summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-tcc/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-tcc/include')
-rw-r--r--arch/arm/plat-tcc/include/mach/clock.h48
-rw-r--r--arch/arm/plat-tcc/include/mach/debug-macro.S32
-rw-r--r--arch/arm/plat-tcc/include/mach/entry-macro.S68
-rw-r--r--arch/arm/plat-tcc/include/mach/hardware.h43
-rw-r--r--arch/arm/plat-tcc/include/mach/io.h23
-rw-r--r--arch/arm/plat-tcc/include/mach/irqs.h83
-rw-r--r--arch/arm/plat-tcc/include/mach/system.h31
-rw-r--r--arch/arm/plat-tcc/include/mach/tcc8k-regs.h807
-rw-r--r--arch/arm/plat-tcc/include/mach/timex.h5
-rw-r--r--arch/arm/plat-tcc/include/mach/uncompress.h34
-rw-r--r--arch/arm/plat-tcc/include/mach/vmalloc.h10
11 files changed, 0 insertions, 1184 deletions
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
deleted file mode 100644
index a12f58ad71a8..000000000000
--- a/arch/arm/plat-tcc/include/mach/clock.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Low level clock header file for Telechips TCC architecture
- * (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the GPL v2.
- */
-
-#ifndef __ASM_ARCH_TCC_CLOCK_H__
-#define __ASM_ARCH_TCC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-
-struct clk {
- struct clk *parent;
- /* id number of a root clock, 0 for normal clocks */
- int root_id;
- /* Reference count of clock enable/disable */
- int refcount;
- /* Address of associated BCLKCTRx register. Must be set. */
- void __iomem *bclkctr;
- /* Bit position for BCLKCTRx. Must be set. */
- int bclk_shift;
- /* Address of ACLKxxx register, if any. */
- void __iomem *aclkreg;
- /* get the current clock rate (always a fresh value) */
- unsigned long (*get_rate) (struct clk *);
- /* Function ptr to set the clock to a new rate. The rate must match a
- supported rate returned from round_rate. Leave blank if clock is not
- programmable */
- int (*set_rate) (struct clk *, unsigned long);
- /* Function ptr to round the requested clock rate to the nearest
- supported rate that is less than or equal to the requested rate. */
- unsigned long (*round_rate) (struct clk *, unsigned long);
- /* Function ptr to enable the clock. Leave blank if clock can not
- be gated. */
- int (*enable) (struct clk *);
- /* Function ptr to disable the clock. Leave blank if clock can not
- be gated. */
- void (*disable) (struct clk *);
- /* Function ptr to set the parent clock of the clock. */
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
deleted file mode 100644
index cf17d04ec30d..000000000000
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 1994-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
- .macro addruart, rp, rv, tmp
- moveq \rp, #0x90000000 @ physical base address
- movne \rv, #0xF1000000 @ virtual base
- orr \rp, \rp, #0x00007000 @ UART0
- orr \rv, \rv, #0x00007000 @ UART0
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #0x44]
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1001:
- ldr \rd, [\rx, #0x14]
- tst \rd, #0x20
-
- beq 1001b
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
deleted file mode 100644
index 748f401e4b6d..000000000000
--- a/arch/arm/plat-tcc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-tcc83x/entry-macro.S
- *
- * Author : <linux@telechips.com>
- * Created: June 10, 2008
- * Description: Low-level IRQ helper macros for Telechips-based platforms
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \base, =0xF2003000 @ base address of PIC registers
-
- @@ read MREQ register of PIC0
-
- mov \irqnr, #0
- ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts
- cmp \irqstat, #0
- bne 1001f
-
- @@ read MREQ register of PIC1
-
- ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts
- cmp \irqstat, #0
- beq 1002f
- mov \irqnr, #0x20
-
-1001:
- movs \tmp, \irqstat, lsl #16
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
-
- movs \tmp, \irqstat, lsl #8
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #8
-
- movs \tmp, \irqstat, lsl #4
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #4
-
- movs \tmp, \irqstat, lsl #2
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #2
-
- movs \tmp, \irqstat, lsl #1
- addeq \irqnr, \irqnr, #1
- orrs \base, \base, #1
-1002:
- @@ exit here, Z flag unset if IRQ
-
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
deleted file mode 100644
index e70d126ccaf3..000000000000
--- a/arch/arm/plat-tcc/include/mach/hardware.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- * and Dirk Behme <dirk.behme@de.bosch.com>
- * Rewritten by: <linux@telechips.com>
- * Description: Hardware definitions for TCC8300 processors and boards
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- *
- * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Pulic License version 2.
