), - PORT_DATA_IO_PU_PD(88), - PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90), - - /* 49-3 (GPIO) */ - PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94), - PORT_DATA_I_PU_PD(95), - PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98), - PORT_DATA_IO_PU_PD(99), PORT_DATA_IO_PU_PD(100), - PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103), - PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106), - PORT_DATA_IO_PD(107), - PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109), - PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111), - PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113), - PORT_DATA_IO_PU_PD(114), - PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117), - PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120), - PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123), - PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126), - PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129), - PORT_DATA_IO_PU(130), - PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133), - PORT_DATA_IO_PU(134), - PORT_DATA_O(135), PORT_DATA_O(136), - PORT_DATA_I_PU_PD(137), - PORT_DATA_IO(138), - PORT_DATA_IO_PU_PD(139), - PORT_DATA_IO(140), PORT_DATA_IO(141), - PORT_DATA_I_PU(142), - PORT_DATA_O(143), PORT_DATA_O(144), - PORT_DATA_I_PU(145), - - /* 49-4 (GPIO) */ - PORT_DATA_O(146), - PORT_DATA_I_PU_PD(147), - PORT_DATA_I_PD(148), PORT_DATA_I_PD(149), - PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152), - PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155), - PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158), - PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161), - PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164), - PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166), - PORT_DATA_IO_PU_PD(167), - PORT_DATA_O(168), - PORT_DATA_I_PD(169), PORT_DATA_I_PD(170), - PORT_DATA_O(171), - PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173), - PORT_DATA_O(174), - PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177), - PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180), - PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183), - PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186), - PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189), - PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192), - PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195), - PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198), - PORT_DATA_O(199), - PORT_DATA_IO_PD(200), - - /* 49-5 (GPIO) */ - PORT_DATA_O(201), - PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203), - PORT_DATA_I(204), - PORT_DATA_O(205), - PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208), - PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), - PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214), - PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216), - PORT_DATA_O(217), - PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219), - PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222), - PORT_DATA_I_PD(223), - PORT_DATA_I_PU_PD(224), - PORT_DATA_O(225), - PORT_DATA_IO_PD(226), - PORT_DATA_IO_PU_PD(227), - PORT_DATA_I_PD(228), - PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230), - PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232), - PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234), - PORT_DATA_I_PU_PD(235), - PORT_DATA_O(236), - PORT_DATA_I_PD(237), - PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239), - PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241), - PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243), - PORT_DATA_O(244), - PORT_DATA_IO_PU_PD(245), - PORT_DATA_O(246), - PORT_DATA_I_PD(247), - PORT_DATA_IO_PU_PD(248), - PORT_DATA_I_PU_PD(249), - PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251), - PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253), - PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255), - PORT_DATA_IO_PU_PD(256), - - /* 49-6 (GPIO) */ - PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258), - PORT_DATA_IO_PD(259), - PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262), - PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264), - PORT_DATA_O(265), - PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268), - PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270), - PORT_DATA_O(271), - PORT_DATA_I_PD(272), - - /* Special Pull-up / Pull-down Functions */ - PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1, - PORT48_FN2, PORT48_IN_PU), - PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1, - PORT49_FN2, PORT49_IN_PU), - PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1, - PORT50_FN2, PORT50_IN_PU), - PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1, - PORT55_FN2, PORT55_IN_PU), - PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1, - PORT56_FN2, PORT56_IN_PU), - PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1, - PORT57_FN2, PORT57_IN_PU), - PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1, - PORT58_FN2, PORT58_IN_PU), - - /* 49-1 (FN) */ - PINMUX_DATA(VBUS0_MARK, PORT0_FN1), - PINMUX_DATA(CPORT0_MARK, PORT1_FN1), - PINMUX_DATA(CPORT1_MARK, PORT2_FN1), - PINMUX_DATA(CPORT2_MARK, PORT3_FN1), - PINMUX_DATA(CPORT3_MARK, PORT4_FN1), - PINMUX_DATA(CPORT4_MARK, PORT5_FN1), - PINMUX_DATA(CPORT5_MARK, PORT6_FN1), - PINMUX_DATA(CPORT6_MARK, PORT7_FN1), - PINMUX_DATA(CPORT7_MARK, PORT8_FN1), - PINMUX_DATA(CPORT8_MARK, PORT9_FN1), - PINMUX_DATA(CPORT9_MARK, PORT10_FN1), - PINMUX_DATA(CPORT10_MARK, PORT11_FN1), - PINMUX_DATA(CPORT11_MARK, PORT12_FN1), - PINMUX_DATA(SIN2_MARK, PORT12_FN2), - PINMUX_DATA(CPORT12_MARK, PORT13_FN1), - PINMUX_DATA(XCTS2_MARK, PORT13_FN2), - PINMUX_DATA(CPORT13_MARK, PORT14_FN1), - PINMUX_DATA(RFSPO4_MARK, PORT14_FN2), - PINMUX_DATA(CPORT14_MARK, PORT15_FN1), - PINMUX_DATA(RFSPO5_MARK, PORT15_FN2), - PINMUX_DATA(CPORT15_MARK, PORT16_FN1), - PINMUX_DATA(CPORT16_MARK, PORT17_FN1), - PINMUX_DATA(CPORT17_MARK, PORT18_FN1), - PINMUX_DATA(SOUT2_MARK, PORT18_FN2), - PINMUX_DATA(CPORT18_MARK, PORT19_FN1), - PINMUX_DATA(XRTS2_MARK, PORT19_FN1), - PINMUX_DATA(CPORT19_MARK, PORT20_FN1), - PINMUX_DATA(CPORT20_MARK, PORT21_FN1), - PINMUX_DATA(RFSPO6_MARK, PORT21_FN2), - PINMUX_DATA(CPORT21_MARK, PORT22_FN1), - PINMUX_DATA(STATUS0_MARK, PORT22_FN2), - PINMUX_DATA(CPORT22_MARK, PORT23_FN1), - PINMUX_DATA(STATUS1_MARK, PORT23_FN2), - PINMUX_DATA(CPORT23_MARK, PORT24_FN1), - PINMUX_DATA(STATUS2_MARK, PORT24_FN2), - PINMUX_DATA(RFSPO7_MARK, PORT24_FN3), - PINMUX_DATA(MPORT0_MARK, PORT25_FN1), - PINMUX_DATA(MPORT1_MARK, PORT26_FN1), - PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1), - PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1), - PINMUX_DATA(XMAINPS_MARK, PORT29_FN1), - PINMUX_DATA(XDIVPS_MARK, PORT30_FN1), - PINMUX_DATA(XIDRST_MARK, PORT31_FN1), - PINMUX_DATA(IDCLK_MARK, PORT32_FN1), - PINMUX_DATA(IDIO_MARK, PORT33_FN1), - PINMUX_DATA(SOUT1_MARK, PORT34_FN1), - PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2), - PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3), - PINMUX_DATA(SIN1_MARK, PORT35_FN1), - PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2), - PINMUX_DATA(XWUP_MARK, PORT35_FN3), - PINMUX_DATA(XRTS1_MARK, PORT36_FN1), - PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2), - PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3), - PINMUX_DATA(XCTS1_MARK, PORT37_FN1), - PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2), - - /* 49-2 (FN) */ - PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1), - PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2), - PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3), - PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1), - PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2), - PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3), - PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1), - PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3), - PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1), - PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2), - PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3), - PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1), - PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2), - PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1), - PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2), - PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1), - PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2), - PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1), - PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2), - PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1), - PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2), - PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1), - PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2), - PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1), - PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2), - PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1), - PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2), - PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1), - PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2), - PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1), - PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2), - PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1), - PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2), - PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1), - PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2), - PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1), - PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2), - PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1), - PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2), - PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1), - PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2), - PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1), - PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2), - PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1), - PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2), - PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1), - PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2), - PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1), - PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2), - PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1), - PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1), - PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1), - PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1), - PINMUX_DATA(XTALB1L_MARK, PORT65_FN1), - PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1), - PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2), - PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1), - PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2), - PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1), - PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2), - PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1), - PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2), - PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1), - PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2), - PINMUX_DATA(GPS_IM_MARK, PORT71_FN1), - PINMUX_DATA(GPS_IS_MARK, PORT72_FN1), - PINMUX_DATA(GPS_QM_MARK, PORT73_FN1), - PINMUX_DATA(GPS_QS_MARK, PORT74_FN1), - PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1), - PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3), - PINMUX_DATA(SIUCKB_MARK, PORT76_FN1), - PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3), - PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1), - PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2), - PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3), - PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1), - PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2), - PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3), - PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1), - PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2), - PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3), - PINMUX_DATA(SIUBILR_MARK, PORT80_FN1), - PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3), - PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1), - PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3), - PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1), - PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3), - PINMUX_DATA(NMI_MARK, PORT83_FN1), - PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3), - PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1), - PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3), - PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3), - PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3), - PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1), - PINMUX_DATA(PWEN_MARK, PORT88_FN1), - PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2), - PINMUX_DATA(OVCN_MARK, PORT89_FN1), - PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2), - PINMUX_DATA(OVCN2_MARK, PORT90_FN1), - PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2), - - /* 49-3 (FN) */ - PINMUX_DATA(RFSPO1_MARK, PORT91_FN1), - PINMUX_DATA(RFSPO2_MARK, PORT92_FN1), - PINMUX_DATA(RFSPO3_MARK, PORT93_FN1), - PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2), - PINMUX_DATA(USBTERM_MARK, PORT94_FN1), - PINMUX_DATA(EXTLP_MARK, PORT94_FN2), - PINMUX_DATA(IDIN_MARK, PORT95_FN1), - PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1), - PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2), - PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1), - PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2), - PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1), - PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1), - PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1), - PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2), - PINMUX_DATA(A0_EA0_MARK, PORT101_FN1), - PINMUX_DATA(BS_MARK, PORT101_FN2), - PINMUX_DATA(A14_EA14_MARK, PORT102_FN1), - PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2), - PINMUX_DATA(A15_EA15_MARK, PORT103_FN1), - PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2), - PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3), - PINMUX_DATA(A16_EA16_MARK, PORT104_FN1), - PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2), - PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3), - PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4), - PINMUX_DATA(A17_EA17_MARK, PORT105_FN1), - PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2), - PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3), - PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4), - PINMUX_DATA(A18_EA18_MARK, PORT106_FN1), - PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2), - PINMUX_DATA(DV_DL0_MARK, PORT106_FN3), - PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4), - PINMUX_DATA(A19_EA19_MARK, PORT107_FN1), - PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2), - PINMUX_DATA(DV_DL1_MARK, PORT107_FN3), - PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4), - PINMUX_DATA(A20_EA20_MARK, PORT108_FN1), - PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2), - PINMUX_DATA(DV_DL2_MARK, PORT108_FN3), - PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4), - PINMUX_DATA(A21_EA21_MARK, PORT109_FN1), - PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2), - PINMUX_DATA(DV_DL3_MARK, PORT109_FN3), - PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4), - PINMUX_DATA(A22_EA22_MARK, PORT110_FN1), - PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2), - PINMUX_DATA(DV_DL4_MARK, PORT110_FN3), - PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4), - PINMUX_DATA(A23_EA23_MARK, PORT111_FN1), - PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2), - PINMUX_DATA(DV_DL5_MARK, PORT111_FN3), - PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4), - PINMUX_DATA(A24_EA24_MARK, PORT112_FN1), - PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2), - PINMUX_DATA(DV_DL6_MARK, PORT112_FN3), - PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4), - PINMUX_DATA(A25_EA25_MARK, PORT113_FN1), - PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2), - PINMUX_DATA(DV_DL7_MARK, PORT113_FN3), - PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4), - PINMUX_DATA(A26_MARK, PORT114_FN1), - PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2), - PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3), - PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1), - PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1), - PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1), - PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1), - PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1), - PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1), - PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1), - PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1), - PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1), - PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1), - PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1), - PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1), - PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1), - PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1), - PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1), - PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1), - PINMUX_DATA(CS4_MARK, PORT131_FN1), - PINMUX_DATA(CS5A_MARK, PORT132_FN1), - PINMUX_DATA(CS5B_MARK, PORT133_FN1), - PINMUX_DATA(FCE1_MARK, PORT133_FN2), - PINMUX_DATA(CS6B_MARK, PORT134_FN1), - PINMUX_DATA(XCS2_MARK, PORT134_FN2), - PINMUX_DATA(FCE0_MARK, PORT135_FN1), - PINMUX_DATA(CS6A_MARK, PORT136_FN1), - PINMUX_DATA(DACK0_MARK, PORT136_FN2), - PINMUX_DATA(WAIT_MARK, PORT137_FN1), - PINMUX_DATA(DREQ0_MARK, PORT137_FN2), - PINMUX_DATA(RD_XRD_MARK, PORT138_FN1), - PINMUX_DATA(A27_MARK, PORT139_FN1), - PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2), - PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1), - PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1), - PINMUX_DATA(FRB_MARK, PORT142_FN1), - PINMUX_DATA(CKO_MARK, PORT143_FN1), - PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1), - PINMUX_DATA(NBRST_MARK, PORT145_FN1), - - /* 49-4 (FN) */ - PINMUX_DATA(RFSPO0_MARK, PORT146_FN1), - PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2), - PINMUX_DATA(TSTMD_MARK, PORT147_FN1), - PINMUX_DATA(VIO_VD_MARK, PORT148_FN1), - PINMUX_DATA(VIO_HD_MARK, PORT149_FN1), - PINMUX_DATA(VIO_D0_MARK, PORT150_FN1), - PINMUX_DATA(VIO_D1_MARK, PORT151_FN1), - PINMUX_DATA(VIO_D2_MARK, PORT152_FN1), - PINMUX_DATA(VIO_D3_MARK, PORT153_FN1), - PINMUX_DATA(VIO_D4_MARK, PORT154_FN1), - PINMUX_DATA(VIO_D5_MARK, PORT155_FN1), - PINMUX_DATA(VIO_D6_MARK, PORT156_FN1), - PINMUX_DATA(VIO_D7_MARK, PORT157_FN1), - PINMUX_DATA(VIO_D8_MARK, PORT158_FN1), - PINMUX_DATA(VIO_D9_MARK, PORT159_FN1), - PINMUX_DATA(VIO_D10_MARK, PORT160_FN1), - PINMUX_DATA(VIO_D11_MARK, PORT161_FN1), - PINMUX_DATA(VIO_D12_MARK, PORT162_FN1), - PINMUX_DATA(VIO_D13_MARK, PORT163_FN1), - PINMUX_DATA(VIO_D14_MARK, PORT164_FN1), - PINMUX_DATA(VIO_D15_MARK, PORT165_FN1), - PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1), - PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1), - PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1), - PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2), - PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2), - PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1), - PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2), - PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3), - PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1), - PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2), - PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3), - PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1), - PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2), - PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3), - PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1), - PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2), - PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3), - PINMUX_DATA(LCDD0_MARK, PORT175_FN1), - PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2), - PINMUX_DATA(DV_D0_MARK, PORT175_FN3), - PINMUX_DATA(SIUCKA_MARK, PORT175_FN4), - PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5), - PINMUX_DATA(LCDD1_MARK, PORT176_FN1), - PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2), - PINMUX_DATA(DV_D1_MARK, PORT176_FN3), - PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4), - PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5), - PINMUX_DATA(LCDD2_MARK, PORT177_FN1), - PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2), - PINMUX_DATA(DV_D2_MARK, PORT177_FN3), - PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4), - PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5), - PINMUX_DATA(LCDD3_MARK, PORT178_FN1), - PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2), - PINMUX_DATA(DV_D3_MARK, PORT178_FN3), - PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4), - PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5), - PINMUX_DATA(LCDD4_MARK, PORT179_FN1), - PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2), - PINMUX_DATA(DV_D4_MARK, PORT179_FN3), - PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4), - PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5), - PINMUX_DATA(LCDD5_MARK, PORT180_FN1), - PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2), - PINMUX_DATA(DV_D5_MARK, PORT180_FN3), - PINMUX_DATA(SIUAILR_MARK, PORT180_FN4), - PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5), - PINMUX_DATA(LCDD6_MARK, PORT181_FN1), - PINMUX_DATA(DV_D6_MARK, PORT181_FN3), - PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4), - PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5), - PINMUX_DATA(XWR2_MARK, PORT181_FN7), - PINMUX_DATA(LCDD7_MARK, PORT182_FN1), - PINMUX_DATA(DV_D7_MARK, PORT182_FN3), - PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4), - PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5), - PINMUX_DATA(XWR3_MARK, PORT182_FN7), - PINMUX_DATA(LCDD8_MARK, PORT183_FN1), - PINMUX_DATA(DV_D8_MARK, PORT183_FN3), - PINMUX_DATA(D16_MARK, PORT183_FN6), - PINMUX_DATA(ED16_MARK, PORT183_FN7), - PINMUX_DATA(LCDD9_MARK, PORT184_FN1), - PINMUX_DATA(DV_D9_MARK, PORT184_FN3), - PINMUX_DATA(D17_MARK, PORT184_FN6), - PINMUX_DATA(ED17_MARK, PORT184_FN7), - PINMUX_DATA(LCDD10_MARK, PORT185_FN1), - PINMUX_DATA(DV_D10_MARK, PORT185_FN3), - PINMUX_DATA(D18_MARK, PORT185_FN6), - PINMUX_DATA(ED18_MARK, PORT185_FN7), - PINMUX_DATA(LCDD11_MARK, PORT186_FN1), - PINMUX_DATA(DV_D11_MARK, PORT186_FN3), - PINMUX_DATA(D19_MARK, PORT186_FN6), - PINMUX_DATA(ED19_MARK, PORT186_FN7), - PINMUX_DATA(LCDD12_MARK, PORT187_FN1), - PINMUX_DATA(DV_D12_MARK, PORT187_FN3), - PINMUX_DATA(D20_MARK, PORT187_FN6), - PINMUX_DATA(ED20_MARK, PORT187_FN7), - PINMUX_DATA(LCDD13_MARK, PORT188_FN1), - PINMUX_DATA(DV_D13_MARK, PORT188_FN3), - PINMUX_DATA(D21_MARK, PORT188_FN6), - PINMUX_DATA(ED21_MARK, PORT188_FN7), - PINMUX_DATA(LCDD14_MARK, PORT189_FN1), - PINMUX_DATA(DV_D14_MARK, PORT189_FN3), - PINMUX_DATA(D22_MARK, PORT189_FN6), - PINMUX_DATA(ED22_MARK, PORT189_FN7), - PINMUX_DATA(LCDD15_MARK, PORT190_FN1), - PINMUX_DATA(DV_D15_MARK, PORT190_FN3), - PINMUX_DATA(D23_MARK, PORT190_FN6), - PINMUX_DATA(ED23_MARK, PORT190_FN7), - PINMUX_DATA(LCDD16_MARK, PORT191_FN1), - PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3), - PINMUX_DATA(D24_MARK, PORT191_FN6), - PINMUX_DATA(ED24_MARK, PORT191_FN7), - PINMUX_DATA(LCDD17_MARK, PORT192_FN1), - PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3), - PINMUX_DATA(D25_MARK, PORT192_FN6), - PINMUX_DATA(ED25_MARK, PORT192_FN7), - PINMUX_DATA(LCDD18_MARK, PORT193_FN1), - PINMUX_DATA(DREQ2_MARK, PORT193_FN2), - PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5), - PINMUX_DATA(D26_MARK, PORT193_FN6), - PINMUX_DATA(ED26_MARK, PORT193_FN7), - PINMUX_DATA(LCDD19_MARK, PORT194_FN1), - PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5), - PINMUX_DATA(D27_MARK, PORT194_FN6), - PINMUX_DATA(ED27_MARK, PORT194_FN7), - PINMUX_DATA(LCDD20_MARK, PORT195_FN1), - PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2), - PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5), - PINMUX_DATA(D28_MARK, PORT195_FN6), - PINMUX_DATA(ED28_MARK, PORT195_FN7), - PINMUX_DATA(LCDD21_MARK, PORT196_FN1), - PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2), - PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5), - PINMUX_DATA(D29_MARK, PORT196_FN6), - PINMUX_DATA(ED29_MARK, PORT196_FN7), - PINMUX_DATA(LCDD22_MARK, PORT197_FN1), - PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2), - PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5), - PINMUX_DATA(D30_MARK, PORT197_FN6), - PINMUX_DATA(ED30_MARK, PORT197_FN7), - PINMUX_DATA(LCDD23_MARK, PORT198_FN1), - PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2), - PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5), - PINMUX_DATA(D31_MARK, PORT198_FN6), - PINMUX_DATA(ED31_MARK, PORT198_FN7), - PINMUX_DATA(LCDDCK_MARK, PORT199_FN1), - PINMUX_DATA(LCDWR_MARK, PORT199_FN2), - PINMUX_DATA(DV_CKO_MARK, PORT199_FN3), - PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4), - PINMUX_DATA(LCDRD_MARK, PORT200_FN1), - PINMUX_DATA(DACK2_MARK, PORT200_FN2), - PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5), - - /* 49-5 (FN) */ - PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1), - PINMUX_DATA(LCDCS_MARK, PORT201_FN2), - PINMUX_DATA(LCDCS2_MARK, PORT201_FN3), - PINMUX_DATA(DACK3_MARK, PORT201_FN4), - PINMUX_DATA(LCDDISP_MARK, PORT202_FN1), - PINMUX_DATA(LCDRS_MARK, PORT202_FN2), - PINMUX_DATA(DREQ3_MARK, PORT202_FN4), - PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5), - PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1), - PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2), - PINMUX_DATA(DV_CKI_MARK, PORT203_FN3), - PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1), - PINMUX_DATA(DREQ1_MARK, PORT204_FN3), - PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5), - PINMUX_DATA(LCDDON_MARK, PORT205_FN1), - PINMUX_DATA(LCDDON2_MARK, PORT205_FN2), - PINMUX_DATA(DACK1_MARK, PORT205_FN3), - PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5), - PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1), - PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1), - PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1), - PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1), - PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1), - PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1), - PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1), - PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1), - PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1), - PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1), - PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1), - PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1), - PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2), - PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3), - PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2), - PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3), - PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2), - PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3), - PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2), - PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2), - PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1), - PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2), - PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3), - PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1), - PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2), - PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3), - PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1), - PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2), - PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1), - PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2), - PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3), - PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1), - PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2), - PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1), - PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3), - PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1), - PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1), - PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1), - PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2), - PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1), - PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1), - PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2), - PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2), - PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1), - PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3), - PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4), - PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3), - PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4), - PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3), - PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4), - PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5), - PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3), - PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5), - PINMUX_DATA(M13_BSW_MARK, PORT243_FN2), - PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5), - PINMUX_DATA(M14_GSW_MARK, PORT244_FN2), - PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5), - PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1), - PINMUX_DATA(M15_RSW_MARK, PORT245_FN2), - PINMUX_DATA(SOUT3_MARK, PORT246_FN1), - PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2), - PINMUX_DATA(SIN3_MARK, PORT247_FN1), - PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2), - PINMUX_DATA(XRTS3_MARK, PORT248_FN1), - PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2), - PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5), - PINMUX_DATA(XCTS3_MARK, PORT249_FN1), - PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2), - PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5), - PINMUX_DATA(DINT_MARK, PORT250_FN1), - PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2), - PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4), - PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1), - PINMUX_DATA(TCK2_MARK, PORT251_FN2), - PINMUX_DATA(SDHICD0_MARK, PORT252_FN1), - PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1), - PINMUX_DATA(TMS2_MARK, PORT253_FN2), - PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1), - PINMUX_DATA(TDO2_MARK, PORT254_FN2), - PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1), - PINMUX_DATA(TDI2_MARK, PORT255_FN2), - PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1), - PINMUX_DATA(RTCK2_MARK, PORT256_FN2), - - /* 49-6 (FN) */ - PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1), - PINMUX_DATA(TRST2_MARK, PORT257_FN2), - PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1), - PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2), - PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1), - PINMUX_DATA(TCK3_MARK, PORT259_FN4), - PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1), - PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2), - PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3), - PINMUX_DATA(TMS3_MARK, PORT260_FN4), - PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1), - PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2), - PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3), - PINMUX_DATA(TDO3_MARK, PORT261_FN4), - PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1), - PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2), - PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3), - PINMUX_DATA(TDI3_MARK, PORT262_FN4), - PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1), - PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2), - PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3), - PINMUX_DATA(RTCK3_MARK, PORT263_FN4), - PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1), - PINMUX_DATA(TRST3_MARK, PORT264_FN4), - PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1), - PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2), - PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1), - PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2), - PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1), - PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2), - PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1), - PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2), - PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1), - PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2), - PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1), - PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1), - PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - /* 49-1 -> 49-6 (GPIO) */ - GPIO_PORT_ALL(), - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU), - GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU), - GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU), - GPIO_FN(PORT58_KEYIN6_PU), - - /* 49-1 (FN) */ - GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2), - GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6), - GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10), - GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2), - GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5), - GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2), - GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20), - GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22), - GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7), - GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2), - GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK), - GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), - GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP), - GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK), - GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS), - - /* 49-2 (FN) */ - GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0), - GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1), - GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK), - GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0), - GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1), - GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2), - GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3), - GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4), - GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5), - GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0), - GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1), - GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2), - GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC), - GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK), - GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD), - GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD), - GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3), - GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4), - GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5), - GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6), - GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1), - GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2), - GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A), - GPIO_FN(XTALB1L), - GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS), - GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK), - GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD), - GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD), - GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS), - GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS), - GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0), - GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1), - GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2), - GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3), - GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0), - GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1), - GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2), - GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3), - GPIO_FN(NMI), GPIO_FN(TPU4TO0), - GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3), - GPIO_FN(IRQ_TMPB), - GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1), - GPIO_FN(OVCN), GPIO_FN(MFG1_IN1), - GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2), - - /* 49-3 (FN) */ - GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3), - GPIO_FN(PORT93_VIO_CKO2), - GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN), - GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1), - GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2), - GPIO_FN(SCIFA5_RXD), - GPIO_FN(SCIFA5_TXD), - GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1), - GPIO_FN(A0_EA0), GPIO_FN(BS), - GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0), - GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL), - GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2), - GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1), - GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3), - GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC), - GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4), - GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK), - GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5), - GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD), - GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0), - GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK), - GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1), - GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC), - GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2), - GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0), - GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3), - GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1), - GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4), - GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD), - GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5), - GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2), - GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL), - GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2), - GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5), - GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8), - GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11), - GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13), - GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15), - GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1), - GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A), - GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD), - GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE), - GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO), - GPIO_FN(NBRSTOUT), GPIO_FN(NBRST), - - /* 49-4 (FN) */ - GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD), - GPIO_FN(VIO_VD), GPIO_FN(VIO_HD), - GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2), - GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5), - GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8), - GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11), - GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14), - GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD), - GPIO_FN(VIO_CKO), - GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2), - GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0), - GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1), - GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2), - GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3), - GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0), - GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2), - GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1), - GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2), - GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1), - GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3), - GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1), - GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4), - GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2), - GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5), - GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2), - GPIO_FN(LCDD6), GPIO_FN(DV_D6), - GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2), - GPIO_FN(LCDD7), GPIO_FN(DV_D7), - GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3), - GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16), - GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17), - GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18), - GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19), - GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20), - GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21), - GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22), - GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23), - GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24), - GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25), - GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK), - GPIO_FN(D26), GPIO_FN(ED26), - GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC), - GPIO_FN(D27), GPIO_FN(ED27), - GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0), - GPIO_FN(D28), GPIO_FN(ED28), - GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1), - GPIO_FN(D29), GPIO_FN(ED29), - GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1), - GPIO_FN(D30), GPIO_FN(ED30), - GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2), - GPIO_FN(D31), GPIO_FN(ED31), - GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD), - GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC), - - /* 