diff options
Diffstat (limited to 'arch/arm/mach-omap2/serial.c')
| -rw-r--r-- | arch/arm/mach-omap2/serial.c | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c new file mode 100644 index 000000000000..f4df04fe1dd8 --- /dev/null +++ b/arch/arm/mach-omap2/serial.c @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-omap/omap2/serial.c + * + * OMAP2 serial support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Based off of arch/arm/mach-omap/omap1/serial.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include <asm/io.h> +#include <asm/hardware/clock.h> + +#include <asm/arch/common.h> +#include <asm/arch/board.h> + +static struct clk * uart1_ick = NULL; +static struct clk * uart1_fck = NULL; +static struct clk * uart2_ick = NULL; +static struct clk * uart2_fck = NULL; +static struct clk * uart3_ick = NULL; +static struct clk * uart3_fck = NULL; + +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (char *)IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = (unsigned long)OMAP_UART1_BASE, + .irq = 72, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = (unsigned long)OMAP_UART2_BASE, + .irq = 73, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = (unsigned long)OMAP_UART3_BASE, + .irq = 74, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .flags = 0 + } +}; + +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) +{ + offset <<= up->regshift; + return (unsigned int)__raw_readb(up->membase + offset); +} + +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) +{ + offset <<= p->regshift; + __raw_writeb(value, (unsigned long)(p->membase + offset)); +} + +/* + * Internal UARTs need to be initialized for the 8250 autoconfig to work + * properly. Note that the TX watermark initialization may not be needed + * once the 8250.c watermark handling code is merged. + */ +static inline void __init omap_serial_reset(struct plat_serial8250_port *p) +{ + serial_write_reg(p, UART_OMAP_MDR1, 0x07); + serial_write_reg(p, UART_OMAP_SCR, 0x08); + serial_write_reg(p, UART_OMAP_MDR1, 0x00); + serial_write_reg(p, UART_OMAP_SYSC, 0x01); +} + +void __init omap_serial_init() +{ + int i; + const struct omap_uart_config *info; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + + info = omap_get_config(OMAP_TAG_UART, + struct omap_uart_config); + + if (info == NULL) + return; + + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->membase = 0; + p->mapbase = 0; + continue; + } + + switch (i) { + case 0: + uart1_ick = clk_get(NULL, "uart1_ick"); + if (IS_ERR(uart1_ick)) + printk("Could not get uart1_ick\n"); + else { + clk_use(uart1_ick); + } + + uart1_fck = clk_get(NULL, "uart1_fck"); + if (IS_ERR(uart1_fck)) + printk("Could not get uart1_fck\n"); + else { + clk_use(uart1_fck); + } + break; + case 1: + uart2_ick = clk_get(NULL, "uart2_ick"); + if (IS_ERR(uart2_ick)) + printk("Could not get uart2_ick\n"); + else { + clk_use(uart2_ick); + } + + uart2_fck = clk_get(NULL, "uart2_fck"); + if (IS_ERR(uart2_fck)) + printk("Could not get uart2_fck\n"); + else { + clk_use(uart2_fck); + } + break; + case 2: + uart3_ick = clk_get(NULL, "uart3_ick"); + if (IS_ERR(uart3_ick)) + printk("Could not get uart3_ick\n"); + else { + clk_use(uart3_ick); + } + + uart3_fck = clk_get(NULL, "uart3_fck"); + if (IS_ERR(uart3_fck)) + printk("Could not get uart3_fck\n"); + else { + clk_use(uart3_fck); + } + break; + } + + omap_serial_reset(p); + } +} + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static int __init omap_init(void) +{ + return platform_device_register(&serial_device); +} +arch_initcall(omap_init); |
