diff options
Diffstat (limited to 'arch/arm/mach-orion5x/net2big-setup.c')
| -rw-r--r-- | arch/arm/mach-orion5x/net2big-setup.c | 44 |
1 files changed, 22 insertions, 22 deletions
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index a5930f83958b..e43b39cc7fe9 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -339,28 +339,28 @@ static struct platform_device net2big_gpio_buttons = { * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Raid mode (bit 0) */ - { 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */ - { 2, MPP_GPIO }, /* Raid mode (bit 1) */ - { 3, MPP_GPIO }, /* Board ID (bit 0) */ - { 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */ - { 5, MPP_GPIO }, /* Fan fail detection */ - { 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */ - { 7, MPP_GPIO }, /* Disable initial blinking on front LED */ - { 8, MPP_GPIO }, /* Rear power switch (on|auto) */ - { 9, MPP_GPIO }, /* Rear power switch (auto|off) */ - { 10, MPP_GPIO }, /* SATA 1 red LED (0 = Off, 1 = On) */ - { 11, MPP_GPIO }, /* SATA 0 red LED (0 = Off, 1 = On) */ - { 12, MPP_GPIO }, /* Board ID (bit 1) */ - { 13, MPP_GPIO }, /* SATA 1 blue LED blink control */ - { 14, MPP_SATA_LED }, - { 15, MPP_SATA_LED }, - { 16, MPP_GPIO }, /* Blue front LED control */ - { 17, MPP_GPIO }, /* SATA 0 blue LED blink control */ - { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ - { 19, MPP_GPIO }, /* SATA{0,1} power On/Off request */ - { -1 } +static unsigned int net2big_mpp_modes[] __initdata = { + MPP0_GPIO, /* Raid mode (bit 0) */ + MPP1_GPIO, /* USB port 2 fuse (0 = Fail, 1 = Ok) */ + MPP2_GPIO, /* Raid mode (bit 1) */ + MPP3_GPIO, /* Board ID (bit 0) */ + MPP4_GPIO, /* Fan activity (0 = Off, 1 = On) */ + MPP5_GPIO, /* Fan fail detection */ + MPP6_GPIO, /* Red front LED (0 = Off, 1 = On) */ + MPP7_GPIO, /* Disable initial blinking on front LED */ + MPP8_GPIO, /* Rear power switch (on|auto) */ + MPP9_GPIO, /* Rear power switch (auto|off) */ + MPP10_GPIO, /* SATA 1 red LED (0 = Off, 1 = On) */ + MPP11_GPIO, /* SATA 0 red LED (0 = Off, 1 = On) */ + MPP12_GPIO, /* Board ID (bit 1) */ + MPP13_GPIO, /* SATA 1 blue LED blink control */ + MPP14_SATA_LED, + MPP15_SATA_LED, + MPP16_GPIO, /* Blue front LED control */ + MPP17_GPIO, /* SATA 0 blue LED blink control */ + MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ + MPP19_GPIO, /* SATA{0,1} power On/Off request */ + 0, /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ /* 23: SATA 0 power status */ /* 24: Board power off */ |
