diff options
Diffstat (limited to 'arch/arm/mach-shmobile')
| -rw-r--r-- | arch/arm/mach-shmobile/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/board-ap4evb.c | 168 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/clock-sh7372.c | 115 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/entry-macro.S | 30 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/gpio.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/head-ap4evb.txt | 87 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/sh7372.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/vmalloc.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/zboot.h | 20 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/zboot_macros.h | 65 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/intc-sh7372.c | 2 |
11 files changed, 452 insertions, 45 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 54b479c35ee0..51dcd59eda6a 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -116,4 +116,6 @@ endmenu config SH_CLK_CPG bool +source "drivers/sh/Kconfig" + endif diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 46ca4d4abf91..ac429ff2c20d 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -61,6 +61,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/setup.h> /* * Address Interface BusWidth note @@ -163,11 +164,13 @@ static struct mtd_partition nor_flash_partitions[] = { .name = "loader", .offset = 0x00000000, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "bootenv", .offset = MTDPART_OFS_APPEND, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "kernel_ro", @@ -565,12 +568,143 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) +static int __fsi_set_rate(struct clk *clk, long rate, int enable) +{ + int ret = 0; + + if (rate <= 0) + return ret; + + if (enable) { + ret = clk_set_rate(clk, rate); + if (0 == ret) + ret = clk_enable(clk); + } else { + clk_disable(clk); + } + + return ret; +} + +static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) +{ + return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable); +} + +static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsia_ick; + struct clk *fsiack; + int ret = -EIO; + + fsia_ick = clk_get(dev, "icka"); + if (IS_ERR(fsia_ick)) + return PTR_ERR(fsia_ick); + + /* + * FSIACK is connected to AK4642, + * and use external clock pin from it. + * it is parent of fsia_ick now. + */ + fsiack = clk_get_parent(fsia_ick); + if (!fsiack) + goto fsia_ick_out; + + /* + * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick + * + ** FIXME ** + * Because the freq_table of external clk (fsiack) are all 0, + * the return value of clk_round_rate became 0. + * So, it use __fsi_set_rate here. + */ + ret = __fsi_set_rate(fsiack, rate, enable); + if (ret < 0) + goto fsiack_out; + + ret = __fsi_set_round_rate(fsia_ick, rate, enable); + if ((ret < 0) && enable) + __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */ + +fsiack_out: + clk_put(fsiack); + +fsia_ick_out: + clk_put(fsia_ick); + + return 0; +} + +static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsib_clk; + struct clk *fdiv_clk = &sh7372_fsidivb_clk; + long fsib_rate = 0; + long fdiv_rate = 0; + int ackmd_bpfmd; + int ret; + + switch (rate) { + case 44100: + fsib_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + break; + case 48000: + fsib_rate = 85428000; /* around 48kHz x 256 x 7 */ + fdiv_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + break; + default: + pr_err("unsupported rate in FSI2 port B\n"); + return -EINVAL; + } + + /* FSI B setting */ + fsib_clk = clk_get(dev, "ickb"); + if (IS_ERR(fsib_clk)) + return -EIO; + + ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable); + clk_put(fsib_clk); + if (ret < 0) + return ret; + + /* FSI DIV setting */ + ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable); + if (ret < 0) { + /* disable FSI B */ + if (enable) + __fsi_set_round_rate(fsib_clk, fsib_rate, 0); + return ret; + } + + return ackmd_bpfmd; +} + +static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +{ + int ret; + + if (is_porta) + ret = fsi_ak4642_set_rate(dev, rate, enable); + else + ret = fsi_hdmi_set_rate(dev, rate, enable); + + return ret; +} + static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | SH_FSI_IN_SLAVE_MODE | SH_FSI_OFMT(PCM) | SH_FSI_IFMT(PCM), + + .portb_flags = SH_FSI_BRS_INV | + SH_FSI_BRM_INV | + SH_FSI_LRS_INV | + SH_FSI_OFMT(SPDIF), + .set_rate = fsi_set_rate, }; static struct resource fsi_resources[] = { @@ -634,6 +768,7 @@ static struct platform_device lcdc1_device = { static struct sh_mobile_hdmi_info hdmi_info = { .lcd_chan = &sh_mobile_lcdc1_info.ch[0], .lcd_dev = &lcdc1_device.dev, + .flags = HDMI_SND_SRC_SPDIF, }; static struct resource hdmi_resources[] = { @@ -835,6 +970,11 @@ static int __init hdmi_init_pm_clock(void) goto out; } + ret = clk_enable(&sh7372_pllc2_clk); + if (ret < 0) { + pr_err("Cannot enable pllc2 clock\n"); + goto out; + } pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); @@ -851,23 +991,11 @@ out: device_initcall(hdmi_init_pm_clock); -#define FSIACK_DUMMY_RATE 48000 static int __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; - /* - * FSIACK is connected to AK4642, - * and the rate is depend on playing sound rate. - * So, set dummy rate (= 48k) here - */ - ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE); - if (ret < 0) { - pr_err("Cannot set FSIACK dummy rate: %d\n", ret); - return ret; - } - fsia_ick = clk_get(&fsi_device.dev, "icka"); if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); @@ -876,16 +1004,9 @@ static int __init fsi_init_pm_clock(void) } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); - if (ret < 0) { - pr_err("Cannot set FSI-A parent: %d\n", ret); - goto out; - } - - ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE); if (ret < 0) - pr_err("Cannot set FSI-A rate: %d\n", ret); + pr_err("Cannot set FSI-A parent: %d\n", ret); -out: clk_put(fsia_ick); return ret; @@ -992,6 +1113,7 @@ static void __init ap4evb_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define USCCR1 0xE6058144 static void __init ap4evb_init(void) { u32 srcr4; @@ -1062,7 +1184,7 @@ static void __init ap4evb_init(void) /* setup USB phy */ __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ - /* enable FSI2 */ + /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); @@ -1079,6 +1201,10 @@ static void __init ap4evb_init(void) gpio_request(GPIO_PORT41, NULL); gpio_direction_input(GPIO_PORT41); + /* setup FSI2 port B (HDMI) */ + gpio_request(GPIO_FN_FSIBCK, NULL); + __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ + /* set SPU2 clock to 119.6 MHz */ clk = clk_get(NULL, "spu_clk"); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 8565aefa21fd..3aa026069435 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -50,6 +50,9 @@ #define SMSTPCR3 0xe615013c #define SMSTPCR4 0xe6150140 +#define FSIDIVA 0xFE1F8000 +#define FSIDIVB 0xFE1F8008 + /* Platforms must set frequency on their DV_CLKI pin */ struct clk sh7372_dv_clki_clk = { }; @@ -217,8 +220,7 @@ static void pllc2_disable(struct clk *clk) __raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR); } -static int pllc2_set_rate(struct clk *clk, - unsigned long rate, int algo_id) +static int pllc2_set_rate(struct clk *clk, unsigned long rate) { unsigned long value; int idx; @@ -227,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk, if (idx < 0) return idx; - if (rate == clk->parent->rate) { - pllc2_disable(clk); - return 0; - } + if (rate == clk->parent->rate) + return -EINVAL; value = __raw_readl(PLLC2CR) & ~(0x3f << 24); - if (value & 0x80000000) - pllc2_disable(clk); - __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR); - if (value & 0x80000000) - return pllc2_enable(clk); - return 0; } @@ -288,6 +282,7 @@ struct clk sh7372_pllc2_clk = { .ops = &pllc2_clk_ops, .parent = &extal1_div2_clk, .freq_table = pllc2_freq_table, + .nr_freqs = ARRAY_SIZE(pllc2_freq_table) - 1, .parent_table = pllc2_parent, .parent_num = ARRAY_SIZE(pllc2_parent), }; @@ -417,6 +412,93 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2), }; +/* FSI DIV */ +static unsigned long fsidiv_recalc(struct clk *clk) +{ + unsigned long value; + + value = __raw_readl(clk->mapping->base); + + if ((value & 0x3) != 0x3) + return 0; + + value >>= 16; + if (value < 2) + return 0; + + return clk->parent->rate / value; +} + +static long fsidiv_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_div_range_round(clk, 2, 0xffff, rate); +} + +static void fsidiv_disable(struct clk *clk) +{ + __raw_writel(0, clk->mapping->base); +} + +static int fsidiv_enable(struct clk *clk) +{ + unsigned long value; + + value = __raw_readl(clk->mapping->base) >> 16; + if (value < 2) + return -EIO; + + __raw_writel((value << 16) | 0x3, clk->mapping->base); + + return 0; +} + +static int fsidiv_set_rate(struct clk *clk, unsigned long rate) +{ + int idx; + + idx = (clk->parent->rate / rate) & 0xffff; + if (idx < 2) + return -EINVAL; + + __raw_writel(idx << 16, clk->mapping->base); + return 0; +} + +static struct clk_ops fsidiv_clk_ops = { + .recalc = fsidiv_recalc, + .round_rate = fsidiv_round_rate, + .set_rate = fsidiv_set_rate, + .enable = fsidiv_enable, + .disable = fsidiv_disable, +}; + +static struct clk_mapping sh7372_fsidiva_clk_mapping = { + .phys = FSIDIVA, + .len = 8, +}; + +struct clk sh7372_fsidiva_clk = { + .ops = &fsidiv_clk_ops, + .