diff options
Diffstat (limited to 'arch/arm')
351 files changed, 7959 insertions, 5580 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067efd4845..041cf0774776 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -937,7 +937,6 @@ config ARCH_OMAP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK - select NEED_MACH_GPIO_H help Support for TI's OMAP platform (OMAP1/2/3/4). @@ -1603,8 +1602,8 @@ config NR_CPUS default "4" config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1645,8 +1644,8 @@ config HZ default 100 config THUMB2_KERNEL - bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" - depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL + bool "Compile the kernel in Thumb-2 mode" + depends on CPU_V7 && !CPU_V6 && !CPU_V6K select AEABI select ARM_ASM_UNIFIED select ARM_UNWIND @@ -1850,6 +1849,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" depends on EXPERIMENTAL && ARM && OF + depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f023e3acdfbd..5f914fca911b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -21,8 +21,6 @@ endif OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe -# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: -KBUILD_CFLAGS +=$(call cc-option,-marm,) # Never generate .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) @@ -105,17 +103,20 @@ endif ifeq ($(CONFIG_THUMB2_KERNEL),y) AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) -CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) -AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb +CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) +AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) CFLAGS_MODULE +=-fno-optimize-sibling-calls endif +else +CFLAGS_ISA :=$(call cc-option,-marm,) +AFLAGS_ISA :=$(CFLAGS_ISA) endif # Need -Uarm for gcc < 3.x -KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm -KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float +KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm +KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 3fdab016aa5c..f2aa09eb658e 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' endif @@ -90,7 +90,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @echo ' Image $@ is ready' + $(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..2458b69e2be6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -63,15 +63,17 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-m28evk.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3-beagle.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ - omap4-pandaES.dtb \ - omap4-var_som.dtb \ + omap4-panda-es.dtb \ + omap4-var-som.dtb \ omap4-sdp.dtb \ omap5-evm.dtb \ am335x-evm.dtb \ + am335x-evmsk.dtb \ am335x-bone.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87e230e..2c338889df1b 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -13,11 +13,31 @@ model = "TI AM335x BeagleBone"; compatible = "ti,am335x-bone", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -33,6 +53,36 @@ }; }; + + leds { + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio2 21 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio2 22 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio2 23 0>; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio2 24 0>; + default-state = "off"; + }; + }; }; /include/ "tps65217.dtsi" diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 185d6325a458..9f65f17ebdf8 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -13,11 +13,39 @@ model = "TI AM335x EVM"; compatible = "ti,am335x-evm", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */ + 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */ + 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */ + 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */ + >; + }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */ + 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -31,6 +59,49 @@ reg = <0x2d>; }; }; + + i2c2: i2c@4802a000 { + status = "okay"; + clock-frequency = <100000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + }; }; vbat: fixedregulator@0 { @@ -40,6 +111,53 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ + &gpio2 26 0 /* Bank1, pin26 */ + &gpio2 27 0>; /* Bank1, pin27 */ + + col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ + &gpio2 22 0>; /* Bank1, pin22 */ + + linux,keymap = <0x0000008b /* MENU */ + 0x0100009e /* BACK */ + 0x02000069 /* LEFT */ + 0x0001006a /* RIGHT */ + 0x0101001c /* ENTER */ + 0x0201006c>; /* DOWN */ + }; + + gpio_keys: volume_keys@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + switch@9 { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio1 2 1>; + gpio-key,wakeup; + }; + + switch@10 { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio1 3 1>; + gpio-key,wakeup; + }; + }; }; /include/ "tps65910.dtsi" diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts new file mode 100644 index 000000000000..f5a6162a4ff2 --- /dev/null +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -0,0 +1,250 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * AM335x Starter Kit + * http://www.ti.com/tool/tmdssk3358 + */ + +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM-SK"; + compatible = "ti,am335x-evmsk", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */ + 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */ + 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */ + 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ + >; + }; + + gpio_keys_s0: gpio_keys_s0 { + pinctrl-single,pins = < + 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */ + 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */ + 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */ + 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */ + >; + }; + }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "evmsk:green:usr0"; + gpios = <&gpio2 4 0>; + default-state = "off"; + }; + + led@2 { + label = "evmsk:green:usr1"; + gpios = <&gpio2 5 0>; + default-state = "off"; + }; + + led@3 { + label = "evmsk:green:mmc0"; + gpios = <&gpio2 6 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "evmsk:green:heartbeat"; + gpios = <&gpio2 7 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + gpio_buttons: gpio_buttons@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + switch@1 { + label = "button0"; + linux,code = <0x100>; + gpios = <&gpio3 3 0>; + }; + + switch@2 { + label = "button1"; + linux,code = <0x101>; + gpios = <&gpio3 2 0>; + }; + + switch@3 { + label = "button2"; + linux,code = <0x102>; + gpios = <&gpio1 30 0>; + gpio-key,wakeup; + }; + + switch@4 { + label = "button3"; + linux,code = <0x103>; + gpios = <&gpio3 5 0>; + }; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bb31bff01998..20a3f29a6bfe 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,am33xx"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -25,6 +26,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a8"; + + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 720000 1285000 + 600000 1225000 + 500000 1125000 + 275000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; @@ -40,6 +56,15 @@ }; }; + am33xx_pinmux: pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x44e10800 0x0238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + /* * XXX: Use a flat representation of the AM33XX interconnect. * The real AM33XX interconnect network is quite complex.Since @@ -70,7 +95,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x44e07000 0x1000>; - interrupt-parent = <&intc>; interrupts = <96>; }; @@ -82,7 +106,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x4804c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <98>; }; @@ -94,7 +117,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ac000 0x1000>; - interrupt-parent = <&intc>; interrupts = <32>; }; @@ -106,7 +128,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ae000 0x1000>; - interrupt-parent = <&intc>; interrupts = <62>; }; @@ -115,7 +136,6 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; reg = <0x44e09000 0x2000>; - interrupt-parent = <&intc>; interrupts = <72>; status = "disabled"; }; @@ -125,7 +145,6 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; reg = <0x48022000 0x2000>; - interrupt-parent = <&intc>; interrupts = <73>; status = "disabled"; }; @@ -135,7 +154,6 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; reg = <0x48024000 0x2000>; - interrupt-parent = <&intc>; interrupts = <74>; status = "disabled"; }; @@ -145,7 +163,6 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; reg = <0x481a6000 0x2000>; - interrupt-parent = <&intc>; interrupts = <44>; status = "disabled"; }; @@ -155,7 +172,6 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; reg = <0x481a8000 0x2000>; - interrupt-parent = <&intc>; interrupts = <45>; status = "disabled"; }; @@ -165,7 +181,6 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; reg = <0x481aa000 0x2000>; - interrupt-parent = <&intc>; interrupts = <46>; status = "disabled"; }; @@ -176,7 +191,6 @@ #size-cells = <0>; ti,hwmods = "i2c1"; reg = <0x44e0b000 0x1000>; - interrupt-parent = <&intc>; interrupts = <70>; status = "disabled"; }; @@ -187,7 +201,6 @@ #size-cells = <0>; ti,hwmods = "i2c2"; reg = <0x4802a000 0x1000>; - interrupt-parent = <&intc>; interrupts = <71>; status = "disabled"; }; @@ -198,7 +211,6 @@ #size-cells = <0>; ti,hwmods = "i2c3"; reg = <0x4819c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <30>; status = "disabled"; }; @@ -207,8 +219,124 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; reg = <0x44e35000 0x1000>; - interrupt-parent = <&intc>; interrupts = <91>; }; + + dcan0: d_can@481cc000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can0"; + reg = <0x481cc000 0x2000>; + interrupts = <52>; + status = "disabled"; + }; + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + status = "disabled"; + }; + + timer1: timer@44e31000 { + compatible = "ti,omap2-timer"; + reg = <0x44e31000 0x400>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,omap2-timer"; + reg = <0x48040000 0x400>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,omap2-timer"; + reg = <0x48042000 0x400>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,omap2-timer"; + reg = <0x48044000 0x400>; + interrupts = <92>; + ti,hwmods = "timer4"; + ti,timer-pwm; + }; + + timer5: timer@48046000 { + compatible = "ti,omap2-timer"; + reg = <0x48046000 0x400>; + interrupts = <93>; + ti,hwmods = "timer5"; + ti,timer-pwm; + }; + + timer6: timer@48048000 { + compatible = "ti,omap2-timer"; + reg = <0x48048000 0x400>; + interrupts = <94>; + ti,hwmods = "timer6"; + ti,timer-pwm; + }; + + timer7: timer@4804a000 { + compatible = "ti,omap2-timer"; + reg = <0x4804a000 0x400>; + interrupts = <95>; + ti,hwmods = "timer7"; + ti,timer-pwm; + }; + + rtc@44e3e000 { + compatible = "ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <75 + 76>; + ti,hwmods = "rtc"; + }; + + spi0: spi@48030000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48030000 0x400>; + interrupt = <65>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi0"; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x481a0000 0x400>; + interrupt = <125>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi1"; + status = "disabled"; + }; + + usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index b06c0db273b1..e6391a4e6649 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -126,14 +126,14 @@ #size-cells = <0>; btn3 { - label = "Buttin 3"; + label = "Button 3"; gpios = <&pioA 30 1>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { - label = "Buttin 4"; + label = "Button 4"; gpios = <&pioA 31 1>; linux,code = <0x104>; gpio-key,wakeup; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 748ba7aa746c..4b0e0ca08f40 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -483,6 +483,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -494,6 +496,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -505,6 +509,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -516,6 +522,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -527,6 +535,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -573,33 +583,38 @@ interrupts = <0 60 0x4>; status = "disabled"; }; + sdi@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; + sdi@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; + sdi@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; + sdi@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; + sdi@80008000 { compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80114000 0x1000>; + reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 73567b843e72..a21511c14071 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -20,8 +20,10 @@ compatible = "samsung,trats", "samsung,exynos4210"; memory { - reg = <0x40000000 0x20000000 - 0x60000000 0x20000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 9ca4ca70c1bc..6d31aa383460 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -69,6 +69,7 @@ interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e16d63155480..55c57ea6169e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -85,6 +85,7 @@ interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 581cb081cb0f..761c4b69b25b 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -65,5 +66,90 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; }; + + timer2: timer@4802a000 { + compatible = "ti,omap2-timer"; + reg = <0x4802a000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48078000 { + compatible = "ti,omap2-timer"; + reg = <0x48078000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@4807a000 { + compatible = "ti,omap2-timer"; + reg = <0x4807a000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@4807c000 { + compatible = "ti,omap2-timer"; + reg = <0x4807c000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4807e000 { + compatible = "ti,omap2-timer"; + reg = <0x4807e000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@48080000 { + compatible = "ti,omap2-timer"; + reg = <0x48080000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@48082000 { + compatible = "ti,omap2-timer"; + reg = <0x48082000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-dsp; + }; + + timer9: timer@48084000 { + compatible = "ti,omap2-timer"; + reg = <0x48084000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@4808a000 { + compatible = "ti,omap2-timer"; + reg = <0x4808a000 0x400>; + interrupts = <48>; + ti,hwmods = "timer12"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index bfd76b4a0ddc..af6560908905 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + counter32k: counter@48004000 { + compatible = "ti,omap-counter32k"; + reg = <0x48004000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2420_pmx: pinmux@48000030 { compatible = "ti,omap2420-padconf", "pinctrl-single"; reg = <0x48000030 0x0113>; @@ -30,7 +36,6 @@ interrupts = <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp1"; }; @@ -41,8 +46,15 @@ interrupts = <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp2"; }; + + timer1: timer@48028000 { + compatible = "ti,omap2-timer"; + reg = <0x48028000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 4565d9750f4d..c3924457c9b6 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + counter32k: counter@49020000 { + compatible = "ti,omap-counter32k"; + reg = <0x49020000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2430_pmx: pinmux@49002030 { compatible = "ti,omap2430-padconf", "pinctrl-single"; reg = <0x49002030 0x0154>; @@ -32,7 +38,6 @@ <60>, /* RX interrupt */ <61>; /* RX overflow interrupt */ interrupt-names = "common", "tx", "rx", "rx_overflow"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -45,7 +50,6 @@ <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -58,7 +62,6 @@ <89>, /* TX interrupt */ <90>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -71,7 +74,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -84,9 +86,16 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@49018000 { + compatible = "ti,omap2-timer"; + reg = <0x49018000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index c38cf76df81f..3705a81c1fc2 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -55,12 +55,6 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator-vsim { - compatible = "ti,twl4030-vsim"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - twl_audio: audio { compatible = "ti,twl4030-audio"; codec { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts new file mode 100644 index 000000000000..f624dc85d441 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f38ea8771b44..1acc26148ffc 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap3430", "ti,omap3"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -60,6 +61,12 @@ ranges; ti,hwmods = "l3_main"; + counter32k: counter@48320000 { + compatible = "ti,omap-counter32k"; + reg = <0x48320000 0x20>; + ti,hwmods = "counter_32k"; + }; + intc: interrupt-controller@48200000 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -240,7 +247,6 @@ <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -255,9 +261,8 @@ <63>, /* RX interrupt */ <4>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <1280>; - ti,hwmods = "mcbsp2"; + ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; mcbsp3: mcbsp@49024000 { @@ -270,9 +275,8 @@ <90>, /* RX interrupt */ <5>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; + ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; mcbsp4: mcbsp@49026000 { @@ -283,7 +287,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -296,9 +299,103 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@48318000 { + compatible = "ti,omap2-timer"; + reg = <0x48318000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@49032000 { + compatible = "ti,omap2-timer"; + reg = <0x49032000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@49034000 { + compatible = "ti,omap2-timer"; + reg = <0x49034000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@49036000 { + compatible = "ti,omap2-timer"; + reg = <0x49036000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@49038000 { + compatible = "ti,omap2-timer"; + reg = <0x49038000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4903a000 { + compatible = "ti,omap2-timer"; + reg = <0x4903a000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4903c000 { + compatible = "ti,omap2-timer"; + reg = <0x4903c000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4903e000 { + compatible = "ti,omap2-timer"; + reg = <0x4903e000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@49040000 { + compatible = "ti,omap2-timer"; + reg = <0x49040000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@48304000 { + compatible = "ti,omap2-timer"; + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12"; + ti,timer-alwon; + ti,timer-secure; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts new file mode 100644 index 000000000000..75466d2abfb5 --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Pandaboard Rev A4+ have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-panda-es.dts index d4ba43a48d9b..73bc1a67e444 100644 --- a/arch/arm/boot/dts/omap4-pandaES.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -22,3 +22,12 @@ "AFML", "Line In", "AFMR", "Line In"; }; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index e8f927cbb376..4122efe31cfd 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -65,6 +65,8 @@ &twl6040_pins &mcpdm_pins &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins >; twl6040_pins: pinmux_twl6040_pins { @@ -92,6 +94,22 @@ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -184,3 +202,7 @@ &dmic { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts new file mode 100644 index 000000000000..b4a40ffbce31 --- /dev/null +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-sdp.dts" + +/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5b7e04fbff50..43e5258a9372 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -124,6 +124,8 @@ &dmic_pins &mcbsp1_pins &mcbsp2_pins + &dss_hdmi_pins + &tpd12s015_pins >; uart2_pins: pinmux_uart2_pins { @@ -194,6 +196,22 @@ 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -406,3 +424,7 @@ &mcbsp3 { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 6601e6af6092..6601e6af6092 100644 --- a/arch/arm/boot/dts/omap4-var_som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3883f94fdbd0..739bb79e410e 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -95,6 +95,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4a304000 { + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap4_pmx_core: pinmux@4a100040 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a100040 0x0196>; @@ -340,7 +346,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -350,7 +355,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -361,7 +365,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -373,7 +376,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -385,7 +387,6 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -396,7 +397,6 @@ reg-names = "mpu"; interrupts = <0 16 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -431,12 +431,103 @@ hw-caps-temp-alert; }; - ocp2scp { + ocp2scp@4a0ad000 { compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "ocp2scp_usb_phy"; }; + + timer1: timer@4a318000 { + compatible = "ti,omap2-timer"; + reg = <0x4a318000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index c663eba73168..8722c15bbba2 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap5.dtsi" +/include/ "samsung_k3pe0e000b.dtsi" / { model = "TI OMAP5 EVM board"; @@ -15,7 +16,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ + reg = <0x80000000 0x80000000>; /* 2 GB */ }; vmmcsd_fixed: fixedregulator-mmcsd { @@ -140,3 +141,13 @@ &mcbsp3 { status = "disabled"; }; + +&emif1 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; + +&emif2 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 42c78beb4fdc..790bb2a4b343 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -77,6 +77,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4ae04000 { + compatible = "ti,omap-counter32k"; + reg = <0x4ae04000 0x40>; + ti,hwmods = "counter_32k"; + }; + omap5_pmx_core: pinmux@4a002840 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; @@ -104,6 +110,8 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; + reg = <0x4ae10000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -113,6 +121,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -122,6 +132,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -131,6 +143,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -140,6 +154,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -149,6 +165,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -158,6 +176,8 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; + reg = <0x48051000 0x200>; + interrupts = <0 35 0x4>; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -167,6 +187,8 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; + reg = <0x48053000 0x200>; + interrupts = <0 121 0x4>; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -176,6 +198,8 @@ i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -183,6 +207,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -190,20 +216,26 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; }; - i2c4: i2c@4807A000 { + i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; + reg = <0x4807a000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; }; - i2c5: i2c@4807C000 { + i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; + reg = <0x4807c000 0x100>; + interrupts = <0 60 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -211,42 +243,56 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; uart5: serial@48066000 { - compatible = "ti,omap5-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48066000 0x100>; + interrupts = <0 105 0x4>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; uart6: serial@48068000 { - compatible = "ti,omap6-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48068000 0x100>; + interrupts = <0 106 0x4>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -254,24 +300,32 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; @@ -287,7 +341,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -297,7 +350,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -308,7 +360,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -320,7 +371,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -332,9 +382,119 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; + + timer1: timer@4ae18000 { + compatible = "ti,omap2-timer"; + reg = <0x4ae18000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + emif1: emif@0x4c000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif1"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4c000000 0x400>; + interrupts = <0 110 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@0x4d000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif2"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4d000000 0x400>; + interrupts = <0 111 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; }; diff --git a/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi new file mode 100644 index 000000000000..9657a5cbc3ad --- /dev/null +++ b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi @@ -0,0 +1,67 @@ +/* + * Timings and Geometry for Samsung K3PE0E000B memory part + */ + +/ { + samsung_K3PE0E000B: lpddr2 { + compatible = "Samsung,K3PE0E000B","jedec,lpddr2-s4"; + density = <4096>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <533333333>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <266666666>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index ff000172c93c..63411b036932 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -37,6 +37,24 @@ regulator-max-microvolt = <3150000>; }; + vusb1v5: regulator-vusb1v5 { + compatible = "ti,twl4030-vusb1v5"; + }; + + vusb1v8: regulator-vusb1v8 { + compatible = "ti,twl4030-vusb1v8"; + }; + + vusb3v1: regulator-vusb3v1 { + compatible = "ti,twl4030-vusb3v1"; + }; + + vsim: regulator-vsim { + compatible = "ti,twl4030-vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + twl_gpio: gpio { compatible = "ti,twl4030-gpio"; gpio-controller; @@ -44,4 +62,13 @@ interrupt-controller; #interrupt-cells = <1>; }; + + twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = <10>, <4>; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; + }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 123e2c40218a..9996cfc5ee80 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -86,4 +86,9 @@ clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; }; diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 66aa7a6db884..394ded624e37 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -139,6 +139,7 @@ CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MC9S08DZ60=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y @@ -155,6 +156,7 @@ CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX3=y CONFIG_FB=y +CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 7bcf850eddcd..3458752c4bb2 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -1,6 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -9,10 +9,12 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MVEBU=y -CONFIG_MACH_ARMADA_370_XP=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_XP=y +# CONFIG_CACHE_L2X0 is not set CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_USE_OF=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -23,6 +25,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index cdd4d2bd3962..2ba9e63d0f17 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -1,3 +1,4 @@ +CONFIG_ARCH_VERSATILE=y CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 59426a4595c9..e847d23351ed 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -8,7 +8,7 @@ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp)) #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) #define flat_get_relocate_addr(rel) (rel) #define flat_set_persistent(relval, p) 0 diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 77bd79f2ffdb..7e1f76027f66 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long); #define USER_DS KERNEL_DS #define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) +#define __addr_ok(addr) ((void)(addr),1) +#define __range_ok(addr,size) ((void)(addr),0) #define get_fs() (KERNEL_DS) static inline void set_fs(mm_segment_t fs) diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index ae05e56dd17d..5000397134b4 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -29,16 +29,22 @@ #ifndef __ASSEMBLY__ /* Explicitly size integers that represent pfns in the interface with - * Xen so that we can have one ABI that works for 32 and 64 bit guests. */ + * Xen so that we can have one ABI that works for 32 and 64 bit guests. + * Note that this means that the xen_pfn_t type may be capable of + * representing pfn's which the guest cannot represent in its own pfn + * type. However since pfn space is controlled by the guest this is + * fine since it simply wouldn't be able to create any sure pfns in + * the first place. + */ typedef uint64_t xen_pfn_t; +#define PRI_xen_pfn "llx" typedef uint64_t xen_ulong_t; +#define PRI_xen_ulong "llx" /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); -__DEFINE_GUEST_HANDLE(ulong, unsigned long); DEFINE_GUEST_HANDLE(char); DEFINE_GUEST_HANDLE(int); -DEFINE_GUEST_HANDLE(long); DEFINE_GUEST_HANDLE(void); DEFINE_GUEST_HANDLE(uint64_t); DEFINE_GUEST_HANDLE(uint32_t); diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 174202318dff..c6b9096cef95 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -10,7 +10,7 @@ #include <xen/interface/grant_table.h> #define pfn_to_mfn(pfn) (pfn) -#define phys_to_machine_mapping_valid (1) +#define phys_to_machine_mapping_valid(pfn) (1) #define mfn_to_pfn(mfn) (mfn) #define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) @@ -30,6 +30,8 @@ typedef struct xpaddr { #define XMADDR(x) ((xmaddr_t) { .maddr = (x) }) #define XPADDR(x) ((xpaddr_t) { .paddr = (x) }) +#define INVALID_P2M_ENTRY (~0UL) + static inline xmaddr_t phys_to_machine(xpaddr_t phys) { unsigned offset = phys.paddr & ~PAGE_MASK; @@ -74,9 +76,14 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte) return 0; } +static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return true; +} + static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) { - BUG(); - return false; + return __set_phys_to_machine(pfn, mfn); } #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S new file mode 100644 index 000000000000..8db01eeabbb4 --- /dev/null +++ b/arch/arm/include/debug/8250_32.S @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2011 Picochip Ltd., Jamie Iles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit + * accesses to the 8250. + */ + +#include <linux/serial_reg.h> + + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + /* The UART's don't have any flow control IO's wired up. */ + .macro waituart,rd,rx + .endm diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S index 7419deb1b948..bc1f07c49cd4 100644 --- a/arch/arm/include/debug/picoxcell.S +++ b/arch/arm/include/debug/picoxcell.S @@ -5,10 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit - * accesses to the 8250. */ -#include <linux/serial_reg.h> #define UART_SHIFT 2 #define PICOXCELL_UART1_BASE 0x80230000 @@ -19,17 +16,4 @@ ldr \rp, =PICOXCELL_UART1_BASE .endm - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - /* The UART's don't have any flow control IO's wired up. */ - .macro waituart,rd,rx - .endm +#include "8250_32.S" diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S index d6f26d23374f..966b2f994946 100644 --- a/arch/arm/include/debug/socfpga.S +++ b/arch/arm/include/debug/socfpga.S @@ -7,6 +7,9 @@ * published by the Free Software Foundation. */ +#define UART_SHIFT 2 +#define DEBUG_LL_UART_OFFSET 0x00002000 + .macro addruart, rp, rv, tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rp, \rp, #0x00c00000 @@ -14,3 +17,5 @@ orr \rp, \rp, #0xff000000 @ physical base .endm +#include "8250_32.S" + diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 16cedb42c0c3..896165096d6a 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -34,6 +34,7 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> +#include <linux/export.h> #include <asm/exception.h> #include <asm/mach/arch.h> @@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) /* Order is clear bits in "clr" then set bits in "set" */ irq_modify_status(irq, clr, set & ~clr); } +EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 38c1a3b103a0..839312905067 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3") TEST_UNSUPPORTED(".word 0xe0500090 @ undef") TEST_UNSUPPORTED(".word 0xe05fff9f @ undef") +#endif +#if __LINUX_ARM_ARCH__ >= 7 TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13") @@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */ #if __LINUX_ARM_ARCH__ >= 6 TEST_UNSUPPORTED("ldrex r2, [sp]") +#endif +#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K) TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]") TEST_UNSUPPORTED("ldrexd r2, r3, [sp]") TEST_UNSUPPORTED("strexb r0, r2, [sp]") diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index e29c3337ca81..8ef8c9337809 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -45,10 +45,9 @@ int machine_kexec_prepare(struct kimage *image) for (i = 0; i < image->nr_segments; i++) { current_segment = &image->segment[i]; - err = memblock_is_region_memory(current_segment->mem, - current_segment->memsz); - if (err) - return - EINVAL; + if (!memblock_is_region_memory(current_segment->mem, + current_segment->memsz)) + return -EINVAL; err = get_user(header, (__be32*)current_segment->buf); if (err) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 93971b1a4f0b..53c0304b734a 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -96,6 +96,10 @@ armpmu_event_set_period(struct perf_event *event, s64 period = hwc->sample_period; int ret = 0; + /* The period may have been changed by PERF_EVENT_IOC_PERIOD */ + if (unlikely(period != hwc->last_period)) + left = period - (hwc->last_period - left); + if (unlikely(left <= -period)) { left = period; local64_set(&hwc->period_left, left); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8e20754dd31d..fbc8b2623d82 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -294,18 +294,24 @@ static void percpu_timer_setup(void); asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + /* + * The identity mapping is uncached (strongly ordered), so + * switch away from it before attempting any exclusive accesses. + */ + cpu_switch_mm(mm->pgd, mm); + enter_lazy_tlb(mm, current); + local_flush_tlb_all(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ + cpu = smp_processor_id(); atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); - cpu_switch_mm(mm->pgd, mm); - enter_lazy_tlb(mm, current); - local_flush_tlb_all(); printk("CPU%u: Booted secondary processor\n", cpu); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index e1f906989bb8..b22d700fea27 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -42,10 +42,10 @@ static void twd_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; - __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); + __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), + twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 9d0a30032d7f..0dc53854a5d8 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val) *timer_val = delay_timer->read_current_timer(); return 0; } +EXPORT_SYMBOL_GPL(read_current_timer); static void __timer_delay(unsigned long cycles) { diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b14207101938..043624219b55 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -21,19 +21,13 @@ config SOC_AT91SAM9 bool select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ menu "Atmel AT91 System-on-Chip" comment "Atmel AT91 Processor" -config SOC_AT91SAM9 - bool - select AT91_SAM9_SMC - select AT91_SAM9_TIME - select CPU_ARM926T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b4f0565aff63..5269825194a8 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a563189cdfc3..1e122bcd7845 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -479,7 +479,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -512,7 +512,7 @@ static struct resource twi_resources[] = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-at91rm9200", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index ad29f93f20ca..f8202615f4a8 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,8 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a76b8684f52d..aa1e58729885 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9260_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -421,7 +421,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 8d999eb1a137..04295c04b3e0 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,8 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9752f17efba9..b9487696b7be 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9261_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -317,7 +317,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6a01d0360dfb..d6f9c23927c4 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8dde220b42b6..cb85da2eccea 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -567,7 +567,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -600,7 +600,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-at91sam9260", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d6ca0543ce8d..5047bdc92adf 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -347,7 +347,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-at91sam9g20", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 6bd7300a2bc5..bb7f54474b92 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -88,6 +88,6 @@ void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS]) if (!priority) priority = at91x40_default_irq_priority; - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); } diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9cda3fd346ae..6960778af4c2 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = { .max_speed_hz = 125000 * 16, .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 27b3af1a3047..a9167dd45f96 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9261_ID_IRQ0, + .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ }, #endif diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 073e17403d98..b87dbe2be0d6 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index f49650677653..b62f560e6c75 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -26,7 +26,8 @@ extern void __init at91_dt_initialize(void); extern void __init at91_init_irq_default(void); extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91_aic_init(unsigned int priority[]); +extern void __init at91_aic_init(unsigned int priority[], + unsigned int ext_irq_mask); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); extern int __init at91_aic5_of_init(struct device_node *node, diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 1e02c0e49dcc..febc2ee901a5 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -502,14 +502,19 @@ int __init at91_aic5_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int *priority) +void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask) { unsigned int i; int irq_base; - if (at91_aic_pm_init()) + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + + if (at91_aic_pm_init() || at91_extern_irq == NULL) panic("Unable to allocate bit maps\n"); + *at91_extern_irq = ext_irq_mask; + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index da9881b161e1..0b32c81730a5 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -47,7 +47,7 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); @@ -151,7 +151,7 @@ static void __init soc_detect(u32 dbgu_base) } /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; at91_boot_soc = at91sam9261_soc; } diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 715b690e5009..1947be8e5f5b 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -47,6 +47,7 @@ #include <plat/fimc-core.h> #include <plat/iic-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -346,6 +347,8 @@ static void __init exynos4_map_io(void) s5p_fb_setname(0, "exynos4-fb"); s5p_hdmi_setname("exynos4-hdmi"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos5_map_io(void) @@ -366,6 +369,8 @@ static void __init exynos5_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e58d786faf78..eadf4b59e7d2 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -99,6 +99,7 @@ static char const *exynos4_dt_compat[] __initdata = { DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = exynos4_dt_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1a7a8dd045a1..1ab91b5209e6 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -108,7 +108,7 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name, busy->div.hw.init = &init; clk = clk_register(NULL, &busy->div.hw); - if (!clk) + if (IS_ERR(clk)) kfree(busy); return clk; diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d20d4795f4ea..01e2f843bf2e 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -127,8 +127,8 @@ int __init mx25_clocks_init(void) clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); - clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7); - clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8); + clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); + clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 3b6b640eed24..366e5d59d886 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -109,7 +109,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6); clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6); clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks)); - clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3); + clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6); clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3); clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); @@ -121,7 +121,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6); - clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3); + clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6); clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0); clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0); clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1); diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9d2c843bde02..b5deb0554552 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,9 +108,8 @@ void __init imx3_init_l2x0(void) } l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); + if (!l2x0_base) { + printk(KERN_ERR "remapping L2 cache area failed\n"); return; } diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index cd169c386161..f0e69cbc5baa 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ + serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index e255164ff087..a8fce3ccc707 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .atag_offset = 0x100, .map_io = ams_delta_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 4b6de70c47a6..e067f221f0f9 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -27,16 +27,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> #include <mach/flash.h> -#include <plat/fpga.h> #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" /* fsample is pretty close to p2-sample */ @@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = { static void __init fsample_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -362,7 +362,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .atag_offset = 0x100, .map_io = omap_fsample_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 4ec579fdd366..608e7d2a2778 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index e1362ce48497..7119ef28e0ad 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -13,12 +13,11 @@ */ #include <linux/gpio.h> #include <linux/platform_device.h> - +#include <linux/platform_data/gpio-omap.h> #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h2.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 376f7f29ef77..9134b646f01b 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -39,8 +39,8 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> #include <mach/flash.h> @@ -50,6 +50,7 @@ #include "common.h" #include "board-h2.h" +#include "dma.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 @@ -458,7 +459,6 @@ MACHINE_START(OMAP_H2, "TI-H2") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h2_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index c74daace8cd6..17d77914d769 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,9 +16,8 @@ #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h3.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ededdb7ef28c..bf213d1d8075 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -41,9 +41,9 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/flash.h> #include <mach/hardware.h> @@ -452,7 +452,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h3_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 87ab2086ef96..356f816c84a6 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -43,7 +43,7 @@ #include <asm/mach/arch.h> #include <mach/omap7xx.h> -#include <plat/mmc.h> +#include "mmc.h" #include <mach/irqs.h> #include <mach/usb.h> @@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald") .atag_offset = 0x100, .map_io = htcherald_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = htcherald_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index db5f7d2976e7..f8033fab0f82 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -33,16 +33,15 @@ #include <mach/mux.h> #include <mach/flash.h> -#include <plat/fpga.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/mmc.h> #include <mach/hardware.h> #include <mach/usb.h> #include "iomap.h" #include "common.h" +#include "mmc.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 @@ -215,7 +214,7 @@ static struct platform_device *innovator1510_devices[] __initdata = { static int innovator_get_pendown_state(void) { - return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); + return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); } static const struct ads7846_platform_data innovator1510_ts_info = { @@ -279,7 +278,7 @@ static struct platform_device *innovator1610_devices[] __initdata = { static void __init innovator_init_smc91x(void) { if (cpu_is_omap1510()) { - fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1, + __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1, OMAP1510_FPGA_RST); udelay(750); } else { @@ -335,10 +334,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { if (power_on) - fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3), OMAP1510_FPGA_POWER); else - fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3), OMAP1510_FPGA_POWER); return 0; @@ -390,14 +389,14 @@ static void __init innovator_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); @@ -437,6 +436,7 @@ static void __init innovator_init(void) */ static void __init innovator_map_io(void) { +#ifdef CONFIG_ARCH_OMAP15XX omap15xx_map_io(); iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); @@ -444,9 +444,10 @@ static void __init innovator_map_io(void) /* Dump the Innovator FPGA rev early - useful info for support. */ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", - fpga_read(OMAP1510_FPGA_REV_HIGH), - fpga_read(OMAP1510_FPGA_REV_LOW), - fpga_read(OMAP1510_FPGA_BOARD_REV)); + __raw_readb(OMAP1510_FPGA_REV_HIGH), + __raw_readb(OMAP1510_FPGA_REV_LOW), + __raw_readb(OMAP1510_FPGA_BOARD_REV)); +#endif } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") @@ -454,7 +455,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .atag_offset = 0x100, .map_io = innovator_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = innovator_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7d5c06d6a52a..3e8ead67e459 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -29,13 +29,13 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/mmc.h> -#include <plat/clock.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" +#include "clock.h" +#include "mmc.h" #define ADS7846_PENDOWN_GPIO 15 @@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 5973945a8741..872ea47cd28a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -48,7 +48,7 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = osk_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 1c578d58923a..584b6fab894b 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -36,8 +36,8 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> -#include <plat/dma.h> +#include <mach/tc.h> +#include <plat-omap/dma-omap.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 @@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 97158095083c..fbc986bfe69e 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -28,16 +28,16 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/platform_data/omap1_bl.h> +#include <linux/platform_data/leds-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/led.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 @@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e311032e7eeb..60d917a93763 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -38,8 +38,8 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -47,6 +47,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 @@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 198b05417bfc..9a7e483ed6fd 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -28,15 +28,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/fpga.h> #include <mach/flash.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), @@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = { static void __init perseus2_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -324,7 +324,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .atag_offset = 0x100, .map_io = omap_perseus2_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 5932d56e17bf..4fcf19c78a08 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -16,9 +16,10 @@ #include <linux/platform_device.h> #include <mach/hardware.h> -#include <plat/mmc.h> #include <mach/board-sx1.h> +#include "mmc.h" + #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static int mmc_set_power(struct device *dev, int slot, int power_on, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 13bf2cc56814..1ebc7e08d6e5 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -36,15 +36,16 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/irda.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/board-sx1.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" +#include "dma.h" /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) @@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index ad75e3411d46..abf705f49b19 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -34,7 +34,7 @@ #include <mach/board-voiceblue.