- */
-
-#ifndef __ASM_ARCH_TCC_HARDWARE_H
-#define __ASM_ARCH_TCC_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#endif
-#include <mach/io.h>
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE 0xfffece00
-#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-/* DPLL control registers */
-#define DPLL_CTL 0xfffecf00
-
-#endif /* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
deleted file mode 100644
index 3e911d3ea0f1..000000000000
--- a/arch/arm/plat-tcc/include/mach/io.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * IO definitions for TCC8000 processors and boards
- *
- * Copyright (C) 1997-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Public License version 2.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
deleted file mode 100644
index da863894d498..000000000000
--- a/arch/arm/plat-tcc/include/mach/irqs.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * IRQ definitions for TCC8xxx
- *
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_TCC_IRQS_H
-#define __ASM_ARCH_TCC_IRQS_H
-
-#define NR_IRQS 64
-
-/* PIC0 interrupts */
-#define INT_ADMA1 0
-#define INT_BDMA 1
-#define INT_ADMA0 2
-#define INT_GDMA1 3
-#define INT_I2S0RX 4
-#define INT_I2S0TX 5
-#define INT_TC 6
-#define INT_UART0 7
-#define INT_USBD 8
-#define INT_SPI0TX 9
-#define INT_UDMA 10
-#define INT_LIRQ 11
-#define INT_GDMA2 12
-#define INT_GDMA0 13
-#define INT_TC32 14
-#define INT_LCD 15
-#define INT_ADC 16
-#define INT_I2C 17
-#define INT_RTCP 18
-#define INT_RTCA 19
-#define INT_NFC 20
-#define INT_SD0 21
-#define INT_GSB0 22
-#define INT_PK 23
-#define INT_USBH0 24
-#define INT_USBH1 25
-#define INT_G2D 26
-#define INT_ECC 27
-#define INT_SPI0RX 28
-#define INT_UART1 29
-#define INT_MSCL 30
-#define INT_GSB1 31
-/* PIC1 interrupts */
-#define INT_E0 32
-#define INT_E1 33
-#define INT_E2 34
-#define INT_E3 35
-#define INT_E4 36
-#define INT_E5 37
-#define INT_E6 38
-#define INT_E7 39
-#define INT_UART2 40
-#define INT_UART3 41
-#define INT_SPI1TX 42
-#define INT_SPI1RX 43
-#define INT_GSB2 44
-#define INT_SPDIF 45
-#define INT_CDIF 46
-#define INT_VBON 47
-#define INT_VBOFF 48
-#define INT_SD1 49
-#define INT_UART4 50
-#define INT_GDMA3 51
-#define INT_I2S1RX 52
-#define INT_I2S1TX 53
-#define INT_CAN0 54
-#define INT_CAN1 55
-#define INT_GSB3 56
-#define INT_KRST 57
-#define INT_UNUSED 58
-#define INT_SD0D3 59
-#define INT_SD1D3 60
-#define INT_GPS0 61
-#define INT_GPS1 62
-#define INT_GPS2 63
-
-#endif /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
deleted file mode 100644
index 909e6035d843..000000000000
--- a/arch/arm/plat-tcc/include/mach/system.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- * Description: LINUX SYSTEM FUNCTIONS for TCC83x
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-extern void plat_tcc_reboot(void);
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- plat_tcc_reboot();
-}
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
deleted file mode 100644
index 1d9428295332..000000000000
--- a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * Telechips TCC8000 register definitions
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPLv2.
- */
-
-#ifndef TCC8K_REGS_H
-#define TCC8K_REGS_H
-
-#include <linux/types.h>
-
-#define EXT_SDRAM_BASE 0x20000000
-#define INT_SRAM_BASE 0x30000000
-#define INT_SRAM_SIZE SZ_32K
-#define CS0_BASE 0x40000000
-#define CS1_BASE 0x50000000
-#define CS1_SIZE SZ_64K
-#define CS2_BASE 0x60000000
-#define CS3_BASE 0x70000000
-#define AHB_PERI_BASE 0x80000000
-#define AHB_PERI_SIZE SZ_64K
-#define APB0_PERI_BASE 0x90000000
-#define APB0_PERI_SIZE SZ_128K
-#define APB1_PERI_BASE 0x98000000
-#define APB1_PERI_SIZE SZ_128K
-#define DATA_TCM_BASE 0xa0000000
-#define DATA_TCM_SIZE SZ_8K
-#define EXT_MEM_CTRL_BASE 0xf0000000
-#define EXT_MEM_CTRL_SIZE SZ_4K
-
-#define CS1_BASE_VIRT (void __iomem *)0xf7000000
-#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000
-#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000
-#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000
-#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000