49-5 (FN) */ - GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3), - GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK), - GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI), - GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD), - GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD), - GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3), - GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7), - GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR), - GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR), - GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0), - GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1), - GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON), - GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS), - GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD), - GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2), - GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2), - GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD), - GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2), - GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), - GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3), - GPIO_FN(MSIOF1_SS2), - GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT), - GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL), - GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3), - GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3), - GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1), - GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK), - GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC), - GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD), - GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW), - GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), - GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), - GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2), - GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD), - GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3), - GPIO_FN(SDHICLK0), GPIO_FN(TCK2), - GPIO_FN(SDHICD0), - GPIO_FN(SDHID0_0), GPIO_FN(TMS2), - GPIO_FN(SDHID0_1), GPIO_FN(TDO2), - GPIO_FN(SDHID0_2), GPIO_FN(TDI2), - GPIO_FN(SDHID0_3), GPIO_FN(RTCK2), - - /* 49-6 (FN) */ - GPIO_FN(SDHICMD0), GPIO_FN(TRST2), - GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2), - GPIO_FN(SDHICLK1), GPIO_FN(TCK3), - GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), - GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3), - GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2), - GPIO_FN(TS_SDAT2), GPIO_FN(TDO3), - GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), - GPIO_FN(TS_SDEN2), GPIO_FN(TDI3), - GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), - GPIO_FN(TS_SCK2), GPIO_FN(RTCK3), - GPIO_FN(SDHICMD1), GPIO_FN(TRST3), - GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK), - GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD), - GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS), - GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD), - GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS), - GPIO_FN(SDHICMD2), - GPIO_FN(RESETOUTS), - GPIO_FN(DIVLOCK), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - PORTCR(0, 0xe6050000), /* PORT0CR */ - PORTCR(1, 0xe6050001), /* PORT1CR */ - PORTCR(2, 0xe6050002), /* PORT2CR */ - PORTCR(3, 0xe6050003), /* PORT3CR */ - PORTCR(4, 0xe6050004), /* PORT4CR */ - PORTCR(5, 0xe6050005), /* PORT5CR */ - PORTCR(6, 0xe6050006), /* PORT6CR */ - PORTCR(7, 0xe6050007), /* PORT7CR */ - PORTCR(8, 0xe6050008), /* PORT8CR */ - PORTCR(9, 0xe6050009), /* PORT9CR */ - - PORTCR(10, 0xe605000a), /* PORT10CR */ - PORTCR(11, 0xe605000b), /* PORT11CR */ - PORTCR(12, 0xe605000c), /* PORT12CR */ - PORTCR(13, 0xe605000d), /* PORT13CR */ - PORTCR(14, 0xe605000e), /* PORT14CR */ - PORTCR(15, 0xe605000f), /* PORT15CR */ - PORTCR(16, 0xe6050010), /* PORT16CR */ - PORTCR(17, 0xe6050011), /* PORT17CR */ - PORTCR(18, 0xe6050012), /* PORT18CR */ - PORTCR(19, 0xe6050013), /* PORT19CR */ - - PORTCR(20, 0xe6050014), /* PORT20CR */ - PORTCR(21, 0xe6050015), /* PORT21CR */ - PORTCR(22, 0xe6050016), /* PORT22CR */ - PORTCR(23, 0xe6050017), /* PORT23CR */ - PORTCR(24, 0xe6050018), /* PORT24CR */ - PORTCR(25, 0xe6050019), /* PORT25CR */ - PORTCR(26, 0xe605001a), /* PORT26CR */ - PORTCR(27, 0xe605001b), /* PORT27CR */ - PORTCR(28, 0xe605001c), /* PORT28CR */ - PORTCR(29, 0xe605001d), /* PORT29CR */ - - PORTCR(30, 0xe605001e), /* PORT30CR */ - PORTCR(31, 0xe605001f), /* PORT31CR */ - PORTCR(32, 0xe6050020), /* PORT32CR */ - PORTCR(33, 0xe6050021), /* PORT33CR */ - PORTCR(34, 0xe6050022), /* PORT34CR */ - PORTCR(35, 0xe6050023), /* PORT35CR */ - PORTCR(36, 0xe6050024), /* PORT36CR */ - PORTCR(37, 0xe6050025), /* PORT37CR */ - PORTCR(38, 0xe6050026), /* PORT38CR */ - PORTCR(39, 0xe6050027), /* PORT39CR */ - - PORTCR(40, 0xe6050028), /* PORT40CR */ - PORTCR(41, 0xe6050029), /* PORT41CR */ - PORTCR(42, 0xe605002a), /* PORT42CR */ - PORTCR(43, 0xe605002b), /* PORT43CR */ - PORTCR(44, 0xe605002c), /* PORT44CR */ - PORTCR(45, 0xe605002d), /* PORT45CR */ - PORTCR(46, 0xe605002e), /* PORT46CR */ - PORTCR(47, 0xe605002f), /* PORT47CR */ - PORTCR(48, 0xe6050030), /* PORT48CR */ - PORTCR(49, 0xe6050031), /* PORT49CR */ - - PORTCR(50, 0xe6050032), /* PORT50CR */ - PORTCR(51, 0xe6050033), /* PORT51CR */ - PORTCR(52, 0xe6050034), /* PORT52CR */ - PORTCR(53, 0xe6050035), /* PORT53CR */ - PORTCR(54, 0xe6050036), /* PORT54CR */ - PORTCR(55, 0xe6050037), /* PORT55CR */ - PORTCR(56, 0xe6050038), /* PORT56CR */ - PORTCR(57, 0xe6050039), /* PORT57CR */ - PORTCR(58, 0xe605003a), /* PORT58CR */ - PORTCR(59, 0xe605003b), /* PORT59CR */ - - PORTCR(60, 0xe605003c), /* PORT60CR */ - PORTCR(61, 0xe605003d), /* PORT61CR */ - PORTCR(62, 0xe605003e), /* PORT62CR */ - PORTCR(63, 0xe605003f), /* PORT63CR */ - PORTCR(64, 0xe6050040), /* PORT64CR */ - PORTCR(65, 0xe6050041), /* PORT65CR */ - PORTCR(66, 0xe6050042), /* PORT66CR */ - PORTCR(67, 0xe6050043), /* PORT67CR */ - PORTCR(68, 0xe6050044), /* PORT68CR */ - PORTCR(69, 0xe6050045), /* PORT69CR */ - - PORTCR(70, 0xe6050046), /* PORT70CR */ - PORTCR(71, 0xe6050047), /* PORT71CR */ - PORTCR(72, 0xe6050048), /* PORT72CR */ - PORTCR(73, 0xe6050049), /* PORT73CR */ - PORTCR(74, 0xe605004a), /* PORT74CR */ - PORTCR(75, 0xe605004b), /* PORT75CR */ - PORTCR(76, 0xe605004c), /* PORT76CR */ - PORTCR(77, 0xe605004d), /* PORT77CR */ - PORTCR(78, 0xe605004e), /* PORT78CR */ - PORTCR(79, 0xe605004f), /* PORT79CR */ - - PORTCR(80, 0xe6050050), /* PORT80CR */ - PORTCR(81, 0xe6050051), /* PORT81CR */ - PORTCR(82, 0xe6050052), /* PORT82CR */ - PORTCR(83, 0xe6050053), /* PORT83CR */ - PORTCR(84, 0xe6050054), /* PORT84CR */ - PORTCR(85, 0xe6050055), /* PORT85CR */ - PORTCR(86, 0xe6050056), /* PORT86CR */ - PORTCR(87, 0xe6050057), /* PORT87CR */ - PORTCR(88, 0xe6051058), /* PORT88CR */ - PORTCR(89, 0xe6051059), /* PORT89CR */ - - PORTCR(90, 0xe605105a), /* PORT90CR */ - PORTCR(91, 0xe605105b), /* PORT91CR */ - PORTCR(92, 0xe605105c), /* PORT92CR */ - PORTCR(93, 0xe605105d), /* PORT93CR */ - PORTCR(94, 0xe605105e), /* PORT94CR */ - PORTCR(95, 0xe605105f), /* PORT95CR */ - PORTCR(96, 0xe6051060), /* PORT96CR */ - PORTCR(97, 0xe6051061), /* PORT97CR */ - PORTCR(98, 0xe6051062), /* PORT98CR */ - PORTCR(99, 0xe6051063), /* PORT99CR */ - - PORTCR(100, 0xe6051064), /* PORT100CR */ - PORTCR(101, 0xe6051065), /* PORT101CR */ - PORTCR(102, 0xe6051066), /* PORT102CR */ - PORTCR(103, 0xe6051067), /* PORT103CR */ - PORTCR(104, 0xe6051068), /* PORT104CR */ - PORTCR(105, 0xe6051069), /* PORT105CR */ - PORTCR(106, 0xe605106a), /* PORT106CR */ - PORTCR(107, 0xe605106b), /* PORT107CR */ - PORTCR(108, 0xe605106c), /* PORT108CR */ - PORTCR(109, 0xe605106d), /* PORT109CR */ - - PORTCR(110, 0xe605106e), /* PORT110CR */ - PORTCR(111, 0xe605106f), /* PORT111CR */ - PORTCR(112, 0xe6051070), /* PORT112CR */ - PORTCR(113, 0xe6051071), /* PORT113CR */ - PORTCR(114, 0xe6051072), /* PORT114CR */ - PORTCR(115, 0xe6051073), /* PORT115CR */ - PORTCR(116, 0xe6051074), /* PORT116CR */ - PORTCR(117, 0xe6051075), /* PORT117CR */ - PORTCR(118, 0xe6051076), /* PORT118CR */ - PORTCR(119, 0xe6051077), /* PORT119CR */ - - PORTCR(120, 0xe6051078), /* PORT120CR */ - PORTCR(121, 0xe6051079), /* PORT121CR */ - PORTCR(122, 0xe605107a), /* PORT122CR */ - PORTCR(123, 0xe605107b), /* PORT123CR */ - PORTCR(124, 0xe605107c), /* PORT124CR */ - PORTCR(125, 0xe605107d), /* PORT125CR */ - PORTCR(126, 0xe605107e), /* PORT126CR */ - PORTCR(127, 0xe605107f), /* PORT127CR */ - PORTCR(128, 0xe6051080), /* PORT128CR */ - PORTCR(129, 0xe6051081), /* PORT129CR */ - - PORTCR(130, 0xe6051082), /* PORT130CR */ - PORTCR(131, 0xe6051083), /* PORT131CR */ - PORTCR(132, 0xe6051084), /* PORT132CR */ - PORTCR(133, 0xe6051085), /* PORT133CR */ - PORTCR(134, 0xe6051086), /* PORT134CR */ - PORTCR(135, 0xe6051087), /* PORT135CR */ - PORTCR(136, 0xe6051088), /* PORT136CR */ - PORTCR(137, 0xe6051089), /* PORT137CR */ - PORTCR(138, 0xe605108a), /* PORT138CR */ - PORTCR(139, 0xe605108b), /* PORT139CR */ - - PORTCR(140, 0xe605108c), /* PORT140CR */ - PORTCR(141, 0xe605108d), /* PORT141CR */ - PORTCR(142, 0xe605108e), /* PORT142CR */ - PORTCR(143, 0xe605108f), /* PORT143CR */ - PORTCR(144, 0xe6051090), /* PORT144CR */ - PORTCR(145, 0xe6051091), /* PORT145CR */ - PORTCR(146, 0xe6051092), /* PORT146CR */ - PORTCR(147, 0xe6051093), /* PORT147CR */ - PORTCR(148, 0xe6051094), /* PORT148CR */ - PORTCR(149, 0xe6051095), /* PORT149CR */ - - PORTCR(150, 0xe6051096), /* PORT150CR */ - PORTCR(151, 0xe6051097), /* PORT151CR */ - PORTCR(152, 0xe6051098), /* PORT152CR */ - PORTCR(153, 0xe6051099), /* PORT153CR */ - PORTCR(154, 0xe605109a), /* PORT154CR */ - PORTCR(155, 0xe605109b), /* PORT155CR */ - PORTCR(156, 0xe605109c), /* PORT156CR */ - PORTCR(157, 0xe605109d), /* PORT157CR */ - PORTCR(158, 0xe605109e), /* PORT158CR */ - PORTCR(159, 0xe605109f), /* PORT159CR */ - - PORTCR(160, 0xe60510a0), /* PORT160CR */ - PORTCR(161, 0xe60510a1), /* PORT161CR */ - PORTCR(162, 0xe60510a2), /* PORT162CR */ - PORTCR(163, 0xe60510a3), /* PORT163CR */ - PORTCR(164, 0xe60510a4), /* PORT164CR */ - PORTCR(165, 0xe60510a5), /* PORT165CR */ - PORTCR(166, 0xe60510a6), /* PORT166CR */ - PORTCR(167, 0xe60510a7), /* PORT167CR */ - PORTCR(168, 0xe60510a8), /* PORT168CR */ - PORTCR(169, 0xe60510a9), /* PORT169CR */ - - PORTCR(170, 0xe60510aa), /* PORT170CR */ - PORTCR(171, 0xe60510ab), /* PORT171CR */ - PORTCR(172, 0xe60510ac), /* PORT172CR */ - PORTCR(173, 0xe60510ad), /* PORT173CR */ - PORTCR(174, 0xe60510ae), /* PORT174CR */ - PORTCR(175, 0xe60520af), /* PORT175CR */ - PORTCR(176, 0xe60520b0), /* PORT176CR */ - PORTCR(177, 0xe60520b1), /* PORT177CR */ - PORTCR(178, 0xe60520b2), /* PORT178CR */ - PORTCR(179, 0xe60520b3), /* PORT179CR */ - - PORTCR(180, 0xe60520b4), /* PORT180CR */ - PORTCR(181, 0xe60520b5), /* PORT181CR */ - PORTCR(182, 0xe60520b6), /* PORT182CR */ - PORTCR(183, 0xe60520b7), /* PORT183CR */ - PORTCR(184, 0xe60520b8), /* PORT184CR */ - PORTCR(185, 0xe60520b9), /* PORT185CR */ - PORTCR(186, 0xe60520ba), /* PORT186CR */ - PORTCR(187, 0xe60520bb), /* PORT187CR */ - PORTCR(188, 0xe60520bc), /* PORT188CR */ - PORTCR(189, 0xe60520bd), /* PORT189CR */ - - PORTCR(190, 0xe60520be), /* PORT190CR */ - PORTCR(191, 0xe60520bf), /* PORT191CR */ - PORTCR(192, 0xe60520c0), /* PORT192CR */ - PORTCR(193, 0xe60520c1), /* PORT193CR */ - PORTCR(194, 0xe60520c2), /* PORT194CR */ - PORTCR(195, 0xe60520c3), /* PORT195CR */ - PORTCR(196, 0xe60520c4), /* PORT196CR */ - PORTCR(197, 0xe60520c5), /* PORT197CR */ - PORTCR(198, 0xe60520c6), /* PORT198CR */ - PORTCR(199, 0xe60520c7), /* PORT199CR */ - - PORTCR(200, 0xe60520c8), /* PORT200CR */ - PORTCR(201, 0xe60520c9), /* PORT201CR */ - PORTCR(202, 0xe60520ca), /* PORT202CR */ - PORTCR(203, 0xe60520cb), /* PORT203CR */ - PORTCR(204, 0xe60520cc), /* PORT204CR */ - PORTCR(205, 0xe60520cd), /* PORT205CR */ - PORTCR(206, 0xe60520ce), /* PORT206CR */ - PORTCR(207, 0xe60520cf), /* PORT207CR */ - PORTCR(208, 0xe60520d0), /* PORT208CR */ - PORTCR(209, 0xe60520d1), /* PORT209CR */ - - PORTCR(210, 0xe60520d2), /* PORT210CR */ - PORTCR(211, 0xe60520d3), /* PORT211CR */ - PORTCR(212, 0xe60520d4), /* PORT212CR */ - PORTCR(213, 0xe60520d5), /* PORT213CR */ - PORTCR(214, 0xe60520d6), /* PORT214CR */ - PORTCR(215, 0xe60520d7), /* PORT215CR */ - PORTCR(216, 0xe60520d8), /* PORT216CR */ - PORTCR(217, 0xe60520d9), /* PORT217CR */ - PORTCR(218, 0xe60520da), /* PORT218CR */ - PORTCR(219, 0xe60520db), /* PORT219CR */ - - PORTCR(220, 0xe60520dc), /* PORT220CR */ - PORTCR(221, 0xe60520dd), /* PORT221CR */ - PORTCR(222, 0xe60520de), /* PORT222CR */ - PORTCR(223, 0xe60520df), /* PORT223CR */ - PORTCR(224, 0xe60520e0), /* PORT224CR */ - PORTCR(225, 0xe60520e1), /* PORT225CR */ - PORTCR(226, 0xe60520e2), /* PORT226CR */ - PORTCR(227, 0xe60520e3), /* PORT227CR */ - PORTCR(228, 0xe60520e4), /* PORT228CR */ - PORTCR(229, 0xe60520e5), /* PORT229CR */ - - PORTCR(230, 0xe60520e6), /* PORT230CR */ - PORTCR(231, 0xe60520e7), /* PORT231CR */ - PORTCR(232, 0xe60520e8), /* PORT232CR */ - PORTCR(233, 0xe60520e9), /* PORT233CR */ - PORTCR(234, 0xe60520ea), /* PORT234CR */ - PORTCR(235, 0xe60520eb), /* PORT235CR */ - PORTCR(236, 0xe60530ec), /* PORT236CR */ - PORTCR(237, 0xe60530ed), /* PORT237CR */ - PORTCR(238, 0xe60530ee), /* PORT238CR */ - PORTCR(239, 0xe60530ef), /* PORT239CR */ - - PORTCR(240, 0xe60530f0), /* PORT240CR */ - PORTCR(241, 0xe60530f1), /* PORT241CR */ - PORTCR(242, 0xe60530f2), /* PORT242CR */ - PORTCR(243, 0xe60530f3), /* PORT243CR */ - PORTCR(244, 0xe60530f4), /* PORT244CR */ - PORTCR(245, 0xe60530f5), /* PORT245CR */ - PORTCR(246, 0xe60530f6), /* PORT246CR */ - PORTCR(247, 0xe60530f7), /* PORT247CR */ - PORTCR(248, 0xe60530f8), /* PORT248CR */ - PORTCR(249, 0xe60530f9), /* PORT249CR */ - - PORTCR(250, 0xe60530fa), /* PORT250CR */ - PORTCR(251, 0xe60530fb), /* PORT251CR */ - PORTCR(252, 0xe60530fc), /* PORT252CR */ - PORTCR(253, 0xe60530fd), /* PORT253CR */ - PORTCR(254, 0xe60530fe), /* PORT254CR */ - PORTCR(255, 0xe60530ff), /* PORT255CR */ - PORTCR(256, 0xe6053100), /* PORT256CR */ - PORTCR(257, 0xe6053101), /* PORT257CR */ - PORTCR(258, 0xe6053102), /* PORT258CR */ - PORTCR(259, 0xe6053103), /* PORT259CR */ - - PORTCR(260, 0xe6053104), /* PORT260CR */ - PORTCR(261, 0xe6053105), /* PORT261CR */ - PORTCR(262, 0xe6053106), /* PORT262CR */ - PORTCR(263, 0xe6053107), /* PORT263CR */ - PORTCR(264, 0xe6053108), /* PORT264CR */ - PORTCR(265, 0xe6053109), /* PORT265CR */ - PORTCR(266, 0xe605310a), /* PORT266CR */ - PORTCR(267, 0xe605310b), /* PORT267CR */ - PORTCR(268, 0xe605310c), /* PORT268CR */ - PORTCR(269, 0xe605310d), /* PORT269CR */ - - PORTCR(270, 0xe605310e), /* PORT270CR */ - PORTCR(271, 0xe605310f), /* PORT271CR */ - PORTCR(272, 0xe6053110), /* PORT272CR */ - - { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - MSELBCR_MSEL2_0, MSELBCR_MSEL2_1, - 0, 0, - 0, 0 } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { - PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, - PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, - PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, - PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, - PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, - PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, - PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, - PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } - }, - { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) { - PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, - PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, - PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, - PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, - PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, - PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, - PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, - PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } - }, - { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) { - PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, - PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, - PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, - PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, - PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, - PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, - PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, - PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } - }, - { PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) { - PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA, - PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA, - PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA, - PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, - PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, - PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, - PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, - PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } - }, - { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) { - PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, - PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, - PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, - PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, - PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, - PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, - PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, - PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } - }, - { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) { - PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA, - PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA, - PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA, - PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA, - PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA, - PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA, - PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA, - PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } - }, - { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) { - PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, - PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, - PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, - PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, - PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, - PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, - PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, - PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } - }, - { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) { - PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, - PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, - PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, - PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, - PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, - PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, - PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, - PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } - }, - { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT272_DATA, - PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA, - PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA, - PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, - PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } - }, - { }, -}; - -static struct pinmux_info sh7367_pinmux_info = { - .name = "sh7367_pfc", - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_PORT0, - .last_gpio = GPIO_FN_DIVLOCK, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), -}; - -void sh7367_pinmux_init(void) -{ - register_pinmux(&sh7367_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c deleted file mode 100644 index f3117f67fa25..000000000000 --- a/arch/arm/mach-shmobile/pfc-sh7377.c +++ /dev/null @@ -1,1688 +0,0 @@ -/* - * sh7377 processor support - PFC hardware block - * - * Copyright (C) 2010 NISHIMOTO Hiroki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the - * License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sh_pfc.h> -#include <mach/sh7377.h> - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ - PORT_10(fn, pfx##10, sfx), \ - PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \ - PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \ - PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \ - PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \ - PORT_1(fn, pfx##118, sfx), \ - PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \ - PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \ - PORT_10(fn, pfx##15, sfx), \ - PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \ - PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \ - PORT_1(fn, pfx##164, sfx), \ - PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \ - PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \ - PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \ - PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \ - PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \ - PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \ - PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \ - PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx), \ - PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx), \ - PORT_1(fn, pfx##264, sfx) - -enum { - PINMUX_RESERVED = 0, - - PINMUX_DATA_BEGIN, - PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */ - PINMUX_DATA_END, - - PINMUX_INPUT_BEGIN, - PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */ - PINMUX_INPUT_END, - - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */ - PINMUX_INPUT_PULLUP_END, - - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */ - PINMUX_INPUT_PULLDOWN_END, - - PINMUX_OUTPUT_BEGIN, - PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */ - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */ - PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */ - PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */ - PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */ - PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */ - PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */ - PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */ - PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */ - PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */ - PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */ - - MSELBCR_MSEL17_1, MSELBCR_MSEL17_0, - MSELBCR_MSEL16_1, MSELBCR_MSEL16_0, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - /* Special Pull-up / Pull-down Functions */ - PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK, - PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK, - PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK, - PORT72_KEYIN6_PU_MARK, - - /* 55-1 */ - VBUS_0_MARK, - CPORT0_MARK, - CPORT1_MARK, - CPORT2_MARK, - CPORT3_MARK, - CPORT4_MARK, - CPORT5_MARK, - CPORT6_MARK, - CPORT7_MARK, - CPORT8_MARK, - CPORT9_MARK, - CPORT10_MARK, - CPORT11_MARK, SIN2_MARK, - CPORT12_MARK, XCTS2_MARK, - CPORT13_MARK, RFSPO4_MARK, - CPORT14_MARK, RFSPO5_MARK, - CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK, - CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK, - CPORT17_IC_OE_MARK, SOUT2_MARK, - CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK, - CPORT19_MPORT1_MARK, - CPORT20_MARK, RFSPO6_MARK, - CPORT21_MARK, STATUS0_MARK, - CPORT22_MARK, STATUS1_MARK, - CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK, - B_SYNLD1_MARK, - B_SYNLD2_MARK, SYSENMSK_MARK, - XMAINPS_MARK, - XDIVPS_MARK, - XIDRST_MARK, - IDCLK_MARK, IC_DP_MARK, - IDIO_MARK, IC_DM_MARK, - SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK, - SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK, - XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK, - XCTS1_MARK, SCIFA4_CTS_MARK, - PCMCLKO_MARK, - SYNC8KO_MARK, - - /* 55-2 */ - DNPCM_A_MARK, - UPPCM_A_MARK, - VACK_MARK, - XTALB1L_MARK, - GPS_AGC1_MARK, SCIFA0_RTS_MARK, - GPS_AGC4_MARK, SCIFA0_RXD_MARK, - GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK, - GPS_IM_MARK, - GPS_IS_MARK, - GPS_QM_MARK, - GPS_QS_MARK, - FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, - FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK, - FMSIOLR_MARK, - FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK, - FMSIOBT_MARK, - FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK, - FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK, - FMSIILR_MARK, - FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK, - FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK, - A0_EA0_MARK, BS_MARK, - A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK, - A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK, - A14_EA14_MARK, PORT60_KEYOUT5_MARK, - A15_EA15_MARK, PORT61_KEYOUT4_MARK, - A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK, - A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK, - A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK, - A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK, - A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK, - A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK, - A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK, - A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK, - A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK, - A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK, - A26_MARK, PORT72_KEYIN6_MARK, - D0_ED0_NAF0_MARK, - D1_ED1_NAF1_MARK, - D2_ED2_NAF2_MARK, - D3_ED3_NAF3_MARK, - D4_ED4_NAF4_MARK, - D5_ED5_NAF5_MARK, - D6_ED6_NAF6_MARK, - D7_ED7_NAF7_MARK, - D8_ED8_NAF8_MARK, - D9_ED9_NAF9_MARK, - D10_ED10_NAF10_MARK, - D11_ED11_NAF11_MARK, - D12_ED12_NAF12_MARK, - D13_ED13_NAF13_MARK, - D14_ED14_NAF14_MARK, - D15_ED15_NAF15_MARK, - CS4_MARK, - CS5A_MARK, FMSICK_MARK, - CS5B_MARK, FCE1_MARK, - - /* 55-3 */ - CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK, - FCE0_MARK, - WAIT_MARK, DREQ0_MARK, - RD_XRD_MARK, - WE0_XWR0_FWE_MARK, - WE1_XWR1_MARK, - FRB_MARK, - CKO_MARK, - NBRSTOUT_MARK, - NBRST_MARK, - GPS_EPPSIN_MARK, - LATCHPULSE_MARK, - LTESIGNAL_MARK, - LEGACYSTATE_MARK, - TCKON_MARK, - VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK, - VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK, - VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK, - VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK, - VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK, - VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK, - VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK, - VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK, - VIO_D6_MARK, PORT136_KEYIN2_MARK, - VIO_D7_MARK, PORT137_KEYIN3_MARK, - VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK, - VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK, - VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK, - VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK, - VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK, - VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK, - VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK, - VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK, - VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK, - VIO_FIELD_MARK, PORT147_KEYIN5_MARK, - VIO_CKO_MARK, PORT148_KEYIN6_MARK, - A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK, - MFG0_IN2_MARK, - TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK, - TS_SDAT3_MARK, MSIOF2_RSYNC_MARK, - TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK, - SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK, - SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK, - XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK, - XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK, - - /* 55-4 */ - DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, - PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK, - PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK, - PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK, - MFG3_IN2_MARK, - PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK, - MFG3_IN1_MARK, - PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK, - MFG3_OUT1_MARK, TPU3TO0_MARK, - LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK, - LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK, - BBIF2_TSYNC1_MARK, - LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK, - BBIF2_TSCK1_MARK, - LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK, - BBIF2_TXD1_MARK, - LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK, - LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK, - MFG2_OUT2_MARK, - TPU2TO1_MARK, - LCDD6_MARK, XWR2_MARK, - LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK, - LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK, - LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK, - LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK, - LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK, - LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK, - LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK, - LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK, - LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK, - VIO_DR7_MARK, D23_MARK, ED23_MARK, - LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK, - VIO_VDR_MARK, D24_MARK, ED24_MARK, - LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK, - LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK, - LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK, - LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK, - LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK, - LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK, - LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK, - LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK, - LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK, - LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK, - PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK, - LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK, - LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK, - LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK, - LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, - SCIFA1_TXD_MARK, OVCN2_MARK, - EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK, - SCIFA1_RTS_MARK, IDIN_MARK, - SCIFA1_RXD_MARK, - SCIFA1_CTS_MARK, MFG1_IN1_MARK, - MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK, - MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK, - MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK, - MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK, - PORT233_FSIACK_MARK, - MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK, - MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK, - MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK, - MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK, - MSIOF1_SS1_MARK, EDBGREQ3_MARK, - - /* 55-5 */ - MSIOF1_SS2_MARK, - SCIFA6_TXD_MARK, - PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, - TPU4TO0_MARK, - PORT242_IRDA_IN_MARK, MFG4_IN2_MARK, - PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK, - PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK, - PORT244_MSIOF2_RXD_MARK, - PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK, - PORT245_MSIOF2_TXD_MARK, - PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, - TPU1TO0_MARK, - PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, - TPU3TO1_MARK, - PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, - TPU2TO0_MARK, - PORT248_MSIOF2_TSCK_MARK, - PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK, - SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK, - SDHICD0_MARK, - SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK, - SDHID0_1_MARK, TDO2_SWO0_MC0_MARK, - SDHID0_2_MARK, TDI2_MARK, - SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK, - SDHICMD0_MARK, TRST2_MARK, - SDHIWP0_MARK, EDBGREQ2_MARK, - SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK, - SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK, - TMS3_SWDIO_MC1_MARK, - SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK, - SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK, - SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK, - SDHICMD1_MARK, TRST3_MARK, - RESETOUTS_MARK, - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - /* specify valid pin states for each pin in GPIO mode */ - /* 55-1 (GPIO) */ - PORT_DATA_I_PD(0), PORT_DATA_I_PU(1), - PORT_DATA_I_PU(2), PORT_DATA_I_PU(3), - PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), - PORT_DATA_I_PU(6), PORT_DATA_I_PU(7), - PORT_DATA_I_PU(8), PORT_DATA_I_PU(9), - PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), - PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13), - PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15), - PORT_DATA_O(16), PORT_DATA_IO(17), - PORT_DATA_O(18), PORT_DATA_O(19), - PORT_DATA_O(20), PORT_DATA_O(21), - PORT_DATA_O(22), PORT_DATA_O(23), - PORT_DATA_O(24), PORT_DATA_I_PD(25), - PORT_DATA_I_PD(26), PORT_DATA_O(27), - PORT_DATA_O(28), PORT_DATA_O(29), - PORT_DATA_IO(30), PORT_DATA_IO_PU(31), - PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33), - PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35), - PORT_DATA_O(36), PORT_DATA_IO(37), - - /* 55-2 (GPIO) */ - PORT_DATA_O(38), PORT_DATA_I_PU(39), - PORT_DATA_I_PU_PD(40), PORT_DATA_O(41), - PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43), - PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45), - PORT_DATA_I_PD(46), PORT_DATA_I_PD(47), - PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49), - PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51), - PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53), - PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55), - PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57), - PORT_DATA_IO(58), PORT_DATA_IO(59), - PORT_DATA_IO(60), PORT_DATA_IO(61), - PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63), - PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65), - PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67), - PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69), - PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71), - PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73), - PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75), - PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77), - PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79), - PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81), - PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83), - PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85), - PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87), - PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89), - PORT_DATA_O(90), PORT_DATA_IO_PU(91), - PORT_DATA_O(92), - - /* 55-3 (GPIO) */ - PORT_DATA_IO_PU(93), - PORT_DATA_O(94), - PORT_DATA_I_PU_PD(95), - PORT_DATA_IO(96), PORT_DATA_IO(97), - PORT_DATA_IO(98), PORT_DATA_I_PU(99), - PORT_DATA_O(100), PORT_DATA_O(101), - PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103), - PORT_DATA_I_PD(104), PORT_DATA_I_PD(105), - PORT_DATA_I_PD(106), PORT_DATA_I_PD(107), - PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109), - PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111), - PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113), - PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115), - PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117), - PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128), - PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130), - PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132), - PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134), - PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136), - PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138), - PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140), - PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142), - PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144), - PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146), - PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148), - PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150), - PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152), - PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), - PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156), - PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158), - - /* 55-4 (GPIO) */ - PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160), - PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162), - PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164), - PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193), - PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195), - PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), - PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199), - PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201), - PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203), - PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205), - PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207), - PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209), - PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), - PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), - PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215), - PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217), - PORT_DATA_O(218), PORT_DATA_IO_PD(219), - PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221), - PORT_DATA_IO_PU_PD(222), - PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224), - PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226), - PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228), - PORT_DATA_I_PD(229), PORT_DATA_IO(230), - PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232), - PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234), - PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236), - PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238), - - /* 55-5 (GPIO) */ - PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240), - PORT_DATA_O(241), PORT_DATA_I_PD(242), - PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244), - PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246), - PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248), - PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250), - PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252), - PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254), - PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256), - PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258), - PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260), - PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262), - PORT_DATA_IO_PU_PD(263), - - /* Special Pull-up / Pull-down Functions */ - PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT66_FN2, PORT66_IN_PU), - PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT67_FN2, PORT67_IN_PU), - PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT68_FN2, PORT68_IN_PU), - PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT69_FN2, PORT69_IN_PU), - PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT70_FN2, PORT70_IN_PU), - PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT71_FN2, PORT71_IN_PU), - PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT72_FN2, PORT72_IN_PU), - - - /* 55-1 (FN) */ - PINMUX_DATA(VBUS_0_MARK, PORT0_FN1), - PINMUX_DATA(CPORT0_MARK, PORT1_FN1), - PINMUX_DATA(CPORT1_MARK, PORT2_FN1), - PINMUX_DATA(CPORT2_MARK, PORT3_FN1), - PINMUX_DATA(CPORT3_MARK, PORT4_FN1), - PINMUX_DATA(CPORT4_MARK, PORT5_FN1), - PINMUX_DATA(CPORT5_MARK, PORT6_FN1), - PINMUX_DATA(CPORT6_MARK, PORT7_FN1), - PINMUX_DATA(CPORT7_MARK, PORT8_FN1), - PINMUX_DATA(CPORT8_MARK, PORT9_FN1), - PINMUX_DATA(CPORT9_MARK, PORT10_FN1), - PINMUX_DATA(CPORT10_MARK, PORT11_FN1), - PINMUX_DATA(CPORT11_MARK, PORT12_FN1), - PINMUX_DATA(SIN2_MARK, PORT12_FN2), - PINMUX_DATA(CPORT12_MARK, PORT13_FN1), - PINMUX_DATA(XCTS2_MARK, PORT13_FN2), - PINMUX_DATA(CPORT13_MARK, PORT14_FN1), - PINMUX_DATA(RFSPO4_MARK, PORT14_FN2), - PINMUX_DATA(CPORT14_MARK, PORT15_FN1), - PINMUX_DATA(RFSPO5_MARK, PORT15_FN2), - PINMUX_DATA(CPORT15_MARK, PORT16_FN1), - PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), - PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3), - PINMUX_DATA(CPORT16_MARK, PORT17_FN1), - PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2), - PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3), - PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1), - PINMUX_DATA(SOUT2_MARK, PORT18_FN2), - PINMUX_DATA(CPORT18_MARK, PORT19_FN1), - PINMUX_DATA(XRTS2_MARK, PORT19_FN2), - PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3), - PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1), - PINMUX_DATA(CPORT20_MARK, PORT21_FN1), - PINMUX_DATA(RFSPO6_MARK, PORT21_FN2), - PINMUX_DATA(CPORT21_MARK, PORT22_FN1), - PINMUX_DATA(STATUS0_MARK, PORT22_FN2), - PINMUX_DATA(CPORT22_MARK, PORT23_FN1), - PINMUX_DATA(STATUS1_MARK, PORT23_FN2), - PINMUX_DATA(CPORT23_MARK, PORT24_FN1), - PINMUX_DATA(STATUS2_MARK, PORT24_FN2), - PINMUX_DATA(RFSPO7_MARK, PORT24_FN3), - PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1), - PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1), - PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2), - PINMUX_DATA(XMAINPS_MARK, PORT27_FN1), - PINMUX_DATA(XDIVPS_MARK, PORT28_FN1), - PINMUX_DATA(XIDRST_MARK, PORT29_FN1), - PINMUX_DATA(IDCLK_MARK, PORT30_FN1), - PINMUX_DATA(IC_DP_MARK, PORT30_FN2), - PINMUX_DATA(IDIO_MARK, PORT31_FN1), - PINMUX_DATA(IC_DM_MARK, PORT31_FN2), - PINMUX_DATA(SOUT1_MARK, PORT32_FN1), - PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2), - PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3), - PINMUX_DATA(SIN1_MARK, PORT33_FN1), - PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), - PINMUX_DATA(XWUP_MARK, PORT33_FN3), - PINMUX_DATA(XRTS1_MARK, PORT34_FN1), - PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2), - PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3), - PINMUX_DATA(XCTS1_MARK, PORT35_FN1), - PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2), - PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1), - PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1), - - /* 55-2 (FN) */ - PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1), - PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1), - PINMUX_DATA(VACK_MARK, PORT40_FN1), - PINMUX_DATA(XTALB1L_MARK, PORT41_FN1), - PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1), - PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2), - PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1), - PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2), - PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1), - PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2), - PINMUX_DATA(GPS_IM_MARK, PORT45_FN1), - PINMUX_DATA(GPS_IS_MARK, PORT46_FN1), - PINMUX_DATA(GPS_QM_MARK, PORT47_FN1), - PINMUX_DATA(GPS_QS_MARK, PORT48_FN1), - PINMUX_DATA(FMSOCK_MARK, PORT49_FN1), - PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2), - PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3), - PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1), - PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), - PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), - PINMUX_DATA(IPORT3_MARK, PORT50_FN4), - PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5), - PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1), - PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), - PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), - PINMUX_DATA(OPORT1_MARK, PORT51_FN4), - PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5), - PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1), - PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2), - PINMUX_DATA(OPORT2_MARK, PORT52_FN3), - PINMUX_DATA(FMSOILR_MARK, PORT53_FN1), - PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2), - PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), - PINMUX_DATA(OPORT3_MARK, PORT53_FN4), - PINMUX_DATA(FMSIILR_MARK, PORT53_FN5), - PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1), - PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2), - PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), - PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4), - PINMUX_DATA(FMSISLD_MARK, PORT55_FN1), - PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2), - PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3), - PINMUX_DATA(A0_EA0_MARK, PORT57_FN1), - PINMUX_DATA(BS_MARK, PORT57_FN2), - PINMUX_DATA(A12_EA12_MARK, PORT58_FN1), - PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2), - PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3), - PINMUX_DATA(A13_EA13_MARK, PORT59_FN1), - PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2), - PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3), - PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4), - PINMUX_DATA(A14_EA14_MARK, PORT60_FN1), - PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2), - PINMUX_DATA(A15_EA15_MARK, PORT61_FN1), - PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2), - PINMUX_DATA(A16_EA16_MARK, PORT62_FN1), - PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2), - PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3), - PINMUX_DATA(A17_EA17_MARK, PORT63_FN1), - PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2), - PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3), - PINMUX_DATA(A18_EA18_MARK, PORT64_FN1), - PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2), - PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3), - PINMUX_DATA(A19_EA19_MARK, PORT65_FN1), - PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2), - PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3), - PINMUX_DATA(A20_EA20_MARK, PORT66_FN1), - PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2), - PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3), - PINMUX_DATA(A21_EA21_MARK, PORT67_FN1), - PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2), - PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3), - PINMUX_DATA(A22_EA22_MARK, PORT68_FN1), - PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2), - PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3), - PINMUX_DATA(A23_EA23_MARK, PORT69_FN1), - PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2), - PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3), - PINMUX_DATA(A24_EA24_MARK, PORT70_FN1), - PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2), - PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3), - PINMUX_DATA(A25_EA25_MARK, PORT71_FN1), - PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2), - PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3), - PINMUX_DATA(A26_MARK, PORT72_FN1), - PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2), - PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1), - PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1), - PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1), - PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1), - PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1), - PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1), - PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1), - PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1), - PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1), - PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1), - PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1), - PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1), - PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1), - PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1), - PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1), - PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1), - PINMUX_DATA(CS4_MARK, PORT90_FN1), - PINMUX_DATA(CS5A_MARK, PORT91_FN1), - PINMUX_DATA(FMSICK_MARK, PORT91_FN2), - PINMUX_DATA(CS5B_MARK, PORT92_FN1), - PINMUX_DATA(FCE1_MARK, PORT92_FN2), - - /* 55-3 (FN) */ - PINMUX_DATA(CS6B_MARK, PORT93_FN1), - PINMUX_DATA(XCS2_MARK, PORT93_FN2), - PINMUX_DATA(CS6A_MARK, PORT93_FN3), - PINMUX_DATA(DACK0_MARK, PORT93_FN4), - PINMUX_DATA(FCE0_MARK, PORT94_FN1), - PINMUX_DATA(WAIT_MARK, PORT95_FN1), - PINMUX_DATA(DREQ0_MARK, PORT95_FN2), - PINMUX_DATA(RD_XRD_MARK, PORT96_FN1), - PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1), - PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1), - PINMUX_DATA(FRB_MARK, PORT99_FN1), - PINMUX_DATA(CKO_MARK, PORT100_FN1), - PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1), - PINMUX_DATA(NBRST_MARK, PORT102_FN1), - PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1), - PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1), - PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1), - PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1), - PINMUX_DATA(TCKON_MARK, PORT118_FN1), - PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), - PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2), - PINMUX_DATA(IPORT0_MARK, PORT128_FN3), - PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), - PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2), - PINMUX_DATA(IPORT1_MARK, PORT129_FN3), - PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), - PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2), - PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3), - PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), - PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2), - PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), - PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), - PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2), - PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), - PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), - PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2), - PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3), - PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), - PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2), - PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3), - PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), - PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2), - PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3), - PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), - PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2), - PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), - PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2), - PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), - PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2), - PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3), - PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), - PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2), - PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3), - PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), - PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2), - PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3), - PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4), - PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), - PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2), - PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3), - PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4), - PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), - PINMUX_DATA(M13_BSW_MARK, PORT142_FN2), - PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3), - PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), - PINMUX_DATA(M14_GSW_MARK, PORT143_FN2), - PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3), - PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), - PINMUX_DATA(M15_RSW_MARK, PORT144_FN2), - PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3), - PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), - PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2), - PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3), - PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), - PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2), - PINMUX_DATA(IPORT2_MARK, PORT146_FN3), - PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), - PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2), - PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1), - PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2), - PINMUX_DATA(A27_MARK, PORT149_FN1), - PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2), - PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), - PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1), - PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1), - PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2), - PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1), - PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2), - PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1), - PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2), - PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3), - PINMUX_DATA(SOUT3_MARK, PORT154_FN1), - PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2), - PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3), - PINMUX_DATA(SIN3_MARK, PORT155_FN1), - PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2), - PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3), - PINMUX_DATA(XRTS3_MARK, PORT156_FN1), - PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2), - PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3), - PINMUX_DATA(XCTS3_MARK, PORT157_FN1), - PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2), - PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3), - - /* 55-4 (FN) */ - PINMUX_DATA(DINT_MARK, PORT158_FN1), - PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2), - PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3), - PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1), - PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2), - PINMUX_DATA(NMI_MARK, PORT159_FN3), - PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1), - PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2), - PINMUX_DATA(SOUT0_MARK, PORT160_FN3), - PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1), - PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2), - PINMUX_DATA(XCTS0_MARK, PORT161_FN3), - PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4), - PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1), - PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2), - PINMUX_DATA(SIN0_MARK, PORT162_FN3), - PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4), - PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1), - PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2), - PINMUX_DATA(XRTS0_MARK, PORT163_FN3), - PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4), - PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5), - PINMUX_DATA(LCDD0_MARK, PORT192_FN1), - PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2), - PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3), - PINMUX_DATA(LCDD1_MARK, PORT193_FN1), - PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2), - PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3), - PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4), - PINMUX_DATA(LCDD2_MARK, PORT194_FN1), - PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2), - PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3), - PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4), - PINMUX_DATA(LCDD3_MARK, PORT195_FN1), - PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2), - PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3), - PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4), - PINMUX_DATA(LCDD4_MARK, PORT196_FN1), - PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2), - PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3), - PINMUX_DATA(LCDD5_MARK, PORT197_FN1), - PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2), - PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3), - PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4), - PINMUX_DATA(LCDD6_MARK, PORT198_FN1), - PINMUX_DATA(LCDD7_MARK, PORT199_FN1), - PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), - PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3), - PINMUX_DATA(LCDD8_MARK, PORT200_FN1), - PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2), - PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3), - PINMUX_DATA(D16_MARK, PORT200_FN4), - PINMUX_DATA(LCDD9_MARK, PORT201_FN1), - PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2), - PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3), - PINMUX_DATA(D17_MARK, PORT201_FN4), - PINMUX_DATA(LCDD10_MARK, PORT202_FN1), - PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2), - PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3), - PINMUX_DATA(D18_MARK, PORT202_FN4), - PINMUX_DATA(LCDD11_MARK, PORT203_FN1), - PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2), - PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3), - PINMUX_DATA(D19_MARK, PORT203_FN4), - PINMUX_DATA(LCDD12_MARK, PORT204_FN1), - PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2), - PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3), - PINMUX_DATA(D20_MARK, PORT204_FN4), - PINMUX_DATA(LCDD13_MARK, PORT205_FN1), - PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2), - PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3), - PINMUX_DATA(D21_MARK, PORT205_FN4), - PINMUX_DATA(LCDD14_MARK, PORT206_FN1), - PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2), - PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3), - PINMUX_DATA(D22_MARK, PORT206_FN4), - PINMUX_DATA(LCDD15_MARK, PORT207_FN1), - PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2), - PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3), - PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4), - PINMUX_DATA(D23_MARK, PORT207_FN5), - PINMUX_DATA(LCDD16_MARK, PORT208_FN1), - PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2), - PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3), - PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4), - PINMUX_DATA(D24_MARK, PORT208_FN5), - PINMUX_DATA(LCDD17_MARK, PORT209_FN1), - PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2), - PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3), - PINMUX_DATA(D25_MARK, PORT209_FN4), - PINMUX_DATA(LCDD18_MARK, PORT210_FN1), - PINMUX_DATA(DREQ2_MARK, PORT210_FN2), - PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3), - PINMUX_DATA(D26_MARK, PORT210_FN4), - PINMUX_DATA(LCDD19_MARK, PORT211_FN1), - PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2), - PINMUX_DATA(D27_MARK, PORT211_FN3), - PINMUX_DATA(LCDD20_MARK, PORT212_FN1), - PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), - PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3), - PINMUX_DATA(D28_MARK, PORT212_FN4), - PINMUX_DATA(LCDD21_MARK, PORT213_FN1), - PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), - PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3), - PINMUX_DATA(D29_MARK, PORT213_FN4), - PINMUX_DATA(LCDD22_MARK, PORT214_FN1), - PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), - PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3), - PINMUX_DATA(D30_MARK, PORT214_FN4), - PINMUX_DATA(LCDD23_MARK, PORT215_FN1), - PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), - PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3), - PINMUX_DATA(D31_MARK, PORT215_FN4), - PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), - PINMUX_DATA(LCDWR_MARK, PORT216_FN2), - PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3), - PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4), - PINMUX_DATA(LCDRD_MARK, PORT217_FN1), - PINMUX_DATA(DACK2_MARK, PORT217_FN2), - PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3), - PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), - PINMUX_DATA(LCDCS_MARK, PORT218_FN2), - PINMUX_DATA(LCDCS2_MARK, PORT218_FN3), - PINMUX_DATA(DACK3_MARK, PORT218_FN4), - PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5), - PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6), - PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), - PINMUX_DATA(LCDRS_MARK, PORT219_FN2), - PINMUX_DATA(DREQ3_MARK, PORT219_FN3), - PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4), - PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), - PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2), - PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3), - PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), - PINMUX_DATA(DREQ1_MARK, PORT221_FN2), - PINMUX_DATA(PWEN_MARK, PORT221_FN3), - PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4), - PINMUX_DATA(LCDDON_MARK, PORT222_FN1), - PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), - PINMUX_DATA(DACK1_MARK, PORT222_FN3), - PINMUX_DATA(OVCN_MARK, PORT222_FN4), - PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5), - PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1), - PINMUX_DATA(OVCN2_MARK, PORT225_FN2), - PINMUX_DATA(EXTLP_MARK, PORT226_FN1), - PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), - PINMUX_DATA(USBTERM_MARK, PORT226_FN3), - PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4), - PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1), - PINMUX_DATA(IDIN_MARK, PORT227_FN2), - PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1), - PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1), - PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2), - PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), - PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2), - PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3), - PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), - PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2), - PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3), - PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), - PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2), - PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3), - PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), - PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2), - PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3), - PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4), - PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), - PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2), - PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3), - PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), - PINMUX_DATA(OPORT0_MARK, PORT235_FN2), - PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), - PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4), - PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), - PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2), - PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3), - PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), - PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2), - PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3), - PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), - PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2), - - /* 55-5 (FN) */ - PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), - PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1), - PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1), - PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), - PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), - PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4), - PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1), - PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2), - PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1), - PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2), - PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1), - PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), - PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3), - PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1), - PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), - PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3), - PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1), - PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), - PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3), - PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4), - PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1), - PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), - PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3), - PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4), - PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1), - PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), - PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3), - PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), - PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), - PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), - PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1), - PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2), - PINMUX_DATA(SDHICD0_MARK, PORT251_FN1), - PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1), - PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2), - PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1), - PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2), - PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1), - PINMUX_DATA(TDI2_MARK, PORT254_FN2), - PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1), - PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2), - PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1), - PINMUX_DATA(TRST2_MARK, PORT256_FN2), - PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1), - PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2), - PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1), - PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2), - PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), - PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2), - PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3), - PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4), - PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), - PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2), - PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3), - PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4), - PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), - PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2), - PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3), - PINMUX_DATA(TDI3_MARK, PORT261_FN4), - PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), - PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2), - PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3), - PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4), - PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1), - PINMUX_DATA(TRST3_MARK, PORT263_FN2), - PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - /* 55-1 -> 55-5 (GPIO) */ - GPIO_PORT_ALL(), - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU), - GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU), - GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU), - GPIO_FN(PORT72_KEYIN6_PU), - - /* 55-1 (FN) */ - GPIO_FN(VBUS_0), - GPIO_FN(CPORT0), - GPIO_FN(CPORT1), - GPIO_FN(CPORT2), - GPIO_FN(CPORT3), - GPIO_FN(CPORT4), - GPIO_FN(CPORT5), - GPIO_FN(CPORT6), - GPIO_FN(CPORT7), - GPIO_FN(CPORT8), - GPIO_FN(CPORT9), - GPIO_FN(CPORT10), - GPIO_FN(CPORT11), GPIO_FN(SIN2), - GPIO_FN(CPORT12), GPIO_FN(XCTS2), - GPIO_FN(CPORT13), GPIO_FN(RFSPO4), - GPIO_FN(CPORT14), GPIO_FN(RFSPO5), - GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2), - GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3), - GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2), - GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2), - GPIO_FN(CPORT19_MPORT1), - GPIO_FN(CPORT20), GPIO_FN(RFSPO6), - GPIO_FN(CPORT21), GPIO_FN(STATUS0), - GPIO_FN(CPORT22), GPIO_FN(STATUS1), - GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7), - GPIO_FN(B_SYNLD1), - GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK), - GPIO_FN(XMAINPS), - GPIO_FN(XDIVPS), - GPIO_FN(XIDRST), - GPIO_FN(IDCLK), GPIO_FN(IC_DP), - GPIO_FN(IDIO), GPIO_FN(IC_DM), - GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT), - GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP), - GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK), - GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS), - GPIO_FN(PCMCLKO), - GPIO_FN(SYNC8KO), - - /* 55-2 (FN) */ - GPIO_FN(DNPCM_A), - GPIO_FN(UPPCM_A), - GPIO_FN(VACK), - GPIO_FN(XTALB1L), - GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS), - GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD), - GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS), - GPIO_FN(GPS_IM), - GPIO_FN(GPS_IS), - GPIO_FN(GPS_QM), - GPIO_FN(GPS_QS), - GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT), - GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2), - GPIO_FN(IPORT3), GPIO_FN(FMSIOLR), - GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3), - GPIO_FN(OPORT1), GPIO_FN(FMSIOBT), - GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2), - GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3), - GPIO_FN(OPORT3), GPIO_FN(FMSIILR), - GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2), - GPIO_FN(FMSIIBT), - GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0), - GPIO_FN(A0_EA0), GPIO_FN(BS), - GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2), - GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2), - GPIO_FN(TPU0TO1), - GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5), - GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4), - GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1), - GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC), - GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK), - GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD), - GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK), - GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC), - GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0), - GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1), - GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD), - GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2), - GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6), - GPIO_FN(D0_ED0_NAF0), - GPIO_FN(D1_ED1_NAF1), - GPIO_FN(D2_ED2_NAF2), - GPIO_FN(D3_ED3_NAF3), - GPIO_FN(D4_ED4_NAF4), - GPIO_FN(D5_ED5_NAF5), - GPIO_FN(D6_ED6_NAF6), - GPIO_FN(D7_ED7_NAF7), - GPIO_FN(D8_ED8_NAF8), - GPIO_FN(D9_ED9_NAF9), - GPIO_FN(D10_ED10_NAF10), - GPIO_FN(D11_ED11_NAF11), - GPIO_FN(D12_ED12_NAF12), - GPIO_FN(D13_ED13_NAF13), - GPIO_FN(D14_ED14_NAF14), - GPIO_FN(D15_ED15_NAF15), - GPIO_FN(CS4), - GPIO_FN(CS5A), GPIO_FN(FMSICK), - - /* 55-3 (FN) */ - GPIO_FN(CS5B), GPIO_FN(FCE1), - GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0), - GPIO_FN(FCE0), - GPIO_FN(WAIT), GPIO_FN(DREQ0), - GPIO_FN(RD_XRD), - GPIO_FN(WE0_XWR0_FWE), - GPIO_FN(WE1_XWR1), - GPIO_FN(FRB), - GPIO_FN(CKO), - GPIO_FN(NBRSTOUT), - GPIO_FN(NBRST), - GPIO_FN(GPS_EPPSIN), - GPIO_FN(LATCHPULSE), - GPIO_FN(LTESIGNAL), - GPIO_FN(LEGACYSTATE), - GPIO_FN(TCKON), - GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0), - GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1), - GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD), - GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1), - GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2), - GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5), - GPIO_FN(PORT133_MSIOF2_TSYNC), - GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD), - GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK), - GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2), - GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3), - GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC), - GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR), - GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2), - GPIO_FN(PORT140_FSIAOBT), - GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3), - GPIO_FN(PORT141_FSIAOSLD), - GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK), - GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR), - GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT), - GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD), - GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2), - GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5), - GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6), - GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1), - GPIO_FN(MFG0_IN2), - GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK), - GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1), - GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0), - GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1), - GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2), - GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD), - - /* 55-4 (FN) */ - GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3), - GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI), - GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0), - GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0), - GPIO_FN(MFG3_IN2), - GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0), - GPIO_FN(MFG3_IN1), - GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0), - GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0), - GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI), - GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS), - GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS), - GPIO_FN(BBIF2_TSCK1), - GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD), - GPIO_FN(BBIF2_TXD1), - GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD), - GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK), - GPIO_FN(MFG2_OUT2), - GPIO_FN(LCDD6), - GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2), - GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0), - GPIO_FN(D16), - GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1), - GPIO_FN(D17), - GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2), - GPIO_FN(D18), - GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3), - GPIO_FN(D19), - GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4), - GPIO_FN(D20), - GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5), - GPIO_FN(D21), - GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6), - GPIO_FN(D22), - GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0), - GPIO_FN(VIO_DR7), GPIO_FN(D23), - GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1), - GPIO_FN(VIO_VDR), GPIO_FN(D24), - GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR), - GPIO_FN(D25), - GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1), - GPIO_FN(D26), - GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27), - GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0), - GPIO_FN(D28), - GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1), - GPIO_FN(D29), - GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK), - GPIO_FN(D30), - GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC), - GPIO_FN(D31), - GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3), - GPIO_FN(VIO_CLKR), - GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC), - GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3), - GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4), - GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK), - GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5), - GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD), - GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN), - GPIO_FN(MSIOF0L_TXD), - GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2), - GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM), - GPIO_FN(PORT226_VIO_CKO2), - GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN), - GPIO_FN(SCIFA1_RXD), - GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1), - GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC), - GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR), - GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT), - GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG), - GPIO_FN(PORT233_FSIACK), - GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD), - GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2), - GPIO_FN(PORT235_FSIAILR), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT), - GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD), - GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3), - - /* 55-5 (FN) */ - GPIO_FN(MSIOF1_SS2), - GPIO_FN(SCIFA6_TXD), - GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1), - GPIO_FN(TPU4TO0), - GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2), - GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2), - GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1), - GPIO_FN(PORT244_SCIFB_CTS), - GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2), - GPIO_FN(PORT245_SCIFB_RTS), - GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1), - GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0), - GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2), - GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1), - GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1), - GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0), - GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1), - GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0), - GPIO_FN(SDHICD0), - GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0), - GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0), - GPIO_FN(SDHID0_2), GPIO_FN(TDI2), - GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0), - GPIO_FN(SDHICMD0), GPIO_FN(TRST2), - GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2), - GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1), - GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2), - GPIO_FN(TMS3_SWDIO_MC1), - GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2), - GPIO_FN(TDO3_SWO0_MC1), - GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2), - GPIO_FN(TDI3), - GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2), - GPIO_FN(RTCK3_SWO1_MC1), - GPIO_FN(SDHICMD1), GPIO_FN(TRST3), - GPIO_FN(RESETOUTS), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - PORTCR(0, 0xe6050000), /* PORT0CR */ - PORTCR(1, 0xe6050001), /* PORT1CR */ - PORTCR(2, 0xe6050002), /* PORT2CR */ - PORTCR(3, 0xe6050003), /* PORT3CR */ - PORTCR(4, 0xe6050004), /* PORT4CR */ - PORTCR(5, 0xe6050005), /* PORT5CR */ - PORTCR(6, 0xe6050006), /* PORT6CR */ - PORTCR(7, 0xe6050007), /* PORT7CR */ - PORTCR(8, 0xe6050008), /* PORT8CR */ - PORTCR(9, 0xe6050009), /* PORT9CR */ - - PORTCR(10, 0xe605000a), /* PORT10CR */ - PORTCR(11, 0xe605000b), /* PORT11CR */ - PORTCR(12, 0xe605000c), /* PORT12CR */ - PORTCR(13, 0xe605000d), /* PORT13CR */ - PORTCR(14, 0xe605000e), /* PORT14CR */ - PORTCR(15, 0xe605000f), /* PORT15CR */ - PORTCR(16, 0xe6050010), /* PORT16CR */ - PORTCR(17, 0xe6050011), /* PORT17CR */ - PORTCR(18, 0xe6050012), /* PORT18CR */ - PORTCR(19, 0xe6050013), /* PORT19CR */ - - PORTCR(20, 0xe6050014), /* PORT20CR */ - PORTCR(21, 0xe6050015), /* PORT21CR */ - PORTCR(22, 0xe6050016), /* PORT22CR */ - PORTCR(23, 0xe6050017), /* PORT23CR */ - PORTCR(24, 0xe6050018), /* PORT24CR */ - PORTCR(25, 0xe6050019), /* PORT25CR */ - PORTCR(26, 0xe605001a), /* PORT26CR */ - PORTCR(27, 0xe605001b), /* PORT27CR */ - PORTCR(28, 0xe605001c), /* PORT28CR */ - PORTCR(29, 0xe605001d), /* PORT29CR */ - - PORTCR(30, 0xe605001e), /* PORT30CR */ - PORTCR(31, 0xe605001f), /* PORT31CR */ - PORTCR(32, 0xe6050020), /* PORT32CR */ - PORTCR(33, 0xe6050021), /* PORT33CR */ - PORTCR(34, 0xe6050022), /* PORT34CR */ - PORTCR(35, 0xe6050023), /* PORT35CR */ - PORTCR(36, 0xe6050024), /* PORT36CR */ - PORTCR(37, 0xe6050025), /* PORT37CR */ - PORTCR(38, 0xe6050026), /* PORT38CR */ - PORTCR(39, 0xe6050027), /* PORT39CR */ - - PORTCR(40, 0xe6050028), /* PORT40CR */ - PORTCR(41, 0xe6050029), /* PORT41CR */ - PORTCR(42, 0xe605002a), /* PORT42CR */ - PORTCR(43, 0xe605002b), /* PORT43CR */ - PORTCR(44, 0xe605002c), /* PORT44CR */ - PORTCR(45, 0xe605002d), /* PORT45CR */ - PORTCR(46, 0xe605002e), /* PORT46CR */ - PORTCR(47, 0xe605002f), /* PORT47CR */ - PORTCR(48, 0xe6050030), /* PORT48CR */ - PORTCR(49, 0xe6050031), /* PORT49CR */ - - PORTCR(50, 0xe6050032), /* PORT50CR */ - PORTCR(51, 0xe6050033), /* PORT51CR */ - PORTCR(52, 0xe6050034), /* PORT52CR */ - PORTCR(53, 0xe6050035), /* PORT53CR */ - PORTCR(54, 0xe6050036), /* PORT54CR */ - PORTCR(55, 0xe6050037), /* PORT55CR */ - PORTCR(56, 0xe6050038), /* PORT56CR */ - PORTCR(57, 0xe6050039), /* PORT57CR */ - PORTCR(58, 0xe605003a), /* PORT58CR */ - PORTCR(59, 0xe605003b), /* PORT59CR */ - - PORTCR(60, 0xe605003c), /* PORT60CR */ - PORTCR(61, 0xe605003d), /* PORT61CR */ - PORTCR(62, 0xe605003e), /* PORT62CR */ - PORTCR(63, 0xe605003f), /* PORT63CR */ - PORTCR(64, 0xe6050040), /* PORT64CR */ - PORTCR(65, 0xe6050041), /* PORT65CR */ - PORTCR(66, 0xe6050042), /* PORT66CR */ - PORTCR(67, 0xe6050043), /* PORT67CR */ - PORTCR(68, 0xe6050044), /* PORT68CR */ - PORTCR(69, 0xe6050045), /* PORT69CR */ - - PORTCR(70, 0xe6050046), /* PORT70CR */ - PORTCR(71, 0xe6050047), /* PORT71CR */ - PORTCR(72, 0xe6050048), /* PORT72CR */ - PORTCR(73, 0xe6050049), /* PORT73CR */ - PORTCR(74, 0xe605004a), /* PORT74CR */ - PORTCR(75, 0xe605004b), /* PORT75CR */ - PORTCR(76, 0xe605004c), /* PORT76CR */ - PORTCR(77, 0xe605004d), /* PORT77CR */ - PORTCR(78, 0xe605004e), /* PORT78CR */ - PORTCR(79, 0xe605004f), /* PORT79CR */ - - PORTCR(80, 0xe6050050), /* PORT80CR */ - PORTCR(81, 0xe6050051), /* PORT81CR */ - PORTCR(82, 0xe6050052), /* PORT82CR */ - PORTCR(83, 0xe6050053), /* PORT83CR */ - PORTCR(84, 0xe6050054), /* PORT84CR */ - PORTCR(85, 0xe6050055), /* PORT85CR */ - PORTCR(86, 0xe6050056), /* PORT86CR */ - PORTCR(87, 0xe6050057), /* PORT87CR */ - PORTCR(88, 0xe6050058), /* PORT88CR */ - PORTCR(89, 0xe6050059), /* PORT89CR */ - - PORTCR(90, 0xe605005a), /* PORT90CR */ - PORTCR(91, 0xe605005b), /* PORT91CR */ - PORTCR(92, 0xe605005c), /* PORT92CR */ - PORTCR(93, 0xe605005d), /* PORT93CR */ - PORTCR(94, 0xe605005e), /* PORT94CR */ - PORTCR(95, 0xe605005f), /* PORT95CR */ - PORTCR(96, 0xe6050060), /* PORT96CR */ - PORTCR(97, 0xe6050061), /* PORT97CR */ - PORTCR(98, 0xe6050062), /* PORT98CR */ - PORTCR(99, 0xe6050063), /* PORT99CR */ - - PORTCR(100, 0xe6050064), /* PORT100CR */ - PORTCR(101, 0xe6050065), /* PORT101CR */ - PORTCR(102, 0xe6050066), /* PORT102CR */ - PORTCR(103, 0xe6050067), /* PORT103CR */ - PORTCR(104, 0xe6050068), /* PORT104CR */ - PORTCR(105, 0xe6050069), /* PORT105CR */ - PORTCR(106, 0xe605006a), /* PORT106CR */ - PORTCR(107, 0xe605006b), /* PORT107CR */ - PORTCR(108, 0xe605006c), /* PORT108CR */ - PORTCR(109, 0xe605006d), /* PORT109CR */ - - PORTCR(110, 0xe605006e), /* PORT110CR */ - PORTCR(111, 0xe605006f), /* PORT111CR */ - PORTCR(112, 0xe6050070), /* PORT112CR */ - PORTCR(113, 0xe6050071), /* PORT113CR */ - PORTCR(114, 0xe6050072), /* PORT114CR */ - PORTCR(115, 0xe6050073), /* PORT115CR */ - PORTCR(116, 0xe6050074), /* PORT116CR */ - PORTCR(117, 0xe6050075), /* PORT117CR */ - PORTCR(118, 0xe6050076), /* PORT118CR */ - - PORTCR(128, 0xe6051080), /* PORT128CR */ - PORTCR(129, 0xe6051081), /* PORT129CR */ - - PORTCR(130, 0xe6051082), /* PORT130CR */ - PORTCR(131, 0xe6051083), /* PORT131CR */ - PORTCR(132, 0xe6051084), /* PORT132CR */ - PORTCR(133, 0xe6051085), /* PORT133CR */ - PORTCR(134, 0xe6051086), /* PORT134CR */ - PORTCR(135, 0xe6051087), /* PORT135CR */ - PORTCR(136, 0xe6051088), /* PORT136CR */ - PORTCR(137, 0xe6051089), /* PORT137CR */ - PORTCR(138, 0xe605108a), /* PORT138CR */ - PORTCR(139, 0xe605108b), /* PORT139CR */ - - PORTCR(140, 0xe605108c), /* PORT140CR */ - PORTCR(141, 0xe605108d), /* PORT141CR */ - PORTCR(142, 0xe605108e), /* PORT142CR */ - PORTCR(143, 0xe605108f), /* PORT143CR */ - PORTCR(144, 0xe6051090), /* PORT144CR */ - PORTCR(145, 0xe6051091), /* PORT145CR */ - PORTCR(146, 0xe6051092), /* PORT146CR */ - PORTCR(147, 0xe6051093), /* PORT147CR */ - PORTCR(148, 0xe6051094), /* PORT148CR */ - PORTCR(149, 0xe6051095), /* PORT149CR */ - - PORTCR(150, 0xe6051096), /* PORT150CR */ - PORTCR(151, 0xe6051097), /* PORT151CR */ - PORTCR(152, 0xe6051098), /* PORT152CR */ - PORTCR(153, 