diff options
Diffstat (limited to 'arch/arm/mach-ux500')
46 files changed, 1456 insertions, 3169 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index ef7099eea0f2..c013bbf79cac 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -9,10 +9,8 @@ config UX500_SOC_COMMON select ARM_ERRATA_754322 select ARM_ERRATA_764369 select CACHE_L2X0 - -config UX500_SOC_DB5500 - bool - select MFD_DB5500_PRCMU + select PINCTRL + select PINCTRL_NOMADIK config UX500_SOC_DB8500 bool @@ -20,6 +18,7 @@ config UX500_SOC_DB8500 select REGULATOR select REGULATOR_DB8500_PRCMU select CPU_FREQ_TABLE if CPU_FREQ + select PINCTRL_DB8500 menu "Ux500 target platform (boards)" @@ -42,18 +41,12 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 + select LEDS_GPIO help Include support for the snowball development platform. -config MACH_U5500 - bool "U5500 Development platform" - select UX500_SOC_DB5500 - help - Include support for the U5500 development platform. - config UX500_AUTO_PLATFORM def_bool y - depends on !MACH_U5500 select MACH_MOP500 help At least one platform needs to be selected in order to build @@ -74,18 +67,4 @@ config UX500_DEBUG_UART Choose the UART on which kernel low-level debug messages should be output. -config U5500_MODEM_IRQ - bool "Modem IRQ support" - depends on UX500_SOC_DB5500 - default y - help - Add support for handling IRQ:s from modem side - -config U5500_MBOX - bool "Mailbox support" - depends on U5500_MODEM_IRQ - default y - help - Add support for U5500 mailbox communication with modem side - endif diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 465b9ec9510a..026086ff9e6c 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -4,17 +4,14 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ id.o usb.o timer.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o -obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ - board-mop500-pins.o -obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o + board-mop500-pins.o \ + board-mop500-msp.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o -obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o - diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c new file mode 100644 index 000000000000..996048038743 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -0,0 +1,267 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/pinctrl/consumer.h> + +#include <plat/gpio-nomadik.h> +#include <plat/pincfg.h> +#include <plat/ste_dma40.h> + +#include <mach/devices.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/msp.h> + +#include "ste-dma40-db8500.h" +#include "board-mop500.h" +#include "devices-db8500.h" +#include "pins-db8500.h" + +/* MSP1/3 Tx/Rx usage protection */ +static DEFINE_SPINLOCK(msp_rxtx_lock); + +/* Reference Count */ +static int msp_rxtx_ref; + +/* Pin modes */ +struct pinctrl *msp1_p; +struct pinctrl_state *msp1_def; +struct pinctrl_state *msp1_sleep; + +int msp13_i2s_init(void) +{ + int retval = 0; + unsigned long flags; + + spin_lock_irqsave(&msp_rxtx_lock, flags); + if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) { + retval = pinctrl_select_state(msp1_p, msp1_def); + if (retval) + pr_err("could not set MSP1 defstate\n"); + } + if (!retval) + msp_rxtx_ref++; + spin_unlock_irqrestore(&msp_rxtx_lock, flags); + + return retval; +} + +int msp13_i2s_exit(void) +{ + int retval = 0; + unsigned long flags; + + spin_lock_irqsave(&msp_rxtx_lock, flags); + WARN_ON(!msp_rxtx_ref); + msp_rxtx_ref--; + if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) { + retval = pinctrl_select_state(msp1_p, msp1_sleep); + if (retval) + pr_err("could not set MSP1 sleepstate\n"); + } + spin_unlock_irqrestore(&msp_rxtx_lock, flags); + + return retval; +} + +static struct stedma40_chan_cfg msp0_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp0_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct msp_i2s_platform_data msp0_platform_data = { + .id = MSP_I2S_0, + .msp_i2s_dma_rx = &msp0_dma_rx, + .msp_i2s_dma_tx = &msp0_dma_tx, +}; + +static struct stedma40_chan_cfg msp1_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV30_MSP3_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp1_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct msp_i2s_platform_data msp1_platform_data = { + .id = MSP_I2S_1, + .msp_i2s_dma_rx = NULL, + .msp_i2s_dma_tx = &msp1_dma_tx, + .msp_i2s_init = msp13_i2s_init, + .msp_i2s_exit = msp13_i2s_exit, +}; + +static struct stedma40_chan_cfg msp2_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV14_MSP2_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ + .src_info.psize = STEDMA40_PSIZE_LOG_1, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp2_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + .use_fixed_channel = true, + .phy_channel = 1, + + /* data_width is set during configuration */ +}; + +static struct platform_device *db8500_add_msp_i2s(struct device *parent, + int id, + resource_size_t base, int irq, + struct msp_i2s_platform_data *pdata) +{ + struct platform_device *pdev; + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_4K), + DEFINE_RES_IRQ(irq), + }; + + pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n", + id, irq); + pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); + if (!pdev) { + pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", + id); + return NULL; + } + + return pdev; +} + +/* Platform device for ASoC U8500 machine */ +static struct platform_device snd_soc_u8500 = { + .name = "snd-soc-u8500", + .id = 0, + .dev = { + .platform_data = NULL, + }, +}; + +/* Platform device for Ux500-PCM */ +static struct platform_device ux500_pcm = { + .name = "ux500-pcm", + .id = 0, + .dev = { + .platform_data = NULL, + }, +}; + +static struct msp_i2s_platform_data msp2_platform_data = { + .id = MSP_I2S_2, + .msp_i2s_dma_rx = &msp2_dma_rx, + .msp_i2s_dma_tx = &msp2_dma_tx, +}; + +static struct msp_i2s_platform_data msp3_platform_data = { + .id = MSP_I2S_3, + .msp_i2s_dma_rx = &msp1_dma_rx, + .msp_i2s_dma_tx = NULL, + .msp_i2s_init = msp13_i2s_init, + .msp_i2s_exit = msp13_i2s_exit, +}; + +int mop500_msp_init(struct device *parent) +{ + struct platform_device *msp1; + + pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); + platform_device_register(&snd_soc_u8500); + + pr_info("Initialize MSP I2S-devices.\n"); + db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, + &msp0_platform_data); + msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, + &msp1_platform_data); + db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, + &msp2_platform_data); + db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, + &msp3_platform_data); + + /* Get the pinctrl handle for MSP1 */ + if (msp1) { + msp1_p = pinctrl_get(&msp1->dev); + if (IS_ERR(msp1_p)) + dev_err(&msp1->dev, "could not get MSP1 pinctrl\n"); + else { + msp1_def = pinctrl_lookup_state(msp1_p, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(msp1_def)) { + dev_err(&msp1->dev, + "could not get MSP1 defstate\n"); + } + msp1_sleep = pinctrl_lookup_state(msp1_p, + PINCTRL_STATE_SLEEP); + if (IS_ERR(msp1_sleep)) + dev_err(&msp1->dev, + "could not get MSP1 idlestate\n"); + } + } + + pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); + platform_device_register(&ux500_pcm); + + return 0; +} diff --git a/arch/arm/mach-ux500/board-mop500-msp.h b/arch/arm/mach-ux500/board-mop500-msp.h new file mode 100644 index 000000000000..6fcfb5e2cc94 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-msp.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Ola Lilja <ola.o.lilja@stericsson.com>, + * for ST-Ericsson. + * + * License terms: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +void mop500_msp_init(struct device *parent); diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index f5413dca532c..32fd99204464 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -7,299 +7,508 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/bug.h> +#include <linux/string.h> +#include <linux/pinctrl/machine.h> #include <asm/mach-types.h> #include <plat/pincfg.h> #include <plat/gpio-nomadik.h> + #include <mach/hardware.h> #include "pins-db8500.h" +#include "board-mop500.h" -static pin_cfg_t mop500_pins_common[] = { - /* I2C */ - GPIO147_I2C0_SCL, - GPIO148_I2C0_SDA, - GPIO16_I2C1_SCL, - GPIO17_I2C1_SDA, - GPIO10_I2C2_SDA, - GPIO11_I2C2_SCL, - GPIO229_I2C3_SDA, - GPIO230_I2C3_SCL, - - /* MSP0 */ - GPIO12_MSP0_TXD, - GPIO13_MSP0_TFS, - GPIO14_MSP0_TCK, - GPIO15_MSP0_RXD, - - /* MSP2: HDMI */ - GPIO193_MSP2_TXD, - GPIO194_MSP2_TCK, - GPIO195_MSP2_TFS, - GPIO196_MSP2_RXD | PIN_OUTPUT_LOW, - - /* Touch screen INTERFACE */ - GPIO84_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT1 */ - - /* STMPE1601/tc35893 keypad IRQ */ - GPIO218_GPIO | PIN_INPUT_PULLUP, - - /* MMC0 (MicroSD card) */ - GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH, - GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH, - GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH, - - GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL, - GPIO23_MC0_CLK | PIN_OUTPUT_LOW, - GPIO24_MC0_CMD | PIN_INPUT_PULLUP, - GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP, - GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP, - GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP, - GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP, - - /* SDI1 (SDIO) */ - GPIO208_MC1_CLK | PIN_OUTPUT_LOW, - GPIO209_MC1_FBCLK | PIN_INPUT_NOPULL, - GPIO210_MC1_CMD | PIN_INPUT_PULLUP, - GPIO211_MC1_DAT0 | PIN_INPUT_PULLUP, - GPIO212_MC1_DAT1 | PIN_INPUT_PULLUP, - GPIO213_MC1_DAT2 | PIN_INPUT_PULLUP, - GPIO214_MC1_DAT3 | PIN_INPUT_PULLUP, - - /* MMC2 (On-board DATA INTERFACE eMMC) */ - GPIO128_MC2_CLK | PIN_OUTPUT_LOW, - GPIO129_MC2_CMD | PIN_INPUT_PULLUP, - GPIO130_MC2_FBCLK | PIN_INPUT_NOPULL, - GPIO131_MC2_DAT0 | PIN_INPUT_PULLUP, - GPIO132_MC2_DAT1 | PIN_INPUT_PULLUP, - GPIO133_MC2_DAT2 | PIN_INPUT_PULLUP, - GPIO134_MC2_DAT3 | PIN_INPUT_PULLUP, - GPIO135_MC2_DAT4 | PIN_INPUT_PULLUP, - GPIO136_MC2_DAT5 | PIN_INPUT_PULLUP, - GPIO137_MC2_DAT6 | PIN_INPUT_PULLUP, - GPIO138_MC2_DAT7 | PIN_INPUT_PULLUP, - - /* MMC4 (On-board STORAGE INTERFACE eMMC) */ - GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP, - GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP, - GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP, - GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP, - GPIO201_MC4_CMD | PIN_INPUT_PULLUP, - GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL, - GPIO203_MC4_CLK | PIN_OUTPUT_LOW, - GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP, - GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP, - GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP, - GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP, - - /* SKE keypad */ - GPIO153_KP_I7, - GPIO154_KP_I6, - GPIO155_KP_I5, - GPIO156_KP_I4, - GPIO157_KP_O7, - GPIO158_KP_O6, - GPIO159_KP_O5, - GPIO160_KP_O4, - GPIO161_KP_I3, - GPIO162_KP_I2, - GPIO163_KP_I1, - GPIO164_KP_I0, - GPIO165_KP_O3, - GPIO166_KP_O2, - GPIO167_KP_O1, - GPIO168_KP_O0, +enum custom_pin_cfg_t { + PINS_FOR_DEFAULT, + PINS_FOR_U9500, +}; - /* UART */ - /* uart-0 pins gpio configuration should be - * kept intact to prevent glitch in tx line - * when tty dev is opened. Later these pins +static enum custom_pin_cfg_t pinsfor; + +/* These simply sets bias for pins */ +#define BIAS(a,b) static unsigned long a[] = { b } + +BIAS(pd, PIN_PULL_DOWN); +BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); +BIAS(in_nopull, PIN_INPUT_NOPULL); +BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); +BIAS(in_pu, PIN_INPUT_PULLUP); +BIAS(in_pd, PIN_INPUT_PULLDOWN); +BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP); +BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW); +BIAS(out_hi, PIN_OUTPUT_HIGH); +BIAS(out_lo, PIN_OUTPUT_LOW); +BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); +/* These also force them into GPIO mode */ +BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); +BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED); +BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); +BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); +BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); +BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); +/* Sleep modes */ +BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE); +BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); +BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); + +/* We use these to define hog settings that are always done on boot */ +#define DB8500_MUX_HOG(group,func) \ + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func) +#define DB8500_PIN_HOG(pin,conf) \ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf) + +/* These are default states associated with device and changed runtime */ +#define DB8500_MUX(group,func,dev) \ + PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func) +#define DB8500_PIN(pin,conf,dev) \ + PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) + +#define DB8500_PIN_SLEEP(pin,conf,dev) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ + pin, conf) + +/* Pin control settings */ +static struct pinctrl_map __initdata mop500_family_pinmap[] = { + /* + * uMSP0, mux in 4 pins, regular placement of RX/TX + * explicitly set the pins to no pull + */ + DB8500_MUX_HOG("msp0txrx_a_1", "msp0"), + DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"), + DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */ + DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */ + DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */ + DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */ + /* MSP2 for HDMI, pull down TXD, TCK, TFS */ + DB8500_MUX_HOG("msp2_a_1", "msp2"), + DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */ + DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */ + DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */ + DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */ + /* + * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to + * pull-up + * TODO: is this really correct? Snowball doesn't have a LCD. + */ + DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"), + DB8500_PIN_HOG("GPIO68_E1", in_pu), + DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu), + /* + * STMPE1601/tc35893 keypad IRQ GPIO 218 + * TODO: set for snowball and HREF really?? + */ + DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu), + /* + * UART0, we do not mux in u0 here. + * uart-0 pins gpio configuration should be kept intact to prevent + * a glitch in tx line when the tty dev is opened. Later these pins * are configured to uart mop500_pins_uart0 - * - * It will be replaced with uart configuration - * once the issue is solved. */ - GPIO0_GPIO | PIN_INPUT_PULLUP, - GPIO1_GPIO | PIN_OUTPUT_HIGH, - GPIO2_GPIO | PIN_INPUT_PULLUP, - GPIO3_GPIO | PIN_OUTPUT_HIGH, - - GPIO29_U2_RXD | PIN_INPUT_PULLUP, - GPIO30_U2_TXD | PIN_OUTPUT_HIGH, - GPIO31_U2_CTSn | PIN_INPUT_PULLUP, - GPIO32_U2_RTSn | PIN_OUTPUT_HIGH, - - /* Display & HDMI HW sync */ - GPIO68_LCD_VSI0 | PIN_INPUT_PULLUP, - GPIO69_LCD_VSI1 | PIN_INPUT_PULLUP, + DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */ + DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */ + DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */ + DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */ + /* + * Mux in UART2 on altfunction C and set pull-ups. + * TODO: is this used on U8500 variants and Snowball really? + * The setting on GPIO31 conflicts with magnetometer use on hrefv60 + */ + DB8500_MUX_HOG("u2rxtx_c_1", "u2"), + DB8500_MUX_HOG("u2ctsrts_c_1", "u2"), + DB8500_PIN_HOG("GPIO29_W2", in_pu), /* RXD */ + DB8500_PIN_HOG("GPIO30_W3", out_hi), /* TXD */ + DB8500_PIN_HOG("GPIO31_V3", in_pu), /* CTS */ + DB8500_PIN_HOG("GPIO32_V2", out_hi), /* RTS */ + /* + * The following pin sets were known as "runtime pins" before being + * converted to the pinctrl model. Here we model them as "default" + * states. + */ + /* Mux in UART0 after initialization */ + DB8500_MUX("u0_a_1", "u0", "uart0"), + DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */ + DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ + DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ + DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ + /* UART0 sleep state */ + DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"), + /* MSP1 for ALSA codec */ + DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"), + DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"), + DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + /* MSP1 sleep state */ + DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), + /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ + DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), + DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), + /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */ + DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"), + /* Mux in I2C blocks, put pins into GPIO in sleepmode no pull-up */ + DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"), + DB8500_PIN("GPIO147_C15", slpm_gpio_nopull, "nmk-i2c.0"), + DB8500_PIN("GPIO148_B16", slpm_gpio_nopull, "nmk-i2c.0"), + DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"), + DB8500_PIN("GPIO16_AD3", slpm_gpio_nopull, "nmk-i2c.1"), + DB8500_PIN("GPIO17_AD4", slpm_gpio_nopull, "nmk-i2c.1"), + DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"), + DB8500_PIN("GPIO10_AF5", slpm_gpio_nopull, "nmk-i2c.2"), + DB8500_PIN("GPIO11_AG4", slpm_gpio_nopull, "nmk-i2c.2"), + DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"), + DB8500_PIN("GPIO229_AG7", slpm_gpio_nopull, "nmk-i2c.3"), + DB8500_PIN("GPIO230_AF7", slpm_gpio_nopull, "nmk-i2c.3"), + /* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */ + DB8500_MUX("mc0_a_1", "mc0", "sdi0"), + DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */ + DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */ + DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */ + DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */ + DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */ + DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */ + DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */ + DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */ + DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */ + DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */ + /* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */ + DB8500_MUX("mc1_a_1", "mc1", "sdi1"), + DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */ + DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */ + DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */ + DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */ + DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */ + DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */ + DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */ + /* Mux in SDI2 (here called MC2) used for for PoP eMMC */ + DB8500_MUX("mc2_a_1", "mc2", "sdi2"), + DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */ + DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */ + DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */ + DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */ + DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */ + DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */ + DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */ + DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */ + DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */ + DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */ + DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */ + /* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */ + DB8500_MUX("mc4_a_1", "mc4", "sdi4"), + DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */ + DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */ + DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */ + DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */ + DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */ + DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */ + DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */ + DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */ + DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */ + DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */ + DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */ + /* Mux in USB pins, drive STP high */ + DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"), + DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */ + /* Mux in SPI2 pins on the "other C1" altfunction */ + DB8500_MUX("spi2_oc1_1", "spi2", "spi2"), + DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */ + DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */ + DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ + DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ }; -static pin_cfg_t mop500_pins_default[] = { - /* SSP0 */ - GPIO143_SSP0_CLK, - GPIO144_SSP0_FRM, - GPIO145_SSP0_RXD | PIN_PULL_DOWN, - GPIO146_SSP0_TXD, - - - GPIO217_GPIO | PIN_INPUT_PULLUP, /* TC35892 IRQ */ - - /* SDI0 (MicroSD card) */ - GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, - - /* UART */ - GPIO4_U1_RXD | PIN_INPUT_PULLUP, - GPIO5_U1_TXD | PIN_OUTPUT_HIGH, - GPIO6_U1_CTSn | PIN_INPUT_PULLUP, - GPIO7_U1_RTSn | PIN_OUTPUT_HIGH, +/* + * These are specifically for the MOP500 and HREFP (pre-v60) version of the + * board, which utilized a TC35892 GPIO expander instead of using a lot of + * on-chip pins as the HREFv60 