diff options
Diffstat (limited to 'arch/arm')
123 files changed, 855 insertions, 818 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b63902e7cacd..11680092e407 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -49,7 +49,6 @@ config ARM select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 - select HAVE_VIRT_TO_BUS select KTIME_SCALAR select PERF_USE_VMALLOC select RTC_LIB @@ -556,7 +555,6 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK_DOVE select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI @@ -744,6 +742,7 @@ config ARCH_RPC select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NO_IOPORT + select VIRT_TO_BUS help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -879,6 +878,7 @@ config ARCH_SHARK select ISA_DMA select NEED_MACH_MEMORY_H select PCI + select VIRT_TO_BUS select ZONE_DMA help Support for the StrongARM based Digital DNARD machine, also known @@ -1006,12 +1006,12 @@ config ARCH_MULTI_V4_V5 bool config ARCH_MULTI_V6 - bool "ARMv6 based platforms (ARM11, Scorpion, ...)" + bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 select CPU_V6 config ARCH_MULTI_V7 - bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" + bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select ARCH_VEXPRESS @@ -1462,10 +1462,6 @@ config ISA_DMA bool select ISA_DMA_API -config ARCH_NO_VIRT_TO_BUS - def_bool y - depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK - # Select ISA DMA interface config ISA_DMA_API bool @@ -1597,6 +1593,7 @@ config HAVE_ARM_ARCH_TIMER config HAVE_ARM_TWD bool depends on SMP + select CLKSRC_OF if OF help This options enables support for the ARM timer and watchdog unit @@ -1657,13 +1654,16 @@ config LOCAL_TIMERS accounting to be spread across the timer interval, preventing a "thundering herd" at every timer tick. +# The GPIO number here must be sorted by descending number. In case of +# a multiplatform kernel, we just want the highest value required by the +# selected platforms. config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 355 if ARCH_U8500 - default 264 if MACH_H4700 default 512 if SOC_OMAP5 + default 355 if ARCH_U8500 default 288 if ARCH_VT8500 || ARCH_SUNXI + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. @@ -1887,8 +1887,9 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" - depends on ARM && OF + depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 + depends on !GENERIC_ATOMIC64 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index acddddac7ee4..9b31f4311ea2 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -492,9 +492,10 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX50_IMX53_UART || \ + DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART default 1 + depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 71768b8a1ab9..84aa2caf07ed 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -115,4 +115,4 @@ i: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image System.map "$(INSTALL_PATH)" -subdir- := bootp compressed +subdir- := bootp compressed dts diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index f8e4855bc9a5..070bba4f2585 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -64,5 +64,13 @@ status = "okay"; /* No CD or WP GPIOs */ }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 6f1acc75e155..5b708208b607 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -31,7 +31,6 @@ mpic: interrupt-controller@d0020000 { compatible = "marvell,mpic"; #interrupt-cells = <1>; - #address-cells = <1>; #size-cells = <1>; interrupt-controller; }; @@ -54,7 +53,7 @@ reg = <0xd0012000 0x100>; reg-shift = <2>; interrupts = <41>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012100 { @@ -62,7 +61,7 @@ reg = <0xd0012100 0x100>; reg-shift = <2>; interrupts = <42>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 1443949c165e..ca00d8326c87 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -46,7 +46,7 @@ reg = <0xd0012200 0x100>; reg-shift = <2>; interrupts = <43>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012300 { @@ -54,7 +54,7 @@ reg = <0xd0012300 0x100>; reg-shift = <2>; interrupts = <44>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index aa98e641931f..a98c0d50fbbe 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -238,8 +238,32 @@ nand { pinctrl_nand: nand-0 { atmel,pins = - <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */ - 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + <3 0 0x1 0x0 /* PD0 periph A Read Enable */ + 3 1 0x1 0x0 /* PD1 periph A Write Enable */ + 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ + 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ + 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ + 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ + 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ + 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ + 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ + 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ + 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ + 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ + 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ + 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + }; + + pinctrl_nand_16bits: nand_16bits-0 { + atmel,pins = + <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ + 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ + 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ + 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ + 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ + 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ + 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ + 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ }; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 4bf2a8774aa7..7e0481e2441a 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -105,7 +105,7 @@ compatible = "fixed-clock"; reg = <1>; #clock-cells = <0>; - clock-frequency = <150000000>; + clock-frequency = <250000000>; }; }; }; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 69140ba99f46..9de93096601a 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -319,9 +319,8 @@ }; }; - ab8500@5 { + ab8500 { compatible = "stericsson,ab8500"; - reg = <5>; /* mailbox 5 is i2c */ interrupt-parent = <&intc>; interrupts = <0 40 0x4>; interrupt-controller; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 67dbe20868a2..f7509cafc377 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -197,6 +197,11 @@ status = "disabled"; }; + rtc@d8500 { + compatible = "marvell,orion-rtc"; + reg = <0xd8500 0x20>; + }; + crypto: crypto@30000 { compatible = "marvell,orion-crypto"; reg = <0x30000 0x10000>, diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e1347fceb5bc..1a62bcf18aa3 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -275,18 +275,27 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; interrupts = <0 36 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; mdma1: mdma@12850000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 5f3562ad6746..9a99755920c0 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -142,12 +142,18 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; }; diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index 592fb9dc35bd..379128eb9d98 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -221,7 +221,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 55f4191a626e..2b587a74b813 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -158,7 +158,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index e54fffd48369..468c0a1d48d9 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -42,10 +42,9 @@ fsl,pins = <689 0x10000 /* DISP1_DRDY */ 482 0x10000 /* DISP1_HSYNC */ 489 0x10000 /* DISP1_VSYNC */ - 684 0x10000 /* DISP1_DAT_0 */ 515 0x10000 /* DISP1_DAT_22 */ 523 0x10000 /* DISP1_DAT_23 */ - 543 0x10000 /* DISP1_DAT_21 */ + 545 0x10000 /* DISP1_DAT_21 */ 553 0x10000 /* DISP1_DAT_20 */ 558 0x10000 /* DISP1_DAT_19 */ 564 0x10000 /* DISP1_DAT_18 */ diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 5bb0bf39d3b8..c9c44b2f62d7 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -42,12 +42,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; serial@12100 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index d430713ea9b9..e4e4930dc5cf 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -50,7 +50,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 2e3dd34e21a5..0196cf6b0ef2 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -37,7 +37,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index ef2d8c705709..289e51d86372 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -38,7 +38,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 1b133e0c566e..bd83b8fc7c83 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -73,7 +73,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 71902da33d63..5335b1aa8601 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -51,7 +51,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 504f16be8b54..12ccf74ac3c4 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -78,7 +78,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 6cae4599c4b3..93c3afbef9ee 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -115,7 +115,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 8db3123ac80f..5bbd0542cdd3 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -34,7 +34,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts index 9510c9ea666c..9f55d95f35f5 100644 --- a/arch/arm/boot/dts/kirkwood-lschlv2.dts +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts index 739019c4cba9..5c84c118ed8d 100644 --- a/arch/arm/boot/dts/kirkwood-lsxhl.dts +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 662dfd81b1ce..758824118a9a 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -90,7 +90,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index e8e7ecef1650..6affd924fe11 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -23,7 +23,6 @@ }; serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 3a178cf708d7..a7412b937a8a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -117,7 +117,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index ede7fe0d7a87..d27f7245f8e7 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -18,12 +18,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; serial@12100 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 842ff95d60df..66eb45b00b25 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -108,7 +108,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 2c738d9dc82a..fada7e6d24d8 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -38,6 +38,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; + clocks = <&gate_clk 7>; }; gpio1: gpio@10140 { @@ -49,6 +50,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; + clocks = <&gate_clk 7>; }; serial@12000 { @@ -57,7 +59,6 @@ reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -67,7 +68,6 @@ reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -75,6 +75,7 @@ compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; + clocks = <&gate_clk 7>; }; spi@10600 { diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5a3a58b7e18f..0077fc8510b7 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -11,7 +11,7 @@ / { model = "LaCie Ethernet Disk mini V2"; - compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { reg = <0x00000000 0x4000000>; /* 64 MB */ diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 27f31a5fa494..d3ec32f6b790 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -298,7 +298,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 936d2306e7e1..7e8769bd5977 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -75,6 +75,9 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0xffe01000 0x1000>; interrupts = <0 180 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9a428931d042..3d3f64d2111a 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -118,6 +118,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0x304>; + clocks = <&tegra_car 132>; }; intc: interrupt-controller { @@ -384,7 +385,7 @@ spi@7000d800 { compatible = "nvidia,tegra20-slink"; - reg = <0x7000d480 0x200>; + reg = <0x7000d800 0x200>; interrupts = <0 83 0x04>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 767803e1fd55..dbf46c272562 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -119,6 +119,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0xf04>; + clocks = <&tegra_car 214>; }; intc: interrupt-controller { @@ -371,7 +372,7 @@ spi@7000d800 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; - reg = <0x7000d480 0x200>; + reg = <0x7000d800 0x200>; interrupts = <0 83 0x04>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 5914b5654591..2a1df1bc4b99 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -111,56 +111,30 @@ }; ttc0: ttc0@f8001000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,ttc"; + interrupt-parent = <&intc>; + interrupts = < 0 10 4 0 11 4 0 12 4 >; + compatible = "cdns,ttc"; reg = <0xF8001000 0x1000>; clocks = <&cpu_clk 3>; clock-names = "cpu_1x"; clock-ranges; - - ttc0_0: ttc0.0 { - status = "disabled"; - reg = <0>; - interrupts = <0 10 4>; - }; - ttc0_1: ttc0.1 { - status = "disabled"; - reg = <1>; - interrupts = <0 11 4>; - }; - ttc0_2: ttc0.2 { - status = "disabled"; - reg = <2>; - interrupts = <0 12 4>; - }; }; ttc1: ttc1@f8002000 { - #interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,ttc"; + interrupt-parent = <&intc>; + interrupts = < 0 37 4 0 38 4 0 39 4 >; + compatible = "cdns,ttc"; reg = <0xF8002000 0x1000>; clocks = <&cpu_clk 3>; clock-names = "cpu_1x"; clock-ranges; - - ttc1_0: ttc1.0 { - status = "disabled"; - reg = <0>; - interrupts = <0 37 4>; - }; - ttc1_1: ttc1.1 { - status = "disabled"; - reg = <1>; - interrupts = <0 38 4>; - }; - ttc1_2: ttc1.2 { - status = "disabled"; - reg = <2>; - interrupts = <0 39 4>; - }; }; + scutimer: scutimer@f8f00600 { + interrupt-parent = <&intc>; + interrupts = < 1 13 0x301 >; + compatible = "arm,cortex-a9-twd-timer"; + reg = < 0xf8f00600 0x20 >; + clocks = <&cpu_clk 1>; + } ; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index c772942a399a..86f44d5b0265 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -32,13 +32,3 @@ &ps_clk { clock-frequency = <33333330>; }; - -&ttc0_0 { - status = "ok"; - compatible = "xlnx,ttc-counter-clocksource"; -}; - -&ttc0_1 { - status = "ok"; - compatible = "xlnx,ttc-counter-clockevent"; -}; diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index fbbc5bb022d5..6a99e30f81d2 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -116,6 +116,7 @@ CONFIG_SND_SOC=y CONFIG_SND_MXS_SOC=y CONFIG_SND_SOC_MXS_SGTL5000=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b16bae2c9a60..bd07864f14a0 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -126,6 +126,8 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 35c21c375d81..53c15dec7af6 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -30,6 +30,11 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *); void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); +#ifdef CONFIG_MULTI_IRQ_HANDLER +extern void (*handle_arch_irq)(struct pt_regs *); +extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); +#endif + #endif #endif diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index 18c883023339..2092ee1e1300 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -20,11 +20,6 @@ struct seq_file; extern void init_FIQ(int); extern int show_fiq_list(struct seq_file *, int); -#ifdef CONFIG_MULTI_IRQ_HANDLER -extern void (*handle_arch_irq)(struct pt_regs *); -extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); -#endif - /* * This is for easy migration, but should be changed in the source */ @@ -35,35 +30,4 @@ do { \ raw_spin_unlock(&desc->lock); \ } while(0) -#ifndef __ASSEMBLY__ -/* - * Entry/exit functions for chained handlers where the primary IRQ chip - * may implement either fasteoi or level-trigger flow control. - */ -static inline void chained_irq_enter(struct irq_chip *chip, - struct irq_desc *desc) -{ - /* FastEOI controllers require no action on entry. */ - if (chip->irq_eoi) - return; - - if (chip->irq_mask_ack) { - chip->irq_mask_ack(&desc->irq_data); - } else { - chip->irq_mask(&desc->irq_data); - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - } -} - -static inline void chained_irq_exit(struct irq_chip *chip, - struct irq_desc *desc) -{ - if (chip->irq_eoi) - chip->irq_eoi(&desc->irq_data); - else - chip->irq_unmask(&desc->irq_data); -} -#endif - #endif diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h index 0f01f4677bd2..7b2899c2f7fc 100644 --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h @@ -34,12 +34,4 @@ struct twd_local_timer name __initdata = { \ int twd_local_timer_register(struct twd_local_timer *); -#ifdef CONFIG_HAVE_ARM_TWD -void twd_local_timer_of_register(void); -#else -static inline void twd_local_timer_of_register(void) -{ -} -#endif - #endif diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h index 5c27696de14f..8b1f37bfeeec 100644 --- a/arch/arm/include/asm/xen/events.h +++ b/arch/arm/include/asm/xen/events.h @@ -2,6 +2,7 @@ #define _ASM_ARM_XEN_EVENTS_H #include <asm/ptrace.h> +#include <asm/atomic.h> enum ipi_vector { XEN_PLACEHOLDER_VECTOR, @@ -15,26 +16,8 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return raw_irqs_disabled_flags(regs->ARM_cpsr); } -/* - * We cannot use xchg because it does not support 8-byte - * values. However it is safe to use {ldr,dtd}exd directly because all - * platforms which Xen can run on support those instructions. - */ -static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val) -{ - xen_ulong_t oldval; - unsigned int tmp; - - wmb(); - asm volatile("@ xchg_xen_ulong\n" - "1: ldrexd %0, %H0, [%3]\n" - " strexd %1, %2, %H2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (oldval), "=&r" (tmp) - : "r" (val), "r" (ptr) - : "memory", "cc"); - return oldval; -} +#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \ + atomic64_t, \ + counter), (val)) #endif /* _ASM_ARM_XEN_EVENTS_H */ diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 31644f1978d5..79078edbb9bc 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) evt->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_DUMMY; - evt->rating = 400; + evt->rating = 100; evt->mult = 1; evt->set_mode = broadcast_timer_set_mode; diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 3f2565037480..90525d9d290b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -362,25 +362,13 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt) } #ifdef CONFIG_OF -const static struct of_device_id twd_of_match[] __initconst = { - { .compatible = "arm,cortex-a9-twd-timer", }, - { .compatible = "arm,cortex-a5-twd-timer", }, - { .compatible = "arm,arm11mp-twd-timer", }, - { }, -}; - -void __init twd_local_timer_of_register(void) +static void __init twd_local_timer_of_register(struct device_node *np) { - struct device_node *np; int err; if (!is_smp() || !setup_max_cpus) return; - np = of_find_matching_node(NULL, twd_of_match); - if (!np) - return; - twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { err = -EINVAL; @@ -398,4 +386,7 @@ void __init twd_local_timer_of_register(void) out: WARN(err, "twd_local_timer_of_register failed (%d)\n", err); } +CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register); #endif diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index d912e7397ecc..94b0650ea98f 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -14,31 +14,15 @@ .text .align 5 - .word 0 - -1: subs r2, r2, #4 @ 1 do we have enough - blt 5f @ 1 bytes to align with? - cmp r3, #2 @ 1 - strltb r1, [ip], #1 @ 1 - strleb r1, [ip], #1 @ 1 - strb r1, [ip], #1 @ 1 - add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) -/* - * The pointer is now aligned and the length is adjusted. Try doing the - * memset again. - */ ENTRY(memset) -/* - * Preserve the contents of r0 for the return value. - */ - mov ip, r0 - ands r3, ip, #3 @ 1 unaligned? - bne 1b @ 1 + ands r3, r0, #3 @ 1 unaligned? + mov ip, r0 @ preserve r0 as return value + bne 6f @ 1 /* * we know that the pointer in ip is aligned to a word boundary. */ - orr r1, r1, r1, lsl #8 +1: orr r1, r1, r1, lsl #8 orr r1, r1, r1, lsl #16 mov r3, r1 cmp r2, #16 @@ -127,4 +111,13 @@ ENTRY(memset) tst r2, #1 strneb r1, [ip], #1 mov pc, lr + +6: subs r2, r2, #4 @ 1 do we have enough + blt 5b @ 1 bytes to align with? + cmp r3, #2 @ 1 + strltb r1, [ip], #1 @ 1 + strleb r1, [ip], #1 @ 1 + strb r1, [ip], #1 @ 1 + add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) + b 1b ENDPROC(memset) diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 2ea7059b840b..c20a870ea9c9 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = { /* If you choose to use a pin other than PB16 it needs to be 3.3V */ .pin = AT91_PIN_PB16, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index a033b8df9fb2..869cbecf00b7 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = { static struct w1_gpio_platform_data w1_gpio_pdata = { .pin = AT91_PIN_PA29, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index c5d7e1e9d757..a5afcf76550e 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -22,10 +22,9 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_address.h> -#include <asm/mach/irq.h> - #include <mach/hardware.h> #include <mach/at91_pio.h> diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index eed465ab0dd7..5fc23771c154 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 8e210262aeee..e0ca59171022 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -92,23 +92,21 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value) void at91_irq_suspend(void) { - int i = 0, bit; + int bit = -1; if (has_aic5()) { /* disable enabled irqs */ - while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IDCR, 1); - i = bit; } /* enable wakeup irqs */ - i = 0; - while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + bit = -1; + while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IECR, 1); - i = bit; } } else { at91_aic_write(AT91_AIC_IDCR, *backups); @@ -118,23 +116,21 @@ void at91_irq_suspend(void) void at91_irq_resume(void) { - int i = 0, bit; + int bit = -1; if (has_aic5()) { /* disable wakeup irqs */ - while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IDCR, 1); - i = bit; } /* enable irqs disabled for suspend */ - i = 0; - while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + bit = -1; + while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IECR, 1); - i = bit; } } else { at91_aic_write(AT91_AIC_IDCR, *wakeups); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index adb6db888a1f..73f1f250403a 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -201,7 +201,10 @@ extern u32 at91_slow_clock_sz; static int at91_pm_enter(suspend_state_t state) { - at91_gpio_suspend(); + if (of_have_populated_dt()) + at91_pinctrl_gpio_suspend(); + else + at91_gpio_suspend(); at91_irq_suspend(); pr_debug("AT91: PM - wake mask %08x, pm state %d\n", @@ -286,7 +289,10 @@ static int at91_pm_enter(suspend_state_t state) error: target_state = PM_SUSPEND_ON; at91_irq_resume(); - at91_gpio_resume(); + if (of_have_populated_dt()) + at91_pinctrl_gpio_resume(); + else + at91_gpio_resume(); return 0; } diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index a685e9706b7b..45b7c71d9cc1 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel); */ int edma_alloc_slot(unsigned ctlr, int slot) { + if (!edma_cc[ctlr]) + return -EINVAL; + if (slot >= 0) slot = EDMA_CHAN_SLOT(slot); diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d63d399c7bae..7bc0f9aa8b33 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -26,6 +26,7 @@ #include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/irqchip/arm-gic.h> +#include <linux/irqchip/chained_irq.h> #include <asm/proc-fns.h> #include <asm/exception.h> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 60f7c5be057d..95e04bd5813f 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,7 +20,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -76,13 +75,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit exynos_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index abda5a18a664..0f2111a11315 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -67,6 +67,7 @@ config ARCH_NETWINDER select ISA select ISA_DMA select PCI + select VIRT_TO_BUS help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index a4f9f50247d4..76c1170b3528 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -32,7 +32,6 @@ #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/smp_plat.h> -#include <asm/smp_twd.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> #include <asm/hardware/cache-l2x0.h> @@ -119,10 +118,10 @@ static void __init highbank_timer_init(void) sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); sp804_clockevents_init(timer_base, irq, "timer0"); - twd_local_timer_of_register(); - arch_timer_of_register(); arch_timer_sched_clock_init(); + + clocksource_of_init(); } static void highbank_power_off(void) diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index 8797a7001720..a984573e0d02 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/smp_scu.h> @@ -25,11 +24,6 @@ extern void secondary_startup(void); -static void __cpuinit highbank_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { highbank_set_cpu_jump(cpu, secondary_startup); @@ -67,7 +61,6 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations highbank_smp_ops __initdata = { .smp_init_cpus = highbank_smp_init_cpus, .smp_prepare_cpus = highbank_smp_prepare_cpus, - .smp_secondary_init = highbank_secondary_init, .smp_boot_secondary = highbank_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = highbank_cpu_die, diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 74e3a34d78b8..e13a8fa5e62c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -264,6 +264,7 @@ int __init mx35_clocks_init(void) clk_prepare_enable(clk[gpio3_gate]); clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + clk_prepare_enable(clk[max_gate]); /* * SCC is needed to boot via mmc after a watchdog reset. The clock code diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 7b025ee528a5..2f9ff93a4e61 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -172,7 +172,7 @@ static struct clk *clk[clk_max]; static struct clk_onecell_data clk_data; static enum mx6q_clks const clks_init_on[] __initconst = { - mmdc_ch0_axi, rom, + mmdc_ch0_axi, rom, pll1_sys, }; static struct clk_div_table clk_enet_ref_table[] = { diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 921fc1555854..a58c8b0527cc 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup) #ifdef CONFIG_PM /* - * The following code is located into the .data section. This is to - * allow phys_l2x0_saved_regs to be accessed with a relative load - * as we are running on physical address here. + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. */ - .data - .align #ifdef CONFIG_CACHE_L2X0 .macro pl310_resume - ldr r2, phys_l2x0_saved_regs + adr r0, l2x0_saved_regs_offset + ldr r2, [r0] + add r2, r2, r0 ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl @@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup) str r1, [r0, #L2X0_CTRL] @ re-enable L2 .endm - .globl phys_l2x0_saved_regs -phys_l2x0_saved_regs: - .long 0 +l2x0_saved_regs_offset: + .word l2x0_saved_regs - . + #else .macro pl310_resume .endm diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 03b65e5ea541..82348391582a 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = { NULL }; +static void __init imx25_timer_init(void) +{ + mx25_clocks_init_dt(); +} + DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .map_io = mx25_map_io, .init_early = imx25_init_early, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9ffd103b27e4..b59ddcb57c78 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/cpu.h> #include <linux/delay.h> #include <linux/export.h> @@ -28,11 +29,9 @@ #include <linux/regmap.h> #include <linux/micrel_phy.h> #include <linux/mfd/syscon.h> -#include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/system_misc.h> #include "common.h" @@ -292,7 +291,7 @@ static void __init imx6q_init_irq(void) static void __init imx6q_timer_init(void) { mx6q_clocks_init(); - twd_local_timer_of_register(); + clocksource_of_init(); imx_print_silicon_rev("i.MX6Q", imx6q_revision()); } diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 7c0b03f67b05..77e9a25ed0f6 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -52,16 +51,6 @@ void imx_scu_standby_enable(void) writel_relaxed(val, scu_base); } -static void __cpuinit imx_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); @@ -96,7 +85,6 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations imx_smp_ops __initdata = { .smp_init_cpus = imx_smp_init_cpus, .smp_prepare_cpus = imx_smp_prepare_cpus, - .smp_secondary_init = imx_secondary_init, .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index ee42d20cba19..5faba7a3c95f 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -22,8 +22,6 @@ #include "common.h" #include "hardware.h" -extern unsigned long phys_l2x0_saved_regs; - static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = { void __init imx6q_pm_init(void) { - /* - * The l2x0 core code provides an infrastucture to save and restore - * l2x0 registers across suspend/resume cycle. But because imx6q - * retains L2 content during suspend and needs to resume L2 before - * MMU is enabled, it can only utilize register saving support and - * have to take care of restoring on its own. So we save physical - * address of the data structure used by l2x0 core to save registers, - * and later restore the necessary ones in imx6q resume entry. - */ -#ifdef CONFIG_CACHE_L2X0 - phys_l2x0_saved_regs = __pa(&l2x0_saved_regs); -#endif - suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index d42730a1d4ab..d599e354ca57 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = { static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { .pin = 14, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device vulcan_w1_gpio = { diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 2e73e9d53f70..d367aa6b47bb 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void) struct device_node *np = of_find_compatible_node( NULL, NULL, "marvell,kirkwood-gating-clock"); - struct of_phandle_args clkspec; + struct clk *clk; clkspec.np = np; clkspec.args_count = 1; - clkspec.args[0] = CGC_BIT_GE0; - orion_clkdev_add(NULL, "mv643xx_eth_port.0", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_PEX0; orion_clkdev_add("0", "pcie", of_clk_get_from_provider(&clkspec)); @@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void) orion_clkdev_add("1", "pcie", of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_GE1; - orion_clkdev_add(NULL, "mv643xx_eth_port.1", + clkspec.args[0] = CGC_BIT_SDIO; + orion_clkdev_add(NULL, "mvsdio", of_clk_get_from_provider(&clkspec)); + + /* + * The ethernet interfaces forget the MAC address assigned by + * u-boot if the clocks are turned off. Until proper DT support + * is available we always enable them for now. + */ + clkspec.args[0] = CGC_BIT_GE0; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk); + clk_prepare_enable(clk); + + clkspec.args[0] = CGC_BIT_GE1; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk); + clk_prepare_enable(clk); } static void __init kirkwood_of_clk_init(void) diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index d1e2d595e79c..f62b68d926f4 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -9,6 +9,7 @@ */ #include <linux/init.h> +#include <linux/platform_device.h> #include <linux/gpio.