1 files changed, 66 insertions, 4 deletions

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 530654474bb2..dd759d03a9fd 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -38,6 +39,7 @@
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 #include <asm/arch/littleton.h>
 
 #include "generic.h"
@@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	}
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &littleton_smc91x_info,
+	},
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /* use bit 30, 31 as the indicator of command parameter number */
 #define CMD0(x)		((0x00000000) | ((x) << 9))
 #define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+	pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
@@ -374,6 +435,7 @@ static void __init littleton_init(void)
 
 	littleton_init_lcd();
 	littleton_init_keypad();
+	littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")