0xe6051099), /* PORT153CR */ - PORTCR(154, 0xe605109a), /* PORT154CR */ - PORTCR(155, 0xe605109b), /* PORT155CR */ - PORTCR(156, 0xe605109c), /* PORT156CR */ - PORTCR(157, 0xe605109d), /* PORT157CR */ - PORTCR(158, 0xe605109e), /* PORT158CR */ - PORTCR(159, 0xe605109f), /* PORT159CR */ - - PORTCR(160, 0xe60510a0), /* PORT160CR */ - PORTCR(161, 0xe60510a1), /* PORT161CR */ - PORTCR(162, 0xe60510a2), /* PORT162CR */ - PORTCR(163, 0xe60510a3), /* PORT163CR */ - PORTCR(164, 0xe60510a4), /* PORT164CR */ - - PORTCR(192, 0xe60520c0), /* PORT192CR */ - PORTCR(193, 0xe60520c1), /* PORT193CR */ - PORTCR(194, 0xe60520c2), /* PORT194CR */ - PORTCR(195, 0xe60520c3), /* PORT195CR */ - PORTCR(196, 0xe60520c4), /* PORT196CR */ - PORTCR(197, 0xe60520c5), /* PORT197CR */ - PORTCR(198, 0xe60520c6), /* PORT198CR */ - PORTCR(199, 0xe60520c7), /* PORT199CR */ - - PORTCR(200, 0xe60520c8), /* PORT200CR */ - PORTCR(201, 0xe60520c9), /* PORT201CR */ - PORTCR(202, 0xe60520ca), /* PORT202CR */ - PORTCR(203, 0xe60520cb), /* PORT203CR */ - PORTCR(204, 0xe60520cc), /* PORT204CR */ - PORTCR(205, 0xe60520cd), /* PORT205CR */ - PORTCR(206, 0xe60520ce), /* PORT206CR */ - PORTCR(207, 0xe60520cf), /* PORT207CR */ - PORTCR(208, 0xe60520d0), /* PORT208CR */ - PORTCR(209, 0xe60520d1), /* PORT209CR */ - - PORTCR(210, 0xe60520d2), /* PORT210CR */ - PORTCR(211, 0xe60520d3), /* PORT211CR */ - PORTCR(212, 0xe60520d4), /* PORT212CR */ - PORTCR(213, 0xe60520d5), /* PORT213CR */ - PORTCR(214, 0xe60520d6), /* PORT214CR */ - PORTCR(215, 0xe60520d7), /* PORT215CR */ - PORTCR(216, 0xe60520d8), /* PORT216CR */ - PORTCR(217, 0xe60520d9), /* PORT217CR */ - PORTCR(218, 0xe60520da), /* PORT218CR */ - PORTCR(219, 0xe60520db), /* PORT219CR */ - - PORTCR(220, 0xe60520dc), /* PORT220CR */ - PORTCR(221, 0xe60520dd), /* PORT221CR */ - PORTCR(222, 0xe60520de), /* PORT222CR */ - PORTCR(223, 0xe60520df), /* PORT223CR */ - PORTCR(224, 0xe60520e0), /* PORT224CR */ - PORTCR(225, 0xe60520e1), /* PORT225CR */ - PORTCR(226, 0xe60520e2), /* PORT226CR */ - PORTCR(227, 0xe60520e3), /* PORT227CR */ - PORTCR(228, 0xe60520e4), /* PORT228CR */ - PORTCR(229, 0xe60520e5), /* PORT229CR */ - - PORTCR(230, 0xe60520e6), /* PORT230CR */ - PORTCR(231, 0xe60520e7), /* PORT231CR */ - PORTCR(232, 0xe60520e8), /* PORT232CR */ - PORTCR(233, 0xe60520e9), /* PORT233CR */ - PORTCR(234, 0xe60520ea), /* PORT234CR */ - PORTCR(235, 0xe60520eb), /* PORT235CR */ - PORTCR(236, 0xe60520ec), /* PORT236CR */ - PORTCR(237, 0xe60520ed), /* PORT237CR */ - PORTCR(238, 0xe60520ee), /* PORT238CR */ - PORTCR(239, 0xe60520ef), /* PORT239CR */ - - PORTCR(240, 0xe60520f0), /* PORT240CR */ - PORTCR(241, 0xe60520f1), /* PORT241CR */ - PORTCR(242, 0xe60520f2), /* PORT242CR */ - PORTCR(243, 0xe60520f3), /* PORT243CR */ - PORTCR(244, 0xe60520f4), /* PORT244CR */ - PORTCR(245, 0xe60520f5), /* PORT245CR */ - PORTCR(246, 0xe60520f6), /* PORT246CR */ - PORTCR(247, 0xe60520f7), /* PORT247CR */ - PORTCR(248, 0xe60520f8), /* PORT248CR */ - PORTCR(249, 0xe60520f9), /* PORT249CR */ - - PORTCR(250, 0xe60520fa), /* PORT250CR */ - PORTCR(251, 0xe60520fb), /* PORT251CR */ - PORTCR(252, 0xe60520fc), /* PORT252CR */ - PORTCR(253, 0xe60520fd), /* PORT253CR */ - PORTCR(254, 0xe60520fe), /* PORT254CR */ - PORTCR(255, 0xe60520ff), /* PORT255CR */ - PORTCR(256, 0xe6052100), /* PORT256CR */ - PORTCR(257, 0xe6052101), /* PORT257CR */ - PORTCR(258, 0xe6052102), /* PORT258CR */ - PORTCR(259, 0xe6052103), /* PORT259CR */ - - PORTCR(260, 0xe6052104), /* PORT260CR */ - PORTCR(261, 0xe6052105), /* PORT261CR */ - PORTCR(262, 0xe6052106), /* PORT262CR */ - PORTCR(263, 0xe6052107), /* PORT263CR */ - PORTCR(264, 0xe6052108), /* PORT264CR */ - - { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - MSELBCR_MSEL17_0, MSELBCR_MSEL17_1, - MSELBCR_MSEL16_0, MSELBCR_MSEL16_1, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { - PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, - PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, - PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, - PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, - PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, - PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, - PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, - PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } - }, - { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) { - PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, - PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, - PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, - PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, - PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, - PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, - PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, - PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } - }, - { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) { - PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, - PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, - PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, - PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, - PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, - PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, - PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, - PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } - }, - { PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, PORT118_DATA, PORT117_DATA, PORT116_DATA, - PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, - PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, - PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, - PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, - PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } - }, - { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) { - PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, - PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, - PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, - PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, - PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, - PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, - PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, - PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } - }, - { PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT164_DATA, - PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } - }, - { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) { - PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, - PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, - PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, - PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, - PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, - PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, - PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, - PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } - }, - { PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) { - PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, - PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, - PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, - PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, - PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, - PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, - PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, - PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } - }, - { PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT264_DATA, - PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, - PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } - }, - { }, -}; - -static struct pinmux_info sh7377_pinmux_info = { - .name = "sh7377_pfc", - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_PORT0, - .last_gpio = GPIO_FN_RESETOUTS, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), -}; - -void sh7377_pinmux_init(void) -{ - register_pinmux(&sh7377_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 96f11394c7c0..095222469d03 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -584,6 +584,21 @@ static struct platform_device i2c1_device = { .num_resources = ARRAY_SIZE(i2c1_resources), }; +static struct resource pmu_resources[] = { + [0] = { + .start = evt2irq(0x19a0), + .end = evt2irq(0x19a0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = -1, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + static struct platform_device *r8a7740_late_devices[] __initdata = { &i2c0_device, &i2c1_device, @@ -591,6 +606,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = { &dma1_device, &dma2_device, &usb_dma_device, + &pmu_device, }; /* @@ -741,7 +757,7 @@ static const char *r8a7740_boards_compat_dt[] __initdata = { NULL, }; -DT_MACHINE_START(SH7372_DT, "Generic R8A7740 (Flattened Device Tree)") +DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, .init_early = r8a7740_add_early_devices_dt, .init_irq = r8a7740_init_irq, diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index ebbffc25f24f..7a1ad4f38539 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -229,6 +229,79 @@ static struct platform_device tmu01_device = { .num_resources = ARRAY_SIZE(tmu01_resources), }; +/* I2C */ +static struct resource rcar_i2c0_res[] = { + { + .start = 0xffc70000, + .end = 0xffc70fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(79), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c0_device = { + .name = "i2c-rcar", + .id = 0, + .resource = rcar_i2c0_res, + .num_resources = ARRAY_SIZE(rcar_i2c0_res), +}; + +static struct resource rcar_i2c1_res[] = { + { + .start = 0xffc71000, + .end = 0xffc71fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(82), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c1_device = { + .name = "i2c-rcar", + .id = 1, + .resource = rcar_i2c1_res, + .num_resources = ARRAY_SIZE(rcar_i2c1_res), +}; + +static struct resource rcar_i2c2_res[] = { + { + .start = 0xffc72000, + .end = 0xffc72fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c2_device = { + .name = "i2c-rcar", + .id = 2, + .resource = rcar_i2c2_res, + .num_resources = ARRAY_SIZE(rcar_i2c2_res), +}; + +static struct resource rcar_i2c3_res[] = { + { + .start = 0xffc73000, + .end = 0xffc73fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(81), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c3_device = { + .name = "i2c-rcar", + .id = 3, + .resource = rcar_i2c3_res, + .num_resources = ARRAY_SIZE(rcar_i2c3_res), +}; + static struct platform_device *r8a7779_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -238,6 +311,10 @@ static struct platform_device *r8a7779_early_devices[] __initdata = { &scif5_device, &tmu00_device, &tmu01_device, + &i2c0_device, + &i2c1_device, + &i2c2_device, + &i2c3_device, }; static struct platform_device *r8a7779_late_devices[] __initdata = { diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c deleted file mode 100644 index e647f5410879..000000000000 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ /dev/null @@ -1,481 +0,0 @@ -/* - * sh7367 processor support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/uio_driver.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/serial_sci.h> -#include <linux/sh_timer.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -static struct map_desc sh7367_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -void __init sh7367_map_io(void) -{ - iotable_init(sh7367_io_desc, ARRAY_SIZE(sh7367_io_desc)); -} - -/* SCIFA0 */ -static struct plat_sci_port scif0_platform_data = { - .mapbase = 0xe6c40000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc00), evt2irq(0xc00), - evt2irq(0xc00), evt2irq(0xc00) }, -}; - -static struct platform_device scif0_device = { - .name = "sh-sci", - .id = 0, - .dev = { - .platform_data = &scif0_platform_data, - }, -}; - -/* SCIFA1 */ -static struct plat_sci_port scif1_platform_data = { - .mapbase = 0xe6c50000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc20), evt2irq(0xc20), - evt2irq(0xc20), evt2irq(0xc20) }, -}; - -static struct platform_device scif1_device = { - .name = "sh-sci", - .id = 1, - .dev = { - .platform_data = &scif1_platform_data, - }, -}; - -/* SCIFA2 */ -static struct plat_sci_port scif2_platform_data = { - .mapbase = 0xe6c60000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc40), evt2irq(0xc40), - evt2irq(0xc40), evt2irq(0xc40) }, -}; - -static struct platform_device scif2_device = { - .name = "sh-sci", - .id = 2, - .dev = { - .platform_data = &scif2_platform_data, - }, -}; - -/* SCIFA3 */ -static struct plat_sci_port scif3_platform_data = { - .mapbase = 0xe6c70000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc60), evt2irq(0xc60), - evt2irq(0xc60), evt2irq(0xc60) }, -}; - -static struct platform_device scif3_device = { - .name = "sh-sci", - .id = 3, - .dev = { - .platform_data = &scif3_platform_data, - }, -}; - -/* SCIFA4 */ -static struct plat_sci_port scif4_platform_data = { - .mapbase = 0xe6c80000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd20), evt2irq(0xd20), - evt2irq(0xd20), evt2irq(0xd20) }, -}; - -static struct platform_device scif4_device = { - .name = "sh-sci", - .id = 4, - .dev = { - .platform_data = &scif4_platform_data, - }, -}; - -/* SCIFA5 */ -static struct plat_sci_port scif5_platform_data = { - .mapbase = 0xe6cb0000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd40), evt2irq(0xd40), - evt2irq(0xd40), evt2irq(0xd40) }, -}; - -static struct platform_device scif5_device = { - .name = "sh-sci", - .id = 5, - .dev = { - .platform_data = &scif5_platform_data, - }, -}; - -/* SCIFB */ -static struct plat_sci_port scif6_platform_data = { - .mapbase = 0xe6c30000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFB, - .irqs = { evt2irq(0xd60), evt2irq(0xd60), - evt2irq(0xd60), evt2irq(0xd60) }, -}; - -static struct platform_device scif6_device = { - .name = "sh-sci", - .id = 6, - .dev = { - .platform_data = &scif6_platform_data, - }, -}; - -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 125, -}; - -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xb00), /* CMT1_CMT10 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, - .dev = { - .platform_data = &cmt10_platform_data, - }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), -}; - -/* VPU */ -static struct uio_info vpu_platform_data = { - .name = "VPU5", - .version = "0", - .irq = intcs_evt2irq(0x980), -}; - -static struct resource vpu_resources[] = { - [0] = { - .name = "VPU", - .start = 0xfe900000, - .end = 0xfe902807, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device vpu_device = { - .name = "uio_pdrv_genirq", - .id = 0, - .dev = { - .platform_data = &vpu_platform_data, - }, - .resource = vpu_resources, - .num_resources = ARRAY_SIZE(vpu_resources), -}; - -/* VEU0 */ -static struct uio_info veu0_platform_data = { - .name = "VEU0", - .version = "0", - .irq = intcs_evt2irq(0x700), -}; - -static struct resource veu0_resources[] = { - [0] = { - .name = "VEU0", - .start = 0xfe920000, - .end = 0xfe9200b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu0_device = { - .name = "uio_pdrv_genirq", - .id = 1, - .dev = { - .platform_data = &veu0_platform_data, - }, - .resource = veu0_resources, - .num_resources = ARRAY_SIZE(veu0_resources), -}; - -/* VEU1 */ -static struct uio_info veu1_platform_data = { - .name = "VEU1", - .version = "0", - .irq = intcs_evt2irq(0x720), -}; - -static struct resource veu1_resources[] = { - [0] = { - .name = "VEU1", - .start = 0xfe924000, - .end = 0xfe9240b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu1_device = { - .name = "uio_pdrv_genirq", - .id = 2, - .dev = { - .platform_data = &veu1_platform_data, - }, - .resource = veu1_resources, - .num_resources = ARRAY_SIZE(veu1_resources), -}; - -/* VEU2 */ -static struct uio_info veu2_platform_data = { - .name = "VEU2", - .version = "0", - .irq = intcs_evt2irq(0x740), -}; - -static struct resource veu2_resources[] = { - [0] = { - .name = "VEU2", - .start = 0xfe928000, - .end = 0xfe9280b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2_device = { - .name = "uio_pdrv_genirq", - .id = 3, - .dev = { - .platform_data = &veu2_platform_data, - }, - .resource = veu2_resources, - .num_resources = ARRAY_SIZE(veu2_resources), -}; - -/* VEU3 */ -static struct uio_info veu3_platform_data = { - .name = "VEU3", - .version = "0", - .irq = intcs_evt2irq(0x760), -}; - -static struct resource veu3_resources[] = { - [0] = { - .name = "VEU3", - .start = 0xfe92c000, - .end = 0xfe92c0b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu3_device = { - .name = "uio_pdrv_genirq", - .id = 4, - .dev = { - .platform_data = &veu3_platform_data, - }, - .resource = veu3_resources, - .num_resources = ARRAY_SIZE(veu3_resources), -}; - -/* VEU2H */ -static struct uio_info veu2h_platform_data = { - .name = "VEU2H", - .version = "0", - .irq = intcs_evt2irq(0x520), -}; - -static struct resource veu2h_resources[] = { - [0] = { - .name = "VEU2H", - .start = 0xfe93c000, - .end = 0xfe93c27b, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2h_device = { - .name = "uio_pdrv_genirq", - .id = 5, - .dev = { - .platform_data = &veu2h_platform_data, - }, - .resource = veu2h_resources, - .num_resources = ARRAY_SIZE(veu2h_resources), -}; - -/* JPU */ -static struct uio_info jpu_platform_data = { - .name = "JPU", - .version = "0", - .irq = intcs_evt2irq(0x560), -}; - -static struct resource jpu_resources[] = { - [0] = { - .name = "JPU", - .start = 0xfe980000, - .end = 0xfe9902d3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device jpu_device = { - .name = "uio_pdrv_genirq", - .id = 6, - .dev = { - .platform_data = &jpu_platform_data, - }, - .resource = jpu_resources, - .num_resources = ARRAY_SIZE(jpu_resources), -}; - -/* SPU1 */ -static struct uio_info spu1_platform_data = { - .name = "SPU1", - .version = "0", - .irq = evt2irq(0xfc0), -}; - -static struct resource spu1_resources[] = { - [0] = { - .name = "SPU1", - .start = 0xfe300000, - .end = 0xfe3fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu1_device = { - .name = "uio_pdrv_genirq", - .id = 7, - .dev = { - .platform_data = &spu1_platform_data, - }, - .resource = spu1_resources, - .num_resources = ARRAY_SIZE(spu1_resources), -}; - -static struct platform_device *sh7367_early_devices[] __initdata = { - &scif0_device, - &scif1_device, - &scif2_device, - &scif3_device, - &scif4_device, - &scif5_device, - &scif6_device, - &cmt10_device, -}; - -static struct platform_device *sh7367_devices[] __initdata = { - &vpu_device, - &veu0_device, - &veu1_device, - &veu2_device, - &veu3_device, - &veu2h_device, - &jpu_device, - &spu1_device, -}; - -void __init sh7367_add_standard_devices(void) -{ - platform_add_devices(sh7367_early_devices, - ARRAY_SIZE(sh7367_early_devices)); - - platform_add_devices(sh7367_devices, - ARRAY_SIZE(sh7367_devices)); -} - -static void __init sh7367_earlytimer_init(void) -{ - sh7367_clock_init(); - shmobile_earlytimer_init(); -} - -#define SYMSTPCR2 IOMEM(0xe6158048) -#define SYMSTPCR2_CMT1 (1 << 29) - -void __init sh7367_add_early_devices(void) -{ - /* enable clock to CMT1 */ - __raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2); - - early_platform_add_devices(sh7367_early_devices, - ARRAY_SIZE(sh7367_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); - - /* override timer setup with soc-specific code */ - shmobile_timer.init = sh7367_earlytimer_init; -} diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index be6f746c97fa..c917882424a7 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -402,6 +402,26 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x3e, }, { + .slave_id = SHDMA_SLAVE_FLCTL0_TX, + .addr = 0xe6a30050, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0x83, + }, { + .slave_id = SHDMA_SLAVE_FLCTL0_RX, + .addr = 0xe6a30050, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x83, + }, { + .slave_id = SHDMA_SLAVE_FLCTL1_TX, + .addr = 0xe6a30060, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0x87, + }, { + .slave_id = SHDMA_SLAVE_FLCTL1_RX, + .addr = 0xe6a30060, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x87, + }, { .slave_id = SHDMA_SLAVE_SDHI0_TX, .addr = 0xe6850030, .chcr = CHCR_TX(XMIT_SZ_16BIT), diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c deleted file mode 100644 index edcf98bb7012..000000000000 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * sh7377 processor support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/of_platform.h> -#include <linux/uio_driver.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/serial_sci.h> -#include <linux/sh_intc.h> -#include <linux/sh_timer.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <asm/mach/map.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -static struct map_desc sh7377_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -void __init sh7377_map_io(void) -{ - iotable_init(sh7377_io_desc, ARRAY_SIZE(sh7377_io_desc)); -} - -/* SCIFA0 */ -static struct plat_sci_port scif0_platform_data = { - .mapbase = 0xe6c40000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc00), evt2irq(0xc00), - evt2irq(0xc00), evt2irq(0xc00) }, -}; - -static struct platform_device scif0_device = { - .name = "sh-sci", - .id = 0, - .dev = { - .platform_data = &scif0_platform_data, - }, -}; - -/* SCIFA1 */ -static struct plat_sci_port scif1_platform_data = { - .mapbase = 0xe6c50000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc20), evt2irq(0xc20), - evt2irq(0xc20), evt2irq(0xc20) }, -}; - -static struct platform_device scif1_device = { - .name = "sh-sci", - .id = 1, - .dev = { - .platform_data = &scif1_platform_data, - }, -}; - -/* SCIFA2 */ -static struct plat_sci_port scif2_platform_data = { - .mapbase = 0xe6c60000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc40), evt2irq(0xc40), - evt2irq(0xc40), evt2irq(0xc40) }, -}; - -static struct platform_device scif2_device = { - .name = "sh-sci", - .id = 2, - .dev = { - .platform_data = &scif2_platform_data, - }, -}; - -/* SCIFA3 */ -static struct plat_sci_port scif3_platform_data = { - .mapbase = 0xe6c70000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc60), evt2irq(0xc60), - evt2irq(0xc60), evt2irq(0xc60) }, -}; - -static struct platform_device scif3_device = { - .name = "sh-sci", - .id = 3, - .dev = { - .platform_data = &scif3_platform_data, - }, -}; - -/* SCIFA4 */ -static struct plat_sci_port scif4_platform_data = { - .mapbase = 0xe6c80000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd20), evt2irq(0xd20), - evt2irq(0xd20), evt2irq(0xd20) }, -}; - -static struct platform_device scif4_device = { - .name = "sh-sci", - .id = 4, - .dev = { - .platform_data = &scif4_platform_data, - }, -}; - -/* SCIFA5 */ -static struct plat_sci_port scif5_platform_data = { - .mapbase = 0xe6cb0000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd40), evt2irq(0xd40), - evt2irq(0xd40), evt2irq(0xd40) }, -}; - -static struct platform_device scif5_device = { - .name = "sh-sci", - .id = 5, - .dev = { - .platform_data = &scif5_platform_data, - }, -}; - -/* SCIFA6 */ -static struct plat_sci_port scif6_platform_data = { - .mapbase = 0xe6cc0000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80), - intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80) }, -}; - -static struct platform_device scif6_device = { - .name = "sh-sci", - .id = 6, - .dev = { - .platform_data = &scif6_platform_data, - }, -}; - -/* SCIFB */ -static struct plat_sci_port scif7_platform_data = { - .mapbase = 0xe6c30000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFB, - .irqs = { evt2irq(0xd60), evt2irq(0xd60), - evt2irq(0xd60), evt2irq(0xd60) }, -}; - -static struct platform_device scif7_device = { - .name = "sh-sci", - .id = 7, - .dev = { - .platform_data = &scif7_platform_data, - }, -}; - -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 125, -}; - -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xb00), /* CMT1_CMT10 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, - .dev = { - .platform_data = &cmt10_platform_data, - }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), -}; - -/* VPU */ -static struct uio_info vpu_platform_data = { - .name = "VPU5HG", - .version = "0", - .irq = intcs_evt2irq(0x980), -}; - -static struct resource vpu_resources[] = { - [0] = { - .name = "VPU", - .start = 0xfe900000, - .end = 0xfe900157, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device vpu_device = { - .name = "uio_pdrv_genirq", - .id = 0, - .dev = { - .platform_data = &vpu_platform_data, - }, - .resource = vpu_resources, - .num_resources = ARRAY_SIZE(vpu_resources), -}; - -/* VEU0 */ -static struct uio_info veu0_platform_data = { - .name = "VEU0", - .version = "0", - .irq = intcs_evt2irq(0x700), -}; - -static struct resource veu0_resources[] = { - [0] = { - .name = "VEU0", - .start = 0xfe920000, - .end = 0xfe9200cb, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu0_device = { - .name = "uio_pdrv_genirq", - .id = 1, - .dev = { - .platform_data = &veu0_platform_data, - }, - .resource = veu0_resources, - .num_resources = ARRAY_SIZE(veu0_resources), -}; - -/* VEU1 */ -static struct uio_info veu1_platform_data = { - .name = "VEU1", - .version = "0", - .irq = intcs_evt2irq(0x720), -}; - -static struct resource veu1_resources[] = { - [0] = { - .name = "VEU1", - .start = 0xfe924000, - .end = 0xfe9240cb, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu1_device = { - .name = "uio_pdrv_genirq", - .id = 2, - .dev = { - .platform_data = &veu1_platform_data, - }, - .resource = veu1_resources, - .num_resources = ARRAY_SIZE(veu1_resources), -}; - -/* VEU2 */ -static struct uio_info veu2_platform_data = { - .name = "VEU2", - .version = "0", - .irq = intcs_evt2irq(0x740), -}; - -static struct resource veu2_resources[] = { - [0] = { - .name = "VEU2", - .start = 0xfe928000, - .end = 0xfe928307, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2_device = { - .name = "uio_pdrv_genirq", - .id = 3, - .dev = { - .platform_data = &veu2_platform_data, - }, - .resource = veu2_resources, - .num_resources = ARRAY_SIZE(veu2_resources), -}; - -/* VEU3 */ -static struct uio_info veu3_platform_data = { - .name = "VEU3", - .version = "0", - .irq = intcs_evt2irq(0x760), -}; - -static struct resource veu3_resources[] = { - [0] = { - .name = "VEU3", - .start = 0xfe92c000, - .end = 0xfe92c307, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu3_device = { - .name = "uio_pdrv_genirq", - .id = 4, - .dev = { - .platform_data = &veu3_platform_data, - }, - .resource = veu3_resources, - .num_resources = ARRAY_SIZE(veu3_resources), -}; - -/* JPU */ -static struct uio_info jpu_platform_data = { - .name = "JPU", - .version = "0", - .irq = intcs_evt2irq(0x560), -}; - -static struct resource jpu_resources[] = { - [0] = { - .name = "JPU", - .start = 0xfe980000, - .end = 0xfe9902d3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device jpu_device = { - .name = "uio_pdrv_genirq", - .id = 5, - .dev = { - .platform_data = &jpu_platform_data, - }, - .resource = jpu_resources, - .num_resources = ARRAY_SIZE(jpu_resources), -}; - -/* SPU2DSP0 */ -static struct uio_info spu0_platform_data = { - .name = "SPU2DSP0", - .version = "0", - .irq = evt2irq(0x1800), -}; - -static struct resource spu0_resources[] = { - [0] = { - .name = "SPU2DSP0", - .start = 0xfe200000, - .end = 0xfe2fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu0_device = { - .name = "uio_pdrv_genirq", - .id = 6, - .dev = { - .platform_data = &spu0_platform_data, - }, - .resource = spu0_resources, - .num_resources = ARRAY_SIZE(spu0_resources), -}; - -/* SPU2DSP1 */ -static struct uio_info spu1_platform_data = { - .name = "SPU2DSP1", - .version = "0", - .irq = evt2irq(0x1820), -}; - -static struct resource spu1_resources[] = { - [0] = { - .name = "SPU2DSP1", - .start = 0xfe300000, - .end = 0xfe3fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu1_device = { - .name = "uio_pdrv_genirq", - .id = 7, - .dev = { - .platform_data = &spu1_platform_data, - }, - .resource = spu1_resources, - .num_resources = ARRAY_SIZE(spu1_resources), -}; - -static struct platform_device *sh7377_early_devices[] __initdata = { - &scif0_device, - &scif1_device, - &scif2_device, - &scif3_device, - &scif4_device, - &scif5_device, - &scif6_device, - &scif7_device, - &cmt10_device, -}; - -static struct platform_device *sh7377_devices[] __initdata = { - &vpu_device, - &veu0_device, - &veu1_device, - &veu2_device, - &veu3_device, - &jpu_device, - &spu0_device, - &spu1_device, -}; - -void __init sh7377_add_standard_devices(void) -{ - platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - platform_add_devices(sh7377_devices, - ARRAY_SIZE(sh7377_devices)); -} - -static void __init sh7377_earlytimer_init(void) -{ - sh7377_clock_init(); - shmobile_earlytimer_init(); -} - -#define SMSTPCR3 IOMEM(0xe615013c) -#define SMSTPCR3_CMT1 (1 << 29) - -void __init sh7377_add_early_devices(void) -{ - /* enable clock to CMT1 */ - __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3); - - early_platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); - - /* override timer setup with soc-specific code */ - shmobile_timer.init = sh7377_earlytimer_init; -} - -#ifdef CONFIG_USE_OF - -void __init sh7377_add_early_devices_dt(void) -{ - shmobile_setup_delay(600, 1, 3); /* Cortex-A8 @ 600MHz */ - - early_platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - -static const struct of_dev_auxdata sh7377_auxdata_lookup[] __initconst = { - { } -}; - -void __init sh7377_add_standard_devices_dt(void) -{ - /* clocks are setup late during boot in the case of DT */ - sh7377_clock_init(); - - platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - of_platform_populate(NULL, of_default_bus_match_table, - sh7377_auxdata_lookup, NULL); -} - -static const char *sh7377_boards_compat_dt[] __initdata = { - "renesas,sh7377", - NULL, -}; - -DT_MACHINE_START(SH7377_DT, "Generic SH7377 (Flattened Device Tree)") - .map_io = sh7377_map_io, - .init_early = sh7377_add_early_devices_dt, - .init_irq = sh7377_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = sh7377_add_standard_devices_dt, - .timer = &shmobile_timer, - .dt_compat = sh7377_boards_compat_dt, -MACHINE_END - -#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index f67456286280..535426c306bd 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -32,24 +32,8 @@ #define EMEV2_SCU_BASE 0x1e000000 -static DEFINE_SPINLOCK(scu_lock); static void __iomem *scu_base; -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - unsigned long tmp; - - /* we assume this code is running on a different cpu - * than the one that is changing coherency setting */ - spin_lock(&scu_lock); - tmp = readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - writel(tmp, scu_base + 8); - spin_unlock(&scu_lock); - -} - static unsigned int __init emev2_get_core_count(void) { if (!scu_base) { @@ -95,7 +79,7 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct * cpu = cpu_logical_map(cpu); /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base, 0); /* Tell ROM loader about our vector (in headsmp.S) */ emev2_set_boot_vector(__pa(shmobile_secondary_vector)); @@ -106,12 +90,10 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct * static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base, 0); } static void __init emev2_smp_init_cpus(void) diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 2ce6af9a6a37..9def0f22bf22 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -61,9 +61,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0xf0000000; } -static DEFINE_SPINLOCK(scu_lock); -static unsigned long tmp; - #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); @@ -73,20 +70,6 @@ void __init r8a7779_register_twd(void) } #endif -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - void __iomem *scu_base = scu_base_addr(); - - spin_lock(&scu_lock); - tmp = __raw_readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - spin_unlock(&scu_lock); - - /* disable cache coherency after releasing the lock */ - __raw_writel(tmp, scu_base + 8); -} - static unsigned int __init r8a7779_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); @@ -102,7 +85,7 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) cpu = cpu_logical_map(cpu); /* disable cache coherency */ - modify_scu_cpu_psr(3 << (cpu * 8), 0); + scu_power_mode(scu_base_addr(), 3); if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -145,7 +128,7 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct cpu = cpu_logical_map(cpu); /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -158,15 +141,13 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ __raw_writel(__pa(shmobile_secondary_vector), AVECR); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); r8a7779_pm_init(); diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 624f00f70abf..96ddb97babbe 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -41,9 +41,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0xf0000000; } -static DEFINE_SPINLOCK(scu_lock); -static unsigned long tmp; - #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); void __init sh73a0_register_twd(void) @@ -52,20 +49,6 @@ void __init sh73a0_register_twd(void) } #endif -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - void __iomem *scu_base = scu_base_addr(); - - spin_lock(&scu_lock); - tmp = __raw_readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - spin_unlock(&scu_lock); - - /* disable cache coherency after releasing the lock */ - __raw_writel(tmp, scu_base + 8); -} - static unsigned int __init sh73a0_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); @@ -83,7 +66,7 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct cpu = cpu_logical_map(cpu); /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, WUPCR); /* wake up */ @@ -95,8 +78,6 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ @@ -104,7 +85,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(__pa(shmobile_secondary_vector), SBAR); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); } static void __init sh73a0_smp_init_cpus(void) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig new file mode 100644 index 000000000000..3fdd0085e306 --- /dev/null +++ b/arch/arm/mach-sunxi/Kconfig @@ -0,0 +1,9 @@ +config ARCH_SUNXI + bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select PINCTRL + select SPARSE_IRQ + select SUNXI_TIMER diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile new file mode 100644 index 000000000000..93bebfc3ff9f --- /dev/null +++ b/arch/arm/mach-sunxi/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_SUNXI) += sunxi.o diff --git a/arch/arm/mach-sunxi/Makefile.boot b/arch/arm/mach-sunxi/Makefile.boot new file mode 100644 index 000000000000..46d4cf0841c0 --- /dev/null +++ b/arch/arm/mach-sunxi/Makefile.boot @@ -0,0 +1 @@ +zreladdr-$(CONFIG_ARCH_SUNXI) += 0x40008000 diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c new file mode 100644 index 000000000000..9be910f7920b --- /dev/null +++ b/arch/arm/mach-sunxi/sunxi.c @@ -0,0 +1,96 @@ +/* + * Device Tree support for Allwinner A1X SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/sunxi_timer.h> + +#include <linux/irqchip/sunxi.h> + +#include <asm/hardware/vic.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "sunxi.h" + +#define WATCHDOG_CTRL_REG 0x00 +#define WATCHDOG_MODE_REG 0x04 + +static void __iomem *wdt_base; + +static void sunxi_setup_restart(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "allwinner,sunxi-wdt"); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_base = of_iomap(np, 0); + WARN(!wdt_base, "failed to map watchdog base address"); +} + +static void sunxi_restart(char mode, const char *cmd) +{ + if (!wdt_base) + return; + + /* Enable timer and set reset bit in the watchdog */ + writel(3, wdt_base + WATCHDOG_MODE_REG); + writel(0xa57 << 1 | 1, wdt_base + WATCHDOG_CTRL_REG); + while(1) { + mdelay(5); + writel(3, wdt_base + WATCHDOG_MODE_REG); + } +} + +static struct map_desc sunxi_io_desc[] __initdata = { + { + .virtual = (unsigned long) SUNXI_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(SUNXI_REGS_PHYS_BASE), + .length = SUNXI_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init sunxi_map_io(void) +{ + iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc)); +} + +static void __init sunxi_dt_init(void) +{ + sunxi_setup_restart(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const sunxi_board_dt_compat[] = { + "allwinner,sun4i", + "allwinner,sun5i", + NULL, +}; + +DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") + .init_machine = sunxi_dt_init, + .map_io = sunxi_map_io, + .init_irq = sunxi_init_irq, + .handle_irq = sunxi_handle_irq, + .restart = sunxi_restart, + .timer = &sunxi_timer, + .dt_compat = sunxi_board_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-sunxi/sunxi.h b/arch/arm/mach-sunxi/sunxi.h new file mode 100644 index 000000000000..33b58712adea --- /dev/null +++ b/arch/arm/mach-sunxi/sunxi.h @@ -0,0 +1,20 @@ +/* + * Generic definitions for Allwinner SunXi SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SUNXI_H +#define __MACH_SUNXI_H + +#define SUNXI_REGS_PHYS_BASE 0x01c00000 +#define SUNXI_REGS_VIRT_BASE IOMEM(0xf1c00000) +#define SUNXI_REGS_SIZE (SZ_2M + SZ_1M) + +#endif /* __MACH_SUNXI_H */ diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 9ff6f6ea3617..e426d1b7747e 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -57,57 +57,6 @@ config TEGRA_AHB which controls AHB bus master arbitration and some perfomance parameters(priority, prefech size). -choice - prompt "Default low-level debug console UART" - default TEGRA_DEBUG_UART_NONE - -config TEGRA_DEBUG_UART_NONE - bool "None" - -config TEGRA_DEBUG_UARTA - bool "UART-A" - -config TEGRA_DEBUG_UARTB - bool "UART-B" - -config TEGRA_DEBUG_UARTC - bool "UART-C" - -config TEGRA_DEBUG_UARTD - bool "UART-D" - -config TEGRA_DEBUG_UARTE - bool "UART-E" - -endchoice - -choice - prompt "Automatic low-level debug console UART" - default TEGRA_DEBUG_UART_AUTO_NONE - -config TEGRA_DEBUG_UART_AUTO_NONE - bool "None" - -config TEGRA_DEBUG_UART_AUTO_ODMDATA - bool "Via ODMDATA" - help - Automatically determines which UART to use for low-level debug based - on the ODMDATA value. This value is part of the BCT, and is written - to the boot memory device using nvflash, or other flashing tool. - When bits 19:18 are 3, then bits 17:15 indicate which UART to use; - 0/1/2/3/4 are UART A/B/C/D/E. - -config TEGRA_DEBUG_UART_AUTO_SCRATCH - bool "Via UART scratch register" - help - Automatically determines which UART to use for low-level debug based - on the UART scratch register value. Some bootloaders put ASCII 'D' - in this register when they initialize their own console UART output. - Using this option allows the kernel to automatically pick the same - UART. - -endchoice - config TEGRA_EMC_SCALING_ENABLE bool "Enable scaling the memory frequency" diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 6cc23cc83509..0979e8bba78a 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -8,17 +8,24 @@ obj-y += pmc.o obj-y += flowctrl.o obj-y += powergate.o obj-y += apbio.o +obj-y += pm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-t20.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o +endif obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-t30.