-#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000
-#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000
-
-#define __REG(x) (*((volatile u32 *)(x)))
-
-/* USB Device Controller Registers */
-#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000)
-#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000)
-
-#define UDC_IR_OFFS 0x00
-#define UDC_EIR_OFFS 0x04
-#define UDC_EIER_OFFS 0x08
-#define UDC_FAR_OFFS 0x0c
-#define UDC_FNR_OFFS 0x10
-#define UDC_EDR_OFFS 0x14
-#define UDC_RT_OFFS 0x18
-#define UDC_SSR_OFFS 0x1c
-#define UDC_SCR_OFFS 0x20
-#define UDC_EP0SR_OFFS 0x24
-#define UDC_EP0CR_OFFS 0x28
-
-#define UDC_ESR_OFFS 0x2c
-#define UDC_ECR_OFFS 0x30
-#define UDC_BRCR_OFFS 0x34
-#define UDC_BWCR_OFFS 0x38
-#define UDC_MPR_OFFS 0x3c
-#define UDC_DCR_OFFS 0x40
-#define UDC_DTCR_OFFS 0x44
-#define UDC_DFCR_OFFS 0x48
-#define UDC_DTTCR1_OFFS 0x4c
-#define UDC_DTTCR2_OFFS 0x50
-#define UDC_ESR2_OFFS 0x54
-
-#define UDC_SCR2_OFFS 0x58
-#define UDC_EP0BUF_OFFS 0x60
-#define UDC_EP1BUF_OFFS 0x64
-#define UDC_EP2BUF_OFFS 0x68
-#define UDC_EP3BUF_OFFS 0x6c
-#define UDC_PLICR_OFFS 0xa0
-#define UDC_PCR_OFFS 0xa4
-
-#define UDC_UPCR0_OFFS 0xc8
-#define UDC_UPCR1_OFFS 0xcc
-#define UDC_UPCR2_OFFS 0xd0
-#define UDC_UPCR3_OFFS 0xd4
-
-/* Bits in UDC_EIR */
-#define UDC_EIR_EP0I (1 << 0)
-#define UDC_EIR_EP1I (1 << 1)
-#define UDC_EIR_EP2I (1 << 2)
-#define UDC_EIR_EP3I (1 << 3)
-#define UDC_EIR_EPI_MASK 0x0f
-
-/* Bits in UDC_EIER */
-#define UDC_EIER_EP0IE (1 << 0)
-#define UDC_EIER_EP1IE (1 << 1)
-#define UDC_EIER_EP2IE (1 << 2)
-#define UDC_EIER_EP3IE (1 << 3)
-
-/* Bits in UDC_FNR */
-#define UDC_FNR_FN_MASK 0x7ff
-#define UDC_FNR_SM (1 << 13)
-#define UDC_FNR_FTL (1 << 14)
-
-/* Bits in UDC_SSR */
-#define UDC_SSR_HFRES (1 << 0)
-#define UDC_SSR_HFSUSP (1 << 1)
-#define UDC_SSR_HFRM (1 << 2)
-#define UDC_SSR_SDE (1 << 3)
-#define UDC_SSR_HSP (1 << 4)
-#define UDC_SSR_DM (1 << 5)
-#define UDC_SSR_DP (1 << 6)
-#define UDC_SSR_TBM (1 << 7)
-#define UDC_SSR_VBON (1 << 8)
-#define UDC_SSR_VBOFF (1 << 9)
-#define UDC_SSR_EOERR (1 << 10)
-#define UDC_SSR_DCERR (1 << 11)
-#define UDC_SSR_TCERR (1 << 12)
-#define UDC_SSR_BSERR (1 << 13)
-#define UDC_SSR_TMERR (1 << 14)
-#define UDC_SSR_BAERR (1 << 15)
-
-/* Bits in UDC_SCR */
-#define UDC_SCR_HRESE (1 << 0)
-#define UDC_SCR_HSSPE (1 << 1)
-#define UDC_SCR_RRDE (1 << 5)
-#define UDC_SCR_SPDEN (1 << 6)
-#define UDC_SCR_DIEN (1 << 12)
-
-/* Bits in UDC_EP0SR */
-#define UDC_EP0SR_RSR (1 << 0)
-#define UDC_EP0SR_TST (1 << 1)
-#define UDC_EP0SR_SHT (1 << 4)
-#define UDC_EP0SR_LWO (1 << 6)
-
-/* Bits in UDC_EP0CR */
-#define UDC_EP0CR_ESS (1 << 1)
-
-/* Bits in UDC_ESR */
-#define UDC_ESR_RPS (1 << 0)
-#define UDC_ESR_TPS (1 << 1)
-#define UDC_ESR_LWO (1 << 4)
-#define UDC_ESR_FFS (1 << 6)
-
-/* Bits in UDC_ECR */
-#define UDC_ECR_ESS (1 << 1)
-#define UDC_ECR_CDP (1 << 2)
-
-#define UDC_ECR_FLUSH (1 << 6)
-#define UDC_ECR_DUEN (1 << 7)
-
-/* Bits in UDC_UPCR0 */
-#define UDC_UPCR0_VBD (1 << 1)
-#define UDC_UPCR0_VBDS (1 << 6)
-#define UDC_UPCR0_RCD_12 (0x0 << 9)
-#define UDC_UPCR0_RCD_24 (0x1 << 9)
-#define UDC_UPCR0_RCD_48 (0x2 << 9)
-#define UDC_UPCR0_RCS_EXT (0x1 << 11)
-#define UDC_UPCR0_RCS_XTAL (0x0 << 11)
-
-/* Bits in UDC_UPCR1 */
-#define UDC_UPCR1_CDT(x) ((x) << 0)
-#define UDC_UPCR1_OTGT(x) ((x) << 3)
-#define UDC_UPCR1_SQRXT(x) ((x) << 8)
-#define UDC_UPCR1_TXFSLST(x) ((x) << 12)
-
-/* Bits in UDC_UPCR2 */
-#define UDC_UPCR2_TP (1 << 0)
-#define UDC_UPCR2_TXRT(x) ((x) << 2)
-#define UDC_UPCR2_TXVRT(x) ((x) << 5)
-#define UDC_UPCR2_OPMODE(x) ((x) << 9)
-#define UDC_UPCR2_XCVRSEL(x) ((x) << 12)
-#define UDC_UPCR2_TM (1 << 14)
-
-/* USB Host Controller registers */
-#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000)
-#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800)
-
-#define OHCI_INT_ENABLE_OFFS 0x10
-
-#define RH_DESCRIPTOR_A_OFFS 0x48
-#define RH_DESCRIPTOR_B_OFFS 0x4c
-
-#define USBHTCFG0_OFFS 0x100
-#define USBHHCFG0_OFFS 0x104
-#define USBHHCFG1_OFFS 0x104
-
-/* DMA controller registers */
-#define DMAC0_BASE (AHB_PERI_BASE + 0x4000)
