19 files changed, 276 insertions, 69 deletions

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d0f2546706ca..6a113a9bb87a 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -50,6 +50,14 @@ config TEGRA_PCI
 	depends on ARCH_TEGRA_2x_SOC
 	select PCI
 
+config TEGRA_AHB
+	bool "Enable AHB driver for NVIDIA Tegra SoCs"
+	default y
+	help
+	  Adds AHB configuration functionality for NVIDIA Tegra SoCs,
+	  which controls AHB bus master arbitration and some
+	  perfomance parameters(priority, prefech size).
+
 comment "Tegra board type"
 
 config MACH_HARMONY
@@ -111,7 +119,7 @@ config MACH_VENTANA
          Support for the nVidia Ventana development platform
 
 choice
-        prompt "Low-level debug console UART"
+        prompt "Default low-level debug console UART"
         default TEGRA_DEBUG_UART_NONE
 
 config TEGRA_DEBUG_UART_NONE
@@ -134,6 +142,33 @@ config TEGRA_DEBUG_UARTE
 
 endchoice
 
+choice
+	prompt "Automatic low-level debug console UART"
+	default TEGRA_DEBUG_UART_AUTO_NONE
+
+config TEGRA_DEBUG_UART_AUTO_NONE
+	bool "None"
+
+config TEGRA_DEBUG_UART_AUTO_ODMDATA
+	bool "Via ODMDATA"
+	help
+	  Automatically determines which UART to use for low-level debug based
+	  on the ODMDATA value. This value is part of the BCT, and is written
+	  to the boot memory device using nvflash, or other flashing tool.
+	  When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
+	  0/1/2/3/4 are UART A/B/C/D/E.
+
+config TEGRA_DEBUG_UART_AUTO_SCRATCH
+	bool "Via UART scratch register"
+	help
+	  Automatically determines which UART to use for low-level debug based
+	  on the UART scratch register value. Some bootloaders put ASCII 'D'
+	  in this register when they initialize their own console UART output.
+	  Using this option allows the kernel to automatically pick the same
+	  UART.
+
+endchoice
+
 config TEGRA_SYSTEM_DMA
 	bool "Enable system DMA driver for NVIDIA Tegra SoCs"
 	default y
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index fac3eb1af17e..eb7249db50a5 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -110,6 +110,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
 	.handle_irq	= gic_handle_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra_dt_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 	.dt_compat	= tegra20_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 5f7c03e972f3..4f76fa7a5da3 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -51,12 +51,22 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL),
 	{}
 };
 
 static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "uarta",	"pll_p",	408000000,	true },
+	{ "pll_a",	"pll_p_out1",	564480000,	true },
+	{ "pll_a_out0",	"pll_a",	11289600,	true },
+	{ "extern1",	"pll_a_out0",	0,		true },
+	{ "clk_out_1",	"extern1",	0,		true },
+	{ "i2s0",	"pll_a_out0",	11289600,	false},
+	{ "i2s1",	"pll_a_out0",	11289600,	false},
+	{ "i2s2",	"pll_a_out0",	11289600,	false},
+	{ "i2s3",	"pll_a_out0",	11289600,	false},
+	{ "i2s4",	"pll_a_out0",	11289600,	false},
 	{ NULL,		NULL,		0,		0},
 };
 
@@ -80,6 +90,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
 	.handle_irq	= gic_handle_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra30_dt_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 	.dt_compat	= tegra30_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index b906b3b6077b..e65e837f4013 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -192,5 +192,6 @@ MACHINE_START(HARMONY, "harmony")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_harmony_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index d0735c70d688..bbc1907e98a6 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -162,6 +162,8 @@ static void paz00_i2c_init(void)
 
 static void paz00_usb_init(void)
 {
+	tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST;
+
 	platform_device_register(&tegra_ehci2_device);
 	platform_device_register(&tegra_ehci3_device);
 }
@@ -179,7 +181,6 @@ static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
 	{ "uarta",	"pll_p",	216000000,	true },
 	{ "uartc",	"pll_p",	216000000,	true },
 
-	{ "pll_p_out4",	"pll_p",	24000000,	true },
 	{ "usbd",	"clk_m",	12000000,	false },
 	{ "usb2",	"clk_m",	12000000,	false },
 	{ "usb3",	"clk_m",	12000000,	false },
@@ -224,5 +225,6 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_paz00_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 79064c7a7907..71e9f3fc7fba 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -277,6 +277,7 @@ MACHINE_START(SEABOARD, "seaboard")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_seaboard_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
 
@@ -288,6 +289,7 @@ MACHINE_START(KAEN, "kaen")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_kaen_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
 