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o +endif obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 3e03e5f15c14..0816562725f6 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -36,6 +36,7 @@ #include "pmc.h" #include "apbio.h" #include "sleep.h" +#include "pm.h" /* * Storage for debug-macro.S's state. @@ -44,14 +45,15 @@ * kernel is loaded. The data is declared here rather than debug-macro.S so * that multiple inclusions of debug-macro.S point at the same data. */ -#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF) -u32 tegra_uart_config[3] = { +u32 tegra_uart_config[4] = { /* Debug UART initialization required */ 1, /* Debug UART physical address */ - (u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET), + 0, /* Debug UART virtual address */ - (u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET), + 0, + /* Scratch space for debug macro */ + 0, }; #ifdef CONFIG_OF @@ -108,6 +110,7 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { { "sclk", "pll_p_out4", 102000000, true }, { "hclk", "sclk", 102000000, true }, { "pclk", "hclk", 51000000, true }, + { "csite", NULL, 0, true }, { NULL, NULL, 0, 0}, }; #endif @@ -116,6 +119,7 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 + int ret; void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; @@ -123,7 +127,9 @@ static void __init tegra_init_cache(void) aux_ctrl = (cache_type & 0x700) << (17-8); aux_ctrl |= 0x7C400001; - l2x0_of_init(aux_ctrl, 0x8200c3fe); + ret = l2x0_of_init(aux_ctrl, 0x8200c3fe); + if (!ret) + l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs); #endif } diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c new file mode 100644 index 000000000000..d32e8b0dbd4f --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -0,0 +1,66 @@ +/* + * CPU idle driver for Tegra CPUs + * + * Copyright (c) 2010-2012, NVIDIA Corporation. + * Copyright (c) 2011 Google, Inc. + * Author: Colin Cross <ccross@android.com> + * Gary King <gking@nvidia.com> + * + * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/cpuidle.h> + +#include <asm/cpuidle.h> + +static struct cpuidle_driver tegra_idle_driver = { + .name = "tegra_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .state_count = 1, + .states = { + [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); + +int __init tegra20_cpuidle_init(void) +{ + int ret; + unsigned int cpu; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &tegra_idle_driver; + + ret = cpuidle_register_driver(&tegra_idle_driver); + if (ret) { + pr_err("CPUidle driver registration failed\n"); + return ret; + } + + for_each_possible_cpu(cpu) { + dev = &per_cpu(tegra_idle_device, cpu); + dev->cpu = cpu; + + dev->state_count = drv->state_count; + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("CPU%u: CPUidle device registration failed\n", + cpu); + return ret; + } + } + return 0; +} diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c new file mode 100644 index 000000000000..5e8cbf5b799f --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -0,0 +1,188 @@ +/* + * CPU idle driver for Tegra CPUs + * + * Copyright (c) 2010-2012, NVIDIA Corporation. + * Copyright (c) 2011 Google, Inc. + * Author: Colin Cross <ccross@android.com> + * Gary King <gking@nvidia.com> + * + * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/clockchips.h> + +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> +#include <asm/smp_plat.h> + +#include "pm.h" +#include "sleep.h" +#include "tegra_cpu_car.h" + +#ifdef CONFIG_PM_SLEEP +static int tegra30_idle_lp2(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index); +#endif + +static struct cpuidle_driver tegra_idle_driver = { + .name = "tegra_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, +#ifdef CONFIG_PM_SLEEP + .state_count = 2, +#else + .state_count = 1, +#endif + .states = { + [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), +#ifdef CONFIG_PM_SLEEP + [1] = { + .enter = tegra30_idle_lp2, + .exit_latency = 2000, + .target_residency = 2200, + .power_usage = 0, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "powered-down", + .desc = "CPU power gated", + }, +#endif + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); + +#ifdef CONFIG_PM_SLEEP +static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct cpuidle_state *state = &drv->states[index]; + u32 cpu_on_time = state->exit_latency; + u32 cpu_off_time = state->target_residency - state->exit_latency; + + /* All CPUs entering LP2 is not working. + * Don't let CPU0 enter LP2 when any secondary CPU is online. + */ + if (num_online_cpus() > 1 || !tegra_cpu_rail_off_ready()) { + cpu_do_idle(); + return false; + } + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + return true; +} + +#ifdef CONFIG_SMP +static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + smp_wmb(); + + save_cpu_arch_register(); + + cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); + + restore_cpu_arch_register(); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + return true; +} +#else +static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + return true; +} +#endif + +static int __cpuinit tegra30_idle_lp2(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu; + bool entered_lp2 = false; + bool last_cpu; + + local_fiq_disable(); + + last_cpu = tegra_set_cpu_in_lp2(cpu); + cpu_pm_enter(); + + if (cpu == 0) { + if (last_cpu) + entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv, + index); + else + cpu_do_idle(); + } else { + entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index); + } + + cpu_pm_exit(); + tegra_clear_cpu_in_lp2(cpu); + + local_fiq_enable(); + + smp_rmb(); + + return (entered_lp2) ? index : 0; +} +#endif + +int __init tegra30_cpuidle_init(void) +{ + int ret; + unsigned int cpu; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &tegra_idle_driver; + +#ifdef CONFIG_PM_SLEEP + tegra_tear_down_cpu = tegra30_tear_down_cpu; +#endif + + ret = cpuidle_register_driver(&tegra_idle_driver); + if (ret) { + pr_err("CPUidle driver registration failed\n"); + return ret; + } + + for_each_possible_cpu(cpu) { + dev = &per_cpu(tegra_idle_device, cpu); + dev->cpu = cpu; + + dev->state_count = drv->state_count; + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("CPU%u: CPUidle device registration failed\n", + cpu); + return ret; + } + } + return 0; +} diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index 9a6f051b382e..d0651397aec7 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -23,83 +23,26 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/cpu.h> -#include <linux/cpuidle.h> -#include <linux/hrtimer.h> -#include <asm/proc-fns.h> - -static int tegra_idle_enter_lp3(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index); - -struct cpuidle_driver tegra_idle_driver = { - .name = "tegra_idle", - .owner = THIS_MODULE, - .state_count = 1, - .states = { - [0] = { - .enter = tegra_idle_enter_lp3, - .exit_latency = 10, - .target_residency = 10, - .power_usage = 600, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "LP3", - .desc = "CPU flow-controlled", - }, - }, -}; - -static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); - -static int tegra_idle_enter_lp3(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - ktime_t enter, exit; - s64 us; - - local_irq_disable(); - local_fiq_disable(); - - enter = ktime_get(); - - cpu_do_idle(); - - exit = ktime_sub(ktime_get(), enter); - us = ktime_to_us(exit); - - local_fiq_enable(); - local_irq_enable(); - - dev->last_residency = us; - - return index; -} +#include "fuse.h" +#include "cpuidle.h" static int __init tegra_cpuidle_init(void) { int ret; - unsigned int cpu; - struct cpuidle_device *dev; - struct cpuidle_driver *drv = &tegra_idle_driver; - ret = cpuidle_register_driver(&tegra_idle_driver); - if (ret) { - pr_err("CPUidle driver registration failed\n"); - return ret; + switch (tegra_chip_id) { + case TEGRA20: + ret = tegra20_cpuidle_init(); + break; + case TEGRA30: + ret = tegra30_cpuidle_init(); + break; + default: + ret = -ENODEV; + break; } - for_each_possible_cpu(cpu) { - dev = &per_cpu(tegra_idle_device, cpu); - dev->cpu = cpu; - - dev->state_count = drv->state_count; - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("CPU%u: CPUidle device registration failed\n", - cpu); - return ret; - } - } - return 0; + return ret; } device_initcall(tegra_cpuidle_init); diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h new file mode 100644 index 000000000000..496204d34e55 --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle.h @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __MACH_TEGRA_CPUIDLE_H +#define __MACH_TEGRA_CPUIDLE_H + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +int tegra20_cpuidle_init(void); +#else +static inline int tegra20_cpuidle_init(void) { return -ENODEV; } +#endif + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +int tegra30_cpuidle_init(void); +#else +static inline int tegra30_cpuidle_init(void) { return -ENODEV; } +#endif + +#endif diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index ffaa286a71e1..a2250ddae797 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/io.h> +#include <linux/cpumask.h> #include "flowctrl.h" #include "iomap.h" @@ -50,6 +51,14 @@ static void flowctrl_update(u8 offset, u32 value) readl_relaxed(addr); } +u32 flowctrl_read_cpu_csr(unsigned int cpuid) +{ + u8 offset = flowctrl_offset_cpu_csr[cpuid]; + void __iomem *addr = IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + offset; + + return readl(addr); +} + void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value) { return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value); @@ -59,3 +68,41 @@ void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value) { return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value); } + +void flowctrl_cpu_suspend_enter(unsigned int cpuid) +{ + unsigned int reg; + int i; + + reg = flowctrl_read_cpu_csr(cpuid); + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr flag */ + reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event flag */ + reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; /* pwr gating on wfi */ + reg |= FLOW_CTRL_CSR_ENABLE; /* pwr gating */ + flowctrl_write_cpu_csr(cpuid, reg); + + for (i = 0; i < num_possible_cpus(); i++) { + if (i == cpuid) + continue; + reg = flowctrl_read_cpu_csr(i); + reg |= FLOW_CTRL_CSR_EVENT_FLAG; + reg |= FLOW_CTRL_CSR_INTR_FLAG; + flowctrl_write_cpu_csr(i, reg); + } +} + +void flowctrl_cpu_suspend_exit(unsigned int cpuid) +{ + unsigned int reg; + + /* Disable powergating via flow controller for CPU0 */ + reg = flowctrl_read_cpu_csr(cpuid); + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + reg &= ~FLOW_CTRL_CSR_ENABLE; /* clear enable */ + reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr */ + reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event */ + flowctrl_write_cpu_csr(cpuid, reg); +} diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index 19428173855e..0798dec1832d 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -34,9 +34,17 @@ #define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 #define FLOW_CTRL_CPU1_CSR 0x18 +#define TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 (1 << 8) +#define TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP (0xF << 4) +#define TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP (0xF << 8) + #ifndef __ASSEMBLY__ +u32 flowctrl_read_cpu_csr(unsigned int cpuid); void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value); void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value); + +void flowctrl_cpu_suspend_enter(unsigned int cpuid); +void flowctrl_cpu_suspend_exit(unsigned int cpuid); #endif #endif diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index 93f0370cc95b..4a317fae6860 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -2,6 +2,8 @@ #include <linux/init.h> #include <asm/cache.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> #include "flowctrl.h" #include "iomap.h" @@ -68,6 +70,64 @@ ENTRY(tegra_secondary_startup) b secondary_startup ENDPROC(tegra_secondary_startup) +#ifdef CONFIG_PM_SLEEP +/* + * tegra_resume + * + * CPU boot vector when restarting the a CPU following + * an LP2 transition. Also branched to by LP0 and LP1 resume after + * re-enabling sdram. + */ +ENTRY(tegra_resume) + bl v7_invalidate_l1 + /* Enable coresight */ + mov32 r0, 0xC5ACCE55 + mcr p14, 0, r0, c7, c12, 6 + + cpu_id r0 + cmp r0, #0 @ CPU0? + bne cpu_resume @ no + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + beq 1f @ Yes + /* Clear the flow controller flags for this CPU. */ + mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR + ldr r1, [r2] + /* Clear event & intr flag */ + orr r1, r1, \ + #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps + bic r1, r1, r0 + str r1, [r2] +1: +#endif + +#ifdef CONFIG_HAVE_ARM_SCU + /* enable SCU */ + mov32 r0, TEGRA_ARM_PERIF_BASE + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] +#endif + + /* L2 cache resume & re-enable */ + l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr + + b cpu_resume +ENDPROC(tegra_resume) +#endif + +#ifdef CONFIG_CACHE_L2X0 + .globl l2x0_saved_regs_addr +l2x0_saved_regs_addr: + .long 0 +#endif + .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_start) @@ -121,6 +181,17 @@ ENTRY(__tegra_cpu_reset_handler) 1: #endif + /* Waking up from LP2? */ + ldr r9, [r12, #RESET_DATA(MASK_LP2)] + tst r9, r11 @ if in_lp2 + beq __is_not_lp2 + ldr lr, [r12, #RESET_DATA(STARTUP_LP2)] + cmp lr, #0 + bleq __die @ no LP2 startup handler + bx lr + +__is_not_lp2: + #ifdef CONFIG_SMP /* * Can only be secondary boot (initial or hotplug) but CPU 0 diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S deleted file mode 100644 index 44ca7b1d8b8a..000000000000 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ /dev/null @@ -1,100 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/debug-macro.S - * - * Copyright (C) 2010,2011 Google, Inc. - * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * Doug Anderson <dianders@chromium.org> - * Stephen Warren <swarren@nvidia.com> - * - * Portions based on mach-omap2's debug-macro.S - * Copyright (C) 1994-1999 Russell King - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/serial_reg.h> - -#include "../../iomap.h" -#include "../../irammap.h" - - .macro addruart, rp, rv, tmp - adr \rp, 99f @ actual addr of 99f - ldr \rv, [\rp] @ linked addr is stored there - sub \rv, \rv, \rp @ offset between the two - ldr \rp, [\rp, #4] @ linked tegra_uart_config - sub \tmp, \rp, \rv @ actual tegra_uart_config - ldr \rp, [\tmp] @ Load tegra_uart_config - cmp \rp, #1 @ needs intitialization? - bne 100f @ no; go load the addresses - mov \rv, #0 @ yes; record init is done - str \rv, [\tmp] - mov \rp, #TEGRA_IRAM_BASE @ See if cookie is in IRAM - ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET] - movw \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff - movt \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16 - cmp \rv, \rp @ Cookie present? - bne 100f @ No, use default UART - mov \rp, #TEGRA_IRAM_BASE @ Load UART address from IRAM - ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4] - str \rv, [\tmp, #4] @ Store in tegra_uart_phys - sub \rv, \rv, #IO_APB_PHYS @ Calculate virt address - add \rv, \rv, #IO_APB_VIRT - str \rv, [\tmp, #8] @ Store in tegra_uart_virt - b 100f - - .align -99: .word . - .word tegra_uart_config - .ltorg - -100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys - ldr \rv, [\tmp, #8] @ Load tegra_uart_virt - .endm - -#define UART_SHIFT 2 - -/* - * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra - * check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case. - * We use the fact that all 5 valid UART addresses all have something in the - * 2nd-to-lowest byte. - */ - - .macro senduart, rd, rx - tst \rx, #0x0000ff00 - strneb \rd, [\rx, #UART_TX << UART_SHIFT] -1001: - .endm - - .macro busyuart, rd, rx - tst \rx, #0x0000ff00 - beq 1002f -1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1001b -1002: - .endm - - .macro waituart, rd, rx -#ifdef FLOW_CONTROL - tst \rx, #0x0000ff00 - beq 1002f -1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] - tst \rd, #UART_MSR_CTS - beq 1001b -1002: -#endif - .endm diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h deleted file mode 100644 index aad1a2c1d714..000000000000 --- a/arch/arm/mach-tegra/include/mach/irqs.h +++ /dev/null @@ -1,182 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/irqs.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_IRQS_H -#define __MACH_TEGRA_IRQS_H - -#define INT_GIC_BASE 0 - -#define IRQ_LOCALTIMER 29 - -/* Primary Interrupt Controller */ -#define INT_PRI_BASE (INT_GIC_BASE + 32) -#define INT_TMR1 (INT_PRI_BASE + 0) -#define INT_TMR2 (INT_PRI_BASE + 1) -#define INT_RTC (INT_PRI_BASE + 2) -#define INT_I2S2 (INT_PRI_BASE + 3) -#define INT_SHR_SEM_INBOX_IBF (INT_PRI_BASE + 4) -#define INT_SHR_SEM_INBOX_IBE (INT_PRI_BASE + 5) -#define INT_SHR_SEM_OUTBOX_IBF (INT_PRI_BASE + 6) -#define INT_SHR_SEM_OUTBOX_IBE (INT_PRI_BASE + 7) -#define INT_VDE_UCQ_ERROR (INT_PRI_BASE + 8) -#define INT_VDE_SYNC_TOKEN (INT_PRI_BASE + 9) -#define INT_VDE_BSE_V (INT_PRI_BASE + 10) -#define INT_VDE_BSE_A (INT_PRI_BASE + 11) -#define INT_VDE_SXE (INT_PRI_BASE + 12) -#define INT_I2S1 (INT_PRI_BASE + 13) -#define INT_SDMMC1 (INT_PRI_BASE + 14) -#define INT_SDMMC2 (INT_PRI_BASE + 15) -#define INT_XIO (INT_PRI_BASE + 16) -#define INT_VDE (INT_PRI_BASE + 17) -#define INT_AVP_UCQ (INT_PRI_BASE + 18) -#define INT_SDMMC3 (INT_PRI_BASE + 19) -#define INT_USB (INT_PRI_BASE + 20) -#define INT_USB2 (INT_PRI_BASE + 21) -#define INT_PRI_RES_22 (INT_PRI_BASE + 22) -#define INT_EIDE (INT_PRI_BASE + 23) -#define INT_NANDFLASH (INT_PRI_BASE + 24) -#define INT_VCP (INT_PRI_BASE + 25) -#define INT_APB_DMA (INT_PRI_BASE + 26) -#define INT_AHB_DMA (INT_PRI_BASE + 27) -#define INT_GNT_0 (INT_PRI_BASE + 28) -#define INT_GNT_1 (INT_PRI_BASE + 29) -#define INT_OWR (INT_PRI_BASE + 30) -#define INT_SDMMC4 (INT_PRI_BASE + 31) - -/* Secondary Interrupt Controller */ -#define INT_SEC_BASE (INT_PRI_BASE + 32) -#define INT_GPIO1 (INT_SEC_BASE + 0) -#define INT_GPIO2 (INT_SEC_BASE + 1) -#define INT_GPIO3 (INT_SEC_BASE + 2) -#define INT_GPIO4 (INT_SEC_BASE + 3) -#define INT_UARTA (INT_SEC_BASE + 4) -#define INT_UARTB (INT_SEC_BASE + 5) -#define INT_I2C (INT_SEC_BASE + 6) -#define INT_SPI (INT_SEC_BASE + 7) -#define INT_TWC (INT_SEC_BASE + 8) -#define INT_TMR3 (INT_SEC_BASE + 9) -#define INT_TMR4 (INT_SEC_BASE + 10) -#define INT_FLOW_RSM0 (INT_SEC_BASE + 11) -#define INT_FLOW_RSM1 (INT_SEC_BASE + 12) -#define INT_SPDIF (INT_SEC_BASE + 13) -#define INT_UARTC (INT_SEC_BASE + 14) -#define INT_MIPI (INT_SEC_BASE + 15) -#define INT_EVENTA (INT_SEC_BASE + 16) -#define INT_EVENTB (INT_SEC_BASE + 17) -#define INT_EVENTC (INT_SEC_BASE + 18) -#define INT_EVENTD (INT_SEC_BASE + 19) -#define INT_VFIR (INT_SEC_BASE + 20) -#define INT_DVC (INT_SEC_BASE + 21) -#define INT_SYS_STATS_MON (INT_SEC_BASE + 22) -#define INT_GPIO5 (INT_SEC_BASE + 23) -#define INT_CPU0_PMU_INTR (INT_SEC_BASE + 24) -#define INT_CPU1_PMU_INTR (INT_SEC_BASE + 25) -#define INT_SEC_RES_26 (INT_SEC_BASE + 26) -#define INT_S_LINK1 (INT_SEC_BASE + 27) -#define INT_APB_DMA_COP (INT_SEC_BASE + 28) -#define INT_AHB_DMA_COP (INT_SEC_BASE + 29) -#define INT_DMA_TX (INT_SEC_BASE + 30) -#define INT_DMA_RX (INT_SEC_BASE + 31) - -/* Tertiary Interrupt Controller */ -#define INT_TRI_BASE (INT_SEC_BASE + 32) -#define INT_HOST1X_COP_SYNCPT (INT_TRI_BASE + 0) -#define INT_HOST1X_MPCORE_SYNCPT (INT_TRI_BASE + 1) -#define INT_HOST1X_COP_GENERAL (INT_TRI_BASE + 2) -#define INT_HOST1X_MPCORE_GENERAL (INT_TRI_BASE + 3) -#define INT_MPE_GENERAL (INT_TRI_BASE + 4) -#define INT_VI_GENERAL (INT_TRI_BASE + 5) -#define INT_EPP_GENERAL (INT_TRI_BASE + 6) -#define INT_ISP_GENERAL (INT_TRI_BASE + 7) -#define INT_2D_GENERAL (INT_TRI_BASE + 8) -#define INT_DISPLAY_GENERAL (INT_TRI_BASE + 9) -#define INT_DISPLAY_B_GENERAL (INT_TRI_BASE + 10) -#define INT_HDMI (INT_TRI_BASE + 11) -#define INT_TVO_GENERAL (INT_TRI_BASE + 12) -#define INT_MC_GENERAL (INT_TRI_BASE + 13) -#define INT_EMC_GENERAL (INT_TRI_BASE + 14) -#define INT_TRI_RES_15 (INT_TRI_BASE + 15) -#define INT_TRI_RES_16 (INT_TRI_BASE + 16) -#define INT_AC97 (INT_TRI_BASE + 17) -#define INT_SPI_2 (INT_TRI_BASE + 18) -#define INT_SPI_3 (INT_TRI_BASE + 19) -#define INT_I2C2 (INT_TRI_BASE + 20) -#define INT_KBC (INT_TRI_BASE + 21) -#define INT_EXTERNAL_PMU (INT_TRI_BASE + 22) -#define INT_GPIO6 (INT_TRI_BASE + 23) -#define INT_TVDAC (INT_TRI_BASE + 24) -#define INT_GPIO7 (INT_TRI_BASE + 25) -#define INT_UARTD (INT_TRI_BASE + 26) -#define INT_UARTE (INT_TRI_BASE + 27) -#define INT_I2C3 (INT_TRI_BASE + 28) -#define INT_SPI_4 (INT_TRI_BASE + 29) -#define INT_TRI_RES_30 (INT_TRI_BASE + 30) -#define INT_SW_RESERVED (INT_TRI_BASE + 31) - -/* Quaternary Interrupt Controller */ -#define INT_QUAD_BASE (INT_TRI_BASE + 32) -#define INT_SNOR (INT_QUAD_BASE + 0) -#define INT_USB3 (INT_QUAD_BASE + 1) -#define INT_PCIE_INTR (INT_QUAD_BASE + 2) -#define INT_PCIE_MSI (INT_QUAD_BASE + 3) -#define INT_QUAD_RES_4 (INT_QUAD_BASE + 4) -#define INT_QUAD_RES_5 (INT_QUAD_BASE + 5) -#define INT_QUAD_RES_6 (INT_QUAD_BASE + 6) -#define INT_QUAD_RES_7 (INT_QUAD_BASE + 7) -#define INT_APB_DMA_CH0 (INT_QUAD_BASE + 8) -#define INT_APB_DMA_CH1 (INT_QUAD_BASE + 9) -#define INT_APB_DMA_CH2 (INT_QUAD_BASE + 10) -#define INT_APB_DMA_CH3 (INT_QUAD_BASE + 11) -#define INT_APB_DMA_CH4 (INT_QUAD_BASE + 12) -#define INT_APB_DMA_CH5 (INT_QUAD_BASE + 13) -#define INT_APB_DMA_CH6 (INT_QUAD_BASE + 14) -#define INT_APB_DMA_CH7 (INT_QUAD_BASE + 15) -#define INT_APB_DMA_CH8 (INT_QUAD_BASE + 16) -#define INT_APB_DMA_CH9 (INT_QUAD_BASE + 17) -#define INT_APB_DMA_CH10 (INT_QUAD_BASE + 18) -#define INT_APB_DMA_CH11 (INT_QUAD_BASE + 19) -#define INT_APB_DMA_CH12 (INT_QUAD_BASE + 20) -#define INT_APB_DMA_CH13 (INT_QUAD_BASE + 21) -#define INT_APB_DMA_CH14 (INT_QUAD_BASE + 22) -#define INT_APB_DMA_CH15 (INT_QUAD_BASE + 23) -#define INT_QUAD_RES_24 (INT_QUAD_BASE + 24) -#define INT_QUAD_RES_25 (INT_QUAD_BASE + 25) -#define INT_QUAD_RES_26 (INT_QUAD_BASE + 26) -#define INT_QUAD_RES_27 (INT_QUAD_BASE + 27) -#define INT_QUAD_RES_28 (INT_QUAD_BASE + 28) -#define INT_QUAD_RES_29 (INT_QUAD_BASE + 29) -#define INT_QUAD_RES_30 (INT_QUAD_BASE + 30) -#define INT_QUAD_RES_31 (INT_QUAD_BASE + 31) - -/* Tegra30 has 5 banks of 32 IRQs */ -#define INT_MAIN_NR (32 * 5) -#define INT_GPIO_BASE (INT_PRI_BASE + INT_MAIN_NR) - -/* Tegra30 has 8 banks of 32 GPIOs */ -#define INT_GPIO_NR (32 * 8) - -#define TEGRA_NR_IRQS (INT_GPIO_BASE + INT_GPIO_NR) - -#define INT_BOARD_BASE TEGRA_NR_IRQS -#define NR_BOARD_IRQS 32 - -#define NR_IRQS (INT_BOARD_BASE + NR_BOARD_IRQS) - -#endif diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h index 27725750ca3e..485003f9b636 100644 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ b/arch/arm/mach-tegra/include/mach/uncompress.h @@ -29,7 +29,6 @@ #include <linux/serial_reg.h> #include "../../iomap.h" -#include "../../irammap.h" #define BIT(x) (1 << (x)) #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) @@ -52,17 +51,6 @@ static inline void flush(void) { } -static inline void save_uart_address(void) -{ - u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET); - - if (uart) { - buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE; - buf[1] = (u32)uart; - } else - buf[0] = 0; -} - static const struct { u32 base; u32 reset_reg; @@ -139,51 +127,19 @@ int auto_odmdata(void) } #endif -#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH -int auto_scratch(void) -{ - int i; - - /* - * Look for the first UART that: - * a) Is not in reset. - * b) Is clocked. - * c) Has a 'D' in the scratchpad register. - * - * Note that on Tegra30, the first two conditions are required, since - * if not true, accesses to the UART scratch register will hang. - * Tegra20 doesn't have this issue. - * - * The intent is that the bootloader will tell the kernel which UART - * to use by setting up those conditions. If nothing found, we'll fall - * back to what's specified in TEGRA_DEBUG_UART_BASE. - */ - for (i = 0; i < ARRAY_SIZE(uarts); i++) { - if (!uart_clocked(i)) - continue; - - uart = (volatile u8 *)uarts[i].base; - if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D') - continue; - - return i; - } - - return -1; -} -#endif - /* * Setup before decompression. This is where we do UART selection for * earlyprintk and init the uart_base register. */ static inline void arch_decomp_setup(void) { - int uart_id, auto_uart_id; + int uart_id; volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE; u32 chip, div; -#if defined(CONFIG_TEGRA_DEBUG_UARTA) +#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + uart_id = auto_odmdata(); +#elif defined(CONFIG_TEGRA_DEBUG_UARTA) uart_id = 0; #elif defined(CONFIG_TEGRA_DEBUG_UARTB) uart_id = 1; @@ -193,19 +149,7 @@ static inline void arch_decomp_setup(void) uart_id = 3; #elif defined(CONFIG_TEGRA_DEBUG_UARTE) uart_id = 4; -#else - uart_id = -1; -#endif - -#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) - auto_uart_id = auto_odmdata(); -#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH) - auto_uart_id = auto_scratch(); -#else - auto_uart_id = -1; #endif - if (auto_uart_id != -1) - uart_id = auto_uart_id; if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) || !uart_clocked(uart_id)) @@ -213,7 +157,6 @@ static inline void arch_decomp_setup(void) else uart = (volatile u8 *)uarts[uart_id].base; - save_uart_address(); if (uart == NULL) return; diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c index 7d09f301b3a1..bb9c9c29d181 100644 --- a/arch/arm/mach-tegra/io.c +++ b/arch/arm/mach-tegra/io.c @@ -59,5 +59,6 @@ static struct map_desc tegra_io_desc[] __initdata = { void __init tegra_map_common_io(void) { + debug_ll_io_init(); iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc)); } diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index 53151030a07d..db8be51cad80 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -261,20 +261,6 @@ #define TEGRA_SDMMC4_BASE 0xC8000600 #define TEGRA_SDMMC4_SIZE SZ_512 -#if defined(CONFIG_TEGRA_DEBUG_UART_NONE) -# define TEGRA_DEBUG_UART_BASE 0 -#elif defined(CONFIG_TEGRA_DEBUG_UARTA) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTA_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTB) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTB_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTC) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTC_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTD) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTD_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTE) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTE_BASE -#endif - /* On TEGRA, many peripherals are very closely packed in * two 256MB io windows (that actually only use about 64KB * at the start of each). diff --git a/arch/arm/mach-tegra/irammap.h b/arch/arm/mach-tegra/irammap.h index 0cbe63261854..501952a84344 100644 --- a/arch/arm/mach-tegra/irammap.h +++ b/arch/arm/mach-tegra/irammap.h @@ -23,13 +23,4 @@ #define TEGRA_IRAM_RESET_HANDLER_OFFSET 0 #define TEGRA_IRAM_RESET_HANDLER_SIZE SZ_1K -/* - * These locations are written to by uncompress.h, and read by debug-macro.S. - * The first word holds the cookie value if the data is valid. The second - * word holds the UART physical address. - */ -#define TEGRA_IRAM_DEBUG_UART_OFFSET SZ_1K -#define TEGRA_IRAM_DEBUG_UART_SIZE 8 -#define TEGRA_IRAM_DEBUG_UART_COOKIE 0x55415254 - #endif diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index f18fc3ab4e58..53d085871798 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -43,6 +43,9 @@ #include "board.h" #include "iomap.h" +/* Hack - need to parse this from DT */ +#define INT_PCIE_INTR 130 + /* register definitions */ #define AFI_OFFSET 0x3800 #define PADS_OFFSET 0x3000 diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c new file mode 100644 index 000000000000..1b11707eaca0 --- /dev/null +++ b/arch/arm/mach-tegra/pm.c @@ -0,0 +1,216 @@ +/* + * CPU complex suspend & resume functions for Tegra SoCs + * + * Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/cpumask.h> +#include <linux/delay.h> +#include <linux/cpu_pm.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <asm/smp_plat.h> +#include <asm/cacheflush.h> +#include <asm/suspend.h> +#include <asm/idmap.h> +#include <asm/proc-fns.h> +#include <asm/tlbflush.h> + +#include "iomap.h" +#include "reset.h" +#include "flowctrl.h" +#include "sleep.h" +#include "tegra_cpu_car.h" + +#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ + +#define PMC_CTRL 0x0 +#define PMC_CPUPWRGOOD_TIMER 0xc8 +#define PMC_CPUPWROFF_TIMER 0xcc + +#ifdef CONFIG_PM_SLEEP +static unsigned int g_diag_reg; +static DEFINE_SPINLOCK(tegra_lp2_lock); +static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); +static struct clk *tegra_pclk; +void (*tegra_tear_down_cpu)(void); + +void save_cpu_arch_register(void) +{ + /* read diagnostic register */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); + return; +} + +void restore_cpu_arch_register(void) +{ + /* write diagnostic register */ + asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); + return; +} + +static void set_power_timers(unsigned long us_on, unsigned long us_off) +{ + unsigned long long ticks; + unsigned long long pclk; + unsigned long rate; + static unsigned long tegra_last_pclk; + + if (tegra_pclk == NULL) { + tegra_pclk = clk_get_sys(NULL, "pclk"); + WARN_ON(IS_ERR(tegra_pclk)); + } + + rate = clk_get_rate(tegra_pclk); + + if (WARN_ON_ONCE(rate <= 0)) + pclk = 100000000; + else + pclk = rate; + + if ((rate != tegra_last_pclk)) { + ticks = (us_on * pclk) + 999999ull; + do_div(ticks, 1000000); + writel((unsigned long)ticks, pmc + PMC_CPUPWRGOOD_TIMER); + + ticks = (us_off * pclk) + 999999ull; + do_div(ticks, 1000000); + writel((unsigned long)ticks, pmc + PMC_CPUPWROFF_TIMER); + wmb(); + } + tegra_last_pclk = pclk; +} + +/* + * restore_cpu_complex + * + * restores cpu clock setting, clears flow controller + * + * Always called on CPU 0. + */ +static void restore_cpu_complex(void) +{ + int cpu = smp_processor_id(); + + BUG_ON(cpu != 0); + +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif + + /* Restore the CPU clock settings */ + tegra_cpu_clock_resume(); + + flowctrl_cpu_suspend_exit(cpu); + + restore_cpu_arch_register(); +} + +/* + * suspend_cpu_complex + * + * saves pll state for use by restart_plls, prepares flow controller for + * transition to suspend state + * + * Must always be called on cpu 0. + */ +static void suspend_cpu_complex(void) +{ + int cpu = smp_processor_id(); + + BUG_ON(cpu != 0); + +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif + + /* Save the CPU clock settings */ + tegra_cpu_clock_suspend(); + + flowctrl_cpu_suspend_enter(cpu); + + save_cpu_arch_register(); +} + +void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id) +{ + u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; + + spin_lock(&tegra_lp2_lock); + + BUG_ON(!(*cpu_in_lp2 & BIT(phy_cpu_id))); + *cpu_in_lp2 &= ~BIT(phy_cpu_id); + + spin_unlock(&tegra_lp2_lock); +} + +bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id) +{ + bool last_cpu = false; + cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask; + u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; + + spin_lock(&tegra_lp2_lock); + + BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id))); + *cpu_in_lp2 |= BIT(phy_cpu_id); + + if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask)) + last_cpu = true; + + spin_unlock(&tegra_lp2_lock); + return last_cpu; +} + +static int tegra_sleep_cpu(unsigned long v2p) +{ + /* Switch to the identity mapping. */ + cpu_switch_mm(idmap_pgd, &init_mm); + + /* Flush the TLB. */ + local_flush_tlb_all(); + + tegra_sleep_cpu_finish(v2p); + + /* should never here */ + BUG(); + + return 0; +} + +void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) +{ + u32 mode; + + /* Only the last cpu down does the final suspend steps */ + mode = readl(pmc + PMC_CTRL); + mode |= TEGRA_POWER_CPU_PWRREQ_OE; + writel(mode, pmc + PMC_CTRL); + + set_power_timers(cpu_on_time, cpu_off_time); + + cpu_cluster_pm_enter(); + suspend_cpu_complex(); + + cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + + restore_cpu_complex(); + cpu_cluster_pm_exit(); +} +#endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h new file mode 100644 index 000000000000..787335cc964c --- /dev/null +++ b/arch/arm/mach-tegra/pm.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2010 Google, Inc. + * Copyright (c) 2010-2012 NVIDIA Corporation. All rights reserved. + * + * Author: + * Colin Cross <ccross@google.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _MACH_TEGRA_PM_H_ +#define _MACH_TEGRA_PM_H_ + +extern unsigned long l2x0_saved_regs_addr; + +void save_cpu_arch_register(void); +void restore_cpu_arch_register(void); + +void tegra_clear_cpu_in_lp2(int phy_cpu_id); +bool tegra_set_cpu_in_lp2(int phy_cpu_id); + +void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time); +extern void (*tegra_tear_down_cpu)(void); + +#endif /* _MACH_TEGRA_PM_H_ */ diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index e05da7d10c3b..3fd89ecd158e 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -25,6 +25,7 @@ #include "iomap.h" #include "irammap.h" #include "reset.h" +#include "sleep.h" #include "fuse.h" #define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \ @@ -79,5 +80,10 @@ void __init tegra_cpu_reset_handler_init(void) virt_to_phys((void *)tegra_secondary_startup); #endif +#ifdef CONFIG_PM_SLEEP + __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] = + virt_to_phys((void *)tegra_resume); +#endif + tegra_cpu_reset_handler_enable(); } diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index de88bf851dd3..c90d8e9c4ad2 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -29,6 +29,8 @@ #ifndef __ASSEMBLY__ +#include "irammap.h" + extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE]; void __tegra_cpu_reset_handler_start(void); @@ -36,6 +38,13 @@ void __tegra_cpu_reset_handler(void); void __tegra_cpu_reset_handler_end(void); void tegra_secondary_startup(void); +#ifdef CONFIG_PM_SLEEP +#define tegra_cpu_lp2_mask \ + (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ + ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \ + (u32)__tegra_cpu_reset_handler_start))) +#endif + #define tegra_cpu_reset_handler_offset \ ((u32)__tegra_cpu_reset_handler - \ (u32)__tegra_cpu_reset_handler_start) diff --git a/arch/arm/mach-tegra/sleep-t20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 72ce709799da..72ce709799da 100644 --- a/arch/arm/mach-tegra/sleep-t20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S diff --git a/arch/arm/mach-tegra/sleep-t30.S b/arch/arm/mach-tegra/sleep-tegra30.S index be7614b7c5cb..562a8e7e413d 100644 --- a/arch/arm/mach-tegra/sleep-t30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -17,6 +17,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/asm-offsets.h> #include "sleep.h" #include "flowctrl.h" @@ -80,6 +81,7 @@ delay_1: ldr r3, [r1] @ read CSR str r3, [r1] @ clear CSR tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN + moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2 movne r3, #FLOW_CTRL_WAITEVENT @ For hotplug str r3, [r2] ldr r0, [r2] @@ -103,3 +105,67 @@ wfe_war: ENDPROC(tegra30_cpu_shutdown) #endif + +#ifdef CONFIG_PM_SLEEP +/* + * tegra30_sleep_cpu_secondary_finish(unsigned long v2p) + * + * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU. + */ +ENTRY(tegra30_sleep_cpu_secondary_finish) + mov r7, lr + + /* Flush and disable the L1 data cache */ + bl tegra_disable_clean_inv_dcache + + /* Powergate this CPU. */ + mov r0, #0 @ power mode flags (!hotplug) + bl tegra30_cpu_shutdown + mov r0, #1 @ never return here + mov pc, r7 +ENDPROC(tegra30_sleep_cpu_secondary_finish) + +/* + * tegra30_tear_down_cpu + * + * Switches the CPU to enter sleep. + */ +ENTRY(tegra30_tear_down_cpu) + mov32 r6, TEGRA_FLOW_CTRL_BASE + + b tegra30_enter_sleep +ENDPROC(tegra30_tear_down_cpu) + +/* + * tegra30_enter_sleep + * + * uses flow controller to enter sleep state + * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1 + * executes from SDRAM with target state is LP2 + * r6 = TEGRA_FLOW_CTRL_BASE + */ +tegra30_enter_sleep: + cpu_id r1 + + cpu_to_csr_reg r2, r1 + ldr r0, [r6, r2] + orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + orr r0, r0, #FLOW_CTRL_CSR_ENABLE + str r0, [r6, r2] + + mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT + orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + cpu_to_halt_reg r2, r1 + str r0, [r6, r2] + dsb + ldr r0, [r6, r2] /* memory barrier */ + +halted: + isb + dsb + wfi /* CPU should be power gated here */ + + /* !!!FIXME!!! Implement halt failure handler */ + b halted + +#endif diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 08e9481c049e..26afa7cbed11 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -25,9 +25,87 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/cache.h> +#include <asm/cp15.h> +#include <asm/hardware/cache-l2x0.h> #include "iomap.h" #include "flowctrl.h" #include "sleep.h" +#ifdef CONFIG_PM_SLEEP +/* + * tegra_disable_clean_inv_dcache + * + * disable, clean & invalidate the D-cache + * + * Corrupted registers: r1-r3, r6, r8, r9-r11 + */ +ENTRY(tegra_disable_clean_inv_dcache) + stmfd sp!, {r0, r4-r5, r7, r9-r11, lr} + dmb @ ensure ordering + + /* Disable the D-cache */ + mrc p15, 0, r2, c1, c0, 0 + bic r2, r2, #CR_C + mcr p15, 0, r2, c1, c0, 0 + isb + + /* Flush the D-cache */ + bl v7_flush_dcache_louis + + /* Trun off coherency */ + exit_smp r4, r5 + + ldmfd sp!, {r0, r4-r5, r7, r9-r11, pc} +ENDPROC(tegra_disable_clean_inv_dcache) + +/* + * tegra_sleep_cpu_finish(unsigned long v2p) + * + * enters suspend in LP2 by turning off the mmu and jumping to + * tegra?_tear_down_cpu + */ +ENTRY(tegra_sleep_cpu_finish) + /* Flush and disable the L1 data cache */ + bl tegra_disable_clean_inv_dcache + + mov32 r6, tegra_tear_down_cpu + ldr r1, [r6] + add r1, r1, r0 + + mov32 r3, tegra_shut_off_mmu + add r3, r3, r0 + mov r0, r1 + + mov pc, r3 +ENDPROC(tegra_sleep_cpu_finish) + +/* + * tegra_shut_off_mmu + * + * r0 = physical address to jump to with mmu off + * + * called with VA=PA mapping + * turns off MMU, icache, dcache and branch prediction + */ + .align L1_CACHE_SHIFT + .pushsection .idmap.text, "ax" +ENTRY(tegra_shut_off_mmu) + mrc p15, 0, r3, c1, c0, 0 + movw r2, #CR_I | CR_Z | CR_C | CR_M + bic r3, r3, r2 + dsb + mcr p15, 0, r3, c1, c0, 0 + isb +#ifdef CONFIG_CACHE_L2X0 + /* Disable L2 cache */ + mov32 r4, TEGRA_ARM_PERIF_BASE + 0x3000 + mov r5, #0 + str r5, [r4, #L2X0_CTRL] +#endif + mov pc, r0 +ENDPROC(tegra_shut_off_mmu) + .popsection +#endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 4889b281c5f9..9821ee725420 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -71,7 +71,41 @@ str \tmp2, [\tmp1] @ invalidate SCU tags for CPU dsb .endm + +/* Macro to resume & re-enable L2 cache */ +#ifndef L2X0_CTRL_EN +#define L2X0_CTRL_EN 1 +#endif + +#ifdef CONFIG_CACHE_L2X0 +.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs + adr \tmp1, \phys_l2x0_saved_regs + ldr \tmp1, [\tmp1] + ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE] + ldr \tmp3, [\tmp2, #L2X0_CTRL] + tst \tmp3, #L2X0_CTRL_EN + bne exit_l2_resume + ldr \tmp3, [\tmp1, #L2X0_R_TAG_LATENCY] + str \tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_DATA_LATENCY] + str \tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL] + str \tmp3, [\tmp2, #L2X0_PREFETCH_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_PWR_CTRL] + str \tmp3, [\tmp2, #L2X0_POWER_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_AUX_CTRL] + str \tmp3, [\tmp2, #L2X0_AUX_CTRL] + mov \tmp3, #L2X0_CTRL_EN + str \tmp3, [\tmp2, #L2X0_CTRL] +exit_l2_resume: +.endm +#else /* CONFIG_CACHE_L2X0 */ +.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs +.endm +#endif /* CONFIG_CACHE_L2X0 */ #else +void tegra_resume(void); +int tegra_sleep_cpu_finish(unsigned long); #ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_init(void); @@ -81,5 +115,8 @@ static inline void tegra20_hotplug_init(void) {} static inline void tegra30_hotplug_init(void) {} #endif +int tegra30_sleep_cpu_secondary_finish(unsigned long); +void tegra30_tear_down_cpu(void); + #endif #endif diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index f5b453f4bf4d..efc000e32e1c 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -31,6 +31,8 @@ #include <asm/clkdev.h> +#include <mach/powergate.h> + #include "clock.h" #include "fuse.h" #include "iomap.h" @@ -309,6 +311,31 @@ #define CPU_CLOCK(cpu) (0x1 << (8 + cpu)) #define CPU_RESET(cpu) (0x1111ul << (cpu)) +#define CLK_RESET_CCLK_BURST 0x20 +#define CLK_RESET_CCLK_DIVIDER 0x24 +#define CLK_RESET_PLLX_BASE 0xe0 +#define CLK_RESET_PLLX_MISC 0xe4 + +#define CLK_RESET_SOURCE_CSITE 0x1d4 + +#define CLK_RESET_CCLK_BURST_POLICY_SHIFT 28 +#define CLK_RESET_CCLK_RUN_POLICY_SHIFT 4 +#define CLK_RESET_CCLK_IDLE_POLICY_SHIFT 0 +#define CLK_RESET_CCLK_IDLE_POLICY 1 +#define CLK_RESET_CCLK_RUN_POLICY 2 +#define CLK_RESET_CCLK_BURST_POLICY_PLLX 8 + +#ifdef CONFIG_PM_SLEEP +static struct cpu_clk_suspend_context { + u32 pllx_misc; + u32 pllx_base; + + u32 cpu_burst; + u32 clk_csite_src; + u32 cclk_divider; +} tegra30_cpu_clk_sctx; +#endif + /** * Structure defining the fields for USB UTMI clocks Parameters. */ @@ -2386,12 +2413,93 @@ static void tegra30_disable_cpu_clock(u32 cpu) reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); } +#ifdef CONFIG_PM_SLEEP +static bool tegra30_cpu_rail_off_ready(void) +{ + unsigned int cpu_rst_status; + int cpu_pwr_status; + + cpu_rst_status = readl(reg_clk_base + + TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS); + cpu_pwr_status = tegra_powergate_is_powered(TEGRA_POWERGATE_CPU1) || + tegra_powergate_is_powered(TEGRA_POWERGATE_CPU2) || + tegra_powergate_is_powered(TEGRA_POWERGATE_CPU3); + + if (((cpu_rst_status & 0xE) != 0xE) || cpu_pwr_status) + return false; + + return true; +} + +static void tegra30_cpu_clock_suspend(void) +{ + /* switch coresite to clk_m, save off original source */ + tegra30_cpu_clk_sctx.clk_csite_src = + readl(reg_clk_base + CLK_RESET_SOURCE_CSITE); + writel(3<<30, reg_clk_base + CLK_RESET_SOURCE_CSITE); + + tegra30_cpu_clk_sctx.cpu_burst = + readl(reg_clk_base + CLK_RESET_CCLK_BURST); + tegra30_cpu_clk_sctx.pllx_base = + readl(reg_clk_base + CLK_RESET_PLLX_BASE); + tegra30_cpu_clk_sctx.pllx_misc = + readl(reg_clk_base + CLK_RESET_PLLX_MISC); + tegra30_cpu_clk_sctx.cclk_divider = + readl(reg_clk_base + CLK_RESET_CCLK_DIVIDER); +} + +static void tegra30_cpu_clock_resume(void) +{ + unsigned int reg, policy; + + /* Is CPU complex already running on PLLX? */ + reg = readl(reg_clk_base + CLK_RESET_CCLK_BURST); + policy = (reg >> CLK_RESET_CCLK_BURST_POLICY_SHIFT) & 0xF; + + if (policy == CLK_RESET_CCLK_IDLE_POLICY) + reg = (reg >> CLK_RESET_CCLK_IDLE_POLICY_SHIFT) & 0xF; + else if (policy == CLK_RESET_CCLK_RUN_POLICY) + reg = (reg >> CLK_RESET_CCLK_RUN_POLICY_SHIFT) & 0xF; + else + BUG(); + + if (reg != CLK_RESET_CCLK_BURST_POLICY_PLLX) { + /* restore PLLX settings if CPU is on different PLL */ + writel(tegra30_cpu_clk_sctx.pllx_misc, + reg_clk_base + CLK_RESET_PLLX_MISC); + writel(tegra30_cpu_clk_sctx.pllx_base, + reg_clk_base + CLK_RESET_PLLX_BASE); + + /* wait for PLL stabilization if PLLX was enabled */ + if (tegra30_cpu_clk_sctx.pllx_base & (1 << 30)) + udelay(300); + } + + /* + * Restore original burst policy setting for calls resulting from CPU + * LP2 in idle or system suspend. + */ + writel(tegra30_cpu_clk_sctx.cclk_divider, + reg_clk_base + CLK_RESET_CCLK_DIVIDER); + writel(tegra30_cpu_clk_sctx.cpu_burst, + reg_clk_base + CLK_RESET_CCLK_BURST); + + writel(tegra30_cpu_clk_sctx.clk_csite_src, + reg_clk_base + CLK_RESET_SOURCE_CSITE); +} +#endif + static struct tegra_cpu_car_ops tegra30_cpu_car_ops = { .wait_for_reset = tegra30_wait_cpu_in_reset, .put_in_reset = tegra30_put_cpu_in_reset, .out_of_reset = tegra30_cpu_out_of_reset, .enable_clock = tegra30_enable_cpu_clock, .disable_clock = tegra30_disable_cpu_clock, +#ifdef CONFIG_PM_SLEEP + .rail_off_ready = tegra30_cpu_rail_off_ready, + .suspend = tegra30_cpu_clock_suspend, + .resume = tegra30_cpu_clock_resume, +#endif }; void __init tegra30_cpu_car_ops_init(void) diff --git a/arch/arm/mach-tegra/tegra_cpu_car.h b/arch/arm/mach-tegra/tegra_cpu_car.h index 30d063ad2bef..9764d31032b7 100644 --- a/arch/arm/mach-tegra/tegra_cpu_car.h +++ b/arch/arm/mach-tegra/tegra_cpu_car.h @@ -30,6 +30,12 @@ * CPU clock un-gate * disable_clock: * CPU clock gate + * rail_off_ready: + * CPU is ready for rail off + * suspend: + * save the clock settings when CPU go into low-power state + * resume: + * restore the clock settings when CPU exit low-power state */ struct tegra_cpu_car_ops { void (*wait_for_reset)(u32 cpu); @@ -37,6 +43,11 @@ struct tegra_cpu_car_ops { void (*out_of_reset)(u32 cpu); void (*enable_clock)(u32 cpu); void (*disable_clock)(u32 cpu); +#ifdef CONFIG_PM_SLEEP + bool (*rail_off_ready)(void); + void (*suspend)(void); + void (*resume)(void); +#endif }; extern struct tegra_cpu_car_ops *tegra_cpu_car_ops; @@ -81,6 +92,32 @@ static inline void tegra_disable_cpu_clock(u32 cpu) tegra_cpu_car_ops->disable_clock(cpu); } +#ifdef CONFIG_PM_SLEEP +static inline bool tegra_cpu_rail_off_ready(void) +{ + if (WARN_ON(!tegra_cpu_car_ops->rail_off_ready)) + return false; + + return tegra_cpu_car_ops->rail_off_ready(); +} + +static inline void tegra_cpu_clock_suspend(void) +{ + if (WARN_ON(!tegra_cpu_car_ops->suspend)) + return; + + tegra_cpu_car_ops->suspend(); +} + +static inline void tegra_cpu_clock_resume(void) +{ + if (WARN_ON(!tegra_cpu_car_ops->resume)) + return; + + tegra_cpu_car_ops->resume(); +} +#endif + void tegra20_cpu_car_ops_init(void); void tegra30_cpu_car_ops_init(void); diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index 6ff503536512..e4863f3e9ee7 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -26,16 +26,14 @@ #include <linux/clocksource.