-#define DMAC1_BASE (AHB_PERI_BASE + 0xa000)
-#define DMAC2_BASE (AHB_PERI_BASE + 0x4800)
-#define DMAC3_BASE (AHB_PERI_BASE + 0xa800)
-
-#define DMAC_CH_OFFSET(ch) (ch * 0x30)
-
-#define ST_SADR_OFFS 0x00
-#define SPARAM_OFFS 0x04
-#define C_SADR_OFFS 0x0c
-#define ST_DADR_OFFS 0x10
-#define DPARAM_OFFS 0x14
-#define C_DADR_OFFS 0x1c
-#define HCOUNT_OFFS 0x20
-#define CHCTRL_OFFS 0x24
-#define RPTCTRL_OFFS 0x28
-#define EXTREQ_A_OFFS 0x2c
-
-/* Bits in CHCTRL register */
-#define CHCTRL_EN (1 << 0)
-
-#define CHCTRL_IEN (1 << 2)
-#define CHCTRL_FLAG (1 << 3)
-#define CHCTRL_WSIZE8 (0 << 4)
-#define CHCTRL_WSIZE16 (1 << 4)
-#define CHCTRL_WSIZE32 (2 << 4)
-
-#define CHCTRL_BSIZE1 (0 << 6)
-#define CHCTRL_BSIZE2 (1 << 6)
-#define CHCTRL_BSIZE4 (2 << 6)
-#define CHCTRL_BSIZE8 (3 << 6)
-
-#define CHCTRL_TYPE_SINGLE_E (0 << 8)
-#define CHCTRL_TYPE_HW (1 << 8)
-#define CHCTRL_TYPE_SW (2 << 8)
-#define CHCTRL_TYPE_SINGLE_L (3 << 8)
-
-#define CHCTRL_BST (1 << 10)
-
-/* Use DMA controller 0, channel 2 for USB */
-#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2))
-
-/* NAND flash controller registers */
-#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000)
-#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000)
-
-#define NFC_CMD_OFFS 0x00
-#define NFC_LADDR_OFFS 0x04
-#define NFC_BADDR_OFFS 0x08
-#define NFC_SADDR_OFFS 0x0c
-#define NFC_WDATA_OFFS 0x10
-#define NFC_LDATA_OFFS 0x20
-#define NFC_SDATA_OFFS 0x40
-#define NFC_CTRL_OFFS 0x50
-#define NFC_PSTART_OFFS 0x54
-#define NFC_RSTART_OFFS 0x58
-#define NFC_DSIZE_OFFS 0x5c
-#define NFC_IREQ_OFFS 0x60
-#define NFC_RST_OFFS 0x64
-#define NFC_CTRL1_OFFS 0x68
-#define NFC_MDATA_OFFS 0x70
-
-#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS)
-
-/* Bits in NFC_CTRL */
-#define NFC_CTRL_BHLD_MASK (0xf << 0)
-#define NFC_CTRL_BPW_MASK (0xf << 4)
-#define NFC_CTRL_BSTP_MASK (0xf << 8)
-#define NFC_CTRL_CADDR_MASK (0x7 << 12)
-#define NFC_CTRL_CADDR_1 (0x0 << 12)
-#define NFC_CTRL_CADDR_2 (0x1 << 12)
-#define NFC_CTRL_CADDR_3 (0x2 << 12)
-#define NFC_CTRL_CADDR_4 (0x3 << 12)
-#define NFC_CTRL_CADDR_5 (0x4 << 12)
-#define NFC_CTRL_MSK (1 << 15)
-#define NFC_CTRL_PSIZE256 (0 << 16)
-#define NFC_CTRL_PSIZE512 (1 << 16)
-#define NFC_CTRL_PSIZE1024 (2 << 16)
-#define NFC_CTRL_PSIZE2048 (3 << 16)
-#define NFC_CTRL_PSIZE4096 (4 << 16)
-#define NFC_CTRL_PSIZE_MASK (7 << 16)
-#define NFC_CTRL_BSIZE1 (0 << 19)
-#define NFC_CTRL_BSIZE2 (1 << 19)
-#define NFC_CTRL_BSIZE4 (2 << 19)
-#define NFC_CTRL_BSIZE8 (3 << 19)
-#define NFC_CTRL_BSIZE_MASK (3 << 19)
-#define NFC_CTRL_RDY (1 << 21)
-#define NFC_CTRL_CS0SEL (1 << 22)
-#define NFC_CTRL_CS1SEL (1 << 23)
-#define NFC_CTRL_CS2SEL (1 << 24)
-#define NFC_CTRL_CS3SEL (1 << 25)
-#define NFC_CTRL_CSMASK (0xf << 22)
-#define NFC_CTRL_BW (1 << 26)
-#define NFC_CTRL_FS (1 << 27)
-#define NFC_CTRL_DEN (1 << 28)
-#define NFC_CTRL_READ_IEN (1 << 29)
-#define NFC_CTRL_PROG_IEN (1 << 30)
-#define NFC_CTRL_RDY_IEN (1 << 31)
-
-/* Bits in NFC_IREQ */
-#define NFC_IREQ_IRQ0 (1 << 0)
-#define NFC_IREQ_IRQ1 (1 << 1)
-#define NFC_IREQ_IRQ2 (1 << 2)
-
-#define NFC_IREQ_FLAG0 (1 << 4)
-#define NFC_IREQ_FLAG1 (1 << 5)
-#define NFC_IREQ_FLAG2 (1 << 6)
-
-/* MMC controller registers */
-#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000)
-#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800)
-
-/* UART base addresses */
-
-#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000)
-#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000)
-#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000)
-#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000)
-#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000)
-#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000)
-#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000)
-#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000)
-#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000)
-#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000)
-
-#define UART_BASE UART0_BASE
-#define UART_BASE_PHYS UART0_BASE_PHYS
-
-/* ECC controller */
-#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000)
