diff options
Diffstat (limited to 'arch/arm/plat-omap')
41 files changed, 233 insertions, 6949 deletions
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index dacaee009a4e..8d885848600a 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,13 +3,12 @@ # # Common support -obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o +obj-y := sram.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- := # omap_device support (OMAP2+ only at the moment) -obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o @@ -20,4 +19,3 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c deleted file mode 100644 index 9d7ac20ef8f9..000000000000 --- a/arch/arm/plat-omap/clock.c +++ /dev/null @@ -1,544 +0,0 @@ -/* - * linux/arch/arm/plat-omap/clock.c - * - * Copyright (C) 2004 - 2008 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * - * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/export.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/cpufreq.h> -#include <linux/io.h> - -#include <plat/clock.h> - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); - -static struct clk_functions *arch_clock; - -/* - * Standard clock functions defined in include/linux/clk.h - */ - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (!arch_clock || !arch_clock->clk_enable) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - if (!arch_clock || !arch_clock->clk_disable) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - pr_err("Trying disable clock %s with 0 usecount\n", - clk->name); - WARN_ON(1); - goto out; - } - - arch_clock->clk_disable(clk); - -out: - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->rate; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * Optional clock functions defined in include/linux/clk.h - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - if (!arch_clock || !arch_clock->clk_round_rate) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_round_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_rate) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_set_rate(clk, rate); - if (ret == 0) - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_parent) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - ret = arch_clock->clk_set_parent(clk, parent); - if (ret == 0) - propagate_rate(clk); - } else - ret = -EBUSY; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -/* - * OMAP specific clock functions shared between omap1 and omap2 - */ - -int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - -/* Used for clocks that always have same value as the parent clock */ -unsigned long followparent_recalc(struct clk *clk) -{ - return clk->parent->rate; -} - -/* - * Used for clocks that have the same value as the parent clock, - * divided by some factor - */ -unsigned long omap_fixed_divisor_recalc(struct clk *clk) -{ - WARN_ON(!clk->fixed_div); - - return clk->parent->rate / clk->fixed_div; -} - -void clk_reparent(struct clk *child, struct clk *parent) -{ - list_del_init(&child->sibling); - if (parent) - list_add(&child->sibling, &parent->children); - child->parent = parent; - - /* now do the debugfs renaming to reattach the child - to the proper parent */ -} - -/* Propagate rate to children */ -void propagate_rate(struct clk *tclk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &tclk->children, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -static LIST_HEAD(root_clks); - -/** - * recalculate_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - * Called at init. - */ -void recalculate_root_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &root_clks, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -/** - * clk_preinit - initialize any fields in the struct clk before clk init - * @clk: struct clk * to initialize - * - * Initialize any struct clk fields needed before normal clk initialization - * can run. No return value. - */ -void clk_preinit(struct clk *clk) -{ - INIT_LIST_HEAD(&clk->children); -} - -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - /* - * trap out already registered clocks - */ - if (clk->node.next || clk->node.prev) - return 0; - - mutex_lock(&clocks_mutex); - if (clk->parent) - list_add(&clk->sibling, &clk->parent->children); - else - list_add(&clk->sibling, &root_clks); - - list_add(&clk->node, &clocks); - if (clk->init) - clk->init(clk); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->sibling); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -void clk_enable_init_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clocks, node) { - if (clkp->flags & ENABLE_ON_INIT) - clk_enable(clkp); - } -} - -int omap_clk_enable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->allow_idle) - c->ops->allow_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -int omap_clk_disable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->deny_idle) - c->ops->deny_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -/* - * Low level helpers - */ -static int clkll_enable_null(struct clk *clk) -{ - return 0; -} - -static void clkll_disable_null(struct clk *clk) -{ -} - -const struct clkops clkops_null = { - .enable = clkll_enable_null, - .disable = clkll_disable_null, -}; - -/* - * Dummy clock - * - * Used for clock aliases that are needed on some OMAPs, but not others - */ -struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_null, -}; - -/* - * - */ - -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -static int __init clk_disable_unused(void) -{ - struct clk *ck; - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_disable_unused) - return 0; - - pr_info("clock: disabling unused clocks to save power\n"); - - spin_lock_irqsave(&clockfw_lock, flags); - list_for_each_entry(ck, &clocks, node) { - if (ck->ops == &clkops_null) - continue; - - if (ck->usecount > 0 || !ck->enable_reg) - continue; - - arch_clock->clk_disable_unused(ck); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -late_initcall(clk_disable_unused); -late_initcall(omap_clk_enable_autoidle_all); -#endif - -int __init clk_init(struct clk_functions * custom_clocks) -{ - if (!custom_clocks) { - pr_err("No custom clock functions registered\n"); - BUG(); - } - - arch_clock = custom_clocks; - - return 0; -} - -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) -/* - * debugfs support to trace clock tree hierarchy and attributes - */ - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static struct dentry *clk_debugfs_root; - -static int clk_dbg_show_summary(struct seq_file *s, void *unused) -{ - struct clk *c; - struct clk *pa; - - mutex_lock(&clocks_mutex); - seq_printf(s, "%-30s %-30s %-10s %s\n", - "clock-name", "parent-name", "rate", "use-count"); - - list_for_each_entry(c, &clocks, node) { - pa = c->parent; - seq_printf(s, "%-30s %-30s %-10lu %d\n", - c->name, pa ? pa->name : "none", c->rate, c->usecount); - } - mutex_unlock(&clocks_mutex); - - return 0; -} - -static int clk_dbg_open(struct inode *inode, struct file *file) -{ - return single_open(file, clk_dbg_show_summary, inode->i_private); -} - -static const struct file_operations debug_clock_fops = { - .open = clk_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->parent; - - d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dent = d; - - d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - - d = debugfs_create_file("summary", S_IRUGO, - d, NULL, &debug_clock_fops); - if (!d) - return -ENOMEM; - - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c deleted file mode 100644 index 111315a69354..000000000000 --- a/arch/arm/plat-omap/common.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/arm/plat-omap/common.c - * - * Code common to all OMAP machines. - * The file is created by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/dma-mapping.h> - -#include <plat/common.h> -#include <plat/vram.h> -#include <linux/platform_data/dsp-omap.h> -#include <plat/dma.h> - -#include <plat/omap-secure.h> - -void __init omap_reserve(void) -{ - omap_vram_reserve_sdram_memblock(); - omap_dsp_reserve_sdram_memblock(); - omap_secure_ram_reserve_memblock(); - omap_barrier_reserve_memblock(); -} - -void __init omap_init_consistent_dma_size(void) -{ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); -#endif -} - -/* - * Stub function for OMAP2 so that common files - * continue to build when custom builds are used - */ -int __weak omap_secure_ram_reserve_memblock(void) -{ - return 0; -} diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 87ba8dd0d791..f3771cdb9838 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,9 +22,6 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <plat/common.h> -#include <plat/clock.h> - /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 5a4678edd65a..a609e2161817 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -15,8 +15,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <mach/hardware.h> -#include "../mach-omap2/debug-devices.h" +#include <plat/debug-devices.h> /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index ea29bbe8e5cf..c43ea21f33b4 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -17,16 +17,33 @@ #include <linux/platform_data/gpio-omap.h> #include <linux/slab.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include <plat/fpga.h> - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the * debug board (all green), accessed through FPGA registers. */ +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + static struct h2p2_dbg_fpga __iomem *fpga; static u16 fpga_led_state; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c76ed8bff838..c288b76f8e6c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,9 +36,7 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <plat/cpu.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA @@ -175,12 +173,13 @@ static inline void set_gdma_dev(int req, int dev) #define omap_writel(val, reg) do {} while (0) #endif +#ifdef CONFIG_ARCH_OMAP1 void omap_set_dma_priority(int lch, int dst_port, int priority) { unsigned long reg; u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { switch (dst_port) { case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ reg = OMAP_TC_OCPT1_PRIOR; @@ -203,18 +202,22 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) l |= (priority & 0xf) << 8; omap_writel(l, reg); } +} +#endif - if (cpu_class_is_omap2()) { - u32 ccr; +#ifdef CONFIG_ARCH_OMAP2PLUS +void omap_set_dma_priority(int lch, int dst_port, int priority) +{ + u32 ccr; - ccr = p->dma_read(CCR, lch); - if (priority) - ccr |= (1 << 6); - else - ccr &= ~(1 << 6); - p->dma_write(ccr, CCR, lch); - } + ccr = p->dma_read(CCR, lch); + if (priority) + ccr |= (1 << 6); + else + ccr &= ~(1 << 6); + p->dma_write(ccr, CCR, lch); } +#endif EXPORT_SYMBOL(omap_set_dma_priority); void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, @@ -228,7 +231,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, l |= data_type; p->dma_write(l, CSDP, lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 ccr; ccr = p->dma_read(CCR, lch); @@ -244,7 +247,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, p->dma_write(ccr, CCR2, lch); } - if (cpu_class_is_omap2() && dma_trigger) { + if (dma_omap2plus() && dma_trigger) { u32 val; val = p->dma_read(CCR, lch); @@ -284,7 +287,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { BUG_ON(omap_dma_in_1510_mode()); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CCR2, lch); @@ -314,7 +317,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) p->dma_write(w, LCH_CTRL, lch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 val; val = p->dma_read(CCR, lch); @@ -342,7 +345,7 @@ EXPORT_SYMBOL(omap_set_dma_color_mode); void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 csdp; csdp = p->dma_read(CSDP, lch); @@ -355,7 +358,7 @@ EXPORT_SYMBOL(omap_set_dma_write_mode); void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) { - if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { + if (dma_omap1() && !dma_omap15xx()) { u32 l; l = p->dma_read(LCH_CTRL, lch); @@ -373,7 +376,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CSDP, lch); @@ -415,7 +418,7 @@ EXPORT_SYMBOL(omap_set_dma_params); void omap_set_dma_src_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CSEI, lch); @@ -447,13 +450,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x2; break; } @@ -463,7 +466,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) * fall through */ case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -487,7 +490,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { l = p->dma_read(CSDP, lch); l &= ~(0x1f << 9); l |= dest_port << 9; @@ -508,7 +511,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_params); void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CDEI, lch); @@ -540,19 +543,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x2; else burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -573,7 +576,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -587,7 +590,7 @@ static inline void omap_disable_channel_irq(int lch) /* disable channel interrupts */ p->dma_write(0, CICR, lch); /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -611,7 +614,7 @@ static inline void enable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); - if (cpu_class_is_omap1()) + if (dma_omap1()) l &= ~(1 << 14); /* Set the ENABLE_LNK bits */ @@ -619,7 +622,7 @@ static inline void enable_lnk(int lch) l = dma_chan[lch].next_lch | (1 << 15); #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) + if (dma_omap2plus()) if (dma_chan[lch].next_linked_ch != -1) l = dma_chan[lch].next_linked_ch | (1 << 15); #endif @@ -636,12 +639,12 @@ static inline void disable_lnk(int lch) /* Disable interrupts */ omap_disable_channel_irq(lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* Set the STOP_LNK bit */ l |= 1 << 14; } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -655,7 +658,7 @@ static inline void omap2_enable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -673,7 +676,7 @@ static inline void omap2_disable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -712,7 +715,7 @@ int omap_request_dma(int dev_id, const char *dev_name, if (p->clear_lch_regs) p->clear_lch_regs(free_ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(free_ch); spin_unlock_irqrestore(&dma_chan_lock, flags); @@ -723,7 +726,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { chan->chain_id = -1; chan->next_linked_ch = -1; } @@ -731,13 +734,13 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - if (cpu_class_is_omap1()) + if (dma_omap1()) chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; - else if (cpu_class_is_omap2()) + else if (dma_omap2plus()) chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | OMAP2_DMA_TRANS_ERR_IRQ; - if (cpu_is_omap16xx()) { + if (dma_omap16xx()) { /* If the sync device is set, configure it dynamically. */ if (dev_id != 0) { set_gdma_dev(free_ch + 1, dev_id); @@ -748,11 +751,11 @@ int omap_request_dma(int dev_id, const char *dev_name, * id. */ p->dma_write(dev_id | (1 << 10), CCR, free_ch); - } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { + } else if (dma_omap1()) { p->dma_write(dev_id, CCR, free_ch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { omap_enable_channel_irq(free_ch); omap2_enable_irq_lch(free_ch); } @@ -774,7 +777,7 @@ void omap_free_dma(int lch) } /* Disable interrupt for logical channel */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(lch); /* Disable all DMA interrupts for the channel. */ @@ -784,7 +787,7 @@ void omap_free_dma(int lch) p->dma_write(0, CCR, lch); /* Clear registers */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(lch); spin_lock_irqsave(&dma_chan_lock, flags); @@ -810,7 +813,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) { u32 reg; - if (!cpu_class_is_omap2()) { + if (dma_omap1()) { printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); return; } @@ -849,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio, } l = p->dma_read(CCR, lch); l &= ~((1 << 6) | (1 << 26)); - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); else l |= ((read_prio & 0x1) << 6); @@ -882,7 +885,7 @@ void omap_start_dma(int lch) * The CPC/CDAC register needs to be initialized to zero * before starting dma transfer. */ - if (cpu_is_omap15xx()) + if (dma_omap15xx()) p->dma_write(0, CPC, lch); else p->dma_write(0, CDAC, lch); @@ -1045,7 +1048,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CSAC, lch); @@ -1053,7 +1056,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) offset = p->dma_read(CSAC, lch); - if (!cpu_is_omap15xx()) { + if (!dma_omap15xx()) { /* * CDAC == 0 indicates that the DMA transfer on the channel has * not been started (no data has been transferred so far). @@ -1065,7 +1068,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = p->dma_read(CSSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); return offset; @@ -1084,7 +1087,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CDAC, lch); @@ -1093,7 +1096,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is * read before the DMA controller finished disabling the channel. */ - if (!cpu_is_omap15xx() && offset == 0) { + if (!dma_omap15xx() && offset == 0) { offset = p->dma_read(CDAC, lch); /* * CDAC == 0 indicates that the DMA transfer on the channel has @@ -1104,7 +1107,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = p->dma_read(CDSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); return offset; @@ -1121,7 +1124,7 @@ int omap_dma_running(void) { int lch; - if (cpu_class_is_omap1()) + if (dma_omap1()) if (omap_lcd_dma_running()) return 1; @@ -2024,7 +2027,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) dma_chan = d->chan; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { @@ -2036,7 +2039,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(ch); dma_chan[ch].dev_id = -1; @@ -2045,7 +2048,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) if (ch >= 6 && enable_1510_mode) continue; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* * request_irq() doesn't like dev_id (ie. ch) being * zero, so we have to kludge around this. @@ -2070,11 +2073,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); if (dma_irq < 0) { @@ -2089,9 +2092,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - /* reserve dma channels 0 and 1 in high security devices */ - if (cpu_is_omap34xx() && - (omap_type() != OMAP2_DEVICE_TYPE_GP)) { + /* reserve dma channels 0 and 1 in high security devices on 34xx */ + if (d->dev_caps & HS_CHANNELS_RESERVED) { pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); dma_chan[0].dev_id = 0; dma_chan[1].dev_id = 1; @@ -2118,7 +2120,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) { int dma_irq; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { char irq_name[4]; strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index b09e55632f4b..9dca23e4d6b0 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -44,9 +44,6 @@ #include <linux/of_device.h> #include <plat/dmtimer.h> -#include <plat/omap-pm.h> - -#include <mach/hardware.h> static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); @@ -332,7 +329,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer) EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); #if defined(CONFIG_ARCH_OMAP1) - +#include <mach/hardware.h> /** * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR * @inputmask: current value of idlect mask @@ -409,7 +406,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -438,9 +436,11 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); - if (!(timer->capability & OMAP_TIMER_ALWON)) - timer->ctx_loss_count = - omap_pm_get_dev_context_loss_count(&timer->pdev->dev); + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + } /* * Since the register values are computed and written within @@ -556,7 +556,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -798,6 +799,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) timer->id = pdev->id; timer->capability = pdata->timer_capability; timer->reserved = omap_dm_timer_reserved_systimer(timer->id); + timer->get_context_loss_count = pdata->get_context_loss_count; } timer->irq = irq->start; diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index bcbb9d5dc293..3a77b30f53d4 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -30,9 +30,69 @@ #include <linux/io.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach/map.h> +#include <plat/cpu.h> + +#ifdef CONFIG_OMAP2_VRFB + +/* + * The first memory resource is the register region for VRFB, + * the rest are VRFB virtual memory areas for each VRFB context. + */ + +static const struct resource omap2_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), +}; + +static const struct resource omap3_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), + DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"), + DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"), + DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"), + DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"), + DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"), + DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"), + DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"), + DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"), +}; + +static int __init omap_init_vrfb(void) +{ + struct platform_device *pdev; + const struct resource *res; + unsigned int num_res; + + if (cpu_is_omap24xx()) { + res = omap2_vrfb_resources; + num_res = ARRAY_SIZE(omap2_vrfb_resources); + } else if (cpu_is_omap34xx()) { + res = omap3_vrfb_resources; + num_res = ARRAY_SIZE(omap3_vrfb_resources); + } else { + return 0; + } + + pdev = platform_device_register_resndata(NULL, "omapvrfb", -1, + res, num_res, NULL, 0); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + else + return 0; +} + +arch_initcall(omap_init_vrfb); +#endif + #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static bool omapfb_lcd_configured; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a5683a84c6ee..f9df624d108c 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,160 +26,18 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c-omap.