diff options
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r-- | arch/arm/mach-omap1/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 16 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-fsample.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-htcherald.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-innovator.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-nokia770.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-palmte.c | 13 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-voiceblue.c | 107 | ||||
-rw-r--r-- | arch/arm/mach-omap1/reset.c | 25 |
11 files changed, 104 insertions, 79 deletions
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index ba6009f27677..af98117043d2 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o -obj-y += clock.o clock_data.o opp_data.o +obj-y += clock.o clock_data.o opp_data.o reset.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 22cc8c8df6cb..de88c9297b68 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -165,7 +165,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = { } }; -static struct omap_lcd_config ams_delta_lcd_config __initdata = { +static struct omap_lcd_config ams_delta_lcd_config = { .ctrl_name = "internal", }; @@ -175,7 +175,7 @@ static struct omap_usb_config ams_delta_usb_config __initdata = { .pins[0] = 2, }; -static struct omap_board_config_kernel ams_delta_config[] = { +static struct omap_board_config_kernel ams_delta_config[] __initdata = { { OMAP_TAG_LCD, &ams_delta_lcd_config }, }; @@ -208,14 +208,14 @@ static const struct matrix_keymap_data ams_delta_keymap_data = { .keymap_size = ARRAY_SIZE(ams_delta_keymap), }; -static struct omap_kp_platform_data ams_delta_kp_data = { +static struct omap_kp_platform_data ams_delta_kp_data __initdata = { .rows = 8, .cols = 8, .keymap_data = &ams_delta_keymap_data, .delay = 9, }; -static struct platform_device ams_delta_kp_device = { +static struct platform_device ams_delta_kp_device __initdata = { .name = "omap-keypad", .id = -1, .dev = { @@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device = { .resource = ams_delta_kp_resources, }; -static struct platform_device ams_delta_lcd_device = { +static struct platform_device ams_delta_lcd_device __initdata = { .name = "lcd_ams_delta", .id = -1, }; -static struct platform_device ams_delta_led_device = { +static struct platform_device ams_delta_led_device __initdata = { .name = "ams-delta-led", .id = -1 }; @@ -259,7 +259,7 @@ static int ams_delta_camera_power(struct device *dev, int power) #define ams_delta_camera_power NULL #endif -static struct soc_camera_link __initdata ams_delta_iclink = { +static struct soc_camera_link ams_delta_iclink = { .bus_id = 0, /* OMAP1 SoC camera bus */ .i2c_adapter_id = 1, .board_info = &ams_delta_camera_board_info[0], @@ -267,7 +267,7 @@ static struct soc_camera_link __initdata ams_delta_iclink = { .power = ams_delta_camera_power, }; -static struct platform_device ams_delta_camera_device = { +static struct platform_device ams_delta_camera_device __initdata = { .name = "soc-camera-pdrv", .id = 0, .dev = { diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 0efb9dbae44c..87f173d93557 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -287,11 +287,11 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -static struct omap_lcd_config fsample_lcd_config __initdata = { +static struct omap_lcd_config fsample_lcd_config = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel fsample_config[] = { +static struct omap_board_config_kernel fsample_config[] __initdata = { { OMAP_TAG_LCD, &fsample_lcd_config }, }; diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 28b84aa9bdba..ba3bd09c4754 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -202,7 +202,7 @@ static int h2_nand_dev_ready(struct mtd_info *mtd) static const char *h2_part_probes[] = { "cmdlinepart", NULL }; -struct platform_nand_data h2_nand_platdata = { +static struct platform_nand_data h2_nand_platdata = { .chip = { .nr_chips = 1, .chip_offset = 0, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index dbc8b8d882ba..ac48677672ee 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -204,7 +204,7 @@ static int nand_dev_ready(struct mtd_info *mtd) static const char *part_probes[] = { "cmdlinepart", NULL }; -struct platform_nand_data nand_platdata = { +static struct platform_nand_data nand_platdata = { .chip = { .nr_chips = 1, .chip_offset = 0, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index f2c5c585bc83..ba05a51f9408 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -331,7 +331,7 @@ static struct resource htcpld_resources[] = { }, }; -struct htcpld_chip_platform_data htcpld_chips[] = { +static struct htcpld_chip_platform_data htcpld_chips[] = { [0] = { .addr = 0x03, .reset = 0x04, @@ -366,7 +366,7 @@ struct htcpld_chip_platform_data htcpld_chips[] = { }, }; -struct htcpld_core_platform_data htcpld_pfdata = { +static struct htcpld_core_platform_data htcpld_pfdata = { .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI, .