summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ux500')
-rw-r--r--arch/arm/mach-ux500/board-mop500.c88
-rw-r--r--arch/arm/mach-ux500/clock.c5
-rw-r--r--arch/arm/mach-ux500/cpu-u8500.c1
-rw-r--r--arch/arm/mach-ux500/include/mach/debug-macro.S11
-rw-r--r--arch/arm/mach-ux500/include/mach/hardware.h8
-rw-r--r--arch/arm/mach-ux500/include/mach/vmalloc.h2
6 files changed, 101 insertions, 14 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index aa5afbcc90f9..803aec1d6728 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -22,6 +22,7 @@
#include <asm/mach/arch.h>
#include <plat/mtu.h>
+#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/setup.h>
@@ -108,11 +109,96 @@ static struct amba_device pl022_device = {
.periphid = SSP_PER_ID,
};
+static struct amba_device pl031_device = {
+ .dev = {
+ .init_name = "pl031",
+ },
+ .res = {
+ .start = U8500_RTC_BASE,
+ .end = U8500_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_RTC_RTT, NO_IRQ},
+};
+
+#define U8500_I2C_RESOURCES(id, size) \
+static struct resource u8500_i2c_resources_##id[] = { \
+ [0] = { \
+ .start = U8500_I2C##id##_BASE, \
+ .end = U8500_I2C##id##_BASE + size - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ [1] = { \
+ .start = IRQ_I2C##id, \
+ .end = IRQ_I2C##id, \
+ .flags = IORESOURCE_IRQ \
+ } \
+}
+
+U8500_I2C_RESOURCES(0, SZ_4K);
+U8500_I2C_RESOURCES(1, SZ_4K);
+U8500_I2C_RESOURCES(2, SZ_4K);
+U8500_I2C_RESOURCES(3, SZ_4K);
+
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+static struct nmk_i2c_controller u8500_i2c_##id = { \
+ /* \
+ * slave data setup time, which is \
+ * 250 ns,100ns,10ns which is 14,6,2 \
+ * respectively for a 48 Mhz \
+ * i2c clock \
+ */ \
+ .slsu = _slsu, \
+ /* Tx FIFO threshold */ \
+ .tft = _tft, \
+ /* Rx FIFO threshold */ \
+ .rft = _rft, \
+ /* std. mode operation */ \
+ .clk_freq = clk, \
+ .sm = _sm, \
+}
+
+/*
+ * The board uses 4 i2c controllers, initialize all of
+ * them with slave data setup time of 250 ns,
+ * Tx & Rx FIFO threshold values as 1 and standard
+ * mode of operation
+ */
+U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+
+#define U8500_I2C_PDEVICE(cid) \
+static struct platform_device i2c_controller##cid = { \
+ .name = "nmk-i2c", \
+ .id = cid, \
+ .num_resources = 2, \
+ .resource = u8500_i2c_resources_##cid, \
+ .dev = { \
+ .platform_data = &u8500_i2c_##cid \
+ } \
+}
+
+U8500_I2C_PDEVICE(0);
+U8500_I2C_PDEVICE(1);
+U8500_I2C_PDEVICE(2);
+U8500_I2C_PDEVICE(3);
+
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
&uart1_device,
&uart2_device,
&pl022_device,
+ &pl031_device,
+};
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+ &i2c_controller0,
+ &i2c_controller1,
+ &i2c_controller2,
+ &i2c_controller3,
};
static void __init u8500_timer_init(void)
@@ -139,6 +225,8 @@ static void __init u8500_init_machine(void)
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
spi_register_board_info(u8500_spi_devices,
ARRAY_SIZE(u8500_spi_devices));
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 20b6ebb6783a..8359a73d0041 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -85,11 +85,8 @@ static struct clk_lookup lookups[] = {
static int __init clk_init(void)
{
- int i;
-
/* register the clock lookups */
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
return 0;
}
arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
index 5f05e5850f71..397bc1f9ed94 100644
--- a/arch/arm/mach-ux500/cpu-u8500.c
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -33,6 +33,7 @@ static struct platform_device *platform_devs[] __initdata = {
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8f21b6a95dce..09cbfda8aee5 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -8,12 +8,13 @@
* published by the Free Software Foundation.
*
*/
- .macro addruart,rx
+#include <mach/hardware.h>
+
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @MMU enabled?
- moveq \rx, #0x80000000 @MMU off, Physical address
- movne \rx, #0xF0000000 @MMU on, Virtual address
- orr \rx, \rx, #0x7000
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =U8500_UART2_BASE @ no, physical address
+ ldrne \rx, =IO_ADDRESS(U8500_UART2_BASE) @ yes, virtual address
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 6da650202dc7..04ea836969b3 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -68,12 +68,12 @@
#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE (U8500_PER7_BASE + 0xf000)
+#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
/* per5 base addressess */
#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000)
-#define U8500_CLKRST5_BASE (U8500_PER7_BASE + 0x1f000)
+#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
/* per4 base addressess */
#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000)
@@ -95,7 +95,7 @@
#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000)
-#define U8500_CLKRST3_BASE (U8500_PER7_BASE + 0xf000)
+#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
/* per2 base addressess */
#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
@@ -123,7 +123,7 @@
#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000)
#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000)
-#define U8500_CLKRST1_BASE (U8500_PER2_BASE + 0xf000)
+#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
/* ST-Ericsson modified pl022 id */
#define SSP_PER_ID 0x01080022
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
index 86cdbbce1842..a4945cb41172 100644
--- a/arch/arm/mach-ux500/include/mach/vmalloc.h
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -15,4 +15,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xf0000000
+#define VMALLOC_END 0xf0000000UL
OpenPOWER on IntegriCloud