diff options
Diffstat (limited to 'arch/arm/mach-shmobile/board-ap4evb.c')
| -rw-r--r-- | arch/arm/mach-shmobile/board-ap4evb.c | 167 |
1 files changed, 146 insertions, 21 deletions
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 46ca4d4abf91..d440e5f456ad 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -163,11 +163,13 @@ static struct mtd_partition nor_flash_partitions[] = { .name = "loader", .offset = 0x00000000, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "bootenv", .offset = MTDPART_OFS_APPEND, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "kernel_ro", @@ -565,12 +567,143 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) +static int __fsi_set_rate(struct clk *clk, long rate, int enable) +{ + int ret = 0; + + if (rate <= 0) + return ret; + + if (enable) { + ret = clk_set_rate(clk, rate); + if (0 == ret) + ret = clk_enable(clk); + } else { + clk_disable(clk); + } + + return ret; +} + +static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) +{ + return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable); +} + +static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsia_ick; + struct clk *fsiack; + int ret = -EIO; + + fsia_ick = clk_get(dev, "icka"); + if (IS_ERR(fsia_ick)) + return PTR_ERR(fsia_ick); + + /* + * FSIACK is connected to AK4642, + * and use external clock pin from it. + * it is parent of fsia_ick now. + */ + fsiack = clk_get_parent(fsia_ick); + if (!fsiack) + goto fsia_ick_out; + + /* + * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick + * + ** FIXME ** + * Because the freq_table of external clk (fsiack) are all 0, + * the return value of clk_round_rate became 0. + * So, it use __fsi_set_rate here. + */ + ret = __fsi_set_rate(fsiack, rate, enable); + if (ret < 0) + goto fsiack_out; + + ret = __fsi_set_round_rate(fsia_ick, rate, enable); + if ((ret < 0) && enable) + __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */ + +fsiack_out: + clk_put(fsiack); + +fsia_ick_out: + clk_put(fsia_ick); + + return 0; +} + +static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsib_clk; + struct clk *fdiv_clk = &sh7372_fsidivb_clk; + long fsib_rate = 0; + long fdiv_rate = 0; + int ackmd_bpfmd; + int ret; + + switch (rate) { + case 44100: + fsib_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + break; + case 48000: + fsib_rate = 85428000; /* around 48kHz x 256 x 7 */ + fdiv_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + break; + default: + pr_err("unsupported rate in FSI2 port B\n"); + return -EINVAL; + } + + /* FSI B setting */ + fsib_clk = clk_get(dev, "ickb"); + if (IS_ERR(fsib_clk)) + return -EIO; + + ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable); + clk_put(fsib_clk); + if (ret < 0) + return ret; + + /* FSI DIV setting */ + ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable); + if (ret < 0) { + /* disable FSI B */ + if (enable) + __fsi_set_round_rate(fsib_clk, fsib_rate, 0); + return ret; + } + + return ackmd_bpfmd; +} + +static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +{ + int ret; + + if (is_porta) + ret = fsi_ak4642_set_rate(dev, rate, enable); + else + ret = fsi_hdmi_set_rate(dev, rate, enable); + + return ret; +} + static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | SH_FSI_IN_SLAVE_MODE | SH_FSI_OFMT(PCM) | SH_FSI_IFMT(PCM), + + .portb_flags = SH_FSI_BRS_INV | + SH_FSI_BRM_INV | + SH_FSI_LRS_INV | + SH_FSI_OFMT(SPDIF), + .set_rate = fsi_set_rate, }; static struct resource fsi_resources[] = { @@ -634,6 +767,7 @@ static struct platform_device lcdc1_device = { static struct sh_mobile_hdmi_info hdmi_info = { .lcd_chan = &sh_mobile_lcdc1_info.ch[0], .lcd_dev = &lcdc1_device.dev, + .flags = HDMI_SND_SRC_SPDIF, }; static struct resource hdmi_resources[] = { @@ -835,6 +969,11 @@ static int __init hdmi_init_pm_clock(void) goto out; } + ret = clk_enable(&sh7372_pllc2_clk); + if (ret < 0) { + pr_err("Cannot enable pllc2 clock\n"); + goto out; + } pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); @@ -851,23 +990,11 @@ out: device_initcall(hdmi_init_pm_clock); -#define FSIACK_DUMMY_RATE 48000 static int __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; - /* - * FSIACK is connected to AK4642, - * and the rate is depend on playing sound rate. - * So, set dummy rate (= 48k) here - */ - ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE); - if (ret < 0) { - pr_err("Cannot set FSIACK dummy rate: %d\n", ret); - return ret; - } - fsia_ick = clk_get(&fsi_device.dev, "icka"); if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); @@ -876,16 +1003,9 @@ static int __init fsi_init_pm_clock(void) } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); - if (ret < 0) { - pr_err("Cannot set FSI-A parent: %d\n", ret); - goto out; - } - - ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE); if (ret < 0) - pr_err("Cannot set FSI-A rate: %d\n", ret); + pr_err("Cannot set FSI-A parent: %d\n", ret); -out: clk_put(fsia_ick); return ret; @@ -992,6 +1112,7 @@ static void __init ap4evb_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define USCCR1 0xE6058144 static void __init ap4evb_init(void) { u32 srcr4; @@ -1062,7 +1183,7 @@ static void __init ap4evb_init(void) /* setup USB phy */ __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ - /* enable FSI2 */ + /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); @@ -1079,6 +1200,10 @@ static void __init ap4evb_init(void) gpio_request(GPIO_PORT41, NULL); gpio_direction_input(GPIO_PORT41); + /* setup FSI2 port B (HDMI) */ + gpio_request(GPIO_FN_FSIBCK, NULL); + __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ + /* set SPU2 clock to 119.6 MHz */ clk = clk_get(NULL, "spu_clk"); if (!IS_ERR(clk)) { |