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> -#include <mach/irqs.h> #include <plat/i2c.h> -#include <plat/omap_device.h> -#define OMAP_I2C_SIZE 0x3f -#define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP1_INT_I2C (32 + 4) - -static const char name[] = "omap_i2c"; - -#define I2C_RESOURCE_BUILDER(base, irq) \ - { \ - .start = (base), \ - .end = (base) + OMAP_I2C_SIZE, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = (irq), \ - .flags = IORESOURCE_IRQ, \ - }, - -static struct resource i2c_resources[][2] = { - { I2C_RESOURCE_BUILDER(0, 0) }, -}; - -#define I2C_DEV_BUILDER(bus_id, res, data) \ - { \ - .id = (bus_id), \ - .name = name, \ - .num_resources = ARRAY_SIZE(res), \ - .resource = (res), \ - .dev = { \ - .platform_data = (data), \ - }, \ - } - -#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 #define OMAP_I2C_MAX_CONTROLLERS 4 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; -static struct platform_device omap_i2c_devices[] = { - I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]), -}; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static int __init omap_i2c_nr_ports(void) -{ - int ports = 0; - - if (cpu_class_is_omap1()) - ports = 1; - else if (cpu_is_omap24xx()) - ports = 2; - else if (cpu_is_omap34xx()) - ports = 3; - else if (cpu_is_omap44xx()) - ports = 4; - - return ports; -} - -static inline int omap1_i2c_add_bus(int bus_id) -{ - struct platform_device *pdev; - struct omap_i2c_bus_platform_data *pdata; - struct resource *res; - - omap1_i2c_mux_pins(bus_id); - - pdev = &omap_i2c_devices[bus_id - 1]; - res = pdev->resource; - res[0].start = OMAP1_I2C_BASE; - res[0].end = res[0].start + OMAP_I2C_SIZE; - res[1].start = OMAP1_INT_I2C; - pdata = &i2c_pdata[bus_id - 1]; - - /* all OMAP1 have IP version 1 register set */ - pdata->rev = OMAP_I2C_IP_VERSION_1; - - /* all OMAP1 I2C are implemented like this */ - pdata->flags = OMAP_I2C_FLAG_NO_FIFO | - OMAP_I2C_FLAG_SIMPLE_CLOCK | - OMAP_I2C_FLAG_16BIT_DATA_REG | - OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; - - /* how the cpu bus is wired up differs for 7xx only */ - - if (cpu_is_omap7xx()) - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; - else - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; - - return platform_device_register(pdev); -} - - -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline int omap2_i2c_add_bus(int bus_id) -{ - int l; - struct omap_hwmod *oh; - struct platform_device *pdev; - char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; - struct omap_i2c_bus_platform_data *pdata; - struct omap_i2c_dev_attr *dev_attr; - - omap2_i2c_mux_pins(bus_id); - - l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); - WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, - "String buffer overflow in I2C%d device setup\n", bus_id); - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -EEXIST; - } - - pdata = &i2c_pdata[bus_id - 1]; - /* - * pass the hwmod class's CPU-specific knowledge of I2C IP revision in - * use, and functionality implementation flags, up to the OMAP I2C - * driver via platform data - */ - pdata->rev = oh->class->rev; - - dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; - pdata->flags = dev_attr->flags; - - pdev = omap_device_build(name, bus_id, oh, pdata, - sizeof(struct omap_i2c_bus_platform_data), - NULL, 0, 0); - WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - - return PTR_RET(pdev); -} -#else -static inline int omap2_i2c_add_bus(int bus_id) -{ - return 0; -} -#endif - -static int __init omap_i2c_add_bus(int bus_id) -{ - if (cpu_class_is_omap1()) - return omap1_i2c_add_bus(bus_id); - else - return omap2_i2c_add_bus(bus_id); -} - /** * omap_i2c_bus_setup - Process command line options for the I2C bus speed * @str: String of options @@ -193,12 +51,11 @@ static int __init omap_i2c_add_bus(int bus_id) */ static int __init omap_i2c_bus_setup(char *str) { - int ports; int ints[3]; - ports = omap_i2c_nr_ports(); get_options(str, 3, ints); - if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports) + if (ints[0] < 2 || ints[1] < 1 || + ints[1] > OMAP_I2C_MAX_CONTROLLERS) return 0; i2c_pdata[ints[1] - 1].clkrate = ints[2]; i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP; @@ -218,7 +75,7 @@ static int __init omap_register_i2c_bus_cmdline(void) for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++) if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) { i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - err = omap_i2c_add_bus(i + 1); + err = omap_i2c_add_bus(&i2c_pdata[i], i + 1); if (err) goto out; } @@ -243,7 +100,7 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, { int err; - BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports()); + BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS); if (info) { err = i2c_register_board_info(bus_id, info, len); @@ -256,5 +113,5 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - return omap_i2c_add_bus(bus_id); + return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id); } diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h index 0a87b052f8f7..6f506ba9e453 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/dma.h + * OMAP DMA handling defines and function * * Copyright (C) 2003 Nokia Corporation * Author: Juha Yrjölä <juha.yrjola@nokia.com> @@ -23,187 +23,8 @@ #include <linux/platform_device.h> -/* - * TODO: These dma channel defines should go away once all - * the omap drivers hwmod adapted. - */ - -/* Move omap4 specific defines to dma-44xx.h */ -#include "dma-44xx.h" - #define INT_DMA_LCD 25 -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -/* DMA channels for 24xx */ -#define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ -#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ -#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ -#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ -#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ -#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ -#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ -#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ -#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ -#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ - -#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ -#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ - -/* Only for AM35xx */ -#define AM35XX_DMA_UART4_TX 54 -#define AM35XX_DMA_UART4_RX 55 - -/*----------------------------------------------------------------------------*/ - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) @@ -309,10 +130,12 @@ #define SRC_PORT BIT(0x7) #define DST_PORT BIT(0x8) #define SRC_INDEX BIT(0x9) -#define DST_INDEX BIT(0xA) -#define IS_BURST_ONLY4 BIT(0xB) -#define CLEAR_CSR_ON_READ BIT(0xC) -#define IS_WORD_16 BIT(0xD) +#define DST_INDEX BIT(0xa) +#define IS_BURST_ONLY4 BIT(0xb) +#define CLEAR_CSR_ON_READ BIT(0xc) +#define IS_WORD_16 BIT(0xd) +#define ENABLE_16XX_MODE BIT(0xe) +#define HS_CHANNELS_RESERVED BIT(0xf) /* Defines for DMA Capabilities */ #define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) @@ -449,7 +272,15 @@ struct omap_system_dma_plat_info { u32 (*dma_read)(int reg, int lch); }; -extern void __init omap_init_consistent_dma_size(void); +#ifdef CONFIG_ARCH_OMAP2PLUS +#define dma_omap2plus() 1 +#else +#define dma_omap2plus() 0 +#endif +#define dma_omap1() (!dma_omap2plus()) +#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) +#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) + extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h deleted file mode 100644 index 025d85a3ee86..000000000000 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * clkdev <-> OMAP integration - * - * Russell King <linux@arm.linux.org.uk> - * - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H - -#include <linux/clkdev.h> - -struct omap_clk { - u16 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) /* 7xx, 850 */ -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ -#define CK_242X (1 << 4) -#define CK_243X (1 << 5) /* 243x, 253x */ -#define CK_3430ES1 (1 << 6) /* 34xxES1 only */ -#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */ -#define CK_AM35XX (1 << 9) /* Sitara AM35xx */ -#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ -#define CK_443X (1 << 11) -#define CK_TI816X (1 << 12) -#define CK_446X (1 << 13) -#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */ -#define CK_1710 (1 << 15) /* 1710 extra for rate selection */ - - -#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) - - -#endif - diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h deleted file mode 100644 index e2e2d045e428..000000000000 --- a/arch/arm/plat-omap/include/plat/clock.h +++ /dev/null @@ -1,309 +0,0 @@ -/* - * OMAP clock: data structure definitions, function prototypes, shared macros - * - * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -#include <linux/list.h> - -struct module; -struct clk; -struct clockdomain; - -/* Temporary, needed during the common clock framework conversion */ -#define __clk_get_name(clk) (clk->name) -#define __clk_get_parent(clk) (clk->parent) -#define __clk_get_rate(clk) (clk->rate) - -/** - * struct clkops - some clock function pointers - * @enable: fn ptr that enables the current clock in hardware - * @disable: fn ptr that enables the current clock in hardware - * @find_idlest: function returning the IDLEST register for the clock's IP blk - * @find_companion: function returning the "companion" clk reg for the clock - * @allow_idle: fn ptr that enables autoidle for the current clock in hardware - * @deny_idle: fn ptr that disables autoidle for the current clock in hardware - * - * A "companion" clk is an accompanying clock to the one being queried - * that must be enabled for the IP module connected to the clock to - * become accessible by the hardware. Neither @find_idlest nor - * @find_companion should be needed; that information is IP - * block-specific; the hwmod code has been created to handle this, but - * until hwmod data is ready and drivers have been converted to use PM - * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and - * @find_companion must, unfortunately, remain. - */ -struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); - void (*find_idlest)(struct clk *, void __iomem **, - u8 *, u8 *); - void (*find_companion)(struct clk *, void __iomem **, - u8 *); - void (*allow_idle)(struct clk *); - void (*deny_idle)(struct clk *); -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -/* struct clksel_rate.flags possibilities */ -#define RATE_IN_242X (1 << 0) -#define RATE_IN_243X (1 << 1) -#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ -#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ -#define RATE_IN_36XX (1 << 4) -#define RATE_IN_4430 (1 << 5) -#define RATE_IN_TI816X (1 << 6) -#define RATE_IN_4460 (1 << 7) -#define RATE_IN_AM33XX (1 << 8) -#define RATE_IN_TI814X (1 << 9) - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) -#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) -#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) -#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) - -/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ -#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) - - -/** - * struct clksel_rate - register bitfield values corresponding to clk divisors - * @val: register bitfield value (shifted to bit 0) - * @div: clock divisor corresponding to @val - * @flags: (see "struct clksel_rate.flags possibilities" above) - * - * @val should match the value of a read from struct clk.clksel_reg - * AND'ed with struct clk.clksel_mask, shifted right to bit 0. - * - * @div is the divisor that should be applied to the parent clock's rate - * to produce the current clock's rate. - */ -struct clksel_rate { - u32 val; - u8 div; - u16 flags; -}; - -/** - * struct clksel - available parent clocks, and a pointer to their divisors - * @parent: struct clk * to a possible parent clock - * @rates: available divisors for this parent clock - * - * A struct clksel is always associated with one or more struct clks - * and one or more struct clksel_rates. - */ -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - -/** - * struct dpll_data - DPLL registers and integration data - * @mult_div1_reg: register containing the DPLL M and N bitfields - * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg - * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg - * @clk_bypass: struct clk pointer to the clock's bypass clock input - * @clk_ref: struct clk pointer to the clock's reference clock input - * @control_reg: register containing the DPLL mode bitfield - * @enable_mask: mask of the DPLL mode bitfield in @control_reg - * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() - * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() - * @max_multiplier: maximum valid non-bypass multiplier value (actual) - * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() - * @min_divider: minimum valid non-bypass divider value (actual) - * @max_divider: maximum valid non-bypass divider value (actual) - * @modes: possible values of @enable_mask - * @autoidle_reg: register containing the DPLL autoidle mode bitfield - * @idlest_reg: register containing the DPLL idle status bitfield - * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg - * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg - * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg - * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg - * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs - * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs - * @flags: DPLL type/features (see below) - * - * Possible values for @flags: - * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) - * - * @freqsel_mask is only used on the OMAP34xx family and AM35xx. - * - * XXX Some DPLLs have multiple bypass inputs, so it's not technically - * correct to only have one @clk_bypass pointer. - * - * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, - * @last_rounded_n) should be separated from the runtime-fixed fields - * and placed into a different structure, so that the runtime-fixed data - * can be placed into read-only space. - */ -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - struct clk *clk_bypass; - struct clk *clk_ref; - void __iomem *control_reg; - u32 enable_mask; - unsigned long last_rounded_rate; - u16 last_rounded_m; - u16 max_multiplier; - u8 last_rounded_n; - u8 min_divider; - u16 max_divider; - u8 modes; - void __iomem *autoidle_reg; - void __iomem *idlest_reg; - u32 autoidle_mask; - u32 freqsel_mask; - u32 idlest_mask; - u32 dco_mask; - u32 sddiv_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; - u8 flags; -}; - -#endif - -/* - * struct clk.flags possibilities - * - * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. - */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) - -/** - * struct clk - OMAP struct clk - * @node: list_head connecting this clock into the full clock list - * @ops: struct clkops * for this clock - * @name: the name of the clock in the hardware (used in hwmod data and debug) - * @parent: pointer to this clock's parent struct clk - * @children: list_head connecting to the child clks' @sibling list_heads - * @sibling: list_head connecting this clk to its parent clk's @children - * @rate: current clock rate - * @enable_reg: register to write to enable the clock (see @enable_bit) - * @recalc: fn ptr that returns the clock's current rate - * @set_rate: fn ptr that can change the clock's current rate - * @round_rate: fn ptr that can round the clock's current rate - * @init: fn ptr to do clock-specific initialization - * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @usecount: number of users that have requested this clock to be enabled - * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div - * @flags: see "struct clk.flags possibilities" above - * @clksel_reg: for clksel clks, register va containing src/divisor select - * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector - * @clksel: for clksel clks, pointer to struct clksel for this clock - * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock - * @clkdm_name: clockdomain name that this clock is contained in - * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime - * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - * XXX @usecount is poorly named. It should be "enable_count" or - * something similar. "users" in the description refers to kernel - * code (core code or drivers) that have called clk_enable() and not - * yet called clk_disable(); the usecount of parent clocks is also - * incremented by the clock code when clk_enable() is called on child - * clocks and decremented by the clock code when clk_disable() is - * called on child clocks. - * - * XXX @clkdm, @usecount, @children, @sibling should be marked for - * internal use only. - * - * @children and @sibling are used to optimize parent-to-child clock - * tree traversals. (child-to-parent traversals use @parent.) - * - * XXX The notion of the clock's current rate probably needs to be - * separated from the clock's target rate. - */ -struct clk { - struct list_head node; - const struct clkops *ops; - const char *name; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ - unsigned long rate; - void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - u8 enable_bit; - s8 usecount; - u8 fixed_div; - u8 flags; -#ifdef CONFIG_ARCH_OMAP2PLUS - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; - const char *clkdm_name; - struct clockdomain *clkdm; -#else - u8 rate_offset; - u8 src_offset; -#endif -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -}; - -extern int mpurate; - -extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_reparent(struct clk *child, struct clk *parent); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern unsigned long followparent_recalc(struct clk *clk); -extern void clk_enable_init_clocks(void); -unsigned long omap_fixed_divisor_recalc(struct clk *clk); -extern struct clk *omap_clk_get_by_name(const char *name); -extern int omap_clk_enable_autoidle_all(void); -extern int omap_clk_disable_autoidle_all(void); - -extern const struct clkops clkops_null; - -extern struct clk dummy_ck; - -#endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h deleted file mode 100644 index d1cb6f527b7e..000000000000 --- a/arch/arm/plat-omap/include/plat/common.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/common.h - * - * Header for code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -#include <plat/i2c.h> -#include <plat/omap_hwmod.h> - -extern int __init omap_init_clocksource_32k(void __iomem *vbase); - -extern void __init omap_check_revision(void); - -extern void omap_reserve(void); -extern int omap_dss_reset(struct omap_hwmod *); - -void omap_sram_init(void); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h new file mode 100644 index 000000000000..da000d482ff2 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/counter-32k.h @@ -0,0 +1 @@ +int omap_init_clocksource_32k(void __iomem *vbase); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 67da857783ce..b4516aba67ed 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/cpu.h - * * OMAP cpu type detection * * Copyright (C) 2004, 2008 Nokia Corporation @@ -30,470 +28,12 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H -#ifndef __ASSEMBLY__ - -#include <linux/bitops.h> -#include <plat/multi.h> - -/* - * Omap device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - -int omap_type(void); - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Get the CPU revision for OMAP devices - */ -#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - * cpu_is_omap443x(): True for OMAP4430 - * cpu_is_omap446x(): True for OMAP4460 - * cpu_is_omap447x(): True for OMAP4470 - * soc_is_omap543x(): True for OMAP5430, OMAP5432 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_AM_CLASS(class, id) \ -static inline int is_am ##class (void) \ -{ \ - return (GET_AM_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_TI_CLASS(class, id) \ -static inline int is_ti ##class (void) \ -{ \ - return (GET_TI_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_TI_SUBCLASS(subclass, id) \ -static inline int is_ti ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_AM_SUBCLASS(subclass, id) \ -static inline int is_am ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) -IS_OMAP_CLASS(24xx, 0x24) -IS_OMAP_CLASS(34xx, 0x34) -IS_OMAP_CLASS(44xx, 0x44) -IS_AM_CLASS(35xx, 0x35) -IS_OMAP_CLASS(54xx, 0x54) -IS_AM_CLASS(33xx, 0x33) - -IS_TI_CLASS(81xx, 0x81) - -IS_OMAP_SUBCLASS(242x, 0x242) -IS_OMAP_SUBCLASS(243x, 0x243) -IS_OMAP_SUBCLASS(343x, 0x343) -IS_OMAP_SUBCLASS(363x, 0x363) -IS_OMAP_SUBCLASS(443x, 0x443) -IS_OMAP_SUBCLASS(446x, 0x446) -IS_OMAP_SUBCLASS(447x, 0x447) -IS_OMAP_SUBCLASS(543x, 0x543) - -IS_TI_SUBCLASS(816x, 0x816) -IS_TI_SUBCLASS(814x, 0x814) -IS_AM_SUBCLASS(335x, 0x335) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 -#define cpu_is_ti81xx() 0 -#define cpu_is_ti816x() 0 -#define cpu_is_ti814x() 0 -#define soc_is_am35xx() 0 -#define soc_is_am33xx() 0 -#define soc_is_am335x() 0 -#define cpu_is_omap44xx() 0 -#define cpu_is_omap443x() 0 -#define cpu_is_omap446x() 0 -#define cpu_is_omap447x() 0 -#define soc_is_omap54xx() 0 -#define soc_is_omap543x() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -#if defined(MULTI_OMAP2) -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() is_omap24xx() -# endif -# if defined (CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() is_omap242x() -# endif -# if defined (CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() is_omap243x() -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() -# endif -#else -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 -# endif -# if defined(CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap310(): True for OMAP310 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) -IS_OMAP_TYPE(2420, 0x2420) -IS_OMAP_TYPE(2422, 0x2422) -IS_OMAP_TYPE(2423, 0x2423) -IS_OMAP_TYPE(2430, 0x2430) -IS_OMAP_TYPE(3430, 0x3430) - -#define cpu_is_omap310() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 -#define cpu_is_omap3630() 0 -#define soc_is_omap5430() 0 - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 310 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() -#endif - -#if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap3430 -# undef cpu_is_ti81xx -# undef cpu_is_ti816x -# undef cpu_is_ti814x -# undef soc_is_am35xx -# define cpu_is_omap3430() is_omap3430() -# undef cpu_is_omap3630 -# define cpu_is_omap3630() is_omap363x() -# define cpu_is_ti81xx() is_ti81xx() -# define cpu_is_ti816x() is_ti816x() -# define cpu_is_ti814x() is_ti814x() -# define soc_is_am35xx() is_am35xx() +#ifdef CONFIG_ARCH_OMAP1 +#include <mach/soc.h> #endif -# if defined(CONFIG_SOC_AM33XX) -# undef soc_is_am33xx -# undef soc_is_am335x -# define soc_is_am33xx() is_am33xx() -# define soc_is_am335x() is_am335x() +#ifdef CONFIG_ARCH_OMAP2PLUS +#include "../../mach-omap2/soc.h" #endif -# if defined(CONFIG_ARCH_OMAP4) -# undef cpu_is_omap44xx -# undef cpu_is_omap443x -# undef cpu_is_omap446x -# undef cpu_is_omap447x -# define cpu_is_omap44xx() is_omap44xx() -# define cpu_is_omap443x() is_omap443x() -# define cpu_is_omap446x() is_omap446x() -# define cpu_is_omap447x() is_omap447x() -# endif - -# if defined(CONFIG_SOC_OMAP5) -# undef soc_is_omap54xx -# undef soc_is_omap543x -# define soc_is_omap54xx() is_omap54xx() -# define soc_is_omap543x() is_omap543x() -#endif - -/* Macros to detect if we have OMAP1 or OMAP2 */ -#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ - cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx() || \ - soc_is_am33xx()) - -/* Various silicon revisions for omap2 */ -#define OMAP242X_CLASS 0x24200024 -#define OMAP2420_REV_ES1_0 OMAP242X_CLASS -#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) - -#define OMAP243X_CLASS 0x24300024 -#define OMAP2430_REV_ES1_0 OMAP243X_CLASS - -#define OMAP343X_CLASS 0x34300034 -#define OMAP3430_REV_ES1_0 OMAP343X_CLASS -#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) -#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) -#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) -#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) -#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) - -#define OMAP363X_CLASS 0x36300034 -#define OMAP3630_REV_ES1_0 OMAP363X_CLASS -#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) -#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) - -#define TI816X_CLASS 0x81600034 -#define TI8168_REV_ES1_0 TI816X_CLASS -#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) - -#define TI814X_CLASS 0x81400034 -#define TI8148_REV_ES1_0 TI814X_CLASS -#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) -#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) - -#define AM35XX_CLASS 0x35170034 -#define AM35XX_REV_ES1_0 AM35XX_CLASS -#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) - -#define AM335X_CLASS 0x33500033 -#define AM335X_REV_ES1_0 AM335X_CLASS - -#define OMAP443X_CLASS 0x44300044 -#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) -#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) -#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) -#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) -#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) - -#define OMAP446X_CLASS 0x44600044 -#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) -#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8)) - -#define OMAP447X_CLASS 0x44700044 -#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) - -#define OMAP54XX_CLASS 0x54000054 -#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) -#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) - -void omap2xxx_check_revision(void); -void omap3xxx_check_revision(void); -void omap4xxx_check_revision(void); -void omap5xxx_check_revision(void); -void omap3xxx_check_features(void); -void ti81xx_check_features(void); -void omap4xxx_check_features(void); - -/* - * Runtime detection of OMAP3 features - * - * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip - * family have OS-level control over the I/O chain clock. This is - * to avoid a window during which wakeups could potentially be lost - * during powerdomain transitions. If this bit is set, it - * indicates that the chip does support OS-level control of this - * feature. - */ -extern u32 omap_features; - -#define OMAP3_HAS_L2CACHE BIT(0) -#define OMAP3_HAS_IVA BIT(1) -#define OMAP3_HAS_SGX BIT(2) -#define OMAP3_HAS_NEON BIT(3) -#define OMAP3_HAS_ISP BIT(4) -#define OMAP3_HAS_192MHZ_CLK BIT(5) -#define OMAP3_HAS_IO_WAKEUP BIT(6) -#define OMAP3_HAS_SDRC BIT(7) -#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) -#define OMAP4_HAS_MPU_1GHZ BIT(9) -#define OMAP4_HAS_MPU_1_2GHZ BIT(10) -#define OMAP4_HAS_MPU_1_5GHZ BIT(11) - - -#define OMAP3_HAS_FEATURE(feat,flag) \ -static inline unsigned int omap3_has_ ##feat(void) \ -{ \ - return omap_features & OMAP3_HAS_ ##flag; \ -} \ - -OMAP3_HAS_FEATURE(l2cache, L2CACHE) -OMAP3_HAS_FEATURE(sgx, SGX) -OMAP3_HAS_FEATURE(iva, IVA) -OMAP3_HAS_FEATURE(neon, NEON) -OMAP3_HAS_FEATURE(isp, ISP) -OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) -OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) -OMAP3_HAS_FEATURE(sdrc, SDRC) -OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) - -/* - * Runtime detection of OMAP4 features - */ -#define OMAP4_HAS_FEATURE(feat, flag) \ -static inline unsigned int omap4_has_ ##feat(void) \ -{ \ - return omap_features & OMAP4_HAS_ ##flag; \ -} \ - -OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) -OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) -OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) - -#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h new file mode 100644 index 000000000000..8fc4287222dd --- /dev/null +++ b/arch/arm/plat-omap/include/plat/debug-devices.h @@ -0,0 +1,2 @@ +/* for TI reference platforms sharing the same debug card */ +extern int debug_card_init(u32 addr, unsigned gpio); diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h deleted file mode 100644 index 1f767cb2f38a..000000000000 --- a/arch/arm/plat-omap/include/plat/dma-44xx.