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 42932865416a..00cdb0a5dac8 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/cputype.h> @@ -42,13 +41,6 @@ static inline int get_core_count(void) static void __cpuinit msm_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c index 8fb23af154b3..e26eeba46598 100644 --- a/arch/arm/mach-mxs/icoll.c +++ b/arch/arm/mach-mxs/icoll.c @@ -100,7 +100,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = { .xlate = irq_domain_xlate_onecell, }; -void __init icoll_of_init(struct device_node *np, +static void __init icoll_of_init(struct device_node *np, struct device_node *interrupt_parent) { /* diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 052186713347..e7b781d3788f 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -41,8 +41,6 @@ static struct fb_videomode mx23evk_video_modes[] = { .lower_margin = 4, .hsync_len = 1, .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, }, }; @@ -59,8 +57,6 @@ static struct fb_videomode mx28evk_video_modes[] = { .lower_margin = 10, .hsync_len = 10, .vsync_len = 10, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, }, }; @@ -77,7 +73,6 @@ static struct fb_videomode m28evk_video_modes[] = { .lower_margin = 45, .hsync_len = 1, .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT, }, }; @@ -94,9 +89,7 @@ static struct fb_videomode apx4devkit_video_modes[] = { .lower_margin = 13, .hsync_len = 48, .vsync_len = 3, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | - FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }, }; @@ -113,9 +106,7 @@ static struct fb_videomode apf28dev_video_modes[] = { .lower_margin = 0x15, .hsync_len = 64, .vsync_len = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | - FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }, }; @@ -132,7 +123,6 @@ static struct fb_videomode cfa10049_video_modes[] = { .lower_margin = 2, .hsync_len = 15, .vsync_len = 15, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT }, }; @@ -259,6 +249,8 @@ static void __init imx23_evk_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes); mxsfb_pdata.default_bpp = 32; mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | + MXSFB_SYNC_DOTCLK_FAILING_ACT; } static inline void enable_clk_enet_out(void) @@ -278,6 +270,8 @@ static void __init imx28_evk_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes); mxsfb_pdata.default_bpp = 32; mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | + MXSFB_SYNC_DOTCLK_FAILING_ACT; mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } @@ -297,6 +291,7 @@ static void __init m28evk_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes); mxsfb_pdata.default_bpp = 16; mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT; } static void __init sc_sps1_init(void) @@ -322,6 +317,8 @@ static void __init apx4devkit_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes); mxsfb_pdata.default_bpp = 32; mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | + MXSFB_SYNC_DOTCLK_FAILING_ACT; } #define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0) @@ -402,17 +399,18 @@ static void __init cfa10049_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); + + mxsfb_pdata.mode_list = cfa10049_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT; } static void __init cfa10037_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); - - mxsfb_pdata.mode_list = cfa10049_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init apf28_init(void) @@ -423,6 +421,8 @@ static void __init apf28_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes); mxsfb_pdata.default_bpp = 16; mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | + MXSFB_SYNC_DOTCLK_FAILING_ACT; } static void __init mxs_machine_init(void) diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index a4294aa9f301..e63b7d87acbd 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -18,6 +18,7 @@ #include <mach/mx23.h> #include <mach/mx28.h> +#include <mach/common.h> /* * Define the MX23 memory map. diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c index 54add60f94c9..1dff46703753 100644 --- a/arch/arm/mach-mxs/ocotp.c +++ b/arch/arm/mach-mxs/ocotp.c @@ -19,6 +19,7 @@ #include <asm/processor.h> /* for cpu_relax() */ #include <mach/mxs.h> +#include <mach/common.h> #define OCOTP_WORD_OFFSET 0x20 #define OCOTP_WORD_COUNT 0x20 diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index fb18831e88aa..14f7e9920479 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -31,6 +31,8 @@ #include <plat/i2c.h> +#include <mach/irqs.h> + #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); #else diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 49ac3dfebef9..8111cd9ff3e5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -311,9 +311,6 @@ config MACH_OMAP_ZOOM2 default y select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -321,9 +318,6 @@ config MACH_OMAP_ZOOM3 default y select OMAP_PACKAGE_CBP select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 0274ff7a2a2b..e54a48060198 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -102,6 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_sync32k_timer_init, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, @@ -119,6 +120,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_secure_sync32k_timer_init, .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f7c4616cbb60..d2ea68ea678a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/usb/phy.h> #include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -98,6 +99,7 @@ static void __init rx51_init(void) sdrc_params = nokia_get_sdram_timings(); omap_sdrc_init(sdrc_params, sdrc_params); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); rx51_peripherals_init(); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 0a6b9c7a63da..40f4a03d728f 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -108,7 +108,6 @@ void omap35xx_init_late(void); void omap3630_init_late(void); void am35xx_init_late(void); void ti81xx_init_late(void); -void omap4430_init_late(void); int omap2_common_pm_late_init(void); #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e4b16c8efe8b..410e1bac7815 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1122,9 +1122,6 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); - /* Now the GPMC is initialised, unreserve the chip-selects */ - gpmc_cs_map = 0; - return 0; } @@ -1383,6 +1380,9 @@ static int gpmc_probe(struct platform_device *pdev) if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); + /* Now the GPMC is initialised, unreserve the chip-selects */ + gpmc_cs_map = 0; + rc = gpmc_probe_dt(pdev); if (rc < 0) { clk_disable_unprepare(gpmc_l3_clk); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 6a217c98db54..f82cf878d6af 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -211,8 +211,6 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -EINVAL; } - pr_err("%s: Could not find signal %s\n", __func__, muxname); - return -ENODEV; } @@ -234,6 +232,8 @@ int __init omap_mux_get_by_name(const char *muxname, return mux_mode; } + pr_err("%s: Could not find signal %s\n", __func__, muxname); + return -ENODEV; } @@ -739,8 +739,9 @@ static void __init omap_mux_dbg_create_entry( list_for_each_entry(e, &partition->muxmodes, node) { struct omap_mux *m = &e->mux; - (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir, - m, &omap_mux_dbg_signal_fops); + (void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO, + mux_dbg_dir, m, + &omap_mux_dbg_signal_fops); } } diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index d9727218dd0a..e7a449758ab5 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -67,13 +67,6 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu) 4, 0, 0, 0, 0, 0); /* - * If any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2bdd4cf17a8f..4fd80257c73e 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -597,7 +597,7 @@ void __init omap4_local_timer_init(void) int err; if (of_have_populated_dt()) { - twd_local_timer_of_register(); + clocksource_of_init(); return; } diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 4b788310f6a6..c7c92e78f0cf 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -11,7 +11,6 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/mach/map.h> #include <asm/smp_plat.h> @@ -49,13 +48,6 @@ void __init sirfsoc_map_scu(void) static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index af41888acbd6..969b0ba7fa70 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = { .pin = GPIO_ONE_WIRE, .is_open_drain = 0, .enable_external_pullup = w1_enable_external_pullup, + .ext_pullup_enable_pin = -EINVAL, }; struct platform_device raumfeld_w1_gpio_device = { diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c index cb9f5e011e73..b6fac28a0034 100644 --- a/arch/arm/mach-s3c24xx/irq.c +++ b/arch/arm/mach-s3c24xx/irq.c @@ -25,6 +25,7 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index fcdf52dbcc49..f051f53e35b7 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", }; -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - static struct clk *clkset_vpllsrc_list[] = { [0] = &clk_fin_vpll, [1] = &clk_sclk_hdmi27m, @@ -305,18 +300,6 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { - .name = "dma", - .devname = "dma-pl330.0", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "dma", - .devname = "dma-pl330.1", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 4), - }, { .name = "rot", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, @@ -573,6 +556,20 @@ static struct clk clk_hsmmc3 = { .ctrlbit = (1<<19), }; +static struct clk clk_pdma0 = { + .name = "pdma0", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 3), +}; + +static struct clk clk_pdma1 = { + .name = "pdma1", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 4), +}; + static struct clk *clkset_uart_list[] = { [6] = &clk_mout_mpll.clk, [7] = &clk_mout_epll.clk, @@ -1075,6 +1072,8 @@ static struct clk *clk_cdev[] = { &clk_hsmmc1, &clk_hsmmc2, &clk_hsmmc3, + &clk_pdma0, + &clk_pdma1, }; /* Clock initialisation code */ @@ -1333,6 +1332,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = { CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), }; void __init s5pv210_register_clocks(void) @@ -1361,6 +1362,5 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) s3c_disable_clocks(clk_cdev[ptr], 1); - s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 3a38f7b34b94..e373de44a8b6 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -845,7 +845,7 @@ static struct fimc_source_info goni_camera_sensors[] = { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_BUS_TYPE_ITU_601, + .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &noon010pc30_board_info, .i2c_bus_num = 0, .clk_frequency = 16000000UL, diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index f1277f45381e..cd6855290b1f 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -58,11 +58,13 @@ static struct clk *main_clks[] = { }; enum { + MSTP114, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { + [MSTP114] = SH_CLK_MSTP32(&clkp, MSTPCR1, 14, 0), /* Ether */ [MSTP026] = SH_CLK_MSTP32(&clkp, MSTPCR0, 26, 0), /* SCIF0 */ [MSTP025] = SH_CLK_MSTP32(&clkp, MSTPCR0, 25, 0), /* SCIF1 */ [MSTP024] = SH_CLK_MSTP32(&clkp, MSTPCR0, 24, 0), /* SCIF2 */ @@ -75,6 +77,7 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* MSTP32 clocks */ + CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 7d86bfbb5b06..31d5cd4d9787 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -26,6 +26,25 @@ #include <mach/clock.h> #include <mach/common.h> +/* + * MD1 = 1 MD1 = 0 + * (PLLA = 1500) (PLLA = 1600) + * (MHz) (MHz) + *------------------------------------------------+-------------------- + * clkz 1000 (2/3) 800 (1/2) + * clkzs 250 (1/6) 200 (1/8) + * clki 750 (1/2) 800 (1/2) + * clks 250 (1/6) 200 (1/8) + * clks1 125 (1/12) 100 (1/16) + * clks3 187.5 (1/8) 200 (1/8) + * clks4 93.7 (1/16) 100 (1/16) + * clkp 62.5 (1/24) 50 (1/32) + * clkg 62.5 (1/24) 66.6 (1/24) + * clkb, CLKOUT + * (MD2 = 0) 62.5 (1/24) 66.6 (1/24) + * (MD2 = 1) 41.6 (1/36) 50 (1/32) +*/ + #define MD(nr) BIT(nr) #define FRQMR IOMEM(0xffc80014) @@ -93,7 +112,7 @@ static struct clk *main_clks[] = { }; enum { MSTP323, MSTP322, MSTP321, MSTP320, - MSTP115, + MSTP115, MSTP114, MSTP103, MSTP101, MSTP100, MSTP030, MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, @@ -107,6 +126,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */ [MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */ [MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */ + [MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */ [MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 3, 0), /* DU */ [MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 1, 0), /* USB2 */ [MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 0, 0), /* USB0/1 */ @@ -143,6 +163,7 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */ CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */ + CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */ CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */ CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */ CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index a755dcafef4d..951149e6bcca 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -18,11 +18,15 @@ #ifndef __ASM_R8A7778_H__ #define __ASM_R8A7778_H__ +#include <linux/sh_eth.h> + extern void r8a7778_add_standard_devices(void); extern void r8a7778_add_standard_devices_dt(void); +extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata); extern void r8a7778_init_delay(void); extern void r8a7778_init_irq(void); extern void r8a7778_init_irq_dt(void); extern void r8a7778_clock_init(void); +extern void r8a7778_init_irq_extpin(int irlm); #endif /* __ASM_R8A7778_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index 945299ed1638..188b295938a5 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -3,6 +3,7 @@ #include <linux/sh_clk.h> #include <linux/pm_domain.h> +#include <linux/sh_eth.h> struct platform_device; @@ -31,6 +32,7 @@ extern void r8a7779_earlytimer_init(void); extern void r8a7779_add_early_devices(void); extern void r8a7779_add_standard_devices(void); extern void r8a7779_add_standard_devices_dt(void); +extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata); extern void r8a7779_clock_init(void); extern void r8a7779_pinmux_init(void); extern void r8a7779_pm_init(void); diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 01c62bedf9cf..30b4a336308f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -3,6 +3,7 @@ * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * Copyright (C) 2013 Cogent Embedded, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,6 +24,7 @@ #include <linux/irqchip/arm-gic.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <linux/platform_device.h> #include <linux/irqchip.h> #include <linux/serial_sci.h> @@ -78,22 +80,20 @@ static struct sh_timer_config sh_tmu1_platform_data = { .clocksource_rating = 200, }; -#define PLATFORM_INFO(n, i) \ -{ \ - .parent = &platform_bus, \ - .name = #n, \ - .id = i, \ - .res = n ## i ## _resources, \ - .num_res = ARRAY_SIZE(n ## i ##_resources), \ - .data = &n ## i ##_platform_data, \ - .size_data = sizeof(n ## i ## _platform_data), \ -} - -struct platform_device_info platform_devinfo[] = { - PLATFORM_INFO(sh_tmu, 0), - PLATFORM_INFO(sh_tmu, 1), +/* Ether */ +static struct resource ether_resources[] = { + DEFINE_RES_MEM(0xfde00000, 0x400), + DEFINE_RES_IRQ(gic_iid(0x89)), }; +#define r8a7778_register_tmu(idx) \ + platform_device_register_resndata( \ + &platform_bus, "sh_tmu", idx, \ + sh_tmu##idx##_resources, \ + ARRAY_SIZE(sh_tmu##idx##_resources), \ + &sh_tmu##idx##_platform_data, \ + sizeof(sh_tmu##idx##_platform_data)) + void __init r8a7778_add_standard_devices(void) { int i; @@ -114,8 +114,59 @@ void __init r8a7778_add_standard_devices(void) &scif_platform_data[i], sizeof(struct plat_sci_port)); - for (i = 0; i < ARRAY_SIZE(platform_devinfo); i++) - platform_device_register_full(&platform_devinfo[i]); + r8a7778_register_tmu(0); + r8a7778_register_tmu(1); +} + +void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) +{ + platform_device_register_resndata(&platform_bus, "sh_eth", -1, + ether_resources, + ARRAY_SIZE(ether_resources), + pdata, sizeof(*pdata)); +} + +static struct renesas_intc_irqpin_config irqpin_platform_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ + .sense_bitfield_width = 2, +}; + +static struct resource irqpin_resources[] = { + DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ + DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ + DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ + DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */ + DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */ + DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */ +}; + +void __init r8a7778_init_irq_extpin(int irlm) +{ + void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); + unsigned long tmp; + + if (!icr0) { + pr_warn("r8a7778: unable to setup external irq pin mode\n"); + return; + } + + tmp = ioread32(icr0); + if (irlm) + tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */ + else + tmp &= ~(1 << 23); /* IRL mode - not supported */ + tmp |= (1 << 21); /* LVLMODE = 1 */ + iowrite32(tmp, icr0); + iounmap(icr0); + + if (irlm) + platform_device_register_resndata( + &platform_bus, "renesas_intc_irqpin", -1, + irqpin_resources, ARRAY_SIZE(irqpin_resources), + &irqpin_platform_data, sizeof(irqpin_platform_data)); } #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index a460ba3dedcb..b0b394842ea5 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -1,8 +1,9 @@ /* * r8a7779 processor support * - * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011, 2013 Renesas Solutions Corp. * Copyright (C) 2011 Magnus Damm + * Copyright (C) 2013 Cogent Embedded, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -393,6 +394,18 @@ static struct platform_device sata_device = { }, }; +/* Ether */ +static struct resource ether_resources[] = { + { + .start = 0xfde00000, + .end = 0xfde003ff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_iid(0xb4), + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device *r8a7779_devices_dt[] __initdata = { &scif0_device, &scif1_device, @@ -428,6 +441,14 @@ void __init r8a7779_add_standard_devices(void) ARRAY_SIZE(r8a7779_late_devices)); } +void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata) +{ + platform_device_register_resndata(&platform_bus, "sh_eth", -1, + ether_resources, + ARRAY_SIZE(ether_resources), + pdata, sizeof(*pdata)); +} + /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ void __init __weak r8a7779_register_twd(void) { } diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 8225c16b371b..e38691b4d0dd 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/emev2.h> #include <asm/smp_plat.h> @@ -31,11 +30,6 @@ #define EMEV2_SCU_BASE 0x1e000000 -static void __cpuinit emev2_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu))); @@ -69,6 +63,5 @@ static void __init emev2_smp_init_cpus(void) struct smp_operations emev2_smp_ops __initdata = { .