diff options
Diffstat (limited to 'arch/arm/mach-ixp4xx')
| -rw-r--r-- | arch/arm/mach-ixp4xx/Kconfig | 10 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/nslu2-pci.c | 77 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/nslu2-power.c | 92 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/nslu2-setup.c | 134 |
5 files changed, 314 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 89762a26495c..385285851cb5 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" +# This entry is placed on top because otherwise it would have +# been shown as a submenu. +config MACH_NSLU2 + bool + prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) + help + Say 'Y' here if you want your kernel to support Linksys's + NSLU2 NAS device. For more information on this platform, + see http://www.nslu2-linux.org + config ARCH_AVILA bool "Avila" help diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index ddecbda4a633..7a15629c18d0 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o ixdp425-setup.o obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c new file mode 100644 index 000000000000..a575f2e0b2c8 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-pci.c + * + * NSLU2 board-level PCI initialization + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/config.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +void __init nslu2_pci_preinit(void) +{ + set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); + + gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); + gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); + gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); + + /* INTD is not configured as GPIO is used + * for the power input button. + */ + + ixp4xx_pci_preinit(); +} + +static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { + IRQ_NSLU2_PCI_INTA, + IRQ_NSLU2_PCI_INTB, + IRQ_NSLU2_PCI_INTC, + }; + + int irq = -1; + + if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && + pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { + irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; + } + + return irq; +} + +struct hw_pci __initdata nslu2_pci = { + .nr_controllers = 1, + .preinit = nslu2_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = nslu2_map_irq, +}; + +int __init nslu2_pci_init(void) /* monkey see, monkey do */ +{ + if (machine_is_nslu2()) + pci_common_init(&nslu2_pci); + + return 0; +} + +subsys_initcall(nslu2_pci_init); diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c new file mode 100644 index 000000000000..18fbc8c0fb30 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -0,0 +1,92 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-power.c + * + * NSLU2 Power/Reset driver + * + * Copyright (C) 2005 Tower Technologies + * + * based on nslu2-io.c + * Copyright (C) 2004 Karen Spearel + * + * Author: Alessandro Zummo <a.zummo@towertech.it> + * Maintainers: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/reboot.h> +#include <linux/interrupt.h> + +#include <asm/mach-types.h> + +extern void ctrl_alt_del(void); + +static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + /* This is the paper-clip reset, it shuts the machine down directly. + */ + machine_power_off(); + + return IRQ_HANDLED; +} + +static int __init nslu2_power_init(void) +{ + if (!(machine_is_nslu2())) + return 0; + + *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ + + set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); + set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); + + gpio_line_isr_clear(NSLU2_RB_GPIO); + gpio_line_isr_clear(NSLU2_PB_GPIO); + + if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler, + SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + NSLU2_RB_IRQ); + + return -EIO; + } + + if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler, + SA_INTERRUPT, "NSLU2 power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + NSLU2_PB_IRQ); + + return -EIO; + } + + return 0; +} + +static void __exit nslu2_power_exit(void) +{ + free_irq(NSLU2_RB_IRQ, NULL); + free_irq(NSLU2_PB_IRQ, NULL); +} + +module_init(nslu2_power_init); +module_exit(nslu2_power_exit); + +MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); +MODULE_DESCRIPTION("NSLU2 Power/Reset driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c new file mode 100644 index 000000000000..289e94cb65c2 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -0,0 +1,134 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-setup.c + * + * NSLU2 board-setup + * + * based ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Author: Mark Rakes <mrakes at mac.com> + * Maintainers: http://www.nslu2-linux.org/ + * + * Fixed missing init_time in MACHINE_START kas11 10/22/04 + * Changed to conform to new style __init ixdp425 kas11 10/22/04 + */ + +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data nslu2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource nslu2_flash_resource = { + .start = NSLU2_FLASH_BASE, + .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nslu2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &nslu2_flash_data, + .num_resources = 1, + .resource = &nslu2_flash_resource, +}; + +static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { + .sda_pin = NSLU2_SDA_PIN, + .scl_pin = NSLU2_SCL_PIN, +}; + +static struct platform_device nslu2_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, + .dev.platform_data = &nslu2_i2c_gpio_pins, + .num_resources = 0, +}; + +static struct resource nslu2_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port nslu2_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device nslu2_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = nslu2_uart_data, + .num_resources = 2, + .resource = nslu2_uart_resources, +}; + +static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash, + &nslu2_uart, +}; + +static void nslu2_power_off(void) +{ + /* This causes the box to drop the power and go dead. */ + + /* enable the pwr cntl gpio */ + gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT); + + /* do the deed */ + gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); +} + +static void __init nslu2_init(void) +{ + ixp4xx_sys_init(); + + pm_power_off = nslu2_power_off; + + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); +} + +MACHINE_START(NSLU2, "Linksys NSLU2") + /* Maintainer: www.nslu2-linux.org */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = nslu2_init, +MACHINE_END |