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 638f4070fc70..4f5fd4a084c0 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> @@ -21,21 +22,21 @@ #include <asm/mach-types.h> -#include <plat/cpu.h> -#include <plat/usb.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/clkdev_omap.h> - #include <mach/hardware.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "opp.h" +#include "sram.h" __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + /* * Omap1 specific clock functions */ @@ -607,3 +608,497 @@ void omap1_clk_disable_unused(struct clk *clk) } #endif + + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + pr_err("Trying disable clock %s with 0 usecount\n", + clk->name); + WARN_ON(1); + goto out; + } + + omap1_clk_disable(clk); + +out: + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_get_rate); + +/* + * Optional clock functions defined in include/linux/clk.h + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_set_rate(clk, rate); + if (ret == 0) + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); + + return -EINVAL; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * OMAP specific clock functions shared between omap1 and omap2 + */ + +int __initdata mpurate; + +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) +{ + get_option(&str, &mpurate); + + if (!mpurate) + return 1; + + if (mpurate < 1000) + mpurate *= 1000000; + + return 1; +} +__setup("mpurate=", omap_clk_setup); + +/* Used for clocks that always have same value as the parent clock */ +unsigned long followparent_recalc(struct clk *clk) +{ + return clk->parent->rate; +} + +/* + * Used for clocks that have the same value as the parent clock, + * divided by some factor + */ +unsigned long omap_fixed_divisor_recalc(struct clk *clk) +{ + WARN_ON(!clk->fixed_div); + + return clk->parent->rate / clk->fixed_div; +} + +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ +} + +/* Propagate rate to children */ +void propagate_rate(struct clk *tclk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &tclk->children, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +static LIST_HEAD(root_clks); + +/** + * recalculate_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + * Called at init. + */ +void recalculate_root_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +/** + * clk_preinit - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ +void clk_preinit(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + + mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + + list_add(&clk->node, &clocks); + if (clk->init) + clk->init(clk); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->sibling); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +void clk_enable_init_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) + if (clkp->flags & ENABLE_ON_INIT) + clk_enable(clkp); +} + +/** + * omap_clk_get_by_name - locate OMAP struct clk by its name + * @name: name of the struct clk to locate + * + * Locate an OMAP struct clk by its name. Assumes that struct clk + * names are unique. Returns NULL if not found or a pointer to the + * struct clk if found. + */ +struct clk *omap_clk_get_by_name(const char *name) +{ + struct clk *c; + struct clk *ret = NULL; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(c, &clocks, node) { + if (!strcmp(c->name, name)) { + ret = c; + break; + } + } + + mutex_unlock(&clocks_mutex); + + return ret; +} + +int omap_clk_enable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->allow_idle) + c->ops->allow_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +int omap_clk_disable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->deny_idle) + c->ops->deny_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + +/* + * Dummy clock + * + * Used for clock aliases that are needed on some OMAPs, but not others + */ +struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_null, +}; + +/* + * + */ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); + list_for_each_entry(ck, &clocks, node) { + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || !ck->enable_reg) + continue; + + omap1_clk_disable_unused(ck); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +late_initcall(clk_disable_unused); +late_initcall(omap_clk_enable_autoidle_all); +#endif + +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) +/* + * debugfs support to trace clock tree hierarchy and attributes + */ + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static struct dentry *clk_debugfs_root; + +static int clk_dbg_show_summary(struct seq_file *s, void *unused) +{ + struct clk *c; + struct clk *pa; + + mutex_lock(&clocks_mutex); + seq_printf(s, "%-30s %-30s %-10s %s\n", + "clock-name", "parent-name", "rate", "use-count"); + + list_for_each_entry(c, &clocks, node) { + pa = c->parent; + seq_printf(s, "%-30s %-30s %-10lu %d\n", + c->name, pa ? pa->name : "none", c->rate, + c->usecount); + } + mutex_unlock(&clocks_mutex); + + return 0; +} + +static int clk_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_dbg_show_summary, inode->i_private); +} + +static const struct file_operations debug_clock_fops = { + .open = clk_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int clk_debugfs_register_one(struct clk *c) +{ + int err; + struct dentry *d; + struct clk *pa = c->parent; + + d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); + if (!d) + return -ENOMEM; + c->dent = d; + + d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); + if (!d) { + err = -ENOMEM; + goto err_out; + } + return 0; + +err_out: + debugfs_remove_recursive(c->dent); + return err; +} + +static int clk_debugfs_register(struct clk *c) +{ + int err; + struct clk *pa = c->parent; + + if (pa && !pa->dent) { + err = clk_debugfs_register(pa); + if (err) + return err; + } + + if (!c->dent) { + err = clk_debugfs_register_one(c); + if (err) + return err; + } + return 0; +} + +static int __init clk_debugfs_init(void) +{ + struct clk *c; + struct dentry *d; + int err; + + d = debugfs_create_dir("clock", NULL); + if (!d) + return -ENOMEM; + clk_debugfs_root = d; + + list_for_each_entry(c, &clocks, node) { + err = clk_debugfs_register(c); + if (err) + goto err_out; + } + + d = debugfs_create_file("summary", S_IRUGO, + d, NULL, &debug_clock_fops); + if (!d) + return -ENOMEM; + + return 0; +err_out: + debugfs_remove_recursive(clk_debugfs_root); + return err; +} +late_initcall(clk_debugfs_init); + +#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 3d04f4f67676..1e4918a3a5ee 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -14,8 +14,184 @@ #define __ARCH_ARM_MACH_OMAP1_CLOCK_H #include <linux/clk.h> +#include <linux/list.h> -#include <plat/clock.h> +#include <linux/clkdev.h> + +struct module; +struct clk; + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +/* Platform flags for the clkdev-OMAP integration code */ +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) /* 7xx, 850 */ +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ +#define CK_1710 (1 << 4) /* 1710 extra for rate selection */ + + +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; + u8 rate_offset; + u8 src_offset; +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +}; + +extern int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; int omap1_clk_init(void); void omap1_clk_late_init(void); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 9b45f4b0ee22..cb7c6ae2e3fc 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -22,16 +22,14 @@ #include <asm/mach-types.h> /* for machine_is_* */ -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/clkdev_omap.h> -#include <plat/sram.h> /* for omap_sram_reprogram_clock() */ +#include "soc.h" #include <mach/hardware.h> #include <mach/usb.h> /* for OTG_BASE */ #include "iomap.h" #include "clock.h" +#include "sram.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ #define IDL_CLKOUT_ARM_SHIFT 12 @@ -765,14 +763,6 @@ static struct omap_clk omap_clks[] = { * init */ -static struct clk_functions omap1_clk_functions = { - .clk_enable = omap1_clk_enable, - .clk_disable = omap1_clk_disable, - .clk_round_rate = omap1_clk_round_rate, - .clk_set_rate = omap1_clk_set_rate, - .clk_disable_unused = omap1_clk_disable_unused, -}; - static void __init omap1_show_rates(void) { pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", @@ -803,8 +793,6 @@ int __init omap1_clk_init(void) if (!cpu_is_omap15xx()) omap_writew(0, SOFT_REQ_REG2); - clk_init(&omap1_clk_functions); - /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index c2552b24f9f2..fc8c9449eba8 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -26,8 +26,10 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include <plat/common.h> #include <linux/mtd/mtd.h> +#include <linux/i2c-omap.h> + +#include <plat/i2c.h> #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); @@ -38,6 +40,7 @@ static inline void omap7xx_map_io(void) #endif #ifdef CONFIG_ARCH_OMAP15XX +void omap1510_fpga_init_irq(void); void omap15xx_map_io(void); #else static inline void omap15xx_map_io(void) diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index d3fec92c54cb..7155ed8b97f8 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -19,10 +19,8 @@ #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/mmc.h> #include <mach/omap7xx.h> #include <mach/camera.h> @@ -30,6 +28,9 @@ #include "common.h" #include "clock.h" +#include "dma.h" +#include "mmc.h" +#include "sram.h" #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) @@ -175,6 +176,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base, res[3].name = "tx"; res[3].flags = IORESOURCE_DMA; + if (cpu_is_omap7xx()) + data->slots[0].features = MMC_OMAP7XX; + if (cpu_is_omap15xx()) + data->slots[0].features = MMC_OMAP15XX; + if (cpu_is_omap16xx()) + data->slots[0].features = MMC_OMAP16XX; + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret == 0) ret = platform_device_add_data(pdev, data, sizeof(*data)); diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 29007fef84cd..978aed85d328 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,11 +25,13 @@ #include <linux/device.h> #include <linux/io.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irqs.h> +#include "dma.h" + #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 #define OMAP1_DMA_STRIDE 0x40 @@ -319,6 +321,9 @@ static int __init omap1_system_dma_init(void) d->dev_caps = ENABLE_1510_MODE; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; + if (cpu_is_omap16xx()) + d->dev_caps = ENABLE_16XX_MODE; + d->dev_caps |= SRC_PORT; d->dev_caps |= DST_PORT; d->dev_caps |= SRC_INDEX; diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h new file mode 100644 index 000000000000..da6345dab03f --- /dev/null +++ b/arch/arm/mach-omap1/dma.h @@ -0,0 +1,83 @@ +/* + * OMAP1 DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP1_DMA_CHANNEL_H +#define __OMAP1_DMA_CHANNEL_H + +/* DMA channels for omap1 */ +#define OMAP_DMA_NO_DEVICE 0 +#define OMAP_DMA_MCSI1_TX 1 +#define OMAP_DMA_MCSI1_RX 2 +#define OMAP_DMA_I2C_RX 3 +#define OMAP_DMA_I2C_TX 4 +#define OMAP_DMA_EXT_NDMA_REQ 5 +#define OMAP_DMA_EXT_NDMA_REQ2 6 +#define OMAP_DMA_UWIRE_TX 7 +#define OMAP_DMA_MCBSP1_TX 8 +#define OMAP_DMA_MCBSP1_RX 9 +#define OMAP_DMA_MCBSP3_TX 10 +#define OMAP_DMA_MCBSP3_RX 11 +#define OMAP_DMA_UART1_TX 12 +#define OMAP_DMA_UART1_RX 13 +#define OMAP_DMA_UART2_TX 14 +#define OMAP_DMA_UART2_RX 15 +#define OMAP_DMA_MCBSP2_TX 16 +#define OMAP_DMA_MCBSP2_RX 17 +#define OMAP_DMA_UART3_TX 18 +#define OMAP_DMA_UART3_RX 19 +#define OMAP_DMA_CAMERA_IF_RX 20 +#define OMAP_DMA_MMC_TX 21 +#define OMAP_DMA_MMC_RX 22 +#define OMAP_DMA_NAND 23 +#define OMAP_DMA_IRQ_LCD_LINE 24 +#define OMAP_DMA_MEMORY_STICK 25 +#define OMAP_DMA_USB_W2FC_RX0 26 +#define OMAP_DMA_USB_W2FC_RX1 27 +#define OMAP_DMA_USB_W2FC_RX2 28 +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_TX1 30 +#define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +#define OMAP_DMA_CRYPTO_DES_IN 32 +#define OMAP_DMA_SPI_TX 33 +#define OMAP_DMA_SPI_RX 34 +#define OMAP_DMA_CRYPTO_HASH 35 +#define OMAP_DMA_CCP_ATTN 36 +#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +#define OMAP_DMA_MMC2_TX 54 +#define OMAP_DMA_MMC2_RX 55 +#define OMAP_DMA_CRYPTO_DES_OUT 56 + +#endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 73ae6169aa4a..b3fb531af94e 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -10,7 +10,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/flash.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 29ec50fc688d..8bd71b2d0967 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -27,11 +27,11 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <plat/fpga.h> - #include <mach/hardware.h> #include "iomap.h" +#include "common.h" +#include "fpga.h" static void fpga_mask_irq(struct irq_data *d) { diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h new file mode 100644 index 000000000000..4b4307a80e48 --- /dev/null +++ b/arch/arm/mach-omap1/fpga.h @@ -0,0 +1,52 @@ +/* + * Interrupt handler for OMAP-1510 FPGA + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FPGA_H +#define __ASM_ARCH_OMAP_FPGA_H + +/* + * --------------------------------------------------------------------------- + * H2/P2 Debug board FPGA + * --------------------------------------------------------------------------- + */ +/* maps in the FPGA registers and the ETHR registers */ +#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ + +#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) +#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ + +/* LEDs definition on debug board (16 LEDs, all physically green) */ +#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) +#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) +#define H2P2_DBG_FPGA_LED_RED (1 << 13) +#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) +/* cpu0 load-meter LEDs */ +#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... +#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 +#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) + +#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) +#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) + +#endif diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 98e6f39224a4..02b3eb2e201c 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 33f419236b17..b9952a258d82 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 #define OMAP1610_GPIO3_BASE 0xfffbb400 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 958ce9acee95..f5819b2b7cbe 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 #define OMAP7XX_GPIO3_BASE 0xfffbd000 diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index a0551a6d7451..faca808cb3d9 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -19,11 +19,25 @@ * */ -#include <plat/i2c.h> +#include <linux/i2c-omap.h> #include <mach/mux.h> -#include <plat/cpu.h> +#include "soc.h" + +#include <plat/i2c.h> + +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP1_INT_I2C (32 + 4) + +static const char name[] = "omap_i2c"; -void __init omap1_i2c_mux_pins(int bus_id) +static struct resource i2c_resources[2] = { +}; + +static struct platform_device omap_i2c_devices[1] = { +}; + +static void __init omap1_i2c_mux_pins(int bus_id) { if (cpu_is_omap7xx()) { omap_cfg_reg(I2C_7XX_SDA); @@ -33,3 +47,47 @@ void __init omap1_i2c_mux_pins(int bus_id) omap_cfg_reg(I2C_SCL); } } + +int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, + int bus_id) +{ + struct platform_device *pdev; + struct resource *res; + + if (bus_id > 1) + return -EINVAL; + + omap1_i2c_mux_pins(bus_id); + + pdev = &omap_i2c_devices[bus_id - 1]; + pdev->id = bus_id; + pdev->name = name; + pdev->num_resources = ARRAY_SIZE(i2c_resources); + res = i2c_resources; + res[0].start = OMAP1_I2C_BASE; + res[0].end = res[0].start + OMAP_I2C_SIZE; + res[0].flags = IORESOURCE_MEM; + res[1].start = OMAP1_INT_I2C; + res[1].flags = IORESOURCE_IRQ; + pdev->resource = res; + + /* all OMAP1 have IP version 1 register set */ + pdata->rev = OMAP_I2C_IP_VERSION_1; + + /* all OMAP1 I2C are implemented like this */ + pdata->flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; + + /* how the cpu bus is wired up differs for 7xx only */ + + if (cpu_is_omap7xx()) + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; + else + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; + + pdev->dev.platform_data = pdata; + + return platform_device_register(pdev); +} diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index a1b846aacdaf..52de382fc804 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <asm/system_info.h> -#include <plat/cpu.h> +#include "soc.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 2b36a281dc84..5c1a26c9f490 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <plat/serial.h> +#include "serial.h" .pushsection .data omap_uart_phys: .word 0x0 diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index 88f08cab1717..78a8c6c24764 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -13,8 +13,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include "../../iomap.h" - .macro get_irqnr_preamble, base, tmp .endm diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h deleted file mode 100644 index ebf86c0f4f46..000000000000 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 84248d250adb..5875a5098d35 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -39,7 +39,7 @@ #include <asm/sizes.h> #ifndef __ASSEMBLER__ #include <asm/types.h> -#include <plat/cpu.h> +#include <mach/soc.h> /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these @@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa); extern void omap_writew(u16 v, u32 pa); extern void omap_writel(u32 v, u32 pa); -#include <plat/tc.h> +#include <mach/tc.h> /* Almost all documentation for chip and board memory maps assumes * BM is clear. Most devel boards have a switch to control booting @@ -72,7 +72,10 @@ static inline u32 omap_cs3_phys(void) #endif /* ifndef __ASSEMBLER__ */ -#include <plat/serial.h> +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +#include <mach/serial.h> /* * --------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index 901082def9bd..3c2530523111 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -19,7 +19,7 @@ * because of the strncmp(). */ #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) -#include <plat/cpu.h> +#include <mach/soc.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h index 8fe05d6137c0..3d235244bf5c 100644 --- a/arch/arm/mach-omap1/include/mach/omap1510.h +++ b/arch/arm/mach-omap1/include/mach/omap1510.h @@ -45,5 +45,118 @@ #define OMAP1510_DSP_MMU_BASE (0xfffed200) +/* + * --------------------------------------------------------------------------- + * OMAP-1510 FPGA + * --------------------------------------------------------------------------- + */ +#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* PA */ + +/* Revision */ +#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) +#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) +#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) +#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) +#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) +#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) + +/* Interrupt status */ +#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) +#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) + +/* Interrupt mask */ +#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) +#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) + +/* Reset registers */ +#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) +#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) + +#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) +#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) +#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) +#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) +#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) +#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) +#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) +#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) +#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) +#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) +#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) + +#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) + +#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) +#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) +#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) +#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) +#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) +#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) +#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) +#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) +#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) +#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) + +#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) + +/* + * Power up Giga UART driver, turn on HID clock. + * Turn off BT power, since we're not using it and it + * draws power. + */ +#define OMAP1510_FPGA_RESET_VALUE 0x42 + +#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) +#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) +#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) +#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) +#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) +#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) +#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) +#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) + +/* + * Innovator/OMAP1510 FPGA HID register bit definitions + */ +#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ +#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ +#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ +#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ +#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ +#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ +#define OMAP1510_FPGA_HID_rsrvd (1<<6) +#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ + +/* The FPGA IRQ is cascaded through GPIO_13 */ +#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) + +/* IRQ Numbers for interrupts muxed through the FPGA */ +#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) +#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) +#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) +#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) +#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) +#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) +#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) +#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) +#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) +#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) +#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) +#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) +#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) +#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) +#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) +#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) +#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) +#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) +#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) +#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) +#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) +#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) +#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) +#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) + #endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h new file mode 100644 index 000000000000..2ce6a2db470b --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/serial.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SERIAL_H +#define __ASM_ARCH_SERIAL_H + +#include <linux/init.h> + +/* + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO_OFS 0x3ffc + +/* OMAP1 serial ports */ +#define OMAP1_UART1_BASE 0xfffb0000 +#define OMAP1_UART2_BASE 0xfffb0800 +#define OMAP1_UART3_BASE 0xfffb9800 + +#define OMAP_PORT_SHIFT 2 +#define OMAP7XX_PORT_SHIFT 0 + +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) + +/* + * DEBUG_LL port encoding stored into the UART1 scratchpad register by + * decomp_setup in uncompress.h + */ +#define OMAP1UART1 11 +#define OMAP1UART2 12 +#define OMAP1UART3 13 + +#ifndef __ASSEMBLER__ +extern void omap_serial_init(void); +#endif + +#endif diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h new file mode 100644 index 000000000000..6cf9c1cc2bef --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -0,0 +1,229 @@ +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap310(): True for OMAP310 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) + +#define cpu_is_omap310() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 + +/* These are needed to compile common code */ +#ifdef CONFIG_ARCH_OMAP1 +#define cpu_is_omap242x() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap24xx() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap44xx() 0 +#define soc_is_omap54xx() 0 +#define soc_is_am33xx() 0 +#define cpu_class_is_omap1() 1 +#define cpu_class_is_omap2() 0 +#endif + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 310 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/mach-omap1/include/mach/tc.h index 1b4b2da86203..1b4b2da86203 100644 --- a/arch/arm/plat-omap/include/plat/tc.h +++ b/arch/arm/mach-omap1/include/mach/tc.h diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index 0ff22dc075c7..ad6fbe7d83f2 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -1,5 +1,122 @@ /* - * arch/arm/mach-omap1/include/mach/uncompress.h + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ -#include <plat/uncompress.h> +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/memory.h> +#include <asm/mach-types.h> + +#include "serial.h" + +#define MDR1_MODE_MASK 0x07 + +volatile u8 *uart_base; +int uart_shift; + +/* + * Store the DEBUG_LL uart number into memory. + * See also debug-macro.S, and serial.c for related code. + */ +static void set_omap_uart_info(unsigned char port) +{ + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; +} + +static void putc(int c) +{ + if (!uart_base) + return; + + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) + barrier(); + uart_base[UART_TX << uart_shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * Macros to configure UART1 and debug UART + */ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ + if (machine_is_##mach()) { \ + uart_base = (volatile u8 *)(dbg_uart); \ + uart_shift = (dbg_shft); \ + port = (dbg_id); \ + set_omap_uart_info(port); \ + break; \ + } + +#define DEBUG_LL_OMAP7XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ + OMAP1UART##p) + +#define DEBUG_LL_OMAP1(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP1UART##p) + +static inline void arch_decomp_setup(void) +{ + int port = 0; + + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* omap7xx/8xx based boards using UART1 with shift 0 */ + DEBUG_LL_OMAP7XX(1, herald); + DEBUG_LL_OMAP7XX(1, omap_perseus2); + + /* omap15xx/16xx based boards using UART1 */ + DEBUG_LL_OMAP1(1, ams_delta); + DEBUG_LL_OMAP1(1, nokia770); + DEBUG_LL_OMAP1(1, omap_h2); + DEBUG_LL_OMAP1(1, omap_h3); + DEBUG_LL_OMAP1(1, omap_innovator); + DEBUG_LL_OMAP1(1, omap_osk); + DEBUG_LL_OMAP1(1, omap_palmte); + DEBUG_LL_OMAP1(1, omap_palmz71); + + /* omap15xx/16xx based boards using UART2 */ + DEBUG_LL_OMAP1(2, omap_palmtt); + + /* omap15xx/16xx based boards using UART3 */ + DEBUG_LL_OMAP1(3, sx1); + } while (0); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 6a5baab1f4cb..5a3b80617a11 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -17,8 +17,8 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/tc.h> -#include <plat/dma.h> +#include <mach/tc.h> +#include <plat-omap/dma-omap.h> #include "iomap.h" #include "common.h" @@ -134,7 +134,6 @@ void __init omap1_init_early(void) */ omap1_clk_init(); omap1_mux_init(); - omap_init_consistent_dma_size(); } void __init omap1_init_late(void) diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h index 330c4716b028..f4e2d7a21365 100644 --- a/arch/arm/mach-omap1/iomap.h +++ b/arch/arm/mach-omap1/iomap.h @@ -22,9 +22,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - /* * ---------------------------------------------------------------------------- * Omap1 specific IO mapping diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 6995fb6a3345..122ef67939a2 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -45,7 +45,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <plat/cpu.h> +#include "soc.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index ed42628611bc..7ed8c1857d56 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,11 +27,13 @@ #include <linux/interrupt.h> #include <linux/io.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/hardware.h> #include <mach/lcdc.h> +#include "dma.h" + int omap_lcd_dma_running(void) { /* diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index bdc2e7541adb..c6d8fdf92e9c 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,14 +19,15 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/mux.h> -#include <plat/cpu.h> +#include "soc.h" #include <linux/platform_data/asoc-ti-mcbsp.h> #include <mach/irqs.h> #include "iomap.h" +#include "dma.h" #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h new file mode 100644 index 000000000000..39c2b13de884 --- /dev/null +++ b/arch/arm/mach-omap1/mmc.h @@ -0,0 +1,18 @@ +#include <linux/mmc/host.h> +#include <linux/platform_data/mmc-omap.h> + +#define OMAP15XX_NR_MMC 1 +#define OMAP16XX_NR_MMC 2 +#define OMAP1_MMC_SIZE 0x080 +#define OMAP1_MMC1_BASE 0xfffb7800 +#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +#else +static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +#endif diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c index 9cd4ddb51397..8dcebe6d8882 100644 --- a/arch/arm/mach-omap1/opp_data.c +++ b/arch/arm/mach-omap1/opp_data.c @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ -#include <plat/clkdev_omap.h> +#include "clock.h" #include "opp.h" /*------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 47ec16155483..66d663a6ef3a 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -44,23 +44,23 @@ #include <linux/io.h> #include <linux/atomic.h> +#include <asm/fncpy.h> #include <asm/system_misc.h> #include <asm/irq.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> #include <mach/irqs.h> #include "iomap.h" +#include "clock.h" #include "pm.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 7868e75ad077..3f2d39672393 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -19,8 +19,7 @@ #include <linux/clk.h> #include <linux/err.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "soc.h" #ifdef CONFIG_PM_RUNTIME static int omap1_pm_runtime_suspend(struct device *dev) diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index b9d6834af835..d1ac08016f0b 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -23,7 +23,6 @@ #include <asm/mach-types.h> #include <mach/mux.h> -#include <plat/fpga.h> #include "pm.h" diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 0e628743bd03..a908c51839a4 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -36,6 +36,8 @@ #include <asm/assembler.h> +#include <mach/hardware.h> + #include "iomap.h" #include "pm.h" diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h new file mode 100644 index 000000000000..69daf0187b1d --- /dev/null +++ b/arch/arm/mach-omap1/soc.h @@ -0,0 +1,4 @@ +/* + * We can move mach/soc.h here once the drivers are fixed + */ +#include <mach/soc.h> diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c new file mode 100644 index 000000000000..6431b0f862ce --- /dev/null +++ b/arch/arm/mach-omap1/sram-init.c @@ -0,0 +1,76 @@ +/* + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "sram.h" + +#define OMAP1_SRAM_PA 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_and_map_sram(void) +{ + unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ; + unsigned long omap_sram_start = OMAP1_SRAM_PA; + unsigned long omap_sram_size; + + if (cpu_is_omap7xx()) + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ + else if (cpu_is_omap1610() || cpu_is_omap1611() || + cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; /* 16K */ + else { + pr_err("Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, 1); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; + _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap_sram_init(void) +{ + omap_detect_and_map_sram(); + _omap_sram_reprogram_clock = + omap_sram_push(omap1_sram_reprogram_clock, + omap1_sram_reprogram_clock_sz); + + return 0; +} diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h new file mode 100644 index 000000000000..d5a6c8362301 --- /dev/null +++ b/arch/arm/mach-omap1/sram.h @@ -0,0 +1,7 @@ +#include <plat/sram.h> + +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 74529549130c..89368195bf08 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -50,6 +50,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include <plat/counter-32k.h> #include <plat/dmtimer.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 84267edd9421..104fed366b8f 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -301,7 +301,7 @@ static inline void otg_device_init(struct omap_usb_config *pdata) #endif -u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -409,7 +409,7 @@ u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) return syscon1 << 16; } -u32 __init omap1_usb1_init(unsigned nwires) +static u32 __init omap1_usb1_init(unsigned nwires) { u32 syscon1 = 0; @@ -475,7 +475,7 @@ bad: return syscon1 << 20; } -u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) { u32 syscon1 = 0; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2a1a898c7f90..d669e227e00c 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,7 +11,6 @@ config ARCH_OMAP2PLUS_TYPICAL select I2C_OMAP select MENELAUS if ARCH_OMAP2 select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 - select PINCTRL select PM_RUNTIME select REGULATOR select SERIAL_OMAP diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fe40d9e488c9..b118ed5f61a9 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,8 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ + omap_device.o sram.o # INTCPS IP block support - XXX should be moved to drivers/ obj-$(CONFIG_ARCH_OMAP2) += irq.o @@ -69,6 +70,7 @@ obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index d0c54c573d34..af11dcdb7e2c 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -18,7 +18,7 @@ #include <linux/err.h> #include <linux/davinci_emac.h> #include <asm/system.h> -#include <plat/omap_device.h> +#include "omap_device.h" #include "am35xx.h" #include "control.h" #include "am35xx-emac.h" diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 95b384d54f8a..d1c01625fe5a 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -28,14 +28,12 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> -#include <plat/usb.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include <video/omapdss.h> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 96cd3693e1ae..79fd9048fd79 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -30,15 +30,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> +#include <plat-omap/dma-omap.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> +#include "gpmc.h" #include "gpmc-smc91x.h" +#include "soc.h" #include "board-flash.h" #include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index fc224ad86747..81871b1c735c 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -18,9 +18,8 @@ #include "common.h" #include "gpmc-smc91x.h" -#include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 3669c120c7e8..fd80d976872d 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -27,6 +27,7 @@ #include <linux/leds.h> #include <linux/leds_pwm.h> #include <linux/platform_data/omap4-keypad.h> +#include <linux/usb/musb.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> @@ -34,8 +35,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> -#include <plat/mmc.h> #include "omap4-keypad.h" #include <video/omapdss.h> #include <video/omap-panel-nokia-dsi.h> @@ -45,6 +44,7 @@ #include "soc.h" #include "mux.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 318feadb1d6e..603503c587b7 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include "am35xx-emac.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index e16289755f2e..96d6c5ab5d4c 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -25,6 +25,7 @@ #include <linux/can/platform/ti_hecc.h> #include <linux/davinci_emac.h> #include <linux/mmc/host.h> +#include <linux/usb/musb.h> #include <linux/platform_data/gpio-omap.h> #include "am35xx.h" @@ -33,7 +34,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index cea3abace815..64cf1bde0f3b 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -28,14 +28,14 @@ #include <linux/clk.h> #include <linux/smc91x.h> #include <linux/gpio.h> +#include <linux/platform_data/leds-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <plat/led.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 376d26eb601c..a8cad2237a2a 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -38,21 +38,19 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/hardware.h> - +#include "common.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-nand.h" #define CM_T35_GPIO_PENDOWN 57 #define SB_T35_USB_HUB_RESET_GPIO 167 @@ -181,7 +179,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = { static void __init cm_t35_init_nand(void) { - if (gpmc_nand_init(&cm_t35_nand_data) < 0) + if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0) pr_err("CM-T35: Unable to register NAND device\n"); } #else diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 59c0a45f75b0..278664731d2c 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -39,9 +39,8 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "am35xx.h" @@ -49,6 +48,7 @@ #include "control.h" #include "common-board-devices.h" #include "am35xx-emac.h" +#include "gpmc-nand.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -240,7 +240,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = { static void __init cm_t3517_init_nand(void) { - if (gpmc_nand_init(&cm_t3517_nand_data) < 0) + if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0) pr_err("CM-T3517: NAND initialization failed\n"); } #else diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1fd161e934c7..933479e36737 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -39,9 +39,8 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> @@ -55,8 +54,11 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 @@ -621,8 +623,9 @@ static void __init devkit8000_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, - ARRAY_SIZE(devkit8000_nand_partitions)); + board_nand_init(devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e642acf9cad0..c33adea0247c 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -17,14 +17,14 @@ #include <linux/mtd/physmap.h> #include <linux/io.h> -#include <plat/cpu.h> -#include <plat/gpmc.h> #include <linux/platform_data/mtd-nand-omap2.h> #include <linux/platform_data/mtd-onenand-omap2.h> -#include <plat/tc.h> +#include "soc.h" #include "common.h" #include "board-flash.h" +#include "gpmc-onenand.h" +#include "gpmc-nand.h" #define REG_FPGA_REV 0x10 #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 @@ -104,36 +104,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, defined(CONFIG_MTD_NAND_OMAP2_MODULE) /* Note that all values in this struct are in nanoseconds */ -static struct gpmc_timings nand_timings = { +struct gpmc_timings nand_default_timings[1] = { + { + .sync_clk = 0, - .sync_clk = 0, + .cs_on = 0, + .cs_rd_off = 36, + .cs_wr_off = 36, - .cs_on = 0, - .cs_rd_off = 36, - .cs_wr_off = 36, + .adv_on = 6, + .adv_rd_off = 24, + .adv_wr_off = 36, - .adv_on = 6, - .adv_rd_off = 24, - .adv_wr_off = 36, + .we_off = 30, + .oe_off = 48, - .we_off = 30, - .oe_off = 48, + .access = 54, + .rd_cycle = 72, + .wr_cycle = 72, - .access = 54, - .rd_cycle = 72, - .wr_cycle = 72, - - .wr_access = 30, - .wr_data_mux_bus = 0, + .wr_access = 30, + .wr_data_mux_bus = 0, + }, }; -static struct omap_nand_platform_data board_nand_data = { - .gpmc_t = &nand_timings, -}; +static struct omap_nand_platform_data board_nand_data; void -__init board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) +__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, + int nand_type, struct gpmc_timings *gpmc_t) { board_nand_data.cs = cs; board_nand_data.parts = nand_parts; @@ -141,7 +140,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.devsize = nand_type; board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; - gpmc_nand_init(&board_nand_data); + gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ @@ -238,5 +237,6 @@ void __init board_flash_init(struct flash_partitions partition_info[], pr_err("NAND: Unable to find configuration in GPMC\n"); else board_nand_init(partition_info[2].parts, - partition_info[2].nr_parts, nandcs, nand_type); + partition_info[2].nr_parts, nandcs, + nand_type, nand_default_timings); } diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index c44b70d52021..2fb5d41a9fae 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -12,7 +12,7 @@ */ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <plat/gpmc.h> +#include "gpmc.h" #define PDC_NOR 1 #define PDC_NAND 2 @@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[], #if defined(CONFIG_MTD_NAND_OMAP2) || \ defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type); + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t); +extern struct gpmc_timings nand_default_timings[]; #else static inline void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t) { } +#define nand_default_timings NULL #endif #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 601ecdfb1cf9..d69018028d96 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -97,6 +97,23 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .dt_compat = omap3_boards_compat, .restart = omap_prcm_restart, MACHINE_END + +static const char *omap3_gp_boards_compat[] __initdata = { + "ti,omap3-beagle", + NULL, +}; + +DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap3_secure_timer, + .dt_compat = omap3_gp_boards_compat, + .restart = omap_prcm_restart, +MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 8d04bf851af4..8668c72ee810 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -26,15 +26,14 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/input/matrix_keypad.h> +#include <linux/mfd/menelaus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/menelaus.h> -#include <plat/dma.h> -#include <plat/gpmc.h> -#include "debug-devices.h" +#include <plat-omap/dma-omap.h> +#include <plat/debug-devices.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -42,6 +41,7 @@ #include "common.h" #include "mux.h" #include "control.h" +#include "gpmc.h" #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 48d5e41dfbfa..dbc705ac4334 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -29,20 +29,19 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include "common.h" -#include <plat/gpmc.h> -#include <plat/usb.h> - #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include "common.h" +#include "gpmc.h" #include "mux.h" #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" #include "common-board-devices.h" #include "board-flash.h" #include "control.h" +#include "gpmc-onenand.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -175,7 +174,7 @@ static void __init igep_flash_init(void) pr_info("IGEP: initializing NAND memory device\n"); board_nand_init(igep_flash_partitions, ARRAY_SIZE(igep_flash_partitions), - 0, NAND_BUSWIDTH_16); + 0, NAND_BUSWIDTH_16, nand_default_timings); } else if (mux == IGEP_SYSBOOT_ONENAND) { pr_info("IGEP: initializing OneNAND memory device\n"); board_onenand_init(igep_flash_partitions, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ee8c3cfb95b3..1164b1061038 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -35,9 +35,8 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> -#include <mach/board-zoom.h> -#include <plat/usb.h> +#include "board-zoom.h" +#include "gpmc.h" #include "gpmc-smsc911x.h" #include <video/omapdss.h> @@ -420,8 +419,8 @@ static void __init omap_ldp_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); usb_musb_init(NULL); - board_nand_init(ldp_nand_partitions, - ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); + board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), + ZOOM_NAND_CS, 0, nand_default_timings); omap_hsmmc_init(mmc); ldp_display_init(); diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index d95f727ca39a..e3efcb88cb3b 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -22,16 +22,17 @@ #include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/mfd/menelaus.h> #include <sound/tlv320aic3x.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include "common.h" -#include <plat/menelaus.h> -#include <plat/mmc.h> +#include "mmc.h" #include "mux.h" +#include "gpmc-onenand.h" #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431c745a..5a3800da903f 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -24,6 +24,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/opp.h> +#include <linux/cpu.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -38,19 +39,22 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> -#include <plat/omap_device.h> +#include "common.h" +#include "omap_device.h" +#include "gpmc.h" +#include "soc.h" #include "mux.h" #include "hsmmc.h" #include "pm.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -444,27 +448,31 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init beagle_opp_init(void) +static int __init beagle_opp_init(void) { int r = 0; - /* Initialize the omap3 opp table */ - if (omap3_opp_init()) { + if (!machine_is_omap3_beagle()) + return 0; + + /* Initialize the omap3 opp table if not already created. */ + r = omap3_opp_init(); + if (IS_ERR_VALUE(r) && (r != -EEXIST)) { pr_err("%s: opp default init failed\n", __func__); - return; + return r; } /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { struct device *mpu_dev, *iva_dev; - mpu_dev = omap_device_get_by_hwmod_name("mpu"); + mpu_dev = get_cpu_device(0); iva_dev = omap_device_get_by_hwmod_name("iva"); if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); - return; + return -ENODEV; } /* Enable MPU 1GHz and lower opps */ r = opp_enable(mpu_dev, 800000000); @@ -484,8 +492,9 @@ static void __init beagle_opp_init(void) opp_disable(iva_dev, 660000000); } } - return; + return 0; } +device_initcall(beagle_opp_init); static void __init omap3_beagle_init(void) { @@ -512,8 +521,9 @@ static void __init omap3_beagle_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, - ARRAY_SIZE(omap3beagle_nand_partitions)); + board_nand_init(omap3beagle_nand_partitions, + ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure msecure is mux'd to be able to set the RTC. */ @@ -522,8 +532,6 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - beagle_opp_init(); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b9b776b6c954..3c0b9a90f3b3 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -32,6 +32,7 @@ #include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> #include <linux/usb/otg.h> +#include <linux/usb/musb.h> #include <linux/usb/nop-usb-xceiv.h> #include <linux/smsc911x.h> @@ -45,17 +46,20 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> +#include "soc.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "board-flash.h" + +#define NAND_CS 0 #define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 @@ -731,8 +735,9 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, - ARRAY_SIZE(omap3evm_nand_partitions)); + board_nand_init(omap3evm_nand_partitions, + ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 7bd8253b5d1d..e84e2a875378 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -34,16 +34,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "gpmc-smsc911x.h" -#include <plat/gpmc.h> -#include <plat/sdrc.h> -#include <plat/usb.h> - #include "common.h" #include "mux.h" #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-smsc911x.h" #define OMAP3LOGIC_SMSC911X_CS 1 diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 00a1f4ae6e44..ce31bd329f38 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -42,7 +42,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include <video/omapdss.h> #include <linux/platform_data/mtd-nand-omap2.h> @@ -50,6 +49,7 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc-nand.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -602,7 +602,7 @@ static void __init omap3pandora_init(void) omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); usb_musb_init(NULL); - gpmc_nand_init(&pandora_nand_data); + gpmc_nand_init(&pandora_nand_data, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 731235eb319e..ba1124538b9c 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -40,9 +40,8 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 944ffc436577..a225d819633f 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -44,12 +44,12 @@ #include <asm/system_info.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" #include <asm/setup.h> @@ -59,6 +59,8 @@ #define TB_BL_PWM_TIMER 9 #define TB_KILL_POWER_GPIO 168 +#define NAND_CS 0 + static unsigned long touchbook_revision; static struct mtd_partition omap3touchbook_nand_partitions[] = { @@ -365,8 +367,9 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, - ARRAY_SIZE(omap3touchbook_nand_partitions)); + board_nand_init(omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index bfcd397e233c..8c00b99cd2a3 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -29,6 +29,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/ti_wilink_st.h> +#include <linux/usb/musb.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -38,12 +39,11 @@ #include <asm/mach/map.h> #include <video/omapdss.h> -#include "common.h" -#include <plat/usb.h> -#include <plat/mmc.h> #include <video/omap-panel-tfp410.h> +#include "common.h" #include "soc.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b700685762b5..1cfb0374f5e2 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -49,14 +49,17 @@ #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> -#include <plat/usb.h> +#include "common.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" +#include "gpmc.