diff options
Diffstat (limited to 'arch/arm/mach-omap2/opp2430_data.c')
| -rw-r--r-- | arch/arm/mach-omap2/opp2430_data.c | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index edb81672c844..1b9596ae201e 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -1,5 +1,5 @@ /* - * opp2420_data.c - old-style "OPP" table for OMAP2420 + * opp2430_data.c - old-style "OPP" table for OMAP2430 * * Copyright (C) 2005-2009 Texas Instruments, Inc. * Copyright (C) 2004-2009 Nokia Corporation @@ -9,16 +9,16 @@ * The OMAP2 processor can be run at several discrete 'PRCM configurations'. * These configurations are characterized by voltage and speed for clocks. * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with + * these combinations is via the 'ratios' which the clocks operate with * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * setting. All configurations can be described by a DPLL setting and a ratio. * * 2430 differs from 2420 in that there are no more phase synchronizers used. * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs * 2430 (iva2.1, NOdsp, mdm) * * XXX Missing voltage data. + * XXX Missing 19.2MHz sys_clk rate sets. * * THe format described in this file is deprecated. Once a reasonable * OPP API exists, the data in this file should be converted to use it. @@ -30,24 +30,24 @@ #include "sdrc.h" #include "clock.h" -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. +/* + * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated. * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, * CM_CLKSEL2_PLL, CM_CLKSEL_MDM * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. + * Filling in table based on 2430-SDPs variants available. There are + * quite a few more rate combinations which could be defined. * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. + * When multiple values are defined the start up will try and choose + * the fastest one. If a 'fast' value is defined, then automatically, + * the /2 one should be included as it can be used. Generally having + * more than one fast set does not make sense, as static timings need + * to be changed to change the set. The exception is the bypass + * setting which is available for low power bypass. * * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ + */ const struct prcm_config omap2430_rate_table[] = { /* PRCM #4 - ratio2 (ES2.1) - FAST */ {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ |