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */ + .mapping = &sh7372_fsidiva_clk_mapping, +}; + +static struct clk_mapping sh7372_fsidivb_clk_mapping = { + .phys = FSIDIVB, + .len = 8, +}; + +struct clk sh7372_fsidivb_clk = { + .ops = &fsidiv_clk_ops, + .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */ + .mapping = &sh7372_fsidivb_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &sh7372_fsidiva_clk, + &sh7372_fsidivb_clk, +}; + enum { MSTP001, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, @@ -510,8 +592,6 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), - CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]), - CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]), CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), @@ -548,8 +628,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */ + CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ + CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */ @@ -585,6 +665,9 @@ void __init sh7372_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S index a285d13c7416..f428c4db2b60 100644 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -1,4 +1,5 @@ /* + * Copyright (C) 2010 Magnus Damm * Copyright (C) 2008 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify @@ -14,24 +15,45 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <mach/hardware.h> #include <mach/irqs.h> +#define INTCA_BASE 0xe6980000 +#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */ +#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */ +#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */ +#define INTLVLB_OFFS 0x00000034 /* previous priority level */ + .macro disable_fiq .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =INTFLGA + ldr \base, =INTCA_BASE .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base] + /* The single INTFLGA read access below results in the following: + * + * 1. INTLVLB is updated with old priority value from INTLVLA + * 2. Highest priority interrupt is accepted + * 3. INTLVLA is updated to contain priority of accepted interrupt + * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA + */ + ldr \irqnr, [\base, #INTFLGA_OFFS] + + /* Restore INTLVLA with the value saved in INTLVLB. + * This is required to support interrupt priorities properly. + */ + ldrb \tmp, [\base, #INTLVLB_OFFS] + strb \tmp, [\base, #INTLVLA_OFFS] + + /* Handle invalid vector number case */ cmp \irqnr, #0 beq 1000f - /* intevt to irq number */ + + /* Convert vector to irq number, same as the evt2irq() macro */ lsr \irqnr, \irqnr, #0x5 subs \irqnr, \irqnr, #16 diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index 5bc6bd444d72..2b1bb9e43dda 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -35,12 +35,12 @@ static inline int gpio_cansleep(unsigned gpio) static inline int gpio_to_irq(unsigned gpio) { - return -ENOSYS; + return __gpio_to_irq(gpio); } static inline int irq_to_gpio(unsigned int irq) { - return -EINVAL; + return -ENOSYS; } #endif /* CONFIG_GPIOLIB */ diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt new file mode 100644 index 000000000000..e3ebfa73956e --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt @@ -0,0 +1,87 @@ +LIST "partner-jet-setup.txt" +LIST "(C) Copyright 2010 Renesas Solutions Corp" +LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>" + +LIST "RWT Setting" +EW 0xE6020004, 0xA500 +EW 0xE6030004, 0xA500 + +DD 0x01001000, 0x01001000 + +LIST "GPIO Setting" +EB 0xE6051013, 0xA2 + +LIST "CPG" +ED 0xE6150080, 0x00000180 +ED 0xE61500C0, 0x00000002 + +WAIT 1, 0xFE40009C + +LIST "FRQCR" +ED 0xE6150000, 0x2D1305C3 +ED 0xE61500E0, 0x9E40358E +ED 0xE6150004, 0x80331050 + +WAIT 1, 0xFE40009C + +ED 0xE61500E4, 0x00002000 + +WAIT 