and later does. + */ +static struct pinctrl_map __initdata mop500_pinmap[] = { + /* Mux in SSP0, pull down RXD pin */ + DB8500_MUX_HOG("ssp0_a_1", "ssp0"), + DB8500_PIN_HOG("GPIO145_C13", pd), + /* + * XENON Flashgun on image processor GPIO (controlled from image + * processor firmware), mux in these image processor GPIO lines 0 + * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up + * the pins. + */ + DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), + DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), + DB8500_PIN_HOG("GPIO6_AF6", in_pu), + DB8500_PIN_HOG("GPIO7_AG5", in_pu), + /* TC35892 IRQ, pull up the line, let the driver mux in the pin */ + DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu), + /* Mux in UART1 and set the pull-ups */ + DB8500_MUX_HOG("u1rxtx_a_1", "u1"), + DB8500_MUX_HOG("u1ctsrts_a_1", "u1"), + DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */ + DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */ + DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* CTS */ + DB8500_PIN_HOG("GPIO7_AG5", out_hi), /* RTS */ + /* + * Runtime stuff: make it possible to mux in the SKE keypad + * and bias the pins + */ + DB8500_MUX("kp_a_2", "kp", "ske"), + DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ + DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ + DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ + DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ + DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ + DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ + DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ + DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ + DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ + DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ + DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ + DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ + DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ + DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ + DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ + DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ + /* Mux in and drive the SDI0 DAT31DIR line high at runtime */ + DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"), + DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"), }; -static pin_cfg_t hrefv60_pins[] = { - /* WLAN */ - GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */ - GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */ - - /* XENON Flashgun INTERFACE */ - GPIO6_IP_GPIO0 | PIN_INPUT_PULLUP,/* XENON_FLASH_ID */ - GPIO7_IP_GPIO1 | PIN_INPUT_PULLUP,/* XENON_READY */ - GPIO170_GPIO | PIN_OUTPUT_LOW, /* XENON_CHARGE */ - - /* Assistant LED INTERFACE */ - GPIO21_GPIO | PIN_OUTPUT_LOW, /* XENON_EN1 */ - GPIO64_IP_GPIO4 | PIN_OUTPUT_LOW, /* XENON_EN2 */ - - /* Magnetometer */ - GPIO31_GPIO | PIN_INPUT_PULLUP, /* magnetometer_INT */ - GPIO32_GPIO | PIN_INPUT_PULLDOWN, /* Magnetometer DRDY */ - - /* Display Interface */ - GPIO65_GPIO | PIN_OUTPUT_LOW, /* DISP1 RST */ - GPIO66_GPIO | PIN_OUTPUT_LOW, /* DISP2 RST */ - - /* Touch screen INTERFACE */ - GPIO143_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST1 */ - - /* Touch screen INTERFACE 2 */ - GPIO67_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT2 */ - GPIO146_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST2 */ - - /* ETM_PTM_TRACE INTERFACE */ - GPIO70_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA23 */ - GPIO71_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA22 */ - GPIO72_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA21 */ - GPIO73_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA20 */ - GPIO74_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA19 */ - - /* NAHJ INTERFACE */ - GPIO76_GPIO | PIN_OUTPUT_LOW,/* NAHJ_CTRL */ - GPIO216_GPIO | PIN_OUTPUT_HIGH,/* NAHJ_CTRL_INV */ - - /* NFC INTERFACE */ - GPIO77_GPIO | PIN_OUTPUT_LOW, /* NFC_ENA */ - GPIO144_GPIO | PIN_INPUT_PULLDOWN, /* NFC_IRQ */ - GPIO142_GPIO | PIN_OUTPUT_LOW, /* NFC_RESET */ - - /* Keyboard MATRIX INTERFACE */ - GPIO90_MC5_CMD | PIN_OUTPUT_LOW, /* KP_O_1 */ - GPIO87_MC5_DAT1 | PIN_OUTPUT_LOW, /* KP_O_2 */ - GPIO86_MC5_DAT0 | PIN_OUTPUT_LOW, /* KP_O_3 */ - GPIO96_KP_O6 | PIN_OUTPUT_LOW, /* KP_O_6 */ - GPIO94_KP_O7 | PIN_OUTPUT_LOW, /* KP_O_7 */ - GPIO93_MC5_DAT4 | PIN_INPUT_PULLUP, /* KP_I_0 */ - GPIO89_MC5_DAT3 | PIN_INPUT_PULLUP, /* KP_I_2 */ - GPIO88_MC5_DAT2 | PIN_INPUT_PULLUP, /* KP_I_3 */ - GPIO91_GPIO | PIN_INPUT_PULLUP, /* FORCE_SENSING_INT */ - GPIO92_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_RST */ - GPIO97_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_WU */ - - /* DiPro Sensor Interface */ - GPIO139_GPIO | PIN_INPUT_PULLUP, /* DIPRO_INT */ - - /* HAL SWITCH INTERFACE */ - GPIO145_GPIO | PIN_INPUT_PULLDOWN,/* HAL_SW */ - - /* Audio Amplifier Interface */ - GPIO149_GPIO | PIN_OUTPUT_LOW, /* VAUDIO_HF_EN */ - - /* GBF INTERFACE */ - GPIO171_GPIO | PIN_OUTPUT_LOW, /* GBF_ENA_RESET */ - - /* MSP : HDTV INTERFACE */ - GPIO192_GPIO | PIN_INPUT_PULLDOWN, - - /* ACCELEROMETER_INTERFACE */ - GPIO82_GPIO | PIN_INPUT_PULLUP, /* ACC_INT1 */ - GPIO83_GPIO | PIN_INPUT_PULLUP, /* ACC_INT2 */ - - /* Proximity Sensor */ - GPIO217_GPIO | PIN_INPUT_PULLUP, - - +/* + * The HREFv60 series of platforms is using available pins on the DB8500 + * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0 + * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines. + */ +static struct pinctrl_map __initdata hrefv60_pinmap[] = { + /* Drive WLAN_ENA low */ + DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */ + /* + * XENON Flashgun on image processor GPIO (controlled from image + * processor firmware), mux in these image processor GPIO lines 0 + * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant + * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias + * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output. + */ + DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), + DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), + DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"), + DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */ + DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */ + DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */ + DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */ + /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ + DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */ + DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */ + /* + * Display Interface 1 uses GPIO 65 for RST (reset). + * Display Interface 2 uses GPIO 66 for RST (reset). + * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) + */ + DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */ + DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */ + /* + * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and + * GPIO 67 for interrupts. Pull-up the IRQ line and drive both + * reset signals low. + */ + DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */ + DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */ + DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */ + /* + * Drive D19-D23 for the ETM PTM trace interface low, + * (presumably pins are unconnected therefore grounded here, + * the "other alt C1" setting enables these pins) + */ + DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo), + DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo), + DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo), + DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo), + DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo), + /* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */ + DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */ + DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */ + /* NFC ENA and RESET to low, pulldown IRQ line */ + DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */ + DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */ + DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */ + /* + * SKE keyboard partly on alt A and partly on "Other alt C1" + * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three + * rows of 6 keys, then pull up force sensing interrup and + * drive reset and force sensing WU low. + */ + DB8500_MUX_HOG("kp_a_1", "kp"), + DB8500_MUX_HOG("kp_oc1_1", "kp"), + DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */ + DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */ + DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */ + DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */ + DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */ + DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */ + DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */ + DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */ + DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */ + DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */ + DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */ + /* DiPro Sensor interrupt */ + DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */ + /* Audio Amplifier HF enable */ + DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */ + /* GBF interface, pull low to reset state */ + DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */ + /* MSP : HDTV INTERFACE GPIO line */ + DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd), + /* Accelerometer interrupt lines */ + DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */ + DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */ + /* SD card detect GPIO pin */ + DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu), + /* + * Runtime stuff + * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor + * etc. + */ + DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), + DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"), + DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), + /* + * Make it possible to mux in the SKE keypad and bias the pins + * FIXME: what's the point with this on HREFv60? KP/SKE is already + * muxed in at another place! Enabling this will bork. + */ + DB8500_MUX("kp_a_2", "kp", "ske"), + DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ + DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ + DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ + DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ + DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ + DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ + DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ + DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ + DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ + DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ + DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ + DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ + DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ + DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ + DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ + DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ }; -static pin_cfg_t snowball_pins[] = { - /* SSP0, to AB8500 */ - GPIO143_SSP0_CLK, - GPIO144_SSP0_FRM, - GPIO145_SSP0_RXD | PIN_PULL_DOWN, - GPIO146_SSP0_TXD, +static struct pinctrl_map __initdata u9500_pinmap[] = { + /* Mux in UART1 (just RX/TX) and set the pull-ups */ + DB8500_MUX_HOG("u1rxtx_a_1", "u1"), + DB8500_PIN_HOG("GPIO4_AH6", in_pu), + DB8500_PIN_HOG("GPIO5_AG6", out_hi), + /* WLAN_IRQ line */ + DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu), + /* HSI */ + DB8500_MUX_HOG("hsir_a_1", "hsi"), + DB8500_MUX_HOG("hsit_a_1", "hsi"), + DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */ + DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */ + DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */ + DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */ + DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */ + DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */ + DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */ + DB8500_PIN_HOG("GPIO226_AF8", out_hi), /* ACWAKE0 */ +}; - /* MMC0: MicroSD card */ - GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, +static struct pinctrl_map __initdata u8500_pinmap[] = { + DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */ + DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */ +}; - /* MMC2: LAN */ - GPIO86_SM_ADQ0, - GPIO87_SM_ADQ1, - GPIO88_SM_ADQ2, - GPIO89_SM_ADQ3, - GPIO90_SM_ADQ4, - GPIO91_SM_ADQ5, - GPIO92_SM_ADQ6, - GPIO93_SM_ADQ7, +static struct pinctrl_map __initdata snowball_pinmap[] = { + /* Mux in SSP0 connected to AB8500, pull down RXD pin */ + DB8500_MUX_HOG("ssp0_a_1", "ssp0"), + DB8500_PIN_HOG("GPIO145_C13", pd), + /* Always drive the MC0 DAT31DIR line high on these boards */ + DB8500_PIN_HOG("GPIO21_AB3", out_hi), + /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */ + DB8500_MUX_HOG("sm_b_1", "sm"), + /* Drive RSTn_LAN high */ + DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi), + /* Accelerometer/Magnetometer */ + DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */ + DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */ + DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */ + /* WLAN/GBF */ + DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */ + DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */ + DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */ + DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */ +}; - GPIO94_SM_ADVn, - GPIO95_SM_CS0n, - GPIO96_SM_OEn, - GPIO97_SM_WEn, +/* + * passing "pinsfor=" in kernel cmdline allows for custom + * configuration of GPIOs on u8500 derived boards. + */ +static int __init early_pinsfor(char *p) +{ + pinsfor = PINS_FOR_DEFAULT; - GPIO128_SM_CKO, - GPIO130_SM_FBCLK, - GPIO131_SM_ADQ8, - GPIO132_SM_ADQ9, - GPIO133_SM_ADQ10, - GPIO134_SM_ADQ11, - GPIO135_SM_ADQ12, - GPIO136_SM_ADQ13, - GPIO137_SM_ADQ14, - GPIO138_SM_ADQ15, + if (strcmp(p, "u9500-21") == 0) + pinsfor = PINS_FOR_U9500; - /* RSTn_LAN */ - GPIO141_GPIO | PIN_OUTPUT_HIGH, -}; + return 0; +} +early_param("pinsfor", early_pinsfor); -void __init mop500_pins_init(void) +int pins_for_u9500(void) { - nmk_config_pins(mop500_pins_common, - ARRAY_SIZE(mop500_pins_common)); + if (pinsfor == PINS_FOR_U9500) + return 1; - nmk_config_pins(mop500_pins_default, - ARRAY_SIZE(mop500_pins_default)); + return 0; } -void __init snowball_pins_init(void) +static void __init mop500_href_family_pinmaps_init(void) { - nmk_config_pins(mop500_pins_common, - ARRAY_SIZE(mop500_pins_common)); + switch (pinsfor) { + case PINS_FOR_U9500: + pinctrl_register_mappings(u9500_pinmap, + ARRAY_SIZE(u9500_pinmap)); + break; + case PINS_FOR_DEFAULT: + pinctrl_register_mappings(u8500_pinmap, + ARRAY_SIZE(u8500_pinmap)); + default: + break; + } +} - nmk_config_pins(snowball_pins, - ARRAY_SIZE(snowball_pins)); +void __init mop500_pinmaps_init(void) +{ + pinctrl_register_mappings(mop500_family_pinmap, + ARRAY_SIZE(mop500_family_pinmap)); + pinctrl_register_mappings(mop500_pinmap, + ARRAY_SIZE(mop500_pinmap)); + mop500_href_family_pinmaps_init(); } -void __init hrefv60_pins_init(void) +void __init snowball_pinmaps_init(void) { - nmk_config_pins(mop500_pins_common, - ARRAY_SIZE(mop500_pins_common)); + pinctrl_register_mappings(mop500_family_pinmap, + ARRAY_SIZE(mop500_family_pinmap)); + pinctrl_register_mappings(snowball_pinmap, + ARRAY_SIZE(snowball_pinmap)); + pinctrl_register_mappings(u8500_pinmap, + ARRAY_SIZE(u8500_pinmap)); +} - nmk_config_pins(hrefv60_pins, - ARRAY_SIZE(hrefv60_pins)); +void __init hrefv60_pinmaps_init(void) +{ + pinctrl_register_mappings(mop500_family_pinmap, + ARRAY_SIZE(mop500_family_pinmap)); + pinctrl_register_mappings(hrefv60_pinmap, + ARRAY_SIZE(hrefv60_pinmap)); + mop500_href_family_pinmaps_init(); } diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 920251cf834c..18ff781cfbe4 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -80,7 +80,7 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi0_data = { +struct mmci_platform_data mop500_sdi0_data = { .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, @@ -227,7 +227,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi4_data = { +struct mmci_platform_data mop500_sdi4_data = { .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 5af36aa56c08..1f47d962e3a1 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -96,13 +96,13 @@ static void __init __mop500_uib_init(struct uib *uib, const char *why) /* * Detect the UIB attached based on the presence or absence of i2c devices. */ -static int __init mop500_uib_init(void) +int __init mop500_uib_init(void) { struct uib *uib = mop500_uib; struct i2c_adapter *i2c0; int ret; - if (!cpu_is_u8500()) + if (!cpu_is_u8500_family()) return -ENODEV; if (uib) { @@ -131,5 +131,3 @@ static int __init mop500_uib_init(void) return 0; } - -module_init(mop500_uib_init); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 77d03c1fbd04..8674a890fd1c 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -1,3 +1,4 @@ + /* * Copyright (C) 2008-2009 ST-Ericsson * @@ -14,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> +#include <linux/platform_data/i2c-nomadik.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> @@ -24,40 +26,40 @@ #include <linux/mfd/tc3589x.h> #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> +#include <linux/mfd/abx500/ab8500-codec.h> #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/smsc911x.h> #include <linux/gpio_keys.h> #include <linux/delay.h> - #include <linux/of.h> #include <linux/of_platform.h> - #include <linux/leds.h> +#include <linux/pinctrl/consumer.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> -#include <plat/i2c.h> #include <plat/ste_dma40.h> -#include <plat/pincfg.h> #include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include <mach/irqs.h> +#include <mach/crypto-ux500.h> -#include "pins-db8500.h" #include "ste-dma40-db8500.h" #include "devices-db8500.h" #include "board-mop500.h" #include "board-mop500-regulators.h" +#include "board-mop500-msp.h" static struct gpio_led snowball_led_array[] = { { .name = "user_led", - .default_trigger = "none", + .default_trigger = "heartbeat", .gpio = 142, }, }; @@ -96,6 +98,18 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { 0x7A, 0x00, 0x00}, }; +/* ab8500-codec */ +static struct ab8500_codec_platform_data ab8500_codec_pdata = { + .amics = { + .mic1_type = AMIC_TYPE_DIFFERENTIAL, + .mic2_type = AMIC_TYPE_DIFFERENTIAL, + .mic1a_micbias = AMIC_MICBIAS_VAMIC1, + .mic1b_micbias = AMIC_MICBIAS_VAMIC1, + .mic2_micbias = AMIC_MICBIAS_VAMIC2 + }, + .ear_cmv = EAR_CMV_0_95V +}; + static struct gpio_keys_button snowball_key_array[] = { { .gpio = 32, @@ -194,24 +208,7 @@ static struct ab8500_platform_data ab8500_platdata = { .