@@ -299,5 +301,6 @@ MACHINE_START(WARIO, "wario")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_wario_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index bc59b379c6fe..776aa9564d5d 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -118,6 +118,8 @@ static void trimslice_usb_init(void)
 	pdata = tegra_ehci1_device.dev.platform_data;
 	pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE;
 
+	tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0;
+
 	platform_device_register(&tegra_ehci3_device);
 	platform_device_register(&tegra_ehci2_device);
 	platform_device_register(&tegra_ehci1_device);
@@ -176,5 +178,6 @@ MACHINE_START(TRIMSLICE, "trimslice")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_trimslice_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 75d1543d77c0..65014968fc6c 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -32,5 +32,19 @@ void __init tegra_init_irq(void);
 void __init tegra_dt_init_irq(void);
 int __init tegra_pcie_init(bool init_port0, bool init_port1);
 
+void tegra_init_late(void);
+
+#ifdef CONFIG_DEBUG_FS
+int tegra_clk_debugfs_init(void);
+#else
+static inline int tegra_clk_debugfs_init(void) { return 0; }
+#endif
+
+#if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS)
+int __init tegra_powergate_debugfs_init(void);
+#else
+static inline int tegra_powergate_debugfs_init(void) { return 0; }
+#endif
+
 extern struct sys_timer tegra_timer;
 #endif
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 8dad8d18cb49..58f981c0819c 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -642,7 +642,7 @@ static int clk_debugfs_register(struct clk *c)
 	return 0;
 }
 
-static int __init clk_debugfs_init(void)
+int __init tegra_clk_debugfs_init(void)
 {
 	struct clk *c;
 	struct dentry *d;
@@ -669,5 +669,4 @@ err_out:
 	return err;
 }
 
-late_initcall(clk_debugfs_init);
 #endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 22df10fb9972..204a5c8b0b57 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -82,10 +82,12 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
 	{ "pll_p_out1",	"pll_p",	28800000,	true },
 	{ "pll_p_out2",	"pll_p",	48000000,	true },
 	{ "pll_p_out3",	"pll_p",	72000000,	true },
-	{ "pll_p_out4",	"pll_p",	108000000,	true },
-	{ "sclk",	"pll_p_out4",	108000000,	true },
-	{ "hclk",	"sclk",		108000000,	true },
-	{ "pclk",	"hclk",		54000000,	true },
+	{ "pll_p_out4",	"pll_p",	24000000,	true },
+	{ "pll_c",	"clk_m",	600000000,	true },
+	{ "pll_c_out1",	"pll_c",	120000000,	true },
+	{ "sclk",	"pll_c_out1",	120000000,	true },
+	{ "hclk",	"sclk",		120000000,	true },
+	{ "pclk",	"hclk",		60000000,	true },
 	{ "csite",	NULL,		0,		true },
 	{ "emc",	NULL,		0,		true },
 	{ "cpu",	NULL,		0,		true },
@@ -93,6 +95,17 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = {
+	/* name		parent		rate		enabled */
+	{ "clk_m",	NULL,		0,		true },
+	{ "pll_p",	"clk_m",	408000000,	true },
+	{ "pll_p_out1",	"pll_p",	9600000,	true },
+	{ NULL,		NULL,		0,		0},
+};
+#endif
+
+
 static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
 {
 #ifdef CONFIG_CACHE_L2X0
@@ -127,8 +140,15 @@ void __init tegra30_init_early(void)
 {
 	tegra_init_fuse();
 	tegra30_init_clocks();
+	tegra_clk_init_from_table(tegra30_clk_init_table);
 	tegra_init_cache(0x441, 0x551);
 	tegra_pmc_init();
 	tegra_powergate_init();
 }
 #endif
+
+void __init tegra_init_late(void)
+{
+	tegra_clk_debugfs_init();
+	tegra_powergate_debugfs_init();
+}
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 2d8dfa2faf8f..c70e65ffa36b 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -439,9 +439,8 @@ static struct resource tegra_usb3_resources[] = {
 	},
 };
 
-static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
-	/* All existing boards use GPIO PV0 for phy reset */
-	.reset_gpio = TEGRA_GPIO_PV0,
+struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+	.reset_gpio = -1,
 	.clk = "cdev2",
 };
 
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 138c642e59f4..4f5052726495 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -22,6 +22,10 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/tegra_usb.h>
 
+#include <mach/usb_phy.h>
+
+extern struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config;
+
 extern struct tegra_ehci_platform_data tegra_ehci1_pdata;
 extern struct tegra_ehci_platform_data tegra_ehci2_pdata;
 extern struct tegra_ehci_platform_data tegra_ehci3_pdata;
diff --git a/arch/arm/mach-tegra/include/mach/tegra-ahb.h b/arch/arm/mach-tegra/include/mach/tegra-ahb.h
new file mode 100644
index 000000000000..e0f8c84b1d8c
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/tegra-ahb.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __MACH_TEGRA_AHB_H__
+#define __MACH_TEGRA_AHB_H__
+
+extern int tegra_ahb_enable_smmu(struct device_node *ahb);
+
+#endif	/* __MACH_TEGRA_AHB_H__ */
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 5a440f315e57..937c4c50219e 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -63,52 +63,86 @@ static inline void save_uart_address(void)
 		buf[0] = 0;
 }
 
-/*
- * Setup before decompression.  This is where we do UART selection for
- * earlyprintk and init the uart_base register.
- */
-static inline void arch_decomp_setup(void)
+static const struct {
+	u32 base;
+	u32 reset_reg;
+	u32 clock_reg;
+	u32 bit;
+} uarts[] = {
+	{
+		TEGRA_UARTA_BASE,
+		TEGRA_CLK_RESET_BASE + 0x04,
+		TEGRA_CLK_RESET_BASE + 0x10,
+		6,
+	},
+	{
+		TEGRA_UARTB_BASE,
+		TEGRA_CLK_RESET_BASE + 0x04,
+		TEGRA_CLK_RESET_BASE + 0x10,
+		7,
+	},
+	{
+		TEGRA_UARTC_BASE,
+		TEGRA_CLK_RESET_BASE + 0x08,
+		TEGRA_CLK_RESET_BASE + 0x14,
+		23,
+	},
+	{
+		TEGRA_UARTD_BASE,
+		TEGRA_CLK_RESET_BASE + 0x0c,
+		TEGRA_CLK_RESET_BASE + 0x18,
+		1,
+	},
+	{
+		TEGRA_UARTE_BASE,
+		TEGRA_CLK_RESET_BASE + 0x0c,
+		TEGRA_CLK_RESET_BASE + 0x18,
+		2,
+	},
+};
+
+static inline bool uart_clocked(int i)
+{
+	if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
+		return false;
+
+	if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+		return false;
+
+	return true;
+}
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
+int auto_odmdata(void)
+{
+	volatile u32 *pmc = (volatile u32 *)TEGRA_PMC_BASE;
+	u32 odmdata = pmc[0xa0 / 4];
+
+	/*
+	 * Bits 19:18 are the console type: 0=default, 1=none, 2==DCC, 3==UART
+	 * Some boards apparently swap the last two values, but we don't have
+	 * any way of catering for that here, so we just accept either. If this
+	 * doesn't make sense for your board, just don't enable this feature.
+	 *
+	 * Bits 17:15 indicate the UART to use, 0/1/2/3/4 are UART A/B/C/D/E.
+	 */
+
+	switch  ((odmdata >> 18) & 3) {
+	case 2:
+	case 3:
+		break;
+	default:
+		return -1;
+	}
+
+	return (odmdata >> 15) & 7;
+}
+#endif
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH
+int auto_scratch(void)
 {
-	static const struct {
-		u32 base;
-		u32 reset_reg;
-		u32 clock_reg;
-		u32 bit;
-	} uarts[] = {
-		{
-			TEGRA_UARTA_BASE,
-			TEGRA_CLK_RESET_BASE + 0x04,
-			TEGRA_CLK_RESET_BASE + 0x10,
-			6,
-		},
-		{
-			TEGRA_UARTB_BASE,
-			TEGRA_CLK_RESET_BASE + 0x04,
-			TEGRA_CLK_RESET_BASE + 0x10,
-			7,
-		},
-		{
-			TEGRA_UARTC_BASE,
-			TEGRA_CLK_RESET_BASE + 0x08,
-			TEGRA_CLK_RESET_BASE + 0x14,
-			23,
-		},
-		{
-			TEGRA_UARTD_BASE,
-			TEGRA_CLK_RESET_BASE + 0x0c,
-			TEGRA_CLK_RESET_BASE + 0x18,
-			1,
-		},
-		{
-			TEGRA_UARTE_BASE,
-			TEGRA_CLK_RESET_BASE + 0x0c,
-			TEGRA_CLK_RESET_BASE + 0x18,
-			2,
-		},
-	};
 	int i;
-	volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
-	u32 chip, div;
 
 	/*
 	 * Look for the first UART that:
@@ -125,20 +159,60 @@ static inline void arch_decomp_setup(void)
 	 * back to what's specified in TEGRA_DEBUG_UART_BASE.
 	 */
 	for (i = 0; i < ARRAY_SIZE(uarts); i++) {
-		if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
-			continue;
-
-		if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+		if (!uart_clocked(i))
 			continue;
 
 		uart = (volatile u8 *)uarts[i].base;
 		if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
 			continue;
 