-
-#define ECC_CTRL_OFFS 0x00
-#define ECC_BASE_OFFS 0x04
-#define ECC_MASK_OFFS 0x08
-#define ECC_CLEAR_OFFS 0x0c
-#define ECC4_0_OFFS 0x10
-#define ECC4_1_OFFS 0x14
-
-#define ECC_EADDR0_OFFS 0x50
-
-#define ECC_ERRNUM_OFFS 0x90
-#define ECC_IREQ_OFFS 0x94
-
-/* Bits in ECC_CTRL */
-#define ECC_CTRL_ECC4_DIEN (1 << 28)
-#define ECC_CTRL_ECC8_DIEN (1 << 29)
-#define ECC_CTRL_ECC12_DIEN (1 << 30)
-#define ECC_CTRL_ECC_DISABLE 0x0
-#define ECC_CTRL_ECC_SLC_ENC 0x8
-#define ECC_CTRL_ECC_SLC_DEC 0x9
-#define ECC_CTRL_ECC4_ENC 0xa
-#define ECC_CTRL_ECC4_DEC 0xb
-#define ECC_CTRL_ECC8_ENC 0xc
-#define ECC_CTRL_ECC8_DEC 0xd
-#define ECC_CTRL_ECC12_ENC 0xe
-#define ECC_CTRL_ECC12_DEC 0xf
-
-/* Bits in ECC_IREQ */
-#define ECC_IREQ_E4DI (1 << 4)
-
-#define ECC_IREQ_E4DF (1 << 20)
-#define ECC_IREQ_E4EF (1 << 21)
-
-/* Interrupt controller */
-
-#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000)
-#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000)
-
-#define PIC0_IEN_OFFS 0x00
-#define PIC0_CREQ_OFFS 0x04
-#define PIC0_IREQ_OFFS 0x08
-#define PIC0_IRQSEL_OFFS 0x0c
-#define PIC0_SRC_OFFS 0x10
-#define PIC0_MREQ_OFFS 0x14
-#define PIC0_TSTREQ_OFFS 0x18
-#define PIC0_POL_OFFS 0x1c
-#define PIC0_IRQ_OFFS 0x20
-#define PIC0_FIQ_OFFS 0x24
-#define PIC0_MIRQ_OFFS 0x28
-#define PIC0_MFIQ_OFFS 0x2c
-#define PIC0_TMODE_OFFS 0x30
-#define PIC0_SYNC_OFFS 0x34
-#define PIC0_WKUP_OFFS 0x38
-#define PIC0_TMODEA_OFFS 0x3c
-#define PIC0_INTOEN_OFFS 0x40
-#define PIC0_MEN0_OFFS 0x44
-#define PIC0_MEN_OFFS 0x48
-
-#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS)
-#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
-#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS)
-#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
-#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS)
-#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
-#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
-#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS)
-#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS)
-#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
-#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS)
-#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS)
-#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS)
-#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS)
-#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS)
-#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS)
-#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
-#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS)
-#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS)
-#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS)
-#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS)
-#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS)
-#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS)
-
-#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080)
-
-#define PIC1_IEN_OFFS 0x00
-#define PIC1_CREQ_OFFS 0x04
-#define PIC1_IREQ_OFFS 0x08
-#define PIC1_IRQSEL_OFFS 0x0c
-#define PIC1_SRC_OFFS 0x10
-#define PIC1_MREQ_OFFS 0x14
-#define PIC1_TSTREQ_OFFS 0x18
-#define PIC1_POL_OFFS 0x1c
-#define PIC1_IRQ_OFFS 0x20
-#define PIC1_FIQ_OFFS 0x24
-#define PIC1_MIRQ_OFFS 0x28
-#define PIC1_MFIQ_OFFS 0x2c
-#define PIC1_TMODE_OFFS 0x30
-#define PIC1_SYNC_OFFS 0x34
-#define PIC1_WKUP_OFFS 0x38
-#define PIC1_TMODEA_OFFS 0x3c
-#define PIC1_INTOEN_OFFS 0x40
-#define PIC1_MEN1_OFFS 0x44
-#define PIC1_MEN_OFFS 0x48
-
-#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS)
-#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS)
-#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS)
-#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
-#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS)
-#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS)
-#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
-#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS)
-#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS)
-#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS)
-#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS)
