diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/mach-orion5x/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/ls-chl-setup.c | 327 |
3 files changed, 335 insertions, 0 deletions
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index c897e03e413d..6604fc6ca58a 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -51,6 +51,13 @@ config MACH_LINKSTATION_PRO Buffalo Linkstation Pro/Live platform. Both v1 and v2 devices are supported. +config MACH_LINKSTATION_LSCHL + bool "Buffalo Linkstation Live v3 (LS-CHL)" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation Live v3 (LS-CHL) platform. + config MACH_LINKSTATION_MINI bool "Buffalo Linkstation Mini" select I2C_BOARDINFO diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index eb6eabcb41e4..7f18cdacd487 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o +obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c new file mode 100644 index 000000000000..20a9b66cbafa --- /dev/null +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -0,0 +1,327 @@ +/* + * arch/arm/mach-orion5x/ls-chl-setup.c + * + * Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx_eth.h> +#include <linux/leds.h> +#include <linux/gpio_keys.h> +#include <linux/gpio-fan.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/ata_platform.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/system.h> +#include <mach/orion5x.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * Linkstation LS-CHL Info + ****************************************************************************/ + +/* + * 256K NOR flash Device bus boot chip select + */ + +#define LSCHL_NOR_BOOT_BASE 0xf4000000 +#define LSCHL_NOR_BOOT_SIZE SZ_256K + +/***************************************************************************** + * 256KB NOR Flash on BOOT Device + ****************************************************************************/ + +static struct physmap_flash_data lschl_nor_flash_data = { + .width = 1, +}; + +static struct resource lschl_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = LSCHL_NOR_BOOT_BASE, + .end = LSCHL_NOR_BOOT_BASE + LSCHL_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device lschl_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &lschl_nor_flash_data, + }, + .num_resources = 1, + .resource = &lschl_nor_flash_resource, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data lschl_eth_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * RTC 5C372a on I2C bus + ****************************************************************************/ + +static struct i2c_board_info __initdata lschl_i2c_rtc = { + I2C_BOARD_INFO("rs5c372a", 0x32), +}; + +/***************************************************************************** + * LEDs attached to GPIO + ****************************************************************************/ + +#define LSCHL_GPIO_LED_ALARM 2 +#define LSCHL_GPIO_LED_INFO 3 +#define LSCHL_GPIO_LED_FUNC 17 +#define LSCHL_GPIO_LED_PWR 0 + +static struct gpio_led lschl_led_pins[] = { + { + .name = "alarm:red", + .gpio = LSCHL_GPIO_LED_ALARM, + .active_low = 1, + }, { + .name = "info:amber", + .gpio = LSCHL_GPIO_LED_INFO, + .active_low = 1, + }, { + .name = "func:blue:top", + .gpio = LSCHL_GPIO_LED_FUNC, + .active_low = 1, + }, { + .name = "power:blue:bottom", + .gpio = LSCHL_GPIO_LED_PWR, + }, +}; + +static struct gpio_led_platform_data lschl_led_data = { + .leds = lschl_led_pins, + .num_leds = ARRAY_SIZE(lschl_led_pins), +}; + +static struct platform_device lschl_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &lschl_led_data, + }, +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data lschl_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * LS-CHL specific power off method: reboot + ****************************************************************************/ +/* + * On the LS-CHL, the shutdown process is following: + * - Userland monitors key events until the power switch goes to off position + * - The board reboots + * - U-boot starts and goes into an idle mode waiting for the user + * to move the switch to ON position + * + */ + +static void lschl_power_off(void) +{ + arm_machine_restart('h', NULL); +} + +/***************************************************************************** + * General Setup + ****************************************************************************/ +#define LSCHL_GPIO_USB_POWER 9 +#define LSCHL_GPIO_AUTO_POWER 17 +#define LSCHL_GPIO_POWER 18 + +/**************************************************************************** + * GPIO Attached Keys + ****************************************************************************/ +#define LSCHL_GPIO_KEY_FUNC 15 +#define LSCHL_GPIO_KEY_POWER 8 +#define LSCHL_GPIO_KEY_AUTOPOWER 10 +#define LSCHL_SW_POWER 0x00 +#define LSCHL_SW_AUTOPOWER 0x01 +#define LSCHL_SW_FUNC 0x02 + +static struct gpio_keys_button lschl_buttons[] = { + { + .type = EV_SW, + .code = LSCHL_SW_POWER, + .gpio = LSCHL_GPIO_KEY_POWER, + .desc = "Power-on Switch", + .active_low = 1, + }, { + .type = EV_SW, + .code = LSCHL_SW_AUTOPOWER, + .gpio = LSCHL_GPIO_KEY_AUTOPOWER, + .desc = "Power-auto Switch", + .active_low = 1, + }, { + .type = EV_SW, + .code = LSCHL_SW_FUNC, + .gpio = LSCHL_GPIO_KEY_FUNC, + .desc = "Function Switch", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data lschl_button_data = { + .buttons = lschl_buttons, + .nbuttons = ARRAY_SIZE(lschl_buttons), +}; + +static struct platform_device lschl_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &lschl_button_data, + }, +}; + +#define LSCHL_GPIO_HDD_POWER 1 + +/**************************************************************************** + * GPIO Fan + ****************************************************************************/ + +#define LSCHL_GPIO_FAN_LOW 16 +#define LSCHL_GPIO_FAN_HIGH 14 +#define LSCHL_GPIO_FAN_LOCK 6 + +static struct gpio_fan_alarm lschl_alarm = { + .gpio = LSCHL_GPIO_FAN_LOCK, +}; + +static struct gpio_fan_speed lschl_speeds[] = { + { + .rpm = 0, + .ctrl_val = 3, + }, { + .rpm = 1500, + .ctrl_val = 2, + }, { + .rpm = 3250, + .ctrl_val = 1, + }, { + .rpm = 5000, + .ctrl_val = 0, + }, +}; + +static int lschl_gpio_list[] = { + LSCHL_GPIO_FAN_HIGH, LSCHL_GPIO_FAN_LOW, +}; + +static struct gpio_fan_platform_data lschl_fan_data = { + .num_ctrl = ARRAY_SIZE(lschl_gpio_list), + .ctrl = lschl_gpio_list, + .alarm = &lschl_alarm, + .num_speed = ARRAY_SIZE(lschl_speeds), + .speed = lschl_speeds, +}; + +static struct platform_device lschl_fan_device = { + .name = "gpio-fan", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &lschl_fan_data, + }, +}; + +/**************************************************************************** + * GPIO Data + ****************************************************************************/ + +static struct orion5x_mpp_mode lschl_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* LED POWER */ + { 1, MPP_GPIO }, /* HDD POWER */ + { 2, MPP_GPIO }, /* LED ALARM */ + { 3, MPP_GPIO }, /* LED INFO */ + { 4, MPP_UNUSED }, + { 5, MPP_UNUSED }, + { 6, MPP_GPIO }, /* FAN LOCK */ + { 7, MPP_GPIO }, /* SW INIT */ + { 8, MPP_GPIO }, /* SW POWER */ + { 9, MPP_GPIO }, /* USB POWER */ + { 10, MPP_GPIO }, /* SW AUTO POWER */ + { 11, MPP_UNUSED }, + { 12, MPP_UNUSED }, + { 13, MPP_UNUSED }, + { 14, MPP_GPIO }, /* FAN HIGH */ + { 15, MPP_GPIO }, /* SW FUNC */ + { 16, MPP_GPIO }, /* FAN LOW */ + { 17, MPP_GPIO }, /* LED FUNC */ + { 18, MPP_UNUSED }, + { 19, MPP_UNUSED }, + { -1 }, +}; + +static void __init lschl_init(void) +{ + /* + * Setup basic Orion functions. Needs to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(lschl_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_ehci1_init(); + orion5x_eth_init(&lschl_eth_data); + orion5x_i2c_init(); + orion5x_sata_init(&lschl_sata_data); + orion5x_uart0_init(); + orion5x_xor_init(); + + orion5x_setup_dev_boot_win(LSCHL_NOR_BOOT_BASE, + LSCHL_NOR_BOOT_SIZE); + platform_device_register(&lschl_nor_flash); + + platform_device_register(&lschl_leds); + + platform_device_register(&lschl_button_device); + + platform_device_register(&lschl_fan_device); + + i2c_register_board_info(0, &lschl_i2c_rtc, 1); + + /* usb power on */ + gpio_set_value(LSCHL_GPIO_USB_POWER, 1); + + /* register power-off method */ + pm_power_off = lschl_power_off; + + pr_info("%s: finished\n", __func__); +} + +MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)") + /* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */ + .boot_params = 0x00000100, + .init_machine = lschl_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END |