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), .gpio = &ab8500_gpio_pdata, -}; - -static struct resource ab8500_resources[] = { - [0] = { - .start = IRQ_DB8500_AB8500, - .end = IRQ_DB8500_AB8500, - .flags = IORESOURCE_IRQ - } -}; - -struct platform_device ab8500_device = { - .name = "ab8500-i2c", - .id = 0, - .dev = { - .platform_data = &ab8500_platdata, - }, - .num_resources = 1, - .resource = ab8500_resources, + .codec = &ab8500_codec_pdata, }; /* @@ -330,43 +327,12 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = { }, }; -#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \ -static struct nmk_i2c_controller u8500_i2c##id##_data = { \ - /* \ - * slave data setup time, which is \ - * 250 ns,100ns,10ns which is 14,6,2 \ - * respectively for a 48 Mhz \ - * i2c clock \ - */ \ - .slsu = _slsu, \ - /* Tx FIFO threshold */ \ - .tft = _tft, \ - /* Rx FIFO threshold */ \ - .rft = _rft, \ - /* std. mode operation */ \ - .clk_freq = clk, \ - /* Slave response timeout(ms) */\ - .timeout = t_out, \ - .sm = _sm, \ -} - -/* - * The board uses 4 i2c controllers, initialize all of - * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 8 and standard - * mode of operation - */ -U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); - static void __init mop500_i2c_init(struct device *parent) { - db8500_add_i2c0(parent, &u8500_i2c0_data); - db8500_add_i2c1(parent, &u8500_i2c1_data); - db8500_add_i2c2(parent, &u8500_i2c2_data); - db8500_add_i2c3(parent, &u8500_i2c3_data); + db8500_add_i2c0(parent, NULL); + db8500_add_i2c1(parent, NULL); + db8500_add_i2c2(parent, NULL); + db8500_add_i2c3(parent, NULL); } static struct gpio_keys_button mop500_gpio_keys[] = { @@ -417,10 +383,48 @@ static void mop500_prox_deactivate(struct device *dev) regulator_put(prox_regulator); } +static struct cryp_platform_data u8500_cryp1_platform_data = { + .mem_to_engine = { + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV48_CAC1_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, + .mode = STEDMA40_MODE_LOGICAL, + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + }, + .engine_to_mem = { + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV48_CAC1_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, + .mode = STEDMA40_MODE_LOGICAL, + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + } +}; + +static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = { + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV50_HAC1_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, + .mode = STEDMA40_MODE_LOGICAL, + .src_info.psize = STEDMA40_PSIZE_LOG_16, + .dst_info.psize = STEDMA40_PSIZE_LOG_16, +}; + +static struct hash_platform_data u8500_hash1_platform_data = { + .mem_to_engine = &u8500_hash_dma_cfg_tx, + .dma_filter = stedma40_filter, +}; + /* add any platform devices here - TODO */ static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, - &ab8500_device, }; #ifdef CONFIG_STE_DMA40 @@ -520,14 +524,6 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif - -static pin_cfg_t mop500_pins_uart0[] = { - GPIO0_U0_CTSn | PIN_INPUT_PULLUP, - GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, - GPIO2_U0_RXD | PIN_INPUT_PULLUP, - GPIO3_U0_TXD | PIN_OUTPUT_HIGH, -}; - #define PRCC_K_SOFTRST_SET 0x18 #define PRCC_K_SOFTRST_CLEAR 0x1C static void ux500_uart0_reset(void) @@ -548,34 +544,12 @@ static void ux500_uart0_reset(void) udelay(1); } -static void ux500_uart0_init(void) -{ - int ret; - - ret = nmk_config_pins(mop500_pins_uart0, - ARRAY_SIZE(mop500_pins_uart0)); - if (ret < 0) - pr_err("pl011: uart pins_enable failed\n"); -} - -static void ux500_uart0_exit(void) -{ - int ret; - - ret = nmk_config_pins_sleep(mop500_pins_uart0, - ARRAY_SIZE(mop500_pins_uart0)); - if (ret < 0) - pr_err("pl011: uart pins_disable failed\n"); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .init = ux500_uart0_init, - .exit = ux500_uart0_exit, .reset = ux500_uart0_reset, }; @@ -602,11 +576,16 @@ static void __init mop500_uart_init(struct device *parent) db8500_add_uart2(parent, &uart2_plat); } +static void __init u8500_cryp1_hash1_init(struct device *parent) +{ + db8500_add_cryp1(parent, &u8500_cryp1_platform_data); + db8500_add_hash1(parent, &u8500_hash1_platform_data); +} + static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_led_dev, &snowball_key_dev, &snowball_sbnet_dev, - &ab8500_device, }; static void __init mop500_init_machine(void) @@ -617,11 +596,9 @@ static void __init mop500_init_machine(void) mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - parent = u8500_init_devices(); - - mop500_pins_init(); + mop500_pinmaps_init(); + parent = u8500_init_devices(&ab8500_platdata); - /* FIXME: parent of ab8500 should be prcmu */ for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -631,8 +608,11 @@ static void __init mop500_init_machine(void) mop500_i2c_init(parent); mop500_sdi_init(parent); mop500_spi_init(parent); + mop500_msp_init(parent); mop500_uart_init(parent); + u8500_cryp1_hash1_init(parent); + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); @@ -641,17 +621,17 @@ static void __init mop500_init_machine(void) /* This board has full regulator constraints */ regulator_has_full_constraints(); + + mop500_uib_init(); } static void __init snowball_init_machine(void) { struct device *parent = NULL; - int i2c0_devs; int i; - parent = u8500_init_devices(); - - snowball_pins_init(); + snowball_pinmaps_init(); + parent = u8500_init_devices(&ab8500_platdata); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -662,13 +642,9 @@ static void __init snowball_init_machine(void) mop500_i2c_init(parent); snowball_sdi_init(parent); mop500_spi_init(parent); + mop500_msp_init(parent); mop500_uart_init(parent); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - /* This board has full regulator constraints */ regulator_has_full_constraints(); } @@ -686,9 +662,8 @@ static void __init hrefv60_init_machine(void) */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - parent = u8500_init_devices(); - - hrefv60_pins_init(); + hrefv60_pinmaps_init(); + parent = u8500_init_devices(&ab8500_platdata); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -699,6 +674,7 @@ static void __init hrefv60_init_machine(void) mop500_i2c_init(parent); hrefv60_sdi_init(parent); mop500_spi_init(parent); + mop500_msp_init(parent); mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -711,6 +687,8 @@ static void __init hrefv60_init_machine(void) /* This board has full regulator constraints */ regulator_has_full_constraints(); + + mop500_uib_init(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") @@ -722,6 +700,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .timer = &ux500_timer, .handle_irq = gic_handle_irq, .init_machine = mop500_init_machine, + .init_late = ux500_init_late, MACHINE_END MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") @@ -731,6 +710,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .timer = &ux500_timer, .handle_irq = gic_handle_irq, .init_machine = hrefv60_init_machine, + .init_late = ux500_init_late, MACHINE_END MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") @@ -741,21 +721,50 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .timer = &ux500_timer, .handle_irq = gic_handle_irq, .init_machine = snowball_init_machine, + .init_late = ux500_init_late, MACHINE_END #ifdef CONFIG_MACH_UX500_DT +static struct platform_device *snowball_of_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, +}; + struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + /* Requires DMA and call-back bindings. */ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), + /* Requires DMA bindings. */ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), + /* Requires clock name bindings. */ + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), + /* Requires device name bindings. */ + OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), {}, }; -static const struct of_device_id u8500_soc_node[] = { +static const struct of_device_id u8500_local_bus_nodes[] = { /* only create devices below soc node */ { .compatible = "stericsson,db8500", }, + { .compatible = "stericsson,db8500-prcmu", }, + { .compatible = "simple-bus"}, { }, }; @@ -765,31 +774,36 @@ static void __init u8500_init_machine(void) int i2c0_devs; int i; - parent = u8500_init_devices(); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + /* Pinmaps must be in place before devices register */ + if (of_machine_is_compatible("st-ericsson,mop500")) + mop500_pinmaps_init(); + else if (of_machine_is_compatible("calaosystems,snowball-a9500")) + snowball_pinmaps_init(); + else if (of_machine_is_compatible("st-ericsson,hrefv60+")) + hrefv60_pinmaps_init(); + + parent = u8500_of_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; - for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) - snowball_platform_devs[i]->dev.parent = parent; /* automatically probe child nodes of db8500 device */ - of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent); + of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); if (of_machine_is_compatible("st-ericsson,mop500")) { mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - mop500_pins_init(); platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); - } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - snowball_pins_init(); - platform_add_devices(snowball_platform_devs, - ARRAY_SIZE(snowball_platform_devs)); + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + mop500_uib_init(); - snowball_sdi_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -797,18 +811,20 @@ static void __init u8500_init_machine(void) * instead. */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; - hrefv60_pins_init(); platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); - } - mop500_i2c_init(parent); - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + mop500_uib_init(); + } /* This board has full regulator constraints */ regulator_has_full_constraints(); @@ -830,6 +846,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)") .timer = &ux500_timer, .handle_irq = gic_handle_irq, .init_machine = u8500_init_machine, + .init_late = ux500_init_late, .dt_compat = u8500_dt_board_compat, MACHINE_END #endif diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index fdcfa8721bb4..b5bfc1a78b1a 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,6 +7,10 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H +/* For NOMADIK_NR_GPIO */ +#include <mach/irqs.h> +#include <linux/amba/mmci.h> + /* Snowball specific GPIO assignments, this board has no GPIO expander */ #define SNOWBALL_ACCEL_INT1_GPIO 163 #define SNOWBALL_ACCEL_INT2_GPIO 164 @@ -73,7 +77,10 @@ #define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */ #define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */ +struct device; struct i2c_board_info; +extern struct mmci_platform_data mop500_sdi0_data; +extern struct mmci_platform_data mop500_sdi4_data; extern void mop500_sdi_init(struct device *parent); extern void snowball_sdi_init(struct device *parent); @@ -81,11 +88,15 @@ extern void hrefv60_sdi_init(struct device *parent); extern void mop500_sdi_tc35892_init(struct device *parent); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); -void __init mop500_pins_init(void); -void __init hrefv60_pins_init(void); -void __init snowball_pins_init(void); +void __init mop500_pinmaps_init(void); +void __init snowball_pinmaps_init(void); +void __init hrefv60_pinmaps_init(void); +int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, unsigned n); +/* TODO: Once all pieces are DT:ed, remove completely. */ +struct device * __init u8500_of_init_devices(void); + #endif diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c deleted file mode 100644 index 836112eedde7..000000000000 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Hanumath Prasad <ulf.hansson@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/amba/mmci.h> -#include <linux/mmc/host.h> - -#include <plat/pincfg.h> -#include <plat/gpio-nomadik.h> -#include <mach/db5500-regs.h> -#include <plat/ste_dma40.h> - -#include "pins-db5500.h" -#include "devices-db5500.h" -#include "ste-dma40-db5500.h" - -static pin_cfg_t u5500_sdi_pins[] = { - /* SDI0 (POP eMMC) */ - GPIO5_MC0_DAT0 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO6_MC0_DAT1 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO7_MC0_DAT2 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO8_MC0_DAT3 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO9_MC0_DAT4 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO10_MC0_DAT5 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO11_MC0_DAT6 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO12_MC0_DAT7 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO13_MC0_CMD | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW, -}; - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; - -static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; -#endif - -static struct mmci_platform_data u5500_sdi0_data = { - .ocr_mask = MMC_VDD_165_195, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &u5500_sdi0_dma_cfg_rx, - .dma_tx_param = &u5500_sdi0_dma_cfg_tx, -#endif -}; - -void __init u5500_sdi_init(struct device *parent) -{ - nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins)); - - db5500_add_sdi0(parent, &u5500_sdi0_data); -} diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c deleted file mode 100644 index 0ff4be72a809..000000000000 --- a/arch/arm/mach-ux500/board-u5500.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/irq.h> -#include <linux/i2c.h> -#include <linux/mfd/abx500/ab5500.h> - -#include <asm/hardware/gic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <plat/pincfg.h> -#include <plat/i2c.h> -#include <plat/gpio-nomadik.h> - -#include <mach/hardware.h> -#include <mach/devices.h> -#include <mach/setup.h> - -#include "pins-db5500.h" -#include "devices-db5500.h" -#include <linux/led-lm3530.h> - -/* - * GPIO - */ - -static pin_cfg_t u5500_pins[] = { - /* I2C */ - GPIO218_I2C2_SCL | PIN_INPUT_PULLUP, - GPIO219_I2C2_SDA | PIN_INPUT_PULLUP, - - /* DISPLAY_ENABLE */ - GPIO226_GPIO | PIN_OUTPUT_LOW, - - /* Backlight Enbale */ - GPIO224_GPIO | PIN_OUTPUT_HIGH, -}; -/* - * I2C - */ - -#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ -static struct nmk_i2c_controller u5500_i2c##id##_data = { \ - /* \ - * slave data setup time, which is \ - * 250 ns,100ns,10ns which is 14,6,2 \ - * respectively for a 48 Mhz \ - * i2c clock \ - */ \ - .slsu = _slsu, \ - /* Tx FIFO threshold */ \ - .tft = _tft, \ - /* Rx FIFO threshold */ \ - .rft = _rft, \ - /* std. mode operation */ \ - .clk_freq = clk, \ - .sm = _sm, \ -} -/* - * The board uses TODO <3> i2c controllers, initialize all of - * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 1 and standard - * mode of operation - */ - -U5500_I2C_CONTROLLER(2, 0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST); - -static struct lm3530_platform_data u5500_als_platform_data = { - .mode = LM3530_BL_MODE_MANUAL, - .als_input_mode = LM3530_INPUT_ALS1, - .max_current = LM3530_FS_CURR_26mA, - .pwm_pol_hi = true, - .als_avrg_time = LM3530_ALS_AVRG_TIME_512ms, - .brt_ramp_law = 1, /* Linear */ - .brt_ramp_fall = LM3530_RAMP_TIME_8s, - .brt_ramp_rise = LM3530_RAMP_TIME_8s, - .als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm, - .als2_resistor_sel = LM3530_ALS_IMPD_Z, - .als_vmin = 730, /* mV */ - .als_vmax = 1020, /* mV */ - .brt_val = 0x7F, /* Max brightness */ -}; - -static struct i2c_board_info __initdata u5500_i2c2_devices[] = { - { - /* Backlight */ - I2C_BOARD_INFO("lm3530-led", 0x36), - .platform_data = &u5500_als_platform_data, - }, -}; - -static void __init u5500_i2c_init(struct device *parent) -{ - db5500_add_i2c2(parent, &u5500_i2c2_data); - i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices)); -} - -static struct ab5500_platform_data ab5500_plf_data = { - .irq = { - .base = 0, - .count = 0, - }, - .init_settings = NULL, - .init_settings_sz = 0, - .pm_power_off = false, -}; - -static struct platform_device ab5500_device = { - .name = "ab5500-core", - .id = 0, - .dev = { - .platform_data = &ab5500_plf_data, - }, - .num_resources = 0, -}; - -static struct platform_device *u5500_platform_devices[] __initdata = { - &ab5500_device, -}; - -static void __init u5500_uart_init(struct device *parent) -{ - db5500_add_uart0(parent, NULL); - db5500_add_uart1(parent, NULL); - db5500_add_uart2(parent, NULL); -} - -static void __init u5500_init_machine(void) -{ - struct device *parent = NULL; - int i; - - parent = u5500_init_devices(); - nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins)); - - u5500_i2c_init(parent); - u5500_sdi_init(parent); - u5500_uart_init(parent); - - for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++) - u5500_platform_devices[i]->dev.parent = parent; - - platform_add_devices(u5500_platform_devices, - ARRAY_SIZE(u5500_platform_devices)); -} - -MACHINE_START(U5500, "ST-Ericsson U5500 Platform") - .atag_offset = 0x100, - .map_io = u5500_map_io, - .init_irq = ux500_init_irq, - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, - .init_machine = u5500_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 77a75ed0df67..dc12394295d5 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -36,9 +36,9 @@ static int __init ux500_l2x0_unlock(void) static int __init ux500_l2x0_init(void) { - if (cpu_is_u5500()) - l2x0_base = __io_address(U5500_L2CC_BASE); - else if (cpu_is_u8500()) + u32 aux_val = 0x3e000000; + + if (cpu_is_u8500_family()) l2x0_base = __io_address(U8500_L2CC_BASE); else ux500_unknown_soc(); @@ -46,11 +46,19 @@ static int __init ux500_l2x0_init(void) /* Unlock before init */ ux500_l2x0_unlock(); + /* DB9540's L2 has 128KB way size */ + if (cpu_is_u9540()) + /* 128KB way size */ + aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); + else + /* 64KB way size */ + aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); + /* 64KB way size, 8 way associativity, force WA */ if (of_have_populated_dt()) - l2x0_of_init(0x3e060000, 0xc0000fff); + l2x0_of_init(aux_val, 0xc0000fff); else - l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + l2x0_init(l2x0_base, aux_val, 0xc0000fff); /* * We can't disable l2 as we are in non secure mode, currently diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index ec35f0aa5665..8d73b066a18d 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -149,9 +149,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk) unsigned long mturate; unsigned long retclk; - if (cpu_is_u5500()) - addr = __io_address(U5500_PRCMU_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500_family()) addr = __io_address(U8500_PRCMU_BASE); else ux500_unknown_soc(); @@ -336,6 +334,7 @@ static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ */ /* Peripheral Cluster #1 */ +static DEFINE_PRCC_CLK(1, msp3, 11, 10, &clk_msp1clk); static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); @@ -382,14 +381,15 @@ static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL); /* Peripheral Cluster #6 */ /* MTU ID in data */ -static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 8, -1, NULL, clk_mtu_get_rate, 1); -static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 7, -1, NULL, clk_mtu_get_rate, 0); -static DEFINE_PRCC_CLK(6, cfgreg, 6, 6, NULL); -static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); -static DEFINE_PRCC_CLK(6, unipro, 4, 1, &clk_uniproclk); -static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL); -static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL); -static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL); +static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1); +static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0); +static DEFINE_PRCC_CLK(6, cfgreg, 7, 7, NULL); +static DEFINE_PRCC_CLK(6, hash1, 6, -1, NULL); +static DEFINE_PRCC_CLK(6, unipro, 5, 1, &clk_uniproclk); +static DEFINE_PRCC_CLK(6, pka, 4, -1, NULL); +static DEFINE_PRCC_CLK(6, hash0, 3, -1, NULL); +static DEFINE_PRCC_CLK(6, cryp0, 2, -1, NULL); +static DEFINE_PRCC_CLK(6, cryp1, 1, -1, NULL); static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk); static struct clk clk_dummy_apb_pclk = { @@ -405,7 +405,7 @@ static struct clk_lookup u8500_clks[] = { CLK(slimbus0, "slimbus0", NULL), CLK(i2c2, "nmk-i2c.2", NULL), CLK(sdi0, "sdi0", NULL), - CLK(msp0, "msp0", NULL), + CLK(msp0, "ux500-msp-i2s.0", NULL), CLK(i2c1, "nmk-i2c.1", NULL), CLK(uart1, "uart1", NULL), CLK(uart0, "uart0", NULL), @@ -431,6 +431,7 @@ static struct clk_lookup u8500_clks[] = { CLK(pka, "pka", NULL), CLK(hash0, "hash0", NULL), CLK(cryp0, "cryp0", NULL), + CLK(cryp1, "cryp1", NULL), /* PRCMU level clock gating */ @@ -455,7 +456,8 @@ static struct clk_lookup u8500_clks[] = { /* Peripheral Cluster #1 */ CLK(i2c4, "nmk-i2c.4", NULL), CLK(spi3, "spi3", NULL), - CLK(msp1, "msp1", NULL), + CLK(msp1, "ux500-msp-i2s.1", NULL), + CLK(msp3, "ux500-msp-i2s.3", NULL), /* Peripheral Cluster #2 */ CLK(gpio1, "gpio.6", NULL), @@ -465,7 +467,7 @@ static struct clk_lookup u8500_clks[] = { CLK(spi0, "spi0", NULL), CLK(sdi3, "sdi3", NULL), CLK(sdi1, "sdi1", NULL), - CLK(msp2, "msp2", NULL), + CLK(msp2, "ux500-msp-i2s.2", NULL), CLK(sdi4, "sdi4", NULL), CLK(pwl, "pwl", NULL), CLK(spi1, "spi1", NULL), @@ -633,7 +635,7 @@ static int clk_debugfs_register(struct clk *c) return 0; } -static int __init clk_debugfs_init(void) +int __init clk_debugfs_init(void) { struct clk *c; struct dentry *d; @@ -655,7 +657,6 @@ err_out: return err; } -late_initcall(clk_debugfs_init); #endif /* defined(CONFIG_DEBUG_FS) */ unsigned long clk_smp_twd_rate = 500000000; @@ -694,25 +695,16 @@ static struct notifier_block clk_twd_cpufreq_nb = { .notifier_call = clk_twd_cpufreq_transition, }; -static int clk_init_smp_twd_cpufreq(void) +int clk_init_smp_twd_cpufreq(void) { return cpufreq_register_notifier(&clk_twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); } -late_initcall(clk_init_smp_twd_cpufreq); #endif int __init clk_init(void) { - if (cpu_is_u5500()) { - /* Clock tree for U5500 not implemented yet */ - clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; - clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; - clk_uartclk.rate = 36360000; - clk_sdmmcclk.rate = 99900000; - } - clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks)); clkdev_add(&clk_smp_twd_lookup); diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h index d776ada08dbf..65d27a13f46d 100644 --- a/arch/arm/mach-ux500/clock.h +++ b/arch/arm/mach-ux500/clock.h @@ -150,3 +150,15 @@ struct clk clk_##_name = { \ int __init clk_db8500_ed_fixup(void); int __init clk_init(void); + +#ifdef CONFIG_DEBUG_FS +int clk_debugfs_init(void); +#else +static inline int clk_debugfs_init(void) { return 0; } +#endif + +#ifdef CONFIG_CPU_FREQ +int clk_init_smp_twd_cpufreq(void); +#else +static inline int clk_init_smp_twd_cpufreq(void) { return 0; } +#endif diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c deleted file mode 100644 index bca47f32082f..000000000000 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/io.h> -#include <linux/irq.h> - -#include <asm/mach/map.h> -#include <asm/pmu.h> - -#include <plat/gpio-nomadik.h> - -#include <mach/hardware.h> -#include <mach/devices.h> -#include <mach/setup.h> -#include <mach/irqs.h> -#include <mach/usb.h> - -#include "devices-db5500.h" -#include "ste-dma40-db5500.h" - -static struct map_desc u5500_uart_io_desc[] __initdata = { - __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_UART2_BASE, SZ_4K), -}; - -static struct map_desc u5500_io_desc[] __initdata = { - /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ - __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K), - __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K), - __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K), - - __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), - __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), - __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K), -}; - -static struct resource mbox0_resources[] = { - { - .name = "mbox_peer", - .start = U5500_MBOX0_PEER_START, - .end = U5500_MBOX0_PEER_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_local", - .start = U5500_MBOX0_LOCAL_START, - .end = U5500_MBOX0_LOCAL_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_irq", - .start = MBOX_PAIR0_VIRT_IRQ, - .end = MBOX_PAIR0_VIRT_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource mbox1_resources[] = { - { - .name = "mbox_peer", - .start = U5500_MBOX1_PEER_START, - .end = U5500_MBOX1_PEER_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_local", - .start = U5500_MBOX1_LOCAL_START, - .end = U5500_MBOX1_LOCAL_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_irq", - .start = MBOX_PAIR1_VIRT_IRQ, - .end = MBOX_PAIR1_VIRT_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource mbox2_resources[] = { - { - .name = "mbox_peer", - .start = U5500_MBOX2_PEER_START, - .end = U5500_MBOX2_PEER_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_local", - .start = U5500_MBOX2_LOCAL_START, - .end = U5500_MBOX2_LOCAL_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_irq", - .start = MBOX_PAIR2_VIRT_IRQ, - .end = MBOX_PAIR2_VIRT_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device mbox0_device = { - .id = 0, - .name = "mbox", - .resource = mbox0_resources, - .num_resources = ARRAY_SIZE(mbox0_resources), -}; - -static struct platform_device mbox1_device = { - .id = 1, - .name = "mbox", - .resource = mbox1_resources, - .num_resources = ARRAY_SIZE(mbox1_resources), -}; - -static struct platform_device mbox2_device = { - .id = 2, - .name = "mbox", - .resource = mbox2_resources, - .num_resources = ARRAY_SIZE(mbox2_resources), -}; - -static struct platform_device *db5500_platform_devs[] __initdata = { - &mbox0_device, - &mbox1_device, - &mbox2_device, -}; - -static resource_size_t __initdata db5500_gpio_base[] = { - U5500_GPIOBANK0_BASE, - U5500_GPIOBANK1_BASE, - U5500_GPIOBANK2_BASE, - U5500_GPIOBANK3_BASE, - U5500_GPIOBANK4_BASE, - U5500_GPIOBANK5_BASE, - U5500_GPIOBANK6_BASE, - U5500_GPIOBANK7_BASE, -}; - -static void __init db5500_add_gpios(struct device *parent) -{ - struct nmk_gpio_platform_data pdata = { - /* No custom data yet */ - }; - - dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base), - IRQ_DB5500_GPIO0, &pdata); -} - -void __init u5500_map_io(void) -{ - /* - * Map the UARTs early so that the DEBUG_LL stuff continues to work. - */ - iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc)); - - ux500_map_io(); - - iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); - - _PRCMU_BASE = __io_address(U5500_PRCMU_BASE); -} - -static void __init db5500_pmu_init(void) -{ - struct resource res[] = { - [0] = { - .start = IRQ_DB5500_PMU0, - .end = IRQ_DB5500_PMU0, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = IRQ_DB5500_PMU1, - .end = IRQ_DB5500_PMU1, - .flags = IORESOURCE_IRQ, - }, - }; - - platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU, - res, ARRAY_SIZE(res)); -} - -static int usb_db5500_rx_dma_cfg[] = { - DB5500_DMA_DEV4_USB_OTG_IEP_1_9, - DB5500_DMA_DEV5_USB_OTG_IEP_2_10, - DB5500_DMA_DEV6_USB_OTG_IEP_3_11, - DB5500_DMA_DEV20_USB_OTG_IEP_4_12, - DB5500_DMA_DEV21_USB_OTG_IEP_5_13, - DB5500_DMA_DEV22_USB_OTG_IEP_6_14, - DB5500_DMA_DEV23_USB_OTG_IEP_7_15, - DB5500_DMA_DEV38_USB_OTG_IEP_8 -}; - -static int usb_db5500_tx_dma_cfg[] = { - DB5500_DMA_DEV4_USB_OTG_OEP_1_9, - DB5500_DMA_DEV5_USB_OTG_OEP_2_10, - DB5500_DMA_DEV6_USB_OTG_OEP_3_11, - DB5500_DMA_DEV20_USB_OTG_OEP_4_12, - DB5500_DMA_DEV21_USB_OTG_OEP_5_13, - DB5500_DMA_DEV22_USB_OTG_OEP_6_14, - DB5500_DMA_DEV23_USB_OTG_OEP_7_15, - DB5500_DMA_DEV38_USB_OTG_OEP_8 -}; - -static const char *db5500_read_soc_id(void) -{ - return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n"); -} - -static struct device * __init db5500_soc_device_init(void) -{ - const char *soc_id = db5500_read_soc_id(); - - return ux500_soc_device_init(soc_id); -} - -struct device * __init u5500_init_devices(void) -{ - struct device *parent; - int i; - - parent = db5500_soc_device_init(); - - db5500_add_gpios(parent); - db5500_pmu_init(); - db5500_dma_init(parent); - db5500_add_rtc(parent); - db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); - - for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++) - db5500_platform_devs[i]->dev.parent = parent; - - platform_add_devices(db5500_platform_devs, - ARRAY_SIZE(db5500_platform_devs)); - - return parent; -} diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 9bd8163896cf..db3c52d56ca4 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -16,6 +16,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/mfd/abx500/ab8500.h> #include <asm/mach/map.h> #include <asm/pmu.h> @@ -34,8 +35,8 @@ static struct map_desc u8500_uart_io_desc[] __initdata = { __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), }; - -static struct map_desc u8500_io_desc[] __initdata = { +/* U8500 and U9540 common io_desc */ +static struct map_desc u8500_common_io_desc[] __initdata = { /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), @@ -49,12 +50,23 @@ static struct map_desc u8500_io_desc[] __initdata = { __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K), __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K), - __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), +}; + +/* U8500 IO map specific description */ +static struct map_desc u8500_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), + +}; + +/* U9540 IO map specific description */ +static struct map_desc u9540_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K), }; void __init u8500_map_io(void) @@ -66,7 +78,12 @@ void __init u8500_map_io(void) ux500_map_io(); - iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); + iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc)); + + if (cpu_is_u9540()) + iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc)); + else + iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } @@ -99,7 +116,7 @@ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) return ret; } -static struct arm_pmu_platdata db8500_pmu_platdata = { +struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; @@ -121,6 +138,10 @@ static struct platform_device *platform_devs[] __initdata = { &db8500_prcmu_device, }; +static struct platform_device *of_platform_devs[] __initdata = { + &u8500_dma40_device, +}; + static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK0_BASE, U8500_GPIOBANK1_BASE, @@ -141,6 +162,7 @@ static void __init db8500_add_gpios(struct device *parent) dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); + dbx500_add_pinctrl(parent, "pinctrl-db8500"); } static int usb_db8500_rx_dma_cfg[] = { @@ -185,7 +207,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(void) +struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) { struct device *parent; int i; @@ -202,7 +224,36 @@ struct device * __init u8500_init_devices(void) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; + db8500_prcmu_device.dev.platform_data = ab8500; + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; } + +/* TODO: Once all pieces are DT:ed, remove completely. */ +struct device * __init u8500_of_init_devices(void) +{ + struct device *parent; + int i; + + parent = db8500_soc_device_init(); + + db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + + platform_device_register_data(parent, + "cpufreq-u8500", -1, NULL, 0); + + for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++) + of_platform_devs[i]->dev.parent = parent; + + /* + * Devices to be DT:ed: + * u8500_dma40_device = todo + * db8500_pmu_device = done + * db8500_prcmu_device = done + */ + platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs)); + + return parent; +} diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index d11f3892a27d..e2360e7c770d 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -10,7 +10,6 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/mfd/db8500-prcmu.h> -#include <linux/mfd/db5500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> #include <linux/sys_soc.h> #include <linux/err.h> @@ -30,6 +29,18 @@ void __iomem *_PRCMU_BASE; +/* + * FIXME: Should we set up the GPIO domain here? + * + * The problem is that we cannot put the interrupt resources into the platform + * device until the irqdomain has been added. Right now, we set the GIC interrupt + * domain from init_irq(), then load the gpio driver from + * core_initcall(nmk_gpio_init) and add the platform devices from + * arch_initcall(customize_machine). + * + * This feels fragile because it depends on the gpio device getting probed + * _before_ any device uses the gpio interrupts. +*/ static const struct of_device_id ux500_dt_irq_match[] = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, {}, @@ -40,10 +51,7 @@ void __init ux500_init_irq(void) void __iomem *dist_base; void __iomem *cpu_base; - if (cpu_is_u5500()) { - dist_base = __io_address(U5500_GIC_DIST_BASE); - cpu_base = __io_address(U5500_GIC_CPU_BASE); - } else if (cpu_is_u8500()) { + if (cpu_is_u8500_family()) { dist_base = __io_address(U8500_GIC_DIST_BASE); cpu_base = __io_address(U8500_GIC_CPU_BASE); } else @@ -60,13 +68,17 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u5500()) - db5500_prcmu_early_init(); - if (cpu_is_u8500()) + if (cpu_is_u8500_family()) db8500_prcmu_early_init(); clk_init(); } +void __init ux500_init_late(void) +{ + clk_debugfs_init(); + clk_init_smp_twd_cpufreq(); +} + static const char * __init ux500_get_machine(void) { return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber()); diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c new file mode 100644 index 000000000000..b54884bd2549 --- /dev/null +++ b/arch/arm/mach-ux500/cpuidle.c @@ -0,0 +1,171 @@ +/* + * Copyright (c) 2012 Linaro : Daniel Lezcano <daniel.lezcano@linaro.org> (IBM) + * + * Based on the work of Rickard Andersson <rickard.andersson@stericsson.com> + * and Jonas Aaberg <jonas.aberg@stericsson.com>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/cpuidle.h> +#include <linux/clockchips.h> +#include <linux/spinlock.h> +#include <linux/atomic.h> +#include <linux/smp.h> +#include <linux/mfd/dbx500-prcmu.h> + +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> + +static atomic_t master = ATOMIC_INIT(0); +static DEFINE_SPINLOCK(master_lock); +static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device); + +static inline int ux500_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + int this_cpu = smp_processor_id(); + bool recouple = false; + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &this_cpu); + + if (atomic_inc_return(&master) == num_online_cpus()) { + + /* With this lock, we prevent the other cpu to exit and enter + * this function again and become the master */ + if (!spin_trylock(&master_lock)) + goto wfi; + + /* decouple the gic from the A9 cores */ + if (prcmu_gic_decouple()) + goto out; + + /* If an error occur, we will have to recouple the gic + * manually */ + recouple = true; + + /* At this state, as the gic is decoupled, if the other + * cpu is in WFI, we have the guarantee it won't be wake + * up, so we can safely go to retention */ + if (!prcmu_is_cpu_in_wfi(this_cpu ? 0 : 1)) + goto out; + + /* The prcmu will be in charge of watching the interrupts + * and wake up the cpus */ + if (prcmu_copy_gic_settings()) + goto out; + + /* Check in the meantime an interrupt did + * not occur on the gic ... */ + if (prcmu_gic_pending_irq()) + goto out; + + /* ... and the prcmu */ + if (prcmu_pending_irq()) + goto out; + + /* Go to the retention state, the prcmu will wait for the + * cpu to go WFI and this is what happens after exiting this + * 'master' critical section */ + if (prcmu_set_power_state(PRCMU_AP_IDLE, true, true)) + goto out; + + /* When we switch to retention, the prcmu is in charge + * of recoupling the gic automatically */ + recouple = false; + + spin_unlock(&master_lock); + } +wfi: + cpu_do_idle(); +out: + atomic_dec(&master); + + if (recouple) { + prcmu_gic_recouple(); + spin_unlock(&master_lock); + } + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &this_cpu); + + return index; +} + +static struct cpuidle_driver ux500_idle_driver = { + .name = "ux500_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states = { + ARM_CPUIDLE_WFI_STATE, + { + .enter = ux500_enter_idle, + .exit_latency = 70, + .target_residency = 260, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "ApIdle", + .desc = "ARM Retention", + }, + }, + .safe_state_index = 0, + .state_count = 2, +}; + +/* + * For each cpu, setup the broadcast timer because we will + * need to migrate the timers for the states >= ApIdle. + */ +static void ux500_setup_broadcast_timer(void *arg) +{ + int cpu = smp_processor_id(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); +} + +int __init ux500_idle_init(void) +{ + int ret, cpu; + struct cpuidle_device *device; + + /* Configure wake up reasons */ + prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | + PRCMU_WAKEUP(ABB)); + + /* + * Configure the timer broadcast for each cpu, that must + * be done from the cpu context, so we use a smp cross + * call with 'on_each_cpu'. + */ + on_each_cpu(ux500_setup_broadcast_timer, NULL, 1); + + ret = cpuidle_register_driver(&ux500_idle_driver); + if (ret) { + printk(KERN_ERR "failed to register ux500 idle driver\n"); + return ret; + } + + for_each_online_cpu(cpu) { + device = &per_cpu(ux500_cpuidle_device, cpu); + device->cpu = cpu; + ret = cpuidle_register_device(device); + if (ret) { + printk(KERN_ERR "Failed to register cpuidle " + "device for cpu%d\n", cpu); + goto out_unregister; + } + } +out: + return ret; + +out_unregister: + for_each_online_cpu(cpu) { + device = &per_cpu(ux500_cpuidle_device, cpu); + cpuidle_unregister_device(device); + } + + cpuidle_unregister_driver(&ux500_idle_driver); + goto out; +} + +device_initcall(ux500_idle_init); diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index c5312a4b49f5..dfdd4a54668d 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -11,7 +11,6 @@ #include <linux/irq.h> #include <linux/slab.h> #include <linux/platform_device.h> -#include <linux/amba/bus.h> #include <plat/gpio-nomadik.h> @@ -19,38 +18,6 @@ #include "devices-common.h" -struct amba_device * -dbx500_add_amba_device(struct device *parent, const char *name, - resource_size_t base, int irq, void *pdata, - unsigned int periphid) -{ - struct amba_device *dev; - int ret; - - dev = amba_device_alloc(name, base, SZ_4K); - if (!dev) - return ERR_PTR(-ENOMEM); - - dev->dma_mask = DMA_BIT_MASK(32); - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - - dev->irq[0] = irq; - - dev->periphid = periphid; - - dev->dev.platform_data = pdata; - - dev->dev.parent = parent; - - ret = amba_device_add(dev, &iomem_resource); - if (ret) { - amba_device_put(dev); - return ERR_PTR(ret); - } - - return dev; -} - static struct platform_device * dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq, struct nmk_gpio_platform_data *pdata) diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 39c74ec82add..ecdd8386cffb 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -11,12 +11,9 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/sys_soc.h> -#include <plat/i2c.h> - -extern struct amba_device * -dbx500_add_amba_device(struct device *parent, const char *name, - resource_size_t base, int irq, void *pdata, - unsigned int periphid); +#include <linux/amba/bus.h> +#include <linux/platform_data/i2c-nomadik.h> +#include <mach/crypto-ux500.h> struct spi_master_cntlr; @@ -25,8 +22,8 @@ dbx500_add_msp_spi(struct device *parent, const char *name, resource_size_t base, int irq, struct spi_master_cntlr *pdata) { - return dbx500_add_amba_device(parent, name, base, irq, - pdata, 0); + return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, + pdata, 0); } static inline struct amba_device * @@ -34,8 +31,8 @@ dbx500_add_spi(struct device *parent, const char *name, resource_size_t base, int irq, struct spi_master_cntlr *pdata, u32 periphid) { - return dbx500_add_amba_device(parent, name, base, irq, - pdata, periphid); + return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, + pdata, periphid); } struct mmci_platform_data; @@ -44,8 +41,8 @@ static inline struct amba_device * dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base, int irq, struct mmci_platform_data *pdata, u32 periphid) { - return dbx500_add_amba_device(parent, name, base, irq, - pdata, periphid); + return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, + pdata, periphid); } struct amba_pl011_data; @@ -54,38 +51,76 @@ static inline struct amba_device * dbx500_add_uart(struct device *parent, const char *name, resource_size_t base, int irq, struct amba_pl011_data *pdata) { - return dbx500_add_amba_device(parent, name, base, irq, pdata, 0); + return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0); } struct nmk_i2c_controller; -static inline struct platform_device * +static inline struct amba_device * dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq, struct nmk_i2c_controller *data) { + /* Conjure a name similar to what the platform device used to have */ + char name[16]; + + snprintf(name, sizeof(name), "nmk-i2c.%d", id); + return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0); +} + +static inline struct amba_device * +dbx500_add_rtc(struct device *parent, resource_size_t base, int irq) +{ + return amba_apb_device_add(parent, "rtc-pl031", base, SZ_4K, irq, + 0, NULL, 0); +} + +struct cryp_platform_data; + +static inline struct platform_device * +dbx500_add_cryp1(struct device *parent, int id, resource_size_t base, int irq, + struct cryp_platform_data *pdata) +{ struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), + DEFINE_RES_MEM(base, SZ_4K), + DEFINE_RES_IRQ(irq), }; struct platform_device_info pdevinfo = { - .parent = parent, - .name = "nmk-i2c", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = data, - .size_data = sizeof(*data), - .dma_mask = DMA_BIT_MASK(32), + .parent = parent, + .name = "cryp1", + .id = id, + .res = res, + .num_res = ARRAY_SIZE(res), + .data = pdata, + .size_data = sizeof(*pdata), + .dma_mask = DMA_BIT_MASK(32), }; return platform_device_register_full(&pdevinfo); } -static inline struct amba_device * -dbx500_add_rtc(struct device *parent, resource_size_t base, int irq) +struct hash_platform_data; + +static inline struct platform_device * +dbx500_add_hash1(struct device *parent, int id, resource_size_t base, + struct hash_platform_data *pdata) { - return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0); + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_4K), + }; + + struct platform_device_info pdevinfo = { + .parent = parent, + .name = "hash1", + .id = id, + .res = res, + .num_res = ARRAY_SIZE(res), + .data = pdata, + .size_data = sizeof(*pdata), + .dma_mask = DMA_BIT_MASK(32), + }; + + return platform_device_register_full(&pdevinfo); } struct nmk_gpio_platform_data; @@ -93,4 +128,16 @@ struct nmk_gpio_platform_data; void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, int irq, struct nmk_gpio_platform_data *pdata); +static inline void +dbx500_add_pinctrl(struct device *parent, const char *name) +{ + struct platform_device_info pdevinfo = { + .parent = parent, + .name = name, + .id = -1, + }; + + platform_device_register_full(&pdevinfo); +} + #endif diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h deleted file mode 100644 index e70955502c35..000000000000 --- a/arch/arm/mach-ux500/devices-db5500.