diff options
Diffstat (limited to 'arch/arm/mach-spear/spear1340.c')
| -rw-r--r-- | arch/arm/mach-spear/spear1340.c | 125 |
1 files changed, 1 insertions, 124 deletions
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c index 7b6bff7154e1..3f3c0f124bd3 100644 --- a/arch/arm/mach-spear/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -13,136 +13,13 @@ #define pr_fmt(fmt) "SPEAr1340: " fmt -#include <linux/ahci_platform.h> -#include <linux/amba/serial.h> -#include <linux/delay.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> #include "generic.h" -#include <mach/spear.h> - -/* FIXME: Move SATA PHY code into a standalone driver */ - -/* Base addresses */ -#define SPEAR1340_SATA_BASE UL(0xB1000000) - -/* Power Management Registers */ -#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100) -#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104) -#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108) - -#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318) -#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C) -#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320) - -/* PCIE - SATA configuration registers */ -#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424) - /* PCIE CFG MASks */ - #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11) - #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10) - #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9) - #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8) - #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4) - #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3) - #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2) - #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1) - #define SPEAR1340_PCIE_SATA_SEL_PCIE (0) - #define SPEAR1340_PCIE_SATA_SEL_SATA (1) - #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F - #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \ - SPEAR1340_PCIE_CFG_AUX_CLK_EN | \ - SPEAR1340_PCIE_CFG_CORE_CLK_EN | \ - SPEAR1340_PCIE_CFG_POWERUP_RESET | \ - SPEAR1340_PCIE_CFG_DEVICE_PRESENT) - #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \ - SPEAR1340_SATA_CFG_PM_CLK_EN | \ - SPEAR1340_SATA_CFG_POWERUP_RESET | \ - SPEAR1340_SATA_CFG_RX_CLK_EN | \ - SPEAR1340_SATA_CFG_TX_CLK_EN) - -#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428) - #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31) - #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27) - #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27) - #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27) - #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0) - #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \ - (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ - SPEAR1340_MIPHY_CLK_REF_DIV2 | \ - SPEAR1340_MIPHY_PLL_RATIO_TOP(60)) - #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ - (SPEAR1340_MIPHY_PLL_RATIO_TOP(120)) - #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \ - (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ - SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) - -/* SATA device registration */ -static int sata_miphy_init(struct device *dev, void __iomem *addr) -{ - writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG); - writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK, - SPEAR1340_PCIE_MIPHY_CFG); - /* Switch on sata power domain */ - writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG); - msleep(20); - /* Disable PCIE SATA Controller reset */ - writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)), - SPEAR1340_PERIP1_SW_RST); - msleep(20); - - return 0; -} - -void sata_miphy_exit(struct device *dev) -{ - writel(0, SPEAR1340_PCIE_SATA_CFG); - writel(0, SPEAR1340_PCIE_MIPHY_CFG); - - /* Enable PCIE SATA Controller reset */ - writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)), - SPEAR1340_PERIP1_SW_RST); - msleep(20); - /* Switch off sata power domain */ - writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG); - msleep(20); -} - -int sata_suspend(struct device *dev) -{ - if (dev->power.power_state.event == PM_EVENT_FREEZE) - return 0; - - sata_miphy_exit(dev); - - return 0; -} - -int sata_resume(struct device *dev) -{ - if (dev->power.power_state.event == PM_EVENT_THAW) - return 0; - - return sata_miphy_init(dev, NULL); -} - -static struct ahci_platform_data sata_pdata = { - .init = sata_miphy_init, - .exit = sata_miphy_exit, - .suspend = sata_suspend, - .resume = sata_resume, -}; - -/* Add SPEAr1340 auxdata to pass platform data */ -static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL, - &sata_pdata), - {} -}; static void __init spear1340_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - spear1340_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_simple("spear-cpufreq", -1, NULL, 0); } |
