summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/control.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/control.h')
-rw-r--r--arch/arm/mach-omap2/control.h46
1 files changed, 30 insertions, 16 deletions
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a406fd045ce1..b8cdc8531b60 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -21,6 +21,8 @@
#include <mach/ctrl_module_pad_core_44xx.h>
#include <mach/ctrl_module_pad_wkup_44xx.h>
+#include <plat/am33xx.h>
+
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -28,6 +30,8 @@
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
#else
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -35,6 +39,8 @@
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
#endif /* __ASSEMBLY__ */
/*
@@ -182,6 +188,7 @@
#define OMAP3630_CONTROL_FUSE_OPP120_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120)
#define OMAP3630_CONTROL_FUSE_OPP50_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128)
#define OMAP3630_CONTROL_FUSE_OPP100_VDD2 (OMAP2_CONTROL_GENERAL + 0x012C)
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL (OMAP2_CONTROL_GENERAL + 0x02f0)
/* OMAP44xx control efuse offsets */
#define OMAP44XX_CONTROL_FUSE_IVA_OPP50 0x22C
@@ -246,6 +253,10 @@
/* TI81XX CONTROL_DEVCONF register offsets */
#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000)
+/* OMAP54XX CONTROL STATUS register */
+#define OMAP5XXX_CONTROL_STATUS 0x134
+#define OMAP5_DEVICETYPE_MASK (0x7 << 6)
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
@@ -312,15 +323,15 @@
OMAP343X_SCRATCHPAD + reg)
/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
-#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
-#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
-#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
-#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
-#define AM35XX_USBOTG_FCLK_SHIFT 8
-#define AM35XX_CPGMAC_FCLK_SHIFT 9
-#define AM35XX_VPFE_FCLK_SHIFT 10
-
-/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
+#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
+#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
+#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
+#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
+#define AM35XX_USBOTG_FCLK_SHIFT 8
+#define AM35XX_CPGMAC_FCLK_SHIFT 9
+#define AM35XX_VPFE_FCLK_SHIFT 10
+
+/* AM35XX CONTROL_LVL_INTR_CLEAR bits */
#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0)
#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1)
#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2)
@@ -330,21 +341,22 @@
#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6)
#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7)
-/*AM35XX CONTROL_IP_SW_RESET bits*/
+/* AM35XX CONTROL_IP_SW_RESET bits */
#define AM35XX_USBOTGSS_SW_RST BIT(0)
#define AM35XX_CPGMACSS_SW_RST BIT(1)
#define AM35XX_VPFE_VBUSP_SW_RST BIT(2)
#define AM35XX_HECC_SW_RST BIT(3)
#define AM35XX_VPFE_PCLK_SW_RST BIT(4)
-/*
- * CONTROL AM33XX STATUS register
- */
+/* AM33XX CONTROL_STATUS register */
#define AM33XX_CONTROL_STATUS 0x040
+#define AM33XX_CONTROL_SEC_CLK_CTRL 0x1bc
-/*
- * CONTROL OMAP STATUS register to identify OMAP3 features
- */
+/* AM33XX CONTROL_STATUS bitfields (partial) */
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22)
+
+/* CONTROL OMAP STATUS register to identify OMAP3 features */
#define OMAP3_CONTROL_OMAP_STATUS 0x044c
#define OMAP3_SGX_SHIFT 13
@@ -397,6 +409,8 @@ extern u32 omap3_arm_context[128];
extern void omap3_control_save_context(void);
extern void omap3_control_restore_context(void);
extern void omap3_ctrl_write_boot_mode(u8 bootmode);
+extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
+extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
#else
OpenPOWER on IntegriCloud