3 files changed, 56 insertions, 31 deletions

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 2ceb75d21eb2..39fba9df17fb 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -602,20 +602,6 @@ static void __init omap_sfh7741prox_init(void)
 			__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
 }
 
-static void sdp4430_hdmi_mux_init(void)
-{
-	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
-	omap_mux_init_signal("hdmi_hpd",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-}
-
 static struct gpio sdp4430_hdmi_gpios[] = {
 	{ HDMI_GPIO_HPD,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_hpd"   },
 	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_ls_oe" },
@@ -833,9 +819,16 @@ static void omap_4430sdp_display_init(void)
 		pr_err("%s: Could not get display_sel GPIO\n", __func__);
 
 	sdp4430_lcd_init();
-	sdp4430_hdmi_mux_init();
 	sdp4430_picodlp_init();
 	omap_display_init(&sdp4430_dss_data);
+	/*
+	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+	 * later have external pull up on the HDMI I2C lines
+	 */
+	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+	else
+		omap_hdmi_init(0);
 }
 
 #ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e96a2e7ad36f..30ad40db2cf3 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -412,21 +412,6 @@ int __init omap4_panda_dvi_init(void)
 	return r;
 }
 
-
-static void omap4_panda_hdmi_mux_init(void)
-{
-	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
-	omap_mux_init_signal("hdmi_hpd",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-}
-
 static struct gpio panda_hdmi_gpios[] = {
 	{ HDMI_GPIO_HPD,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd"   },
 	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
@@ -478,8 +463,16 @@ void omap4_panda_display_init(void)
 	if (r)
 		pr_err("error initializing panda DVI\n");
 
-	omap4_panda_hdmi_mux_init();
 	omap_display_init(&omap4_panda_dss_data);
+
+	/*
+	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+	 * later have external pull up on the HDMI I2C lines
+	 */
+	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+	else
+		omap_hdmi_init(0);
 }
 
 static void __init omap4_panda_init(void)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index bc6cf863a563..3c446d1a1781 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -30,6 +30,7 @@
 #include <plat/omap-pm.h>
 #include "common.h"
 
+#include "mux.h"
 #include "control.h"
 #include "display.h"
 
@@ -97,6 +98,36 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
+static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
+{
+	u32 reg;
+	u16 control_i2c_1;
+
+	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+	omap_mux_init_signal("hdmi_hpd",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_cec",
+			OMAP_PIN_INPUT_PULLUP);
+	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+	omap_mux_init_signal("hdmi_ddc_scl",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_ddc_sda",
+			OMAP_PIN_INPUT_PULLUP);
+
+	/*
+	 * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
+	 * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
+	 * internal pull up resistor.
+	 */
+	if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
+		control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
+		reg = omap4_ctrl_pad_readl(control_i2c_1);
+		reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
+			OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
+			omap4_ctrl_pad_writel(reg, control_i2c_1);
+	}
+}
+
 static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 {
 	u32 enable_mask, enable_shift;
@@ -130,6 +161,14 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 	return 0;
 }
 
+int omap_hdmi_init(enum omap_hdmi_flags flags)
+{
+	if (cpu_is_omap44xx())
+		omap4_hdmi_mux_pads(flags);
+
+	return 0;
+}
+
 static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
 	if (cpu_is_omap44xx())