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * OMAP4 SDMA channel definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * Paul Walmsley (paul@pwsan.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H - -#define OMAP44XX_DMA_SYS_REQ0 2 -#define OMAP44XX_DMA_SYS_REQ1 3 -#define OMAP44XX_DMA_GPMC 4 -#define OMAP44XX_DMA_DSS_DISPC_REQ 6 -#define OMAP44XX_DMA_SYS_REQ2 7 -#define OMAP44XX_DMA_MCASP1_AXEVT 8 -#define OMAP44XX_DMA_ISS_REQ1 9 -#define OMAP44XX_DMA_ISS_REQ2 10 -#define OMAP44XX_DMA_MCASP1_AREVT 11 -#define OMAP44XX_DMA_ISS_REQ3 12 -#define OMAP44XX_DMA_ISS_REQ4 13 -#define OMAP44XX_DMA_DSS_RFBI_REQ 14 -#define OMAP44XX_DMA_SPI3_TX0 15 -#define OMAP44XX_DMA_SPI3_RX0 16 -#define OMAP44XX_DMA_MCBSP2_TX 17 -#define OMAP44XX_DMA_MCBSP2_RX 18 -#define OMAP44XX_DMA_MCBSP3_TX 19 -#define OMAP44XX_DMA_MCBSP3_RX 20 -#define OMAP44XX_DMA_C2C_SSCM_GPO0 21 -#define OMAP44XX_DMA_C2C_SSCM_GPO1 22 -#define OMAP44XX_DMA_SPI3_TX1 23 -#define OMAP44XX_DMA_SPI3_RX1 24 -#define OMAP44XX_DMA_I2C3_TX 25 -#define OMAP44XX_DMA_I2C3_RX 26 -#define OMAP44XX_DMA_I2C1_TX 27 -#define OMAP44XX_DMA_I2C1_RX 28 -#define OMAP44XX_DMA_I2C2_TX 29 -#define OMAP44XX_DMA_I2C2_RX 30 -#define OMAP44XX_DMA_MCBSP4_TX 31 -#define OMAP44XX_DMA_MCBSP4_RX 32 -#define OMAP44XX_DMA_MCBSP1_TX 33 -#define OMAP44XX_DMA_MCBSP1_RX 34 -#define OMAP44XX_DMA_SPI1_TX0 35 -#define OMAP44XX_DMA_SPI1_RX0 36 -#define OMAP44XX_DMA_SPI1_TX1 37 -#define OMAP44XX_DMA_SPI1_RX1 38 -#define OMAP44XX_DMA_SPI1_TX2 39 -#define OMAP44XX_DMA_SPI1_RX2 40 -#define OMAP44XX_DMA_SPI1_TX3 41 -#define OMAP44XX_DMA_SPI1_RX3 42 -#define OMAP44XX_DMA_SPI2_TX0 43 -#define OMAP44XX_DMA_SPI2_RX0 44 -#define OMAP44XX_DMA_SPI2_TX1 45 -#define OMAP44XX_DMA_SPI2_RX1 46 -#define OMAP44XX_DMA_MMC2_TX 47 -#define OMAP44XX_DMA_MMC2_RX 48 -#define OMAP44XX_DMA_UART1_TX 49 -#define OMAP44XX_DMA_UART1_RX 50 -#define OMAP44XX_DMA_UART2_TX 51 -#define OMAP44XX_DMA_UART2_RX 52 -#define OMAP44XX_DMA_UART3_TX 53 -#define OMAP44XX_DMA_UART3_RX 54 -#define OMAP44XX_DMA_UART4_TX 55 -#define OMAP44XX_DMA_UART4_RX 56 -#define OMAP44XX_DMA_MMC4_TX 57 -#define OMAP44XX_DMA_MMC4_RX 58 -#define OMAP44XX_DMA_MMC5_TX 59 -#define OMAP44XX_DMA_MMC5_RX 60 -#define OMAP44XX_DMA_MMC1_TX 61 -#define OMAP44XX_DMA_MMC1_RX 62 -#define OMAP44XX_DMA_SYS_REQ3 64 -#define OMAP44XX_DMA_MCPDM_UP 65 -#define OMAP44XX_DMA_MCPDM_DL 66 -#define OMAP44XX_DMA_DMIC_REQ 67 -#define OMAP44XX_DMA_C2C_SSCM_GPO2 68 -#define OMAP44XX_DMA_C2C_SSCM_GPO3 69 -#define OMAP44XX_DMA_SPI4_TX0 70 -#define OMAP44XX_DMA_SPI4_RX0 71 -#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 -#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 -#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 -#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 -#define OMAP44XX_DMA_DSS_HDMI_REQ 76 -#define OMAP44XX_DMA_MMC3_TX 77 -#define OMAP44XX_DMA_MMC3_RX 78 -#define OMAP44XX_DMA_USIM_TX 79 -#define OMAP44XX_DMA_USIM_RX 80 -#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 -#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 -#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 -#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 -#define OMAP44XX_DMA_SLIMBUS1_TX0 85 -#define OMAP44XX_DMA_SLIMBUS1_TX1 86 -#define OMAP44XX_DMA_SLIMBUS1_TX2 87 -#define OMAP44XX_DMA_SLIMBUS1_TX3 88 -#define OMAP44XX_DMA_SLIMBUS1_RX0 89 -#define OMAP44XX_DMA_SLIMBUS1_RX1 90 -#define OMAP44XX_DMA_SLIMBUS1_RX2 91 -#define OMAP44XX_DMA_SLIMBUS1_RX3 92 -#define OMAP44XX_DMA_SLIMBUS2_TX0 93 -#define OMAP44XX_DMA_SLIMBUS2_TX1 94 -#define OMAP44XX_DMA_SLIMBUS2_TX2 95 -#define OMAP44XX_DMA_SLIMBUS2_TX3 96 -#define OMAP44XX_DMA_SLIMBUS2_RX0 97 -#define OMAP44XX_DMA_SLIMBUS2_RX1 98 -#define OMAP44XX_DMA_SLIMBUS2_RX2 99 -#define OMAP44XX_DMA_SLIMBUS2_RX3 100 -#define OMAP44XX_DMA_ABE_REQ_0 101 -#define OMAP44XX_DMA_ABE_REQ_1 102 -#define OMAP44XX_DMA_ABE_REQ_2 103 -#define OMAP44XX_DMA_ABE_REQ_3 104 -#define OMAP44XX_DMA_ABE_REQ_4 105 -#define OMAP44XX_DMA_ABE_REQ_5 106 -#define OMAP44XX_DMA_ABE_REQ_6 107 -#define OMAP44XX_DMA_ABE_REQ_7 108 -#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109 -#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110 -#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111 -#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112 -#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113 -#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114 -#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115 -#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116 -#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117 -#define OMAP44XX_DMA_SHA2_CTXIN_P 118 -#define OMAP44XX_DMA_SHA2_DIN_P 119 -#define OMAP44XX_DMA_SHA2_CTXOUT_P 120 -#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121 -#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122 -#define OMAP44XX_DMA_I2C4_TX 124 -#define OMAP44XX_DMA_I2C4_RX 125 - -#endif diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 348f855d3dab..f8943c8f9dbf 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -94,6 +94,7 @@ struct dmtimer_platform_data { /* set_timer_src - Only used for OMAP1 devices */ int (*set_timer_src)(struct platform_device *pdev, int source); u32 timer_capability; + int (*get_context_loss_count)(struct device *); }; int omap_dm_timer_reserve_systimer(int id); @@ -264,6 +265,7 @@ struct omap_dm_timer { unsigned reserved:1; unsigned posted:1; struct timer_regs context; + int (*get_context_loss_count)(struct device *); int ctx_loss_count; int revision; u32 capability; diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h deleted file mode 100644 index bd3c6324ae1f..000000000000 --- a/arch/arm/plat-omap/include/plat/fpga.h +++ /dev/null @@ -1,193 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/fpga.h - * - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -extern void omap1510_fpga_init_irq(void); - -#define fpga_read(reg) __raw_readb(reg) -#define fpga_write(val, reg) __raw_writeb(val, reg) - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* PA */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) - -#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) -#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) -#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h deleted file mode 100644 index 2e6e2597178c..000000000000 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * General-Purpose Memory Controller for OMAP2 - * - * Copyright (C) 2005-2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_GPMC_H -#define __OMAP2_GPMC_H - -/* Maximum Number of Chip Selects */ -#define GPMC_CS_NUM 8 - -#define GPMC_CS_CONFIG1 0x00 -#define GPMC_CS_CONFIG2 0x04 -#define GPMC_CS_CONFIG3 0x08 -#define GPMC_CS_CONFIG4 0x0c -#define GPMC_CS_CONFIG5 0x10 -#define GPMC_CS_CONFIG6 0x14 -#define GPMC_CS_CONFIG7 0x18 -#define GPMC_CS_NAND_COMMAND 0x1c -#define GPMC_CS_NAND_ADDRESS 0x20 -#define GPMC_CS_NAND_DATA 0x24 - -/* Control Commands */ -#define GPMC_CONFIG_RDY_BSY 0x00000001 -#define GPMC_CONFIG_DEV_SIZE 0x00000002 -#define GPMC_CONFIG_DEV_TYPE 0x00000003 -#define GPMC_SET_IRQ_STATUS 0x00000004 -#define GPMC_CONFIG_WP 0x00000005 - -#define GPMC_GET_IRQ_STATUS 0x00000006 -#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */ -#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/ -#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */ - -#define GPMC_NAND_COMMAND 0x0000000a -#define GPMC_NAND_ADDRESS 0x0000000b -#define GPMC_NAND_DATA 0x0000000c - -#define GPMC_ENABLE_IRQ 0x0000000d - -/* ECC commands */ -#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */ -#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */ -#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */ - -#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) -#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) -#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) -#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) -#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) -#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) -#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) -#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) -#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) -#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) -#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) -#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) -#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) -#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) -#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) -#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) -#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_MUXADDDATA (1 << 9) -#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) -#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) -#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) -#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) -#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) -#define GPMC_CONFIG7_CSVALID (1 << 6) - -#define GPMC_DEVICETYPE_NOR 0 -#define GPMC_DEVICETYPE_NAND 2 -#define GPMC_CONFIG_WRITEPROTECT 0x00000010 -#define GPMC_STATUS_BUFF_EMPTY 0x00000001 -#define WR_RD_PIN_MONITORING 0x00600000 -#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) -#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) -#define GPMC_IRQ_FIFOEVENTENABLE 0x01 -#define GPMC_IRQ_COUNT_EVENT 0x02 - -#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 -#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) - -enum omap_ecc { - /* 1-bit ecc: stored at end of spare area */ - OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ - OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at beginning of spare area as romcode */ - OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ - OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ - OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ -}; - -/* - * Note that all values in this struct are in nanoseconds except sync_clk - * (which is in picoseconds), while the register values are in gpmc_fck cycles. - */ -struct gpmc_timings { - /* Minimum clock period for synchronous mode (in picoseconds) */ - u32 sync_clk; - - /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ - u16 cs_on; /* Assertion time */ - u16 cs_rd_off; /* Read deassertion time */ - u16 cs_wr_off; /* Write deassertion time */ - - /* ADV signal timings corresponding to GPMC_CONFIG3 */ - u16 adv_on; /* Assertion time */ - u16 adv_rd_off; /* Read deassertion time */ - u16 adv_wr_off; /* Write deassertion time */ - - /* WE signals timings corresponding to GPMC_CONFIG4 */ - u16 we_on; /* WE assertion time */ - u16 we_off; /* WE deassertion time */ - - /* OE signals timings corresponding to GPMC_CONFIG4 */ - u16 oe_on; /* OE assertion time */ - u16 oe_off; /* OE deassertion time */ - - /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ - u16 page_burst_access; /* Multiple access word delay */ - u16 access; /* Start-cycle to first data valid delay */ - u16 rd_cycle; /* Total read cycle time */ - u16 wr_cycle; /* Total write cycle time */ - - /* The following are only on OMAP3430 */ - u16 wr_access; /* WRACCESSTIME */ - u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ -}; - -struct gpmc_nand_regs { - void __iomem *gpmc_status; - void __iomem *gpmc_nand_command; - void __iomem *gpmc_nand_address; - void __iomem *gpmc_nand_data; - void __iomem *gpmc_prefetch_config1; - void __iomem *gpmc_prefetch_config2; - void __iomem *gpmc_prefetch_control; - void __iomem *gpmc_prefetch_status; - void __iomem *gpmc_ecc_config; - void __iomem *gpmc_ecc_control; - void __iomem *gpmc_ecc_size_config; - void __iomem *gpmc_ecc1_result; - void __iomem *gpmc_bch_result0; -}; - -extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); -extern int gpmc_get_client_irq(unsigned irq_config); - -extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); -extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); -extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); -extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); -extern unsigned long gpmc_get_fclk_period(void); - -extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); -extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); -extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); -extern void gpmc_cs_free(int cs); -extern int gpmc_cs_set_reserved(int cs, int reserved); -extern int gpmc_cs_reserved(int cs); -extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write); -extern int gpmc_prefetch_reset(int cs); -extern void omap3_gpmc_save_context(void); -extern void omap3_gpmc_restore_context(void); -extern int gpmc_read_status(int cmd); -extern int gpmc_cs_configure(int cs, int cmd, int wval); -extern int gpmc_nand_read(int cs, int cmd); -extern int gpmc_nand_write(int cs, int cmd, int wval); - -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); - -#ifdef CONFIG_ARCH_OMAP3 -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors); -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors); -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc); -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc); -#endif /* CONFIG_ARCH_OMAP3 */ - -#endif diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 7c22b9e10dc3..7a9028cb5a75 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -18,11 +18,15 @@ * 02110-1301 USA * */ -#ifndef __ASM__ARCH_OMAP_I2C_H -#define __ASM__ARCH_OMAP_I2C_H -#include <linux/i2c.h> -#include <linux/i2c-omap.h> +#ifndef __PLAT_OMAP_I2C_H +#define __PLAT_OMAP_I2C_H + +struct i2c_board_info; +struct omap_i2c_bus_platform_data; + +int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, + int bus_id); #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, @@ -37,23 +41,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, } #endif -/** - * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod - * @fifo_depth: total controller FIFO size (in bytes) - * @flags: differences in hardware support capability - * - * @fifo_depth represents what exists on the hardware, not what is - * actually configured at runtime by the device driver. - */ -struct omap_i2c_dev_attr { - u8 fifo_depth; - u32 flags; -}; - -void __init omap1_i2c_mux_pins(int bus_id); -void __init omap2_i2c_mux_pins(int bus_id); - struct omap_hwmod; int omap_i2c_reset(struct omap_hwmod *oh); -#endif /* __ASM__ARCH_OMAP_I2C_H */ +#endif /* __PLAT_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/led.h b/arch/arm/plat-omap/include/plat/led.h deleted file mode 100644 index 25e451e7e2fd..000000000000 --- a/arch/arm/plat-omap/include/plat/led.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/led.h - * - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h deleted file mode 100644 index 4a970ec62dd1..000000000000 --- a/arch/arm/plat-omap/include/plat/menelaus.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/menelaus.h - * - * Functions to access Menelaus power management chip - */ - -#ifndef __ASM_ARCH_MENELAUS_H -#define __ASM_ARCH_MENELAUS_H - -struct device; - -struct menelaus_platform_data { - int (* late_init)(struct device *dev); -}; - -extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), - void *data); -extern void menelaus_unregister_mmc_callback(void); -extern int menelaus_set_mmc_opendrain(int slot, int enable); -extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); - -extern int menelaus_set_vmem(unsigned int mV); -extern int menelaus_set_vio(unsigned int mV); -extern int menelaus_set_vmmc(unsigned int mV); -extern int menelaus_set_vaux(unsigned int mV); -extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); -extern int menelaus_set_slot_sel(int enable); -extern int menelaus_get_slot_pin_states(void); -extern int menelaus_set_vcore_sw(unsigned int mV); -extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); - -#define EN_VPLL_SLEEP (1 << 7) -#define EN_VMMC_SLEEP (1 << 6) -#define EN_VAUX_SLEEP (1 << 5) -#define EN_VIO_SLEEP (1 << 4) -#define EN_VMEM_SLEEP (1 << 3) -#define EN_DC3_SLEEP (1 << 2) -#define EN_DC2_SLEEP (1 << 1) -#define EN_VC_SLEEP (1 << 0) - -extern int menelaus_set_regulator_sleep(int enable, u32 val); - -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS) -#define omap_has_menelaus() 1 -#else -#define omap_has_menelaus() 0 -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h deleted file mode 100644 index 8b4e4f2da2f5..000000000000 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * MMC definitions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_MMC_H -#define __OMAP2_MMC_H - -#include <linux/types.h> -#include <linux/device.h> -#include <linux/mmc/host.h> - -#include <plat/omap_hwmod.h> - -#define OMAP15XX_NR_MMC 1 -#define OMAP16XX_NR_MMC 2 -#define OMAP1_MMC_SIZE 0x080 -#define OMAP1_MMC1_BASE 0xfffb7800 -#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -#define OMAP24XX_NR_MMC 2 -#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE -#define OMAP2_MMC1_BASE 0x4809c000 - -#define OMAP4_MMC_REG_OFFSET 0x100 - -#define OMAP_MMC_MAX_SLOTS 2 - -/* - * struct omap_mmc_dev_attr.flags possibilities - * - * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can - * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag - * should be set if this is the case. See for example Section 22.5.3 - * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia - * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). - * - * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers - * don't work correctly on some MMC controller instances on some - * OMAP3 SoCs; this flag should be set if this is the case. See - * for example Advisory 2.1.1.128 "MMC: Multiple Block Read - * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ - * Revision F (October 2010) (SPRZ278F). - */ -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) -#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) - -struct omap_mmc_dev_attr { - u8 flags; -}; - -struct omap_mmc_platform_data { - /* back-link to device */ - struct device *dev; - - /* number of slots per controller */ - unsigned nr_slots:2; - - /* set if your board has components or wiring that limits the - * maximum frequency on the MMC bus */ - unsigned int max_freq; - - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); - /* initialize board-specific MMC functionality, can be NULL if - * not supported */ - int (*init)(struct device *dev); - void (*cleanup)(struct device *dev); - void (*shutdown)(struct device *dev); - - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); - - /* Integrating attributes from the omap_hwmod layer */ - u8 controller_flags; - - /* Register offset deviation */ - u16 reg_offset; - - struct omap_mmc_slot_data { - - /* - * 4/8 wires and any additional host capabilities - * need to OR'd all capabilities (ref. linux/mmc/host.h) - */ - u8 wires; /* Used for the MMC driver on omap1 and 2420 */ - u32 caps; /* Used for the MMC driver on 2430 and later */ - u32 pm_caps; /* PM capabilities of the mmc */ - - /* - * nomux means "standard" muxing is wrong on this board, and - * that board-specific code handled it before common init logic. - */ - unsigned nomux:1; - - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - - /* use the internal clock */ - unsigned internal_clock:1; - - /* nonremovable e.g. eMMC */ - unsigned nonremovable:1; - - /* Try to sleep or power off when possible */ - unsigned power_saving:1; - - /* If using power_saving and the MMC power is not to go off */ - unsigned no_off:1; - - /* eMMC does not handle power off when not in sleep state */ - unsigned no_regulator_off_init:1; - - /* Regulator off remapped to sleep */ - unsigned vcc_aux_disable_is_sleep:1; - - /* we can put the features above into this variable */ -#define HSMMC_HAS_PBIAS (1 << 0) -#define HSMMC_HAS_UPDATED_RESET (1 << 1) - unsigned features; - - int switch_pin; /* gpio (card detect) */ - int gpio_wp; /* gpio (write protect) */ - - int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); - int (*set_power)(struct device *dev, int slot, - int power_on, int vdd); - int (*get_ro)(struct device *dev, int slot); - void (*remux)(struct device *dev, int slot, int power_on); - /* Call back before enabling / disabling regulators */ - void (*before_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* Call back after enabling / disabling regulators */ - void (*after_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* if we have special card, init it using this callback */ - void (*init_card)(struct mmc_card *card); - - /* return MMC cover switch state, can be NULL if not supported. - * - * possible return values: - * 0 - closed - * 1 - open - */ - int (*get_cover_state)(struct device *dev, int slot); - - const char *name; - u32 ocr_mask; - - /* Card detection IRQs */ - int card_detect_irq; - int (*card_detect)(struct device *dev, int slot); - - unsigned int ban_openended:1; - - } slots[OMAP_MMC_MAX_SLOTS]; -}; - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, - int is_closed); - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); -void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -#else -static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} -static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ -} -#endif - -extern int omap_msdi_reset(struct omap_hwmod *oh); - -#endif diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h deleted file mode 100644 index 324d31b14852..000000000000 --- a/arch/arm/plat-omap/include/plat/multi.