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> #include <asm/smp_twd.h> #include <asm/sched_clock.h> -#include <mach/irqs.h> - #include "board.h" -#include "clock.h" -#include "iomap.h" #define RTC_SECONDS 0x08 #define RTC_SHADOW_SECONDS 0x0c @@ -53,8 +51,8 @@ #define TIMER_PTV 0x0 #define TIMER_PCR 0x4 -static void __iomem *timer_reg_base = IO_ADDRESS(TEGRA_TMR1_BASE); -static void __iomem *rtc_base = IO_ADDRESS(TEGRA_RTC_BASE); +static void __iomem *timer_reg_base; +static void __iomem *rtc_base; static struct timespec persistent_ts; static u64 persistent_ms, last_persistent_ms; @@ -158,40 +156,66 @@ static struct irqaction tegra_timer_irq = { .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH, .handler = tegra_timer_interrupt, .dev_id = &tegra_clockevent, - .irq = INT_TMR3, }; -#ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - TEGRA_ARM_PERIF_BASE + 0x600, - IRQ_LOCALTIMER); +static const struct of_device_id timer_match[] __initconst = { + { .compatible = "nvidia,tegra20-timer" }, + {} +}; -static void __init tegra_twd_init(void) -{ - int err = twd_local_timer_register(&twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); -} -#else -#define tegra_twd_init() do {} while(0) -#endif +static const struct of_device_id rtc_match[] __initconst = { + { .compatible = "nvidia,tegra20-rtc" }, + {} +}; static void __init tegra_init_timer(void) { + struct device_node *np; struct clk *clk; unsigned long rate; int ret; + np = of_find_matching_node(NULL, timer_match); + if (!np) { + pr_err("Failed to find timer DT node\n"); + BUG(); + } + + timer_reg_base = of_iomap(np, 0); + if (!timer_reg_base) { + pr_err("Can't map timer registers"); + BUG(); + } + + tegra_timer_irq.irq = irq_of_parse_and_map(np, 2); + if (tegra_timer_irq.irq <= 0) { + pr_err("Failed to map timer IRQ\n"); + BUG(); + } + clk = clk_get_sys("timer", NULL); if (IS_ERR(clk)) { - pr_warn("Unable to get timer clock." - " Assuming 12Mhz input clock.\n"); + pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n"); rate = 12000000; } else { clk_prepare_enable(clk); rate = clk_get_rate(clk); } + of_node_put(np); + + np = of_find_matching_node(NULL, rtc_match); + if (!np) { + pr_err("Failed to find RTC DT node\n"); + BUG(); + } + + rtc_base = of_iomap(np, 0); + if (!rtc_base) { + pr_err("Can't map RTC registers"); + BUG(); + } + /* * rtc registers are used by read_persistent_clock, keep the rtc clock * enabled @@ -202,6 +226,8 @@ static void __init tegra_init_timer(void) else clk_prepare_enable(clk); + of_node_put(np); + switch (rate) { case 12000000: timer_writel(0x000b, TIMERUS_USEC_CFG); @@ -223,13 +249,13 @@ static void __init tegra_init_timer(void) if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US, "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) { - printk(KERN_ERR "Failed to register clocksource\n"); + pr_err("Failed to register clocksource\n"); BUG(); } ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq); if (ret) { - printk(KERN_ERR "Failed to register timer IRQ: %d\n", ret); + pr_err("Failed to register timer IRQ: %d\n", ret); BUG(); } @@ -241,7 +267,9 @@ static void __init tegra_init_timer(void) tegra_clockevent.cpumask = cpu_all_mask; tegra_clockevent.irq = tegra_timer_irq.irq; clockevents_register_device(&tegra_clockevent); - tegra_twd_init(); +#ifdef CONFIG_HAVE_ARM_TWD + twd_local_timer_of_register(); +#endif register_persistent_clock(NULL, tegra_read_persistent_clock); } diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index d8632ebb1eaf..12f3994c43db 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1443,8 +1443,6 @@ static struct platform_device pinctrl_device = { static struct u300_gpio_platform u300_gpio_plat = { .ports = 7, .gpio_base = 0, - .gpio_irq_base = IRQ_U300_GPIO_BASE, - .pinctrl_device = &pinctrl_device, }; static struct platform_device gpio_device = { @@ -1588,6 +1586,7 @@ static struct platform_device *platform_devs[] __initdata = { &i2c1_device, &keypad_device, &rtc_device, + &pinctrl_device, &gpio_device, &nand_device, &wdog_device, @@ -1802,7 +1801,7 @@ MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ .atag_offset = 0x100, .map_io = u300_map_io, - .nr_irqs = NR_IRQS_U300, + .nr_irqs = 0, .init_irq = u300_init_irq, .handle_irq = vic_handle_irq, .timer = &u300_timer, diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index e27425a63fa1..21d5e76a6cd3 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -12,79 +12,69 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define IRQ_U300_INTCON0_START 1 -#define IRQ_U300_INTCON1_START 33 +#define IRQ_U300_INTCON0_START 32 +#define IRQ_U300_INTCON1_START 64 /* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 1 -#define IRQ_U300_IRQ1_EXT 2 -#define IRQ_U300_DMA 3 -#define IRQ_U300_VIDEO_ENC_0 4 -#define IRQ_U300_VIDEO_ENC_1 5 -#define IRQ_U300_AAIF_RX 6 -#define IRQ_U300_AAIF_TX 7 -#define IRQ_U300_AAIF_VGPIO 8 -#define IRQ_U300_AAIF_WAKEUP 9 -#define IRQ_U300_PCM_I2S0_FRAME 10 -#define IRQ_U300_PCM_I2S0_FIFO 11 -#define IRQ_U300_PCM_I2S1_FRAME 12 -#define IRQ_U300_PCM_I2S1_FIFO 13 -#define IRQ_U300_XGAM_GAMCON 14 -#define IRQ_U300_XGAM_CDI 15 -#define IRQ_U300_XGAM_CDICON 16 -#define IRQ_U300_XGAM_PDI 18 -#define IRQ_U300_XGAM_PDICON 19 -#define IRQ_U300_XGAM_GAMEACC 20 -#define IRQ_U300_XGAM_MCIDCT 21 -#define IRQ_U300_APEX 22 -#define IRQ_U300_UART0 23 -#define IRQ_U300_SPI 24 -#define IRQ_U300_TIMER_APP_OS 25 -#define IRQ_U300_TIMER_APP_DD 26 -#define IRQ_U300_TIMER_APP_GP1 27 -#define IRQ_U300_TIMER_APP_GP2 28 -#define IRQ_U300_TIMER_OS 29 -#define IRQ_U300_TIMER_MS 30 -#define IRQ_U300_KEYPAD_KEYBF 31 -#define IRQ_U300_KEYPAD_KEYBR 32 +#define IRQ_U300_IRQ0_EXT 32 +#define IRQ_U300_IRQ1_EXT 33 +#define IRQ_U300_DMA 34 +#define IRQ_U300_VIDEO_ENC_0 35 +#define IRQ_U300_VIDEO_ENC_1 36 +#define IRQ_U300_AAIF_RX 37 +#define IRQ_U300_AAIF_TX 38 +#define IRQ_U300_AAIF_VGPIO 39 +#define IRQ_U300_AAIF_WAKEUP 40 +#define IRQ_U300_PCM_I2S0_FRAME 41 +#define IRQ_U300_PCM_I2S0_FIFO 42 +#define IRQ_U300_PCM_I2S1_FRAME 43 +#define IRQ_U300_PCM_I2S1_FIFO 44 +#define IRQ_U300_XGAM_GAMCON 45 +#define IRQ_U300_XGAM_CDI 46 +#define IRQ_U300_XGAM_CDICON 47 +#define IRQ_U300_XGAM_PDI 49 +#define IRQ_U300_XGAM_PDICON 50 +#define IRQ_U300_XGAM_GAMEACC 51 +#define IRQ_U300_XGAM_MCIDCT 52 +#define IRQ_U300_APEX 53 +#define IRQ_U300_UART0 54 +#define IRQ_U300_SPI 55 +#define IRQ_U300_TIMER_APP_OS 56 +#define IRQ_U300_TIMER_APP_DD 57 +#define IRQ_U300_TIMER_APP_GP1 58 +#define IRQ_U300_TIMER_APP_GP2 59 +#define IRQ_U300_TIMER_OS 60 +#define IRQ_U300_TIMER_MS 61 +#define IRQ_U300_KEYPAD_KEYBF 62 +#define IRQ_U300_KEYPAD_KEYBR 63 /* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 33 -#define IRQ_U300_GPIO_PORT1 34 -#define IRQ_U300_GPIO_PORT2 35 +#define IRQ_U300_GPIO_PORT0 64 +#define IRQ_U300_GPIO_PORT1 65 +#define IRQ_U300_GPIO_PORT2 66 /* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 36 -#define IRQ_U300_EVHIST 37 -#define IRQ_U300_MSPRO 38 -#define IRQ_U300_MMCSD_MCIINTR0 39 -#define IRQ_U300_MMCSD_MCIINTR1 40 -#define IRQ_U300_I2C0 41 -#define IRQ_U300_I2C1 42 -#define IRQ_U300_RTC 43 -#define IRQ_U300_NFIF 44 -#define IRQ_U300_NFIF2 45 +#define IRQ_U300_WDOG 67 +#define IRQ_U300_EVHIST 68 +#define IRQ_U300_MSPRO 69 +#define IRQ_U300_MMCSD_MCIINTR0 70 +#define IRQ_U300_MMCSD_MCIINTR1 71 +#define IRQ_U300_I2C0 72 +#define IRQ_U300_I2C1 73 +#define IRQ_U300_RTC 74 +#define IRQ_U300_NFIF 75 +#define IRQ_U300_NFIF2 76 /* The DB3350-specific interrupt lines */ -#define IRQ_U300_ISP_F0 46 -#define IRQ_U300_ISP_F1 47 -#define IRQ_U300_ISP_F2 48 -#define IRQ_U300_ISP_F3 49 -#define IRQ_U300_ISP_F4 50 -#define IRQ_U300_GPIO_PORT3 51 -#define IRQ_U300_SYSCON_PLL_LOCK 52 -#define IRQ_U300_UART1 53 -#define IRQ_U300_GPIO_PORT4 54 -#define IRQ_U300_GPIO_PORT5 55 -#define IRQ_U300_GPIO_PORT6 56 -#define U300_VIC_IRQS_END 57 - -/* Maximum 8*7 GPIO lines */ -#ifdef CONFIG_PINCTRL_COH901 -#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END) -#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56) -#else -#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) -#endif - -#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) +#define IRQ_U300_ISP_F0 77 +#define IRQ_U300_ISP_F1 78 +#define IRQ_U300_ISP_F2 79 +#define IRQ_U300_ISP_F3 80 +#define IRQ_U300_ISP_F4 81 +#define IRQ_U300_GPIO_PORT3 82 +#define IRQ_U300_SYSCON_PLL_LOCK 83 +#define IRQ_U300_UART1 84 +#define IRQ_U300_GPIO_PORT4 85 +#define IRQ_U300_GPIO_PORT5 86 +#define IRQ_U300_GPIO_PORT6 87 +#define U300_VIC_IRQS_END 88 #endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index e8c3f0d70ca6..5dea90636d94 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -7,8 +7,8 @@ config UX500_SOC_COMMON select ARM_ERRATA_764369 if SMP select ARM_GIC select CACHE_L2X0 + select CLKSRC_NOMADIK_MTU select COMMON_CLK - select HAS_MTU select PINCTRL select PINCTRL_NOMADIK select PL310_ERRATA_753970 if CACHE_PL310 diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 7adbed5df8a1..7209db7cdc72 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -7,10 +7,8 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/gpio.h> - -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> -#include <plat/ste_dma40.h> +#include <linux/platform_data/pinctrl-nomadik.h> +#include <linux/platform_data/dma-ste-dma40.h> #include <mach/devices.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index a267c6d30e37..c34d4efd0d5c 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -9,10 +9,9 @@ #include <linux/bug.h> #include <linux/string.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> -#include <plat/pincfg.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 9c8e4a9e83ee..051b62c27102 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -11,9 +11,9 @@ #include <linux/amba/mmci.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> +#include <linux/platform_data/dma-ste-dma40.h> #include <asm/mach-types.h> -#include <plat/ste_dma40.h> #include <mach/devices.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index daa4237ac0dc..d453522edb0d 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -1,6 +1,5 @@ - /* - * Copyright (C) 2008-2009 ST-Ericsson + * Copyright (C) 2008-2012 ST-Ericsson * * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> * @@ -16,6 +15,7 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-nomadik.h> +#include <linux/platform_data/db8500_thermal.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> @@ -35,14 +35,13 @@ #include <linux/delay.h> #include <linux/leds.h> #include <linux/pinctrl/consumer.h> +#include <linux/platform_data/pinctrl-nomadik.h> +#include <linux/platform_data/dma-ste-dma40.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> -#include <plat/ste_dma40.h> -#include <plat/gpio-nomadik.h> - #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> @@ -227,6 +226,67 @@ static struct ab8500_platform_data ab8500_platdata = { }; /* + * Thermal Sensor + */ + +static struct resource db8500_thsens_resources[] = { + { + .name = "IRQ_HOTMON_LOW", + .start = IRQ_PRCMU_HOTMON_LOW, + .end = IRQ_PRCMU_HOTMON_LOW, + .flags = IORESOURCE_IRQ, + }, + { + .name = "IRQ_HOTMON_HIGH", + .start = IRQ_PRCMU_HOTMON_HIGH, + .end = IRQ_PRCMU_HOTMON_HIGH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct db8500_thsens_platform_data db8500_thsens_data = { + .trip_points[0] = { + .temp = 70000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[1] = { + .temp = 75000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[2] = { + .temp = 80000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[3] = { + .temp = 85000, + .type = THERMAL_TRIP_CRITICAL, + }, + .num_trips = 4, +}; + +static struct platform_device u8500_thsens_device = { + .name = "db8500-thermal", + .resource = db8500_thsens_resources, + .num_resources = ARRAY_SIZE(db8500_thsens_resources), + .dev = { + .platform_data = &db8500_thsens_data, + }, +}; + +static struct platform_device u8500_cpufreq_cooling_device = { + .name = "db8500-cpufreq-cooling", +}; + +/* * TPS61052 */ @@ -581,6 +641,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &snowball_gpio_en_3v3_regulator_dev, + &u8500_thsens_device, + &u8500_cpufreq_cooling_device, }; static void __init mop500_init_machine(void) @@ -695,6 +757,16 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .init_late = ux500_init_late, MACHINE_END +MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520") + .atag_offset = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + .timer = &ux500_timer, + .handle_irq = gic_handle_irq, + .init_machine = mop500_init_machine, + .init_late = ux500_init_late, +MACHINE_END + MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .atag_offset = 0x100, .smp = smp_ops(ux500_smp_ops), diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 4c6ce012daef..db0bb75e2c76 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -21,17 +21,19 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/regulator/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> +#include <linux/random.h> #include <asm/pmu.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> -#include <plat/gpio-nomadik.h> + #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> -#include <linux/platform_data/usb-musb-ux500.h> #include <mach/db8500-regs.h> +#include <mach/irqs.h> #include "devices-db8500.h" #include "ste-dma40-db8500.h" @@ -165,7 +167,7 @@ static void __init db8500_add_gpios(struct device *parent) dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); - dbx500_add_pinctrl(parent, "pinctrl-db8500"); + dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); } static int usb_db8500_rx_dma_cfg[] = { @@ -194,6 +196,8 @@ static const char *db8500_read_soc_id(void) { void __iomem *uid = __io_address(U8500_BB_UID_BASE); + /* Throw these device-specific numbers into the entropy pool */ + add_device_randomness(uid, 0x14); return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", readl((u32 *)uid+1), readl((u32 *)uid+1), readl((u32 *)uid+2), @@ -221,9 +225,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) db8500_add_gpios(parent); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-ux500", -1, NULL, 0); - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; @@ -243,9 +244,6 @@ static struct device * __init u8500_of_init_devices(void) db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-ux500", -1, NULL, 0); - u8500_dma40_device.dev.parent = parent; /* diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index dfdd4a54668d..16b5f71e6974 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -11,10 +11,10 @@ #include <linux/irq.h> #include <linux/slab.h> #include <linux/platform_device.h> - -#include <plat/gpio-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include "devices-common.h" diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 7fbf0ba336e1..96fa4ac89e2e 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -129,12 +129,18 @@ void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, int irq, struct nmk_gpio_platform_data *pdata); static inline void -dbx500_add_pinctrl(struct device *parent, const char *name) +dbx500_add_pinctrl(struct device *parent, const char *name, + resource_size_t base) { + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_8K), + }; struct platform_device_info pdevinfo = { .parent = parent, .name = name, .id = -1, + .res = res, + .num_res = ARRAY_SIZE(res), }; platform_device_register_full(&pdevinfo); diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 91754a8a0d49..318d49020894 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -12,11 +12,11 @@ #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> - -#include <plat/ste_dma40.h> +#include <linux/platform_data/dma-ste-dma40.h> #include <mach/hardware.h> #include <mach/setup.h> +#include <mach/irqs.h> #include "ste-dma40-db8500.h" diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 3c8010f4fb3f..4b24c9992654 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -8,6 +8,7 @@ #ifndef __DEVICES_DB8500_H #define __DEVICES_DB8500_H +#include <mach/irqs.h> #include "devices-common.h" struct ske_keypad_platform_data; diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index e8928548b6a3..fc77b4274c8d 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -46,6 +46,6 @@ #include <mach/irqs-board-mop500.h> #endif -#define NR_IRQS IRQ_BOARD_END +#define UX500_NR_IRQS IRQ_BOARD_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h index 3cc7142eee02..9991aea3d577 100644 --- a/arch/arm/mach-ux500/include/mach/msp.h +++ b/arch/arm/mach-ux500/include/mach/msp.h @@ -8,7 +8,7 @@ #ifndef __MSP_H #define __MSP_H -#include <plat/ste_dma40.h> +#include <linux/platform_data/dma-ste-dma40.h> enum msp_i2s_id { MSP_I2S_0 = 0, diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 6f39731951b0..875309acb022 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -9,11 +9,10 @@ #include <linux/clksrc-dbx500-prcmu.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/platform_data/clocksource-nomadik-mtu.h> #include <asm/smp_twd.h> -#include <plat/mtu.h> - #include <mach/setup.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -96,7 +95,7 @@ dt_fail: * */ - nmdk_timer_init(mtu_timer_base); + nmdk_timer_init(mtu_timer_base, IRQ_MTU0); clksrc_dbx500_prcmu_init(prcmu_timer_base); ux500_twd_init(); } diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 145482e74418..78ac65f62e87 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -7,10 +7,10 @@ #include <linux/platform_device.h> #include <linux/usb/musb.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/usb-musb-ux500.h> +#include <linux/platform_data/dma-ste-dma40.h> -#include <plat/ste_dma40.h> #include <mach/hardware.h> -#include <linux/platform_data/usb-musb-ux500.h> #define MUSB_DMA40_RX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 5b5c1eeb5b5c..5d5929450366 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -32,6 +32,7 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/irqchip/versatile-fpga.h> #include <linux/gfp.h> #include <linux/clkdev.h> #include <linux/mtd/physmap.h> @@ -51,7 +52,6 @@ #include <asm/hardware/timer-sp.h> #include <plat/clcd.h> -#include <plat/fpga-irq.h> #include <plat/sched_clock.h> #include "core.h" diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index c95296066203..99e63f5f99d1 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,11 +1,12 @@ config ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 select CLKDEV_LOOKUP select COMMON_CLK + select COMMON_CLK_VERSATILE select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_CLK @@ -17,6 +18,7 @@ config ARCH_VEXPRESS select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select REGULATOR_FIXED_VOLTAGE if REGULATOR + select VEXPRESS_CONFIG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 42703e8b4d3b..80b64971fbdd 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,7 +4,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-versatile/include -obj-y := v2m.o +obj-y := v2m.o reset.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 4f471fa3e3c5..60838ddb8564 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -9,6 +9,7 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/clkdev.h> +#include <linux/vexpress.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/cache-l2x0.h> @@ -64,19 +65,6 @@ static void __init ct_ca9x4_init_irq(void) ca9x4_twd_init(); } -static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) -{ - u32 site = v2m_get_master_site(); - - /* - * Old firmware was using the "site" component of the command - * to control the DVI muxer (while it should be always 0 ie. MB). - * Newer firmware uses the data register. Keep both for compatibility. - */ - v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site); - v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2); -} - static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) { unsigned long framesize = 1024 * 768 * 2; @@ -93,7 +81,6 @@ static struct clcd_board ct_ca9x4_clcd_data = { .caps = CLCD_CAP_5551 | CLCD_CAP_565, .check = clcdfb_check, .decode = clcdfb_decode, - .enable = ct_ca9x4_clcd_enable, .setup = ct_ca9x4_clcd_setup, .mmap = versatile_clcd_mmap_dma, .remove = versatile_clcd_remove_dma, @@ -111,14 +98,6 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { &gpio_device, }; - -static struct v2m_osc ct_osc1 = { - .osc = 1, - .rate_min = 10000000, - .rate_max = 80000000, - .rate_default = 23750000, -}; - static struct resource pmu_resources[] = { [0] = { .start = IRQ_CT_CA9X4_PMU_CPU0, @@ -149,10 +128,18 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static struct platform_device osc1_device = { + .name = "vexpress-osc", + .id = 1, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0xf, 1), + }, +}; + static void __init ct_ca9x4_init(void) { int i; - struct clk *clk; #ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); @@ -164,14 +151,14 @@ static void __init ct_ca9x4_init(void) l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif - ct_osc1.site = v2m_get_master_site(); - clk = v2m_osc_register("ct:osc1", &ct_osc1); - clk_register_clkdev(clk, NULL, "ct:clcd"); - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); platform_device_register(&pmu_device); + platform_device_register(&osc1_device); + + WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev), + NULL, "ct:clcd")); } #ifdef CONFIG_SMP diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h index 1e388c7bf4d7..68abc8b72781 100644 --- a/arch/arm/mach-vexpress/include/mach/motherboard.h +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -1,8 +1,6 @@ #ifndef __MACH_MOTHERBOARD_H #define __MACH_MOTHERBOARD_H -#include <linux/clk-provider.h> - /* * Physical addresses, offset from V2M_PA_CS0-3 */ @@ -41,31 +39,6 @@ #define V2M_CF (V2M_PA_CS7 + 0x0001a000) #define V2M_CLCD (V2M_PA_CS7 + 0x0001f000) -/* - * Offsets from SYSREGS base - */ -#define V2M_SYS_ID 0x000 -#define V2M_SYS_SW 0x004 -#define V2M_SYS_LED 0x008 -#define V2M_SYS_100HZ 0x024 -#define V2M_SYS_FLAGS 0x030 -#define V2M_SYS_FLAGSSET 0x030 -#define V2M_SYS_FLAGSCLR 0x034 -#define V2M_SYS_NVFLAGS 0x038 -#define V2M_SYS_NVFLAGSSET 0x038 -#define V2M_SYS_NVFLAGSCLR 0x03c -#define V2M_SYS_MCI 0x048 -#define V2M_SYS_FLASH 0x03c -#define V2M_SYS_CFGSW 0x058 -#define V2M_SYS_24MHZ 0x05c -#define V2M_SYS_MISC 0x060 -#define V2M_SYS_DMA 0x064 -#define V2M_SYS_PROCID0 0x084 -#define V2M_SYS_PROCID1 0x088 -#define V2M_SYS_CFGDATA 0x0a0 -#define V2M_SYS_CFGCTRL 0x0a4 -#define V2M_SYS_CFGSTAT 0x0a8 - /* * Interrupts. Those in {} are for AMBA devices @@ -91,43 +64,6 @@ /* - * Configuration - */ -#define SYS_CFG_START (1 << 31) -#define SYS_CFG_WRITE (1 << 30) -#define SYS_CFG_OSC (1 << 20) -#define SYS_CFG_VOLT (2 << 20) -#define SYS_CFG_AMP (3 << 20) -#define SYS_CFG_TEMP (4 << 20) -#define SYS_CFG_RESET (5 << 20) -#define SYS_CFG_SCC (6 << 20) -#define SYS_CFG_MUXFPGA (7 << 20) -#define SYS_CFG_SHUTDOWN (8 << 20) -#define SYS_CFG_REBOOT (9 << 20) -#define SYS_CFG_DVIMODE (11 << 20) -#define SYS_CFG_POWER (12 << 20) -#define SYS_CFG_SITE(n) ((n) << 16) -#define SYS_CFG_SITE_MB 0 -#define SYS_CFG_SITE_DB1 1 -#define SYS_CFG_SITE_DB2 2 -#define SYS_CFG_STACK(n) ((n) << 12) - -#define SYS_CFG_ERR (1 << 1) -#define SYS_CFG_COMPLETE (1 << 0) - -int v2m_cfg_write(u32 devfn, u32 data); -int v2m_cfg_read(u32 devfn, u32 *data); -void v2m_flags_set(u32 data); - -/* - * Miscellaneous - */ -#define SYS_MISC_MASTERSITE (1 << 14) -#define SYS_PROCIDx_HBI_MASK 0xfff - -int v2m_get_master_site(void); - -/* * Core tile IDs */ #define V2M_CT_ID_CA9 0x0c000191 @@ -149,21 +85,4 @@ struct ct_desc { extern struct ct_desc *ct_desc; -/* - * OSC clock provider - */ -struct v2m_osc { - struct clk_hw hw; - u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */ - u8 stack; /* board stack position */ - u16 osc; - unsigned long rate_min; - unsigned long rate_max; - unsigned long rate_default; -}; - -#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw) - -struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc); - #endif diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 7db27c8c05cc..c5d70de9bb4e 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <linux/io.h> #include <linux/of_fdt.h> +#include <linux/vexpress.h> #include <asm/smp_scu.h> #include <asm/hardware/gic.h> @@ -193,7 +194,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - v2m_flags_set(virt_to_phys(versatile_secondary_startup)); + vexpress_flags_set(virt_to_phys(versatile_secondary_startup)); } struct smp_operations __initdata vexpress_smp_ops = { diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 560e0df728f8..011661a6c5cb 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -16,11 +16,10 @@ #include <linux/smsc911x.h> #include <linux/spinlock.h> #include <linux/usb/isp1760.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> #include <linux/mtd/physmap.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> +#include <linux/vexpress.h> #include <asm/arch_timer.h> #include <asm/mach-types.h> @@ -33,7 +32,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> #include <asm/hardware/timer-sp.h> -#include <asm/hardware/sp810.h> #include <mach/ct-ca9x4.h> #include <mach/motherboard.h> @@ -58,22 +56,6 @@ static struct map_desc v2m_io_desc[] __initdata = { }, }; -static void __iomem *v2m_sysreg_base; - -static void __init v2m_sysctl_init(void __iomem *base) -{ - u32 scctrl; - - if (WARN_ON(!base)) - return; - - /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ - scctrl = readl(base + SCCTRL); - scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; - scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; - writel(scctrl, base + SCCTRL); -} - static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) { if (WARN_ON(!base || irq == NO_IRQ)) @@ -87,69 +69,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) } -static DEFINE_SPINLOCK(v2m_cfg_lock); - -int v2m_cfg_write(u32 devfn, u32 data) -{ - /* Configuration interface broken? */ - u32 val; - - printk("%s: writing %08x to %08x\n", __func__, data, devfn); - - devfn |= SYS_CFG_START | SYS_CFG_WRITE; - - spin_lock(&v2m_cfg_lock); - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT); - - writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA); - writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); - - do { - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - } while (val == 0); - spin_unlock(&v2m_cfg_lock); - - return !!(val & SYS_CFG_ERR); -} - -int v2m_cfg_read(u32 devfn, u32 *data) -{ - u32 val; - - devfn |= SYS_CFG_START; - - spin_lock(&v2m_cfg_lock); - writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); - - mb(); - - do { - cpu_relax(); - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - } while (val == 0); - - *data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA); - spin_unlock(&v2m_cfg_lock); - - return !!(val & SYS_CFG_ERR); -} - -void __init v2m_flags_set(u32 data) -{ - writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR); - writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET); -} - -int v2m_get_master_site(void) -{ - u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); - - return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1; -} - - static struct resource v2m_pcie_i2c_resource = { .start = V2M_SERIAL_BUS_PCI, .end = V2M_SERIAL_BUS_PCI + SZ_4K - 1, @@ -237,14 +156,8 @@ static struct platform_device v2m_usb_device = { .dev.platform_data = &v2m_usb_config, }; -static void v2m_flash_set_vpp(struct platform_device *pdev, int on) -{ - writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH); -} - static struct physmap_flash_data v2m_flash_data = { .width = 4, - .set_vpp = v2m_flash_set_vpp, }; static struct resource v2m_flash_resources[] = { @@ -291,14 +204,61 @@ static struct platform_device v2m_cf_device = { .dev.platform_data = &v2m_pata_data, }; -static unsigned int v2m_mmci_status(struct device *dev) -{ - return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0); -} - static struct mmci_platform_data v2m_mmci_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = v2m_mmci_status, + .gpio_wp = VEXPRESS_GPIO_MMC_WPROT, + .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN, +}; + +static struct resource v2m_sysreg_resources[] = { + { + .start = V2M_SYSREGS, + .end = V2M_SYSREGS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_sysreg_device = { + .name = "vexpress-sysreg", + .id = -1, + .resource = v2m_sysreg_resources, + .num_resources = ARRAY_SIZE(v2m_sysreg_resources), +}; + +static struct platform_device v2m_muxfpga_device = { + .name = "vexpress-muxfpga", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 7), + } +}; + +static struct platform_device v2m_shutdown_device = { + .name = "vexpress-shutdown", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 8), + } +}; + +static struct platform_device v2m_reboot_device = { + .name = "vexpress-reboot", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 9), + } +}; + +static struct platform_device v2m_dvimode_device = { + .name = "vexpress-dvimode", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 11), + } }; static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL); @@ -325,123 +285,9 @@ static struct amba_device *v2m_amba_devs[] __initdata = { &rtc_device, }; - -static unsigned long v2m_osc_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - return !parent_rate ? osc->rate_default : parent_rate; -} - -static long v2m_osc_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - if (WARN_ON(rate < osc->rate_min)) - rate = osc->rate_min; - - if (WARN_ON(rate > osc->rate_max)) - rate = osc->rate_max; - - return rate; -} - -static int v2m_osc_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(osc->site) | - SYS_CFG_STACK(osc->stack) | osc->osc, rate); - - return 0; -} - -static struct clk_ops v2m_osc_ops = { - .recalc_rate = v2m_osc_recalc_rate, - .round_rate = v2m_osc_round_rate, - .set_rate = v2m_osc_set_rate, -}; - -struct clk * __init v2m_osc_register(const char *name, struct v2m_osc *osc) -{ - struct clk_init_data init; - - WARN_ON(osc->site > 2); - WARN_ON(osc->stack > 15); - WARN_ON(osc->osc > 4095); - - init.name = name; - init.ops = &v2m_osc_ops; - init.flags = CLK_IS_ROOT; - init.num_parents = 0; - - osc->hw.init = &init; - - return clk_register(NULL, &osc->hw); -} - -static struct v2m_osc v2m_mb_osc1 = { - .site = SYS_CFG_SITE_MB, - .osc = 1, - .rate_min = 23750000, - .rate_max = 63500000, - .rate_default = 23750000, -}; - -static const char *v2m_ref_clk_periphs[] __initconst = { - "mb:wdt", "1000f000.wdt", "1c0f0000.wdt", /* SP805 WDT */ -}; - -static const char *v2m_osc1_periphs[] __initconst = { - "mb:clcd", "1001f000.clcd", "1c1f0000.clcd", /* PL111 CLCD */ -}; - -static const char *v2m_osc2_periphs[] __initconst = { - "mb:mmci", "10005000.mmci", "1c050000.mmci", /* PL180 MMCI */ - "mb:kmi0", "10006000.kmi", "1c060000.kmi", /* PL050 KMI0 */ - "mb:kmi1", "10007000.kmi", "1c070000.kmi", /* PL050 KMI1 */ - "mb:uart0", "10009000.uart", "1c090000.uart", /* PL011 UART0 */ - "mb:uart1", "1000a000.uart", "1c0a0000.uart", /* PL011 UART1 */ - "mb:uart2", "1000b000.uart", "1c0b0000.uart", /* PL011 UART2 */ - "mb:uart3", "1000c000.uart", "1c0c0000.uart", /* PL011 UART3 */ -}; - -static void __init v2m_clk_init(void) -{ - struct clk *clk; - int i; - - clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL, - CLK_IS_ROOT, 0); - WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL)); - - clk = clk_register_fixed_rate(NULL, "mb:ref_clk", NULL, - CLK_IS_ROOT, 32768); - for (i = 0; i < ARRAY_SIZE(v2m_ref_clk_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_ref_clk_periphs[i])); - - clk = clk_register_fixed_rate(NULL, "mb:sp804_clk", NULL, - CLK_IS_ROOT, 1000000); - WARN_ON(clk_register_clkdev(clk, "v2m-timer0", "sp804")); - WARN_ON(clk_register_clkdev(clk, "v2m-timer1", "sp804")); - - clk = v2m_osc_register("mb:osc1", &v2m_mb_osc1); - for (i = 0; i < ARRAY_SIZE(v2m_osc1_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc1_periphs[i])); - - clk = clk_register_fixed_rate(NULL, "mb:osc2", NULL, - CLK_IS_ROOT, 24000000); - for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i])); -} - static void __init v2m_timer_init(void) { - v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); - v2m_clk_init(); + vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K)); v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); } @@ -453,19 +299,7 @@ static void __init v2m_init_early(void) { if (ct_desc->init_early) ct_desc->init_early(); - versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); -} - -static void v2m_power_off(void) -{ - if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) - printk(KERN_EMERG "Unable to shutdown\n"); -} - -static void v2m_restart(char str, const char *cmd) -{ - if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) - printk(KERN_EMERG "Unable to reboot\n"); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); } struct ct_desc *ct_desc; @@ -482,7 +316,7 @@ static void __init v2m_populate_ct_desc(void) u32 current_tile_id; ct_desc = NULL; - current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0) + current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER) & V2M_CT_ID_MASK; for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i) @@ -498,7 +332,7 @@ static void __init v2m_populate_ct_desc(void) static void __init v2m_map_io(void) { iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); - v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K); + vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K)); v2m_populate_ct_desc(); ct_desc->map_io(); } @@ -515,6 +349,12 @@ static void __init v2m_init(void) regulator_register_fixed(0, v2m_eth_supplies, ARRAY_SIZE(v2m_eth_supplies)); + platform_device_register(&v2m_muxfpga_device); + platform_device_register(&v2m_shutdown_device); + platform_device_register(&v2m_reboot_device); + platform_device_register(&v2m_dvimode_device); + + platform_device_register(&v2m_sysreg_device); platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); @@ -525,7 +365,7 @@ static void __init v2m_init(void) for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) amba_device_register(v2m_amba_devs[i], &iomem_resource); - pm_power_off = v2m_power_off; + pm_power_off = vexpress_power_off; ct_desc->init_tile(); } @@ -539,7 +379,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .timer = &v2m_timer, .handle_irq = gic_handle_irq, .init_machine = v2m_init, - .restart = v2m_restart, + .restart = vexpress_restart, MACHINE_END static struct map_desc v2m_rs1_io_desc __initdata = { @@ -580,20 +420,13 @@ void __init v2m_dt_map_io(void) void __init v2m_dt_init_early(void) { - struct device_node *node; u32 dt_hbi; - node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg"); - v2m_sysreg_base = of_iomap(node, 0); - if (WARN_ON(!v2m_sysreg_base)) - return; + vexpress_sysreg_of_early_init(); /* Confirm board type against DT property, if available */ - if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { - int site = v2m_get_master_site(); - u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ? - V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); - u32 hbi = id & SYS_PROCIDx_HBI_MASK; + if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { + u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER); if (WARN_ON(dt_hbi != hbi)) pr_warning("vexpress: DT HBI (%x) is not matching " @@ -613,51 +446,47 @@ static void __init v2m_dt_init_irq(void) static void __init v2m_dt_timer_init(void) { - struct device_node *node; - const char *path; - int err; + struct device_node *node = NULL; - node = of_find_compatible_node(NULL, NULL, "arm,sp810"); - v2m_sysctl_init(of_iomap(node, 0)); + vexpress_clk_of_init(); - v2m_clk_init(); + do { + node = of_find_compatible_node(node, NULL, "arm,sp804"); + } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB); + if (node) { + pr_info("Using SP804 '%s' as a clock & events source\n", + node->full_name); + v2m_sp804_init(of_iomap(node, 0), + irq_of_parse_and_map(node, 0)); + } - err = of_property_read_string(of_aliases, "arm,v2m_timer", &path); - if (WARN_ON(err)) - return; - node = of_find_node_by_path(path); - v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0)); if (arch_timer_of_register() != 0) twd_local_timer_of_register(); if (arch_timer_sched_clock_init() != 0) - versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), + 24000000); } static struct sys_timer v2m_dt_timer = { .init = v2m_dt_timer_init, }; -static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash", - &v2m_flash_data), - OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data), - /* RS1 memory map */ - OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash", - &v2m_flash_data), - OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data), +static const struct of_device_id v2m_dt_bus_match[] __initconst = { + { .compatible = "simple-bus", }, + { .compatible = "arm,amba-bus", }, + { .compatible = "arm,vexpress,config-bus", }, {} }; static void __init v2m_dt_init(void) { l2x0_of_init(0x00400000, 0xfe0fffff); - of_platform_populate(NULL, of_default_bus_match_table, - v2m_dt_auxdata_lookup, NULL); - pm_power_off = v2m_power_off; + of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); + pm_power_off = vexpress_power_off; } -const static char *v2m_dt_match[] __initconst = { +static const char * const v2m_dt_match[] __initconst = { "arm,vexpress", "xen,xenvm", NULL, @@ -672,5 +501,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .timer = &v2m_dt_timer, .init_machine = v2m_dt_init, .handle_irq = gic_handle_irq, - .restart = v2m_restart, + .restart = vexpress_restart, MACHINE_END diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig new file mode 100644 index 000000000000..2ed0b7d95db6 --- /dev/null +++ b/arch/arm/mach-vt8500/Kconfig @@ -0,0 +1,12 @@ +config ARCH_VT8500 + bool "VIA/WonderMedia 85xx" if ARCH_MULTI_V5 + default ARCH_VT8500_SINGLE + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select HAVE_CLK + help + Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h index 2b2419646e95..6f2b843115db 100644 --- a/arch/arm/mach-vt8500/common.h +++ b/arch/arm/mach-vt8500/common.h @@ -25,4 +25,7 @@ int __init vt8500_irq_init(struct device_node *node, /* defined in drivers/clk/clk-vt8500.c */ void __init vtwm_clk_init(void __iomem *pmc_base); +/* defined in irq.c */ +asmlinkage void vt8500_handle_irq(struct pt_regs *regs); + #endif diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S deleted file mode 100644 index 367d1b55fb9a..000000000000 --- a/arch/arm/mach-vt8500/include/mach/entry-macro.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for VIA VT8500 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro get_irqnr_preamble, base, tmp - @ physical 0xd8140000 is virtual 0xf8140000 - mov \base, #0xf8000000 - orr \base, \base, #0x00140000 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base] - cmp \irqnr, #63 @ may be false positive, check interrupt status - bne 1001f - ldr \irqstat, [\base, #0x84] - ands \irqstat, #0x80000000 - moveq \irqnr, #0 -1001: - .endm - diff --git a/arch/arm/mach-vt8500/include/mach/irqs.h b/arch/arm/mach-vt8500/include/mach/irqs.h deleted file mode 100644 index a129fd1222fb..000000000000 --- a/arch/arm/mach-vt8500/include/mach/irqs.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/irqs.h - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* This value is just to make the core happy, never used otherwise */ -#define NR_IRQS 128 diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c index f8f9ab9bc56e..b9cf5ce9efbb 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/arch/arm/mach-vt8500/irq.c @@ -36,7 +36,7 @@ #include <linux/of_address.h> #include <asm/irq.h> - +#include <asm/exception.h> #define VT8500_ICPC_IRQ 0x20 #define VT8500_ICPC_FIQ 0x24 @@ -66,30 +66,34 @@ #define VT8500_EDGE ( VT8500_TRIGGER_RISING \ | VT8500_TRIGGER_FALLING) -static int irq_cnt; +/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */ +#define VT8500_INTC_MAX 2 -struct vt8500_irq_priv { - void __iomem *base; +struct vt8500_irq_data { + void __iomem *base; /* IO Memory base address */ + struct irq_domain *domain; /* Domain for this controller */ }; +/* Global variable for accessing io-mem addresses */ +static struct vt8500_irq_data intc[VT8500_INTC_MAX]; +static u32 active_cnt = 0; + static void vt8500_irq_mask(struct irq_data *d) { - struct vt8500_irq_priv *priv = - (struct vt8500_irq_priv *)(d->domain->host_data); + struct vt8500_irq_data *priv = d->domain->host_data; void __iomem *base = priv->base; - u8 edge; + void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4); + u8 edge, dctr; + u32 status; edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE; if (edge) { - void __iomem *stat_reg = base + VT8500_ICIS - + (d->hwirq < 32 ? 0 : 4); - unsigned status = readl(stat_reg); + status = readl(stat_reg); status |= (1 << (d->hwirq & 0x1f)); writel(status, stat_reg); } else { - u8 dctr = readb(base + VT8500_ICDC + d->hwirq); - + dctr = readb(base + VT8500_ICDC + d->hwirq); dctr &= ~VT8500_INT_ENABLE; writeb(dctr, base + VT8500_ICDC + d->hwirq); } @@ -97,8 +101,7 @@ static void vt8500_irq_mask(struct irq_data *d) static void vt8500_irq_unmask(struct irq_data *d) { - struct vt8500_irq_priv *priv = - (struct vt8500_irq_priv *)(d->domain->host_data); + struct vt8500_irq_data *priv = d->domain->host_data; void __iomem *base = priv->base; u8 dctr; @@ -109,8 +112,7 @@ static void vt8500_irq_unmask(struct irq_data *d) static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) { - struct vt8500_irq_priv *priv = - (struct vt8500_irq_priv *)(d->domain->host_data); + struct vt8500_irq_data *priv = d->domain->host_data; void __iomem *base = priv->base; u8 dctr; @@ -148,17 +150,15 @@ static struct irq_chip vt8500_irq_chip = { static void __init vt8500_init_irq_hw(void __iomem *base) { - unsigned int i; + u32 i; /* Enable rotating priority for IRQ */ writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ); writel(0x00, base + VT8500_ICPC_FIQ); - for (i = 0; i < 64; i++) { - /* Disable all interrupts and route them to IRQ */ - writeb(VT8500_INT_DISABLE | ICDC_IRQ, - base + VT8500_ICDC + i); - } + /* Disable all interrupts and route them to IRQ */ + for (i = 0; i < 64; i++) + writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i); } static int vt8500_irq_map(struct irq_domain *h, unsigned int virq, @@ -175,33 +175,67 @@ static struct irq_domain_ops vt8500_irq_domain_ops = { .xlate = irq_domain_xlate_onecell, }; +asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs) +{ + u32 stat, i; + int irqnr, virq; + void __iomem *base; + + /* Loop through each active controller */ + for (i=0; i<active_cnt; i++) { + base = intc[i].base; + irqnr = readl_relaxed(base) & 0x3F; + /* + Highest Priority register default = 63, so check that this + is a real interrupt by checking the status register + */ + if (irqnr == 63) { + stat = readl_relaxed(base + VT8500_ICIS + 4); + if (!