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, - .smp_secondary_init = emev2_secondary_init, .smp_boot_secondary = emev2_boot_secondary, }; diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index ea4535a5c4e2..a853bf182ed5 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/r8a7779.h> #include <asm/cacheflush.h> @@ -82,11 +81,6 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) return ret ? ret : 1; } -static void __cpuinit r8a7779_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { struct r8a7779_pm_ch *ch = NULL; @@ -181,7 +175,6 @@ static int r8a7779_cpu_disable(unsigned int cpu) struct smp_operations r8a7779_smp_ops __initdata = { .smp_init_cpus = r8a7779_smp_init_cpus, .smp_prepare_cpus = r8a7779_smp_prepare_cpus, - .smp_secondary_init = r8a7779_secondary_init, .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = r8a7779_cpu_kill, diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 5ae502b16437..bf79626ee5a4 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -49,11 +48,6 @@ void __init sh73a0_register_twd(void) } #endif -static void __cpuinit sh73a0_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); @@ -134,7 +128,6 @@ static int sh73a0_cpu_disable(unsigned int cpu) struct smp_operations sh73a0_smp_ops __initdata = { .smp_init_cpus = sh73a0_smp_init_cpus, .smp_prepare_cpus = sh73a0_smp_prepare_cpus, - .smp_secondary_init = sh73a0_secondary_init, .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = sh73a0_cpu_kill, diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 84c60fa8daa0..ca14d1d5ac7f 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> @@ -33,16 +32,6 @@ extern void __iomem *sys_manager_base_addr; extern void __iomem *rst_manager_base_addr; -static void __cpuinit socfpga_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; @@ -109,7 +98,6 @@ static void socfpga_cpu_die(unsigned int cpu) struct smp_operations socfpga_smp_ops __initdata = { .smp_init_cpus = socfpga_smp_init_cpus, .smp_prepare_cpus = socfpga_smp_prepare_cpus, - .smp_secondary_init = socfpga_secondary_init, .smp_boot_secondary = socfpga_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = socfpga_cpu_die, diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c index af4ade61cd95..551c69c9a228 100644 --- a/arch/arm/mach-spear13xx/platsmp.c +++ b/arch/arm/mach-spear13xx/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/io.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> #include <mach/spear.h> @@ -28,13 +27,6 @@ static void __iomem *scu_base = IOMEM(VA_SCU_BASE); static void __cpuinit spear13xx_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index c7d2b4a8d8cc..25a10191b021 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -15,12 +15,12 @@ #include <linux/amba/pl022.h> #include <linux/clk.h> +#include <linux/clocksource.h> #include <linux/dw_dmac.h> #include <linux/err.h> #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include <asm/smp_twd.h> #include <mach/dma.h> #include <mach/generic.h> #include <mach/spear.h> @@ -179,5 +179,5 @@ void __init spear13xx_timer_init(void) clk_put(pclk); spear_setup_of_timer(); - twd_local_timer_of_register(); + clocksource_of_init(); } diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f9d754f90c59..d2b3937c4014 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -14,7 +14,7 @@ #define pr_fmt(fmt) "SPEAr3xx: " fmt #include <linux/amba/pl022.h> -#include <linux/amba/pl08x.h> +#include <linux/amba/pl080.h> #include <linux/io.h> #include <plat/pl080.h> #include <mach/generic.h> diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 2c6b3d55213b..9348d3c496a9 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -18,7 +18,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <linux/clk/tegra.h> #include <asm/cacheflush.h> @@ -44,13 +43,6 @@ static cpumask_t tegra_cpu_init_mask; static void __cpuinit tegra_secondary_init(unsigned int cpu) { - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 18f7af339dc9..152b1309b9af 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -16,7 +16,6 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -58,13 +57,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit ux500_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index a6af0b8732ba..d07bbe7f04a6 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -7,6 +7,7 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/clocksource.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/platform_data/clocksource-nomadik-mtu.h> @@ -32,7 +33,7 @@ static void __init ux500_twd_init(void) twd_local_timer = &u8500_twd_local_timer; if (of_have_populated_dt()) - twd_local_timer_of_register(); + clocksource_of_init(); else { err = twd_local_timer_register(twd_local_timer); if (err) diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 915683cb67d6..d0ad78998cb6 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -5,6 +5,7 @@ #include <linux/amba/bus.h> #include <linux/amba/mmci.h> #include <linux/io.h> +#include <linux/clocksource.h> #include <linux/smp.h> #include <linux/init.h> #include <linux/irqchip.h> @@ -25,7 +26,6 @@ #include <asm/arch_timer.h> #include <asm/mach-types.h> #include <asm/sizes.h> -#include <asm/smp_twd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -435,6 +435,7 @@ static void __init v2m_dt_timer_init(void) vexpress_clk_of_init(); + clocksource_of_init(); do { node = of_find_compatible_node(node, NULL, "arm,sp804"); } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB); @@ -445,8 +446,7 @@ static void __init v2m_dt_timer_init(void) irq_of_parse_and_map(node, 0)); } - if (arch_timer_of_register() != 0) - twd_local_timer_of_register(); + arch_timer_of_register(); if (arch_timer_sched_clock_init() != 0) versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c index 8badaabe70a1..f4143f5bfa5b 100644 --- a/arch/arm/mach-virt/platsmp.c +++ b/arch/arm/mach-virt/platsmp.c @@ -21,8 +21,6 @@ #include <linux/smp.h> #include <linux/of.h> -#include <linux/irqchip/arm-gic.h> - #include <asm/psci.h> #include <asm/smp_plat.h> @@ -45,14 +43,8 @@ static int __cpuinit virt_boot_secondary(unsigned int cpu, return -ENODEV; } -static void __cpuinit virt_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - struct smp_operations __initdata virt_smp_ops = { .smp_init_cpus = virt_smp_init_cpus, .smp_prepare_cpus = virt_smp_prepare_cpus, - .smp_secondary_init = virt_secondary_init, .smp_boot_secondary = virt_boot_secondary, }; diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index adb6c0ea0e53..f4a7e630bde0 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -8,6 +8,8 @@ config ARCH_ZYNQ select ICST select MIGHT_HAVE_CACHE_L2X0 select USE_OF + select HAVE_SMP select SPARSE_IRQ + select CADENCE_TTC_TIMER help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index 397268c1b250..1b25d92ebf22 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -3,4 +3,8 @@ # # Common support -obj-y := common.o timer.o +obj-y := common.o slcr.o +CFLAGS_REMOVE_hotplug.o =-march=armv6k +CFLAGS_hotplug.o =-Wa,-march=armv7-a -mcpu=cortex-a9 +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 5c8983218183..5bfe7035b73d 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/clk/zynq.h> +#include <linux/clocksource.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> @@ -32,20 +33,23 @@ #include <asm/mach-types.h> #include <asm/page.h> #include <asm/pgtable.h> +#include <asm/smp_scu.h> #include <asm/hardware/cache-l2x0.h> #include "common.h" +void __iomem *zynq_scu_base; + static struct of_device_id zynq_of_bus_ids[] __initdata = { { .compatible = "simple-bus", }, {} }; /** - * xilinx_init_machine() - System specific initialization, intended to be - * called from board specific initialization. + * zynq_init_machine - System specific initialization, intended to be + * called from board specific initialization. */ -static void __init xilinx_init_machine(void) +static void __init zynq_init_machine(void) { /* * 64KB way size, 8-way associativity, parity disabled @@ -55,50 +59,56 @@ static void __init xilinx_init_machine(void) of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL); } -#define SCU_PERIPH_PHYS 0xF8F00000 -#define SCU_PERIPH_SIZE SZ_8K -#define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE) +static void __init zynq_timer_init(void) +{ + zynq_slcr_init(); + clocksource_of_init(); +} -static struct map_desc scu_desc __initdata = { - .virtual = SCU_PERIPH_VIRT, - .pfn = __phys_to_pfn(SCU_PERIPH_PHYS), - .length = SCU_PERIPH_SIZE, - .type = MT_DEVICE, +static struct map_desc zynq_cortex_a9_scu_map __initdata = { + .length = SZ_256, + .type = MT_DEVICE, }; -static void __init xilinx_zynq_timer_init(void) +static void __init zynq_scu_map_io(void) { - struct device_node *np; - void __iomem *slcr; - - np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr"); - slcr = of_iomap(np, 0); - WARN_ON(!slcr); + unsigned long base; - xilinx_zynq_clocks_init(slcr); - - xttcps_timer_init(); + base = scu_a9_get_base(); + zynq_cortex_a9_scu_map.pfn = __phys_to_pfn(base); + /* Expected address is in vmalloc area that's why simple assign here */ + zynq_cortex_a9_scu_map.virtual = base; + iotable_init(&zynq_cortex_a9_scu_map, 1); + zynq_scu_base = (void __iomem *)base; + BUG_ON(!zynq_scu_base); } /** - * xilinx_map_io() - Create memory mappings needed for early I/O. + * zynq_map_io - Create memory mappings needed for early I/O. */ -static void __init xilinx_map_io(void) +static void __init zynq_map_io(void) { debug_ll_io_init(); - iotable_init(&scu_desc, 1); + zynq_scu_map_io(); +} + +static void zynq_system_reset(char mode, const char *cmd) +{ + zynq_slcr_system_reset(); } -static const char *xilinx_dt_match[] = { +static const char * const zynq_dt_match[] = { "xlnx,zynq-zc702", "xlnx,zynq-7000", NULL }; MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") - .map_io = xilinx_map_io, + .smp = smp_ops(zynq_smp_ops), + .map_io = zynq_map_io, .init_irq = irqchip_init, - .init_machine = xilinx_init_machine, - .init_time = xilinx_zynq_timer_init, - .dt_compat = xilinx_dt_match, + .init_machine = zynq_init_machine, + .init_time = zynq_timer_init, + .dt_compat = zynq_dt_match, + .restart = zynq_system_reset, MACHINE_END diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index 8b4dbbaa01cf..fbbd0e21c404 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -17,6 +17,24 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -void __init xttcps_timer_init(void); +extern int zynq_slcr_init(void); +extern void zynq_slcr_system_reset(void); +extern void zynq_slcr_cpu_stop(int cpu); +extern void zynq_slcr_cpu_start(int cpu); + +#ifdef CONFIG_SMP +extern void secondary_startup(void); +extern char zynq_secondary_trampoline; +extern char zynq_secondary_trampoline_jump; +extern char zynq_secondary_trampoline_end; +extern int __cpuinit zynq_cpun_start(u32 address, int cpu); +extern struct smp_operations zynq_smp_ops __initdata; +#endif + +extern void __iomem *zynq_slcr_base; +extern void __iomem *zynq_scu_base; + +/* Hotplug */ +extern void zynq_platform_cpu_die(unsigned int cpu); #endif diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S new file mode 100644 index 000000000000..d183cd234a9b --- /dev/null +++ b/arch/arm/mach-zynq/headsmp.S @@ -0,0 +1,24 @@ +/* + * Copyright (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * Copyright (c) 2012-2013 Xilinx + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __CPUINIT + +ENTRY(zynq_secondary_trampoline) + ldr r0, [pc] + bx r0 +.globl zynq_secondary_trampoline_jump +zynq_secondary_trampoline_jump: + /* Space for jumping address */ + .word /* cpu 1 */ +.globl zynq_secondary_trampoline_end +zynq_secondary_trampoline_end: + +ENDPROC(zynq_secondary_trampoline) diff --git a/arch/arm/mach-zynq/hotplug.c b/arch/arm/mach-zynq/hotplug.c new file mode 100644 index 000000000000..c89672bd1de2 --- /dev/null +++ b/arch/arm/mach-zynq/hotplug.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2012-2013 Xilinx + * + * based on linux/arch/arm/mach-realview/hotplug.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/cp15.h> +#include "common.h" + +static inline void zynq_cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + " mcr p15, 0, %1, c7, c5, 0\n" + " dsb\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x40\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C) + : "cc"); +} + +static inline void zynq_cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + " mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x40\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C) + : "cc"); +} + +static inline void zynq_platform_do_lowpower(unsigned int cpu, int *spurious) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + dsb(); + wfi(); + + /* + * Getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * Just note it happening - when we're woken, we can report + * its occurrence. + */ + (*spurious)++; + } +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void zynq_platform_cpu_die(unsigned int cpu) +{ + int spurious = 0; + + /* + * we're ready for shutdown now, so do it + */ + zynq_cpu_enter_lowpower(); + zynq_platform_do_lowpower(cpu, &spurious); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + zynq_cpu_leave_lowpower(); + + if (spurious) + pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); +} diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c new file mode 100644 index 000000000000..5fc167e07619 --- /dev/null +++ b/arch/arm/mach-zynq/platsmp.c @@ -0,0 +1,136 @@ +/* + * This file contains Xilinx specific SMP code, used to start up + * the second processor. + * + * Copyright (C) 2011-2013 Xilinx + * + * based on linux/arch/arm/mach-realview/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/export.h> +#include <linux/jiffies.h> +#include <linux/init.h> +#include <linux/io.h> +#include <asm/cacheflush.h> +#include <asm/smp_scu.h> +#include <linux/irqchip/arm-gic.h> +#include "common.h" + +/* + * Store number of cores in the system + * Because of scu_get_core_count() must be in __init section and can't + * be called from zynq_cpun_start() because it is in __cpuinit section. + */ +static int ncores; + +int __cpuinit zynq_cpun_start(u32 address, int cpu) +{ + u32 trampoline_code_size = &zynq_secondary_trampoline_end - + &zynq_secondary_trampoline; + + if (cpu > ncores) { + pr_warn("CPU No. is not available in the system\n"); + return -1; + } + + /* MS: Expectation that SLCR are directly map and accessible */ + /* Not possible to jump to non aligned address */ + if (!(address & 3) && (!address || (address >= trampoline_code_size))) { + /* Store pointer to ioremap area which points to address 0x0 */ + static u8 __iomem *zero; + u32 trampoline_size = &zynq_secondary_trampoline_jump - + &zynq_secondary_trampoline; + + zynq_slcr_cpu_stop(cpu); + + if (__pa(PAGE_OFFSET)) { + zero = ioremap(0, trampoline_code_size); + if (!zero) { + pr_warn("BOOTUP jump vectors not accessible\n"); + return -1; + } + } else { + zero = (__force u8 __iomem *)PAGE_OFFSET; + } + + /* + * This is elegant way how to jump to any address + * 0x0: Load address at 0x8 to r0 + * 0x4: Jump by mov instruction + * 0x8: Jumping address + */ + memcpy((__force void *)zero, &zynq_secondary_trampoline, + trampoline_size); + writel(address, zero + trampoline_size); + + flush_cache_all(); + outer_flush_range(0, trampoline_code_size); + smp_wmb(); + + if (__pa(PAGE_OFFSET)) + iounmap(zero); + + zynq_slcr_cpu_start(cpu); + + return 0; + } + + pr_warn("Can't start CPU%d: Wrong starting address %x\n", cpu, address); + + return -1; +} +EXPORT_SYMBOL(zynq_cpun_start); + +static int __cpuinit zynq_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + return zynq_cpun_start(virt_to_phys(secondary_startup), cpu); +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +static void __init zynq_smp_init_cpus(void) +{ + int i; + + ncores = scu_get_core_count(zynq_scu_base); + + for (i = 0; i < ncores && i < CONFIG_NR_CPUS; i++) + set_cpu_possible(i, true); +} + +static void __init zynq_smp_prepare_cpus(unsigned int max_cpus) +{ + int i; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + scu_enable(zynq_scu_base); +} + +struct smp_operations zynq_smp_ops __initdata = { + .smp_init_cpus = zynq_smp_init_cpus, + .smp_prepare_cpus = zynq_smp_prepare_cpus, + .smp_boot_secondary = zynq_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = zynq_platform_cpu_die, +#endif +}; diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c new file mode 100644 index 000000000000..c70969b9c258 --- /dev/null +++ b/arch/arm/mach-zynq/slcr.c @@ -0,0 +1,125 @@ +/* + * Xilinx SLCR driver + * + * Copyright (c) 2011-2013 Xilinx Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. + */ + +#include <linux/export.h> +#include <linux/io.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/uaccess.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/clk/zynq.h> +#include "common.h" + +#define SLCR_UNLOCK_MAGIC 0xDF0D +#define SLCR_UNLOCK 0x8 /* SCLR unlock register */ + +#define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset Control */ + +#define SLCR_A9_CPU_CLKSTOP 0x10 +#define SLCR_A9_CPU_RST 0x1 + +#define SLCR_A9_CPU_RST_CTRL 0x244 /* CPU Software Reset Control */ +#define SLCR_REBOOT_STATUS 0x258 /* PS Reboot Status */ + +void __iomem *zynq_slcr_base; + +/** + * zynq_slcr_system_reset - Reset the entire system. + */ +void zynq_slcr_system_reset(void) +{ + u32 reboot; + + /* + * Unlock the SLCR then reset the system. + * Note that this seems to require raw i/o + * functions or there's a lockup? + */ + writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK); + + /* + * Clear 0x0F000000 bits of reboot status register to workaround + * the FSBL not loading the bitstream after soft-reboot + * This is a temporary solution until we know more. + */ + reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS); + writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS); + writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET); +} + +/** + * zynq_slcr_cpu_start - Start cpu + * @cpu: cpu number + */ +void zynq_slcr_cpu_start(int cpu) +{ + /* enable CPUn */ + writel(SLCR_A9_CPU_CLKSTOP << cpu, + zynq_slcr_base + SLCR_A9_CPU_RST_CTRL); + /* enable CLK for CPUn */ + writel(0x0 << cpu, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL); +} + +/** + * zynq_slcr_cpu_stop - Stop cpu + * @cpu: cpu number + */ +void zynq_slcr_cpu_stop(int cpu) +{ + /* stop CLK and reset CPUn */ + writel((SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu, + zynq_slcr_base + SLCR_A9_CPU_RST_CTRL); +} + +/** + * zynq_slcr_init + * Returns 0 on success, negative errno otherwise. + * + * Called early during boot from platform code to remap SLCR area. + */ +int __init zynq_slcr_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr"); + if (!np) { + pr_err("%s: no slcr node found\n", __func__); + BUG(); + } + + zynq_slcr_base = of_iomap(np, 0); + if (!zynq_slcr_base) { + pr_err("%s: Unable to map I/O memory\n", __func__); + BUG(); + } + + /* unlock the SLCR so that registers can be changed */ + writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK); + + pr_info("%s mapped to %p\n", np->name, zynq_slcr_base); + + xilinx_zynq_clocks_init(zynq_slcr_base); + + of_node_put(np); + + return 0; +} diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c deleted file mode 100644 index f9fbc9c1e7a6..000000000000 --- a/arch/arm/mach-zynq/timer.