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO, .i2c_adapter_id = 1, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index a36e6742bf9b..2d9b8cbd7a14 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -365,7 +365,7 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC]; -void __init innovator_mmc_init(void) +static void __init innovator_mmc_init(void) { mmc_data[0] = &mmc1_data; omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC); diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index d21f09dc78f4..cfd084926146 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -115,7 +115,7 @@ static struct mipid_platform_data nokia770_mipid_platform_data = { .shutdown = mipid_shutdown, }; -static void mipid_dev_init(void) +static void __init mipid_dev_init(void) { const struct omap_lcd_config *conf; @@ -126,7 +126,7 @@ static void mipid_dev_init(void) } } -static void ads7846_dev_init(void) +static void __init ads7846_dev_init(void) { if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0) printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); @@ -170,7 +170,7 @@ static struct hwa742_platform_data nokia770_hwa742_platform_data = { .te_connected = 1, }; -static void hwa742_dev_init(void) +static void __init hwa742_dev_init(void) { clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index fb51ce6123d8..c9d38f47845f 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -230,19 +230,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = { }, }; -static void palmte_headphones_detect(void *data, int state) -{ - if (state) { - /* Headphones connected, disable speaker */ - gpio_set_value(PALMTE_SPEAKER_GPIO, 0); - printk(KERN_INFO "PM: speaker off\n"); - } else { - /* Headphones unplugged, re-enable speaker */ - gpio_set_value(PALMTE_SPEAKER_GPIO, 1); - printk(KERN_INFO "PM: speaker on\n"); - } -} - static void __init palmte_misc_gpio_setup(void) { /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 815a69ce821d..bdc0ac8dc21f 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -26,10 +26,12 @@ #include <linux/smc91x.h> #include <mach/hardware.h> +#include <mach/system.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <plat/board-voiceblue.h> #include <plat/common.h> #include <mach/gpio.h> #include <plat/flash.h> @@ -163,52 +165,6 @@ static void __init voiceblue_init_irq(void) omap_init_irq(); } -static void __init voiceblue_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - /* Watchdog */ - gpio_request(0, "Watchdog"); - /* smc91x reset */ - gpio_request(7, "SMC91x reset"); - gpio_direction_output(7, 1); - udelay(2); /* wait at least 100ns */ - gpio_set_value(7, 0); - mdelay(50); /* 50ms until PHY ready */ - /* smc91x interrupt pin */ - gpio_request(8, "SMC91x irq"); - /* 16C554 reset*/ - gpio_request(6, "16C554 reset"); - gpio_direction_output(6, 0); - /* 16C554 interrupt pins */ - gpio_request(12, "16C554 irq"); - gpio_request(13, "16C554 irq"); - gpio_request(14, "16C554 irq"); - gpio_request(15, "16C554 irq"); - set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); - - platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_board_config = voiceblue_config; - omap_board_config_size = ARRAY_SIZE(voiceblue_config); - omap_serial_init(); - omap1_usb_init(&voiceblue_usb_config); - omap_register_i2c_bus(1, 100, NULL, 0); - - /* There is a good chance board is going up, so enable power LED - * (it is connected through invertor) */ - omap_writeb(0x00, OMAP_LPG1_LCR); - omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ -} - static void __init voiceblue_map_io(void) { omap1_map_common_io(); @@ -275,8 +231,17 @@ void voiceblue_wdt_ping(void) gpio_set_value(0, wdt_gpio_state); } -void voiceblue_reset(void) +static void voiceblue_reset(char mode, const char *cmd) { + /* + * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 + * "Global Software Reset Affects Traffic Controller Frequency". + */ + if (cpu_is_omap5912()) { + omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL); + omap_writew(0x8, ARM_RSTCT1); + } + set_bit(MACHINE_REBOOT, &machine_state); voiceblue_wdt_enable(); while (1) ; @@ -286,6 +251,54 @@ EXPORT_SYMBOL(voiceblue_wdt_enable); EXPORT_SYMBOL(voiceblue_wdt_disable); EXPORT_SYMBOL(voiceblue_wdt_ping); +static void __init voiceblue_init(void) +{ + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + + /* Watchdog */ + gpio_request(0, "Watchdog"); + /* smc91x reset */ + gpio_request(7, "SMC91x reset"); + gpio_direction_output(7, 1); + udelay(2); /* wait at least 100ns */ + gpio_set_value(7, 0); + mdelay(50); /* 50ms until PHY ready */ + /* smc91x interrupt pin */ + gpio_request(8, "SMC91x irq"); + /* 16C554 reset*/ + gpio_request(6, "16C554 reset"); + gpio_direction_output(6, 0); + /* 16C554 interrupt pins */ + gpio_request(12, "16C554 irq"); + gpio_request(13, "16C554 irq"); + gpio_request(14, "16C554 irq"); + gpio_request(15, "16C554 irq"); + set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); + + platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); + omap_board_config = voiceblue_config; + omap_board_config_size = ARRAY_SIZE(voiceblue_config); + omap_serial_init(); + omap1_usb_init(&voiceblue_usb_config); + omap_register_i2c_bus(1, 100, NULL, 0); + + /* There is a good chance board is going up, so enable power LED + * (it is connected through invertor) */ + omap_writeb(0x00, OMAP_LPG1_LCR); + omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ + + arch_reset = voiceblue_reset; +} + MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl <michl@2n.cz> */ .boot_params = 0x10000100, diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c new file mode 100644 index 000000000000..ad951ee69205 --- /dev/null +++ b/arch/arm/mach-omap1/reset.c @@ -0,0 +1,25 @@ +/* + * OMAP1 reset support + */ +#include <linux/kernel.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/system.h> +#include <plat/prcm.h> + +void omap1_arch_reset(char mode, const char *cmd) +{ + /* + * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 + * "Global Software Reset Affects Traffic Controller Frequency". + */ + if (cpu_is_omap5912()) { + omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL); + omap_writew(0x8, ARM_RSTCT1); + } + + omap_writew(1, ARM_RSTCT1); +} + +void (*arch_reset)(char, const char *) = omap1_arch_reset; |