(stat & BIT(31))) + continue; + } + + virq = irq_find_mapping(intc[i].domain, irqnr); + handle_IRQ(virq, regs); + } +} + int __init vt8500_irq_init(struct device_node *node, struct device_node *parent) { - struct irq_domain *vt8500_irq_domain; - struct vt8500_irq_priv *priv; int irq, i; struct device_node *np = node; - priv = kzalloc(sizeof(struct vt8500_irq_priv), GFP_KERNEL); - priv->base = of_iomap(np, 0); + if (active_cnt == VT8500_INTC_MAX) { + pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n", + __func__); + goto out; + } + + intc[active_cnt].base = of_iomap(np, 0); + intc[active_cnt].domain = irq_domain_add_linear(node, 64, + &vt8500_irq_domain_ops, &intc[active_cnt]); - vt8500_irq_domain = irq_domain_add_legacy(node, 64, irq_cnt, 0, - &vt8500_irq_domain_ops, priv); - if (!vt8500_irq_domain) - pr_err("%s: Unable to add wmt irq domain!\n", __func__); + if (!intc[active_cnt].base) { + pr_err("%s: Unable to map IO memory\n", __func__); + goto out; + } + + if (!intc[active_cnt].domain) { + pr_err("%s: Unable to add irq domain!\n", __func__); + goto out; + } - irq_set_default_host(vt8500_irq_domain); + vt8500_init_irq_hw(intc[active_cnt].base); - vt8500_init_irq_hw(priv->base); + pr_info("vt8500-irq: Added interrupt controller\n"); - pr_info("Added IRQ Controller @ %x [virq_base = %d]\n", - (u32)(priv->base), irq_cnt); + active_cnt++; /* check if this is a slaved controller */ if (of_irq_count(np) != 0) { /* check that we have the correct number of interrupts */ if (of_irq_count(np) != 8) { - pr_err("%s: Incorrect IRQ map for slave controller\n", + pr_err("%s: Incorrect IRQ map for slaved controller\n", __func__); return -EINVAL; } @@ -213,9 +247,7 @@ int __init vt8500_irq_init(struct device_node *node, struct device_node *parent) pr_info("vt8500-irq: Enabled slave->parent interrupts\n"); } - - irq_cnt += 64; - +out: return 0; } diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index a5bd28692b06..3c66d48ea082 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -192,5 +192,6 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") .timer = &vt8500_timer, .init_machine = vt8500_init, .restart = vt8500_restart, + .handle_irq = vt8500_handle_irq, MACHINE_END diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig new file mode 100644 index 000000000000..adb6c0ea0e53 --- /dev/null +++ b/arch/arm/mach-zynq/Kconfig @@ -0,0 +1,13 @@ +config ARCH_ZYNQ + bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select COMMON_CLK + select CPU_V7 + select GENERIC_CLOCKEVENTS + select ICST + select MIGHT_HAVE_CACHE_L2X0 + select USE_OF + select SPARSE_IRQ + help + Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 79bf5fb4dad3..e16d4bed0f7a 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -30,10 +30,10 @@ #include <asm/mach/time.h> #include <asm/mach-types.h> #include <asm/page.h> +#include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/zynq_soc.h> #include "common.h" static struct of_device_id zynq_of_bus_ids[] __initdata = { @@ -68,32 +68,15 @@ static void __init xilinx_irq_init(void) of_irq_init(irq_match); } -/* The minimum devices needed to be mapped before the VM system is up and - * running include the GIC, UART and Timer Counter. - */ - -static struct map_desc io_desc[] __initdata = { - { - .virtual = TTC0_VIRT, - .pfn = __phys_to_pfn(TTC0_PHYS), - .length = TTC0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = SCU_PERIPH_VIRT, - .pfn = __phys_to_pfn(SCU_PERIPH_PHYS), - .length = SCU_PERIPH_SIZE, - .type = MT_DEVICE, - }, - -#ifdef CONFIG_DEBUG_LL - { - .virtual = LL_UART_VADDR, - .pfn = __phys_to_pfn(LL_UART_PADDR), - .length = UART_SIZE, - .type = MT_DEVICE, - }, -#endif +#define SCU_PERIPH_PHYS 0xF8F00000 +#define SCU_PERIPH_SIZE SZ_8K +#define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE) +static struct map_desc scu_desc __initdata = { + .virtual = SCU_PERIPH_VIRT, + .pfn = __phys_to_pfn(SCU_PERIPH_PHYS), + .length = SCU_PERIPH_SIZE, + .type = MT_DEVICE, }; static void __init xilinx_zynq_timer_init(void) @@ -122,7 +105,8 @@ static struct sys_timer xttcpss_sys_timer = { */ static void __init xilinx_map_io(void) { - iotable_init(io_desc, ARRAY_SIZE(io_desc)); + debug_ll_io_init(); + iotable_init(&scu_desc, 1); } static const char *xilinx_dt_match[] = { diff --git a/arch/arm/mach-zynq/include/mach/hardware.h b/arch/arm/mach-zynq/include/mach/hardware.h deleted file mode 100644 index d558d8a94be7..000000000000 --- a/arch/arm/mach-zynq/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/hardware.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_HARDWARE_H__ -#define __MACH_HARDWARE_H__ - -#endif diff --git a/arch/arm/mach-zynq/include/mach/irqs.h b/arch/arm/mach-zynq/include/mach/irqs.h deleted file mode 100644 index 5fb04fd3bac8..000000000000 --- a/arch/arm/mach-zynq/include/mach/irqs.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/irqs.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define ARCH_NR_GPIOS 118 -#define NR_IRQS (128 + ARCH_NR_GPIOS) - -#endif diff --git a/arch/arm/mach-zynq/include/mach/timex.h b/arch/arm/mach-zynq/include/mach/timex.h deleted file mode 100644 index 6c0245e42a5e..000000000000 --- a/arch/arm/mach-zynq/include/mach/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/timex.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_TIMEX_H__ -#define __MACH_TIMEX_H__ - -/* the following is needed for the system to build but will be removed - in the future, the value is not important but won't hurt -*/ -#define CLOCK_TICK_RATE (100 * HZ) - -#endif diff --git a/arch/arm/mach-zynq/include/mach/uart.h b/arch/arm/mach-zynq/include/mach/uart.h deleted file mode 100644 index 5c47c97156f3..000000000000 --- a/arch/arm/mach-zynq/include/mach/uart.h +++ /dev/null @@ -1,25 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/uart.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_UART_H__ -#define __MACH_UART_H__ - -#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */ -#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */ -#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */ - -#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */ -#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ - -#endif diff --git a/arch/arm/mach-zynq/include/mach/uncompress.h b/arch/arm/mach-zynq/include/mach/uncompress.h deleted file mode 100644 index af4e8447bfa3..000000000000 --- a/arch/arm/mach-zynq/include/mach/uncompress.h +++ /dev/null @@ -1,51 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/uncompress.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_UNCOMPRESS_H__ -#define __MACH_UNCOMPRESS_H__ - -#include <linux/io.h> -#include <asm/processor.h> -#include <mach/zynq_soc.h> -#include <mach/uart.h> - -void arch_decomp_setup(void) -{ -} - -static inline void flush(void) -{ - /* - * Wait while the FIFO is not empty - */ - while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) & - UART_SR_TXEMPTY)) - cpu_relax(); -} - -#define arch_decomp_wdog() - -static void putc(char ch) -{ - /* - * Wait for room in the FIFO, then write the char into the FIFO - */ - while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) & - UART_SR_TXFULL) - cpu_relax(); - - __raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET)); -} - -#endif diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h deleted file mode 100644 index 5ebbd8e6eeee..000000000000 --- a/arch/arm/mach-zynq/include/mach/zynq_soc.h +++ /dev/null @@ -1,53 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/zynq_soc.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_XILINX_SOC_H__ -#define __MACH_XILINX_SOC_H__ - -#include <asm/pgtable.h> - -#define PERIPHERAL_CLOCK_RATE 2500000 - -/* Static peripheral mappings are mapped at the top of the vmalloc region. The - * early uart mapping causes intermediate problems/failure at certain - * addresses, including the very top of the vmalloc region. Map it at an - * address that is known to work. - */ -#define UART0_PHYS 0xE0000000 -#define UART1_PHYS 0xE0001000 -#define UART_SIZE SZ_4K -#define UART_VIRT 0xF0001000 - -#define TTC0_PHYS 0xF8001000 -#define TTC0_SIZE SZ_4K -#define TTC0_VIRT (VMALLOC_END - TTC0_SIZE) - -#define SCU_PERIPH_PHYS 0xF8F00000 -#define SCU_PERIPH_SIZE SZ_8K -#define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE) - -#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) -# define LL_UART_PADDR UART1_PHYS -#else -# define LL_UART_PADDR UART0_PHYS -#endif - -#define LL_UART_VADDR UART_VIRT - -/* The following are intended for the devices that are mapped early */ - -#define TTC0_BASE IOMEM(TTC0_VIRT) -#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT) - -#endif diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c index 9662306aa12f..de3df283da74 100644 --- a/arch/arm/mach-zynq/timer.c +++ b/arch/arm/mach-zynq/timer.c @@ -29,7 +29,6 @@ #include <linux/slab.h> #include <linux/clk-provider.h> -#include <mach/zynq_soc.h> #include "common.h" /* diff --git a/arch/arm/mm/cache-aurora-l2.h b/arch/arm/mm/cache-aurora-l2.h new file mode 100644 index 000000000000..c86124769831 --- /dev/null +++ b/arch/arm/mm/cache-aurora-l2.h @@ -0,0 +1,55 @@ +/* + * AURORA shared L2 cache controller support + * + * Copyright (C) 2012 Marvell + * + * Yehuda Yitschak <yehuday@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARM_HARDWARE_AURORA_L2_H +#define __ASM_ARM_HARDWARE_AURORA_L2_H + +#define AURORA_SYNC_REG 0x700 +#define AURORA_RANGE_BASE_ADDR_REG 0x720 +#define AURORA_FLUSH_PHY_ADDR_REG 0x7f0 +#define AURORA_INVAL_RANGE_REG 0x774 +#define AURORA_CLEAN_RANGE_REG 0x7b4 +#define AURORA_FLUSH_RANGE_REG 0x7f4 + +#define AURORA_ACR_REPLACEMENT_OFFSET 27 +#define AURORA_ACR_REPLACEMENT_MASK \ + (0x3 << AURORA_ACR_REPLACEMENT_OFFSET) +#define AURORA_ACR_REPLACEMENT_TYPE_WAYRR \ + (0 << AURORA_ACR_REPLACEMENT_OFFSET) +#define AURORA_ACR_REPLACEMENT_TYPE_LFSR \ + (1 << AURORA_ACR_REPLACEMENT_OFFSET) +#define AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU \ + (3 << AURORA_ACR_REPLACEMENT_OFFSET) + +#define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET 0 +#define AURORA_ACR_FORCE_WRITE_POLICY_MASK \ + (0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) +#define AURORA_ACR_FORCE_WRITE_POLICY_DIS \ + (0 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) +#define AURORA_ACR_FORCE_WRITE_BACK_POLICY \ + (1 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) +#define AURORA_ACR_FORCE_WRITE_THRO_POLICY \ + (2 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) + +#define MAX_RANGE_SIZE 1024 + +#define AURORA_WAY_SIZE_SHIFT 2 + +#define AURORA_CTRL_FW 0x100 + +/* chose a number outside L2X0_CACHE_ID_PART_MASK to be sure to make + * the distinction between a number coming from hardware and a number + * coming from the device tree */ +#define AURORA_CACHE_ID 0x100 + +#endif /* __ASM_ARM_HARDWARE_AURORA_L2_H */ diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 8a97e6443c62..6911b8b2745c 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -25,6 +25,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#include "cache-aurora-l2.h" #define CACHE_LINE_SIZE 32 @@ -34,14 +35,20 @@ static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; +/* Aurora don't have the cache ID register available, so we have to + * pass it though the device tree */ +static u32 cache_id_part_number_from_dt; + struct l2x0_regs l2x0_saved_regs; struct l2x0_of_data { void (*setup)(const struct device_node *, u32 *, u32 *); void (*save)(void); - void (*resume)(void); + struct outer_cache_fns outer_cache; }; +static bool of_init = false; + static inline void cache_wait_way(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ @@ -168,7 +175,7 @@ static void l2x0_inv_all(void) /* invalidate all ways */ raw_spin_lock_irqsave(&l2x0_lock, flags); /* Invalidating when L2 is enabled is a nono */ - BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1); + BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); cache_sync(); @@ -292,11 +299,18 @@ static void l2x0_unlock(u32 cache_id) int lockregs; int i; - if (cache_id == L2X0_CACHE_ID_PART_L310) + switch (cache_id) { + case L2X0_CACHE_ID_PART_L310: lockregs = 8; - else + break; + case AURORA_CACHE_ID: + lockregs = 4; + break; + default: /* L210 and unknown types */ lockregs = 1; + break; + } for (i = 0; i < lockregs; i++) { writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + @@ -312,18 +326,22 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) u32 cache_id; u32 way_size = 0; int ways; + int way_size_shift = L2X0_WAY_SIZE_SHIFT; const char *type; l2x0_base = base; - - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); + if (cache_id_part_number_from_dt) + cache_id = cache_id_part_number_from_dt; + else + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID) + & L2X0_CACHE_ID_PART_MASK; aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; /* Determine the number of ways */ - switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + switch (cache_id) { case L2X0_CACHE_ID_PART_L310: if (aux & (1 << 16)) ways = 16; @@ -340,6 +358,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) ways = (aux >> 13) & 0xf; type = "L210"; break; + + case AURORA_CACHE_ID: + sync_reg_offset = AURORA_SYNC_REG; + ways = (aux >> 13) & 0xf; + ways = 2 << ((ways + 1) >> 2); + way_size_shift = AURORA_WAY_SIZE_SHIFT; + type = "Aurora"; + break; default: /* Assume unknown chips have 8 ways */ ways = 8; @@ -353,7 +379,8 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) * L2 cache Size = Way size * Number of ways */ way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17; - way_size = 1 << (way_size + 3); + way_size = 1 << (way_size + way_size_shift); + l2x0_size = ways * way_size * SZ_1K; /* @@ -361,7 +388,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) * If you are booting from non-secure mode * accessing the below registers will fault. */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { /* Make sure that I&D is not locked down when starting */ l2x0_unlock(cache_id); @@ -371,7 +398,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) l2x0_inv_all(); /* enable L2X0 */ - writel_relaxed(1, l2x0_base + L2X0_CTRL); + writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); } /* Re-read it in case some bits are reserved. */ @@ -380,13 +407,15 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) /* Save the value for resuming. */ l2x0_saved_regs.aux_ctrl = aux; - outer_cache.inv_range = l2x0_inv_range; - outer_cache.clean_range = l2x0_clean_range; - outer_cache.flush_range = l2x0_flush_range; - outer_cache.sync = l2x0_cache_sync; - outer_cache.flush_all = l2x0_flush_all; - outer_cache.inv_all = l2x0_inv_all; - outer_cache.disable = l2x0_disable; + if (!of_init) { + outer_cache.inv_range = l2x0_inv_range; + outer_cache.clean_range = l2x0_clean_range; + outer_cache.flush_range = l2x0_flush_range; + outer_cache.sync = l2x0_cache_sync; + outer_cache.flush_all = l2x0_flush_all; + outer_cache.inv_all = l2x0_inv_all; + outer_cache.disable = l2x0_disable; + } printk(KERN_INFO "%s cache controller enabled\n", type); printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", @@ -394,6 +423,100 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) } #ifdef CONFIG_OF +static int l2_wt_override; + +/* + * Note that the end addresses passed to Linux primitives are + * noninclusive, while the hardware cache range operations use + * inclusive start and end addresses. + */ +static unsigned long calc_range_end(unsigned long start, unsigned long end) +{ + /* + * Limit the number of cache lines processed at once, + * since cache range operations stall the CPU pipeline + * until completion. + */ + if (end > start + MAX_RANGE_SIZE) + end = start + MAX_RANGE_SIZE; + + /* + * Cache range operations can't straddle a page boundary. + */ + if (end > PAGE_ALIGN(start+1)) + end = PAGE_ALIGN(start+1); + + return end; +} + +/* + * Make sure 'start' and 'end' reference the same page, as L2 is PIPT + * and range operations only do a TLB lookup on the start address. + */ +static void aurora_pa_range(unsigned long start, unsigned long end, + unsigned long offset) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + writel(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG); + writel(end, l2x0_base + offset); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + cache_sync(); +} + +static void aurora_inv_range(unsigned long start, unsigned long end) +{ + /* + * round start and end adresses up to cache line size + */ + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + + /* + * Invalidate all full cache lines between 'start' and 'end'. + */ + while (start < end) { + unsigned long range_end = calc_range_end(start, end); + aurora_pa_range(start, range_end - CACHE_LINE_SIZE, + AURORA_INVAL_RANGE_REG); + start = range_end; + } +} + +static void aurora_clean_range(unsigned long start, unsigned long end) +{ + /* + * If L2 is forced to WT, the L2 will always be clean and we + * don't need to do anything here. + */ + if (!l2_wt_override) { + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + while (start != end) { + unsigned long range_end = calc_range_end(start, end); + aurora_pa_range(start, range_end - CACHE_LINE_SIZE, + AURORA_CLEAN_RANGE_REG); + start = range_end; + } + } +} + +static void aurora_flush_range(unsigned long start, unsigned long end) +{ + if (!l2_wt_override) { + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + while (start != end) { + unsigned long range_end = calc_range_end(start, end); + aurora_pa_range(start, range_end - CACHE_LINE_SIZE, + AURORA_FLUSH_RANGE_REG); + start = range_end; + } + } +} + static void __init l2x0_of_setup(const struct device_node *np, u32 *aux_val, u32 *aux_mask) { @@ -491,9 +614,15 @@ static void __init pl310_save(void) } } +static void aurora_save(void) +{ + l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL); + l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); +} + static void l2x0_resume(void) { - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { /* restore aux ctrl and enable l2 */ l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); @@ -502,7 +631,7 @@ static void l2x0_resume(void) l2x0_inv_all(); - writel_relaxed(1, l2x0_base + L2X0_CTRL); + writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); } } @@ -510,7 +639,7 @@ static void pl310_resume(void) { u32 l2x0_revision; - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { /* restore pl310 setup */ writel_relaxed(l2x0_saved_regs.tag_latency, l2x0_base + L2X0_TAG_LATENCY_CTRL); @@ -536,22 +665,108 @@ static void pl310_resume(void) l2x0_resume(); } +static void aurora_resume(void) +{ + if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + writel(l2x0_saved_regs.aux_ctrl, l2x0_base + L2X0_AUX_CTRL); + writel(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL); + } +} + +static void __init aurora_broadcast_l2_commands(void) +{ + __u32 u; + /* Enable Broadcasting of cache commands to L2*/ + __asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u)); + u |= AURORA_CTRL_FW; /* Set the FW bit */ + __asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u)); + isb(); +} + +static void __init aurora_of_setup(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; + u32 mask = AURORA_ACR_REPLACEMENT_MASK; + + of_property_read_u32(np, "cache-id-part", + &cache_id_part_number_from_dt); + + /* Determine and save the write policy */ + l2_wt_override = of_property_read_bool(np, "wt-override"); + + if (l2_wt_override) { + val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; + mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + static const struct l2x0_of_data pl310_data = { - pl310_of_setup, - pl310_save, - pl310_resume, + .setup = pl310_of_setup, + .save = pl310_save, + .outer_cache = { + .resume = pl310_resume, + .inv_range = l2x0_inv_range, + .clean_range = l2x0_clean_range, + .flush_range = l2x0_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + .set_debug = pl310_set_debug, + }, }; static const struct l2x0_of_data l2x0_data = { - l2x0_of_setup, - NULL, - l2x0_resume, + .setup = l2x0_of_setup, + .save = NULL, + .outer_cache = { + .resume = l2x0_resume, + .inv_range = l2x0_inv_range, + .clean_range = l2x0_clean_range, + .flush_range = l2x0_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + }, +}; + +static const struct l2x0_of_data aurora_with_outer_data = { + .setup = aurora_of_setup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, + .flush_range = aurora_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + }, +}; + +static const struct l2x0_of_data aurora_no_outer_data = { + .setup = aurora_of_setup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + }, }; static const struct of_device_id l2x0_ids[] __initconst = { { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, + { .compatible = "marvell,aurora-system-cache", + .data = (void *)&aurora_no_outer_data}, + { .compatible = "marvell,aurora-outer-cache", + .data = (void *)&aurora_with_outer_data}, {} }; @@ -577,17 +792,24 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; /* L2 configuration can only be changed if the cache is disabled */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { if (data->setup) data->setup(np, &aux_val, &aux_mask); + + /* For aurora cache in no outer mode select the + * correct mode using the coprocessor*/ + if (data == &aurora_no_outer_data) + aurora_broadcast_l2_commands(); } if (data->save) data->save(); + of_init = true; l2x0_init(l2x0_base, aux_val, aux_mask); - outer_cache.resume = data->resume; + memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); + return 0; } #endif diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 4e07eec1270d..bc4a5e9ebb78 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -2,6 +2,9 @@ * linux/arch/arm/mm/context.c * * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved. + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,14 +17,40 @@ #include <linux/percpu.h> #include <asm/mmu_context.h> +#include <asm/smp_plat.h> #include <asm/thread_notify.h> #include <asm/tlbflush.h> +/* + * On ARMv6, we have the following structure in the Context ID: + * + * 31 7 0 + * +-------------------------+-----------+ + * | process ID | ASID | + * +-------------------------+-----------+ + * | context ID | + * +-------------------------------------+ + * + * The ASID is used to tag entries in the CPU caches and TLBs. + * The context ID is used by debuggers and trace logic, and + * should be unique within all running processes. + */ +#define ASID_FIRST_VERSION (1ULL << ASID_BITS) +#define NUM_USER_ASIDS (ASID_FIRST_VERSION - 1) + +#define ASID_TO_IDX(asid) ((asid & ~ASID_MASK) - 1) +#define IDX_TO_ASID(idx) ((idx + 1) & ~ASID_MASK) + static DEFINE_RAW_SPINLOCK(cpu_asid_lock); -unsigned int cpu_last_asid = ASID_FIRST_VERSION; +static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION); +static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS); + +static DEFINE_PER_CPU(atomic64_t, active_asids); +static DEFINE_PER_CPU(u64, reserved_asids); +static cpumask_t tlb_flush_pending; #ifdef CONFIG_ARM_LPAE -void cpu_set_reserved_ttbr0(void) +static void cpu_set_reserved_ttbr0(void) { unsigned long ttbl = __pa(swapper_pg_dir); unsigned long ttbh = 0; @@ -37,7 +66,7 @@ void cpu_set_reserved_ttbr0(void) isb(); } #else -void cpu_set_reserved_ttbr0(void) +static void cpu_set_reserved_ttbr0(void) { u32 ttb; /* Copy TTBR1 into TTBR0 */ @@ -84,124 +113,104 @@ static int __init contextidr_notifier_init(void) arch_initcall(contextidr_notifier_init); #endif -/* - * We fork()ed a process, and we need a new context for the child - * to run in. - */ -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) +static void flush_context(unsigned int cpu) { - mm->context.id = 0; - raw_spin_lock_init(&mm->context.id_lock); -} + int i; + u64 asid; + + /* Update the list of reserved ASIDs and the ASID bitmap. */ + bitmap_clear(asid_map, 0, NUM_USER_ASIDS); + for_each_possible_cpu(i) { + if (i == cpu) { + asid = 0; + } else { + asid = atomic64_xchg(&per_cpu(active_asids, i), 0); + __set_bit(ASID_TO_IDX(asid), asid_map); + } + per_cpu(reserved_asids, i) = asid; + } -static void flush_context(void) -{ - cpu_set_reserved_ttbr0(); - local_flush_tlb_all(); - if (icache_is_vivt_asid_tagged()) { + /* Queue a TLB invalidate and flush the I-cache if necessary. */ + if (!tlb_ops_need_broadcast()) + cpumask_set_cpu(cpu, &tlb_flush_pending); + else + cpumask_setall(&tlb_flush_pending); + + if (icache_is_vivt_asid_tagged()) __flush_icache_all(); - dsb(); - } } -#ifdef CONFIG_SMP +static int is_reserved_asid(u64 asid) +{ + int cpu; + for_each_possible_cpu(cpu) + if (per_cpu(reserved_asids, cpu) == asid) + return 1; + return 0; +} -static void set_mm_context(struct mm_struct *mm, unsigned int asid) +static void new_context(struct mm_struct *mm, unsigned int cpu) { - unsigned long flags; + u64 asid = mm->context.id; + u64 generation = atomic64_read(&asid_generation); - /* - * Locking needed for multi-threaded applications where the - * same mm->context.id could be set from different CPUs during - * the broadcast. This function is also called via IPI so the - * mm->context.id_lock has to be IRQ-safe. - */ - raw_spin_lock_irqsave(&mm->context.id_lock, flags); - if (likely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) { + if (asid != 0 && is_reserved_asid(asid)) { /* - * Old version of ASID found. Set the new one and - * reset mm_cpumask(mm). + * Our current ASID was active during a rollover, we can + * continue to use it and this was just a false alarm. */ - mm->context.id = asid; + asid = generation | (asid & ~ASID_MASK); + } else { + /* + * Allocate a free ASID. If we can't find one, take a + * note of the currently active ASIDs and mark the TLBs + * as requiring flushes. + */ + asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS); + if (asid == NUM_USER_ASIDS) { + generation = atomic64_add_return(ASID_FIRST_VERSION, + &asid_generation); + flush_context(cpu); + asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS); + } + __set_bit(asid, asid_map); + asid = generation | IDX_TO_ASID(asid); cpumask_clear(mm_cpumask(mm)); } - raw_spin_unlock_irqrestore(&mm->context.id_lock, flags); - /* - * Set the mm_cpumask(mm) bit for the current CPU. - */ - cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm)); + mm->context.id = asid; } -/* - * Reset the ASID on the current CPU. This function call is broadcast - * from the CPU handling the ASID rollover and holding cpu_asid_lock. - */ -static void reset_context(void *info) +void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) { - unsigned int asid; + unsigned long flags; unsigned int cpu = smp_processor_id(); - struct mm_struct *mm = current->active_mm; - smp_rmb(); - asid = cpu_last_asid + cpu + 1; + if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq)) + __check_vmalloc_seq(mm); - flush_context(); - set_mm_context(mm, asid); - - /* set the new ASID */ - cpu_switch_mm(mm->pgd, mm); -} + /* + * Required during context switch to avoid speculative page table + * walking with the wrong TTBR. + */ + cpu_set_reserved_ttbr0(); -#else + if (!((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS) + && atomic64_xchg(&per_cpu(active_asids, cpu), mm->context.id)) + goto switch_mm_fastpath; -static inline void set_mm_context(struct mm_struct *mm, unsigned int asid) -{ - mm->context.id = asid; - cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id())); -} + raw_spin_lock_irqsave(&cpu_asid_lock, flags); + /* Check that our ASID belongs to the current generation. */ + if ((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS) + new_context(mm, cpu); -#endif + atomic64_set(&per_cpu(active_asids, cpu), mm->context.id); + cpumask_set_cpu(cpu, mm_cpumask(mm)); -void __new_context(struct mm_struct *mm) -{ - unsigned int asid; + if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) + local_flush_tlb_all(); + raw_spin_unlock_irqrestore(&cpu_asid_lock, flags); - raw_spin_lock(&cpu_asid_lock); -#ifdef CONFIG_SMP - /* - * Check the ASID again, in case the change was broadcast from - * another CPU before we acquired the lock. - */ - if (unlikely(((mm->context.id ^ cpu_last_asid) >> ASID_BITS) == 0)) { - cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm)); - raw_spin_unlock(&cpu_asid_lock); - return; - } -#endif - /* - * At this point, it is guaranteed that the current mm (with - * an old ASID) isn't active on any other CPU since the ASIDs - * are changed simultaneously via IPI. - */ - asid = ++cpu_last_asid; - if (asid == 0) - asid = cpu_last_asid = ASID_FIRST_VERSION; - - /* - * If we've used up all our ASIDs, we need - * to start a new version and flush the TLB. - */ - if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id() + 1; - flush_context(); -#ifdef CONFIG_SMP - smp_wmb(); - smp_call_function(reset_context, NULL, 1); -#endif - cpu_last_asid += NR_CPUS; - } - - set_mm_context(mm, asid); - raw_spin_unlock(&cpu_asid_lock); +switch_mm_fastpath: + cpu_switch_mm(mm->pgd, mm); } diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index ab88ed4f8e08..99db769307ec 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -92,6 +92,9 @@ static int __init init_static_idmap(void) (long long)idmap_start, (long long)idmap_end); identity_mapping_add(idmap_pgd, idmap_start, idmap_end); + /* Flush L1 for the hardware to see this page table content */ + flush_cache_louis(); + return 0; } early_initcall(init_static_idmap); @@ -103,12 +106,15 @@ early_initcall(init_static_idmap); */ void setup_mm_for_reboot(void) { - /* Clean and invalidate L1. */ - flush_cache_all(); - /* Switch to the identity mapping. */ cpu_switch_mm(idmap_pgd, &init_mm); - /* Flush the TLB. */ +#ifdef CONFIG_CPU_HAS_ASID + /* + * We don't have a clean ASID for the identity mapping, which + * may clash with virtual addresses of the previous page tables + * and therefore potentially in the TLB. + */ local_flush_tlb_all(); +#endif } diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 5dcc2fd46c46..88fd86cf3d9a 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -47,18 +47,18 @@ int ioremap_page(unsigned long virt, unsigned long phys, } EXPORT_SYMBOL(ioremap_page); -void __check_kvm_seq(struct mm_struct *mm) +void __check_vmalloc_seq(struct mm_struct *mm) { unsigned int seq; do { - seq = init_mm.context.kvm_seq; + seq = init_mm.context.vmalloc_seq; memcpy(pgd_offset(mm, VMALLOC_START), pgd_offset_k(VMALLOC_START), sizeof(pgd_t) * (pgd_index(VMALLOC_END) - pgd_index(VMALLOC_START))); - mm->context.kvm_seq = seq; - } while (seq != init_mm.context.kvm_seq); + mm->context.vmalloc_seq = seq; + } while (seq != init_mm.context.vmalloc_seq); } #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) @@ -89,13 +89,13 @@ static void unmap_area_sections(unsigned long virt, unsigned long size) if (!pmd_none(pmd)) { /* * Clear the PMD from the page table, and - * increment the kvm sequence so others + * increment the vmalloc sequence so others * notice this change. * * Note: this is still racy on SMP machines. */ pmd_clear(pmdp); - init_mm.context.kvm_seq++; + init_mm.context.vmalloc_seq++; /* * Free the page table, if there was one. @@ -112,8 +112,8 @@ static void unmap_area_sections(unsigned long virt, unsigned long size) * Ensure that the active_mm is up to date - we want to * catch any use-after-iounmap cases. */ - if (current->active_mm->context.kvm_seq != init_mm.context.kvm_seq) - __check_kvm_seq(current->active_mm); + if (current->active_mm->context.vmalloc_seq != init_mm.context.vmalloc_seq) + __check_vmalloc_seq(current->active_mm); flush_tlb_kernel_range(virt, end); } diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index ce8cb1970d7a..10062ceadd1c 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -11,18 +11,6 @@ #include <linux/random.h> #include <asm/cachetype.h> -static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, - unsigned long pgoff) -{ - unsigned long base = addr & ~(SHMLBA-1); - unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1); - - if (base + off <= addr) - return base + off; - - return base - off; -} - #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1))) @@ -69,9 +57,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; - unsigned long start_addr; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; /* * We only need to do colour alignment if either the I or D @@ -104,46 +92,14 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, (!vma || addr + len <= vma->vm_start)) return addr; } - if (len > mm->cached_hole_size) { - start_addr = addr = mm->free_area_cache; - } else { - start_addr = addr = mm->mmap_base; - mm->cached_hole_size = 0; - } -full_search: - if (do_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (TASK_SIZE - len < addr) { - /* - * Start a new search - just in case we missed - * some holes. - */ - if (start_addr != TASK_UNMAPPED_BASE) { - start_addr = addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (!vma || addr + len <= vma->vm_start) { - /* - * Remember the place where we stopped the search: - */ - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - addr = vma->vm_end; - if (do_align) - addr = COLOUR_ALIGN(addr, pgoff); - } + info.flags = 0; + info.length = len; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); } unsigned long @@ -156,6 +112,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, unsigned long addr = addr0; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; /* * We only need to do colour alignment if either the I or D @@ -187,70 +144,27 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } - /* check if free_area_cache is useful for us */ - if (len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = mm->mmap_base; - } - - /* either no address requested or can't fit in requested address hole */ - addr = mm->free_area_cache; - if (do_align) { - unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff); - addr = base + len; - } - - /* make sure it can fit in the remaining address space */ - if (addr > len) { - vma = find_vma(mm, addr-len); - if (!vma || addr <= vma->vm_start) - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr-len); - } - - if (mm->mmap_base < len) - goto bottomup; - - addr = mm->mmap_base - len; - if (do_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - - do { - /* - * Lookup failure means no vma is above this address, - * else if new region fits below vma->vm_start, - * return with success: - */ - vma = find_vma(mm, addr); - if (!vma || addr+len <= vma->vm_start) - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + addr = vm_unmapped_area(&info); - /* remember the largest hole we saw so far */ - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = vma->vm_start - len; - if (do_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - } while (len < vma->vm_start); - -bottomup: /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->cached_hole_size = ~0UL; - mm->free_area_cache = TASK_UNMAPPED_BASE; - addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - /* - * Restore the topdown base: - */ - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = ~0UL; + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + addr = vm_unmapped_area(&info); + } return addr; } @@ -279,7 +193,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) * You really shouldn't be using read() or write() on /dev/mem. This * might go away in the future. */ -int valid_phys_addr_range(unsigned long addr, size_t size) +int valid_phys_addr_range(phys_addr_t addr, size_t size) { if (addr < PHYS_OFFSET) return 0; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 941dfb9e9a78..9f0610243bd6 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -488,7 +488,7 @@ static void __init build_mem_type_table(void) #endif for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); + pteval_t v = pgprot_val(protection_map[i]); protection_map[i] = __pgprot(v | user_pgprot); } @@ -876,6 +876,22 @@ static void __init pci_reserve_io(void) #define pci_reserve_io() do { } while (0) #endif +#ifdef CONFIG_DEBUG_LL +void __init debug_ll_io_init(void) +{ + struct map_desc map; + + debug_ll_addr(&map.pfn, &map.virtual); + if (!map.pfn || !map.virtual) + return; + map.pfn = __phys_to_pfn(map.pfn); + map.virtual &= PAGE_MASK; + map.length = PAGE_SIZE; + map.type = MT_DEVICE; + create_mapping(&map); +} +#endif + static void * __initdata vmalloc_min = (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET); diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index b29a2265af01..eb6aa73bc8b7 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -167,6 +167,10 @@ tst r1, #L_PTE_YOUNG tstne r1, #L_PTE_PRESENT moveq r3, #0 +#ifndef CONFIG_CPU_USE_DOMAINS + tstne r1, #L_PTE_NONE + movne r3, #0 +#endif str r3, [r0] mcr p15, 0, r0, c7, c10, 1 @ flush_pte diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 86b8b480634f..09c5233f4dfc 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area) mov pc, lr /* - * cpu_arm926_switch_mm(pgd_phys, tsk) + * cpu_v6_switch_mm(pgd_phys, tsk) * * Set the translation table base pointer to be pgd_phys * diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index fd045e706390..6d98c13ab827 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -100,7 +100,11 @@ ENTRY(cpu_v7_set_pte_ext) orrne r3, r3, #PTE_EXT_XN tst r1, #L_PTE_YOUNG - tstne r1, #L_PTE_PRESENT + tstne r1, #L_PTE_VALID +#ifndef CONFIG_CPU_USE_DOMAINS + eorne r1, r1, #L_PTE_NONE + tstne r1, #L_PTE_NONE +#endif moveq r3, #0 ARM( str r3, [r0, #2048]! ) @@ -161,11 +165,11 @@ ENDPROC(cpu_v7_set_pte_ext) * TFR EV X F I D LR S * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced - * 1 0 110 0011 1100 .111 1101 < we want + * 01 0 110 0011 1100 .111 1101 < we want */ .align 2 .type v7_crval, #object v7_crval: - crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c + crval clear=0x2120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c .previous diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 8de0f1dd1549..7b56386f9496 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -65,8 +65,11 @@ ENDPROC(cpu_v7_switch_mm) */ ENTRY(cpu_v7_set_pte_ext) #ifdef CONFIG_MMU - tst r2, #L_PTE_PRESENT + tst r2, #L_PTE_VALID beq 1f + tst r3, #1 << (57 - 32) @ L_PTE_NONE + bicne r2, #L_PTE_VALID + bne 1f tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 846d279f3176..42cc833aa02f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -57,7 +57,7 @@ ENTRY(cpu_v7_reset) THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) mcr p15, 0, r1, c1, c0, 0 @ disable MMU isb - mov pc, r0 + bx r0 ENDPROC(cpu_v7_reset) .popsection diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index c641fb685017..a34f1e214116 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -16,6 +16,7 @@ #include <linux/netdevice.h> #include <linux/string.h> #include <linux/slab.h> +#include <linux/if_vlan.h> #include <asm/cacheflush.h> #include <asm/hwcap.h> @@ -42,7 +43,7 @@ #define r_skb_hl ARM_R8 #define SCRATCH_SP_OFFSET 0 -#define SCRATCH_OFF(k) (SCRATCH_SP_OFFSET + (k)) +#define SCRATCH_OFF(k) (SCRATCH_SP_OFFSET + 4 * (k)) #define SEEN_MEM ((1 << BPF_MEMWORDS) - 1) #define SEEN_MEM_WORD(k) (1 << (k)) @@ -168,6 +169,8 @@ static inline bool is_load_to_a(u16 inst) case BPF_S_ANC_MARK: case BPF_S_ANC_PROTOCOL: case BPF_S_ANC_RXHASH: + case BPF_S_ANC_VLAN_TAG: + case BPF_S_ANC_VLAN_TAG_PRESENT: case BPF_S_ANC_QUEUE: return true; default: @@ -646,6 +649,16 @@ load_ind: update_on_xread(ctx); emit(ARM_ORR_R(r_A, r_A, r_X), ctx); break; + case BPF_S_ALU_XOR_K: + /* A ^= K; */ + OP_IMM3(ARM_EOR, r_A, r_A, k, ctx); + break; + case BPF_S_ANC_ALU_XOR_X: + case BPF_S_ALU_XOR_X: + /* A ^= X */ + update_on_xread(ctx); + emit(ARM_EOR_R(r_A, r_A, r_X), ctx); + break; case BPF_S_ALU_AND_K: /* A &= K */ OP_IMM3(ARM_AND, r_A, r_A, k, ctx); @@ -762,11 +775,6 @@ b_epilogue: update_on_xread(ctx); emit(ARM_MOV_R(r_A, r_X), ctx); break; - case BPF_S_ANC_ALU_XOR_X: - /* A ^= X */ - update_on_xread(ctx); - emit(ARM_EOR_R(r_A, r_A, r_X), ctx); - break; case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol) */ ctx->seen |= SEEN_SKB; @@ -810,6 +818,17 @@ b_epilogue: off = offsetof(struct sk_buff, rxhash); emit(ARM_LDR_I(r_A, r_skb, off), ctx); break; + case BPF_S_ANC_VLAN_TAG: + case BPF_S_ANC_VLAN_TAG_PRESENT: + ctx->seen |= SEEN_SKB; + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, vlan_tci) != 2); + off = offsetof(struct sk_buff, vlan_tci); + emit(ARM_LDRH_I(r_A, r_skb, off), ctx); + if (inst->code == BPF_S_ANC_VLAN_TAG) + OP_IMM3(ARM_AND, r_A, r_A, VLAN_VID_MASK, ctx); + else + OP_IMM3(ARM_AND, r_A, r_A, VLAN_TAG_PRESENT, ctx); + break; case BPF_S_ANC_QUEUE: ctx->seen |= SEEN_SKB; BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, @@ -845,7 +864,7 @@ void bpf_jit_compile(struct sk_filter *fp) ctx.skf = fp; ctx.ret0_fp_idx = -1; - ctx.offsets = kzalloc(GFP_KERNEL, 4 * (ctx.skf->len + 1)); + ctx.offsets = kzalloc(4 * (ctx.skf->len + 1), GFP_KERNEL); if (ctx.offsets == NULL) return; @@ -864,7 +883,7 @@ void bpf_jit_compile(struct sk_filter *fp) ctx.idx += ctx.imm_count; if (ctx.imm_count) { - ctx.imms = kzalloc(GFP_KERNEL, 4 * ctx.imm_count); + ctx.imms = kzalloc(4 * ctx.imm_count, GFP_KERNEL); if (ctx.imms == NULL) goto out; } diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index 7fa2f7d3cb90..afb84621ff6f 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h @@ -69,6 +69,7 @@ #define ARM_INST_CMP_I 0x03500000 #define ARM_INST_EOR_R 0x00200000 +#define ARM_INST_EOR_I 0x02200000 #define ARM_INST_LDRB_I 0x05d00000 #define ARM_INST_LDRB_R 0x07d00000 @@ -135,6 +136,7 @@ #define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm) #define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm) +#define ARM_EOR_I(rd, rn, imm) _AL3_I(ARM_INST_EOR, rd, rn, imm) #define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \ | (off)) diff --git a/arch/arm/plat-mxc/devices/platform-mx2-emma.c b/arch/arm/plat-mxc/devices/platform-mx2-emma.c new file mode 100644 index 000000000000..508404ddd4ea --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mx2-emma.