diff options
Diffstat (limited to 'arch/arm/mach-lh7a40x/lcd-panel.h')
| -rw-r--r-- | arch/arm/mach-lh7a40x/lcd-panel.h | 346 |
1 files changed, 346 insertions, 0 deletions
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h new file mode 100644 index 000000000000..4fb2efc4950f --- /dev/null +++ b/arch/arm/mach-lh7a40x/lcd-panel.h @@ -0,0 +1,346 @@ +/* lcd-panel.h + $Id$ + + written by Marc Singer + 18 Jul 2005 + + Copyright (C) 2005 Marc Singer + + ----------- + DESCRIPTION + ----------- + + Only one panel may be defined at a time. + + The pixel clock is calculated to be no greater than the target. + + Each timing value is accompanied by a specification comment. + + UNITS/MIN/TYP/MAX + + Most of the units will be in clocks. + + USE_RGB555 + + Define this macro to configure the AMBA LCD controller to use an + RGB555 encoding for the pels instead of the normal RGB565. + + LPD9520, LPD79524, LPD7A400, LPD7A404-10, LPD7A404-11 + + These boards are best approximated by 555 for all panels. Some + can use an extra low-order bit of blue in bit 16 of the color + value, but we don't have a way to communicate this non-linear + mapping to the kernel. + +*/ + +#if !defined (__LCD_PANEL_H__) +# define __LCD_PANEL_H__ + +#if defined (MACH_LPD79520)\ + || defined (MACH_LPD79524)\ + || defined (MACH_LPD7A400)\ + || defined (MACH_LPD7A404) +# define USE_RGB555 +#endif + +struct clcd_panel_extra { + unsigned int hrmode; + unsigned int clsen; + unsigned int spsen; + unsigned int pcdel; + unsigned int revdel; + unsigned int lpdel; + unsigned int spldel; + unsigned int pc2del; +}; + +#define NS_TO_CLOCK(ns,c) ((((ns)*((c)/1000) + (1000000 - 1))/1000000)) +#define CLOCK_TO_DIV(e,c) (((c) + (e) - 1)/(e)) + +#if defined CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT + + /* Logic Product Development LCD 3.5" QVGA HRTFT -10 */ + /* Sharp PN LQ035Q7DB02 w/HRTFT controller chip */ + +#define PIX_CLOCK_TARGET (6800000) +#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) +#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) + +static struct clcd_panel lcd_panel = { + .mode = { + .name = "3.5in QVGA (LQ035Q7DB02)", + .xres = 240, + .yres = 320, + .pixclock = PIX_CLOCK, + .left_margin = 16, + .right_margin = 21, + .upper_margin = 8, // line/8/8/8 + .lower_margin = 5, + .hsync_len = 61, + .vsync_len = NS_TO_CLOCK (60, PIX_CLOCK), + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IPC | (PIX_CLOCK_DIVIDER - 2), + .cntl = CNTL_LCDTFT | CNTL_WATERMARK, + .bpp = 16, +}; + +#define HAS_LCD_PANEL_EXTRA + +static struct clcd_panel_extra lcd_panel_extra = { + .hrmode = 1, + .clsen = 1, + .spsen = 1, + .pcdel = 8, + .revdel = 7, + .lpdel = 13, + .spldel = 77, + .pc2del = 208, +}; + +#endif + +#if defined CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 + + /* Logic Product Development LCD 5.7" QVGA -10 */ + /* Sharp PN LQ057Q3DC02 */ + /* QVGA mode, V/Q=LOW */ + +/* From Sharp on 2006.1.3. I believe some of the values are incorrect + * based on the datasheet. + + Timing0 TIMING1 TIMING2 CONTROL + 0x140A0C4C 0x080504EF 0x013F380D 0x00000829 + HBP= 20 VBP= 8 BCD= 0 + HFP= 10 VFP= 5 CPL=319 + HSW= 12 VSW= 1 IOE= 0 + PPL= 19 LPP=239 IPC= 1 + IHS= 1 + IVS= 1 + ACB= 0 + CSEL= 0 + PCD= 13 + + */ + +/* The full horozontal cycle (Th) is clock/360/400/450. */ +/* The full vertical cycle (Tv) is line/251/262/280. */ + +#define PIX_CLOCK_TARGET (6300000) /* -/6.3/7 MHz */ +#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) +#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) + +static struct clcd_panel lcd_panel = { + .mode = { + .name = "5.7in QVGA (LQ057Q3DC02)", + .xres = 320, + .yres = 240, + .pixclock = PIX_CLOCK, + .left_margin = 11, + .right_margin = 400-11-320-2, + .upper_margin = 7, // line/7/7/7 + .lower_margin = 262-7-240-2, + .hsync_len = 2, // clk/2/96/200 + .vsync_len = 2, // line/2/-/34 + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IHS | TIM2_IVS + | (PIX_CLOCK_DIVIDER - 2), + .cntl = CNTL_LCDTFT | CNTL_WATERMARK, + .bpp = 16, +}; + +#endif + +#if defined CONFIG_FB_ARMCLCD_SHARP_LQ64D343 + + /* Logic Product Development LCD 6.4" VGA -10 */ + /* Sharp PN LQ64D343 */ + +/* The full horozontal cycle (Th) is clock/750/800/900. */ +/* The full vertical cycle (Tv) is line/515/525/560. */ + +#define PIX_CLOCK_TARGET (28330000) +#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) +#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) + +static struct clcd_panel lcd_panel = { + .mode = { + .name = "6.4in QVGA (LQ64D343)", + .xres = 640, + .yres = 480, + .pixclock = PIX_CLOCK, + .left_margin = 32, + .right_margin = 800-32-640-96, + .upper_margin = 32, // line/34/34/34 + .lower_margin = 540-32-480-2, + .hsync_len = 96, // clk/2/96/200 + .vsync_len = 2, // line/2/-/34 + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IHS | TIM2_IVS + | (PIX_CLOCK_DIVIDER - 2), + .cntl = CNTL_LCDTFT | CNTL_WATERMARK, + .bpp = 16, +}; + +#endif + +#if defined CONFIG_FB_ARMCLCD_SHARP_LQ10D368 + + /* Logic Product Development LCD 10.4" VGA -10 */ + /* Sharp PN LQ10D368 */ + +#define PIX_CLOCK_TARGET (28330000) +#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) +#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) + +static struct clcd_panel lcd_panel = { + .mode = { + .name = "10.4in VGA (LQ10D368)", + .xres = 640, + .yres = 480, + .pixclock = PIX_CLOCK, + .left_margin = 21, + .right_margin = 15, + .upper_margin = 34, + .lower_margin = 5, + .hsync_len = 96, + .vsync_len = 16, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IHS | TIM2_IVS + | (PIX_CLOCK_DIVIDER - 2), + .cntl = CNTL_LCDTFT | CNTL_WATERMARK, + .bpp = 16, +}; + +#endif + +#if defined CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 + + /* Logic Product Development LCD 12.1" SVGA -10 */ + /* Sharp PN LQ121S1DG41, was LQ121S1DG31 */ + +/* Note that with a 99993900 Hz HCLK, it is not possible to hit the + * target clock frequency range of 35MHz to 42MHz. */ + +/* If the target pixel clock is substantially lower than the panel + * spec, this is done to prevent the LCD display from glitching when + * the CPU is under load. A pixel clock higher than 25MHz + * (empirically determined) will compete with the CPU for bus cycles + * for the Ethernet chip. However, even a pixel clock of 10MHz + * competes with Compact Flash interface during some operations + * (fdisk, e2fsck). And, at that speed the display may have a visible + * flicker. */ + +/* The full horozontal cycle (Th) is clock/832/1056/1395. */ + +#define PIX_CLOCK_TARGET (20000000) +#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) +#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) + +static struct clcd_panel lcd_panel = { + .mode = { + .name = "12.1in SVGA (LQ121S1DG41)", + .xres = 800, + .yres = 600, + .pixclock = PIX_CLOCK, + .left_margin = 89, // ns/5/-/(1/PIX_CLOCK)-10 + .right_margin = 1056-800-89-128, + .upper_margin = 23, // line/23/23/23 + .lower_margin = 44, + .hsync_len = 128, // clk/2/128/200 + .vsync_len = 4, // line/2/4/6 + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IHS | TIM2_IVS + | (PIX_CLOCK_DIVIDER - 2), + .cntl = CNTL_LCDTFT | CNTL_WATERMARK, + .bpp = 16, +}; + +#endif + +#if defined CONFIG_FB_ARMCLCD_HITACHI + + /* Hitachi*/ + /* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */ + +#define PIX_CLOCK_TARGET (49000000) +#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) +#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) + +static struct clcd_panel lcd_panel = { + .mode = { + .name = "Hitachi 800x480", + .xres = 800, + .yres = 480, + .pixclock = PIX_CLOCK, + .left_margin = 88, + .right_margin = 40, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 128, + .vsync_len = 2, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS + | (PIX_CLOCK_DIVIDER - 2), + .cntl = CNTL_LCDTFT | CNTL_WATERMARK, + .bpp = 16, +}; + +#endif + + +#if defined CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE + + /* AU Optotronics A070VW01 7.0 Wide Screen color Display*/ + /* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */ + +#define PIX_CLOCK_TARGET (10000000) +#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) +#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) + +static struct clcd_panel lcd_panel = { + .mode = { + .name = "7.0in Wide (A070VW01)", + .xres = 480, + .yres = 234, + .pixclock = PIX_CLOCK, + .left_margin = 30, + .right_margin = 25, + .upper_margin = 14, + .lower_margin = 12, + .hsync_len = 100, + .vsync_len = 1, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS + | (PIX_CLOCK_DIVIDER - 2), + .cntl = CNTL_LCDTFT | CNTL_WATERMARK, + .bpp = 16, +}; + +#endif + +#undef NS_TO_CLOCK +#undef CLOCK_TO_DIV + +#endif /* __LCD_PANEL_H__ */ |
