diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-devkit8000.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 64 |
1 files changed, 15 insertions, 49 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 34956ec83296..b6002ec31c6a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -58,7 +58,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #define OMAP_DM9000_GPIO_IRQ 25 @@ -130,13 +129,14 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) gpio_set_value_cansleep(dssdev->reset_gpio, 0); } -static struct regulator_consumer_supply devkit8000_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - +static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; /* ads7846 on SPI */ -static struct regulator_consumer_supply devkit8000_vio_supply = - REGULATOR_SUPPLY("vcc", "spi2.0"); +static struct regulator_consumer_supply devkit8000_vio_supply[] = { + REGULATOR_SUPPLY("vcc", "spi2.0"), +}; static struct panel_generic_dpi_data lcd_panel = { .name = "generic", @@ -186,9 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = { .default_device = &devkit8000_lcd_device, }; -static struct regulator_consumer_supply devkit8000_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), @@ -284,22 +281,8 @@ static struct regulator_init_data devkit8000_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vmmc1_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data devkit8000_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply), + .consumer_supplies = devkit8000_vmmc1_supply, }; /* VPLL1 for digital video outputs */ @@ -327,31 +310,14 @@ static struct regulator_init_data devkit8000_vio = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vio_supply, -}; - -static struct twl4030_usb_data devkit8000_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data devkit8000_audio_data; - -static struct twl4030_codec_data devkit8000_codec_data = { - .audio_mclk = 26000000, - .audio = &devkit8000_audio_data, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply), + .consumer_supplies = devkit8000_vio_supply, }; static struct twl4030_platform_data devkit8000_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &devkit8000_usb_data, .gpio = &devkit8000_gpio_data, - .codec = &devkit8000_codec_data, .vmmc1 = &devkit8000_vmmc1, - .vdac = &devkit8000_vdac, .vpll1 = &devkit8000_vpll1, .vio = &devkit8000_vio, .keypad = &devkit8000_kp_data, @@ -359,6 +325,9 @@ static struct twl4030_platform_data devkit8000_twldata = { static int __init devkit8000_i2c_init(void) { + omap3_pmic_get_config(&devkit8000_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC); omap3_pmic_init("tps65930", &devkit8000_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ @@ -438,10 +407,7 @@ static void __init devkit8000_init_early(void) static void __init devkit8000_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } #define OMAP_DM9000_BASE 0x2c000000 @@ -707,5 +673,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .init_early = devkit8000_init_early, .init_irq = devkit8000_init_irq, .init_machine = devkit8000_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END |