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 #define OVERO_GPIO_PENDOWN 114 @@ -495,8 +498,8 @@ static void __init overo_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_nand_flash_init(0, overo_nand_partitions, - ARRAY_SIZE(overo_nand_partitions)); + board_nand_init(overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 45997bfbcbd2..1997e0e722a1 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -22,17 +22,14 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <plat/i2c.h> -#include <plat/mmc.h> -#include <plat/usb.h> -#include <plat/gpmc.h> #include "common.h" -#include <plat/serial.h> - #include "mux.h" +#include "gpmc.h" +#include "mmc.h" #include "hsmmc.h" #include "sdram-nokia.h" #include "common-board-devices.h" +#include "gpmc-onenand.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 020e03c95bfe..07005fe40a2a 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -31,9 +31,7 @@ #include <asm/system_info.h> #include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> -#include <plat/omap-pm.h> +#include <plat-omap/dma-omap.h> #include "gpmc-smc91x.h" #include "board-rx51.h" @@ -52,8 +50,11 @@ #endif #include "mux.h" +#include "omap-pm.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-onenand.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 7bbb05d9689b..c388aec14799 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -17,18 +17,18 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> -#include <plat/usb.h> +#include <plat-omap/dma-omap.h> +#include "common.h" #include "mux.h" +#include "gpmc.h" #include "pm.h" #include "sdram-nokia.h" diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index c4f8833b4c3c..5e672c2b6a43 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -14,13 +14,14 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/usb/musb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> static struct omap_musb_board_data musb_board_data = { .set_phy_power = ti81xx_musb_phy_power, diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index afb2278a29f6..42e5f231a799 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -17,10 +17,10 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "soc.h" #include "common.h" diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index b940ab2259fb..1c7c834a5b5f 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -16,8 +16,9 @@ #include <linux/spi/spi.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" +#include "soc.h" #include "common.h" #define LCD_PANEL_RESET_GPIO_PROD 96 diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index c166fe1fdff9..26e07addc9d7 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -26,9 +26,8 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "mux.h" #include "hsmmc.h" diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4994438e1f46..8feb4d99b96d 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -22,9 +22,8 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h" @@ -113,8 +112,9 @@ static void __init omap_zoom_init(void) usbhs_init(&usbhs_bdata); } - board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), - ZOOM_NAND_CS, NAND_BUSWIDTH_16); + board_nand_init(zoom_nand_partitions, + ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS, + NAND_BUSWIDTH_16, nand_default_timings); zoom_debugboard_init(); zoom_peripherals_init(); diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h index 2e9486940ead..2e9486940ead 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/board-zoom.h diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c index c2d15212d64d..73a1414b89b0 100644 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ b/arch/arm/mach-omap2/clkt2xxx_apll.c @@ -21,7 +21,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> #include <plat/prcm.h> #include "clock.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c index 1502a7bc20bb..0890ba94a282 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpll.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpll.c @@ -14,8 +14,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index 4ae439222085..0d2f14c2dcce 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -25,15 +25,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "sram.h" /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c index c3460928b5e0..e1777371bb5e 100644 --- a/arch/arm/mach-omap2/clkt2xxx_osc.c +++ b/arch/arm/mach-omap2/clkt2xxx_osc.c @@ -23,8 +23,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock2xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c index 8693cfdac49a..46683b3c2461 100644 --- a/arch/arm/mach-omap2/clkt2xxx_sys.c +++ b/arch/arm/mach-omap2/clkt2xxx_sys.c @@ -22,8 +22,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock2xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3524f0e7b6d5..a38ebb209721 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -33,16 +33,14 @@ #include <linux/cpufreq.h> #include <linux/slab.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "sram.h" const struct prcm_config *curr_prcm_set; const struct prcm_config *rate_table; diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index 7c6da2f731dc..6cf298e262f6 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -21,14 +21,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "clock.h" #include "clock3xxx.h" #include "clock34xx.h" #include "sdrc.h" +#include "sram.h" #define CYCLES_PER_MHZ 1000000 diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index 3ff22114d702..53646facda45 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -45,8 +45,6 @@ #include <linux/io.h> #include <linux/bug.h> -#include <plat/clock.h> - #include "clock.h" /* Private functions */ diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 80411142f482..8463cc356245 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -21,8 +21,6 @@ #include <asm/div64.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c index 3d43fba2542f..7c8d41e49834 100644 --- a/arch/arm/mach-omap2/clkt_iclk.c +++ b/arch/arm/mach-omap2/clkt_iclk.c @@ -14,7 +14,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> #include <plat/prcm.h> #include "clock.h" diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 961ac8f7e13d..8b30759f8f9e 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -15,6 +15,7 @@ #undef DEBUG #include <linux/kernel.h> +#include <linux/export.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> @@ -25,7 +26,6 @@ #include <asm/cpu.h> -#include <plat/clock.h> #include <plat/prcm.h> #include <trace/events/power.h> @@ -47,6 +47,10 @@ u16 cpu_mask; */ static bool clkdm_control = true; +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + /* * OMAP2+ specific clock functions */ @@ -512,12 +516,510 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, /* Common data */ -struct clk_functions omap2_clk_functions = { - .clk_enable = omap2_clk_enable, - .clk_disable = omap2_clk_disable, - .clk_round_rate = omap2_clk_round_rate, - .clk_set_rate = omap2_clk_set_rate, - .clk_set_parent = omap2_clk_set_parent, - .clk_disable_unused = omap2_clk_disable_unused, +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap2_clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + pr_err("Trying disable clock %s with 0 usecount\n", + clk->name); + WARN_ON(1); + goto out; + } + + omap2_clk_disable(clk); + +out: + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_get_rate); + +/* + * Optional clock functions defined in include/linux/clk.h + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap2_clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap2_clk_set_rate(clk, rate); + if (ret == 0) + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + ret = omap2_clk_set_parent(clk, parent); + if (ret == 0) + propagate_rate(clk); + } else { + ret = -EBUSY; + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * OMAP specific clock functions shared between omap1 and omap2 + */ + +int __initdata mpurate; + +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) +{ + get_option(&str, &mpurate); + + if (!mpurate) + return 1; + + if (mpurate < 1000) + mpurate *= 1000000; + + return 1; +} +__setup("mpurate=", omap_clk_setup); + +/* Used for clocks that always have same value as the parent clock */ +unsigned long followparent_recalc(struct clk *clk) +{ + return clk->parent->rate; +} + +/* + * Used for clocks that have the same value as the parent clock, + * divided by some factor + */ +unsigned long omap_fixed_divisor_recalc(struct clk *clk) +{ + WARN_ON(!clk->fixed_div); + + return clk->parent->rate / clk->fixed_div; +} + +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ +} + +/* Propagate rate to children */ +void propagate_rate(struct clk *tclk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &tclk->children, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +static LIST_HEAD(root_clks); + +/** + * recalculate_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + * Called at init. + */ +void recalculate_root_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +/** + * clk_preinit - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ +void clk_preinit(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + + mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + + list_add(&clk->node, &clocks); + if (clk->init) + clk->init(clk); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->sibling); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +void clk_enable_init_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) + if (clkp->flags & ENABLE_ON_INIT) + clk_enable(clkp); +} + +/** + * omap_clk_get_by_name - locate OMAP struct clk by its name + * @name: name of the struct clk to locate + * + * Locate an OMAP struct clk by its name. Assumes that struct clk + * names are unique. Returns NULL if not found or a pointer to the + * struct clk if found. + */ +struct clk *omap_clk_get_by_name(const char *name) +{ + struct clk *c; + struct clk *ret = NULL; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(c, &clocks, node) { + if (!strcmp(c->name, name)) { + ret = c; + break; + } + } + + mutex_unlock(&clocks_mutex); + + return ret; +} + +int omap_clk_enable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->allow_idle) + c->ops->allow_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +int omap_clk_disable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->deny_idle) + c->ops->deny_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + +/* + * Dummy clock + * + * Used for clock aliases that are needed on some OMAPs, but not others + */ +struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_null, +}; + +/* + * + */ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); + list_for_each_entry(ck, &clocks, node) { + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || !ck->enable_reg) + continue; + + omap2_clk_disable_unused(ck); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +late_initcall(clk_disable_unused); +late_initcall(omap_clk_enable_autoidle_all); +#endif + +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) +/* + * debugfs support to trace clock tree hierarchy and attributes + */ + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static struct dentry *clk_debugfs_root; + +static int clk_dbg_show_summary(struct seq_file *s, void *unused) +{ + struct clk *c; + struct clk *pa; + + mutex_lock(&clocks_mutex); + seq_printf(s, "%-30s %-30s %-10s %s\n", + "clock-name", "parent-name", "rate", "use-count"); + + list_for_each_entry(c, &clocks, node) { + pa = c->parent; + seq_printf(s, "%-30s %-30s %-10lu %d\n", + c->name, pa ? pa->name : "none", c->rate, + c->usecount); + } + mutex_unlock(&clocks_mutex); + + return 0; +} + +static int clk_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_dbg_show_summary, inode->i_private); +} + +static const struct file_operations debug_clock_fops = { + .open = clk_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, }; +static int clk_debugfs_register_one(struct clk *c) +{ + int err; + struct dentry *d; + struct clk *pa = c->parent; + + d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); + if (!d) + return -ENOMEM; + c->dent = d; + + d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); + if (!d) { + err = -ENOMEM; + goto err_out; + } + return 0; + +err_out: + debugfs_remove_recursive(c->dent); + return err; +} + +static int clk_debugfs_register(struct clk *c) +{ + int err; + struct clk *pa = c->parent; + + if (pa && !pa->dent) { + err = clk_debugfs_register(pa); + if (err) + return err; + } + + if (!c->dent) { + err = clk_debugfs_register_one(c); + if (err) + return err; + } + return 0; +} + +static int __init clk_debugfs_init(void) +{ + struct clk *c; + struct dentry *d; + int err; + + d = debugfs_create_dir("clock", NULL); + if (!d) + return -ENOMEM; + clk_debugfs_root = d; + + list_for_each_entry(c, &clocks, node) { + err = clk_debugfs_register(c); + if (err) + goto err_out; + } + + d = debugfs_create_file("summary", S_IRUGO, + d, NULL, &debug_clock_fops); + if (!d) + return -ENOMEM; + + return 0; +err_out: + debugfs_remove_recursive(clk_debugfs_root); + return err; +} +late_initcall(clk_debugfs_init); + +#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ + diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 35ec5f3d9a73..cfba1ffe5cc2 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -17,8 +17,323 @@ #define __ARCH_ARM_MACH_OMAP2_CLOCK_H #include <linux/kernel.h> +#include <linux/list.h> + +#include <linux/clkdev.h> + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +/* Platform flags for the clkdev-OMAP integration code */ +#define CK_242X (1 << 0) +#define CK_243X (1 << 1) /* 243x, 253x */ +#define CK_3430ES1 (1 << 2) /* 34xxES1 only */ +#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */ +#define CK_AM35XX (1 << 4) /* Sitara AM35xx */ +#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */ +#define CK_443X (1 << 6) +#define CK_TI816X (1 << 7) +#define CK_446X (1 << 8) +#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */ + + +#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) +#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) + +struct module; +struct clk; +struct clockdomain; + +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +/* struct clksel_rate.flags possibilities */ +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) +#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ +#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ +#define RATE_IN_36XX (1 << 4) +#define RATE_IN_4430 (1 << 5) +#define RATE_IN_TI816X (1 << 6) +#define RATE_IN_4460 (1 << 7) +#define RATE_IN_AM33XX (1 << 8) +#define RATE_IN_TI814X (1 << 9) + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) +#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) +#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) +#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) + +/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ +#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) + + +/** + * struct clksel_rate - register bitfield values corresponding to clk divisors + * @val: register bitfield value (shifted to bit 0) + * @div: clock divisor corresponding to @val + * @flags: (see "struct clksel_rate.flags possibilities" above) + * + * @val should match the value of a read from struct clk.clksel_reg + * AND'ed with struct clk.clksel_mask, shifted right to bit 0. + * + * @div is the divisor that should be applied to the parent clock's rate + * to produce the current clock's rate. + */ +struct clksel_rate { + u32 val; + u8 div; + u16 flags; +}; + +/** + * struct clksel - available parent clocks, and a pointer to their divisors + * @parent: struct clk * to a possible parent clock + * @rates: available divisors for this parent clock + * + * A struct clksel is always associated with one or more struct clks + * and one or more struct clksel_rates. + */ +struct clksel { + struct clk *parent; + const struct clksel_rate *rates; +}; + +/** + * struct dpll_data - DPLL registers and integration data + * @mult_div1_reg: register containing the DPLL M and N bitfields + * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg + * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg + * @clk_bypass: struct clk pointer to the clock's bypass clock input + * @clk_ref: struct clk pointer to the clock's reference clock input + * @control_reg: register containing the DPLL mode bitfield + * @enable_mask: mask of the DPLL mode bitfield in @control_reg + * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() + * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @max_multiplier: maximum valid non-bypass multiplier value (actual) + * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() + * @min_divider: minimum valid non-bypass divider value (actual) + * @max_divider: maximum valid non-bypass divider value (actual) + * @modes: possible values of @enable_mask + * @autoidle_reg: register containing the DPLL autoidle mode bitfield + * @idlest_reg: register containing the DPLL idle status bitfield + * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg + * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg + * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg + * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs + * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs + * @flags: DPLL type/features (see below) + * + * Possible values for @flags: + * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) + * + * @freqsel_mask is only used on the OMAP34xx family and AM35xx. + * + * XXX Some DPLLs have multiple bypass inputs, so it's not technically + * correct to only have one @clk_bypass pointer. + * + * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, + * @last_rounded_n) should be separated from the runtime-fixed fields + * and placed into a different structure, so that the runtime-fixed data + * can be placed into read-only space. + */ +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; + struct clk *clk_bypass; + struct clk *clk_ref; + void __iomem *control_reg; + u32 enable_mask; + unsigned long last_rounded_rate; + u16 last_rounded_m; + u16 max_multiplier; + u8 last_rounded_n; + u8 min_divider; + u16 max_divider; + u8 modes; + void __iomem *autoidle_reg; + void __iomem *idlest_reg; + u32 autoidle_mask; + u32 freqsel_mask; + u32 idlest_mask; + u32 dco_mask; + u32 sddiv_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; + u8 flags; +}; + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +}; + +extern int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; -#include <plat/clock.h> /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */ #define CORE_CLK_SRC_32K 0x0 diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index c3cde1a2b6de..ff47a6c2611d 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -18,8 +18,6 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" @@ -1935,8 +1933,6 @@ int __init omap2420_clk_init(void) cpu_mask = RATE_IN_242X; rate_table = omap2420_rate_table; - clk_init(&omap2_clk_functions); - for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks); c++) clk_preinit(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c index a8e326177466..850f83e8954f 100644 --- a/arch/arm/mach-omap2/clock2430.c +++ b/arch/arm/mach-omap2/clock2430.c @@ -21,8 +21,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "soc.h" #include "iomap.h" #include "clock.h" diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 22404fe435e7..cab8e9c52d6e 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -17,8 +17,6 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" @@ -2034,8 +2032,6 @@ int __init omap2430_clk_init(void) cpu_mask = RATE_IN_243X; rate_table = omap2430_rate_table; - clk_init(&omap2_clk_functions); - for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks); c++) clk_preinit(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index e92be1fc1a00..5feee16fee0e 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -22,8 +22,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 114ab4b8e0e3..17e3de51bcba 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -17,9 +17,8 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/clk.h> -#include <plat/clkdev_omap.h> -#include "am33xx.h" +#include "soc.h" #include "iomap.h" #include "control.h" #include "clock.h" @@ -1073,6 +1072,8 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX), + CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX), + CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX), }; int __init am33xx_clk_init(void) @@ -1085,8 +1086,6 @@ int __init am33xx_clk_init(void) cpu_clkflg = CK_AM33XX; } - clk_init(&omap2_clk_functions); - for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) clk_preinit(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 1fc96b9ee330..baaaa4258708 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -21,8 +21,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock34xx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c index 2e97d08f0e56..80209050cd7a 100644 --- a/arch/arm/mach-omap2/clock3517.c +++ b/arch/arm/mach-omap2/clock3517.c @@ -21,8 +21,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock3517.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c index 0c5e25ed8879..0e1e9e4e2fa4 100644 --- a/arch/arm/mach-omap2/clock36xx.c +++ b/arch/arm/mach-omap2/clock36xx.c @@ -22,8 +22,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock36xx.h" diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 83bb01427d40..3e8aca2b1b61 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -21,8 +21,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "clock3xxx.h" diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 1f42c9d5ecf3..a02d158568e8 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -21,8 +21,6 @@ #include <linux/list.h> #include <linux/io.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" @@ -3573,8 +3571,6 @@ int __init omap3xxx_clk_init(void) else dpll4_dd = dpll4_dd_34xx; - clk_init(&omap2_clk_functions); - for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); c++) clk_preinit(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 6efc30c961a5..2a450c9b9a7b 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -28,8 +28,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" @@ -3366,8 +3364,6 @@ int __init omap4xxx_clk_init(void) return 0; } - clk_init(&omap2_clk_functions); - /* * Must stay commented until all OMAP SoC drivers are * converted to runtime PM, or drivers may start crashing diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 512e79a842cb..64e50465a4b5 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -27,7 +27,8 @@ #include <linux/bitops.h> -#include <plat/clock.h> +#include "soc.h" +#include "clock.h" #include "clockdomain.h" /* clkdm_list contains all registered struct clockdomains */ diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 629576be7444..bc42446e23ab 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -18,9 +18,8 @@ #include <linux/spinlock.h> #include "powerdomain.h" -#include <plat/clock.h> -#include <plat/omap_hwmod.h> -#include <plat/cpu.h> +#include "clock.h" +#include "omap_hwmod.h" /* * Clockdomain flags diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index 70294f54e35a..3e4e9209b2df 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -14,6 +14,8 @@ #include <linux/types.h> #include <plat/prcm.h> + +#include "soc.h" #include "prm.h" #include "prm2xxx_3xxx.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c index 5c741852fac0..7e76becf3a4a 100644 --- a/arch/arm/mach-omap2/clockdomains2420_data.c +++ b/arch/arm/mach-omap2/clockdomains2420_data.c @@ -35,6 +35,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include "soc.h" #include "clockdomain.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c index f09617555e15..b923007e45d0 100644 --- a/arch/arm/mach-omap2/clockdomains2430_data.c +++ b/arch/arm/mach-omap2/clockdomains2430_data.c @@ -35,6 +35,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include "soc.h" #include "clockdomain.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 933a35cd124a..e6b91e552d3d 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -33,6 +33,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include "soc.h" #include "clockdomain.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 13f56eafef03..ed8dcaf4c849 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -22,8 +22,6 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> - #include "cm.h" #include "cm33xx.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 48daac2581b4..ad856092c06a 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -25,7 +25,6 @@ #include <linux/spi/ads7846.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" #include "common-board-devices.h" @@ -96,48 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, { } #endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -static struct omap_nand_platform_data nand_data; - -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - pr_info("NAND: Unable to find configuration in GPMC\n"); - return; - } - - if (nandcs < GPMC_CS_NUM) { - nand_data.cs = nandcs; - nand_data.parts = parts; - nand_data.nr_parts = nr_parts; - nand_data.devsize = options; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} -#else -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ -} -#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index a0b4a42836ab..72bb41b3fd25 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -10,6 +10,5 @@ struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct ads7846_platform_data *board_pdata); -void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 17950c6e130b..34fb5b95859b 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -16,14 +16,17 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/platform_data/dsp-omap.h> -#include <plat/clock.h> +#include <plat/vram.h> #include "soc.h" #include "iomap.h" #include "common.h" +#include "clock.h" #include "sdrc.h" #include "control.h" +#include "omap-secure.h" /* Global address base setup code */ @@ -200,3 +203,20 @@ void __init omap5_map_io(void) omap5_map_common_io(); } #endif + +/* + * Stub function for OMAP2 so that common files + * continue to build when custom builds are used + */ +int __weak omap_secure_ram_reserve_memblock(void) +{ + return 0; +} + +void __init omap_reserve(void) +{ + omap_vram_reserve_sdram_memblock(); + omap_dsp_reserve_sdram_memblock(); + omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); +} diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 7045e4d61ac3..426fcfcfd821 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -28,13 +28,16 @@ #include <linux/irq.h> #include <linux/delay.h> +#include <linux/i2c.h> #include <linux/i2c/twl.h> +#include <linux/i2c-omap.h> #include <asm/proc-fns.h> -#include <plat/cpu.h> -#include <plat/serial.h> -#include <plat/common.h> +#include "i2c.h" +#include "serial.h" + +#include "usb.h" #define OMAP_INTC_START NR_IRQS @@ -338,6 +341,10 @@ extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); struct omap2_hsmmc_info; extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); +extern void omap_reserve(void); + +struct omap_hwmod; +extern int omap_dss_reset(struct omap_hwmod *); #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index d1ff8399a222..bf2be5c5468d 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -1,7 +1,7 @@ /* * OMAP2/3 System Control Module register access * - * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007, 2012 Texas Instruments, Inc. * Copyright (C) 2007 Nokia Corporation * * Written by Paul Walmsley @@ -15,8 +15,6 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/sdrc.h> - #include "soc.h" #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index cba60e05e32e..2ad491d6910b 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -23,10 +23,11 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> +#include <plat-omap/dma-omap.h> + #include "iomap.h" -#include <plat/dma.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "omap4-keypad.h" #include "soc.h" @@ -34,6 +35,7 @@ #include "mux.h" #include "control.h" #include "devices.h" +#include "dma.h" #define L3_MODULES_MAX_LEN 12 #define L3_MODULES 3 diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 1011995f150a..89c57129357a 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -25,11 +25,12 @@ #include <linux/delay.h> #include <video/omapdss.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "omap_hwmod.h" +#include "omap_device.h" +#include "omap-pm.h" #include "common.h" +#include "soc.h" #include "iomap.h" #include "mux.h" #include "control.h" @@ -284,6 +285,35 @@ err: return ERR_PTR(r); } +static enum omapdss_version __init omap_display_get_version(void) +{ + if (cpu_is_omap24xx()) + return OMAPDSS_VER_OMAP24xx; + else if (cpu_is_omap3630()) + return OMAPDSS_VER_OMAP3630; + else if (cpu_is_omap34xx()) { + if (soc_is_am35xx()) { + return OMAPDSS_VER_AM35xx; + } else { + if (omap_rev() < OMAP3430_REV_ES3_0) + return OMAPDSS_VER_OMAP34xx_ES1; + else + return OMAPDSS_VER_OMAP34xx_ES3; + } + } else if (omap_rev() == OMAP4430_REV_ES1_0) + return OMAPDSS_VER_OMAP4430_ES1; + else if (omap_rev() == OMAP4430_REV_ES2_0 || + omap_rev() == OMAP4430_REV_ES2_1 || + omap_rev() == OMAP4430_REV_ES2_2) + return OMAPDSS_VER_OMAP4430_ES2; + else if (cpu_is_omap44xx()) + return OMAPDSS_VER_OMAP4; + else if (soc_is_omap54xx()) + return OMAPDSS_VER_OMAP5; + else + return OMAPDSS_VER_UNKNOWN; +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; @@ -291,9 +321,18 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) int i, oh_count; const struct omap_dss_hwmod_data *curr_dss_hwmod; struct platform_device *dss_pdev; + enum omapdss_version ver; /* create omapdss device */ + ver = omap_display_get_version(); + + if (ver == OMAPDSS_VER_UNKNOWN) { + pr_err("DSS not supported on this SoC\n"); + return -ENODEV; + } + + board_data->version = ver; board_data->dsi_enable_pads = omap_dsi_enable_pads; board_data->dsi_disable_pads = omap_dsi_disable_pads; board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count; diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index ff75abe60af2..e5aba58da5d2 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,9 +28,11 @@ #include <linux/init.h> #include <linux/device.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> + +#include "soc.h" +#include "omap_hwmod.h" +#include "omap_device.h" #define OMAP2_DMA_STRIDE 0x60 @@ -274,6 +276,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) return -ENOMEM; } + if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + d->dev_caps |= HS_CHANNELS_RESERVED; + /* Check the capabilities register for descriptor loading feature */ if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS) dma_common_ch_end = CCDN; diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h new file mode 100644 index 000000000000..eba80dbc5218 --- /dev/null +++ b/arch/arm/mach-omap2/dma.h @@ -0,0 +1,131 @@ +/* + * OMAP2PLUS DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP2PLUS_DMA_CHANNEL_H +#define __OMAP2PLUS_DMA_CHANNEL_H + + +/* DMA channels for 24xx */ +#define OMAP24XX_DMA_NO_DEVICE 0 +#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ +#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ +#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ +#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ +#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ +#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ +#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ +#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ +#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ +#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ +#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ +#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ +#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ +#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ +#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ +#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ +#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ +#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ +#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ +#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ +#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ +#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ +#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ +#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ +#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ +#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ +#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ +#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ +#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ +#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ +#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ +#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ +#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ +#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ +#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ +#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ +#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ +#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ +#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ +#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ +#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ +#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ +#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ +#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ +#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ +#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ +#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ +#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ +#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ +#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ +#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ +#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ +#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ +#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ +#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ +#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ +#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ +#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ +#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ +#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ +#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ +#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ +#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ +#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ +#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ +#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ +#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ +#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ +#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ +#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ +#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ +#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ +#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ +#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ +#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ +#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ +#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ +#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ +#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ +#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ +#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ +#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ +#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ +#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ +#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ +#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ +#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ +#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ +#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ +#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ +#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ +#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ +#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ +#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ + +#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ +#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + +#endif /* __OMAP2PLUS_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 814e1808e158..eacf51f2bc27 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -28,8 +28,6 @@ #include <linux/bitops.h> #include <linux/clkdev.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 09d0ccccb861..5854da168a9c 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -15,8 +15,6 @@ #include <linux/io.h> #include <linux/bitops.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "clock44xx.h" diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 72e0f01b715c..6282cc826613 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -24,8 +24,8 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <plat/omap_device.h> -#include <plat/omap_hwmod.h> +#include "omap_device.h" +#include "omap_hwmod.h" #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 98388109f22a..b155500e84a8 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -27,7 +27,7 @@ #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS -#include <plat/omap-pm.h> +#include "omap-pm.h" #endif #include <linux/platform_data/dsp-omap.h> diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index d1058f16fb40..399acabc3d0b 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -23,9 +23,9 @@ #include <linux/of.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "omap_hwmod.h" +#include "omap_device.h" +#include "omap-pm.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4acf497faeb3..db969a5c4998 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -17,9 +17,12 @@ #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-nand.h" + +/* minimum size for IO mapping */ +#define NAND_IO_SIZE 4 static struct resource gpmc_nand_resource[] = { { @@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = { .resource = gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) +static int omap2_nand_gpmc_retime( + struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { struct gpmc_timings t; int err; - if (!gpmc_nand_data->gpmc_t) - return 0; - memset(&t, 0, sizeof(t)); - t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk; - t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on); - t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on); + t.sync_clk = gpmc_t->sync_clk; + t.cs_on = gpmc_t->cs_on; + t.adv_on = gpmc_t->adv_on; /* Read */ - t.adv_rd_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_rd_off); + t.adv_rd_off = gpmc_t->adv_rd_off; t.oe_on = t.adv_on; - t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access); - t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off); - t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off); - t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle); + t.access = gpmc_t->access; + t.oe_off = gpmc_t->oe_off; + t.cs_rd_off = gpmc_t->cs_rd_off; + t.rd_cycle = gpmc_t->rd_cycle; /* Write */ - t.adv_wr_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_wr_off); + t.adv_wr_off = gpmc_t->adv_wr_off; t.we_on = t.oe_on; if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_data_mux_bus); - t.wr_access = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_access); + t.wr_data_mux_bus = gpmc_t->wr_data_mux_bus; + t.wr_access = gpmc_t->wr_access; } - t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off); - t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off); - t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle); + t.we_off = gpmc_t->we_off; + t.cs_wr_off = gpmc_t->cs_wr_off; + t.wr_cycle = gpmc_t->wr_cycle; /* Configure GPMC */ if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) @@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data return 0; } -int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) +static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) +{ + /* support only OMAP3 class */ + if (!cpu_is_omap34xx()) { + pr_err("BCH ecc is not supported on this CPU\n"); + return 0; + } + + /* + * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. + * Other chips may be added if confirmed to work. + */ + if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) && + (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { + pr_err("BCH 4-bit mode is not supported on this CPU\n"); + return 0; + } + + return 1; +} + +int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { int err = 0; struct device *dev = &gpmc_nand_device.dev; @@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); gpmc_nand_resource[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); - /* Set timings in GPMC */ - err = omap2_nand_gpmc_retime(gpmc_nand_data); - if (err < 0) { - dev_err(dev, "Unable to set gpmc timings: %d\n", err); - return err; + + if (gpmc_t) { + err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); + if (err < 0) { + dev_err(dev, "Unable to set gpmc timings: %d\n", err); + return err; + } } /* Enable RD PIN Monitoring Reg */ @@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); + if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) + return -EINVAL; + err = platform_device_register(&gpmc_nand_device); if (err < 0) { dev_err(dev, "Unable to register NAND device\n"); diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h new file mode 100644 index 000000000000..d59e1281e851 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-nand.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-omap2/gpmc-nand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_NAND_H +#define __OMAP2_GPMC_NAND_H + +#include "gpmc.h" +#include <linux/platform_data/mtd-nand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) +extern int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t); +#else +static inline int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 916716e1da3b..94a349e4dc96 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -16,15 +16,24 @@ #include <linux/mtd/onenand_regs.h> #include <linux/io.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/err.h> #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-onenand.h" #define ONENAND_IO_SIZE SZ_128K +#define ONENAND_FLAG_SYNCREAD (1 << 0) +#define ONENAND_FLAG_SYNCWRITE (1 << 1) +#define ONENAND_FLAG_HF (1 << 2) +#define ONENAND_FLAG_VHF (1 << 3) + +static unsigned onenand_flags; +static unsigned latency; + static struct omap_onenand_platform_data *gpmc_onenand_data; static struct resource gpmc_onenand_resource = { @@ -38,11 +47,10 @@ static struct platform_device gpmc_onenand_device = { .resource = &gpmc_onenand_resource, }; -static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) +static struct gpmc_timings omap2_onenand_calc_async_timings(void) { + struct gpmc_device_timings dev_t; struct gpmc_timings t; - u32 reg; - int err; const int t_cer = 15; const int t_avdp = 12; @@ -51,60 +59,49 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_aa = 76; const int t_oe = 20; const int t_cez = 20; /* max of t_cez, t_oez */ - const int t_ds = 30; const int t_wpl = 40; const int t_wph = 30; - /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + memset(&dev_t, 0, sizeof(dev_t)); - memset(&t, 0, sizeof(t)); - t.sync_clk = 0; - t.cs_on = 0; - t.adv_on = 0; - - /* Read */ - t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer)); - t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh); - t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa); - t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce)); - t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe)); - t.oe_off = t.access + gpmc_round_ns_to_ticks(1); - t.cs_rd_off = t.oe_off; - t.rd_cycle = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez); - - /* Write */ - t.adv_wr_off = t.adv_rd_off; - t.we_on = t.oe_on; - if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = t.we_on; - t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds); - } - t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl); - t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); - t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + dev_t.mux = true; + dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000; + dev_t.t_avdp_w = dev_t.t_avdp_r; + dev_t.t_aavdh = t_aavdh * 1000; + dev_t.t_aa = t_aa * 1000; + dev_t.t_ce = t_ce * 1000; + dev_t.t_oe = t_oe * 1000; + dev_t.t_cez_r = t_cez * 1000; + dev_t.t_cez_w = dev_t.t_cez_r; + dev_t.t_wpl = t_wpl * 1000; + dev_t.t_wph = t_wph * 1000; + + gpmc_calc_timings(&t, &dev_t); + + return t; +} +static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) +{ /* Configure GPMC for asynchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static void omap2_onenand_set_async_mode(void __iomem *onenand_base) +{ + u32 reg; /* Ensure sync read and sync write are disabled */ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); - - return 0; } -static void set_onenand_cfg(void __iomem *onenand_base, int latency, - int sync_read, int sync_write, int hf, int vhf) +static void set_onenand_cfg(void __iomem *onenand_base) { u32 reg; @@ -112,19 +109,19 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; - if (sync_read) + if (onenand_flags & ONENAND_FLAG_SYNCREAD) reg |= ONENAND_SYS_CFG1_SYNC_READ; else reg &= ~ONENAND_SYS_CFG1_SYNC_READ; - if (sync_write) + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) reg |= ONENAND_SYS_CFG1_SYNC_WRITE; else reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; - if (hf) + if (onenand_flags & ONENAND_FLAG_HF) reg |= ONENAND_SYS_CFG1_HF; else reg &= ~ONENAND_SYS_CFG1_HF; - if (vhf) + if (onenand_flags & ONENAND_FLAG_VHF) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; @@ -132,21 +129,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, } static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, bool *clk_dep) + void __iomem *onenand_base) { u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); - int freq = 0; - - if (cfg->get_freq) { - struct onenand_freq_info fi; - - fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID); - fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID); - fi.ver_id = ver; - freq = cfg->get_freq(&fi, clk_dep); - if (freq) - return freq; - } + int freq; switch ((ver >> 4) & 0xf) { case 0: @@ -172,41 +158,24 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, return freq; } -static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, - int *freq_ptr) +static struct gpmc_timings +omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, + int freq) { + struct gpmc_device_timings dev_t; struct gpmc_timings t; const int t_cer = 15; const int t_avdp = 12; const int t_cez = 20; /* max of t_cez, t_oez */ - const int t_ds = 30; const int t_wpl = 40; const int t_wph = 30; int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; - int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; - int err, ticks_cez; - int cs = cfg->cs, freq = *freq_ptr; - u32 reg; - bool clk_dep = false; + int div, gpmc_clk_ns; - if (cfg->flags & ONENAND_SYNC_READ) { - sync_read = 1; - } else if (cfg->flags & ONENAND_SYNC_READWRITE) { - sync_read = 1; - sync_write = 1; - } else - return omap2_onenand_set_async_mode(cs, onenand_base); - - if (!freq) { - /* Very first call freq is not known */ - err = omap2_onenand_set_async_mode(cs, onenand_base); - if (err) - return err; - freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep); - first_time = 1; - } + if (cfg->flags & ONENAND_SYNC_READ) + onenand_flags = ONENAND_FLAG_SYNCREAD; + else if (cfg->flags & ONENAND_SYNC_READWRITE) + onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; switch (freq) { case 104: @@ -244,116 +213,67 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, t_ach = 9; t_aavdh = 7; t_rdyo = 15; - sync_write = 0; + onenand_flags &= ~ONENAND_FLAG_SYNCWRITE; break; } - div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); + div = gpmc_calc_divider(min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); if (gpmc_clk_ns < 15) /* >66Mhz */ - hf = 1; + onenand_flags |= ONENAND_FLAG_HF; + else + onenand_flags &= ~ONENAND_FLAG_HF; if (gpmc_clk_ns < 12) /* >83Mhz */ - vhf = 1; - if (vhf) + onenand_flags |= ONENAND_FLAG_VHF; + else + onenand_flags &= ~ONENAND_FLAG_VHF; + if (onenand_flags & ONENAND_FLAG_VHF) latency = 8; - else if (hf) + else if (onenand_flags & ONENAND_FLAG_HF) latency = 6; else if (gpmc_clk_ns >= 25) /* 40 MHz*/ latency = 3; else latency = 4; - if (clk_dep) { - if (gpmc_clk_ns < 12) { /* >83Mhz */ - t_ces = 3; - t_avds = 4; - } else if (gpmc_clk_ns < 15) { /* >66Mhz */ - t_ces = 5; - t_avds = 4; - } else if (gpmc_clk_ns < 25) { /* >40Mhz */ - t_ces = 6; - t_avds = 5; - } else { - t_ces = 7; - t_avds = 7; - } - } + /* Set synchronous read timings */ + memset(&dev_t, 0, sizeof(dev_t)); - if (first_time) - set_onenand_cfg(onenand_base, latency, - sync_read, sync_write, hf, vhf); - - if (div == 1) { - reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); - reg |= (1 << 7); - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg); - reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3); - reg |= (1 << 7); - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg); - reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4); - reg |= (1 << 7); - reg |= (1 << 23); - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); + dev_t.mux = true; + dev_t.sync_read = true; + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { + dev_t.sync_write = true; } else { - reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); - reg &= ~(1 << 7); - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg); - reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3); - reg &= ~(1 << 7); - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg); - reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4); - reg &= ~(1 << 7); - reg &= ~(1 << 23); - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); + dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000; + dev_t.t_wpl = t_wpl * 1000; + dev_t.t_wph = t_wph * 1000; + dev_t.t_aavdh = t_aavdh * 1000; } + dev_t.ce_xdelay = true; + dev_t.avd_xdelay = true; + dev_t.oe_xdelay = true; + dev_t.we_xdelay = true; + dev_t.clk = min_gpmc_clk_period; + dev_t.t_bacc = dev_t.clk; + dev_t.t_ces = t_ces * 1000; + dev_t.t_avds = t_avds * 1000; + dev_t.t_avdh = t_avdh * 1000; + dev_t.t_ach = t_ach * 1000; + dev_t.cyc_iaa = (latency + 1); + dev_t.t_cez_r = t_cez * 1000; + dev_t.t_cez_w = dev_t.t_cez_r; + dev_t.cyc_aavdh_oe = 1; + dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period; + + gpmc_calc_timings(&t, &dev_t); + + return t; +} - /* Set synchronous read timings */ - memset(&t, 0, sizeof(t)); - t.sync_clk = min_gpmc_clk_period; - t.cs_on = 0; - t.adv_on = 0; - fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds)); - fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns); - t.page_burst_access = gpmc_clk_ns; - - /* Read */ - t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh)); - t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach)); - /* Force at least 1 clk between AVD High to OE Low */ - if (t.oe_on <= t.adv_rd_off) - t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(1); - t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div); - t.oe_off = t.access + gpmc_round_ns_to_ticks(1); - t.cs_rd_off = t.oe_off; - ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div; - t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div + - ticks_cez); - - /* Write */ - if (sync_write) { - t.adv_wr_off = t.adv_rd_off; - t.we_on = 0; - t.we_off = t.cs_rd_off; - t.cs_wr_off = t.cs_rd_off; - t.wr_cycle = t.rd_cycle; - if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset + - gpmc_ps_to_ticks(min_gpmc_clk_period + - t_rdyo * 1000)); - t.wr_access = t.access; - } - } else { - t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int, - t_avdp, t_cer)); - t.we_on = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh); - t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl); - t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); - t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); - if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = t.we_on; - t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds); - } - } +static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) +{ + unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; + unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; /* Configure GPMC for synchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, @@ -362,7 +282,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) | (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) | (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) | - GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) | GPMC_CONFIG1_PAGE_LEN(2) | (cpu_is_omap34xx() ? 