diff options
Diffstat (limited to 'arch/arm/mach-shmobile/board-armadillo800eva-reference.c')
| -rw-r--r-- | arch/arm/mach-shmobile/board-armadillo800eva-reference.c | 198 |
1 files changed, 0 insertions, 198 deletions
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c deleted file mode 100644 index 84bc6cb6d5aa..000000000000 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * armadillo 800 eva board support - * - * Copyright (C) 2012 Renesas Solutions Corp. - * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/hardware/cache-l2x0.h> - -#include "common.h" -#include "r8a7740.h" - -/* - * CON1 Camera Module - * CON2 Extension Bus - * CON3 HDMI Output - * CON4 Composite Video Output - * CON5 H-UDI JTAG - * CON6 ARM JTAG - * CON7 SD1 - * CON8 SD2 - * CON9 RTC BackUp - * CON10 Monaural Mic Input - * CON11 Stereo Headphone Output - * CON12 Audio Line Output(L) - * CON13 Audio Line Output(R) - * CON14 AWL13 Module - * CON15 Extension - * CON16 LCD1 - * CON17 LCD2 - * CON19 Power Input - * CON20 USB1 - * CON21 USB2 - * CON22 Serial - * CON23 LAN - * CON24 USB3 - * LED1 Camera LED (Yellow) - * LED2 Power LED (Green) - * LED3-LED6 User LED (Yellow) - * LED7 LAN link LED (Green) - * LED8 LAN activity LED (Yellow) - */ - -/* - * DipSwitch - * - * SW1 - * - * -12345678-+---------------+---------------------------- - * 1 | boot | hermit - * 0 | boot | OS auto boot - * -12345678-+---------------+---------------------------- - * 00 | boot device | eMMC - * 10 | boot device | SDHI0 (CON7) - * 01 | boot device | - - * 11 | boot device | Extension Buss (CS0) - * -12345678-+---------------+---------------------------- - * 0 | Extension Bus | D8-D15 disable, eMMC enable - * 1 | Extension Bus | D8-D15 enable, eMMC disable - * -12345678-+---------------+---------------------------- - * 0 | SDHI1 | COM8 disable, COM14 enable - * 1 | SDHI1 | COM8 enable, COM14 disable - * -12345678-+---------------+---------------------------- - * 0 | USB0 | COM20 enable, COM24 disable - * 1 | USB0 | COM20 disable, COM24 enable - * -12345678-+---------------+---------------------------- - * 00 | JTAG | SH-X2 - * 10 | JTAG | ARM - * 01 | JTAG | - - * 11 | JTAG | Boundary Scan - *-----------+---------------+---------------------------- - */ - -/* - * FSI-WM8978 - * - * this command is required when playback. - * - * # amixer set "Headphone" 50 - * - * this command is required when capture. - * - * # amixer set "Input PGA" 15 - * # amixer set "Left Input Mixer MicP" on - * # amixer set "Left Input Mixer MicN" on - * # amixer set "Right Input Mixer MicN" on - * # amixer set "Right Input Mixer MicP" on - */ - -/* - * USB function - * - * When you use USB Function, - * set SW1.6 ON, and connect cable to CN24. - * - * USBF needs workaround on R8A7740 chip. - * These are a little bit complex. - * see - * usbhsf_power_ctrl() - */ - -static void __init eva_clock_init(void) -{ - struct clk *system = clk_get(NULL, "system_clk"); - struct clk *xtal1 = clk_get(NULL, "extal1"); - struct clk *usb24s = clk_get(NULL, "usb24s"); - struct clk *fsibck = clk_get(NULL, "fsibck"); - - if (IS_ERR(system) || - IS_ERR(xtal1) || - IS_ERR(usb24s) || - IS_ERR(fsibck)) { - pr_err("armadillo800eva board clock init failed\n"); - goto clock_error; - } - - /* armadillo 800 eva extal1 is 24MHz */ - clk_set_rate(xtal1, 24000000); - - /* usb24s use extal1 (= system) clock (= 24MHz) */ - clk_set_parent(usb24s, system); - - /* FSIBCK is 12.288MHz, and it is parent of FSI-B */ - clk_set_rate(fsibck, 12288000); - -clock_error: - if (!IS_ERR(system)) - clk_put(system); - if (!IS_ERR(xtal1)) - clk_put(xtal1); - if (!IS_ERR(usb24s)) - clk_put(usb24s); - if (!IS_ERR(fsibck)) - clk_put(fsibck); -} - -/* - * board init - */ -static void __init eva_init(void) -{ - r8a7740_clock_init(MD_CK0 | MD_CK2); - eva_clock_init(); - - r8a7740_meram_workaround(); - -#ifdef CONFIG_CACHE_L2X0 - /* Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); -#endif - - r8a7740_add_standard_devices_dt(); - - r8a7740_pm_init(); -} - -#define RESCNT2 IOMEM(0xe6188020) -static void eva_restart(enum reboot_mode mode, const char *cmd) -{ - /* Do soft power on reset */ - writel(1 << 31, RESCNT2); -} - -static const char *eva_boards_compat_dt[] __initdata = { - "renesas,armadillo800eva-reference", - NULL, -}; - -DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference") - .map_io = r8a7740_map_io, - .init_early = shmobile_init_delay, - .init_irq = r8a7740_init_irq_of, - .init_machine = eva_init, - .init_late = shmobile_init_late, - .dt_compat = eva_boards_compat_dt, - .restart = eva_restart, -MACHINE_END |