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Support for compiling in multiple OMAP processors - * - * Copyright (C) 2010 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __PLAT_OMAP_MULTI_H -#define __PLAT_OMAP_MULTI_H - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef MULTI_OMAP2 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS -# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2PLUS can't be selected at the same time" -# endif -#endif -#ifdef CONFIG_SOC_OMAP2420 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2420 -# endif -#endif -#ifdef CONFIG_SOC_OMAP2430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2430 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP3 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap3 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP4 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap4 -# endif -#endif - -#ifdef CONFIG_SOC_OMAP5 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap5 -# endif -#endif - -#ifdef CONFIG_SOC_AM33XX -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME am33xx -# endif -#endif - -#endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h deleted file mode 100644 index 67faa7b8fe92..000000000000 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ /dev/null @@ -1,352 +0,0 @@ -/* - * omap-pm.h - OMAP power management interface - * - * Copyright (C) 2008-2010 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * Paul Walmsley - * - * Interface developed by (in alphabetical order): Karthik Dasu, Jouni - * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa, - * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, - * Richard Woodruff - */ - -#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H -#define ASM_ARM_ARCH_OMAP_OMAP_PM_H - -#include <linux/device.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/opp.h> - -/* - * agent_id values for use with omap_pm_set_min_bus_tput(): - * - * OCP_INITIATOR_AGENT is only valid for devices that can act as - * initiators -- it represents the device's L3 interconnect - * connection. OCP_TARGET_AGENT represents the device's L4 - * interconnect connection. - */ -#define OCP_TARGET_AGENT 1 -#define OCP_INITIATOR_AGENT 2 - -/** - * omap_pm_if_early_init - OMAP PM init code called before clock fw init - * @mpu_opp_table: array ptr to struct omap_opp for MPU - * @dsp_opp_table: array ptr to struct omap_opp for DSP - * @l3_opp_table : array ptr to struct omap_opp for CORE - * - * Initialize anything that must be configured before the clock - * framework starts. The "_if_" is to avoid name collisions with the - * PM idle-loop code. - */ -int __init omap_pm_if_early_init(void); - -/** - * omap_pm_if_init - OMAP PM init code called after clock fw init - * - * The main initialization code. OPP tables are passed in here. The - * "_if_" is to avoid name collisions with the PM idle-loop code. - */ -int __init omap_pm_if_init(void); - -/** - * omap_pm_if_exit - OMAP PM exit code - * - * Exit code; currently unused. The "_if_" is to avoid name - * collisions with the PM idle-loop code. - */ -void omap_pm_if_exit(void); - -/* - * Device-driver-originated constraints (via board-*.c files, platform_data) - */ - - -/** - * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency - * @dev: struct device * requesting the constraint - * @t: maximum MPU wakeup latency in microseconds - * - * Request that the maximum interrupt latency for the MPU to be no - * greater than @t microseconds. "Interrupt latency" in this case is - * defined as the elapsed time from the occurrence of a hardware or - * timer interrupt to the time when the device driver's interrupt - * service routine has been entered by the MPU. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the MPU powerdomain into, and - * possibly the CORE powerdomain as well, since interrupt handling - * code currently runs from SDRAM. Advanced PM or board*.c code may - * also configure interrupt controller priorities, OCP bus priorities, - * CPU speed(s), etc. - * - * This function will not affect device wakeup latency, e.g., time - * elapsed from when a device driver enables a hardware device with - * clk_enable(), to when the device is ready for register access or - * other use. To control this device wakeup latency, use - * omap_pm_set_max_dev_wakeup_lat() - * - * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the - * previous t value. To remove the latency target for the MPU, call - * with t = -1. - * - * XXX This constraint will be deprecated soon in favor of the more - * general omap_pm_set_max_dev_wakeup_lat() - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); - - -/** - * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device - * @dev: struct device * requesting the constraint - * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT) - * @r: minimum throughput (in KiB/s) - * - * Request that the minimum data throughput on the OCP interconnect - * attached to device @dev interconnect agent @tbus_id be no less - * than @r KiB/s. - * - * It is expected that the OMAP PM or bus code will use this - * information to set the interconnect clock to run at the lowest - * possible speed that satisfies all current system users. The PM or - * bus code will adjust the estimate based on its model of the bus, so - * device driver authors should attempt to specify an accurate - * quantity for their device use case, and let the PM or bus code - * overestimate the numbers as necessary to handle request/response - * latency, other competing users on the system, etc. On OMAP2/3, if - * a driver requests a minimum L4 interconnect speed constraint, the - * code will also need to add an minimum L3 interconnect speed - * constraint, - * - * Multiple calls to omap_pm_set_min_bus_tput() will replace the - * previous rate value for this device. To remove the interconnect - * throughput restriction for this device, call with r = 0. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); - - -/** - * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency - * @req_dev: struct device * requesting the constraint, or NULL if none - * @dev: struct device * to set the constraint one - * @t: maximum device wakeup latency in microseconds - * - * Request that the maximum amount of time necessary for a device @dev - * to become accessible after its clocks are enabled should be no - * greater than @t microseconds. Specifically, this represents the - * time from when a device driver enables device clocks with - * clk_enable(), to when the register reads and writes on the device - * will succeed. This function should be called before clk_disable() - * is called, since the power state transition decision may be made - * during clk_disable(). - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the powerdomain enclosing this - * device into. - * - * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the - * previous wakeup latency values for this device. To remove the - * wakeup latency restriction for this device, call with t = -1. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, - long t); - - -/** - * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency - * @dev: struct device * - * @t: maximum DMA transfer start latency in microseconds - * - * Request that the maximum system DMA transfer start latency for this - * device 'dev' should be no greater than 't' microseconds. "DMA - * transfer start latency" here is defined as the elapsed time from - * when a device (e.g., McBSP) requests that a system DMA transfer - * start or continue, to the time at which data starts to flow into - * that device from the system DMA controller. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the CORE powerdomain into. - * - * Since system DMA transfers may not involve the MPU, this function - * will not affect MPU wakeup latency. Use set_max_cpu_lat() to do - * so. Similarly, this function will not affect device wakeup latency - * -- use set_max_dev_wakeup_lat() to affect that. - * - * Multiple calls to set_max_sdma_lat() will replace the previous t - * value for this device. To remove the maximum DMA latency for this - * device, call with t = -1. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_sdma_lat(struct device *dev, long t); - - -/** - * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev - * @dev: struct device * requesting the constraint - * @clk: struct clk * to set the minimum rate constraint on - * @r: minimum rate in Hz - * - * Request that the minimum clock rate on the device @dev's clk @clk - * be no less than @r Hz. - * - * It is expected that the OMAP PM code will use this information to - * find an OPP or clock setting that will satisfy this clock rate - * constraint, along with any other applicable system constraints on - * the clock rate or corresponding voltage, etc. - * - * omap_pm_set_min_clk_rate() differs from the clock code's - * clk_set_rate() in that it considers other constraints before taking - * any hardware action, and may change a system OPP rather than just a - * clock rate. clk_set_rate() is intended to be a low-level - * interface. - * - * omap_pm_set_min_clk_rate() is easily open to abuse. A better API - * would be something like "omap_pm_set_min_dev_performance()"; - * however, there is no easily-generalizable concept of performance - * that applies to all devices. Only a device (and possibly the - * device subsystem) has both the subsystem-specific knowledge, and - * the hardware IP block-specific knowledge, to translate a constraint - * on "touchscreen sampling accuracy" or "number of pixels or polygons - * rendered per second" to a clock rate. This translation can be - * dependent on the hardware IP block's revision, or firmware version, - * and the driver is the only code on the system that has this - * information and can know how to translate that into a clock rate. - * - * The intended use-case for this function is for userspace or other - * kernel code to communicate a particular performance requirement to - * a subsystem; then for the subsystem to communicate that requirement - * to something that is meaningful to the device driver; then for the - * device driver to convert that requirement to a clock rate, and to - * then call omap_pm_set_min_clk_rate(). - * - * Users of this function (such as device drivers) should not simply - * call this function with some high clock rate to ensure "high - * performance." Rather, the device driver should take a performance - * constraint from its subsystem, such as "render at least X polygons - * per second," and use some formula or table to convert that into a - * clock rate constraint given the hardware type and hardware - * revision. Device drivers or subsystems should not assume that they - * know how to make a power/performance tradeoff - some device use - * cases may tolerate a lower-fidelity device function for lower power - * consumption; others may demand a higher-fidelity device function, - * no matter what the power consumption. - * - * Multiple calls to omap_pm_set_min_clk_rate() will replace the - * previous rate value for the device @dev. To remove the minimum clock - * rate constraint for the device, call with r = 0. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r); - -/* - * DSP Bridge-specific constraints - */ - -/** - * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table - * - * Intended for use by DSPBridge. Returns an array of OPP->DSP clock - * frequency entries. The final item in the array should have .rate = - * .opp_id = 0. - */ -const struct omap_opp *omap_pm_dsp_get_opp_table(void); - -/** - * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge - * @opp_id: target DSP OPP ID - * - * Set a minimum OPP ID for the DSP. This is intended to be called - * only from the DSP Bridge MPU-side driver. Unfortunately, the only - * information that code receives from the DSP/BIOS load estimator is the - * target OPP ID; hence, this interface. No return value. - */ -void omap_pm_dsp_set_min_opp(u8 opp_id); - -/** - * omap_pm_dsp_get_opp - report the current DSP OPP ID - * - * Report the current OPP for the DSP. Since on OMAP3, the DSP and - * MPU share a single voltage domain, the OPP ID returned back may - * represent a higher DSP speed than the OPP requested via - * omap_pm_dsp_set_min_opp(). - * - * Returns the current VDD1 OPP ID, or 0 upon error. - */ -u8 omap_pm_dsp_get_opp(void); - - -/* - * CPUFreq-originated constraint - * - * In the future, this should be handled by custom OPP clocktype - * functions. - */ - -/** - * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr - * - * Provide a frequency table usable by CPUFreq for the current chip/board. - * Returns a pointer to a struct cpufreq_frequency_table array or NULL - * upon error. - */ -struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void); - -/** - * omap_pm_cpu_set_freq - set the current minimum MPU frequency - * @f: MPU frequency in Hz - * - * Set the current minimum CPU frequency. The actual CPU frequency - * used could end up higher if the DSP requested a higher OPP. - * Intended to be called by plat-omap/cpu_omap.c:omap_target(). No - * return value. - */ -void omap_pm_cpu_set_freq(unsigned long f); - -/** - * omap_pm_cpu_get_freq - report the current CPU frequency - * - * Returns the current MPU frequency, or 0 upon error. - */ -unsigned long omap_pm_cpu_get_freq(void); - - -/* - * Device context loss tracking - */ - -/** - * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx - * @dev: struct device * - * - * This function returns the number of times that the device @dev has - * lost its internal context. This generally occurs on a powerdomain - * transition to OFF. Drivers use this as an optimization to avoid restoring - * context if the device hasn't lost it. To use, drivers should initially - * call this in their context save functions and store the result. Early in - * the driver's context restore function, the driver should call this function - * again, and compare the result to the stored counter. If they differ, the - * driver must restore device context. If the number of context losses - * exceeds the maximum positive integer, the function will wrap to 0 and - * continue counting. Returns the number of context losses for this device, - * or negative value upon error. - */ -int omap_pm_get_dev_context_loss_count(struct device *dev); - -void omap_pm_enable_off_mode(void); -void omap_pm_disable_off_mode(void); - -#endif diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h deleted file mode 100644 index 0e4acd2d2deb..000000000000 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __OMAP_SECURE_H__ -#define __OMAP_SECURE_H__ - -#include <linux/types.h> - -extern int omap_secure_ram_reserve_memblock(void); - -#ifdef CONFIG_OMAP4_ERRATA_I688 -extern int omap_barrier_reserve_memblock(void); -#else -static inline void omap_barrier_reserve_memblock(void) -{ } -#endif -#endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h deleted file mode 100644 index 106f50665804..000000000000 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * omap_device headers - * - * Copyright (C) 2009 Nokia Corporation - * Paul Walmsley - * - * Developed in collaboration with (alphabetical order): Benoit - * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram - * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard - * Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Eventually this type of functionality should either be - * a) implemented via arch-specific pointers in platform_device - * or - * b) implemented as a proper omap_bus/omap_device in Linux, no more - * platform_device - * - * omap_device differs from omap_hwmod in that it includes external - * (e.g., board- and system-level) integration details. omap_hwmod - * stores hardware data that is invariant for a given OMAP chip. - * - * To do: - * - GPIO integration - * - regulator integration - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <plat/omap_hwmod.h> - -extern struct dev_pm_domain omap_device_pm_domain; - -/* omap_device._state values */ -#define OMAP_DEVICE_STATE_UNKNOWN 0 -#define OMAP_DEVICE_STATE_ENABLED 1 -#define OMAP_DEVICE_STATE_IDLE 2 -#define OMAP_DEVICE_STATE_SHUTDOWN 3 - -/* omap_device.flags values */ -#define OMAP_DEVICE_SUSPENDED BIT(0) -#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1) - -/** - * struct omap_device - omap_device wrapper for platform_devices - * @pdev: platform_device - * @hwmods: (one .. many per omap_device) - * @hwmods_cnt: ARRAY_SIZE() of @hwmods - * @pm_lats: ptr to an omap_device_pm_latency table - * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats - * @pm_lat_level: array index of the last odpl entry executed - -1 if never - * @dev_wakeup_lat: dev wakeup latency in nanoseconds - * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM - * @_state: one of OMAP_DEVICE_STATE_* (see above) - * @flags: device flags - * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h> - * - * Integrates omap_hwmod data into Linux platform_device. - * - * Field names beginning with underscores are for the internal use of - * the omap_device code. - * - */ -struct omap_device { - struct platform_device *pdev; - struct omap_hwmod **hwmods; - struct omap_device_pm_latency *pm_lats; - u32 dev_wakeup_lat; - u32 _dev_wakeup_lat_limit; - unsigned long _driver_status; - u8 pm_lats_cnt; - s8 pm_lat_level; - u8 hwmods_cnt; - u8 _state; - u8 flags; -}; - -/* Device driver interface (call via platform_data fn ptrs) */ - -int omap_device_enable(struct platform_device *pdev); -int omap_device_idle(struct platform_device *pdev); -int omap_device_shutdown(struct platform_device *pdev); - -/* Core code interface */ - -struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, - struct omap_hwmod *oh, void *pdata, - int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device); - -struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, - struct omap_hwmod **oh, int oh_cnt, - void *pdata, int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device); - -struct omap_device *omap_device_alloc(struct platform_device *pdev, - struct omap_hwmod **ohs, int oh_cnt, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt); -void omap_device_delete(struct omap_device *od); -int omap_device_register(struct platform_device *pdev); - -void __iomem *omap_device_get_rt_va(struct omap_device *od); -struct device *omap_device_get_by_hwmod_name(const char *oh_name); - -/* OMAP PM interface */ -int omap_device_align_pm_lat(struct platform_device *pdev, - u32 new_wakeup_lat_limit); -struct powerdomain *omap_device_get_pwrdm(struct omap_device *od); -int omap_device_get_context_loss_count(struct platform_device *pdev); - -/* Other */ - -int omap_device_assert_hardreset(struct platform_device *pdev, - const char *name); -int omap_device_deassert_hardreset(struct platform_device *pdev, - const char *name); -int omap_device_idle_hwmods(struct omap_device *od); -int omap_device_enable_hwmods(struct omap_device *od); - -int omap_device_disable_clocks(struct omap_device *od); -int omap_device_enable_clocks(struct omap_device *od); - -/* - * Entries should be kept in latency order ascending - * - * deact_lat is the maximum number of microseconds required to complete - * deactivate_func() at the device's slowest OPP. - * - * act_lat is the maximum number of microseconds required to complete - * activate_func() at the device's slowest OPP. - * - * This will result in some suboptimal power management decisions at fast - * OPPs, but avoids having to recompute all device power management decisions - * if the system shifts from a fast OPP to a slow OPP (in order to meet - * latency requirements). - * - * XXX should deactivate_func/activate_func() take platform_device pointers - * rather than omap_device pointers? - */ -struct omap_device_pm_latency { - u32 deactivate_lat; - u32 deactivate_lat_worst; - int (*deactivate_func)(struct omap_device *od); - u32 activate_lat; - u32 activate_lat_worst; - int (*activate_func)(struct omap_device *od); - u32 flags; -}; - -#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1) - -/* Get omap_device pointer from platform_device pointer */ -static inline struct omap_device *to_omap_device(struct platform_device *pdev) -{ - return pdev ? pdev->archdata.od : NULL; -} - -static inline -void omap_device_disable_idle_on_suspend(struct platform_device *pdev) -{ - struct omap_device *od = to_omap_device(pdev); - - od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; -} - -#endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h deleted file mode 100644 index b3349f7b1a2c..000000000000 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ /dev/null @@ -1,676 +0,0 @@ -/* - * omap_hwmod macros, structures - * - * Copyright (C) 2009-2011 Nokia Corporation - * Copyright (C) 2012 Texas Instruments, Inc. - * Paul Walmsley - * - * Created in collaboration with (alphabetical order): Benoît Cousson, - * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari - * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * These headers and macros are used to define OMAP on-chip module - * data and their integration with other OMAP modules and Linux. - * Copious documentation and references can also be found in the - * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this - * writing). - * - * To do: - * - add interconnect error log structures - * - add pinmuxing - * - init_conn_id_bit (CONNID_BIT_VECTOR) - * - implement default hwmod SMS/SDRC flags? - * - move Linux-specific data ("non-ROM data") out - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/ioport.h> -#include <linux/spinlock.h> -#include <plat/cpu.h> - -struct omap_device; - -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; - -/* - * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant - * with the original PRCM protocol defined for OMAP2420 - */ -#define SYSC_TYPE1_MIDLEMODE_SHIFT 12 -#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT) -#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8 -#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT) -#define SYSC_TYPE1_SIDLEMODE_SHIFT 3 -#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT) -#define SYSC_TYPE1_ENAWAKEUP_SHIFT 2 -#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT) -#define SYSC_TYPE1_SOFTRESET_SHIFT 1 -#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT) -#define SYSC_TYPE1_AUTOIDLE_SHIFT 0 -#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT) - -/* - * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant - * with the new PRCM protocol defined for new OMAP4 IPs. - */ -#define SYSC_TYPE2_SOFTRESET_SHIFT 0 -#define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT) -#define SYSC_TYPE2_SIDLEMODE_SHIFT 2 -#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT) -#define SYSC_TYPE2_MIDLEMODE_SHIFT 4 -#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT) -#define SYSC_TYPE2_DMADISABLE_SHIFT 16 -#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT) - -/* - * OCP SYSCONFIG bit shifts/masks TYPE3. - * This is applicable for some IPs present in AM33XX - */ -#define SYSC_TYPE3_SIDLEMODE_SHIFT 0 -#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT) -#define SYSC_TYPE3_MIDLEMODE_SHIFT 2 -#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT) - -/* OCP SYSSTATUS bit shifts/masks */ -#define SYSS_RESETDONE_SHIFT 0 -#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT) - -/* Master standby/slave idle mode flags */ -#define HWMOD_IDLEMODE_FORCE (1 << 0) -#define HWMOD_IDLEMODE_NO (1 << 1) -#define HWMOD_IDLEMODE_SMART (1 << 2) -#define HWMOD_IDLEMODE_SMART_WKUP (1 << 3) - -/* modulemode control type (SW or HW) */ -#define MODULEMODE_HWCTRL 1 -#define MODULEMODE_SWCTRL 2 - - -/** - * struct omap_hwmod_mux_info - hwmod specific mux configuration - * @pads: array of omap_device_pad entries - * @nr_pads: number of omap_device_pad entries - * - * Note that this is currently built during init as needed. - */ -struct omap_hwmod_mux_info { - int nr_pads; - struct omap_device_pad *pads; - int nr_pads_dynamic; - struct omap_device_pad **pads_dynamic; - int *irqs; - bool enabled; -}; - -/** - * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod - * @name: name of the IRQ channel (module local name) - * @irq: IRQ channel ID (should be non-negative except -1 = terminator) - * - * @name should be something short, e.g., "tx" or "rx". It is for use - * by platform_get_resource_byname(). It is defined locally to the - * hwmod. - */ -struct omap_hwmod_irq_info { - const char *name; - s16 irq; -}; - -/** - * struct omap_hwmod_dma_info - DMA channels used by the hwmod - * @name: name of the DMA channel (module local name) - * @dma_req: DMA request ID (should be non-negative except -1 = terminator) - * - * @name should be something short, e.g., "tx" or "rx". It is for use - * by platform_get_resource_byname(). It is defined locally to the - * hwmod. - */ -struct omap_hwmod_dma_info { - const char *name; - s16 dma_req; -}; - -/** - * struct omap_hwmod_rst_info - IPs reset lines use by hwmod - * @name: name of the reset line (module local name) - * @rst_shift: Offset of the reset bit - * @st_shift: Offset of the reset status bit (OMAP2/3 only) - * - * @name should be something short, e.g., "cpu0" or "rst". It is defined - * locally to the hwmod. - */ -struct omap_hwmod_rst_info { - const char *name; - u8 rst_shift; - u8 st_shift; -}; - -/** - * struct omap_hwmod_opt_clk - optional clocks used by this hwmod - * @role: "sys", "32k", "tv", etc -- for use in clk_get() - * @clk: opt clock: OMAP clock name - * @_clk: pointer to the struct clk (filled in at runtime) - * - * The module's interface clock and main functional clock should not - * be added as optional clocks. - */ -struct omap_hwmod_opt_clk { - const char *role; - const char *clk; - struct clk *_clk; -}; - - -/* omap_hwmod_omap2_firewall.flags bits */ -#define OMAP_FIREWALL_L3 (1 << 0) -#define OMAP_FIREWALL_L4 (1 << 1) - -/** - * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data - * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_* - * @l4_fw_region: L4 firewall region ID - * @l4_prot_group: L4 protection group ID - * @flags: (see omap_hwmod_omap2_firewall.flags macros above) - */ -struct omap_hwmod_omap2_firewall { - u8 l3_perm_bit; - u8 l4_fw_region; - u8 l4_prot_group; - u8 flags; -}; - - -/* - * omap_hwmod_addr_space.flags bits - * - * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init. - * ADDR_TYPE_RT: Address space contains module register target data. - */ -#define ADDR_MAP_ON_INIT (1 << 0) /* XXX does not belong */ -#define ADDR_TYPE_RT (1 << 1) - -/** - * struct omap_hwmod_addr_space - address space handled by the hwmod - * @name: name of the address space - * @pa_start: starting physical address - * @pa_end: ending physical address - * @flags: (see omap_hwmod_addr_space.flags macros above) - * - * Address space doesn't necessarily follow physical interconnect - * structure. GPMC is one example. - */ -struct omap_hwmod_addr_space { - const char *name; - u32 pa_start; - u32 pa_end; - u8 flags; -}; - - -/* - * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this - * interface to interact with the hwmod. Used to add sleep dependencies - * when the module is enabled or disabled. - */ -#define OCP_USER_MPU (1 << 0) -#define OCP_USER_SDMA (1 << 1) -#define OCP_USER_DSP (1 << 2) -#define OCP_USER_IVA (1 << 3) - -/* omap_hwmod_ocp_if.flags bits */ -#define OCPIF_SWSUP_IDLE (1 << 0) -#define OCPIF_CAN_BURST (1 << 1) - -/* omap_hwmod_ocp_if._int_flags possibilities */ -#define _OCPIF_INT_FLAGS_REGISTERED (1 << 0) - - -/** - * struct omap_hwmod_ocp_if - OCP interface data - * @master: struct omap_hwmod that initiates OCP transactions on this link - * @slave: struct omap_hwmod that responds to OCP transactions on this link - * @addr: address space associated with this link - * @clk: interface clock: OMAP clock name - * @_clk: pointer to the interface struct clk (filled in at runtime) - * @fw: interface firewall data - * @width: OCP data width - * @user: initiators using this interface (see OCP_USER_* macros above) - * @flags: OCP interface flags (see OCPIF_* macros above) - * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above) - * - * It may also be useful to add a tag_cnt field for OCP2.x devices. - * - * Parameter names beginning with an underscore are managed internally by - * the omap_hwmod code and should not be set during initialization. - */ -struct omap_hwmod_ocp_if { - struct omap_hwmod *master; - struct omap_hwmod *slave; - struct omap_hwmod_addr_space *addr; - const char *clk; - struct clk *_clk; - union { - struct omap_hwmod_omap2_firewall omap2; - } fw; - u8 width; - u8 user; - u8 flags; - u8 _int_flags; -}; - - -/* Macros for use in struct omap_hwmod_sysconfig */ - -/* Flags for use in omap_hwmod_sysconfig.idlemodes */ -#define MASTER_STANDBY_SHIFT 4 -#define SLAVE_IDLE_SHIFT 0 -#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT) -#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT) -#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT) -#define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT) -#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) -#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) -#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) -#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT) - -/* omap_hwmod_sysconfig.sysc_flags capability flags */ -#define SYSC_HAS_AUTOIDLE (1 << 0) -#define SYSC_HAS_SOFTRESET (1 << 1) -#define SYSC_HAS_ENAWAKEUP (1 << 2) -#define SYSC_HAS_EMUFREE (1 << 3) -#define SYSC_HAS_CLOCKACTIVITY (1 << 4) -#define SYSC_HAS_SIDLEMODE (1 << 5) -#define SYSC_HAS_MIDLEMODE (1 << 6) -#define SYSS_HAS_RESET_STATUS (1 << 7) -#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ -#define SYSC_HAS_RESET_STATUS (1 << 9) -#define SYSC_HAS_DMADISABLE (1 << 10) - -/* omap_hwmod_sysconfig.clockact flags */ -#define CLOCKACT_TEST_BOTH 0x0 -#define CLOCKACT_TEST_MAIN 0x1 -#define CLOCKACT_TEST_ICLK 0x2 -#define CLOCKACT_TEST_NONE 0x3 - -/** - * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets. - * @midle_shift: Offset of the midle bit - * @clkact_shift: Offset of the clockactivity bit - * @sidle_shift: Offset of the sidle bit - * @enwkup_shift: Offset of the enawakeup bit - * @srst_shift: Offset of the softreset bit - * @autoidle_shift: Offset of the autoidle bit - * @dmadisable_shift: Offset of the dmadisable bit - */ -struct omap_hwmod_sysc_fields { - u8 midle_shift; - u8 clkact_shift; - u8 sidle_shift; - u8 enwkup_shift; - u8 srst_shift; - u8 autoidle_shift; - u8 dmadisable_shift; -}; - -/** - * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data - * @rev_offs: IP block revision register offset (from module base addr) - * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) - * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) - * @srst_udelay: Delay needed after doing a softreset in usecs - * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} - * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported - * @clockact: the default value of the module CLOCKACTIVITY bits - * - * @clockact describes to the module which clocks are likely to be - * disabled when the PRCM issues its idle request to the module. Some - * modules have separate clockdomains for the interface clock and main - * functional clock, and can check whether they should acknowledge the - * idle request based on the internal module functionality that has - * been associated with the clocks marked in @clockact. This field is - * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below) - * - * @sysc_fields: structure containing the offset positions of various bits in - * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or - * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on - * whether the device ip is compliant with the original PRCM protocol - * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs. - * If the device follows a different scheme for the sysconfig register , - * then this field has to be populated with the correct offset structure. - */ -struct omap_hwmod_class_sysconfig { - u32 rev_offs; - u32 sysc_offs; - u32 syss_offs; - u16 sysc_flags; - struct omap_hwmod_sysc_fields *sysc_fields; - u8 srst_udelay; - u8 idlemodes; - u8 clockact; -}; - -/** - * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data - * @module_offs: PRCM submodule offset from the start of the PRM/CM - * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3) - * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs - * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3) - * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit - * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit - * - * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST, - * WKEN, GRPSEL registers. In an ideal world, no extra information - * would be needed for IDLEST information, but alas, there are some - * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit - * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST) - */ -struct omap_hwmod_omap2_prcm { - s16 module_offs; - u8 prcm_reg_id; - u8 module_bit; - u8 idlest_reg_id; - u8 idlest_idle_bit; - u8 idlest_stdby_bit; -}; - -/* - * Possible values for struct omap_hwmod_omap4_prcm.flags - * - * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM - * module-level context loss register associated with them; this - * flag bit should be set in those cases - */ -#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0) - -/** - * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data - * @clkctrl_reg: PRCM address of the clock control register - * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM - * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register - * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM - * @submodule_wkdep_bit: bit shift of the WKDEP range - * @flags: PRCM register capabilities for this IP block - * - * If @lostcontext_mask is not defined, context loss check code uses - * whole register without masking. @lostcontext_mask should only be - * defined in cases where @context_offs register is shared by two or - * more hwmods. - */ -struct omap_hwmod_omap4_prcm { - u16 clkctrl_offs; - u16 rstctrl_offs; - u16 rstst_offs; - u16 context_offs; - u32 lostcontext_mask; - u8 submodule_wkdep_bit; - u8 modulemode; - u8 flags; -}; - - -/* - * omap_hwmod.flags definitions - * - * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out - * of idle, rather than relying on module smart-idle - * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out - * of standby, rather than relying on module smart-standby - * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for - * SDRAM controller, etc. XXX probably belongs outside the main hwmod file - * XXX Should be HWMOD_SETUP_NO_RESET - * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM - * controller, etc. XXX probably belongs outside the main hwmod file - * XXX Should be HWMOD_SETUP_NO_IDLE - * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE) - * when module is enabled, rather than the default, which is to - * enable autoidle - * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup - * HWMOD_NO_IDLEST: this module does not have idle status - this is the case - * only for few initiator modules on OMAP2 & 3. - * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset. - * This is needed for devices like DSS that require optional clocks enabled - * in order to complete the reset. Optional clocks will be disabled - * again after the reset. - * HWMOD_16BIT_REG: Module has 16bit registers - */ -#define HWMOD_SWSUP_SIDLE (1 << 0) -#define HWMOD_SWSUP_MSTANDBY (1 << 1) -#define HWMOD_INIT_NO_RESET (1 << 2) -#define HWMOD_INIT_NO_IDLE (1 << 3) -#define HWMOD_NO_OCP_AUTOIDLE (1 << 4) -#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) -#define HWMOD_NO_IDLEST (1 << 6) -#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) -#define HWMOD_16BIT_REG (1 << 8) - -/* - * omap_hwmod._int_flags definitions - * These are for internal use only and are managed by the omap_hwmod code. - * - * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module - * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP - * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached - * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - - * causes the first call to _enable() to only update the pinmux - */ -#define _HWMOD_NO_MPU_PORT (1 << 0) -#define _HWMOD_WAKEUP_ENABLED (1 << 1) -#define _HWMOD_SYSCONFIG_LOADED (1 << 2) -#define _HWMOD_SKIP_ENABLE (1 << 3) - -/* - * omap_hwmod._state definitions - * - * INITIALIZED: reset (optionally), initialized, enabled, disabled - * (optionally) - * - * - */ -#define _HWMOD_STATE_UNKNOWN 0 -#define _HWMOD_STATE_REGISTERED 1 -#define _HWMOD_STATE_CLKS_INITED 2 -#define _HWMOD_STATE_INITIALIZED 3 -#define _HWMOD_STATE_ENABLED 4 -#define _HWMOD_STATE_IDLE 5 -#define _HWMOD_STATE_DISABLED 6 - -/** - * struct omap_hwmod_class - the type of an IP block - * @name: name of the hwmod_class - * @sysc: device SYSCONFIG/SYSSTATUS register data - * @rev: revision of the IP class - * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown - * @reset: ptr to fn to be executed in place of the standard hwmod reset fn - * - * Represent the class of a OMAP hardware "modules" (e.g. timer, - * smartreflex, gpio, uart...) - * - * @pre_shutdown is a function that will be run immediately before - * hwmod clocks are disabled, etc. It is intended for use for hwmods - * like the MPU watchdog, which cannot be disabled with the standard - * omap_hwmod_shutdown(). The function should return 0 upon success, - * or some negative error upon failure. Returning an error will cause - * omap_hwmod_shutdown() to abort the device shutdown and return an - * error. - * - * If @reset is defined, then the function it points to will be - * executed in place of the standard hwmod _reset() code in - * mach-omap2/omap_hwmod.c. This is needed for IP blocks which have - * unusual reset sequences - usually processor IP blocks like the IVA. - */ -struct omap_hwmod_class { - const char *name; - struct omap_hwmod_class_sysconfig *sysc; - u32 rev; - int (*pre_shutdown)(struct omap_hwmod *oh); - int (*reset)(struct omap_hwmod *oh); -}; - -/** - * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs - * @ocp_if: OCP interface structure record pointer - * @node: list_head pointing to next struct omap_hwmod_link in a list - */ -struct omap_hwmod_link { - struct omap_hwmod_ocp_if *ocp_if; - struct list_head node; -}; - -/** - * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks) - * @name: name of the hwmod - * @class: struct omap_hwmod_class * to the class of this hwmod - * @od: struct omap_device currently associated with this hwmod (internal use) - * @mpu_irqs: ptr to an array of MPU IRQs - * @sdma_reqs: ptr to an array of System DMA request IDs - * @prcm: PRCM data pertaining to this hwmod - * @main_clk: main clock: OMAP clock name - * @_clk: pointer to the main struct clk (filled in at runtime) - * @opt_clks: other device clocks that drivers can request (0..*) - * @voltdm: pointer to voltage domain (filled in at runtime) - * @dev_attr: arbitrary device attributes that can be passed to the driver - * @_sysc_cache: internal-use hwmod flags - * @_mpu_rt_va: cached register target start address (internal use) - * @_mpu_port: cached MPU register target slave (internal use) - * @opt_clks_cnt: number of @opt_clks - * @master_cnt: number of @master entries - * @slaves_cnt: number of @slave entries - * @response_lat: device OCP response latency (in interface clock cycles) - * @_int_flags: internal-use hwmod flags - * @_state: internal-use hwmod state - * @_postsetup_state: internal-use state to leave the hwmod in after _setup() - * @flags: hwmod flags (documented below) - * @_lock: spinlock serializing operations on this hwmod - * @node: list node for hwmod list (internal use) - * - * @main_clk refers to this module's "main clock," which for our - * purposes is defined as "the functional clock needed for register - * accesses to complete." Modules may not have a main clock if the - * interface clock also serves as a main clock. - * - * Parameter names beginning with an underscore are managed internally by - * the omap_hwmod code and should not be set during initialization. - * - * @masters and @slaves are now deprecated. - */ -struct omap_hwmod { - const char *name; - struct omap_hwmod_class *class; - struct omap_device *od; - struct omap_hwmod_mux_info *mux; - struct omap_hwmod_irq_info *mpu_irqs; - struct omap_hwmod_dma_info *sdma_reqs; - struct omap_hwmod_rst_info *rst_lines; - union { - struct omap_hwmod_omap2_prcm omap2; - struct omap_hwmod_omap4_prcm omap4; - } prcm; - const char *main_clk; - struct clk *_clk; - struct omap_hwmod_opt_clk *opt_clks; - char *clkdm_name; - struct clockdomain *clkdm; - struct list_head master_ports; /* connect to *_IA */ - struct list_head slave_ports; /* connect to *_TA */ - void *dev_attr; - u32 _sysc_cache; - void __iomem *_mpu_rt_va; - spinlock_t _lock; - struct list_head node; - struct omap_hwmod_ocp_if *_mpu_port; - u16 flags; - u8 response_lat; - u8 rst_lines_cnt; - u8 opt_clks_cnt; - u8 masters_cnt; - u8 slaves_cnt; - u8 hwmods_cnt; - u8 _int_flags; - u8 _state; - u8 _postsetup_state; -}; - -struct omap_hwmod *omap_hwmod_lookup(const char *name); -int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), - void *data); - -int __init omap_hwmod_setup_one(const char *name); - -int omap_hwmod_enable(struct omap_hwmod *oh); -int omap_hwmod_idle(struct omap_hwmod *oh); -int omap_hwmod_shutdown(struct omap_hwmod *oh); - -int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); -int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); -int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); - -int omap_hwmod_enable_clocks(struct omap_hwmod *oh); -int omap_hwmod_disable_clocks(struct omap_hwmod *oh); - -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - -int omap_hwmod_reset(struct omap_hwmod *oh); -void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); - -void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); -u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); -int omap_hwmod_softreset(struct omap_hwmod *oh); - -int omap_hwmod_count_resources(struct omap_hwmod *oh); -int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); -int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); -int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, - const char *name, struct resource *res); - -struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); -void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); - -int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); -int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); - -int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); -int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); - -int omap_hwmod_for_each_by_class(const char *classname, - int (*fn)(struct omap_hwmod *oh, - void *user), - void *user); - -int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state); -int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); - -int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); - -int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); - -extern void __init omap_hwmod_init(void); - -const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); - -/* - * Chip variant-specific hwmod init routines - XXX should be converted - * to use initcalls once the initial boot ordering is straightened out - */ -extern int omap2420_hwmod_init(void); -extern int omap2430_hwmod_init(void); -extern int omap3xxx_hwmod_init(void); -extern int omap44xx_hwmod_init(void); -extern int am33xx_hwmod_init(void); - -extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois); - -#endif diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h deleted file mode 100644 index 36d6a7666216..000000000000 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef ____ASM_ARCH_SDRC_H -#define ____ASM_ARCH_SDRC_H - -/* - * OMAP2/3 SDRC/SMS register definitions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Tony Lindgren - * Paul Walmsley - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ - -#define SDRC_SYSCONFIG 0x010 -#define SDRC_CS_CFG 0x040 -#define SDRC_SHARING 0x044 -#define SDRC_ERR_TYPE 0x04C -#define SDRC_DLLA_CTRL 0x060 -#define SDRC_DLLA_STATUS 0x064 -#define SDRC_DLLB_CTRL 0x068 -#define SDRC_DLLB_STATUS 0x06C -#define SDRC_POWER 0x070 -#define SDRC_MCFG_0 0x080 -#define SDRC_MR_0 0x084 -#define SDRC_EMR2_0 0x08c -#define SDRC_ACTIM_CTRL_A_0 0x09c -#define SDRC_ACTIM_CTRL_B_0 0x0a0 -#define SDRC_RFR_CTRL_0 0x0a4 -#define SDRC_MANUAL_0 0x0a8 -#define SDRC_MCFG_1 0x0B0 -#define SDRC_MR_1 0x0B4 -#define SDRC_EMR2_1 0x0BC -#define SDRC_ACTIM_CTRL_A_1 0x0C4 -#define SDRC_ACTIM_CTRL_B_1 0x0C8 -#define SDRC_RFR_CTRL_1 0x0D4 -#define SDRC_MANUAL_1 0x0D8 - -#define SDRC_POWER_AUTOCOUNT_SHIFT 8 -#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) -#define SDRC_POWER_CLKCTRL_SHIFT 4 -#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) -#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) - -/* - * These values represent the number of memory clock cycles between - * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 - * rows per device, and include a subtraction of a 50 cycle window in the - * event that the autorefresh command is delayed due to other SDRC activity. - * The '| 1' sets the ARE field to send one autorefresh when the autorefresh - * counter reaches 0. - * - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) -#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - - -/* - * SMS register access - */ - -#define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) - -/* SMS register offsets - read/write with sms_{read,write}_reg() */ - -#define SMS_SYSCONFIG 0x010 -#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) -#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) -#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) -/* REVISIT: fill in other SMS registers here */ - - -#ifndef __ASSEMBLER__ - -/** - * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate - * @rate: SDRC clock rate (in Hz) - * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate - * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate - * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate - * @mr: Value to program to SDRC_MR for this rate - * - * This structure holds a pre-computed set of register values for the - * SDRC for a given SDRC clock rate and SDRAM chip. These are - * intended to be pre-computed and specified in an array in the board-*.c - * files. The structure is keyed off the 'rate' field. - */ -struct omap_sdrc_params { - unsigned long rate; - u32 actim_ctrla; - u32 actim_ctrlb; - u32 rfr_ctrl; - u32 mr; -}; - -#ifdef CONFIG_SOC_HAS_OMAP2_SDRC -void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); -#else -static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1) {}; -#endif - -int omap2_sdrc_get_params(unsigned long r, - struct omap_sdrc_params **sdrc_cs0, - struct omap_sdrc_params **sdrc_cs1); -void omap2_sms_save_context(void); -void omap2_sms_restore_context(void); - -void omap2_sms_write_rot_control(u32 val, unsigned ctx); -void omap2_sms_write_rot_size(u32 val, unsigned ctx); -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); - -#ifdef CONFIG_ARCH_OMAP2 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - -extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); -struct omap_sdrc_params *rx51_get_sdram_timings(void); - -u32 omap2xxx_sdrc_dll_is_unlocked(void); -u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); - -#endif /* CONFIG_ARCH_OMAP2 */ - -#endif /* __ASSEMBLER__ */ - -#endif diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h deleted file mode 100644 index 65fce44dce34..000000000000 --- a/arch/arm/plat-omap/include/plat/serial.