diff options
Diffstat (limited to 'arch/arm64/boot')
180 files changed, 6477 insertions, 2787 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 3543bc324553..4690364d584b 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -23,5 +23,6 @@ subdir-y += rockchip subdir-y += socionext subdir-y += sprd subdir-y += synaptics +subdir-y += ti subdir-y += xilinx subdir-y += zte diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index c31f90a49481..9ffa7a038791 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -1,9 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts new file mode 100644 index 000000000000..eac4793c8502 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Amarula A64-Relic"; + compatible = "amarula,a64-relic", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dcdc1>; + /* + * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but + * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with + * 0Ohm register to vcc-io-wifi so eldo1 is used. + */ + vqmmc-supply = <®_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* WL-WAKE-AP: PL3 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ + }; +}; + +#include "axp803.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi-dsi-sensor"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "dovdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 0716b1441187..094cfed13df9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -296,6 +296,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index e2dce48fa29a..98dbff19f5cc 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -195,6 +195,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 3b3081b10ecb..3f531393eaee 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -214,6 +214,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index bf42690a3361..1221764f5719 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -191,6 +191,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index a75825798a71..1b9b92e541d2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -229,6 +229,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + /* On Euler connector */ &spdif { status = "disabled"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts new file mode 100644 index 000000000000..897e60cbe38d --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> + * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> + * + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Pinebook"; + compatible = "pine64,pinebook", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + ethernet0 = &rtl8723cs; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 0>; + brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; + default-brightness-level = <2>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + + framebuffer-lcd { + panel-supply = <®_dc1sw>; + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + lid_switch { + label = "Lid Switch"; + gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */ + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; +}; + +&ehci0 { + phys = <&usbphy 0>; + phy-names = "usb"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo4>; + vqmmc-supply = <®_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_eldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + status = "okay"; +}; + +&ohci0 { + phys = <&usbphy 0>; + phy-names = "usb"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* The ANX6345 eDP-bridge is on r_i2c */ +&r_i2c { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins_a>; + status = "okay"; +}; + +#include "axp803.dtsi" + +®_aldo1 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-csi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi"; +}; + +®_dldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-edp"; +}; + +®_dldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-1v8-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; +}; + +&usbphy { + usb0_vbus-supply = <®_ldo_io0>; + usb1_vbus-supply = <®_ldo_io0>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index abe179de35d7..c21f2331add6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -134,6 +134,10 @@ regulator-name = "vcc-wifi"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index 43418bd881d8..6723b8695e0b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -45,6 +45,8 @@ #include "sun50i-a64.dtsi" +#include <dt-bindings/gpio/gpio.h> + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -52,6 +54,7 @@ non-removable; disable-wp; bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; @@ -66,6 +69,18 @@ }; }; +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + #include "axp803.dtsi" ®_aldo2 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index d9baab3dc96b..81f8e0098699 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -38,6 +38,7 @@ gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ linux,input-type = <EV_SW>; linux,code = <SW_LID>; + wakeup-source; }; }; @@ -210,7 +211,7 @@ ®_dldo3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-name = "eDP12"; + regulator-name = "vdd-edp"; }; ®_dldo4 { @@ -253,6 +254,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 1b2ef28c42bd..d3daf90a8715 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -43,9 +43,12 @@ */ #include <dt-bindings/clock/sun50i-a64-ccu.h> +#include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/sun50i-a64-ccu.h> +#include <dt-bindings/reset/sun8i-de2.h> +#include <dt-bindings/reset/sun8i-r-ccu.h> / { interrupt-parent = <&gic>; @@ -57,17 +60,21 @@ #size-cells = <1>; ranges; -/* - * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU. - * However there is no support for this clock on A64 yet, so we depend - * on the upstream clocks here to keep them (and thus CLK_MIXER0) up. - */ simplefb_lcd: framebuffer-lcd { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "mixer0-lcd0"; clocks = <&ccu CLK_TCON0>, - <&ccu CLK_DE>, <&ccu CLK_BUS_DE>; + <&display_clocks CLK_MIXER0>; + status = "disabled"; + }; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "mixer1-lcd1-hdmi"; + clocks = <&display_clocks CLK_MIXER1>, + <&ccu CLK_TCON1>, <&ccu CLK_HDMI>; status = "disabled"; }; }; @@ -168,10 +175,46 @@ #size-cells = <1>; ranges; + de2@1000000 { + compatible = "allwinner,sun50i-a64-de2"; + reg = <0x1000000 0x400000>; + allwinner,sram = <&de2_sram 1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000000 0x400000>; + + display_clocks: clock@0 { + compatible = "allwinner,sun50i-a64-de2-clk"; + reg = <0x0 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + syscon: syscon@1c00000 { - compatible = "allwinner,sun50i-a64-system-controller", - "syscon"; + compatible = "allwinner,sun50i-a64-system-control"; reg = <0x01c00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@18000 { + compatible = "mmio-sram"; + reg = <0x00018000 0x28000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00018000 0x28000>; + + de2_sram: sram-section@0 { + compatible = "allwinner,sun50i-a64-sram-c"; + reg = <0x0000 0x28000>; + }; + }; }; dma: dma-controller@1c02000 { @@ -364,6 +407,11 @@ bias-pull-up; }; + pwm_pin: pwm_pin { + pins = "PD22"; + function = "pwm"; + }; + rmii_pins: rmii_pins { pins = "PD10", "PD11", "PD13", "PD14", "PD17", "PD18", "PD19", "PD20", "PD22", "PD23"; @@ -608,8 +656,6 @@ clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; mdio: mdio { compatible = "snps,dwmac-mdio"; @@ -629,11 +675,25 @@ #interrupt-cells = <3>; }; + pwm: pwm@1c21400 { + compatible = "allwinner,sun50i-a64-pwm", + "allwinner,sun5i-a13-pwm"; + reg = <0x01c21400 0x400>; + clocks = <&osc24M>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "rtc-osc32k", "rtc-osc32k-out"; + clocks = <&osc32k>; + #clock-cells = <1>; }; r_intc: interrupt-controller@1f00c00 { @@ -655,6 +715,29 @@ #reset-cells = <1>; }; + r_i2c: i2c@1f02400 { + compatible = "allwinner,sun50i-a64-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01f02400 0x400>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_APB0_I2C>; + resets = <&r_ccu RST_APB0_I2C>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + r_pwm: pwm@1f03800 { + compatible = "allwinner,sun50i-a64-pwm", + "allwinner,sun5i-a13-pwm"; + reg = <0x01f03800 0x400>; + clocks = <&osc24M>; + pinctrl-names = "default"; + pinctrl-0 = <&r_pwm_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun50i-a64-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -666,6 +749,16 @@ interrupt-controller; #interrupt-cells = <3>; + r_i2c_pins_a: i2c-a { + pins = "PL8", "PL9"; + function = "s_i2c"; + }; + + r_pwm_pin: pwm { + pins = "PL10"; + function = "s_pwm"; + }; + r_rsb_pins: rsb { pins = "PL0", "PL1"; function = "s_rsb"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 98862c7c7258..3e0d5a9c096d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -207,6 +207,18 @@ status = "okay"; }; +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index b6f2d6b2ecae..48daec7f78ba 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -20,11 +20,159 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + label = "pine-h64:green:heartbeat"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; + + link { + label = "pine-h64:white:link"; + gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */ + }; + + status { + label = "pine-h64:blue:status"; + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_cldo1>; + vqmmc-supply = <®_bldo2>; + non-removable; + cap-mmc-hw-reset; + bus-width = <8>; + status = "okay"; }; &r_i2c { status = "okay"; + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ac200"; + }; + + reg_aldo3: aldo3 { + /* This regulator is connected with CLDO1 */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-1"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-io"; + }; + + reg_bldo3: bldo3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dcxoio"; + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + /* This regulator is connected with ALDO3 */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-2"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index c72da8cd9ef5..cfa5fffcf62b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -5,7 +5,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> +#include <dt-bindings/clock/sun50i-h6-r-ccu.h> #include <dt-bindings/reset/sun50i-h6-ccu.h> +#include <dt-bindings/reset/sun50i-h6-r-ccu.h> / { interrupt-parent = <&gic>; @@ -124,12 +126,71 @@ interrupt-controller; #interrupt-cells = <3>; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC1", "PC4", "PC5", "PC6", + "PC7", "PC8", "PC9", "PC10", + "PC11", "PC12", "PC13", "PC14"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + uart0_ph_pins: uart0-ph { pins = "PH0", "PH1"; function = "uart0"; }; }; + mmc0: mmc@4020000 { + compatible = "allwinner,sun50i-h6-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x04020000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@4021000 { + compatible = "allwinner,sun50i-h6-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x04021000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@4022000 { + compatible = "allwinner,sun50i-h6-emmc", + "allwinner,sun50i-a64-emmc"; + reg = <0x04022000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + uart0: serial@5000000 { compatible = "snps,dw-apb-uart"; reg = <0x05000000 0x400>; @@ -198,7 +259,7 @@ reg = <0x07022000 0x400>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu 2>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -215,8 +276,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07081400 0x400>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu 8>; - resets = <&r_ccu 4>; + clocks = <&r_ccu CLK_R_APB2_I2C>; + resets = <&r_ccu RST_R_APB2_I2C>; pinctrl-names = "default"; pinctrl-0 = <&r_i2c_pins>; status = "disabled"; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 67dac595dc72..d033da401c26 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -119,6 +119,12 @@ #clock-cells = <0>; compatible = "fixed-clock"; }; + + qspi_clk: qspi-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; }; gmac0: ethernet@ff800000 { @@ -127,8 +133,8 @@ interrupts = <0 90 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; - resets = <&rst EMAC0_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC0_CLK>; clock-names = "stmmaceth"; status = "disabled"; @@ -140,8 +146,8 @@ interrupts = <0 91 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; - resets = <&rst EMAC1_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC1_CLK>; clock-names = "stmmaceth"; status = "disabled"; @@ -153,8 +159,8 @@ interrupts = <0 92 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; - resets = <&rst EMAC2_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC2_CLK>; clock-names = "stmmaceth"; status = "disabled"; @@ -310,6 +316,7 @@ resets = <&rst SPIM0_RESET>; reg-io-width = <4>; num-cs = <4>; + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; status = "disabled"; }; @@ -322,6 +329,7 @@ resets = <&rst SPIM1_RESET>; reg-io-width = <4>; num-cs = <4>; + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; status = "disabled"; }; @@ -407,6 +415,7 @@ phy-names = "usb2-phy"; resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + clocks = <&clkmgr STRATIX10_USB_CLK>; status = "disabled"; }; @@ -418,6 +427,7 @@ phy-names = "usb2-phy"; resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + clocks = <&clkmgr STRATIX10_USB_CLK>; status = "disabled"; }; @@ -426,6 +436,7 @@ reg = <0xffd00200 0x100>; interrupts = <0 117 4>; resets = <&rst WATCHDOG0_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -434,6 +445,7 @@ reg = <0xffd00300 0x100>; interrupts = <0 118 4>; resets = <&rst WATCHDOG1_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -442,6 +454,7 @@ reg = <0xffd00400 0x100>; interrupts = <0 125 4>; resets = <&rst WATCHDOG2_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -450,6 +463,7 @@ reg = <0xffd00500 0x100>; interrupts = <0 126 4>; resets = <&rst WATCHDOG3_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -464,5 +478,20 @@ interrupts = <16 4>, <48 4>; }; }; + + qspi: spi@ff8d2000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff8d2000 0x100>, + <0xff900000 0x100000>; + interrupts = <0 3 4>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + clocks = <&qspi_clk>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index f9b1ef12db48..6edc4fa9fd42 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -147,3 +147,38 @@ reg = <0x68>; }; }; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00a"; + reg = <0>; + spi-max-frequency = <50000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x4000000>; + }; + + qspi_rootfs: partition@4000000 { + label = "Root Filesystem - JFFS2"; + reg = <0x4000000 0x4000000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 34dd0e9b5cbb..a97c0e2d7bc6 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -17,6 +17,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index dff9b15eb3c0..d5c01427a5ca 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -6,21 +6,75 @@ /dts-v1/; #include "meson-axg.dtsi" +#include <dt-bindings/input/input.h> / { compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; model = "Amlogic Meson AXG S400 Development Board"; + adc_keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-next { + label = "Next"; + linux,code = <KEY_NEXT>; + press-threshold-microvolt = <1116000>; /* 62% */ + }; + + button-prev { + label = "Previous"; + linux,code = <KEY_PREVIOUS>; + press-threshold-microvolt = <900000>; /* 50% */ + }; + + button-wifi { + label = "Wifi"; + linux,code = <KEY_WLAN>; + press-threshold-microvolt = <684000>; /* 38% */ + }; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <468000>; /* 26% */ + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <252000>; /* 14% */ + }; + + button-voice { + label = "Voice"; + linux,code = <KEY_VOICECOMMAND>; + press-threshold-microvolt = <0>; /* 0% */ + }; + }; + aliases { serial0 = &uart_AO; serial1 = &uart_A; }; + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; }; vddao_3v3: regulator-vddao_3v3 { @@ -28,6 +82,8 @@ regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; }; vddio_ao18: regulator-vddio_ao18 { @@ -35,6 +91,8 @@ regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; }; vcc_3v3: regulator-vcc_3v3 { @@ -42,6 +100,30 @@ regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; }; emmc_pwrseq: emmc-pwrseq { @@ -62,6 +144,66 @@ clock-frequency = <32768>; pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ }; + + speaker-leds { + compatible = "gpio-leds"; + + aled1 { + label = "speaker:aled1"; + gpios = <&gpio_speaker 7 0>; + }; + + aled2 { + label = "speaker:aled2"; + gpios = <&gpio_speaker 6 0>; + }; + + aled3 { + label = "speaker:aled3"; + gpios = <&gpio_speaker 5 0>; + }; + + aled4 { + label = "speaker:aled4"; + gpios = <&gpio_speaker 4 0>; + }; + + aled5 { + label = "speaker:aled5"; + gpios = <&gpio_speaker 3 0>; + }; + + aled6 { + label = "speaker:aled6"; + gpios = <&gpio_speaker 2 0>; + }; + }; + + linein: audio-codec@0 { + #sound-dai-cells = <0>; + compatible = "everest,es7241"; + VDDA-supply = <&vcc_3v3>; + VDDP-supply = <&vcc_3v3>; + VDDD-supply = <&vcc_3v3>; + status = "okay"; + sound-name-prefix = "Linein"; + }; + + lineout: audio-codec@1 { + #sound-dai-cells = <0>; + compatible = "everest,es7154"; + VDD-supply = <&vcc_3v3>; + PVDD-supply = <&vcc_5v>; + status = "okay"; + sound-name-prefix = "Lineout"; + }; + + spdif_dit: audio-codec@2 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; }; ðmac { @@ -106,12 +248,33 @@ status = "okay"; pinctrl-0 = <&i2c1_z_pins>; pinctrl-names = "default"; + + speaker_amp1: audio-codec@1b { + compatible = "ti,tas5707"; + reg = <0x1b>; + reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + AVDD-supply = <&vcc_3v3>; + DVDD-supply = <&vcc_3v3>; + PVDD_A-supply = <&main_12v>; + PVDD_B-supply = <&main_12v>; + PVDD_C-supply = <&main_12v>; + PVDD_D-supply = <&main_12v>; + }; }; &i2c_AO { status = "okay"; pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; pinctrl-names = "default"; + + gpio_speaker: gpio-controller@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vddao_3v3>; + }; }; &pwm_ab { @@ -166,3 +329,8 @@ compatible = "brcm,bcm4329-fmac"; }; }; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 67d7115e4eff..c518130e5ce7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/axg-clkc.h> #include <dt-bindings/clock/axg-aoclkc.h> #include <dt-bindings/gpio/meson-axg-gpio.h> @@ -91,6 +92,39 @@ method = "smc"; }; + tdmif_a: audio-controller@0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller@1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller@2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -155,6 +189,157 @@ }; }; + audio: bus@ff642000 { + compatible = "simple-bus"; + reg = <0x0 0xff642000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + }; + cbus: bus@ffd00000 { compatible = "simple-bus"; reg = <0x0 0xffd00000 0x0 0x25000>; @@ -477,6 +662,48 @@ }; }; + pdm_dclk_a14_pins: pdm_dclk_a14 { + mux { + groups = "pdm_dclk_a14"; + function = "pdm"; + }; + }; + + pdm_dclk_a19_pins: pdm_dclk_a19 { + mux { + groups = "pdm_dclk_a19"; + function = "pdm"; + }; + }; + + pdm_din0_pins: pdm_din0 { + mux { + groups = "pdm_din0"; + function = "pdm"; + }; + }; + + pdm_din1_pins: pdm_din1 { + mux { + groups = "pdm_din1"; + function = "pdm"; + }; + }; + + pdm_din2_pins: pdm_din2 { + mux { + groups = "pdm_din2"; + function = "pdm"; + }; + }; + + pdm_din3_pins: pdm_din3 { + mux { + groups = "pdm_din3"; + function = "pdm"; + }; + }; + pwm_a_a_pins: pwm_a_a { mux { groups = "pwm_a_a"; @@ -561,6 +788,76 @@ }; }; + spdif_in_z_pins: spdif_in_z { + mux { + groups = "spdif_in_z"; + function = "spdif_in"; + }; + }; + + spdif_in_a1_pins: spdif_in_a1 { + mux { + groups = "spdif_in_a1"; + function = "spdif_in"; + }; + }; + + spdif_in_a7_pins: spdif_in_a7 { + mux { + groups = "spdif_in_a7"; + function = "spdif_in"; + }; + }; + + spdif_in_a19_pins: spdif_in_a19 { + mux { + groups = "spdif_in_a19"; + function = "spdif_in"; + }; + }; + + spdif_in_a20_pins: spdif_in_a20 { + mux { + groups = "spdif_in_a20"; + function = "spdif_in"; + }; + }; + + spdif_out_z_pins: spdif_out_z { + mux { + groups = "spdif_out_z"; + function = "spdif_out"; + }; + }; + + spdif_out_a1_pins: spdif_out_a1 { + mux { + groups = "spdif_out_a1"; + function = "spdif_out"; + }; + }; + + spdif_out_a11_pins: spdif_out_a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + }; + }; + + spdif_out_a19_pins: spdif_out_a19 { + mux { + groups = "spdif_out_a19"; + function = "spdif_out"; + }; + }; + + spdif_out_a20_pins: spdif_out_a20 { + mux { + groups = "spdif_out_a20"; + function = "spdif_out"; + }; + }; + spi0_pins: spi0 { mux { groups = "spi0_miso", @@ -1194,6 +1491,20 @@ interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; + + saradc: adc@9000 { + compatible = "amlogic,meson-axg-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x38>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 88e712ea757a..765247bc4f24 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -35,6 +35,13 @@ regulator-always-on; }; + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; @@ -140,6 +147,11 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -160,11 +172,6 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; }; /* SD card */ diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 7d5709c37e95..cbe99bd4e06d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -106,6 +106,42 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + /* CVBS is available on CON1 pin 36, disabled by default */ + cvbs-connector { + compatible = "composite-video-connector"; + status = "disabled"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; ðmac { @@ -137,6 +173,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts new file mode 100644 index 000000000000..70433e023fda --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S805X) P241 Development Board"; + + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x20000000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + status = "okay"; +}; + +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index a9f9bb90a877..15014faa2ab2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -41,13 +41,6 @@ }; }; - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -108,7 +101,9 @@ }; }; -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts index 80a231476b80..92c425d0259c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts new file mode 100644 index 000000000000..6509c4950950 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * Based on meson-gxl-s905d-p231.dts: + * - Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "amlogic,p281", "amlogic,s905w", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905W) P281 Development Board"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts new file mode 100644 index 000000000000..789c819c99c4 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * Based on meson-gxl-s905d-p231.dts: + * - Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl"; + model = "Oranth Tanix TX3 Mini"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */ + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 0868da476e41..313f88f8759e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -209,10 +209,34 @@ #cooling-cells = <2>; }; +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; + &cpu4 { #cooling-cells = <2>; }; +&cpu5 { + #cooling-cells = <2>; +}; + +&cpu6 { + #cooling-cells = <2>; +}; + +&cpu7 { + #cooling-cells = <2>; +}; + ðmac { pinctrl-0 = <ð_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 101417298a1d..73d656e4aade 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -40,13 +40,6 @@ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; }; }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; }; /* Q200 has exclusive choice between internal or external PHY */ @@ -79,7 +72,9 @@ }; }; -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts index 8d132b17514a..d02b80d77378 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 2c5db03f226c..b2b7ced633cf 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -63,7 +63,7 @@ }; idle-states { - entry-method = "arm,psci"; + entry-method = "psci"; CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index c51950f4a1b6..ab77adb4f3c2 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -63,7 +63,7 @@ }; idle-states { - entry-method = "arm,psci"; + entry-method = "psci"; CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 2b2bf39c30ef..1fb5c5a0f32e 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -62,7 +62,7 @@ }; idle-states { - entry-method = "arm,psci"; + entry-method = "psci"; CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile index c4d06cffcb11..20c7d0aa6cb7 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/Makefile +++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile @@ -1,3 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb + +dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958802a802x.dtb diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index 8862ec907fd8..bc299c3d9068 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -30,20 +30,9 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "stingray.dtsi" +#include "stingray-board-base.dtsi" / { - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - serial0 = &uart1; - serial1 = &uart0; - serial2 = &uart2; - serial3 = &uart3; - }; - sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl { compatible = "regulator-gpio"; regulator-name = "sdio0_vddo_ctrl_reg"; @@ -67,11 +56,6 @@ }; }; -&memory { /* Default DRAM banks */ - reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ - <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ -}; - &sata0 { status = "okay"; }; @@ -136,18 +120,6 @@ status = "okay"; }; -&mdio_mux_iproc { - mdio@10 { - gphy0: eth-phy@10 { - reg = <0x10>; - }; - }; -}; - -&uart1 { - status = "okay"; -}; - &pwm { status = "okay"; }; @@ -175,8 +147,6 @@ }; &enet { - phy-mode = "rgmii-id"; - phy-handle = <&gphy0>; status = "okay"; }; @@ -197,13 +167,10 @@ &sdio0 { vqmmc-supply = <&sdio0_vddo_ctrl_reg>; - non-removable; - full-pwr-cycle; status = "okay"; }; &sdio1 { vqmmc-supply = <&sdio1_vddo_ctrl_reg>; - full-pwr-cycle; status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts new file mode 100644 index 000000000000..a41facd7d79b --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + *Copyright(c) 2018 Broadcom + */ + +/dts-v1/; + +#include "stingray-board-base.dtsi" + +/ { + compatible = "brcm,bcm958802a802x", "brcm,stingray"; + model = "Stingray PS225xx (BCM958802A802x)"; +}; + +&enet { + status = "disabled"; +}; + +&sdio0 { + no-1-8-v; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi new file mode 100644 index 000000000000..82a24711d0d8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + * Copyright(c) 2016-2018 Broadcom + */ + +#include "stingray.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart0; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&memory { /* Default DRAM banks */ + reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ + <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ +}; + +&enet { + phy-mode = "rgmii-id"; + phy-handle = <&gphy0>; +}; + +&uart1 { + status = "okay"; +}; + +&sdio0 { + non-removable; + full-pwr-cycle; +}; + +&sdio1 { + full-pwr-cycle; +}; + +&mdio_mux_iproc { + mdio@10 { + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi index 3a4d4524b5ed..10a106aca229 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi @@ -52,12 +52,24 @@ reg = <0x0001d104 0x32>, <0x0001c854 0x4>; clocks = <&osc>; - clock-output-names = "genpll0", "clk_125", "clk_scr", + clock-output-names = "genpll0", "clk_125m", "clk_scr", "clk_250", "clk_pcie_axi", "clk_paxc_axi_x2", "clk_paxc_axi"; }; + genpll2: genpll2@1d1ac { + #clock-cells = <1>; + compatible = "brcm,sr-genpll2"; + reg = <0x0001d1ac 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll2", "clk_nic", + "clk_ts_500_ref", "clk_125_nitro", + "clk_chimp", "clk_nic_flash", + "clk_fs"; + }; + genpll3: genpll3@1d1e0 { #clock-cells = <1>; compatible = "brcm,sr-genpll3"; @@ -75,8 +87,8 @@ <0x0001c854 0x4>; clocks = <&osc>; clock-output-names = "genpll4", "clk_ccn", - "clk_tpiu_pll", "noc_clk", - "pll_chclk_fs4", + "clk_tpiu_pll", "clk_noc", + "clk_chclk_fs4", "clk_bridge_fscpu"; }; @@ -86,8 +98,8 @@ reg = <0x0001d248 0x32>, <0x0001c870 0x4>; clocks = <&osc>; - clock-output-names = "genpll5", "fs4_hf_clk", - "crypto_ae_clk", "raid_ae_clk"; + clock-output-names = "genpll5", "clk_fs4_hf", + "clk_crypto_ae", "clk_raid_ae"; }; lcpll0: lcpll0@1d0c4 { @@ -107,9 +119,9 @@ reg = <0x0001d138 0x3c>, <0x0001c870 0x4>; clocks = <&osc>; - clock-output-names = "lcpll1", "clk_wanpn", + clock-output-names = "lcpll1", "clk_wan", "clk_usb_ref", - "timesync_evt_clk"; + "clk_crmu_ts"; }; hsls_clk: hsls_clk { diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi new file mode 100644 index 000000000000..33a472ab17e8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + *Copyright(c) 2018 Broadcom + */ + +pcie8: pcie@60400000 { + compatible = "brcm,iproc-pcie-paxc-v2"; + reg = <0 0x60400000 0 0x1000>; + linux,pci-domain = <8>; + + bus-range = <0x0 0x1>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x83000000 0 0x10000000 0 0x10000000 0 0x20000000>; + + dma-coherent; + + msi-map = <0x100 &gic_its 0x2000 0x1>, /* PF0 */ + <0x108 &gic_its 0x2040 0x8>, /* PF0-VF0-7 */ + <0x101 &gic_its 0x2080 0x1>, /* PF1 */ + <0x110 &gic_its 0x20c8 0x8>, /* PF1-VF8-15 */ + <0x102 &gic_its 0x2100 0x1>, /* PF2 */ + <0x118 &gic_its 0x2150 0x8>, /* PF2-VF16-23 */ + <0x103 &gic_its 0x2180 0x1>, /* PF3 */ + <0x120 &gic_its 0x21d8 0x8>, /* PF3-VF24-31 */ + <0x104 &gic_its 0x2200 0x1>, /* PF4 */ + <0x128 &gic_its 0x2260 0x8>, /* PF4-VF32-39 */ + <0x105 &gic_its 0x2280 0x1>, /* PF5 */ + <0x130 &gic_its 0x22e8 0x8>, /* PF5-VF40-47 */ + <0x106 &gic_its 0x2300 0x1>, /* PF6 */ + <0x138 &gic_its 0x2370 0x8>, /* PF6-VF48-55 */ + <0x107 &gic_its 0x2380 0x1>, /* PF7 */ + <0x140 &gic_its 0x23f8 0x8>; /* PF7-VF56-63 */ + + phys = <&pcie_phy 8>; + phy-names = "pcie-phy"; +}; + +pcie-ss { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40000000 0x800>; + + pcie_phy: phy@0 { + compatible = "brcm,sr-pcie-phy"; + reg = <0x0 0x200>; + brcm,sr-cdru = <&cdru>; + brcm,sr-mhb = <&mhb>; + #phy-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index a70e8ddbd66f..e283480bfc7e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -146,6 +146,11 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; + scr { compatible = "simple-bus"; #address-cells = <1>; @@ -258,6 +263,18 @@ #include "stingray-clock.dtsi" + otp: otp@1c400 { + compatible = "brcm,ocotp-v2"; + reg = <0x0001c400 0x68>; + brcm,ocotp-size = <2048>; + status = "okay"; + }; + + cdru: syscon@1d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0x0001d000 0x400>; + }; + gpio_crmu: gpio@24800 { compatible = "brcm,iproc-gpio"; reg = <0x00024800 0x4c>; @@ -269,6 +286,7 @@ #include "stingray-fs4.dtsi" #include "stingray-sata.dtsi" + #include "stingray-pcie.dtsi" hsls { compatible = "simple-bus"; @@ -420,6 +438,7 @@ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>; clock-names = "wdogclk", "apb_pclk"; + timeout-sec = <60>; }; gpio_hsls: gpio@d0000 { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi deleted file mode 100644 index f0803575fd9f..000000000000 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5433 TMU sensor configuration - * - * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <23>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <75>; -samsung,tmu_min_efuse_value = <40>; -samsung,tmu_max_efuse_value = <150>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_mux_addr = <6>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi deleted file mode 100644 index cccae662228a..000000000000 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5433 TMU sensor configuration - * - * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <75>; -samsung,tmu_min_efuse_value = <40>; -samsung,tmu_max_efuse_value = <150>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 038c99792ccb..2131f12364cb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -630,7 +630,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, <&cmu_peris CLK_SCLK_TMU0>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -641,7 +641,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, <&cmu_peris CLK_SCLK_TMU0>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -652,7 +652,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, <&cmu_peris CLK_SCLK_TMU1>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-g3d-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -663,7 +663,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, <&cmu_peris CLK_SCLK_TMU1>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -674,7 +674,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, <&cmu_peris CLK_SCLK_TMU1>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -1171,7 +1171,7 @@ power-domains = <&pd_gscl>; }; - sysmmu_scaler_0: sysmmu@0x15040000 { + sysmmu_scaler_0: sysmmu@15040000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15040000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; @@ -1182,7 +1182,7 @@ power-domains = <&pd_mscl>; }; - sysmmu_scaler_1: sysmmu@0x15050000 { + sysmmu_scaler_1: sysmmu@15050000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15050000 0x1000>; interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi deleted file mode 100644 index 48494710b7b2..000000000000 --- a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos7 TMU sensor configuration - * - * Copyright (c) 2016 Samsung Electronics Co., Ltd. - * http://www.samsung.com - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <9>; -samsung,tmu_reference_voltage = <17>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <75>; -samsung,tmu_min_efuse_value = <15>; -samsung,tmu_max_efuse_value = <100>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 93a84338938a..75ad724c487e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -589,7 +589,7 @@ clocks = <&clock_peris PCLK_TMU>, <&clock_peris SCLK_TMU>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos7-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; thermal-zones { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts index 7286b1ebfd7a..f90c040fd5e8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A Freedom Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index cdc4aee75227..2fb1cb1f7d8f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A QDS Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index c1a119effa61..5edb1e137a52 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A RDB Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 205f0f4c5df0..68ac78c4564d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1012A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -79,7 +43,7 @@ * PSCI node is not added default, U-boot will add missing * parts if it determines to use PSCI. */ - entry-method = "arm,psci"; + entry-method = "psci"; CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi index 169e171407a6..6082ae022136 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree nodes for ls1043 * * Copyright 2015-2016 Freescale Semiconductor Inc. - * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &soc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 6341281485cf..c7b8d2c009cd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 3dc0c8e9663d..7b01ba8d3b7e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 1109f22bda5e..7881e3d81a9a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/thermal/thermal.h> @@ -80,8 +43,8 @@ reg = <0x0>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; - #cooling-cells = <2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -91,6 +54,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -100,6 +64,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -109,6 +74,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; l2: l2-cache { @@ -121,7 +87,7 @@ * PSCI node is not added default, U-boot will add missing * parts if it determines to use PSCI. */ - entry-method = "arm,psci"; + entry-method = "psci"; CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi index f5017dba0f17..d6caaea57d90 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree nodes for ls1046 * * Copyright 2015-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &soc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index 434383bade0e..e69306e6b0b1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Shaohui Xie <Shaohui.Xie@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 5dc2782e2a58..440e111651d5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu <mingkai.hu@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 136ebfa9b333..ef83786b8b90 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu <mingkai.hu@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -87,6 +50,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -96,6 +60,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -105,6 +70,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; l2: l2-cache { @@ -117,7 +83,7 @@ * PSCI node is not added default, U-boot will add missing * parts if it determines to use PSCI. */ - entry-method = "arm,psci"; + entry-method = "psci"; CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 30128051d0c0..6f48d21b97c0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NXP LS1088A QDS Board. * @@ -5,43 +6,6 @@ * * Harninder Rai <harninder.rai@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 4f17601b919c..8e925df6c01c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NXP LS1088A RDB Board. * @@ -5,43 +6,6 @@ * * Harninder Rai <harninder.rai@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 1c6556bcfddf..a07f612ab56b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for NXP Layerscape-1088A family SoC. * @@ -5,43 +6,6 @@ * * Harninder Rai <harninder.rai@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -76,6 +40,7 @@ reg = <0x1>; clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -84,6 +49,7 @@ reg = <0x2>; clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -92,6 +58,7 @@ reg = <0x3>; clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu4: cpu@100 { @@ -109,6 +76,7 @@ reg = <0x101>; clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu6: cpu@102 { @@ -117,6 +85,7 @@ reg = <0x102>; clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu7: cpu@103 { @@ -125,6 +94,7 @@ reg = <0x103>; clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; CPU_PH20: cpu-ph20 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index 3c99608b9b45..f6c3ee78ace0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a QDS Board. * @@ -7,43 +8,6 @@ * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index a4e7de9f70d8..44894356059c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a RDB Board. * @@ -7,43 +8,6 @@ * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts index fbbb73e571c0..5517305039a4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a software Simulator model * @@ -5,43 +6,6 @@ * * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 8d739301e7b8..f9c1d30cf4a7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * @@ -6,43 +7,6 @@ * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "fsl-ls208xa.dtsi" @@ -65,6 +29,7 @@ clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; cpu2: cpu@100 { @@ -84,6 +49,7 @@ clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; cpu4: cpu@200 { @@ -103,6 +69,7 @@ clocks = <&clockgen 1 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; cpu6: cpu@300 { @@ -122,6 +89,7 @@ clocks = <&clockgen 1 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; cluster0_l2: l2-cache0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts index eaee5b1c3a44..7c17b1bd4529 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2088A QDS Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index c411442cac62..f6b4d75a258b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2088A RDB Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index 0884e1a77901..7c882da3f6b0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2088A family SoC. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "fsl-ls208xa.dtsi" @@ -65,6 +29,7 @@ clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; cpu2: cpu@100 { @@ -84,6 +49,7 @@ clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; cpu4: cpu@200 { @@ -103,6 +69,7 @@ clocks = <&clockgen 1 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; cpu6: cpu@300 { @@ -122,6 +89,7 @@ clocks = <&clockgen 1 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; cluster0_l2: l2-cache0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 1de618801c73..c11f52e7ae9a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080A QDS Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &esdhc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 061647bd97b8..6fd7f63085c9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080A RDB Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &esdhc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 137ef4dfc3e9..8cb78dd99672 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi index ae15307f6e8b..ff1aba5fae7f 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ BMan Portals device tree * * Copyright 2011-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &bportals { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi index ecdffe731b98..dbd2fc3ba790 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 10g port #0 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi index a7f6af56b6a5..6fc5d2560057 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 10g port #1 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi index d600786719fb..4e02276fcf99 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #0 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi index 3c0b76d43043..0312fa43fa77 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #1 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi index 89633afca26a..af2df07971dd 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #2 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi index 87c2b705b1f9..4ac98dc8b227 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #3 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi index 8f4d74b96b67..bd932d8b0160 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #4 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi index d534f770f729..7de1c5203f3e 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #5 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi index 4664c33e0763..263b972a6d1e 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman0: fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi index 6a93a4a9be0e..e3bec08b110d 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ QMan Portals device tree * * Copyright 2011-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &qportals { diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 68c5a6c819ae..c98bcbc8dfba 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -574,21 +574,35 @@ }; &dwmmc1 { + bus-width = <0x4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + cd-inverted; + cd-gpios = <&gpio25 3 0>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; vmmc-supply = <&ldo16>; vqmmc-supply = <&ldo9>; status = "okay"; }; &dwmmc2 { /* WIFI */ + bus-width = <0x4>; + non-removable; broken-cd; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; /* WL_EN */ vmmc-supply = <&wlan_en>; - ti,non-removable; - non-removable; - cap-power-off-card; - keep-power-in-suspend; - #address-cells = <0x1>; - #size-cells = <0x0>; status = "ok"; wlcore: wlcore@2 { diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 851190a719ea..f432b0a88c65 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -61,7 +61,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -75,7 +75,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -87,7 +87,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -99,7 +99,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -111,7 +111,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -125,7 +125,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -137,7 +137,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -149,7 +149,7 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -158,31 +158,40 @@ idle-states { entry-method = "psci"; - CPU_SLEEP: cpu-sleep { + CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <40>; - exit-latency-us = <70>; - min-residency-us = <3000>; + entry-latency-us = <400>; + exit-latency-us = <650>; + min-residency-us = <1500>; }; - CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x1010000>; entry-latency-us = <500>; - exit-latency-us = <5000>; - min-residency-us = <20000>; + exit-latency-us = <1600>; + min-residency-us = <3500>; + }; + + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <400>; + exit-latency-us = <550>; + min-residency-us = <1500>; }; CLUSTER_SLEEP_1: cluster-sleep-1 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <1000>; - exit-latency-us = <5000>; - min-residency-us = <20000>; + entry-latency-us = <800>; + exit-latency-us = <2900>; + min-residency-us = <3500>; }; }; @@ -1020,16 +1029,10 @@ /* SD */ dwmmc1: dwmmc1@ff37f000 { - #address-cells = <1>; - #size-cells = <0>; - cd-inverted; compatible = "hisilicon,hi3660-dw-mshc"; - bus-width = <0x4>; - disable-wp; - cap-sd-highspeed; - supports-highspeed; - card-detect-delay = <200>; reg = <0x0 0xff37f000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_CLK_GATE_SD>, <&crg_ctrl HI3660_HCLK_GATE_SD>; @@ -1037,29 +1040,17 @@ clock-frequency = <3200000>; resets = <&crg_rst 0x94 18>; reset-names = "reset"; - cd-gpios = <&gpio25 3 0>; hisilicon,peripheral-syscon = <&sctrl>; - pinctrl-names = "default"; - pinctrl-0 = <&sd_pmx_func - &sd_clk_cfg_func - &sd_cfg_func>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; + card-detect-delay = <200>; status = "disabled"; - - slot@0 { - reg = <0x0>; - bus-width = <4>; - disable-wp; - }; }; /* SDIO */ dwmmc2: dwmmc2@ff3ff000 { compatible = "hisilicon,hi3660-dw-mshc"; reg = <0x0 0xff3ff000 0x0 0x1000>; + #address-cells = <0x1>; + #size-cells = <0x0>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>, <&crg_ctrl HI3660_HCLK_GATE_SDIO0>; @@ -1067,12 +1058,6 @@ resets = <&crg_rst 0x94 20>; reset-names = "reset"; card-detect-delay = <200>; - supports-highspeed; - keep-power-in-suspend; - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pmx_func - &sdio_clk_cfg_func - &sdio_cfg_func>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 7f12624f6c8e..f4964bee6a1a 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -323,7 +323,6 @@ bus-width = <0x4>; non-removable; cap-power-off-card; - keep-power-in-suspend; vmmc-supply = <®_vdd_3v3>; mmc-pwrseq = <&wl1835_pwrseq>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 586b281cd531..247024df714f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -88,8 +88,8 @@ next-level-cache = <&CLUSTER0_L2>; clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; /* min followed by max */ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <311>; }; @@ -101,6 +101,8 @@ next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu2: cpu@2 { @@ -111,6 +113,8 @@ next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu3: cpu@3 { @@ -121,6 +125,8 @@ next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu4: cpu@100 { @@ -131,6 +137,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu5: cpu@101 { @@ -141,6 +149,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu6: cpu@102 { @@ -151,6 +161,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu7: cpu@103 { @@ -161,6 +173,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; CLUSTER0_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 3353252d78a0..d9531e242eb4 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -22,6 +22,21 @@ serial1 = &uart1; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * The PSCI firmware region depicted below is the default one + * and should be updated by the bootloader. + */ + psci-area@4000000 { + reg = <0 0x4000000 0 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -98,6 +113,12 @@ status = "disabled"; }; + avs: avs@11500 { + compatible = "marvell,armada-3700-avs", + "syscon"; + reg = <0x11500 0x40>; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; reg = <0x12000 0x200>; @@ -287,7 +308,7 @@ }; crypto: crypto@90000 { - compatible = "inside-secure,safexcel-eip97"; + compatible = "inside-secure,safexcel-eip97ies"; reg = <0x90000 0x20000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index a66958ff4de6..56fa44860909 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -91,7 +91,7 @@ }; sfp_eth3: sfp-eth3 { - /* CON3,4 - CPS lane 5 */ + /* CON13,14 - CPS lane 5 */ compatible = "sff,sfp"; i2c-bus = <&sfp_1g_i2c>; los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index 1c6ff8197a88..840c8454d03e 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -398,7 +398,7 @@ }; CP110_LABEL(crypto): crypto@800000 { - compatible = "inside-secure,safexcel-eip197"; + compatible = "inside-secure,safexcel-eip197b"; reg = <0x800000 0x200000>; interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index ac17f60f998c..5b7fd6ad96e4 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 6d8532af8346..75cc0f7cc088 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -119,7 +119,7 @@ }; idle-states { - entry-method = "arm,psci"; + entry-method = "psci"; CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts new file mode 100644 index 000000000000..742938a1a548 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for MediaTek X20 Development Board + * + * Copyright (C) 2018, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "mt6797.dtsi" + +/ { + model = "Mediatek X20 Development Board"; + compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797"; + + aliases { + serial0 = &uart1; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index b7837642c33a..a747b7bf132d 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -18,7 +18,7 @@ compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; chosen { - bootargs = "console=ttyS0,115200n1 swiotlb=512"; + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; }; cpus { @@ -34,7 +34,7 @@ }; gpio-keys { - compatible = "gpio-keys-polled"; + compatible = "gpio-keys"; poll-interval = <100>; factory { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 9213c966c224..de2c47bdbe64 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -89,6 +89,7 @@ <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; enable-method = "psci"; clock-frequency = <1300000000>; }; @@ -286,9 +287,16 @@ pio: pinctrl@10211000 { compatible = "mediatek,mt7622-pinctrl"; - reg = <0 0x10211000 0 0x1000>; + reg = <0 0x10211000 0 0x1000>, + <0 0x10005000 0 0x1000>; + reg-names = "base", "eint"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 103>; + interrupt-controller; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; }; watchdog: watchdog@10212000 { @@ -331,7 +339,7 @@ reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; clocks = <&topckgen CLK_TOP_UART_SEL>, - <&pericfg CLK_PERI_UART1_PD>; + <&pericfg CLK_PERI_UART0_PD>; clock-names = "baud", "bus"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 94597e33c806..abd2f15a544b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -168,6 +168,7 @@ reg = <0x001>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + #cooling-cells = <2>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -193,6 +194,7 @@ reg = <0x101>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + #cooling-cells = <2>; clocks = <&infracfg CLK_INFRA_CA57SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index ecb034177fc2..57d3f00464ce 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -27,15 +27,33 @@ }; cbb { + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; + serial@3110000 { status = "okay"; }; /* SDMMC1 (SD/MMC) */ sdhci@3400000 { -/* cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; -*/ }; /* SDMMC4 (eMMC) */ diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 6322ef265c2f..a4dfcd19b9e8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -18,6 +18,45 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + gpio: gpio@2200000 { + compatible = "nvidia,tegra194-gpio"; + reg-names = "security", "gpio"; + reg = <0x2200000 0x10000>, + <0x2210000 0x10000>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + }; + + ethernet@2490000 { + compatible = "nvidia,tegra186-eqos", + "snps,dwc-qos-ethernet-4.10"; + reg = <0x02490000 0x10000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_AXI_CBB>, + <&bpmp TEGRA194_CLK_EQOS_AXI>, + <&bpmp TEGRA194_CLK_EQOS_RX>, + <&bpmp TEGRA194_CLK_EQOS_TX>, + <&bpmp TEGRA194_CLK_EQOS_PTP_REF>; + clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; + resets = <&bpmp TEGRA194_RESET_EQOS>; + reset-names = "eqos"; + status = "disabled"; + + snps,write-requests = <1>; + snps,read-requests = <3>; + snps,burst-map = <0x7>; + snps,txpbl = <16>; + snps,rxpbl = <8>; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -329,6 +368,73 @@ }; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10000>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10001>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x101>; + enable-method = "psci"; + }; + + cpu@4 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x200>; + enable-method = "psci"; + }; + + cpu@5 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x201>; + enable-method = "psci"; + }; + + cpu@6 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10300>; + enable-method = "psci"; + }; + + cpu@7 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10301>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + status = "okay"; + method = "smc"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 9ff848792712..78ce3979ef09 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -338,7 +338,7 @@ led@6 { label = "apq8016-sbc:blue:bt"; gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bt"; + linux,default-trigger = "bluetooth-power"; default-state = "off"; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 4d5ef01f43a3..0ef90c6554a9 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -19,6 +19,33 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + / { aliases { serial0 = &blsp2_uart1; @@ -130,6 +157,218 @@ status = "okay"; }; + pinctrl@1010000 { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + }; + + qcom,spmi@400f000 { + pmic@0 { + gpios@c000 { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + }; + + mpps@a000 { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; + }; + }; + + pmic@2 { + gpios@c000 { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + }; + }; + }; + phy@34000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index c2625d15a8c0..7b32b8990d62 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -858,9 +858,9 @@ clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "vsync"; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; @@ -883,10 +883,10 @@ <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "vsync"; iommus = <&apps_iommu 4>; @@ -922,12 +922,12 @@ <&gcc GCC_MDSS_BYTE0_CLK>, <&gcc GCC_MDSS_PCLK0_CLK>, <&gcc GCC_MDSS_ESC0_CLK>; - clock-names = "mdp_core_clk", - "iface_clk", - "bus_clk", - "byte_clk", - "pixel_clk", - "core_clk"; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; phys = <&dsi_phy0>; phy-names = "dsi-phy"; @@ -963,7 +963,7 @@ #phy-cells = <0>; clocks = <&gcc GCC_MDSS_AHB_CLK>; - clock-names = "iface_clk"; + clock-names = "iface"; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 8c7f9ca25b53..cd3865e7a270 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -377,6 +377,22 @@ reg = <0x740000 0x20000>; }; + tsens0: thermal-sensor@4a9000 { + compatible = "qcom,msm8996-tsens"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@4ad000 { + compatible = "qcom,msm8996-tsens"; + reg = <0x4ad000 0x1000>, /* TM */ + <0x4ac000 0x1000>; /* SROT */ + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + tcsr: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x7a0000 0x18000>; @@ -459,12 +475,6 @@ status = "disabled"; }; - tsens0: thermal-sensor@4a8000 { - compatible = "qcom,msm8996-tsens"; - reg = <0x4a8000 0x2000>; - #thermal-sensor-cells = <1>; - }; - blsp2_uart1: serial@75b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x75b0000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi new file mode 100644 index 000000000000..4d5aca3eeb69 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */ + +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&spmi_bus { + pm8005_lsid0: pmic@4 { + compatible = "qcom,pm8005", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8005_gpio: gpios@c000 { + compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>; + }; + + }; + + pm8005_lsid1: pmic@5 { + compatible = "qcom,pm8005", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi new file mode 100644 index 000000000000..92bed1e7d4bb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */ + +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&spmi_bus { + pm8998_lsid0: pmic@0 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8998_gpio: gpios@c000 { + compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>, + <0 0xd6 0 IRQ_TYPE_NONE>, + <0 0xd7 0 IRQ_TYPE_NONE>, + <0 0xd8 0 IRQ_TYPE_NONE>, + <0 0xd9 0 IRQ_TYPE_NONE>; + }; + + }; + + pm8998_lsid1: pmic@1 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 979ab49913f1..6d651f314193 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -12,4 +12,49 @@ / { model = "Qualcomm Technologies, Inc. SDM845 MTP"; compatible = "qcom,sdm845-mtp"; + + aliases { + serial0 = &uart9; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb3c995..0c9a2aa6a1b5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -5,7 +5,10 @@ * Copyright (c) 2018, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,gcc-sdm845.h> +#include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> / { interrupt-parent = <&intc>; @@ -13,6 +16,41 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + }; + chosen { }; memory@80000000 { @@ -152,6 +190,11 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, @@ -206,6 +249,457 @@ #power-domain-cells = <1>; }; + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x8c0000 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x888000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x888000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x88c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x88c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x890000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0x890000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x894000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0x894000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x898000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0x898000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0x89c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0x89c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0xac0000 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0xa80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0xa80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0xa88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0xa88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0xa8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0xa8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0xa90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0xa90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0xa94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0xa94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0xa98000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0xa98000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0xa9c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0xa9c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0x1f40000 0x40000>; @@ -219,6 +713,269 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default { + pinmux { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio17", "gpio18"; + function = "qup1"; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + pinmux { + pins = "gpio27", "gpio28"; + function = "qup2"; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + pinmux { + pins = "gpio41", "gpio42"; + function = "qup3"; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + pinmux { + pins = "gpio89", "gpio90"; + function = "qup4"; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + pinmux { + pins = "gpio85", "gpio86"; + function = "qup5"; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + pinmux { + pins = "gpio45", "gpio46"; + function = "qup6"; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + pinmux { + pins = "gpio93", "gpio94"; + function = "qup7"; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + pinmux { + pins = "gpio65", "gpio66"; + function = "qup8"; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + pinmux { + pins = "gpio55", "gpio56"; + function = "qup10"; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + pinmux { + pins = "gpio31", "gpio32"; + function = "qup11"; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + pinmux { + pins = "gpio49", "gpio50"; + function = "qup12"; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + pinmux { + pins = "gpio105", "gpio106"; + function = "qup13"; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + pinmux { + pins = "gpio33", "gpio34"; + function = "qup14"; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + pinmux { + pins = "gpio81", "gpio82"; + function = "qup15"; + }; + }; + + qup_spi0_default: qup-spi0-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup0"; + }; + }; + + qup_spi1_default: qup-spi1-default { + pinmux { + pins = "gpio17", "gpio18", + "gpio19", "gpio20"; + function = "qup1"; + }; + }; + + qup_spi2_default: qup-spi2-default { + pinmux { + pins = "gpio27", "gpio28", + "gpio29", "gpio30"; + function = "qup2"; + }; + }; + + qup_spi3_default: qup-spi3-default { + pinmux { + pins = "gpio41", "gpio42", + "gpio43", "gpio44"; + function = "qup3"; + }; + }; + + qup_spi4_default: qup-spi4-default { + pinmux { + pins = "gpio89", "gpio90", + "gpio91", "gpio92"; + function = "qup4"; + }; + }; + + qup_spi5_default: qup-spi5-default { + pinmux { + pins = "gpio85", "gpio86", + "gpio87", "gpio88"; + function = "qup5"; + }; + }; + + qup_spi6_default: qup-spi6-default { + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + function = "qup6"; + }; + }; + + qup_spi7_default: qup-spi7-default { + pinmux { + pins = "gpio93", "gpio94", + "gpio95", "gpio96"; + function = "qup7"; + }; + }; + + qup_spi8_default: qup-spi8-default { + pinmux { + pins = "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "qup8"; + }; + }; + + qup_spi9_default: qup-spi9-default { + pinmux { + pins = "gpio6", "gpio7", + "gpio4", "gpio5"; + function = "qup9"; + }; + }; + + qup_spi10_default: qup-spi10-default { + pinmux { + pins = "gpio55", "gpio56", + "gpio53", "gpio54"; + function = "qup10"; + }; + }; + + qup_spi11_default: qup-spi11-default { + pinmux { + pins = "gpio31", "gpio32", + "gpio33", "gpio34"; + function = "qup11"; + }; + }; + + qup_spi12_default: qup-spi12-default { + pinmux { + pins = "gpio49", "gpio50", + "gpio51", "gpio52"; + function = "qup12"; + }; + }; + + qup_spi13_default: qup-spi13-default { + pinmux { + pins = "gpio105", "gpio106", + "gpio107", "gpio108"; + function = "qup13"; + }; + }; + + qup_spi14_default: qup-spi14-default { + pinmux { + pins = "gpio33", "gpio34", + "gpio31", "gpio32"; + function = "qup14"; + }; + }; + + qup_spi15_default: qup-spi15-default { + pinmux { + pins = "gpio81", "gpio82", + "gpio83", "gpio84"; + function = "qup15"; + }; + }; + + qup_uart9_default: qup-uart9-default { + pinmux { + pins = "gpio4", "gpio5"; + function = "qup9"; + }; + }; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, /* TM */ + <0xc222000 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc265000 0x1ff>, /* TM */ + <0xc223000 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; }; spmi_bus: spmi@c440000 { @@ -246,6 +1003,29 @@ #mbox-cells = <1>; }; + apps_rsc: rsc@179c0000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x179c0000 0x10000>, + <0x179d0000 0x10000>, + <0x179e0000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sdm845-rpmh-clk"; + #clock-cells = <1>; + }; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts index 009cb1cb0dde..2f24dfc45617 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB Kingfisher board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7795-es1-h3ulcb.dts" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts index dd4f9b6a4254..598b98168559 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index 3f46345a4644..6b5fa91f1d5d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index e19dcd6cb767..7b2fbaec9aef 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7795 ES1.x SoC * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7795.dtsi" @@ -80,7 +77,7 @@ vspd3: vsp@fea38000 { compatible = "renesas,vsp2"; - reg = <0 0xfea38000 0 0x8000>; + reg = <0 0xfea38000 0 0x5000>; interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 620>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts index 4403227c0f97..80791ed27539 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB Kingfisher board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7795-h3ulcb.dts" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index 0afe777973de..df50bf46406e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 0efbef5ea9b7..446822f5751c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0 * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index e231b5a7cbab..8ded64d0a4d5 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0 * * Copyright (C) 2015-2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index d842940b2f43..fb9d08ad7659 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7795 SoC * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7795-cpg-mssr.h> @@ -291,7 +288,7 @@ #size-cells = <2>; ranges; - wdt0: watchdog@e6020000 { + rwdt: watchdog@e6020000 { compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; @@ -528,6 +525,15 @@ status = "disabled"; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + i2c3: i2c@e66d0000 { #address-cells = <1>; #size-cells = <0>; @@ -2530,7 +2536,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2541,7 +2547,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2552,7 +2558,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x8000>; + reg = <0 0xfea30000 0 0x5000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts index de2390f009e7..2df50eb11f16 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the M3ULCB Kingfisher board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7796-m3ulcb.dts" diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts index daee1f1a3f68..cbd8acbf537e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 90cca09b9a5e..052d72acc862 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board with R-Car M3-W * * Copyright (C) 2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts index ddf35d4cd5e5..8860be65342e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W * * Copyright (C) 2015-2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 7c25be6b5af3..cbd35c00b4af 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7796 SoC * - * Copyright (C) 2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2016-2017 Renesas Electronics Corp. */ #include <dt-bindings/clock/r8a7796-cpg-mssr.h> @@ -269,7 +266,7 @@ #size-cells = <2>; ranges; - wdt0: watchdog@e6020000 { + rwdt: watchdog@e6020000 { compatible = "renesas,r8a7796-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; @@ -2108,13 +2105,57 @@ }; pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a7796", + "renesas,pcie-rcar-gen3"; reg = <0 0xfe000000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; }; pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a7796", + "renesas,pcie-rcar-gen3"; reg = <0 0xee800000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; }; imr-lx4@fe860000 { @@ -2212,7 +2253,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2223,7 +2264,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2234,7 +2275,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x8000>; + reg = <0 0xfea30000 0 0x5000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 486aecacb22a..0cd44461a0bd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -138,9 +138,14 @@ #size-cells = <2>; ranges; - wdt0: watchdog@e6020000 { + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77965-wdt", + "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; - /* placeholder */ + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; }; gpio0: gpio@e6050000 { @@ -451,6 +456,94 @@ status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a7796", "renesas,rcar-gen3-usbhs"; @@ -611,6 +704,95 @@ dma-channels = <16>; }; + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77965_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77965_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A77965_PD_A3VP>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77965", "renesas,etheravb-rcar-gen3"; @@ -732,7 +914,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x51>, <&dmac1 0x50>, @@ -749,7 +931,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x53>, <&dmac1 0x52>, @@ -766,7 +948,7 @@ reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -780,7 +962,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; @@ -796,7 +978,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; @@ -812,7 +994,7 @@ reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 202>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, @@ -1176,6 +1358,9 @@ port@0 { reg = <0>; }; + port@1 { + reg = <1>; + }; }; }; @@ -1340,13 +1525,57 @@ }; pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a77965", + "renesas,pcie-rcar-gen3"; reg = <0 0xfe000000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; }; pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a77965", + "renesas,pcie-rcar-gen3"; reg = <0 0xee800000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; }; fcpf0: fcp@fe950000 { @@ -1397,7 +1626,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -1416,7 +1645,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 21f9cf5c6e84..b6d53321576b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Eagle board * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 9fce031a596f..8eac8ca6550b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the V3M Starter Kit board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 98a2317a16c4..954168858fed 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a77970 SoC * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a77970-cpg-mssr.h> @@ -776,7 +773,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 0b93a7d76585..9f25c407dfd7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -59,6 +59,8 @@ phy0: ethernet-phy@0 { rxc-skew-ps = <1500>; reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -80,6 +82,28 @@ clock-frequency = <32768>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander0: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander1: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &mmc0 { pinctrl-0 = <&mmc_pins>; pinctrl-1 = <&mmc_pins_uhs>; @@ -104,6 +128,11 @@ function = "canfd0"; }; + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index c9680994555d..9dac42f8f804 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -15,6 +15,7 @@ aliases { serial0 = &scif0; + ethernet0 = &gether; }; chosen { @@ -36,7 +37,29 @@ clock-frequency = <32768>; }; +&gether { + pinctrl-0 = <&gether_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + }; +}; + &pfc { + gether_pins: gether { + groups = "gether_mdio_a", "gether_rgmii", + "gether_txcrefclk", "gether_txcrefclk_mega"; + function = "gether"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 4c40f9f0ebc9..b8c9a56562f2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -16,6 +16,15 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -30,6 +39,36 @@ enable-method = "psci"; }; + a53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <1>; + clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; + power-domains = <&sysc R8A77980_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <2>; + clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; + power-domains = <&sysc R8A77980_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <3>; + clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; + power-domains = <&sysc R8A77980_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + L2_CA53: cache-controller { compatible = "cache"; power-domains = <&sysc R8A77980_PD_CA53_SCU>; @@ -79,6 +118,96 @@ #size-cells = <2>; ranges; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 22>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 25>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a77980"; reg = <0 0xe6060000 0 0x50c>; @@ -105,6 +234,118 @@ #power-domain-cells = <1>; }; + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77980", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac1 0x9b>, <&dmac1 0x9a>, + <&dmac2 0x9b>, <&dmac2 0x9a>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a77980", "renesas,rcar-gen3-hscif", @@ -202,6 +443,69 @@ }; }; + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: mmu@e7b00000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7b00000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: mmu@e7960000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7960000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77980_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77980", "renesas,etheravb-rcar-gen3"; @@ -387,6 +691,18 @@ dma-channels = <16>; }; + gether: ethernet@e7400000 { + compatible = "renesas,gether-r8a77980"; + reg = <0 0xe7400000 0 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 813>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmc0: mmc@ee140000 { compatible = "renesas,sdhi-r8a77980", "renesas,rcar-gen3-sdhi"; @@ -408,7 +724,7 @@ <0x0 0xf1020000 0 0x20000>, <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; @@ -416,6 +732,83 @@ resets = <&cpg 408>; }; + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a77980", + "renesas,du-r8a77970"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>; + clock-names = "du.0"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 724>; + vsps = <&vspd0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a77980-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = + <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; @@ -424,13 +817,13 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 7a09d0524f9b..2bc3a4884b00 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -47,10 +47,18 @@ }; }; +&ehci0 { + status = "okay"; +}; + &extal_clk { clock-frequency = <48000000>; }; +&ohci0 { + status = "okay"; +}; + &pfc { avb_pins: avb { mux { @@ -58,8 +66,37 @@ function = "avb"; }; }; + + usb0_pins: usb { + groups = "usb0_b"; + function = "usb0"; + }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; }; &scif2 { status = "okay"; }; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index be4f519711a1..ae89260baad9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/renesas-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a77990-sysc.h> / { compatible = "renesas,r8a77990"; @@ -17,16 +18,24 @@ #address-cells = <1>; #size-cells = <0>; - /* 1 core only at this point */ a53_0: cpu@0 { compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0>; + reg = <0>; device_type = "cpu"; power-domains = <&sysc 5>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; + a53_1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <1>; + device_type = "cpu"; + power-domains = <&sysc 6>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + L2_CA53: cache-controller-0 { compatible = "cache"; power-domains = <&sysc 21>; @@ -44,8 +53,9 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a53_0>; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>; }; psci { @@ -60,6 +70,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77990-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc 32>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77990", "renesas,rcar-gen3-gpio"; @@ -191,10 +211,91 @@ #power-domain-cells = <1>; }; + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77990_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77990", "renesas,etheravb-rcar-gen3"; - reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + reg = <0 0xe6800000 0 0x800>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, @@ -248,6 +349,54 @@ status = "disabled"; }; + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a77990", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a77990", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -258,7 +407,7 @@ <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc 32>; @@ -273,9 +422,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 9d73de8bc94d..a8e8f2669d4c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Draak board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; @@ -59,6 +56,27 @@ }; }; + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -82,6 +100,12 @@ regulator-boot-on; regulator-always-on; }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &extal_clk { @@ -142,6 +166,11 @@ groups = "usb0"; function = "usb0"; }; + + vin4_pins_cvbs: vin4 { + groups = "vin4_data8", "vin4_sync", "vin4_clk"; + function = "vin4"; + }; }; &i2c0 { @@ -154,6 +183,77 @@ reg = <0x50>; pagesize = <8>; }; + + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, link it to + * VIN4 here. + */ + adv7180_out: endpoint { + remote-endpoint = <&vin4_in>; + }; + }; + }; + + }; + + hdmi-decoder@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, leave HDMI + * not connected here. + */ + adv7612_out: endpoint { + pclk-sample = <0>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; + }; }; &i2c1 { @@ -167,6 +267,11 @@ pinctrl-names = "default"; status = "okay"; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x12_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + ports { port@0 { endpoint { @@ -246,3 +351,23 @@ timeout-sec = <60>; status = "okay"; }; + +&vin4 { + pinctrl-0 = <&vin4_pins_cvbs>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vin4_in: endpoint { + remote-endpoint = <&adv7180_out>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 2506f46293e8..fe77bc43c447 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a77995 SoC * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a77995-cpg-mssr.h> @@ -88,8 +85,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -104,8 +100,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -120,8 +115,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -136,8 +130,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -152,8 +145,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -168,8 +160,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -184,8 +175,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -224,6 +214,18 @@ #power-domain-cells = <1>; }; + thermal: thermal@e6190000 { + compatible = "renesas,thermal-r8a77995"; + reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77995", "renesas,irqc"; #interrupt-cells = <2>; @@ -240,6 +242,41 @@ resets = <&cpg 407>; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -408,6 +445,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xe6740000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -415,6 +453,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xe7740000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -422,6 +461,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xe6570000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -430,6 +470,7 @@ reg = <0 0xe67b0000 0 0x1000>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -437,6 +478,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xec670000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -444,6 +486,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfd800000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -451,6 +494,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xffc80000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -458,6 +502,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfe6b0000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -465,6 +510,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfebd0000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -472,6 +518,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfe990000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -593,6 +640,40 @@ status = "disabled"; }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a77995", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -610,6 +691,117 @@ status = "disabled"; }; + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x64>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x64>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x64>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x64>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + vin4: video@e6ef4000 { compatible = "renesas,vin-r8a77995"; reg = <0 0xe6ef4000 0 0x1000>; @@ -699,7 +891,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -709,7 +901,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -785,6 +977,25 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 9256fbaaab7f..7d3d866a0063 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for common parts of Salvator-X board variants * * Copyright (C) 2015-2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* @@ -36,7 +33,7 @@ / { aliases { serial0 = &scif2; - serial1 = &scif1; + serial1 = &hscif1; ethernet0 = &avb; }; @@ -341,6 +338,15 @@ clock-frequency = <32768>; }; +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + /* Please only enable hscif1 or scif1 */ + status = "okay"; +}; + &hsusb { dr_mode = "otg"; status = "okay"; @@ -440,7 +446,7 @@ }; }; - port@10 { + port@a { reg = <10>; adv7482_txa: endpoint { @@ -450,7 +456,7 @@ }; }; - port@11 { + port@b { reg = <11>; adv7482_txb: endpoint { @@ -546,6 +552,11 @@ function = "du"; }; + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + i2c2_pins: i2c2 { groups = "i2c2_a"; function = "i2c2"; @@ -589,13 +600,13 @@ }; sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <3300>; }; sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <1800>; }; @@ -711,7 +722,8 @@ pinctrl-names = "default"; uart-has-rtscts; - status = "okay"; + /* Please only enable hscif1 or scif1 */ + /* status = "okay"; */ }; &scif2 { @@ -838,7 +850,7 @@ status = "okay"; }; -&wdt0 { +&rwdt { timeout-sec = <60>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi index 468868c8ed9f..ddee50e64632 100644 --- a/arch/arm64/boot/dts/renesas/salvator-x.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board * * Copyright (C) 2015-2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "salvator-common.dtsi" @@ -20,6 +17,8 @@ }; &i2c4 { + clock-frequency = <400000>; + versaclock5: clock-generator@6a { compatible = "idt,5p49v5923"; reg = <0x6a>; diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi index bf4d200fb546..717d42758cbc 100644 --- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X 2nd version board * * Copyright (C) 2015-2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "salvator-common.dtsi" @@ -20,6 +17,8 @@ }; &i2c4 { + clock-frequency = <400000>; + versaclock6: clock-generator@6a { compatible = "idt,5p49v6901"; reg = <0x6a>; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index a4e715cbde87..8bf3091a899c 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Kingfisher (ULCB extension) board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0edb16e6b372..0ead552d7eae 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the R-Car Gen3 ULCB board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/gpio/gpio.h> @@ -330,13 +327,13 @@ }; sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <3300>; }; sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <1800>; }; @@ -447,7 +444,7 @@ status = "okay"; }; -&wdt0 { +&rwdt { timeout-sec = <60>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 48a83f882947..b0092d95b574 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -9,7 +9,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index 3d551e3e6c23..8302d86d35c4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 28257724a56e..5272e887a434 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 PINE64 - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index b8e9da15e00c..3f5a2944300f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rk3328-cru.h> @@ -89,6 +52,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -100,6 +64,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -111,6 +76,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -331,7 +297,7 @@ reg = <0x0 0xff120000 0x0 0x100>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "sclk_uart", "pclk_uart"; + clock-names = "baudclk", "apb_pclk"; dmas = <&dmac 4>, <&dmac 5>; dma-names = "tx", "rx"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts index 8a5275f0539b..160f2c7e9559 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index a37220a9387c..4de089149c50 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index 5e4d3a7015f5..6b9b1ac1994c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index d3f6c8e0d206..96147d93dd1d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 13a9e22f5d2d..fc1bf078a41f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index b3510d56517a..7452bedf1a7e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index ad91ced78649..9c24de1ba43c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rk3368-cru.h> @@ -113,7 +76,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ }; @@ -122,6 +84,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_l2: cpu@2 { @@ -129,6 +92,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_l3: cpu@3 { @@ -136,6 +100,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_b0: cpu@100 { @@ -143,7 +108,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ }; @@ -152,6 +116,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_b2: cpu@102 { @@ -159,6 +124,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_b3: cpu@103 { @@ -166,6 +132,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 56533c344ef2..959ddc3c7df5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts new file mode 100644 index 000000000000..8978d924eb83 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts @@ -0,0 +1,599 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd. + * + * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw + */ + +/dts-v1/; +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "96boards RK3399 Ficus"; + compatible = "vamrs,ficus", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc1v8_s0: vcc1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_drv>; + regulator-boot-on; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 0>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc3v3_sys>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + status = "okay"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v0_sd: LDO_REG5 { + regulator-name = "vcc3v0_sd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ + audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ + sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ + gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */ + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + gmac { + rgmii_sleep_pins: rgmii-sleep-pins { + rockchip,pins = + <3 15 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + sdmmc { + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + }; + + pcie { + pcie_drv: pcie-drv { + rockchip,pins = + <1 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = + <1 17 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = + <1 14 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = + <4 27 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + clock-frequency = <100000000>; + clock-freq-min-max = <100000 100000000>; + disable-wp; + sd-uhs-sdr104; + vqmmc-supply = <&vcc_sd>; + card-detect-delay = <800>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "host"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 2a352763c848..38336ab57cc4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -1,46 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -109,6 +73,39 @@ regulator-max-microvolt = <12000000>; }; + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + }; + }; + rt5640-sound { compatible = "simple-audio-card"; simple-audio-card,name = "rockchip,rt5640-codec"; @@ -529,19 +526,16 @@ &i2s0 { rockchip,playback-channels = <8>; rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s1 { rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s2 { - #sound-dai-cells = <0>; status = "okay"; }; @@ -627,6 +621,16 @@ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts new file mode 100644 index 000000000000..1ee0dc0d9f10 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Bob Rev 4+ board device tree source + * + * Copyright 2018 Google, Inc + */ + +/dts-v1/; +#include "rk3399-gru-chromebook.dtsi" + +/ { + model = "Google Bob"; + compatible = "google,bob-rev13", "google,bob-rev12", + "google,bob-rev11", "google,bob-rev10", + "google,bob-rev9", "google,bob-rev8", + "google,bob-rev7", "google,bob-rev6", + "google,bob-rev5", "google,bob-rev4", + "google,bob", "google,gru", "rockchip,rk3399"; + + edp_panel: edp-panel { + compatible = "boe,nv101wxmn51", "simple-panel"; + backlight = <&backlight>; + power-supply = <&pp3300_disp>; + + ports { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; +}; + +&ap_i2c_ts { + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio3>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int_l &touch_reset_l>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; +}; + +&ap_i2c_tp { + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int_l>; + wakeup-source; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&cpu_alert0 { + temperature = <65000>; +}; + +&cpu_alert1 { + temperature = <70000>; +}; + +&spi0 { + status = "okay"; +}; + +&pinctrl { + tpm { + h1_int_od_l: h1-int-od-l { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi new file mode 100644 index 000000000000..ff81dfda3b95 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Chromebook shared properties + * + * Copyright 2018 Google, Inc + */ + +#include "rk3399-gru.dtsi" + +/ { + pp900_ap: pp900-ap { + compatible = "regulator-fixed"; + regulator-name = "pp900_ap"; + + /* EC turns on w/ pp900_ap_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + /* EC turns on w/ pp900_usb_en */ + pp900_usb: pp900-ap { + }; + + /* EC turns on w/ pp900_pcie_en */ + pp900_pcie: pp900-ap { + }; + + pp3000: pp3000 { + compatible = "regulator-fixed"; + regulator-name = "pp3000"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3000_en>; + + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&ppvar_sys>; + }; + + ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { + compatible = "pwm-regulator"; + regulator-name = "ppvar_centerlogic_pwm"; + + pwms = <&pwm3 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + }; + + ppvar_centerlogic: ppvar-centerlogic { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_centerlogic"; + + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + + ctrl-supply = <&ppvar_centerlogic_pwm>; + ctrl-voltage-range = <799434 1049925>; + + regulator-settling-time-up-us = <378>; + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; + }; + + /* Schematics call this PPVAR even though it's fixed */ + ppvar_logic: ppvar-logic { + compatible = "regulator-fixed"; + regulator-name = "ppvar_logic"; + + /* EC turns on w/ ppvar_logic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1800_audio: pp1800-audio { + compatible = "regulator-fixed"; + regulator-name = "pp1800_audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_audio_en>; + + enable-active-high; + gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp1800>; + }; + + /* gpio is shared with pp3300_wifi_bt */ + pp1800_pcie: pp1800-pcie { + compatible = "regulator-fixed"; + regulator-name = "pp1800_pcie"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_pd_l>; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + /* + * Need to wait 1ms + ramp-up time before we can power on WiFi. + * This has been approximated as 8ms total. + */ + regulator-enable-ramp-delay = <8000>; + + vin-supply = <&pp1800>; + }; + + /* Always on; plain and simple */ + pp3000_ap: pp3000_emmc: pp3000 { + }; + + pp1500_ap_io: pp1500-ap-io { + compatible = "regulator-fixed"; + regulator-name = "pp1500_ap_io"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1500_en>; + + enable-active-high; + gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&pp1800>; + }; + + pp3300_disp: pp3300-disp { + compatible = "regulator-fixed"; + regulator-name = "pp3300_disp"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_disp_en>; + + enable-active-high; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <2000>; + vin-supply = <&pp3300>; + }; + + /* EC turns on w/ pp3300_usb_en_l */ + pp3300_usb: pp3300 { + }; + + /* gpio is shared with pp1800_pcie and pinctrl is set there */ + pp3300_wifi_bt: pp3300-wifi-bt { + compatible = "regulator-fixed"; + regulator-name = "pp3300_wifi_bt"; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp3300>; + }; + + /* + * This is a bit of a hack. The WiFi module should be reset at least + * 1ms after its regulators have ramped up (max rampup time is ~7ms). + * With some stretching of the imagination, we can call the 1.8V + * regulator a supply. + */ + wlan_pd_n: wlan-pd-n { + compatible = "regulator-fixed"; + regulator-name = "wlan_pd_n"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_reset_l>; + + enable-active-high; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp1800_pcie>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + 17 18 19 20 21 22 23 24 25 26 27 28 29 30 + 31 32 33 34 35 36 37 38 39 40 41 42 43 44 + 45 46 47 48 49 50 51 52 53 54 55 56 57 58 + 59 60 61 62 63 64 65 66 67 68 69 70 71 72 + 73 74 75 76 77 78 79 80 81 82 83 84 85 86 + 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; + default-brightness-level = <51>; + enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + power-supply = <&pp3300_disp>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwm-delay-us = <10000>; + }; +}; + +&ppvar_bigcpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&ppvar_litcpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&ppvar_gpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&cdn_dp { + extcon = <&usbc_extcon0>, <&usbc_extcon1>; +}; + +&edp { + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +ap_i2c_mic: &i2c1 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + headsetcodec: rt5514@57 { + compatible = "realtek,rt5514"; + reg = <0x57>; + realtek,dmic-init-delay-ms = <20>; + }; +}; + +ap_i2c_tp: &i2c5 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + /* + * Note strange pullup enable. Apparently this avoids leakage but + * still allows us to get nice 4.7K pullups for high speed i2c + * transfers. Basically we want the pullup on whenever the ap is + * alive, so the "en" pin just gets set to output high. + */ + pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; +}; + +&cros_ec { + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + usbc_extcon1: extcon@1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + + #extcon-cells = <0>; + }; +}; + +&sound { + rockchip,codec = <&max98357a &headsetcodec + &codec &wacky_spi_audio &cdn_dp>; +}; + +&spi2 { + wacky_spi_audio: spi2@0 { + compatible = "realtek,rt5514"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mic_int>; + /* May run faster once verified. */ + spi-max-frequency = <10000000>; + wakeup-source; + }; +}; + +&pci_rootport { + mvl_wifi: wifi@0,0 { + compatible = "pci1b4b,2b42"; + reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 + 0x83010000 0x0 0x00100000 0x0 0x00100000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_host_wake_l>; + wakeup-source; + }; +}; + +&tcphy1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + +&u2phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&pinctrl { + discrete-regulators { + pp1500_en: pp1500-en { + rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + pp1800_audio_en: pp1800-audio-en { + rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO + &pcfg_pull_down>; + }; + + pp3000_en: pp3000-en { + rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + pp3300_disp_en: pp3300-disp-en { + rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + wlan_module_pd_l: wlan-module-pd-l { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO + &pcfg_pull_down>; + }; + }; +}; + +&wifi { + wifi_perst_l: wifi-perst-l { + rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_host_wake_l: wlan-host-wake-l { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 82179125bfb7..2cc7c47d6a85 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -1,49 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Gru-Kevin Rev 6+ board device tree source * * Copyright 2016-2017 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "rk3399-gru.dtsi" +#include "rk3399-gru-chromebook.dtsi" #include <dt-bindings/input/linux-event-codes.h> /* @@ -75,24 +38,6 @@ vin-supply = <&pp3300>; }; - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&cros_ec_pwm 1>; - brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 17 18 19 20 21 22 23 24 25 26 27 28 29 30 - 31 32 33 34 35 36 37 38 39 40 41 42 43 44 - 45 46 47 48 49 50 51 52 53 54 55 56 57 58 - 59 60 61 62 63 64 65 66 67 68 69 70 71 72 - 73 74 75 76 77 78 79 80 81 82 83 84 85 86 - 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; - default-brightness-level = <51>; - enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - power-supply = <&pp3300_disp>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en>; - pwm-delay-us = <10000>; - }; - edp_panel: edp-panel { compatible = "sharp,lq123p1jx31", "simple-panel"; backlight = <&backlight>; @@ -124,6 +69,10 @@ }; }; +&backlight { + pwms = <&cros_ec_pwm 1>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>; @@ -280,23 +229,6 @@ ap_i2c_dig: &i2c2 { }; }; -&edp { - status = "okay"; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - &ppvar_bigcpu_pwm { regulator-min-microvolt = <798674>; regulator-max-microvolt = <1302172>; @@ -374,10 +306,4 @@ ap_i2c_dig: &i2c2 { rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - - wifi { - wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index f49bfab75dd0..ca07f6032200 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Gru (and derivatives) board device tree source * * Copyright 2016-2017 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> @@ -82,19 +45,6 @@ regulator-boot-on; }; - pp900_ap: pp900-ap { - compatible = "regulator-fixed"; - regulator-name = "pp900_ap"; - - /* EC turns on w/ pp900_ap_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - vin-supply = <&ppvar_sys>; - }; - pp1200_lpddr: pp1200-lpddr { compatible = "regulator-fixed"; regulator-name = "pp1200_lpddr"; @@ -121,23 +71,6 @@ vin-supply = <&ppvar_sys>; }; - pp3000: pp3000 { - compatible = "regulator-fixed"; - regulator-name = "pp3000"; - pinctrl-names = "default"; - pinctrl-0 = <&pp3000_en>; - - enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - vin-supply = <&ppvar_sys>; - }; - pp3300: pp3300 { compatible = "regulator-fixed"; regulator-name = "pp3300"; @@ -191,8 +124,6 @@ ctrl-voltage-range = <800107 1302232>; regulator-settling-time-up-us = <322>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; }; ppvar_litcpu_pwm: ppvar-litcpu-pwm { @@ -222,8 +153,6 @@ ctrl-voltage-range = <797743 1307837>; regulator-settling-time-up-us = <384>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; }; ppvar_gpu_pwm: ppvar-gpu-pwm { @@ -253,63 +182,12 @@ ctrl-voltage-range = <786384 1217747>; regulator-settling-time-up-us = <390>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; - }; - - ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { - compatible = "pwm-regulator"; - regulator-name = "ppvar_centerlogic_pwm"; - - pwms = <&pwm3 0 3337 0>; - pwm-supply = <&ppvar_sys>; - pwm-dutycycle-range = <100 0>; - pwm-dutycycle-unit = <100>; - - /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <799434>; - regulator-max-microvolt = <1049925>; - }; - - ppvar_centerlogic: ppvar-centerlogic { - compatible = "vctrl-regulator"; - regulator-name = "ppvar_centerlogic"; - - regulator-min-microvolt = <799434>; - regulator-max-microvolt = <1049925>; - - ctrl-supply = <&ppvar_centerlogic_pwm>; - ctrl-voltage-range = <799434 1049925>; - - regulator-settling-time-up-us = <378>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; - }; - - /* Schematics call this PPVAR even though it's fixed */ - ppvar_logic: ppvar-logic { - compatible = "regulator-fixed"; - regulator-name = "ppvar_logic"; - - /* EC turns on w/ ppvar_logic_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - vin-supply = <&ppvar_sys>; }; /* EC turns on w/ pp900_ddrpll_en */ pp900_ddrpll: pp900-ap { }; - /* EC turns on w/ pp900_pcie_en */ - pp900_pcie: pp900-ap { - }; - /* EC turns on w/ pp900_pll_en */ pp900_pll: pp900-ap { }; @@ -318,10 +196,6 @@ pp900_pmu: pp900-ap { }; - /* EC turns on w/ pp900_usb_en */ - pp900_usb: pp900-ap { - }; - /* EC turns on w/ pp1800_s0_en_l */ pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 { }; @@ -346,79 +220,6 @@ pp1800_usb: pp1800 { }; - pp1500_ap_io: pp1500-ap-io { - compatible = "regulator-fixed"; - regulator-name = "pp1500_ap_io"; - pinctrl-names = "default"; - pinctrl-0 = <&pp1500_en>; - - enable-active-high; - gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - vin-supply = <&pp1800>; - }; - - pp1800_audio: pp1800-audio { - compatible = "regulator-fixed"; - regulator-name = "pp1800_audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pp1800_audio_en>; - - enable-active-high; - gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - - vin-supply = <&pp1800>; - }; - - /* gpio is shared with pp3300_wifi_bt */ - pp1800_pcie: pp1800-pcie { - compatible = "regulator-fixed"; - regulator-name = "pp1800_pcie"; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_module_pd_l>; - - enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - - /* - * Need to wait 1ms + ramp-up time before we can power on WiFi. - * This has been approximated as 8ms total. - */ - regulator-enable-ramp-delay = <8000>; - - vin-supply = <&pp1800>; - }; - - /* - * This is a bit of a hack. The WiFi module should be reset at least - * 1ms after its regulators have ramped up (max rampup time is ~7ms). - * With some stretching of the imagination, we can call the 1.8V - * regulator a supply. - */ - wlan_pd_n: wlan-pd-n { - compatible = "regulator-fixed"; - regulator-name = "wlan_pd_n"; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_module_reset_l>; - - enable-active-high; - gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; - - vin-supply = <&pp1800_pcie>; - }; - - /* Always on; plain and simple */ - pp3000_ap: pp3000_emmc: pp3000 { - }; - pp3000_sd_slot: pp3000-sd-slot { compatible = "regulator-fixed"; regulator-name = "pp3000_sd_slot"; @@ -457,34 +258,6 @@ pp3300_trackpad: pp3300-trackpad { }; - /* EC turns on w/ pp3300_usb_en_l */ - pp3300_usb: pp3300 { - }; - - pp3300_disp: pp3300-disp { - compatible = "regulator-fixed"; - regulator-name = "pp3300_disp"; - pinctrl-names = "default"; - pinctrl-0 = <&pp3300_disp_en>; - - enable-active-high; - gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; - - startup-delay-us = <2000>; - vin-supply = <&pp3300>; - }; - - /* gpio is shared with pp1800_pcie and pinctrl is set there */ - pp3300_wifi_bt: pp3300-wifi-bt { - compatible = "regulator-fixed"; - regulator-name = "pp3300_wifi_bt"; - - enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - - vin-supply = <&pp3300>; - }; - /* EC turns on w/ usb_a_en */ pp5000_usb_a_vbus: pp5000 { }; @@ -494,7 +267,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>; - wake-on-bt { + wake_on_bt: wake-on-bt { label = "Wake-on-Bluetooth"; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; @@ -512,17 +285,14 @@ status = "okay"; }; - sound { + sound: sound { compatible = "rockchip,rk3399-gru-sound"; rockchip,cpu = <&i2s0 &i2s2>; - rockchip,codec = <&max98357a &headsetcodec - &codec &wacky_spi_audio &cdn_dp>; }; }; &cdn_dp { status = "okay"; - extcon = <&usbc_extcon0>, <&usbc_extcon1>; }; /* @@ -613,22 +383,6 @@ status = "okay"; }; -ap_i2c_mic: &i2c1 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - headsetcodec: rt5514@57 { - compatible = "realtek,rt5514"; - reg = <0x57>; - realtek,dmic-init-delay-ms = <20>; - }; -}; - ap_i2c_ts: &i2c3 { status = "okay"; @@ -639,24 +393,6 @@ ap_i2c_ts: &i2c3 { i2c-scl-rising-time-ns = <300>; }; -ap_i2c_tp: &i2c5 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - /* - * Note strange pullup enable. Apparently this avoids leakage but - * still allows us to get nice 4.7K pullups for high speed i2c - * transfers. Basically we want the pullup on whenever the ap is - * alive, so the "en" pin just gets set to output high. - */ - pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; -}; - ap_i2c_audio: &i2c8 { status = "okay"; @@ -730,17 +466,6 @@ ap_i2c_audio: &i2c8 { #address-cells = <3>; #size-cells = <2>; ranges; - - mvl_wifi: wifi@0,0 { - compatible = "pci1b4b,2b42"; - reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 - 0x83010000 0x0 0x00100000 0x0 0x00100000>; - interrupt-parent = <&gpio0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_host_wake_l>; - wakeup-source; - }; }; }; @@ -830,18 +555,6 @@ ap_i2c_audio: &i2c8 { &spi2 { status = "okay"; - - wacky_spi_audio: spi2@0 { - compatible = "realtek,rt5514"; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&mic_int>; - /* May run faster once verified. */ - spi-max-frequency = <10000000>; - wakeup-source; - }; }; &spi5 { @@ -863,24 +576,12 @@ ap_i2c_audio: &i2c8 { #size-cells = <0>; }; - cros_ec_pwm: ec-pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - usbc_extcon0: extcon@0 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <0>; #extcon-cells = <0>; }; - - usbc_extcon1: extcon@1 { - compatible = "google,extcon-usbc-cros-ec"; - google,usb-port-id = <1>; - - #extcon-cells = <0>; - }; }; }; @@ -896,19 +597,10 @@ ap_i2c_audio: &i2c8 { extcon = <&usbc_extcon0>; }; -&tcphy1 { - status = "okay"; - extcon = <&usbc_extcon1>; -}; - &u2phy0 { status = "okay"; }; -&u2phy1 { - status = "okay"; -}; - &u2phy0_host { status = "okay"; }; @@ -929,22 +621,10 @@ ap_i2c_audio: &i2c8 { status = "okay"; }; -&usb_host0_ehci { - status = "okay"; -}; - &usb_host0_ohci { status = "okay"; }; -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - &usbdrd3_0 { status = "okay"; extcon = <&usbc_extcon0>; @@ -955,16 +635,6 @@ ap_i2c_audio: &i2c8 { dr_mode = "host"; }; -&usbdrd3_1 { - status = "okay"; - extcon = <&usbc_extcon1>; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - &vopb { status = "okay"; }; @@ -1023,26 +693,6 @@ ap_i2c_audio: &i2c8 { }; discrete-regulators { - pp1500_en: pp1500-en { - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - pp1800_audio_en: pp1800-audio-en { - rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO - &pcfg_pull_down>; - }; - - pp3300_disp_en: pp3300-disp-en { - rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - pp3000_en: pp3000-en { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - sd_io_pwr_en: sd-io-pwr-en { rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -1057,11 +707,6 @@ ap_i2c_audio: &i2c8 { rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO &pcfg_pull_none>; }; - - wlan_module_pd_l: wlan-module-pd-l { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO - &pcfg_pull_down>; - }; }; codec { @@ -1168,11 +813,7 @@ ap_i2c_audio: &i2c8 { }; }; - wifi { - wifi_perst_l: wifi-perst-l { - rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; - }; - + wifi: wifi { wlan_module_reset_l: wlan-module-reset-l { rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi index d8a120f945c8..69cc9b05baa5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index 81617bcf2522..d6f1095abb04 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index e0afdd8b62bd..e0d64f862322 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 14a0f1998639..0130b9f98c9d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/pwm/pwm.h> @@ -439,7 +402,6 @@ pinctrl-0 = <&i2s0_2ch_bus>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index ad7548d3b93d..fef2c0608999 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -186,7 +149,6 @@ &i2s0 { rockchip,playback-channels = <8>; rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; status = "okay"; }; @@ -235,6 +197,5 @@ &spdif { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 941b627094d7..36b60791c156 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "dt-bindings/pwm/pwm.h" @@ -227,6 +190,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -458,7 +425,6 @@ }; &i2s2 { - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index e0040b648f43..c88e603396f6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rk3399-cru.h> @@ -108,8 +71,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -119,6 +82,7 @@ reg = <0x0 0x1>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -128,6 +92,7 @@ reg = <0x0 0x2>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -137,6 +102,7 @@ reg = <0x0 0x3>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -145,8 +111,8 @@ compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; }; @@ -156,6 +122,7 @@ reg = <0x0 0x101>; enable-method = "psci"; clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; }; }; @@ -1446,10 +1413,6 @@ <&cru SRST_P_UPHY0_TCPHY>; reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; rockchip,grf = <&grf>; - rockchip,typec-conn-dir = <0xe580 0 16>; - rockchip,usb3tousb2-en = <0xe580 3 19>; - rockchip,external-psm = <0xe588 14 30>; - rockchip,pipe-status = <0xe5c0 0 0>; status = "disabled"; tcphy0_dp: dp-port { @@ -1475,10 +1438,6 @@ <&cru SRST_P_UPHY1_TCPHY>; reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; rockchip,grf = <&grf>; - rockchip,typec-conn-dir = <0xe58c 0 16>; - rockchip,usb3tousb2-en = <0xe58c 3 19>; - rockchip,external-psm = <0xe594 14 30>; - rockchip,pipe-status = <0xe5c0 16 16>; status = "disabled"; tcphy1_dp: dp-port { @@ -1516,6 +1475,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spdif_bus>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1531,6 +1491,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2s0_8ch_bus>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1545,6 +1506,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2s1_2ch_bus>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1557,6 +1519,7 @@ clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1698,6 +1661,21 @@ status = "disabled"; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "hdmi-sound"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s2>; + }; + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + hdmi: hdmi@ff940000 { compatible = "rockchip,rk3399-dw-hdmi"; reg = <0x0 0xff940000 0x0 0x20000>; @@ -1711,6 +1689,7 @@ power-domains = <&power RK3399_PD_HDCP>; reg-io-width = <4>; rockchip,grf = <&grf>; + #sound-dai-cells = <0>; status = "disabled"; ports { @@ -1936,19 +1915,49 @@ drive-strength = <12>; }; + pcfg_pull_none_13ma: pcfg-pull-none-13ma { + bias-disable; + drive-strength = <13>; + }; + + pcfg_pull_none_18ma: pcfg-pull-none-18ma { + bias-disable; + drive-strength = <18>; + }; + + pcfg_pull_none_20ma: pcfg-pull-none-20ma { + bias-disable; + drive-strength = <20>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + pcfg_pull_up_8ma: pcfg-pull-up-8ma { bias-pull-up; drive-strength = <8>; }; + pcfg_pull_up_18ma: pcfg-pull-up-18ma { + bias-pull-up; + drive-strength = <18>; + }; + + pcfg_pull_up_20ma: pcfg-pull-up-20ma { + bias-pull-up; + drive-strength = <20>; + }; + pcfg_pull_down_4ma: pcfg-pull-down-4ma { bias-pull-down; drive-strength = <4>; }; - pcfg_pull_up_2ma: pcfg-pull-up-2ma { - bias-pull-up; - drive-strength = <2>; + pcfg_pull_down_8ma: pcfg-pull-down-8ma { + bias-pull-down; + drive-strength = <8>; }; pcfg_pull_down_12ma: pcfg-pull-down-12ma { @@ -1956,9 +1965,22 @@ drive-strength = <12>; }; - pcfg_pull_none_13ma: pcfg-pull-none-13ma { - bias-disable; - drive-strength = <13>; + pcfg_pull_down_18ma: pcfg-pull-down-18ma { + bias-pull-down; + drive-strength = <18>; + }; + + pcfg_pull_down_20ma: pcfg-pull-down-20ma { + bias-pull-down; + drive-strength = <20>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; }; clock { @@ -2481,45 +2503,60 @@ pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = - <4 18 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <4 RK_PC2 RK_FUNC_1 &pcfg_pull_down>; }; vop0_pwm_pin: vop0-pwm-pin { rockchip,pins = - <4 18 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + }; + + vop1_pwm_pin: vop1-pwm-pin { + rockchip,pins = + <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { rockchip,pins = - <4 22 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; }; - vop1_pwm_pin: vop1-pwm-pin { + pwm1_pin_pull_down: pwm1-pin-pull-down { rockchip,pins = - <4 18 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC6 RK_FUNC_1 &pcfg_pull_down>; }; }; pwm2 { pwm2_pin: pwm2-pin { rockchip,pins = - <1 19 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>; }; }; pwm3a { pwm3a_pin: pwm3a-pin { rockchip,pins = - <0 6 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; }; }; pwm3b { pwm3b_pin: pwm3b-pin { rockchip,pins = - <1 14 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index ae3b5adf32df..7968d524351b 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -60,6 +60,7 @@ &i2s_port4 &spdif_port0 &comp_spdif_port0>; + hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>; }; spdif-out { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index 7919233c9ce2..1a5e7c24b901 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -60,6 +60,7 @@ &i2s_port4 &spdif_port0 &comp_spdif_port0>; + hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>; }; spdif-out { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 0298bd0d0e1a..caf112629caa 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -58,6 +58,7 @@ clocks = <&sys_clk 32>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu2: cpu@100 { @@ -77,6 +78,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi index 98d3b4fdb9ad..82bd642d770b 100644 --- a/arch/arm64/boot/dts/sprd/sc2731.dtsi +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi @@ -17,6 +17,28 @@ #address-cells = <1>; #size-cells = <0>; + led-controller@200 { + compatible = "sprd,sc27xx-bltc", "sprd,sc2731-bltc"; + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + label = "red"; + reg = <0x0>; + }; + + led@1 { + label = "green"; + reg = <0x1>; + }; + + led@2 { + label = "blue"; + reg = <0x2>; + }; + }; + rtc@280 { compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc"; reg = <0x280>; @@ -35,6 +57,28 @@ #interrupt-cells = <2>; }; + efuse@380 { + compatible = "sprd,sc27xx-efuse", "sprd,sc2731-efuse"; + reg = <0x380>; + #address-cells = <1>; + #size-cells = <1>; + hwlocks = <&hwlock 12>; + }; + + pmic_adc: adc@480 { + compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc"; + reg = <0x480>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + hwlocks = <&hwlock 4>; + }; + + vibrator@ec8 { + compatible = "sprd,sc27xx-vibrator", "sprd,sc2731-vibrator"; + reg = <0xec8>; + }; + regulators { compatible = "sprd,sc27xx-regulator"; diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index 3f5160d2f130..48f5928ed45c 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -114,7 +114,7 @@ }; idle-states{ - entry-method = "arm,psci"; + entry-method = "psci"; CORE_PD: core_pd { compatible = "arm,idle-state"; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index e9db9108f3c0..eb6be5675f79 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -146,6 +146,12 @@ clocks = <&ext_32k>; }; + timer@40050020 { + compatible = "sprd,sc9860-suspend-timer"; + reg = <0 0x40050020 0 0x20>; + clocks = <&ext_32k>; + }; + hwlock: hwspinlock@40500000 { compatible = "sprd,hwspinlock-r3p0"; reg = <0 0x40500000 0 0x1000>; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile new file mode 100644 index 000000000000..63e619d0b5b8 --- /dev/null +++ b/arch/arm64/boot/dts/ti/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Make file to build device tree binaries for boards based on +# Texas Instruments Inc processors +# +# Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ +# + +dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi new file mode 100644 index 000000000000..2409344df4fa --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family Main Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_main { + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x01800000 0x10000>, /* GICD */ + <0x01880000 0x90000>; /* GICR */ + /* + * vcpumntirq: + * virtual CPU interface maintenance interrupt + */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: gic-its@18200000 { + compatible = "arm,gic-v3-its"; + reg = <0x01820000 0x10000>; + msi-controller; + #msi-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi new file mode 100644 index 000000000000..cede1fa0983c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Texas Instruments K3 AM654 SoC"; + compatible = "ti,am654"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a53_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + /* Recommendation from GIC500 TRM Table A.3 */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: interconnect@100000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */ + <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */ + <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */ + <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */ + <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */ + /* MCUSS Range */ + <0x28380000 0x00 0x28380000 0x03880000>, + <0x40200000 0x00 0x40200000 0x00900100>, + <0x42040000 0x00 0x42040000 0x03ac2400>, + <0x45100000 0x00 0x45100000 0x00c24000>, + <0x46000000 0x00 0x46000000 0x00200000>, + <0x47000000 0x00 0x47000000 0x00068400>; + + cbass_mcu: interconnect@28380000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/ + <0x40200000 0x40200000 0x00900100>, /* First peripheral window */ + <0x42040000 0x42040000 0x03ac2400>, /* WKUP */ + <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x46000000 0x46000000 0x00200000>, /* CPSW */ + <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */ + + cbass_wakeup: interconnect@42040000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + /* WKUP Basic peripherals */ + ranges = <0x42040000 0x42040000 0x03ac2400>; + }; + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-am65-main.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts new file mode 100644 index 000000000000..af6956fdc13f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am654.dtsi" + +/ { + compatible = "ti,am654-evm", "ti,am654"; + model = "Texas Instruments AM654 Base Board"; + + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "earlycon=ns16550a,mmio32,0x02800000"; + }; + + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + secure_ddr: secure_ddr@9e800000 { + reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi new file mode 100644 index 000000000000..2affa6f6617e --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC family in Quad core configuration + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "k3-am65.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1: cluster1 { + core0 { + cpu = <&cpu2>; + }; + + core1 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu2: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_1>; + }; + + cpu3: cpu@101 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_1>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&msmc_l3>; + }; + + L2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index c2a0c00272e2..60f5443f3ef4 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += avnet-ultra96-rev1.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts new file mode 100644 index 000000000000..88aa06fa78a8 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Avnet Ultra96 rev1 + * + * (C) Copyright 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp-zcu100-revC.dts" + +/ { + model = "Avnet Ultra96 Rev1"; + compatible = "avnet,ultra96-rev1", "avnet,ultra96", + "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", + "xlnx,zynqmp"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi deleted file mode 100644 index 9f5eedbc2139..000000000000 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * clock specification for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2015, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/ { - misc_clk: misc_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - i2c_clk: i2c_clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <111111111>; - }; - - sata_clk: sata_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - - clk100: clk100 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - clk600: clk600 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - }; -}; - -&can0 { - clocks = <&misc_clk &misc_clk>; -}; - -&can1 { - clocks = <&misc_clk &misc_clk>; -}; - -&fpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&gem0 { - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; -}; - -&gpio { - clocks = <&misc_clk>; -}; - -&i2c0 { - clocks = <&i2c_clk>; -}; - -&i2c1 { - clocks = <&i2c_clk>; -}; - -&sata { - clocks = <&sata_clk>; -}; - -&sdhci0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&sdhci1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&spi0 { - clocks = <&misc_clk &misc_clk>; -}; - -&spi1 { - clocks = <&misc_clk &misc_clk>; -}; - -&uart0 { - clocks = <&misc_clk &misc_clk>; -}; - -&usb0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&usb1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&watchdog0 { - clocks= <&misc_clk>; -}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts deleted file mode 100644 index 4b0684911626..000000000000 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ /dev/null @@ -1,154 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * dts file for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2014 - 2015, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/dts-v1/; - -#include "zynqmp.dtsi" -#include "zynqmp-ep108-clk.dtsi" - -/ { - model = "ZynqMP EP108"; - - aliases { - mmc0 = &sdhci0; - mmc1 = &sdhci1; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; -}; - -&can0 { - status = "okay"; -}; - -&can1 { - status = "okay"; -}; - -&gem0 { - status = "okay"; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - phy0: phy@0 { - reg = <0>; - max-speed = <100>; - }; -}; - -&gpio { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; - }; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <400000>; - eeprom@55 { - compatible = "atmel,24c64"; - reg = <0x55>; - }; -}; - -&sata { - status = "okay"; - ceva,broken-gen2; - /* SATA Phy OOB timing settings */ - ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; - ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; -}; - -&sdhci1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - num-cs = <1>; - spi0_flash0: spi0_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi0_flash0@0 { - label = "spi0_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&spi1 { - status = "okay"; - num-cs = <1>; - spi1_flash0: spi1_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi1_flash0@0 { - label = "spi1_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "peripheral"; - maximum-speed = "high-speed"; -}; - -&usb1 { - status = "okay"; - dr_mode = "host"; - maximum-speed = "high-speed"; -}; - -&watchdog0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index 3e862a9faf26..eb5e8bddb610 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -44,8 +44,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw4 { label = "sw4"; @@ -89,12 +87,6 @@ gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - - bt_power { - label = "bt_power"; - gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; }; wmmcsdio_fixed: fixedregulator-mmcsdio { @@ -267,6 +259,10 @@ &uart0 { status = "okay"; + bluetooth { + compatible = "ti,wl1831-st"; + enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; }; &uart1 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 5b4ffe646a9b..25dd57485323 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -41,8 +41,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw19 { label = "sw19"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 668f7f26716a..259f21b0c001 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -41,8 +41,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw19 { label = "sw19"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 9a9dd6a0142b..a61b3cc6f4c9 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -41,8 +41,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw19 { label = "sw19"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index a091e6f03014..29ce23422acf 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -58,7 +58,7 @@ }; idle-states { - entry-method = "arm,psci"; + entry-method = "psci"; CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; |