-#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS)
-#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS)
-#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS)
-#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS)
-#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS)
-#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS)
-#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS)
-#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS)
-
-/* Timer registers */
-#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000)
-#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000)
-
-#define TWDCFG_OFFS 0x70
-
-#define TC32EN_OFFS 0x80
-#define TC32LDV_OFFS 0x84
-#define TC32CMP0_OFFS 0x88
-#define TC32CMP1_OFFS 0x8c
-#define TC32PCNT_OFFS 0x90
-#define TC32MCNT_OFFS 0x94
-#define TC32IRQ_OFFS 0x98
-
-/* Bits in TC32EN */
-#define TC32EN_PRESCALE_MASK 0x00ffffff
-#define TC32EN_ENABLE (1 << 24)
-#define TC32EN_LOADZERO (1 << 25)
-#define TC32EN_STOPMODE (1 << 26)
-#define TC32EN_LDM0 (1 << 28)
-#define TC32EN_LDM1 (1 << 29)
-
-/* Bits in TC32IRQ */
-#define TC32IRQ_MSTAT_MASK 0x0000001f
-#define TC32IRQ_RSTAT_MASK (0x1f << 8)
-#define TC32IRQ_IRQEN0 (1 << 16)
-#define TC32IRQ_IRQEN1 (1 << 17)
-#define TC32IRQ_IRQEN2 (1 << 18)
-#define TC32IRQ_IRQEN3 (1 << 19)
-#define TC32IRQ_IRQEN4 (1 << 20)
-#define TC32IRQ_RSYNC (1 << 30)
-#define TC32IRQ_IRQCLR (1 << 31)
-
-/* GPIO registers */
-#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPD_DAT_OFFS 0x00
-#define GPIOPD_DOE_OFFS 0x04
-#define GPIOPD_FS0_OFFS 0x08
-#define GPIOPD_FS1_OFFS 0x0c
-#define GPIOPD_FS2_OFFS 0x10
-#define GPIOPD_RPU_OFFS 0x30
-#define GPIOPD_RPD_OFFS 0x34
-#define GPIOPD_DV0_OFFS 0x38
-#define GPIOPD_DV1_OFFS 0x3c
-
-#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPS_DAT_OFFS 0x40
-#define GPIOPS_DOE_OFFS 0x44
-#define GPIOPS_FS0_OFFS 0x48
-#define GPIOPS_FS1_OFFS 0x4c
-#define GPIOPS_FS2_OFFS 0x50
-#define GPIOPS_FS3_OFFS 0x54
-#define GPIOPS_RPU_OFFS 0x70
-#define GPIOPS_RPD_OFFS 0x74
-#define GPIOPS_DV0_OFFS 0x78
-#define GPIOPS_DV1_OFFS 0x7c
-
-#define GPIOPS_FS1_SDH0_BITS 0x000000ff
-#define GPIOPS_FS1_SDH1_BITS 0x0000ff00
-
-#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPU_DAT_OFFS 0x80
-#define GPIOPU_DOE_OFFS 0x84
-#define GPIOPU_FS0_OFFS 0x88
-#define GPIOPU_FS1_OFFS 0x8c
-#define GPIOPU_FS2_OFFS 0x90
-#define GPIOPU_RPU_OFFS 0xb0
-#define GPIOPU_RPD_OFFS 0xb4
-#define GPIOPU_DV0_OFFS 0xb8
-#define GPIOPU_DV1_OFFS 0xbc
-
-#define GPIOPU_FS0_TXD0 (1 << 0)
-#define GPIOPU_FS0_RXD0 (1 << 1)
-#define GPIOPU_FS0_CTS0 (1 << 2)
-#define GPIOPU_FS0_RTS0 (1 << 3)
-#define GPIOPU_FS0_TXD1 (1 << 4)
-#define GPIOPU_FS0_RXD1 (1 << 5)
-#define GPIOPU_FS0_CTS1 (1 << 6)
-#define GPIOPU_FS0_RTS1 (1 << 7)
-#define GPIOPU_FS0_TXD2 (1 << 8)
-#define GPIOPU_FS0_RXD2 (1 << 9)
-#define GPIOPU_FS0_CTS2 (1 << 10)
-#define GPIOPU_FS0_RTS2 (1 << 11)
-#define GPIOPU_FS0_TXD3 (1 << 12)
-#define GPIOPU_FS0_RXD3 (1 << 13)
-#define GPIOPU_FS0_CTS3 (1 << 14)
-#define GPIOPU_FS0_RTS3 (1 << 15)
-#define GPIOPU_FS0_TXD4 (1 << 16)
-#define GPIOPU_FS0_RXD4 (1 << 17)
-#define GPIOPU_FS0_CTS4 (1 << 18)
-#define GPIOPU_FS0_RTS4 (1 << 19)
-
-#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFC_DAT_OFFS 0xc0
-#define GPIOFC_DOE_OFFS 0xc4
-#define GPIOFC_FS0_OFFS 0xc8
-#define GPIOFC_FS1_OFFS 0xcc
-#define GPIOFC_FS2_OFFS 0xd0
-#define GPIOFC_FS3_OFFS 0xd4
-#define GPIOFC_RPU_OFFS 0xf0
-#define GPIOFC_RPD_OFFS 0xf4
-#define GPIOFC_DV0_OFFS 0xf8
-#define GPIOFC_DV1_OFFS 0xfc
-
-#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFD_DAT_OFFS 0x100
-#define GPIOFD_DOE_OFFS 0x104
-#define GPIOFD_FS0_OFFS 0x108
-#define GPIOFD_FS1_OFFS 0x10c
-#define GPIOFD_FS2_OFFS 0x110
-#define GPIOFD_RPU_OFFS 0x130
-#define GPIOFD_RPD_OFFS 0x134
-#define GPIOFD_DV0_OFFS 0x138
-#define GPIOFD_DV1_OFFS 0x13c
-
-#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLC_DAT_OFFS 0x140
-#define GPIOLC_DOE_OFFS 0x144
-#define GPIOLC_FS0_OFFS 0x148
-#define GPIOLC_FS1_OFFS 0x14c
-#define GPIOLC_RPU_OFFS 0x170
-#define GPIOLC_RPD_OFFS 0x174
-#define GPIOLC_DV0_OFFS 0x178