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/serial.h - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include <linux/init.h> - -/* - * Memory entry used for the DEBUG_LL UART configuration, relative to - * start of RAM. See also uncompress.h and debug-macro.S. - * - * Note that using a memory location for storing the UART configuration - * has at least two limitations: - * - * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the - * uncompress code could then partially overwrite itself - * 2. We assume printascii is called at least once before paging_init, - * and addruart has a chance to read OMAP_UART_INFO - */ -#define OMAP_UART_INFO_OFS 0x3ffc - -/* OMAP1 serial ports */ -#define OMAP1_UART1_BASE 0xfffb0000 -#define OMAP1_UART2_BASE 0xfffb0800 -#define OMAP1_UART3_BASE 0xfffb9800 - -/* OMAP2 serial ports */ -#define OMAP2_UART1_BASE 0x4806a000 -#define OMAP2_UART2_BASE 0x4806c000 -#define OMAP2_UART3_BASE 0x4806e000 - -/* OMAP3 serial ports */ -#define OMAP3_UART1_BASE OMAP2_UART1_BASE -#define OMAP3_UART2_BASE OMAP2_UART2_BASE -#define OMAP3_UART3_BASE 0x49020000 -#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ -#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ - -/* OMAP4 serial ports */ -#define OMAP4_UART1_BASE OMAP2_UART1_BASE -#define OMAP4_UART2_BASE OMAP2_UART2_BASE -#define OMAP4_UART3_BASE 0x48020000 -#define OMAP4_UART4_BASE 0x4806e000 - -/* TI81XX serial ports */ -#define TI81XX_UART1_BASE 0x48020000 -#define TI81XX_UART2_BASE 0x48022000 -#define TI81XX_UART3_BASE 0x48024000 - -/* AM3505/3517 UART4 */ -#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ - -/* AM33XX serial port */ -#define AM33XX_UART1_BASE 0x44E09000 - -/* OMAP5 serial ports */ -#define OMAP5_UART1_BASE OMAP2_UART1_BASE -#define OMAP5_UART2_BASE OMAP2_UART2_BASE -#define OMAP5_UART3_BASE OMAP4_UART3_BASE -#define OMAP5_UART4_BASE OMAP4_UART4_BASE -#define OMAP5_UART5_BASE 0x48066000 -#define OMAP5_UART6_BASE 0x48068000 - -/* External port on Zoom2/3 */ -#define ZOOM_UART_BASE 0x10000000 -#define ZOOM_UART_VIRT 0xfa400000 - -#define OMAP_PORT_SHIFT 2 -#define OMAP7XX_PORT_SHIFT 0 -#define ZOOM_PORT_SHIFT 1 - -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) -#define OMAP24XX_BASE_BAUD (48000000/16) - -/* - * DEBUG_LL port encoding stored into the UART1 scratchpad register by - * decomp_setup in uncompress.h - */ -#define OMAP1UART1 11 -#define OMAP1UART2 12 -#define OMAP1UART3 13 -#define OMAP2UART1 21 -#define OMAP2UART2 22 -#define OMAP2UART3 23 -#define OMAP3UART1 OMAP2UART1 -#define OMAP3UART2 OMAP2UART2 -#define OMAP3UART3 33 -#define OMAP3UART4 34 /* Only on 36xx */ -#define OMAP4UART1 OMAP2UART1 -#define OMAP4UART2 OMAP2UART2 -#define OMAP4UART3 43 -#define OMAP4UART4 44 -#define TI81XXUART1 81 -#define TI81XXUART2 82 -#define TI81XXUART3 83 -#define AM33XXUART1 84 -#define OMAP5UART3 OMAP4UART3 -#define OMAP5UART4 OMAP4UART4 -#define ZOOM_UART 95 /* Only on zoom2/3 */ - -/* This is only used by 8250.c for omap1510 */ -#define is_omap_port(pt) ({int __ret = 0; \ - if ((pt)->port.mapbase == OMAP1_UART1_BASE || \ - (pt)->port.mapbase == OMAP1_UART2_BASE || \ - (pt)->port.mapbase == OMAP1_UART3_BASE) \ - __ret = 1; \ - __ret; \ - }) - -#ifndef __ASSEMBLER__ - -struct omap_board_data; -struct omap_uart_port_info; - -extern void omap_serial_init(void); -extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); -extern void omap_serial_init_port(struct omap_board_data *bdata, - struct omap_uart_port_info *platform_data); -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 227ae2657554..ba4525059a99 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -1,18 +1,8 @@ -/* - * arch/arm/plat-omap/include/mach/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +int omap_sram_init(void); -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -#ifndef __ASSEMBLY__ -#include <asm/fncpy.h> +void omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached); +void omap_sram_reset(void); extern void *omap_sram_push_address(unsigned long size); @@ -24,82 +14,3 @@ extern void *omap_sram_push_address(unsigned long size); _res = fncpy(_sram_address, &(funcp), size); \ _res; \ }) - -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern void omap3_sram_restore_context(void); - -/* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - -extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap24xx_sram_reprogram_clock_sz; - -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap242x_sram_ddr_init_sz; - -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap242x_sram_set_prcm_sz; - -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap242x_sram_reprogram_sdrc_sz; - - -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap243x_sram_ddr_init_sz; - -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap243x_sram_set_prcm_sz; - -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - -#ifdef CONFIG_PM -extern void omap_push_sram_idle(void); -#else -static inline void omap_push_sram_idle(void) {} -#endif /* CONFIG_PM */ - -#endif /* __ASSEMBLY__ */ - -/* - * OMAP2+: define the SRAM PA addresses. - * Used by the SRAM management code and the idle sleep code. - */ -#define OMAP2_SRAM_PA 0x40200000 -#define OMAP3_SRAM_PA 0x40200000 -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PA 0x40304000 -#define OMAP4_SRAM_VA 0xfe404000 -#else -#define OMAP4_SRAM_PA 0x40300000 -#endif -#define AM33XX_SRAM_PA 0x40300000 -#endif diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h deleted file mode 100644 index 1b4b2da86203..000000000000 --- a/arch/arm/plat-omap/include/plat/tc.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/tc.h - * - * OMAP Traffic Controller - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __ASM_ARCH_TC_H -#define __ASM_ARCH_TC_H - -#define TCMIF_BASE 0xfffecc00 -#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00) -#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04) -#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08) -#define EMIFS_CONFIG (TCMIF_BASE + 0x0c) -#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) -#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) -#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) -#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) -#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) -#define EMIFF_MRS (TCMIF_BASE + 0x24) -#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) -#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) -#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) -#define TC_ENDIANISM (TCMIF_BASE + 0x34) -#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) -#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) -#define EMIFS_ACS0 (TCMIF_BASE + 0x50) -#define EMIFS_ACS1 (TCMIF_BASE + 0x54) -#define EMIFS_ACS2 (TCMIF_BASE + 0x58) -#define EMIFS_ACS3 (TCMIF_BASE + 0x5c) -#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0) - -/* external EMIFS chipselect regions */ -#define OMAP_CS0_PHYS 0x00000000 -#define OMAP_CS0_SIZE SZ_64M - -#define OMAP_CS1_PHYS 0x04000000 -#define OMAP_CS1_SIZE SZ_64M - -#define OMAP_CS1A_PHYS OMAP_CS1_PHYS -#define OMAP_CS1A_SIZE SZ_32M - -#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE) -#define OMAP_CS1B_SIZE SZ_32M - -#define OMAP_CS2_PHYS 0x08000000 -#define OMAP_CS2_SIZE SZ_64M - -#define OMAP_CS2A_PHYS OMAP_CS2_PHYS -#define OMAP_CS2A_SIZE SZ_32M - -#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE) -#define OMAP_CS2B_SIZE SZ_32M - -#define OMAP_CS3_PHYS 0x0c000000 -#define OMAP_CS3_SIZE SZ_64M - -#ifndef __ASSEMBLER__ - -/* EMIF Slow Interface Configuration Register */ -#define OMAP_EMIFS_CONFIG_FR (1 << 4) -#define OMAP_EMIFS_CONFIG_PDE (1 << 3) -#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) -#define OMAP_EMIFS_CONFIG_BM (1 << 1) -#define OMAP_EMIFS_CONFIG_WP (1 << 0) - -#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) -#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) - -#endif /* __ASSEMBLER__ */ - -#endif /* __ASM_ARCH_TC_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h deleted file mode 100644 index 7f7b112acccb..000000000000 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Rewritten by: - * Author: <source@mvista.com> - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include <asm/memory.h> -#include <asm/mach-types.h> - -#include <plat/serial.h> - -#define MDR1_MODE_MASK 0x07 - -volatile u8 *uart_base; -int uart_shift; - -/* - * Store the DEBUG_LL uart number into memory. - * See also debug-macro.S, and serial.c for related code. - */ -static void set_omap_uart_info(unsigned char port) -{ - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart_shift & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); - *uart_info = port; -} - -static void putc(int c) -{ - if (!uart_base) - return; - - /* Check for UART 16x mode */ - if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) - return; - - while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) - barrier(); - uart_base[UART_TX << uart_shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * Macros to configure UART1 and debug UART - */ -#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ - if (machine_is_##mach()) { \ - uart_base = (volatile u8 *)(dbg_uart); \ - uart_shift = (dbg_shft); \ - port = (dbg_id); \ - set_omap_uart_info(port); \ - break; \ - } - -#define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP2(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP2UART##p) - -#define DEBUG_LL_OMAP3(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP3UART##p) - -#define DEBUG_LL_OMAP4(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP4UART##p) - -#define DEBUG_LL_OMAP5(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP5UART##p) -/* Zoom2/3 shift is different for UART1 and external port */ -#define DEBUG_LL_ZOOM(mach) \ - _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) - -#define DEBUG_LL_TI81XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - TI81XXUART##p) - -#define DEBUG_LL_AM33XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - AM33XXUART##p) - -static inline void arch_decomp_setup(void) -{ - int port = 0; - - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* omap7xx/8xx based boards using UART1 with shift 0 */ - DEBUG_LL_OMAP7XX(1, herald); - DEBUG_LL_OMAP7XX(1, omap_perseus2); - - /* omap15xx/16xx based boards using UART1 */ - DEBUG_LL_OMAP1(1, ams_delta); - DEBUG_LL_OMAP1(1, nokia770); - DEBUG_LL_OMAP1(1, omap_h2); - DEBUG_LL_OMAP1(1, omap_h3); - DEBUG_LL_OMAP1(1, omap_innovator); - DEBUG_LL_OMAP1(1, omap_osk); - DEBUG_LL_OMAP1(1, omap_palmte); - DEBUG_LL_OMAP1(1, omap_palmz71); - - /* omap15xx/16xx based boards using UART2 */ - DEBUG_LL_OMAP1(2, omap_palmtt); - - /* omap15xx/16xx based boards using UART3 */ - DEBUG_LL_OMAP1(3, sx1); - - /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap_2430sdp); - DEBUG_LL_OMAP2(1, omap_apollon); - DEBUG_LL_OMAP2(1, omap_h4); - - /* omap2 based boards using UART3 */ - DEBUG_LL_OMAP2(3, nokia_n800); - DEBUG_LL_OMAP2(3, nokia_n810); - DEBUG_LL_OMAP2(3, nokia_n810_wimax); - - /* omap3 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap3evm); - DEBUG_LL_OMAP3(1, omap_3430sdp); - DEBUG_LL_OMAP3(1, omap_3630sdp); - DEBUG_LL_OMAP3(1, omap3530_lv_som); - DEBUG_LL_OMAP3(1, omap3_torpedo); - - /* omap3 based boards using UART3 */ - DEBUG_LL_OMAP3(3, cm_t35); - DEBUG_LL_OMAP3(3, cm_t3517); - DEBUG_LL_OMAP3(3, cm_t3730); - DEBUG_LL_OMAP3(3, craneboard); - DEBUG_LL_OMAP3(3, devkit8000); - DEBUG_LL_OMAP3(3, igep0020); - DEBUG_LL_OMAP3(3, igep0030); - DEBUG_LL_OMAP3(3, nokia_rm680); - DEBUG_LL_OMAP3(3, nokia_rm696); - DEBUG_LL_OMAP3(3, nokia_rx51); - DEBUG_LL_OMAP3(3, omap3517evm); - DEBUG_LL_OMAP3(3, omap3_beagle); - DEBUG_LL_OMAP3(3, omap3_pandora); - DEBUG_LL_OMAP3(3, omap_ldp); - DEBUG_LL_OMAP3(3, overo); - DEBUG_LL_OMAP3(3, touchbook); - - /* omap4 based boards using UART3 */ - DEBUG_LL_OMAP4(3, omap_4430sdp); - DEBUG_LL_OMAP4(3, omap4_panda); - - /* omap5 based boards using UART3 */ - DEBUG_LL_OMAP5(3, omap5_sevm); - - /* zoom2/3 external uart */ - DEBUG_LL_ZOOM(omap_zoom2); - DEBUG_LL_ZOOM(omap_zoom3); - - /* TI8168 base boards using UART3 */ - DEBUG_LL_TI81XX(3, ti8168evm); - - /* TI8148 base boards using UART1 */ - DEBUG_LL_TI81XX(1, ti8148evm); - - /* AM33XX base boards using UART1 */ - DEBUG_LL_AM33XX(1, am335xevm); - } while (0); -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h deleted file mode 100644 index 87ee140fefaa..000000000000 --- a/arch/arm/plat-omap/include/plat/usb.h +++ /dev/null @@ -1,179 +0,0 @@ -// include/asm-arm/mach-omap/usb.h - -#ifndef __ASM_ARCH_OMAP_USB_H -#define __ASM_ARCH_OMAP_USB_H - -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/usb/musb.h> - -#define OMAP3_HS_USB_PORTS 3 - -enum usbhs_omap_port_mode { - OMAP_USBHS_PORT_MODE_UNUSED, - OMAP_EHCI_PORT_MODE_PHY, - OMAP_EHCI_PORT_MODE_TLL, - OMAP_EHCI_PORT_MODE_HSIC, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM -}; - -struct usbhs_omap_board_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - /* have to be valid if phy_reset is true and portx is in phy mode */ - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* Set this to true for ES2.x silicon */ - unsigned es2_compatibility:1; - - unsigned phy_reset:1; - - /* - * Regulators for USB PHYs. - * Each PHY can have a separate regulator. - */ - struct regulator *regulator[OMAP3_HS_USB_PORTS]; -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -struct ehci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - struct regulator *regulator[OMAP3_HS_USB_PORTS]; - unsigned phy_reset:1; -}; - -struct ohci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - unsigned es2_compatibility:1; -}; - -struct usbhs_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - struct ehci_hcd_omap_platform_data *ehci_data; - struct ohci_hcd_omap_platform_data *ohci_data; -}; - -struct usbtll_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; -}; -/*-------------------------------------------------------------------------*/ - -struct omap_musb_board_data { - u8 interface_type; - u8 mode; - u16 power; - unsigned extvbus:1; - void (*set_phy_power)(u8 on); - void (*clear_irq)(void); - void (*set_mode)(u8 mode); - void (*reset)(void); -}; - -enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; - -extern void usb_musb_init(struct omap_musb_board_data *board_data); - -extern void usbhs_init(const struct usbhs_omap_board_data *pdata); -extern int omap_tll_enable(void); -extern int omap_tll_disable(void); - -extern int omap4430_phy_power(struct device *dev, int ID, int on); -extern int omap4430_phy_set_clk(struct device *dev, int on); -extern int omap4430_phy_init(struct device *dev); -extern int omap4430_phy_exit(struct device *dev); -extern int omap4430_phy_suspend(struct device *dev, int suspend); - -#endif - -extern void am35x_musb_reset(void); -extern void am35x_musb_phy_power(u8 on); -extern void am35x_musb_clear_irq(void); -extern void am35x_set_mode(u8 musb_mode); -extern void ti81xx_musb_phy_power(u8 on); - -/* AM35x */ -/* USB 2.0 PHY Control */ -#define CONF2_PHY_GPIOMODE (1 << 23) -#define CONF2_OTGMODE (3 << 14) -#define CONF2_NO_OVERRIDE (0 << 14) -#define CONF2_FORCE_HOST (1 << 14) -#define CONF2_FORCE_DEVICE (2 << 14) -#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) -#define CONF2_SESENDEN (1 << 13) -#define CONF2_VBDTCTEN (1 << 12) -#define CONF2_REFFREQ_24MHZ (2 << 8) -#define CONF2_REFFREQ_26MHZ (7 << 8) -#define CONF2_REFFREQ_13MHZ (6 << 8) -#define CONF2_REFFREQ (0xf << 8) -#define CONF2_PHYCLKGD (1 << 7) -#define CONF2_VBUSSENSE (1 << 6) -#define CONF2_PHY_PLLON (1 << 5) -#define CONF2_RESET (1 << 4) -#define CONF2_PHYPWRDN (1 << 3) -#define CONF2_OTGPWRDN (1 << 2) -#define CONF2_DATPOL (1 << 1) - -/* TI81XX specific definitions */ -#define USBCTRL0 0x620 -#define USBSTAT0 0x624 - -/* TI816X PHY controls bits */ -#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) -#define TI816X_USBPHY_REFCLK_OSC (1 << 8) - -/* TI814X PHY controls bits */ -#define USBPHY_CM_PWRDN (1 << 0) -#define USBPHY_OTG_PWRDN (1 << 1) -#define USBPHY_CHGDET_DIS (1 << 2) -#define USBPHY_CHGDET_RSTRT (1 << 3) -#define USBPHY_SRCONDM (1 << 4) -#define USBPHY_SINKONDP (1 << 5) -#define USBPHY_CHGISINK_EN (1 << 6) -#define USBPHY_CHGVSRC_EN (1 << 7) -#define USBPHY_DMPULLUP (1 << 8) -#define USBPHY_DPPULLUP (1 << 9) -#define USBPHY_CDET_EXTCTL (1 << 10) -#define USBPHY_GPIO_MODE (1 << 12) -#define USBPHY_DPOPBUFCTL (1 << 13) -#define USBPHY_DMOPBUFCTL (1 << 14) -#define USBPHY_DPINPUT (1 << 15) -#define USBPHY_DMINPUT (1 << 16) -#define USBPHY_DPGPIO_PD (1 << 17) -#define USBPHY_DMGPIO_PD (1 << 18) -#define USBPHY_OTGVDET_EN (1 << 19) -#define USBPHY_OTGSESSEND_EN (1 << 20) -#define USBPHY_DATA_POLARITY (1 << 23) - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) -u32 omap1_usb0_init(unsigned nwires, unsigned is_device); -u32 omap1_usb1_init(unsigned nwires); -u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup); -#else -static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device) -{ - return 0; -} -static inline u32 omap1_usb1_init(unsigned nwires) -{ - return 0; - -} -static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h deleted file mode 100644 index 3792bdea2f6d..000000000000 --- a/arch/arm/plat-omap/include/plat/vrfb.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * VRFB Rotation Engine - * - * Copyright (C) 2009 Nokia Corporation - * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAP_VRFB_H__ -#define __OMAP_VRFB_H__ - -#define OMAP_VRFB_LINE_LEN 2048 - -struct vrfb { - u8 context; - void __iomem *vaddr[4]; - unsigned long paddr[4]; - u16 xres; - u16 yres; - u16 xoffset; - u16 yoffset; - u8 bytespp; - bool yuv_mode; -}; - -#ifdef CONFIG_OMAP2_VRFB -extern int omap_vrfb_request_ctx(struct vrfb *vrfb); -extern void omap_vrfb_release_ctx(struct vrfb *vrfb); -extern void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp); -extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); -extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); -extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, - unsigned bytespp, bool yuv_mode); -extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); -extern void omap_vrfb_restore_context(void); - -#else -static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; } -static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {} -static inline void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp) {} -static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp) - { return 0; } -static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp) - { return 0; } -static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, unsigned bytespp, bool yuv_mode) {} -static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot) - { return 0; } -static inline void omap_vrfb_restore_context(void) {} -#endif -#endif /* __VRFB_H */ diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c deleted file mode 100644 index 9722f418ae1f..000000000000 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ /dev/null @@ -1,372 +0,0 @@ -/* - * omap-pm-noop.c - OMAP power management interface - dummy version - * - * This code implements the OMAP power management interface to - * drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for - * debug/demonstration use, as it does nothing but printk() whenever a - * function is called (when DEBUG is defined, below) - * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation - * Paul Walmsley - * - * Interface developed by (in alphabetical order): - * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan - * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff - */ - -#undef DEBUG - -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/platform_device.h> - -/* Interface documentation is in mach/omap-pm.h */ -#include <plat/omap-pm.h> -#include <plat/omap_device.h> - -static bool off_mode_enabled; -static int dummy_context_loss_counter; - -/* - * Device-driver-originated constraints (via board-*.c files) - */ - -int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) -{ - if (!dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux, this needs to map the MPU to a - * powerdomain, then go through the list of current max lat - * constraints on the MPU and find the smallest. If - * the latency constraint has changed, the code should - * recompute the state to enter for the next powerdomain - * state. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) -{ - if (!dev || (agent_id != OCP_INITIATOR_AGENT && - agent_id != OCP_TARGET_AGENT)) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (r == 0) - pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n", - dev_name(dev), agent_id); - else - pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n", - dev_name(dev), agent_id, r); - - /* - * This code should model the interconnect and compute the - * required clock frequency, convert that to a VDD2 OPP ID, then - * set the VDD2 OPP appropriately. - * - * TI CDP code can call constraint_set here on the VDD2 OPP. - */ - - return 0; -} - -int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, - long t) -{ - if (!req_dev || !dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max device latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux, this needs to map the device to a - * powerdomain, then go through the list of current max lat - * constraints on that powerdomain and find the smallest. If - * the latency constraint has changed, the code should - * recompute the state to enter for the next powerdomain - * state. Conceivably, this code should also determine - * whether to actually disable the device clocks or not, - * depending on how long it takes to re-enable the clocks. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_max_sdma_lat(struct device *dev, long t) -{ - if (!dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux PM QOS params, this code should scan the - * list of maximum CPU and DMA latencies and select the - * smallest, then set cpu_dma_latency pm_qos_param - * accordingly. - * - * For future Linux PM QOS params, with separate CPU and DMA - * latency params, this code should just set the dma_latency param. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r) -{ - if (!dev || !c || r < 0) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (r == 0) - pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n", - dev_name(dev), r); - - /* - * Code in a real implementation should keep track of these - * constraints on the clock, and determine the highest minimum - * clock rate. It should iterate over each OPP and determine - * whether the OPP will result in a clock rate that would - * satisfy this constraint (and any other PM constraint in effect - * at that time). Once it finds the lowest-voltage OPP that - * meets those conditions, it should switch to it, or return - * an error if the code is not capable of doing so. - */ - - return 0; -} - -/* - * DSP Bridge-specific constraints - */ - -const struct omap_opp *omap_pm_dsp_get_opp_table(void) -{ - pr_debug("OMAP PM: DSP request for OPP table\n"); - - /* - * Return DSP frequency table here: The final item in the - * array should have .rate = .opp_id = 0. - */ - - return NULL; -} - -void omap_pm_dsp_set_min_opp(u8 opp_id) -{ - if (opp_id == 0) { - WARN_ON(1); - return; - } - - pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id); - - /* - * - * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we - * can just test to see which is higher, the CPU's desired OPP - * ID or the DSP's desired OPP ID, and use whichever is - * highest. - * - * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP - * rate is keyed on MPU speed, not the OPP ID. So we need to - * map the OPP ID to the MPU speed for use with clk_set_rate() - * if it is higher than the current OPP clock rate. - * - */ -} - - -u8 omap_pm_dsp_get_opp(void) -{ - pr_debug("OMAP PM: DSP requests current DSP OPP ID\n"); - - /* - * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock - * - * CDP12.14+: - * Call clk_get_rate() on the OPP custom clock, map that to an - * OPP ID using the tables defined in board-*.c/chip-*.c files. - */ - - return 0; -} - -/* - * CPUFreq-originated constraint - * - * In the future, this should be handled by custom OPP clocktype - * functions. - */ - -struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void) -{ - pr_debug("OMAP PM: CPUFreq request for frequency table\n"); - - /* - * Return CPUFreq frequency table here: loop over - * all VDD1 clkrates, pull out the mpu_ck frequencies, build - * table - */ - - return NULL; -} - -void omap_pm_cpu_set_freq(unsigned long f) -{ - if (f == 0) { - WARN_ON(1); - return; - } - - pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n", - f); - - /* - * For l-o dev tree, determine whether MPU freq or DSP OPP id - * freq is higher. Find the OPP ID corresponding to the - * higher frequency. Call clk_round_rate() and clk_set_rate() - * on the OPP custom clock. - * - * CDP should just be able to set the VDD1 OPP clock rate here. - */ -} - -unsigned long omap_pm_cpu_get_freq(void) -{ - pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n"); - - /* - * Call clk_get_rate() on the mpu_ck. - */ - - return 0; -} - -/** - * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled - * - * Intended for use only by OMAP PM core code to notify this layer - * that off mode has been enabled. - */ -void omap_pm_enable_off_mode(void) -{ - off_mode_enabled = true; -} - -/** - * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled - * - * Intended for use only by OMAP PM core code to notify this layer - * that off mode has been disabled. - */ -void omap_pm_disable_off_mode(void) -{ - off_mode_enabled = false; -} - -/* - * Device context loss tracking - */ - -#ifdef CONFIG_ARCH_OMAP2PLUS - -int omap_pm_get_dev_context_loss_count(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int count; - - if (WARN_ON(!dev)) - return -ENODEV; - - if (dev->pm_domain == &omap_device_pm_domain) { - count = omap_device_get_context_loss_count(pdev); - } else { - WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device", - dev_name(dev)); - - count = dummy_context_loss_counter; - - if (off_mode_enabled) { - count++; - /* - * Context loss count has to be a non-negative value. - * Clear the sign bit to get a value range from 0 to - * INT_MAX. - */ - count &= INT_MAX; - dummy_context_loss_counter = count; - } - } - - pr_debug("OMAP PM: context loss count for dev %s = %d\n", - dev_name(dev), count); - - return count; -} - -#else - -int omap_pm_get_dev_context_loss_count(struct device *dev) -{ - return dummy_context_loss_counter; -} - -#endif - -/* Should be called before clk framework init */ -int __init omap_pm_if_early_init(void) -{ - return 0; -} - -/* Must be called after clock framework is initialized */ -int __init omap_pm_if_init(void) -{ - return 0; -} - -void omap_pm_if_exit(void) -{ - /* Deallocate CPUFreq frequency table here */ -} - diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c deleted file mode 100644 index 7a7d1f2a65e9..000000000000 --- a/arch/arm/plat-omap/omap_device.c +++ /dev/null @@ -1,1278 +0,0 @@ -/* - * omap_device implementation - * - * Copyright (C) 2009-2010 Nokia Corporation - * Paul Walmsley, Kevin Hilman - * - * Developed in collaboration with (alphabetical order): Benoit - * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram - * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard - * Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This code provides a consistent interface for OMAP device drivers - * to control power management and interconnect properties of their - * devices. - * - * In the medium- to long-term, this code should either be - * a) implemented via arch-specific pointers in platform_data - * or - * b) implemented as a proper omap_bus/omap_device in Linux, no more - * platform_data func pointers - * - * - * Guidelines for usage by driver authors: - * - * 1. These functions are intended to be used by device drivers via - * function pointers in struct platform_data. As an example, - * omap_device_enable() should be passed to the driver as - * - * struct foo_driver_platform_data { - * ... - * int (*device_enable)(struct platform_device *pdev); - * ... - * } - * - * Note that the generic "device_enable" name is used, rather than - * "omap_device_enable". This is so other architectures can pass in their - * own enable/disable functions here. - * - * This should be populated during device setup: - * - * ... - * pdata->device_enable = omap_device_enable; - * ... - * - * 2. Drivers should first check to ensure the function pointer is not null - * before calling it, as in: - * - * if (pdata->device_enable) - * pdata->device_enable(pdev); - * - * This allows other architectures that don't use similar device_enable()/ - * device_shutdown() functions to execute normally. - * - * ... - * - * Suggested usage by device drivers: - * - * During device initialization: - * device_enable() - * - * During device idle: - * (save remaining device context if necessary) - * device_idle(); - * - * During device resume: - * device_enable(); - * (restore context if necessary) - * - * During device shutdown: - * device_shutdown() - * (device must be reinitialized at this point to use it again) - * - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/export.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/pm_runtime.h> -#include <linux/of.h> -#include <linux/notifier.h> - -#include <plat/omap_device.h> -#include <plat/omap_hwmod.h> -#include <plat/clock.h> - -/* These parameters are passed to _omap_device_{de,}activate() */ -#define USE_WAKEUP_LAT 0 -#define IGNORE_WAKEUP_LAT 1 - -static int omap_early_device_register(struct platform_device *pdev); - -static struct omap_device_pm_latency omap_default_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - } -}; - -/* Private functions */ - -/** - * _omap_device_activate - increase device readiness - * @od: struct omap_device * - * @ignore_lat: increase to latency target (0) or full readiness (1)? - * - * Increase readiness of omap_device @od (thus decreasing device - * wakeup latency, but consuming more power). If @ignore_lat is - * IGNORE_WAKEUP_LAT, make the omap_device fully active. Otherwise, - * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup - * latency is greater than the requested maximum wakeup latency, step - * backwards in the omap_device_pm_latency table to ensure the - * device's maximum wakeup latency is less than or equal to the - * requested maximum wakeup latency. Returns 0. - */ -static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) -{ - struct timespec a, b, c; - - dev_dbg(&od->pdev->dev, "omap_device: activating\n"); - - while (od->pm_lat_level > 0) { - struct omap_device_pm_latency *odpl; - unsigned long long act_lat = 0; - - od->pm_lat_level--; - - odpl = od->pm_lats + od->pm_lat_level; - - if (!ignore_lat && - (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) - break; - - read_persistent_clock(&a); - - /* XXX check return code */ - odpl->activate_func(od); - - read_persistent_clock(&b); - - c = timespec_sub(b, a); - act_lat = timespec_to_ns(&c); - - dev_dbg(&od->pdev->dev, - "omap_device: pm_lat %d: activate: elapsed time %llu nsec\n", - od->pm_lat_level, act_lat); - - if (act_lat > odpl->activate_lat) { - odpl->activate_lat_worst = act_lat; - if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { - odpl->activate_lat = act_lat; - dev_dbg(&od->pdev->dev, - "new worst case activate latency %d: %llu\n", - od->pm_lat_level, act_lat); - } else - dev_warn(&od->pdev->dev, - "activate latency %d higher than expected. (%llu > %d)\n", - od->pm_lat_level, act_lat, - odpl->activate_lat); - } - - od->dev_wakeup_lat -= odpl->activate_lat; - } - - return 0; -} - -/** - * _omap_device_deactivate - decrease device readiness - * @od: struct omap_device * - * @ignore_lat: decrease to latency target (0) or full inactivity (1)? - * - * Decrease readiness of omap_device @od (thus increasing device - * wakeup latency, but conserving power). If @ignore_lat is - * IGNORE_WAKEUP_LAT, make the omap_device fully inactive. Otherwise, - * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup - * latency is less than the requested maximum wakeup latency, step - * forwards in the omap_device_pm_latency table to ensure the device's - * maximum wakeup latency is less than or equal to the requested - * maximum wakeup latency. Returns 0. - */ -static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) -{ - struct timespec a, b, c; - - dev_dbg(&od->pdev->dev, "omap_device: deactivating\n"); - - while (od->pm_lat_level < od->pm_lats_cnt) { - struct omap_device_pm_latency *odpl; - unsigned long long deact_lat = 0; - - odpl = od->pm_lats + od->pm_lat_level; - - if (!ignore_lat && - ((od->dev_wakeup_lat + odpl->activate_lat) > - od->_dev_wakeup_lat_limit)) - break; - - read_persistent_clock(&a); - - /* XXX check return code */ - odpl->deactivate_func(od); - - read_persistent_clock(&b); - - c = timespec_sub(b, a); - deact_lat = timespec_to_ns(&c); - - dev_dbg(&od->pdev->dev, - "omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n", - od->pm_lat_level, deact_lat); - - if (deact_lat > odpl->deactivate_lat) { - odpl->deactivate_lat_worst = deact_lat; - if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { - odpl->deactivate_lat = deact_lat; - dev_dbg(&od->pdev->dev, - "new worst case deactivate latency %d: %llu\n", - od->pm_lat_level, deact_lat); - } else - dev_warn(&od->pdev->dev, - "deactivate latency %d higher than expected. (%llu > %d)\n", - od->pm_lat_level, deact_lat, - odpl->deactivate_lat); - } - - od->dev_wakeup_lat += odpl->activate_lat; - - od->pm_lat_level++; - } - - return 0; -} - -static void _add_clkdev(struct omap_device *od, const char *clk_alias, - const char *clk_name) -{ - struct clk *r; - struct clk_lookup *l; - - if (!clk_alias || !clk_name) - return; - - dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name); - - r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias); - if (!IS_ERR(r)) { - dev_warn(&od->pdev->dev, - "alias %s already exists\n", clk_alias); - clk_put(r); - return; - } - - r = clk_get(NULL, clk_name); - if (IS_ERR(r)) { - dev_err(&od->pdev->dev, - "clk_get for %s failed\n", clk_name); - return; - } - - l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev)); - if (!l) { - dev_err(&od->pdev->dev, - "clkdev_alloc for %s failed\n", clk_alias); - return; - } - - clkdev_add(l); -} - -/** - * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks - * and main clock - * @od: struct omap_device *od - * @oh: struct omap_hwmod *oh - * - * For the main clock and every optional clock present per hwmod per - * omap_device, this function adds an entry in the clkdev table of the - * form <dev-id=dev_name, con-id=role> if it does not exist already. - * - * The function is called from inside omap_device_build_ss(), after - * omap_device_register. - * - * This allows drivers to get a pointer to its optional clocks based on its role - * by calling clk_get(<dev*>, <role>). - * In the case of the main clock, a "fck" alias is used. - * - * No return value. - */ -static void _add_hwmod_clocks_clkdev(struct omap_device *od, - struct omap_hwmod *oh) -{ - int i; - - _add_clkdev(od, "fck", oh->main_clk); - - for (i = 0; i < oh->opt_clks_cnt; i++) - _add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk); -} - - -/** - * omap_device_build_from_dt - build an omap_device with multiple hwmods - * @pdev_name: name of the platform_device driver to use - * @pdev_id: this platform_device's connection ID - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * @is_early_device: should the device be registered as an early device or not - * - * Function for building an omap_device already registered from device-tree - * - * Returns 0 or PTR_ERR() on error. - */ -static int omap_device_build_from_dt(struct platform_device *pdev) -{ - struct omap_hwmod **hwmods; - struct omap_device *od; - struct omap_hwmod *oh; - struct device_node *node = pdev->dev.of_node; - const char *oh_name; - int oh_cnt, i, ret = 0; - - oh_cnt = of_property_count_strings(node, "ti,hwmods"); - if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) { - dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n"); - return -ENODEV; - } - - hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); - if (!hwmods) { - ret = -ENOMEM; - goto odbfd_exit; - } - - for (i = 0; i < oh_cnt; i++) { - of_property_read_string_index(node, "ti,hwmods", i, &oh_name); - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n", - oh_name); - ret = -EINVAL; - goto odbfd_exit1; - } - hwmods[i] = oh; - } - - od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0); - if (!od) { - dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n", - oh_name); - ret = PTR_ERR(od); - goto odbfd_exit1; - } - - /* Fix up missing resource names */ - for (i = 0; i < pdev->num_resources; i++) { - struct resource *r = &pdev->resource[i]; - - if (r->name == NULL) - r->name = dev_name(&pdev->dev); - } - - if (of_get_property(node, "ti,no_idle_on_suspend", NULL)) - omap_device_disable_idle_on_suspend(pdev); - - pdev->dev.pm_domain = &omap_device_pm_domain; - -odbfd_exit1: - kfree(hwmods); -odbfd_exit: - return ret; -} - -static int _omap_device_notifier_call(struct notifier_block *nb, - unsigned long event, void *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od; - - switch (event) { - case BUS_NOTIFY_DEL_DEVICE: - if (pdev->archdata.od) - omap_device_delete(pdev->archdata.od); - break; - case BUS_NOTIFY_ADD_DEVICE: - if (pdev->dev.of_node) - omap_device_build_from_dt(pdev); - /* fall through */ - default: - od = to_omap_device(pdev); - if (od) - od->_driver_status = event; - } - - return NOTIFY_DONE; -} - - -/* Public functions for use by core code */ - -/** - * omap_device_get_context_loss_count - get lost context count - * @od: struct omap_device * - * - * Using the primary hwmod, query the context loss count for this - * device. - * - * Callers should consider context for this device lost any time this - * function returns a value different than the value the caller got - * the last time it called this function. - * - * If any hwmods exist for the omap_device assoiated with @pdev, - * return the context loss counter for that hwmod, otherwise return - * zero. - */ -int omap_device_get_context_loss_count(struct platform_device *pdev) -{ - struct omap_device *od; - u32 ret = 0; - - od = to_omap_device(pdev); - - if (od->hwmods_cnt) - ret = omap_hwmod_get_context_loss_count(od->hwmods[0]); - - return ret; -} - -/** - * omap_device_count_resources - count number of struct resource entries needed - * @od: struct omap_device * - * - * Count the number of struct resource entries needed for this - * omap_device @od. Used by omap_device_build_ss() to determine how - * much memory to allocate before calling - * omap_device_fill_resources(). Returns the count. - */ -static int omap_device_count_resources(struct omap_device *od) -{ - int c = 0; - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - c += omap_hwmod_count_resources(od->hwmods[i]); - - pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n", - od->pdev->name, c, od->hwmods_cnt); - - return c; -} - -/** - * omap_device_fill_resources - fill in array of struct resource - * @od: struct omap_device * - * @res: pointer to an array of struct resource to be filled in - * - * Populate one or more empty struct resource pointed to by @res with - * the resource data for this omap_device @od. Used by - * omap_device_build_ss() after calling omap_device_count_resources(). - * Ideally this function would not be needed at all. If omap_device - * replaces platform_device, then we can specify our own - * get_resource()/ get_irq()/etc functions that use the underlying - * omap_hwmod information. Or if platform_device is extended to use - * subarchitecture-specific function pointers, the various - * platform_device functions can simply call omap_device internal - * functions to get device resources. Hacking around the existing - * platform_device code wastes memory. Returns 0. - */ -static int omap_device_fill_resources(struct omap_device *od, - struct resource *res) -{ - int i, r; - - for (i = 0; i < od->hwmods_cnt; i++) { - r = omap_hwmod_fill_resources(od->hwmods[i], res); - res += r; - } - - return 0; -} - -/** - * _od_fill_dma_resources - fill in array of struct resource with dma resources - * @od: struct omap_device * - * @res: pointer to an array of struct resource to be filled in - * - * Populate one or more empty struct resource pointed to by @res with - * the dma resource data for this omap_device @od. Used by - * omap_device_alloc() after calling omap_device_count_resources(). - * - * Ideally this function would not be needed at all. If we have - * mechanism to get dma resources from DT. - * - * Returns 0. - */ -static int _od_fill_dma_resources(struct omap_device *od, - struct resource *res) -{ - int i, r; - - for (i = 0; i < od->hwmods_cnt; i++) { - r = omap_hwmod_fill_dma_resources(od->hwmods[i], res); - res += r; - } - - return 0; -} - -/** - * omap_device_alloc - allocate an omap_device - * @pdev: platform_device that will be included in this omap_device - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * - * Convenience function for allocating an omap_device structure and filling - * hwmods, resources and pm_latency attributes. - * - * Returns an struct omap_device pointer or ERR_PTR() on error; - */ -struct omap_device *omap_device_alloc(struct platform_device *pdev, - struct omap_hwmod **ohs, int oh_cnt, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt) -{ - int ret = -ENOMEM; - struct omap_device *od; - struct resource *res = NULL; - int i, res_count; - struct omap_hwmod **hwmods; - - od = kzalloc(sizeof(struct omap_device), GFP_KERNEL); - if (!od) { - ret = -ENOMEM; - goto oda_exit1; - } - od->hwmods_cnt = oh_cnt; - - hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); - if (!hwmods) - goto oda_exit2; - - od->hwmods = hwmods; - od->pdev = pdev; - - res_count = omap_device_count_resources(od); - /* - * DT Boot: - * OF framework will construct the resource structure (currently - * does for MEM & IRQ resource) and we should respect/use these - * resources, killing hwmod dependency. - * If pdev->num_resources > 0, we assume that MEM & IRQ resources - * have been allocated by OF layer already (through DTB). - * - * Non-DT Boot: - * Here, pdev->num_resources = 0, and we should get all the - * resources from hwmod. - * - * TODO: Once DMA resource is available from OF layer, we should - * kill filling any resources from hwmod. - */ - if (res_count > pdev->num_resources) { - /* Allocate resources memory to account for new resources */ - res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); - if (!res) - goto oda_exit3; - - /* - * If pdev->num_resources > 0, then assume that, - * MEM and IRQ resources will only come from DT and only - * fill DMA resource from hwmod layer. - */ - if (pdev->num_resources && pdev->resource) { - dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n", - __func__, res_count); - memcpy(res, pdev->resource, - sizeof(struct resource) * pdev->num_resources); - _od_fill_dma_resources(od, &res[pdev->num_resources]); - } else { - dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n", - __func__, res_count); - omap_device_fill_resources(od, res); - } - - ret = platform_device_add_resources(pdev, res, res_count); - kfree(res); - - if (ret) - goto oda_exit3; - } - - if (!pm_lats) { - pm_lats = omap_default_latency; - pm_lats_cnt = ARRAY_SIZE(omap_default_latency); - } - - od->pm_lats_cnt = pm_lats_cnt; - od->pm_lats = kmemdup(pm_lats, - sizeof(struct omap_device_pm_latency) * pm_lats_cnt, - GFP_KERNEL); - if (!od->pm_lats) - goto oda_exit3; - - pdev->archdata.od = od; - - for (i = 0; i < oh_cnt; i++) { - hwmods[i]->od = od; - _add_hwmod_clocks_clkdev(od, hwmods[i]); - } - - return od; - -oda_exit3: - kfree(hwmods); -oda_exit2: - kfree(od); -oda_exit1: - dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret); - - return ERR_PTR(ret); -} - -void omap_device_delete(struct omap_device *od) -{ - if (!od) - return; - - od->pdev->archdata.od = NULL; - kfree(od->pm_lats); - kfree(od->hwmods); - kfree(od); -} - -/** - * omap_device_build - build and register an omap_device with one omap_hwmod - * @pdev_name: name of the platform_device driver to use - * @pdev_id: this platform_device's connection ID - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * @is_early_device: should the device be registered as an early device or not - * - * Convenience function for building and registering a single - * omap_device record, which in turn builds and registers a - * platform_device record. See omap_device_build_ss() for more - * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise, - * passes along the return value of omap_device_build_ss(). - */ -struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id, - struct omap_hwmod *oh, void *pdata, - int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device) -{ - struct omap_hwmod *ohs[] = { oh }; - - if (!oh) - return ERR_PTR(-EINVAL); - - return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata, - pdata_len, pm_lats, pm_lats_cnt, - is_early_device); -} - -/** - * omap_device_build_ss - build and register an omap_device with multiple hwmods - * @pdev_name: name of the platform_device driver to use - * @pdev_id: this platform_device's connection ID - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * @is_early_device: should the device be registered as an early device or not - * - * Convenience function for building and registering an omap_device - * subsystem record. Subsystem records consist of multiple - * omap_hwmods. This function in turn builds and registers a - * platform_device