diff options
Diffstat (limited to 'arch/arm/mach-s5pv210/mach-aquila.c')
| -rw-r--r-- | arch/arm/mach-s5pv210/mach-aquila.c | 417 |
1 files changed, 398 insertions, 19 deletions
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 881fe89eefd2..0dda8012d6b2 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -13,6 +13,12 @@ #include <linux/init.h> #include <linux/serial_core.h> #include <linux/fb.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/mfd/max8998.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -23,54 +29,63 @@ #include <mach/regs-clock.h> #include <mach/regs-fb.h> +#include <plat/gpio-cfg.h> #include <plat/regs-serial.h> #include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> +#include <plat/fimc-core.h> +#include <plat/sdhci.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ +#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ S3C2410_UCON_TXIRQMODE | \ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI | \ S3C2443_UCON_RXERR_IRQEN) -#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 +#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8 -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) +#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE -static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { +static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = AQUILA_UCON_DEFAULT, + .ulcon = AQUILA_ULCON_DEFAULT, + /* + * Actually UART0 can support 256 bytes fifo, but aquila board + * supports 128 bytes fifo because of initial chip bug + */ + .ufcon = AQUILA_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128, }, [1] = { .hwport = 1, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = AQUILA_UCON_DEFAULT, + .ulcon = AQUILA_ULCON_DEFAULT, + .ufcon = AQUILA_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64, }, [2] = { .hwport = 2, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = AQUILA_UCON_DEFAULT, + .ulcon = AQUILA_ULCON_DEFAULT, + .ufcon = AQUILA_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, }, [3] = { .hwport = 3, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = AQUILA_UCON_DEFAULT, + .ulcon = AQUILA_ULCON_DEFAULT, + .ufcon = AQUILA_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, }, }; @@ -114,19 +129,383 @@ static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +/* MAX8998 regulators */ +#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) + +static struct regulator_init_data aquila_ldo2_data = { + .constraints = { + .name = "VALIVE_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data aquila_ldo3_data = { + .constraints = { + .name = "VUSB/MIPI_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo4_data = { + .constraints = { + .name = "VDAC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data aquila_ldo5_data = { + .constraints = { + .name = "VTF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data aquila_ldo6_data = { + .constraints = { + .name = "VCC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data aquila_ldo7_data = { + .constraints = { + .name = "VCC_3.0V", + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = 1, + .boot_on = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo8_data = { + .constraints = { + .name = "VUSB/VADC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo9_data = { + .constraints = { + .name = "VCC/VCAM_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo10_data = { + .constraints = { + .name = "VPLL_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .boot_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo11_data = { + .constraints = { + .name = "CAM_IO_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo12_data = { + .constraints = { + .name = "CAM_ISP_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo13_data = { + .constraints = { + .name = "CAM_A_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo14_data = { + .constraints = { + .name = "CAM_CIF_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo15_data = { + .constraints = { + .name = "CAM_AF_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo16_data = { + .constraints = { + .name = "VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo17_data = { + .constraints = { + .name = "CAM_8M_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +/* BUCK */ +static struct regulator_consumer_supply buck1_consumer[] = { + { .supply = "vddarm", }, +}; + +static struct regulator_consumer_supply buck2_consumer[] = { + { .supply = "vddint", }, +}; + +static struct regulator_init_data aquila_buck1_data = { + .constraints = { + .name = "VARM_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), + .consumer_supplies = buck1_consumer, +}; + +static struct regulator_init_data aquila_buck2_data = { + .constraints = { + .name = "VINT_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), + .consumer_supplies = buck2_consumer, +}; + +static struct regulator_init_data aquila_buck3_data = { + .constraints = { + .name = "VCC_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data aquila_buck4_data = { + .constraints = { + .name = "CAM_CORE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct max8998_regulator_data aquila_regulators[] = { + { MAX8998_LDO2, &aquila_ldo2_data }, + { MAX8998_LDO3, &aquila_ldo3_data }, + { MAX8998_LDO4, &aquila_ldo4_data }, + { MAX8998_LDO5, &aquila_ldo5_data }, + { MAX8998_LDO6, &aquila_ldo6_data }, + { MAX8998_LDO7, &aquila_ldo7_data }, + { MAX8998_LDO8, &aquila_ldo8_data }, + { MAX8998_LDO9, &aquila_ldo9_data }, + { MAX8998_LDO10, &aquila_ldo10_data }, + { MAX8998_LDO11, &aquila_ldo11_data }, + { MAX8998_LDO12, &aquila_ldo12_data }, + { MAX8998_LDO13, &aquila_ldo13_data }, + { MAX8998_LDO14, &aquila_ldo14_data }, + { MAX8998_LDO15, &aquila_ldo15_data }, + { MAX8998_LDO16, &aquila_ldo16_data }, + { MAX8998_LDO17, &aquila_ldo17_data }, + { MAX8998_BUCK1, &aquila_buck1_data }, + { MAX8998_BUCK2, &aquila_buck2_data }, + { MAX8998_BUCK3, &aquila_buck3_data }, + { MAX8998_BUCK4, &aquila_buck4_data }, +}; + +static struct max8998_platform_data aquila_max8998_pdata = { + .num_regulators = ARRAY_SIZE(aquila_regulators), + .regulators = aquila_regulators, +}; +#endif + +/* GPIO I2C PMIC */ +#define AP_I2C_GPIO_PMIC_BUS_4 4 +static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = { + .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */ + .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */ +}; + +static struct platform_device aquila_i2c_gpio_pmic = { + .name = "i2c-gpio", + .id = AP_I2C_GPIO_PMIC_BUS_4, + .dev = { + .platform_data = &aquila_i2c_gpio_pmic_data, + }, +}; + +static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { +#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) + { + /* 0xCC when SRAD = 0 */ + I2C_BOARD_INFO("max8998", 0xCC >> 1), + .platform_data = &aquila_max8998_pdata, + }, +#endif +}; + +/* PMIC Power button */ +static struct gpio_keys_button aquila_gpio_keys_table[] = { + { + .code = KEY_POWER, + .gpio = S5PV210_GPH2(6), + .desc = "gpio-keys: KEY_POWER", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data aquila_gpio_keys_data = { + .buttons = aquila_gpio_keys_table, + .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table), +}; + +static struct platform_device aquila_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &aquila_gpio_keys_data, + }, +}; + +static void __init aquila_pmic_init(void) +{ + /* AP_PMIC_IRQ: EINT7 */ + s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP); + + /* nPower: EINT22 */ + s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP); +} + +/* MoviNAND */ +static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_PERMANENT, +}; + +/* Wireless LAN */ +static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_EXTERNAL, + /* ext_cd_{init,cleanup} callbacks will be added later */ +}; + +/* External Flash */ +#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4) +#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4) +static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = AQUILA_EXT_FLASH_CD, + .ext_cd_gpio_invert = 1, +}; + +static void aquila_setup_sdhci(void) +{ + gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN"); + gpio_direction_output(AQUILA_EXT_FLASH_EN, 1); + + s3c_sdhci0_set_platdata(&aquila_hsmmc0_data); + s3c_sdhci1_set_platdata(&aquila_hsmmc1_data); + s3c_sdhci2_set_platdata(&aquila_hsmmc2_data); +}; + static struct platform_device *aquila_devices[] __initdata = { + &aquila_i2c_gpio_pmic, + &aquila_device_gpiokeys, &s3c_device_fb, + &s5pc110_device_onenand, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, }; static void __init aquila_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); + s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); } static void __init aquila_machine_init(void) { + /* PMIC */ + aquila_pmic_init(); + i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, + ARRAY_SIZE(i2c_gpio_pmic_devs)); + /* SDHCI */ + aquila_setup_sdhci(); + + s3c_fimc_setname(0, "s5p-fimc"); + s3c_fimc_setname(1, "s5p-fimc"); + s3c_fimc_setname(2, "s5p-fimc"); + /* FB */ s3c_fb_set_platdata(&aquila_lcd_pdata); |