-#define GPIOLC_DV1_OFFS 0x17c
-
-#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLD_DAT_OFFS 0x180
-#define GPIOLD_DOE_OFFS 0x184
-#define GPIOLD_FS0_OFFS 0x188
-#define GPIOLD_FS1_OFFS 0x18c
-#define GPIOLD_FS2_OFFS 0x190
-#define GPIOLD_RPU_OFFS 0x1b0
-#define GPIOLD_RPD_OFFS 0x1b4
-#define GPIOLD_DV0_OFFS 0x1b8
-#define GPIOLD_DV1_OFFS 0x1bc
-
-#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOAD_DAT_OFFS 0x1c0
-#define GPIOAD_DOE_OFFS 0x1c4
-#define GPIOAD_FS0_OFFS 0x1c8
-#define GPIOAD_RPU_OFFS 0x1f0
-#define GPIOAD_RPD_OFFS 0x1f4
-#define GPIOAD_DV0_OFFS 0x1f8
-#define GPIOAD_DV1_OFFS 0x1fc
-
-#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXC_DAT_OFFS 0x200
-#define GPIOXC_DOE_OFFS 0x204
-#define GPIOXC_FS0_OFFS 0x208
-#define GPIOXC_RPU_OFFS 0x230
-#define GPIOXC_RPD_OFFS 0x234
-#define GPIOXC_DV0_OFFS 0x238
-#define GPIOXC_DV1_OFFS 0x23c
-
-#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
-
-#define GPIOXC_FS0_CS0 (1 << 26)
-#define GPIOXC_FS0_CS1 (1 << 27)
-
-#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXD_DAT_OFFS 0x240
-#define GPIOXD_FS0_OFFS 0x248
-#define GPIOXD_RPU_OFFS 0x270
-#define GPIOXD_RPD_OFFS 0x274
-#define GPIOXD_DV0_OFFS 0x278
-#define GPIOXD_DV1_OFFS 0x27c
-
-#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000)
-
-#define GPIOPK_RST_OFFS 0x008
-#define GPIOPK_DAT_OFFS 0x100
-#define GPIOPK_DOE_OFFS 0x104
-#define GPIOPK_FS0_OFFS 0x108
-#define GPIOPK_FS1_OFFS 0x10c
-#define GPIOPK_FS2_OFFS 0x110
-#define GPIOPK_IRQST_OFFS 0x210
-#define GPIOPK_IRQEN_OFFS 0x214
-#define GPIOPK_IRQPOL_OFFS 0x218
-#define GPIOPK_IRQTM0_OFFS 0x21c
-#define GPIOPK_IRQTM1_OFFS 0x220
-#define GPIOPK_CTL_OFFS 0x22c
-
-#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000)
-#define BACKUP_RAM_BASE PMGPIO_BASE
-
-#define PMGPIO_DAT_OFFS 0x800
-#define PMGPIO_DOE_OFFS 0x804
-#define PMGPIO_FS0_OFFS 0x808
-#define PMGPIO_RPU_OFFS 0x810
-#define PMGPIO_RPD_OFFS 0x814
-#define PMGPIO_DV0_OFFS 0x818
-#define PMGPIO_DV1_OFFS 0x81c
-#define PMGPIO_EE0_OFFS 0x820
-#define PMGPIO_EE1_OFFS 0x824
-#define PMGPIO_CTL_OFFS 0x828
-#define PMGPIO_DI_OFFS 0x82c
-#define PMGPIO_STR_OFFS 0x830
-#define PMGPIO_STF_OFFS 0x834
-#define PMGPIO_POL_OFFS 0x838
-#define PMGPIO_APB_OFFS 0x800
-
-/* Clock controller registers */
-#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
-
-#define CLKCTRL_OFFS 0x00
-#define PLL0CFG_OFFS 0x04
-#define PLL1CFG_OFFS 0x08
-#define CLKDIVC0_OFFS 0x0c
-
-#define BCLKCTR0_OFFS 0x14
-#define SWRESET0_OFFS 0x18
-
-#define BCLKCTR1_OFFS 0x60
-#define SWRESET1_OFFS 0x64
-#define PWDCTL_OFFS 0x68
-#define PLL2CFG_OFFS 0x6c
-#define CLKDIVC1_OFFS 0x70
-
-#define ACLKREF_OFFS 0x80
-#define ACLKI2C_OFFS 0x84
-#define ACLKSPI0_OFFS 0x88
-#define ACLKSPI1_OFFS 0x8c
-#define ACLKUART0_OFFS 0x90
-#define ACLKUART1_OFFS 0x94
-#define ACLKUART2_OFFS 0x98
-#define ACLKUART3_OFFS 0x9c
-#define ACLKUART4_OFFS 0xa0
-#define ACLKTCT_OFFS 0xa4
-#define ACLKTCX_OFFS 0xa8
-#define ACLKTCZ_OFFS 0xac
-#define ACLKADC_OFFS 0xb0
-#define ACLKDAI0_OFFS 0xb4
-#define ACLKDAI1_OFFS 0xb8
-#define ACLKLCD_OFFS 0xbc
-#define ACLKSPDIF_OFFS 0xc0
-#define ACLKUSBH_OFFS 0xc4
-#define ACLKSDH0_OFFS 0xc8
-#define ACLKSDH1_OFFS 0xcc
-#define ACLKC3DEC_OFFS 0xd0
-#define ACLKEXT_OFFS 0xd4
-#define ACLKCAN0_OFFS 0xd8
-#define ACLKCAN1_OFFS 0xdc
-#define ACLKGSB0_OFFS 0xe0
-#define ACLKGSB1_OFFS 0xe4
-#define ACLKGSB2_OFFS 0xe8
-#define ACLKGSB3_OFFS 0xec
-
-#define PLLxCFG_PD (1 << 31)
-
-/* CLKCTRL bits */
-#define CLKCTRL_XE (1 << 31)
-
-/* CLKDIVCx bits */
-#define CLKDIVC0_XTE (1 << 7)
-#define CLKDIVC0_XE (1 << 15)
-#define CLKDIVC0_P1E (1 << 23)
-#define CLKDIVC0_P0E (1 << 31)
-
-#define CLKDIVC1_P2E (1 << 7)
-
-/* BCLKCTR0 clock bits */
-#define BCLKCTR0_USBD (1 << 4)
-#define BCLKCTR0_ECC (1 << 9)
-#define BCLKCTR0_USBH0 (1 << 11)
-#define BCLKCTR0_NFC (1 << 16)
-
-/* BCLKCTR1 clock bits */
-#define BCLKCTR1_USBH1 (1 << 20)
-
-/* SWRESET0 bits */
-#define SWRESET0_USBD (1 << 4)
-#define SWRESET0_USBH0 (1 << 11)
-
-/* SWRESET1 bits */
-#define SWRESET1_USBH1 (1 << 20)
-
-/* System clock sources.