1, 0xFE40009C + +LIST "PLL" +ED 0xE6150028, 0x00004000 + +WAIT 1, 0xFE40009C + +ED 0xE615002C, 0x93000040 + +WAIT 1, 0xFE40009C + +LIST "BSC" +ED 0xFEC10000, 0x00E0001B + +LIST "SBSC1" +ED 0xFE400354, 0x01AD8000 +ED 0xFE400354, 0x01AD8001 + +WAIT 5, 0xFE40009C + +ED 0xFE400008, 0xBCC90151 +ED 0xFE400040, 0x41774113 +ED 0xFE400044, 0x2712E229 +ED 0xFE400048, 0x20C18505 +ED 0xFE40004C, 0x00110209 +ED 0xFE400010, 0x00000087 + +WAIT 10, 0xFE40009C + +ED 0xFE400084, 0x0000003F +EB 0xFE500000, 0x00 + +WAIT 5, 0xFE40009C + +ED 0xFE400084, 0x0000FF0A +EB 0xFE500000, 0x00 + +WAIT 1, 0xFE40009C + +ED 0xFE400084, 0x00002201 +EB 0xFE500000, 0x00 +ED 0xFE400084, 0x00000302 +EB 0xFE500000, 0x00 +EB 0xFE5C0000, 0x00 +ED 0xFE400008, 0xBCC90159 +ED 0xFE40008C, 0x88800004 +ED 0xFE400094, 0x00000004 +ED 0xFE400028, 0xA55A0032 +ED 0xFE40002C, 0xA55A000C +ED 0xFE400020, 0xA55A2048 +ED 0xFE400008, 0xBCC90959 + +LIST "Change CPGA setting" +ED 0xE61500E0, 0x9E40352E +ED 0xE6150004, 0x80331050 + +WAIT 1, 0xFE40009C + +ED 0xE6150354, 0x00000002 diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 147775a94bce..e4f9004e7103 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -464,5 +464,7 @@ extern struct clk sh7372_dv_clki_div2_clk; extern struct clk sh7372_pllc2_clk; extern struct clk sh7372_fsiack_clk; extern struct clk sh7372_fsibck_clk; +extern struct clk sh7372_fsidiva_clk; +extern struct clk sh7372_fsidivb_clk; #endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h index 4aecf6e3a859..2b8fd8b942fe 100644 --- a/arch/arm/mach-shmobile/include/mach/vmalloc.h +++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h @@ -2,6 +2,6 @@ #define __ASM_MACH_VMALLOC_H /* Vmalloc at ... - 0xe5ffffff */ -#define VMALLOC_END 0xe6000000 +#define VMALLOC_END 0xe6000000UL #endif /* __ASM_MACH_VMALLOC_H */ diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h new file mode 100644 index 000000000000..3ad86b7708e9 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -0,0 +1,20 @@ +#ifndef ZBOOT_H +#define ZBOOT_H + +#include <asm/mach-types.h> +#include <mach/zboot_macros.h> + +/************************************************** + * + * board specific settings + * + **************************************************/ + +#ifdef CONFIG_MACH_AP4EVB +#define MACH_TYPE MACH_TYPE_AP4EVB +#include "mach/head-ap4evb.txt" +#else +#error "unsupported board." +#endif + +#endif /* ZBOOT_H */ diff --git a/arch/arm/mach-shmobile/include/mach/zboot_macros.h b/arch/arm/mach-shmobile/include/mach/zboot_macros.h new file mode 100644 index 000000000000..aa6111fbc989 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/zboot_macros.h @@ -0,0 +1,65 @@ +#ifndef __ZBOOT_MACRO_H +#define __ZBOOT_MACRO_H + +/* The LIST command is used to include comments in the script */ +.macro LIST comment +.endm + +/* The ED command is used to write a 32-bit word */ +.macro ED, addr, data + LDR r0, 1f + LDR r1, 2f + STR r1, [r0] + B 3f +1 : .long \addr +2 : .long \data +3 : +.endm + +/* The EW command is used to write a 16-bit word */ +.macro EW, addr, data + LDR r0, 1f + LDR r1, 2f + STRH r1, [r0] + B 3f +1 : .long \addr +2 : .long \data +3 : +.endm + +/* The EB command is used to write an 8-bit word */ +.macro EB, addr, data + LDR r0, 1f + LDR r1, 2f + STRB r1, [r0] + B 3f +1 : .long \addr +2 : .long \data +3 : +.endm + +/* The WAIT command is used to delay the execution */ +.macro WAIT, time, reg + LDR r1, 1f + LDR r0, 2f + STR r0, [r1] +10 : + LDR r0, [r1] + CMP r0, #0x00000000 + BNE 10b + NOP + B 3f +1 : .long \reg +2 : .long \time * 100 +3 : +.endm + +/* The DD command is used to read a 32-bit word */ +.macro DD, start, end + LDR r1, 1f + B 2f +1 : .long \start +2 : +.endm + +#endif /* __ZBOOT_MACRO_H */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 4cd3cae38e72..30b2f400666a 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -98,7 +98,7 @@ static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0), INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220), INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260), - INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0), + INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0), INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0), INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320), INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360), |