0 : (GPMC_CONFIG1_WAIT_READ_MON | @@ -371,11 +290,45 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, GPMC_CONFIG1_DEVICETYPE_NOR | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static int omap2_onenand_setup_async(void __iomem *onenand_base) +{ + struct gpmc_timings t; + int ret; + + omap2_onenand_set_async_mode(onenand_base); + + t = omap2_onenand_calc_async_timings(); + + ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + omap2_onenand_set_async_mode(onenand_base); + + return 0; +} + +static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) +{ + int ret, freq = *freq_ptr; + struct gpmc_timings t; - set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf); + if (!freq) { + /* Very first call freq is not known */ + freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); + set_onenand_cfg(onenand_base); + } + + t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); + + ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + set_onenand_cfg(onenand_base); *freq_ptr = freq; @@ -385,15 +338,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) { struct device *dev = &gpmc_onenand_device.dev; + unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE; + int ret; - /* Set sync timings in GPMC */ - if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, - freq_ptr) < 0) { - dev_err(dev, "Unable to set synchronous mode\n"); - return -EINVAL; + ret = omap2_onenand_setup_async(onenand_base); + if (ret) { + dev_err(dev, "unable to set to async mode\n"); + return ret; } - return 0; + if (!(gpmc_onenand_data->flags & l)) + return 0; + + ret = omap2_onenand_setup_sync(onenand_base, freq_ptr); + if (ret) + dev_err(dev, "unable to set to sync mode\n"); + return ret; } void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) @@ -411,6 +371,11 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } + if (cpu_is_omap34xx()) + gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX; + else + gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX; + err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, (unsigned long *)&gpmc_onenand_resource.start); if (err < 0) { diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h new file mode 100644 index 000000000000..216f23a8b45c --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-onenand.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-omap2/gpmc-onenand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_ONENAND_H +#define __OMAP2_GPMC_ONENAND_H + +#include <linux/platform_data/mtd-onenand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); +#else +#define board_onenand_data NULL +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 565475310374..11d0b756f098 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include "soc.h" @@ -58,6 +58,7 @@ static struct platform_device gpmc_smc91x_device = { static int smc91c96_gpmc_retime(void) { struct gpmc_timings t; + struct gpmc_device_timings dev_t; const int t3 = 10; /* Figure 12.2 read and 12.4 write */ const int t4_r = 20; /* Figure 12.2 read */ const int t4_w = 5; /* Figure 12.4 write */ @@ -68,32 +69,6 @@ static int smc91c96_gpmc_retime(void) const int t20 = 185; /* Figure 12.2 read and 12.4 write */ u32 l; - memset(&t, 0, sizeof(t)); - - /* Read timings */ - t.cs_on = 0; - t.adv_on = t.cs_on; - t.oe_on = t.adv_on + t3; - t.access = t.oe_on + t5; - t.oe_off = t.access; - t.adv_rd_off = t.oe_off + max(t4_r, t6); - t.cs_rd_off = t.oe_off; - t.rd_cycle = t20 - t.oe_on; - - /* Write timings */ - t.we_on = t.adv_on + t3; - - if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) { - t.wr_data_mux_bus = t.we_on; - t.we_off = t.wr_data_mux_bus + t7; - } else - t.we_off = t.we_on + t7; - if (cpu_is_omap34xx()) - t.wr_access = t.we_off; - t.adv_wr_off = t.we_off + max(t4_w, t8); - t.cs_wr_off = t.we_off + t4_w; - t.wr_cycle = t20 - t.we_on; - l = GPMC_CONFIG1_DEVICESIZE_16; if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) l |= GPMC_CONFIG1_MUXADDDATA; @@ -115,6 +90,22 @@ static int smc91c96_gpmc_retime(void) if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) return 0; + memset(&dev_t, 0, sizeof(dev_t)); + + dev_t.t_oeasu = t3 * 1000; + dev_t.t_oe = t5 * 1000; + dev_t.t_cez_r = t4_r * 1000; + dev_t.t_oez = t6 * 1000; + dev_t.t_rd_cycle = (t20 - t3) * 1000; + + dev_t.t_weasu = t3 * 1000; + dev_t.t_wpl = t7 * 1000; + dev_t.t_wph = t8 * 1000; + dev_t.t_cez_w = t4_w * 1000; + dev_t.t_wr_cycle = (t20 - t3) * 1000; + + gpmc_calc_timings(&t, &dev_t); + return gpmc_cs_set_timings(gpmc_cfg->cs, &t); } diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 249a0b440cd6..ef990118d32b 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/smsc911x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" static struct resource gpmc_smsc911x_resources[] = { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 92b5718fa722..65468f6d7f0e 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -26,16 +26,14 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <asm/mach-types.h> -#include <plat/gpmc.h> +#include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/cpu.h> -#include <plat/gpmc.h> -#include <plat/sdrc.h> -#include <plat/omap_device.h> +#include <asm/mach-types.h> #include "soc.h" #include "common.h" +#include "omap_device.h" +#include "gpmc.h" #define DEVICE_NAME "omap-gpmc" @@ -59,6 +57,9 @@ #define GPMC_ECC_SIZE_CONFIG 0x1fc #define GPMC_ECC1_RESULT 0x200 #define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ /* GPMC ECC control settings */ #define GPMC_ECC_CTRL_ECCCLEAR 0x100 @@ -73,8 +74,16 @@ #define GPMC_ECC_CTRL_ECCREG8 0x008 #define GPMC_ECC_CTRL_ECCREG9 0x009 +#define GPMC_CONFIG2_CSEXTRADELAY BIT(7) +#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7) +#define GPMC_CONFIG4_OEEXTRADELAY BIT(7) +#define GPMC_CONFIG4_WEEXTRADELAY BIT(23) +#define GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN BIT(6) +#define GPMC_CONFIG6_CYCLE2CYCLESAMECSEN BIT(7) + #define GPMC_CS0_OFFSET 0x60 #define GPMC_CS_SIZE 0x30 +#define GPMC_BCH_SIZE 0x10 #define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF @@ -137,7 +146,6 @@ static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ -static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */ static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -158,22 +166,6 @@ static u32 gpmc_read_reg(int idx) return __raw_readl(gpmc_base + idx); } -static void gpmc_cs_write_byte(int cs, int idx, u8 val) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - __raw_writeb(val, reg_addr); -} - -static u8 gpmc_cs_read_byte(int cs, int idx) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - return __raw_readb(reg_addr); -} - void gpmc_cs_write_reg(int cs, int idx, u32 val) { void __iomem *reg_addr; @@ -238,6 +230,51 @@ unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns) return ticks * gpmc_get_fclk_period() / 1000; } +static unsigned int gpmc_ticks_to_ps(unsigned int ticks) +{ + return ticks * gpmc_get_fclk_period(); +} + +static unsigned int gpmc_round_ps_to_ticks(unsigned int time_ps) +{ + unsigned long ticks = gpmc_ps_to_ticks(time_ps); + + return ticks * gpmc_get_fclk_period(); +} + +static inline void gpmc_cs_modify_reg(int cs, int reg, u32 mask, bool value) +{ + u32 l; + + l = gpmc_cs_read_reg(cs, reg); + if (value) + l |= mask; + else + l &= ~mask; + gpmc_cs_write_reg(cs, reg, l); +} + +static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p) +{ + gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG1, + GPMC_CONFIG1_TIME_PARA_GRAN, + p->time_para_granularity); + gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG2, + GPMC_CONFIG2_CSEXTRADELAY, p->cs_extra_delay); + gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG3, + GPMC_CONFIG3_ADVEXTRADELAY, p->adv_extra_delay); + gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4, + GPMC_CONFIG4_OEEXTRADELAY, p->oe_extra_delay); + gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4, + GPMC_CONFIG4_OEEXTRADELAY, p->we_extra_delay); + gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6, + GPMC_CONFIG6_CYCLE2CYCLESAMECSEN, + p->cycle2cyclesamecsen); + gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6, + GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN, + p->cycle2cyclediffcsen); +} + #ifdef DEBUG static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, int time, const char *name) @@ -288,7 +325,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, return -1 #endif -int gpmc_cs_calc_divider(int cs, unsigned int sync_clk) +int gpmc_calc_divider(unsigned int sync_clk) { int div; u32 l; @@ -308,7 +345,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) int div; u32 l; - div = gpmc_cs_calc_divider(cs, t->sync_clk); + div = gpmc_calc_divider(t->sync_clk); if (div < 0) return div; @@ -331,6 +368,12 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access); + GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround); + GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay); + + GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring); + GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation); + if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS) GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus); if (gpmc_capability & GPMC_HAS_WR_ACCESS) @@ -350,6 +393,8 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l); } + gpmc_cs_bool_timings(cs, &t->bool_timings); + return 0; } @@ -509,44 +554,6 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** - * gpmc_read_status - read access request to get the different gpmc status - * @cmd: command type - * @return status - */ -int gpmc_read_status(int cmd) -{ - int status = -EINVAL; - u32 regval = 0; - - switch (cmd) { - case GPMC_GET_IRQ_STATUS: - status = gpmc_read_reg(GPMC_IRQSTATUS); - break; - - case GPMC_PREFETCH_FIFO_CNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval); - break; - - case GPMC_PREFETCH_COUNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_COUNT(regval); - break; - - case GPMC_STATUS_BUFFER: - regval = gpmc_read_reg(GPMC_STATUS); - /* 1 : buffer is available to write */ - status = regval & GPMC_STATUS_BUFF_EMPTY; - break; - - default: - printk(KERN_ERR "gpmc_read_status: Not supported\n"); - } - return status; -} -EXPORT_SYMBOL(gpmc_read_status); - -/** * gpmc_cs_configure - write request to configure gpmc * @cs: chip select number * @cmd: command type @@ -614,121 +621,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval) } EXPORT_SYMBOL(gpmc_cs_configure); -/** - * gpmc_nand_read - nand specific read access request - * @cs: chip select number - * @cmd: command type - */ -int gpmc_nand_read(int cs, int cmd) -{ - int rval = -EINVAL; - - switch (cmd) { - case GPMC_NAND_DATA: - rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA); - break; - - default: - printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n"); - } - return rval; -} -EXPORT_SYMBOL(gpmc_nand_read); - -/** - * gpmc_nand_write - nand specific write request - * @cs: chip select number - * @cmd: command type - * @wval: value to write - */ -int gpmc_nand_write(int cs, int cmd, int wval) -{ - int err = 0; - - switch (cmd) { - case GPMC_NAND_COMMAND: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval); - break; - - case GPMC_NAND_ADDRESS: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval); - break; - - case GPMC_NAND_DATA: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval); - - default: - printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n"); - err = -EINVAL; - } - return err; -} -EXPORT_SYMBOL(gpmc_nand_write); - - - -/** - * gpmc_prefetch_enable - configures and starts prefetch transfer - * @cs: cs (chip select) number - * @fifo_th: fifo threshold to be used for read/ write - * @dma_mode: dma mode enable (1) or disable (0) - * @u32_count: number of bytes to be transferred - * @is_write: prefetch read(0) or write post(1) mode - */ -int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write) -{ - - if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) { - pr_err("gpmc: fifo threshold is not supported\n"); - return -1; - } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { - /* Set the amount of bytes to be prefetched */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count); - - /* Set dma/mpu mode, the prefetch read / post write and - * enable the engine. Set which cs is has requested for. - */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) | - PREFETCH_FIFOTHRESHOLD(fifo_th) | - ENABLE_PREFETCH | - (dma_mode << DMA_MPU_MODE) | - (0x1 & is_write))); - - /* Start the prefetch engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); - } else { - return -EBUSY; - } - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_enable); - -/** - * gpmc_prefetch_reset - disables and stops the prefetch engine - */ -int gpmc_prefetch_reset(int cs) -{ - u32 config1; - - /* check if the same module/cs is trying to reset */ - config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); - if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs) - return -EINVAL; - - /* Stop the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0); - - /* Reset/disable the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0); - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_reset); - void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) { + int i; + reg->gpmc_status = gpmc_base + GPMC_STATUS; reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; @@ -744,7 +640,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; - reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0; + + for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) { + reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 + + GPMC_BCH_SIZE * i; + } } int gpmc_get_client_irq(unsigned irq_config) @@ -902,6 +808,319 @@ static int __devinit gpmc_mem_init(void) return 0; } +static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) +{ + u32 temp; + int div; + + div = gpmc_calc_divider(sync_clk); + temp = gpmc_ps_to_ticks(time_ps); + temp = (temp + div - 1) / div; + return gpmc_ticks_to_ps(temp * div); +} + +/* XXX: can the cycles be avoided ? */ +static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, + struct gpmc_device_timings *dev_t) +{ + bool mux = dev_t->mux; + u32 temp; + + /* adv_rd_off */ + temp = dev_t->t_avdp_r; + /* XXX: mux check required ? */ + if (mux) { + /* XXX: t_avdp not to be required for sync, only added for tusb + * this indirectly necessitates requirement of t_avdp_r and + * t_avdp_w instead of having a single t_avdp + */ + temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_avdh); + temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp); + } + gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp); + + /* oe_on */ + temp = dev_t->t_oeasu; /* XXX: remove this ? */ + if (mux) { + temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_ach); + temp = max_t(u32, temp, gpmc_t->adv_rd_off + + gpmc_ticks_to_ps(dev_t->cyc_aavdh_oe)); + } + gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp); + + /* access */ + /* XXX: any scope for improvement ?, by combining oe_on + * and clk_activation, need to check whether + * access = clk_activation + round to sync clk ? + */ + temp = max_t(u32, dev_t->t_iaa, dev_t->cyc_iaa * gpmc_t->sync_clk); + temp += gpmc_t->clk_activation; + if (dev_t->cyc_oe) + temp = max_t(u32, temp, gpmc_t->oe_on + + gpmc_ticks_to_ps(dev_t->cyc_oe)); + gpmc_t->access = gpmc_round_ps_to_ticks(temp); + + gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1); + gpmc_t->cs_rd_off = gpmc_t->oe_off; + + /* rd_cycle */ + temp = max_t(u32, dev_t->t_cez_r, dev_t->t_oez); + temp = gpmc_round_ps_to_sync_clk(temp, gpmc_t->sync_clk) + + gpmc_t->access; + /* XXX: barter t_ce_rdyz with t_cez_r ? */ + if (dev_t->t_ce_rdyz) + temp = max_t(u32, temp, gpmc_t->cs_rd_off + dev_t->t_ce_rdyz); + gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp); + + return 0; +} + +static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, + struct gpmc_device_timings *dev_t) +{ + bool mux = dev_t->mux; + u32 temp; + + /* adv_wr_off */ + temp = dev_t->t_avdp_w; + if (mux) { + temp = max_t(u32, temp, + gpmc_t->clk_activation + dev_t->t_avdh); + temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp); + } + gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp); + + /* wr_data_mux_bus */ + temp = max_t(u32, dev_t->t_weasu, + gpmc_t->clk_activation + dev_t->t_rdyo); + /* XXX: shouldn't mux be kept as a whole for wr_data_mux_bus ?, + * and in that case remember to handle we_on properly + */ + if (mux) { + temp = max_t(u32, temp, + gpmc_t->adv_wr_off + dev_t->t_aavdh); + temp = max_t(u32, temp, gpmc_t->adv_wr_off + + gpmc_ticks_to_ps(dev_t->cyc_aavdh_we)); + } + gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp); + + /* we_on */ + if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS) + gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu); + else + gpmc_t->we_on = gpmc_t->wr_data_mux_bus; + + /* wr_access */ + /* XXX: gpmc_capability check reqd ? , even if not, will not harm */ + gpmc_t->wr_access = gpmc_t->access; + + /* we_off */ + temp = gpmc_t->we_on + dev_t->t_wpl; + temp = max_t(u32, temp, + gpmc_t->wr_access + gpmc_ticks_to_ps(1)); + temp = max_t(u32, temp, + gpmc_t->we_on + gpmc_ticks_to_ps(dev_t->cyc_wpl)); + gpmc_t->we_off = gpmc_round_ps_to_ticks(temp); + + gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off + + dev_t->t_wph); + + /* wr_cycle */ + temp = gpmc_round_ps_to_sync_clk(dev_t->t_cez_w, gpmc_t->sync_clk); + temp += gpmc_t->wr_access; + /* XXX: barter t_ce_rdyz with t_cez_w ? */ + if (dev_t->t_ce_rdyz) + temp = max_t(u32, temp, + gpmc_t->cs_wr_off + dev_t->t_ce_rdyz); + gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp); + + return 0; +} + +static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, + struct gpmc_device_timings *dev_t) +{ + bool mux = dev_t->mux; + u32 temp; + + /* adv_rd_off */ + temp = dev_t->t_avdp_r; + if (mux) + temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp); + gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp); + + /* oe_on */ + temp = dev_t->t_oeasu; + if (mux) + temp = max_t(u32, temp, + gpmc_t->adv_rd_off + dev_t->t_aavdh); + gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp); + + /* access */ + temp = max_t(u32, dev_t->t_iaa, /* XXX: remove t_iaa in async ? */ + gpmc_t->oe_on + dev_t->t_oe); + temp = max_t(u32, temp, + gpmc_t->cs_on + dev_t->t_ce); + temp = max_t(u32, temp, + gpmc_t->adv_on + dev_t->t_aa); + gpmc_t->access = gpmc_round_ps_to_ticks(temp); + + gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1); + gpmc_t->cs_rd_off = gpmc_t->oe_off; + + /* rd_cycle */ + temp = max_t(u32, dev_t->t_rd_cycle, + gpmc_t->cs_rd_off + dev_t->t_cez_r); + temp = max_t(u32, temp, gpmc_t->oe_off + dev_t->t_oez); + gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp); + + return 0; +} + +static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t, + struct gpmc_device_timings *dev_t) +{ + bool mux = dev_t->mux; + u32 temp; + + /* adv_wr_off */ + temp = dev_t->t_avdp_w; + if (mux) + temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp); + gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp); + + /* wr_data_mux_bus */ + temp = dev_t->t_weasu; + if (mux) { + temp = max_t(u32, temp, gpmc_t->adv_wr_off + dev_t->t_aavdh); + temp = max_t(u32, temp, gpmc_t->adv_wr_off + + gpmc_ticks_to_ps(dev_t->cyc_aavdh_we)); + } + gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp); + + /* we_on */ + if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS) + gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu); + else + gpmc_t->we_on = gpmc_t->wr_data_mux_bus; + + /* we_off */ + temp = gpmc_t->we_on + dev_t->t_wpl; + gpmc_t->we_off = gpmc_round_ps_to_ticks(temp); + + gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off + + dev_t->t_wph); + + /* wr_cycle */ + temp = max_t(u32, dev_t->t_wr_cycle, + gpmc_t->cs_wr_off + dev_t->t_cez_w); + gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp); + + return 0; +} + +static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t, + struct gpmc_device_timings *dev_t) +{ + u32 temp; + + gpmc_t->sync_clk = gpmc_calc_divider(dev_t->clk) * + gpmc_get_fclk_period(); + + gpmc_t->page_burst_access = gpmc_round_ps_to_sync_clk( + dev_t->t_bacc, + gpmc_t->sync_clk); + + temp = max_t(u32, dev_t->t_ces, dev_t->t_avds); + gpmc_t->clk_activation = gpmc_round_ps_to_ticks(temp); + + if (gpmc_calc_divider(gpmc_t->sync_clk) != 1) + return 0; + + if (dev_t->ce_xdelay) + gpmc_t->bool_timings.cs_extra_delay = true; + if (dev_t->avd_xdelay) + gpmc_t->bool_timings.adv_extra_delay = true; + if (dev_t->oe_xdelay) + gpmc_t->bool_timings.oe_extra_delay = true; + if (dev_t->we_xdelay) + gpmc_t->bool_timings.we_extra_delay = true; + + return 0; +} + +static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, + struct gpmc_device_timings *dev_t) +{ + u32 temp; + + /* cs_on */ + gpmc_t->cs_on = gpmc_round_ps_to_ticks(dev_t->t_ceasu); + + /* adv_on */ + temp = dev_t->t_avdasu; + if (dev_t->t_ce_avd) + temp = max_t(u32, temp, + gpmc_t->cs_on + dev_t->t_ce_avd); + gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp); + + if (dev_t->sync_write || dev_t->sync_read) + gpmc_calc_sync_common_timings(gpmc_t, dev_t); + + return 0; +} + +/* TODO: remove this function once all peripherals are confirmed to + * work with generic timing. Simultaneously gpmc_cs_set_timings() + * has to be modified to handle timings in ps instead of ns +*/ +static void gpmc_convert_ps_to_ns(struct gpmc_timings *t) +{ + t->cs_on /= 1000; + t->cs_rd_off /= 1000; + t->cs_wr_off /= 1000; + t->adv_on /= 1000; + t->adv_rd_off /= 1000; + t->adv_wr_off /= 1000; + t->we_on /= 1000; + t->we_off /= 1000; + t->oe_on /= 1000; + t->oe_off /= 1000; + t->page_burst_access /= 1000; + t->access /= 1000; + t->rd_cycle /= 1000; + t->wr_cycle /= 1000; + t->bus_turnaround /= 1000; + t->cycle2cycle_delay /= 1000; + t->wait_monitoring /= 1000; + t->clk_activation /= 1000; + t->wr_access /= 1000; + t->wr_data_mux_bus /= 1000; +} + +int gpmc_calc_timings(struct gpmc_timings *gpmc_t, + struct gpmc_device_timings *dev_t) +{ + memset(gpmc_t, 0, sizeof(*gpmc_t)); + + gpmc_calc_common_timings(gpmc_t, dev_t); + + if (dev_t->sync_read) + gpmc_calc_sync_read_timings(gpmc_t, dev_t); + else + gpmc_calc_async_read_timings(gpmc_t, dev_t); + + if (dev_t->sync_write) + gpmc_calc_sync_write_timings(gpmc_t, dev_t); + else + gpmc_calc_async_write_timings(gpmc_t, dev_t); + + /* TODO: remove, see function definition */ + gpmc_convert_ps_to_ns(gpmc_t); + + return 0; +} + static __devinit int gpmc_probe(struct platform_device *pdev) { int rc; @@ -1093,267 +1312,3 @@ void omap3_gpmc_restore_context(void) } } #endif /* CONFIG_ARCH_OMAP3 */ - -/** - * gpmc_enable_hwecc - enable hardware ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @ecc_size: bytes for which ECC will be generated - */ -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) -{ - unsigned int val; - - /* check if ecc module is in used */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - - /* program ecc and result sizes */ - val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F)); - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val); - - switch (mode) { - case GPMC_ECC_READ: - case GPMC_ECC_WRITE: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - break; - case GPMC_ECC_READSYN: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCDISABLE); - break; - default: - printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode); - break; - } - - /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ - val = (dev_width << 7) | (cs << 1) | (0x1); - gpmc_write_reg(GPMC_ECC_CONFIG, val); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc); - -/** - * gpmc_calculate_ecc - generate non-inverted ecc bytes - * @cs: chip select number - * @dat: data pointer over which ecc is computed - * @ecc_code: ecc code buffer - * - * Using non-inverted ECC is considered ugly since writing a blank - * page (padding) will clear the ECC bytes. This is not a problem as long - * no one is trying to write data on the seemingly unused page. Reading - * an erased page will produce an ECC mismatch between generated and read - * ECC bytes that has to be dealt with separately. - */ -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) -{ - unsigned int val = 0x0; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - /* read ecc result */ - val = gpmc_read_reg(GPMC_ECC1_RESULT); - *ecc_code++ = val; /* P128e, ..., P1e */ - *ecc_code++ = val >> 16; /* P128o, ..., P1o */ - /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ - *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); - -#ifdef CONFIG_ARCH_OMAP3 - -/** - * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality - * @cs: chip select number - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - * - * This function must be executed before any call to gpmc_enable_hwecc_bch. - */ -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors) -{ - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - /* support only OMAP3 class */ - if (!cpu_is_omap34xx()) { - printk(KERN_ERR "BCH ecc is not supported on this CPU\n"); - return -EINVAL; - } - - /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. - * Other chips may be added if confirmed to work. - */ - if ((nerrors == 4) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { - printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n"); - return -EINVAL; - } - - /* sanity check */ - if (nsectors > 8) { - printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n", - nsectors); - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch); - -/** - * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - */ -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors) -{ - unsigned int val; - - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, 0x1); - - /* - * When using BCH, sector size is hardcoded to 512 bytes. - * Here we are using wrapping mode 6 both for reading and writing, with: - * size0 = 0 (no additional protected byte in spare area) - * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) - */ - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12)); - - /* BCH configuration */ - val = ((1 << 16) | /* enable BCH */ - (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ - (0x06 << 8) | /* wrap mode = 6 */ - (dev_width << 7) | /* bus width */ - (((nsectors-1) & 0x7) << 4) | /* number of sectors */ - (cs << 1) | /* ECC CS */ - (0x1)); /* enable ECC */ - - gpmc_write_reg(GPMC_ECC_CONFIG, val); - gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch); - -/** - * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs; and - * left-justify the resulting polynomial. - */ - *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF); - *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF); - *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); - *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF); - *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF); - *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF); - *ecc++ = 0x7f ^ ((val1 & 0xF) << 4); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4); - -/** - * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2, val3, val4; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - val3 = gpmc_read_reg(reg + 8); - val4 = gpmc_read_reg(reg + 12); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs. - */ - *ecc++ = 0xef ^ (val4 & 0xFF); - *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF); - *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF); - *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF); - *ecc++ = 0xed ^ (val3 & 0xFF); - *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF); - *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF); - *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF); - *ecc++ = 0x97 ^ (val2 & 0xFF); - *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF); - *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF); - *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF); - *ecc++ = 0xb5 ^ (val1 & 0xFF); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8); - -#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/mach-omap2/gpmc.h index 2e6e2597178c..fe0a844d5007 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -11,6 +11,8 @@ #ifndef __OMAP2_GPMC_H #define __OMAP2_GPMC_H +#include <linux/platform_data/mtd-nand-omap2.h> + /* Maximum Number of Chip Selects */ #define GPMC_CS_NUM 8 @@ -32,15 +34,6 @@ #define GPMC_SET_IRQ_STATUS 0x00000004 #define GPMC_CONFIG_WP 0x00000005 -#define GPMC_GET_IRQ_STATUS 0x00000006 -#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */ -#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/ -#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */ - -#define GPMC_NAND_COMMAND 0x0000000a -#define GPMC_NAND_ADDRESS 0x0000000b -#define GPMC_NAND_DATA 0x0000000c - #define GPMC_ENABLE_IRQ 0x0000000d /* ECC commands */ @@ -76,24 +69,20 @@ #define GPMC_DEVICETYPE_NOR 0 #define GPMC_DEVICETYPE_NAND 2 #define GPMC_CONFIG_WRITEPROTECT 0x00000010 -#define GPMC_STATUS_BUFF_EMPTY 0x00000001 #define WR_RD_PIN_MONITORING 0x00600000 -#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) -#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 -#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 -#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) - -enum omap_ecc { - /* 1-bit ecc: stored at end of spare area */ - OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ - OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at beginning of spare area as romcode */ - OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ - OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ - OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ + +/* bool type time settings */ +struct gpmc_bool_timings { + bool cycle2cyclediffcsen; + bool cycle2cyclesamecsen; + bool we_extra_delay; + bool oe_extra_delay; + bool adv_extra_delay; + bool cs_extra_delay; + bool time_para_granularity; }; /* @@ -105,50 +94,104 @@ struct gpmc_timings { u32 sync_clk; /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ - u16 cs_on; /* Assertion time */ - u16 cs_rd_off; /* Read deassertion time */ - u16 cs_wr_off; /* Write deassertion time */ + u32 cs_on; /* Assertion time */ + u32 cs_rd_off; /* Read deassertion time */ + u32 cs_wr_off; /* Write deassertion time */ /* ADV signal timings corresponding to GPMC_CONFIG3 */ - u16 adv_on; /* Assertion time */ - u16 adv_rd_off; /* Read deassertion time */ - u16 adv_wr_off; /* Write deassertion time */ + u32 adv_on; /* Assertion time */ + u32 adv_rd_off; /* Read deassertion time */ + u32 adv_wr_off; /* Write deassertion time */ /* WE signals timings corresponding to GPMC_CONFIG4 */ - u16 we_on; /* WE assertion time */ - u16 we_off; /* WE deassertion time */ + u32 we_on; /* WE assertion time */ + u32 we_off; /* WE deassertion time */ /* OE signals timings corresponding to GPMC_CONFIG4 */ - u16 oe_on; /* OE assertion time */ - u16 oe_off; /* OE deassertion time */ + u32 oe_on; /* OE assertion time */ + u32 oe_off; /* OE deassertion time */ /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ - u16 page_burst_access; /* Multiple access word delay */ - u16 access; /* Start-cycle to first data valid delay */ - u16 rd_cycle; /* Total read cycle time */ - u16 wr_cycle; /* Total write cycle time */ + u32 page_burst_access; /* Multiple access word delay */ + u32 access; /* Start-cycle to first data valid delay */ + u32 rd_cycle; /* Total read cycle time */ + u32 wr_cycle; /* Total write cycle time */ + + u32 bus_turnaround; + u32 cycle2cycle_delay; + + u32 wait_monitoring; + u32 clk_activation; /* The following are only on OMAP3430 */ - u16 wr_access; /* WRACCESSTIME */ - u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ + u32 wr_access; /* WRACCESSTIME */ + u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */ + + struct gpmc_bool_timings bool_timings; }; -struct gpmc_nand_regs { - void __iomem *gpmc_status; - void __iomem *gpmc_nand_command; - void __iomem *gpmc_nand_address; - void __iomem *gpmc_nand_data; - void __iomem *gpmc_prefetch_config1; - void __iomem *gpmc_prefetch_config2; - void __iomem *gpmc_prefetch_control; - void __iomem *gpmc_prefetch_status; - void __iomem *gpmc_ecc_config; - void __iomem *gpmc_ecc_control; - void __iomem *gpmc_ecc_size_config; - void __iomem *gpmc_ecc1_result; - void __iomem *gpmc_bch_result0; +/* Device timings in picoseconds */ +struct gpmc_device_timings { + u32 t_ceasu; /* address setup to CS valid */ + u32 t_avdasu; /* address setup to ADV valid */ + /* XXX: try to combine t_avdp_r & t_avdp_w. Issue is + * of tusb using these timings even for sync whilst + * ideally for adv_rd/(wr)_off it should have considered + * t_avdh instead. This indirectly necessitates r/w + * variations of t_avdp as it is possible to have one + * sync & other async + */ + u32 t_avdp_r; /* ADV low time (what about t_cer ?) */ + u32 t_avdp_w; + u32 t_aavdh; /* address hold time */ + u32 t_oeasu; /* address setup to OE valid */ + u32 t_aa; /* access time from ADV assertion */ + u32 t_iaa; /* initial access time */ + u32 t_oe; /* access time from OE assertion */ + u32 t_ce; /* access time from CS asertion */ + u32 t_rd_cycle; /* read cycle time */ + u32 t_cez_r; /* read CS deassertion to high Z */ + u32 t_cez_w; /* write CS deassertion to high Z */ + u32 t_oez; /* OE deassertion to high Z */ + u32 t_weasu; /* address setup to WE valid */ + u32 t_wpl; /* write assertion time */ + u32 t_wph; /* write deassertion time */ + u32 t_wr_cycle; /* write cycle time */ + + u32 clk; + u32 t_bacc; /* burst access valid clock to output delay */ + u32 t_ces; /* CS setup time to clk */ + u32 t_avds; /* ADV setup time to clk */ + u32 t_avdh; /* ADV hold time from clk */ + u32 t_ach; /* address hold time from clk */ + u32 t_rdyo; /* clk to ready valid */ + + u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */ + u32 t_ce_avd; /* CS on to ADV on delay */ + + /* XXX: check the possibility of combining + * cyc_aavhd_oe & cyc_aavdh_we + */ + u8 cyc_aavdh_oe;/* read address hold time in cycles */ + u8 cyc_aavdh_we;/* write address hold time in cycles */ + u8 cyc_oe; /* access time from OE assertion in cycles */ + u8 cyc_wpl; /* write deassertion time in cycles */ + u32 cyc_iaa; /* initial access time in cycles */ + + bool mux; /* address & data muxed */ + bool sync_write;/* synchronous write */ + bool sync_read; /* synchronous read */ + + /* extra delays */ + bool ce_xdelay; + bool avd_xdelay; + bool oe_xdelay; + bool we_xdelay; }; +extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t, + struct gpmc_device_timings *dev_t); + extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); extern int gpmc_get_client_irq(unsigned irq_config); @@ -160,31 +203,14 @@ extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); +extern int gpmc_calc_divider(unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); -extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write); -extern int gpmc_prefetch_reset(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern int gpmc_read_status(int cmd); extern int gpmc_cs_configure(int cs, int cmd, int wval); -extern int gpmc_nand_read(int cs, int cmd); -extern int gpmc_nand_write(int cs, int cmd, int wval); - -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); - -#ifdef CONFIG_ARCH_OMAP3 -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors); -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors); -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc); -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc); -#endif /* CONFIG_ARCH_OMAP3 */ #endif diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index e003f2bba30c..3da8900598c8 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -27,8 +27,8 @@ #include <linux/err.h> #include <linux/platform_device.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "hdq1w.h" #include "common.h" diff --git a/arch/arm/mach-omap2/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h index 0c1efc846d8d..c7e08d2a7a46 100644 --- a/arch/arm/mach-omap2/hdq1w.h +++ b/arch/arm/mach-omap2/hdq1w.h @@ -21,7 +21,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H #define ARCH_ARM_MACH_OMAP2_HDQ1W_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" /* * XXX A future cleanup patch should modify diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 4d3a6324155f..4a964338992a 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,14 +14,14 @@ #include <linux/string.h> #include <linux/delay.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/mmc.h> -#include <plat/omap-pm.h> -#include <plat/omap_device.h> +#include "soc.h" +#include "omap_device.h" +#include "omap-pm.h" #include "mux.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c index 8763c8520dc2..1df9b5feda16 100644 --- a/arch/arm/mach-omap2/hwspinlock.c +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -21,8 +21,8 @@ #include <linux/err.h> #include <linux/hwspinlock.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = { .base_id = 0, diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index fc57e67b321f..4e63097e3cd8 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -19,11 +19,13 @@ * */ -#include <plat/i2c.h> +#include "soc.h" #include "common.h" -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "mux.h" +#include "i2c.h" /* In register I2C_CON, Bit 15 is the I2C enable bit */ #define I2C_EN BIT(15) @@ -33,7 +35,9 @@ /* Maximum microseconds to wait for OMAP module to softreset */ #define MAX_MODULE_SOFTRESET_WAIT 10000 -void __init omap2_i2c_mux_pins(int bus_id) +#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 + +static void __init omap2_i2c_mux_pins(int bus_id) { char mux_name[sizeof("i2c2_scl.i2c2_scl")]; @@ -104,3 +108,62 @@ int omap_i2c_reset(struct omap_hwmod *oh) return 0; } + +static int __init omap_i2c_nr_ports(void) +{ + int ports = 0; + + if (cpu_is_omap24xx()) + ports = 2; + else if (cpu_is_omap34xx()) + ports = 3; + else if (cpu_is_omap44xx()) + ports = 4; + return ports; +} + +static const char name[] = "omap_i2c"; + +int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, + int bus_id) +{ + int l; + struct omap_hwmod *oh; + struct platform_device *pdev; + char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; + struct omap_i2c_bus_platform_data *pdata; + struct omap_i2c_dev_attr *dev_attr; + + if (bus_id > omap_i2c_nr_ports()) + return -EINVAL; + + omap2_i2c_mux_pins(bus_id); + + l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); + WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, + "String buffer overflow in I2C%d device setup\n", bus_id); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return -EEXIST; + } + + pdata = i2c_pdata; + /* + * pass the hwmod class's CPU-specific knowledge of I2C IP revision in + * use, and functionality implementation flags, up to the OMAP I2C + * driver via platform data + */ + pdata->rev = oh->class->rev; + + dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; + pdata->flags = dev_attr->flags; + + pdev = omap_device_build(name, bus_id, oh, pdata, + sizeof(struct omap_i2c_bus_platform_data), + NULL, 0, 0); + WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); + + return PTR_RET(pdev); +} + diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h new file mode 100644 index 000000000000..42b6f2e7d190 --- /dev/null +++ b/arch/arm/mach-omap2/i2c.h @@ -0,0 +1,42 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <plat/i2c.h> + +#ifndef __MACH_OMAP2_I2C_H +#define __MACH_OMAP2_I2C_H + +/** + * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod + * @fifo_depth: total controller FIFO size (in bytes) + * @flags: differences in hardware support capability + * + * @fifo_depth represents what exists on the hardware, not what is + * actually configured at runtime by the device driver. + */ +struct omap_i2c_dev_attr { + u8 fifo_depth; + u32 flags; +}; + +int omap_i2c_reset(struct omap_hwmod *oh); + +#endif /* __MACH_OMAP2_I2C_H */ diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 93d10de7129f..cfaed13d0040 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <plat/serial.h> +#include <mach/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h deleted file mode 100644 index 5621cc59c9f4..000000000000 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/gpio.h - */ diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/mach-omap2/include/mach/serial.h index 65fce44dce34..70eda00db7a4 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/mach-omap2/include/mach/serial.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/serial.h - * * Copyright (C) 2009 Texas Instruments * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> * @@ -10,11 +8,6 @@ * GNU General Public License for more details. */ -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include <linux/init.h> - /* * Memory entry used for the DEBUG_LL UART configuration, relative to * start of RAM. See also uncompress.h and debug-macro.S. @@ -29,11 +22,6 @@ */ #define OMAP_UART_INFO_OFS 0x3ffc -/* OMAP1 serial ports */ -#define OMAP1_UART1_BASE 0xfffb0000 -#define OMAP1_UART2_BASE 0xfffb0800 -#define OMAP1_UART3_BASE 0xfffb9800 - /* OMAP2 serial ports */ #define OMAP2_UART1_BASE 0x4806a000 #define OMAP2_UART2_BASE 0x4806c000 @@ -76,20 +64,14 @@ #define ZOOM_UART_VIRT 0xfa400000 #define OMAP_PORT_SHIFT 2 -#define OMAP7XX_PORT_SHIFT 0 #define ZOOM_PORT_SHIFT 1 -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) #define OMAP24XX_BASE_BAUD (48000000/16) /* * DEBUG_LL port encoding stored into the UART1 scratchpad register by * decomp_setup in uncompress.h */ -#define OMAP1UART1 11 -#define OMAP1UART2 12 -#define OMAP1UART3 13 #define OMAP2UART1 21 #define OMAP2UART2 22 #define OMAP2UART3 23 @@ -109,15 +91,6 @@ #define OMAP5UART4 OMAP4UART4 #define ZOOM_UART 95 /* Only on zoom2/3 */ -/* This is only used by 8250.c for omap1510 */ -#define is_omap_port(pt) ({int __ret = 0; \ - if ((pt)->port.mapbase == OMAP1_UART1_BASE || \ - (pt)->port.mapbase == OMAP1_UART2_BASE || \ - (pt)->port.mapbase == OMAP1_UART3_BASE) \ - __ret = 1; \ - __ret; \ - }) - #ifndef __ASSEMBLER__ struct omap_board_data; @@ -128,5 +101,3 @@ extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); extern void omap_serial_init_port(struct omap_board_data *bdata, struct omap_uart_port_info *platform_data); #endif - -#endif diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h index 78e0557bfd4e..8e3546d3e041 100644 --- a/arch/arm/mach-omap2/include/mach/uncompress.h +++ b/arch/arm/mach-omap2/include/mach/uncompress.h @@ -1,5 +1,176 @@ /* - * arch/arm/mach-omap2/include/mach/uncompress.h + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ -#include <plat/uncompress.h> +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/memory.h> +#include <asm/mach-types.h> + +#include <mach/serial.h> + +#define MDR1_MODE_MASK 0x07 + +volatile u8 *uart_base; +int uart_shift; + +/* + * Store the DEBUG_LL uart number into memory. + * See also debug-macro.S, and serial.c for related code. + */ +static void set_omap_uart_info(unsigned char port) +{ + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; +} + +static void putc(int c) +{ + if (!uart_base) + return; + + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) + barrier(); + uart_base[UART_TX << uart_shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * Macros to configure UART1 and debug UART + */ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ + if (machine_is_##mach()) { \ + uart_base = (volatile u8 *)(dbg_uart); \ + uart_shift = (dbg_shft); \ + port = (dbg_id); \ + set_omap_uart_info(port); \ + break; \ + } + +#define DEBUG_LL_OMAP2(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP2UART##p) + +#define DEBUG_LL_OMAP3(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP3UART##p) + +#define DEBUG_LL_OMAP4(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP4UART##p) + +#define DEBUG_LL_OMAP5(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP5UART##p) +/* Zoom2/3 shift is different for UART1 and external port */ +#define DEBUG_LL_ZOOM(mach) \ + _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) + +#define DEBUG_LL_TI81XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + TI81XXUART##p) + +#define DEBUG_LL_AM33XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + AM33XXUART##p) + +static inline void arch_decomp_setup(void) +{ + int port = 0; + + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* omap2 based boards using UART1 */ + DEBUG_LL_OMAP2(1, omap_2430sdp); + DEBUG_LL_OMAP2(1, omap_apollon); + DEBUG_LL_OMAP2(1, omap_h4); + + /* omap2 based boards using UART3 */ + DEBUG_LL_OMAP2(3, nokia_n800); + DEBUG_LL_OMAP2(3, nokia_n810); + DEBUG_LL_OMAP2(3, nokia_n810_wimax); + + /* omap3 based boards using UART1 */ + DEBUG_LL_OMAP2(1, omap3evm); + DEBUG_LL_OMAP3(1, omap_3430sdp); + DEBUG_LL_OMAP3(1, omap_3630sdp); + DEBUG_LL_OMAP3(1, omap3530_lv_som); + DEBUG_LL_OMAP3(1, omap3_torpedo); + + /* omap3 based boards using UART3 */ + DEBUG_LL_OMAP3(3, cm_t35); + DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, cm_t3730); + DEBUG_LL_OMAP3(3, craneboard); + DEBUG_LL_OMAP3(3, devkit8000); + DEBUG_LL_OMAP3(3, igep0020); + DEBUG_LL_OMAP3(3, igep0030); + DEBUG_LL_OMAP3(3, nokia_rm680); + DEBUG_LL_OMAP3(3, nokia_rm696); + DEBUG_LL_OMAP3(3, nokia_rx51); + DEBUG_LL_OMAP3(3, omap3517evm); + DEBUG_LL_OMAP3(3, omap3_beagle); + DEBUG_LL_OMAP3(3, omap3_pandora); + DEBUG_LL_OMAP3(3, omap_ldp); + DEBUG_LL_OMAP3(3, overo); + DEBUG_LL_OMAP3(3, touchbook); + + /* omap4 based boards using UART3 */ + DEBUG_LL_OMAP4(3, omap_4430sdp); + DEBUG_LL_OMAP4(3, omap4_panda); + + /* omap5 based boards using UART3 */ + DEBUG_LL_OMAP5(3, omap5_sevm); + + /* zoom2/3 external uart */ + DEBUG_LL_ZOOM(omap_zoom2); + DEBUG_LL_ZOOM(omap_zoom3); + + /* TI8168 base boards using UART3 */ + DEBUG_LL_TI81XX(3, ti8168evm); + + /* TI8148 base boards using UART1 */ + DEBUG_LL_TI81XX(1, ti8148evm); + + /* AM33XX base boards using UART1 */ + DEBUG_LL_AM33XX(1, am335xevm); + } while (0); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4234d28dc171..807b8d919f81 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -25,14 +25,9 @@ #include <asm/tlb.h> #include <asm/mach/map.h> -#include <plat/sram.h> -#include <plat/sdrc.h> -#include <plat/serial.h> -#include <plat/omap-pm.h> -#include <plat/omap_hwmod.h> -#include <plat/multi.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> +#include "omap_hwmod.h" #include "soc.h" #include "iomap.h" #include "voltage.h" @@ -43,6 +38,10 @@ #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" +#include "omap-pm.h" +#include "sdrc.h" +#include "serial.h" +#include "sram.h" /* * The machine specific code may provide the extra mapping besides the @@ -354,11 +353,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -static void __init omap_common_init_early(void) -{ - omap_init_consistent_dma_size(); -} - static void __init omap_hwmod_init_postsetup(void) { u8 postsetup_state; @@ -379,7 +373,6 @@ void __init omap2420_init_early(void) { omap2_set_globals_242x(); omap2xxx_check_revision(); - omap_common_init_early(); omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); omap242x_clockdomains_init(); @@ -401,7 +394,6 @@ void __init omap2430_init_early(void) { omap2_set_globals_243x(); omap2xxx_check_revision(); - omap_common_init_early(); omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); omap243x_clockdomains_init(); @@ -428,7 +420,6 @@ void __init omap3_init_early(void) omap2_set_globals_3xxx(); omap3xxx_check_revision(); omap3xxx_check_features(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -462,7 +453,6 @@ void __init ti81xx_init_early(void) omap2_set_globals_ti81xx(); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -520,7 +510,6 @@ void __init am33xx_init_early(void) omap2_set_globals_am33xx(); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); am33xx_voltagedomains_init(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); @@ -536,7 +525,6 @@ void __init omap4430_init_early(void) omap2_set_globals_443x(); omap4xxx_check_revision(); omap4xxx_check_features(); - omap_common_init_early(); omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); @@ -558,7 +546,6 @@ void __init omap5_init_early(void) { omap2_set_globals_5xxx(); omap5xxx_check_revision(); - omap_common_init_early(); } #endif diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 37f8f948047b..a106c75c5338 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -19,11 +19,12 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/platform_data/asoc-ti-mcbsp.h> - -#include <plat/dma.h> -#include <plat/omap_device.h> #include <linux/pm_runtime.h> +#include <plat-omap/dma-omap.h> + +#include "omap_device.h" + /* * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. * Sidetone needs non-gated ICLK and sidetone autoidle is broken. diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h new file mode 100644 index 000000000000..0cd4b089da9c --- /dev/null +++ b/arch/arm/mach-omap2/mmc.h @@ -0,0 +1,23 @@ +#include <linux/mmc/host.h> +#include <linux/platform_data/mmc-omap.h> + +#define OMAP24XX_NR_MMC 2 +#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE +#define OMAP2_MMC1_BASE 0x4809c000 + +#define OMAP4_MMC_REG_OFFSET 0x100 + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); +#else +static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) +{ +} +#endif + +struct omap_hwmod; +int omap_msdi_reset(struct omap_hwmod *oh); + +/* called from board-specific card detection service routine */ +extern void omap_mmc_notify_cover_event(struct device *dev, int slot, + int is_closed); diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index 9e57b4aadb06..627e97e30743 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -25,13 +25,12 @@ #include <linux/err.