diff options
Diffstat (limited to 'arch/arm/mach-omap2/prm2xxx_3xxx.c')
| -rw-r--r-- | arch/arm/mach-omap2/prm2xxx_3xxx.c | 265 |
1 files changed, 0 insertions, 265 deletions
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9529984d8d2b..0d6cc543987d 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,82 +15,11 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/irq.h> -#include <plat/prcm.h> - -#include "soc.h" #include "common.h" -#include "vp.h" #include "prm2xxx_3xxx.h" -#include "cm2xxx_3xxx.h" #include "prm-regbits-24xx.h" -#include "prm-regbits-34xx.h" - -static const struct omap_prcm_irq omap3_prcm_irqs[] = { - OMAP_PRCM_IRQ("wkup", 0, 0), - OMAP_PRCM_IRQ("io", 9, 1), -}; - -static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { - .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, - .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET, - .nr_regs = 1, - .irqs = omap3_prcm_irqs, - .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), - .irq = 11 + OMAP_INTC_START, - .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, - .ocp_barrier = &omap3xxx_prm_ocp_barrier, - .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, - .restore_irqen = &omap3xxx_prm_restore_irqen, -}; - -u32 omap2_prm_read_mod_reg(s16 module, u16 idx) -{ - return __raw_readl(prm_base + module + idx); -} - -void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) -{ - __raw_writel(val, prm_base + module + idx); -} - -/* Read-modify-write a register in a PRM module. Caller must lock */ -u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) -{ - u32 v; - - v = omap2_prm_read_mod_reg(module, idx); - v &= ~mask; - v |= bits; - omap2_prm_write_mod_reg(v, module, idx); - - return v; -} - -/* Read a PRM register, AND it, and shift the result down to bit 0 */ -u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) -{ - u32 v; - - v = omap2_prm_read_mod_reg(domain, idx); - v &= mask; - v >>= __ffs(mask); - - return v; -} - -u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx); -} - -u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx); -} - /** * omap2_prm_is_hardreset_asserted - read the HW reset line state of @@ -104,9 +33,6 @@ u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) */ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) { - if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) - return -EINVAL; - return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, (1 << shift)); } @@ -127,9 +53,6 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) { u32 mask; - if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) - return -EINVAL; - mask = 1 << shift; omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL); @@ -156,9 +79,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) u32 rst, st; int c; - if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) - return -EINVAL; - rst = 1 << rst_shift; st = 1 << st_shift; @@ -178,188 +98,3 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; } -/* PRM VP */ - -/* - * struct omap3_vp - OMAP3 VP register access description. - * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg - */ -struct omap3_vp { - u32 tranxdone_status; -}; - -static struct omap3_vp omap3_vp[] = { - [OMAP3_VP_VDD_MPU_ID] = { - .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, - }, - [OMAP3_VP_VDD_CORE_ID] = { - .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, - }, -}; - -#define MAX_VP_ID ARRAY_SIZE(omap3_vp); - -u32 omap3_prm_vp_check_txdone(u8 vp_id) -{ - struct omap3_vp *vp = &omap3_vp[vp_id]; - u32 irqstatus; - - irqstatus = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - return irqstatus & vp->tranxdone_status; -} - -void omap3_prm_vp_clear_txdone(u8 vp_id) -{ - struct omap3_vp *vp = &omap3_vp[vp_id]; - - omap2_prm_write_mod_reg(vp->tranxdone_status, - OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); -} - -u32 omap3_prm_vcvp_read(u8 offset) -{ - return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); -} - -void omap3_prm_vcvp_write(u32 val, u8 offset) -{ - omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); -} - -u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) -{ - return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); -} - -/** - * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events - * @events: ptr to a u32, preallocated by caller - * - * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM - * MPU IRQs, and store the result into the u32 pointed to by @events. - * No return value. - */ -void omap3xxx_prm_read_pending_irqs(unsigned long *events) -{ - u32 mask, st; - - /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */ - mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); - st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - - events[0] = mask & st; -} - -/** - * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete - * - * Force any buffered writes to the PRM IP block to complete. Needed - * by the PRM IRQ handler, which reads and writes directly to the IP - * block, to avoid race conditions after acknowledging or clearing IRQ - * bits. No return value. - */ -void omap3xxx_prm_ocp_barrier(void) -{ - omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); -} - -/** - * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg - * @saved_mask: ptr to a u32 array to save IRQENABLE bits - * - * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask - * must be allocated by the caller. Intended to be used in the PRM - * interrupt handler suspend callback. The OCP barrier is needed to - * ensure the write to disable PRM interrupts reaches the PRM before - * returning; otherwise, spurious interrupts might occur. No return - * value. - */ -void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) -{ - saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQENABLE_MPU_OFFSET); - omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); - - /* OCP barrier */ - omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); -} - -/** - * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args - * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously - * - * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended - * to be used in the PRM interrupt handler resume callback to restore - * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP - * barrier should be needed here; any pending PRM interrupts will fire - * once the writes reach the PRM. No return value. - */ -void omap3xxx_prm_restore_irqen(u32 *saved_mask) -{ - omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD, - OMAP3_PRM_IRQENABLE_MPU_OFFSET); -} - -/** - * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain - * - * Clear any previously-latched I/O wakeup events and ensure that the - * I/O wakeup gates are aligned with the current mux settings. Works - * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then - * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No - * return value. - */ -void omap3xxx_prm_reconfigure_io_chain(void) -{ - int i = 0; - - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - - omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & - OMAP3430_ST_IO_CHAIN_MASK, - MAX_IOPAD_LATCH_TIME, i); - if (i == MAX_IOPAD_LATCH_TIME) - pr_warn("PRM: I/O chain clock line assertion timed out\n"); - - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - - omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, - PM_WKST); - - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); -} - -/** - * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches - * - * Activates the I/O wakeup event latches and allows events logged by - * those latches to signal a wakeup event to the PRCM. For I/O - * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux - * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. - * No return value. - */ -static void __init omap3xxx_prm_enable_io_wakeup(void) -{ - if (omap3_has_io_wakeup()) - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, - PM_WKEN); -} - -static int __init omap3xxx_prcm_init(void) -{ - int ret = 0; - - if (cpu_is_omap34xx()) { - omap3xxx_prm_enable_io_wakeup(); - ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - if (!ret) - irq_set_status_flags(omap_prcm_event_to_irq("io"), - IRQ_NOAUTOEN); - } - - return ret; -} -subsys_initcall(omap3xxx_prcm_init); |
