diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-h4.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-h4.c | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c new file mode 100644 index 000000000000..f2554469a76a --- /dev/null +++ b/arch/arm/mach-omap2/board-h4.c @@ -0,0 +1,197 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-h4.c + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Modified from mach-omap/omap1/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include <asm/arch/prcm.h> + +#include <asm/io.h> +#include <asm/delay.h> + +static struct mtd_partition h4_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data h4_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = h4_partitions, + .nr_parts = ARRAY_SIZE(h4_partitions), +}; + +static struct resource h4_flash_resource = { + .start = H4_CS0_BASE, + .end = H4_CS0_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device h4_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &h4_flash_data, + }, + .num_resources = 1, + .resource = &h4_flash_resource, +}; + +static struct resource h4_smc91x_resources[] = { + [0] = { + .start = OMAP24XX_ETHR_START, /* Physical */ + .end = OMAP24XX_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device h4_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(h4_smc91x_resources), + .resource = h4_smc91x_resources, +}; + +static struct platform_device *h4_devices[] __initdata = { + &h4_smc91x_device, + &h4_flash_device, +}; + +static inline void __init h4_init_smc91x(void) +{ + /* Make sure CS1 timings are correct */ + GPMC_CONFIG1_1 = 0x00011200; + GPMC_CONFIG2_1 = 0x001f1f01; + GPMC_CONFIG3_1 = 0x00080803; + GPMC_CONFIG4_1 = 0x1c091c09; + GPMC_CONFIG5_1 = 0x041f1f1f; + GPMC_CONFIG6_1 = 0x000004c4; + GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24); + udelay(100); + + omap_cfg_reg(M15_24XX_GPIO92); + if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + OMAP24XX_ETHR_GPIO_IRQ); + return; + } + omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); +} + +static void __init omap_h4_init_irq(void) +{ + omap_init_irq(); + omap_gpio_init(); + h4_init_smc91x(); +} + +static struct omap_uart_config h4_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config h4_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config h4_lcd_config __initdata = { + .panel_name = "h4", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel h4_config[] = { + { OMAP_TAG_UART, &h4_uart_config }, + { OMAP_TAG_MMC, &h4_mmc_config }, + { OMAP_TAG_LCD, &h4_lcd_config }, +}; + +static void __init omap_h4_init(void) +{ + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); + omap_board_config = h4_config; + omap_board_config_size = ARRAY_SIZE(h4_config); + omap_serial_init(); +} + +static void __init omap_h4_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_H4, "OMAP2420 H4 board") + /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ + .phys_ram = 0x80000000, + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_h4_map_io, + .init_irq = omap_h4_init_irq, + .init_machine = omap_h4_init, + .timer = &omap_timer, +MACHINE_END |