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/mmc.h> - #include "common.h" #include "control.h" +#include "omap_hwmod.h" +#include "omap_device.h" #include "mux.h" +#include "mmc.h" /* * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 701e17cba468..26126343d6ac 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -36,8 +36,9 @@ #include <linux/interrupt.h> -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" +#include "soc.h" #include "control.h" #include "mux.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 17f80e4ab162..c47140bbbec4 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -614,16 +614,16 @@ static struct omap_mux __initdata omap3_muxmodes[] = { "sys_off_mode", NULL, NULL, NULL, "gpio_9", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_CTS, 150, - "uart1_cts", NULL, NULL, NULL, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RTS, 149, - "uart1_rts", NULL, NULL, NULL, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, "gpio_149", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RX, 151, - "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", "gpio_151", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_TX, 148, - "uart1_tx", NULL, NULL, NULL, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, "gpio_148", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART2_CTS, 144, "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index ff4e6a0e9c7c..3f5fd7e3549d 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -50,6 +50,7 @@ #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> +#include "soc.h" #include "common.h" #include "omap44xx.h" #include "omap4-sar-layout.h" diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c index 9722f418ae1f..6a3be2bebddb 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/mach-omap2/omap-pm-noop.c @@ -22,9 +22,8 @@ #include <linux/device.h> #include <linux/platform_device.h> -/* Interface documentation is in mach/omap-pm.h */ -#include <plat/omap-pm.h> -#include <plat/omap_device.h> +#include "omap_device.h" +#include "omap-pm.h" static bool off_mode_enabled; static int dummy_context_loss_counter; diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h index 67faa7b8fe92..67faa7b8fe92 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/mach-omap2/omap-pm.h diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index e089e4d1ae38..b970440cffca 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -18,7 +18,6 @@ #include <asm/cacheflush.h> #include <asm/memblock.h> -#include <plat/omap-secure.h> #include "omap-secure.h" static phys_addr_t omap_secure_memblock_base; diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index c90a43589abe..0e729170c46b 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -52,6 +52,13 @@ extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2, u32 arg3, u32 arg4); extern u32 omap_smc2(u32 id, u32 falg, u32 pargs); extern phys_addr_t omap_secure_ram_mempool_base(void); +extern int omap_secure_ram_reserve_memblock(void); +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __ASSEMBLER__ */ #endif /* OMAP_ARCH_OMAP_SECURE_H */ diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index e1f289748c5d..3cfcd41bf8fa 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -25,16 +25,14 @@ #include <asm/mach/map.h> #include <asm/memblock.h> -#include <plat/sram.h> -#include <plat/omap-secure.h> -#include <plat/mmc.h> - #include "omap-wakeupgen.h" - #include "soc.h" #include "common.h" +#include "mmc.h" #include "hsmmc.h" #include "omap4-sar-layout.h" +#include "omap-secure.h" +#include "sram.h" #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 7a7d1f2a65e9..0ef934fec364 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -89,9 +89,8 @@ #include <linux/of.h> #include <linux/notifier.h> -#include <plat/omap_device.h> -#include <plat/omap_hwmod.h> -#include <plat/clock.h> +#include "omap_device.h" +#include "omap_hwmod.h" /* These parameters are passed to _omap_device_{de,}activate() */ #define USE_WAKEUP_LAT 0 diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/mach-omap2/omap_device.h index 106f50665804..0933c599bf89 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/mach-omap2/omap_device.h @@ -34,7 +34,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" extern struct dev_pm_domain omap_device_pm_domain; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b969ab1d258b..87eee3b62a3c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -139,8 +139,8 @@ #include <linux/slab.h> #include <linux/bootmem.h> -#include <plat/clock.h> -#include <plat/omap_hwmod.h> +#include "clock.h" +#include "omap_hwmod.h" #include <plat/prcm.h> #include "soc.h" diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index b3349f7b1a2c..87b59b45c678 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -35,7 +35,6 @@ #include <linux/list.h> #include <linux/ioport.h> #include <linux/spinlock.h> -#include <plat/cpu.h> struct omap_device; diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index b5db6007c523..a8b3368dca3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -12,21 +12,24 @@ * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ + +#include <linux/i2c-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/omap_hwmod.h> -#include <plat/dma.h> -#include <plat/serial.h> -#include <plat/i2c.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> + +#include "omap_hwmod.h" #include "l3_2xxx.h" #include "l4_2xxx.h" -#include <plat/mmc.h> #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" +#include "i2c.h" +#include "mmc.h" +#include "serial.h" #include "wd_timer.h" /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c455e41b0237..dc768c50e523 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -12,21 +12,23 @@ * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ + +#include <linux/i2c-omap.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/omap_hwmod.h> -#include <plat/dma.h> -#include <plat/serial.h> -#include <plat/i2c.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> -#include <plat/mmc.h> + +#include "omap_hwmod.h" +#include "mmc.h" #include "l3_2xxx.h" #include "soc.h" #include "omap_hwmod_common_data.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" +#include "i2c.h" #include "wd_timer.h" /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c index cbb4ef6544ad..0413daba2dba 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c @@ -13,8 +13,7 @@ */ #include <asm/sizes.h> -#include <plat/omap_hwmod.h> -#include <plat/serial.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 8851bbb6bb24..40d6c93d9853 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -9,13 +9,14 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <plat/omap_hwmod.h> -#include <plat/serial.h> -#include <plat/dma.h> -#include <plat/common.h> + +#include <plat-omap/dma-omap.h> + +#include "omap_hwmod.h" #include "hdq1w.h" #include "omap_hwmod_common_data.h" +#include "dma.h" /* UART */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 1a1287d62648..47901a5e76de 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -13,10 +13,10 @@ */ #include <asm/sizes.h> -#include <plat/omap_hwmod.h> -#include <plat/serial.h> +#include "omap_hwmod.h" #include "l3_2xxx.h" #include "l4_2xxx.h" +#include "serial.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index bd9220ed5ab9..0db8f450bad9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -8,13 +8,13 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <plat/omap_hwmod.h> -#include <plat/serial.h> + #include <linux/platform_data/gpio-omap.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" @@ -58,8 +58,9 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -268,6 +269,7 @@ struct omap_hwmod omap2xxx_timer1_hwmod = { }, .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -286,6 +288,7 @@ struct omap_hwmod omap2xxx_timer2_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -304,6 +307,7 @@ struct omap_hwmod omap2xxx_timer3_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -322,6 +326,7 @@ struct omap_hwmod omap2xxx_timer4_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -341,6 +346,7 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -360,6 +366,7 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -379,6 +386,7 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -398,6 +406,7 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -417,6 +426,7 @@ struct omap_hwmod omap2xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -436,6 +446,7 @@ struct omap_hwmod omap2xxx_timer10_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -455,6 +466,7 @@ struct omap_hwmod omap2xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -474,6 +486,7 @@ struct omap_hwmod omap2xxx_timer12_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* wd_timer2 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 59d5c1cd316d..ad8d43b33273 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -14,13 +14,11 @@ * GNU General Public License for more details. */ -#include <plat/omap_hwmod.h> -#include <plat/cpu.h> +#include <linux/i2c-omap.h> + +#include "omap_hwmod.h" #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/dma.h> -#include <plat/mmc.h> -#include <plat/i2c.h> #include "omap_hwmod_common_data.h" @@ -28,6 +26,8 @@ #include "cm33xx.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" +#include "i2c.h" +#include "mmc.h" /* * IP blocks diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f67b7ee07dd4..addc1c24ca2e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -14,16 +14,14 @@ * * XXX these should be marked initdata for multi-OMAP kernels */ + +#include <linux/i2c-omap.h> #include <linux/power/smartreflex.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/dma.h> -#include <plat/serial.h> +#include <plat-omap/dma-omap.h> #include "l3_3xxx.h" #include "l4_3xxx.h" -#include <plat/i2c.h> -#include <plat/mmc.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <plat/dmtimer.h> @@ -32,10 +30,16 @@ #include "am35xx.h" #include "soc.h" +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" + +#include "dma.h" +#include "i2c.h" +#include "mmc.h" #include "wd_timer.h" +#include "serial.h" /* * OMAP3xxx hardware module integration data @@ -149,29 +153,16 @@ static struct omap_hwmod omap3xxx_debugss_hwmod = { }; /* timer class */ -static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = { - .name = "timer", - .sysc = &omap3xxx_timer_1ms_sysc, -}; - static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -220,7 +211,8 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -237,7 +229,8 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, }, }, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -255,6 +248,7 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -272,6 +266,7 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -290,6 +285,7 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -308,6 +304,7 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -326,6 +323,7 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -344,6 +342,7 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -362,6 +361,7 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -379,7 +379,8 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -398,6 +399,7 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -421,6 +423,7 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = { }, .dev_attr = &capability_secure_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 652d0285bd6d..399f4ce9cab1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -21,22 +21,23 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> +#include <linux/i2c-omap.h> + +#include <plat-omap/dma-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/i2c.h> -#include <plat/dma.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <plat/mmc.h> #include <plat/dmtimer.h> -#include <plat/common.h> #include <plat/iommu.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "cm1_44xx.h" #include "cm2_44xx.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" +#include "i2c.h" +#include "mmc.h" #include "wd_timer.h" /* Base offset for all OMAP4 interrupts external to MPUSS */ @@ -3066,6 +3067,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = { SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -3119,6 +3121,7 @@ static struct omap_hwmod omap44xx_timer1_hwmod = { .name = "timer1", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer1_irqs, .main_clk = "timer1_fck", .prcm = { @@ -3141,6 +3144,7 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { .name = "timer2", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer2_irqs, .main_clk = "timer2_fck", .prcm = { @@ -3315,6 +3319,7 @@ static struct omap_hwmod omap44xx_timer10_hwmod = { .name = "timer10", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer10_irqs, .main_clk = "timer10_fck", .prcm = { diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 9f1ccdc8cc8c..79d623b83e49 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -16,7 +16,7 @@ * data and their integration with other OMAP modules and Linux. */ -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 2bc8f1705d4a..cfcce299177c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -13,7 +13,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H #define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "common.h" #include "display.h" diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h index c784c12f98a1..7e437bf6024c 100644 --- a/arch/arm/mach-omap2/omap_opp_data.h +++ b/arch/arm/mach-omap2/omap_opp_data.h @@ -19,7 +19,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H #define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "voltage.h" diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index d992db8ff0b0..4d76a3ca5bf3 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -27,11 +27,11 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/usb.h> - -#include <plat/usb.h> +#include <linux/usb/musb.h> #include "soc.h" #include "control.h" +#include "usb.h" void am35x_musb_reset(void) { diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index f515a1a056d5..2bf35dc091be 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/i2c/twl.h> +#include "soc.h" #include "voltage.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 58e16aef40bb..bd41d59a7cab 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -20,7 +20,7 @@ #include <linux/opp.h> #include <linux/cpu.h> -#include <plat/omap_device.h> +#include "omap_device.h" #include "omap_opp_data.h" diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index 75cef5f67a8a..62772e0e0d69 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -19,6 +19,7 @@ */ #include <linux/module.h> +#include "soc.h" #include "control.h" #include "omap_opp_data.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 46092cd806fa..3cf4fdfd7ab0 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -27,12 +27,13 @@ #include <linux/module.h> #include <linux/slab.h> -#include <plat/clock.h> +#include "clock.h" #include "powerdomain.h" #include "clockdomain.h" #include <plat/dmtimer.h> -#include <plat/omap-pm.h> +#include "omap-pm.h" +#include "soc.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index ea61c32957bd..331478f9b864 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -20,10 +20,11 @@ #include <asm/system_misc.h> -#include <plat/omap-pm.h> -#include <plat/omap_device.h> +#include "omap-pm.h" +#include "omap_device.h" #include "common.h" +#include "soc.h" #include "prcm-common.h" #include "voltage.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 686137d164da..67d66131cfa7 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -91,6 +91,7 @@ extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) +#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) extern u16 pm34xx_errata; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 8af6cd6ac331..9a2f5594a7dc 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -31,21 +31,24 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <asm/fncpy.h> + #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> #include <asm/system_misc.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> +#include "soc.h" #include "common.h" +#include "clock.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" #include "pm.h" #include "control.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ba670db1fd37..11f9669eb7ed 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -32,25 +32,26 @@ #include <trace/events/power.h> +#include <asm/fncpy.h> #include <asm/suspend.h> #include <asm/system_misc.h> -#include <plat/sram.h> #include "clockdomain.h" #include "powerdomain.h" -#include <plat/sdrc.h> #include <plat/prcm.h> -#include <plat/gpmc.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> +#include "soc.h" #include "common.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" +#include "gpmc.h" #include "prm-regbits-34xx.h" #include "prm2xxx_3xxx.h" #include "pm.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* pm34xx errata defined in pm.h */ @@ -652,14 +653,17 @@ static void __init pm_errata_configure(void) /* Enable the l2 cache toggling in sleep logic */ enable_omap3630_toggle_l2_on_restore(); if (omap_rev() < OMAP3630_REV_ES1_2) - pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583; + pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 | + PM_PER_MEMORIES_ERRATUM_i582); + } else if (cpu_is_omap34xx()) { + pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582; } } int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; - struct clockdomain *neon_clkdm, *mpu_clkdm; + struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm; int ret; if (!omap3_has_io_chain_ctrl()) @@ -711,6 +715,8 @@ int __init omap3_pm_init(void) neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); + per_clkdm = clkdm_lookup("per_clkdm"); + wkup_clkdm = clkdm_lookup("wkup_clkdm"); #ifdef CONFIG_SUSPEND omap_pm_suspend = omap3_pm_suspend; @@ -727,6 +733,27 @@ int __init omap3_pm_init(void) if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608)) omap3630_ctrl_disable_rta(); + /* + * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are + * not correctly reset when the PER powerdomain comes back + * from OFF or OSWR when the CORE powerdomain is kept active. + * See OMAP36xx Erratum i582 "PER Domain reset issue after + * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a + * complete workaround. The kernel must also prevent the PER + * powerdomain from going to OSWR/OFF while the CORE + * powerdomain is not going to OSWR/OFF. And if PER last + * power state was off while CORE last power state was ON, the + * UART3/4 and McBSP2/3 SIDETONE devices need to run a + * self-test using their loopback tests; if that fails, those + * devices are unusable until the PER/CORE can complete a transition + * from ON to OSWR/OFF and then back to ON. + * + * XXX Technically this workaround is only needed if off-mode + * or OSWR is enabled. + */ + if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582)) + clkdm_add_wkdep(per_clkdm, wkup_clkdm); + clkdm_add_wkdep(neon_clkdm, mpu_clkdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 04922d149068..7da75aed1514 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -18,6 +18,7 @@ #include <linux/slab.h> #include <asm/system_misc.h> +#include "soc.h" #include "common.h" #include "clockdomain.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 2a791766283d..3cf79b54ce61 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -15,8 +15,9 @@ #include <asm/pmu.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "soc.h" +#include "omap_hwmod.h" +#include "omap_device.h" static char *omap2_pmu_oh_names[] = {"mpu"}; static char *omap3_pmu_oh_names[] = {"mpu", "debugss"}; diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index baee90608d11..5277d56eb37f 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -22,8 +22,6 @@ #include <linux/atomic.h> -#include <plat/cpu.h> - #include "voltage.h" /* Powerdomain basic power states */ diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c index 2385c1f009ee..ba520d4f7c7b 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include "soc.h" #include "powerdomain.h" #include "powerdomains2xxx_3xxx_data.h" diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 0f51e034e0aa..cff270a178c5 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -28,6 +28,7 @@ #include "common.h" #include <plat/prcm.h> +#include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index e7dbb6cf1255..0d8abb577669 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -19,8 +19,6 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> - #include "common.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 6b4d332be2f6..3442227d3f0b 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,7 +24,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include <plat/common.h> #include <plat/prcm.h> #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h index 8bfaf342a028..1ee58c281a31 100644 --- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h +++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM #define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM -#include <plat/sdrc.h> +#include "sdrc.h" /* Hynix H8MBX00U0MER-0EM */ static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h index a391b4939f74..85cccc004c06 100644 --- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF -#include <plat/sdrc.h> +#include "sdrc.h" /* Micron MT46H32M32LF-6 */ /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c index 845c4fd2b125..0fa7ffa9b5ed 100644 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ b/arch/arm/mach-omap2/sdram-nokia.c @@ -18,10 +18,8 @@ #include <linux/io.h> #include "common.h" -#include <plat/clock.h> -#include <plat/sdrc.h> - #include "sdram-nokia.h" +#include "sdrc.h" /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */ struct sdram_timings { diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h index cd4352917022..003f7bf4e2e3 100644 --- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h +++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM #define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM -#include <plat/sdrc.h> +#include "sdrc.h" /* Numonyx M65KXXXXAM */ static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h index 0e518a72831f..8dc3de5ebb5b 100644 --- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 -#include <plat/sdrc.h> +#include "sdrc.h" /* Qimonda HYB18M512160AF-6 */ static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index e3d345f46409..c64ee1904be8 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -24,10 +24,7 @@ #include <linux/io.h> #include "common.h" -#include <plat/clock.h> -#include <plat/sram.h> - -#include <plat/sdrc.h> +#include "clock.h" #include "sdrc.h" static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; @@ -160,19 +157,3 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_write_reg(l, SDRC_POWER); omap2_sms_save_context(); } - -void omap2_sms_write_rot_control(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_CONTROL(ctx)); -} - -void omap2_sms_write_rot_size(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_SIZE(ctx)); -} - -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); -} - diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index b3f83799e6cf..69c4b329452e 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -2,12 +2,14 @@ #define __ARCH_ARM_MACH_OMAP2_SDRC_H /* - * OMAP2 SDRC register definitions + * OMAP2/3 SDRC/SMS macros and prototypes * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation * - * Written by Paul Walmsley + * Paul Walmsley + * Tony Lindgren + * Richard Woodruff * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,8 +17,6 @@ */ #undef DEBUG -#include <plat/sdrc.h> - #ifndef __ASSEMBLER__ #include <linux/io.h> @@ -50,6 +50,58 @@ static inline u32 sms_read_reg(u16 reg) { return __raw_readl(OMAP_SMS_REGADDR(reg)); } + + +/** + * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate + * @rate: SDRC clock rate (in Hz) + * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate + * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate + * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate + * @mr: Value to program to SDRC_MR for this rate + * + * This structure holds a pre-computed set of register values for the + * SDRC for a given SDRC clock rate and SDRAM chip. These are + * intended to be pre-computed and specified in an array in the board-*.c + * files. The structure is keyed off the 'rate' field. + */ +struct omap_sdrc_params { + unsigned long rate; + u32 actim_ctrla; + u32 actim_ctrlb; + u32 rfr_ctrl; + u32 mr; +}; + +#ifdef CONFIG_SOC_HAS_OMAP2_SDRC +void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +#else +static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) {}; +#endif + +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); +void omap2_sms_save_context(void); +void omap2_sms_restore_context(void); + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); +struct omap_sdrc_params *rx51_get_sdram_timings(void); + +u32 omap2xxx_sdrc_dll_is_unlocked(void); +u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); + + #else #define OMAP242X_SDRC_REGADDR(reg) \ OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) @@ -57,6 +109,7 @@ static inline u32 sms_read_reg(u16 reg) OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) #define OMAP34XX_SDRC_REGADDR(reg) \ OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) + #endif /* __ASSEMBLER__ */ /* Minimum frequency that the SDRC DLL can lock at */ @@ -74,4 +127,85 @@ static inline u32 sms_read_reg(u16 reg) */ #define SDRC_MPURATE_LOOPS 96 +/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ + +#define SDRC_SYSCONFIG 0x010 +#define SDRC_CS_CFG 0x040 +#define SDRC_SHARING 0x044 +#define SDRC_ERR_TYPE 0x04C +#define SDRC_DLLA_CTRL 0x060 +#define SDRC_DLLA_STATUS 0x064 +#define SDRC_DLLB_CTRL 0x068 +#define SDRC_DLLB_STATUS 0x06C +#define SDRC_POWER 0x070 +#define SDRC_MCFG_0 0x080 +#define SDRC_MR_0 0x084 +#define SDRC_EMR2_0 0x08c +#define SDRC_ACTIM_CTRL_A_0 0x09c +#define SDRC_ACTIM_CTRL_B_0 0x0a0 +#define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MANUAL_0 0x0a8 +#define SDRC_MCFG_1 0x0B0 +#define SDRC_MR_1 0x0B4 +#define SDRC_EMR2_1 0x0BC +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 +#define SDRC_MANUAL_1 0x0D8 + +#define SDRC_POWER_AUTOCOUNT_SHIFT 8 +#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) +#define SDRC_POWER_CLKCTRL_SHIFT 4 +#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) +#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) + +/* + * These values represent the number of memory clock cycles between + * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 + * rows per device, and include a subtraction of a 50 cycle window in the + * event that the autorefresh command is delayed due to other SDRC activity. + * The '| 1' sets the ARE field to send one autorefresh when the autorefresh + * counter reaches 0. + * + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the opposite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) +#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + + +/* + * SMS register access + */ + +#define OMAP242X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) + +/* SMS register offsets - read/write with sms_{read,write}_reg() */ + +#define SMS_SYSCONFIG 0x010 +/* REVISIT: fill in other SMS registers here */ + + + #endif diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 73e55e485329..20cc950db4de 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,16 +24,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "soc.h" #include "iomap.h" #include "common.h" #include "prm2xxx_3xxx.h" #include "clock.h" #include "sdrc.h" +#include "sram.h" /* Memory timing, DLL mode flags */ #define M_DDR 1 diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0405c8190803..aa30a3c20883 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -28,19 +28,20 @@ #include <linux/console.h> #include <plat/omap-serial.h> -#include "common.h" -#include <plat/dma.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> -#include <plat/serial.h> +#include <plat-omap/dma-omap.h> +#include "common.h" +#include "omap_hwmod.h" +#include "omap_device.h" +#include "omap-pm.h" +#include "soc.h" #include "prm2xxx_3xxx.h" #include "pm.h" #include "cm2xxx_3xxx.h" #include "prm-regbits-34xx.h" #include "control.h" #include "mux.h" +#include "serial.h" /* * NOTE: By default the serial auto_suspend timeout is disabled as it causes @@ -329,6 +330,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); + if (console_uart_id == bdata->id) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + oh->dev_attr = uart; if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h new file mode 100644 index 000000000000..c4014f013df0 --- /dev/null +++ b/arch/arm/mach-omap2/serial.h @@ -0,0 +1 @@ +#include <mach/serial.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 506987979c1c..7046c3c67181 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -26,13 +26,12 @@ #include <asm/assembler.h> -#include <plat/sram.h> - #include "omap34xx.h" #include "iomap.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index fc9b96daf851..070096496e20 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -1,7 +1,473 @@ -#include <plat/cpu.h> +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + #include "omap24xx.h" #include "omap34xx.h" #include "omap44xx.h" #include "ti81xx.h" #include "am33xx.h" #include "omap54xx.h" + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP2 +#undef OMAP_NAME + +#ifdef CONFIG_SOC_OMAP2420 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2420 +# endif +#endif +#ifdef CONFIG_SOC_OMAP2430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2430 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP3 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap3 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP4 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap4 +# endif +#endif + +#ifdef CONFIG_SOC_OMAP5 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap5 +# endif +#endif + +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + +/* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +#define OMAP2_DEVICE_TYPE_TEST 0 +#define OMAP2_DEVICE_TYPE_EMU 1 +#define OMAP2_DEVICE_TYPE_SEC 2 +#define OMAP2_DEVICE_TYPE_GP 3 +#define OMAP2_DEVICE_TYPE_BAD 4 + +int omap_type(void); + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 + * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 + * cpu_is_omap243x(): True for OMAP2430 + * cpu_is_omap343x(): True for OMAP3430 + * cpu_is_omap443x(): True for OMAP4430 + * cpu_is_omap446x(): True for OMAP4460 + * cpu_is_omap447x(): True for OMAP4470 + * soc_is_omap543x(): True for OMAP5430, OMAP5432 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_AM_CLASS(class, id) \ +static inline int is_am ##class (void) \ +{ \ + return (GET_AM_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_TI_CLASS(class, id) \ +static inline int is_ti ##class (void) \ +{ \ + return (GET_TI_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +#define IS_TI_SUBCLASS(subclass, id) \ +static inline int is_ti ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +#define IS_AM_SUBCLASS(subclass, id) \ +static inline int is_am ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(24xx, 0x24) +IS_OMAP_CLASS(34xx, 0x34) +IS_OMAP_CLASS(44xx, 0x44) +IS_AM_CLASS(35xx, 0x35) +IS_OMAP_CLASS(54xx, 0x54) +IS_AM_CLASS(33xx, 0x33) + +IS_TI_CLASS(81xx, 0x81) + +IS_OMAP_SUBCLASS(242x, 0x242) +IS_OMAP_SUBCLASS(243x, 0x243) +IS_OMAP_SUBCLASS(343x, 0x343) +IS_OMAP_SUBCLASS(363x, 0x363) +IS_OMAP_SUBCLASS(443x, 0x443) +IS_OMAP_SUBCLASS(446x, 0x446) +IS_OMAP_SUBCLASS(447x, 0x447) +IS_OMAP_SUBCLASS(543x, 0x543) + +IS_TI_SUBCLASS(816x, 0x816) +IS_TI_SUBCLASS(814x, 0x814) +IS_AM_SUBCLASS(335x, 0x335) + +#define cpu_is_omap24xx() 0 +#define cpu_is_omap242x() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap343x() 0 +#define cpu_is_ti81xx() 0 +#define cpu_is_ti816x() 0 +#define cpu_is_ti814x() 0 +#define soc_is_am35xx() 0 +#define soc_is_am33xx() 0 +#define soc_is_am335x() 0 +#define cpu_is_omap44xx() 0 +#define cpu_is_omap443x() 0 +#define cpu_is_omap446x() 0 +#define cpu_is_omap447x() 0 +#define soc_is_omap54xx() 0 +#define soc_is_omap543x() 0 + +#if defined(MULTI_OMAP2) +# if defined(CONFIG_ARCH_OMAP2) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() is_omap24xx() +# endif +# if defined (CONFIG_SOC_OMAP2420) +# undef cpu_is_omap242x +# define cpu_is_omap242x() is_omap242x() +# endif +# if defined (CONFIG_SOC_OMAP2430) +# undef cpu_is_omap243x +# define cpu_is_omap243x() is_omap243x() +# endif +# if defined(CONFIG_ARCH_OMAP3) +# undef cpu_is_omap34xx +# undef cpu_is_omap343x +# define cpu_is_omap34xx() is_omap34xx() +# define cpu_is_omap343x() is_omap343x() +# endif +#else +# if defined(CONFIG_ARCH_OMAP2) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() 1 +# endif +# if defined(CONFIG_SOC_OMAP2420) +# undef cpu_is_omap242x +# define cpu_is_omap242x() 1 +# endif +# if defined(CONFIG_SOC_OMAP2430) +# undef cpu_is_omap243x +# define cpu_is_omap243x() 1 +# endif +# if defined(CONFIG_ARCH_OMAP3) +# undef cpu_is_omap34xx +# define cpu_is_omap34xx() 1 +# endif +# if defined(CONFIG_SOC_OMAP3430) +# undef cpu_is_omap343x +# define cpu_is_omap343x() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap2420(): True for OMAP2420 + * cpu_is_omap2422(): True for OMAP2422 + * cpu_is_omap2423(): True for OMAP2423 + * cpu_is_omap2430(): True for OMAP2430 + * cpu_is_omap3430(): True for OMAP3430 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(2420, 0x2420) +IS_OMAP_TYPE(2422, 0x2422) +IS_OMAP_TYPE(2423, 0x2423) +IS_OMAP_TYPE(2430, 0x2430) +IS_OMAP_TYPE(3430, 0x3430) + +#define cpu_is_omap2420() 0 +#define cpu_is_omap2422() 0 +#define cpu_is_omap2423() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap3430() 0 +#define cpu_is_omap3630() 0 +#define soc_is_omap5430() 0 + +/* These are needed for the common code */ +#ifdef CONFIG_ARCH_OMAP2PLUS +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 +#define cpu_class_is_omap1() 0 +#define cpu_class_is_omap2() 1 +#endif + +#if defined(CONFIG_ARCH_OMAP2) +# undef cpu_is_omap2420 +# undef cpu_is_omap2422 +# undef cpu_is_omap2423 +# undef cpu_is_omap2430 +# define cpu_is_omap2420() is_omap2420() +# define cpu_is_omap2422() is_omap2422() +# define cpu_is_omap2423() is_omap2423() +# define cpu_is_omap2430() is_omap2430() +#endif + +#if defined(CONFIG_ARCH_OMAP3) +# undef cpu_is_omap3430 +# undef cpu_is_ti81xx +# undef cpu_is_ti816x +# undef cpu_is_ti814x +# undef soc_is_am35xx +# define cpu_is_omap3430() is_omap3430() +# undef cpu_is_omap3630 +# define cpu_is_omap3630() is_omap363x() +# define cpu_is_ti81xx() is_ti81xx() +# define cpu_is_ti816x() is_ti816x() +# define cpu_is_ti814x() is_ti814x() +# define soc_is_am35xx() is_am35xx() +#endif + +# if defined(CONFIG_SOC_AM33XX) +# undef soc_is_am33xx +# undef soc_is_am335x +# define soc_is_am33xx() is_am33xx() +# define soc_is_am335x() is_am335x() +#endif + +# if defined(CONFIG_ARCH_OMAP4) +# undef cpu_is_omap44xx +# undef cpu_is_omap443x +# undef cpu_is_omap446x +# undef cpu_is_omap447x +# define cpu_is_omap44xx() is_omap44xx() +# define cpu_is_omap443x() is_omap443x() +# define cpu_is_omap446x() is_omap446x() +# define cpu_is_omap447x() is_omap447x() +# endif + +# if defined(CONFIG_SOC_OMAP5) +# undef soc_is_omap54xx +# undef soc_is_omap543x +# define soc_is_omap54xx() is_omap54xx() +# define soc_is_omap543x() is_omap543x() +#endif + +/* Various silicon revisions for omap2 */ +#define OMAP242X_CLASS 0x24200024 +#define OMAP2420_REV_ES1_0 OMAP242X_CLASS +#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) + +#define OMAP243X_CLASS 0x24300024 +#define OMAP2430_REV_ES1_0 OMAP243X_CLASS + +#define OMAP343X_CLASS 0x34300034 +#define OMAP3430_REV_ES1_0 OMAP343X_CLASS +#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) +#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) +#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) +#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) +#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) + +#define OMAP363X_CLASS 0x36300034 +#define OMAP3630_REV_ES1_0 OMAP363X_CLASS +#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) +#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) + +#define TI816X_CLASS 0x81600034 +#define TI8168_REV_ES1_0 TI816X_CLASS +#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) + +#define TI814X_CLASS 0x81400034 +#define TI8148_REV_ES1_0 TI814X_CLASS +#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) +#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) + +#define AM35XX_CLASS 0x35170034 +#define AM35XX_REV_ES1_0 AM35XX_CLASS +#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) + +#define AM335X_CLASS 0x33500033 +#define AM335X_REV_ES1_0 AM335X_CLASS + +#define OMAP443X_CLASS 0x44300044 +#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) +#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) +#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) +#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) +#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) + +#define OMAP446X_CLASS 0x44600044 +#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) +#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8)) + +#define OMAP447X_CLASS 0x44700044 +#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) + +#define OMAP54XX_CLASS 0x54000054 +#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) + +void omap2xxx_check_revision(void); +void omap3xxx_check_revision(void); +void omap4xxx_check_revision(void); +void omap5xxx_check_revision(void); +void omap3xxx_check_features(void); +void ti81xx_check_features(void); +void omap4xxx_check_features(void); + +/* + * Runtime detection of OMAP3 features + * + * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip + * family have OS-level control over the I/O chain clock. This is + * to avoid a window during which wakeups could potentially be lost + * during powerdomain transitions. If this bit is set, it + * indicates that the chip does support OS-level control of this + * feature. + */ +extern u32 omap_features; + +#define OMAP3_HAS_L2CACHE BIT(0) +#define OMAP3_HAS_IVA BIT(1) +#define OMAP3_HAS_SGX BIT(2) +#define OMAP3_HAS_NEON BIT(3) +#define OMAP3_HAS_ISP BIT(4) +#define OMAP3_HAS_192MHZ_CLK BIT(5) +#define OMAP3_HAS_IO_WAKEUP BIT(6) +#define OMAP3_HAS_SDRC BIT(7) +#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) +#define OMAP4_HAS_MPU_1GHZ BIT(9) +#define OMAP4_HAS_MPU_1_2GHZ BIT(10) +#define OMAP4_HAS_MPU_1_5GHZ BIT(11) + + +#define OMAP3_HAS_FEATURE(feat,flag) \ +static inline unsigned int omap3_has_ ##feat(void) \ +{ \ + return omap_features & OMAP3_HAS_ ##flag; \ +} \ + +OMAP3_HAS_FEATURE(l2cache, L2CACHE) +OMAP3_HAS_FEATURE(sgx, SGX) +OMAP3_HAS_FEATURE(iva, IVA) +OMAP3_HAS_FEATURE(neon, NEON) +OMAP3_HAS_FEATURE(isp, ISP) +OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) +OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) +OMAP3_HAS_FEATURE(sdrc, SDRC) +OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) + +/* + * Runtime detection of OMAP4 features + */ +#define OMAP4_HAS_FEATURE(feat, flag) \ +static inline unsigned int omap4_has_ ##feat(void) \ +{ \ + return omap_features & OMAP4_HAS_ ##flag; \ +} \ + +OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) +OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) +OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) + +#endif /* __ASSEMBLY__ */ + diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index f8217a5a4a26..b0e77a407047 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -23,8 +23,8 @@ #include <linux/slab.h> #include <linux/io.h> -#include <plat/omap_device.h> - +#include "soc.h" +#include "omap_device.h" #include "voltage.h" #include "control.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c new file mode 100644 index 000000000000..0ff0f068bea8 --- /dev/null +++ b/arch/arm/mach-omap2/sram.c @@ -0,0 +1,305 @@ +/* + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "iomap.h" +#include "prm2xxx_3xxx.h" +#include "sdrc.h" +#include "sram.h" + +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA +#else +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#endif +#define OMAP5_SRAM_PA 0x40300000 + +#define SRAM_BOOTLOADER_SZ 0x00 + +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) + +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) + +#define GP_DEVICE 0x300 + +#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) + +static unsigned long omap_sram_start; +static unsigned long omap_sram_skip; +static unsigned long omap_sram_size; + +/* + * Depending on the target RAMFS firewall setup, the public usable amount of + * SRAM varies. The default accessible size for all device types is 2k. A GP + * device allows ARM11 but not other initiators for full size. This + * functionality seems ok until some nice security API happens. + */ +static int is_sram_locked(void) +{ + if (OMAP2_DEVICE_TYPE_GP == omap_type()) { + /* RAMFW: R/W access to all initiators for all qualifier sets */ + if (cpu_is_omap242x()) { + __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + } + if (cpu_is_omap34xx()) { + __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); + __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + } + return 0; + } else + return 1; /* assume locked with no PPA or security driver */ +} + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_sram(void) +{ + omap_sram_skip = SRAM_BOOTLOADER_SZ; + if (is_sram_locked()) { + if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PUB_PA; + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; + } else { + omap_sram_size = 0x8000; /* 32K */ + } + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PUB_PA; + omap_sram_size = 0x800; /* 2K */ + } + } else { + if (soc_is_am33xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PA; + omap_sram_size = 0xe000; /* 56K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PA; + if (cpu_is_omap242x()) + omap_sram_size = 0xa0000; /* 640K */ + else if (cpu_is_omap243x()) + omap_sram_size = 0x10000; /* 64K */ + } + } +} + +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +static void __init omap2_map_sram(void) +{ + int cached = 1; + +#ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { + omap_sram_start += PAGE_SIZE; + omap_sram_size -= SZ_16K; + } +#endif + if (cpu_is_omap34xx()) { + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + cached = 0; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, cached); +} + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + BUG_ON(!_omap2_sram_ddr_init); + _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + BUG_ON(!_omap2_sram_reprogram_sdrc); + _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + BUG_ON(!_omap2_set_prcm); + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +#ifdef CONFIG_SOC_OMAP2420 +static int __init omap242x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, + omap242x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, + omap242x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, + omap242x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap242x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static int __init omap243x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, + omap243x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, + omap243x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, + omap243x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap243x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 + +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) +{ + BUG_ON(!_omap3_sram_configure_core_dpll); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); +} + +void omap3_sram_restore_context(void) +{ + omap_sram_reset(); + + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); + omap_push_sram_idle(); +} + +static inline int omap34xx_sram_init(void) +{ + omap3_sram_restore_context(); + return 0; +} +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +static inline int am33xx_sram_init(void) +{ + return 0; +} + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap2_map_sram(); + + if (cpu_is_omap242x()) + omap242x_sram_init(); + else if (cpu_is_omap2430()) + omap243x_sram_init(); + else if (soc_is_am33xx()) + am33xx_sram_init(); + else if (cpu_is_omap34xx()) + omap34xx_sram_init(); + + return 0; +} diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h new file mode 100644 index 000000000000..ca7277c2a9ee --- /dev/null +++ b/arch/arm/mach-omap2/sram.h @@ -0,0 +1,83 @@ +/* + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASSEMBLY__ +#include <plat/sram.h> + +extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern void omap3_sram_restore_context(void); + +/* Do not use these */ +extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap24xx_sram_reprogram_clock_sz; + +extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap242x_sram_ddr_init_sz; + +extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap242x_sram_set_prcm_sz; + +extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap242x_sram_reprogram_sdrc_sz; + + +extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap243x_sram_ddr_init_sz; + +extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap243x_sram_set_prcm_sz; + +extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern unsigned long omap3_sram_configure_core_dpll_sz; + +#ifdef CONFIG_PM +extern void omap_push_sram_idle(void); +#else +static inline void omap_push_sram_idle(void) {} +#endif /* CONFIG_PM */ + +#endif /* __ASSEMBLY__ */ + +/* + * OMAP2+: define the SRAM PA addresses. + * Used by the SRAM management code and the idle sleep code. + */ +#define OMAP2_SRAM_PA 0x40200000 +#define OMAP3_SRAM_PA 0x40200000 +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PA 0x40304000 +#define OMAP4_SRAM_VA 0xfe404000 +#else +#define OMAP4_SRAM_PA 0x40300000 +#endif +#define AM33XX_SRAM_PA 0x40300000 diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 69e46631a7cd..099e4060afe9 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -37,16 +37,19 @@ #include <linux/clockchips.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> #include <asm/smp_twd.h> #include <asm/sched_clock.h> #include <asm/arch_timer.