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * This file contains driver for the Xilinx PS Timer Counter IP. - * - * Copyright (C) 2011 Xilinx - * - * based on arch/mips/kernel/time.c timer driver - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/slab.h> -#include <linux/clk-provider.h> -#include "common.h" - -/* - * Timer Register Offset Definitions of Timer 1, Increment base address by 4 - * and use same offsets for Timer 2 - */ -#define XTTCPS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ -#define XTTCPS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ -#define XTTCPS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ -#define XTTCPS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ -#define XTTCPS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ -#define XTTCPS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ - -#define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1 - -/* - * Setup the timers to use pre-scaling, using a fixed value for now that will - * work across most input frequency, but it may need to be more dynamic - */ -#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ -#define PRESCALE 2048 /* The exponent must match this */ -#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1) -#define CLK_CNTRL_PRESCALE_EN 1 -#define CNT_CNTRL_RESET (1<<4) - -/** - * struct xttcps_timer - This definition defines local timer structure - * - * @base_addr: Base address of timer - **/ -struct xttcps_timer { - void __iomem *base_addr; -}; - -struct xttcps_timer_clocksource { - struct xttcps_timer xttc; - struct clocksource cs; -}; - -#define to_xttcps_timer_clksrc(x) \ - container_of(x, struct xttcps_timer_clocksource, cs) - -struct xttcps_timer_clockevent { - struct xttcps_timer xttc; - struct clock_event_device ce; - struct clk *clk; -}; - -#define to_xttcps_timer_clkevent(x) \ - container_of(x, struct xttcps_timer_clockevent, ce) - -/** - * xttcps_set_interval - Set the timer interval value - * - * @timer: Pointer to the timer instance - * @cycles: Timer interval ticks - **/ -static void xttcps_set_interval(struct xttcps_timer *timer, - unsigned long cycles) -{ - u32 ctrl_reg; - - /* Disable the counter, set the counter value and re-enable counter */ - ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - - __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET); - - /* - * Reset the counter (0x10) so that it starts from 0, one-shot - * mode makes this needed for timing to be right. - */ - ctrl_reg |= CNT_CNTRL_RESET; - ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); -} - -/** - * xttcps_clock_event_interrupt - Clock event timer interrupt handler - * - * @irq: IRQ number of the Timer - * @dev_id: void pointer to the xttcps_timer instance - * - * returns: Always IRQ_HANDLED - success - **/ -static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id) -{ - struct xttcps_timer_clockevent *xttce = dev_id; - struct xttcps_timer *timer = &xttce->xttc; - - /* Acknowledge the interrupt and call event handler */ - __raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET); - - xttce->ce.event_handler(&xttce->ce); - - return IRQ_HANDLED; -} - -/** - * __xttc_clocksource_read - Reads the timer counter register - * - * returns: Current timer counter register value - **/ -static cycle_t __xttc_clocksource_read(struct clocksource *cs) -{ - struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc; - - return (cycle_t)__raw_readl(timer->base_addr + - XTTCPS_COUNT_VAL_OFFSET); -} - -/** - * xttcps_set_next_event - Sets the time interval for next event - * - * @cycles: Timer interval ticks - * @evt: Address of clock event instance - * - * returns: Always 0 - success - **/ -static int xttcps_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); - struct xttcps_timer *timer = &xttce->xttc; - - xttcps_set_interval(timer, cycles); - return 0; -} - -/** - * xttcps_set_mode - Sets the mode of timer - * - * @mode: Mode to be set - * @evt: Address of clock event instance - **/ -static void xttcps_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); - struct xttcps_timer *timer = &xttce->xttc; - u32 ctrl_reg; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - xttcps_set_interval(timer, - DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk), - PRESCALE * HZ)); - break; - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - break; - case CLOCK_EVT_MODE_RESUME: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - break; - } -} - -static void __init zynq_ttc_setup_clocksource(struct device_node *np, - void __iomem *base) -{ - struct xttcps_timer_clocksource *ttccs; - struct clk *clk; - int err; - u32 reg; - - ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL); - if (WARN_ON(!ttccs)) - return; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - clk = of_clk_get_by_name(np, "cpu_1x"); - if (WARN_ON(IS_ERR(clk))) - return; - - err = clk_prepare_enable(clk); - if (WARN_ON(err)) - return; - - ttccs->xttc.base_addr = base + reg * 4; - - ttccs->cs.name = np->name; - ttccs->cs.rating = 200; - ttccs->cs.read = __xttc_clocksource_read; - ttccs->cs.mask = CLOCKSOURCE_MASK(16); - ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; - - __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPS_IER_OFFSET); - __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); - __raw_writel(CNT_CNTRL_RESET, - ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); - - err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE); - if (WARN_ON(err)) - return; -} - -static void __init zynq_ttc_setup_clockevent(struct device_node *np, - void __iomem *base) -{ - struct xttcps_timer_clockevent *ttcce; - int err, irq; - u32 reg; - - ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL); - if (WARN_ON(!ttcce)) - return; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - ttcce->xttc.base_addr = base + reg * 4; - - ttcce->clk = of_clk_get_by_name(np, "cpu_1x"); - if (WARN_ON(IS_ERR(ttcce->clk))) - return; - - err = clk_prepare_enable(ttcce->clk); - if (WARN_ON(err)) - return; - - irq = irq_of_parse_and_map(np, 0); - if (WARN_ON(!irq)) - return; - - ttcce->ce.name = np->name; - ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - ttcce->ce.set_next_event = xttcps_set_next_event; - ttcce->ce.set_mode = xttcps_set_mode; - ttcce->ce.rating = 200; - ttcce->ce.irq = irq; - ttcce->ce.cpumask = cpu_possible_mask; - - __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); - __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); - __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPS_IER_OFFSET); - - err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER, - np->name, ttcce); - if (WARN_ON(err)) - return; - - clockevents_config_and_register(&ttcce->ce, - clk_get_rate(ttcce->clk) / PRESCALE, - 1, 0xfffe); -} - -static const __initconst struct of_device_id zynq_ttc_match[] = { - { .compatible = "xlnx,ttc-counter-clocksource", - .data = zynq_ttc_setup_clocksource, }, - { .compatible = "xlnx,ttc-counter-clockevent", - .data = zynq_ttc_setup_clockevent, }, - {} -}; - -/** - * xttcps_timer_init - Initialize the timer - * - * Initializes the timer hardware and register the clock source and clock event - * timers with Linux kernal timer framework - **/ -void __init xttcps_timer_init(void) -{ - struct device_node *np; - - for_each_compatible_node(np, NULL, "xlnx,ttc") { - struct device_node *np_chld; - void __iomem *base; - - base = of_iomap(np, 0); - if (WARN_ON(!base)) - return; - - for_each_available_child_of_node(np, np_chld) { - int (*cb)(struct device_node *np, void __iomem *base); - const struct of_device_id *match; - - match = of_match_node(zynq_ttc_match, np_chld); - if (match) { - cb = match->data; - cb(np_chld, base); - } - } - } -} diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c7e3759f16d3..e9db6b4bf65a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -342,6 +342,7 @@ static int __init atomic_pool_init(void) { struct dma_pool *pool = &atomic_pool; pgprot_t prot = pgprot_dmacoherent(pgprot_kernel); + gfp_t gfp = GFP_KERNEL | GFP_DMA; unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; @@ -361,8 +362,8 @@ static int __init atomic_pool_init(void) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, atomic_pool_init); else - ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, - &page, atomic_pool_init); + ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page, + atomic_pool_init); if (ptr) { int i; diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 6828ef6ce80e..a0bd8a755bdf 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -576,7 +576,7 @@ load_ind: /* x = ((*(frame + k)) & 0xf) << 2; */ ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL; /* the interpreter should deal with the negative K */ - if (k < 0) + if ((int)k < 0) return -1; /* offset in r1: we might have to take the slow path */ emit_mov_i(r_off, k, ctx); diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c index febe3862873c..807ac8e5cbc0 100644 --- a/arch/arm/plat-orion/addr-map.c +++ b/arch/arm/plat-orion/addr-map.c @@ -157,9 +157,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i)); /* - * Chip select enabled? + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). */ - if (size & 1) { + if ((size & 1) && !(base & 0xF)) { struct mbus_dram_window *w; w = &orion_mbus_dram_info.cs[cs++]; diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f980cf3d2baa..5d205e74e495 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <mach/map.h> @@ -23,8 +24,6 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> -#include <asm/mach/irq.h> - static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c index bae56131a50a..fafdb059043a 100644 --- a/arch/arm/plat-samsung/s5p-irq-gpioint.c +++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -22,8 +23,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> -#include <asm/mach/irq.h> - #define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u)) #define CON_OFFSET 0x700 diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 739d016eb273..8a08c31b5e20 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -10,7 +10,7 @@ choice config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" - select ARCH_HAVE_CPUFREQ + select ARCH_HAS_CPUFREQ select ARM_GIC select CPU_V7 select GPIO_SPEAR_SPICS diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index f2ac15561778..1e1b2d769748 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -14,7 +14,6 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -37,13 +36,6 @@ static DEFINE_SPINLOCK(boot_lock); void __cpuinit versatile_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ |