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __DEVICES_DB5500_H -#define __DEVICES_DB5500_H - -#include "devices-common.h" - -#define db5500_add_i2c1(parent, pdata) \ - dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) -#define db5500_add_i2c2(parent, pdata) \ - dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) -#define db5500_add_i2c3(parent, pdata) \ - dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) - -#define db5500_add_msp0_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ - IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ - IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ - IRQ_DB5500_MSP2, pdata) - -#define db5500_add_msp0_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ - IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ - IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ - IRQ_DB5500_MSP2, pdata) - -#define db5500_add_rtc(parent) \ - dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC); - -#define db5500_add_usb(parent, rx_cfg, tx_cfg) \ - ux500_add_usb(parent, U5500_USBOTG_BASE, \ - IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) - -#define db5500_add_sdi0(parent, pdata) \ - dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \ - IRQ_DB5500_SDMMC0, pdata, \ - 0x10480180) -#define db5500_add_sdi1(parent, pdata) \ - dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \ - IRQ_DB5500_SDMMC1, pdata, \ - 0x10480180) -#define db5500_add_sdi2(parent, pdata) \ - dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \ - IRQ_DB5500_SDMMC2, pdata \ - 0x10480180) -#define db5500_add_sdi3(parent, pdata) \ - dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \ - IRQ_DB5500_SDMMC3, pdata \ - 0x10480180) -#define db5500_add_sdi4(parent, pdata) \ - dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \ - IRQ_DB5500_SDMMC4, pdata \ - 0x10480180) - -/* This one has a bad peripheral ID in the U5500 silicon */ -#define db5500_add_spi0(parent, pdata) \ - dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \ - IRQ_DB5500_SPI0, pdata, \ - 0x10080023) -#define db5500_add_spi1(parent, pdata) \ - dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \ - IRQ_DB5500_SPI1, pdata, \ - 0x10080023) -#define db5500_add_spi2(parent, pdata) \ - dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \ - IRQ_DB5500_SPI2, pdata \ - 0x10080023) -#define db5500_add_spi3(parent, pdata) \ - dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \ - IRQ_DB5500_SPI3, pdata \ - 0x10080023) - -#define db5500_add_uart0(parent, plat) \ - dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \ - IRQ_DB5500_UART0, plat) -#define db5500_add_uart1(parent, plat) \ - dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \ - IRQ_DB5500_UART1, plat) -#define db5500_add_uart2(parent, plat) \ - dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \ - IRQ_DB5500_UART2, plat) -#define db5500_add_uart3(parent, plat) \ - dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \ - IRQ_DB5500_UART3, plat) - -#endif diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 6e66d3777ed5..91754a8a0d49 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -104,6 +104,8 @@ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET, [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET, + [DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET, }; /* Mapping between source event lines and physical device address */ @@ -139,6 +141,7 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET, [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET, }; /* Reserved event lines for memcpy only */ diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 9fd93e9da529..3c8010f4fb3f 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -31,10 +31,9 @@ static inline struct amba_device * db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, int irq, struct pl022_ssp_controller *pdata) { - return dbx500_add_amba_device(parent, name, base, irq, pdata, 0); + return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0); } - #define db8500_add_i2c0(parent, pdata) \ dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) #define db8500_add_i2c1(parent, pdata) \ @@ -46,15 +45,6 @@ db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, #define db8500_add_i2c4(parent, pdata) \ dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) -#define db8500_add_msp0_i2s(parent, pdata) \ - dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_i2s(parent, pdata) \ - dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_i2s(parent, pdata) \ - dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_i2s(parent, pdata) \ - dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) - #define db8500_add_msp0_spi(parent, pdata) \ dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \ IRQ_DB8500_MSP0, pdata) @@ -124,4 +114,8 @@ db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \ IRQ_DB8500_UART2, pdata) +#define db8500_add_cryp1(parent, pdata) \ + dbx500_add_cryp1(parent, -1, U8500_CRYP1_BASE, IRQ_DB8500_CRYP1, pdata) +#define db8500_add_hash1(parent, pdata) \ + dbx500_add_hash1(parent, -1, U8500_HASH1_BASE, pdata) #endif diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c deleted file mode 100644 index 41e9470fa0e6..000000000000 --- a/arch/arm/mach-ux500/dma-db5500.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <plat/ste_dma40.h> -#include <mach/setup.h> -#include <mach/hardware.h> - -#include "ste-dma40-db5500.h" - -static struct resource dma40_resources[] = { - [0] = { - .start = U5500_DMA_BASE, - .end = U5500_DMA_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "base", - }, - [1] = { - .start = U5500_DMA_LCPA_BASE, - .end = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1, - .flags = IORESOURCE_MEM, - .name = "lcpa", - }, - [2] = { - .start = IRQ_DB5500_DMA, - .end = IRQ_DB5500_DMA, - .flags = IORESOURCE_IRQ - } -}; - -/* Default configuration for physical memcpy */ -static struct stedma40_chan_cfg dma40_memcpy_conf_phy = { - .mode = STEDMA40_MODE_PHYSICAL, - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_PHY_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_PHY_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; - -/* Default configuration for logical memcpy */ -static struct stedma40_chan_cfg dma40_memcpy_conf_log = { - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; - -/* - * Mapping between soruce event lines and physical device address This was - * created assuming that the event line is tied to a device and therefore the - * address is constant, however this is not true for at least USB, and the - * values are just placeholders for USB. This table is preserved and used for - * now. - */ -static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = { - [DB5500_DMA_DEV24_SDMMC0_RX] = -1, - [DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1, - [DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1, - [DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1, - [DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1, - [DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1, - [DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1, - [DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1, - [DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1, -}; - -/* Mapping between destination event lines and physical device address */ -static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = { - [DB5500_DMA_DEV24_SDMMC0_TX] = -1, - [DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1, - [DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1, - [DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1, - [DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1, - [DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1, - [DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1, - [DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1, - [DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1, -}; - -static int dma40_memcpy_event[] = { - DB5500_DMA_MEMCPY_TX_1, - DB5500_DMA_MEMCPY_TX_2, - DB5500_DMA_MEMCPY_TX_3, - DB5500_DMA_MEMCPY_TX_4, - DB5500_DMA_MEMCPY_TX_5, -}; - -static struct stedma40_platform_data dma40_plat_data = { - .dev_len = ARRAY_SIZE(dma40_rx_map), - .dev_rx = dma40_rx_map, - .dev_tx = dma40_tx_map, - .memcpy = dma40_memcpy_event, - .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), - .memcpy_conf_phy = &dma40_memcpy_conf_phy, - .memcpy_conf_log = &dma40_memcpy_conf_log, - .disabled_channels = {-1}, -}; - -static struct platform_device dma40_device = { - .dev = { - .platform_data = &dma40_plat_data, - }, - .name = "dma40", - .id = 0, - .num_resources = ARRAY_SIZE(dma40_resources), - .resource = dma40_resources -}; - -void __init db5500_dma_init(struct device *parent) -{ - int ret; - - dma40_device.dev.parent = parent; - ret = platform_device_register(&dma40_device); - if (ret) - dev_err(&dma40_device.dev, "unable to register device: %d\n", ret); - -} diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index 15a0f63b2e2b..d1579920139f 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -23,7 +23,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr) { phys_addr_t base = addr & ~0xfff; struct map_desc desc = { - .virtual = IO_ADDRESS(base), + .virtual = UX500_VIRT_ROM, .pfn = __phys_to_pfn(base), .length = SZ_16K, .type = MT_DEVICE, @@ -35,7 +35,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr) local_flush_tlb_all(); flush_cache_all(); - return readl(__io_address(addr)); + return readl(IOMEM(UX500_VIRT_ROM + (addr & 0xfff))); } static void ux500_print_soc_info(unsigned int asicid) @@ -67,6 +67,7 @@ static unsigned int partnumber(unsigned int asicid) * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0 * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2 * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0 + * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx */ void __init ux500_map_io(void) @@ -91,6 +92,10 @@ void __init ux500_map_io(void) /* DB5500v1 */ addr = 0x9001FFF4; break; + + case 0x413fc090: /* DB9540 */ + addr = 0xFFFFDBF4; + break; } if (addr) diff --git a/arch/arm/mach-ux500/include/mach/crypto-ux500.h b/arch/arm/mach-ux500/include/mach/crypto-ux500.h new file mode 100644 index 000000000000..5b2d0817e26a --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/crypto-ux500.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef _CRYPTO_UX500_H +#define _CRYPTO_UX500_H +#include <linux/dmaengine.h> +#include <plat/ste_dma40.h> + +struct hash_platform_data { + void *mem_to_engine; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +struct cryp_platform_data { + struct stedma40_chan_cfg mem_to_engine; + struct stedma40_chan_cfg engine_to_mem; +}; + +#endif diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h deleted file mode 100644 index 8e714bcb099f..000000000000 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_DB5500_REGS_H -#define __MACH_DB5500_REGS_H - -#define U5500_PER1_BASE 0xA0020000 -#define U5500_PER2_BASE 0xA0010000 -#define U5500_PER3_BASE 0x80140000 -#define U5500_PER4_BASE 0x80150000 -#define U5500_PER5_BASE 0x80100000 -#define U5500_PER6_BASE 0x80120000 - -#define U5500_GIC_DIST_BASE 0xA0411000 -#define U5500_GIC_CPU_BASE 0xA0410100 -#define U5500_DMA_BASE 0x90030000 -#define U5500_STM_BASE 0x90020000 -#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000) -#define U5500_MCDE_BASE 0xA0400000 -#define U5500_MODEM_BASE 0xB0000000 -#define U5500_L2CC_BASE 0xA0412000 -#define U5500_SCU_BASE 0xA0410000 -#define U5500_DSI1_BASE 0xA0401000 -#define U5500_DSI2_BASE 0xA0402000 -#define U5500_SIA_BASE 0xA0100000 -#define U5500_SVA_BASE 0x80200000 -#define U5500_HSEM_BASE 0xA0000000 -#define U5500_NAND0_BASE 0x60000000 -#define U5500_NAND1_BASE 0x70000000 -#define U5500_TWD_BASE 0xa0410600 -#define U5500_ICN_BASE 0xA0040000 -#define U5500_B2R2_BASE 0xa0200000 -#define U5500_BOOT_ROM_BASE 0x90000000 - -#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) -#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) -#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000) -#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000) -#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000) -#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000) -#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000) -#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000) - -#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000) -#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000) -#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000) - -#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000) -#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000) -#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000) -#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000) - -#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000) -#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000) -#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000) -#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000) -#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000) -#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000) -#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000) -#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000) -#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338) -#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450) -#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) -#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) -#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000) -#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) -#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000) -#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000) -#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000) - -#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) -#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) -#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000) -#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000) -#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000) -#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000) -#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000) -#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000) -#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000) -#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000) -#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000) -#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000) -#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000) -#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000) -#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000) -#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000) -#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000) - -#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000) -#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) -#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) -#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) -#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100) -#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) -#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) -#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) -#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000) -#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000) -#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000) - -#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE -#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80) -#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE -#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE -#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE -#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE -#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) -#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) - -#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000) -#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40) -#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F) -#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60) -#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F) -#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80) -#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F) -#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0) -#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF) -#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00) -#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F) -#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) -#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) - -#define U5500_ACCCON_BASE_SEC (0xBFFF0000) -#define U5500_ACCCON_BASE (0xBFFF1000) -#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020) -#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC) -#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4) - -#define U5500_ESRAM_BASE 0x40000000 -#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 -#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET) - -#define U5500_MCDE_SIZE 0x1000 -#define U5500_DSI_LINK_SIZE 0x1000 -#define U5500_DSI_LINK_COUNT 0x2 -#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE) -#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 9ec20b96d8f2..1530d493879d 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -41,6 +41,10 @@ /* ASIC ID is at 0xbf4 offset within this region */ #define U8500_ASIC_ID_BASE 0x9001D000 +#define U9540_BOOT_ROM_BASE 0xFFFE0000 +/* ASIC ID is at 0xbf4 offset within this region */ +#define U9540_ASIC_ID_BASE 0xFFFFD000 + #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER7_BASE 0xa03d0000 #define U8500_PER5_BASE 0xa03e0000 @@ -96,7 +100,9 @@ #define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) +#define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000) #define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000) #define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) #define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) #define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 8d74d927d4e2..67035223334a 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -20,10 +20,6 @@ * built, so that there's some hint during the build that something is wrong. */ -#ifdef CONFIG_UX500_SOC_DB5500 -#define __UX500_UART(n) U5500_UART##n##_BASE -#endif - #ifdef CONFIG_UX500_SOC_DB8500 #define __UX500_UART(n) U8500_UART##n##_BASE #endif diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index 5f6cb71fc62d..cbc6f1e4104d 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -10,11 +10,13 @@ struct platform_device; struct amba_device; -extern struct platform_device u5500_gpio_devs[]; extern struct platform_device u8500_gpio_devs[]; extern struct amba_device ux500_pl031_device; +extern struct platform_device ux500_hash1_device; +extern struct platform_device ux500_cryp1_device; + extern struct platform_device u8500_dma40_device; extern struct platform_device ux500_ske_keypad_device; diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index f84698936d36..28d16e744bfd 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -17,6 +17,8 @@ */ #define U8500_IO_VIRTUAL 0xf0000000 #define U8500_IO_PHYSICAL 0xa0000000 +/* This is where we map in the ROM to check ASIC IDs */ +#define UX500_VIRT_ROM 0xf0000000 /* This macro is used in assembly, so no cast */ #define IO_ADDRESS(x) \ @@ -24,13 +26,16 @@ /* typesafe io address */ #define __io_address(n) IOMEM(IO_ADDRESS(n)) + /* Used by some plat-nomadik code */ #define io_p2v(n) __io_address(n) #include <mach/db8500-regs.h> -#include <mach/db5500-regs.h> #define MSP_TX_RX_REG_OFFSET 0 +#define CRYP1_RX_REG_OFFSET 0x10 +#define CRYP1_TX_REG_OFFSET 0x8 +#define HASH1_TX_REG_OFFSET 0x4 #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h index 833d6a6edc9b..c6e2db9e9e51 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/include/mach/id.h @@ -41,6 +41,16 @@ static inline bool __attribute_const__ cpu_is_u8500(void) return dbx500_partnumber() == 0x8500; } +static inline bool __attribute_const__ cpu_is_u9540(void) +{ + return dbx500_partnumber() == 0x9540; +} + +static inline bool cpu_is_u8500_family(void) +{ + return cpu_is_u8500() || cpu_is_u9540(); +} + static inline bool __attribute_const__ cpu_is_u5500(void) { return dbx500_partnumber() == 0x5500; @@ -111,7 +121,12 @@ static inline bool cpu_is_u8500v21(void) static inline bool cpu_is_u8500v20_or_later(void) { - return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11(); + /* + * U9540 has so much in common with U8500 that is is considered a + * U8500 variant. + */ + return cpu_is_u9540() || + (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11()); } static inline bool ux500_is_svp(void) diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h deleted file mode 100644 index 29d972c7717b..000000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_BOARD_U5500_H -#define __MACH_IRQS_BOARD_U5500_H - -#define AB5500_NR_IRQS 5 -#define IRQ_AB5500_BASE IRQ_BOARD_START -#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS) - -#define U5500_IRQ_END IRQ_AB5500_END - -#if IRQ_BOARD_END < U5500_IRQ_END -#undef IRQ_BOARD_END -#define IRQ_BOARD_END U5500_IRQ_END -#endif - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h deleted file mode 100644 index 77239776a6f2..000000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_DB5500_H -#define __MACH_IRQS_DB5500_H - -#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4) -#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6) -#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7) -#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8) -#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9) -#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10) -#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11) -#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12) -#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13) -#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14) -#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15) -#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16) -#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17) -#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18) -#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19) -#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20) -#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21) -#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22) -#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23) -#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24) -#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25) -#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26) -#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27) -#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28) -#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29) -#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30) -#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31) -#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33) -#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34) -#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35) -#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36) -#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37) -#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38) -#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39) -#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40) -#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41) -#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42) -#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43) -#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44) -#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45) -#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46) -#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47) -#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48) -#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50) -#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52) -#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53) -#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55) -#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56) -#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57) -#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59) -#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60) -#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61) -#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63) -#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65) -#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96) -#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98) -#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101) -#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108) -#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109) -#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110) -#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112) -#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113) -#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114) -#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115) -#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116) -#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118) -#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119) -#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120) -#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121) -#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122) -#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123) -#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124) -#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) -#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) - -#ifdef CONFIG_UX500_SOC_DB5500 - -/* - * After the GPIO ones we reserve a range of IRQ:s in which virtual - * IRQ:s representing modem IRQ:s can be allocated - */ -#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START -#define IRQ_MODEM_EVENTS_NBR 72 -#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) - -/* List of virtual IRQ:s that are allocated from the range above */ -#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) -#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) -#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) - -/* - * We may have several SoCs, but only one will run at a - * time, so the one with most IRQs will bump this ahead, - * but the IRQ_SOC_START remains the same for either SoC. - */ -#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END -#undef IRQ_SOC_END -#define IRQ_SOC_END IRQ_MODEM_EVENTS_END -#endif - -#endif /* CONFIG_UX500_SOC_DB5500 */ - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index c23a6b5f0c4e..e8928548b6a3 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -24,7 +24,7 @@ */ #define IRQ_MTU0 (IRQ_SHPI_START + 4) -#define DBX500_NR_INTERNAL_IRQS 160 +#define DBX500_NR_INTERNAL_IRQS 166 /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 288 @@ -36,7 +36,6 @@ /* This will be overridden by SoC-specific irq headers */ #define IRQ_SOC_END IRQ_SOC_START -#include <mach/irqs-db5500.h> #include <mach/irqs-db8500.h> #define IRQ_BOARD_START IRQ_SOC_END @@ -47,10 +46,6 @@ #include <mach/irqs-board-mop500.h> #endif -#ifdef CONFIG_MACH_U5500 -#include <mach/irqs-board-u5500.h> -#endif - #define NR_IRQS IRQ_BOARD_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h deleted file mode 100644 index 7f9da4d2fbda..000000000000 --- a/arch/arm/mach-ux500/include/mach/mbox-db5500.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __INC_STE_MBOX_H -#define __INC_STE_MBOX_H - -#define MBOX_BUF_SIZE 16 -#define MBOX_NAME_SIZE 8 - -/** - * mbox_recv_cb_t - Definition of the mailbox callback. - * @mbox_msg: The mailbox message. - * @priv: The clients private data as specified in the call to mbox_setup. - * - * This function will be called upon reception of new mailbox messages. - */ -typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv); - -/** - * struct mbox - Mailbox instance struct - * @list: Linked list head. - * @pdev: Pointer to device struct. - * @cb: Callback function. Will be called - * when new data is received. - * @client_data: Clients private data. Will be sent back - * in the callback function. - * @virtbase_peer: Virtual address for outgoing mailbox. - * @virtbase_local: Virtual address for incoming mailbox. - * @buffer: Then internal queue for outgoing messages. - * @name: Name of this mailbox. - * @buffer_available: Completion variable to achieve "blocking send". - * This variable will be signaled when there is - * internal buffer space available. - * @client_blocked: To keep track if any client is currently - * blocked. - * @lock: Spinlock to protect this mailbox instance. - * @write_index: Index in internal buffer to write to. - * @read_index: Index in internal buffer to read from. - * @allocated: Indicates whether this particular mailbox - * id has been allocated by someone. - */ -struct mbox { - struct list_head list; - struct platform_device *pdev; - mbox_recv_cb_t *cb; - void *client_data; - void __iomem *virtbase_peer; - void __iomem *virtbase_local; - u32 buffer[MBOX_BUF_SIZE]; - char name[MBOX_NAME_SIZE]; - struct completion buffer_available; - u8 client_blocked; - spinlock_t lock; - u8 write_index; - u8 read_index; - bool allocated; -}; - -/** - * mbox_setup - Set up a mailbox and return its instance. - * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU, - * 2 for modem DSP. - * @mbox_cb: Pointer to the callback function to be called when a new message - * is received. - * @priv: Client user data which will be returned in the callback. - * - * Returns a mailbox instance to be specified in subsequent calls to mbox_send. - */ -struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv); - -/** - * mbox_send - Send a mailbox message. - * @mbox: Mailbox instance (returned by mbox_setup) - * @mbox_msg: The mailbox message to send. - * @block: Specifies whether this call will block until send is possible, - * or return an error if the mailbox buffer is full. - * - * Returns 0 on success or a negative error code on error. -ENOMEM indicates - * that the internal buffer is full and you have to try again later (or - * specify "block" in order to block until send is possible). - */ -int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block); - -#endif /*INC_STE_MBOX_H*/ diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h new file mode 100644 index 000000000000..798be19129ef --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/msp.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __MSP_H +#define __MSP_H + +#include <plat/ste_dma40.h> + +enum msp_i2s_id { + MSP_I2S_0 = 0, + MSP_I2S_1, + MSP_I2S_2, + MSP_I2S_3, +}; + +/* Platform data structure for a MSP I2S-device */ +struct msp_i2s_platform_data { + enum msp_i2s_id id; + struct stedma40_chan_cfg *msp_i2s_dma_rx; + struct stedma40_chan_cfg *msp_i2s_dma_tx; + int (*msp_i2s_init) (void); + int (*msp_i2s_exit) (void); +}; + +#endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 3dc00ffa7bfa..7914e5eaa9c7 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -13,19 +13,15 @@ #include <asm/mach/time.h> #include <linux/init.h> +#include <linux/mfd/abx500/ab8500.h> void __init ux500_map_io(void); -extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u5500_init_devices(void); -extern struct device * __init u8500_init_devices(void); +extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); extern void __init ux500_init_irq(void); - -extern void __init u5500_sdi_init(struct device *parent); - -extern void __init db5500_dma_init(struct device *parent); +extern void __init ux500_init_late(void); extern struct device *ux500_soc_device_init(const char *soc_id); diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 6fb3c4b0105d..34775baadaea 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -50,11 +50,8 @@ static void flush(void) static inline void arch_decomp_setup(void) { - /* Check in run time if we run on an U8500 or U5500 */ - if (machine_is_u5500()) - ux500_uart_base = U5500_UART0_BASE; - else - ux500_uart_base = U8500_UART2_BASE; + /* Use machine_is_foo() macro if you need to switch base someday */ + ux500_uart_base = U8500_UART2_BASE; } #define arch_decomp_wdog() /* nothing to do here */ diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c deleted file mode 100644 index 2b2d51caf9d8..000000000000 --- a/arch/arm/mach-ux500/mbox-db5500.c +++ /dev/null @@ -1,565 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -/* - * Mailbox nomenclature: - * - * APE MODEM - * mbox pairX - * .......................... - * . . - * . peer . - * . send ---- . - * . --> | | . - * . | | . - * . ---- . - * . . - * . local . - * . rec ---- . - * . | | <-- . - * . | | . - * . ---- . - * ......................... - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/completion.h> -#include <mach/mbox-db5500.h> - -#define MBOX_NAME "mbox" - -#define MBOX_FIFO_DATA 0x000 -#define MBOX_FIFO_ADD 0x004 -#define MBOX_FIFO_REMOVE 0x008 -#define MBOX_FIFO_THRES_FREE 0x00C -#define MBOX_FIFO_THRES_OCCUP 0x010 -#define MBOX_FIFO_STATUS 0x014 - -#define MBOX_DISABLE_IRQ 0x4 -#define MBOX_ENABLE_IRQ 0x0 -#define MBOX_LATCH 1 - -/* Global list of all mailboxes */ -static struct list_head mboxs = LIST_HEAD_INIT(mboxs); - -static struct mbox *get_mbox_with_id(u8 id) -{ - u8 i; - struct list_head *pos = &mboxs; - for (i = 0; i <= id; i++) - pos = pos->next; - - return (struct mbox *) list_entry(pos, struct mbox, list); -} - -int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block) -{ - int res = 0; - - spin_lock(&mbox->lock); - - dev_dbg(&(mbox->pdev->dev), - "About to buffer 0x%X to mailbox 0x%X." - " ri = %d, wi = %d\n", - mbox_msg, (u32)mbox, mbox->read_index, - mbox->write_index); - - /* Check if write buffer is full */ - while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) { - if (!block) { - dev_dbg(&(mbox->pdev->dev), - "Buffer full in non-blocking call! " - "Returning -ENOMEM!\n"); - res = -ENOMEM; - goto exit; - } - spin_unlock(&mbox->lock); - dev_dbg(&(mbox->pdev->dev), - "Buffer full in blocking call! Sleeping...\n"); - mbox->client_blocked = 1; - wait_for_completion(&mbox->buffer_available); - dev_dbg(&(mbox->pdev->dev), - "Blocking send was woken up! Trying again...\n"); - spin_lock(&mbox->lock); - } - - mbox->buffer[mbox->write_index] = mbox_msg; - mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE; - - /* - * Indicate that we want an IRQ as soon as there is a slot - * in the FIFO - */ - writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - -exit: - spin_unlock(&mbox->lock); - return res; -} -EXPORT_SYMBOL(mbox_send); - -#if defined(CONFIG_DEBUG_FS) -/* - * Expected input: <value> <nbr sends> - * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times - */ -static ssize_t mbox_write_fifo(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) -{ - unsigned long mbox_mess; - unsigned long nbr_sends; - unsigned long i; - char int_buf[16]; - char *token; - char *val; - - struct mbox *mbox = (struct mbox *) dev->platform_data; - - strncpy((char *) &int_buf, buf, sizeof(int_buf)); - token = (char *) &int_buf; - - /* Parse message */ - val = strsep(&token, " "); - if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0)) - mbox_mess = 0xDEADBEEF; - - val = strsep(&token, " "); - if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0)) - nbr_sends = 1; - - dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n", - mbox_mess, nbr_sends, (u32) mbox); - - for (i = 0; i < nbr_sends; i++) - mbox_send(mbox, mbox_mess, true); - - return count; -} - -static ssize_t mbox_read_fifo(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int mbox_value; - struct mbox *mbox = (struct mbox *) dev->platform_data; - - if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0) - return sprintf(buf, "Mailbox is empty\n"); - - mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); - writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); - - return sprintf(buf, "0x%X\n", mbox_value); -} - -static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); - -static int mbox_show(struct seq_file *s, void *data) -{ - struct list_head *pos; - u8 mbox_index = 0; - - list_for_each(pos, &mboxs) { - struct mbox *m = - (struct mbox *) list_entry(pos, struct mbox, list); - if (m == NULL) { - seq_printf(s, - "Unable to retrieve mailbox %d\n", - mbox_index); - continue; - } - - spin_lock(&m->lock); - if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) { - seq_printf(s, "MAILBOX %d not setup or corrupt\n", - mbox_index); - spin_unlock(&m->lock); - continue; - } - - seq_printf(s, - "===========================\n" - " MAILBOX %d\n" - " PEER MAILBOX DUMP\n" - "---------------------------\n" - "FIFO: 0x%X (%d)\n" - "Free Threshold: 0x%.2X (%d)\n" - "Occupied Threshold: 0x%.2X (%d)\n" - "Status: 0x%.2X (%d)\n" - " Free spaces (ot): %d (%d)\n" - " Occup spaces (ot): %d (%d)\n" - "===========================\n" - " LOCAL MAILBOX DUMP\n" - "---------------------------\n" - "FIFO: 0x%.X (%d)\n" - "Free Threshold: 0x%.2X (%d)\n" - "Occupied Threshold: 0x%.2X (%d)\n" - "Status: 0x%.2X (%d)\n" - " Free spaces (ot): %d (%d)\n" - " Occup spaces (ot): %d (%d)\n" - "===========================\n" - "write_index: %d\n" - "read_index : %d\n" - "===========================\n" - "\n", - mbox_index, - readl(m->virtbase_peer + MBOX_FIFO_DATA), - readl(m->virtbase_peer + MBOX_FIFO_DATA), - readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_peer + MBOX_FIFO_STATUS), - readl(m->virtbase_peer + MBOX_FIFO_STATUS), - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7, - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1, - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7, - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1, - readl(m->virtbase_local + MBOX_FIFO_DATA), - readl(m->virtbase_local + MBOX_FIFO_DATA), - readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_local + MBOX_FIFO_STATUS), - readl(m->virtbase_local + MBOX_FIFO_STATUS), - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7, - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1, - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7, - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1, - m->write_index, m->read_index); - mbox_index++; - spin_unlock(&m->lock); - } - - return 0; -} - -static int mbox_open(struct inode *inode, struct file *file) -{ - return single_open(file, mbox_show, NULL); -} - -static const struct file_operations mbox_operations = { - .owner = THIS_MODULE, - .open = mbox_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - -static irqreturn_t mbox_irq(int irq, void *arg) -{ - u32 mbox_value; - int nbr_occup; - int nbr_free; - struct mbox *mbox = (struct mbox *) arg; - - spin_lock(&mbox->lock); - - dev_dbg(&(mbox->pdev->dev), - "mbox IRQ [%d] received. ri = %d, wi = %d\n", - irq, mbox->read_index, mbox->write_index); - - /* - * Check if we have any outgoing messages, and if there is space for - * them in the FIFO. - */ - if (mbox->read_index != mbox->write_index) { - /* - * Check by reading FREE for LOCAL since that indicates - * OCCUP for PEER - */ - nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS) - >> 4) & 0x7; - dev_dbg(&(mbox->pdev->dev), - "Status indicates %d empty spaces in the FIFO!\n", - nbr_free); - - while ((nbr_free > 0) && - (mbox->read_index != mbox->write_index)) { - /* Write the message and latch it into the FIFO */ - writel(mbox->buffer[mbox->read_index], - (mbox->virtbase_peer + MBOX_FIFO_DATA)); - writel(MBOX_LATCH, - (mbox->virtbase_peer + MBOX_FIFO_ADD)); - dev_dbg(&(mbox->pdev->dev), - "Wrote message 0x%X to addr 0x%X\n", - mbox->buffer[mbox->read_index], - (u32) (mbox->virtbase_peer + MBOX_FIFO_DATA)); - - nbr_free--; - mbox->read_index = - (mbox->read_index + 1) % MBOX_BUF_SIZE; - } - - /* - * Check if we still want IRQ:s when there is free - * space to send - */ - if (mbox->read_index != mbox->write_index) { - dev_dbg(&(mbox->pdev->dev), - "Still have messages to send, but FIFO full. " - "Request IRQ again!\n"); - writel(MBOX_ENABLE_IRQ, - mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - } else { - dev_dbg(&(mbox->pdev->dev), - "No more messages to send. " - "Do not request IRQ again!\n"); - writel(MBOX_DISABLE_IRQ, - mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - } - - /* - * Check if we can signal any blocked clients that it is OK to - * start buffering again - */ - if (mbox->client_blocked && - (((mbox->write_index + 1) % MBOX_BUF_SIZE) - != mbox->read_index)) { - dev_dbg(&(mbox->pdev->dev), - "Waking up blocked client\n"); - complete(&mbox->buffer_available); - mbox->client_blocked = 0; - } - } - - /* Check if we have any incoming messages */ - nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7; - if (nbr_occup == 0) - goto exit; - - if (mbox->cb == NULL) { - dev_dbg(&(mbox->pdev->dev), "No receive callback registered, " - "leaving %d incoming messages in fifo!\n", nbr_occup); - goto exit; - } - - /* Read and acknowledge the message */ - mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); - writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); - - /* Notify consumer of new mailbox message */ - dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n", - mbox_value); - mbox->cb(mbox_value, mbox->client_data); - -exit: - dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n", - mbox->read_index, mbox->write_index); - spin_unlock(&mbox->lock); - - return IRQ_HANDLED; -} - -/* Setup is executed once for each mbox pair */ -struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv) -{ - struct resource *resource; - int irq; - int res; - struct mbox *mbox; - - mbox = get_mbox_with_id(mbox_id); - if (mbox == NULL) { - dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n", - mbox_id); - goto exit; - } - - /* - * Check if mailbox has been allocated to someone else, - * otherwise allocate it - */ - if (mbox->allocated) { - dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n", - mbox_id); - mbox = NULL; - goto exit; - } - mbox->allocated = true; - - dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n", - mbox_id, (u32)mbox); - - mbox->client_data = priv; - mbox->cb = mbox_cb; - - /* Get addr for peer mailbox and ioremap it */ - resource = platform_get_resource_byname(mbox->pdev, - IORESOURCE_MEM, - "mbox_peer"); - if (resource == NULL) { - dev_err(&(mbox->pdev->dev), - "Unable to retrieve mbox peer resource\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "Resource name: %s start: 0x%X, end: 0x%X\n", - resource->name, resource->start, resource->end); - mbox->virtbase_peer = ioremap(resource->start, resource_size(resource)); - if (!mbox->virtbase_peer) { - dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n", - resource->start, resource->end, (u32) mbox->virtbase_peer); - - /* Get addr for local mailbox and ioremap it */ - resource = platform_get_resource_byname(mbox->pdev, - IORESOURCE_MEM, - "mbox_local"); - if (resource == NULL) { - dev_err(&(mbox->pdev->dev), - "Unable to retrieve mbox local resource\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "Resource name: %s start: 0x%X, end: 0x%X\n", - resource->name, resource->start, resource->end); - mbox->virtbase_local = ioremap(resource->start, resource_size(resource)); - if (!mbox->virtbase_local) { - dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n", - resource->start, resource->end, (u32) mbox->virtbase_peer); - - init_completion(&mbox->buffer_available); - mbox->client_blocked = 0; - - /* Get IRQ for mailbox and allocate it */ - irq = platform_get_irq_byname(mbox->pdev, "mbox_irq"); - if (irq < 0) { - dev_err(&(mbox->pdev->dev), - "Unable to retrieve mbox irq resource\n"); - mbox = NULL; - goto exit; - } - - dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq); - res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox); - if (res < 0) { - dev_err(&(mbox->pdev->dev), - "Unable to allocate mbox irq %d\n", irq); - mbox = NULL; - goto exit; - } - - /* Set up mailbox to not launch IRQ on free space in mailbox */ - writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - - /* - * Set up mailbox to launch IRQ on new message if we have - * a callback set. If not, do not raise IRQ, but keep message - * in FIFO for manual retrieval - */ - if (mbox_cb != NULL) - writel(MBOX_ENABLE_IRQ, - mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); - else - writel(MBOX_DISABLE_IRQ, - mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); - -#if defined(CONFIG_DEBUG_FS) - res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo); - if (res != 0) - dev_warn(&(mbox->pdev->dev), - "Unable to create mbox sysfs entry"); - - (void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL, - NULL, &mbox_operations); -#endif - - dev_info(&(mbox->pdev->dev), - "Mailbox driver with index %d initiated!\n", mbox_id); - -exit: - return mbox; -} -EXPORT_SYMBOL(mbox_setup); - - -int __init mbox_probe(struct platform_device *pdev) -{ - struct mbox local_mbox; - struct mbox *mbox; - int res = 0; - dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev); - - memset(&local_mbox, 0x0, sizeof(struct mbox)); - - /* Associate our mbox data with the platform device */ - res = platform_device_add_data(pdev, - (void *) &local_mbox, - sizeof(struct mbox)); - if (res != 0) { - dev_err(&(pdev->dev), - "Unable to allocate driver platform data!\n"); - goto exit; - } - - mbox = (struct mbox *) pdev->dev.platform_data; - mbox->pdev = pdev; - mbox->write_index = 0; - mbox->read_index = 0; - - INIT_LIST_HEAD(&(mbox->list)); - list_add_tail(&(mbox->list), &mboxs); - - sprintf(mbox->name, "%s", MBOX_NAME); - spin_lock_init(&mbox->lock); - - dev_info(&(pdev->dev), "Mailbox driver loaded\n"); - -exit: - return res; -} - -static struct platform_driver mbox_driver = { - .driver = { - .name = MBOX_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init mbox_init(void) -{ - return platform_driver_probe(&mbox_driver, mbox_probe); -} - -module_init(mbox_init); - -void __exit mbox_exit(void) -{ - platform_driver_unregister(&mbox_driver); -} - -module_exit(mbox_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("MBOX driver"); diff --git a/arch/arm/mach-ux500/modem-irq-db5500.c b/arch/arm/mach-ux500/modem-irq-db5500.c deleted file mode 100644 index 6b86416c94c9..000000000000 --- a/arch/arm/mach-ux500/modem-irq-db5500.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <mach/id.h> - -#define MODEM_INTCON_BASE_ADDR 0xBFFD3000 -#define MODEM_INTCON_SIZE 0xFFF - -#define DEST_IRQ41_OFFSET 0x2A4 -#define DEST_IRQ43_OFFSET 0x2AC -#define DEST_IRQ45_OFFSET 0x2B4 - -#define PRIO_IRQ41_OFFSET 0x6A4 -#define PRIO_IRQ43_OFFSET 0x6AC -#define PRIO_IRQ45_OFFSET 0x6B4 - -#define ALLOW_IRQ_OFFSET 0x104 - -#define MODEM_INTCON_CPU_NBR 0x1 -#define MODEM_INTCON_PRIO_HIGH 0x0 - -#define MODEM_INTCON_ALLOW_IRQ41 0x0200 -#define MODEM_INTCON_ALLOW_IRQ43 0x0800 -#define MODEM_INTCON_ALLOW_IRQ45 0x2000 - -#define MODEM_IRQ_REG_OFFSET 0x4 - -struct modem_irq { - void __iomem *modem_intcon_base; -}; - - -static void setup_modem_intcon(void __iomem *modem_intcon_base) -{ - /* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */ - writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET); - writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET); - writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET); - - /* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */ - writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET); - writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET); - writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET); - - /* IC_ALLOW_ARRAY - IRQ enable */ - writel(MODEM_INTCON_ALLOW_IRQ41 | - MODEM_INTCON_ALLOW_IRQ43 | - MODEM_INTCON_ALLOW_IRQ45, - modem_intcon_base + ALLOW_IRQ_OFFSET); -} - -static irqreturn_t modem_cpu_irq_handler(int irq, void *data) -{ - int real_irq; - int virt_irq; - struct modem_irq *mi = (struct modem_irq *)data; - - /* Read modem side IRQ number from modem IRQ controller */ - real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF; - virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq; - - pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X " - "which will be 0x%X (%d) which translates to " - "virtual IRQ 0x%X (%d)!\n", - (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET, - real_irq, - real_irq & 0xFF, - real_irq & 0xFF, - virt_irq, - virt_irq); - - if (virt_irq != 0) - generic_handle_irq(virt_irq); - - pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq); - - return IRQ_HANDLED; -} - -static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip) -{ - irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); - - pr_debug("modem_irq: Created virtual IRQ %d\n", irq); -} - -static int modem_irq_init(void) -{ - int err; - static struct irq_chip modem_irq_chip; - struct modem_irq *mi; - - if (!cpu_is_u5500()) - return -ENODEV; - - pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n", - IRQ_DB5500_MODEM); - - mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL); - if (!mi) { - pr_err("modem_irq: Could not allocate device\n"); - return -ENOMEM; - } - - mi->modem_intcon_base = - ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE); - pr_debug("modem_irq: ioremapped modem_intcon_base from " - "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR, - (u32)mi->modem_intcon_base); - - setup_modem_intcon(mi->modem_intcon_base); - - modem_irq_chip = dummy_irq_chip; - modem_irq_chip.name = "modem_irq"; - - /* Create the virtual IRQ:s needed */ - create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip); - create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip); - create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip); - - err = request_threaded_irq(IRQ_DB5500_MODEM, NULL, - modem_cpu_irq_handler, IRQF_ONESHOT, - "modem_irq", mi); - if (err) - pr_err("modem_irq: Could not register IRQ %d\n", - IRQ_DB5500_MODEM); - - return 0; -} - -arch_initcall(modem_irq_init); diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h deleted file mode 100644 index bf50c21fe69d..000000000000 --- a/arch/arm/mach-ux500/pins-db5500.h +++ /dev/null @@ -1,620 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - */ - -#ifndef __MACH_DB5500_PINS_H -#define __MACH_DB5500_PINS_H - -#define GPIO0_GPIO PIN_CFG(0, GPIO) -#define GPIO0_SM_CS3n PIN_CFG(0, ALT_A) - -#define GPIO1_GPIO PIN_CFG(1, GPIO) -#define GPIO1_SM_A3 PIN_CFG(1, ALT_A) - -#define GPIO2_GPIO PIN_CFG(2, GPIO) -#define GPIO2_SM_A4 PIN_CFG(2, ALT_A) -#define GPIO2_SM_AVD PIN_CFG(2, ALT_B) - -#define GPIO3_GPIO PIN_CFG(3, GPIO) -#define GPIO3_I2C1_SCL PIN_CFG(3, ALT_A) - -#define GPIO4_GPIO PIN_CFG(4, GPIO) -#define GPIO4_I2C1_SDA PIN_CFG(4, ALT_A) - -#define GPIO5_GPIO PIN_CFG(5, GPIO) -#define GPIO5_MC0_DAT0 PIN_CFG(5, ALT_A) -#define GPIO5_SM_ADQ8 PIN_CFG(5, ALT_B) - -#define GPIO6_GPIO PIN_CFG(6, GPIO) -#define GPIO6_MC0_DAT1 PIN_CFG(6, ALT_A) -#define GPIO6_SM_ADQ0 PIN_CFG(6, ALT_B) - -#define GPIO7_GPIO PIN_CFG(7, GPIO) -#define GPIO7_MC0_DAT2 PIN_CFG(7, ALT_A) -#define GPIO7_SM_ADQ9 PIN_CFG(7, ALT_B) - -#define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_MC0_DAT3 PIN_CFG(8, ALT_A) -#define GPIO8_SM_ADQ1 PIN_CFG(8, ALT_B) - -#define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_MC0_DAT4 PIN_CFG(9, ALT_A) -#define GPIO9_SM_ADQ10 PIN_CFG(9, ALT_B) - -#define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_MC0_DAT5 PIN_CFG(10, ALT_A) -#define GPIO10_SM_ADQ2 PIN_CFG(10, ALT_B) - -#define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_MC0_DAT6 PIN_CFG(11, ALT_A) -#define GPIO11_SM_ADQ11 PIN_CFG(11, ALT_B) - -#define GPIO12_GPIO PIN_CFG(12, GPIO) -#define GPIO12_MC0_DAT7 PIN_CFG(12, ALT_A) -#define GPIO12_SM_ADQ3 PIN_CFG(12, ALT_B) - -#define GPIO13_GPIO PIN_CFG(13, GPIO) -#define GPIO13_MC0_CMD PIN_CFG(13, ALT_A) -#define GPIO13_SM_BUSY0n PIN_CFG(13, ALT_B) -#define GPIO13_SM_WAIT0n PIN_CFG(13, ALT_C) - -#define GPIO14_GPIO PIN_CFG(14, GPIO) -#define GPIO14_MC0_CLK PIN_CFG(14, ALT_A) -#define GPIO14_SM_CS1n PIN_CFG(14, ALT_B) -#define GPIO14_SM_CKO PIN_CFG(14, ALT_C) - -#define GPIO15_GPIO PIN_CFG(15, GPIO) -#define GPIO15_SM_A5 PIN_CFG(15, ALT_A) -#define GPIO15_SM_CLE PIN_CFG(15, ALT_B) - -#define GPIO16_GPIO PIN_CFG(16, GPIO) -#define GPIO16_MC2_CMD PIN_CFG(16, ALT_A) -#define GPIO16_SM_OEn PIN_CFG(16, ALT_B) - -#define GPIO17_GPIO PIN_CFG(17, GPIO) -#define GPIO17_MC2_CLK PIN_CFG(17, ALT_A) -#define GPIO17_SM_WEn PIN_CFG(17, ALT_B) - -#define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_SM_A6 PIN_CFG(18, ALT_A) -#define GPIO18_SM_ALE PIN_CFG(18, ALT_B) -#define GPIO18_SM_AVDn PIN_CFG(18, ALT_C) - -#define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC2_DAT1 PIN_CFG(19, ALT_A) -#define GPIO19_SM_ADQ4 PIN_CFG(19, ALT_B) - -#define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC2_DAT3 PIN_CFG(20, ALT_A) -#define GPIO20_SM_ADQ5 PIN_CFG(20, ALT_B) - -#define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC2_DAT5 PIN_CFG(21, ALT_A) -#define GPIO21_SM_ADQ6 PIN_CFG(21, ALT_B) - -#define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC2_DAT7 PIN_CFG(22, ALT_A) -#define GPIO22_SM_ADQ7 PIN_CFG(22, ALT_B) - -#define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC2_DAT0 PIN_CFG(23, ALT_A) -#define GPIO23_SM_ADQ12 PIN_CFG(23, ALT_B) -#define GPIO23_MC0_DAT1 PIN_CFG(23, ALT_C) - -#define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC2_DAT2 PIN_CFG(24, ALT_A) -#define GPIO24_SM_ADQ13 PIN_CFG(24, ALT_B) -#define GPIO24_MC0_DAT3 PIN_CFG(24, ALT_C) - -#define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC2_DAT4 PIN_CFG(25, ALT_A) -#define GPIO25_SM_ADQ14 PIN_CFG(25, ALT_B) -#define GPIO25_MC0_CMD PIN_CFG(25, ALT_C) - -#define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC2_DAT6 PIN_CFG(26, ALT_A) -#define GPIO26_SM_ADQ15 PIN_CFG(26, ALT_B) - -#define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_SM_CS0n PIN_CFG(27, ALT_A) -#define GPIO27_SM_PS0n PIN_CFG(27, ALT_B) - -#define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_U0_TXD PIN_CFG(28, ALT_A) -#define GPIO28_SM_A0 PIN_CFG(28, ALT_B) - -#define GPIO29_GPIO PIN_CFG(29, GPIO) -#define GPIO29_U0_RXD PIN_CFG(29, ALT_A) -#define GPIO29_SM_A1 PIN_CFG(29, ALT_B) -#define GPIO29_PWM_0 PIN_CFG(29, ALT_C) - -#define GPIO30_GPIO PIN_CFG(30, GPIO) -#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) -#define GPIO30_SM_A2 PIN_CFG(30, ALT_B) -#define GPIO30_PWM_1 PIN_CFG(30, ALT_C) - -#define GPIO31_GPIO PIN_CFG(31, GPIO) -#define GPIO31_MC0_DAT7 PIN_CFG(31, ALT_A) -#define GPIO31_SM_CS2n PIN_CFG(31, ALT_B) -#define GPIO31_PWM_2 PIN_CFG(31, ALT_C) - -#define GPIO32_GPIO PIN_CFG(32, GPIO) -#define GPIO32_MSP0_TCK PIN_CFG(32, ALT_A) -#define GPIO32_ACCI2S0_SCK PIN_CFG(32, ALT_B) - -#define GPIO33_GPIO PIN_CFG(33, GPIO) -#define GPIO33_MSP0_TFS PIN_CFG(33, ALT_A) -#define GPIO33_ACCI2S0_WS PIN_CFG(33, ALT_B) - -#define GPIO34_GPIO PIN_CFG(34, GPIO) -#define GPIO34_MSP0_TXD PIN_CFG(34, ALT_A) -#define GPIO34_ACCI2S0_DLD PIN_CFG(34, ALT_B) - -#define GPIO35_GPIO PIN_CFG(35, GPIO) -#define GPIO35_MSP0_RXD PIN_CFG(35, ALT_A) -#define GPIO35_ACCI2S0_ULD PIN_CFG(35, ALT_B) - -#define GPIO64_GPIO PIN_CFG(64, GPIO) -#define GPIO64_USB_DAT0 PIN_CFG(64, ALT_A) -#define GPIO64_U0_TXD PIN_CFG(64, ALT_B) - -#define GPIO65_GPIO PIN_CFG(65, GPIO) -#define GPIO65_USB_DAT1 PIN_CFG(65, ALT_A) -#define GPIO65_U0_RXD PIN_CFG(65, ALT_B) - -#define GPIO66_GPIO PIN_CFG(66, GPIO) -#define GPIO66_USB_DAT2 PIN_CFG(66, ALT_A) - -#define GPIO67_GPIO PIN_CFG(67, GPIO) -#define GPIO67_USB_DAT3 PIN_CFG(67, ALT_A) - -#define GPIO68_GPIO PIN_CFG(68, GPIO) -#define GPIO68_USB_DAT4 PIN_CFG(68, ALT_A) - -#define GPIO69_GPIO PIN_CFG(69, GPIO) -#define GPIO69_USB_DAT5 PIN_CFG(69, ALT_A) - -#define GPIO70_GPIO PIN_CFG(70, GPIO) -#define GPIO70_USB_DAT6 PIN_CFG(70, ALT_A) - -#define GPIO71_GPIO PIN_CFG(71, GPIO) -#define GPIO71_USB_DAT7 PIN_CFG(71, ALT_A) - -#define GPIO72_GPIO PIN_CFG(72, GPIO) -#define GPIO72_USB_STP PIN_CFG(72, ALT_A) - -#define GPIO73_GPIO PIN_CFG(73, GPIO) -#define GPIO73_USB_DIR PIN_CFG(73, ALT_A) - -#define GPIO74_GPIO PIN_CFG(74, GPIO) -#define GPIO74_USB_NXT PIN_CFG(74, ALT_A) - -#define GPIO75_GPIO PIN_CFG(75, GPIO) -#define GPIO75_USB_XCLK PIN_CFG(75, ALT_A) - -#define GPIO76_GPIO PIN_CFG(76, GPIO) - -#define GPIO77_GPIO PIN_CFG(77, GPIO) -#define GPIO77_ACCTX_ON PIN_CFG(77, ALT_A) - -#define GPIO78_GPIO PIN_CFG(78, GPIO) -#define GPIO78_IRQn PIN_CFG(78, ALT_A) - -#define GPIO79_GPIO PIN_CFG(79, GPIO) -#define GPIO79_ACCSIM_Clk PIN_CFG(79, ALT_A) - -#define GPIO80_GPIO PIN_CFG(80, GPIO) -#define GPIO80_ACCSIM_Da PIN_CFG(80, ALT_A) - -#define GPIO81_GPIO PIN_CFG(81, GPIO) -#define GPIO81_ACCSIM_Reset PIN_CFG(81, ALT_A) - -#define GPIO82_GPIO PIN_CFG(82, GPIO) -#define GPIO82_ACCSIM_DDir PIN_CFG(82, ALT_A) - -#define GPIO96_GPIO PIN_CFG(96, GPIO) -#define GPIO96_MSP1_TCK PIN_CFG(96, ALT_A) -#define GPIO96_PRCMU_DEBUG3 PIN_CFG(96, ALT_B) -#define GPIO96_PRCMU_DEBUG7 PIN_CFG(96, ALT_C) - -#define GPIO97_GPIO PIN_CFG(97, GPIO) -#define GPIO97_MSP1_TFS PIN_CFG(97, ALT_A) -#define GPIO97_PRCMU_DEBUG2 PIN_CFG(97, ALT_B) -#define GPIO97_PRCMU_DEBUG6 PIN_CFG(97, ALT_C) - -#define GPIO98_GPIO PIN_CFG(98, GPIO) -#define GPIO98_MSP1_TXD PIN_CFG(98, ALT_A) -#define GPIO98_PRCMU_DEBUG1 PIN_CFG(98, ALT_B) -#define GPIO98_PRCMU_DEBUG5 PIN_CFG(98, ALT_C) - -#define GPIO99_GPIO PIN_CFG(99, GPIO) -#define GPIO99_MSP1_RXD PIN_CFG(99, ALT_A) -#define GPIO99_PRCMU_DEBUG0 PIN_CFG(99, ALT_B) -#define GPIO99_PRCMU_DEBUG4 PIN_CFG(99, ALT_C) - -#define GPIO100_GPIO PIN_CFG(100, GPIO) -#define GPIO100_I2C0_SCL PIN_CFG(100, ALT_A) - -#define GPIO101_GPIO PIN_CFG(101, GPIO) -#define GPIO101_I2C0_SDA PIN_CFG(101, ALT_A) - -#define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_KP_I0 PIN_CFG(128, ALT_A) -#define GPIO128_BUSMON_D0 PIN_CFG(128, ALT_B) - -#define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_KP_O0 PIN_CFG(129, ALT_A) -#define GPIO129_BUSMON_D1 PIN_CFG(129, ALT_B) - -#define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_KP_I1 PIN_CFG(130, ALT_A) -#define GPIO130_BUSMON_D2 PIN_CFG(130, ALT_B) - -#define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_KP_O1 PIN_CFG(131, ALT_A) -#define GPIO131_BUSMON_D3 PIN_CFG(131, ALT_B) - -#define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_KP_I2 PIN_CFG(132, ALT_A) -#define GPIO132_ETM_D15 PIN_CFG(132, ALT_B) -#define GPIO132_STMAPE_CLK PIN_CFG(132, ALT_C) - -#define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_KP_O2 PIN_CFG(133, ALT_A) -#define GPIO133_ETM_D14 PIN_CFG(133, ALT_B) -#define GPIO133_U0_RXD PIN_CFG(133, ALT_C) - -#define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_KP_I3 PIN_CFG(134, ALT_A) -#define GPIO134_ETM_D13 PIN_CFG(134, ALT_B) -#define GPIO134_STMAPE_DAT0 PIN_CFG(134, ALT_C) - -#define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_KP_O3 PIN_CFG(135, ALT_A) -#define GPIO135_ETM_D12 PIN_CFG(135, ALT_B) -#define GPIO135_STMAPE_DAT1 PIN_CFG(135, ALT_C) - -#define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_KP_I4 PIN_CFG(136, ALT_A) -#define GPIO136_ETM_D11 PIN_CFG(136, ALT_B) -#define GPIO136_STMAPE_DAT2 PIN_CFG(136, ALT_C) - -#define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_KP_O4 PIN_CFG(137, ALT_A) -#define GPIO137_ETM_D10 PIN_CFG(137, ALT_B) -#define GPIO137_STMAPE_DAT3 PIN_CFG(137, ALT_C) - -#define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_KP_I5 PIN_CFG(138, ALT_A) -#define GPIO138_ETM_D9 PIN_CFG(138, ALT_B) -#define GPIO138_U0_TXD PIN_CFG(138, ALT_C) - -#define GPIO139_GPIO PIN_CFG(139, GPIO) -#define GPIO139_KP_O5 PIN_CFG(139, ALT_A) -#define GPIO139_ETM_D8 PIN_CFG(139, ALT_B) -#define GPIO139_BUSMON_D11 PIN_CFG(139, ALT_C) - -#define GPIO140_GPIO PIN_CFG(140, GPIO) -#define GPIO140_KP_I6 PIN_CFG(140, ALT_A) -#define GPIO140_ETM_D7 PIN_CFG(140, ALT_B) -#define GPIO140_STMAPE_CLK PIN_CFG(140, ALT_C) - -#define GPIO141_GPIO PIN_CFG(141, GPIO) -#define GPIO141_KP_O6 PIN_CFG(141, ALT_A) -#define GPIO141_ETM_D6 PIN_CFG(141, ALT_B) -#define GPIO141_U0_RXD PIN_CFG(141, ALT_C) - -#define GPIO142_GPIO PIN_CFG(142, GPIO) -#define GPIO142_KP_I7 PIN_CFG(142, ALT_A) -#define GPIO142_ETM_D5 PIN_CFG(142, ALT_B) -#define GPIO142_STMAPE_DAT0 PIN_CFG(142, ALT_C) - -#define GPIO143_GPIO PIN_CFG(143, GPIO) -#define GPIO143_KP_O7 PIN_CFG(143, ALT_A) -#define GPIO143_ETM_D4 PIN_CFG(143, ALT_B) -#define GPIO143_STMAPE_DAT1 PIN_CFG(143, ALT_C) - -#define GPIO144_GPIO PIN_CFG(144, GPIO) -#define GPIO144_I2C3_SCL PIN_CFG(144, ALT_A) -#define GPIO144_ETM_D3 PIN_CFG(144, ALT_B) -#define GPIO144_STMAPE_DAT2 PIN_CFG(144, ALT_C) - -#define GPIO145_GPIO PIN_CFG(145, GPIO) -#define GPIO145_I2C3_SDA PIN_CFG(145, ALT_A) -#define GPIO145_ETM_D2 PIN_CFG(145, ALT_B) -#define GPIO145_STMAPE_DAT3 PIN_CFG(145, ALT_C) - -#define GPIO146_GPIO PIN_CFG(146, GPIO) -#define GPIO146_PWM_0 PIN_CFG(146, ALT_A) -#define GPIO146_ETM_D1 PIN_CFG(146, ALT_B) - -#define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_PWM_1 PIN_CFG(147, ALT_A) -#define GPIO147_ETM_D0 PIN_CFG(147, ALT_B) - -#define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_PWM_2 PIN_CFG(148, ALT_A) -#define GPIO148_ETM_CLK PIN_CFG(148, ALT_B) - -#define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_CLKOUT_REQn PIN_CFG(160, ALT_A) - -#define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_CLKOUT_0 PIN_CFG(161, ALT_A) - -#define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_CLKOUT_1 PIN_CFG(162, ALT_A) - -#define GPIO163_GPIO PIN_CFG(163, GPIO) - -#define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_GPS_START PIN_CFG(164, ALT_A) - -#define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_SPI1_CS2n PIN_CFG(165, ALT_A) -#define GPIO165_U3_RXD PIN_CFG(165, ALT_B) -#define GPIO165_BUSMON_D20 PIN_CFG(165, ALT_C) - -#define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_SPI1_CS1n PIN_CFG(166, ALT_A) -#define GPIO166_U3_TXD PIN_CFG(166, ALT_B) -#define GPIO166_BUSMON_D21 PIN_CFG(166, ALT_C) - -#define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_SPI1_CS0n PIN_CFG(167, ALT_A) -#define GPIO167_U3_RTSn PIN_CFG(167, ALT_B) -#define GPIO167_BUSMON_D22 PIN_CFG(167, ALT_C) - -#define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_SPI1_RXD PIN_CFG(168, ALT_A) -#define GPIO168_U3_CTSn PIN_CFG(168, ALT_B) -#define GPIO168_BUSMON_D23 PIN_CFG(168, ALT_C) - -#define GPIO169_GPIO PIN_CFG(169, GPIO) -#define GPIO169_SPI1_TXD PIN_CFG(169, ALT_A) -#define GPIO169_DDR_RC PIN_CFG(169, ALT_B) -#define GPIO169_BUSMON_D24 PIN_CFG(169, ALT_C) - -#define GPIO170_GPIO PIN_CFG(170, GPIO) -#define GPIO170_SPI1_CLK PIN_CFG(170, ALT_A) - -#define GPIO171_GPIO PIN_CFG(171, GPIO) -#define GPIO171_MC3_DAT0 PIN_CFG(171, ALT_A) -#define GPIO171_SPI3_RXD PIN_CFG(171, ALT_B) -#define GPIO171_BUSMON_D25 PIN_CFG(171, ALT_C) - -#define GPIO172_GPIO PIN_CFG(172, GPIO) -#define GPIO172_MC3_DAT1 PIN_CFG(172, ALT_A) -#define GPIO172_SPI3_CS1n PIN_CFG(172, ALT_B) -#define GPIO172_BUSMON_D26 PIN_CFG(172, ALT_C) - -#define GPIO173_GPIO PIN_CFG(173, GPIO) -#define GPIO173_MC3_DAT2 PIN_CFG(173, ALT_A) -#define GPIO173_SPI3_CS2n PIN_CFG(173, ALT_B) -#define GPIO173_BUSMON_D27 PIN_CFG(173, ALT_C) - -#define GPIO174_GPIO PIN_CFG(174, GPIO) -#define GPIO174_MC3_DAT3 PIN_CFG(174, ALT_A) -#define GPIO174_SPI3_CS0n PIN_CFG(174, ALT_B) -#define GPIO174_BUSMON_D28 PIN_CFG(174, ALT_C) - -#define GPIO175_GPIO PIN_CFG(175, GPIO) -#define GPIO175_MC3_CMD PIN_CFG(175, ALT_A) -#define GPIO175_SPI3_TXD PIN_CFG(175, ALT_B) -#define GPIO175_BUSMON_D29 PIN_CFG(175, ALT_C) - -#define GPIO176_GPIO PIN_CFG(176, GPIO) -#define GPIO176_MC3_CLK PIN_CFG(176, ALT_A) -#define GPIO176_SPI3_CLK PIN_CFG(176, ALT_B) - -#define GPIO177_GPIO PIN_CFG(177, GPIO) -#define GPIO177_U2_RXD PIN_CFG(177, ALT_A) -#define GPIO177_I2C3_SCL PIN_CFG(177, ALT_B) -#define GPIO177_BUSMON_D30 PIN_CFG(177, ALT_C) - -#define GPIO178_GPIO PIN_CFG(178, GPIO) -#define GPIO178_U2_TXD PIN_CFG(178, ALT_A) -#define GPIO178_I2C3_SDA PIN_CFG(178, ALT_B) -#define GPIO178_BUSMON_D31 PIN_CFG(178, ALT_C) - -#define GPIO179_GPIO PIN_CFG(179, GPIO) -#define GPIO179_U2_CTSn PIN_CFG(179, ALT_A) -#define GPIO179_U3_RXD PIN_CFG(179, ALT_B) -#define GPIO179_BUSMON_D32 PIN_CFG(179, ALT_C) - -#define GPIO180_GPIO PIN_CFG(180, GPIO) -#define GPIO180_U2_RTSn PIN_CFG(180, ALT_A) -#define GPIO180_U3_TXD PIN_CFG(180, ALT_B) -#define GPIO180_BUSMON_D33 PIN_CFG(180, ALT_C) - -#define GPIO185_GPIO PIN_CFG(185, GPIO) -#define GPIO185_SPI3_CS2n PIN_CFG(185, ALT_A) -#define GPIO185_MC4_DAT0 PIN_CFG(185, ALT_B) - -#define GPIO186_GPIO PIN_CFG(186, GPIO) -#define GPIO186_SPI3_CS1n PIN_CFG(186, ALT_A) -#define GPIO186_MC4_DAT1 PIN_CFG(186, ALT_B) - -#define GPIO187_GPIO PIN_CFG(187, GPIO) -#define GPIO187_SPI3_CS0n PIN_CFG(187, ALT_A) -#define GPIO187_MC4_DAT2 PIN_CFG(187, ALT_B) - -#define GPIO188_GPIO PIN_CFG(188, GPIO) -#define GPIO188_SPI3_RXD PIN_CFG(188, ALT_A) -#define GPIO188_MC4_DAT3 PIN_CFG(188, ALT_B) - -#define GPIO189_GPIO PIN_CFG(189, GPIO) -#define GPIO189_SPI3_TXD PIN_CFG(189, ALT_A) -#define GPIO189_MC4_CMD PIN_CFG(189, ALT_B) - -#define GPIO190_GPIO PIN_CFG(190, GPIO) -#define GPIO190_SPI3_CLK PIN_CFG(190, ALT_A) -#define GPIO190_MC4_CLK PIN_CFG(190, ALT_B) - -#define GPIO191_GPIO PIN_CFG(191, GPIO) -#define GPIO191_MC1_DAT0 PIN_CFG(191, ALT_A) -#define GPIO191_MC4_DAT4 PIN_CFG(191, ALT_B) -#define GPIO191_STMAPE_DAT0 PIN_CFG(191, ALT_C) - -#define GPIO192_GPIO PIN_CFG(192, GPIO) -#define GPIO192_MC1_DAT1 PIN_CFG(192, ALT_A) -#define GPIO192_MC4_DAT5 PIN_CFG(192, ALT_B) -#define GPIO192_STMAPE_DAT1 PIN_CFG(192, ALT_C) - -#define GPIO193_GPIO PIN_CFG(193, GPIO) -#define GPIO193_MC1_DAT2 PIN_CFG(193, ALT_A) -#define GPIO193_MC4_DAT6 PIN_CFG(193, ALT_B) -#define GPIO193_STMAPE_DAT2 PIN_CFG(193, ALT_C) - -#define GPIO194_GPIO PIN_CFG(194, GPIO) -#define GPIO194_MC1_DAT3 PIN_CFG(194, ALT_A) -#define GPIO194_MC4_DAT7 PIN_CFG(194, ALT_B) -#define GPIO194_STMAPE_DAT3 PIN_CFG(194, ALT_C) - -#define GPIO195_GPIO PIN_CFG(195, GPIO) -#define GPIO195_MC1_CLK PIN_CFG(195, ALT_A) -#define GPIO195_STMAPE_CLK PIN_CFG(195, ALT_B) -#define GPIO195_BUSMON_CLK PIN_CFG(195, ALT_C) - -#define GPIO196_GPIO PIN_CFG(196, GPIO) -#define GPIO196_MC1_CMD PIN_CFG(196, ALT_A) -#define GPIO196_U0_RXD PIN_CFG(196, ALT_B) -#define GPIO196_BUSMON_D38 PIN_CFG(196, ALT_C) - -#define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC1_CMDDIR PIN_CFG(197, ALT_A) -#define GPIO197_BUSMON_D39 PIN_CFG(197, ALT_B) - -#define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC1_FBCLK PIN_CFG(198, ALT_A) - -#define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC1_DAT0DIR PIN_CFG(199, ALT_A) -#define GPIO199_BUSMON_D40 PIN_CFG(199, ALT_B) - -#define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_U1_TXD PIN_CFG(200, ALT_A) -#define GPIO200_ACCU0_RTSn PIN_CFG(200, ALT_B) - -#define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_U1_RXD PIN_CFG(201, ALT_A) -#define GPIO201_ACCU0_CTSn PIN_CFG(201, ALT_B) - -#define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_U1_CTSn PIN_CFG(202, ALT_A) -#define GPIO202_ACCU0_RXD PIN_CFG(202, ALT_B) - -#define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_U1_RTSn PIN_CFG(203, ALT_A) -#define GPIO203_ACCU0_TXD PIN_CFG(203, ALT_B) - -#define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_SPI0_CS2n PIN_CFG(204, ALT_A) -#define GPIO204_ACCGPIO_000 PIN_CFG(204, ALT_B) -#define GPIO204_LCD_VSI1 PIN_CFG(204, ALT_C) - -#define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_SPI0_CS1n PIN_CFG(205, ALT_A) -#define GPIO205_ACCGPIO_001 PIN_CFG(205, ALT_B) -#define GPIO205_LCD_D3 PIN_CFG(205, ALT_C) - -#define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_SPI0_CS0n PIN_CFG(206, ALT_A) -#define GPIO206_ACCGPIO_002 PIN_CFG(206, ALT_B) -#define GPIO206_LCD_D2 PIN_CFG(206, ALT_C) - -#define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_SPI0_RXD PIN_CFG(207, ALT_A) -#define GPIO207_ACCGPIO_003 PIN_CFG(207, ALT_B) -#define GPIO207_LCD_D1 PIN_CFG(207, ALT_C) - -#define GPIO208_GPIO PIN_CFG(208, GPIO) -#define GPIO208_SPI0_TXD PIN_CFG(208, ALT_A) -#define GPIO208_ACCGPIO_004 PIN_CFG(208, ALT_B) -#define GPIO208_LCD_D0 PIN_CFG(208, ALT_C) - -#define GPIO209_GPIO PIN_CFG(209, GPIO) -#define GPIO209_SPI0_CLK PIN_CFG(209, ALT_A) -#define GPIO209_ACCGPIO_005 PIN_CFG(209, ALT_B) -#define GPIO209_LCD_CLK PIN_CFG(209, ALT_C) - -#define GPIO210_GPIO PIN_CFG(210, GPIO) -#define GPIO210_LCD_VSO PIN_CFG(210, ALT_A) -#define GPIO210_PRCMU_PWRCTRL1 PIN_CFG(210, ALT_B) - -#define GPIO211_GPIO PIN_CFG(211, GPIO) -#define GPIO211_LCD_VSI0 PIN_CFG(211, ALT_A) -#define GPIO211_PRCMU_PWRCTRL2 PIN_CFG(211, ALT_B) - -#define GPIO212_GPIO PIN_CFG(212, GPIO) -#define GPIO212_SPI2_CS2n PIN_CFG(212, ALT_A) -#define GPIO212_LCD_HSO PIN_CFG(212, ALT_B) - -#define GPIO213_GPIO PIN_CFG(213, GPIO) -#define GPIO213_SPI2_CS1n PIN_CFG(213, ALT_A) -#define GPIO213_LCD_DE PIN_CFG(213, ALT_B) -#define GPIO213_BUSMON_D16 PIN_CFG(213, ALT_C) - -#define GPIO214_GPIO PIN_CFG(214, GPIO) -#define GPIO214_SPI2_CS0n PIN_CFG(214, ALT_A) -#define GPIO214_LCD_D7 PIN_CFG(214, ALT_B) -#define GPIO214_BUSMON_D17 PIN_CFG(214, ALT_C) - -#define GPIO215_GPIO PIN_CFG(215, GPIO) -#define GPIO215_SPI2_RXD PIN_CFG(215, ALT_A) -#define GPIO215_LCD_D6 PIN_CFG(215, ALT_B) -#define GPIO215_BUSMON_D18 PIN_CFG(215, ALT_C) - -#define GPIO216_GPIO PIN_CFG(216, GPIO) -#define GPIO216_SPI2_CLK PIN_CFG(216, ALT_A) -#define GPIO216_LCD_D5 PIN_CFG(216, ALT_B) - -#define GPIO217_GPIO PIN_CFG(217, GPIO) -#define GPIO217_SPI2_TXD PIN_CFG(217, ALT_A) -#define GPIO217_LCD_D4 PIN_CFG(217, ALT_B) -#define GPIO217_BUSMON_D19 PIN_CFG(217, ALT_C) - -#define GPIO218_GPIO PIN_CFG(218, GPIO) -#define GPIO218_I2C2_SCL PIN_CFG(218, ALT_A) -#define GPIO218_LCD_VSO PIN_CFG(218, ALT_B) - -#define GPIO219_GPIO PIN_CFG(219, GPIO) -#define GPIO219_I2C2_SDA PIN_CFG(219, ALT_A) -#define GPIO219_LCD_D3 PIN_CFG(219, ALT_B) - -#define GPIO220_GPIO PIN_CFG(220, GPIO) -#define GPIO220_MSP2_TCK PIN_CFG(220, ALT_A) -#define GPIO220_LCD_D2 PIN_CFG(220, ALT_B) - -#define GPIO221_GPIO PIN_CFG(221, GPIO) -#define GPIO221_MSP2_TFS PIN_CFG(221, ALT_A) -#define GPIO221_LCD_D1 PIN_CFG(221, ALT_B) - -#define GPIO222_GPIO PIN_CFG(222, GPIO) -#define GPIO222_MSP2_TXD PIN_CFG(222, ALT_A) -#define GPIO222_LCD_D0 PIN_CFG(222, ALT_B) - -#define GPIO223_GPIO PIN_CFG(223, GPIO) -#define GPIO223_MSP2_RXD PIN_CFG(223, ALT_A) -#define GPIO223_LCD_CLK PIN_CFG(223, ALT_B) - -#define GPIO224_GPIO PIN_CFG(224, GPIO) -#define GPIO224_PRCMU_PWRCTRL0 PIN_CFG(224, ALT_A) -#define GPIO224_LCD_VSI1 PIN_CFG(224, ALT_B) - -#define GPIO225_GPIO PIN_CFG(225, GPIO) -#define GPIO225_PRCMU_PWRCTRL1 PIN_CFG(225, ALT_A) -#define GPIO225_IRDA_RXD PIN_CFG(225, ALT_B) - -#define GPIO226_GPIO PIN_CFG(226, GPIO) -#define GPIO226_PRCMU_PWRCTRL2 PIN_CFG(226, ALT_A) -#define GPIO226_IRRC_DAT PIN_CFG(226, ALT_B) - -#define GPIO227_GPIO PIN_CFG(227, GPIO) -#define GPIO227_IRRC_DAT PIN_CFG(227, ALT_A) -#define GPIO227_IRDA_TXD PIN_CFG(227, ALT_B) - -#endif diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h index 8b1d1a7a679e..062c7acf4576 100644 --- a/arch/arm/mach-ux500/pins-db8500.h +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -35,40 +35,40 @@ #define GPIO4_GPIO PIN_CFG(4, GPIO) #define GPIO4_U1_RXD PIN_CFG(4, ALT_A) -#define GPIO4_I2C4_SCL PIN_CFG_INPUT(4, ALT_B, PULLUP) +#define GPIO4_I2C4_SCL PIN_CFG(4, ALT_B) #define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) #define GPIO5_GPIO PIN_CFG(5, GPIO) #define GPIO5_U1_TXD PIN_CFG(5, ALT_A) -#define GPIO5_I2C4_SDA PIN_CFG_INPUT(5, ALT_B, PULLUP) +#define GPIO5_I2C4_SDA PIN_CFG(5, ALT_B) #define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) #define GPIO6_GPIO PIN_CFG(6, GPIO) #define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) -#define GPIO6_I2C1_SCL PIN_CFG_INPUT(6, ALT_B, PULLUP) +#define GPIO6_I2C1_SCL PIN_CFG(6, ALT_B) #define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) #define GPIO7_GPIO PIN_CFG(7, GPIO) #define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) -#define GPIO7_I2C1_SDA PIN_CFG_INPUT(7, ALT_B, PULLUP) +#define GPIO7_I2C1_SDA PIN_CFG(7, ALT_B) #define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) #define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_IPI2C_SDA PIN_CFG_INPUT(8, ALT_A, PULLUP) -#define GPIO8_I2C2_SDA PIN_CFG_INPUT(8, ALT_B, PULLUP) +#define GPIO8_IPI2C_SDA PIN_CFG(8, ALT_A) +#define GPIO8_I2C2_SDA PIN_CFG(8, ALT_B) #define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_IPI2C_SCL PIN_CFG_INPUT(9, ALT_A, PULLUP) -#define GPIO9_I2C2_SCL PIN_CFG_INPUT(9, ALT_B, PULLUP) +#define GPIO9_IPI2C_SCL PIN_CFG(9, ALT_A) +#define GPIO9_I2C2_SCL PIN_CFG(9, ALT_B) #define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_IPI2C_SDA PIN_CFG_INPUT(10, ALT_A, PULLUP) -#define GPIO10_I2C2_SDA PIN_CFG_INPUT(10, ALT_B, PULLUP) +#define GPIO10_IPI2C_SDA PIN_CFG(10, ALT_A) +#define GPIO10_I2C2_SDA PIN_CFG(10, ALT_B) #define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) #define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_IPI2C_SCL PIN_CFG_INPUT(11, ALT_A, PULLUP) -#define GPIO11_I2C2_SCL PIN_CFG_INPUT(11, ALT_B, PULLUP) +#define GPIO11_IPI2C_SCL PIN_CFG(11, ALT_A) +#define GPIO11_I2C2_SCL PIN_CFG(11, ALT_B) #define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) #define GPIO12_GPIO PIN_CFG(12, GPIO) @@ -87,12 +87,12 @@ #define GPIO16_GPIO PIN_CFG(16, GPIO) #define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) -#define GPIO16_I2C1_SCL PIN_CFG_INPUT(16, ALT_B, PULLUP) +#define GPIO16_I2C1_SCL PIN_CFG(16, ALT_B) #define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) #define GPIO17_GPIO PIN_CFG(17, GPIO) #define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) -#define GPIO17_I2C1_SDA PIN_CFG_INPUT(17, ALT_B, PULLUP) +#define GPIO17_I2C1_SDA PIN_CFG(17, ALT_B) #define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) #define GPIO18_GPIO PIN_CFG(18, GPIO) @@ -434,10 +434,10 @@ #define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) #define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_I2C0_SCL PIN_CFG_INPUT(147, ALT_A, PULLUP) +#define GPIO147_I2C0_SCL PIN_CFG(147, ALT_A) #define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_I2C0_SDA PIN_CFG_INPUT(148, ALT_A, PULLUP) +#define GPIO148_I2C0_SDA PIN_CFG(148, ALT_A) #define GPIO149_GPIO PIN_CFG(149, GPIO) #define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) @@ -459,82 +459,82 @@ #define GPIO152_KP_O9 PIN_CFG(152, ALT_C) #define GPIO153_GPIO PIN_CFG(153, GPIO) -#define GPIO153_KP_I7 PIN_CFG_INPUT(153, ALT_A, PULLDOWN) +#define GPIO153_KP_I7 PIN_CFG(153, ALT_A) #define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) #define GPIO153_U2_RXD PIN_CFG(153, ALT_C) #define GPIO154_GPIO PIN_CFG(154, GPIO) -#define GPIO154_KP_I6 PIN_CFG_INPUT(154, ALT_A, PULLDOWN) +#define GPIO154_KP_I6 PIN_CFG(154, ALT_A) #define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) #define GPIO154_U2_TXD PIN_CFG(154, ALT_C) #define GPIO155_GPIO PIN_CFG(155, GPIO) -#define GPIO155_KP_I5 PIN_CFG_INPUT(155, ALT_A, PULLDOWN) +#define GPIO155_KP_I5 PIN_CFG(155, ALT_A) #define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) #define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) #define GPIO156_GPIO PIN_CFG(156, GPIO) -#define GPIO156_KP_I4 PIN_CFG_INPUT(156, ALT_A, PULLDOWN) +#define GPIO156_KP_I4 PIN_CFG(156, ALT_A) #define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) #define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) #define GPIO157_GPIO PIN_CFG(157, GPIO) -#define GPIO157_KP_O7 PIN_CFG_INPUT(157, ALT_A, PULLUP) +#define GPIO157_KP_O7 PIN_CFG(157, ALT_A) #define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) #define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) #define GPIO158_GPIO PIN_CFG(158, GPIO) -#define GPIO158_KP_O6 PIN_CFG_INPUT(158, ALT_A, PULLUP) +#define GPIO158_KP_O6 PIN_CFG(158, ALT_A) #define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) #define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) #define GPIO159_GPIO PIN_CFG(159, GPIO) -#define GPIO159_KP_O5 PIN_CFG_INPUT(159, ALT_A, PULLUP) +#define GPIO159_KP_O5 PIN_CFG(159, ALT_A) #define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) #define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) #define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_KP_O4 PIN_CFG_INPUT(160, ALT_A, PULLUP) +#define GPIO160_KP_O4 PIN_CFG(160, ALT_A) #define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) #define GPIO160_NONE PIN_CFG(160, ALT_C) #define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_KP_I3 PIN_CFG_INPUT(161, ALT_A, PULLDOWN) +#define GPIO161_KP_I3 PIN_CFG(161, ALT_A) #define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) #define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) #define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_KP_I2 PIN_CFG_INPUT(162, ALT_A, PULLDOWN) +#define GPIO162_KP_I2 PIN_CFG(162, ALT_A) #define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) #define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) #define GPIO163_GPIO PIN_CFG(163, GPIO) -#define GPIO163_KP_I1 PIN_CFG_INPUT(163, ALT_A, PULLDOWN) +#define GPIO163_KP_I1 PIN_CFG(163, ALT_A) #define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) #define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) #define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_KP_I0 PIN_CFG_INPUT(164, ALT_A, PULLUP) +#define GPIO164_KP_I0 PIN_CFG(164, ALT_A) #define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) #define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) #define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_KP_O3 PIN_CFG_INPUT(165, ALT_A, PULLUP) +#define GPIO165_KP_O3 PIN_CFG(165, ALT_A) #define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) #define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) #define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_KP_O2 PIN_CFG_INPUT(166, ALT_A, PULLUP) +#define GPIO166_KP_O2 PIN_CFG(166, ALT_A) #define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) #define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) #define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_KP_O1 PIN_CFG_INPUT(167, ALT_A, PULLUP) +#define GPIO167_KP_O1 PIN_CFG(167, ALT_A) #define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) #define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) #define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_KP_O0 PIN_CFG_INPUT(168, ALT_A, PULLUP) +#define GPIO168_KP_O0 PIN_CFG(168, ALT_A) #define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) #define GPIO168_NONE PIN_CFG(168, ALT_C) @@ -637,7 +637,7 @@ #define GPIO216_GPIO PIN_CFG(216, GPIO) #define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) #define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) -#define GPIO216_I2C3_SDA PIN_CFG_INPUT(216, ALT_C, PULLUP) +#define GPIO216_I2C3_SDA PIN_CFG(216, ALT_C) #define GPIO216_SPI2_FRM PIN_CFG(216, ALT_C) #define GPIO217_GPIO PIN_CFG(217, GPIO) @@ -649,7 +649,7 @@ #define GPIO218_GPIO PIN_CFG(218, GPIO) #define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) #define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) -#define GPIO218_I2C3_SCL PIN_CFG_INPUT(218, ALT_C, PULLUP) +#define GPIO218_I2C3_SCL PIN_CFG(218, ALT_C) #define GPIO218_SPI2_RXD PIN_CFG(218, ALT_C) #define GPIO219_GPIO PIN_CFG(219, GPIO) @@ -698,12 +698,12 @@ #define GPIO229_GPIO PIN_CFG(229, GPIO) #define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) #define GPIO229_PWL PIN_CFG(229, ALT_B) -#define GPIO229_I2C3_SDA PIN_CFG_INPUT(229, ALT_C, PULLUP) +#define GPIO229_I2C3_SDA PIN_CFG(229, ALT_C) #define GPIO230_GPIO PIN_CFG(230, GPIO) #define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) #define GPIO230_PWL PIN_CFG(230, ALT_B) -#define GPIO230_I2C3_SCL PIN_CFG_INPUT(230, ALT_C, PULLUP) +#define GPIO230_I2C3_SCL PIN_CFG(230, ALT_C) #define GPIO256_GPIO PIN_CFG(256, GPIO) #define GPIO256_USB_NXT PIN_CFG(256, ALT_A) diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index eff5842f6232..da1d5ad5bd45 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -48,9 +48,7 @@ static void write_pen_release(int val) static void __iomem *scu_base_addr(void) { - if (cpu_is_u5500()) - return __io_address(U5500_SCU_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500_family()) return __io_address(U8500_SCU_BASE); else ux500_unknown_soc(); @@ -120,9 +118,7 @@ static void __init wakeup_secondary(void) { void __iomem *backupram; - if (cpu_is_u5500()) - backupram = __io_address(U5500_BACKUPRAM0_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500_family()) backupram = __io_address(U8500_BACKUPRAM0_BASE); else ux500_unknown_soc(); diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h deleted file mode 100644 index cb2110c32858..000000000000 --- a/arch/arm/mach-ux500/ste-dma40-db5500.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * - * DB5500-SoC-specific configuration for DMA40 - */ - -#ifndef STE_DMA40_DB5500_H -#define STE_DMA40_DB5500_H - -#define DB5500_DMA_NR_DEV 64 - -enum dma_src_dev_type { - DB5500_DMA_DEV0_SPI0_RX = 0, - DB5500_DMA_DEV1_SPI1_RX = 1, - DB5500_DMA_DEV2_SPI2_RX = 2, - DB5500_DMA_DEV3_SPI3_RX = 3, - DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4, - DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5, - DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6, - DB5500_DMA_DEV7_IRDA_RFS = 7, - DB5500_DMA_DEV8_IRDA_FIFO_RX = 8, - DB5500_DMA_DEV9_MSP0_RX = 9, - DB5500_DMA_DEV10_MSP1_RX = 10, - DB5500_DMA_DEV11_MSP2_RX = 11, - DB5500_DMA_DEV12_UART0_RX = 12, - DB5500_DMA_DEV13_UART1_RX = 13, - DB5500_DMA_DEV14_UART2_RX = 14, - DB5500_DMA_DEV15_UART3_RX = 15, - DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16, - DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17, - DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18, - DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19, - DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20, - DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21, - DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22, - DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23, - DB5500_DMA_DEV24_SDMMC0_RX = 24, - DB5500_DMA_DEV25_SDMMC1_RX = 25, - DB5500_DMA_DEV26_SDMMC2_RX = 26, - DB5500_DMA_DEV27_SDMMC3_RX = 27, - DB5500_DMA_DEV28_SDMMC4_RX = 28, - /* 29 - 32 not used */ - DB5500_DMA_DEV33_SDMMC0_RX = 33, - DB5500_DMA_DEV34_SDMMC1_RX = 34, - DB5500_DMA_DEV35_SDMMC2_RX = 35, - DB5500_DMA_DEV36_SDMMC3_RX = 36, - DB5500_DMA_DEV37_SDMMC4_RX = 37, - DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38, - DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39, - DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40, - DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41, - DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42, - DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43, - DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44, - DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45, - /* 46 not used */ - DB5500_DMA_DEV47_MCDE_RX = 47, - DB5500_DMA_DEV48_CRYPTO1_RX = 48, - /* 49, 50 not used */ - DB5500_DMA_DEV49_I2C1_RX = 51, - DB5500_DMA_DEV50_I2C3_RX = 52, - DB5500_DMA_DEV51_I2C2_RX = 53, - /* 54 - 60 not used */ - DB5500_DMA_DEV61_CRYPTO0_RX = 61, - /* 62, 63 not used */ -}; - -enum dma_dest_dev_type { - DB5500_DMA_DEV0_SPI0_TX = 0, - DB5500_DMA_DEV1_SPI1_TX = 1, - DB5500_DMA_DEV2_SPI2_TX = 2, - DB5500_DMA_DEV3_SPI3_TX = 3, - DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4, - DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5, - DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6, - DB5500_DMA_DEV7_IRRC_TX = 7, - DB5500_DMA_DEV8_IRDA_FIFO_TX = 8, - DB5500_DMA_DEV9_MSP0_TX = 9, - DB5500_DMA_DEV10_MSP1_TX = 10, - DB5500_DMA_DEV11_MSP2_TX = 11, - DB5500_DMA_DEV12_UART0_TX = 12, - DB5500_DMA_DEV13_UART1_TX = 13, - DB5500_DMA_DEV14_UART2_TX = 14, - DB5500_DMA_DEV15_UART3_TX = 15, - DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16, - DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17, - DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18, - DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19, - DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20, - DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21, - DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22, - DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23, - DB5500_DMA_DEV24_SDMMC0_TX = 24, - DB5500_DMA_DEV25_SDMMC1_TX = 25, - DB5500_DMA_DEV26_SDMMC2_TX = 26, - DB5500_DMA_DEV27_SDMMC3_TX = 27, - DB5500_DMA_DEV28_SDMMC4_TX = 28, - /* 29 - 31 not used */ - DB5500_DMA_DEV32_FSMC_TX = 32, - DB5500_DMA_DEV33_SDMMC0_TX = 33, - DB5500_DMA_DEV34_SDMMC1_TX = 34, - DB5500_DMA_DEV35_SDMMC2_TX = 35, - DB5500_DMA_DEV36_SDMMC3_TX = 36, - DB5500_DMA_DEV37_SDMMC4_TX = 37, - DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38, - DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39, - DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40, - DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41, - DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42, - DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43, - DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44, - DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45, - /* 46 not used */ - DB5500_DMA_DEV47_STM_TX = 47, - DB5500_DMA_DEV48_CRYPTO1_TX = 48, - DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49, - DB5500_DMA_DEV50_HASH1_TX = 50, - DB5500_DMA_DEV51_I2C1_TX = 51, - DB5500_DMA_DEV52_I2C3_TX = 52, - DB5500_DMA_DEV53_I2C2_TX = 53, - /* 54, 55 not used */ - DB5500_DMA_MEMCPY_TX_1 = 56, - DB5500_DMA_MEMCPY_TX_2 = 57, - DB5500_DMA_MEMCPY_TX_3 = 58, - DB5500_DMA_MEMCPY_TX_4 = 59, - DB5500_DMA_MEMCPY_TX_5 = 60, - DB5500_DMA_DEV61_CRYPTO0_TX = 61, - DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62, - DB5500_DMA_DEV63_HASH0_TX = 63, -}; - -#endif diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index d37df98b5c32..66e7f00884ab 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -8,6 +8,7 @@ #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> #include <linux/of.h> +#include <linux/of_address.h> #include <asm/smp_twd.h> @@ -18,8 +19,6 @@ #include <mach/irqs.h> #ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer, - U5500_TWD_BASE, IRQ_LOCALTIMER); static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, U8500_TWD_BASE, IRQ_LOCALTIMER); @@ -28,8 +27,8 @@ static void __init ux500_twd_init(void) struct twd_local_timer *twd_local_timer; int err; - twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer : - &u8500_twd_local_timer; + /* Use this to switch local timer base if changed in new ASICs */ + twd_local_timer = &u8500_twd_local_timer; if (of_have_populated_dt()) twd_local_timer_of_register(); @@ -43,21 +42,43 @@ static void __init ux500_twd_init(void) #define ux500_twd_init() do { } while(0) #endif +const static struct of_device_id prcmu_timer_of_match[] __initconst = { + { .compatible = "stericsson,db8500-prcmu-timer-4", }, + { }, +}; + static void __init ux500_timer_init(void) { void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; + void __iomem *tmp_base; + struct device_node *np; - if (cpu_is_u5500()) { - mtu_timer_base = __io_address(U5500_MTU0_BASE); - prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE); - } else if (cpu_is_u8500()) { + if (cpu_is_u8500_family()) { mtu_timer_base = __io_address(U8500_MTU0_BASE); prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); } else { ux500_unknown_soc(); } + /* TODO: Once MTU has been DT:ed place code above into else. */ + if (of_have_populated_dt()) { +#ifdef CONFIG_OF + np = of_find_matching_node(NULL, prcmu_timer_of_match); + if (!np) +#endif + goto dt_fail; + + tmp_base = of_iomap(np, 0); + if (!tmp_base) + goto dt_fail; + + prcmu_timer_base = tmp_base; + } + +dt_fail: + /* Doing it the old fashioned way. */ + /* * Here we register the timerblocks active in the system. * Localtimers (twd) is started when both cpu is up and running. @@ -70,7 +91,7 @@ static void __init ux500_timer_init(void) * depending on delay which is not yet calibrated. RTC-RTT is in the * always-on powerdomain and is used as clockevent instead of twd when * sleeping. - * The PRCMU timer 4(3 for DB5500) register a clocksource and + * The PRCMU timer 4 register a clocksource and * sched_clock with higher rating then MTU since is always-on. * */ |