-		break;
+		return i;
 	}
-	if (i == ARRAY_SIZE(uarts))
-		uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
+
+	return -1;
+}
+#endif
+
+/*
+ * Setup before decompression.  This is where we do UART selection for
+ * earlyprintk and init the uart_base register.
+ */
+static inline void arch_decomp_setup(void)
+{
+	int uart_id, auto_uart_id;
+	volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
+	u32 chip, div;
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTA)
+	uart_id = 0;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
+	uart_id = 1;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
+	uart_id = 2;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
+	uart_id = 3;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
+	uart_id = 4;
+#else
+	uart_id = -1;
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+	auto_uart_id = auto_odmdata();
+#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH)
+	auto_uart_id = auto_scratch();
+#else
+	auto_uart_id = -1;
+#endif
+	if (auto_uart_id != -1)
+		uart_id = auto_uart_id;
+
+	if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) ||
+	    !uart_clocked(uart_id))
+		uart = NULL;
+	else
+		uart = (volatile u8 *)uarts[uart_id].base;
+
 	save_uart_address();
 	if (uart == NULL)
 		return;
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
index de1a0f602b28..935ce9f65590 100644
--- a/arch/arm/mach-tegra/include/mach/usb_phy.h
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -61,8 +61,8 @@ struct tegra_usb_phy {
 	struct usb_phy *ulpi;
 };
 
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
-			void *config, enum tegra_usb_phy_mode phy_mode);
+struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
+	void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
 
 int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
 
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index c238699ae86f..f5b12fb4ff12 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -234,7 +234,7 @@ static const struct file_operations powergate_fops = {
 	.release	= single_release,
 };
 
-static int __init powergate_debugfs_init(void)
+int __init tegra_powergate_debugfs_init(void)
 {
 	struct dentry *d;
 	int err = -ENOMEM;
@@ -247,6 +247,4 @@ static int __init powergate_debugfs_init(void)
 	return err;
 }
 
-late_initcall(powergate_debugfs_init);
-
 #endif
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index bae09b859891..b59315ce3691 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -1486,6 +1486,10 @@ static struct clk tegra_clk_m = {
 };
 
 static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+	{ 12000000, 600000000, 600, 12, 1, 8 },
+	{ 13000000, 600000000, 600, 13, 1, 8 },
+	{ 19200000, 600000000, 500, 16, 1, 6 },
+	{ 26000000, 600000000, 600, 26, 1, 8 },
 	{ 0, 0, 0, 0, 0, 0 },
 };
 
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
index 6d08b53f92d2..e33fe4b14a2a 100644
--- a/arch/arm/mach-tegra/tegra30_clocks.c
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -3015,6 +3015,15 @@ struct clk_duplicate tegra_clk_duplicates[] = {
 	CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
 	CLK_DUPLICATE("twd", "smp_twd", NULL),
 	CLK_DUPLICATE("vcp", "nvavp", "vcp"),
+	CLK_DUPLICATE("i2s0", NULL, "i2s0"),
+	CLK_DUPLICATE("i2s1", NULL, "i2s1"),
+	CLK_DUPLICATE("i2s2", NULL, "i2s2"),
+	CLK_DUPLICATE("i2s3", NULL, "i2s3"),
+	CLK_DUPLICATE("i2s4", NULL, "i2s4"),
+	CLK_DUPLICATE("dam0", NULL, "dam0"),
+	CLK_DUPLICATE("dam1", NULL, "dam1"),
+	CLK_DUPLICATE("dam2", NULL, "dam2"),
+	CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
 };
 
 struct clk *tegra_ptr_clks[] = {
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index d71d2fed6721..54e353c8e304 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <asm/mach-types.h>
@@ -654,8 +655,8 @@ static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
 	clk_disable(phy->clk);
 }
 
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
-			void *config, enum tegra_usb_phy_mode phy_mode)
+struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
+	void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode)
 {
 	struct tegra_usb_phy *phy;
 	struct tegra_ulpi_config *ulpi_config;
@@ -711,6 +712,16 @@ struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
 			err = -ENXIO;
 			goto err1;
 		}
+		if (!gpio_is_valid(ulpi_config->reset_gpio))
+			ulpi_config->reset_gpio =
+				of_get_named_gpio(dev->of_node,
+						  "nvidia,phy-reset-gpio", 0);
+		if (!gpio_is_valid(ulpi_config->reset_gpio)) {
+			pr_err("%s: invalid reset gpio: %d\n", __func__,
+			       ulpi_config->reset_gpio);
+			err = -EINVAL;
+			goto err1;
+		}
 		gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
 		gpio_direction_output(ulpi_config->reset_gpio, 0);
 		phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);