- * Note: These are the clock sources that serve as parents for
- * all other clocks. They have no parents themselves.
- *
- * These values are used for struct clk->root_id. All clocks
- * that are not system clock sources have this value set to
- * CLK_SRC_NOROOT.
- * The values for system clocks start with CLK_SRC_PLL0 == 0
- * because this gives us exactly the values needed for the lower
- * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
- * defined as -1 to not disturb the order.
- */
-enum root_clks {
- CLK_SRC_NOROOT = -1,
- CLK_SRC_PLL0 = 0,
- CLK_SRC_PLL1,
- CLK_SRC_PLL0DIV,
- CLK_SRC_PLL1DIV,
- CLK_SRC_XI,
- CLK_SRC_XIDIV,
- CLK_SRC_XTI,
- CLK_SRC_XTIDIV,
- CLK_SRC_PLL2,
- CLK_SRC_PLL2DIV,
- CLK_SRC_PK0,
- CLK_SRC_PK1,
- CLK_SRC_PK2,
- CLK_SRC_PK3,
- CLK_SRC_PK4,
- CLK_SRC_48MHZ
-};
-
-#define CLK_SRC_MASK 0xf
-
-/* Bits in ACLK* registers */
-#define ACLK_EN (1 << 28)
-#define ACLK_SEL_SHIFT 24
-#define ACLK_SEL_MASK 0x0f000000
-#define ACLK_DIV_MASK 0x00000fff
-
-/* System configuration registers */
-
-#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000)
-
-#define BMI_OFFS 0x00
-#define AHBCON0_OFFS 0x04
-#define APBPWE_OFFS 0x08
-#define DTCMWAIT_OFFS 0x0c
-#define ECCSEL_OFFS 0x10
-#define AHBCON1_OFFS 0x14
-#define SDHCFG_OFFS 0x18
-#define REMAP_OFFS 0x20
-#define LCDSIAE_OFFS 0x24
-#define XMCCFG_OFFS 0xe0
-#define IMCCFG_OFFS 0xe4
-
-/* Values for ECCSEL */
-#define ECCSEL_EXTMEM 0x0
-#define ECCSEL_DTCM 0x1
-#define ECCSEL_INT_SRAM 0x2
-#define ECCSEL_AHB 0x3
-
-/* Bits in XMCCFG */
-#define XMCCFG_NFCE (1 << 1)
-#define XMCCFG_FDXD (1 << 2)
-
-/* External memory controller registers */
-
-#define EMC_BASE EXT_MEM_CTRL_BASE
-
-#define SDCFG_OFFS 0x00
-#define SDFSM_OFFS 0x04
-#define MCFG_OFFS 0x08
-
-#define CSCFG0_OFFS 0x10
-#define CSCFG1_OFFS 0x14
-#define CSCFG2_OFFS 0x18
-#define CSCFG3_OFFS 0x1c
-
-#define MCFG_SDEN (1 << 4)
-
-#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
deleted file mode 100644
index 057acbe651d9..000000000000
--- a/arch/arm/plat-tcc/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * A definition needed by arch core code.
- *
- */
-#define CLOCK_TICK_RATE (HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
deleted file mode 100644
index 7a3e33a27a30..000000000000
--- a/arch/arm/plat-tcc/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This file is licensed under the terms of the GPL version 2.
- */
-
-#include <linux/serial_reg.h>
-#include <linux/types.h>
-
-#include <mach/tcc8k-regs.h>
-
-unsigned int system_rev;
-
-#define ID_MASK 0x7fff
-
-static void putc(int c)
-{
- u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
- u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
-
- while (!(*uart_lsr & UART_LSR_THRE))
- barrier();
- *uart_tx = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h
deleted file mode 100644
index 99414d9c2b94..000000000000
--- a/arch/arm/plat-tcc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- *
- * Copyright (C) 2000 Russell King.
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- */
-#define VMALLOC_END 0xf0000000UL
OpenPOWER on IntegriCloud