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mx2_emmaprp_data_entry_single(soc) \ + { \ + .iobase = soc ## _EMMAPRP_BASE_ADDR, \ + .iosize = SZ_32, \ + .irq = soc ## _INT_EMMAPRP, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst = + imx_mx2_emmaprp_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_emma_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("m2m-emmaprp", 0, + res, 2, NULL, 0, DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig deleted file mode 100644 index 19f55cae5d73..000000000000 --- a/arch/arm/plat-nomadik/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -# We keep common IP's here for Nomadik and other similar -# familiy of processors from ST-Ericsson. At the moment we have -# just MTU, others to follow soon. - -config PLAT_NOMADIK - bool - depends on ARCH_NOMADIK || ARCH_U8500 - default y - select CLKSRC_MMIO - help - Common platform code for Nomadik and other ST-Ericsson - platforms. - -if PLAT_NOMADIK - -config HAS_MTU - bool - help - Support for Multi Timer Unit. MTU provides access - to multiple interrupt generating programmable - 32-bit free running decrementing counters. - -config NOMADIK_MTU_SCHED_CLOCK - bool - depends on HAS_MTU - help - Use the Multi Timer Unit as the sched_clock. - -endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile deleted file mode 100644 index 37c7cdd0f8f0..000000000000 --- a/arch/arm/plat-nomadik/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# arch/arm/plat-nomadik/Makefile -# Copyright 2009 ST-Ericsson -# Licensed under GPLv2 - -obj-$(CONFIG_HAS_MTU) += timer.o diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h deleted file mode 100644 index c08a54d9d889..000000000000 --- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); -extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); -#ifdef CONFIG_PINCTRL_NOMADIK -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -#else -static inline int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - return -ENODEV; -} -#endif -extern int nmk_gpio_get_mode(int gpio); - -extern void nmk_gpio_wakeups_suspend(void); -extern void nmk_gpio_wakeups_resume(void); - -extern void nmk_gpio_clocks_enable(void); -extern void nmk_gpio_clocks_disable(void); - -extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h deleted file mode 100644 index 582641f3dc01..000000000000 --- a/arch/arm/plat-nomadik/include/plat/mtu.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __PLAT_MTU_H -#define __PLAT_MTU_H - -void nmdk_timer_init(void __iomem *base); -void nmdk_clkevt_reset(void); -void nmdk_clksrc_reset(void); - -#endif /* __PLAT_MTU_H */ - diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h deleted file mode 100644 index 3b8ec60af351..000000000000 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * - * Based on arch/arm/mach-pxa/include/mach/mfp.h: - * Copyright (C) 2007 Marvell International Ltd. - * eric miao <eric.miao@marvell.com> - */ - -#ifndef __PLAT_PINCFG_H -#define __PLAT_PINCFG_H - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); -extern int nmk_config_pins(pin_cfg_t *cfgs, int num); -extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); - -#endif diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h deleted file mode 100644 index 9ff93b065686..000000000000 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - - -#ifndef STE_DMA40_H -#define STE_DMA40_H - -#include <linux/dmaengine.h> -#include <linux/scatterlist.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - -/* - * Maxium size for a single dma descriptor - * Size is limited to 16 bits. - * Size is in the units of addr-widths (1,2,4,8 bytes) - * Larger transfers will be split up to multiple linked desc - */ -#define STEDMA40_MAX_SEG_SIZE 0xFFFF - -/* dev types for memcpy */ -#define STEDMA40_DEV_DST_MEMORY (-1) -#define STEDMA40_DEV_SRC_MEMORY (-1) - -enum stedma40_mode { - STEDMA40_MODE_LOGICAL = 0, - STEDMA40_MODE_PHYSICAL, - STEDMA40_MODE_OPERATION, -}; - -enum stedma40_mode_opt { - STEDMA40_PCHAN_BASIC_MODE = 0, - STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, - STEDMA40_PCHAN_MODULO_MODE, - STEDMA40_PCHAN_DOUBLE_DST_MODE, - STEDMA40_LCHAN_SRC_PHY_DST_LOG, - STEDMA40_LCHAN_SRC_LOG_DST_PHY, -}; - -#define STEDMA40_ESIZE_8_BIT 0x0 -#define STEDMA40_ESIZE_16_BIT 0x1 -#define STEDMA40_ESIZE_32_BIT 0x2 -#define STEDMA40_ESIZE_64_BIT 0x3 - -/* The value 4 indicates that PEN-reg shall be set to 0 */ -#define STEDMA40_PSIZE_PHY_1 0x4 -#define STEDMA40_PSIZE_PHY_2 0x0 -#define STEDMA40_PSIZE_PHY_4 0x1 -#define STEDMA40_PSIZE_PHY_8 0x2 -#define STEDMA40_PSIZE_PHY_16 0x3 - -/* - * The number of elements differ in logical and - * physical mode - */ -#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 -#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 -#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 -#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 - -/* Maximum number of possible physical channels */ -#define STEDMA40_MAX_PHYS 32 - -enum stedma40_flow_ctrl { - STEDMA40_NO_FLOW_CTRL, - STEDMA40_FLOW_CTRL, -}; - -enum stedma40_periph_data_width { - STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, - STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, - STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, - STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT -}; - -enum stedma40_xfer_dir { - STEDMA40_MEM_TO_MEM = 1, - STEDMA40_MEM_TO_PERIPH, - STEDMA40_PERIPH_TO_MEM, - STEDMA40_PERIPH_TO_PERIPH -}; - - -/** - * struct stedma40_chan_cfg - dst/src channel configuration - * - * @big_endian: true if the src/dst should be read as big endian - * @data_width: Data width of the src/dst hardware - * @p_size: Burst size - * @flow_ctrl: Flow control on/off. - */ -struct stedma40_half_channel_info { - bool big_endian; - enum stedma40_periph_data_width data_width; - int psize; - enum stedma40_flow_ctrl flow_ctrl; -}; - -/** - * struct stedma40_chan_cfg - Structure to be filled by client drivers. - * - * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH - * @high_priority: true if high-priority - * @realtime: true if realtime mode is to be enabled. Only available on DMA40 - * version 3+, i.e DB8500v2+ - * @mode: channel mode: physical, logical, or operation - * @mode_opt: options for the chosen channel mode - * @src_dev_type: Src device type - * @dst_dev_type: Dst device type - * @src_info: Parameters for dst half channel - * @dst_info: Parameters for dst half channel - * @use_fixed_channel: if true, use physical channel specified by phy_channel - * @phy_channel: physical channel to use, only if use_fixed_channel is true - * - * This structure has to be filled by the client drivers. - * It is recommended to do all dma configurations for clients in the machine. - * - */ -struct stedma40_chan_cfg { - enum stedma40_xfer_dir dir; - bool high_priority; - bool realtime; - enum stedma40_mode mode; - enum stedma40_mode_opt mode_opt; - int src_dev_type; - int dst_dev_type; - struct stedma40_half_channel_info src_info; - struct stedma40_half_channel_info dst_info; - - bool use_fixed_channel; - int phy_channel; -}; - -/** - * struct stedma40_platform_data - Configuration struct for the dma device. - * - * @dev_len: length of dev_tx and dev_rx - * @dev_tx: mapping between destination event line and io address - * @dev_rx: mapping between source event line and io address - * @memcpy: list of memcpy event lines - * @memcpy_len: length of memcpy - * @memcpy_conf_phy: default configuration of physical channel memcpy - * @memcpy_conf_log: default configuration of logical channel memcpy - * @disabled_channels: A vector, ending with -1, that marks physical channels - * that are for different reasons not available for the driver. - */ -struct stedma40_platform_data { - u32 dev_len; - const dma_addr_t *dev_tx; - const dma_addr_t *dev_rx; - int *memcpy; - u32 memcpy_len; - struct stedma40_chan_cfg *memcpy_conf_phy; - struct stedma40_chan_cfg *memcpy_conf_log; - int disabled_channels[STEDMA40_MAX_PHYS]; - bool use_esram_lcla; -}; - -#ifdef CONFIG_STE_DMA40 - -/** - * stedma40_filter() - Provides stedma40_chan_cfg to the - * ste_dma40 dma driver via the dmaengine framework. - * does some checking of what's provided. - * - * Never directly called by client. It used by dmaengine. - * @chan: dmaengine handle. - * @data: Must be of type: struct stedma40_chan_cfg and is - * the configuration of the framework. - * - * - */ - -bool stedma40_filter(struct dma_chan *chan, void *data); - -/** - * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave - * (=device) - * - * @chan: dmaengine handle - * @addr: source or destination physicall address. - * @size: bytes to transfer - * @direction: direction of transfer - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - struct scatterlist sg; - sg_init_table(&sg, 1); - sg.dma_address = addr; - sg.length = size; - - return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); -} - -#else -static inline bool stedma40_filter(struct dma_chan *chan, void *data) -{ - return false; -} - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - return NULL; -} -#endif - -#endif diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c deleted file mode 100644 index 9222e5522a43..000000000000 --- a/arch/arm/plat-nomadik/timer.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * linux/arch/arm/plat-nomadik/timer.c - * - * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2010 Alessandro Rubini - * Copyright (C) 2010 Linus Walleij for ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/jiffies.h> -#include <linux/err.h> -#include <asm/mach/time.h> -#include <asm/sched_clock.h> - -/* - * The MTU device hosts four different counters, with 4 set of - * registers. These are register names. - */ - -#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ -#define MTU_RIS 0x04 /* Raw interrupt status */ -#define MTU_MIS 0x08 /* Masked interrupt status */ -#define MTU_ICR 0x0C /* Interrupt clear register */ - -/* per-timer registers take 0..3 as argument */ -#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ -#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ -#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ -#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ - -/* bits for the control register */ -#define MTU_CRn_ENA 0x80 -#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ -#define MTU_CRn_PRESCALE_MASK 0x0c -#define MTU_CRn_PRESCALE_1 0x00 -#define MTU_CRn_PRESCALE_16 0x04 -#define MTU_CRn_PRESCALE_256 0x08 -#define MTU_CRn_32BITS 0x02 -#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ - -/* Other registers are usual amba/primecell registers, currently not used */ -#define MTU_ITCR 0xff0 -#define MTU_ITOP 0xff4 - -#define MTU_PERIPH_ID0 0xfe0 -#define MTU_PERIPH_ID1 0xfe4 -#define MTU_PERIPH_ID2 0xfe8 -#define MTU_PERIPH_ID3 0xfeC - -#define MTU_PCELL0 0xff0 -#define MTU_PCELL1 0xff4 -#define MTU_PCELL2 0xff8 -#define MTU_PCELL3 0xffC - -static void __iomem *mtu_base; -static bool clkevt_periodic; -static u32 clk_prescale; -static u32 nmdk_cycle; /* write-once */ - -#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK -/* - * Override the global weak sched_clock symbol with this - * local implementation which uses the clocksource to get some - * better resolution when scheduling the kernel. - */ -static u32 notrace nomadik_read_sched_clock(void) -{ - if (unlikely(!mtu_base)) - return 0; - - return -readl(mtu_base + MTU_VAL(0)); -} -#endif - -/* Clockevent device: use one-shot mode */ -static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) -{ - writel(1 << 1, mtu_base + MTU_IMSC); - writel(evt, mtu_base + MTU_LR(1)); - /* Load highest value, enable device, enable interrupts */ - writel(MTU_CRn_ONESHOT | clk_prescale | - MTU_CRn_32BITS | MTU_CRn_ENA, - mtu_base + MTU_CR(1)); - - return 0; -} - -void nmdk_clkevt_reset(void) -{ - if (clkevt_periodic) { - /* Timer: configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(1)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(1)); - - writel(MTU_CRn_PERIODIC | clk_prescale | - MTU_CRn_32BITS | MTU_CRn_ENA, - mtu_base + MTU_CR(1)); - writel(1 << 1, mtu_base + MTU_IMSC); - } else { - /* Generate an interrupt to start the clockevent again */ - (void) nmdk_clkevt_next(nmdk_cycle, NULL); - } -} - -static void nmdk_clkevt_mode(enum clock_event_mode mode, - struct clock_event_device *dev) -{ - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - clkevt_periodic = true; - nmdk_clkevt_reset(); - break; - case CLOCK_EVT_MODE_ONESHOT: - clkevt_periodic = false; - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - writel(0, mtu_base + MTU_IMSC); - /* disable timer */ - writel(0, mtu_base + MTU_CR(1)); - /* load some high default value */ - writel(0xffffffff, mtu_base + MTU_LR(1)); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device nmdk_clkevt = { - .name = "mtu_1", - .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, - .rating = 200, - .set_mode = nmdk_clkevt_mode, - .set_next_event = nmdk_clkevt_next, -}; - -/* - * IRQ Handler for timer 1 of the MTU block. - */ -static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evdev = dev_id; - - writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */ - evdev->event_handler(evdev); - return IRQ_HANDLED; -} - -static struct irqaction nmdk_timer_irq = { - .name = "Nomadik Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = nmdk_timer_interrupt, - .dev_id = &nmdk_clkevt, -}; - -void nmdk_clksrc_reset(void) -{ - /* Disable */ - writel(0, mtu_base + MTU_CR(0)); - - /* ClockSource: configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - - writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, - mtu_base + MTU_CR(0)); -} - -void __init nmdk_timer_init(void __iomem *base) -{ - unsigned long rate; - struct clk *clk0; - - mtu_base = base; - clk0 = clk_get_sys("mtu0", NULL); - BUG_ON(IS_ERR(clk0)); - BUG_ON(clk_prepare(clk0) < 0); - BUG_ON(clk_enable(clk0) < 0); - - /* - * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz - * for ux500. - * Use a divide-by-16 counter if the tick rate is more than 32MHz. - * At 32 MHz, the timer (with 32 bit counter) can be programmed - * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer - * with 16 gives too low timer resolution. - */ - rate = clk_get_rate(clk0); - if (rate > 32000000) { - rate /= 16; - clk_prescale = MTU_CRn_PRESCALE_16; - } else { - clk_prescale = MTU_CRn_PRESCALE_1; - } - - nmdk_cycle = (rate + HZ/2) / HZ; - - - /* Timer 0 is the free running clocksource */ - nmdk_clksrc_reset(); - - if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0", - rate, 200, 32, clocksource_mmio_readl_down)) - pr_err("timer: failed to initialize clock source %s\n", - "mtu_0"); - -#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK - setup_sched_clock(nomadik_read_sched_clock, 32, rate); -#endif - - /* Timer 1 is used for events, register irq and clockevents */ - setup_irq(IRQ_MTU0, &nmdk_timer_irq); - nmdk_clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU); -} diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h deleted file mode 100644 index 68b5f0362f35..000000000000 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ /dev/null @@ -1,221 +0,0 @@ -/* - * omap iommu: main structures - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IOMMU_H -#define __MACH_IOMMU_H - -struct iotlb_entry { - u32 da; - u32 pa; - u32 pgsz, prsvd, valid; - union { - u16 ap; - struct { - u32 endian, elsz, mixed; - }; - }; -}; - -struct omap_iommu { - const char *name; - struct module *owner; - struct clk *clk; - void __iomem *regbase; - struct device *dev; - void *isr_priv; - struct iommu_domain *domain; - - unsigned int refcount; - spinlock_t iommu_lock; /* global for this whole object */ - - /* - * We don't change iopgd for a situation like pgd for a task, - * but share it globally for each iommu. - */ - u32 *iopgd; - spinlock_t page_table_lock; /* protect iopgd */ - - int nr_tlb_entries; - - struct list_head mmap; - struct mutex mmap_lock; /* protect mmap */ - - void *ctx; /* iommu context: registres saved area */ - u32 da_start; - u32 da_end; -}; - -struct cr_regs { - union { - struct { - u16 cam_l; - u16 cam_h; - }; - u32 cam; - }; - union { - struct { - u16 ram_l; - u16 ram_h; - }; - u32 ram; - }; -}; - -struct iotlb_lock { - short base; - short vict; -}; - -/* architecture specific functions */ -struct iommu_functions { - unsigned long version; - - int (*enable)(struct omap_iommu *obj); - void (*disable)(struct omap_iommu *obj); - void (*set_twl)(struct omap_iommu *obj, bool on); - u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra); - - void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr); - void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr); - - struct cr_regs *(*alloc_cr)(struct omap_iommu *obj, - struct iotlb_entry *e); - int (*cr_valid)(struct cr_regs *cr); - u32 (*cr_to_virt)(struct cr_regs *cr); - void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); - ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr, - char *buf); - - u32 (*get_pte_attr)(struct iotlb_entry *e); - - void (*save_ctx)(struct omap_iommu *obj); - void (*restore_ctx)(struct omap_iommu *obj); - ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len); -}; - -/** - * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod - * @da_start: device address where the va space starts. - * @da_end: device address where the va space ends. - * @nr_tlb_entries: number of entries supported by the translation - * look-aside buffer (TLB). - */ -struct omap_mmu_dev_attr { - u32 da_start; - u32 da_end; - int nr_tlb_entries; -}; - -struct iommu_platform_data { - const char *name; - const char *clk_name; - const int nr_tlb_entries; - u32 da_start; - u32 da_end; -}; - -/** - * struct iommu_arch_data - omap iommu private data - * @name: name of the iommu device - * @iommu_dev: handle of the iommu device - * - * This is an omap iommu private data object, which binds an iommu user - * to its iommu device. This object should be placed at the iommu user's - * dev_archdata so generic IOMMU API can be used without having to - * utilize omap-specific plumbing anymore. - */ -struct omap_iommu_arch_data { - const char *name; - struct omap_iommu *iommu_dev; -}; - -#ifdef CONFIG_IOMMU_API -/** - * dev_to_omap_iommu() - retrieves an omap iommu object from a user device - * @dev: iommu client device - */ -static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev) -{ - struct omap_iommu_arch_data *arch_data = dev->archdata.iommu; - - return arch_data->iommu_dev; -} -#endif - -/* IOMMU errors */ -#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0) -#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1) -#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2) -#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3) -#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4) - -#if defined(CONFIG_ARCH_OMAP1) -#error "iommu for this processor not implemented yet" -#else -#include <plat/iommu2.h> -#endif - -/* - * utilities for super page(16MB, 1MB, 64KB and 4KB) - */ - -#define iopgsz_max(bytes) \ - (((bytes) >= SZ_16M) ? SZ_16M : \ - ((bytes) >= SZ_1M) ? SZ_1M : \ - ((bytes) >= SZ_64K) ? SZ_64K : \ - ((bytes) >= SZ_4K) ? SZ_4K : 0) - -#define bytes_to_iopgsz(bytes) \ - (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \ - ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \ - ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \ - ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1) - -#define iopgsz_to_bytes(iopgsz) \ - (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \ - ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \ - ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \ - ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0) - -#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0) - -/* - * global functions - */ -extern u32 omap_iommu_arch_version(void); - -extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); - -extern int -omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e); - -extern int omap_iommu_set_isr(const char *name, - int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs, - void *priv), - void *isr_priv); - -extern void omap_iommu_save_ctx(struct device *dev); -extern void omap_iommu_restore_ctx(struct device *dev); - -extern int omap_install_iommu_arch(const struct iommu_functions *ops); -extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops); - -extern int omap_foreach_iommu_device(void *data, - int (*fn)(struct device *, void *)); - -extern ssize_t -omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len); -extern size_t -omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len); - -#endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h deleted file mode 100644 index d4116b595e40..000000000000 --- a/arch/arm/plat-omap/include/plat/iommu2.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * omap iommu: omap2 architecture specific definitions - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IOMMU2_H -#define __MACH_IOMMU2_H - -#include <linux/io.h> - -/* - * MMU Register offsets - */ -#define MMU_REVISION 0x00 -#define MMU_SYSCONFIG 0x10 -#define MMU_SYSSTATUS 0x14 -#define MMU_IRQSTATUS 0x18 -#define MMU_IRQENABLE 0x1c -#define MMU_WALKING_ST 0x40 -#define MMU_CNTL 0x44 -#define MMU_FAULT_AD 0x48 -#define MMU_TTB 0x4c -#define MMU_LOCK 0x50 -#define MMU_LD_TLB 0x54 -#define MMU_CAM 0x58 -#define MMU_RAM 0x5c -#define MMU_GFLUSH 0x60 -#define MMU_FLUSH_ENTRY 0x64 -#define MMU_READ_CAM 0x68 -#define MMU_READ_RAM 0x6c -#define MMU_EMU_FAULT_AD 0x70 - -#define MMU_REG_SIZE 256 - -/* - * MMU Register bit definitions - */ -#define MMU_LOCK_BASE_SHIFT 10 -#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT) -#define MMU_LOCK_BASE(x) \ - ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT) - -#define MMU_LOCK_VICT_SHIFT 4 -#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT) -#define MMU_LOCK_VICT(x) \ - ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT) - -#define MMU_CAM_VATAG_SHIFT 12 -#define MMU_CAM_VATAG_MASK \ - ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT) -#define MMU_CAM_P (1 << 3) -#define MMU_CAM_V (1 << 2) -#define MMU_CAM_PGSZ_MASK 3 -#define MMU_CAM_PGSZ_1M (0 << 0) -#define MMU_CAM_PGSZ_64K (1 << 0) -#define MMU_CAM_PGSZ_4K (2 << 0) -#define MMU_CAM_PGSZ_16M (3 << 0) - -#define MMU_RAM_PADDR_SHIFT 12 -#define MMU_RAM_PADDR_MASK \ - ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT) -#define MMU_RAM_ENDIAN_SHIFT 9 -#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ELSZ_SHIFT 7 -#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_MIXED_SHIFT 6 -#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT) -#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK - -/* - * register accessors - */ -static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs) -{ - return __raw_readl(obj->regbase + offs); -} - -static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs) -{ - __raw_writel(val, obj->regbase + offs); -} - -#endif /* __MACH_IOMMU2_H */ diff --git a/arch/arm/plat-omap/include/plat/iopgtable.h b/arch/arm/plat-omap/include/plat/iopgtable.h deleted file mode 100644 index 66a813977d52..000000000000 --- a/arch/arm/plat-omap/include/plat/iopgtable.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * omap iommu: pagetable definitions - * - * Copyright (C) 2008-2010 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_OMAP_IOMMU_H -#define __PLAT_OMAP_IOMMU_H - -/* - * "L2 table" address mask and size definitions. - */ -#define IOPGD_SHIFT 20 -#define IOPGD_SIZE (1UL << IOPGD_SHIFT) -#define IOPGD_MASK (~(IOPGD_SIZE - 1)) - -/* - * "section" address mask and size definitions. - */ -#define IOSECTION_SHIFT 20 -#define IOSECTION_SIZE (1UL << IOSECTION_SHIFT) -#define IOSECTION_MASK (~(IOSECTION_SIZE - 1)) - -/* - * "supersection" address mask and size definitions. - */ -#define IOSUPER_SHIFT 24 -#define IOSUPER_SIZE (1UL << IOSUPER_SHIFT) -#define IOSUPER_MASK (~(IOSUPER_SIZE - 1)) - -#define PTRS_PER_IOPGD (1UL << (32 - IOPGD_SHIFT)) -#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32)) - -/* - * "small page" address mask and size definitions. - */ -#define IOPTE_SHIFT 12 -#define IOPTE_SIZE (1UL << IOPTE_SHIFT) -#define IOPTE_MASK (~(IOPTE_SIZE - 1)) - -/* - * "large page" address mask and size definitions. - */ -#define IOLARGE_SHIFT 16 -#define IOLARGE_SIZE (1UL << IOLARGE_SHIFT) -#define IOLARGE_MASK (~(IOLARGE_SIZE - 1)) - -#define PTRS_PER_IOPTE (1UL << (IOPGD_SHIFT - IOPTE_SHIFT)) -#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32)) - -#define IOPAGE_MASK IOPTE_MASK - -/** - * omap_iommu_translate() - va to pa translation - * @d: omap iommu descriptor - * @va: virtual address - * @mask: omap iommu descriptor mask - * - * va to pa translation - */ -static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask) -{ - return (d & mask) | (va & (~mask)); -} - -/* - * some descriptor attributes. - */ -#define IOPGD_TABLE (1 << 0) -#define IOPGD_SECTION (2 << 0) -#define IOPGD_SUPER (1 << 18 | 2 << 0) - -#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE) -#define iopgd_is_section(x) (((x) & (1 << 18 | 3)) == IOPGD_SECTION) -#define iopgd_is_super(x) (((x) & (1 << 18 | 3)) == IOPGD_SUPER) - -#define IOPTE_SMALL (2 << 0) -#define IOPTE_LARGE (1 << 0) - -#define iopte_is_small(x) (((x) & 2) == IOPTE_SMALL) -#define iopte_is_large(x) (((x) & 3) == IOPTE_LARGE) - -/* to find an entry in a page-table-directory */ -#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1)) -#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da)) - -#define iopgd_page_paddr(iopgd) (*iopgd & ~((1 << 10) - 1)) -#define iopgd_page_vaddr(iopgd) ((u32 *)phys_to_virt(iopgd_page_paddr(iopgd))) - -/* to find an entry in the second-level page table. */ -#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1)) -#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da)) - -static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa, - u32 flags) -{ - memset(e, 0, sizeof(*e)); - - e->da = da; - e->pa = pa; - e->valid = 1; - /* FIXME: add OMAP1 support */ - e->pgsz = flags & MMU_CAM_PGSZ_MASK; - e->endian = flags & MMU_RAM_ENDIAN_MASK; - e->elsz = flags & MMU_RAM_ELSZ_MASK; - e->mixed = flags & MMU_RAM_MIXED_MASK; - - return iopgsz_to_bytes(e->pgsz); -} - -#define to_iommu(dev) \ - (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev)) - -#endif /* __PLAT_OMAP_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h deleted file mode 100644 index 498e57cda6cd..000000000000 --- a/arch/arm/plat-omap/include/plat/iovmm.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * omap iommu: simple virtual address space management - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOMMU_MMAP_H -#define __IOMMU_MMAP_H - -#include <linux/iommu.h> - -struct iovm_struct { - struct omap_iommu *iommu; /* iommu object which this belongs to */ - u32 da_start; /* area definition */ - u32 da_end; - u32 flags; /* IOVMF_: see below */ - struct list_head list; /* linked in ascending order */ - const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ - void *va; /* mpu side mapped address */ -}; - -/* - * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma) - * - * lower 16 bit is used for h/w and upper 16 bit is for s/w. - */ -#define IOVMF_SW_SHIFT 16 - -/* - * iovma: h/w flags derived from cam and ram attribute - */ -#define IOVMF_CAM_MASK (~((1 << 10) - 1)) -#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK) - -#define IOVMF_PGSZ_MASK (3 << 0) -#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M -#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K -#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K -#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M - -#define IOVMF_ENDIAN_MASK (1 << 9) -#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG -#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE - -#define IOVMF_ELSZ_MASK (3 << 7) -#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 -#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16 -#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32 -#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE - -#define IOVMF_MIXED_MASK (1 << 6) -#define IOVMF_MIXED MMU_RAM_MIXED - -/* - * iovma: s/w flags, used for mapping and umapping internally. - */ -#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT) -#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT) -#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT) - -/* "superpages" is supported just with physically linear pages */ -#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT)) -#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT)) -#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT)) - -#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) - - -extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da); -extern u32 -omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da, - const struct sg_table *sgt, u32 flags); -extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain, - struct device *dev, u32 da); -extern u32 -omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev, - u32 da, size_t bytes, u32 flags); -extern void -omap_iommu_vfree(struct iommu_domain *domain, struct device *dev, - const u32 da); -extern void *omap_da_to_va(struct device *dev, u32 da); - -#endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1957a8516e93..ff9b0aab5281 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -30,35 +30,6 @@ */ #define OMAP_SERIAL_NAME "ttyO" -#define OMAP_MODE13X_SPEED 230400 - -#define OMAP_UART_SCR_TX_EMPTY 0x08 - -/* WER = 0x7F - * Enable module level wakeup in WER reg - */ -#define OMAP_UART_WER_MOD_WKUP 0X7F - -/* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 - -/* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 - -#define OMAP_UART_SYSC_RESET 0X07 -#define OMAP_UART_TCR_TRIG 0X0F -#define OMAP_UART_SW_CLR 0XF0 -#define OMAP_UART_FIFO_CLR 0X06 - -#define OMAP_UART_DMA_CH_FREE -1 - -#define OMAP_MAX_HSUART_PORTS 6 - -#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA - -#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) -#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) - struct omap_uart_port_info { bool dma_enabled; /* To specify DMA Mode */ unsigned int uartclk; /* UART clock rate */ @@ -77,30 +48,4 @@ struct omap_uart_port_info { void (*enable_wakeup)(struct device *, bool); }; -struct uart_omap_dma { - u8 uart_dma_tx; - u8 uart_dma_rx; - int rx_dma_channel; - int tx_dma_channel; - dma_addr_t rx_buf_dma_phys; - dma_addr_t tx_buf_dma_phys; - unsigned int uart_base; - /* - * Buffer for rx dma.It is not required for tx because the buffer - * comes from port structure. - */ - unsigned char *rx_buf; - unsigned int prev_rx_dma_pos; - int tx_buf_size; - int tx_dma_used; - int rx_dma_used; - spinlock_t tx_lock; - spinlock_t rx_lock; - /* timer to poll activity on rx dma */ - struct timer_list rx_timer; - unsigned int rx_buf_size; - unsigned int rx_poll_rate; - unsigned int rx_timeout; -}; - #endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index db98e7021f0d..0abd1c469887 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -473,12 +473,13 @@ int s3c2410_dma_enqueue(enum dma_ch channel, void *id, pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", chan->number, __func__, buf); - if (chan->end == NULL) + if (chan->end == NULL) { pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", chan->number, __func__, chan); - - chan->end->next = buf; - chan->end = buf; + } else { + chan->end->next = buf; + chan->end = buf; + } } /* if necessary, update the next buffer field */ diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 59401e1cc530..a9d52167e16e 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -414,6 +414,11 @@ config S5P_SETUP_MIPIPHY help Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices +config S3C_SETUP_CAMIF + bool + help + Compile in common setup code for S3C CAMIF devices + # DMA config S3C_DMA @@ -502,5 +507,6 @@ config DEBUG_S3C_UART default "0" if DEBUG_S3C_UART0 default "1" if DEBUG_S3C_UART1 default "2" if DEBUG_S3C_UART2 + default "3" if DEBUG_S3C_UART3 endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 9e40e8d00740..3a7c64d1814a 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o +obj-$(CONFIG_S3C_SETUP_CAMIF) += setup-camif.o obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o # DMA support diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index ace4451b7651..e0072ce8d6e9 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -43,6 +43,7 @@ extern unsigned long samsung_cpu_id; #define EXYNOS4_CPU_MASK 0xFFFE0000 #define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5440_SOC_ID 0x54400000 #define EXYNOS5_SOC_MASK 0xFFFFF000 #define IS_SAMSUNG_CPU(name, id, mask) \ @@ -62,6 +63,7 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ @@ -130,6 +132,12 @@ IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos5250() 0 #endif +#if defined(CONFIG_SOC_EXYNOS5440) +# define soc_is_exynos5440() is_samsung_exynos5440() +#else +# define soc_is_exynos5440() 0 +#endif + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef KHZ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 133e3e4170fb..f53beba2b63d 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -123,7 +123,6 @@ extern struct platform_device s5pv210_device_spdif; extern struct platform_device exynos4_device_ac97; extern struct platform_device exynos4_device_ahci; -extern struct platform_device exynos4_device_dwmci; extern struct platform_device exynos4_device_i2s0; extern struct platform_device exynos4_device_i2s1; extern struct platform_device exynos4_device_i2s2; diff --git a/arch/arm/plat-samsung/setup-camif.c b/arch/arm/plat-samsung/setup-camif.c new file mode 100644 index 000000000000..e01bf760af2c --- /dev/null +++ b/arch/arm/plat-samsung/setup-camif.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com> + * + * Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +/* Number of camera port pins, without FIELD */ +#define S3C_CAMIF_NUM_GPIOS 13 + +/* Default camera port configuration helpers. */ + +static void camif_get_gpios(int *gpio_start, int *gpio_reset) +{ +#ifdef CONFIG_ARCH_S3C24XX + *gpio_start = S3C2410_GPJ(0); + *gpio_reset = S3C2410_GPJ(12); +#else + /* s3c64xx */ + *gpio_start = S3C64XX_GPF(0); + *gpio_reset = S3C64XX_GPF(3); +#endif +} + +int s3c_camif_gpio_get(void) +{ + int gpio_start, gpio_reset; + int ret, i; + + camif_get_gpios(&gpio_start, &gpio_reset); + + for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) { + int gpio = gpio_start + i; + + if (gpio == gpio_reset) + continue; + + ret = gpio_request(gpio, "camif"); + if (!ret) + ret = s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + if (ret) { + pr_err("failed to configure GPIO %d\n", gpio); + for (--i; i >= 0; i--) + gpio_free(gpio--); + return ret; + } + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + return 0; +} + +void s3c_camif_gpio_put(void) +{ + int i, gpio_start, gpio_reset; + + camif_get_gpios(&gpio_start, &gpio_reset); + + for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) { + int gpio = gpio_start + i; + if (gpio != gpio_reset) + gpio_free(gpio); + } +} diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index f8db7b2deb36..87dbd81bdf51 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -12,6 +12,7 @@ config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" select ARM_GIC select CPU_V7 + select GPIO_SPEAR_SPICS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select PINCTRL diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 2a4ae8a6a081..2c4332b9f948 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -6,20 +6,11 @@ config PLAT_VERSATILE_CLOCK config PLAT_VERSATILE_CLCD bool -config PLAT_VERSATILE_FPGA_IRQ - bool - select IRQ_DOMAIN - -config PLAT_VERSATILE_FPGA_IRQ_NR - int - default 4 - depends on PLAT_VERSATILE_FPGA_IRQ - config PLAT_VERSATILE_LEDS def_bool y if NEW_LEDS depends on ARCH_REALVIEW || ARCH_VERSATILE select LEDS_CLASS - select LEDS_TRIGGER + select LEDS_TRIGGERS config PLAT_VERSATILE_SCHED_CLOCK def_bool y diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 74cfd94cbf80..f88d448b629c 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -2,7 +2,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o -obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c deleted file mode 100644 index 091ae1030045..000000000000 --- a/arch/arm/plat-versatile/fpga-irq.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Support for Versatile FPGA-based IRQ controllers - */ -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/irqdomain.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include <asm/exception.h> -#include <asm/mach/irq.h> -#include <plat/fpga-irq.h> - -#define IRQ_STATUS 0x00 -#define IRQ_RAW_STATUS 0x04 -#define IRQ_ENABLE_SET 0x08 -#define IRQ_ENABLE_CLEAR 0x0c -#define INT_SOFT_SET 0x10 -#define INT_SOFT_CLEAR 0x14 -#define FIQ_STATUS 0x20 -#define FIQ_RAW_STATUS 0x24 -#define FIQ_ENABLE 0x28 -#define FIQ_ENABLE_SET 0x28 -#define FIQ_ENABLE_CLEAR 0x2C - -/** - * struct fpga_irq_data - irq data container for the FPGA IRQ controller - * @base: memory offset in virtual memory - * @chip: chip container for this instance - * @domain: IRQ domain for this instance - * @valid: mask for valid IRQs on this controller - * @used_irqs: number of active IRQs on this controller - */ -struct fpga_irq_data { - void __iomem *base; - struct irq_chip chip; - u32 valid; - struct irq_domain *domain; - u8 used_irqs; -}; - -/* we cannot allocate memory when the controllers are initially registered */ -static struct fpga_irq_data fpga_irq_devices[CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR]; -static int fpga_irq_id; - -static void fpga_irq_mask(struct irq_data *d) -{ - struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); - u32 mask = 1 << d->hwirq; - - writel(mask, f->base + IRQ_ENABLE_CLEAR); -} - -static void fpga_irq_unmask(struct irq_data *d) -{ - struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); - u32 mask = 1 << d->hwirq; - - writel(mask, f->base + IRQ_ENABLE_SET); -} - -static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc) -{ - struct fpga_irq_data *f = irq_desc_get_handler_data(desc); - u32 status = readl(f->base + IRQ_STATUS); - - if (status == 0) { - do_bad_IRQ(irq, desc); - return; - } - - do { - irq = ffs(status) - 1; - status &= ~(1 << irq); - generic_handle_irq(irq_find_mapping(f->domain, irq)); - } while (status); -} - -/* - * Handle each interrupt in a single FPGA IRQ controller. Returns non-zero - * if we've handled at least one interrupt. This does a single read of the - * status register and handles all interrupts in order from LSB first. - */ -static int handle_one_fpga(struct fpga_irq_data *f, struct pt_regs *regs) -{ - int handled = 0; - int irq; - u32 status; - - while ((status = readl(f->base + IRQ_STATUS))) { - irq = ffs(status) - 1; - handle_IRQ(irq_find_mapping(f->domain, irq), regs); - handled = 1; - } - - return handled; -} - -/* - * Keep iterating over all registered FPGA IRQ controllers until there are - * no pending interrupts. - */ -asmlinkage void __exception_irq_entry fpga_handle_irq(struct pt_regs *regs) -{ - int i, handled; - - do { - for (i = 0, handled = 0; i < fpga_irq_id; ++i) - handled |= handle_one_fpga(&fpga_irq_devices[i], regs); - } while (handled); -} - -static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hwirq) -{ - struct fpga_irq_data *f = d->host_data; - - /* Skip invalid IRQs, only register handlers for the real ones */ - if (!(f->valid & (1 << hwirq))) - return -ENOTSUPP; - irq_set_chip_data(irq, f); - irq_set_chip_and_handler(irq, &f->chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - f->used_irqs++; - return 0; -} - -static struct irq_domain_ops fpga_irqdomain_ops = { - .map = fpga_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -static __init struct fpga_irq_data * -fpga_irq_prep_struct(void __iomem *base, const char *name, u32 valid) { - struct fpga_irq_data *f; - - if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) { - printk(KERN_ERR "%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__); - return NULL; - } - f = &fpga_irq_devices[fpga_irq_id]; - f->base = base; - f->chip.name = name; - f->chip.irq_ack = fpga_irq_mask; - f->chip.irq_mask = fpga_irq_mask; - f->chip.irq_unmask = fpga_irq_unmask; - f->valid = valid; - fpga_irq_id++; - - return f; -} - -void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, - int parent_irq, u32 valid, struct device_node *node) -{ - struct fpga_irq_data *f; - - f = fpga_irq_prep_struct(base, name, valid); - if (!f) - return; - - if (parent_irq != -1) { - irq_set_handler_data(parent_irq, f); - irq_set_chained_handler(parent_irq, fpga_irq_handle); - } - - f->domain = irq_domain_add_legacy(node, fls(valid), irq_start, 0, - &fpga_irqdomain_ops, f); - pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", - fpga_irq_id, name, base, f->used_irqs); -} - -#ifdef CONFIG_OF -int __init fpga_irq_of_init(struct device_node *node, - struct device_node *parent) -{ - struct fpga_irq_data *f; - void __iomem *base; - u32 clear_mask; - u32 valid_mask; - - if (WARN_ON(!node)) - return -ENODEV; - - base = of_iomap(node, 0); - WARN(!base, "unable to map fpga irq registers\n"); - - if (of_property_read_u32(node, "clear-mask", &clear_mask)) - clear_mask = 0; - - if (of_property_read_u32(node, "valid-mask", &valid_mask)) - valid_mask = 0; - - f = fpga_irq_prep_struct(base, node->name, valid_mask); - if (!f) - return -ENOMEM; - - writel(clear_mask, base + IRQ_ENABLE_CLEAR); - writel(clear_mask, base + FIQ_ENABLE_CLEAR); - - f->domain = irq_domain_add_linear(node, fls(valid_mask), &fpga_irqdomain_ops, f); - f->used_irqs = hweight32(valid_mask); - - pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", - fpga_irq_id, node->name, base, f->used_irqs); - return 0; -} -#endif diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h deleted file mode 100644 index 1fac9651d3ca..000000000000 --- a/arch/arm/plat-versatile/include/plat/fpga-irq.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef PLAT_FPGA_IRQ_H -#define PLAT_FPGA_IRQ_H - -struct device_node; -struct pt_regs; - -void fpga_handle_irq(struct pt_regs *regs); -void fpga_irq_init(void __iomem *, const char *, int, int, u32, - struct device_node *node); -int fpga_irq_of_init(struct device_node *node, - struct device_node *parent); - -#endif |