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" +#include <plat/counter-32k.h> #include <plat/dmtimer.h> -#include <plat/omap-pm.h> +#include "omap-pm.h" #include "soc.h" #include "common.h" @@ -66,11 +69,13 @@ #define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE #define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE #define OMAP3_SECURE_TIMER 12 +#define TIMER_PROP_SECURE "ti,timer-secure" #else #define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE #define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE #define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE #define OMAP3_SECURE_TIMER 1 +#define TIMER_PROP_SECURE "ti,timer-alwon" #endif #define REALTIME_COUNTER_BASE 0x48243200 @@ -103,7 +108,7 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST, - 0xffffffff - cycles, 1); + 0xffffffff - cycles, OMAP_TIMER_POSTED); return 0; } @@ -113,7 +118,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, { u32 period; - __omap_dm_timer_stop(&clkev, 1, clkev.rate); + __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -121,10 +126,10 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, period -= 1; /* Looks like we need to first set the load value separately */ __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -144,36 +149,153 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +static struct property device_disabled = { + .name = "status", + .length = sizeof("disabled"), + .value = "disabled", +}; + +static struct of_device_id omap_timer_match[] __initdata = { + { .compatible = "ti,omap2-timer", }, + { } +}; + +static struct of_device_id omap_counter_match[] __initdata = { + { .compatible = "ti,omap-counter32k", }, + { } +}; + +/** + * omap_get_timer_dt - get a timer using device-tree + * @match - device-tree match structure for matching a device type + * @property - optional timer property to match + * + * Helper function to get a timer during early boot using device-tree for use + * as kernel system timer. Optionally, the property argument can be used to + * select a timer with a specific property. Once a timer is found then mark + * the timer node in device-tree as disabled, to prevent the kernel from + * registering this timer as a platform device and so no one else can use it. + */ +static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, + const char *property) +{ + struct device_node *np; + + for_each_matching_node(np, match) { + if (!of_device_is_available(np)) { + of_node_put(np); + continue; + } + + if (property && !of_get_property(np, property, NULL)) { + of_node_put(np); + continue; + } + + prom_add_property(np, &device_disabled); + return np; + } + + return NULL; +} + +/** + * omap_dmtimer_init - initialisation function when device tree is used + * + * For secure OMAP3 devices, timers with device type "timer-secure" cannot + * be used by the kernel as they are reserved. Therefore, to prevent the + * kernel registering these devices remove them dynamically from the device + * tree on boot. + */ +void __init omap_dmtimer_init(void) +{ + struct device_node *np; + + if (!cpu_is_omap34xx()) + return; + + /* If we are a secure device, remove any secure timer nodes */ + if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { + np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure"); + if (np) + of_node_put(np); + } +} + +/** + * omap_dm_timer_get_errata - get errata flags for a timer + * + * Get the timer errata flags that are specific to the OMAP device being used. + */ +u32 __init omap_dm_timer_get_errata(void) +{ + if (cpu_is_omap24xx()) + return 0; + + return OMAP_TIMER_ERRATA_I103_I767; +} + static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + const char *oh_name; + struct device_node *np; struct omap_hwmod *oh; struct resource irq_rsrc, mem_rsrc; size_t size; int res = 0; int r; - sprintf(name, "timer%d", gptimer_id); - omap_hwmod_setup_one(name); - oh = omap_hwmod_lookup(name); + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_timer_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + + timer->irq = irq_of_parse_and_map(np, 0); + if (!timer->irq) + return -ENXIO; + + timer->io_base = of_iomap(np, 0); + + of_node_put(np); + } else { + if (omap_dm_timer_reserve_systimer(gptimer_id)) + return -ENODEV; + + sprintf(name, "timer%d", gptimer_id); + oh_name = name; + } + + oh = omap_hwmod_lookup(oh_name); if (!oh) return -ENODEV; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc); - if (r) - return -ENXIO; - timer->irq = irq_rsrc.start; - - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc); - if (r) - return -ENXIO; - timer->phys_base = mem_rsrc.start; - size = mem_rsrc.end - mem_rsrc.start; + if (!of_have_populated_dt()) { + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, + &irq_rsrc); + if (r) + return -ENXIO; + timer->irq = irq_rsrc.start; + + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, + &mem_rsrc); + if (r) + return -ENXIO; + timer->phys_base = mem_rsrc.start; + size = mem_rsrc.end - mem_rsrc.start; + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, size); + } - /* Static mapping, never released */ - timer->io_base = ioremap(timer->phys_base, size); if (!timer->io_base) return -ENXIO; @@ -182,11 +304,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(timer->fclk)) return -ENODEV; - omap_hwmod_enable(oh); - - if (omap_dm_timer_reserve_systimer(gptimer_id)) - return -ENODEV; - + /* FIXME: Need to remove hard-coded test on timer ID */ if (gptimer_id != 12) { struct clk *src; @@ -194,30 +312,48 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(src)) { res = -EINVAL; } else { - res = __omap_dm_timer_set_source(timer->fclk, src); + res = clk_set_parent(timer->fclk, src); if (IS_ERR_VALUE(res)) - pr_warning("%s: timer%i cannot set source\n", - __func__, gptimer_id); + pr_warn("%s: %s cannot set source\n", + __func__, oh->name); clk_put(src); } } + + omap_hwmod_setup_one(oh_name); + omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); - __omap_dm_timer_reset(timer, 1, 1); - timer->posted = 1; - timer->rate = clk_get_rate(timer->fclk); + if (posted) + __omap_dm_timer_enable_posted(timer); + + /* Check that the intended posted configuration matches the actual */ + if (posted != timer->posted) + return -EINVAL; + timer->rate = clk_get_rate(timer->fclk); timer->reserved = 1; return res; } static void __init omap2_gp_clockevent_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + clkev.errata = omap_dm_timer_get_errata(); + + /* + * For clock-event timers we never read the timer counter and + * so we are not impacted by errata i103 and i767. Therefore, + * we can safely ignore this errata for clock-event timers. + */ + __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); + + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, + OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -250,7 +386,8 @@ static bool use_gptimer_clksrc; */ static cycle_t clocksource_read_cycles(struct clocksource *cs) { - return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1); + return (cycle_t)__omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); } static struct clocksource clocksource_gpt = { @@ -264,7 +401,8 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(&clksrc, 1); + return __omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); return 0; } @@ -274,11 +412,26 @@ static u32 notrace dmtimer_read_sched_clock(void) static int __init omap2_sync32k_clocksource_init(void) { int ret; + struct device_node *np = NULL; struct omap_hwmod *oh; void __iomem *vbase; const char *oh_name = "counter_32k"; /* + * If device-tree is present, then search the DT blob + * to see if the 32kHz counter is supported. + */ + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_counter_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + } + + /* * First check hwmod data is available for sync32k counter */ oh = omap_hwmod_lookup(oh_name); @@ -287,7 +440,13 @@ static int __init omap2_sync32k_clocksource_init(void) omap_hwmod_setup_one(oh_name); - vbase = omap_hwmod_get_mpu_rt_va(oh); + if (np) { + vbase = of_iomap(np, 0); + of_node_put(np); + } else { + vbase = omap_hwmod_get_mpu_rt_va(oh); + } + if (!vbase) { pr_warn("%s: failed to get counter_32k resource\n", __func__); return -ENXIO; @@ -321,11 +480,15 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, { int res; - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source); + clksrc.errata = omap_dm_timer_get_errata(); + + res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + OMAP_TIMER_NONPOSTED); BUG_ON(res); __omap_dm_timer_load_start(&clksrc, - OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, + OMAP_TIMER_NONPOSTED); setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) @@ -433,11 +596,12 @@ static inline void __init realtime_counter_init(void) {} #endif -#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ +#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ clksrc_nr, clksrc_src) \ static void __init omap##name##_timer_init(void) \ { \ - omap2_gp_clockevent_init((clkev_nr), clkev_src); \ + omap_dmtimer_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ omap2_clocksource_init((clksrc_nr), clksrc_src); \ } @@ -447,20 +611,23 @@ struct sys_timer omap##name##_timer = { \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE) +OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, "ti,timer-alwon", + 2, OMAP2_MPU_SOURCE) OMAP_SYS_TIMER(2) #endif #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE) +OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE) OMAP_SYS_TIMER(3) OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, - 2, OMAP3_MPU_SOURCE) + TIMER_PROP_SECURE, 2, OMAP3_MPU_SOURCE) OMAP_SYS_TIMER(3_secure) #endif #ifdef CONFIG_SOC_AM33XX -OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE) +OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE) OMAP_SYS_TIMER(3_am33xx) #endif @@ -472,7 +639,7 @@ static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, static void __init omap4_timer_init(void) { - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE, "ti,timer-alwon"); omap2_clocksource_init(2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS /* Local timers are not supprted on OMAP4430 ES1.0 */ @@ -498,7 +665,7 @@ static void __init omap5_timer_init(void) { int err; - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE, "ti,timer-alwon"); omap2_clocksource_init(2, OMAP4_MPU_SOURCE); realtime_counter_init(); @@ -559,6 +726,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) if (timer_dev_attr) pdata->timer_capability = timer_dev_attr->timer_capability; + pdata->timer_errata = omap_dm_timer_get_errata(); + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; + pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), NULL, 0, 0); @@ -583,6 +753,10 @@ static int __init omap2_dm_timer_init(void) { int ret; + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL); if (unlikely(ret)) { pr_err("%s: device registration failed.\n", __func__); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 635e109f5ad3..827f54a1dd1d 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -26,9 +26,6 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> -#include <plat/i2c.h> -#include <plat/usb.h> - #include "soc.h" #include "twl-common.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 3c434498e12e..d1dbe125b34f 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -25,10 +25,10 @@ #include <asm/io.h> -#include <plat/usb.h> -#include <plat/omap_device.h> - +#include "soc.h" +#include "omap_device.h" #include "mux.h" +#include "usb.h" #ifdef CONFIG_MFD_OMAP_USB_HOST diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 51da21cb78f1..7b33b375fe77 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -25,12 +25,10 @@ #include <linux/io.h> #include <linux/usb/musb.h> -#include <plat/usb.h> -#include <plat/omap_device.h> - -#include "am35xx.h" - +#include "omap_device.h" +#include "soc.h" #include "mux.h" +#include "usb.h" static struct musb_hdrc_config musb_config = { .multipoint = 1, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 805bea6edf17..c5a3c6f9504e 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -15,10 +15,11 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/export.h> +#include <linux/platform_data/usb-omap.h> #include <linux/usb/musb.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "mux.h" @@ -26,180 +27,88 @@ static u8 async_cs, sync_cs; static unsigned refclk_psec; -/* t2_ps, when quantized to fclk units, must happen no earlier than - * the clock after after t1_NS. - * - * Return a possibly updated value of t2_ps, converted to nsec. - */ -static unsigned -next_clk(unsigned t1_NS, unsigned t2_ps, unsigned fclk_ps) -{ - unsigned t1_ps = t1_NS * 1000; - unsigned t1_f, t2_f; - - if ((t1_ps + fclk_ps) < t2_ps) - return t2_ps / 1000; - - t1_f = (t1_ps + fclk_ps - 1) / fclk_ps; - t2_f = (t2_ps + fclk_ps - 1) / fclk_ps; - - if (t1_f >= t2_f) - t2_f = t1_f + 1; - - return (t2_f * fclk_ps) / 1000; -} - /* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */ -static int tusb_set_async_mode(unsigned sysclk_ps, unsigned fclk_ps) +static int tusb_set_async_mode(unsigned sysclk_ps) { + struct gpmc_device_timings dev_t; struct gpmc_timings t; unsigned t_acsnh_advnh = sysclk_ps + 3000; - unsigned tmp; - - memset(&t, 0, sizeof(t)); - - /* CS_ON = t_acsnh_acsnl */ - t.cs_on = 8; - /* ADV_ON = t_acsnh_advnh - t_advn */ - t.adv_on = next_clk(t.cs_on, t_acsnh_advnh - 7000, fclk_ps); - - /* - * READ ... from omap2420 TRM fig 12-13 - */ - - /* ADV_RD_OFF = t_acsnh_advnh */ - t.adv_rd_off = next_clk(t.adv_on, t_acsnh_advnh, fclk_ps); - - /* OE_ON = t_acsnh_advnh + t_advn_oen (then wait for nRDY) */ - t.oe_on = next_clk(t.adv_on, t_acsnh_advnh + 1000, fclk_ps); - - /* ACCESS = counters continue only after nRDY */ - tmp = t.oe_on * 1000 + 300; - t.access = next_clk(t.oe_on, tmp, fclk_ps); - - /* OE_OFF = after data gets sampled */ - tmp = t.access * 1000; - t.oe_off = next_clk(t.access, tmp, fclk_ps); - - t.cs_rd_off = t.oe_off; - - tmp = t.cs_rd_off * 1000 + 7000 /* t_acsn_rdy_z */; - t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps); - - /* - * WRITE ... from omap2420 TRM fig 12-15 - */ - - /* ADV_WR_OFF = t_acsnh_advnh */ - t.adv_wr_off = t.adv_rd_off; - /* WE_ON = t_acsnh_advnh + t_advn_wen (then wait for nRDY) */ - t.we_on = next_clk(t.adv_wr_off, t_acsnh_advnh + 1000, fclk_ps); + memset(&dev_t, 0, sizeof(dev_t)); - /* WE_OFF = after data gets sampled */ - tmp = t.we_on * 1000 + 300; - t.we_off = next_clk(t.we_on, tmp, fclk_ps); + dev_t.mux = true; - t.cs_wr_off = t.we_off; + dev_t.t_ceasu = 8 * 1000; + dev_t.t_avdasu = t_acsnh_advnh - 7000; + dev_t.t_ce_avd = 1000; + dev_t.t_avdp_r = t_acsnh_advnh; + dev_t.t_oeasu = t_acsnh_advnh + 1000; + dev_t.t_oe = 300; + dev_t.t_cez_r = 7000; + dev_t.t_cez_w = dev_t.t_cez_r; + dev_t.t_avdp_w = t_acsnh_advnh; + dev_t.t_weasu = t_acsnh_advnh + 1000; + dev_t.t_wpl = 300; + dev_t.cyc_aavdh_we = 1; - tmp = t.cs_wr_off * 1000 + 7000 /* t_acsn_rdy_z */; - t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps); + gpmc_calc_timings(&t, &dev_t); return gpmc_cs_set_timings(async_cs, &t); } -static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps) +static int tusb_set_sync_mode(unsigned sysclk_ps) { + struct gpmc_device_timings dev_t; struct gpmc_timings t; unsigned t_scsnh_advnh = sysclk_ps + 3000; - unsigned tmp; - - memset(&t, 0, sizeof(t)); - t.cs_on = 8; - - /* ADV_ON = t_acsnh_advnh - t_advn */ - t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps); - - /* GPMC_CLK rate = fclk rate / div */ - t.sync_clk = 11100 /* 11.1 nsec */; - tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps; - if (tmp > 4) - return -ERANGE; - if (tmp == 0) - tmp = 1; - t.page_burst_access = (fclk_ps * tmp) / 1000; - - /* - * READ ... based on omap2420 TRM fig 12-19, 12-20 - */ - - /* ADV_RD_OFF = t_scsnh_advnh */ - t.adv_rd_off = next_clk(t.adv_on, t_scsnh_advnh, fclk_ps); - - /* OE_ON = t_scsnh_advnh + t_advn_oen * fclk_ps (then wait for nRDY) */ - tmp = (t.adv_rd_off * 1000) + (3 * fclk_ps); - t.oe_on = next_clk(t.adv_on, tmp, fclk_ps); - - /* ACCESS = number of clock cycles after t_adv_eon */ - tmp = (t.oe_on * 1000) + (5 * fclk_ps); - t.access = next_clk(t.oe_on, tmp, fclk_ps); - /* OE_OFF = after data gets sampled */ - tmp = (t.access * 1000) + (1 * fclk_ps); - t.oe_off = next_clk(t.access, tmp, fclk_ps); - - t.cs_rd_off = t.oe_off; - - tmp = t.cs_rd_off * 1000 + 7000 /* t_scsn_rdy_z */; - t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps); - - /* - * WRITE ... based on omap2420 TRM fig 12-21 - */ - - /* ADV_WR_OFF = t_scsnh_advnh */ - t.adv_wr_off = t.adv_rd_off; - - /* WE_ON = t_scsnh_advnh + t_advn_wen * fclk_ps (then wait for nRDY) */ - tmp = (t.adv_wr_off * 1000) + (3 * fclk_ps); - t.we_on = next_clk(t.adv_wr_off, tmp, fclk_ps); - - /* WE_OFF = number of clock cycles after t_adv_wen */ - tmp = (t.we_on * 1000) + (6 * fclk_ps); - t.we_off = next_clk(t.we_on, tmp, fclk_ps); - - t.cs_wr_off = t.we_off; - - tmp = t.cs_wr_off * 1000 + 7000 /* t_scsn_rdy_z */; - t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps); + memset(&dev_t, 0, sizeof(dev_t)); + + dev_t.mux = true; + dev_t.sync_read = true; + dev_t.sync_write = true; + + dev_t.clk = 11100; + dev_t.t_bacc = 1000; + dev_t.t_ces = 1000; + dev_t.t_ceasu = 8 * 1000; + dev_t.t_avdasu = t_scsnh_advnh - 7000; + dev_t.t_ce_avd = 1000; + dev_t.t_avdp_r = t_scsnh_advnh; + dev_t.cyc_aavdh_oe = 3; + dev_t.cyc_oe = 5; + dev_t.t_ce_rdyz = 7000; + dev_t.t_avdp_w = t_scsnh_advnh; + dev_t.cyc_aavdh_we = 3; + dev_t.cyc_wpl = 6; + dev_t.t_ce_rdyz = 7000; + + gpmc_calc_timings(&t, &dev_t); return gpmc_cs_set_timings(sync_cs, &t); } -extern unsigned long gpmc_get_fclk_period(void); - /* tusb driver calls this when it changes the chip's clocking */ int tusb6010_platform_retime(unsigned is_refclk) { static const char error[] = KERN_ERR "tusb6010 %s retime error %d\n"; - unsigned fclk_ps = gpmc_get_fclk_period(); unsigned sysclk_ps; int status; - if (!refclk_psec || fclk_ps == 0) + if (!refclk_psec) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; - status = tusb_set_async_mode(sysclk_ps, fclk_ps); + status = tusb_set_async_mode(sysclk_ps); if (status < 0) { printk(error, "async", status); goto done; } - status = tusb_set_sync_mode(sysclk_ps, fclk_ps); + status = tusb_set_sync_mode(sysclk_ps); if (status < 0) printk(error, "sync", status); done: @@ -283,7 +192,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, | GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITEMULTIPLE_SUPP | GPMC_CONFIG1_WRITETYPE_SYNC - | GPMC_CONFIG1_CLKACTIVATIONTIME(1) | GPMC_CONFIG1_PAGE_LEN(2) | GPMC_CONFIG1_WAIT_READ_MON | GPMC_CONFIG1_WAIT_WRITE_MON diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h new file mode 100644 index 000000000000..9b986ead7c45 --- /dev/null +++ b/arch/arm/mach-omap2/usb.h @@ -0,0 +1,82 @@ +#include <linux/platform_data/usb-omap.h> + +/* AM35x */ +/* USB 2.0 PHY Control */ +#define CONF2_PHY_GPIOMODE (1 << 23) +#define CONF2_OTGMODE (3 << 14) +#define CONF2_NO_OVERRIDE (0 << 14) +#define CONF2_FORCE_HOST (1 << 14) +#define CONF2_FORCE_DEVICE (2 << 14) +#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) +#define CONF2_SESENDEN (1 << 13) +#define CONF2_VBDTCTEN (1 << 12) +#define CONF2_REFFREQ_24MHZ (2 << 8) +#define CONF2_REFFREQ_26MHZ (7 << 8) +#define CONF2_REFFREQ_13MHZ (6 << 8) +#define CONF2_REFFREQ (0xf << 8) +#define CONF2_PHYCLKGD (1 << 7) +#define CONF2_VBUSSENSE (1 << 6) +#define CONF2_PHY_PLLON (1 << 5) +#define CONF2_RESET (1 << 4) +#define CONF2_PHYPWRDN (1 << 3) +#define CONF2_OTGPWRDN (1 << 2) +#define CONF2_DATPOL (1 << 1) + +/* TI81XX specific definitions */ +#define USBCTRL0 0x620 +#define USBSTAT0 0x624 + +/* TI816X PHY controls bits */ +#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) +#define TI816X_USBPHY_REFCLK_OSC (1 << 8) + +/* TI814X PHY controls bits */ +#define USBPHY_CM_PWRDN (1 << 0) +#define USBPHY_OTG_PWRDN (1 << 1) +#define USBPHY_CHGDET_DIS (1 << 2) +#define USBPHY_CHGDET_RSTRT (1 << 3) +#define USBPHY_SRCONDM (1 << 4) +#define USBPHY_SINKONDP (1 << 5) +#define USBPHY_CHGISINK_EN (1 << 6) +#define USBPHY_CHGVSRC_EN (1 << 7) +#define USBPHY_DMPULLUP (1 << 8) +#define USBPHY_DPPULLUP (1 << 9) +#define USBPHY_CDET_EXTCTL (1 << 10) +#define USBPHY_GPIO_MODE (1 << 12) +#define USBPHY_DPOPBUFCTL (1 << 13) +#define USBPHY_DMOPBUFCTL (1 << 14) +#define USBPHY_DPINPUT (1 << 15) +#define USBPHY_DMINPUT (1 << 16) +#define USBPHY_DPGPIO_PD (1 << 17) +#define USBPHY_DMGPIO_PD (1 << 18) +#define USBPHY_OTGVDET_EN (1 << 19) +#define USBPHY_OTGSESSEND_EN (1 << 20) +#define USBPHY_DATA_POLARITY (1 << 23) + +struct usbhs_omap_board_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + + /* have to be valid if phy_reset is true and portx is in phy mode */ + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + + /* Set this to true for ES2.x silicon */ + unsigned es2_compatibility:1; + + unsigned phy_reset:1; + + /* + * Regulators for USB PHYs. + * Each PHY can have a separate regulator. + */ + struct regulator *regulator[OMAP3_HS_USB_PORTS]; +}; + +extern void usb_musb_init(struct omap_musb_board_data *board_data); +extern void usbhs_init(const struct usbhs_omap_board_data *pdata); + +extern void am35x_musb_reset(void); +extern void am35x_musb_phy_power(u8 on); +extern void am35x_musb_clear_irq(void); +extern void am35x_set_mode(u8 musb_mode); +extern void ti81xx_musb_phy_power(u8 on); + diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index b2f1c67043a2..f6b6c37ac3f4 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -11,7 +11,7 @@ #include <linux/io.h> #include <linux/err.h> -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "wd_timer.h" #include "common.h" diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h index f6bbba73b535..a78f81034a9f 100644 --- a/arch/arm/mach-omap2/wd_timer.h +++ b/arch/arm/mach-omap2/wd_timer.h @@ -10,7 +10,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H #define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" extern int omap2_wd_timer_disable(struct omap_hwmod *oh); extern int omap2_wd_timer_reset(struct omap_hwmod *oh); diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index ed5a95ece9eb..77ee0b732237 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -61,6 +61,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -132,6 +133,7 @@ void __init s3c2416_map_io(void) /* initialize device information early */ s3c2416_default_sdhci0(); s3c2416_default_sdhci1(); + s3c64xx_spi_setname("s3c2443-spi"); iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index ab648ad8fa50..165b6a6b3daa 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -43,6 +43,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -100,6 +101,9 @@ void __init s3c2443_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; + /* initialize device information early */ + s3c64xx_spi_setname("s3c2443-spi"); + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 6e6a0a9d6778..111e404a81fd 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -44,6 +44,7 @@ #include <plat/sdhci.h> #include <plat/adc-core.h> #include <plat/fb-core.h> +#include <plat/spi-core.h> #include <plat/gpio-cfg.h> #include <plat/regs-irqtype.h> #include <plat/regs-serial.h> @@ -179,6 +180,7 @@ void __init s5p6440_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); @@ -193,6 +195,7 @@ void __init s5p6450_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index 621908658861..cc6e561c9958 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -45,6 +45,7 @@ #include <plat/fb-core.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include <plat/watchdog-reset.h> @@ -165,6 +166,8 @@ void __init s5pc100_map_io(void) s3c_onenand_setname("s5pc100-onenand"); s3c_fb_setname("s5pc100-fb"); s3c_cfcon_setname("s5pc100-pata"); + + s3c64xx_spi_setname("s5pc100-spi"); } void __init s5pc100_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 4c9e9027df9a..a0c50efe8145 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -43,6 +43,7 @@ #include <plat/iic-core.h> #include <plat/keypad-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -196,6 +197,8 @@ void __init s5pv210_map_io(void) /* setup TV devices */ s5p_hdmi_setname("s5pv210-hdmi"); + + s3c64xx_spi_setname("s5pv210-spi"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 2917668f0091..ebbffc25f24f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -247,7 +247,7 @@ void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*16way */ - l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff); + l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff); #endif r8a7779_pm_init(); diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index a267c6d30e37..6679d8a7c682 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -34,8 +34,6 @@ BIAS(in_nopull, PIN_INPUT_NOPULL); BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); BIAS(in_pu, PIN_INPUT_PULLUP); BIAS(in_pd, PIN_INPUT_PULLDOWN); -BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP); -BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW); BIAS(out_hi, PIN_OUTPUT_HIGH); BIAS(out_lo, PIN_OUTPUT_LOW); BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); @@ -47,14 +45,34 @@ BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SL BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); /* Sleep modes */ -BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); -BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); -BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); +BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); +BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); +BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| + PIN_SLPM_PDIS_ENABLED); +BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| + PIN_SLPM_PDIS_DISABLED); +BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| + PIN_SLPM_PDIS_DISABLED); /* We use these to define hog settings that are always done on boot */ #define DB8500_MUX_HOG(group,func) \ @@ -70,13 +88,16 @@ BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_NOPULL|PIN_S PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func) #define DB8500_PIN(pin,conf,dev) \ PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) -#define DB8500_PIN_SLEEP(pin, conf, dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ +#define DB8500_PIN_IDLE(pin, conf, dev) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500", \ pin, conf) - -#define DB8500_PIN_SLEEP(pin,conf,dev) \ +#define DB8500_PIN_SLEEP(pin, conf, dev) \ PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ pin, conf) +#define DB8500_MUX_STATE(group, func, dev, state) \ + PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func) +#define DB8500_PIN_STATE(pin, conf, dev, state) \ + PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf) /* Pin control settings */ static struct pinctrl_map __initdata mop500_family_pinmap[] = { @@ -113,7 +134,7 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { * UART0, we do not mux in u0 here. * uart-0 pins gpio configuration should be kept intact to prevent * a glitch in tx line when the tty dev is opened. Later these pins - * are configured to uart mop500_pins_uart0 + * are configured by uart driver */ DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */ DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */ @@ -124,12 +145,13 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { * TODO: is this used on U8500 variants and Snowball really? * The setting on GPIO31 conflicts with magnetometer use on hrefv60 */ - DB8500_MUX_HOG("u2rxtx_c_1", "u2"), - DB8500_MUX_HOG("u2ctsrts_c_1", "u2"), - DB8500_PIN_HOG("GPIO29_W2", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO30_W3", out_hi), /* TXD */ - DB8500_PIN_HOG("GPIO31_V3", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO32_V2", out_hi), /* RTS */ + /* default state for UART2 */ + DB8500_MUX("u2rxtx_c_1", "u2", "uart2"), + DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */ + DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */ + /* Sleep state for UART2 */ + DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"), + DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"), /* * The following pin sets were known as "runtime pins" before being * converted to the pinctrl model. Here we model them as "default" @@ -141,11 +163,18 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ - /* UART0 sleep state */ + /* Sleep state for UART0 */ DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"), DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"), DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"), DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"), + /* Mux in UART1 after initialization */ + DB8500_MUX("u1rxtx_a_1", "u1", "uart1"), + DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */ + DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */ + /* Sleep state for UART1 */ + DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"), + DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"), /* MSP1 for ALSA codec */ DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"), DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"), @@ -162,7 +191,10 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */ - DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"), + DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"), + DB8500_PIN("GPIO69_E2", in_pu, "0-0070"), + /* LCD VSI1 sleep state */ + DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"), /* Mux in i2c0 block, default state */ DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"), /* i2c0 sleep state */ @@ -195,6 +227,18 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */ DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */ DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */ + /* SDI0 sleep state */ + DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"), + /* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */ DB8500_MUX("mc1_a_1", "mc1", "sdi1"), DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */ @@ -204,6 +248,15 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */ DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */ DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */ + /* SDI1 sleep state */ + DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */ + DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */ + DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */ + DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */ + DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */ + /* Mux in SDI2 (here called MC2) used for for PoP eMMC */ DB8500_MUX("mc2_a_1", "mc2", "sdi2"), DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */ @@ -217,6 +270,19 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */ DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */ DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */ + /* SDI2 sleep state */ + DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */ + DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */ + DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */ + DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */ + DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */ + DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */ + DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */ + DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */ + DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */ + /* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */ DB8500_MUX("mc4_a_1", "mc4", "sdi4"), DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */ @@ -230,6 +296,19 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */ DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */ DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */ + /*SDI4 sleep state */ + DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */ + DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */ + DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */ + DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */ + DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */ + DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */ + DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */ + DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */ + DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */ + /* Mux in USB pins, drive STP high */ DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"), DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */ @@ -239,10 +318,232 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */ DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ + /* SPI2 idle state */ + DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ + DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ + DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ /* SPI2 sleep state */ + DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */ DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ + + /* ske default state */ + DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), + DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */ + DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */ + DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */ + DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */ + DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */ + DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */ + DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */ + DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */ + DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ + DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ + DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ + DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ + DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ + DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ + DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ + DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ + /* ske sleep state */ + DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ + DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ + DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ + DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ + DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ + DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ + DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ + DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ + DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ + DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ + DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ + DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ + DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ + DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ + DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ + DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ + + /* STM APE pins states */ + DB8500_MUX_STATE("stmape_c_1", "stmape", + "stm", "ape_mipi34"), + DB8500_PIN_STATE("GPIO70_G5", in_nopull, + "stm", "ape_mipi34"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", in_nopull, + "stm", "ape_mipi34"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", in_nopull, + "stm", "ape_mipi34"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", in_nopull, + "stm", "ape_mipi34"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", in_nopull, + "stm", "ape_mipi34"), /* dat0 */ + + DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* dat0 */ + + DB8500_MUX_STATE("stmape_oc1_1", "stmape", + "stm", "ape_microsd"), + DB8500_PIN_STATE("GPIO23_AA4", in_nopull, + "stm", "ape_microsd"), /* clk */ + DB8500_PIN_STATE("GPIO25_Y4", in_nopull, + "stm", "ape_microsd"), /* dat0 */ + DB8500_PIN_STATE("GPIO26_Y2", in_nopull, + "stm", "ape_microsd"), /* dat1 */ + DB8500_PIN_STATE("GPIO27_AA2", in_nopull, + "stm", "ape_microsd"), /* dat2 */ + DB8500_PIN_STATE("GPIO28_AA1", in_nopull, + "stm", "ape_microsd"), /* dat3 */ + + DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, + "stm", "ape_microsd_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, + "stm", "ape_microsd_sleep"), /* dat0 */ + DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, + "stm", "ape_microsd_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, + "stm", "ape_microsd_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, + "stm", "ape_microsd_sleep"), /* dat3 */ + + /* STM Modem pins states */ + DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", + "stm", "mod_mipi34"), + DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", + "stm", "mod_mipi34"), + DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", + "stm", "mod_mipi34"), + DB8500_PIN_STATE("GPIO70_G5", in_nopull, + "stm", "mod_mipi34"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", in_nopull, + "stm", "mod_mipi34"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", in_nopull, + "stm", "mod_mipi34"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", in_nopull, + "stm", "mod_mipi34"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", in_nopull, + "stm", "mod_mipi34"), /* dat0 */ + DB8500_PIN_STATE("GPIO75_H2", in_pu, + "stm", "mod_mipi34"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", out_lo, + "stm", "mod_mipi34"), /* uartmod tx */ + + DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* dat0 */ + DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, + "stm", "mod_mipi34_sleep"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, + "stm", "mod_mipi34_sleep"), /* uartmod tx */ + + DB8500_MUX_STATE("stmmod_b_1", "stmmod", + "stm", "mod_microsd"), + DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", + "stm", "mod_microsd"), + DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", + "stm", "mod_microsd"), + DB8500_PIN_STATE("GPIO23_AA4", in_nopull, + "stm", "mod_microsd"), /* clk */ + DB8500_PIN_STATE("GPIO25_Y4", in_nopull, + "stm", "mod_microsd"), /* dat0 */ + DB8500_PIN_STATE("GPIO26_Y2", in_nopull, + "stm", "mod_microsd"), /* dat1 */ + DB8500_PIN_STATE("GPIO27_AA2", in_nopull, + "stm", "mod_microsd"), /* dat2 */ + DB8500_PIN_STATE("GPIO28_AA1", in_nopull, + "stm", "mod_microsd"), /* dat3 */ + DB8500_PIN_STATE("GPIO75_H2", in_pu, + "stm", "mod_microsd"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", out_lo, + "stm", "mod_microsd"), /* uartmod tx */ + + DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, + "stm", "mod_microsd_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* dat0 */ + DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, + "stm", "mod_microsd_sleep"), /* uartmod tx */ + + /* STM dual Modem/APE pins state */ + DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", + "stm", "mod_mipi34_ape_mipi60"), + DB8500_MUX_STATE("stmape_c_2", "stmape", + "stm", "mod_mipi34_ape_mipi60"), + DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", + "stm", "mod_mipi34_ape_mipi60"), + DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", + "stm", "mod_mipi34_ape_mipi60"), + DB8500_PIN_STATE("GPIO70_G5", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ + DB8500_PIN_STATE("GPIO75_H2", in_pu, + "stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", out_lo, + "stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */ + DB8500_PIN_STATE("GPIO155_C19", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* clk */ + DB8500_PIN_STATE("GPIO156_C17", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ + DB8500_PIN_STATE("GPIO157_A18", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ + DB8500_PIN_STATE("GPIO158_C18", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ + DB8500_PIN_STATE("GPIO159_B19", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ + + DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ + DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */ + DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ }; /* @@ -268,32 +569,48 @@ static struct pinctrl_map __initdata mop500_pinmap[] = { DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu), /* Mux in UART1 and set the pull-ups */ DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_MUX_HOG("u1ctsrts_a_1", "u1"), DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */ DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */ - DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO7_AG5", out_hi), /* RTS */ /* * Runtime stuff: make it possible to mux in the SKE keypad * and bias the pins */ - DB8500_MUX("kp_a_2", "kp", "ske"), - DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ - DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ - DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ - DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ - DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ - DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ - DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ - DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ - DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ + /* ske default state */ + DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), + DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */ + DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */ + DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */ + DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */ + DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */ + DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */ + DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */ + DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */ + DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ + DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ + DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ + DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ + DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ + DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ + DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ + DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ + /* ske sleep state */ + DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ + DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ + DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ + DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ + DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ + DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ + DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ + DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ + DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ + DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ + DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ + DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ + DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ + DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ + DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ + DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ + /* Mux in and drive the SDI0 DAT31DIR line high at runtime */ DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"), DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"), @@ -396,28 +713,6 @@ static struct pinctrl_map __initdata hrefv60_pinmap[] = { DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"), DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), - /* - * Make it possible to mux in the SKE keypad and bias the pins - * FIXME: what's the point with this on HREFv60? KP/SKE is already - * muxed in at another place! Enabling this will bork. - */ - DB8500_MUX("kp_a_2", "kp", "ske"), - DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ - DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ - DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ - DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ - DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ - DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ - DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ - DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ - DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ }; static struct pinctrl_map __initdata u9500_pinmap[] = { diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 2236cbd03cd7..1f3fbc2bb776 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -16,6 +16,7 @@ #include <linux/stat.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/irq.h> #include <linux/platform_data/clk-ux500.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mach-vexpress/reset.c b/arch/arm/mach-vexpress/reset.c new file mode 100644 index 000000000000..465923aa3819 --- /dev/null +++ b/arch/arm/mach-vexpress/reset.c @@ -0,0 +1,141 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#include <linux/jiffies.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/stat.h> +#include <linux/vexpress.h> + +static void vexpress_reset_do(struct device *dev, const char *what) +{ + int err = -ENOENT; + struct vexpress_config_func *func = + vexpress_config_func_get_by_dev(dev); + + if (func) { + unsigned long timeout; + + err = vexpress_config_write(func, 0, 0); + + timeout = jiffies + HZ; + while (time_before(jiffies, timeout)) + cpu_relax(); + } + + dev_emerg(dev, "Unable to %s (%d)\n", what, err); +} + +static struct device *vexpress_power_off_device; + +void vexpress_power_off(void) +{ + vexpress_reset_do(vexpress_power_off_device, "power off"); +} + +static struct device *vexpress_restart_device; + +void vexpress_restart(char str, const char *cmd) +{ + vexpress_reset_do(vexpress_restart_device, "restart"); +} + +static ssize_t vexpress_reset_active_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", vexpress_restart_device == dev); +} + +static ssize_t vexpress_reset_active_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + long value; + int err = kstrtol(buf, 0, &value); + + if (!err && value) + vexpress_restart_device = dev; + + return err ? err : count; +} + +DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show, + vexpress_reset_active_store); + + +enum vexpress_reset_func { FUNC_RESET, FUNC_SHUTDOWN, FUNC_REBOOT }; + +static struct of_device_id vexpress_reset_of_match[] = { + { + .compatible = "arm,vexpress-reset", + .data = (void *)FUNC_RESET, + }, { + .compatible = "arm,vexpress-shutdown", + .data = (void *)FUNC_SHUTDOWN + }, { + .compatible = "arm,vexpress-reboot", + .data = (void *)FUNC_REBOOT + }, + {} +}; + +static int vexpress_reset_probe(struct platform_device *pdev) +{ + enum vexpress_reset_func func; + const struct of_device_id *match = + of_match_device(vexpress_reset_of_match, &pdev->dev); + + if (match) + func = (enum vexpress_reset_func)match->data; + else + func = pdev->id_entry->driver_data; + + switch (func) { + case FUNC_SHUTDOWN: + vexpress_power_off_device = &pdev->dev; + break; + case FUNC_RESET: + if (!vexpress_restart_device) + vexpress_restart_device = &pdev->dev; + device_create_file(&pdev->dev, &dev_attr_active); + break; + case FUNC_REBOOT: + vexpress_restart_device = &pdev->dev; + device_create_file(&pdev->dev, &dev_attr_active); + break; + }; + + return 0; +} + +static const struct platform_device_id vexpress_reset_id_table[] = { + { .name = "vexpress-reset", .driver_data = FUNC_RESET, }, + { .name = "vexpress-shutdown", .driver_data = FUNC_SHUTDOWN, }, + { .name = "vexpress-reboot", .driver_data = FUNC_REBOOT, }, + {} +}; + +static struct platform_driver vexpress_reset_driver = { + .probe = vexpress_reset_probe, + .driver = { + .name = "vexpress-reset", + .of_match_table = vexpress_reset_of_match, + }, + .id_table = vexpress_reset_id_table, +}; + +static int __init vexpress_reset_init(void) +{ + return platform_driver_register(&vexpress_reset_driver); +} +device_initcall(vexpress_reset_init); diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b9f60ebe3bc4..023f443784ec 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -856,8 +856,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (thumb2_32b) { offset.un = 0; handler = do_alignment_t32_to_handler(&instr, regs, &offset); - } else + } else { + offset.un = 0; handler = do_alignment_ldmstm; + } break; default: diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 477a2d23ddf1..58bc3e4d3bd0 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -610,7 +610,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller) { u64 mask = get_coherent_dma_mask(dev); - struct page *page; + struct page *page = NULL; void *addr; #ifdef CONFIG_DMA_API_DEBUG diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index bf312c354a21..0f5a5f2a2c7b 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -17,7 +17,6 @@ struct arm_vmregion { struct list_head vm_list; unsigned long vm_start; unsigned long vm_end; - void *priv; int vm_active; const void *caller; }; diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 540d3a7d92df..e7b920b58675 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -55,7 +55,7 @@ struct platform_device *__init imx_add_mxc_mmc( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K - 1, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 7cd56ed5cd94..82fcb206b5b2 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -26,6 +26,7 @@ config ARCH_OMAP2PLUS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select OMAP_DM_TIMER + select PINCTRL select PROC_DEVICETREE if PROC_FS select SPARSE_IRQ select USE_OF diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index dacaee009a4e..8d885848600a 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,13 +3,12 @@ # # Common support -obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o +obj-y := sram.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- := # omap_device support (OMAP2+ only at the moment) -obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o @@ -20,4 +19,3 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c deleted file mode 100644 index 9d7ac20ef8f9..000000000000 --- a/arch/arm/plat-omap/clock.c +++ /dev/null @@ -1,544 +0,0 @@ -/* - * linux/arch/arm/plat-omap/clock.c - * - * Copyright (C) 2004 - 2008 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * - * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/export.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/cpufreq.h> -#include <linux/io.h> - -#include <plat/clock.h> - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); - -static struct clk_functions *arch_clock; - -/* - * Standard clock functions defined in include/linux/clk.h - */ - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (!arch_clock || !arch_clock->clk_enable) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - if (!arch_clock || !arch_clock->clk_disable) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - pr_err("Trying disable clock %s with 0 usecount\n", - clk->name); - WARN_ON(1); - goto out; - } - - arch_clock->clk_disable(clk); - -out: - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->rate; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * Optional clock functions defined in include/linux/clk.h - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - if (!arch_clock || !arch_clock->clk_round_rate) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_round_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_rate) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_set_rate(clk, rate); - if (ret == 0) - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_parent) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - ret = arch_clock->clk_set_parent(clk, parent); - if (ret == 0) - propagate_rate(clk); - } else - ret = -EBUSY; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -/* - * OMAP specific clock functions shared between omap1 and omap2 - */ - -int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - -/* Used for clocks that always have same value as the parent clock */ -unsigned long followparent_recalc(struct clk *clk) -{ - return clk->parent->rate; -} - -/* - * Used for clocks that have the same value as the parent clock, - * divided by some factor - */ -unsigned long omap_fixed_divisor_recalc(struct clk *clk) -{ - WARN_ON(!clk->fixed_div); - - return clk->parent->rate / clk->fixed_div; -} - -void clk_reparent(struct clk *child, struct clk *parent) -{ - list_del_init(&child->sibling); - if (parent) - list_add(&child->sibling, &parent->children); - child->parent = parent; - - /* now do the debugfs renaming to reattach the child - to the proper parent */ -} - -/* Propagate rate to children */ -void propagate_rate(struct clk *tclk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &tclk->children, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -static LIST_HEAD(root_clks); - -/** - * recalculate_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - * Called at init. - */ -void recalculate_root_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &root_clks, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -/** - * clk_preinit - initialize any fields in the struct clk before clk init - * @clk: struct clk * to initialize - * - * Initialize any struct clk fields needed before normal clk initialization - * can run. No return value. - */ -void clk_preinit(struct clk *clk) -{ - INIT_LIST_HEAD(&clk->children); -} - -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - /* - * trap out already registered clocks - */ - if (clk->node.next || clk->node.prev) - return 0; - - mutex_lock(&clocks_mutex); - if (clk->parent) - list_add(&clk->sibling, &clk->parent->children); - else - list_add(&clk->sibling, &root_clks); - - list_add(&clk->node, &clocks); - if (clk->init) - clk->init(clk); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->sibling); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -void clk_enable_init_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clocks, node) { - if (clkp->flags & ENABLE_ON_INIT) - clk_enable(clkp); - } -} - -int omap_clk_enable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->allow_idle) - c->ops->allow_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -int omap_clk_disable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->deny_idle) - c->ops->deny_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -/* - * Low level helpers - */ -static int clkll_enable_null(struct clk *clk) -{ - return 0; -} - -static void clkll_disable_null(struct clk *clk) -{ -} - -const struct clkops clkops_null = { - .enable = clkll_enable_null, - .disable = clkll_disable_null, -}; - -/* - * Dummy clock - * - * Used for clock aliases that are needed on some OMAPs, but not others - */ -struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_null, -}; - -/* - * - */ - -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -static int __init clk_disable_unused(void) -{ - struct clk *ck; - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_disable_unused) - return 0; - - pr_info("clock: disabling unused clocks to save power\n"); - - spin_lock_irqsave(&clockfw_lock, flags); - list_for_each_entry(ck, &clocks, node) { - if (ck->ops == &clkops_null) - continue; - - if (ck->usecount > 0 || !ck->enable_reg) - continue; - - arch_clock->clk_disable_unused(ck); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -late_initcall(clk_disable_unused); -late_initcall(omap_clk_enable_autoidle_all); -#endif - -int __init clk_init(struct clk_functions * custom_clocks) -{ - if (!custom_clocks) { - pr_err("No custom clock functions registered\n"); - BUG(); - } - - arch_clock = custom_clocks; - - return 0; -} - -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) -/* - * debugfs support to trace clock tree hierarchy and attributes - */ - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static struct dentry *clk_debugfs_root; - -static int clk_dbg_show_summary(struct seq_file *s, void *unused) -{ - struct clk *c; - struct clk *pa; - - mutex_lock(&clocks_mutex); - seq_printf(s, "%-30s %-30s %-10s %s\n", - "clock-name", "parent-name", "rate", "use-count"); - - list_for_each_entry(c, &clocks, node) { - pa = c->parent; - seq_printf(s, "%-30s %-30s %-10lu %d\n", - c->name, pa ? pa->name : "none", c->rate, c->usecount); - } - mutex_unlock(&clocks_mutex); - - return 0; -} - -static int clk_dbg_open(struct inode *inode, struct file *file) -{ - return single_open(file, clk_dbg_show_summary, inode->i_private); -} - -static const struct file_operations debug_clock_fops = { - .open = clk_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->parent; - - d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dent = d; - - d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - - d = debugfs_create_file("summary", S_IRUGO, - d, NULL, &debug_clock_fops); - if (!d) - return -ENOMEM; - - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c deleted file mode 100644 index 111315a69354..000000000000 --- a/arch/arm/plat-omap/common.