record. Returns an ERR_PTR() on error, or passes - * along the return value of omap_device_register(). - */ -struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id, - struct omap_hwmod **ohs, int oh_cnt, - void *pdata, int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device) -{ - int ret = -ENOMEM; - struct platform_device *pdev; - struct omap_device *od; - - if (!ohs || oh_cnt == 0 || !pdev_name) - return ERR_PTR(-EINVAL); - - if (!pdata && pdata_len > 0) - return ERR_PTR(-EINVAL); - - pdev = platform_device_alloc(pdev_name, pdev_id); - if (!pdev) { - ret = -ENOMEM; - goto odbs_exit; - } - - /* Set the dev_name early to allow dev_xxx in omap_device_alloc */ - if (pdev->id != -1) - dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); - else - dev_set_name(&pdev->dev, "%s", pdev->name); - - od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt); - if (IS_ERR(od)) - goto odbs_exit1; - - ret = platform_device_add_data(pdev, pdata, pdata_len); - if (ret) - goto odbs_exit2; - - if (is_early_device) - ret = omap_early_device_register(pdev); - else - ret = omap_device_register(pdev); - if (ret) - goto odbs_exit2; - - return pdev; - -odbs_exit2: - omap_device_delete(od); -odbs_exit1: - platform_device_put(pdev); -odbs_exit: - - pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret); - - return ERR_PTR(ret); -} - -/** - * omap_early_device_register - register an omap_device as an early platform - * device. - * @od: struct omap_device * to register - * - * Register the omap_device structure. This currently just calls - * platform_early_add_device() on the underlying platform_device. - * Returns 0 by default. - */ -static int __init omap_early_device_register(struct platform_device *pdev) -{ - struct platform_device *devices[1]; - - devices[0] = pdev; - early_platform_add_devices(devices, 1); - return 0; -} - -#ifdef CONFIG_PM_RUNTIME -static int _od_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int ret; - - ret = pm_generic_runtime_suspend(dev); - - if (!ret) - omap_device_idle(pdev); - - return ret; -} - -static int _od_runtime_idle(struct device *dev) -{ - return pm_generic_runtime_idle(dev); -} - -static int _od_runtime_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - - omap_device_enable(pdev); - - return pm_generic_runtime_resume(dev); -} -#endif - -#ifdef CONFIG_SUSPEND -static int _od_suspend_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - int ret; - - /* Don't attempt late suspend on a driver that is not bound */ - if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) - return 0; - - ret = pm_generic_suspend_noirq(dev); - - if (!ret && !pm_runtime_status_suspended(dev)) { - if (pm_generic_runtime_suspend(dev) == 0) { - if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)) - omap_device_idle(pdev); - od->flags |= OMAP_DEVICE_SUSPENDED; - } - } - - return ret; -} - -static int _od_resume_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - if ((od->flags & OMAP_DEVICE_SUSPENDED) && - !pm_runtime_status_suspended(dev)) { - od->flags &= ~OMAP_DEVICE_SUSPENDED; - if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)) - omap_device_enable(pdev); - pm_generic_runtime_resume(dev); - } - - return pm_generic_resume_noirq(dev); -} -#else -#define _od_suspend_noirq NULL -#define _od_resume_noirq NULL -#endif - -struct dev_pm_domain omap_device_pm_domain = { - .ops = { - SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, - _od_runtime_idle) - USE_PLATFORM_PM_SLEEP_OPS - .suspend_noirq = _od_suspend_noirq, - .resume_noirq = _od_resume_noirq, - } -}; - -/** - * omap_device_register - register an omap_device with one omap_hwmod - * @od: struct omap_device * to register - * - * Register the omap_device structure. This currently just calls - * platform_device_register() on the underlying platform_device. - * Returns the return value of platform_device_register(). - */ -int omap_device_register(struct platform_device *pdev) -{ - pr_debug("omap_device: %s: registering\n", pdev->name); - - pdev->dev.pm_domain = &omap_device_pm_domain; - return platform_device_add(pdev); -} - - -/* Public functions for use by device drivers through struct platform_data */ - -/** - * omap_device_enable - fully activate an omap_device - * @od: struct omap_device * to activate - * - * Do whatever is necessary for the hwmods underlying omap_device @od - * to be accessible and ready to operate. This generally involves - * enabling clocks, setting SYSCONFIG registers; and in the future may - * involve remuxing pins. Device drivers should call this function - * (through platform_data function pointers) where they would normally - * enable clocks, etc. Returns -EINVAL if called when the omap_device - * is already enabled, or passes along the return value of - * _omap_device_activate(). - */ -int omap_device_enable(struct platform_device *pdev) -{ - int ret; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (od->_state == OMAP_DEVICE_STATE_ENABLED) { - dev_warn(&pdev->dev, - "omap_device: %s() called from invalid state %d\n", - __func__, od->_state); - return -EINVAL; - } - - /* Enable everything if we're enabling this device from scratch */ - if (od->_state == OMAP_DEVICE_STATE_UNKNOWN) - od->pm_lat_level = od->pm_lats_cnt; - - ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT); - - od->dev_wakeup_lat = 0; - od->_dev_wakeup_lat_limit = UINT_MAX; - od->_state = OMAP_DEVICE_STATE_ENABLED; - - return ret; -} - -/** - * omap_device_idle - idle an omap_device - * @od: struct omap_device * to idle - * - * Idle omap_device @od by calling as many .deactivate_func() entries - * in the omap_device's pm_lats table as is possible without exceeding - * the device's maximum wakeup latency limit, pm_lat_limit. Device - * drivers should call this function (through platform_data function - * pointers) where they would normally disable clocks after operations - * complete, etc.. Returns -EINVAL if the omap_device is not - * currently enabled, or passes along the return value of - * _omap_device_deactivate(). - */ -int omap_device_idle(struct platform_device *pdev) -{ - int ret; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (od->_state != OMAP_DEVICE_STATE_ENABLED) { - dev_warn(&pdev->dev, - "omap_device: %s() called from invalid state %d\n", - __func__, od->_state); - return -EINVAL; - } - - ret = _omap_device_deactivate(od, USE_WAKEUP_LAT); - - od->_state = OMAP_DEVICE_STATE_IDLE; - - return ret; -} - -/** - * omap_device_shutdown - shut down an omap_device - * @od: struct omap_device * to shut down - * - * Shut down omap_device @od by calling all .deactivate_func() entries - * in the omap_device's pm_lats table and then shutting down all of - * the underlying omap_hwmods. Used when a device is being "removed" - * or a device driver is being unloaded. Returns -EINVAL if the - * omap_device is not currently enabled or idle, or passes along the - * return value of _omap_device_deactivate(). - */ -int omap_device_shutdown(struct platform_device *pdev) -{ - int ret, i; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (od->_state != OMAP_DEVICE_STATE_ENABLED && - od->_state != OMAP_DEVICE_STATE_IDLE) { - dev_warn(&pdev->dev, - "omap_device: %s() called from invalid state %d\n", - __func__, od->_state); - return -EINVAL; - } - - ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT); - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_shutdown(od->hwmods[i]); - - od->_state = OMAP_DEVICE_STATE_SHUTDOWN; - - return ret; -} - -/** - * omap_device_assert_hardreset - set a device's hardreset line - * @pdev: struct platform_device * to reset - * @name: const char * name of the reset line - * - * Set the hardreset line identified by @name on the IP blocks - * associated with the hwmods backing the platform_device @pdev. All - * of the hwmods associated with @pdev must have the same hardreset - * line linked to them for this to work. Passes along the return value - * of omap_hwmod_assert_hardreset() in the event of any failure, or - * returns 0 upon success. - */ -int omap_device_assert_hardreset(struct platform_device *pdev, const char *name) -{ - struct omap_device *od = to_omap_device(pdev); - int ret = 0; - int i; - - for (i = 0; i < od->hwmods_cnt; i++) { - ret = omap_hwmod_assert_hardreset(od->hwmods[i], name); - if (ret) - break; - } - - return ret; -} - -/** - * omap_device_deassert_hardreset - release a device's hardreset line - * @pdev: struct platform_device * to reset - * @name: const char * name of the reset line - * - * Release the hardreset line identified by @name on the IP blocks - * associated with the hwmods backing the platform_device @pdev. All - * of the hwmods associated with @pdev must have the same hardreset - * line linked to them for this to work. Passes along the return - * value of omap_hwmod_deassert_hardreset() in the event of any - * failure, or returns 0 upon success. - */ -int omap_device_deassert_hardreset(struct platform_device *pdev, - const char *name) -{ - struct omap_device *od = to_omap_device(pdev); - int ret = 0; - int i; - - for (i = 0; i < od->hwmods_cnt; i++) { - ret = omap_hwmod_deassert_hardreset(od->hwmods[i], name); - if (ret) - break; - } - - return ret; -} - -/** - * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim - * @od: struct omap_device * - * - * When a device's maximum wakeup latency limit changes, call some of - * the .activate_func or .deactivate_func function pointers in the - * omap_device's pm_lats array to ensure that the device's maximum - * wakeup latency is less than or equal to the new latency limit. - * Intended to be called by OMAP PM code whenever a device's maximum - * wakeup latency limit changes (e.g., via - * omap_pm_set_dev_wakeup_lat()). Returns 0 if nothing needs to be - * done (e.g., if the omap_device is not currently idle, or if the - * wakeup latency is already current with the new limit) or passes - * along the return value of _omap_device_deactivate() or - * _omap_device_activate(). - */ -int omap_device_align_pm_lat(struct platform_device *pdev, - u32 new_wakeup_lat_limit) -{ - int ret = -EINVAL; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (new_wakeup_lat_limit == od->dev_wakeup_lat) - return 0; - - od->_dev_wakeup_lat_limit = new_wakeup_lat_limit; - - if (od->_state != OMAP_DEVICE_STATE_IDLE) - return 0; - else if (new_wakeup_lat_limit > od->dev_wakeup_lat) - ret = _omap_device_deactivate(od, USE_WAKEUP_LAT); - else if (new_wakeup_lat_limit < od->dev_wakeup_lat) - ret = _omap_device_activate(od, USE_WAKEUP_LAT); - - return ret; -} - -/** - * omap_device_get_pwrdm - return the powerdomain * associated with @od - * @od: struct omap_device * - * - * Return the powerdomain associated with the first underlying - * omap_hwmod for this omap_device. Intended for use by core OMAP PM - * code. Returns NULL on error or a struct powerdomain * upon - * success. - */ -struct powerdomain *omap_device_get_pwrdm(struct omap_device *od) -{ - /* - * XXX Assumes that all omap_hwmod powerdomains are identical. - * This may not necessarily be true. There should be a sanity - * check in here to WARN() if any difference appears. - */ - if (!od->hwmods_cnt) - return NULL; - - return omap_hwmod_get_pwrdm(od->hwmods[0]); -} - -/** - * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base - * @od: struct omap_device * - * - * Return the MPU's virtual address for the base of the hwmod, from - * the ioremap() that the hwmod code does. Only valid if there is one - * hwmod associated with this device. Returns NULL if there are zero - * or more than one hwmods associated with this omap_device; - * otherwise, passes along the return value from - * omap_hwmod_get_mpu_rt_va(). - */ -void __iomem *omap_device_get_rt_va(struct omap_device *od) -{ - if (od->hwmods_cnt != 1) - return NULL; - - return omap_hwmod_get_mpu_rt_va(od->hwmods[0]); -} - -/** - * omap_device_get_by_hwmod_name() - convert a hwmod name to - * device pointer. - * @oh_name: name of the hwmod device - * - * Returns back a struct device * pointer associated with a hwmod - * device represented by a hwmod_name - */ -struct device *omap_device_get_by_hwmod_name(const char *oh_name) -{ - struct omap_hwmod *oh; - - if (!oh_name) { - WARN(1, "%s: no hwmod name!\n", __func__); - return ERR_PTR(-EINVAL); - } - - oh = omap_hwmod_lookup(oh_name); - if (IS_ERR_OR_NULL(oh)) { - WARN(1, "%s: no hwmod for %s\n", __func__, - oh_name); - return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV); - } - if (IS_ERR_OR_NULL(oh->od)) { - WARN(1, "%s: no omap_device for %s\n", __func__, - oh_name); - return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV); - } - - if (IS_ERR_OR_NULL(oh->od->pdev)) - return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV); - - return &oh->od->pdev->dev; -} -EXPORT_SYMBOL(omap_device_get_by_hwmod_name); - -/* - * Public functions intended for use in omap_device_pm_latency - * .activate_func and .deactivate_func function pointers - */ - -/** - * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods - * @od: struct omap_device *od - * - * Enable all underlying hwmods. Returns 0. - */ -int omap_device_enable_hwmods(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_enable(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -/** - * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods - * @od: struct omap_device *od - * - * Idle all underlying hwmods. Returns 0. - */ -int omap_device_idle_hwmods(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_idle(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -/** - * omap_device_disable_clocks - disable all main and interface clocks - * @od: struct omap_device *od - * - * Disable the main functional clock and interface clock for all of the - * omap_hwmods associated with the omap_device. Returns 0. - */ -int omap_device_disable_clocks(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_disable_clocks(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -/** - * omap_device_enable_clocks - enable all main and interface clocks - * @od: struct omap_device *od - * - * Enable the main functional clock and interface clock for all of the - * omap_hwmods associated with the omap_device. Returns 0. - */ -int omap_device_enable_clocks(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_enable_clocks(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -static struct notifier_block platform_nb = { - .notifier_call = _omap_device_notifier_call, -}; - -static int __init omap_device_init(void) -{ - bus_register_notifier(&platform_bus_type, &platform_nb); - return 0; -} -core_initcall(omap_device_init); - -/** - * omap_device_late_idle - idle devices without drivers - * @dev: struct device * associated with omap_device - * @data: unused - * - * Check the driver bound status of this device, and idle it - * if there is no driver attached. - */ -static int __init omap_device_late_idle(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - if (!od) - return 0; - - /* - * If omap_device state is enabled, but has no driver bound, - * idle it. - */ - if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { - if (od->_state == OMAP_DEVICE_STATE_ENABLED) { - dev_warn(dev, "%s: enabled but no driver. Idling\n", - __func__); - omap_device_idle(pdev); - } - } - - return 0; -} - -static int __init omap_device_late_init(void) -{ - bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle); - return 0; -} -late_initcall(omap_device_late_init); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 28acb383e7df..743fc2836f7a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,198 +20,20 @@ #include <linux/init.h> #include <linux/io.h> +#include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include <plat/sram.h> -#include <plat/cpu.h> - -#include "sram.h" - -/* XXX These "sideways" includes will disappear when sram.c becomes a driver */ -#include "../mach-omap2/iomap.h" -#include "../mach-omap2/prm2xxx_3xxx.h" -#include "../mach-omap2/sdrc.h" - -#define OMAP1_SRAM_PA 0x20000000 -#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) -#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA -#else -#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#endif -#define OMAP5_SRAM_PA 0x40300000 - -#if defined(CONFIG_ARCH_OMAP2PLUS) -#define SRAM_BOOTLOADER_SZ 0x00 -#else -#define SRAM_BOOTLOADER_SZ 0x80 -#endif - -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) - -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) - -#define GP_DEVICE 0x300 - #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) -static unsigned long omap_sram_start; static void __iomem *omap_sram_base; static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; /* - * Depending on the target RAMFS firewall setup, the public usable amount of - * SRAM varies. The default accessible size for all device types is 2k. A GP - * device allows ARM11 but not other initiators for full size. This - * functionality seems ok until some nice security API happens. - */ -static int is_sram_locked(void) -{ - if (OMAP2_DEVICE_TYPE_GP == omap_type()) { - /* RAMFW: R/W access to all initiators for all qualifier sets */ - if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ - } - if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); - } - return 0; - } else - return 1; /* assume locked with no PPA or security driver */ -} - -/* - * The amount of SRAM depends on the core type. - * Note that we cannot try to test for SRAM here because writes - * to secure SRAM will hang the system. Also the SRAM is not - * yet mapped at this point. - */ -static void __init omap_detect_sram(void) -{ - omap_sram_skip = SRAM_BOOTLOADER_SZ; - if (cpu_class_is_omap2()) { - if (is_sram_locked()) { - if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PUB_PA; - if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || - (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { - omap_sram_size = 0x7000; /* 28K */ - omap_sram_skip += SZ_16K; - } else { - omap_sram_size = 0x8000; /* 32K */ - } - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PUB_PA; - omap_sram_size = 0xa000; /* 40K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PUB_PA; - omap_sram_size = 0x800; /* 2K */ - } - } else { - if (soc_is_am33xx()) { - omap_sram_start = AM33XX_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0xe000; /* 56K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PA; - if (cpu_is_omap242x()) - omap_sram_size = 0xa0000; /* 640K */ - else if (cpu_is_omap243x()) - omap_sram_size = 0x10000; /* 64K */ - } - } - } else { - omap_sram_start = OMAP1_SRAM_PA; - - if (cpu_is_omap7xx()) - omap_sram_size = 0x32000; /* 200K */ - else if (cpu_is_omap15xx()) - omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1611() || - cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; /* 16K */ - else { - pr_err("Could not detect SRAM size\n"); - omap_sram_size = 0x4000; - } - } -} - -/* - * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. - */ -static void __init omap_map_sram(void) -{ - int cached = 1; - - if (omap_sram_size == 0) - return; - -#ifdef CONFIG_OMAP4_ERRATA_I688 - if (cpu_is_omap44xx()) { - omap_sram_start += PAGE_SIZE; - omap_sram_size -= SZ_16K; - } -#endif - if (cpu_is_omap34xx()) { - /* - * SRAM must be marked as non-cached on OMAP3 since the - * CORE DPLL M2 divider change code (in SRAM) runs with the - * SDRAM controller disabled, and if it is marked cached, - * the ARM may attempt to write cache lines back to SDRAM - * which will cause the system to hang. - */ - cached = 0; - } - - omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); - omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, - cached); - if (!omap_sram_base) { - pr_err("SRAM: Could not map\n"); - return; - } - - omap_sram_ceil = omap_sram_base + omap_sram_size; - - /* - * Looks like we need to preserve some bootloader code at the - * beginning of SRAM for jumping to flash for reboot to work... - */ - memset_io(omap_sram_base + omap_sram_skip, 0, - omap_sram_size - omap_sram_skip); -} - -/* * Memory allocator for SRAM: calculates the new ceiling address * for pushing a function using the fncpy API. * @@ -236,171 +58,39 @@ void *omap_sram_push_address(unsigned long size) return (void *)omap_sram_ceil; } -#ifdef CONFIG_ARCH_OMAP1 - -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - BUG_ON(!_omap_sram_reprogram_clock); - /* On 730, bit 13 must always be 1 */ - if (cpu_is_omap7xx()) - ckctl |= 0x2000; - _omap_sram_reprogram_clock(dpllctl, ckctl); -} - -static int __init omap1_sram_init(void) -{ - _omap_sram_reprogram_clock = - omap_sram_push(omap1_sram_reprogram_clock, - omap1_sram_reprogram_clock_sz); - - return 0; -} - -#else -#define omap1_sram_init() do {} while (0) -#endif - -#if defined(CONFIG_ARCH_OMAP2) - -static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); - -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ - BUG_ON(!_omap2_sram_ddr_init); - _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, - base_cs, force_unlock); -} - -static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, - u32 mem_type); - -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) -{ - BUG_ON(!_omap2_sram_reprogram_sdrc); - _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); -} - -static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) -{ - BUG_ON(!_omap2_set_prcm); - return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); -} -#endif - -#ifdef CONFIG_SOC_OMAP2420 -static int __init omap242x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, - omap242x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, - omap242x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, - omap242x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap242x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -static int __init omap243x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, - omap243x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, - omap243x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, - omap243x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap243x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 - -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - -void omap3_sram_restore_context(void) +/* + * The SRAM context is lost during off-idle and stack + * needs to be reset. + */ +void omap_sram_reset(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); } -static inline int omap34xx_sram_init(void) -{ - omap3_sram_restore_context(); - return 0; -} -#else -static inline int omap34xx_sram_init(void) -{ - return 0; -} -#endif /* CONFIG_ARCH_OMAP3 */ - -static inline int am33xx_sram_init(void) +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +void __init omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached) { - return 0; -} + if (size == 0) + return; -int __init omap_sram_init(void) -{ - omap_detect_sram(); - omap_map_sram(); + start = ROUND_DOWN(start, PAGE_SIZE); + omap_sram_size = size; + omap_sram_skip = skip; + omap_sram_base = __arm_ioremap_exec(start, size, cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } - if (!(cpu_class_is_omap2())) - omap1_sram_init(); - else if (cpu_is_omap242x()) - omap242x_sram_init(); - else if (cpu_is_omap2430()) - omap243x_sram_init(); - else if (soc_is_am33xx()) - am33xx_sram_init(); - else if (cpu_is_omap34xx()) - omap34xx_sram_init(); + omap_sram_reset(); - return 0; + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h deleted file mode 100644 index 29b43ef97f20..000000000000 --- a/arch/arm/plat-omap/sram.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __PLAT_OMAP_SRAM_H__ -#define __PLAT_OMAP_SRAM_H__ - -extern int __init omap_sram_init(void); - -#endif /* __PLAT_OMAP_SRAM_H__ */ |