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/arm/plat-omap/common.c - * - * Code common to all OMAP machines. - * The file is created by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/dma-mapping.h> - -#include <plat/common.h> -#include <plat/vram.h> -#include <linux/platform_data/dsp-omap.h> -#include <plat/dma.h> - -#include <plat/omap-secure.h> - -void __init omap_reserve(void) -{ - omap_vram_reserve_sdram_memblock(); - omap_dsp_reserve_sdram_memblock(); - omap_secure_ram_reserve_memblock(); - omap_barrier_reserve_memblock(); -} - -void __init omap_init_consistent_dma_size(void) -{ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); -#endif -} - -/* - * Stub function for OMAP2 so that common files - * continue to build when custom builds are used - */ -int __weak omap_secure_ram_reserve_memblock(void) -{ - return 0; -} diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 87ba8dd0d791..f3771cdb9838 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,9 +22,6 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <plat/common.h> -#include <plat/clock.h> - /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 5a4678edd65a..a609e2161817 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -15,8 +15,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <mach/hardware.h> -#include "../mach-omap2/debug-devices.h" +#include <plat/debug-devices.h> /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index ea29bbe8e5cf..c43ea21f33b4 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -17,16 +17,33 @@ #include <linux/platform_data/gpio-omap.h> #include <linux/slab.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include <plat/fpga.h> - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the * debug board (all green), accessed through FPGA registers. */ +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + static struct h2p2_dbg_fpga __iomem *fpga; static u16 fpga_led_state; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c76ed8bff838..c288b76f8e6c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,9 +36,7 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <plat/cpu.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA @@ -175,12 +173,13 @@ static inline void set_gdma_dev(int req, int dev) #define omap_writel(val, reg) do {} while (0) #endif +#ifdef CONFIG_ARCH_OMAP1 void omap_set_dma_priority(int lch, int dst_port, int priority) { unsigned long reg; u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { switch (dst_port) { case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ reg = OMAP_TC_OCPT1_PRIOR; @@ -203,18 +202,22 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) l |= (priority & 0xf) << 8; omap_writel(l, reg); } +} +#endif - if (cpu_class_is_omap2()) { - u32 ccr; +#ifdef CONFIG_ARCH_OMAP2PLUS +void omap_set_dma_priority(int lch, int dst_port, int priority) +{ + u32 ccr; - ccr = p->dma_read(CCR, lch); - if (priority) - ccr |= (1 << 6); - else - ccr &= ~(1 << 6); - p->dma_write(ccr, CCR, lch); - } + ccr = p->dma_read(CCR, lch); + if (priority) + ccr |= (1 << 6); + else + ccr &= ~(1 << 6); + p->dma_write(ccr, CCR, lch); } +#endif EXPORT_SYMBOL(omap_set_dma_priority); void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, @@ -228,7 +231,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, l |= data_type; p->dma_write(l, CSDP, lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 ccr; ccr = p->dma_read(CCR, lch); @@ -244,7 +247,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, p->dma_write(ccr, CCR2, lch); } - if (cpu_class_is_omap2() && dma_trigger) { + if (dma_omap2plus() && dma_trigger) { u32 val; val = p->dma_read(CCR, lch); @@ -284,7 +287,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { BUG_ON(omap_dma_in_1510_mode()); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CCR2, lch); @@ -314,7 +317,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) p->dma_write(w, LCH_CTRL, lch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 val; val = p->dma_read(CCR, lch); @@ -342,7 +345,7 @@ EXPORT_SYMBOL(omap_set_dma_color_mode); void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 csdp; csdp = p->dma_read(CSDP, lch); @@ -355,7 +358,7 @@ EXPORT_SYMBOL(omap_set_dma_write_mode); void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) { - if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { + if (dma_omap1() && !dma_omap15xx()) { u32 l; l = p->dma_read(LCH_CTRL, lch); @@ -373,7 +376,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CSDP, lch); @@ -415,7 +418,7 @@ EXPORT_SYMBOL(omap_set_dma_params); void omap_set_dma_src_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CSEI, lch); @@ -447,13 +450,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x2; break; } @@ -463,7 +466,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) * fall through */ case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -487,7 +490,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { l = p->dma_read(CSDP, lch); l &= ~(0x1f << 9); l |= dest_port << 9; @@ -508,7 +511,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_params); void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CDEI, lch); @@ -540,19 +543,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x2; else burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -573,7 +576,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -587,7 +590,7 @@ static inline void omap_disable_channel_irq(int lch) /* disable channel interrupts */ p->dma_write(0, CICR, lch); /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -611,7 +614,7 @@ static inline void enable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); - if (cpu_class_is_omap1()) + if (dma_omap1()) l &= ~(1 << 14); /* Set the ENABLE_LNK bits */ @@ -619,7 +622,7 @@ static inline void enable_lnk(int lch) l = dma_chan[lch].next_lch | (1 << 15); #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) + if (dma_omap2plus()) if (dma_chan[lch].next_linked_ch != -1) l = dma_chan[lch].next_linked_ch | (1 << 15); #endif @@ -636,12 +639,12 @@ static inline void disable_lnk(int lch) /* Disable interrupts */ omap_disable_channel_irq(lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* Set the STOP_LNK bit */ l |= 1 << 14; } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -655,7 +658,7 @@ static inline void omap2_enable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -673,7 +676,7 @@ static inline void omap2_disable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -712,7 +715,7 @@ int omap_request_dma(int dev_id, const char *dev_name, if (p->clear_lch_regs) p->clear_lch_regs(free_ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(free_ch); spin_unlock_irqrestore(&dma_chan_lock, flags); @@ -723,7 +726,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { chan->chain_id = -1; chan->next_linked_ch = -1; } @@ -731,13 +734,13 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - if (cpu_class_is_omap1()) + if (dma_omap1()) chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; - else if (cpu_class_is_omap2()) + else if (dma_omap2plus()) chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | OMAP2_DMA_TRANS_ERR_IRQ; - if (cpu_is_omap16xx()) { + if (dma_omap16xx()) { /* If the sync device is set, configure it dynamically. */ if (dev_id != 0) { set_gdma_dev(free_ch + 1, dev_id); @@ -748,11 +751,11 @@ int omap_request_dma(int dev_id, const char *dev_name, * id. */ p->dma_write(dev_id | (1 << 10), CCR, free_ch); - } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { + } else if (dma_omap1()) { p->dma_write(dev_id, CCR, free_ch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { omap_enable_channel_irq(free_ch); omap2_enable_irq_lch(free_ch); } @@ -774,7 +777,7 @@ void omap_free_dma(int lch) } /* Disable interrupt for logical channel */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(lch); /* Disable all DMA interrupts for the channel. */ @@ -784,7 +787,7 @@ void omap_free_dma(int lch) p->dma_write(0, CCR, lch); /* Clear registers */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(lch); spin_lock_irqsave(&dma_chan_lock, flags); @@ -810,7 +813,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) { u32 reg; - if (!cpu_class_is_omap2()) { + if (dma_omap1()) { printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); return; } @@ -849,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio, } l = p->dma_read(CCR, lch); l &= ~((1 << 6) | (1 << 26)); - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); else l |= ((read_prio & 0x1) << 6); @@ -882,7 +885,7 @@ void omap_start_dma(int lch) * The CPC/CDAC register needs to be initialized to zero * before starting dma transfer. */ - if (cpu_is_omap15xx()) + if (dma_omap15xx()) p->dma_write(0, CPC, lch); else p->dma_write(0, CDAC, lch); @@ -1045,7 +1048,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CSAC, lch); @@ -1053,7 +1056,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) offset = p->dma_read(CSAC, lch); - if (!cpu_is_omap15xx()) { + if (!dma_omap15xx()) { /* * CDAC == 0 indicates that the DMA transfer on the channel has * not been started (no data has been transferred so far). @@ -1065,7 +1068,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = p->dma_read(CSSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); return offset; @@ -1084,7 +1087,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CDAC, lch); @@ -1093,7 +1096,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is * read before the DMA controller finished disabling the channel. */ - if (!cpu_is_omap15xx() && offset == 0) { + if (!dma_omap15xx() && offset == 0) { offset = p->dma_read(CDAC, lch); /* * CDAC == 0 indicates that the DMA transfer on the channel has @@ -1104,7 +1107,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = p->dma_read(CDSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); return offset; @@ -1121,7 +1124,7 @@ int omap_dma_running(void) { int lch; - if (cpu_class_is_omap1()) + if (dma_omap1()) if (omap_lcd_dma_running()) return 1; @@ -2024,7 +2027,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) dma_chan = d->chan; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { @@ -2036,7 +2039,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(ch); dma_chan[ch].dev_id = -1; @@ -2045,7 +2048,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) if (ch >= 6 && enable_1510_mode) continue; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* * request_irq() doesn't like dev_id (ie. ch) being * zero, so we have to kludge around this. @@ -2070,11 +2073,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); if (dma_irq < 0) { @@ -2089,9 +2092,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - /* reserve dma channels 0 and 1 in high security devices */ - if (cpu_is_omap34xx() && - (omap_type() != OMAP2_DEVICE_TYPE_GP)) { + /* reserve dma channels 0 and 1 in high security devices on 34xx */ + if (d->dev_caps & HS_CHANNELS_RESERVED) { pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); dma_chan[0].dev_id = 0; dma_chan[1].dev_id = 1; @@ -2118,7 +2120,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) { int dma_irq; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { char irq_name[4]; strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 938b50a33439..9deeb3064d33 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -35,16 +35,16 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/clk.h> #include <linux/module.h> #include <linux/io.h> #include <linux/device.h> #include <linux/err.h> #include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <plat/dmtimer.h> -#include <plat/omap-pm.h> - -#include <mach/hardware.h> static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); @@ -84,10 +84,6 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, static void omap_timer_restore_context(struct omap_dm_timer *timer) { - if (timer->revision == 1) - __raw_writel(timer->context.tistat, timer->sys_stat); - - __raw_writel(timer->context.tisr, timer->irq_stat); omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, timer->context.twer); omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, @@ -122,21 +118,13 @@ static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) static void omap_dm_timer_reset(struct omap_dm_timer *timer) { - omap_dm_timer_enable(timer); - if (timer->pdev->id != 1) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); - omap_dm_timer_wait_for_reset(timer); - } - + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); + omap_dm_timer_wait_for_reset(timer); __omap_dm_timer_reset(timer, 0, 0); - omap_dm_timer_disable(timer); - timer->posted = 1; } int omap_dm_timer_prepare(struct omap_dm_timer *timer) { - int ret; - /* * FIXME: OMAP1 devices do not use the clock framework for dmtimers so * do not call clk_get() for these devices. @@ -150,13 +138,15 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer) } } + omap_dm_timer_enable(timer); + if (timer->capability & OMAP_TIMER_NEEDS_RESET) omap_dm_timer_reset(timer); - ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); + __omap_dm_timer_enable_posted(timer); + omap_dm_timer_disable(timer); - timer->posted = 1; - return ret; + return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); } static inline u32 omap_dm_timer_reserved_systimer(int id) @@ -212,6 +202,13 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) unsigned long flags; int ret = 0; + /* Requesting timer by ID is not supported when device tree is used */ + if (of_have_populated_dt()) { + pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n", + __func__); + return NULL; + } + spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(t, &omap_timer_list, node) { if (t->pdev->id == id && !t->reserved) { @@ -237,6 +234,58 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) } EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); +/** + * omap_dm_timer_request_by_cap - Request a timer by capability + * @cap: Bit mask of capabilities to match + * + * Find a timer based upon capabilities bit mask. Callers of this function + * should use the definitions found in the plat/dmtimer.h file under the + * comment "timer capabilities used in hwmod database". Returns pointer to + * timer handle on success and a NULL pointer on failure. + */ +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap) +{ + struct omap_dm_timer *timer = NULL, *t; + unsigned long flags; + + if (!cap) + return NULL; + + spin_lock_irqsave(&dm_timer_lock, flags); + list_for_each_entry(t, &omap_timer_list, node) { + if ((!t->reserved) && ((t->capability & cap) == cap)) { + /* + * If timer is not NULL, we have already found one timer + * but it was not an exact match because it had more + * capabilites that what was required. Therefore, + * unreserve the last timer found and see if this one + * is a better match. + */ + if (timer) + timer->reserved = 0; + + timer = t; + timer->reserved = 1; + + /* Exit loop early if we find an exact match */ + if (t->capability == cap) + break; + } + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + if (timer && omap_dm_timer_prepare(timer)) { + timer->reserved = 0; + timer = NULL; + } + + if (!timer) + pr_debug("%s: timer request failed!\n", __func__); + + return timer; +} +EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap); + int omap_dm_timer_free(struct omap_dm_timer *timer) { if (unlikely(!timer)) @@ -271,7 +320,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer) EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); #if defined(CONFIG_ARCH_OMAP1) - +#include <mach/hardware.h> /** * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR * @inputmask: current value of idlect mask @@ -348,7 +397,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -377,9 +427,11 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); - if (!(timer->capability & OMAP_TIMER_ALWON)) - timer->ctx_loss_count = - omap_pm_get_dev_context_loss_count(&timer->pdev->dev); + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + } /* * Since the register values are computed and written within @@ -388,7 +440,6 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) */ timer->context.tclr = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - timer->context.tisr = __raw_readl(timer->irq_stat); omap_dm_timer_disable(timer); return 0; } @@ -398,7 +449,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int ret; char *parent_name = NULL; - struct clk *fclk, *parent; + struct clk *parent; struct dmtimer_platform_data *pdata; if (unlikely(!timer)) @@ -414,14 +465,11 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) * use the clock framework to set the parent clock. To be removed * once OMAP1 migrated to using clock framework for dmtimers */ - if (pdata->set_timer_src) + if (pdata && pdata->set_timer_src) return pdata->set_timer_src(timer->pdev, source); - fclk = clk_get(&timer->pdev->dev, "fck"); - if (IS_ERR_OR_NULL(fclk)) { - pr_err("%s: fck not found\n", __func__); + if (!timer->fclk) return -EINVAL; - } switch (source) { case OMAP_TIMER_SRC_SYS_CLK: @@ -440,18 +488,15 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) parent = clk_get(&timer->pdev->dev, parent_name); if (IS_ERR_OR_NULL(parent)) { pr_err("%s: %s not found\n", __func__, parent_name); - ret = -EINVAL; - goto out; + return -EINVAL; } - ret = clk_set_parent(fclk, parent); + ret = clk_set_parent(timer->fclk, parent); if (IS_ERR_VALUE(ret)) pr_err("%s: failed to set %s as parent\n", __func__, parent_name); clk_put(parent); -out: - clk_put(fclk); return ret; } @@ -495,7 +540,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -533,8 +579,8 @@ int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, l |= OMAP_TIMER_CTRL_CE; else l &= ~OMAP_TIMER_CTRL_CE; - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); /* Save the context */ timer->context.tclr = l; @@ -610,6 +656,37 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, } EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable); +/** + * omap_dm_timer_set_int_disable - disable timer interrupts + * @timer: pointer to timer handle + * @mask: bit mask of interrupts to be disabled + * + * Disables the specified timer interrupts for a timer. + */ +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask) +{ + u32 l = mask; + + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); + + if (timer->revision == 1) + l = __raw_readl(timer->irq_ena) & ~mask; + + __raw_writel(l, timer->irq_dis); + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask; + omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l); + + /* Save the context */ + timer->context.tier &= ~mask; + timer->context.twer &= ~mask; + omap_dm_timer_disable(timer); + return 0; +} +EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable); + unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) { unsigned int l; @@ -631,8 +708,7 @@ int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) return -EINVAL; __omap_dm_timer_write_status(timer, value); - /* Save the context */ - timer->context.tisr = value; + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_write_status); @@ -695,7 +771,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct dmtimer_platform_data *pdata = pdev->dev.platform_data; - if (!pdata) { + if (!pdata && !dev->of_node) { dev_err(dev, "%s: no platform data.\n", __func__); return -ENODEV; } @@ -724,11 +800,25 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) return -ENOMEM; } - timer->id = pdev->id; + if (dev->of_node) { + if (of_find_property(dev->of_node, "ti,timer-alwon", NULL)) + timer->capability |= OMAP_TIMER_ALWON; + if (of_find_property(dev->of_node, "ti,timer-dsp", NULL)) + timer->capability |= OMAP_TIMER_HAS_DSP_IRQ; + if (of_find_property(dev->of_node, "ti,timer-pwm", NULL)) + timer->capability |= OMAP_TIMER_HAS_PWM; + if (of_find_property(dev->of_node, "ti,timer-secure", NULL)) + timer->capability |= OMAP_TIMER_SECURE; + } else { + timer->id = pdev->id; + timer->errata = pdata->timer_errata; + timer->capability = pdata->timer_capability; + timer->reserved = omap_dm_timer_reserved_systimer(timer->id); + timer->get_context_loss_count = pdata->get_context_loss_count; + } + timer->irq = irq->start; - timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->pdev = pdev; - timer->capability = pdata->timer_capability; /* Skip pm_runtime_enable for OMAP1 */ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { @@ -768,7 +858,8 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(timer, &omap_timer_list, node) - if (timer->pdev->id == pdev->id) { + if (!strcmp(dev_name(&timer->pdev->dev), + dev_name(&pdev->dev))) { list_del(&timer->node); ret = 0; break; @@ -778,11 +869,18 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) return ret; } +static const struct of_device_id omap_timer_match[] = { + { .compatible = "ti,omap2-timer", }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_timer_match); + static struct platform_driver omap_dm_timer_driver = { .probe = omap_dm_timer_probe, .remove = __devexit_p(omap_dm_timer_remove), .driver = { .name = "omap_timer", + .of_match_table = of_match_ptr(omap_timer_match), }, }; diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index bcbb9d5dc293..3a77b30f53d4 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -30,9 +30,69 @@ #include <linux/io.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach/map.h> +#include <plat/cpu.h> + +#ifdef CONFIG_OMAP2_VRFB + +/* + * The first memory resource is the register region for VRFB, + * the rest are VRFB virtual memory areas for each VRFB context. + */ + +static const struct resource omap2_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), +}; + +static const struct resource omap3_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), + DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"), + DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"), + DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"), + DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"), + DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"), + DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"), + DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"), + DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"), +}; + +static int __init omap_init_vrfb(void) +{ + struct platform_device *pdev; + const struct resource *res; + unsigned int num_res; + + if (cpu_is_omap24xx()) { + res = omap2_vrfb_resources; + num_res = ARRAY_SIZE(omap2_vrfb_resources); + } else if (cpu_is_omap34xx()) { + res = omap3_vrfb_resources; + num_res = ARRAY_SIZE(omap3_vrfb_resources); + } else { + return 0; + } + + pdev = platform_device_register_resndata(NULL, "omapvrfb", -1, + res, num_res, NULL, 0); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + else + return 0; +} + +arch_initcall(omap_init_vrfb); +#endif + #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static bool omapfb_lcd_configured; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a5683a84c6ee..f9df624d108c 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,160 +26,18 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c-omap.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> -#include <mach/irqs.h> #include <plat/i2c.h> -#include <plat/omap_device.h> -#define OMAP_I2C_SIZE 0x3f -#define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP1_INT_I2C (32 + 4) - -static const char name[] = "omap_i2c"; - -#define I2C_RESOURCE_BUILDER(base, irq) \ - { \ - .start = (base), \ - .end = (base) + OMAP_I2C_SIZE, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = (irq), \ - .flags = IORESOURCE_IRQ, \ - }, - -static struct resource i2c_resources[][2] = { - { I2C_RESOURCE_BUILDER(0, 0) }, -}; - -#define I2C_DEV_BUILDER(bus_id, res, data) \ - { \ - .id = (bus_id), \ - .name = name, \ - .num_resources = ARRAY_SIZE(res), \ - .resource = (res), \ - .dev = { \ - .platform_data = (data), \ - }, \ - } - -#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 #define OMAP_I2C_MAX_CONTROLLERS 4 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; -static struct platform_device omap_i2c_devices[] = { - I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]), -}; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static int __init omap_i2c_nr_ports(void) -{ - int ports = 0; - - if (cpu_class_is_omap1()) - ports = 1; - else if (cpu_is_omap24xx()) - ports = 2; - else if (cpu_is_omap34xx()) - ports = 3; - else if (cpu_is_omap44xx()) - ports = 4; - - return ports; -} - -static inline int omap1_i2c_add_bus(int bus_id) -{ - struct platform_device *pdev; - struct omap_i2c_bus_platform_data *pdata; - struct resource *res; - - omap1_i2c_mux_pins(bus_id); - - pdev = &omap_i2c_devices[bus_id - 1]; - res = pdev->resource; - res[0].start = OMAP1_I2C_BASE; - res[0].end = res[0].start + OMAP_I2C_SIZE; - res[1].start = OMAP1_INT_I2C; - pdata = &i2c_pdata[bus_id - 1]; - - /* all OMAP1 have IP version 1 register set */ - pdata->rev = OMAP_I2C_IP_VERSION_1; - - /* all OMAP1 I2C are implemented like this */ - pdata->flags = OMAP_I2C_FLAG_NO_FIFO | - OMAP_I2C_FLAG_SIMPLE_CLOCK | - OMAP_I2C_FLAG_16BIT_DATA_REG | - OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; - - /* how the cpu bus is wired up differs for 7xx only */ - - if (cpu_is_omap7xx()) - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; - else - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; - - return platform_device_register(pdev); -} - - -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline int omap2_i2c_add_bus(int bus_id) -{ - int l; - struct omap_hwmod *oh; - struct platform_device *pdev; - char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; - struct omap_i2c_bus_platform_data *pdata; - struct omap_i2c_dev_attr *dev_attr; - - omap2_i2c_mux_pins(bus_id); - - l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); - WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, - "String buffer overflow in I2C%d device setup\n", bus_id); - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -EEXIST; - } - - pdata = &i2c_pdata[bus_id - 1]; - /* - * pass the hwmod class's CPU-specific knowledge of I2C IP revision in - * use, and functionality implementation flags, up to the OMAP I2C - * driver via platform data - */ - pdata->rev = oh->class->rev; - - dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; - pdata->flags = dev_attr->flags; - - pdev = omap_device_build(name, bus_id, oh, pdata, - sizeof(struct omap_i2c_bus_platform_data), - NULL, 0, 0); - WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - - return PTR_RET(pdev); -} -#else -static inline int omap2_i2c_add_bus(int bus_id) -{ - return 0; -} -#endif - -static int __init omap_i2c_add_bus(int bus_id) -{ - if (cpu_class_is_omap1()) - return omap1_i2c_add_bus(bus_id); - else - return omap2_i2c_add_bus(bus_id); -} - /** * omap_i2c_bus_setup - Process command line options for the I2C bus speed * @str: String of options @@ -193,12 +51,11 @@ static int __init omap_i2c_add_bus(int bus_id) */ static int __init omap_i2c_bus_setup(char *str) { - int ports; int ints[3]; - ports = omap_i2c_nr_ports(); get_options(str, 3, ints); - if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports) + if (ints[0] < 2 || ints[1] < 1 || + ints[1] > OMAP_I2C_MAX_CONTROLLERS) return 0; i2c_pdata[ints[1] - 1].clkrate = ints[2]; i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP; @@ -218,7 +75,7 @@ static int __init omap_register_i2c_bus_cmdline(void) for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++) if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) { i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - err = omap_i2c_add_bus(i + 1); + err = omap_i2c_add_bus(&i2c_pdata[i], i + 1); if (err) goto out; } @@ -243,7 +100,7 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, { int err; - BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports()); + BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS); if (info) { err = i2c_register_board_info(bus_id, info, len); @@ -256,5 +113,5 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - return omap_i2c_add_bus(bus_id); + return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id); } diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h index 0a87b052f8f7..6f506ba9e453 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/dma.h + * OMAP DMA handling defines and function * * Copyright (C) 2003 Nokia Corporation * Author: Juha Yrjölä <juha.yrjola@nokia.com> @@ -23,187 +23,8 @@ #include <linux/platform_device.h> -/* - * TODO: These dma channel defines should go away once all - * the omap drivers hwmod adapted. - */ - -/* Move omap4 specific defines to dma-44xx.h */ -#include "dma-44xx.h" - #define INT_DMA_LCD 25 -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -/* DMA channels for 24xx */ -#define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ -#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ -#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ -#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ -#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ -#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ -#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ -#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ -#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ -#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ - -#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ -#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ - -/* Only for AM35xx */ -#define AM35XX_DMA_UART4_TX 54 -#define AM35XX_DMA_UART4_RX 55 - -/*----------------------------------------------------------------------------*/ - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) @@ -309,10 +130,12 @@ #define SRC_PORT BIT(0x7) #define DST_PORT BIT(0x8) #define SRC_INDEX BIT(0x9) -#define DST_INDEX BIT(0xA) -#define IS_BURST_ONLY4 BIT(0xB) -#define CLEAR_CSR_ON_READ BIT(0xC) -#define IS_WORD_16 BIT(0xD) +#define DST_INDEX BIT(0xa) +#define IS_BURST_ONLY4 BIT(0xb) +#define CLEAR_CSR_ON_READ BIT(0xc) +#define IS_WORD_16 BIT(0xd) +#define ENABLE_16XX_MODE BIT(0xe) +#define HS_CHANNELS_RESERVED BIT(0xf) /* Defines for DMA Capabilities */ #define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) @@ -449,7 +272,15 @@ struct omap_system_dma_plat_info { u32 (*dma_read)(int reg, int lch); }; -extern void __init omap_init_consistent_dma_size(void); +#ifdef CONFIG_ARCH_OMAP2PLUS +#define dma_omap2plus() 1 +#else +#define dma_omap2plus() 0 +#endif +#define dma_omap1() (!dma_omap2plus()) +#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) +#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) + extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h deleted file mode 100644 index 025d85a3ee86..000000000000 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * clkdev <-> OMAP integration - * - * Russell King <linux@arm.linux.org.uk> - * - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H - -#include <linux/clkdev.h> - -struct omap_clk { - u16 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) /* 7xx, 850 */ -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ -#define CK_242X (1 << 4) -#define CK_243X (1 << 5) /* 243x, 253x */ -#define CK_3430ES1 (1 << 6) /* 34xxES1 only */ -#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */ -#define CK_AM35XX (1 << 9) /* Sitara AM35xx */ -#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ -#define CK_443X (1 << 11) -#define CK_TI816X (1 << 12) -#define CK_446X (1 << 13) -#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */ -#define CK_1710 (1 << 15) /* 1710 extra for rate selection */ - - -#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) - - -#endif - diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h deleted file mode 100644 index e2e2d045e428..000000000000 --- a/arch/arm/plat-omap/include/plat/clock.h +++ /dev/null @@ -1,309 +0,0 @@ -/* - * OMAP clock: data structure definitions, function prototypes, shared macros - * - * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -#include <linux/list.h> - -struct module; -struct clk; -struct clockdomain; - -/* Temporary, needed during the common clock framework conversion */ -#define __clk_get_name(clk) (clk->name) -#define __clk_get_parent(clk) (clk->parent) -#define __clk_get_rate(clk) (clk->rate) - -/** - * struct clkops - some clock function pointers - * @enable: fn ptr that enables the current clock in hardware - * @disable: fn ptr that enables the current clock in hardware - * @find_idlest: function returning the IDLEST register for the clock's IP blk - * @find_companion: function returning the "companion" clk reg for the clock - * @allow_idle: fn ptr that enables autoidle for the current clock in hardware - * @deny_idle: fn ptr that disables autoidle for the current clock in hardware - * - * A "companion" clk is an accompanying clock to the one being queried - * that must be enabled for the IP module connected to the clock to - * become accessible by the hardware. Neither @find_idlest nor - * @find_companion should be needed; that information is IP - * block-specific; the hwmod code has been created to handle this, but - * until hwmod data is ready and drivers have been converted to use PM - * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and - * @find_companion must, unfortunately, remain. - */ -struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); - void (*find_idlest)(struct clk *, void __iomem **, - u8 *, u8 *); - void (*find_companion)(struct clk *, void __iomem **, - u8 *); - void (*allow_idle)(struct clk *); - void (*deny_idle)(struct clk *); -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -/* struct clksel_rate.flags possibilities */ -#define RATE_IN_242X (1 << 0) -#define RATE_IN_243X (1 << 1) -#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ -#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ -#define RATE_IN_36XX (1 << 4) -#define RATE_IN_4430 (1 << 5) -#define RATE_IN_TI816X (1 << 6) -#define RATE_IN_4460 (1 << 7) -#define RATE_IN_AM33XX (1 << 8) -#define RATE_IN_TI814X (1 << 9) - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) -#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) -#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) -#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) - -/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ -#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) - - -/** - * struct clksel_rate - register bitfield values corresponding to clk divisors - * @val: register bitfield value (shifted to bit 0) - * @div: clock divisor corresponding to @val - * @flags: (see "struct clksel_rate.flags possibilities" above) - * - * @val should match the value of a read from struct clk.clksel_reg - * AND'ed with struct clk.clksel_mask, shifted right to bit 0. - * - * @div is the divisor that should be applied to the parent clock's rate - * to produce the current clock's rate. - */ -struct clksel_rate { - u32 val; - u8 div; - u16 flags; -}; - -/** - * struct clksel - available parent clocks, and a pointer to their divisors - * @parent: struct clk * to a possible parent clock - * @rates: available divisors for this parent clock - * - * A struct clksel is always associated with one or more struct clks - * and one or more struct clksel_rates. - */ -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - -/** - * struct dpll_data - DPLL registers and integration data - * @mult_div1_reg: register containing the DPLL M and N bitfields - * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg - * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg - * @clk_bypass: struct clk pointer to the clock's bypass clock input - * @clk_ref: struct clk pointer to the clock's reference clock input - * @control_reg: register containing the DPLL mode bitfield - * @enable_mask: mask of the DPLL mode bitfield in @control_reg - * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() - * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() - * @max_multiplier: maximum valid non-bypass multiplier value (actual) - * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() - * @min_divider: minimum valid non-bypass divider value (actual) - * @max_divider: maximum valid non-bypass divider value (actual) - * @modes: possible values of @enable_mask - * @autoidle_reg: register containing the DPLL autoidle mode bitfield - * @idlest_reg: register containing the DPLL idle status bitfield - * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg - * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg - * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg - * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg - * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs - * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs - * @flags: DPLL type/features (see below) - * - * Possible values for @flags: - * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) - * - * @freqsel_mask is only used on the OMAP34xx family and AM35xx. - * - * XXX Some DPLLs have multiple bypass inputs, so it's not technically - * correct to only have one @clk_bypass pointer. - * - * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, - * @last_rounded_n) should be separated from the runtime-fixed fields - * and placed into a different structure, so that the runtime-fixed data - * can be placed into read-only space. - */ -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - struct clk *clk_bypass; - struct clk *clk_ref; - void __iomem *control_reg; - u32 enable_mask; - unsigned long last_rounded_rate; - u16 last_rounded_m; - u16 max_multiplier; - u8 last_rounded_n; - u8 min_divider; - u16 max_divider; - u8 modes; - void __iomem *autoidle_reg; - void __iomem *idlest_reg; - u32 autoidle_mask; - u32 freqsel_mask; - u32 idlest_mask; - u32 dco_mask; - u32 sddiv_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; - u8 flags; -}; - -#endif - -/* - * struct clk.flags possibilities - * - * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. - */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) - -/** - * struct clk - OMAP struct clk - * @node: list_head connecting this clock into the full clock list - * @ops: struct clkops * for this clock - * @name: the name of the clock in the hardware (used in hwmod data and debug) - * @parent: pointer to this clock's parent struct clk - * @children: list_head connecting to the child clks' @sibling list_heads - * @sibling: list_head connecting this clk to its parent clk's @children - * @rate: current clock rate - * @enable_reg: register to write to enable the clock (see @enable_bit) - * @recalc: fn ptr that returns the clock's current rate - * @set_rate: fn ptr that can change the clock's current rate - * @round_rate: fn ptr that can round the clock's current rate - * @init: fn ptr to do clock-specific initialization - * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @usecount: number of users that have requested this clock to be enabled - * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div - * @flags: see "struct clk.flags possibilities" above - * @clksel_reg: for clksel clks, register va containing src/divisor select - * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector - * @clksel: for clksel clks, pointer to struct clksel for this clock - * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock - * @clkdm_name: clockdomain name that this clock is contained in - * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime - * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - * XXX @usecount is poorly named. It should be "enable_count" or - * something similar. "users" in the description refers to kernel - * code (core code or drivers) that have called clk_enable() and not - * yet called clk_disable(); the usecount of parent clocks is also - * incremented by the clock code when clk_enable() is called on child - * clocks and decremented by the clock code when clk_disable() is - * called on child clocks. - * - * XXX @clkdm, @usecount, @children, @sibling should be marked for - * internal use only. - * - * @children and @sibling are used to optimize parent-to-child clock - * tree traversals. (child-to-parent traversals use @parent.) - * - * XXX The notion of the clock's current rate probably needs to be - * separated from the clock's target rate. - */ -struct clk { - struct list_head node; - const struct clkops *ops; - const char *name; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ - unsigned long rate; - void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - u8 enable_bit; - s8 usecount; - u8 fixed_div; - u8 flags; -#ifdef CONFIG_ARCH_OMAP2PLUS - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; - const char *clkdm_name; - struct clockdomain *clkdm; -#else - u8 rate_offset; - u8 src_offset; -#endif -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -}; - -extern int mpurate; - -extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_reparent(struct clk *child, struct clk *parent); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern unsigned long followparent_recalc(struct clk *clk); -extern void clk_enable_init_clocks(void); -unsigned long omap_fixed_divisor_recalc(struct clk *clk); -extern struct clk *omap_clk_get_by_name(const char *name); -extern int omap_clk_enable_autoidle_all(void); -extern int omap_clk_disable_autoidle_all(void); - -extern const struct clkops clkops_null; - -extern struct clk dummy_ck; - -#endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h deleted file mode 100644 index d1cb6f527b7e..000000000000 --- a/arch/arm/plat-omap/include/plat/common.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/common.h - * - * Header for code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -#include <plat/i2c.h> -#include <plat/omap_hwmod.h> - -extern int __init omap_init_clocksource_32k(void __iomem *vbase); - -extern void __init omap_check_revision(void); - -extern void omap_reserve(void); -extern int omap_dss_reset(struct omap_hwmod *); - -void omap_sram_init(void); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h new file mode 100644 index 000000000000..da000d482ff2 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/counter-32k.h @@ -0,0 +1 @@ +int omap_init_clocksource_32k(void __iomem *vbase); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 67da857783ce..b4516aba67ed 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/cpu.h - * * OMAP cpu type detection * * Copyright (C) 2004, 2008 Nokia Corporation @@ -30,470 +28,12 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H -#ifndef __ASSEMBLY__ - -#include <linux/bitops.h> -#include <plat/multi.h> - -/* - * Omap device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - -int omap_type(void); - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Get the CPU revision for OMAP devices - */ -#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - * cpu_is_omap443x(): True for OMAP4430 - * cpu_is_omap446x(): True for OMAP4460 - * cpu_is_omap447x(): True for OMAP4470 - * soc_is_omap543x(): True for OMAP5430, OMAP5432 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_AM_CLASS(class, id) \ -static inline int is_am ##class (void) \ -{ \ - return (GET_AM_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_TI_CLASS(class, id) \ -static inline int is_ti ##class (void) \ -{ \ - return (GET_TI_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_TI_SUBCLASS(subclass, id) \ -static inline int is_ti ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_AM_SUBCLASS(subclass, id) \ -static inline int is_am ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) -IS_OMAP_CLASS(24xx, 0x24) -IS_OMAP_CLASS(34xx, 0x34) -IS_OMAP_CLASS(44xx, 0x44) -IS_AM_CLASS(35xx, 0x35) -IS_OMAP_CLASS(54xx, 0x54) -IS_AM_CLASS(33xx, 0x33) - -IS_TI_CLASS(81xx, 0x81) - -IS_OMAP_SUBCLASS(242x, 0x242) -IS_OMAP_SUBCLASS(243x, 0x243) -IS_OMAP_SUBCLASS(343x, 0x343) -IS_OMAP_SUBCLASS(363x, 0x363) -IS_OMAP_SUBCLASS(443x, 0x443) -IS_OMAP_SUBCLASS(446x, 0x446) -IS_OMAP_SUBCLASS(447x, 0x447) -IS_OMAP_SUBCLASS(543x, 0x543) - -IS_TI_SUBCLASS(816x, 0x816) -IS_TI_SUBCLASS(814x, 0x814) -IS_AM_SUBCLASS(335x, 0x335) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 -#define cpu_is_ti81xx() 0 -#define cpu_is_ti816x() 0 -#define cpu_is_ti814x() 0 -#define soc_is_am35xx() 0 -#define soc_is_am33xx() 0 -#define soc_is_am335x() 0 -#define cpu_is_omap44xx() 0 -#define cpu_is_omap443x() 0 -#define cpu_is_omap446x() 0 -#define cpu_is_omap447x() 0 -#define soc_is_omap54xx() 0 -#define soc_is_omap543x() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -#if defined(MULTI_OMAP2) -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() is_omap24xx() -# endif -# if defined (CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() is_omap242x() -# endif -# if defined (CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() is_omap243x() -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() -# endif -#else -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 -# endif -# if defined(CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap310(): True for OMAP310 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) -IS_OMAP_TYPE(2420, 0x2420) -IS_OMAP_TYPE(2422, 0x2422) -IS_OMAP_TYPE(2423, 0x2423) -IS_OMAP_TYPE(2430, 0x2430) -IS_OMAP_TYPE(3430, 0x3430) - -#define cpu_is_omap310() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 -#define cpu_is_omap3630() 0 -#define soc_is_omap5430() 0 - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 310 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() -#endif - -#if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap3430 -# undef cpu_is_ti81xx -# undef cpu_is_ti816x -# undef cpu_is_ti814x -# undef soc_is_am35xx -# define cpu_is_omap3430() is_omap3430() -# undef cpu_is_omap3630 -# define cpu_is_omap3630() is_omap363x() -# define cpu_is_ti81xx() is_ti81xx() -# define cpu_is_ti816x() is_ti816x() -# define cpu_is_ti814x() is_ti814x() -# define soc_is_am35xx() is_am35xx() +#ifdef CONFIG_ARCH_OMAP1 +#include <mach/soc.h> #endif -# if defined(CONFIG_SOC_AM33XX) -# undef soc_is_am33xx -# undef soc_is_am335x -# define soc_is_am33xx() is_am33xx() -# define soc_is_am335x() is_am335x() +#ifdef CONFIG_ARCH_OMAP2PLUS +#include "../../mach-omap2/soc.h" #endif -# if defined(CONFIG_ARCH_OMAP4) -# undef cpu_is_omap44xx -# undef cpu_is_omap443x -# undef cpu_is_omap446x -# undef cpu_is_omap447x -# define cpu_is_omap44xx() is_omap44xx() -# define cpu_is_omap443x() is_omap443x() -# define cpu_is_omap446x() is_omap446x() -# define cpu_is_omap447x() is_omap447x() -# endif - -# if defined(CONFIG_SOC_OMAP5) -# undef soc_is_omap54xx -# undef soc_is_omap543x -# define soc_is_omap54xx() is_omap54xx() -# define soc_is_omap543x() is_omap543x() -#endif - -/* Macros to detect if we have OMAP1 or OMAP2 */ -#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ - cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx() || \ - soc_is_am33xx()) - -/* Various silicon revisions for omap2 */ -#define OMAP242X_CLASS 0x24200024 -#define OMAP2420_REV_ES1_0 OMAP242X_CLASS -#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) - -#define OMAP243X_CLASS 0x24300024 -#define OMAP2430_REV_ES1_0 OMAP243X_CLASS - -#define OMAP343X_CLASS 0x34300034 -#define OMAP3430_REV_ES1_0 OMAP343X_CLASS -#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) -#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) -#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) -#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) -#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) - -#define OMAP363X_CLASS 0x36300034 -#define OMAP3630_REV_ES1_0 OMAP363X_CLASS -#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) -#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) - -#define TI816X_CLASS 0x81600034 -#define TI8168_REV_ES1_0 TI816X_CLASS -#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) - -#define TI814X_CLASS 0x81400034 -#define TI8148_REV_ES1_0 TI814X_CLASS -#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) -#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) - -#define AM35XX_CLASS 0x35170034 -#define AM35XX_REV_ES1_0 AM35XX_CLASS -#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) - -#define AM335X_CLASS 0x33500033 -#define AM335X_REV_ES1_0 AM335X_CLASS - -#define OMAP443X_CLASS 0x44300044 -#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) -#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) -#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) -#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) -#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) - -#define OMAP446X_CLASS 0x44600044 -#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) -#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8)) - -#define OMAP447X_CLASS 0x44700044 -#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) - -#define OMAP54XX_CLASS 0x54000054 -#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) -#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) - -void omap2xxx_check_revision(void); -void omap3xxx_check_revision(void); -void omap4xxx_check_revision(void); -void omap5xxx_check_revision(void); -void omap3xxx_check_features(void); -void ti81xx_check_features(void); -void omap4xxx_check_features(void); - -/* - * Runtime detection of OMAP3 features - * - * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip - * family have OS-level control over the I/O chain clock. This is - * to avoid a window during which wakeups could potentially be lost - * during powerdomain transitions. If this bit is set, it - * indicates that the chip does support OS-level control of this - * feature. - */ -extern u32 omap_features; - -#define OMAP3_HAS_L2CACHE BIT(0) -#define OMAP3_HAS_IVA BIT(1) -#define OMAP3_HAS_SGX BIT(2) -#define OMAP3_HAS_NEON BIT(3) -#define OMAP3_HAS_ISP BIT(4) -#define OMAP3_HAS_192MHZ_CLK BIT(5) -#define OMAP3_HAS_IO_WAKEUP BIT(6) -#define OMAP3_HAS_SDRC BIT(7) -#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) -#define OMAP4_HAS_MPU_1GHZ BIT(9) -#define OMAP4_HAS_MPU_1_2GHZ BIT(10) -#define OMAP4_HAS_MPU_1_5GHZ BIT(11) - - -#define OMAP3_HAS_FEATURE(feat,flag) \ -static inline unsigned int omap3_has_ ##feat(void) \ -{ \ - return omap_features & OMAP3_HAS_ ##flag; \ -} \ - -OMAP3_HAS_FEATURE(l2cache, L2CACHE) -OMAP3_HAS_FEATURE(sgx, SGX) -OMAP3_HAS_FEATURE(iva, IVA) -OMAP3_HAS_FEATURE(neon, NEON) -OMAP3_HAS_FEATURE(isp, ISP) -OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) -OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) -OMAP3_HAS_FEATURE(sdrc, SDRC) -OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) - -/* - * Runtime detection of OMAP4 features - */ -#define OMAP4_HAS_FEATURE(feat, flag) \ -static inline unsigned int omap4_has_ ##feat(void) \ -{ \ - return omap_features & OMAP4_HAS_ ##flag; \ -} \ - -OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) -OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) -OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) - -#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h index a4edbd2f7484..8fc4287222dd 100644 --- a/arch/arm/mach-omap2/debug-devices.h +++ b/arch/arm/plat-omap/include/plat/debug-devices.h @@ -1,9 +1,2 @@ -#ifndef _OMAP_DEBUG_DEVICES_H -#define _OMAP_DEBUG_DEVICES_H - -#include <linux/types.h> - /* for TI reference platforms sharing the same debug card */ extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h deleted file mode 100644 index 1f767cb2f38a..000000000000 --- a/arch/arm/plat-omap/include/plat/dma-44xx.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * OMAP4 SDMA channel definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * Paul Walmsley (paul@pwsan.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H - -#define OMAP44XX_DMA_SYS_REQ0 2 -#define OMAP44XX_DMA_SYS_REQ1 3 -#define OMAP44XX_DMA_GPMC 4 -#define OMAP44XX_DMA_DSS_DISPC_REQ 6 -#define OMAP44XX_DMA_SYS_REQ2 7 -#define OMAP44XX_DMA_MCASP1_AXEVT 8 -#define OMAP44XX_DMA_ISS_REQ1 9 -#define OMAP44XX_DMA_ISS_REQ2 10 -#define OMAP44XX_DMA_MCASP1_AREVT 11 -#define OMAP44XX_DMA_ISS_REQ3 12 -#define OMAP44XX_DMA_ISS_REQ4 13 -#define OMAP44XX_DMA_DSS_RFBI_REQ 14 -#define OMAP44XX_DMA_SPI3_TX0 15 -#define OMAP44XX_DMA_SPI3_RX0 16 -#define OMAP44XX_DMA_MCBSP2_TX 17 -#define OMAP44XX_DMA_MCBSP2_RX 18 -#define OMAP44XX_DMA_MCBSP3_TX 19 -#define OMAP44XX_DMA_MCBSP3_RX 20 -#define OMAP44XX_DMA_C2C_SSCM_GPO0 21 -#define OMAP44XX_DMA_C2C_SSCM_GPO1 22 -#define OMAP44XX_DMA_SPI3_TX1 23 -#define OMAP44XX_DMA_SPI3_RX1 24 -#define OMAP44XX_DMA_I2C3_TX 25 -#define OMAP44XX_DMA_I2C3_RX 26 -#define OMAP44XX_DMA_I2C1_TX 27 -#define OMAP44XX_DMA_I2C1_RX 28 -#define OMAP44XX_DMA_I2C2_TX 29 -#define OMAP44XX_DMA_I2C2_RX 30 -#define OMAP44XX_DMA_MCBSP4_TX 31 -#define OMAP44XX_DMA_MCBSP4_RX 32 -#define OMAP44XX_DMA_MCBSP1_TX 33 -#define OMAP44XX_DMA_MCBSP1_RX 34 -#define OMAP44XX_DMA_SPI1_TX0 35 -#define OMAP44XX_DMA_SPI1_RX0 36 -#define OMAP44XX_DMA_SPI1_TX1 37 -#define OMAP44XX_DMA_SPI1_RX1 38 -#define OMAP44XX_DMA_SPI1_TX2 39 -#define OMAP44XX_DMA_SPI1_RX2 40 -#define OMAP44XX_DMA_SPI1_TX3 41 -#define OMAP44XX_DMA_SPI1_RX3 42 -#define OMAP44XX_DMA_SPI2_TX0 43 -#define OMAP44XX_DMA_SPI2_RX0 44 -#define OMAP44XX_DMA_SPI2_TX1 45 -#define OMAP44XX_DMA_SPI2_RX1 46 -#define OMAP44XX_DMA_MMC2_TX 47 -#define OMAP44XX_DMA_MMC2_RX 48 -#define OMAP44XX_DMA_UART1_TX 49 -#define OMAP44XX_DMA_UART1_RX 50 -#define OMAP44XX_DMA_UART2_TX 51 -#define OMAP44XX_DMA_UART2_RX 52 -#define OMAP44XX_DMA_UART3_TX 53 -#define OMAP44XX_DMA_UART3_RX 54 -#define OMAP44XX_DMA_UART4_TX 55 -#define OMAP44XX_DMA_UART4_RX 56 -#define OMAP44XX_DMA_MMC4_TX 57 -#define OMAP44XX_DMA_MMC4_RX 58 -#define OMAP44XX_DMA_MMC5_TX 59 -#define OMAP44XX_DMA_MMC5_RX 60 -#define OMAP44XX_DMA_MMC1_TX 61 -#define OMAP44XX_DMA_MMC1_RX 62 -#define OMAP44XX_DMA_SYS_REQ3 64 -#define OMAP44XX_DMA_MCPDM_UP 65 -#define OMAP44XX_DMA_MCPDM_DL 66 -#define OMAP44XX_DMA_DMIC_REQ 67 -#define OMAP44XX_DMA_C2C_SSCM_GPO2 68 -#define OMAP44XX_DMA_C2C_SSCM_GPO3 69 -#define OMAP44XX_DMA_SPI4_TX0 70 -#define OMAP44XX_DMA_SPI4_RX0 71 -#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 -#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 -#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 -#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 -#define OMAP44XX_DMA_DSS_HDMI_REQ 76 -#define OMAP44XX_DMA_MMC3_TX 77 -#define OMAP44XX_DMA_MMC3_RX 78 -#define OMAP44XX_DMA_USIM_TX 79 -#define OMAP44XX_DMA_USIM_RX 80 -#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 -#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 -#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 -#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 -#define OMAP44XX_DMA_SLIMBUS1_TX0 85 -#define OMAP44XX_DMA_SLIMBUS1_TX1 86 -#define OMAP44XX_DMA_SLIMBUS1_TX2 87 -#define OMAP44XX_DMA_SLIMBUS1_TX3 88 -#define OMAP44XX_DMA_SLIMBUS1_RX0 89 -#define OMAP44XX_DMA_SLIMBUS1_RX1 90 -#define OMAP44XX_DMA_SLIMBUS1_RX2 91 -#define OMAP44XX_DMA_SLIMBUS1_RX3 92 -#define OMAP44XX_DMA_SLIMBUS2_TX0 93 -#define OMAP44XX_DMA_SLIMBUS2_TX1 94 -#define OMAP44XX_DMA_SLIMBUS2_TX2 95 -#define OMAP44XX_DMA_SLIMBUS2_TX3 96 -#define OMAP44XX_DMA_SLIMBUS2_RX0 97 -#define OMAP44XX_DMA_SLIMBUS2_RX1 98 -#define OMAP44XX_DMA_SLIMBUS2_RX2 99 -#define OMAP44XX_DMA_SLIMBUS2_RX3 100 -#define OMAP44XX_DMA_ABE_REQ_0 101 -#define OMAP44XX_DMA_ABE_REQ_1 102 -#define OMAP44XX_DMA_ABE_REQ_2 103 -#define OMAP44XX_DMA_ABE_REQ_3 104 -#define OMAP44XX_DMA_ABE_REQ_4 105 -#define OMAP44XX_DMA_ABE_REQ_5 106 -#define OMAP44XX_DMA_ABE_REQ_6 107 -#define OMAP44XX_DMA_ABE_REQ_7 108 -#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109 -#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110 -#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111 -#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112 -#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113 -#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114 -#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115 -#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116 -#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117 -#define OMAP44XX_DMA_SHA2_CTXIN_P 118 -#define OMAP44XX_DMA_SHA2_DIN_P 119 -#define OMAP44XX_DMA_SHA2_CTXOUT_P 120 -#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121 -#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122 -#define OMAP44XX_DMA_I2C4_TX 124 -#define OMAP44XX_DMA_I2C4_RX 125 - -#endif diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 85868e98c11c..05a36e16f3f4 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -32,7 +32,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/platform_device.h> @@ -55,6 +54,10 @@ #define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 +/* posted mode types */ +#define OMAP_TIMER_NONPOSTED 0x00 +#define OMAP_TIMER_POSTED 0x01 + /* timer capabilities used in hwmod database */ #define OMAP_TIMER_SECURE 0x80000000 #define OMAP_TIMER_ALWON 0x40000000 @@ -62,6 +65,16 @@ #define OMAP_TIMER_NEEDS_RESET 0x10000000 #define OMAP_TIMER_HAS_DSP_IRQ 0x08000000 +/* + * timer errata flags + * + * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This + * errata prevents us from using posted mode on these devices, unless the + * timer counter register is never read. For more details please refer to + * the OMAP3/4/5 errata documents. + */ +#define OMAP_TIMER_ERRATA_I103_I767 0x80000000 + struct omap_timer_capability_dev_attr { u32 timer_capability; }; @@ -70,8 +83,6 @@ struct omap_dm_timer; struct timer_regs { u32 tidr; - u32 tistat; - u32 tisr; u32 tier; u32 twer; u32 tclr; @@ -93,12 +104,15 @@ struct timer_regs { struct dmtimer_platform_data { /* set_timer_src - Only used for OMAP1 devices */ int (*set_timer_src)(struct platform_device *pdev, int source); + u32 timer_errata; u32 timer_capability; + int (*get_context_loss_count)(struct device *); }; int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap); int omap_dm_timer_free(struct omap_dm_timer *timer); void omap_dm_timer_enable(struct omap_dm_timer *timer); void omap_dm_timer_disable(struct omap_dm_timer *timer); @@ -120,6 +134,7 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, i int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask); unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); @@ -263,9 +278,11 @@ struct omap_dm_timer { unsigned reserved:1; unsigned posted:1; struct timer_regs context; + int (*get_context_loss_count)(struct device *); int ctx_loss_count; int revision; u32 capability; + u32 errata; struct platform_device *pdev; struct list_head node; }; @@ -304,7 +321,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) OMAP_TIMER_V1_SYS_STAT_OFFSET; timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; - timer->irq_dis = NULL; + timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET; timer->func_base = timer->io_base; } else { @@ -337,28 +354,46 @@ static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer, l |= 1 << 2; __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); - - /* Match hardware reset default of posted mode */ - __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, - OMAP_TIMER_CTRL_POSTED, 0); } -static inline int __omap_dm_timer_set_source(struct clk *timer_fck, - struct clk *parent) +/* + * __omap_dm_timer_enable_posted - enables write posted mode + * @timer: pointer to timer instance handle + * + * Enables the write posted mode for the timer. When posted mode is enabled + * writes to certain timer registers are immediately acknowledged by the + * internal bus and hence prevents stalling the CPU waiting for the write to + * complete. Enabling this feature can improve performance for writing to the + * timer registers. + */ +static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) { - int ret; + if (timer->posted) + return; - clk_disable(timer_fck); - ret = clk_set_parent(timer_fck, parent); - clk_enable(timer_fck); + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + return; - /* - * When the functional clock disappears, too quick writes seem - * to cause an abort. XXX Is this still necessary? - */ - __delay(300000); + __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, + OMAP_TIMER_CTRL_POSTED, 0); + timer->context.tsicr = OMAP_TIMER_CTRL_POSTED; + timer->posted = OMAP_TIMER_POSTED; +} - return ret; +/** + * __omap_dm_timer_override_errata - override errata flags for a timer + * @timer: pointer to timer handle + * @errata: errata flags to be ignored + * + * For a given timer, override a timer errata by clearing the flags + * specified by the errata argument. A specific erratum should only be + * overridden for a timer if the timer is used in such a way the erratum + * has no impact. + */ +static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer, + u32 errata) +{ + timer->errata &= ~errata; } static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h deleted file mode 100644 index bd3c6324ae1f..000000000000 --- a/arch/arm/plat-omap/include/plat/fpga.h +++ /dev/null @@ -1,193 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/fpga.h - * - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -extern void omap1510_fpga_init_irq(void); - -#define fpga_read(reg) __raw_readb(reg) -#define fpga_write(val, reg) __raw_writeb(val, reg) - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* PA */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) - -#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) -#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) -#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - -#endif diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 7c22b9e10dc3..7a9028cb5a75 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -18,11 +18,15 @@ * 02110-1301 USA * */ -#ifndef __ASM__ARCH_OMAP_I2C_H -#define __ASM__ARCH_OMAP_I2C_H -#include <linux/i2c.h> -#include <linux/i2c-omap.h> +#ifndef __PLAT_OMAP_I2C_H +#define __PLAT_OMAP_I2C_H + +struct i2c_board_info; +struct omap_i2c_bus_platform_data; + +int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, + int bus_id); #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, @@ -37,23 +41,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, } #endif -/** - * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod - * @fifo_depth: total controller FIFO size (in bytes) - * @flags: differences in hardware support capability - * - * @fifo_depth represents what exists on the hardware, not what is - * actually configured at runtime by the device driver. - */ -struct omap_i2c_dev_attr { - u8 fifo_depth; - u32 flags; -}; - -void __init omap1_i2c_mux_pins(int bus_id); -void __init omap2_i2c_mux_pins(int bus_id); - struct omap_hwmod; int omap_i2c_reset(struct omap_hwmod *oh); -#endif /* __ASM__ARCH_OMAP_I2C_H */ +#endif /* __PLAT_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/led.h b/arch/arm/plat-omap/include/plat/led.h deleted file mode 100644 index 25e451e7e2fd..000000000000 --- a/arch/arm/plat-omap/include/plat/led.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/led.h - * - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h deleted file mode 100644 index 4a970ec62dd1..000000000000 --- a/arch/arm/plat-omap/include/plat/menelaus.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/menelaus.h - * - * Functions to access Menelaus power management chip - */ - -#ifndef __ASM_ARCH_MENELAUS_H -#define __ASM_ARCH_MENELAUS_H - -struct device; - -struct menelaus_platform_data { - int (* late_init)(struct device *dev); -}; - -extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), - void *data); -extern void menelaus_unregister_mmc_callback(void); -extern int menelaus_set_mmc_opendrain(int slot, int enable); -extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); - -extern int menelaus_set_vmem(unsigned int mV); -extern int menelaus_set_vio(unsigned int mV); -extern int menelaus_set_vmmc(unsigned int mV); -extern int menelaus_set_vaux(unsigned int mV); -extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); -extern int menelaus_set_slot_sel(int enable); -extern int menelaus_get_slot_pin_states(void); -extern int menelaus_set_vcore_sw(unsigned int mV); -extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); - -#define EN_VPLL_SLEEP (1 << 7) -#define EN_VMMC_SLEEP (1 << 6) -#define EN_VAUX_SLEEP (1 << 5) -#define EN_VIO_SLEEP (1 << 4) -#define EN_VMEM_SLEEP (1 << 3) -#define EN_DC3_SLEEP (1 << 2) -#define EN_DC2_SLEEP (1 << 1) -#define EN_VC_SLEEP (1 << 0) - -extern int menelaus_set_regulator_sleep(int enable, u32 val); - -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS) -#define omap_has_menelaus() 1 -#else -#define omap_has_menelaus() 0 -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h deleted file mode 100644 index 8b4e4f2da2f5..000000000000 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * MMC definitions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_MMC_H -#define __OMAP2_MMC_H - -#include <linux/types.h> -#include <linux/device.h> -#include <linux/mmc/host.h> - -#include <plat/omap_hwmod.h> - -#define OMAP15XX_NR_MMC 1 -#define OMAP16XX_NR_MMC 2 -#define OMAP1_MMC_SIZE 0x080 -#define OMAP1_MMC1_BASE 0xfffb7800 -#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -#define OMAP24XX_NR_MMC 2 -#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE -#define OMAP2_MMC1_BASE 0x4809c000 - -#define OMAP4_MMC_REG_OFFSET 0x100 - -#define OMAP_MMC_MAX_SLOTS 2 - -/* - * struct omap_mmc_dev_attr.flags possibilities - * - * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can - * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag - * should be set if this is the case. See for example Section 22.5.3 - * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia - * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). - * - * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers - * don't work correctly on some MMC controller instances on some - * OMAP3 SoCs; this flag should be set if this is the case. See - * for example Advisory 2.1.1.128 "MMC: Multiple Block Read - * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ - * Revision F (October 2010) (SPRZ278F). - */ -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) -#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) - -struct omap_mmc_dev_attr { - u8 flags; -}; - -struct omap_mmc_platform_data { - /* back-link to device */ - struct device *dev; - - /* number of slots per controller */ - unsigned nr_slots:2; - - /* set if your board has components or wiring that limits the - * maximum frequency on the MMC bus */ - unsigned int max_freq; - - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); - /* initialize board-specific MMC functionality, can be NULL if - * not supported */ - int (*init)(struct device *dev); - void (*cleanup)(struct device *dev); - void (*shutdown)(struct device *dev); - - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); - - /* Integrating attributes from the omap_hwmod layer */ - u8 controller_flags; - - /* Register offset deviation */ - u16 reg_offset; - - struct omap_mmc_slot_data { - - /* - * 4/8 wires and any additional host capabilities - * need to OR'd all capabilities (ref. linux/mmc/host.h) - */ - u8 wires; /* Used for the MMC driver on omap1 and 2420 */ - u32 caps; /* Used for the MMC driver on 2430 and later */ - u32 pm_caps; /* PM capabilities of the mmc */ - - /* - * nomux means "standard" muxing is wrong on this board, and - * that board-specific code handled it before common init logic. - */ - unsigned nomux:1; - - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - - /* use the internal clock */ - unsigned internal_clock:1; - - /* nonremovable e.g. eMMC */ - unsigned nonremovable:1; - - /* Try to sleep or power off when possible */ - unsigned power_saving:1; - - /* If using power_saving and the MMC power is not to go off */ - unsigned no_off:1; - - /* eMMC does not handle power off when not in sleep state */ - unsigned no_regulator_off_init:1; - - /* Regulator off remapped to sleep */ - unsigned vcc_aux_disable_is_sleep:1; - - /* we can put the features above into this variable */ -#define HSMMC_HAS_PBIAS (1 << 0) -#define HSMMC_HAS_UPDATED_RESET (1 << 1) - unsigned features; - - int switch_pin; /* gpio (card detect) */ - int gpio_wp; /* gpio (write protect) */ - - int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); - int (*set_power)(struct device *dev, int slot, - int power_on, int vdd); - int (*get_ro)(struct device *dev, int slot); - void (*remux)(struct device *dev, int slot, int power_on); - /* Call back before enabling / disabling regulators */ - void (*before_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* Call back after enabling / disabling regulators */ - void (*after_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* if we have special card, init it using this callback */ - void (*init_card)(struct mmc_card *card); - - /* return MMC cover switch state, can be NULL if not supported. - * - * possible return values: - * 0 - closed - * 1 - open - */ - int (*get_cover_state)(struct device *dev, int slot); - - const char *name; - u32 ocr_mask; - - /* Card detection IRQs */ - int card_detect_irq; - int (*card_detect)(struct device *dev, int slot); - - unsigned int ban_openended:1; - - } slots[OMAP_MMC_MAX_SLOTS]; -}; - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, - int is_closed); - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); -void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -#else -static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} -static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ -} -#endif - -extern int omap_msdi_reset(struct omap_hwmod *oh); - -#endif diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h deleted file mode 100644 index 324d31b14852..000000000000 --- a/arch/arm/plat-omap/include/plat/multi.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Support for compiling in multiple OMAP processors - * - * Copyright (C) 2010 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __PLAT_OMAP_MULTI_H -#define __PLAT_OMAP_MULTI_H - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef MULTI_OMAP2 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS -# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2PLUS can't be selected at the same time" -# endif -#endif -#ifdef CONFIG_SOC_OMAP2420 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2420 -# endif -#endif -#ifdef CONFIG_SOC_OMAP2430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2430 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP3 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap3 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP4 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap4 -# endif -#endif - -#ifdef CONFIG_SOC_OMAP5 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap5 -# endif -#endif - -#ifdef CONFIG_SOC_AM33XX -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME am33xx -# endif -#endif - -#endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h deleted file mode 100644 index 0e4acd2d2deb..000000000000 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __OMAP_SECURE_H__ -#define __OMAP_SECURE_H__ - -#include <linux/types.h> - -extern int omap_secure_ram_reserve_memblock(void); - -#ifdef CONFIG_OMAP4_ERRATA_I688 -extern int omap_barrier_reserve_memblock(void); -#else -static inline void omap_barrier_reserve_memblock(void) -{ } -#endif -#endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index f4a4cd014795..1957a8516e93 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -40,10 +40,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x8 +#define OMAP_UART_SW_TX 0x04 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x2 +#define OMAP_UART_SW_RX 0x04 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h deleted file mode 100644 index 36d6a7666216..000000000000 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef ____ASM_ARCH_SDRC_H -#define ____ASM_ARCH_SDRC_H - -/* - * OMAP2/3 SDRC/SMS register definitions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Tony Lindgren - * Paul Walmsley - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ - -#define SDRC_SYSCONFIG 0x010 -#define SDRC_CS_CFG 0x040 -#define SDRC_SHARING 0x044 -#define SDRC_ERR_TYPE 0x04C -#define SDRC_DLLA_CTRL 0x060 -#define SDRC_DLLA_STATUS 0x064 -#define SDRC_DLLB_CTRL 0x068 -#define SDRC_DLLB_STATUS 0x06C -#define SDRC_POWER 0x070 -#define SDRC_MCFG_0 0x080 -#define SDRC_MR_0 0x084 -#define SDRC_EMR2_0 0x08c -#define SDRC_ACTIM_CTRL_A_0 0x09c -#define SDRC_ACTIM_CTRL_B_0 0x0a0 -#define SDRC_RFR_CTRL_0 0x0a4 -#define SDRC_MANUAL_0 0x0a8 -#define SDRC_MCFG_1 0x0B0 -#define SDRC_MR_1 0x0B4 -#define SDRC_EMR2_1 0x0BC -#define SDRC_ACTIM_CTRL_A_1 0x0C4 -#define SDRC_ACTIM_CTRL_B_1 0x0C8 -#define SDRC_RFR_CTRL_1 0x0D4 -#define SDRC_MANUAL_1 0x0D8 - -#define SDRC_POWER_AUTOCOUNT_SHIFT 8 -#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) -#define SDRC_POWER_CLKCTRL_SHIFT 4 -#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) -#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) - -/* - * These values represent the number of memory clock cycles between - * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 - * rows per device, and include a subtraction of a 50 cycle window in the - * event that the autorefresh command is delayed due to other SDRC activity. - * The '| 1' sets the ARE field to send one autorefresh when the autorefresh - * counter reaches 0. - * - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) -#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - - -/* - * SMS register access - */ - -#define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) - -/* SMS register offsets - read/write with sms_{read,write}_reg() */ - -#define SMS_SYSCONFIG 0x010 -#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) -#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) -#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) -/* REVISIT: fill in other SMS registers here */ - - -#ifndef __ASSEMBLER__ - -/** - * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate - * @rate: SDRC clock rate (in Hz) - * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate - * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate - * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate - * @mr: Value to program to SDRC_MR for this rate - * - * This structure holds a pre-computed set of register values for the - * SDRC for a given SDRC clock rate and SDRAM chip. These are - * intended to be pre-computed and specified in an array in the board-*.c - * files. The structure is keyed off the 'rate' field. - */ -struct omap_sdrc_params { - unsigned long rate; - u32 actim_ctrla; - u32 actim_ctrlb; - u32 rfr_ctrl; - u32 mr; -}; - -#ifdef CONFIG_SOC_HAS_OMAP2_SDRC -void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); -#else -static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1) {}; -#endif - -int omap2_sdrc_get_params(unsigned long r, - struct omap_sdrc_params **sdrc_cs0, - struct omap_sdrc_params **sdrc_cs1); -void omap2_sms_save_context(void); -void omap2_sms_restore_context(void); - -void omap2_sms_write_rot_control(u32 val, unsigned ctx); -void omap2_sms_write_rot_size(u32 val, unsigned ctx); -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); - -#ifdef CONFIG_ARCH_OMAP2 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - -extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); -struct omap_sdrc_params *rx51_get_sdram_timings(void); - -u32 omap2xxx_sdrc_dll_is_unlocked(void); -u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); - -#endif /* CONFIG_ARCH_OMAP2 */ - -#endif /* __ASSEMBLER__ */ - -#endif diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 227ae2657554..ba4525059a99 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -1,18 +1,8 @@ -/* - * arch/arm/plat-omap/include/mach/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +int omap_sram_init(void); -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -#ifndef __ASSEMBLY__ -#include <asm/fncpy.h> +void omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached); +void omap_sram_reset(void); extern void *omap_sram_push_address(unsigned long size); @@ -24,82 +14,3 @@ extern void *omap_sram_push_address(unsigned long size); _res = fncpy(_sram_address, &(funcp), size); \ _res; \ }) - -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern void omap3_sram_restore_context(void); - -/* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - -extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap24xx_sram_reprogram_clock_sz; - -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap242x_sram_ddr_init_sz; - -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap242x_sram_set_prcm_sz; - -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap242x_sram_reprogram_sdrc_sz; - - -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap243x_sram_ddr_init_sz; - -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap243x_sram_set_prcm_sz; - -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - -#ifdef CONFIG_PM -extern void omap_push_sram_idle(void); -#else -static inline void omap_push_sram_idle(void) {} -#endif /* CONFIG_PM */ - -#endif /* __ASSEMBLY__ */ - -/* - * OMAP2+: define the SRAM PA addresses. - * Used by the SRAM management code and the idle sleep code. - */ -#define OMAP2_SRAM_PA 0x40200000 -#define OMAP3_SRAM_PA 0x40200000 -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PA 0x40304000 -#define OMAP4_SRAM_VA 0xfe404000 -#else -#define OMAP4_SRAM_PA 0x40300000 -#endif -#define AM33XX_SRAM_PA 0x40300000 -#endif diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h deleted file mode 100644 index 7f7b112acccb..000000000000 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Rewritten by: - * Author: <source@mvista.com> - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include <asm/memory.h> -#include <asm/mach-types.h> - -#include <plat/serial.h> - -#define MDR1_MODE_MASK 0x07 - -volatile u8 *uart_base; -int uart_shift; - -/* - * Store the DEBUG_LL uart number into memory. - * See also debug-macro.S, and serial.c for related code. - */ -static void set_omap_uart_info(unsigned char port) -{ - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart_shift & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); - *uart_info = port; -} - -static void putc(int c) -{ - if (!uart_base) - return; - - /* Check for UART 16x mode */ - if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) - return; - - while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) - barrier(); - uart_base[UART_TX << uart_shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * Macros to configure UART1 and debug UART - */ -#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ - if (machine_is_##mach()) { \ - uart_base = (volatile u8 *)(dbg_uart); \ - uart_shift = (dbg_shft); \ - port = (dbg_id); \ - set_omap_uart_info(port); \ - break; \ - } - -#define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP2(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP2UART##p) - -#define DEBUG_LL_OMAP3(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP3UART##p) - -#define DEBUG_LL_OMAP4(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP4UART##p) - -#define DEBUG_LL_OMAP5(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP5UART##p) -/* Zoom2/3 shift is different for UART1 and external port */ -#define DEBUG_LL_ZOOM(mach) \ - _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) - -#define DEBUG_LL_TI81XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - TI81XXUART##p) - -#define DEBUG_LL_AM33XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - AM33XXUART##p) - -static inline void arch_decomp_setup(void) -{ - int port = 0; - - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* omap7xx/8xx based boards using UART1 with shift 0 */ - DEBUG_LL_OMAP7XX(1, herald); - DEBUG_LL_OMAP7XX(1, omap_perseus2); - - /* omap15xx/16xx based boards using UART1 */ - DEBUG_LL_OMAP1(1, ams_delta); - DEBUG_LL_OMAP1(1, nokia770); - DEBUG_LL_OMAP1(1, omap_h2); - DEBUG_LL_OMAP1(1, omap_h3); - DEBUG_LL_OMAP1(1, omap_innovator); - DEBUG_LL_OMAP1(1, omap_osk); - DEBUG_LL_OMAP1(1, omap_palmte); - DEBUG_LL_OMAP1(1, omap_palmz71); - - /* omap15xx/16xx based boards using UART2 */ - DEBUG_LL_OMAP1(2, omap_palmtt); - - /* omap15xx/16xx based boards using UART3 */ - DEBUG_LL_OMAP1(3, sx1); - - /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap_2430sdp); - DEBUG_LL_OMAP2(1, omap_apollon); - DEBUG_LL_OMAP2(1, omap_h4); - - /* omap2 based boards using UART3 */ - DEBUG_LL_OMAP2(3, nokia_n800); - DEBUG_LL_OMAP2(3, nokia_n810); - DEBUG_LL_OMAP2(3, nokia_n810_wimax); - - /* omap3 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap3evm); - DEBUG_LL_OMAP3(1, omap_3430sdp); - DEBUG_LL_OMAP3(1, omap_3630sdp); - DEBUG_LL_OMAP3(1, omap3530_lv_som); - DEBUG_LL_OMAP3(1, omap3_torpedo); - - /* omap3 based boards using UART3 */ - DEBUG_LL_OMAP3(3, cm_t35); - DEBUG_LL_OMAP3(3, cm_t3517); - DEBUG_LL_OMAP3(3, cm_t3730); - DEBUG_LL_OMAP3(3, craneboard); - DEBUG_LL_OMAP3(3, devkit8000); - DEBUG_LL_OMAP3(3, igep0020); - DEBUG_LL_OMAP3(3, igep0030); - DEBUG_LL_OMAP3(3, nokia_rm680); - DEBUG_LL_OMAP3(3, nokia_rm696); - DEBUG_LL_OMAP3(3, nokia_rx51); - DEBUG_LL_OMAP3(3, omap3517evm); - DEBUG_LL_OMAP3(3, omap3_beagle); - DEBUG_LL_OMAP3(3, omap3_pandora); - DEBUG_LL_OMAP3(3, omap_ldp); - DEBUG_LL_OMAP3(3, overo); - DEBUG_LL_OMAP3(3, touchbook); - - /* omap4 based boards using UART3 */ - DEBUG_LL_OMAP4(3, omap_4430sdp); - DEBUG_LL_OMAP4(3, omap4_panda); - - /* omap5 based boards using UART3 */ - DEBUG_LL_OMAP5(3, omap5_sevm); - - /* zoom2/3 external uart */ - DEBUG_LL_ZOOM(omap_zoom2); - DEBUG_LL_ZOOM(omap_zoom3); - - /* TI8168 base boards using UART3 */ - DEBUG_LL_TI81XX(3, ti8168evm); - - /* TI8148 base boards using UART1 */ - DEBUG_LL_TI81XX(1, ti8148evm); - - /* AM33XX base boards using UART1 */ - DEBUG_LL_AM33XX(1, am335xevm); - } while (0); -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h deleted file mode 100644 index 87ee140fefaa..000000000000 --- a/arch/arm/plat-omap/include/plat/usb.h +++ /dev/null @@ -1,179 +0,0 @@ -// include/asm-arm/mach-omap/usb.h - -#ifndef __ASM_ARCH_OMAP_USB_H -#define __ASM_ARCH_OMAP_USB_H - -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/usb/musb.h> - -#define OMAP3_HS_USB_PORTS 3 - -enum usbhs_omap_port_mode { - OMAP_USBHS_PORT_MODE_UNUSED, - OMAP_EHCI_PORT_MODE_PHY, - OMAP_EHCI_PORT_MODE_TLL, - OMAP_EHCI_PORT_MODE_HSIC, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM -}; - -struct usbhs_omap_board_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - /* have to be valid if phy_reset is true and portx is in phy mode */ - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* Set this to true for ES2.x silicon */ - unsigned es2_compatibility:1; - - unsigned phy_reset:1; - - /* - * Regulators for USB PHYs. - * Each PHY can have a separate regulator. - */ - struct regulator *regulator[OMAP3_HS_USB_PORTS]; -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -struct ehci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - struct regulator *regulator[OMAP3_HS_USB_PORTS]; - unsigned phy_reset:1; -}; - -struct ohci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - unsigned es2_compatibility:1; -}; - -struct usbhs_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - struct ehci_hcd_omap_platform_data *ehci_data; - struct ohci_hcd_omap_platform_data *ohci_data; -}; - -struct usbtll_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; -}; -/*-------------------------------------------------------------------------*/ - -struct omap_musb_board_data { - u8 interface_type; - u8 mode; - u16 power; - unsigned extvbus:1; - void (*set_phy_power)(u8 on); - void (*clear_irq)(void); - void (*set_mode)(u8 mode); - void (*reset)(void); -}; - -enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; - -extern void usb_musb_init(struct omap_musb_board_data *board_data); - -extern void usbhs_init(const struct usbhs_omap_board_data *pdata); -extern int omap_tll_enable(void); -extern int omap_tll_disable(void); - -extern int omap4430_phy_power(struct device *dev, int ID, int on); -extern int omap4430_phy_set_clk(struct device *dev, int on); -extern int omap4430_phy_init(struct device *dev); -extern int omap4430_phy_exit(struct device *dev); -extern int omap4430_phy_suspend(struct device *dev, int suspend); - -#endif - -extern void am35x_musb_reset(void); -extern void am35x_musb_phy_power(u8 on); -extern void am35x_musb_clear_irq(void); -extern void am35x_set_mode(u8 musb_mode); -extern void ti81xx_musb_phy_power(u8 on); - -/* AM35x */ -/* USB 2.0 PHY Control */ -#define CONF2_PHY_GPIOMODE (1 << 23) -#define CONF2_OTGMODE (3 << 14) -#define CONF2_NO_OVERRIDE (0 << 14) -#define CONF2_FORCE_HOST (1 << 14) -#define CONF2_FORCE_DEVICE (2 << 14) -#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) -#define CONF2_SESENDEN (1 << 13) -#define CONF2_VBDTCTEN (1 << 12) -#define CONF2_REFFREQ_24MHZ (2 << 8) -#define CONF2_REFFREQ_26MHZ (7 << 8) -#define CONF2_REFFREQ_13MHZ (6 << 8) -#define CONF2_REFFREQ (0xf << 8) -#define CONF2_PHYCLKGD (1 << 7) -#define CONF2_VBUSSENSE (1 << 6) -#define CONF2_PHY_PLLON (1 << 5) -#define CONF2_RESET (1 << 4) -#define CONF2_PHYPWRDN (1 << 3) -#define CONF2_OTGPWRDN (1 << 2) -#define CONF2_DATPOL (1 << 1) - -/* TI81XX specific definitions */ -#define USBCTRL0 0x620 -#define USBSTAT0 0x624 - -/* TI816X PHY controls bits */ -#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) -#define TI816X_USBPHY_REFCLK_OSC (1 << 8) - -/* TI814X PHY controls bits */ -#define USBPHY_CM_PWRDN (1 << 0) -#define USBPHY_OTG_PWRDN (1 << 1) -#define USBPHY_CHGDET_DIS (1 << 2) -#define USBPHY_CHGDET_RSTRT (1 << 3) -#define USBPHY_SRCONDM (1 << 4) -#define USBPHY_SINKONDP (1 << 5) -#define USBPHY_CHGISINK_EN (1 << 6) -#define USBPHY_CHGVSRC_EN (1 << 7) -#define USBPHY_DMPULLUP (1 << 8) -#define USBPHY_DPPULLUP (1 << 9) -#define USBPHY_CDET_EXTCTL (1 << 10) -#define USBPHY_GPIO_MODE (1 << 12) -#define USBPHY_DPOPBUFCTL (1 << 13) -#define USBPHY_DMOPBUFCTL (1 << 14) -#define USBPHY_DPINPUT (1 << 15) -#define USBPHY_DMINPUT (1 << 16) -#define USBPHY_DPGPIO_PD (1 << 17) -#define USBPHY_DMGPIO_PD (1 << 18) -#define USBPHY_OTGVDET_EN (1 << 19) -#define USBPHY_OTGSESSEND_EN (1 << 20) -#define USBPHY_DATA_POLARITY (1 << 23) - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) -u32 omap1_usb0_init(unsigned nwires, unsigned is_device); -u32 omap1_usb1_init(unsigned nwires); -u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup); -#else -static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device) -{ - return 0; -} -static inline u32 omap1_usb1_init(unsigned nwires) -{ - return 0; - -} -static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h deleted file mode 100644 index 3792bdea2f6d..000000000000 --- a/arch/arm/plat-omap/include/plat/vrfb.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * VRFB Rotation Engine - * - * Copyright (C) 2009 Nokia Corporation - * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAP_VRFB_H__ -#define __OMAP_VRFB_H__ - -#define OMAP_VRFB_LINE_LEN 2048 - -struct vrfb { - u8 context; - void __iomem *vaddr[4]; - unsigned long paddr[4]; - u16 xres; - u16 yres; - u16 xoffset; - u16 yoffset; - u8 bytespp; - bool yuv_mode; -}; - -#ifdef CONFIG_OMAP2_VRFB -extern int omap_vrfb_request_ctx(struct vrfb *vrfb); -extern void omap_vrfb_release_ctx(struct vrfb *vrfb); -extern void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp); -extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); -extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); -extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, - unsigned bytespp, bool yuv_mode); -extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); -extern void omap_vrfb_restore_context(void); - -#else -static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; } -static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {} -static inline void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp) {} -static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp) - { return 0; } -static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp) - { return 0; } -static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, unsigned bytespp, bool yuv_mode) {} -static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot) - { return 0; } -static inline void omap_vrfb_restore_context(void) {} -#endif -#endif /* __VRFB_H */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 28acb383e7df..743fc2836f7a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,198 +20,20 @@ #include <linux/init.h> #include <linux/io.h> +#include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include <plat/sram.h> -#include <plat/cpu.h> - -#include "sram.h" - -/* XXX These "sideways" includes will disappear when sram.c becomes a driver */ -#include "../mach-omap2/iomap.h" -#include "../mach-omap2/prm2xxx_3xxx.h" -#include "../mach-omap2/sdrc.h" - -#define OMAP1_SRAM_PA 0x20000000 -#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) -#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA -#else -#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#endif -#define OMAP5_SRAM_PA 0x40300000 - -#if defined(CONFIG_ARCH_OMAP2PLUS) -#define SRAM_BOOTLOADER_SZ 0x00 -#else -#define SRAM_BOOTLOADER_SZ 0x80 -#endif - -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) - -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) - -#define GP_DEVICE 0x300 - #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) -static unsigned long omap_sram_start; static void __iomem *omap_sram_base; static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; /* - * Depending on the target RAMFS firewall setup, the public usable amount of - * SRAM varies. The default accessible size for all device types is 2k. A GP - * device allows ARM11 but not other initiators for full size. This - * functionality seems ok until some nice security API happens. - */ -static int is_sram_locked(void) -{ - if (OMAP2_DEVICE_TYPE_GP == omap_type()) { - /* RAMFW: R/W access to all initiators for all qualifier sets */ - if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ - } - if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); - } - return 0; - } else - return 1; /* assume locked with no PPA or security driver */ -} - -/* - * The amount of SRAM depends on the core type. - * Note that we cannot try to test for SRAM here because writes - * to secure SRAM will hang the system. Also the SRAM is not - * yet mapped at this point. - */ -static void __init omap_detect_sram(void) -{ - omap_sram_skip = SRAM_BOOTLOADER_SZ; - if (cpu_class_is_omap2()) { - if (is_sram_locked()) { - if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PUB_PA; - if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || - (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { - omap_sram_size = 0x7000; /* 28K */ - omap_sram_skip += SZ_16K; - } else { - omap_sram_size = 0x8000; /* 32K */ - } - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PUB_PA; - omap_sram_size = 0xa000; /* 40K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PUB_PA; - omap_sram_size = 0x800; /* 2K */ - } - } else { - if (soc_is_am33xx()) { - omap_sram_start = AM33XX_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0xe000; /* 56K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PA; - if (cpu_is_omap242x()) - omap_sram_size = 0xa0000; /* 640K */ - else if (cpu_is_omap243x()) - omap_sram_size = 0x10000; /* 64K */ - } - } - } else { - omap_sram_start = OMAP1_SRAM_PA; - - if (cpu_is_omap7xx()) - omap_sram_size = 0x32000; /* 200K */ - else if (cpu_is_omap15xx()) - omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1611() || - cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; /* 16K */ - else { - pr_err("Could not detect SRAM size\n"); - omap_sram_size = 0x4000; - } - } -} - -/* - * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. - */ -static void __init omap_map_sram(void) -{ - int cached = 1; - - if (omap_sram_size == 0) - return; - -#ifdef CONFIG_OMAP4_ERRATA_I688 - if (cpu_is_omap44xx()) { - omap_sram_start += PAGE_SIZE; - omap_sram_size -= SZ_16K; - } -#endif - if (cpu_is_omap34xx()) { - /* - * SRAM must be marked as non-cached on OMAP3 since the - * CORE DPLL M2 divider change code (in SRAM) runs with the - * SDRAM controller disabled, and if it is marked cached, - * the ARM may attempt to write cache lines back to SDRAM - * which will cause the system to hang. - */ - cached = 0; - } - - omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); - omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, - cached); - if (!omap_sram_base) { - pr_err("SRAM: Could not map\n"); - return; - } - - omap_sram_ceil = omap_sram_base + omap_sram_size; - - /* - * Looks like we need to preserve some bootloader code at the - * beginning of SRAM for jumping to flash for reboot to work... - */ - memset_io(omap_sram_base + omap_sram_skip, 0, - omap_sram_size - omap_sram_skip); -} - -/* * Memory allocator for SRAM: calculates the new ceiling address * for pushing a function using the fncpy API. * @@ -236,171 +58,39 @@ void *omap_sram_push_address(unsigned long size) return (void *)omap_sram_ceil; } -#ifdef CONFIG_ARCH_OMAP1 - -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - BUG_ON(!_omap_sram_reprogram_clock); - /* On 730, bit 13 must always be 1 */ - if (cpu_is_omap7xx()) - ckctl |= 0x2000; - _omap_sram_reprogram_clock(dpllctl, ckctl); -} - -static int __init omap1_sram_init(void) -{ - _omap_sram_reprogram_clock = - omap_sram_push(omap1_sram_reprogram_clock, - omap1_sram_reprogram_clock_sz); - - return 0; -} - -#else -#define omap1_sram_init() do {} while (0) -#endif - -#if defined(CONFIG_ARCH_OMAP2) - -static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); - -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ - BUG_ON(!_omap2_sram_ddr_init); - _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, - base_cs, force_unlock); -} - -static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, - u32 mem_type); - -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) -{ - BUG_ON(!_omap2_sram_reprogram_sdrc); - _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); -} - -static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) -{ - BUG_ON(!_omap2_set_prcm); - return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); -} -#endif - -#ifdef CONFIG_SOC_OMAP2420 -static int __init omap242x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, - omap242x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, - omap242x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, - omap242x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap242x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -static int __init omap243x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, - omap243x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, - omap243x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, - omap243x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap243x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 - -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - -void omap3_sram_restore_context(void) +/* + * The SRAM context is lost during off-idle and stack + * needs to be reset. + */ +void omap_sram_reset(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); } -static inline int omap34xx_sram_init(void) -{ - omap3_sram_restore_context(); - return 0; -} -#else -static inline int omap34xx_sram_init(void) -{ - return 0; -} -#endif /* CONFIG_ARCH_OMAP3 */ - -static inline int am33xx_sram_init(void) +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +void __init omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached) { - return 0; -} + if (size == 0) + return; -int __init omap_sram_init(void) -{ - omap_detect_sram(); - omap_map_sram(); + start = ROUND_DOWN(start, PAGE_SIZE); + omap_sram_size = size; + omap_sram_skip = skip; + omap_sram_base = __arm_ioremap_exec(start, size, cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } - if (!(cpu_class_is_omap2())) - omap1_sram_init(); - else if (cpu_is_omap242x()) - omap242x_sram_init(); - else if (cpu_is_omap2430()) - omap243x_sram_init(); - else if (soc_is_am33xx()) - am33xx_sram_init(); - else if (cpu_is_omap34xx()) - omap34xx_sram_init(); + omap_sram_reset(); - return 0; + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h deleted file mode 100644 index 29b43ef97f20..000000000000 --- a/arch/arm/plat-omap/sram.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __PLAT_OMAP_SRAM_H__ -#define __PLAT_OMAP_SRAM_H__ - -extern int __init omap_sram_init(void); - -#endif /* __PLAT_OMAP_SRAM_H__ */ diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h new file mode 100644 index 000000000000..0b9428ab3fc3 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/spi-core.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_S3C_SPI_CORE_H +#define __PLAT_S3C_SPI_CORE_H + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c64xx_spi_setname(char *name) +{ +#ifdef CONFIG_S3C64XX_DEV_SPI0 + s3c64xx_device_spi0.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI1 + s3c64xx_device_spi1.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI2 + s3c64xx_device_spi2.name = name; +#endif +} + +#endif /* __PLAT_S3C_SPI_CORE_H */ diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 635cb1865e4d..cd60a81163e9 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - @echo ' Generating $@' + $(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c index dbd1330c0196..859a9bb002d5 100644 --- a/arch/arm/xen/grant-table.c +++ b/arch/arm/xen/grant-table.c @@ -33,7 +33,7 @@ #include <xen/page.h> #include <xen/grant_table.h> -int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, +int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes, unsigned long max_nr_gframes, void **__shared) { diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 074f5ed101b9..71f723984cbd 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -48,20 +48,16 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/opcodes-virt.h> #include <xen/interface/xen.h> -/* HVC 0xEA1 */ -#ifdef CONFIG_THUMB2_KERNEL -#define xen_hvc .word 0xf7e08ea1 -#else -#define xen_hvc .word 0xe140ea71 -#endif +#define XEN_IMM 0xEA1 #define HYPERCALL_SIMPLE(hypercall) \ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc; \ + __HVC(XEN_IMM); \ mov pc, lr; \ ENDPROC(HYPERVISOR_##hypercall) @@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall) \ stmdb sp!, {r4} \ ldr r4, [sp, #4] \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc \ + __HVC(XEN_IMM); \ ldm sp!, {r4} \ mov pc, lr \ ENDPROC(HYPERVISOR_##hypercall) @@ -100,7 +96,7 @@ ENTRY(privcmd_call) mov r2, r3 ldr r3, [sp, #8] ldr r4, [sp, #4] - xen_hvc + __HVC(XEN_IMM) ldm sp!, {r4} mov pc, lr ENDPROC(privcmd_call); |
